pipe: Add general notification queue support
Make it possible to have a general notification queue built on top of a
standard pipe. Notifications are 'spliced' into the pipe and then read
out. splice(), vmsplice() and sendfile() are forbidden on pipes used for
notifications as post_one_notification() cannot take pipe->mutex. This
means that notifications could be posted in between individual pipe
buffers, making iov_iter_revert() difficult to effect.
The way the notification queue is used is:
(1) An application opens a pipe with a special flag and indicates the
number of messages it wishes to be able to queue at once (this can
only be set once):
pipe2(fds, O_NOTIFICATION_PIPE);
ioctl(fds[0], IOC_WATCH_QUEUE_SET_SIZE, queue_depth);
(2) The application then uses poll() and read() as normal to extract data
from the pipe. read() will return multiple notifications if the
buffer is big enough, but it will not split a notification across
buffers - rather it will return a short read or EMSGSIZE.
Notification messages include a length in the header so that the
caller can split them up.
Each message has a header that describes it:
struct watch_notification {
__u32 type:24;
__u32 subtype:8;
__u32 info;
};
The type indicates the source (eg. mount tree changes, superblock events,
keyring changes, block layer events) and the subtype indicates the event
type (eg. mount, unmount; EIO, EDQUOT; link, unlink). The info field
indicates a number of things, including the entry length, an ID assigned to
a watchpoint contributing to this buffer and type-specific flags.
Supplementary data, such as the key ID that generated an event, can be
attached in additional slots. The maximum message size is 127 bytes.
Messages may not be padded or aligned, so there is no guarantee, for
example, that the notification type will be on a 4-byte bounary.
Signed-off-by: David Howells <dhowells@redhat.com>
2020-01-15 01:07:11 +08:00
|
|
|
// SPDX-License-Identifier: GPL-2.0
|
|
|
|
/* Watch queue and general notification mechanism, built on pipes
|
|
|
|
*
|
|
|
|
* Copyright (C) 2020 Red Hat, Inc. All Rights Reserved.
|
|
|
|
* Written by David Howells (dhowells@redhat.com)
|
|
|
|
*
|
|
|
|
* See Documentation/watch_queue.rst
|
|
|
|
*/
|
|
|
|
|
|
|
|
#define pr_fmt(fmt) "watchq: " fmt
|
|
|
|
#include <linux/module.h>
|
|
|
|
#include <linux/init.h>
|
|
|
|
#include <linux/sched.h>
|
|
|
|
#include <linux/slab.h>
|
|
|
|
#include <linux/printk.h>
|
|
|
|
#include <linux/miscdevice.h>
|
|
|
|
#include <linux/fs.h>
|
|
|
|
#include <linux/mm.h>
|
|
|
|
#include <linux/pagemap.h>
|
|
|
|
#include <linux/poll.h>
|
|
|
|
#include <linux/uaccess.h>
|
|
|
|
#include <linux/vmalloc.h>
|
|
|
|
#include <linux/file.h>
|
|
|
|
#include <linux/security.h>
|
|
|
|
#include <linux/cred.h>
|
|
|
|
#include <linux/sched/signal.h>
|
|
|
|
#include <linux/watch_queue.h>
|
|
|
|
#include <linux/pipe_fs_i.h>
|
|
|
|
|
|
|
|
MODULE_DESCRIPTION("Watch queue");
|
|
|
|
MODULE_AUTHOR("Red Hat, Inc.");
|
|
|
|
MODULE_LICENSE("GPL");
|
|
|
|
|
|
|
|
#define WATCH_QUEUE_NOTE_SIZE 128
|
|
|
|
#define WATCH_QUEUE_NOTES_PER_PAGE (PAGE_SIZE / WATCH_QUEUE_NOTE_SIZE)
|
|
|
|
|
|
|
|
static void watch_queue_pipe_buf_release(struct pipe_inode_info *pipe,
|
|
|
|
struct pipe_buffer *buf)
|
|
|
|
{
|
|
|
|
struct watch_queue *wqueue = (struct watch_queue *)buf->private;
|
|
|
|
struct page *page;
|
|
|
|
unsigned int bit;
|
|
|
|
|
|
|
|
/* We need to work out which note within the page this refers to, but
|
|
|
|
* the note might have been maximum size, so merely ANDing the offset
|
|
|
|
* off doesn't work. OTOH, the note must've been more than zero size.
|
|
|
|
*/
|
|
|
|
bit = buf->offset + buf->len;
|
|
|
|
if ((bit & (WATCH_QUEUE_NOTE_SIZE - 1)) == 0)
|
|
|
|
bit -= WATCH_QUEUE_NOTE_SIZE;
|
|
|
|
bit /= WATCH_QUEUE_NOTE_SIZE;
|
|
|
|
|
|
|
|
page = buf->page;
|
|
|
|
bit += page->index;
|
|
|
|
|
|
|
|
set_bit(bit, wqueue->notes_bitmap);
|
|
|
|
}
|
|
|
|
|
Notifications over pipes + Keyring notifications
-----BEGIN PGP SIGNATURE-----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=YTGf
-----END PGP SIGNATURE-----
Merge tag 'notifications-20200601' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs
Pull notification queue from David Howells:
"This adds a general notification queue concept and adds an event
source for keys/keyrings, such as linking and unlinking keys and
changing their attributes.
Thanks to Debarshi Ray, we do have a pull request to use this to fix a
problem with gnome-online-accounts - as mentioned last time:
https://gitlab.gnome.org/GNOME/gnome-online-accounts/merge_requests/47
Without this, g-o-a has to constantly poll a keyring-based kerberos
cache to find out if kinit has changed anything.
[ There are other notification pending: mount/sb fsinfo notifications
for libmount that Karel Zak and Ian Kent have been working on, and
Christian Brauner would like to use them in lxc, but let's see how
this one works first ]
LSM hooks are included:
- A set of hooks are provided that allow an LSM to rule on whether or
not a watch may be set. Each of these hooks takes a different
"watched object" parameter, so they're not really shareable. The
LSM should use current's credentials. [Wanted by SELinux & Smack]
- A hook is provided to allow an LSM to rule on whether or not a
particular message may be posted to a particular queue. This is
given the credentials from the event generator (which may be the
system) and the watch setter. [Wanted by Smack]
I've provided SELinux and Smack with implementations of some of these
hooks.
WHY
===
Key/keyring notifications are desirable because if you have your
kerberos tickets in a file/directory, your Gnome desktop will monitor
that using something like fanotify and tell you if your credentials
cache changes.
However, we also have the ability to cache your kerberos tickets in
the session, user or persistent keyring so that it isn't left around
on disk across a reboot or logout. Keyrings, however, cannot currently
be monitored asynchronously, so the desktop has to poll for it - not
so good on a laptop. This facility will allow the desktop to avoid the
need to poll.
DESIGN DECISIONS
================
- The notification queue is built on top of a standard pipe. Messages
are effectively spliced in. The pipe is opened with a special flag:
pipe2(fds, O_NOTIFICATION_PIPE);
The special flag has the same value as O_EXCL (which doesn't seem
like it will ever be applicable in this context)[?]. It is given up
front to make it a lot easier to prohibit splice&co from accessing
the pipe.
[?] Should this be done some other way? I'd rather not use up a new
O_* flag if I can avoid it - should I add a pipe3() system call
instead?
The pipe is then configured::
ioctl(fds[1], IOC_WATCH_QUEUE_SET_SIZE, queue_depth);
ioctl(fds[1], IOC_WATCH_QUEUE_SET_FILTER, &filter);
Messages are then read out of the pipe using read().
