UbiquitousOS
/
OpenCloudOS-Kernel
mirror of https://gitee.com/OpenCloudOS/OpenCloudOS-Kernel.git
11
0
Fork 0
Code Issues Projects Releases Wiki Activity
OpenCloudOS-Kernel/drivers/clk/meson/gxbb.h

278 lines
11 KiB
C
Raw Normal View History

clk: gxbb: add AmLogic GXBB clk controller driver The gxbb clock controller is the primary clock generation unit for the AmLogic GXBB SoC. It is clocked by a fixed 24MHz xtal, contains several PLLs and the usual post-dividers, muxes, dividers and leaf gates that are fed into various IP blocks in the SoC. Tested-by: Kevin Hilman <khilman@baylibre.com> Signed-off-by: Michael Turquette <mturquette@baylibre.com>
2016-05-24 06:44:26 +08:00
/*
* This file is provided under a dual BSD/GPLv2 license. When using or
* redistributing this file, you may do so under either license.
*
* GPL LICENSE SUMMARY
*
* Copyright (c) 2016 AmLogic, Inc.
* Author: Michael Turquette <mturquette@baylibre.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of version 2 of the GNU General Public License as
* published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
* The full GNU General Public License is included in this distribution
* in the file called COPYING
*
* BSD LICENSE
*
* Copyright (c) 2016 BayLibre, Inc.
* Author: Michael Turquette <mturquette@baylibre.com>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* * Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* * Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* * Neither the name of Intel Corporation nor the names of its
* contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
#ifndef __GXBB_H
#define __GXBB_H
/*
* Clock controller register offsets
*
* Register offsets from the data sheet are listed in comment blocks below.
* Those offsets must be multiplied by 4 before adding them to the base address
* to get the right value
*/
#define SCR 0x2C /* 0x0b offset in data sheet */
#define TIMEOUT_VALUE 0x3c /* 0x0f offset in data sheet */
#define HHI_GP0_PLL_CNTL 0x40 /* 0x10 offset in data sheet */
#define HHI_GP0_PLL_CNTL2 0x44 /* 0x11 offset in data sheet */
#define HHI_GP0_PLL_CNTL3 0x48 /* 0x12 offset in data sheet */
#define HHI_GP0_PLL_CNTL4 0x4c /* 0x13 offset in data sheet */
#define HHI_XTAL_DIVN_CNTL 0xbc /* 0x2f offset in data sheet */
#define HHI_TIMER90K 0xec /* 0x3b offset in data sheet */
#define HHI_MEM_PD_REG0 0x100 /* 0x40 offset in data sheet */
#define HHI_MEM_PD_REG1 0x104 /* 0x41 offset in data sheet */
#define HHI_VPU_MEM_PD_REG1 0x108 /* 0x42 offset in data sheet */
#define HHI_VIID_CLK_DIV 0x128 /* 0x4a offset in data sheet */
#define HHI_VIID_CLK_CNTL 0x12c /* 0x4b offset in data sheet */
#define HHI_GCLK_MPEG0 0x140 /* 0x50 offset in data sheet */
#define HHI_GCLK_MPEG1 0x144 /* 0x51 offset in data sheet */
#define HHI_GCLK_MPEG2 0x148 /* 0x52 offset in data sheet */
#define HHI_GCLK_OTHER 0x150 /* 0x54 offset in data sheet */
#define HHI_GCLK_AO 0x154 /* 0x55 offset in data sheet */
#define HHI_SYS_OSCIN_CNTL 0x158 /* 0x56 offset in data sheet */
#define HHI_SYS_CPU_CLK_CNTL1 0x15c /* 0x57 offset in data sheet */
#define HHI_SYS_CPU_RESET_CNTL 0x160 /* 0x58 offset in data sheet */
#define HHI_VID_CLK_DIV 0x164 /* 0x59 offset in data sheet */
#define HHI_MPEG_CLK_CNTL 0x174 /* 0x5d offset in data sheet */
#define HHI_AUD_CLK_CNTL 0x178 /* 0x5e offset in data sheet */
