OpenCloudOS-Kernel/net/tipc/trace.h

435 lines
13 KiB
C
Raw Normal View History

tipc: enable tracepoints in tipc As for the sake of debugging/tracing, the commit enables tracepoints in TIPC along with some general trace_events as shown below. It also defines some 'tipc_*_dump()' functions that allow to dump TIPC object data whenever needed, that is, for general debug purposes, ie. not just for the trace_events. The following trace_events are now available: - trace_tipc_skb_dump(): allows to trace and dump TIPC msg & skb data, e.g. message type, user, droppable, skb truesize, cloned skb, etc. - trace_tipc_list_dump(): allows to trace and dump any TIPC buffers or queues, e.g. TIPC link transmq, socket receive queue, etc. - trace_tipc_sk_dump(): allows to trace and dump TIPC socket data, e.g. sk state, sk type, connection type, rmem_alloc, socket queues, etc. - trace_tipc_link_dump(): allows to trace and dump TIPC link data, e.g. link state, silent_intv_cnt, gap, bc_gap, link queues, etc. - trace_tipc_node_dump(): allows to trace and dump TIPC node data, e.g. node state, active links, capabilities, link entries, etc. How to use: Put the trace functions at any places where we want to dump TIPC data or events. Note: a) The dump functions will generate raw data only, that is, to offload the trace event's processing, it can require a tool or script to parse the data but this should be simple. b) The trace_tipc_*_dump() should be reserved for a failure cases only (e.g. the retransmission failure case) or where we do not expect to happen too often, then we can consider enabling these events by default since they will almost not take any effects under normal conditions, but once the rare condition or failure occurs, we get the dumped data fully for post-analysis. For other trace purposes, we can reuse these trace classes as template but different events. c) A trace_event is only effective when we enable it. To enable the TIPC trace_events, echo 1 to 'enable' files in the events/tipc/ directory in the 'debugfs' file system. Normally, they are located at: /sys/kernel/debug/tracing/events/tipc/ For example: To enable the tipc_link_dump event: echo 1 > /sys/kernel/debug/tracing/events/tipc/tipc_link_dump/enable To enable all the TIPC trace_events: echo 1 > /sys/kernel/debug/tracing/events/tipc/enable To collect the trace data: cat trace or cat trace_pipe > /trace.out & To disable all the TIPC trace_events: echo 0 > /sys/kernel/debug/tracing/events/tipc/enable To clear the trace buffer: echo > trace d) Like the other trace_events, the feature like 'filter' or 'trigger' is also usable for the tipc trace_events. For more details, have a look at: Documentation/trace/ftrace.txt MAINTAINERS | add two new files 'trace.h' & 'trace.c' in tipc Acked-by: Ying Xue <ying.xue@windriver.com> Tested-by: Ying Xue <ying.xue@windriver.com> Acked-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: Tuong Lien <tuong.t.lien@dektech.com.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-19 10:17:56 +08:00
/*
* net/tipc/trace.h: TIPC tracepoints
*
* Copyright (c) 2018, Ericsson AB
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. Neither the names of the copyright holders nor the names of its
* contributors may be used to endorse or promote products derived from
* this software without specific prior written permission.
*
* Alternatively, this software may be distributed under the terms of the
* GNU General Public License ("GPL") version 2 as published by the Free
* Software Foundation.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "ASIS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
* LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*/
#undef TRACE_SYSTEM
#define TRACE_SYSTEM tipc
#if !defined(_TIPC_TRACE_H) || defined(TRACE_HEADER_MULTI_READ)
#define _TIPC_TRACE_H
#include <linux/tracepoint.h>
#include "core.h"
#include "link.h"
#include "socket.h"
#include "node.h"
#define SKB_LMIN (100)
#define SKB_LMAX (SKB_LMIN * 2)
#define LIST_LMIN (SKB_LMIN * 3)
#define LIST_LMAX (SKB_LMIN * 11)
#define SK_LMIN (SKB_LMIN * 2)
#define SK_LMAX (SKB_LMIN * 11)
#define LINK_LMIN (SKB_LMIN)
#define LINK_LMAX (SKB_LMIN * 16)
#define NODE_LMIN (SKB_LMIN)
#define NODE_LMAX (SKB_LMIN * 11)
#ifndef __TIPC_TRACE_ENUM
#define __TIPC_TRACE_ENUM
enum {
TIPC_DUMP_NONE = 0,
TIPC_DUMP_TRANSMQ = 1,
TIPC_DUMP_BACKLOGQ = (1 << 1),
TIPC_DUMP_DEFERDQ = (1 << 2),
TIPC_DUMP_INPUTQ = (1 << 3),
TIPC_DUMP_WAKEUP = (1 << 4),
TIPC_DUMP_SK_SNDQ = (1 << 8),
TIPC_DUMP_SK_RCVQ = (1 << 9),
TIPC_DUMP_SK_BKLGQ = (1 << 10),
TIPC_DUMP_ALL = 0xffffu
};
#endif
tipc: add trace_events for tipc link The commit adds the new trace_events for TIPC link object: trace_tipc_link_timeout() trace_tipc_link_fsm() trace_tipc_link_reset() trace_tipc_link_too_silent() trace_tipc_link_retrans() trace_tipc_link_bc_ack() trace_tipc_link_conges() And the traces for PROTOCOL messages at building and receiving: trace_tipc_proto_build() trace_tipc_proto_rcv() Note: a) The 'tipc_link_too_silent' event will only happen when the 'silent_intv_cnt' is about to reach the 'abort_limit' value (and the event is enabled). The benefit for this kind of event is that we can get an early indication about TIPC link loss issue due to timeout, then can do some necessary actions for troubleshooting. For example: To trigger the 'tipc_proto_rcv' when the 'too_silent' event occurs: echo 'enable_event:tipc:tipc_proto_rcv' > \ events/tipc/tipc_link_too_silent/trigger And disable it when TIPC link is reset: echo 'disable_event:tipc:tipc_proto_rcv' > \ events/tipc/tipc_link_reset/trigger b) The 'tipc_link_retrans' or 'tipc_link_bc_ack' event is useful to trace TIPC retransmission issues. In addition, the commit adds the 'trace_tipc_list/link_dump()' at the 'retransmission failure' case. Then, if the issue occurs, the link 'transmq' along with the link data can be dumped for post-analysis. These dump events should be enabled by default since it will only take effect when the failure happens. The same approach is also applied for the faulty case that the validation of protocol message is failed. Acked-by: Ying Xue <ying.xue@windriver.com> Tested-by: Ying Xue <ying.xue@windriver.com> Acked-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: Tuong Lien <tuong.t.lien@dektech.com.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-19 10:17:57 +08:00
/* Link & Node FSM states: */
#define state_sym(val) \
__print_symbolic(val, \
{(0xe), "ESTABLISHED" },\
{(0xe << 4), "ESTABLISHING" },\
{(0x1 << 8), "RESET" },\
{(0x2 << 12), "RESETTING" },\
{(0xd << 16), "PEER_RESET" },\
{(0xf << 20), "FAILINGOVER" },\
{(0xc << 24), "SYNCHING" },\
{(0xdd), "SELF_DOWN_PEER_DOWN" },\
{(0xaa), "SELF_UP_PEER_UP" },\
{(0xd1), "SELF_DOWN_PEER_LEAVING" },\
{(0xac), "SELF_UP_PEER_COMING" },\
{(0xca), "SELF_COMING_PEER_UP" },\
{(0x1d), "SELF_LEAVING_PEER_DOWN" },\
{(0xf0), "FAILINGOVER" },\
{(0xcc), "SYNCHING" })
/* Link & Node FSM events: */
#define evt_sym(val) \
__print_symbolic(val, \
{(0xec1ab1e), "ESTABLISH_EVT" },\
{(0x9eed0e), "PEER_RESET_EVT" },\
{(0xfa110e), "FAILURE_EVT" },\
{(0x10ca1d0e), "RESET_EVT" },\
{(0xfa110bee), "FAILOVER_BEGIN_EVT" },\
{(0xfa110ede), "FAILOVER_END_EVT" },\
{(0xc1ccbee), "SYNCH_BEGIN_EVT" },\
{(0xc1ccede), "SYNCH_END_EVT" },\
{(0xece), "SELF_ESTABL_CONTACT_EVT" },\
{(0x1ce), "SELF_LOST_CONTACT_EVT" },\
{(0x9ece), "PEER_ESTABL_CONTACT_EVT" },\
{(0x91ce), "PEER_LOST_CONTACT_EVT" },\
{(0xfbe), "FAILOVER_BEGIN_EVT" },\
{(0xfee), "FAILOVER_END_EVT" },\
{(0xcbe), "SYNCH_BEGIN_EVT" },\
{(0xcee), "SYNCH_END_EVT" })
/* Bearer, net device events: */
#define dev_evt_sym(val) \
__print_symbolic(val, \
{(NETDEV_CHANGE), "NETDEV_CHANGE" },\
{(NETDEV_GOING_DOWN), "NETDEV_GOING_DOWN" },\
{(NETDEV_UP), "NETDEV_UP" },\
{(NETDEV_CHANGEMTU), "NETDEV_CHANGEMTU" },\
{(NETDEV_CHANGEADDR), "NETDEV_CHANGEADDR" },\
{(NETDEV_UNREGISTER), "NETDEV_UNREGISTER" },\
{(NETDEV_CHANGENAME), "NETDEV_CHANGENAME" })
