OpenCloudOS-Kernel/fs/xfs/libxfs/xfs_defer.c

933 lines
28 KiB
C
Raw Normal View History

// SPDX-License-Identifier: GPL-2.0+
/*
* Copyright (C) 2016 Oracle. All Rights Reserved.
* Author: Darrick J. Wong <darrick.wong@oracle.com>
*/
#include "xfs.h"
#include "xfs_fs.h"
#include "xfs_shared.h"
#include "xfs_format.h"
#include "xfs_log_format.h"
#include "xfs_trans_resv.h"
#include "xfs_mount.h"
#include "xfs_defer.h"
#include "xfs_trans.h"
#include "xfs_buf_item.h"
#include "xfs_inode.h"
#include "xfs_inode_item.h"
#include "xfs_trace.h"
#include "xfs_icache.h"
xfs: periodically relog deferred intent items There's a subtle design flaw in the deferred log item code that can lead to pinning the log tail. Taking up the defer ops chain examples from the previous commit, we can get trapped in sequences like this: Caller hands us a transaction t0 with D0-D3 attached. The defer ops chain will look like the following if the transaction rolls succeed: t1: D0(t0), D1(t0), D2(t0), D3(t0) t2: d4(t1), d5(t1), D1(t0), D2(t0), D3(t0) t3: d5(t1), D1(t0), D2(t0), D3(t0) ... t9: d9(t7), D3(t0) t10: D3(t0) t11: d10(t10), d11(t10) t12: d11(t10) In transaction 9, we finish d9 and try to roll to t10 while holding onto an intent item for D3 that we logged in t0. The previous commit changed the order in which we place new defer ops in the defer ops processing chain to reduce the maximum chain length. Now make xfs_defer_finish_noroll capable of relogging the entire chain periodically so that we can always move the log tail forward. Most chains will never get relogged, except for operations that generate very long chains (large extents containing many blocks with different sharing levels) or are on filesystems with small logs and a lot of ongoing metadata updates. Callers are now required to ensure that the transaction reservation is large enough to handle logging done items and new intent items for the maximum possible chain length. Most callers are careful to keep the chain lengths low, so the overhead should be minimal. The decision to relog an intent item is made based on whether the intent was logged in a previous checkpoint, since there's no point in relogging an intent into the same checkpoint. Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Brian Foster <bfoster@redhat.com>
2020-09-28 07:18:13 +08:00
#include "xfs_log.h"
#include "xfs_rmap.h"
#include "xfs_refcount.h"
#include "xfs_bmap.h"
#include "xfs_alloc.h"
#include "xfs_buf.h"
#include "xfs_da_format.h"
#include "xfs_da_btree.h"
xfs: Set up infrastructure for log attribute replay Currently attributes are modified directly across one or more transactions. But they are not logged or replayed in the event of an error. The goal of log attr replay is to enable logging and replaying of attribute operations using the existing delayed operations infrastructure. This will later enable the attributes to become part of larger multi part operations that also must first be recorded to the log. This is mostly of interest in the scheme of parent pointers which would need to maintain an attribute containing parent inode information any time an inode is moved, created, or removed. Parent pointers would then be of interest to any feature that would need to quickly derive an inode path from the mount point. Online scrub, nfs lookups and fs grow or shrink operations are all features that could take advantage of this. This patch adds two new log item types for setting or removing attributes as deferred operations. The xfs_attri_log_item will log an intent to set or remove an attribute. The corresponding xfs_attrd_log_item holds a reference to the xfs_attri_log_item and is freed once the transaction is done. Both log items use a generic xfs_attr_log_format structure that contains the attribute name, value, flags, inode, and an op_flag that indicates if the operations is a set or remove. [dchinner: added extra little bits needed for intent whiteouts] Signed-off-by: Allison Henderson <allison.henderson@oracle.com> Reviewed-by: Chandan Babu R <chandanrlinux@gmail.com> Reviewed-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Dave Chinner <david@fromorbit.com>
2022-05-04 10:41:02 +08:00
#include "xfs_attr.h"
static struct kmem_cache *xfs_defer_pending_cache;
/*
* Deferred Operations in XFS
*
* Due to the way locking rules work in XFS, certain transactions (block
* mapping and unmapping, typically) have permanent reservations so that
* we can roll the transaction to adhere to AG locking order rules and
* to unlock buffers between metadata updates. Prior to rmap/reflink,
* the mapping code had a mechanism to perform these deferrals for
* extents that were going to be freed; this code makes that facility
* more generic.
*
* When adding the reverse mapping and reflink features, it became
* necessary to perform complex remapping multi-transactions to comply
* with AG locking order rules, and to be able to spread a single
* refcount update operation (an operation on an n-block extent can
* update as many as n records!) among multiple transactions. XFS can
* roll a transaction to facilitate this, but using this facility
* requires us to log "intent" items in case log recovery needs to
* redo the operation, and to log "done" items to indicate that redo
* is not necessary.
*
* Deferred work is tracked in xfs_defer_pending items. Each pending
* item tracks one type of deferred work. Incoming work items (which
* have not yet had an intent logged) are attached to a pending item
* on the dop_intake list, where they wait for the caller to finish
* the deferred operations.
*
* Finishing a set of deferred operations is an involved process. To
* start, we define "rolling a deferred-op transaction" as follows:
*
* > For each xfs_defer_pending item on the dop_intake list,
* - Sort the work items in AG order. XFS locking
* order rules require us to lock buffers in AG order.
* - Create a log intent item for that type.
* - Attach it to the pending item.
* - Move the pending item from the dop_intake list to the
* dop_pending list.
* > Roll the transaction.
*
* NOTE: To avoid exceeding the transaction reservation, we limit the
* number of items that we attach to a given xfs_defer_pending.
*
* The actual finishing process looks like this:
*
* > For each xfs_defer_pending in the dop_pending list,
* - Roll the deferred-op transaction as above.
* - Create a log done item for that type, and attach it to the
* log intent item.
* - For each work item attached to the log intent item,
* * Perform the described action.
* * Attach the work item to the log done item.
* * If the result of doing the work was -EAGAIN, ->finish work
* wants a new transaction. See the "Requesting a Fresh
* Transaction while Finishing Deferred Work" section below for
* details.
*
* The key here is that we must log an intent item for all pending
* work items every time we roll the transaction, and that we must log
* a done item as soon as the work is completed. With this mechanism
* we can perform complex remapping operations, chaining intent items
* as needed.
*
* Requesting a Fresh Transaction while Finishing Deferred Work
*
* If ->finish_item decides that it needs a fresh transaction to
* finish the work, it must ask its caller (xfs_defer_finish) for a
* continuation. The most likely cause of this circumstance are the
* refcount adjust functions deciding that they've logged enough items
* to be at risk of exceeding the transaction reservation.
*
* To get a fresh transaction, we want to log the existing log done
* item to prevent the log intent item from replaying, immediately log
* a new log intent item with the unfinished work items, roll the
* transaction, and re-call ->finish_item wherever it left off. The
* log done item and the new log intent item must be in the same
* transaction or atomicity cannot be guaranteed; defer_finish ensures
* that this happens.
*
* This requires some coordination between ->finish_item and
* defer_finish. Upon deciding to request a new transaction,
* ->finish_item should update the current work item to reflect the
* unfinished work. Next, it should reset the log done item's list
* count to the number of items finished, and return -EAGAIN.
* defer_finish sees the -EAGAIN, logs the new log intent item
* with the remaining work items, and leaves the xfs_defer_pending
* item at the head of the dop_work queue. Then it rolls the
* transaction and picks up processing where it left off. It is
* required that ->finish_item must be careful to leave enough
* transaction reservation to fit the new log intent item.
*
* This is an example of remapping the extent (E, E+B) into file X at
* offset A and dealing with the extent (C, C+B) already being mapped
* there:
* +-------------------------------------------------+
* | Unmap file X startblock C offset A length B | t0
* | Intent to reduce refcount for extent (C, B) |
* | Intent to remove rmap (X, C, A, B) |
* | Intent to free extent (D, 1) (bmbt block) |
* | Intent to map (X, A, B) at startblock E |
* +-------------------------------------------------+
* | Map file X startblock E offset A length B | t1
* | Done mapping (X, E, A, B) |
* | Intent to increase refcount for extent (E, B) |
* | Intent to add rmap (X, E, A, B) |
* +-------------------------------------------------+
* | Reduce refcount for extent (C, B) | t2
* | Done reducing refcount for extent (C, 9) |
* | Intent to reduce refcount for extent (C+9, B-9) |
* | (ran out of space after 9 refcount updates) |
* +-------------------------------------------------+
* | Reduce refcount for extent (C+9, B+9) | t3
* | Done reducing refcount for extent (C+9, B-9) |
* | Increase refcount for extent (E, B) |
* | Done increasing refcount for extent (E, B) |
* | Intent to free extent (C, B) |
* | Intent to free extent (F, 1) (refcountbt block) |
* | Intent to remove rmap (F, 1, REFC) |
* +-------------------------------------------------+
* | Remove rmap (X, C, A, B) | t4
* | Done removing rmap (X, C, A, B) |
* | Add rmap (X, E, A, B) |
* | Done adding rmap (X, E, A, B) |
* | Remove rmap (F, 1, REFC) |
* | Done removing rmap (F, 1, REFC) |
* +-------------------------------------------------+
* | Free extent (C, B) | t5
* | Done freeing extent (C, B) |
* | Free extent (D, 1) |
* | Done freeing extent (D, 1) |
* | Free extent (F, 1) |
* | Done freeing extent (F, 1) |
* +-------------------------------------------------+
*
* If we should crash before t2 commits, log recovery replays
* the following intent items:
*
* - Intent to reduce refcount for extent (C, B)
* - Intent to remove rmap (X, C, A, B)
* - Intent to free extent (D, 1) (bmbt block)
* - Intent to increase refcount for extent (E, B)
* - Intent to add rmap (X, E, A, B)
*
* In the process of recovering, it should also generate and take care
* of these intent items:
*
* - Intent to free extent (C, B)
* - Intent to free extent (F, 1) (refcountbt block)
* - Intent to remove rmap (F, 1, REFC)
*
* Note that the continuation requested between t2 and t3 is likely to
* reoccur.
*/
static const struct xfs_defer_op_type *defer_op_types[] = {
[XFS_DEFER_OPS_TYPE_BMAP] = &xfs_bmap_update_defer_type,
[XFS_DEFER_OPS_TYPE_REFCOUNT] = &xfs_refcount_update_defer_type,
[XFS_DEFER_OPS_TYPE_RMAP] = &xfs_rmap_update_defer_type,
[XFS_DEFER_OPS_TYPE_FREE] = &xfs_extent_free_defer_type,
[XFS_DEFER_OPS_TYPE_AGFL_FREE] = &xfs_agfl_free_defer_type,
[XFS_DEFER_OPS_TYPE_ATTR] = &xfs_attr_defer_type,
};
xfs: share xattr name and value buffers when logging xattr updates While running xfs/297 and generic/642, I noticed a crash in xfs_attri_item_relog when it tries to copy the attr name to the new xattri log item. I think what happened here was that we called ->iop_commit on the old attri item (which nulls out the pointers) as part of a log force at the same time that a chained attr operation was ongoing. The system was busy enough that at some later point, the defer ops operation decided it was necessary to relog the attri log item, but as we've detached the name buffer from the old attri log item, we can't copy it to the new one, and kaboom. I think there's a broader refcounting problem with LARP mode -- the setxattr code can return to userspace before the CIL actually formats and commits the log item, which results in a UAF bug. Therefore, the xattr log item needs to be able to retain a reference to the name and value buffers until the log items have completely cleared the log. Furthermore, each time we create an intent log item, we allocate new memory and (re)copy the contents; sharing here would be very useful. Solve the UAF and the unnecessary memory allocations by having the log code create a single refcounted buffer to contain the name and value contents. This buffer can be passed from old to new during a relog operation, and the logging code can (optionally) attach it to the xfs_attr_item for reuse when LARP mode is enabled. This also fixes a problem where the xfs_attri_log_item objects weren't being freed back to the same cache where they came from. Signed-off-by: Darrick J. Wong <djwong@kernel.org> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2022-05-23 06:43:46 +08:00
/*
* Ensure there's a log intent item associated with this deferred work item if
* the operation must be restarted on crash. Returns 1 if there's a log item;
* 0 if there isn't; or a negative errno.
*/
static int
xfs_defer_create_intent(
struct xfs_trans *tp,
struct xfs_defer_pending *dfp,
bool sort)
{
const struct xfs_defer_op_type *ops = defer_op_types[dfp->dfp_type];
xfs: share xattr name and value buffers when logging xattr updates While running xfs/297 and generic/642, I noticed a crash in xfs_attri_item_relog when it tries to copy the attr name to the new xattri log item. I think what happened here was that we called ->iop_commit on the old attri item (which nulls out the pointers) as part of a log force at the same time that a chained attr operation was ongoing. The system was busy enough that at some later point, the defer ops operation decided it was necessary to relog the attri log item, but as we've detached the name buffer from the old attri log item, we can't copy it to the new one, and kaboom. I think there's a broader refcounting problem with LARP mode -- the setxattr code can return to userspace before the CIL actually formats and commits the log item, which results in a UAF bug. Therefore, the xattr log item needs to be able to retain a reference to the name and value buffers until the log items have completely cleared the log. Furthermore, each time we create an intent log item, we allocate new memory and (re)copy the contents; sharing here would be very useful. Solve the UAF and the unnecessary memory allocations by having the log code create a single refcounted buffer to contain the name and value contents. This buffer can be passed from old to new during a relog operation, and the logging code can (optionally) attach it to the xfs_attr_item for reuse when LARP mode is enabled. This also fixes a problem where the xfs_attri_log_item objects weren't being freed back to the same cache where they came from. Signed-off-by: Darrick J. Wong <djwong@kernel.org> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2022-05-23 06:43:46 +08:00
struct xfs_log_item *lip;
xfs: share xattr name and value buffers when logging xattr updates While running xfs/297 and generic/642, I noticed a crash in xfs_attri_item_relog when it tries to copy the attr name to the new xattri log item. I think what happened here was that we called ->iop_commit on the old attri item (which nulls out the pointers) as part of a log force at the same time that a chained attr operation was ongoing. The system was busy enough that at some later point, the defer ops operation decided it was necessary to relog the attri log item, but as we've detached the name buffer from the old attri log item, we can't copy it to the new one, and kaboom. I think there's a broader refcounting problem with LARP mode -- the setxattr code can return to userspace before the CIL actually formats and commits the log item, which results in a UAF bug. Therefore, the xattr log item needs to be able to retain a reference to the name and value buffers until the log items have completely cleared the log. Furthermore, each time we create an intent log item, we allocate new memory and (re)copy the contents; sharing here would be very useful. Solve the UAF and the unnecessary memory allocations by having the log code create a single refcounted buffer to contain the name and value contents. This buffer can be passed from old to new during a relog operation, and the logging code can (optionally) attach it to the xfs_attr_item for reuse when LARP mode is enabled. This also fixes a problem where the xfs_attri_log_item objects weren't being freed back to the same cache where they came from. Signed-off-by: Darrick J. Wong <djwong@kernel.org> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2022-05-23 06:43:46 +08:00
if (dfp->dfp_intent)
return 1;
lip = ops->create_intent(tp, &dfp->dfp_work, dfp->dfp_count, sort);
if (!lip)
return 0;
if (IS_ERR(lip))
return PTR_ERR(lip);
dfp->dfp_intent = lip;
return 1;
}
/*
* For each pending item in the intake list, log its intent item and the
* associated extents, then add the entire intake list to the end of
* the pending list.
