OpenCloudOS-Kernel/mm/shmem.c

2644 lines
67 KiB
C
Raw Normal View History

/*
* Resizable virtual memory filesystem for Linux.
*
* Copyright (C) 2000 Linus Torvalds.
* 2000 Transmeta Corp.
* 2000-2001 Christoph Rohland
* 2000-2001 SAP AG
* 2002 Red Hat Inc.
* Copyright (C) 2002-2005 Hugh Dickins.
* Copyright (C) 2002-2005 VERITAS Software Corporation.
* Copyright (C) 2004 Andi Kleen, SuSE Labs
*
* Extended attribute support for tmpfs:
* Copyright (c) 2004, Luke Kenneth Casson Leighton <lkcl@lkcl.net>
* Copyright (c) 2004 Red Hat, Inc., James Morris <jmorris@redhat.com>
*
* This file is released under the GPL.
*/
/*
* This virtual memory filesystem is heavily based on the ramfs. It
* extends ramfs by the ability to use swap and honor resource limits
* which makes it a completely usable filesystem.
*/
#include <linux/module.h>
#include <linux/init.h>
#include <linux/fs.h>
#include <linux/xattr.h>
#include <linux/exportfs.h>
#include <linux/generic_acl.h>
#include <linux/mm.h>
#include <linux/mman.h>
#include <linux/file.h>
#include <linux/swap.h>
#include <linux/pagemap.h>
#include <linux/string.h>
#include <linux/slab.h>
#include <linux/backing-dev.h>
#include <linux/shmem_fs.h>
#include <linux/mount.h>
#include <linux/writeback.h>
#include <linux/vfs.h>
#include <linux/blkdev.h>
#include <linux/security.h>
#include <linux/swapops.h>
#include <linux/mempolicy.h>
#include <linux/namei.h>
#include <linux/ctype.h>
#include <linux/migrate.h>
#include <linux/highmem.h>
#include <linux/seq_file.h>
#include <asm/uaccess.h>
#include <asm/div64.h>
#include <asm/pgtable.h>
/* This magic number is used in glibc for posix shared memory */
#define TMPFS_MAGIC 0x01021994
#define ENTRIES_PER_PAGE (PAGE_CACHE_SIZE/sizeof(unsigned long))
#define ENTRIES_PER_PAGEPAGE (ENTRIES_PER_PAGE*ENTRIES_PER_PAGE)
#define BLOCKS_PER_PAGE (PAGE_CACHE_SIZE/512)
#define SHMEM_MAX_INDEX (SHMEM_NR_DIRECT + (ENTRIES_PER_PAGEPAGE/2) * (ENTRIES_PER_PAGE+1))
#define SHMEM_MAX_BYTES ((unsigned long long)SHMEM_MAX_INDEX << PAGE_CACHE_SHIFT)
#define VM_ACCT(size) (PAGE_CACHE_ALIGN(size) >> PAGE_SHIFT)
/* info->flags needs VM_flags to handle pagein/truncate races efficiently */
#define SHMEM_PAGEIN VM_READ
#define SHMEM_TRUNCATE VM_WRITE
/* Definition to limit shmem_truncate's steps between cond_rescheds */
#define LATENCY_LIMIT 64
/* Pretend that each entry is of this size in directory's i_size */
#define BOGO_DIRENT_SIZE 20
/* Flag allocation requirements to shmem_getpage and shmem_swp_alloc */
enum sgp_type {
SGP_READ, /* don't exceed i_size, don't allocate page */
SGP_CACHE, /* don't exceed i_size, may allocate page */
SGP_DIRTY, /* like SGP_CACHE, but set new page dirty */
SGP_WRITE, /* may exceed i_size, may allocate page */
};
#ifdef CONFIG_TMPFS
static unsigned long shmem_default_max_blocks(void)
{
return totalram_pages / 2;
}
static unsigned long shmem_default_max_inodes(void)
{
return min(totalram_pages - totalhigh_pages, totalram_pages / 2);
}
#endif
static int shmem_getpage(struct inode *inode, unsigned long idx,
struct page **pagep, enum sgp_type sgp, int *type);
static inline struct page *shmem_dir_alloc(gfp_t gfp_mask)
{
/*
* The above definition of ENTRIES_PER_PAGE, and the use of
* BLOCKS_PER_PAGE on indirect pages, assume PAGE_CACHE_SIZE:
* might be reconsidered if it ever diverges from PAGE_SIZE.
Add __GFP_MOVABLE for callers to flag allocations from high memory that may be migrated It is often known at allocation time whether a page may be migrated or not. This patch adds a flag called __GFP_MOVABLE and a new mask called GFP_HIGH_MOVABLE. Allocations using the __GFP_MOVABLE can be either migrated using the page migration mechanism or reclaimed by syncing with backing storage and discarding. An API function very similar to alloc_zeroed_user_highpage() is added for __GFP_MOVABLE allocations called alloc_zeroed_user_highpage_movable(). The flags used by alloc_zeroed_user_highpage() are not changed because it would change the semantics of an existing API. After this patch is applied there are no in-kernel users of alloc_zeroed_user_highpage() so it probably should be marked deprecated if this patch is merged. Note that this patch includes a minor cleanup to the use of __GFP_ZERO in shmem.c to keep all flag modifications to inode->mapping in the shmem_dir_alloc() helper function. This clean-up suggestion is courtesy of Hugh Dickens. Additional credit goes to Christoph Lameter and Linus Torvalds for shaping the concept. Credit to Hugh Dickens for catching issues with shmem swap vector and ramfs allocations. [akpm@linux-foundation.org: build fix] [hugh@veritas.com: __GFP_ZERO cleanup] Signed-off-by: Mel Gorman <mel@csn.ul.ie> Cc: Andy Whitcroft <apw@shadowen.org> Cc: Christoph Lameter <clameter@sgi.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-17 19:03:05 +08:00
*
* Mobility flags are masked out as swap vectors cannot move
*/
return alloc_pages((gfp_mask & ~GFP_MOVABLE_MASK) | __GFP_ZERO,
Add __GFP_MOVABLE for callers to flag allocations from high memory that may be migrated It is often known at allocation time whether a page may be migrated or not. This patch adds a flag called __GFP_MOVABLE and a new mask called GFP_HIGH_MOVABLE. Allocations using the __GFP_MOVABLE can be either migrated using the page migration mechanism or reclaimed by syncing with backing storage and discarding. An API function very similar to alloc_zeroed_user_highpage() is added for __GFP_MOVABLE allocations called alloc_zeroed_user_highpage_movable(). The flags used by alloc_zeroed_user_highpage() are not changed because it would change the semantics of an existing API. After this patch is applied there are no in-kernel users of alloc_zeroed_user_highpage() so it probably should be marked deprecated if this patch is merged. Note that this patch includes a minor cleanup to the use of __GFP_ZERO in shmem.c to keep all flag modifications to inode->mapping in the shmem_dir_alloc() helper function. This clean-up suggestion is courtesy of Hugh Dickens. Additional credit goes to Christoph Lameter and Linus Torvalds for shaping the concept. Credit to Hugh Dickens for catching issues with shmem swap vector and ramfs allocations. [akpm@linux-foundation.org: build fix] [hugh@veritas.com: __GFP_ZERO cleanup] Signed-off-by: Mel Gorman <mel@csn.ul.ie> Cc: Andy Whitcroft <apw@shadowen.org> Cc: Christoph Lameter <clameter@sgi.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-17 19:03:05 +08:00
PAGE_CACHE_SHIFT-PAGE_SHIFT);
}
static inline void shmem_dir_free(struct page *page)
{
__free_pages(page, PAGE_CACHE_SHIFT-PAGE_SHIFT);
}
static struct page **shmem_dir_map(struct page *page)
{
return (struct page **)kmap_atomic(page, KM_USER0);
}
static inline void shmem_dir_unmap(struct page **dir)
{
kunmap_atomic(dir, KM_USER0);
}
static swp_entry_t *shmem_swp_map(struct page *page)
{
return (swp_entry_t *)kmap_atomic(page, KM_USER1);
}
static inline void shmem_swp_balance_unmap(void)
{
/*
* When passing a pointer to an i_direct entry, to code which
* also handles indirect entries and so will shmem_swp_unmap,
* we must arrange for the preempt count to remain in balance.
* What kmap_atomic of a lowmem page does depends on config
* and architecture, so pretend to kmap_atomic some lowmem page.
*/
(void) kmap_atomic(ZERO_PAGE(0), KM_USER1);
}
static inline void shmem_swp_unmap(swp_entry_t *entry)
{
kunmap_atomic(entry, KM_USER1);
}
static inline struct shmem_sb_info *SHMEM_SB(struct super_block *sb)
{
return sb->s_fs_info;
}
/*
* shmem_file_setup pre-accounts the whole fixed size of a VM object,
* for shared memory and for shared anonymous (/dev/zero) mappings
* (unless MAP_NORESERVE and sysctl_overcommit_memory <= 1),
* consistent with the pre-accounting of private mappings ...
*/
static inline int shmem_acct_size(unsigned long flags, loff_t size)
{
return (flags & VM_ACCOUNT)?
security_vm_enough_memory(VM_ACCT(size)): 0;
}
static inline void shmem_unacct_size(unsigned long flags, loff_t size)
{
if (flags & VM_ACCOUNT)
vm_unacct_memory(VM_ACCT(size));
}
/*
* ... whereas tmpfs objects are accounted incrementally as
* pages are allocated, in order to allow huge sparse files.
* shmem_getpage reports shmem_acct_block failure as -ENOSPC not -ENOMEM,
* so that a failure on a sparse tmpfs mapping will give SIGBUS not OOM.
*/
static inline int shmem_acct_block(unsigned long flags)
{
return (flags & VM_ACCOUNT)?
0: security_vm_enough_memory(VM_ACCT(PAGE_CACHE_SIZE));
}
static inline void shmem_unacct_blocks(unsigned long flags, long pages)
{
if (!(flags & VM_ACCOUNT))
vm_unacct_memory(pages * VM_ACCT(PAGE_CACHE_SIZE));
}
static const struct super_operations shmem_ops;
static const struct address_space_operations shmem_aops;
static const struct file_operations shmem_file_operations;
static const struct inode_operations shmem_inode_operations;
static const struct inode_operations shmem_dir_inode_operations;
static const struct inode_operations shmem_special_inode_operations;
static struct vm_operations_struct shmem_vm_ops;
static struct backing_dev_info shmem_backing_dev_info __read_mostly = {
.ra_pages = 0, /* No readahead */
.capabilities = BDI_CAP_NO_ACCT_DIRTY | BDI_CAP_NO_WRITEBACK,
.unplug_io_fn = default_unplug_io_fn,
};
static LIST_HEAD(shmem_swaplist);
static DEFINE_MUTEX(shmem_swaplist_mutex);
static void shmem_free_blocks(struct inode *inode, long pages)
{
struct shmem_sb_info *sbinfo = SHMEM_SB(inode->i_sb);
if (sbinfo->max_blocks) {
spin_lock(&sbinfo->stat_lock);
sbinfo->free_blocks += pages;
inode->i_blocks -= pages*BLOCKS_PER_PAGE;
spin_unlock(&sbinfo->stat_lock);
}
}
static int shmem_reserve_inode(struct super_block *sb)
{
struct shmem_sb_info *sbinfo = SHMEM_SB(sb);
if (sbinfo->max_inodes) {
spin_lock(&sbinfo->stat_lock);
if (!sbinfo->free_inodes) {
spin_unlock(&sbinfo->stat_lock);
return -ENOSPC;
}
sbinfo->free_inodes--;
spin_unlock(&sbinfo->stat_lock);
}
return 0;
}
static void shmem_free_inode(struct super_block *sb)
{
struct shmem_sb_info *sbinfo = SHMEM_SB(sb);
if (sbinfo->max_inodes) {
spin_lock(&sbinfo->stat_lock);
sbinfo->free_inodes++;
spin_unlock(&sbinfo->stat_lock);
}
}
/*
* shmem_recalc_inode - recalculate the size of an inode
*
* @inode: inode to recalc
*
* We have to calculate the free blocks since the mm can drop
* undirtied hole pages behind our back.
*
* But normally info->alloced == inode->i_mapping->nrpages + info->swapped
* So mm freed is info->alloced - (inode->i_mapping->nrpages + info->swapped)
*
* It has to be called with the spinlock held.
*/
static void shmem_recalc_inode(struct inode *inode)
{
struct shmem_inode_info *info = SHMEM_I(inode);
long freed;
freed = info->alloced - info->swapped - inode->i_mapping->nrpages;
if (freed > 0) {
info->alloced -= freed;
shmem_unacct_blocks(info->flags, freed);
shmem_free_blocks(inode, freed);
}
}
/*
* shmem_swp_entry - find the swap vector position in the info structure
*
* @info: info structure for the inode
* @index: index of the page to find
* @page: optional page to add to the structure. Has to be preset to
* all zeros
*
* If there is no space allocated yet it will return NULL when
* page is NULL, else it will use the page for the needed block,
* setting it to NULL on return to indicate that it has been used.
*
* The swap vector is organized the following way:
*
* There are SHMEM_NR_DIRECT entries directly stored in the
* shmem_inode_info structure. So small files do not need an addional
* allocation.
*
* For pages with index > SHMEM_NR_DIRECT there is the pointer
* i_indirect which points to a page which holds in the first half
* doubly indirect blocks, in the second half triple indirect blocks:
*
* For an artificial ENTRIES_PER_PAGE = 4 this would lead to the
* following layout (for SHMEM_NR_DIRECT == 16):
*
* i_indirect -> dir --> 16-19
* | +-> 20-23
* |
* +-->dir2 --> 24-27
* | +-> 28-31
* | +-> 32-35
* | +-> 36-39
* |
* +-->dir3 --> 40-43
* +-> 44-47
* +-> 48-51
* +-> 52-55
*/
static swp_entry_t *shmem_swp_entry(struct shmem_inode_info *info, unsigned long index, struct page **page)
{
unsigned long offset;
struct page **dir;
struct page *subdir;
if (index < SHMEM_NR_DIRECT) {
shmem_swp_balance_unmap();
return info->i_direct+index;
}
if (!info->i_indirect) {
if (page) {
info->i_indirect = *page;
*page = NULL;
}
return NULL; /* need another page */
}
index -= SHMEM_NR_DIRECT;
offset = index % ENTRIES_PER_PAGE;
index /= ENTRIES_PER_PAGE;
dir = shmem_dir_map(info->i_indirect);
if (index >= ENTRIES_PER_PAGE/2) {
index -= ENTRIES_PER_PAGE/2;
dir += ENTRIES_PER_PAGE/2 + index/ENTRIES_PER_PAGE;
index %= ENTRIES_PER_PAGE;
subdir = *dir;
if (!subdir) {
if (page) {
*dir = *page;
*page = NULL;
}
shmem_dir_unmap(dir);
return NULL; /* need another page */
}
shmem_dir_unmap(dir);
dir = shmem_dir_map(subdir);
}
dir += index;
subdir = *dir;
if (!subdir) {
if (!page || !(subdir = *page)) {
shmem_dir_unmap(dir);
return NULL; /* need a page */
}
*dir = subdir;
*page = NULL;
}
shmem_dir_unmap(dir);
return shmem_swp_map(subdir) + offset;
}
static void shmem_swp_set(struct shmem_inode_info *info, swp_entry_t *entry, unsigned long value)
{
long incdec = value? 1: -1;
entry->val = value;
info->swapped += incdec;
[PATCH] mm: split page table lock Christoph Lameter demonstrated very poor scalability on the SGI 512-way, with a many-threaded application which concurrently initializes different parts of a large anonymous area. This patch corrects that, by using a separate spinlock per page table page, to guard the page table entries in that page, instead of using the mm's single page_table_lock. (But even then, page_table_lock is still used to guard page table allocation, and anon_vma allocation.) In this implementation, the spinlock is tucked inside the struct page of the page table page: with a BUILD_BUG_ON in case it overflows - which it would in the case of 32-bit PA-RISC with spinlock debugging enabled. Splitting the lock is not quite for free: another cacheline access. Ideally, I suppose we would use split ptlock only for multi-threaded processes on multi-cpu machines; but deciding that dynamically would have its own costs. So for now enable it by config, at some number of cpus - since the Kconfig language doesn't support inequalities, let preprocessor compare that with NR_CPUS. But I don't think it's worth being user-configurable: for good testing of both split and unsplit configs, split now at 4 cpus, and perhaps change that to 8 later. There is a benefit even for singly threaded processes: kswapd can be attacking one part of the mm while another part is busy faulting. Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-30 09:16:40 +08:00
if ((unsigned long)(entry - info->i_direct) >= SHMEM_NR_DIRECT) {
struct page *page = kmap_atomic_to_page(entry);
set_page_private(page, page_private(page) + incdec);
}
}
/*
* shmem_swp_alloc - get the position of the swap entry for the page.
* If it does not exist allocate the entry.
*
* @info: info structure for the inode
* @index: index of the page to find
* @sgp: check and recheck i_size? skip allocation?
*/
static swp_entry_t *shmem_swp_alloc(struct shmem_inode_info *info, unsigned long index, enum sgp_type sgp)
{
struct inode *inode = &info->vfs_inode;
struct shmem_sb_info *sbinfo = SHMEM_SB(inode->i_sb);
struct page *page = NULL;
swp_entry_t *entry;
if (sgp != SGP_WRITE &&
((loff_t) index << PAGE_CACHE_SHIFT) >= i_size_read(inode))
return ERR_PTR(-EINVAL);
while (!(entry = shmem_swp_entry(info, index, &page))) {
if (sgp == SGP_READ)
return shmem_swp_map(ZERO_PAGE(0));
/*
* Test free_blocks against 1 not 0, since we have 1 data
* page (and perhaps indirect index pages) yet to allocate:
* a waste to allocate index if we cannot allocate data.