tipc: add trace_events for tipc socket The commit adds the new trace_events for TIPC socket object: trace_tipc_sk_create() trace_tipc_sk_poll() trace_tipc_sk_sendmsg() trace_tipc_sk_sendmcast() trace_tipc_sk_sendstream() trace_tipc_sk_filter_rcv() trace_tipc_sk_advance_rx() trace_tipc_sk_rej_msg() trace_tipc_sk_drop_msg() trace_tipc_sk_release() trace_tipc_sk_shutdown() trace_tipc_sk_overlimit1() trace_tipc_sk_overlimit2() Also, enables the traces for the following cases: - When user creates a TIPC socket; - When user calls poll() on TIPC socket; - When user sends a dgram/mcast/stream message. - When a message is put into the socket 'sk_receive_queue'; - When a message is released from the socket 'sk_receive_queue'; - When a message is rejected (e.g. due to no port, invalid, etc.); - When a message is dropped (e.g. due to wrong message type); - When socket is released; - When socket is shutdown; - When socket rcvq's allocation is overlimit (> 90%); - When socket rcvq + bklq's allocation is overlimit (> 90%); - When the 'TIPC_ERR_OVERLOAD/2' issue happens; Note: a) All the socket traces are designed to be able to trace on a specific socket by either using the 'event filtering' feature on a known socket 'portid' value or the sysctl file: /proc/sys/net/tipc/sk_filter The file determines a 'tuple' for what socket should be traced: (portid, sock type, name type, name lower, name upper) where: + 'portid' is the socket portid generated at socket creating, can be found in the trace outputs or the 'tipc socket list' command printouts; + 'sock type' is the socket type (1 = SOCK_TREAM, ...); + 'name type', 'name lower' and 'name upper' are the service name being connected to or published by the socket. Value '0' means 'ANY', the default tuple value is (0, 0, 0, 0, 0) i.e. the traces happen for every sockets with no filter. b) The 'tipc_sk_overlimit1/2' event is also a conditional trace_event which happens when the socket receive queue (and backlog queue) is about to be overloaded, when the queue allocation is > 90%. Then, when the trace is enabled, the last skbs leading to the TIPC_ERR_OVERLOAD/2 issue can be traced. The trace event is designed as an 'upper watermark' notification that the other traces (e.g. 'tipc_sk_advance_rx' vs 'tipc_sk_filter_rcv') or actions can be triggerred in the meanwhile to see what is going on with the socket queue. In addition, the 'trace_tipc_sk_dump()' is also placed at the 'TIPC_ERR_OVERLOAD/2' case, so the socket and last skb can be dumped for post-analysis. Acked-by: Ying Xue <ying.xue@windriver.com> Tested-by: Ying Xue <ying.xue@windriver.com> Acked-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: Tuong Lien <tuong.t.lien@dektech.com.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-19 10:17:58 +08:00
extern unsigned long sysctl_tipc_sk_filter[5] __read_mostly;
tipc: enable tracepoints in tipc As for the sake of debugging/tracing, the commit enables tracepoints in TIPC along with some general trace_events as shown below. It also defines some 'tipc_*_dump()' functions that allow to dump TIPC object data whenever needed, that is, for general debug purposes, ie. not just for the trace_events. The following trace_events are now available: - trace_tipc_skb_dump(): allows to trace and dump TIPC msg & skb data, e.g. message type, user, droppable, skb truesize, cloned skb, etc. - trace_tipc_list_dump(): allows to trace and dump any TIPC buffers or queues, e.g. TIPC link transmq, socket receive queue, etc. - trace_tipc_sk_dump(): allows to trace and dump TIPC socket data, e.g. sk state, sk type, connection type, rmem_alloc, socket queues, etc. - trace_tipc_link_dump(): allows to trace and dump TIPC link data, e.g. link state, silent_intv_cnt, gap, bc_gap, link queues, etc. - trace_tipc_node_dump(): allows to trace and dump TIPC node data, e.g. node state, active links, capabilities, link entries, etc. How to use: Put the trace functions at any places where we want to dump TIPC data or events. Note: a) The dump functions will generate raw data only, that is, to offload the trace event's processing, it can require a tool or script to parse the data but this should be simple. b) The trace_tipc_*_dump() should be reserved for a failure cases only (e.g. the retransmission failure case) or where we do not expect to happen too often, then we can consider enabling these events by default since they will almost not take any effects under normal conditions, but once the rare condition or failure occurs, we get the dumped data fully for post-analysis. For other trace purposes, we can reuse these trace classes as template but different events. c) A trace_event is only effective when we enable it. To enable the TIPC trace_events, echo 1 to 'enable' files in the events/tipc/ directory in the 'debugfs' file system. Normally, they are located at: /sys/kernel/debug/tracing/events/tipc/ For example: To enable the tipc_link_dump event: echo 1 > /sys/kernel/debug/tracing/events/tipc/tipc_link_dump/enable To enable all the TIPC trace_events: echo 1 > /sys/kernel/debug/tracing/events/tipc/enable To collect the trace data: cat trace or cat trace_pipe > /trace.out & To disable all the TIPC trace_events: echo 0 > /sys/kernel/debug/tracing/events/tipc/enable To clear the trace buffer: echo > trace d) Like the other trace_events, the feature like 'filter' or 'trigger' is also usable for the tipc trace_events. For more details, have a look at: Documentation/trace/ftrace.txt MAINTAINERS | add two new files 'trace.h' & 'trace.c' in tipc Acked-by: Ying Xue <ying.xue@windriver.com> Tested-by: Ying Xue <ying.xue@windriver.com> Acked-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: Tuong Lien <tuong.t.lien@dektech.com.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-19 10:17:56 +08:00
int tipc_skb_dump(struct sk_buff *skb, bool more, char *buf);
int tipc_list_dump(struct sk_buff_head *list, bool more, char *buf);
int tipc_sk_dump(struct sock *sk, u16 dqueues, char *buf);
int tipc_link_dump(struct tipc_link *l, u16 dqueues, char *buf);
int tipc_node_dump(struct tipc_node *n, bool more, char *buf);
tipc: add trace_events for tipc socket The commit adds the new trace_events for TIPC socket object: trace_tipc_sk_create() trace_tipc_sk_poll() trace_tipc_sk_sendmsg() trace_tipc_sk_sendmcast() trace_tipc_sk_sendstream() trace_tipc_sk_filter_rcv() trace_tipc_sk_advance_rx() trace_tipc_sk_rej_msg() trace_tipc_sk_drop_msg() trace_tipc_sk_release() trace_tipc_sk_shutdown() trace_tipc_sk_overlimit1() trace_tipc_sk_overlimit2() Also, enables the traces for the following cases: - When user creates a TIPC socket; - When user calls poll() on TIPC socket; - When user sends a dgram/mcast/stream message. - When a message is put into the socket 'sk_receive_queue'; - When a message is released from the socket 'sk_receive_queue'; - When a message is rejected (e.g. due to no port, invalid, etc.); - When a message is dropped (e.g. due to wrong message type); - When socket is released; - When socket is shutdown; - When socket rcvq's allocation is overlimit (> 90%); - When socket rcvq + bklq's allocation is overlimit (> 90%); - When the 'TIPC_ERR_OVERLOAD/2' issue happens; Note: a) All the socket traces are designed to be able to trace on a specific socket by either using the 'event filtering' feature on a known socket 'portid' value or the sysctl file: /proc/sys/net/tipc/sk_filter The file determines a 'tuple' for what socket should be traced: (portid, sock type, name type, name lower, name upper) where: + 'portid' is the socket portid generated at socket creating, can be found in the trace outputs or the 'tipc socket list' command printouts; + 'sock type' is the socket type (1 = SOCK_TREAM, ...); + 'name type', 'name lower' and 'name upper' are the service name being connected to or published by the socket. Value '0' means 'ANY', the default tuple value is (0, 0, 0, 0, 0) i.e. the traces happen for every sockets with no filter. b) The 'tipc_sk_overlimit1/2' event is also a conditional trace_event which happens when the socket receive queue (and backlog queue) is about to be overloaded, when the queue allocation is > 90%. Then, when the trace is enabled, the last skbs leading to the TIPC_ERR_OVERLOAD/2 issue can be traced. The trace event is designed as an 'upper watermark' notification that the other traces (e.g. 'tipc_sk_advance_rx' vs 'tipc_sk_filter_rcv') or actions can be triggerred in the meanwhile to see what is going on with the socket queue. In addition, the 'trace_tipc_sk_dump()' is also placed at the 'TIPC_ERR_OVERLOAD/2' case, so the socket and last skb can be dumped for post-analysis. Acked-by: Ying Xue <ying.xue@windriver.com> Tested-by: Ying Xue <ying.xue@windriver.com> Acked-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: Tuong Lien <tuong.t.lien@dektech.com.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-19 10:17:58 +08:00
bool tipc_sk_filtering(struct sock *sk);