#define HHI_VID_CLK_CNTL 0x17c /* 0x5f offset in data sheet */
#define HHI_AUD_CLK_CNTL2 0x190 /* 0x64 offset in data sheet */
#define HHI_VID_CLK_CNTL2 0x194 /* 0x65 offset in data sheet */
#define HHI_SYS_CPU_CLK_CNTL0 0x19c /* 0x67 offset in data sheet */
#define HHI_VID_PLL_CLK_DIV 0x1a0 /* 0x68 offset in data sheet */
#define HHI_AUD_CLK_CNTL3 0x1a4 /* 0x69 offset in data sheet */
#define HHI_MALI_CLK_CNTL 0x1b0 /* 0x6c offset in data sheet */
#define HHI_VPU_CLK_CNTL 0x1bC /* 0x6f offset in data sheet */
#define HHI_HDMI_CLK_CNTL 0x1CC /* 0x73 offset in data sheet */
#define HHI_VDEC_CLK_CNTL 0x1E0 /* 0x78 offset in data sheet */
#define HHI_VDEC2_CLK_CNTL 0x1E4 /* 0x79 offset in data sheet */
#define HHI_VDEC3_CLK_CNTL 0x1E8 /* 0x7a offset in data sheet */
#define HHI_VDEC4_CLK_CNTL 0x1EC /* 0x7b offset in data sheet */
#define HHI_HDCP22_CLK_CNTL 0x1F0 /* 0x7c offset in data sheet */
#define HHI_VAPBCLK_CNTL 0x1F4 /* 0x7d offset in data sheet */
#define HHI_VPU_CLKB_CNTL 0x20C /* 0x83 offset in data sheet */
#define HHI_USB_CLK_CNTL 0x220 /* 0x88 offset in data sheet */
#define HHI_32K_CLK_CNTL 0x224 /* 0x89 offset in data sheet */
#define HHI_GEN_CLK_CNTL 0x228 /* 0x8a offset in data sheet */
#define HHI_GEN_CLK_CNTL 0x228 /* 0x8a offset in data sheet */
#define HHI_PCM_CLK_CNTL 0x258 /* 0x96 offset in data sheet */
#define HHI_NAND_CLK_CNTL 0x25C /* 0x97 offset in data sheet */
#define HHI_SD_EMMC_CLK_CNTL 0x264 /* 0x99 offset in data sheet */
#define HHI_MPLL_CNTL 0x280 /* 0xa0 offset in data sheet */
#define HHI_MPLL_CNTL2 0x284 /* 0xa1 offset in data sheet */
#define HHI_MPLL_CNTL3 0x288 /* 0xa2 offset in data sheet */
#define HHI_MPLL_CNTL4 0x28C /* 0xa3 offset in data sheet */
#define HHI_MPLL_CNTL5 0x290 /* 0xa4 offset in data sheet */
#define HHI_MPLL_CNTL6 0x294 /* 0xa5 offset in data sheet */
#define HHI_MPLL_CNTL7 0x298 /* MP0, 0xa6 offset in data sheet */
#define HHI_MPLL_CNTL8 0x29C /* MP1, 0xa7 offset in data sheet */
#define HHI_MPLL_CNTL9 0x2A0 /* MP2, 0xa8 offset in data sheet */
#define HHI_MPLL_CNTL10 0x2A4 /* MP2, 0xa9 offset in data sheet */
#define HHI_MPLL3_CNTL0 0x2E0 /* 0xb8 offset in data sheet */
#define HHI_MPLL3_CNTL1 0x2E4 /* 0xb9 offset in data sheet */
#define HHI_VDAC_CNTL0 0x2F4 /* 0xbd offset in data sheet */
#define HHI_VDAC_CNTL1 0x2F8 /* 0xbe offset in data sheet */
#define HHI_SYS_PLL_CNTL 0x300 /* 0xc0 offset in data sheet */
#define HHI_SYS_PLL_CNTL2 0x304 /* 0xc1 offset in data sheet */
#define HHI_SYS_PLL_CNTL3 0x308 /* 0xc2 offset in data sheet */
#define HHI_SYS_PLL_CNTL4 0x30c /* 0xc3 offset in data sheet */
#define HHI_SYS_PLL_CNTL5 0x310 /* 0xc4 offset in data sheet */
#define HHI_DPLL_TOP_I 0x318 /* 0xc6 offset in data sheet */
#define HHI_DPLL_TOP2_I 0x31C /* 0xc7 offset in data sheet */
#define HHI_HDMI_PLL_CNTL 0x320 /* 0xc8 offset in data sheet */
#define HHI_HDMI_PLL_CNTL2 0x324 /* 0xc9 offset in data sheet */
#define HHI_HDMI_PLL_CNTL3 0x328 /* 0xca offset in data sheet */
#define HHI_HDMI_PLL_CNTL4 0x32C /* 0xcb offset in data sheet */
#define HHI_HDMI_PLL_CNTL5 0x330 /* 0xcc offset in data sheet */
#define HHI_HDMI_PLL_CNTL6 0x334 /* 0xcd offset in data sheet */
#define HHI_HDMI_PLL_CNTL_I 0x338 /* 0xce offset in data sheet */
#define HHI_HDMI_PLL_CNTL7 0x33C /* 0xcf offset in data sheet */