*/
if (sbinfo->max_blocks) {
spin_lock(&sbinfo->stat_lock);
if (sbinfo->free_blocks <= 1) {
spin_unlock(&sbinfo->stat_lock);
return ERR_PTR(-ENOSPC);
}
sbinfo->free_blocks--;
inode->i_blocks += BLOCKS_PER_PAGE;
spin_unlock(&sbinfo->stat_lock);
}
spin_unlock(&info->lock);
Add __GFP_MOVABLE for callers to flag allocations from high memory that may be migrated It is often known at allocation time whether a page may be migrated or not. This patch adds a flag called __GFP_MOVABLE and a new mask called GFP_HIGH_MOVABLE. Allocations using the __GFP_MOVABLE can be either migrated using the page migration mechanism or reclaimed by syncing with backing storage and discarding. An API function very similar to alloc_zeroed_user_highpage() is added for __GFP_MOVABLE allocations called alloc_zeroed_user_highpage_movable(). The flags used by alloc_zeroed_user_highpage() are not changed because it would change the semantics of an existing API. After this patch is applied there are no in-kernel users of alloc_zeroed_user_highpage() so it probably should be marked deprecated if this patch is merged. Note that this patch includes a minor cleanup to the use of __GFP_ZERO in shmem.c to keep all flag modifications to inode->mapping in the shmem_dir_alloc() helper function. This clean-up suggestion is courtesy of Hugh Dickens. Additional credit goes to Christoph Lameter and Linus Torvalds for shaping the concept. Credit to Hugh Dickens for catching issues with shmem swap vector and ramfs allocations. [akpm@linux-foundation.org: build fix] [hugh@veritas.com: __GFP_ZERO cleanup] Signed-off-by: Mel Gorman <mel@csn.ul.ie> Cc: Andy Whitcroft <apw@shadowen.org> Cc: Christoph Lameter <clameter@sgi.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-17 19:03:05 +08:00
page = shmem_dir_alloc(mapping_gfp_mask(inode->i_mapping));
[PATCH] mm: split page table lock Christoph Lameter demonstrated very poor scalability on the SGI 512-way, with a many-threaded application which concurrently initializes different parts of a large anonymous area. This patch corrects that, by using a separate spinlock per page table page, to guard the page table entries in that page, instead of using the mm's single page_table_lock. (But even then, page_table_lock is still used to guard page table allocation, and anon_vma allocation.) In this implementation, the spinlock is tucked inside the struct page of the page table page: with a BUILD_BUG_ON in case it overflows - which it would in the case of 32-bit PA-RISC with spinlock debugging enabled. Splitting the lock is not quite for free: another cacheline access. Ideally, I suppose we would use split ptlock only for multi-threaded processes on multi-cpu machines; but deciding that dynamically would have its own costs. So for now enable it by config, at some number of cpus - since the Kconfig language doesn't support inequalities, let preprocessor compare that with NR_CPUS. But I don't think it's worth being user-configurable: for good testing of both split and unsplit configs, split now at 4 cpus, and perhaps change that to 8 later. There is a benefit even for singly threaded processes: kswapd can be attacking one part of the mm while another part is busy faulting. Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-30 09:16:40 +08:00
if (page)
set_page_private(page, 0);
spin_lock(&info->lock);
if (!page) {
shmem_free_blocks(inode, 1);
return ERR_PTR(-ENOMEM);
}
if (sgp != SGP_WRITE &&
((loff_t) index << PAGE_CACHE_SHIFT) >= i_size_read(inode)) {
entry = ERR_PTR(-EINVAL);
break;
}
if (info->next_index <= index)
info->next_index = index + 1;
}
if (page) {
/* another task gave its page, or truncated the file */
shmem_free_blocks(inode, 1);
shmem_dir_free(page);
}
if (info->next_index <= index && !IS_ERR(entry))
info->next_index = index + 1;
return entry;
}
/*
* shmem_free_swp - free some swap entries in a directory
*
* @dir: pointer to the directory
* @edir: pointer after last entry of the directory
* @punch_lock: pointer to spinlock when needed for the holepunch case
*/
static int shmem_free_swp(swp_entry_t *dir, swp_entry_t *edir,
spinlock_t *punch_lock)
{
spinlock_t *punch_unlock = NULL;
swp_entry_t *ptr;
int freed = 0;
for (ptr = dir; ptr < edir; ptr++) {
if (ptr->val) {
if (unlikely(punch_lock)) {
punch_unlock = punch_lock;
punch_lock = NULL;
spin_lock(punch_unlock);
if (!ptr->val)
continue;
}
free_swap_and_cache(*ptr);
*ptr = (swp_entry_t){0};
freed++;
}
}
if (punch_unlock)
spin_unlock(punch_unlock);
return freed;
}
static int shmem_map_and_free_swp(struct page *subdir, int offset,
int limit, struct page ***dir, spinlock_t *punch_lock)
{
swp_entry_t *ptr;
int freed = 0;
ptr = shmem_swp_map(subdir);
for (; offset < limit; offset += LATENCY_LIMIT) {
int size = limit - offset;
if (size > LATENCY_LIMIT)
size = LATENCY_LIMIT;
freed += shmem_free_swp(ptr+offset, ptr+offset+size,
punch_lock);
if (need_resched()) {
shmem_swp_unmap(ptr);
if (*dir) {
shmem_dir_unmap(*dir);
*dir = NULL;
}
cond_resched();
ptr = shmem_swp_map(subdir);
}
}
shmem_swp_unmap(ptr);
return freed;
}
static void shmem_free_pages(struct list_head *next)
{
struct page *page;
int freed = 0;
do {
page = container_of(next, struct page, lru);
next = next->next;
shmem_dir_free(page);
freed++;
if (freed >= LATENCY_LIMIT) {
cond_resched();
freed = 0;
}
} while (next);
}
[PATCH] madvise(MADV_REMOVE): remove pages from tmpfs shm backing store Here is the patch to implement madvise(MADV_REMOVE) - which frees up a given range of pages & its associated backing store. Current implementation supports only shmfs/tmpfs and other filesystems return -ENOSYS. "Some app allocates large tmpfs files, then when some task quits and some client disconnect, some memory can be released. However the only way to release tmpfs-swap is to MADV_REMOVE". - Andrea Arcangeli Databases want to use this feature to drop a section of their bufferpool (shared memory segments) - without writing back to disk/swap space. This feature is also useful for supporting hot-plug memory on UML. Concerns raised by Andrew Morton: - "We have no plan for holepunching! If we _do_ have such a plan (or might in the future) then what would the API look like? I think sys_holepunch(fd, start, len), so we should start out with that." - Using madvise is very weird, because people will ask "why do I need to mmap my file before I can stick a hole in it?" - None of the other madvise operations call into the filesystem in this manner. A broad question is: is this capability an MM operation or a filesytem operation? truncate, for example, is a filesystem operation which sometimes has MM side-effects. madvise is an mm operation and with this patch, it gains FS side-effects, only they're really, really significant ones." Comments: - Andrea suggested the fs operation too but then it's more efficient to have it as a mm operation with fs side effects, because they don't immediatly know fd and physical offset of the range. It's possible to fixup in userland and to use the fs operation but it's more expensive, the vmas are already in the kernel and we can use them. Short term plan & Future Direction: - We seem to need this interface only for shmfs/tmpfs files in the short term. We have to add hooks into the filesystem for correctness and completeness. This is what this patch does. - In the future, plan is to support both fs and mmap apis also. This also involves (other) filesystem specific functions to be implemented. - Current patch doesn't support VM_NONLINEAR - which can be addressed in the future. Signed-off-by: Badari Pulavarty <pbadari@us.ibm.com> Cc: Hugh Dickins <hugh@veritas.com> Cc: Andrea Arcangeli <andrea@suse.de> Cc: Michael Kerrisk <mtk-manpages@gmx.net> Cc: Ulrich Drepper <drepper@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-06 16:10:38 +08:00
static void shmem_truncate_range(struct inode *inode, loff_t start, loff_t end)
{
struct shmem_inode_info *info = SHMEM_I(inode);
unsigned long idx;
unsigned long size;
unsigned long limit;
unsigned long stage;
unsigned long diroff;
struct page **dir;
struct page *topdir;
struct page *middir;
struct page *subdir;
swp_entry_t *ptr;
LIST_HEAD(pages_to_free);
long nr_pages_to_free = 0;
long nr_swaps_freed = 0;
int offset;
int freed;
int punch_hole;
spinlock_t *needs_lock;
spinlock_t *punch_lock;
unsigned long upper_limit;
inode->i_ctime = inode->i_mtime = CURRENT_TIME;
[PATCH] madvise(MADV_REMOVE): remove pages from tmpfs shm backing store Here is the patch to implement madvise(MADV_REMOVE) - which frees up a given range of pages & its associated backing store. Current implementation supports only shmfs/tmpfs and other filesystems return -ENOSYS. "Some app allocates large tmpfs files, then when some task quits and some client disconnect, some memory can be released. However the only way to release tmpfs-swap is to MADV_REMOVE". - Andrea Arcangeli Databases want to use this feature to drop a section of their bufferpool (shared memory segments) - without writing back to disk/swap space. This feature is also useful for supporting hot-plug memory on UML. Concerns raised by Andrew Morton: - "We have no plan for holepunching! If we _do_ have such a plan (or might in the future) then what would the API look like? I think sys_holepunch(fd, start, len), so we should start out with that." - Using madvise is very weird, because people will ask "why do I need to mmap my file before I can stick a hole in it?" - None of the other madvise operations call into the filesystem in this manner. A broad question is: is this capability an MM operation or a filesytem operation? truncate, for example, is a filesystem operation which sometimes has MM side-effects. madvise is an mm operation and with this patch, it gains FS side-effects, only they're really, really significant ones." Comments: - Andrea suggested the fs operation too but then it's more efficient to have it as a mm operation with fs side effects, because they don't immediatly know fd and physical offset of the range. It's possible to fixup in userland and to use the fs operation but it's more expensive, the vmas are already in the kernel and we can use them. Short term plan & Future Direction: - We seem to need this interface only for shmfs/tmpfs files in the short term. We have to add hooks into the filesystem for correctness and completeness. This is what this patch does. - In the future, plan is to support both fs and mmap apis also. This also involves (other) filesystem specific functions to be implemented. - Current patch doesn't support VM_NONLINEAR - which can be addressed in the future. Signed-off-by: Badari Pulavarty <pbadari@us.ibm.com> Cc: Hugh Dickins <hugh@veritas.com> Cc: Andrea Arcangeli <andrea@suse.de> Cc: Michael Kerrisk <mtk-manpages@gmx.net> Cc: Ulrich Drepper <drepper@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-06 16:10:38 +08:00
idx = (start + PAGE_CACHE_SIZE - 1) >> PAGE_CACHE_SHIFT;
if (idx >= info->next_index)
return;
spin_lock(&info->lock);
info->flags |= SHMEM_TRUNCATE;
[PATCH] madvise(MADV_REMOVE): remove pages from tmpfs shm backing store Here is the patch to implement madvise(MADV_REMOVE) - which frees up a given range of pages & its associated backing store. Current implementation supports only shmfs/tmpfs and other filesystems return -ENOSYS. "Some app allocates large tmpfs files, then when some task quits and some client disconnect, some memory can be released. However the only way to release tmpfs-swap is to MADV_REMOVE". - Andrea Arcangeli Databases want to use this feature to drop a section of their bufferpool (shared memory segments) - without writing back to disk/swap space. This feature is also useful for supporting hot-plug memory on UML. Concerns raised by Andrew Morton: - "We have no plan for holepunching! If we _do_ have such a plan (or might in the future) then what would the API look like? I think sys_holepunch(fd, start, len), so we should start out with that." - Using madvise is very weird, because people will ask "why do I need to mmap my file before I can stick a hole in it?" - None of the other madvise operations call into the filesystem in this manner. A broad question is: is this capability an MM operation or a filesytem operation? truncate, for example, is a filesystem operation which sometimes has MM side-effects. madvise is an mm operation and with this patch, it gains FS side-effects, only they're really, really significant ones." Comments: - Andrea suggested the fs operation too but then it's more efficient to have it as a mm operation with fs side effects, because they don't immediatly know fd and physical offset of the range. It's possible to fixup in userland and to use the fs operation but it's more expensive, the vmas are already in the kernel and we can use them. Short term plan & Future Direction: - We seem to need this interface only for shmfs/tmpfs files in the short term. We have to add hooks into the filesystem for correctness and completeness. This is what this patch does. - In the future, plan is to support both fs and mmap apis also. This also involves (other) filesystem specific functions to be implemented. - Current patch doesn't support VM_NONLINEAR - which can be addressed in the future. Signed-off-by: Badari Pulavarty <pbadari@us.ibm.com> Cc: Hugh Dickins <hugh@veritas.com> Cc: Andrea Arcangeli <andrea@suse.de> Cc: Michael Kerrisk <mtk-manpages@gmx.net> Cc: Ulrich Drepper <drepper@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-06 16:10:38 +08:00
if (likely(end == (loff_t) -1)) {
limit = info->next_index;
upper_limit = SHMEM_MAX_INDEX;
[PATCH] madvise(MADV_REMOVE): remove pages from tmpfs shm backing store Here is the patch to implement madvise(MADV_REMOVE) - which frees up a given range of pages & its associated backing store. Current implementation supports only shmfs/tmpfs and other filesystems return -ENOSYS. "Some app allocates large tmpfs files, then when some task quits and some client disconnect, some memory can be released. However the only way to release tmpfs-swap is to MADV_REMOVE". - Andrea Arcangeli Databases want to use this feature to drop a section of their bufferpool (shared memory segments) - without writing back to disk/swap space. This feature is also useful for supporting hot-plug memory on UML. Concerns raised by Andrew Morton: - "We have no plan for holepunching! If we _do_ have such a plan (or might in the future) then what would the API look like? I think sys_holepunch(fd, start, len), so we should start out with that." - Using madvise is very weird, because people will ask "why do I need to mmap my file before I can stick a hole in it?" - None of the other madvise operations call into the filesystem in this manner. A broad question is: is this capability an MM operation or a filesytem operation? truncate, for example, is a filesystem operation which sometimes has MM side-effects. madvise is an mm operation and with this patch, it gains FS side-effects, only they're really, really significant ones." Comments: - Andrea suggested the fs operation too but then it's more efficient to have it as a mm operation with fs side effects, because they don't immediatly know fd and physical offset of the range. It's possible to fixup in userland and to use the fs operation but it's more expensive, the vmas are already in the kernel and we can use them. Short term plan & Future Direction: - We seem to need this interface only for shmfs/tmpfs files in the short term. We have to add hooks into the filesystem for correctness and completeness. This is what this patch does. - In the future, plan is to support both fs and mmap apis also. This also involves (other) filesystem specific functions to be implemented. - Current patch doesn't support VM_NONLINEAR - which can be addressed in the future. Signed-off-by: Badari Pulavarty <pbadari@us.ibm.com> Cc: Hugh Dickins <hugh@veritas.com> Cc: Andrea Arcangeli <andrea@suse.de> Cc: Michael Kerrisk <mtk-manpages@gmx.net> Cc: Ulrich Drepper <drepper@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-06 16:10:38 +08:00
info->next_index = idx;
needs_lock = NULL;
punch_hole = 0;
[PATCH] madvise(MADV_REMOVE): remove pages from tmpfs shm backing store Here is the patch to implement madvise(MADV_REMOVE) - which frees up a given range of pages & its associated backing store. Current implementation supports only shmfs/tmpfs and other filesystems return -ENOSYS. "Some app allocates large tmpfs files, then when some task quits and some client disconnect, some memory can be released. However the only way to release tmpfs-swap is to MADV_REMOVE". - Andrea Arcangeli Databases want to use this feature to drop a section of their bufferpool (shared memory segments) - without writing back to disk/swap space. This feature is also useful for supporting hot-plug memory on UML. Concerns raised by Andrew Morton: - "We have no plan for holepunching! If we _do_ have such a plan (or might in the future) then what would the API look like? I think sys_holepunch(fd, start, len), so we should start out with that." - Using madvise is very weird, because people will ask "why do I need to mmap my file before I can stick a hole in it?" - None of the other madvise operations call into the filesystem in this manner. A broad question is: is this capability an MM operation or a filesytem operation? truncate, for example, is a filesystem operation which sometimes has MM side-effects. madvise is an mm operation and with this patch, it gains FS side-effects, only they're really, really significant ones." Comments: - Andrea suggested the fs operation too but then it's more efficient to have it as a mm operation with fs side effects, because they don't immediatly know fd and physical offset of the range. It's possible to fixup in userland and to use the fs operation but it's more expensive, the vmas are already in the kernel and we can use them. Short term plan & Future Direction: - We seem to need this interface only for shmfs/tmpfs files in the short term. We have to add hooks into the filesystem for correctness and completeness. This is what this patch does. - In the future, plan is to support both fs and mmap apis also. This also involves (other) filesystem specific functions to be implemented. - Current patch doesn't support VM_NONLINEAR - which can be addressed in the future. Signed-off-by: Badari Pulavarty <pbadari@us.ibm.com> Cc: Hugh Dickins <hugh@veritas.com> Cc: Andrea Arcangeli <andrea@suse.de> Cc: Michael Kerrisk <mtk-manpages@gmx.net> Cc: Ulrich Drepper <drepper@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-06 16:10:38 +08:00
} else {
if (end + 1 >= inode->i_size) { /* we may free a little more */
limit = (inode->i_size + PAGE_CACHE_SIZE - 1) >>
PAGE_CACHE_SHIFT;
upper_limit = SHMEM_MAX_INDEX;
} else {
limit = (end + 1) >> PAGE_CACHE_SHIFT;
upper_limit = limit;
}
needs_lock = &info->lock;
[PATCH] madvise(MADV_REMOVE): remove pages from tmpfs shm backing store Here is the patch to implement madvise(MADV_REMOVE) - which frees up a given range of pages & its associated backing store. Current implementation supports only shmfs/tmpfs and other filesystems return -ENOSYS. "Some app allocates large tmpfs files, then when some task quits and some client disconnect, some memory can be released. However the only way to release tmpfs-swap is to MADV_REMOVE". - Andrea Arcangeli Databases want to use this feature to drop a section of their bufferpool (shared memory segments) - without writing back to disk/swap space. This feature is also useful for supporting hot-plug memory on UML. Concerns raised by Andrew Morton: - "We have no plan for holepunching! If we _do_ have such a plan (or might in the future) then what would the API look like? I think sys_holepunch(fd, start, len), so we should start out with that." - Using madvise is very weird, because people will ask "why do I need to mmap my file before I can stick a hole in it?" - None of the other madvise operations call into the filesystem in this manner. A broad question is: is this capability an MM operation or a filesytem operation? truncate, for example, is a filesystem operation which sometimes has MM side-effects. madvise is an mm operation and with this patch, it gains FS side-effects, only they're really, really significant ones." Comments: - Andrea suggested the fs operation too but then it's more efficient to have it as a mm operation with fs side effects, because they don't immediatly know fd and physical offset of the range. It's possible to fixup in userland and to use the fs operation but it's more expensive, the vmas are already in the kernel and we can use them. Short term plan & Future Direction: - We seem to need this interface only for shmfs/tmpfs files in the short term. We have to add hooks into the filesystem for correctness and completeness. This is what this patch does. - In the future, plan is to support both fs and mmap apis also. This also involves (other) filesystem specific functions to be implemented. - Current patch doesn't support VM_NONLINEAR - which can be addressed in the future. Signed-off-by: Badari Pulavarty <pbadari@us.ibm.com> Cc: Hugh Dickins <hugh@veritas.com> Cc: Andrea Arcangeli <andrea@suse.de> Cc: Michael Kerrisk <mtk-manpages@gmx.net> Cc: Ulrich Drepper <drepper@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-06 16:10:38 +08:00
punch_hole = 1;
}
topdir = info->i_indirect;
[PATCH] madvise(MADV_REMOVE): remove pages from tmpfs shm backing store Here is the patch to implement madvise(MADV_REMOVE) - which frees up a given range of pages & its associated backing store. Current implementation supports only shmfs/tmpfs and other filesystems return -ENOSYS. "Some app allocates large tmpfs files, then when some task quits and some client disconnect, some memory can be released. However the only way to release tmpfs-swap is to MADV_REMOVE". - Andrea Arcangeli Databases want to use this feature to drop a section of their bufferpool (shared memory segments) - without writing back to disk/swap space. This feature is also useful for supporting hot-plug memory on UML. Concerns raised by Andrew Morton: - "We have no plan for holepunching! If we _do_ have such a plan (or might in the future) then what would the API look like? I think sys_holepunch(fd, start, len), so we should start out with that." - Using madvise is very weird, because people will ask "why do I need to mmap my file before I can stick a hole in it?" - None of the other madvise operations call into the filesystem in this manner. A broad question is: is this capability an MM operation or a filesytem operation? truncate, for example, is a filesystem operation which sometimes has MM side-effects. madvise is an mm operation and with this patch, it gains FS side-effects, only they're really, really significant ones." Comments: - Andrea suggested the fs operation too but then it's more efficient to have it as a mm operation with fs side effects, because they don't immediatly know fd and physical offset of the range. It's possible to fixup in userland and to use the fs operation but it's more expensive, the vmas are already in the kernel and we can use them. Short term plan & Future Direction: - We seem to need this interface only for shmfs/tmpfs files in the short term. We have to add hooks into the filesystem for correctness and completeness. This is what this patch does. - In the future, plan is to support both fs and mmap apis also. This also involves (other) filesystem specific functions to be implemented. - Current patch doesn't support VM_NONLINEAR - which can be addressed in the future. Signed-off-by: Badari Pulavarty <pbadari@us.ibm.com> Cc: Hugh Dickins <hugh@veritas.com> Cc: Andrea Arcangeli <andrea@suse.de> Cc: Michael Kerrisk <mtk-manpages@gmx.net> Cc: Ulrich Drepper <drepper@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-06 16:10:38 +08:00
if (topdir && idx <= SHMEM_NR_DIRECT && !punch_hole) {
info->i_indirect = NULL;
nr_pages_to_free++;
list_add(&topdir->lru, &pages_to_free);
}
spin_unlock(&info->lock);
if (info->swapped && idx < SHMEM_NR_DIRECT) {
ptr = info->i_direct;
size = limit;
if (size > SHMEM_NR_DIRECT)
size = SHMEM_NR_DIRECT;
nr_swaps_freed = shmem_free_swp(ptr+idx, ptr+size, needs_lock);
}
/*
* If there are no indirect blocks or we are punching a hole
* below indirect blocks, nothing to be done.
*/
if (!topdir || limit <= SHMEM_NR_DIRECT)
goto done2;
/*
* The truncation case has already dropped info->lock, and we're safe
* because i_size and next_index have already been lowered, preventing
* access beyond. But in the punch_hole case, we still need to take
* the lock when updating the swap directory, because there might be
* racing accesses by shmem_getpage(SGP_CACHE), shmem_unuse_inode or
* shmem_writepage. However, whenever we find we can remove a whole
* directory page (not at the misaligned start or end of the range),
* we first NULLify its pointer in the level above, and then have no
* need to take the lock when updating its contents: needs_lock and
* punch_lock (either pointing to info->lock or NULL) manage this.