tipc: enable tracepoints in tipc As for the sake of debugging/tracing, the commit enables tracepoints in TIPC along with some general trace_events as shown below. It also defines some 'tipc_*_dump()' functions that allow to dump TIPC object data whenever needed, that is, for general debug purposes, ie. not just for the trace_events. The following trace_events are now available: - trace_tipc_skb_dump(): allows to trace and dump TIPC msg & skb data, e.g. message type, user, droppable, skb truesize, cloned skb, etc. - trace_tipc_list_dump(): allows to trace and dump any TIPC buffers or queues, e.g. TIPC link transmq, socket receive queue, etc. - trace_tipc_sk_dump(): allows to trace and dump TIPC socket data, e.g. sk state, sk type, connection type, rmem_alloc, socket queues, etc. - trace_tipc_link_dump(): allows to trace and dump TIPC link data, e.g. link state, silent_intv_cnt, gap, bc_gap, link queues, etc. - trace_tipc_node_dump(): allows to trace and dump TIPC node data, e.g. node state, active links, capabilities, link entries, etc. How to use: Put the trace functions at any places where we want to dump TIPC data or events. Note: a) The dump functions will generate raw data only, that is, to offload the trace event's processing, it can require a tool or script to parse the data but this should be simple. b) The trace_tipc_*_dump() should be reserved for a failure cases only (e.g. the retransmission failure case) or where we do not expect to happen too often, then we can consider enabling these events by default since they will almost not take any effects under normal conditions, but once the rare condition or failure occurs, we get the dumped data fully for post-analysis. For other trace purposes, we can reuse these trace classes as template but different events. c) A trace_event is only effective when we enable it. To enable the TIPC trace_events, echo 1 to 'enable' files in the events/tipc/ directory in the 'debugfs' file system. Normally, they are located at: /sys/kernel/debug/tracing/events/tipc/ For example: To enable the tipc_link_dump event: echo 1 > /sys/kernel/debug/tracing/events/tipc/tipc_link_dump/enable To enable all the TIPC trace_events: echo 1 > /sys/kernel/debug/tracing/events/tipc/enable To collect the trace data: cat trace or cat trace_pipe > /trace.out & To disable all the TIPC trace_events: echo 0 > /sys/kernel/debug/tracing/events/tipc/enable To clear the trace buffer: echo > trace d) Like the other trace_events, the feature like 'filter' or 'trigger' is also usable for the tipc trace_events. For more details, have a look at: Documentation/trace/ftrace.txt MAINTAINERS | add two new files 'trace.h' & 'trace.c' in tipc Acked-by: Ying Xue <ying.xue@windriver.com> Tested-by: Ying Xue <ying.xue@windriver.com> Acked-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: Tuong Lien <tuong.t.lien@dektech.com.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-19 10:17:56 +08:00
DECLARE_EVENT_CLASS(tipc_skb_class,
TP_PROTO(struct sk_buff *skb, bool more, const char *header),
TP_ARGS(skb, more, header),
TP_STRUCT__entry(
__string(header, header)
__dynamic_array(char, buf, (more) ? SKB_LMAX : SKB_LMIN)
),
TP_fast_assign(
__assign_str(header, header);
tipc_skb_dump(skb, more, __get_str(buf));
),
TP_printk("%s\n%s", __get_str(header), __get_str(buf))
)
#define DEFINE_SKB_EVENT(name) \
DEFINE_EVENT(tipc_skb_class, name, \
TP_PROTO(struct sk_buff *skb, bool more, const char *header), \
TP_ARGS(skb, more, header))
DEFINE_SKB_EVENT(tipc_skb_dump);
tipc: add trace_events for tipc link The commit adds the new trace_events for TIPC link object: trace_tipc_link_timeout() trace_tipc_link_fsm() trace_tipc_link_reset() trace_tipc_link_too_silent() trace_tipc_link_retrans() trace_tipc_link_bc_ack() trace_tipc_link_conges() And the traces for PROTOCOL messages at building and receiving: trace_tipc_proto_build() trace_tipc_proto_rcv() Note: a) The 'tipc_link_too_silent' event will only happen when the 'silent_intv_cnt' is about to reach the 'abort_limit' value (and the event is enabled). The benefit for this kind of event is that we can get an early indication about TIPC link loss issue due to timeout, then can do some necessary actions for troubleshooting. For example: To trigger the 'tipc_proto_rcv' when the 'too_silent' event occurs: echo 'enable_event:tipc:tipc_proto_rcv' > \ events/tipc/tipc_link_too_silent/trigger And disable it when TIPC link is reset: echo 'disable_event:tipc:tipc_proto_rcv' > \ events/tipc/tipc_link_reset/trigger b) The 'tipc_link_retrans' or 'tipc_link_bc_ack' event is useful to trace TIPC retransmission issues. In addition, the commit adds the 'trace_tipc_list/link_dump()' at the 'retransmission failure' case. Then, if the issue occurs, the link 'transmq' along with the link data can be dumped for post-analysis. These dump events should be enabled by default since it will only take effect when the failure happens. The same approach is also applied for the faulty case that the validation of protocol message is failed. Acked-by: Ying Xue <ying.xue@windriver.com> Tested-by: Ying Xue <ying.xue@windriver.com> Acked-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: Tuong Lien <tuong.t.lien@dektech.com.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-19 10:17:57 +08:00
DEFINE_SKB_EVENT(tipc_proto_build);
DEFINE_SKB_EVENT(tipc_proto_rcv);
tipc: enable tracepoints in tipc As for the sake of debugging/tracing, the commit enables tracepoints in TIPC along with some general trace_events as shown below. It also defines some 'tipc_*_dump()' functions that allow to dump TIPC object data whenever needed, that is, for general debug purposes, ie. not just for the trace_events. The following trace_events are now available: - trace_tipc_skb_dump(): allows to trace and dump TIPC msg & skb data, e.g. message type, user, droppable, skb truesize, cloned skb, etc. - trace_tipc_list_dump(): allows to trace and dump any TIPC buffers or queues, e.g. TIPC link transmq, socket receive queue, etc. - trace_tipc_sk_dump(): allows to trace and dump TIPC socket data, e.g. sk state, sk type, connection type, rmem_alloc, socket queues, etc. - trace_tipc_link_dump(): allows to trace and dump TIPC link data, e.g. link state, silent_intv_cnt, gap, bc_gap, link queues, etc. - trace_tipc_node_dump(): allows to trace and dump TIPC node data, e.g. node state, active links, capabilities, link entries, etc. How to use: Put the trace functions at any places where we want to dump TIPC data or events. Note: a) The dump functions will generate raw data only, that is, to offload the trace event's processing, it can require a tool or script to parse the data but this should be simple. b) The trace_tipc_*_dump() should be reserved for a failure cases only (e.g. the retransmission failure case) or where we do not expect to happen too often, then we can consider enabling these events by default since they will almost not take any effects under normal conditions, but once the rare condition or failure occurs, we get the dumped data fully for post-analysis. For other trace purposes, we can reuse these trace classes as template but different events. c) A trace_event is only effective when we enable it. To enable the TIPC trace_events, echo 1 to 'enable' files in the events/tipc/ directory in the 'debugfs' file system. Normally, they are located at: /sys/kernel/debug/tracing/events/tipc/ For example: To enable the tipc_link_dump event: echo 1 > /sys/kernel/debug/tracing/events/tipc/tipc_link_dump/enable To enable all the TIPC trace_events: echo 1 > /sys/kernel/debug/tracing/events/tipc/enable To collect the trace data: cat trace or cat trace_pipe > /trace.out & To disable all the TIPC trace_events: echo 0 > /sys/kernel/debug/tracing/events/tipc/enable To clear the trace buffer: echo > trace d) Like the other trace_events, the feature like 'filter' or 'trigger' is also usable for the tipc trace_events. For more details, have a look at: Documentation/trace/ftrace.txt MAINTAINERS | add two new files 'trace.h' & 'trace.c' in tipc Acked-by: Ying Xue <ying.xue@windriver.com> Tested-by: Ying Xue <ying.xue@windriver.com> Acked-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: Tuong Lien <tuong.t.lien@dektech.com.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-19 10:17:56 +08:00
DECLARE_EVENT_CLASS(tipc_list_class,
TP_PROTO(struct sk_buff_head *list, bool more, const char *header),
TP_ARGS(list, more, header),
TP_STRUCT__entry(
__string(header, header)
__dynamic_array(char, buf, (more) ? LIST_LMAX : LIST_LMIN)
),
TP_fast_assign(
__assign_str(header, header);
tipc_list_dump(list, more, __get_str(buf));
),
TP_printk("%s\n%s", __get_str(header), __get_str(buf))
);
#define DEFINE_LIST_EVENT(name) \
DEFINE_EVENT(tipc_list_class, name, \
TP_PROTO(struct sk_buff_head *list, bool more, const char *header), \
TP_ARGS(list, more, header))
DEFINE_LIST_EVENT(tipc_list_dump);
DECLARE_EVENT_CLASS(tipc_sk_class,
TP_PROTO(struct sock *sk, struct sk_buff *skb, u16 dqueues,
const char *header),
TP_ARGS(sk, skb, dqueues, header),
TP_STRUCT__entry(
__string(header, header)
__field(u32, portid)
__dynamic_array(char, buf, (dqueues) ? SK_LMAX : SK_LMIN)
__dynamic_array(char, skb_buf, (skb) ? SKB_LMIN : 1)
),
TP_fast_assign(
__assign_str(header, header);
__entry->portid = tipc_sock_get_portid(sk);
tipc_sk_dump(sk, dqueues, __get_str(buf));
if (skb)
