OpenCloudOS-Kernel/drivers/gpu/drm/i915/intel_uncore.c

1906 lines
50 KiB
C
Raw Normal View History

/*
* Copyright © 2013 Intel Corporation
*
* Permission is hereby granted, free of charge, to any person obtaining a
* copy of this software and associated documentation files (the "Software"),
* to deal in the Software without restriction, including without limitation
* the rights to use, copy, modify, merge, publish, distribute, sublicense,
* and/or sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice (including the next
* paragraph) shall be included in all copies or substantial portions of the
* Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
* THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS
* IN THE SOFTWARE.
*/
#include "i915_drv.h"
#include "intel_drv.h"
drm/i915: Introduce a PV INFO page structure for Intel GVT-g. Introduce a PV INFO structure, to facilitate the Intel GVT-g technology, which is a GPU virtualization solution with mediated pass-through. This page contains the shared information between i915 driver and the host emulator. For now, this structure utilizes an area of 4K bytes on HSW GPU's unused MMIO space. Future hardware will have the reserved window architecturally defined, and layout of the page will be added in future BSpec. The i915 driver load routine detects if it is running in a VM by reading the contents of this PV INFO page. Thereafter a flag, vgpu.active is set, and intel_vgpu_active() is used by checking this flag to conclude if GPU is virtualized with Intel GVT-g. By now, intel_vgpu_active() will return true, only when the driver is running as a guest in the Intel GVT-g enhanced environment on HSW platform. v2: take Chris' comments: - call the i915_check_vgpu() in intel_uncore_init() - sanitize i915_check_vgpu() by adding BUILD_BUG_ON() and debug info take Daniel's comments: - put the definition of PV INFO into a new header - i915_vgt_if.h other changes: - access mmio regs by readq/readw in i915_check_vgpu() v3: take Daniel's comments: - move the i915/vgt interfaces into a new i915_vgpu.c - update makefile - add kerneldoc to functions which are non-static - add a DOC: section describing some of the high-level design - update drm docbook other changes: - rename i915_vgt_if.h to i915_vgpu.h v4: take Tvrtko's comments: - fix a typo in commit message - add debug message when vgt version mismatches - rename low_gmadr/high_gmadr to mappable/non-mappable in PV INFO structure Signed-off-by: Yu Zhang <yu.c.zhang@linux.intel.com> Signed-off-by: Jike Song <jike.song@intel.com> Signed-off-by: Eddie Dong <eddie.dong@intel.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-02-10 19:05:47 +08:00
#include "i915_vgpu.h"
#include <linux/pm_runtime.h>
#define FORCEWAKE_ACK_TIMEOUT_MS 50
#define __raw_posting_read(dev_priv__, reg__) (void)__raw_i915_read32((dev_priv__), (reg__))
static const char * const forcewake_domain_names[] = {
"render",
"blitter",
"media",
};
const char *
intel_uncore_forcewake_domain_to_str(const enum forcewake_domain_id id)
{
BUILD_BUG_ON(ARRAY_SIZE(forcewake_domain_names) != FW_DOMAIN_ID_COUNT);
if (id >= 0 && id < FW_DOMAIN_ID_COUNT)
return forcewake_domain_names[id];
WARN_ON(id);
return "unknown";
}
static inline void
fw_domain_reset(const struct intel_uncore_forcewake_domain *d)
{
drm/i915: Type safe register read/write Make I915_READ and I915_WRITE more type safe by wrapping the register offset in a struct. This should eliminate most of the fumbles we've had with misplaced parens. This only takes care of normal mmio registers. We could extend the idea to other register types and define each with its own struct. That way you wouldn't be able to accidentally pass the wrong thing to a specific register access function. The gpio_reg setup is probably the ugliest thing left. But I figure I'd just leave it for now, and wait for some divine inspiration to strike before making it nice. As for the generated code, it's actually a bit better sometimes. Eg. looking at i915_irq_handler(), we can see the following change: lea 0x70024(%rdx,%rax,1),%r9d mov $0x1,%edx - movslq %r9d,%r9 - mov %r9,%rsi - mov %r9,-0x58(%rbp) - callq *0xd8(%rbx) + mov %r9d,%esi + mov %r9d,-0x48(%rbp) callq *0xd8(%rbx) So previously gcc thought the register offset might be signed and decided to sign extend it, just in case. The rest appears to be mostly just minor shuffling of instructions. v2: i915_mmio_reg_{offset,equal,valid}() helpers added s/_REG/_MMIO/ in the register defines mo more switch statements left to worry about ring_emit stuff got sorted in a prep patch cmd parser, lrc context and w/a batch buildup also in prep patch vgpu stuff cleaned up and moved to a prep patch all other unrelated changes split out v3: Rebased due to BXT DSI/BLC, MOCS, etc. v4: Rebased due to churn, s/i915_mmio_reg_t/i915_reg_t/ Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Link: http://patchwork.freedesktop.org/patch/msgid/1447853606-2751-1-git-send-email-ville.syrjala@linux.intel.com
2015-11-18 21:33:26 +08:00
WARN_ON(!i915_mmio_reg_valid(d->reg_set));
__raw_i915_write32(d->i915, d->reg_set, d->val_reset);
}
static inline void
fw_domain_arm_timer(struct intel_uncore_forcewake_domain *d)
{
drm/i915: Use consistent forcewake auto-release timeout across kernel configs Because it is based on jiffies, current implementation releases the forcewake at any time between straight away and between 1ms and 10ms, depending on the kernel configuration (CONFIG_HZ). This is probably not what has been desired, since the dynamics of keeping parts of the GPU awake should not be correlated with this kernel configuration parameter. Change the auto-release mechanism to use hrtimers and set the timeout to 1ms with a 1ms of slack. This should make the GPU power consistent across kernel configs, and timer slack should enable some timer coalescing where multiple force-wake domains exist, or with unrelated timers. For GlBench/T-Rex this decreases the number of forcewake releases from ~480 to ~300 per second, and for a heavy combined OGL/OCL test from ~670 to ~360 (HZ=1000 kernel). Even though this reduction can be attributed to the average release period extending from 0-1ms to 1-2ms, as discussed above, it will make the forcewake timeout consistent for different CONFIG_HZ values. Real life measurements with the above workload has shown that, with this patch, both manage to auto-release the forcewake between 2-4 times per 10ms, even though the number of forcewake gets is dramatically different. T-Rex requests between 5-10 explicit gets and 5-10 implict gets in each 10ms period, while the OGL/OCL test requests 250 and 380 times in the same period. The two data points together suggest that the nature of the forwake accesses is bursty and that further changes and potential timeout extensions, or moving the start of timeout from the first to the last automatic forcewake grab, should be carefully measured for power and performance effects. v2: * Commit spelling. (Dave Gordon) * More discussion on numbers in the commit. (Chris Wilson) Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: Dave Gordon <david.s.gordon@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
2016-04-08 00:04:32 +08:00
d->wake_count++;
hrtimer_start_range_ns(&d->timer,
ktime_set(0, NSEC_PER_MSEC),
NSEC_PER_MSEC,
HRTIMER_MODE_REL);
}
static inline void
fw_domain_wait_ack_clear(const struct intel_uncore_forcewake_domain *d)
{
if (wait_for_atomic((__raw_i915_read32(d->i915, d->reg_ack) &
FORCEWAKE_KERNEL) == 0,
FORCEWAKE_ACK_TIMEOUT_MS))
DRM_ERROR("%s: timed out waiting for forcewake ack to clear.\n",
intel_uncore_forcewake_domain_to_str(d->id));
}
static inline void
fw_domain_get(const struct intel_uncore_forcewake_domain *d)
{
__raw_i915_write32(d->i915, d->reg_set, d->val_set);
}
static inline void
fw_domain_wait_ack(const struct intel_uncore_forcewake_domain *d)
{
if (wait_for_atomic((__raw_i915_read32(d->i915, d->reg_ack) &
FORCEWAKE_KERNEL),
FORCEWAKE_ACK_TIMEOUT_MS))
DRM_ERROR("%s: timed out waiting for forcewake ack request.\n",
intel_uncore_forcewake_domain_to_str(d->id));
}
static inline void
fw_domain_put(const struct intel_uncore_forcewake_domain *d)
{
__raw_i915_write32(d->i915, d->reg_set, d->val_clear);
}
static inline void
fw_domain_posting_read(const struct intel_uncore_forcewake_domain *d)
{
/* something from same cacheline, but not from the set register */
drm/i915: Type safe register read/write Make I915_READ and I915_WRITE more type safe by wrapping the register offset in a struct. This should eliminate most of the fumbles we've had with misplaced parens. This only takes care of normal mmio registers. We could extend the idea to other register types and define each with its own struct. That way you wouldn't be able to accidentally pass the wrong thing to a specific register access function. The gpio_reg setup is probably the ugliest thing left. But I figure I'd just leave it for now, and wait for some divine inspiration to strike before making it nice. As for the generated code, it's actually a bit better sometimes. Eg. looking at i915_irq_handler(), we can see the following change: lea 0x70024(%rdx,%rax,1),%r9d mov $0x1,%edx - movslq %r9d,%r9 - mov %r9,%rsi - mov %r9,-0x58(%rbp) - callq *0xd8(%rbx) + mov %r9d,%esi + mov %r9d,-0x48(%rbp) callq *0xd8(%rbx) So previously gcc thought the register offset might be signed and decided to sign extend it, just in case. The rest appears to be mostly just minor shuffling of instructions. v2: i915_mmio_reg_{offset,equal,valid}() helpers added s/_REG/_MMIO/ in the register defines mo more switch statements left to worry about ring_emit stuff got sorted in a prep patch cmd parser, lrc context and w/a batch buildup also in prep patch vgpu stuff cleaned up and moved to a prep patch all other unrelated changes split out v3: Rebased due to BXT DSI/BLC, MOCS, etc. v4: Rebased due to churn, s/i915_mmio_reg_t/i915_reg_t/ Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Link: http://patchwork.freedesktop.org/patch/msgid/1447853606-2751-1-git-send-email-ville.syrjala@linux.intel.com
2015-11-18 21:33:26 +08:00
if (i915_mmio_reg_valid(d->reg_post))
__raw_posting_read(d->i915, d->reg_post);
}
static void
fw_domains_get(struct drm_i915_private *dev_priv, enum forcewake_domains fw_domains)
{
struct intel_uncore_forcewake_domain *d;
for_each_fw_domain_masked(d, fw_domains, dev_priv) {
fw_domain_wait_ack_clear(d);
fw_domain_get(d);
}
for_each_fw_domain_masked(d, fw_domains, dev_priv)
fw_domain_wait_ack(d);
}
static void
fw_domains_put(struct drm_i915_private *dev_priv, enum forcewake_domains fw_domains)
{
struct intel_uncore_forcewake_domain *d;
for_each_fw_domain_masked(d, fw_domains, dev_priv) {
fw_domain_put(d);
fw_domain_posting_read(d);
}
}
static void
fw_domains_posting_read(struct drm_i915_private *dev_priv)
{
struct intel_uncore_forcewake_domain *d;
/* No need to do for all, just do for first found */
for_each_fw_domain(d, dev_priv) {
fw_domain_posting_read(d);
break;
}
}
static void
fw_domains_reset(struct drm_i915_private *dev_priv, enum forcewake_domains fw_domains)
{
struct intel_uncore_forcewake_domain *d;
if (dev_priv->uncore.fw_domains == 0)
return;
for_each_fw_domain_masked(d, fw_domains, dev_priv)
fw_domain_reset(d);
fw_domains_posting_read(dev_priv);
}
static void __gen6_gt_wait_for_thread_c0(struct drm_i915_private *dev_priv)
{
/* w/a for a sporadic read returning 0 by waiting for the GT
* thread to wake up.
*/
if (wait_for_atomic_us((__raw_i915_read32(dev_priv, GEN6_GT_THREAD_STATUS_REG) &
GEN6_GT_THREAD_STATUS_CORE_MASK) == 0, 500))
DRM_ERROR("GT thread status wait timed out\n");
}
static void fw_domains_get_with_thread_status(struct drm_i915_private *dev_priv,
enum forcewake_domains fw_domains)
{
fw_domains_get(dev_priv, fw_domains);
/* WaRsForcewakeWaitTC0:snb,ivb,hsw,bdw,vlv */
__gen6_gt_wait_for_thread_c0(dev_priv);
}
static void gen6_gt_check_fifodbg(struct drm_i915_private *dev_priv)
{
u32 gtfifodbg;
gtfifodbg = __raw_i915_read32(dev_priv, GTFIFODBG);
if (WARN(gtfifodbg, "GT wake FIFO error 0x%x\n", gtfifodbg))
__raw_i915_write32(dev_priv, GTFIFODBG, gtfifodbg);
}
static void fw_domains_put_with_fifo(struct drm_i915_private *dev_priv,
enum forcewake_domains fw_domains)
{
fw_domains_put(dev_priv, fw_domains);
gen6_gt_check_fifodbg(dev_priv);
}
static inline u32 fifo_free_entries(struct drm_i915_private *dev_priv)
{
u32 count = __raw_i915_read32(dev_priv, GTFIFOCTL);
return count & GT_FIFO_FREE_ENTRIES_MASK;
}
static int __gen6_gt_wait_for_fifo(struct drm_i915_private *dev_priv)
{
int ret = 0;
/* On VLV, FIFO will be shared by both SW and HW.
* So, we need to read the FREE_ENTRIES everytime */
if (IS_VALLEYVIEW(dev_priv))
dev_priv->uncore.fifo_count = fifo_free_entries(dev_priv);
if (dev_priv->uncore.fifo_count < GT_FIFO_NUM_RESERVED_ENTRIES) {
int loop = 500;
u32 fifo = fifo_free_entries(dev_priv);
while (fifo <= GT_FIFO_NUM_RESERVED_ENTRIES && loop--) {
udelay(10);
fifo = fifo_free_entries(dev_priv);
}
if (WARN_ON(loop < 0 && fifo <= GT_FIFO_NUM_RESERVED_ENTRIES))
++ret;
dev_priv->uncore.fifo_count = fifo;
}
dev_priv->uncore.fifo_count--;
return ret;
}
drm/i915: Use consistent forcewake auto-release timeout across kernel configs Because it is based on jiffies, current implementation releases the forcewake at any time between straight away and between 1ms and 10ms, depending on the kernel configuration (CONFIG_HZ). This is probably not what has been desired, since the dynamics of keeping parts of the GPU awake should not be correlated with this kernel configuration parameter. Change the auto-release mechanism to use hrtimers and set the timeout to 1ms with a 1ms of slack. This should make the GPU power consistent across kernel configs, and timer slack should enable some timer coalescing where multiple force-wake domains exist, or with unrelated timers. For GlBench/T-Rex this decreases the number of forcewake releases from ~480 to ~300 per second, and for a heavy combined OGL/OCL test from ~670 to ~360 (HZ=1000 kernel). Even though this reduction can be attributed to the average release period extending from 0-1ms to 1-2ms, as discussed above, it will make the forcewake timeout consistent for different CONFIG_HZ values. Real life measurements with the above workload has shown that, with this patch, both manage to auto-release the forcewake between 2-4 times per 10ms, even though the number of forcewake gets is dramatically different. T-Rex requests between 5-10 explicit gets and 5-10 implict gets in each 10ms period, while the OGL/OCL test requests 250 and 380 times in the same period. The two data points together suggest that the nature of the forwake accesses is bursty and that further changes and potential timeout extensions, or moving the start of timeout from the first to the last automatic forcewake grab, should be carefully measured for power and performance effects. v2: * Commit spelling. (Dave Gordon) * More discussion on numbers in the commit. (Chris Wilson) Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: Dave Gordon <david.s.gordon@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
2016-04-08 00:04:32 +08:00
static enum hrtimer_restart
intel_uncore_fw_release_timer(struct hrtimer *timer)
{
drm/i915: Use consistent forcewake auto-release timeout across kernel configs Because it is based on jiffies, current implementation releases the forcewake at any time between straight away and between 1ms and 10ms, depending on the kernel configuration (CONFIG_HZ). This is probably not what has been desired, since the dynamics of keeping parts of the GPU awake should not be correlated with this kernel configuration parameter. Change the auto-release mechanism to use hrtimers and set the timeout to 1ms with a 1ms of slack. This should make the GPU power consistent across kernel configs, and timer slack should enable some timer coalescing where multiple force-wake domains exist, or with unrelated timers. For GlBench/T-Rex this decreases the number of forcewake releases from ~480 to ~300 per second, and for a heavy combined OGL/OCL test from ~670 to ~360 (HZ=1000 kernel). Even though this reduction can be attributed to the average release period extending from 0-1ms to 1-2ms, as discussed above, it will make the forcewake timeout consistent for different CONFIG_HZ values. Real life measurements with the above workload has shown that, with this patch, both manage to auto-release the forcewake between 2-4 times per 10ms, even though the number of forcewake gets is dramatically different. T-Rex requests between 5-10 explicit gets and 5-10 implict gets in each 10ms period, while the OGL/OCL test requests 250 and 380 times in the same period. The two data points together suggest that the nature of the forwake accesses is bursty and that further changes and potential timeout extensions, or moving the start of timeout from the first to the last automatic forcewake grab, should be carefully measured for power and performance effects. v2: * Commit spelling. (Dave Gordon) * More discussion on numbers in the commit. (Chris Wilson) Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: Dave Gordon <david.s.gordon@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
2016-04-08 00:04:32 +08:00
struct intel_uncore_forcewake_domain *domain =
container_of(timer, struct intel_uncore_forcewake_domain, timer);
unsigned long irqflags;
assert_rpm_device_not_suspended(domain->i915);
spin_lock_irqsave(&domain->i915->uncore.lock, irqflags);
if (WARN_ON(domain->wake_count == 0))
domain->wake_count++;
if (--domain->wake_count == 0)
domain->i915->uncore.funcs.force_wake_put(domain->i915,
1 << domain->id);
spin_unlock_irqrestore(&domain->i915->uncore.lock, irqflags);
drm/i915: Use consistent forcewake auto-release timeout across kernel configs Because it is based on jiffies, current implementation releases the forcewake at any time between straight away and between 1ms and 10ms, depending on the kernel configuration (CONFIG_HZ). This is probably not what has been desired, since the dynamics of keeping parts of the GPU awake should not be correlated with this kernel configuration parameter. Change the auto-release mechanism to use hrtimers and set the timeout to 1ms with a 1ms of slack. This should make the GPU power consistent across kernel configs, and timer slack should enable some timer coalescing where multiple force-wake domains exist, or with unrelated timers. For GlBench/T-Rex this decreases the number of forcewake releases from ~480 to ~300 per second, and for a heavy combined OGL/OCL test from ~670 to ~360 (HZ=1000 kernel). Even though this reduction can be attributed to the average release period extending from 0-1ms to 1-2ms, as discussed above, it will make the forcewake timeout consistent for different CONFIG_HZ values. Real life measurements with the above workload has shown that, with this patch, both manage to auto-release the forcewake between 2-4 times per 10ms, even though the number of forcewake gets is dramatically different. T-Rex requests between 5-10 explicit gets and 5-10 implict gets in each 10ms period, while the OGL/OCL test requests 250 and 380 times in the same period. The two data points together suggest that the nature of the forwake accesses is bursty and that further changes and potential timeout extensions, or moving the start of timeout from the first to the last automatic forcewake grab, should be carefully measured for power and performance effects. v2: * Commit spelling. (Dave Gordon) * More discussion on numbers in the commit. (Chris Wilson) Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: Dave Gordon <david.s.gordon@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
2016-04-08 00:04:32 +08:00
return HRTIMER_NORESTART;
}
void intel_uncore_forcewake_reset(struct drm_device *dev, bool restore)
{
struct drm_i915_private *dev_priv = dev->dev_private;
unsigned long irqflags;
struct intel_uncore_forcewake_domain *domain;
int retry_count = 100;
enum forcewake_domains fw = 0, active_domains;
/* Hold uncore.lock across reset to prevent any register access
* with forcewake not set correctly. Wait until all pending
* timers are run before holding.