*/
upper_limit -= SHMEM_NR_DIRECT;
limit -= SHMEM_NR_DIRECT;
idx = (idx > SHMEM_NR_DIRECT)? (idx - SHMEM_NR_DIRECT): 0;
offset = idx % ENTRIES_PER_PAGE;
idx -= offset;
dir = shmem_dir_map(topdir);
stage = ENTRIES_PER_PAGEPAGE/2;
if (idx < ENTRIES_PER_PAGEPAGE/2) {
middir = topdir;
diroff = idx/ENTRIES_PER_PAGE;
} else {
dir += ENTRIES_PER_PAGE/2;
dir += (idx - ENTRIES_PER_PAGEPAGE/2)/ENTRIES_PER_PAGEPAGE;
while (stage <= idx)
stage += ENTRIES_PER_PAGEPAGE;
middir = *dir;
if (*dir) {
diroff = ((idx - ENTRIES_PER_PAGEPAGE/2) %
ENTRIES_PER_PAGEPAGE) / ENTRIES_PER_PAGE;
if (!diroff && !offset && upper_limit >= stage) {
if (needs_lock) {
spin_lock(needs_lock);
*dir = NULL;
spin_unlock(needs_lock);
needs_lock = NULL;
} else
*dir = NULL;
nr_pages_to_free++;
list_add(&middir->lru, &pages_to_free);
}
shmem_dir_unmap(dir);
dir = shmem_dir_map(middir);
} else {
diroff = 0;
offset = 0;
idx = stage;
}
}
for (; idx < limit; idx += ENTRIES_PER_PAGE, diroff++) {
if (unlikely(idx == stage)) {
shmem_dir_unmap(dir);
dir = shmem_dir_map(topdir) +
ENTRIES_PER_PAGE/2 + idx/ENTRIES_PER_PAGEPAGE;
while (!*dir) {
dir++;
idx += ENTRIES_PER_PAGEPAGE;
if (idx >= limit)
goto done1;
}
stage = idx + ENTRIES_PER_PAGEPAGE;
middir = *dir;
if (punch_hole)
needs_lock = &info->lock;
if (upper_limit >= stage) {
if (needs_lock) {
spin_lock(needs_lock);
*dir = NULL;
spin_unlock(needs_lock);
needs_lock = NULL;
} else
*dir = NULL;
nr_pages_to_free++;
list_add(&middir->lru, &pages_to_free);
}
shmem_dir_unmap(dir);
cond_resched();
dir = shmem_dir_map(middir);
diroff = 0;
}
punch_lock = needs_lock;
subdir = dir[diroff];
if (subdir && !offset && upper_limit-idx >= ENTRIES_PER_PAGE) {
if (needs_lock) {
spin_lock(needs_lock);
dir[diroff] = NULL;
spin_unlock(needs_lock);
punch_lock = NULL;
} else
dir[diroff] = NULL;
nr_pages_to_free++;
list_add(&subdir->lru, &pages_to_free);
}
if (subdir && page_private(subdir) /* has swap entries */) {
size = limit - idx;
if (size > ENTRIES_PER_PAGE)
size = ENTRIES_PER_PAGE;
freed = shmem_map_and_free_swp(subdir,
offset, size, &dir, punch_lock);
if (!dir)
dir = shmem_dir_map(middir);
nr_swaps_freed += freed;
if (offset || punch_lock) {
spin_lock(&info->lock);
set_page_private(subdir,
page_private(subdir) - freed);
spin_unlock(&info->lock);
} else
BUG_ON(page_private(subdir) != freed);
}
offset = 0;
}
done1:
shmem_dir_unmap(dir);
done2:
if (inode->i_mapping->nrpages && (info->flags & SHMEM_PAGEIN)) {
/*
* Call truncate_inode_pages again: racing shmem_unuse_inode
* may have swizzled a page in from swap since vmtruncate or
* generic_delete_inode did it, before we lowered next_index.
* Also, though shmem_getpage checks i_size before adding to
* cache, no recheck after: so fix the narrow window there too.
*
* Recalling truncate_inode_pages_range and unmap_mapping_range
* every time for punch_hole (which never got a chance to clear
* SHMEM_PAGEIN at the start of vmtruncate_range) is expensive,
* yet hardly ever necessary: try to optimize them out later.
*/
[PATCH] madvise(MADV_REMOVE): remove pages from tmpfs shm backing store Here is the patch to implement madvise(MADV_REMOVE) - which frees up a given range of pages & its associated backing store. Current implementation supports only shmfs/tmpfs and other filesystems return -ENOSYS. "Some app allocates large tmpfs files, then when some task quits and some client disconnect, some memory can be released. However the only way to release tmpfs-swap is to MADV_REMOVE". - Andrea Arcangeli Databases want to use this feature to drop a section of their bufferpool (shared memory segments) - without writing back to disk/swap space. This feature is also useful for supporting hot-plug memory on UML. Concerns raised by Andrew Morton: - "We have no plan for holepunching! If we _do_ have such a plan (or might in the future) then what would the API look like? I think sys_holepunch(fd, start, len), so we should start out with that." - Using madvise is very weird, because people will ask "why do I need to mmap my file before I can stick a hole in it?" - None of the other madvise operations call into the filesystem in this manner. A broad question is: is this capability an MM operation or a filesytem operation? truncate, for example, is a filesystem operation which sometimes has MM side-effects. madvise is an mm operation and with this patch, it gains FS side-effects, only they're really, really significant ones." Comments: - Andrea suggested the fs operation too but then it's more efficient to have it as a mm operation with fs side effects, because they don't immediatly know fd and physical offset of the range. It's possible to fixup in userland and to use the fs operation but it's more expensive, the vmas are already in the kernel and we can use them. Short term plan & Future Direction: - We seem to need this interface only for shmfs/tmpfs files in the short term. We have to add hooks into the filesystem for correctness and completeness. This is what this patch does. - In the future, plan is to support both fs and mmap apis also. This also involves (other) filesystem specific functions to be implemented. - Current patch doesn't support VM_NONLINEAR - which can be addressed in the future. Signed-off-by: Badari Pulavarty <pbadari@us.ibm.com> Cc: Hugh Dickins <hugh@veritas.com> Cc: Andrea Arcangeli <andrea@suse.de> Cc: Michael Kerrisk <mtk-manpages@gmx.net> Cc: Ulrich Drepper <drepper@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-06 16:10:38 +08:00
truncate_inode_pages_range(inode->i_mapping, start, end);
if (punch_hole)
unmap_mapping_range(inode->i_mapping, start,
end - start, 1);
}
spin_lock(&info->lock);
info->flags &= ~SHMEM_TRUNCATE;
info->swapped -= nr_swaps_freed;
if (nr_pages_to_free)
shmem_free_blocks(inode, nr_pages_to_free);
shmem_recalc_inode(inode);
spin_unlock(&info->lock);
/*
* Empty swap vector directory pages to be freed?
*/
if (!list_empty(&pages_to_free)) {
pages_to_free.prev->next = NULL;
shmem_free_pages(pages_to_free.next);
}
}
[PATCH] madvise(MADV_REMOVE): remove pages from tmpfs shm backing store Here is the patch to implement madvise(MADV_REMOVE) - which frees up a given range of pages & its associated backing store. Current implementation supports only shmfs/tmpfs and other filesystems return -ENOSYS. "Some app allocates large tmpfs files, then when some task quits and some client disconnect, some memory can be released. However the only way to release tmpfs-swap is to MADV_REMOVE". - Andrea Arcangeli Databases want to use this feature to drop a section of their bufferpool (shared memory segments) - without writing back to disk/swap space. This feature is also useful for supporting hot-plug memory on UML. Concerns raised by Andrew Morton: - "We have no plan for holepunching! If we _do_ have such a plan (or might in the future) then what would the API look like? I think sys_holepunch(fd, start, len), so we should start out with that." - Using madvise is very weird, because people will ask "why do I need to mmap my file before I can stick a hole in it?" - None of the other madvise operations call into the filesystem in this manner. A broad question is: is this capability an MM operation or a filesytem operation? truncate, for example, is a filesystem operation which sometimes has MM side-effects. madvise is an mm operation and with this patch, it gains FS side-effects, only they're really, really significant ones." Comments: - Andrea suggested the fs operation too but then it's more efficient to have it as a mm operation with fs side effects, because they don't immediatly know fd and physical offset of the range. It's possible to fixup in userland and to use the fs operation but it's more expensive, the vmas are already in the kernel and we can use them. Short term plan & Future Direction: - We seem to need this interface only for shmfs/tmpfs files in the short term. We have to add hooks into the filesystem for correctness and completeness. This is what this patch does. - In the future, plan is to support both fs and mmap apis also. This also involves (other) filesystem specific functions to be implemented. - Current patch doesn't support VM_NONLINEAR - which can be addressed in the future. Signed-off-by: Badari Pulavarty <pbadari@us.ibm.com> Cc: Hugh Dickins <hugh@veritas.com> Cc: Andrea Arcangeli <andrea@suse.de> Cc: Michael Kerrisk <mtk-manpages@gmx.net> Cc: Ulrich Drepper <drepper@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-06 16:10:38 +08:00
static void shmem_truncate(struct inode *inode)
{
shmem_truncate_range(inode, inode->i_size, (loff_t)-1);
}
static int shmem_notify_change(struct dentry *dentry, struct iattr *attr)
{
struct inode *inode = dentry->d_inode;
struct page *page = NULL;
int error;
if (S_ISREG(inode->i_mode) && (attr->ia_valid & ATTR_SIZE)) {
if (attr->ia_size < inode->i_size) {
/*
* If truncating down to a partial page, then
* if that page is already allocated, hold it
* in memory until the truncation is over, so
* truncate_partial_page cannnot miss it were
* it assigned to swap.
*/
if (attr->ia_size & (PAGE_CACHE_SIZE-1)) {
(void) shmem_getpage(inode,
attr->ia_size>>PAGE_CACHE_SHIFT,
&page, SGP_READ, NULL);
if (page)
unlock_page(page);
}
/*
* Reset SHMEM_PAGEIN flag so that shmem_truncate can
* detect if any pages might have been added to cache
* after truncate_inode_pages. But we needn't bother
* if it's being fully truncated to zero-length: the
* nrpages check is efficient enough in that case.
*/
if (attr->ia_size) {
struct shmem_inode_info *info = SHMEM_I(inode);
spin_lock(&info->lock);
info->flags &= ~SHMEM_PAGEIN;
spin_unlock(&info->lock);
}
}
}
error = inode_change_ok(inode, attr);
if (!error)
error = inode_setattr(inode, attr);
#ifdef CONFIG_TMPFS_POSIX_ACL
if (!error && (attr->ia_valid & ATTR_MODE))
error = generic_acl_chmod(inode, &shmem_acl_ops);
#endif
if (page)
page_cache_release(page);
return error;
}
static void shmem_delete_inode(struct inode *inode)
{
struct shmem_inode_info *info = SHMEM_I(inode);
if (inode->i_op->truncate == shmem_truncate) {
truncate_inode_pages(inode->i_mapping, 0);
shmem_unacct_size(info->flags, inode->i_size);
inode->i_size = 0;
shmem_truncate(inode);
if (!list_empty(&info->swaplist)) {
mutex_lock(&shmem_swaplist_mutex);
list_del_init(&info->swaplist);
mutex_unlock(&shmem_swaplist_mutex);
}
}
BUG_ON(inode->i_blocks);
shmem_free_inode(inode->i_sb);
clear_inode(inode);
}
static inline int shmem_find_swp(swp_entry_t entry, swp_entry_t *dir, swp_entry_t *edir)
{
swp_entry_t *ptr;
for (ptr = dir; ptr < edir; ptr++) {
if (ptr->val == entry.val)
return ptr - dir;
}
return -1;
}
static int shmem_unuse_inode(struct shmem_inode_info *info, swp_entry_t entry, struct page *page)
{
struct inode *inode;
unsigned long idx;
unsigned long size;
unsigned long limit;
unsigned long stage;
struct page **dir;
struct page *subdir;
swp_entry_t *ptr;
int offset;
int error;
idx = 0;
ptr = info->i_direct;
spin_lock(&info->lock);
tmpfs: fix shmem_swaplist races Intensive swapoff testing shows shmem_unuse spinning on an entry in shmem_swaplist pointing to itself: how does that come about? Days pass... First guess is this: shmem_delete_inode tests list_empty without taking the global mutex (so the swapping case doesn't slow down the common case); but there's an instant in shmem_unuse_inode's list_move_tail when the list entry may appear empty (a rare case, because it's actually moving the head not the the list member). So there's a danger of leaving the inode on the swaplist when it's freed, then reinitialized to point to itself when reused. Fix that by skipping the list_move_tail when it's a no-op, which happens to plug this. But this same spinning then surfaces on another machine. Ah, I'd never suspected it, but shmem_writepage's swaplist manipulation is unsafe: though we still hold page lock, which would hold off inode deletion if the page were in pagecache, it doesn't hold off once it's in swapcache (free_swap_and_cache doesn't wait on locked pages). Hmm: we could put the the inode on swaplist earlier, but then shmem_unuse_inode could never prune unswapped inodes. Fix this with an igrab before dropping info->lock, as in shmem_unuse_inode; though I am a little uneasy about the iput which has to follow - it works, and I see nothing wrong with it, but it is surprising that shmem inode deletion may now occur below shmem_writepage. Revisit this fix later? And while we're looking at these races: the way shmem_unuse tests swapped without holding info->lock looks unsafe, if we've more than one swap area: a racing shmem_writepage on another page of the same inode could be putting it in swapcache, just as we're deciding to remove the inode from swaplist - there's a danger of going on swap without being listed, so a later swapoff would hang, being unable to locate the entry. Move that test and removal down into shmem_unuse_inode, once info->lock is held. Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-05 14:28:55 +08:00
if (!info->swapped) {
list_del_init(&info->swaplist);
goto lost2;
}
limit = info->next_index;
size = limit;
if (size > SHMEM_NR_DIRECT)
size = SHMEM_NR_DIRECT;
offset = shmem_find_swp(entry, ptr, ptr+size);
if (offset >= 0)
goto found;
if (!info->i_indirect)
goto lost2;
dir = shmem_dir_map(info->i_indirect);
stage = SHMEM_NR_DIRECT + ENTRIES_PER_PAGEPAGE/2;
for (idx = SHMEM_NR_DIRECT; idx < limit; idx += ENTRIES_PER_PAGE, dir++) {
if (unlikely(idx == stage)) {
shmem_dir_unmap(dir-1);
if (cond_resched_lock(&info->lock)) {
/* check it has not been truncated */
if (limit > info->next_index) {
limit = info->next_index;
if (idx >= limit)
goto lost2;
}
}
dir = shmem_dir_map(info->i_indirect) +
ENTRIES_PER_PAGE/2 + idx/ENTRIES_PER_PAGEPAGE;
while (!*dir) {
dir++;
idx += ENTRIES_PER_PAGEPAGE;
if (idx >= limit)
goto lost1;
}
stage = idx + ENTRIES_PER_PAGEPAGE;
subdir = *dir;
shmem_dir_unmap(dir);
dir = shmem_dir_map(subdir);
}
subdir = *dir;
[PATCH] mm: split page table lock Christoph Lameter demonstrated very poor scalability on the SGI 512-way, with a many-threaded application which concurrently initializes different parts of a large anonymous area. This patch corrects that, by using a separate spinlock per page table page, to guard the page table entries in that page, instead of using the mm's single page_table_lock. (But even then, page_table_lock is still used to guard page table allocation, and anon_vma allocation.) In this implementation, the spinlock is tucked inside the struct page of the page table page: with a BUILD_BUG_ON in case it overflows - which it would in the case of 32-bit PA-RISC with spinlock debugging enabled. Splitting the lock is not quite for free: another cacheline access. Ideally, I suppose we would use split ptlock only for multi-threaded processes on multi-cpu machines; but deciding that dynamically would have its own costs. So for now enable it by config, at some number of cpus - since the Kconfig language doesn't support inequalities, let preprocessor compare that with NR_CPUS. But I don't think it's worth being user-configurable: for good testing of both split and unsplit configs, split now at 4 cpus, and perhaps change that to 8 later. There is a benefit even for singly threaded processes: kswapd can be attacking one part of the mm while another part is busy faulting. Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-30 09:16:40 +08:00
if (subdir && page_private(subdir)) {
ptr = shmem_swp_map(subdir);
size = limit - idx;
if (size > ENTRIES_PER_PAGE)
size = ENTRIES_PER_PAGE;
offset = shmem_find_swp(entry, ptr, ptr+size);
shmem_swp_unmap(ptr);
if (offset >= 0) {
shmem_dir_unmap(dir);
goto found;
}
}
}
lost1:
shmem_dir_unmap(dir-1);
lost2:
spin_unlock(&info->lock);
return 0;
found:
idx += offset;
inode = igrab(&info->vfs_inode);
spin_unlock(&info->lock);
tmpfs: fix shmem_swaplist races Intensive swapoff testing shows shmem_unuse spinning on an entry in shmem_swaplist pointing to itself: how does that come about? Days pass... First guess is this: shmem_delete_inode tests list_empty without taking the global mutex (so the swapping case doesn't slow down the common case); but there's an instant in shmem_unuse_inode's list_move_tail when the list entry may appear empty (a rare case, because it's actually moving the head not the the list member). So there's a danger of leaving the inode on the swaplist when it's freed, then reinitialized to point to itself when reused. Fix that by skipping the list_move_tail when it's a no-op, which happens to plug this. But this same spinning then surfaces on another machine. Ah, I'd never suspected it, but shmem_writepage's swaplist manipulation is unsafe: though we still hold page lock, which would hold off inode deletion if the page were in pagecache, it doesn't hold off once it's in swapcache (free_swap_and_cache doesn't wait on locked pages). Hmm: we could put the the inode on swaplist earlier, but then shmem_unuse_inode could never prune unswapped inodes. Fix this with an igrab before dropping info->lock, as in shmem_unuse_inode; though I am a little uneasy about the iput which has to follow - it works, and I see nothing wrong with it, but it is surprising that shmem inode deletion may now occur below shmem_writepage. Revisit this fix later? And while we're looking at these races: the way shmem_unuse tests swapped without holding info->lock looks unsafe, if we've more than one swap area: a racing shmem_writepage on another page of the same inode could be putting it in swapcache, just as we're deciding to remove the inode from swaplist - there's a danger of going on swap without being listed, so a later swapoff would hang, being unable to locate the entry. Move that test and removal down into shmem_unuse_inode, once info->lock is held. Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-05 14:28:55 +08:00
/*
* Move _head_ to start search for next from here.
* But be careful: shmem_delete_inode checks list_empty without taking
* mutex, and there's an instant in list_move_tail when info->swaplist
* would appear empty, if it were the only one on shmem_swaplist. We
* could avoid doing it if inode NULL; or use this minor optimization.
*/
if (shmem_swaplist.next != &info->swaplist)
list_move_tail(&shmem_swaplist, &info->swaplist);
mutex_unlock(&shmem_swaplist_mutex);
error = 1;
if (!inode)
goto out;
/* Precharge page while we can wait, compensate afterwards */
error = mem_cgroup_cache_charge(page, current->mm, GFP_KERNEL);
if (error)
goto out;
error = radix_tree_preload(GFP_KERNEL);
if (error)
goto uncharge;
error = 1;
spin_lock(&info->lock);
ptr = shmem_swp_entry(info, idx, NULL);
if (ptr && ptr->val == entry.val)
error = add_to_page_cache(page, inode->i_mapping,
idx, GFP_NOWAIT);
if (error == -EEXIST) {
struct page *filepage = find_get_page(inode->i_mapping, idx);
error = 1;
if (filepage) {
/*
* There might be a more uptodate page coming down
* from a stacked writepage: forget our swappage if so.
*/
if (PageUptodate(filepage))
error = 0;
page_cache_release(filepage);
}
}
if (!error) {
delete_from_swap_cache(page);
set_page_dirty(page);
info->flags |= SHMEM_PAGEIN;
shmem_swp_set(info, ptr, 0);
swap_free(entry);
error = 1; /* not an error, but entry was found */
}
if (ptr)
shmem_swp_unmap(ptr);
spin_unlock(&info->lock);
radix_tree_preload_end();
uncharge:
mem_cgroup_uncharge_page(page);
out:
unlock_page(page);
page_cache_release(page);
iput(inode); /* allows for NULL */
return error;
}
/*
* shmem_unuse() search for an eventually swapped out shmem page.
*/
int shmem_unuse(swp_entry_t entry, struct page *page)
{
struct list_head *p, *next;
struct shmem_inode_info *info;
int found = 0;
mutex_lock(&shmem_swaplist_mutex);
list_for_each_safe(p, next, &shmem_swaplist) {
info = list_entry(p, struct shmem_inode_info, swaplist);
tmpfs: fix shmem_swaplist races Intensive swapoff testing shows shmem_unuse spinning on an entry in shmem_swaplist pointing to itself: how does that come about? Days pass... First guess is this: shmem_delete_inode tests list_empty without taking the global mutex (so the swapping case doesn't slow down the common case); but there's an instant in shmem_unuse_inode's list_move_tail when the list entry may appear empty (a rare case, because it's actually moving the head not the the list member). So there's a danger of leaving the inode on the swaplist when it's freed, then reinitialized to point to itself when reused. Fix that by skipping the list_move_tail when it's a no-op, which happens to plug this. But this same spinning then surfaces on another machine. Ah, I'd never suspected it, but shmem_writepage's swaplist manipulation is unsafe: though we still hold page lock, which would hold off inode deletion if the page were in pagecache, it doesn't hold off once it's in swapcache (free_swap_and_cache doesn't wait on locked pages). Hmm: we could put the the inode on swaplist earlier, but then shmem_unuse_inode could never prune unswapped inodes. Fix this with an igrab before dropping info->lock, as in shmem_unuse_inode; though I am a little uneasy about the iput which has to follow - it works, and I see nothing wrong with it, but it is surprising that shmem inode deletion may now occur below shmem_writepage. Revisit this fix later? And while we're looking at these races: the way shmem_unuse tests swapped without holding info->lock looks unsafe, if we've more than one swap area: a racing shmem_writepage on another page of the same inode could be putting it in swapcache, just as we're deciding to remove the inode from swaplist - there's a danger of going on swap without being listed, so a later swapoff would hang, being unable to locate the entry. Move that test and removal down into shmem_unuse_inode, once info->lock is held. Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-05 14:28:55 +08:00
found = shmem_unuse_inode(info, entry, page);
cond_resched();
if (found)
goto out;
}
mutex_unlock(&shmem_swaplist_mutex);
out: return found; /* 0 or 1 or -ENOMEM */
}
/*
* Move the page from the page cache to the swap cache.