tipc_skb_dump(skb, false, __get_str(skb_buf));
else
*(__get_str(skb_buf)) = '\0';
),
TP_printk("<%u> %s\n%s%s", __entry->portid, __get_str(header),
__get_str(skb_buf), __get_str(buf))
);
tipc: add trace_events for tipc socket The commit adds the new trace_events for TIPC socket object: trace_tipc_sk_create() trace_tipc_sk_poll() trace_tipc_sk_sendmsg() trace_tipc_sk_sendmcast() trace_tipc_sk_sendstream() trace_tipc_sk_filter_rcv() trace_tipc_sk_advance_rx() trace_tipc_sk_rej_msg() trace_tipc_sk_drop_msg() trace_tipc_sk_release() trace_tipc_sk_shutdown() trace_tipc_sk_overlimit1() trace_tipc_sk_overlimit2() Also, enables the traces for the following cases: - When user creates a TIPC socket; - When user calls poll() on TIPC socket; - When user sends a dgram/mcast/stream message. - When a message is put into the socket 'sk_receive_queue'; - When a message is released from the socket 'sk_receive_queue'; - When a message is rejected (e.g. due to no port, invalid, etc.); - When a message is dropped (e.g. due to wrong message type); - When socket is released; - When socket is shutdown; - When socket rcvq's allocation is overlimit (> 90%); - When socket rcvq + bklq's allocation is overlimit (> 90%); - When the 'TIPC_ERR_OVERLOAD/2' issue happens; Note: a) All the socket traces are designed to be able to trace on a specific socket by either using the 'event filtering' feature on a known socket 'portid' value or the sysctl file: /proc/sys/net/tipc/sk_filter The file determines a 'tuple' for what socket should be traced: (portid, sock type, name type, name lower, name upper) where: + 'portid' is the socket portid generated at socket creating, can be found in the trace outputs or the 'tipc socket list' command printouts; + 'sock type' is the socket type (1 = SOCK_TREAM, ...); + 'name type', 'name lower' and 'name upper' are the service name being connected to or published by the socket. Value '0' means 'ANY', the default tuple value is (0, 0, 0, 0, 0) i.e. the traces happen for every sockets with no filter. b) The 'tipc_sk_overlimit1/2' event is also a conditional trace_event which happens when the socket receive queue (and backlog queue) is about to be overloaded, when the queue allocation is > 90%. Then, when the trace is enabled, the last skbs leading to the TIPC_ERR_OVERLOAD/2 issue can be traced. The trace event is designed as an 'upper watermark' notification that the other traces (e.g. 'tipc_sk_advance_rx' vs 'tipc_sk_filter_rcv') or actions can be triggerred in the meanwhile to see what is going on with the socket queue. In addition, the 'trace_tipc_sk_dump()' is also placed at the 'TIPC_ERR_OVERLOAD/2' case, so the socket and last skb can be dumped for post-analysis. Acked-by: Ying Xue <ying.xue@windriver.com> Tested-by: Ying Xue <ying.xue@windriver.com> Acked-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: Tuong Lien <tuong.t.lien@dektech.com.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-19 10:17:58 +08:00
#define DEFINE_SK_EVENT_FILTER(name) \
DEFINE_EVENT_CONDITION(tipc_sk_class, name, \
TP_PROTO(struct sock *sk, struct sk_buff *skb, u16 dqueues, \
const char *header), \
TP_ARGS(sk, skb, dqueues, header), \
TP_CONDITION(tipc_sk_filtering(sk)))
DEFINE_SK_EVENT_FILTER(tipc_sk_dump);
DEFINE_SK_EVENT_FILTER(tipc_sk_create);
DEFINE_SK_EVENT_FILTER(tipc_sk_sendmcast);
DEFINE_SK_EVENT_FILTER(tipc_sk_sendmsg);
DEFINE_SK_EVENT_FILTER(tipc_sk_sendstream);
DEFINE_SK_EVENT_FILTER(tipc_sk_poll);
DEFINE_SK_EVENT_FILTER(tipc_sk_filter_rcv);
DEFINE_SK_EVENT_FILTER(tipc_sk_advance_rx);
DEFINE_SK_EVENT_FILTER(tipc_sk_rej_msg);
DEFINE_SK_EVENT_FILTER(tipc_sk_drop_msg);
DEFINE_SK_EVENT_FILTER(tipc_sk_release);
DEFINE_SK_EVENT_FILTER(tipc_sk_shutdown);
#define DEFINE_SK_EVENT_FILTER_COND(name, cond) \
DEFINE_EVENT_CONDITION(tipc_sk_class, name, \
tipc: enable tracepoints in tipc As for the sake of debugging/tracing, the commit enables tracepoints in TIPC along with some general trace_events as shown below. It also defines some 'tipc_*_dump()' functions that allow to dump TIPC object data whenever needed, that is, for general debug purposes, ie. not just for the trace_events. The following trace_events are now available: - trace_tipc_skb_dump(): allows to trace and dump TIPC msg & skb data, e.g. message type, user, droppable, skb truesize, cloned skb, etc. - trace_tipc_list_dump(): allows to trace and dump any TIPC buffers or queues, e.g. TIPC link transmq, socket receive queue, etc. - trace_tipc_sk_dump(): allows to trace and dump TIPC socket data, e.g. sk state, sk type, connection type, rmem_alloc, socket queues, etc. - trace_tipc_link_dump(): allows to trace and dump TIPC link data, e.g. link state, silent_intv_cnt, gap, bc_gap, link queues, etc. - trace_tipc_node_dump(): allows to trace and dump TIPC node data, e.g. node state, active links, capabilities, link entries, etc. How to use: Put the trace functions at any places where we want to dump TIPC data or events. Note: a) The dump functions will generate raw data only, that is, to offload the trace event's processing, it can require a tool or script to parse the data but this should be simple. b) The trace_tipc_*_dump() should be reserved for a failure cases only (e.g. the retransmission failure case) or where we do not expect to happen too often, then we can consider enabling these events by default since they will almost not take any effects under normal conditions, but once the rare condition or failure occurs, we get the dumped data fully for post-analysis. For other trace purposes, we can reuse these trace classes as template but different events. c) A trace_event is only effective when we enable it. To enable the TIPC trace_events, echo 1 to 'enable' files in the events/tipc/ directory in the 'debugfs' file system. Normally, they are located at: /sys/kernel/debug/tracing/events/tipc/ For example: To enable the tipc_link_dump event: echo 1 > /sys/kernel/debug/tracing/events/tipc/tipc_link_dump/enable To enable all the TIPC trace_events: echo 1 > /sys/kernel/debug/tracing/events/tipc/enable To collect the trace data: cat trace or cat trace_pipe > /trace.out & To disable all the TIPC trace_events: echo 0 > /sys/kernel/debug/tracing/events/tipc/enable To clear the trace buffer: echo > trace d) Like the other trace_events, the feature like 'filter' or 'trigger' is also usable for the tipc trace_events. For more details, have a look at: Documentation/trace/ftrace.txt MAINTAINERS | add two new files 'trace.h' & 'trace.c' in tipc Acked-by: Ying Xue <ying.xue@windriver.com> Tested-by: Ying Xue <ying.xue@windriver.com> Acked-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: Tuong Lien <tuong.t.lien@dektech.com.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-19 10:17:56 +08:00
TP_PROTO(struct sock *sk, struct sk_buff *skb, u16 dqueues, \
const char *header), \
tipc: add trace_events for tipc socket The commit adds the new trace_events for TIPC socket object: trace_tipc_sk_create() trace_tipc_sk_poll() trace_tipc_sk_sendmsg() trace_tipc_sk_sendmcast() trace_tipc_sk_sendstream() trace_tipc_sk_filter_rcv() trace_tipc_sk_advance_rx() trace_tipc_sk_rej_msg() trace_tipc_sk_drop_msg() trace_tipc_sk_release() trace_tipc_sk_shutdown() trace_tipc_sk_overlimit1() trace_tipc_sk_overlimit2() Also, enables the traces for the following cases: - When user creates a TIPC socket; - When user calls poll() on TIPC socket; - When user sends a dgram/mcast/stream message. - When a message is put into the socket 'sk_receive_queue'; - When a message is released from the socket 'sk_receive_queue'; - When a message is rejected (e.g. due to no port, invalid, etc.); - When a message is dropped (e.g. due to wrong message type); - When socket is released; - When socket is shutdown; - When socket rcvq's allocation is overlimit (> 90%); - When socket rcvq + bklq's allocation is overlimit (> 90%); - When the 'TIPC_ERR_OVERLOAD/2' issue happens; Note: a) All the socket traces are designed to be able to trace on a specific socket by either using the 'event filtering' feature on a known socket 'portid' value or the sysctl file: /proc/sys/net/tipc/sk_filter The file determines a 'tuple' for what socket should be traced: (portid, sock type, name type, name lower, name upper) where: + 'portid' is the socket portid generated at socket creating, can be found in the trace outputs or the 'tipc socket list' command printouts; + 'sock type' is the socket type (1 = SOCK_TREAM, ...); + 'name type', 'name lower' and 'name upper' are the service name being connected to or published by the socket. Value '0' means 'ANY', the default tuple value is (0, 0, 0, 0, 0) i.e. the traces happen for every sockets with no filter. b) The 'tipc_sk_overlimit1/2' event is also a conditional trace_event which happens when the socket receive queue (and backlog queue) is about to be overloaded, when the queue allocation is > 90%. Then, when the trace is enabled, the last skbs leading to the TIPC_ERR_OVERLOAD/2 issue can be traced. The trace event is designed as an 'upper watermark' notification that the other traces (e.g. 'tipc_sk_advance_rx' vs 'tipc_sk_filter_rcv') or actions can be triggerred in the meanwhile to see what is going on with the socket queue. In addition, the 'trace_tipc_sk_dump()' is also placed at the 'TIPC_ERR_OVERLOAD/2' case, so the socket and last skb can be dumped for post-analysis. Acked-by: Ying Xue <ying.xue@windriver.com> Tested-by: Ying Xue <ying.xue@windriver.com> Acked-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: Tuong Lien <tuong.t.lien@dektech.com.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-19 10:17:58 +08:00