xfs: share xattr name and value buffers when logging xattr updates While running xfs/297 and generic/642, I noticed a crash in xfs_attri_item_relog when it tries to copy the attr name to the new xattri log item. I think what happened here was that we called ->iop_commit on the old attri item (which nulls out the pointers) as part of a log force at the same time that a chained attr operation was ongoing. The system was busy enough that at some later point, the defer ops operation decided it was necessary to relog the attri log item, but as we've detached the name buffer from the old attri log item, we can't copy it to the new one, and kaboom. I think there's a broader refcounting problem with LARP mode -- the setxattr code can return to userspace before the CIL actually formats and commits the log item, which results in a UAF bug. Therefore, the xattr log item needs to be able to retain a reference to the name and value buffers until the log items have completely cleared the log. Furthermore, each time we create an intent log item, we allocate new memory and (re)copy the contents; sharing here would be very useful. Solve the UAF and the unnecessary memory allocations by having the log code create a single refcounted buffer to contain the name and value contents. This buffer can be passed from old to new during a relog operation, and the logging code can (optionally) attach it to the xfs_attr_item for reuse when LARP mode is enabled. This also fixes a problem where the xfs_attri_log_item objects weren't being freed back to the same cache where they came from. Signed-off-by: Darrick J. Wong <djwong@kernel.org> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2022-05-23 06:43:46 +08:00
*
* Returns 1 if at least one log item was associated with the deferred work;
* 0 if there are no log items; or a negative errno.
*/
xfs: share xattr name and value buffers when logging xattr updates While running xfs/297 and generic/642, I noticed a crash in xfs_attri_item_relog when it tries to copy the attr name to the new xattri log item. I think what happened here was that we called ->iop_commit on the old attri item (which nulls out the pointers) as part of a log force at the same time that a chained attr operation was ongoing. The system was busy enough that at some later point, the defer ops operation decided it was necessary to relog the attri log item, but as we've detached the name buffer from the old attri log item, we can't copy it to the new one, and kaboom. I think there's a broader refcounting problem with LARP mode -- the setxattr code can return to userspace before the CIL actually formats and commits the log item, which results in a UAF bug. Therefore, the xattr log item needs to be able to retain a reference to the name and value buffers until the log items have completely cleared the log. Furthermore, each time we create an intent log item, we allocate new memory and (re)copy the contents; sharing here would be very useful. Solve the UAF and the unnecessary memory allocations by having the log code create a single refcounted buffer to contain the name and value contents. This buffer can be passed from old to new during a relog operation, and the logging code can (optionally) attach it to the xfs_attr_item for reuse when LARP mode is enabled. This also fixes a problem where the xfs_attri_log_item objects weren't being freed back to the same cache where they came from. Signed-off-by: Darrick J. Wong <djwong@kernel.org> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2022-05-23 06:43:46 +08:00
static int
xfs_defer_create_intents(
struct xfs_trans *tp)
{
struct xfs_defer_pending *dfp;
xfs: share xattr name and value buffers when logging xattr updates While running xfs/297 and generic/642, I noticed a crash in xfs_attri_item_relog when it tries to copy the attr name to the new xattri log item. I think what happened here was that we called ->iop_commit on the old attri item (which nulls out the pointers) as part of a log force at the same time that a chained attr operation was ongoing. The system was busy enough that at some later point, the defer ops operation decided it was necessary to relog the attri log item, but as we've detached the name buffer from the old attri log item, we can't copy it to the new one, and kaboom. I think there's a broader refcounting problem with LARP mode -- the setxattr code can return to userspace before the CIL actually formats and commits the log item, which results in a UAF bug. Therefore, the xattr log item needs to be able to retain a reference to the name and value buffers until the log items have completely cleared the log. Furthermore, each time we create an intent log item, we allocate new memory and (re)copy the contents; sharing here would be very useful. Solve the UAF and the unnecessary memory allocations by having the log code create a single refcounted buffer to contain the name and value contents. This buffer can be passed from old to new during a relog operation, and the logging code can (optionally) attach it to the xfs_attr_item for reuse when LARP mode is enabled. This also fixes a problem where the xfs_attri_log_item objects weren't being freed back to the same cache where they came from. Signed-off-by: Darrick J. Wong <djwong@kernel.org> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2022-05-23 06:43:46 +08:00
int ret = 0;
list_for_each_entry(dfp, &tp->t_dfops, dfp_list) {
xfs: share xattr name and value buffers when logging xattr updates While running xfs/297 and generic/642, I noticed a crash in xfs_attri_item_relog when it tries to copy the attr name to the new xattri log item. I think what happened here was that we called ->iop_commit on the old attri item (which nulls out the pointers) as part of a log force at the same time that a chained attr operation was ongoing. The system was busy enough that at some later point, the defer ops operation decided it was necessary to relog the attri log item, but as we've detached the name buffer from the old attri log item, we can't copy it to the new one, and kaboom. I think there's a broader refcounting problem with LARP mode -- the setxattr code can return to userspace before the CIL actually formats and commits the log item, which results in a UAF bug. Therefore, the xattr log item needs to be able to retain a reference to the name and value buffers until the log items have completely cleared the log. Furthermore, each time we create an intent log item, we allocate new memory and (re)copy the contents; sharing here would be very useful. Solve the UAF and the unnecessary memory allocations by having the log code create a single refcounted buffer to contain the name and value contents. This buffer can be passed from old to new during a relog operation, and the logging code can (optionally) attach it to the xfs_attr_item for reuse when LARP mode is enabled. This also fixes a problem where the xfs_attri_log_item objects weren't being freed back to the same cache where they came from. Signed-off-by: Darrick J. Wong <djwong@kernel.org> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2022-05-23 06:43:46 +08:00
int ret2;
trace_xfs_defer_create_intent(tp->t_mountp, dfp);
xfs: share xattr name and value buffers when logging xattr updates While running xfs/297 and generic/642, I noticed a crash in xfs_attri_item_relog when it tries to copy the attr name to the new xattri log item. I think what happened here was that we called ->iop_commit on the old attri item (which nulls out the pointers) as part of a log force at the same time that a chained attr operation was ongoing. The system was busy enough that at some later point, the defer ops operation decided it was necessary to relog the attri log item, but as we've detached the name buffer from the old attri log item, we can't copy it to the new one, and kaboom. I think there's a broader refcounting problem with LARP mode -- the setxattr code can return to userspace before the CIL actually formats and commits the log item, which results in a UAF bug. Therefore, the xattr log item needs to be able to retain a reference to the name and value buffers until the log items have completely cleared the log. Furthermore, each time we create an intent log item, we allocate new memory and (re)copy the contents; sharing here would be very useful. Solve the UAF and the unnecessary memory allocations by having the log code create a single refcounted buffer to contain the name and value contents. This buffer can be passed from old to new during a relog operation, and the logging code can (optionally) attach it to the xfs_attr_item for reuse when LARP mode is enabled. This also fixes a problem where the xfs_attri_log_item objects weren't being freed back to the same cache where they came from. Signed-off-by: Darrick J. Wong <djwong@kernel.org> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2022-05-23 06:43:46 +08:00
ret2 = xfs_defer_create_intent(tp, dfp, true);
if (ret2 < 0)
return ret2;
ret |= ret2;
}
return ret;
}
/* Abort all the intents that were committed. */
STATIC void
xfs_defer_trans_abort(
struct xfs_trans *tp,
struct list_head *dop_pending)
{
struct xfs_defer_pending *dfp;
const struct xfs_defer_op_type *ops;
trace_xfs_defer_trans_abort(tp, _RET_IP_);
/* Abort intent items that don't have a done item. */
list_for_each_entry(dfp, dop_pending, dfp_list) {
ops = defer_op_types[dfp->dfp_type];
trace_xfs_defer_pending_abort(tp->t_mountp, dfp);
if (dfp->dfp_intent && !dfp->dfp_done) {
ops->abort_intent(dfp->dfp_intent);
dfp->dfp_intent = NULL;
}
}
}
/*
* Capture resources that the caller said not to release ("held") when the
* transaction commits. Caller is responsible for zero-initializing @dres.
*/
static int
xfs_defer_save_resources(
struct xfs_defer_resources *dres,
struct xfs_trans *tp)
{
struct xfs_buf_log_item *bli;
struct xfs_inode_log_item *ili;
struct xfs_log_item *lip;
BUILD_BUG_ON(NBBY * sizeof(dres->dr_ordered) < XFS_DEFER_OPS_NR_BUFS);
xfs: use ordered buffers to initialize dquot buffers during quotacheck While QAing the new xfs_repair quotacheck code, I uncovered a quota corruption bug resulting from a bad interaction between dquot buffer initialization and quotacheck. The bug can be reproduced with the following sequence: # mkfs.xfs -f /dev/sdf # mount /dev/sdf /opt -o usrquota # su nobody -s /bin/bash -c 'touch /opt/barf' # sync # xfs_quota -x -c 'report -ahi' /opt User quota on /opt (/dev/sdf) Inodes User ID Used Soft Hard Warn/Grace ---------- --------------------------------- root 3 0 0 00 [------] nobody 1 0 0 00 [------] # xfs_io -x -c 'shutdown' /opt # umount /opt # mount /dev/sdf /opt -o usrquota # touch /opt/man2 # xfs_quota -x -c 'report -ahi' /opt User quota on /opt (/dev/sdf) Inodes User ID Used Soft Hard Warn/Grace ---------- --------------------------------- root 1 0 0 00 [------] nobody 1 0 0 00 [------] # umount /opt Notice how the initial quotacheck set the root dquot icount to 3 (rootino, rbmino, rsumino), but after shutdown -> remount -> recovery, xfs_quota reports that the root dquot has only 1 icount. We haven't deleted anything from the filesystem, which means that quota is now under-counting. This behavior is not limited to icount or the root dquot, but this is the shortest reproducer. I traced the cause of this discrepancy to the way that we handle ondisk dquot updates during quotacheck vs. regular fs activity. Normally, when we allocate a disk block for a dquot, we log the buffer as a regular (dquot) buffer. Subsequent updates to the dquots backed by that block are done via separate dquot log item updates, which means that they depend on the logged buffer update being written to disk before the dquot items. Because individual dquots have their own LSN fields, that initial dquot buffer must always be recovered. However, the story changes for quotacheck, which can cause dquot block allocations but persists the final dquot counter values via a delwri list. Because recovery doesn't gate dquot buffer replay on an LSN, this means that the initial dquot buffer can be replayed over the (newer) contents that were delwritten at the end of quotacheck. In effect, this re-initializes the dquot counters after they've been updated. If the log does not contain any other dquot items to recover, the obsolete dquot contents will not be corrected by log recovery. Because quotacheck uses a transaction to log the setting of the CHKD flags in the superblock, we skip quotacheck during the second mount call, which allows the incorrect icount to remain. Fix this by changing the ondisk dquot initialization function to use ordered buffers to write out fresh dquot blocks if it detects that we're running quotacheck. If the system goes down before quotacheck can complete, the CHKD flags will not be set in the superblock and the next mount will run quotacheck again, which can fix uninitialized dquot buffers. This requires amending the defer code to maintaine ordered buffer state across defer rolls for the sake of the dquot allocation code. For regular operations we preserve the current behavior since the dquot items require properly initialized ondisk dquot records. Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de>
2020-05-14 06:33:27 +08:00
list_for_each_entry(lip, &tp->t_items, li_trans) {
switch (lip->li_type) {
case XFS_LI_BUF:
bli = container_of(lip, struct xfs_buf_log_item,
bli_item);
if (bli->bli_flags & XFS_BLI_HOLD) {
if (dres->dr_bufs >= XFS_DEFER_OPS_NR_BUFS) {
ASSERT(0);
return -EFSCORRUPTED;
}
xfs: use ordered buffers to initialize dquot buffers during quotacheck While QAing the new xfs_repair quotacheck code, I uncovered a quota corruption bug resulting from a bad interaction between dquot buffer initialization and quotacheck. The bug can be reproduced with the following sequence: # mkfs.xfs -f /dev/sdf # mount /dev/sdf /opt -o usrquota # su nobody -s /bin/bash -c 'touch /opt/barf' # sync # xfs_quota -x -c 'report -ahi' /opt User quota on /opt (/dev/sdf) Inodes User ID Used Soft Hard Warn/Grace ---------- --------------------------------- root 3 0 0 00 [------] nobody 1 0 0 00 [------] # xfs_io -x -c 'shutdown' /opt # umount /opt # mount /dev/sdf /opt -o usrquota # touch /opt/man2 # xfs_quota -x -c 'report -ahi' /opt User quota on /opt (/dev/sdf) Inodes User ID Used Soft Hard Warn/Grace ---------- --------------------------------- root 1 0 0 00 [------] nobody 1 0 0 00 [------] # umount /opt Notice how the initial quotacheck set the root dquot icount to 3 (rootino, rbmino, rsumino), but after shutdown -> remount -> recovery, xfs_quota reports that the root dquot has only 1 icount. We haven't deleted anything from the filesystem, which means that quota is now under-counting. This behavior is not limited to icount or the root dquot, but this is the shortest reproducer. I traced the cause of this discrepancy to the way that we handle ondisk dquot updates during quotacheck vs. regular fs activity. Normally, when we allocate a disk block for a dquot, we log the buffer as a regular (dquot) buffer. Subsequent updates to the dquots backed by that block are done via separate dquot log item updates, which means that they depend on the logged buffer update being written to disk before the dquot items. Because individual dquots have their own LSN fields, that initial dquot buffer must always be recovered. However, the story changes for quotacheck, which can cause dquot block allocations but persists the final dquot counter values via a delwri list. Because recovery doesn't gate dquot buffer replay on an LSN, this means that the initial dquot buffer can be replayed over the (newer) contents that were delwritten at the end of quotacheck. In effect, this re-initializes the dquot counters after they've been updated. If the log does not contain any other dquot items to recover, the obsolete dquot contents will not be corrected by log recovery. Because quotacheck uses a transaction to log the setting of the CHKD flags in the superblock, we skip quotacheck during the second mount call, which allows the incorrect icount to remain. Fix this by changing the ondisk dquot initialization function to use ordered buffers to write out fresh dquot blocks if it detects that we're running quotacheck. If the system goes down before quotacheck can complete, the CHKD flags will not be set in the superblock and the next mount will run quotacheck again, which can fix uninitialized dquot buffers. This requires amending the defer code to maintaine ordered buffer state across defer rolls for the sake of the dquot allocation code. For regular operations we preserve the current behavior since the dquot items require properly initialized ondisk dquot records. Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de>
