UbiquitousOS
/
OpenCloudOS-Kernel
mirror of https://gitee.com/OpenCloudOS/OpenCloudOS-Kernel.git
11
0
Fork 0
Code Issues Projects Releases Wiki Activity
OpenCloudOS-Kernel/drivers/clk/ti/clk-3xxx.c

362 lines
12 KiB
C
Raw Normal View History

CLK: TI: add omap3 clock init file clk-3xxx.c now contains the clock init functionality for omap3, including DT clock registration and adding of static clkdev entries. Signed-off-by: Tero Kristo <t-kristo@ti.com> Tested-by: Nishanth Menon <nm@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2013-08-02 19:04:19 +08:00
/*
* OMAP3 Clock init
*
* Copyright (C) 2013 Texas Instruments, Inc
* Tero Kristo (t-kristo@ti.com)
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation version 2.
*
* This program is distributed "as is" WITHOUT ANY WARRANTY of any
* kind, whether express or implied; without even the implied warranty
* of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#include <linux/kernel.h>
#include <linux/list.h>
clk: ti: Include clk.h This clock provider uses the consumer API, so include clk.h explicitly. Acked-by: Tero Kristo <t-kristo@ti.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-06-20 06:00:46 +08:00
#include <linux/clk.h>
CLK: TI: add omap3 clock init file clk-3xxx.c now contains the clock init functionality for omap3, including DT clock registration and adding of static clkdev entries. Signed-off-by: Tero Kristo <t-kristo@ti.com> Tested-by: Nishanth Menon <nm@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2013-08-02 19:04:19 +08:00
#include <linux/clk-provider.h>
#include <linux/clk/ti.h>
clk: ti: move omap2_clk_enable_init_clocks under clock driver This is no longer used outside clock driver, so move it under the driver and remove the export for it from the global header file. Signed-off-by: Tero Kristo <t-kristo@ti.com>
2015-03-03 16:51:01 +08:00
#include "clock.h"
CLK: TI: add omap3 clock init file clk-3xxx.c now contains the clock init functionality for omap3, including DT clock registration and adding of static clkdev entries. Signed-off-by: Tero Kristo <t-kristo@ti.com> Tested-by: Nishanth Menon <nm@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2013-08-02 19:04:19 +08:00
clk: ti: omap34xx: move omap34xx clock type support code to clock driver With the legacy clock data gone, this is no longer needed under platform, so move it under the clock driver itself. Remove unnecessary declarations from the TI clock header also. Signed-off-by: Tero Kristo <t-kristo@ti.com>
2015-03-03 23:28:12 +08:00
#define OMAP3430ES2_ST_DSS_IDLE_SHIFT 1
#define OMAP3430ES2_ST_HSOTGUSB_IDLE_SHIFT 5
#define OMAP3430ES2_ST_SSI_IDLE_SHIFT 8
#define OMAP34XX_CM_IDLEST_VAL 1
clk: ti: am3517: move remaining am3517 clock support code to clock driver With legacy clock support gone, this is no longer needed under platform, so move it under the clock driver itself. Make some exports be driver internal definitions at the same time. Signed-off-by: Tero Kristo <t-kristo@ti.com>
2015-03-04 03:19:25 +08:00
/*
* In AM35xx IPSS, the {ICK,FCK} enable bits for modules are exported
* in the same register at a bit offset of 0x8. The EN_ACK for ICK is
* at an offset of 4 from ICK enable bit.
*/
#define AM35XX_IPSS_ICK_MASK 0xF
#define AM35XX_IPSS_ICK_EN_ACK_OFFSET 0x4
#define AM35XX_IPSS_ICK_FCK_OFFSET 0x8
#define AM35XX_IPSS_CLK_IDLEST_VAL 0
#define AM35XX_ST_IPSS_SHIFT 5
clk: ti: omap34xx: move omap34xx clock type support code to clock driver With the legacy clock data gone, this is no longer needed under platform, so move it under the clock driver itself. Remove unnecessary declarations from the TI clock header also. Signed-off-by: Tero Kristo <t-kristo@ti.com>
2015-03-03 23:28:12 +08:00
/**
* omap3430es2_clk_ssi_find_idlest - return CM_IDLEST info for SSI
* @clk: struct clk * being enabled
* @idlest_reg: void __iomem ** to store CM_IDLEST reg address into
* @idlest_bit: pointer to a u8 to store the CM_IDLEST bit shift into
* @idlest_val: pointer to a u8 to store the CM_IDLEST indicator
*
* The OMAP3430ES2 SSI target CM_IDLEST bit is at a different shift
* from the CM_{I,F}CLKEN bit. Pass back the correct info via
* @idlest_reg and @idlest_bit. No return value.
