OpenCloudOS-Kernel/fs/exofs/ios.c

804 lines
19 KiB
C
Raw Normal View History

/*
* Copyright (C) 2005, 2006
* Avishay Traeger (avishay@gmail.com)
* Copyright (C) 2008, 2009
* Boaz Harrosh <bharrosh@panasas.com>
*
* This file is part of exofs.
*
* exofs is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation. Since it is based on ext2, and the only
* valid version of GPL for the Linux kernel is version 2, the only valid
* version of GPL for exofs is version 2.
*
* exofs is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with exofs; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-24 16:04:11 +08:00
#include <linux/slab.h>
#include <scsi/scsi_device.h>
exofs: RAID0 support We now support striping over mirror devices. Including variable sized stripe_unit. Some limits: * stripe_unit must be a multiple of PAGE_SIZE * stripe_unit * stripe_count is maximum upto 32-bit (4Gb) Tested RAID0 over mirrors, RAID0 only, mirrors only. All check. Design notes: * I'm not using a vectored raid-engine mechanism yet. Following the pnfs-objects-layout data-map structure, "Mirror" is just a private case of "group_width" == 1, and RAID0 is a private case of "Mirrors" == 1. The performance lose of the general case over the particular special case optimization is totally negligible, also considering the extra code size. * In general I added a prepare_stripes() stage that divides the to-be-io pages to the participating devices, the previous exofs_ios_write/read, now becomes _write/read_mirrors and a new write/read upper layer loops on all devices calling _write/read_mirrors. Effectively the prepare_stripes stage is the all secret. Also truncate need fixing to accommodate for striping. * In a RAID0 arrangement, in a regular usage scenario, if all inode layouts will start at the same device, the small files fill up the first device and the later devices stay empty, the farther the device the emptier it is. To fix that, each inode will start at a different stripe_unit, according to it's obj_id modulus number-of-stripe-units. And will then span all stripe-units in the same incrementing order wrapping back to the beginning of the device table. We call it a stripe-units moving window. Special consideration was taken to keep all devices in a mirror arrangement identical. So a broken osd-device could just be cloned from one of the mirrors and no FS scrubbing is needed. (We do that by rotating stripe-unit at a time and not a single device at a time.) TODO: We no longer verify object_length == inode->i_size in exofs_iget. (since i_size is stripped on multiple objects now). I should introduce a multiple-device attribute reading, and use it in exofs_iget. Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
2010-02-01 19:35:51 +08:00
#include <asm/div64.h>
#include "exofs.h"
#define EXOFS_DBGMSG2(M...) do {} while (0)
/* #define EXOFS_DBGMSG2 EXOFS_DBGMSG */
exofs: Move all operations to an io_engine In anticipation for multi-device operations, we separate osd operations into an abstract I/O API. Currently only one device is used but later when adding more devices, we will drive all devices in parallel according to a "data_map" that describes how data is arranged on multiple devices. The file system level operates, like before, as if there is one object (inode-number) and an i_size. The io engine will split this to the same object-number but on multiple device. At first we introduce Mirror (raid 1) layout. But at the final outcome we intend to fully implement the pNFS-Objects data-map, including raid 0,4,5,6 over mirrored devices, over multiple device-groups. And more. See: http://tools.ietf.org/html/draft-ietf-nfsv4-pnfs-obj-12 * Define an io_state based API for accessing osd storage devices in an abstract way. Usage: First a caller allocates an io state with: exofs_get_io_state(struct exofs_sb_info *sbi, struct exofs_io_state** ios); Then calles one of: exofs_sbi_create(struct exofs_io_state *ios); exofs_sbi_remove(struct exofs_io_state *ios); exofs_sbi_write(struct exofs_io_state *ios); exofs_sbi_read(struct exofs_io_state *ios); exofs_oi_truncate(struct exofs_i_info *oi, u64 new_len); And when done exofs_put_io_state(struct exofs_io_state *ios); * Convert all source files to use this new API * Convert from bio_alloc to bio_kmalloc * In io engine we make use of the now fixed osd_req_decode_sense There are no functional changes or on disk additions after this patch. Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
2009-11-08 20:54:08 +08:00
void exofs_make_credential(u8 cred_a[OSD_CAP_LEN], const struct osd_obj_id *obj)
{
exofs: Move all operations to an io_engine In anticipation for multi-device operations, we separate osd operations into an abstract I/O API. Currently only one device is used but later when adding more devices, we will drive all devices in parallel according to a "data_map" that describes how data is arranged on multiple devices. The file system level operates, like before, as if there is one object (inode-number) and an i_size. The io engine will split this to the same object-number but on multiple device. At first we introduce Mirror (raid 1) layout. But at the final outcome we intend to fully implement the pNFS-Objects data-map, including raid 0,4,5,6 over mirrored devices, over multiple device-groups. And more. See: http://tools.ietf.org/html/draft-ietf-nfsv4-pnfs-obj-12 * Define an io_state based API for accessing osd storage devices in an abstract way. Usage: First a caller allocates an io state with: exofs_get_io_state(struct exofs_sb_info *sbi, struct exofs_io_state** ios); Then calles one of: exofs_sbi_create(struct exofs_io_state *ios); exofs_sbi_remove(struct exofs_io_state *ios); exofs_sbi_write(struct exofs_io_state *ios); exofs_sbi_read(struct exofs_io_state *ios); exofs_oi_truncate(struct exofs_i_info *oi, u64 new_len); And when done exofs_put_io_state(struct exofs_io_state *ios); * Convert all source files to use this new API * Convert from bio_alloc to bio_kmalloc * In io engine we make use of the now fixed osd_req_decode_sense There are no functional changes or on disk additions after this patch. Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
2009-11-08 20:54:08 +08:00
osd_sec_init_nosec_doall_caps(cred_a, obj, false, true);
}
int exofs_read_kern(struct osd_dev *od, u8 *cred, struct osd_obj_id *obj,
u64 offset, void *p, unsigned length)
{
struct osd_request *or = osd_start_request(od, GFP_KERNEL);
/* struct osd_sense_info osi = {.key = 0};*/
int ret;
if (unlikely(!or)) {
EXOFS_DBGMSG("%s: osd_start_request failed.\n", __func__);
return -ENOMEM;
}
ret = osd_req_read_kern(or, obj, offset, p, length);
if (unlikely(ret)) {
EXOFS_DBGMSG("%s: osd_req_read_kern failed.\n", __func__);
goto out;
}
exofs: Move all operations to an io_engine In anticipation for multi-device operations, we separate osd operations into an abstract I/O API. Currently only one device is used but later when adding more devices, we will drive all devices in parallel according to a "data_map" that describes how data is arranged on multiple devices. The file system level operates, like before, as if there is one object (inode-number) and an i_size. The io engine will split this to the same object-number but on multiple device. At first we introduce Mirror (raid 1) layout. But at the final outcome we intend to fully implement the pNFS-Objects data-map, including raid 0,4,5,6 over mirrored devices, over multiple device-groups. And more. See: http://tools.ietf.org/html/draft-ietf-nfsv4-pnfs-obj-12 * Define an io_state based API for accessing osd storage devices in an abstract way. Usage: First a caller allocates an io state with: exofs_get_io_state(struct exofs_sb_info *sbi, struct exofs_io_state** ios); Then calles one of: exofs_sbi_create(struct exofs_io_state *ios); exofs_sbi_remove(struct exofs_io_state *ios); exofs_sbi_write(struct exofs_io_state *ios); exofs_sbi_read(struct exofs_io_state *ios); exofs_oi_truncate(struct exofs_i_info *oi, u64 new_len); And when done exofs_put_io_state(struct exofs_io_state *ios); * Convert all source files to use this new API * Convert from bio_alloc to bio_kmalloc * In io engine we make use of the now fixed osd_req_decode_sense There are no functional changes or on disk additions after this patch. Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
2009-11-08 20:54:08 +08:00
ret = osd_finalize_request(or, 0, cred, NULL);
if (unlikely(ret)) {
EXOFS_DBGMSG("Failed to osd_finalize_request() => %d\n", ret);
exofs: Move all operations to an io_engine In anticipation for multi-device operations, we separate osd operations into an abstract I/O API. Currently only one device is used but later when adding more devices, we will drive all devices in parallel according to a "data_map" that describes how data is arranged on multiple devices. The file system level operates, like before, as if there is one object (inode-number) and an i_size. The io engine will split this to the same object-number but on multiple device. At first we introduce Mirror (raid 1) layout. But at the final outcome we intend to fully implement the pNFS-Objects data-map, including raid 0,4,5,6 over mirrored devices, over multiple device-groups. And more. See: http://tools.ietf.org/html/draft-ietf-nfsv4-pnfs-obj-12 * Define an io_state based API for accessing osd storage devices in an abstract way. Usage: First a caller allocates an io state with: exofs_get_io_state(struct exofs_sb_info *sbi, struct exofs_io_state** ios); Then calles one of: exofs_sbi_create(struct exofs_io_state *ios); exofs_sbi_remove(struct exofs_io_state *ios); exofs_sbi_write(struct exofs_io_state *ios); exofs_sbi_read(struct exofs_io_state *ios); exofs_oi_truncate(struct exofs_i_info *oi, u64 new_len); And when done exofs_put_io_state(struct exofs_io_state *ios); * Convert all source files to use this new API * Convert from bio_alloc to bio_kmalloc * In io engine we make use of the now fixed osd_req_decode_sense There are no functional changes or on disk additions after this patch. Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
2009-11-08 20:54:08 +08:00
goto out;
}
exofs: Move all operations to an io_engine In anticipation for multi-device operations, we separate osd operations into an abstract I/O API. Currently only one device is used but later when adding more devices, we will drive all devices in parallel according to a "data_map" that describes how data is arranged on multiple devices. The file system level operates, like before, as if there is one object (inode-number) and an i_size. The io engine will split this to the same object-number but on multiple device. At first we introduce Mirror (raid 1) layout. But at the final outcome we intend to fully implement the pNFS-Objects data-map, including raid 0,4,5,6 over mirrored devices, over multiple device-groups. And more. See: http://tools.ietf.org/html/draft-ietf-nfsv4-pnfs-obj-12 * Define an io_state based API for accessing osd storage devices in an abstract way. Usage: First a caller allocates an io state with: exofs_get_io_state(struct exofs_sb_info *sbi, struct exofs_io_state** ios); Then calles one of: exofs_sbi_create(struct exofs_io_state *ios); exofs_sbi_remove(struct exofs_io_state *ios); exofs_sbi_write(struct exofs_io_state *ios); exofs_sbi_read(struct exofs_io_state *ios); exofs_oi_truncate(struct exofs_i_info *oi, u64 new_len); And when done exofs_put_io_state(struct exofs_io_state *ios); * Convert all source files to use this new API * Convert from bio_alloc to bio_kmalloc * In io engine we make use of the now fixed osd_req_decode_sense There are no functional changes or on disk additions after this patch. Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
2009-11-08 20:54:08 +08:00
ret = osd_execute_request(or);
if (unlikely(ret))
EXOFS_DBGMSG("osd_execute_request() => %d\n", ret);
/* osd_req_decode_sense(or, ret); */
exofs: Move all operations to an io_engine In anticipation for multi-device operations, we separate osd operations into an abstract I/O API. Currently only one device is used but later when adding more devices, we will drive all devices in parallel according to a "data_map" that describes how data is arranged on multiple devices. The file system level operates, like before, as if there is one object (inode-number) and an i_size. The io engine will split this to the same object-number but on multiple device. At first we introduce Mirror (raid 1) layout. But at the final outcome we intend to fully implement the pNFS-Objects data-map, including raid 0,4,5,6 over mirrored devices, over multiple device-groups. And more. See: http://tools.ietf.org/html/draft-ietf-nfsv4-pnfs-obj-12 * Define an io_state based API for accessing osd storage devices in an abstract way. Usage: First a caller allocates an io state with: exofs_get_io_state(struct exofs_sb_info *sbi, struct exofs_io_state** ios); Then calles one of: exofs_sbi_create(struct exofs_io_state *ios); exofs_sbi_remove(struct exofs_io_state *ios); exofs_sbi_write(struct exofs_io_state *ios); exofs_sbi_read(struct exofs_io_state *ios); exofs_oi_truncate(struct exofs_i_info *oi, u64 new_len); And when done exofs_put_io_state(struct exofs_io_state *ios); * Convert all source files to use this new API * Convert from bio_alloc to bio_kmalloc * In io engine we make use of the now fixed osd_req_decode_sense There are no functional changes or on disk additions after this patch. Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
2009-11-08 20:54:08 +08:00
out:
osd_end_request(or);
return ret;
}
int exofs_get_io_state(struct exofs_layout *layout,
struct exofs_io_state **pios)
{
exofs: Move all operations to an io_engine In anticipation for multi-device operations, we separate osd operations into an abstract I/O API. Currently only one device is used but later when adding more devices, we will drive all devices in parallel according to a "data_map" that describes how data is arranged on multiple devices. The file system level operates, like before, as if there is one object (inode-number) and an i_size. The io engine will split this to the same object-number but on multiple device. At first we introduce Mirror (raid 1) layout. But at the final outcome we intend to fully implement the pNFS-Objects data-map, including raid 0,4,5,6 over mirrored devices, over multiple device-groups. And more. See: http://tools.ietf.org/html/draft-ietf-nfsv4-pnfs-obj-12 * Define an io_state based API for accessing osd storage devices in an abstract way. Usage: First a caller allocates an io state with: exofs_get_io_state(struct exofs_sb_info *sbi, struct exofs_io_state** ios); Then calles one of: exofs_sbi_create(struct exofs_io_state *ios); exofs_sbi_remove(struct exofs_io_state *ios); exofs_sbi_write(struct exofs_io_state *ios); exofs_sbi_read(struct exofs_io_state *ios); exofs_oi_truncate(struct exofs_i_info *oi, u64 new_len); And when done exofs_put_io_state(struct exofs_io_state *ios); * Convert all source files to use this new API * Convert from bio_alloc to bio_kmalloc * In io engine we make use of the now fixed osd_req_decode_sense There are no functional changes or on disk additions after this patch. Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
2009-11-08 20:54:08 +08:00
struct exofs_io_state *ios;
/*TODO: Maybe use kmem_cach per sbi of size
* exofs_io_state_size(layout->s_numdevs)
exofs: Move all operations to an io_engine In anticipation for multi-device operations, we separate osd operations into an abstract I/O API. Currently only one device is used but later when adding more devices, we will drive all devices in parallel according to a "data_map" that describes how data is arranged on multiple devices. The file system level operates, like before, as if there is one object (inode-number) and an i_size. The io engine will split this to the same object-number but on multiple device. At first we introduce Mirror (raid 1) layout. But at the final outcome we intend to fully implement the pNFS-Objects data-map, including raid 0,4,5,6 over mirrored devices, over multiple device-groups. And more. See: http://tools.ietf.org/html/draft-ietf-nfsv4-pnfs-obj-12 * Define an io_state based API for accessing osd storage devices in an abstract way. Usage: First a caller allocates an io state with: exofs_get_io_state(struct exofs_sb_info *sbi, struct exofs_io_state** ios); Then calles one of: exofs_sbi_create(struct exofs_io_state *ios); exofs_sbi_remove(struct exofs_io_state *ios); exofs_sbi_write(struct exofs_io_state *ios); exofs_sbi_read(struct exofs_io_state *ios); exofs_oi_truncate(struct exofs_i_info *oi, u64 new_len); And when done exofs_put_io_state(struct exofs_io_state *ios); * Convert all source files to use this new API * Convert from bio_alloc to bio_kmalloc * In io engine we make use of the now fixed osd_req_decode_sense There are no functional changes or on disk additions after this patch. Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
2009-11-08 20:54:08 +08:00
*/
ios = kzalloc(exofs_io_state_size(layout->s_numdevs), GFP_KERNEL);
exofs: Move all operations to an io_engine In anticipation for multi-device operations, we separate osd operations into an abstract I/O API. Currently only one device is used but later when adding more devices, we will drive all devices in parallel according to a "data_map" that describes how data is arranged on multiple devices. The file system level operates, like before, as if there is one object (inode-number) and an i_size. The io engine will split this to the same object-number but on multiple device. At first we introduce Mirror (raid 1) layout. But at the final outcome we intend to fully implement the pNFS-Objects data-map, including raid 0,4,5,6 over mirrored devices, over multiple device-groups. And more. See: http://tools.ietf.org/html/draft-ietf-nfsv4-pnfs-obj-12 * Define an io_state based API for accessing osd storage devices in an abstract way. Usage: First a caller allocates an io state with: exofs_get_io_state(struct exofs_sb_info *sbi, struct exofs_io_state** ios); Then calles one of: exofs_sbi_create(struct exofs_io_state *ios); exofs_sbi_remove(struct exofs_io_state *ios); exofs_sbi_write(struct exofs_io_state *ios); exofs_sbi_read(struct exofs_io_state *ios); exofs_oi_truncate(struct exofs_i_info *oi, u64 new_len); And when done exofs_put_io_state(struct exofs_io_state *ios); * Convert all source files to use this new API * Convert from bio_alloc to bio_kmalloc * In io engine we make use of the now fixed osd_req_decode_sense There are no functional changes or on disk additions after this patch. Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
2009-11-08 20:54:08 +08:00
if (unlikely(!ios)) {
EXOFS_DBGMSG("Failed kzalloc bytes=%d\n",
exofs_io_state_size(layout->s_numdevs));
exofs: Move all operations to an io_engine In anticipation for multi-device operations, we separate osd operations into an abstract I/O API. Currently only one device is used but later when adding more devices, we will drive all devices in parallel according to a "data_map" that describes how data is arranged on multiple devices. The file system level operates, like before, as if there is one object (inode-number) and an i_size. The io engine will split this to the same object-number but on multiple device. At first we introduce Mirror (raid 1) layout. But at the final outcome we intend to fully implement the pNFS-Objects data-map, including raid 0,4,5,6 over mirrored devices, over multiple device-groups. And more. See: http://tools.ietf.org/html/draft-ietf-nfsv4-pnfs-obj-12 * Define an io_state based API for accessing osd storage devices in an abstract way. Usage: First a caller allocates an io state with: exofs_get_io_state(struct exofs_sb_info *sbi, struct exofs_io_state** ios); Then calles one of: exofs_sbi_create(struct exofs_io_state *ios); exofs_sbi_remove(struct exofs_io_state *ios); exofs_sbi_write(struct exofs_io_state *ios); exofs_sbi_read(struct exofs_io_state *ios); exofs_oi_truncate(struct exofs_i_info *oi, u64 new_len); And when done exofs_put_io_state(struct exofs_io_state *ios); * Convert all source files to use this new API * Convert from bio_alloc to bio_kmalloc * In io engine we make use of the now fixed osd_req_decode_sense There are no functional changes or on disk additions after this patch. Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
2009-11-08 20:54:08 +08:00
*pios = NULL;
return -ENOMEM;
}
ios->layout = layout;
ios->obj.partition = layout->s_pid;
exofs: Move all operations to an io_engine In anticipation for multi-device operations, we separate osd operations into an abstract I/O API. Currently only one device is used but later when adding more devices, we will drive all devices in parallel according to a "data_map" that describes how data is arranged on multiple devices. The file system level operates, like before, as if there is one object (inode-number) and an i_size. The io engine will split this to the same object-number but on multiple device. At first we introduce Mirror (raid 1) layout. But at the final outcome we intend to fully implement the pNFS-Objects data-map, including raid 0,4,5,6 over mirrored devices, over multiple device-groups. And more. See: http://tools.ietf.org/html/draft-ietf-nfsv4-pnfs-obj-12 * Define an io_state based API for accessing osd storage devices in an abstract way. Usage: First a caller allocates an io state with: exofs_get_io_state(struct exofs_sb_info *sbi, struct exofs_io_state** ios); Then calles one of: exofs_sbi_create(struct exofs_io_state *ios); exofs_sbi_remove(struct exofs_io_state *ios); exofs_sbi_write(struct exofs_io_state *ios); exofs_sbi_read(struct exofs_io_state *ios); exofs_oi_truncate(struct exofs_i_info *oi, u64 new_len); And when done exofs_put_io_state(struct exofs_io_state *ios); * Convert all source files to use this new API * Convert from bio_alloc to bio_kmalloc * In io engine we make use of the now fixed osd_req_decode_sense There are no functional changes or on disk additions after this patch. Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
2009-11-08 20:54:08 +08:00
*pios = ios;
return 0;
}
exofs: Move all operations to an io_engine In anticipation for multi-device operations, we separate osd operations into an abstract I/O API. Currently only one device is used but later when adding more devices, we will drive all devices in parallel according to a "data_map" that describes how data is arranged on multiple devices. The file system level operates, like before, as if there is one object (inode-number) and an i_size. The io engine will split this to the same object-number but on multiple device. At first we introduce Mirror (raid 1) layout. But at the final outcome we intend to fully implement the pNFS-Objects data-map, including raid 0,4,5,6 over mirrored devices, over multiple device-groups. And more. See: http://tools.ietf.org/html/draft-ietf-nfsv4-pnfs-obj-12 * Define an io_state based API for accessing osd storage devices in an abstract way. Usage: First a caller allocates an io state with: exofs_get_io_state(struct exofs_sb_info *sbi, struct exofs_io_state** ios); Then calles one of: exofs_sbi_create(struct exofs_io_state *ios); exofs_sbi_remove(struct exofs_io_state *ios); exofs_sbi_write(struct exofs_io_state *ios); exofs_sbi_read(struct exofs_io_state *ios); exofs_oi_truncate(struct exofs_i_info *oi, u64 new_len); And when done exofs_put_io_state(struct exofs_io_state *ios); * Convert all source files to use this new API * Convert from bio_alloc to bio_kmalloc * In io engine we make use of the now fixed osd_req_decode_sense There are no functional changes or on disk additions after this patch. Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
2009-11-08 20:54:08 +08:00
void exofs_put_io_state(struct exofs_io_state *ios)
{
exofs: Move all operations to an io_engine In anticipation for multi-device operations, we separate osd operations into an abstract I/O API. Currently only one device is used but later when adding more devices, we will drive all devices in parallel according to a "data_map" that describes how data is arranged on multiple devices. The file system level operates, like before, as if there is one object (inode-number) and an i_size. The io engine will split this to the same object-number but on multiple device. At first we introduce Mirror (raid 1) layout. But at the final outcome we intend to fully implement the pNFS-Objects data-map, including raid 0,4,5,6 over mirrored devices, over multiple device-groups. And more. See: http://tools.ietf.org/html/draft-ietf-nfsv4-pnfs-obj-12 * Define an io_state based API for accessing osd storage devices in an abstract way. Usage: First a caller allocates an io state with: exofs_get_io_state(struct exofs_sb_info *sbi, struct exofs_io_state** ios); Then calles one of: exofs_sbi_create(struct exofs_io_state *ios); exofs_sbi_remove(struct exofs_io_state *ios); exofs_sbi_write(struct exofs_io_state *ios); exofs_sbi_read(struct exofs_io_state *ios); exofs_oi_truncate(struct exofs_i_info *oi, u64 new_len); And when done exofs_put_io_state(struct exofs_io_state *ios); * Convert all source files to use this new API * Convert from bio_alloc to bio_kmalloc * In io engine we make use of the now fixed osd_req_decode_sense There are no functional changes or on disk additions after this patch. Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
2009-11-08 20:54:08 +08:00
if (ios) {
unsigned i;
exofs: Move all operations to an io_engine In anticipation for multi-device operations, we separate osd operations into an abstract I/O API. Currently only one device is used but later when adding more devices, we will drive all devices in parallel according to a "data_map" that describes how data is arranged on multiple devices. The file system level operates, like before, as if there is one object (inode-number) and an i_size. The io engine will split this to the same object-number but on multiple device. At first we introduce Mirror (raid 1) layout. But at the final outcome we intend to fully implement the pNFS-Objects data-map, including raid 0,4,5,6 over mirrored devices, over multiple device-groups. And more. See: http://tools.ietf.org/html/draft-ietf-nfsv4-pnfs-obj-12 * Define an io_state based API for accessing osd storage devices in an abstract way. Usage: First a caller allocates an io state with: exofs_get_io_state(struct exofs_sb_info *sbi, struct exofs_io_state** ios); Then calles one of: exofs_sbi_create(struct exofs_io_state *ios); exofs_sbi_remove(struct exofs_io_state *ios); exofs_sbi_write(struct exofs_io_state *ios); exofs_sbi_read(struct exofs_io_state *ios); exofs_oi_truncate(struct exofs_i_info *oi, u64 new_len); And when done exofs_put_io_state(struct exofs_io_state *ios); * Convert all source files to use this new API * Convert from bio_alloc to bio_kmalloc * In io engine we make use of the now fixed osd_req_decode_sense There are no functional changes or on disk additions after this patch. Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
2009-11-08 20:54:08 +08:00
for (i = 0; i < ios->numdevs; i++) {
struct exofs_per_dev_state *per_dev = &ios->per_dev[i];
if (per_dev->or)
osd_end_request(per_dev->or);
if (per_dev->bio)
bio_put(per_dev->bio);
}
kfree(ios);
}
exofs: Move all operations to an io_engine In anticipation for multi-device operations, we separate osd operations into an abstract I/O API. Currently only one device is used but later when adding more devices, we will drive all devices in parallel according to a "data_map" that describes how data is arranged on multiple devices. The file system level operates, like before, as if there is one object (inode-number) and an i_size. The io engine will split this to the same object-number but on multiple device. At first we introduce Mirror (raid 1) layout. But at the final outcome we intend to fully implement the pNFS-Objects data-map, including raid 0,4,5,6 over mirrored devices, over multiple device-groups. And more. See: http://tools.ietf.org/html/draft-ietf-nfsv4-pnfs-obj-12 * Define an io_state based API for accessing osd storage devices in an abstract way. Usage: First a caller allocates an io state with: exofs_get_io_state(struct exofs_sb_info *sbi, struct exofs_io_state** ios); Then calles one of: exofs_sbi_create(struct exofs_io_state *ios); exofs_sbi_remove(struct exofs_io_state *ios); exofs_sbi_write(struct exofs_io_state *ios); exofs_sbi_read(struct exofs_io_state *ios); exofs_oi_truncate(struct exofs_i_info *oi, u64 new_len); And when done exofs_put_io_state(struct exofs_io_state *ios); * Convert all source files to use this new API * Convert from bio_alloc to bio_kmalloc * In io engine we make use of the now fixed osd_req_decode_sense There are no functional changes or on disk additions after this patch. Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
2009-11-08 20:54:08 +08:00
}
exofs: Define on-disk per-inode optional layout attribute * Layouts describe the way a file is spread on multiple devices. The layout information is stored in the objects attribute introduced in this patch. * There can be multiple generating function for the layout. Currently defined: - No attribute present - use below moving-window on global device table, all devices. (This is the only one currently used in exofs) - an obj_id generated moving window - the obj_id is a randomizing factor in the otherwise global map layout. - An explicit layout stored, including a data_map and a device index list. - More might be defined in future ... * There are two attributes defined of the same structure: A-data-files-layout - This layout is used by data-files. If present at a directory, all files of that directory will be created with this layout. A-meta-data-layout - This layout is used by a directory and other meta-data information. Also inherited at creation of subdirectories. * At creation time inodes are created with the layout specified above. A usermode utility may change the creation layout on a give directory or file. Which in the case of directories, will also apply to newly created files/subdirectories, children of that directory. In the simple unaltered case of a newly created exofs, no layout attributes are present, and all layouts adhere to the layout specified at the device-table. * In case of a future file system loaded in an old exofs-driver. At iget(), the generating_function is inspected and if not supported will return an IO error to the application and the inode will not be loaded. So not to damage any data. Note: After this patch we do not yet support any type of layout only the RAID0 patch that enables striping at the super-block level will add support for RAID0 layouts above. This way we are past and future compatible and fully bisectable. * Access to the device table is done by an accessor since it will change according to above information. Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
2010-01-28 17:58:08 +08:00