*/
while (1) {
active_domains = 0;
for_each_fw_domain(domain, dev_priv) {
drm/i915: Use consistent forcewake auto-release timeout across kernel configs Because it is based on jiffies, current implementation releases the forcewake at any time between straight away and between 1ms and 10ms, depending on the kernel configuration (CONFIG_HZ). This is probably not what has been desired, since the dynamics of keeping parts of the GPU awake should not be correlated with this kernel configuration parameter. Change the auto-release mechanism to use hrtimers and set the timeout to 1ms with a 1ms of slack. This should make the GPU power consistent across kernel configs, and timer slack should enable some timer coalescing where multiple force-wake domains exist, or with unrelated timers. For GlBench/T-Rex this decreases the number of forcewake releases from ~480 to ~300 per second, and for a heavy combined OGL/OCL test from ~670 to ~360 (HZ=1000 kernel). Even though this reduction can be attributed to the average release period extending from 0-1ms to 1-2ms, as discussed above, it will make the forcewake timeout consistent for different CONFIG_HZ values. Real life measurements with the above workload has shown that, with this patch, both manage to auto-release the forcewake between 2-4 times per 10ms, even though the number of forcewake gets is dramatically different. T-Rex requests between 5-10 explicit gets and 5-10 implict gets in each 10ms period, while the OGL/OCL test requests 250 and 380 times in the same period. The two data points together suggest that the nature of the forwake accesses is bursty and that further changes and potential timeout extensions, or moving the start of timeout from the first to the last automatic forcewake grab, should be carefully measured for power and performance effects. v2: * Commit spelling. (Dave Gordon) * More discussion on numbers in the commit. (Chris Wilson) Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: Dave Gordon <david.s.gordon@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
2016-04-08 00:04:32 +08:00
if (hrtimer_cancel(&domain->timer) == 0)
continue;
drm/i915: Use consistent forcewake auto-release timeout across kernel configs Because it is based on jiffies, current implementation releases the forcewake at any time between straight away and between 1ms and 10ms, depending on the kernel configuration (CONFIG_HZ). This is probably not what has been desired, since the dynamics of keeping parts of the GPU awake should not be correlated with this kernel configuration parameter. Change the auto-release mechanism to use hrtimers and set the timeout to 1ms with a 1ms of slack. This should make the GPU power consistent across kernel configs, and timer slack should enable some timer coalescing where multiple force-wake domains exist, or with unrelated timers. For GlBench/T-Rex this decreases the number of forcewake releases from ~480 to ~300 per second, and for a heavy combined OGL/OCL test from ~670 to ~360 (HZ=1000 kernel). Even though this reduction can be attributed to the average release period extending from 0-1ms to 1-2ms, as discussed above, it will make the forcewake timeout consistent for different CONFIG_HZ values. Real life measurements with the above workload has shown that, with this patch, both manage to auto-release the forcewake between 2-4 times per 10ms, even though the number of forcewake gets is dramatically different. T-Rex requests between 5-10 explicit gets and 5-10 implict gets in each 10ms period, while the OGL/OCL test requests 250 and 380 times in the same period. The two data points together suggest that the nature of the forwake accesses is bursty and that further changes and potential timeout extensions, or moving the start of timeout from the first to the last automatic forcewake grab, should be carefully measured for power and performance effects. v2: * Commit spelling. (Dave Gordon) * More discussion on numbers in the commit. (Chris Wilson) Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: Dave Gordon <david.s.gordon@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
2016-04-08 00:04:32 +08:00
intel_uncore_fw_release_timer(&domain->timer);
}
spin_lock_irqsave(&dev_priv->uncore.lock, irqflags);
for_each_fw_domain(domain, dev_priv) {
drm/i915: Use consistent forcewake auto-release timeout across kernel configs Because it is based on jiffies, current implementation releases the forcewake at any time between straight away and between 1ms and 10ms, depending on the kernel configuration (CONFIG_HZ). This is probably not what has been desired, since the dynamics of keeping parts of the GPU awake should not be correlated with this kernel configuration parameter. Change the auto-release mechanism to use hrtimers and set the timeout to 1ms with a 1ms of slack. This should make the GPU power consistent across kernel configs, and timer slack should enable some timer coalescing where multiple force-wake domains exist, or with unrelated timers. For GlBench/T-Rex this decreases the number of forcewake releases from ~480 to ~300 per second, and for a heavy combined OGL/OCL test from ~670 to ~360 (HZ=1000 kernel). Even though this reduction can be attributed to the average release period extending from 0-1ms to 1-2ms, as discussed above, it will make the forcewake timeout consistent for different CONFIG_HZ values. Real life measurements with the above workload has shown that, with this patch, both manage to auto-release the forcewake between 2-4 times per 10ms, even though the number of forcewake gets is dramatically different. T-Rex requests between 5-10 explicit gets and 5-10 implict gets in each 10ms period, while the OGL/OCL test requests 250 and 380 times in the same period. The two data points together suggest that the nature of the forwake accesses is bursty and that further changes and potential timeout extensions, or moving the start of timeout from the first to the last automatic forcewake grab, should be carefully measured for power and performance effects. v2: * Commit spelling. (Dave Gordon) * More discussion on numbers in the commit. (Chris Wilson) Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: Dave Gordon <david.s.gordon@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
2016-04-08 00:04:32 +08:00
if (hrtimer_active(&domain->timer))
active_domains |= domain->mask;
}
if (active_domains == 0)
break;
if (--retry_count == 0) {
DRM_ERROR("Timed out waiting for forcewake timers to finish\n");
break;
}
spin_unlock_irqrestore(&dev_priv->uncore.lock, irqflags);
cond_resched();
}
WARN_ON(active_domains);
for_each_fw_domain(domain, dev_priv)
if (domain->wake_count)
fw |= domain->mask;
if (fw)
dev_priv->uncore.funcs.force_wake_put(dev_priv, fw);
fw_domains_reset(dev_priv, FORCEWAKE_ALL);
if (restore) { /* If reset with a user forcewake, try to restore */
if (fw)
dev_priv->uncore.funcs.force_wake_get(dev_priv, fw);
if (IS_GEN6(dev) || IS_GEN7(dev))
dev_priv->uncore.fifo_count =
fifo_free_entries(dev_priv);
}
if (!restore)
assert_forcewakes_inactive(dev_priv);
spin_unlock_irqrestore(&dev_priv->uncore.lock, irqflags);
}
static u64 gen9_edram_size(struct drm_i915_private *dev_priv)
{
const unsigned int ways[8] = { 4, 8, 12, 16, 16, 16, 16, 16 };
const unsigned int sets[4] = { 1, 1, 2, 2 };
const u32 cap = dev_priv->edram_cap;
return EDRAM_NUM_BANKS(cap) *
ways[EDRAM_WAYS_IDX(cap)] *
sets[EDRAM_SETS_IDX(cap)] *
1024 * 1024;
}
u64 intel_uncore_edram_size(struct drm_i915_private *dev_priv)
{
if (!HAS_EDRAM(dev_priv))
return 0;
/* The needed capability bits for size calculation
* are not there with pre gen9 so return 128MB always.
*/
if (INTEL_GEN(dev_priv) < 9)
return 128 * 1024 * 1024;
return gen9_edram_size(dev_priv);
}
static void intel_uncore_edram_detect(struct drm_i915_private *dev_priv)
{
if (IS_HASWELL(dev_priv) ||
IS_BROADWELL(dev_priv) ||
INTEL_GEN(dev_priv) >= 9) {
dev_priv->edram_cap = __raw_i915_read32(dev_priv,
HSW_EDRAM_CAP);
/* NB: We can't write IDICR yet because we do not have gt funcs
* set up */
} else {
dev_priv->edram_cap = 0;
}
if (HAS_EDRAM(dev_priv))
DRM_INFO("Found %lluMB of eDRAM\n",
intel_uncore_edram_size(dev_priv) / (1024 * 1024));
}
static bool
fpga_check_for_unclaimed_mmio(struct drm_i915_private *dev_priv)
{
u32 dbg;
dbg = __raw_i915_read32(dev_priv, FPGA_DBG);
if (likely(!(dbg & FPGA_DBG_RM_NOCLAIM)))
return false;
__raw_i915_write32(dev_priv, FPGA_DBG, FPGA_DBG_RM_NOCLAIM);
return true;
}
static bool
vlv_check_for_unclaimed_mmio(struct drm_i915_private *dev_priv)
{
u32 cer;
cer = __raw_i915_read32(dev_priv, CLAIM_ER);
if (likely(!(cer & (CLAIM_ER_OVERFLOW | CLAIM_ER_CTR_MASK))))
return false;
__raw_i915_write32(dev_priv, CLAIM_ER, CLAIM_ER_CLR);
return true;
}
static bool
check_for_unclaimed_mmio(struct drm_i915_private *dev_priv)
{
if (HAS_FPGA_DBG_UNCLAIMED(dev_priv))
return fpga_check_for_unclaimed_mmio(dev_priv);
if (IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv))
return vlv_check_for_unclaimed_mmio(dev_priv);
return false;
}
static void __intel_uncore_early_sanitize(struct drm_device *dev,
bool restore_forcewake)
{
struct drm_i915_private *dev_priv = dev->dev_private;
/* clear out unclaimed reg detection bit */
if (check_for_unclaimed_mmio(dev_priv))
DRM_DEBUG("unclaimed mmio detected on uncore init, clearing\n");
/* clear out old GT FIFO errors */
if (IS_GEN6(dev) || IS_GEN7(dev))
__raw_i915_write32(dev_priv, GTFIFODBG,
__raw_i915_read32(dev_priv, GTFIFODBG));
/* WaDisableShadowRegForCpd:chv */
if (IS_CHERRYVIEW(dev)) {
__raw_i915_write32(dev_priv, GTFIFOCTL,
__raw_i915_read32(dev_priv, GTFIFOCTL) |
GT_FIFO_CTL_BLOCK_ALL_POLICY_STALL |
GT_FIFO_CTL_RC6_POLICY_STALL);
}
intel_uncore_forcewake_reset(dev, restore_forcewake);
}
void intel_uncore_early_sanitize(struct drm_device *dev, bool restore_forcewake)
{
__intel_uncore_early_sanitize(dev, restore_forcewake);
i915_check_and_clear_faults(dev);
}
void intel_uncore_sanitize(struct drm_device *dev)
{
drm/i915/bxt: Check BIOS RC6 setup before enabling RC6 RC6 setup is shared between BIOS and Driver. BIOS sets up subset of RC6 setup registers. If those are not setup Driver should not enable RC6. For implementing this, driver can check RC_CTRL0 and RC_CTRL1 values to know if BIOS has enabled HW/SW RC6. This will also enable user to control RC6 using BIOS settings alone. RC6 related instability can be avoided by disabling via BIOS settings till driver fixes it. v2: Had placed logic in gen8 function by mistake. Fixed it. Ensuring RPM is not enabled in case BIOS disabled RC6. v3: Need to disable RPM if RC6 is disabled due to BIOS settings. (Daniel) Runtime PM enabling happens before gen9_enable_rc6. Moved the updation of enable_rc6 parameter in intel_uncore_sanitize. v4: Added elaborate check for BIOS RC6 setup. Prepared check_pctx for bxt. (Imre) v5: Caching reserved stolen base and size in the driver private data. Reorganized RC6 setup check. Moved from gen9_enable_rc6 to intel_uncore_sanitize. (Imre) v6: Rebasing on the patch submitted by Imre that moves gem_init_stolen earlier in the load. v7: Removed PWRCTX_MAXCNT_VCSUNIT1 check as it applies to SKL. (Imre) v8: Fixed formatting and checkpatch issues. Fixed functional issue where RC6 ctx size check was missing. (Imre) Cc: Imre Deak <imre.deak@intel.com> Signed-off-by: Sagar Arun Kamble <sagar.a.kamble@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1454697809-22113-1-git-send-email-sagar.a.kamble@intel.com
2016-02-06 02:43:29 +08:00
i915.enable_rc6 = sanitize_rc6_option(dev, i915.enable_rc6);
/* BIOS often leaves RC6 enabled, but disable it for hw init */
intel_disable_gt_powersave(dev);
}
static void __intel_uncore_forcewake_get(struct drm_i915_private *dev_priv,
enum forcewake_domains fw_domains)
{
struct intel_uncore_forcewake_domain *domain;
if (!dev_priv->uncore.funcs.force_wake_get)
return;
fw_domains &= dev_priv->uncore.fw_domains;
for_each_fw_domain_masked(domain, fw_domains, dev_priv) {
if (domain->wake_count++)
fw_domains &= ~domain->mask;
}
if (fw_domains)
dev_priv->uncore.funcs.force_wake_get(dev_priv, fw_domains);
}
/**
* intel_uncore_forcewake_get - grab forcewake domain references
* @dev_priv: i915 device instance
* @fw_domains: forcewake domains to get reference on
*
* This function can be used get GT's forcewake domain references.
* Normal register access will handle the forcewake domains automatically.
* However if some sequence requires the GT to not power down a particular
* forcewake domains this function should be called at the beginning of the
* sequence. And subsequently the reference should be dropped by symmetric
* call to intel_unforce_forcewake_put(). Usually caller wants all the domains
* to be kept awake so the @fw_domains would be then FORCEWAKE_ALL.
*/
void intel_uncore_forcewake_get(struct drm_i915_private *dev_priv,
enum forcewake_domains fw_domains)
{
unsigned long irqflags;
if (!dev_priv->uncore.funcs.force_wake_get)
return;
assert_rpm_wakelock_held(dev_priv);
spin_lock_irqsave(&dev_priv->uncore.lock, irqflags);
__intel_uncore_forcewake_get(dev_priv, fw_domains);
spin_unlock_irqrestore(&dev_priv->uncore.lock, irqflags);
}
/**
* intel_uncore_forcewake_get__locked - grab forcewake domain references
* @dev_priv: i915 device instance
* @fw_domains: forcewake domains to get reference on
*
* See intel_uncore_forcewake_get(). This variant places the onus
* on the caller to explicitly handle the dev_priv->uncore.lock spinlock.
*/
void intel_uncore_forcewake_get__locked(struct drm_i915_private *dev_priv,
enum forcewake_domains fw_domains)
{
assert_spin_locked(&dev_priv->uncore.lock);
if (!dev_priv->uncore.funcs.force_wake_get)
return;
__intel_uncore_forcewake_get(dev_priv, fw_domains);
}
static void __intel_uncore_forcewake_put(struct drm_i915_private *dev_priv,
enum forcewake_domains fw_domains)
{
struct intel_uncore_forcewake_domain *domain;
if (!dev_priv->uncore.funcs.force_wake_put)
return;
fw_domains &= dev_priv->uncore.fw_domains;
for_each_fw_domain_masked(domain, fw_domains, dev_priv) {
if (WARN_ON(domain->wake_count == 0))
continue;
if (--domain->wake_count)
continue;
fw_domain_arm_timer(domain);
}
}
/**
* intel_uncore_forcewake_put - release a forcewake domain reference
* @dev_priv: i915 device instance
* @fw_domains: forcewake domains to put references
*
* This function drops the device-level forcewakes for specified
* domains obtained by intel_uncore_forcewake_get().
