OpenCloudOS-Kernel/arch/m68k/include/asm/div64.h

37 lines
858 B
C
Raw Normal View History

License cleanup: add SPDX GPL-2.0 license identifier to files with no license Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-01 22:07:57 +08:00
/* SPDX-License-Identifier: GPL-2.0 */
#ifndef _M68K_DIV64_H
#define _M68K_DIV64_H
#ifdef CONFIG_CPU_HAS_NO_MULDIV64
#include <asm-generic/div64.h>
#else
#include <linux/types.h>
/* n = n / base; return rem; */
#define do_div(n, base) ({ \
union { \
unsigned long n32[2]; \
unsigned long long n64; \
} __n; \
unsigned long __rem, __upper; \
m68k: Truncate base in do_div() Explicitly truncate the second operand of do_div() to 32 bits to guard against bogus code calling it with a 64-bit divisor. [Thorsten] After upgrading from 3.2 to 3.10, mounting a btrfs volume fails with: btrfs: setting nodatacow, compression disabled btrfs: enabling auto recovery btrfs: disk space caching is enabled *** ZERO DIVIDE *** FORMAT=2 Current process id is 722 BAD KERNEL TRAP: 00000000 Modules linked in: evdev mac_hid ext4 crc16 jbd2 mbcache btrfs xor lzo_compress zlib_deflate raid6_pq crc32c libcrc32c PC: [<319535b2>] __btrfs_map_block+0x11c/0x119a [btrfs] SR: 2000 SP: 30c1fab4 a2: 30f0faf0 d0: 00000000 d1: 00001000 d2: 00000000 d3: 00000000 d4: 00010000 d5: 00000000 a0: 3085c72c a1: 3085c72c Process mount (pid: 722, task=30f0faf0) Frame format=2 instr addr=319535ae Stack from 30c1faec: 00000000 00000020 00000000 00001000 00000000 01401000 30253928 300ffc00 00a843ac 3026f640 00000000 00010000 0009e250 00d106c0 00011220 00000000 00001000 301c6830 0009e32a 000000ff 00000009 3085c72c 00000000 00000000 30c1fd14 00000000 00000020 00000000 30c1fd14 0009e26c 00000020 00000003 00000000 0009dd8a 300b0b6c 30253928 00a843ac 00001000 00000000 00000000 0000a008 3194e76a 30253928 00a843ac 00001000 00000000 00000000 00000002 Call Trace: [<00001000>] kernel_pg_dir+0x0/0x1000 [...] Code: 222e ff74 2a2e ff5c 2c2e ff60 4c45 1402 <2d40> ff64 2d41 ff68 2205 4c2e 1800 ff68 4c04 0800 2041 d1c0 2206 4c2e 1400 ff68 [Geert] As diagnosed by Andreas, fs/btrfs/volumes.c:__btrfs_map_block() calls do_div(stripe_nr, stripe_len); with stripe_len u64, while do_div() assumes the divisor is a 32-bit number. Due to the lack of truncation in the m68k-specific implementation of do_div(), the division is performed using the upper 32-bit word of stripe_len, which is zero. This was introduced by commit 53b381b3abeb86f12787a6c40fee9b2f71edc23b ("Btrfs: RAID5 and RAID6"), which changed the divisor from map->stripe_len (struct map_lookup.stripe_len is int) to a 64-bit temporary. Reported-by: Thorsten Glaser <tg@debian.org> Signed-off-by: Andreas Schwab <schwab@linux-m68k.org> Tested-by: Thorsten Glaser <tg@debian.org> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Cc: stable@vger.kernel.org
2013-08-09 21:14:08 +08:00
unsigned long __base = (base); \
\
__n.n64 = (n); \
if ((__upper = __n.n32[0])) { \
asm ("divul.l %2,%1:%0" \
m68k: Truncate base in do_div() Explicitly truncate the second operand of do_div() to 32 bits to guard against bogus code calling it with a 64-bit divisor. [Thorsten] After upgrading from 3.2 to 3.10, mounting a btrfs volume fails with: btrfs: setting nodatacow, compression disabled btrfs: enabling auto recovery btrfs: disk space caching is enabled *** ZERO DIVIDE *** FORMAT=2 Current process id is 722 BAD KERNEL TRAP: 00000000 Modules linked in: evdev mac_hid ext4 crc16 jbd2 mbcache btrfs xor lzo_compress zlib_deflate raid6_pq crc32c libcrc32c PC: [<319535b2>] __btrfs_map_block+0x11c/0x119a [btrfs] SR: 2000 SP: 30c1fab4 a2: 30f0faf0 d0: 00000000 d1: 00001000 d2: 00000000 d3: 00000000 d4: 00010000 d5: 00000000 a0: 3085c72c a1: 3085c72c Process mount (pid: 722, task=30f0faf0) Frame format=2 instr addr=319535ae Stack from 30c1faec: 00000000 00000020 00000000 00001000 00000000 01401000 30253928 300ffc00 00a843ac 