unsigned exofs_layout_od_id(struct exofs_layout *layout,
osd_id obj_no, unsigned layout_index)
{
exofs: RAID0 support We now support striping over mirror devices. Including variable sized stripe_unit. Some limits: * stripe_unit must be a multiple of PAGE_SIZE * stripe_unit * stripe_count is maximum upto 32-bit (4Gb) Tested RAID0 over mirrors, RAID0 only, mirrors only. All check. Design notes: * I'm not using a vectored raid-engine mechanism yet. Following the pnfs-objects-layout data-map structure, "Mirror" is just a private case of "group_width" == 1, and RAID0 is a private case of "Mirrors" == 1. The performance lose of the general case over the particular special case optimization is totally negligible, also considering the extra code size. * In general I added a prepare_stripes() stage that divides the to-be-io pages to the participating devices, the previous exofs_ios_write/read, now becomes _write/read_mirrors and a new write/read upper layer loops on all devices calling _write/read_mirrors. Effectively the prepare_stripes stage is the all secret. Also truncate need fixing to accommodate for striping. * In a RAID0 arrangement, in a regular usage scenario, if all inode layouts will start at the same device, the small files fill up the first device and the later devices stay empty, the farther the device the emptier it is. To fix that, each inode will start at a different stripe_unit, according to it's obj_id modulus number-of-stripe-units. And will then span all stripe-units in the same incrementing order wrapping back to the beginning of the device table. We call it a stripe-units moving window. Special consideration was taken to keep all devices in a mirror arrangement identical. So a broken osd-device could just be cloned from one of the mirrors and no FS scrubbing is needed. (We do that by rotating stripe-unit at a time and not a single device at a time.) TODO: We no longer verify object_length == inode->i_size in exofs_iget. (since i_size is stripped on multiple objects now). I should introduce a multiple-device attribute reading, and use it in exofs_iget. Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
2010-02-01 19:35:51 +08:00
/* switch (layout->lay_func) {
case LAYOUT_MOVING_WINDOW:
{*/
unsigned dev_mod = obj_no;
return (layout_index + dev_mod * layout->mirrors_p1) %
layout->s_numdevs;
/* }
case LAYOUT_FUNC_IMPLICT:
return layout->devs[layout_index];
}*/
exofs: Define on-disk per-inode optional layout attribute * Layouts describe the way a file is spread on multiple devices. The layout information is stored in the objects attribute introduced in this patch. * There can be multiple generating function for the layout. Currently defined: - No attribute present - use below moving-window on global device table, all devices. (This is the only one currently used in exofs) - an obj_id generated moving window - the obj_id is a randomizing factor in the otherwise global map layout. - An explicit layout stored, including a data_map and a device index list. - More might be defined in future ... * There are two attributes defined of the same structure: A-data-files-layout - This layout is used by data-files. If present at a directory, all files of that directory will be created with this layout. A-meta-data-layout - This layout is used by a directory and other meta-data information. Also inherited at creation of subdirectories. * At creation time inodes are created with the layout specified above. A usermode utility may change the creation layout on a give directory or file. Which in the case of directories, will also apply to newly created files/subdirectories, children of that directory. In the simple unaltered case of a newly created exofs, no layout attributes are present, and all layouts adhere to the layout specified at the device-table. * In case of a future file system loaded in an old exofs-driver. At iget(), the generating_function is inspected and if not supported will return an IO error to the application and the inode will not be loaded. So not to damage any data. Note: After this patch we do not yet support any type of layout only the RAID0 patch that enables striping at the super-block level will add support for RAID0 layouts above. This way we are past and future compatible and fully bisectable. * Access to the device table is done by an accessor since it will change according to above information. Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
2010-01-28 17:58:08 +08:00
}
static inline struct osd_dev *exofs_ios_od(struct exofs_io_state *ios,
unsigned layout_index)
{
return ios->layout->s_ods[
exofs_layout_od_id(ios->layout, ios->obj.id, layout_index)];
}
exofs: Move all operations to an io_engine In anticipation for multi-device operations, we separate osd operations into an abstract I/O API. Currently only one device is used but later when adding more devices, we will drive all devices in parallel according to a "data_map" that describes how data is arranged on multiple devices. The file system level operates, like before, as if there is one object (inode-number) and an i_size. The io engine will split this to the same object-number but on multiple device. At first we introduce Mirror (raid 1) layout. But at the final outcome we intend to fully implement the pNFS-Objects data-map, including raid 0,4,5,6 over mirrored devices, over multiple device-groups. And more. See: http://tools.ietf.org/html/draft-ietf-nfsv4-pnfs-obj-12 * Define an io_state based API for accessing osd storage devices in an abstract way. Usage: First a caller allocates an io state with: exofs_get_io_state(struct exofs_sb_info *sbi, struct exofs_io_state** ios); Then calles one of: exofs_sbi_create(struct exofs_io_state *ios); exofs_sbi_remove(struct exofs_io_state *ios); exofs_sbi_write(struct exofs_io_state *ios); exofs_sbi_read(struct exofs_io_state *ios); exofs_oi_truncate(struct exofs_i_info *oi, u64 new_len); And when done exofs_put_io_state(struct exofs_io_state *ios); * Convert all source files to use this new API * Convert from bio_alloc to bio_kmalloc * In io engine we make use of the now fixed osd_req_decode_sense There are no functional changes or on disk additions after this patch. Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
2009-11-08 20:54:08 +08:00
static void _sync_done(struct exofs_io_state *ios, void *p)
{
struct completion *waiting = p;
exofs: Move all operations to an io_engine In anticipation for multi-device operations, we separate osd operations into an abstract I/O API. Currently only one device is used but later when adding more devices, we will drive all devices in parallel according to a "data_map" that describes how data is arranged on multiple devices. The file system level operates, like before, as if there is one object (inode-number) and an i_size. The io engine will split this to the same object-number but on multiple device. At first we introduce Mirror (raid 1) layout. But at the final outcome we intend to fully implement the pNFS-Objects data-map, including raid 0,4,5,6 over mirrored devices, over multiple device-groups. And more. See: http://tools.ietf.org/html/draft-ietf-nfsv4-pnfs-obj-12 * Define an io_state based API for accessing osd storage devices in an abstract way. Usage: First a caller allocates an io state with: exofs_get_io_state(struct exofs_sb_info *sbi, struct exofs_io_state** ios); Then calles one of: exofs_sbi_create(struct exofs_io_state *ios); exofs_sbi_remove(struct exofs_io_state *ios); exofs_sbi_write(struct exofs_io_state *ios); exofs_sbi_read(struct exofs_io_state *ios); exofs_oi_truncate(struct exofs_i_info *oi, u64 new_len); And when done exofs_put_io_state(struct exofs_io_state *ios); * Convert all source files to use this new API * Convert from bio_alloc to bio_kmalloc * In io engine we make use of the now fixed osd_req_decode_sense There are no functional changes or on disk additions after this patch. Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
2009-11-08 20:54:08 +08:00
complete(waiting);
}
static void _last_io(struct kref *kref)
{
struct exofs_io_state *ios = container_of(
kref, struct exofs_io_state, kref);
ios->done(ios, ios->private);
}
static void _done_io(struct osd_request *or, void *p)
{
struct exofs_io_state *ios = p;
kref_put(&ios->kref, _last_io);
}
static int exofs_io_execute(struct exofs_io_state *ios)
{
DECLARE_COMPLETION_ONSTACK(wait);
bool sync = (ios->done == NULL);
int i, ret;
if (sync) {
ios->done = _sync_done;
ios->private = &wait;
}
for (i = 0; i < ios->numdevs; i++) {
struct osd_request *or = ios->per_dev[i].or;
if (unlikely(!or))
continue;
ret = osd_finalize_request(or, 0, ios->cred, NULL);
if (unlikely(ret)) {
EXOFS_DBGMSG("Failed to osd_finalize_request() => %d\n",
exofs: Move all operations to an io_engine In anticipation for multi-device operations, we separate osd operations into an abstract I/O API. Currently only one device is used but later when adding more devices, we will drive all devices in parallel according to a "data_map" that describes how data is arranged on multiple devices. The file system level operates, like before, as if there is one object (inode-number) and an i_size. The io engine will split this to the same object-number but on multiple device. At first we introduce Mirror (raid 1) layout. But at the final outcome we intend to fully implement the pNFS-Objects data-map, including raid 0,4,5,6 over mirrored devices, over multiple device-groups. And more. See: http://tools.ietf.org/html/draft-ietf-nfsv4-pnfs-obj-12 * Define an io_state based API for accessing osd storage devices in an abstract way. Usage: First a caller allocates an io state with: exofs_get_io_state(struct exofs_sb_info *sbi, struct exofs_io_state** ios); Then calles one of: exofs_sbi_create(struct exofs_io_state *ios); exofs_sbi_remove(struct exofs_io_state *ios); exofs_sbi_write(struct exofs_io_state *ios); exofs_sbi_read(struct exofs_io_state *ios); exofs_oi_truncate(struct exofs_i_info *oi, u64 new_len); And when done exofs_put_io_state(struct exofs_io_state *ios); * Convert all source files to use this new API * Convert from bio_alloc to bio_kmalloc * In io engine we make use of the now fixed osd_req_decode_sense There are no functional changes or on disk additions after this patch. Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
2009-11-08 20:54:08 +08:00
ret);
return ret;
}
}
kref_init(&ios->kref);
for (i = 0; i < ios->numdevs; i++) {
struct osd_request *or = ios->per_dev[i].or;
if (unlikely(!or))
continue;
kref_get(&ios->kref);
osd_execute_request_async(or, _done_io, ios);
}
kref_put(&ios->kref, _last_io);
ret = 0;
if (sync) {
wait_for_completion(&wait);
ret = exofs_check_io(ios, NULL);
}
return ret;
}
static void _clear_bio(struct bio *bio)
{
struct bio_vec *bv;
unsigned i;
__bio_for_each_segment(bv, bio, i, 0) {
unsigned this_count = bv->bv_len;
if (likely(PAGE_SIZE == this_count))
clear_highpage(bv->bv_page);
else
zero_user(bv->bv_page, bv->bv_offset, this_count);
}
}
exofs: Move all operations to an io_engine In anticipation for multi-device operations, we separate osd operations into an abstract I/O API. Currently only one device is used but later when adding more devices, we will drive all devices in parallel according to a "data_map" that describes how data is arranged on multiple devices. The file system level operates, like before, as if there is one object (inode-number) and an i_size. The io engine will split this to the same object-number but on multiple device. At first we introduce Mirror (raid 1) layout. But at the final outcome we intend to fully implement the pNFS-Objects data-map, including raid 0,4,5,6 over mirrored devices, over multiple device-groups. And more. See: http://tools.ietf.org/html/draft-ietf-nfsv4-pnfs-obj-12 * Define an io_state based API for accessing osd storage devices in an abstract way. Usage: First a caller allocates an io state with: exofs_get_io_state(struct exofs_sb_info *sbi, struct exofs_io_state** ios); Then calles one of: exofs_sbi_create(struct exofs_io_state *ios); exofs_sbi_remove(struct exofs_io_state *ios); exofs_sbi_write(struct exofs_io_state *ios); exofs_sbi_read(struct exofs_io_state *ios); exofs_oi_truncate(struct exofs_i_info *oi, u64 new_len); And when done exofs_put_io_state(struct exofs_io_state *ios); * Convert all source files to use this new API * Convert from bio_alloc to bio_kmalloc * In io engine we make use of the now fixed osd_req_decode_sense There are no functional changes or on disk additions after this patch. Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
2009-11-08 20:54:08 +08:00
int exofs_check_io(struct exofs_io_state *ios, u64 *resid)
{
exofs: Move all operations to an io_engine In anticipation for multi-device operations, we separate osd operations into an abstract I/O API. Currently only one device is used but later when adding more devices, we will drive all devices in parallel according to a "data_map" that describes how data is arranged on multiple devices. The file system level operates, like before, as if there is one object (inode-number) and an i_size. The io engine will split this to the same object-number but on multiple device. At first we introduce Mirror (raid 1) layout. But at the final outcome we intend to fully implement the pNFS-Objects data-map, including raid 0,4,5,6 over mirrored devices, over multiple device-groups. And more. See: http://tools.ietf.org/html/draft-ietf-nfsv4-pnfs-obj-12 * Define an io_state based API for accessing osd storage devices in an abstract way. Usage: First a caller allocates an io state with: exofs_get_io_state(struct exofs_sb_info *sbi, struct exofs_io_state** ios); Then calles one of: exofs_sbi_create(struct exofs_io_state *ios); exofs_sbi_remove(struct exofs_io_state *ios); exofs_sbi_write(struct exofs_io_state *ios); exofs_sbi_read(struct exofs_io_state *ios); exofs_oi_truncate(struct exofs_i_info *oi, u64 new_len); And when done exofs_put_io_state(struct exofs_io_state *ios); * Convert all source files to use this new API * Convert from bio_alloc to bio_kmalloc * In io engine we make use of the now fixed osd_req_decode_sense There are no functional changes or on disk additions after this patch. Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
2009-11-08 20:54:08 +08:00
enum osd_err_priority acumulated_osd_err = 0;
int acumulated_lin_err = 0;
int i;
exofs: Move all operations to an io_engine In anticipation for multi-device operations, we separate osd operations into an abstract I/O API. Currently only one device is used but later when adding more devices, we will drive all devices in parallel according to a "data_map" that describes how data is arranged on multiple devices. The file system level operates, like before, as if there is one object (inode-number) and an i_size. The io engine will split this to the same object-number but on multiple device. At first we introduce Mirror (raid 1) layout. But at the final outcome we intend to fully implement the pNFS-Objects data-map, including raid 0,4,5,6 over mirrored devices, over multiple device-groups. And more. See: http://tools.ietf.org/html/draft-ietf-nfsv4-pnfs-obj-12 * Define an io_state based API for accessing osd storage devices in an abstract way. Usage: First a caller allocates an io state with: exofs_get_io_state(struct exofs_sb_info *sbi, struct exofs_io_state** ios); Then calles one of: exofs_sbi_create(struct exofs_io_state *ios); exofs_sbi_remove(struct exofs_io_state *ios); exofs_sbi_write(struct exofs_io_state *ios); exofs_sbi_read(struct exofs_io_state *ios); exofs_oi_truncate(struct exofs_i_info *oi, u64 new_len); And when done exofs_put_io_state(struct exofs_io_state *ios); * Convert all source files to use this new API * Convert from bio_alloc to bio_kmalloc * In io engine we make use of the now fixed osd_req_decode_sense There are no functional changes or on disk additions after this patch. Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
2009-11-08 20:54:08 +08:00
for (i = 0; i < ios->numdevs; i++) {
struct osd_sense_info osi;
struct osd_request *or = ios->per_dev[i].or;
int ret;
if (unlikely(!or))
continue;
exofs: Move all operations to an io_engine In anticipation for multi-device operations, we separate osd operations into an abstract I/O API. Currently only one device is used but later when adding more devices, we will drive all devices in parallel according to a "data_map" that describes how data is arranged on multiple devices. The file system level operates, like before, as if there is one object (inode-number) and an i_size. The io engine will split this to the same object-number but on multiple device. At first we introduce Mirror (raid 1) layout. But at the final outcome we intend to fully implement the pNFS-Objects data-map, including raid 0,4,5,6 over mirrored devices, over multiple device-groups. And more. See: http://tools.ietf.org/html/draft-ietf-nfsv4-pnfs-obj-12 * Define an io_state based API for accessing osd storage devices in an abstract way. Usage: First a caller allocates an io state with: exofs_get_io_state(struct exofs_sb_info *sbi, struct exofs_io_state** ios); Then calles one of: exofs_sbi_create(struct exofs_io_state *ios); exofs_sbi_remove(struct exofs_io_state *ios); exofs_sbi_write(struct exofs_io_state *ios); exofs_sbi_read(struct exofs_io_state *ios); exofs_oi_truncate(struct exofs_i_info *oi, u64 new_len); And when done exofs_put_io_state(struct exofs_io_state *ios); * Convert all source files to use this new API * Convert from bio_alloc to bio_kmalloc * In io engine we make use of the now fixed osd_req_decode_sense There are no functional changes or on disk additions after this patch. Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
2009-11-08 20:54:08 +08:00
ret = osd_req_decode_sense(or, &osi);
exofs: Move all operations to an io_engine In anticipation for multi-device operations, we separate osd operations into an abstract I/O API. Currently only one device is used but later when adding more devices, we will drive all devices in parallel according to a "data_map" that describes how data is arranged on multiple devices. The file system level operates, like before, as if there is one object (inode-number) and an i_size. The io engine will split this to the same object-number but on multiple device. At first we introduce Mirror (raid 1) layout. But at the final outcome we intend to fully implement the pNFS-Objects data-map, including raid 0,4,5,6 over mirrored devices, over multiple device-groups. And more. See: http://tools.ietf.org/html/draft-ietf-nfsv4-pnfs-obj-12 * Define an io_state based API for accessing osd storage devices in an abstract way. Usage: First a caller allocates an io state with: exofs_get_io_state(struct exofs_sb_info *sbi, struct exofs_io_state** ios); Then calles one of: exofs_sbi_create(struct exofs_io_state *ios); exofs_sbi_remove(struct exofs_io_state *ios); exofs_sbi_write(struct exofs_io_state *ios); exofs_sbi_read(struct exofs_io_state *ios); exofs_oi_truncate(struct exofs_i_info *oi, u64 new_len); And when done exofs_put_io_state(struct exofs_io_state *ios); * Convert all source files to use this new API * Convert from bio_alloc to bio_kmalloc * In io engine we make use of the now fixed osd_req_decode_sense There are no functional changes or on disk additions after this patch. Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
2009-11-08 20:54:08 +08:00
if (likely(!ret))
continue;
if (OSD_ERR_PRI_CLEAR_PAGES == osi.osd_err_pri) {
/* start read offset passed endof file */
_clear_bio(ios->per_dev[i].bio);
EXOFS_DBGMSG("start read offset passed end of file "
"offset=0x%llx, length=0x%llx\n",
exofs: RAID0 support We now support striping over mirror devices. Including variable sized stripe_unit. Some limits: * stripe_unit must be a multiple of PAGE_SIZE * stripe_unit * stripe_count is maximum upto 32-bit (4Gb) Tested RAID0 over mirrors, RAID0 only, mirrors only. All check. Design notes: * I'm not using a vectored raid-engine mechanism yet. Following the pnfs-objects-layout data-map structure, "Mirror" is just a private case of "group_width" == 1, and RAID0 is a private case of "Mirrors" == 1. The performance lose of the general case over the particular special case optimization is totally negligible, also considering the extra code size. * In general I added a prepare_stripes() stage that divides the to-be-io pages to the participating devices, the previous exofs_ios_write/read, now becomes _write/read_mirrors and a new write/read upper layer loops on all devices calling _write/read_mirrors. Effectively the prepare_stripes stage is the all secret. Also truncate need fixing to accommodate for striping. * In a RAID0 arrangement, in a regular usage scenario, if all inode layouts will start at the same device, the small files fill up the first device and the later devices stay empty, the farther the device the emptier it is. To fix that, each inode will start at a different stripe_unit, according to it's obj_id modulus number-of-stripe-units. And will then span all stripe-units in the same incrementing order wrapping back to the beginning of the device table. We call it a stripe-units moving window. Special consideration was taken to keep all devices in a mirror arrangement identical. So a broken osd-device could just be cloned from one of the mirrors and no FS scrubbing is needed. (We do that by rotating stripe-unit at a time and not a single device at a time.) TODO: We no longer verify object_length == inode->i_size in exofs_iget. (since i_size is stripped on multiple objects now). I should introduce a multiple-device attribute reading, and use it in exofs_iget. Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
2010-02-01 19:35:51 +08:00
_LLU(ios->per_dev[i].offset),
_LLU(ios->per_dev[i].length));
continue; /* we recovered */
exofs: Move all operations to an io_engine In anticipation for multi-device operations, we separate osd operations into an abstract I/O API. Currently only one device is used but later when adding more devices, we will drive all devices in parallel according to a "data_map" that describes how data is arranged on multiple devices. The file system level operates, like before, as if there is one object (inode-number) and an i_size. The io engine will split this to the same object-number but on multiple device. At first we introduce Mirror (raid 1) layout. But at the final outcome we intend to fully implement the pNFS-Objects data-map, including raid 0,4,5,6 over mirrored devices, over multiple device-groups. And more. See: http://tools.ietf.org/html/draft-ietf-nfsv4-pnfs-obj-12 * Define an io_state based API for accessing osd storage devices in an abstract way. Usage: First a caller allocates an io state with: exofs_get_io_state(struct exofs_sb_info *sbi, struct exofs_io_state** ios); Then calles one of: exofs_sbi_create(struct exofs_io_state *ios); exofs_sbi_remove(struct exofs_io_state *ios); exofs_sbi_write(struct exofs_io_state *ios); exofs_sbi_read(struct exofs_io_state *ios); exofs_oi_truncate(struct exofs_i_info *oi, u64 new_len); And when done exofs_put_io_state(struct exofs_io_state *ios); * Convert all source files to use this new API * Convert from bio_alloc to bio_kmalloc * In io engine we make use of the now fixed osd_req_decode_sense There are no functional changes or on disk additions after this patch. Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
2009-11-08 20:54:08 +08:00
}
if (osi.osd_err_pri >= acumulated_osd_err) {
acumulated_osd_err = osi.osd_err_pri;
acumulated_lin_err = ret;
}
}
/* TODO: raid specific residual calculations */
if (resid) {
if (likely(!acumulated_lin_err))
*resid = 0;
else
*resid = ios->length;
}
return acumulated_lin_err;
}
/*
* L - logical offset into the file
*
* U - The number of bytes in a stripe within a group
*
* U = stripe_unit * group_width
*
* T - The number of bytes striped within a group of component objects
* (before advancing to the next group)
*
* T = stripe_unit * group_width * group_depth
*
* S - The number of bytes striped across all component objects
* before the pattern repeats
*
* S = stripe_unit * group_width * group_depth * group_count
*
* M - The "major" (i.e., across all components) stripe number
*
* M = L / S
*
* G - Counts the groups from the beginning of the major stripe
*
* G = (L - (M * S)) / T [or (L % S) / T]
*
* H - The byte offset within the group
*
* H = (L - (M * S)) % T [or (L % S) % T]
*
* N - The "minor" (i.e., across the group) stripe number
*
* N = H / U
*
* C - The component index coresponding to L
*
* C = (H - (N * U)) / stripe_unit + G * group_width
* [or (L % U) / stripe_unit + G * group_width]
*
* O - The component offset coresponding to L
*
* O = L % stripe_unit + N * stripe_unit + M * group_depth * stripe_unit
*/
struct _striping_info {
u64 obj_offset;
u64 group_length;
unsigned dev;
unsigned unit_off;
};
static void _calc_stripe_info(struct exofs_io_state *ios, u64 file_offset,
struct _striping_info *si)
exofs: RAID0 support We now support striping over mirror devices. Including variable sized stripe_unit. Some limits: * stripe_unit must be a multiple of PAGE_SIZE * stripe_unit * stripe_count is maximum upto 32-bit (4Gb) Tested RAID0 over mirrors, RAID0 only, mirrors only. All check. Design notes: * I'm not using a vectored raid-engine mechanism yet. Following the pnfs-objects-layout data-map structure, "Mirror" is just a private case of "group_width" == 1, and RAID0 is a private case of "Mirrors" == 1. The performance lose of the general case over the particular special case optimization is totally negligible, also considering the extra code size. * In general I added a prepare_stripes() stage that divides the to-be-io pages to the participating devices, the previous exofs_ios_write/read, now becomes _write/read_mirrors and a new write/read upper layer loops on all devices calling _write/read_mirrors. Effectively the prepare_stripes stage is the all secret. Also truncate need fixing to accommodate for striping. * In a RAID0 arrangement, in a regular usage scenario, if all inode layouts will start at the same device, the small files fill up the first device and the later devices stay empty, the farther the device the emptier it is. To fix that, each inode will start at a different stripe_unit, according to it's obj_id modulus number-of-stripe-units. And will then span all stripe-units in the same incrementing order wrapping back to the beginning of the device table. We call it a stripe-units moving window. Special consideration was taken to keep all devices in a mirror arrangement identical. So a broken osd-device could just be cloned from one of the mirrors and no FS scrubbing is needed. (We do that by rotating stripe-unit at a time and not a single device at a time.) TODO: We no longer verify object_length == inode->i_size in exofs_iget. (since i_size is stripped on multiple objects now). I should introduce a multiple-device attribute reading, and use it in exofs_iget. Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
2010-02-01 19:35:51 +08:00
{
u32 stripe_unit = ios->layout->stripe_unit;
u32 group_width = ios->layout->group_width;
u64 group_depth = ios->layout->group_depth;
u32 U = stripe_unit * group_width;
u64 T = U * group_depth;
u64 S = T * ios->layout->group_count;
u64 M = div64_u64(file_offset, S);
/*
G = (L - (M * S)) / T
H = (L - (M * S)) % T
*/
u64 LmodS = file_offset - M * S;
u32 G = div64_u64(LmodS, T);
u64 H = LmodS - G * T;
u32 N = div_u64(H, U);
/* "H - (N * U)" is just "H % U" so it's bound to u32 */
si->dev = (u32)(H - (N * U)) / stripe_unit + G * group_width;
si->dev *= ios->layout->mirrors_p1;
div_u64_rem(file_offset, stripe_unit, &si->unit_off);
exofs: RAID0 support We now support striping over mirror devices. Including variable sized stripe_unit. Some limits: * stripe_unit must be a multiple of PAGE_SIZE * stripe_unit * stripe_count is maximum upto 32-bit (4Gb) Tested RAID0 over mirrors, RAID0 only, mirrors only. All check. Design notes: * I'm not using a vectored raid-engine mechanism yet. Following the pnfs-objects-layout data-map structure, "Mirror" is just a private case of "group_width" == 1, and RAID0 is a private case of "Mirrors" == 1. The performance lose of the general case over the particular special case optimization is totally negligible, also considering the extra code size. * In general I added a prepare_stripes() stage that divides the to-be-io pages to the participating devices, the previous exofs_ios_write/read, now becomes _write/read_mirrors and a new write/read upper layer loops on all devices calling _write/read_mirrors. Effectively the prepare_stripes stage is the all secret. Also truncate need fixing to accommodate for striping. * In a RAID0 arrangement, in a regular usage scenario, if all inode layouts will start at the same device, the small files fill up the first device and the later devices stay empty, the farther the device the emptier it is. To fix that, each inode will start at a different stripe_unit, according to it's obj_id modulus number-of-stripe-units. And will then span all stripe-units in the same incrementing order wrapping back to the beginning of the device table. We call it a stripe-units moving window. Special consideration was taken to keep all devices in a mirror arrangement identical. So a broken osd-device could just be cloned from one of the mirrors and no FS scrubbing is needed. (We do that by rotating stripe-unit at a time and not a single device at a time.) TODO: We no longer verify object_length == inode->i_size in exofs_iget. (since i_size is stripped on multiple objects now). I should introduce a multiple-device attribute reading, and use it in exofs_iget. Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
2010-02-01 19:35:51 +08:00
si->obj_offset = si->unit_off + (N * stripe_unit) +
(M * group_depth * stripe_unit);
si->group_length = T - H;
exofs: RAID0 support We now support striping over mirror devices. Including variable sized stripe_unit. Some limits: * stripe_unit must be a multiple of PAGE_SIZE * stripe_unit * stripe_count is maximum upto 32-bit (4Gb) Tested RAID0 over mirrors, RAID0 only, mirrors only. All check. Design notes: * I'm not using a vectored raid-engine mechanism yet. Following the pnfs-objects-layout data-map structure, "Mirror" is just a private case of "group_width" == 1, and RAID0 is a private case of "Mirrors" == 1. The performance lose of the general case over the particular special case optimization is totally negligible, also considering the extra code size. * In general I added a prepare_stripes() stage that divides the to-be-io pages to the participating devices, the previous exofs_ios_write/read, now becomes _write/read_mirrors and a new write/read upper layer loops on all devices calling _write/read_mirrors. Effectively the prepare_stripes stage is the all secret. Also truncate need fixing to accommodate for striping. * In a RAID0 arrangement, in a regular usage scenario, if all inode layouts will start at the same device, the small files fill up the first device and the later devices stay empty, the farther the device the emptier it is. To fix that, each inode will start at a different stripe_unit, according to it's obj_id modulus number-of-stripe-units. And will then span all stripe-units in the same incrementing order wrapping back to the beginning of the device table. We call it a stripe-units moving window. Special consideration was taken to keep all devices in a mirror arrangement identical. So a broken osd-device could just be cloned from one of the mirrors and no FS scrubbing is needed. (We do that by rotating stripe-unit at a time and not a single device at a time.) TODO: We no longer verify object_length == inode->i_size in exofs_iget. (since i_size is stripped on multiple objects now). I should introduce a multiple-device attribute reading, and use it in exofs_iget. Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