*/
static int shmem_writepage(struct page *page, struct writeback_control *wbc)
{
struct shmem_inode_info *info;
swp_entry_t *entry, swap;
struct address_space *mapping;
unsigned long index;
struct inode *inode;
BUG_ON(!PageLocked(page));
mapping = page->mapping;
index = page->index;
inode = mapping->host;
info = SHMEM_I(inode);
if (info->flags & VM_LOCKED)
goto redirty;
if (!total_swap_pages)
goto redirty;
/*
* shmem_backing_dev_info's capabilities prevent regular writeback or
* sync from ever calling shmem_writepage; but a stacking filesystem
* may use the ->writepage of its underlying filesystem, in which case
* tmpfs should write out to swap only in response to memory pressure,
* and not for pdflush or sync. However, in those cases, we do still
* want to check if there's a redundant swappage to be discarded.
*/
if (wbc->for_reclaim)
swap = get_swap_page();
else
swap.val = 0;
spin_lock(&info->lock);
if (index >= info->next_index) {
BUG_ON(!(info->flags & SHMEM_TRUNCATE));
goto unlock;
}
entry = shmem_swp_entry(info, index, NULL);
if (entry->val) {
/*
* The more uptodate page coming down from a stacked
* writepage should replace our old swappage.
*/
free_swap_and_cache(*entry);
shmem_swp_set(info, entry, 0);
}
shmem_recalc_inode(inode);
if (swap.val && add_to_swap_cache(page, swap, GFP_ATOMIC) == 0) {
remove_from_page_cache(page);
shmem_swp_set(info, entry, swap.val);
shmem_swp_unmap(entry);
tmpfs: fix shmem_swaplist races Intensive swapoff testing shows shmem_unuse spinning on an entry in shmem_swaplist pointing to itself: how does that come about? Days pass... First guess is this: shmem_delete_inode tests list_empty without taking the global mutex (so the swapping case doesn't slow down the common case); but there's an instant in shmem_unuse_inode's list_move_tail when the list entry may appear empty (a rare case, because it's actually moving the head not the the list member). So there's a danger of leaving the inode on the swaplist when it's freed, then reinitialized to point to itself when reused. Fix that by skipping the list_move_tail when it's a no-op, which happens to plug this. But this same spinning then surfaces on another machine. Ah, I'd never suspected it, but shmem_writepage's swaplist manipulation is unsafe: though we still hold page lock, which would hold off inode deletion if the page were in pagecache, it doesn't hold off once it's in swapcache (free_swap_and_cache doesn't wait on locked pages). Hmm: we could put the the inode on swaplist earlier, but then shmem_unuse_inode could never prune unswapped inodes. Fix this with an igrab before dropping info->lock, as in shmem_unuse_inode; though I am a little uneasy about the iput which has to follow - it works, and I see nothing wrong with it, but it is surprising that shmem inode deletion may now occur below shmem_writepage. Revisit this fix later? And while we're looking at these races: the way shmem_unuse tests swapped without holding info->lock looks unsafe, if we've more than one swap area: a racing shmem_writepage on another page of the same inode could be putting it in swapcache, just as we're deciding to remove the inode from swaplist - there's a danger of going on swap without being listed, so a later swapoff would hang, being unable to locate the entry. Move that test and removal down into shmem_unuse_inode, once info->lock is held. Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-05 14:28:55 +08:00
if (list_empty(&info->swaplist))
inode = igrab(inode);
else
inode = NULL;
spin_unlock(&info->lock);
swap_duplicate(swap);
BUG_ON(page_mapped(page));
page_cache_release(page); /* pagecache ref */
set_page_dirty(page);
unlock_page(page);
tmpfs: fix shmem_swaplist races Intensive swapoff testing shows shmem_unuse spinning on an entry in shmem_swaplist pointing to itself: how does that come about? Days pass... First guess is this: shmem_delete_inode tests list_empty without taking the global mutex (so the swapping case doesn't slow down the common case); but there's an instant in shmem_unuse_inode's list_move_tail when the list entry may appear empty (a rare case, because it's actually moving the head not the the list member). So there's a danger of leaving the inode on the swaplist when it's freed, then reinitialized to point to itself when reused. Fix that by skipping the list_move_tail when it's a no-op, which happens to plug this. But this same spinning then surfaces on another machine. Ah, I'd never suspected it, but shmem_writepage's swaplist manipulation is unsafe: though we still hold page lock, which would hold off inode deletion if the page were in pagecache, it doesn't hold off once it's in swapcache (free_swap_and_cache doesn't wait on locked pages). Hmm: we could put the the inode on swaplist earlier, but then shmem_unuse_inode could never prune unswapped inodes. Fix this with an igrab before dropping info->lock, as in shmem_unuse_inode; though I am a little uneasy about the iput which has to follow - it works, and I see nothing wrong with it, but it is surprising that shmem inode deletion may now occur below shmem_writepage. Revisit this fix later? And while we're looking at these races: the way shmem_unuse tests swapped without holding info->lock looks unsafe, if we've more than one swap area: a racing shmem_writepage on another page of the same inode could be putting it in swapcache, just as we're deciding to remove the inode from swaplist - there's a danger of going on swap without being listed, so a later swapoff would hang, being unable to locate the entry. Move that test and removal down into shmem_unuse_inode, once info->lock is held. Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-05 14:28:55 +08:00
if (inode) {
mutex_lock(&shmem_swaplist_mutex);
/* move instead of add in case we're racing */
list_move_tail(&info->swaplist, &shmem_swaplist);
mutex_unlock(&shmem_swaplist_mutex);
iput(inode);
}
return 0;
}
shmem_swp_unmap(entry);
unlock:
spin_unlock(&info->lock);
swap_free(swap);
redirty:
set_page_dirty(page);
if (wbc->for_reclaim)
return AOP_WRITEPAGE_ACTIVATE; /* Return with page locked */
unlock_page(page);
return 0;
}
#ifdef CONFIG_NUMA
#ifdef CONFIG_TMPFS
static int shmem_parse_mpol(char *value, int *policy, nodemask_t *policy_nodes)
{
char *nodelist = strchr(value, ':');
int err = 1;
if (nodelist) {
/* NUL-terminate policy string */
*nodelist++ = '\0';
if (nodelist_parse(nodelist, *policy_nodes))
goto out;
memoryless nodes: fixup uses of node_online_map in generic code Here's a cut at fixing up uses of the online node map in generic code. mm/shmem.c:shmem_parse_mpol() Ensure nodelist is subset of nodes with memory. Use node_states[N_HIGH_MEMORY] as default for missing nodelist for interleave policy. mm/shmem.c:shmem_fill_super() initialize policy_nodes to node_states[N_HIGH_MEMORY] mm/page-writeback.c:highmem_dirtyable_memory() sum over nodes with memory mm/page_alloc.c:zlc_setup() allowednodes - use nodes with memory. mm/page_alloc.c:default_zonelist_order() average over nodes with memory. mm/page_alloc.c:find_next_best_node() skip nodes w/o memory. N_HIGH_MEMORY state mask may not be initialized at this time, unless we want to depend on early_calculate_totalpages() [see below]. Will ZONE_MOVABLE ever be configurable? mm/page_alloc.c:find_zone_movable_pfns_for_nodes() spread kernelcore over nodes with memory. This required calling early_calculate_totalpages() unconditionally, and populating N_HIGH_MEMORY node state therein from nodes in the early_node_map[]. If we can depend on this, we can eliminate the population of N_HIGH_MEMORY mask from __build_all_zonelists() and use the N_HIGH_MEMORY mask in find_next_best_node(). mm/mempolicy.c:mpol_check_policy() Ensure nodes specified for policy are subset of nodes with memory. [akpm@linux-foundation.org: fix warnings] Signed-off-by: Lee Schermerhorn <lee.schermerhorn@hp.com> Acked-by: Christoph Lameter <clameter@sgi.com> Cc: Shaohua Li <shaohua.li@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-16 16:25:39 +08:00
if (!nodes_subset(*policy_nodes, node_states[N_HIGH_MEMORY]))
goto out;
}
if (!strcmp(value, "default")) {
*policy = MPOL_DEFAULT;
/* Don't allow a nodelist */
if (!nodelist)
err = 0;
} else if (!strcmp(value, "prefer")) {
*policy = MPOL_PREFERRED;
/* Insist on a nodelist of one node only */
if (nodelist) {
char *rest = nodelist;
while (isdigit(*rest))
rest++;
if (!*rest)
err = 0;
}
} else if (!strcmp(value, "bind")) {
*policy = MPOL_BIND;
/* Insist on a nodelist */
if (nodelist)
err = 0;
} else if (!strcmp(value, "interleave")) {
*policy = MPOL_INTERLEAVE;
memoryless nodes: fixup uses of node_online_map in generic code Here's a cut at fixing up uses of the online node map in generic code. mm/shmem.c:shmem_parse_mpol() Ensure nodelist is subset of nodes with memory. Use node_states[N_HIGH_MEMORY] as default for missing nodelist for interleave policy. mm/shmem.c:shmem_fill_super() initialize policy_nodes to node_states[N_HIGH_MEMORY] mm/page-writeback.c:highmem_dirtyable_memory() sum over nodes with memory mm/page_alloc.c:zlc_setup() allowednodes - use nodes with memory. mm/page_alloc.c:default_zonelist_order() average over nodes with memory. mm/page_alloc.c:find_next_best_node() skip nodes w/o memory. N_HIGH_MEMORY state mask may not be initialized at this time, unless we want to depend on early_calculate_totalpages() [see below]. Will ZONE_MOVABLE ever be configurable? mm/page_alloc.c:find_zone_movable_pfns_for_nodes() spread kernelcore over nodes with memory. This required calling early_calculate_totalpages() unconditionally, and populating N_HIGH_MEMORY node state therein from nodes in the early_node_map[]. If we can depend on this, we can eliminate the population of N_HIGH_MEMORY mask from __build_all_zonelists() and use the N_HIGH_MEMORY mask in find_next_best_node(). mm/mempolicy.c:mpol_check_policy() Ensure nodes specified for policy are subset of nodes with memory. [akpm@linux-foundation.org: fix warnings] Signed-off-by: Lee Schermerhorn <lee.schermerhorn@hp.com> Acked-by: Christoph Lameter <clameter@sgi.com> Cc: Shaohua Li <shaohua.li@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-16 16:25:39 +08:00
/*
* Default to online nodes with memory if no nodelist
*/
if (!nodelist)
memoryless nodes: fixup uses of node_online_map in generic code Here's a cut at fixing up uses of the online node map in generic code. mm/shmem.c:shmem_parse_mpol() Ensure nodelist is subset of nodes with memory. Use node_states[N_HIGH_MEMORY] as default for missing nodelist for interleave policy. mm/shmem.c:shmem_fill_super() initialize policy_nodes to node_states[N_HIGH_MEMORY] mm/page-writeback.c:highmem_dirtyable_memory() sum over nodes with memory mm/page_alloc.c:zlc_setup() allowednodes - use nodes with memory. mm/page_alloc.c:default_zonelist_order() average over nodes with memory. mm/page_alloc.c:find_next_best_node() skip nodes w/o memory. N_HIGH_MEMORY state mask may not be initialized at this time, unless we want to depend on early_calculate_totalpages() [see below]. Will ZONE_MOVABLE ever be configurable? mm/page_alloc.c:find_zone_movable_pfns_for_nodes() spread kernelcore over nodes with memory. This required calling early_calculate_totalpages() unconditionally, and populating N_HIGH_MEMORY node state therein from nodes in the early_node_map[]. If we can depend on this, we can eliminate the population of N_HIGH_MEMORY mask from __build_all_zonelists() and use the N_HIGH_MEMORY mask in find_next_best_node(). mm/mempolicy.c:mpol_check_policy() Ensure nodes specified for policy are subset of nodes with memory. [akpm@linux-foundation.org: fix warnings] Signed-off-by: Lee Schermerhorn <lee.schermerhorn@hp.com> Acked-by: Christoph Lameter <clameter@sgi.com> Cc: Shaohua Li <shaohua.li@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-16 16:25:39 +08:00
*policy_nodes = node_states[N_HIGH_MEMORY];
err = 0;
}
out:
/* Restore string for error message */
if (nodelist)
*--nodelist = ':';
return err;
}
static void shmem_show_mpol(struct seq_file *seq, int policy,
const nodemask_t policy_nodes)
{
char *policy_string;
switch (policy) {
case MPOL_PREFERRED:
policy_string = "prefer";
break;
case MPOL_BIND:
policy_string = "bind";
break;
case MPOL_INTERLEAVE:
policy_string = "interleave";
break;
default:
/* MPOL_DEFAULT */
return;
}
seq_printf(seq, ",mpol=%s", policy_string);
if (policy != MPOL_INTERLEAVE ||
!nodes_equal(policy_nodes, node_states[N_HIGH_MEMORY])) {
char buffer[64];
int len;
len = nodelist_scnprintf(buffer, sizeof(buffer), policy_nodes);
if (len < sizeof(buffer))
seq_printf(seq, ":%s", buffer);
else
seq_printf(seq, ":?");
}
}
#endif /* CONFIG_TMPFS */
static struct page *shmem_swapin(swp_entry_t entry, gfp_t gfp,
struct shmem_inode_info *info, unsigned long idx)
{
struct vm_area_struct pvma;
swapin_readahead: excise NUMA bogosity For three years swapin_readahead has been cluttered with fanciful CONFIG_NUMA code, advancing addr, and stepping on to the next vma at the boundary, to line up the mempolicy for each page allocation. It _might_ be a good idea to allocate swap more according to vma layout; but the fact is, that's not how we do it at all, 2.6 even less than 2.4: swap is allocated as needed for pages as they sink to the bottom of the inactive LRUs. Sometimes that may match vma layout, but not so often that it's worth going to these misleading vma->vm_next lengths: rip all that out. Originally I intended to retain the incrementation of addr, but correct its initial value: valid_swaphandles generally supplies an offset below the target addr (this is readaround rather than readahead), but addr has not been adjusted accordingly, so in the interleave case it has usually been allocating the target page from the "wrong" node (though that may not matter very much). But look at the equivalent shmem_swapin code: either by oversight or by design, though it has all the apparatus for choosing a new mempolicy per page, it uses the same idx throughout, choosing the same mempolicy and interleave node for each page of the cluster. Which is actually a much better strategy: each node has its own LRUs and its own kswapd, so if you're betting on any particular relationship between swap and node, the best bet is that nearby swap entries belong to pages from the same node - even when the mempolicy of the target page is to interleave. And examining a map of nodes corresponding to swap entries on a numa=fake system bears this out. (We could later tweak swap allocation to make it even more likely, but this patch is merely about removing cruft.) So, neither adjust nor increment addr in swapin_readahead, and then shmem_swapin can use it too; the pseudo-vma to pass policy need only be set up once per cluster, and so few fields of pvma are used, let's skip the memset - from shmem_alloc_page also. Signed-off-by: Hugh Dickins <hugh@veritas.com> Acked-by: Rik van Riel <riel@redhat.com> Cc: Andi Kleen <ak@suse.de> Cc: Christoph Lameter <clameter@sgi.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-05 14:28:40 +08:00
struct page *page;
/* Create a pseudo vma that just contains the policy */
swapin_readahead: excise NUMA bogosity For three years swapin_readahead has been cluttered with fanciful CONFIG_NUMA code, advancing addr, and stepping on to the next vma at the boundary, to line up the mempolicy for each page allocation. It _might_ be a good idea to allocate swap more according to vma layout; but the fact is, that's not how we do it at all, 2.6 even less than 2.4: swap is allocated as needed for pages as they sink to the bottom of the inactive LRUs. Sometimes that may match vma layout, but not so often that it's worth going to these misleading vma->vm_next lengths: rip all that out. Originally I intended to retain the incrementation of addr, but correct its initial value: valid_swaphandles generally supplies an offset below the target addr (this is readaround rather than readahead), but addr has not been adjusted accordingly, so in the interleave case it has usually been allocating the target page from the "wrong" node (though that may not matter very much). But look at the equivalent shmem_swapin code: either by oversight or by design, though it has all the apparatus for choosing a new mempolicy per page, it uses the same idx throughout, choosing the same mempolicy and interleave node for each page of the cluster. Which is actually a much better strategy: each node has its own LRUs and its own kswapd, so if you're betting on any particular relationship between swap and node, the best bet is that nearby swap entries belong to pages from the same node - even when the mempolicy of the target page is to interleave. And examining a map of nodes corresponding to swap entries on a numa=fake system bears this out. (We could later tweak swap allocation to make it even more likely, but this patch is merely about removing cruft.) So, neither adjust nor increment addr in swapin_readahead, and then shmem_swapin can use it too; the pseudo-vma to pass policy need only be set up once per cluster, and so few fields of pvma are used, let's skip the memset - from shmem_alloc_page also. Signed-off-by: Hugh Dickins <hugh@veritas.com> Acked-by: Rik van Riel <riel@redhat.com> Cc: Andi Kleen <ak@suse.de> Cc: Christoph Lameter <clameter@sgi.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-05 14:28:40 +08:00
pvma.vm_start = 0;
pvma.vm_pgoff = idx;
swapin_readahead: excise NUMA bogosity For three years swapin_readahead has been cluttered with fanciful CONFIG_NUMA code, advancing addr, and stepping on to the next vma at the boundary, to line up the mempolicy for each page allocation. It _might_ be a good idea to allocate swap more according to vma layout; but the fact is, that's not how we do it at all, 2.6 even less than 2.4: swap is allocated as needed for pages as they sink to the bottom of the inactive LRUs. Sometimes that may match vma layout, but not so often that it's worth going to these misleading vma->vm_next lengths: rip all that out. Originally I intended to retain the incrementation of addr, but correct its initial value: valid_swaphandles generally supplies an offset below the target addr (this is readaround rather than readahead), but addr has not been adjusted accordingly, so in the interleave case it has usually been allocating the target page from the "wrong" node (though that may not matter very much). But look at the equivalent shmem_swapin code: either by oversight or by design, though it has all the apparatus for choosing a new mempolicy per page, it uses the same idx throughout, choosing the same mempolicy and interleave node for each page of the cluster. Which is actually a much better strategy: each node has its own LRUs and its own kswapd, so if you're betting on any particular relationship between swap and node, the best bet is that nearby swap entries belong to pages from the same node - even when the mempolicy of the target page is to interleave. And examining a map of nodes corresponding to swap entries on a numa=fake system bears this out. (We could later tweak swap allocation to make it even more likely, but this patch is merely about removing cruft.) So, neither adjust nor increment addr in swapin_readahead, and then shmem_swapin can use it too; the pseudo-vma to pass policy need only be set up once per cluster, and so few fields of pvma are used, let's skip the memset - from shmem_alloc_page also. Signed-off-by: Hugh Dickins <hugh@veritas.com> Acked-by: Rik van Riel <riel@redhat.com> Cc: Andi Kleen <ak@suse.de> Cc: Christoph Lameter <clameter@sgi.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-05 14:28:40 +08:00
pvma.vm_ops = NULL;
pvma.vm_policy = mpol_shared_policy_lookup(&info->policy, idx);
page = swapin_readahead(entry, gfp, &pvma, 0);
mpol_free(pvma.vm_policy);
return page;
}
static struct page *shmem_alloc_page(gfp_t gfp,
struct shmem_inode_info *info, unsigned long idx)
{
struct vm_area_struct pvma;
struct page *page;
swapin_readahead: excise NUMA bogosity For three years swapin_readahead has been cluttered with fanciful CONFIG_NUMA code, advancing addr, and stepping on to the next vma at the boundary, to line up the mempolicy for each page allocation. It _might_ be a good idea to allocate swap more according to vma layout; but the fact is, that's not how we do it at all, 2.6 even less than 2.4: swap is allocated as needed for pages as they sink to the bottom of the inactive LRUs. Sometimes that may match vma layout, but not so often that it's worth going to these misleading vma->vm_next lengths: rip all that out. Originally I intended to retain the incrementation of addr, but correct its initial value: valid_swaphandles generally supplies an offset below the target addr (this is readaround rather than readahead), but addr has not been adjusted accordingly, so in the interleave case it has usually been allocating the target page from the "wrong" node (though that may not matter very much). But look at the equivalent shmem_swapin code: either by oversight or by design, though it has all the apparatus for choosing a new mempolicy per page, it uses the same idx throughout, choosing the same mempolicy and interleave node for each page of the cluster. Which is actually a much better strategy: each node has its own LRUs and its own kswapd, so if you're betting on any particular relationship between swap and node, the best bet is that nearby swap entries belong to pages from the same node - even when the mempolicy of the target page is to interleave. And examining a map of nodes corresponding to swap entries on a numa=fake system bears this out. (We could later tweak swap allocation to make it even more likely, but this patch is merely about removing cruft.) So, neither adjust nor increment addr in swapin_readahead, and then shmem_swapin can use it too; the pseudo-vma to pass policy need only be set up once per cluster, and so few fields of pvma are used, let's skip the memset - from shmem_alloc_page also. Signed-off-by: Hugh Dickins <hugh@veritas.com> Acked-by: Rik van Riel <riel@redhat.com> Cc: Andi Kleen <ak@suse.de> Cc: Christoph Lameter <clameter@sgi.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-05 14:28:40 +08:00
