OpenCloudOS-Kernel/arch/arm/mach-tegra/irq.c

104 lines
2.4 KiB
C
Raw Normal View History

/*
* Copyright (C) 2011 Google, Inc.
*
* Author:
* Colin Cross <ccross@android.com>
*
* Copyright (C) 2010,2013, NVIDIA Corporation
*
* This software is licensed under the terms of the GNU General Public
* License version 2, as published by the Free Software Foundation, and
* may be copied, distributed, and modified under those terms.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
*/
ARM: tegra114: Reprogram GIC CPU interface to bypass IRQ on CPU PM entry There is a difference between GICv1 and v2 when CPU in power management mode (aka CPU power down on Tegra). For GICv1, IRQ/FIQ interrupt lines going to CPU are same lines which are also used for wake-interrupt. Therefore, we cannot disable the GIC CPU interface if we need to use same interrupts for CPU wake purpose. This creates a race condition for CPU power off entry. Also, in GICv1, disabling GICv1 CPU interface puts GICv1 into bypass mode such that incoming legacy IRQ/FIQ are sent to CPU, which means disabling GIC CPU interface doesn't really disable IRQ/FIQ to CPU. GICv2 provides a wake IRQ/FIQ (for wake-event purpose), which are not disabled by GIC CPU interface. This is done by adding a bypass override capability when the interrupts are disabled at the CPU interface. To support this, there are four bits about IRQ/FIQ BypassDisable in CPU interface Control Register. When the IRQ/FIQ not being driver by the CPU interface, each interrupt output signal can be deasserted rather than being driven by the legacy interrupt input. So the wake-event can be used as wakeup signals to SoC (system power controller). To prevent race conditions and ensure proper interrupt routing on Cortex-A15 CPUs when they are power-gated, add a CPU PM notifier call-back to reprogram the GIC CPU interface on PM entry. The GIC CPU interface will be reset back to its normal state by the common GIC CPU PM exit callback when the CPU wakes up. Based on the work by: Scott Williams <scwilliams@nvidia.com> Signed-off-by: Joseph Lo <josephl@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-07-19 17:25:24 +08:00
#include <linux/cpu_pm.h>
#include <linux/interrupt.h>
#include <linux/io.h>
#include <linux/irqchip/arm-gic.h>
#include <linux/irq.h>
#include <linux/kernel.h>
#include <linux/of_address.h>
#include <linux/of.h>
#include <linux/syscore_ops.h>
#include "board.h"
#include "iomap.h"
#include "irq.h"
#define SGI_MASK 0xFFFF
#ifdef CONFIG_PM_SLEEP
ARM: tegra114: Reprogram GIC CPU interface to bypass IRQ on CPU PM entry There is a difference between GICv1 and v2 when CPU in power management mode (aka CPU power down on Tegra). For GICv1, IRQ/FIQ interrupt lines going to CPU are same lines which are also used for wake-interrupt. Therefore, we cannot disable the GIC CPU interface if we need to use same interrupts for CPU wake purpose. This creates a race condition for CPU power off entry. Also, in GICv1, disabling GICv1 CPU interface puts GICv1 into bypass mode such that incoming legacy IRQ/FIQ are sent to CPU, which means disabling GIC CPU interface doesn't really disable IRQ/FIQ to CPU. GICv2 provides a wake IRQ/FIQ (for wake-event purpose), which are not disabled by GIC CPU interface. This is done by adding a bypass override capability when the interrupts are disabled at the CPU interface. To support this, there are four bits about IRQ/FIQ BypassDisable in CPU interface Control Register. When the IRQ/FIQ not being driver by the CPU interface, each interrupt output signal can be deasserted rather than being driven by the legacy interrupt input. So the wake-event can be used as wakeup signals to SoC (system power controller). To prevent race conditions and ensure proper interrupt routing on Cortex-A15 CPUs when they are power-gated, add a CPU PM notifier call-back to reprogram the GIC CPU interface on PM entry. The GIC CPU interface will be reset back to its normal state by the common GIC CPU PM exit callback when the CPU wakes up. Based on the work by: Scott Williams <scwilliams@nvidia.com> Signed-off-by: Joseph Lo <josephl@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-07-19 17:25:24 +08:00
static void __iomem *tegra_gic_cpu_base;
#endif
bool tegra_pending_sgi(void)
{
u32 pending_set;
void __iomem *distbase = IO_ADDRESS(TEGRA_ARM_INT_DIST_BASE);
pending_set = readl_relaxed(distbase + GIC_DIST_PENDING_SET);
if (pending_set & SGI_MASK)
return true;
return false;
}
#ifdef CONFIG_PM_SLEEP
ARM: tegra114: Reprogram GIC CPU interface to bypass IRQ on CPU PM entry There is a difference between GICv1 and v2 when CPU in power management mode (aka CPU power down on Tegra). For GICv1, IRQ/FIQ interrupt lines going to CPU are same lines which are also used for wake-interrupt. Therefore, we cannot disable the GIC CPU interface if we need to use same interrupts for CPU wake purpose. This creates a race condition for CPU power off entry. Also, in GICv1, disabling GICv1 CPU interface puts GICv1 into bypass mode such that incoming legacy IRQ/FIQ are sent to CPU, which means disabling GIC CPU interface doesn't really disable IRQ/FIQ to CPU. GICv2 provides a wake IRQ/FIQ (for wake-event purpose), which are not disabled by GIC CPU interface. This is done by adding a bypass override capability when the interrupts are