UbiquitousOS
/
OpenCloudOS-Kernel
mirror of https://gitee.com/OpenCloudOS/OpenCloudOS-Kernel.git
11
0
Fork 0
Code Issues Projects Releases Wiki Activity
OpenCloudOS-Kernel/fs/ceph/dir.c

1264 lines
34 KiB
C
Raw Normal View History

ceph: factor out libceph from Ceph file system This factors out protocol and low-level storage parts of ceph into a separate libceph module living in net/ceph and include/linux/ceph. This is mostly a matter of moving files around. However, a few key pieces of the interface change as well: - ceph_client becomes ceph_fs_client and ceph_client, where the latter captures the mon and osd clients, and the fs_client gets the mds client and file system specific pieces. - Mount option parsing and debugfs setup is correspondingly broken into two pieces. - The mon client gets a generic handler callback for otherwise unknown messages (mds map, in this case). - The basic supported/required feature bits can be expanded (and are by ceph_fs_client). No functional change, aside from some subtle error handling cases that got cleaned up in the refactoring process. Signed-off-by: Sage Weil <sage@newdream.net>
2010-04-07 06:14:15 +08:00
#include <linux/ceph/ceph_debug.h>
ceph: directory operations Directory operations, including lookup, are defined here. We take advantage of lookup intents when possible. For the most part, we just need to build the proper requests for the metadata server(s) and pass things off to the mds_client. The results of most operations are normally incorporated into the client's cache when the reply is parsed by ceph_fill_trace(). However, if the MDS replies without a trace (e.g., when retrying an update after an MDS failure recovery), some operation-specific cleanup may be needed. We can validate cached dentries in two ways. A per-dentry lease may be issued by the MDS, or a per-directory cap may be issued that acts as a lease on the entire directory. In the latter case, a 'gen' value is used to determine which dentries belong to the currently leased directory contents. We normally prepopulate the dcache and icache with readdir results. This makes subsequent lookups and getattrs avoid any server interaction. It also lets us satisfy readdir operation by peeking at the dcache IFF we hold the per-directory cap/lease, previously performed a readdir, and haven't dropped any of the resulting dentries. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:08 +08:00
#include <linux/spinlock.h>
#include <linux/fs_struct.h>
#include <linux/namei.h>
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-24 16:04:11 +08:00
#include <linux/slab.h>
ceph: directory operations Directory operations, including lookup, are defined here. We take advantage of lookup intents when possible. For the most part, we just need to build the proper requests for the metadata server(s) and pass things off to the mds_client. The results of most operations are normally incorporated into the client's cache when the reply is parsed by ceph_fill_trace(). However, if the MDS replies without a trace (e.g., when retrying an update after an MDS failure recovery), some operation-specific cleanup may be needed. We can validate cached dentries in two ways. A per-dentry lease may be issued by the MDS, or a per-directory cap may be issued that acts as a lease on the entire directory. In the latter case, a 'gen' value is used to determine which dentries belong to the currently leased directory contents. We normally prepopulate the dcache and icache with readdir results. This makes subsequent lookups and getattrs avoid any server interaction. It also lets us satisfy readdir operation by peeking at the dcache IFF we hold the per-directory cap/lease, previously performed a readdir, and haven't dropped any of the resulting dentries. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:08 +08:00
#include <linux/sched.h>
#include "super.h"
ceph: factor out libceph from Ceph file system This factors out protocol and low-level storage parts of ceph into a separate libceph module living in net/ceph and include/linux/ceph. This is mostly a matter of moving files around. However, a few key pieces of the interface change as well: - ceph_client becomes ceph_fs_client and ceph_client, where the latter captures the mon and osd clients, and the fs_client gets the mds client and file system specific pieces. - Mount option parsing and debugfs setup is correspondingly broken into two pieces. - The mon client gets a generic handler callback for otherwise unknown messages (mds map, in this case). - The basic supported/required feature bits can be expanded (and are by ceph_fs_client). No functional change, aside from some subtle error handling cases that got cleaned up in the refactoring process. Signed-off-by: Sage Weil <sage@newdream.net>
2010-04-07 06:14:15 +08:00
#include "mds_client.h"
ceph: directory operations Directory operations, including lookup, are defined here. We take advantage of lookup intents when possible. For the most part, we just need to build the proper requests for the metadata server(s) and pass things off to the mds_client. The results of most operations are normally incorporated into the client's cache when the reply is parsed by ceph_fill_trace(). However, if the MDS replies without a trace (e.g., when retrying an update after an MDS failure recovery), some operation-specific cleanup may be needed. We can validate cached dentries in two ways. A per-dentry lease may be issued by the MDS, or a per-directory cap may be issued that acts as a lease on the entire directory. In the latter case, a 'gen' value is used to determine which dentries belong to the currently leased directory contents. We normally prepopulate the dcache and icache with readdir results. This makes subsequent lookups and getattrs avoid any server interaction. It also lets us satisfy readdir operation by peeking at the dcache IFF we hold the per-directory cap/lease, previously performed a readdir, and haven't dropped any of the resulting dentries. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:08 +08:00
/*
* Directory operations: readdir, lookup, create, link, unlink,
* rename, etc.
*/
/*
* Ceph MDS operations are specified in terms of a base ino and
* relative path. Thus, the client can specify an operation on a
* specific inode (e.g., a getattr due to fstat(2)), or as a path
* relative to, say, the root directory.
*
* Normally, we limit ourselves to strict inode ops (no path component)
* or dentry operations (a single path component relative to an ino). The
* exception to this is open_root_dentry(), which will open the mount
* point by name.
*/
const struct inode_operations ceph_dir_iops;
const struct file_operations ceph_dir_fops;
ceph: constify dentry_operations This makes checkpatch happy. Signed-off-by: Sage Weil <sage@newdream.net>
2010-08-04 01:25:30 +08:00
const struct dentry_operations ceph_dentry_ops;
ceph: directory operations Directory operations, including lookup, are defined here. We take advantage of lookup intents when possible. For the most part, we just need to build the proper requests for the metadata server(s) and pass things off to the mds_client. The results of most operations are normally incorporated into the client's cache when the reply is parsed by ceph_fill_trace(). However, if the MDS replies without a trace (e.g., when retrying an update after an MDS failure recovery), some operation-specific cleanup may be needed. We can validate cached dentries in two ways. A per-dentry lease may be issued by the MDS, or a per-directory cap may be issued that acts as a lease on the entire directory. In the latter case, a 'gen' value is used to determine which dentries belong to the currently leased directory contents. We normally prepopulate the dcache and icache with readdir results. This makes subsequent lookups and getattrs avoid any server interaction. It also lets us satisfy readdir operation by peeking at the dcache IFF we hold the per-directory cap/lease, previously performed a readdir, and haven't dropped any of the resulting dentries. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:08 +08:00
/*
* Initialize ceph dentry state.
*/
int ceph_init_dentry(struct dentry *dentry)
{
struct ceph_dentry_info *di;
if (dentry->d_fsdata)
return 0;
ceph: fix null pointer dereference in ceph_init_dentry for nfs reexport The fh_to_dentry etc. methods use ceph_init_dentry(), which assumes that d_parent is defined. It isn't for those callers, so check! Signed-off-by: Sage Weil <sage@newdream.net>
2010-12-18 01:53:41 +08:00
if (dentry->d_parent == NULL || /* nfs fh_to_dentry */
ceph_snap(dentry->d_parent->d_inode) == CEPH_NOSNAP)
ceph: directory operations Directory operations, including lookup, are defined here. We take advantage of lookup intents when possible. For the most part, we just need to build the proper requests for the metadata server(s) and pass things off to the mds_client. The results of most operations are normally incorporated into the client's cache when the reply is parsed by ceph_fill_trace(). However, if the MDS replies without a trace (e.g., when retrying an update after an MDS failure recovery), some operation-specific cleanup may be needed. We can validate cached dentries in two ways. A per-dentry lease may be issued by the MDS, or a per-directory cap may be issued that acts as a lease on the entire directory. In the latter case, a 'gen' value is used to determine which dentries belong to the currently leased directory contents. We normally prepopulate the dcache and icache with readdir results. This makes subsequent lookups and getattrs avoid any server interaction. It also lets us satisfy readdir operation by peeking at the dcache IFF we hold the per-directory cap/lease, previously performed a readdir, and haven't dropped any of the resulting dentries. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:08 +08:00
dentry->d_op = &ceph_dentry_ops;
else if (ceph_snap(dentry->d_parent->d_inode) == CEPH_SNAPDIR)
dentry->d_op = &ceph_snapdir_dentry_ops;
else
dentry->d_op = &ceph_snap_dentry_ops;
ceph: initialize fields on new dentry_infos Signed-off-by: Sage Weil <sage@newdream.net>
2010-08-25 07:23:48 +08:00
di = kmem_cache_alloc(ceph_dentry_cachep, GFP_NOFS | __GFP_ZERO);
ceph: directory operations Directory operations, including lookup, are defined here. We take advantage of lookup intents when possible. For the most part, we just need to build the proper requests for the metadata server(s) and pass things off to the mds_client. The results of most operations are normally incorporated into the client's cache when the reply is parsed by ceph_fill_trace(). However, if the MDS replies without a trace (e.g., when retrying an update after an MDS failure recovery), some operation-specific cleanup may be needed. We can validate cached dentries in two ways. A per-dentry lease may be issued by the MDS, or a per-directory cap may be issued that acts as a lease on the entire directory. In the latter case, a 'gen' value is used to determine which dentries belong to the currently leased directory contents. We normally prepopulate the dcache and icache with readdir results. This makes subsequent lookups and getattrs avoid any server interaction. It also lets us satisfy readdir operation by peeking at the dcache IFF we hold the per-directory cap/lease, previously performed a readdir, and haven't dropped any of the resulting dentries. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:08 +08:00
if (!di)
return -ENOMEM; /* oh well */
spin_lock(&dentry->d_lock);
ceph: fix memory leak due to possible dentry init race Free dentry_info in error path. Signed-off-by: Sage Weil <sage@newdream.net>
2010-04-24 02:36:54 +08:00
if (dentry->d_fsdata) {
/* lost a race */
kmem_cache_free(ceph_dentry_cachep, di);
ceph: directory operations Directory operations, including lookup, are defined here. We take advantage of lookup intents when possible. For the most part, we just need to build the proper requests for the metadata server(s) and pass things off to the mds_client. The results of most operations are normally incorporated into the client's cache when the reply is parsed by ceph_fill_trace(). However, if the MDS replies without a trace (e.g., when retrying an update after an MDS failure recovery), some operation-specific cleanup may be needed. We can validate cached dentries in two ways. A per-dentry lease may be issued by the MDS, or a per-directory cap may be issued that acts as a lease on the entire directory. In the latter case, a 'gen' value is used to determine which dentries belong to the currently leased directory contents. We normally prepopulate the dcache and icache with readdir results. This makes subsequent lookups and getattrs avoid any server interaction. It also lets us satisfy readdir operation by peeking at the dcache IFF we hold the per-directory cap/lease, previously performed a readdir, and haven't dropped any of the resulting dentries. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:08 +08:00
goto out_unlock;
ceph: fix memory leak due to possible dentry init race Free dentry_info in error path. Signed-off-by: Sage Weil <sage@newdream.net>
2010-04-24 02:36:54 +08:00
}
ceph: directory operations Directory operations, including lookup, are defined here. We take advantage of lookup intents when possible. For the most part, we just need to build the proper requests for the metadata server(s) and pass things off to the mds_client. The results of most operations are normally incorporated into the client's cache when the reply is parsed by ceph_fill_trace(). However, if the MDS replies without a trace (e.g., when retrying an update after an MDS failure recovery), some operation-specific cleanup may be needed. We can validate cached dentries in two ways. A per-dentry lease may be issued by the MDS, or a per-directory cap may be issued that acts as a lease on the entire directory. In the latter case, a 'gen' value is used to determine which dentries belong to the currently leased directory contents. We normally prepopulate the dcache and icache with readdir results. This makes subsequent lookups and getattrs avoid any server interaction. It also lets us satisfy readdir operation by peeking at the dcache IFF we hold the per-directory cap/lease, previously performed a readdir, and haven't dropped any of the resulting dentries. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:08 +08:00
di->dentry = dentry;
di->lease_session = NULL;
dentry->d_fsdata = di;
dentry->d_time = jiffies;
ceph_dentry_lru_add(dentry);
out_unlock:
spin_unlock(&dentry->d_lock);
return 0;
}
/*
* for readdir, we encode the directory frag and offset within that
* frag into f_pos.
*/
static unsigned fpos_frag(loff_t p)
{
return p >> 32;
}
static unsigned fpos_off(loff_t p)
{
return p & 0xffffffff;
}
/*
* When possible, we try to satisfy a readdir by peeking at the
* dcache. We make this work by carefully ordering dentries on
* d_u.d_child when we initially get results back from the MDS, and
* falling back to a "normal" sync readdir if any dentries in the dir
* are dropped.
*
* I_COMPLETE tells indicates we have all dentries in the dir. It is
* defined IFF we hold CEPH_CAP_FILE_SHARED (which will be revoked by
* the MDS if/when the directory is modified).
