OpenCloudOS-Kernel/arch/powerpc/kernel/ptrace32.c

318 lines
8.5 KiB
C
Raw Normal View History

/*
* ptrace for 32-bit processes running on a 64-bit kernel.
*
* PowerPC version
* Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org)
*
* Derived from "arch/m68k/kernel/ptrace.c"
* Copyright (C) 1994 by Hamish Macdonald
* Taken from linux/kernel/ptrace.c and modified for M680x0.
* linux/kernel/ptrace.c is by Ross Biro 1/23/92, edited by Linus Torvalds
*
* Modified by Cort Dougan (cort@hq.fsmlabs.com)
* and Paul Mackerras (paulus@samba.org).
*
* This file is subject to the terms and conditions of the GNU General
* Public License. See the file COPYING in the main directory of
* this archive for more details.
*/
#include <linux/kernel.h>
#include <linux/sched.h>
#include <linux/mm.h>
#include <linux/smp.h>
#include <linux/errno.h>
#include <linux/ptrace.h>
#include <linux/regset.h>
#include <linux/user.h>
#include <linux/security.h>
#include <linux/signal.h>
#include <linux/compat.h>
#include <asm/uaccess.h>
#include <asm/page.h>
#include <asm/pgtable.h>
#include <asm/switch_to.h>
/*
* does not yet catch signals sent when the child dies.
* in exit.c or in signal.c.
*/
/* Macros to workout the correct index for the FPR in the thread struct */
#define FPRNUMBER(i) (((i) - PT_FPR0) >> 1)
#define FPRHALF(i) (((i) - PT_FPR0) & 1)
#define FPRINDEX(i) TS_FPRWIDTH * FPRNUMBER(i) * 2 + FPRHALF(i)
long compat_arch_ptrace(struct task_struct *child, compat_long_t request,
compat_ulong_t caddr, compat_ulong_t cdata)
{
unsigned long addr = caddr;
unsigned long data = cdata;
int ret;
switch (request) {
/*
* Read 4 bytes of the other process' storage
* data is a pointer specifying where the user wants the
* 4 bytes copied into
* addr is a pointer in the user's storage that contains an 8 byte
* address in the other process of the 4 bytes that is to be read
* (this is run in a 32-bit process looking at a 64-bit process)
* when I and D space are separate, these will need to be fixed.
*/
case PPC_PTRACE_PEEKTEXT_3264:
case PPC_PTRACE_PEEKDATA_3264: {
u32 tmp;
int copied;
u32 __user * addrOthers;
ret = -EIO;
/* Get the addr in the other process that we want to read */
if (get_user(addrOthers, (u32 __user * __user *)addr) != 0)
break;
copied = access_process_vm(child, (u64)addrOthers, &tmp,
sizeof(tmp), 0);
if (copied != sizeof(tmp))
break;
ret = put_user(tmp, (u32 __user *)data);
break;
}
/* Read a register (specified by ADDR) out of the "user area" */
case PTRACE_PEEKUSR: {
int index;
unsigned long tmp;
ret = -EIO;
/* convert to index and check */
index = (unsigned long) addr >> 2;
if ((addr & 3) || (index > PT_FPSCR32))
break;
CHECK_FULL_REGS(child->thread.regs);
if (index < PT_FPR0) {
ret = ptrace_get_reg(child, index, &tmp);
if (ret)
break;
} else {
flush_fp_to_thread(child);
/*
* the user space code considers the floating point
* to be an array of unsigned int (32 bits) - the
* index passed in is based on this assumption.
*/
tmp = ((unsigned int *)child->thread.fp_state.fpr)
[FPRINDEX(index)];
}
ret = put_user((unsigned int)tmp, (u32 __user *)data);
break;
}
/*
* Read 4 bytes out of the other process' pt_regs area
* data is a pointer specifying where the user wants the
* 4 bytes copied into
* addr is the offset into the other process' pt_regs structure
* that is to be read
* (this is run in a 32-bit process looking at a 64-bit process)
*/
case PPC_PTRACE_PEEKUSR_3264: {
u32 index;
u32 reg32bits;
u64 tmp;
u32 numReg;
u32 part;
ret = -EIO;
/* Determine which register the user wants */
index = (u64)addr >> 2;
numReg = index / 2;
/* Determine which part of the register the user wants */
if (index % 2)
part = 1; /* want the 2nd half of the register (right-most). */
else
part = 0; /* want the 1st half of the register (left-most). */
/* Validate the input - check to see if address is on the wrong boundary
* or beyond the end of the user area
*/
if ((addr & 3) || numReg > PT_FPSCR)
break;
CHECK_FULL_REGS(child->thread.regs);
if (numReg >= PT_FPR0) {
flush_fp_to_thread(child);
/* get 64 bit FPR */
tmp = child->thread.fp_state.fpr[numReg - PT_FPR0][0];
} else { /* register within PT_REGS struct */
unsigned long tmp2;
ret = ptrace_get_reg(child, numReg, &tmp2);
if (ret)
break;
tmp = tmp2;
}
reg32bits = ((u32*)&tmp)[part];
ret = put_user(reg32bits, (u32 __user *)data);
break;
}
/*
* Write 4 bytes into the other process' storage
* data is the 4 bytes that the user wants written
* addr is a pointer in the user's storage that contains an
* 8 byte address in the other process where the 4 bytes
* that is to be written
* (this is run in a 32-bit process looking at a 64-bit process)
* when I and D space are separate, these will need to be fixed.
