OpenCloudOS-Kernel/drivers/infiniband/hw/mlx4/cq.c

876 lines
22 KiB
C
Raw Normal View History

/*
* Copyright (c) 2007 Cisco Systems, Inc. All rights reserved.
* Copyright (c) 2007, 2008 Mellanox Technologies. All rights reserved.
*
* This software is available to you under a choice of one of two
* licenses. You may choose to be licensed under the terms of the GNU
* General Public License (GPL) Version 2, available from the file
* COPYING in the main directory of this source tree, or the
* OpenIB.org BSD license below:
*
* Redistribution and use in source and binary forms, with or
* without modification, are permitted provided that the following
* conditions are met:
*
* - Redistributions of source code must retain the above
* copyright notice, this list of conditions and the following
* disclaimer.
*
* - Redistributions in binary form must reproduce the above
* copyright notice, this list of conditions and the following
* disclaimer in the documentation and/or other materials
* provided with the distribution.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
* BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
* ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
* CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
* SOFTWARE.
*/
#include <linux/mlx4/cq.h>
#include <linux/mlx4/qp.h>
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-24 16:04:11 +08:00
#include <linux/slab.h>
#include "mlx4_ib.h"
#include "user.h"
static void mlx4_ib_cq_comp(struct mlx4_cq *cq)
{
struct ib_cq *ibcq = &to_mibcq(cq)->ibcq;
ibcq->comp_handler(ibcq, ibcq->cq_context);
}
static void mlx4_ib_cq_event(struct mlx4_cq *cq, enum mlx4_event type)
{
struct ib_event event;
struct ib_cq *ibcq;
if (type != MLX4_EVENT_TYPE_CQ_ERROR) {
pr_warn("Unexpected event type %d "
"on CQ %06x\n", type, cq->cqn);
return;
}
ibcq = &to_mibcq(cq)->ibcq;
if (ibcq->event_handler) {
event.device = ibcq->device;
event.event = IB_EVENT_CQ_ERR;
event.element.cq = ibcq;
ibcq->event_handler(&event, ibcq->cq_context);
}
}
static void *get_cqe_from_buf(struct mlx4_ib_cq_buf *buf, int n)
{
mlx4: 64-byte CQE/EQE support ConnectX-3 devices can use either 64- or 32-byte completion queue entries (CQEs) and event queue entries (EQEs). Using 64-byte EQEs/CQEs performs better because each entry is aligned to a complete cacheline. This patch queries the HCA's capabilities, and if it supports 64-byte CQEs and EQES the driver will configure the HW to work in 64-byte mode. The 32-byte vs 64-byte mode is global per HCA and not per CQ or EQ. Since this mode is global, userspace (libmlx4) must be updated to work with the configured CQE size, and guests using SR-IOV virtual functions need to know both EQE and CQE size. In case one of the 64-byte CQE/EQE capabilities is activated, the patch makes sure that older guest drivers that use the QUERY_DEV_FUNC command (e.g as done in mlx4_core of Linux 3.3..3.6) will notice that they need an update to be able to work with the PPF. This is done by changing the returned pf_context_behaviour not to be zero any more. In case none of these capabilities is activated that value remains zero and older guest drivers can run OK. The SRIOV related flow is as follows 1. the PPF does the detection of the new capabilities using QUERY_DEV_CAP command. 2. the PPF activates the new capabilities using INIT_HCA. 3. the VF detects if the PPF activated the capabilities using QUERY_HCA, and if this is the case activates them for itself too. Note that the VF detects that it must be aware to the new PF behaviour using QUERY_FUNC_CAP. Steps 1 and 2 apply also for native mode. User space notification is done through a new field introduced in struct mlx4_ib_ucontext which holds device capabilities for which user space must take action. This changes the binary interface so the ABI towards libmlx4 exposed through uverbs is bumped from 3 to 4 but only when **needed** i.e. only when the driver does use 64-byte CQEs or future device capabilities which must be in sync by user space. This practice allows to work with unmodified libmlx4 on older devices (e.g A0, B0) which don't support 64-byte CQEs. In order to keep existing systems functional when they update to a newer kernel that contains these changes in VF and userspace ABI, a module parameter enable_64b_cqe_eqe must be set to enable 64-byte mode; the default is currently false. Signed-off-by: Eli Cohen <eli@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-10-21 22:59:24 +08:00
return mlx4_buf_offset(&buf->buf, n * buf->entry_size);
}
static void *get_cqe(struct mlx4_ib_cq *cq, int n)
{
return get_cqe_from_buf(&cq->buf, n);
}
static void *get_sw_cqe(struct mlx4_ib_cq *cq, int n)
{
struct mlx4_cqe *cqe = get_cqe(cq, n & cq->ibcq.cqe);
mlx4: 64-byte CQE/EQE support ConnectX-3 devices can use either 64- or 32-byte completion queue entries (CQEs) and event queue entries (EQEs). Using 64-byte EQEs/CQEs performs better because each entry is aligned to a complete cacheline. This patch queries the HCA's capabilities, and if it supports 64-byte CQEs and EQES the driver will configure the HW to work in 64-byte mode. The 32-byte vs 64-byte mode is global per HCA and not per CQ or EQ. Since this mode is global, userspace (libmlx4) must be updated to work with the configured CQE size, and guests using SR-IOV virtual functions need to know both EQE and CQE size. In case one of the 64-byte CQE/EQE capabilities is activated, the patch makes sure that older guest drivers that use the QUERY_DEV_FUNC command (e.g as done in mlx4_core of Linux 3.3..3.6) will notice that they need an update to be able to work with the PPF. This is done by changing the returned pf_context_behaviour not to be zero any more. In case none of these capabilities is activated that value remains zero and older guest drivers can run OK. The SRIOV related flow is as follows 1. the PPF does the detection of the new capabilities using QUERY_DEV_CAP command. 2. the PPF activates the new capabilities using INIT_HCA. 3. the VF detects if the PPF activated the capabilities using QUERY_HCA, and if this is the case activates them for itself too. Note that the VF detects that it must be aware to the new PF behaviour using QUERY_FUNC_CAP. Steps 1 and 2 apply also for native mode. User space notification is done through a new field introduced in struct mlx4_ib_ucontext which holds device capabilities for which user space must take action. This changes the binary interface so the ABI towards libmlx4 exposed through uverbs is bumped from 3 to 4 but only when **needed** i.e. only when the driver does use 64-byte CQEs or future device capabilities which must be in sync by user space. This practice allows to work with unmodified libmlx4 on older devices (e.g A0, B0) which don't support 64-byte CQEs. In order to keep existing systems functional when they update to a newer kernel that contains these changes in VF and userspace ABI, a module parameter enable_64b_cqe_eqe must be set to enable 64-byte mode; the default is currently false. Signed-off-by: Eli Cohen <eli@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-10-21 22:59:24 +08:00
struct mlx4_cqe *tcqe = ((cq->buf.entry_size == 64) ? (cqe + 1) : cqe);
mlx4: 64-byte CQE/EQE support ConnectX-3 devices can use either 64- or 32-byte completion queue entries (CQEs) and event queue entries (EQEs). Using 64-byte EQEs/CQEs performs better because each entry is aligned to a complete cacheline. This patch queries the HCA's capabilities, and if it supports 64-byte CQEs and EQES the driver will configure the HW to work in 64-byte mode. The 32-byte vs 64-byte mode is global per HCA and not per CQ or EQ. Since this mode is global, userspace (libmlx4) must be updated to work with the configured CQE size, and guests using SR-IOV virtual functions need to know both EQE and CQE size. In case one of the 64-byte CQE/EQE capabilities is activated, the patch makes sure that older guest drivers that use the QUERY_DEV_FUNC command (e.g as done in mlx4_core of Linux 3.3..3.6) will notice that they need an update to be able to work with the PPF. This is done by changing the returned pf_context_behaviour not to be zero any more. In case none of these capabilities is activated that value remains zero and older guest drivers can run OK. The SRIOV related flow is as follows 1. the PPF does the detection of the new capabilities using QUERY_DEV_CAP command. 2. the PPF activates the new capabilities using INIT_HCA. 3. the VF detects if the PPF activated the capabilities using QUERY_HCA, and if this is the case activates them for itself too. Note that the VF detects that it must be aware to the new PF behaviour using QUERY_FUNC_CAP. Steps 1 and 2 apply also for native mode. User space notification is done through a new field introduced in struct mlx4_ib_ucontext which holds device capabilities for which user space must take action. This changes the binary interface so the ABI towards libmlx4 exposed through uverbs is bumped from 3 to 4 but only when **needed** i.e. only when the driver does use 64-byte CQEs or future device capabilities which must be in sync by user space. This practice allows to work with unmodified libmlx4 on older devices (e.g A0, B0) which don't support 64-byte CQEs. In order to keep existing systems functional when they update to a newer kernel that contains these changes in VF and userspace ABI, a module parameter enable_64b_cqe_eqe must be set to enable 64-byte mode; the default is currently false. Signed-off-by: Eli Cohen <eli@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-10-21 22:59:24 +08:00
return (!!(tcqe->owner_sr_opcode & MLX4_CQE_OWNER_MASK) ^
