OpenCloudOS-Kernel/drivers/net/netdevsim/netdevsim.h

384 lines
9.3 KiB
C
Raw Normal View History

/*
* Copyright (C) 2017 Netronome Systems, Inc.
*
* This software is licensed under the GNU General License Version 2,
* June 1991 as shown in the file COPYING in the top-level directory of this
* source tree.
*
* THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES PROVIDE THE PROGRAM "AS IS"
* WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING,
* BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE
* OF THE PROGRAM IS WITH YOU. SHOULD THE PROGRAM PROVE DEFECTIVE, YOU ASSUME
* THE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION.
*/
#include <linux/debugfs.h>
#include <linux/device.h>
#include <linux/ethtool.h>
#include <linux/kernel.h>
#include <linux/list.h>
#include <linux/netdevice.h>
#include <linux/u64_stats_sync.h>
#include <net/devlink.h>
#include <net/udp_tunnel.h>
#include <net/xdp.h>
#define DRV_NAME "netdevsim"
#define NSIM_XDP_MAX_MTU 4000
#define NSIM_EA(extack, msg) NL_SET_ERR_MSG_MOD((extack), msg)
#define NSIM_IPSEC_MAX_SA_COUNT 33
#define NSIM_IPSEC_VALID BIT(31)
#define NSIM_UDP_TUNNEL_N_PORTS 4
struct nsim_sa {
struct xfrm_state *xs;
__be32 ipaddr[4];
u32 key[4];
u32 salt;
bool used;
bool crypt;
bool rx;
};
struct nsim_ipsec {
struct nsim_sa sa[NSIM_IPSEC_MAX_SA_COUNT];
struct dentry *pfile;
u32 count;
u32 tx;
u32 ok;
};
struct nsim_ethtool_pauseparam {
bool rx;
bool tx;
bool report_stats_rx;
bool report_stats_tx;
};
struct nsim_ethtool {
u32 get_err;
u32 set_err;
u32 channels;
struct nsim_ethtool_pauseparam pauseparam;
struct ethtool_coalesce coalesce;
struct ethtool_ringparam ring;
struct ethtool_fecparam fec;
};
struct netdevsim {
struct net_device *netdev;
struct nsim_dev *nsim_dev;
struct nsim_dev_port *nsim_dev_port;
u64 tx_packets;
u64 tx_bytes;
struct u64_stats_sync syncp;
struct nsim_bus_dev *nsim_bus_dev;
struct bpf_prog *bpf_offloaded;
u32 bpf_offloaded_id;
struct xdp_attachment_info xdp;
struct xdp_attachment_info xdp_hw;
bool bpf_tc_accept;
bool bpf_tc_non_bound_accept;
bool bpf_xdpdrv_accept;
bool bpf_xdpoffload_accept;
bool bpf_map_accept;
struct nsim_ipsec ipsec;
struct {
u32 inject_error;
u32 sleep;
u32 __ports[2][NSIM_UDP_TUNNEL_N_PORTS];
u32 (*ports)[NSIM_UDP_TUNNEL_N_PORTS];
struct debugfs_u32_array dfs_ports[2];
} udp_ports;
struct nsim_ethtool ethtool;
};
struct netdevsim *
nsim_create(struct nsim_dev *nsim_dev, struct nsim_dev_port *nsim_dev_port);
void nsim_destroy(struct netdevsim *ns);
void nsim_ethtool_init(struct netdevsim *ns);
void nsim_udp_tunnels_debugfs_create(struct nsim_dev *nsim_dev);
int nsim_udp_tunnels_info_create(struct nsim_dev *nsim_dev,
struct net_device *dev);
void nsim_udp_tunnels_info_destroy(struct net_device *dev);
#ifdef CONFIG_BPF_SYSCALL
int nsim_bpf_dev_init(struct nsim_dev *nsim_dev);
void nsim_bpf_dev_exit(struct nsim_dev *nsim_dev);
int nsim_bpf_init(struct netdevsim *ns);
void nsim_bpf_uninit(struct netdevsim *ns);
int nsim_bpf(struct net_device *dev, struct netdev_bpf *bpf);
int nsim_bpf_disable_tc(struct netdevsim *ns);
int nsim_bpf_setup_tc_block_cb(enum tc_setup_type type,
void *type_data, void *cb_priv);
#else
static inline int nsim_bpf_dev_init(struct nsim_dev *nsim_dev)
{
return 0;
}
static inline void nsim_bpf_dev_exit(struct nsim_dev *nsim_dev)
{
}
static inline int nsim_bpf_init(struct netdevsim *ns)
{
return 0;
}
static inline void nsim_bpf_uninit(struct netdevsim *ns)
{
}
static inline int nsim_bpf(struct net_device *dev, struct netdev_bpf *bpf)
{
return -EOPNOTSUPP;
}
static inline int nsim_bpf_disable_tc(struct netdevsim *ns)
{
return 0;
}
static inline int
nsim_bpf_setup_tc_block_cb(enum tc_setup_type type, void *type_data,
void *cb_priv)
{
return -EOPNOTSUPP;
}
#endif