2020-05-14 06:33:27 +08:00
if (bli->bli_flags & XFS_BLI_ORDERED)
dres->dr_ordered |=
(1U << dres->dr_bufs);
xfs: use ordered buffers to initialize dquot buffers during quotacheck While QAing the new xfs_repair quotacheck code, I uncovered a quota corruption bug resulting from a bad interaction between dquot buffer initialization and quotacheck. The bug can be reproduced with the following sequence: # mkfs.xfs -f /dev/sdf # mount /dev/sdf /opt -o usrquota # su nobody -s /bin/bash -c 'touch /opt/barf' # sync # xfs_quota -x -c 'report -ahi' /opt User quota on /opt (/dev/sdf) Inodes User ID Used Soft Hard Warn/Grace ---------- --------------------------------- root 3 0 0 00 [------] nobody 1 0 0 00 [------] # xfs_io -x -c 'shutdown' /opt # umount /opt # mount /dev/sdf /opt -o usrquota # touch /opt/man2 # xfs_quota -x -c 'report -ahi' /opt User quota on /opt (/dev/sdf) Inodes User ID Used Soft Hard Warn/Grace ---------- --------------------------------- root 1 0 0 00 [------] nobody 1 0 0 00 [------] # umount /opt Notice how the initial quotacheck set the root dquot icount to 3 (rootino, rbmino, rsumino), but after shutdown -> remount -> recovery, xfs_quota reports that the root dquot has only 1 icount. We haven't deleted anything from the filesystem, which means that quota is now under-counting. This behavior is not limited to icount or the root dquot, but this is the shortest reproducer. I traced the cause of this discrepancy to the way that we handle ondisk dquot updates during quotacheck vs. regular fs activity. Normally, when we allocate a disk block for a dquot, we log the buffer as a regular (dquot) buffer. Subsequent updates to the dquots backed by that block are done via separate dquot log item updates, which means that they depend on the logged buffer update being written to disk before the dquot items. Because individual dquots have their own LSN fields, that initial dquot buffer must always be recovered. However, the story changes for quotacheck, which can cause dquot block allocations but persists the final dquot counter values via a delwri list. Because recovery doesn't gate dquot buffer replay on an LSN, this means that the initial dquot buffer can be replayed over the (newer) contents that were delwritten at the end of quotacheck. In effect, this re-initializes the dquot counters after they've been updated. If the log does not contain any other dquot items to recover, the obsolete dquot contents will not be corrected by log recovery. Because quotacheck uses a transaction to log the setting of the CHKD flags in the superblock, we skip quotacheck during the second mount call, which allows the incorrect icount to remain. Fix this by changing the ondisk dquot initialization function to use ordered buffers to write out fresh dquot blocks if it detects that we're running quotacheck. If the system goes down before quotacheck can complete, the CHKD flags will not be set in the superblock and the next mount will run quotacheck again, which can fix uninitialized dquot buffers. This requires amending the defer code to maintaine ordered buffer state across defer rolls for the sake of the dquot allocation code. For regular operations we preserve the current behavior since the dquot items require properly initialized ondisk dquot records. Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de>
2020-05-14 06:33:27 +08:00
else
xfs_trans_dirty_buf(tp, bli->bli_buf);
dres->dr_bp[dres->dr_bufs++] = bli->bli_buf;
}
break;
case XFS_LI_INODE:
ili = container_of(lip, struct xfs_inode_log_item,
ili_item);
if (ili->ili_lock_flags == 0) {
if (dres->dr_inos >= XFS_DEFER_OPS_NR_INODES) {
ASSERT(0);
return -EFSCORRUPTED;
}
xfs_trans_log_inode(tp, ili->ili_inode,
XFS_ILOG_CORE);
dres->dr_ip[dres->dr_inos++] = ili->ili_inode;
}
break;
default:
break;
}
}
return 0;
}
/* Attach the held resources to the transaction. */
static void
xfs_defer_restore_resources(
struct xfs_trans *tp,
struct xfs_defer_resources *dres)
{
unsigned short i;
/* Rejoin the joined inodes. */
for (i = 0; i < dres->dr_inos; i++)
xfs_trans_ijoin(tp, dres->dr_ip[i], 0);
/* Rejoin the buffers and dirty them so the log moves forward. */
for (i = 0; i < dres->dr_bufs; i++) {
xfs_trans_bjoin(tp, dres->dr_bp[i]);
if (dres->dr_ordered & (1U << i))
xfs_trans_ordered_buf(tp, dres->dr_bp[i]);
xfs_trans_bhold(tp, dres->dr_bp[i]);
}
}
/* Roll a transaction so we can do some deferred op processing. */
STATIC int
xfs_defer_trans_roll(
struct xfs_trans **tpp)
{
struct xfs_defer_resources dres = { };
int error;
error = xfs_defer_save_resources(&dres, *tpp);
if (error)
return error;
trace_xfs_defer_trans_roll(*tpp, _RET_IP_);
/*
* Roll the transaction. Rolling always given a new transaction (even
* if committing the old one fails!) to hand back to the caller, so we
* join the held resources to the new transaction so that we always
* return with the held resources joined to @tpp, no matter what
* happened.
*/
error = xfs_trans_roll(tpp);
xfs_defer_restore_resources(*tpp, &dres);
if (error)
trace_xfs_defer_trans_roll_error(*tpp, error);
return error;
}
/*
* Free up any items left in the list.
*/
static void
xfs_defer_cancel_list(
struct xfs_mount *mp,
struct list_head *dop_list)
{
struct xfs_defer_pending *dfp;
struct xfs_defer_pending *pli;
struct list_head *pwi;
struct list_head *n;
const struct xfs_defer_op_type *ops;
/*
* Free the pending items. Caller should already have arranged
* for the intent items to be released.
*/
list_for_each_entry_safe(dfp, pli, dop_list, dfp_list) {
ops = defer_op_types[dfp->dfp_type];
trace_xfs_defer_cancel_list(mp, dfp);
list_del(&dfp->dfp_list);
list_for_each_safe(pwi, n, &dfp->dfp_work) {
list_del(pwi);
dfp->dfp_count--;
xfs: allow queued AG intents to drain before scrubbing When a writer thread executes a chain of log intent items, the AG header buffer locks will cycle during a transaction roll to get from one intent item to the next in a chain. Although scrub takes all AG header buffer locks, this isn't sufficient to guard against scrub checking an AG while that writer thread is in the middle of finishing a chain because there's no higher level locking primitive guarding allocation groups. When there's a collision, cross-referencing between data structures (e.g. rmapbt and refcountbt) yields false corruption events; if repair is running, this results in incorrect repairs, which is catastrophic. Fix this by adding to the perag structure the count of active intents and make scrub wait until it has both AG header buffer locks and the intent counter reaches zero. One quirk of the drain code is that deferred bmap updates also bump and drop the intent counter. A fundamental decision made during the design phase of the reverse mapping feature is that updates to the rmapbt records are always made by the same code that updates the primary metadata. In other words, callers of bmapi functions expect that the bmapi functions will queue deferred rmap updates. Some parts of the reflink code queue deferred refcount (CUI) and bmap (BUI) updates in the same head transaction, but the deferred work manager completely finishes the CUI before the BUI work is started. As a result, the CUI drops the intent count long before the deferred rmap (RUI) update even has a chance to bump the intent count. The only way to keep the intent count elevated between the CUI and RUI is for the BUI to bump the counter until the RUI has been created. A second quirk of the intent drain code is that deferred work items must increment the intent counter as soon as the work item is added to the transaction. When a BUI completes and queues an RUI, the RUI must increment the counter before the BUI decrements it. The only way to accomplish this is to require that the counter be bumped as soon as the deferred work item is created in memory. In the next patches we'll improve on this facility, but this patch provides the basic functionality. Signed-off-by: Darrick J. Wong <djwong@kernel.org> Reviewed-by: Dave Chinner <dchinner@redhat.com>
2023-04-12 09:59:58 +08:00
trace_xfs_defer_cancel_item(mp, dfp, pwi);
ops->cancel_item(pwi);
}
ASSERT(dfp->dfp_count == 0);
kmem_cache_free(xfs_defer_pending_cache, dfp);
}
}
xfs: periodically relog deferred intent items There's a subtle design flaw in the deferred log item code that can lead to pinning the log tail. Taking up the defer ops chain examples from the previous commit, we can get trapped in sequences like this: Caller hands us a transaction t0 with D0-D3 attached. The defer ops chain will look like the following if the transaction rolls succeed: t1: D0(t0), D1(t0), D2(t0), D3(t0) t2: d4(t1), d5(t1), D1(t0), D2(t0), D3(t0) t3: d5(t1), D1(t0), D2(t0), D3(t0) ... t9: d9(t7), D3(t0) t10: D3(t0) t11: d10(t10), d11(t10) t12: d11(t10) In transaction 9, we finish d9 and try to roll to t10 while holding onto an intent item for D3 that we logged in t0. The previous commit changed the order in which we place new defer ops in the defer ops processing chain to reduce the maximum chain length. Now make xfs_defer_finish_noroll capable of relogging the entire chain periodically so that we can always move the log tail forward. Most chains will never get relogged, except for operations that generate very long chains (large extents containing many blocks with different sharing levels) or are on filesystems with small logs and a lot of ongoing metadata updates. Callers are now required to ensure that the transaction reservation is large enough to handle logging done items and new intent items for the maximum possible chain length. Most callers are careful to keep the chain lengths low, so the overhead should be minimal. The decision to relog an intent item is made based on whether the intent was logged in a previous checkpoint, since there's no point in relogging an intent into the same checkpoint. Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Brian Foster <bfoster@redhat.com>
2020-09-28 07:18:13 +08:00
/*
* Prevent a log intent item from pinning the tail of the log by logging a
* done item to release the intent item; and then log a new intent item.
* The caller should provide a fresh transaction and roll it after we're done.
*/
static int
xfs_defer_relog(
struct xfs_trans **tpp,
struct list_head *dfops)
{
struct xlog *log = (*tpp)->t_mountp->m_log;
xfs: periodically relog deferred intent items There's a subtle design flaw in the deferred log item code that can lead to pinning the log tail. Taking up the defer ops chain examples from the previous commit, we can get trapped in sequences like this: Caller hands us a transaction t0 with D0-D3 attached. The defer ops chain will look like the following if the transaction rolls succeed: t1: D0(t0), D1(t0), D2(t0), D3(t0) t2: d4(t1), d5(t1), D1(t0), D2(t0), D3(t0) t3: d5(t1), D1(t0), D2(t0), D3(t0) ... t9: d9(t7), D3(t0) t10: D3(t0) t11: d10(t10), d11(t10) t12: d11(t10) In transaction 9, we finish d9 and try to roll to t10 while holding onto an intent item for D3 that we logged in t0. The previous commit changed the order in which we place new defer ops in the defer ops processing chain to reduce the maximum chain length. Now make xfs_defer_finish_noroll capable of relogging the entire chain periodically so that we can always move the log tail forward. Most chains will never get relogged, except for operations that generate very long chains (large extents containing many blocks with different sharing levels) or are on filesystems with small logs and a lot of ongoing metadata updates. Callers are now required to ensure that the transaction reservation is large enough to handle logging done items and new intent items for the maximum possible chain length. Most callers are careful to keep the chain lengths low, so the overhead should be minimal. The decision to relog an intent item is made based on whether the intent was logged in a previous checkpoint, since there's no point in relogging an intent into the same checkpoint. Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Brian Foster <bfoster@redhat.com>
2020-09-28 07:18:13 +08:00
struct xfs_defer_pending *dfp;
xfs_lsn_t threshold_lsn = NULLCOMMITLSN;
xfs: periodically relog deferred intent items There's a subtle design flaw in the deferred log item code that can lead to pinning the log tail. Taking up the defer ops chain examples from the previous commit, we can get trapped in sequences like this: Caller hands us a transaction t0 with D0-D3 attached. The defer ops chain will look like the following if the transaction rolls succeed: t1: D0(t0), D1(t0), D2(t0), D3(t0) t2: d4(t1), d5(t1), D1(t0), D2(t0), D3(t0) t3: d5(t1), D1(t0), D2(t0), D3(t0) ... t9: d9(t7), D3(t0) t10: D3(t0) t11: d10(t10), d11(t10) t12: d11(t10) In transaction 9, we finish d9 and try to roll to t10 while holding onto an intent item for D3 that we logged in t0. The previous commit changed the order in which we place new defer ops in the defer ops processing chain to reduce the maximum chain length. Now make xfs_defer_finish_noroll capable of relogging the entire chain periodically so that we can always move the log tail forward. Most chains will never get relogged, except for operations that generate very long chains (large extents containing many blocks with different sharing levels) or are on filesystems with small logs and a lot of ongoing metadata updates. Callers are now required to ensure that the transaction reservation is large enough to handle logging done items and new intent items for the maximum possible chain length. Most callers are careful to keep the chain lengths low, so the overhead should be minimal. The decision to relog an intent item is made based on whether the intent was logged in a previous checkpoint, since there's no point in relogging an intent into the same checkpoint. Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Brian Foster <bfoster@redhat.com>
2020-09-28 07:18:13 +08:00
ASSERT((*tpp)->t_flags & XFS_TRANS_PERM_LOG_RES);
list_for_each_entry(dfp, dfops, dfp_list) {
/*
* If the log intent item for this deferred op is not a part of
* the current log checkpoint, relog the intent item to keep
* the log tail moving forward. We're ok with this being racy
* because an incorrect decision means we'll be a little slower
* at pushing the tail.
