OpenCloudOS-Kernel/arch/powerpc/platforms/pseries/iommu.c

1365 lines
36 KiB
C
Raw Normal View History

/*
* Copyright (C) 2001 Mike Corrigan & Dave Engebretsen, IBM Corporation
*
* Rewrite, cleanup:
*
* Copyright (C) 2004 Olof Johansson <olof@lixom.net>, IBM Corporation
* Copyright (C) 2006 Olof Johansson <olof@lixom.net>
*
* Dynamic DMA mapping support, pSeries-specific parts, both SMP and LPAR.
*
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#include <linux/init.h>
#include <linux/types.h>
#include <linux/slab.h>
#include <linux/mm.h>
#include <linux/memblock.h>
#include <linux/spinlock.h>
#include <linux/string.h>
#include <linux/pci.h>
#include <linux/dma-mapping.h>
#include <linux/crash_dump.h>
#include <linux/memory.h>
#include <linux/of.h>
#include <linux/iommu.h>
#include <asm/io.h>
#include <asm/prom.h>
#include <asm/rtas.h>
#include <asm/iommu.h>
#include <asm/pci-bridge.h>
#include <asm/machdep.h>
#include <asm/firmware.h>
#include <asm/tce.h>
#include <asm/ppc-pci.h>
#include <asm/udbg.h>
#include <asm/mmzone.h>
#include <asm/plpar_wrappers.h>
#include "pseries.h"
static void iommu_pseries_free_table(struct iommu_table *tbl,
const char *node_name)
{
#ifdef CONFIG_IOMMU_API
if (tbl->it_group) {
iommu_group_put(tbl->it_group);
BUG_ON(tbl->it_group);
}
#endif
iommu_free_table(tbl, node_name);
}
static void tce_invalidate_pSeries_sw(struct iommu_table *tbl,
__be64 *startp, __be64 *endp)
{
u64 __iomem *invalidate = (u64 __iomem *)tbl->it_index;
unsigned long start, end, inc;
start = __pa(startp);
end = __pa(endp);
inc = L1_CACHE_BYTES; /* invalidate a cacheline of TCEs at a time */
/* If this is non-zero, change the format. We shift the
* address and or in the magic from the device tree. */
if (tbl->it_busno) {
start <<= 12;
end <<= 12;
inc <<= 12;
start |= tbl->it_busno;
end |= tbl->it_busno;
}
end |= inc - 1; /* round up end to be different than start */
mb(); /* Make sure TCEs in memory are written */
while (start <= end) {
out_be64(invalidate, start);
start += inc;
}
}
static int tce_build_pSeries(struct iommu_table *tbl, long index,
long npages, unsigned long uaddr,
enum dma_data_direction direction,
struct dma_attrs *attrs)
{
u64 proto_tce;
__be64 *tcep, *tces;
u64 rpn;
proto_tce = TCE_PCI_READ; // Read allowed
if (direction != DMA_TO_DEVICE)
proto_tce |= TCE_PCI_WRITE;
tces = tcep = ((__be64 *)tbl->it_base) + index;
while (npages--) {
/* can't move this out since we might cross MEMBLOCK boundary */
rpn = __pa(uaddr) >> TCE_SHIFT;
*tcep = cpu_to_be64(proto_tce | (rpn & TCE_RPN_MASK) << TCE_RPN_SHIFT);
uaddr += TCE_PAGE_SIZE;
tcep++;
}
if (tbl->it_type & TCE_PCI_SWINV_CREATE)
tce_invalidate_pSeries_sw(tbl, tces, tcep - 1);
return 0;
}
static void tce_free_pSeries(struct iommu_table *tbl, long index, long npages)
{
__be64 *tcep, *tces;
tces = tcep = ((__be64 *)tbl->it_base) + index;
while (npages--)
*(tcep++) = 0;
if (tbl->it_type & TCE_PCI_SWINV_FREE)
tce_invalidate_pSeries_sw(tbl, tces, tcep - 1);
}
static unsigned long tce_get_pseries(struct iommu_table *tbl, long index)
{
__be64 *tcep;
tcep = ((__be64 *)tbl->it_base) + index;
return be64_to_cpu(*tcep);
}
static void tce_free_pSeriesLP(struct iommu_table*, long, long);
static void tce_freemulti_pSeriesLP(struct iommu_table*, long, long);
static int tce_build_pSeriesLP(struct iommu_table *tbl, long tcenum,
long npages, unsigned long uaddr,
enum dma_data_direction direction,
struct dma_attrs *attrs)
{
u64 rc = 0;
u64 proto_tce, tce;
u64 rpn;
int ret = 0;
long tcenum_start = tcenum, npages_start = npages;
rpn = __pa(uaddr) >> TCE_SHIFT;
proto_tce = TCE_PCI_READ;
if (direction != DMA_TO_DEVICE)
proto_tce |= TCE_PCI_WRITE;
while (npages--) {
tce = proto_tce | (rpn & TCE_RPN_MASK) << TCE_RPN_SHIFT;
rc = plpar_tce_put((u64)tbl->it_index, (u64)tcenum << 12, tce);
if (unlikely(rc == H_NOT_ENOUGH_RESOURCES)) {
ret = (int)rc;
tce_free_pSeriesLP(tbl, tcenum_start,
(npages_start - (npages + 1)));
break;
}
if (rc && printk_ratelimit()) {
printk("tce_build_pSeriesLP: plpar_tce_put failed. rc=%lld\n", rc);
printk("\tindex = 0x%llx\n", (u64)tbl->it_index);
printk("\ttcenum = 0x%llx\n", (u64)tcenum);
printk("\ttce val = 0x%llx\n", tce );
dump_stack();
}
tcenum++;
rpn++;
}
return ret;
}
static DEFINE_PER_CPU(__be64 *, tce_page);
static int tce_buildmulti_pSeriesLP(struct iommu_table *tbl, long tcenum,
long npages, unsigned long uaddr,
enum dma_data_direction direction,
struct dma_attrs *attrs)
{
u64 rc = 0;
u64 proto_tce;
__be64 *tcep;
u64 rpn;
long l, limit;
long tcenum_start = tcenum, npages_start = npages;
int ret = 0;
unsigned long flags;
powerpc/iommu: Move tce_xxx callbacks from ppc_md to iommu_table This adds a iommu_table_ops struct and puts pointer to it into the iommu_table struct. This moves tce_build/tce_free/tce_get/tce_flush callbacks from ppc_md to the new struct where they really belong to. This adds the requirement for @it_ops to be initialized before calling iommu_init_table() to make sure that we do not leave any IOMMU table with iommu_table_ops uninitialized. This is not a parameter of iommu_init_table() though as there will be cases when iommu_init_table() will not be called on TCE tables, for example - VFIO. This does s/tce_build/set/, s/tce_free/clear/ and removes "tce_" redundant prefixes. This removes tce_xxx_rm handlers from ppc_md but does not add them to iommu_table_ops as this will be done later if we decide to support TCE hypercalls in real mode. This removes _vm callbacks as only virtual mode is supported by now so this also removes @rm parameter. For pSeries, this always uses tce_buildmulti_pSeriesLP/ tce_buildmulti_pSeriesLP. This changes multi callback to fall back to tce_build_pSeriesLP/tce_free_pSeriesLP if FW_FEATURE_MULTITCE is not present. The reason for this is we still have to support "multitce=off" boot parameter in disable_multitce() and we do not want to walk through all IOMMU tables in the system and replace "multi" callbacks with single ones. For powernv, this defines _ops per PHB type which are P5IOC2/IODA1/IODA2. This makes the callbacks for them public. Later patches will extend callbacks for IODA1/2. No change in behaviour is expected. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Gavin Shan <gwshan@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-06-05 14:35:06 +08:00
if ((npages == 1) || !firmware_has_feature(FW_FEATURE_MULTITCE)) {
return tce_build_pSeriesLP(tbl, tcenum, npages, uaddr,
direction, attrs);
}
local_irq_save(flags); /* to protect tcep and the page behind it */
powerpc: Replace __get_cpu_var uses This still has not been merged and now powerpc is the only arch that does not have this change. Sorry about missing linuxppc-dev before. V2->V2 - Fix up to work against 3.18-rc1 __get_cpu_var() is used for multiple purposes in the kernel source. One of them is address calculation via the form &__get_cpu_var(x). This calculates the address for the instance of the percpu variable of the current processor based on an offset. Other use cases are for storing and retrieving data from the current processors percpu area. __get_cpu_var() can be used as an lvalue when writing data or on the right side of an assignment. __get_cpu_var() is defined as : __get_cpu_var() always only does an address determination. However, store and retrieve operations could use a segment prefix (or global register on other platforms) to avoid the address calculation. this_cpu_write() and this_cpu_read() can directly take an offset into a percpu area and use optimized assembly code to read and write per cpu variables. This patch converts __get_cpu_var into either an explicit address calculation using this_cpu_ptr() or into a use of this_cpu operations that use the offset. Thereby address calculations are avoided and less registers are used when code is generated. At the end of the patch set all uses of __get_cpu_var have been removed so the macro is removed too. The patch set includes passes over all arches as well. Once these operations are used throughout then specialized macros can be defined in non -x86 arches as well in order to optimize per cpu access by f.e. using a global register that may be set to the per cpu base. Transformations done to __get_cpu_var() 1. Determine the address of the percpu instance of the current processor. DEFINE_PER_CPU(int, y); int *x = &__get_cpu_var(y); Converts to int *x = this_cpu_ptr(&y); 2. Same as #1 but this time an array structure is involved. DEFINE_PER_CPU(int, y[20]); int *x = __get_cpu_var(y); Converts to int *x = this_cpu_ptr(y); 3. Retrieve the content of the current processors instance of a per cpu variable. DEFINE_PER_CPU(int, y); int x = __get_cpu_var(y) Converts to int x = __this_cpu_read(y); 4. Retrieve the content of a percpu struct DEFINE_PER_CPU(struct mystruct, y); struct mystruct x = __get_cpu_var(y); Converts to memcpy(&x, this_cpu_ptr(&y), sizeof(x)); 5. Assignment to a per cpu variable DEFINE_PER_CPU(int, y) __get_cpu_var(y) = x; Converts to __this_cpu_write(y, x); 6. Increment/Decrement etc of a per cpu variable DEFINE_PER_CPU(int, y); __get_cpu_var(y)++ Converts to __this_cpu_inc(y) Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> CC: Paul Mackerras <paulus@samba.org> Signed-off-by: Christoph Lameter <cl@linux.com> [mpe: Fix build errors caused by set/or_softirq_pending(), and rework assignment in __set_breakpoint() to use memcpy().] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2014-10-22 04:23:25 +08:00