!!(n & (cq->ibcq.cqe + 1))) ? NULL : cqe;
}
static struct mlx4_cqe *next_cqe_sw(struct mlx4_ib_cq *cq)
{
return get_sw_cqe(cq, cq->mcq.cons_index);
}
int mlx4_ib_modify_cq(struct ib_cq *cq, u16 cq_count, u16 cq_period)
{
struct mlx4_ib_cq *mcq = to_mcq(cq);
struct mlx4_ib_dev *dev = to_mdev(cq->device);
return mlx4_cq_modify(dev->dev, &mcq->mcq, cq_count, cq_period);
}
static int mlx4_ib_alloc_cq_buf(struct mlx4_ib_dev *dev, struct mlx4_ib_cq_buf *buf, int nent)
{
int err;
mlx4: 64-byte CQE/EQE support ConnectX-3 devices can use either 64- or 32-byte completion queue entries (CQEs) and event queue entries (EQEs). Using 64-byte EQEs/CQEs performs better because each entry is aligned to a complete cacheline. This patch queries the HCA's capabilities, and if it supports 64-byte CQEs and EQES the driver will configure the HW to work in 64-byte mode. The 32-byte vs 64-byte mode is global per HCA and not per CQ or EQ. Since this mode is global, userspace (libmlx4) must be updated to work with the configured CQE size, and guests using SR-IOV virtual functions need to know both EQE and CQE size. In case one of the 64-byte CQE/EQE capabilities is activated, the patch makes sure that older guest drivers that use the QUERY_DEV_FUNC command (e.g as done in mlx4_core of Linux 3.3..3.6) will notice that they need an update to be able to work with the PPF. This is done by changing the returned pf_context_behaviour not to be zero any more. In case none of these capabilities is activated that value remains zero and older guest drivers can run OK. The SRIOV related flow is as follows 1. the PPF does the detection of the new capabilities using QUERY_DEV_CAP command. 2. the PPF activates the new capabilities using INIT_HCA. 3. the VF detects if the PPF activated the capabilities using QUERY_HCA, and if this is the case activates them for itself too. Note that the VF detects that it must be aware to the new PF behaviour using QUERY_FUNC_CAP. Steps 1 and 2 apply also for native mode. User space notification is done through a new field introduced in struct mlx4_ib_ucontext which holds device capabilities for which user space must take action. This changes the binary interface so the ABI towards libmlx4 exposed through uverbs is bumped from 3 to 4 but only when **needed** i.e. only when the driver does use 64-byte CQEs or future device capabilities which must be in sync by user space. This practice allows to work with unmodified libmlx4 on older devices (e.g A0, B0) which don't support 64-byte CQEs. In order to keep existing systems functional when they update to a newer kernel that contains these changes in VF and userspace ABI, a module parameter enable_64b_cqe_eqe must be set to enable 64-byte mode; the default is currently false. Signed-off-by: Eli Cohen <eli@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-10-21 22:59:24 +08:00
err = mlx4_buf_alloc(dev->dev, nent * dev->dev->caps.cqe_size,
PAGE_SIZE * 2, &buf->buf);
if (err)
goto out;
mlx4: 64-byte CQE/EQE support ConnectX-3 devices can use either 64- or 32-byte completion queue entries (CQEs) and event queue entries (EQEs). Using 64-byte EQEs/CQEs performs better because each entry is aligned to a complete cacheline. This patch queries the HCA's capabilities, and if it supports 64-byte CQEs and EQES the driver will configure the HW to work in 64-byte mode. The 32-byte vs 64-byte mode is global per HCA and not per CQ or EQ. Since this mode is global, userspace (libmlx4) must be updated to work with the configured CQE size, and guests using SR-IOV virtual functions need to know both EQE and CQE size. In case one of the 64-byte CQE/EQE capabilities is activated, the patch makes sure that older guest drivers that use the QUERY_DEV_FUNC command (e.g as done in mlx4_core of Linux 3.3..3.6) will notice that they need an update to be able to work with the PPF. This is done by changing the returned pf_context_behaviour not to be zero any more. In case none of these capabilities is activated that value remains zero and older guest drivers can run OK. The SRIOV related flow is as follows 1. the PPF does the detection of the new capabilities using QUERY_DEV_CAP command. 2. the PPF activates the new capabilities using INIT_HCA. 3. the VF detects if the PPF activated the capabilities using QUERY_HCA, and if this is the case activates them for itself too. Note that the VF detects that it must be aware to the new PF behaviour using QUERY_FUNC_CAP. Steps 1 and 2 apply also for native mode. User space notification is done through a new field introduced in struct mlx4_ib_ucontext which holds device capabilities for which user space must take action. This changes the binary interface so the ABI towards libmlx4 exposed through uverbs is bumped from 3 to 4 but only when **needed** i.e. only when the driver does use 64-byte CQEs or future device capabilities which must be in sync by user space. This practice allows to work with unmodified libmlx4 on older devices (e.g A0, B0) which don't support 64-byte CQEs. In order to keep existing systems functional when they update to a newer kernel that contains these changes in VF and userspace ABI, a module parameter enable_64b_cqe_eqe must be set to enable 64-byte mode; the default is currently false. Signed-off-by: Eli Cohen <eli@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-10-21 22:59:24 +08:00
buf->entry_size = dev->dev->caps.cqe_size;
err = mlx4_mtt_init(dev->dev, buf->buf.npages, buf->buf.page_shift,
&buf->mtt);
if (err)
goto err_buf;
err = mlx4_buf_write_mtt(dev->dev, &buf->mtt, &buf->buf);
if (err)
goto err_mtt;
return 0;
err_mtt:
mlx4_mtt_cleanup(dev->dev, &buf->mtt);
err_buf:
mlx4: 64-byte CQE/EQE support ConnectX-3 devices can use either 64- or 32-byte completion queue entries (CQEs) and event queue entries (EQEs). Using 64-byte EQEs/CQEs performs better because each entry is aligned to a complete cacheline. This patch queries the HCA's capabilities, and if it supports 64-byte CQEs and EQES the driver will configure the HW to work in 64-byte mode. The 32-byte vs 64-byte mode is global per HCA and not per CQ or EQ. Since this mode is global, userspace (libmlx4) must be updated to work with the configured CQE size, and guests using SR-IOV virtual functions need to know both EQE and CQE size. In case one of the 64-byte CQE/EQE capabilities is activated, the patch makes sure that older guest drivers that use the QUERY_DEV_FUNC command (e.g as done in mlx4_core of Linux 3.3..3.6) will notice that they need an update to be able to work with the PPF. This is done by changing the returned pf_context_behaviour not to be zero any more. In case none of these capabilities is activated that value remains zero and older guest drivers can run OK. The SRIOV related flow is as follows 1. the PPF does the detection of the new capabilities using QUERY_DEV_CAP command. 2. the PPF activates the new capabilities using INIT_HCA. 3. the VF detects if the PPF activated the capabilities using QUERY_HCA, and if this is the case activates them for itself too. Note that the VF detects that it must be aware to the new PF behaviour using QUERY_FUNC_CAP. Steps 1 and 2 apply also for native mode. User space notification is done through a new field introduced in struct mlx4_ib_ucontext which holds device capabilities for which user space must take action. This changes the binary interface so the ABI towards libmlx4 exposed through uverbs is bumped from 3 to 4 but only when **needed** i.e. only when the driver does use 64-byte CQEs or future device capabilities which must be in sync by user space. This practice allows to work with unmodified libmlx4 on older devices (e.g A0, B0) which don't support 64-byte CQEs. In order to keep existing systems functional when they update to a newer kernel that contains these changes in VF and userspace ABI, a module parameter enable_64b_cqe_eqe must be set to enable 64-byte mode; the default is currently false. Signed-off-by: Eli Cohen <eli@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-10-21 22:59:24 +08:00
mlx4_buf_free(dev->dev, nent * buf->entry_size, &buf->buf);
out:
return err;
}
static void mlx4_ib_free_cq_buf(struct mlx4_ib_dev *dev, struct mlx4_ib_cq_buf *buf, int cqe)
{
mlx4: 64-byte CQE/EQE support ConnectX-3 devices can use either 64- or 32-byte completion queue entries (CQEs) and event queue entries (EQEs). Using 64-byte EQEs/CQEs performs better because each entry is aligned to a complete cacheline. This patch queries the HCA's capabilities, and if it supports 64-byte CQEs and EQES the driver will configure the HW to work in 64-byte mode. The 32-byte vs 64-byte mode is global per HCA and not per CQ or EQ. Since this mode is global, userspace (libmlx4) must be updated to work with the configured CQE size, and guests using SR-IOV virtual functions need to know both EQE and CQE size. In case one of the 64-byte CQE/EQE capabilities is activated, the patch makes sure that older guest drivers that use the QUERY_DEV_FUNC command (e.g as done in mlx4_core of Linux 3.3..3.6) will notice that they need an update to be able to work with the PPF. This is done by changing the returned pf_context_behaviour not to be zero any more. In case none of these capabilities is activated that value remains zero and older guest drivers can run OK. The SRIOV related flow is as follows 1. the PPF does the detection of the new capabilities using QUERY_DEV_CAP command. 2. the PPF activates the new capabilities using INIT_HCA. 3. the VF detects if the PPF activated the capabilities using QUERY_HCA, and if this is the case activates them for itself too. Note that the VF detects that it must be aware to the new PF behaviour using QUERY_FUNC_CAP. Steps 1 and 2 apply also for native mode. User space notification is done through a new field introduced in struct mlx4_ib_ucontext which holds device capabilities for which user space must take action. This changes the binary interface so the ABI towards libmlx4 exposed through uverbs is bumped from 3 to 4 but only when **needed** i.e. only when the driver does use 64-byte CQEs or future device capabilities which must be in sync by user space. This practice allows to work with unmodified libmlx4 on older devices (e.g A0, B0) which don't support 64-byte CQEs. In order to keep existing systems functional when they update to a newer kernel that contains these changes in VF and userspace ABI, a module parameter enable_64b_cqe_eqe must be set to enable 64-byte mode; the default is currently false. Signed-off-by: Eli Cohen <eli@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-10-21 22:59:24 +08:00