2010-02-01 19:35:51 +08:00
}
static int _add_stripe_unit(struct exofs_io_state *ios, unsigned *cur_pg,
unsigned pgbase, struct exofs_per_dev_state *per_dev,
int cur_len)
exofs: RAID0 support We now support striping over mirror devices. Including variable sized stripe_unit. Some limits: * stripe_unit must be a multiple of PAGE_SIZE * stripe_unit * stripe_count is maximum upto 32-bit (4Gb) Tested RAID0 over mirrors, RAID0 only, mirrors only. All check. Design notes: * I'm not using a vectored raid-engine mechanism yet. Following the pnfs-objects-layout data-map structure, "Mirror" is just a private case of "group_width" == 1, and RAID0 is a private case of "Mirrors" == 1. The performance lose of the general case over the particular special case optimization is totally negligible, also considering the extra code size. * In general I added a prepare_stripes() stage that divides the to-be-io pages to the participating devices, the previous exofs_ios_write/read, now becomes _write/read_mirrors and a new write/read upper layer loops on all devices calling _write/read_mirrors. Effectively the prepare_stripes stage is the all secret. Also truncate need fixing to accommodate for striping. * In a RAID0 arrangement, in a regular usage scenario, if all inode layouts will start at the same device, the small files fill up the first device and the later devices stay empty, the farther the device the emptier it is. To fix that, each inode will start at a different stripe_unit, according to it's obj_id modulus number-of-stripe-units. And will then span all stripe-units in the same incrementing order wrapping back to the beginning of the device table. We call it a stripe-units moving window. Special consideration was taken to keep all devices in a mirror arrangement identical. So a broken osd-device could just be cloned from one of the mirrors and no FS scrubbing is needed. (We do that by rotating stripe-unit at a time and not a single device at a time.) TODO: We no longer verify object_length == inode->i_size in exofs_iget. (since i_size is stripped on multiple objects now). I should introduce a multiple-device attribute reading, and use it in exofs_iget. Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
2010-02-01 19:35:51 +08:00
{
unsigned pg = *cur_pg;
exofs: RAID0 support We now support striping over mirror devices. Including variable sized stripe_unit. Some limits: * stripe_unit must be a multiple of PAGE_SIZE * stripe_unit * stripe_count is maximum upto 32-bit (4Gb) Tested RAID0 over mirrors, RAID0 only, mirrors only. All check. Design notes: * I'm not using a vectored raid-engine mechanism yet. Following the pnfs-objects-layout data-map structure, "Mirror" is just a private case of "group_width" == 1, and RAID0 is a private case of "Mirrors" == 1. The performance lose of the general case over the particular special case optimization is totally negligible, also considering the extra code size. * In general I added a prepare_stripes() stage that divides the to-be-io pages to the participating devices, the previous exofs_ios_write/read, now becomes _write/read_mirrors and a new write/read upper layer loops on all devices calling _write/read_mirrors. Effectively the prepare_stripes stage is the all secret. Also truncate need fixing to accommodate for striping. * In a RAID0 arrangement, in a regular usage scenario, if all inode layouts will start at the same device, the small files fill up the first device and the later devices stay empty, the farther the device the emptier it is. To fix that, each inode will start at a different stripe_unit, according to it's obj_id modulus number-of-stripe-units. And will then span all stripe-units in the same incrementing order wrapping back to the beginning of the device table. We call it a stripe-units moving window. Special consideration was taken to keep all devices in a mirror arrangement identical. So a broken osd-device could just be cloned from one of the mirrors and no FS scrubbing is needed. (We do that by rotating stripe-unit at a time and not a single device at a time.) TODO: We no longer verify object_length == inode->i_size in exofs_iget. (since i_size is stripped on multiple objects now). I should introduce a multiple-device attribute reading, and use it in exofs_iget. Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
2010-02-01 19:35:51 +08:00
struct request_queue *q =
osd_request_queue(exofs_ios_od(ios, per_dev->dev));
per_dev->length += cur_len;
if (per_dev->bio == NULL) {
unsigned pages_in_stripe = ios->layout->group_width *
(ios->layout->stripe_unit / PAGE_SIZE);
unsigned bio_size = (ios->nr_pages + pages_in_stripe) /
exofs: RAID0 support We now support striping over mirror devices. Including variable sized stripe_unit. Some limits: * stripe_unit must be a multiple of PAGE_SIZE * stripe_unit * stripe_count is maximum upto 32-bit (4Gb) Tested RAID0 over mirrors, RAID0 only, mirrors only. All check. Design notes: * I'm not using a vectored raid-engine mechanism yet. Following the pnfs-objects-layout data-map structure, "Mirror" is just a private case of "group_width" == 1, and RAID0 is a private case of "Mirrors" == 1. The performance lose of the general case over the particular special case optimization is totally negligible, also considering the extra code size. * In general I added a prepare_stripes() stage that divides the to-be-io pages to the participating devices, the previous exofs_ios_write/read, now becomes _write/read_mirrors and a new write/read upper layer loops on all devices calling _write/read_mirrors. Effectively the prepare_stripes stage is the all secret. Also truncate need fixing to accommodate for striping. * In a RAID0 arrangement, in a regular usage scenario, if all inode layouts will start at the same device, the small files fill up the first device and the later devices stay empty, the farther the device the emptier it is. To fix that, each inode will start at a different stripe_unit, according to it's obj_id modulus number-of-stripe-units. And will then span all stripe-units in the same incrementing order wrapping back to the beginning of the device table. We call it a stripe-units moving window. Special consideration was taken to keep all devices in a mirror arrangement identical. So a broken osd-device could just be cloned from one of the mirrors and no FS scrubbing is needed. (We do that by rotating stripe-unit at a time and not a single device at a time.) TODO: We no longer verify object_length == inode->i_size in exofs_iget. (since i_size is stripped on multiple objects now). I should introduce a multiple-device attribute reading, and use it in exofs_iget. Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
2010-02-01 19:35:51 +08:00
ios->layout->group_width;
per_dev->bio = bio_kmalloc(GFP_KERNEL, bio_size);
if (unlikely(!per_dev->bio)) {
EXOFS_DBGMSG("Failed to allocate BIO size=%u\n",
exofs: RAID0 support We now support striping over mirror devices. Including variable sized stripe_unit. Some limits: * stripe_unit must be a multiple of PAGE_SIZE * stripe_unit * stripe_count is maximum upto 32-bit (4Gb) Tested RAID0 over mirrors, RAID0 only, mirrors only. All check. Design notes: * I'm not using a vectored raid-engine mechanism yet. Following the pnfs-objects-layout data-map structure, "Mirror" is just a private case of "group_width" == 1, and RAID0 is a private case of "Mirrors" == 1. The performance lose of the general case over the particular special case optimization is totally negligible, also considering the extra code size. * In general I added a prepare_stripes() stage that divides the to-be-io pages to the participating devices, the previous exofs_ios_write/read, now becomes _write/read_mirrors and a new write/read upper layer loops on all devices calling _write/read_mirrors. Effectively the prepare_stripes stage is the all secret. Also truncate need fixing to accommodate for striping. * In a RAID0 arrangement, in a regular usage scenario, if all inode layouts will start at the same device, the small files fill up the first device and the later devices stay empty, the farther the device the emptier it is. To fix that, each inode will start at a different stripe_unit, according to it's obj_id modulus number-of-stripe-units. And will then span all stripe-units in the same incrementing order wrapping back to the beginning of the device table. We call it a stripe-units moving window. Special consideration was taken to keep all devices in a mirror arrangement identical. So a broken osd-device could just be cloned from one of the mirrors and no FS scrubbing is needed. (We do that by rotating stripe-unit at a time and not a single device at a time.) TODO: We no longer verify object_length == inode->i_size in exofs_iget. (since i_size is stripped on multiple objects now). I should introduce a multiple-device attribute reading, and use it in exofs_iget. Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
2010-02-01 19:35:51 +08:00
bio_size);
return -ENOMEM;
}
}
while (cur_len > 0) {
unsigned pglen = min_t(unsigned, PAGE_SIZE - pgbase, cur_len);
unsigned added_len;
exofs: RAID0 support We now support striping over mirror devices. Including variable sized stripe_unit. Some limits: * stripe_unit must be a multiple of PAGE_SIZE * stripe_unit * stripe_count is maximum upto 32-bit (4Gb) Tested RAID0 over mirrors, RAID0 only, mirrors only. All check. Design notes: * I'm not using a vectored raid-engine mechanism yet. Following the pnfs-objects-layout data-map structure, "Mirror" is just a private case of "group_width" == 1, and RAID0 is a private case of "Mirrors" == 1. The performance lose of the general case over the particular special case optimization is totally negligible, also considering the extra code size. * In general I added a prepare_stripes() stage that divides the to-be-io pages to the participating devices, the previous exofs_ios_write/read, now becomes _write/read_mirrors and a new write/read upper layer loops on all devices calling _write/read_mirrors. Effectively the prepare_stripes stage is the all secret. Also truncate need fixing to accommodate for striping. * In a RAID0 arrangement, in a regular usage scenario, if all inode layouts will start at the same device, the small files fill up the first device and the later devices stay empty, the farther the device the emptier it is. To fix that, each inode will start at a different stripe_unit, according to it's obj_id modulus number-of-stripe-units. And will then span all stripe-units in the same incrementing order wrapping back to the beginning of the device table. We call it a stripe-units moving window. Special consideration was taken to keep all devices in a mirror arrangement identical. So a broken osd-device could just be cloned from one of the mirrors and no FS scrubbing is needed. (We do that by rotating stripe-unit at a time and not a single device at a time.) TODO: We no longer verify object_length == inode->i_size in exofs_iget. (since i_size is stripped on multiple objects now). I should introduce a multiple-device attribute reading, and use it in exofs_iget. Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
2010-02-01 19:35:51 +08:00
BUG_ON(ios->nr_pages <= pg);
cur_len -= pglen;
exofs: RAID0 support We now support striping over mirror devices. Including variable sized stripe_unit. Some limits: * stripe_unit must be a multiple of PAGE_SIZE * stripe_unit * stripe_count is maximum upto 32-bit (4Gb) Tested RAID0 over mirrors, RAID0 only, mirrors only. All check. Design notes: * I'm not using a vectored raid-engine mechanism yet. Following the pnfs-objects-layout data-map structure, "Mirror" is just a private case of "group_width" == 1, and RAID0 is a private case of "Mirrors" == 1. The performance lose of the general case over the particular special case optimization is totally negligible, also considering the extra code size. * In general I added a prepare_stripes() stage that divides the to-be-io pages to the participating devices, the previous exofs_ios_write/read, now becomes _write/read_mirrors and a new write/read upper layer loops on all devices calling _write/read_mirrors. Effectively the prepare_stripes stage is the all secret. Also truncate need fixing to accommodate for striping. * In a RAID0 arrangement, in a regular usage scenario, if all inode layouts will start at the same device, the small files fill up the first device and the later devices stay empty, the farther the device the emptier it is. To fix that, each inode will start at a different stripe_unit, according to it's obj_id modulus number-of-stripe-units. And will then span all stripe-units in the same incrementing order wrapping back to the beginning of the device table. We call it a stripe-units moving window. Special consideration was taken to keep all devices in a mirror arrangement identical. So a broken osd-device could just be cloned from one of the mirrors and no FS scrubbing is needed. (We do that by rotating stripe-unit at a time and not a single device at a time.) TODO: We no longer verify object_length == inode->i_size in exofs_iget. (since i_size is stripped on multiple objects now). I should introduce a multiple-device attribute reading, and use it in exofs_iget. Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
2010-02-01 19:35:51 +08:00
added_len = bio_add_pc_page(q, per_dev->bio, ios->pages[pg],
pglen, pgbase);
if (unlikely(pglen != added_len))
exofs: RAID0 support We now support striping over mirror devices. Including variable sized stripe_unit. Some limits: * stripe_unit must be a multiple of PAGE_SIZE * stripe_unit * stripe_count is maximum upto 32-bit (4Gb) Tested RAID0 over mirrors, RAID0 only, mirrors only. All check. Design notes: * I'm not using a vectored raid-engine mechanism yet. Following the pnfs-objects-layout data-map structure, "Mirror" is just a private case of "group_width" == 1, and RAID0 is a private case of "Mirrors" == 1. The performance lose of the general case over the particular special case optimization is totally negligible, also considering the extra code size. * In general I added a prepare_stripes() stage that divides the to-be-io pages to the participating devices, the previous exofs_ios_write/read, now becomes _write/read_mirrors and a new write/read upper layer loops on all devices calling _write/read_mirrors. Effectively the prepare_stripes stage is the all secret. Also truncate need fixing to accommodate for striping. * In a RAID0 arrangement, in a regular usage scenario, if all inode layouts will start at the same device, the small files fill up the first device and the later devices stay empty, the farther the device the emptier it is. To fix that, each inode will start at a different stripe_unit, according to it's obj_id modulus number-of-stripe-units. And will then span all stripe-units in the same incrementing order wrapping back to the beginning of the device table. We call it a stripe-units moving window. Special consideration was taken to keep all devices in a mirror arrangement identical. So a broken osd-device could just be cloned from one of the mirrors and no FS scrubbing is needed. (We do that by rotating stripe-unit at a time and not a single device at a time.) TODO: We no longer verify object_length == inode->i_size in exofs_iget. (since i_size is stripped on multiple objects now). I should introduce a multiple-device attribute reading, and use it in exofs_iget. Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
2010-02-01 19:35:51 +08:00
return -ENOMEM;
pgbase = 0;
++pg;
exofs: RAID0 support We now support striping over mirror devices. Including variable sized stripe_unit. Some limits: * stripe_unit must be a multiple of PAGE_SIZE * stripe_unit * stripe_count is maximum upto 32-bit (4Gb) Tested RAID0 over mirrors, RAID0 only, mirrors only. All check. Design notes: * I'm not using a vectored raid-engine mechanism yet. Following the pnfs-objects-layout data-map structure, "Mirror" is just a private case of "group_width" == 1, and RAID0 is a private case of "Mirrors" == 1. The performance lose of the general case over the particular special case optimization is totally negligible, also considering the extra code size. * In general I added a prepare_stripes() stage that divides the to-be-io pages to the participating devices, the previous exofs_ios_write/read, now becomes _write/read_mirrors and a new write/read upper layer loops on all devices calling _write/read_mirrors. Effectively the prepare_stripes stage is the all secret. Also truncate need fixing to accommodate for striping. * In a RAID0 arrangement, in a regular usage scenario, if all inode layouts will start at the same device, the small files fill up the first device and the later devices stay empty, the farther the device the emptier it is. To fix that, each inode will start at a different stripe_unit, according to it's obj_id modulus number-of-stripe-units. And will then span all stripe-units in the same incrementing order wrapping back to the beginning of the device table. We call it a stripe-units moving window. Special consideration was taken to keep all devices in a mirror arrangement identical. So a broken osd-device could just be cloned from one of the mirrors and no FS scrubbing is needed. (We do that by rotating stripe-unit at a time and not a single device at a time.) TODO: We no longer verify object_length == inode->i_size in exofs_iget. (since i_size is stripped on multiple objects now). I should introduce a multiple-device attribute reading, and use it in exofs_iget. Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
2010-02-01 19:35:51 +08:00
}
BUG_ON(cur_len);
*cur_pg = pg;
exofs: RAID0 support We now support striping over mirror devices. Including variable sized stripe_unit. Some limits: * stripe_unit must be a multiple of PAGE_SIZE * stripe_unit * stripe_count is maximum upto 32-bit (4Gb) Tested RAID0 over mirrors, RAID0 only, mirrors only. All check. Design notes: * I'm not using a vectored raid-engine mechanism yet. Following the pnfs-objects-layout data-map structure, "Mirror" is just a private case of "group_width" == 1, and RAID0 is a private case of "Mirrors" == 1. The performance lose of the general case over the particular special case optimization is totally negligible, also considering the extra code size. * In general I added a prepare_stripes() stage that divides the to-be-io pages to the participating devices, the previous exofs_ios_write/read, now becomes _write/read_mirrors and a new write/read upper layer loops on all devices calling _write/read_mirrors. Effectively the prepare_stripes stage is the all secret. Also truncate need fixing to accommodate for striping. * In a RAID0 arrangement, in a regular usage scenario, if all inode layouts will start at the same device, the small files fill up the first device and the later devices stay empty, the farther the device the emptier it is. To fix that, each inode will start at a different stripe_unit, according to it's obj_id modulus number-of-stripe-units. And will then span all stripe-units in the same incrementing order wrapping back to the beginning of the device table. We call it a stripe-units moving window. Special consideration was taken to keep all devices in a mirror arrangement identical. So a broken osd-device could just be cloned from one of the mirrors and no FS scrubbing is needed. (We do that by rotating stripe-unit at a time and not a single device at a time.) TODO: We no longer verify object_length == inode->i_size in exofs_iget. (since i_size is stripped on multiple objects now). I should introduce a multiple-device attribute reading, and use it in exofs_iget. Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
2010-02-01 19:35:51 +08:00
return 0;
}
static int _prepare_one_group(struct exofs_io_state *ios, u64 length,
struct _striping_info *si)
exofs: RAID0 support We now support striping over mirror devices. Including variable sized stripe_unit. Some limits: * stripe_unit must be a multiple of PAGE_SIZE * stripe_unit * stripe_count is maximum upto 32-bit (4Gb) Tested RAID0 over mirrors, RAID0 only, mirrors only. All check. Design notes: * I'm not using a vectored raid-engine mechanism yet. Following the pnfs-objects-layout data-map structure, "Mirror" is just a private case of "group_width" == 1, and RAID0 is a private case of "Mirrors" == 1. The performance lose of the general case over the particular special case optimization is totally negligible, also considering the extra code size. * In general I added a prepare_stripes() stage that divides the to-be-io pages to the participating devices, the previous exofs_ios_write/read, now becomes _write/read_mirrors and a new write/read upper layer loops on all devices calling _write/read_mirrors. Effectively the prepare_stripes stage is the all secret. Also truncate need fixing to accommodate for striping. * In a RAID0 arrangement, in a regular usage scenario, if all inode layouts will start at the same device, the small files fill up the first device and the later devices stay empty, the farther the device the emptier it is. To fix that, each inode will start at a different stripe_unit, according to it's obj_id modulus number-of-stripe-units. And will then span all stripe-units in the same incrementing order wrapping back to the beginning of the device table. We call it a stripe-units moving window. Special consideration was taken to keep all devices in a mirror arrangement identical. So a broken osd-device could just be cloned from one of the mirrors and no FS scrubbing is needed. (We do that by rotating stripe-unit at a time and not a single device at a time.) TODO: We no longer verify object_length == inode->i_size in exofs_iget. (since i_size is stripped on multiple objects now). I should introduce a multiple-device attribute reading, and use it in exofs_iget. Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
2010-02-01 19:35:51 +08:00
{
unsigned stripe_unit = ios->layout->stripe_unit;
unsigned mirrors_p1 = ios->layout->mirrors_p1;
unsigned devs_in_group = ios->layout->group_width * mirrors_p1;
unsigned dev = si->dev;
unsigned first_dev = dev - (dev % devs_in_group);
unsigned max_comp = ios->numdevs ? ios->numdevs - mirrors_p1 : 0;
unsigned cur_pg = ios->pages_consumed;
int ret = 0;
exofs: RAID0 support We now support striping over mirror devices. Including variable sized stripe_unit. Some limits: * stripe_unit must be a multiple of PAGE_SIZE * stripe_unit * stripe_count is maximum upto 32-bit (4Gb) Tested RAID0 over mirrors, RAID0 only, mirrors only. All check. Design notes: * I'm not using a vectored raid-engine mechanism yet. Following the pnfs-objects-layout data-map structure, "Mirror" is just a private case of "group_width" == 1, and RAID0 is a private case of "Mirrors" == 1. The performance lose of the general case over the particular special case optimization is totally negligible, also considering the extra code size. * In general I added a prepare_stripes() stage that divides the to-be-io pages to the participating devices, the previous exofs_ios_write/read, now becomes _write/read_mirrors and a new write/read upper layer loops on all devices calling _write/read_mirrors. Effectively the prepare_stripes stage is the all secret. Also truncate need fixing to accommodate for striping. * In a RAID0 arrangement, in a regular usage scenario, if all inode layouts will start at the same device, the small files fill up the first device and the later devices stay empty, the farther the device the emptier it is. To fix that, each inode will start at a different stripe_unit, according to it's obj_id modulus number-of-stripe-units. And will then span all stripe-units in the same incrementing order wrapping back to the beginning of the device table. We call it a stripe-units moving window. Special consideration was taken to keep all devices in a mirror arrangement identical. So a broken osd-device could just be cloned from one of the mirrors and no FS scrubbing is needed. (We do that by rotating stripe-unit at a time and not a single device at a time.) TODO: We no longer verify object_length == inode->i_size in exofs_iget. (since i_size is stripped on multiple objects now). I should introduce a multiple-device attribute reading, and use it in exofs_iget. Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
2010-02-01 19:35:51 +08:00
while (length) {
struct exofs_per_dev_state *per_dev = &ios->per_dev[dev];
unsigned cur_len, page_off = 0;
exofs: RAID0 support We now support striping over mirror devices. Including variable sized stripe_unit. Some limits: * stripe_unit must be a multiple of PAGE_SIZE * stripe_unit * stripe_count is maximum upto 32-bit (4Gb) Tested RAID0 over mirrors, RAID0 only, mirrors only. All check. Design notes: * I'm not using a vectored raid-engine mechanism yet. Following the pnfs-objects-layout data-map structure, "Mirror" is just a private case of "group_width" == 1, and RAID0 is a private case of "Mirrors" == 1. The performance lose of the general case over the particular special case optimization is totally negligible, also considering the extra code size. * In general I added a prepare_stripes() stage that divides the to-be-io pages to the participating devices, the previous exofs_ios_write/read, now becomes _write/read_mirrors and a new write/read upper layer loops on all devices calling _write/read_mirrors. Effectively the prepare_stripes stage is the all secret. Also truncate need fixing to accommodate for striping. * In a RAID0 arrangement, in a regular usage scenario, if all inode layouts will start at the same device, the small files fill up the first device and the later devices stay empty, the farther the device the emptier it is. To fix that, each inode will start at a different stripe_unit, according to it's obj_id modulus number-of-stripe-units. And will then span all stripe-units in the same incrementing order wrapping back to the beginning of the device table. We call it a stripe-units moving window. Special consideration was taken to keep all devices in a mirror arrangement identical. So a broken osd-device could just be cloned from one of the mirrors and no FS scrubbing is needed. (We do that by rotating stripe-unit at a time and not a single device at a time.) TODO: We no longer verify object_length == inode->i_size in exofs_iget. (since i_size is stripped on multiple objects now). I should introduce a multiple-device attribute reading, and use it in exofs_iget. Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
2010-02-01 19:35:51 +08:00
if (!per_dev->length) {
per_dev->dev = dev;
if (dev < si->dev) {
per_dev->offset = si->obj_offset + stripe_unit -
si->unit_off;
cur_len = stripe_unit;
} else if (dev == si->dev) {
per_dev->offset = si->obj_offset;
cur_len = stripe_unit - si->unit_off;
page_off = si->unit_off & ~PAGE_MASK;
BUG_ON(page_off && (page_off != ios->pgbase));
} else { /* dev > si->dev */
per_dev->offset = si->obj_offset - si->unit_off;
cur_len = stripe_unit;
}
exofs: RAID0 support We now support striping over mirror devices. Including variable sized stripe_unit. Some limits: * stripe_unit must be a multiple of PAGE_SIZE * stripe_unit * stripe_count is maximum upto 32-bit (4Gb) Tested RAID0 over mirrors, RAID0 only, mirrors only. All check. Design notes: * I'm not using a vectored raid-engine mechanism yet. Following the pnfs-objects-layout data-map structure, "Mirror" is just a private case of "group_width" == 1, and RAID0 is a private case of "Mirrors" == 1. The performance lose of the general case over the particular special case optimization is totally negligible, also considering the extra code size. * In general I added a prepare_stripes() stage that divides the to-be-io pages to the participating devices, the previous exofs_ios_write/read, now becomes _write/read_mirrors and a new write/read upper layer loops on all devices calling _write/read_mirrors. Effectively the prepare_stripes stage is the all secret. Also truncate need fixing to accommodate for striping. * In a RAID0 arrangement, in a regular usage scenario, if all inode layouts will start at the same device, the small files fill up the first device and the later devices stay empty, the farther the device the emptier it is. To fix that, each inode will start at a different stripe_unit, according to it's obj_id modulus number-of-stripe-units. And will then span all stripe-units in the same incrementing order wrapping back to the beginning of the device table. We call it a stripe-units moving window. Special consideration was taken to keep all devices in a mirror arrangement identical. So a broken osd-device could just be cloned from one of the mirrors and no FS scrubbing is needed. (We do that by rotating stripe-unit at a time and not a single device at a time.) TODO: We no longer verify object_length == inode->i_size in exofs_iget. (since i_size is stripped on multiple objects now). I should introduce a multiple-device attribute reading, and use it in exofs_iget. Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
2010-02-01 19:35:51 +08:00
if (max_comp < dev)
max_comp = dev;