tcep = __this_cpu_read(tce_page);
/* This is safe to do since interrupts are off when we're called
* from iommu_alloc{,_sg}()
*/
if (!tcep) {
tcep = (__be64 *)__get_free_page(GFP_ATOMIC);
/* If allocation fails, fall back to the loop implementation */
if (!tcep) {
local_irq_restore(flags);
return tce_build_pSeriesLP(tbl, tcenum, npages, uaddr,
direction, attrs);
}
powerpc: Replace __get_cpu_var uses This still has not been merged and now powerpc is the only arch that does not have this change. Sorry about missing linuxppc-dev before. V2->V2 - Fix up to work against 3.18-rc1 __get_cpu_var() is used for multiple purposes in the kernel source. One of them is address calculation via the form &__get_cpu_var(x). This calculates the address for the instance of the percpu variable of the current processor based on an offset. Other use cases are for storing and retrieving data from the current processors percpu area. __get_cpu_var() can be used as an lvalue when writing data or on the right side of an assignment. __get_cpu_var() is defined as : __get_cpu_var() always only does an address determination. However, store and retrieve operations could use a segment prefix (or global register on other platforms) to avoid the address calculation. this_cpu_write() and this_cpu_read() can directly take an offset into a percpu area and use optimized assembly code to read and write per cpu variables. This patch converts __get_cpu_var into either an explicit address calculation using this_cpu_ptr() or into a use of this_cpu operations that use the offset. Thereby address calculations are avoided and less registers are used when code is generated. At the end of the patch set all uses of __get_cpu_var have been removed so the macro is removed too. The patch set includes passes over all arches as well. Once these operations are used throughout then specialized macros can be defined in non -x86 arches as well in order to optimize per cpu access by f.e. using a global register that may be set to the per cpu base. Transformations done to __get_cpu_var() 1. Determine the address of the percpu instance of the current processor. DEFINE_PER_CPU(int, y); int *x = &__get_cpu_var(y); Converts to int *x = this_cpu_ptr(&y); 2. Same as #1 but this time an array structure is involved. DEFINE_PER_CPU(int, y[20]); int *x = __get_cpu_var(y); Converts to int *x = this_cpu_ptr(y); 3. Retrieve the content of the current processors instance of a per cpu variable. DEFINE_PER_CPU(int, y); int x = __get_cpu_var(y) Converts to int x = __this_cpu_read(y); 4. Retrieve the content of a percpu struct DEFINE_PER_CPU(struct mystruct, y); struct mystruct x = __get_cpu_var(y); Converts to memcpy(&x, this_cpu_ptr(&y), sizeof(x)); 5. Assignment to a per cpu variable DEFINE_PER_CPU(int, y) __get_cpu_var(y) = x; Converts to __this_cpu_write(y, x); 6. Increment/Decrement etc of a per cpu variable DEFINE_PER_CPU(int, y); __get_cpu_var(y)++ Converts to __this_cpu_inc(y) Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> CC: Paul Mackerras <paulus@samba.org> Signed-off-by: Christoph Lameter <cl@linux.com> [mpe: Fix build errors caused by set/or_softirq_pending(), and rework assignment in __set_breakpoint() to use memcpy().] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2014-10-22 04:23:25 +08:00
__this_cpu_write(tce_page, tcep);
}
rpn = __pa(uaddr) >> TCE_SHIFT;
proto_tce = TCE_PCI_READ;
if (direction != DMA_TO_DEVICE)
proto_tce |= TCE_PCI_WRITE;
/* We can map max one pageful of TCEs at a time */
do {
/*
* Set up the page with TCE data, looping through and setting
* the values.
*/
limit = min_t(long, npages, 4096/TCE_ENTRY_SIZE);
for (l = 0; l < limit; l++) {
tcep[l] = cpu_to_be64(proto_tce | (rpn & TCE_RPN_MASK) << TCE_RPN_SHIFT);
rpn++;
}
rc = plpar_tce_put_indirect((u64)tbl->it_index,
(u64)tcenum << 12,
(u64)__pa(tcep),
limit);
npages -= limit;
tcenum += limit;
} while (npages > 0 && !rc);
local_irq_restore(flags);
if (unlikely(rc == H_NOT_ENOUGH_RESOURCES)) {
ret = (int)rc;
tce_freemulti_pSeriesLP(tbl, tcenum_start,
(npages_start - (npages + limit)));
return ret;
}
if (rc && printk_ratelimit()) {
printk("tce_buildmulti_pSeriesLP: plpar_tce_put failed. rc=%lld\n", rc);
printk("\tindex = 0x%llx\n", (u64)tbl->it_index);
printk("\tnpages = 0x%llx\n", (u64)npages);
printk("\ttce[0] val = 0x%llx\n", tcep[0]);
dump_stack();
}
return ret;
}
static void tce_free_pSeriesLP(struct iommu_table *tbl, long tcenum, long npages)
{
u64 rc;
while (npages--) {
rc = plpar_tce_put((u64)tbl->it_index, (u64)tcenum << 12, 0);
if (rc && printk_ratelimit()) {
printk("tce_free_pSeriesLP: plpar_tce_put failed. rc=%lld\n", rc);
printk("\tindex = 0x%llx\n", (u64)tbl->it_index);
printk("\ttcenum = 0x%llx\n", (u64)tcenum);
dump_stack();
}
tcenum++;
}
}
static void tce_freemulti_pSeriesLP(struct iommu_table *tbl, long tcenum, long npages)
{
u64 rc;
powerpc/iommu: Move tce_xxx callbacks from ppc_md to iommu_table This adds a iommu_table_ops struct and puts pointer to it into the iommu_table struct. This moves tce_build/tce_free/tce_get/tce_flush callbacks from ppc_md to the new struct where they really belong to. This adds the requirement for @it_ops to be initialized before calling iommu_init_table() to make sure that we do not leave any IOMMU table with iommu_table_ops uninitialized. This is not a parameter of iommu_init_table() though as there will be cases when iommu_init_table() will not be called on TCE tables, for example - VFIO. This does s/tce_build/set/, s/tce_free/clear/ and removes "tce_" redundant prefixes. This removes tce_xxx_rm handlers from ppc_md but does not add them to iommu_table_ops as this will be done later if we decide to support TCE hypercalls in real mode. This removes _vm callbacks as only virtual mode is supported by now so this also removes @rm parameter. For pSeries, this always uses tce_buildmulti_pSeriesLP/ tce_buildmulti_pSeriesLP. This changes multi callback to fall back to tce_build_pSeriesLP/tce_free_pSeriesLP if FW_FEATURE_MULTITCE is not present. The reason for this is we still have to support "multitce=off" boot parameter in disable_multitce() and we do not want to walk through all IOMMU tables in the system and replace "multi" callbacks with single ones. For powernv, this defines _ops per PHB type which are P5IOC2/IODA1/IODA2. This makes the callbacks for them public. Later patches will extend callbacks for IODA1/2. No change in behaviour is expected. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Gavin Shan <gwshan@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-06-05 14:35:06 +08:00
if (!firmware_has_feature(FW_FEATURE_MULTITCE))
return tce_free_pSeriesLP(tbl, tcenum, npages);
rc = plpar_tce_stuff((u64)tbl->it_index, (u64)tcenum << 12, 0, npages);
if (rc && printk_ratelimit()) {
printk("tce_freemulti_pSeriesLP: plpar_tce_stuff failed\n");
printk("\trc = %lld\n", rc);
printk("\tindex = 0x%llx\n", (u64)tbl->it_index);
printk("\tnpages = 0x%llx\n", (u64)npages);
dump_stack();
}
}
static unsigned long tce_get_pSeriesLP(struct iommu_table *tbl, long tcenum)
{
u64 rc;
unsigned long tce_ret;
rc = plpar_tce_get((u64)tbl->it_index, (u64)tcenum << 12, &tce_ret);
if (rc && printk_ratelimit()) {
printk("tce_get_pSeriesLP: plpar_tce_get failed. rc=%lld\n", rc);
printk("\tindex = 0x%llx\n", (u64)tbl->it_index);
printk("\ttcenum = 0x%llx\n", (u64)tcenum);
dump_stack();
}
return tce_ret;
}
/* this is compatible with cells for the device tree property */
struct dynamic_dma_window_prop {
__be32 liobn; /* tce table number */
__be64 dma_base; /* address hi,lo */
__be32 tce_shift; /* ilog2(tce_page_size) */
__be32 window_shift; /* ilog2(tce_window_size) */
};
struct direct_window {
struct device_node *device;
const struct dynamic_dma_window_prop *prop;
struct list_head list;
};
/* Dynamic DMA Window support */
struct ddw_query_response {
u32 windows_available;
u32 largest_available_block;
u32 page_size;
u32 migration_capable;
};
struct ddw_create_response {
u32 liobn;
u32 addr_hi;
u32 addr_lo;
};
static LIST_HEAD(direct_window_list);
/* prevents races between memory on/offline and window creation */
static DEFINE_SPINLOCK(direct_window_list_lock);
/* protects initializing window twice for same device */
static DEFINE_MUTEX(direct_window_init_mutex);
#define DIRECT64_PROPNAME "linux,direct64-ddr-window-info"
static int tce_clearrange_multi_pSeriesLP(unsigned long start_pfn,
unsigned long num_pfn, const void *arg)
{
const struct dynamic_dma_window_prop *maprange = arg;
int rc;
u64 tce_size, num_tce, dma_offset, next;
u32 tce_shift;
long limit;
tce_shift = be32_to_cpu(maprange->tce_shift);
tce_size = 1ULL << tce_shift;
next = start_pfn << PAGE_SHIFT;
num_tce = num_pfn << PAGE_SHIFT;
/* round back to the beginning of the tce page size */
num_tce += next & (tce_size - 1);
next &= ~(tce_size - 1);
/* covert to number of tces */
num_tce |= tce_size - 1;
num_tce >>= tce_shift;
do {
/*
* Set up the page with TCE data, looping through and setting
* the values.