*/
if (dfp->dfp_intent == NULL ||
xfs_log_item_in_current_chkpt(dfp->dfp_intent))
continue;
/*
* Figure out where we need the tail to be in order to maintain
* the minimum required free space in the log. Only sample
* the log threshold once per call.
*/
if (threshold_lsn == NULLCOMMITLSN) {
threshold_lsn = xlog_grant_push_threshold(log, 0);
if (threshold_lsn == NULLCOMMITLSN)
break;
}
if (XFS_LSN_CMP(dfp->dfp_intent->li_lsn, threshold_lsn) >= 0)
continue;
xfs: periodically relog deferred intent items There's a subtle design flaw in the deferred log item code that can lead to pinning the log tail. Taking up the defer ops chain examples from the previous commit, we can get trapped in sequences like this: Caller hands us a transaction t0 with D0-D3 attached. The defer ops chain will look like the following if the transaction rolls succeed: t1: D0(t0), D1(t0), D2(t0), D3(t0) t2: d4(t1), d5(t1), D1(t0), D2(t0), D3(t0) t3: d5(t1), D1(t0), D2(t0), D3(t0) ... t9: d9(t7), D3(t0) t10: D3(t0) t11: d10(t10), d11(t10) t12: d11(t10) In transaction 9, we finish d9 and try to roll to t10 while holding onto an intent item for D3 that we logged in t0. The previous commit changed the order in which we place new defer ops in the defer ops processing chain to reduce the maximum chain length. Now make xfs_defer_finish_noroll capable of relogging the entire chain periodically so that we can always move the log tail forward. Most chains will never get relogged, except for operations that generate very long chains (large extents containing many blocks with different sharing levels) or are on filesystems with small logs and a lot of ongoing metadata updates. Callers are now required to ensure that the transaction reservation is large enough to handle logging done items and new intent items for the maximum possible chain length. Most callers are careful to keep the chain lengths low, so the overhead should be minimal. The decision to relog an intent item is made based on whether the intent was logged in a previous checkpoint, since there's no point in relogging an intent into the same checkpoint. Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Brian Foster <bfoster@redhat.com>
2020-09-28 07:18:13 +08:00
trace_xfs_defer_relog_intent((*tpp)->t_mountp, dfp);
XFS_STATS_INC((*tpp)->t_mountp, defer_relog);
dfp->dfp_intent = xfs_trans_item_relog(dfp->dfp_intent, *tpp);
}
if ((*tpp)->t_flags & XFS_TRANS_DIRTY)
return xfs_defer_trans_roll(tpp);
return 0;
}
/*
* Log an intent-done item for the first pending intent, and finish the work
* items.
*/
static int
xfs_defer_finish_one(
struct xfs_trans *tp,
struct xfs_defer_pending *dfp)
{
const struct xfs_defer_op_type *ops = defer_op_types[dfp->dfp_type];
struct xfs_btree_cur *state = NULL;
struct list_head *li, *n;
int error;
trace_xfs_defer_pending_finish(tp->t_mountp, dfp);
dfp->dfp_done = ops->create_done(tp, dfp->dfp_intent, dfp->dfp_count);
list_for_each_safe(li, n, &dfp->dfp_work) {
list_del(li);
dfp->dfp_count--;
xfs: allow queued AG intents to drain before scrubbing When a writer thread executes a chain of log intent items, the AG header buffer locks will cycle during a transaction roll to get from one intent item to the next in a chain. Although scrub takes all AG header buffer locks, this isn't sufficient to guard against scrub checking an AG while that writer thread is in the middle of finishing a chain because there's no higher level locking primitive guarding allocation groups. When there's a collision, cross-referencing between data structures (e.g. rmapbt and refcountbt) yields false corruption events; if repair is running, this results in incorrect repairs, which is catastrophic. Fix this by adding to the perag structure the count of active intents and make scrub wait until it has both AG header buffer locks and the intent counter reaches zero. One quirk of the drain code is that deferred bmap updates also bump and drop the intent counter. A fundamental decision made during the design phase of the reverse mapping feature is that updates to the rmapbt records are always made by the same code that updates the primary metadata. In other words, callers of bmapi functions expect that the bmapi functions will queue deferred rmap updates. Some parts of the reflink code queue deferred refcount (CUI) and bmap (BUI) updates in the same head transaction, but the deferred work manager completely finishes the CUI before the BUI work is started. As a result, the CUI drops the intent count long before the deferred rmap (RUI) update even has a chance to bump the intent count. The only way to keep the intent count elevated between the CUI and RUI is for the BUI to bump the counter until the RUI has been created. A second quirk of the intent drain code is that deferred work items must increment the intent counter as soon as the work item is added to the transaction. When a BUI completes and queues an RUI, the RUI must increment the counter before the BUI decrements it. The only way to accomplish this is to require that the counter be bumped as soon as the deferred work item is created in memory. In the next patches we'll improve on this facility, but this patch provides the basic functionality. Signed-off-by: Darrick J. Wong <djwong@kernel.org> Reviewed-by: Dave Chinner <dchinner@redhat.com>
2023-04-12 09:59:58 +08:00
trace_xfs_defer_finish_item(tp->t_mountp, dfp, li);
error = ops->finish_item(tp, dfp->dfp_done, li, &state);
if (error == -EAGAIN) {
xfs: share xattr name and value buffers when logging xattr updates While running xfs/297 and generic/642, I noticed a crash in xfs_attri_item_relog when it tries to copy the attr name to the new xattri log item. I think what happened here was that we called ->iop_commit on the old attri item (which nulls out the pointers) as part of a log force at the same time that a chained attr operation was ongoing. The system was busy enough that at some later point, the defer ops operation decided it was necessary to relog the attri log item, but as we've detached the name buffer from the old attri log item, we can't copy it to the new one, and kaboom. I think there's a broader refcounting problem with LARP mode -- the setxattr code can return to userspace before the CIL actually formats and commits the log item, which results in a UAF bug. Therefore, the xattr log item needs to be able to retain a reference to the name and value buffers until the log items have completely cleared the log. Furthermore, each time we create an intent log item, we allocate new memory and (re)copy the contents; sharing here would be very useful. Solve the UAF and the unnecessary memory allocations by having the log code create a single refcounted buffer to contain the name and value contents. This buffer can be passed from old to new during a relog operation, and the logging code can (optionally) attach it to the xfs_attr_item for reuse when LARP mode is enabled. This also fixes a problem where the xfs_attri_log_item objects weren't being freed back to the same cache where they came from. Signed-off-by: Darrick J. Wong <djwong@kernel.org> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2022-05-23 06:43:46 +08:00
int ret;
/*
* Caller wants a fresh transaction; put the work item
* back on the list and log a new log intent item to
* replace the old one. See "Requesting a Fresh
* Transaction while Finishing Deferred Work" above.
*/
list_add(li, &dfp->dfp_work);
dfp->dfp_count++;
dfp->dfp_done = NULL;
dfp->dfp_intent = NULL;
xfs: share xattr name and value buffers when logging xattr updates While running xfs/297 and generic/642, I noticed a crash in xfs_attri_item_relog when it tries to copy the attr name to the new xattri log item. I think what happened here was that we called ->iop_commit on the old attri item (which nulls out the pointers) as part of a log force at the same time that a chained attr operation was ongoing. The system was busy enough that at some later point, the defer ops operation decided it was necessary to relog the attri log item, but as we've detached the name buffer from the old attri log item, we can't copy it to the new one, and kaboom. I think there's a broader refcounting problem with LARP mode -- the setxattr code can return to userspace before the CIL actually formats and commits the log item, which results in a UAF bug. Therefore, the xattr log item needs to be able to retain a reference to the name and value buffers until the log items have completely cleared the log. Furthermore, each time we create an intent log item, we allocate new memory and (re)copy the contents; sharing here would be very useful. Solve the UAF and the unnecessary memory allocations by having the log code create a single refcounted buffer to contain the name and value contents. This buffer can be passed from old to new during a relog operation, and the logging code can (optionally) attach it to the xfs_attr_item for reuse when LARP mode is enabled. This also fixes a problem where the xfs_attri_log_item objects weren't being freed back to the same cache where they came from. Signed-off-by: Darrick J. Wong <djwong@kernel.org> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2022-05-23 06:43:46 +08:00
ret = xfs_defer_create_intent(tp, dfp, false);
if (ret < 0)
error = ret;
}
if (error)
goto out;
}
/* Done with the dfp, free it. */
list_del(&dfp->dfp_list);
kmem_cache_free(xfs_defer_pending_cache, dfp);
out:
if (ops->finish_cleanup)
ops->finish_cleanup(tp, state, error);
return error;
}
/*
* Finish all the pending work. This involves logging intent items for
* any work items that wandered in since the last transaction roll (if
* one has even happened), rolling the transaction, and finishing the
* work items in the first item on the logged-and-pending list.
*
* If an inode is provided, relog it to the new transaction.
*/
int
xfs_defer_finish_noroll(
struct xfs_trans **tp)
{
struct xfs_defer_pending *dfp = NULL;
int error = 0;
LIST_HEAD(dop_pending);
ASSERT((*tp)->t_flags & XFS_TRANS_PERM_LOG_RES);
trace_xfs_defer_finish(*tp, _RET_IP_);
/* Until we run out of pending work to finish... */
while (!list_empty(&dop_pending) || !list_empty(&(*tp)->t_dfops)) {
xfs: change the order in which child and parent defer ops are finished The defer ops code has been finishing items in the wrong order -- if a top level defer op creates items A and B, and finishing item A creates more defer ops A1 and A2, we'll put the new items on the end of the chain and process them in the order A B A1 A2. This is kind of weird, since it's convenient for programmers to be able to think of A and B as an ordered sequence where all the sub-tasks for A must finish before we move on to B, e.g. A A1 A2 D. Right now, our log intent items are not so complex that this matters, but this will become important for the atomic extent swapping patchset. In order to maintain correct reference counting of extents, we have to unmap and remap extents in that order, and we want to complete that work before moving on to the next range that the user wants to swap. This patch fixes defer ops to satsify that requirement. The primary symptom of the incorrect order was noticed in an early performance analysis of the atomic extent swap code. An astonishingly large number of deferred work items accumulated when userspace requested an atomic update of two very fragmented files. The cause of this was traced to the same ordering bug in the inner loop of xfs_defer_finish_noroll. If the ->finish_item method of a deferred operation queues new deferred operations, those new deferred ops are appended to the tail of the pending work list. To illustrate, say that a caller creates a transaction t0 with four deferred operations D0-D3. The first thing defer ops does is roll the transaction to t1, leaving us with: t1: D0(t0), D1(t0), D2(t0), D3(t0) Let's say that finishing each of D0-D3 will create two new deferred ops. After finish D0 and roll, we'll have the following chain: t2: D1(t0), D2(t0), D3(t0), d4(t1), d5(t1) d4 and d5 were logged to t1. Notice that while we're about to start work on D1, we haven't actually completed all the work implied by D0 being finished. So far we've been careful (or lucky) to structure the dfops callers such that D1 doesn't depend on d4 or d5 being finished, but this is a potential logic bomb. There's a second problem lurking. Let's see what happens as we finish D1-D3: t3: D2(t0), D3(t0), d4(t1), d5(t1), d6(t2), d7(t2) t4: D3(t0), d4(t1), d5(t1), d6(t2), d7(t2), d8(t3), d9(t3) t5: d4(t1), d5(t1), d6(t2), d7(t2), d8(t3), d9(t3), d10(t4), d11(t4) Let's say that d4-d11 are simple work items that don't queue any other operations, which means that we can complete each d4 and roll to t6: t6: d5(t1), d6(t2), d7(t2), d8(t3), d9(t3), d10(t4), d11(t4) t7: d6(t2), d7(t2), d8(t3), d9(t3), d10(t4), d11(t4) ... t11: d10(t4), d11(t4) t12: d11(t4) <done> When we try to roll to transaction #12, we're holding defer op d11, which we logged way back in t4. This means that the tail of the log is pinned at t4. If the log is very small or there are a lot of other threads updating metadata, this means that we might have wrapped the log and cannot get roll to t11 because there isn't enough space left before we'd run into t4. Let's shift back to the original failure. I mentioned before that I discovered this flaw while developing the atomic file update code. In that scenario, we have a defer op (D0) that finds a range of file blocks to remap, creates a handful of new defer ops to do that, and then asks to be continued with however much work remains. So, D0 is the original swapext deferred op. The first thing defer ops does is rolls to t1: t1: D0(t0) We try to finish D0, logging d1 and d2 in the process, but can't get all the work done. We log a done item and a new intent item for the work that D0 still has to do, and roll to t2: t2: D0'(t1), d1(t1), d2(t1) We roll and try to finish D0', but still can't get all the work done, so we log a done item and a new intent item for it, requeue D0 a second time, and roll to t3: t3: D0''(t2), d1(t1), d2(t1), d3(t2), d4(t2) If it takes 48 more rolls to complete D0, then we'll finally dispense with D0 in t50: t50: D<fifty primes>(t49), d1(t1), ..., d102(t50) We then try to roll again to get a chain like this: t51: d1(t1), d2(t1), ..., d101(t50), d102(t50) ... t152: d102(t50) <done> Notice that in rolling to transaction #51, we're holding on to a log intent item for d1 that was logged in transaction #1. This means that the tail of the log is pinned at t1. If the log is very small or there are a lot of other threads updating metadata, this means that we might have wrapped the log and cannot roll to t51 because there isn't enough space left before we'd run into t1. This is of course problem #2 again. But notice the third problem with this scenario: we have 102 defer ops tied to this transaction! Each of these items are backed by pinned kernel memory, which means that we risk OOM if the chains get too long. Yikes. Problem #1 is a subtle logic bomb that could hit someone in the future; problem #2 applies (rarely) to the current upstream, and problem #3 applies to work under development. This is not how incremental deferred operations were supposed to work. The dfops design of logging in the same transaction an intent-done item and a new intent item for the work remaining was to make it so that we only have to juggle enough deferred work items to finish that one small piece of work. Deferred log item recovery will find that first unfinished work item and restart it, no matter how many other intent items might follow it in the log. Therefore, it's ok to put the new intents at the start of the dfops chain. For the first example, the chains look like this: t2: d4(t1), d5(t1), D1(t0), D2(t0), D3(t0) t3: d5(t1), D1(t0), D2(t0), D3(t0) ... t9: d9(t7), D3(t0) t10: D3(t0) t11: d10(t10), d11(t10) t12: d11(t10) For the second example, the chains look like this: t1: D0(t0) t2: d1(t1), d2(t1), D0'(t1) t3: d2(t1), D0'(t1) t4: D0'(t1) t5: d1(t4), d2(t4), D0''(t4) ... t148: D0<50 primes>(t147) t149: d101(t148), d102(t148) t150: d102(t148) <done> This actually sucks more for pinning the log tail (we try to roll to t10 while holding an intent item that was logged in t1) but we've solved problem #1. We've also reduced the maximum chain length from: sum(all the new items) + nr_original_items to: max(new items that each original item creates) + nr_original_items This solves problem #3 by sharply reducing the number of defer ops that can be attached to a transaction at any given time. The change makes the problem of log tail pinning worse, but is improvement we need to solve problem #2. Actually solving #2, however, is left to the next patch. Note that a subsequent analysis of some hard-to-trigger reflink and COW livelocks on extremely fragmented filesystems (or systems running a lot of IO threads) showed the same symptoms -- uncomfortably large numbers of incore deferred work items and occasional stalls in the transaction grant code while waiting for log reservations. I think this patch and the next one will also solve these problems. As originally written, the code used list_splice_tail_init instead of list_splice_init, so change that, and leave a short comment explaining our actions. Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Brian Foster <bfoster@redhat.com>
2020-09-26 08:39:51 +08:00
/*
* Deferred items that are created in the process of finishing
* other deferred work items should be queued at the head of
* the pending list, which puts them ahead of the deferred work
* that was created by the caller. This keeps the number of
* pending work items to a minimum, which decreases the amount
* of time that any one intent item can stick around in memory,
* pinning the log tail.