/* Create a pseudo vma that just contains the policy */
pvma.vm_start = 0;
pvma.vm_pgoff = idx;
swapin_readahead: excise NUMA bogosity For three years swapin_readahead has been cluttered with fanciful CONFIG_NUMA code, advancing addr, and stepping on to the next vma at the boundary, to line up the mempolicy for each page allocation. It _might_ be a good idea to allocate swap more according to vma layout; but the fact is, that's not how we do it at all, 2.6 even less than 2.4: swap is allocated as needed for pages as they sink to the bottom of the inactive LRUs. Sometimes that may match vma layout, but not so often that it's worth going to these misleading vma->vm_next lengths: rip all that out. Originally I intended to retain the incrementation of addr, but correct its initial value: valid_swaphandles generally supplies an offset below the target addr (this is readaround rather than readahead), but addr has not been adjusted accordingly, so in the interleave case it has usually been allocating the target page from the "wrong" node (though that may not matter very much). But look at the equivalent shmem_swapin code: either by oversight or by design, though it has all the apparatus for choosing a new mempolicy per page, it uses the same idx throughout, choosing the same mempolicy and interleave node for each page of the cluster. Which is actually a much better strategy: each node has its own LRUs and its own kswapd, so if you're betting on any particular relationship between swap and node, the best bet is that nearby swap entries belong to pages from the same node - even when the mempolicy of the target page is to interleave. And examining a map of nodes corresponding to swap entries on a numa=fake system bears this out. (We could later tweak swap allocation to make it even more likely, but this patch is merely about removing cruft.) So, neither adjust nor increment addr in swapin_readahead, and then shmem_swapin can use it too; the pseudo-vma to pass policy need only be set up once per cluster, and so few fields of pvma are used, let's skip the memset - from shmem_alloc_page also. Signed-off-by: Hugh Dickins <hugh@veritas.com> Acked-by: Rik van Riel <riel@redhat.com> Cc: Andi Kleen <ak@suse.de> Cc: Christoph Lameter <clameter@sgi.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-05 14:28:40 +08:00
pvma.vm_ops = NULL;
pvma.vm_policy = mpol_shared_policy_lookup(&info->policy, idx);
page = alloc_page_vma(gfp, &pvma, 0);
mpol_free(pvma.vm_policy);
return page;
}
#else /* !CONFIG_NUMA */
#ifdef CONFIG_TMPFS
memoryless nodes: fixup uses of node_online_map in generic code Here's a cut at fixing up uses of the online node map in generic code. mm/shmem.c:shmem_parse_mpol() Ensure nodelist is subset of nodes with memory. Use node_states[N_HIGH_MEMORY] as default for missing nodelist for interleave policy. mm/shmem.c:shmem_fill_super() initialize policy_nodes to node_states[N_HIGH_MEMORY] mm/page-writeback.c:highmem_dirtyable_memory() sum over nodes with memory mm/page_alloc.c:zlc_setup() allowednodes - use nodes with memory. mm/page_alloc.c:default_zonelist_order() average over nodes with memory. mm/page_alloc.c:find_next_best_node() skip nodes w/o memory. N_HIGH_MEMORY state mask may not be initialized at this time, unless we want to depend on early_calculate_totalpages() [see below]. Will ZONE_MOVABLE ever be configurable? mm/page_alloc.c:find_zone_movable_pfns_for_nodes() spread kernelcore over nodes with memory. This required calling early_calculate_totalpages() unconditionally, and populating N_HIGH_MEMORY node state therein from nodes in the early_node_map[]. If we can depend on this, we can eliminate the population of N_HIGH_MEMORY mask from __build_all_zonelists() and use the N_HIGH_MEMORY mask in find_next_best_node(). mm/mempolicy.c:mpol_check_policy() Ensure nodes specified for policy are subset of nodes with memory. [akpm@linux-foundation.org: fix warnings] Signed-off-by: Lee Schermerhorn <lee.schermerhorn@hp.com> Acked-by: Christoph Lameter <clameter@sgi.com> Cc: Shaohua Li <shaohua.li@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-16 16:25:39 +08:00
static inline int shmem_parse_mpol(char *value, int *policy,
nodemask_t *policy_nodes)
{
return 1;
}
static inline void shmem_show_mpol(struct seq_file *seq, int policy,
const nodemask_t policy_nodes)
{
}
#endif /* CONFIG_TMPFS */
static inline struct page *shmem_swapin(swp_entry_t entry, gfp_t gfp,
struct shmem_inode_info *info, unsigned long idx)
{
return swapin_readahead(entry, gfp, NULL, 0);
}
static inline struct page *shmem_alloc_page(gfp_t gfp,
struct shmem_inode_info *info, unsigned long idx)
{
return alloc_page(gfp);
}
#endif /* CONFIG_NUMA */
/*
* shmem_getpage - either get the page from swap or allocate a new one
*
* If we allocate a new one we do not mark it dirty. That's up to the
* vm. If we swap it in we mark it dirty since we also free the swap
* entry since a page cannot live in both the swap and page cache
*/
static int shmem_getpage(struct inode *inode, unsigned long idx,
struct page **pagep, enum sgp_type sgp, int *type)
{
struct address_space *mapping = inode->i_mapping;
struct shmem_inode_info *info = SHMEM_I(inode);
struct shmem_sb_info *sbinfo;
struct page *filepage = *pagep;
struct page *swappage;
swp_entry_t *entry;
swp_entry_t swap;
gfp_t gfp;
int error;
if (idx >= SHMEM_MAX_INDEX)
return -EFBIG;
mm: merge populate and nopage into fault (fixes nonlinear) Nonlinear mappings are (AFAIKS) simply a virtual memory concept that encodes the virtual address -> file offset differently from linear mappings. ->populate is a layering violation because the filesystem/pagecache code should need to know anything about the virtual memory mapping. The hitch here is that the ->nopage handler didn't pass down enough information (ie. pgoff). But it is more logical to pass pgoff rather than have the ->nopage function calculate it itself anyway (because that's a similar layering violation). Having the populate handler install the pte itself is likewise a nasty thing to be doing. This patch introduces a new fault handler that replaces ->nopage and ->populate and (later) ->nopfn. Most of the old mechanism is still in place so there is a lot of duplication and nice cleanups that can be removed if everyone switches over. The rationale for doing this in the first place is that nonlinear mappings are subject to the pagefault vs invalidate/truncate race too, and it seemed stupid to duplicate the synchronisation logic rather than just consolidate the two. After this patch, MAP_NONBLOCK no longer sets up ptes for pages present in pagecache. Seems like a fringe functionality anyway. NOPAGE_REFAULT is removed. This should be implemented with ->fault, and no users have hit mainline yet. [akpm@linux-foundation.org: cleanup] [randy.dunlap@oracle.com: doc. fixes for readahead] [akpm@linux-foundation.org: build fix] Signed-off-by: Nick Piggin <npiggin@suse.de> Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Cc: Mark Fasheh <mark.fasheh@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-19 16:46:59 +08:00
if (type)
mm: fault feedback #2 This patch completes Linus's wish that the fault return codes be made into bit flags, which I agree makes everything nicer. This requires requires all handle_mm_fault callers to be modified (possibly the modifications should go further and do things like fault accounting in handle_mm_fault -- however that would be for another patch). [akpm@linux-foundation.org: fix alpha build] [akpm@linux-foundation.org: fix s390 build] [akpm@linux-foundation.org: fix sparc build] [akpm@linux-foundation.org: fix sparc64 build] [akpm@linux-foundation.org: fix ia64 build] Signed-off-by: Nick Piggin <npiggin@suse.de> Cc: Richard Henderson <rth@twiddle.net> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Ian Molton <spyro@f2s.com> Cc: Bryan Wu <bryan.wu@analog.com> Cc: Mikael Starvik <starvik@axis.com> Cc: David Howells <dhowells@redhat.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: "Luck, Tony" <tony.luck@intel.com> Cc: Hirokazu Takata <takata@linux-m32r.org> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Roman Zippel <zippel@linux-m68k.org> Cc: Greg Ungerer <gerg@uclinux.org> Cc: Matthew Wilcox <willy@debian.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Kazumoto Kojima <kkojima@rr.iij4u.or.jp> Cc: Richard Curnow <rc@rc0.org.uk> Cc: William Lee Irwin III <wli@holomorphy.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jeff Dike <jdike@addtoit.com> Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Cc: Miles Bader <uclinux-v850@lsi.nec.co.jp> Cc: Chris Zankel <chris@zankel.net> Acked-by: Kyle McMartin <kyle@mcmartin.ca> Acked-by: Haavard Skinnemoen <hskinnemoen@atmel.com> Acked-by: Ralf Baechle <ralf@linux-mips.org> Acked-by: Andi Kleen <ak@muc.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> [ Still apparently needs some ARM and PPC loving - Linus ] Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-19 16:47:05 +08:00
*type = 0;
mm: merge populate and nopage into fault (fixes nonlinear) Nonlinear mappings are (AFAIKS) simply a virtual memory concept that encodes the virtual address -> file offset differently from linear mappings. ->populate is a layering violation because the filesystem/pagecache code should need to know anything about the virtual memory mapping. The hitch here is that the ->nopage handler didn't pass down enough information (ie. pgoff). But it is more logical to pass pgoff rather than have the ->nopage function calculate it itself anyway (because that's a similar layering violation). Having the populate handler install the pte itself is likewise a nasty thing to be doing. This patch introduces a new fault handler that replaces ->nopage and ->populate and (later) ->nopfn. Most of the old mechanism is still in place so there is a lot of duplication and nice cleanups that can be removed if everyone switches over. The rationale for doing this in the first place is that nonlinear mappings are subject to the pagefault vs invalidate/truncate race too, and it seemed stupid to duplicate the synchronisation logic rather than just consolidate the two. After this patch, MAP_NONBLOCK no longer sets up ptes for pages present in pagecache. Seems like a fringe functionality anyway. NOPAGE_REFAULT is removed. This should be implemented with ->fault, and no users have hit mainline yet. [akpm@linux-foundation.org: cleanup] [randy.dunlap@oracle.com: doc. fixes for readahead] [akpm@linux-foundation.org: build fix] Signed-off-by: Nick Piggin <npiggin@suse.de> Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Cc: Mark Fasheh <mark.fasheh@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-19 16:46:59 +08:00
/*
* Normally, filepage is NULL on entry, and either found
* uptodate immediately, or allocated and zeroed, or read
* in under swappage, which is then assigned to filepage.
* But shmem_readpage (required for splice) passes in a locked
* filepage, which may be found not uptodate by other callers
* too, and may need to be copied from the swappage read in.
*/
repeat:
if (!filepage)
filepage = find_lock_page(mapping, idx);
if (filepage && PageUptodate(filepage))
goto done;
error = 0;
gfp = mapping_gfp_mask(mapping);
if (!filepage) {
/*
* Try to preload while we can wait, to not make a habit of
* draining atomic reserves; but don't latch on to this cpu.
*/
error = radix_tree_preload(gfp & ~__GFP_HIGHMEM);
if (error)
goto failed;
radix_tree_preload_end();
}
spin_lock(&info->lock);
shmem_recalc_inode(inode);
entry = shmem_swp_alloc(info, idx, sgp);
if (IS_ERR(entry)) {
spin_unlock(&info->lock);
error = PTR_ERR(entry);
goto failed;
}
swap = *entry;
if (swap.val) {
/* Look it up and read it in.. */
swappage = lookup_swap_cache(swap);
if (!swappage) {
shmem_swp_unmap(entry);
/* here we actually do the io */
mm: fault feedback #2 This patch completes Linus's wish that the fault return codes be made into bit flags, which I agree makes everything nicer. This requires requires all handle_mm_fault callers to be modified (possibly the modifications should go further and do things like fault accounting in handle_mm_fault -- however that would be for another patch). [akpm@linux-foundation.org: fix alpha build] [akpm@linux-foundation.org: fix s390 build] [akpm@linux-foundation.org: fix sparc build] [akpm@linux-foundation.org: fix sparc64 build] [akpm@linux-foundation.org: fix ia64 build] Signed-off-by: Nick Piggin <npiggin@suse.de> Cc: Richard Henderson <rth@twiddle.net> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Ian Molton <spyro@f2s.com> Cc: Bryan Wu <bryan.wu@analog.com> Cc: Mikael Starvik <starvik@axis.com> Cc: David Howells <dhowells@redhat.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: "Luck, Tony" <tony.luck@intel.com> Cc: Hirokazu Takata <takata@linux-m32r.org> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Roman Zippel <zippel@linux-m68k.org> Cc: Greg Ungerer <gerg@uclinux.org> Cc: Matthew Wilcox <willy@debian.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Kazumoto Kojima <kkojima@rr.iij4u.or.jp> Cc: Richard Curnow <rc@rc0.org.uk> Cc: William Lee Irwin III <wli@holomorphy.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jeff Dike <jdike@addtoit.com> Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Cc: Miles Bader <uclinux-v850@lsi.nec.co.jp> Cc: Chris Zankel <chris@zankel.net> Acked-by: Kyle McMartin <kyle@mcmartin.ca> Acked-by: Haavard Skinnemoen <hskinnemoen@atmel.com> Acked-by: Ralf Baechle <ralf@linux-mips.org> Acked-by: Andi Kleen <ak@muc.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> [ Still apparently needs some ARM and PPC loving - Linus ] Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-19 16:47:05 +08:00
if (type && !(*type & VM_FAULT_MAJOR)) {
[PATCH] Light weight event counters The remaining counters in page_state after the zoned VM counter patches have been applied are all just for show in /proc/vmstat. They have no essential function for the VM. We use a simple increment of per cpu variables. In order to avoid the most severe races we disable preempt. Preempt does not prevent the race between an increment and an interrupt handler incrementing the same statistics counter. However, that race is exceedingly rare, we may only loose one increment or so and there is no requirement (at least not in kernel) that the vm event counters have to be accurate. In the non preempt case this results in a simple increment for each counter. For many architectures this will be reduced by the compiler to a single instruction. This single instruction is atomic for i386 and x86_64. And therefore even the rare race condition in an interrupt is avoided for both architectures in most cases. The patchset also adds an off switch for embedded systems that allows a building of linux kernels without these counters. The implementation of these counters is through inline code that hopefully results in only a single instruction increment instruction being emitted (i386, x86_64) or in the increment being hidden though instruction concurrency (EPIC architectures such as ia64 can get that done). Benefits: - VM event counter operations usually reduce to a single inline instruction on i386 and x86_64. - No interrupt disable, only preempt disable for the preempt case. Preempt disable can also be avoided by moving the counter into a spinlock. - Handling is similar to zoned VM counters. - Simple and easily extendable. - Can be omitted to reduce memory use for embedded use. References: RFC http://marc.theaimsgroup.com/?l=linux-kernel&m=113512330605497&w=2 RFC http://marc.theaimsgroup.com/?l=linux-kernel&m=114988082814934&w=2 local_t http://marc.theaimsgroup.com/?l=linux-kernel&m=114991748606690&w=2 V2 http://marc.theaimsgroup.com/?t=115014808400007&r=1&w=2 V3 http://marc.theaimsgroup.com/?l=linux-kernel&m=115024767022346&w=2 V4 http://marc.theaimsgroup.com/?l=linux-kernel&m=115047968808926&w=2 Signed-off-by: Christoph Lameter <clameter@sgi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-30 16:55:45 +08:00
__count_vm_event(PGMAJFAULT);
mm: fault feedback #2 This patch completes Linus's wish that the fault return codes be made into bit flags, which I agree makes everything nicer. This requires requires all handle_mm_fault callers to be modified (possibly the modifications should go further and do things like fault accounting in handle_mm_fault -- however that would be for another patch). [akpm@linux-foundation.org: fix alpha build] [akpm@linux-foundation.org: fix s390 build] [akpm@linux-foundation.org: fix sparc build] [akpm@linux-foundation.org: fix sparc64 build] [akpm@linux-foundation.org: fix ia64 build] Signed-off-by: Nick Piggin <npiggin@suse.de> Cc: Richard Henderson <rth@twiddle.net> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Ian Molton <spyro@f2s.com> Cc: Bryan Wu <bryan.wu@analog.com> Cc: Mikael Starvik <starvik@axis.com> Cc: David Howells <dhowells@redhat.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: "Luck, Tony" <tony.luck@intel.com> Cc: Hirokazu Takata <takata@linux-m32r.org> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Roman Zippel <zippel@linux-m68k.org> Cc: Greg Ungerer <gerg@uclinux.org> Cc: Matthew Wilcox <willy@debian.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Kazumoto Kojima <kkojima@rr.iij4u.or.jp> Cc: Richard Curnow <rc@rc0.org.uk> Cc: William Lee Irwin III <wli@holomorphy.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jeff Dike <jdike@addtoit.com> Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Cc: Miles Bader <uclinux-v850@lsi.nec.co.jp> Cc: Chris Zankel <chris@zankel.net> Acked-by: Kyle McMartin <kyle@mcmartin.ca> Acked-by: Haavard Skinnemoen <hskinnemoen@atmel.com> Acked-by: Ralf Baechle <ralf@linux-mips.org> Acked-by: Andi Kleen <ak@muc.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> [ Still apparently needs some ARM and PPC loving - Linus ] Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-19 16:47:05 +08:00
*type |= VM_FAULT_MAJOR;
}
[PATCH] Light weight event counters The remaining counters in page_state after the zoned VM counter patches have been applied are all just for show in /proc/vmstat. They have no essential function for the VM. We use a simple increment of per cpu variables. In order to avoid the most severe races we disable preempt. Preempt does not prevent the race between an increment and an interrupt handler incrementing the same statistics counter. However, that race is exceedingly rare, we may only loose one increment or so and there is no requirement (at least not in kernel) that the vm event counters have to be accurate. In the non preempt case this results in a simple increment for each counter. For many architectures this will be reduced by the compiler to a single instruction. This single instruction is atomic for i386 and x86_64. And therefore even the rare race condition in an interrupt is avoided for both architectures in most cases. The patchset also adds an off switch for embedded systems that allows a building of linux kernels without these counters. The implementation of these counters is through inline code that hopefully results in only a single instruction increment instruction being emitted (i386, x86_64) or in the increment being hidden though instruction concurrency (EPIC architectures such as ia64 can get that done). Benefits: - VM event counter operations usually reduce to a single inline instruction on i386 and x86_64. - No interrupt disable, only preempt disable for the preempt case. Preempt disable can also be avoided by moving the counter into a spinlock. - Handling is similar to zoned VM counters. - Simple and easily extendable. - Can be omitted to reduce memory use for embedded use. References: RFC http://marc.theaimsgroup.com/?l=linux-kernel&m=113512330605497&w=2 RFC http://marc.theaimsgroup.com/?l=linux-kernel&m=114988082814934&w=2 local_t http://marc.theaimsgroup.com/?l=linux-kernel&m=114991748606690&w=2 V2 http://marc.theaimsgroup.com/?t=115014808400007&r=1&w=2 V3 http://marc.theaimsgroup.com/?l=linux-kernel&m=115024767022346&w=2 V4 http://marc.theaimsgroup.com/?l=linux-kernel&m=115047968808926&w=2 Signed-off-by: Christoph Lameter <clameter@sgi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-30 16:55:45 +08:00
