OpenCloudOS-Kernel/drivers/watchdog/watchdog_dev.c

1231 lines
31 KiB
C
Raw Normal View History

// SPDX-License-Identifier: GPL-2.0+
/*
* watchdog_dev.c
*
* (c) Copyright 2008-2011 Alan Cox <alan@lxorguk.ukuu.org.uk>,
* All Rights Reserved.
*
* (c) Copyright 2008-2011 Wim Van Sebroeck <wim@iguana.be>.
*
*
* This source code is part of the generic code that can be used
* by all the watchdog timer drivers.
*
* This part of the generic code takes care of the following
* misc device: /dev/watchdog.
*
* Based on source code of the following authors:
* Matt Domsch <Matt_Domsch@dell.com>,
* Rob Radez <rob@osinvestor.com>,
* Rusty Lynch <rusty@linux.co.intel.com>
* Satyam Sharma <satyam@infradead.org>
* Randy Dunlap <randy.dunlap@oracle.com>
*
* Neither Alan Cox, CymruNet Ltd., Wim Van Sebroeck nor Iguana vzw.
* admit liability nor provide warranty for any of this software.
* This material is provided "AS-IS" and at no charge.
*/
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
watchdog: Separate and maintain variables based on variable lifetime All variables required by the watchdog core to manage a watchdog are currently stored in struct watchdog_device. The lifetime of those variables is determined by the watchdog driver. However, the lifetime of variables used by the watchdog core differs from the lifetime of struct watchdog_device. To remedy this situation, watchdog drivers can implement ref and unref callbacks, to be used by the watchdog core to lock struct watchdog_device in memory. While this solves the immediate problem, it depends on watchdog drivers to actually implement the ref/unref callbacks. This is error prone, often not implemented in the first place, or not implemented correctly. To solve the problem without requiring driver support, split the variables in struct watchdog_device into two data structures - one for variables associated with the watchdog driver, one for variables associated with the watchdog core. With this approach, the watchdog core can keep track of its variable lifetime and no longer depends on ref/unref callbacks in the driver. As a side effect, some of the variables originally in struct watchdog_driver are now private to the watchdog core and no longer visible in watchdog drivers. As a side effect of the changes made, an ioctl will now always fail with -ENODEV after a watchdog device was unregistered with the character device still open. Previously, it would only fail with -ENODEV in some situations. Also, ioctl operations are now atomic from driver perspective. With this change, it is now guaranteed that the driver will not unregister a watchdog between a timeout change and the subsequent ping. The 'ref' and 'unref' callbacks in struct watchdog_driver are no longer used and marked as deprecated. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-12-26 08:01:42 +08:00
#include <linux/cdev.h> /* For character device */
#include <linux/errno.h> /* For the -ENODEV/... values */
#include <linux/fs.h> /* For file operations */
#include <linux/init.h> /* For __init/__exit/... */
#include <linux/hrtimer.h> /* For hrtimers */
watchdog: Separate and maintain variables based on variable lifetime All variables required by the watchdog core to manage a watchdog are currently stored in struct watchdog_device. The lifetime of those variables is determined by the watchdog driver. However, the lifetime of variables used by the watchdog core differs from the lifetime of struct watchdog_device. To remedy this situation, watchdog drivers can implement ref and unref callbacks, to be used by the watchdog core to lock struct watchdog_device in memory. While this solves the immediate problem, it depends on watchdog drivers to actually implement the ref/unref callbacks. This is error prone, often not implemented in the first place, or not implemented correctly. To solve the problem without requiring driver support, split the variables in struct watchdog_device into two data structures - one for variables associated with the watchdog driver, one for variables associated with the watchdog core. With this approach, the watchdog core can keep track of its variable lifetime and no longer depends on ref/unref callbacks in the driver. As a side effect, some of the variables originally in struct watchdog_driver are now private to the watchdog core and no longer visible in watchdog drivers. As a side effect of the changes made, an ioctl will now always fail with -ENODEV after a watchdog device was unregistered with the character device still open. Previously, it would only fail with -ENODEV in some situations. Also, ioctl operations are now atomic from driver perspective. With this change, it is now guaranteed that the driver will not unregister a watchdog between a timeout change and the subsequent ping. The 'ref' and 'unref' callbacks in struct watchdog_driver are no longer used and marked as deprecated. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-12-26 08:01:42 +08:00
#include <linux/kernel.h> /* For printk/panic/... */
#include <linux/kthread.h> /* For kthread_work */
watchdog: Separate and maintain variables based on variable lifetime All variables required by the watchdog core to manage a watchdog are currently stored in struct watchdog_device. The lifetime of those variables is determined by the watchdog driver. However, the lifetime of variables used by the watchdog core differs from the lifetime of struct watchdog_device. To remedy this situation, watchdog drivers can implement ref and unref callbacks, to be used by the watchdog core to lock struct watchdog_device in memory. While this solves the immediate problem, it depends on watchdog drivers to actually implement the ref/unref callbacks. This is error prone, often not implemented in the first place, or not implemented correctly. To solve the problem without requiring driver support, split the variables in struct watchdog_device into two data structures - one for variables associated with the watchdog driver, one for variables associated with the watchdog core. With this approach, the watchdog core can keep track of its variable lifetime and no longer depends on ref/unref callbacks in the driver. As a side effect, some of the variables originally in struct watchdog_driver are now private to the watchdog core and no longer visible in watchdog drivers. As a side effect of the changes made, an ioctl will now always fail with -ENODEV after a watchdog device was unregistered with the character device still open. Previously, it would only fail with -ENODEV in some situations. Also, ioctl operations are now atomic from driver perspective. With this change, it is now guaranteed that the driver will not unregister a watchdog between a timeout change and the subsequent ping. The 'ref' and 'unref' callbacks in struct watchdog_driver are no longer used and marked as deprecated. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-12-26 08:01:42 +08:00
#include <linux/miscdevice.h> /* For handling misc devices */
#include <linux/module.h> /* For module stuff/... */
#include <linux/mutex.h> /* For mutexes */
#include <linux/slab.h> /* For memory functions */
#include <linux/types.h> /* For standard types (like size_t) */
#include <linux/watchdog.h> /* For watchdog specific items */
#include <linux/uaccess.h> /* For copy_to_user/put_user/... */
#include <uapi/linux/sched/types.h> /* For struct sched_param */
#include "watchdog_core.h"
#include "watchdog_pretimeout.h"
watchdog: Separate and maintain variables based on variable lifetime All variables required by the watchdog core to manage a watchdog are currently stored in struct watchdog_device. The lifetime of those variables is determined by the watchdog driver. However, the lifetime of variables used by the watchdog core differs from the lifetime of struct watchdog_device. To remedy this situation, watchdog drivers can implement ref and unref callbacks, to be used by the watchdog core to lock struct watchdog_device in memory. While this solves the immediate problem, it depends on watchdog drivers to actually implement the ref/unref callbacks. This is error prone, often not implemented in the first place, or not implemented correctly. To solve the problem without requiring driver support, split the variables in struct watchdog_device into two data structures - one for variables associated with the watchdog driver, one for variables associated with the watchdog core. With this approach, the watchdog core can keep track of its variable lifetime and no longer depends on ref/unref callbacks in the driver. As a side effect, some of the variables originally in struct watchdog_driver are now private to the watchdog core and no longer visible in watchdog drivers. As a side effect of the changes made, an ioctl will now always fail with -ENODEV after a watchdog device was unregistered with the character device still open. Previously, it would only fail with -ENODEV in some situations. Also, ioctl operations are now atomic from driver perspective. With this change, it is now guaranteed that the driver will not unregister a watchdog between a timeout change and the subsequent ping. The 'ref' and 'unref' callbacks in struct watchdog_driver are no longer used and marked as deprecated. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-12-26 08:01:42 +08:00
/*
* struct watchdog_core_data - watchdog core internal data
watchdog: Fix the race between the release of watchdog_core_data and cdev The struct cdev is embedded in the struct watchdog_core_data. In the current code, we manage the watchdog_core_data with a kref, but the cdev is manged by a kobject. There is no any relationship between this kref and kobject. So it is possible that the watchdog_core_data is freed before the cdev is entirely released. We can easily get the following call trace with CONFIG_DEBUG_KOBJECT_RELEASE and CONFIG_DEBUG_OBJECTS_TIMERS enabled. ODEBUG: free active (active state 0) object type: timer_list hint: delayed_work_timer_fn+0x0/0x38 WARNING: CPU: 23 PID: 1028 at lib/debugobjects.c:481 debug_print_object+0xb0/0xf0 Modules linked in: softdog(-) deflate ctr twofish_generic twofish_common camellia_generic serpent_generic blowfish_generic blowfish_common cast5_generic cast_common cmac xcbc af_key sch_fq_codel openvswitch nsh nf_conncount nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 CPU: 23 PID: 1028 Comm: modprobe Not tainted 5.3.0-next-20190924-yoctodev-standard+ #180 Hardware name: Marvell OcteonTX CN96XX board (DT) pstate: 00400009 (nzcv daif +PAN -UAO) pc : debug_print_object+0xb0/0xf0 lr : debug_print_object+0xb0/0xf0 sp : ffff80001cbcfc70 x29: ffff80001cbcfc70 x28: ffff800010ea2128 x27: ffff800010bad000 x26: 0000000000000000 x25: ffff80001103c640 x24: ffff80001107b268 x23: ffff800010bad9e8 x22: ffff800010ea2128 x21: ffff000bc2c62af8 x20: ffff80001103c600 x19: ffff800010e867d8 x18: 0000000000000060 x17: 0000000000000000 x16: 0000000000000000 x15: ffff000bd7240470 x14: 6e6968207473696c x13: 5f72656d6974203a x12: 6570797420746365 x11: 6a626f2029302065 x10: 7461747320657669 x9 : 7463612820657669 x8 : 3378302f3078302b x7 : 0000000000001d7a x6 : ffff800010fd5889 x5 : 0000000000000000 x4 : 0000000000000000 x3 : 0000000000000000 x2 : ffff000bff948548 x1 : 276a1c9e1edc2300 x0 : 0000000000000000 Call trace: debug_print_object+0xb0/0xf0 debug_check_no_obj_freed+0x1e8/0x210 kfree+0x1b8/0x368 watchdog_cdev_unregister+0x88/0xc8 watchdog_dev_unregister+0x38/0x48 watchdog_unregister_device+0xa8/0x100 softdog_exit+0x18/0xfec4 [softdog] __arm64_sys_delete_module+0x174/0x200 el0_svc_handler+0xd0/0x1c8 el0_svc+0x8/0xc This is a common issue when using cdev embedded in a struct. Fortunately, we already have a mechanism to solve this kind of issue. Please see commit 233ed09d7fda ("chardev: add helper function to register char devs with a struct device") for more detail. In this patch, we choose to embed the struct device into the watchdog_core_data, and use the API provided by the commit 233ed09d7fda to make sure that the release of watchdog_core_data and cdev are in sequence. Signed-off-by: Kevin Hao <haokexin@gmail.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20191008112934.29669-1-haokexin@gmail.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-10-08 19:29:34 +08:00
* @dev: The watchdog's internal device
watchdog: Separate and maintain variables based on variable lifetime All variables required by the watchdog core to manage a watchdog are currently stored in struct watchdog_device. The lifetime of those variables is determined by the watchdog driver. However, the lifetime of variables used by the watchdog core differs from the lifetime of struct watchdog_device. To remedy this situation, watchdog drivers can implement ref and unref callbacks, to be used by the watchdog core to lock struct watchdog_device in memory. While this solves the immediate problem, it depends on watchdog drivers to actually implement the ref/unref callbacks. This is error prone, often not implemented in the first place, or not implemented correctly. To solve the problem without requiring driver support, split the variables in struct watchdog_device into two data structures - one for variables associated with the watchdog driver, one for variables associated with the watchdog core. With this approach, the watchdog core can keep track of its variable lifetime and no longer depends on ref/unref callbacks in the driver. As a side effect, some of the variables originally in struct watchdog_driver are now private to the watchdog core and no longer visible in watchdog drivers. As a side effect of the changes made, an ioctl will now always fail with -ENODEV after a watchdog device was unregistered with the character device still open. Previously, it would only fail with -ENODEV in some situations. Also, ioctl operations are now atomic from driver perspective. With this change, it is now guaranteed that the driver will not unregister a watchdog between a timeout change and the subsequent ping. The 'ref' and 'unref' callbacks in struct watchdog_driver are no longer used and marked as deprecated. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-12-26 08:01:42 +08:00
* @cdev: The watchdog's Character device.
* @wdd: Pointer to watchdog device.
* @lock: Lock for watchdog core.
* @status: Watchdog core internal status bits.
*/
struct watchdog_core_data {
watchdog: Fix the race between the release of watchdog_core_data and cdev The struct cdev is embedded in the struct watchdog_core_data. In the current code, we manage the watchdog_core_data with a kref, but the cdev is manged by a kobject. There is no any relationship between this kref and kobject. So it is possible that the watchdog_core_data is freed before the cdev is entirely released. We can easily get the following call trace with CONFIG_DEBUG_KOBJECT_RELEASE and CONFIG_DEBUG_OBJECTS_TIMERS enabled. ODEBUG: free active (active state 0) object type: timer_list hint: delayed_work_timer_fn+0x0/0x38 WARNING: CPU: 23 PID: 1028 at lib/debugobjects.c:481 debug_print_object+0xb0/0xf0 Modules linked in: softdog(-) deflate ctr twofish_generic twofish_common camellia_generic serpent_generic blowfish_generic blowfish_common cast5_generic cast_common cmac xcbc af_key sch_fq_codel openvswitch nsh nf_conncount nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 CPU: 23 PID: 1028 Comm: modprobe Not tainted 5.3.0-next-20190924-yoctodev-standard+ #180 Hardware name: Marvell OcteonTX CN96XX board (DT) pstate: 00400009 (nzcv daif +PAN -UAO) pc : debug_print_object+0xb0/0xf0 lr : debug_print_object+0xb0/0xf0 sp : ffff80001cbcfc70 x29: ffff80001cbcfc70 x28: ffff800010ea2128 x27: ffff800010bad000 x26: 0000000000000000 x25: ffff80001103c640 x24: ffff80001107b268 x23: ffff800010bad9e8 x22: ffff800010ea2128 x21: ffff000bc2c62af8 x20: ffff80001103c600 x19: ffff800010e867d8 x18: 0000000000000060 x17: 0000000000000000 x16: 0000000000000000 x15: ffff000bd7240470 x14: 6e6968207473696c x13: 5f72656d6974203a x12: 6570797420746365 x11: 6a626f2029302065 x10: 7461747320657669 x9 : 7463612820657669 x8 : 3378302f3078302b x7 : 0000000000001d7a x6 : ffff800010fd5889 x5 : 0000000000000000 x4 : 0000000000000000 x3 : 0000000000000000 x2 : ffff000bff948548 x1 : 276a1c9e1edc2300 x0 : 0000000000000000 Call trace: debug_print_object+0xb0/0xf0 debug_check_no_obj_freed+0x1e8/0x210 kfree+0x1b8/0x368 watchdog_cdev_unregister+0x88/0xc8 watchdog_dev_unregister+0x38/0x48 watchdog_unregister_device+0xa8/0x100 softdog_exit+0x18/0xfec4 [softdog] __arm64_sys_delete_module+0x174/0x200 el0_svc_handler+0xd0/0x1c8 el0_svc+0x8/0xc This is a common issue when using cdev embedded in a struct. Fortunately, we already have a mechanism to solve this kind of issue. Please see commit 233ed09d7fda ("chardev: add helper function to register char devs with a struct device") for more detail. In this patch, we choose to embed the struct device into the watchdog_core_data, and use the API provided by the commit 233ed09d7fda to make sure that the release of watchdog_core_data and cdev are in sequence. Signed-off-by: Kevin Hao <haokexin@gmail.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20191008112934.29669-1-haokexin@gmail.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-10-08 19:29:34 +08:00
struct device dev;
watchdog: Separate and maintain variables based on variable lifetime All variables required by the watchdog core to manage a watchdog are currently stored in struct watchdog_device. The lifetime of those variables is determined by the watchdog driver. However, the lifetime of variables used by the watchdog core differs from the lifetime of struct watchdog_device. To remedy this situation, watchdog drivers can implement ref and unref callbacks, to be used by the watchdog core to lock struct watchdog_device in memory. While this solves the immediate problem, it depends on watchdog drivers to actually implement the ref/unref callbacks. This is error prone, often not implemented in the first place, or not implemented correctly. To solve the problem without requiring driver support, split the variables in struct watchdog_device into two data structures - one for variables associated with the watchdog driver, one for variables associated with the watchdog core. With this approach, the watchdog core can keep track of its variable lifetime and no longer depends on ref/unref callbacks in the driver. As a side effect, some of the variables originally in struct watchdog_driver are now private to the watchdog core and no longer visible in watchdog drivers. As a side effect of the changes made, an ioctl will now always fail with -ENODEV after a watchdog device was unregistered with the character device still open. Previously, it would only fail with -ENODEV in some situations. Also, ioctl operations are now atomic from driver perspective. With this change, it is now guaranteed that the driver will not unregister a watchdog between a timeout change and the subsequent ping. The 'ref' and 'unref' callbacks in struct watchdog_driver are no longer used and marked as deprecated. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-12-26 08:01:42 +08:00
struct cdev cdev;
struct watchdog_device *wdd;
struct mutex lock;
ktime_t last_keepalive;
ktime_t last_hw_keepalive;
watchdog: introduce watchdog.open_timeout commandline parameter The watchdog framework takes care of feeding a hardware watchdog until userspace opens /dev/watchdogN. If that never happens for some reason (buggy init script, corrupt root filesystem or whatnot) but the kernel itself is fine, the machine stays up indefinitely. This patch allows setting an upper limit for how long the kernel will take care of the watchdog, thus ensuring that the watchdog will eventually reset the machine. A value of 0 (the default) means infinite timeout, preserving the current behaviour. This is particularly useful for embedded devices where some fallback logic is implemented in the bootloader (e.g., use a different root partition, boot from network, ...). There is already handle_boot_enabled serving a similar purpose. However, such a binary choice is unsuitable if the hardware watchdog cannot be programmed by the bootloader to provide a timeout long enough for userspace to get up and running. Many of the embedded devices we see use external (gpio-triggered) watchdogs with a fixed timeout of the order of 1-2 seconds. The open timeout only applies for the first open from userspace. Should userspace need to close the watchdog device, with the intention of re-opening it shortly, the application can emulate the open timeout feature by combining the nowayout feature with an appropriate WDIOC_SETTIMEOUT immediately prior to closing the device. Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-06-05 22:06:41 +08:00
ktime_t open_deadline;
struct hrtimer timer;
struct kthread_work work;
watchdog: Separate and maintain variables based on variable lifetime All variables required by the watchdog core to manage a watchdog are currently stored in struct watchdog_device. The lifetime of those variables is determined by the watchdog driver. However, the lifetime of variables used by the watchdog core differs from the lifetime of struct watchdog_device. To remedy this situation, watchdog drivers can implement ref and unref callbacks, to be used by the watchdog core to lock struct watchdog_device in memory. While this solves the immediate problem, it depends on watchdog drivers to actually implement the ref/unref callbacks. This is error prone, often not implemented in the first place, or not implemented correctly. To solve the problem without requiring driver support, split the variables in struct watchdog_device into two data structures - one for variables associated with the watchdog driver, one for variables associated with the watchdog core. With this approach, the watchdog core can keep track of its variable lifetime and no longer depends on ref/unref callbacks in the driver. As a side effect, some of the variables originally in struct watchdog_driver are now private to the watchdog core and no longer visible in watchdog drivers. As a side effect of the changes made, an ioctl will now always fail with -ENODEV after a watchdog device was unregistered with the character device still open. Previously, it would only fail with -ENODEV in some situations. Also, ioctl operations are now atomic from driver perspective. With this change, it is now guaranteed that the driver will not unregister a watchdog between a timeout change and the subsequent ping. The 'ref' and 'unref' callbacks in struct watchdog_driver are no longer used and marked as deprecated. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-12-26 08:01:42 +08:00
unsigned long status; /* Internal status bits */
#define _WDOG_DEV_OPEN 0 /* Opened ? */
#define _WDOG_ALLOW_RELEASE 1 /* Did we receive the magic char ? */
#define _WDOG_KEEPALIVE 2 /* Did we receive a keepalive ? */
watchdog: Separate and maintain variables based on variable lifetime All variables required by the watchdog core to manage a watchdog are currently stored in struct watchdog_device. The lifetime of those variables is determined by the watchdog driver. However, the lifetime of variables used by the watchdog core differs from the lifetime of struct watchdog_device. To remedy this situation, watchdog drivers can implement ref and unref callbacks, to be used by the watchdog core to lock struct watchdog_device in memory. While this solves the immediate problem, it depends on watchdog drivers to actually implement the ref/unref callbacks. This is error prone, often not implemented in the first place, or not implemented correctly. To solve the problem without requiring driver support, split the variables in struct watchdog_device into two data structures - one for variables associated with the watchdog driver, one for variables associated with the watchdog core. With this approach, the watchdog core can keep track of its variable lifetime and no longer depends on ref/unref callbacks in the driver. As a side effect, some of the variables originally in struct watchdog_driver are now private to the watchdog core and no longer visible in watchdog drivers. As a side effect of the changes made, an ioctl will now always fail with -ENODEV after a watchdog device was unregistered with the character device still open. Previously, it would only fail with -ENODEV in some situations. Also, ioctl operations are now atomic from driver perspective. With this change, it is now guaranteed that the driver will not unregister a watchdog between a timeout change and the subsequent ping. The 'ref' and 'unref' callbacks in struct watchdog_driver are no longer used and marked as deprecated. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-12-26 08:01:42 +08:00
};
/* the dev_t structure to store the dynamically allocated watchdog devices */
static dev_t watchdog_devt;
watchdog: Separate and maintain variables based on variable lifetime All variables required by the watchdog core to manage a watchdog are currently stored in struct watchdog_device. The lifetime of those variables is determined by the watchdog driver. However, the lifetime of variables used by the watchdog core differs from the lifetime of struct watchdog_device. To remedy this situation, watchdog drivers can implement ref and unref callbacks, to be used by the watchdog core to lock struct watchdog_device in memory. While this solves the immediate problem, it depends on watchdog drivers to actually implement the ref/unref callbacks. This is error prone, often not implemented in the first place, or not implemented correctly. To solve the problem without requiring driver support, split the variables in struct watchdog_device into two data structures - one for variables associated with the watchdog driver, one for variables associated with the watchdog core. With this approach, the watchdog core can keep track of its variable lifetime and no longer depends on ref/unref callbacks in the driver. As a side effect, some of the variables originally in struct watchdog_driver are now private to the watchdog core and no longer visible in watchdog drivers. As a side effect of the changes made, an ioctl will now always fail with -ENODEV after a watchdog device was unregistered with the character device still open. Previously, it would only fail with -ENODEV in some situations. Also, ioctl operations are now atomic from driver perspective. With this change, it is now guaranteed that the driver will not unregister a watchdog between a timeout change and the subsequent ping. The 'ref' and 'unref' callbacks in struct watchdog_driver are no longer used and marked as deprecated. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-12-26 08:01:42 +08:00
/* Reference to watchdog device behind /dev/watchdog */
static struct watchdog_core_data *old_wd_data;
static struct kthread_worker *watchdog_kworker;
static bool handle_boot_enabled =
IS_ENABLED(CONFIG_WATCHDOG_HANDLE_BOOT_ENABLED);
static unsigned open_timeout = CONFIG_WATCHDOG_OPEN_TIMEOUT;
watchdog: introduce watchdog.open_timeout commandline parameter The watchdog framework takes care of feeding a hardware watchdog until userspace opens /dev/watchdogN. If that never happens for some reason (buggy init script, corrupt root filesystem or whatnot) but the kernel itself is fine, the machine stays up indefinitely. This patch allows setting an upper limit for how long the kernel will take care of the watchdog, thus ensuring that the watchdog will eventually reset the machine. A value of 0 (the default) means infinite timeout, preserving the current behaviour. This is particularly useful for embedded devices where some fallback logic is implemented in the bootloader (e.g., use a different root partition, boot from network, ...). There is already handle_boot_enabled serving a similar purpose. However, such a binary choice is unsuitable if the hardware watchdog cannot be programmed by the bootloader to provide a timeout long enough for userspace to get up and running. Many of the embedded devices we see use external (gpio-triggered) watchdogs with a fixed timeout of the order of 1-2 seconds. The open timeout only applies for the first open from userspace. Should userspace need to close the watchdog device, with the intention of re-opening it shortly, the application can emulate the open timeout feature by combining the nowayout feature with an appropriate WDIOC_SETTIMEOUT immediately prior to closing the device. Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-06-05 22:06:41 +08:00
static bool watchdog_past_open_deadline(struct watchdog_core_data *data)
{
return ktime_after(ktime_get(), data->open_deadline);
}
static void watchdog_set_open_deadline(struct watchdog_core_data *data)
{
data->open_deadline = open_timeout ?
ktime_get() + ktime_set(open_timeout, 0) : KTIME_MAX;
}
static inline bool watchdog_need_worker(struct watchdog_device *wdd)
{
/* All variables in milli-seconds */
unsigned int hm = wdd->max_hw_heartbeat_ms;
unsigned int t = wdd->timeout * 1000;
/*
* A worker to generate heartbeat requests is needed if all of the
* following conditions are true.
* - Userspace activated the watchdog.
* - The driver provided a value for the maximum hardware timeout, and
* thus is aware that the framework supports generating heartbeat
* requests.
* - Userspace requests a longer timeout than the hardware can handle.
watchdog: change watchdog_need_worker logic If the driver indicates that the watchdog is running, the framework should feed it until userspace opens the device, regardless of whether the driver has set max_hw_heartbeat_ms. This patch only affects the case where wdd->max_hw_heartbeat_ms is zero, wdd->timeout is non-zero, the watchdog is not active and the hardware device is running (*): - If wdd->timeout is zero, watchdog_need_worker() returns false both before and after this patch, and watchdog_next_keepalive() is not called. - If watchdog_active(wdd), the return value from watchdog_need_worker is also the same as before (namely, hm && t > hm). Hence in that case, watchdog_next_keepalive() is only called if hm == max_hw_heartbeat_ms is non-zero, so the change to min_not_zero there is a no-op. - If the watchdog is not active and the device is not running, we return false from watchdog_need_worker just as before. That leaves the watchdog_hw_running(wdd) && !watchdog_active(wdd) && wdd->timeout case. Again, it's easy to see that if wdd->max_hw_heartbeat_ms is non-zero, we return true from watchdog_need_worker with and without this patch, and the logic in watchdog_next_keepalive is unchanged. Finally, if wdd->max_hw_heartbeat_ms is 0, we used to end up in the cancel_delayed_work branch, whereas with this patch we end up scheduling a ping timeout_ms/2 from now. (*) This should imply that no current kernel drivers are affected, since the only drivers which explicitly set WDOG_HW_RUNNING are imx2_wdt.c and dw_wdt.c, both of which also provide a non-zero value for max_hw_heartbeat_ms. The watchdog core also sets WDOG_HW_RUNNING, but only when the driver doesn't provide ->stop, in which case it must, according to Documentation/watchdog/watchdog-kernel-api.txt, set max_hw_heartbeat_ms. Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2016-07-14 17:16:26 +08:00
*
* Alternatively, if userspace has not opened the watchdog
* device, we take care of feeding the watchdog if it is
* running.
*/
watchdog: change watchdog_need_worker logic If the driver indicates that the watchdog is running, the framework should feed it until userspace opens the device, regardless of whether the driver has set max_hw_heartbeat_ms. This patch only affects the case where wdd->max_hw_heartbeat_ms is zero, wdd->timeout is non-zero, the watchdog is not active and the hardware device is running (*): - If wdd->timeout is zero, watchdog_need_worker() returns false both before and after this patch, and watchdog_next_keepalive() is not called. - If watchdog_active(wdd), the return value from watchdog_need_worker is also the same as before (namely, hm && t > hm). Hence in that case, watchdog_next_keepalive() is only called if hm == max_hw_heartbeat_ms is non-zero, so the change to min_not_zero there is a no-op. - If the watchdog is not active and the device is not running, we return false from watchdog_need_worker just as before. That leaves the watchdog_hw_running(wdd) && !watchdog_active(wdd) && wdd->timeout case. Again, it's easy to see that if wdd->max_hw_heartbeat_ms is non-zero, we return true from watchdog_need_worker with and without this patch, and the logic in watchdog_next_keepalive is unchanged. Finally, if wdd->max_hw_heartbeat_ms is 0, we used to end up in the cancel_delayed_work branch, whereas with this patch we end up scheduling a ping timeout_ms/2 from now. (*) This should imply that no current kernel drivers are affected, since the only drivers which explicitly set WDOG_HW_RUNNING are imx2_wdt.c and dw_wdt.c, both of which also provide a non-zero value for max_hw_heartbeat_ms. The watchdog core also sets WDOG_HW_RUNNING, but only when the driver doesn't provide ->stop, in which case it must, according to Documentation/watchdog/watchdog-kernel-api.txt, set max_hw_heartbeat_ms. Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2016-07-14 17:16:26 +08:00
return (hm && watchdog_active(wdd) && t > hm) ||
(t && !watchdog_active(wdd) && watchdog_hw_running(wdd));
}
static ktime_t watchdog_next_keepalive(struct watchdog_device *wdd)
{
struct watchdog_core_data *wd_data = wdd->wd_data;
unsigned int timeout_ms = wdd->timeout * 1000;
ktime_t keepalive_interval;
ktime_t last_heartbeat, latest_heartbeat;
ktime_t virt_timeout;
unsigned int hw_heartbeat_ms;
if (watchdog_active(wdd))
virt_timeout = ktime_add(wd_data->last_keepalive,
ms_to_ktime(timeout_ms));
else
virt_timeout = wd_data->open_deadline;
watchdog: change watchdog_need_worker logic If the driver indicates that the watchdog is running, the framework should feed it until userspace opens the device, regardless of whether the driver has set max_hw_heartbeat_ms. This patch only affects the case where wdd->max_hw_heartbeat_ms is zero, wdd->timeout is non-zero, the watchdog is not active and the hardware device is running (*): - If wdd->timeout is zero, watchdog_need_worker() returns false both before and after this patch, and watchdog_next_keepalive() is not called. - If watchdog_active(wdd), the return value from watchdog_need_worker is also the same as before (namely, hm && t > hm). Hence in that case, watchdog_next_keepalive() is only called if hm == max_hw_heartbeat_ms is non-zero, so the change to min_not_zero there is a no-op. - If the watchdog is not active and the device is not running, we return false from watchdog_need_worker just as before. That leaves the watchdog_hw_running(wdd) && !watchdog_active(wdd) && wdd->timeout case. Again, it's easy to see that if wdd->max_hw_heartbeat_ms is non-zero, we return true from watchdog_need_worker with and without this patch, and the logic in watchdog_next_keepalive is unchanged. Finally, if wdd->max_hw_heartbeat_ms is 0, we used to end up in the cancel_delayed_work branch, whereas with this patch we end up scheduling a ping timeout_ms/2 from now. (*) This should imply that no current kernel drivers are affected, since the only drivers which explicitly set WDOG_HW_RUNNING are imx2_wdt.c and dw_wdt.c, both of which also provide a non-zero value for max_hw_heartbeat_ms. The watchdog core also sets WDOG_HW_RUNNING, but only when the driver doesn't provide ->stop, in which case it must, according to Documentation/watchdog/watchdog-kernel-api.txt, set max_hw_heartbeat_ms. Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2016-07-14 17:16:26 +08:00
hw_heartbeat_ms = min_not_zero(timeout_ms, wdd->max_hw_heartbeat_ms);
keepalive_interval = ms_to_ktime(hw_heartbeat_ms / 2);
/*
* To ensure that the watchdog times out wdd->timeout seconds
* after the most recent ping from userspace, the last
* worker ping has to come in hw_heartbeat_ms before this timeout.