TP_ARGS(sk, skb, dqueues, header), \
TP_CONDITION(tipc_sk_filtering(sk) && (cond)))
DEFINE_SK_EVENT_FILTER_COND(tipc_sk_overlimit1, tipc_sk_overlimit1(sk, skb));
DEFINE_SK_EVENT_FILTER_COND(tipc_sk_overlimit2, tipc_sk_overlimit2(sk, skb));
tipc: enable tracepoints in tipc As for the sake of debugging/tracing, the commit enables tracepoints in TIPC along with some general trace_events as shown below. It also defines some 'tipc_*_dump()' functions that allow to dump TIPC object data whenever needed, that is, for general debug purposes, ie. not just for the trace_events. The following trace_events are now available: - trace_tipc_skb_dump(): allows to trace and dump TIPC msg & skb data, e.g. message type, user, droppable, skb truesize, cloned skb, etc. - trace_tipc_list_dump(): allows to trace and dump any TIPC buffers or queues, e.g. TIPC link transmq, socket receive queue, etc. - trace_tipc_sk_dump(): allows to trace and dump TIPC socket data, e.g. sk state, sk type, connection type, rmem_alloc, socket queues, etc. - trace_tipc_link_dump(): allows to trace and dump TIPC link data, e.g. link state, silent_intv_cnt, gap, bc_gap, link queues, etc. - trace_tipc_node_dump(): allows to trace and dump TIPC node data, e.g. node state, active links, capabilities, link entries, etc. How to use: Put the trace functions at any places where we want to dump TIPC data or events. Note: a) The dump functions will generate raw data only, that is, to offload the trace event's processing, it can require a tool or script to parse the data but this should be simple. b) The trace_tipc_*_dump() should be reserved for a failure cases only (e.g. the retransmission failure case) or where we do not expect to happen too often, then we can consider enabling these events by default since they will almost not take any effects under normal conditions, but once the rare condition or failure occurs, we get the dumped data fully for post-analysis. For other trace purposes, we can reuse these trace classes as template but different events. c) A trace_event is only effective when we enable it. To enable the TIPC trace_events, echo 1 to 'enable' files in the events/tipc/ directory in the 'debugfs' file system. Normally, they are located at: /sys/kernel/debug/tracing/events/tipc/ For example: To enable the tipc_link_dump event: echo 1 > /sys/kernel/debug/tracing/events/tipc/tipc_link_dump/enable To enable all the TIPC trace_events: echo 1 > /sys/kernel/debug/tracing/events/tipc/enable To collect the trace data: cat trace or cat trace_pipe > /trace.out & To disable all the TIPC trace_events: echo 0 > /sys/kernel/debug/tracing/events/tipc/enable To clear the trace buffer: echo > trace d) Like the other trace_events, the feature like 'filter' or 'trigger' is also usable for the tipc trace_events. For more details, have a look at: Documentation/trace/ftrace.txt MAINTAINERS | add two new files 'trace.h' & 'trace.c' in tipc Acked-by: Ying Xue <ying.xue@windriver.com> Tested-by: Ying Xue <ying.xue@windriver.com> Acked-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: Tuong Lien <tuong.t.lien@dektech.com.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-19 10:17:56 +08:00
DECLARE_EVENT_CLASS(tipc_link_class,
TP_PROTO(struct tipc_link *l, u16 dqueues, const char *header),
TP_ARGS(l, dqueues, header),
TP_STRUCT__entry(
__string(header, header)
__array(char, name, TIPC_MAX_LINK_NAME)
__dynamic_array(char, buf, (dqueues) ? LINK_LMAX : LINK_LMIN)
),
TP_fast_assign(
__assign_str(header, header);
memcpy(__entry->name, tipc_link_name(l), TIPC_MAX_LINK_NAME);
tipc: enable tracepoints in tipc As for the sake of debugging/tracing, the commit enables tracepoints in TIPC along with some general trace_events as shown below. It also defines some 'tipc_*_dump()' functions that allow to dump TIPC object data whenever needed, that is, for general debug purposes, ie. not just for the trace_events. The following trace_events are now available: - trace_tipc_skb_dump(): allows to trace and dump TIPC msg & skb data, e.g. message type, user, droppable, skb truesize, cloned skb, etc. - trace_tipc_list_dump(): allows to trace and dump any TIPC buffers or queues, e.g. TIPC link transmq, socket receive queue, etc. - trace_tipc_sk_dump(): allows to trace and dump TIPC socket data, e.g. sk state, sk type, connection type, rmem_alloc, socket queues, etc. - trace_tipc_link_dump(): allows to trace and dump TIPC link data, e.g. link state, silent_intv_cnt, gap, bc_gap, link queues, etc. - trace_tipc_node_dump(): allows to trace and dump TIPC node data, e.g. node state, active links, capabilities, link entries, etc. How to use: Put the trace functions at any places where we want to dump TIPC data or events. Note: a) The dump functions will generate raw data only, that is, to offload the trace event's processing, it can require a tool or script to parse the data but this should be simple. b) The trace_tipc_*_dump() should be reserved for a failure cases only (e.g. the retransmission failure case) or where we do not expect to happen too often, then we can consider enabling these events by default since they will almost not take any effects under normal conditions, but once the rare condition or failure occurs, we get the dumped data fully for post-analysis. For other trace purposes, we can reuse these trace classes as template but different events. c) A trace_event is only effective when we enable it. To enable the TIPC trace_events, echo 1 to 'enable' files in the events/tipc/ directory in the 'debugfs' file system. Normally, they are located at: /sys/kernel/debug/tracing/events/tipc/ For example: To enable the tipc_link_dump event: echo 1 > /sys/kernel/debug/tracing/events/tipc/tipc_link_dump/enable To enable all the TIPC trace_events: echo 1 > /sys/kernel/debug/tracing/events/tipc/enable To collect the trace data: cat trace or cat trace_pipe > /trace.out & To disable all the TIPC trace_events: echo 0 > /sys/kernel/debug/tracing/events/tipc/enable To clear the trace buffer: echo > trace d) Like the other trace_events, the feature like 'filter' or 'trigger' is also usable for the tipc trace_events. For more details, have a look at: Documentation/trace/ftrace.txt MAINTAINERS | add two new files 'trace.h' & 'trace.c' in tipc Acked-by: Ying Xue <ying.xue@windriver.com> Tested-by: Ying Xue <ying.xue@windriver.com> Acked-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: Tuong Lien <tuong.t.lien@dektech.com.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-19 10:17:56 +08:00
tipc_link_dump(l, dqueues, __get_str(buf));
),
TP_printk("<%s> %s\n%s", __entry->name, __get_str(header),
__get_str(buf))
);
#define DEFINE_LINK_EVENT(name) \
DEFINE_EVENT(tipc_link_class, name, \
TP_PROTO(struct tipc_link *l, u16 dqueues, const char *header), \
TP_ARGS(l, dqueues, header))
DEFINE_LINK_EVENT(tipc_link_dump);
tipc: add trace_events for tipc link The commit adds the new trace_events for TIPC link object: trace_tipc_link_timeout() trace_tipc_link_fsm() trace_tipc_link_reset() trace_tipc_link_too_silent() trace_tipc_link_retrans() trace_tipc_link_bc_ack() trace_tipc_link_conges() And the traces for PROTOCOL messages at building and receiving: trace_tipc_proto_build() trace_tipc_proto_rcv() Note: a) The 'tipc_link_too_silent' event will only happen when the 'silent_intv_cnt' is about to reach the 'abort_limit' value (and the event is enabled). The benefit for this kind of event is that we can get an early indication about TIPC link loss issue due to timeout, then can do some necessary actions for troubleshooting. For example: To trigger the 'tipc_proto_rcv' when the 'too_silent' event occurs: echo 'enable_event:tipc:tipc_proto_rcv' > \ events/tipc/tipc_link_too_silent/trigger And disable it when TIPC link is reset: echo 'disable_event:tipc:tipc_proto_rcv' > \ events/tipc/tipc_link_reset/trigger b) The 'tipc_link_retrans' or 'tipc_link_bc_ack' event is useful to trace TIPC retransmission issues. In addition, the commit adds the 'trace_tipc_list/link_dump()' at the 'retransmission failure' case. Then, if the issue occurs, the link 'transmq' along with the link data can be dumped for post-analysis. These dump events should be enabled by default since it will only take effect when the failure happens. The same approach is also applied for the faulty case that the validation of protocol message is failed. Acked-by: Ying Xue <ying.xue@windriver.com> Tested-by: Ying Xue <ying.xue@windriver.com> Acked-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: Tuong Lien <tuong.t.lien@dektech.com.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-19 10:17:57 +08:00