#define HHI_HDMI_PHY_CNTL0 0x3A0 /* 0xe8 offset in data sheet */
#define HHI_HDMI_PHY_CNTL1 0x3A4 /* 0xe9 offset in data sheet */
#define HHI_HDMI_PHY_CNTL2 0x3A8 /* 0xea offset in data sheet */
#define HHI_HDMI_PHY_CNTL3 0x3AC /* 0xeb offset in data sheet */
#define HHI_VID_LOCK_CLK_CNTL 0x3C8 /* 0xf2 offset in data sheet */
#define HHI_BT656_CLK_CNTL 0x3D4 /* 0xf5 offset in data sheet */
#define HHI_SAR_CLK_CNTL 0x3D8 /* 0xf6 offset in data sheet */
/*
* CLKID index values
*
* These indices are entirely contrived and do not map onto the hardware.
* Migrate them out of this header and into the DT header file when they need
* to be exposed to client nodes in DT: include/dt-bindings/clock/gxbb-clkc.h
*/
#define CLKID_SYS_PLL 0
/* CLKID_CPUCLK */
clk: meson-gxbb: Export PWM related clocks for DT Add the PWM related clocks in order to be referenced as PWM source clocks. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Michael Turquette <mturquette@baylibre.com> Link: lkml.kernel.org/r/1471870177-10609-1-git-send-email-narmstrong@baylibre.com
2016-08-22 20:49:37 +08:00
/* CLKID_HDMI_PLL */
clk: gxbb: add AmLogic GXBB clk controller driver The gxbb clock controller is the primary clock generation unit for the AmLogic GXBB SoC. It is clocked by a fixed 24MHz xtal, contains several PLLs and the usual post-dividers, muxes, dividers and leaf gates that are fed into various IP blocks in the SoC. Tested-by: Kevin Hilman <khilman@baylibre.com> Signed-off-by: Michael Turquette <mturquette@baylibre.com>
2016-05-24 06:44:26 +08:00
#define CLKID_FIXED_PLL 3
clk: gxbb: add MMC gate clocks, and expose for DT Add the SD/eMMC gate clocks and expose them for use by DT. While at it, also explose FCLK_DIV2 since this is one of the input clocks to the mux internal to each of the SD/eMMC blocks. Signed-off-by: Kevin Hilman <khilman@baylibre.com> Tested-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-08-03 05:40:11 +08:00
/* CLKID_FCLK_DIV2 */
clk: meson-gxbb: Export PWM related clocks for DT Add the PWM related clocks in order to be referenced as PWM source clocks. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Michael Turquette <mturquette@baylibre.com> Link: lkml.kernel.org/r/1471870177-10609-1-git-send-email-narmstrong@baylibre.com
2016-08-22 20:49:37 +08:00
/* CLKID_FCLK_DIV3 */
/* CLKID_FCLK_DIV4 */
clk: gxbb: add AmLogic GXBB clk controller driver The gxbb clock controller is the primary clock generation unit for the AmLogic GXBB SoC. It is clocked by a fixed 24MHz xtal, contains several PLLs and the usual post-dividers, muxes, dividers and leaf gates that are fed into various IP blocks in the SoC. Tested-by: Kevin Hilman <khilman@baylibre.com> Signed-off-by: Michael Turquette <mturquette@baylibre.com>
2016-05-24 06:44:26 +08:00
#define CLKID_FCLK_DIV5 7
#define CLKID_FCLK_DIV7 8
#define CLKID_GP0_PLL 9
#define CLKID_MPEG_SEL 10
#define CLKID_MPEG_DIV 11
/* CLKID_CLK81 */
#define CLKID_MPLL0 13
#define CLKID_MPLL1 14
clk: gxbb: expose MPLL2 clock for use by DT This exposes the MPLL2 clock as this is one of the input clocks of the ethernet controller's internal mux. Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Acked-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2016-09-07 05:38:44 +08:00
/* CLKID_MPLL2 */