*/
case PPC_PTRACE_POKETEXT_3264:
case PPC_PTRACE_POKEDATA_3264: {
u32 tmp = data;
u32 __user * addrOthers;
/* Get the addr in the other process that we want to write into */
ret = -EIO;
if (get_user(addrOthers, (u32 __user * __user *)addr) != 0)
break;
ret = 0;
if (access_process_vm(child, (u64)addrOthers, &tmp,
sizeof(tmp), 1) == sizeof(tmp))
break;
ret = -EIO;
break;
}
/* write the word at location addr in the USER area */
case PTRACE_POKEUSR: {
unsigned long index;
ret = -EIO;
/* convert to index and check */
index = (unsigned long) addr >> 2;
if ((addr & 3) || (index > PT_FPSCR32))
break;
CHECK_FULL_REGS(child->thread.regs);
if (index < PT_FPR0) {
ret = ptrace_put_reg(child, index, data);
} else {
flush_fp_to_thread(child);
/*
* the user space code considers the floating point
* to be an array of unsigned int (32 bits) - the
* index passed in is based on this assumption.
*/
((unsigned int *)child->thread.fp_state.fpr)
[FPRINDEX(index)] = data;
ret = 0;
}
break;
}
/*
* Write 4 bytes into the other process' pt_regs area
* data is the 4 bytes that the user wants written
* addr is the offset into the other process' pt_regs structure
* that is to be written into
* (this is run in a 32-bit process looking at a 64-bit process)
*/
case PPC_PTRACE_POKEUSR_3264: {
u32 index;
u32 numReg;
ret = -EIO;
/* Determine which register the user wants */
index = (u64)addr >> 2;
numReg = index / 2;
/*
* Validate the input - check to see if address is on the
* wrong boundary or beyond the end of the user area
*/
if ((addr & 3) || (numReg > PT_FPSCR))
break;
CHECK_FULL_REGS(child->thread.regs);
if (numReg < PT_FPR0) {
unsigned long freg;
ret = ptrace_get_reg(child, numReg, &freg);
if (ret)
break;
if (index % 2)
freg = (freg & ~0xfffffffful) | (data & 0xfffffffful);
else
freg = (freg & 0xfffffffful) | (data << 32);
ret = ptrace_put_reg(child, numReg, freg);
} else {
u64 *tmp;
flush_fp_to_thread(child);
/* get 64 bit FPR ... */
tmp = &child->thread.fp_state.fpr[numReg - PT_FPR0][0];
/* ... write the 32 bit part we want */
((u32 *)tmp)[index % 2] = data;
ret = 0;
}
break;
}
case PTRACE_GET_DEBUGREG: {
#ifndef CONFIG_PPC_ADV_DEBUG_REGS
unsigned long dabr_fake;
#endif
ret = -EINVAL;
/* We only support one DABR and no IABRS at the moment */
if (addr > 0)
break;
#ifdef CONFIG_PPC_ADV_DEBUG_REGS
ret = put_user(child->thread.debug.dac1, (u32 __user *)data);
#else
dabr_fake = (
(child->thread.hw_brk.address & (~HW_BRK_TYPE_DABR)) |
(child->thread.hw_brk.type & HW_BRK_TYPE_DABR));
ret = put_user(dabr_fake, (u32 __user *)data);
#endif
break;
}
case PTRACE_GETREGS: /* Get all pt_regs from the child. */
return copy_regset_to_user(
child, task_user_regset_view(current), 0,
0, PT_REGS_COUNT * sizeof(compat_long_t),
compat_ptr(data));
case PTRACE_SETREGS: /* Set all gp regs in the child. */
return copy_regset_from_user(
child, task_user_regset_view(current), 0,
0, PT_REGS_COUNT * sizeof(compat_long_t),
compat_ptr(data));
[POWERPC] ptrace updates & new, better requests The powerpc ptrace interface is dodgy at best. We have defined our "own" versions of GETREGS/SETREGS/GETFPREGS/SETFPREGS that strangely take arguments in reverse order from other archs (in addition to having different request numbers) and have subtle issue, like not accessing all of the registers in their respective categories. This patch moves the implementation of those to a separate function in order to facilitate their deprecation in the future, and provides new ptrace requests that mirror the x86 and sparc ones and use the same numbers: PTRACE_GETREGS : returns an entire pt_regs (the whole thing, not only the 32 GPRs, though that doesn't include the FPRs etc... There's a compat version for 32 bits that returns a 32 bits compatible pt_regs (44 uints) PTRACE_SETREGS : sets an entire pt_regs (the whole thing, not only the 32 GPRs, though that doesn't include the FPRs etc... Some registers cannot be written to and will just be dropped, this is the same as with POKEUSR, that is anything above MQ on 32 bits and CCR on 64 bits. There is a compat version as well. PTRACE_GETFPREGS : returns