*/
limit = min_t(long, num_tce, 512);
dma_offset = next + be64_to_cpu(maprange->dma_base);
rc = plpar_tce_stuff((u64)be32_to_cpu(maprange->liobn),
dma_offset,
0, limit);
next += limit * tce_size;
num_tce -= limit;
} while (num_tce > 0 && !rc);
return rc;
}
static int tce_setrange_multi_pSeriesLP(unsigned long start_pfn,
unsigned long num_pfn, const void *arg)
{
const struct dynamic_dma_window_prop *maprange = arg;
u64 tce_size, num_tce, dma_offset, next, proto_tce, liobn;
__be64 *tcep;
u32 tce_shift;
u64 rc = 0;
long l, limit;
local_irq_disable(); /* to protect tcep and the page behind it */
powerpc: Replace __get_cpu_var uses This still has not been merged and now powerpc is the only arch that does not have this change. Sorry about missing linuxppc-dev before. V2->V2 - Fix up to work against 3.18-rc1 __get_cpu_var() is used for multiple purposes in the kernel source. One of them is address calculation via the form &__get_cpu_var(x). This calculates the address for the instance of the percpu variable of the current processor based on an offset. Other use cases are for storing and retrieving data from the current processors percpu area. __get_cpu_var() can be used as an lvalue when writing data or on the right side of an assignment. __get_cpu_var() is defined as : __get_cpu_var() always only does an address determination. However, store and retrieve operations could use a segment prefix (or global register on other platforms) to avoid the address calculation. this_cpu_write() and this_cpu_read() can directly take an offset into a percpu area and use optimized assembly code to read and write per cpu variables. This patch converts __get_cpu_var into either an explicit address calculation using this_cpu_ptr() or into a use of this_cpu operations that use the offset. Thereby address calculations are avoided and less registers are used when code is generated. At the end of the patch set all uses of __get_cpu_var have been removed so the macro is removed too. The patch set includes passes over all arches as well. Once these operations are used throughout then specialized macros can be defined in non -x86 arches as well in order to optimize per cpu access by f.e. using a global register that may be set to the per cpu base. Transformations done to __get_cpu_var() 1. Determine the address of the percpu instance of the current processor. DEFINE_PER_CPU(int, y); int *x = &__get_cpu_var(y); Converts to int *x = this_cpu_ptr(&y); 2. Same as #1 but this time an array structure is involved. DEFINE_PER_CPU(int, y[20]); int *x = __get_cpu_var(y); Converts to int *x = this_cpu_ptr(y); 3. Retrieve the content of the current processors instance of a per cpu variable. DEFINE_PER_CPU(int, y); int x = __get_cpu_var(y) Converts to int x = __this_cpu_read(y); 4. Retrieve the content of a percpu struct DEFINE_PER_CPU(struct mystruct, y); struct mystruct x = __get_cpu_var(y); Converts to memcpy(&x, this_cpu_ptr(&y), sizeof(x)); 5. Assignment to a per cpu variable DEFINE_PER_CPU(int, y) __get_cpu_var(y) = x; Converts to __this_cpu_write(y, x); 6. Increment/Decrement etc of a per cpu variable DEFINE_PER_CPU(int, y); __get_cpu_var(y)++ Converts to __this_cpu_inc(y) Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> CC: Paul Mackerras <paulus@samba.org> Signed-off-by: Christoph Lameter <cl@linux.com> [mpe: Fix build errors caused by set/or_softirq_pending(), and rework assignment in __set_breakpoint() to use memcpy().] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2014-10-22 04:23:25 +08:00
tcep = __this_cpu_read(tce_page);
if (!tcep) {
tcep = (__be64 *)__get_free_page(GFP_ATOMIC);
if (!tcep) {
local_irq_enable();
return -ENOMEM;
}
powerpc: Replace __get_cpu_var uses This still has not been merged and now powerpc is the only arch that does not have this change. Sorry about missing linuxppc-dev before. V2->V2 - Fix up to work against 3.18-rc1 __get_cpu_var() is used for multiple purposes in the kernel source. One of them is address calculation via the form &__get_cpu_var(x). This calculates the address for the instance of the percpu variable of the current processor based on an offset. Other use cases are for storing and retrieving data from the current processors percpu area. __get_cpu_var() can be used as an lvalue when writing data or on the right side of an assignment. __get_cpu_var() is defined as : __get_cpu_var() always only does an address determination. However, store and retrieve operations could use a segment prefix (or global register on other platforms) to avoid the address calculation. this_cpu_write() and this_cpu_read() can directly take an offset into a percpu area and use optimized assembly code to read and write per cpu variables. This patch converts __get_cpu_var into either an explicit address calculation using this_cpu_ptr() or into a use of this_cpu operations that use the offset. Thereby address calculations are avoided and less registers are used when code is generated. At the end of the patch set all uses of __get_cpu_var have been removed so the macro is removed too. The patch set includes passes over all arches as well. Once these operations are used throughout then specialized macros can be defined in non -x86 arches as well in order to optimize per cpu access by f.e. using a global register that may be set to the per cpu base. Transformations done to __get_cpu_var() 1. Determine the address of the percpu instance of the current processor. DEFINE_PER_CPU(int, y); int *x = &__get_cpu_var(y); Converts to int *x = this_cpu_ptr(&y); 2. Same as #1 but this time an array structure is involved. DEFINE_PER_CPU(int, y[20]); int *x = __get_cpu_var(y); Converts to int *x = this_cpu_ptr(y); 3. Retrieve the content of the current processors instance of a per cpu variable. DEFINE_PER_CPU(int, y); int x = __get_cpu_var(y) Converts to int x = __this_cpu_read(y); 4. Retrieve the content of a percpu struct DEFINE_PER_CPU(struct mystruct, y); struct mystruct x = __get_cpu_var(y); Converts to memcpy(&x, this_cpu_ptr(&y), sizeof(x)); 5. Assignment to a per cpu variable DEFINE_PER_CPU(int, y) __get_cpu_var(y) = x; Converts to __this_cpu_write(y, x); 6. Increment/Decrement etc of a per cpu variable DEFINE_PER_CPU(int, y); __get_cpu_var(y)++ Converts to __this_cpu_inc(y) Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> CC: Paul Mackerras <paulus@samba.org> Signed-off-by: Christoph Lameter <cl@linux.com> [mpe: Fix build errors caused by set/or_softirq_pending(), and rework assignment in __set_breakpoint() to use memcpy().] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2014-10-22 04:23:25 +08:00
__this_cpu_write(tce_page, tcep);
}
proto_tce = TCE_PCI_READ | TCE_PCI_WRITE;
liobn = (u64)be32_to_cpu(maprange->liobn);
tce_shift = be32_to_cpu(maprange->tce_shift);
tce_size = 1ULL << tce_shift;
next = start_pfn << PAGE_SHIFT;
num_tce = num_pfn << PAGE_SHIFT;
/* round back to the beginning of the tce page size */
num_tce += next & (tce_size - 1);
next &= ~(tce_size - 1);
/* covert to number of tces */
num_tce |= tce_size - 1;
num_tce >>= tce_shift;
/* We can map max one pageful of TCEs at a time */
do {
/*
* Set up the page with TCE data, looping through and setting
* the values.
*/
limit = min_t(long, num_tce, 4096/TCE_ENTRY_SIZE);
dma_offset = next + be64_to_cpu(maprange->dma_base);
for (l = 0; l < limit; l++) {
tcep[l] = cpu_to_be64(proto_tce | next);
next += tce_size;
}
rc = plpar_tce_put_indirect(liobn,
dma_offset,
(u64)__pa(tcep),
limit);
num_tce -= limit;
} while (num_tce > 0 && !rc);
/* error cleanup: caller will clear whole range */
local_irq_enable();
return rc;
}
static int tce_setrange_multi_pSeriesLP_walk(unsigned long start_pfn,
unsigned long num_pfn, void *arg)
{
return tce_setrange_multi_pSeriesLP(start_pfn, num_pfn, arg);
}
#ifdef CONFIG_PCI
static void iommu_table_setparms(struct pci_controller *phb,
struct device_node *dn,
struct iommu_table *tbl)
{
struct device_node *node;
const unsigned long *basep, *sw_inval;
[POWERPC] linux,tce-size property is 32 bits The "linux,tce-size" property is only 32 bits (see prom_initialize_tce_table() in arch/powerpc/kernel/prom_init.c). Treating it as an unsigned long in iommu_table_setparms() leads to access beyond the end of the property's buffer, so we pass garbage to the memset() in that function. [boot]0020 XICS Init i8259 legacy interrupt controller initialized [boot]0021 XICS Done PID hash table entries: 4096 (order: 12, 32768 bytes) cpu 0x0: Vector: 300 (Data Access) at [c0000000fe783850] pc: c000000000035e90: .memset+0x60/0xfc lr: c000000000044fa4: .iommu_table_setparms+0xb0/0x158 sp: c0000000fe783ad0 msr: 9000000000009032 dar: c000000100000000 dsisr: 42010000 current = 0xc00000000450e810 paca = 0xc000000000411580 pid = 1, comm = swapper enter ? for help [link register ] c000000000044fa4 .iommu_table_setparms+0xb0/0x158 [c0000000fe783ad0] c000000000044f4c .iommu_table_setparms+0x58/0x158 (unreliable) [c0000000fe783b70] c00000000004529c .iommu_bus_setup_pSeries+0x1c4/0x254 [c0000000fe783c00] c00000000002b8ac .do_bus_setup+0x3c/0xe4 [c0000000fe783c80] c00000000002c924 .pcibios_fixup_bus+0x64/0xd8 [c0000000fe783d00] c0000000001a2d5c .pci_scan_child_bus+0x6c/0x10c [c0000000fe783da0] c00000000002be28 .scan_phb+0x17c/0x1b4 [c0000000fe783e40] c0000000003cfa00 .pcibios_init+0x58/0x19c [c0000000fe783ec0] c0000000000094b4 .init+0x1e8/0x3d8 [c0000000fe783f90] c000000000026e54 .kernel_thread+0x4c/0x68 Signed-off-by: Nathan Lynch <ntl@pobox.com> Acked-by: Olof Johansson <olof@lixom.net> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-10-05 11:28:00 +08:00
const u32 *sizep;
node = phb->dn;
basep = of_get_property(node, "linux,tce-base", NULL);
sizep = of_get_property(node, "linux,tce-size", NULL);
if (basep == NULL || sizep == NULL) {
printk(KERN_ERR "PCI_DMA: iommu_table_setparms: %s has "
"missing tce entries !\n", dn->full_name);
return;
}
tbl->it_base = (unsigned long)__va(*basep);
if (!is_kdump_kernel())
memset((void *)tbl->it_base, 0, *sizep);
tbl->it_busno = phb->bus->number;
tbl->it_page_shift = IOMMU_PAGE_SHIFT_4K;
/* Units of tce entries */
tbl->it_offset = phb->dma_window_base_cur >> tbl->it_page_shift;
/* Test if we are going over 2GB of DMA space */
if (phb->dma_window_base_cur + phb->dma_window_size > 0x80000000ul) {
udbg_printf("PCI_DMA: Unexpected number of IOAs under this PHB.\n");
panic("PCI_DMA: Unexpected number of IOAs under this PHB.\n");
}
phb->dma_window_base_cur += phb->dma_window_size;
/* Set the tce table size - measured in entries */
tbl->it_size = phb->dma_window_size >> tbl->it_page_shift;
tbl->it_index = 0;
tbl->it_blocksize = 16;
tbl->it_type = TCE_PCI;
sw_inval = of_get_property(node, "linux,tce-sw-invalidate-info", NULL);
if (sw_inval) {
/*
* This property contains information on how to
* invalidate the TCE entry. The first property is
* the base MMIO address used to invalidate entries.
* The second property tells us the format of the TCE
* invalidate (whether it needs to be shifted) and
* some magic routing info to add to our invalidate
* command.
*/
tbl->it_index = (unsigned long) ioremap(sw_inval[0], 8);
tbl->it_busno = sw_inval[1]; /* overload this with magic */
tbl->it_type = TCE_PCI_SWINV_CREATE | TCE_PCI_SWINV_FREE;
}
}
/*
* iommu_table_setparms_lpar
*
* Function: On pSeries LPAR systems, return TCE table info, given a pci bus.