clk: gxbb: add AmLogic GXBB clk controller driver The gxbb clock controller is the primary clock generation unit for the AmLogic GXBB SoC. It is clocked by a fixed 24MHz xtal, contains several PLLs and the usual post-dividers, muxes, dividers and leaf gates that are fed into various IP blocks in the SoC. Tested-by: Kevin Hilman <khilman@baylibre.com> Signed-off-by: Michael Turquette <mturquette@baylibre.com>
2016-05-24 06:44:26 +08:00
#define CLKID_DDR 16
#define CLKID_DOS 17
#define CLKID_ISA 18
#define CLKID_PL301 19
#define CLKID_PERIPHS 20
#define CLKID_SPICC 21
clk: gxbb: expose i2c clocks I2C and AO_I2C clocks are needed for the i2c driver, expose to DT (and comment out in clk driver) Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Acked-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2016-09-14 18:06:05 +08:00
/* CLKID_I2C */
clk: gxbb: add the SAR ADC clocks and expose them The HHI_SAR_CLK_CNTL contains three SAR ADC specific clocks: - a mux clock to choose between different ADC reference clocks (this is 2-bit wide, but the datasheet only lists the parents for the first bit) - a divider for the input/reference clock - a gate which enables the ADC clock Additionally this exposes the ADC core clock (CLKID_SAR_ADC) and CLKID_SANA (which seems to enable the analog inputs, but unfortunately there is no documentation for this - we just mimic what the vendor driver does). Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Tested-by: Neil Armstrong <narmstrong@baylibre.com> Acked-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2017-01-19 22:58:20 +08:00
/* #define CLKID_SAR_ADC */
clk: gxbb: add AmLogic GXBB clk controller driver The gxbb clock controller is the primary clock generation unit for the AmLogic GXBB SoC. It is clocked by a fixed 24MHz xtal, contains several PLLs and the usual post-dividers, muxes, dividers and leaf gates that are fed into various IP blocks in the SoC. Tested-by: Kevin Hilman <khilman@baylibre.com> Signed-off-by: Michael Turquette <mturquette@baylibre.com>
2016-05-24 06:44:26 +08:00
#define CLKID_SMART_CARD 24
#define CLKID_RNG0 25
#define CLKID_UART0 26
#define CLKID_SDHC 27
#define CLKID_STREAM 28
#define CLKID_ASYNC_FIFO 29
#define CLKID_SDIO 30
#define CLKID_ABUF 31
#define CLKID_HIU_IFACE 32
#define CLKID_ASSIST_MISC 33
clk: gxbb: expose spifc clock SPI clock is needed for the spifc driver, expose to DT (and comment out in the clk driver) Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Acked-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2016-09-07 23:13:39 +08:00
/* CLKID_SPI */
clk: gxbb: add AmLogic GXBB clk controller driver The gxbb clock controller is the primary clock generation unit for the AmLogic GXBB SoC. It is clocked by a fixed 24MHz xtal, contains several PLLs and the usual post-dividers, muxes, dividers and leaf gates that are fed into various IP blocks in the SoC. Tested-by: Kevin Hilman <khilman@baylibre.com> Signed-off-by: Michael Turquette <mturquette@baylibre.com>
2016-05-24 06:44:26 +08:00
#define CLKID_I2S_SPDIF 35
clk: gxbb: fix CLKID_ETH defined twice CLKID_ETH is define in the dt-bindings but has not be commented out in the clock driver. Just do it now. Fixes: 738f66d3211d ("clk: gxbb: add AmLogic GXBB clk controller driver") Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Acked-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2017-01-27 00:05:49 +08:00