*/
void intel_uncore_forcewake_put(struct drm_i915_private *dev_priv,
enum forcewake_domains fw_domains)
{
unsigned long irqflags;
if (!dev_priv->uncore.funcs.force_wake_put)
return;
spin_lock_irqsave(&dev_priv->uncore.lock, irqflags);
__intel_uncore_forcewake_put(dev_priv, fw_domains);
spin_unlock_irqrestore(&dev_priv->uncore.lock, irqflags);
}
/**
* intel_uncore_forcewake_put__locked - grab forcewake domain references
* @dev_priv: i915 device instance
* @fw_domains: forcewake domains to get reference on
*
* See intel_uncore_forcewake_put(). This variant places the onus
* on the caller to explicitly handle the dev_priv->uncore.lock spinlock.
*/
void intel_uncore_forcewake_put__locked(struct drm_i915_private *dev_priv,
enum forcewake_domains fw_domains)
{
assert_spin_locked(&dev_priv->uncore.lock);
if (!dev_priv->uncore.funcs.force_wake_put)
return;
__intel_uncore_forcewake_put(dev_priv, fw_domains);
}
void assert_forcewakes_inactive(struct drm_i915_private *dev_priv)
{
struct intel_uncore_forcewake_domain *domain;
if (!dev_priv->uncore.funcs.force_wake_get)
return;
for_each_fw_domain(domain, dev_priv)
WARN_ON(domain->wake_count);
}
/* We give fast paths for the really cool registers */
#define NEEDS_FORCE_WAKE(reg) ((reg) < 0x40000)
#define __gen6_reg_read_fw_domains(offset) \
({ \
enum forcewake_domains __fwd; \
if (NEEDS_FORCE_WAKE(offset)) \
__fwd = FORCEWAKE_RENDER; \
else \
__fwd = 0; \
__fwd; \
})
#define REG_RANGE(reg, start, end) ((reg) >= (start) && (reg) < (end))
#define FORCEWAKE_VLV_RENDER_RANGE_OFFSET(reg) \
(REG_RANGE((reg), 0x2000, 0x4000) || \
REG_RANGE((reg), 0x5000, 0x8000) || \
REG_RANGE((reg), 0xB000, 0x12000) || \
REG_RANGE((reg), 0x2E000, 0x30000))
#define FORCEWAKE_VLV_MEDIA_RANGE_OFFSET(reg) \
(REG_RANGE((reg), 0x12000, 0x14000) || \
REG_RANGE((reg), 0x22000, 0x24000) || \
REG_RANGE((reg), 0x30000, 0x40000))
#define __vlv_reg_read_fw_domains(offset) \
({ \
enum forcewake_domains __fwd = 0; \
if (!NEEDS_FORCE_WAKE(offset)) \
__fwd = 0; \
else if (FORCEWAKE_VLV_RENDER_RANGE_OFFSET(offset)) \
__fwd = FORCEWAKE_RENDER; \
else if (FORCEWAKE_VLV_MEDIA_RANGE_OFFSET(offset)) \
__fwd = FORCEWAKE_MEDIA; \
__fwd; \
})
static const i915_reg_t gen8_shadowed_regs[] = {
GEN6_RPNSWREQ,
GEN6_RC_VIDEO_FREQ,
RING_TAIL(RENDER_RING_BASE),
RING_TAIL(GEN6_BSD_RING_BASE),
RING_TAIL(VEBOX_RING_BASE),
RING_TAIL(BLT_RING_BASE),
/* TODO: Other registers are not yet used */
};
static bool is_gen8_shadowed(u32 offset)
{
int i;
for (i = 0; i < ARRAY_SIZE(gen8_shadowed_regs); i++)
if (offset == gen8_shadowed_regs[i].reg)
return true;
return false;
}
#define __gen8_reg_write_fw_domains(offset) \
({ \
enum forcewake_domains __fwd; \
if (NEEDS_FORCE_WAKE(offset) && !is_gen8_shadowed(offset)) \
__fwd = FORCEWAKE_RENDER; \
else \
__fwd = 0; \
__fwd; \
})
#define FORCEWAKE_CHV_RENDER_RANGE_OFFSET(reg) \
(REG_RANGE((reg), 0x2000, 0x4000) || \
REG_RANGE((reg), 0x5200, 0x8000) || \
REG_RANGE((reg), 0x8300, 0x8500) || \
REG_RANGE((reg), 0xB000, 0xB480) || \
REG_RANGE((reg), 0xE000, 0xE800))
#define FORCEWAKE_CHV_MEDIA_RANGE_OFFSET(reg) \
(REG_RANGE((reg), 0x8800, 0x8900) || \
REG_RANGE((reg), 0xD000, 0xD800) || \
REG_RANGE((reg), 0x12000, 0x14000) || \
REG_RANGE((reg), 0x1A000, 0x1C000) || \
REG_RANGE((reg), 0x1E800, 0x1EA00) || \
REG_RANGE((reg), 0x30000, 0x38000))
#define FORCEWAKE_CHV_COMMON_RANGE_OFFSET(reg) \
(REG_RANGE((reg), 0x4000, 0x5000) || \
REG_RANGE((reg), 0x8000, 0x8300) || \
REG_RANGE((reg), 0x8500, 0x8600) || \
REG_RANGE((reg), 0x9000, 0xB000) || \
REG_RANGE((reg), 0xF000, 0x10000))
#define __chv_reg_read_fw_domains(offset) \
({ \
enum forcewake_domains __fwd = 0; \
if (!NEEDS_FORCE_WAKE(offset)) \
__fwd = 0; \
else if (FORCEWAKE_CHV_RENDER_RANGE_OFFSET(offset)) \
__fwd = FORCEWAKE_RENDER; \
else if (FORCEWAKE_CHV_MEDIA_RANGE_OFFSET(offset)) \
__fwd = FORCEWAKE_MEDIA; \
else if (FORCEWAKE_CHV_COMMON_RANGE_OFFSET(offset)) \
__fwd = FORCEWAKE_RENDER | FORCEWAKE_MEDIA; \
__fwd; \
})
#define __chv_reg_write_fw_domains(offset) \
({ \
enum forcewake_domains __fwd = 0; \
if (!NEEDS_FORCE_WAKE(offset) || is_gen8_shadowed(offset)) \
__fwd = 0; \
else if (FORCEWAKE_CHV_RENDER_RANGE_OFFSET(offset)) \
__fwd = FORCEWAKE_RENDER; \
else if (FORCEWAKE_CHV_MEDIA_RANGE_OFFSET(offset)) \
__fwd = FORCEWAKE_MEDIA; \
else if (FORCEWAKE_CHV_COMMON_RANGE_OFFSET(offset)) \
__fwd = FORCEWAKE_RENDER | FORCEWAKE_MEDIA; \
__fwd; \
})
#define FORCEWAKE_GEN9_UNCORE_RANGE_OFFSET(reg) \
REG_RANGE((reg), 0xB00, 0x2000)
#define FORCEWAKE_GEN9_RENDER_RANGE_OFFSET(reg) \
(REG_RANGE((reg), 0x2000, 0x2700) || \
REG_RANGE((reg), 0x3000, 0x4000) || \
REG_RANGE((reg), 0x5200, 0x8000) || \
REG_RANGE((reg), 0x8140, 0x8160) || \
REG_RANGE((reg), 0x8300, 0x8500) || \
REG_RANGE((reg), 0x8C00, 0x8D00) || \
REG_RANGE((reg), 0xB000, 0xB480) || \
REG_RANGE((reg), 0xE000, 0xE900) || \
REG_RANGE((reg), 0x24400, 0x24800))
#define FORCEWAKE_GEN9_MEDIA_RANGE_OFFSET(reg) \
(REG_RANGE((reg), 0x8130, 0x8140) || \
REG_RANGE((reg), 0x8800, 0x8A00) || \
REG_RANGE((reg), 0xD000, 0xD800) || \
REG_RANGE((reg), 0x12000, 0x14000) || \
REG_RANGE((reg), 0x1A000, 0x1EA00) || \
REG_RANGE((reg), 0x30000, 0x40000))
#define FORCEWAKE_GEN9_COMMON_RANGE_OFFSET(reg) \
REG_RANGE((reg), 0x9400, 0x9800)
#define FORCEWAKE_GEN9_BLITTER_RANGE_OFFSET(reg) \
((reg) < 0x40000 && \
!FORCEWAKE_GEN9_UNCORE_RANGE_OFFSET(reg) && \
!FORCEWAKE_GEN9_RENDER_RANGE_OFFSET(reg) && \
!FORCEWAKE_GEN9_MEDIA_RANGE_OFFSET(reg) && \
!FORCEWAKE_GEN9_COMMON_RANGE_OFFSET(reg))
#define SKL_NEEDS_FORCE_WAKE(reg) \
((reg) < 0x40000 && !FORCEWAKE_GEN9_UNCORE_RANGE_OFFSET(reg))
#define __gen9_reg_read_fw_domains(offset) \
({ \
enum forcewake_domains __fwd; \
if (!SKL_NEEDS_FORCE_WAKE(offset)) \
__fwd = 0; \
else if (FORCEWAKE_GEN9_RENDER_RANGE_OFFSET(offset)) \
__fwd = FORCEWAKE_RENDER; \
else if (FORCEWAKE_GEN9_MEDIA_RANGE_OFFSET(offset)) \
__fwd = FORCEWAKE_MEDIA; \
else if (FORCEWAKE_GEN9_COMMON_RANGE_OFFSET(offset)) \
__fwd = FORCEWAKE_RENDER | FORCEWAKE_MEDIA; \
else \
__fwd = FORCEWAKE_BLITTER; \
__fwd; \
})
static const i915_reg_t gen9_shadowed_regs[] = {
RING_TAIL(RENDER_RING_BASE),
RING_TAIL(GEN6_BSD_RING_BASE),
RING_TAIL(VEBOX_RING_BASE),
RING_TAIL(BLT_RING_BASE),
GEN6_RPNSWREQ,
GEN6_RC_VIDEO_FREQ,
/* TODO: Other registers are not yet used */
};
static bool is_gen9_shadowed(u32 offset)
{
int i;
for (i = 0; i < ARRAY_SIZE(gen9_shadowed_regs); i++)
if (offset == gen9_shadowed_regs[i].reg)
return true;
return false;
}
#define __gen9_reg_write_fw_domains(offset) \
({ \
enum forcewake_domains __fwd; \
if (!SKL_NEEDS_FORCE_WAKE(offset) || is_gen9_shadowed(offset)) \
__fwd = 0; \
else if (FORCEWAKE_GEN9_RENDER_RANGE_OFFSET(offset)) \
__fwd = FORCEWAKE_RENDER; \
else if (FORCEWAKE_GEN9_MEDIA_RANGE_OFFSET(offset)) \
__fwd = FORCEWAKE_MEDIA; \
else if (FORCEWAKE_GEN9_COMMON_RANGE_OFFSET(offset)) \
__fwd = FORCEWAKE_RENDER | FORCEWAKE_MEDIA; \
else \
__fwd = FORCEWAKE_BLITTER; \
__fwd; \
})
static void
ilk_dummy_write(struct drm_i915_private *dev_priv)
{
/* WaIssueDummyWriteToWakeupFromRC6:ilk Issue a dummy write to wake up
* the chip from rc6 before touching it for real. MI_MODE is masked,
* hence harmless to write 0 into. */
__raw_i915_write32(dev_priv, MI_MODE, 0);
}
static void
__unclaimed_reg_debug(struct drm_i915_private *dev_priv,
const i915_reg_t reg,
const bool read,
const bool before)
{
if (WARN(check_for_unclaimed_mmio(dev_priv),
"Unclaimed register detected %s %s register 0x%x\n",
before ? "before" : "after",
read ? "reading" : "writing to",
i915_mmio_reg_offset(reg)))
i915.mmio_debug--; /* Only report the first N failures */
}
static inline void
unclaimed_reg_debug(struct drm_i915_private *dev_priv,
const i915_reg_t reg,
const bool read,
const bool before)
{
if (likely(!i915.mmio_debug))
return;
__unclaimed_reg_debug(dev_priv, reg, read, before);
}
#define GEN2_READ_HEADER(x) \
u##x val = 0; \
assert_rpm_wakelock_held(dev_priv);
#define GEN2_READ_FOOTER \
trace_i915_reg_rw(false, reg, val, sizeof(val), trace); \
return val
#define __gen2_read(x) \
static u##x \
drm/i915: Type safe register read/write Make I915_READ and I915_WRITE more type safe by wrapping the register offset in a struct. This should eliminate most of the fumbles we've had with misplaced parens. This only takes care of normal mmio registers. We could extend the idea to other register types and define each with its own struct. That way you wouldn't be able to accidentally pass the wrong thing to a specific register access function. The gpio_reg setup is probably the ugliest thing left. But I figure I'd just leave it for now, and wait for some divine inspiration to strike before making it nice. As for the generated code, it's actually a bit better sometimes. Eg. looking at i915_irq_handler(), we can see the following change: lea 0x70024(%rdx,%rax,1),%r9d mov $0x1,%edx - movslq %r9d,%r9 - mov %r9,%rsi - mov %r9,-0x58(%rbp) - callq *0xd8(%rbx) + mov %r9d,%esi + mov %r9d,-0x48(%rbp) callq *0xd8(%rbx) So previously gcc thought the register offset might be signed and decided to sign extend it, just in case. The rest appears to be mostly just minor shuffling of instructions. v2: i915_mmio_reg_{offset,equal,valid}() helpers added s/_REG/_MMIO/ in the register defines mo more switch statements left to worry about ring_emit stuff got sorted in a prep patch cmd parser, lrc context and w/a batch buildup also in prep patch vgpu stuff cleaned up and moved to a prep patch all other unrelated changes split out v3: Rebased due to BXT DSI/BLC, MOCS, etc. v4: Rebased due to churn, s/i915_mmio_reg_t/i915_reg_t/ Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Link: http://patchwork.freedesktop.org/patch/msgid/1447853606-2751-1-git-send-email-ville.syrjala@linux.intel.com
2015-11-18 21:33:26 +08:00
gen2_read##x(struct drm_i915_private *dev_priv, i915_reg_t reg, bool trace) { \
GEN2_READ_HEADER(x); \
val = __raw_i915_read##x(dev_priv, reg); \
GEN2_READ_FOOTER; \
}
#define __gen5_read(x) \
static u##x \
drm/i915: Type safe register read/write Make I915_READ and I915_WRITE more type safe by wrapping the register offset in a struct. This should eliminate most of the fumbles we've had with misplaced parens. This only takes care of normal mmio registers. We could extend the idea to other register types and define each with its own struct. That way you wouldn't be able to accidentally pass the wrong thing to a specific register access function. The gpio_reg setup is probably the ugliest thing left. But I figure I'd just leave it for now, and wait for some divine inspiration to strike before making it nice. As for the generated code, it's actually a bit better sometimes. Eg. looking at i915_irq_handler(), we can see the following change: lea 0x70024(%rdx,%rax,1),%r9d mov $0x1,%edx - movslq %r9d,%r9 - mov %r9,%rsi - mov %r9,-0x58(%rbp) - callq *0xd8(%rbx) + mov %r9d,%esi + mov %r9d,-0x48(%rbp) callq *0xd8(%rbx) So previously gcc thought the register offset might be signed and decided to sign extend it, just in case. The rest appears to be mostly just minor shuffling of instructions. v2: i915_mmio_reg_{offset,equal,valid}() helpers added s/_REG/_MMIO/ in the register defines mo more switch statements left to worry about ring_emit stuff got sorted in a prep patch cmd parser, lrc context and w/a batch buildup also in prep patch vgpu stuff cleaned up and moved to a prep patch all other unrelated changes split out v3: Rebased due to BXT DSI/BLC, MOCS, etc. v4: Rebased due to churn, s/i915_mmio_reg_t/i915_reg_t/ Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Link: http://patchwork.freedesktop.org/patch/msgid/1447853606-2751-1-git-send-email-ville.syrjala@linux.intel.com
2015-11-18 21:33:26 +08:00
gen5_read##x(struct drm_i915_private *dev_priv, i915_reg_t reg, bool trace) { \
GEN2_READ_HEADER(x); \
ilk_dummy_write(dev_priv); \
val = __raw_i915_read##x(dev_priv, reg); \
GEN2_READ_FOOTER; \
}
__gen5_read(8)
__gen5_read(16)
__gen5_read(32)
__gen5_read(64)
__gen2_read(8)
__gen2_read(16)
__gen2_read(32)
__gen2_read(64)
#undef __gen5_read
#undef __gen2_read
#undef GEN2_READ_FOOTER
#undef GEN2_READ_HEADER
#define GEN6_READ_HEADER(x) \
drm/i915: Type safe register read/write Make I915_READ and I915_WRITE more type safe by wrapping the register offset in a struct. This should eliminate most of the fumbles we've had with misplaced parens. This only takes care of normal mmio registers. We could extend the idea to other register types and define each with its own struct. That way you wouldn't be able to accidentally pass the wrong thing to a specific register access function. The gpio_reg setup is probably the ugliest thing left. But I figure I'd just leave it for now, and wait for some divine inspiration to strike before making it nice. As for the generated code, it's actually a bit better sometimes. Eg. looking at i915_irq_handler(), we can see the following change: lea 0x70024(%rdx,%rax,1),%r9d mov $0x1,%edx - movslq %r9d,%r9 - mov %r9,%rsi - mov %r9,-0x58(%rbp) - callq *0xd8(%rbx) + mov %r9d,%esi + mov %r9d,-0x48(%rbp) callq *0xd8(%rbx) So previously gcc thought the register offset might be signed and decided to sign extend it, just in case. The rest appears to be mostly just minor shuffling of instructions. v2: i915_mmio_reg_{offset,equal,valid}() helpers added s/_REG/_MMIO/ in the register defines mo more switch statements left to worry about ring_emit stuff got sorted in a prep patch cmd parser, lrc context and w/a batch buildup also in prep patch vgpu stuff cleaned up and moved to a prep patch all other unrelated changes split out v3: Rebased due to BXT DSI/BLC, MOCS, etc. v4: Rebased due to churn, s/i915_mmio_reg_t/i915_reg_t/ Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Link: http://patchwork.freedesktop.org/patch/msgid/1447853606-2751-1-git-send-email-ville.syrjala@linux.intel.com
2015-11-18 21:33:26 +08:00
u32 offset = i915_mmio_reg_offset(reg); \
unsigned long irqflags; \
u##x val = 0; \
assert_rpm_wakelock_held(dev_priv); \
spin_lock_irqsave(&dev_priv->uncore.lock, irqflags); \
unclaimed_reg_debug(dev_priv, reg, true, true)
#define GEN6_READ_FOOTER \
unclaimed_reg_debug(dev_priv, reg, true, false); \
spin_unlock_irqrestore(&dev_priv->uncore.lock, irqflags); \
trace_i915_reg_rw(false, reg, val, sizeof(val), trace); \
return val
static inline void __force_wake_auto(struct drm_i915_private *dev_priv,
enum forcewake_domains fw_domains)
{
struct intel_uncore_forcewake_domain *domain;
if (WARN_ON(!fw_domains))
return;
/* Ideally GCC would be constant-fold and eliminate this loop */
for_each_fw_domain_masked(domain, fw_domains, dev_priv) {
if (domain->wake_count) {
fw_domains &= ~domain->mask;
continue;
}
fw_domain_arm_timer(domain);
}
if (fw_domains)
dev_priv->uncore.funcs.force_wake_get(dev_priv, fw_domains);
}
#define __gen6_read(x) \
static u##x \