mlx4_buf_free(dev->dev, (cqe + 1) * buf->entry_size, &buf->buf);
}
static int mlx4_ib_get_cq_umem(struct mlx4_ib_dev *dev, struct ib_ucontext *context,
struct mlx4_ib_cq_buf *buf, struct ib_umem **umem,
u64 buf_addr, int cqe)
{
int err;
mlx4: 64-byte CQE/EQE support ConnectX-3 devices can use either 64- or 32-byte completion queue entries (CQEs) and event queue entries (EQEs). Using 64-byte EQEs/CQEs performs better because each entry is aligned to a complete cacheline. This patch queries the HCA's capabilities, and if it supports 64-byte CQEs and EQES the driver will configure the HW to work in 64-byte mode. The 32-byte vs 64-byte mode is global per HCA and not per CQ or EQ. Since this mode is global, userspace (libmlx4) must be updated to work with the configured CQE size, and guests using SR-IOV virtual functions need to know both EQE and CQE size. In case one of the 64-byte CQE/EQE capabilities is activated, the patch makes sure that older guest drivers that use the QUERY_DEV_FUNC command (e.g as done in mlx4_core of Linux 3.3..3.6) will notice that they need an update to be able to work with the PPF. This is done by changing the returned pf_context_behaviour not to be zero any more. In case none of these capabilities is activated that value remains zero and older guest drivers can run OK. The SRIOV related flow is as follows 1. the PPF does the detection of the new capabilities using QUERY_DEV_CAP command. 2. the PPF activates the new capabilities using INIT_HCA. 3. the VF detects if the PPF activated the capabilities using QUERY_HCA, and if this is the case activates them for itself too. Note that the VF detects that it must be aware to the new PF behaviour using QUERY_FUNC_CAP. Steps 1 and 2 apply also for native mode. User space notification is done through a new field introduced in struct mlx4_ib_ucontext which holds device capabilities for which user space must take action. This changes the binary interface so the ABI towards libmlx4 exposed through uverbs is bumped from 3 to 4 but only when **needed** i.e. only when the driver does use 64-byte CQEs or future device capabilities which must be in sync by user space. This practice allows to work with unmodified libmlx4 on older devices (e.g A0, B0) which don't support 64-byte CQEs. In order to keep existing systems functional when they update to a newer kernel that contains these changes in VF and userspace ABI, a module parameter enable_64b_cqe_eqe must be set to enable 64-byte mode; the default is currently false. Signed-off-by: Eli Cohen <eli@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-10-21 22:59:24 +08:00
int cqe_size = dev->dev->caps.cqe_size;
mlx4: 64-byte CQE/EQE support ConnectX-3 devices can use either 64- or 32-byte completion queue entries (CQEs) and event queue entries (EQEs). Using 64-byte EQEs/CQEs performs better because each entry is aligned to a complete cacheline. This patch queries the HCA's capabilities, and if it supports 64-byte CQEs and EQES the driver will configure the HW to work in 64-byte mode. The 32-byte vs 64-byte mode is global per HCA and not per CQ or EQ. Since this mode is global, userspace (libmlx4) must be updated to work with the configured CQE size, and guests using SR-IOV virtual functions need to know both EQE and CQE size. In case one of the 64-byte CQE/EQE capabilities is activated, the patch makes sure that older guest drivers that use the QUERY_DEV_FUNC command (e.g as done in mlx4_core of Linux 3.3..3.6) will notice that they need an update to be able to work with the PPF. This is done by changing the returned pf_context_behaviour not to be zero any more. In case none of these capabilities is activated that value remains zero and older guest drivers can run OK. The SRIOV related flow is as follows 1. the PPF does the detection of the new capabilities using QUERY_DEV_CAP command. 2. the PPF activates the new capabilities using INIT_HCA. 3. the VF detects if the PPF activated the capabilities using QUERY_HCA, and if this is the case activates them for itself too. Note that the VF detects that it must be aware to the new PF behaviour using QUERY_FUNC_CAP. Steps 1 and 2 apply also for native mode. User space notification is done through a new field introduced in struct mlx4_ib_ucontext which holds device capabilities for which user space must take action. This changes the binary interface so the ABI towards libmlx4 exposed through uverbs is bumped from 3 to 4 but only when **needed** i.e. only when the driver does use 64-byte CQEs or future device capabilities which must be in sync by user space. This practice allows to work with unmodified libmlx4 on older devices (e.g A0, B0) which don't support 64-byte CQEs. In order to keep existing systems functional when they update to a newer kernel that contains these changes in VF and userspace ABI, a module parameter enable_64b_cqe_eqe must be set to enable 64-byte mode; the default is currently false. Signed-off-by: Eli Cohen <eli@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-10-21 22:59:24 +08:00
*umem = ib_umem_get(context, buf_addr, cqe * cqe_size,
IB_ACCESS_LOCAL_WRITE, 1);
if (IS_ERR(*umem))
return PTR_ERR(*umem);
err = mlx4_mtt_init(dev->dev, ib_umem_page_count(*umem),
ilog2((*umem)->page_size), &buf->mtt);
if (err)
goto err_buf;
err = mlx4_ib_umem_write_mtt(dev, &buf->mtt, *umem);
if (err)
goto err_mtt;
return 0;
err_mtt:
mlx4_mtt_cleanup(dev->dev, &buf->mtt);
err_buf:
ib_umem_release(*umem);
return err;
}
struct ib_cq *mlx4_ib_create_cq(struct ib_device *ibdev, int entries, int vector,
struct ib_ucontext *context,
struct ib_udata *udata)
{
struct mlx4_ib_dev *dev = to_mdev(ibdev);
struct mlx4_ib_cq *cq;
struct mlx4_uar *uar;
int err;
if (entries < 1 || entries > dev->dev->caps.max_cqes)
return ERR_PTR(-EINVAL);
cq = kmalloc(sizeof *cq, GFP_KERNEL);
if (!cq)
return ERR_PTR(-ENOMEM);
entries = roundup_pow_of_two(entries + 1);
cq->ibcq.cqe = entries - 1;
mutex_init(&cq->resize_mutex);
spin_lock_init(&cq->lock);
cq->resize_buf = NULL;
cq->resize_umem = NULL;
if (context) {
struct mlx4_ib_create_cq ucmd;
if (ib_copy_from_udata(&ucmd, udata, sizeof ucmd)) {
err = -EFAULT;
goto err_cq;
}
err = mlx4_ib_get_cq_umem(dev, context, &cq->buf, &cq->umem,
ucmd.buf_addr, entries);
if (err)
goto err_cq;
err = mlx4_ib_db_map_user(to_mucontext(context), ucmd.db_addr,
&cq->db);
if (err)
goto err_mtt;
uar = &to_mucontext(context)->uar;
} else {
err = mlx4_db_alloc(dev->dev, &cq->db, 1);
if (err)
goto err_cq;
cq->mcq.set_ci_db = cq->db.db;
cq->mcq.arm_db = cq->db.db + 1;
*cq->mcq.set_ci_db = 0;
*cq->mcq.arm_db = 0;
err = mlx4_ib_alloc_cq_buf(dev, &cq->buf, entries);
if (err)
goto err_db;
uar = &dev->priv_uar;
}
if (dev->eq_table)
vector = dev->eq_table[vector % ibdev->num_comp_vectors];
err = mlx4_cq_alloc(dev->dev, entries, &cq->buf.mtt, uar,
cq->db.dma, &cq->mcq, vector, 0);
if (err)
goto err_dbmap;
cq->mcq.comp = mlx4_ib_cq_comp;
cq->mcq.event = mlx4_ib_cq_event;
if (context)
if (ib_copy_to_udata(udata, &cq->mcq.cqn, sizeof (__u32))) {
err = -EFAULT;
goto err_dbmap;
}
return &cq->ibcq;
err_dbmap:
if (context)
mlx4_ib_db_unmap_user(to_mucontext(context), &cq->db);
err_mtt:
mlx4_mtt_cleanup(dev->dev, &cq->buf.mtt);
if (context)
ib_umem_release(cq->umem);
else
mlx4_ib_free_cq_buf(dev, &cq->buf, cq->ibcq.cqe);
err_db:
if (!context)
mlx4_db_free(dev->dev, &cq->db);
err_cq:
kfree(cq);
return ERR_PTR(err);
}
static int mlx4_alloc_resize_buf(struct mlx4_ib_dev *dev, struct mlx4_ib_cq *cq,
int entries)
{
int err;
if (cq->resize_buf)
return -EBUSY;
cq->resize_buf = kmalloc(sizeof *cq->resize_buf, GFP_ATOMIC);
if (!cq->resize_buf)
return -ENOMEM;
err = mlx4_ib_alloc_cq_buf(dev, &cq->resize_buf->buf, entries);
if (err) {
kfree(cq->resize_buf);
cq->resize_buf = NULL;
return err;
}
cq->resize_buf->cqe = entries - 1;
return 0;
}
static int mlx4_alloc_resize_umem(struct mlx4_ib_dev *dev, struct mlx4_ib_cq *cq,
int entries, struct ib_udata *udata)
{
struct mlx4_ib_resize_cq ucmd;
int err;
if (cq->resize_umem)
return -EBUSY;
if (ib_copy_from_udata(&ucmd, udata, sizeof ucmd))
return -EFAULT;
cq->resize_buf = kmalloc(sizeof *cq->resize_buf, GFP_ATOMIC);
if (!cq->resize_buf)
return -ENOMEM;
err = mlx4_ib_get_cq_umem(dev, cq->umem->context, &cq->resize_buf->buf,
&cq->resize_umem, ucmd.buf_addr, entries);
if (err) {
kfree(cq->resize_buf);
cq->resize_buf = NULL;
return err;
}
cq->resize_buf->cqe = entries - 1;
return 0;
}
static int mlx4_ib_get_outstanding_cqes(struct mlx4_ib_cq *cq)
{
u32 i;
i = cq->mcq.cons_index;
while (get_sw_cqe(cq, i & cq->ibcq.cqe))
++i;
return i - cq->mcq.cons_index;
}