*/
xfs: share xattr name and value buffers when logging xattr updates While running xfs/297 and generic/642, I noticed a crash in xfs_attri_item_relog when it tries to copy the attr name to the new xattri log item. I think what happened here was that we called ->iop_commit on the old attri item (which nulls out the pointers) as part of a log force at the same time that a chained attr operation was ongoing. The system was busy enough that at some later point, the defer ops operation decided it was necessary to relog the attri log item, but as we've detached the name buffer from the old attri log item, we can't copy it to the new one, and kaboom. I think there's a broader refcounting problem with LARP mode -- the setxattr code can return to userspace before the CIL actually formats and commits the log item, which results in a UAF bug. Therefore, the xattr log item needs to be able to retain a reference to the name and value buffers until the log items have completely cleared the log. Furthermore, each time we create an intent log item, we allocate new memory and (re)copy the contents; sharing here would be very useful. Solve the UAF and the unnecessary memory allocations by having the log code create a single refcounted buffer to contain the name and value contents. This buffer can be passed from old to new during a relog operation, and the logging code can (optionally) attach it to the xfs_attr_item for reuse when LARP mode is enabled. This also fixes a problem where the xfs_attri_log_item objects weren't being freed back to the same cache where they came from. Signed-off-by: Darrick J. Wong <djwong@kernel.org> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2022-05-23 06:43:46 +08:00
int has_intents = xfs_defer_create_intents(*tp);
xfs: change the order in which child and parent defer ops are finished The defer ops code has been finishing items in the wrong order -- if a top level defer op creates items A and B, and finishing item A creates more defer ops A1 and A2, we'll put the new items on the end of the chain and process them in the order A B A1 A2. This is kind of weird, since it's convenient for programmers to be able to think of A and B as an ordered sequence where all the sub-tasks for A must finish before we move on to B, e.g. A A1 A2 D. Right now, our log intent items are not so complex that this matters, but this will become important for the atomic extent swapping patchset. In order to maintain correct reference counting of extents, we have to unmap and remap extents in that order, and we want to complete that work before moving on to the next range that the user wants to swap. This patch fixes defer ops to satsify that requirement. The primary symptom of the incorrect order was noticed in an early performance analysis of the atomic extent swap code. An astonishingly large number of deferred work items accumulated when userspace requested an atomic update of two very fragmented files. The cause of this was traced to the same ordering bug in the inner loop of xfs_defer_finish_noroll. If the ->finish_item method of a deferred operation queues new deferred operations, those new deferred ops are appended to the tail of the pending work list. To illustrate, say that a caller creates a transaction t0 with four deferred operations D0-D3. The first thing defer ops does is roll the transaction to t1, leaving us with: t1: D0(t0), D1(t0), D2(t0), D3(t0) Let's say that finishing each of D0-D3 will create two new deferred ops. After finish D0 and roll, we'll have the following chain: t2: D1(t0), D2(t0), D3(t0), d4(t1), d5(t1) d4 and d5 were logged to t1. Notice that while we're about to start work on D1, we haven't actually completed all the work implied by D0 being finished. So far we've been careful (or lucky) to structure the dfops callers such that D1 doesn't depend on d4 or d5 being finished, but this is a potential logic bomb. There's a second problem lurking. Let's see what happens as we finish D1-D3: t3: D2(t0), D3(t0), d4(t1), d5(t1), d6(t2), d7(t2) t4: D3(t0), d4(t1), d5(t1), d6(t2), d7(t2), d8(t3), d9(t3) t5: d4(t1), d5(t1), d6(t2), d7(t2), d8(t3), d9(t3), d10(t4), d11(t4) Let's say that d4-d11 are simple work items that don't queue any other operations, which means that we can complete each d4 and roll to t6: t6: d5(t1), d6(t2), d7(t2), d8(t3), d9(t3), d10(t4), d11(t4) t7: d6(t2), d7(t2), d8(t3), d9(t3), d10(t4), d11(t4) ... t11: d10(t4), d11(t4) t12: d11(t4) <done> When we try to roll to transaction #12, we're holding defer op d11, which we logged way back in t4. This means that the tail of the log is pinned at t4. If the log is very small or there are a lot of other threads updating metadata, this means that we might have wrapped the log and cannot get roll to t11 because there isn't enough space left before we'd run into t4. Let's shift back to the original failure. I mentioned before that I discovered this flaw while developing the atomic file update code. In that scenario, we have a defer op (D0) that finds a range of file blocks to remap, creates a handful of new defer ops to do that, and then asks to be continued with however much work remains. So, D0 is the original swapext deferred op. The first thing defer ops does is rolls to t1: t1: D0(t0) We try to finish D0, logging d1 and d2 in the process, but can't get all the work done. We log a done item and a new intent item for the work that D0 still has to do, and roll to t2: t2: D0'(t1), d1(t1), d2(t1) We roll and try to finish D0', but still can't get all the work done, so we log a done item and a new intent item for it, requeue D0 a second time, and roll to t3: t3: D0''(t2), d1(t1), d2(t1), d3(t2), d4(t2) If it takes 48 more rolls to complete D0, then we'll finally dispense with D0 in t50: t50: D<fifty primes>(t49), d1(t1), ..., d102(t50) We then try to roll again to get a chain like this: t51: d1(t1), d2(t1), ..., d101(t50), d102(t50) ... t152: d102(t50) <done> Notice that in rolling to transaction #51, we're holding on to a log intent item for d1 that was logged in transaction #1. This means that the tail of the log is pinned at t1. If the log is very small or there are a lot of other threads updating metadata, this means that we might have wrapped the log and cannot roll to t51 because there isn't enough space left before we'd run into t1. This is of course problem #2 again. But notice the third problem with this scenario: we have 102 defer ops tied to this transaction! Each of these items are backed by pinned kernel memory, which means that we risk OOM if the chains get too long. Yikes. Problem #1 is a subtle logic bomb that could hit someone in the future; problem #2 applies (rarely) to the current upstream, and problem #3 applies to work under development. This is not how incremental deferred operations were supposed to work. The dfops design of logging in the same transaction an intent-done item and a new intent item for the work remaining was to make it so that we only have to juggle enough deferred work items to finish that one small piece of work. Deferred log item recovery will find that first unfinished work item and restart it, no matter how many other intent items might follow it in the log. Therefore, it's ok to put the new intents at the start of the dfops chain. For the first example, the chains look like this: t2: d4(t1), d5(t1), D1(t0), D2(t0), D3(t0) t3: d5(t1), D1(t0), D2(t0), D3(t0) ... t9: d9(t7), D3(t0) t10: D3(t0) t11: d10(t10), d11(t10) t12: d11(t10) For the second example, the chains look like this: t1: D0(t0) t2: d1(t1), d2(t1), D0'(t1) t3: d2(t1), D0'(t1) t4: D0'(t1) t5: d1(t4), d2(t4), D0''(t4) ... t148: D0<50 primes>(t147) t149: d101(t148), d102(t148) t150: d102(t148) <done> This actually sucks more for pinning the log tail (we try to roll to t10 while holding an intent item that was logged in t1) but we've solved problem #1. We've also reduced the maximum chain length from: sum(all the new items) + nr_original_items to: max(new items that each original item creates) + nr_original_items This solves problem #3 by sharply reducing the number of defer ops that can be attached to a transaction at any given time. The change makes the problem of log tail pinning worse, but is improvement we need to solve problem #2. Actually solving #2, however, is left to the next patch. Note that a subsequent analysis of some hard-to-trigger reflink and COW livelocks on extremely fragmented filesystems (or systems running a lot of IO threads) showed the same symptoms -- uncomfortably large numbers of incore deferred work items and occasional stalls in the transaction grant code while waiting for log reservations. I think this patch and the next one will also solve these problems. As originally written, the code used list_splice_tail_init instead of list_splice_init, so change that, and leave a short comment explaining our actions. Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Brian Foster <bfoster@redhat.com>
2020-09-26 08:39:51 +08:00
list_splice_init(&(*tp)->t_dfops, &dop_pending);
xfs: share xattr name and value buffers when logging xattr updates While running xfs/297 and generic/642, I noticed a crash in xfs_attri_item_relog when it tries to copy the attr name to the new xattri log item. I think what happened here was that we called ->iop_commit on the old attri item (which nulls out the pointers) as part of a log force at the same time that a chained attr operation was ongoing. The system was busy enough that at some later point, the defer ops operation decided it was necessary to relog the attri log item, but as we've detached the name buffer from the old attri log item, we can't copy it to the new one, and kaboom. I think there's a broader refcounting problem with LARP mode -- the setxattr code can return to userspace before the CIL actually formats and commits the log item, which results in a UAF bug. Therefore, the xattr log item needs to be able to retain a reference to the name and value buffers until the log items have completely cleared the log. Furthermore, each time we create an intent log item, we allocate new memory and (re)copy the contents; sharing here would be very useful. Solve the UAF and the unnecessary memory allocations by having the log code create a single refcounted buffer to contain the name and value contents. This buffer can be passed from old to new during a relog operation, and the logging code can (optionally) attach it to the xfs_attr_item for reuse when LARP mode is enabled. This also fixes a problem where the xfs_attri_log_item objects weren't being freed back to the same cache where they came from. Signed-off-by: Darrick J. Wong <djwong@kernel.org> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2022-05-23 06:43:46 +08:00
if (has_intents < 0) {
error = has_intents;
goto out_shutdown;
}
if (has_intents || dfp) {
error = xfs_defer_trans_roll(tp);
if (error)
goto out_shutdown;
xfs: periodically relog deferred intent items There's a subtle design flaw in the deferred log item code that can lead to pinning the log tail. Taking up the defer ops chain examples from the previous commit, we can get trapped in sequences like this: Caller hands us a transaction t0 with D0-D3 attached. The defer ops chain will look like the following if the transaction rolls succeed: t1: D0(t0), D1(t0), D2(t0), D3(t0) t2: d4(t1), d5(t1), D1(t0), D2(t0), D3(t0) t3: d5(t1), D1(t0), D2(t0), D3(t0) ... t9: d9(t7), D3(t0) t10: D3(t0) t11: d10(t10), d11(t10) t12: d11(t10) In transaction 9, we finish d9 and try to roll to t10 while holding onto an intent item for D3 that we logged in t0. The previous commit changed the order in which we place new defer ops in the defer ops processing chain to reduce the maximum chain length. Now make xfs_defer_finish_noroll capable of relogging the entire chain periodically so that we can always move the log tail forward. Most chains will never get relogged, except for operations that generate very long chains (large extents containing many blocks with different sharing levels) or are on filesystems with small logs and a lot of ongoing metadata updates. Callers are now required to ensure that the transaction reservation is large enough to handle logging done items and new intent items for the maximum possible chain length. Most callers are careful to keep the chain lengths low, so the overhead should be minimal. The decision to relog an intent item is made based on whether the intent was logged in a previous checkpoint, since there's no point in relogging an intent into the same checkpoint. Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Brian Foster <bfoster@redhat.com>
2020-09-28 07:18:13 +08:00
/* Relog intent items to keep the log moving. */
error = xfs_defer_relog(tp, &dop_pending);
if (error)
goto out_shutdown;
}
dfp = list_first_entry(&dop_pending, struct xfs_defer_pending,
dfp_list);
error = xfs_defer_finish_one(*tp, dfp);
if (error && error != -EAGAIN)
goto out_shutdown;
}
trace_xfs_defer_finish_done(*tp, _RET_IP_);
return 0;
out_shutdown:
xfs_defer_trans_abort(*tp, &dop_pending);
xfs_force_shutdown((*tp)->t_mountp, SHUTDOWN_CORRUPT_INCORE);
trace_xfs_defer_finish_error(*tp, error);
xfs_defer_cancel_list((*tp)->t_mountp, &dop_pending);
xfs_defer_cancel(*tp);
return error;
}
int
xfs_defer_finish(
struct xfs_trans **tp)
{
int error;
/*
* Finish and roll the transaction once more to avoid returning to the
* caller with a dirty transaction.