- It should be possible to allow write() to insert data into the
notification pipes too, but this is currently disabled as the
kernel has to be able to insert messages into the pipe *without*
holding pipe->mutex and the code to make this work needs careful
auditing.
- sendfile(), splice() and vmsplice() are disabled on notification
pipes because of the pipe->mutex issue and also because they
sometimes want to revert what they just did - but one or more
notification messages might've been interleaved in the ring.
- The kernel inserts messages with the wait queue spinlock held. This
means that pipe_read() and pipe_write() have to take the spinlock
to update the queue pointers.
- Records in the buffer are binary, typed and have a length so that
they can be of varying size.
This allows multiple heterogeneous sources to share a common
buffer; there are 16 million types available, of which I've used
just a few, so there is scope for others to be used. Tags may be
specified when a watchpoint is created to help distinguish the
sources.
- Records are filterable as types have up to 256 subtypes that can be
individually filtered. Other filtration is also available.
- Notification pipes don't interfere with each other; each may be
bound to a different set of watches. Any particular notification
will be copied to all the queues that are currently watching for it
- and only those that are watching for it.
- When recording a notification, the kernel will not sleep, but will
rather mark a queue as having lost a message if there's
insufficient space. read() will fabricate a loss notification
message at an appropriate point later.
- The notification pipe is created and then watchpoints are attached
to it, using one of:
keyctl_watch_key(KEY_SPEC_SESSION_KEYRING, fds[1], 0x01);
watch_mount(AT_FDCWD, "/", 0, fd, 0x02);
watch_sb(AT_FDCWD, "/mnt", 0, fd, 0x03);
where in both cases, fd indicates the queue and the number after is
a tag between 0 and 255.
- Watches are removed if either the notification pipe is destroyed or
the watched object is destroyed. In the latter case, a message will
be generated indicating the enforced watch removal.
Things I want to avoid:
- Introducing features that make the core VFS dependent on the
network stack or networking namespaces (ie. usage of netlink).
- Dumping all this stuff into dmesg and having a daemon that sits
there parsing the output and distributing it as this then puts the
responsibility for security into userspace and makes handling
namespaces tricky. Further, dmesg might not exist or might be
inaccessible inside a container.
- Letting users see events they shouldn't be able to see.
TESTING AND MANPAGES
====================
- The keyutils tree has a pipe-watch branch that has keyctl commands
for making use of notifications. Proposed manual pages can also be
found on this branch, though a couple of them really need to go to
the main manpages repository instead.
If the kernel supports the watching of keys, then running "make
test" on that branch will cause the testing infrastructure to spawn
a monitoring process on the side that monitors a notifications pipe
for all the key/keyring changes induced by the tests and they'll
all be checked off to make sure they happened.
https://git.kernel.org/pub/scm/linux/kernel/git/dhowells/keyutils.git/log/?h=pipe-watch
- A test program is provided (samples/watch_queue/watch_test) that
can be used to monitor for keyrings, mount and superblock events.
Information on the notifications is simply logged to stdout"
* tag 'notifications-20200601' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs:
smack: Implement the watch_key and post_notification hooks
selinux: Implement the watch_key security hook
keys: Make the KEY_NEED_* perms an enum rather than a mask
pipe: Add notification lossage handling
pipe: Allow buffers to be marked read-whole-or-error for notifications
Add sample notification program
watch_queue: Add a key/keyring notification facility
security: Add hooks to rule on setting a watch
pipe: Add general notification queue support
pipe: Add O_NOTIFICATION_PIPE
security: Add a hook for the point of notification insertion
uapi: General notification queue definitions
2020-06-14 00:56:21 +08:00
|
|
|
// No try_steal function => no stealing
|
|
|
|
#define watch_queue_pipe_buf_try_steal NULL
|
pipe: Add general notification queue support
Make it possible to have a general notification queue built on top of a
standard pipe. Notifications are 'spliced' into the pipe and then read
out. splice(), vmsplice() and sendfile() are forbidden on pipes used for
notifications as post_one_notification() cannot take pipe->mutex. This
means that notifications could be posted in between individual pipe
buffers, making iov_iter_revert() difficult to effect.
The way the notification queue is used is:
(1) An application opens a pipe with a special flag and indicates the
number of messages it wishes to be able to queue at once (this can
only be set once):
pipe2(fds, O_NOTIFICATION_PIPE);
ioctl(fds[0], IOC_WATCH_QUEUE_SET_SIZE, queue_depth);
(2) The application then uses poll() and read() as normal to extract data
from the pipe. read() will return multiple notifications if the
buffer is big enough, but it will not split a notification across
buffers - rather it will return a short read or EMSGSIZE.
Notification messages include a length in the header so that the
caller can split them up.
Each message has a header that describes it:
struct watch_notification {
__u32 type:24;
__u32 subtype:8;
__u32 info;
};
The type indicates the source (eg. mount tree changes, superblock events,
keyring changes, block layer events) and the subtype indicates the event
type (eg. mount, unmount; EIO, EDQUOT; link, unlink). The info field
indicates a number of things, including the entry length, an ID assigned to
a watchpoint contributing to this buffer and type-specific flags.
Supplementary data, such as the key ID that generated an event, can be
attached in additional slots. The maximum message size is 127 bytes.
Messages may not be padded or aligned, so there is no guarantee, for
example, that the notification type will be on a 4-byte bounary.
Signed-off-by: David Howells <dhowells@redhat.com>
2020-01-15 01:07:11 +08:00
|
|
|
|
|
|
|
/* New data written to a pipe may be appended to a buffer with this type. */
|
|
|
|
static const struct pipe_buf_operations watch_queue_pipe_buf_ops = {
|
|
|
|
.release = watch_queue_pipe_buf_release,
|
Notifications over pipes + Keyring notifications
-----BEGIN PGP SIGNATURE-----
iQIzBAABCAAdFiEEqG5UsNXhtOCrfGQP+7dXa6fLC2sFAl7U/i8ACgkQ+7dXa6fL
C2u2eg/+Oy6ybq0hPovYVkFI9WIG7ZCz7w9Q6BEnfYMqqn3dnfJxKQ3l4pnQEOWw
f4QfvpvevsYfMtOJkYcG6s66rQgbFdqc5TEyBBy0QNp3acRolN7IXkcopvv9xOpQ
JxedpbFG1PTFLWjvBpyjlrUPouwLzq2FXAf1Ox0ZIMw6165mYOMWoli1VL8dh0A0
Ai7JUB0WrvTNbrwhV413obIzXT/rPCdcrgbQcgrrLPex8lQ47ZAE9bq6k4q5HiwK
KRzEqkQgnzId6cCNTFBfkTWsx89zZunz7jkfM5yx30MvdAtPSxvvpfIPdZRZkXsP
E2K9Fk1/6OQZTC0Op3Pi/bt+hVG/mD1p0sQUDgo2MO3qlSS+5mMkR8h3mJEgwK12
72P4YfOJkuAy2z3v4lL0GYdUDAZY6i6G8TMxERKu/a9O3VjTWICDOyBUS6F8YEAK
C7HlbZxAEOKTVK0BTDTeEUBwSeDrBbvH6MnRlZCG5g1Fos2aWP0udhjiX8IfZLO7
GN6nWBvK1fYzfsUczdhgnoCzQs3suoDo04HnsTPGJ8De52T4x2RsjV+gPx0nrNAq
eWChl1JvMWsY2B3GLnl9XQz4NNN+EreKEkk+PULDGllrArrPsp5Vnhb9FJO1PVCU
hMDJHohPiXnKbc8f4Bd78OhIvnuoGfJPdM5MtNe2flUKy2a2ops=
=YTGf
-----END PGP SIGNATURE-----
Merge tag 'notifications-20200601' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs
Pull notification queue from David Howells:
"This adds a general notification queue concept and adds an event
source for keys/keyrings, such as linking and unlinking keys and
changing their attributes.