*/
last_heartbeat = ktime_sub(virt_timeout, ms_to_ktime(hw_heartbeat_ms));
latest_heartbeat = ktime_sub(last_heartbeat, ktime_get());
if (ktime_before(latest_heartbeat, keepalive_interval))
return latest_heartbeat;
return keepalive_interval;
}
static inline void watchdog_update_worker(struct watchdog_device *wdd)
{
struct watchdog_core_data *wd_data = wdd->wd_data;
if (watchdog_need_worker(wdd)) {
ktime_t t = watchdog_next_keepalive(wdd);
if (t > 0)
watchdog: prevent deferral of watchdogd wakeup on RT When PREEMPT_RT is enabled, all hrtimer expiry functions are deferred for execution into the context of ksoftirqd unless otherwise annotated. Deferring the expiry of the hrtimer used by the watchdog core, however, is a waste, as the callback does nothing but queue a kthread work item and wakeup watchdogd. It's worst then that, too: the deferral through ksoftirqd also means that for correct behavior a user must adjust the scheduling parameters of both watchdogd _and_ ksoftirqd, which is unnecessary and has other side effects (like causing unrelated expiry functions to execute at potentially elevated priority). Instead, mark the hrtimer used by the watchdog core as being _HARD to allow it's execution directly from hardirq context. The work done in this expiry function is well-bounded and minimal. A user still must adjust the scheduling parameters of the watchdogd to be correct w.r.t. their application needs. Link: https://lkml.kernel.org/r/0e02d8327aeca344096c246713033887bc490dd7.1538089180.git.julia@ni.com Cc: Guenter Roeck <linux@roeck-us.net> Reported-and-tested-by: Steffen Trumtrar <s.trumtrar@pengutronix.de> Reported-by: Tim Sander <tim@krieglstein.org> Signed-off-by: Julia Cartwright <julia@ni.com> Acked-by: Guenter Roeck <linux@roeck-us.net> [bigeasy: use only HRTIMER_MODE_REL_HARD] Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20191105144506.clyadjbvnn7b7b2m@linutronix.de Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-11-05 22:45:06 +08:00
hrtimer_start(&wd_data->timer, t,
HRTIMER_MODE_REL_HARD);
} else {
hrtimer_cancel(&wd_data->timer);
}
}
static int __watchdog_ping(struct watchdog_device *wdd)
{
struct watchdog_core_data *wd_data = wdd->wd_data;
ktime_t earliest_keepalive, now;
int err;
earliest_keepalive = ktime_add(wd_data->last_hw_keepalive,
ms_to_ktime(wdd->min_hw_heartbeat_ms));
now = ktime_get();
if (ktime_after(earliest_keepalive, now)) {
hrtimer_start(&wd_data->timer,
ktime_sub(earliest_keepalive, now),
watchdog: prevent deferral of watchdogd wakeup on RT When PREEMPT_RT is enabled, all hrtimer expiry functions are deferred for execution into the context of ksoftirqd unless otherwise annotated. Deferring the expiry of the hrtimer used by the watchdog core, however, is a waste, as the callback does nothing but queue a kthread work item and wakeup watchdogd. It's worst then that, too: the deferral through ksoftirqd also means that for correct behavior a user must adjust the scheduling parameters of both watchdogd _and_ ksoftirqd, which is unnecessary and has other side effects (like causing unrelated expiry functions to execute at potentially elevated priority). Instead, mark the hrtimer used by the watchdog core as being _HARD to allow it's execution directly from hardirq context. The work done in this expiry function is well-bounded and minimal. A user still must adjust the scheduling parameters of the watchdogd to be correct w.r.t. their application needs. Link: https://lkml.kernel.org/r/0e02d8327aeca344096c246713033887bc490dd7.1538089180.git.julia@ni.com Cc: Guenter Roeck <linux@roeck-us.net> Reported-and-tested-by: Steffen Trumtrar <s.trumtrar@pengutronix.de> Reported-by: Tim Sander <tim@krieglstein.org> Signed-off-by: Julia Cartwright <julia@ni.com> Acked-by: Guenter Roeck <linux@roeck-us.net> [bigeasy: use only HRTIMER_MODE_REL_HARD] Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20191105144506.clyadjbvnn7b7b2m@linutronix.de Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-11-05 22:45:06 +08:00
HRTIMER_MODE_REL_HARD);
return 0;
}
wd_data->last_hw_keepalive = now;
if (wdd->ops->ping)
err = wdd->ops->ping(wdd); /* ping the watchdog */
else
err = wdd->ops->start(wdd); /* restart watchdog */
watchdog_update_worker(wdd);
return err;
}
/*
* watchdog_ping: ping the watchdog.
* @wdd: the watchdog device to ping
*
watchdog: Separate and maintain variables based on variable lifetime All variables required by the watchdog core to manage a watchdog are currently stored in struct watchdog_device. The lifetime of those variables is determined by the watchdog driver. However, the lifetime of variables used by the watchdog core differs from the lifetime of struct watchdog_device. To remedy this situation, watchdog drivers can implement ref and unref callbacks, to be used by the watchdog core to lock struct watchdog_device in memory. While this solves the immediate problem, it depends on watchdog drivers to actually implement the ref/unref callbacks. This is error prone, often not implemented in the first place, or not implemented correctly. To solve the problem without requiring driver support, split the variables in struct watchdog_device into two data structures - one for variables associated with the watchdog driver, one for variables associated with the watchdog core. With this approach, the watchdog core can keep track of its variable lifetime and no longer depends on ref/unref callbacks in the driver. As a side effect, some of the variables originally in struct watchdog_driver are now private to the watchdog core and no longer visible in watchdog drivers. As a side effect of the changes made, an ioctl will now always fail with -ENODEV after a watchdog device was unregistered with the character device still open. Previously, it would only fail with -ENODEV in some situations. Also, ioctl operations are now atomic from driver perspective. With this change, it is now guaranteed that the driver will not unregister a watchdog between a timeout change and the subsequent ping. The 'ref' and 'unref' callbacks in struct watchdog_driver are no longer used and marked as deprecated. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-12-26 08:01:42 +08:00
* The caller must hold wd_data->lock.
*
* If the watchdog has no own ping operation then it needs to be
* restarted via the start operation. This wrapper function does
* exactly that.
* We only ping when the watchdog device is running.
*/
static int watchdog_ping(struct watchdog_device *wdd)
{
struct watchdog_core_data *wd_data = wdd->wd_data;
if (!watchdog_active(wdd) && !watchdog_hw_running(wdd))
watchdog: Separate and maintain variables based on variable lifetime All variables required by the watchdog core to manage a watchdog are currently stored in struct watchdog_device. The lifetime of those variables is determined by the watchdog driver. However, the lifetime of variables used by the watchdog core differs from the lifetime of struct watchdog_device. To remedy this situation, watchdog drivers can implement ref and unref callbacks, to be used by the watchdog core to lock struct watchdog_device in memory. While this solves the immediate problem, it depends on watchdog drivers to actually implement the ref/unref callbacks. This is error prone, often not implemented in the first place, or not implemented correctly. To solve the problem without requiring driver support, split the variables in struct watchdog_device into two data structures - one for variables associated with the watchdog driver, one for variables associated with the watchdog core. With this approach, the watchdog core can keep track of its variable lifetime and no longer depends on ref/unref callbacks in the driver. As a side effect, some of the variables originally in struct watchdog_driver are now private to the watchdog core and no longer visible in watchdog drivers. As a side effect of the changes made, an ioctl will now always fail with -ENODEV after a watchdog device was unregistered with the character device still open. Previously, it would only fail with -ENODEV in some situations. Also, ioctl operations are now atomic from driver perspective. With this change, it is now guaranteed that the driver will not unregister a watchdog between a timeout change and the subsequent ping. The 'ref' and 'unref' callbacks in struct watchdog_driver are no longer used and marked as deprecated. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-12-26 08:01:42 +08:00
return 0;
set_bit(_WDOG_KEEPALIVE, &wd_data->status);
wd_data->last_keepalive = ktime_get();
return __watchdog_ping(wdd);
}
static bool watchdog_worker_should_ping(struct watchdog_core_data *wd_data)
{
struct watchdog_device *wdd = wd_data->wdd;
watchdog: introduce watchdog.open_timeout commandline parameter The watchdog framework takes care of feeding a hardware watchdog until userspace opens /dev/watchdogN. If that never happens for some reason (buggy init script, corrupt root filesystem or whatnot) but the kernel itself is fine, the machine stays up indefinitely. This patch allows setting an upper limit for how long the kernel will take care of the watchdog, thus ensuring that the watchdog will eventually reset the machine. A value of 0 (the default) means infinite timeout, preserving the current behaviour. This is particularly useful for embedded devices where some fallback logic is implemented in the bootloader (e.g., use a different root partition, boot from network, ...). There is already handle_boot_enabled serving a similar purpose. However, such a binary choice is unsuitable if the hardware watchdog cannot be programmed by the bootloader to provide a timeout long enough for userspace to get up and running. Many of the embedded devices we see use external (gpio-triggered) watchdogs with a fixed timeout of the order of 1-2 seconds. The open timeout only applies for the first open from userspace. Should userspace need to close the watchdog device, with the intention of re-opening it shortly, the application can emulate the open timeout feature by combining the nowayout feature with an appropriate WDIOC_SETTIMEOUT immediately prior to closing the device. Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-06-05 22:06:41 +08:00
if (!wdd)
return false;
if (watchdog_active(wdd))
return true;
return watchdog_hw_running(wdd) && !watchdog_past_open_deadline(wd_data);
}
static void watchdog_ping_work(struct kthread_work *work)
{
struct watchdog_core_data *wd_data;
wd_data = container_of(work, struct watchdog_core_data, work);
mutex_lock(&wd_data->lock);
if (watchdog_worker_should_ping(wd_data))
__watchdog_ping(wd_data->wdd);
mutex_unlock(&wd_data->lock);
}
static enum hrtimer_restart watchdog_timer_expired(struct hrtimer *timer)
{
struct watchdog_core_data *wd_data;
wd_data = container_of(timer, struct watchdog_core_data, timer);
kthread_queue_work(watchdog_kworker, &wd_data->work);
return HRTIMER_NORESTART;
}
/*
* watchdog_start: wrapper to start the watchdog.
* @wdd: the watchdog device to start
*
watchdog: Separate and maintain variables based on variable lifetime All variables required by the watchdog core to manage a watchdog are currently stored in struct watchdog_device. The lifetime of those variables is determined by the watchdog driver. However, the lifetime of variables used by the watchdog core differs from the lifetime of struct watchdog_device. To remedy this situation, watchdog drivers can implement ref and unref callbacks, to be used by the watchdog core to lock struct watchdog_device in memory. While this solves the immediate problem, it depends on watchdog drivers to actually implement the ref/unref callbacks. This is error prone, often not implemented in the first place, or not implemented correctly. To solve the problem without requiring driver support, split the variables in struct watchdog_device into two data structures - one for variables associated with the watchdog driver, one for variables associated with the watchdog core. With this approach, the watchdog core can keep track of its variable lifetime and no longer depends on ref/unref callbacks in the driver. As a side effect, some of the variables originally in struct watchdog_driver are now private to the watchdog core and no longer visible in watchdog drivers. As a side effect of the changes made, an ioctl will now always fail with -ENODEV after a watchdog device was unregistered with the character device still open. Previously, it would only fail with -ENODEV in some situations. Also, ioctl operations are now atomic from driver perspective. With this change, it is now guaranteed that the driver will not unregister a watchdog between a timeout change and the subsequent ping. The 'ref' and 'unref' callbacks in struct watchdog_driver are no longer used and marked as deprecated. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-12-26 08:01:42 +08:00
* The caller must hold wd_data->lock.
*
* Start the watchdog if it is not active and mark it active.
* This function returns zero on success or a negative errno code for
* failure.
*/
static int watchdog_start(struct watchdog_device *wdd)
{
struct watchdog_core_data *wd_data = wdd->wd_data;
ktime_t started_at;
watchdog: Separate and maintain variables based on variable lifetime All variables required by the watchdog core to manage a watchdog are currently stored in struct watchdog_device. The lifetime of those variables is determined by the watchdog driver. However, the lifetime of variables used by the watchdog core differs from the lifetime of struct watchdog_device. To remedy this situation, watchdog drivers can implement ref and unref callbacks, to be used by the watchdog core to lock struct watchdog_device in memory. While this solves the immediate problem, it depends on watchdog drivers to actually implement the ref/unref callbacks. This is error prone, often not implemented in the first place, or not implemented correctly. To solve the problem without requiring driver support, split the variables in struct watchdog_device into two data structures - one for variables associated with the watchdog driver, one for variables associated with the watchdog core. With this approach, the watchdog core can keep track of its variable lifetime and no longer depends on ref/unref callbacks in the driver. As a side effect, some of the variables originally in struct watchdog_driver are now private to the watchdog core and no longer visible in watchdog drivers. As a side effect of the changes made, an ioctl will now always fail with -ENODEV after a watchdog device was unregistered with the character device still open. Previously, it would only fail with -ENODEV in some situations. Also, ioctl operations are now atomic from driver perspective. With this change, it is now guaranteed that the driver will not unregister a watchdog between a timeout change and the subsequent ping. The 'ref' and 'unref' callbacks in struct watchdog_driver are no longer used and marked as deprecated. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-12-26 08:01:42 +08:00
int err;
if (watchdog_active(wdd))
watchdog: Separate and maintain variables based on variable lifetime All variables required by the watchdog core to manage a watchdog are currently stored in struct watchdog_device. The lifetime of those variables is determined by the watchdog driver. However, the lifetime of variables used by the watchdog core differs from the lifetime of struct watchdog_device. To remedy this situation, watchdog drivers can implement ref and unref callbacks, to be used by the watchdog core to lock struct watchdog_device in memory. While this solves the immediate problem, it depends on watchdog drivers to actually implement the ref/unref callbacks. This is error prone, often not implemented in the first place, or not implemented correctly. To solve the problem without requiring driver support, split the variables in struct watchdog_device into two data structures - one for variables associated with the watchdog driver, one for variables associated with the watchdog core. With this approach, the watchdog core can keep track of its variable lifetime and no longer depends on ref/unref callbacks in the driver. As a side effect, some of the variables originally in struct watchdog_driver are now private to the watchdog core and no longer visible in watchdog drivers. As a side effect of the changes made, an ioctl will now always fail with -ENODEV after a watchdog device was unregistered with the character device still open. Previously, it would only fail with -ENODEV in some situations. Also, ioctl operations are now atomic from driver perspective. With this change, it is now guaranteed that the driver will not unregister a watchdog between a timeout change and the subsequent ping. The 'ref' and 'unref' callbacks in struct watchdog_driver are no longer used and marked as deprecated. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-12-26 08:01:42 +08:00
return 0;
set_bit(_WDOG_KEEPALIVE, &wd_data->status);
started_at = ktime_get();
if (watchdog_hw_running(wdd) && wdd->ops->ping) {
err = __watchdog_ping(wdd);
if (err == 0)
set_bit(WDOG_ACTIVE, &wdd->status);
} else {
err = wdd->ops->start(wdd);
if (err == 0) {
set_bit(WDOG_ACTIVE, &wdd->status);
wd_data->last_keepalive = started_at;
wd_data->last_hw_keepalive = started_at;
watchdog_update_worker(wdd);
}
}
return err;
}
/*
* watchdog_stop: wrapper to stop the watchdog.
* @wdd: the watchdog device to stop
*
watchdog: Separate and maintain variables based on variable lifetime All variables required by the watchdog core to manage a watchdog are currently stored in struct watchdog_device. The lifetime of those variables is determined by the watchdog driver. However, the lifetime of variables used by the watchdog core differs from the lifetime of struct watchdog_device. To remedy this situation, watchdog drivers can implement ref and unref callbacks, to be used by the watchdog core to lock struct watchdog_device in memory. While this solves the immediate problem, it depends on watchdog drivers to actually implement the ref/unref callbacks. This is error prone, often not implemented in the first place, or not implemented correctly. To solve the problem without requiring driver support, split the variables in struct watchdog_device into two data structures - one for variables associated with the watchdog driver, one for variables associated with the watchdog core. With this approach, the watchdog core can keep track of its variable lifetime and no longer depends on ref/unref callbacks in the driver. As a side effect, some of the variables originally in struct watchdog_driver are now private to the watchdog core and no longer visible in watchdog drivers. As a side effect of the changes made, an ioctl will now always fail with -ENODEV after a watchdog device was unregistered with the character device still open. Previously, it would only fail with -ENODEV in some situations. Also, ioctl operations are now atomic from driver perspective. With this change, it is now guaranteed that the driver will not unregister a watchdog between a timeout change and the subsequent ping. The 'ref' and 'unref' callbacks in struct watchdog_driver are no longer used and marked as deprecated. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-12-26 08:01:42 +08:00
* The caller must hold wd_data->lock.
*
* Stop the watchdog if it is still active and unmark it active.
* This function returns zero on success or a negative errno code for
* failure.
* If the 'nowayout' feature was set, the watchdog cannot be stopped.
*/
static int watchdog_stop(struct watchdog_device *wdd)
{
int err = 0;
if (!watchdog_active(wdd))
watchdog: Separate and maintain variables based on variable lifetime All variables required by the watchdog core to manage a watchdog are currently stored in struct watchdog_device. The lifetime of those variables is determined by the watchdog driver. However, the lifetime of variables used by the watchdog core differs from the lifetime of struct watchdog_device. To remedy this situation, watchdog drivers can implement ref and unref callbacks, to be used by the watchdog core to lock struct watchdog_device in memory. While this solves the immediate problem, it depends on watchdog drivers to actually implement the ref/unref callbacks. This is error prone, often not implemented in the first place, or not implemented correctly. To solve the problem without requiring driver support, split the variables in struct watchdog_device into two data structures - one for variables associated with the watchdog driver, one for variables associated with the watchdog core. With this approach, the watchdog core can keep track of its variable lifetime and no longer depends on ref/unref callbacks in the driver. As a side effect, some of the variables originally in struct watchdog_driver are now private to the watchdog core and no longer visible in watchdog drivers. As a side effect of the changes made, an ioctl will now always fail with -ENODEV after a watchdog device was unregistered with the character device still open. Previously, it would only fail with -ENODEV in some situations. Also, ioctl operations are now atomic from driver perspective. With this change, it is now guaranteed that the driver will not unregister a watchdog between a timeout change and the subsequent ping. The 'ref' and 'unref' callbacks in struct watchdog_driver are no longer used and marked as deprecated. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-12-26 08:01:42 +08:00
return 0;
if (test_bit(WDOG_NO_WAY_OUT, &wdd->status)) {
pr_info("watchdog%d: nowayout prevents watchdog being stopped!\n",
wdd->id);
watchdog: Separate and maintain variables based on variable lifetime All variables required by the watchdog core to manage a watchdog are currently stored in struct watchdog_device. The lifetime of those variables is determined by the watchdog driver. However, the lifetime of variables used by the watchdog core differs from the lifetime of struct watchdog_device. To remedy this situation, watchdog drivers can implement ref and unref callbacks, to be used by the watchdog core to lock struct watchdog_device in memory. While this solves the immediate problem, it depends on watchdog drivers to actually implement the ref/unref callbacks. This is error prone, often not implemented in the first place, or not implemented correctly. To solve the problem without requiring driver support, split the variables in struct watchdog_device into two data structures - one for variables associated with the watchdog driver, one for variables associated with the watchdog core. With this approach, the watchdog core can keep track of its variable lifetime and no longer depends on ref/unref callbacks in the driver. As a side effect, some of the variables originally in struct watchdog_driver are now private to the watchdog core and no longer visible in watchdog drivers. As a side effect of the changes made, an ioctl will now always fail with -ENODEV after a watchdog device was unregistered with the character device still open. Previously, it would only fail with -ENODEV in some situations. Also, ioctl operations are now atomic from driver perspective. With this change, it is now guaranteed that the driver will not unregister a watchdog between a timeout change and the subsequent ping. The 'ref' and 'unref' callbacks in struct watchdog_driver are no longer used and marked as deprecated. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-12-26 08:01:42 +08:00
return -EBUSY;
}
if (wdd->ops->stop) {
clear_bit(WDOG_HW_RUNNING, &wdd->status);
err = wdd->ops->stop(wdd);
} else {
set_bit(WDOG_HW_RUNNING, &wdd->status);
}
if (err == 0) {
clear_bit(WDOG_ACTIVE, &wdd->status);
watchdog_update_worker(wdd);
}
return err;
}
/*
* watchdog_get_status: wrapper to get the watchdog status
* @wdd: the watchdog device to get the status from
watchdog: Separate and maintain variables based on variable lifetime All variables required by the watchdog core to manage a watchdog are currently stored in struct watchdog_device. The lifetime of those variables is determined by the watchdog driver. However, the lifetime of variables used by the watchdog core differs from the lifetime of struct watchdog_device. To remedy this situation, watchdog drivers can implement ref and unref callbacks, to be used by the watchdog core to lock struct watchdog_device in memory. While this solves the immediate problem, it depends on watchdog drivers to actually implement the ref/unref callbacks. This is error prone, often not implemented in the first place, or not implemented correctly. To solve the problem without requiring driver support, split the variables in struct watchdog_device into two data structures - one for variables associated with the watchdog driver, one for variables associated with the watchdog core. With this approach, the watchdog core can keep track of its variable lifetime and no longer depends on ref/unref callbacks in the driver. As a side effect, some of the variables originally in struct watchdog_driver are now private to the watchdog core and no longer visible in watchdog drivers. As a side effect of the changes made, an ioctl will now always fail with -ENODEV after a watchdog device was unregistered with the character device still open. Previously, it would only fail with -ENODEV in some situations. Also, ioctl operations are now atomic from driver perspective. With this change, it is now guaranteed that the driver will not unregister a watchdog between a timeout change and the subsequent ping. The 'ref' and 'unref' callbacks in struct watchdog_driver are no longer used and marked as deprecated. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-12-26 08:01:42 +08:00
*
* The caller must hold wd_data->lock.
*
* Get the watchdog's status flags.
*/
watchdog: Separate and maintain variables based on variable lifetime All variables required by the watchdog core to manage a watchdog are currently stored in struct watchdog_device. The lifetime of those variables is determined by the watchdog driver. However, the lifetime of variables used by the watchdog core differs from the lifetime of struct watchdog_device. To remedy this situation, watchdog drivers can implement ref and unref callbacks, to be used by the watchdog core to lock struct watchdog_device in memory. While this solves the immediate problem, it depends on watchdog drivers to actually implement the ref/unref callbacks. This is error prone, often not implemented in the first place, or not implemented correctly. To solve the problem without requiring driver support, split the variables in struct watchdog_device into two data structures - one for variables associated with the watchdog driver, one for variables associated with the watchdog core. With this approach, the watchdog core can keep track of its variable lifetime and no longer depends on ref/unref callbacks in the driver. As a side effect, some of the variables originally in struct watchdog_driver are now private to the watchdog core and no longer visible in watchdog drivers. As a side effect of the changes made, an ioctl will now always fail with -ENODEV after a watchdog device was unregistered with the character device still open. Previously, it would only fail with -ENODEV in some situations. Also, ioctl operations are now atomic from driver perspective. With this change, it is now guaranteed that the driver will not unregister a watchdog between a timeout change and the subsequent ping. The 'ref' and 'unref' callbacks in struct watchdog_driver are no longer used and marked as deprecated. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-12-26 08:01:42 +08:00
static unsigned int watchdog_get_status(struct watchdog_device *wdd)
{
struct watchdog_core_data *wd_data = wdd->wd_data;
unsigned int status;
if (wdd->ops->status)
status = wdd->ops->status(wdd);
else
status = wdd->bootstatus & (WDIOF_CARDRESET |
WDIOF_OVERHEAT |
WDIOF_FANFAULT |
WDIOF_EXTERN1 |
WDIOF_EXTERN2 |
WDIOF_POWERUNDER |
WDIOF_POWEROVER);
if (test_bit(_WDOG_ALLOW_RELEASE, &wd_data->status))
status |= WDIOF_MAGICCLOSE;
if (test_and_clear_bit(_WDOG_KEEPALIVE, &wd_data->status))
status |= WDIOF_KEEPALIVEPING;
return status;
}
/*
* watchdog_set_timeout: set the watchdog timer timeout
* @wdd: the watchdog device to set the timeout for
* @timeout: timeout to set in seconds
watchdog: Separate and maintain variables based on variable lifetime All variables required by the watchdog core to manage a watchdog are currently stored in struct watchdog_device. The lifetime of those variables is determined by the watchdog driver. However, the lifetime of variables used by the watchdog core differs from the lifetime of struct watchdog_device. To remedy this situation, watchdog drivers can implement ref and unref callbacks, to be used by the watchdog core to lock struct watchdog_device in memory. While this solves the immediate problem, it depends on watchdog drivers to actually implement the ref/unref callbacks. This is error prone, often not implemented in the first place, or not implemented correctly. To solve the problem without requiring driver support, split the variables in struct watchdog_device into two data structures - one for variables associated with the watchdog driver, one for variables associated with the watchdog core. With this approach, the watchdog core can keep track of its variable lifetime and no longer depends on ref/unref callbacks in the driver. As a side effect, some of the variables originally in struct watchdog_driver are now private to the watchdog core and no longer visible in watchdog drivers. As a side effect of the changes made, an ioctl will now always fail with -ENODEV after a watchdog device was unregistered with the character device still open. Previously, it would only fail with -ENODEV in some situations. Also, ioctl operations are now atomic from driver perspective. With this change, it is now guaranteed that the driver will not unregister a watchdog between a timeout change and the subsequent ping. The 'ref' and 'unref' callbacks in struct watchdog_driver are no longer used and marked as deprecated. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-12-26 08:01:42 +08:00
*
* The caller must hold wd_data->lock.
*/
static int watchdog_set_timeout(struct watchdog_device *wdd,
unsigned int timeout)
{
int err = 0;
if (!(wdd->info->options & WDIOF_SETTIMEOUT))
return -EOPNOTSUPP;
if (watchdog_timeout_invalid(wdd, timeout))
return -EINVAL;
if (wdd->ops->set_timeout) {
err = wdd->ops->set_timeout(wdd, timeout);
} else {
wdd->timeout = timeout;
/* Disable pretimeout if it doesn't fit the new timeout */
if (wdd->pretimeout >= wdd->timeout)
wdd->pretimeout = 0;
}
watchdog_update_worker(wdd);
return err;
}
/*
* watchdog_set_pretimeout: set the watchdog timer pretimeout
* @wdd: the watchdog device to set the timeout for
* @timeout: pretimeout to set in seconds
*/
static int watchdog_set_pretimeout(struct watchdog_device *wdd,
unsigned int timeout)
{
int err = 0;
if (!(wdd->info->options & WDIOF_PRETIMEOUT))
return -EOPNOTSUPP;
if (watchdog_pretimeout_invalid(wdd, timeout))
return -EINVAL;
if (wdd->ops->set_pretimeout)
err = wdd->ops->set_pretimeout(wdd, timeout);
else
wdd->pretimeout = timeout;
return err;
}
/*
* watchdog_get_timeleft: wrapper to get the time left before a reboot
* @wdd: the watchdog device to get the remaining time from
* @timeleft: the time that's left
*
watchdog: Separate and maintain variables based on variable lifetime All variables required by the watchdog core to manage a watchdog are currently stored in struct watchdog_device. The lifetime of those variables is determined by the watchdog driver. However, the lifetime of variables used by the watchdog core differs from the lifetime of struct watchdog_device. To remedy this situation, watchdog drivers can implement ref and unref callbacks, to be used by the watchdog core to lock struct watchdog_device in memory. While this solves the immediate problem, it depends on watchdog drivers to actually implement the ref/unref callbacks. This is error prone, often not implemented in the first place, or not implemented correctly. To solve the problem without requiring driver support, split the variables in struct watchdog_device into two data structures - one for variables associated with the watchdog driver, one for variables associated with the watchdog core. With this approach, the watchdog core can keep track of its variable lifetime and no longer depends on ref/unref callbacks in the driver. As a side effect, some of the variables originally in struct watchdog_driver are now private to the watchdog core and no longer visible in watchdog drivers. As a side effect of the changes made, an ioctl will now always fail with -ENODEV after a watchdog device was unregistered with the character device still open. Previously, it would only fail with -ENODEV in some situations. Also, ioctl operations are now atomic from driver perspective. With this change, it is now guaranteed that the driver will not unregister a watchdog between a timeout change and the subsequent ping. The 'ref' and 'unref' callbacks in struct watchdog_driver are no longer used and marked as deprecated. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-12-26 08:01:42 +08:00
* The caller must hold wd_data->lock.