spin_unlock(&info->lock);
swappage = shmem_swapin(swap, gfp, info, idx);
if (!swappage) {
spin_lock(&info->lock);
entry = shmem_swp_alloc(info, idx, sgp);
if (IS_ERR(entry))
error = PTR_ERR(entry);
else {
if (entry->val == swap.val)
error = -ENOMEM;
shmem_swp_unmap(entry);
}
spin_unlock(&info->lock);
if (error)
goto failed;
goto repeat;
}
wait_on_page_locked(swappage);
page_cache_release(swappage);
goto repeat;
}
/* We have to do this with page locked to prevent races */
if (TestSetPageLocked(swappage)) {
shmem_swp_unmap(entry);
spin_unlock(&info->lock);
wait_on_page_locked(swappage);
page_cache_release(swappage);
goto repeat;
}
if (PageWriteback(swappage)) {
shmem_swp_unmap(entry);
spin_unlock(&info->lock);
wait_on_page_writeback(swappage);
unlock_page(swappage);
page_cache_release(swappage);
goto repeat;
}
if (!PageUptodate(swappage)) {
shmem_swp_unmap(entry);
spin_unlock(&info->lock);
unlock_page(swappage);
page_cache_release(swappage);
error = -EIO;
goto failed;
}
if (filepage) {
shmem_swp_set(info, entry, 0);
shmem_swp_unmap(entry);
delete_from_swap_cache(swappage);
spin_unlock(&info->lock);
copy_highpage(filepage, swappage);
unlock_page(swappage);
page_cache_release(swappage);
flush_dcache_page(filepage);
SetPageUptodate(filepage);
set_page_dirty(filepage);
swap_free(swap);
} else if (!(error = add_to_page_cache(
swappage, mapping, idx, GFP_NOWAIT))) {
info->flags |= SHMEM_PAGEIN;
shmem_swp_set(info, entry, 0);
shmem_swp_unmap(entry);
delete_from_swap_cache(swappage);
spin_unlock(&info->lock);
filepage = swappage;
set_page_dirty(filepage);
swap_free(swap);
} else {
shmem_swp_unmap(entry);
spin_unlock(&info->lock);
unlock_page(swappage);
if (error == -ENOMEM) {
/* allow reclaim from this memory cgroup */
error = mem_cgroup_cache_charge(swappage,
current->mm, gfp & ~__GFP_HIGHMEM);
if (error) {
page_cache_release(swappage);
goto failed;
}
mem_cgroup_uncharge_page(swappage);
}
page_cache_release(swappage);
goto repeat;
}
} else if (sgp == SGP_READ && !filepage) {
shmem_swp_unmap(entry);
filepage = find_get_page(mapping, idx);
if (filepage &&
(!PageUptodate(filepage) || TestSetPageLocked(filepage))) {
spin_unlock(&info->lock);
wait_on_page_locked(filepage);
page_cache_release(filepage);
filepage = NULL;
goto repeat;
}
spin_unlock(&info->lock);
} else {
shmem_swp_unmap(entry);
sbinfo = SHMEM_SB(inode->i_sb);
if (sbinfo->max_blocks) {
spin_lock(&sbinfo->stat_lock);
if (sbinfo->free_blocks == 0 ||
shmem_acct_block(info->flags)) {
spin_unlock(&sbinfo->stat_lock);
spin_unlock(&info->lock);
error = -ENOSPC;
goto failed;
}
sbinfo->free_blocks--;
inode->i_blocks += BLOCKS_PER_PAGE;
spin_unlock(&sbinfo->stat_lock);
} else if (shmem_acct_block(info->flags)) {
spin_unlock(&info->lock);
error = -ENOSPC;
goto failed;
}
if (!filepage) {
spin_unlock(&info->lock);
filepage = shmem_alloc_page(gfp, info, idx);
if (!filepage) {
shmem_unacct_blocks(info->flags, 1);
shmem_free_blocks(inode, 1);
error = -ENOMEM;
goto failed;
}
/* Precharge page while we can wait, compensate after */
error = mem_cgroup_cache_charge(filepage, current->mm,
gfp & ~__GFP_HIGHMEM);
if (error) {
page_cache_release(filepage);
shmem_unacct_blocks(info->flags, 1);
shmem_free_blocks(inode, 1);
filepage = NULL;
goto failed;
}
spin_lock(&info->lock);
entry = shmem_swp_alloc(info, idx, sgp);
if (IS_ERR(entry))
error = PTR_ERR(entry);
else {
swap = *entry;
shmem_swp_unmap(entry);
}
if (error || swap.val || 0 != add_to_page_cache_lru(
filepage, mapping, idx, GFP_NOWAIT)) {
spin_unlock(&info->lock);
mem_cgroup_uncharge_page(filepage);
page_cache_release(filepage);
shmem_unacct_blocks(info->flags, 1);
shmem_free_blocks(inode, 1);
filepage = NULL;
if (error)
goto failed;
goto repeat;
}
mem_cgroup_uncharge_page(filepage);
info->flags |= SHMEM_PAGEIN;
}
info->alloced++;
spin_unlock(&info->lock);
clear_highpage(filepage);
flush_dcache_page(filepage);
SetPageUptodate(filepage);
if (sgp == SGP_DIRTY)
set_page_dirty(filepage);
}
done:
*pagep = filepage;
return 0;
failed:
if (*pagep != filepage) {
unlock_page(filepage);
page_cache_release(filepage);
}
return error;
}
static int shmem_fault(struct vm_area_struct *vma, struct vm_fault *vmf)
{
struct inode *inode = vma->vm_file->f_path.dentry->d_inode;
int error;
int ret;
if (((loff_t)vmf->pgoff << PAGE_CACHE_SHIFT) >= i_size_read(inode))
return VM_FAULT_SIGBUS;
mm: fix fault vs invalidate race for linear mappings Fix the race between invalidate_inode_pages and do_no_page. Andrea Arcangeli identified a subtle race between invalidation of pages from pagecache with userspace mappings, and do_no_page. The issue is that invalidation has to shoot down all mappings to the page, before it can be discarded from the pagecache. Between shooting down ptes to a particular page, and actually dropping the struct page from the pagecache, do_no_page from any process might fault on that page and establish a new mapping to the page just before it gets discarded from the pagecache. The most common case where such invalidation is used is in file truncation. This case was catered for by doing a sort of open-coded seqlock between the file's i_size, and its truncate_count. Truncation will decrease i_size, then increment truncate_count before unmapping userspace pages; do_no_page will read truncate_count, then find the page if it is within i_size, and then check truncate_count under the page table lock and back out and retry if it had subsequently been changed (ptl will serialise against unmapping, and ensure a potentially updated truncate_count is actually visible). Complexity and documentation issues aside, the locking protocol fails in the case where we would like to invalidate pagecache inside i_size. do_no_page can come in anytime and filemap_nopage is not aware of the invalidation in progress (as it is when it is outside i_size). The end result is that dangling (->mapping == NULL) pages that appear to be from a particular file may be mapped into userspace with nonsense data. Valid mappings to the same place will see a different page. Andrea implemented two working fixes, one using a real seqlock, another using a page->flags bit. He also proposed using the page lock in do_no_page, but that was initially considered too heavyweight. However, it is not a global or per-file lock, and the page cacheline is modified in do_no_page to increment _count and _mapcount anyway, so a further modification should not be a large performance hit. Scalability is not an issue. This patch implements this latter approach. ->nopage implementations return with the page locked if it is possible for their underlying file to be invalidated (in that case, they must set a special vm_flags bit to indicate so). do_no_page only unlocks the page after setting up the mapping completely. invalidation is excluded because it holds the page lock during invalidation of each page (and ensures that the page is not mapped while holding the lock). This also allows significant simplifications in do_no_page, because we have the page locked in the right place in the pagecache from the start. Signed-off-by: Nick Piggin <npiggin@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-19 16:46:57 +08:00
error = shmem_getpage(inode, vmf->pgoff, &vmf->page, SGP_CACHE, &ret);
if (error)
return ((error == -ENOMEM) ? VM_FAULT_OOM : VM_FAULT_SIGBUS);
mark_page_accessed(vmf->page);
mm: fault feedback #2 This patch completes Linus's wish that the fault return codes be made into bit flags, which I agree makes everything nicer. This requires requires all handle_mm_fault callers to be modified (possibly the modifications should go further and do things like fault accounting in handle_mm_fault -- however that would be for another patch). [akpm@linux-foundation.org: fix alpha build] [akpm@linux-foundation.org: fix s390 build] [akpm@linux-foundation.org: fix sparc build] [akpm@linux-foundation.org: fix sparc64 build] [akpm@linux-foundation.org: fix ia64 build] Signed-off-by: Nick Piggin <npiggin@suse.de> Cc: Richard Henderson <rth@twiddle.net> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Ian Molton <spyro@f2s.com> Cc: Bryan Wu <bryan.wu@analog.com> Cc: Mikael Starvik <starvik@axis.com> Cc: David Howells <dhowells@redhat.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: "Luck, Tony" <tony.luck@intel.com> Cc: Hirokazu Takata <takata@linux-m32r.org> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Roman Zippel <zippel@linux-m68k.org> Cc: Greg Ungerer <gerg@uclinux.org> Cc: Matthew Wilcox <willy@debian.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Kazumoto Kojima <kkojima@rr.iij4u.or.jp> Cc: Richard Curnow <rc@rc0.org.uk> Cc: William Lee Irwin III <wli@holomorphy.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jeff Dike <jdike@addtoit.com> Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Cc: Miles Bader <uclinux-v850@lsi.nec.co.jp> Cc: Chris Zankel <chris@zankel.net> Acked-by: Kyle McMartin <kyle@mcmartin.ca> Acked-by: Haavard Skinnemoen <hskinnemoen@atmel.com> Acked-by: Ralf Baechle <ralf@linux-mips.org> Acked-by: Andi Kleen <ak@muc.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> [ Still apparently needs some ARM and PPC loving - Linus ] Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-19 16:47:05 +08:00
return ret | VM_FAULT_LOCKED;
}
#ifdef CONFIG_NUMA
static int shmem_set_policy(struct vm_area_struct *vma, struct mempolicy *new)
{
struct inode *i = vma->vm_file->f_path.dentry->d_inode;
return mpol_set_shared_policy(&SHMEM_I(i)->policy, vma, new);
}
static struct mempolicy *shmem_get_policy(struct vm_area_struct *vma,
unsigned long addr)
{
struct inode *i = vma->vm_file->f_path.dentry->d_inode;
unsigned long idx;
idx = ((addr - vma->vm_start) >> PAGE_SHIFT) + vma->vm_pgoff;
return mpol_shared_policy_lookup(&SHMEM_I(i)->policy, idx);
}
#endif
int shmem_lock(struct file *file, int lock, struct user_struct *user)
{
struct inode *inode = file->f_path.dentry->d_inode;
struct shmem_inode_info *info = SHMEM_I(inode);
int retval = -ENOMEM;
spin_lock(&info->lock);
if (lock && !(info->flags & VM_LOCKED)) {
if (!user_shm_lock(inode->i_size, user))
goto out_nomem;
info->flags |= VM_LOCKED;
}
if (!lock && (info->flags & VM_LOCKED) && user) {
user_shm_unlock(inode->i_size, user);
info->flags &= ~VM_LOCKED;
}
retval = 0;
out_nomem:
spin_unlock(&info->lock);
return retval;
}
static int shmem_mmap(struct file *file, struct vm_area_struct *vma)
{
file_accessed(file);
vma->vm_ops = &shmem_vm_ops;
vma->vm_flags |= VM_CAN_NONLINEAR;
return 0;
}
static struct inode *
shmem_get_inode(struct super_block *sb, int mode, dev_t dev)
{
struct inode *inode;
struct shmem_inode_info *info;
struct shmem_sb_info *sbinfo = SHMEM_SB(sb);
if (shmem_reserve_inode(sb))
return NULL;
inode = new_inode(sb);
if (inode) {
inode->i_mode = mode;
inode->i_uid = current->fsuid;
inode->i_gid = current->fsgid;
inode->i_blocks = 0;
inode->i_mapping->a_ops = &shmem_aops;
inode->i_mapping->backing_dev_info = &shmem_backing_dev_info;
inode->i_atime = inode->i_mtime = inode->i_ctime = CURRENT_TIME;
[PATCH] knfsd: add nfs-export support to tmpfs We need to encode a decode the 'file' part of a handle. We simply use the inode number and generation number to construct the filehandle. The generation number is the time when the file was created. As inode numbers cycle through the full 32 bits before being reused, there is no real chance of the same inum being allocated to different files in the same second so this is suitably unique. Using time-of-day rather than e.g. jiffies makes it less likely that the same filehandle can be created after a reboot. In order to be able to decode a filehandle we need to be able to lookup by inum, which means that the inode needs to be added to the inode hash table (tmpfs doesn't currently hash inodes as there is never a need to lookup by inum). To avoid overhead when not exporting, we only hash an inode when it is first exported. This requires a lock to ensure it isn't hashed twice. This code is separate from the patch posted in June06 from Atal Shargorodsky which provided the same functionality, but does borrow slightly from it. Locking comment: Most filesystems that hash their inodes do so at the point where the 'struct inode' is initialised, and that has suitable locking (I_NEW). Here in shmem, we are hashing the inode later, the first time we need an NFS file handle for it. We no longer have I_NEW to ensure only one thread tries to add it to the hash table. Cc: Atal Shargorodsky <atal@codefidence.com> Cc: Gilad Ben-Yossef <gilad@codefidence.com> Signed-off-by: David M. Grimes <dgrimes@navisite.com> Signed-off-by: Neil Brown <neilb@suse.de> Acked-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-17 15:09:45 +08:00
inode->i_generation = get_seconds();
info = SHMEM_I(inode);
memset(info, 0, (char *)inode - (char *)info);
spin_lock_init(&info->lock);
INIT_LIST_HEAD(&info->swaplist);
switch (mode & S_IFMT) {
default:
inode->i_op = &shmem_special_inode_operations;
init_special_inode(inode, mode, dev);
break;
case S_IFREG:
inode->i_op = &shmem_inode_operations;
inode->i_fop = &shmem_file_operations;
mpol_shared_policy_init(&info->policy, sbinfo->policy,
&sbinfo->policy_nodes);
break;
case S_IFDIR:
inc_nlink(inode);
/* Some things misbehave if size == 0 on a directory */
inode->i_size = 2 * BOGO_DIRENT_SIZE;
inode->i_op = &shmem_dir_inode_operations;
inode->i_fop = &simple_dir_operations;
break;
case S_IFLNK:
/*
* Must not load anything in the rbtree,
* mpol_free_shared_policy will not be called.
*/
mpol_shared_policy_init(&info->policy, MPOL_DEFAULT,
NULL);
break;
}
} else
shmem_free_inode(sb);
return inode;
}
#ifdef CONFIG_TMPFS
static const struct inode_operations shmem_symlink_inode_operations;
static const struct inode_operations shmem_symlink_inline_operations;
/*
* Normally tmpfs avoids the use of shmem_readpage and shmem_write_begin;
* but providing them allows a tmpfs file to be used for splice, sendfile, and
* below the loop driver, in the generic fashion that many filesystems support.
*/
static int shmem_readpage(struct file *file, struct page *page)
{
struct inode *inode = page->mapping->host;
int error = shmem_getpage(inode, page->index, &page, SGP_CACHE, NULL);
unlock_page(page);
return error;
}
static int
shmem_write_begin(struct file *file, struct address_space *mapping,
loff_t pos, unsigned len, unsigned flags,
struct page **pagep, void **fsdata)
{
struct inode *inode = mapping->host;
pgoff_t index = pos >> PAGE_CACHE_SHIFT;
*pagep = NULL;
return shmem_getpage(inode, index, pagep, SGP_WRITE, NULL);
}
static int
shmem_write_end(struct file *file, struct address_space *mapping,
loff_t pos, unsigned len, unsigned copied,
struct page *page, void *fsdata)
{
struct inode *inode = mapping->host;
if (pos + copied > inode->i_size)
i_size_write(inode, pos + copied);
unlock_page(page);
set_page_dirty(page);
page_cache_release(page);
return copied;
}
static void do_shmem_file_read(struct file *filp, loff_t *ppos, read_descriptor_t *desc, read_actor_t actor)
{
struct inode *inode = filp->f_path.dentry->d_inode;
struct address_space *mapping = inode->i_mapping;
unsigned long index, offset;
enum sgp_type sgp = SGP_READ;
/*
* Might this read be for a stacking filesystem? Then when reading
* holes of a sparse file, we actually need to allocate those pages,
* and even mark them dirty, so it cannot exceed the max_blocks limit.
*/
if (segment_eq(get_fs(), KERNEL_DS))
sgp = SGP_DIRTY;
index = *ppos >> PAGE_CACHE_SHIFT;
offset = *ppos & ~PAGE_CACHE_MASK;
for (;;) {
struct page *page = NULL;
unsigned long end_index, nr, ret;
loff_t i_size = i_size_read(inode);
end_index = i_size >> PAGE_CACHE_SHIFT;
if (index > end_index)
break;
if (index == end_index) {
nr = i_size & ~PAGE_CACHE_MASK;
if (nr <= offset)
break;
}
desc->error = shmem_getpage(inode, index, &page, sgp, NULL);
if (desc->error) {
if (desc->error == -EINVAL)
desc->error = 0;
break;
}
if (page)
unlock_page(page);
/*
* We must evaluate after, since reads (unlike writes)
* are called without i_mutex protection against truncate
*/
nr = PAGE_CACHE_SIZE;
i_size = i_size_read(inode);
end_index = i_size >> PAGE_CACHE_SHIFT;
if (index == end_index) {
nr = i_size & ~PAGE_CACHE_MASK;
if (nr <= offset) {
if (page)
page_cache_release(page);
break;
}
}
nr -= offset;
if (page) {
/*
* If users can be writing to this page using arbitrary
* virtual addresses, take care about potential aliasing
* before reading the page on the kernel side.
*/
if (mapping_writably_mapped(mapping))
flush_dcache_page(page);
/*
* Mark the page accessed if we read the beginning.
*/
if (!offset)
mark_page_accessed(page);
2005-10-30 09:16:12 +08:00
} else {
page = ZERO_PAGE(0);
2005-10-30 09:16:12 +08:00
page_cache_get(page);
}
/*
* Ok, we have the page, and it's up-to-date, so
* now we can copy it to user space...
*
* The actor routine returns how many bytes were actually used..
* NOTE! This may not be the same as how much of a user buffer
* we filled up (we may be padding etc), so we can only update
* "pos" here (the actor routine has to update the user buffer
* pointers and the remaining count).
*/
ret = actor(desc, page, offset, nr);
offset += ret;
index += offset >> PAGE_CACHE_SHIFT;
offset &= ~PAGE_CACHE_MASK;
page_cache_release(page);
if (ret != nr || !desc->count)
break;
cond_resched();
}
*ppos = ((loff_t) index << PAGE_CACHE_SHIFT) + offset;
file_accessed(filp);
}
static ssize_t shmem_file_read(struct file *filp, char __user *buf, size_t count, loff_t *ppos)
{
read_descriptor_t desc;
if ((ssize_t) count < 0)
return -EINVAL;
if (!access_ok(VERIFY_WRITE, buf, count))
return -EFAULT;
if (!count)
return 0;
desc.written = 0;
desc.count = count;
desc.arg.buf = buf;
desc.error = 0;
do_shmem_file_read(filp, ppos, &desc, file_read_actor);
if (desc.written)
return desc.written;
return desc.error;
}
static int shmem_statfs(struct dentry *dentry, struct kstatfs *buf)
{
struct shmem_sb_info *sbinfo = SHMEM_SB(dentry->d_sb);
buf->f_type = TMPFS_MAGIC;
buf->f_bsize = PAGE_CACHE_SIZE;
buf->f_namelen = NAME_MAX;
spin_lock(&sbinfo->stat_lock);
if (sbinfo->max_blocks) {
buf->f_blocks = sbinfo->max_blocks;
buf->f_bavail = buf->f_bfree = sbinfo->free_blocks;
}
if (sbinfo->max_inodes) {
buf->f_files = sbinfo->max_inodes;
buf->f_ffree = sbinfo->free_inodes;
}
/* else leave those fields 0 like simple_statfs */
spin_unlock(&sbinfo->stat_lock);
return 0;
}
/*
* File creation. Allocate an inode, and we're done..
*/
static int
shmem_mknod(struct inode *dir, struct dentry *dentry, int mode, dev_t dev)
{
struct inode *inode = shmem_get_inode(dir->i_sb, mode, dev);
int error = -ENOSPC;
if (inode) {
error = security_inode_init_security(inode, dir, NULL, NULL,
NULL);
if (error) {
if (error != -EOPNOTSUPP) {
iput(inode);
return error;
}
}
error = shmem_acl_init(inode, dir);
if (error) {
iput(inode);
return error;
}
if (dir->i_mode & S_ISGID) {
inode->i_gid = dir->i_gid;
if (S_ISDIR(mode))
inode->i_mode |= S_ISGID;
}
dir->i_size += BOGO_DIRENT_SIZE;
dir->i_ctime = dir->i_mtime = CURRENT_TIME;
d_instantiate(dentry, inode);
dget(dentry); /* Extra count - pin the dentry in core */
}
return error;
}
static int shmem_mkdir(struct inode *dir, struct dentry *dentry, int mode)
{
int error;
if ((error = shmem_mknod(dir, dentry, mode | S_IFDIR, 0)))
return error;
inc_nlink(dir);
return 0;
}
static int shmem_create(struct inode *dir, struct dentry *dentry, int mode,
struct nameidata *nd)
{
return shmem_mknod(dir, dentry, mode | S_IFREG, 0);
}
/*
* Link a file..
*/
static int shmem_link(struct dentry *old_dentry, struct inode *dir, struct dentry *dentry)
{
struct inode *inode = old_dentry->d_inode;
int ret;
/*
* No ordinary (disk based) filesystem counts links as inodes;
* but each new link needs a new dentry, pinning lowmem, and
* tmpfs dentries cannot be pruned until they are unlinked.
*/
ret = shmem_reserve_inode(inode->i_sb);
if (ret)
goto out;
dir->i_size += BOGO_DIRENT_SIZE;
inode->i_ctime = dir->i_ctime = dir->i_mtime = CURRENT_TIME;
inc_nlink(inode);
atomic_inc(&inode->i_count); /* New dentry reference */
dget(dentry); /* Extra pinning count for the created dentry */
d_instantiate(dentry, inode);
out:
return ret;
}
static int shmem_unlink(struct inode *dir, struct dentry *dentry)
{
struct inode *inode = dentry->d_inode;
if (inode->i_nlink > 1 && !S_ISDIR(inode->i_mode))
shmem_free_inode(inode->i_sb);
dir->i_size -= BOGO_DIRENT_SIZE;
inode->i_ctime = dir->i_ctime = dir->i_mtime = CURRENT_TIME;
drop_nlink(inode);
dput(dentry); /* Undo the count from "create" - this does all the work */
return 0;
}
static int shmem_rmdir(struct inode *dir, struct dentry *dentry)
{
if (!simple_empty(dentry))
return -ENOTEMPTY;
drop_nlink(dentry->d_inode);
drop_nlink(dir);
return shmem_unlink(dir, dentry);
}
/*
* The VFS layer already does all the dentry stuff for rename,
* we just have to decrement the usage count for the target if
* it exists so that the VFS layer correctly free's it when it
* gets overwritten.