Thanks to Debarshi Ray, we do have a pull request to use this to fix a
problem with gnome-online-accounts - as mentioned last time:
https://gitlab.gnome.org/GNOME/gnome-online-accounts/merge_requests/47
Without this, g-o-a has to constantly poll a keyring-based kerberos
cache to find out if kinit has changed anything.
[ There are other notification pending: mount/sb fsinfo notifications
for libmount that Karel Zak and Ian Kent have been working on, and
Christian Brauner would like to use them in lxc, but let's see how
this one works first ]
LSM hooks are included:
- A set of hooks are provided that allow an LSM to rule on whether or
not a watch may be set. Each of these hooks takes a different
"watched object" parameter, so they're not really shareable. The
LSM should use current's credentials. [Wanted by SELinux & Smack]
- A hook is provided to allow an LSM to rule on whether or not a
particular message may be posted to a particular queue. This is
given the credentials from the event generator (which may be the
system) and the watch setter. [Wanted by Smack]
I've provided SELinux and Smack with implementations of some of these
hooks.
WHY
===
Key/keyring notifications are desirable because if you have your
kerberos tickets in a file/directory, your Gnome desktop will monitor
that using something like fanotify and tell you if your credentials
cache changes.
However, we also have the ability to cache your kerberos tickets in
the session, user or persistent keyring so that it isn't left around
on disk across a reboot or logout. Keyrings, however, cannot currently
be monitored asynchronously, so the desktop has to poll for it - not
so good on a laptop. This facility will allow the desktop to avoid the
need to poll.
DESIGN DECISIONS
================
- The notification queue is built on top of a standard pipe. Messages
are effectively spliced in. The pipe is opened with a special flag:
pipe2(fds, O_NOTIFICATION_PIPE);
The special flag has the same value as O_EXCL (which doesn't seem
like it will ever be applicable in this context)[?]. It is given up
front to make it a lot easier to prohibit splice&co from accessing
the pipe.
[?] Should this be done some other way? I'd rather not use up a new
O_* flag if I can avoid it - should I add a pipe3() system call
instead?
The pipe is then configured::
ioctl(fds[1], IOC_WATCH_QUEUE_SET_SIZE, queue_depth);
ioctl(fds[1], IOC_WATCH_QUEUE_SET_FILTER, &filter);
Messages are then read out of the pipe using read().
- It should be possible to allow write() to insert data into the
notification pipes too, but this is currently disabled as the
kernel has to be able to insert messages into the pipe *without*
holding pipe->mutex and the code to make this work needs careful
auditing.
- sendfile(), splice() and vmsplice() are disabled on notification
pipes because of the pipe->mutex issue and also because they
sometimes want to revert what they just did - but one or more
notification messages might've been interleaved in the ring.
- The kernel inserts messages with the wait queue spinlock held. This
means that pipe_read() and pipe_write() have to take the spinlock
to update the queue pointers.
- Records in the buffer are binary, typed and have a length so that
they can be of varying size.
This allows multiple heterogeneous sources to share a common
buffer; there are 16 million types available, of which I've used
just a few, so there is scope for others to be used. Tags may be
specified when a watchpoint is created to help distinguish the
sources.
- Records are filterable as types have up to 256 subtypes that can be
individually filtered. Other filtration is also available.
- Notification pipes don't interfere with each other; each may be
bound to a different set of watches. Any particular notification
will be copied to all the queues that are currently watching for it
- and only those that are watching for it.
- When recording a notification, the kernel will not sleep, but will
rather mark a queue as having lost a message if there's
insufficient space. read() will fabricate a loss notification
message at an appropriate point later.
- The notification pipe is created and then watchpoints are attached
to it, using one of:
keyctl_watch_key(KEY_SPEC_SESSION_KEYRING, fds[1], 0x01);
watch_mount(AT_FDCWD, "/", 0, fd, 0x02);
watch_sb(AT_FDCWD, "/mnt", 0, fd, 0x03);
where in both cases, fd indicates the queue and the number after is
a tag between 0 and 255.
- Watches are removed if either the notification pipe is destroyed or
the watched object is destroyed. In the latter case, a message will
be generated indicating the enforced watch removal.
Things I want to avoid:
- Introducing features that make the core VFS dependent on the
network stack or networking namespaces (ie. usage of netlink).
- Dumping all this stuff into dmesg and having a daemon that sits
there parsing the output and distributing it as this then puts the
responsibility for security into userspace and makes handling
namespaces tricky. Further, dmesg might not exist or might be
inaccessible inside a container.
- Letting users see events they shouldn't be able to see.
TESTING AND MANPAGES
====================
- The keyutils tree has a pipe-watch branch that has keyctl commands
for making use of notifications. Proposed manual pages can also be
found on this branch, though a couple of them really need to go to
the main manpages repository instead.
If the kernel supports the watching of keys, then running "make
test" on that branch will cause the testing infrastructure to spawn
a monitoring process on the side that monitors a notifications pipe
for all the key/keyring changes induced by the tests and they'll
all be checked off to make sure they happened.
https://git.kernel.org/pub/scm/linux/kernel/git/dhowells/keyutils.git/log/?h=pipe-watch
- A test program is provided (samples/watch_queue/watch_test) that
can be used to monitor for keyrings, mount and superblock events.
Information on the notifications is simply logged to stdout"
* tag 'notifications-20200601' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs:
smack: Implement the watch_key and post_notification hooks
selinux: Implement the watch_key security hook
keys: Make the KEY_NEED_* perms an enum rather than a mask
pipe: Add notification lossage handling
pipe: Allow buffers to be marked read-whole-or-error for notifications
Add sample notification program
watch_queue: Add a key/keyring notification facility
security: Add hooks to rule on setting a watch
pipe: Add general notification queue support
pipe: Add O_NOTIFICATION_PIPE
security: Add a hook for the point of notification insertion
uapi: General notification queue definitions
2020-06-14 00:56:21 +08:00
|
|
|
.try_steal = watch_queue_pipe_buf_try_steal,
|
pipe: Add general notification queue support
Make it possible to have a general notification queue built on top of a
standard pipe. Notifications are 'spliced' into the pipe and then read
out. splice(), vmsplice() and sendfile() are forbidden on pipes used for
notifications as post_one_notification() cannot take pipe->mutex. This
means that notifications could be posted in between individual pipe
buffers, making iov_iter_revert() difficult to effect.
The way the notification queue is used is:
(1) An application opens a pipe with a special flag and indicates the
number of messages it wishes to be able to queue at once (this can
only be set once):
pipe2(fds, O_NOTIFICATION_PIPE);
ioctl(fds[0], IOC_WATCH_QUEUE_SET_SIZE, queue_depth);
(2) The application then uses poll() and read() as normal to extract data
from the pipe. read() will return multiple notifications if the
buffer is big enough, but it will not split a notification across
buffers - rather it will return a short read or EMSGSIZE.
Notification messages include a length in the header so that the
caller can split them up.
Each message has a header that describes it:
struct watch_notification {
__u32 type:24;
__u32 subtype:8;
__u32 info;
};
The type indicates the source (eg. mount tree changes, superblock events,
keyring changes, block layer events) and the subtype indicates the event
type (eg. mount, unmount; EIO, EDQUOT; link, unlink). The info field
indicates a number of things, including the entry length, an ID assigned to
a watchpoint contributing to this buffer and type-specific flags.