netdevsim: Add simple FIB resource controller via devlink Add devlink support to netdevsim and use it to implement a simple, profile based resource controller. Only one controller is needed per namespace, so the first netdevsim netdevice in a namespace registers with devlink. If that device is deleted, the resource settings are deleted. The resource controller allows a user to limit the number of IPv4 and IPv6 FIB entries and FIB rules. The resource paths are: /IPv4 /IPv4/fib /IPv4/fib-rules /IPv6 /IPv6/fib /IPv6/fib-rules The IPv4 and IPv6 top level resources are unlimited in size and can not be changed. From there, the number of FIB entries and FIB rule entries are unlimited by default. A user can specify a limit for the fib and fib-rules resources: $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib size 96 $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib-rules size 16 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib size 64 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib-rules size 16 $ devlink dev reload netdevsim/netdevsim0 such that the number of rules or routes is limited (96 ipv4 routes in the example above): $ for n in $(seq 1 32); do ip ro add 10.99.$n.0/24 dev eth1; done Error: netdevsim: Exceeded number of supported fib entries. $ devlink resource show netdevsim/netdevsim0 netdevsim/netdevsim0: name IPv4 size unlimited unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables non resources: name fib size 96 occ 96 unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables ... With this template in place for resource management, it is fairly trivial to extend and shows one way to implement a simple counter based resource controller typical of network profiles. Currently, devlink only supports initial namespace. Code is in place to adapt netdevsim to a per namespace controller once the network namespace issues are resolved. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-28 09:22:00 +08:00
enum nsim_resource_id {
NSIM_RESOURCE_NONE, /* DEVLINK_RESOURCE_ID_PARENT_TOP */
NSIM_RESOURCE_IPV4,
NSIM_RESOURCE_IPV4_FIB,
NSIM_RESOURCE_IPV4_FIB_RULES,
NSIM_RESOURCE_IPV6,
NSIM_RESOURCE_IPV6_FIB,
NSIM_RESOURCE_IPV6_FIB_RULES,
NSIM_RESOURCE_NEXTHOPS,
netdevsim: Add simple FIB resource controller via devlink Add devlink support to netdevsim and use it to implement a simple, profile based resource controller. Only one controller is needed per namespace, so the first netdevsim netdevice in a namespace registers with devlink. If that device is deleted, the resource settings are deleted. The resource controller allows a user to limit the number of IPv4 and IPv6 FIB entries and FIB rules. The resource paths are: /IPv4 /IPv4/fib /IPv4/fib-rules /IPv6 /IPv6/fib /IPv6/fib-rules The IPv4 and IPv6 top level resources are unlimited in size and can not be changed. From there, the number of FIB entries and FIB rule entries are unlimited by default. A user can specify a limit for the fib and fib-rules resources: $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib size 96 $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib-rules size 16 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib size 64 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib-rules size 16 $ devlink dev reload netdevsim/netdevsim0 such that the number of rules or routes is limited (96 ipv4 routes in the example above): $ for n in $(seq 1 32); do ip ro add 10.99.$n.0/24 dev eth1; done Error: netdevsim: Exceeded number of supported fib entries. $ devlink resource show netdevsim/netdevsim0 netdevsim/netdevsim0: name IPv4 size unlimited unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables non resources: name fib size 96 occ 96 unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables ... With this template in place for resource management, it is fairly trivial to extend and shows one way to implement a simple counter based resource controller typical of network profiles. Currently, devlink only supports initial namespace. Code is in place to adapt netdevsim to a per namespace controller once the network namespace issues are resolved. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-28 09:22:00 +08:00
};
struct nsim_dev_health {
struct devlink_health_reporter *empty_reporter;
struct devlink_health_reporter *dummy_reporter;
struct dentry *ddir;
char *recovered_break_msg;
u32 binary_len;
bool fail_recover;
};
int nsim_dev_health_init(struct nsim_dev *nsim_dev, struct devlink *devlink);