/* CLKID_ETH */
clk: gxbb: add AmLogic GXBB clk controller driver The gxbb clock controller is the primary clock generation unit for the AmLogic GXBB SoC. It is clocked by a fixed 24MHz xtal, contains several PLLs and the usual post-dividers, muxes, dividers and leaf gates that are fed into various IP blocks in the SoC. Tested-by: Kevin Hilman <khilman@baylibre.com> Signed-off-by: Michael Turquette <mturquette@baylibre.com>
2016-05-24 06:44:26 +08:00
#define CLKID_DEMUX 37
#define CLKID_AIU_GLUE 38
#define CLKID_IEC958 39
#define CLKID_I2S_OUT 40
#define CLKID_AMCLK 41
#define CLKID_AIFIFO2 42
#define CLKID_MIXER 43
#define CLKID_MIXER_IFACE 44
#define CLKID_ADC 45
#define CLKID_BLKMV 46
#define CLKID_AIU 47
#define CLKID_UART1 48
#define CLKID_G2D 49
clk: gxbb: expose USB clocks USB0_DDR_BRIDGE and USB1_DDR_BRIDGE1 are needed for the related dwc2 usb controller. USB, USB0 and USB1 are needed for the PHYs. Expose these clocks to DT and comment out in clk driver. Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Acked-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2016-09-05 05:31:46 +08:00
/* CLKID_USB0 */
/* CLKID_USB1 */
clk: gxbb: add AmLogic GXBB clk controller driver The gxbb clock controller is the primary clock generation unit for the AmLogic GXBB SoC. It is clocked by a fixed 24MHz xtal, contains several PLLs and the usual post-dividers, muxes, dividers and leaf gates that are fed into various IP blocks in the SoC. Tested-by: Kevin Hilman <khilman@baylibre.com> Signed-off-by: Michael Turquette <mturquette@baylibre.com>
2016-05-24 06:44:26 +08:00
#define CLKID_RESET 52
#define CLKID_NAND 53
#define CLKID_DOS_PARSER 54
clk: gxbb: expose USB clocks USB0_DDR_BRIDGE and USB1_DDR_BRIDGE1 are needed for the related dwc2 usb controller. USB, USB0 and USB1 are needed for the PHYs. Expose these clocks to DT and comment out in clk driver. Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Acked-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2016-09-05 05:31:46 +08:00
/* CLKID_USB */
clk: gxbb: add AmLogic GXBB clk controller driver The gxbb clock controller is the primary clock generation unit for the AmLogic GXBB SoC. It is clocked by a fixed 24MHz xtal, contains several PLLs and the usual post-dividers, muxes, dividers and leaf gates that are fed into various IP blocks in the SoC. Tested-by: Kevin Hilman <khilman@baylibre.com> Signed-off-by: Michael Turquette <mturquette@baylibre.com>
2016-05-24 06:44:26 +08:00
#define CLKID_VDIN1 56
#define CLKID_AHB_ARB0 57
#define CLKID_EFUSE 58
#define CLKID_BOOT_ROM 59
#define CLKID_AHB_DATA_BUS 60
#define CLKID_AHB_CTRL_BUS 61
#define CLKID_HDMI_INTR_SYNC 62
clk: meson-gxbb: Export HDMI clocks Export HDMI clock from internal to dt-bindings. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Acked-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2017-01-17 20:08:48 +08:00
/* CLKID_HDMI_PCLK */
clk: gxbb: expose USB clocks USB0_DDR_BRIDGE and USB1_DDR_BRIDGE1 are needed for the related dwc2 usb controller. USB, USB0 and USB1 are needed for the PHYs. Expose these clocks to DT and comment out in clk driver. Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Acked-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2016-09-05 05:31:46 +08:00
/* CLKID_USB1_DDR_BRIDGE */
/* CLKID_USB0_DDR_BRIDGE */