Supplementary data, such as the key ID that generated an event, can be
attached in additional slots. The maximum message size is 127 bytes.
Messages may not be padded or aligned, so there is no guarantee, for
example, that the notification type will be on a 4-byte bounary.
Signed-off-by: David Howells <dhowells@redhat.com>
2020-01-15 01:07:11 +08:00
|
|
|
.get = generic_pipe_buf_get,
|
|
|
|
};
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Post a notification to a watch queue.
|
|
|
|
*/
|
|
|
|
static bool post_one_notification(struct watch_queue *wqueue,
|
|
|
|
struct watch_notification *n)
|
|
|
|
{
|
|
|
|
void *p;
|
|
|
|
struct pipe_inode_info *pipe = wqueue->pipe;
|
|
|
|
struct pipe_buffer *buf;
|
|
|
|
struct page *page;
|
|
|
|
unsigned int head, tail, mask, note, offset, len;
|
|
|
|
bool done = false;
|
|
|
|
|
|
|
|
if (!pipe)
|
|
|
|
return false;
|
|
|
|
|
|
|
|
spin_lock_irq(&pipe->rd_wait.lock);
|
|
|
|
|
|
|
|
if (wqueue->defunct)
|
|
|
|
goto out;
|
|
|
|
|
|
|
|
mask = pipe->ring_size - 1;
|
|
|
|
head = pipe->head;
|
|
|
|
tail = pipe->tail;
|
|
|
|
if (pipe_full(head, tail, pipe->ring_size))
|
|
|
|
goto lost;
|
|
|
|
|
|
|
|
note = find_first_bit(wqueue->notes_bitmap, wqueue->nr_notes);
|
|
|
|
if (note >= wqueue->nr_notes)
|
|
|
|
goto lost;
|
|
|
|
|
|
|
|
page = wqueue->notes[note / WATCH_QUEUE_NOTES_PER_PAGE];
|
|
|
|
offset = note % WATCH_QUEUE_NOTES_PER_PAGE * WATCH_QUEUE_NOTE_SIZE;
|
|
|
|
get_page(page);
|
|
|
|
len = n->info & WATCH_INFO_LENGTH;
|
|
|
|
p = kmap_atomic(page);
|
|
|
|
memcpy(p + offset, n, len);
|
|
|
|
kunmap_atomic(p);
|
|
|
|
|
|
|
|
buf = &pipe->bufs[head & mask];
|
|
|
|
buf->page = page;
|
|
|
|
buf->private = (unsigned long)wqueue;
|
|
|
|
buf->ops = &watch_queue_pipe_buf_ops;
|
|
|
|
buf->offset = offset;
|
|
|
|
buf->len = len;
|
2020-01-15 01:07:11 +08:00
|
|
|
buf->flags = PIPE_BUF_FLAG_WHOLE;
|
pipe: Add general notification queue support
Make it possible to have a general notification queue built on top of a
standard pipe. Notifications are 'spliced' into the pipe and then read
out. splice(), vmsplice() and sendfile() are forbidden on pipes used for
notifications as post_one_notification() cannot take pipe->mutex. This
means that notifications could be posted in between individual pipe
buffers, making iov_iter_revert() difficult to effect.
The way the notification queue is used is:
(1) An application opens a pipe with a special flag and indicates the
number of messages it wishes to be able to queue at once (this can
only be set once):
pipe2(fds, O_NOTIFICATION_PIPE);
ioctl(fds[0], IOC_WATCH_QUEUE_SET_SIZE, queue_depth);
(2) The application then uses poll() and read() as normal to extract data
from the pipe. read() will return multiple notifications if the
buffer is big enough, but it will not split a notification across
buffers - rather it will return a short read or EMSGSIZE.
Notification messages include a length in the header so that the
caller can split them up.
Each message has a header that describes it:
struct watch_notification {
__u32 type:24;
__u32 subtype:8;
__u32 info;
};
The type indicates the source (eg. mount tree changes, superblock events,
keyring changes, block layer events) and the subtype indicates the event
type (eg. mount, unmount; EIO, EDQUOT; link, unlink). The info field
indicates a number of things, including the entry length, an ID assigned to
a watchpoint contributing to this buffer and type-specific flags.
Supplementary data, such as the key ID that generated an event, can be
attached in additional slots. The maximum message size is 127 bytes.
Messages may not be padded or aligned, so there is no guarantee, for
example, that the notification type will be on a 4-byte bounary.
Signed-off-by: David Howells <dhowells@redhat.com>
2020-01-15 01:07:11 +08:00
|
|
|
pipe->head = head + 1;
|
|
|
|
|
|
|
|
if (!test_and_clear_bit(note, wqueue->notes_bitmap)) {
|
|
|
|
spin_unlock_irq(&pipe->rd_wait.lock);
|
|
|
|
BUG();
|
|
|
|
}
|
|
|
|
wake_up_interruptible_sync_poll_locked(&pipe->rd_wait, EPOLLIN | EPOLLRDNORM);
|
|
|
|
done = true;
|
|
|
|
|
|
|
|
out:
|
|
|
|
spin_unlock_irq(&pipe->rd_wait.lock);
|
|
|
|
if (done)
|
|
|
|
kill_fasync(&pipe->fasync_readers, SIGIO, POLL_IN);
|
|
|
|
return done;
|
|
|
|
|
|
|
|
lost:
|
2020-01-15 01:07:12 +08:00
|
|
|
buf = &pipe->bufs[(head - 1) & mask];
|
|
|
|
buf->flags |= PIPE_BUF_FLAG_LOSS;
|
pipe: Add general notification queue support
Make it possible to have a general notification queue built on top of a
standard pipe. Notifications are 'spliced' into the pipe and then read
out. splice(), vmsplice() and sendfile() are forbidden on pipes used for
notifications as post_one_notification() cannot take pipe->mutex. This
means that notifications could be posted in between individual pipe
buffers, making iov_iter_revert() difficult to effect.
The way the notification queue is used is:
(1) An application opens a pipe with a special flag and indicates the
number of messages it wishes to be able to queue at once (this can
only be set once):
pipe2(fds, O_NOTIFICATION_PIPE);
ioctl(fds[0], IOC_WATCH_QUEUE_SET_SIZE, queue_depth);
(2) The application then uses poll() and read() as normal to extract data
from the pipe. read() will return multiple notifications if the
buffer is big enough, but it will not split a notification across
buffers - rather it will return a short read or EMSGSIZE.
Notification messages include a length in the header so that the
caller can split them up.
Each message has a header that describes it:
struct watch_notification {
__u32 type:24;
__u32 subtype:8;
__u32 info;
};
The type indicates the source (eg. mount tree changes, superblock events,
keyring changes, block layer events) and the subtype indicates the event
type (eg. mount, unmount; EIO, EDQUOT; link, unlink). The info field
indicates a number of things, including the entry length, an ID assigned to
a watchpoint contributing to this buffer and type-specific flags.
Supplementary data, such as the key ID that generated an event, can be
attached in additional slots. The maximum message size is 127 bytes.
Messages may not be padded or aligned, so there is no guarantee, for
example, that the notification type will be on a 4-byte bounary.