void nsim_dev_health_exit(struct nsim_dev *nsim_dev);
struct nsim_dev_hwstats_netdev {
struct list_head list;
struct net_device *netdev;
struct rtnl_hw_stats64 stats;
bool enabled;
bool fail_enable;
};
struct nsim_dev_hwstats {
struct dentry *ddir;
struct dentry *l3_ddir;
struct mutex hwsdev_list_lock; /* protects hwsdev list(s) */
struct list_head l3_list;
struct notifier_block netdevice_nb;
struct delayed_work traffic_dw;
};
int nsim_dev_hwstats_init(struct nsim_dev *nsim_dev);
void nsim_dev_hwstats_exit(struct nsim_dev *nsim_dev);
#if IS_ENABLED(CONFIG_PSAMPLE)
int nsim_dev_psample_init(struct nsim_dev *nsim_dev);
void nsim_dev_psample_exit(struct nsim_dev *nsim_dev);
#else
static inline int nsim_dev_psample_init(struct nsim_dev *nsim_dev)
{
return 0;
}
static inline void nsim_dev_psample_exit(struct nsim_dev *nsim_dev)
{
}
#endif
enum nsim_dev_port_type {
NSIM_DEV_PORT_TYPE_PF,
NSIM_DEV_PORT_TYPE_VF,
};
#define NSIM_DEV_VF_PORT_INDEX_BASE 128
#define NSIM_DEV_VF_PORT_INDEX_MAX UINT_MAX
struct nsim_dev_port {
struct list_head list;
struct devlink_port devlink_port;
unsigned int port_index;
enum nsim_dev_port_type port_type;
struct dentry *ddir;
struct dentry *rate_parent;
char *parent_name;
struct netdevsim *ns;
};
struct nsim_vf_config {
int link_state;
u16 min_tx_rate;
u16 max_tx_rate;
u16 vlan;
__be16 vlan_proto;
u16 qos;
u8 vf_mac[ETH_ALEN];
bool spoofchk_enabled;
bool trusted;
bool rss_query_enabled;
};
struct nsim_dev {
struct nsim_bus_dev *nsim_bus_dev;
struct nsim_fib_data *fib_data;
struct nsim_trap_data *trap_data;
struct dentry *ddir;
struct dentry *ports_ddir;
netdevsim: fix panic in nsim_dev_take_snapshot_write() nsim_dev_take_snapshot_write() uses nsim_dev and nsim_dev->dummy_region. So, during this function, these data shouldn't be removed. But there is no protecting stuff in this function. There are two similar cases. 1. reload case reload could be called during nsim_dev_take_snapshot_write(). When reload is being executed, nsim_dev_reload_down() is called and it calls nsim_dev_reload_destroy(). nsim_dev_reload_destroy() calls devlink_region_destroy() to destroy nsim_dev->dummy_region. So, during nsim_dev_take_snapshot_write(), nsim_dev->dummy_region() would be removed. At this point, snapshot_write() would access freed pointer. In order to fix this case, take_snapshot file will be removed before devlink_region_destroy(). The take_snapshot file will be re-created by ->reload_up(). 2. del_device_store case del_device_store() also could call nsim_dev_reload_destroy() during nsim_dev_take_snapshot_write(). If so, panic would occur. This problem is actually the same problem with the first case. So, this problem will be fixed by the first case's solution. Test commands: modprobe netdevsim while : do echo 1 > /sys/bus/netdevsim/new_device & echo 1 > /sys/bus/netdevsim/del_device & devlink dev reload netdevsim/netdevsim1 & echo 1 > /sys/kernel/debug/netdevsim/netdevsim1/take_snapshot & done Splat looks like: [ 45.564513][ T975] general protection fault, probably for non-canonical address 0xdffffc000000003a: 0000 [#1] SMP DEI [ 45.566131][ T975] KASAN: null-ptr-deref in range [0x00000000000001d0-0x00000000000001d7] [ 45.566135][ T975] CPU: 1 PID: 975 Comm: bash Not tainted 5.5.0+ #322 [ 45.569020][ T975] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006 [ 45.569026][ T975] RIP: 0010:__mutex_lock+0x10a/0x14b0 [ 45.570518][ T975] Code: 08 84 d2 0f 85 7f 12 00 00 44 8b 0d 10 23 65 02 45 85 c9 75 29 49 8d 7f 68 48 b8 00 00 00 0f [ 45.570522][ T975] RSP: 0018:ffff888046ccfbf0 EFLAGS: 00010206 [ 45.572305][ T975] RAX: dffffc0000000000 RBX: 0000000000000000 RCX: 0000000000000000 [ 45.572308][ T975] RDX: 000000000000003a RSI: ffffffffac926440 RDI: 00000000000001d0 [ 45.576843][ T975] RBP: ffff888046ccfd70 R08: ffffffffab610645 R09: 0000000000000000 [ 45.576847][ T975] R10: ffff888046ccfd90 R11: ffffed100d6360ad R12: 0000000000000000 [ 45.578471][ T975] R13: dffffc0000000000 R14: ffffffffae1976c0 R15: 0000000000000168 [ 45.578475][ T975] FS: 00007f614d6e7740(0000) GS:ffff88806c400000(0000) knlGS:0000000000000000 [ 45.581492][ T975] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 45.582942][ T975] CR2: 00005618677d1cf0 CR3: 000000005fb9c002 CR4: 00000000000606e0 [ 45.584543][ T975] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 45.586633][ T975] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 45.589889][ T975] Call Trace: [ 45.591445][ T975] ? devlink_region_snapshot_create+0x55/0x4a0 [ 45.601250][ T975] ? mutex_lock_io_nested+0x1380/0x1380 [ 45.602817][ T975] ? mutex_lock_io_nested+0x1380/0x1380 [ 45.603875][ T975] ? mark_held_locks+0xa5/0xe0 [ 45.604769][ T975] ? _raw_spin_unlock_irqrestore+0x2d/0x50 [ 45.606147][ T975] ? __mutex_unlock_slowpath+0xd0/0x670 [ 45.607723][ T975] ? crng_backtrack_protect+0x80/0x80 [ 45.613530][ T975] ? wait_for_completion+0x390/0x390 [ 45.615152][ T975] ? devlink_region_snapshot_create+0x55/0x4a0 [ 45.616834][ T975] devlink_region_snapshot_create+0x55/0x4a0 [ ... ] Fixes: 4418f862d675 ("netdevsim: implement support for devlink region and snapshots") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-02-02 00:43:13 +08:00
struct dentry *take_snapshot;
struct dentry *nodes_ddir;
struct nsim_vf_config *vfconfigs;
struct bpf_offload_dev *bpf_dev;
bool bpf_bind_accept;
bool bpf_bind_verifier_accept;
u32 bpf_bind_verifier_delay;
struct dentry *ddir_bpf_bound_progs;
u32 prog_id_gen;
struct list_head bpf_bound_progs;
struct list_head bpf_bound_maps;
struct netdev_phys_item_id switch_id;
struct list_head port_list;
bool fw_update_status;
u32 fw_update_overwrite_mask;
u32 max_macs;
bool test1;
bool dont_allow_reload;
bool fail_reload;
struct devlink_region *dummy_region;
struct nsim_dev_health health;
struct nsim_dev_hwstats hwstats;
struct flow_action_cookie *fa_cookie;
spinlock_t fa_cookie_lock; /* protects fa_cookie */
bool fail_trap_group_set;
bool fail_trap_policer_set;
bool fail_trap_policer_counter_get;
bool fail_trap_drop_counter_get;
struct {
struct udp_tunnel_nic_shared utn_shared;
u32 __ports[2][NSIM_UDP_TUNNEL_N_PORTS];
bool sync_all;
bool open_only;
bool ipv4_only;
bool shared;
bool static_iana_vxlan;
u32 sleep;
} udp_ports;
struct nsim_dev_psample *psample;
u16 esw_mode;
};
static inline bool nsim_esw_mode_is_legacy(struct nsim_dev *nsim_dev)
{
return nsim_dev->esw_mode == DEVLINK_ESWITCH_MODE_LEGACY;
}
static inline bool nsim_esw_mode_is_switchdev(struct nsim_dev *nsim_dev)
{
return nsim_dev->esw_mode == DEVLINK_ESWITCH_MODE_SWITCHDEV;
}
static inline struct net *nsim_dev_net(struct nsim_dev *nsim_dev)
{
return devlink_net(priv_to_devlink(nsim_dev));
}
int nsim_dev_init(void);
void nsim_dev_exit(void);
int nsim_drv_probe(struct nsim_bus_dev *nsim_bus_dev);
void nsim_drv_remove(struct nsim_bus_dev *nsim_bus_dev);
int nsim_drv_port_add(struct nsim_bus_dev *nsim_bus_dev,
enum nsim_dev_port_type type,
unsigned int port_index);
int nsim_drv_port_del(struct nsim_bus_dev *nsim_bus_dev,
enum nsim_dev_port_type type,
unsigned int port_index);
int nsim_drv_configure_vfs(struct nsim_bus_dev *nsim_bus_dev,
unsigned int num_vfs);
netdevsim: Add simple FIB resource controller via devlink Add devlink support to netdevsim and use it to implement a simple, profile based resource controller. Only one controller is needed per namespace, so the first netdevsim netdevice in a namespace registers with devlink. If that device is deleted, the resource settings are deleted. The resource controller allows a user to limit the number of IPv4 and IPv6 FIB entries and FIB rules. The resource paths are: /IPv4 /IPv4/fib /IPv4/fib-rules /IPv6 /IPv6/fib /IPv6/fib-rules The IPv4 and IPv6 top level resources are unlimited in size and can not be changed. From there, the number of FIB entries and FIB rule entries are unlimited by default. A user can specify a limit for the fib and fib-rules resources: $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib size 96 $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib-rules size 16 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib size 64 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib-rules size 16 $ devlink dev reload netdevsim/netdevsim0 such that the number of rules or routes is limited (96 ipv4 routes in the example above): $ for n in $(seq 1 32); do ip ro add 10.99.