drm/i915: Type safe register read/write Make I915_READ and I915_WRITE more type safe by wrapping the register offset in a struct. This should eliminate most of the fumbles we've had with misplaced parens. This only takes care of normal mmio registers. We could extend the idea to other register types and define each with its own struct. That way you wouldn't be able to accidentally pass the wrong thing to a specific register access function. The gpio_reg setup is probably the ugliest thing left. But I figure I'd just leave it for now, and wait for some divine inspiration to strike before making it nice. As for the generated code, it's actually a bit better sometimes. Eg. looking at i915_irq_handler(), we can see the following change: lea 0x70024(%rdx,%rax,1),%r9d mov $0x1,%edx - movslq %r9d,%r9 - mov %r9,%rsi - mov %r9,-0x58(%rbp) - callq *0xd8(%rbx) + mov %r9d,%esi + mov %r9d,-0x48(%rbp) callq *0xd8(%rbx) So previously gcc thought the register offset might be signed and decided to sign extend it, just in case. The rest appears to be mostly just minor shuffling of instructions. v2: i915_mmio_reg_{offset,equal,valid}() helpers added s/_REG/_MMIO/ in the register defines mo more switch statements left to worry about ring_emit stuff got sorted in a prep patch cmd parser, lrc context and w/a batch buildup also in prep patch vgpu stuff cleaned up and moved to a prep patch all other unrelated changes split out v3: Rebased due to BXT DSI/BLC, MOCS, etc. v4: Rebased due to churn, s/i915_mmio_reg_t/i915_reg_t/ Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Link: http://patchwork.freedesktop.org/patch/msgid/1447853606-2751-1-git-send-email-ville.syrjala@linux.intel.com
2015-11-18 21:33:26 +08:00
gen6_read##x(struct drm_i915_private *dev_priv, i915_reg_t reg, bool trace) { \
enum forcewake_domains fw_engine; \
GEN6_READ_HEADER(x); \
fw_engine = __gen6_reg_read_fw_domains(offset); \
if (fw_engine) \
__force_wake_auto(dev_priv, fw_engine); \
val = __raw_i915_read##x(dev_priv, reg); \
GEN6_READ_FOOTER; \
}
#define __vlv_read(x) \
static u##x \
drm/i915: Type safe register read/write Make I915_READ and I915_WRITE more type safe by wrapping the register offset in a struct. This should eliminate most of the fumbles we've had with misplaced parens. This only takes care of normal mmio registers. We could extend the idea to other register types and define each with its own struct. That way you wouldn't be able to accidentally pass the wrong thing to a specific register access function. The gpio_reg setup is probably the ugliest thing left. But I figure I'd just leave it for now, and wait for some divine inspiration to strike before making it nice. As for the generated code, it's actually a bit better sometimes. Eg. looking at i915_irq_handler(), we can see the following change: lea 0x70024(%rdx,%rax,1),%r9d mov $0x1,%edx - movslq %r9d,%r9 - mov %r9,%rsi - mov %r9,-0x58(%rbp) - callq *0xd8(%rbx) + mov %r9d,%esi + mov %r9d,-0x48(%rbp) callq *0xd8(%rbx) So previously gcc thought the register offset might be signed and decided to sign extend it, just in case. The rest appears to be mostly just minor shuffling of instructions. v2: i915_mmio_reg_{offset,equal,valid}() helpers added s/_REG/_MMIO/ in the register defines mo more switch statements left to worry about ring_emit stuff got sorted in a prep patch cmd parser, lrc context and w/a batch buildup also in prep patch vgpu stuff cleaned up and moved to a prep patch all other unrelated changes split out v3: Rebased due to BXT DSI/BLC, MOCS, etc. v4: Rebased due to churn, s/i915_mmio_reg_t/i915_reg_t/ Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Link: http://patchwork.freedesktop.org/patch/msgid/1447853606-2751-1-git-send-email-ville.syrjala@linux.intel.com
2015-11-18 21:33:26 +08:00
vlv_read##x(struct drm_i915_private *dev_priv, i915_reg_t reg, bool trace) { \
enum forcewake_domains fw_engine; \
GEN6_READ_HEADER(x); \
fw_engine = __vlv_reg_read_fw_domains(offset); \
if (fw_engine) \
__force_wake_auto(dev_priv, fw_engine); \
val = __raw_i915_read##x(dev_priv, reg); \
GEN6_READ_FOOTER; \
}
#define __chv_read(x) \
static u##x \
drm/i915: Type safe register read/write Make I915_READ and I915_WRITE more type safe by wrapping the register offset in a struct. This should eliminate most of the fumbles we've had with misplaced parens. This only takes care of normal mmio registers. We could extend the idea to other register types and define each with its own struct. That way you wouldn't be able to accidentally pass the wrong thing to a specific register access function. The gpio_reg setup is probably the ugliest thing left. But I figure I'd just leave it for now, and wait for some divine inspiration to strike before making it nice. As for the generated code, it's actually a bit better sometimes. Eg. looking at i915_irq_handler(), we can see the following change: lea 0x70024(%rdx,%rax,1),%r9d mov $0x1,%edx - movslq %r9d,%r9 - mov %r9,%rsi - mov %r9,-0x58(%rbp) - callq *0xd8(%rbx) + mov %r9d,%esi + mov %r9d,-0x48(%rbp) callq *0xd8(%rbx) So previously gcc thought the register offset might be signed and decided to sign extend it, just in case. The rest appears to be mostly just minor shuffling of instructions. v2: i915_mmio_reg_{offset,equal,valid}() helpers added s/_REG/_MMIO/ in the register defines mo more switch statements left to worry about ring_emit stuff got sorted in a prep patch cmd parser, lrc context and w/a batch buildup also in prep patch vgpu stuff cleaned up and moved to a prep patch all other unrelated changes split out v3: Rebased due to BXT DSI/BLC, MOCS, etc. v4: Rebased due to churn, s/i915_mmio_reg_t/i915_reg_t/ Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Link: http://patchwork.freedesktop.org/patch/msgid/1447853606-2751-1-git-send-email-ville.syrjala@linux.intel.com
2015-11-18 21:33:26 +08:00
chv_read##x(struct drm_i915_private *dev_priv, i915_reg_t reg, bool trace) { \
enum forcewake_domains fw_engine; \
GEN6_READ_HEADER(x); \
fw_engine = __chv_reg_read_fw_domains(offset); \
if (fw_engine) \
__force_wake_auto(dev_priv, fw_engine); \
val = __raw_i915_read##x(dev_priv, reg); \
GEN6_READ_FOOTER; \
}
#define __gen9_read(x) \
static u##x \
drm/i915: Type safe register read/write Make I915_READ and I915_WRITE more type safe by wrapping the register offset in a struct. This should eliminate most of the fumbles we've had with misplaced parens. This only takes care of normal mmio registers. We could extend the idea to other register types and define each with its own struct. That way you wouldn't be able to accidentally pass the wrong thing to a specific register access function. The gpio_reg setup is probably the ugliest thing left. But I figure I'd just leave it for now, and wait for some divine inspiration to strike before making it nice. As for the generated code, it's actually a bit better sometimes. Eg. looking at i915_irq_handler(), we can see the following change: lea 0x70024(%rdx,%rax,1),%r9d mov $0x1,%edx - movslq %r9d,%r9 - mov %r9,%rsi - mov %r9,-0x58(%rbp) - callq *0xd8(%rbx) + mov %r9d,%esi + mov %r9d,-0x48(%rbp) callq *0xd8(%rbx) So previously gcc thought the register offset might be signed and decided to sign extend it, just in case. The rest appears to be mostly just minor shuffling of instructions. v2: i915_mmio_reg_{offset,equal,valid}() helpers added s/_REG/_MMIO/ in the register defines mo more switch statements left to worry about ring_emit stuff got sorted in a prep patch cmd parser, lrc context and w/a batch buildup also in prep patch vgpu stuff cleaned up and moved to a prep patch all other unrelated changes split out v3: Rebased due to BXT DSI/BLC, MOCS, etc. v4: Rebased due to churn, s/i915_mmio_reg_t/i915_reg_t/ Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Link: http://patchwork.freedesktop.org/patch/msgid/1447853606-2751-1-git-send-email-ville.syrjala@linux.intel.com
2015-11-18 21:33:26 +08:00
gen9_read##x(struct drm_i915_private *dev_priv, i915_reg_t reg, bool trace) { \
enum forcewake_domains fw_engine; \
GEN6_READ_HEADER(x); \
fw_engine = __gen9_reg_read_fw_domains(offset); \
if (fw_engine) \
__force_wake_auto(dev_priv, fw_engine); \
val = __raw_i915_read##x(dev_priv, reg); \
GEN6_READ_FOOTER; \
}
__gen9_read(8)
__gen9_read(16)
__gen9_read(32)
__gen9_read(64)
__chv_read(8)
__chv_read(16)
__chv_read(32)
__chv_read(64)
__vlv_read(8)
__vlv_read(16)
__vlv_read(32)
__vlv_read(64)
__gen6_read(8)
__gen6_read(16)
__gen6_read(32)
__gen6_read(64)
#undef __gen9_read
#undef __chv_read
#undef __vlv_read
#undef __gen6_read
#undef GEN6_READ_FOOTER
#undef GEN6_READ_HEADER
#define VGPU_READ_HEADER(x) \
unsigned long irqflags; \
u##x val = 0; \
assert_rpm_device_not_suspended(dev_priv); \
spin_lock_irqsave(&dev_priv->uncore.lock, irqflags)
#define VGPU_READ_FOOTER \
spin_unlock_irqrestore(&dev_priv->uncore.lock, irqflags); \
trace_i915_reg_rw(false, reg, val, sizeof(val), trace); \
return val
#define __vgpu_read(x) \
static u##x \
drm/i915: Type safe register read/write Make I915_READ and I915_WRITE more type safe by wrapping the register offset in a struct. This should eliminate most of the fumbles we've had with misplaced parens. This only takes care of normal mmio registers. We could extend the idea to other register types and define each with its own struct. That way you wouldn't be able to accidentally pass the wrong thing to a specific register access function. The gpio_reg setup is probably the ugliest thing left. But I figure I'd just leave it for now, and wait for some divine inspiration to strike before making it nice. As for the generated code, it's actually a bit better sometimes. Eg. looking at i915_irq_handler(), we can see the following change: lea 0x70024(%rdx,%rax,1),%r9d mov $0x1,%edx - movslq %r9d,%r9 - mov %r9,%rsi - mov %r9,-0x58(%rbp) - callq *0xd8(%rbx) + mov %r9d,%esi + mov %r9d,-0x48(%rbp) callq *0xd8(%rbx) So previously gcc thought the register offset might be signed and decided to sign extend it, just in case. The rest appears to be mostly just minor shuffling of instructions. v2: i915_mmio_reg_{offset,equal,valid}() helpers added s/_REG/_MMIO/ in the register defines mo more switch statements left to worry about ring_emit stuff got sorted in a prep patch cmd parser, lrc context and w/a batch buildup also in prep patch vgpu stuff cleaned up and moved to a prep patch all other unrelated changes split out v3: Rebased due to BXT DSI/BLC, MOCS, etc. v4: Rebased due to churn, s/i915_mmio_reg_t/i915_reg_t/ Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Link: http://patchwork.freedesktop.org/patch/msgid/1447853606-2751-1-git-send-email-ville.syrjala@linux.intel.com
2015-11-18 21:33:26 +08:00
vgpu_read##x(struct drm_i915_private *dev_priv, i915_reg_t reg, bool trace) { \
VGPU_READ_HEADER(x); \
val = __raw_i915_read##x(dev_priv, reg); \
VGPU_READ_FOOTER; \
}
__vgpu_read(8)
__vgpu_read(16)
__vgpu_read(32)
__vgpu_read(64)
#undef __vgpu_read
#undef VGPU_READ_FOOTER
#undef VGPU_READ_HEADER
#define GEN2_WRITE_HEADER \
trace_i915_reg_rw(true, reg, val, sizeof(val), trace); \
assert_rpm_wakelock_held(dev_priv); \
#define GEN2_WRITE_FOOTER
#define __gen2_write(x) \
static void \
drm/i915: Type safe register read/write Make I915_READ and I915_WRITE more type safe by wrapping the register offset in a struct. This should eliminate most of the fumbles we've had with misplaced parens. This only takes care of normal mmio registers. We could extend the idea to other register types and define each with its own struct. That way you wouldn't be able to accidentally pass the wrong thing to a specific register access function. The gpio_reg setup is probably the ugliest thing left. But I figure I'd just leave it for now, and wait for some divine inspiration to strike before making it nice. As for the generated code, it's actually a bit better sometimes. Eg. looking at i915_irq_handler(), we can see the following change: lea 0x70024(%rdx,%rax,1),%r9d mov $0x1,%edx - movslq %r9d,%r9 - mov %r9,%rsi - mov %r9,-0x58(%rbp) - callq *0xd8(%rbx) + mov %r9d,%esi + mov %r9d,-0x48(%rbp) callq *0xd8(%rbx) So previously gcc thought the register offset might be signed and decided to sign extend it, just in case. The rest appears to be mostly just minor shuffling of instructions. v2: i915_mmio_reg_{offset,equal,valid}() helpers added s/_REG/_MMIO/ in the register defines mo more switch statements left to worry about ring_emit stuff got sorted in a prep patch cmd parser, lrc context and w/a batch buildup also in prep patch vgpu stuff cleaned up and moved to a prep patch all other unrelated changes split out v3: Rebased due to BXT DSI/BLC, MOCS, etc. v4: Rebased due to churn, s/i915_mmio_reg_t/i915_reg_t/ Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Link: http://patchwork.freedesktop.org/patch/msgid/1447853606-2751-1-git-send-email-ville.syrjala@linux.intel.com
2015-11-18 21:33:26 +08:00
gen2_write##x(struct drm_i915_private *dev_priv, i915_reg_t reg, u##x val, bool trace) { \
GEN2_WRITE_HEADER; \
__raw_i915_write##x(dev_priv, reg, val); \
GEN2_WRITE_FOOTER; \
}
#define __gen5_write(x) \
static void \
drm/i915: Type safe register read/write Make I915_READ and I915_WRITE more type safe by wrapping the register offset in a struct. This should eliminate most of the fumbles we've had with misplaced parens. This only takes care of normal mmio registers. We could extend the idea to other register types and define each with its own struct. That way you wouldn't be able to accidentally pass the wrong thing to a specific register access function. The gpio_reg setup is probably the ugliest thing left. But I figure I'd just leave it for now, and wait for some divine inspiration to strike before making it nice. As for the generated code, it's actually a bit better sometimes. Eg. looking at i915_irq_handler(), we can see the following change: lea 0x70024(%rdx,%rax,1),%r9d mov $0x1,%edx - movslq %r9d,%r9 - mov %r9,%rsi - mov %r9,-0x58(%rbp) - callq *0xd8(%rbx) + mov %r9d,%esi + mov %r9d,-0x48(%rbp) callq *0xd8(%rbx) So previously gcc thought the register offset might be signed and decided to sign extend it, just in case. The rest appears to be mostly just minor shuffling of instructions. v2: i915_mmio_reg_{offset,equal,valid}() helpers added s/_REG/_MMIO/ in the register defines mo more switch statements left to worry about ring_emit stuff got sorted in a prep patch cmd parser, lrc context and w/a batch buildup also in prep patch vgpu stuff cleaned up and moved to a prep patch all other unrelated changes split out v3: Rebased due to BXT DSI/BLC, MOCS, etc. v4: Rebased due to churn, s/i915_mmio_reg_t/i915_reg_t/ Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Link: http://patchwork.freedesktop.org/patch/msgid/1447853606-2751-1-git-send-email-ville.syrjala@linux.intel.com
2015-11-18 21:33:26 +08:00
gen5_write##x(struct drm_i915_private *dev_priv, i915_reg_t reg, u##x val, bool trace) { \
GEN2_WRITE_HEADER; \
ilk_dummy_write(dev_priv); \
__raw_i915_write##x(dev_priv, reg, val); \
GEN2_WRITE_FOOTER; \
}
__gen5_write(8)
__gen5_write(16)
__gen5_write(32)
__gen5_write(64)
__gen2_write(8)
__gen2_write(16)
__gen2_write(32)
__gen2_write(64)
#undef __gen5_write
#undef __gen2_write
#undef GEN2_WRITE_FOOTER
#undef GEN2_WRITE_HEADER
#define GEN6_WRITE_HEADER \
