UbiquitousOS
/
OpenCloudOS-Kernel
mirror of https://gitee.com/OpenCloudOS/OpenCloudOS-Kernel.git
11
0
Fork 0
Code Issues Projects Releases Wiki Activity
OpenCloudOS-Kernel/arch/arm/include/asm/assembler.h

522 lines
11 KiB
C
Raw Normal View History

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
/*
[ARM] move include/asm-arm to arch/arm/include/asm Move platform independent header files to arch/arm/include/asm, leaving those in asm/arch* and asm/plat* alone. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-08-02 17:55:55 +08:00
* arch/arm/include/asm/assembler.h
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
*
* Copyright (C) 1996-2000 Russell King
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* This file contains arm architecture specific defines
* for the different processors.
*
* Do not include any C declarations in this file - it is included by
* assembler source.
*/
ARM: 6959/1: SMP build fix for entry-macro-multi.S The assembly code in entry-macro-multi.S does not build without the include asm/assembler.h in the case of CONFIG_SMP=y. Fixes the rather theoretical SMP build of mach-shmobile/entry-intc.c: arch/arm/include/asm/entry-macro-multi.S: Assembler messages: arch/arm/include/asm/entry-macro-multi.S:20: Error: bad instruction `alt_smp(test_for_ipi r0,r6,r5,lr)' arch/arm/include/asm/entry-macro-multi.S:20: Error: bad instruction `alt_up_b(9997f)' make[1]: *** [arch/arm/mach-shmobile/entry-intc.o] Error 1 make: *** [arch/arm/mach-shmobile] Error 2 make: *** Waiting for unfinished jobs.... Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-06-13 13:46:44 +08:00
#ifndef __ASM_ASSEMBLER_H__
#define __ASM_ASSEMBLER_H__
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#ifndef __ASSEMBLY__
#error "Only include this from assembly code"
#endif
#include <asm/ptrace.h>
ARM: 6384/1: Remove the domain switching on ARMv6k/v7 CPUs This patch removes the domain switching functionality via the set_fs and __switch_to functions on cores that have a TLS register. Currently, the ioremap and vmalloc areas share the same level 1 page tables and therefore have the same domain (DOMAIN_KERNEL). When the kernel domain is modified from Client to Manager (via the __set_fs or in the __switch_to function), the XN (eXecute Never) bit is overridden and newer CPUs can speculatively prefetch the ioremap'ed memory. Linux performs the kernel domain switching to allow user-specific functions (copy_to/from_user, get/put_user etc.) to access kernel memory. In order for these functions to work with the kernel domain set to Client, the patch modifies the LDRT/STRT and related instructions to the LDR/STR ones. The user pages access rights are also modified for kernel read-only access rather than read/write so that the copy-on-write mechanism still works. CPU_USE_DOMAINS gets disabled only if the hardware has a TLS register (CPU_32v6K is defined) since writing the TLS value to the high vectors page isn't possible. The user addresses passed to the kernel are checked by the access_ok() function so that they do not point to the kernel space. Tested-by: Anton Vorontsov <cbouatmailru@gmail.com> Cc: Tony Lindgren <tony@atomide.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-09-13 23:03:21 +08:00
#include <asm/domain.h>
ARM: virt: allow the kernel to be entered in HYP mode This patch does two things: * Ensure that asynchronous aborts are masked at kernel entry. The bootloader should be masking these anyway, but this reduces the damage window just in case it doesn't. * Enter svc mode via exception return to ensure that CPU state is properly serialised. This does not matter when switching from an ordinary privileged mode ("PL1" modes in ARMv7-AR rev C parlance), but it potentially does matter when switching from a another privileged mode such as hyp mode. This should allow the kernel to boot safely either from svc mode or hyp mode, even if no support for use of the ARM Virtualization Extensions is built into the kernel. Signed-off-by: Dave Martin <dave.martin@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2012-02-10 00:47:17 +08:00
#include <asm/opcodes-virt.h>
ARM: 8018/1: Add {inc,dec}_preempt_count asm macros The patch adds asm macros for inc_preempt_count and dec_preempt_count_ti (which also gets the current thread_info) instead of open-coding them in arch/arm/vfp/*.S files. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Tested-by: Arun KS <getarunks@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2014-04-02 17:57:49 +08:00
#include <asm/asm-offsets.h>
ARM: 8078/1: get rid of hardcoded assumptions about kernel stack size Changing kernel stack size on arm is not as simple as it should be: 1) THREAD_SIZE macro doesn't respect PAGE_SIZE and THREAD_SIZE_ORDER 2) stack size is hardcoded in get_thread_info macro This patch fixes it by calculating THREAD_SIZE and thread_info address taking into account PAGE_SIZE and THREAD_SIZE_ORDER. Now changing stack size becomes simply changing THREAD_SIZE_ORDER. Signed-off-by: Andrey Ryabinin <a.ryabinin@samsung.com> Acked-by: Nicolas Pitre <nico@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2014-06-18 23:12:40 +08:00
#include <asm/page.h>
#include <asm/thread_info.h>
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
ARM: create a common IOMEM definition Several platforms create IOMEM defines for casting to 'void __iomem *', and other platforms are incorrectly using __io() macro for the same purpose. This creates a common definition and removes all the platform specific versions. Rather than try to make linux/io.h and asm/io.h assembly safe, the assembly version of IOMEM is moved into asm/assembler.h. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Sekhar Nori <nsekhar@ti.com> Cc: Kevin Hilman <khilman@ti.com> Acked-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ryan Mallon <rmallon@gmail.com> Cc: Eric Miao <eric.y.miao@gmail.com> Cc: Haojian Zhuang <haojian.zhuang@marvell.com> Acked-by: David Brown <davidb@codeaurora.org> Cc: Daniel Walker <dwalker@fifo99.com> Cc: Bryan Huntsman <bryanh@codeaurora.org> Cc: Sascha Hauer <kernel@pengutronix.de> Cc: Shawn Guo <shawn.guo@linaro.org> Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Paul Walmsley <paul@pwsan.com> Acked-by: Viresh Kumar <viresh.kumar@st.com> Cc: Rajeev Kumar <rajeev-dlh.kumar@st.com> Cc: Colin Cross <ccross@android.com> Cc: Olof Johansson <olof@lixom.net> Cc: Stephen Warren <swarren@nvidia.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Arnd Bergmann <arnd@arndb.de>
2012-03-11 00:30:31 +08:00
#define IOMEM(x) (x)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
/*
* Endian independent macros for shifting bytes within registers.
*/
#ifndef __ARMEB__
ARM: 7990/1: asm: rename logical shift macros push pull into lspush lspull Renames logical shift macros, 'push' and 'pull', defined in arch/arm/include/asm/assembler.h, into 'lspush' and 'lspull'. That eliminates name conflict between 'push' logical shift macro and 'push' instruction mnemonic. That allows assembler.h to be included in .S files that use 'push' instruction. Suggested-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Victor Kamensky <victor.kamensky@linaro.org> Acked-by: Nicolas Pitre <nico@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2014-02-25 15:41:09 +08:00
#define lspull lsr
#define lspush lsl
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#define get_byte_0 lsl #0
#define get_byte_1 lsr #8
#define get_byte_2 lsr #16
#define get_byte_3 lsr #24
#define put_byte_0 lsl #0
#define put_byte_1 lsl #8
#define put_byte_2 lsl #16
#define put_byte_3 lsl #24
#else
ARM: 7990/1: asm: rename logical shift macros push pull into lspush lspull Renames logical shift macros, 'push' and 'pull', defined in arch/arm/include/asm/assembler.h, into 'lspush' and 'lspull'. That eliminates name conflict between 'push' logical shift macro and 'push' instruction mnemonic. That allows assembler.h to be included in .S files that use 'push' instruction. Suggested-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Victor Kamensky <victor.kamensky@linaro.org> Acked-by: Nicolas Pitre <nico@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2014-02-25 15:41:09 +08:00
#define lspull lsl
#define lspush lsr
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#define get_byte_0 lsr #24
#define get_byte_1 lsr #16
#define get_byte_2 lsr #8
#define get_byte_3 lsl #0
#define put_byte_0 lsl #24
#define put_byte_1 lsl #16
#define put_byte_2 lsl #8
#define put_byte_3 lsl #0
#endif
ARM: asm: Add ARM_BE8() assembly helper Add ARM_BE8() helper to wrap any code conditional on being compile when CONFIG_ARM_ENDIAN_BE8 is selected and convert existing places where this is to use it. Acked-by: Nicolas Pitre <nico@linaro.org> Reviewed-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
2013-02-13 02:59:57 +08:00
/* Select code for any configuration running in BE8 mode */
#ifdef CONFIG_CPU_ENDIAN_BE8
#define ARM_BE8(code...) code
#else
#define ARM_BE8(code...)
#endif
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
/*
* Data preload for architectures that support it
*/
#if __LINUX_ARM_ARCH__ >= 5
#define PLD(code...) code
#else
#define PLD(code...)
#endif
[ARM] cache align destination pointer when copying memory for some processors The implementation for memory copy functions on ARM had a (disabled) provision for aligning the source pointer before loading registers with data. Turns out that aligning the _destination_ pointer is much more useful, as the read side is already sufficiently helped with the use of preload. So this changes the definition of the CALGN() macro to target the destination pointer instead, and turns it on for Feroceon processors where the gain is very noticeable. Signed-off-by: Nicolas Pitre <nico@marvell.com> Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>
2008-04-01 00:38:31 +08:00
/*
* This can be used to enable code to cacheline align the destination
* pointer when bulk writing to memory. Experiments on StrongARM and
* XScale didn't show this a worthwhile thing to do when the cache is not
* set to write-allocate (this would need further testing on XScale when WA
* is used).
*
* On Feroceon there is much to gain however, regardless of cache mode.
*/
#ifdef CONFIG_CPU_FEROCEON
#define CALGN(code...) code
#else
#define CALGN(code...)