*/
static void omap3430es2_clk_ssi_find_idlest(struct clk_hw_omap *clk,
clk: ti: convert to use proper register definition for all accesses Currently, TI clock driver uses an encapsulated struct that is cast into a void pointer to store all register addresses. This can be considered as rather nasty hackery, and prevents from expanding the register address field also. Instead, replace all the code to use proper struct in place for this, which contains all the previously used data. This patch is rather large as it is touching multiple files, but this can't be split up as we need to avoid any boot breakage. Signed-off-by: Tero Kristo <t-kristo@ti.com> Acked-by: Tony Lindgren <tony@atomide.com>
2017-02-09 17:24:37 +08:00
struct clk_omap_reg *idlest_reg,
clk: ti: omap34xx: move omap34xx clock type support code to clock driver With the legacy clock data gone, this is no longer needed under platform, so move it under the clock driver itself. Remove unnecessary declarations from the TI clock header also. Signed-off-by: Tero Kristo <t-kristo@ti.com>
2015-03-03 23:28:12 +08:00
u8 *idlest_bit,
u8 *idlest_val)
{
clk: ti: convert to use proper register definition for all accesses Currently, TI clock driver uses an encapsulated struct that is cast into a void pointer to store all register addresses. This can be considered as rather nasty hackery, and prevents from expanding the register address field also. Instead, replace all the code to use proper struct in place for this, which contains all the previously used data. This patch is rather large as it is touching multiple files, but this can't be split up as we need to avoid any boot breakage. Signed-off-by: Tero Kristo <t-kristo@ti.com> Acked-by: Tony Lindgren <tony@atomide.com>
2017-02-09 17:24:37 +08:00
memcpy(idlest_reg, &clk->enable_reg, sizeof(*idlest_reg));
idlest_reg->offset &= ~0xf0;
idlest_reg->offset |= 0x20;
clk: ti: omap34xx: move omap34xx clock type support code to clock driver With the legacy clock data gone, this is no longer needed under platform, so move it under the clock driver itself. Remove unnecessary declarations from the TI clock header also. Signed-off-by: Tero Kristo <t-kristo@ti.com>
2015-03-03 23:28:12 +08:00
*idlest_bit = OMAP3430ES2_ST_SSI_IDLE_SHIFT;
*idlest_val = OMAP34XX_CM_IDLEST_VAL;
}
const struct clk_hw_omap_ops clkhwops_omap3430es2_iclk_ssi_wait = {
.allow_idle = omap2_clkt_iclk_allow_idle,
.deny_idle = omap2_clkt_iclk_deny_idle,
.find_idlest = omap3430es2_clk_ssi_find_idlest,
.find_companion = omap2_clk_dflt_find_companion,
};
/**
* omap3430es2_clk_dss_usbhost_find_idlest - CM_IDLEST info for DSS, USBHOST
* @clk: struct clk * being enabled
* @idlest_reg: void __iomem ** to store CM_IDLEST reg address into
* @idlest_bit: pointer to a u8 to store the CM_IDLEST bit shift into
* @idlest_val: pointer to a u8 to store the CM_IDLEST indicator
*
* Some OMAP modules on OMAP3 ES2+ chips have both initiator and
* target IDLEST bits. For our purposes, we are concerned with the
* target IDLEST bits, which exist at a different bit position than
* the *CLKEN bit position for these modules (DSS and USBHOST) (The
* default find_idlest code assumes that they are at the same
* position.) No return value.
*/
clk: ti: convert to use proper register definition for all accesses Currently, TI clock driver uses an encapsulated struct that is cast into a void pointer to store all register addresses. This can be considered as rather nasty hackery, and prevents from expanding the register address field also. Instead, replace all the code to use proper struct in place for this, which contains all the previously used data. This patch is rather large as it is touching multiple files, but this can't be split up as we need to avoid any boot breakage. Signed-off-by: Tero Kristo <t-kristo@ti.com> Acked-by: Tony Lindgren <tony@atomide.com>
2017-02-09 17:24:37 +08:00
static void
omap3430es2_clk_dss_usbhost_find_idlest(struct clk_hw_omap *clk,
struct clk_omap_reg *idlest_reg,
u8 *idlest_bit, u8 *idlest_val)
clk: ti: omap34xx: move omap34xx clock type support code to clock driver With the legacy clock data gone, this is no longer needed under platform, so move it under the clock driver itself. Remove unnecessary declarations from the TI clock header also. Signed-off-by: Tero Kristo <t-kristo@ti.com>
2015-03-03 23:28:12 +08:00
{
clk: ti: convert to use proper register definition for all accesses Currently, TI clock driver uses an encapsulated struct that is cast into a void pointer to store all register addresses. This can be considered as rather nasty hackery, and prevents from expanding the register address field also. Instead, replace all the code to use proper struct in place for this, which contains all the previously used data. This patch is rather large as it is touching multiple files, but this can't be split up as we need to avoid any boot breakage. Signed-off-by: Tero Kristo <t-kristo@ti.com> Acked-by: Tony Lindgren <tony@atomide.com>
2017-02-09 17:24:37 +08:00
memcpy(idlest_reg, &clk->enable_reg, sizeof(*idlest_reg));
clk: ti: omap34xx: move omap34xx clock type support code to clock driver With the legacy clock data gone, this is no longer needed under platform, so move it under the clock driver itself. Remove unnecessary declarations from the TI clock header also. Signed-off-by: Tero Kristo <t-kristo@ti.com>
2015-03-03 23:28:12 +08:00