*/
static int __dcache_readdir(struct file *filp,
void *dirent, filldir_t filldir)
{
struct ceph_file_info *fi = filp->private_data;
struct dentry *parent = filp->f_dentry;
struct inode *dir = parent->d_inode;
struct list_head *p;
struct dentry *dentry, *last;
struct ceph_dentry_info *di;
int err = 0;
/* claim ref on last dentry we returned */
last = fi->dentry;
fi->dentry = NULL;
dout("__dcache_readdir %p at %llu (last %p)\n", dir, filp->f_pos,
last);
spin_lock(&dcache_lock);
/* start at beginning? */
ceph: avoid possible null deref in readdir after dir llseek last may be NULL, but we dereference it in the else branch without checking. Normally it doesn't trigger because last == NULL when fpos == 2, but it could happen on a newly opened dir if the user seeks forward. Reported-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Sage Weil <sage@newdream.net>
2010-11-23 14:58:06 +08:00
if (filp->f_pos == 2 || last == NULL ||
filp->f_pos < ceph_dentry(last)->offset) {
ceph: directory operations Directory operations, including lookup, are defined here. We take advantage of lookup intents when possible. For the most part, we just need to build the proper requests for the metadata server(s) and pass things off to the mds_client. The results of most operations are normally incorporated into the client's cache when the reply is parsed by ceph_fill_trace(). However, if the MDS replies without a trace (e.g., when retrying an update after an MDS failure recovery), some operation-specific cleanup may be needed. We can validate cached dentries in two ways. A per-dentry lease may be issued by the MDS, or a per-directory cap may be issued that acts as a lease on the entire directory. In the latter case, a 'gen' value is used to determine which dentries belong to the currently leased directory contents. We normally prepopulate the dcache and icache with readdir results. This makes subsequent lookups and getattrs avoid any server interaction. It also lets us satisfy readdir operation by peeking at the dcache IFF we hold the per-directory cap/lease, previously performed a readdir, and haven't dropped any of the resulting dentries. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:08 +08:00
if (list_empty(&parent->d_subdirs))
goto out_unlock;
p = parent->d_subdirs.prev;
dout(" initial p %p/%p\n", p->prev, p->next);
} else {
p = last->d_u.d_child.prev;
}
more:
dentry = list_entry(p, struct dentry, d_u.d_child);
di = ceph_dentry(dentry);
while (1) {
ceph: set dn offset when spliced We want to assign an offset when the dentry goes from null to linked, which is always done by splice_dentry(). Notably, we should NOT assign an offset when a dentry is first created and is still null. BUG if we try to splice a non-null dentry (we shouldn't). Signed-off-by: Sage Weil <sage@newdream.net>
2010-05-04 13:08:02 +08:00
dout(" p %p/%p %s d_subdirs %p/%p\n", p->prev, p->next,
d_unhashed(dentry) ? "!hashed" : "hashed",
ceph: directory operations Directory operations, including lookup, are defined here. We take advantage of lookup intents when possible. For the most part, we just need to build the proper requests for the metadata server(s) and pass things off to the mds_client. The results of most operations are normally incorporated into the client's cache when the reply is parsed by ceph_fill_trace(). However, if the MDS replies without a trace (e.g., when retrying an update after an MDS failure recovery), some operation-specific cleanup may be needed. We can validate cached dentries in two ways. A per-dentry lease may be issued by the MDS, or a per-directory cap may be issued that acts as a lease on the entire directory. In the latter case, a 'gen' value is used to determine which dentries belong to the currently leased directory contents. We normally prepopulate the dcache and icache with readdir results. This makes subsequent lookups and getattrs avoid any server interaction. It also lets us satisfy readdir operation by peeking at the dcache IFF we hold the per-directory cap/lease, previously performed a readdir, and haven't dropped any of the resulting dentries. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:08 +08:00
parent->d_subdirs.prev, parent->d_subdirs.next);
if (p == &parent->d_subdirs) {
fi->at_end = 1;
goto out_unlock;
}
fs: dcache scale d_unhashed Protect d_unhashed(dentry) condition with d_lock. This means keeping DCACHE_UNHASHED bit in synch with hash manipulations. Signed-off-by: Nick Piggin <npiggin@kernel.dk>
2011-01-07 14:49:33 +08:00
spin_lock(&dentry->d_lock);
ceph: directory operations Directory operations, including lookup, are defined here. We take advantage of lookup intents when possible. For the most part, we just need to build the proper requests for the metadata server(s) and pass things off to the mds_client. The results of most operations are normally incorporated into the client's cache when the reply is parsed by ceph_fill_trace(). However, if the MDS replies without a trace (e.g., when retrying an update after an MDS failure recovery), some operation-specific cleanup may be needed. We can validate cached dentries in two ways. A per-dentry lease may be issued by the MDS, or a per-directory cap may be issued that acts as a lease on the entire directory. In the latter case, a 'gen' value is used to determine which dentries belong to the currently leased directory contents. We normally prepopulate the dcache and icache with readdir results. This makes subsequent lookups and getattrs avoid any server interaction. It also lets us satisfy readdir operation by peeking at the dcache IFF we hold the per-directory cap/lease, previously performed a readdir, and haven't dropped any of the resulting dentries. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:08 +08:00
if (!d_unhashed(dentry) && dentry->d_inode &&
ceph: exclude snapdir from readdir results It was hidden from sync readdir, but not the cached dcache version. Signed-off-by: Sage Weil <sage@newdream.net>
2009-11-12 07:21:27 +08:00
ceph_snap(dentry->d_inode) != CEPH_SNAPDIR &&
ceph: hide /.ceph from readdir results We need to skip /.ceph in (cached) readdir results, and exclude "/.ceph" from the cached ENOENT lookup check. Signed-off-by: Sage Weil <sage@newdream.net>
2009-12-03 03:54:25 +08:00
ceph_ino(dentry->d_inode) != CEPH_INO_CEPH &&
ceph: directory operations Directory operations, including lookup, are defined here. We take advantage of lookup intents when possible. For the most part, we just need to build the proper requests for the metadata server(s) and pass things off to the mds_client. The results of most operations are normally incorporated into the client's cache when the reply is parsed by ceph_fill_trace(). However, if the MDS replies without a trace (e.g., when retrying an update after an MDS failure recovery), some operation-specific cleanup may be needed. We can validate cached dentries in two ways. A per-dentry lease may be issued by the MDS, or a per-directory cap may be issued that acts as a lease on the entire directory. In the latter case, a 'gen' value is used to determine which dentries belong to the currently leased directory contents. We normally prepopulate the dcache and icache with readdir results. This makes subsequent lookups and getattrs avoid any server interaction. It also lets us satisfy readdir operation by peeking at the dcache IFF we hold the per-directory cap/lease, previously performed a readdir, and haven't dropped any of the resulting dentries. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:08 +08:00
filp->f_pos <= di->offset)
break;
dout(" skipping %p %.*s at %llu (%llu)%s%s\n", dentry,
dentry->d_name.len, dentry->d_name.name, di->offset,
filp->f_pos, d_unhashed(dentry) ? " unhashed" : "",
!dentry->d_inode ? " null" : "");
fs: dcache scale d_unhashed Protect d_unhashed(dentry) condition with d_lock. This means keeping DCACHE_UNHASHED bit in synch with hash manipulations. Signed-off-by: Nick Piggin <npiggin@kernel.dk>
2011-01-07 14:49:33 +08:00
spin_unlock(&dentry->d_lock);
ceph: directory operations Directory operations, including lookup, are defined here. We take advantage of lookup intents when possible. For the most part, we just need to build the proper requests for the metadata server(s) and pass things off to the mds_client. The results of most operations are normally incorporated into the client's cache when the reply is parsed by ceph_fill_trace(). However, if the MDS replies without a trace (e.g., when retrying an update after an MDS failure recovery), some operation-specific cleanup may be needed. We can validate cached dentries in two ways. A per-dentry lease may be issued by the MDS, or a per-directory cap may be issued that acts as a lease on the entire directory. In the latter case, a 'gen' value is used to determine which dentries belong to the currently leased directory contents. We normally prepopulate the dcache and icache with readdir results. This makes subsequent lookups and getattrs avoid any server interaction. It also lets us satisfy readdir operation by peeking at the dcache IFF we hold the per-directory cap/lease, previously performed a readdir, and haven't dropped any of the resulting dentries. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:08 +08:00
p = p->prev;
dentry = list_entry(p, struct dentry, d_u.d_child);
di = ceph_dentry(dentry);
}
fs: dcache scale d_unhashed Protect d_unhashed(dentry) condition with d_lock. This means keeping DCACHE_UNHASHED bit in synch with hash manipulations. Signed-off-by: Nick Piggin <npiggin@kernel.dk>
2011-01-07 14:49:33 +08:00
dget_dlock(dentry);
fs: dcache scale dentry refcount Make d_count non-atomic and protect it with d_lock. This allows us to ensure a 0 refcount dentry remains 0 without dcache_lock. It is also fairly natural when we start protecting many other dentry members with d_lock. Signed-off-by: Nick Piggin <npiggin@kernel.dk>
2011-01-07 14:49:32 +08:00
spin_unlock(&dentry->d_lock);
ceph: directory operations Directory operations, including lookup, are defined here. We take advantage of lookup intents when possible. For the most part, we just need to build the proper requests for the metadata server(s) and pass things off to the mds_client. The results of most operations are normally incorporated into the client's cache when the reply is parsed by ceph_fill_trace(). However, if the MDS replies without a trace (e.g., when retrying an update after an MDS failure recovery), some operation-specific cleanup may be needed. We can validate cached dentries in two ways. A per-dentry lease may be issued by the MDS, or a per-directory cap may be issued that acts as a lease on the entire directory. In the latter case, a 'gen' value is used to determine which dentries belong to the currently leased directory contents. We normally prepopulate the dcache and icache with readdir results. This makes subsequent lookups and getattrs avoid any server interaction. It also lets us satisfy readdir operation by peeking at the dcache IFF we hold the per-directory cap/lease, previously performed a readdir, and haven't dropped any of the resulting dentries. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:08 +08:00
spin_unlock(&dcache_lock);
dout(" %llu (%llu) dentry %p %.*s %p\n", di->offset, filp->f_pos,
dentry, dentry->d_name.len, dentry->d_name.name, dentry->d_inode);
filp->f_pos = di->offset;
err = filldir(dirent, dentry->d_name.name,
dentry->d_name.len, di->offset,
dentry->d_inode->i_ino,
dentry->d_inode->i_mode >> 12);
if (last) {
if (err < 0) {
/* remember our position */
fi->dentry = last;
fi->next_offset = di->offset;
} else {
dput(last);
}
}
ceph: fix dentry reference leak in dcache readdir When filldir returned an error (e.g. buffer full for a large directory), we would leak a dentry reference, causing an oops on umount. Signed-off-by: Sage Weil <sage@newdream.net>
2010-04-13 05:24:28 +08:00
last = dentry;
ceph: directory operations Directory operations, including lookup, are defined here. We take advantage of lookup intents when possible. For the most part, we just need to build the proper requests for the metadata server(s) and pass things off to the mds_client. The results of most operations are normally incorporated into the client's cache when the reply is parsed by ceph_fill_trace(). However, if the MDS replies without a trace (e.g., when retrying an update after an MDS failure recovery), some operation-specific cleanup may be needed. We can validate cached dentries in two ways. A per-dentry lease may be issued by the MDS, or a per-directory cap may be issued that acts as a lease on the entire directory. In the latter case, a 'gen' value is used to determine which dentries belong to the currently leased directory contents. We normally prepopulate the dcache and icache with readdir results. This makes subsequent lookups and getattrs avoid any server interaction. It also lets us satisfy readdir operation by peeking at the dcache IFF we hold the per-directory cap/lease, previously performed a readdir, and haven't dropped any of the resulting dentries. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:08 +08:00
if (err < 0)
ceph: do not carry i_lock for readdir from dcache We were taking dcache_lock inside of i_lock, which introduces a dependency not found elsewhere in the kernel, complicationg the vfs locking scalability work. Since we don't actually need it here anyway, remove it. We only need i_lock to test for the I_COMPLETE flag, so be careful to do so without dcache_lock held. Signed-off-by: Sage Weil <sage@newdream.net>
2010-10-19 05:04:31 +08:00
goto out;
ceph: directory operations Directory operations, including lookup, are defined here. We take advantage of lookup intents when possible. For the most part, we just need to build the proper requests for the metadata server(s) and pass things off to the mds_client. The results of most operations are normally incorporated into the client's cache when the reply is parsed by ceph_fill_trace(). However, if the MDS replies without a trace (e.g., when retrying an update after an MDS failure recovery), some operation-specific cleanup may be needed. We can validate cached dentries in two ways. A per-dentry lease may be issued by the MDS, or a per-directory cap may be issued that acts as a lease on the entire directory. In the latter case, a 'gen' value is used to determine which dentries belong to the currently leased directory contents. We normally prepopulate the dcache and icache with readdir results. This makes subsequent lookups and getattrs avoid any server interaction. It also lets us satisfy readdir operation by peeking at the dcache IFF we hold the per-directory cap/lease, previously performed a readdir, and haven't dropped any of the resulting dentries. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:08 +08:00
filp->f_pos++;
/* make sure a dentry wasn't dropped while we didn't have dcache_lock */
ceph: do not carry i_lock for readdir from dcache We were taking dcache_lock inside of i_lock, which introduces a dependency not found elsewhere in the kernel, complicationg the vfs locking scalability work. Since we don't actually need it here anyway, remove it. We only need i_lock to test for the I_COMPLETE flag, so be careful to do so without dcache_lock held. Signed-off-by: Sage Weil <sage@newdream.net>
2010-10-19 05:04:31 +08:00
if (!ceph_i_test(dir, CEPH_I_COMPLETE)) {
dout(" lost I_COMPLETE on %p; falling back to mds\n", dir);
err = -EAGAIN;
goto out;
}
spin_lock(&dcache_lock);
p = p->prev; /* advance to next dentry */
goto more;
ceph: directory operations Directory operations, including lookup, are defined here. We take advantage of lookup intents when possible. For the most part, we just need to build the proper requests for the metadata server(s) and pass things off to the mds_client. The results of most operations are normally incorporated into the client's cache when the reply is parsed by ceph_fill_trace(). However, if the MDS replies without a trace (e.g., when retrying an update after an MDS failure recovery), some operation-specific cleanup may be needed. We can validate cached dentries in two ways. A per-dentry lease may be issued by the MDS, or a per-directory cap may be issued that acts as a lease on the entire directory. In the latter case, a 'gen' value is used to determine which dentries belong to the currently leased directory contents. We normally prepopulate the dcache and icache with readdir results. This makes subsequent lookups and getattrs avoid any server interaction. It also lets us satisfy readdir operation by peeking at the dcache IFF we hold the per-directory cap/lease, previously performed a readdir, and haven't dropped any of the resulting dentries. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:08 +08:00
out_unlock:
spin_unlock(&dcache_lock);
ceph: do not carry i_lock for readdir from dcache We were taking dcache_lock inside of i_lock, which introduces a dependency not found elsewhere in the kernel, complicationg the vfs locking scalability work. Since we don't actually need it here anyway, remove it. We only need i_lock to test for the I_COMPLETE flag, so be careful to do so without dcache_lock held. Signed-off-by: Sage Weil <sage@newdream.net>
2010-10-19 05:04:31 +08:00
out:
if (last)
ceph: directory operations Directory operations, including lookup, are defined here. We take advantage of lookup intents when possible. For the most part, we just need to build the proper requests for the metadata server(s) and pass things off to the mds_client. The results of most operations are normally incorporated into the client's cache when the reply is parsed by ceph_fill_trace(). However, if the MDS replies without a trace (e.g., when retrying an update after an MDS failure recovery), some operation-specific cleanup may be needed. We can validate cached dentries in two ways. A per-dentry lease may be issued by the MDS, or a per-directory cap may be issued that acts as a lease on the entire directory. In the latter case, a 'gen' value is used to determine which dentries belong to the currently leased directory contents. We normally prepopulate the dcache and icache with readdir results. This makes subsequent lookups and getattrs avoid any server interaction. It also lets us satisfy readdir operation by peeking at the dcache IFF we hold the per-directory cap/lease, previously performed a readdir, and haven't dropped any of the resulting dentries. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:08 +08:00
dput(last);
return err;
}
/*
* make note of the last dentry we read, so we can
* continue at the same lexicographical point,
* regardless of what dir changes take place on the
* server.
*/
static int note_last_dentry(struct ceph_file_info *fi, const char *name,
int len)
{
kfree(fi->last_name);
fi->last_name = kmalloc(len+1, GFP_NOFS);
if (!fi->last_name)
return -ENOMEM;
memcpy(fi->last_name, name, len);
fi->last_name[len] = 0;
dout("note_last_dentry '%s'\n", fi->last_name);
return 0;
}
static int ceph_readdir(struct file *filp, void *dirent, filldir_t filldir)
{
struct ceph_file_info *fi = filp->private_data;
struct inode *inode = filp->f_dentry->d_inode;
struct ceph_inode_info *ci = ceph_inode(inode);
ceph: factor out libceph from Ceph file system This factors out protocol and low-level storage parts of ceph into a separate libceph module living in net/ceph and include/linux/ceph. This is mostly a matter of moving files around. However, a few key pieces of the interface change as well: - ceph_client becomes ceph_fs_client and ceph_client, where the latter captures the mon and osd clients, and the fs_client gets the mds client and file system specific pieces. - Mount option parsing and debugfs setup is correspondingly broken into two pieces. - The mon client gets a generic handler callback for otherwise unknown messages (mds map, in this case). - The basic supported/required feature bits can be expanded (and are by ceph_fs_client). No functional change, aside from some subtle error handling cases that got cleaned up in the refactoring process. Signed-off-by: Sage Weil <sage@newdream.net>
2010-04-07 06:14:15 +08:00
struct ceph_fs_client *fsc = ceph_inode_to_client(inode);
struct ceph_mds_client *mdsc = fsc->mdsc;
ceph: directory operations Directory operations, including lookup, are defined here. We take advantage of lookup intents when possible. For the most part, we just need to build the proper requests for the metadata server(s) and pass things off to the mds_client. The results of most operations are normally incorporated into the client's cache when the reply is parsed by ceph_fill_trace(). However, if the MDS replies without a trace (e.g., when retrying an update after an MDS failure recovery), some operation-specific cleanup may be needed. We can validate cached dentries in two ways. A per-dentry lease may be issued by the MDS, or a per-directory cap may be issued that acts as a lease on the entire directory. In the latter case, a 'gen' value is used to determine which dentries belong to the currently leased directory contents. We normally prepopulate the dcache and icache with readdir results. This makes subsequent lookups and getattrs avoid any server interaction. It also lets us satisfy readdir operation by peeking at the dcache IFF we hold the per-directory cap/lease, previously performed a readdir, and haven't dropped any of the resulting dentries. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:08 +08:00
unsigned frag = fpos_frag(filp->f_pos);
int off = fpos_off(filp->f_pos);
int err;
u32 ftype;
struct ceph_mds_reply_info_parsed *rinfo;
ceph: factor out libceph from Ceph file system This factors out protocol and low-level storage parts of ceph into a separate libceph module living in net/ceph and include/linux/ceph. This is mostly a matter of moving files around. However, a few key pieces of the interface change as well: - ceph_client becomes ceph_fs_client and ceph_client, where the latter captures the mon and osd clients, and the fs_client gets the mds client and file system specific pieces. - Mount option parsing and debugfs setup is correspondingly broken into two pieces. - The mon client gets a generic handler callback for otherwise unknown messages (mds map, in this case). - The basic supported/required feature bits can be expanded (and are by ceph_fs_client). No functional change, aside from some subtle error handling cases that got cleaned up in the refactoring process. Signed-off-by: Sage Weil <sage@newdream.net>
2010-04-07 06:14:15 +08:00
const int max_entries = fsc->mount_options->max_readdir;
const int max_bytes = fsc->mount_options->max_readdir_bytes;
ceph: directory operations Directory operations, including lookup, are defined here. We take advantage of lookup intents when possible. For the most part, we just need to build the proper requests for the metadata server(s) and pass things off to the mds_client. The results of most operations are normally incorporated into the client's cache when the reply is parsed by ceph_fill_trace(). However, if the MDS replies without a trace (e.g., when retrying an update after an MDS failure recovery), some operation-specific cleanup may be needed. We can validate cached dentries in two ways. A per-dentry lease may be issued by the MDS, or a per-directory cap may be issued that acts as a lease on the entire directory. In the latter case, a 'gen' value is used to determine which dentries belong to the currently leased directory contents. We normally prepopulate the dcache and icache with readdir results. This makes subsequent lookups and getattrs avoid any server interaction. It also lets us satisfy readdir operation by peeking at the dcache IFF we hold the per-directory cap/lease, previously performed a readdir, and haven't dropped any of the resulting dentries. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:08 +08:00