*/
static void iommu_table_setparms_lpar(struct pci_controller *phb,
struct device_node *dn,
struct iommu_table *tbl,
const __be32 *dma_window)
{
unsigned long offset, size;
of_parse_dma_window(dn, dma_window, &tbl->it_index, &offset, &size);
tbl->it_busno = phb->bus->number;
tbl->it_page_shift = IOMMU_PAGE_SHIFT_4K;
tbl->it_base = 0;
tbl->it_blocksize = 16;
tbl->it_type = TCE_PCI;
tbl->it_offset = offset >> tbl->it_page_shift;
tbl->it_size = size >> tbl->it_page_shift;
}
powerpc/iommu: Move tce_xxx callbacks from ppc_md to iommu_table This adds a iommu_table_ops struct and puts pointer to it into the iommu_table struct. This moves tce_build/tce_free/tce_get/tce_flush callbacks from ppc_md to the new struct where they really belong to. This adds the requirement for @it_ops to be initialized before calling iommu_init_table() to make sure that we do not leave any IOMMU table with iommu_table_ops uninitialized. This is not a parameter of iommu_init_table() though as there will be cases when iommu_init_table() will not be called on TCE tables, for example - VFIO. This does s/tce_build/set/, s/tce_free/clear/ and removes "tce_" redundant prefixes. This removes tce_xxx_rm handlers from ppc_md but does not add them to iommu_table_ops as this will be done later if we decide to support TCE hypercalls in real mode. This removes _vm callbacks as only virtual mode is supported by now so this also removes @rm parameter. For pSeries, this always uses tce_buildmulti_pSeriesLP/ tce_buildmulti_pSeriesLP. This changes multi callback to fall back to tce_build_pSeriesLP/tce_free_pSeriesLP if FW_FEATURE_MULTITCE is not present. The reason for this is we still have to support "multitce=off" boot parameter in disable_multitce() and we do not want to walk through all IOMMU tables in the system and replace "multi" callbacks with single ones. For powernv, this defines _ops per PHB type which are P5IOC2/IODA1/IODA2. This makes the callbacks for them public. Later patches will extend callbacks for IODA1/2. No change in behaviour is expected. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Gavin Shan <gwshan@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-06-05 14:35:06 +08:00
struct iommu_table_ops iommu_table_pseries_ops = {
.set = tce_build_pSeries,
.clear = tce_free_pSeries,
.get = tce_get_pseries
};
static void pci_dma_bus_setup_pSeries(struct pci_bus *bus)
{
struct device_node *dn;
struct iommu_table *tbl;
struct device_node *isa_dn, *isa_dn_orig;
struct device_node *tmp;
struct pci_dn *pci;
int children;
dn = pci_bus_to_OF_node(bus);
pr_debug("pci_dma_bus_setup_pSeries: setting up bus %s\n", dn->full_name);
if (bus->self) {
/* This is not a root bus, any setup will be done for the
* device-side of the bridge in iommu_dev_setup_pSeries().
*/
return;
}
pci = PCI_DN(dn);
/* Check if the ISA bus on the system is under
* this PHB.
*/
isa_dn = isa_dn_orig = of_find_node_by_type(NULL, "isa");
while (isa_dn && isa_dn != dn)
isa_dn = isa_dn->parent;
of_node_put(isa_dn_orig);
/* Count number of direct PCI children of the PHB. */
for (children = 0, tmp = dn->child; tmp; tmp = tmp->sibling)
children++;
pr_debug("Children: %d\n", children);
/* Calculate amount of DMA window per slot. Each window must be
* a power of two (due to pci_alloc_consistent requirements).
*
* Keep 256MB aside for PHBs with ISA.
*/
if (!isa_dn) {
/* No ISA/IDE - just set window size and return */
pci->phb->dma_window_size = 0x80000000ul; /* To be divided */
while (pci->phb->dma_window_size * children > 0x80000000ul)
pci->phb->dma_window_size >>= 1;
pr_debug("No ISA/IDE, window size is 0x%llx\n",
pci->phb->dma_window_size);
pci->phb->dma_window_base_cur = 0;
return;
}
/* If we have ISA, then we probably have an IDE
* controller too. Allocate a 128MB table but
* skip the first 128MB to avoid stepping on ISA
* space.
*/
pci->phb->dma_window_size = 0x8000000ul;
pci->phb->dma_window_base_cur = 0x8000000ul;
tbl = kzalloc_node(sizeof(struct iommu_table), GFP_KERNEL,
pci->phb->node);
iommu_table_setparms(pci->phb, dn, tbl);
powerpc/iommu: Move tce_xxx callbacks from ppc_md to iommu_table This adds a iommu_table_ops struct and puts pointer to it into the iommu_table struct. This moves tce_build/tce_free/tce_get/tce_flush callbacks from ppc_md to the new struct where they really belong to. This adds the requirement for @it_ops to be initialized before calling iommu_init_table() to make sure that we do not leave any IOMMU table with iommu_table_ops uninitialized. This is not a parameter of iommu_init_table() though as there will be cases when iommu_init_table() will not be called on TCE tables, for example - VFIO. This does s/tce_build/set/, s/tce_free/clear/ and removes "tce_" redundant prefixes. This removes tce_xxx_rm handlers from ppc_md but does not add them to iommu_table_ops as this will be done later if we decide to support TCE hypercalls in real mode. This removes _vm callbacks as only virtual mode is supported by now so this also removes @rm parameter. For pSeries, this always uses tce_buildmulti_pSeriesLP/ tce_buildmulti_pSeriesLP. This changes multi callback to fall back to tce_build_pSeriesLP/tce_free_pSeriesLP if FW_FEATURE_MULTITCE is not present. The reason for this is we still have to support "multitce=off" boot parameter in disable_multitce() and we do not want to walk through all IOMMU tables in the system and replace "multi" callbacks with single ones. For powernv, this defines _ops per PHB type which are P5IOC2/IODA1/IODA2. This makes the callbacks for them public. Later patches will extend callbacks for IODA1/2. No change in behaviour is expected. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Gavin Shan <gwshan@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-06-05 14:35:06 +08:00
tbl->it_ops = &iommu_table_pseries_ops;
pci->iommu_table = iommu_init_table(tbl, pci->phb->node);
iommu_register_group(tbl, pci_domain_nr(bus), 0);
/* Divide the rest (1.75GB) among the children */
pci->phb->dma_window_size = 0x80000000ul;
while (pci->phb->dma_window_size * children > 0x70000000ul)
pci->phb->dma_window_size >>= 1;
pr_debug("ISA/IDE, window size is 0x%llx\n", pci->phb->dma_window_size);
}
powerpc/iommu: Move tce_xxx callbacks from ppc_md to iommu_table This adds a iommu_table_ops struct and puts pointer to it into the iommu_table struct. This moves tce_build/tce_free/tce_get/tce_flush callbacks from ppc_md to the new struct where they really belong to. This adds the requirement for @it_ops to be initialized before calling iommu_init_table() to make sure that we do not leave any IOMMU table with iommu_table_ops uninitialized. This is not a parameter of iommu_init_table() though as there will be cases when iommu_init_table() will not be called on TCE tables, for example - VFIO. This does s/tce_build/set/, s/tce_free/clear/ and removes "tce_" redundant prefixes. This removes tce_xxx_rm handlers from ppc_md but does not add them to iommu_table_ops as this will be done later if we decide to support TCE hypercalls in real mode. This removes _vm callbacks as only virtual mode is supported by now so this also removes @rm parameter. For pSeries, this always uses tce_buildmulti_pSeriesLP/ tce_buildmulti_pSeriesLP. This changes multi callback to fall back to tce_build_pSeriesLP/tce_free_pSeriesLP if FW_FEATURE_MULTITCE is not present. The reason for this is we still have to support "multitce=off" boot parameter in disable_multitce() and we do not want to walk through all IOMMU tables in the system and replace "multi" callbacks with single ones. For powernv, this defines _ops per PHB type which are P5IOC2/IODA1/IODA2. This makes the callbacks for them public. Later patches will extend callbacks for IODA1/2. No change in behaviour is expected. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Gavin Shan <gwshan@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-06-05 14:35:06 +08:00
struct iommu_table_ops iommu_table_lpar_multi_ops = {
.set = tce_buildmulti_pSeriesLP,
.clear = tce_freemulti_pSeriesLP,
.get = tce_get_pSeriesLP
};
static void pci_dma_bus_setup_pSeriesLP(struct pci_bus *bus)
{
struct iommu_table *tbl;
struct device_node *dn, *pdn;
struct pci_dn *ppci;
const __be32 *dma_window = NULL;
dn = pci_bus_to_OF_node(bus);
pr_debug("pci_dma_bus_setup_pSeriesLP: setting up bus %s\n",
dn->full_name);
/* Find nearest ibm,dma-window, walking up the device tree */
for (pdn = dn; pdn != NULL; pdn = pdn->parent) {
dma_window = of_get_property(pdn, "ibm,dma-window", NULL);
if (dma_window != NULL)
break;
}
if (dma_window == NULL) {
pr_debug(" no ibm,dma-window property !\n");
return;
}
ppci = PCI_DN(pdn);
pr_debug(" parent is %s, iommu_table: 0x%p\n",
pdn->full_name, ppci->iommu_table);
if (!ppci->iommu_table) {
tbl = kzalloc_node(sizeof(struct iommu_table), GFP_KERNEL,
ppci->phb->node);
iommu_table_setparms_lpar(ppci->phb, pdn, tbl, dma_window);
powerpc/iommu: Move tce_xxx callbacks from ppc_md to iommu_table This adds a iommu_table_ops struct and puts pointer to it into the iommu_table struct. This moves tce_build/tce_free/tce_get/tce_flush callbacks from ppc_md to the new struct where they really belong to. This adds the requirement for @it_ops to be initialized before calling iommu_init_table() to make sure that we do not leave any IOMMU table with iommu_table_ops uninitialized. This is not a parameter of iommu_init_table() though as there will be cases when iommu_init_table() will not be called on TCE tables, for example - VFIO. This does s/tce_build/set/, s/tce_free/clear/ and removes "tce_" redundant prefixes. This removes tce_xxx_rm handlers from ppc_md but does not add them to iommu_table_ops as this will be done later if we decide to support TCE hypercalls in real mode. This removes _vm callbacks as only virtual mode is supported by now so this also removes @rm parameter. For pSeries, this always uses tce_buildmulti_pSeriesLP/ tce_buildmulti_pSeriesLP. This changes multi callback to fall back to tce_build_pSeriesLP/tce_free_pSeriesLP if FW_FEATURE_MULTITCE is not present. The reason for this is we still have to support "multitce=off" boot parameter in disable_multitce() and we do not want to walk through all IOMMU tables in the system and replace "multi" callbacks with single ones. For powernv, this defines _ops per PHB type which are P5IOC2/IODA1/IODA2. This makes the callbacks for them public. Later patches will extend callbacks for IODA1/2. No change in behaviour is expected. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Gavin Shan <gwshan@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-06-05 14:35:06 +08:00
tbl->it_ops = &iommu_table_lpar_multi_ops;
ppci->iommu_table = iommu_init_table(tbl, ppci->phb->node);
iommu_register_group(tbl, pci_domain_nr(bus), 0);
pr_debug(" created table: %p\n", ppci->iommu_table);
}
}
static void pci_dma_dev_setup_pSeries(struct pci_dev *dev)
{
struct device_node *dn;
struct iommu_table *tbl;
pr_debug("pci_dma_dev_setup_pSeries: %s\n", pci_name(dev));
dn = dev->dev.of_node;
/* If we're the direct child of a root bus, then we need to allocate
* an iommu table ourselves. The bus setup code should have setup
* the window sizes already.