all the FP registers -including- the FPSCR that is 33 doubles (regardless of 32/64 bits) PTRACE_SETFPREGS : sets all the FP registers -including- the FPSCR that is 33 doubles (regardless of 32/64 bits) And two that only exist on 64 bits kernels: PTRACE_GETREGS64 : Same as PTRACE_GETREGS, except there is no compat function, a 32 bits process will obtain the full 64 bits registers PTRACE_SETREGS64 : Same as PTRACE_SETREGS, except there is no compat function, a 32 bits process will set the full 64 bits registers The two later ones makes things easier to have a 32 bits debugger on a 64 bits program (or on a 32 bits program that uses the full 64 bits of the GPRs, which is possible though has issues that will be fixed in a later patch). Finally, while at it, the patch removes a whole bunch of code duplication between ptrace32.c and ptrace.c, in large part by having the former call into the later for all requests that don't need any special "compat" treatment. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-06-04 13:15:43 +08:00
case PTRACE_GETFPREGS:
case PTRACE_SETFPREGS:
case PTRACE_GETVRREGS:
[POWERPC] ptrace updates & new, better requests The powerpc ptrace interface is dodgy at best. We have defined our "own" versions of GETREGS/SETREGS/GETFPREGS/SETFPREGS that strangely take arguments in reverse order from other archs (in addition to having different request numbers) and have subtle issue, like not accessing all of the registers in their respective categories. This patch moves the implementation of those to a separate function in order to facilitate their deprecation in the future, and provides new ptrace requests that mirror the x86 and sparc ones and use the same numbers: PTRACE_GETREGS : returns an entire pt_regs (the whole thing, not only the 32 GPRs, though that doesn't include the FPRs etc... There's a compat version for 32 bits that returns a 32 bits compatible pt_regs (44 uints) PTRACE_SETREGS : sets an entire pt_regs (the whole thing, not only the 32 GPRs, though that doesn't include the FPRs etc... Some registers cannot be written to and will just be dropped, this is the same as with POKEUSR, that is anything above MQ on 32 bits and CCR on 64 bits. There is a compat version as well. PTRACE_GETFPREGS : returns all the FP registers -including- the FPSCR that is 33 doubles (regardless of 32/64 bits) PTRACE_SETFPREGS : sets all the FP registers -including- the FPSCR that is 33 doubles (regardless of 32/64 bits) And two that only exist on 64 bits kernels: PTRACE_GETREGS64 : Same as PTRACE_GETREGS, except there is no compat function, a 32 bits process will obtain the full 64 bits registers PTRACE_SETREGS64 : Same as PTRACE_SETREGS, except there is no compat function, a 32 bits process will set the full 64 bits registers The two later ones makes things easier to have a 32 bits debugger on a 64 bits program (or on a 32 bits program that uses the full 64 bits of the GPRs, which is possible though has issues that will be fixed in a later patch). Finally, while at it, the patch removes a whole bunch of code duplication between ptrace32.c and ptrace.c, in large part by having the former call into the later for all requests that don't need any special "compat" treatment. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-06-04 13:15:43 +08:00
case PTRACE_SETVRREGS:
case PTRACE_GETVSRREGS:
case PTRACE_SETVSRREGS:
[POWERPC] ptrace updates & new, better requests The powerpc ptrace interface is dodgy at best. We have defined our "own" versions of GETREGS/SETREGS/GETFPREGS/SETFPREGS that strangely take arguments in reverse order from other archs (in addition to having different request numbers) and have subtle issue, like not accessing all of the registers in their respective categories. This patch moves the implementation of those to a separate function in order to facilitate their deprecation in the future, and provides new ptrace requests that mirror the x86 and sparc ones and use the same numbers: PTRACE_GETREGS : returns an entire pt_regs (the whole thing, not only the 32 GPRs, though that doesn't include