Signed-off-by: David Howells <dhowells@redhat.com>
2020-01-15 01:07:11 +08:00
|
|
|
goto out;
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Apply filter rules to a notification.
|
|
|
|
*/
|
|
|
|
static bool filter_watch_notification(const struct watch_filter *wf,
|
|
|
|
const struct watch_notification *n)
|
|
|
|
{
|
|
|
|
const struct watch_type_filter *wt;
|
|
|
|
unsigned int st_bits = sizeof(wt->subtype_filter[0]) * 8;
|
|
|
|
unsigned int st_index = n->subtype / st_bits;
|
|
|
|
unsigned int st_bit = 1U << (n->subtype % st_bits);
|
|
|
|
int i;
|
|
|
|
|
|
|
|
if (!test_bit(n->type, wf->type_filter))
|
|
|
|
return false;
|
|
|
|
|
|
|
|
for (i = 0; i < wf->nr_filters; i++) {
|
|
|
|
wt = &wf->filters[i];
|
|
|
|
if (n->type == wt->type &&
|
|
|
|
(wt->subtype_filter[st_index] & st_bit) &&
|
|
|
|
(n->info & wt->info_mask) == wt->info_filter)
|
|
|
|
return true;
|
|
|
|
}
|
|
|
|
|
|
|
|
return false; /* If there is a filter, the default is to reject. */
|
|
|
|
}
|
|
|
|
|
|
|
|
/**
|
|
|
|
* __post_watch_notification - Post an event notification
|
|
|
|
* @wlist: The watch list to post the event to.
|
|
|
|
* @n: The notification record to post.
|
|
|
|
* @cred: The creds of the process that triggered the notification.
|
|
|
|
* @id: The ID to match on the watch.
|
|
|
|
*
|
|
|
|
* Post a notification of an event into a set of watch queues and let the users
|
|
|
|
* know.
|
|
|
|
*
|
|
|
|
* The size of the notification should be set in n->info & WATCH_INFO_LENGTH and
|
|
|
|
* should be in units of sizeof(*n).
|
|
|
|
*/
|
|
|
|
void __post_watch_notification(struct watch_list *wlist,
|
|
|
|
struct watch_notification *n,
|
|
|
|
const struct cred *cred,
|
|
|
|
u64 id)
|
|
|
|
{
|
|
|
|
const struct watch_filter *wf;
|
|
|
|
struct watch_queue *wqueue;
|
|
|
|
struct watch *watch;
|
|
|
|
|
|
|
|
if (((n->info & WATCH_INFO_LENGTH) >> WATCH_INFO_LENGTH__SHIFT) == 0) {
|
|
|
|
WARN_ON(1);
|
|
|
|
return;
|
|
|
|
}
|
|
|
|
|
|
|
|
rcu_read_lock();
|
|
|
|
|
|
|
|
hlist_for_each_entry_rcu(watch, &wlist->watchers, list_node) {
|
|
|
|
if (watch->id != id)
|
|
|
|
continue;
|
|
|
|
n->info &= ~WATCH_INFO_ID;
|
|
|
|
n->info |= watch->info_id;
|
|
|
|
|
|
|
|
wqueue = rcu_dereference(watch->queue);
|
|
|
|
wf = rcu_dereference(wqueue->filter);
|
|
|
|
if (wf && !filter_watch_notification(wf, n))
|
|
|
|
continue;
|
|
|
|
|
|
|
|
if (security_post_notification(watch->cred, cred, n) < 0)
|
|
|
|
continue;
|
|
|
|
|
|
|
|
post_one_notification(wqueue, n);
|
|
|
|
}
|
|
|
|
|
|
|
|
rcu_read_unlock();
|
|
|
|
}
|
|
|
|
EXPORT_SYMBOL(__post_watch_notification);
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Allocate sufficient pages to preallocation for the requested number of
|
|
|
|
* notifications.
|
|
|
|
*/
|
|
|
|
long watch_queue_set_size(struct pipe_inode_info *pipe, unsigned int nr_notes)
|
|
|
|
{
|
|
|
|
struct watch_queue *wqueue = pipe->watch_queue;
|
|
|
|
struct page **pages;
|
|
|
|
unsigned long *bitmap;
|
|
|
|
unsigned long user_bufs;
|
|
|
|
unsigned int bmsize;
|
|
|
|
int ret, i, nr_pages;
|
|
|
|
|
|
|
|
if (!wqueue)
|
|
|
|
return -ENODEV;
|
|
|
|
if (wqueue->notes)
|
|
|
|
return -EBUSY;
|
|
|
|
|
|
|
|
if (nr_notes < 1 ||
|
|
|
|
nr_notes > 512) /* TODO: choose a better hard limit */
|
|
|
|
return -EINVAL;
|
|
|
|
|
|
|
|
nr_pages = (nr_notes + WATCH_QUEUE_NOTES_PER_PAGE - 1);
|
|
|
|
nr_pages /= WATCH_QUEUE_NOTES_PER_PAGE;
|
|
|
|
user_bufs = account_pipe_buffers(pipe->user, pipe->nr_accounted, nr_pages);
|
|
|
|
|
|
|
|
if (nr_pages > pipe->max_usage &&
|
|
|
|
(too_many_pipe_buffers_hard(user_bufs) ||
|
|
|
|
too_many_pipe_buffers_soft(user_bufs)) &&
|
|
|
|
pipe_is_unprivileged_user()) {
|
|
|
|
ret = -EPERM;
|
|
|
|
goto error;
|
|
|
|
}
|
|
|
|
|
|
|
|
ret = pipe_resize_ring(pipe, nr_notes);
|
|
|
|
if (ret < 0)
|
|
|
|
goto error;
|
|
|
|
|
|
|
|
pages = kcalloc(sizeof(struct page *), nr_pages, GFP_KERNEL);
|
|
|
|
if (!pages)
|
|
|
|
goto error;
|
|
|
|
|
|
|
|
for (i = 0; i < nr_pages; i++) {
|
|
|
|
pages[i] = alloc_page(GFP_KERNEL);
|
|
|
|
if (!pages[i])
|
|
|
|
goto error_p;
|
|
|
|
pages[i]->index = i * WATCH_QUEUE_NOTES_PER_PAGE;
|
|
|
|
}
|
|
|
|
|
|
|
|
bmsize = (nr_notes + BITS_PER_LONG - 1) / BITS_PER_LONG;
|
|
|
|
bmsize *= sizeof(unsigned long);
|
|
|
|
bitmap = kmalloc(bmsize, GFP_KERNEL);
|
|
|
|
if (!bitmap)
|
|
|
|
goto error_p;
|
|
|
|
|
|
|
|
memset(bitmap, 0xff, bmsize);
|
|
|
|
wqueue->notes = pages;
|
|
|
|
wqueue->notes_bitmap = bitmap;
|
|
|
|
wqueue->nr_pages = nr_pages;
|
|
|
|
wqueue->nr_notes = nr_pages * WATCH_QUEUE_NOTES_PER_PAGE;
|
|
|
|
return 0;
|
|
|
|
|
|
|
|
error_p:
|
|
|
|
for (i = 0; i < nr_pages; i++)
|
|
|
|
__free_page(pages[i]);
|
|
|
|
kfree(pages);
|
|
|
|
error:
|
|
|
|
(void) account_pipe_buffers(pipe->user, nr_pages, pipe->nr_accounted);
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Set the filter on a watch queue.