*/
static int shmem_rename(struct inode *old_dir, struct dentry *old_dentry, struct inode *new_dir, struct dentry *new_dentry)
{
struct inode *inode = old_dentry->d_inode;
int they_are_dirs = S_ISDIR(inode->i_mode);
if (!simple_empty(new_dentry))
return -ENOTEMPTY;
if (new_dentry->d_inode) {
(void) shmem_unlink(new_dir, new_dentry);
if (they_are_dirs)
drop_nlink(old_dir);
} else if (they_are_dirs) {
drop_nlink(old_dir);
inc_nlink(new_dir);
}
old_dir->i_size -= BOGO_DIRENT_SIZE;
new_dir->i_size += BOGO_DIRENT_SIZE;
old_dir->i_ctime = old_dir->i_mtime =
new_dir->i_ctime = new_dir->i_mtime =
inode->i_ctime = CURRENT_TIME;
return 0;
}
static int shmem_symlink(struct inode *dir, struct dentry *dentry, const char *symname)
{
int error;
int len;
struct inode *inode;
struct page *page = NULL;
char *kaddr;
struct shmem_inode_info *info;
len = strlen(symname) + 1;
if (len > PAGE_CACHE_SIZE)
return -ENAMETOOLONG;
inode = shmem_get_inode(dir->i_sb, S_IFLNK|S_IRWXUGO, 0);
if (!inode)
return -ENOSPC;
error = security_inode_init_security(inode, dir, NULL, NULL,
NULL);
if (error) {
if (error != -EOPNOTSUPP) {
iput(inode);
return error;
}
error = 0;
}
info = SHMEM_I(inode);
inode->i_size = len-1;
if (len <= (char *)inode - (char *)info) {
/* do it inline */
memcpy(info, symname, len);
inode->i_op = &shmem_symlink_inline_operations;
} else {
error = shmem_getpage(inode, 0, &page, SGP_WRITE, NULL);
if (error) {
iput(inode);
return error;
}
unlock_page(page);
inode->i_op = &shmem_symlink_inode_operations;
kaddr = kmap_atomic(page, KM_USER0);
memcpy(kaddr, symname, len);
kunmap_atomic(kaddr, KM_USER0);
set_page_dirty(page);
page_cache_release(page);
}
if (dir->i_mode & S_ISGID)
inode->i_gid = dir->i_gid;
dir->i_size += BOGO_DIRENT_SIZE;
dir->i_ctime = dir->i_mtime = CURRENT_TIME;
d_instantiate(dentry, inode);
dget(dentry);
return 0;
}
static void *shmem_follow_link_inline(struct dentry *dentry, struct nameidata *nd)
{
nd_set_link(nd, (char *)SHMEM_I(dentry->d_inode));
return NULL;
}
static void *shmem_follow_link(struct dentry *dentry, struct nameidata *nd)
{
struct page *page = NULL;
int res = shmem_getpage(dentry->d_inode, 0, &page, SGP_READ, NULL);
nd_set_link(nd, res ? ERR_PTR(res) : kmap(page));
if (page)
unlock_page(page);
return page;
}
static void shmem_put_link(struct dentry *dentry, struct nameidata *nd, void *cookie)
{
if (!IS_ERR(nd_get_link(nd))) {
struct page *page = cookie;
kunmap(page);
mark_page_accessed(page);
page_cache_release(page);
}
}
static const struct inode_operations shmem_symlink_inline_operations = {
.readlink = generic_readlink,
.follow_link = shmem_follow_link_inline,
};
static const struct inode_operations shmem_symlink_inode_operations = {
.truncate = shmem_truncate,
.readlink = generic_readlink,
.follow_link = shmem_follow_link,
.put_link = shmem_put_link,
};
#ifdef CONFIG_TMPFS_POSIX_ACL
/**
* Superblocks without xattr inode operations will get security.* xattr
* support from the VFS "for free". As soon as we have any other xattrs
* like ACLs, we also need to implement the security.* handlers at
* filesystem level, though.
*/
static size_t shmem_xattr_security_list(struct inode *inode, char *list,
size_t list_len, const char *name,
size_t name_len)
{
return security_inode_listsecurity(inode, list, list_len);
}
static int shmem_xattr_security_get(struct inode *inode, const char *name,
void *buffer, size_t size)
{
if (strcmp(name, "") == 0)
return -EINVAL;
return xattr_getsecurity(inode, name, buffer, size);
}
static int shmem_xattr_security_set(struct inode *inode, const char *name,
const void *value, size_t size, int flags)
{
if (strcmp(name, "") == 0)
return -EINVAL;
return security_inode_setsecurity(inode, name, value, size, flags);
}
static struct xattr_handler shmem_xattr_security_handler = {
.prefix = XATTR_SECURITY_PREFIX,
.list = shmem_xattr_security_list,
.get = shmem_xattr_security_get,
.set = shmem_xattr_security_set,
};
static struct xattr_handler *shmem_xattr_handlers[] = {
&shmem_xattr_acl_access_handler,
&shmem_xattr_acl_default_handler,
&shmem_xattr_security_handler,
NULL
};
#endif
[PATCH] knfsd: add nfs-export support to tmpfs We need to encode a decode the 'file' part of a handle. We simply use the inode number and generation number to construct the filehandle. The generation number is the time when the file was created. As inode numbers cycle through the full 32 bits before being reused, there is no real chance of the same inum being allocated to different files in the same second so this is suitably unique. Using time-of-day rather than e.g. jiffies makes it less likely that the same filehandle can be created after a reboot. In order to be able to decode a filehandle we need to be able to lookup by inum, which means that the inode needs to be added to the inode hash table (tmpfs doesn't currently hash inodes as there is never a need to lookup by inum). To avoid overhead when not exporting, we only hash an inode when it is first exported. This requires a lock to ensure it isn't hashed twice. This code is separate from the patch posted in June06 from Atal Shargorodsky which provided the same functionality, but does borrow slightly from it. Locking comment: Most filesystems that hash their inodes do so at the point where the 'struct inode' is initialised, and that has suitable locking (I_NEW). Here in shmem, we are hashing the inode later, the first time we need an NFS file handle for it. We no longer have I_NEW to ensure only one thread tries to add it to the hash table. Cc: Atal Shargorodsky <atal@codefidence.com> Cc: Gilad Ben-Yossef <gilad@codefidence.com> Signed-off-by: David M. Grimes <dgrimes@navisite.com> Signed-off-by: Neil Brown <neilb@suse.de> Acked-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-17 15:09:45 +08:00
static struct dentry *shmem_get_parent(struct dentry *child)
{
return ERR_PTR(-ESTALE);
}
static int shmem_match(struct inode *ino, void *vfh)
{
__u32 *fh = vfh;
__u64 inum = fh[2];
inum = (inum << 32) | fh[1];
return ino->i_ino == inum && fh[0] == ino->i_generation;
}
static struct dentry *shmem_fh_to_dentry(struct super_block *sb,
struct fid *fid, int fh_len, int fh_type)
[PATCH] knfsd: add nfs-export support to tmpfs We need to encode a decode the 'file' part of a handle. We simply use the inode number and generation number to construct the filehandle. The generation number is the time when the file was created. As inode numbers cycle through the full 32 bits before being reused, there is no real chance of the same inum being allocated to different files in the same second so this is suitably unique. Using time-of-day rather than e.g. jiffies makes it less likely that the same filehandle can be created after a reboot. In order to be able to decode a filehandle we need to be able to lookup by inum, which means that the inode needs to be added to the inode hash table (tmpfs doesn't currently hash inodes as there is never a need to lookup by inum). To avoid overhead when not exporting, we only hash an inode when it is first exported. This requires a lock to ensure it isn't hashed twice. This code is separate from the patch posted in June06 from Atal Shargorodsky which provided the same functionality, but does borrow slightly from it. Locking comment: Most filesystems that hash their inodes do so at the point where the 'struct inode' is initialised, and that has suitable locking (I_NEW). Here in shmem, we are hashing the inode later, the first time we need an NFS file handle for it. We no longer have I_NEW to ensure only one thread tries to add it to the hash table. Cc: Atal Shargorodsky <atal@codefidence.com> Cc: Gilad Ben-Yossef <gilad@codefidence.com> Signed-off-by: David M. Grimes <dgrimes@navisite.com> Signed-off-by: Neil Brown <neilb@suse.de> Acked-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-17 15:09:45 +08:00
{
struct inode *inode;
struct dentry *dentry = NULL;
u64 inum = fid->raw[2];
inum = (inum << 32) | fid->raw[1];
if (fh_len < 3)
return NULL;
[PATCH] knfsd: add nfs-export support to tmpfs We need to encode a decode the 'file' part of a handle. We simply use the inode number and generation number to construct the filehandle. The generation number is the time when the file was created. As inode numbers cycle through the full 32 bits before being reused, there is no real chance of the same inum being allocated to different files in the same second so this is suitably unique. Using time-of-day rather than e.g. jiffies makes it less likely that the same filehandle can be created after a reboot. In order to be able to decode a filehandle we need to be able to lookup by inum, which means that the inode needs to be added to the inode hash table (tmpfs doesn't currently hash inodes as there is never a need to lookup by inum). To avoid overhead when not exporting, we only hash an inode when it is first exported. This requires a lock to ensure it isn't hashed twice. This code is separate from the patch posted in June06 from Atal Shargorodsky which provided the same functionality, but does borrow slightly from it. Locking comment: Most filesystems that hash their inodes do so at the point where the 'struct inode' is initialised, and that has suitable locking (I_NEW). Here in shmem, we are hashing the inode later, the first time we need an NFS file handle for it. We no longer have I_NEW to ensure only one thread tries to add it to the hash table. Cc: Atal Shargorodsky <atal@codefidence.com> Cc: Gilad Ben-Yossef <gilad@codefidence.com> Signed-off-by: David M. Grimes <dgrimes@navisite.com> Signed-off-by: Neil Brown <neilb@suse.de> Acked-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-17 15:09:45 +08:00
inode = ilookup5(sb, (unsigned long)(inum + fid->raw[0]),
shmem_match, fid->raw);
[PATCH] knfsd: add nfs-export support to tmpfs We need to encode a decode the 'file' part of a handle. We simply use the inode number and generation number to construct the filehandle. The generation number is the time when the file was created. As inode numbers cycle through the full 32 bits before being reused, there is no real chance of the same inum being allocated to different files in the same second so this is suitably unique. Using time-of-day rather than e.g. jiffies makes it less likely that the same filehandle can be created after a reboot. In order to be able to decode a filehandle we need to be able to lookup by inum, which means that the inode needs to be added to the inode hash table (tmpfs doesn't currently hash inodes as there is never a need to lookup by inum). To avoid overhead when not exporting, we only hash an inode when it is first exported. This requires a lock to ensure it isn't hashed twice. This code is separate from the patch posted in June06 from Atal Shargorodsky which provided the same functionality, but does borrow slightly from it. Locking comment: Most filesystems that hash their inodes do so at the point where the 'struct inode' is initialised, and that has suitable locking (I_NEW). Here in shmem, we are hashing the inode later, the first time we need an NFS file handle for it. We no longer have I_NEW to ensure only one thread tries to add it to the hash table. Cc: Atal Shargorodsky <atal@codefidence.com> Cc: Gilad Ben-Yossef <gilad@codefidence.com> Signed-off-by: David M. Grimes <dgrimes@navisite.com> Signed-off-by: Neil Brown <neilb@suse.de> Acked-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-17 15:09:45 +08:00
if (inode) {
dentry = d_find_alias(inode);
[PATCH] knfsd: add nfs-export support to tmpfs We need to encode a decode the 'file' part of a handle. We simply use the inode number and generation number to construct the filehandle. The generation number is the time when the file was created. As inode numbers cycle through the full 32 bits before being reused, there is no real chance of the same inum being allocated to different files in the same second so this is suitably unique. Using time-of-day rather than e.g. jiffies makes it less likely that the same filehandle can be created after a reboot. In order to be able to decode a filehandle we need to be able to lookup by inum, which means that the inode needs to be added to the inode hash table (tmpfs doesn't currently hash inodes as there is never a need to lookup by inum). To avoid overhead when not exporting, we only hash an inode when it is first exported. This requires a lock to ensure it isn't hashed twice. This code is separate from the patch posted in June06 from Atal Shargorodsky which provided the same functionality, but does borrow slightly from it. Locking comment: Most filesystems that hash their inodes do so at the point where the 'struct inode' is initialised, and that has suitable locking (I_NEW). Here in shmem, we are hashing the inode later, the first time we need an NFS file handle for it. We no longer have I_NEW to ensure only one thread tries to add it to the hash table. Cc: Atal Shargorodsky <atal@codefidence.com> Cc: Gilad Ben-Yossef <gilad@codefidence.com> Signed-off-by: David M. Grimes <dgrimes@navisite.com> Signed-off-by: Neil Brown <neilb@suse.de> Acked-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-17 15:09:45 +08:00
iput(inode);
}
return dentry;
[PATCH] knfsd: add nfs-export support to tmpfs We need to encode a decode the 'file' part of a handle. We simply use the inode number and generation number to construct the filehandle. The generation number is the time when the file was created. As inode numbers cycle through the full 32 bits before being reused, there is no real chance of the same inum being allocated to different files in the same second so this is suitably unique. Using time-of-day rather than e.g. jiffies makes it less likely that the same filehandle can be created after a reboot. In order to be able to decode a filehandle we need to be able to lookup by inum, which means that the inode needs to be added to the inode hash table (tmpfs doesn't currently hash inodes as there is never a need to lookup by inum). To avoid overhead when not exporting, we only hash an inode when it is first exported. This requires a lock to ensure it isn't hashed twice. This code is separate from the patch posted in June06 from Atal Shargorodsky which provided the same functionality, but does borrow slightly from it. Locking comment: Most filesystems that hash their inodes do so at the point where the 'struct inode' is initialised, and that has suitable locking (I_NEW). Here in shmem, we are hashing the inode later, the first time we need an NFS file handle for it. We no longer have I_NEW to ensure only one thread tries to add it to the hash table. Cc: Atal Shargorodsky <atal@codefidence.com> Cc: Gilad Ben-Yossef <gilad@codefidence.com> Signed-off-by: David M. Grimes <dgrimes@navisite.com> Signed-off-by: Neil Brown <neilb@suse.de> Acked-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-17 15:09:45 +08:00
}
static int shmem_encode_fh(struct dentry *dentry, __u32 *fh, int *len,
int connectable)
{
struct inode *inode = dentry->d_inode;
if (*len < 3)
return 255;
if (hlist_unhashed(&inode->i_hash)) {
/* Unfortunately insert_inode_hash is not idempotent,
* so as we hash inodes here rather than at creation
* time, we need a lock to ensure we only try
* to do it once
*/
static DEFINE_SPINLOCK(lock);
spin_lock(&lock);
if (hlist_unhashed(&inode->i_hash))
__insert_inode_hash(inode,
inode->i_ino + inode->i_generation);
spin_unlock(&lock);
}
fh[0] = inode->i_generation;
fh[1] = inode->i_ino;
fh[2] = ((__u64)inode->i_ino) >> 32;
*len = 3;
return 1;
}
static const struct export_operations shmem_export_ops = {
[PATCH] knfsd: add nfs-export support to tmpfs We need to encode a decode the 'file' part of a handle. We simply use the inode number and generation number to construct the filehandle. The generation number is the time when the file was created. As inode numbers cycle through the full 32 bits before being reused, there is no real chance of the same inum being allocated to different files in the same second so this is suitably unique. Using time-of-day rather than e.g. jiffies makes it less likely that the same filehandle can be created after a reboot. In order to be able to decode a filehandle we need to be able to lookup by inum, which means that the inode needs to be added to the inode hash table (tmpfs doesn't currently hash inodes as there is never a need to lookup by inum). To avoid overhead when not exporting, we only hash an inode when it is first exported. This requires a lock to ensure it isn't hashed twice. This code is separate from the patch posted in June06 from Atal Shargorodsky which provided the same functionality, but does borrow slightly from it. Locking comment: Most filesystems that hash their inodes do so at the point where the 'struct inode' is initialised, and that has suitable locking (I_NEW). Here in shmem, we are hashing the inode later, the first time we need an NFS file handle for it. We no longer have I_NEW to ensure only one thread tries to add it to the hash table. Cc: Atal Shargorodsky <atal@codefidence.com> Cc: Gilad Ben-Yossef <gilad@codefidence.com> Signed-off-by: David M. Grimes <dgrimes@navisite.com> Signed-off-by: Neil Brown <neilb@suse.de> Acked-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-17 15:09:45 +08:00
.get_parent = shmem_get_parent,
.encode_fh = shmem_encode_fh,
.fh_to_dentry = shmem_fh_to_dentry,
[PATCH] knfsd: add nfs-export support to tmpfs We need to encode a decode the 'file' part of a handle. We simply use the inode number and generation number to construct the filehandle. The generation number is the time when the file was created. As inode numbers cycle through the full 32 bits before being reused, there is no real chance of the same inum being allocated to different files in the same second so this is suitably unique. Using time-of-day rather than e.g. jiffies makes it less likely that the same filehandle can be created after a reboot. In order to be able to decode a filehandle we need to be able to lookup by inum, which means that the inode needs to be added to the inode hash table (tmpfs doesn't currently hash inodes as there is never a need to lookup by inum). To avoid overhead when not exporting, we only hash an inode when it is first exported. This requires a lock to ensure it isn't hashed twice. This code is separate from the patch posted in June06 from Atal Shargorodsky which provided the same functionality, but does borrow slightly from it. Locking comment: Most filesystems that hash their inodes do so at the point where the 'struct inode' is initialised, and that has suitable locking (I_NEW). Here in shmem, we are hashing the inode later, the first time we need an NFS file handle for it. We no longer have I_NEW to ensure only one thread tries to add it to the hash table. Cc: Atal Shargorodsky <atal@codefidence.com> Cc: Gilad Ben-Yossef <gilad@codefidence.com> Signed-off-by: David M. Grimes <dgrimes@navisite.com> Signed-off-by: Neil Brown <neilb@suse.de> Acked-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-17 15:09:45 +08:00
};
static int shmem_parse_options(char *options, struct shmem_sb_info *sbinfo,
bool remount)
{
char *this_char, *value, *rest;
while (options != NULL) {
this_char = options;
for (;;) {
/*
* NUL-terminate this option: unfortunately,
* mount options form a comma-separated list,
* but mpol's nodelist may also contain commas.
*/
options = strchr(options, ',');
if (options == NULL)
break;
options++;
if (!isdigit(*options)) {
options[-1] = '\0';
break;
}
}
if (!*this_char)
continue;
if ((value = strchr(this_char,'=')) != NULL) {
*value++ = 0;
} else {
printk(KERN_ERR
"tmpfs: No value for mount option '%s'\n",
this_char);
return 1;
}
if (!strcmp(this_char,"size")) {
unsigned long long size;
size = memparse(value,&rest);
if (*rest == '%') {
size <<= PAGE_SHIFT;
size *= totalram_pages;
do_div(size, 100);
rest++;
}
if (*rest)
goto bad_val;
sbinfo->max_blocks =
DIV_ROUND_UP(size, PAGE_CACHE_SIZE);
} else if (!strcmp(this_char,"nr_blocks")) {
sbinfo->max_blocks = memparse(value, &rest);
if (*rest)
goto bad_val;
} else if (!strcmp(this_char,"nr_inodes")) {
sbinfo->max_inodes = memparse(value, &rest);
if (*rest)
goto bad_val;
} else if (!strcmp(this_char,"mode")) {
if (remount)
continue;
sbinfo->mode = simple_strtoul(value, &rest, 8) & 07777;
if (*rest)
goto bad_val;
} else if (!strcmp(this_char,"uid")) {
if (remount)
continue;
sbinfo->uid = simple_strtoul(value, &rest, 0);
if (*rest)
goto bad_val;
} else if (!strcmp(this_char,"gid")) {
if (remount)
continue;
sbinfo->gid = simple_strtoul(value, &rest, 0);
if (*rest)
goto bad_val;
} else if (!strcmp(this_char,"mpol")) {
if (shmem_parse_mpol(value, &sbinfo->policy,
&sbinfo->policy_nodes))
goto bad_val;
} else {
printk(KERN_ERR "tmpfs: Bad mount option %s\n",
this_char);
return 1;
}
}
return 0;
bad_val:
printk(KERN_ERR "tmpfs: Bad value '%s' for mount option '%s'\n",
value, this_char);
return 1;
}
static int shmem_remount_fs(struct super_block *sb, int *flags, char *data)
{
struct shmem_sb_info *sbinfo = SHMEM_SB(sb);
struct shmem_sb_info config = *sbinfo;
unsigned long blocks;
unsigned long inodes;
int error = -EINVAL;
if (shmem_parse_options(data, &config, true))
return error;
spin_lock(&sbinfo->stat_lock);
blocks = sbinfo->max_blocks - sbinfo->free_blocks;
inodes = sbinfo->max_inodes - sbinfo->free_inodes;
if (config.max_blocks < blocks)
goto out;
if (config.max_inodes < inodes)
goto out;
/*
* Those tests also disallow limited->unlimited while any are in
* use, so i_blocks will always be zero when max_blocks is zero;
* but we must separately disallow unlimited->limited, because
* in that case we have no record of how much is already in use.