dout("readdir %p filp %p frag %u off %u\n", inode, filp, frag, off);
if (fi->at_end)
return 0;
/* always start with . and .. */
if (filp->f_pos == 0) {
/* note dir version at start of readdir so we can tell
* if any dentries get dropped */
fi->dir_release_count = ci->i_release_count;
dout("readdir off 0 -> '.'\n");
if (filldir(dirent, ".", 1, ceph_make_fpos(0, 0),
inode->i_ino, inode->i_mode >> 12) < 0)
return 0;
filp->f_pos = 1;
off = 1;
}
if (filp->f_pos == 1) {
dout("readdir off 1 -> '..'\n");
if (filldir(dirent, "..", 2, ceph_make_fpos(0, 1),
filp->f_dentry->d_parent->d_inode->i_ino,
inode->i_mode >> 12) < 0)
return 0;
filp->f_pos = 2;
off = 2;
}
/* can we use the dcache? */
spin_lock(&inode->i_lock);
if ((filp->f_pos == 2 || fi->dentry) &&
ceph: factor out libceph from Ceph file system This factors out protocol and low-level storage parts of ceph into a separate libceph module living in net/ceph and include/linux/ceph. This is mostly a matter of moving files around. However, a few key pieces of the interface change as well: - ceph_client becomes ceph_fs_client and ceph_client, where the latter captures the mon and osd clients, and the fs_client gets the mds client and file system specific pieces. - Mount option parsing and debugfs setup is correspondingly broken into two pieces. - The mon client gets a generic handler callback for otherwise unknown messages (mds map, in this case). - The basic supported/required feature bits can be expanded (and are by ceph_fs_client). No functional change, aside from some subtle error handling cases that got cleaned up in the refactoring process. Signed-off-by: Sage Weil <sage@newdream.net>
2010-04-07 06:14:15 +08:00
!ceph_test_mount_opt(fsc, NOASYNCREADDIR) &&
ceph: avoid dcache readdir for snapdir We should always go to the MDS for readdir on the hidden snapdir. The set of snapshots can change at any time; the client can't trust its cache for that. Signed-off-by: Sage Weil <sage@newdream.net>
2010-07-23 04:47:21 +08:00
ceph_snap(inode) != CEPH_SNAPDIR &&
ceph: directory operations Directory operations, including lookup, are defined here. We take advantage of lookup intents when possible. For the most part, we just need to build the proper requests for the metadata server(s) and pass things off to the mds_client. The results of most operations are normally incorporated into the client's cache when the reply is parsed by ceph_fill_trace(). However, if the MDS replies without a trace (e.g., when retrying an update after an MDS failure recovery), some operation-specific cleanup may be needed. We can validate cached dentries in two ways. A per-dentry lease may be issued by the MDS, or a per-directory cap may be issued that acts as a lease on the entire directory. In the latter case, a 'gen' value is used to determine which dentries belong to the currently leased directory contents. We normally prepopulate the dcache and icache with readdir results. This makes subsequent lookups and getattrs avoid any server interaction. It also lets us satisfy readdir operation by peeking at the dcache IFF we hold the per-directory cap/lease, previously performed a readdir, and haven't dropped any of the resulting dentries. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:08 +08:00
(ci->i_ceph_flags & CEPH_I_COMPLETE) &&
__ceph_caps_issued_mask(ci, CEPH_CAP_FILE_SHARED, 1)) {
ceph: do not carry i_lock for readdir from dcache We were taking dcache_lock inside of i_lock, which introduces a dependency not found elsewhere in the kernel, complicationg the vfs locking scalability work. Since we don't actually need it here anyway, remove it. We only need i_lock to test for the I_COMPLETE flag, so be careful to do so without dcache_lock held. Signed-off-by: Sage Weil <sage@newdream.net>
2010-10-19 05:04:31 +08:00
spin_unlock(&inode->i_lock);
ceph: directory operations Directory operations, including lookup, are defined here. We take advantage of lookup intents when possible. For the most part, we just need to build the proper requests for the metadata server(s) and pass things off to the mds_client. The results of most operations are normally incorporated into the client's cache when the reply is parsed by ceph_fill_trace(). However, if the MDS replies without a trace (e.g., when retrying an update after an MDS failure recovery), some operation-specific cleanup may be needed. We can validate cached dentries in two ways. A per-dentry lease may be issued by the MDS, or a per-directory cap may be issued that acts as a lease on the entire directory. In the latter case, a 'gen' value is used to determine which dentries belong to the currently leased directory contents. We normally prepopulate the dcache and icache with readdir results. This makes subsequent lookups and getattrs avoid any server interaction. It also lets us satisfy readdir operation by peeking at the dcache IFF we hold the per-directory cap/lease, previously performed a readdir, and haven't dropped any of the resulting dentries. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:08 +08:00
err = __dcache_readdir(filp, dirent, filldir);
ceph: do not carry i_lock for readdir from dcache We were taking dcache_lock inside of i_lock, which introduces a dependency not found elsewhere in the kernel, complicationg the vfs locking scalability work. Since we don't actually need it here anyway, remove it. We only need i_lock to test for the I_COMPLETE flag, so be careful to do so without dcache_lock held. Signed-off-by: Sage Weil <sage@newdream.net>
2010-10-19 05:04:31 +08:00
if (err != -EAGAIN)
ceph: directory operations Directory operations, including lookup, are defined here. We take advantage of lookup intents when possible. For the most part, we just need to build the proper requests for the metadata server(s) and pass things off to the mds_client. The results of most operations are normally incorporated into the client's cache when the reply is parsed by ceph_fill_trace(). However, if the MDS replies without a trace (e.g., when retrying an update after an MDS failure recovery), some operation-specific cleanup may be needed. We can validate cached dentries in two ways. A per-dentry lease may be issued by the MDS, or a per-directory cap may be issued that acts as a lease on the entire directory. In the latter case, a 'gen' value is used to determine which dentries belong to the currently leased directory contents. We normally prepopulate the dcache and icache with readdir results. This makes subsequent lookups and getattrs avoid any server interaction. It also lets us satisfy readdir operation by peeking at the dcache IFF we hold the per-directory cap/lease, previously performed a readdir, and haven't dropped any of the resulting dentries. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:08 +08:00
return err;
ceph: do not carry i_lock for readdir from dcache We were taking dcache_lock inside of i_lock, which introduces a dependency not found elsewhere in the kernel, complicationg the vfs locking scalability work. Since we don't actually need it here anyway, remove it. We only need i_lock to test for the I_COMPLETE flag, so be careful to do so without dcache_lock held. Signed-off-by: Sage Weil <sage@newdream.net>
2010-10-19 05:04:31 +08:00
} else {
spin_unlock(&inode->i_lock);
ceph: directory operations Directory operations, including lookup, are defined here. We take advantage of lookup intents when possible. For the most part, we just need to build the proper requests for the metadata server(s) and pass things off to the mds_client. The results of most operations are normally incorporated into the client's cache when the reply is parsed by ceph_fill_trace(). However, if the MDS replies without a trace (e.g., when retrying an update after an MDS failure recovery), some operation-specific cleanup may be needed. We can validate cached dentries in two ways. A per-dentry lease may be issued by the MDS, or a per-directory cap may be issued that acts as a lease on the entire directory. In the latter case, a 'gen' value is used to determine which dentries belong to the currently leased directory contents. We normally prepopulate the dcache and icache with readdir results. This makes subsequent lookups and getattrs avoid any server interaction. It also lets us satisfy readdir operation by peeking at the dcache IFF we hold the per-directory cap/lease, previously performed a readdir, and haven't dropped any of the resulting dentries. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:08 +08:00
}
if (fi->dentry) {
err = note_last_dentry(fi, fi->dentry->d_name.name,
fi->dentry->d_name.len);
if (err)
return err;
dput(fi->dentry);
fi->dentry = NULL;
}
/* proceed with a normal readdir */
more:
/* do we have the correct frag content buffered? */
if (fi->frag != frag || fi->last_readdir == NULL) {
struct ceph_mds_request *req;
int op = ceph_snap(inode) == CEPH_SNAPDIR ?
CEPH_MDS_OP_LSSNAP : CEPH_MDS_OP_READDIR;
/* discard old result, if any */
ceph: fix possible double-free of mds request reference Clear pointer to mds request after dropping the reference to ensure we don't drop it again, as there is at least one error path through this function that does not reset fi->last_readdir to a new value. Signed-off-by: Sage Weil <sage@newdream.net>
2010-03-11 04:03:32 +08:00
if (fi->last_readdir) {
ceph: directory operations Directory operations, including lookup, are defined here. We take advantage of lookup intents when possible. For the most part, we just need to build the proper requests for the metadata server(s) and pass things off to the mds_client. The results of most operations are normally incorporated into the client's cache when the reply is parsed by ceph_fill_trace(). However, if the MDS replies without a trace (e.g., when retrying an update after an MDS failure recovery), some operation-specific cleanup may be needed. We can validate cached dentries in two ways. A per-dentry lease may be issued by the MDS, or a per-directory cap may be issued that acts as a lease on the entire directory. In the latter case, a 'gen' value is used to determine which dentries belong to the currently leased directory contents. We normally prepopulate the dcache and icache with readdir results. This makes subsequent lookups and getattrs avoid any server interaction. It also lets us satisfy readdir operation by peeking at the dcache IFF we hold the per-directory cap/lease, previously performed a readdir, and haven't dropped any of the resulting dentries. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:08 +08:00
ceph_mdsc_put_request(fi->last_readdir);
ceph: fix possible double-free of mds request reference Clear pointer to mds request after dropping the reference to ensure we don't drop it again, as there is at least one error path through this function that does not reset fi->last_readdir to a new value. Signed-off-by: Sage Weil <sage@newdream.net>
2010-03-11 04:03:32 +08:00
fi->last_readdir = NULL;
}
ceph: directory operations Directory operations, including lookup, are defined here. We take advantage of lookup intents when possible. For the most part, we just need to build the proper requests for the metadata server(s) and pass things off to the mds_client. The results of most operations are normally incorporated into the client's cache when the reply is parsed by ceph_fill_trace(). However, if the MDS replies without a trace (e.g., when retrying an update after an MDS failure recovery), some operation-specific cleanup may be needed. We can validate cached dentries in two ways. A per-dentry lease may be issued by the MDS, or a per-directory cap may be issued that acts as a lease on the entire directory. In the latter case, a 'gen' value is used to determine which dentries belong to the currently leased directory contents. We normally prepopulate the dcache and icache with readdir results. This makes subsequent lookups and getattrs avoid any server interaction. It also lets us satisfy readdir operation by peeking at the dcache IFF we hold the per-directory cap/lease, previously performed a readdir, and haven't dropped any of the resulting dentries. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:08 +08:00
/* requery frag tree, as the frag topology may have changed */
frag = ceph_choose_frag(ceph_inode(inode), frag, NULL, NULL);
dout("readdir fetching %llx.%llx frag %x offset '%s'\n",
ceph_vinop(inode), frag, fi->last_name);
req = ceph_mdsc_create_request(mdsc, op, USE_AUTH_MDS);
if (IS_ERR(req))
return PTR_ERR(req);
req->r_inode = igrab(inode);
req->r_dentry = dget(filp->f_dentry);
/* hints to request -> mds selection code */
req->r_direct_mode = USE_AUTH_MDS;
req->r_direct_hash = ceph_frag_value(frag);
req->r_direct_is_hash = true;
req->r_path2 = kstrdup(fi->last_name, GFP_NOFS);
req->r_readdir_offset = fi->next_offset;
req->r_args.readdir.frag = cpu_to_le32(frag);
req->r_args.readdir.max_entries = cpu_to_le32(max_entries);
ceph: specify max_bytes on readdir replies Specify max bytes in request to bound size of reply. Add associated mount option with default value of 512 KB. Signed-off-by: Sage Weil <sage@newdream.net>
2010-05-15 04:06:30 +08:00
req->r_args.readdir.max_bytes = cpu_to_le32(max_bytes);
ceph: reserve one more caps space when doing readdir We were missing space for the directory cap. The result was a BUG at fs/ceph/caps.c:2178. Signed-off-by: Yehuda Sadeh <yehuda@hq.newdream.net> Signed-off-by: Sage Weil <sage@newdream.net>
2010-04-14 02:45:56 +08:00
req->r_num_caps = max_entries + 1;
ceph: directory operations Directory operations, including lookup, are defined here. We take advantage of lookup intents when possible. For the most part, we just need to build the proper requests for the metadata server(s) and pass things off to the mds_client. The results of most operations are normally incorporated into the client's cache when the reply is parsed by ceph_fill_trace(). However, if the MDS replies without a trace (e.g., when retrying an update after an MDS failure recovery), some operation-specific cleanup may be needed. We can validate cached dentries in two ways. A per-dentry lease may be issued by the MDS, or a per-directory cap may be issued that acts as a lease on the entire directory. In the latter case, a 'gen' value is used to determine which dentries belong to the currently leased directory contents. We normally prepopulate the dcache and icache with readdir results. This makes subsequent lookups and getattrs avoid any server interaction. It also lets us satisfy readdir operation by peeking at the dcache IFF we hold the per-directory cap/lease, previously performed a readdir, and haven't dropped any of the resulting dentries. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:08 +08:00
err = ceph_mdsc_do_request(mdsc, NULL, req);
if (err < 0) {
ceph_mdsc_put_request(req);
return err;
}
dout("readdir got and parsed readdir result=%d"
" on frag %x, end=%d, complete=%d\n", err, frag,
(int)req->r_reply_info.dir_end,
(int)req->r_reply_info.dir_complete);
if (!req->r_did_prepopulate) {
dout("readdir !did_prepopulate");
fi->dir_release_count--; /* preclude I_COMPLETE */
}
/* note next offset and last dentry name */
fi->offset = fi->next_offset;
fi->last_readdir = req;
if (req->r_reply_info.dir_end) {
kfree(fi->last_name);
fi->last_name = NULL;
ceph: fix frag offset for non-leftmost frags We start at offset 2 for the leftmost frag, and 0 for subsequent frags. When we reach the end (rightmost), we go back to 2. This fixes readdir on fragmented (large) directories. Signed-off-by: Sage Weil <sage@newdream.net>
2010-11-12 08:48:59 +08:00
if (ceph_frag_is_rightmost(frag))
fi->next_offset = 2;
else
fi->next_offset = 0;
ceph: directory operations Directory operations, including lookup, are defined here. We take advantage of lookup intents when possible. For the most part, we just need to build the proper requests for the metadata server(s) and pass things off to the mds_client. The results of most operations are normally incorporated into the client's cache when the reply is parsed by ceph_fill_trace(). However, if the MDS replies without a trace (e.g., when retrying an update after an MDS failure recovery), some operation-specific cleanup may be needed. We can validate cached dentries in two ways. A per-dentry lease may be issued by the MDS, or a per-directory cap may be issued that acts as a lease on the entire directory. In the latter case, a 'gen' value is used to determine which dentries belong to the currently leased directory contents. We normally prepopulate the dcache and icache with readdir results. This makes subsequent lookups and getattrs avoid any server interaction. It also lets us satisfy readdir operation by peeking at the dcache IFF we hold the per-directory cap/lease, previously performed a readdir, and haven't dropped any of the resulting dentries. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:08 +08:00
} else {
rinfo = &req->r_reply_info;
err = note_last_dentry(fi,
rinfo->dir_dname[rinfo->dir_nr-1],
rinfo->dir_dname_len[rinfo->dir_nr-1]);
if (err)
return err;
fi->next_offset += rinfo->dir_nr;
}
}
rinfo = &fi->last_readdir->r_reply_info;
dout("readdir frag %x num %d off %d chunkoff %d\n", frag,
rinfo->dir_nr, off, fi->offset);
while (off - fi->offset >= 0 && off - fi->offset < rinfo->dir_nr) {
u64 pos = ceph_make_fpos(frag, off);
struct ceph_mds_reply_inode *in =
rinfo->dir_in[off - fi->offset].in;
ceph: fix readdir EOVERFLOW on 32-bit archs One of the readdir filldir_t callers was passing the raw ceph 64-bit ino instead of the hashed 32-bit one, producing an EOVERFLOW in the filler callback. Fix this by calling the ceph_vino_to_ino() helper to do the conversion. Reported-by: Jan Smets <jan.smets@alcatel-lucent.com> Tested-by: Jan Smets <jan.smets@alcatel-lucent.com> Signed-off-by: Sage Weil <sage@newdream.net>
2010-11-19 01:15:07 +08:00
struct ceph_vino vino;
ino_t ino;
ceph: directory operations Directory operations, including lookup, are defined here. We take advantage of lookup intents when possible. For the most part, we just need to build the proper requests for the metadata server(s) and pass things off to the mds_client. The results of most operations are normally incorporated into the client's cache when the reply is parsed by ceph_fill_trace(). However, if the MDS replies without a trace (e.g., when retrying an update after an MDS failure recovery), some operation-specific cleanup may be needed. We can validate cached dentries in two ways. A per-dentry lease may be issued by the MDS, or a per-directory cap may be issued that acts as a lease on the entire directory. In the latter case, a 'gen' value is used to determine which dentries belong to the currently leased directory contents. We normally prepopulate the dcache and icache with readdir results. This makes subsequent lookups and getattrs avoid any server interaction. It also lets us satisfy readdir operation by peeking at the dcache IFF we hold the per-directory cap/lease, previously performed a readdir, and haven't dropped any of the resulting dentries. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:08 +08:00
dout("readdir off %d (%d/%d) -> %lld '%.*s' %p\n",
off, off - fi->offset, rinfo->dir_nr, pos,
rinfo->dir_dname_len[off - fi->offset],
rinfo->dir_dname[off - fi->offset], in);
BUG_ON(!in);
ftype = le32_to_cpu(in->mode) >> 12;
ceph: fix readdir EOVERFLOW on 32-bit archs One of the readdir filldir_t callers was passing the raw ceph 64-bit ino instead of the hashed 32-bit one, producing an EOVERFLOW in the filler callback. Fix this by calling the ceph_vino_to_ino() helper to do the conversion. Reported-by: Jan Smets <jan.smets@alcatel-lucent.com> Tested-by: Jan Smets <jan.smets@alcatel-lucent.com> Signed-off-by: Sage Weil <sage@newdream.net>
2010-11-19 01:15:07 +08:00
vino.ino = le64_to_cpu(in->ino);
vino.snap = le64_to_cpu(in->snapid);
ino = ceph_vino_to_ino(vino);
ceph: directory operations Directory operations, including lookup, are defined here. We take advantage of lookup intents when possible. For the most part, we just need to build the proper requests for the metadata server(s) and pass things off to the mds_client. The results of most operations are normally incorporated into the client's cache when the reply is parsed by ceph_fill_trace(). However, if the MDS replies without a trace (e.g., when retrying an update after an MDS failure recovery), some operation-specific cleanup may be needed. We can validate cached dentries in two ways. A per-dentry lease may be issued by the MDS, or a per-directory cap may be issued that acts as a lease on the entire directory. In the latter case, a 'gen' value is used to determine which dentries belong to the currently leased directory contents. We normally prepopulate the dcache and icache with readdir results. This makes subsequent lookups and getattrs avoid any server interaction. It also lets us satisfy readdir operation by peeking at the dcache IFF we hold the per-directory cap/lease, previously performed a readdir, and haven't dropped any of the resulting dentries. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:08 +08:00
if (filldir(dirent,
rinfo->dir_dname[off - fi->offset],
rinfo->dir_dname_len[off - fi->offset],
ceph: fix readdir EOVERFLOW on 32-bit archs One of the readdir filldir_t callers was passing the raw ceph 64-bit ino instead of the hashed 32-bit one, producing an EOVERFLOW in the filler callback. Fix this by calling the ceph_vino_to_ino() helper to do the conversion. Reported-by: Jan Smets <jan.smets@alcatel-lucent.com> Tested-by: Jan Smets <jan.smets@alcatel-lucent.com> Signed-off-by: Sage Weil <sage@newdream.net>
2010-11-19 01:15:07 +08:00
pos, ino, ftype) < 0) {
ceph: directory operations Directory operations, including lookup, are defined here. We take advantage of lookup intents when possible. For the most part, we just need to build the proper requests for the metadata server(s) and pass things off to the mds_client. The results of most operations are normally incorporated into the client's cache when the reply is parsed by ceph_fill_trace(). However, if the MDS replies without a trace (e.g., when retrying an update after an MDS failure recovery), some operation-specific cleanup may be needed. We can validate cached dentries in two ways. A per-dentry lease may be issued by the MDS, or a per-directory cap may be issued that acts as a lease on the entire directory. In the latter case, a 'gen' value is used to determine which dentries belong to the currently leased directory contents. We normally prepopulate the dcache and icache with readdir results. This makes subsequent lookups and getattrs avoid any server interaction. It also lets us satisfy readdir operation by peeking at the dcache IFF we hold the per-directory cap/lease, previously performed a readdir, and haven't dropped any of the resulting dentries. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:08 +08:00
dout("filldir stopping us...\n");
return 0;
}
off++;
filp->f_pos = pos + 1;
}
if (fi->last_name) {
ceph_mdsc_put_request(fi->last_readdir);
fi->last_readdir = NULL;
goto more;
}
/* more frags? */
if (!ceph_frag_is_rightmost(frag)) {
frag = ceph_frag_next(frag);
off = 0;
filp->f_pos = ceph_make_fpos(frag, off);
dout("readdir next frag is %x\n", frag);
goto more;
}
fi->at_end = 1;
/*
* if dir_release_count still matches the dir, no dentries
* were released during the whole readdir, and we should have
* the complete dir contents in our cache.