clk: ti: convert to use proper register definition for all accesses Currently, TI clock driver uses an encapsulated struct that is cast into a void pointer to store all register addresses. This can be considered as rather nasty hackery, and prevents from expanding the register address field also. Instead, replace all the code to use proper struct in place for this, which contains all the previously used data. This patch is rather large as it is touching multiple files, but this can't be split up as we need to avoid any boot breakage. Signed-off-by: Tero Kristo <t-kristo@ti.com> Acked-by: Tony Lindgren <tony@atomide.com>
2017-02-09 17:24:37 +08:00
idlest_reg->offset &= ~0xf0;
idlest_reg->offset |= 0x20;
clk: ti: omap34xx: move omap34xx clock type support code to clock driver With the legacy clock data gone, this is no longer needed under platform, so move it under the clock driver itself. Remove unnecessary declarations from the TI clock header also. Signed-off-by: Tero Kristo <t-kristo@ti.com>
2015-03-03 23:28:12 +08:00
/* USBHOST_IDLE has same shift */
*idlest_bit = OMAP3430ES2_ST_DSS_IDLE_SHIFT;
*idlest_val = OMAP34XX_CM_IDLEST_VAL;
}
const struct clk_hw_omap_ops clkhwops_omap3430es2_dss_usbhost_wait = {
.find_idlest = omap3430es2_clk_dss_usbhost_find_idlest,
.find_companion = omap2_clk_dflt_find_companion,
};
const struct clk_hw_omap_ops clkhwops_omap3430es2_iclk_dss_usbhost_wait = {
.allow_idle = omap2_clkt_iclk_allow_idle,
.deny_idle = omap2_clkt_iclk_deny_idle,
.find_idlest = omap3430es2_clk_dss_usbhost_find_idlest,
.find_companion = omap2_clk_dflt_find_companion,
};
/**
* omap3430es2_clk_hsotgusb_find_idlest - return CM_IDLEST info for HSOTGUSB
* @clk: struct clk * being enabled
* @idlest_reg: void __iomem ** to store CM_IDLEST reg address into
* @idlest_bit: pointer to a u8 to store the CM_IDLEST bit shift into
* @idlest_val: pointer to a u8 to store the CM_IDLEST indicator
*
* The OMAP3430ES2 HSOTGUSB target CM_IDLEST bit is at a different
* shift from the CM_{I,F}CLKEN bit. Pass back the correct info via
* @idlest_reg and @idlest_bit. No return value.
*/
clk: ti: convert to use proper register definition for all accesses Currently, TI clock driver uses an encapsulated struct that is cast into a void pointer to store all register addresses. This can be considered as rather nasty hackery, and prevents from expanding the register address field also. Instead, replace all the code to use proper struct in place for this, which contains all the previously used data. This patch is rather large as it is touching multiple files, but this can't be split up as we need to avoid any boot breakage. Signed-off-by: Tero Kristo <t-kristo@ti.com> Acked-by: Tony Lindgren <tony@atomide.com>
2017-02-09 17:24:37 +08:00
static void
omap3430es2_clk_hsotgusb_find_idlest(struct clk_hw_omap *clk,
struct clk_omap_reg *idlest_reg,
u8 *idlest_bit,
u8 *idlest_val)
clk: ti: omap34xx: move omap34xx clock type support code to clock driver With the legacy clock data gone, this is no longer needed under platform, so move it under the clock driver itself. Remove unnecessary declarations from the TI clock header also. Signed-off-by: Tero Kristo <t-kristo@ti.com>
2015-03-03 23:28:12 +08:00
{
clk: ti: convert to use proper register definition for all accesses Currently, TI clock driver uses an encapsulated struct that is cast into a void pointer to store all register addresses. This can be considered as rather nasty hackery, and prevents from expanding the register address field also. Instead, replace all the code to use proper struct in place for this, which contains all the previously used data. This patch is rather large as it is touching multiple files, but this can't be split up as we need to avoid any boot breakage. Signed-off-by: Tero Kristo <t-kristo@ti.com> Acked-by: Tony Lindgren <tony@atomide.com>
2017-02-09 17:24:37 +08:00
memcpy(idlest_reg, &clk->enable_reg, sizeof(*idlest_reg));
idlest_reg->offset &= ~0xf0;
idlest_reg->offset |= 0x20;
clk: ti: omap34xx: move omap34xx clock type support code to clock driver With the legacy clock data gone, this is no longer needed under platform, so move it under the clock driver itself. Remove unnecessary declarations from the TI clock header also. Signed-off-by: Tero Kristo <t-kristo@ti.com>
2015-03-03 23:28:12 +08:00
*idlest_bit = OMAP3430ES2_ST_HSOTGUSB_IDLE_SHIFT;
*idlest_val = OMAP34XX_CM_IDLEST_VAL;
}
const struct clk_hw_omap_ops clkhwops_omap3430es2_iclk_hsotgusb_wait = {
.allow_idle = omap2_clkt_iclk_allow_idle,
.deny_idle = omap2_clkt_iclk_deny_idle,
.find_idlest = omap3430es2_clk_hsotgusb_find_idlest,
.find_companion = omap2_clk_dflt_find_companion,
};
clk: ti: am3517: move remaining am3517 clock support code to clock driver With legacy clock support gone, this is no longer needed under platform, so move it under the clock driver itself. Make some exports be driver internal definitions at the same time. Signed-off-by: Tero Kristo <t-kristo@ti.com>
2015-03-04 03:19:25 +08:00
/**
* am35xx_clk_find_idlest - return clock ACK info for AM35XX IPSS
* @clk: struct clk * being enabled
* @idlest_reg: void __iomem ** to store CM_IDLEST reg address into
* @idlest_bit: pointer to a u8 to store the CM_IDLEST bit shift into
* @idlest_val: pointer to a u8 to store the CM_IDLEST indicator
*
* The interface clocks on AM35xx IPSS reflects the clock idle status
* in the enable register itsel at a bit offset of 4 from the enable
* bit. A value of 1 indicates that clock is enabled.