Revert "clk: gxbb: expose CLKID_MMC_PCLK" This reverts commit e16fb2e6355c1c1b41623af9e01ada196e2af098. Updated documentation from the chip vendor reveals that this clock is not required for correct operation of the MMC controller. As such, do not expose it to DT. Signed-off-by: Michael Turquette <mturquette@baylibre.com>
2016-07-16 10:13:36 +08:00
#define CLKID_MMC_PCLK 66
clk: gxbb: add AmLogic GXBB clk controller driver The gxbb clock controller is the primary clock generation unit for the AmLogic GXBB SoC. It is clocked by a fixed 24MHz xtal, contains several PLLs and the usual post-dividers, muxes, dividers and leaf gates that are fed into various IP blocks in the SoC. Tested-by: Kevin Hilman <khilman@baylibre.com> Signed-off-by: Michael Turquette <mturquette@baylibre.com>
2016-05-24 06:44:26 +08:00
#define CLKID_DVIN 67
#define CLKID_UART2 68
clk: gxbb: add the SAR ADC clocks and expose them The HHI_SAR_CLK_CNTL contains three SAR ADC specific clocks: - a mux clock to choose between different ADC reference clocks (this is 2-bit wide, but the datasheet only lists the parents for the first bit) - a divider for the input/reference clock - a gate which enables the ADC clock Additionally this exposes the ADC core clock (CLKID_SAR_ADC) and CLKID_SANA (which seems to enable the analog inputs, but unfortunately there is no documentation for this - we just mimic what the vendor driver does). Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Tested-by: Neil Armstrong <narmstrong@baylibre.com> Acked-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2017-01-19 22:58:20 +08:00
/* #define CLKID_SANA */
clk: gxbb: add AmLogic GXBB clk controller driver The gxbb clock controller is the primary clock generation unit for the AmLogic GXBB SoC. It is clocked by a fixed 24MHz xtal, contains several PLLs and the usual post-dividers, muxes, dividers and leaf gates that are fed into various IP blocks in the SoC. Tested-by: Kevin Hilman <khilman@baylibre.com> Signed-off-by: Michael Turquette <mturquette@baylibre.com>
2016-05-24 06:44:26 +08:00
#define CLKID_VPU_INTR 70
#define CLKID_SEC_AHB_AHB3_BRIDGE 71
#define CLKID_CLK81_A53 72
#define CLKID_VCLK2_VENCI0 73
#define CLKID_VCLK2_VENCI1 74
#define CLKID_VCLK2_VENCP0 75
#define CLKID_VCLK2_VENCP1 76
clk: meson-gxbb: Export HDMI clocks Export HDMI clock from internal to dt-bindings. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Acked-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2017-01-17 20:08:48 +08:00
/* CLKID_GCLK_VENCI_INT0 */
clk: gxbb: add AmLogic GXBB clk controller driver The gxbb clock controller is the primary clock generation unit for the AmLogic GXBB SoC. It is clocked by a fixed 24MHz xtal, contains several PLLs and the usual post-dividers, muxes, dividers and leaf gates that are fed into various IP blocks in the SoC. Tested-by: Kevin Hilman <khilman@baylibre.com> Signed-off-by: Michael Turquette <mturquette@baylibre.com>
2016-05-24 06:44:26 +08:00
#define CLKID_GCLK_VENCI_INT 78
#define CLKID_DAC_CLK 79
#define CLKID_AOCLK_GATE 80
#define CLKID_IEC958_GATE 81
#define CLKID_ENC480P 82
#define CLKID_RNG1 83
#define CLKID_GCLK_VENCI_INT1 84
#define CLKID_VCLK2_VENCLMCC 85
#define CLKID_VCLK2_VENCL 86
#define CLKID_VCLK_OTHER 87
#define CLKID_EDP 88
#define CLKID_AO_MEDIA_CPU 89
#define CLKID_AO_AHB_SRAM 90
#define CLKID_AO_AHB_BUS 91