static void mlx4_ib_cq_resize_copy_cqes(struct mlx4_ib_cq *cq)
{
struct mlx4_cqe *cqe, *new_cqe;
int i;
mlx4: 64-byte CQE/EQE support ConnectX-3 devices can use either 64- or 32-byte completion queue entries (CQEs) and event queue entries (EQEs). Using 64-byte EQEs/CQEs performs better because each entry is aligned to a complete cacheline. This patch queries the HCA's capabilities, and if it supports 64-byte CQEs and EQES the driver will configure the HW to work in 64-byte mode. The 32-byte vs 64-byte mode is global per HCA and not per CQ or EQ. Since this mode is global, userspace (libmlx4) must be updated to work with the configured CQE size, and guests using SR-IOV virtual functions need to know both EQE and CQE size. In case one of the 64-byte CQE/EQE capabilities is activated, the patch makes sure that older guest drivers that use the QUERY_DEV_FUNC command (e.g as done in mlx4_core of Linux 3.3..3.6) will notice that they need an update to be able to work with the PPF. This is done by changing the returned pf_context_behaviour not to be zero any more. In case none of these capabilities is activated that value remains zero and older guest drivers can run OK. The SRIOV related flow is as follows 1. the PPF does the detection of the new capabilities using QUERY_DEV_CAP command. 2. the PPF activates the new capabilities using INIT_HCA. 3. the VF detects if the PPF activated the capabilities using QUERY_HCA, and if this is the case activates them for itself too. Note that the VF detects that it must be aware to the new PF behaviour using QUERY_FUNC_CAP. Steps 1 and 2 apply also for native mode. User space notification is done through a new field introduced in struct mlx4_ib_ucontext which holds device capabilities for which user space must take action. This changes the binary interface so the ABI towards libmlx4 exposed through uverbs is bumped from 3 to 4 but only when **needed** i.e. only when the driver does use 64-byte CQEs or future device capabilities which must be in sync by user space. This practice allows to work with unmodified libmlx4 on older devices (e.g A0, B0) which don't support 64-byte CQEs. In order to keep existing systems functional when they update to a newer kernel that contains these changes in VF and userspace ABI, a module parameter enable_64b_cqe_eqe must be set to enable 64-byte mode; the default is currently false. Signed-off-by: Eli Cohen <eli@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-10-21 22:59:24 +08:00
int cqe_size = cq->buf.entry_size;
int cqe_inc = cqe_size == 64 ? 1 : 0;
i = cq->mcq.cons_index;
cqe = get_cqe(cq, i & cq->ibcq.cqe);
mlx4: 64-byte CQE/EQE support ConnectX-3 devices can use either 64- or 32-byte completion queue entries (CQEs) and event queue entries (EQEs). Using 64-byte EQEs/CQEs performs better because each entry is aligned to a complete cacheline. This patch queries the HCA's capabilities, and if it supports 64-byte CQEs and EQES the driver will configure the HW to work in 64-byte mode. The 32-byte vs 64-byte mode is global per HCA and not per CQ or EQ. Since this mode is global, userspace (libmlx4) must be updated to work with the configured CQE size, and guests using SR-IOV virtual functions need to know both EQE and CQE size. In case one of the 64-byte CQE/EQE capabilities is activated, the patch makes sure that older guest drivers that use the QUERY_DEV_FUNC command (e.g as done in mlx4_core of Linux 3.3..3.6) will notice that they need an update to be able to work with the PPF. This is done by changing the returned pf_context_behaviour not to be zero any more. In case none of these capabilities is activated that value remains zero and older guest drivers can run OK. The SRIOV related flow is as follows 1. the PPF does the detection of the new capabilities using QUERY_DEV_CAP command. 2. the PPF activates the new capabilities using INIT_HCA. 3. the VF detects if the PPF activated the capabilities using QUERY_HCA, and if this is the case activates them for itself too. Note that the VF detects that it must be aware to the new PF behaviour using QUERY_FUNC_CAP. Steps 1 and 2 apply also for native mode. User space notification is done through a new field introduced in struct mlx4_ib_ucontext which holds device capabilities for which user space must take action. This changes the binary interface so the ABI towards libmlx4 exposed through uverbs is bumped from 3 to 4 but only when **needed** i.e. only when the driver does use 64-byte CQEs or future device capabilities which must be in sync by user space. This practice allows to work with unmodified libmlx4 on older devices (e.g A0, B0) which don't support 64-byte CQEs. In order to keep existing systems functional when they update to a newer kernel that contains these changes in VF and userspace ABI, a module parameter enable_64b_cqe_eqe must be set to enable 64-byte mode; the default is currently false. Signed-off-by: Eli Cohen <eli@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-10-21 22:59:24 +08:00
cqe += cqe_inc;
while ((cqe->owner_sr_opcode & MLX4_CQE_OPCODE_MASK) != MLX4_CQE_OPCODE_RESIZE) {
new_cqe = get_cqe_from_buf(&cq->resize_buf->buf,
(i + 1) & cq->resize_buf->cqe);
mlx4: 64-byte CQE/EQE support ConnectX-3 devices can use either 64- or 32-byte completion queue entries (CQEs) and event queue entries (EQEs). Using 64-byte EQEs/CQEs performs better because each entry is aligned to a complete cacheline. This patch queries the HCA's capabilities, and if it supports 64-byte CQEs and EQES the driver will configure the HW to work in 64-byte mode. The 32-byte vs 64-byte mode is global per HCA and not per CQ or EQ. Since this mode is global, userspace (libmlx4) must be updated to work with the configured CQE size, and guests using SR-IOV virtual functions need to know both EQE and CQE size. In case one of the 64-byte CQE/EQE capabilities is activated, the patch makes sure that older guest drivers that use the QUERY_DEV_FUNC command (e.g as done in mlx4_core of Linux 3.3..3.6) will notice that they need an update to be able to work with the PPF. This is done by changing the returned pf_context_behaviour not to be zero any more. In case none of these capabilities is activated that value remains zero and older guest drivers can run OK. The SRIOV related flow is as follows 1. the PPF does the detection of the new capabilities using QUERY_DEV_CAP command. 2. the PPF activates the new capabilities using INIT_HCA. 3. the VF detects if the PPF activated the capabilities using QUERY_HCA, and if this is the case activates them for itself too. Note that the VF detects that it must be aware to the new PF behaviour using QUERY_FUNC_CAP. Steps 1 and 2 apply also for native mode. User space notification is done through a new field introduced in struct mlx4_ib_ucontext which holds device capabilities for which user space must take action. This changes the binary interface so the ABI towards libmlx4 exposed through uverbs is bumped from 3 to 4 but only when **needed** i.e. only when the driver does use 64-byte CQEs or future device capabilities which must be in sync by user space. This practice allows to work with unmodified libmlx4 on older devices (e.g A0, B0) which don't support 64-byte CQEs. In order to keep existing systems functional when they update to a newer kernel that contains these changes in VF and userspace ABI, a module parameter enable_64b_cqe_eqe must be set to enable 64-byte mode; the default is currently false. Signed-off-by: Eli Cohen <eli@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-10-21 22:59:24 +08:00
memcpy(new_cqe, get_cqe(cq, i & cq->ibcq.cqe), cqe_size);
new_cqe += cqe_inc;
new_cqe->owner_sr_opcode = (cqe->owner_sr_opcode & ~MLX4_CQE_OWNER_MASK) |
(((i + 1) & (cq->resize_buf->cqe + 1)) ? MLX4_CQE_OWNER_MASK : 0);
cqe = get_cqe(cq, ++i & cq->ibcq.cqe);
mlx4: 64-byte CQE/EQE support ConnectX-3 devices can use either 64- or 32-byte completion queue entries (CQEs) and event queue entries (EQEs). Using 64-byte EQEs/CQEs performs better because each entry is aligned to a complete cacheline. This patch queries the HCA's capabilities, and if it supports 64-byte CQEs and EQES the driver will configure the HW to work in 64-byte mode. The 32-byte vs 64-byte mode is global per HCA and not per CQ or EQ. Since this mode is global, userspace (libmlx4) must be updated to work with the configured CQE size, and guests using SR-IOV virtual functions need to know both EQE and CQE size. In case one of the 64-byte CQE/EQE capabilities is activated, the patch makes sure that older guest drivers that use the QUERY_DEV_FUNC command (e.g as done in mlx4_core of Linux 3.3..3.6) will notice that they need an update to be able to work with the PPF. This is done by changing the returned pf_context_behaviour not to be zero any more. In case none of these capabilities is activated that value remains zero and older guest drivers can run OK. The SRIOV related flow is as follows 1. the PPF does the detection of the new capabilities using QUERY_DEV_CAP command. 2. the PPF activates the new capabilities using INIT_HCA. 3. the VF detects if the PPF activated the capabilities using QUERY_HCA, and if this is the case activates them for itself too. Note that the VF detects that it must be aware to the new PF behaviour using QUERY_FUNC_CAP. Steps 1 and 2 apply also for native mode. User space notification is done through a new field introduced in struct mlx4_ib_ucontext which holds device capabilities for which user space must take action. This changes the binary interface so the ABI towards libmlx4 exposed through uverbs is bumped from 3 to 4 but only when **needed** i.e. only when the driver does use 64-byte CQEs or future device capabilities which must be in sync by user space. This practice allows to work with unmodified libmlx4 on older devices (e.g A0, B0) which don't support 64-byte CQEs. In order to keep existing systems functional when they update to a newer kernel that contains these changes in VF and userspace ABI, a module parameter enable_64b_cqe_eqe must be set to enable 64-byte mode; the default is currently false. Signed-off-by: Eli Cohen <eli@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-10-21 22:59:24 +08:00