$n.0/24 dev eth1; done Error: netdevsim: Exceeded number of supported fib entries. $ devlink resource show netdevsim/netdevsim0 netdevsim/netdevsim0: name IPv4 size unlimited unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables non resources: name fib size 96 occ 96 unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables ... With this template in place for resource management, it is fairly trivial to extend and shows one way to implement a simple counter based resource controller typical of network profiles. Currently, devlink only supports initial namespace. Code is in place to adapt netdevsim to a per namespace controller once the network namespace issues are resolved. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-28 09:22:00 +08:00
unsigned int nsim_dev_get_vfs(struct nsim_dev *nsim_dev);
struct nsim_fib_data *nsim_fib_create(struct devlink *devlink,
struct netlink_ext_ack *extack);
void nsim_fib_destroy(struct devlink *devlink, struct nsim_fib_data *fib_data);
u64 nsim_fib_get_val(struct nsim_fib_data *fib_data,
enum nsim_resource_id res_id, bool max);
netdevsim: Add simple FIB resource controller via devlink Add devlink support to netdevsim and use it to implement a simple, profile based resource controller. Only one controller is needed per namespace, so the first netdevsim netdevice in a namespace registers with devlink. If that device is deleted, the resource settings are deleted. The resource controller allows a user to limit the number of IPv4 and IPv6 FIB entries and FIB rules. The resource paths are: /IPv4 /IPv4/fib /IPv4/fib-rules /IPv6 /IPv6/fib /IPv6/fib-rules The IPv4 and IPv6 top level resources are unlimited in size and can not be changed. From there, the number of FIB entries and FIB rule entries are unlimited by default. A user can specify a limit for the fib and fib-rules resources: $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib size 96 $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib-rules size 16 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib size 64 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib-rules size 16 $ devlink dev reload netdevsim/netdevsim0 such that the number of rules or routes is limited (96 ipv4 routes in the example above): $ for n in $(seq 1 32); do ip ro add 10.99.$n.0/24 dev eth1; done Error: netdevsim: Exceeded number of supported fib entries. $ devlink resource show netdevsim/netdevsim0 netdevsim/netdevsim0: name IPv4 size unlimited unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables non resources: name fib size 96 occ 96 unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables ... With this template in place for resource management, it is fairly trivial to extend and shows one way to implement a simple counter based resource controller typical of network profiles. Currently, devlink only supports initial namespace. Code is in place to adapt netdevsim to a per namespace controller once the network namespace issues are resolved. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-28 09:22:00 +08:00
static inline bool nsim_dev_port_is_pf(struct nsim_dev_port *nsim_dev_port)
{
return nsim_dev_port->port_type == NSIM_DEV_PORT_TYPE_PF;
}
static inline bool nsim_dev_port_is_vf(struct nsim_dev_port *nsim_dev_port)
{
return nsim_dev_port->port_type == NSIM_DEV_PORT_TYPE_VF;
}
#if IS_ENABLED(CONFIG_XFRM_OFFLOAD)
void nsim_ipsec_init(struct netdevsim *ns);
void nsim_ipsec_teardown(struct netdevsim *ns);
bool nsim_ipsec_tx(struct netdevsim *ns, struct sk_buff *skb);
#else
static inline void nsim_ipsec_init(struct netdevsim *ns)
{
}
static inline void nsim_ipsec_teardown(struct netdevsim *ns)
{
}
static inline bool nsim_ipsec_tx(struct netdevsim *ns, struct sk_buff *skb)
{
return true;
}
#endif
struct nsim_bus_dev {
struct device dev;
struct list_head list;
unsigned int port_count;
unsigned int num_queues; /* Number of queues for each port on this bus */
struct net *initial_net; /* Purpose of this is to carry net pointer
* during the probe time only.