the FPRs etc... There's a compat version for 32 bits that returns a 32 bits compatible pt_regs (44 uints) PTRACE_SETREGS : sets an entire pt_regs (the whole thing, not only the 32 GPRs, though that doesn't include the FPRs etc... Some registers cannot be written to and will just be dropped, this is the same as with POKEUSR, that is anything above MQ on 32 bits and CCR on 64 bits. There is a compat version as well. PTRACE_GETFPREGS : returns all the FP registers -including- the FPSCR that is 33 doubles (regardless of 32/64 bits) PTRACE_SETFPREGS : sets all the FP registers -including- the FPSCR that is 33 doubles (regardless of 32/64 bits) And two that only exist on 64 bits kernels: PTRACE_GETREGS64 : Same as PTRACE_GETREGS, except there is no compat function, a 32 bits process will obtain the full 64 bits registers PTRACE_SETREGS64 : Same as PTRACE_SETREGS, except there is no compat function, a 32 bits process will set the full 64 bits registers The two later ones makes things easier to have a 32 bits debugger on a 64 bits program (or on a 32 bits program that uses the full 64 bits of the GPRs, which is possible though has issues that will be fixed in a later patch). Finally, while at it, the patch removes a whole bunch of code duplication between ptrace32.c and ptrace.c, in large part by having the former call into the later for all requests that don't need any special "compat" treatment. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-06-04 13:15:43 +08:00
case PTRACE_GETREGS64:
case PTRACE_SETREGS64:
case PTRACE_KILL:
case PTRACE_SINGLESTEP:
case PTRACE_DETACH:
case PTRACE_SET_DEBUGREG:
case PTRACE_SYSCALL:
case PTRACE_CONT:
case PPC_PTRACE_GETHWDBGINFO:
case PPC_PTRACE_SETHWDEBUG:
case PPC_PTRACE_DELHWDEBUG:
[POWERPC] ptrace updates & new, better requests The powerpc ptrace interface is dodgy at best. We have defined our "own" versions of GETREGS/SETREGS/GETFPREGS/SETFPREGS that strangely take arguments in reverse order from other archs (in addition to having different request numbers) and have subtle issue, like not accessing all of the registers in their respective categories. This patch moves the implementation of those to a separate function in order to facilitate their deprecation in the future, and provides new ptrace requests that mirror the x86 and sparc ones and use the same numbers: PTRACE_GETREGS : returns an entire pt_regs (the whole thing, not only the 32 GPRs, though that doesn't include the FPRs etc... There's a compat version for 32 bits that returns a 32 bits compatible pt_regs (44 uints) PTRACE_SETREGS : sets an entire pt_regs (the whole thing, not only the 32 GPRs, though that doesn't include the FPRs etc... Some registers cannot be written to and will just be dropped, this is the same as with POKEUSR, that is anything above MQ on 32 bits and CCR on 64 bits. There is a compat version as well. PTRACE_GETFPREGS : returns all the FP registers -including- the FPSCR that is 33 doubles (regardless of 32/64 bits) PTRACE_SETFPREGS : sets all the FP registers -including- the FPSCR that is 33 doubles (regardless of 32/64 bits) And two that only exist on 64 bits kernels: PTRACE_GETREGS64 : Same as PTRACE_GETREGS, except there is no compat function, a 32 bits process will obtain the full 64 bits registers PTRACE_SETREGS64 : Same as PTRACE_SETREGS, except there is no compat function, a 32 bits process will set the full 64 bits registers The two later ones makes things easier to have a 32 bits debugger on a 64 bits program (or on a 32 bits program that uses the full 64 bits of the GPRs, which is possible though has issues that will be fixed in a later patch). Finally, while at it, the patch removes a whole bunch of code duplication between ptrace32.c and ptrace.c, in large part by having the former call into the later for all requests that don't need any special "compat" treatment. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-06-04 13:15:43 +08:00
ret = arch_ptrace(child, request, addr, data);
break;
default:
ret = compat_ptrace_request(child, request, addr, data);
break;
}
return ret;
}