*/
if (!dev->bus->self) {
struct pci_controller *phb = PCI_DN(dn)->phb;
pr_debug(" --> first child, no bridge. Allocating iommu table.\n");
tbl = kzalloc_node(sizeof(struct iommu_table), GFP_KERNEL,
phb->node);
iommu_table_setparms(phb, dn, tbl);
powerpc/iommu: Move tce_xxx callbacks from ppc_md to iommu_table This adds a iommu_table_ops struct and puts pointer to it into the iommu_table struct. This moves tce_build/tce_free/tce_get/tce_flush callbacks from ppc_md to the new struct where they really belong to. This adds the requirement for @it_ops to be initialized before calling iommu_init_table() to make sure that we do not leave any IOMMU table with iommu_table_ops uninitialized. This is not a parameter of iommu_init_table() though as there will be cases when iommu_init_table() will not be called on TCE tables, for example - VFIO. This does s/tce_build/set/, s/tce_free/clear/ and removes "tce_" redundant prefixes. This removes tce_xxx_rm handlers from ppc_md but does not add them to iommu_table_ops as this will be done later if we decide to support TCE hypercalls in real mode. This removes _vm callbacks as only virtual mode is supported by now so this also removes @rm parameter. For pSeries, this always uses tce_buildmulti_pSeriesLP/ tce_buildmulti_pSeriesLP. This changes multi callback to fall back to tce_build_pSeriesLP/tce_free_pSeriesLP if FW_FEATURE_MULTITCE is not present. The reason for this is we still have to support "multitce=off" boot parameter in disable_multitce() and we do not want to walk through all IOMMU tables in the system and replace "multi" callbacks with single ones. For powernv, this defines _ops per PHB type which are P5IOC2/IODA1/IODA2. This makes the callbacks for them public. Later patches will extend callbacks for IODA1/2. No change in behaviour is expected. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Gavin Shan <gwshan@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-06-05 14:35:06 +08:00
tbl->it_ops = &iommu_table_pseries_ops;
PCI_DN(dn)->iommu_table = iommu_init_table(tbl, phb->node);
iommu_register_group(tbl, pci_domain_nr(phb->bus), 0);
set_iommu_table_base(&dev->dev, tbl);
iommu_add_device(&dev->dev);
return;
}
/* If this device is further down the bus tree, search upwards until
* an already allocated iommu table is found and use that.
*/
while (dn && PCI_DN(dn) && PCI_DN(dn)->iommu_table == NULL)
dn = dn->parent;
if (dn && PCI_DN(dn)) {
set_iommu_table_base(&dev->dev, PCI_DN(dn)->iommu_table);
iommu_add_device(&dev->dev);
} else
printk(KERN_WARNING "iommu: Device %s has no iommu table\n",
pci_name(dev));
}
static int __read_mostly disable_ddw;
static int __init disable_ddw_setup(char *str)
{
disable_ddw = 1;
printk(KERN_INFO "ppc iommu: disabling ddw.\n");
return 0;
}
early_param("disable_ddw", disable_ddw_setup);
powerpc/pseries: Avoid deadlock on removing ddw Function remove_ddw() could be called in of_reconfig_notifier and we potentially remove the dynamic DMA window property, which invokes of_reconfig_notifier again. Eventually, it leads to the deadlock as following backtrace shows. The patch fixes the above issue by deferring releasing the dynamic DMA window property while releasing the device node. ============================================= [ INFO: possible recursive locking detected ] 3.16.0+ #428 Tainted: G W --------------------------------------------- drmgr/2273 is trying to acquire lock: ((of_reconfig_chain).rwsem){.+.+..}, at: [<c000000000091890>] \ .__blocking_notifier_call_chain+0x40/0x78 but task is already holding lock: ((of_reconfig_chain).rwsem){.+.+..}, at: [<c000000000091890>] \ .__blocking_notifier_call_chain+0x40/0x78 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock((of_reconfig_chain).rwsem); lock((of_reconfig_chain).rwsem); *** DEADLOCK *** May be due to missing lock nesting notation 2 locks held by drmgr/2273: #0: (sb_writers#4){.+.+.+}, at: [<c0000000001cbe70>] \ .vfs_write+0xb0/0x1f8 #1: ((of_reconfig_chain).rwsem){.+.+..}, at: [<c000000000091890>] \ .__blocking_notifier_call_chain+0x40/0x78 stack backtrace: CPU: 17 PID: 2273 Comm: drmgr Tainted: G W 3.16.0+ #428 Call Trace: [c0000000137e7000] [c000000000013d9c] .show_stack+0x88/0x148 (unreliable) [c0000000137e70b0] [c00000000083cd34] .dump_stack+0x7c/0x9c [c0000000137e7130] [c0000000000b8afc] .__lock_acquire+0x128c/0x1c68 [c0000000137e7280] [c0000000000b9a4c] .lock_acquire+0xe8/0x104 [c0000000137e7350] [c00000000083588c] .down_read+0x4c/0x90 [c0000000137e73e0] [c000000000091890] .__blocking_notifier_call_chain+0x40/0x78 [c0000000137e7490] [c000000000091900] .blocking_notifier_call_chain+0x38/0x48 [c0000000137e7520] [c000000000682a28] .of_reconfig_notify+0x34/0x5c [c0000000137e75b0] [c000000000682a9c] .of_property_notify+0x4c/0x54 [c0000000137e7650] [c000000000682bf0] .of_remove_property+0x30/0xd4 [c0000000137e76f0] [c000000000052a44] .remove_ddw+0x144/0x168 [c0000000137e7790] [c000000000053204] .iommu_reconfig_notifier+0x30/0xe0 [c0000000137e7820] [c00000000009137c] .notifier_call_chain+0x6c/0xb4 [c0000000137e78c0] [c0000000000918ac] .__blocking_notifier_call_chain+0x5c/0x78 [c0000000137e7970] [c000000000091900] .blocking_notifier_call_chain+0x38/0x48 [c0000000137e7a00] [c000000000682a28] .of_reconfig_notify+0x34/0x5c [c0000000137e7a90] [c000000000682e14] .of_detach_node+0x44/0x1fc [c0000000137e7b40] [c0000000000518e4] .ofdt_write+0x3ac/0x688 [c0000000137e7c20] [c000000000238430] .proc_reg_write+0xb8/0xd4 [c0000000137e7cd0] [c0000000001cbeac] .vfs_write+0xec/0x1f8 [c0000000137e7d70] [c0000000001cc3b0] .SyS_write+0x58/0xa0 [c0000000137e7e30] [c00000000000a064] syscall_exit+0x0/0x98 Cc: stable@vger.kernel.org Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-08-11 17:16:20 +08:00
static void remove_ddw(struct device_node *np, bool remove_prop)
{
struct dynamic_dma_window_prop *dwp;
struct property *win64;
u32 ddw_avail[3];
u64 liobn;
int ret = 0;
ret = of_property_read_u32_array(np, "ibm,ddw-applicable",
&ddw_avail[0], 3);
win64 = of_find_property(np, DIRECT64_PROPNAME, NULL);
if (!win64)
return;
if (ret || win64->length < sizeof(*dwp))
goto delprop;
dwp = win64->value;
liobn = (u64)be32_to_cpu(dwp->liobn);
/* clear the whole window, note the arg is in kernel pages */
ret = tce_clearrange_multi_pSeriesLP(0,
1ULL << (be32_to_cpu(dwp->window_shift) - PAGE_SHIFT), dwp);
if (ret)
pr_warning("%s failed to clear tces in window.\n",
np->full_name);
else
pr_debug("%s successfully cleared tces in window.\n",
np->full_name);
ret = rtas_call(ddw_avail[2], 1, 1, NULL, liobn);
if (ret)
pr_warning("%s: failed to remove direct window: rtas returned "
"%d to ibm,remove-pe-dma-window(%x) %llx\n",
np->full_name, ret, ddw_avail[2], liobn);
else
pr_debug("%s: successfully removed direct window: rtas returned "
"%d to ibm,remove-pe-dma-window(%x) %llx\n",
np->full_name, ret, ddw_avail[2], liobn);
delprop:
powerpc/pseries: Avoid deadlock on removing ddw Function remove_ddw() could be called in of_reconfig_notifier and we potentially remove the dynamic DMA window property, which invokes of_reconfig_notifier again. Eventually, it leads to the deadlock as following backtrace shows. The patch fixes the above issue by deferring releasing the dynamic DMA window property while releasing the device node. ============================================= [ INFO: possible recursive locking detected ] 3.16.0+ #428 Tainted: G W --------------------------------------------- drmgr/2273 is trying to acquire lock: ((of_reconfig_chain).rwsem){.+.+..}, at: [<c000000000091890>] \ .__blocking_notifier_call_chain+0x40/0x78 but task is already holding lock: ((of_reconfig_chain).rwsem){.+.+..}, at: [<c000000000091890>] \ .__blocking_notifier_call_chain+0x40/0x78 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock((of_reconfig_chain).rwsem); lock((of_reconfig_chain).rwsem); *** DEADLOCK *** May be due to missing lock nesting notation 2 locks held by drmgr/2273: #0: (sb_writers#4){.+.+.+}, at: [<c0000000001cbe70>] \ .vfs_write+0xb0/0x1f8 #1: ((of_reconfig_chain).rwsem){.+.+..}, at: [<c000000000091890>] \ .__blocking_notifier_call_chain+0x40/0x78 stack backtrace: CPU: 17 PID: 2273 Comm: drmgr Tainted: G W 3.16.0+ #428 Call Trace: [c0000000137e7000] [c000000000013d9c] .show_stack+0x88/0x148 (unreliable) [c0000000137e70b0] [c00000000083cd34] .dump_stack+0x7c/0x9c [c0000000137e7130] [c0000000000b8afc] .__lock_acquire+0x128c/0x1c68 [c0000000137e7280] [c0000000000b9a4c] .lock_acquire+0xe8/0x104 [c0000000137e7350] [c00000000083588c] .down_read+0x4c/0x90 [c0000000137e73e0] [c000000000091890] .__blocking_notifier_call_chain+0x40/0x78 [c0000000137e7490] [c000000000091900] .blocking_notifier_call_chain+0x38/0x48 [c0000000137e7520] [c000000000682a28] .of_reconfig_notify+0x34/0x5c [c0000000137e75b0] [c000000000682a9c] .of_property_notify+0x4c/0x54 [c0000000137e7650] [c000000000682bf0] .of_remove_property+0x30/0xd4 [c0000000137e76f0] [c000000000052a44] .remove_ddw+0x144/0x168 [c0000000137e7790] [c000000000053204] .iommu_reconfig_notifier+0x30/0xe0 [c0000000137e7820] [c00000000009137c] .notifier_call_chain+0x6c/0xb4 [c0000000137e78c0] [c0000000000918ac] .__blocking_notifier_call_chain+0x5c/0x78 [c0000000137e7970] [c000000000091900] .blocking_notifier_call_chain+0x38/0x48 [c0000000137e7a00] [c000000000682a28] .of_reconfig_notify+0x34/0x5c [c0000000137e7a90] [c000000000682e14] .of_detach_node+0x44/0x1fc [c0000000137e7b40] [c0000000000518e4] .ofdt_write+0x3ac/0x688 [c0000000137e7c20] [c000000000238430] .proc_reg_write+0xb8/0xd4 [c0000000137e7cd0] [c0000000001cbeac] .vfs_write+0xec/0x1f8 [c0000000137e7d70] [c0000000001cc3b0] .SyS_write+0x58/0xa0 [c0000000137e7e30] [c00000000000a064] syscall_exit+0x0/0x98 Cc: stable@vger.kernel.org Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-08-11 17:16:20 +08:00