#endif
ARM: Prepare for randomized task_struct With the new task struct randomization, we can run into a build failure for certain random seeds, which will place fields beyond the allow immediate size in the assembly: arch/arm/kernel/entry-armv.S: Assembler messages: arch/arm/kernel/entry-armv.S:803: Error: bad immediate value for offset (4096) Only two constants in asm-offset.h are affected, and I'm changing both of them here to work correctly in all configurations. One more macro has the problem, but is currently unused, so this removes it instead of adding complexity. Suggested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> [kees: Adjust commit log slightly] Signed-off-by: Kees Cook <keescook@chromium.org>
2017-07-01 00:03:59 +08:00
#define IMM12_MASK 0xfff
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
/*
[ARM] Move enable_irq and disable_irq to assembler.h 5d25ac038a317d454a4321cba955f756400835a5 broke VFP builds due to enable_irq not being defined as an assembly macro. Move it to assembler.h so everyone can use it. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-03-24 00:59:37 +08:00
* Enable and disable interrupts
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
*/
[ARM] Clean up save_and_disable_irqs macro and allow use of ARMv6 CPSID save_and_disable_irqs does not need to use mov + msr (which was introduced to work around a documentation bug which was propagated into binutils.) Use msr with an immediate constant, and if we're building for ARMv6 or later, use the new CPSID instruction. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-11-09 23:04:22 +08:00
#if __LINUX_ARM_ARCH__ >= 6
Complete irq tracing support for ARM Before this patch enabling and disabling irqs in assembler code and by the hardware wasn't tracked completly. I had to transpose two instructions in arch/arm/lib/bitops.h because restore_irqs doesn't preserve the flags with CONFIG_TRACE_IRQFLAGS=y Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Cc: Russell King <linux@arm.linux.org.uk> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ingo Molnar <mingo@redhat.com> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2009-08-14 02:38:17 +08:00
.macro disable_irq_notrace
[ARM] Clean up save_and_disable_irqs macro and allow use of ARMv6 CPSID save_and_disable_irqs does not need to use mov + msr (which was introduced to work around a documentation bug which was propagated into binutils.) Use msr with an immediate constant, and if we're building for ARMv6 or later, use the new CPSID instruction. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-11-09 23:04:22 +08:00
cpsid i
[ARM] Move enable_irq and disable_irq to assembler.h 5d25ac038a317d454a4321cba955f756400835a5 broke VFP builds due to enable_irq not being defined as an assembly macro. Move it to assembler.h so everyone can use it. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-03-24 00:59:37 +08:00
.endm
Complete irq tracing support for ARM Before this patch enabling and disabling irqs in assembler code and by the hardware wasn't tracked completly. I had to transpose two instructions in arch/arm/lib/bitops.h because restore_irqs doesn't preserve the flags with CONFIG_TRACE_IRQFLAGS=y Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Cc: Russell King <linux@arm.linux.org.uk> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ingo Molnar <mingo@redhat.com> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2009-08-14 02:38:17 +08:00
.macro enable_irq_notrace
[ARM] Move enable_irq and disable_irq to assembler.h 5d25ac038a317d454a4321cba955f756400835a5 broke VFP builds due to enable_irq not being defined as an assembly macro. Move it to assembler.h so everyone can use it. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-03-24 00:59:37 +08:00
cpsie i
.endm
[ARM] Clean up save_and_disable_irqs macro and allow use of ARMv6 CPSID save_and_disable_irqs does not need to use mov + msr (which was introduced to work around a documentation bug which was propagated into binutils.) Use msr with an immediate constant, and if we're building for ARMv6 or later, use the new CPSID instruction. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-11-09 23:04:22 +08:00
#else
Complete irq tracing support for ARM Before this patch enabling and disabling irqs in assembler code and by the hardware wasn't tracked completly. I had to transpose two instructions in arch/arm/lib/bitops.h because restore_irqs doesn't preserve the flags with CONFIG_TRACE_IRQFLAGS=y Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Cc: Russell King <linux@arm.linux.org.uk> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ingo Molnar <mingo@redhat.com> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2009-08-14 02:38:17 +08:00
.macro disable_irq_notrace
[ARM] Move enable_irq and disable_irq to assembler.h 5d25ac038a317d454a4321cba955f756400835a5 broke VFP builds due to enable_irq not being defined as an assembly macro. Move it to assembler.h so everyone can use it. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-03-24 00:59:37 +08:00
msr cpsr_c, #PSR_I_BIT | SVC_MODE
.endm
Complete irq tracing support for ARM Before this patch enabling and disabling irqs in assembler code and by the hardware wasn't tracked completly. I had to transpose two instructions in arch/arm/lib/bitops.h because restore_irqs doesn't preserve the flags with CONFIG_TRACE_IRQFLAGS=y Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Cc: Russell King <linux@arm.linux.org.uk> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ingo Molnar <mingo@redhat.com> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2009-08-14 02:38:17 +08:00
.macro enable_irq_notrace
[ARM] Move enable_irq and disable_irq to assembler.h 5d25ac038a317d454a4321cba955f756400835a5 broke VFP builds due to enable_irq not being defined as an assembly macro. Move it to assembler.h so everyone can use it. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-03-24 00:59:37 +08:00
msr cpsr_c, #SVC_MODE
.endm
[ARM] Clean up save_and_disable_irqs macro and allow use of ARMv6 CPSID save_and_disable_irqs does not need to use mov + msr (which was introduced to work around a documentation bug which was propagated into binutils.) Use msr with an immediate constant, and if we're building for ARMv6 or later, use the new CPSID instruction. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-11-09 23:04:22 +08:00
#endif
[ARM] Move enable_irq and disable_irq to assembler.h 5d25ac038a317d454a4321cba955f756400835a5 broke VFP builds due to enable_irq not being defined as an assembly macro. Move it to assembler.h so everyone can use it. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-03-24 00:59:37 +08:00
ARM: entry: efficiency cleanups Make the "fast" syscall return path fast again. The addition of IRQ tracing and context tracking has made this path grossly inefficient. We can do much better if these options are enabled if we save the syscall return code on the stack - we then don't need to save a bunch of registers around every single callout to C code. Acked-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2015-08-20 23:13:37 +08:00
.macro asm_trace_hardirqs_off, save=1
Complete irq tracing support for ARM Before this patch enabling and disabling irqs in assembler code and by the hardware wasn't tracked completly. I had to transpose two instructions in arch/arm/lib/bitops.h because restore_irqs doesn't preserve the flags with CONFIG_TRACE_IRQFLAGS=y Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Cc: Russell King <linux@arm.linux.org.uk> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ingo Molnar <mingo@redhat.com> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2009-08-14 02:38:17 +08:00
#if defined(CONFIG_TRACE_IRQFLAGS)
ARM: entry: efficiency cleanups Make the "fast" syscall return path fast again. The addition of IRQ tracing and context tracking has made this path grossly inefficient. We can do much better if these options are enabled if we save the syscall return code on the stack - we then don't need to save a bunch of registers around every single callout to C code. Acked-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2015-08-20 23:13:37 +08:00
.if \save
Complete irq tracing support for ARM Before this patch enabling and disabling irqs in assembler code and by the hardware wasn't tracked completly. I had to transpose two instructions in arch/arm/lib/bitops.h because restore_irqs doesn't preserve the flags with CONFIG_TRACE_IRQFLAGS=y Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Cc: Russell King <linux@arm.linux.org.uk> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ingo Molnar <mingo@redhat.com> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2009-08-14 02:38:17 +08:00
stmdb sp!, {r0-r3, ip, lr}
ARM: entry: efficiency cleanups Make the "fast" syscall return path fast again. The addition of IRQ tracing and context tracking has made this path grossly inefficient. We can do much better if these options are enabled if we save the syscall return code on the stack - we then don't need to save a bunch of registers around every single callout to C code. Acked-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2015-08-20 23:13:37 +08:00
.endif
Complete irq tracing support for ARM Before this patch enabling and disabling irqs in assembler code and by the hardware wasn't tracked completly. I had to transpose two instructions in arch/arm/lib/bitops.h because restore_irqs doesn't preserve the flags with CONFIG_TRACE_IRQFLAGS=y Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Cc: Russell King <linux@arm.linux.org.uk> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ingo Molnar <mingo@redhat.com> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2009-08-14 02:38:17 +08:00
bl trace_hardirqs_off
ARM: entry: efficiency cleanups Make the "fast" syscall return path fast again. The addition of IRQ tracing and context tracking has made this path grossly inefficient. We can do much better if these options are enabled if we save the syscall return code on the stack - we then don't need to save a bunch of registers around every single callout to C code. Acked-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2015-08-20 23:13:37 +08:00
.if \save
Complete irq tracing support for ARM Before this patch enabling and disabling irqs in assembler code and by the hardware wasn't tracked completly. I had to transpose two instructions in arch/arm/lib/bitops.h because restore_irqs doesn't preserve the flags with CONFIG_TRACE_IRQFLAGS=y Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Cc: Russell King <linux@arm.linux.org.uk> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ingo Molnar <mingo@redhat.com> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2009-08-14 02:38:17 +08:00
ldmia sp!, {r0-r3, ip, lr}
ARM: entry: efficiency cleanups Make the "fast" syscall return path fast again. The addition of IRQ tracing and context tracking has made this path grossly inefficient. We can do much better if these options are enabled if we save the syscall return code on the stack - we then don't need to save a bunch of registers around every single callout to C code. Acked-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2015-08-20 23:13:37 +08:00
.endif
Complete irq tracing support for ARM Before this patch enabling and disabling irqs in assembler code and by the hardware wasn't tracked completly. I had to transpose two instructions in arch/arm/lib/bitops.h because restore_irqs doesn't preserve the flags with CONFIG_TRACE_IRQFLAGS=y Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Cc: Russell King <linux@arm.linux.org.uk> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ingo Molnar <mingo@redhat.com> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2009-08-14 02:38:17 +08:00
#endif
.endm
ARM: entry: efficiency cleanups Make the "fast" syscall return path fast again. The addition of IRQ tracing and context tracking has made this path grossly inefficient. We can do much better if these options are enabled if we save the syscall return code on the stack - we then don't need to save a bunch of registers around every single callout to C code. Acked-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2015-08-20 23:13:37 +08:00
.macro asm_trace_hardirqs_on, cond=al, save=1
Complete irq tracing support for ARM Before this patch enabling and disabling irqs in assembler code and by the hardware wasn't tracked completly. I had to transpose two instructions in arch/arm/lib/bitops.h because restore_irqs doesn't preserve the flags with CONFIG_TRACE_IRQFLAGS=y Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Cc: Russell King <linux@arm.linux.org.uk> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ingo Molnar <mingo@redhat.com> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2009-08-14 02:38:17 +08:00
#if defined(CONFIG_TRACE_IRQFLAGS)
/*
* actually the registers should be pushed and pop'd conditionally, but
* after bl the flags are certainly clobbered
*/
ARM: entry: efficiency cleanups Make the "fast" syscall return path fast again. The addition of IRQ tracing and context tracking has made this path grossly inefficient. We can do much better if these options are enabled if we save the syscall return code on the stack - we then don't need to save a bunch of registers around every single callout to C code. Acked-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2015-08-20 23:13:37 +08:00
.if \save
Complete irq tracing support for ARM Before this patch enabling and disabling irqs in assembler code and by the hardware wasn't tracked completly. I had to transpose two instructions in arch/arm/lib/bitops.h because restore_irqs doesn't preserve the flags with CONFIG_TRACE_IRQFLAGS=y Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Cc: Russell King <linux@arm.linux.org.uk> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ingo Molnar <mingo@redhat.com> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2009-08-14 02:38:17 +08:00
stmdb sp!, {r0-r3, ip, lr}
ARM: entry: efficiency cleanups Make the "fast" syscall return path fast again. The addition of IRQ tracing and context tracking has made this path grossly inefficient. We can do much better if these options are enabled if we save the syscall return code on the stack - we then don't need to save a bunch of registers around every single callout to C code. Acked-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2015-08-20 23:13:37 +08:00
.endif
Complete irq tracing support for ARM Before this patch enabling and disabling irqs in assembler code and by the hardware wasn't tracked completly. I had to transpose two instructions in arch/arm/lib/bitops.h because restore_irqs doesn't preserve the flags with CONFIG_TRACE_IRQFLAGS=y Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Cc: Russell King <linux@arm.linux.org.uk> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ingo Molnar <mingo@redhat.com> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2009-08-14 02:38:17 +08:00
bl\cond trace_hardirqs_on
ARM: entry: efficiency cleanups Make the "fast" syscall return path fast again. The addition of IRQ tracing and context tracking has made this path grossly inefficient. We can do much better if these options are enabled if we save the syscall return code on the stack - we then don't need to save a bunch of registers around every single callout to C code. Acked-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2015-08-20 23:13:37 +08:00
.if \save
Complete irq tracing support for ARM Before this patch enabling and disabling irqs in assembler code and by the hardware wasn't tracked completly. I had to transpose two instructions in arch/arm/lib/bitops.h because restore_irqs doesn't preserve the flags with CONFIG_TRACE_IRQFLAGS=y Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Cc: Russell King <linux@arm.linux.org.uk> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ingo Molnar <mingo@redhat.com> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2009-08-14 02:38:17 +08:00
ldmia sp!, {r0-r3, ip, lr}
ARM: entry: efficiency cleanups Make the "fast" syscall return path fast again. The addition of IRQ tracing and context tracking has made this path grossly inefficient. We can do much better if these options are enabled if we save the syscall return code on the stack - we then don't need to save a bunch of registers around every single callout to C code. Acked-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2015-08-20 23:13:37 +08:00
.endif
Complete irq tracing support for ARM Before this patch enabling and disabling irqs in assembler code and by the hardware wasn't tracked completly. I had to transpose two instructions in arch/arm/lib/bitops.h because restore_irqs doesn't preserve the flags with CONFIG_TRACE_IRQFLAGS=y Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Cc: Russell King <linux@arm.linux.org.uk> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ingo Molnar <mingo@redhat.com> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2009-08-14 02:38:17 +08:00
#endif
.endm
ARM: entry: efficiency cleanups Make the "fast" syscall return path fast again. The addition of IRQ tracing and context tracking has made this path grossly inefficient. We can do much better if these options are enabled if we save the syscall return code on the stack - we then don't need to save a bunch of registers around every single callout to C code. Acked-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2015-08-20 23:13:37 +08:00
.macro disable_irq, save=1
Complete irq tracing support for ARM Before this patch enabling and disabling irqs in assembler code and by the hardware wasn't tracked completly. I had to transpose two instructions in arch/arm/lib/bitops.h because restore_irqs doesn't preserve the flags with CONFIG_TRACE_IRQFLAGS=y Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Cc: Russell King <linux@arm.linux.org.uk> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ingo Molnar <mingo@redhat.com> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2009-08-14 02:38:17 +08:00
disable_irq_notrace
ARM: entry: efficiency cleanups Make the "fast" syscall return path fast again. The addition of IRQ tracing and context tracking has made this path grossly inefficient. We can do much better if these options are enabled if we save the syscall return code on the stack - we then don't need to save a bunch of registers around every single callout to C code. Acked-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2015-08-20 23:13:37 +08:00
asm_trace_hardirqs_off \save
Complete irq tracing support for ARM Before this patch enabling and disabling irqs in assembler code and by the hardware wasn't tracked completly. I had to transpose two instructions in arch/arm/lib/bitops.h because restore_irqs doesn't preserve the flags with CONFIG_TRACE_IRQFLAGS=y Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Cc: Russell King <linux@arm.linux.org.uk> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ingo Molnar <mingo@redhat.com> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2009-08-14 02:38:17 +08:00
.endm
.macro enable_irq
asm_trace_hardirqs_on
enable_irq_notrace
.endm
[ARM] Move enable_irq and disable_irq to assembler.h 5d25ac038a317d454a4321cba955f756400835a5 broke VFP builds due to enable_irq not being defined as an assembly macro. Move it to assembler.h so everyone can use it. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-03-24 00:59:37 +08:00
/*
* Save the current IRQ state and disable IRQs. Note that this macro
* assumes FIQs are enabled, and that the processor is in SVC mode.