*/
spin_lock(&inode->i_lock);
if (ci->i_release_count == fi->dir_release_count) {
dout(" marking %p complete\n", inode);
ci->i_ceph_flags |= CEPH_I_COMPLETE;
ci->i_max_offset = filp->f_pos;
}
spin_unlock(&inode->i_lock);
dout("readdir %p filp %p done.\n", inode, filp);
return 0;
}
static void reset_readdir(struct ceph_file_info *fi)
{
if (fi->last_readdir) {
ceph_mdsc_put_request(fi->last_readdir);
fi->last_readdir = NULL;
}
kfree(fi->last_name);
ceph: fix dangling pointer Clear fi->last_name when it's freed. The only caller is rewinddir() (or equivalent lseek). Signed-off-by: Sage Weil <sage@newdream.net>
2010-11-12 07:24:06 +08:00
fi->last_name = NULL;
ceph: directory operations Directory operations, including lookup, are defined here. We take advantage of lookup intents when possible. For the most part, we just need to build the proper requests for the metadata server(s) and pass things off to the mds_client. The results of most operations are normally incorporated into the client's cache when the reply is parsed by ceph_fill_trace(). However, if the MDS replies without a trace (e.g., when retrying an update after an MDS failure recovery), some operation-specific cleanup may be needed. We can validate cached dentries in two ways. A per-dentry lease may be issued by the MDS, or a per-directory cap may be issued that acts as a lease on the entire directory. In the latter case, a 'gen' value is used to determine which dentries belong to the currently leased directory contents. We normally prepopulate the dcache and icache with readdir results. This makes subsequent lookups and getattrs avoid any server interaction. It also lets us satisfy readdir operation by peeking at the dcache IFF we hold the per-directory cap/lease, previously performed a readdir, and haven't dropped any of the resulting dentries. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:08 +08:00
fi->next_offset = 2; /* compensate for . and .. */
if (fi->dentry) {
dput(fi->dentry);
fi->dentry = NULL;
}
fi->at_end = 0;
}
static loff_t ceph_dir_llseek(struct file *file, loff_t offset, int origin)
{
struct ceph_file_info *fi = file->private_data;
struct inode *inode = file->f_mapping->host;
loff_t old_offset = offset;
loff_t retval;
mutex_lock(&inode->i_mutex);
switch (origin) {
case SEEK_END:
offset += inode->i_size + 2; /* FIXME */
break;
case SEEK_CUR:
offset += file->f_pos;
}
retval = -EINVAL;
if (offset >= 0 && offset <= inode->i_sb->s_maxbytes) {
if (offset != file->f_pos) {
file->f_pos = offset;
file->f_version = 0;
fi->at_end = 0;
}
retval = offset;
/*
* discard buffered readdir content on seekdir(0), or
* seek to new frag, or seek prior to current chunk.
*/
if (offset == 0 ||
fpos_frag(offset) != fpos_frag(old_offset) ||
fpos_off(offset) < fi->offset) {
dout("dir_llseek dropping %p content\n", file);
reset_readdir(fi);
}
/* bump dir_release_count if we did a forward seek */
if (offset > old_offset)
fi->dir_release_count--;
}
mutex_unlock(&inode->i_mutex);
return retval;
}
/*
* Process result of a lookup/open request.
*
* Mainly, make sure we return the final req->r_dentry (if it already
* existed) in place of the original VFS-provided dentry when they
* differ.
*
* Gracefully handle the case where the MDS replies with -ENOENT and
* no trace (which it may do, at its discretion, e.g., if it doesn't
* care to issue a lease on the negative dentry).
*/
struct dentry *ceph_finish_lookup(struct ceph_mds_request *req,
struct dentry *dentry, int err)
{
ceph: factor out libceph from Ceph file system This factors out protocol and low-level storage parts of ceph into a separate libceph module living in net/ceph and include/linux/ceph. This is mostly a matter of moving files around. However, a few key pieces of the interface change as well: - ceph_client becomes ceph_fs_client and ceph_client, where the latter captures the mon and osd clients, and the fs_client gets the mds client and file system specific pieces. - Mount option parsing and debugfs setup is correspondingly broken into two pieces. - The mon client gets a generic handler callback for otherwise unknown messages (mds map, in this case). - The basic supported/required feature bits can be expanded (and are by ceph_fs_client). No functional change, aside from some subtle error handling cases that got cleaned up in the refactoring process. Signed-off-by: Sage Weil <sage@newdream.net>
2010-04-07 06:14:15 +08:00
struct ceph_fs_client *fsc = ceph_sb_to_client(dentry->d_sb);
ceph: directory operations Directory operations, including lookup, are defined here. We take advantage of lookup intents when possible. For the most part, we just need to build the proper requests for the metadata server(s) and pass things off to the mds_client. The results of most operations are normally incorporated into the client's cache when the reply is parsed by ceph_fill_trace(). However, if the MDS replies without a trace (e.g., when retrying an update after an MDS failure recovery), some operation-specific cleanup may be needed. We can validate cached dentries in two ways. A per-dentry lease may be issued by the MDS, or a per-directory cap may be issued that acts as a lease on the entire directory. In the latter case, a 'gen' value is used to determine which dentries belong to the currently leased directory contents. We normally prepopulate the dcache and icache with readdir results. This makes subsequent lookups and getattrs avoid any server interaction. It also lets us satisfy readdir operation by peeking at the dcache IFF we hold the per-directory cap/lease, previously performed a readdir, and haven't dropped any of the resulting dentries. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:08 +08:00
struct inode *parent = dentry->d_parent->d_inode;
/* .snap dir? */
if (err == -ENOENT &&
ceph: allocate and parse mount args before client instance This simplifies much of the error handling during mount. It also means that we have the mount args before client creation, and we can initialize based on those options. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-28 02:50:50 +08:00
strcmp(dentry->d_name.name,
ceph: factor out libceph from Ceph file system This factors out protocol and low-level storage parts of ceph into a separate libceph module living in net/ceph and include/linux/ceph. This is mostly a matter of moving files around. However, a few key pieces of the interface change as well: - ceph_client becomes ceph_fs_client and ceph_client, where the latter captures the mon and osd clients, and the fs_client gets the mds client and file system specific pieces. - Mount option parsing and debugfs setup is correspondingly broken into two pieces. - The mon client gets a generic handler callback for otherwise unknown messages (mds map, in this case). - The basic supported/required feature bits can be expanded (and are by ceph_fs_client). No functional change, aside from some subtle error handling cases that got cleaned up in the refactoring process. Signed-off-by: Sage Weil <sage@newdream.net>
2010-04-07 06:14:15 +08:00
fsc->mount_options->snapdir_name) == 0) {
ceph: directory operations Directory operations, including lookup, are defined here. We take advantage of lookup intents when possible. For the most part, we just need to build the proper requests for the metadata server(s) and pass things off to the mds_client. The results of most operations are normally incorporated into the client's cache when the reply is parsed by ceph_fill_trace(). However, if the MDS replies without a trace (e.g., when retrying an update after an MDS failure recovery), some operation-specific cleanup may be needed. We can validate cached dentries in two ways. A per-dentry lease may be issued by the MDS, or a per-directory cap may be issued that acts as a lease on the entire directory. In the latter case, a 'gen' value is used to determine which dentries belong to the currently leased directory contents. We normally prepopulate the dcache and icache with readdir results. This makes subsequent lookups and getattrs avoid any server interaction. It also lets us satisfy readdir operation by peeking at the dcache IFF we hold the per-directory cap/lease, previously performed a readdir, and haven't dropped any of the resulting dentries. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:08 +08:00
struct inode *inode = ceph_get_snapdir(parent);
dout("ENOENT on snapdir %p '%.*s', linking to snapdir %p\n",
dentry, dentry->d_name.len, dentry->d_name.name, inode);
ceph: fix dentry rehashing on virtual .snap dir If a lookup fails on the magic .snap directory, we bind it to a magic snap directory inode in ceph_lookup_finish(). That code assumes the dentry is unhashed, but a recent server-side change started returning NULL leases on lookup failure, causing the .snap dentry to be hashed and NULL by ceph_fill_trace(). This causes dentry hash chain corruption, or a dies when d_rehash() includes BUG_ON(!d_unhashed(entry)); So, avoid processing the NULL dentry lease if it the dentry matches the snapdir name in ceph_fill_trace(). That allows the lookup completion to properly bind it to the snapdir inode. BUG there if dentry is hashed to be sure. Signed-off-by: Sage Weil <sage@newdream.net>
2010-03-31 04:54:41 +08:00
BUG_ON(!d_unhashed(dentry));
ceph: directory operations Directory operations, including lookup, are defined here. We take advantage of lookup intents when possible. For the most part, we just need to build the proper requests for the metadata server(s) and pass things off to the mds_client. The results of most operations are normally incorporated into the client's cache when the reply is parsed by ceph_fill_trace(). However, if the MDS replies without a trace (e.g., when retrying an update after an MDS failure recovery), some operation-specific cleanup may be needed. We can validate cached dentries in two ways. A per-dentry lease may be issued by the MDS, or a per-directory cap may be issued that acts as a lease on the entire directory. In the latter case, a 'gen' value is used to determine which dentries belong to the currently leased directory contents. We normally prepopulate the dcache and icache with readdir results. This makes subsequent lookups and getattrs avoid any server interaction. It also lets us satisfy readdir operation by peeking at the dcache IFF we hold the per-directory cap/lease, previously performed a readdir, and haven't dropped any of the resulting dentries. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:08 +08:00
d_add(dentry, inode);
err = 0;
}
if (err == -ENOENT) {
/* no trace? */
err = 0;
if (!req->r_reply_info.head->is_dentry) {
dout("ENOENT and no trace, dentry %p inode %p\n",
dentry, dentry->d_inode);
if (dentry->d_inode) {
d_drop(dentry);
err = -ENOENT;
} else {
d_add(dentry, NULL);
}
}
}
if (err)
dentry = ERR_PTR(err);
else if (dentry != req->r_dentry)
dentry = dget(req->r_dentry); /* we got spliced */
else
dentry = NULL;
return dentry;
}
ceph: hide /.ceph from readdir results We need to skip /.ceph in (cached) readdir results, and exclude "/.ceph" from the cached ENOENT lookup check. Signed-off-by: Sage Weil <sage@newdream.net>
2009-12-03 03:54:25 +08:00
static int is_root_ceph_dentry(struct inode *inode, struct dentry *dentry)
{
return ceph_ino(inode) == CEPH_INO_ROOT &&
strncmp(dentry->d_name.name, ".ceph", 5) == 0;
}
ceph: directory operations Directory operations, including lookup, are defined here. We take advantage of lookup intents when possible. For the most part, we just need to build the proper requests for the metadata server(s) and pass things off to the mds_client. The results of most operations are normally incorporated into the client's cache when the reply is parsed by ceph_fill_trace(). However, if the MDS replies without a trace (e.g., when retrying an update after an MDS failure recovery), some operation-specific cleanup may be needed. We can validate cached dentries in two ways. A per-dentry lease may be issued by the MDS, or a per-directory cap may be issued that acts as a lease on the entire directory. In the latter case, a 'gen' value is used to determine which dentries belong to the currently leased directory contents. We normally prepopulate the dcache and icache with readdir results. This makes subsequent lookups and getattrs avoid any server interaction. It also lets us satisfy readdir operation by peeking at the dcache IFF we hold the per-directory cap/lease, previously performed a readdir, and haven't dropped any of the resulting dentries. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:08 +08:00
/*
* Look up a single dir entry. If there is a lookup intent, inform
* the MDS so that it gets our 'caps wanted' value in a single op.