*
* Get the time before a watchdog will reboot (if not pinged).
*/
static int watchdog_get_timeleft(struct watchdog_device *wdd,
unsigned int *timeleft)
{
*timeleft = 0;
watchdog: Separate and maintain variables based on variable lifetime All variables required by the watchdog core to manage a watchdog are currently stored in struct watchdog_device. The lifetime of those variables is determined by the watchdog driver. However, the lifetime of variables used by the watchdog core differs from the lifetime of struct watchdog_device. To remedy this situation, watchdog drivers can implement ref and unref callbacks, to be used by the watchdog core to lock struct watchdog_device in memory. While this solves the immediate problem, it depends on watchdog drivers to actually implement the ref/unref callbacks. This is error prone, often not implemented in the first place, or not implemented correctly. To solve the problem without requiring driver support, split the variables in struct watchdog_device into two data structures - one for variables associated with the watchdog driver, one for variables associated with the watchdog core. With this approach, the watchdog core can keep track of its variable lifetime and no longer depends on ref/unref callbacks in the driver. As a side effect, some of the variables originally in struct watchdog_driver are now private to the watchdog core and no longer visible in watchdog drivers. As a side effect of the changes made, an ioctl will now always fail with -ENODEV after a watchdog device was unregistered with the character device still open. Previously, it would only fail with -ENODEV in some situations. Also, ioctl operations are now atomic from driver perspective. With this change, it is now guaranteed that the driver will not unregister a watchdog between a timeout change and the subsequent ping. The 'ref' and 'unref' callbacks in struct watchdog_driver are no longer used and marked as deprecated. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-12-26 08:01:42 +08:00
if (!wdd->ops->get_timeleft)
return -EOPNOTSUPP;
*timeleft = wdd->ops->get_timeleft(wdd);
watchdog: Separate and maintain variables based on variable lifetime All variables required by the watchdog core to manage a watchdog are currently stored in struct watchdog_device. The lifetime of those variables is determined by the watchdog driver. However, the lifetime of variables used by the watchdog core differs from the lifetime of struct watchdog_device. To remedy this situation, watchdog drivers can implement ref and unref callbacks, to be used by the watchdog core to lock struct watchdog_device in memory. While this solves the immediate problem, it depends on watchdog drivers to actually implement the ref/unref callbacks. This is error prone, often not implemented in the first place, or not implemented correctly. To solve the problem without requiring driver support, split the variables in struct watchdog_device into two data structures - one for variables associated with the watchdog driver, one for variables associated with the watchdog core. With this approach, the watchdog core can keep track of its variable lifetime and no longer depends on ref/unref callbacks in the driver. As a side effect, some of the variables originally in struct watchdog_driver are now private to the watchdog core and no longer visible in watchdog drivers. As a side effect of the changes made, an ioctl will now always fail with -ENODEV after a watchdog device was unregistered with the character device still open. Previously, it would only fail with -ENODEV in some situations. Also, ioctl operations are now atomic from driver perspective. With this change, it is now guaranteed that the driver will not unregister a watchdog between a timeout change and the subsequent ping. The 'ref' and 'unref' callbacks in struct watchdog_driver are no longer used and marked as deprecated. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-12-26 08:01:42 +08:00
return 0;
}
#ifdef CONFIG_WATCHDOG_SYSFS
static ssize_t nowayout_show(struct device *dev, struct device_attribute *attr,
char *buf)
{
struct watchdog_device *wdd = dev_get_drvdata(dev);
return sprintf(buf, "%d\n", !!test_bit(WDOG_NO_WAY_OUT, &wdd->status));
}
static ssize_t nowayout_store(struct device *dev, struct device_attribute *attr,
const char *buf, size_t len)
{
struct watchdog_device *wdd = dev_get_drvdata(dev);
unsigned int value;
int ret;
ret = kstrtouint(buf, 0, &value);
if (ret)
return ret;
if (value > 1)
return -EINVAL;
/* nowayout cannot be disabled once set */
if (test_bit(WDOG_NO_WAY_OUT, &wdd->status) && !value)
return -EPERM;
watchdog_set_nowayout(wdd, value);
return len;
}
static DEVICE_ATTR_RW(nowayout);
static ssize_t status_show(struct device *dev, struct device_attribute *attr,
char *buf)
{
struct watchdog_device *wdd = dev_get_drvdata(dev);
watchdog: Separate and maintain variables based on variable lifetime All variables required by the watchdog core to manage a watchdog are currently stored in struct watchdog_device. The lifetime of those variables is determined by the watchdog driver. However, the lifetime of variables used by the watchdog core differs from the lifetime of struct watchdog_device. To remedy this situation, watchdog drivers can implement ref and unref callbacks, to be used by the watchdog core to lock struct watchdog_device in memory. While this solves the immediate problem, it depends on watchdog drivers to actually implement the ref/unref callbacks. This is error prone, often not implemented in the first place, or not implemented correctly. To solve the problem without requiring driver support, split the variables in struct watchdog_device into two data structures - one for variables associated with the watchdog driver, one for variables associated with the watchdog core. With this approach, the watchdog core can keep track of its variable lifetime and no longer depends on ref/unref callbacks in the driver. As a side effect, some of the variables originally in struct watchdog_driver are now private to the watchdog core and no longer visible in watchdog drivers. As a side effect of the changes made, an ioctl will now always fail with -ENODEV after a watchdog device was unregistered with the character device still open. Previously, it would only fail with -ENODEV in some situations. Also, ioctl operations are now atomic from driver perspective. With this change, it is now guaranteed that the driver will not unregister a watchdog between a timeout change and the subsequent ping. The 'ref' and 'unref' callbacks in struct watchdog_driver are no longer used and marked as deprecated. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-12-26 08:01:42 +08:00
struct watchdog_core_data *wd_data = wdd->wd_data;
unsigned int status;
watchdog: Separate and maintain variables based on variable lifetime All variables required by the watchdog core to manage a watchdog are currently stored in struct watchdog_device. The lifetime of those variables is determined by the watchdog driver. However, the lifetime of variables used by the watchdog core differs from the lifetime of struct watchdog_device. To remedy this situation, watchdog drivers can implement ref and unref callbacks, to be used by the watchdog core to lock struct watchdog_device in memory. While this solves the immediate problem, it depends on watchdog drivers to actually implement the ref/unref callbacks. This is error prone, often not implemented in the first place, or not implemented correctly. To solve the problem without requiring driver support, split the variables in struct watchdog_device into two data structures - one for variables associated with the watchdog driver, one for variables associated with the watchdog core. With this approach, the watchdog core can keep track of its variable lifetime and no longer depends on ref/unref callbacks in the driver. As a side effect, some of the variables originally in struct watchdog_driver are now private to the watchdog core and no longer visible in watchdog drivers. As a side effect of the changes made, an ioctl will now always fail with -ENODEV after a watchdog device was unregistered with the character device still open. Previously, it would only fail with -ENODEV in some situations. Also, ioctl operations are now atomic from driver perspective. With this change, it is now guaranteed that the driver will not unregister a watchdog between a timeout change and the subsequent ping. The 'ref' and 'unref' callbacks in struct watchdog_driver are no longer used and marked as deprecated. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-12-26 08:01:42 +08:00
mutex_lock(&wd_data->lock);
status = watchdog_get_status(wdd);
mutex_unlock(&wd_data->lock);
return sprintf(buf, "0x%x\n", status);
}
static DEVICE_ATTR_RO(status);
static ssize_t bootstatus_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
struct watchdog_device *wdd = dev_get_drvdata(dev);
return sprintf(buf, "%u\n", wdd->bootstatus);
}
static DEVICE_ATTR_RO(bootstatus);
static ssize_t timeleft_show(struct device *dev, struct device_attribute *attr,
char *buf)
{
struct watchdog_device *wdd = dev_get_drvdata(dev);
watchdog: Separate and maintain variables based on variable lifetime All variables required by the watchdog core to manage a watchdog are currently stored in struct watchdog_device. The lifetime of those variables is determined by the watchdog driver. However, the lifetime of variables used by the watchdog core differs from the lifetime of struct watchdog_device. To remedy this situation, watchdog drivers can implement ref and unref callbacks, to be used by the watchdog core to lock struct watchdog_device in memory. While this solves the immediate problem, it depends on watchdog drivers to actually implement the ref/unref callbacks. This is error prone, often not implemented in the first place, or not implemented correctly. To solve the problem without requiring driver support, split the variables in struct watchdog_device into two data structures - one for variables associated with the watchdog driver, one for variables associated with the watchdog core. With this approach, the watchdog core can keep track of its variable lifetime and no longer depends on ref/unref callbacks in the driver. As a side effect, some of the variables originally in struct watchdog_driver are now private to the watchdog core and no longer visible in watchdog drivers. As a side effect of the changes made, an ioctl will now always fail with -ENODEV after a watchdog device was unregistered with the character device still open. Previously, it would only fail with -ENODEV in some situations. Also, ioctl operations are now atomic from driver perspective. With this change, it is now guaranteed that the driver will not unregister a watchdog between a timeout change and the subsequent ping. The 'ref' and 'unref' callbacks in struct watchdog_driver are no longer used and marked as deprecated. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-12-26 08:01:42 +08:00
struct watchdog_core_data *wd_data = wdd->wd_data;
ssize_t status;
unsigned int val;
watchdog: Separate and maintain variables based on variable lifetime All variables required by the watchdog core to manage a watchdog are currently stored in struct watchdog_device. The lifetime of those variables is determined by the watchdog driver. However, the lifetime of variables used by the watchdog core differs from the lifetime of struct watchdog_device. To remedy this situation, watchdog drivers can implement ref and unref callbacks, to be used by the watchdog core to lock struct watchdog_device in memory. While this solves the immediate problem, it depends on watchdog drivers to actually implement the ref/unref callbacks. This is error prone, often not implemented in the first place, or not implemented correctly. To solve the problem without requiring driver support, split the variables in struct watchdog_device into two data structures - one for variables associated with the watchdog driver, one for variables associated with the watchdog core. With this approach, the watchdog core can keep track of its variable lifetime and no longer depends on ref/unref callbacks in the driver. As a side effect, some of the variables originally in struct watchdog_driver are now private to the watchdog core and no longer visible in watchdog drivers. As a side effect of the changes made, an ioctl will now always fail with -ENODEV after a watchdog device was unregistered with the character device still open. Previously, it would only fail with -ENODEV in some situations. Also, ioctl operations are now atomic from driver perspective. With this change, it is now guaranteed that the driver will not unregister a watchdog between a timeout change and the subsequent ping. The 'ref' and 'unref' callbacks in struct watchdog_driver are no longer used and marked as deprecated. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-12-26 08:01:42 +08:00
mutex_lock(&wd_data->lock);
status = watchdog_get_timeleft(wdd, &val);
watchdog: Separate and maintain variables based on variable lifetime All variables required by the watchdog core to manage a watchdog are currently stored in struct watchdog_device. The lifetime of those variables is determined by the watchdog driver. However, the lifetime of variables used by the watchdog core differs from the lifetime of struct watchdog_device. To remedy this situation, watchdog drivers can implement ref and unref callbacks, to be used by the watchdog core to lock struct watchdog_device in memory. While this solves the immediate problem, it depends on watchdog drivers to actually implement the ref/unref callbacks. This is error prone, often not implemented in the first place, or not implemented correctly. To solve the problem without requiring driver support, split the variables in struct watchdog_device into two data structures - one for variables associated with the watchdog driver, one for variables associated with the watchdog core. With this approach, the watchdog core can keep track of its variable lifetime and no longer depends on ref/unref callbacks in the driver. As a side effect, some of the variables originally in struct watchdog_driver are now private to the watchdog core and no longer visible in watchdog drivers. As a side effect of the changes made, an ioctl will now always fail with -ENODEV after a watchdog device was unregistered with the character device still open. Previously, it would only fail with -ENODEV in some situations. Also, ioctl operations are now atomic from driver perspective. With this change, it is now guaranteed that the driver will not unregister a watchdog between a timeout change and the subsequent ping. The 'ref' and 'unref' callbacks in struct watchdog_driver are no longer used and marked as deprecated. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-12-26 08:01:42 +08:00
mutex_unlock(&wd_data->lock);
if (!status)
status = sprintf(buf, "%u\n", val);
return status;
}
static DEVICE_ATTR_RO(timeleft);
static ssize_t timeout_show(struct device *dev, struct device_attribute *attr,
char *buf)
{
struct watchdog_device *wdd = dev_get_drvdata(dev);
return sprintf(buf, "%u\n", wdd->timeout);
}
static DEVICE_ATTR_RO(timeout);
static ssize_t pretimeout_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
struct watchdog_device *wdd = dev_get_drvdata(dev);
return sprintf(buf, "%u\n", wdd->pretimeout);
}
static DEVICE_ATTR_RO(pretimeout);
static ssize_t identity_show(struct device *dev, struct device_attribute *attr,
char *buf)
{
struct watchdog_device *wdd = dev_get_drvdata(dev);
return sprintf(buf, "%s\n", wdd->info->identity);
}
static DEVICE_ATTR_RO(identity);
static ssize_t state_show(struct device *dev, struct device_attribute *attr,
char *buf)
{
struct watchdog_device *wdd = dev_get_drvdata(dev);
if (watchdog_active(wdd))
return sprintf(buf, "active\n");
return sprintf(buf, "inactive\n");
}
static DEVICE_ATTR_RO(state);
static ssize_t pretimeout_available_governors_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
return watchdog_pretimeout_available_governors_get(buf);
}
static DEVICE_ATTR_RO(pretimeout_available_governors);
static ssize_t pretimeout_governor_show(struct device *dev,
struct device_attribute *attr,
char *buf)
{
struct watchdog_device *wdd = dev_get_drvdata(dev);
return watchdog_pretimeout_governor_get(wdd, buf);
}
static ssize_t pretimeout_governor_store(struct device *dev,
struct device_attribute *attr,
const char *buf, size_t count)
{
struct watchdog_device *wdd = dev_get_drvdata(dev);
int ret = watchdog_pretimeout_governor_set(wdd, buf);
if (!ret)
ret = count;
return ret;
}
static DEVICE_ATTR_RW(pretimeout_governor);
static umode_t wdt_is_visible(struct kobject *kobj, struct attribute *attr,
int n)
{
struct device *dev = kobj_to_dev(kobj);
struct watchdog_device *wdd = dev_get_drvdata(dev);
umode_t mode = attr->mode;
if (attr == &dev_attr_timeleft.attr && !wdd->ops->get_timeleft)
mode = 0;
else if (attr == &dev_attr_pretimeout.attr &&
!(wdd->info->options & WDIOF_PRETIMEOUT))
mode = 0;
else if ((attr == &dev_attr_pretimeout_governor.attr ||
attr == &dev_attr_pretimeout_available_governors.attr) &&
(!(wdd->info->options & WDIOF_PRETIMEOUT) ||
!IS_ENABLED(CONFIG_WATCHDOG_PRETIMEOUT_GOV)))
mode = 0;
return mode;
}
static struct attribute *wdt_attrs[] = {
&dev_attr_state.attr,
&dev_attr_identity.attr,
&dev_attr_timeout.attr,
&dev_attr_pretimeout.attr,
&dev_attr_timeleft.attr,
&dev_attr_bootstatus.attr,
&dev_attr_status.attr,
&dev_attr_nowayout.attr,
&dev_attr_pretimeout_governor.attr,
&dev_attr_pretimeout_available_governors.attr,
NULL,
};
static const struct attribute_group wdt_group = {
.attrs = wdt_attrs,
.is_visible = wdt_is_visible,
};
__ATTRIBUTE_GROUPS(wdt);
#else
#define wdt_groups NULL
#endif
/*
* watchdog_ioctl_op: call the watchdog drivers ioctl op if defined
* @wdd: the watchdog device to do the ioctl on
* @cmd: watchdog command
* @arg: argument pointer
watchdog: Separate and maintain variables based on variable lifetime All variables required by the watchdog core to manage a watchdog are currently stored in struct watchdog_device. The lifetime of those variables is determined by the watchdog driver. However, the lifetime of variables used by the watchdog core differs from the lifetime of struct watchdog_device. To remedy this situation, watchdog drivers can implement ref and unref callbacks, to be used by the watchdog core to lock struct watchdog_device in memory. While this solves the immediate problem, it depends on watchdog drivers to actually implement the ref/unref callbacks. This is error prone, often not implemented in the first place, or not implemented correctly. To solve the problem without requiring driver support, split the variables in struct watchdog_device into two data structures - one for variables associated with the watchdog driver, one for variables associated with the watchdog core. With this approach, the watchdog core can keep track of its variable lifetime and no longer depends on ref/unref callbacks in the driver. As a side effect, some of the variables originally in struct watchdog_driver are now private to the watchdog core and no longer visible in watchdog drivers. As a side effect of the changes made, an ioctl will now always fail with -ENODEV after a watchdog device was unregistered with the character device still open. Previously, it would only fail with -ENODEV in some situations. Also, ioctl operations are now atomic from driver perspective. With this change, it is now guaranteed that the driver will not unregister a watchdog between a timeout change and the subsequent ping. The 'ref' and 'unref' callbacks in struct watchdog_driver are no longer used and marked as deprecated. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-12-26 08:01:42 +08:00
*
* The caller must hold wd_data->lock.
*/
static int watchdog_ioctl_op(struct watchdog_device *wdd, unsigned int cmd,
unsigned long arg)
{
if (!wdd->ops->ioctl)
return -ENOIOCTLCMD;
watchdog: Separate and maintain variables based on variable lifetime All variables required by the watchdog core to manage a watchdog are currently stored in struct watchdog_device. The lifetime of those variables is determined by the watchdog driver. However, the lifetime of variables used by the watchdog core differs from the lifetime of struct watchdog_device. To remedy this situation, watchdog drivers can implement ref and unref callbacks, to be used by the watchdog core to lock struct watchdog_device in memory. While this solves the immediate problem, it depends on watchdog drivers to actually implement the ref/unref callbacks. This is error prone, often not implemented in the first place, or not implemented correctly. To solve the problem without requiring driver support, split the variables in struct watchdog_device into two data structures - one for variables associated with the watchdog driver, one for variables associated with the watchdog core. With this approach, the watchdog core can keep track of its variable lifetime and no longer depends on ref/unref callbacks in the driver. As a side effect, some of the variables originally in struct watchdog_driver are now private to the watchdog core and no longer visible in watchdog drivers. As a side effect of the changes made, an ioctl will now always fail with -ENODEV after a watchdog device was unregistered with the character device still open. Previously, it would only fail with -ENODEV in some situations. Also, ioctl operations are now atomic from driver perspective. With this change, it is now guaranteed that the driver will not unregister a watchdog between a timeout change and the subsequent ping. The 'ref' and 'unref' callbacks in struct watchdog_driver are no longer used and marked as deprecated. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-12-26 08:01:42 +08:00
return wdd->ops->ioctl(wdd, cmd, arg);
}
/*
* watchdog_write: writes to the watchdog.
* @file: file from VFS
* @data: user address of data
* @len: length of data
* @ppos: pointer to the file offset
*
* A write to a watchdog device is defined as a keepalive ping.
* Writing the magic 'V' sequence allows the next close to turn
* off the watchdog (if 'nowayout' is not set).
*/
static ssize_t watchdog_write(struct file *file, const char __user *data,
size_t len, loff_t *ppos)
{
watchdog: Separate and maintain variables based on variable lifetime All variables required by the watchdog core to manage a watchdog are currently stored in struct watchdog_device. The lifetime of those variables is determined by the watchdog driver. However, the lifetime of variables used by the watchdog core differs from the lifetime of struct watchdog_device. To remedy this situation, watchdog drivers can implement ref and unref callbacks, to be used by the watchdog core to lock struct watchdog_device in memory. While this solves the immediate problem, it depends on watchdog drivers to actually implement the ref/unref callbacks. This is error prone, often not implemented in the first place, or not implemented correctly. To solve the problem without requiring driver support, split the variables in struct watchdog_device into two data structures - one for variables associated with the watchdog driver, one for variables associated with the watchdog core. With this approach, the watchdog core can keep track of its variable lifetime and no longer depends on ref/unref callbacks in the driver. As a side effect, some of the variables originally in struct watchdog_driver are now private to the watchdog core and no longer visible in watchdog drivers. As a side effect of the changes made, an ioctl will now always fail with -ENODEV after a watchdog device was unregistered with the character device still open. Previously, it would only fail with -ENODEV in some situations. Also, ioctl operations are now atomic from driver perspective. With this change, it is now guaranteed that the driver will not unregister a watchdog between a timeout change and the subsequent ping. The 'ref' and 'unref' callbacks in struct watchdog_driver are no longer used and marked as deprecated. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-12-26 08:01:42 +08:00
struct watchdog_core_data *wd_data = file->private_data;
struct watchdog_device *wdd;
int err;
size_t i;
char c;
if (len == 0)
return 0;
/*
* Note: just in case someone wrote the magic character
* five months ago...
*/
watchdog: Separate and maintain variables based on variable lifetime All variables required by the watchdog core to manage a watchdog are currently stored in struct watchdog_device. The lifetime of those variables is determined by the watchdog driver. However, the lifetime of variables used by the watchdog core differs from the lifetime of struct watchdog_device. To remedy this situation, watchdog drivers can implement ref and unref callbacks, to be used by the watchdog core to lock struct watchdog_device in memory. While this solves the immediate problem, it depends on watchdog drivers to actually implement the ref/unref callbacks. This is error prone, often not implemented in the first place, or not implemented correctly. To solve the problem without requiring driver support, split the variables in struct watchdog_device into two data structures - one for variables associated with the watchdog driver, one for variables associated with the watchdog core. With this approach, the watchdog core can keep track of its variable lifetime and no longer depends on ref/unref callbacks in the driver. As a side effect, some of the variables originally in struct watchdog_driver are now private to the watchdog core and no longer visible in watchdog drivers. As a side effect of the changes made, an ioctl will now always fail with -ENODEV after a watchdog device was unregistered with the character device still open. Previously, it would only fail with -ENODEV in some situations. Also, ioctl operations are now atomic from driver perspective. With this change, it is now guaranteed that the driver will not unregister a watchdog between a timeout change and the subsequent ping. The 'ref' and 'unref' callbacks in struct watchdog_driver are no longer used and marked as deprecated. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-12-26 08:01:42 +08:00
clear_bit(_WDOG_ALLOW_RELEASE, &wd_data->status);
/* scan to see whether or not we got the magic character */
for (i = 0; i != len; i++) {
if (get_user(c, data + i))
return -EFAULT;
if (c == 'V')
watchdog: Separate and maintain variables based on variable lifetime All variables required by the watchdog core to manage a watchdog are currently stored in struct watchdog_device. The lifetime of those variables is determined by the watchdog driver. However, the lifetime of variables used by the watchdog core differs from the lifetime of struct watchdog_device. To remedy this situation, watchdog drivers can implement ref and unref callbacks, to be used by the watchdog core to lock struct watchdog_device in memory. While this solves the immediate problem, it depends on watchdog drivers to actually implement the ref/unref callbacks. This is error prone, often not implemented in the first place, or not implemented correctly. To solve the problem without requiring driver support, split the variables in struct watchdog_device into two data structures - one for variables associated with the watchdog driver, one for variables associated with the watchdog core. With this approach, the watchdog core can keep track of its variable lifetime and no longer depends on ref/unref callbacks in the driver. As a side effect, some of the variables originally in struct watchdog_driver are now private to the watchdog core and no longer visible in watchdog drivers. As a side effect of the changes made, an ioctl will now always fail with -ENODEV after a watchdog device was unregistered with the character device still open. Previously, it would only fail with -ENODEV in some situations. Also, ioctl operations are now atomic from driver perspective. With this change, it is now guaranteed that the driver will not unregister a watchdog between a timeout change and the subsequent ping. The 'ref' and 'unref' callbacks in struct watchdog_driver are no longer used and marked as deprecated. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-12-26 08:01:42 +08:00
set_bit(_WDOG_ALLOW_RELEASE, &wd_data->status);
}
/* someone wrote to us, so we send the watchdog a keepalive ping */
watchdog: Separate and maintain variables based on variable lifetime All variables required by the watchdog core to manage a watchdog are currently stored in struct watchdog_device. The lifetime of those variables is determined by the watchdog driver. However, the lifetime of variables used by the watchdog core differs from the lifetime of struct watchdog_device. To remedy this situation, watchdog drivers can implement ref and unref callbacks, to be used by the watchdog core to lock struct watchdog_device in memory. While this solves the immediate problem, it depends on watchdog drivers to actually implement the ref/unref callbacks. This is error prone, often not implemented in the first place, or not implemented correctly. To solve the problem without requiring driver support, split the variables in struct watchdog_device into two data structures - one for variables associated with the watchdog driver, one for variables associated with the watchdog core. With this approach, the watchdog core can keep track of its variable lifetime and no longer depends on ref/unref callbacks in the driver. As a side effect, some of the variables originally in struct watchdog_driver are now private to the watchdog core and no longer visible in watchdog drivers. As a side effect of the changes made, an ioctl will now always fail with -ENODEV after a watchdog device was unregistered with the character device still open. Previously, it would only fail with -ENODEV in some situations. Also, ioctl operations are now atomic from driver perspective. With this change, it is now guaranteed that the driver will not unregister a watchdog between a timeout change and the subsequent ping. The 'ref' and 'unref' callbacks in struct watchdog_driver are no longer used and marked as deprecated. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-12-26 08:01:42 +08:00
err = -ENODEV;
mutex_lock(&wd_data->lock);
wdd = wd_data->wdd;
if (wdd)
err = watchdog_ping(wdd);
mutex_unlock(&wd_data->lock);
if (err < 0)
return err;
return len;
}
/*
* watchdog_ioctl: handle the different ioctl's for the watchdog device.
* @file: file handle to the device
* @cmd: watchdog command
* @arg: argument pointer
*
* The watchdog API defines a common set of functions for all watchdogs
* according to their available features.