*/
error = xfs_defer_finish_noroll(tp);
if (error)
return error;
if ((*tp)->t_flags & XFS_TRANS_DIRTY) {
error = xfs_defer_trans_roll(tp);
if (error) {
xfs_force_shutdown((*tp)->t_mountp,
SHUTDOWN_CORRUPT_INCORE);
return error;
}
}
/* Reset LOWMODE now that we've finished all the dfops. */
ASSERT(list_empty(&(*tp)->t_dfops));
(*tp)->t_flags &= ~XFS_TRANS_LOWMODE;
return 0;
}
void
xfs_defer_cancel(
struct xfs_trans *tp)
{
struct xfs_mount *mp = tp->t_mountp;
trace_xfs_defer_cancel(tp, _RET_IP_);
xfs_defer_cancel_list(mp, &tp->t_dfops);
}
/* Add an item for later deferred processing. */
void
xfs_defer_add(
struct xfs_trans *tp,
enum xfs_defer_ops_type type,
struct list_head *li)
{
struct xfs_defer_pending *dfp = NULL;
xfs: allow queued AG intents to drain before scrubbing When a writer thread executes a chain of log intent items, the AG header buffer locks will cycle during a transaction roll to get from one intent item to the next in a chain. Although scrub takes all AG header buffer locks, this isn't sufficient to guard against scrub checking an AG while that writer thread is in the middle of finishing a chain because there's no higher level locking primitive guarding allocation groups. When there's a collision, cross-referencing between data structures (e.g. rmapbt and refcountbt) yields false corruption events; if repair is running, this results in incorrect repairs, which is catastrophic. Fix this by adding to the perag structure the count of active intents and make scrub wait until it has both AG header buffer locks and the intent counter reaches zero. One quirk of the drain code is that deferred bmap updates also bump and drop the intent counter. A fundamental decision made during the design phase of the reverse mapping feature is that updates to the rmapbt records are always made by the same code that updates the primary metadata. In other words, callers of bmapi functions expect that the bmapi functions will queue deferred rmap updates. Some parts of the reflink code queue deferred refcount (CUI) and bmap (BUI) updates in the same head transaction, but the deferred work manager completely finishes the CUI before the BUI work is started. As a result, the CUI drops the intent count long before the deferred rmap (RUI) update even has a chance to bump the intent count. The only way to keep the intent count elevated between the CUI and RUI is for the BUI to bump the counter until the RUI has been created. A second quirk of the intent drain code is that deferred work items must increment the intent counter as soon as the work item is added to the transaction. When a BUI completes and queues an RUI, the RUI must increment the counter before the BUI decrements it. The only way to accomplish this is to require that the counter be bumped as soon as the deferred work item is created in memory. In the next patches we'll improve on this facility, but this patch provides the basic functionality. Signed-off-by: Darrick J. Wong <djwong@kernel.org> Reviewed-by: Dave Chinner <dchinner@redhat.com>
2023-04-12 09:59:58 +08:00
const struct xfs_defer_op_type *ops = defer_op_types[type];
ASSERT(tp->t_flags & XFS_TRANS_PERM_LOG_RES);
BUILD_BUG_ON(ARRAY_SIZE(defer_op_types) != XFS_DEFER_OPS_TYPE_MAX);
/*
* Add the item to a pending item at the end of the intake list.
* If the last pending item has the same type, reuse it. Else,
* create a new pending item at the end of the intake list.
*/
if (!list_empty(&tp->t_dfops)) {
dfp = list_last_entry(&tp->t_dfops,
struct xfs_defer_pending, dfp_list);
if (dfp->dfp_type != type ||
(ops->max_items && dfp->dfp_count >= ops->max_items))
dfp = NULL;
}
if (!dfp) {
dfp = kmem_cache_zalloc(xfs_defer_pending_cache,
GFP_NOFS | __GFP_NOFAIL);
dfp->dfp_type = type;
dfp->dfp_intent = NULL;
dfp->dfp_done = NULL;
dfp->dfp_count = 0;
INIT_LIST_HEAD(&dfp->dfp_work);
list_add_tail(&dfp->dfp_list, &tp->t_dfops);
}
list_add_tail(li, &dfp->dfp_work);
xfs: allow queued AG intents to drain before scrubbing When a writer thread executes a chain of log intent items, the AG header buffer locks will cycle during a transaction roll to get from one intent item to the next in a chain. Although scrub takes all AG header buffer locks, this isn't sufficient to guard against scrub checking an AG while that writer thread is in the middle of finishing a chain because there's no higher level locking primitive guarding allocation groups. When there's a collision, cross-referencing between data structures (e.g. rmapbt and refcountbt) yields false corruption events; if repair is running, this results in incorrect repairs, which is catastrophic. Fix this by adding to the perag structure the count of active intents and make scrub wait until it has both AG header buffer locks and the intent counter reaches zero. One quirk of the drain code is that deferred bmap updates also bump and drop the intent counter. A fundamental decision made during the design phase of the reverse mapping feature is that updates to the rmapbt records are always made by the same code that updates the primary metadata. In other words, callers of bmapi functions expect that the bmapi functions will queue deferred rmap updates. Some parts of the reflink code queue deferred refcount (CUI) and bmap (BUI) updates in the same head transaction, but the deferred work manager completely finishes the CUI before the BUI work is started. As a result, the CUI drops the intent count long before the deferred rmap (RUI) update even has a chance to bump the intent count. The only way to keep the intent count elevated between the CUI and RUI is for the BUI to bump the counter until the RUI has been created. A second quirk of the intent drain code is that deferred work items must increment the intent counter as soon as the work item is added to the transaction. When a BUI completes and queues an RUI, the RUI must increment the counter before the BUI decrements it. The only way to accomplish this is to require that the counter be bumped as soon as the deferred work item is created in memory. In the next patches we'll improve on this facility, but this patch provides the basic functionality. Signed-off-by: Darrick J. Wong <djwong@kernel.org> Reviewed-by: Dave Chinner <dchinner@redhat.com>
2023-04-12 09:59:58 +08:00
trace_xfs_defer_add_item(tp->t_mountp, dfp, li);
dfp->dfp_count++;
}
xfs: support embedded dfops in transaction The dfops structure used by multi-transaction operations is typically stored on the stack and carried around by the associated transaction. The lifecycle of dfops does not quite match that of the transaction, but they are tightly related in that the former depends on the latter. The relationship of these objects is tight enough that we can avoid the cumbersome boilerplate code required in most cases to manage them separately by just embedding an xfs_defer_ops in the transaction itself. This means that a transaction allocation returns with an initialized dfops, a transaction commit finishes pending deferred items before the tx commit, a transaction cancel cancels the dfops before the transaction and a transaction dup operation transfers the current dfops state to the new transaction. The dup operation is slightly complicated by the fact that we can no longer just copy a dfops pointer from the old transaction to the new transaction. This is solved through a dfops move helper that transfers the pending items and other dfops state across the transactions. This also requires that transaction rolling code always refer to the transaction for the current dfops reference. Finally, to facilitate incremental conversion to the internal dfops and continue to support the current external dfops mode of operation, create the new ->t_dfops_internal field with a layer of indirection. On allocation, ->t_dfops points to the internal dfops. This state is overridden by callers who re-init a local dfops on the transaction. Once ->t_dfops is overridden, the external dfops reference is maintained as the transaction rolls. This patch adds the fundamental ability to support an internal dfops. All codepaths that perform deferred processing continue to override the internal dfops until they are converted over in subsequent patches. Signed-off-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Bill O'Donnell <billodo@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2018-07-25 04:43:11 +08:00
/*
* Move deferred ops from one transaction to another and reset the source to
* initial state. This is primarily used to carry state forward across
* transaction rolls with pending dfops.
xfs: support embedded dfops in transaction The dfops structure used by multi-transaction operations is typically stored on the stack and carried around by the associated transaction. The lifecycle of dfops does not quite match that of the transaction, but they are tightly related in that the former depends on the latter. The relationship of these objects is tight enough that we can avoid the cumbersome boilerplate code required in most cases to manage them separately by just embedding an xfs_defer_ops in the transaction itself. This means that a transaction allocation returns with an initialized dfops, a transaction commit finishes pending deferred items before the tx commit, a transaction cancel cancels the dfops before the transaction and a transaction dup operation transfers the current dfops state to the new transaction. The dup operation is slightly complicated by the fact that we can no longer just copy a dfops pointer from the old transaction to the new transaction. This is solved through a dfops move helper that transfers the pending items and other dfops state across the transactions. This also requires that transaction rolling code always refer to the transaction for the current dfops reference. Finally, to facilitate incremental conversion to the internal dfops and continue to support the current external dfops mode of operation, create the new ->t_dfops_internal field with a layer of indirection. On allocation, ->t_dfops points to the internal dfops. This state is overridden by callers who re-init a local dfops on the transaction. Once ->t_dfops is overridden, the external dfops reference is maintained as the transaction rolls. This patch adds the fundamental ability to support an internal dfops. All codepaths that perform deferred processing continue to override the internal dfops until they are converted over in subsequent patches. Signed-off-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Bill O'Donnell <billodo@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2018-07-25 04:43:11 +08:00
*/
void
xfs_defer_move(
struct xfs_trans *dtp,
struct xfs_trans *stp)
xfs: support embedded dfops in transaction The dfops structure used by multi-transaction operations is typically stored on the stack and carried around by the associated transaction. The lifecycle of dfops does not quite match that of the transaction, but they are tightly related in that the former depends on the latter. The relationship of these objects is tight enough that we can avoid the cumbersome boilerplate code required in most cases to manage them separately by just embedding an xfs_defer_ops in the transaction itself. This means that a transaction allocation returns with an initialized dfops, a transaction commit finishes pending deferred items before the tx commit, a transaction cancel cancels the dfops before the transaction and a transaction dup operation transfers the current dfops state to the new transaction. The dup operation is slightly complicated by the fact that we can no longer just copy a dfops pointer from the old transaction to the new transaction. This is solved through a dfops move helper that transfers the pending items and other dfops state across the transactions. This also requires that transaction rolling code always refer to the transaction for the current dfops reference. Finally, to facilitate incremental conversion to the internal dfops and continue to support the current external dfops mode of operation, create the new ->t_dfops_internal field with a layer of indirection. On allocation, ->t_dfops points to the internal dfops. This state is overridden by callers who re-init a local dfops on the transaction. Once ->t_dfops is overridden, the external dfops reference is maintained as the transaction rolls. This patch adds the fundamental ability to support an internal dfops. All codepaths that perform deferred processing continue to override the internal dfops until they are converted over in subsequent patches. Signed-off-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Bill O'Donnell <billodo@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2018-07-25 04:43:11 +08:00
{
list_splice_init(&stp->t_dfops, &dtp->t_dfops);
xfs: support embedded dfops in transaction The dfops structure used by multi-transaction operations is typically stored on the stack and carried around by the associated transaction. The lifecycle of dfops does not quite match that of the transaction, but they are tightly related in that the former depends on the latter. The relationship of these objects is tight enough that we can avoid the cumbersome boilerplate code required in most cases to manage them separately by just embedding an xfs_defer_ops in the transaction itself. This means that a transaction allocation returns with an initialized dfops, a transaction commit finishes pending deferred items before the tx commit, a transaction cancel cancels the dfops before the transaction and a transaction dup operation transfers the current dfops state to the new transaction. The dup operation is slightly complicated by the fact that we can no longer just copy a dfops pointer from the old transaction to the new transaction. This is solved through a dfops move helper that transfers the pending items and other dfops state across the transactions. This also requires that transaction rolling code always refer to the transaction for the current dfops reference. Finally, to facilitate incremental conversion to the internal dfops and continue to support the current external dfops mode of operation, create the new ->t_dfops_internal field with a layer of indirection. On allocation, ->t_dfops points to the internal dfops. This state is overridden by callers who re-init a local dfops on the transaction. Once ->t_dfops is overridden, the external dfops reference is maintained as the transaction rolls. This patch adds the fundamental ability to support an internal dfops. All codepaths that perform deferred processing continue to override the internal dfops until they are converted over in subsequent patches. Signed-off-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Bill O'Donnell <billodo@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2018-07-25 04:43:11 +08:00
/*
* Low free space mode was historically controlled by a dfops field.
* This meant that low mode state potentially carried across multiple
* transaction rolls. Transfer low mode on a dfops move to preserve
* that behavior.
*/
dtp->t_flags |= (stp->t_flags & XFS_TRANS_LOWMODE);
stp->t_flags &= ~XFS_TRANS_LOWMODE;
xfs: support embedded dfops in transaction The dfops structure used by multi-transaction operations is typically stored on the stack and carried around by the associated transaction. The lifecycle of dfops does not quite match that of the transaction, but they are tightly related in that the former depends on the latter. The relationship of these objects is tight enough that we can avoid the cumbersome boilerplate code required in most cases to manage them separately by just embedding an xfs_defer_ops in the transaction itself. This means that a transaction allocation returns with an initialized dfops, a transaction commit finishes pending deferred items before the tx commit, a transaction cancel cancels the dfops before the transaction and a transaction dup operation transfers the current dfops state to the new transaction. The dup operation is slightly complicated by the fact that we can no longer just copy a dfops pointer from the old transaction to the new transaction. This is solved through a dfops move helper that transfers the pending items and other dfops state across the transactions. This also requires that transaction rolling code always refer to the transaction for the current dfops reference. Finally, to facilitate incremental conversion to the internal dfops and continue to support the current external dfops mode of operation, create the new ->t_dfops_internal field with a layer of indirection. On allocation, ->t_dfops points to the internal dfops. This state is overridden by callers who re-init a local dfops on the transaction. Once ->t_dfops is overridden, the external dfops reference is maintained as the transaction rolls. This patch adds the fundamental ability to support an internal dfops. All codepaths that perform deferred processing continue to override the internal dfops until they are converted over in subsequent patches. Signed-off-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Bill O'Donnell <billodo@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2018-07-25 04:43:11 +08:00
}
/*
* Prepare a chain of fresh deferred ops work items to be completed later. Log
* recovery requires the ability to put off until later the actual finishing
* work so that it can process unfinished items recovered from the log in
* correct order.
*
* Create and log intent items for all the work that we're capturing so that we
* can be assured that the items will get replayed if the system goes down
xfs: proper replay of deferred ops queued during log recovery When we replay unfinished intent items that have been recovered from the log, it's possible that the replay will cause the creation of more deferred work items. As outlined in commit 509955823cc9c ("xfs: log recovery should replay deferred ops in order"), later work items have an implicit ordering dependency on earlier work items. Therefore, recovery must replay the items (both recovered and created) in the same order that they would have been during normal operation. For log recovery, we enforce this ordering by using an empty transaction to collect deferred ops that get created in the process of recovering a log intent item to prevent them from being committed before the rest of the recovered intent items. After we finish committing all the recovered log items, we allocate a transaction with an enormous block reservation, splice our huge list of created deferred ops into that transaction, and commit it, thereby finishing all those ops. This is /really/ hokey -- it's the one place in XFS where we allow nested transactions; the splicing of the defer ops list is is inelegant and has to be done twice per recovery function; and the broken way we handle inode pointers and block reservations cause subtle use-after-free and allocator problems that will be fixed by this patch and the two patches after it. Therefore, replace the hokey empty transaction with a structure designed to capture each chain of deferred ops that are created as part of recovering a single unfinished log intent. Finally, refactor the loop that replays those chains to do so using one transaction per chain. Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de>
2020-09-26 08:39:37 +08:00
* before log recovery gets a chance to finish the work it put off. The entire
* deferred ops state is transferred to the capture structure and the
* transaction is then ready for the caller to commit it. If there are no
* intent items to capture, this function returns NULL.