exofs: RAID0 support We now support striping over mirror devices. Including variable sized stripe_unit. Some limits: * stripe_unit must be a multiple of PAGE_SIZE * stripe_unit * stripe_count is maximum upto 32-bit (4Gb) Tested RAID0 over mirrors, RAID0 only, mirrors only. All check. Design notes: * I'm not using a vectored raid-engine mechanism yet. Following the pnfs-objects-layout data-map structure, "Mirror" is just a private case of "group_width" == 1, and RAID0 is a private case of "Mirrors" == 1. The performance lose of the general case over the particular special case optimization is totally negligible, also considering the extra code size. * In general I added a prepare_stripes() stage that divides the to-be-io pages to the participating devices, the previous exofs_ios_write/read, now becomes _write/read_mirrors and a new write/read upper layer loops on all devices calling _write/read_mirrors. Effectively the prepare_stripes stage is the all secret. Also truncate need fixing to accommodate for striping. * In a RAID0 arrangement, in a regular usage scenario, if all inode layouts will start at the same device, the small files fill up the first device and the later devices stay empty, the farther the device the emptier it is. To fix that, each inode will start at a different stripe_unit, according to it's obj_id modulus number-of-stripe-units. And will then span all stripe-units in the same incrementing order wrapping back to the beginning of the device table. We call it a stripe-units moving window. Special consideration was taken to keep all devices in a mirror arrangement identical. So a broken osd-device could just be cloned from one of the mirrors and no FS scrubbing is needed. (We do that by rotating stripe-unit at a time and not a single device at a time.) TODO: We no longer verify object_length == inode->i_size in exofs_iget. (since i_size is stripped on multiple objects now). I should introduce a multiple-device attribute reading, and use it in exofs_iget. Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
2010-02-01 19:35:51 +08:00
} else {
cur_len = stripe_unit;
exofs: RAID0 support We now support striping over mirror devices. Including variable sized stripe_unit. Some limits: * stripe_unit must be a multiple of PAGE_SIZE * stripe_unit * stripe_count is maximum upto 32-bit (4Gb) Tested RAID0 over mirrors, RAID0 only, mirrors only. All check. Design notes: * I'm not using a vectored raid-engine mechanism yet. Following the pnfs-objects-layout data-map structure, "Mirror" is just a private case of "group_width" == 1, and RAID0 is a private case of "Mirrors" == 1. The performance lose of the general case over the particular special case optimization is totally negligible, also considering the extra code size. * In general I added a prepare_stripes() stage that divides the to-be-io pages to the participating devices, the previous exofs_ios_write/read, now becomes _write/read_mirrors and a new write/read upper layer loops on all devices calling _write/read_mirrors. Effectively the prepare_stripes stage is the all secret. Also truncate need fixing to accommodate for striping. * In a RAID0 arrangement, in a regular usage scenario, if all inode layouts will start at the same device, the small files fill up the first device and the later devices stay empty, the farther the device the emptier it is. To fix that, each inode will start at a different stripe_unit, according to it's obj_id modulus number-of-stripe-units. And will then span all stripe-units in the same incrementing order wrapping back to the beginning of the device table. We call it a stripe-units moving window. Special consideration was taken to keep all devices in a mirror arrangement identical. So a broken osd-device could just be cloned from one of the mirrors and no FS scrubbing is needed. (We do that by rotating stripe-unit at a time and not a single device at a time.) TODO: We no longer verify object_length == inode->i_size in exofs_iget. (since i_size is stripped on multiple objects now). I should introduce a multiple-device attribute reading, and use it in exofs_iget. Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
2010-02-01 19:35:51 +08:00
}
if (cur_len >= length)
cur_len = length;
exofs: RAID0 support We now support striping over mirror devices. Including variable sized stripe_unit. Some limits: * stripe_unit must be a multiple of PAGE_SIZE * stripe_unit * stripe_count is maximum upto 32-bit (4Gb) Tested RAID0 over mirrors, RAID0 only, mirrors only. All check. Design notes: * I'm not using a vectored raid-engine mechanism yet. Following the pnfs-objects-layout data-map structure, "Mirror" is just a private case of "group_width" == 1, and RAID0 is a private case of "Mirrors" == 1. The performance lose of the general case over the particular special case optimization is totally negligible, also considering the extra code size. * In general I added a prepare_stripes() stage that divides the to-be-io pages to the participating devices, the previous exofs_ios_write/read, now becomes _write/read_mirrors and a new write/read upper layer loops on all devices calling _write/read_mirrors. Effectively the prepare_stripes stage is the all secret. Also truncate need fixing to accommodate for striping. * In a RAID0 arrangement, in a regular usage scenario, if all inode layouts will start at the same device, the small files fill up the first device and the later devices stay empty, the farther the device the emptier it is. To fix that, each inode will start at a different stripe_unit, according to it's obj_id modulus number-of-stripe-units. And will then span all stripe-units in the same incrementing order wrapping back to the beginning of the device table. We call it a stripe-units moving window. Special consideration was taken to keep all devices in a mirror arrangement identical. So a broken osd-device could just be cloned from one of the mirrors and no FS scrubbing is needed. (We do that by rotating stripe-unit at a time and not a single device at a time.) TODO: We no longer verify object_length == inode->i_size in exofs_iget. (since i_size is stripped on multiple objects now). I should introduce a multiple-device attribute reading, and use it in exofs_iget. Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
2010-02-01 19:35:51 +08:00
ret = _add_stripe_unit(ios, &cur_pg, page_off , per_dev,
cur_len);
exofs: RAID0 support We now support striping over mirror devices. Including variable sized stripe_unit. Some limits: * stripe_unit must be a multiple of PAGE_SIZE * stripe_unit * stripe_count is maximum upto 32-bit (4Gb) Tested RAID0 over mirrors, RAID0 only, mirrors only. All check. Design notes: * I'm not using a vectored raid-engine mechanism yet. Following the pnfs-objects-layout data-map structure, "Mirror" is just a private case of "group_width" == 1, and RAID0 is a private case of "Mirrors" == 1. The performance lose of the general case over the particular special case optimization is totally negligible, also considering the extra code size. * In general I added a prepare_stripes() stage that divides the to-be-io pages to the participating devices, the previous exofs_ios_write/read, now becomes _write/read_mirrors and a new write/read upper layer loops on all devices calling _write/read_mirrors. Effectively the prepare_stripes stage is the all secret. Also truncate need fixing to accommodate for striping. * In a RAID0 arrangement, in a regular usage scenario, if all inode layouts will start at the same device, the small files fill up the first device and the later devices stay empty, the farther the device the emptier it is. To fix that, each inode will start at a different stripe_unit, according to it's obj_id modulus number-of-stripe-units. And will then span all stripe-units in the same incrementing order wrapping back to the beginning of the device table. We call it a stripe-units moving window. Special consideration was taken to keep all devices in a mirror arrangement identical. So a broken osd-device could just be cloned from one of the mirrors and no FS scrubbing is needed. (We do that by rotating stripe-unit at a time and not a single device at a time.) TODO: We no longer verify object_length == inode->i_size in exofs_iget. (since i_size is stripped on multiple objects now). I should introduce a multiple-device attribute reading, and use it in exofs_iget. Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
2010-02-01 19:35:51 +08:00
if (unlikely(ret))
goto out;
dev += mirrors_p1;
dev = (dev % devs_in_group) + first_dev;
exofs: RAID0 support We now support striping over mirror devices. Including variable sized stripe_unit. Some limits: * stripe_unit must be a multiple of PAGE_SIZE * stripe_unit * stripe_count is maximum upto 32-bit (4Gb) Tested RAID0 over mirrors, RAID0 only, mirrors only. All check. Design notes: * I'm not using a vectored raid-engine mechanism yet. Following the pnfs-objects-layout data-map structure, "Mirror" is just a private case of "group_width" == 1, and RAID0 is a private case of "Mirrors" == 1. The performance lose of the general case over the particular special case optimization is totally negligible, also considering the extra code size. * In general I added a prepare_stripes() stage that divides the to-be-io pages to the participating devices, the previous exofs_ios_write/read, now becomes _write/read_mirrors and a new write/read upper layer loops on all devices calling _write/read_mirrors. Effectively the prepare_stripes stage is the all secret. Also truncate need fixing to accommodate for striping. * In a RAID0 arrangement, in a regular usage scenario, if all inode layouts will start at the same device, the small files fill up the first device and the later devices stay empty, the farther the device the emptier it is. To fix that, each inode will start at a different stripe_unit, according to it's obj_id modulus number-of-stripe-units. And will then span all stripe-units in the same incrementing order wrapping back to the beginning of the device table. We call it a stripe-units moving window. Special consideration was taken to keep all devices in a mirror arrangement identical. So a broken osd-device could just be cloned from one of the mirrors and no FS scrubbing is needed. (We do that by rotating stripe-unit at a time and not a single device at a time.) TODO: We no longer verify object_length == inode->i_size in exofs_iget. (since i_size is stripped on multiple objects now). I should introduce a multiple-device attribute reading, and use it in exofs_iget. Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
2010-02-01 19:35:51 +08:00
length -= cur_len;
}
out:
ios->numdevs = max_comp + mirrors_p1;
ios->pages_consumed = cur_pg;
exofs: RAID0 support We now support striping over mirror devices. Including variable sized stripe_unit. Some limits: * stripe_unit must be a multiple of PAGE_SIZE * stripe_unit * stripe_count is maximum upto 32-bit (4Gb) Tested RAID0 over mirrors, RAID0 only, mirrors only. All check. Design notes: * I'm not using a vectored raid-engine mechanism yet. Following the pnfs-objects-layout data-map structure, "Mirror" is just a private case of "group_width" == 1, and RAID0 is a private case of "Mirrors" == 1. The performance lose of the general case over the particular special case optimization is totally negligible, also considering the extra code size. * In general I added a prepare_stripes() stage that divides the to-be-io pages to the participating devices, the previous exofs_ios_write/read, now becomes _write/read_mirrors and a new write/read upper layer loops on all devices calling _write/read_mirrors. Effectively the prepare_stripes stage is the all secret. Also truncate need fixing to accommodate for striping. * In a RAID0 arrangement, in a regular usage scenario, if all inode layouts will start at the same device, the small files fill up the first device and the later devices stay empty, the farther the device the emptier it is. To fix that, each inode will start at a different stripe_unit, according to it's obj_id modulus number-of-stripe-units. And will then span all stripe-units in the same incrementing order wrapping back to the beginning of the device table. We call it a stripe-units moving window. Special consideration was taken to keep all devices in a mirror arrangement identical. So a broken osd-device could just be cloned from one of the mirrors and no FS scrubbing is needed. (We do that by rotating stripe-unit at a time and not a single device at a time.) TODO: We no longer verify object_length == inode->i_size in exofs_iget. (since i_size is stripped on multiple objects now). I should introduce a multiple-device attribute reading, and use it in exofs_iget. Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
2010-02-01 19:35:51 +08:00
return ret;
}
static int _prepare_for_striping(struct exofs_io_state *ios)
{
u64 length = ios->length;
u64 offset = ios->offset;
struct _striping_info si;
int ret = 0;
if (!ios->pages) {
if (ios->kern_buff) {
struct exofs_per_dev_state *per_dev = &ios->per_dev[0];
_calc_stripe_info(ios, ios->offset, &si);
per_dev->offset = si.obj_offset;
per_dev->dev = si.dev;
/* no cross device without page array */
BUG_ON((ios->layout->group_width > 1) &&
(si.unit_off + ios->length >
ios->layout->stripe_unit));
}
ios->numdevs = ios->layout->mirrors_p1;
return 0;
}
while (length) {
_calc_stripe_info(ios, offset, &si);
if (length < si.group_length)
si.group_length = length;
ret = _prepare_one_group(ios, si.group_length, &si);
if (unlikely(ret))
goto out;
offset += si.group_length;
length -= si.group_length;
}
out:
return ret;
}
exofs: Move all operations to an io_engine In anticipation for multi-device operations, we separate osd operations into an abstract I/O API. Currently only one device is used but later when adding more devices, we will drive all devices in parallel according to a "data_map" that describes how data is arranged on multiple devices. The file system level operates, like before, as if there is one object (inode-number) and an i_size. The io engine will split this to the same object-number but on multiple device. At first we introduce Mirror (raid 1) layout. But at the final outcome we intend to fully implement the pNFS-Objects data-map, including raid 0,4,5,6 over mirrored devices, over multiple device-groups. And more. See: http://tools.ietf.org/html/draft-ietf-nfsv4-pnfs-obj-12 * Define an io_state based API for accessing osd storage devices in an abstract way. Usage: First a caller allocates an io state with: exofs_get_io_state(struct exofs_sb_info *sbi, struct exofs_io_state** ios); Then calles one of: exofs_sbi_create(struct exofs_io_state *ios); exofs_sbi_remove(struct exofs_io_state *ios); exofs_sbi_write(struct exofs_io_state *ios); exofs_sbi_read(struct exofs_io_state *ios); exofs_oi_truncate(struct exofs_i_info *oi, u64 new_len); And when done exofs_put_io_state(struct exofs_io_state *ios); * Convert all source files to use this new API * Convert from bio_alloc to bio_kmalloc * In io engine we make use of the now fixed osd_req_decode_sense There are no functional changes or on disk additions after this patch. Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
2009-11-08 20:54:08 +08:00
int exofs_sbi_create(struct exofs_io_state *ios)
{
int i, ret;
for (i = 0; i < ios->layout->s_numdevs; i++) {
exofs: Move all operations to an io_engine In anticipation for multi-device operations, we separate osd operations into an abstract I/O API. Currently only one device is used but later when adding more devices, we will drive all devices in parallel according to a "data_map" that describes how data is arranged on multiple devices. The file system level operates, like before, as if there is one object (inode-number) and an i_size. The io engine will split this to the same object-number but on multiple device. At first we introduce Mirror (raid 1) layout. But at the final outcome we intend to fully implement the pNFS-Objects data-map, including raid 0,4,5,6 over mirrored devices, over multiple device-groups. And more. See: http://tools.ietf.org/html/draft-ietf-nfsv4-pnfs-obj-12 * Define an io_state based API for accessing osd storage devices in an abstract way. Usage: First a caller allocates an io state with: exofs_get_io_state(struct exofs_sb_info *sbi, struct exofs_io_state** ios); Then calles one of: exofs_sbi_create(struct exofs_io_state *ios); exofs_sbi_remove(struct exofs_io_state *ios); exofs_sbi_write(struct exofs_io_state *ios); exofs_sbi_read(struct exofs_io_state *ios); exofs_oi_truncate(struct exofs_i_info *oi, u64 new_len); And when done exofs_put_io_state(struct exofs_io_state *ios); * Convert all source files to use this new API * Convert from bio_alloc to bio_kmalloc * In io engine we make use of the now fixed osd_req_decode_sense There are no functional changes or on disk additions after this patch. Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
2009-11-08 20:54:08 +08:00
struct osd_request *or;
exofs: Define on-disk per-inode optional layout attribute * Layouts describe the way a file is spread on multiple devices. The layout information is stored in the objects attribute introduced in this patch. * There can be multiple generating function for the layout. Currently defined: - No attribute present - use below moving-window on global device table, all devices. (This is the only one currently used in exofs) - an obj_id generated moving window - the obj_id is a randomizing factor in the otherwise global map layout. - An explicit layout stored, including a data_map and a device index list. - More might be defined in future ... * There are two attributes defined of the same structure: A-data-files-layout - This layout is used by data-files. If present at a directory, all files of that directory will be created with this layout. A-meta-data-layout - This layout is used by a directory and other meta-data information. Also inherited at creation of subdirectories. * At creation time inodes are created with the layout specified above. A usermode utility may change the creation layout on a give directory or file. Which in the case of directories, will also apply to newly created files/subdirectories, children of that directory. In the simple unaltered case of a newly created exofs, no layout attributes are present, and all layouts adhere to the layout specified at the device-table. * In case of a future file system loaded in an old exofs-driver. At iget(), the generating_function is inspected and if not supported will return an IO error to the application and the inode will not be loaded. So not to damage any data. Note: After this patch we do not yet support any type of layout only the RAID0 patch that enables striping at the super-block level will add support for RAID0 layouts above. This way we are past and future compatible and fully bisectable. * Access to the device table is done by an accessor since it will change according to above information. Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
2010-01-28 17:58:08 +08:00
or = osd_start_request(exofs_ios_od(ios, i), GFP_KERNEL);
exofs: Move all operations to an io_engine In anticipation for multi-device operations, we separate osd operations into an abstract I/O API. Currently only one device is used but later when adding more devices, we will drive all devices in parallel according to a "data_map" that describes how data is arranged on multiple devices. The file system level operates, like before, as if there is one object (inode-number) and an i_size. The io engine will split this to the same object-number but on multiple device. At first we introduce Mirror (raid 1) layout. But at the final outcome we intend to fully implement the pNFS-Objects data-map, including raid 0,4,5,6 over mirrored devices, over multiple device-groups. And more. See: http://tools.ietf.org/html/draft-ietf-nfsv4-pnfs-obj-12 * Define an io_state based API for accessing osd storage devices in an abstract way. Usage: First a caller allocates an io state with: exofs_get_io_state(struct exofs_sb_info *sbi, struct exofs_io_state** ios); Then calles one of: exofs_sbi_create(struct exofs_io_state *ios); exofs_sbi_remove(struct exofs_io_state *ios); exofs_sbi_write(struct exofs_io_state *ios); exofs_sbi_read(struct exofs_io_state *ios); exofs_oi_truncate(struct exofs_i_info *oi, u64 new_len); And when done exofs_put_io_state(struct exofs_io_state *ios); * Convert all source files to use this new API * Convert from bio_alloc to bio_kmalloc * In io engine we make use of the now fixed osd_req_decode_sense There are no functional changes or on disk additions after this patch. Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
2009-11-08 20:54:08 +08:00
if (unlikely(!or)) {
EXOFS_ERR("%s: osd_start_request failed\n", __func__);
ret = -ENOMEM;
goto out;
}
ios->per_dev[i].or = or;
ios->numdevs++;
osd_req_create_object(or, &ios->obj);
}
ret = exofs_io_execute(ios);
out:
return ret;
}
int exofs_sbi_remove(struct exofs_io_state *ios)
{
int i, ret;
for (i = 0; i < ios->layout->s_numdevs; i++) {
exofs: Move all operations to an io_engine In anticipation for multi-device operations, we separate osd operations into an abstract I/O API. Currently only one device is used but later when adding more devices, we will drive all devices in parallel according to a "data_map" that describes how data is arranged on multiple devices. The file system level operates, like before, as if there is one object (inode-number) and an i_size. The io engine will split this to the same object-number but on multiple device. At first we introduce Mirror (raid 1) layout. But at the final outcome we intend to fully implement the pNFS-Objects data-map, including raid 0,4,5,6 over mirrored devices, over multiple device-groups. And more. See: http://tools.ietf.org/html/draft-ietf-nfsv4-pnfs-obj-12 * Define an io_state based API for accessing osd storage devices in an abstract way. Usage: First a caller allocates an io state with: exofs_get_io_state(struct exofs_sb_info *sbi, struct exofs_io_state** ios); Then calles one of: exofs_sbi_create(struct exofs_io_state *ios); exofs_sbi_remove(struct exofs_io_state *ios); exofs_sbi_write(struct exofs_io_state *ios); exofs_sbi_read(struct exofs_io_state *ios); exofs_oi_truncate(struct exofs_i_info *oi, u64 new_len); And when done exofs_put_io_state(struct exofs_io_state *ios); * Convert all source files to use this new API * Convert from bio_alloc to bio_kmalloc * In io engine we make use of the now fixed osd_req_decode_sense There are no functional changes or on disk additions after this patch. Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
2009-11-08 20:54:08 +08:00
struct osd_request *or;
exofs: Define on-disk per-inode optional layout attribute * Layouts describe the way a file is spread on multiple devices. The layout information is stored in the objects attribute introduced in this patch. * There can be multiple generating function for the layout. Currently defined: - No attribute present - use below moving-window on global device table, all devices. (This is the only one currently used in exofs) - an obj_id generated moving window - the obj_id is a randomizing factor in the otherwise global map layout. - An explicit layout stored, including a data_map and a device index list. - More might be defined in future ... * There are two attributes defined of the same structure: A-data-files-layout - This layout is used by data-files. If present at a directory, all files of that directory will be created with this layout. A-meta-data-layout - This layout is used by a directory and other meta-data information. Also inherited at creation of subdirectories. * At creation time inodes are created with the layout specified above. A usermode utility may change the creation layout on a give directory or file. Which in the case of directories, will also apply to newly created files/subdirectories, children of that directory. In the simple unaltered case of a newly created exofs, no layout attributes are present, and all layouts adhere to the layout specified at the device-table. * In case of a future file system loaded in an old exofs-driver. At iget(), the generating_function is inspected and if not supported will return an IO error to the application and the inode will not be loaded. So not to damage any data. Note: After this patch we do not yet support any type of layout only the RAID0 patch that enables striping at the super-block level will add support for RAID0 layouts above. This way we are past and future compatible and fully bisectable. * Access to the device table is done by an accessor since it will change according to above information. Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
2010-01-28 17:58:08 +08:00
or = osd_start_request(exofs_ios_od(ios, i), GFP_KERNEL);
exofs: Move all operations to an io_engine In anticipation for multi-device operations, we separate osd operations into an abstract I/O API. Currently only one device is used but later when adding more devices, we will drive all devices in parallel according to a "data_map" that describes how data is arranged on multiple devices. The file system level operates, like before, as if there is one object (inode-number) and an i_size. The io engine will split this to the same object-number but on multiple device. At first we introduce Mirror (raid 1) layout. But at the final outcome we intend to fully implement the pNFS-Objects data-map, including raid 0,4,5,6 over mirrored devices, over multiple device-groups. And more. See: http://tools.ietf.org/html/draft-ietf-nfsv4-pnfs-obj-12 * Define an io_state based API for accessing osd storage devices in an abstract way. Usage: First a caller allocates an io state with: exofs_get_io_state(struct exofs_sb_info *sbi, struct exofs_io_state** ios); Then calles one of: exofs_sbi_create(struct exofs_io_state *ios); exofs_sbi_remove(struct exofs_io_state *ios); exofs_sbi_write(struct exofs_io_state *ios); exofs_sbi_read(struct exofs_io_state *ios); exofs_oi_truncate(struct exofs_i_info *oi, u64 new_len); And when done exofs_put_io_state(struct exofs_io_state *ios); * Convert all source files to use this new API * Convert from bio_alloc to bio_kmalloc * In io engine we make use of the now fixed osd_req_decode_sense There are no functional changes or on disk additions after this patch. Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
2009-11-08 20:54:08 +08:00
if (unlikely(!or)) {
EXOFS_ERR("%s: osd_start_request failed\n", __func__);
ret = -ENOMEM;
goto out;
}
ios->per_dev[i].or = or;
ios->numdevs++;
osd_req_remove_object(or, &ios->obj);
}
ret = exofs_io_execute(ios);
out:
return ret;
}
exofs: RAID0 support We now support striping over mirror devices. Including variable sized stripe_unit. Some limits: * stripe_unit must be a multiple of PAGE_SIZE * stripe_unit * stripe_count is maximum upto 32-bit (4Gb) Tested RAID0 over mirrors, RAID0 only, mirrors only. All check. Design notes: * I'm not using a vectored raid-engine mechanism yet. Following the pnfs-objects-layout data-map structure, "Mirror" is just a private case of "group_width" == 1, and RAID0 is a private case of "Mirrors" == 1. The performance lose of the general case over the particular special case optimization is totally negligible, also considering the extra code size. * In general I added a prepare_stripes() stage that divides the to-be-io pages to the participating devices, the previous exofs_ios_write/read, now becomes _write/read_mirrors and a new write/read upper layer loops on all devices calling _write/read_mirrors. Effectively the prepare_stripes stage is the all secret. Also truncate need fixing to accommodate for striping. * In a RAID0 arrangement, in a regular usage scenario, if all inode layouts will start at the same device, the small files fill up the first device and the later devices stay empty, the farther the device the emptier it is. To fix that, each inode will start at a different stripe_unit, according to it's obj_id modulus number-of-stripe-units. And will then span all stripe-units in the same incrementing order wrapping back to the beginning of the device table. We call it a stripe-units moving window. Special consideration was taken to keep all devices in a mirror arrangement identical. So a broken osd-device could just be cloned from one of the mirrors and no FS scrubbing is needed. (We do that by rotating stripe-unit at a time and not a single device at a time.) TODO: We no longer verify object_length == inode->i_size in exofs_iget. (since i_size is stripped on multiple objects now). I should introduce a multiple-device attribute reading, and use it in exofs_iget. Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
2010-02-01 19:35:51 +08:00
static int _sbi_write_mirror(struct exofs_io_state *ios, int cur_comp)
exofs: Move all operations to an io_engine In anticipation for multi-device operations, we separate osd operations into an abstract I/O API. Currently only one device is used but later when adding more devices, we will drive all devices in parallel according to a "data_map" that describes how data is arranged on multiple devices. The file system level operates, like before, as if there is one object (inode-number) and an i_size. The io engine will split this to the same object-number but on multiple device. At first we introduce Mirror (raid 1) layout. But at the final outcome we intend to fully implement the pNFS-Objects data-map, including raid 0,4,5,6 over mirrored devices, over multiple device-groups. And more. See: http://tools.ietf.org/html/draft-ietf-nfsv4-pnfs-obj-12 * Define an io_state based API for accessing osd storage devices in an abstract way. Usage: First a caller allocates an io state with: exofs_get_io_state(struct exofs_sb_info *sbi, struct exofs_io_state** ios); Then calles one of: exofs_sbi_create(struct exofs_io_state *ios); exofs_sbi_remove(struct exofs_io_state *ios); exofs_sbi_write(struct exofs_io_state *ios); exofs_sbi_read(struct exofs_io_state *ios); exofs_oi_truncate(struct exofs_i_info *oi, u64 new_len); And when done exofs_put_io_state(struct exofs_io_state *ios); * Convert all source files to use this new API * Convert from bio_alloc to bio_kmalloc * In io engine we make use of the now fixed osd_req_decode_sense There are no functional changes or on disk additions after this patch. Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
2009-11-08 20:54:08 +08:00
{
exofs: RAID0 support We now support striping over mirror devices. Including variable sized stripe_unit. Some limits: * stripe_unit must be a multiple of PAGE_SIZE * stripe_unit * stripe_count is maximum upto 32-bit (4Gb) Tested RAID0 over mirrors, RAID0 only, mirrors only. All check. Design notes: * I'm not using a vectored raid-engine mechanism yet. Following the pnfs-objects-layout data-map structure, "Mirror" is just a private case of "group_width" == 1, and RAID0 is a private case of "Mirrors" == 1. The performance lose of the general case over the particular special case optimization is totally negligible, also considering the extra code size. * In general I added a prepare_stripes() stage that divides the to-be-io pages to the participating devices, the previous exofs_ios_write/read, now becomes _write/read_mirrors and a new write/read upper layer loops on all devices calling _write/read_mirrors. Effectively the prepare_stripes stage is the all secret. Also truncate need fixing to accommodate for striping. * In a RAID0 arrangement, in a regular usage scenario, if all inode layouts will start at the same device, the small files fill up the first device and the later devices stay empty, the farther the device the emptier it is. To fix that, each inode will start at a different stripe_unit, according to it's obj_id modulus number-of-stripe-units. And will then span all stripe-units in the same incrementing order wrapping back to the beginning of the device table. We call it a stripe-units moving window. Special consideration was taken to keep all devices in a mirror arrangement identical. So a broken osd-device could just be cloned from one of the mirrors and no FS scrubbing is needed. (We do that by rotating stripe-unit at a time and not a single device at a time.) TODO: We no longer verify object_length == inode->i_size in exofs_iget. (since i_size is stripped on multiple objects now). I should introduce a multiple-device attribute reading, and use it in exofs_iget. Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