#define CLKID_AO_IFACE 92
clk: gxbb: expose i2c clocks I2C and AO_I2C clocks are needed for the i2c driver, expose to DT (and comment out in clk driver) Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Acked-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2016-09-14 18:06:05 +08:00
/* CLKID_AO_I2C */
clk: gxbb: add MMC gate clocks, and expose for DT Add the SD/eMMC gate clocks and expose them for use by DT. While at it, also explose FCLK_DIV2 since this is one of the input clocks to the mux internal to each of the SD/eMMC blocks. Signed-off-by: Kevin Hilman <khilman@baylibre.com> Tested-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-08-03 05:40:11 +08:00
/* CLKID_SD_EMMC_A */
/* CLKID_SD_EMMC_B */
/* CLKID_SD_EMMC_C */
clk: gxbb: add the SAR ADC clocks and expose them The HHI_SAR_CLK_CNTL contains three SAR ADC specific clocks: - a mux clock to choose between different ADC reference clocks (this is 2-bit wide, but the datasheet only lists the parents for the first bit) - a divider for the input/reference clock - a gate which enables the ADC clock Additionally this exposes the ADC core clock (CLKID_SAR_ADC) and CLKID_SANA (which seems to enable the analog inputs, but unfortunately there is no documentation for this - we just mimic what the vendor driver does). Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Tested-by: Neil Armstrong <narmstrong@baylibre.com> Acked-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2017-01-19 22:58:20 +08:00
/* CLKID_SAR_ADC_CLK */
/* CLKID_SAR_ADC_SEL */
#define CLKID_SAR_ADC_DIV 99
clk: gxbb: add AmLogic GXBB clk controller driver The gxbb clock controller is the primary clock generation unit for the AmLogic GXBB SoC. It is clocked by a fixed 24MHz xtal, contains several PLLs and the usual post-dividers, muxes, dividers and leaf gates that are fed into various IP blocks in the SoC. Tested-by: Kevin Hilman <khilman@baylibre.com> Signed-off-by: Michael Turquette <mturquette@baylibre.com>
2016-05-24 06:44:26 +08:00
clk: gxbb: add the SAR ADC clocks and expose them The HHI_SAR_CLK_CNTL contains three SAR ADC specific clocks: - a mux clock to choose between different ADC reference clocks (this is 2-bit wide, but the datasheet only lists the parents for the first bit) - a divider for the input/reference clock - a gate which enables the ADC clock Additionally this exposes the ADC core clock (CLKID_SAR_ADC) and CLKID_SANA (which seems to enable the analog inputs, but unfortunately there is no documentation for this - we just mimic what the vendor driver does). Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Tested-by: Neil Armstrong <narmstrong@baylibre.com> Acked-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2017-01-19 22:58:20 +08:00
#define NR_CLKS 100
clk: gxbb: add AmLogic GXBB clk controller driver The gxbb clock controller is the primary clock generation unit for the AmLogic GXBB SoC. It is clocked by a fixed 24MHz xtal, contains several PLLs and the usual post-dividers, muxes, dividers and leaf gates that are fed into various IP blocks in the SoC. Tested-by: Kevin Hilman <khilman@baylibre.com> Signed-off-by: Michael Turquette <mturquette@baylibre.com>
2016-05-24 06:44:26 +08:00
/* include the CLKIDs that have been made part of the stable DT binding */
#include <dt-bindings/clock/gxbb-clkc.h>
#endif /* __GXBB_H */