*
* If capture_ip is not NULL, the capture structure will obtain an extra
* reference to the inode.
*/
xfs: proper replay of deferred ops queued during log recovery When we replay unfinished intent items that have been recovered from the log, it's possible that the replay will cause the creation of more deferred work items. As outlined in commit 509955823cc9c ("xfs: log recovery should replay deferred ops in order"), later work items have an implicit ordering dependency on earlier work items. Therefore, recovery must replay the items (both recovered and created) in the same order that they would have been during normal operation. For log recovery, we enforce this ordering by using an empty transaction to collect deferred ops that get created in the process of recovering a log intent item to prevent them from being committed before the rest of the recovered intent items. After we finish committing all the recovered log items, we allocate a transaction with an enormous block reservation, splice our huge list of created deferred ops into that transaction, and commit it, thereby finishing all those ops. This is /really/ hokey -- it's the one place in XFS where we allow nested transactions; the splicing of the defer ops list is is inelegant and has to be done twice per recovery function; and the broken way we handle inode pointers and block reservations cause subtle use-after-free and allocator problems that will be fixed by this patch and the two patches after it. Therefore, replace the hokey empty transaction with a structure designed to capture each chain of deferred ops that are created as part of recovering a single unfinished log intent. Finally, refactor the loop that replays those chains to do so using one transaction per chain. Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de>
2020-09-26 08:39:37 +08:00
static struct xfs_defer_capture *
xfs_defer_ops_capture(
struct xfs_trans *tp)
xfs: proper replay of deferred ops queued during log recovery When we replay unfinished intent items that have been recovered from the log, it's possible that the replay will cause the creation of more deferred work items. As outlined in commit 509955823cc9c ("xfs: log recovery should replay deferred ops in order"), later work items have an implicit ordering dependency on earlier work items. Therefore, recovery must replay the items (both recovered and created) in the same order that they would have been during normal operation. For log recovery, we enforce this ordering by using an empty transaction to collect deferred ops that get created in the process of recovering a log intent item to prevent them from being committed before the rest of the recovered intent items. After we finish committing all the recovered log items, we allocate a transaction with an enormous block reservation, splice our huge list of created deferred ops into that transaction, and commit it, thereby finishing all those ops. This is /really/ hokey -- it's the one place in XFS where we allow nested transactions; the splicing of the defer ops list is is inelegant and has to be done twice per recovery function; and the broken way we handle inode pointers and block reservations cause subtle use-after-free and allocator problems that will be fixed by this patch and the two patches after it. Therefore, replace the hokey empty transaction with a structure designed to capture each chain of deferred ops that are created as part of recovering a single unfinished log intent. Finally, refactor the loop that replays those chains to do so using one transaction per chain. Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de>
2020-09-26 08:39:37 +08:00
{
struct xfs_defer_capture *dfc;
unsigned short i;
int error;
xfs: proper replay of deferred ops queued during log recovery When we replay unfinished intent items that have been recovered from the log, it's possible that the replay will cause the creation of more deferred work items. As outlined in commit 509955823cc9c ("xfs: log recovery should replay deferred ops in order"), later work items have an implicit ordering dependency on earlier work items. Therefore, recovery must replay the items (both recovered and created) in the same order that they would have been during normal operation. For log recovery, we enforce this ordering by using an empty transaction to collect deferred ops that get created in the process of recovering a log intent item to prevent them from being committed before the rest of the recovered intent items. After we finish committing all the recovered log items, we allocate a transaction with an enormous block reservation, splice our huge list of created deferred ops into that transaction, and commit it, thereby finishing all those ops. This is /really/ hokey -- it's the one place in XFS where we allow nested transactions; the splicing of the defer ops list is is inelegant and has to be done twice per recovery function; and the broken way we handle inode pointers and block reservations cause subtle use-after-free and allocator problems that will be fixed by this patch and the two patches after it. Therefore, replace the hokey empty transaction with a structure designed to capture each chain of deferred ops that are created as part of recovering a single unfinished log intent. Finally, refactor the loop that replays those chains to do so using one transaction per chain. Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de>
2020-09-26 08:39:37 +08:00
if (list_empty(&tp->t_dfops))
return NULL;
xfs: share xattr name and value buffers when logging xattr updates While running xfs/297 and generic/642, I noticed a crash in xfs_attri_item_relog when it tries to copy the attr name to the new xattri log item. I think what happened here was that we called ->iop_commit on the old attri item (which nulls out the pointers) as part of a log force at the same time that a chained attr operation was ongoing. The system was busy enough that at some later point, the defer ops operation decided it was necessary to relog the attri log item, but as we've detached the name buffer from the old attri log item, we can't copy it to the new one, and kaboom. I think there's a broader refcounting problem with LARP mode -- the setxattr code can return to userspace before the CIL actually formats and commits the log item, which results in a UAF bug. Therefore, the xattr log item needs to be able to retain a reference to the name and value buffers until the log items have completely cleared the log. Furthermore, each time we create an intent log item, we allocate new memory and (re)copy the contents; sharing here would be very useful. Solve the UAF and the unnecessary memory allocations by having the log code create a single refcounted buffer to contain the name and value contents. This buffer can be passed from old to new during a relog operation, and the logging code can (optionally) attach it to the xfs_attr_item for reuse when LARP mode is enabled. This also fixes a problem where the xfs_attri_log_item objects weren't being freed back to the same cache where they came from. Signed-off-by: Darrick J. Wong <djwong@kernel.org> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2022-05-23 06:43:46 +08:00
error = xfs_defer_create_intents(tp);
if (error < 0)
return ERR_PTR(error);
xfs: proper replay of deferred ops queued during log recovery When we replay unfinished intent items that have been recovered from the log, it's possible that the replay will cause the creation of more deferred work items. As outlined in commit 509955823cc9c ("xfs: log recovery should replay deferred ops in order"), later work items have an implicit ordering dependency on earlier work items. Therefore, recovery must replay the items (both recovered and created) in the same order that they would have been during normal operation. For log recovery, we enforce this ordering by using an empty transaction to collect deferred ops that get created in the process of recovering a log intent item to prevent them from being committed before the rest of the recovered intent items. After we finish committing all the recovered log items, we allocate a transaction with an enormous block reservation, splice our huge list of created deferred ops into that transaction, and commit it, thereby finishing all those ops. This is /really/ hokey -- it's the one place in XFS where we allow nested transactions; the splicing of the defer ops list is is inelegant and has to be done twice per recovery function; and the broken way we handle inode pointers and block reservations cause subtle use-after-free and allocator problems that will be fixed by this patch and the two patches after it. Therefore, replace the hokey empty transaction with a structure designed to capture each chain of deferred ops that are created as part of recovering a single unfinished log intent. Finally, refactor the loop that replays those chains to do so using one transaction per chain. Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de>
2020-09-26 08:39:37 +08:00
/* Create an object to capture the defer ops. */
dfc = kmem_zalloc(sizeof(*dfc), KM_NOFS);
INIT_LIST_HEAD(&dfc->dfc_list);
INIT_LIST_HEAD(&dfc->dfc_dfops);
/* Move the dfops chain and transaction state to the capture struct. */
list_splice_init(&tp->t_dfops, &dfc->dfc_dfops);
dfc->dfc_tpflags = tp->t_flags & XFS_TRANS_LOWMODE;
tp->t_flags &= ~XFS_TRANS_LOWMODE;
/* Capture the remaining block reservations along with the dfops. */
dfc->dfc_blkres = tp->t_blk_res - tp->t_blk_res_used;
dfc->dfc_rtxres = tp->t_rtx_res - tp->t_rtx_res_used;
/* Preserve the log reservation size. */
dfc->dfc_logres = tp->t_log_res;
error = xfs_defer_save_resources(&dfc->dfc_held, tp);
if (error) {
/*
* Resource capture should never fail, but if it does, we
* still have to shut down the log and release things
* properly.
*/
xfs_force_shutdown(tp->t_mountp, SHUTDOWN_CORRUPT_INCORE);
}
/*
* Grab extra references to the inodes and buffers because callers are
* expected to release their held references after we commit the
* transaction.
*/
for (i = 0; i < dfc->dfc_held.dr_inos; i++) {
ASSERT(xfs_isilocked(dfc->dfc_held.dr_ip[i], XFS_ILOCK_EXCL));
ihold(VFS_I(dfc->dfc_held.dr_ip[i]));
}
for (i = 0; i < dfc->dfc_held.dr_bufs; i++)
xfs_buf_hold(dfc->dfc_held.dr_bp[i]);
xfs: proper replay of deferred ops queued during log recovery When we replay unfinished intent items that have been recovered from the log, it's possible that the replay will cause the creation of more deferred work items. As outlined in commit 509955823cc9c ("xfs: log recovery should replay deferred ops in order"), later work items have an implicit ordering dependency on earlier work items. Therefore, recovery must replay the items (both recovered and created) in the same order that they would have been during normal operation. For log recovery, we enforce this ordering by using an empty transaction to collect deferred ops that get created in the process of recovering a log intent item to prevent them from being committed before the rest of the recovered intent items. After we finish committing all the recovered log items, we allocate a transaction with an enormous block reservation, splice our huge list of created deferred ops into that transaction, and commit it, thereby finishing all those ops. This is /really/ hokey -- it's the one place in XFS where we allow nested transactions; the splicing of the defer ops list is is inelegant and has to be done twice per recovery function; and the broken way we handle inode pointers and block reservations cause subtle use-after-free and allocator problems that will be fixed by this patch and the two patches after it. Therefore, replace the hokey empty transaction with a structure designed to capture each chain of deferred ops that are created as part of recovering a single unfinished log intent. Finally, refactor the loop that replays those chains to do so using one transaction per chain. Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de>
2020-09-26 08:39:37 +08:00
return dfc;
}
/* Release all resources that we used to capture deferred ops. */
void
xfs_defer_ops_capture_free(
xfs: proper replay of deferred ops queued during log recovery When we replay unfinished intent items that have been recovered from the log, it's possible that the replay will cause the creation of more deferred work items. As outlined in commit 509955823cc9c ("xfs: log recovery should replay deferred ops in order"), later work items have an implicit ordering dependency on earlier work items. Therefore, recovery must replay the items (both recovered and created) in the same order that they would have been during normal operation. For log recovery, we enforce this ordering by using an empty transaction to collect deferred ops that get created in the process of recovering a log intent item to prevent them from being committed before the rest of the recovered intent items. After we finish committing all the recovered log items, we allocate a transaction with an enormous block reservation, splice our huge list of created deferred ops into that transaction, and commit it, thereby finishing all those ops. This is /really/ hokey -- it's the one place in XFS where we allow nested transactions; the splicing of the defer ops list is is inelegant and has to be done twice per recovery function; and the broken way we handle inode pointers and block reservations cause subtle use-after-free and allocator problems that will be fixed by this patch and the two patches after it. Therefore, replace the hokey empty transaction with a structure designed to capture each chain of deferred ops that are created as part of recovering a single unfinished log intent. Finally, refactor the loop that replays those chains to do so using one transaction per chain. Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de>
2020-09-26 08:39:37 +08:00
struct xfs_mount *mp,
struct xfs_defer_capture *dfc)
{
unsigned short i;
xfs: proper replay of deferred ops queued during log recovery When we replay unfinished intent items that have been recovered from the log, it's possible that the replay will cause the creation of more deferred work items. As outlined in commit 509955823cc9c ("xfs: log recovery should replay deferred ops in order"), later work items have an implicit ordering dependency on earlier work items. Therefore, recovery must replay the items (both recovered and created) in the same order that they would have been during normal operation. For log recovery, we enforce this ordering by using an empty transaction to collect deferred ops that get created in the process of recovering a log intent item to prevent them from being committed before the rest of the recovered intent items. After we finish committing all the recovered log items, we allocate a transaction with an enormous block reservation, splice our huge list of created deferred ops into that transaction, and commit it, thereby finishing all those ops. This is /really/ hokey -- it's the one place in XFS where we allow nested transactions; the splicing of the defer ops list is is inelegant and has to be done twice per recovery function; and the broken way we handle inode pointers and block reservations cause subtle use-after-free and allocator problems that will be fixed by this patch and the two patches after it. Therefore, replace the hokey empty transaction with a structure designed to capture each chain of deferred ops that are created as part of recovering a single unfinished log intent. Finally, refactor the loop that replays those chains to do so using one transaction per chain. Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de>
2020-09-26 08:39:37 +08:00
xfs_defer_cancel_list(mp, &dfc->dfc_dfops);
for (i = 0; i < dfc->dfc_held.dr_bufs; i++)
xfs_buf_relse(dfc->dfc_held.dr_bp[i]);
for (i = 0; i < dfc->dfc_held.dr_inos; i++)
xfs_irele(dfc->dfc_held.dr_ip[i]);
xfs: proper replay of deferred ops queued during log recovery When we replay unfinished intent items that have been recovered from the log, it's possible that the replay will cause the creation of more deferred work items. As outlined in commit 509955823cc9c ("xfs: log recovery should replay deferred ops in order"), later work items have an implicit ordering dependency on earlier work items. Therefore, recovery must replay the items (both recovered and created) in the same order that they would have been during normal operation. For log recovery, we enforce this ordering by using an empty transaction to collect deferred ops that get created in the process of recovering a log intent item to prevent them from being committed before the rest of the recovered intent items. After we finish committing all the recovered log items, we allocate a transaction with an enormous block reservation, splice our huge list of created deferred ops into that transaction, and commit it, thereby finishing all those ops. This is /really/ hokey -- it's the one place in XFS where we allow nested transactions; the splicing of the defer ops list is is inelegant and has to be done twice per recovery function; and the broken way we handle inode pointers and block reservations cause subtle use-after-free and allocator problems that will be fixed by this patch and the two patches after it. Therefore, replace the hokey empty transaction with a structure designed to capture each chain of deferred ops that are created as part of recovering a single unfinished log intent. Finally, refactor the loop that replays those chains to do so using one transaction per chain. Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de>
2020-09-26 08:39:37 +08:00
kmem_free(dfc);
}
/*
* Capture any deferred ops and commit the transaction. This is the last step
* needed to finish a log intent item that we recovered from the log. If any
* of the deferred ops operate on an inode, the caller must pass in that inode
* so that the reference can be transferred to the capture structure. The
* caller must hold ILOCK_EXCL on the inode, and must unlock it before calling
* xfs_defer_ops_continue.