2010-02-01 19:35:51 +08:00
struct exofs_per_dev_state *master_dev = &ios->per_dev[cur_comp];
unsigned dev = ios->per_dev[cur_comp].dev;
unsigned last_comp = cur_comp + ios->layout->mirrors_p1;
int ret = 0;
exofs: Move all operations to an io_engine In anticipation for multi-device operations, we separate osd operations into an abstract I/O API. Currently only one device is used but later when adding more devices, we will drive all devices in parallel according to a "data_map" that describes how data is arranged on multiple devices. The file system level operates, like before, as if there is one object (inode-number) and an i_size. The io engine will split this to the same object-number but on multiple device. At first we introduce Mirror (raid 1) layout. But at the final outcome we intend to fully implement the pNFS-Objects data-map, including raid 0,4,5,6 over mirrored devices, over multiple device-groups. And more. See: http://tools.ietf.org/html/draft-ietf-nfsv4-pnfs-obj-12 * Define an io_state based API for accessing osd storage devices in an abstract way. Usage: First a caller allocates an io state with: exofs_get_io_state(struct exofs_sb_info *sbi, struct exofs_io_state** ios); Then calles one of: exofs_sbi_create(struct exofs_io_state *ios); exofs_sbi_remove(struct exofs_io_state *ios); exofs_sbi_write(struct exofs_io_state *ios); exofs_sbi_read(struct exofs_io_state *ios); exofs_oi_truncate(struct exofs_i_info *oi, u64 new_len); And when done exofs_put_io_state(struct exofs_io_state *ios); * Convert all source files to use this new API * Convert from bio_alloc to bio_kmalloc * In io engine we make use of the now fixed osd_req_decode_sense There are no functional changes or on disk additions after this patch. Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
2009-11-08 20:54:08 +08:00
if (ios->pages && !master_dev->length)
return 0; /* Just an empty slot */
exofs: RAID0 support We now support striping over mirror devices. Including variable sized stripe_unit. Some limits: * stripe_unit must be a multiple of PAGE_SIZE * stripe_unit * stripe_count is maximum upto 32-bit (4Gb) Tested RAID0 over mirrors, RAID0 only, mirrors only. All check. Design notes: * I'm not using a vectored raid-engine mechanism yet. Following the pnfs-objects-layout data-map structure, "Mirror" is just a private case of "group_width" == 1, and RAID0 is a private case of "Mirrors" == 1. The performance lose of the general case over the particular special case optimization is totally negligible, also considering the extra code size. * In general I added a prepare_stripes() stage that divides the to-be-io pages to the participating devices, the previous exofs_ios_write/read, now becomes _write/read_mirrors and a new write/read upper layer loops on all devices calling _write/read_mirrors. Effectively the prepare_stripes stage is the all secret. Also truncate need fixing to accommodate for striping. * In a RAID0 arrangement, in a regular usage scenario, if all inode layouts will start at the same device, the small files fill up the first device and the later devices stay empty, the farther the device the emptier it is. To fix that, each inode will start at a different stripe_unit, according to it's obj_id modulus number-of-stripe-units. And will then span all stripe-units in the same incrementing order wrapping back to the beginning of the device table. We call it a stripe-units moving window. Special consideration was taken to keep all devices in a mirror arrangement identical. So a broken osd-device could just be cloned from one of the mirrors and no FS scrubbing is needed. (We do that by rotating stripe-unit at a time and not a single device at a time.) TODO: We no longer verify object_length == inode->i_size in exofs_iget. (since i_size is stripped on multiple objects now). I should introduce a multiple-device attribute reading, and use it in exofs_iget. Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
2010-02-01 19:35:51 +08:00
for (; cur_comp < last_comp; ++cur_comp, ++dev) {
struct exofs_per_dev_state *per_dev = &ios->per_dev[cur_comp];
exofs: Move all operations to an io_engine In anticipation for multi-device operations, we separate osd operations into an abstract I/O API. Currently only one device is used but later when adding more devices, we will drive all devices in parallel according to a "data_map" that describes how data is arranged on multiple devices. The file system level operates, like before, as if there is one object (inode-number) and an i_size. The io engine will split this to the same object-number but on multiple device. At first we introduce Mirror (raid 1) layout. But at the final outcome we intend to fully implement the pNFS-Objects data-map, including raid 0,4,5,6 over mirrored devices, over multiple device-groups. And more. See: http://tools.ietf.org/html/draft-ietf-nfsv4-pnfs-obj-12 * Define an io_state based API for accessing osd storage devices in an abstract way. Usage: First a caller allocates an io state with: exofs_get_io_state(struct exofs_sb_info *sbi, struct exofs_io_state** ios); Then calles one of: exofs_sbi_create(struct exofs_io_state *ios); exofs_sbi_remove(struct exofs_io_state *ios); exofs_sbi_write(struct exofs_io_state *ios); exofs_sbi_read(struct exofs_io_state *ios); exofs_oi_truncate(struct exofs_i_info *oi, u64 new_len); And when done exofs_put_io_state(struct exofs_io_state *ios); * Convert all source files to use this new API * Convert from bio_alloc to bio_kmalloc * In io engine we make use of the now fixed osd_req_decode_sense There are no functional changes or on disk additions after this patch. Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
2009-11-08 20:54:08 +08:00
struct osd_request *or;
exofs: RAID0 support We now support striping over mirror devices. Including variable sized stripe_unit. Some limits: * stripe_unit must be a multiple of PAGE_SIZE * stripe_unit * stripe_count is maximum upto 32-bit (4Gb) Tested RAID0 over mirrors, RAID0 only, mirrors only. All check. Design notes: * I'm not using a vectored raid-engine mechanism yet. Following the pnfs-objects-layout data-map structure, "Mirror" is just a private case of "group_width" == 1, and RAID0 is a private case of "Mirrors" == 1. The performance lose of the general case over the particular special case optimization is totally negligible, also considering the extra code size. * In general I added a prepare_stripes() stage that divides the to-be-io pages to the participating devices, the previous exofs_ios_write/read, now becomes _write/read_mirrors and a new write/read upper layer loops on all devices calling _write/read_mirrors. Effectively the prepare_stripes stage is the all secret. Also truncate need fixing to accommodate for striping. * In a RAID0 arrangement, in a regular usage scenario, if all inode layouts will start at the same device, the small files fill up the first device and the later devices stay empty, the farther the device the emptier it is. To fix that, each inode will start at a different stripe_unit, according to it's obj_id modulus number-of-stripe-units. And will then span all stripe-units in the same incrementing order wrapping back to the beginning of the device table. We call it a stripe-units moving window. Special consideration was taken to keep all devices in a mirror arrangement identical. So a broken osd-device could just be cloned from one of the mirrors and no FS scrubbing is needed. (We do that by rotating stripe-unit at a time and not a single device at a time.) TODO: We no longer verify object_length == inode->i_size in exofs_iget. (since i_size is stripped on multiple objects now). I should introduce a multiple-device attribute reading, and use it in exofs_iget. Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
2010-02-01 19:35:51 +08:00
or = osd_start_request(exofs_ios_od(ios, dev), GFP_KERNEL);
exofs: Move all operations to an io_engine In anticipation for multi-device operations, we separate osd operations into an abstract I/O API. Currently only one device is used but later when adding more devices, we will drive all devices in parallel according to a "data_map" that describes how data is arranged on multiple devices. The file system level operates, like before, as if there is one object (inode-number) and an i_size. The io engine will split this to the same object-number but on multiple device. At first we introduce Mirror (raid 1) layout. But at the final outcome we intend to fully implement the pNFS-Objects data-map, including raid 0,4,5,6 over mirrored devices, over multiple device-groups. And more. See: http://tools.ietf.org/html/draft-ietf-nfsv4-pnfs-obj-12 * Define an io_state based API for accessing osd storage devices in an abstract way. Usage: First a caller allocates an io state with: exofs_get_io_state(struct exofs_sb_info *sbi, struct exofs_io_state** ios); Then calles one of: exofs_sbi_create(struct exofs_io_state *ios); exofs_sbi_remove(struct exofs_io_state *ios); exofs_sbi_write(struct exofs_io_state *ios); exofs_sbi_read(struct exofs_io_state *ios); exofs_oi_truncate(struct exofs_i_info *oi, u64 new_len); And when done exofs_put_io_state(struct exofs_io_state *ios); * Convert all source files to use this new API * Convert from bio_alloc to bio_kmalloc * In io engine we make use of the now fixed osd_req_decode_sense There are no functional changes or on disk additions after this patch. Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
2009-11-08 20:54:08 +08:00
if (unlikely(!or)) {
EXOFS_ERR("%s: osd_start_request failed\n", __func__);
ret = -ENOMEM;
goto out;
}
exofs: RAID0 support We now support striping over mirror devices. Including variable sized stripe_unit. Some limits: * stripe_unit must be a multiple of PAGE_SIZE * stripe_unit * stripe_count is maximum upto 32-bit (4Gb) Tested RAID0 over mirrors, RAID0 only, mirrors only. All check. Design notes: * I'm not using a vectored raid-engine mechanism yet. Following the pnfs-objects-layout data-map structure, "Mirror" is just a private case of "group_width" == 1, and RAID0 is a private case of "Mirrors" == 1. The performance lose of the general case over the particular special case optimization is totally negligible, also considering the extra code size. * In general I added a prepare_stripes() stage that divides the to-be-io pages to the participating devices, the previous exofs_ios_write/read, now becomes _write/read_mirrors and a new write/read upper layer loops on all devices calling _write/read_mirrors. Effectively the prepare_stripes stage is the all secret. Also truncate need fixing to accommodate for striping. * In a RAID0 arrangement, in a regular usage scenario, if all inode layouts will start at the same device, the small files fill up the first device and the later devices stay empty, the farther the device the emptier it is. To fix that, each inode will start at a different stripe_unit, according to it's obj_id modulus number-of-stripe-units. And will then span all stripe-units in the same incrementing order wrapping back to the beginning of the device table. We call it a stripe-units moving window. Special consideration was taken to keep all devices in a mirror arrangement identical. So a broken osd-device could just be cloned from one of the mirrors and no FS scrubbing is needed. (We do that by rotating stripe-unit at a time and not a single device at a time.) TODO: We no longer verify object_length == inode->i_size in exofs_iget. (since i_size is stripped on multiple objects now). I should introduce a multiple-device attribute reading, and use it in exofs_iget. Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
2010-02-01 19:35:51 +08:00
per_dev->or = or;
per_dev->offset = master_dev->offset;
exofs: Move all operations to an io_engine In anticipation for multi-device operations, we separate osd operations into an abstract I/O API. Currently only one device is used but later when adding more devices, we will drive all devices in parallel according to a "data_map" that describes how data is arranged on multiple devices. The file system level operates, like before, as if there is one object (inode-number) and an i_size. The io engine will split this to the same object-number but on multiple device. At first we introduce Mirror (raid 1) layout. But at the final outcome we intend to fully implement the pNFS-Objects data-map, including raid 0,4,5,6 over mirrored devices, over multiple device-groups. And more. See: http://tools.ietf.org/html/draft-ietf-nfsv4-pnfs-obj-12 * Define an io_state based API for accessing osd storage devices in an abstract way. Usage: First a caller allocates an io state with: exofs_get_io_state(struct exofs_sb_info *sbi, struct exofs_io_state** ios); Then calles one of: exofs_sbi_create(struct exofs_io_state *ios); exofs_sbi_remove(struct exofs_io_state *ios); exofs_sbi_write(struct exofs_io_state *ios); exofs_sbi_read(struct exofs_io_state *ios); exofs_oi_truncate(struct exofs_i_info *oi, u64 new_len); And when done exofs_put_io_state(struct exofs_io_state *ios); * Convert all source files to use this new API * Convert from bio_alloc to bio_kmalloc * In io engine we make use of the now fixed osd_req_decode_sense There are no functional changes or on disk additions after this patch. Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
2009-11-08 20:54:08 +08:00
if (ios->pages) {
exofs: Move all operations to an io_engine In anticipation for multi-device operations, we separate osd operations into an abstract I/O API. Currently only one device is used but later when adding more devices, we will drive all devices in parallel according to a "data_map" that describes how data is arranged on multiple devices. The file system level operates, like before, as if there is one object (inode-number) and an i_size. The io engine will split this to the same object-number but on multiple device. At first we introduce Mirror (raid 1) layout. But at the final outcome we intend to fully implement the pNFS-Objects data-map, including raid 0,4,5,6 over mirrored devices, over multiple device-groups. And more. See: http://tools.ietf.org/html/draft-ietf-nfsv4-pnfs-obj-12 * Define an io_state based API for accessing osd storage devices in an abstract way. Usage: First a caller allocates an io state with: exofs_get_io_state(struct exofs_sb_info *sbi, struct exofs_io_state** ios); Then calles one of: exofs_sbi_create(struct exofs_io_state *ios); exofs_sbi_remove(struct exofs_io_state *ios); exofs_sbi_write(struct exofs_io_state *ios); exofs_sbi_read(struct exofs_io_state *ios); exofs_oi_truncate(struct exofs_i_info *oi, u64 new_len); And when done exofs_put_io_state(struct exofs_io_state *ios); * Convert all source files to use this new API * Convert from bio_alloc to bio_kmalloc * In io engine we make use of the now fixed osd_req_decode_sense There are no functional changes or on disk additions after this patch. Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
2009-11-08 20:54:08 +08:00
struct bio *bio;
exofs: RAID0 support We now support striping over mirror devices. Including variable sized stripe_unit. Some limits: * stripe_unit must be a multiple of PAGE_SIZE * stripe_unit * stripe_count is maximum upto 32-bit (4Gb) Tested RAID0 over mirrors, RAID0 only, mirrors only. All check. Design notes: * I'm not using a vectored raid-engine mechanism yet. Following the pnfs-objects-layout data-map structure, "Mirror" is just a private case of "group_width" == 1, and RAID0 is a private case of "Mirrors" == 1. The performance lose of the general case over the particular special case optimization is totally negligible, also considering the extra code size. * In general I added a prepare_stripes() stage that divides the to-be-io pages to the participating devices, the previous exofs_ios_write/read, now becomes _write/read_mirrors and a new write/read upper layer loops on all devices calling _write/read_mirrors. Effectively the prepare_stripes stage is the all secret. Also truncate need fixing to accommodate for striping. * In a RAID0 arrangement, in a regular usage scenario, if all inode layouts will start at the same device, the small files fill up the first device and the later devices stay empty, the farther the device the emptier it is. To fix that, each inode will start at a different stripe_unit, according to it's obj_id modulus number-of-stripe-units. And will then span all stripe-units in the same incrementing order wrapping back to the beginning of the device table. We call it a stripe-units moving window. Special consideration was taken to keep all devices in a mirror arrangement identical. So a broken osd-device could just be cloned from one of the mirrors and no FS scrubbing is needed. (We do that by rotating stripe-unit at a time and not a single device at a time.) TODO: We no longer verify object_length == inode->i_size in exofs_iget. (since i_size is stripped on multiple objects now). I should introduce a multiple-device attribute reading, and use it in exofs_iget. Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
2010-02-01 19:35:51 +08:00
if (per_dev != master_dev) {
exofs: Multi-device mirror support This patch changes on-disk format, it is accompanied with a parallel patch to mkfs.exofs that enables multi-device capabilities. After this patch, old exofs will refuse to mount a new formatted FS and new exofs will refuse an old format. This is done by moving the magic field offset inside the FSCB. A new FSCB *version* field was added. In the future, exofs will refuse to mount unmatched FSCB version. To up-grade or down-grade an exofs one must use mkfs.exofs --upgrade option before mounting. Introduced, a new object that contains a *device-table*. This object contains the default *data-map* and a linear array of devices information, which identifies the devices used in the filesystem. This object is only written to offline by mkfs.exofs. This is why it is kept separate from the FSCB, since the later is written to while mounted. Same partition number, same object number is used on all devices only the device varies. * define the new format, then load the device table on mount time make sure every thing is supported. * Change I/O engine to now support Mirror IO, .i.e write same data to multiple devices, read from a random device to spread the read-load from multiple clients (TODO: stripe read) Implementation notes: A few points introduced in previous patch should be mentioned here: * Special care was made so absolutlly all operation that have any chance of failing are done before any osd-request is executed. This is to minimize the need for a data consistency recovery, to only real IO errors. * Each IO state has a kref. It starts at 1, any osd-request executed will increment the kref, finally when all are executed the first ref is dropped. At IO-done, each request completion decrements the kref, the last one to return executes the internal _last_io() routine. _last_io() will call the registered io_state_done. On sync mode a caller does not supply a done method, indicating a synchronous request, the caller is put to sleep and a special io_state_done is registered that will awaken the caller. Though also in sync mode all operations are executed in parallel. Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
2009-11-16 22:03:05 +08:00
bio = bio_kmalloc(GFP_KERNEL,
exofs: RAID0 support We now support striping over mirror devices. Including variable sized stripe_unit. Some limits: * stripe_unit must be a multiple of PAGE_SIZE * stripe_unit * stripe_count is maximum upto 32-bit (4Gb) Tested RAID0 over mirrors, RAID0 only, mirrors only. All check. Design notes: * I'm not using a vectored raid-engine mechanism yet. Following the pnfs-objects-layout data-map structure, "Mirror" is just a private case of "group_width" == 1, and RAID0 is a private case of "Mirrors" == 1. The performance lose of the general case over the particular special case optimization is totally negligible, also considering the extra code size. * In general I added a prepare_stripes() stage that divides the to-be-io pages to the participating devices, the previous exofs_ios_write/read, now becomes _write/read_mirrors and a new write/read upper layer loops on all devices calling _write/read_mirrors. Effectively the prepare_stripes stage is the all secret. Also truncate need fixing to accommodate for striping. * In a RAID0 arrangement, in a regular usage scenario, if all inode layouts will start at the same device, the small files fill up the first device and the later devices stay empty, the farther the device the emptier it is. To fix that, each inode will start at a different stripe_unit, according to it's obj_id modulus number-of-stripe-units. And will then span all stripe-units in the same incrementing order wrapping back to the beginning of the device table. We call it a stripe-units moving window. Special consideration was taken to keep all devices in a mirror arrangement identical. So a broken osd-device could just be cloned from one of the mirrors and no FS scrubbing is needed. (We do that by rotating stripe-unit at a time and not a single device at a time.) TODO: We no longer verify object_length == inode->i_size in exofs_iget. (since i_size is stripped on multiple objects now). I should introduce a multiple-device attribute reading, and use it in exofs_iget. Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
2010-02-01 19:35:51 +08:00
master_dev->bio->bi_max_vecs);
exofs: Multi-device mirror support This patch changes on-disk format, it is accompanied with a parallel patch to mkfs.exofs that enables multi-device capabilities. After this patch, old exofs will refuse to mount a new formatted FS and new exofs will refuse an old format. This is done by moving the magic field offset inside the FSCB. A new FSCB *version* field was added. In the future, exofs will refuse to mount unmatched FSCB version. To up-grade or down-grade an exofs one must use mkfs.exofs --upgrade option before mounting. Introduced, a new object that contains a *device-table*. This object contains the default *data-map* and a linear array of devices information, which identifies the devices used in the filesystem. This object is only written to offline by mkfs.exofs. This is why it is kept separate from the FSCB, since the later is written to while mounted. Same partition number, same object number is used on all devices only the device varies. * define the new format, then load the device table on mount time make sure every thing is supported. * Change I/O engine to now support Mirror IO, .i.e write same data to multiple devices, read from a random device to spread the read-load from multiple clients (TODO: stripe read) Implementation notes: A few points introduced in previous patch should be mentioned here: * Special care was made so absolutlly all operation that have any chance of failing are done before any osd-request is executed. This is to minimize the need for a data consistency recovery, to only real IO errors. * Each IO state has a kref. It starts at 1, any osd-request executed will increment the kref, finally when all are executed the first ref is dropped. At IO-done, each request completion decrements the kref, the last one to return executes the internal _last_io() routine. _last_io() will call the registered io_state_done. On sync mode a caller does not supply a done method, indicating a synchronous request, the caller is put to sleep and a special io_state_done is registered that will awaken the caller. Though also in sync mode all operations are executed in parallel. Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
2009-11-16 22:03:05 +08:00
if (unlikely(!bio)) {
EXOFS_DBGMSG(
"Failed to allocate BIO size=%u\n",
exofs: RAID0 support We now support striping over mirror devices. Including variable sized stripe_unit. Some limits: * stripe_unit must be a multiple of PAGE_SIZE * stripe_unit * stripe_count is maximum upto 32-bit (4Gb) Tested RAID0 over mirrors, RAID0 only, mirrors only. All check. Design notes: * I'm not using a vectored raid-engine mechanism yet. Following the pnfs-objects-layout data-map structure, "Mirror" is just a private case of "group_width" == 1, and RAID0 is a private case of "Mirrors" == 1. The performance lose of the general case over the particular special case optimization is totally negligible, also considering the extra code size. * In general I added a prepare_stripes() stage that divides the to-be-io pages to the participating devices, the previous exofs_ios_write/read, now becomes _write/read_mirrors and a new write/read upper layer loops on all devices calling _write/read_mirrors. Effectively the prepare_stripes stage is the all secret. Also truncate need fixing to accommodate for striping. * In a RAID0 arrangement, in a regular usage scenario, if all inode layouts will start at the same device, the small files fill up the first device and the later devices stay empty, the farther the device the emptier it is. To fix that, each inode will start at a different stripe_unit, according to it's obj_id modulus number-of-stripe-units. And will then span all stripe-units in the same incrementing order wrapping back to the beginning of the device table. We call it a stripe-units moving window. Special consideration was taken to keep all devices in a mirror arrangement identical. So a broken osd-device could just be cloned from one of the mirrors and no FS scrubbing is needed. (We do that by rotating stripe-unit at a time and not a single device at a time.) TODO: We no longer verify object_length == inode->i_size in exofs_iget. (since i_size is stripped on multiple objects now). I should introduce a multiple-device attribute reading, and use it in exofs_iget. Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
2010-02-01 19:35:51 +08:00
master_dev->bio->bi_max_vecs);
exofs: Multi-device mirror support This patch changes on-disk format, it is accompanied with a parallel patch to mkfs.exofs that enables multi-device capabilities. After this patch, old exofs will refuse to mount a new formatted FS and new exofs will refuse an old format. This is done by moving the magic field offset inside the FSCB. A new FSCB *version* field was added. In the future, exofs will refuse to mount unmatched FSCB version. To up-grade or down-grade an exofs one must use mkfs.exofs --upgrade option before mounting. Introduced, a new object that contains a *device-table*. This object contains the default *data-map* and a linear array of devices information, which identifies the devices used in the filesystem. This object is only written to offline by mkfs.exofs. This is why it is kept separate from the FSCB, since the later is written to while mounted. Same partition number, same object number is used on all devices only the device varies. * define the new format, then load the device table on mount time make sure every thing is supported. * Change I/O engine to now support Mirror IO, .i.e write same data to multiple devices, read from a random device to spread the read-load from multiple clients (TODO: stripe read) Implementation notes: A few points introduced in previous patch should be mentioned here: * Special care was made so absolutlly all operation that have any chance of failing are done before any osd-request is executed. This is to minimize the need for a data consistency recovery, to only real IO errors. * Each IO state has a kref. It starts at 1, any osd-request executed will increment the kref, finally when all are executed the first ref is dropped. At IO-done, each request completion decrements the kref, the last one to return executes the internal _last_io() routine. _last_io() will call the registered io_state_done. On sync mode a caller does not supply a done method, indicating a synchronous request, the caller is put to sleep and a special io_state_done is registered that will awaken the caller. Though also in sync mode all operations are executed in parallel. Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
2009-11-16 22:03:05 +08:00
ret = -ENOMEM;
goto out;
}
exofs: RAID0 support We now support striping over mirror devices. Including variable sized stripe_unit. Some limits: * stripe_unit must be a multiple of PAGE_SIZE * stripe_unit * stripe_count is maximum upto 32-bit (4Gb) Tested RAID0 over mirrors, RAID0 only, mirrors only. All check. Design notes: * I'm not using a vectored raid-engine mechanism yet. Following the pnfs-objects-layout data-map structure, "Mirror" is just a private case of "group_width" == 1, and RAID0 is a private case of "Mirrors" == 1. The performance lose of the general case over the particular special case optimization is totally negligible, also considering the extra code size. * In general I added a prepare_stripes() stage that divides the to-be-io pages to the participating devices, the previous exofs_ios_write/read, now becomes _write/read_mirrors and a new write/read upper layer loops on all devices calling _write/read_mirrors. Effectively the prepare_stripes stage is the all secret. Also truncate need fixing to accommodate for striping. * In a RAID0 arrangement, in a regular usage scenario, if all inode layouts will start at the same device, the small files fill up the first device and the later devices stay empty, the farther the device the emptier it is. To fix that, each inode will start at a different stripe_unit, according to it's obj_id modulus number-of-stripe-units. And will then span all stripe-units in the same incrementing order wrapping back to the beginning of the device table. We call it a stripe-units moving window. Special consideration was taken to keep all devices in a mirror arrangement identical. So a broken osd-device could just be cloned from one of the mirrors and no FS scrubbing is needed. (We do that by rotating stripe-unit at a time and not a single device at a time.) TODO: We no longer verify object_length == inode->i_size in exofs_iget. (since i_size is stripped on multiple objects now). I should introduce a multiple-device attribute reading, and use it in exofs_iget. Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