DEFINE_LINK_EVENT(tipc_link_conges);
DEFINE_LINK_EVENT(tipc_link_timeout);
DEFINE_LINK_EVENT(tipc_link_reset);
#define DEFINE_LINK_EVENT_COND(name, cond) \
DEFINE_EVENT_CONDITION(tipc_link_class, name, \
TP_PROTO(struct tipc_link *l, u16 dqueues, const char *header), \
TP_ARGS(l, dqueues, header), \
TP_CONDITION(cond))
DEFINE_LINK_EVENT_COND(tipc_link_too_silent, tipc_link_too_silent(l));
DECLARE_EVENT_CLASS(tipc_link_transmq_class,
TP_PROTO(struct tipc_link *r, u16 f, u16 t, struct sk_buff_head *tq),
TP_ARGS(r, f, t, tq),
TP_STRUCT__entry(
__array(char, name, TIPC_MAX_LINK_NAME)
__field(u16, from)
__field(u16, to)
__field(u32, len)
__field(u16, fseqno)
__field(u16, lseqno)
),
TP_fast_assign(
memcpy(__entry->name, tipc_link_name(r), TIPC_MAX_LINK_NAME);
tipc: add trace_events for tipc link The commit adds the new trace_events for TIPC link object: trace_tipc_link_timeout() trace_tipc_link_fsm() trace_tipc_link_reset() trace_tipc_link_too_silent() trace_tipc_link_retrans() trace_tipc_link_bc_ack() trace_tipc_link_conges() And the traces for PROTOCOL messages at building and receiving: trace_tipc_proto_build() trace_tipc_proto_rcv() Note: a) The 'tipc_link_too_silent' event will only happen when the 'silent_intv_cnt' is about to reach the 'abort_limit' value (and the event is enabled). The benefit for this kind of event is that we can get an early indication about TIPC link loss issue due to timeout, then can do some necessary actions for troubleshooting. For example: To trigger the 'tipc_proto_rcv' when the 'too_silent' event occurs: echo 'enable_event:tipc:tipc_proto_rcv' > \ events/tipc/tipc_link_too_silent/trigger And disable it when TIPC link is reset: echo 'disable_event:tipc:tipc_proto_rcv' > \ events/tipc/tipc_link_reset/trigger b) The 'tipc_link_retrans' or 'tipc_link_bc_ack' event is useful to trace TIPC retransmission issues. In addition, the commit adds the 'trace_tipc_list/link_dump()' at the 'retransmission failure' case. Then, if the issue occurs, the link 'transmq' along with the link data can be dumped for post-analysis. These dump events should be enabled by default since it will only take effect when the failure happens. The same approach is also applied for the faulty case that the validation of protocol message is failed. Acked-by: Ying Xue <ying.xue@windriver.com> Tested-by: Ying Xue <ying.xue@windriver.com> Acked-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: Tuong Lien <tuong.t.lien@dektech.com.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-19 10:17:57 +08:00
__entry->from = f;
__entry->to = t;
__entry->len = skb_queue_len(tq);
__entry->fseqno = __entry->len ?
msg_seqno(buf_msg(skb_peek(tq))) : 0;
__entry->lseqno = __entry->len ?
msg_seqno(buf_msg(skb_peek_tail(tq))) : 0;
tipc: add trace_events for tipc link The commit adds the new trace_events for TIPC link object: trace_tipc_link_timeout() trace_tipc_link_fsm() trace_tipc_link_reset() trace_tipc_link_too_silent() trace_tipc_link_retrans() trace_tipc_link_bc_ack() trace_tipc_link_conges() And the traces for PROTOCOL messages at building and receiving: trace_tipc_proto_build() trace_tipc_proto_rcv() Note: a) The 'tipc_link_too_silent' event will only happen when the 'silent_intv_cnt' is about to reach the 'abort_limit' value (and the event is enabled). The benefit for this kind of event is that we can get an early indication about TIPC link loss issue due to timeout, then can do some necessary actions for troubleshooting. For example: To trigger the 'tipc_proto_rcv' when the 'too_silent' event occurs: echo 'enable_event:tipc:tipc_proto_rcv' > \ events/tipc/tipc_link_too_silent/trigger And disable it when TIPC link is reset: echo 'disable_event:tipc:tipc_proto_rcv' > \ events/tipc/tipc_link_reset/trigger b) The 'tipc_link_retrans' or 'tipc_link_bc_ack' event is useful to trace TIPC retransmission issues. In addition, the commit adds the 'trace_tipc_list/link_dump()' at the 'retransmission failure' case. Then, if the issue occurs, the link 'transmq' along with the link data can be dumped for post-analysis. These dump events should be enabled by default since it will only take effect when the failure happens. The same approach is also applied for the faulty case that the validation of protocol message is failed. Acked-by: Ying Xue <ying.xue@windriver.com> Tested-by: Ying Xue <ying.xue@windriver.com> Acked-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: Tuong Lien <tuong.t.lien@dektech.com.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-19 10:17:57 +08:00
),
TP_printk("<%s> retrans req: [%u-%u] transmq: %u [%u-%u]\n",
__entry->name, __entry->from, __entry->to,
__entry->len, __entry->fseqno, __entry->lseqno)
);
DEFINE_EVENT_CONDITION(tipc_link_transmq_class, tipc_link_retrans,
tipc: add trace_events for tipc link The commit adds the new trace_events for TIPC link object: trace_tipc_link_timeout() trace_tipc_link_fsm() trace_tipc_link_reset() trace_tipc_link_too_silent() trace_tipc_link_retrans() trace_tipc_link_bc_ack() trace_tipc_link_conges() And the traces for PROTOCOL messages at building and receiving: trace_tipc_proto_build() trace_tipc_proto_rcv() Note: a) The 'tipc_link_too_silent' event will only happen when the 'silent_intv_cnt' is about to reach the 'abort_limit' value (and the event is enabled). The benefit for this kind of event is that we can get an early indication about TIPC link loss issue due to timeout, then can do some necessary actions for troubleshooting. For example: To trigger the 'tipc_proto_rcv' when the 'too_silent' event occurs: echo 'enable_event:tipc:tipc_proto_rcv' > \ events/tipc/tipc_link_too_silent/trigger And disable it when TIPC link is reset: echo 'disable_event:tipc:tipc_proto_rcv' > \ events/tipc/tipc_link_reset/trigger b) The 'tipc_link_retrans' or 'tipc_link_bc_ack' event is useful to trace TIPC retransmission issues. In addition, the commit adds the 'trace_tipc_list/link_dump()' at the 'retransmission failure' case. Then, if the issue occurs, the link 'transmq' along with the link data can be dumped for post-analysis. These dump events should be enabled by default since it will only take effect when the failure happens. The same approach is also applied for the faulty case that the validation of protocol message is failed. Acked-by: Ying Xue <ying.xue@windriver.com> Tested-by: Ying Xue <ying.xue@windriver.com> Acked-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: Tuong Lien <tuong.t.lien@dektech.com.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-19 10:17:57 +08:00
TP_PROTO(struct tipc_link *r, u16 f, u16 t, struct sk_buff_head *tq),
TP_ARGS(r, f, t, tq),
TP_CONDITION(less_eq(f, t))
tipc: add trace_events for tipc link The commit adds the new trace_events for TIPC link object: trace_tipc_link_timeout() trace_tipc_link_fsm() trace_tipc_link_reset() trace_tipc_link_too_silent() trace_tipc_link_retrans() trace_tipc_link_bc_ack() trace_tipc_link_conges() And the traces for PROTOCOL messages at building and receiving: trace_tipc_proto_build() trace_tipc_proto_rcv() Note: a) The 'tipc_link_too_silent' event will only happen when the 'silent_intv_cnt' is about to reach the 'abort_limit' value (and the event is enabled). The benefit for this kind of event is that we can get an early indication about TIPC link loss issue due to timeout, then can do some necessary actions for troubleshooting. For example: To trigger the 'tipc_proto_rcv' when the 'too_silent' event occurs: echo 'enable_event:tipc:tipc_proto_rcv' > \ events/tipc/tipc_link_too_silent/trigger And disable it when TIPC link is reset: echo 'disable_event:tipc:tipc_proto_rcv' > \ events/tipc/tipc_link_reset/trigger b) The 'tipc_link_retrans' or 'tipc_link_bc_ack' event is useful to trace TIPC retransmission issues. In addition, the commit adds the 'trace_tipc_list/link_dump()' at the 'retransmission failure' case. Then, if the issue occurs, the link 'transmq' along with the link data can be dumped for post-analysis. These dump events should be enabled by default since it will only take effect when the failure happens. The same approach is also applied for the faulty case that the validation of protocol message is failed. Acked-by: Ying Xue <ying.xue@windriver.com> Tested-by: Ying Xue <ying.xue@windriver.com> Acked-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: Tuong Lien <tuong.t.lien@dektech.com.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-19 10:17:57 +08:00