xfs: proper replay of deferred ops queued during log recovery When we replay unfinished intent items that have been recovered from the log, it's possible that the replay will cause the creation of more deferred work items. As outlined in commit 509955823cc9c ("xfs: log recovery should replay deferred ops in order"), later work items have an implicit ordering dependency on earlier work items. Therefore, recovery must replay the items (both recovered and created) in the same order that they would have been during normal operation. For log recovery, we enforce this ordering by using an empty transaction to collect deferred ops that get created in the process of recovering a log intent item to prevent them from being committed before the rest of the recovered intent items. After we finish committing all the recovered log items, we allocate a transaction with an enormous block reservation, splice our huge list of created deferred ops into that transaction, and commit it, thereby finishing all those ops. This is /really/ hokey -- it's the one place in XFS where we allow nested transactions; the splicing of the defer ops list is is inelegant and has to be done twice per recovery function; and the broken way we handle inode pointers and block reservations cause subtle use-after-free and allocator problems that will be fixed by this patch and the two patches after it. Therefore, replace the hokey empty transaction with a structure designed to capture each chain of deferred ops that are created as part of recovering a single unfinished log intent. Finally, refactor the loop that replays those chains to do so using one transaction per chain. Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de>
2020-09-26 08:39:37 +08:00
*/
int
xfs_defer_ops_capture_and_commit(
struct xfs_trans *tp,
struct list_head *capture_list)
{
struct xfs_mount *mp = tp->t_mountp;
struct xfs_defer_capture *dfc;
int error;
/* If we don't capture anything, commit transaction and exit. */
dfc = xfs_defer_ops_capture(tp);
xfs: share xattr name and value buffers when logging xattr updates While running xfs/297 and generic/642, I noticed a crash in xfs_attri_item_relog when it tries to copy the attr name to the new xattri log item. I think what happened here was that we called ->iop_commit on the old attri item (which nulls out the pointers) as part of a log force at the same time that a chained attr operation was ongoing. The system was busy enough that at some later point, the defer ops operation decided it was necessary to relog the attri log item, but as we've detached the name buffer from the old attri log item, we can't copy it to the new one, and kaboom. I think there's a broader refcounting problem with LARP mode -- the setxattr code can return to userspace before the CIL actually formats and commits the log item, which results in a UAF bug. Therefore, the xattr log item needs to be able to retain a reference to the name and value buffers until the log items have completely cleared the log. Furthermore, each time we create an intent log item, we allocate new memory and (re)copy the contents; sharing here would be very useful. Solve the UAF and the unnecessary memory allocations by having the log code create a single refcounted buffer to contain the name and value contents. This buffer can be passed from old to new during a relog operation, and the logging code can (optionally) attach it to the xfs_attr_item for reuse when LARP mode is enabled. This also fixes a problem where the xfs_attri_log_item objects weren't being freed back to the same cache where they came from. Signed-off-by: Darrick J. Wong <djwong@kernel.org> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2022-05-23 06:43:46 +08:00
if (IS_ERR(dfc)) {
xfs_trans_cancel(tp);
return PTR_ERR(dfc);
}
xfs: proper replay of deferred ops queued during log recovery When we replay unfinished intent items that have been recovered from the log, it's possible that the replay will cause the creation of more deferred work items. As outlined in commit 509955823cc9c ("xfs: log recovery should replay deferred ops in order"), later work items have an implicit ordering dependency on earlier work items. Therefore, recovery must replay the items (both recovered and created) in the same order that they would have been during normal operation. For log recovery, we enforce this ordering by using an empty transaction to collect deferred ops that get created in the process of recovering a log intent item to prevent them from being committed before the rest of the recovered intent items. After we finish committing all the recovered log items, we allocate a transaction with an enormous block reservation, splice our huge list of created deferred ops into that transaction, and commit it, thereby finishing all those ops. This is /really/ hokey -- it's the one place in XFS where we allow nested transactions; the splicing of the defer ops list is is inelegant and has to be done twice per recovery function; and the broken way we handle inode pointers and block reservations cause subtle use-after-free and allocator problems that will be fixed by this patch and the two patches after it. Therefore, replace the hokey empty transaction with a structure designed to capture each chain of deferred ops that are created as part of recovering a single unfinished log intent. Finally, refactor the loop that replays those chains to do so using one transaction per chain. Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de>
2020-09-26 08:39:37 +08:00
if (!dfc)
return xfs_trans_commit(tp);
/* Commit the transaction and add the capture structure to the list. */
error = xfs_trans_commit(tp);
if (error) {
xfs_defer_ops_capture_free(mp, dfc);
xfs: proper replay of deferred ops queued during log recovery When we replay unfinished intent items that have been recovered from the log, it's possible that the replay will cause the creation of more deferred work items. As outlined in commit 509955823cc9c ("xfs: log recovery should replay deferred ops in order"), later work items have an implicit ordering dependency on earlier work items. Therefore, recovery must replay the items (both recovered and created) in the same order that they would have been during normal operation. For log recovery, we enforce this ordering by using an empty transaction to collect deferred ops that get created in the process of recovering a log intent item to prevent them from being committed before the rest of the recovered intent items. After we finish committing all the recovered log items, we allocate a transaction with an enormous block reservation, splice our huge list of created deferred ops into that transaction, and commit it, thereby finishing all those ops. This is /really/ hokey -- it's the one place in XFS where we allow nested transactions; the splicing of the defer ops list is is inelegant and has to be done twice per recovery function; and the broken way we handle inode pointers and block reservations cause subtle use-after-free and allocator problems that will be fixed by this patch and the two patches after it. Therefore, replace the hokey empty transaction with a structure designed to capture each chain of deferred ops that are created as part of recovering a single unfinished log intent. Finally, refactor the loop that replays those chains to do so using one transaction per chain. Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de>
2020-09-26 08:39:37 +08:00
return error;
}
list_add_tail(&dfc->dfc_list, capture_list);
return 0;
}
/*
* Attach a chain of captured deferred ops to a new transaction and free the
* capture structure. If an inode was captured, it will be passed back to the
* caller with ILOCK_EXCL held and joined to the transaction with lockflags==0.
* The caller now owns the inode reference.
xfs: proper replay of deferred ops queued during log recovery When we replay unfinished intent items that have been recovered from the log, it's possible that the replay will cause the creation of more deferred work items. As outlined in commit 509955823cc9c ("xfs: log recovery should replay deferred ops in order"), later work items have an implicit ordering dependency on earlier work items. Therefore, recovery must replay the items (both recovered and created) in the same order that they would have been during normal operation. For log recovery, we enforce this ordering by using an empty transaction to collect deferred ops that get created in the process of recovering a log intent item to prevent them from being committed before the rest of the recovered intent items. After we finish committing all the recovered log items, we allocate a transaction with an enormous block reservation, splice our huge list of created deferred ops into that transaction, and commit it, thereby finishing all those ops. This is /really/ hokey -- it's the one place in XFS where we allow nested transactions; the splicing of the defer ops list is is inelegant and has to be done twice per recovery function; and the broken way we handle inode pointers and block reservations cause subtle use-after-free and allocator problems that will be fixed by this patch and the two patches after it. Therefore, replace the hokey empty transaction with a structure designed to capture each chain of deferred ops that are created as part of recovering a single unfinished log intent. Finally, refactor the loop that replays those chains to do so using one transaction per chain. Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de>
2020-09-26 08:39:37 +08:00
*/
void
xfs_defer_ops_continue(
struct xfs_defer_capture *dfc,
struct xfs_trans *tp,
struct xfs_defer_resources *dres)
{
unsigned int i;
xfs: proper replay of deferred ops queued during log recovery When we replay unfinished intent items that have been recovered from the log, it's possible that the replay will cause the creation of more deferred work items. As outlined in commit 509955823cc9c ("xfs: log recovery should replay deferred ops in order"), later work items have an implicit ordering dependency on earlier work items. Therefore, recovery must replay the items (both recovered and created) in the same order that they would have been during normal operation. For log recovery, we enforce this ordering by using an empty transaction to collect deferred ops that get created in the process of recovering a log intent item to prevent them from being committed before the rest of the recovered intent items. After we finish committing all the recovered log items, we allocate a transaction with an enormous block reservation, splice our huge list of created deferred ops into that transaction, and commit it, thereby finishing all those ops. This is /really/ hokey -- it's the one place in XFS where we allow nested transactions; the splicing of the defer ops list is is inelegant and has to be done twice per recovery function; and the broken way we handle inode pointers and block reservations cause subtle use-after-free and allocator problems that will be fixed by this patch and the two patches after it. Therefore, replace the hokey empty transaction with a structure designed to capture each chain of deferred ops that are created as part of recovering a single unfinished log intent. Finally, refactor the loop that replays those chains to do so using one transaction per chain. Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de>
2020-09-26 08:39:37 +08:00
ASSERT(tp->t_flags & XFS_TRANS_PERM_LOG_RES);
ASSERT(!(tp->t_flags & XFS_TRANS_DIRTY));
/* Lock the captured resources to the new transaction. */
if (dfc->dfc_held.dr_inos == 2)
xfs_lock_two_inodes(dfc->dfc_held.dr_ip[0], XFS_ILOCK_EXCL,
dfc->dfc_held.dr_ip[1], XFS_ILOCK_EXCL);
else if (dfc->dfc_held.dr_inos == 1)
xfs_ilock(dfc->dfc_held.dr_ip[0], XFS_ILOCK_EXCL);
for (i = 0; i < dfc->dfc_held.dr_bufs; i++)
xfs_buf_lock(dfc->dfc_held.dr_bp[i]);
/* Join the captured resources to the new transaction. */
xfs_defer_restore_resources(tp, &dfc->dfc_held);
memcpy(dres, &dfc->dfc_held, sizeof(struct xfs_defer_resources));
dres->dr_bufs = 0;
xfs: proper replay of deferred ops queued during log recovery When we replay unfinished intent items that have been recovered from the log, it's possible that the replay will cause the creation of more deferred work items. As outlined in commit 509955823cc9c ("xfs: log recovery should replay deferred ops in order"), later work items have an implicit ordering dependency on earlier work items. Therefore, recovery must replay the items (both recovered and created) in the same order that they would have been during normal operation. For log recovery, we enforce this ordering by using an empty transaction to collect deferred ops that get created in the process of recovering a log intent item to prevent them from being committed before the rest of the recovered intent items. After we finish committing all the recovered log items, we allocate a transaction with an enormous block reservation, splice our huge list of created deferred ops into that transaction, and commit it, thereby finishing all those ops. This is /really/ hokey -- it's the one place in XFS where we allow nested transactions; the splicing of the defer ops list is is inelegant and has to be done twice per recovery function; and the broken way we handle inode pointers and block reservations cause subtle use-after-free and allocator problems that will be fixed by this patch and the two patches after it. Therefore, replace the hokey empty transaction with a structure designed to capture each chain of deferred ops that are created as part of recovering a single unfinished log intent. Finally, refactor the loop that replays those chains to do so using one transaction per chain. Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de>
2020-09-26 08:39:37 +08:00
/* Move captured dfops chain and state to the transaction. */
list_splice_init(&dfc->dfc_dfops, &tp->t_dfops);
tp->t_flags |= dfc->dfc_tpflags;
kmem_free(dfc);
}
/* Release the resources captured and continued during recovery. */
void
xfs_defer_resources_rele(
struct xfs_defer_resources *dres)
{
unsigned short i;
for (i = 0; i < dres->dr_inos; i++) {
xfs_iunlock(dres->dr_ip[i], XFS_ILOCK_EXCL);
xfs_irele(dres->dr_ip[i]);
dres->dr_ip[i] = NULL;
}
for (i = 0; i < dres->dr_bufs; i++) {
xfs_buf_relse(dres->dr_bp[i]);
dres->dr_bp[i] = NULL;
}
dres->dr_inos = 0;
dres->dr_bufs = 0;
dres->dr_ordered = 0;
}
static inline int __init
xfs_defer_init_cache(void)
{
xfs_defer_pending_cache = kmem_cache_create("xfs_defer_pending",
sizeof(struct xfs_defer_pending),
0, 0, NULL);
return xfs_defer_pending_cache != NULL ? 0 : -ENOMEM;
}
static inline void
xfs_defer_destroy_cache(void)
{
kmem_cache_destroy(xfs_defer_pending_cache);
xfs_defer_pending_cache = NULL;
}
/* Set up caches for deferred work items. */
int __init
xfs_defer_init_item_caches(void)
{
int error;
error = xfs_defer_init_cache();
if (error)
return error;
error = xfs_rmap_intent_init_cache();
if (error)
goto err;
error = xfs_refcount_intent_init_cache();
if (error)
goto err;
error = xfs_bmap_intent_init_cache();
if (error)
goto err;
error = xfs_extfree_intent_init_cache();
if (error)
goto err;
error = xfs_attr_intent_init_cache();
xfs: Set up infrastructure for log attribute replay Currently attributes are modified directly across one or more transactions. But they are not logged or replayed in the event of an error. The goal of log attr replay is to enable logging and replaying of attribute operations using the existing delayed operations infrastructure. This will later enable the attributes to become part of larger multi part operations that also must first be recorded to the log. This is mostly of interest in the scheme of parent pointers which would need to maintain an attribute containing parent inode information any time an inode is moved, created, or removed. Parent pointers would then be of interest to any feature that would need to quickly derive an inode path from the mount point. Online scrub, nfs lookups and fs grow or shrink operations are all features that could take advantage of this. This patch adds two new log item types for setting or removing attributes as deferred operations. The xfs_attri_log_item will log an intent to set or remove an attribute. The corresponding xfs_attrd_log_item holds a reference to the xfs_attri_log_item and is freed once the transaction is done. Both log items use a generic xfs_attr_log_format structure that contains the attribute name, value, flags, inode, and an op_flag that indicates if the operations is a set or remove. [dchinner: added extra little bits needed for intent whiteouts] Signed-off-by: Allison Henderson <allison.henderson@oracle.com> Reviewed-by: Chandan Babu R <chandanrlinux@gmail.com> Reviewed-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Dave Chinner <david@fromorbit.com>
2022-05-04 10:41:02 +08:00
if (error)
goto err;
return 0;
err:
xfs_defer_destroy_item_caches();
return error;
}
/* Destroy all the deferred work item caches, if they've been allocated. */
void
xfs_defer_destroy_item_caches(void)
{
xfs_attr_intent_destroy_cache();
xfs_extfree_intent_destroy_cache();
xfs_bmap_intent_destroy_cache();
xfs_refcount_intent_destroy_cache();
xfs_rmap_intent_destroy_cache();
xfs_defer_destroy_cache();
}