|
|
|
|
*/
|
|
|
|
long watch_queue_set_filter(struct pipe_inode_info *pipe,
|
|
|
|
struct watch_notification_filter __user *_filter)
|
|
|
|
{
|
|
|
|
struct watch_notification_type_filter *tf;
|
|
|
|
struct watch_notification_filter filter;
|
|
|
|
struct watch_type_filter *q;
|
|
|
|
struct watch_filter *wfilter;
|
|
|
|
struct watch_queue *wqueue = pipe->watch_queue;
|
|
|
|
int ret, nr_filter = 0, i;
|
|
|
|
|
|
|
|
if (!wqueue)
|
|
|
|
return -ENODEV;
|
|
|
|
|
|
|
|
if (!_filter) {
|
|
|
|
/* Remove the old filter */
|
|
|
|
wfilter = NULL;
|
|
|
|
goto set;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* Grab the user's filter specification */
|
|
|
|
if (copy_from_user(&filter, _filter, sizeof(filter)) != 0)
|
|
|
|
return -EFAULT;
|
|
|
|
if (filter.nr_filters == 0 ||
|
|
|
|
filter.nr_filters > 16 ||
|
|
|
|
filter.__reserved != 0)
|
|
|
|
return -EINVAL;
|
|
|
|
|
|
|
|
tf = memdup_user(_filter->filters, filter.nr_filters * sizeof(*tf));
|
|
|
|
if (IS_ERR(tf))
|
|
|
|
return PTR_ERR(tf);
|
|
|
|
|
|
|
|
ret = -EINVAL;
|
|
|
|
for (i = 0; i < filter.nr_filters; i++) {
|
|
|
|
if ((tf[i].info_filter & ~tf[i].info_mask) ||
|
|
|
|
tf[i].info_mask & WATCH_INFO_LENGTH)
|
|
|
|
goto err_filter;
|
|
|
|
/* Ignore any unknown types */
|
|
|
|
if (tf[i].type >= sizeof(wfilter->type_filter) * 8)
|
|
|
|
continue;
|
|
|
|
nr_filter++;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* Now we need to build the internal filter from only the relevant
|
|
|
|
* user-specified filters.
|
|
|
|
*/
|
|
|
|
ret = -ENOMEM;
|
|
|
|
wfilter = kzalloc(struct_size(wfilter, filters, nr_filter), GFP_KERNEL);
|
|
|
|
if (!wfilter)
|
|
|
|
goto err_filter;
|
|
|
|
wfilter->nr_filters = nr_filter;
|
|
|
|
|
|
|
|
q = wfilter->filters;
|
|
|
|
for (i = 0; i < filter.nr_filters; i++) {
|
|
|
|
if (tf[i].type >= sizeof(wfilter->type_filter) * BITS_PER_LONG)
|
|
|
|
continue;
|
|
|
|
|
|
|
|
q->type = tf[i].type;
|
|
|
|
q->info_filter = tf[i].info_filter;
|
|
|
|
q->info_mask = tf[i].info_mask;
|
|
|
|
q->subtype_filter[0] = tf[i].subtype_filter[0];
|
|
|
|
__set_bit(q->type, wfilter->type_filter);
|
|
|
|
q++;
|
|
|
|
}
|
|
|
|
|
|
|
|
kfree(tf);
|
|
|
|
set:
|
|
|
|
pipe_lock(pipe);
|
|
|
|
wfilter = rcu_replace_pointer(wqueue->filter, wfilter,
|
|
|
|
lockdep_is_held(&pipe->mutex));
|
|
|
|
pipe_unlock(pipe);
|
|
|
|
if (wfilter)
|
|
|
|
kfree_rcu(wfilter, rcu);
|
|
|
|
return 0;
|
|
|
|
|
|
|
|
err_filter:
|
|
|
|
kfree(tf);
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
|
|
|
static void __put_watch_queue(struct kref *kref)
|
|
|
|
{
|
|
|
|
struct watch_queue *wqueue =
|
|
|
|
container_of(kref, struct watch_queue, usage);
|
|
|
|
struct watch_filter *wfilter;
|
|
|
|
int i;
|
|
|
|
|
|
|
|
for (i = 0; i < wqueue->nr_pages; i++)
|
|
|
|
__free_page(wqueue->notes[i]);
|
|
|
|
|
|
|
|
wfilter = rcu_access_pointer(wqueue->filter);
|
|
|
|
if (wfilter)
|
|
|
|
kfree_rcu(wfilter, rcu);
|
|
|
|
kfree_rcu(wqueue, rcu);
|
|
|
|
}
|
|
|
|
|
|
|
|
/**
|
|
|
|
* put_watch_queue - Dispose of a ref on a watchqueue.
|
|
|
|
* @wqueue: The watch queue to unref.
|
|
|
|
*/
|
|
|
|
void put_watch_queue(struct watch_queue *wqueue)
|
|
|
|
{
|
|
|
|
kref_put(&wqueue->usage, __put_watch_queue);
|
|
|
|
}
|
|
|
|
EXPORT_SYMBOL(put_watch_queue);
|
|
|
|
|
|
|
|
static void free_watch(struct rcu_head *rcu)
|
|
|
|
{
|
|
|
|
struct watch *watch = container_of(rcu, struct watch, rcu);
|
|
|
|
|
|
|
|
put_watch_queue(rcu_access_pointer(watch->queue));
|
2020-08-17 18:07:28 +08:00
|
|
|
atomic_dec(&watch->cred->user->nr_watches);
|
pipe: Add general notification queue support
Make it possible to have a general notification queue built on top of a
standard pipe. Notifications are 'spliced' into the pipe and then read
out. splice(), vmsplice() and sendfile() are forbidden on pipes used for
notifications as post_one_notification() cannot take pipe->mutex. This
means that notifications could be posted in between individual pipe
buffers, making iov_iter_revert() difficult to effect.
The way the notification queue is used is:
(1) An application opens a pipe with a special flag and indicates the
number of messages it wishes to be able to queue at once (this can
only be set once):
pipe2(fds, O_NOTIFICATION_PIPE);
ioctl(fds[0], IOC_WATCH_QUEUE_SET_SIZE, queue_depth);
(2) The application then uses poll() and read() as normal to extract data
from the pipe. read() will return multiple notifications if the
buffer is big enough, but it will not split a notification across
buffers - rather it will return a short read or EMSGSIZE.
Notification messages include a length in the header so that the
caller can split them up.
Each message has a header that describes it:
struct watch_notification {
__u32 type:24;
__u32 subtype:8;
__u32 info;
};
The type indicates the source (eg. mount tree changes, superblock events,
keyring changes, block layer events) and the subtype indicates the event
type (eg. mount, unmount; EIO, EDQUOT; link, unlink). The info field
indicates a number of things, including the entry length, an ID assigned to
a watchpoint contributing to this buffer and type-specific flags.
Supplementary data, such as the key ID that generated an event, can be
attached in additional slots. The maximum message size is 127 bytes.
Messages may not be padded or aligned, so there is no guarantee, for
example, that the notification type will be on a 4-byte bounary.
Signed-off-by: David Howells <dhowells@redhat.com>
2020-01-15 01:07:11 +08:00
|
|
|
put_cred(watch->cred);
|
|
|
|
}
|
|
|
|
|
|
|
|
static void __put_watch(struct kref *kref)
|
|
|
|
{
|
|
|
|
struct watch *watch = container_of(kref, struct watch, usage);
|
|
|
|
|
|
|
|
call_rcu(&watch->rcu, free_watch);
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Discard a watch.
|
|
|
|
*/
|
|
|
|
static void put_watch(struct watch *watch)
|
|
|
|
{
|
|
|
|
kref_put(&watch->usage, __put_watch);
|
|
|
|
}
|
|
|
|
|
|
|
|
/**
|
2021-01-26 00:14:09 +08:00
|
|
|
* init_watch - Initialise a watch
|
pipe: Add general notification queue support
Make it possible to have a general notification queue built on top of a
standard pipe. Notifications are 'spliced' into the pipe and then read
out. splice(), vmsplice() and sendfile() are forbidden on pipes used for
notifications as post_one_notification() cannot take pipe->mutex. This
means that notifications could be posted in between individual pipe
buffers, making iov_iter_revert() difficult to effect.
