OpenCloudOS-Kernel/fs/ext4/ext4_jbd2.c

160 lines
4.1 KiB
C
Raw Normal View History

/*
* Interface between ext4 and JBD
*/
#include "ext4_jbd2.h"
#include <trace/events/ext4.h>
int __ext4_journal_get_write_access(const char *where, unsigned int line,
handle_t *handle, struct buffer_head *bh)
{
int err = 0;
if (ext4_handle_valid(handle)) {
err = jbd2_journal_get_write_access(handle, bh);
if (err)
ext4_journal_abort_handle(where, line, __func__, bh,
handle, err);
}
return err;
}
/*
* The ext4 forget function must perform a revoke if we are freeing data
* which has been journaled. Metadata (eg. indirect blocks) must be
* revoked in all cases.
*
* "bh" may be NULL: a metadata block may have been freed from memory
* but there may still be a record of it in the journal, and that record
* still needs to be revoked.
*
* If the handle isn't valid we're not journaling, but we still need to
* call into ext4_journal_revoke() to put the buffer head.
*/
int __ext4_forget(const char *where, unsigned int line, handle_t *handle,
int is_metadata, struct inode *inode,
struct buffer_head *bh, ext4_fsblk_t blocknr)
{
int err;
might_sleep();
trace_ext4_forget(inode, is_metadata, blocknr);
BUFFER_TRACE(bh, "enter");
jbd_debug(4, "forgetting bh %p: is_metadata = %d, mode %o, "
"data mode %x\n",
bh, is_metadata, inode->i_mode,
test_opt(inode->i_sb, DATA_FLAGS));
/* In the no journal case, we can just do a bforget and return */
if (!ext4_handle_valid(handle)) {
bforget(bh);
return 0;
}
/* Never use the revoke function if we are doing full data
* journaling: there is no need to, and a V1 superblock won't
* support it. Otherwise, only skip the revoke on un-journaled
* data blocks. */
if (test_opt(inode->i_sb, DATA_FLAGS) == EXT4_MOUNT_JOURNAL_DATA ||
(!is_metadata && !ext4_should_journal_data(inode))) {
if (bh) {
BUFFER_TRACE(bh, "call jbd2_journal_forget");
err = jbd2_journal_forget(handle, bh);
if (err)
ext4_journal_abort_handle(where, line, __func__,
bh, handle, err);
return err;
}
return 0;
}
/*
* data!=journal && (is_metadata || should_journal_data(inode))
*/
BUFFER_TRACE(bh, "call jbd2_journal_revoke");
err = jbd2_journal_revoke(handle, blocknr, bh);
if (err) {
ext4_journal_abort_handle(where, line, __func__,
bh, handle, err);
__ext4_abort(inode->i_sb, where, line,
"error %d when attempting revoke", err);
}
BUFFER_TRACE(bh, "exit");
return err;
}
int __ext4_journal_get_create_access(const char *where, unsigned int line,
handle_t *handle, struct buffer_head *bh)
{
int err = 0;
if (ext4_handle_valid(handle)) {
err = jbd2_journal_get_create_access(handle, bh);
if (err)
ext4_journal_abort_handle(where, line, __func__,
bh, handle, err);
}
return err;
}
int __ext4_handle_dirty_metadata(const char *where, unsigned int line,
handle_t *handle, struct inode *inode,
struct buffer_head *bh)
{
int err = 0;
if (ext4_handle_valid(handle)) {
err = jbd2_journal_dirty_metadata(handle, bh);
if (err) {
/* Errors can only happen if there is a bug */
handle->h_err = err;
__ext4_journal_stop(where, line, handle);
}
} else {
if (inode)
mark_buffer_dirty_inode(bh, inode);
else
mark_buffer_dirty(bh);
if (inode && inode_needs_sync(inode)) {
sync_dirty_buffer(bh);
if (buffer_req(bh) && !buffer_uptodate(bh)) {
struct ext4_super_block *es;
es = EXT4_SB(inode->i_sb)->s_es;
es->s_last_error_block =
cpu_to_le64(bh->b_blocknr);
ext4_error_inode(inode, where, line,
bh->b_blocknr,
"IO error syncing itable block");
err = -EIO;
}
}
}
return err;
}
int __ext4_handle_dirty_super(const char *where, unsigned int line,
handle_t *handle, struct super_block *sb)
{
struct buffer_head *bh = EXT4_SB(sb)->s_sbh;