3026f640 00000000 00010000 0009e250 00d106c0 00011220 00000000 00001000 301c6830 0009e32a 000000ff 00000009 3085c72c 00000000 00000000 30c1fd14 00000000 00000020 00000000 30c1fd14 0009e26c 00000020 00000003 00000000 0009dd8a 300b0b6c 30253928 00a843ac 00001000 00000000 00000000 0000a008 3194e76a 30253928 00a843ac 00001000 00000000 00000000 00000002 Call Trace: [<00001000>] kernel_pg_dir+0x0/0x1000 [...] Code: 222e ff74 2a2e ff5c 2c2e ff60 4c45 1402 <2d40> ff64 2d41 ff68 2205 4c2e 1800 ff68 4c04 0800 2041 d1c0 2206 4c2e 1400 ff68 [Geert] As diagnosed by Andreas, fs/btrfs/volumes.c:__btrfs_map_block() calls do_div(stripe_nr, stripe_len); with stripe_len u64, while do_div() assumes the divisor is a 32-bit number. Due to the lack of truncation in the m68k-specific implementation of do_div(), the division is performed using the upper 32-bit word of stripe_len, which is zero. This was introduced by commit 53b381b3abeb86f12787a6c40fee9b2f71edc23b ("Btrfs: RAID5 and RAID6"), which changed the divisor from map->stripe_len (struct map_lookup.stripe_len is int) to a 64-bit temporary. Reported-by: Thorsten Glaser <tg@debian.org> Signed-off-by: Andreas Schwab <schwab@linux-m68k.org> Tested-by: Thorsten Glaser <tg@debian.org> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Cc: stable@vger.kernel.org
2013-08-09 21:14:08 +08:00
: "=d" (__n.n32[0]), "=d" (__upper) \
: "d" (__base), "0" (__n.n32[0])); \
} \
asm ("divu.l %2,%1:%0" \
m68k: Truncate base in do_div() Explicitly truncate the second operand of do_div() to 32 bits to guard against bogus code calling it with a 64-bit divisor. [Thorsten] After upgrading from 3.2 to 3.10, mounting a btrfs volume fails with: btrfs: setting nodatacow, compression disabled btrfs: enabling auto recovery btrfs: disk space caching is enabled *** ZERO DIVIDE *** FORMAT=2 Current process id is 722 BAD KERNEL TRAP: 00000000 Modules linked in: evdev mac_hid ext4 crc16 jbd2 mbcache btrfs xor lzo_compress zlib_deflate raid6_pq crc32c libcrc32c PC: [<319535b2>] __btrfs_map_block+0x11c/0x119a [btrfs] SR: 2000 SP: 30c1fab4 a2: 30f0faf0 d0: 00000000 d1: 00001000 d2: 00000000 d3: 00000000 d4: 00010000 d5: 00000000 a0: 3085c72c a1: 3085c72c Process mount (pid: 722, task=30f0faf0) Frame format=2 instr addr=319535ae Stack from 30c1faec: 00000000 00000020 00000000 00001000 00000000 01401000 30253928 300ffc00 00a843ac 3026f640 00000000 00010000 0009e250 00d106c0 00011220 00000000 00001000 301c6830 0009e32a 000000ff 00000009 3085c72c 00000000 00000000 30c1fd14 00000000 00000020 00000000 30c1fd14 0009e26c 00000020 00000003 00000000 0009dd8a 300b0b6c 30253928 00a843ac 00001000 00000000 00000000 0000a008 3194e76a 30253928 00a843ac 00001000 00000000 00000000 00000002 Call Trace: [<00001000>] kernel_pg_dir+0x0/0x1000 [...] Code: 222e ff74 2a2e ff5c 2c2e ff60 4c45 1402 <2d40> ff64 2d41 ff68 2205 4c2e 1800 ff68 4c04 0800 2041 d1c0 2206 4c2e 1400 ff68 [Geert] As diagnosed by Andreas, fs/btrfs/volumes.c:__btrfs_map_block() calls do_div(stripe_nr, stripe_len); with stripe_len u64, while do_div() assumes the divisor is a 32-bit number. Due to the lack of truncation in the m68k-specific implementation of do_div(), the division is performed using the upper 32-bit word of stripe_len, which is zero. This was introduced by commit 53b381b3abeb86f12787a6c40fee9b2f71edc23b ("Btrfs: RAID5 and RAID6"), which changed the divisor from map->stripe_len (struct map_lookup.stripe_len is int) to a 64-bit temporary. Reported-by: Thorsten Glaser <tg@debian.org> Signed-off-by: Andreas Schwab <schwab@linux-m68k.org> Tested-by: Thorsten Glaser <tg@debian.org> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Cc: stable@vger.kernel.org
2013-08-09 21:14:08 +08:00
: "=d" (__n.n32[1]), "=d" (__rem) \
: "d" (__base), "1" (__upper), "0" (__n.n32[1])); \
(n) = __n.n64; \
__rem; \
})
#endif /* CONFIG_CPU_HAS_NO_MULDIV64 */
#endif /* _M68K_DIV64_H */