cqe += cqe_inc;
}
++cq->mcq.cons_index;
}
int mlx4_ib_resize_cq(struct ib_cq *ibcq, int entries, struct ib_udata *udata)
{
struct mlx4_ib_dev *dev = to_mdev(ibcq->device);
struct mlx4_ib_cq *cq = to_mcq(ibcq);
struct mlx4_mtt mtt;
int outst_cqe;
int err;
mutex_lock(&cq->resize_mutex);
if (entries < 1 || entries > dev->dev->caps.max_cqes) {
err = -EINVAL;
goto out;
}
entries = roundup_pow_of_two(entries + 1);
if (entries == ibcq->cqe + 1) {
err = 0;
goto out;
}
if (ibcq->uobject) {
err = mlx4_alloc_resize_umem(dev, cq, entries, udata);
if (err)
goto out;
} else {
/* Can't be smaller than the number of outstanding CQEs */
outst_cqe = mlx4_ib_get_outstanding_cqes(cq);
if (entries < outst_cqe + 1) {
err = 0;
goto out;
}
err = mlx4_alloc_resize_buf(dev, cq, entries);
if (err)
goto out;
}
mtt = cq->buf.mtt;
err = mlx4_cq_resize(dev->dev, &cq->mcq, entries, &cq->resize_buf->buf.mtt);
if (err)
goto err_buf;
mlx4_mtt_cleanup(dev->dev, &mtt);
if (ibcq->uobject) {
cq->buf = cq->resize_buf->buf;
cq->ibcq.cqe = cq->resize_buf->cqe;
ib_umem_release(cq->umem);
cq->umem = cq->resize_umem;
kfree(cq->resize_buf);
cq->resize_buf = NULL;
cq->resize_umem = NULL;
} else {
struct mlx4_ib_cq_buf tmp_buf;
int tmp_cqe = 0;
spin_lock_irq(&cq->lock);
if (cq->resize_buf) {
mlx4_ib_cq_resize_copy_cqes(cq);
tmp_buf = cq->buf;
tmp_cqe = cq->ibcq.cqe;
cq->buf = cq->resize_buf->buf;
cq->ibcq.cqe = cq->resize_buf->cqe;
kfree(cq->resize_buf);
cq->resize_buf = NULL;
}
spin_unlock_irq(&cq->lock);
if (tmp_cqe)
mlx4_ib_free_cq_buf(dev, &tmp_buf, tmp_cqe);
}
goto out;
err_buf:
mlx4_mtt_cleanup(dev->dev, &cq->resize_buf->buf.mtt);
if (!ibcq->uobject)
mlx4_ib_free_cq_buf(dev, &cq->resize_buf->buf,
cq->resize_buf->cqe);
kfree(cq->resize_buf);
cq->resize_buf = NULL;
if (cq->resize_umem) {
ib_umem_release(cq->resize_umem);
cq->resize_umem = NULL;
}
out:
mutex_unlock(&cq->resize_mutex);
mlx4: 64-byte CQE/EQE support ConnectX-3 devices can use either 64- or 32-byte completion queue entries (CQEs) and event queue entries (EQEs). Using 64-byte EQEs/CQEs performs better because each entry is aligned to a complete cacheline. This patch queries the HCA's capabilities, and if it supports 64-byte CQEs and EQES the driver will configure the HW to work in 64-byte mode. The 32-byte vs 64-byte mode is global per HCA and not per CQ or EQ. Since this mode is global, userspace (libmlx4) must be updated to work with the configured CQE size, and guests using SR-IOV virtual functions need to know both EQE and CQE size. In case one of the 64-byte CQE/EQE capabilities is activated, the patch makes sure that older guest drivers that use the QUERY_DEV_FUNC command (e.g as done in mlx4_core of Linux 3.3..3.6) will notice that they need an update to be able to work with the PPF. This is done by changing the returned pf_context_behaviour not to be zero any more. In case none of these capabilities is activated that value remains zero and older guest drivers can run OK. The SRIOV related flow is as follows 1. the PPF does the detection of the new capabilities using QUERY_DEV_CAP command. 2. the PPF activates the new capabilities using INIT_HCA. 3. the VF detects if the PPF activated the capabilities using QUERY_HCA, and if this is the case activates them for itself too. Note that the VF detects that it must be aware to the new PF behaviour using QUERY_FUNC_CAP. Steps 1 and 2 apply also for native mode. User space notification is done through a new field introduced in struct mlx4_ib_ucontext which holds device capabilities for which user space must take action. This changes the binary interface so the ABI towards libmlx4 exposed through uverbs is bumped from 3 to 4 but only when **needed** i.e. only when the driver does use 64-byte CQEs or future device capabilities which must be in sync by user space. This practice allows to work with unmodified libmlx4 on older devices (e.g A0, B0) which don't support 64-byte CQEs. In order to keep existing systems functional when they update to a newer kernel that contains these changes in VF and userspace ABI, a module parameter enable_64b_cqe_eqe must be set to enable 64-byte mode; the default is currently false. Signed-off-by: Eli Cohen <eli@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-10-21 22:59:24 +08:00
return err;
}
int mlx4_ib_destroy_cq(struct ib_cq *cq)
{
struct mlx4_ib_dev *dev = to_mdev(cq->device);
struct mlx4_ib_cq *mcq = to_mcq(cq);
mlx4_cq_free(dev->dev, &mcq->mcq);
mlx4_mtt_cleanup(dev->dev, &mcq->buf.mtt);
if (cq->uobject) {
mlx4_ib_db_unmap_user(to_mucontext(cq->uobject->context), &mcq->db);
ib_umem_release(mcq->umem);
} else {
mlx4_ib_free_cq_buf(dev, &mcq->buf, cq->cqe);
mlx4_db_free(dev->dev, &mcq->db);
}
kfree(mcq);
return 0;
}
static void dump_cqe(void *cqe)
{
__be32 *buf = cqe;
pr_debug("CQE contents %08x %08x %08x %08x %08x %08x %08x %08x\n",
be32_to_cpu(buf[0]), be32_to_cpu(buf[1]), be32_to_cpu(buf[2]),
be32_to_cpu(buf[3]), be32_to_cpu(buf[4]), be32_to_cpu(buf[5]),
be32_to_cpu(buf[6]), be32_to_cpu(buf[7]));
}
static void mlx4_ib_handle_error_cqe(struct mlx4_err_cqe *cqe,
struct ib_wc *wc)
{
if (cqe->syndrome == MLX4_CQE_SYNDROME_LOCAL_QP_OP_ERR) {
pr_debug("local QP operation err "
"(QPN %06x, WQE index %x, vendor syndrome %02x, "
"opcode = %02x)\n",
be32_to_cpu(cqe->my_qpn), be16_to_cpu(cqe->wqe_index),
cqe->vendor_err_syndrome,
cqe->owner_sr_opcode & ~MLX4_CQE_OWNER_MASK);
dump_cqe(cqe);
}
switch (cqe->syndrome) {
case MLX4_CQE_SYNDROME_LOCAL_LENGTH_ERR:
wc->status = IB_WC_LOC_LEN_ERR;
break;
case MLX4_CQE_SYNDROME_LOCAL_QP_OP_ERR:
wc->status = IB_WC_LOC_QP_OP_ERR;
break;
case MLX4_CQE_SYNDROME_LOCAL_PROT_ERR:
wc->status = IB_WC_LOC_PROT_ERR;
break;
case MLX4_CQE_SYNDROME_WR_FLUSH_ERR:
wc->status = IB_WC_WR_FLUSH_ERR;
break;
case MLX4_CQE_SYNDROME_MW_BIND_ERR:
wc->status = IB_WC_MW_BIND_ERR;
break;
case MLX4_CQE_SYNDROME_BAD_RESP_ERR:
wc->status = IB_WC_BAD_RESP_ERR;
break;
case MLX4_CQE_SYNDROME_LOCAL_ACCESS_ERR:
wc->status = IB_WC_LOC_ACCESS_ERR;
break;
case MLX4_CQE_SYNDROME_REMOTE_INVAL_REQ_ERR:
wc->status = IB_WC_REM_INV_REQ_ERR;
break;
case MLX4_CQE_SYNDROME_REMOTE_ACCESS_ERR:
wc->status = IB_WC_REM_ACCESS_ERR;
break;
case MLX4_CQE_SYNDROME_REMOTE_OP_ERR:
wc->status = IB_WC_REM_OP_ERR;
break;
case MLX4_CQE_SYNDROME_TRANSPORT_RETRY_EXC_ERR:
wc->status = IB_WC_RETRY_EXC_ERR;
break;
case MLX4_CQE_SYNDROME_RNR_RETRY_EXC_ERR:
wc->status = IB_WC_RNR_RETRY_EXC_ERR;
break;
case MLX4_CQE_SYNDROME_REMOTE_ABORTED_ERR:
wc->status = IB_WC_REM_ABORT_ERR;
break;
default:
wc->status = IB_WC_GENERAL_ERR;
break;
}
wc->vendor_err = cqe->vendor_err_syndrome;
}
static int mlx4_ib_ipoib_csum_ok(__be16 status, __be16 checksum)
{
return ((status & cpu_to_be16(MLX4_CQE_STATUS_IPV4 |
MLX4_CQE_STATUS_IPV4F |
MLX4_CQE_STATUS_IPV4OPT |
MLX4_CQE_STATUS_IPV6 |
MLX4_CQE_STATUS_IPOK)) ==
cpu_to_be16(MLX4_CQE_STATUS_IPV4 |
MLX4_CQE_STATUS_IPOK)) &&
(status & cpu_to_be16(MLX4_CQE_STATUS_UDP |
MLX4_CQE_STATUS_TCP)) &&
checksum == cpu_to_be16(0xffff);
}
IB/mlx4: SR-IOV IB context objects and proxy/tunnel SQP support 1. Introduce the basic SR-IOV parvirtualization context objects for multiplexing and demultiplexing MADs. 2. Introduce support for the new proxy and tunnel QP types. This patch introduces the objects required by the master for managing QP paravirtualization for guests. struct mlx4_ib_sriov is created by the master only. It is a container for the following: 1. All the info required by the PPF to multiplex and de-multiplex MADs (including those from the PF). (struct mlx4_ib_demux_ctx demux) 2. All the info required to manage alias GUIDs (i.e., the GUID at index 0 that each guest perceives. In fact, this is not the GUID which is actually at index 0, but is, in fact, the GUID which is at index[<VF number>] in the physical table. 3. structures which are used to manage CM paravirtualization 4. structures for managing the real special QPs when running in SR-IOV mode. The real SQPs are controlled by the PPF in this case. All SQPs created and controlled by the ib core layer are proxy SQP. struct mlx4_ib_demux_ctx contains the information per port needed to manage paravirtualization: 1. All multicast paravirt info 2. All tunnel-qp paravirt info for the port. 3. GUID-table and GUID-prefix for the port 4. work queues. struct mlx4_ib_demux_pv_ctx contains all the info for managing the paravirtualized QPs for one slave/port. struct mlx4_ib_demux_pv_qp contains the info need to run an individual QP (either tunnel qp or real SQP). Note: We made use of the 2 most significant bits in enum mlx4_ib_qp_flags (based on enum ib_qp_create_flags in ib_verbs.h). We need these bits in the low-level driver for internal purposes. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-08-03 16:40:40 +08:00
static int use_tunnel_data(struct mlx4_ib_qp *qp, struct mlx4_ib_cq *cq, struct ib_wc *wc,
unsigned tail, struct mlx4_cqe *cqe)
{
struct mlx4_ib_proxy_sqp_hdr *hdr;
ib_dma_sync_single_for_cpu(qp->ibqp.device,
qp->sqp_proxy_rcv[tail].map,
sizeof (struct mlx4_ib_proxy_sqp_hdr),
DMA_FROM_DEVICE);