int err = 0;
if (ext4_handle_valid(handle)) {
ext4_superblock_csum_set(sb,
(struct ext4_super_block *)bh->b_data);
err = jbd2_journal_dirty_metadata(handle, bh);
if (err)
ext4_journal_abort_handle(where, line, __func__,
bh, handle, err);
ext4: remove unnecessary superblock dirtying This patch changes the 'ext4_handle_dirty_super()' function which submits the superblock for I/O in the following cases: 1. When creating the first large file on a file system without EXT4_FEATURE_RO_COMPAT_LARGE_FILE feature. 2. When re-sizing the file-system. 3. When creating an xattr on a file-system without the EXT4_FEATURE_COMPAT_EXT_ATTR feature. If the file-system has journal enabled, the superblock is written via the journal. We do not modify this path. If the file-system has no journal, this function, falls back to just marking the superblock as dirty using the 's_dirt' superblock flag. This means that it delays the actual superblock I/O submission by 5 seconds (default setting). Namely, the 'sync_supers()' kernel thread will call 'ext4_write_super()' later and will actually submit the superblock for I/O. And this is the behavior this patch modifies: we stop using 's_dirt' and just mark the superblock buffer as dirty right away. Indeed, all 3 cases above are extremely rare and it does not add any value to delay the I/O submission for them. Note: 'ext4_handle_dirty_super()' executes '__ext4_handle_dirty_super()' with 'now = 0'. This patch basically makes the 'now' argument unneeded and it will be deleted in one of the next patches. This patch also removes 's_dirt' condition on the unmount path because we never set it anymore, so we should not test it. Tested using xfstests for both journalled and non-journalled ext4. Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu> Reviewed-by: Jan Kara <jack@suse.cz>
2012-07-23 08:33:31 +08:00
} else {
ext4_superblock_csum_set(sb,
(struct ext4_super_block *)bh->b_data);
mark_buffer_dirty(bh);
ext4: remove unnecessary superblock dirtying This patch changes the 'ext4_handle_dirty_super()' function which submits the superblock for I/O in the following cases: 1. When creating the first large file on a file system without EXT4_FEATURE_RO_COMPAT_LARGE_FILE feature. 2. When re-sizing the file-system. 3. When creating an xattr on a file-system without the EXT4_FEATURE_COMPAT_EXT_ATTR feature. If the file-system has journal enabled, the superblock is written via the journal. We do not modify this path. If the file-system has no journal, this function, falls back to just marking the superblock as dirty using the 's_dirt' superblock flag. This means that it delays the actual superblock I/O submission by 5 seconds (default setting). Namely, the 'sync_supers()' kernel thread will call 'ext4_write_super()' later and will actually submit the superblock for I/O. And this is the behavior this patch modifies: we stop using 's_dirt' and just mark the superblock buffer as dirty right away. Indeed, all 3 cases above are extremely rare and it does not add any value to delay the I/O submission for them. Note: 'ext4_handle_dirty_super()' executes '__ext4_handle_dirty_super()' with 'now = 0'. This patch basically makes the 'now' argument unneeded and it will be deleted in one of the next patches. This patch also removes 's_dirt' condition on the unmount path because we never set it anymore, so we should not test it. Tested using xfstests for both journalled and non-journalled ext4. Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu> Reviewed-by: Jan Kara <jack@suse.cz>
2012-07-23 08:33:31 +08:00
}
return err;
}