The way the notification queue is used is:
(1) An application opens a pipe with a special flag and indicates the
number of messages it wishes to be able to queue at once (this can
only be set once):
pipe2(fds, O_NOTIFICATION_PIPE);
ioctl(fds[0], IOC_WATCH_QUEUE_SET_SIZE, queue_depth);
(2) The application then uses poll() and read() as normal to extract data
from the pipe. read() will return multiple notifications if the
buffer is big enough, but it will not split a notification across
buffers - rather it will return a short read or EMSGSIZE.
Notification messages include a length in the header so that the
caller can split them up.
Each message has a header that describes it:
struct watch_notification {
__u32 type:24;
__u32 subtype:8;
__u32 info;
};
The type indicates the source (eg. mount tree changes, superblock events,
keyring changes, block layer events) and the subtype indicates the event
type (eg. mount, unmount; EIO, EDQUOT; link, unlink). The info field
indicates a number of things, including the entry length, an ID assigned to
a watchpoint contributing to this buffer and type-specific flags.
Supplementary data, such as the key ID that generated an event, can be
attached in additional slots. The maximum message size is 127 bytes.
Messages may not be padded or aligned, so there is no guarantee, for
example, that the notification type will be on a 4-byte bounary.
Signed-off-by: David Howells <dhowells@redhat.com>
2020-01-15 01:07:11 +08:00
|
|
|
* @watch: The watch to initialise.
|
|
|
|
* @wqueue: The queue to assign.
|
|
|
|
*
|
|
|
|
* Initialise a watch and set the watch queue.
|
|
|
|
*/
|
|
|
|
void init_watch(struct watch *watch, struct watch_queue *wqueue)
|
|
|
|
{
|
|
|
|
kref_init(&watch->usage);
|
|
|
|
INIT_HLIST_NODE(&watch->list_node);
|
|
|
|
INIT_HLIST_NODE(&watch->queue_node);
|
|
|
|
rcu_assign_pointer(watch->queue, wqueue);
|
|
|
|
}
|
|
|
|
|
|
|
|
/**
|
|
|
|
* add_watch_to_object - Add a watch on an object to a watch list
|
|
|
|
* @watch: The watch to add
|
|
|
|
* @wlist: The watch list to add to
|
|
|
|
*
|
|
|
|
* @watch->queue must have been set to point to the queue to post notifications
|
|
|
|
* to and the watch list of the object to be watched. @watch->cred must also
|
|
|
|
* have been set to the appropriate credentials and a ref taken on them.
|
|
|
|
*
|
|
|
|
* The caller must pin the queue and the list both and must hold the list
|
|
|
|
* locked against racing watch additions/removals.
|
|
|
|
*/
|
|
|
|
int add_watch_to_object(struct watch *watch, struct watch_list *wlist)
|
|
|
|
{
|
|
|
|
struct watch_queue *wqueue = rcu_access_pointer(watch->queue);
|
|
|
|
struct watch *w;
|
|
|
|
|
|
|
|
hlist_for_each_entry(w, &wlist->watchers, list_node) {
|
|
|
|
struct watch_queue *wq = rcu_access_pointer(w->queue);
|
|
|
|
if (wqueue == wq && watch->id == w->id)
|
|
|
|
return -EBUSY;
|
|
|
|
}
|
|
|
|
|
|
|
|
watch->cred = get_current_cred();
|
|
|
|
rcu_assign_pointer(watch->watch_list, wlist);
|
|
|
|
|
2020-08-17 18:07:28 +08:00
|
|
|
if (atomic_inc_return(&watch->cred->user->nr_watches) >
|
|
|
|
task_rlimit(current, RLIMIT_NOFILE)) {
|
|
|
|
atomic_dec(&watch->cred->user->nr_watches);
|
|
|
|
put_cred(watch->cred);
|
|
|
|
return -EAGAIN;
|
|
|
|
}
|
|
|
|
|
pipe: Add general notification queue support
Make it possible to have a general notification queue built on top of a
standard pipe. Notifications are 'spliced' into the pipe and then read
out. splice(), vmsplice() and sendfile() are forbidden on pipes used for
notifications as post_one_notification() cannot take pipe->mutex. This
means that notifications could be posted in between individual pipe
buffers, making iov_iter_revert() difficult to effect.
The way the notification queue is used is:
(1) An application opens a pipe with a special flag and indicates the
number of messages it wishes to be able to queue at once (this can
only be set once):
pipe2(fds, O_NOTIFICATION_PIPE);
ioctl(fds[0], IOC_WATCH_QUEUE_SET_SIZE, queue_depth);
(2) The application then uses poll() and read() as normal to extract data
from the pipe. read() will return multiple notifications if the
buffer is big enough, but it will not split a notification across
buffers - rather it will return a short read or EMSGSIZE.
Notification messages include a length in the header so that the
caller can split them up.
Each message has a header that describes it:
struct watch_notification {
__u32 type:24;
__u32 subtype:8;
__u32 info;
};
The type indicates the source (eg. mount tree changes, superblock events,
keyring changes, block layer events) and the subtype indicates the event
type (eg. mount, unmount; EIO, EDQUOT; link, unlink). The info field
indicates a number of things, including the entry length, an ID assigned to
a watchpoint contributing to this buffer and type-specific flags.
Supplementary data, such as the key ID that generated an event, can be
attached in additional slots. The maximum message size is 127 bytes.
Messages may not be padded or aligned, so there is no guarantee, for
example, that the notification type will be on a 4-byte bounary.
Signed-off-by: David Howells <dhowells@redhat.com>
2020-01-15 01:07:11 +08:00
|
|
|
spin_lock_bh(&wqueue->lock);
|
|
|
|
kref_get(&wqueue->usage);
|
|
|
|
kref_get(&watch->usage);
|
|
|
|
hlist_add_head(&watch->queue_node, &wqueue->watches);
|
|
|
|
spin_unlock_bh(&wqueue->lock);
|
|
|
|
|
|
|
|
hlist_add_head(&watch->list_node, &wlist->watchers);
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
EXPORT_SYMBOL(add_watch_to_object);
|
|
|
|
|
|
|
|
/**
|
|
|
|
* remove_watch_from_object - Remove a watch or all watches from an object.
|
|
|
|
* @wlist: The watch list to remove from
|
|
|
|
* @wq: The watch queue of interest (ignored if @all is true)
|
|
|
|
* @id: The ID of the watch to remove (ignored if @all is true)
|
|
|
|
* @all: True to remove all objects
|
|
|
|
*
|
|
|
|
* Remove a specific watch or all watches from an object. A notification is
|
|
|
|
* sent to the watcher to tell them that this happened.