if (remove_prop)
ret = of_remove_property(np, win64);
if (ret)
pr_warning("%s: failed to remove direct window property: %d\n",
np->full_name, ret);
}
static u64 find_existing_ddw(struct device_node *pdn)
{
struct direct_window *window;
const struct dynamic_dma_window_prop *direct64;
u64 dma_addr = 0;
spin_lock(&direct_window_list_lock);
/* check if we already created a window and dupe that config if so */
list_for_each_entry(window, &direct_window_list, list) {
if (window->device == pdn) {
direct64 = window->prop;
dma_addr = be64_to_cpu(direct64->dma_base);
break;
}
}
spin_unlock(&direct_window_list_lock);
return dma_addr;
}
static int find_existing_ddw_windows(void)
{
int len;
struct device_node *pdn;
struct direct_window *window;
const struct dynamic_dma_window_prop *direct64;
if (!firmware_has_feature(FW_FEATURE_LPAR))
return 0;
for_each_node_with_property(pdn, DIRECT64_PROPNAME) {
direct64 = of_get_property(pdn, DIRECT64_PROPNAME, &len);
if (!direct64)
continue;
window = kzalloc(sizeof(*window), GFP_KERNEL);
if (!window || len < sizeof(struct dynamic_dma_window_prop)) {
kfree(window);
powerpc/pseries: Avoid deadlock on removing ddw Function remove_ddw() could be called in of_reconfig_notifier and we potentially remove the dynamic DMA window property, which invokes of_reconfig_notifier again. Eventually, it leads to the deadlock as following backtrace shows. The patch fixes the above issue by deferring releasing the dynamic DMA window property while releasing the device node. ============================================= [ INFO: possible recursive locking detected ] 3.16.0+ #428 Tainted: G W --------------------------------------------- drmgr/2273 is trying to acquire lock: ((of_reconfig_chain).rwsem){.+.+..}, at: [<c000000000091890>] \ .__blocking_notifier_call_chain+0x40/0x78 but task is already holding lock: ((of_reconfig_chain).rwsem){.+.+..}, at: [<c000000000091890>] \ .__blocking_notifier_call_chain+0x40/0x78 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock((of_reconfig_chain).rwsem); lock((of_reconfig_chain).rwsem); *** DEADLOCK *** May be due to missing lock nesting notation 2 locks held by drmgr/2273: #0: (sb_writers#4){.+.+.+}, at: [<c0000000001cbe70>] \ .vfs_write+0xb0/0x1f8 #1: ((of_reconfig_chain).rwsem){.+.+..}, at: [<c000000000091890>] \ .__blocking_notifier_call_chain+0x40/0x78 stack backtrace: CPU: 17 PID: 2273 Comm: drmgr Tainted: G W 3.16.0+ #428 Call Trace: [c0000000137e7000] [c000000000013d9c] .show_stack+0x88/0x148 (unreliable) [c0000000137e70b0] [c00000000083cd34] .dump_stack+0x7c/0x9c [c0000000137e7130] [c0000000000b8afc] .__lock_acquire+0x128c/0x1c68 [c0000000137e7280] [c0000000000b9a4c] .lock_acquire+0xe8/0x104 [c0000000137e7350] [c00000000083588c] .down_read+0x4c/0x90 [c0000000137e73e0] [c000000000091890] .__blocking_notifier_call_chain+0x40/0x78 [c0000000137e7490] [c000000000091900] .blocking_notifier_call_chain+0x38/0x48 [c0000000137e7520] [c000000000682a28] .of_reconfig_notify+0x34/0x5c [c0000000137e75b0] [c000000000682a9c] .of_property_notify+0x4c/0x54 [c0000000137e7650] [c000000000682bf0] .of_remove_property+0x30/0xd4 [c0000000137e76f0] [c000000000052a44] .remove_ddw+0x144/0x168 [c0000000137e7790] [c000000000053204] .iommu_reconfig_notifier+0x30/0xe0 [c0000000137e7820] [c00000000009137c] .notifier_call_chain+0x6c/0xb4 [c0000000137e78c0] [c0000000000918ac] .__blocking_notifier_call_chain+0x5c/0x78 [c0000000137e7970] [c000000000091900] .blocking_notifier_call_chain+0x38/0x48 [c0000000137e7a00] [c000000000682a28] .of_reconfig_notify+0x34/0x5c [c0000000137e7a90] [c000000000682e14] .of_detach_node+0x44/0x1fc [c0000000137e7b40] [c0000000000518e4] .ofdt_write+0x3ac/0x688 [c0000000137e7c20] [c000000000238430] .proc_reg_write+0xb8/0xd4 [c0000000137e7cd0] [c0000000001cbeac] .vfs_write+0xec/0x1f8 [c0000000137e7d70] [c0000000001cc3b0] .SyS_write+0x58/0xa0 [c0000000137e7e30] [c00000000000a064] syscall_exit+0x0/0x98 Cc: stable@vger.kernel.org Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-08-11 17:16:20 +08:00
remove_ddw(pdn, true);
continue;
}
window->device = pdn;
window->prop = direct64;
spin_lock(&direct_window_list_lock);
list_add(&window->list, &direct_window_list);
spin_unlock(&direct_window_list_lock);
}
return 0;
}
machine_arch_initcall(pseries, find_existing_ddw_windows);
static int query_ddw(struct pci_dev *dev, const u32 *ddw_avail,
struct ddw_query_response *query)
{
struct eeh_dev *edev;
u32 cfg_addr;
u64 buid;
int ret;
/*
* Get the config address and phb buid of the PE window.
* Rely on eeh to retrieve this for us.
* Retrieve them from the pci device, not the node with the
* dma-window property
*/
edev = pci_dev_to_eeh_dev(dev);
cfg_addr = edev->config_addr;
if (edev->pe_config_addr)
cfg_addr = edev->pe_config_addr;
buid = edev->phb->buid;
ret = rtas_call(ddw_avail[0], 3, 5, (u32 *)query,
cfg_addr, BUID_HI(buid), BUID_LO(buid));
dev_info(&dev->dev, "ibm,query-pe-dma-windows(%x) %x %x %x"
" returned %d\n", ddw_avail[0], cfg_addr, BUID_HI(buid),
BUID_LO(buid), ret);
return ret;
}
static int create_ddw(struct pci_dev *dev, const u32 *ddw_avail,
struct ddw_create_response *create, int page_shift,
int window_shift)
{
struct eeh_dev *edev;
u32 cfg_addr;
u64 buid;
int ret;
/*
* Get the config address and phb buid of the PE window.
* Rely on eeh to retrieve this for us.
* Retrieve them from the pci device, not the node with the
* dma-window property
*/
edev = pci_dev_to_eeh_dev(dev);
cfg_addr = edev->config_addr;
if (edev->pe_config_addr)
cfg_addr = edev->pe_config_addr;
buid = edev->phb->buid;
do {
/* extra outputs are LIOBN and dma-addr (hi, lo) */
ret = rtas_call(ddw_avail[1], 5, 4, (u32 *)create,
cfg_addr, BUID_HI(buid), BUID_LO(buid),
page_shift, window_shift);
} while (rtas_busy_delay(ret));
dev_info(&dev->dev,
"ibm,create-pe-dma-window(%x) %x %x %x %x %x returned %d "
"(liobn = 0x%x starting addr = %x %x)\n", ddw_avail[1],
cfg_addr, BUID_HI(buid), BUID_LO(buid), page_shift,
window_shift, ret, create->liobn, create->addr_hi, create->addr_lo);
return ret;
}
struct failed_ddw_pdn {
struct device_node *pdn;
struct list_head list;
};
static LIST_HEAD(failed_ddw_pdn_list);
/*
* If the PE supports dynamic dma windows, and there is space for a table
* that can map all pages in a linear offset, then setup such a table,
* and record the dma-offset in the struct device.
*
* dev: the pci device we are checking
* pdn: the parent pe node with the ibm,dma_window property
* Future: also check if we can remap the base window for our base page size
*
* returns the dma offset for use by dma_set_mask
*/
static u64 enable_ddw(struct pci_dev *dev, struct device_node *pdn)
{
int len, ret;
struct ddw_query_response query;
struct ddw_create_response create;
int page_shift;
u64 dma_addr, max_addr;
struct device_node *dn;
u32 ddw_avail[3];
struct direct_window *window;
struct property *win64;
struct dynamic_dma_window_prop *ddwprop;
struct failed_ddw_pdn *fpdn;
mutex_lock(&direct_window_init_mutex);
dma_addr = find_existing_ddw(pdn);
if (dma_addr != 0)
goto out_unlock;
/*
* If we already went through this for a previous function of
* the same device and failed, we don't want to muck with the
* DMA window again, as it will race with in-flight operations
* and can lead to EEHs. The above mutex protects access to the
* list.
*/
list_for_each_entry(fpdn, &failed_ddw_pdn_list, list) {
if (!strcmp(fpdn->pdn->full_name, pdn->full_name))
goto out_unlock;
}
/*
* the ibm,ddw-applicable property holds the tokens for:
* ibm,query-pe-dma-window
* ibm,create-pe-dma-window
* ibm,remove-pe-dma-window
* for the given node in that order.