*/
static void am35xx_clk_find_idlest(struct clk_hw_omap *clk,
clk: ti: convert to use proper register definition for all accesses Currently, TI clock driver uses an encapsulated struct that is cast into a void pointer to store all register addresses. This can be considered as rather nasty hackery, and prevents from expanding the register address field also. Instead, replace all the code to use proper struct in place for this, which contains all the previously used data. This patch is rather large as it is touching multiple files, but this can't be split up as we need to avoid any boot breakage. Signed-off-by: Tero Kristo <t-kristo@ti.com> Acked-by: Tony Lindgren <tony@atomide.com>
2017-02-09 17:24:37 +08:00
struct clk_omap_reg *idlest_reg,
clk: ti: am3517: move remaining am3517 clock support code to clock driver With legacy clock support gone, this is no longer needed under platform, so move it under the clock driver itself. Make some exports be driver internal definitions at the same time. Signed-off-by: Tero Kristo <t-kristo@ti.com>
2015-03-04 03:19:25 +08:00
u8 *idlest_bit,
u8 *idlest_val)
{
clk: ti: convert to use proper register definition for all accesses Currently, TI clock driver uses an encapsulated struct that is cast into a void pointer to store all register addresses. This can be considered as rather nasty hackery, and prevents from expanding the register address field also. Instead, replace all the code to use proper struct in place for this, which contains all the previously used data. This patch is rather large as it is touching multiple files, but this can't be split up as we need to avoid any boot breakage. Signed-off-by: Tero Kristo <t-kristo@ti.com> Acked-by: Tony Lindgren <tony@atomide.com>
2017-02-09 17:24:37 +08:00
memcpy(idlest_reg, &clk->enable_reg, sizeof(*idlest_reg));
clk: ti: am3517: move remaining am3517 clock support code to clock driver With legacy clock support gone, this is no longer needed under platform, so move it under the clock driver itself. Make some exports be driver internal definitions at the same time. Signed-off-by: Tero Kristo <t-kristo@ti.com>
2015-03-04 03:19:25 +08:00
*idlest_bit = clk->enable_bit + AM35XX_IPSS_ICK_EN_ACK_OFFSET;
*idlest_val = AM35XX_IPSS_CLK_IDLEST_VAL;
}
/**
* am35xx_clk_find_companion - find companion clock to @clk
* @clk: struct clk * to find the companion clock of
* @other_reg: void __iomem ** to return the companion clock CM_*CLKEN va in
* @other_bit: u8 ** to return the companion clock bit shift in
*
* Some clocks don't have companion clocks. For example, modules with
* only an interface clock (such as HECC) don't have a companion
* clock. Right now, this code relies on the hardware exporting a bit
* in the correct companion register that indicates that the
* nonexistent 'companion clock' is active. Future patches will
* associate this type of code with per-module data structures to
* avoid this issue, and remove the casts. No return value.