*/
.macro save_and_disable_irqs, oldcpsr
ARM: Add base support for ARMv7-M This patch adds the base support for the ARMv7-M architecture. It consists of the corresponding arch/arm/mm/ files and various #ifdef's around the kernel. Exception handling is implemented by a subsequent patch. [ukleinek: squash in some changes originating from commit b5717ba (Cortex-M3: Add support for the Microcontroller Prototyping System) from the v2.6.33-arm1 patch stack, port to post 3.6, drop zImage support, drop reorganisation of pt_regs, assert CONFIG_CPU_V7M doesn't leak into installed headers and a few cosmetic changes] Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Reviewed-by: Jonathan Austin <jonathan.austin@arm.com> Tested-by: Jonathan Austin <jonathan.austin@arm.com> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-05-22 01:06:41 +08:00
#ifdef CONFIG_CPU_V7M
mrs \oldcpsr, primask
#else
[ARM] Move enable_irq and disable_irq to assembler.h 5d25ac038a317d454a4321cba955f756400835a5 broke VFP builds due to enable_irq not being defined as an assembly macro. Move it to assembler.h so everyone can use it. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-03-24 00:59:37 +08:00
mrs \oldcpsr, cpsr
ARM: Add base support for ARMv7-M This patch adds the base support for the ARMv7-M architecture. It consists of the corresponding arch/arm/mm/ files and various #ifdef's around the kernel. Exception handling is implemented by a subsequent patch. [ukleinek: squash in some changes originating from commit b5717ba (Cortex-M3: Add support for the Microcontroller Prototyping System) from the v2.6.33-arm1 patch stack, port to post 3.6, drop zImage support, drop reorganisation of pt_regs, assert CONFIG_CPU_V7M doesn't leak into installed headers and a few cosmetic changes] Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Reviewed-by: Jonathan Austin <jonathan.austin@arm.com> Tested-by: Jonathan Austin <jonathan.austin@arm.com> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-05-22 01:06:41 +08:00
#endif
[ARM] Move enable_irq and disable_irq to assembler.h 5d25ac038a317d454a4321cba955f756400835a5 broke VFP builds due to enable_irq not being defined as an assembly macro. Move it to assembler.h so everyone can use it. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-03-24 00:59:37 +08:00
disable_irq
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
.endm
ARM: 7325/1: fix v7 boot with lockdep enabled Bootup with lockdep enabled has been broken on v7 since b46c0f74657d ("ARM: 7321/1: cache-v7: Disable preemption when reading CCSIDR"). This is because v7_setup (which is called very early during boot) calls v7_flush_dcache_all, and the save_and_disable_irqs added by that patch ends up attempting to call into lockdep C code (trace_hardirqs_off()) when we are in no position to execute it (no stack, MMU off). Fix this by using a notrace variant of save_and_disable_irqs. The code already uses the notrace variant of restore_irqs. Reviewed-by: Nicolas Pitre <nico@linaro.org> Acked-by: Stephen Boyd <sboyd@codeaurora.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: stable@vger.kernel.org Signed-off-by: Rabin Vincent <rabin@rab.in> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-02-15 23:01:42 +08:00
.macro save_and_disable_irqs_notrace, oldcpsr
ARM: 8605/1: V7M: fix notrace variant of save_and_disable_irqs Commit 8e43a905 "ARM: 7325/1: fix v7 boot with lockdep enabled" introduced notrace variant of save_and_disable_irqs to balance notrace variant of restore_irqs; however V7M case has been missed. It was not noticed because cache-v7.S the only place where notrace variant is used. So fix it, since we are going to extend V7 cache routines to handle V7M case too. Signed-off-by: Vladimir Murzin <vladimir.murzin@arm.com> Tested-by: Andras Szemzo <sza@esh.hu> Tested-by: Joachim Eastwood <manabian@gmail.com> Tested-by: Alexandre TORGUE <alexandre.torgue@st.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2016-08-31 00:28:43 +08:00
#ifdef CONFIG_CPU_V7M
mrs \oldcpsr, primask
#else
ARM: 7325/1: fix v7 boot with lockdep enabled Bootup with lockdep enabled has been broken on v7 since b46c0f74657d ("ARM: 7321/1: cache-v7: Disable preemption when reading CCSIDR"). This is because v7_setup (which is called very early during boot) calls v7_flush_dcache_all, and the save_and_disable_irqs added by that patch ends up attempting to call into lockdep C code (trace_hardirqs_off()) when we are in no position to execute it (no stack, MMU off). Fix this by using a notrace variant of save_and_disable_irqs. The code already uses the notrace variant of restore_irqs. Reviewed-by: Nicolas Pitre <nico@linaro.org> Acked-by: Stephen Boyd <sboyd@codeaurora.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: stable@vger.kernel.org Signed-off-by: Rabin Vincent <rabin@rab.in> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-02-15 23:01:42 +08:00
mrs \oldcpsr, cpsr
ARM: 8605/1: V7M: fix notrace variant of save_and_disable_irqs Commit 8e43a905 "ARM: 7325/1: fix v7 boot with lockdep enabled" introduced notrace variant of save_and_disable_irqs to balance notrace variant of restore_irqs; however V7M case has been missed. It was not noticed because cache-v7.S the only place where notrace variant is used. So fix it, since we are going to extend V7 cache routines to handle V7M case too. Signed-off-by: Vladimir Murzin <vladimir.murzin@arm.com> Tested-by: Andras Szemzo <sza@esh.hu> Tested-by: Joachim Eastwood <manabian@gmail.com> Tested-by: Alexandre TORGUE <alexandre.torgue@st.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2016-08-31 00:28:43 +08:00
#endif
ARM: 7325/1: fix v7 boot with lockdep enabled Bootup with lockdep enabled has been broken on v7 since b46c0f74657d ("ARM: 7321/1: cache-v7: Disable preemption when reading CCSIDR"). This is because v7_setup (which is called very early during boot) calls v7_flush_dcache_all, and the save_and_disable_irqs added by that patch ends up attempting to call into lockdep C code (trace_hardirqs_off()) when we are in no position to execute it (no stack, MMU off). Fix this by using a notrace variant of save_and_disable_irqs. The code already uses the notrace variant of restore_irqs. Reviewed-by: Nicolas Pitre <nico@linaro.org> Acked-by: Stephen Boyd <sboyd@codeaurora.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: stable@vger.kernel.org Signed-off-by: Rabin Vincent <rabin@rab.in> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-02-15 23:01:42 +08:00
disable_irq_notrace
.endm
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
/*
* Restore interrupt state previously stored in a register. We don't
* guarantee that this will preserve the flags.
*/
Complete irq tracing support for ARM Before this patch enabling and disabling irqs in assembler code and by the hardware wasn't tracked completly. I had to transpose two instructions in arch/arm/lib/bitops.h because restore_irqs doesn't preserve the flags with CONFIG_TRACE_IRQFLAGS=y Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Cc: Russell King <linux@arm.linux.org.uk> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ingo Molnar <mingo@redhat.com> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2009-08-14 02:38:17 +08:00
.macro restore_irqs_notrace, oldcpsr
ARM: Add base support for ARMv7-M This patch adds the base support for the ARMv7-M architecture. It consists of the corresponding arch/arm/mm/ files and various #ifdef's around the kernel. Exception handling is implemented by a subsequent patch. [ukleinek: squash in some changes originating from commit b5717ba (Cortex-M3: Add support for the Microcontroller Prototyping System) from the v2.6.33-arm1 patch stack, port to post 3.6, drop zImage support, drop reorganisation of pt_regs, assert CONFIG_CPU_V7M doesn't leak into installed headers and a few cosmetic changes] Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Reviewed-by: Jonathan Austin <jonathan.austin@arm.com> Tested-by: Jonathan Austin <jonathan.austin@arm.com> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-05-22 01:06:41 +08:00
#ifdef CONFIG_CPU_V7M
msr primask, \oldcpsr
#else
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
msr cpsr_c, \oldcpsr
ARM: Add base support for ARMv7-M This patch adds the base support for the ARMv7-M architecture. It consists of the corresponding arch/arm/mm/ files and various #ifdef's around the kernel. Exception handling is implemented by a subsequent patch. [ukleinek: squash in some changes originating from commit b5717ba (Cortex-M3: Add support for the Microcontroller Prototyping System) from the v2.6.33-arm1 patch stack, port to post 3.6, drop zImage support, drop reorganisation of pt_regs, assert CONFIG_CPU_V7M doesn't leak into installed headers and a few cosmetic changes] Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Reviewed-by: Jonathan Austin <jonathan.austin@arm.com> Tested-by: Jonathan Austin <jonathan.austin@arm.com> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-05-22 01:06:41 +08:00
#endif
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
.endm
Complete irq tracing support for ARM Before this patch enabling and disabling irqs in assembler code and by the hardware wasn't tracked completly. I had to transpose two instructions in arch/arm/lib/bitops.h because restore_irqs doesn't preserve the flags with CONFIG_TRACE_IRQFLAGS=y Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Cc: Russell King <linux@arm.linux.org.uk> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ingo Molnar <mingo@redhat.com> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2009-08-14 02:38:17 +08:00
.macro restore_irqs, oldcpsr
tst \oldcpsr, #PSR_I_BIT
ARM: entry: get rid of asm_trace_hardirqs_on_cond There's no need for this macro, it can use a default for the condition argument. Acked-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2015-08-20 21:22:48 +08:00
asm_trace_hardirqs_on cond=eq
Complete irq tracing support for ARM Before this patch enabling and disabling irqs in assembler code and by the hardware wasn't tracked completly. I had to transpose two instructions in arch/arm/lib/bitops.h because restore_irqs doesn't preserve the flags with CONFIG_TRACE_IRQFLAGS=y Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Cc: Russell King <linux@arm.linux.org.uk> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ingo Molnar <mingo@redhat.com> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2009-08-14 02:38:17 +08:00
restore_irqs_notrace \oldcpsr
.endm
ARM: replace BSYM() with badr assembly macro BSYM() was invented to allow us to work around a problem with the assembler, where local symbols resolved by the assembler for the 'adr' instruction did not take account of their ISA. Since we don't want BSYM() used elsewhere, replace BSYM() with a new macro 'badr', which is like the 'adr' pseudo-op, but with the BSYM() mechanics integrated into it. This ensures that the BSYM()-ification is only used in conjunction with 'adr'. Acked-by: Dave Martin <Dave.Martin@arm.com> Acked-by: Nicolas Pitre <nico@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2015-04-21 21:17:25 +08:00
/*
* Assembly version of "adr rd, BSYM(sym)". This should only be used to
* reference local symbols in the same assembly file which are to be
* resolved by the assembler. Other usage is undefined.
*/
.irp c,,eq,ne,cs,cc,mi,pl,vs,vc,hi,ls,ge,lt,gt,le,hs,lo
.macro badr\c, rd, sym
#ifdef CONFIG_THUMB2_KERNEL
adr\c \rd, \sym + 1
#else
adr\c \rd, \sym
#endif
.endm
.endr
ARM: 8017/1: Move asm macro get_thread_info to asm/assembler.h asm/assembler.h is a better place for this macro since it is used by asm files outside arch/arm/kernel/ Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Tested-by: Arun KS <getarunks@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2014-04-02 17:57:48 +08:00
/*
* Get current thread_info.
*/
.macro get_thread_info, rd
ARM: 8078/1: get rid of hardcoded assumptions about kernel stack size Changing kernel stack size on arm is not as simple as it should be: 1) THREAD_SIZE macro doesn't respect PAGE_SIZE and THREAD_SIZE_ORDER 2) stack size is hardcoded in get_thread_info macro This patch fixes it by calculating THREAD_SIZE and thread_info address taking into account PAGE_SIZE and THREAD_SIZE_ORDER. Now changing stack size becomes simply changing THREAD_SIZE_ORDER. Signed-off-by: Andrey Ryabinin <a.ryabinin@samsung.com> Acked-by: Nicolas Pitre <nico@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2014-06-18 23:12:40 +08:00
ARM( mov \rd, sp, lsr #THREAD_SIZE_ORDER + PAGE_SHIFT )
ARM: 8017/1: Move asm macro get_thread_info to asm/assembler.h asm/assembler.h is a better place for this macro since it is used by asm files outside arch/arm/kernel/ Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Tested-by: Arun KS <getarunks@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2014-04-02 17:57:48 +08:00
THUMB( mov \rd, sp )
ARM: 8078/1: get rid of hardcoded assumptions about kernel stack size Changing kernel stack size on arm is not as simple as it should be: 1) THREAD_SIZE macro doesn't respect PAGE_SIZE and THREAD_SIZE_ORDER 2) stack size is hardcoded in get_thread_info macro This patch fixes it by calculating THREAD_SIZE and thread_info address taking into account PAGE_SIZE and THREAD_SIZE_ORDER. Now changing stack size becomes simply changing THREAD_SIZE_ORDER. Signed-off-by: Andrey Ryabinin <a.ryabinin@samsung.com> Acked-by: Nicolas Pitre <nico@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2014-06-18 23:12:40 +08:00
THUMB( lsr \rd, \rd, #THREAD_SIZE_ORDER + PAGE_SHIFT )
mov \rd, \rd, lsl #THREAD_SIZE_ORDER + PAGE_SHIFT
ARM: 8017/1: Move asm macro get_thread_info to asm/assembler.h asm/assembler.h is a better place for this macro since it is used by asm files outside arch/arm/kernel/ Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Tested-by: Arun KS <getarunks@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2014-04-02 17:57:48 +08:00
.endm
ARM: 8018/1: Add {inc,dec}_preempt_count asm macros The patch adds asm macros for inc_preempt_count and dec_preempt_count_ti (which also gets the current thread_info) instead of open-coding them in arch/arm/vfp/*.S files. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Tested-by: Arun KS <getarunks@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2014-04-02 17:57:49 +08:00
/*
* Increment/decrement the preempt count.