*/
static struct dentry *ceph_lookup(struct inode *dir, struct dentry *dentry,
struct nameidata *nd)
{
ceph: factor out libceph from Ceph file system This factors out protocol and low-level storage parts of ceph into a separate libceph module living in net/ceph and include/linux/ceph. This is mostly a matter of moving files around. However, a few key pieces of the interface change as well: - ceph_client becomes ceph_fs_client and ceph_client, where the latter captures the mon and osd clients, and the fs_client gets the mds client and file system specific pieces. - Mount option parsing and debugfs setup is correspondingly broken into two pieces. - The mon client gets a generic handler callback for otherwise unknown messages (mds map, in this case). - The basic supported/required feature bits can be expanded (and are by ceph_fs_client). No functional change, aside from some subtle error handling cases that got cleaned up in the refactoring process. Signed-off-by: Sage Weil <sage@newdream.net>
2010-04-07 06:14:15 +08:00
struct ceph_fs_client *fsc = ceph_sb_to_client(dir->i_sb);
struct ceph_mds_client *mdsc = fsc->mdsc;
ceph: directory operations Directory operations, including lookup, are defined here. We take advantage of lookup intents when possible. For the most part, we just need to build the proper requests for the metadata server(s) and pass things off to the mds_client. The results of most operations are normally incorporated into the client's cache when the reply is parsed by ceph_fill_trace(). However, if the MDS replies without a trace (e.g., when retrying an update after an MDS failure recovery), some operation-specific cleanup may be needed. We can validate cached dentries in two ways. A per-dentry lease may be issued by the MDS, or a per-directory cap may be issued that acts as a lease on the entire directory. In the latter case, a 'gen' value is used to determine which dentries belong to the currently leased directory contents. We normally prepopulate the dcache and icache with readdir results. This makes subsequent lookups and getattrs avoid any server interaction. It also lets us satisfy readdir operation by peeking at the dcache IFF we hold the per-directory cap/lease, previously performed a readdir, and haven't dropped any of the resulting dentries. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:08 +08:00
struct ceph_mds_request *req;
int op;
int err;
dout("lookup %p dentry %p '%.*s'\n",
dir, dentry, dentry->d_name.len, dentry->d_name.name);
if (dentry->d_name.len > NAME_MAX)
return ERR_PTR(-ENAMETOOLONG);
err = ceph_init_dentry(dentry);
if (err < 0)
return ERR_PTR(err);
/* open (but not create!) intent? */
if (nd &&
(nd->flags & LOOKUP_OPEN) &&
(nd->flags & LOOKUP_CONTINUE) == 0 && /* only open last component */
!(nd->intent.open.flags & O_CREAT)) {
int mode = nd->intent.open.create_mode & ~current->fs->umask;
return ceph_lookup_open(dir, dentry, nd, mode, 1);
}
/* can we conclude ENOENT locally? */
if (dentry->d_inode == NULL) {
struct ceph_inode_info *ci = ceph_inode(dir);
struct ceph_dentry_info *di = ceph_dentry(dentry);
spin_lock(&dir->i_lock);
dout(" dir %p flags are %d\n", dir, ci->i_ceph_flags);
if (strncmp(dentry->d_name.name,
ceph: factor out libceph from Ceph file system This factors out protocol and low-level storage parts of ceph into a separate libceph module living in net/ceph and include/linux/ceph. This is mostly a matter of moving files around. However, a few key pieces of the interface change as well: - ceph_client becomes ceph_fs_client and ceph_client, where the latter captures the mon and osd clients, and the fs_client gets the mds client and file system specific pieces. - Mount option parsing and debugfs setup is correspondingly broken into two pieces. - The mon client gets a generic handler callback for otherwise unknown messages (mds map, in this case). - The basic supported/required feature bits can be expanded (and are by ceph_fs_client). No functional change, aside from some subtle error handling cases that got cleaned up in the refactoring process. Signed-off-by: Sage Weil <sage@newdream.net>
2010-04-07 06:14:15 +08:00
fsc->mount_options->snapdir_name,
ceph: directory operations Directory operations, including lookup, are defined here. We take advantage of lookup intents when possible. For the most part, we just need to build the proper requests for the metadata server(s) and pass things off to the mds_client. The results of most operations are normally incorporated into the client's cache when the reply is parsed by ceph_fill_trace(). However, if the MDS replies without a trace (e.g., when retrying an update after an MDS failure recovery), some operation-specific cleanup may be needed. We can validate cached dentries in two ways. A per-dentry lease may be issued by the MDS, or a per-directory cap may be issued that acts as a lease on the entire directory. In the latter case, a 'gen' value is used to determine which dentries belong to the currently leased directory contents. We normally prepopulate the dcache and icache with readdir results. This makes subsequent lookups and getattrs avoid any server interaction. It also lets us satisfy readdir operation by peeking at the dcache IFF we hold the per-directory cap/lease, previously performed a readdir, and haven't dropped any of the resulting dentries. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:08 +08:00
dentry->d_name.len) &&
ceph: hide /.ceph from readdir results We need to skip /.ceph in (cached) readdir results, and exclude "/.ceph" from the cached ENOENT lookup check. Signed-off-by: Sage Weil <sage@newdream.net>
2009-12-03 03:54:25 +08:00
!is_root_ceph_dentry(dir, dentry) &&
ceph: directory operations Directory operations, including lookup, are defined here. We take advantage of lookup intents when possible. For the most part, we just need to build the proper requests for the metadata server(s) and pass things off to the mds_client. The results of most operations are normally incorporated into the client's cache when the reply is parsed by ceph_fill_trace(). However, if the MDS replies without a trace (e.g., when retrying an update after an MDS failure recovery), some operation-specific cleanup may be needed. We can validate cached dentries in two ways. A per-dentry lease may be issued by the MDS, or a per-directory cap may be issued that acts as a lease on the entire directory. In the latter case, a 'gen' value is used to determine which dentries belong to the currently leased directory contents. We normally prepopulate the dcache and icache with readdir results. This makes subsequent lookups and getattrs avoid any server interaction. It also lets us satisfy readdir operation by peeking at the dcache IFF we hold the per-directory cap/lease, previously performed a readdir, and haven't dropped any of the resulting dentries. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:08 +08:00
(ci->i_ceph_flags & CEPH_I_COMPLETE) &&
(__ceph_caps_issued_mask(ci, CEPH_CAP_FILE_SHARED, 1))) {
spin_unlock(&dir->i_lock);
dout(" dir %p complete, -ENOENT\n", dir);
d_add(dentry, NULL);
di->lease_shared_gen = ci->i_shared_gen;
return NULL;
}
spin_unlock(&dir->i_lock);
}
op = ceph_snap(dir) == CEPH_SNAPDIR ?
CEPH_MDS_OP_LOOKUPSNAP : CEPH_MDS_OP_LOOKUP;
req = ceph_mdsc_create_request(mdsc, op, USE_ANY_MDS);
if (IS_ERR(req))
fs/ceph: Use ERR_CAST Use ERR_CAST(x) rather than ERR_PTR(PTR_ERR(x)). The former makes more clear what is the purpose of the operation, which otherwise looks like a no-op. In the case of fs/ceph/inode.c, ERR_CAST is not needed, because the type of the returned value is the same as the type of the enclosing function. The semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ type T; T x; identifier f; @@ T f (...) { <+... - ERR_PTR(PTR_ERR(x)) + x ...+> } @@ expression x; @@ - ERR_PTR(PTR_ERR(x)) + ERR_CAST(x) // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: Sage Weil <sage@newdream.net>
2010-05-22 18:01:14 +08:00
return ERR_CAST(req);
ceph: directory operations Directory operations, including lookup, are defined here. We take advantage of lookup intents when possible. For the most part, we just need to build the proper requests for the metadata server(s) and pass things off to the mds_client. The results of most operations are normally incorporated into the client's cache when the reply is parsed by ceph_fill_trace(). However, if the MDS replies without a trace (e.g., when retrying an update after an MDS failure recovery), some operation-specific cleanup may be needed. We can validate cached dentries in two ways. A per-dentry lease may be issued by the MDS, or a per-directory cap may be issued that acts as a lease on the entire directory. In the latter case, a 'gen' value is used to determine which dentries belong to the currently leased directory contents. We normally prepopulate the dcache and icache with readdir results. This makes subsequent lookups and getattrs avoid any server interaction. It also lets us satisfy readdir operation by peeking at the dcache IFF we hold the per-directory cap/lease, previously performed a readdir, and haven't dropped any of the resulting dentries. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:08 +08:00
req->r_dentry = dget(dentry);
req->r_num_caps = 2;
/* we only need inode linkage */
req->r_args.getattr.mask = cpu_to_le32(CEPH_STAT_CAP_INODE);
req->r_locked_dir = dir;
err = ceph_mdsc_do_request(mdsc, NULL, req);
dentry = ceph_finish_lookup(req, dentry, err);
ceph_mdsc_put_request(req); /* will dput(dentry) */
dout("lookup result=%p\n", dentry);
return dentry;
}
/*
* If we do a create but get no trace back from the MDS, follow up with
* a lookup (the VFS expects us to link up the provided dentry).
*/
int ceph_handle_notrace_create(struct inode *dir, struct dentry *dentry)
{
struct dentry *result = ceph_lookup(dir, dentry, NULL);
if (result && !IS_ERR(result)) {
/*
* We created the item, then did a lookup, and found
* it was already linked to another inode we already
* had in our cache (and thus got spliced). Link our
* dentry to that inode, but don't hash it, just in
* case the VFS wants to dereference it.
*/
BUG_ON(!result->d_inode);
d_instantiate(dentry, result->d_inode);
return 0;
}
return PTR_ERR(result);
}
static int ceph_mknod(struct inode *dir, struct dentry *dentry,
int mode, dev_t rdev)
{
ceph: factor out libceph from Ceph file system This factors out protocol and low-level storage parts of ceph into a separate libceph module living in net/ceph and include/linux/ceph. This is mostly a matter of moving files around. However, a few key pieces of the interface change as well: - ceph_client becomes ceph_fs_client and ceph_client, where the latter captures the mon and osd clients, and the fs_client gets the mds client and file system specific pieces. - Mount option parsing and debugfs setup is correspondingly broken into two pieces. - The mon client gets a generic handler callback for otherwise unknown messages (mds map, in this case). - The basic supported/required feature bits can be expanded (and are by ceph_fs_client). No functional change, aside from some subtle error handling cases that got cleaned up in the refactoring process. Signed-off-by: Sage Weil <sage@newdream.net>
2010-04-07 06:14:15 +08:00
struct ceph_fs_client *fsc = ceph_sb_to_client(dir->i_sb);
struct ceph_mds_client *mdsc = fsc->mdsc;
ceph: directory operations Directory operations, including lookup, are defined here. We take advantage of lookup intents when possible. For the most part, we just need to build the proper requests for the metadata server(s) and pass things off to the mds_client. The results of most operations are normally incorporated into the client's cache when the reply is parsed by ceph_fill_trace(). However, if the MDS replies without a trace (e.g., when retrying an update after an MDS failure recovery), some operation-specific cleanup may be needed. We can validate cached dentries in two ways. A per-dentry lease may be issued by the MDS, or a per-directory cap may be issued that acts as a lease on the entire directory. In the latter case, a 'gen' value is used to determine which dentries belong to the currently leased directory contents. We normally prepopulate the dcache and icache with readdir results. This makes subsequent lookups and getattrs avoid any server interaction. It also lets us satisfy readdir operation by peeking at the dcache IFF we hold the per-directory cap/lease, previously performed a readdir, and haven't dropped any of the resulting dentries. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:08 +08:00
struct ceph_mds_request *req;
int err;
if (ceph_snap(dir) != CEPH_NOSNAP)
return -EROFS;
dout("mknod in dir %p dentry %p mode 0%o rdev %d\n",
dir, dentry, mode, rdev);
req = ceph_mdsc_create_request(mdsc, CEPH_MDS_OP_MKNOD, USE_AUTH_MDS);
if (IS_ERR(req)) {
d_drop(dentry);
return PTR_ERR(req);
}
req->r_dentry = dget(dentry);
req->r_num_caps = 2;
req->r_locked_dir = dir;
req->r_args.mknod.mode = cpu_to_le32(mode);
req->r_args.mknod.rdev = cpu_to_le32(rdev);
req->r_dentry_drop = CEPH_CAP_FILE_SHARED;
req->r_dentry_unless = CEPH_CAP_FILE_EXCL;
err = ceph_mdsc_do_request(mdsc, dir, req);
if (!err && !req->r_reply_info.head->is_dentry)
err = ceph_handle_notrace_create(dir, dentry);
ceph_mdsc_put_request(req);
if (err)
d_drop(dentry);
return err;
}
static int ceph_create(struct inode *dir, struct dentry *dentry, int mode,
struct nameidata *nd)
{
dout("create in dir %p dentry %p name '%.*s'\n",
dir, dentry, dentry->d_name.len, dentry->d_name.name);
if (ceph_snap(dir) != CEPH_NOSNAP)
return -EROFS;
if (nd) {
BUG_ON((nd->flags & LOOKUP_OPEN) == 0);
dentry = ceph_lookup_open(dir, dentry, nd, mode, 0);
/* hrm, what should i do here if we get aliased? */
if (IS_ERR(dentry))
return PTR_ERR(dentry);
return 0;
}
/* fall back to mknod */
return ceph_mknod(dir, dentry, (mode & ~S_IFMT) | S_IFREG, 0);
}
static int ceph_symlink(struct inode *dir, struct dentry *dentry,
const char *dest)
{
ceph: factor out libceph from Ceph file system This factors out protocol and low-level storage parts of ceph into a separate libceph module living in net/ceph and include/linux/ceph. This is mostly a matter of moving files around. However, a few key pieces of the interface change as well: - ceph_client becomes ceph_fs_client and ceph_client, where the latter captures the mon and osd clients, and the fs_client gets the mds client and file system specific pieces. - Mount option parsing and debugfs setup is correspondingly broken into two pieces. - The mon client gets a generic handler callback for otherwise unknown messages (mds map, in this case). - The basic supported/required feature bits can be expanded (and are by ceph_fs_client). No functional change, aside from some subtle error handling cases that got cleaned up in the refactoring process. Signed-off-by: Sage Weil <sage@newdream.net>
2010-04-07 06:14:15 +08:00
struct ceph_fs_client *fsc = ceph_sb_to_client(dir->i_sb);
struct ceph_mds_client *mdsc = fsc->mdsc;
ceph: directory operations Directory operations, including lookup, are defined here. We take advantage of lookup intents when possible. For the most part, we just need to build the proper requests for the metadata server(s) and pass things off to the mds_client. The results of most operations are normally incorporated into the client's cache when the reply is parsed by ceph_fill_trace(). However, if the MDS replies without a trace (e.g., when retrying an update after an MDS failure recovery), some operation-specific cleanup may be needed. We can validate cached dentries in two ways. A per-dentry lease may be issued by the MDS, or a per-directory cap may be issued that acts as a lease on the entire directory. In the latter case, a 'gen' value is used to determine which dentries belong to the currently leased directory contents. We normally prepopulate the dcache and icache with readdir results. This makes subsequent lookups and getattrs avoid any server interaction. It also lets us satisfy readdir operation by peeking at the dcache IFF we hold the per-directory cap/lease, previously performed a readdir, and haven't dropped any of the resulting dentries. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:08 +08:00
struct ceph_mds_request *req;
int err;
if (ceph_snap(dir) != CEPH_NOSNAP)
return -EROFS;
dout("symlink in dir %p dentry %p to '%s'\n", dir, dentry, dest);
req = ceph_mdsc_create_request(mdsc, CEPH_MDS_OP_SYMLINK, USE_AUTH_MDS);
if (IS_ERR(req)) {
d_drop(dentry);
return PTR_ERR(req);
}
req->r_dentry = dget(dentry);
req->r_num_caps = 2;
req->r_path2 = kstrdup(dest, GFP_NOFS);
req->r_locked_dir = dir;
req->r_dentry_drop = CEPH_CAP_FILE_SHARED;
req->r_dentry_unless = CEPH_CAP_FILE_EXCL;
err = ceph_mdsc_do_request(mdsc, dir, req);
if (!err && !req->r_reply_info.head->is_dentry)
err = ceph_handle_notrace_create(dir, dentry);
ceph_mdsc_put_request(req);
if (err)
d_drop(dentry);
return err;
}
static int ceph_mkdir(struct inode *dir, struct dentry *dentry, int mode)
{
ceph: factor out libceph from Ceph file system This factors out protocol and low-level storage parts of ceph into a separate libceph module living in net/ceph and include/linux/ceph. This is mostly a matter of moving files around. However, a few key pieces of the interface change as well: - ceph_client becomes ceph_fs_client and ceph_client, where the latter captures the mon and osd clients, and the fs_client gets the mds client and file system specific pieces. - Mount option parsing and debugfs setup is correspondingly broken into two pieces. - The mon client gets a generic handler callback for otherwise unknown messages (mds map, in this case). - The basic supported/required feature bits can be expanded (and are by ceph_fs_client). No functional change, aside from some subtle error handling cases that got cleaned up in the refactoring process. Signed-off-by: Sage Weil <sage@newdream.net>
2010-04-07 06:14:15 +08:00
struct ceph_fs_client *fsc = ceph_sb_to_client(dir->i_sb);
struct ceph_mds_client *mdsc = fsc->mdsc;
ceph: directory operations Directory operations, including lookup, are defined here. We take advantage of lookup intents when possible. For the most part, we just need to build the proper requests for the metadata server(s) and pass things off to the mds_client. The results of most operations are normally incorporated into the client's cache when the reply is parsed by ceph_fill_trace(). However, if the MDS replies without a trace (e.g., when retrying an update after an MDS failure recovery), some operation-specific cleanup may be needed. We can validate cached dentries in two ways. A per-dentry lease may be issued by the MDS, or a per-directory cap may be issued that acts as a lease on the entire directory. In the latter case, a 'gen' value is used to determine which dentries belong to the currently leased directory contents. We normally prepopulate the dcache and icache with readdir results. This makes subsequent lookups and getattrs avoid any server interaction. It also lets us satisfy readdir operation by peeking at the dcache IFF we hold the per-directory cap/lease, previously performed a readdir, and haven't dropped any of the resulting dentries. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:08 +08:00
struct ceph_mds_request *req;
int err = -EROFS;
int op;
if (ceph_snap(dir) == CEPH_SNAPDIR) {
/* mkdir .snap/foo is a MKSNAP */
op = CEPH_MDS_OP_MKSNAP;
dout("mksnap dir %p snap '%.*s' dn %p\n", dir,
dentry->d_name.len, dentry->d_name.name, dentry);
} else if (ceph_snap(dir) == CEPH_NOSNAP) {
dout("mkdir dir %p dn %p mode 0%o\n", dir, dentry, mode);
op = CEPH_MDS_OP_MKDIR;
} else {
goto out;
}
req = ceph_mdsc_create_request(mdsc, op, USE_AUTH_MDS);
if (IS_ERR(req)) {
err = PTR_ERR(req);
goto out;
}
req->r_dentry = dget(dentry);
req->r_num_caps = 2;
req->r_locked_dir = dir;
req->r_args.mkdir.mode = cpu_to_le32(mode);
req->r_dentry_drop = CEPH_CAP_FILE_SHARED;
req->r_dentry_unless = CEPH_CAP_FILE_EXCL;
err = ceph_mdsc_do_request(mdsc, dir, req);
if (!err && !req->r_reply_info.head->is_dentry)
err = ceph_handle_notrace_create(dir, dentry);
ceph_mdsc_put_request(req);
out:
if (err < 0)
d_drop(dentry);
return err;
}
static int ceph_link(struct dentry *old_dentry, struct inode *dir,
struct dentry *dentry)
{
ceph: factor out libceph from Ceph file system This factors out protocol and low-level storage parts of ceph into a separate libceph module living in net/ceph and include/linux/ceph. This is mostly a matter of moving files around. However, a few key pieces of the interface change as well: - ceph_client becomes ceph_fs_client and ceph_client, where the latter captures the mon and osd clients, and the fs_client gets the mds client and file system specific pieces. - Mount option parsing and debugfs setup is correspondingly broken into two pieces. - The mon client gets a generic handler callback for otherwise unknown messages (mds map, in this case). - The basic supported/required feature bits can be expanded (and are by ceph_fs_client). No functional change, aside from some subtle error handling cases that got cleaned up in the refactoring process. Signed-off-by: Sage Weil <sage@newdream.net>
2010-04-07 06:14:15 +08:00
struct ceph_fs_client *fsc = ceph_sb_to_client(dir->i_sb);
struct ceph_mds_client *mdsc = fsc->mdsc;
ceph: directory operations Directory operations, including lookup, are defined here. We take advantage of lookup intents when possible. For the most part, we just need to build the proper requests for the metadata server(s) and pass things off to the mds_client. The results of most operations are normally incorporated into the client's cache when the reply is parsed by ceph_fill_trace(). However, if the MDS replies without a trace (e.g., when retrying an update after an MDS failure recovery), some operation-specific cleanup may be needed. We can validate cached dentries in two ways. A per-dentry lease may be issued by the MDS, or a per-directory cap may be issued that acts as a lease on the entire directory. In the latter case, a 'gen' value is used to determine which dentries belong to the currently leased directory contents. We normally prepopulate the dcache and icache with readdir results. This makes subsequent lookups and getattrs avoid any server interaction. It also lets us satisfy readdir operation by peeking at the dcache IFF we hold the per-directory cap/lease, previously performed a readdir, and haven't dropped any of the resulting dentries. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:08 +08:00
struct ceph_mds_request *req;
int err;
if (ceph_snap(dir) != CEPH_NOSNAP)
return -EROFS;
dout("link in dir %p old_dentry %p dentry %p\n", dir,
old_dentry, dentry);
req = ceph_mdsc_create_request(mdsc, CEPH_MDS_OP_LINK, USE_AUTH_MDS);
if (IS_ERR(req)) {
d_drop(dentry);
return PTR_ERR(req);
}
req->r_dentry = dget(dentry);
req->r_num_caps = 2;
req->r_old_dentry = dget(old_dentry); /* or inode? hrm. */
req->r_locked_dir = dir;
req->r_dentry_drop = CEPH_CAP_FILE_SHARED;
req->r_dentry_unless = CEPH_CAP_FILE_EXCL;
err = ceph_mdsc_do_request(mdsc, dir, req);
if (err)
d_drop(dentry);
else if (!req->r_reply_info.head->is_dentry)
d_instantiate(dentry, igrab(old_dentry->d_inode));
ceph_mdsc_put_request(req);
return err;
}
/*
* For a soon-to-be unlinked file, drop the AUTH_RDCACHE caps. If it
* looks like the link count will hit 0, drop any other caps (other
* than PIN) we don't specifically want (due to the file still being
* open).