*/
static void am35xx_clk_find_companion(struct clk_hw_omap *clk,
clk: ti: convert to use proper register definition for all accesses Currently, TI clock driver uses an encapsulated struct that is cast into a void pointer to store all register addresses. This can be considered as rather nasty hackery, and prevents from expanding the register address field also. Instead, replace all the code to use proper struct in place for this, which contains all the previously used data. This patch is rather large as it is touching multiple files, but this can't be split up as we need to avoid any boot breakage. Signed-off-by: Tero Kristo <t-kristo@ti.com> Acked-by: Tony Lindgren <tony@atomide.com>
2017-02-09 17:24:37 +08:00
struct clk_omap_reg *other_reg,
clk: ti: am3517: move remaining am3517 clock support code to clock driver With legacy clock support gone, this is no longer needed under platform, so move it under the clock driver itself. Make some exports be driver internal definitions at the same time. Signed-off-by: Tero Kristo <t-kristo@ti.com>
2015-03-04 03:19:25 +08:00
u8 *other_bit)
{
clk: ti: convert to use proper register definition for all accesses Currently, TI clock driver uses an encapsulated struct that is cast into a void pointer to store all register addresses. This can be considered as rather nasty hackery, and prevents from expanding the register address field also. Instead, replace all the code to use proper struct in place for this, which contains all the previously used data. This patch is rather large as it is touching multiple files, but this can't be split up as we need to avoid any boot breakage. Signed-off-by: Tero Kristo <t-kristo@ti.com> Acked-by: Tony Lindgren <tony@atomide.com>
2017-02-09 17:24:37 +08:00
memcpy(other_reg, &clk->enable_reg, sizeof(*other_reg));
clk: ti: am3517: move remaining am3517 clock support code to clock driver With legacy clock support gone, this is no longer needed under platform, so move it under the clock driver itself. Make some exports be driver internal definitions at the same time. Signed-off-by: Tero Kristo <t-kristo@ti.com>
2015-03-04 03:19:25 +08:00
if (clk->enable_bit & AM35XX_IPSS_ICK_MASK)
*other_bit = clk->enable_bit + AM35XX_IPSS_ICK_FCK_OFFSET;
else
*other_bit = clk->enable_bit - AM35XX_IPSS_ICK_FCK_OFFSET;
}
const struct clk_hw_omap_ops clkhwops_am35xx_ipss_module_wait = {
.find_idlest = am35xx_clk_find_idlest,
.find_companion = am35xx_clk_find_companion,
};
/**
* am35xx_clk_ipss_find_idlest - return CM_IDLEST info for IPSS
* @clk: struct clk * being enabled
* @idlest_reg: void __iomem ** to store CM_IDLEST reg address into
* @idlest_bit: pointer to a u8 to store the CM_IDLEST bit shift into
* @idlest_val: pointer to a u8 to store the CM_IDLEST indicator
*
* The IPSS target CM_IDLEST bit is at a different shift from the
* CM_{I,F}CLKEN bit. Pass back the correct info via @idlest_reg
* and @idlest_bit. No return value.
*/
static void am35xx_clk_ipss_find_idlest(struct clk_hw_omap *clk,
clk: ti: convert to use proper register definition for all accesses Currently, TI clock driver uses an encapsulated struct that is cast into a void pointer to store all register addresses. This can be considered as rather nasty hackery, and prevents from expanding the register address field also. Instead, replace all the code to use proper struct in place for this, which contains all the previously used data. This patch is rather large as it is touching multiple files, but this can't be split up as we need to avoid any boot breakage. Signed-off-by: Tero Kristo <t-kristo@ti.com> Acked-by: Tony Lindgren <tony@atomide.com>
2017-02-09 17:24:37 +08:00
struct clk_omap_reg *idlest_reg,
clk: ti: am3517: move remaining am3517 clock support code to clock driver With legacy clock support gone, this is no longer needed under platform, so move it under the clock driver itself. Make some exports be driver internal definitions at the same time. Signed-off-by: Tero Kristo <t-kristo@ti.com>
2015-03-04 03:19:25 +08:00
u8 *idlest_bit,
u8 *idlest_val)
{
clk: ti: convert to use proper register definition for all accesses Currently, TI clock driver uses an encapsulated struct that is cast into a void pointer to store all register addresses. This can be considered as rather nasty hackery, and prevents from expanding the register address field also. Instead, replace all the code to use proper struct in place for this, which contains all the previously used data. This patch is rather large as it is touching multiple files, but this can't be split up as we need to avoid any boot breakage. Signed-off-by: Tero Kristo <t-kristo@ti.com> Acked-by: Tony Lindgren <tony@atomide.com>
2017-02-09 17:24:37 +08:00
memcpy(idlest_reg, &clk->enable_reg, sizeof(*idlest_reg));
clk: ti: am3517: move remaining am3517 clock support code to clock driver With legacy clock support gone, this is no longer needed under platform, so move it under the clock driver itself. Make some exports be driver internal definitions at the same time. Signed-off-by: Tero Kristo <t-kristo@ti.com>
2015-03-04 03:19:25 +08:00