drm/i915: Type safe register read/write Make I915_READ and I915_WRITE more type safe by wrapping the register offset in a struct. This should eliminate most of the fumbles we've had with misplaced parens. This only takes care of normal mmio registers. We could extend the idea to other register types and define each with its own struct. That way you wouldn't be able to accidentally pass the wrong thing to a specific register access function. The gpio_reg setup is probably the ugliest thing left. But I figure I'd just leave it for now, and wait for some divine inspiration to strike before making it nice. As for the generated code, it's actually a bit better sometimes. Eg. looking at i915_irq_handler(), we can see the following change: lea 0x70024(%rdx,%rax,1),%r9d mov $0x1,%edx - movslq %r9d,%r9 - mov %r9,%rsi - mov %r9,-0x58(%rbp) - callq *0xd8(%rbx) + mov %r9d,%esi + mov %r9d,-0x48(%rbp) callq *0xd8(%rbx) So previously gcc thought the register offset might be signed and decided to sign extend it, just in case. The rest appears to be mostly just minor shuffling of instructions. v2: i915_mmio_reg_{offset,equal,valid}() helpers added s/_REG/_MMIO/ in the register defines mo more switch statements left to worry about ring_emit stuff got sorted in a prep patch cmd parser, lrc context and w/a batch buildup also in prep patch vgpu stuff cleaned up and moved to a prep patch all other unrelated changes split out v3: Rebased due to BXT DSI/BLC, MOCS, etc. v4: Rebased due to churn, s/i915_mmio_reg_t/i915_reg_t/ Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Link: http://patchwork.freedesktop.org/patch/msgid/1447853606-2751-1-git-send-email-ville.syrjala@linux.intel.com
2015-11-18 21:33:26 +08:00
u32 offset = i915_mmio_reg_offset(reg); \
unsigned long irqflags; \
trace_i915_reg_rw(true, reg, val, sizeof(val), trace); \
assert_rpm_wakelock_held(dev_priv); \
spin_lock_irqsave(&dev_priv->uncore.lock, irqflags); \
unclaimed_reg_debug(dev_priv, reg, false, true)
#define GEN6_WRITE_FOOTER \
unclaimed_reg_debug(dev_priv, reg, false, false); \
spin_unlock_irqrestore(&dev_priv->uncore.lock, irqflags)
#define __gen6_write(x) \
static void \
drm/i915: Type safe register read/write Make I915_READ and I915_WRITE more type safe by wrapping the register offset in a struct. This should eliminate most of the fumbles we've had with misplaced parens. This only takes care of normal mmio registers. We could extend the idea to other register types and define each with its own struct. That way you wouldn't be able to accidentally pass the wrong thing to a specific register access function. The gpio_reg setup is probably the ugliest thing left. But I figure I'd just leave it for now, and wait for some divine inspiration to strike before making it nice. As for the generated code, it's actually a bit better sometimes. Eg. looking at i915_irq_handler(), we can see the following change: lea 0x70024(%rdx,%rax,1),%r9d mov $0x1,%edx - movslq %r9d,%r9 - mov %r9,%rsi - mov %r9,-0x58(%rbp) - callq *0xd8(%rbx) + mov %r9d,%esi + mov %r9d,-0x48(%rbp) callq *0xd8(%rbx) So previously gcc thought the register offset might be signed and decided to sign extend it, just in case. The rest appears to be mostly just minor shuffling of instructions. v2: i915_mmio_reg_{offset,equal,valid}() helpers added s/_REG/_MMIO/ in the register defines mo more switch statements left to worry about ring_emit stuff got sorted in a prep patch cmd parser, lrc context and w/a batch buildup also in prep patch vgpu stuff cleaned up and moved to a prep patch all other unrelated changes split out v3: Rebased due to BXT DSI/BLC, MOCS, etc. v4: Rebased due to churn, s/i915_mmio_reg_t/i915_reg_t/ Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Link: http://patchwork.freedesktop.org/patch/msgid/1447853606-2751-1-git-send-email-ville.syrjala@linux.intel.com
2015-11-18 21:33:26 +08:00
gen6_write##x(struct drm_i915_private *dev_priv, i915_reg_t reg, u##x val, bool trace) { \
u32 __fifo_ret = 0; \
GEN6_WRITE_HEADER; \
if (NEEDS_FORCE_WAKE(offset)) { \
__fifo_ret = __gen6_gt_wait_for_fifo(dev_priv); \
} \
__raw_i915_write##x(dev_priv, reg, val); \
if (unlikely(__fifo_ret)) { \
gen6_gt_check_fifodbg(dev_priv); \
} \
GEN6_WRITE_FOOTER; \
}
#define __hsw_write(x) \
static void \
drm/i915: Type safe register read/write Make I915_READ and I915_WRITE more type safe by wrapping the register offset in a struct. This should eliminate most of the fumbles we've had with misplaced parens. This only takes care of normal mmio registers. We could extend the idea to other register types and define each with its own struct. That way you wouldn't be able to accidentally pass the wrong thing to a specific register access function. The gpio_reg setup is probably the ugliest thing left. But I figure I'd just leave it for now, and wait for some divine inspiration to strike before making it nice. As for the generated code, it's actually a bit better sometimes. Eg. looking at i915_irq_handler(), we can see the following change: lea 0x70024(%rdx,%rax,1),%r9d mov $0x1,%edx - movslq %r9d,%r9 - mov %r9,%rsi - mov %r9,-0x58(%rbp) - callq *0xd8(%rbx) + mov %r9d,%esi + mov %r9d,-0x48(%rbp) callq *0xd8(%rbx) So previously gcc thought the register offset might be signed and decided to sign extend it, just in case. The rest appears to be mostly just minor shuffling of instructions. v2: i915_mmio_reg_{offset,equal,valid}() helpers added s/_REG/_MMIO/ in the register defines mo more switch statements left to worry about ring_emit stuff got sorted in a prep patch cmd parser, lrc context and w/a batch buildup also in prep patch vgpu stuff cleaned up and moved to a prep patch all other unrelated changes split out v3: Rebased due to BXT DSI/BLC, MOCS, etc. v4: Rebased due to churn, s/i915_mmio_reg_t/i915_reg_t/ Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Link: http://patchwork.freedesktop.org/patch/msgid/1447853606-2751-1-git-send-email-ville.syrjala@linux.intel.com
2015-11-18 21:33:26 +08:00
hsw_write##x(struct drm_i915_private *dev_priv, i915_reg_t reg, u##x val, bool trace) { \
u32 __fifo_ret = 0; \
GEN6_WRITE_HEADER; \
if (NEEDS_FORCE_WAKE(offset)) { \
__fifo_ret = __gen6_gt_wait_for_fifo(dev_priv); \
} \
__raw_i915_write##x(dev_priv, reg, val); \
if (unlikely(__fifo_ret)) { \
gen6_gt_check_fifodbg(dev_priv); \
} \
GEN6_WRITE_FOOTER; \
}
drm/i915/bdw: Handle forcewake for writes on gen8 GEN8 removes the GT FIFO which we've all come to know and love. Instead it offers a wider range of optimized registers which always keep a shadowed copy, and are fed to the GPU when it wakes. How this is implemented in hardware is still somewhat of a mystery. As far as I can tell, the basic design is as follows: If the register is not optimized, you must use the old forcewake mechanism to bring the GT out of sleep. [1] If register is in the optimized list the write will signal that the GT should begin to come out of whatever sleep state it is in. While the GT is coming out of sleep, the requested write will be stored in an intermediate shadow register. Do to the fact that the implementation details are not clear, I see several risks: 1. Order is not preserved as it is with GT FIFO. If we issue multiple writes to optimized registers, where order matters, we may need to serialize it with forcewake. 2. The optimized registers have only 1 shadowed slot, meaning if we issue multiple writes to the same register, and those values need to reach the GPU in order, forcewake will be required. [1] We could implement a SW queue the way the GT FIFO used to work if desired. NOTE: Compile tested only until we get real silicon. v2: - Use a default case to make future platforms also work. - Get rid of IS_BROADWELL since that's not yet defined, but we want to MMIO as soon as possible. v3: Apply suggestions from Mika's review: - s/optimized/shadowed/ - invert the logic of the helper so that it does what it says (the code itself was correct, just confusing to read). v4: - Squash in lost break. Signed-off-by: Ben Widawsky <ben@bwidawsk.net> (v1) Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-11-03 12:07:00 +08:00
#define __gen8_write(x) \
static void \
drm/i915: Type safe register read/write Make I915_READ and I915_WRITE more type safe by wrapping the register offset in a struct. This should eliminate most of the fumbles we've had with misplaced parens. This only takes care of normal mmio registers. We could extend the idea to other register types and define each with its own struct. That way you wouldn't be able to accidentally pass the wrong thing to a specific register access function. The gpio_reg setup is probably the ugliest thing left. But I figure I'd just leave it for now, and wait for some divine inspiration to strike before making it nice. As for the generated code, it's actually a bit better sometimes. Eg. looking at i915_irq_handler(), we can see the following change: lea 0x70024(%rdx,%rax,1),%r9d mov $0x1,%edx - movslq %r9d,%r9 - mov %r9,%rsi - mov %r9,-0x58(%rbp) - callq *0xd8(%rbx) + mov %r9d,%esi + mov %r9d,-0x48(%rbp) callq *0xd8(%rbx) So previously gcc thought the register offset might be signed and decided to sign extend it, just in case. The rest appears to be mostly just minor shuffling of instructions. v2: i915_mmio_reg_{offset,equal,valid}() helpers added s/_REG/_MMIO/ in the register defines mo more switch statements left to worry about ring_emit stuff got sorted in a prep patch cmd parser, lrc context and w/a batch buildup also in prep patch vgpu stuff cleaned up and moved to a prep patch all other unrelated changes split out v3: Rebased due to BXT DSI/BLC, MOCS, etc. v4: Rebased due to churn, s/i915_mmio_reg_t/i915_reg_t/ Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Link: http://patchwork.freedesktop.org/patch/msgid/1447853606-2751-1-git-send-email-ville.syrjala@linux.intel.com
2015-11-18 21:33:26 +08:00
gen8_write##x(struct drm_i915_private *dev_priv, i915_reg_t reg, u##x val, bool trace) { \
enum forcewake_domains fw_engine; \
GEN6_WRITE_HEADER; \
fw_engine = __gen8_reg_write_fw_domains(offset); \
if (fw_engine) \
__force_wake_auto(dev_priv, fw_engine); \
__raw_i915_write##x(dev_priv, reg, val); \
GEN6_WRITE_FOOTER; \
drm/i915/bdw: Handle forcewake for writes on gen8 GEN8 removes the GT FIFO which we've all come to know and love. Instead it offers a wider range of optimized registers which always keep a shadowed copy, and are fed to the GPU when it wakes. How this is implemented in hardware is still somewhat of a mystery. As far as I can tell, the basic design is as follows: If the register is not optimized, you must use the old forcewake mechanism to bring the GT out of sleep. [1] If register is in the optimized list the write will signal that the GT should begin to come out of whatever sleep state it is in. While the GT is coming out of sleep, the requested write will be stored in an intermediate shadow register. Do to the fact that the implementation details are not clear, I see several risks: 1. Order is not preserved as it is with GT FIFO. If we issue multiple writes to optimized registers, where order matters, we may need to serialize it with forcewake. 2. The optimized registers have only 1 shadowed slot, meaning if we issue multiple writes to the same register, and those values need to reach the GPU in order, forcewake will be required. [1] We could implement a SW queue the way the GT FIFO used to work if desired. NOTE: Compile tested only until we get real silicon. v2: - Use a default case to make future platforms also work. - Get rid of IS_BROADWELL since that's not yet defined, but we want to MMIO as soon as possible. v3: Apply suggestions from Mika's review: - s/optimized/shadowed/ - invert the logic of the helper so that it does what it says (the code itself was correct, just confusing to read). v4: - Squash in lost break. Signed-off-by: Ben Widawsky <ben@bwidawsk.net> (v1) Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-11-03 12:07:00 +08:00
}
#define __chv_write(x) \
static void \
drm/i915: Type safe register read/write Make I915_READ and I915_WRITE more type safe by wrapping the register offset in a struct. This should eliminate most of the fumbles we've had with misplaced parens. This only takes care of normal mmio registers. We could extend the idea to other register types and define each with its own struct. That way you wouldn't be able to accidentally pass the wrong thing to a specific register access function. The gpio_reg setup is probably the ugliest thing left. But I figure I'd just leave it for now, and wait for some divine inspiration to strike before making it nice. As for the generated code, it's actually a bit better sometimes. Eg. looking at i915_irq_handler(), we can see the following change: lea 0x70024(%rdx,%rax,1),%r9d mov $0x1,%edx - movslq %r9d,%r9 - mov %r9,%rsi - mov %r9,-0x58(%rbp) - callq *0xd8(%rbx) + mov %r9d,%esi + mov %r9d,-0x48(%rbp) callq *0xd8(%rbx) So previously gcc thought the register offset might be signed and decided to sign extend it, just in case. The rest appears to be mostly just minor shuffling of instructions. v2: i915_mmio_reg_{offset,equal,valid}() helpers added s/_REG/_MMIO/ in the register defines mo more switch statements left to worry about ring_emit stuff got sorted in a prep patch cmd parser, lrc context and w/a batch buildup also in prep patch vgpu stuff cleaned up and moved to a prep patch all other unrelated changes split out v3: Rebased due to BXT DSI/BLC, MOCS, etc. v4: Rebased due to churn, s/i915_mmio_reg_t/i915_reg_t/ Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Link: http://patchwork.freedesktop.org/patch/msgid/1447853606-2751-1-git-send-email-ville.syrjala@linux.intel.com
2015-11-18 21:33:26 +08:00
chv_write##x(struct drm_i915_private *dev_priv, i915_reg_t reg, u##x val, bool trace) { \
enum forcewake_domains fw_engine; \
GEN6_WRITE_HEADER; \
fw_engine = __chv_reg_write_fw_domains(offset); \
if (fw_engine) \
__force_wake_auto(dev_priv, fw_engine); \
__raw_i915_write##x(dev_priv, reg, val); \
GEN6_WRITE_FOOTER; \
}
#define __gen9_write(x) \
static void \
drm/i915: Type safe register read/write Make I915_READ and I915_WRITE more type safe by wrapping the register offset in a struct. This should eliminate most of the fumbles we've had with misplaced parens. This only takes care of normal mmio registers. We could extend the idea to other register types and define each with its own struct. That way you wouldn't be able to accidentally pass the wrong thing to a specific register access function. The gpio_reg setup is probably the ugliest thing left. But I figure I'd just leave it for now, and wait for some divine inspiration to strike before making it nice. As for the generated code, it's actually a bit better sometimes. Eg. looking at i915_irq_handler(), we can see the following change: lea 0x70024(%rdx,%rax,1),%r9d mov $0x1,%edx - movslq %r9d,%r9 - mov %r9,%rsi - mov %r9,-0x58(%rbp) - callq *0xd8(%rbx) + mov %r9d,%esi + mov %r9d,-0x48(%rbp) callq *0xd8(%rbx) So previously gcc thought the register offset might be signed and decided to sign extend it, just in case. The rest appears to be mostly just minor shuffling of instructions. v2: i915_mmio_reg_{offset,equal,valid}() helpers added s/_REG/_MMIO/ in the register defines mo more switch statements left to worry about ring_emit stuff got sorted in a prep patch cmd parser, lrc context and w/a batch buildup also in prep patch vgpu stuff cleaned up and moved to a prep patch all other unrelated changes split out v3: Rebased due to BXT DSI/BLC, MOCS, etc. v4: Rebased due to churn, s/i915_mmio_reg_t/i915_reg_t/ Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Link: http://patchwork.freedesktop.org/patch/msgid/1447853606-2751-1-git-send-email-ville.syrjala@linux.intel.com