disabled at the CPU interface. To support this, there are four bits about IRQ/FIQ BypassDisable in CPU interface Control Register. When the IRQ/FIQ not being driver by the CPU interface, each interrupt output signal can be deasserted rather than being driven by the legacy interrupt input. So the wake-event can be used as wakeup signals to SoC (system power controller). To prevent race conditions and ensure proper interrupt routing on Cortex-A15 CPUs when they are power-gated, add a CPU PM notifier call-back to reprogram the GIC CPU interface on PM entry. The GIC CPU interface will be reset back to its normal state by the common GIC CPU PM exit callback when the CPU wakes up. Based on the work by: Scott Williams <scwilliams@nvidia.com> Signed-off-by: Joseph Lo <josephl@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-07-19 17:25:24 +08:00
static int tegra_gic_notifier(struct notifier_block *self,
unsigned long cmd, void *v)
{
switch (cmd) {
case CPU_PM_ENTER:
writel_relaxed(0x1E0, tegra_gic_cpu_base + GIC_CPU_CTRL);
break;
}
return NOTIFY_OK;
}
static struct notifier_block tegra_gic_notifier_block = {
.notifier_call = tegra_gic_notifier,
};
static const struct of_device_id tegra114_dt_gic_match[] __initconst = {
{ .compatible = "arm,cortex-a15-gic" },
{ }
};
static void tegra114_gic_cpu_pm_registration(void)
{
struct device_node *dn;
dn = of_find_matching_node(NULL, tegra114_dt_gic_match);
if (!dn)
return;
tegra_gic_cpu_base = of_iomap(dn, 1);
cpu_pm_register_notifier(&tegra_gic_notifier_block);
}
#else
ARM: tegra114: Reprogram GIC CPU interface to bypass IRQ on CPU PM entry There is a difference between GICv1 and v2 when CPU in power management mode (aka CPU power down on Tegra). For GICv1, IRQ/FIQ interrupt lines going to CPU are same lines which are also used for wake-interrupt. Therefore, we cannot disable the GIC CPU interface if we need to use same interrupts for CPU wake purpose. This creates a race condition for CPU power off entry. Also, in GICv1, disabling GICv1 CPU interface puts GICv1 into bypass mode such that incoming legacy IRQ/FIQ are sent to CPU, which means disabling GIC CPU interface doesn't really disable IRQ/FIQ to CPU. GICv2 provides a wake IRQ/FIQ (for wake-event purpose), which are not disabled by GIC CPU interface. This is done by adding a bypass override capability when the interrupts are disabled at the CPU interface. To support this, there are four bits about IRQ/FIQ BypassDisable in CPU interface Control Register. When the IRQ/FIQ not being driver by the CPU interface, each interrupt output signal can be deasserted rather than being driven by the legacy interrupt input. So the wake-event can be used as wakeup signals to SoC (system power controller). To prevent race conditions and ensure proper interrupt routing on Cortex-A15 CPUs when they are power-gated, add a CPU PM notifier call-back to reprogram the GIC CPU interface on PM entry. The GIC CPU interface will be reset back to its normal state by the common GIC CPU PM exit callback when the CPU wakes up. Based on the work by: Scott Williams <scwilliams@nvidia.com> Signed-off-by: Joseph Lo <josephl@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-07-19 17:25:24 +08:00
static void tegra114_gic_cpu_pm_registration(void) { }
#endif
static const struct of_device_id tegra_ictlr_match[] __initconst = {
{ .compatible = "nvidia,tegra20-ictlr" },
{ .compatible = "nvidia,tegra30-ictlr" },
{ }
};
void __init tegra_init_irq(void)
{
if (WARN_ON(!of_find_matching_node(NULL, tegra_ictlr_match)))
pr_warn("Outdated DT detected, suspend/resume will NOT work\n");
ARM: tegra114: Reprogram GIC CPU interface to bypass IRQ on CPU PM entry There is a difference between GICv1 and v2 when CPU in power management mode (aka CPU power down on Tegra). For GICv1, IRQ/FIQ interrupt lines going to CPU are same lines which are also used for wake-interrupt. Therefore, we cannot disable the GIC CPU interface if we need to use same interrupts for CPU wake purpose. This creates a race condition for CPU power off entry. Also, in GICv1, disabling GICv1 CPU interface puts GICv1 into bypass mode such that incoming legacy IRQ/FIQ are sent to CPU, which means disabling GIC CPU interface doesn't really disable IRQ/FIQ to CPU. GICv2 provides a wake IRQ/FIQ (for wake-event purpose), which are not disabled by GIC CPU interface. This is done by adding a bypass override capability when the interrupts are disabled at the CPU interface. To support this, there are four bits about IRQ/FIQ BypassDisable in CPU interface Control Register. When the IRQ/FIQ not being driver by the CPU interface, each interrupt output signal can be deasserted rather than being driven by the legacy interrupt input. So the wake-event can be used as wakeup signals to SoC (system power controller). To prevent race conditions and ensure proper interrupt routing on Cortex-A15 CPUs when they are power-gated, add a CPU PM notifier call-back to reprogram the GIC CPU interface on PM entry. The GIC CPU interface will be reset back to its normal state by the common GIC CPU PM exit callback when the CPU wakes up. Based on the work by: Scott Williams <scwilliams@nvidia.com> Signed-off-by: Joseph Lo <josephl@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-07-19 17:25:24 +08:00
tegra114_gic_cpu_pm_registration();
}