*/
#ifdef CONFIG_PREEMPT_COUNT
.macro inc_preempt_count, ti, tmp
ldr \tmp, [\ti, #TI_PREEMPT] @ get preempt count
add \tmp, \tmp, #1 @ increment it
str \tmp, [\ti, #TI_PREEMPT]
.endm
.macro dec_preempt_count, ti, tmp
ldr \tmp, [\ti, #TI_PREEMPT] @ get preempt count
sub \tmp, \tmp, #1 @ decrement it
str \tmp, [\ti, #TI_PREEMPT]
.endm
.macro dec_preempt_count_ti, ti, tmp
get_thread_info \ti
dec_preempt_count \ti, \tmp
.endm
#else
.macro inc_preempt_count, ti, tmp
.endm
.macro dec_preempt_count, ti, tmp
.endm
.macro dec_preempt_count_ti, ti, tmp
.endm
#endif
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#define USER(x...) \
9999: x; \
ARM: fix build error in arch/arm/kernel/process.c /tmp/ccJ3ssZW.s: Assembler messages: /tmp/ccJ3ssZW.s:1952: Error: can't resolve `.text' {.text section} - `.LFB1077' This is caused because: .section .data .section .text .section .text .previous does not return us to the .text section, but the .data section; this makes use of .previous dangerous if the ordering of previous sections is not known. Fix up the other users of .previous; .pushsection and .popsection are a safer pairing to use than .section and .previous. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-04-19 17:15:03 +08:00
.pushsection __ex_table,"a"; \
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
.align 3; \
.long 9999b,9001f; \
ARM: fix build error in arch/arm/kernel/process.c /tmp/ccJ3ssZW.s: Assembler messages: /tmp/ccJ3ssZW.s:1952: Error: can't resolve `.text' {.text section} - `.LFB1077' This is caused because: .section .data .section .text .section .text .previous does not return us to the .text section, but the .data section; this makes use of .previous dangerous if the ordering of previous sections is not known. Fix up the other users of .previous; .pushsection and .popsection are a safer pairing to use than .section and .previous. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-04-19 17:15:03 +08:00
.popsection
[ARM] barriers: improve xchg, bitops and atomic SMP barriers Mathieu Desnoyers pointed out that the ARM barriers were lacking: - cmpxchg, xchg and atomic add return need memory barriers on architectures which can reorder the relative order in which memory read/writes can be seen between CPUs, which seems to include recent ARM architectures. Those barriers are currently missing on ARM. - test_and_xxx_bit were missing SMP barriers. So put these barriers in. Provide separate atomic_add/atomic_sub operations which do not require barriers. Reported-Reviewed-and-Acked-by: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-05-26 03:58:00 +08:00
ARM: Allow SMP kernels to boot on UP systems UP systems do not implement all the instructions that SMP systems have, so in order to boot a SMP kernel on a UP system, we need to rewrite parts of the kernel. Do this using an 'alternatives' scheme, where the kernel code and data is modified prior to initialization to replace the SMP instructions, thereby rendering the problematical code ineffectual. We use the linker to generate a list of 32-bit word locations and their replacement values, and run through these replacements when we detect a UP system. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-09-04 17:47:48 +08:00
#ifdef CONFIG_SMP
#define ALT_SMP(instr...) \
9998: instr
ARM: 6516/1: Allow SMP_ON_UP to work with Thumb-2 kernels. * __fixup_smp_on_up has been modified with support for the THUMB2_KERNEL case. For THUMB2_KERNEL only, fixups are split into halfwords in case of misalignment, since we can't rely on unaligned accesses working before turning the MMU on. No attempt is made to optimise the aligned case, since the number of fixups is typically small, and it seems best to keep the code as simple as possible. * Add a rotate in the fixup_smp code in order to support CPU_BIG_ENDIAN, as suggested by Nicolas Pitre. * Add an assembly-time sanity-check to ALT_UP() to ensure that the content really is the right size (4 bytes). (No check is done for ALT_SMP(). Possibly, this could be fixed by splitting the two uses ot ALT_SMP() (ALT_SMP...SMP_UP versus ALT_SMP...SMP_UP_B) into two macros. In the first case, ALT_SMP needs to expand to >= 4 bytes, not == 4.) * smp_mpidr.h (which implements ALT_SMP()/ALT_UP() manually due to macro limitations) has not been modified: the affected instruction (mov) has no 16-bit encoding, so the correct instruction size is satisfied in this case. * A "mode" parameter has been added to smp_dmb: smp_dmb arm @ assumes 4-byte instructions (for ARM code, e.g. kuser) smp_dmb @ uses W() to ensure 4-byte instructions for ALT_SMP() This avoids assembly failures due to use of W() inside smp_dmb, when assembling pure-ARM code in the vectors page. There might be a better way to achieve this. * Kconfig: make SMP_ON_UP depend on (!THUMB2_KERNEL || !BIG_ENDIAN) i.e., THUMB2_KERNEL is now supported, but only if !BIG_ENDIAN (The fixup code for Thumb-2 currently assumes little-endian order.) Tested using a single generic realview kernel on: ARM RealView PB-A8 (CONFIG_THUMB2_KERNEL={n,y}) ARM RealView PBX-A9 (SMP) Signed-off-by: Dave Martin <dave.martin@linaro.org> Acked-by: Nicolas Pitre <nicolas.pitre@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-12-01 22:39:23 +08:00
/*
* Note: if you get assembler errors from ALT_UP() when building with
* CONFIG_THUMB2_KERNEL, you almost certainly need to use
* ALT_SMP( W(instr) ... )
*/
ARM: Allow SMP kernels to boot on UP systems UP systems do not implement all the instructions that SMP systems have, so in order to boot a SMP kernel on a UP system, we need to rewrite parts of the kernel. Do this using an 'alternatives' scheme, where the kernel code and data is modified prior to initialization to replace the SMP instructions, thereby rendering the problematical code ineffectual. We use the linker to generate a list of 32-bit word locations and their replacement values, and run through these replacements when we detect a UP system. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-09-04 17:47:48 +08:00
#define ALT_UP(instr...) \
.pushsection ".alt.smp.init", "a" ;\
.long 9998b ;\
ARM: 6516/1: Allow SMP_ON_UP to work with Thumb-2 kernels. * __fixup_smp_on_up has been modified with support for the THUMB2_KERNEL case. For THUMB2_KERNEL only, fixups are split into halfwords in case of misalignment, since we can't rely on unaligned accesses working before turning the MMU on. No attempt is made to optimise the aligned case, since the number of fixups is typically small, and it seems best to keep the code as simple as possible. * Add a rotate in the fixup_smp code in order to support CPU_BIG_ENDIAN, as suggested by Nicolas Pitre. * Add an assembly-time sanity-check to ALT_UP() to ensure that the content really is the right size (4 bytes). (No check is done for ALT_SMP(). Possibly, this could be fixed by splitting the two uses ot ALT_SMP() (ALT_SMP...SMP_UP versus ALT_SMP...SMP_UP_B) into two macros. In the first case, ALT_SMP needs to expand to >= 4 bytes, not == 4.) * smp_mpidr.h (which implements ALT_SMP()/ALT_UP() manually due to macro limitations) has not been modified: the affected instruction (mov) has no 16-bit encoding, so the correct instruction size is satisfied in this case. * A "mode" parameter has been added to smp_dmb: smp_dmb arm @ assumes 4-byte instructions (for ARM code, e.g. kuser) smp_dmb @ uses W() to ensure 4-byte instructions for ALT_SMP() This avoids assembly failures due to use of W() inside smp_dmb, when assembling pure-ARM code in the vectors page. There might be a better way to achieve this. * Kconfig: make SMP_ON_UP depend on (!THUMB2_KERNEL || !BIG_ENDIAN) i.e., THUMB2_KERNEL is now supported, but only if !BIG_ENDIAN (The fixup code for Thumb-2 currently assumes little-endian order.) Tested using a single generic realview kernel on: ARM RealView PB-A8 (CONFIG_THUMB2_KERNEL={n,y}) ARM RealView PBX-A9 (SMP) Signed-off-by: Dave Martin <dave.martin@linaro.org> Acked-by: Nicolas Pitre <nicolas.pitre@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-12-01 22:39:23 +08:00
9997: instr ;\
ARM: allow 16-bit instructions in ALT_UP() Allow ALT_UP() to cope with a 16-bit Thumb instruction by automatically inserting a following nop instruction. This allows us to care less about getting the assembler to emit a 32-bit thumb instruction. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2015-04-09 19:59:35 +08:00
.if . - 9997b == 2 ;\
nop ;\
.endif ;\
ARM: 6516/1: Allow SMP_ON_UP to work with Thumb-2 kernels. * __fixup_smp_on_up has been modified with support for the THUMB2_KERNEL case. For THUMB2_KERNEL only, fixups are split into halfwords in case of misalignment, since we can't rely on unaligned accesses working before turning the MMU on. No attempt is made to optimise the aligned case, since the number of fixups is typically small, and it seems best to keep the code as simple as possible. * Add a rotate in the fixup_smp code in order to support CPU_BIG_ENDIAN, as suggested by Nicolas Pitre. * Add an assembly-time sanity-check to ALT_UP() to ensure that the content really is the right size (4 bytes). (No check is done for ALT_SMP(). Possibly, this could be fixed by splitting the two uses ot ALT_SMP() (ALT_SMP...SMP_UP versus ALT_SMP...SMP_UP_B) into two macros. In the first case, ALT_SMP needs to expand to >= 4 bytes, not == 4.) * smp_mpidr.h (which implements ALT_SMP()/ALT_UP() manually due to macro limitations) has not been modified: the affected instruction (mov) has no 16-bit encoding, so the correct instruction size is satisfied in this case. * A "mode" parameter has been added to smp_dmb: smp_dmb arm @ assumes 4-byte instructions (for ARM code, e.g. kuser) smp_dmb @ uses W() to ensure 4-byte instructions for ALT_SMP() This avoids assembly failures due to use of W() inside smp_dmb, when assembling pure-ARM code in the vectors page. There might be a better way to achieve this. * Kconfig: make SMP_ON_UP depend on (!THUMB2_KERNEL || !BIG_ENDIAN) i.e., THUMB2_KERNEL is now supported, but only if !BIG_ENDIAN (The fixup code for Thumb-2 currently assumes little-endian order.) Tested using a single generic realview kernel on: ARM RealView PB-A8 (CONFIG_THUMB2_KERNEL={n,y}) ARM RealView PBX-A9 (SMP) Signed-off-by: Dave Martin <dave.martin@linaro.org> Acked-by: Nicolas Pitre <nicolas.pitre@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-12-01 22:39:23 +08:00
.if . - 9997b != 4 ;\
.error "ALT_UP() content must assemble to exactly 4 bytes";\
.endif ;\
ARM: Allow SMP kernels to boot on UP systems UP systems do not implement all the instructions that SMP systems have, so in order to boot a SMP kernel on a UP system, we need to rewrite parts of the kernel. Do this using an 'alternatives' scheme, where the kernel code and data is modified prior to initialization to replace the SMP instructions, thereby rendering the problematical code ineffectual. We use the linker to generate a list of 32-bit word locations and their replacement values, and run through these replacements when we detect a UP system. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-09-04 17:47:48 +08:00
.popsection
#define ALT_UP_B(label) \
.equ up_b_offset, label - 9998b ;\
.pushsection ".alt.smp.init", "a" ;\
.long 9998b ;\
ARM: 6516/1: Allow SMP_ON_UP to work with Thumb-2 kernels. * __fixup_smp_on_up has been modified with support for the THUMB2_KERNEL case. For THUMB2_KERNEL only, fixups are split into halfwords in case of misalignment, since we can't rely on unaligned accesses working before turning the MMU on. No attempt is made to optimise the aligned case, since the number of fixups is typically small, and it seems best to keep the code as simple as possible. * Add a rotate in the fixup_smp code in order to support CPU_BIG_ENDIAN, as suggested by Nicolas Pitre. * Add an assembly-time sanity-check to ALT_UP() to ensure that the content really is the right size (4 bytes). (No check is done for ALT_SMP(). Possibly, this could be fixed by splitting the two uses ot ALT_SMP() (ALT_SMP...SMP_UP versus ALT_SMP...SMP_UP_B) into two macros. In the first case, ALT_SMP needs to expand to >= 4 bytes, not == 4.) * smp_mpidr.h (which implements ALT_SMP()/ALT_UP() manually due to macro limitations) has not been modified: the affected instruction (mov) has no 16-bit encoding, so the correct instruction size is satisfied in this case. * A "mode" parameter has been added to smp_dmb: smp_dmb arm @ assumes 4-byte instructions (for ARM code, e.g. kuser) smp_dmb @ uses W() to ensure 4-byte instructions for ALT_SMP() This avoids assembly failures due to use of W() inside smp_dmb, when assembling pure-ARM code in the vectors page. There might be a better way to achieve this. * Kconfig: make SMP_ON_UP depend on (!THUMB2_KERNEL || !BIG_ENDIAN) i.e., THUMB2_KERNEL is now supported, but only if !BIG_ENDIAN (The fixup code for Thumb-2 currently assumes little-endian order.) Tested using a single generic realview kernel on: ARM RealView PB-A8 (CONFIG_THUMB2_KERNEL={n,y}) ARM RealView PBX-A9 (SMP) Signed-off-by: Dave Martin <dave.martin@linaro.org> Acked-by: Nicolas Pitre <nicolas.pitre@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-12-01 22:39:23 +08:00
W(b) . + up_b_offset ;\
ARM: Allow SMP kernels to boot on UP systems UP systems do not implement all the instructions that SMP systems have, so in order to boot a SMP kernel on a UP system, we need to rewrite parts of the kernel. Do this using an 'alternatives' scheme, where the kernel code and data is modified prior to initialization to replace the SMP instructions, thereby rendering the problematical code ineffectual. We use the linker to generate a list of 32-bit word locations and their replacement values, and run through these replacements when we detect a UP system. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-09-04 17:47:48 +08:00
.popsection
#else
#define ALT_SMP(instr...)