*/
static long watchdog_ioctl(struct file *file, unsigned int cmd,
unsigned long arg)
{
watchdog: Separate and maintain variables based on variable lifetime All variables required by the watchdog core to manage a watchdog are currently stored in struct watchdog_device. The lifetime of those variables is determined by the watchdog driver. However, the lifetime of variables used by the watchdog core differs from the lifetime of struct watchdog_device. To remedy this situation, watchdog drivers can implement ref and unref callbacks, to be used by the watchdog core to lock struct watchdog_device in memory. While this solves the immediate problem, it depends on watchdog drivers to actually implement the ref/unref callbacks. This is error prone, often not implemented in the first place, or not implemented correctly. To solve the problem without requiring driver support, split the variables in struct watchdog_device into two data structures - one for variables associated with the watchdog driver, one for variables associated with the watchdog core. With this approach, the watchdog core can keep track of its variable lifetime and no longer depends on ref/unref callbacks in the driver. As a side effect, some of the variables originally in struct watchdog_driver are now private to the watchdog core and no longer visible in watchdog drivers. As a side effect of the changes made, an ioctl will now always fail with -ENODEV after a watchdog device was unregistered with the character device still open. Previously, it would only fail with -ENODEV in some situations. Also, ioctl operations are now atomic from driver perspective. With this change, it is now guaranteed that the driver will not unregister a watchdog between a timeout change and the subsequent ping. The 'ref' and 'unref' callbacks in struct watchdog_driver are no longer used and marked as deprecated. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-12-26 08:01:42 +08:00
struct watchdog_core_data *wd_data = file->private_data;
void __user *argp = (void __user *)arg;
watchdog: Separate and maintain variables based on variable lifetime All variables required by the watchdog core to manage a watchdog are currently stored in struct watchdog_device. The lifetime of those variables is determined by the watchdog driver. However, the lifetime of variables used by the watchdog core differs from the lifetime of struct watchdog_device. To remedy this situation, watchdog drivers can implement ref and unref callbacks, to be used by the watchdog core to lock struct watchdog_device in memory. While this solves the immediate problem, it depends on watchdog drivers to actually implement the ref/unref callbacks. This is error prone, often not implemented in the first place, or not implemented correctly. To solve the problem without requiring driver support, split the variables in struct watchdog_device into two data structures - one for variables associated with the watchdog driver, one for variables associated with the watchdog core. With this approach, the watchdog core can keep track of its variable lifetime and no longer depends on ref/unref callbacks in the driver. As a side effect, some of the variables originally in struct watchdog_driver are now private to the watchdog core and no longer visible in watchdog drivers. As a side effect of the changes made, an ioctl will now always fail with -ENODEV after a watchdog device was unregistered with the character device still open. Previously, it would only fail with -ENODEV in some situations. Also, ioctl operations are now atomic from driver perspective. With this change, it is now guaranteed that the driver will not unregister a watchdog between a timeout change and the subsequent ping. The 'ref' and 'unref' callbacks in struct watchdog_driver are no longer used and marked as deprecated. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-12-26 08:01:42 +08:00
struct watchdog_device *wdd;
int __user *p = argp;
unsigned int val;
int err;
watchdog: Separate and maintain variables based on variable lifetime All variables required by the watchdog core to manage a watchdog are currently stored in struct watchdog_device. The lifetime of those variables is determined by the watchdog driver. However, the lifetime of variables used by the watchdog core differs from the lifetime of struct watchdog_device. To remedy this situation, watchdog drivers can implement ref and unref callbacks, to be used by the watchdog core to lock struct watchdog_device in memory. While this solves the immediate problem, it depends on watchdog drivers to actually implement the ref/unref callbacks. This is error prone, often not implemented in the first place, or not implemented correctly. To solve the problem without requiring driver support, split the variables in struct watchdog_device into two data structures - one for variables associated with the watchdog driver, one for variables associated with the watchdog core. With this approach, the watchdog core can keep track of its variable lifetime and no longer depends on ref/unref callbacks in the driver. As a side effect, some of the variables originally in struct watchdog_driver are now private to the watchdog core and no longer visible in watchdog drivers. As a side effect of the changes made, an ioctl will now always fail with -ENODEV after a watchdog device was unregistered with the character device still open. Previously, it would only fail with -ENODEV in some situations. Also, ioctl operations are now atomic from driver perspective. With this change, it is now guaranteed that the driver will not unregister a watchdog between a timeout change and the subsequent ping. The 'ref' and 'unref' callbacks in struct watchdog_driver are no longer used and marked as deprecated. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-12-26 08:01:42 +08:00
mutex_lock(&wd_data->lock);
wdd = wd_data->wdd;
if (!wdd) {
err = -ENODEV;
goto out_ioctl;
}
err = watchdog_ioctl_op(wdd, cmd, arg);
if (err != -ENOIOCTLCMD)
watchdog: Separate and maintain variables based on variable lifetime All variables required by the watchdog core to manage a watchdog are currently stored in struct watchdog_device. The lifetime of those variables is determined by the watchdog driver. However, the lifetime of variables used by the watchdog core differs from the lifetime of struct watchdog_device. To remedy this situation, watchdog drivers can implement ref and unref callbacks, to be used by the watchdog core to lock struct watchdog_device in memory. While this solves the immediate problem, it depends on watchdog drivers to actually implement the ref/unref callbacks. This is error prone, often not implemented in the first place, or not implemented correctly. To solve the problem without requiring driver support, split the variables in struct watchdog_device into two data structures - one for variables associated with the watchdog driver, one for variables associated with the watchdog core. With this approach, the watchdog core can keep track of its variable lifetime and no longer depends on ref/unref callbacks in the driver. As a side effect, some of the variables originally in struct watchdog_driver are now private to the watchdog core and no longer visible in watchdog drivers. As a side effect of the changes made, an ioctl will now always fail with -ENODEV after a watchdog device was unregistered with the character device still open. Previously, it would only fail with -ENODEV in some situations. Also, ioctl operations are now atomic from driver perspective. With this change, it is now guaranteed that the driver will not unregister a watchdog between a timeout change and the subsequent ping. The 'ref' and 'unref' callbacks in struct watchdog_driver are no longer used and marked as deprecated. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-12-26 08:01:42 +08:00
goto out_ioctl;
switch (cmd) {
case WDIOC_GETSUPPORT:
watchdog: Separate and maintain variables based on variable lifetime All variables required by the watchdog core to manage a watchdog are currently stored in struct watchdog_device. The lifetime of those variables is determined by the watchdog driver. However, the lifetime of variables used by the watchdog core differs from the lifetime of struct watchdog_device. To remedy this situation, watchdog drivers can implement ref and unref callbacks, to be used by the watchdog core to lock struct watchdog_device in memory. While this solves the immediate problem, it depends on watchdog drivers to actually implement the ref/unref callbacks. This is error prone, often not implemented in the first place, or not implemented correctly. To solve the problem without requiring driver support, split the variables in struct watchdog_device into two data structures - one for variables associated with the watchdog driver, one for variables associated with the watchdog core. With this approach, the watchdog core can keep track of its variable lifetime and no longer depends on ref/unref callbacks in the driver. As a side effect, some of the variables originally in struct watchdog_driver are now private to the watchdog core and no longer visible in watchdog drivers. As a side effect of the changes made, an ioctl will now always fail with -ENODEV after a watchdog device was unregistered with the character device still open. Previously, it would only fail with -ENODEV in some situations. Also, ioctl operations are now atomic from driver perspective. With this change, it is now guaranteed that the driver will not unregister a watchdog between a timeout change and the subsequent ping. The 'ref' and 'unref' callbacks in struct watchdog_driver are no longer used and marked as deprecated. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-12-26 08:01:42 +08:00
err = copy_to_user(argp, wdd->info,
sizeof(struct watchdog_info)) ? -EFAULT : 0;
watchdog: Separate and maintain variables based on variable lifetime All variables required by the watchdog core to manage a watchdog are currently stored in struct watchdog_device. The lifetime of those variables is determined by the watchdog driver. However, the lifetime of variables used by the watchdog core differs from the lifetime of struct watchdog_device. To remedy this situation, watchdog drivers can implement ref and unref callbacks, to be used by the watchdog core to lock struct watchdog_device in memory. While this solves the immediate problem, it depends on watchdog drivers to actually implement the ref/unref callbacks. This is error prone, often not implemented in the first place, or not implemented correctly. To solve the problem without requiring driver support, split the variables in struct watchdog_device into two data structures - one for variables associated with the watchdog driver, one for variables associated with the watchdog core. With this approach, the watchdog core can keep track of its variable lifetime and no longer depends on ref/unref callbacks in the driver. As a side effect, some of the variables originally in struct watchdog_driver are now private to the watchdog core and no longer visible in watchdog drivers. As a side effect of the changes made, an ioctl will now always fail with -ENODEV after a watchdog device was unregistered with the character device still open. Previously, it would only fail with -ENODEV in some situations. Also, ioctl operations are now atomic from driver perspective. With this change, it is now guaranteed that the driver will not unregister a watchdog between a timeout change and the subsequent ping. The 'ref' and 'unref' callbacks in struct watchdog_driver are no longer used and marked as deprecated. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-12-26 08:01:42 +08:00
break;
case WDIOC_GETSTATUS:
watchdog: Separate and maintain variables based on variable lifetime All variables required by the watchdog core to manage a watchdog are currently stored in struct watchdog_device. The lifetime of those variables is determined by the watchdog driver. However, the lifetime of variables used by the watchdog core differs from the lifetime of struct watchdog_device. To remedy this situation, watchdog drivers can implement ref and unref callbacks, to be used by the watchdog core to lock struct watchdog_device in memory. While this solves the immediate problem, it depends on watchdog drivers to actually implement the ref/unref callbacks. This is error prone, often not implemented in the first place, or not implemented correctly. To solve the problem without requiring driver support, split the variables in struct watchdog_device into two data structures - one for variables associated with the watchdog driver, one for variables associated with the watchdog core. With this approach, the watchdog core can keep track of its variable lifetime and no longer depends on ref/unref callbacks in the driver. As a side effect, some of the variables originally in struct watchdog_driver are now private to the watchdog core and no longer visible in watchdog drivers. As a side effect of the changes made, an ioctl will now always fail with -ENODEV after a watchdog device was unregistered with the character device still open. Previously, it would only fail with -ENODEV in some situations. Also, ioctl operations are now atomic from driver perspective. With this change, it is now guaranteed that the driver will not unregister a watchdog between a timeout change and the subsequent ping. The 'ref' and 'unref' callbacks in struct watchdog_driver are no longer used and marked as deprecated. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-12-26 08:01:42 +08:00
val = watchdog_get_status(wdd);
err = put_user(val, p);
break;
case WDIOC_GETBOOTSTATUS:
watchdog: Separate and maintain variables based on variable lifetime All variables required by the watchdog core to manage a watchdog are currently stored in struct watchdog_device. The lifetime of those variables is determined by the watchdog driver. However, the lifetime of variables used by the watchdog core differs from the lifetime of struct watchdog_device. To remedy this situation, watchdog drivers can implement ref and unref callbacks, to be used by the watchdog core to lock struct watchdog_device in memory. While this solves the immediate problem, it depends on watchdog drivers to actually implement the ref/unref callbacks. This is error prone, often not implemented in the first place, or not implemented correctly. To solve the problem without requiring driver support, split the variables in struct watchdog_device into two data structures - one for variables associated with the watchdog driver, one for variables associated with the watchdog core. With this approach, the watchdog core can keep track of its variable lifetime and no longer depends on ref/unref callbacks in the driver. As a side effect, some of the variables originally in struct watchdog_driver are now private to the watchdog core and no longer visible in watchdog drivers. As a side effect of the changes made, an ioctl will now always fail with -ENODEV after a watchdog device was unregistered with the character device still open. Previously, it would only fail with -ENODEV in some situations. Also, ioctl operations are now atomic from driver perspective. With this change, it is now guaranteed that the driver will not unregister a watchdog between a timeout change and the subsequent ping. The 'ref' and 'unref' callbacks in struct watchdog_driver are no longer used and marked as deprecated. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-12-26 08:01:42 +08:00
err = put_user(wdd->bootstatus, p);
break;
case WDIOC_SETOPTIONS:
watchdog: Separate and maintain variables based on variable lifetime All variables required by the watchdog core to manage a watchdog are currently stored in struct watchdog_device. The lifetime of those variables is determined by the watchdog driver. However, the lifetime of variables used by the watchdog core differs from the lifetime of struct watchdog_device. To remedy this situation, watchdog drivers can implement ref and unref callbacks, to be used by the watchdog core to lock struct watchdog_device in memory. While this solves the immediate problem, it depends on watchdog drivers to actually implement the ref/unref callbacks. This is error prone, often not implemented in the first place, or not implemented correctly. To solve the problem without requiring driver support, split the variables in struct watchdog_device into two data structures - one for variables associated with the watchdog driver, one for variables associated with the watchdog core. With this approach, the watchdog core can keep track of its variable lifetime and no longer depends on ref/unref callbacks in the driver. As a side effect, some of the variables originally in struct watchdog_driver are now private to the watchdog core and no longer visible in watchdog drivers. As a side effect of the changes made, an ioctl will now always fail with -ENODEV after a watchdog device was unregistered with the character device still open. Previously, it would only fail with -ENODEV in some situations. Also, ioctl operations are now atomic from driver perspective. With this change, it is now guaranteed that the driver will not unregister a watchdog between a timeout change and the subsequent ping. The 'ref' and 'unref' callbacks in struct watchdog_driver are no longer used and marked as deprecated. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-12-26 08:01:42 +08:00
if (get_user(val, p)) {
err = -EFAULT;
break;
}
if (val & WDIOS_DISABLECARD) {
err = watchdog_stop(wdd);
if (err < 0)
watchdog: Separate and maintain variables based on variable lifetime All variables required by the watchdog core to manage a watchdog are currently stored in struct watchdog_device. The lifetime of those variables is determined by the watchdog driver. However, the lifetime of variables used by the watchdog core differs from the lifetime of struct watchdog_device. To remedy this situation, watchdog drivers can implement ref and unref callbacks, to be used by the watchdog core to lock struct watchdog_device in memory. While this solves the immediate problem, it depends on watchdog drivers to actually implement the ref/unref callbacks. This is error prone, often not implemented in the first place, or not implemented correctly. To solve the problem without requiring driver support, split the variables in struct watchdog_device into two data structures - one for variables associated with the watchdog driver, one for variables associated with the watchdog core. With this approach, the watchdog core can keep track of its variable lifetime and no longer depends on ref/unref callbacks in the driver. As a side effect, some of the variables originally in struct watchdog_driver are now private to the watchdog core and no longer visible in watchdog drivers. As a side effect of the changes made, an ioctl will now always fail with -ENODEV after a watchdog device was unregistered with the character device still open. Previously, it would only fail with -ENODEV in some situations. Also, ioctl operations are now atomic from driver perspective. With this change, it is now guaranteed that the driver will not unregister a watchdog between a timeout change and the subsequent ping. The 'ref' and 'unref' callbacks in struct watchdog_driver are no longer used and marked as deprecated. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-12-26 08:01:42 +08:00
break;
}
watchdog: Separate and maintain variables based on variable lifetime All variables required by the watchdog core to manage a watchdog are currently stored in struct watchdog_device. The lifetime of those variables is determined by the watchdog driver. However, the lifetime of variables used by the watchdog core differs from the lifetime of struct watchdog_device. To remedy this situation, watchdog drivers can implement ref and unref callbacks, to be used by the watchdog core to lock struct watchdog_device in memory. While this solves the immediate problem, it depends on watchdog drivers to actually implement the ref/unref callbacks. This is error prone, often not implemented in the first place, or not implemented correctly. To solve the problem without requiring driver support, split the variables in struct watchdog_device into two data structures - one for variables associated with the watchdog driver, one for variables associated with the watchdog core. With this approach, the watchdog core can keep track of its variable lifetime and no longer depends on ref/unref callbacks in the driver. As a side effect, some of the variables originally in struct watchdog_driver are now private to the watchdog core and no longer visible in watchdog drivers. As a side effect of the changes made, an ioctl will now always fail with -ENODEV after a watchdog device was unregistered with the character device still open. Previously, it would only fail with -ENODEV in some situations. Also, ioctl operations are now atomic from driver perspective. With this change, it is now guaranteed that the driver will not unregister a watchdog between a timeout change and the subsequent ping. The 'ref' and 'unref' callbacks in struct watchdog_driver are no longer used and marked as deprecated. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-12-26 08:01:42 +08:00
if (val & WDIOS_ENABLECARD)
err = watchdog_start(wdd);
watchdog: Separate and maintain variables based on variable lifetime All variables required by the watchdog core to manage a watchdog are currently stored in struct watchdog_device. The lifetime of those variables is determined by the watchdog driver. However, the lifetime of variables used by the watchdog core differs from the lifetime of struct watchdog_device. To remedy this situation, watchdog drivers can implement ref and unref callbacks, to be used by the watchdog core to lock struct watchdog_device in memory. While this solves the immediate problem, it depends on watchdog drivers to actually implement the ref/unref callbacks. This is error prone, often not implemented in the first place, or not implemented correctly. To solve the problem without requiring driver support, split the variables in struct watchdog_device into two data structures - one for variables associated with the watchdog driver, one for variables associated with the watchdog core. With this approach, the watchdog core can keep track of its variable lifetime and no longer depends on ref/unref callbacks in the driver. As a side effect, some of the variables originally in struct watchdog_driver are now private to the watchdog core and no longer visible in watchdog drivers. As a side effect of the changes made, an ioctl will now always fail with -ENODEV after a watchdog device was unregistered with the character device still open. Previously, it would only fail with -ENODEV in some situations. Also, ioctl operations are now atomic from driver perspective. With this change, it is now guaranteed that the driver will not unregister a watchdog between a timeout change and the subsequent ping. The 'ref' and 'unref' callbacks in struct watchdog_driver are no longer used and marked as deprecated. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-12-26 08:01:42 +08:00
break;
case WDIOC_KEEPALIVE:
watchdog: Separate and maintain variables based on variable lifetime All variables required by the watchdog core to manage a watchdog are currently stored in struct watchdog_device. The lifetime of those variables is determined by the watchdog driver. However, the lifetime of variables used by the watchdog core differs from the lifetime of struct watchdog_device. To remedy this situation, watchdog drivers can implement ref and unref callbacks, to be used by the watchdog core to lock struct watchdog_device in memory. While this solves the immediate problem, it depends on watchdog drivers to actually implement the ref/unref callbacks. This is error prone, often not implemented in the first place, or not implemented correctly. To solve the problem without requiring driver support, split the variables in struct watchdog_device into two data structures - one for variables associated with the watchdog driver, one for variables associated with the watchdog core. With this approach, the watchdog core can keep track of its variable lifetime and no longer depends on ref/unref callbacks in the driver. As a side effect, some of the variables originally in struct watchdog_driver are now private to the watchdog core and no longer visible in watchdog drivers. As a side effect of the changes made, an ioctl will now always fail with -ENODEV after a watchdog device was unregistered with the character device still open. Previously, it would only fail with -ENODEV in some situations. Also, ioctl operations are now atomic from driver perspective. With this change, it is now guaranteed that the driver will not unregister a watchdog between a timeout change and the subsequent ping. The 'ref' and 'unref' callbacks in struct watchdog_driver are no longer used and marked as deprecated. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-12-26 08:01:42 +08:00
if (!(wdd->info->options & WDIOF_KEEPALIVEPING)) {
err = -EOPNOTSUPP;
break;
}
err = watchdog_ping(wdd);
break;
case WDIOC_SETTIMEOUT:
watchdog: Separate and maintain variables based on variable lifetime All variables required by the watchdog core to manage a watchdog are currently stored in struct watchdog_device. The lifetime of those variables is determined by the watchdog driver. However, the lifetime of variables used by the watchdog core differs from the lifetime of struct watchdog_device. To remedy this situation, watchdog drivers can implement ref and unref callbacks, to be used by the watchdog core to lock struct watchdog_device in memory. While this solves the immediate problem, it depends on watchdog drivers to actually implement the ref/unref callbacks. This is error prone, often not implemented in the first place, or not implemented correctly. To solve the problem without requiring driver support, split the variables in struct watchdog_device into two data structures - one for variables associated with the watchdog driver, one for variables associated with the watchdog core. With this approach, the watchdog core can keep track of its variable lifetime and no longer depends on ref/unref callbacks in the driver. As a side effect, some of the variables originally in struct watchdog_driver are now private to the watchdog core and no longer visible in watchdog drivers. As a side effect of the changes made, an ioctl will now always fail with -ENODEV after a watchdog device was unregistered with the character device still open. Previously, it would only fail with -ENODEV in some situations. Also, ioctl operations are now atomic from driver perspective. With this change, it is now guaranteed that the driver will not unregister a watchdog between a timeout change and the subsequent ping. The 'ref' and 'unref' callbacks in struct watchdog_driver are no longer used and marked as deprecated. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-12-26 08:01:42 +08:00
if (get_user(val, p)) {
err = -EFAULT;
break;
}
err = watchdog_set_timeout(wdd, val);
if (err < 0)
watchdog: Separate and maintain variables based on variable lifetime All variables required by the watchdog core to manage a watchdog are currently stored in struct watchdog_device. The lifetime of those variables is determined by the watchdog driver. However, the lifetime of variables used by the watchdog core differs from the lifetime of struct watchdog_device. To remedy this situation, watchdog drivers can implement ref and unref callbacks, to be used by the watchdog core to lock struct watchdog_device in memory. While this solves the immediate problem, it depends on watchdog drivers to actually implement the ref/unref callbacks. This is error prone, often not implemented in the first place, or not implemented correctly. To solve the problem without requiring driver support, split the variables in struct watchdog_device into two data structures - one for variables associated with the watchdog driver, one for variables associated with the watchdog core. With this approach, the watchdog core can keep track of its variable lifetime and no longer depends on ref/unref callbacks in the driver. As a side effect, some of the variables originally in struct watchdog_driver are now private to the watchdog core and no longer visible in watchdog drivers. As a side effect of the changes made, an ioctl will now always fail with -ENODEV after a watchdog device was unregistered with the character device still open. Previously, it would only fail with -ENODEV in some situations. Also, ioctl operations are now atomic from driver perspective. With this change, it is now guaranteed that the driver will not unregister a watchdog between a timeout change and the subsequent ping. The 'ref' and 'unref' callbacks in struct watchdog_driver are no longer used and marked as deprecated. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-12-26 08:01:42 +08:00
break;
/* If the watchdog is active then we send a keepalive ping
* to make sure that the watchdog keep's running (and if
* possible that it takes the new timeout) */
err = watchdog_ping(wdd);
if (err < 0)
watchdog: Separate and maintain variables based on variable lifetime All variables required by the watchdog core to manage a watchdog are currently stored in struct watchdog_device. The lifetime of those variables is determined by the watchdog driver. However, the lifetime of variables used by the watchdog core differs from the lifetime of struct watchdog_device. To remedy this situation, watchdog drivers can implement ref and unref callbacks, to be used by the watchdog core to lock struct watchdog_device in memory. While this solves the immediate problem, it depends on watchdog drivers to actually implement the ref/unref callbacks. This is error prone, often not implemented in the first place, or not implemented correctly. To solve the problem without requiring driver support, split the variables in struct watchdog_device into two data structures - one for variables associated with the watchdog driver, one for variables associated with the watchdog core. With this approach, the watchdog core can keep track of its variable lifetime and no longer depends on ref/unref callbacks in the driver. As a side effect, some of the variables originally in struct watchdog_driver are now private to the watchdog core and no longer visible in watchdog drivers. As a side effect of the changes made, an ioctl will now always fail with -ENODEV after a watchdog device was unregistered with the character device still open. Previously, it would only fail with -ENODEV in some situations. Also, ioctl operations are now atomic from driver perspective. With this change, it is now guaranteed that the driver will not unregister a watchdog between a timeout change and the subsequent ping. The 'ref' and 'unref' callbacks in struct watchdog_driver are no longer used and marked as deprecated. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-12-26 08:01:42 +08:00
break;
fallthrough;
case WDIOC_GETTIMEOUT:
/* timeout == 0 means that we don't know the timeout */
watchdog: Separate and maintain variables based on variable lifetime All variables required by the watchdog core to manage a watchdog are currently stored in struct watchdog_device. The lifetime of those variables is determined by the watchdog driver. However, the lifetime of variables used by the watchdog core differs from the lifetime of struct watchdog_device. To remedy this situation, watchdog drivers can implement ref and unref callbacks, to be used by the watchdog core to lock struct watchdog_device in memory. While this solves the immediate problem, it depends on watchdog drivers to actually implement the ref/unref callbacks. This is error prone, often not implemented in the first place, or not implemented correctly. To solve the problem without requiring driver support, split the variables in struct watchdog_device into two data structures - one for variables associated with the watchdog driver, one for variables associated with the watchdog core. With this approach, the watchdog core can keep track of its variable lifetime and no longer depends on ref/unref callbacks in the driver. As a side effect, some of the variables originally in struct watchdog_driver are now private to the watchdog core and no longer visible in watchdog drivers. As a side effect of the changes made, an ioctl will now always fail with -ENODEV after a watchdog device was unregistered with the character device still open. Previously, it would only fail with -ENODEV in some situations. Also, ioctl operations are now atomic from driver perspective. With this change, it is now guaranteed that the driver will not unregister a watchdog between a timeout change and the subsequent ping. The 'ref' and 'unref' callbacks in struct watchdog_driver are no longer used and marked as deprecated. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-12-26 08:01:42 +08:00
if (wdd->timeout == 0) {
err = -EOPNOTSUPP;
break;
}
err = put_user(wdd->timeout, p);
break;
case WDIOC_GETTIMELEFT:
err = watchdog_get_timeleft(wdd, &val);
watchdog: Separate and maintain variables based on variable lifetime All variables required by the watchdog core to manage a watchdog are currently stored in struct watchdog_device. The lifetime of those variables is determined by the watchdog driver. However, the lifetime of variables used by the watchdog core differs from the lifetime of struct watchdog_device. To remedy this situation, watchdog drivers can implement ref and unref callbacks, to be used by the watchdog core to lock struct watchdog_device in memory. While this solves the immediate problem, it depends on watchdog drivers to actually implement the ref/unref callbacks. This is error prone, often not implemented in the first place, or not implemented correctly. To solve the problem without requiring driver support, split the variables in struct watchdog_device into two data structures - one for variables associated with the watchdog driver, one for variables associated with the watchdog core. With this approach, the watchdog core can keep track of its variable lifetime and no longer depends on ref/unref callbacks in the driver. As a side effect, some of the variables originally in struct watchdog_driver are now private to the watchdog core and no longer visible in watchdog drivers. As a side effect of the changes made, an ioctl will now always fail with -ENODEV after a watchdog device was unregistered with the character device still open. Previously, it would only fail with -ENODEV in some situations. Also, ioctl operations are now atomic from driver perspective. With this change, it is now guaranteed that the driver will not unregister a watchdog between a timeout change and the subsequent ping. The 'ref' and 'unref' callbacks in struct watchdog_driver are no longer used and marked as deprecated. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-12-26 08:01:42 +08:00
if (err < 0)
break;
err = put_user(val, p);
break;
case WDIOC_SETPRETIMEOUT:
if (get_user(val, p)) {
err = -EFAULT;
break;
}
err = watchdog_set_pretimeout(wdd, val);
break;
case WDIOC_GETPRETIMEOUT:
err = put_user(wdd->pretimeout, p);
break;
default:
watchdog: Separate and maintain variables based on variable lifetime All variables required by the watchdog core to manage a watchdog are currently stored in struct watchdog_device. The lifetime of those variables is determined by the watchdog driver. However, the lifetime of variables used by the watchdog core differs from the lifetime of struct watchdog_device. To remedy this situation, watchdog drivers can implement ref and unref callbacks, to be used by the watchdog core to lock struct watchdog_device in memory. While this solves the immediate problem, it depends on watchdog drivers to actually implement the ref/unref callbacks. This is error prone, often not implemented in the first place, or not implemented correctly. To solve the problem without requiring driver support, split the variables in struct watchdog_device into two data structures - one for variables associated with the watchdog driver, one for variables associated with the watchdog core. With this approach, the watchdog core can keep track of its variable lifetime and no longer depends on ref/unref callbacks in the driver. As a side effect, some of the variables originally in struct watchdog_driver are now private to the watchdog core and no longer visible in watchdog drivers. As a side effect of the changes made, an ioctl will now always fail with -ENODEV after a watchdog device was unregistered with the character device still open. Previously, it would only fail with -ENODEV in some situations. Also, ioctl operations are now atomic from driver perspective. With this change, it is now guaranteed that the driver will not unregister a watchdog between a timeout change and the subsequent ping. The 'ref' and 'unref' callbacks in struct watchdog_driver are no longer used and marked as deprecated. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-12-26 08:01:42 +08:00
err = -ENOTTY;
break;
}
watchdog: Separate and maintain variables based on variable lifetime All variables required by the watchdog core to manage a watchdog are currently stored in struct watchdog_device. The lifetime of those variables is determined by the watchdog driver. However, the lifetime of variables used by the watchdog core differs from the lifetime of struct watchdog_device. To remedy this situation, watchdog drivers can implement ref and unref callbacks, to be used by the watchdog core to lock struct watchdog_device in memory. While this solves the immediate problem, it depends on watchdog drivers to actually implement the ref/unref callbacks. This is error prone, often not implemented in the first place, or not implemented correctly. To solve the problem without requiring driver support, split the variables in struct watchdog_device into two data structures - one for variables associated with the watchdog driver, one for variables associated with the watchdog core. With this approach, the watchdog core can keep track of its variable lifetime and no longer depends on ref/unref callbacks in the driver. As a side effect, some of the variables originally in struct watchdog_driver are now private to the watchdog core and no longer visible in watchdog drivers. As a side effect of the changes made, an ioctl will now always fail with -ENODEV after a watchdog device was unregistered with the character device still open. Previously, it would only fail with -ENODEV in some situations. Also, ioctl operations are now atomic from driver perspective. With this change, it is now guaranteed that the driver will not unregister a watchdog between a timeout change and the subsequent ping. The 'ref' and 'unref' callbacks in struct watchdog_driver are no longer used and marked as deprecated. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-12-26 08:01:42 +08:00
out_ioctl:
mutex_unlock(&wd_data->lock);
return err;
}
/*
* watchdog_open: open the /dev/watchdog* devices.
* @inode: inode of device
* @file: file handle to device
*
* When the /dev/watchdog* device gets opened, we start the watchdog.
* Watch out: the /dev/watchdog device is single open, so we make sure
* it can only be opened once.