2010-02-01 19:35:51 +08:00
__bio_clone(bio, master_dev->bio);
exofs: Multi-device mirror support This patch changes on-disk format, it is accompanied with a parallel patch to mkfs.exofs that enables multi-device capabilities. After this patch, old exofs will refuse to mount a new formatted FS and new exofs will refuse an old format. This is done by moving the magic field offset inside the FSCB. A new FSCB *version* field was added. In the future, exofs will refuse to mount unmatched FSCB version. To up-grade or down-grade an exofs one must use mkfs.exofs --upgrade option before mounting. Introduced, a new object that contains a *device-table*. This object contains the default *data-map* and a linear array of devices information, which identifies the devices used in the filesystem. This object is only written to offline by mkfs.exofs. This is why it is kept separate from the FSCB, since the later is written to while mounted. Same partition number, same object number is used on all devices only the device varies. * define the new format, then load the device table on mount time make sure every thing is supported. * Change I/O engine to now support Mirror IO, .i.e write same data to multiple devices, read from a random device to spread the read-load from multiple clients (TODO: stripe read) Implementation notes: A few points introduced in previous patch should be mentioned here: * Special care was made so absolutlly all operation that have any chance of failing are done before any osd-request is executed. This is to minimize the need for a data consistency recovery, to only real IO errors. * Each IO state has a kref. It starts at 1, any osd-request executed will increment the kref, finally when all are executed the first ref is dropped. At IO-done, each request completion decrements the kref, the last one to return executes the internal _last_io() routine. _last_io() will call the registered io_state_done. On sync mode a caller does not supply a done method, indicating a synchronous request, the caller is put to sleep and a special io_state_done is registered that will awaken the caller. Though also in sync mode all operations are executed in parallel. Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
2009-11-16 22:03:05 +08:00
bio->bi_bdev = NULL;
bio->bi_next = NULL;
exofs: RAID0 support We now support striping over mirror devices. Including variable sized stripe_unit. Some limits: * stripe_unit must be a multiple of PAGE_SIZE * stripe_unit * stripe_count is maximum upto 32-bit (4Gb) Tested RAID0 over mirrors, RAID0 only, mirrors only. All check. Design notes: * I'm not using a vectored raid-engine mechanism yet. Following the pnfs-objects-layout data-map structure, "Mirror" is just a private case of "group_width" == 1, and RAID0 is a private case of "Mirrors" == 1. The performance lose of the general case over the particular special case optimization is totally negligible, also considering the extra code size. * In general I added a prepare_stripes() stage that divides the to-be-io pages to the participating devices, the previous exofs_ios_write/read, now becomes _write/read_mirrors and a new write/read upper layer loops on all devices calling _write/read_mirrors. Effectively the prepare_stripes stage is the all secret. Also truncate need fixing to accommodate for striping. * In a RAID0 arrangement, in a regular usage scenario, if all inode layouts will start at the same device, the small files fill up the first device and the later devices stay empty, the farther the device the emptier it is. To fix that, each inode will start at a different stripe_unit, according to it's obj_id modulus number-of-stripe-units. And will then span all stripe-units in the same incrementing order wrapping back to the beginning of the device table. We call it a stripe-units moving window. Special consideration was taken to keep all devices in a mirror arrangement identical. So a broken osd-device could just be cloned from one of the mirrors and no FS scrubbing is needed. (We do that by rotating stripe-unit at a time and not a single device at a time.) TODO: We no longer verify object_length == inode->i_size in exofs_iget. (since i_size is stripped on multiple objects now). I should introduce a multiple-device attribute reading, and use it in exofs_iget. Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
2010-02-01 19:35:51 +08:00
per_dev->length = master_dev->length;
per_dev->bio = bio;
per_dev->dev = dev;
exofs: Multi-device mirror support This patch changes on-disk format, it is accompanied with a parallel patch to mkfs.exofs that enables multi-device capabilities. After this patch, old exofs will refuse to mount a new formatted FS and new exofs will refuse an old format. This is done by moving the magic field offset inside the FSCB. A new FSCB *version* field was added. In the future, exofs will refuse to mount unmatched FSCB version. To up-grade or down-grade an exofs one must use mkfs.exofs --upgrade option before mounting. Introduced, a new object that contains a *device-table*. This object contains the default *data-map* and a linear array of devices information, which identifies the devices used in the filesystem. This object is only written to offline by mkfs.exofs. This is why it is kept separate from the FSCB, since the later is written to while mounted. Same partition number, same object number is used on all devices only the device varies. * define the new format, then load the device table on mount time make sure every thing is supported. * Change I/O engine to now support Mirror IO, .i.e write same data to multiple devices, read from a random device to spread the read-load from multiple clients (TODO: stripe read) Implementation notes: A few points introduced in previous patch should be mentioned here: * Special care was made so absolutlly all operation that have any chance of failing are done before any osd-request is executed. This is to minimize the need for a data consistency recovery, to only real IO errors. * Each IO state has a kref. It starts at 1, any osd-request executed will increment the kref, finally when all are executed the first ref is dropped. At IO-done, each request completion decrements the kref, the last one to return executes the internal _last_io() routine. _last_io() will call the registered io_state_done. On sync mode a caller does not supply a done method, indicating a synchronous request, the caller is put to sleep and a special io_state_done is registered that will awaken the caller. Though also in sync mode all operations are executed in parallel. Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
2009-11-16 22:03:05 +08:00
} else {
exofs: RAID0 support We now support striping over mirror devices. Including variable sized stripe_unit. Some limits: * stripe_unit must be a multiple of PAGE_SIZE * stripe_unit * stripe_count is maximum upto 32-bit (4Gb) Tested RAID0 over mirrors, RAID0 only, mirrors only. All check. Design notes: * I'm not using a vectored raid-engine mechanism yet. Following the pnfs-objects-layout data-map structure, "Mirror" is just a private case of "group_width" == 1, and RAID0 is a private case of "Mirrors" == 1. The performance lose of the general case over the particular special case optimization is totally negligible, also considering the extra code size. * In general I added a prepare_stripes() stage that divides the to-be-io pages to the participating devices, the previous exofs_ios_write/read, now becomes _write/read_mirrors and a new write/read upper layer loops on all devices calling _write/read_mirrors. Effectively the prepare_stripes stage is the all secret. Also truncate need fixing to accommodate for striping. * In a RAID0 arrangement, in a regular usage scenario, if all inode layouts will start at the same device, the small files fill up the first device and the later devices stay empty, the farther the device the emptier it is. To fix that, each inode will start at a different stripe_unit, according to it's obj_id modulus number-of-stripe-units. And will then span all stripe-units in the same incrementing order wrapping back to the beginning of the device table. We call it a stripe-units moving window. Special consideration was taken to keep all devices in a mirror arrangement identical. So a broken osd-device could just be cloned from one of the mirrors and no FS scrubbing is needed. (We do that by rotating stripe-unit at a time and not a single device at a time.) TODO: We no longer verify object_length == inode->i_size in exofs_iget. (since i_size is stripped on multiple objects now). I should introduce a multiple-device attribute reading, and use it in exofs_iget. Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
2010-02-01 19:35:51 +08:00
bio = master_dev->bio;
/* FIXME: bio_set_dir() */
bio->bi_rw |= REQ_WRITE;
exofs: Multi-device mirror support This patch changes on-disk format, it is accompanied with a parallel patch to mkfs.exofs that enables multi-device capabilities. After this patch, old exofs will refuse to mount a new formatted FS and new exofs will refuse an old format. This is done by moving the magic field offset inside the FSCB. A new FSCB *version* field was added. In the future, exofs will refuse to mount unmatched FSCB version. To up-grade or down-grade an exofs one must use mkfs.exofs --upgrade option before mounting. Introduced, a new object that contains a *device-table*. This object contains the default *data-map* and a linear array of devices information, which identifies the devices used in the filesystem. This object is only written to offline by mkfs.exofs. This is why it is kept separate from the FSCB, since the later is written to while mounted. Same partition number, same object number is used on all devices only the device varies. * define the new format, then load the device table on mount time make sure every thing is supported. * Change I/O engine to now support Mirror IO, .i.e write same data to multiple devices, read from a random device to spread the read-load from multiple clients (TODO: stripe read) Implementation notes: A few points introduced in previous patch should be mentioned here: * Special care was made so absolutlly all operation that have any chance of failing are done before any osd-request is executed. This is to minimize the need for a data consistency recovery, to only real IO errors. * Each IO state has a kref. It starts at 1, any osd-request executed will increment the kref, finally when all are executed the first ref is dropped. At IO-done, each request completion decrements the kref, the last one to return executes the internal _last_io() routine. _last_io() will call the registered io_state_done. On sync mode a caller does not supply a done method, indicating a synchronous request, the caller is put to sleep and a special io_state_done is registered that will awaken the caller. Though also in sync mode all operations are executed in parallel. Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
2009-11-16 22:03:05 +08:00
}
exofs: Move all operations to an io_engine In anticipation for multi-device operations, we separate osd operations into an abstract I/O API. Currently only one device is used but later when adding more devices, we will drive all devices in parallel according to a "data_map" that describes how data is arranged on multiple devices. The file system level operates, like before, as if there is one object (inode-number) and an i_size. The io engine will split this to the same object-number but on multiple device. At first we introduce Mirror (raid 1) layout. But at the final outcome we intend to fully implement the pNFS-Objects data-map, including raid 0,4,5,6 over mirrored devices, over multiple device-groups. And more. See: http://tools.ietf.org/html/draft-ietf-nfsv4-pnfs-obj-12 * Define an io_state based API for accessing osd storage devices in an abstract way. Usage: First a caller allocates an io state with: exofs_get_io_state(struct exofs_sb_info *sbi, struct exofs_io_state** ios); Then calles one of: exofs_sbi_create(struct exofs_io_state *ios); exofs_sbi_remove(struct exofs_io_state *ios); exofs_sbi_write(struct exofs_io_state *ios); exofs_sbi_read(struct exofs_io_state *ios); exofs_oi_truncate(struct exofs_i_info *oi, u64 new_len); And when done exofs_put_io_state(struct exofs_io_state *ios); * Convert all source files to use this new API * Convert from bio_alloc to bio_kmalloc * In io engine we make use of the now fixed osd_req_decode_sense There are no functional changes or on disk additions after this patch. Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
2009-11-08 20:54:08 +08:00
exofs: RAID0 support We now support striping over mirror devices. Including variable sized stripe_unit. Some limits: * stripe_unit must be a multiple of PAGE_SIZE * stripe_unit * stripe_count is maximum upto 32-bit (4Gb) Tested RAID0 over mirrors, RAID0 only, mirrors only. All check. Design notes: * I'm not using a vectored raid-engine mechanism yet. Following the pnfs-objects-layout data-map structure, "Mirror" is just a private case of "group_width" == 1, and RAID0 is a private case of "Mirrors" == 1. The performance lose of the general case over the particular special case optimization is totally negligible, also considering the extra code size. * In general I added a prepare_stripes() stage that divides the to-be-io pages to the participating devices, the previous exofs_ios_write/read, now becomes _write/read_mirrors and a new write/read upper layer loops on all devices calling _write/read_mirrors. Effectively the prepare_stripes stage is the all secret. Also truncate need fixing to accommodate for striping. * In a RAID0 arrangement, in a regular usage scenario, if all inode layouts will start at the same device, the small files fill up the first device and the later devices stay empty, the farther the device the emptier it is. To fix that, each inode will start at a different stripe_unit, according to it's obj_id modulus number-of-stripe-units. And will then span all stripe-units in the same incrementing order wrapping back to the beginning of the device table. We call it a stripe-units moving window. Special consideration was taken to keep all devices in a mirror arrangement identical. So a broken osd-device could just be cloned from one of the mirrors and no FS scrubbing is needed. (We do that by rotating stripe-unit at a time and not a single device at a time.) TODO: We no longer verify object_length == inode->i_size in exofs_iget. (since i_size is stripped on multiple objects now). I should introduce a multiple-device attribute reading, and use it in exofs_iget. Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
2010-02-01 19:35:51 +08:00
osd_req_write(or, &ios->obj, per_dev->offset, bio,
per_dev->length);
EXOFS_DBGMSG("write(0x%llx) offset=0x%llx "
"length=0x%llx dev=%d\n",
exofs: RAID0 support We now support striping over mirror devices. Including variable sized stripe_unit. Some limits: * stripe_unit must be a multiple of PAGE_SIZE * stripe_unit * stripe_count is maximum upto 32-bit (4Gb) Tested RAID0 over mirrors, RAID0 only, mirrors only. All check. Design notes: * I'm not using a vectored raid-engine mechanism yet. Following the pnfs-objects-layout data-map structure, "Mirror" is just a private case of "group_width" == 1, and RAID0 is a private case of "Mirrors" == 1. The performance lose of the general case over the particular special case optimization is totally negligible, also considering the extra code size. * In general I added a prepare_stripes() stage that divides the to-be-io pages to the participating devices, the previous exofs_ios_write/read, now becomes _write/read_mirrors and a new write/read upper layer loops on all devices calling _write/read_mirrors. Effectively the prepare_stripes stage is the all secret. Also truncate need fixing to accommodate for striping. * In a RAID0 arrangement, in a regular usage scenario, if all inode layouts will start at the same device, the small files fill up the first device and the later devices stay empty, the farther the device the emptier it is. To fix that, each inode will start at a different stripe_unit, according to it's obj_id modulus number-of-stripe-units. And will then span all stripe-units in the same incrementing order wrapping back to the beginning of the device table. We call it a stripe-units moving window. Special consideration was taken to keep all devices in a mirror arrangement identical. So a broken osd-device could just be cloned from one of the mirrors and no FS scrubbing is needed. (We do that by rotating stripe-unit at a time and not a single device at a time.) TODO: We no longer verify object_length == inode->i_size in exofs_iget. (since i_size is stripped on multiple objects now). I should introduce a multiple-device attribute reading, and use it in exofs_iget. Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
2010-02-01 19:35:51 +08:00
_LLU(ios->obj.id), _LLU(per_dev->offset),
_LLU(per_dev->length), dev);
exofs: Move all operations to an io_engine In anticipation for multi-device operations, we separate osd operations into an abstract I/O API. Currently only one device is used but later when adding more devices, we will drive all devices in parallel according to a "data_map" that describes how data is arranged on multiple devices. The file system level operates, like before, as if there is one object (inode-number) and an i_size. The io engine will split this to the same object-number but on multiple device. At first we introduce Mirror (raid 1) layout. But at the final outcome we intend to fully implement the pNFS-Objects data-map, including raid 0,4,5,6 over mirrored devices, over multiple device-groups. And more. See: http://tools.ietf.org/html/draft-ietf-nfsv4-pnfs-obj-12 * Define an io_state based API for accessing osd storage devices in an abstract way. Usage: First a caller allocates an io state with: exofs_get_io_state(struct exofs_sb_info *sbi, struct exofs_io_state** ios); Then calles one of: exofs_sbi_create(struct exofs_io_state *ios); exofs_sbi_remove(struct exofs_io_state *ios); exofs_sbi_write(struct exofs_io_state *ios); exofs_sbi_read(struct exofs_io_state *ios); exofs_oi_truncate(struct exofs_i_info *oi, u64 new_len); And when done exofs_put_io_state(struct exofs_io_state *ios); * Convert all source files to use this new API * Convert from bio_alloc to bio_kmalloc * In io engine we make use of the now fixed osd_req_decode_sense There are no functional changes or on disk additions after this patch. Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
2009-11-08 20:54:08 +08:00
} else if (ios->kern_buff) {
exofs: RAID0 support We now support striping over mirror devices. Including variable sized stripe_unit. Some limits: * stripe_unit must be a multiple of PAGE_SIZE * stripe_unit * stripe_count is maximum upto 32-bit (4Gb) Tested RAID0 over mirrors, RAID0 only, mirrors only. All check. Design notes: * I'm not using a vectored raid-engine mechanism yet. Following the pnfs-objects-layout data-map structure, "Mirror" is just a private case of "group_width" == 1, and RAID0 is a private case of "Mirrors" == 1. The performance lose of the general case over the particular special case optimization is totally negligible, also considering the extra code size. * In general I added a prepare_stripes() stage that divides the to-be-io pages to the participating devices, the previous exofs_ios_write/read, now becomes _write/read_mirrors and a new write/read upper layer loops on all devices calling _write/read_mirrors. Effectively the prepare_stripes stage is the all secret. Also truncate need fixing to accommodate for striping. * In a RAID0 arrangement, in a regular usage scenario, if all inode layouts will start at the same device, the small files fill up the first device and the later devices stay empty, the farther the device the emptier it is. To fix that, each inode will start at a different stripe_unit, according to it's obj_id modulus number-of-stripe-units. And will then span all stripe-units in the same incrementing order wrapping back to the beginning of the device table. We call it a stripe-units moving window. Special consideration was taken to keep all devices in a mirror arrangement identical. So a broken osd-device could just be cloned from one of the mirrors and no FS scrubbing is needed. (We do that by rotating stripe-unit at a time and not a single device at a time.) TODO: We no longer verify object_length == inode->i_size in exofs_iget. (since i_size is stripped on multiple objects now). I should introduce a multiple-device attribute reading, and use it in exofs_iget. Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
2010-02-01 19:35:51 +08:00
ret = osd_req_write_kern(or, &ios->obj, per_dev->offset,
exofs: Move all operations to an io_engine In anticipation for multi-device operations, we separate osd operations into an abstract I/O API. Currently only one device is used but later when adding more devices, we will drive all devices in parallel according to a "data_map" that describes how data is arranged on multiple devices. The file system level operates, like before, as if there is one object (inode-number) and an i_size. The io engine will split this to the same object-number but on multiple device. At first we introduce Mirror (raid 1) layout. But at the final outcome we intend to fully implement the pNFS-Objects data-map, including raid 0,4,5,6 over mirrored devices, over multiple device-groups. And more. See: http://tools.ietf.org/html/draft-ietf-nfsv4-pnfs-obj-12 * Define an io_state based API for accessing osd storage devices in an abstract way. Usage: First a caller allocates an io state with: exofs_get_io_state(struct exofs_sb_info *sbi, struct exofs_io_state** ios); Then calles one of: exofs_sbi_create(struct exofs_io_state *ios); exofs_sbi_remove(struct exofs_io_state *ios); exofs_sbi_write(struct exofs_io_state *ios); exofs_sbi_read(struct exofs_io_state *ios); exofs_oi_truncate(struct exofs_i_info *oi, u64 new_len); And when done exofs_put_io_state(struct exofs_io_state *ios); * Convert all source files to use this new API * Convert from bio_alloc to bio_kmalloc * In io engine we make use of the now fixed osd_req_decode_sense There are no functional changes or on disk additions after this patch. Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
2009-11-08 20:54:08 +08:00
ios->kern_buff, ios->length);
exofs: RAID0 support We now support striping over mirror devices. Including variable sized stripe_unit. Some limits: * stripe_unit must be a multiple of PAGE_SIZE * stripe_unit * stripe_count is maximum upto 32-bit (4Gb) Tested RAID0 over mirrors, RAID0 only, mirrors only. All check. Design notes: * I'm not using a vectored raid-engine mechanism yet. Following the pnfs-objects-layout data-map structure, "Mirror" is just a private case of "group_width" == 1, and RAID0 is a private case of "Mirrors" == 1. The performance lose of the general case over the particular special case optimization is totally negligible, also considering the extra code size. * In general I added a prepare_stripes() stage that divides the to-be-io pages to the participating devices, the previous exofs_ios_write/read, now becomes _write/read_mirrors and a new write/read upper layer loops on all devices calling _write/read_mirrors. Effectively the prepare_stripes stage is the all secret. Also truncate need fixing to accommodate for striping. * In a RAID0 arrangement, in a regular usage scenario, if all inode layouts will start at the same device, the small files fill up the first device and the later devices stay empty, the farther the device the emptier it is. To fix that, each inode will start at a different stripe_unit, according to it's obj_id modulus number-of-stripe-units. And will then span all stripe-units in the same incrementing order wrapping back to the beginning of the device table. We call it a stripe-units moving window. Special consideration was taken to keep all devices in a mirror arrangement identical. So a broken osd-device could just be cloned from one of the mirrors and no FS scrubbing is needed. (We do that by rotating stripe-unit at a time and not a single device at a time.) TODO: We no longer verify object_length == inode->i_size in exofs_iget. (since i_size is stripped on multiple objects now). I should introduce a multiple-device attribute reading, and use it in exofs_iget. Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
2010-02-01 19:35:51 +08:00
if (unlikely(ret))
goto out;
EXOFS_DBGMSG2("write_kern(0x%llx) offset=0x%llx "
"length=0x%llx dev=%d\n",
exofs: RAID0 support We now support striping over mirror devices. Including variable sized stripe_unit. Some limits: * stripe_unit must be a multiple of PAGE_SIZE * stripe_unit * stripe_count is maximum upto 32-bit (4Gb) Tested RAID0 over mirrors, RAID0 only, mirrors only. All check. Design notes: * I'm not using a vectored raid-engine mechanism yet. Following the pnfs-objects-layout data-map structure, "Mirror" is just a private case of "group_width" == 1, and RAID0 is a private case of "Mirrors" == 1. The performance lose of the general case over the particular special case optimization is totally negligible, also considering the extra code size. * In general I added a prepare_stripes() stage that divides the to-be-io pages to the participating devices, the previous exofs_ios_write/read, now becomes _write/read_mirrors and a new write/read upper layer loops on all devices calling _write/read_mirrors. Effectively the prepare_stripes stage is the all secret. Also truncate need fixing to accommodate for striping. * In a RAID0 arrangement, in a regular usage scenario, if all inode layouts will start at the same device, the small files fill up the first device and the later devices stay empty, the farther the device the emptier it is. To fix that, each inode will start at a different stripe_unit, according to it's obj_id modulus number-of-stripe-units. And will then span all stripe-units in the same incrementing order wrapping back to the beginning of the device table. We call it a stripe-units moving window. Special consideration was taken to keep all devices in a mirror arrangement identical. So a broken osd-device could just be cloned from one of the mirrors and no FS scrubbing is needed. (We do that by rotating stripe-unit at a time and not a single device at a time.) TODO: We no longer verify object_length == inode->i_size in exofs_iget. (since i_size is stripped on multiple objects now). I should introduce a multiple-device attribute reading, and use it in exofs_iget. Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
2010-02-01 19:35:51 +08:00
_LLU(ios->obj.id), _LLU(per_dev->offset),
_LLU(ios->length), dev);
exofs: Move all operations to an io_engine In anticipation for multi-device operations, we separate osd operations into an abstract I/O API. Currently only one device is used but later when adding more devices, we will drive all devices in parallel according to a "data_map" that describes how data is arranged on multiple devices. The file system level operates, like before, as if there is one object (inode-number) and an i_size. The io engine will split this to the same object-number but on multiple device. At first we introduce Mirror (raid 1) layout. But at the final outcome we intend to fully implement the pNFS-Objects data-map, including raid 0,4,5,6 over mirrored devices, over multiple device-groups. And more. See: http://tools.ietf.org/html/draft-ietf-nfsv4-pnfs-obj-12 * Define an io_state based API for accessing osd storage devices in an abstract way. Usage: First a caller allocates an io state with: exofs_get_io_state(struct exofs_sb_info *sbi, struct exofs_io_state** ios); Then calles one of: exofs_sbi_create(struct exofs_io_state *ios); exofs_sbi_remove(struct exofs_io_state *ios); exofs_sbi_write(struct exofs_io_state *ios); exofs_sbi_read(struct exofs_io_state *ios); exofs_oi_truncate(struct exofs_i_info *oi, u64 new_len); And when done exofs_put_io_state(struct exofs_io_state *ios); * Convert all source files to use this new API * Convert from bio_alloc to bio_kmalloc * In io engine we make use of the now fixed osd_req_decode_sense There are no functional changes or on disk additions after this patch. Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
2009-11-08 20:54:08 +08:00
} else {
osd_req_set_attributes(or, &ios->obj);
EXOFS_DBGMSG2("obj(0x%llx) set_attributes=%d dev=%d\n",
exofs: RAID0 support We now support striping over mirror devices. Including variable sized stripe_unit. Some limits: * stripe_unit must be a multiple of PAGE_SIZE * stripe_unit * stripe_count is maximum upto 32-bit (4Gb) Tested RAID0 over mirrors, RAID0 only, mirrors only. All check. Design notes: * I'm not using a vectored raid-engine mechanism yet. Following the pnfs-objects-layout data-map structure, "Mirror" is just a private case of "group_width" == 1, and RAID0 is a private case of "Mirrors" == 1. The performance lose of the general case over the particular special case optimization is totally negligible, also considering the extra code size. * In general I added a prepare_stripes() stage that divides the to-be-io pages to the participating devices, the previous exofs_ios_write/read, now becomes _write/read_mirrors and a new write/read upper layer loops on all devices calling _write/read_mirrors. Effectively the prepare_stripes stage is the all secret. Also truncate need fixing to accommodate for striping. * In a RAID0 arrangement, in a regular usage scenario, if all inode layouts will start at the same device, the small files fill up the first device and the later devices stay empty, the farther the device the emptier it is. To fix that, each inode will start at a different stripe_unit, according to it's obj_id modulus number-of-stripe-units. And will then span all stripe-units in the same incrementing order wrapping back to the beginning of the device table. We call it a stripe-units moving window. Special consideration was taken to keep all devices in a mirror arrangement identical. So a broken osd-device could just be cloned from one of the mirrors and no FS scrubbing is needed. (We do that by rotating stripe-unit at a time and not a single device at a time.) TODO: We no longer verify object_length == inode->i_size in exofs_iget. (since i_size is stripped on multiple objects now). I should introduce a multiple-device attribute reading, and use it in exofs_iget. Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
2010-02-01 19:35:51 +08:00
_LLU(ios->obj.id), ios->out_attr_len, dev);
