OpenCloudOS-Kernel/arch/mn10300/kernel/time.c

/* MN10300 Low level time management
 *
 * Copyright (C) 2007-2008 Red Hat, Inc. All Rights Reserved.
 * Written by David Howells (dhowells@redhat.com)
 * - Derived from arch/i386/kernel/time.c
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public Licence
 * as published by the Free Software Foundation; either version
 * 2 of the Licence, or (at your option) any later version.
 */
#include <linux/sched.h>
#include <linux/kernel.h>
#include <linux/interrupt.h>
#include <linux/time.h>
#include <linux/init.h>
#include <linux/smp.h>
#include <linux/profile.h>
#include <linux/cnt32_to_63.h>
#include <linux/clocksource.h>
#include <linux/clockchips.h>
#include <asm/irq.h>
#include <asm/div64.h>
#include <asm/processor.h>
#include <asm/intctl-regs.h>
#include <asm/rtc.h>
#include "internal.h"

static unsigned long mn10300_last_tsc;	/* time-stamp counter at last time
					 * interrupt occurred */

static unsigned long sched_clock_multiplier;

/*
 * scheduler clock - returns current time in nanosec units.
 */
unsigned long long sched_clock(void)
{
	union {
		unsigned long long ll;
		unsigned l[2];
	} tsc64, result;
	unsigned long tsc, tmp;
	unsigned product[3]; /* 96-bit intermediate value */

	/* cnt32_to_63() is not safe with preemption */
	preempt_disable();

	/* read the TSC value
	 */
	tsc = get_cycles();

	/* expand to 64-bits.
	 * - sched_clock() must be called once a minute or better or the
	 *   following will go horribly wrong - see cnt32_to_63()
	 */
	tsc64.ll = cnt32_to_63(tsc) & 0x7fffffffffffffffULL;

	preempt_enable();

	/* scale the 64-bit TSC value to a nanosecond value via a 96-bit
	 * intermediate
	 */
	asm("mulu	%2,%0,%3,%0	\n"	/* LSW * mult ->  0:%3:%0 */
	    "mulu	%2,%1,%2,%1	\n"	/* MSW * mult -> %2:%1:0 */
	    "add	%3,%1		\n"
	    "addc	0,%2		\n"	/* result in %2:%1:%0 */
	    : "=r"(product[0]), "=r"(product[1]), "=r"(product[2]), "=r"(tmp)
	    :  "0"(tsc64.l[0]),  "1"(tsc64.l[1]),  "2"(sched_clock_multiplier)
	    : "cc");

	result.l[0] = product[1] << 16 | product[0] >> 16;
	result.l[1] = product[2] << 16 | product[1] >> 16;

	return result.ll;
}

/*
 * initialise the scheduler clock
 */
static void __init mn10300_sched_clock_init(void)
{
	sched_clock_multiplier =
		__muldiv64u(NSEC_PER_SEC, 1 << 16, MN10300_TSCCLK);
}

/**
 * local_timer_interrupt - Local timer interrupt handler
 *
 * Handle local timer interrupts for this CPU.  They may have been propagated
 * to this CPU from the CPU that actually gets them by way of an IPI.
 */
irqreturn_t local_timer_interrupt(void)
{
	profile_tick(CPU_PROFILING);
	update_process_times(user_mode(get_irq_regs()));
	return IRQ_HANDLED;
}

#ifndef CONFIG_GENERIC_TIME
/*
 * advance the kernel's time keeping clocks (xtime and jiffies)
 * - we use Timer 0 & 1 cascaded as a clock to nudge us the next time
 *   there's a need to update
 */
static irqreturn_t timer_interrupt(int irq, void *dev_id)
{
	unsigned tsc, elapse;
	irqreturn_t ret;

	write_seqlock(&xtime_lock);

	while (tsc = get_cycles(),
	       elapse = tsc - mn10300_last_tsc, /* time elapsed since last
						 * tick */
	       elapse > MN10300_TSC_PER_HZ
	       ) {
		mn10300_last_tsc += MN10300_TSC_PER_HZ;

		/* advance the kernel's time tracking system */
		do_timer(1);
	}

	write_sequnlock(&xtime_lock);

	ret = local_timer_interrupt();
#ifdef CONFIG_SMP
	send_IPI_allbutself(LOCAL_TIMER_IPI);
#endif
	return ret;
}

static struct irqaction timer_irq = {
	.handler	= timer_interrupt,
	.flags		= IRQF_DISABLED | IRQF_SHARED | IRQF_TIMER,
	.name		= "timer",
};
#endif /* CONFIG_GENERIC_TIME */

#ifdef CONFIG_CSRC_MN10300
void __init clocksource_set_clock(struct clocksource *cs, unsigned int clock)
{
	u64 temp;
	u32 shift;

	/* Find a shift value */
	for (shift = 32; shift > 0; shift--) {
		temp = (u64) NSEC_PER_SEC << shift;
		do_div(temp, clock);
		if ((temp >> 32) == 0)
			break;
	}
	cs->shift = shift;
	cs->mult = (u32) temp;
}
#endif

#if CONFIG_CEVT_MN10300
void __cpuinit clockevent_set_clock(struct clock_event_device *cd,
				    unsigned int clock)
{
	u64 temp;
	u32 shift;

	/* Find a shift value */
	for (shift = 32; shift > 0; shift--) {
		temp = (u64) clock << shift;
		do_div(temp, NSEC_PER_SEC);
		if ((temp >> 32) == 0)
			break;
	}
	cd->shift = shift;
	cd->mult = (u32) temp;
}
#endif

/*
 * initialise the various timers used by the main part of the kernel
 */
void __init time_init(void)
{
	/* we need the prescalar running to be able to use IOCLK/8
	 * - IOCLK runs at 1/4 (ST5 open) or 1/8 (ST5 closed) internal CPU clock
	 * - IOCLK runs at Fosc rate (crystal speed)
	 */
	TMPSCNT |= TMPSCNT_ENABLE;

#ifdef CONFIG_GENERIC_TIME
	init_clocksource();
#else
	startup_timestamp_counter();
#endif

	printk(KERN_INFO
	       "timestamp counter I/O clock running at %lu.%02lu"
	       " (calibrated against RTC)\n",
	       MN10300_TSCCLK / 1000000, (MN10300_TSCCLK / 10000) % 100);

	mn10300_last_tsc = read_timestamp_counter();

#ifdef CONFIG_GENERIC_CLOCKEVENTS
	init_clockevents();
#else
	reload_jiffies_counter(MN10300_JC_PER_HZ - 1);
	setup_jiffies_interrupt(TMJCIRQ, &timer_irq, CONFIG_TIMER_IRQ_LEVEL);
#endif

#ifdef CONFIG_MN10300_WD_TIMER
	/* start the watchdog timer */
	watchdog_go();
#endif

	mn10300_sched_clock_init();
}