#define ALT_UP(instr...) instr
#define ALT_UP_B(label) b label
#endif
ARM: LPAE: add ISBs around MMU enabling code Before we enable the MMU, we must ensure that the TTBR registers contain sane values. After the MMU has been enabled, we jump to the *virtual* address of the following function, so we also need to ensure that the SCTLR write has taken effect. This patch adds ISB instructions around the SCTLR write to ensure the visibility of the above. Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2011-11-23 01:30:28 +08:00
/*
* Instruction barrier
*/
.macro instr_sync
#if __LINUX_ARM_ARCH__ >= 7
isb
#elif __LINUX_ARM_ARCH__ == 6
mcr p15, 0, r0, c7, c5, 4
#endif
.endm
[ARM] barriers: improve xchg, bitops and atomic SMP barriers Mathieu Desnoyers pointed out that the ARM barriers were lacking: - cmpxchg, xchg and atomic add return need memory barriers on architectures which can reorder the relative order in which memory read/writes can be seen between CPUs, which seems to include recent ARM architectures. Those barriers are currently missing on ARM. - test_and_xxx_bit were missing SMP barriers. So put these barriers in. Provide separate atomic_add/atomic_sub operations which do not require barriers. Reported-Reviewed-and-Acked-by: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-05-26 03:58:00 +08:00
/*
* SMP data memory barrier
*/
ARM: 6516/1: Allow SMP_ON_UP to work with Thumb-2 kernels. * __fixup_smp_on_up has been modified with support for the THUMB2_KERNEL case. For THUMB2_KERNEL only, fixups are split into halfwords in case of misalignment, since we can't rely on unaligned accesses working before turning the MMU on. No attempt is made to optimise the aligned case, since the number of fixups is typically small, and it seems best to keep the code as simple as possible. * Add a rotate in the fixup_smp code in order to support CPU_BIG_ENDIAN, as suggested by Nicolas Pitre. * Add an assembly-time sanity-check to ALT_UP() to ensure that the content really is the right size (4 bytes). (No check is done for ALT_SMP(). Possibly, this could be fixed by splitting the two uses ot ALT_SMP() (ALT_SMP...SMP_UP versus ALT_SMP...SMP_UP_B) into two macros. In the first case, ALT_SMP needs to expand to >= 4 bytes, not == 4.) * smp_mpidr.h (which implements ALT_SMP()/ALT_UP() manually due to macro limitations) has not been modified: the affected instruction (mov) has no 16-bit encoding, so the correct instruction size is satisfied in this case. * A "mode" parameter has been added to smp_dmb: smp_dmb arm @ assumes 4-byte instructions (for ARM code, e.g. kuser) smp_dmb @ uses W() to ensure 4-byte instructions for ALT_SMP() This avoids assembly failures due to use of W() inside smp_dmb, when assembling pure-ARM code in the vectors page. There might be a better way to achieve this. * Kconfig: make SMP_ON_UP depend on (!THUMB2_KERNEL || !BIG_ENDIAN) i.e., THUMB2_KERNEL is now supported, but only if !BIG_ENDIAN (The fixup code for Thumb-2 currently assumes little-endian order.) Tested using a single generic realview kernel on: ARM RealView PB-A8 (CONFIG_THUMB2_KERNEL={n,y}) ARM RealView PBX-A9 (SMP) Signed-off-by: Dave Martin <dave.martin@linaro.org> Acked-by: Nicolas Pitre <nicolas.pitre@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-12-01 22:39:23 +08:00
.macro smp_dmb mode
[ARM] barriers: improve xchg, bitops and atomic SMP barriers Mathieu Desnoyers pointed out that the ARM barriers were lacking: - cmpxchg, xchg and atomic add return need memory barriers on architectures which can reorder the relative order in which memory read/writes can be seen between CPUs, which seems to include recent ARM architectures. Those barriers are currently missing on ARM. - test_and_xxx_bit were missing SMP barriers. So put these barriers in. Provide separate atomic_add/atomic_sub operations which do not require barriers. Reported-Reviewed-and-Acked-by: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-05-26 03:58:00 +08:00
#ifdef CONFIG_SMP
#if __LINUX_ARM_ARCH__ >= 7
ARM: 6516/1: Allow SMP_ON_UP to work with Thumb-2 kernels. * __fixup_smp_on_up has been modified with support for the THUMB2_KERNEL case. For THUMB2_KERNEL only, fixups are split into halfwords in case of misalignment, since we can't rely on unaligned accesses working before turning the MMU on. No attempt is made to optimise the aligned case, since the number of fixups is typically small, and it seems best to keep the code as simple as possible. * Add a rotate in the fixup_smp code in order to support CPU_BIG_ENDIAN, as suggested by Nicolas Pitre. * Add an assembly-time sanity-check to ALT_UP() to ensure that the content really is the right size (4 bytes). (No check is done for ALT_SMP(). Possibly, this could be fixed by splitting the two uses ot ALT_SMP() (ALT_SMP...SMP_UP versus ALT_SMP...SMP_UP_B) into two macros. In the first case, ALT_SMP needs to expand to >= 4 bytes, not == 4.) * smp_mpidr.h (which implements ALT_SMP()/ALT_UP() manually due to macro limitations) has not been modified: the affected instruction (mov) has no 16-bit encoding, so the correct instruction size is satisfied in this case. * A "mode" parameter has been added to smp_dmb: smp_dmb arm @ assumes 4-byte instructions (for ARM code, e.g. kuser) smp_dmb @ uses W() to ensure 4-byte instructions for ALT_SMP() This avoids assembly failures due to use of W() inside smp_dmb, when assembling pure-ARM code in the vectors page. There might be a better way to achieve this. * Kconfig: make SMP_ON_UP depend on (!THUMB2_KERNEL || !BIG_ENDIAN) i.e., THUMB2_KERNEL is now supported, but only if !BIG_ENDIAN (The fixup code for Thumb-2 currently assumes little-endian order.) Tested using a single generic realview kernel on: ARM RealView PB-A8 (CONFIG_THUMB2_KERNEL={n,y}) ARM RealView PBX-A9 (SMP) Signed-off-by: Dave Martin <dave.martin@linaro.org> Acked-by: Nicolas Pitre <nicolas.pitre@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-12-01 22:39:23 +08:00
.ifeqs "\mode","arm"
ARM: barrier: allow options to be passed to memory barrier instructions On ARMv7, the memory barrier instructions take an optional `option' field which can be used to constrain the effects of a memory barrier based on shareability and access type. This patch allows the caller to pass these options if required, and updates the smp_*() barriers to request inner-shareable barriers, affecting only stores for the _wmb variant. wmb() is also changed to use the -st version of dsb. Reported-by: Albin Tonnerre <albin.tonnerre@arm.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2013-05-11 01:07:19 +08:00
ALT_SMP(dmb ish)
ARM: 6516/1: Allow SMP_ON_UP to work with Thumb-2 kernels. * __fixup_smp_on_up has been modified with support for the THUMB2_KERNEL case. For THUMB2_KERNEL only, fixups are split into halfwords in case of misalignment, since we can't rely on unaligned accesses working before turning the MMU on. No attempt is made to optimise the aligned case, since the number of fixups is typically small, and it seems best to keep the code as simple as possible. * Add a rotate in the fixup_smp code in order to support CPU_BIG_ENDIAN, as suggested by Nicolas Pitre. * Add an assembly-time sanity-check to ALT_UP() to ensure that the content really is the right size (4 bytes). (No check is done for ALT_SMP(). Possibly, this could be fixed by splitting the two uses ot ALT_SMP() (ALT_SMP...SMP_UP versus ALT_SMP...SMP_UP_B) into two macros. In the first case, ALT_SMP needs to expand to >= 4 bytes, not == 4.) * smp_mpidr.h (which implements ALT_SMP()/ALT_UP() manually due to macro limitations) has not been modified: the affected instruction (mov) has no 16-bit encoding, so the correct instruction size is satisfied in this case. * A "mode" parameter has been added to smp_dmb: smp_dmb arm @ assumes 4-byte instructions (for ARM code, e.g. kuser) smp_dmb @ uses W() to ensure 4-byte instructions for ALT_SMP() This avoids assembly failures due to use of W() inside smp_dmb, when assembling pure-ARM code in the vectors page. There might be a better way to achieve this. * Kconfig: make SMP_ON_UP depend on (!THUMB2_KERNEL || !BIG_ENDIAN) i.e., THUMB2_KERNEL is now supported, but only if !BIG_ENDIAN (The fixup code for Thumb-2 currently assumes little-endian order.) Tested using a single generic realview kernel on: ARM RealView PB-A8 (CONFIG_THUMB2_KERNEL={n,y}) ARM RealView PBX-A9 (SMP) Signed-off-by: Dave Martin <dave.martin@linaro.org> Acked-by: Nicolas Pitre <nicolas.pitre@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-12-01 22:39:23 +08:00
.else
ARM: barrier: allow options to be passed to memory barrier instructions On ARMv7, the memory barrier instructions take an optional `option' field which can be used to constrain the effects of a memory barrier based on shareability and access type. This patch allows the caller to pass these options if required, and updates the smp_*() barriers to request inner-shareable barriers, affecting only stores for the _wmb variant. wmb() is also changed to use the -st version of dsb. Reported-by: Albin Tonnerre <albin.tonnerre@arm.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2013-05-11 01:07:19 +08:00
ALT_SMP(W(dmb) ish)
ARM: 6516/1: Allow SMP_ON_UP to work with Thumb-2 kernels. * __fixup_smp_on_up has been modified with support for the THUMB2_KERNEL case. For THUMB2_KERNEL only, fixups are split into halfwords in case of misalignment, since we can't rely on unaligned accesses working before turning the MMU on. No attempt is made to optimise the aligned case, since the number of fixups is typically small, and it seems best to keep the code as simple as possible. * Add a rotate in the fixup_smp code in order to support CPU_BIG_ENDIAN, as suggested by Nicolas Pitre. * Add an assembly-time sanity-check to ALT_UP() to ensure that the content really is the right size (4 bytes). (No check is done for ALT_SMP(). Possibly, this could be fixed by splitting the two uses ot ALT_SMP() (ALT_SMP...SMP_UP versus ALT_SMP...SMP_UP_B) into two macros. In the first case, ALT_SMP needs to expand to >= 4 bytes, not == 4.) * smp_mpidr.h (which implements ALT_SMP()/ALT_UP() manually due to macro limitations) has not been modified: the affected instruction (mov) has no 16-bit encoding, so the correct instruction size is satisfied in this case. * A "mode" parameter has been added to smp_dmb: smp_dmb arm @ assumes 4-byte instructions (for ARM code, e.g. kuser) smp_dmb @ uses W() to ensure 4-byte instructions for ALT_SMP() This avoids assembly failures due to use of W() inside smp_dmb, when assembling pure-ARM code in the vectors page. There might be a better way to achieve this. * Kconfig: make SMP_ON_UP depend on (!THUMB2_KERNEL || !BIG_ENDIAN) i.e., THUMB2_KERNEL is now supported, but only if !BIG_ENDIAN (The fixup code for Thumb-2 currently assumes little-endian order.) Tested using a single generic realview kernel on: ARM RealView PB-A8 (CONFIG_THUMB2_KERNEL={n,y}) ARM RealView PBX-A9 (SMP) Signed-off-by: Dave Martin <dave.martin@linaro.org> Acked-by: Nicolas Pitre <nicolas.pitre@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-12-01 22:39:23 +08:00
.endif
[ARM] barriers: improve xchg, bitops and atomic SMP barriers Mathieu Desnoyers pointed out that the ARM barriers were lacking: - cmpxchg, xchg and atomic add return need memory barriers on architectures which can reorder the relative order in which memory read/writes can be seen between CPUs, which seems to include recent ARM architectures. Those barriers are currently missing on ARM. - test_and_xxx_bit were missing SMP barriers. So put these barriers in. Provide separate atomic_add/atomic_sub operations which do not require barriers. Reported-Reviewed-and-Acked-by: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-05-26 03:58:00 +08:00
#elif __LINUX_ARM_ARCH__ == 6
ARM: Allow SMP kernels to boot on UP systems UP systems do not implement all the instructions that SMP systems have, so in order to boot a SMP kernel on a UP system, we need to rewrite parts of the kernel. Do this using an 'alternatives' scheme, where the kernel code and data is modified prior to initialization to replace the SMP instructions, thereby rendering the problematical code ineffectual. We use the linker to generate a list of 32-bit word locations and their replacement values, and run through these replacements when we detect a UP system. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-09-04 17:47:48 +08:00
ALT_SMP(mcr p15, 0, r0, c7, c10, 5) @ dmb
#else
#error Incompatible SMP platform
[ARM] barriers: improve xchg, bitops and atomic SMP barriers Mathieu Desnoyers pointed out that the ARM barriers were lacking: - cmpxchg, xchg and atomic add return need memory barriers on architectures which can reorder the relative order in which memory read/writes can be seen between CPUs, which seems to include recent ARM architectures. Those barriers are currently missing on ARM. - test_and_xxx_bit were missing SMP barriers. So put these barriers in. Provide separate atomic_add/atomic_sub operations which do not require barriers. Reported-Reviewed-and-Acked-by: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-05-26 03:58:00 +08:00
#endif
ARM: 6516/1: Allow SMP_ON_UP to work with Thumb-2 kernels. * __fixup_smp_on_up has been modified with support for the THUMB2_KERNEL case. For THUMB2_KERNEL only, fixups are split into halfwords in case of misalignment, since we can't rely on unaligned accesses working before turning the MMU on. No attempt is made to optimise the aligned case, since the number of fixups is typically small, and it seems best to keep the code as simple as possible. * Add a rotate in the fixup_smp code in order to support CPU_BIG_ENDIAN, as suggested by Nicolas Pitre. * Add an assembly-time sanity-check to ALT_UP() to ensure that the content really is the right size (4 bytes). (No check is done for ALT_SMP(). Possibly, this could be fixed by splitting the two uses ot ALT_SMP() (ALT_SMP...SMP_UP versus ALT_SMP...SMP_UP_B) into two macros. In the first case, ALT_SMP needs to expand to >= 4 bytes, not == 4.) * smp_mpidr.h (which implements ALT_SMP()/ALT_UP() manually due to macro limitations) has not been modified: the affected instruction (mov) has no 16-bit encoding, so the correct instruction size is satisfied in this case. * A "mode" parameter has been added to smp_dmb: smp_dmb arm @ assumes 4-byte instructions (for ARM code, e.g. kuser) smp_dmb @ uses W() to ensure 4-byte instructions for ALT_SMP() This avoids assembly failures due to use of W() inside smp_dmb, when assembling pure-ARM code in the vectors page. There might be a better way to achieve this. * Kconfig: make SMP_ON_UP depend on (!THUMB2_KERNEL || !BIG_ENDIAN) i.e., THUMB2_KERNEL is now supported, but only if !BIG_ENDIAN (The fixup code for Thumb-2 currently assumes little-endian order.) Tested using a single generic realview kernel on: ARM RealView PB-A8 (CONFIG_THUMB2_KERNEL={n,y}) ARM RealView PBX-A9 (SMP) Signed-off-by: Dave Martin <dave.martin@linaro.org> Acked-by: Nicolas Pitre <nicolas.pitre@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-12-01 22:39:23 +08:00
.ifeqs "\mode","arm"
ARM: Allow SMP kernels to boot on UP systems UP systems do not implement all the instructions that SMP systems have, so in order to boot a SMP kernel on a UP system, we need to rewrite parts of the kernel. Do this using an 'alternatives' scheme, where the kernel code and data is modified prior to initialization to replace the SMP instructions, thereby rendering the problematical code ineffectual. We use the linker to generate a list of 32-bit word locations and their replacement values, and run through these replacements when we detect a UP system. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-09-04 17:47:48 +08:00
ALT_UP(nop)
ARM: 6516/1: Allow SMP_ON_UP to work with Thumb-2 kernels. * __fixup_smp_on_up has been modified with support for the THUMB2_KERNEL case. For THUMB2_KERNEL only, fixups are split into halfwords in case of misalignment, since we can't rely on unaligned accesses working before turning the MMU on. No attempt is made to optimise the aligned case, since the number of fixups is typically small, and it seems best to keep the code as simple as possible. * Add a rotate in the fixup_smp code in order to support CPU_BIG_ENDIAN, as suggested by Nicolas Pitre. * Add an assembly-time sanity-check to ALT_UP() to ensure that the content really is the right size (4 bytes). (No check is done for ALT_SMP(). Possibly, this could be fixed by splitting the two uses ot ALT_SMP() (ALT_SMP...SMP_UP versus ALT_SMP...SMP_UP_B) into two macros. In the first case, ALT_SMP needs to expand to >= 4 bytes, not == 4.) * smp_mpidr.h (which implements ALT_SMP()/ALT_UP() manually due to macro limitations) has not been modified: the affected instruction (mov) has no 16-bit encoding, so the correct instruction size is satisfied in this case. * A "mode" parameter has been added to smp_dmb: smp_dmb arm @ assumes 4-byte instructions (for ARM code, e.g. kuser) smp_dmb @ uses W() to ensure 4-byte instructions for ALT_SMP() This avoids assembly failures due to use of W() inside smp_dmb, when assembling pure-ARM code in the vectors page. There might be a better way to achieve this. * Kconfig: make SMP_ON_UP depend on (!THUMB2_KERNEL || !BIG_ENDIAN) i.e., THUMB2_KERNEL is now supported, but only if !BIG_ENDIAN (The fixup code for Thumb-2 currently assumes little-endian order.) Tested using a single generic realview kernel on: ARM RealView PB-A8 (CONFIG_THUMB2_KERNEL={n,y}) ARM RealView PBX-A9 (SMP) Signed-off-by: Dave Martin <dave.martin@linaro.org> Acked-by: Nicolas Pitre <nicolas.pitre@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-12-01 22:39:23 +08:00
.else
ALT_UP(W(nop))
.endif
[ARM] barriers: improve xchg, bitops and atomic SMP barriers Mathieu Desnoyers pointed out that the ARM barriers were lacking: - cmpxchg, xchg and atomic add return need memory barriers on architectures which can reorder the relative order in which memory read/writes can be seen between CPUs, which seems to include recent ARM architectures. Those barriers are currently missing on ARM. - test_and_xxx_bit were missing SMP barriers. So put these barriers in. Provide separate atomic_add/atomic_sub operations which do not require barriers. Reported-Reviewed-and-Acked-by: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-05-26 03:58:00 +08:00
#endif
.endm
Thumb-2: Implementation of the unified start-up and exceptions code This patch implements the ARM/Thumb-2 unified kernel start-up and exception handling code. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2009-07-24 19:32:54 +08:00
ARM: Add base support for ARMv7-M This patch adds the base support for the ARMv7-M architecture. It consists of the corresponding arch/arm/mm/ files and various #ifdef's around the kernel. Exception handling is implemented by a subsequent patch. [ukleinek: squash in some changes originating from commit b5717ba (Cortex-M3: Add support for the Microcontroller Prototyping System) from the v2.6.33-arm1 patch stack, port to post 3.6, drop zImage support, drop reorganisation of pt_regs, assert CONFIG_CPU_V7M doesn't leak into installed headers and a few cosmetic changes] Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Reviewed-by: Jonathan Austin <jonathan.austin@arm.com> Tested-by: Jonathan Austin <jonathan.austin@arm.com> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-05-22 01:06:41 +08:00
#if defined(CONFIG_CPU_V7M)
/*
* setmode is used to assert to be in svc mode during boot. For v7-M
* this is done in __v7m_setup, so setmode can be empty here.