clk: ti: convert to use proper register definition for all accesses Currently, TI clock driver uses an encapsulated struct that is cast into a void pointer to store all register addresses. This can be considered as rather nasty hackery, and prevents from expanding the register address field also. Instead, replace all the code to use proper struct in place for this, which contains all the previously used data. This patch is rather large as it is touching multiple files, but this can't be split up as we need to avoid any boot breakage. Signed-off-by: Tero Kristo <t-kristo@ti.com> Acked-by: Tony Lindgren <tony@atomide.com>
2017-02-09 17:24:37 +08:00
idlest_reg->offset &= ~0xf0;
idlest_reg->offset |= 0x20;
clk: ti: am3517: move remaining am3517 clock support code to clock driver With legacy clock support gone, this is no longer needed under platform, so move it under the clock driver itself. Make some exports be driver internal definitions at the same time. Signed-off-by: Tero Kristo <t-kristo@ti.com>
2015-03-04 03:19:25 +08:00
*idlest_bit = AM35XX_ST_IPSS_SHIFT;
*idlest_val = OMAP34XX_CM_IDLEST_VAL;
}
const struct clk_hw_omap_ops clkhwops_am35xx_ipss_wait = {
.allow_idle = omap2_clkt_iclk_allow_idle,
.deny_idle = omap2_clkt_iclk_deny_idle,
.find_idlest = am35xx_clk_ipss_find_idlest,
.find_companion = omap2_clk_dflt_find_companion,
};
CLK: TI: add omap3 clock init file clk-3xxx.c now contains the clock init functionality for omap3, including DT clock registration and adding of static clkdev entries. Signed-off-by: Tero Kristo <t-kristo@ti.com> Tested-by: Nishanth Menon <nm@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2013-08-02 19:04:19 +08:00
static struct ti_dt_clk omap3xxx_clks[] = {
DT_CLK(NULL, "timer_32k_ck", "omap_32k_fck"),
DT_CLK(NULL, "timer_sys_ck", "sys_ck"),
{ .node_name = NULL },
};
static struct ti_dt_clk omap36xx_omap3430es2plus_clks[] = {
DT_CLK(NULL, "ssi_ssr_fck", "ssi_ssr_fck_3430es2"),
DT_CLK(NULL, "ssi_sst_fck", "ssi_sst_fck_3430es2"),
DT_CLK(NULL, "hsotgusb_ick", "hsotgusb_ick_3430es2"),
DT_CLK(NULL, "ssi_ick", "ssi_ick_3430es2"),
{ .node_name = NULL },
};
static struct ti_dt_clk omap3430es1_clks[] = {
DT_CLK(NULL, "ssi_ssr_fck", "ssi_ssr_fck_3430es1"),
DT_CLK(NULL, "ssi_sst_fck", "ssi_sst_fck_3430es1"),
DT_CLK(NULL, "hsotgusb_ick", "hsotgusb_ick_3430es1"),
DT_CLK(NULL, "ssi_ick", "ssi_ick_3430es1"),
DT_CLK(NULL, "dss1_alwon_fck", "dss1_alwon_fck_3430es1"),
DT_CLK(NULL, "dss_ick", "dss_ick_3430es1"),
{ .node_name = NULL },
};
static struct ti_dt_clk omap36xx_am35xx_omap3430es2plus_clks[] = {
DT_CLK(NULL, "dss1_alwon_fck", "dss1_alwon_fck_3430es2"),
DT_CLK(NULL, "dss_ick", "dss_ick_3430es2"),
{ .node_name = NULL },
};
static struct ti_dt_clk am35xx_clks[] = {
DT_CLK(NULL, "hsotgusb_ick", "hsotgusb_ick_am35xx"),
DT_CLK(NULL, "hsotgusb_fck", "hsotgusb_fck_am35xx"),
DT_CLK(NULL, "uart4_ick", "uart4_ick_am35xx"),
DT_CLK(NULL, "uart4_fck", "uart4_fck_am35xx"),
{ .node_name = NULL },
};
static const char *enable_init_clks[] = {
"sdrc_ick",
"gpmc_fck",
"omapctrl_ick",
};
enum {
OMAP3_SOC_AM35XX,
OMAP3_SOC_OMAP3430_ES1,
OMAP3_SOC_OMAP3430_ES2_PLUS,
OMAP3_SOC_OMAP3630,
};
clk: ti: dpll: move omap3 DPLL functionality to clock driver With the legacy clock support gone, OMAP3 generic DPLL code can now be moved over to the clock driver also. A few un-unused clkoutx2 functions are also removed at the same time. Signed-off-by: Tero Kristo <t-kristo@ti.com>
2015-03-03 19:27:48 +08:00
/**
* omap3_clk_lock_dpll5 - locks DPLL5
*
* Locks DPLL5 to a pre-defined frequency. This is required for proper
* operation of USB.
*/
void __init omap3_clk_lock_dpll5(void)
{
struct clk *dpll5_clk;
struct clk *dpll5_m2_clk;
clk: ti: omap36xx: Work around sprz319 advisory 2.1 The OMAP36xx DPLL5, driving EHCI USB, can be subject to a long-term frequency drift. The frequency drift magnitude depends on the VCO update rate, which is inversely proportional to the PLL divider. The kernel DPLL configuration code results in a high value for the divider, leading to a long term drift high enough to cause USB transmission errors. In the worst case the USB PHY's ULPI interface can stop responding, breaking USB operation completely. This manifests itself on the Beagleboard xM by the LAN9514 reporting 'Cannot enable port 2. Maybe the cable is bad?' in the kernel log. Errata sprz319 advisory 2.1 documents PLL values that minimize the drift. Use them automatically when DPLL5 is used for USB operation, which we detect based on the requested clock rate. The clock framework will still compute the PLL parameters and resulting rate as usual, but the PLL M and N values will then be overridden. This can result in the effective clock rate being slightly different than the rate cached by the clock framework, but won't cause any adverse effect to USB operation. Signed-off-by: Richard Watts <rrw@kynesim.co.uk> [Upported from v3.2 to v4.9] Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Tested-by: Ladislav Michl <ladis@linux-mips.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-12-03 05:14:38 +08:00
/*
* Errata sprz319f advisory 2.1 documents a USB host clock drift issue
* that can be worked around using specially crafted dpll5 settings
* with a dpll5_m2 divider set to 8. Set the dpll5 rate to 8x the USB
* host clock rate, its .set_rate handler() will detect that frequency
* and use the errata settings.