exofs: Move all operations to an io_engine In anticipation for multi-device operations, we separate osd operations into an abstract I/O API. Currently only one device is used but later when adding more devices, we will drive all devices in parallel according to a "data_map" that describes how data is arranged on multiple devices. The file system level operates, like before, as if there is one object (inode-number) and an i_size. The io engine will split this to the same object-number but on multiple device. At first we introduce Mirror (raid 1) layout. But at the final outcome we intend to fully implement the pNFS-Objects data-map, including raid 0,4,5,6 over mirrored devices, over multiple device-groups. And more. See: http://tools.ietf.org/html/draft-ietf-nfsv4-pnfs-obj-12 * Define an io_state based API for accessing osd storage devices in an abstract way. Usage: First a caller allocates an io state with: exofs_get_io_state(struct exofs_sb_info *sbi, struct exofs_io_state** ios); Then calles one of: exofs_sbi_create(struct exofs_io_state *ios); exofs_sbi_remove(struct exofs_io_state *ios); exofs_sbi_write(struct exofs_io_state *ios); exofs_sbi_read(struct exofs_io_state *ios); exofs_oi_truncate(struct exofs_i_info *oi, u64 new_len); And when done exofs_put_io_state(struct exofs_io_state *ios); * Convert all source files to use this new API * Convert from bio_alloc to bio_kmalloc * In io engine we make use of the now fixed osd_req_decode_sense There are no functional changes or on disk additions after this patch. Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
2009-11-08 20:54:08 +08:00
}
if (ios->out_attr)
osd_req_add_set_attr_list(or, ios->out_attr,
ios->out_attr_len);
if (ios->in_attr)
osd_req_add_get_attr_list(or, ios->in_attr,
ios->in_attr_len);
}
exofs: Move all operations to an io_engine In anticipation for multi-device operations, we separate osd operations into an abstract I/O API. Currently only one device is used but later when adding more devices, we will drive all devices in parallel according to a "data_map" that describes how data is arranged on multiple devices. The file system level operates, like before, as if there is one object (inode-number) and an i_size. The io engine will split this to the same object-number but on multiple device. At first we introduce Mirror (raid 1) layout. But at the final outcome we intend to fully implement the pNFS-Objects data-map, including raid 0,4,5,6 over mirrored devices, over multiple device-groups. And more. See: http://tools.ietf.org/html/draft-ietf-nfsv4-pnfs-obj-12 * Define an io_state based API for accessing osd storage devices in an abstract way. Usage: First a caller allocates an io state with: exofs_get_io_state(struct exofs_sb_info *sbi, struct exofs_io_state** ios); Then calles one of: exofs_sbi_create(struct exofs_io_state *ios); exofs_sbi_remove(struct exofs_io_state *ios); exofs_sbi_write(struct exofs_io_state *ios); exofs_sbi_read(struct exofs_io_state *ios); exofs_oi_truncate(struct exofs_i_info *oi, u64 new_len); And when done exofs_put_io_state(struct exofs_io_state *ios); * Convert all source files to use this new API * Convert from bio_alloc to bio_kmalloc * In io engine we make use of the now fixed osd_req_decode_sense There are no functional changes or on disk additions after this patch. Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
2009-11-08 20:54:08 +08:00
out:
return ret;
}
exofs: RAID0 support We now support striping over mirror devices. Including variable sized stripe_unit. Some limits: * stripe_unit must be a multiple of PAGE_SIZE * stripe_unit * stripe_count is maximum upto 32-bit (4Gb) Tested RAID0 over mirrors, RAID0 only, mirrors only. All check. Design notes: * I'm not using a vectored raid-engine mechanism yet. Following the pnfs-objects-layout data-map structure, "Mirror" is just a private case of "group_width" == 1, and RAID0 is a private case of "Mirrors" == 1. The performance lose of the general case over the particular special case optimization is totally negligible, also considering the extra code size. * In general I added a prepare_stripes() stage that divides the to-be-io pages to the participating devices, the previous exofs_ios_write/read, now becomes _write/read_mirrors and a new write/read upper layer loops on all devices calling _write/read_mirrors. Effectively the prepare_stripes stage is the all secret. Also truncate need fixing to accommodate for striping. * In a RAID0 arrangement, in a regular usage scenario, if all inode layouts will start at the same device, the small files fill up the first device and the later devices stay empty, the farther the device the emptier it is. To fix that, each inode will start at a different stripe_unit, according to it's obj_id modulus number-of-stripe-units. And will then span all stripe-units in the same incrementing order wrapping back to the beginning of the device table. We call it a stripe-units moving window. Special consideration was taken to keep all devices in a mirror arrangement identical. So a broken osd-device could just be cloned from one of the mirrors and no FS scrubbing is needed. (We do that by rotating stripe-unit at a time and not a single device at a time.) TODO: We no longer verify object_length == inode->i_size in exofs_iget. (since i_size is stripped on multiple objects now). I should introduce a multiple-device attribute reading, and use it in exofs_iget. Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
2010-02-01 19:35:51 +08:00
int exofs_sbi_write(struct exofs_io_state *ios)
{
int i;
int ret;
ret = _prepare_for_striping(ios);
if (unlikely(ret))
return ret;
for (i = 0; i < ios->numdevs; i += ios->layout->mirrors_p1) {
ret = _sbi_write_mirror(ios, i);
if (unlikely(ret))
return ret;
}
ret = exofs_io_execute(ios);
return ret;
}
static int _sbi_read_mirror(struct exofs_io_state *ios, unsigned cur_comp)
exofs: Move all operations to an io_engine In anticipation for multi-device operations, we separate osd operations into an abstract I/O API. Currently only one device is used but later when adding more devices, we will drive all devices in parallel according to a "data_map" that describes how data is arranged on multiple devices. The file system level operates, like before, as if there is one object (inode-number) and an i_size. The io engine will split this to the same object-number but on multiple device. At first we introduce Mirror (raid 1) layout. But at the final outcome we intend to fully implement the pNFS-Objects data-map, including raid 0,4,5,6 over mirrored devices, over multiple device-groups. And more. See: http://tools.ietf.org/html/draft-ietf-nfsv4-pnfs-obj-12 * Define an io_state based API for accessing osd storage devices in an abstract way. Usage: First a caller allocates an io state with: exofs_get_io_state(struct exofs_sb_info *sbi, struct exofs_io_state** ios); Then calles one of: exofs_sbi_create(struct exofs_io_state *ios); exofs_sbi_remove(struct exofs_io_state *ios); exofs_sbi_write(struct exofs_io_state *ios); exofs_sbi_read(struct exofs_io_state *ios); exofs_oi_truncate(struct exofs_i_info *oi, u64 new_len); And when done exofs_put_io_state(struct exofs_io_state *ios); * Convert all source files to use this new API * Convert from bio_alloc to bio_kmalloc * In io engine we make use of the now fixed osd_req_decode_sense There are no functional changes or on disk additions after this patch. Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
2009-11-08 20:54:08 +08:00
{
struct osd_request *or;
exofs: RAID0 support We now support striping over mirror devices. Including variable sized stripe_unit. Some limits: * stripe_unit must be a multiple of PAGE_SIZE * stripe_unit * stripe_count is maximum upto 32-bit (4Gb) Tested RAID0 over mirrors, RAID0 only, mirrors only. All check. Design notes: * I'm not using a vectored raid-engine mechanism yet. Following the pnfs-objects-layout data-map structure, "Mirror" is just a private case of "group_width" == 1, and RAID0 is a private case of "Mirrors" == 1. The performance lose of the general case over the particular special case optimization is totally negligible, also considering the extra code size. * In general I added a prepare_stripes() stage that divides the to-be-io pages to the participating devices, the previous exofs_ios_write/read, now becomes _write/read_mirrors and a new write/read upper layer loops on all devices calling _write/read_mirrors. Effectively the prepare_stripes stage is the all secret. Also truncate need fixing to accommodate for striping. * In a RAID0 arrangement, in a regular usage scenario, if all inode layouts will start at the same device, the small files fill up the first device and the later devices stay empty, the farther the device the emptier it is. To fix that, each inode will start at a different stripe_unit, according to it's obj_id modulus number-of-stripe-units. And will then span all stripe-units in the same incrementing order wrapping back to the beginning of the device table. We call it a stripe-units moving window. Special consideration was taken to keep all devices in a mirror arrangement identical. So a broken osd-device could just be cloned from one of the mirrors and no FS scrubbing is needed. (We do that by rotating stripe-unit at a time and not a single device at a time.) TODO: We no longer verify object_length == inode->i_size in exofs_iget. (since i_size is stripped on multiple objects now). I should introduce a multiple-device attribute reading, and use it in exofs_iget. Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
2010-02-01 19:35:51 +08:00
struct exofs_per_dev_state *per_dev = &ios->per_dev[cur_comp];
unsigned first_dev = (unsigned)ios->obj.id;
exofs: Move all operations to an io_engine In anticipation for multi-device operations, we separate osd operations into an abstract I/O API. Currently only one device is used but later when adding more devices, we will drive all devices in parallel according to a "data_map" that describes how data is arranged on multiple devices. The file system level operates, like before, as if there is one object (inode-number) and an i_size. The io engine will split this to the same object-number but on multiple device. At first we introduce Mirror (raid 1) layout. But at the final outcome we intend to fully implement the pNFS-Objects data-map, including raid 0,4,5,6 over mirrored devices, over multiple device-groups. And more. See: http://tools.ietf.org/html/draft-ietf-nfsv4-pnfs-obj-12 * Define an io_state based API for accessing osd storage devices in an abstract way. Usage: First a caller allocates an io state with: exofs_get_io_state(struct exofs_sb_info *sbi, struct exofs_io_state** ios); Then calles one of: exofs_sbi_create(struct exofs_io_state *ios); exofs_sbi_remove(struct exofs_io_state *ios); exofs_sbi_write(struct exofs_io_state *ios); exofs_sbi_read(struct exofs_io_state *ios); exofs_oi_truncate(struct exofs_i_info *oi, u64 new_len); And when done exofs_put_io_state(struct exofs_io_state *ios); * Convert all source files to use this new API * Convert from bio_alloc to bio_kmalloc * In io engine we make use of the now fixed osd_req_decode_sense There are no functional changes or on disk additions after this patch. Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
2009-11-08 20:54:08 +08:00
if (ios->pages && !per_dev->length)
return 0; /* Just an empty slot */
exofs: RAID0 support We now support striping over mirror devices. Including variable sized stripe_unit. Some limits: * stripe_unit must be a multiple of PAGE_SIZE * stripe_unit * stripe_count is maximum upto 32-bit (4Gb) Tested RAID0 over mirrors, RAID0 only, mirrors only. All check. Design notes: * I'm not using a vectored raid-engine mechanism yet. Following the pnfs-objects-layout data-map structure, "Mirror" is just a private case of "group_width" == 1, and RAID0 is a private case of "Mirrors" == 1. The performance lose of the general case over the particular special case optimization is totally negligible, also considering the extra code size. * In general I added a prepare_stripes() stage that divides the to-be-io pages to the participating devices, the previous exofs_ios_write/read, now becomes _write/read_mirrors and a new write/read upper layer loops on all devices calling _write/read_mirrors. Effectively the prepare_stripes stage is the all secret. Also truncate need fixing to accommodate for striping. * In a RAID0 arrangement, in a regular usage scenario, if all inode layouts will start at the same device, the small files fill up the first device and the later devices stay empty, the farther the device the emptier it is. To fix that, each inode will start at a different stripe_unit, according to it's obj_id modulus number-of-stripe-units. And will then span all stripe-units in the same incrementing order wrapping back to the beginning of the device table. We call it a stripe-units moving window. Special consideration was taken to keep all devices in a mirror arrangement identical. So a broken osd-device could just be cloned from one of the mirrors and no FS scrubbing is needed. (We do that by rotating stripe-unit at a time and not a single device at a time.) TODO: We no longer verify object_length == inode->i_size in exofs_iget. (since i_size is stripped on multiple objects now). I should introduce a multiple-device attribute reading, and use it in exofs_iget. Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
2010-02-01 19:35:51 +08:00
first_dev = per_dev->dev + first_dev % ios->layout->mirrors_p1;
exofs: Define on-disk per-inode optional layout attribute * Layouts describe the way a file is spread on multiple devices. The layout information is stored in the objects attribute introduced in this patch. * There can be multiple generating function for the layout. Currently defined: - No attribute present - use below moving-window on global device table, all devices. (This is the only one currently used in exofs) - an obj_id generated moving window - the obj_id is a randomizing factor in the otherwise global map layout. - An explicit layout stored, including a data_map and a device index list. - More might be defined in future ... * There are two attributes defined of the same structure: A-data-files-layout - This layout is used by data-files. If present at a directory, all files of that directory will be created with this layout. A-meta-data-layout - This layout is used by a directory and other meta-data information. Also inherited at creation of subdirectories. * At creation time inodes are created with the layout specified above. A usermode utility may change the creation layout on a give directory or file. Which in the case of directories, will also apply to newly created files/subdirectories, children of that directory. In the simple unaltered case of a newly created exofs, no layout attributes are present, and all layouts adhere to the layout specified at the device-table. * In case of a future file system loaded in an old exofs-driver. At iget(), the generating_function is inspected and if not supported will return an IO error to the application and the inode will not be loaded. So not to damage any data. Note: After this patch we do not yet support any type of layout only the RAID0 patch that enables striping at the super-block level will add support for RAID0 layouts above. This way we are past and future compatible and fully bisectable. * Access to the device table is done by an accessor since it will change according to above information. Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
2010-01-28 17:58:08 +08:00
or = osd_start_request(exofs_ios_od(ios, first_dev), GFP_KERNEL);
if (unlikely(!or)) {
EXOFS_ERR("%s: osd_start_request failed\n", __func__);
return -ENOMEM;
}
per_dev->or = or;
if (ios->pages) {
exofs: RAID0 support We now support striping over mirror devices. Including variable sized stripe_unit. Some limits: * stripe_unit must be a multiple of PAGE_SIZE * stripe_unit * stripe_count is maximum upto 32-bit (4Gb) Tested RAID0 over mirrors, RAID0 only, mirrors only. All check. Design notes: * I'm not using a vectored raid-engine mechanism yet. Following the pnfs-objects-layout data-map structure, "Mirror" is just a private case of "group_width" == 1, and RAID0 is a private case of "Mirrors" == 1. The performance lose of the general case over the particular special case optimization is totally negligible, also considering the extra code size. * In general I added a prepare_stripes() stage that divides the to-be-io pages to the participating devices, the previous exofs_ios_write/read, now becomes _write/read_mirrors and a new write/read upper layer loops on all devices calling _write/read_mirrors. Effectively the prepare_stripes stage is the all secret. Also truncate need fixing to accommodate for striping. * In a RAID0 arrangement, in a regular usage scenario, if all inode layouts will start at the same device, the small files fill up the first device and the later devices stay empty, the farther the device the emptier it is. To fix that, each inode will start at a different stripe_unit, according to it's obj_id modulus number-of-stripe-units. And will then span all stripe-units in the same incrementing order wrapping back to the beginning of the device table. We call it a stripe-units moving window. Special consideration was taken to keep all devices in a mirror arrangement identical. So a broken osd-device could just be cloned from one of the mirrors and no FS scrubbing is needed. (We do that by rotating stripe-unit at a time and not a single device at a time.) TODO: We no longer verify object_length == inode->i_size in exofs_iget. (since i_size is stripped on multiple objects now). I should introduce a multiple-device attribute reading, and use it in exofs_iget. Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
2010-02-01 19:35:51 +08:00
osd_req_read(or, &ios->obj, per_dev->offset,
per_dev->bio, per_dev->length);
EXOFS_DBGMSG("read(0x%llx) offset=0x%llx length=0x%llx"
" dev=%d\n", _LLU(ios->obj.id),
exofs: RAID0 support We now support striping over mirror devices. Including variable sized stripe_unit. Some limits: * stripe_unit must be a multiple of PAGE_SIZE * stripe_unit * stripe_count is maximum upto 32-bit (4Gb) Tested RAID0 over mirrors, RAID0 only, mirrors only. All check. Design notes: * I'm not using a vectored raid-engine mechanism yet. Following the pnfs-objects-layout data-map structure, "Mirror" is just a private case of "group_width" == 1, and RAID0 is a private case of "Mirrors" == 1. The performance lose of the general case over the particular special case optimization is totally negligible, also considering the extra code size. * In general I added a prepare_stripes() stage that divides the to-be-io pages to the participating devices, the previous exofs_ios_write/read, now becomes _write/read_mirrors and a new write/read upper layer loops on all devices calling _write/read_mirrors. Effectively the prepare_stripes stage is the all secret. Also truncate need fixing to accommodate for striping. * In a RAID0 arrangement, in a regular usage scenario, if all inode layouts will start at the same device, the small files fill up the first device and the later devices stay empty, the farther the device the emptier it is. To fix that, each inode will start at a different stripe_unit, according to it's obj_id modulus number-of-stripe-units. And will then span all stripe-units in the same incrementing order wrapping back to the beginning of the device table. We call it a stripe-units moving window. Special consideration was taken to keep all devices in a mirror arrangement identical. So a broken osd-device could just be cloned from one of the mirrors and no FS scrubbing is needed. (We do that by rotating stripe-unit at a time and not a single device at a time.) TODO: We no longer verify object_length == inode->i_size in exofs_iget. (since i_size is stripped on multiple objects now). I should introduce a multiple-device attribute reading, and use it in exofs_iget. Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
2010-02-01 19:35:51 +08:00
_LLU(per_dev->offset), _LLU(per_dev->length),
first_dev);
} else if (ios->kern_buff) {
exofs: RAID0 support We now support striping over mirror devices. Including variable sized stripe_unit. Some limits: * stripe_unit must be a multiple of PAGE_SIZE * stripe_unit * stripe_count is maximum upto 32-bit (4Gb) Tested RAID0 over mirrors, RAID0 only, mirrors only. All check. Design notes: * I'm not using a vectored raid-engine mechanism yet. Following the pnfs-objects-layout data-map structure, "Mirror" is just a private case of "group_width" == 1, and RAID0 is a private case of "Mirrors" == 1. The performance lose of the general case over the particular special case optimization is totally negligible, also considering the extra code size. * In general I added a prepare_stripes() stage that divides the to-be-io pages to the participating devices, the previous exofs_ios_write/read, now becomes _write/read_mirrors and a new write/read upper layer loops on all devices calling _write/read_mirrors. Effectively the prepare_stripes stage is the all secret. Also truncate need fixing to accommodate for striping. * In a RAID0 arrangement, in a regular usage scenario, if all inode layouts will start at the same device, the small files fill up the first device and the later devices stay empty, the farther the device the emptier it is. To fix that, each inode will start at a different stripe_unit, according to it's obj_id modulus number-of-stripe-units. And will then span all stripe-units in the same incrementing order wrapping back to the beginning of the device table. We call it a stripe-units moving window. Special consideration was taken to keep all devices in a mirror arrangement identical. So a broken osd-device could just be cloned from one of the mirrors and no FS scrubbing is needed. (We do that by rotating stripe-unit at a time and not a single device at a time.) TODO: We no longer verify object_length == inode->i_size in exofs_iget. (since i_size is stripped on multiple objects now). I should introduce a multiple-device attribute reading, and use it in exofs_iget. Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
2010-02-01 19:35:51 +08:00
int ret = osd_req_read_kern(or, &ios->obj, per_dev->offset,
ios->kern_buff, ios->length);
EXOFS_DBGMSG2("read_kern(0x%llx) offset=0x%llx "
"length=0x%llx dev=%d ret=>%d\n",
exofs: RAID0 support We now support striping over mirror devices. Including variable sized stripe_unit. Some limits: * stripe_unit must be a multiple of PAGE_SIZE * stripe_unit * stripe_count is maximum upto 32-bit (4Gb) Tested RAID0 over mirrors, RAID0 only, mirrors only. All check. Design notes: * I'm not using a vectored raid-engine mechanism yet. Following the pnfs-objects-layout data-map structure, "Mirror" is just a private case of "group_width" == 1, and RAID0 is a private case of "Mirrors" == 1. The performance lose of the general case over the particular special case optimization is totally negligible, also considering the extra code size. * In general I added a prepare_stripes() stage that divides the to-be-io pages to the participating devices, the previous exofs_ios_write/read, now becomes _write/read_mirrors and a new write/read upper layer loops on all devices calling _write/read_mirrors. Effectively the prepare_stripes stage is the all secret. Also truncate need fixing to accommodate for striping. * In a RAID0 arrangement, in a regular usage scenario, if all inode layouts will start at the same device, the small files fill up the first device and the later devices stay empty, the farther the device the emptier it is. To fix that, each inode will start at a different stripe_unit, according to it's obj_id modulus number-of-stripe-units. And will then span all stripe-units in the same incrementing order wrapping back to the beginning of the device table. We call it a stripe-units moving window. Special consideration was taken to keep all devices in a mirror arrangement identical. So a broken osd-device could just be cloned from one of the mirrors and no FS scrubbing is needed. (We do that by rotating stripe-unit at a time and not a single device at a time.) TODO: We no longer verify object_length == inode->i_size in exofs_iget. (since i_size is stripped on multiple objects now). I should introduce a multiple-device attribute reading, and use it in exofs_iget. Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
2010-02-01 19:35:51 +08:00
_LLU(ios->obj.id), _LLU(per_dev->offset),
_LLU(ios->length), first_dev, ret);
if (unlikely(ret))
return ret;
} else {
osd_req_get_attributes(or, &ios->obj);
EXOFS_DBGMSG2("obj(0x%llx) get_attributes=%d dev=%d\n",
_LLU(ios->obj.id), ios->in_attr_len, first_dev);
}
if (ios->out_attr)
osd_req_add_set_attr_list(or, ios->out_attr, ios->out_attr_len);
if (ios->in_attr)
osd_req_add_get_attr_list(or, ios->in_attr, ios->in_attr_len);
exofs: RAID0 support We now support striping over mirror devices. Including variable sized stripe_unit. Some limits: * stripe_unit must be a multiple of PAGE_SIZE * stripe_unit * stripe_count is maximum upto 32-bit (4Gb) Tested RAID0 over mirrors, RAID0 only, mirrors only. All check. Design notes: * I'm not using a vectored raid-engine mechanism yet. Following the pnfs-objects-layout data-map structure, "Mirror" is just a private case of "group_width" == 1, and RAID0 is a private case of "Mirrors" == 1. The performance lose of the general case over the particular special case optimization is totally negligible, also considering the extra code size. * In general I added a prepare_stripes() stage that divides the to-be-io pages to the participating devices, the previous exofs_ios_write/read, now becomes _write/read_mirrors and a new write/read upper layer loops on all devices calling _write/read_mirrors. Effectively the prepare_stripes stage is the all secret. Also truncate need fixing to accommodate for striping. * In a RAID0 arrangement, in a regular usage scenario, if all inode layouts will start at the same device, the small files fill up the first device and the later devices stay empty, the farther the device the emptier it is. To fix that, each inode will start at a different stripe_unit, according to it's obj_id modulus number-of-stripe-units. And will then span all stripe-units in the same incrementing order wrapping back to the beginning of the device table. We call it a stripe-units moving window. Special consideration was taken to keep all devices in a mirror arrangement identical. So a broken osd-device could just be cloned from one of the mirrors and no FS scrubbing is needed. (We do that by rotating stripe-unit at a time and not a single device at a time.) TODO: We no longer verify object_length == inode->i_size in exofs_iget. (since i_size is stripped on multiple objects now). I should introduce a multiple-device attribute reading, and use it in exofs_iget. Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
2010-02-01 19:35:51 +08:00
return 0;
}
int exofs_sbi_read(struct exofs_io_state *ios)
{
int i;
int ret;
ret = _prepare_for_striping(ios);
if (unlikely(ret))
return ret;
for (i = 0; i < ios->numdevs; i += ios->layout->mirrors_p1) {
ret = _sbi_read_mirror(ios, i);
if (unlikely(ret))
return ret;
}
ret = exofs_io_execute(ios);
return ret;
}
exofs: Move all operations to an io_engine In anticipation for multi-device operations, we separate osd operations into an abstract I/O API. Currently only one device is used but later when adding more devices, we will drive all devices in parallel according to a "data_map" that describes how data is arranged on multiple devices. The file system level operates, like before, as if there is one object (inode-number) and an i_size. The io engine will split this to the same object-number but on multiple device. At first we introduce Mirror (raid 1) layout. But at the final outcome we intend to fully implement the pNFS-Objects data-map, including raid 0,4,5,6 over mirrored devices, over multiple device-groups. And more. See: http://tools.ietf.org/html/draft-ietf-nfsv4-pnfs-obj-12 * Define an io_state based API for accessing osd storage devices in an abstract way. Usage: First a caller allocates an io state with: exofs_get_io_state(struct exofs_sb_info *sbi, struct exofs_io_state** ios); Then calles one of: exofs_sbi_create(struct exofs_io_state *ios); exofs_sbi_remove(struct exofs_io_state *ios); exofs_sbi_write(struct exofs_io_state *ios); exofs_sbi_read(struct exofs_io_state *ios); exofs_oi_truncate(struct exofs_i_info *oi, u64 new_len); And when done exofs_put_io_state(struct exofs_io_state *ios); * Convert all source files to use this new API * Convert from bio_alloc to bio_kmalloc * In io engine we make use of the now fixed osd_req_decode_sense There are no functional changes or on disk additions after this patch. Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
2009-11-08 20:54:08 +08:00
int extract_attr_from_ios(struct exofs_io_state *ios, struct osd_attr *attr)
{
struct osd_attr cur_attr = {.attr_page = 0}; /* start with zeros */
void *iter = NULL;
int nelem;
do {
nelem = 1;
exofs: Move all operations to an io_engine In anticipation for multi-device operations, we separate osd operations into an abstract I/O API. Currently only one device is used but later when adding more devices, we will drive all devices in parallel according to a "data_map" that describes how data is arranged on multiple devices. The file system level operates, like before, as if there is one object (inode-number) and an i_size. The io engine will split this to the same object-number but on multiple device. At first we introduce Mirror (raid 1) layout. But at the final outcome we intend to fully implement the pNFS-Objects data-map, including raid 0,4,5,6 over mirrored devices, over multiple device-groups. And more. See: http://tools.ietf.org/html/draft-ietf-nfsv4-pnfs-obj-12 * Define an io_state based API for accessing osd storage devices in an abstract way. Usage: First a caller allocates an io state with: exofs_get_io_state(struct exofs_sb_info *sbi, struct exofs_io_state** ios); Then calles one of: exofs_sbi_create(struct exofs_io_state *ios); exofs_sbi_remove(struct exofs_io_state *ios); exofs_sbi_write(struct exofs_io_state *ios); exofs_sbi_read(struct exofs_io_state *ios); exofs_oi_truncate(struct exofs_i_info *oi, u64 new_len); And when done exofs_put_io_state(struct exofs_io_state *ios); * Convert all source files to use this new API * Convert from bio_alloc to bio_kmalloc * In io engine we make use of the now fixed osd_req_decode_sense There are no functional changes or on disk additions after this patch. Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
2009-11-08 20:54:08 +08:00
osd_req_decode_get_attr_list(ios->per_dev[0].or,
&cur_attr, &nelem, &iter);
if ((cur_attr.attr_page == attr->attr_page) &&
(cur_attr.attr_id == attr->attr_id)) {
attr->len = cur_attr.len;
attr->val_ptr = cur_attr.val_ptr;
return 0;
}
} while (iter);
return -EIO;
}