);
DEFINE_EVENT_PRINT(tipc_link_transmq_class, tipc_link_bc_ack,
TP_PROTO(struct tipc_link *r, u16 f, u16 t, struct sk_buff_head *tq),
TP_ARGS(r, f, t, tq),
TP_printk("<%s> acked: %u gap: %u transmq: %u [%u-%u]\n",
tipc: add trace_events for tipc link The commit adds the new trace_events for TIPC link object: trace_tipc_link_timeout() trace_tipc_link_fsm() trace_tipc_link_reset() trace_tipc_link_too_silent() trace_tipc_link_retrans() trace_tipc_link_bc_ack() trace_tipc_link_conges() And the traces for PROTOCOL messages at building and receiving: trace_tipc_proto_build() trace_tipc_proto_rcv() Note: a) The 'tipc_link_too_silent' event will only happen when the 'silent_intv_cnt' is about to reach the 'abort_limit' value (and the event is enabled). The benefit for this kind of event is that we can get an early indication about TIPC link loss issue due to timeout, then can do some necessary actions for troubleshooting. For example: To trigger the 'tipc_proto_rcv' when the 'too_silent' event occurs: echo 'enable_event:tipc:tipc_proto_rcv' > \ events/tipc/tipc_link_too_silent/trigger And disable it when TIPC link is reset: echo 'disable_event:tipc:tipc_proto_rcv' > \ events/tipc/tipc_link_reset/trigger b) The 'tipc_link_retrans' or 'tipc_link_bc_ack' event is useful to trace TIPC retransmission issues. In addition, the commit adds the 'trace_tipc_list/link_dump()' at the 'retransmission failure' case. Then, if the issue occurs, the link 'transmq' along with the link data can be dumped for post-analysis. These dump events should be enabled by default since it will only take effect when the failure happens. The same approach is also applied for the faulty case that the validation of protocol message is failed. Acked-by: Ying Xue <ying.xue@windriver.com> Tested-by: Ying Xue <ying.xue@windriver.com> Acked-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: Tuong Lien <tuong.t.lien@dektech.com.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-19 10:17:57 +08:00
__entry->name, __entry->from, __entry->to,
__entry->len, __entry->fseqno, __entry->lseqno)
);
tipc: enable tracepoints in tipc As for the sake of debugging/tracing, the commit enables tracepoints in TIPC along with some general trace_events as shown below. It also defines some 'tipc_*_dump()' functions that allow to dump TIPC object data whenever needed, that is, for general debug purposes, ie. not just for the trace_events. The following trace_events are now available: - trace_tipc_skb_dump(): allows to trace and dump TIPC msg & skb data, e.g. message type, user, droppable, skb truesize, cloned skb, etc. - trace_tipc_list_dump(): allows to trace and dump any TIPC buffers or queues, e.g. TIPC link transmq, socket receive queue, etc. - trace_tipc_sk_dump(): allows to trace and dump TIPC socket data, e.g. sk state, sk type, connection type, rmem_alloc, socket queues, etc. - trace_tipc_link_dump(): allows to trace and dump TIPC link data, e.g. link state, silent_intv_cnt, gap, bc_gap, link queues, etc. - trace_tipc_node_dump(): allows to trace and dump TIPC node data, e.g. node state, active links, capabilities, link entries, etc. How to use: Put the trace functions at any places where we want to dump TIPC data or events. Note: a) The dump functions will generate raw data only, that is, to offload the trace event's processing, it can require a tool or script to parse the data but this should be simple. b) The trace_tipc_*_dump() should be reserved for a failure cases only (e.g. the retransmission failure case) or where we do not expect to happen too often, then we can consider enabling these events by default since they will almost not take any effects under normal conditions, but once the rare condition or failure occurs, we get the dumped data fully for post-analysis. For other trace purposes, we can reuse these trace classes as template but different events. c) A trace_event is only effective when we enable it. To enable the TIPC trace_events, echo 1 to 'enable' files in the events/tipc/ directory in the 'debugfs' file system. Normally, they are located at: /sys/kernel/debug/tracing/events/tipc/ For example: To enable the tipc_link_dump event: echo 1 > /sys/kernel/debug/tracing/events/tipc/tipc_link_dump/enable To enable all the TIPC trace_events: echo 1 > /sys/kernel/debug/tracing/events/tipc/enable To collect the trace data: cat trace or cat trace_pipe > /trace.out & To disable all the TIPC trace_events: echo 0 > /sys/kernel/debug/tracing/events/tipc/enable To clear the trace buffer: echo > trace d) Like the other trace_events, the feature like 'filter' or 'trigger' is also usable for the tipc trace_events. For more details, have a look at: Documentation/trace/ftrace.txt MAINTAINERS | add two new files 'trace.h' & 'trace.c' in tipc Acked-by: Ying Xue <ying.xue@windriver.com> Tested-by: Ying Xue <ying.xue@windriver.com> Acked-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: Tuong Lien <tuong.t.lien@dektech.com.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-19 10:17:56 +08:00
DECLARE_EVENT_CLASS(tipc_node_class,
TP_PROTO(struct tipc_node *n, bool more, const char *header),
TP_ARGS(n, more, header),
TP_STRUCT__entry(
__string(header, header)
__field(u32, addr)
__dynamic_array(char, buf, (more) ? NODE_LMAX : NODE_LMIN)
),
TP_fast_assign(
__assign_str(header, header);
__entry->addr = tipc_node_get_addr(n);
tipc_node_dump(n, more, __get_str(buf));
),
TP_printk("<%x> %s\n%s", __entry->addr, __get_str(header),
__get_str(buf))
);
#define DEFINE_NODE_EVENT(name) \
DEFINE_EVENT(tipc_node_class, name, \
TP_PROTO(struct tipc_node *n, bool more, const char *header), \
TP_ARGS(n, more, header))
DEFINE_NODE_EVENT(tipc_node_dump);
DEFINE_NODE_EVENT(tipc_node_create);
DEFINE_NODE_EVENT(tipc_node_delete);
DEFINE_NODE_EVENT(tipc_node_lost_contact);
DEFINE_NODE_EVENT(tipc_node_timeout);
DEFINE_NODE_EVENT(tipc_node_link_up);
DEFINE_NODE_EVENT(tipc_node_link_down);
DEFINE_NODE_EVENT(tipc_node_reset_links);
DEFINE_NODE_EVENT(tipc_node_check_state);
tipc: enable tracepoints in tipc As for the sake of debugging/tracing, the commit enables tracepoints in TIPC along with some general trace_events as shown below. It also defines some 'tipc_*_dump()' functions that allow to dump TIPC object data whenever needed, that is, for general debug purposes, ie. not just for the trace_events. The following trace_events are now available: - trace_tipc_skb_dump(): allows to trace and dump TIPC msg & skb data, e.g. message type, user, droppable, skb truesize, cloned skb, etc. - trace_tipc_list_dump(): allows to trace and dump any TIPC buffers or queues, e.g. TIPC link transmq, socket receive queue, etc. - trace_tipc_sk_dump(): allows to trace and dump TIPC socket data, e.g. sk state, sk type, connection type, rmem_alloc, socket queues, etc. - trace_tipc_link_dump(): allows to trace and dump TIPC link data, e.g. link state, silent_intv_cnt, gap, bc_gap, link queues, etc. - trace_tipc_node_dump(): allows to trace and dump TIPC node data, e.g. node state, active links, capabilities, link entries, etc. How to use: Put the trace functions at any places where we want to dump TIPC data or events. Note: a) The dump functions will generate raw data only, that is, to offload the trace event's processing, it can require a tool or script to parse the data but this should be simple. b) The trace_tipc_*_dump() should be reserved for a failure cases only (e.g. the retransmission failure case) or where we do not expect to happen too often, then we can consider enabling these events by default since they will almost not take any effects under normal conditions, but once the rare condition or failure occurs, we get the dumped data fully for post-analysis. For other trace purposes, we can reuse these trace classes as template but different events. c) A trace_event is only effective when we enable it. To enable the TIPC trace_events, echo 1 to 'enable' files in the events/tipc/ directory in the 'debugfs' file system. Normally, they are located at: /sys/kernel/debug/tracing/events/tipc/ For example: To enable the tipc_link_dump event: echo 1 > /sys/kernel/debug/tracing/events/tipc/tipc_link_dump/enable To enable all the TIPC trace_events: echo 1 > /sys/kernel/debug/tracing/events/tipc/enable To collect the trace data: cat trace or cat trace_pipe > /trace.out & To disable all the TIPC trace_events: echo 0 > /sys/kernel/debug/tracing/events/tipc/enable To clear the trace buffer: echo > trace d) Like the other trace_events, the feature like 'filter' or 'trigger' is also usable for the tipc trace_events. For more details, have a look at: Documentation/trace/ftrace.txt MAINTAINERS | add two new files 'trace.h' & 'trace.c' in tipc Acked-by: Ying Xue <ying.xue@windriver.com> Tested-by: Ying Xue <ying.xue@windriver.com> Acked-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: Tuong Lien <tuong.t.lien@dektech.com.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-19 10:17:56 +08:00