* the property is actually in the parent, not the PE
*/
ret = of_property_read_u32_array(pdn, "ibm,ddw-applicable",
&ddw_avail[0], 3);
if (ret)
goto out_failed;
/*
* Query if there is a second window of size to map the
* whole partition. Query returns number of windows, largest
* block assigned to PE (partition endpoint), and two bitmasks
* of page sizes: supported and supported for migrate-dma.
*/
dn = pci_device_to_OF_node(dev);
ret = query_ddw(dev, ddw_avail, &query);
if (ret != 0)
goto out_failed;
if (query.windows_available == 0) {
/*
* no additional windows are available for this device.
* We might be able to reallocate the existing window,
* trading in for a larger page size.
*/
dev_dbg(&dev->dev, "no free dynamic windows");
goto out_failed;
}
if (query.page_size & 4) {
page_shift = 24; /* 16MB */
} else if (query.page_size & 2) {
page_shift = 16; /* 64kB */
} else if (query.page_size & 1) {
page_shift = 12; /* 4kB */
} else {
dev_dbg(&dev->dev, "no supported direct page size in mask %x",
query.page_size);
goto out_failed;
}
/* verify the window * number of ptes will map the partition */
/* check largest block * page size > max memory hotplug addr */
max_addr = memory_hotplug_max();
if (query.largest_available_block < (max_addr >> page_shift)) {
dev_dbg(&dev->dev, "can't map partiton max 0x%llx with %u "
"%llu-sized pages\n", max_addr, query.largest_available_block,
1ULL << page_shift);
goto out_failed;
}
len = order_base_2(max_addr);
win64 = kzalloc(sizeof(struct property), GFP_KERNEL);
if (!win64) {
dev_info(&dev->dev,
"couldn't allocate property for 64bit dma window\n");
goto out_failed;
}
win64->name = kstrdup(DIRECT64_PROPNAME, GFP_KERNEL);
win64->value = ddwprop = kmalloc(sizeof(*ddwprop), GFP_KERNEL);
win64->length = sizeof(*ddwprop);
if (!win64->name || !win64->value) {
dev_info(&dev->dev,
"couldn't allocate property name and value\n");
goto out_free_prop;
}
ret = create_ddw(dev, ddw_avail, &create, page_shift, len);
if (ret != 0)
goto out_free_prop;
ddwprop->liobn = cpu_to_be32(create.liobn);
ddwprop->dma_base = cpu_to_be64(((u64)create.addr_hi << 32) |
create.addr_lo);
ddwprop->tce_shift = cpu_to_be32(page_shift);
ddwprop->window_shift = cpu_to_be32(len);
dev_dbg(&dev->dev, "created tce table LIOBN 0x%x for %s\n",
create.liobn, dn->full_name);
window = kzalloc(sizeof(*window), GFP_KERNEL);
if (!window)
goto out_clear_window;
ret = walk_system_ram_range(0, memblock_end_of_DRAM() >> PAGE_SHIFT,
win64->value, tce_setrange_multi_pSeriesLP_walk);
if (ret) {
dev_info(&dev->dev, "failed to map direct window for %s: %d\n",
dn->full_name, ret);
goto out_free_window;
}
ret = of_add_property(pdn, win64);
if (ret) {
dev_err(&dev->dev, "unable to add dma window property for %s: %d",
pdn->full_name, ret);
goto out_free_window;
}
window->device = pdn;
window->prop = ddwprop;
spin_lock(&direct_window_list_lock);
list_add(&window->list, &direct_window_list);
spin_unlock(&direct_window_list_lock);
dma_addr = be64_to_cpu(ddwprop->dma_base);
goto out_unlock;
out_free_window:
kfree(window);
out_clear_window:
powerpc/pseries: Avoid deadlock on removing ddw Function remove_ddw() could be called in of_reconfig_notifier and we potentially remove the dynamic DMA window property, which invokes of_reconfig_notifier again. Eventually, it leads to the deadlock as following backtrace shows. The patch fixes the above issue by deferring releasing the dynamic DMA window property while releasing the device node. ============================================= [ INFO: possible recursive locking detected ] 3.16.0+ #428 Tainted: G W --------------------------------------------- drmgr/2273 is trying to acquire lock: ((of_reconfig_chain).rwsem){.+.+..}, at: [<c000000000091890>] \ .__blocking_notifier_call_chain+0x40/0x78 but task is already holding lock: ((of_reconfig_chain).rwsem){.+.+..}, at: [<c000000000091890>] \ .__blocking_notifier_call_chain+0x40/0x78 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock((of_reconfig_chain).rwsem); lock((of_reconfig_chain).rwsem); *** DEADLOCK *** May be due to missing lock nesting notation 2 locks held by drmgr/2273: #0: (sb_writers#4){.+.+.+}, at: [<c0000000001cbe70>] \ .vfs_write+0xb0/0x1f8 #1: ((of_reconfig_chain).rwsem){.+.+..}, at: [<c000000000091890>] \ .__blocking_notifier_call_chain+0x40/0x78 stack backtrace: CPU: 17 PID: 2273 Comm: drmgr Tainted: G W 3.16.0+ #428 Call Trace: [c0000000137e7000] [c000000000013d9c] .show_stack+0x88/0x148 (unreliable) [c0000000137e70b0] [c00000000083cd34] .dump_stack+0x7c/0x9c [c0000000137e7130] [c0000000000b8afc] .__lock_acquire+0x128c/0x1c68 [c0000000137e7280] [c0000000000b9a4c] .lock_acquire+0xe8/0x104 [c0000000137e7350] [c00000000083588c] .down_read+0x4c/0x90 [c0000000137e73e0] [c000000000091890] .__blocking_notifier_call_chain+0x40/0x78 [c0000000137e7490] [c000000000091900] .blocking_notifier_call_chain+0x38/0x48 [c0000000137e7520] [c000000000682a28] .of_reconfig_notify+0x34/0x5c [c0000000137e75b0] [c000000000682a9c] .of_property_notify+0x4c/0x54 [c0000000137e7650] [c000000000682bf0] .of_remove_property+0x30/0xd4 [c0000000137e76f0] [c000000000052a44] .remove_ddw+0x144/0x168 [c0000000137e7790] [c000000000053204] .iommu_reconfig_notifier+0x30/0xe0 [c0000000137e7820] [c00000000009137c] .notifier_call_chain+0x6c/0xb4 [c0000000137e78c0] [c0000000000918ac] .__blocking_notifier_call_chain+0x5c/0x78 [c0000000137e7970] [c000000000091900] .blocking_notifier_call_chain+0x38/0x48 [c0000000137e7a00] [c000000000682a28] .of_reconfig_notify+0x34/0x5c [c0000000137e7a90] [c000000000682e14] .of_detach_node+0x44/0x1fc [c0000000137e7b40] [c0000000000518e4] .ofdt_write+0x3ac/0x688 [c0000000137e7c20] [c000000000238430] .proc_reg_write+0xb8/0xd4 [c0000000137e7cd0] [c0000000001cbeac] .vfs_write+0xec/0x1f8 [c0000000137e7d70] [c0000000001cc3b0] .SyS_write+0x58/0xa0 [c0000000137e7e30] [c00000000000a064] syscall_exit+0x0/0x98 Cc: stable@vger.kernel.org Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-08-11 17:16:20 +08:00
remove_ddw(pdn, true);
out_free_prop:
kfree(win64->name);
kfree(win64->value);
kfree(win64);
out_failed:
fpdn = kzalloc(sizeof(*fpdn), GFP_KERNEL);
if (!fpdn)
goto out_unlock;
fpdn->pdn = pdn;
list_add(&fpdn->list, &failed_ddw_pdn_list);
out_unlock:
mutex_unlock(&direct_window_init_mutex);
return dma_addr;
}
static void pci_dma_dev_setup_pSeriesLP(struct pci_dev *dev)
{
struct device_node *pdn, *dn;
struct iommu_table *tbl;
const __be32 *dma_window = NULL;
struct pci_dn *pci;
pr_debug("pci_dma_dev_setup_pSeriesLP: %s\n", pci_name(dev));
/* dev setup for LPAR is a little tricky, since the device tree might
* contain the dma-window properties per-device and not necessarily
* for the bus. So we need to search upwards in the tree until we
* either hit a dma-window property, OR find a parent with a table
* already allocated.
*/
dn = pci_device_to_OF_node(dev);
pr_debug(" node is %s\n", dn->full_name);
for (pdn = dn; pdn && PCI_DN(pdn) && !PCI_DN(pdn)->iommu_table;
pdn = pdn->parent) {
dma_window = of_get_property(pdn, "ibm,dma-window", NULL);
if (dma_window)
break;
}
if (!pdn || !PCI_DN(pdn)) {
printk(KERN_WARNING "pci_dma_dev_setup_pSeriesLP: "
"no DMA window found for pci dev=%s dn=%s\n",
pci_name(dev), of_node_full_name(dn));
return;
}
pr_debug(" parent is %s\n", pdn->full_name);
pci = PCI_DN(pdn);
if (!pci->iommu_table) {
tbl = kzalloc_node(sizeof(struct iommu_table), GFP_KERNEL,
pci->phb->node);
iommu_table_setparms_lpar(pci->phb, pdn, tbl, dma_window);
powerpc/iommu: Move tce_xxx callbacks from ppc_md to iommu_table This adds a iommu_table_ops struct and puts pointer to it into the iommu_table struct. This moves tce_build/tce_free/tce_get/tce_flush callbacks from ppc_md to the new struct where they really belong to. This adds the requirement for @it_ops to be initialized before calling iommu_init_table() to make sure that we do not leave any IOMMU table with iommu_table_ops uninitialized. This is not a parameter of iommu_init_table() though as there will be cases when iommu_init_table() will not be called on TCE tables, for example - VFIO. This does s/tce_build/set/, s/tce_free/clear/ and removes "tce_" redundant prefixes. This removes tce_xxx_rm handlers from ppc_md but does not add them to iommu_table_ops as this will be done later if we decide to support TCE hypercalls in real mode. This removes _vm callbacks as only virtual mode is supported by now so this also removes @rm parameter. For pSeries, this always uses tce_buildmulti_pSeriesLP/ tce_buildmulti_pSeriesLP. This changes multi callback to fall back to tce_build_pSeriesLP/tce_free_pSeriesLP if FW_FEATURE_MULTITCE is not present. The reason for this is we still have to support "multitce=off" boot parameter in disable_multitce() and we do not want to walk through all IOMMU tables in the system and replace "multi" callbacks with single ones. For powernv, this defines _ops per PHB type which are P5IOC2/IODA1/IODA2. This makes the callbacks for them public. Later patches will extend callbacks for IODA1/2. No change in behaviour is expected. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Gavin Shan <gwshan@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-06-05 14:35:06 +08:00
tbl->it_ops = &iommu_table_lpar_multi_ops;
pci->iommu_table = iommu_init_table(tbl, pci->phb->node);
iommu_register_group(tbl, pci_domain_nr(pci->phb->bus), 0);
pr_debug(" created table: %p\n", pci->iommu_table);
} else {
pr_debug(" found DMA window, table: %p\n", pci->iommu_table);
}
set_iommu_table_base(&dev->dev, pci->iommu_table);
iommu_add_device(&dev->dev);
}
static int dma_set_mask_pSeriesLP(struct device *dev, u64 dma_mask)
{
bool ddw_enabled = false;
struct device_node *pdn, *dn;
struct pci_dev *pdev;
const __be32 *dma_window = NULL;
u64 dma_offset;
if (!dev->dma_mask)
return -EIO;
if (!dev_is_pci(dev))
goto check_mask;
pdev = to_pci_dev(dev);
/* only attempt to use a new window if 64-bit DMA is requested */
if (!disable_ddw && dma_mask == DMA_BIT_MASK(64)) {
dn = pci_device_to_OF_node(pdev);
dev_dbg(dev, "node is %s\n", dn->full_name);
/*
* the device tree might contain the dma-window properties
* per-device and not necessarily for the bus. So we need to
* search upwards in the tree until we either hit a dma-window
* property, OR find a parent with a table already allocated.