|
|
|
|
*/
|
|
|
|
int remove_watch_from_object(struct watch_list *wlist, struct watch_queue *wq,
|
|
|
|
u64 id, bool all)
|
|
|
|
{
|
|
|
|
struct watch_notification_removal n;
|
|
|
|
struct watch_queue *wqueue;
|
|
|
|
struct watch *watch;
|
|
|
|
int ret = -EBADSLT;
|
|
|
|
|
|
|
|
rcu_read_lock();
|
|
|
|
|
|
|
|
again:
|
|
|
|
spin_lock(&wlist->lock);
|
|
|
|
hlist_for_each_entry(watch, &wlist->watchers, list_node) {
|
|
|
|
if (all ||
|
|
|
|
(watch->id == id && rcu_access_pointer(watch->queue) == wq))
|
|
|
|
goto found;
|
|
|
|
}
|
|
|
|
spin_unlock(&wlist->lock);
|
|
|
|
goto out;
|
|
|
|
|
|
|
|
found:
|
|
|
|
ret = 0;
|
|
|
|
hlist_del_init_rcu(&watch->list_node);
|
|
|
|
rcu_assign_pointer(watch->watch_list, NULL);
|
|
|
|
spin_unlock(&wlist->lock);
|
|
|
|
|
|
|
|
/* We now own the reference on watch that used to belong to wlist. */
|
|
|
|
|
|
|
|
n.watch.type = WATCH_TYPE_META;
|
|
|
|
n.watch.subtype = WATCH_META_REMOVAL_NOTIFICATION;
|
|
|
|
n.watch.info = watch->info_id | watch_sizeof(n.watch);
|
|
|
|
n.id = id;
|
|
|
|
if (id != 0)
|
|
|
|
n.watch.info = watch->info_id | watch_sizeof(n);
|
|
|
|
|
|
|
|
wqueue = rcu_dereference(watch->queue);
|
|
|
|
|
|
|
|
/* We don't need the watch list lock for the next bit as RCU is
|
|
|
|
* protecting *wqueue from deallocation.
|
|
|
|
*/
|
|
|
|
if (wqueue) {
|
|
|
|
post_one_notification(wqueue, &n.watch);
|
|
|
|
|
|
|
|
spin_lock_bh(&wqueue->lock);
|
|
|
|
|
|
|
|
if (!hlist_unhashed(&watch->queue_node)) {
|
|
|
|
hlist_del_init_rcu(&watch->queue_node);
|
|
|
|
put_watch(watch);
|
|
|
|
}
|
|
|
|
|
|
|
|
spin_unlock_bh(&wqueue->lock);
|
|
|
|
}
|
|
|
|
|
|
|
|
if (wlist->release_watch) {
|
|
|
|
void (*release_watch)(struct watch *);
|
|
|
|
|
|
|
|
release_watch = wlist->release_watch;
|
|
|
|
rcu_read_unlock();
|
|
|
|
(*release_watch)(watch);
|
|
|
|
rcu_read_lock();
|
|
|
|
}
|
|
|
|
put_watch(watch);
|
|
|
|
|
|
|
|
if (all && !hlist_empty(&wlist->watchers))
|
|
|
|
goto again;
|
|
|
|
out:
|
|
|
|
rcu_read_unlock();
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
EXPORT_SYMBOL(remove_watch_from_object);
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Remove all the watches that are contributory to a queue. This has the
|
|
|
|
* potential to race with removal of the watches by the destruction of the
|
|
|
|
* objects being watched or with the distribution of notifications.
|
|
|
|
*/
|
|
|
|
void watch_queue_clear(struct watch_queue *wqueue)
|
|
|
|
{
|
|
|
|
struct watch_list *wlist;
|
|
|
|
struct watch *watch;
|
|
|
|
bool release;
|
|
|
|
|
|
|
|
rcu_read_lock();
|
|
|
|
spin_lock_bh(&wqueue->lock);
|
|
|
|
|
|
|
|
/* Prevent new additions and prevent notifications from happening */
|
|
|
|
wqueue->defunct = true;
|
|
|
|
|
|
|
|
while (!hlist_empty(&wqueue->watches)) {
|
|
|
|
watch = hlist_entry(wqueue->watches.first, struct watch, queue_node);
|
|
|
|
hlist_del_init_rcu(&watch->queue_node);
|
|
|
|
/* We now own a ref on the watch. */
|
|
|
|
spin_unlock_bh(&wqueue->lock);
|
|
|
|
|
|
|
|
/* We can't do the next bit under the queue lock as we need to
|
|
|
|
* get the list lock - which would cause a deadlock if someone
|
|
|
|
* was removing from the opposite direction at the same time or
|
|
|
|
* posting a notification.
|
|
|
|
*/
|
|
|
|
wlist = rcu_dereference(watch->watch_list);
|
|
|
|
if (wlist) {
|
|
|
|
void (*release_watch)(struct watch *);
|
|
|
|
|
|
|
|
spin_lock(&wlist->lock);
|
|
|
|
|
|
|
|
release = !hlist_unhashed(&watch->list_node);
|
|
|
|
if (release) {
|
|
|
|
hlist_del_init_rcu(&watch->list_node);
|
|
|
|
rcu_assign_pointer(watch->watch_list, NULL);
|
|
|
|
|
|
|
|
/* We now own a second ref on the watch. */
|
|
|
|
}
|
|
|
|
|
|
|
|
release_watch = wlist->release_watch;
|
|
|
|
spin_unlock(&wlist->lock);
|
|
|
|
|
|
|
|
if (release) {
|
|
|
|
if (release_watch) {
|
|
|
|
rcu_read_unlock();
|
|
|
|
/* This might need to call dput(), so
|
|
|
|
* we have to drop all the locks.
|
|
|
|
*/
|
|
|
|
(*release_watch)(watch);
|
|
|
|
rcu_read_lock();
|
|
|
|
}
|
|
|
|
put_watch(watch);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
put_watch(watch);
|
|
|
|
spin_lock_bh(&wqueue->lock);
|
|
|
|
}
|
|
|
|
|
|
|
|
spin_unlock_bh(&wqueue->lock);
|
|
|
|
rcu_read_unlock();
|
|
|
|
}
|
|
|
|
|
|
|
|
/**
|
|
|
|
* get_watch_queue - Get a watch queue from its file descriptor.
|
|
|
|
* @fd: The fd to query.
|
|
|
|
*/
|
|
|
|
struct watch_queue *get_watch_queue(int fd)
|
|
|
|
{
|
|
|
|
struct pipe_inode_info *pipe;
|
|
|
|
struct watch_queue *wqueue = ERR_PTR(-EINVAL);
|
|
|
|
struct fd f;
|
|
|
|
|
|
|
|
f = fdget(fd);
|
|
|
|
if (f.file) {
|
|
|
|
pipe = get_pipe_info(f.file, false);
|
|
|
|
if (pipe && pipe->watch_queue) {
|
|
|
|
wqueue = pipe->watch_queue;
|
|
|
|
kref_get(&wqueue->usage);
|
|
|
|
}
|
|
|
|
fdput(f);
|
|
|
|
}
|
|
|
|
|
|
|
|
return wqueue;
|
|
|
|
}
|
|
|
|
EXPORT_SYMBOL(get_watch_queue);
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Initialise a watch queue
|
|
|
|
*/
|
|
|
|
int watch_queue_init(struct pipe_inode_info *pipe)
|
|
|
|
{
|
|
|
|
struct watch_queue *wqueue;
|
|
|
|
|
|
|
|
wqueue = kzalloc(sizeof(*wqueue), GFP_KERNEL);
|
|
|
|
if (!wqueue)
|
|
|
|
return -ENOMEM;
|
|
|
|
|
|
|
|
wqueue->pipe = pipe;
|
|
|
|
kref_init(&wqueue->usage);
|
|
|
|
spin_lock_init(&wqueue->lock);
|
|
|
|
INIT_HLIST_HEAD(&wqueue->watches);
|
|
|
|
|
|
|
|
pipe->watch_queue = wqueue;
|
|
|
|
return 0;
|
|
|
|
}
|