*/
static int watchdog_open(struct inode *inode, struct file *file)
{
watchdog: Separate and maintain variables based on variable lifetime All variables required by the watchdog core to manage a watchdog are currently stored in struct watchdog_device. The lifetime of those variables is determined by the watchdog driver. However, the lifetime of variables used by the watchdog core differs from the lifetime of struct watchdog_device. To remedy this situation, watchdog drivers can implement ref and unref callbacks, to be used by the watchdog core to lock struct watchdog_device in memory. While this solves the immediate problem, it depends on watchdog drivers to actually implement the ref/unref callbacks. This is error prone, often not implemented in the first place, or not implemented correctly. To solve the problem without requiring driver support, split the variables in struct watchdog_device into two data structures - one for variables associated with the watchdog driver, one for variables associated with the watchdog core. With this approach, the watchdog core can keep track of its variable lifetime and no longer depends on ref/unref callbacks in the driver. As a side effect, some of the variables originally in struct watchdog_driver are now private to the watchdog core and no longer visible in watchdog drivers. As a side effect of the changes made, an ioctl will now always fail with -ENODEV after a watchdog device was unregistered with the character device still open. Previously, it would only fail with -ENODEV in some situations. Also, ioctl operations are now atomic from driver perspective. With this change, it is now guaranteed that the driver will not unregister a watchdog between a timeout change and the subsequent ping. The 'ref' and 'unref' callbacks in struct watchdog_driver are no longer used and marked as deprecated. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-12-26 08:01:42 +08:00
struct watchdog_core_data *wd_data;
struct watchdog_device *wdd;
bool hw_running;
watchdog: Separate and maintain variables based on variable lifetime All variables required by the watchdog core to manage a watchdog are currently stored in struct watchdog_device. The lifetime of those variables is determined by the watchdog driver. However, the lifetime of variables used by the watchdog core differs from the lifetime of struct watchdog_device. To remedy this situation, watchdog drivers can implement ref and unref callbacks, to be used by the watchdog core to lock struct watchdog_device in memory. While this solves the immediate problem, it depends on watchdog drivers to actually implement the ref/unref callbacks. This is error prone, often not implemented in the first place, or not implemented correctly. To solve the problem without requiring driver support, split the variables in struct watchdog_device into two data structures - one for variables associated with the watchdog driver, one for variables associated with the watchdog core. With this approach, the watchdog core can keep track of its variable lifetime and no longer depends on ref/unref callbacks in the driver. As a side effect, some of the variables originally in struct watchdog_driver are now private to the watchdog core and no longer visible in watchdog drivers. As a side effect of the changes made, an ioctl will now always fail with -ENODEV after a watchdog device was unregistered with the character device still open. Previously, it would only fail with -ENODEV in some situations. Also, ioctl operations are now atomic from driver perspective. With this change, it is now guaranteed that the driver will not unregister a watchdog between a timeout change and the subsequent ping. The 'ref' and 'unref' callbacks in struct watchdog_driver are no longer used and marked as deprecated. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-12-26 08:01:42 +08:00
int err;
/* Get the corresponding watchdog device */
if (imajor(inode) == MISC_MAJOR)
watchdog: Separate and maintain variables based on variable lifetime All variables required by the watchdog core to manage a watchdog are currently stored in struct watchdog_device. The lifetime of those variables is determined by the watchdog driver. However, the lifetime of variables used by the watchdog core differs from the lifetime of struct watchdog_device. To remedy this situation, watchdog drivers can implement ref and unref callbacks, to be used by the watchdog core to lock struct watchdog_device in memory. While this solves the immediate problem, it depends on watchdog drivers to actually implement the ref/unref callbacks. This is error prone, often not implemented in the first place, or not implemented correctly. To solve the problem without requiring driver support, split the variables in struct watchdog_device into two data structures - one for variables associated with the watchdog driver, one for variables associated with the watchdog core. With this approach, the watchdog core can keep track of its variable lifetime and no longer depends on ref/unref callbacks in the driver. As a side effect, some of the variables originally in struct watchdog_driver are now private to the watchdog core and no longer visible in watchdog drivers. As a side effect of the changes made, an ioctl will now always fail with -ENODEV after a watchdog device was unregistered with the character device still open. Previously, it would only fail with -ENODEV in some situations. Also, ioctl operations are now atomic from driver perspective. With this change, it is now guaranteed that the driver will not unregister a watchdog between a timeout change and the subsequent ping. The 'ref' and 'unref' callbacks in struct watchdog_driver are no longer used and marked as deprecated. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-12-26 08:01:42 +08:00
wd_data = old_wd_data;
else
watchdog: Separate and maintain variables based on variable lifetime All variables required by the watchdog core to manage a watchdog are currently stored in struct watchdog_device. The lifetime of those variables is determined by the watchdog driver. However, the lifetime of variables used by the watchdog core differs from the lifetime of struct watchdog_device. To remedy this situation, watchdog drivers can implement ref and unref callbacks, to be used by the watchdog core to lock struct watchdog_device in memory. While this solves the immediate problem, it depends on watchdog drivers to actually implement the ref/unref callbacks. This is error prone, often not implemented in the first place, or not implemented correctly. To solve the problem without requiring driver support, split the variables in struct watchdog_device into two data structures - one for variables associated with the watchdog driver, one for variables associated with the watchdog core. With this approach, the watchdog core can keep track of its variable lifetime and no longer depends on ref/unref callbacks in the driver. As a side effect, some of the variables originally in struct watchdog_driver are now private to the watchdog core and no longer visible in watchdog drivers. As a side effect of the changes made, an ioctl will now always fail with -ENODEV after a watchdog device was unregistered with the character device still open. Previously, it would only fail with -ENODEV in some situations. Also, ioctl operations are now atomic from driver perspective. With this change, it is now guaranteed that the driver will not unregister a watchdog between a timeout change and the subsequent ping. The 'ref' and 'unref' callbacks in struct watchdog_driver are no longer used and marked as deprecated. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-12-26 08:01:42 +08:00
wd_data = container_of(inode->i_cdev, struct watchdog_core_data,
cdev);
/* the watchdog is single open! */
watchdog: Separate and maintain variables based on variable lifetime All variables required by the watchdog core to manage a watchdog are currently stored in struct watchdog_device. The lifetime of those variables is determined by the watchdog driver. However, the lifetime of variables used by the watchdog core differs from the lifetime of struct watchdog_device. To remedy this situation, watchdog drivers can implement ref and unref callbacks, to be used by the watchdog core to lock struct watchdog_device in memory. While this solves the immediate problem, it depends on watchdog drivers to actually implement the ref/unref callbacks. This is error prone, often not implemented in the first place, or not implemented correctly. To solve the problem without requiring driver support, split the variables in struct watchdog_device into two data structures - one for variables associated with the watchdog driver, one for variables associated with the watchdog core. With this approach, the watchdog core can keep track of its variable lifetime and no longer depends on ref/unref callbacks in the driver. As a side effect, some of the variables originally in struct watchdog_driver are now private to the watchdog core and no longer visible in watchdog drivers. As a side effect of the changes made, an ioctl will now always fail with -ENODEV after a watchdog device was unregistered with the character device still open. Previously, it would only fail with -ENODEV in some situations. Also, ioctl operations are now atomic from driver perspective. With this change, it is now guaranteed that the driver will not unregister a watchdog between a timeout change and the subsequent ping. The 'ref' and 'unref' callbacks in struct watchdog_driver are no longer used and marked as deprecated. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-12-26 08:01:42 +08:00
if (test_and_set_bit(_WDOG_DEV_OPEN, &wd_data->status))
return -EBUSY;
watchdog: Separate and maintain variables based on variable lifetime All variables required by the watchdog core to manage a watchdog are currently stored in struct watchdog_device. The lifetime of those variables is determined by the watchdog driver. However, the lifetime of variables used by the watchdog core differs from the lifetime of struct watchdog_device. To remedy this situation, watchdog drivers can implement ref and unref callbacks, to be used by the watchdog core to lock struct watchdog_device in memory. While this solves the immediate problem, it depends on watchdog drivers to actually implement the ref/unref callbacks. This is error prone, often not implemented in the first place, or not implemented correctly. To solve the problem without requiring driver support, split the variables in struct watchdog_device into two data structures - one for variables associated with the watchdog driver, one for variables associated with the watchdog core. With this approach, the watchdog core can keep track of its variable lifetime and no longer depends on ref/unref callbacks in the driver. As a side effect, some of the variables originally in struct watchdog_driver are now private to the watchdog core and no longer visible in watchdog drivers. As a side effect of the changes made, an ioctl will now always fail with -ENODEV after a watchdog device was unregistered with the character device still open. Previously, it would only fail with -ENODEV in some situations. Also, ioctl operations are now atomic from driver perspective. With this change, it is now guaranteed that the driver will not unregister a watchdog between a timeout change and the subsequent ping. The 'ref' and 'unref' callbacks in struct watchdog_driver are no longer used and marked as deprecated. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-12-26 08:01:42 +08:00
wdd = wd_data->wdd;
/*
* If the /dev/watchdog device is open, we don't want the module
* to be unloaded.
*/
hw_running = watchdog_hw_running(wdd);
if (!hw_running && !try_module_get(wdd->ops->owner)) {
watchdog: Separate and maintain variables based on variable lifetime All variables required by the watchdog core to manage a watchdog are currently stored in struct watchdog_device. The lifetime of those variables is determined by the watchdog driver. However, the lifetime of variables used by the watchdog core differs from the lifetime of struct watchdog_device. To remedy this situation, watchdog drivers can implement ref and unref callbacks, to be used by the watchdog core to lock struct watchdog_device in memory. While this solves the immediate problem, it depends on watchdog drivers to actually implement the ref/unref callbacks. This is error prone, often not implemented in the first place, or not implemented correctly. To solve the problem without requiring driver support, split the variables in struct watchdog_device into two data structures - one for variables associated with the watchdog driver, one for variables associated with the watchdog core. With this approach, the watchdog core can keep track of its variable lifetime and no longer depends on ref/unref callbacks in the driver. As a side effect, some of the variables originally in struct watchdog_driver are now private to the watchdog core and no longer visible in watchdog drivers. As a side effect of the changes made, an ioctl will now always fail with -ENODEV after a watchdog device was unregistered with the character device still open. Previously, it would only fail with -ENODEV in some situations. Also, ioctl operations are now atomic from driver perspective. With this change, it is now guaranteed that the driver will not unregister a watchdog between a timeout change and the subsequent ping. The 'ref' and 'unref' callbacks in struct watchdog_driver are no longer used and marked as deprecated. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-12-26 08:01:42 +08:00
err = -EBUSY;
goto out_clear;
}
err = watchdog_start(wdd);
if (err < 0)
goto out_mod;
watchdog: Separate and maintain variables based on variable lifetime All variables required by the watchdog core to manage a watchdog are currently stored in struct watchdog_device. The lifetime of those variables is determined by the watchdog driver. However, the lifetime of variables used by the watchdog core differs from the lifetime of struct watchdog_device. To remedy this situation, watchdog drivers can implement ref and unref callbacks, to be used by the watchdog core to lock struct watchdog_device in memory. While this solves the immediate problem, it depends on watchdog drivers to actually implement the ref/unref callbacks. This is error prone, often not implemented in the first place, or not implemented correctly. To solve the problem without requiring driver support, split the variables in struct watchdog_device into two data structures - one for variables associated with the watchdog driver, one for variables associated with the watchdog core. With this approach, the watchdog core can keep track of its variable lifetime and no longer depends on ref/unref callbacks in the driver. As a side effect, some of the variables originally in struct watchdog_driver are now private to the watchdog core and no longer visible in watchdog drivers. As a side effect of the changes made, an ioctl will now always fail with -ENODEV after a watchdog device was unregistered with the character device still open. Previously, it would only fail with -ENODEV in some situations. Also, ioctl operations are now atomic from driver perspective. With this change, it is now guaranteed that the driver will not unregister a watchdog between a timeout change and the subsequent ping. The 'ref' and 'unref' callbacks in struct watchdog_driver are no longer used and marked as deprecated. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-12-26 08:01:42 +08:00
file->private_data = wd_data;
if (!hw_running)
watchdog: Fix the race between the release of watchdog_core_data and cdev The struct cdev is embedded in the struct watchdog_core_data. In the current code, we manage the watchdog_core_data with a kref, but the cdev is manged by a kobject. There is no any relationship between this kref and kobject. So it is possible that the watchdog_core_data is freed before the cdev is entirely released. We can easily get the following call trace with CONFIG_DEBUG_KOBJECT_RELEASE and CONFIG_DEBUG_OBJECTS_TIMERS enabled. ODEBUG: free active (active state 0) object type: timer_list hint: delayed_work_timer_fn+0x0/0x38 WARNING: CPU: 23 PID: 1028 at lib/debugobjects.c:481 debug_print_object+0xb0/0xf0 Modules linked in: softdog(-) deflate ctr twofish_generic twofish_common camellia_generic serpent_generic blowfish_generic blowfish_common cast5_generic cast_common cmac xcbc af_key sch_fq_codel openvswitch nsh nf_conncount nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 CPU: 23 PID: 1028 Comm: modprobe Not tainted 5.3.0-next-20190924-yoctodev-standard+ #180 Hardware name: Marvell OcteonTX CN96XX board (DT) pstate: 00400009 (nzcv daif +PAN -UAO) pc : debug_print_object+0xb0/0xf0 lr : debug_print_object+0xb0/0xf0 sp : ffff80001cbcfc70 x29: ffff80001cbcfc70 x28: ffff800010ea2128 x27: ffff800010bad000 x26: 0000000000000000 x25: ffff80001103c640 x24: ffff80001107b268 x23: ffff800010bad9e8 x22: ffff800010ea2128 x21: ffff000bc2c62af8 x20: ffff80001103c600 x19: ffff800010e867d8 x18: 0000000000000060 x17: 0000000000000000 x16: 0000000000000000 x15: ffff000bd7240470 x14: 6e6968207473696c x13: 5f72656d6974203a x12: 6570797420746365 x11: 6a626f2029302065 x10: 7461747320657669 x9 : 7463612820657669 x8 : 3378302f3078302b x7 : 0000000000001d7a x6 : ffff800010fd5889 x5 : 0000000000000000 x4 : 0000000000000000 x3 : 0000000000000000 x2 : ffff000bff948548 x1 : 276a1c9e1edc2300 x0 : 0000000000000000 Call trace: debug_print_object+0xb0/0xf0 debug_check_no_obj_freed+0x1e8/0x210 kfree+0x1b8/0x368 watchdog_cdev_unregister+0x88/0xc8 watchdog_dev_unregister+0x38/0x48 watchdog_unregister_device+0xa8/0x100 softdog_exit+0x18/0xfec4 [softdog] __arm64_sys_delete_module+0x174/0x200 el0_svc_handler+0xd0/0x1c8 el0_svc+0x8/0xc This is a common issue when using cdev embedded in a struct. Fortunately, we already have a mechanism to solve this kind of issue. Please see commit 233ed09d7fda ("chardev: add helper function to register char devs with a struct device") for more detail. In this patch, we choose to embed the struct device into the watchdog_core_data, and use the API provided by the commit 233ed09d7fda to make sure that the release of watchdog_core_data and cdev are in sequence. Signed-off-by: Kevin Hao <haokexin@gmail.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20191008112934.29669-1-haokexin@gmail.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-10-08 19:29:34 +08:00
get_device(&wd_data->dev);
watchdog: introduce watchdog.open_timeout commandline parameter The watchdog framework takes care of feeding a hardware watchdog until userspace opens /dev/watchdogN. If that never happens for some reason (buggy init script, corrupt root filesystem or whatnot) but the kernel itself is fine, the machine stays up indefinitely. This patch allows setting an upper limit for how long the kernel will take care of the watchdog, thus ensuring that the watchdog will eventually reset the machine. A value of 0 (the default) means infinite timeout, preserving the current behaviour. This is particularly useful for embedded devices where some fallback logic is implemented in the bootloader (e.g., use a different root partition, boot from network, ...). There is already handle_boot_enabled serving a similar purpose. However, such a binary choice is unsuitable if the hardware watchdog cannot be programmed by the bootloader to provide a timeout long enough for userspace to get up and running. Many of the embedded devices we see use external (gpio-triggered) watchdogs with a fixed timeout of the order of 1-2 seconds. The open timeout only applies for the first open from userspace. Should userspace need to close the watchdog device, with the intention of re-opening it shortly, the application can emulate the open timeout feature by combining the nowayout feature with an appropriate WDIOC_SETTIMEOUT immediately prior to closing the device. Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-06-05 22:06:41 +08:00
/*
* open_timeout only applies for the first open from
* userspace. Set open_deadline to infinity so that the kernel
* will take care of an always-running hardware watchdog in
* case the device gets magic-closed or WDIOS_DISABLECARD is
* applied.
*/
wd_data->open_deadline = KTIME_MAX;
/* dev/watchdog is a virtual (and thus non-seekable) filesystem */
*: convert stream-like files from nonseekable_open -> stream_open Using scripts/coccinelle/api/stream_open.cocci added in 10dce8af3422 ("fs: stream_open - opener for stream-like files so that read and write can run simultaneously without deadlock"), search and convert to stream_open all in-kernel nonseekable_open users for which read and write actually do not depend on ppos and where there is no other methods in file_operations which assume @offset access. I've verified each generated change manually - that it is correct to convert - and each other nonseekable_open instance left - that it is either not correct to convert there, or that it is not converted due to current stream_open.cocci limitations. The script also does not convert files that should be valid to convert, but that currently have .llseek = noop_llseek or generic_file_llseek for unknown reason despite file being opened with nonseekable_open (e.g. drivers/input/mousedev.c) Among cases converted 14 were potentially vulnerable to read vs write deadlock (see details in 10dce8af3422): drivers/char/pcmcia/cm4000_cs.c:1685:7-23: ERROR: cm4000_fops: .read() can deadlock .write(); change nonseekable_open -> stream_open to fix. drivers/gnss/core.c:45:1-17: ERROR: gnss_fops: .read() can deadlock .write(); change nonseekable_open -> stream_open to fix. drivers/hid/uhid.c:635:1-17: ERROR: uhid_fops: .read() can deadlock .write(); change nonseekable_open -> stream_open to fix. drivers/infiniband/core/user_mad.c:988:1-17: ERROR: umad_fops: .read() can deadlock .write(); change nonseekable_open -> stream_open to fix. drivers/input/evdev.c:527:1-17: ERROR: evdev_fops: .read() can deadlock .write(); change nonseekable_open -> stream_open to fix. drivers/input/misc/uinput.c:401:1-17: ERROR: uinput_fops: .read() can deadlock .write(); change nonseekable_open -> stream_open to fix. drivers/isdn/capi/capi.c:963:8-24: ERROR: capi_fops: .read() can deadlock .write(); change nonseekable_open -> stream_open to fix. drivers/leds/uleds.c:77:1-17: ERROR: uleds_fops: .read() can deadlock .write(); change nonseekable_open -> stream_open to fix. drivers/media/rc/lirc_dev.c:198:1-17: ERROR: lirc_fops: .read() can deadlock .write(); change nonseekable_open -> stream_open to fix. drivers/s390/char/fs3270.c:488:1-17: ERROR: fs3270_fops: .read() can deadlock .write(); change nonseekable_open -> stream_open to fix. drivers/usb/misc/ldusb.c:310:1-17: ERROR: ld_usb_fops: .read() can deadlock .write(); change nonseekable_open -> stream_open to fix. drivers/xen/evtchn.c:667:8-24: ERROR: evtchn_fops: .read() can deadlock .write(); change nonseekable_open -> stream_open to fix. net/batman-adv/icmp_socket.c:80:1-17: ERROR: batadv_fops: .read() can deadlock .write(); change nonseekable_open -> stream_open to fix. net/rfkill/core.c:1146:8-24: ERROR: rfkill_fops: .read() can deadlock .write(); change nonseekable_open -> stream_open to fix. and the rest were just safe to convert to stream_open because their read and write do not use ppos at all and corresponding file_operations do not have methods that assume @offset file access(*): arch/powerpc/platforms/52xx/mpc52xx_gpt.c:631:8-24: WARNING: mpc52xx_wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. arch/powerpc/platforms/cell/spufs/file.c:591:8-24: WARNING: spufs_ibox_fops: .read() has stream semantic; safe to change nonseekable_open -> stream_open. arch/powerpc/platforms/cell/spufs/file.c:591:8-24: WARNING: spufs_ibox_stat_fops: .read() has stream semantic; safe to change nonseekable_open -> stream_open. arch/powerpc/platforms/cell/spufs/file.c:591:8-24: WARNING: spufs_mbox_fops: .read() has stream semantic; safe to change nonseekable_open -> stream_open. arch/powerpc/platforms/cell/spufs/file.c:591:8-24: WARNING: spufs_mbox_stat_fops: .read() has stream semantic; safe to change nonseekable_open -> stream_open. arch/powerpc/platforms/cell/spufs/file.c:591:8-24: WARNING: spufs_wbox_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. arch/powerpc/platforms/cell/spufs/file.c:591:8-24: WARNING: spufs_wbox_stat_fops: .read() has stream semantic; safe to change nonseekable_open -> stream_open. arch/um/drivers/harddog_kern.c:88:8-24: WARNING: harddog_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. arch/x86/kernel/cpu/microcode/core.c:430:33-49: WARNING: microcode_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/char/ds1620.c:215:8-24: WARNING: ds1620_fops: .read() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/char/dtlk.c:301:1-17: WARNING: dtlk_fops: .read() and .write() have stream semantic; safe to change nonseekable_open -> stream_open. drivers/char/ipmi/ipmi_watchdog.c:840:9-25: WARNING: ipmi_wdog_fops: .read() and .write() have stream semantic; safe to change nonseekable_open -> stream_open. drivers/char/pcmcia/scr24x_cs.c:95:8-24: WARNING: scr24x_fops: .read() and .write() have stream semantic; safe to change nonseekable_open -> stream_open. drivers/char/tb0219.c:246:9-25: WARNING: tb0219_fops: .read() and .write() have stream semantic; safe to change nonseekable_open -> stream_open. drivers/firewire/nosy.c:306:8-24: WARNING: nosy_ops: .read() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/hwmon/fschmd.c:840:8-24: WARNING: watchdog_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/hwmon/w83793.c:1344:8-24: WARNING: watchdog_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/infiniband/core/ucma.c:1747:8-24: WARNING: ucma_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/infiniband/core/ucm.c:1178:8-24: WARNING: ucm_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/infiniband/core/uverbs_main.c:1086:8-24: WARNING: uverbs_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/input/joydev.c:282:1-17: WARNING: joydev_fops: .read() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/pci/switch/switchtec.c:393:1-17: WARNING: switchtec_fops: .read() and .write() have stream semantic; safe to change nonseekable_open -> stream_open. drivers/platform/chrome/cros_ec_debugfs.c:135:8-24: WARNING: cros_ec_console_log_fops: .read() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/rtc/rtc-ds1374.c:470:9-25: WARNING: ds1374_wdt_fops: .read() and .write() have stream semantic; safe to change nonseekable_open -> stream_open. drivers/rtc/rtc-m41t80.c:805:9-25: WARNING: wdt_fops: .read() and .write() have stream semantic; safe to change nonseekable_open -> stream_open. drivers/s390/char/tape_char.c:293:2-18: WARNING: tape_fops: .read() and .write() have stream semantic; safe to change nonseekable_open -> stream_open. drivers/s390/char/zcore.c:194:8-24: WARNING: zcore_reipl_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/s390/crypto/zcrypt_api.c:528:8-24: WARNING: zcrypt_fops: .read() and .write() have stream semantic; safe to change nonseekable_open -> stream_open. drivers/spi/spidev.c:594:1-17: WARNING: spidev_fops: .read() and .write() have stream semantic; safe to change nonseekable_open -> stream_open. drivers/staging/pi433/pi433_if.c:974:1-17: WARNING: pi433_fops: .read() and .write() have stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/acquirewdt.c:203:8-24: WARNING: acq_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/advantechwdt.c:202:8-24: WARNING: advwdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/alim1535_wdt.c:252:8-24: WARNING: ali_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/alim7101_wdt.c:217:8-24: WARNING: wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/ar7_wdt.c:166:8-24: WARNING: ar7_wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/at91rm9200_wdt.c:113:8-24: WARNING: at91wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/ath79_wdt.c:135:8-24: WARNING: ath79_wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/bcm63xx_wdt.c:119:8-24: WARNING: bcm63xx_wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/cpu5wdt.c:143:8-24: WARNING: cpu5wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/cpwd.c:397:8-24: WARNING: cpwd_fops: .read() and .write() have stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/eurotechwdt.c:319:8-24: WARNING: eurwdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/f71808e_wdt.c:528:8-24: WARNING: watchdog_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/gef_wdt.c:232:8-24: WARNING: gef_wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/geodewdt.c:95:8-24: WARNING: geodewdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/ib700wdt.c:241:8-24: WARNING: ibwdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/ibmasr.c:326:8-24: WARNING: asr_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/indydog.c:80:8-24: WARNING: indydog_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/intel_scu_watchdog.c:307:8-24: WARNING: intel_scu_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/iop_wdt.c:104:8-24: WARNING: iop_wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/it8712f_wdt.c:330:8-24: WARNING: it8712f_wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/ixp4xx_wdt.c:68:8-24: WARNING: ixp4xx_wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/ks8695_wdt.c:145:8-24: WARNING: ks8695wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/m54xx_wdt.c:88:8-24: WARNING: m54xx_wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/machzwd.c:336:8-24: WARNING: zf_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/mixcomwd.c:153:8-24: WARNING: mixcomwd_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/mtx-1_wdt.c:121:8-24: WARNING: mtx1_wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/mv64x60_wdt.c:136:8-24: WARNING: mv64x60_wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/nuc900_wdt.c:134:8-24: WARNING: nuc900wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/nv_tco.c:164:8-24: WARNING: nv_tco_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/pc87413_wdt.c:289:8-24: WARNING: pc87413_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/pcwd.c:698:8-24: WARNING: pcwd_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/pcwd.c:737:8-24: WARNING: pcwd_temp_fops: .read() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/pcwd_pci.c:581:8-24: WARNING: pcipcwd_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/pcwd_pci.c:623:8-24: WARNING: pcipcwd_temp_fops: .read() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/pcwd_usb.c:488:8-24: WARNING: usb_pcwd_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/pcwd_usb.c:527:8-24: WARNING: usb_pcwd_temperature_fops: .read() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/pika_wdt.c:121:8-24: WARNING: pikawdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/pnx833x_wdt.c:119:8-24: WARNING: pnx833x_wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/rc32434_wdt.c:153:8-24: WARNING: rc32434_wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/rdc321x_wdt.c:145:8-24: WARNING: rdc321x_wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/riowd.c:79:1-17: WARNING: riowd_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/sa1100_wdt.c:62:8-24: WARNING: sa1100dog_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/sbc60xxwdt.c:211:8-24: WARNING: wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/sbc7240_wdt.c:139:8-24: WARNING: wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/sbc8360.c:274:8-24: WARNING: sbc8360_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/sbc_epx_c3.c:81:8-24: WARNING: epx_c3_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/sbc_fitpc2_wdt.c:78:8-24: WARNING: fitpc2_wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/sb_wdog.c:108:1-17: WARNING: sbwdog_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/sc1200wdt.c:181:8-24: WARNING: sc1200wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/sc520_wdt.c:261:8-24: WARNING: wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/sch311x_wdt.c:319:8-24: WARNING: sch311x_wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/scx200_wdt.c:105:8-24: WARNING: scx200_wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/smsc37b787_wdt.c:369:8-24: WARNING: wb_smsc_wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/w83877f_wdt.c:227:8-24: WARNING: wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/w83977f_wdt.c:301:8-24: WARNING: wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/wafer5823wdt.c:200:8-24: WARNING: wafwdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/watchdog_dev.c:828:8-24: WARNING: watchdog_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/wdrtas.c:379:8-24: WARNING: wdrtas_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/wdrtas.c:445:8-24: WARNING: wdrtas_temp_fops: .read() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/wdt285.c:104:1-17: WARNING: watchdog_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/wdt977.c:276:8-24: WARNING: wdt977_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/wdt.c:424:8-24: WARNING: wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/wdt.c:484:8-24: WARNING: wdt_temp_fops: .read() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/wdt_pci.c:464:8-24: WARNING: wdtpci_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/wdt_pci.c:527:8-24: WARNING: wdtpci_temp_fops: .read() has stream semantic; safe to change nonseekable_open -> stream_open. net/batman-adv/log.c:105:1-17: WARNING: batadv_log_fops: .read() has stream semantic; safe to change nonseekable_open -> stream_open. sound/core/control.c:57:7-23: WARNING: snd_ctl_f_ops: .read() has stream semantic; safe to change nonseekable_open -> stream_open. sound/core/rawmidi.c:385:7-23: WARNING: snd_rawmidi_f_ops: .read() and .write() have stream semantic; safe to change nonseekable_open -> stream_open. sound/core/seq/seq_clientmgr.c:310:7-23: WARNING: snd_seq_f_ops: .read() and .write() have stream semantic; safe to change nonseekable_open -> stream_open. sound/core/timer.c:1428:7-23: WARNING: snd_timer_f_ops: .read() has stream semantic; safe to change nonseekable_open -> stream_open. One can also recheck/review the patch via generating it with explanation comments included via $ make coccicheck MODE=patch COCCI=scripts/coccinelle/api/stream_open.cocci SPFLAGS="-D explain" (*) This second group also contains cases with read/write deadlocks that stream_open.cocci don't yet detect, but which are still valid to convert to stream_open since ppos is not used. For example drivers/pci/switch/switchtec.c calls wait_for_completion_interruptible() in its .read, but stream_open.cocci currently detects only "wait_event*" as blocking. Cc: Michael Kerrisk <mtk.manpages@gmail.com> Cc: Yongzhi Pan <panyongzhi@gmail.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: David Vrabel <david.vrabel@citrix.com> Cc: Juergen Gross <jgross@suse.com> Cc: Miklos Szeredi <miklos@szeredi.hu> Cc: Tejun Heo <tj@kernel.org> Cc: Kirill Tkhai <ktkhai@virtuozzo.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Christoph Hellwig <hch@lst.de> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Julia Lawall <Julia.Lawall@lip6.fr> Cc: Nikolaus Rath <Nikolaus@rath.org> Cc: Han-Wen Nienhuys <hanwen@google.com> Cc: Anatolij Gustschin <agust@denx.de> Cc: Jeff Dike <jdike@addtoit.com> Cc: Richard Weinberger <richard@nod.at> Cc: Anton Ivanov <anton.ivanov@cambridgegreys.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "James R. Van Zandt" <jrv@vanzandt.mv.com> Cc: Corey Minyard <minyard@acm.org> Cc: Harald Welte <laforge@gnumonks.org> Acked-by: Lubomir Rintel <lkundrak@v3.sk> [scr24x_cs] Cc: Stefan Richter <stefanr@s5r6.in-berlin.de> Cc: Johan Hovold <johan@kernel.org> Cc: David Herrmann <dh.herrmann@googlemail.com> Cc: Jiri Kosina <jikos@kernel.org> Cc: Benjamin Tissoires <benjamin.tissoires@redhat.com> Cc: Jean Delvare <jdelvare@suse.com> Acked-by: Guenter Roeck <linux@roeck-us.net> [watchdog/* hwmon/*] Cc: Rudolf Marek <r.marek@assembler.cz> Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: Karsten Keil <isdn@linux-pingi.de> Cc: Jacek Anaszewski <jacek.anaszewski@gmail.com> Cc: Pavel Machek <pavel@ucw.cz> Cc: Mauro Carvalho Chehab <mchehab@kernel.org> Cc: Kurt Schwemmer <kurt.schwemmer@microsemi.com> Acked-by: Logan Gunthorpe <logang@deltatee.com> [drivers/pci/switch/switchtec] Acked-by: Bjorn Helgaas <bhelgaas@google.com> [drivers/pci/switch/switchtec] Cc: Benson Leung <bleung@chromium.org> Acked-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> [platform/chrome] Cc: Alessandro Zummo <a.zummo@towertech.it> Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com> [rtc/*] Cc: Mark Brown <broonie@kernel.org> Cc: Wim Van Sebroeck <wim@linux-watchdog.org> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: bcm-kernel-feedback-list@broadcom.com Cc: Wan ZongShun <mcuos.com@gmail.com> Cc: Zwane Mwaikambo <zwanem@gmail.com> Cc: Marek Lindner <mareklindner@neomailbox.ch> Cc: Simon Wunderlich <sw@simonwunderlich.de> Cc: Antonio Quartulli <a@unstable.cc> Cc: "David S. Miller" <davem@davemloft.net> Cc: Johannes Berg <johannes@sipsolutions.net> Cc: Jaroslav Kysela <perex@perex.cz> Cc: Takashi Iwai <tiwai@suse.com> Signed-off-by: Kirill Smelkov <kirr@nexedi.com>