*/
for (pdn = dn; pdn && PCI_DN(pdn) && !PCI_DN(pdn)->iommu_table;
pdn = pdn->parent) {
dma_window = of_get_property(pdn, "ibm,dma-window", NULL);
if (dma_window)
break;
}
if (pdn && PCI_DN(pdn)) {
dma_offset = enable_ddw(pdev, pdn);
if (dma_offset != 0) {
dev_info(dev, "Using 64-bit direct DMA at offset %llx\n", dma_offset);
set_dma_offset(dev, dma_offset);
set_dma_ops(dev, &dma_direct_ops);
ddw_enabled = true;
}
}
}
/* fall back on iommu ops, restore table pointer with ops */
if (!ddw_enabled && get_dma_ops(dev) != &dma_iommu_ops) {
dev_info(dev, "Restoring 32-bit DMA via iommu\n");
set_dma_ops(dev, &dma_iommu_ops);
pci_dma_dev_setup_pSeriesLP(pdev);
}
check_mask:
if (!dma_supported(dev, dma_mask))
return -EIO;
*dev->dma_mask = dma_mask;
return 0;
}
static u64 dma_get_required_mask_pSeriesLP(struct device *dev)
{
if (!dev->dma_mask)
return 0;
if (!disable_ddw && dev_is_pci(dev)) {
struct pci_dev *pdev = to_pci_dev(dev);
struct device_node *dn;
dn = pci_device_to_OF_node(pdev);
/* search upwards for ibm,dma-window */
for (; dn && PCI_DN(dn) && !PCI_DN(dn)->iommu_table;
dn = dn->parent)
if (of_get_property(dn, "ibm,dma-window", NULL))
break;
/* if there is a ibm,ddw-applicable property require 64 bits */
if (dn && PCI_DN(dn) &&
of_get_property(dn, "ibm,ddw-applicable", NULL))
return DMA_BIT_MASK(64);
}
return dma_iommu_ops.get_required_mask(dev);
}
#else /* CONFIG_PCI */
#define pci_dma_bus_setup_pSeries NULL
#define pci_dma_dev_setup_pSeries NULL
#define pci_dma_bus_setup_pSeriesLP NULL
#define pci_dma_dev_setup_pSeriesLP NULL
#define dma_set_mask_pSeriesLP NULL
#define dma_get_required_mask_pSeriesLP NULL
#endif /* !CONFIG_PCI */
static int iommu_mem_notifier(struct notifier_block *nb, unsigned long action,
void *data)
{
struct direct_window *window;
struct memory_notify *arg = data;
int ret = 0;
switch (action) {
case MEM_GOING_ONLINE:
spin_lock(&direct_window_list_lock);
list_for_each_entry(window, &direct_window_list, list) {
ret |= tce_setrange_multi_pSeriesLP(arg->start_pfn,
arg->nr_pages, window->prop);
/* XXX log error */
}
spin_unlock(&direct_window_list_lock);
break;
case MEM_CANCEL_ONLINE:
case MEM_OFFLINE:
spin_lock(&direct_window_list_lock);
list_for_each_entry(window, &direct_window_list, list) {
ret |= tce_clearrange_multi_pSeriesLP(arg->start_pfn,
arg->nr_pages, window->prop);
/* XXX log error */
}
spin_unlock(&direct_window_list_lock);
break;
default:
break;
}
if (ret && action != MEM_CANCEL_ONLINE)
return NOTIFY_BAD;
return NOTIFY_OK;
}
static struct notifier_block iommu_mem_nb = {
.notifier_call = iommu_mem_notifier,
};
static int iommu_reconfig_notifier(struct notifier_block *nb, unsigned long action, void *data)
{
int err = NOTIFY_OK;
struct of_reconfig_data *rd = data;
struct device_node *np = rd->dn;
struct pci_dn *pci = PCI_DN(np);
struct direct_window *window;
switch (action) {
case OF_RECONFIG_DETACH_NODE:
powerpc/pseries: Avoid deadlock on removing ddw Function remove_ddw() could be called in of_reconfig_notifier and we potentially remove the dynamic DMA window property, which invokes of_reconfig_notifier again. Eventually, it leads to the deadlock as following backtrace shows. The patch fixes the above issue by deferring releasing the dynamic DMA window property while releasing the device node. ============================================= [ INFO: possible recursive locking detected ] 3.16.0+ #428 Tainted: G W --------------------------------------------- drmgr/2273 is trying to acquire lock: ((of_reconfig_chain).rwsem){.+.+..}, at: [<c000000000091890>] \ .__blocking_notifier_call_chain+0x40/0x78 but task is already holding lock: ((of_reconfig_chain).rwsem){.+.+..}, at: [<c000000000091890>] \ .__blocking_notifier_call_chain+0x40/0x78 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock((of_reconfig_chain).rwsem); lock((of_reconfig_chain).rwsem); *** DEADLOCK *** May be due to missing lock nesting notation 2 locks held by drmgr/2273: #0: (sb_writers#4){.+.+.+}, at: [<c0000000001cbe70>] \ .vfs_write+0xb0/0x1f8 #1: ((of_reconfig_chain).rwsem){.+.+..}, at: [<c000000000091890>] \ .__blocking_notifier_call_chain+0x40/0x78 stack backtrace: CPU: 17 PID: 2273 Comm: drmgr Tainted: G W 3.16.0+ #428 Call Trace: [c0000000137e7000] [c000000000013d9c] .show_stack+0x88/0x148 (unreliable) [c0000000137e70b0] [c00000000083cd34] .dump_stack+0x7c/0x9c [c0000000137e7130] [c0000000000b8afc] .__lock_acquire+0x128c/0x1c68 [c0000000137e7280] [c0000000000b9a4c] .lock_acquire+0xe8/0x104 [c0000000137e7350] [c00000000083588c] .down_read+0x4c/0x90 [c0000000137e73e0] [c000000000091890] .__blocking_notifier_call_chain+0x40/0x78 [c0000000137e7490] [c000000000091900] .blocking_notifier_call_chain+0x38/0x48 [c0000000137e7520] [c000000000682a28] .of_reconfig_notify+0x34/0x5c [c0000000137e75b0] [c000000000682a9c] .of_property_notify+0x4c/0x54 [c0000000137e7650] [c000000000682bf0] .of_remove_property+0x30/0xd4 [c0000000137e76f0] [c000000000052a44] .remove_ddw+0x144/0x168 [c0000000137e7790] [c000000000053204] .iommu_reconfig_notifier+0x30/0xe0 [c0000000137e7820] [c00000000009137c] .notifier_call_chain+0x6c/0xb4 [c0000000137e78c0] [c0000000000918ac] .__blocking_notifier_call_chain+0x5c/0x78 [c0000000137e7970] [c000000000091900] .blocking_notifier_call_chain+0x38/0x48 [c0000000137e7a00] [c000000000682a28] .of_reconfig_notify+0x34/0x5c [c0000000137e7a90] [c000000000682e14] .of_detach_node+0x44/0x1fc [c0000000137e7b40] [c0000000000518e4] .ofdt_write+0x3ac/0x688 [c0000000137e7c20] [c000000000238430] .proc_reg_write+0xb8/0xd4 [c0000000137e7cd0] [c0000000001cbeac] .vfs_write+0xec/0x1f8 [c0000000137e7d70] [c0000000001cc3b0] .SyS_write+0x58/0xa0 [c0000000137e7e30] [c00000000000a064] syscall_exit+0x0/0x98 Cc: stable@vger.kernel.org Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-08-11 17:16:20 +08:00
/*
* Removing the property will invoke the reconfig
* notifier again, which causes dead-lock on the
* read-write semaphore of the notifier chain. So
* we have to remove the property when releasing
* the device node.
*/
remove_ddw(np, false);
if (pci && pci->iommu_table)
iommu_pseries_free_table(pci->iommu_table,
np->full_name);
spin_lock(&direct_window_list_lock);
list_for_each_entry(window, &direct_window_list, list) {
if (window->device == np) {
list_del(&window->list);
kfree(window);
break;
}
}
spin_unlock(&direct_window_list_lock);
break;
default:
err = NOTIFY_DONE;
break;
}
return err;
}
static struct notifier_block iommu_reconfig_nb = {
.notifier_call = iommu_reconfig_notifier,
};
/* These are called very early. */
void iommu_init_early_pSeries(void)
{
if (of_chosen && of_get_property(of_chosen, "linux,iommu-off", NULL))
return;
if (firmware_has_feature(FW_FEATURE_LPAR)) {
pseries_pci_controller_ops.dma_bus_setup = pci_dma_bus_setup_pSeriesLP;
pseries_pci_controller_ops.dma_dev_setup = pci_dma_dev_setup_pSeriesLP;
ppc_md.dma_set_mask = dma_set_mask_pSeriesLP;
ppc_md.dma_get_required_mask = dma_get_required_mask_pSeriesLP;
} else {
pseries_pci_controller_ops.dma_bus_setup = pci_dma_bus_setup_pSeries;
pseries_pci_controller_ops.dma_dev_setup = pci_dma_dev_setup_pSeries;
}
of_reconfig_notifier_register(&iommu_reconfig_nb);
register_memory_notifier(&iommu_mem_nb);
set_pci_dma_ops(&dma_iommu_ops);
}
static int __init disable_multitce(char *str)
{
if (strcmp(str, "off") == 0 &&
firmware_has_feature(FW_FEATURE_LPAR) &&
firmware_has_feature(FW_FEATURE_MULTITCE)) {
printk(KERN_INFO "Disabling MULTITCE firmware feature\n");
powerpc_firmware_features &= ~FW_FEATURE_MULTITCE;
}
return 1;
}
__setup("multitce=", disable_multitce);
machine_subsys_initcall_sync(pseries, tce_iommu_bus_notifier_init);