tipc: add trace_events for tipc link The commit adds the new trace_events for TIPC link object: trace_tipc_link_timeout() trace_tipc_link_fsm() trace_tipc_link_reset() trace_tipc_link_too_silent() trace_tipc_link_retrans() trace_tipc_link_bc_ack() trace_tipc_link_conges() And the traces for PROTOCOL messages at building and receiving: trace_tipc_proto_build() trace_tipc_proto_rcv() Note: a) The 'tipc_link_too_silent' event will only happen when the 'silent_intv_cnt' is about to reach the 'abort_limit' value (and the event is enabled). The benefit for this kind of event is that we can get an early indication about TIPC link loss issue due to timeout, then can do some necessary actions for troubleshooting. For example: To trigger the 'tipc_proto_rcv' when the 'too_silent' event occurs: echo 'enable_event:tipc:tipc_proto_rcv' > \ events/tipc/tipc_link_too_silent/trigger And disable it when TIPC link is reset: echo 'disable_event:tipc:tipc_proto_rcv' > \ events/tipc/tipc_link_reset/trigger b) The 'tipc_link_retrans' or 'tipc_link_bc_ack' event is useful to trace TIPC retransmission issues. In addition, the commit adds the 'trace_tipc_list/link_dump()' at the 'retransmission failure' case. Then, if the issue occurs, the link 'transmq' along with the link data can be dumped for post-analysis. These dump events should be enabled by default since it will only take effect when the failure happens. The same approach is also applied for the faulty case that the validation of protocol message is failed. Acked-by: Ying Xue <ying.xue@windriver.com> Tested-by: Ying Xue <ying.xue@windriver.com> Acked-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: Tuong Lien <tuong.t.lien@dektech.com.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-19 10:17:57 +08:00
DECLARE_EVENT_CLASS(tipc_fsm_class,
TP_PROTO(const char *name, u32 os, u32 ns, int evt),
TP_ARGS(name, os, ns, evt),
TP_STRUCT__entry(
__string(name, name)
__field(u32, os)
__field(u32, ns)
__field(u32, evt)
),
TP_fast_assign(
__assign_str(name, name);
__entry->os = os;
__entry->ns = ns;
__entry->evt = evt;
),
TP_printk("<%s> %s--(%s)->%s\n", __get_str(name),
state_sym(__entry->os), evt_sym(__entry->evt),
state_sym(__entry->ns))
);
#define DEFINE_FSM_EVENT(fsm_name) \
DEFINE_EVENT(tipc_fsm_class, fsm_name, \
TP_PROTO(const char *name, u32 os, u32 ns, int evt), \
TP_ARGS(name, os, ns, evt))
DEFINE_FSM_EVENT(tipc_link_fsm);
DEFINE_FSM_EVENT(tipc_node_fsm);
tipc: add trace_events for tipc link The commit adds the new trace_events for TIPC link object: trace_tipc_link_timeout() trace_tipc_link_fsm() trace_tipc_link_reset() trace_tipc_link_too_silent() trace_tipc_link_retrans() trace_tipc_link_bc_ack() trace_tipc_link_conges() And the traces for PROTOCOL messages at building and receiving: trace_tipc_proto_build() trace_tipc_proto_rcv() Note: a) The 'tipc_link_too_silent' event will only happen when the 'silent_intv_cnt' is about to reach the 'abort_limit' value (and the event is enabled). The benefit for this kind of event is that we can get an early indication about TIPC link loss issue due to timeout, then can do some necessary actions for troubleshooting. For example: To trigger the 'tipc_proto_rcv' when the 'too_silent' event occurs: echo 'enable_event:tipc:tipc_proto_rcv' > \ events/tipc/tipc_link_too_silent/trigger And disable it when TIPC link is reset: echo 'disable_event:tipc:tipc_proto_rcv' > \ events/tipc/tipc_link_reset/trigger b) The 'tipc_link_retrans' or 'tipc_link_bc_ack' event is useful to trace TIPC retransmission issues. In addition, the commit adds the 'trace_tipc_list/link_dump()' at the 'retransmission failure' case. Then, if the issue occurs, the link 'transmq' along with the link data can be dumped for post-analysis. These dump events should be enabled by default since it will only take effect when the failure happens. The same approach is also applied for the faulty case that the validation of protocol message is failed. Acked-by: Ying Xue <ying.xue@windriver.com> Tested-by: Ying Xue <ying.xue@windriver.com> Acked-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: Tuong Lien <tuong.t.lien@dektech.com.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-19 10:17:57 +08:00
TRACE_EVENT(tipc_l2_device_event,
TP_PROTO(struct net_device *dev, struct tipc_bearer *b,
unsigned long evt),
TP_ARGS(dev, b, evt),
TP_STRUCT__entry(
__string(dev_name, dev->name)
__string(b_name, b->name)
__field(unsigned long, evt)
__field(u8, b_up)
__field(u8, carrier)
__field(u8, oper)
),
TP_fast_assign(
__assign_str(dev_name, dev->name);
__assign_str(b_name, b->name);
__entry->evt = evt;
__entry->b_up = test_bit(0, &b->up);
__entry->carrier = netif_carrier_ok(dev);
__entry->oper = netif_oper_up(dev);
),
TP_printk("%s on: <%s>/<%s> oper: %s carrier: %s bearer: %s\n",
dev_evt_sym(__entry->evt), __get_str(dev_name),
__get_str(b_name), (__entry->oper) ? "up" : "down",
(__entry->carrier) ? "ok" : "notok",
(__entry->b_up) ? "up" : "down")
);
tipc: enable tracepoints in tipc As for the sake of debugging/tracing, the commit enables tracepoints in TIPC along with some general trace_events as shown below. It also defines some 'tipc_*_dump()' functions that allow to dump TIPC object data whenever needed, that is, for general debug purposes, ie. not just for the trace_events. The following trace_events are now available: - trace_tipc_skb_dump(): allows to trace and dump TIPC msg & skb data, e.g. message type, user, droppable, skb truesize, cloned skb, etc. - trace_tipc_list_dump(): allows to trace and dump any TIPC buffers or queues, e.g. TIPC link transmq, socket receive queue, etc. - trace_tipc_sk_dump(): allows to trace and dump TIPC socket data, e.g. sk state, sk type, connection type, rmem_alloc, socket queues, etc. - trace_tipc_link_dump(): allows to trace and dump TIPC link data, e.g. link state, silent_intv_cnt, gap, bc_gap, link queues, etc. - trace_tipc_node_dump(): allows to trace and dump TIPC node data, e.g. node state, active links, capabilities, link entries, etc. How to use: Put the trace functions at any places where we want to dump TIPC data or events. Note: a) The dump functions will generate raw data only, that is, to offload the trace event's processing, it can require a tool or script to parse the data but this should be simple. b) The trace_tipc_*_dump() should be reserved for a failure cases only (e.g. the retransmission failure case) or where we do not expect to happen too often, then we can consider enabling these events by default since they will almost not take any effects under normal conditions, but once the rare condition or failure occurs, we get the dumped data fully for post-analysis. For other trace purposes, we can reuse these trace classes as template but different events. c) A trace_event is only effective when we enable it. To enable the TIPC trace_events, echo 1 to 'enable' files in the events/tipc/ directory in the 'debugfs' file system. Normally, they are located at: /sys/kernel/debug/tracing/events/tipc/ For example: To enable the tipc_link_dump event: echo 1 > /sys/kernel/debug/tracing/events/tipc/tipc_link_dump/enable To enable all the TIPC trace_events: echo 1 > /sys/kernel/debug/tracing/events/tipc/enable To collect the trace data: cat trace or cat trace_pipe > /trace.out & To disable all the TIPC trace_events: echo 0 > /sys/kernel/debug/tracing/events/tipc/enable To clear the trace buffer: echo > trace d) Like the other trace_events, the feature like 'filter' or 'trigger' is also usable for the tipc trace_events. For more details, have a look at: Documentation/trace/ftrace.txt MAINTAINERS | add two new files 'trace.h' & 'trace.c' in tipc Acked-by: Ying Xue <ying.xue@windriver.com> Tested-by: Ying Xue <ying.xue@windriver.com> Acked-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: Tuong Lien <tuong.t.lien@dektech.com.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-19 10:17:56 +08:00
#endif /* _TIPC_TRACE_H */
/* This part must be outside protection */
#undef TRACE_INCLUDE_PATH
#define TRACE_INCLUDE_PATH .
#undef TRACE_INCLUDE_FILE
#define TRACE_INCLUDE_FILE trace
#include <trace/define_trace.h>