2019-03-27 04:51:19 +08:00
return stream_open(inode, file);
out_mod:
watchdog: Separate and maintain variables based on variable lifetime All variables required by the watchdog core to manage a watchdog are currently stored in struct watchdog_device. The lifetime of those variables is determined by the watchdog driver. However, the lifetime of variables used by the watchdog core differs from the lifetime of struct watchdog_device. To remedy this situation, watchdog drivers can implement ref and unref callbacks, to be used by the watchdog core to lock struct watchdog_device in memory. While this solves the immediate problem, it depends on watchdog drivers to actually implement the ref/unref callbacks. This is error prone, often not implemented in the first place, or not implemented correctly. To solve the problem without requiring driver support, split the variables in struct watchdog_device into two data structures - one for variables associated with the watchdog driver, one for variables associated with the watchdog core. With this approach, the watchdog core can keep track of its variable lifetime and no longer depends on ref/unref callbacks in the driver. As a side effect, some of the variables originally in struct watchdog_driver are now private to the watchdog core and no longer visible in watchdog drivers. As a side effect of the changes made, an ioctl will now always fail with -ENODEV after a watchdog device was unregistered with the character device still open. Previously, it would only fail with -ENODEV in some situations. Also, ioctl operations are now atomic from driver perspective. With this change, it is now guaranteed that the driver will not unregister a watchdog between a timeout change and the subsequent ping. The 'ref' and 'unref' callbacks in struct watchdog_driver are no longer used and marked as deprecated. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-12-26 08:01:42 +08:00
module_put(wd_data->wdd->ops->owner);
out_clear:
clear_bit(_WDOG_DEV_OPEN, &wd_data->status);
return err;
}
watchdog: Fix the race between the release of watchdog_core_data and cdev The struct cdev is embedded in the struct watchdog_core_data. In the current code, we manage the watchdog_core_data with a kref, but the cdev is manged by a kobject. There is no any relationship between this kref and kobject. So it is possible that the watchdog_core_data is freed before the cdev is entirely released. We can easily get the following call trace with CONFIG_DEBUG_KOBJECT_RELEASE and CONFIG_DEBUG_OBJECTS_TIMERS enabled. ODEBUG: free active (active state 0) object type: timer_list hint: delayed_work_timer_fn+0x0/0x38 WARNING: CPU: 23 PID: 1028 at lib/debugobjects.c:481 debug_print_object+0xb0/0xf0 Modules linked in: softdog(-) deflate ctr twofish_generic twofish_common camellia_generic serpent_generic blowfish_generic blowfish_common cast5_generic cast_common cmac xcbc af_key sch_fq_codel openvswitch nsh nf_conncount nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 CPU: 23 PID: 1028 Comm: modprobe Not tainted 5.3.0-next-20190924-yoctodev-standard+ #180 Hardware name: Marvell OcteonTX CN96XX board (DT) pstate: 00400009 (nzcv daif +PAN -UAO) pc : debug_print_object+0xb0/0xf0 lr : debug_print_object+0xb0/0xf0 sp : ffff80001cbcfc70 x29: ffff80001cbcfc70 x28: ffff800010ea2128 x27: ffff800010bad000 x26: 0000000000000000 x25: ffff80001103c640 x24: ffff80001107b268 x23: ffff800010bad9e8 x22: ffff800010ea2128 x21: ffff000bc2c62af8 x20: ffff80001103c600 x19: ffff800010e867d8 x18: 0000000000000060 x17: 0000000000000000 x16: 0000000000000000 x15: ffff000bd7240470 x14: 6e6968207473696c x13: 5f72656d6974203a x12: 6570797420746365 x11: 6a626f2029302065 x10: 7461747320657669 x9 : 7463612820657669 x8 : 3378302f3078302b x7 : 0000000000001d7a x6 : ffff800010fd5889 x5 : 0000000000000000 x4 : 0000000000000000 x3 : 0000000000000000 x2 : ffff000bff948548 x1 : 276a1c9e1edc2300 x0 : 0000000000000000 Call trace: debug_print_object+0xb0/0xf0 debug_check_no_obj_freed+0x1e8/0x210 kfree+0x1b8/0x368 watchdog_cdev_unregister+0x88/0xc8 watchdog_dev_unregister+0x38/0x48 watchdog_unregister_device+0xa8/0x100 softdog_exit+0x18/0xfec4 [softdog] __arm64_sys_delete_module+0x174/0x200 el0_svc_handler+0xd0/0x1c8 el0_svc+0x8/0xc This is a common issue when using cdev embedded in a struct. Fortunately, we already have a mechanism to solve this kind of issue. Please see commit 233ed09d7fda ("chardev: add helper function to register char devs with a struct device") for more detail. In this patch, we choose to embed the struct device into the watchdog_core_data, and use the API provided by the commit 233ed09d7fda to make sure that the release of watchdog_core_data and cdev are in sequence. Signed-off-by: Kevin Hao <haokexin@gmail.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20191008112934.29669-1-haokexin@gmail.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-10-08 19:29:34 +08:00
static void watchdog_core_data_release(struct device *dev)
watchdog: Separate and maintain variables based on variable lifetime All variables required by the watchdog core to manage a watchdog are currently stored in struct watchdog_device. The lifetime of those variables is determined by the watchdog driver. However, the lifetime of variables used by the watchdog core differs from the lifetime of struct watchdog_device. To remedy this situation, watchdog drivers can implement ref and unref callbacks, to be used by the watchdog core to lock struct watchdog_device in memory. While this solves the immediate problem, it depends on watchdog drivers to actually implement the ref/unref callbacks. This is error prone, often not implemented in the first place, or not implemented correctly. To solve the problem without requiring driver support, split the variables in struct watchdog_device into two data structures - one for variables associated with the watchdog driver, one for variables associated with the watchdog core. With this approach, the watchdog core can keep track of its variable lifetime and no longer depends on ref/unref callbacks in the driver. As a side effect, some of the variables originally in struct watchdog_driver are now private to the watchdog core and no longer visible in watchdog drivers. As a side effect of the changes made, an ioctl will now always fail with -ENODEV after a watchdog device was unregistered with the character device still open. Previously, it would only fail with -ENODEV in some situations. Also, ioctl operations are now atomic from driver perspective. With this change, it is now guaranteed that the driver will not unregister a watchdog between a timeout change and the subsequent ping. The 'ref' and 'unref' callbacks in struct watchdog_driver are no longer used and marked as deprecated. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-12-26 08:01:42 +08:00
{
struct watchdog_core_data *wd_data;
watchdog: Fix the race between the release of watchdog_core_data and cdev The struct cdev is embedded in the struct watchdog_core_data. In the current code, we manage the watchdog_core_data with a kref, but the cdev is manged by a kobject. There is no any relationship between this kref and kobject. So it is possible that the watchdog_core_data is freed before the cdev is entirely released. We can easily get the following call trace with CONFIG_DEBUG_KOBJECT_RELEASE and CONFIG_DEBUG_OBJECTS_TIMERS enabled. ODEBUG: free active (active state 0) object type: timer_list hint: delayed_work_timer_fn+0x0/0x38 WARNING: CPU: 23 PID: 1028 at lib/debugobjects.c:481 debug_print_object+0xb0/0xf0 Modules linked in: softdog(-) deflate ctr twofish_generic twofish_common camellia_generic serpent_generic blowfish_generic blowfish_common cast5_generic cast_common cmac xcbc af_key sch_fq_codel openvswitch nsh nf_conncount nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 CPU: 23 PID: 1028 Comm: modprobe Not tainted 5.3.0-next-20190924-yoctodev-standard+ #180 Hardware name: Marvell OcteonTX CN96XX board (DT) pstate: 00400009 (nzcv daif +PAN -UAO) pc : debug_print_object+0xb0/0xf0 lr : debug_print_object+0xb0/0xf0 sp : ffff80001cbcfc70 x29: ffff80001cbcfc70 x28: ffff800010ea2128 x27: ffff800010bad000 x26: 0000000000000000 x25: ffff80001103c640 x24: ffff80001107b268 x23: ffff800010bad9e8 x22: ffff800010ea2128 x21: ffff000bc2c62af8 x20: ffff80001103c600 x19: ffff800010e867d8 x18: 0000000000000060 x17: 0000000000000000 x16: 0000000000000000 x15: ffff000bd7240470 x14: 6e6968207473696c x13: 5f72656d6974203a x12: 6570797420746365 x11: 6a626f2029302065 x10: 7461747320657669 x9 : 7463612820657669 x8 : 3378302f3078302b x7 : 0000000000001d7a x6 : ffff800010fd5889 x5 : 0000000000000000 x4 : 0000000000000000 x3 : 0000000000000000 x2 : ffff000bff948548 x1 : 276a1c9e1edc2300 x0 : 0000000000000000 Call trace: debug_print_object+0xb0/0xf0 debug_check_no_obj_freed+0x1e8/0x210 kfree+0x1b8/0x368 watchdog_cdev_unregister+0x88/0xc8 watchdog_dev_unregister+0x38/0x48 watchdog_unregister_device+0xa8/0x100 softdog_exit+0x18/0xfec4 [softdog] __arm64_sys_delete_module+0x174/0x200 el0_svc_handler+0xd0/0x1c8 el0_svc+0x8/0xc This is a common issue when using cdev embedded in a struct. Fortunately, we already have a mechanism to solve this kind of issue. Please see commit 233ed09d7fda ("chardev: add helper function to register char devs with a struct device") for more detail. In this patch, we choose to embed the struct device into the watchdog_core_data, and use the API provided by the commit 233ed09d7fda to make sure that the release of watchdog_core_data and cdev are in sequence. Signed-off-by: Kevin Hao <haokexin@gmail.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20191008112934.29669-1-haokexin@gmail.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-10-08 19:29:34 +08:00
wd_data = container_of(dev, struct watchdog_core_data, dev);
watchdog: Separate and maintain variables based on variable lifetime All variables required by the watchdog core to manage a watchdog are currently stored in struct watchdog_device. The lifetime of those variables is determined by the watchdog driver. However, the lifetime of variables used by the watchdog core differs from the lifetime of struct watchdog_device. To remedy this situation, watchdog drivers can implement ref and unref callbacks, to be used by the watchdog core to lock struct watchdog_device in memory. While this solves the immediate problem, it depends on watchdog drivers to actually implement the ref/unref callbacks. This is error prone, often not implemented in the first place, or not implemented correctly. To solve the problem without requiring driver support, split the variables in struct watchdog_device into two data structures - one for variables associated with the watchdog driver, one for variables associated with the watchdog core. With this approach, the watchdog core can keep track of its variable lifetime and no longer depends on ref/unref callbacks in the driver. As a side effect, some of the variables originally in struct watchdog_driver are now private to the watchdog core and no longer visible in watchdog drivers. As a side effect of the changes made, an ioctl will now always fail with -ENODEV after a watchdog device was unregistered with the character device still open. Previously, it would only fail with -ENODEV in some situations. Also, ioctl operations are now atomic from driver perspective. With this change, it is now guaranteed that the driver will not unregister a watchdog between a timeout change and the subsequent ping. The 'ref' and 'unref' callbacks in struct watchdog_driver are no longer used and marked as deprecated. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-12-26 08:01:42 +08:00
kfree(wd_data);
}
/*
* watchdog_release: release the watchdog device.
* @inode: inode of device
* @file: file handle to device
*
* This is the code for when /dev/watchdog gets closed. We will only
* stop the watchdog when we have received the magic char (and nowayout
* was not set), else the watchdog will keep running.
*/
static int watchdog_release(struct inode *inode, struct file *file)
{
watchdog: Separate and maintain variables based on variable lifetime All variables required by the watchdog core to manage a watchdog are currently stored in struct watchdog_device. The lifetime of those variables is determined by the watchdog driver. However, the lifetime of variables used by the watchdog core differs from the lifetime of struct watchdog_device. To remedy this situation, watchdog drivers can implement ref and unref callbacks, to be used by the watchdog core to lock struct watchdog_device in memory. While this solves the immediate problem, it depends on watchdog drivers to actually implement the ref/unref callbacks. This is error prone, often not implemented in the first place, or not implemented correctly. To solve the problem without requiring driver support, split the variables in struct watchdog_device into two data structures - one for variables associated with the watchdog driver, one for variables associated with the watchdog core. With this approach, the watchdog core can keep track of its variable lifetime and no longer depends on ref/unref callbacks in the driver. As a side effect, some of the variables originally in struct watchdog_driver are now private to the watchdog core and no longer visible in watchdog drivers. As a side effect of the changes made, an ioctl will now always fail with -ENODEV after a watchdog device was unregistered with the character device still open. Previously, it would only fail with -ENODEV in some situations. Also, ioctl operations are now atomic from driver perspective. With this change, it is now guaranteed that the driver will not unregister a watchdog between a timeout change and the subsequent ping. The 'ref' and 'unref' callbacks in struct watchdog_driver are no longer used and marked as deprecated. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-12-26 08:01:42 +08:00
struct watchdog_core_data *wd_data = file->private_data;
struct watchdog_device *wdd;
int err = -EBUSY;
bool running;
watchdog: Separate and maintain variables based on variable lifetime All variables required by the watchdog core to manage a watchdog are currently stored in struct watchdog_device. The lifetime of those variables is determined by the watchdog driver. However, the lifetime of variables used by the watchdog core differs from the lifetime of struct watchdog_device. To remedy this situation, watchdog drivers can implement ref and unref callbacks, to be used by the watchdog core to lock struct watchdog_device in memory. While this solves the immediate problem, it depends on watchdog drivers to actually implement the ref/unref callbacks. This is error prone, often not implemented in the first place, or not implemented correctly. To solve the problem without requiring driver support, split the variables in struct watchdog_device into two data structures - one for variables associated with the watchdog driver, one for variables associated with the watchdog core. With this approach, the watchdog core can keep track of its variable lifetime and no longer depends on ref/unref callbacks in the driver. As a side effect, some of the variables originally in struct watchdog_driver are now private to the watchdog core and no longer visible in watchdog drivers. As a side effect of the changes made, an ioctl will now always fail with -ENODEV after a watchdog device was unregistered with the character device still open. Previously, it would only fail with -ENODEV in some situations. Also, ioctl operations are now atomic from driver perspective. With this change, it is now guaranteed that the driver will not unregister a watchdog between a timeout change and the subsequent ping. The 'ref' and 'unref' callbacks in struct watchdog_driver are no longer used and marked as deprecated. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-12-26 08:01:42 +08:00
mutex_lock(&wd_data->lock);
wdd = wd_data->wdd;
if (!wdd)
goto done;
/*
* We only stop the watchdog if we received the magic character
* or if WDIOF_MAGICCLOSE is not set. If nowayout was set then
* watchdog_stop will fail.
*/
if (!watchdog_active(wdd))
err = 0;
watchdog: Separate and maintain variables based on variable lifetime All variables required by the watchdog core to manage a watchdog are currently stored in struct watchdog_device. The lifetime of those variables is determined by the watchdog driver. However, the lifetime of variables used by the watchdog core differs from the lifetime of struct watchdog_device. To remedy this situation, watchdog drivers can implement ref and unref callbacks, to be used by the watchdog core to lock struct watchdog_device in memory. While this solves the immediate problem, it depends on watchdog drivers to actually implement the ref/unref callbacks. This is error prone, often not implemented in the first place, or not implemented correctly. To solve the problem without requiring driver support, split the variables in struct watchdog_device into two data structures - one for variables associated with the watchdog driver, one for variables associated with the watchdog core. With this approach, the watchdog core can keep track of its variable lifetime and no longer depends on ref/unref callbacks in the driver. As a side effect, some of the variables originally in struct watchdog_driver are now private to the watchdog core and no longer visible in watchdog drivers. As a side effect of the changes made, an ioctl will now always fail with -ENODEV after a watchdog device was unregistered with the character device still open. Previously, it would only fail with -ENODEV in some situations. Also, ioctl operations are now atomic from driver perspective. With this change, it is now guaranteed that the driver will not unregister a watchdog between a timeout change and the subsequent ping. The 'ref' and 'unref' callbacks in struct watchdog_driver are no longer used and marked as deprecated. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-12-26 08:01:42 +08:00
else if (test_and_clear_bit(_WDOG_ALLOW_RELEASE, &wd_data->status) ||
!(wdd->info->options & WDIOF_MAGICCLOSE))
err = watchdog_stop(wdd);
/* If the watchdog was not stopped, send a keepalive ping */
if (err < 0) {
pr_crit("watchdog%d: watchdog did not stop!\n", wdd->id);
watchdog_ping(wdd);
}
watchdog_update_worker(wdd);
/* make sure that /dev/watchdog can be re-opened */
watchdog: Separate and maintain variables based on variable lifetime All variables required by the watchdog core to manage a watchdog are currently stored in struct watchdog_device. The lifetime of those variables is determined by the watchdog driver. However, the lifetime of variables used by the watchdog core differs from the lifetime of struct watchdog_device. To remedy this situation, watchdog drivers can implement ref and unref callbacks, to be used by the watchdog core to lock struct watchdog_device in memory. While this solves the immediate problem, it depends on watchdog drivers to actually implement the ref/unref callbacks. This is error prone, often not implemented in the first place, or not implemented correctly. To solve the problem without requiring driver support, split the variables in struct watchdog_device into two data structures - one for variables associated with the watchdog driver, one for variables associated with the watchdog core. With this approach, the watchdog core can keep track of its variable lifetime and no longer depends on ref/unref callbacks in the driver. As a side effect, some of the variables originally in struct watchdog_driver are now private to the watchdog core and no longer visible in watchdog drivers. As a side effect of the changes made, an ioctl will now always fail with -ENODEV after a watchdog device was unregistered with the character device still open. Previously, it would only fail with -ENODEV in some situations. Also, ioctl operations are now atomic from driver perspective. With this change, it is now guaranteed that the driver will not unregister a watchdog between a timeout change and the subsequent ping. The 'ref' and 'unref' callbacks in struct watchdog_driver are no longer used and marked as deprecated. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-12-26 08:01:42 +08:00
clear_bit(_WDOG_DEV_OPEN, &wd_data->status);
watchdog: Separate and maintain variables based on variable lifetime All variables required by the watchdog core to manage a watchdog are currently stored in struct watchdog_device. The lifetime of those variables is determined by the watchdog driver. However, the lifetime of variables used by the watchdog core differs from the lifetime of struct watchdog_device. To remedy this situation, watchdog drivers can implement ref and unref callbacks, to be used by the watchdog core to lock struct watchdog_device in memory. While this solves the immediate problem, it depends on watchdog drivers to actually implement the ref/unref callbacks. This is error prone, often not implemented in the first place, or not implemented correctly. To solve the problem without requiring driver support, split the variables in struct watchdog_device into two data structures - one for variables associated with the watchdog driver, one for variables associated with the watchdog core. With this approach, the watchdog core can keep track of its variable lifetime and no longer depends on ref/unref callbacks in the driver. As a side effect, some of the variables originally in struct watchdog_driver are now private to the watchdog core and no longer visible in watchdog drivers. As a side effect of the changes made, an ioctl will now always fail with -ENODEV after a watchdog device was unregistered with the character device still open. Previously, it would only fail with -ENODEV in some situations. Also, ioctl operations are now atomic from driver perspective. With this change, it is now guaranteed that the driver will not unregister a watchdog between a timeout change and the subsequent ping. The 'ref' and 'unref' callbacks in struct watchdog_driver are no longer used and marked as deprecated. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-12-26 08:01:42 +08:00
done:
running = wdd && watchdog_hw_running(wdd);
watchdog: Separate and maintain variables based on variable lifetime All variables required by the watchdog core to manage a watchdog are currently stored in struct watchdog_device. The lifetime of those variables is determined by the watchdog driver. However, the lifetime of variables used by the watchdog core differs from the lifetime of struct watchdog_device. To remedy this situation, watchdog drivers can implement ref and unref callbacks, to be used by the watchdog core to lock struct watchdog_device in memory. While this solves the immediate problem, it depends on watchdog drivers to actually implement the ref/unref callbacks. This is error prone, often not implemented in the first place, or not implemented correctly. To solve the problem without requiring driver support, split the variables in struct watchdog_device into two data structures - one for variables associated with the watchdog driver, one for variables associated with the watchdog core. With this approach, the watchdog core can keep track of its variable lifetime and no longer depends on ref/unref callbacks in the driver. As a side effect, some of the variables originally in struct watchdog_driver are now private to the watchdog core and no longer visible in watchdog drivers. As a side effect of the changes made, an ioctl will now always fail with -ENODEV after a watchdog device was unregistered with the character device still open. Previously, it would only fail with -ENODEV in some situations. Also, ioctl operations are now atomic from driver perspective. With this change, it is now guaranteed that the driver will not unregister a watchdog between a timeout change and the subsequent ping. The 'ref' and 'unref' callbacks in struct watchdog_driver are no longer used and marked as deprecated. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-12-26 08:01:42 +08:00
mutex_unlock(&wd_data->lock);
/*
* Allow the owner module to be unloaded again unless the watchdog
* is still running. If the watchdog is still running, it can not
* be stopped, and its driver must not be unloaded.
*/
if (!running) {
module_put(wd_data->cdev.owner);
watchdog: Fix the race between the release of watchdog_core_data and cdev The struct cdev is embedded in the struct watchdog_core_data. In the current code, we manage the watchdog_core_data with a kref, but the cdev is manged by a kobject. There is no any relationship between this kref and kobject. So it is possible that the watchdog_core_data is freed before the cdev is entirely released. We can easily get the following call trace with CONFIG_DEBUG_KOBJECT_RELEASE and CONFIG_DEBUG_OBJECTS_TIMERS enabled. ODEBUG: free active (active state 0) object type: timer_list hint: delayed_work_timer_fn+0x0/0x38 WARNING: CPU: 23 PID: 1028 at lib/debugobjects.c:481 debug_print_object+0xb0/0xf0 Modules linked in: softdog(-) deflate ctr twofish_generic twofish_common camellia_generic serpent_generic blowfish_generic blowfish_common cast5_generic cast_common cmac xcbc af_key sch_fq_codel openvswitch nsh nf_conncount nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 CPU: 23 PID: 1028 Comm: modprobe Not tainted 5.3.0-next-20190924-yoctodev-standard+ #180 Hardware name: Marvell OcteonTX CN96XX board (DT) pstate: 00400009 (nzcv daif +PAN -UAO) pc : debug_print_object+0xb0/0xf0 lr : debug_print_object+0xb0/0xf0 sp : ffff80001cbcfc70 x29: ffff80001cbcfc70 x28: ffff800010ea2128 x27: ffff800010bad000 x26: 0000000000000000 x25: ffff80001103c640 x24: ffff80001107b268 x23: ffff800010bad9e8 x22: ffff800010ea2128 x21: ffff000bc2c62af8 x20: ffff80001103c600 x19: ffff800010e867d8 x18: 0000000000000060 x17: 0000000000000000 x16: 0000000000000000 x15: ffff000bd7240470 x14: 6e6968207473696c x13: 5f72656d6974203a x12: 6570797420746365 x11: 6a626f2029302065 x10: 7461747320657669 x9 : 7463612820657669 x8 : 3378302f3078302b x7 : 0000000000001d7a x6 : ffff800010fd5889 x5 : 0000000000000000 x4 : 0000000000000000 x3 : 0000000000000000 x2 : ffff000bff948548 x1 : 276a1c9e1edc2300 x0 : 0000000000000000 Call trace: debug_print_object+0xb0/0xf0 debug_check_no_obj_freed+0x1e8/0x210 kfree+0x1b8/0x368 watchdog_cdev_unregister+0x88/0xc8 watchdog_dev_unregister+0x38/0x48 watchdog_unregister_device+0xa8/0x100 softdog_exit+0x18/0xfec4 [softdog] __arm64_sys_delete_module+0x174/0x200 el0_svc_handler+0xd0/0x1c8 el0_svc+0x8/0xc This is a common issue when using cdev embedded in a struct. Fortunately, we already have a mechanism to solve this kind of issue. Please see commit 233ed09d7fda ("chardev: add helper function to register char devs with a struct device") for more detail. In this patch, we choose to embed the struct device into the watchdog_core_data, and use the API provided by the commit 233ed09d7fda to make sure that the release of watchdog_core_data and cdev are in sequence. Signed-off-by: Kevin Hao <haokexin@gmail.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20191008112934.29669-1-haokexin@gmail.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-10-08 19:29:34 +08:00
put_device(&wd_data->dev);
}
return 0;
}
static const struct file_operations watchdog_fops = {
.owner = THIS_MODULE,
.write = watchdog_write,
.unlocked_ioctl = watchdog_ioctl,
.compat_ioctl = compat_ptr_ioctl,
.open = watchdog_open,
.release = watchdog_release,
};
static struct miscdevice watchdog_miscdev = {
.minor = WATCHDOG_MINOR,
.name = "watchdog",
.fops = &watchdog_fops,
};
watchdog: Fix the race between the release of watchdog_core_data and cdev The struct cdev is embedded in the struct watchdog_core_data. In the current code, we manage the watchdog_core_data with a kref, but the cdev is manged by a kobject. There is no any relationship between this kref and kobject. So it is possible that the watchdog_core_data is freed before the cdev is entirely released. We can easily get the following call trace with CONFIG_DEBUG_KOBJECT_RELEASE and CONFIG_DEBUG_OBJECTS_TIMERS enabled. ODEBUG: free active (active state 0) object type: timer_list hint: delayed_work_timer_fn+0x0/0x38 WARNING: CPU: 23 PID: 1028 at lib/debugobjects.c:481 debug_print_object+0xb0/0xf0 Modules linked in: softdog(-) deflate ctr twofish_generic twofish_common camellia_generic serpent_generic blowfish_generic blowfish_common cast5_generic cast_common cmac xcbc af_key sch_fq_codel openvswitch nsh nf_conncount nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 CPU: 23 PID: 1028 Comm: modprobe Not tainted 5.3.0-next-20190924-yoctodev-standard+ #180 Hardware name: Marvell OcteonTX CN96XX board (DT) pstate: 00400009 (nzcv daif +PAN -UAO) pc : debug_print_object+0xb0/0xf0 lr : debug_print_object+0xb0/0xf0 sp : ffff80001cbcfc70 x29: ffff80001cbcfc70 x28: ffff800010ea2128 x27: ffff800010bad000 x26: 0000000000000000 x25: ffff80001103c640 x24: ffff80001107b268 x23: ffff800010bad9e8 x22: ffff800010ea2128 x21: ffff000bc2c62af8 x20: ffff80001103c600 x19: ffff800010e867d8 x18: 0000000000000060 x17: 0000000000000000 x16: 0000000000000000 x15: ffff000bd7240470 x14: 6e6968207473696c x13: 5f72656d6974203a x12: 6570797420746365 x11: 6a626f2029302065 x10: 7461747320657669 x9 : 7463612820657669 x8 : 3378302f3078302b x7 : 0000000000001d7a x6 : ffff800010fd5889 x5 : 0000000000000000 x4 : 0000000000000000 x3 : 0000000000000000 x2 : ffff000bff948548 x1 : 276a1c9e1edc2300 x0 : 0000000000000000 Call trace: debug_print_object+0xb0/0xf0 debug_check_no_obj_freed+0x1e8/0x210 kfree+0x1b8/0x368 watchdog_cdev_unregister+0x88/0xc8 watchdog_dev_unregister+0x38/0x48 watchdog_unregister_device+0xa8/0x100 softdog_exit+0x18/0xfec4 [softdog] __arm64_sys_delete_module+0x174/0x200 el0_svc_handler+0xd0/0x1c8 el0_svc+0x8/0xc This is a common issue when using cdev embedded in a struct. Fortunately, we already have a mechanism to solve this kind of issue. Please see commit 233ed09d7fda ("chardev: add helper function to register char devs with a struct device") for more detail. In this patch, we choose to embed the struct device into the watchdog_core_data, and use the API provided by the commit 233ed09d7fda to make sure that the release of watchdog_core_data and cdev are in sequence. Signed-off-by: Kevin Hao <haokexin@gmail.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20191008112934.29669-1-haokexin@gmail.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-10-08 19:29:34 +08:00
static struct class watchdog_class = {
.name = "watchdog",
.owner = THIS_MODULE,
.dev_groups = wdt_groups,
};
/*
* watchdog_cdev_register: register watchdog character device
* @wdd: watchdog device
*
* Register a watchdog character device including handling the legacy
* /dev/watchdog node. /dev/watchdog is actually a miscdevice and
* thus we set it up like that.