2015-11-18 21:33:26 +08:00
gen9_write##x(struct drm_i915_private *dev_priv, i915_reg_t reg, u##x val, \
bool trace) { \
enum forcewake_domains fw_engine; \
GEN6_WRITE_HEADER; \
fw_engine = __gen9_reg_write_fw_domains(offset); \
if (fw_engine) \
__force_wake_auto(dev_priv, fw_engine); \
__raw_i915_write##x(dev_priv, reg, val); \
GEN6_WRITE_FOOTER; \
}
__gen9_write(8)
__gen9_write(16)
__gen9_write(32)
__gen9_write(64)
__chv_write(8)
__chv_write(16)
__chv_write(32)
__chv_write(64)
drm/i915/bdw: Handle forcewake for writes on gen8 GEN8 removes the GT FIFO which we've all come to know and love. Instead it offers a wider range of optimized registers which always keep a shadowed copy, and are fed to the GPU when it wakes. How this is implemented in hardware is still somewhat of a mystery. As far as I can tell, the basic design is as follows: If the register is not optimized, you must use the old forcewake mechanism to bring the GT out of sleep. [1] If register is in the optimized list the write will signal that the GT should begin to come out of whatever sleep state it is in. While the GT is coming out of sleep, the requested write will be stored in an intermediate shadow register. Do to the fact that the implementation details are not clear, I see several risks: 1. Order is not preserved as it is with GT FIFO. If we issue multiple writes to optimized registers, where order matters, we may need to serialize it with forcewake. 2. The optimized registers have only 1 shadowed slot, meaning if we issue multiple writes to the same register, and those values need to reach the GPU in order, forcewake will be required. [1] We could implement a SW queue the way the GT FIFO used to work if desired. NOTE: Compile tested only until we get real silicon. v2: - Use a default case to make future platforms also work. - Get rid of IS_BROADWELL since that's not yet defined, but we want to MMIO as soon as possible. v3: Apply suggestions from Mika's review: - s/optimized/shadowed/ - invert the logic of the helper so that it does what it says (the code itself was correct, just confusing to read). v4: - Squash in lost break. Signed-off-by: Ben Widawsky <ben@bwidawsk.net> (v1) Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-11-03 12:07:00 +08:00
__gen8_write(8)
__gen8_write(16)
__gen8_write(32)
__gen8_write(64)
__hsw_write(8)
__hsw_write(16)
__hsw_write(32)
__hsw_write(64)
__gen6_write(8)
__gen6_write(16)
__gen6_write(32)
__gen6_write(64)
#undef __gen9_write
#undef __chv_write
drm/i915/bdw: Handle forcewake for writes on gen8 GEN8 removes the GT FIFO which we've all come to know and love. Instead it offers a wider range of optimized registers which always keep a shadowed copy, and are fed to the GPU when it wakes. How this is implemented in hardware is still somewhat of a mystery. As far as I can tell, the basic design is as follows: If the register is not optimized, you must use the old forcewake mechanism to bring the GT out of sleep. [1] If register is in the optimized list the write will signal that the GT should begin to come out of whatever sleep state it is in. While the GT is coming out of sleep, the requested write will be stored in an intermediate shadow register. Do to the fact that the implementation details are not clear, I see several risks: 1. Order is not preserved as it is with GT FIFO. If we issue multiple writes to optimized registers, where order matters, we may need to serialize it with forcewake. 2. The optimized registers have only 1 shadowed slot, meaning if we issue multiple writes to the same register, and those values need to reach the GPU in order, forcewake will be required. [1] We could implement a SW queue the way the GT FIFO used to work if desired. NOTE: Compile tested only until we get real silicon. v2: - Use a default case to make future platforms also work. - Get rid of IS_BROADWELL since that's not yet defined, but we want to MMIO as soon as possible. v3: Apply suggestions from Mika's review: - s/optimized/shadowed/ - invert the logic of the helper so that it does what it says (the code itself was correct, just confusing to read). v4: - Squash in lost break. Signed-off-by: Ben Widawsky <ben@bwidawsk.net> (v1) Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-11-03 12:07:00 +08:00
#undef __gen8_write
#undef __hsw_write
#undef __gen6_write
#undef GEN6_WRITE_FOOTER
#undef GEN6_WRITE_HEADER
#define VGPU_WRITE_HEADER \
unsigned long irqflags; \
trace_i915_reg_rw(true, reg, val, sizeof(val), trace); \
assert_rpm_device_not_suspended(dev_priv); \
spin_lock_irqsave(&dev_priv->uncore.lock, irqflags)
#define VGPU_WRITE_FOOTER \
spin_unlock_irqrestore(&dev_priv->uncore.lock, irqflags)
#define __vgpu_write(x) \
static void vgpu_write##x(struct drm_i915_private *dev_priv, \
drm/i915: Type safe register read/write Make I915_READ and I915_WRITE more type safe by wrapping the register offset in a struct. This should eliminate most of the fumbles we've had with misplaced parens. This only takes care of normal mmio registers. We could extend the idea to other register types and define each with its own struct. That way you wouldn't be able to accidentally pass the wrong thing to a specific register access function. The gpio_reg setup is probably the ugliest thing left. But I figure I'd just leave it for now, and wait for some divine inspiration to strike before making it nice. As for the generated code, it's actually a bit better sometimes. Eg. looking at i915_irq_handler(), we can see the following change: lea 0x70024(%rdx,%rax,1),%r9d mov $0x1,%edx - movslq %r9d,%r9 - mov %r9,%rsi - mov %r9,-0x58(%rbp) - callq *0xd8(%rbx) + mov %r9d,%esi + mov %r9d,-0x48(%rbp) callq *0xd8(%rbx) So previously gcc thought the register offset might be signed and decided to sign extend it, just in case. The rest appears to be mostly just minor shuffling of instructions. v2: i915_mmio_reg_{offset,equal,valid}() helpers added s/_REG/_MMIO/ in the register defines mo more switch statements left to worry about ring_emit stuff got sorted in a prep patch cmd parser, lrc context and w/a batch buildup also in prep patch vgpu stuff cleaned up and moved to a prep patch all other unrelated changes split out v3: Rebased due to BXT DSI/BLC, MOCS, etc. v4: Rebased due to churn, s/i915_mmio_reg_t/i915_reg_t/ Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Link: http://patchwork.freedesktop.org/patch/msgid/1447853606-2751-1-git-send-email-ville.syrjala@linux.intel.com
2015-11-18 21:33:26 +08:00
i915_reg_t reg, u##x val, bool trace) { \
VGPU_WRITE_HEADER; \
__raw_i915_write##x(dev_priv, reg, val); \
VGPU_WRITE_FOOTER; \
}
__vgpu_write(8)
__vgpu_write(16)
__vgpu_write(32)
__vgpu_write(64)
#undef __vgpu_write
#undef VGPU_WRITE_FOOTER
#undef VGPU_WRITE_HEADER
#define ASSIGN_WRITE_MMIO_VFUNCS(x) \
do { \
dev_priv->uncore.funcs.mmio_writeb = x##_write8; \
dev_priv->uncore.funcs.mmio_writew = x##_write16; \
dev_priv->uncore.funcs.mmio_writel = x##_write32; \
dev_priv->uncore.funcs.mmio_writeq = x##_write64; \
} while (0)
#define ASSIGN_READ_MMIO_VFUNCS(x) \
do { \
dev_priv->uncore.funcs.mmio_readb = x##_read8; \
dev_priv->uncore.funcs.mmio_readw = x##_read16; \
dev_priv->uncore.funcs.mmio_readl = x##_read32; \
dev_priv->uncore.funcs.mmio_readq = x##_read64; \
} while (0)
static void fw_domain_init(struct drm_i915_private *dev_priv,
enum forcewake_domain_id domain_id,
drm/i915: Type safe register read/write Make I915_READ and I915_WRITE more type safe by wrapping the register offset in a struct. This should eliminate most of the fumbles we've had with misplaced parens. This only takes care of normal mmio registers. We could extend the idea to other register types and define each with its own struct. That way you wouldn't be able to accidentally pass the wrong thing to a specific register access function. The gpio_reg setup is probably the ugliest thing left. But I figure I'd just leave it for now, and wait for some divine inspiration to strike before making it nice. As for the generated code, it's actually a bit better sometimes. Eg. looking at i915_irq_handler(), we can see the following change: lea 0x70024(%rdx,%rax,1),%r9d mov $0x1,%edx - movslq %r9d,%r9 - mov %r9,%rsi - mov %r9,-0x58(%rbp) - callq *0xd8(%rbx) + mov %r9d,%esi + mov %r9d,-0x48(%rbp) callq *0xd8(%rbx) So previously gcc thought the register offset might be signed and decided to sign extend it, just in case. The rest appears to be mostly just minor shuffling of instructions. v2: i915_mmio_reg_{offset,equal,valid}() helpers added s/_REG/_MMIO/ in the register defines mo more switch statements left to worry about ring_emit stuff got sorted in a prep patch cmd parser, lrc context and w/a batch buildup also in prep patch vgpu stuff cleaned up and moved to a prep patch all other unrelated changes split out v3: Rebased due to BXT DSI/BLC, MOCS, etc. v4: Rebased due to churn, s/i915_mmio_reg_t/i915_reg_t/ Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Link: http://patchwork.freedesktop.org/patch/msgid/1447853606-2751-1-git-send-email-ville.syrjala@linux.intel.com
2015-11-18 21:33:26 +08:00
i915_reg_t reg_set,
i915_reg_t reg_ack)
{
struct intel_uncore_forcewake_domain *d;
if (WARN_ON(domain_id >= FW_DOMAIN_ID_COUNT))
return;
d = &dev_priv->uncore.fw_domain[domain_id];
WARN_ON(d->wake_count);
d->wake_count = 0;
d->reg_set = reg_set;
d->reg_ack = reg_ack;
if (IS_GEN6(dev_priv)) {
d->val_reset = 0;
d->val_set = FORCEWAKE_KERNEL;
d->val_clear = 0;
} else {
/* WaRsClearFWBitsAtReset:bdw,skl */
d->val_reset = _MASKED_BIT_DISABLE(0xffff);
d->val_set = _MASKED_BIT_ENABLE(FORCEWAKE_KERNEL);
d->val_clear = _MASKED_BIT_DISABLE(FORCEWAKE_KERNEL);
}
if (IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv))
d->reg_post = FORCEWAKE_ACK_VLV;
else if (IS_GEN6(dev_priv) || IS_GEN7(dev_priv) || IS_GEN8(dev_priv))
d->reg_post = ECOBUS;
d->i915 = dev_priv;
d->id = domain_id;
BUILD_BUG_ON(FORCEWAKE_RENDER != (1 << FW_DOMAIN_ID_RENDER));
BUILD_BUG_ON(FORCEWAKE_BLITTER != (1 << FW_DOMAIN_ID_BLITTER));
BUILD_BUG_ON(FORCEWAKE_MEDIA != (1 << FW_DOMAIN_ID_MEDIA));
d->mask = 1 << domain_id;
drm/i915: Use consistent forcewake auto-release timeout across kernel configs Because it is based on jiffies, current implementation releases the forcewake at any time between straight away and between 1ms and 10ms, depending on the kernel configuration (CONFIG_HZ). This is probably not what has been desired, since the dynamics of keeping parts of the GPU awake should not be correlated with this kernel configuration parameter. Change the auto-release mechanism to use hrtimers and set the timeout to 1ms with a 1ms of slack. This should make the GPU power consistent across kernel configs, and timer slack should enable some timer coalescing where multiple force-wake domains exist, or with unrelated timers. For GlBench/T-Rex this decreases the number of forcewake releases from ~480 to ~300 per second, and for a heavy combined OGL/OCL test from ~670 to ~360 (HZ=1000 kernel). Even though this reduction can be attributed to the average release period extending from 0-1ms to 1-2ms, as discussed above, it will make the forcewake timeout consistent for different CONFIG_HZ values. Real life measurements with the above workload has shown that, with this patch, both manage to auto-release the forcewake between 2-4 times per 10ms, even though the number of forcewake gets is dramatically different. T-Rex requests between 5-10 explicit gets and 5-10 implict gets in each 10ms period, while the OGL/OCL test requests 250 and 380 times in the same period. The two data points together suggest that the nature of the forwake accesses is bursty and that further changes and potential timeout extensions, or moving the start of timeout from the first to the last automatic forcewake grab, should be carefully measured for power and performance effects. v2: * Commit spelling. (Dave Gordon) * More discussion on numbers in the commit. (Chris Wilson) Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: Dave Gordon <david.s.gordon@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
2016-04-08 00:04:32 +08:00
hrtimer_init(&d->timer, CLOCK_MONOTONIC, HRTIMER_MODE_REL);
d->timer.function = intel_uncore_fw_release_timer;
dev_priv->uncore.fw_domains |= (1 << domain_id);
fw_domain_reset(d);
}
static void intel_uncore_fw_domains_init(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
if (INTEL_INFO(dev_priv)->gen <= 5)
return;
if (IS_GEN9(dev)) {
dev_priv->uncore.funcs.force_wake_get = fw_domains_get;
dev_priv->uncore.funcs.force_wake_put = fw_domains_put;
fw_domain_init(dev_priv, FW_DOMAIN_ID_RENDER,
FORCEWAKE_RENDER_GEN9,
FORCEWAKE_ACK_RENDER_GEN9);
fw_domain_init(dev_priv, FW_DOMAIN_ID_BLITTER,
FORCEWAKE_BLITTER_GEN9,
FORCEWAKE_ACK_BLITTER_GEN9);
fw_domain_init(dev_priv, FW_DOMAIN_ID_MEDIA,
FORCEWAKE_MEDIA_GEN9, FORCEWAKE_ACK_MEDIA_GEN9);
} else if (IS_VALLEYVIEW(dev) || IS_CHERRYVIEW(dev)) {
dev_priv->uncore.funcs.force_wake_get = fw_domains_get;
if (!IS_CHERRYVIEW(dev))
dev_priv->uncore.funcs.force_wake_put =
fw_domains_put_with_fifo;
else
dev_priv->uncore.funcs.force_wake_put = fw_domains_put;
fw_domain_init(dev_priv, FW_DOMAIN_ID_RENDER,
FORCEWAKE_VLV, FORCEWAKE_ACK_VLV);
fw_domain_init(dev_priv, FW_DOMAIN_ID_MEDIA,
FORCEWAKE_MEDIA_VLV, FORCEWAKE_ACK_MEDIA_VLV);
} else if (IS_HASWELL(dev) || IS_BROADWELL(dev)) {
dev_priv->uncore.funcs.force_wake_get =
fw_domains_get_with_thread_status;
if (IS_HASWELL(dev))
dev_priv->uncore.funcs.force_wake_put =
fw_domains_put_with_fifo;
else
dev_priv->uncore.funcs.force_wake_put = fw_domains_put;
fw_domain_init(dev_priv, FW_DOMAIN_ID_RENDER,
FORCEWAKE_MT, FORCEWAKE_ACK_HSW);
} else if (IS_IVYBRIDGE(dev)) {
u32 ecobus;
/* IVB configs may use multi-threaded forcewake */
/* A small trick here - if the bios hasn't configured
* MT forcewake, and if the device is in RC6, then
* force_wake_mt_get will not wake the device and the
* ECOBUS read will return zero. Which will be
* (correctly) interpreted by the test below as MT
* forcewake being disabled.
*/
dev_priv->uncore.funcs.force_wake_get =
fw_domains_get_with_thread_status;
dev_priv->uncore.funcs.force_wake_put =
fw_domains_put_with_fifo;
/* We need to init first for ECOBUS access and then
* determine later if we want to reinit, in case of MT access is
* not working. In this stage we don't know which flavour this
* ivb is, so it is better to reset also the gen6 fw registers
* before the ecobus check.