*/
.macro setmode, mode, reg
.endm
#elif defined(CONFIG_THUMB2_KERNEL)
Thumb-2: Implementation of the unified start-up and exceptions code This patch implements the ARM/Thumb-2 unified kernel start-up and exception handling code. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2009-07-24 19:32:54 +08:00
.macro setmode, mode, reg
mov \reg, #\mode
msr cpsr_c, \reg
.endm
#else
.macro setmode, mode, reg
msr cpsr_c, #\mode
.endm
#endif
Thumb-2: Implement the unified arch/arm/lib functions This patch adds the ARM/Thumb-2 unified support for the arch/arm/lib/* files. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2009-07-24 19:32:57 +08:00
ARM: virt: allow the kernel to be entered in HYP mode This patch does two things: * Ensure that asynchronous aborts are masked at kernel entry. The bootloader should be masking these anyway, but this reduces the damage window just in case it doesn't. * Enter svc mode via exception return to ensure that CPU state is properly serialised. This does not matter when switching from an ordinary privileged mode ("PL1" modes in ARMv7-AR rev C parlance), but it potentially does matter when switching from a another privileged mode such as hyp mode. This should allow the kernel to boot safely either from svc mode or hyp mode, even if no support for use of the ARM Virtualization Extensions is built into the kernel. Signed-off-by: Dave Martin <dave.martin@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2012-02-10 00:47:17 +08:00
/*
* Helper macro to enter SVC mode cleanly and mask interrupts. reg is
* a scratch register for the macro to overwrite.
*
* This macro is intended for forcing the CPU into SVC mode at boot time.
* you cannot return to the original mode.
*/
.macro safe_svcmode_maskall reg:req
ARM: 8053/1: kernel: sleep: restore HYP mode configuration in cpu_resume On CPUs with virtualization extensions the kernel installs HYP mode configuration on both primary and secondary cpus upon cold boot. On platforms where CPUs are shutdown in idle paths (ie CPU core gating), when a CPU resumes from low-power states it currently does not execute code that reinstalls the HYP configuration, which means that the kernel cannot run eg KVM properly on such machines. This patch, mirroring cold-boot behaviour, executes position independent code that reinstalls HYP configuration and drops to SVC mode safely on warmboot, so that deep idle states can be enabled in kernel running as hosts on platforms with power management HW. Cc: Christoffer Dall <christoffer.dall@linaro.org> Cc: Dave Martin <dave.martin@arm.com> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Nicolas Pitre <nico@linaro.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Reviewed-by: Dave Martin <Dave.Martin@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2014-05-09 00:31:40 +08:00
#if __LINUX_ARM_ARCH__ >= 6 && !defined(CONFIG_CPU_V7M)
ARM: virt: allow the kernel to be entered in HYP mode This patch does two things: * Ensure that asynchronous aborts are masked at kernel entry. The bootloader should be masking these anyway, but this reduces the damage window just in case it doesn't. * Enter svc mode via exception return to ensure that CPU state is properly serialised. This does not matter when switching from an ordinary privileged mode ("PL1" modes in ARMv7-AR rev C parlance), but it potentially does matter when switching from a another privileged mode such as hyp mode. This should allow the kernel to boot safely either from svc mode or hyp mode, even if no support for use of the ARM Virtualization Extensions is built into the kernel. Signed-off-by: Dave Martin <dave.martin@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2012-02-10 00:47:17 +08:00
mrs \reg , cpsr
ARM: virt: avoid clobbering lr when forcing svc mode The safe_svcmode_maskall macro is used to ensure that we are running in svc mode, causing an exception return from hvc mode if required. This patch removes the unneeded lr clobber from the macro and operates entirely on the temporary parameter register instead. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> [will: updated comment] Signed-off-by: Will Deacon <will.deacon@arm.com>
2012-12-03 23:39:43 +08:00
eor \reg, \reg, #HYP_MODE
tst \reg, #MODE_MASK
ARM: virt: allow the kernel to be entered in HYP mode This patch does two things: * Ensure that asynchronous aborts are masked at kernel entry. The bootloader should be masking these anyway, but this reduces the damage window just in case it doesn't. * Enter svc mode via exception return to ensure that CPU state is properly serialised. This does not matter when switching from an ordinary privileged mode ("PL1" modes in ARMv7-AR rev C parlance), but it potentially does matter when switching from a another privileged mode such as hyp mode. This should allow the kernel to boot safely either from svc mode or hyp mode, even if no support for use of the ARM Virtualization Extensions is built into the kernel. Signed-off-by: Dave Martin <dave.martin@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2012-02-10 00:47:17 +08:00
bic \reg , \reg , #MODE_MASK
ARM: virt: avoid clobbering lr when forcing svc mode The safe_svcmode_maskall macro is used to ensure that we are running in svc mode, causing an exception return from hvc mode if required. This patch removes the unneeded lr clobber from the macro and operates entirely on the temporary parameter register instead. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> [will: updated comment] Signed-off-by: Will Deacon <will.deacon@arm.com>
2012-12-03 23:39:43 +08:00
orr \reg , \reg , #PSR_I_BIT | PSR_F_BIT | SVC_MODE
ARM: virt: allow the kernel to be entered in HYP mode This patch does two things: * Ensure that asynchronous aborts are masked at kernel entry. The bootloader should be masking these anyway, but this reduces the damage window just in case it doesn't. * Enter svc mode via exception return to ensure that CPU state is properly serialised. This does not matter when switching from an ordinary privileged mode ("PL1" modes in ARMv7-AR rev C parlance), but it potentially does matter when switching from a another privileged mode such as hyp mode. This should allow the kernel to boot safely either from svc mode or hyp mode, even if no support for use of the ARM Virtualization Extensions is built into the kernel. Signed-off-by: Dave Martin <dave.martin@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2012-02-10 00:47:17 +08:00
THUMB( orr \reg , \reg , #PSR_T_BIT )
bne 1f
ARM: 7549/1: HYP: fix boot on some ARM1136 cores It appears that performing a "movs pc, lr" to force the kernel into SVC mode on the OMAP2420 (ARM1136) prevents the platform from booting correctly (change introduced in 80c59da [ARM: virt: allow the kernel to be entered in HYP mode]). While the reason it fails is not understood yet (the same code runs fine on the OMAP2430, ARM1136 as well), partially revert that change for platforms that do not enter in HYP mode, preserving the new feature and restoring a working kernel on the OMAP2420. Reported-by: Tony Lindgren <tony@atomide.com> Acked-by: Nicolas Pitre <nico@linaro.org> Tested-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-10-07 00:03:17 +08:00
orr \reg, \reg, #PSR_A_BIT
ARM: replace BSYM() with badr assembly macro BSYM() was invented to allow us to work around a problem with the assembler, where local symbols resolved by the assembler for the 'adr' instruction did not take account of their ISA. Since we don't want BSYM() used elsewhere, replace BSYM() with a new macro 'badr', which is like the 'adr' pseudo-op, but with the BSYM() mechanics integrated into it. This ensures that the BSYM()-ification is only used in conjunction with 'adr'. Acked-by: Dave Martin <Dave.Martin@arm.com> Acked-by: Nicolas Pitre <nico@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2015-04-21 21:17:25 +08:00
badr lr, 2f
ARM: 7549/1: HYP: fix boot on some ARM1136 cores It appears that performing a "movs pc, lr" to force the kernel into SVC mode on the OMAP2420 (ARM1136) prevents the platform from booting correctly (change introduced in 80c59da [ARM: virt: allow the kernel to be entered in HYP mode]). While the reason it fails is not understood yet (the same code runs fine on the OMAP2430, ARM1136 as well), partially revert that change for platforms that do not enter in HYP mode, preserving the new feature and restoring a working kernel on the OMAP2420. Reported-by: Tony Lindgren <tony@atomide.com> Acked-by: Nicolas Pitre <nico@linaro.org> Tested-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-10-07 00:03:17 +08:00
msr spsr_cxsf, \reg
ARM: virt: allow the kernel to be entered in HYP mode This patch does two things: * Ensure that asynchronous aborts are masked at kernel entry. The bootloader should be masking these anyway, but this reduces the damage window just in case it doesn't. * Enter svc mode via exception return to ensure that CPU state is properly serialised. This does not matter when switching from an ordinary privileged mode ("PL1" modes in ARMv7-AR rev C parlance), but it potentially does matter when switching from a another privileged mode such as hyp mode. This should allow the kernel to boot safely either from svc mode or hyp mode, even if no support for use of the ARM Virtualization Extensions is built into the kernel. Signed-off-by: Dave Martin <dave.martin@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2012-02-10 00:47:17 +08:00
__MSR_ELR_HYP(14)
__ERET
ARM: 7549/1: HYP: fix boot on some ARM1136 cores It appears that performing a "movs pc, lr" to force the kernel into SVC mode on the OMAP2420 (ARM1136) prevents the platform from booting correctly (change introduced in 80c59da [ARM: virt: allow the kernel to be entered in HYP mode]). While the reason it fails is not understood yet (the same code runs fine on the OMAP2430, ARM1136 as well), partially revert that change for platforms that do not enter in HYP mode, preserving the new feature and restoring a working kernel on the OMAP2420. Reported-by: Tony Lindgren <tony@atomide.com> Acked-by: Nicolas Pitre <nico@linaro.org> Tested-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-10-07 00:03:17 +08:00
1: msr cpsr_c, \reg
ARM: virt: allow the kernel to be entered in HYP mode This patch does two things: * Ensure that asynchronous aborts are masked at kernel entry. The bootloader should be masking these anyway, but this reduces the damage window just in case it doesn't. * Enter svc mode via exception return to ensure that CPU state is properly serialised. This does not matter when switching from an ordinary privileged mode ("PL1" modes in ARMv7-AR rev C parlance), but it potentially does matter when switching from a another privileged mode such as hyp mode. This should allow the kernel to boot safely either from svc mode or hyp mode, even if no support for use of the ARM Virtualization Extensions is built into the kernel. Signed-off-by: Dave Martin <dave.martin@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2012-02-10 00:47:17 +08:00
2:
ARM: 7599/1: head: Remove boot-time HYP mode check for v5 and below The kernel can only be entered on HYP mode on CPUs which actually support it, i.e. >= ARMv7. pre-v6 platform support cannot coexist in the same kernel as support for v7 and higher, so there is no advantage in having the HYP mode check on pre-v6 hardware. At least one pre-v6 board is known to fail when the HYP mode check code is present, although the exact cause remains unknown and may be unrelated. [1] This patch restores the old behaviour for pre-v6 platforms, whereby the CPSR is forced directly to SVC mode with IRQs and FIQs masked. All kernels capable of booting on v7 hardware will retain the check, so this should not impair functionality. [1] http://lists.arm.linux.org.uk/lurker/message/20121130.013814.19218413.en.html ([ARM] head.S change broke platform device registration?) Signed-off-by: Dave Martin <dave.martin@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-12-11 01:35:22 +08:00
#else
/*
* workaround for possibly broken pre-v6 hardware
* (akita, Sharp Zaurus C-1000, PXA270-based)
*/
setmode PSR_F_BIT | PSR_I_BIT | SVC_MODE, \reg
#endif
ARM: virt: allow the kernel to be entered in HYP mode This patch does two things: * Ensure that asynchronous aborts are masked at kernel entry. The bootloader should be masking these anyway, but this reduces the damage window just in case it doesn't. * Enter svc mode via exception return to ensure that CPU state is properly serialised. This does not matter when switching from an ordinary privileged mode ("PL1" modes in ARMv7-AR rev C parlance), but it potentially does matter when switching from a another privileged mode such as hyp mode. This should allow the kernel to boot safely either from svc mode or hyp mode, even if no support for use of the ARM Virtualization Extensions is built into the kernel. Signed-off-by: Dave Martin <dave.martin@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2012-02-10 00:47:17 +08:00
.endm
Thumb-2: Implement the unified arch/arm/lib functions This patch adds the ARM/Thumb-2 unified support for the arch/arm/lib/* files. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2009-07-24 19:32:57 +08:00
/*
* STRT/LDRT access macros with ARM and Thumb-2 variants
*/
#ifdef CONFIG_THUMB2_KERNEL
ARM: 7301/1: Rename the T() macro to TUSER() to avoid namespace conflicts This macro is used to generate unprivileged accesses (LDRT/STRT) to user space. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Nicolas Pitre <nico@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-01-25 18:38:13 +08:00
.macro usraccoff, instr, reg, ptr, inc, off, cond, abort, t=TUSER()
Thumb-2: Implement the unified arch/arm/lib functions This patch adds the ARM/Thumb-2 unified support for the arch/arm/lib/* files. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2009-07-24 19:32:57 +08:00
9999:
.if \inc == 1
ARM: 6384/1: Remove the domain switching on ARMv6k/v7 CPUs This patch removes the domain switching functionality via the set_fs and __switch_to functions on cores that have a TLS register. Currently, the ioremap and vmalloc areas share the same level 1 page tables and therefore have the same domain (DOMAIN_KERNEL). When the kernel domain is modified from Client to Manager (via the __set_fs or in the __switch_to function), the XN (eXecute Never) bit is overridden and newer CPUs can speculatively prefetch the ioremap'ed memory. Linux performs the kernel domain switching to allow user-specific functions (copy_to/from_user, get/put_user etc.) to access kernel memory. In order for these functions to work with the kernel domain set to Client, the patch modifies the LDRT/STRT and related instructions to the LDR/STR ones. The user pages access rights are also modified for kernel read-only access rather than read/write so that the copy-on-write mechanism still works. CPU_USE_DOMAINS gets disabled only if the hardware has a TLS register (CPU_32v6K is defined) since writing the TLS value to the high vectors page isn't possible. The user addresses passed to the kernel are checked by the access_ok() function so that they do not point to the kernel space. Tested-by: Anton Vorontsov <cbouatmailru@gmail.com> Cc: Tony Lindgren <tony@atomide.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-09-13 23:03:21 +08:00