*/
static int drop_caps_for_unlink(struct inode *inode)
{
struct ceph_inode_info *ci = ceph_inode(inode);
int drop = CEPH_CAP_LINK_SHARED | CEPH_CAP_LINK_EXCL;
spin_lock(&inode->i_lock);
if (inode->i_nlink == 1) {
drop |= ~(__ceph_caps_wanted(ci) | CEPH_CAP_PIN);
ci->i_ceph_flags |= CEPH_I_NODELAY;
}
spin_unlock(&inode->i_lock);
return drop;
}
/*
* rmdir and unlink are differ only by the metadata op code
*/
static int ceph_unlink(struct inode *dir, struct dentry *dentry)
{
ceph: factor out libceph from Ceph file system This factors out protocol and low-level storage parts of ceph into a separate libceph module living in net/ceph and include/linux/ceph. This is mostly a matter of moving files around. However, a few key pieces of the interface change as well: - ceph_client becomes ceph_fs_client and ceph_client, where the latter captures the mon and osd clients, and the fs_client gets the mds client and file system specific pieces. - Mount option parsing and debugfs setup is correspondingly broken into two pieces. - The mon client gets a generic handler callback for otherwise unknown messages (mds map, in this case). - The basic supported/required feature bits can be expanded (and are by ceph_fs_client). No functional change, aside from some subtle error handling cases that got cleaned up in the refactoring process. Signed-off-by: Sage Weil <sage@newdream.net>
2010-04-07 06:14:15 +08:00
struct ceph_fs_client *fsc = ceph_sb_to_client(dir->i_sb);
struct ceph_mds_client *mdsc = fsc->mdsc;
ceph: directory operations Directory operations, including lookup, are defined here. We take advantage of lookup intents when possible. For the most part, we just need to build the proper requests for the metadata server(s) and pass things off to the mds_client. The results of most operations are normally incorporated into the client's cache when the reply is parsed by ceph_fill_trace(). However, if the MDS replies without a trace (e.g., when retrying an update after an MDS failure recovery), some operation-specific cleanup may be needed. We can validate cached dentries in two ways. A per-dentry lease may be issued by the MDS, or a per-directory cap may be issued that acts as a lease on the entire directory. In the latter case, a 'gen' value is used to determine which dentries belong to the currently leased directory contents. We normally prepopulate the dcache and icache with readdir results. This makes subsequent lookups and getattrs avoid any server interaction. It also lets us satisfy readdir operation by peeking at the dcache IFF we hold the per-directory cap/lease, previously performed a readdir, and haven't dropped any of the resulting dentries. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:08 +08:00
struct inode *inode = dentry->d_inode;
struct ceph_mds_request *req;
int err = -EROFS;
int op;
if (ceph_snap(dir) == CEPH_SNAPDIR) {
/* rmdir .snap/foo is RMSNAP */
dout("rmsnap dir %p '%.*s' dn %p\n", dir, dentry->d_name.len,
dentry->d_name.name, dentry);
op = CEPH_MDS_OP_RMSNAP;
} else if (ceph_snap(dir) == CEPH_NOSNAP) {
dout("unlink/rmdir dir %p dn %p inode %p\n",
dir, dentry, inode);
op = ((dentry->d_inode->i_mode & S_IFMT) == S_IFDIR) ?
CEPH_MDS_OP_RMDIR : CEPH_MDS_OP_UNLINK;
} else
goto out;
req = ceph_mdsc_create_request(mdsc, op, USE_AUTH_MDS);
if (IS_ERR(req)) {
err = PTR_ERR(req);
goto out;
}
req->r_dentry = dget(dentry);
req->r_num_caps = 2;
req->r_locked_dir = dir;
req->r_dentry_drop = CEPH_CAP_FILE_SHARED;
req->r_dentry_unless = CEPH_CAP_FILE_EXCL;
req->r_inode_drop = drop_caps_for_unlink(inode);
err = ceph_mdsc_do_request(mdsc, dir, req);
if (!err && !req->r_reply_info.head->is_dentry)
d_delete(dentry);
ceph_mdsc_put_request(req);
out:
return err;
}
static int ceph_rename(struct inode *old_dir, struct dentry *old_dentry,
struct inode *new_dir, struct dentry *new_dentry)
{
ceph: factor out libceph from Ceph file system This factors out protocol and low-level storage parts of ceph into a separate libceph module living in net/ceph and include/linux/ceph. This is mostly a matter of moving files around. However, a few key pieces of the interface change as well: - ceph_client becomes ceph_fs_client and ceph_client, where the latter captures the mon and osd clients, and the fs_client gets the mds client and file system specific pieces. - Mount option parsing and debugfs setup is correspondingly broken into two pieces. - The mon client gets a generic handler callback for otherwise unknown messages (mds map, in this case). - The basic supported/required feature bits can be expanded (and are by ceph_fs_client). No functional change, aside from some subtle error handling cases that got cleaned up in the refactoring process. Signed-off-by: Sage Weil <sage@newdream.net>
2010-04-07 06:14:15 +08:00
struct ceph_fs_client *fsc = ceph_sb_to_client(old_dir->i_sb);
struct ceph_mds_client *mdsc = fsc->mdsc;
ceph: directory operations Directory operations, including lookup, are defined here. We take advantage of lookup intents when possible. For the most part, we just need to build the proper requests for the metadata server(s) and pass things off to the mds_client. The results of most operations are normally incorporated into the client's cache when the reply is parsed by ceph_fill_trace(). However, if the MDS replies without a trace (e.g., when retrying an update after an MDS failure recovery), some operation-specific cleanup may be needed. We can validate cached dentries in two ways. A per-dentry lease may be issued by the MDS, or a per-directory cap may be issued that acts as a lease on the entire directory. In the latter case, a 'gen' value is used to determine which dentries belong to the currently leased directory contents. We normally prepopulate the dcache and icache with readdir results. This makes subsequent lookups and getattrs avoid any server interaction. It also lets us satisfy readdir operation by peeking at the dcache IFF we hold the per-directory cap/lease, previously performed a readdir, and haven't dropped any of the resulting dentries. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:08 +08:00
struct ceph_mds_request *req;
int err;
if (ceph_snap(old_dir) != ceph_snap(new_dir))
return -EXDEV;
if (ceph_snap(old_dir) != CEPH_NOSNAP ||
ceph_snap(new_dir) != CEPH_NOSNAP)
return -EROFS;
dout("rename dir %p dentry %p to dir %p dentry %p\n",
old_dir, old_dentry, new_dir, new_dentry);
req = ceph_mdsc_create_request(mdsc, CEPH_MDS_OP_RENAME, USE_AUTH_MDS);
if (IS_ERR(req))
return PTR_ERR(req);
req->r_dentry = dget(new_dentry);
req->r_num_caps = 2;
req->r_old_dentry = dget(old_dentry);
req->r_locked_dir = new_dir;
req->r_old_dentry_drop = CEPH_CAP_FILE_SHARED;
req->r_old_dentry_unless = CEPH_CAP_FILE_EXCL;
req->r_dentry_drop = CEPH_CAP_FILE_SHARED;
req->r_dentry_unless = CEPH_CAP_FILE_EXCL;
/* release LINK_RDCACHE on source inode (mds will lock it) */
req->r_old_inode_drop = CEPH_CAP_LINK_SHARED;
if (new_dentry->d_inode)
req->r_inode_drop = drop_caps_for_unlink(new_dentry->d_inode);
err = ceph_mdsc_do_request(mdsc, old_dir, req);
if (!err && !req->r_reply_info.head->is_dentry) {
/*
* Normally d_move() is done by fill_trace (called by
* do_request, above). If there is no trace, we need
* to do it here.
*/
ceph: clear dir complete, invalidate dentry on replayed rename If a rename operation is resent to the MDS following an MDS restart, the client does not get a full reply (containing the resulting metadata) back. In that case, a ceph_rename() needs to compensate by doing anything useful that fill_inode() would have, like d_move(). It also needs to invalidate the dentry (to workaround the vfs_rename_dir() bug) and clear the dir complete flag, just like fill_trace(). Signed-off-by: Sage Weil <sage@newdream.net>
2010-04-29 07:12:06 +08:00
/* d_move screws up d_subdirs order */
ceph_i_clear(new_dir, CEPH_I_COMPLETE);
ceph: directory operations Directory operations, including lookup, are defined here. We take advantage of lookup intents when possible. For the most part, we just need to build the proper requests for the metadata server(s) and pass things off to the mds_client. The results of most operations are normally incorporated into the client's cache when the reply is parsed by ceph_fill_trace(). However, if the MDS replies without a trace (e.g., when retrying an update after an MDS failure recovery), some operation-specific cleanup may be needed. We can validate cached dentries in two ways. A per-dentry lease may be issued by the MDS, or a per-directory cap may be issued that acts as a lease on the entire directory. In the latter case, a 'gen' value is used to determine which dentries belong to the currently leased directory contents. We normally prepopulate the dcache and icache with readdir results. This makes subsequent lookups and getattrs avoid any server interaction. It also lets us satisfy readdir operation by peeking at the dcache IFF we hold the per-directory cap/lease, previously performed a readdir, and haven't dropped any of the resulting dentries. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:08 +08:00
d_move(old_dentry, new_dentry);
ceph: clear dir complete, invalidate dentry on replayed rename If a rename operation is resent to the MDS following an MDS restart, the client does not get a full reply (containing the resulting metadata) back. In that case, a ceph_rename() needs to compensate by doing anything useful that fill_inode() would have, like d_move(). It also needs to invalidate the dentry (to workaround the vfs_rename_dir() bug) and clear the dir complete flag, just like fill_trace(). Signed-off-by: Sage Weil <sage@newdream.net>
2010-04-29 07:12:06 +08:00
/* ensure target dentry is invalidated, despite
rehashing bug in vfs_rename_dir */
ceph: invalidate affected dentry leases on aborted requests If we abort a request, we return to caller, but the request may still complete. And if we hold the dir FILE_EXCL bit, we may not release a lease when sending a request. A simple un-tar, control-c, un-tar again will reproduce the bug (manifested as a 'Cannot open: File exists'). Ensure we invalidate affected dentry leases (as well dir I_COMPLETE) so we don't have valid (but incorrect) leases. Do the same, consistently, at other sites where I_COMPLETE is similarly cleared. Signed-off-by: Sage Weil <sage@newdream.net>
2010-05-15 00:35:38 +08:00
ceph_invalidate_dentry_lease(new_dentry);
ceph: directory operations Directory operations, including lookup, are defined here. We take advantage of lookup intents when possible. For the most part, we just need to build the proper requests for the metadata server(s) and pass things off to the mds_client. The results of most operations are normally incorporated into the client's cache when the reply is parsed by ceph_fill_trace(). However, if the MDS replies without a trace (e.g., when retrying an update after an MDS failure recovery), some operation-specific cleanup may be needed. We can validate cached dentries in two ways. A per-dentry lease may be issued by the MDS, or a per-directory cap may be issued that acts as a lease on the entire directory. In the latter case, a 'gen' value is used to determine which dentries belong to the currently leased directory contents. We normally prepopulate the dcache and icache with readdir results. This makes subsequent lookups and getattrs avoid any server interaction. It also lets us satisfy readdir operation by peeking at the dcache IFF we hold the per-directory cap/lease, previously performed a readdir, and haven't dropped any of the resulting dentries. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:08 +08:00
}
ceph_mdsc_put_request(req);
return err;
}
ceph: invalidate affected dentry leases on aborted requests If we abort a request, we return to caller, but the request may still complete. And if we hold the dir FILE_EXCL bit, we may not release a lease when sending a request. A simple un-tar, control-c, un-tar again will reproduce the bug (manifested as a 'Cannot open: File exists'). Ensure we invalidate affected dentry leases (as well dir I_COMPLETE) so we don't have valid (but incorrect) leases. Do the same, consistently, at other sites where I_COMPLETE is similarly cleared. Signed-off-by: Sage Weil <sage@newdream.net>
2010-05-15 00:35:38 +08:00
/*
* Ensure a dentry lease will no longer revalidate.
*/
void ceph_invalidate_dentry_lease(struct dentry *dentry)
{
spin_lock(&dentry->d_lock);
dentry->d_time = jiffies;
ceph_dentry(dentry)->lease_shared_gen = 0;
spin_unlock(&dentry->d_lock);
}
ceph: directory operations Directory operations, including lookup, are defined here. We take advantage of lookup intents when possible. For the most part, we just need to build the proper requests for the metadata server(s) and pass things off to the mds_client. The results of most operations are normally incorporated into the client's cache when the reply is parsed by ceph_fill_trace(). However, if the MDS replies without a trace (e.g., when retrying an update after an MDS failure recovery), some operation-specific cleanup may be needed. We can validate cached dentries in two ways. A per-dentry lease may be issued by the MDS, or a per-directory cap may be issued that acts as a lease on the entire directory. In the latter case, a 'gen' value is used to determine which dentries belong to the currently leased directory contents. We normally prepopulate the dcache and icache with readdir results. This makes subsequent lookups and getattrs avoid any server interaction. It also lets us satisfy readdir operation by peeking at the dcache IFF we hold the per-directory cap/lease, previously performed a readdir, and haven't dropped any of the resulting dentries. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:08 +08:00
/*
* Check if dentry lease is valid. If not, delete the lease. Try to
* renew if the least is more than half up.
*/
static int dentry_lease_is_valid(struct dentry *dentry)
{
struct ceph_dentry_info *di;
struct ceph_mds_session *s;
int valid = 0;
u32 gen;
unsigned long ttl;
struct ceph_mds_session *session = NULL;
struct inode *dir = NULL;
u32 seq = 0;
spin_lock(&dentry->d_lock);
di = ceph_dentry(dentry);
if (di && di->lease_session) {
s = di->lease_session;
spin_lock(&s->s_cap_lock);
gen = s->s_cap_gen;
ttl = s->s_cap_ttl;
spin_unlock(&s->s_cap_lock);
if (di->lease_gen == gen &&
time_before(jiffies, dentry->d_time) &&
time_before(jiffies, ttl)) {
valid = 1;
if (di->lease_renew_after &&
time_after(jiffies, di->lease_renew_after)) {
/* we should renew */
dir = dentry->d_parent->d_inode;
session = ceph_get_mds_session(s);
seq = di->lease_seq;
di->lease_renew_after = 0;
di->lease_renew_from = jiffies;
}
}
}
spin_unlock(&dentry->d_lock);
if (session) {
ceph_mdsc_lease_send_msg(session, dir, dentry,
CEPH_MDS_LEASE_RENEW, seq);
ceph_put_mds_session(session);
}
dout("dentry_lease_is_valid - dentry %p = %d\n", dentry, valid);
return valid;
}
/*
* Check if directory-wide content lease/cap is valid.