*/
__raw_i915_write32(dev_priv, FORCEWAKE, 0);
__raw_posting_read(dev_priv, ECOBUS);
fw_domain_init(dev_priv, FW_DOMAIN_ID_RENDER,
FORCEWAKE_MT, FORCEWAKE_MT_ACK);
mutex_lock(&dev->struct_mutex);
fw_domains_get_with_thread_status(dev_priv, FORCEWAKE_ALL);
ecobus = __raw_i915_read32(dev_priv, ECOBUS);
fw_domains_put_with_fifo(dev_priv, FORCEWAKE_ALL);
mutex_unlock(&dev->struct_mutex);
if (!(ecobus & FORCEWAKE_MT_ENABLE)) {
DRM_INFO("No MT forcewake available on Ivybridge, this can result in issues\n");
DRM_INFO("when using vblank-synced partial screen updates.\n");
fw_domain_init(dev_priv, FW_DOMAIN_ID_RENDER,
FORCEWAKE, FORCEWAKE_ACK);
}
} else if (IS_GEN6(dev)) {
dev_priv->uncore.funcs.force_wake_get =
fw_domains_get_with_thread_status;
dev_priv->uncore.funcs.force_wake_put =
fw_domains_put_with_fifo;
fw_domain_init(dev_priv, FW_DOMAIN_ID_RENDER,
FORCEWAKE, FORCEWAKE_ACK);
}
/* All future platforms are expected to require complex power gating */
WARN_ON(dev_priv->uncore.fw_domains == 0);
}
void intel_uncore_init(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
drm/i915: Introduce a PV INFO page structure for Intel GVT-g. Introduce a PV INFO structure, to facilitate the Intel GVT-g technology, which is a GPU virtualization solution with mediated pass-through. This page contains the shared information between i915 driver and the host emulator. For now, this structure utilizes an area of 4K bytes on HSW GPU's unused MMIO space. Future hardware will have the reserved window architecturally defined, and layout of the page will be added in future BSpec. The i915 driver load routine detects if it is running in a VM by reading the contents of this PV INFO page. Thereafter a flag, vgpu.active is set, and intel_vgpu_active() is used by checking this flag to conclude if GPU is virtualized with Intel GVT-g. By now, intel_vgpu_active() will return true, only when the driver is running as a guest in the Intel GVT-g enhanced environment on HSW platform. v2: take Chris' comments: - call the i915_check_vgpu() in intel_uncore_init() - sanitize i915_check_vgpu() by adding BUILD_BUG_ON() and debug info take Daniel's comments: - put the definition of PV INFO into a new header - i915_vgt_if.h other changes: - access mmio regs by readq/readw in i915_check_vgpu() v3: take Daniel's comments: - move the i915/vgt interfaces into a new i915_vgpu.c - update makefile - add kerneldoc to functions which are non-static - add a DOC: section describing some of the high-level design - update drm docbook other changes: - rename i915_vgt_if.h to i915_vgpu.h v4: take Tvrtko's comments: - fix a typo in commit message - add debug message when vgt version mismatches - rename low_gmadr/high_gmadr to mappable/non-mappable in PV INFO structure Signed-off-by: Yu Zhang <yu.c.zhang@linux.intel.com> Signed-off-by: Jike Song <jike.song@intel.com> Signed-off-by: Eddie Dong <eddie.dong@intel.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-02-10 19:05:47 +08:00
i915_check_vgpu(dev);
intel_uncore_edram_detect(dev_priv);
intel_uncore_fw_domains_init(dev);
__intel_uncore_early_sanitize(dev, false);
dev_priv->uncore.unclaimed_mmio_check = 1;
switch (INTEL_INFO(dev)->gen) {
drm/i915/bdw: Handle forcewake for writes on gen8 GEN8 removes the GT FIFO which we've all come to know and love. Instead it offers a wider range of optimized registers which always keep a shadowed copy, and are fed to the GPU when it wakes. How this is implemented in hardware is still somewhat of a mystery. As far as I can tell, the basic design is as follows: If the register is not optimized, you must use the old forcewake mechanism to bring the GT out of sleep. [1] If register is in the optimized list the write will signal that the GT should begin to come out of whatever sleep state it is in. While the GT is coming out of sleep, the requested write will be stored in an intermediate shadow register. Do to the fact that the implementation details are not clear, I see several risks: 1. Order is not preserved as it is with GT FIFO. If we issue multiple writes to optimized registers, where order matters, we may need to serialize it with forcewake. 2. The optimized registers have only 1 shadowed slot, meaning if we issue multiple writes to the same register, and those values need to reach the GPU in order, forcewake will be required. [1] We could implement a SW queue the way the GT FIFO used to work if desired. NOTE: Compile tested only until we get real silicon. v2: - Use a default case to make future platforms also work. - Get rid of IS_BROADWELL since that's not yet defined, but we want to MMIO as soon as possible. v3: Apply suggestions from Mika's review: - s/optimized/shadowed/ - invert the logic of the helper so that it does what it says (the code itself was correct, just confusing to read). v4: - Squash in lost break. Signed-off-by: Ben Widawsky <ben@bwidawsk.net> (v1) Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-11-03 12:07:00 +08:00
default:
case 9:
ASSIGN_WRITE_MMIO_VFUNCS(gen9);
ASSIGN_READ_MMIO_VFUNCS(gen9);
break;
case 8:
if (IS_CHERRYVIEW(dev)) {
ASSIGN_WRITE_MMIO_VFUNCS(chv);
ASSIGN_READ_MMIO_VFUNCS(chv);
} else {
ASSIGN_WRITE_MMIO_VFUNCS(gen8);
ASSIGN_READ_MMIO_VFUNCS(gen6);
}
drm/i915/bdw: Handle forcewake for writes on gen8 GEN8 removes the GT FIFO which we've all come to know and love. Instead it offers a wider range of optimized registers which always keep a shadowed copy, and are fed to the GPU when it wakes. How this is implemented in hardware is still somewhat of a mystery. As far as I can tell, the basic design is as follows: If the register is not optimized, you must use the old forcewake mechanism to bring the GT out of sleep. [1] If register is in the optimized list the write will signal that the GT should begin to come out of whatever sleep state it is in. While the GT is coming out of sleep, the requested write will be stored in an intermediate shadow register. Do to the fact that the implementation details are not clear, I see several risks: 1. Order is not preserved as it is with GT FIFO. If we issue multiple writes to optimized registers, where order matters, we may need to serialize it with forcewake. 2. The optimized registers have only 1 shadowed slot, meaning if we issue multiple writes to the same register, and those values need to reach the GPU in order, forcewake will be required. [1] We could implement a SW queue the way the GT FIFO used to work if desired. NOTE: Compile tested only until we get real silicon. v2: - Use a default case to make future platforms also work. - Get rid of IS_BROADWELL since that's not yet defined, but we want to MMIO as soon as possible. v3: Apply suggestions from Mika's review: - s/optimized/shadowed/ - invert the logic of the helper so that it does what it says (the code itself was correct, just confusing to read). v4: - Squash in lost break. Signed-off-by: Ben Widawsky <ben@bwidawsk.net> (v1) Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-11-03 12:07:00 +08:00
break;
case 7:
case 6:
if (IS_HASWELL(dev)) {
ASSIGN_WRITE_MMIO_VFUNCS(hsw);
} else {
ASSIGN_WRITE_MMIO_VFUNCS(gen6);
}
if (IS_VALLEYVIEW(dev)) {
ASSIGN_READ_MMIO_VFUNCS(vlv);
} else {
ASSIGN_READ_MMIO_VFUNCS(gen6);
}
break;
case 5:
ASSIGN_WRITE_MMIO_VFUNCS(gen5);
ASSIGN_READ_MMIO_VFUNCS(gen5);
break;
case 4:
case 3:
case 2:
ASSIGN_WRITE_MMIO_VFUNCS(gen2);
ASSIGN_READ_MMIO_VFUNCS(gen2);
break;
}
if (intel_vgpu_active(dev)) {
ASSIGN_WRITE_MMIO_VFUNCS(vgpu);
ASSIGN_READ_MMIO_VFUNCS(vgpu);
}
i915_check_and_clear_faults(dev);
}
#undef ASSIGN_WRITE_MMIO_VFUNCS
#undef ASSIGN_READ_MMIO_VFUNCS
void intel_uncore_fini(struct drm_device *dev)
{
/* Paranoia: make sure we have disabled everything before we exit. */
intel_uncore_sanitize(dev);
intel_uncore_forcewake_reset(dev, false);
}
#define GEN_RANGE(l, h) GENMASK(h, l)
static const struct register_whitelist {
drm/i915: Type safe register read/write Make I915_READ and I915_WRITE more type safe by wrapping the register offset in a struct. This should eliminate most of the fumbles we've had with misplaced parens. This only takes care of normal mmio registers. We could extend the idea to other register types and define each with its own struct. That way you wouldn't be able to accidentally pass the wrong thing to a specific register access function. The gpio_reg setup is probably the ugliest thing left. But I figure I'd just leave it for now, and wait for some divine inspiration to strike before making it nice. As for the generated code, it's actually a bit better sometimes. Eg. looking at i915_irq_handler(), we can see the following change: lea 0x70024(%rdx,%rax,1),%r9d mov $0x1,%edx - movslq %r9d,%r9 - mov %r9,%rsi - mov %r9,-0x58(%rbp) - callq *0xd8(%rbx) + mov %r9d,%esi + mov %r9d,-0x48(%rbp) callq *0xd8(%rbx) So previously gcc thought the register offset might be signed and decided to sign extend it, just in case. The rest appears to be mostly just minor shuffling of instructions. v2: i915_mmio_reg_{offset,equal,valid}() helpers added s/_REG/_MMIO/ in the register defines mo more switch statements left to worry about ring_emit stuff got sorted in a prep patch cmd parser, lrc context and w/a batch buildup also in prep patch vgpu stuff cleaned up and moved to a prep patch all other unrelated changes split out v3: Rebased due to BXT DSI/BLC, MOCS, etc. v4: Rebased due to churn, s/i915_mmio_reg_t/i915_reg_t/ Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Link: http://patchwork.freedesktop.org/patch/msgid/1447853606-2751-1-git-send-email-ville.syrjala@linux.intel.com
2015-11-18 21:33:26 +08:00
i915_reg_t offset_ldw, offset_udw;
uint32_t size;
/* supported gens, 0x10 for 4, 0x30 for 4 and 5, etc. */
uint32_t gen_bitmask;
} whitelist[] = {
{ .offset_ldw = RING_TIMESTAMP(RENDER_RING_BASE),
.offset_udw = RING_TIMESTAMP_UDW(RENDER_RING_BASE),
.size = 8, .gen_bitmask = GEN_RANGE(4, 9) },
};
int i915_reg_read_ioctl(struct drm_device *dev,
void *data, struct drm_file *file)
{
struct drm_i915_private *dev_priv = dev->dev_private;
struct drm_i915_reg_read *reg = data;
struct register_whitelist const *entry = whitelist;
unsigned size;
drm/i915: Type safe register read/write Make I915_READ and I915_WRITE more type safe by wrapping the register offset in a struct. This should eliminate most of the fumbles we've had with misplaced parens. This only takes care of normal mmio registers. We could extend the idea to other register types and define each with its own struct. That way you wouldn't be able to accidentally pass the wrong thing to a specific register access function. The gpio_reg setup is probably the ugliest thing left. But I figure I'd just leave it for now, and wait for some divine inspiration to strike before making it nice. As for the generated code, it's actually a bit better sometimes. Eg. looking at i915_irq_handler(), we can see the following change: lea 0x70024(%rdx,%rax,1),%r9d mov $0x1,%edx - movslq %r9d,%r9 - mov %r9,%rsi - mov %r9,-0x58(%rbp) - callq *0xd8(%rbx) + mov %r9d,%esi + mov %r9d,-0x48(%rbp) callq *0xd8(%rbx) So previously gcc thought the register offset might be signed and decided to sign extend it, just in case. The rest appears to be mostly just minor shuffling of instructions. v2: i915_mmio_reg_{offset,equal,valid}() helpers added s/_REG/_MMIO/ in the register defines mo more switch statements left to worry about ring_emit stuff got sorted in a prep patch cmd parser, lrc context and w/a batch buildup also in prep patch vgpu stuff cleaned up and moved to a prep patch all other unrelated changes split out v3: Rebased due to BXT DSI/BLC, MOCS, etc. v4: Rebased due to churn, s/i915_mmio_reg_t/i915_reg_t/ Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Link: http://patchwork.freedesktop.org/patch/msgid/1447853606-2751-1-git-send-email-ville.syrjala@linux.intel.com
2015-11-18 21:33:26 +08:00
i915_reg_t offset_ldw, offset_udw;
int i, ret = 0;
for (i = 0; i < ARRAY_SIZE(whitelist); i++, entry++) {
drm/i915: Type safe register read/write Make I915_READ and I915_WRITE more type safe by wrapping the register offset in a struct. This should eliminate most of the fumbles we've had with misplaced parens. This only takes care of normal mmio registers. We could extend the idea to other register types and define each with its own struct. That way you wouldn't be able to accidentally pass the wrong thing to a specific register access function. The gpio_reg setup is probably the ugliest thing left. But I figure I'd just leave it for now, and wait for some divine inspiration to strike before making it nice. As for the generated code, it's actually a bit better sometimes. Eg. looking at i915_irq_handler(), we can see the following change: lea 0x70024(%rdx,%rax,1),%r9d mov $0x1,%edx - movslq %r9d,%r9 - mov %r9,%rsi - mov %r9,-0x58(%rbp) - callq *0xd8(%rbx) + mov %r9d,%esi + mov %r9d,-0x48(%rbp) callq *0xd8(%rbx) So previously gcc thought the register offset might be signed and decided to sign extend it, just in case. The rest appears to be mostly just minor shuffling of instructions. v2: i915_mmio_reg_{offset,equal,valid}() helpers added s/_REG/_MMIO/ in the register defines mo more switch statements left to worry about ring_emit stuff got sorted in a prep patch cmd parser, lrc context and w/a batch buildup also in prep patch vgpu stuff cleaned up and moved to a prep patch all other unrelated changes split out v3: Rebased due to BXT DSI/BLC, MOCS, etc. v4: Rebased due to churn, s/i915_mmio_reg_t/i915_reg_t/ Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Link: http://patchwork.freedesktop.org/patch/msgid/1447853606-2751-1-git-send-email-ville.syrjala@linux.intel.com
2015-11-18 21:33:26 +08:00
if (i915_mmio_reg_offset(entry->offset_ldw) == (reg->offset & -entry->size) &&
(1 << INTEL_INFO(dev)->gen & entry->gen_bitmask))
break;
}
if (i == ARRAY_SIZE(whitelist))
return -EINVAL;
/* We use the low bits to encode extra flags as the register should
* be naturally aligned (and those that are not so aligned merely
* limit the available flags for that register).
*/
offset_ldw = entry->offset_ldw;
offset_udw = entry->offset_udw;
size = entry->size;
drm/i915: Type safe register read/write Make I915_READ and I915_WRITE more type safe by wrapping the register offset in a struct. This should eliminate most of the fumbles we've had with misplaced parens. This only takes care of normal mmio registers. We could extend the idea to other register types and define each with its own struct. That way you wouldn't be able to accidentally pass the wrong thing to a specific register access function. The gpio_reg setup is probably the ugliest thing left. But I figure I'd just leave it for now, and wait for some divine inspiration to strike before making it nice. As for the generated code, it's actually a bit better sometimes. Eg. looking at i915_irq_handler(), we can see the following change: lea 0x70024(%rdx,%rax,1),%r9d mov $0x1,%edx - movslq %r9d,%r9 - mov %r9,%rsi - mov %r9,-0x58(%rbp) - callq *0xd8(%rbx) + mov %r9d,%esi + mov %r9d,-0x48(%rbp) callq *0xd8(%rbx) So previously gcc thought the register offset might be signed and decided to sign extend it, just in case. The rest appears to be mostly just minor shuffling of instructions. v2: i915_mmio_reg_{offset,equal,valid}() helpers added s/_REG/_MMIO/ in the register defines mo more switch statements left to worry about ring_emit stuff got sorted in a prep patch cmd parser, lrc context and w/a batch buildup also in prep patch vgpu stuff cleaned up and moved to a prep patch all other unrelated changes split out v3: Rebased due to BXT DSI/BLC, MOCS, etc. v4: Rebased due to churn, s/i915_mmio_reg_t/i915_reg_t/ Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Link: http://patchwork.freedesktop.org/patch/msgid/1447853606-2751-1-git-send-email-ville.syrjala@linux.intel.com
2015-11-18 21:33:26 +08:00
size |= reg->offset ^ i915_mmio_reg_offset(offset_ldw);
intel_runtime_pm_get(dev_priv);
switch (size) {
case 8 | 1:
reg->val = I915_READ64_2x32(offset_ldw, offset_udw);
break;
case 8:
reg->val = I915_READ64(offset_ldw);
break;
case 4:
reg->val = I915_READ(offset_ldw);
break;
case 2:
reg->val = I915_READ16(offset_ldw);
break;
case 1:
reg->val = I915_READ8(offset_ldw);
break;
default:
ret = -EINVAL;
goto out;
}
out:
intel_runtime_pm_put(dev_priv);
return ret;
}
int i915_get_reset_stats_ioctl(struct drm_device *dev,
void *data, struct drm_file *file)
{
struct drm_i915_private *dev_priv = dev->dev_private;
struct drm_i915_reset_stats *args = data;
struct i915_ctx_hang_stats *hs;
struct intel_context *ctx;
int ret;
if (args->flags || args->pad)
return -EINVAL;