*/
clk: ti: dpll: move omap3 DPLL functionality to clock driver With the legacy clock support gone, OMAP3 generic DPLL code can now be moved over to the clock driver also. A few un-unused clkoutx2 functions are also removed at the same time. Signed-off-by: Tero Kristo <t-kristo@ti.com>
2015-03-03 19:27:48 +08:00
dpll5_clk = clk_get(NULL, "dpll5_ck");
clk: ti: omap36xx: Work around sprz319 advisory 2.1 The OMAP36xx DPLL5, driving EHCI USB, can be subject to a long-term frequency drift. The frequency drift magnitude depends on the VCO update rate, which is inversely proportional to the PLL divider. The kernel DPLL configuration code results in a high value for the divider, leading to a long term drift high enough to cause USB transmission errors. In the worst case the USB PHY's ULPI interface can stop responding, breaking USB operation completely. This manifests itself on the Beagleboard xM by the LAN9514 reporting 'Cannot enable port 2. Maybe the cable is bad?' in the kernel log. Errata sprz319 advisory 2.1 documents PLL values that minimize the drift. Use them automatically when DPLL5 is used for USB operation, which we detect based on the requested clock rate. The clock framework will still compute the PLL parameters and resulting rate as usual, but the PLL M and N values will then be overridden. This can result in the effective clock rate being slightly different than the rate cached by the clock framework, but won't cause any adverse effect to USB operation. Signed-off-by: Richard Watts <rrw@kynesim.co.uk> [Upported from v3.2 to v4.9] Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Tested-by: Ladislav Michl <ladis@linux-mips.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-12-03 05:14:38 +08:00
clk_set_rate(dpll5_clk, OMAP3_DPLL5_FREQ_FOR_USBHOST * 8);
clk: ti: dpll: move omap3 DPLL functionality to clock driver With the legacy clock support gone, OMAP3 generic DPLL code can now be moved over to the clock driver also. A few un-unused clkoutx2 functions are also removed at the same time. Signed-off-by: Tero Kristo <t-kristo@ti.com>
2015-03-03 19:27:48 +08:00
clk_prepare_enable(dpll5_clk);
clk: ti: omap36xx: Work around sprz319 advisory 2.1 The OMAP36xx DPLL5, driving EHCI USB, can be subject to a long-term frequency drift. The frequency drift magnitude depends on the VCO update rate, which is inversely proportional to the PLL divider. The kernel DPLL configuration code results in a high value for the divider, leading to a long term drift high enough to cause USB transmission errors. In the worst case the USB PHY's ULPI interface can stop responding, breaking USB operation completely. This manifests itself on the Beagleboard xM by the LAN9514 reporting 'Cannot enable port 2. Maybe the cable is bad?' in the kernel log. Errata sprz319 advisory 2.1 documents PLL values that minimize the drift. Use them automatically when DPLL5 is used for USB operation, which we detect based on the requested clock rate. The clock framework will still compute the PLL parameters and resulting rate as usual, but the PLL M and N values will then be overridden. This can result in the effective clock rate being slightly different than the rate cached by the clock framework, but won't cause any adverse effect to USB operation. Signed-off-by: Richard Watts <rrw@kynesim.co.uk> [Upported from v3.2 to v4.9] Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Tested-by: Ladislav Michl <ladis@linux-mips.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-12-03 05:14:38 +08:00
/* Program dpll5_m2_clk divider */
clk: ti: dpll: move omap3 DPLL functionality to clock driver With the legacy clock support gone, OMAP3 generic DPLL code can now be moved over to the clock driver also. A few un-unused clkoutx2 functions are also removed at the same time. Signed-off-by: Tero Kristo <t-kristo@ti.com>
2015-03-03 19:27:48 +08:00
dpll5_m2_clk = clk_get(NULL, "dpll5_m2_ck");
clk_prepare_enable(dpll5_m2_clk);