hdr = (struct mlx4_ib_proxy_sqp_hdr *) (qp->sqp_proxy_rcv[tail].addr);
wc->pkey_index = be16_to_cpu(hdr->tun.pkey_index);
wc->slid = be16_to_cpu(hdr->tun.slid_mac_47_32);
wc->sl = (u8) (be16_to_cpu(hdr->tun.sl_vid) >> 12);
wc->src_qp = be32_to_cpu(hdr->tun.flags_src_qp) & 0xFFFFFF;
wc->wc_flags |= (hdr->tun.g_ml_path & 0x80) ? (IB_WC_GRH) : 0;
wc->dlid_path_bits = 0;
return 0;
}
static int mlx4_ib_poll_one(struct mlx4_ib_cq *cq,
struct mlx4_ib_qp **cur_qp,
struct ib_wc *wc)
{
struct mlx4_cqe *cqe;
struct mlx4_qp *mqp;
struct mlx4_ib_wq *wq;
struct mlx4_ib_srq *srq;
int is_send;
int is_error;
u32 g_mlpath_rqpn;
u16 wqe_ctr;
IB/mlx4: SR-IOV IB context objects and proxy/tunnel SQP support 1. Introduce the basic SR-IOV parvirtualization context objects for multiplexing and demultiplexing MADs. 2. Introduce support for the new proxy and tunnel QP types. This patch introduces the objects required by the master for managing QP paravirtualization for guests. struct mlx4_ib_sriov is created by the master only. It is a container for the following: 1. All the info required by the PPF to multiplex and de-multiplex MADs (including those from the PF). (struct mlx4_ib_demux_ctx demux) 2. All the info required to manage alias GUIDs (i.e., the GUID at index 0 that each guest perceives. In fact, this is not the GUID which is actually at index 0, but is, in fact, the GUID which is at index[<VF number>] in the physical table. 3. structures which are used to manage CM paravirtualization 4. structures for managing the real special QPs when running in SR-IOV mode. The real SQPs are controlled by the PPF in this case. All SQPs created and controlled by the ib core layer are proxy SQP. struct mlx4_ib_demux_ctx contains the information per port needed to manage paravirtualization: 1. All multicast paravirt info 2. All tunnel-qp paravirt info for the port. 3. GUID-table and GUID-prefix for the port 4. work queues. struct mlx4_ib_demux_pv_ctx contains all the info for managing the paravirtualized QPs for one slave/port. struct mlx4_ib_demux_pv_qp contains the info need to run an individual QP (either tunnel qp or real SQP). Note: We made use of the 2 most significant bits in enum mlx4_ib_qp_flags (based on enum ib_qp_create_flags in ib_verbs.h). We need these bits in the low-level driver for internal purposes. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-08-03 16:40:40 +08:00
unsigned tail = 0;
repoll:
cqe = next_cqe_sw(cq);
if (!cqe)
return -EAGAIN;
mlx4: 64-byte CQE/EQE support ConnectX-3 devices can use either 64- or 32-byte completion queue entries (CQEs) and event queue entries (EQEs). Using 64-byte EQEs/CQEs performs better because each entry is aligned to a complete cacheline. This patch queries the HCA's capabilities, and if it supports 64-byte CQEs and EQES the driver will configure the HW to work in 64-byte mode. The 32-byte vs 64-byte mode is global per HCA and not per CQ or EQ. Since this mode is global, userspace (libmlx4) must be updated to work with the configured CQE size, and guests using SR-IOV virtual functions need to know both EQE and CQE size. In case one of the 64-byte CQE/EQE capabilities is activated, the patch makes sure that older guest drivers that use the QUERY_DEV_FUNC command (e.g as done in mlx4_core of Linux 3.3..3.6) will notice that they need an update to be able to work with the PPF. This is done by changing the returned pf_context_behaviour not to be zero any more. In case none of these capabilities is activated that value remains zero and older guest drivers can run OK. The SRIOV related flow is as follows 1. the PPF does the detection of the new capabilities using QUERY_DEV_CAP command. 2. the PPF activates the new capabilities using INIT_HCA. 3. the VF detects if the PPF activated the capabilities using QUERY_HCA, and if this is the case activates them for itself too. Note that the VF detects that it must be aware to the new PF behaviour using QUERY_FUNC_CAP. Steps 1 and 2 apply also for native mode. User space notification is done through a new field introduced in struct mlx4_ib_ucontext which holds device capabilities for which user space must take action. This changes the binary interface so the ABI towards libmlx4 exposed through uverbs is bumped from 3 to 4 but only when **needed** i.e. only when the driver does use 64-byte CQEs or future device capabilities which must be in sync by user space. This practice allows to work with unmodified libmlx4 on older devices (e.g A0, B0) which don't support 64-byte CQEs. In order to keep existing systems functional when they update to a newer kernel that contains these changes in VF and userspace ABI, a module parameter enable_64b_cqe_eqe must be set to enable 64-byte mode; the default is currently false. Signed-off-by: Eli Cohen <eli@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-10-21 22:59:24 +08:00
if (cq->buf.entry_size == 64)
cqe++;
++cq->mcq.cons_index;
/*
* Make sure we read CQ entry contents after we've checked the
* ownership bit.
*/
rmb();
is_send = cqe->owner_sr_opcode & MLX4_CQE_IS_SEND_MASK;
is_error = (cqe->owner_sr_opcode & MLX4_CQE_OPCODE_MASK) ==
MLX4_CQE_OPCODE_ERROR;
if (unlikely((cqe->owner_sr_opcode & MLX4_CQE_OPCODE_MASK) == MLX4_OPCODE_NOP &&
is_send)) {
pr_warn("Completion for NOP opcode detected!\n");
return -EINVAL;
}
/* Resize CQ in progress */
if (unlikely((cqe->owner_sr_opcode & MLX4_CQE_OPCODE_MASK) == MLX4_CQE_OPCODE_RESIZE)) {
if (cq->resize_buf) {
struct mlx4_ib_dev *dev = to_mdev(cq->ibcq.device);
mlx4_ib_free_cq_buf(dev, &cq->buf, cq->ibcq.cqe);
cq->buf = cq->resize_buf->buf;
cq->ibcq.cqe = cq->resize_buf->cqe;
kfree(cq->resize_buf);
cq->resize_buf = NULL;
}
goto repoll;
}
if (!*cur_qp ||
(be32_to_cpu(cqe->vlan_my_qpn) & MLX4_CQE_QPN_MASK) != (*cur_qp)->mqp.qpn) {
/*
* We do not have to take the QP table lock here,
* because CQs will be locked while QPs are removed
* from the table.
*/
mqp = __mlx4_qp_lookup(to_mdev(cq->ibcq.device)->dev,
be32_to_cpu(cqe->vlan_my_qpn));
if (unlikely(!mqp)) {
pr_warn("CQ %06x with entry for unknown QPN %06x\n",
cq->mcq.cqn, be32_to_cpu(cqe->vlan_my_qpn) & MLX4_CQE_QPN_MASK);
return -EINVAL;
}
*cur_qp = to_mibqp(mqp);
}
wc->qp = &(*cur_qp)->ibqp;
if (is_send) {
wq = &(*cur_qp)->sq;
if (!(*cur_qp)->sq_signal_bits) {
wqe_ctr = be16_to_cpu(cqe->wqe_index);
wq->tail += (u16) (wqe_ctr - (u16) wq->tail);
}
wc->wr_id = wq->wrid[wq->tail & (wq->wqe_cnt - 1)];
++wq->tail;
} else if ((*cur_qp)->ibqp.srq) {
srq = to_msrq((*cur_qp)->ibqp.srq);
wqe_ctr = be16_to_cpu(cqe->wqe_index);
wc->wr_id = srq->wrid[wqe_ctr];
mlx4_ib_free_srq_wqe(srq, wqe_ctr);
} else {
wq = &(*cur_qp)->rq;
IB/mlx4: SR-IOV IB context objects and proxy/tunnel SQP support 1. Introduce the basic SR-IOV parvirtualization context objects for multiplexing and demultiplexing MADs. 2. Introduce support for the new proxy and tunnel QP types. This patch introduces the objects required by the master for managing QP paravirtualization for guests. struct mlx4_ib_sriov is created by the master only. It is a container for the following: 1. All the info required by the PPF to multiplex and de-multiplex MADs (including those from the PF). (struct mlx4_ib_demux_ctx demux) 2. All the info required to manage alias GUIDs (i.e., the GUID at index 0 that each guest perceives. In fact, this is not the GUID which is actually at index 0, but is, in fact, the GUID which is at index[<VF number>] in the physical table. 3. structures which are used to manage CM paravirtualization 4. structures for managing the real special QPs when running in SR-IOV mode. The real SQPs are controlled by the PPF in this case. All SQPs created and controlled by the ib core layer are proxy SQP. struct mlx4_ib_demux_ctx contains the information per port needed to manage paravirtualization: 1. All multicast paravirt info 2. All tunnel-qp paravirt info for the port. 3. GUID-table and GUID-prefix for the port 4. work queues. struct mlx4_ib_demux_pv_ctx contains all the info for managing the paravirtualized QPs for one slave/port. struct mlx4_ib_demux_pv_qp contains the info need to run an individual QP (either tunnel qp or real SQP). Note: We made use of the 2 most significant bits in enum mlx4_ib_qp_flags (based on enum ib_qp_create_flags in ib_verbs.h). We need these bits in the low-level driver for internal purposes. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-08-03 16:40:40 +08:00
tail = wq->tail & (wq->wqe_cnt - 1);
wc->wr_id = wq->wrid[tail];
++wq->tail;
}
if (unlikely(is_error)) {
mlx4_ib_handle_error_cqe((struct mlx4_err_cqe *) cqe, wc);
return 0;
}
wc->status = IB_WC_SUCCESS;
if (is_send) {
wc->wc_flags = 0;
switch (cqe->owner_sr_opcode & MLX4_CQE_OPCODE_MASK) {
case MLX4_OPCODE_RDMA_WRITE_IMM:
wc->wc_flags |= IB_WC_WITH_IMM;
case MLX4_OPCODE_RDMA_WRITE:
wc->opcode = IB_WC_RDMA_WRITE;
break;
case MLX4_OPCODE_SEND_IMM:
wc->wc_flags |= IB_WC_WITH_IMM;
case MLX4_OPCODE_SEND:
case MLX4_OPCODE_SEND_INVAL:
wc->opcode = IB_WC_SEND;
break;
case MLX4_OPCODE_RDMA_READ:
wc->opcode = IB_WC_RDMA_READ;
wc->byte_len = be32_to_cpu(cqe->byte_cnt);
break;
case MLX4_OPCODE_ATOMIC_CS:
wc->opcode = IB_WC_COMP_SWAP;
wc->byte_len = 8;
break;
case MLX4_OPCODE_ATOMIC_FA:
wc->opcode = IB_WC_FETCH_ADD;
wc->byte_len = 8;
break;
case MLX4_OPCODE_MASKED_ATOMIC_CS:
wc->opcode = IB_WC_MASKED_COMP_SWAP;
wc->byte_len = 8;
break;
case MLX4_OPCODE_MASKED_ATOMIC_FA:
wc->opcode = IB_WC_MASKED_FETCH_ADD;
wc->byte_len = 8;
break;
case MLX4_OPCODE_BIND_MW:
wc->opcode = IB_WC_BIND_MW;
break;
case MLX4_OPCODE_LSO:
wc->opcode = IB_WC_LSO;
break;
case MLX4_OPCODE_FMR:
wc->opcode = IB_WC_FAST_REG_MR;
break;
case MLX4_OPCODE_LOCAL_INVAL:
wc->opcode = IB_WC_LOCAL_INV;
break;
}
} else {
wc->byte_len = be32_to_cpu(cqe->byte_cnt);
switch (cqe->owner_sr_opcode & MLX4_CQE_OPCODE_MASK) {
case MLX4_RECV_OPCODE_RDMA_WRITE_IMM:
RDMA/core: Add memory management extensions support This patch adds support for the IB "base memory management extension" (BMME) and the equivalent iWARP operations (which the iWARP verbs mandates all devices must implement). The new operations are: - Allocate an ib_mr for use in fast register work requests. - Allocate/free a physical buffer lists for use in fast register work requests. This allows device drivers to allocate this memory as needed for use in posting send requests (eg via dma_alloc_coherent). - New send queue work requests: * send with remote invalidate * fast register memory region * local invalidate memory region * RDMA read with invalidate local memory region (iWARP only) Consumer interface details: - A new device capability flag IB_DEVICE_MEM_MGT_EXTENSIONS is added to indicate device support for these features. - New send work request opcodes IB_WR_FAST_REG_MR, IB_WR_LOCAL_INV, IB_WR_RDMA_READ_WITH_INV are added. - A new consumer API function, ib_alloc_mr() is added to allocate fast register memory regions. - New consumer API functions, ib_alloc_fast_reg_page_list() and ib_free_fast_reg_page_list() are added to allocate and free device-specific memory for fast registration page lists. - A new consumer API function, ib_update_fast_reg_key(), is added to allow the key portion of the R_Key and L_Key of a fast registration MR to be updated. Consumers call this if desired before posting a IB_WR_FAST_REG_MR work request. Consumers can use this as follows: - MR is allocated with ib_alloc_mr(). - Page list memory is allocated with ib_alloc_fast_reg_page_list(). - MR R_Key/L_Key "key" field is updated with ib_update_fast_reg_key(). - MR made VALID and bound to a specific page list via ib_post_send(IB_WR_FAST_REG_MR) - MR made INVALID via ib_post_send(IB_WR_LOCAL_INV), ib_post_send(IB_WR_RDMA_READ_WITH_INV) or an incoming send with invalidate operation. - MR is deallocated with ib_dereg_mr() - page lists dealloced via ib_free_fast_reg_page_list(). Applications can allocate a fast register MR once, and then can repeatedly bind the MR to different physical block lists (PBLs) via posting work requests to a send queue (SQ). For each outstanding MR-to-PBL binding in the SQ pipe, a fast_reg_page_list needs to be allocated (the fast_reg_page_list is owned by the low-level driver from the consumer posting a work request until the request completes). Thus pipelining can be achieved while still allowing device-specific page_list processing. The 32-bit fast register memory key/STag is composed of a 24-bit index and an 8-bit key. The application can change the key each time it fast registers thus allowing more control over the peer's use of the key/STag (ie it can effectively be changed each time the rkey is rebound to a page list). Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-07-15 14:48:45 +08:00
wc->opcode = IB_WC_RECV_RDMA_WITH_IMM;
wc->wc_flags = IB_WC_WITH_IMM;
wc->ex.imm_data = cqe->immed_rss_invalid;
break;
case MLX4_RECV_OPCODE_SEND_INVAL:
wc->opcode = IB_WC_RECV;
wc->wc_flags = IB_WC_WITH_INVALIDATE;
wc->ex.invalidate_rkey = be32_to_cpu(cqe->immed_rss_invalid);
break;
case MLX4_RECV_OPCODE_SEND:
wc->opcode = IB_WC_RECV;
wc->wc_flags = 0;
break;
case MLX4_RECV_OPCODE_SEND_IMM:
RDMA/core: Add memory management extensions support This patch adds support for the IB "base memory management extension" (BMME) and the equivalent iWARP operations (which the iWARP verbs mandates all devices must implement). The new operations are: - Allocate an ib_mr for use in fast register work requests. - Allocate/free a physical buffer lists for use in fast register work requests. This allows device drivers to allocate this memory as needed for use in posting send requests (eg via dma_alloc_coherent). - New send queue work requests: * send with remote invalidate * fast register memory region * local invalidate memory region * RDMA read with invalidate local memory region (iWARP only) Consumer interface details: - A new device capability flag IB_DEVICE_MEM_MGT_EXTENSIONS is added to indicate device support for these features. - New send work request opcodes IB_WR_FAST_REG_MR, IB_WR_LOCAL_INV, IB_WR_RDMA_READ_WITH_INV are added. - A new consumer API function, ib_alloc_mr() is added to allocate fast register memory regions. - New consumer API functions, ib_alloc_fast_reg_page_list() and ib_free_fast_reg_page_list() are added to allocate and free device-specific memory for fast registration page lists. - A new consumer API function, ib_update_fast_reg_key(), is added to allow the key portion of the R_Key and L_Key of a fast registration MR to be updated. Consumers call this if desired before posting a IB_WR_FAST_REG_MR work request. Consumers can use this as follows: - MR is allocated with ib_alloc_mr(). - Page list memory is allocated with ib_alloc_fast_reg_page_list(). - MR R_Key/L_Key "key" field is updated with ib_update_fast_reg_key(). - MR made VALID and bound to a specific page list via ib_post_send(IB_WR_FAST_REG_MR) - MR made INVALID via ib_post_send(IB_WR_LOCAL_INV), ib_post_send(IB_WR_RDMA_READ_WITH_INV) or an incoming send with invalidate operation. - MR is deallocated with ib_dereg_mr() - page lists dealloced via ib_free_fast_reg_page_list(). Applications can allocate a fast register MR once, and then can repeatedly bind the MR to different physical block lists (PBLs) via posting work requests to a send queue (SQ). For each outstanding MR-to-PBL binding in the SQ pipe, a fast_reg_page_list needs to be allocated (the fast_reg_page_list is owned by the low-level driver from the consumer posting a work request until the request completes). Thus pipelining can be achieved while still allowing device-specific page_list processing. The 32-bit fast register memory key/STag is composed of a 24-bit index and an 8-bit key. The application can change the key each time it fast registers thus allowing more control over the peer's use of the key/STag (ie it can effectively be changed each time the rkey is rebound to a page list). Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-07-15 14:48:45 +08:00
wc->opcode = IB_WC_RECV;
wc->wc_flags = IB_WC_WITH_IMM;
wc->ex.imm_data = cqe->immed_rss_invalid;
break;
}
IB/mlx4: SR-IOV IB context objects and proxy/tunnel SQP support 1. Introduce the basic SR-IOV parvirtualization context objects for multiplexing and demultiplexing MADs. 2. Introduce support for the new proxy and tunnel QP types. This patch introduces the objects required by the master for managing QP paravirtualization for guests. struct mlx4_ib_sriov is created by the master only. It is a container for the following: 1. All the info required by the PPF to multiplex and de-multiplex MADs (including those from the PF). (struct mlx4_ib_demux_ctx demux) 2. All the info required to manage alias GUIDs (i.e., the GUID at index 0 that each guest perceives. In fact, this is not the GUID which is actually at index 0, but is, in fact, the GUID which is at index[<VF number>] in the physical table. 3. structures which are used to manage CM paravirtualization 4. structures for managing the real special QPs when running in SR-IOV mode. The real SQPs are controlled by the PPF in this case. All SQPs created and controlled by the ib core layer are proxy SQP. struct mlx4_ib_demux_ctx contains the information per port needed to manage paravirtualization: 1. All multicast paravirt info 2. All tunnel-qp paravirt info for the port. 3. GUID-table and GUID-prefix for the port 4. work queues. struct mlx4_ib_demux_pv_ctx contains all the info for managing the paravirtualized QPs for one slave/port. struct mlx4_ib_demux_pv_qp contains the info need to run an individual QP (either tunnel qp or real SQP). Note: We made use of the 2 most significant bits in enum mlx4_ib_qp_flags (based on enum ib_qp_create_flags in ib_verbs.h). We need these bits in the low-level driver for internal purposes. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-08-03 16:40:40 +08:00
if (mlx4_is_mfunc(to_mdev(cq->ibcq.device)->dev)) {
if ((*cur_qp)->mlx4_ib_qp_type &
(MLX4_IB_QPT_PROXY_SMI_OWNER |
MLX4_IB_QPT_PROXY_SMI | MLX4_IB_QPT_PROXY_GSI))
return use_tunnel_data(*cur_qp, cq, wc, tail, cqe);
}
wc->slid = be16_to_cpu(cqe->rlid);
g_mlpath_rqpn = be32_to_cpu(cqe->g_mlpath_rqpn);
wc->src_qp = g_mlpath_rqpn & 0xffffff;
wc->dlid_path_bits = (g_mlpath_rqpn >> 24) & 0x7f;
wc->wc_flags |= g_mlpath_rqpn & 0x80000000 ? IB_WC_GRH : 0;
wc->pkey_index = be32_to_cpu(cqe->immed_rss_invalid) & 0x7f;
wc->wc_flags |= mlx4_ib_ipoib_csum_ok(cqe->status,
cqe->checksum) ? IB_WC_IP_CSUM_OK : 0;
if (rdma_port_get_link_layer(wc->qp->device,
(*cur_qp)->port) == IB_LINK_LAYER_ETHERNET)
wc->sl = be16_to_cpu(cqe->sl_vid) >> 13;
else
wc->sl = be16_to_cpu(cqe->sl_vid) >> 12;
}
return 0;
}
int mlx4_ib_poll_cq(struct ib_cq *ibcq, int num_entries, struct ib_wc *wc)
{
struct mlx4_ib_cq *cq = to_mcq(ibcq);
struct mlx4_ib_qp *cur_qp = NULL;
unsigned long flags;
int npolled;
int err = 0;
spin_lock_irqsave(&cq->lock, flags);
for (npolled = 0; npolled < num_entries; ++npolled) {
err = mlx4_ib_poll_one(cq, &cur_qp, wc + npolled);
if (err)
break;
}
mlx4_cq_set_ci(&cq->mcq);
spin_unlock_irqrestore(&cq->lock, flags);
if (err == 0 || err == -EAGAIN)
return npolled;
else
return err;
}
int mlx4_ib_arm_cq(struct ib_cq *ibcq, enum ib_cq_notify_flags flags)
{
mlx4_cq_arm(&to_mcq(ibcq)->mcq,
(flags & IB_CQ_SOLICITED_MASK) == IB_CQ_SOLICITED ?