\instr\cond\()b\()\t\().w \reg, [\ptr, #\off]
Thumb-2: Implement the unified arch/arm/lib functions This patch adds the ARM/Thumb-2 unified support for the arch/arm/lib/* files. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2009-07-24 19:32:57 +08:00
.elseif \inc == 4
ARM: 6384/1: Remove the domain switching on ARMv6k/v7 CPUs This patch removes the domain switching functionality via the set_fs and __switch_to functions on cores that have a TLS register. Currently, the ioremap and vmalloc areas share the same level 1 page tables and therefore have the same domain (DOMAIN_KERNEL). When the kernel domain is modified from Client to Manager (via the __set_fs or in the __switch_to function), the XN (eXecute Never) bit is overridden and newer CPUs can speculatively prefetch the ioremap'ed memory. Linux performs the kernel domain switching to allow user-specific functions (copy_to/from_user, get/put_user etc.) to access kernel memory. In order for these functions to work with the kernel domain set to Client, the patch modifies the LDRT/STRT and related instructions to the LDR/STR ones. The user pages access rights are also modified for kernel read-only access rather than read/write so that the copy-on-write mechanism still works. CPU_USE_DOMAINS gets disabled only if the hardware has a TLS register (CPU_32v6K is defined) since writing the TLS value to the high vectors page isn't possible. The user addresses passed to the kernel are checked by the access_ok() function so that they do not point to the kernel space. Tested-by: Anton Vorontsov <cbouatmailru@gmail.com> Cc: Tony Lindgren <tony@atomide.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-09-13 23:03:21 +08:00
\instr\cond\()\t\().w \reg, [\ptr, #\off]
Thumb-2: Implement the unified arch/arm/lib functions This patch adds the ARM/Thumb-2 unified support for the arch/arm/lib/* files. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2009-07-24 19:32:57 +08:00
.else
.error "Unsupported inc macro argument"
.endif
ARM: fix build error in arch/arm/kernel/process.c /tmp/ccJ3ssZW.s: Assembler messages: /tmp/ccJ3ssZW.s:1952: Error: can't resolve `.text' {.text section} - `.LFB1077' This is caused because: .section .data .section .text .section .text .previous does not return us to the .text section, but the .data section; this makes use of .previous dangerous if the ordering of previous sections is not known. Fix up the other users of .previous; .pushsection and .popsection are a safer pairing to use than .section and .previous. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-04-19 17:15:03 +08:00
.pushsection __ex_table,"a"
Thumb-2: Implement the unified arch/arm/lib functions This patch adds the ARM/Thumb-2 unified support for the arch/arm/lib/* files. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2009-07-24 19:32:57 +08:00
.align 3
.long 9999b, \abort
ARM: fix build error in arch/arm/kernel/process.c /tmp/ccJ3ssZW.s: Assembler messages: /tmp/ccJ3ssZW.s:1952: Error: can't resolve `.text' {.text section} - `.LFB1077' This is caused because: .section .data .section .text .section .text .previous does not return us to the .text section, but the .data section; this makes use of .previous dangerous if the ordering of previous sections is not known. Fix up the other users of .previous; .pushsection and .popsection are a safer pairing to use than .section and .previous. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-04-19 17:15:03 +08:00
.popsection
Thumb-2: Implement the unified arch/arm/lib functions This patch adds the ARM/Thumb-2 unified support for the arch/arm/lib/* files. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2009-07-24 19:32:57 +08:00
.endm
.macro usracc, instr, reg, ptr, inc, cond, rept, abort
@ explicit IT instruction needed because of the label
@ introduced by the USER macro
.ifnc \cond,al
.if \rept == 1
itt \cond
.elseif \rept == 2
ittt \cond
.else
.error "Unsupported rept macro argument"
.endif
.endif
@ Slightly optimised to avoid incrementing the pointer twice
usraccoff \instr, \reg, \ptr, \inc, 0, \cond, \abort
.if \rept == 2
ARM: 6489/1: thumb2: fix incorrect optimisation in usracc Commit 8b592783 added a Thumb-2 variant of usracc which, when it is called with \rept=2, calls usraccoff once with an offset of 0 and secondly with a hard-coded offset of 4 in order to avoid incrementing the pointer again. If \inc != 4 then we will store the data to the wrong offset from \ptr. Luckily, the only caller that passes \rept=2 to this function is __clear_user so we haven't been actively corrupting user data. This patch fixes usracc to pass \inc instead of #4 to usraccoff when it is called a second time. Cc: <stable@kernel.org> Reported-by: Tony Thompson <tony.thompson@arm.com> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-11-19 20:18:31 +08:00
usraccoff \instr, \reg, \ptr, \inc, \inc, \cond, \abort
Thumb-2: Implement the unified arch/arm/lib functions This patch adds the ARM/Thumb-2 unified support for the arch/arm/lib/* files. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2009-07-24 19:32:57 +08:00
.endif
add\cond \ptr, #\rept * \inc
.endm
#else /* !CONFIG_THUMB2_KERNEL */
ARM: 7301/1: Rename the T() macro to TUSER() to avoid namespace conflicts This macro is used to generate unprivileged accesses (LDRT/STRT) to user space. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Nicolas Pitre <nico@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-01-25 18:38:13 +08:00
.macro usracc, instr, reg, ptr, inc, cond, rept, abort, t=TUSER()
Thumb-2: Implement the unified arch/arm/lib functions This patch adds the ARM/Thumb-2 unified support for the arch/arm/lib/* files. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2009-07-24 19:32:57 +08:00
.rept \rept
9999:
.if \inc == 1
ARM: 6384/1: Remove the domain switching on ARMv6k/v7 CPUs This patch removes the domain switching functionality via the set_fs and __switch_to functions on cores that have a TLS register. Currently, the ioremap and vmalloc areas share the same level 1 page tables and therefore have the same domain (DOMAIN_KERNEL). When the kernel domain is modified from Client to Manager (via the __set_fs or in the __switch_to function), the XN (eXecute Never) bit is overridden and newer CPUs can speculatively prefetch the ioremap'ed memory. Linux performs the kernel domain switching to allow user-specific functions (copy_to/from_user, get/put_user etc.) to access kernel memory. In order for these functions to work with the kernel domain set to Client, the patch modifies the LDRT/STRT and related instructions to the LDR/STR ones. The user pages access rights are also modified for kernel read-only access rather than read/write so that the copy-on-write mechanism still works. CPU_USE_DOMAINS gets disabled only if the hardware has a TLS register (CPU_32v6K is defined) since writing the TLS value to the high vectors page isn't possible. The user addresses passed to the kernel are checked by the access_ok() function so that they do not point to the kernel space. Tested-by: Anton Vorontsov <cbouatmailru@gmail.com> Cc: Tony Lindgren <tony@atomide.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-09-13 23:03:21 +08:00
\instr\cond\()b\()\t \reg, [\ptr], #\inc
Thumb-2: Implement the unified arch/arm/lib functions This patch adds the ARM/Thumb-2 unified support for the arch/arm/lib/* files. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2009-07-24 19:32:57 +08:00
.elseif \inc == 4
ARM: 6384/1: Remove the domain switching on ARMv6k/v7 CPUs This patch removes the domain switching functionality via the set_fs and __switch_to functions on cores that have a TLS register. Currently, the ioremap and vmalloc areas share the same level 1 page tables and therefore have the same domain (DOMAIN_KERNEL). When the kernel domain is modified from Client to Manager (via the __set_fs or in the __switch_to function), the XN (eXecute Never) bit is overridden and newer CPUs can speculatively prefetch the ioremap'ed memory. Linux performs the kernel domain switching to allow user-specific functions (copy_to/from_user, get/put_user etc.) to access kernel memory. In order for these functions to work with the kernel domain set to Client, the patch modifies the LDRT/STRT and related instructions to the LDR/STR ones. The user pages access rights are also modified for kernel read-only access rather than read/write so that the copy-on-write mechanism still works. CPU_USE_DOMAINS gets disabled only if the hardware has a TLS register (CPU_32v6K is defined) since writing the TLS value to the high vectors page isn't possible. The user addresses passed to the kernel are checked by the access_ok() function so that they do not point to the kernel space. Tested-by: Anton Vorontsov <cbouatmailru@gmail.com> Cc: Tony Lindgren <tony@atomide.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-09-13 23:03:21 +08:00
\instr\cond\()\t \reg, [\ptr], #\inc
Thumb-2: Implement the unified arch/arm/lib functions This patch adds the ARM/Thumb-2 unified support for the arch/arm/lib/* files. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2009-07-24 19:32:57 +08:00
.else
.error "Unsupported inc macro argument"
.endif
ARM: fix build error in arch/arm/kernel/process.c /tmp/ccJ3ssZW.s: Assembler messages: /tmp/ccJ3ssZW.s:1952: Error: can't resolve `.text' {.text section} - `.LFB1077' This is caused because: .section .data .section .text .section .text .previous does not return us to the .text section, but the .data section; this makes use of .previous dangerous if the ordering of previous sections is not known. Fix up the other users of .previous; .pushsection and .popsection are a safer pairing to use than .section and .previous. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-04-19 17:15:03 +08:00
.pushsection __ex_table,"a"
Thumb-2: Implement the unified arch/arm/lib functions This patch adds the ARM/Thumb-2 unified support for the arch/arm/lib/* files. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2009-07-24 19:32:57 +08:00
.align 3
.long 9999b, \abort
ARM: fix build error in arch/arm/kernel/process.c /tmp/ccJ3ssZW.s: Assembler messages: /tmp/ccJ3ssZW.s:1952: Error: can't resolve `.text' {.text section} - `.LFB1077' This is caused because: .section .data .section .text .section .text .previous does not return us to the .text section, but the .data section; this makes use of .previous dangerous if the ordering of previous sections is not known. Fix up the other users of .previous; .pushsection and .popsection are a safer pairing to use than .section and .previous. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-04-19 17:15:03 +08:00
.popsection
Thumb-2: Implement the unified arch/arm/lib functions This patch adds the ARM/Thumb-2 unified support for the arch/arm/lib/* files. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2009-07-24 19:32:57 +08:00
.endr
.endm
#endif /* CONFIG_THUMB2_KERNEL */
.macro strusr, reg, ptr, inc, cond=al, rept=1, abort=9001f
usracc str, \reg, \ptr, \inc, \cond, \rept, \abort
.endm
.macro ldrusr, reg, ptr, inc, cond=al, rept=1, abort=9001f
usracc ldr, \reg, \ptr, \inc, \cond, \rept, \abort
.endm
ARM: assembler.h: Add string declaration macro Declaring strings in assembler source involves a certain amount of tedious boilerplate code in order to annotate the resulting symbol correctly. Encapsulating this boilerplate in a macro should help to avoid some duplication and the occasional mistake. Signed-off-by: Dave Martin <dave.martin@linaro.org> Acked-by: Nicolas Pitre <nicolas.pitre@linaro.org>
2011-06-24 00:10:05 +08:00
/* Utility macro for declaring string literals */
.macro string name:req, string
.type \name , #object
\name:
.asciz "\string"
.size \name , . - \name
.endm
ARM: 7527/1: uaccess: explicitly check __user pointer when !CPU_USE_DOMAINS The {get,put}_user macros don't perform range checking on the provided __user address when !CPU_HAS_DOMAINS. This patch reworks the out-of-line assembly accessors to check the user address against a specified limit, returning -EFAULT if is is out of range. [will: changed get_user register allocation to match put_user] [rmk: fixed building on older ARM architectures] Reported-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com> Cc: stable@vger.kernel.org Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-09-08 01:22:28 +08:00
.macro check_uaccess, addr:req, size:req, limit:req, tmp:req, bad:req
#ifndef CONFIG_CPU_USE_DOMAINS
adds \tmp, \addr, #\size - 1
sbcccs \tmp, \tmp, \limit
bcs \bad
#endif
.endm
ARM: entry: provide uaccess assembly macro hooks Provide hooks into the kernel entry and exit paths to permit control of userspace visibility to the kernel. The intended use is: - on entry to kernel from user, uaccess_disable will be called to disable userspace visibility - on exit from kernel to user, uaccess_enable will be called to enable userspace visibility - on entry from a kernel exception, uaccess_save_and_disable will be called to save the current userspace visibility setting, and disable access - on exit from a kernel exception, uaccess_restore will be called to restore the userspace visibility as it was before the exception occurred. These hooks allows us to keep userspace visibility disabled for the vast majority of the kernel, except for localised regions where we want to explicitly access userspace. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2015-08-20 17:32:02 +08:00
.macro uaccess_disable, tmp, isb=1
ARM: software-based priviledged-no-access support Provide a software-based implementation of the priviledged no access support found in ARMv8.1. Userspace pages are mapped using a different domain number from the kernel and IO mappings. If we switch the user domain to "no access" when we enter the kernel, we can prevent the kernel from touching userspace. However, the kernel needs to be able to access userspace via the various user accessor functions. With the wrapping in the previous patch, we can temporarily enable access when the kernel needs user access, and re-disable it afterwards. This allows us to trap non-intended accesses to userspace, eg, caused by an inadvertent dereference of the LIST_POISON* values, which, with appropriate user mappings setup, can be made to succeed. This in turn can allow use-after-free bugs to be further exploited than would otherwise be possible. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2015-08-20 03:40:41 +08:00
#ifdef CONFIG_CPU_SW_DOMAIN_PAN
/*
* Whenever we re-enter userspace, the domains should always be
* set appropriately.