*/
static int dir_lease_is_valid(struct inode *dir, struct dentry *dentry)
{
struct ceph_inode_info *ci = ceph_inode(dir);
struct ceph_dentry_info *di = ceph_dentry(dentry);
int valid = 0;
spin_lock(&dir->i_lock);
if (ci->i_shared_gen == di->lease_shared_gen)
valid = __ceph_caps_issued_mask(ci, CEPH_CAP_FILE_SHARED, 1);
spin_unlock(&dir->i_lock);
dout("dir_lease_is_valid dir %p v%u dentry %p v%u = %d\n",
dir, (unsigned)ci->i_shared_gen, dentry,
(unsigned)di->lease_shared_gen, valid);
return valid;
}
/*
* Check if cached dentry can be trusted.
*/
static int ceph_d_revalidate(struct dentry *dentry, struct nameidata *nd)
{
struct inode *dir = dentry->d_parent->d_inode;
ceph: set dn offset when spliced We want to assign an offset when the dentry goes from null to linked, which is always done by splice_dentry(). Notably, we should NOT assign an offset when a dentry is first created and is still null. BUG if we try to splice a non-null dentry (we shouldn't). Signed-off-by: Sage Weil <sage@newdream.net>
2010-05-04 13:08:02 +08:00
dout("d_revalidate %p '%.*s' inode %p offset %lld\n", dentry,
dentry->d_name.len, dentry->d_name.name, dentry->d_inode,
ceph_dentry(dentry)->offset);
ceph: directory operations Directory operations, including lookup, are defined here. We take advantage of lookup intents when possible. For the most part, we just need to build the proper requests for the metadata server(s) and pass things off to the mds_client. The results of most operations are normally incorporated into the client's cache when the reply is parsed by ceph_fill_trace(). However, if the MDS replies without a trace (e.g., when retrying an update after an MDS failure recovery), some operation-specific cleanup may be needed. We can validate cached dentries in two ways. A per-dentry lease may be issued by the MDS, or a per-directory cap may be issued that acts as a lease on the entire directory. In the latter case, a 'gen' value is used to determine which dentries belong to the currently leased directory contents. We normally prepopulate the dcache and icache with readdir results. This makes subsequent lookups and getattrs avoid any server interaction. It also lets us satisfy readdir operation by peeking at the dcache IFF we hold the per-directory cap/lease, previously performed a readdir, and haven't dropped any of the resulting dentries. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:08 +08:00
/* always trust cached snapped dentries, snapdir dentry */
if (ceph_snap(dir) != CEPH_NOSNAP) {
dout("d_revalidate %p '%.*s' inode %p is SNAPPED\n", dentry,
dentry->d_name.len, dentry->d_name.name, dentry->d_inode);
goto out_touch;
}
if (dentry->d_inode && ceph_snap(dentry->d_inode) == CEPH_SNAPDIR)
goto out_touch;
if (dentry_lease_is_valid(dentry) ||
dir_lease_is_valid(dir, dentry))
goto out_touch;
dout("d_revalidate %p invalid\n", dentry);
d_drop(dentry);
return 0;
out_touch:
ceph_dentry_lru_touch(dentry);
return 1;
}
/*
* When a dentry is released, clear the dir I_COMPLETE if it was part
ceph: fix d_release dop for snapdir, snapped dentries We need to set the d_release dop for snapdir and snapped dentries so that the ceph_dentry_info struct gets released. We also use the dcache to cache readdir results when possible, which only works if we know when dentries are dropped from the cache. Since we don't use the dcache for readdir in the hidden snapdir, avoid that case in ceph_dentry_release. Signed-off-by: Sage Weil <sage@newdream.net>
2010-07-23 04:49:08 +08:00
* of the current dir gen or if this is in the snapshot namespace.
ceph: directory operations Directory operations, including lookup, are defined here. We take advantage of lookup intents when possible. For the most part, we just need to build the proper requests for the metadata server(s) and pass things off to the mds_client. The results of most operations are normally incorporated into the client's cache when the reply is parsed by ceph_fill_trace(). However, if the MDS replies without a trace (e.g., when retrying an update after an MDS failure recovery), some operation-specific cleanup may be needed. We can validate cached dentries in two ways. A per-dentry lease may be issued by the MDS, or a per-directory cap may be issued that acts as a lease on the entire directory. In the latter case, a 'gen' value is used to determine which dentries belong to the currently leased directory contents. We normally prepopulate the dcache and icache with readdir results. This makes subsequent lookups and getattrs avoid any server interaction. It also lets us satisfy readdir operation by peeking at the dcache IFF we hold the per-directory cap/lease, previously performed a readdir, and haven't dropped any of the resulting dentries. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:08 +08:00
*/
static void ceph_dentry_release(struct dentry *dentry)
{
struct ceph_dentry_info *di = ceph_dentry(dentry);
ceph: fix null pointer deref on anon root dentry release When we release a root dentry, particularly after a splice, the parent (actually our) inode was evaluating to NULL and was getting dereferenced by ceph_snap(). This is reproduced by something as simple as mount -t ceph monhost:/a/b mnt mount -t ceph monhost:/a mnt2 ls mnt2 A splice_dentry() would kill the old 'b' inode's root dentry, and we'd crash while releasing it. Fix by checking for both the ROOT and NULL cases explicitly. We only need to invalidate the parent dir when we have a correct parent to invalidate. Signed-off-by: Sage Weil <sage@newdream.net>
2010-08-27 07:12:01 +08:00
struct inode *parent_inode = NULL;
u64 snapid = CEPH_NOSNAP;
ceph: directory operations Directory operations, including lookup, are defined here. We take advantage of lookup intents when possible. For the most part, we just need to build the proper requests for the metadata server(s) and pass things off to the mds_client. The results of most operations are normally incorporated into the client's cache when the reply is parsed by ceph_fill_trace(). However, if the MDS replies without a trace (e.g., when retrying an update after an MDS failure recovery), some operation-specific cleanup may be needed. We can validate cached dentries in two ways. A per-dentry lease may be issued by the MDS, or a per-directory cap may be issued that acts as a lease on the entire directory. In the latter case, a 'gen' value is used to determine which dentries belong to the currently leased directory contents. We normally prepopulate the dcache and icache with readdir results. This makes subsequent lookups and getattrs avoid any server interaction. It also lets us satisfy readdir operation by peeking at the dcache IFF we hold the per-directory cap/lease, previously performed a readdir, and haven't dropped any of the resulting dentries. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:08 +08:00
ceph: fix null pointer deref on anon root dentry release When we release a root dentry, particularly after a splice, the parent (actually our) inode was evaluating to NULL and was getting dereferenced by ceph_snap(). This is reproduced by something as simple as mount -t ceph monhost:/a/b mnt mount -t ceph monhost:/a mnt2 ls mnt2 A splice_dentry() would kill the old 'b' inode's root dentry, and we'd crash while releasing it. Fix by checking for both the ROOT and NULL cases explicitly. We only need to invalidate the parent dir when we have a correct parent to invalidate. Signed-off-by: Sage Weil <sage@newdream.net>
2010-08-27 07:12:01 +08:00
if (!IS_ROOT(dentry)) {
parent_inode = dentry->d_parent->d_inode;
if (parent_inode)
snapid = ceph_snap(parent_inode);
}
ceph: fix d_release dop for snapdir, snapped dentries We need to set the d_release dop for snapdir and snapped dentries so that the ceph_dentry_info struct gets released. We also use the dcache to cache readdir results when possible, which only works if we know when dentries are dropped from the cache. Since we don't use the dcache for readdir in the hidden snapdir, avoid that case in ceph_dentry_release. Signed-off-by: Sage Weil <sage@newdream.net>
2010-07-23 04:49:08 +08:00
dout("dentry_release %p parent %p\n", dentry, parent_inode);
if (parent_inode && snapid != CEPH_SNAPDIR) {
ceph: directory operations Directory operations, including lookup, are defined here. We take advantage of lookup intents when possible. For the most part, we just need to build the proper requests for the metadata server(s) and pass things off to the mds_client. The results of most operations are normally incorporated into the client's cache when the reply is parsed by ceph_fill_trace(). However, if the MDS replies without a trace (e.g., when retrying an update after an MDS failure recovery), some operation-specific cleanup may be needed. We can validate cached dentries in two ways. A per-dentry lease may be issued by the MDS, or a per-directory cap may be issued that acts as a lease on the entire directory. In the latter case, a 'gen' value is used to determine which dentries belong to the currently leased directory contents. We normally prepopulate the dcache and icache with readdir results. This makes subsequent lookups and getattrs avoid any server interaction. It also lets us satisfy readdir operation by peeking at the dcache IFF we hold the per-directory cap/lease, previously performed a readdir, and haven't dropped any of the resulting dentries. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:08 +08:00
struct ceph_inode_info *ci = ceph_inode(parent_inode);
spin_lock(&parent_inode->i_lock);
ceph: fix d_release dop for snapdir, snapped dentries We need to set the d_release dop for snapdir and snapped dentries so that the ceph_dentry_info struct gets released. We also use the dcache to cache readdir results when possible, which only works if we know when dentries are dropped from the cache. Since we don't use the dcache for readdir in the hidden snapdir, avoid that case in ceph_dentry_release. Signed-off-by: Sage Weil <sage@newdream.net>
2010-07-23 04:49:08 +08:00
if (ci->i_shared_gen == di->lease_shared_gen ||
snapid <= CEPH_MAXSNAP) {
ceph: directory operations Directory operations, including lookup, are defined here. We take advantage of lookup intents when possible. For the most part, we just need to build the proper requests for the metadata server(s) and pass things off to the mds_client. The results of most operations are normally incorporated into the client's cache when the reply is parsed by ceph_fill_trace(). However, if the MDS replies without a trace (e.g., when retrying an update after an MDS failure recovery), some operation-specific cleanup may be needed. We can validate cached dentries in two ways. A per-dentry lease may be issued by the MDS, or a per-directory cap may be issued that acts as a lease on the entire directory. In the latter case, a 'gen' value is used to determine which dentries belong to the currently leased directory contents. We normally prepopulate the dcache and icache with readdir results. This makes subsequent lookups and getattrs avoid any server interaction. It also lets us satisfy readdir operation by peeking at the dcache IFF we hold the per-directory cap/lease, previously performed a readdir, and haven't dropped any of the resulting dentries. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:08 +08:00
dout(" clearing %p complete (d_release)\n",
parent_inode);
ci->i_ceph_flags &= ~CEPH_I_COMPLETE;
ci->i_release_count++;
}
spin_unlock(&parent_inode->i_lock);
}
if (di) {
ceph_dentry_lru_del(dentry);
if (di->lease_session)
ceph_put_mds_session(di->lease_session);
kmem_cache_free(ceph_dentry_cachep, di);
dentry->d_fsdata = NULL;
}
}
static int ceph_snapdir_d_revalidate(struct dentry *dentry,
struct nameidata *nd)
{
/*
* Eventually, we'll want to revalidate snapped metadata
* too... probably...
*/
return 1;
}
/*
* read() on a dir. This weird interface hack only works if mounted
* with '-o dirstat'.
*/
static ssize_t ceph_read_dir(struct file *file, char __user *buf, size_t size,
loff_t *ppos)
{
struct ceph_file_info *cf = file->private_data;
struct inode *inode = file->f_dentry->d_inode;
struct ceph_inode_info *ci = ceph_inode(inode);
int left;
ceph: factor out libceph from Ceph file system This factors out protocol and low-level storage parts of ceph into a separate libceph module living in net/ceph and include/linux/ceph. This is mostly a matter of moving files around. However, a few key pieces of the interface change as well: - ceph_client becomes ceph_fs_client and ceph_client, where the latter captures the mon and osd clients, and the fs_client gets the mds client and file system specific pieces. - Mount option parsing and debugfs setup is correspondingly broken into two pieces. - The mon client gets a generic handler callback for otherwise unknown messages (mds map, in this case). - The basic supported/required feature bits can be expanded (and are by ceph_fs_client). No functional change, aside from some subtle error handling cases that got cleaned up in the refactoring process. Signed-off-by: Sage Weil <sage@newdream.net>
2010-04-07 06:14:15 +08:00
if (!ceph_test_mount_opt(ceph_sb_to_client(inode->i_sb), DIRSTAT))
ceph: directory operations Directory operations, including lookup, are defined here. We take advantage of lookup intents when possible. For the most part, we just need to build the proper requests for the metadata server(s) and pass things off to the mds_client. The results of most operations are normally incorporated into the client's cache when the reply is parsed by ceph_fill_trace(). However, if the MDS replies without a trace (e.g., when retrying an update after an MDS failure recovery), some operation-specific cleanup may be needed. We can validate cached dentries in two ways. A per-dentry lease may be issued by the MDS, or a per-directory cap may be issued that acts as a lease on the entire directory. In the latter case, a 'gen' value is used to determine which dentries belong to the currently leased directory contents. We normally prepopulate the dcache and icache with readdir results. This makes subsequent lookups and getattrs avoid any server interaction. It also lets us satisfy readdir operation by peeking at the dcache IFF we hold the per-directory cap/lease, previously performed a readdir, and haven't dropped any of the resulting dentries. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:08 +08:00
return -EISDIR;
if (!cf->dir_info) {
cf->dir_info = kmalloc(1024, GFP_NOFS);
if (!cf->dir_info)
return -ENOMEM;
cf->dir_info_len =
sprintf(cf->dir_info,
"entries: %20lld\n"
" files: %20lld\n"
" subdirs: %20lld\n"
"rentries: %20lld\n"
" rfiles: %20lld\n"
" rsubdirs: %20lld\n"
"rbytes: %20lld\n"
"rctime: %10ld.%09ld\n",
ci->i_files + ci->i_subdirs,
ci->i_files,
ci->i_subdirs,
ci->i_rfiles + ci->i_rsubdirs,
ci->i_rfiles,
ci->i_rsubdirs,
ci->i_rbytes,
(long)ci->i_rctime.tv_sec,
(long)ci->i_rctime.tv_nsec);
}
if (*ppos >= cf->dir_info_len)
return 0;
size = min_t(unsigned, size, cf->dir_info_len-*ppos);
left = copy_to_user(buf, cf->dir_info + *ppos, size);
if (left == size)
return -EFAULT;
*ppos += (size - left);
return size - left;
}
/*
* an fsync() on a dir will wait for any uncommitted directory
* operations to commit.
*/
drop unused dentry argument to ->fsync Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2010-05-26 23:53:25 +08:00
static int ceph_dir_fsync(struct file *file, int datasync)
ceph: directory operations Directory operations, including lookup, are defined here. We take advantage of lookup intents when possible. For the most part, we just need to build the proper requests for the metadata server(s) and pass things off to the mds_client. The results of most operations are normally incorporated into the client's cache when the reply is parsed by ceph_fill_trace(). However, if the MDS replies without a trace (e.g., when retrying an update after an MDS failure recovery), some operation-specific cleanup may be needed. We can validate cached dentries in two ways. A per-dentry lease may be issued by the MDS, or a per-directory cap may be issued that acts as a lease on the entire directory. In the latter case, a 'gen' value is used to determine which dentries belong to the currently leased directory contents. We normally prepopulate the dcache and icache with readdir results. This makes subsequent lookups and getattrs avoid any server interaction. It also lets us satisfy readdir operation by peeking at the dcache IFF we hold the per-directory cap/lease, previously performed a readdir, and haven't dropped any of the resulting dentries. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:08 +08:00
{
drop unused dentry argument to ->fsync Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2010-05-26 23:53:25 +08:00
struct inode *inode = file->f_path.dentry->d_inode;
ceph: directory operations Directory operations, including lookup, are defined here. We take advantage of lookup intents when possible. For the most part, we just need to build the proper requests for the metadata server(s) and pass things off to the mds_client. The results of most operations are normally incorporated into the client's cache when the reply is parsed by ceph_fill_trace(). However, if the MDS replies without a trace (e.g., when retrying an update after an MDS failure recovery), some operation-specific cleanup may be needed. We can validate cached dentries in two ways. A per-dentry lease may be issued by the MDS, or a per-directory cap may be issued that acts as a lease on the entire directory. In the latter case, a 'gen' value is used to determine which dentries belong to the currently leased directory contents. We normally prepopulate the dcache and icache with readdir results. This makes subsequent lookups and getattrs avoid any server interaction. It also lets us satisfy readdir operation by peeking at the dcache IFF we hold the per-directory cap/lease, previously performed a readdir, and haven't dropped any of the resulting dentries. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:08 +08:00
struct ceph_inode_info *ci = ceph_inode(inode);
struct list_head *head = &ci->i_unsafe_dirops;
struct ceph_mds_request *req;
u64 last_tid;
int ret = 0;
dout("dir_fsync %p\n", inode);
spin_lock(&ci->i_unsafe_lock);
if (list_empty(head))
goto out;
req = list_entry(head->prev,
struct ceph_mds_request, r_unsafe_dir_item);
last_tid = req->r_tid;
do {
ceph_mdsc_get_request(req);
spin_unlock(&ci->i_unsafe_lock);
dout("dir_fsync %p wait on tid %llu (until %llu)\n",
inode, req->r_tid, last_tid);
if (req->r_timeout) {
ret = wait_for_completion_timeout(
&req->r_safe_completion, req->r_timeout);
if (ret > 0)
ret = 0;
else if (ret == 0)
ret = -EIO; /* timed out */
} else {
wait_for_completion(&req->r_safe_completion);
}
spin_lock(&ci->i_unsafe_lock);
ceph_mdsc_put_request(req);
if (ret || list_empty(head))
break;
req = list_entry(head->next,
struct ceph_mds_request, r_unsafe_dir_item);
} while (req->r_tid < last_tid);
out:
spin_unlock(&ci->i_unsafe_lock);
return ret;
}
/*
* We maintain a private dentry LRU.