MLX4_CQ_DB_REQ_NOT_SOL : MLX4_CQ_DB_REQ_NOT,
to_mdev(ibcq->device)->uar_map,
MLX4_GET_DOORBELL_LOCK(&to_mdev(ibcq->device)->uar_lock));
return 0;
}
void __mlx4_ib_cq_clean(struct mlx4_ib_cq *cq, u32 qpn, struct mlx4_ib_srq *srq)
{
u32 prod_index;
int nfreed = 0;
struct mlx4_cqe *cqe, *dest;
u8 owner_bit;
mlx4: 64-byte CQE/EQE support ConnectX-3 devices can use either 64- or 32-byte completion queue entries (CQEs) and event queue entries (EQEs). Using 64-byte EQEs/CQEs performs better because each entry is aligned to a complete cacheline. This patch queries the HCA's capabilities, and if it supports 64-byte CQEs and EQES the driver will configure the HW to work in 64-byte mode. The 32-byte vs 64-byte mode is global per HCA and not per CQ or EQ. Since this mode is global, userspace (libmlx4) must be updated to work with the configured CQE size, and guests using SR-IOV virtual functions need to know both EQE and CQE size. In case one of the 64-byte CQE/EQE capabilities is activated, the patch makes sure that older guest drivers that use the QUERY_DEV_FUNC command (e.g as done in mlx4_core of Linux 3.3..3.6) will notice that they need an update to be able to work with the PPF. This is done by changing the returned pf_context_behaviour not to be zero any more. In case none of these capabilities is activated that value remains zero and older guest drivers can run OK. The SRIOV related flow is as follows 1. the PPF does the detection of the new capabilities using QUERY_DEV_CAP command. 2. the PPF activates the new capabilities using INIT_HCA. 3. the VF detects if the PPF activated the capabilities using QUERY_HCA, and if this is the case activates them for itself too. Note that the VF detects that it must be aware to the new PF behaviour using QUERY_FUNC_CAP. Steps 1 and 2 apply also for native mode. User space notification is done through a new field introduced in struct mlx4_ib_ucontext which holds device capabilities for which user space must take action. This changes the binary interface so the ABI towards libmlx4 exposed through uverbs is bumped from 3 to 4 but only when **needed** i.e. only when the driver does use 64-byte CQEs or future device capabilities which must be in sync by user space. This practice allows to work with unmodified libmlx4 on older devices (e.g A0, B0) which don't support 64-byte CQEs. In order to keep existing systems functional when they update to a newer kernel that contains these changes in VF and userspace ABI, a module parameter enable_64b_cqe_eqe must be set to enable 64-byte mode; the default is currently false. Signed-off-by: Eli Cohen <eli@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-10-21 22:59:24 +08:00
int cqe_inc = cq->buf.entry_size == 64 ? 1 : 0;
/*
* First we need to find the current producer index, so we
* know where to start cleaning from. It doesn't matter if HW
* adds new entries after this loop -- the QP we're worried
* about is already in RESET, so the new entries won't come
* from our QP and therefore don't need to be checked.
*/
for (prod_index = cq->mcq.cons_index; get_sw_cqe(cq, prod_index); ++prod_index)
if (prod_index == cq->mcq.cons_index + cq->ibcq.cqe)
break;
/*
* Now sweep backwards through the CQ, removing CQ entries
* that match our QP by copying older entries on top of them.
*/
while ((int) --prod_index - (int) cq->mcq.cons_index >= 0) {
cqe = get_cqe(cq, prod_index & cq->ibcq.cqe);
mlx4: 64-byte CQE/EQE support ConnectX-3 devices can use either 64- or 32-byte completion queue entries (CQEs) and event queue entries (EQEs). Using 64-byte EQEs/CQEs performs better because each entry is aligned to a complete cacheline. This patch queries the HCA's capabilities, and if it supports 64-byte CQEs and EQES the driver will configure the HW to work in 64-byte mode. The 32-byte vs 64-byte mode is global per HCA and not per CQ or EQ. Since this mode is global, userspace (libmlx4) must be updated to work with the configured CQE size, and guests using SR-IOV virtual functions need to know both EQE and CQE size. In case one of the 64-byte CQE/EQE capabilities is activated, the patch makes sure that older guest drivers that use the QUERY_DEV_FUNC command (e.g as done in mlx4_core of Linux 3.3..3.6) will notice that they need an update to be able to work with the PPF. This is done by changing the returned pf_context_behaviour not to be zero any more. In case none of these capabilities is activated that value remains zero and older guest drivers can run OK. The SRIOV related flow is as follows 1. the PPF does the detection of the new capabilities using QUERY_DEV_CAP command. 2. the PPF activates the new capabilities using INIT_HCA. 3. the VF detects if the PPF activated the capabilities using QUERY_HCA, and if this is the case activates them for itself too. Note that the VF detects that it must be aware to the new PF behaviour using QUERY_FUNC_CAP. Steps 1 and 2 apply also for native mode. User space notification is done through a new field introduced in struct mlx4_ib_ucontext which holds device capabilities for which user space must take action. This changes the binary interface so the ABI towards libmlx4 exposed through uverbs is bumped from 3 to 4 but only when **needed** i.e. only when the driver does use 64-byte CQEs or future device capabilities which must be in sync by user space. This practice allows to work with unmodified libmlx4 on older devices (e.g A0, B0) which don't support 64-byte CQEs. In order to keep existing systems functional when they update to a newer kernel that contains these changes in VF and userspace ABI, a module parameter enable_64b_cqe_eqe must be set to enable 64-byte mode; the default is currently false. Signed-off-by: Eli Cohen <eli@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-10-21 22:59:24 +08:00
cqe += cqe_inc;
if ((be32_to_cpu(cqe->vlan_my_qpn) & MLX4_CQE_QPN_MASK) == qpn) {
if (srq && !(cqe->owner_sr_opcode & MLX4_CQE_IS_SEND_MASK))
mlx4_ib_free_srq_wqe(srq, be16_to_cpu(cqe->wqe_index));
++nfreed;
} else if (nfreed) {
dest = get_cqe(cq, (prod_index + nfreed) & cq->ibcq.cqe);
mlx4: 64-byte CQE/EQE support ConnectX-3 devices can use either 64- or 32-byte completion queue entries (CQEs) and event queue entries (EQEs). Using 64-byte EQEs/CQEs performs better because each entry is aligned to a complete cacheline. This patch queries the HCA's capabilities, and if it supports 64-byte CQEs and EQES the driver will configure the HW to work in 64-byte mode. The 32-byte vs 64-byte mode is global per HCA and not per CQ or EQ. Since this mode is global, userspace (libmlx4) must be updated to work with the configured CQE size, and guests using SR-IOV virtual functions need to know both EQE and CQE size. In case one of the 64-byte CQE/EQE capabilities is activated, the patch makes sure that older guest drivers that use the QUERY_DEV_FUNC command (e.g as done in mlx4_core of Linux 3.3..3.6) will notice that they need an update to be able to work with the PPF. This is done by changing the returned pf_context_behaviour not to be zero any more. In case none of these capabilities is activated that value remains zero and older guest drivers can run OK. The SRIOV related flow is as follows 1. the PPF does the detection of the new capabilities using QUERY_DEV_CAP command. 2. the PPF activates the new capabilities using INIT_HCA. 3. the VF detects if the PPF activated the capabilities using QUERY_HCA, and if this is the case activates them for itself too. Note that the VF detects that it must be aware to the new PF behaviour using QUERY_FUNC_CAP. Steps 1 and 2 apply also for native mode. User space notification is done through a new field introduced in struct mlx4_ib_ucontext which holds device capabilities for which user space must take action. This changes the binary interface so the ABI towards libmlx4 exposed through uverbs is bumped from 3 to 4 but only when **needed** i.e. only when the driver does use 64-byte CQEs or future device capabilities which must be in sync by user space. This practice allows to work with unmodified libmlx4 on older devices (e.g A0, B0) which don't support 64-byte CQEs. In order to keep existing systems functional when they update to a newer kernel that contains these changes in VF and userspace ABI, a module parameter enable_64b_cqe_eqe must be set to enable 64-byte mode; the default is currently false. Signed-off-by: Eli Cohen <eli@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-10-21 22:59:24 +08:00
dest += cqe_inc;
owner_bit = dest->owner_sr_opcode & MLX4_CQE_OWNER_MASK;
memcpy(dest, cqe, sizeof *cqe);
dest->owner_sr_opcode = owner_bit |
(dest->owner_sr_opcode & ~MLX4_CQE_OWNER_MASK);
}
}
if (nfreed) {
cq->mcq.cons_index += nfreed;
/*
* Make sure update of buffer contents is done before
* updating consumer index.
*/
wmb();
mlx4_cq_set_ci(&cq->mcq);
}
}
void mlx4_ib_cq_clean(struct mlx4_ib_cq *cq, u32 qpn, struct mlx4_ib_srq *srq)
{
spin_lock_irq(&cq->lock);
__mlx4_ib_cq_clean(cq, qpn, srq);
spin_unlock_irq(&cq->lock);
}