*/
watchdog: Fix the race between the release of watchdog_core_data and cdev The struct cdev is embedded in the struct watchdog_core_data. In the current code, we manage the watchdog_core_data with a kref, but the cdev is manged by a kobject. There is no any relationship between this kref and kobject. So it is possible that the watchdog_core_data is freed before the cdev is entirely released. We can easily get the following call trace with CONFIG_DEBUG_KOBJECT_RELEASE and CONFIG_DEBUG_OBJECTS_TIMERS enabled. ODEBUG: free active (active state 0) object type: timer_list hint: delayed_work_timer_fn+0x0/0x38 WARNING: CPU: 23 PID: 1028 at lib/debugobjects.c:481 debug_print_object+0xb0/0xf0 Modules linked in: softdog(-) deflate ctr twofish_generic twofish_common camellia_generic serpent_generic blowfish_generic blowfish_common cast5_generic cast_common cmac xcbc af_key sch_fq_codel openvswitch nsh nf_conncount nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 CPU: 23 PID: 1028 Comm: modprobe Not tainted 5.3.0-next-20190924-yoctodev-standard+ #180 Hardware name: Marvell OcteonTX CN96XX board (DT) pstate: 00400009 (nzcv daif +PAN -UAO) pc : debug_print_object+0xb0/0xf0 lr : debug_print_object+0xb0/0xf0 sp : ffff80001cbcfc70 x29: ffff80001cbcfc70 x28: ffff800010ea2128 x27: ffff800010bad000 x26: 0000000000000000 x25: ffff80001103c640 x24: ffff80001107b268 x23: ffff800010bad9e8 x22: ffff800010ea2128 x21: ffff000bc2c62af8 x20: ffff80001103c600 x19: ffff800010e867d8 x18: 0000000000000060 x17: 0000000000000000 x16: 0000000000000000 x15: ffff000bd7240470 x14: 6e6968207473696c x13: 5f72656d6974203a x12: 6570797420746365 x11: 6a626f2029302065 x10: 7461747320657669 x9 : 7463612820657669 x8 : 3378302f3078302b x7 : 0000000000001d7a x6 : ffff800010fd5889 x5 : 0000000000000000 x4 : 0000000000000000 x3 : 0000000000000000 x2 : ffff000bff948548 x1 : 276a1c9e1edc2300 x0 : 0000000000000000 Call trace: debug_print_object+0xb0/0xf0 debug_check_no_obj_freed+0x1e8/0x210 kfree+0x1b8/0x368 watchdog_cdev_unregister+0x88/0xc8 watchdog_dev_unregister+0x38/0x48 watchdog_unregister_device+0xa8/0x100 softdog_exit+0x18/0xfec4 [softdog] __arm64_sys_delete_module+0x174/0x200 el0_svc_handler+0xd0/0x1c8 el0_svc+0x8/0xc This is a common issue when using cdev embedded in a struct. Fortunately, we already have a mechanism to solve this kind of issue. Please see commit 233ed09d7fda ("chardev: add helper function to register char devs with a struct device") for more detail. In this patch, we choose to embed the struct device into the watchdog_core_data, and use the API provided by the commit 233ed09d7fda to make sure that the release of watchdog_core_data and cdev are in sequence. Signed-off-by: Kevin Hao <haokexin@gmail.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20191008112934.29669-1-haokexin@gmail.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-10-08 19:29:34 +08:00
static int watchdog_cdev_register(struct watchdog_device *wdd)
{
watchdog: Separate and maintain variables based on variable lifetime All variables required by the watchdog core to manage a watchdog are currently stored in struct watchdog_device. The lifetime of those variables is determined by the watchdog driver. However, the lifetime of variables used by the watchdog core differs from the lifetime of struct watchdog_device. To remedy this situation, watchdog drivers can implement ref and unref callbacks, to be used by the watchdog core to lock struct watchdog_device in memory. While this solves the immediate problem, it depends on watchdog drivers to actually implement the ref/unref callbacks. This is error prone, often not implemented in the first place, or not implemented correctly. To solve the problem without requiring driver support, split the variables in struct watchdog_device into two data structures - one for variables associated with the watchdog driver, one for variables associated with the watchdog core. With this approach, the watchdog core can keep track of its variable lifetime and no longer depends on ref/unref callbacks in the driver. As a side effect, some of the variables originally in struct watchdog_driver are now private to the watchdog core and no longer visible in watchdog drivers. As a side effect of the changes made, an ioctl will now always fail with -ENODEV after a watchdog device was unregistered with the character device still open. Previously, it would only fail with -ENODEV in some situations. Also, ioctl operations are now atomic from driver perspective. With this change, it is now guaranteed that the driver will not unregister a watchdog between a timeout change and the subsequent ping. The 'ref' and 'unref' callbacks in struct watchdog_driver are no longer used and marked as deprecated. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-12-26 08:01:42 +08:00
struct watchdog_core_data *wd_data;
int err;
watchdog: Separate and maintain variables based on variable lifetime All variables required by the watchdog core to manage a watchdog are currently stored in struct watchdog_device. The lifetime of those variables is determined by the watchdog driver. However, the lifetime of variables used by the watchdog core differs from the lifetime of struct watchdog_device. To remedy this situation, watchdog drivers can implement ref and unref callbacks, to be used by the watchdog core to lock struct watchdog_device in memory. While this solves the immediate problem, it depends on watchdog drivers to actually implement the ref/unref callbacks. This is error prone, often not implemented in the first place, or not implemented correctly. To solve the problem without requiring driver support, split the variables in struct watchdog_device into two data structures - one for variables associated with the watchdog driver, one for variables associated with the watchdog core. With this approach, the watchdog core can keep track of its variable lifetime and no longer depends on ref/unref callbacks in the driver. As a side effect, some of the variables originally in struct watchdog_driver are now private to the watchdog core and no longer visible in watchdog drivers. As a side effect of the changes made, an ioctl will now always fail with -ENODEV after a watchdog device was unregistered with the character device still open. Previously, it would only fail with -ENODEV in some situations. Also, ioctl operations are now atomic from driver perspective. With this change, it is now guaranteed that the driver will not unregister a watchdog between a timeout change and the subsequent ping. The 'ref' and 'unref' callbacks in struct watchdog_driver are no longer used and marked as deprecated. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-12-26 08:01:42 +08:00
wd_data = kzalloc(sizeof(struct watchdog_core_data), GFP_KERNEL);
if (!wd_data)
return -ENOMEM;
mutex_init(&wd_data->lock);
wd_data->wdd = wdd;
wdd->wd_data = wd_data;
if (IS_ERR_OR_NULL(watchdog_kworker))
return -ENODEV;
watchdog: initialize device before misc_register When watchdog device is being registered, it calls misc_register that makes watchdog available for systemd to open. This is a data race scenario, because when device is open it may still have device struct not initialized - this in turn causes a crash. This patch moves device initialization before misc_register call and it solves the problem printed below. ------------[ cut here ]------------ WARNING: CPU: 3 PID: 1 at lib/kobject.c:612 kobject_get+0x50/0x54 kobject: '(null)' ((ptrval)): is not initialized, yet kobject_get() is being called. Modules linked in: k2_reset_status(O) davinci_wdt(+) sfn_platform_hwbcn(O) fsmddg_sfn(O) clk_misc_mmap(O) clk_sw_bcn(O) fsp_reset(O) cma_mod(O) slave_sup_notif(O) fpga_master(O) latency(O+) evnotify(O) enable_arm_pmu(O) xge(O) rio_mport_cdev br_netfilter bridge stp llc nvrd_checksum(O) ipv6 CPU: 3 PID: 1 Comm: systemd Tainted: G O 4.19.113-g2579778-fsm4_k2 #1 Hardware name: Keystone [<c02126c4>] (unwind_backtrace) from [<c020da94>] (show_stack+0x18/0x1c) [<c020da94>] (show_stack) from [<c07f87d8>] (dump_stack+0xb4/0xe8) [<c07f87d8>] (dump_stack) from [<c0221f70>] (__warn+0xfc/0x114) [<c0221f70>] (__warn) from [<c0221fd8>] (warn_slowpath_fmt+0x50/0x74) [<c0221fd8>] (warn_slowpath_fmt) from [<c07fd394>] (kobject_get+0x50/0x54) [<c07fd394>] (kobject_get) from [<c0602ce8>] (get_device+0x1c/0x24) [<c0602ce8>] (get_device) from [<c06961e0>] (watchdog_open+0x90/0xf0) [<c06961e0>] (watchdog_open) from [<c06001dc>] (misc_open+0x130/0x17c) [<c06001dc>] (misc_open) from [<c0388228>] (chrdev_open+0xec/0x1a8) [<c0388228>] (chrdev_open) from [<c037fa98>] (do_dentry_open+0x204/0x3cc) [<c037fa98>] (do_dentry_open) from [<c0391e2c>] (path_openat+0x330/0x1148) [<c0391e2c>] (path_openat) from [<c0394518>] (do_filp_open+0x78/0xec) [<c0394518>] (do_filp_open) from [<c0381100>] (do_sys_open+0x130/0x1f4) [<c0381100>] (do_sys_open) from [<c0201000>] (ret_fast_syscall+0x0/0x28) Exception stack(0xd2ceffa8 to 0xd2cefff0) ffa0: b6f69968 00000000 ffffff9c b6ebd210 000a0001 00000000 ffc0: b6f69968 00000000 00000000 00000142 fffffffd ffffffff 00b65530 bed7bb78 ffe0: 00000142 bed7ba70 b6cc2503 b6cc41d6 ---[ end trace 7b16eb105513974f ]--- ------------[ cut here ]------------ WARNING: CPU: 3 PID: 1 at lib/refcount.c:153 kobject_get+0x24/0x54 refcount_t: increment on 0; use-after-free. Modules linked in: k2_reset_status(O) davinci_wdt(+) sfn_platform_hwbcn(O) fsmddg_sfn(O) clk_misc_mmap(O) clk_sw_bcn(O) fsp_reset(O) cma_mod(O) slave_sup_notif(O) fpga_master(O) latency(O+) evnotify(O) enable_arm_pmu(O) xge(O) rio_mport_cdev br_netfilter bridge stp llc nvrd_checksum(O) ipv6 CPU: 3 PID: 1 Comm: systemd Tainted: G W O 4.19.113-g2579778-fsm4_k2 #1 Hardware name: Keystone [<c02126c4>] (unwind_backtrace) from [<c020da94>] (show_stack+0x18/0x1c) [<c020da94>] (show_stack) from [<c07f87d8>] (dump_stack+0xb4/0xe8) [<c07f87d8>] (dump_stack) from [<c0221f70>] (__warn+0xfc/0x114) [<c0221f70>] (__warn) from [<c0221fd8>] (warn_slowpath_fmt+0x50/0x74) [<c0221fd8>] (warn_slowpath_fmt) from [<c07fd368>] (kobject_get+0x24/0x54) [<c07fd368>] (kobject_get) from [<c0602ce8>] (get_device+0x1c/0x24) [<c0602ce8>] (get_device) from [<c06961e0>] (watchdog_open+0x90/0xf0) [<c06961e0>] (watchdog_open) from [<c06001dc>] (misc_open+0x130/0x17c) [<c06001dc>] (misc_open) from [<c0388228>] (chrdev_open+0xec/0x1a8) [<c0388228>] (chrdev_open) from [<c037fa98>] (do_dentry_open+0x204/0x3cc) [<c037fa98>] (do_dentry_open) from [<c0391e2c>] (path_openat+0x330/0x1148) [<c0391e2c>] (path_openat) from [<c0394518>] (do_filp_open+0x78/0xec) [<c0394518>] (do_filp_open) from [<c0381100>] (do_sys_open+0x130/0x1f4) [<c0381100>] (do_sys_open) from [<c0201000>] (ret_fast_syscall+0x0/0x28) Exception stack(0xd2ceffa8 to 0xd2cefff0) ffa0: b6f69968 00000000 ffffff9c b6ebd210 000a0001 00000000 ffc0: b6f69968 00000000 00000000 00000142 fffffffd ffffffff 00b65530 bed7bb78 ffe0: 00000142 bed7ba70 b6cc2503 b6cc41d6 ---[ end trace 7b16eb1055139750 ]--- Fixes: 72139dfa2464 ("watchdog: Fix the race between the release of watchdog_core_data and cdev") Reviewed-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Alexander Sverdlin <alexander.sverdlin@nokia.com> Signed-off-by: Krzysztof Sobota <krzysztof.sobota@nokia.com> Link: https://lore.kernel.org/r/20200717103109.14660-1-krzysztof.sobota@nokia.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2020-07-17 18:31:09 +08:00
device_initialize(&wd_data->dev);
wd_data->dev.devt = MKDEV(MAJOR(watchdog_devt), wdd->id);
wd_data->dev.class = &watchdog_class;
wd_data->dev.parent = wdd->parent;
wd_data->dev.groups = wdd->groups;
wd_data->dev.release = watchdog_core_data_release;
dev_set_drvdata(&wd_data->dev, wdd);
dev_set_name(&wd_data->dev, "watchdog%d", wdd->id);
kthread_init_work(&wd_data->work, watchdog_ping_work);
watchdog: prevent deferral of watchdogd wakeup on RT When PREEMPT_RT is enabled, all hrtimer expiry functions are deferred for execution into the context of ksoftirqd unless otherwise annotated. Deferring the expiry of the hrtimer used by the watchdog core, however, is a waste, as the callback does nothing but queue a kthread work item and wakeup watchdogd. It's worst then that, too: the deferral through ksoftirqd also means that for correct behavior a user must adjust the scheduling parameters of both watchdogd _and_ ksoftirqd, which is unnecessary and has other side effects (like causing unrelated expiry functions to execute at potentially elevated priority). Instead, mark the hrtimer used by the watchdog core as being _HARD to allow it's execution directly from hardirq context. The work done in this expiry function is well-bounded and minimal. A user still must adjust the scheduling parameters of the watchdogd to be correct w.r.t. their application needs. Link: https://lkml.kernel.org/r/0e02d8327aeca344096c246713033887bc490dd7.1538089180.git.julia@ni.com Cc: Guenter Roeck <linux@roeck-us.net> Reported-and-tested-by: Steffen Trumtrar <s.trumtrar@pengutronix.de> Reported-by: Tim Sander <tim@krieglstein.org> Signed-off-by: Julia Cartwright <julia@ni.com> Acked-by: Guenter Roeck <linux@roeck-us.net> [bigeasy: use only HRTIMER_MODE_REL_HARD] Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20191105144506.clyadjbvnn7b7b2m@linutronix.de Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-11-05 22:45:06 +08:00
hrtimer_init(&wd_data->timer, CLOCK_MONOTONIC, HRTIMER_MODE_REL_HARD);
wd_data->timer.function = watchdog_timer_expired;
if (wdd->id == 0) {
watchdog: Separate and maintain variables based on variable lifetime All variables required by the watchdog core to manage a watchdog are currently stored in struct watchdog_device. The lifetime of those variables is determined by the watchdog driver. However, the lifetime of variables used by the watchdog core differs from the lifetime of struct watchdog_device. To remedy this situation, watchdog drivers can implement ref and unref callbacks, to be used by the watchdog core to lock struct watchdog_device in memory. While this solves the immediate problem, it depends on watchdog drivers to actually implement the ref/unref callbacks. This is error prone, often not implemented in the first place, or not implemented correctly. To solve the problem without requiring driver support, split the variables in struct watchdog_device into two data structures - one for variables associated with the watchdog driver, one for variables associated with the watchdog core. With this approach, the watchdog core can keep track of its variable lifetime and no longer depends on ref/unref callbacks in the driver. As a side effect, some of the variables originally in struct watchdog_driver are now private to the watchdog core and no longer visible in watchdog drivers. As a side effect of the changes made, an ioctl will now always fail with -ENODEV after a watchdog device was unregistered with the character device still open. Previously, it would only fail with -ENODEV in some situations. Also, ioctl operations are now atomic from driver perspective. With this change, it is now guaranteed that the driver will not unregister a watchdog between a timeout change and the subsequent ping. The 'ref' and 'unref' callbacks in struct watchdog_driver are no longer used and marked as deprecated. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-12-26 08:01:42 +08:00
old_wd_data = wd_data;
watchdog_miscdev.parent = wdd->parent;
err = misc_register(&watchdog_miscdev);
if (err != 0) {
pr_err("%s: cannot register miscdev on minor=%d (err=%d).\n",
wdd->info->identity, WATCHDOG_MINOR, err);
if (err == -EBUSY)
pr_err("%s: a legacy watchdog module is probably present.\n",
wdd->info->identity);
watchdog: Separate and maintain variables based on variable lifetime All variables required by the watchdog core to manage a watchdog are currently stored in struct watchdog_device. The lifetime of those variables is determined by the watchdog driver. However, the lifetime of variables used by the watchdog core differs from the lifetime of struct watchdog_device. To remedy this situation, watchdog drivers can implement ref and unref callbacks, to be used by the watchdog core to lock struct watchdog_device in memory. While this solves the immediate problem, it depends on watchdog drivers to actually implement the ref/unref callbacks. This is error prone, often not implemented in the first place, or not implemented correctly. To solve the problem without requiring driver support, split the variables in struct watchdog_device into two data structures - one for variables associated with the watchdog driver, one for variables associated with the watchdog core. With this approach, the watchdog core can keep track of its variable lifetime and no longer depends on ref/unref callbacks in the driver. As a side effect, some of the variables originally in struct watchdog_driver are now private to the watchdog core and no longer visible in watchdog drivers. As a side effect of the changes made, an ioctl will now always fail with -ENODEV after a watchdog device was unregistered with the character device still open. Previously, it would only fail with -ENODEV in some situations. Also, ioctl operations are now atomic from driver perspective. With this change, it is now guaranteed that the driver will not unregister a watchdog between a timeout change and the subsequent ping. The 'ref' and 'unref' callbacks in struct watchdog_driver are no longer used and marked as deprecated. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-12-26 08:01:42 +08:00
old_wd_data = NULL;
kfree(wd_data);
return err;
}
}
/* Fill in the data structures */
watchdog: Separate and maintain variables based on variable lifetime All variables required by the watchdog core to manage a watchdog are currently stored in struct watchdog_device. The lifetime of those variables is determined by the watchdog driver. However, the lifetime of variables used by the watchdog core differs from the lifetime of struct watchdog_device. To remedy this situation, watchdog drivers can implement ref and unref callbacks, to be used by the watchdog core to lock struct watchdog_device in memory. While this solves the immediate problem, it depends on watchdog drivers to actually implement the ref/unref callbacks. This is error prone, often not implemented in the first place, or not implemented correctly. To solve the problem without requiring driver support, split the variables in struct watchdog_device into two data structures - one for variables associated with the watchdog driver, one for variables associated with the watchdog core. With this approach, the watchdog core can keep track of its variable lifetime and no longer depends on ref/unref callbacks in the driver. As a side effect, some of the variables originally in struct watchdog_driver are now private to the watchdog core and no longer visible in watchdog drivers. As a side effect of the changes made, an ioctl will now always fail with -ENODEV after a watchdog device was unregistered with the character device still open. Previously, it would only fail with -ENODEV in some situations. Also, ioctl operations are now atomic from driver perspective. With this change, it is now guaranteed that the driver will not unregister a watchdog between a timeout change and the subsequent ping. The 'ref' and 'unref' callbacks in struct watchdog_driver are no longer used and marked as deprecated. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-12-26 08:01:42 +08:00
cdev_init(&wd_data->cdev, &watchdog_fops);
/* Add the device */
watchdog: Fix the race between the release of watchdog_core_data and cdev The struct cdev is embedded in the struct watchdog_core_data. In the current code, we manage the watchdog_core_data with a kref, but the cdev is manged by a kobject. There is no any relationship between this kref and kobject. So it is possible that the watchdog_core_data is freed before the cdev is entirely released. We can easily get the following call trace with CONFIG_DEBUG_KOBJECT_RELEASE and CONFIG_DEBUG_OBJECTS_TIMERS enabled. ODEBUG: free active (active state 0) object type: timer_list hint: delayed_work_timer_fn+0x0/0x38 WARNING: CPU: 23 PID: 1028 at lib/debugobjects.c:481 debug_print_object+0xb0/0xf0 Modules linked in: softdog(-) deflate ctr twofish_generic twofish_common camellia_generic serpent_generic blowfish_generic blowfish_common cast5_generic cast_common cmac xcbc af_key sch_fq_codel openvswitch nsh nf_conncount nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 CPU: 23 PID: 1028 Comm: modprobe Not tainted 5.3.0-next-20190924-yoctodev-standard+ #180 Hardware name: Marvell OcteonTX CN96XX board (DT) pstate: 00400009 (nzcv daif +PAN -UAO) pc : debug_print_object+0xb0/0xf0 lr : debug_print_object+0xb0/0xf0 sp : ffff80001cbcfc70 x29: ffff80001cbcfc70 x28: ffff800010ea2128 x27: ffff800010bad000 x26: 0000000000000000 x25: ffff80001103c640 x24: ffff80001107b268 x23: ffff800010bad9e8 x22: ffff800010ea2128 x21: ffff000bc2c62af8 x20: ffff80001103c600 x19: ffff800010e867d8 x18: 0000000000000060 x17: 0000000000000000 x16: 0000000000000000 x15: ffff000bd7240470 x14: 6e6968207473696c x13: 5f72656d6974203a x12: 6570797420746365 x11: 6a626f2029302065 x10: 7461747320657669 x9 : 7463612820657669 x8 : 3378302f3078302b x7 : 0000000000001d7a x6 : ffff800010fd5889 x5 : 0000000000000000 x4 : 0000000000000000 x3 : 0000000000000000 x2 : ffff000bff948548 x1 : 276a1c9e1edc2300 x0 : 0000000000000000 Call trace: debug_print_object+0xb0/0xf0 debug_check_no_obj_freed+0x1e8/0x210 kfree+0x1b8/0x368 watchdog_cdev_unregister+0x88/0xc8 watchdog_dev_unregister+0x38/0x48 watchdog_unregister_device+0xa8/0x100 softdog_exit+0x18/0xfec4 [softdog] __arm64_sys_delete_module+0x174/0x200 el0_svc_handler+0xd0/0x1c8 el0_svc+0x8/0xc This is a common issue when using cdev embedded in a struct. Fortunately, we already have a mechanism to solve this kind of issue. Please see commit 233ed09d7fda ("chardev: add helper function to register char devs with a struct device") for more detail. In this patch, we choose to embed the struct device into the watchdog_core_data, and use the API provided by the commit 233ed09d7fda to make sure that the release of watchdog_core_data and cdev are in sequence. Signed-off-by: Kevin Hao <haokexin@gmail.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20191008112934.29669-1-haokexin@gmail.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-10-08 19:29:34 +08:00
err = cdev_device_add(&wd_data->cdev, &wd_data->dev);
if (err) {
pr_err("watchdog%d unable to add device %d:%d\n",
wdd->id, MAJOR(watchdog_devt), wdd->id);
if (wdd->id == 0) {
misc_deregister(&watchdog_miscdev);
watchdog: Separate and maintain variables based on variable lifetime All variables required by the watchdog core to manage a watchdog are currently stored in struct watchdog_device. The lifetime of those variables is determined by the watchdog driver. However, the lifetime of variables used by the watchdog core differs from the lifetime of struct watchdog_device. To remedy this situation, watchdog drivers can implement ref and unref callbacks, to be used by the watchdog core to lock struct watchdog_device in memory. While this solves the immediate problem, it depends on watchdog drivers to actually implement the ref/unref callbacks. This is error prone, often not implemented in the first place, or not implemented correctly. To solve the problem without requiring driver support, split the variables in struct watchdog_device into two data structures - one for variables associated with the watchdog driver, one for variables associated with the watchdog core. With this approach, the watchdog core can keep track of its variable lifetime and no longer depends on ref/unref callbacks in the driver. As a side effect, some of the variables originally in struct watchdog_driver are now private to the watchdog core and no longer visible in watchdog drivers. As a side effect of the changes made, an ioctl will now always fail with -ENODEV after a watchdog device was unregistered with the character device still open. Previously, it would only fail with -ENODEV in some situations. Also, ioctl operations are now atomic from driver perspective. With this change, it is now guaranteed that the driver will not unregister a watchdog between a timeout change and the subsequent ping. The 'ref' and 'unref' callbacks in struct watchdog_driver are no longer used and marked as deprecated. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-12-26 08:01:42 +08:00
old_wd_data = NULL;
watchdog: Fix the race between the release of watchdog_core_data and cdev The struct cdev is embedded in the struct watchdog_core_data. In the current code, we manage the watchdog_core_data with a kref, but the cdev is manged by a kobject. There is no any relationship between this kref and kobject. So it is possible that the watchdog_core_data is freed before the cdev is entirely released. We can easily get the following call trace with CONFIG_DEBUG_KOBJECT_RELEASE and CONFIG_DEBUG_OBJECTS_TIMERS enabled. ODEBUG: free active (active state 0) object type: timer_list hint: delayed_work_timer_fn+0x0/0x38 WARNING: CPU: 23 PID: 1028 at lib/debugobjects.c:481 debug_print_object+0xb0/0xf0 Modules linked in: softdog(-) deflate ctr twofish_generic twofish_common camellia_generic serpent_generic blowfish_generic blowfish_common cast5_generic cast_common cmac xcbc af_key sch_fq_codel openvswitch nsh nf_conncount nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 CPU: 23 PID: 1028 Comm: modprobe Not tainted 5.3.0-next-20190924-yoctodev-standard+ #180 Hardware name: Marvell OcteonTX CN96XX board (DT) pstate: 00400009 (nzcv daif +PAN -UAO) pc : debug_print_object+0xb0/0xf0 lr : debug_print_object+0xb0/0xf0 sp : ffff80001cbcfc70 x29: ffff80001cbcfc70 x28: ffff800010ea2128 x27: ffff800010bad000 x26: 0000000000000000 x25: ffff80001103c640 x24: ffff80001107b268 x23: ffff800010bad9e8 x22: ffff800010ea2128 x21: ffff000bc2c62af8 x20: ffff80001103c600 x19: ffff800010e867d8 x18: 0000000000000060 x17: 0000000000000000 x16: 0000000000000000 x15: ffff000bd7240470 x14: 6e6968207473696c x13: 5f72656d6974203a x12: 6570797420746365 x11: 6a626f2029302065 x10: 7461747320657669 x9 : 7463612820657669 x8 : 3378302f3078302b x7 : 0000000000001d7a x6 : ffff800010fd5889 x5 : 0000000000000000 x4 : 0000000000000000 x3 : 0000000000000000 x2 : ffff000bff948548 x1 : 276a1c9e1edc2300 x0 : 0000000000000000 Call trace: debug_print_object+0xb0/0xf0 debug_check_no_obj_freed+0x1e8/0x210 kfree+0x1b8/0x368 watchdog_cdev_unregister+0x88/0xc8 watchdog_dev_unregister+0x38/0x48 watchdog_unregister_device+0xa8/0x100 softdog_exit+0x18/0xfec4 [softdog] __arm64_sys_delete_module+0x174/0x200 el0_svc_handler+0xd0/0x1c8 el0_svc+0x8/0xc This is a common issue when using cdev embedded in a struct. Fortunately, we already have a mechanism to solve this kind of issue. Please see commit 233ed09d7fda ("chardev: add helper function to register char devs with a struct device") for more detail. In this patch, we choose to embed the struct device into the watchdog_core_data, and use the API provided by the commit 233ed09d7fda to make sure that the release of watchdog_core_data and cdev are in sequence. Signed-off-by: Kevin Hao <haokexin@gmail.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20191008112934.29669-1-haokexin@gmail.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-10-08 19:29:34 +08:00
put_device(&wd_data->dev);
}
return err;
}
watchdog: Fix the race between the release of watchdog_core_data and cdev The struct cdev is embedded in the struct watchdog_core_data. In the current code, we manage the watchdog_core_data with a kref, but the cdev is manged by a kobject. There is no any relationship between this kref and kobject. So it is possible that the watchdog_core_data is freed before the cdev is entirely released. We can easily get the following call trace with CONFIG_DEBUG_KOBJECT_RELEASE and CONFIG_DEBUG_OBJECTS_TIMERS enabled. ODEBUG: free active (active state 0) object type: timer_list hint: delayed_work_timer_fn+0x0/0x38 WARNING: CPU: 23 PID: 1028 at lib/debugobjects.c:481 debug_print_object+0xb0/0xf0 Modules linked in: softdog(-) deflate ctr twofish_generic twofish_common camellia_generic serpent_generic blowfish_generic blowfish_common cast5_generic cast_common cmac xcbc af_key sch_fq_codel openvswitch nsh nf_conncount nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 CPU: 23 PID: 1028 Comm: modprobe Not tainted 5.3.0-next-20190924-yoctodev-standard+ #180 Hardware name: Marvell OcteonTX CN96XX board (DT) pstate: 00400009 (nzcv daif +PAN -UAO) pc : debug_print_object+0xb0/0xf0 lr : debug_print_object+0xb0/0xf0 sp : ffff80001cbcfc70 x29: ffff80001cbcfc70 x28: ffff800010ea2128 x27: ffff800010bad000 x26: 0000000000000000 x25: ffff80001103c640 x24: ffff80001107b268 x23: ffff800010bad9e8 x22: ffff800010ea2128 x21: ffff000bc2c62af8 x20: ffff80001103c600 x19: ffff800010e867d8 x18: 0000000000000060 x17: 0000000000000000 x16: 0000000000000000 x15: ffff000bd7240470 x14: 6e6968207473696c x13: 5f72656d6974203a x12: 6570797420746365 x11: 6a626f2029302065 x10: 7461747320657669 x9 : 7463612820657669 x8 : 3378302f3078302b x7 : 0000000000001d7a x6 : ffff800010fd5889 x5 : 0000000000000000 x4 : 0000000000000000 x3 : 0000000000000000 x2 : ffff000bff948548 x1 : 276a1c9e1edc2300 x0 : 0000000000000000 Call trace: debug_print_object+0xb0/0xf0 debug_check_no_obj_freed+0x1e8/0x210 kfree+0x1b8/0x368 watchdog_cdev_unregister+0x88/0xc8 watchdog_dev_unregister+0x38/0x48 watchdog_unregister_device+0xa8/0x100 softdog_exit+0x18/0xfec4 [softdog] __arm64_sys_delete_module+0x174/0x200 el0_svc_handler+0xd0/0x1c8 el0_svc+0x8/0xc This is a common issue when using cdev embedded in a struct. Fortunately, we already have a mechanism to solve this kind of issue. Please see commit 233ed09d7fda ("chardev: add helper function to register char devs with a struct device") for more detail. In this patch, we choose to embed the struct device into the watchdog_core_data, and use the API provided by the commit 233ed09d7fda to make sure that the release of watchdog_core_data and cdev are in sequence. Signed-off-by: Kevin Hao <haokexin@gmail.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20191008112934.29669-1-haokexin@gmail.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-10-08 19:29:34 +08:00
wd_data->cdev.owner = wdd->ops->owner;
/* Record time of most recent heartbeat as 'just before now'. */
wd_data->last_hw_keepalive = ktime_sub(ktime_get(), 1);
watchdog: introduce watchdog.open_timeout commandline parameter The watchdog framework takes care of feeding a hardware watchdog until userspace opens /dev/watchdogN. If that never happens for some reason (buggy init script, corrupt root filesystem or whatnot) but the kernel itself is fine, the machine stays up indefinitely. This patch allows setting an upper limit for how long the kernel will take care of the watchdog, thus ensuring that the watchdog will eventually reset the machine. A value of 0 (the default) means infinite timeout, preserving the current behaviour. This is particularly useful for embedded devices where some fallback logic is implemented in the bootloader (e.g., use a different root partition, boot from network, ...). There is already handle_boot_enabled serving a similar purpose. However, such a binary choice is unsuitable if the hardware watchdog cannot be programmed by the bootloader to provide a timeout long enough for userspace to get up and running. Many of the embedded devices we see use external (gpio-triggered) watchdogs with a fixed timeout of the order of 1-2 seconds. The open timeout only applies for the first open from userspace. Should userspace need to close the watchdog device, with the intention of re-opening it shortly, the application can emulate the open timeout feature by combining the nowayout feature with an appropriate WDIOC_SETTIMEOUT immediately prior to closing the device. Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-06-05 22:06:41 +08:00
watchdog_set_open_deadline(wd_data);
/*
* If the watchdog is running, prevent its driver from being unloaded,
* and schedule an immediate ping.