clk: ti: omap36xx: Work around sprz319 advisory 2.1 The OMAP36xx DPLL5, driving EHCI USB, can be subject to a long-term frequency drift. The frequency drift magnitude depends on the VCO update rate, which is inversely proportional to the PLL divider. The kernel DPLL configuration code results in a high value for the divider, leading to a long term drift high enough to cause USB transmission errors. In the worst case the USB PHY's ULPI interface can stop responding, breaking USB operation completely. This manifests itself on the Beagleboard xM by the LAN9514 reporting 'Cannot enable port 2. Maybe the cable is bad?' in the kernel log. Errata sprz319 advisory 2.1 documents PLL values that minimize the drift. Use them automatically when DPLL5 is used for USB operation, which we detect based on the requested clock rate. The clock framework will still compute the PLL parameters and resulting rate as usual, but the PLL M and N values will then be overridden. This can result in the effective clock rate being slightly different than the rate cached by the clock framework, but won't cause any adverse effect to USB operation. Signed-off-by: Richard Watts <rrw@kynesim.co.uk> [Upported from v3.2 to v4.9] Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Tested-by: Ladislav Michl <ladis@linux-mips.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-12-03 05:14:38 +08:00
clk_set_rate(dpll5_m2_clk, OMAP3_DPLL5_FREQ_FOR_USBHOST);
clk: ti: dpll: move omap3 DPLL functionality to clock driver With the legacy clock support gone, OMAP3 generic DPLL code can now be moved over to the clock driver also. A few un-unused clkoutx2 functions are also removed at the same time. Signed-off-by: Tero Kristo <t-kristo@ti.com>
2015-03-03 19:27:48 +08:00
clk_disable_unprepare(dpll5_m2_clk);
clk_disable_unprepare(dpll5_clk);
}
CLK: TI: add omap3 clock init file clk-3xxx.c now contains the clock init functionality for omap3, including DT clock registration and adding of static clkdev entries. Signed-off-by: Tero Kristo <t-kristo@ti.com> Tested-by: Nishanth Menon <nm@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2013-08-02 19:04:19 +08:00
static int __init omap3xxx_dt_clk_init(int soc_type)
{
if (soc_type == OMAP3_SOC_AM35XX || soc_type == OMAP3_SOC_OMAP3630 ||
soc_type == OMAP3_SOC_OMAP3430_ES1 ||
soc_type == OMAP3_SOC_OMAP3430_ES2_PLUS)
ti_dt_clocks_register(omap3xxx_clks);
if (soc_type == OMAP3_SOC_AM35XX)
ti_dt_clocks_register(am35xx_clks);
if (soc_type == OMAP3_SOC_OMAP3630 || soc_type == OMAP3_SOC_AM35XX ||
soc_type == OMAP3_SOC_OMAP3430_ES2_PLUS)
ti_dt_clocks_register(omap36xx_am35xx_omap3430es2plus_clks);
if (soc_type == OMAP3_SOC_OMAP3430_ES1)
ti_dt_clocks_register(omap3430es1_clks);
if (soc_type == OMAP3_SOC_OMAP3430_ES2_PLUS ||
soc_type == OMAP3_SOC_OMAP3630)
ti_dt_clocks_register(omap36xx_omap3430es2plus_clks);
omap2_clk_disable_autoidle_all();
clk: ti: omap3: cleanup unnecessary clock aliases Most of the clock aliases are no longer needed, only leave the ones required by OMAP timer code in place. Signed-off-by: Tero Kristo <t-kristo@ti.com>
2017-08-24 20:33:01 +08:00
ti_clk_add_aliases();
CLK: TI: add omap3 clock init file clk-3xxx.c now contains the clock init functionality for omap3, including DT clock registration and adding of static clkdev entries. Signed-off-by: Tero Kristo <t-kristo@ti.com> Tested-by: Nishanth Menon <nm@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2013-08-02 19:04:19 +08:00
omap2_clk_enable_init_clocks(enable_init_clks,
ARRAY_SIZE(enable_init_clks));
pr_info("Clocking rate (Crystal/Core/MPU): %ld.%01ld/%ld/%ld MHz\n",
(clk_get_rate(clk_get_sys(NULL, "osc_sys_ck")) / 1000000),
(clk_get_rate(clk_get_sys(NULL, "osc_sys_ck")) / 100000) % 10,
(clk_get_rate(clk_get_sys(NULL, "core_ck")) / 1000000),
(clk_get_rate(clk_get_sys(NULL, "arm_fck")) / 1000000));
clk: ti: Initialize clocks for dm816x The clocks on ti81xx are not compatible with omap3. On dm816x the clock source is a FAPLL (Flying Adder PLL), and on dm814x there seems to be an APLL (All Digital PLL). Let's fix up things for dm816x in preparation for adding the FAPLL support. As we already have a dummy ti81xx_dt_clk_init() in place, let's use that for now to avoid adding a dependency to the omap patches. Later on if somebody adds dm814x support we can split the ti81xx_dt_clk_init() clock init function as needed. Cc: Brian Hutchinson <b.hutchman@gmail.com> Cc: Paul Walmsley <paul@pwsan.com> Cc: Tero Kristo <t-kristo@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Michael Turquette <mturquette@linaro.org>
2015-01-14 06:51:28 +08:00
if (soc_type != OMAP3_SOC_OMAP3430_ES1)
CLK: TI: add omap3 clock init file clk-3xxx.c now contains the clock init functionality for omap3, including DT clock registration and adding of static clkdev entries. Signed-off-by: Tero Kristo <t-kristo@ti.com> Tested-by: Nishanth Menon <nm@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2013-08-02 19:04:19 +08:00
omap3_clk_lock_dpll5();
return 0;
}
int __init omap3430_dt_clk_init(void)
{
return omap3xxx_dt_clk_init(OMAP3_SOC_OMAP3430_ES2_PLUS);
}
int __init omap3630_dt_clk_init(void)
{
return omap3xxx_dt_clk_init(OMAP3_SOC_OMAP3630);
}
int __init am35xx_dt_clk_init(void)
{
return omap3xxx_dt_clk_init(OMAP3_SOC_AM35XX);
}