*
* FIXME: this needs to be changed to a per-mds lru to be useful.
*/
void ceph_dentry_lru_add(struct dentry *dn)
{
struct ceph_dentry_info *di = ceph_dentry(dn);
struct ceph_mds_client *mdsc;
ceph: add feature bits to connection handshake (protocol change) Define supported and required feature set. Fail connection if the server requires features we do not support (TAG_FEATURES), or if the server does not support features we require. Signed-off-by: Sage Weil <sage@newdream.net>
2009-12-24 01:30:21 +08:00
dout("dentry_lru_add %p %p '%.*s'\n", di, dn,
dn->d_name.len, dn->d_name.name);
ceph: directory operations Directory operations, including lookup, are defined here. We take advantage of lookup intents when possible. For the most part, we just need to build the proper requests for the metadata server(s) and pass things off to the mds_client. The results of most operations are normally incorporated into the client's cache when the reply is parsed by ceph_fill_trace(). However, if the MDS replies without a trace (e.g., when retrying an update after an MDS failure recovery), some operation-specific cleanup may be needed. We can validate cached dentries in two ways. A per-dentry lease may be issued by the MDS, or a per-directory cap may be issued that acts as a lease on the entire directory. In the latter case, a 'gen' value is used to determine which dentries belong to the currently leased directory contents. We normally prepopulate the dcache and icache with readdir results. This makes subsequent lookups and getattrs avoid any server interaction. It also lets us satisfy readdir operation by peeking at the dcache IFF we hold the per-directory cap/lease, previously performed a readdir, and haven't dropped any of the resulting dentries. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:08 +08:00
if (di) {
ceph: factor out libceph from Ceph file system This factors out protocol and low-level storage parts of ceph into a separate libceph module living in net/ceph and include/linux/ceph. This is mostly a matter of moving files around. However, a few key pieces of the interface change as well: - ceph_client becomes ceph_fs_client and ceph_client, where the latter captures the mon and osd clients, and the fs_client gets the mds client and file system specific pieces. - Mount option parsing and debugfs setup is correspondingly broken into two pieces. - The mon client gets a generic handler callback for otherwise unknown messages (mds map, in this case). - The basic supported/required feature bits can be expanded (and are by ceph_fs_client). No functional change, aside from some subtle error handling cases that got cleaned up in the refactoring process. Signed-off-by: Sage Weil <sage@newdream.net>
2010-04-07 06:14:15 +08:00
mdsc = ceph_sb_to_client(dn->d_sb)->mdsc;
ceph: directory operations Directory operations, including lookup, are defined here. We take advantage of lookup intents when possible. For the most part, we just need to build the proper requests for the metadata server(s) and pass things off to the mds_client. The results of most operations are normally incorporated into the client's cache when the reply is parsed by ceph_fill_trace(). However, if the MDS replies without a trace (e.g., when retrying an update after an MDS failure recovery), some operation-specific cleanup may be needed. We can validate cached dentries in two ways. A per-dentry lease may be issued by the MDS, or a per-directory cap may be issued that acts as a lease on the entire directory. In the latter case, a 'gen' value is used to determine which dentries belong to the currently leased directory contents. We normally prepopulate the dcache and icache with readdir results. This makes subsequent lookups and getattrs avoid any server interaction. It also lets us satisfy readdir operation by peeking at the dcache IFF we hold the per-directory cap/lease, previously performed a readdir, and haven't dropped any of the resulting dentries. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:08 +08:00
spin_lock(&mdsc->dentry_lru_lock);
list_add_tail(&di->lru, &mdsc->dentry_lru);
mdsc->num_dentry++;
spin_unlock(&mdsc->dentry_lru_lock);
}
}
void ceph_dentry_lru_touch(struct dentry *dn)
{
struct ceph_dentry_info *di = ceph_dentry(dn);
struct ceph_mds_client *mdsc;
ceph: set dn offset when spliced We want to assign an offset when the dentry goes from null to linked, which is always done by splice_dentry(). Notably, we should NOT assign an offset when a dentry is first created and is still null. BUG if we try to splice a non-null dentry (we shouldn't). Signed-off-by: Sage Weil <sage@newdream.net>
2010-05-04 13:08:02 +08:00
dout("dentry_lru_touch %p %p '%.*s' (offset %lld)\n", di, dn,
dn->d_name.len, dn->d_name.name, di->offset);
ceph: directory operations Directory operations, including lookup, are defined here. We take advantage of lookup intents when possible. For the most part, we just need to build the proper requests for the metadata server(s) and pass things off to the mds_client. The results of most operations are normally incorporated into the client's cache when the reply is parsed by ceph_fill_trace(). However, if the MDS replies without a trace (e.g., when retrying an update after an MDS failure recovery), some operation-specific cleanup may be needed. We can validate cached dentries in two ways. A per-dentry lease may be issued by the MDS, or a per-directory cap may be issued that acts as a lease on the entire directory. In the latter case, a 'gen' value is used to determine which dentries belong to the currently leased directory contents. We normally prepopulate the dcache and icache with readdir results. This makes subsequent lookups and getattrs avoid any server interaction. It also lets us satisfy readdir operation by peeking at the dcache IFF we hold the per-directory cap/lease, previously performed a readdir, and haven't dropped any of the resulting dentries. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:08 +08:00
if (di) {
ceph: factor out libceph from Ceph file system This factors out protocol and low-level storage parts of ceph into a separate libceph module living in net/ceph and include/linux/ceph. This is mostly a matter of moving files around. However, a few key pieces of the interface change as well: - ceph_client becomes ceph_fs_client and ceph_client, where the latter captures the mon and osd clients, and the fs_client gets the mds client and file system specific pieces. - Mount option parsing and debugfs setup is correspondingly broken into two pieces. - The mon client gets a generic handler callback for otherwise unknown messages (mds map, in this case). - The basic supported/required feature bits can be expanded (and are by ceph_fs_client). No functional change, aside from some subtle error handling cases that got cleaned up in the refactoring process. Signed-off-by: Sage Weil <sage@newdream.net>
2010-04-07 06:14:15 +08:00
mdsc = ceph_sb_to_client(dn->d_sb)->mdsc;
ceph: directory operations Directory operations, including lookup, are defined here. We take advantage of lookup intents when possible. For the most part, we just need to build the proper requests for the metadata server(s) and pass things off to the mds_client. The results of most operations are normally incorporated into the client's cache when the reply is parsed by ceph_fill_trace(). However, if the MDS replies without a trace (e.g., when retrying an update after an MDS failure recovery), some operation-specific cleanup may be needed. We can validate cached dentries in two ways. A per-dentry lease may be issued by the MDS, or a per-directory cap may be issued that acts as a lease on the entire directory. In the latter case, a 'gen' value is used to determine which dentries belong to the currently leased directory contents. We normally prepopulate the dcache and icache with readdir results. This makes subsequent lookups and getattrs avoid any server interaction. It also lets us satisfy readdir operation by peeking at the dcache IFF we hold the per-directory cap/lease, previously performed a readdir, and haven't dropped any of the resulting dentries. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:08 +08:00
spin_lock(&mdsc->dentry_lru_lock);
list_move_tail(&di->lru, &mdsc->dentry_lru);
spin_unlock(&mdsc->dentry_lru_lock);
}
}
void ceph_dentry_lru_del(struct dentry *dn)
{
struct ceph_dentry_info *di = ceph_dentry(dn);
struct ceph_mds_client *mdsc;
ceph: add feature bits to connection handshake (protocol change) Define supported and required feature set. Fail connection if the server requires features we do not support (TAG_FEATURES), or if the server does not support features we require. Signed-off-by: Sage Weil <sage@newdream.net>
2009-12-24 01:30:21 +08:00
dout("dentry_lru_del %p %p '%.*s'\n", di, dn,
dn->d_name.len, dn->d_name.name);
ceph: directory operations Directory operations, including lookup, are defined here. We take advantage of lookup intents when possible. For the most part, we just need to build the proper requests for the metadata server(s) and pass things off to the mds_client. The results of most operations are normally incorporated into the client's cache when the reply is parsed by ceph_fill_trace(). However, if the MDS replies without a trace (e.g., when retrying an update after an MDS failure recovery), some operation-specific cleanup may be needed. We can validate cached dentries in two ways. A per-dentry lease may be issued by the MDS, or a per-directory cap may be issued that acts as a lease on the entire directory. In the latter case, a 'gen' value is used to determine which dentries belong to the currently leased directory contents. We normally prepopulate the dcache and icache with readdir results. This makes subsequent lookups and getattrs avoid any server interaction. It also lets us satisfy readdir operation by peeking at the dcache IFF we hold the per-directory cap/lease, previously performed a readdir, and haven't dropped any of the resulting dentries. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:08 +08:00
if (di) {
ceph: factor out libceph from Ceph file system This factors out protocol and low-level storage parts of ceph into a separate libceph module living in net/ceph and include/linux/ceph. This is mostly a matter of moving files around. However, a few key pieces of the interface change as well: - ceph_client becomes ceph_fs_client and ceph_client, where the latter captures the mon and osd clients, and the fs_client gets the mds client and file system specific pieces. - Mount option parsing and debugfs setup is correspondingly broken into two pieces. - The mon client gets a generic handler callback for otherwise unknown messages (mds map, in this case). - The basic supported/required feature bits can be expanded (and are by ceph_fs_client). No functional change, aside from some subtle error handling cases that got cleaned up in the refactoring process. Signed-off-by: Sage Weil <sage@newdream.net>
2010-04-07 06:14:15 +08:00
mdsc = ceph_sb_to_client(dn->d_sb)->mdsc;
ceph: directory operations Directory operations, including lookup, are defined here. We take advantage of lookup intents when possible. For the most part, we just need to build the proper requests for the metadata server(s) and pass things off to the mds_client. The results of most operations are normally incorporated into the client's cache when the reply is parsed by ceph_fill_trace(). However, if the MDS replies without a trace (e.g., when retrying an update after an MDS failure recovery), some operation-specific cleanup may be needed. We can validate cached dentries in two ways. A per-dentry lease may be issued by the MDS, or a per-directory cap may be issued that acts as a lease on the entire directory. In the latter case, a 'gen' value is used to determine which dentries belong to the currently leased directory contents. We normally prepopulate the dcache and icache with readdir results. This makes subsequent lookups and getattrs avoid any server interaction. It also lets us satisfy readdir operation by peeking at the dcache IFF we hold the per-directory cap/lease, previously performed a readdir, and haven't dropped any of the resulting dentries. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:08 +08:00
spin_lock(&mdsc->dentry_lru_lock);
list_del_init(&di->lru);
mdsc->num_dentry--;
spin_unlock(&mdsc->dentry_lru_lock);
}
}
const struct file_operations ceph_dir_fops = {
.read = ceph_read_dir,
.readdir = ceph_readdir,
.llseek = ceph_dir_llseek,
.open = ceph_open,
.release = ceph_release,
.unlocked_ioctl = ceph_ioctl,
.fsync = ceph_dir_fsync,
};
const struct inode_operations ceph_dir_iops = {
.lookup = ceph_lookup,
.permission = ceph_permission,
.getattr = ceph_getattr,
.setattr = ceph_setattr,
.setxattr = ceph_setxattr,
.getxattr = ceph_getxattr,
.listxattr = ceph_listxattr,
.removexattr = ceph_removexattr,
.mknod = ceph_mknod,
.symlink = ceph_symlink,
.mkdir = ceph_mkdir,
.link = ceph_link,
.unlink = ceph_unlink,
.rmdir = ceph_unlink,
.rename = ceph_rename,
.create = ceph_create,
};
ceph: constify dentry_operations This makes checkpatch happy. Signed-off-by: Sage Weil <sage@newdream.net>
2010-08-04 01:25:30 +08:00
const struct dentry_operations ceph_dentry_ops = {
ceph: directory operations Directory operations, including lookup, are defined here. We take advantage of lookup intents when possible. For the most part, we just need to build the proper requests for the metadata server(s) and pass things off to the mds_client. The results of most operations are normally incorporated into the client's cache when the reply is parsed by ceph_fill_trace(). However, if the MDS replies without a trace (e.g., when retrying an update after an MDS failure recovery), some operation-specific cleanup may be needed. We can validate cached dentries in two ways. A per-dentry lease may be issued by the MDS, or a per-directory cap may be issued that acts as a lease on the entire directory. In the latter case, a 'gen' value is used to determine which dentries belong to the currently leased directory contents. We normally prepopulate the dcache and icache with readdir results. This makes subsequent lookups and getattrs avoid any server interaction. It also lets us satisfy readdir operation by peeking at the dcache IFF we hold the per-directory cap/lease, previously performed a readdir, and haven't dropped any of the resulting dentries. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:08 +08:00
.d_revalidate = ceph_d_revalidate,
.d_release = ceph_dentry_release,
};
ceph: constify dentry_operations This makes checkpatch happy. Signed-off-by: Sage Weil <sage@newdream.net>
2010-08-04 01:25:30 +08:00
const struct dentry_operations ceph_snapdir_dentry_ops = {
ceph: directory operations Directory operations, including lookup, are defined here. We take advantage of lookup intents when possible. For the most part, we just need to build the proper requests for the metadata server(s) and pass things off to the mds_client. The results of most operations are normally incorporated into the client's cache when the reply is parsed by ceph_fill_trace(). However, if the MDS replies without a trace (e.g., when retrying an update after an MDS failure recovery), some operation-specific cleanup may be needed. We can validate cached dentries in two ways. A per-dentry lease may be issued by the MDS, or a per-directory cap may be issued that acts as a lease on the entire directory. In the latter case, a 'gen' value is used to determine which dentries belong to the currently leased directory contents. We normally prepopulate the dcache and icache with readdir results. This makes subsequent lookups and getattrs avoid any server interaction. It also lets us satisfy readdir operation by peeking at the dcache IFF we hold the per-directory cap/lease, previously performed a readdir, and haven't dropped any of the resulting dentries. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:08 +08:00
.d_revalidate = ceph_snapdir_d_revalidate,
ceph: fix d_release dop for snapdir, snapped dentries We need to set the d_release dop for snapdir and snapped dentries so that the ceph_dentry_info struct gets released. We also use the dcache to cache readdir results when possible, which only works if we know when dentries are dropped from the cache. Since we don't use the dcache for readdir in the hidden snapdir, avoid that case in ceph_dentry_release. Signed-off-by: Sage Weil <sage@newdream.net>
2010-07-23 04:49:08 +08:00
.d_release = ceph_dentry_release,
ceph: directory operations Directory operations, including lookup, are defined here. We take advantage of lookup intents when possible. For the most part, we just need to build the proper requests for the metadata server(s) and pass things off to the mds_client. The results of most operations are normally incorporated into the client's cache when the reply is parsed by ceph_fill_trace(). However, if the MDS replies without a trace (e.g., when retrying an update after an MDS failure recovery), some operation-specific cleanup may be needed. We can validate cached dentries in two ways. A per-dentry lease may be issued by the MDS, or a per-directory cap may be issued that acts as a lease on the entire directory. In the latter case, a 'gen' value is used to determine which dentries belong to the currently leased directory contents. We normally prepopulate the dcache and icache with readdir results. This makes subsequent lookups and getattrs avoid any server interaction. It also lets us satisfy readdir operation by peeking at the dcache IFF we hold the per-directory cap/lease, previously performed a readdir, and haven't dropped any of the resulting dentries. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:08 +08:00
};
ceph: constify dentry_operations This makes checkpatch happy. Signed-off-by: Sage Weil <sage@newdream.net>
2010-08-04 01:25:30 +08:00
const struct dentry_operations ceph_snap_dentry_ops = {
ceph: fix d_release dop for snapdir, snapped dentries We need to set the d_release dop for snapdir and snapped dentries so that the ceph_dentry_info struct gets released. We also use the dcache to cache readdir results when possible, which only works if we know when dentries are dropped from the cache. Since we don't use the dcache for readdir in the hidden snapdir, avoid that case in ceph_dentry_release. Signed-off-by: Sage Weil <sage@newdream.net>
2010-07-23 04:49:08 +08:00
.d_release = ceph_dentry_release,
ceph: directory operations Directory operations, including lookup, are defined here. We take advantage of lookup intents when possible. For the most part, we just need to build the proper requests for the metadata server(s) and pass things off to the mds_client. The results of most operations are normally incorporated into the client's cache when the reply is parsed by ceph_fill_trace(). However, if the MDS replies without a trace (e.g., when retrying an update after an MDS failure recovery), some operation-specific cleanup may be needed. We can validate cached dentries in two ways. A per-dentry lease may be issued by the MDS, or a per-directory cap may be issued that acts as a lease on the entire directory. In the latter case, a 'gen' value is used to determine which dentries belong to the currently leased directory contents. We normally prepopulate the dcache and icache with readdir results. This makes subsequent lookups and getattrs avoid any server interaction. It also lets us satisfy readdir operation by peeking at the dcache IFF we hold the per-directory cap/lease, previously performed a readdir, and haven't dropped any of the resulting dentries. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:08 +08:00
};