*/
if (watchdog_hw_running(wdd)) {
__module_get(wdd->ops->owner);
watchdog: Fix the race between the release of watchdog_core_data and cdev The struct cdev is embedded in the struct watchdog_core_data. In the current code, we manage the watchdog_core_data with a kref, but the cdev is manged by a kobject. There is no any relationship between this kref and kobject. So it is possible that the watchdog_core_data is freed before the cdev is entirely released. We can easily get the following call trace with CONFIG_DEBUG_KOBJECT_RELEASE and CONFIG_DEBUG_OBJECTS_TIMERS enabled. ODEBUG: free active (active state 0) object type: timer_list hint: delayed_work_timer_fn+0x0/0x38 WARNING: CPU: 23 PID: 1028 at lib/debugobjects.c:481 debug_print_object+0xb0/0xf0 Modules linked in: softdog(-) deflate ctr twofish_generic twofish_common camellia_generic serpent_generic blowfish_generic blowfish_common cast5_generic cast_common cmac xcbc af_key sch_fq_codel openvswitch nsh nf_conncount nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 CPU: 23 PID: 1028 Comm: modprobe Not tainted 5.3.0-next-20190924-yoctodev-standard+ #180 Hardware name: Marvell OcteonTX CN96XX board (DT) pstate: 00400009 (nzcv daif +PAN -UAO) pc : debug_print_object+0xb0/0xf0 lr : debug_print_object+0xb0/0xf0 sp : ffff80001cbcfc70 x29: ffff80001cbcfc70 x28: ffff800010ea2128 x27: ffff800010bad000 x26: 0000000000000000 x25: ffff80001103c640 x24: ffff80001107b268 x23: ffff800010bad9e8 x22: ffff800010ea2128 x21: ffff000bc2c62af8 x20: ffff80001103c600 x19: ffff800010e867d8 x18: 0000000000000060 x17: 0000000000000000 x16: 0000000000000000 x15: ffff000bd7240470 x14: 6e6968207473696c x13: 5f72656d6974203a x12: 6570797420746365 x11: 6a626f2029302065 x10: 7461747320657669 x9 : 7463612820657669 x8 : 3378302f3078302b x7 : 0000000000001d7a x6 : ffff800010fd5889 x5 : 0000000000000000 x4 : 0000000000000000 x3 : 0000000000000000 x2 : ffff000bff948548 x1 : 276a1c9e1edc2300 x0 : 0000000000000000 Call trace: debug_print_object+0xb0/0xf0 debug_check_no_obj_freed+0x1e8/0x210 kfree+0x1b8/0x368 watchdog_cdev_unregister+0x88/0xc8 watchdog_dev_unregister+0x38/0x48 watchdog_unregister_device+0xa8/0x100 softdog_exit+0x18/0xfec4 [softdog] __arm64_sys_delete_module+0x174/0x200 el0_svc_handler+0xd0/0x1c8 el0_svc+0x8/0xc This is a common issue when using cdev embedded in a struct. Fortunately, we already have a mechanism to solve this kind of issue. Please see commit 233ed09d7fda ("chardev: add helper function to register char devs with a struct device") for more detail. In this patch, we choose to embed the struct device into the watchdog_core_data, and use the API provided by the commit 233ed09d7fda to make sure that the release of watchdog_core_data and cdev are in sequence. Signed-off-by: Kevin Hao <haokexin@gmail.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20191008112934.29669-1-haokexin@gmail.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-10-08 19:29:34 +08:00
get_device(&wd_data->dev);
if (handle_boot_enabled)
watchdog: prevent deferral of watchdogd wakeup on RT When PREEMPT_RT is enabled, all hrtimer expiry functions are deferred for execution into the context of ksoftirqd unless otherwise annotated. Deferring the expiry of the hrtimer used by the watchdog core, however, is a waste, as the callback does nothing but queue a kthread work item and wakeup watchdogd. It's worst then that, too: the deferral through ksoftirqd also means that for correct behavior a user must adjust the scheduling parameters of both watchdogd _and_ ksoftirqd, which is unnecessary and has other side effects (like causing unrelated expiry functions to execute at potentially elevated priority). Instead, mark the hrtimer used by the watchdog core as being _HARD to allow it's execution directly from hardirq context. The work done in this expiry function is well-bounded and minimal. A user still must adjust the scheduling parameters of the watchdogd to be correct w.r.t. their application needs. Link: https://lkml.kernel.org/r/0e02d8327aeca344096c246713033887bc490dd7.1538089180.git.julia@ni.com Cc: Guenter Roeck <linux@roeck-us.net> Reported-and-tested-by: Steffen Trumtrar <s.trumtrar@pengutronix.de> Reported-by: Tim Sander <tim@krieglstein.org> Signed-off-by: Julia Cartwright <julia@ni.com> Acked-by: Guenter Roeck <linux@roeck-us.net> [bigeasy: use only HRTIMER_MODE_REL_HARD] Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20191105144506.clyadjbvnn7b7b2m@linutronix.de Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-11-05 22:45:06 +08:00
hrtimer_start(&wd_data->timer, 0,
HRTIMER_MODE_REL_HARD);
else
pr_info("watchdog%d running and kernel based pre-userspace handler disabled\n",
wdd->id);
}
return 0;
}
/*
* watchdog_cdev_unregister: unregister watchdog character device
* @watchdog: watchdog device
*
* Unregister watchdog character device and if needed the legacy
* /dev/watchdog device.
*/
static void watchdog_cdev_unregister(struct watchdog_device *wdd)
{
watchdog: Separate and maintain variables based on variable lifetime All variables required by the watchdog core to manage a watchdog are currently stored in struct watchdog_device. The lifetime of those variables is determined by the watchdog driver. However, the lifetime of variables used by the watchdog core differs from the lifetime of struct watchdog_device. To remedy this situation, watchdog drivers can implement ref and unref callbacks, to be used by the watchdog core to lock struct watchdog_device in memory. While this solves the immediate problem, it depends on watchdog drivers to actually implement the ref/unref callbacks. This is error prone, often not implemented in the first place, or not implemented correctly. To solve the problem without requiring driver support, split the variables in struct watchdog_device into two data structures - one for variables associated with the watchdog driver, one for variables associated with the watchdog core. With this approach, the watchdog core can keep track of its variable lifetime and no longer depends on ref/unref callbacks in the driver. As a side effect, some of the variables originally in struct watchdog_driver are now private to the watchdog core and no longer visible in watchdog drivers. As a side effect of the changes made, an ioctl will now always fail with -ENODEV after a watchdog device was unregistered with the character device still open. Previously, it would only fail with -ENODEV in some situations. Also, ioctl operations are now atomic from driver perspective. With this change, it is now guaranteed that the driver will not unregister a watchdog between a timeout change and the subsequent ping. The 'ref' and 'unref' callbacks in struct watchdog_driver are no longer used and marked as deprecated. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-12-26 08:01:42 +08:00
struct watchdog_core_data *wd_data = wdd->wd_data;
watchdog: Fix the race between the release of watchdog_core_data and cdev The struct cdev is embedded in the struct watchdog_core_data. In the current code, we manage the watchdog_core_data with a kref, but the cdev is manged by a kobject. There is no any relationship between this kref and kobject. So it is possible that the watchdog_core_data is freed before the cdev is entirely released. We can easily get the following call trace with CONFIG_DEBUG_KOBJECT_RELEASE and CONFIG_DEBUG_OBJECTS_TIMERS enabled. ODEBUG: free active (active state 0) object type: timer_list hint: delayed_work_timer_fn+0x0/0x38 WARNING: CPU: 23 PID: 1028 at lib/debugobjects.c:481 debug_print_object+0xb0/0xf0 Modules linked in: softdog(-) deflate ctr twofish_generic twofish_common camellia_generic serpent_generic blowfish_generic blowfish_common cast5_generic cast_common cmac xcbc af_key sch_fq_codel openvswitch nsh nf_conncount nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 CPU: 23 PID: 1028 Comm: modprobe Not tainted 5.3.0-next-20190924-yoctodev-standard+ #180 Hardware name: Marvell OcteonTX CN96XX board (DT) pstate: 00400009 (nzcv daif +PAN -UAO) pc : debug_print_object+0xb0/0xf0 lr : debug_print_object+0xb0/0xf0 sp : ffff80001cbcfc70 x29: ffff80001cbcfc70 x28: ffff800010ea2128 x27: ffff800010bad000 x26: 0000000000000000 x25: ffff80001103c640 x24: ffff80001107b268 x23: ffff800010bad9e8 x22: ffff800010ea2128 x21: ffff000bc2c62af8 x20: ffff80001103c600 x19: ffff800010e867d8 x18: 0000000000000060 x17: 0000000000000000 x16: 0000000000000000 x15: ffff000bd7240470 x14: 6e6968207473696c x13: 5f72656d6974203a x12: 6570797420746365 x11: 6a626f2029302065 x10: 7461747320657669 x9 : 7463612820657669 x8 : 3378302f3078302b x7 : 0000000000001d7a x6 : ffff800010fd5889 x5 : 0000000000000000 x4 : 0000000000000000 x3 : 0000000000000000 x2 : ffff000bff948548 x1 : 276a1c9e1edc2300 x0 : 0000000000000000 Call trace: debug_print_object+0xb0/0xf0 debug_check_no_obj_freed+0x1e8/0x210 kfree+0x1b8/0x368 watchdog_cdev_unregister+0x88/0xc8 watchdog_dev_unregister+0x38/0x48 watchdog_unregister_device+0xa8/0x100 softdog_exit+0x18/0xfec4 [softdog] __arm64_sys_delete_module+0x174/0x200 el0_svc_handler+0xd0/0x1c8 el0_svc+0x8/0xc This is a common issue when using cdev embedded in a struct. Fortunately, we already have a mechanism to solve this kind of issue. Please see commit 233ed09d7fda ("chardev: add helper function to register char devs with a struct device") for more detail. In this patch, we choose to embed the struct device into the watchdog_core_data, and use the API provided by the commit 233ed09d7fda to make sure that the release of watchdog_core_data and cdev are in sequence. Signed-off-by: Kevin Hao <haokexin@gmail.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20191008112934.29669-1-haokexin@gmail.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-10-08 19:29:34 +08:00
cdev_device_del(&wd_data->cdev, &wd_data->dev);
if (wdd->id == 0) {
misc_deregister(&watchdog_miscdev);
watchdog: Separate and maintain variables based on variable lifetime All variables required by the watchdog core to manage a watchdog are currently stored in struct watchdog_device. The lifetime of those variables is determined by the watchdog driver. However, the lifetime of variables used by the watchdog core differs from the lifetime of struct watchdog_device. To remedy this situation, watchdog drivers can implement ref and unref callbacks, to be used by the watchdog core to lock struct watchdog_device in memory. While this solves the immediate problem, it depends on watchdog drivers to actually implement the ref/unref callbacks. This is error prone, often not implemented in the first place, or not implemented correctly. To solve the problem without requiring driver support, split the variables in struct watchdog_device into two data structures - one for variables associated with the watchdog driver, one for variables associated with the watchdog core. With this approach, the watchdog core can keep track of its variable lifetime and no longer depends on ref/unref callbacks in the driver. As a side effect, some of the variables originally in struct watchdog_driver are now private to the watchdog core and no longer visible in watchdog drivers. As a side effect of the changes made, an ioctl will now always fail with -ENODEV after a watchdog device was unregistered with the character device still open. Previously, it would only fail with -ENODEV in some situations. Also, ioctl operations are now atomic from driver perspective. With this change, it is now guaranteed that the driver will not unregister a watchdog between a timeout change and the subsequent ping. The 'ref' and 'unref' callbacks in struct watchdog_driver are no longer used and marked as deprecated. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-12-26 08:01:42 +08:00
old_wd_data = NULL;
}
watchdog: Separate and maintain variables based on variable lifetime All variables required by the watchdog core to manage a watchdog are currently stored in struct watchdog_device. The lifetime of those variables is determined by the watchdog driver. However, the lifetime of variables used by the watchdog core differs from the lifetime of struct watchdog_device. To remedy this situation, watchdog drivers can implement ref and unref callbacks, to be used by the watchdog core to lock struct watchdog_device in memory. While this solves the immediate problem, it depends on watchdog drivers to actually implement the ref/unref callbacks. This is error prone, often not implemented in the first place, or not implemented correctly. To solve the problem without requiring driver support, split the variables in struct watchdog_device into two data structures - one for variables associated with the watchdog driver, one for variables associated with the watchdog core. With this approach, the watchdog core can keep track of its variable lifetime and no longer depends on ref/unref callbacks in the driver. As a side effect, some of the variables originally in struct watchdog_driver are now private to the watchdog core and no longer visible in watchdog drivers. As a side effect of the changes made, an ioctl will now always fail with -ENODEV after a watchdog device was unregistered with the character device still open. Previously, it would only fail with -ENODEV in some situations. Also, ioctl operations are now atomic from driver perspective. With this change, it is now guaranteed that the driver will not unregister a watchdog between a timeout change and the subsequent ping. The 'ref' and 'unref' callbacks in struct watchdog_driver are no longer used and marked as deprecated. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-12-26 08:01:42 +08:00
if (watchdog_active(wdd) &&
test_bit(WDOG_STOP_ON_UNREGISTER, &wdd->status)) {
watchdog_stop(wdd);
}
mutex_lock(&wd_data->lock);
wd_data->wdd = NULL;
wdd->wd_data = NULL;
mutex_unlock(&wd_data->lock);
hrtimer_cancel(&wd_data->timer);
kthread_cancel_work_sync(&wd_data->work);
watchdog: Fix the race between the release of watchdog_core_data and cdev The struct cdev is embedded in the struct watchdog_core_data. In the current code, we manage the watchdog_core_data with a kref, but the cdev is manged by a kobject. There is no any relationship between this kref and kobject. So it is possible that the watchdog_core_data is freed before the cdev is entirely released. We can easily get the following call trace with CONFIG_DEBUG_KOBJECT_RELEASE and CONFIG_DEBUG_OBJECTS_TIMERS enabled. ODEBUG: free active (active state 0) object type: timer_list hint: delayed_work_timer_fn+0x0/0x38 WARNING: CPU: 23 PID: 1028 at lib/debugobjects.c:481 debug_print_object+0xb0/0xf0 Modules linked in: softdog(-) deflate ctr twofish_generic twofish_common camellia_generic serpent_generic blowfish_generic blowfish_common cast5_generic cast_common cmac xcbc af_key sch_fq_codel openvswitch nsh nf_conncount nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 CPU: 23 PID: 1028 Comm: modprobe Not tainted 5.3.0-next-20190924-yoctodev-standard+ #180 Hardware name: Marvell OcteonTX CN96XX board (DT) pstate: 00400009 (nzcv daif +PAN -UAO) pc : debug_print_object+0xb0/0xf0 lr : debug_print_object+0xb0/0xf0 sp : ffff80001cbcfc70 x29: ffff80001cbcfc70 x28: ffff800010ea2128 x27: ffff800010bad000 x26: 0000000000000000 x25: ffff80001103c640 x24: ffff80001107b268 x23: ffff800010bad9e8 x22: ffff800010ea2128 x21: ffff000bc2c62af8 x20: ffff80001103c600 x19: ffff800010e867d8 x18: 0000000000000060 x17: 0000000000000000 x16: 0000000000000000 x15: ffff000bd7240470 x14: 6e6968207473696c x13: 5f72656d6974203a x12: 6570797420746365 x11: 6a626f2029302065 x10: 7461747320657669 x9 : 7463612820657669 x8 : 3378302f3078302b x7 : 0000000000001d7a x6 : ffff800010fd5889 x5 : 0000000000000000 x4 : 0000000000000000 x3 : 0000000000000000 x2 : ffff000bff948548 x1 : 276a1c9e1edc2300 x0 : 0000000000000000 Call trace: debug_print_object+0xb0/0xf0 debug_check_no_obj_freed+0x1e8/0x210 kfree+0x1b8/0x368 watchdog_cdev_unregister+0x88/0xc8 watchdog_dev_unregister+0x38/0x48 watchdog_unregister_device+0xa8/0x100 softdog_exit+0x18/0xfec4 [softdog] __arm64_sys_delete_module+0x174/0x200 el0_svc_handler+0xd0/0x1c8 el0_svc+0x8/0xc This is a common issue when using cdev embedded in a struct. Fortunately, we already have a mechanism to solve this kind of issue. Please see commit 233ed09d7fda ("chardev: add helper function to register char devs with a struct device") for more detail. In this patch, we choose to embed the struct device into the watchdog_core_data, and use the API provided by the commit 233ed09d7fda to make sure that the release of watchdog_core_data and cdev are in sequence. Signed-off-by: Kevin Hao <haokexin@gmail.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20191008112934.29669-1-haokexin@gmail.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-10-08 19:29:34 +08:00
put_device(&wd_data->dev);
}
/*
* watchdog_dev_register: register a watchdog device
* @wdd: watchdog device
*
* Register a watchdog device including handling the legacy
* /dev/watchdog node. /dev/watchdog is actually a miscdevice and
* thus we set it up like that.
*/
int watchdog_dev_register(struct watchdog_device *wdd)
{
int ret;
watchdog: Fix the race between the release of watchdog_core_data and cdev The struct cdev is embedded in the struct watchdog_core_data. In the current code, we manage the watchdog_core_data with a kref, but the cdev is manged by a kobject. There is no any relationship between this kref and kobject. So it is possible that the watchdog_core_data is freed before the cdev is entirely released. We can easily get the following call trace with CONFIG_DEBUG_KOBJECT_RELEASE and CONFIG_DEBUG_OBJECTS_TIMERS enabled. ODEBUG: free active (active state 0) object type: timer_list hint: delayed_work_timer_fn+0x0/0x38 WARNING: CPU: 23 PID: 1028 at lib/debugobjects.c:481 debug_print_object+0xb0/0xf0 Modules linked in: softdog(-) deflate ctr twofish_generic twofish_common camellia_generic serpent_generic blowfish_generic blowfish_common cast5_generic cast_common cmac xcbc af_key sch_fq_codel openvswitch nsh nf_conncount nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 CPU: 23 PID: 1028 Comm: modprobe Not tainted 5.3.0-next-20190924-yoctodev-standard+ #180 Hardware name: Marvell OcteonTX CN96XX board (DT) pstate: 00400009 (nzcv daif +PAN -UAO) pc : debug_print_object+0xb0/0xf0 lr : debug_print_object+0xb0/0xf0 sp : ffff80001cbcfc70 x29: ffff80001cbcfc70 x28: ffff800010ea2128 x27: ffff800010bad000 x26: 0000000000000000 x25: ffff80001103c640 x24: ffff80001107b268 x23: ffff800010bad9e8 x22: ffff800010ea2128 x21: ffff000bc2c62af8 x20: ffff80001103c600 x19: ffff800010e867d8 x18: 0000000000000060 x17: 0000000000000000 x16: 0000000000000000 x15: ffff000bd7240470 x14: 6e6968207473696c x13: 5f72656d6974203a x12: 6570797420746365 x11: 6a626f2029302065 x10: 7461747320657669 x9 : 7463612820657669 x8 : 3378302f3078302b x7 : 0000000000001d7a x6 : ffff800010fd5889 x5 : 0000000000000000 x4 : 0000000000000000 x3 : 0000000000000000 x2 : ffff000bff948548 x1 : 276a1c9e1edc2300 x0 : 0000000000000000 Call trace: debug_print_object+0xb0/0xf0 debug_check_no_obj_freed+0x1e8/0x210 kfree+0x1b8/0x368 watchdog_cdev_unregister+0x88/0xc8 watchdog_dev_unregister+0x38/0x48 watchdog_unregister_device+0xa8/0x100 softdog_exit+0x18/0xfec4 [softdog] __arm64_sys_delete_module+0x174/0x200 el0_svc_handler+0xd0/0x1c8 el0_svc+0x8/0xc This is a common issue when using cdev embedded in a struct. Fortunately, we already have a mechanism to solve this kind of issue. Please see commit 233ed09d7fda ("chardev: add helper function to register char devs with a struct device") for more detail. In this patch, we choose to embed the struct device into the watchdog_core_data, and use the API provided by the commit 233ed09d7fda to make sure that the release of watchdog_core_data and cdev are in sequence. Signed-off-by: Kevin Hao <haokexin@gmail.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20191008112934.29669-1-haokexin@gmail.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-10-08 19:29:34 +08:00
ret = watchdog_cdev_register(wdd);
if (ret)
return ret;
ret = watchdog_register_pretimeout(wdd);
watchdog: fix UAF in reboot notifier handling in watchdog core code After the commit 44ea39420fc9 ("drivers/watchdog: make use of devm_register_reboot_notifier()") the struct notifier_block reboot_nb in the struct watchdog_device is removed from the reboot notifiers chain at the time watchdog's chardev is closed. But at least in i6300esb.c case reboot_nb is embedded in the struct esb_dev which can be freed on its device removal and before the chardev is closed, thus UAF at reboot: [ 7.728581] esb_probe: esb_dev.watchdog_device ffff91316f91ab28 ts# uname -r note the address ^^^ 5.5.0-rc5-ae6088-wdog ts# ./openwdog0 & [1] 696 ts# opened /dev/watchdog0, sleeping 10s... ts# echo 1 > /sys/devices/pci0000\:00/0000\:00\:09.0/remove [ 178.086079] devres:rel_nodes: dev ffff91317668a0b0 data ffff91316f91ab28 esb_dev.watchdog_device.reboot_nb memory is freed here ^^^ ts# ...woken up [ 181.459010] devres:rel_nodes: dev ffff913171781000 data ffff913174a1dae8 [ 181.460195] devm_unreg_reboot_notifier: res ffff913174a1dae8 nb ffff91316f91ab78 attempt to use memory already freed ^^^ [ 181.461063] devm_unreg_reboot_notifier: nb->call 6b6b6b6b6b6b6b6b [ 181.461243] devm_unreg_reboot_notifier: nb->next 6b6b6b6b6b6b6b6b freed memory is filled with a slub poison ^^^ [1]+ Done ./openwdog0 ts# reboot [ 229.921862] systemd-shutdown[1]: Rebooting. [ 229.939265] notifier_call_chain: nb ffffffff9c6c2f20 nb->next ffffffff9c6d50c0 [ 229.943080] notifier_call_chain: nb ffffffff9c6d50c0 nb->next 6b6b6b6b6b6b6b6b [ 229.946054] notifier_call_chain: nb 6b6b6b6b6b6b6b6b INVAL [ 229.957584] general protection fault: 0000 [#1] SMP [ 229.958770] CPU: 0 PID: 1 Comm: systemd-shutdow Not tainted 5.5.0-rc5-ae6088-wdog [ 229.960224] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), ... [ 229.963288] RIP: 0010:notifier_call_chain+0x66/0xd0 [ 229.969082] RSP: 0018:ffffb20dc0013d88 EFLAGS: 00010246 [ 229.970812] RAX: 000000000000002e RBX: 6b6b6b6b6b6b6b6b RCX: 00000000000008b3 [ 229.972929] RDX: 0000000000000000 RSI: 0000000000000096 RDI: ffffffff9ccc46ac [ 229.975028] RBP: 0000000000000001 R08: 0000000000000000 R09: 00000000000008b3 [ 229.977039] R10: 0000000000000001 R11: ffffffff9c26c740 R12: 0000000000000000 [ 229.979155] R13: 6b6b6b6b6b6b6b6b R14: 0000000000000000 R15: 00000000fffffffa ... slub_debug=FZP poison ^^^ [ 229.989089] Call Trace: [ 229.990157] blocking_notifier_call_chain+0x43/0x59 [ 229.991401] kernel_restart_prepare+0x14/0x30 [ 229.992607] kernel_restart+0x9/0x30 [ 229.993800] __do_sys_reboot+0x1d2/0x210 [ 230.000149] do_syscall_64+0x3d/0x130 [ 230.001277] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 230.002639] RIP: 0033:0x7f5461bdd177 [ 230.016402] Modules linked in: i6300esb [ 230.050261] Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b Fix the crash by reverting 44ea39420fc9 so unregister_reboot_notifier() is called when watchdog device is removed. This also makes handling of the reboot notifier unified with the handling of the restart handler, which is freed with unregister_restart_handler() in the same place. Fixes: 44ea39420fc9 ("drivers/watchdog: make use of devm_register_reboot_notifier()") Cc: stable@vger.kernel.org # v4.15+ Signed-off-by: Vladis Dronov <vdronov@redhat.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20200108125347.6067-1-vdronov@redhat.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2020-01-08 20:53:47 +08:00
if (ret)
watchdog_cdev_unregister(wdd);
return ret;
}
/*
* watchdog_dev_unregister: unregister a watchdog device
* @watchdog: watchdog device
*
* Unregister watchdog device and if needed the legacy
* /dev/watchdog device.
*/
void watchdog_dev_unregister(struct watchdog_device *wdd)
{
watchdog_unregister_pretimeout(wdd);
watchdog: Separate and maintain variables based on variable lifetime All variables required by the watchdog core to manage a watchdog are currently stored in struct watchdog_device. The lifetime of those variables is determined by the watchdog driver. However, the lifetime of variables used by the watchdog core differs from the lifetime of struct watchdog_device. To remedy this situation, watchdog drivers can implement ref and unref callbacks, to be used by the watchdog core to lock struct watchdog_device in memory. While this solves the immediate problem, it depends on watchdog drivers to actually implement the ref/unref callbacks. This is error prone, often not implemented in the first place, or not implemented correctly. To solve the problem without requiring driver support, split the variables in struct watchdog_device into two data structures - one for variables associated with the watchdog driver, one for variables associated with the watchdog core. With this approach, the watchdog core can keep track of its variable lifetime and no longer depends on ref/unref callbacks in the driver. As a side effect, some of the variables originally in struct watchdog_driver are now private to the watchdog core and no longer visible in watchdog drivers. As a side effect of the changes made, an ioctl will now always fail with -ENODEV after a watchdog device was unregistered with the character device still open. Previously, it would only fail with -ENODEV in some situations. Also, ioctl operations are now atomic from driver perspective. With this change, it is now guaranteed that the driver will not unregister a watchdog between a timeout change and the subsequent ping. The 'ref' and 'unref' callbacks in struct watchdog_driver are no longer used and marked as deprecated. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-12-26 08:01:42 +08:00
watchdog_cdev_unregister(wdd);
}
/*
* watchdog_set_last_hw_keepalive: set last HW keepalive time for watchdog
* @wdd: watchdog device
* @last_ping_ms: time since last HW heartbeat
*
* Adjusts the last known HW keepalive time for a watchdog timer.
* This is needed if the watchdog is already running when the probe
* function is called, and it can't be pinged immediately. This
* function must be called immediately after watchdog registration,
* and min_hw_heartbeat_ms must be set for this to be useful.
*/
int watchdog_set_last_hw_keepalive(struct watchdog_device *wdd,
unsigned int last_ping_ms)
{
struct watchdog_core_data *wd_data;
ktime_t now;
if (!wdd)
return -EINVAL;
wd_data = wdd->wd_data;
now = ktime_get();
wd_data->last_hw_keepalive = ktime_sub(now, ms_to_ktime(last_ping_ms));
return __watchdog_ping(wdd);
}
EXPORT_SYMBOL_GPL(watchdog_set_last_hw_keepalive);
/*
* watchdog_dev_init: init dev part of watchdog core
*
* Allocate a range of chardev nodes to use for watchdog devices
*/
int __init watchdog_dev_init(void)
{
int err;
watchdog_kworker = kthread_create_worker(0, "watchdogd");
if (IS_ERR(watchdog_kworker)) {
pr_err("Failed to create watchdog kworker\n");
return PTR_ERR(watchdog_kworker);
}
sched_set_fifo(watchdog_kworker->task);
err = class_register(&watchdog_class);
if (err < 0) {
pr_err("couldn't register class\n");
goto err_register;
}
err = alloc_chrdev_region(&watchdog_devt, 0, MAX_DOGS, "watchdog");
if (err < 0) {
pr_err("watchdog: unable to allocate char dev region\n");
goto err_alloc;
}
return 0;
err_alloc:
class_unregister(&watchdog_class);
err_register:
kthread_destroy_worker(watchdog_kworker);
return err;
}
/*
* watchdog_dev_exit: exit dev part of watchdog core
*
* Release the range of chardev nodes used for watchdog devices
*/
void __exit watchdog_dev_exit(void)
{
unregister_chrdev_region(watchdog_devt, MAX_DOGS);
class_unregister(&watchdog_class);
kthread_destroy_worker(watchdog_kworker);
}
module_param(handle_boot_enabled, bool, 0444);
MODULE_PARM_DESC(handle_boot_enabled,
"Watchdog core auto-updates boot enabled watchdogs before userspace takes over (default="
__MODULE_STRING(IS_ENABLED(CONFIG_WATCHDOG_HANDLE_BOOT_ENABLED)) ")");
watchdog: introduce watchdog.open_timeout commandline parameter The watchdog framework takes care of feeding a hardware watchdog until userspace opens /dev/watchdogN. If that never happens for some reason (buggy init script, corrupt root filesystem or whatnot) but the kernel itself is fine, the machine stays up indefinitely. This patch allows setting an upper limit for how long the kernel will take care of the watchdog, thus ensuring that the watchdog will eventually reset the machine. A value of 0 (the default) means infinite timeout, preserving the current behaviour. This is particularly useful for embedded devices where some fallback logic is implemented in the bootloader (e.g., use a different root partition, boot from network, ...). There is already handle_boot_enabled serving a similar purpose. However, such a binary choice is unsuitable if the hardware watchdog cannot be programmed by the bootloader to provide a timeout long enough for userspace to get up and running. Many of the embedded devices we see use external (gpio-triggered) watchdogs with a fixed timeout of the order of 1-2 seconds. The open timeout only applies for the first open from userspace. Should userspace need to close the watchdog device, with the intention of re-opening it shortly, the application can emulate the open timeout feature by combining the nowayout feature with an appropriate WDIOC_SETTIMEOUT immediately prior to closing the device. Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-06-05 22:06:41 +08:00
module_param(open_timeout, uint, 0644);
MODULE_PARM_DESC(open_timeout,
"Maximum time (in seconds, 0 means infinity) for userspace to take over a running watchdog (default="
__MODULE_STRING(CONFIG_WATCHDOG_OPEN_TIMEOUT) ")");