*/
mov \tmp, #DACR_UACCESS_DISABLE
mcr p15, 0, \tmp, c3, c0, 0 @ Set domain register
.if \isb
instr_sync
.endif
#endif
ARM: entry: provide uaccess assembly macro hooks Provide hooks into the kernel entry and exit paths to permit control of userspace visibility to the kernel. The intended use is: - on entry to kernel from user, uaccess_disable will be called to disable userspace visibility - on exit from kernel to user, uaccess_enable will be called to enable userspace visibility - on entry from a kernel exception, uaccess_save_and_disable will be called to save the current userspace visibility setting, and disable access - on exit from a kernel exception, uaccess_restore will be called to restore the userspace visibility as it was before the exception occurred. These hooks allows us to keep userspace visibility disabled for the vast majority of the kernel, except for localised regions where we want to explicitly access userspace. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2015-08-20 17:32:02 +08:00
.endm
.macro uaccess_enable, tmp, isb=1
ARM: software-based priviledged-no-access support Provide a software-based implementation of the priviledged no access support found in ARMv8.1. Userspace pages are mapped using a different domain number from the kernel and IO mappings. If we switch the user domain to "no access" when we enter the kernel, we can prevent the kernel from touching userspace. However, the kernel needs to be able to access userspace via the various user accessor functions. With the wrapping in the previous patch, we can temporarily enable access when the kernel needs user access, and re-disable it afterwards. This allows us to trap non-intended accesses to userspace, eg, caused by an inadvertent dereference of the LIST_POISON* values, which, with appropriate user mappings setup, can be made to succeed. This in turn can allow use-after-free bugs to be further exploited than would otherwise be possible. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2015-08-20 03:40:41 +08:00
#ifdef CONFIG_CPU_SW_DOMAIN_PAN
/*
* Whenever we re-enter userspace, the domains should always be
* set appropriately.
*/
mov \tmp, #DACR_UACCESS_ENABLE
mcr p15, 0, \tmp, c3, c0, 0
.if \isb
instr_sync
.endif
#endif
ARM: entry: provide uaccess assembly macro hooks Provide hooks into the kernel entry and exit paths to permit control of userspace visibility to the kernel. The intended use is: - on entry to kernel from user, uaccess_disable will be called to disable userspace visibility - on exit from kernel to user, uaccess_enable will be called to enable userspace visibility - on entry from a kernel exception, uaccess_save_and_disable will be called to save the current userspace visibility setting, and disable access - on exit from a kernel exception, uaccess_restore will be called to restore the userspace visibility as it was before the exception occurred. These hooks allows us to keep userspace visibility disabled for the vast majority of the kernel, except for localised regions where we want to explicitly access userspace. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2015-08-20 17:32:02 +08:00
.endm
.macro uaccess_save, tmp
ARM: software-based priviledged-no-access support Provide a software-based implementation of the priviledged no access support found in ARMv8.1. Userspace pages are mapped using a different domain number from the kernel and IO mappings. If we switch the user domain to "no access" when we enter the kernel, we can prevent the kernel from touching userspace. However, the kernel needs to be able to access userspace via the various user accessor functions. With the wrapping in the previous patch, we can temporarily enable access when the kernel needs user access, and re-disable it afterwards. This allows us to trap non-intended accesses to userspace, eg, caused by an inadvertent dereference of the LIST_POISON* values, which, with appropriate user mappings setup, can be made to succeed. This in turn can allow use-after-free bugs to be further exploited than would otherwise be possible. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2015-08-20 03:40:41 +08:00
#ifdef CONFIG_CPU_SW_DOMAIN_PAN
mrc p15, 0, \tmp, c3, c0, 0
ARM: introduce svc_pt_regs structure Since the privileged mode pt_regs are an extended version of the saved userland pt_regs, introduce a new svc_pt_regs structure to describe this layout. Acked-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2016-05-13 17:22:38 +08:00
str \tmp, [sp, #SVC_DACR]
ARM: software-based priviledged-no-access support Provide a software-based implementation of the priviledged no access support found in ARMv8.1. Userspace pages are mapped using a different domain number from the kernel and IO mappings. If we switch the user domain to "no access" when we enter the kernel, we can prevent the kernel from touching userspace. However, the kernel needs to be able to access userspace via the various user accessor functions. With the wrapping in the previous patch, we can temporarily enable access when the kernel needs user access, and re-disable it afterwards. This allows us to trap non-intended accesses to userspace, eg, caused by an inadvertent dereference of the LIST_POISON* values, which, with appropriate user mappings setup, can be made to succeed. This in turn can allow use-after-free bugs to be further exploited than would otherwise be possible. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2015-08-20 03:40:41 +08:00
#endif
ARM: entry: provide uaccess assembly macro hooks Provide hooks into the kernel entry and exit paths to permit control of userspace visibility to the kernel. The intended use is: - on entry to kernel from user, uaccess_disable will be called to disable userspace visibility - on exit from kernel to user, uaccess_enable will be called to enable userspace visibility - on entry from a kernel exception, uaccess_save_and_disable will be called to save the current userspace visibility setting, and disable access - on exit from a kernel exception, uaccess_restore will be called to restore the userspace visibility as it was before the exception occurred. These hooks allows us to keep userspace visibility disabled for the vast majority of the kernel, except for localised regions where we want to explicitly access userspace. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2015-08-20 17:32:02 +08:00
.endm
.macro uaccess_restore
ARM: software-based priviledged-no-access support Provide a software-based implementation of the priviledged no access support found in ARMv8.1. Userspace pages are mapped using a different domain number from the kernel and IO mappings. If we switch the user domain to "no access" when we enter the kernel, we can prevent the kernel from touching userspace. However, the kernel needs to be able to access userspace via the various user accessor functions. With the wrapping in the previous patch, we can temporarily enable access when the kernel needs user access, and re-disable it afterwards. This allows us to trap non-intended accesses to userspace, eg, caused by an inadvertent dereference of the LIST_POISON* values, which, with appropriate user mappings setup, can be made to succeed. This in turn can allow use-after-free bugs to be further exploited than would otherwise be possible. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2015-08-20 03:40:41 +08:00
#ifdef CONFIG_CPU_SW_DOMAIN_PAN
ARM: introduce svc_pt_regs structure Since the privileged mode pt_regs are an extended version of the saved userland pt_regs, introduce a new svc_pt_regs structure to describe this layout. Acked-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2016-05-13 17:22:38 +08:00
ldr r0, [sp, #SVC_DACR]
ARM: software-based priviledged-no-access support Provide a software-based implementation of the priviledged no access support found in ARMv8.1. Userspace pages are mapped using a different domain number from the kernel and IO mappings. If we switch the user domain to "no access" when we enter the kernel, we can prevent the kernel from touching userspace. However, the kernel needs to be able to access userspace via the various user accessor functions. With the wrapping in the previous patch, we can temporarily enable access when the kernel needs user access, and re-disable it afterwards. This allows us to trap non-intended accesses to userspace, eg, caused by an inadvertent dereference of the LIST_POISON* values, which, with appropriate user mappings setup, can be made to succeed. This in turn can allow use-after-free bugs to be further exploited than would otherwise be possible. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2015-08-20 03:40:41 +08:00
mcr p15, 0, r0, c3, c0, 0
#endif
ARM: entry: provide uaccess assembly macro hooks Provide hooks into the kernel entry and exit paths to permit control of userspace visibility to the kernel. The intended use is: - on entry to kernel from user, uaccess_disable will be called to disable userspace visibility - on exit from kernel to user, uaccess_enable will be called to enable userspace visibility - on entry from a kernel exception, uaccess_save_and_disable will be called to save the current userspace visibility setting, and disable access - on exit from a kernel exception, uaccess_restore will be called to restore the userspace visibility as it was before the exception occurred. These hooks allows us to keep userspace visibility disabled for the vast majority of the kernel, except for localised regions where we want to explicitly access userspace. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2015-08-20 17:32:02 +08:00
.endm
ARM: convert all "mov.* pc, reg" to "bx reg" for ARMv6+ ARMv6 and greater introduced a new instruction ("bx") which can be used to return from function calls. Recent CPUs perform better when the "bx lr" instruction is used rather than the "mov pc, lr" instruction, and this sequence is strongly recommended to be used by the ARM architecture manual (section A.4.1.1). We provide a new macro "ret" with all its variants for the condition code which will resolve to the appropriate instruction. Rather than doing this piecemeal, and miss some instances, change all the "mov pc" instances to use the new macro, with the exception of the "movs" instruction and the kprobes code. This allows us to detect the "mov pc, lr" case and fix it up - and also gives us the possibility of deploying this for other registers depending on the CPU selection. Reported-by: Will Deacon <will.deacon@arm.com> Tested-by: Stephen Warren <swarren@nvidia.com> # Tegra Jetson TK1 Tested-by: Robert Jarzmik <robert.jarzmik@free.fr> # mioa701_bootresume.S Tested-by: Andrew Lunn <andrew@lunn.ch> # Kirkwood Tested-by: Shawn Guo <shawn.guo@freescale.com> Tested-by: Tony Lindgren <tony@atomide.com> # OMAPs Tested-by: Gregory CLEMENT <gregory.clement@free-electrons.com> # Armada XP, 375, 385 Acked-by: Sekhar Nori <nsekhar@ti.com> # DaVinci Acked-by: Christoffer Dall <christoffer.dall@linaro.org> # kvm/hyp Acked-by: Haojian Zhuang <haojian.zhuang@gmail.com> # PXA3xx Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> # Xen Tested-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> # ARMv7M Tested-by: Simon Horman <horms+renesas@verge.net.au> # Shmobile Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2014-06-30 23:29:12 +08:00
.irp c,,eq,ne,cs,cc,mi,pl,vs,vc,hi,ls,ge,lt,gt,le,hs,lo
.macro ret\c, reg
#if __LINUX_ARM_ARCH__ < 6
mov\c pc, \reg
#else
.ifeqs "\reg", "lr"
bx\c \reg
.else
mov\c pc, \reg
.endif
#endif
.endm
.endr
.macro ret.w, reg
ret \reg
#ifdef CONFIG_THUMB2_KERNEL
nop
#endif
.endm
ARM: 6959/1: SMP build fix for entry-macro-multi.S The assembly code in entry-macro-multi.S does not build without the include asm/assembler.h in the case of CONFIG_SMP=y. Fixes the rather theoretical SMP build of mach-shmobile/entry-intc.c: arch/arm/include/asm/entry-macro-multi.S: Assembler messages: arch/arm/include/asm/entry-macro-multi.S:20: Error: bad instruction `alt_smp(test_for_ipi r0,r6,r5,lr)' arch/arm/include/asm/entry-macro-multi.S:20: Error: bad instruction `alt_up_b(9997f)' make[1]: *** [arch/arm/mach-shmobile/entry-intc.o] Error 1 make: *** [arch/arm/mach-shmobile] Error 2 make: *** Waiting for unfinished jobs.... Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-06-13 13:46:44 +08:00
#endif /* __ASM_ASSEMBLER_H__ */