*/
if (config.max_blocks && !sbinfo->max_blocks)
goto out;
if (config.max_inodes && !sbinfo->max_inodes)
goto out;
error = 0;
sbinfo->max_blocks = config.max_blocks;
sbinfo->free_blocks = config.max_blocks - blocks;
sbinfo->max_inodes = config.max_inodes;
sbinfo->free_inodes = config.max_inodes - inodes;
sbinfo->policy = config.policy;
sbinfo->policy_nodes = config.policy_nodes;
out:
spin_unlock(&sbinfo->stat_lock);
return error;
}
static int shmem_show_options(struct seq_file *seq, struct vfsmount *vfs)
{
struct shmem_sb_info *sbinfo = SHMEM_SB(vfs->mnt_sb);
if (sbinfo->max_blocks != shmem_default_max_blocks())
seq_printf(seq, ",size=%luk",
sbinfo->max_blocks << (PAGE_CACHE_SHIFT - 10));
if (sbinfo->max_inodes != shmem_default_max_inodes())
seq_printf(seq, ",nr_inodes=%lu", sbinfo->max_inodes);
if (sbinfo->mode != (S_IRWXUGO | S_ISVTX))
seq_printf(seq, ",mode=%03o", sbinfo->mode);
if (sbinfo->uid != 0)
seq_printf(seq, ",uid=%u", sbinfo->uid);
if (sbinfo->gid != 0)
seq_printf(seq, ",gid=%u", sbinfo->gid);
shmem_show_mpol(seq, sbinfo->policy, sbinfo->policy_nodes);
return 0;
}
#endif /* CONFIG_TMPFS */
static void shmem_put_super(struct super_block *sb)
{
kfree(sb->s_fs_info);
sb->s_fs_info = NULL;
}
static int shmem_fill_super(struct super_block *sb,
void *data, int silent)
{
struct inode *inode;
struct dentry *root;
struct shmem_sb_info *sbinfo;
int err = -ENOMEM;
/* Round up to L1_CACHE_BYTES to resist false sharing */
sbinfo = kmalloc(max((int)sizeof(struct shmem_sb_info),
L1_CACHE_BYTES), GFP_KERNEL);
if (!sbinfo)
return -ENOMEM;
sbinfo->max_blocks = 0;
sbinfo->max_inodes = 0;
sbinfo->mode = S_IRWXUGO | S_ISVTX;
sbinfo->uid = current->fsuid;
sbinfo->gid = current->fsgid;
sbinfo->policy = MPOL_DEFAULT;
sbinfo->policy_nodes = node_states[N_HIGH_MEMORY];
sb->s_fs_info = sbinfo;
#ifdef CONFIG_TMPFS
/*
* Per default we only allow half of the physical ram per
* tmpfs instance, limiting inodes to one per page of lowmem;
* but the internal instance is left unlimited.
*/
if (!(sb->s_flags & MS_NOUSER)) {
sbinfo->max_blocks = shmem_default_max_blocks();
sbinfo->max_inodes = shmem_default_max_inodes();
if (shmem_parse_options(data, sbinfo, false)) {
err = -EINVAL;
goto failed;
}
}
[PATCH] knfsd: add nfs-export support to tmpfs We need to encode a decode the 'file' part of a handle. We simply use the inode number and generation number to construct the filehandle. The generation number is the time when the file was created. As inode numbers cycle through the full 32 bits before being reused, there is no real chance of the same inum being allocated to different files in the same second so this is suitably unique. Using time-of-day rather than e.g. jiffies makes it less likely that the same filehandle can be created after a reboot. In order to be able to decode a filehandle we need to be able to lookup by inum, which means that the inode needs to be added to the inode hash table (tmpfs doesn't currently hash inodes as there is never a need to lookup by inum). To avoid overhead when not exporting, we only hash an inode when it is first exported. This requires a lock to ensure it isn't hashed twice. This code is separate from the patch posted in June06 from Atal Shargorodsky which provided the same functionality, but does borrow slightly from it. Locking comment: Most filesystems that hash their inodes do so at the point where the 'struct inode' is initialised, and that has suitable locking (I_NEW). Here in shmem, we are hashing the inode later, the first time we need an NFS file handle for it. We no longer have I_NEW to ensure only one thread tries to add it to the hash table. Cc: Atal Shargorodsky <atal@codefidence.com> Cc: Gilad Ben-Yossef <gilad@codefidence.com> Signed-off-by: David M. Grimes <dgrimes@navisite.com> Signed-off-by: Neil Brown <neilb@suse.de> Acked-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-17 15:09:45 +08:00
sb->s_export_op = &shmem_export_ops;
#else
sb->s_flags |= MS_NOUSER;
#endif
spin_lock_init(&sbinfo->stat_lock);
sbinfo->free_blocks = sbinfo->max_blocks;
sbinfo->free_inodes = sbinfo->max_inodes;
sb->s_maxbytes = SHMEM_MAX_BYTES;
sb->s_blocksize = PAGE_CACHE_SIZE;
sb->s_blocksize_bits = PAGE_CACHE_SHIFT;
sb->s_magic = TMPFS_MAGIC;
sb->s_op = &shmem_ops;
sb->s_time_gran = 1;
#ifdef CONFIG_TMPFS_POSIX_ACL
sb->s_xattr = shmem_xattr_handlers;
sb->s_flags |= MS_POSIXACL;
#endif
inode = shmem_get_inode(sb, S_IFDIR | sbinfo->mode, 0);
if (!inode)
goto failed;
inode->i_uid = sbinfo->uid;
inode->i_gid = sbinfo->gid;
root = d_alloc_root(inode);
if (!root)
goto failed_iput;
sb->s_root = root;
return 0;
failed_iput:
iput(inode);
failed:
shmem_put_super(sb);
return err;
}
static struct kmem_cache *shmem_inode_cachep;
static struct inode *shmem_alloc_inode(struct super_block *sb)
{
struct shmem_inode_info *p;
p = (struct shmem_inode_info *)kmem_cache_alloc(shmem_inode_cachep, GFP_KERNEL);
if (!p)
return NULL;
return &p->vfs_inode;
}
static void shmem_destroy_inode(struct inode *inode)
{
if ((inode->i_mode & S_IFMT) == S_IFREG) {
/* only struct inode is valid if it's an inline symlink */
mpol_free_shared_policy(&SHMEM_I(inode)->policy);
}
shmem_acl_destroy_inode(inode);
kmem_cache_free(shmem_inode_cachep, SHMEM_I(inode));
}
static void init_once(struct kmem_cache *cachep, void *foo)
{
struct shmem_inode_info *p = (struct shmem_inode_info *) foo;
inode_init_once(&p->vfs_inode);
#ifdef CONFIG_TMPFS_POSIX_ACL
p->i_acl = NULL;
p->i_default_acl = NULL;
#endif
}
static int init_inodecache(void)
{
shmem_inode_cachep = kmem_cache_create("shmem_inode_cache",
sizeof(struct shmem_inode_info),
0, SLAB_PANIC, init_once);
return 0;
}
static void destroy_inodecache(void)
{
kmem_cache_destroy(shmem_inode_cachep);
}
static const struct address_space_operations shmem_aops = {
.writepage = shmem_writepage,
.set_page_dirty = __set_page_dirty_no_writeback,
#ifdef CONFIG_TMPFS
.readpage = shmem_readpage,
.write_begin = shmem_write_begin,
.write_end = shmem_write_end,
#endif
.migratepage = migrate_page,
};
static const struct file_operations shmem_file_operations = {
.mmap = shmem_mmap,
#ifdef CONFIG_TMPFS
.llseek = generic_file_llseek,
.read = shmem_file_read,
.write = do_sync_write,
.aio_write = generic_file_aio_write,
.fsync = simple_sync_file,
.splice_read = generic_file_splice_read,
.splice_write = generic_file_splice_write,
#endif
};
static const struct inode_operations shmem_inode_operations = {
.truncate = shmem_truncate,
.setattr = shmem_notify_change,
[PATCH] madvise(MADV_REMOVE): remove pages from tmpfs shm backing store Here is the patch to implement madvise(MADV_REMOVE) - which frees up a given range of pages & its associated backing store. Current implementation supports only shmfs/tmpfs and other filesystems return -ENOSYS. "Some app allocates large tmpfs files, then when some task quits and some client disconnect, some memory can be released. However the only way to release tmpfs-swap is to MADV_REMOVE". - Andrea Arcangeli Databases want to use this feature to drop a section of their bufferpool (shared memory segments) - without writing back to disk/swap space. This feature is also useful for supporting hot-plug memory on UML. Concerns raised by Andrew Morton: - "We have no plan for holepunching! If we _do_ have such a plan (or might in the future) then what would the API look like? I think sys_holepunch(fd, start, len), so we should start out with that." - Using madvise is very weird, because people will ask "why do I need to mmap my file before I can stick a hole in it?" - None of the other madvise operations call into the filesystem in this manner. A broad question is: is this capability an MM operation or a filesytem operation? truncate, for example, is a filesystem operation which sometimes has MM side-effects. madvise is an mm operation and with this patch, it gains FS side-effects, only they're really, really significant ones." Comments: - Andrea suggested the fs operation too but then it's more efficient to have it as a mm operation with fs side effects, because they don't immediatly know fd and physical offset of the range. It's possible to fixup in userland and to use the fs operation but it's more expensive, the vmas are already in the kernel and we can use them. Short term plan & Future Direction: - We seem to need this interface only for shmfs/tmpfs files in the short term. We have to add hooks into the filesystem for correctness and completeness. This is what this patch does. - In the future, plan is to support both fs and mmap apis also. This also involves (other) filesystem specific functions to be implemented. - Current patch doesn't support VM_NONLINEAR - which can be addressed in the future. Signed-off-by: Badari Pulavarty <pbadari@us.ibm.com> Cc: Hugh Dickins <hugh@veritas.com> Cc: Andrea Arcangeli <andrea@suse.de> Cc: Michael Kerrisk <mtk-manpages@gmx.net> Cc: Ulrich Drepper <drepper@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-06 16:10:38 +08:00
.truncate_range = shmem_truncate_range,
#ifdef CONFIG_TMPFS_POSIX_ACL
.setxattr = generic_setxattr,
.getxattr = generic_getxattr,
.listxattr = generic_listxattr,
.removexattr = generic_removexattr,
.permission = shmem_permission,
#endif
};
static const struct inode_operations shmem_dir_inode_operations = {
#ifdef CONFIG_TMPFS
.create = shmem_create,
.lookup = simple_lookup,
.link = shmem_link,
.unlink = shmem_unlink,
.symlink = shmem_symlink,
.mkdir = shmem_mkdir,
.rmdir = shmem_rmdir,
.mknod = shmem_mknod,
.rename = shmem_rename,
#endif
#ifdef CONFIG_TMPFS_POSIX_ACL
.setattr = shmem_notify_change,
.setxattr = generic_setxattr,
.getxattr = generic_getxattr,
.listxattr = generic_listxattr,
.removexattr = generic_removexattr,
.permission = shmem_permission,
#endif
};
static const struct inode_operations shmem_special_inode_operations = {
#ifdef CONFIG_TMPFS_POSIX_ACL
.setattr = shmem_notify_change,
.setxattr = generic_setxattr,
.getxattr = generic_getxattr,
.listxattr = generic_listxattr,
.removexattr = generic_removexattr,
.permission = shmem_permission,
#endif
};
static const struct super_operations shmem_ops = {
.alloc_inode = shmem_alloc_inode,
.destroy_inode = shmem_destroy_inode,
#ifdef CONFIG_TMPFS
.statfs = shmem_statfs,
.remount_fs = shmem_remount_fs,
.show_options = shmem_show_options,
#endif
.delete_inode = shmem_delete_inode,
.drop_inode = generic_delete_inode,
.put_super = shmem_put_super,
};
static struct vm_operations_struct shmem_vm_ops = {
mm: merge populate and nopage into fault (fixes nonlinear) Nonlinear mappings are (AFAIKS) simply a virtual memory concept that encodes the virtual address -> file offset differently from linear mappings. ->populate is a layering violation because the filesystem/pagecache code should need to know anything about the virtual memory mapping. The hitch here is that the ->nopage handler didn't pass down enough information (ie. pgoff). But it is more logical to pass pgoff rather than have the ->nopage function calculate it itself anyway (because that's a similar layering violation). Having the populate handler install the pte itself is likewise a nasty thing to be doing. This patch introduces a new fault handler that replaces ->nopage and ->populate and (later) ->nopfn. Most of the old mechanism is still in place so there is a lot of duplication and nice cleanups that can be removed if everyone switches over. The rationale for doing this in the first place is that nonlinear mappings are subject to the pagefault vs invalidate/truncate race too, and it seemed stupid to duplicate the synchronisation logic rather than just consolidate the two. After this patch, MAP_NONBLOCK no longer sets up ptes for pages present in pagecache. Seems like a fringe functionality anyway. NOPAGE_REFAULT is removed. This should be implemented with ->fault, and no users have hit mainline yet. [akpm@linux-foundation.org: cleanup] [randy.dunlap@oracle.com: doc. fixes for readahead] [akpm@linux-foundation.org: build fix] Signed-off-by: Nick Piggin <npiggin@suse.de> Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Cc: Mark Fasheh <mark.fasheh@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-19 16:46:59 +08:00
.fault = shmem_fault,
#ifdef CONFIG_NUMA
.set_policy = shmem_set_policy,
.get_policy = shmem_get_policy,
#endif
};
[PATCH] VFS: Permit filesystem to override root dentry on mount Extend the get_sb() filesystem operation to take an extra argument that permits the VFS to pass in the target vfsmount that defines the mountpoint. The filesystem is then required to manually set the superblock and root dentry pointers. For most filesystems, this should be done with simple_set_mnt() which will set the superblock pointer and then set the root dentry to the superblock's s_root (as per the old default behaviour). The get_sb() op now returns an integer as there's now no need to return the superblock pointer. This patch permits a superblock to be implicitly shared amongst several mount points, such as can be done with NFS to avoid potential inode aliasing. In such a case, simple_set_mnt() would not be called, and instead the mnt_root and mnt_sb would be set directly. The patch also makes the following changes: (*) the get_sb_*() convenience functions in the core kernel now take a vfsmount pointer argument and return an integer, so most filesystems have to change very little. (*) If one of the convenience function is not used, then get_sb() should normally call simple_set_mnt() to instantiate the vfsmount. This will always return 0, and so can be tail-called from get_sb(). (*) generic_shutdown_super() now calls shrink_dcache_sb() to clean up the dcache upon superblock destruction rather than shrink_dcache_anon(). This is required because the superblock may now have multiple trees that aren't actually bound to s_root, but that still need to be cleaned up. The currently called functions assume that the whole tree is rooted at s_root, and that anonymous dentries are not the roots of trees which results in dentries being left unculled. However, with the way NFS superblock sharing are currently set to be implemented, these assumptions are violated: the root of the filesystem is simply a dummy dentry and inode (the real inode for '/' may well be inaccessible), and all the vfsmounts are rooted on anonymous[*] dentries with child trees. [*] Anonymous until discovered from another tree. (*) The documentation has been adjusted, including the additional bit of changing ext2_* into foo_* in the documentation. [akpm@osdl.org: convert ipath_fs, do other stuff] Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: Al Viro <viro@zeniv.linux.org.uk> Cc: Nathan Scott <nathans@sgi.com> Cc: Roland Dreier <rolandd@cisco.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-23 17:02:57 +08:00
static int shmem_get_sb(struct file_system_type *fs_type,
int flags, const char *dev_name, void *data, struct vfsmount *mnt)
{
[PATCH] VFS: Permit filesystem to override root dentry on mount Extend the get_sb() filesystem operation to take an extra argument that permits the VFS to pass in the target vfsmount that defines the mountpoint. The filesystem is then required to manually set the superblock and root dentry pointers. For most filesystems, this should be done with simple_set_mnt() which will set the superblock pointer and then set the root dentry to the superblock's s_root (as per the old default behaviour). The get_sb() op now returns an integer as there's now no need to return the superblock pointer. This patch permits a superblock to be implicitly shared amongst several mount points, such as can be done with NFS to avoid potential inode aliasing. In such a case, simple_set_mnt() would not be called, and instead the mnt_root and mnt_sb would be set directly. The patch also makes the following changes: (*) the get_sb_*() convenience functions in the core kernel now take a vfsmount pointer argument and return an integer, so most filesystems have to change very little. (*) If one of the convenience function is not used, then get_sb() should normally call simple_set_mnt() to instantiate the vfsmount. This will always return 0, and so can be tail-called from get_sb(). (*) generic_shutdown_super() now calls shrink_dcache_sb() to clean up the dcache upon superblock destruction rather than shrink_dcache_anon(). This is required because the superblock may now have multiple trees that aren't actually bound to s_root, but that still need to be cleaned up. The currently called functions assume that the whole tree is rooted at s_root, and that anonymous dentries are not the roots of trees which results in dentries being left unculled. However, with the way NFS superblock sharing are currently set to be implemented, these assumptions are violated: the root of the filesystem is simply a dummy dentry and inode (the real inode for '/' may well be inaccessible), and all the vfsmounts are rooted on anonymous[*] dentries with child trees. [*] Anonymous until discovered from another tree. (*) The documentation has been adjusted, including the additional bit of changing ext2_* into foo_* in the documentation. [akpm@osdl.org: convert ipath_fs, do other stuff] Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: Al Viro <viro@zeniv.linux.org.uk> Cc: Nathan Scott <nathans@sgi.com> Cc: Roland Dreier <rolandd@cisco.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-23 17:02:57 +08:00
return get_sb_nodev(fs_type, flags, data, shmem_fill_super, mnt);
}
static struct file_system_type tmpfs_fs_type = {
.owner = THIS_MODULE,
.name = "tmpfs",
.get_sb = shmem_get_sb,
.kill_sb = kill_litter_super,
};
static struct vfsmount *shm_mnt;
static int __init init_tmpfs(void)
{
int error;
error = bdi_init(&shmem_backing_dev_info);
if (error)
goto out4;
error = init_inodecache();
if (error)
goto out3;
error = register_filesystem(&tmpfs_fs_type);
if (error) {
printk(KERN_ERR "Could not register tmpfs\n");
goto out2;
}
shm_mnt = vfs_kern_mount(&tmpfs_fs_type, MS_NOUSER,
tmpfs_fs_type.name, NULL);
if (IS_ERR(shm_mnt)) {
error = PTR_ERR(shm_mnt);
printk(KERN_ERR "Could not kern_mount tmpfs\n");
goto out1;
}
return 0;
out1:
unregister_filesystem(&tmpfs_fs_type);
out2:
destroy_inodecache();
out3:
bdi_destroy(&shmem_backing_dev_info);
out4:
shm_mnt = ERR_PTR(error);
return error;
}
module_init(init_tmpfs)
/*
* shmem_file_setup - get an unlinked file living in tmpfs
*
* @name: name for dentry (to be seen in /proc/<pid>/maps
* @size: size to be set for the file
*
*/
struct file *shmem_file_setup(char *name, loff_t size, unsigned long flags)
{
int error;
struct file *file;
struct inode *inode;
struct dentry *dentry, *root;
struct qstr this;
if (IS_ERR(shm_mnt))
return (void *)shm_mnt;
if (size < 0 || size > SHMEM_MAX_BYTES)
return ERR_PTR(-EINVAL);
if (shmem_acct_size(flags, size))
return ERR_PTR(-ENOMEM);
error = -ENOMEM;
this.name = name;
this.len = strlen(name);
this.hash = 0; /* will go */
root = shm_mnt->mnt_root;
dentry = d_alloc(root, &this);
if (!dentry)
goto put_memory;
error = -ENFILE;
file = get_empty_filp();
if (!file)
goto put_dentry;
error = -ENOSPC;
inode = shmem_get_inode(root->d_sb, S_IFREG | S_IRWXUGO, 0);
if (!inode)
goto close_file;
SHMEM_I(inode)->flags = flags & VM_ACCOUNT;
d_instantiate(dentry, inode);
inode->i_size = size;
inode->i_nlink = 0; /* It is unlinked */
r/o bind mounts: filesystem helpers for custom 'struct file's Why do we need r/o bind mounts? This feature allows a read-only view into a read-write filesystem. In the process of doing that, it also provides infrastructure for keeping track of the number of writers to any given mount. This has a number of uses. It allows chroots to have parts of filesystems writable. It will be useful for containers in the future because users may have root inside a container, but should not be allowed to write to somefilesystems. This also replaces patches that vserver has had out of the tree for several years. It allows security enhancement by making sure that parts of your filesystem read-only (such as when you don't trust your FTP server), when you don't want to have entire new filesystems mounted, or when you want atime selectively updated. I've been using the following script to test that the feature is working as desired. It takes a directory and makes a regular bind and a r/o bind mount of it. It then performs some normal filesystem operations on the three directories, including ones that are expected to fail, like creating a file on the r/o mount. This patch: Some filesystems forego the vfs and may_open() and create their own 'struct file's. This patch creates a couple of helper functions which can be used by these filesystems, and will provide a unified place which the r/o bind mount code may patch. Also, rename an existing, static-scope init_file() to a less generic name. Signed-off-by: Dave Hansen <haveblue@us.ibm.com> Cc: Christoph Hellwig <hch@lst.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-17 14:31:13 +08:00
init_file(file, shm_mnt, dentry, FMODE_WRITE | FMODE_READ,
&shmem_file_operations);
return file;
close_file:
put_filp(file);
put_dentry:
dput(dentry);
put_memory:
shmem_unacct_size(flags, size);
return ERR_PTR(error);
}
/*
* shmem_zero_setup - setup a shared anonymous mapping
*
* @vma: the vma to be mmapped is prepared by do_mmap_pgoff
*/
int shmem_zero_setup(struct vm_area_struct *vma)
{
struct file *file;
loff_t size = vma->vm_end - vma->vm_start;
file = shmem_file_setup("dev/zero", size, vma->vm_flags);
if (IS_ERR(file))
return PTR_ERR(file);
if (vma->vm_file)
fput(vma->vm_file);
vma->vm_file = file;
vma->vm_ops = &shmem_vm_ops;
return 0;
}