exofs: Move all operations to an io_engine In anticipation for multi-device operations, we separate osd operations into an abstract I/O API. Currently only one device is used but later when adding more devices, we will drive all devices in parallel according to a "data_map" that describes how data is arranged on multiple devices. The file system level operates, like before, as if there is one object (inode-number) and an i_size. The io engine will split this to the same object-number but on multiple device. At first we introduce Mirror (raid 1) layout. But at the final outcome we intend to fully implement the pNFS-Objects data-map, including raid 0,4,5,6 over mirrored devices, over multiple device-groups. And more. See: http://tools.ietf.org/html/draft-ietf-nfsv4-pnfs-obj-12 * Define an io_state based API for accessing osd storage devices in an abstract way. Usage: First a caller allocates an io state with: exofs_get_io_state(struct exofs_sb_info *sbi, struct exofs_io_state** ios); Then calles one of: exofs_sbi_create(struct exofs_io_state *ios); exofs_sbi_remove(struct exofs_io_state *ios); exofs_sbi_write(struct exofs_io_state *ios); exofs_sbi_read(struct exofs_io_state *ios); exofs_oi_truncate(struct exofs_i_info *oi, u64 new_len); And when done exofs_put_io_state(struct exofs_io_state *ios); * Convert all source files to use this new API * Convert from bio_alloc to bio_kmalloc * In io engine we make use of the now fixed osd_req_decode_sense There are no functional changes or on disk additions after this patch. Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
2009-11-08 20:54:08 +08:00
exofs: RAID0 support We now support striping over mirror devices. Including variable sized stripe_unit. Some limits: * stripe_unit must be a multiple of PAGE_SIZE * stripe_unit * stripe_count is maximum upto 32-bit (4Gb) Tested RAID0 over mirrors, RAID0 only, mirrors only. All check. Design notes: * I'm not using a vectored raid-engine mechanism yet. Following the pnfs-objects-layout data-map structure, "Mirror" is just a private case of "group_width" == 1, and RAID0 is a private case of "Mirrors" == 1. The performance lose of the general case over the particular special case optimization is totally negligible, also considering the extra code size. * In general I added a prepare_stripes() stage that divides the to-be-io pages to the participating devices, the previous exofs_ios_write/read, now becomes _write/read_mirrors and a new write/read upper layer loops on all devices calling _write/read_mirrors. Effectively the prepare_stripes stage is the all secret. Also truncate need fixing to accommodate for striping. * In a RAID0 arrangement, in a regular usage scenario, if all inode layouts will start at the same device, the small files fill up the first device and the later devices stay empty, the farther the device the emptier it is. To fix that, each inode will start at a different stripe_unit, according to it's obj_id modulus number-of-stripe-units. And will then span all stripe-units in the same incrementing order wrapping back to the beginning of the device table. We call it a stripe-units moving window. Special consideration was taken to keep all devices in a mirror arrangement identical. So a broken osd-device could just be cloned from one of the mirrors and no FS scrubbing is needed. (We do that by rotating stripe-unit at a time and not a single device at a time.) TODO: We no longer verify object_length == inode->i_size in exofs_iget. (since i_size is stripped on multiple objects now). I should introduce a multiple-device attribute reading, and use it in exofs_iget. Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
2010-02-01 19:35:51 +08:00
static int _truncate_mirrors(struct exofs_io_state *ios, unsigned cur_comp,
struct osd_attr *attr)
{
int last_comp = cur_comp + ios->layout->mirrors_p1;
for (; cur_comp < last_comp; ++cur_comp) {
struct exofs_per_dev_state *per_dev = &ios->per_dev[cur_comp];
struct osd_request *or;
or = osd_start_request(exofs_ios_od(ios, cur_comp), GFP_KERNEL);
if (unlikely(!or)) {
EXOFS_ERR("%s: osd_start_request failed\n", __func__);
return -ENOMEM;
}
per_dev->or = or;
osd_req_set_attributes(or, &ios->obj);
osd_req_add_set_attr_list(or, attr, 1);
}
return 0;
}
exofs: Move all operations to an io_engine In anticipation for multi-device operations, we separate osd operations into an abstract I/O API. Currently only one device is used but later when adding more devices, we will drive all devices in parallel according to a "data_map" that describes how data is arranged on multiple devices. The file system level operates, like before, as if there is one object (inode-number) and an i_size. The io engine will split this to the same object-number but on multiple device. At first we introduce Mirror (raid 1) layout. But at the final outcome we intend to fully implement the pNFS-Objects data-map, including raid 0,4,5,6 over mirrored devices, over multiple device-groups. And more. See: http://tools.ietf.org/html/draft-ietf-nfsv4-pnfs-obj-12 * Define an io_state based API for accessing osd storage devices in an abstract way. Usage: First a caller allocates an io state with: exofs_get_io_state(struct exofs_sb_info *sbi, struct exofs_io_state** ios); Then calles one of: exofs_sbi_create(struct exofs_io_state *ios); exofs_sbi_remove(struct exofs_io_state *ios); exofs_sbi_write(struct exofs_io_state *ios); exofs_sbi_read(struct exofs_io_state *ios); exofs_oi_truncate(struct exofs_i_info *oi, u64 new_len); And when done exofs_put_io_state(struct exofs_io_state *ios); * Convert all source files to use this new API * Convert from bio_alloc to bio_kmalloc * In io engine we make use of the now fixed osd_req_decode_sense There are no functional changes or on disk additions after this patch. Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
2009-11-08 20:54:08 +08:00
int exofs_oi_truncate(struct exofs_i_info *oi, u64 size)
{
struct exofs_sb_info *sbi = oi->vfs_inode.i_sb->s_fs_info;
struct exofs_io_state *ios;
exofs: RAID0 support We now support striping over mirror devices. Including variable sized stripe_unit. Some limits: * stripe_unit must be a multiple of PAGE_SIZE * stripe_unit * stripe_count is maximum upto 32-bit (4Gb) Tested RAID0 over mirrors, RAID0 only, mirrors only. All check. Design notes: * I'm not using a vectored raid-engine mechanism yet. Following the pnfs-objects-layout data-map structure, "Mirror" is just a private case of "group_width" == 1, and RAID0 is a private case of "Mirrors" == 1. The performance lose of the general case over the particular special case optimization is totally negligible, also considering the extra code size. * In general I added a prepare_stripes() stage that divides the to-be-io pages to the participating devices, the previous exofs_ios_write/read, now becomes _write/read_mirrors and a new write/read upper layer loops on all devices calling _write/read_mirrors. Effectively the prepare_stripes stage is the all secret. Also truncate need fixing to accommodate for striping. * In a RAID0 arrangement, in a regular usage scenario, if all inode layouts will start at the same device, the small files fill up the first device and the later devices stay empty, the farther the device the emptier it is. To fix that, each inode will start at a different stripe_unit, according to it's obj_id modulus number-of-stripe-units. And will then span all stripe-units in the same incrementing order wrapping back to the beginning of the device table. We call it a stripe-units moving window. Special consideration was taken to keep all devices in a mirror arrangement identical. So a broken osd-device could just be cloned from one of the mirrors and no FS scrubbing is needed. (We do that by rotating stripe-unit at a time and not a single device at a time.) TODO: We no longer verify object_length == inode->i_size in exofs_iget. (since i_size is stripped on multiple objects now). I should introduce a multiple-device attribute reading, and use it in exofs_iget. Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
2010-02-01 19:35:51 +08:00
struct exofs_trunc_attr {
struct osd_attr attr;
__be64 newsize;
} *size_attrs;
struct _striping_info si;
exofs: Move all operations to an io_engine In anticipation for multi-device operations, we separate osd operations into an abstract I/O API. Currently only one device is used but later when adding more devices, we will drive all devices in parallel according to a "data_map" that describes how data is arranged on multiple devices. The file system level operates, like before, as if there is one object (inode-number) and an i_size. The io engine will split this to the same object-number but on multiple device. At first we introduce Mirror (raid 1) layout. But at the final outcome we intend to fully implement the pNFS-Objects data-map, including raid 0,4,5,6 over mirrored devices, over multiple device-groups. And more. See: http://tools.ietf.org/html/draft-ietf-nfsv4-pnfs-obj-12 * Define an io_state based API for accessing osd storage devices in an abstract way. Usage: First a caller allocates an io state with: exofs_get_io_state(struct exofs_sb_info *sbi, struct exofs_io_state** ios); Then calles one of: exofs_sbi_create(struct exofs_io_state *ios); exofs_sbi_remove(struct exofs_io_state *ios); exofs_sbi_write(struct exofs_io_state *ios); exofs_sbi_read(struct exofs_io_state *ios); exofs_oi_truncate(struct exofs_i_info *oi, u64 new_len); And when done exofs_put_io_state(struct exofs_io_state *ios); * Convert all source files to use this new API * Convert from bio_alloc to bio_kmalloc * In io engine we make use of the now fixed osd_req_decode_sense There are no functional changes or on disk additions after this patch. Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
2009-11-08 20:54:08 +08:00
int i, ret;
exofs: RAID0 support We now support striping over mirror devices. Including variable sized stripe_unit. Some limits: * stripe_unit must be a multiple of PAGE_SIZE * stripe_unit * stripe_count is maximum upto 32-bit (4Gb) Tested RAID0 over mirrors, RAID0 only, mirrors only. All check. Design notes: * I'm not using a vectored raid-engine mechanism yet. Following the pnfs-objects-layout data-map structure, "Mirror" is just a private case of "group_width" == 1, and RAID0 is a private case of "Mirrors" == 1. The performance lose of the general case over the particular special case optimization is totally negligible, also considering the extra code size. * In general I added a prepare_stripes() stage that divides the to-be-io pages to the participating devices, the previous exofs_ios_write/read, now becomes _write/read_mirrors and a new write/read upper layer loops on all devices calling _write/read_mirrors. Effectively the prepare_stripes stage is the all secret. Also truncate need fixing to accommodate for striping. * In a RAID0 arrangement, in a regular usage scenario, if all inode layouts will start at the same device, the small files fill up the first device and the later devices stay empty, the farther the device the emptier it is. To fix that, each inode will start at a different stripe_unit, according to it's obj_id modulus number-of-stripe-units. And will then span all stripe-units in the same incrementing order wrapping back to the beginning of the device table. We call it a stripe-units moving window. Special consideration was taken to keep all devices in a mirror arrangement identical. So a broken osd-device could just be cloned from one of the mirrors and no FS scrubbing is needed. (We do that by rotating stripe-unit at a time and not a single device at a time.) TODO: We no longer verify object_length == inode->i_size in exofs_iget. (since i_size is stripped on multiple objects now). I should introduce a multiple-device attribute reading, and use it in exofs_iget. Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
2010-02-01 19:35:51 +08:00
ret = exofs_get_io_state(&sbi->layout, &ios);
if (unlikely(ret))
return ret;
size_attrs = kcalloc(ios->layout->group_width, sizeof(*size_attrs),
GFP_KERNEL);
if (unlikely(!size_attrs)) {
ret = -ENOMEM;
goto out;
}
exofs: Move all operations to an io_engine In anticipation for multi-device operations, we separate osd operations into an abstract I/O API. Currently only one device is used but later when adding more devices, we will drive all devices in parallel according to a "data_map" that describes how data is arranged on multiple devices. The file system level operates, like before, as if there is one object (inode-number) and an i_size. The io engine will split this to the same object-number but on multiple device. At first we introduce Mirror (raid 1) layout. But at the final outcome we intend to fully implement the pNFS-Objects data-map, including raid 0,4,5,6 over mirrored devices, over multiple device-groups. And more. See: http://tools.ietf.org/html/draft-ietf-nfsv4-pnfs-obj-12 * Define an io_state based API for accessing osd storage devices in an abstract way. Usage: First a caller allocates an io state with: exofs_get_io_state(struct exofs_sb_info *sbi, struct exofs_io_state** ios); Then calles one of: exofs_sbi_create(struct exofs_io_state *ios); exofs_sbi_remove(struct exofs_io_state *ios); exofs_sbi_write(struct exofs_io_state *ios); exofs_sbi_read(struct exofs_io_state *ios); exofs_oi_truncate(struct exofs_i_info *oi, u64 new_len); And when done exofs_put_io_state(struct exofs_io_state *ios); * Convert all source files to use this new API * Convert from bio_alloc to bio_kmalloc * In io engine we make use of the now fixed osd_req_decode_sense There are no functional changes or on disk additions after this patch. Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
2009-11-08 20:54:08 +08:00
ios->obj.id = exofs_oi_objno(oi);
ios->cred = oi->i_cred;
exofs: RAID0 support We now support striping over mirror devices. Including variable sized stripe_unit. Some limits: * stripe_unit must be a multiple of PAGE_SIZE * stripe_unit * stripe_count is maximum upto 32-bit (4Gb) Tested RAID0 over mirrors, RAID0 only, mirrors only. All check. Design notes: * I'm not using a vectored raid-engine mechanism yet. Following the pnfs-objects-layout data-map structure, "Mirror" is just a private case of "group_width" == 1, and RAID0 is a private case of "Mirrors" == 1. The performance lose of the general case over the particular special case optimization is totally negligible, also considering the extra code size. * In general I added a prepare_stripes() stage that divides the to-be-io pages to the participating devices, the previous exofs_ios_write/read, now becomes _write/read_mirrors and a new write/read upper layer loops on all devices calling _write/read_mirrors. Effectively the prepare_stripes stage is the all secret. Also truncate need fixing to accommodate for striping. * In a RAID0 arrangement, in a regular usage scenario, if all inode layouts will start at the same device, the small files fill up the first device and the later devices stay empty, the farther the device the emptier it is. To fix that, each inode will start at a different stripe_unit, according to it's obj_id modulus number-of-stripe-units. And will then span all stripe-units in the same incrementing order wrapping back to the beginning of the device table. We call it a stripe-units moving window. Special consideration was taken to keep all devices in a mirror arrangement identical. So a broken osd-device could just be cloned from one of the mirrors and no FS scrubbing is needed. (We do that by rotating stripe-unit at a time and not a single device at a time.) TODO: We no longer verify object_length == inode->i_size in exofs_iget. (since i_size is stripped on multiple objects now). I should introduce a multiple-device attribute reading, and use it in exofs_iget. Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
2010-02-01 19:35:51 +08:00
ios->numdevs = ios->layout->s_numdevs;
_calc_stripe_info(ios, size, &si);
exofs: Move all operations to an io_engine In anticipation for multi-device operations, we separate osd operations into an abstract I/O API. Currently only one device is used but later when adding more devices, we will drive all devices in parallel according to a "data_map" that describes how data is arranged on multiple devices. The file system level operates, like before, as if there is one object (inode-number) and an i_size. The io engine will split this to the same object-number but on multiple device. At first we introduce Mirror (raid 1) layout. But at the final outcome we intend to fully implement the pNFS-Objects data-map, including raid 0,4,5,6 over mirrored devices, over multiple device-groups. And more. See: http://tools.ietf.org/html/draft-ietf-nfsv4-pnfs-obj-12 * Define an io_state based API for accessing osd storage devices in an abstract way. Usage: First a caller allocates an io state with: exofs_get_io_state(struct exofs_sb_info *sbi, struct exofs_io_state** ios); Then calles one of: exofs_sbi_create(struct exofs_io_state *ios); exofs_sbi_remove(struct exofs_io_state *ios); exofs_sbi_write(struct exofs_io_state *ios); exofs_sbi_read(struct exofs_io_state *ios); exofs_oi_truncate(struct exofs_i_info *oi, u64 new_len); And when done exofs_put_io_state(struct exofs_io_state *ios); * Convert all source files to use this new API * Convert from bio_alloc to bio_kmalloc * In io engine we make use of the now fixed osd_req_decode_sense There are no functional changes or on disk additions after this patch. Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
2009-11-08 20:54:08 +08:00
exofs: RAID0 support We now support striping over mirror devices. Including variable sized stripe_unit. Some limits: * stripe_unit must be a multiple of PAGE_SIZE * stripe_unit * stripe_count is maximum upto 32-bit (4Gb) Tested RAID0 over mirrors, RAID0 only, mirrors only. All check. Design notes: * I'm not using a vectored raid-engine mechanism yet. Following the pnfs-objects-layout data-map structure, "Mirror" is just a private case of "group_width" == 1, and RAID0 is a private case of "Mirrors" == 1. The performance lose of the general case over the particular special case optimization is totally negligible, also considering the extra code size. * In general I added a prepare_stripes() stage that divides the to-be-io pages to the participating devices, the previous exofs_ios_write/read, now becomes _write/read_mirrors and a new write/read upper layer loops on all devices calling _write/read_mirrors. Effectively the prepare_stripes stage is the all secret. Also truncate need fixing to accommodate for striping. * In a RAID0 arrangement, in a regular usage scenario, if all inode layouts will start at the same device, the small files fill up the first device and the later devices stay empty, the farther the device the emptier it is. To fix that, each inode will start at a different stripe_unit, according to it's obj_id modulus number-of-stripe-units. And will then span all stripe-units in the same incrementing order wrapping back to the beginning of the device table. We call it a stripe-units moving window. Special consideration was taken to keep all devices in a mirror arrangement identical. So a broken osd-device could just be cloned from one of the mirrors and no FS scrubbing is needed. (We do that by rotating stripe-unit at a time and not a single device at a time.) TODO: We no longer verify object_length == inode->i_size in exofs_iget. (since i_size is stripped on multiple objects now). I should introduce a multiple-device attribute reading, and use it in exofs_iget. Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
2010-02-01 19:35:51 +08:00
for (i = 0; i < ios->layout->group_width; ++i) {
struct exofs_trunc_attr *size_attr = &size_attrs[i];
u64 obj_size;
exofs: Move all operations to an io_engine In anticipation for multi-device operations, we separate osd operations into an abstract I/O API. Currently only one device is used but later when adding more devices, we will drive all devices in parallel according to a "data_map" that describes how data is arranged on multiple devices. The file system level operates, like before, as if there is one object (inode-number) and an i_size. The io engine will split this to the same object-number but on multiple device. At first we introduce Mirror (raid 1) layout. But at the final outcome we intend to fully implement the pNFS-Objects data-map, including raid 0,4,5,6 over mirrored devices, over multiple device-groups. And more. See: http://tools.ietf.org/html/draft-ietf-nfsv4-pnfs-obj-12 * Define an io_state based API for accessing osd storage devices in an abstract way. Usage: First a caller allocates an io state with: exofs_get_io_state(struct exofs_sb_info *sbi, struct exofs_io_state** ios); Then calles one of: exofs_sbi_create(struct exofs_io_state *ios); exofs_sbi_remove(struct exofs_io_state *ios); exofs_sbi_write(struct exofs_io_state *ios); exofs_sbi_read(struct exofs_io_state *ios); exofs_oi_truncate(struct exofs_i_info *oi, u64 new_len); And when done exofs_put_io_state(struct exofs_io_state *ios); * Convert all source files to use this new API * Convert from bio_alloc to bio_kmalloc * In io engine we make use of the now fixed osd_req_decode_sense There are no functional changes or on disk additions after this patch. Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
2009-11-08 20:54:08 +08:00
if (i < si.dev)
obj_size = si.obj_offset +
ios->layout->stripe_unit - si.unit_off;
else if (i == si.dev)
obj_size = si.obj_offset;
else /* i > si.dev */
obj_size = si.obj_offset - si.unit_off;
exofs: Move all operations to an io_engine In anticipation for multi-device operations, we separate osd operations into an abstract I/O API. Currently only one device is used but later when adding more devices, we will drive all devices in parallel according to a "data_map" that describes how data is arranged on multiple devices. The file system level operates, like before, as if there is one object (inode-number) and an i_size. The io engine will split this to the same object-number but on multiple device. At first we introduce Mirror (raid 1) layout. But at the final outcome we intend to fully implement the pNFS-Objects data-map, including raid 0,4,5,6 over mirrored devices, over multiple device-groups. And more. See: http://tools.ietf.org/html/draft-ietf-nfsv4-pnfs-obj-12 * Define an io_state based API for accessing osd storage devices in an abstract way. Usage: First a caller allocates an io state with: exofs_get_io_state(struct exofs_sb_info *sbi, struct exofs_io_state** ios); Then calles one of: exofs_sbi_create(struct exofs_io_state *ios); exofs_sbi_remove(struct exofs_io_state *ios); exofs_sbi_write(struct exofs_io_state *ios); exofs_sbi_read(struct exofs_io_state *ios); exofs_oi_truncate(struct exofs_i_info *oi, u64 new_len); And when done exofs_put_io_state(struct exofs_io_state *ios); * Convert all source files to use this new API * Convert from bio_alloc to bio_kmalloc * In io engine we make use of the now fixed osd_req_decode_sense There are no functional changes or on disk additions after this patch. Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
2009-11-08 20:54:08 +08:00
exofs: RAID0 support We now support striping over mirror devices. Including variable sized stripe_unit. Some limits: * stripe_unit must be a multiple of PAGE_SIZE * stripe_unit * stripe_count is maximum upto 32-bit (4Gb) Tested RAID0 over mirrors, RAID0 only, mirrors only. All check. Design notes: * I'm not using a vectored raid-engine mechanism yet. Following the pnfs-objects-layout data-map structure, "Mirror" is just a private case of "group_width" == 1, and RAID0 is a private case of "Mirrors" == 1. The performance lose of the general case over the particular special case optimization is totally negligible, also considering the extra code size. * In general I added a prepare_stripes() stage that divides the to-be-io pages to the participating devices, the previous exofs_ios_write/read, now becomes _write/read_mirrors and a new write/read upper layer loops on all devices calling _write/read_mirrors. Effectively the prepare_stripes stage is the all secret. Also truncate need fixing to accommodate for striping. * In a RAID0 arrangement, in a regular usage scenario, if all inode layouts will start at the same device, the small files fill up the first device and the later devices stay empty, the farther the device the emptier it is. To fix that, each inode will start at a different stripe_unit, according to it's obj_id modulus number-of-stripe-units. And will then span all stripe-units in the same incrementing order wrapping back to the beginning of the device table. We call it a stripe-units moving window. Special consideration was taken to keep all devices in a mirror arrangement identical. So a broken osd-device could just be cloned from one of the mirrors and no FS scrubbing is needed. (We do that by rotating stripe-unit at a time and not a single device at a time.) TODO: We no longer verify object_length == inode->i_size in exofs_iget. (since i_size is stripped on multiple objects now). I should introduce a multiple-device attribute reading, and use it in exofs_iget. Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
2010-02-01 19:35:51 +08:00
size_attr->newsize = cpu_to_be64(obj_size);
size_attr->attr = g_attr_logical_length;
size_attr->attr.val_ptr = &size_attr->newsize;
ret = _truncate_mirrors(ios, i * ios->layout->mirrors_p1,
&size_attr->attr);
if (unlikely(ret))
goto out;
exofs: Move all operations to an io_engine In anticipation for multi-device operations, we separate osd operations into an abstract I/O API. Currently only one device is used but later when adding more devices, we will drive all devices in parallel according to a "data_map" that describes how data is arranged on multiple devices. The file system level operates, like before, as if there is one object (inode-number) and an i_size. The io engine will split this to the same object-number but on multiple device. At first we introduce Mirror (raid 1) layout. But at the final outcome we intend to fully implement the pNFS-Objects data-map, including raid 0,4,5,6 over mirrored devices, over multiple device-groups. And more. See: http://tools.ietf.org/html/draft-ietf-nfsv4-pnfs-obj-12 * Define an io_state based API for accessing osd storage devices in an abstract way. Usage: First a caller allocates an io state with: exofs_get_io_state(struct exofs_sb_info *sbi, struct exofs_io_state** ios); Then calles one of: exofs_sbi_create(struct exofs_io_state *ios); exofs_sbi_remove(struct exofs_io_state *ios); exofs_sbi_write(struct exofs_io_state *ios); exofs_sbi_read(struct exofs_io_state *ios); exofs_oi_truncate(struct exofs_i_info *oi, u64 new_len); And when done exofs_put_io_state(struct exofs_io_state *ios); * Convert all source files to use this new API * Convert from bio_alloc to bio_kmalloc * In io engine we make use of the now fixed osd_req_decode_sense There are no functional changes or on disk additions after this patch. Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
2009-11-08 20:54:08 +08:00
}
ret = exofs_io_execute(ios);
out:
exofs: RAID0 support We now support striping over mirror devices. Including variable sized stripe_unit. Some limits: * stripe_unit must be a multiple of PAGE_SIZE * stripe_unit * stripe_count is maximum upto 32-bit (4Gb) Tested RAID0 over mirrors, RAID0 only, mirrors only. All check. Design notes: * I'm not using a vectored raid-engine mechanism yet. Following the pnfs-objects-layout data-map structure, "Mirror" is just a private case of "group_width" == 1, and RAID0 is a private case of "Mirrors" == 1. The performance lose of the general case over the particular special case optimization is totally negligible, also considering the extra code size. * In general I added a prepare_stripes() stage that divides the to-be-io pages to the participating devices, the previous exofs_ios_write/read, now becomes _write/read_mirrors and a new write/read upper layer loops on all devices calling _write/read_mirrors. Effectively the prepare_stripes stage is the all secret. Also truncate need fixing to accommodate for striping. * In a RAID0 arrangement, in a regular usage scenario, if all inode layouts will start at the same device, the small files fill up the first device and the later devices stay empty, the farther the device the emptier it is. To fix that, each inode will start at a different stripe_unit, according to it's obj_id modulus number-of-stripe-units. And will then span all stripe-units in the same incrementing order wrapping back to the beginning of the device table. We call it a stripe-units moving window. Special consideration was taken to keep all devices in a mirror arrangement identical. So a broken osd-device could just be cloned from one of the mirrors and no FS scrubbing is needed. (We do that by rotating stripe-unit at a time and not a single device at a time.) TODO: We no longer verify object_length == inode->i_size in exofs_iget. (since i_size is stripped on multiple objects now). I should introduce a multiple-device attribute reading, and use it in exofs_iget. Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
2010-02-01 19:35:51 +08:00
kfree(size_attrs);
exofs: Move all operations to an io_engine In anticipation for multi-device operations, we separate osd operations into an abstract I/O API. Currently only one device is used but later when adding more devices, we will drive all devices in parallel according to a "data_map" that describes how data is arranged on multiple devices. The file system level operates, like before, as if there is one object (inode-number) and an i_size. The io engine will split this to the same object-number but on multiple device. At first we introduce Mirror (raid 1) layout. But at the final outcome we intend to fully implement the pNFS-Objects data-map, including raid 0,4,5,6 over mirrored devices, over multiple device-groups. And more. See: http://tools.ietf.org/html/draft-ietf-nfsv4-pnfs-obj-12 * Define an io_state based API for accessing osd storage devices in an abstract way. Usage: First a caller allocates an io state with: exofs_get_io_state(struct exofs_sb_info *sbi, struct exofs_io_state** ios); Then calles one of: exofs_sbi_create(struct exofs_io_state *ios); exofs_sbi_remove(struct exofs_io_state *ios); exofs_sbi_write(struct exofs_io_state *ios); exofs_sbi_read(struct exofs_io_state *ios); exofs_oi_truncate(struct exofs_i_info *oi, u64 new_len); And when done exofs_put_io_state(struct exofs_io_state *ios); * Convert all source files to use this new API * Convert from bio_alloc to bio_kmalloc * In io engine we make use of the now fixed osd_req_decode_sense There are no functional changes or on disk additions after this patch. Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
2009-11-08 20:54:08 +08:00
exofs_put_io_state(ios);
return ret;
}