drm/i915: Emphasize that ctx->id is merely a user handle This is an Execlists preparatory patch, since they make context ID become an overloaded term: - In the software, it was used to distinguish which context userspace was trying to use. - In the BSpec, the term is used to describe the 20-bits long field the hardware uses to it to discriminate the contexts that are submitted to the ELSP and inform the driver about their current status (via Context Switch Interrupts and Context Status Buffers). Initially, I tried to make the different meanings converge, but it proved impossible: - The software ctx->id is per-filp, while the hardware one needs to be globally unique. - Also, we multiplex several backing states objects per intel_context, and all of them need unique HW IDs. - I tried adding a per-filp ID and then composing the HW context ID as: ctx->id + file_priv->id + ring->id, but the fact that the hardware only uses 20-bits means we have to artificially limit the number of filps or contexts the userspace can create. The ctx->user_handle renaming bits are done with this Cocci patch (plus manual frobbing of the struct declaration): @@ struct intel_context c; @@ - (c).id + c.user_handle @@ struct intel_context *c; @@ - (c)->id + c->user_handle Also, while we are at it, s/DEFAULT_CONTEXT_ID/DEFAULT_CONTEXT_HANDLE and change the type to unsigned 32 bits. v2: s/handle/user_handle and change the type to uint32_t as suggested by Chris Wilson. Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org> (v1) Signed-off-by: Oscar Mateo <oscar.mateo@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-07-03 23:28:00 +08:00
if (args->ctx_id == DEFAULT_CONTEXT_HANDLE && !capable(CAP_SYS_ADMIN))
return -EPERM;
ret = mutex_lock_interruptible(&dev->struct_mutex);
if (ret)
return ret;
drm/i915: Get context early in execbuf We need to have the address space when reserving space for the objects. Since the address space and context are tied together, and reserve occurs before context switch (for good reason), we must lookup our context earlier in the process. This leaves some room for optimizations where we no longer need to use ctx_id in certain places. This will be addressed in a subsequent patch. Important tricky bit: Because slow relocations during execbuffer drop struct_mutex Perhaps it would be best to acquire the reference when we get the context, but I'll save that for another day (note I have written the patch before, and I found the changes required to be uglier than this). Note that since we currently access everything via context id, and not the data structure this is fine, though not desirable. The next change attempts to get the context only once via the context ID idr lookup, and as such, the following can happen: CTX-A is created, refcount = 1 CTX-A execbuf, mutex dropped close IOCTL called on CTX-A, refcount = 0 CTX-A resumes in execbuf. v2: Rebased on top of commit b6359918b885da7c7b58c050674278dbd06020ab Author: Mika Kuoppala <mika.kuoppala@linux.intel.com> Date: Wed Oct 30 15:44:16 2013 +0200 drm/i915: add i915_get_reset_stats_ioctl v3: Rebased on top of commit 25b3dfc87bff80317d67ddd2cd4cfb91e6fe7d79 Author: Mika Westerberg <mika.westerberg@linux.intel.com> Date: Tue Nov 12 11:57:30 2013 +0200 Author: Mika Kuoppala <mika.kuoppala@linux.intel.com> Date: Tue Nov 26 16:14:33 2013 +0200 drm/i915: check context reset stats before relocations Signed-off-by: Ben Widawsky <ben@bwidawsk.net> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-12-07 06:11:21 +08:00
ctx = i915_gem_context_get(file->driver_priv, args->ctx_id);
if (IS_ERR(ctx)) {
mutex_unlock(&dev->struct_mutex);
drm/i915: Get context early in execbuf We need to have the address space when reserving space for the objects. Since the address space and context are tied together, and reserve occurs before context switch (for good reason), we must lookup our context earlier in the process. This leaves some room for optimizations where we no longer need to use ctx_id in certain places. This will be addressed in a subsequent patch. Important tricky bit: Because slow relocations during execbuffer drop struct_mutex Perhaps it would be best to acquire the reference when we get the context, but I'll save that for another day (note I have written the patch before, and I found the changes required to be uglier than this). Note that since we currently access everything via context id, and not the data structure this is fine, though not desirable. The next change attempts to get the context only once via the context ID idr lookup, and as such, the following can happen: CTX-A is created, refcount = 1 CTX-A execbuf, mutex dropped close IOCTL called on CTX-A, refcount = 0 CTX-A resumes in execbuf. v2: Rebased on top of commit b6359918b885da7c7b58c050674278dbd06020ab Author: Mika Kuoppala <mika.kuoppala@linux.intel.com> Date: Wed Oct 30 15:44:16 2013 +0200 drm/i915: add i915_get_reset_stats_ioctl v3: Rebased on top of commit 25b3dfc87bff80317d67ddd2cd4cfb91e6fe7d79 Author: Mika Westerberg <mika.westerberg@linux.intel.com> Date: Tue Nov 12 11:57:30 2013 +0200 Author: Mika Kuoppala <mika.kuoppala@linux.intel.com> Date: Tue Nov 26 16:14:33 2013 +0200 drm/i915: check context reset stats before relocations Signed-off-by: Ben Widawsky <ben@bwidawsk.net> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-12-07 06:11:21 +08:00
return PTR_ERR(ctx);
}
drm/i915: Get context early in execbuf We need to have the address space when reserving space for the objects. Since the address space and context are tied together, and reserve occurs before context switch (for good reason), we must lookup our context earlier in the process. This leaves some room for optimizations where we no longer need to use ctx_id in certain places. This will be addressed in a subsequent patch. Important tricky bit: Because slow relocations during execbuffer drop struct_mutex Perhaps it would be best to acquire the reference when we get the context, but I'll save that for another day (note I have written the patch before, and I found the changes required to be uglier than this). Note that since we currently access everything via context id, and not the data structure this is fine, though not desirable. The next change attempts to get the context only once via the context ID idr lookup, and as such, the following can happen: CTX-A is created, refcount = 1 CTX-A execbuf, mutex dropped close IOCTL called on CTX-A, refcount = 0 CTX-A resumes in execbuf. v2: Rebased on top of commit b6359918b885da7c7b58c050674278dbd06020ab Author: Mika Kuoppala <mika.kuoppala@linux.intel.com> Date: Wed Oct 30 15:44:16 2013 +0200 drm/i915: add i915_get_reset_stats_ioctl v3: Rebased on top of commit 25b3dfc87bff80317d67ddd2cd4cfb91e6fe7d79 Author: Mika Westerberg <mika.westerberg@linux.intel.com> Date: Tue Nov 12 11:57:30 2013 +0200 Author: Mika Kuoppala <mika.kuoppala@linux.intel.com> Date: Tue Nov 26 16:14:33 2013 +0200 drm/i915: check context reset stats before relocations Signed-off-by: Ben Widawsky <ben@bwidawsk.net> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-12-07 06:11:21 +08:00
hs = &ctx->hang_stats;
if (capable(CAP_SYS_ADMIN))
args->reset_count = i915_reset_count(&dev_priv->gpu_error);
else
args->reset_count = 0;
args->batch_active = hs->batch_active;
args->batch_pending = hs->batch_pending;
mutex_unlock(&dev->struct_mutex);
return 0;
}
static int i915_reset_complete(struct drm_device *dev)
{
u8 gdrst;
pci_read_config_byte(dev->pdev, I915_GDRST, &gdrst);
return (gdrst & GRDOM_RESET_STATUS) == 0;
}
static int i915_do_reset(struct drm_device *dev, unsigned engine_mask)
{
/* assert reset for at least 20 usec */
pci_write_config_byte(dev->pdev, I915_GDRST, GRDOM_RESET_ENABLE);
udelay(20);
pci_write_config_byte(dev->pdev, I915_GDRST, 0);
return wait_for(i915_reset_complete(dev), 500);
}
static int g4x_reset_complete(struct drm_device *dev)
{
u8 gdrst;
pci_read_config_byte(dev->pdev, I915_GDRST, &gdrst);
return (gdrst & GRDOM_RESET_ENABLE) == 0;
}
static int g33_do_reset(struct drm_device *dev, unsigned engine_mask)
{
pci_write_config_byte(dev->pdev, I915_GDRST, GRDOM_RESET_ENABLE);
return wait_for(g4x_reset_complete(dev), 500);
}
static int g4x_do_reset(struct drm_device *dev, unsigned engine_mask)
{
struct drm_i915_private *dev_priv = dev->dev_private;
int ret;
pci_write_config_byte(dev->pdev, I915_GDRST,
GRDOM_RENDER | GRDOM_RESET_ENABLE);
ret = wait_for(g4x_reset_complete(dev), 500);
if (ret)
return ret;
/* WaVcpClkGateDisableForMediaReset:ctg,elk */
I915_WRITE(VDECCLK_GATE_D, I915_READ(VDECCLK_GATE_D) | VCP_UNIT_CLOCK_GATE_DISABLE);
POSTING_READ(VDECCLK_GATE_D);
pci_write_config_byte(dev->pdev, I915_GDRST,
GRDOM_MEDIA | GRDOM_RESET_ENABLE);
ret = wait_for(g4x_reset_complete(dev), 500);
if (ret)
return ret;
/* WaVcpClkGateDisableForMediaReset:ctg,elk */
I915_WRITE(VDECCLK_GATE_D, I915_READ(VDECCLK_GATE_D) & ~VCP_UNIT_CLOCK_GATE_DISABLE);
POSTING_READ(VDECCLK_GATE_D);
pci_write_config_byte(dev->pdev, I915_GDRST, 0);
return 0;
}
static int ironlake_do_reset(struct drm_device *dev, unsigned engine_mask)
{
struct drm_i915_private *dev_priv = dev->dev_private;
int ret;
I915_WRITE(ILK_GDSR,
ILK_GRDOM_RENDER | ILK_GRDOM_RESET_ENABLE);
ret = wait_for((I915_READ(ILK_GDSR) &
ILK_GRDOM_RESET_ENABLE) == 0, 500);
if (ret)
return ret;
I915_WRITE(ILK_GDSR,
ILK_GRDOM_MEDIA | ILK_GRDOM_RESET_ENABLE);
ret = wait_for((I915_READ(ILK_GDSR) &
ILK_GRDOM_RESET_ENABLE) == 0, 500);
if (ret)
return ret;
I915_WRITE(ILK_GDSR, 0);
return 0;
}
/* Reset the hardware domains (GENX_GRDOM_*) specified by mask */
static int gen6_hw_domain_reset(struct drm_i915_private *dev_priv,
u32 hw_domain_mask)
{
int ret;
/* GEN6_GDRST is not in the gt power well, no need to check
* for fifo space for the write or forcewake the chip for
* the read
*/
__raw_i915_write32(dev_priv, GEN6_GDRST, hw_domain_mask);
#define ACKED ((__raw_i915_read32(dev_priv, GEN6_GDRST) & hw_domain_mask) == 0)
/* Spin waiting for the device to ack the reset requests */
ret = wait_for(ACKED, 500);
#undef ACKED
return ret;
}
/**
* gen6_reset_engines - reset individual engines
* @dev: DRM device
* @engine_mask: mask of intel_ring_flag() engines or ALL_ENGINES for full reset
*
* This function will reset the individual engines that are set in engine_mask.
* If you provide ALL_ENGINES as mask, full global domain reset will be issued.
*
* Note: It is responsibility of the caller to handle the difference between
* asking full domain reset versus reset for all available individual engines.
*
* Returns 0 on success, nonzero on error.
*/
static int gen6_reset_engines(struct drm_device *dev, unsigned engine_mask)
{
struct drm_i915_private *dev_priv = dev->dev_private;
struct intel_engine_cs *engine;
const u32 hw_engine_mask[I915_NUM_ENGINES] = {
[RCS] = GEN6_GRDOM_RENDER,
[BCS] = GEN6_GRDOM_BLT,
[VCS] = GEN6_GRDOM_MEDIA,
[VCS2] = GEN8_GRDOM_MEDIA2,
[VECS] = GEN6_GRDOM_VECS,
};
u32 hw_mask;
int ret;
if (engine_mask == ALL_ENGINES) {
hw_mask = GEN6_GRDOM_FULL;
} else {
hw_mask = 0;
for_each_engine_masked(engine, dev_priv, engine_mask)
hw_mask |= hw_engine_mask[engine->id];
}
ret = gen6_hw_domain_reset(dev_priv, hw_mask);
intel_uncore_forcewake_reset(dev, true);
return ret;
}
static int wait_for_register_fw(struct drm_i915_private *dev_priv,
i915_reg_t reg,
const u32 mask,
const u32 value,
const unsigned long timeout_ms)
2015-06-18 17:51:40 +08:00
{
return wait_for((I915_READ_FW(reg) & mask) == value, timeout_ms);
}
static int gen8_request_engine_reset(struct intel_engine_cs *engine)
{
int ret;
struct drm_i915_private *dev_priv = engine->dev->dev_private;
I915_WRITE_FW(RING_RESET_CTL(engine->mmio_base),
_MASKED_BIT_ENABLE(RESET_CTL_REQUEST_RESET));
ret = wait_for_register_fw(dev_priv,
RING_RESET_CTL(engine->mmio_base),
RESET_CTL_READY_TO_RESET,
RESET_CTL_READY_TO_RESET,
700);
if (ret)
DRM_ERROR("%s: reset request timeout\n", engine->name);
return ret;
}
static void gen8_unrequest_engine_reset(struct intel_engine_cs *engine)
{
struct drm_i915_private *dev_priv = engine->dev->dev_private;
I915_WRITE_FW(RING_RESET_CTL(engine->mmio_base),
_MASKED_BIT_DISABLE(RESET_CTL_REQUEST_RESET));
2015-06-18 17:51:40 +08:00
}
static int gen8_reset_engines(struct drm_device *dev, unsigned engine_mask)
2015-06-18 17:51:40 +08:00
{
struct drm_i915_private *dev_priv = dev->dev_private;
struct intel_engine_cs *engine;
for_each_engine_masked(engine, dev_priv, engine_mask)
if (gen8_request_engine_reset(engine))
2015-06-18 17:51:40 +08:00
goto not_ready;
return gen6_reset_engines(dev, engine_mask);
2015-06-18 17:51:40 +08:00
not_ready:
for_each_engine_masked(engine, dev_priv, engine_mask)
gen8_unrequest_engine_reset(engine);
2015-06-18 17:51:40 +08:00
return -EIO;
}
static int (*intel_get_gpu_reset(struct drm_device *dev))(struct drm_device *,
unsigned engine_mask)
{
if (!i915.reset)
return NULL;
2015-06-18 17:51:40 +08:00
if (INTEL_INFO(dev)->gen >= 8)
return gen8_reset_engines;
2015-06-18 17:51:40 +08:00
else if (INTEL_INFO(dev)->gen >= 6)
return gen6_reset_engines;
else if (IS_GEN5(dev))
return ironlake_do_reset;
else if (IS_G4X(dev))
return g4x_do_reset;
else if (IS_G33(dev))
return g33_do_reset;
else if (INTEL_INFO(dev)->gen >= 3)
return i915_do_reset;
else
return NULL;
}
int intel_gpu_reset(struct drm_device *dev, unsigned engine_mask)
{
struct drm_i915_private *dev_priv = to_i915(dev);
int (*reset)(struct drm_device *, unsigned);
int ret;
reset = intel_get_gpu_reset(dev);
if (reset == NULL)
return -ENODEV;
/* If the power well sleeps during the reset, the reset
* request may be dropped and never completes (causing -EIO).
*/
intel_uncore_forcewake_get(dev_priv, FORCEWAKE_ALL);
ret = reset(dev, engine_mask);
intel_uncore_forcewake_put(dev_priv, FORCEWAKE_ALL);
return ret;
}
bool intel_has_gpu_reset(struct drm_device *dev)
{
return intel_get_gpu_reset(dev) != NULL;
}
int intel_guc_reset(struct drm_i915_private *dev_priv)
{
int ret;
unsigned long irqflags;
if (!i915.enable_guc_submission)
return -EINVAL;
intel_uncore_forcewake_get(dev_priv, FORCEWAKE_ALL);
spin_lock_irqsave(&dev_priv->uncore.lock, irqflags);
ret = gen6_hw_domain_reset(dev_priv, GEN9_GRDOM_GUC);
spin_unlock_irqrestore(&dev_priv->uncore.lock, irqflags);
intel_uncore_forcewake_put(dev_priv, FORCEWAKE_ALL);
return ret;
}
bool intel_uncore_unclaimed_mmio(struct drm_i915_private *dev_priv)
{
return check_for_unclaimed_mmio(dev_priv);
}
bool
intel_uncore_arm_unclaimed_mmio_detection(struct drm_i915_private *dev_priv)
{
if (unlikely(i915.mmio_debug ||
dev_priv->uncore.unclaimed_mmio_check <= 0))
return false;
if (unlikely(intel_uncore_unclaimed_mmio(dev_priv))) {
DRM_DEBUG("Unclaimed register detected, "
"enabling oneshot unclaimed register reporting. "
"Please use i915.mmio_debug=N for more information.\n");
i915.mmio_debug++;
dev_priv->uncore.unclaimed_mmio_check--;
return true;
}
return false;
}
static enum forcewake_domains
intel_uncore_forcewake_for_read(struct drm_i915_private *dev_priv,
i915_reg_t reg)
{
enum forcewake_domains fw_domains;
if (intel_vgpu_active(dev_priv->dev))
return 0;
switch (INTEL_INFO(dev_priv)->gen) {
case 9:
fw_domains = __gen9_reg_read_fw_domains(i915_mmio_reg_offset(reg));
break;
case 8:
if (IS_CHERRYVIEW(dev_priv))
fw_domains = __chv_reg_read_fw_domains(i915_mmio_reg_offset(reg));
else
fw_domains = __gen6_reg_read_fw_domains(i915_mmio_reg_offset(reg));
break;
case 7:
case 6:
if (IS_VALLEYVIEW(dev_priv))
fw_domains = __vlv_reg_read_fw_domains(i915_mmio_reg_offset(reg));
else
fw_domains = __gen6_reg_read_fw_domains(i915_mmio_reg_offset(reg));
break;
default:
MISSING_CASE(INTEL_INFO(dev_priv)->gen);
case 5: /* forcewake was introduced with gen6 */
case 4:
case 3:
case 2:
return 0;
}
WARN_ON(fw_domains & ~dev_priv->uncore.fw_domains);
return fw_domains;
}
static enum forcewake_domains
intel_uncore_forcewake_for_write(struct drm_i915_private *dev_priv,
i915_reg_t reg)
{
enum forcewake_domains fw_domains;
if (intel_vgpu_active(dev_priv->dev))
return 0;
switch (INTEL_INFO(dev_priv)->gen) {
case 9:
fw_domains = __gen9_reg_write_fw_domains(i915_mmio_reg_offset(reg));
break;
case 8:
if (IS_CHERRYVIEW(dev_priv))
fw_domains = __chv_reg_write_fw_domains(i915_mmio_reg_offset(reg));
else
fw_domains = __gen8_reg_write_fw_domains(i915_mmio_reg_offset(reg));
break;
case 7:
case 6:
fw_domains = FORCEWAKE_RENDER;
break;
default:
MISSING_CASE(INTEL_INFO(dev_priv)->gen);
case 5:
case 4:
case 3:
case 2:
return 0;
}
WARN_ON(fw_domains & ~dev_priv->uncore.fw_domains);
return fw_domains;
}
/**
* intel_uncore_forcewake_for_reg - which forcewake domains are needed to access
* a register
* @dev_priv: pointer to struct drm_i915_private
* @reg: register in question
* @op: operation bitmask of FW_REG_READ and/or FW_REG_WRITE
*
* Returns a set of forcewake domains required to be taken with for example
* intel_uncore_forcewake_get for the specified register to be accessible in the
* specified mode (read, write or read/write) with raw mmio accessors.
*
* NOTE: On Gen6 and Gen7 write forcewake domain (FORCEWAKE_RENDER) requires the
* callers to do FIFO management on their own or risk losing writes.
*/
enum forcewake_domains
intel_uncore_forcewake_for_reg(struct drm_i915_private *dev_priv,
i915_reg_t reg, unsigned int op)
{
enum forcewake_domains fw_domains = 0;
WARN_ON(!op);
if (op & FW_REG_READ)
fw_domains = intel_uncore_forcewake_for_read(dev_priv, reg);
if (op & FW_REG_WRITE)
fw_domains |= intel_uncore_forcewake_for_write(dev_priv, reg);
return fw_domains;
}