*/
unsigned int max_vfs;
unsigned int num_vfs;
netdevsim: fix using uninitialized resources When module is being initialized, __init() calls bus_register() and driver_register(). These functions internally create various resources and sysfs files. The sysfs files are used for basic operations(add/del device). /sys/bus/netdevsim/new_device /sys/bus/netdevsim/del_device These sysfs files use netdevsim resources, they are mostly allocated and initialized in ->probe() function, which is nsim_dev_probe(). But, sysfs files could be executed before ->probe() is finished. So, accessing uninitialized data would occur. Another problem is very similar. /sys/bus/netdevsim/new_device internally creates sysfs files. /sys/devices/netdevsim<id>/new_port /sys/devices/netdevsim<id>/del_port These sysfs files also use netdevsim resources, they are mostly allocated and initialized in creating device routine, which is nsim_bus_dev_new(). But they also could be executed before nsim_bus_dev_new() is finished. So, accessing uninitialized data would occur. To fix these problems, this patch adds flags, which means whether the operation is finished or not. The flag variable 'nsim_bus_enable' means whether netdevsim bus was initialized or not. This is protected by nsim_bus_dev_list_lock. The flag variable 'nsim_bus_dev->init' means whether nsim_bus_dev was initialized or not. This could be used in {new/del}_port_store() with no lock. Test commands: #SHELL1 modprobe netdevsim while : do echo "1 1" > /sys/bus/netdevsim/new_device echo "1 1" > /sys/bus/netdevsim/del_device done #SHELL2 while : do echo 1 > /sys/devices/netdevsim1/new_port echo 1 > /sys/devices/netdevsim1/del_port done Splat looks like: [ 47.508954][ T1008] general protection fault, probably for non-canonical address 0xdffffc0000000021: 0000 I [ 47.510793][ T1008] KASAN: null-ptr-deref in range [0x0000000000000108-0x000000000000010f] [ 47.511963][ T1008] CPU: 2 PID: 1008 Comm: bash Not tainted 5.5.0+ #322 [ 47.512823][ T1008] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006 [ 47.514041][ T1008] RIP: 0010:__mutex_lock+0x10a/0x14b0 [ 47.514699][ T1008] Code: 08 84 d2 0f 85 7f 12 00 00 44 8b 0d 10 23 65 02 45 85 c9 75 29 49 8d 7f 68 48 b8 00 00 00 0f [ 47.517163][ T1008] RSP: 0018:ffff888059b4fbb0 EFLAGS: 00010206 [ 47.517802][ T1008] RAX: dffffc0000000000 RBX: 0000000000000000 RCX: 0000000000000000 [ 47.518941][ T1008] RDX: 0000000000000021 RSI: ffffffff85926440 RDI: 0000000000000108 [ 47.519732][ T1008] RBP: ffff888059b4fd30 R08: ffffffffc073fad0 R09: 0000000000000000 [ 47.520729][ T1008] R10: ffff888059b4fd50 R11: ffff88804bb38040 R12: 0000000000000000 [ 47.521702][ T1008] R13: dffffc0000000000 R14: ffffffff871976c0 R15: 00000000000000a0 [ 47.522760][ T1008] FS: 00007fd4be05a740(0000) GS:ffff88806c800000(0000) knlGS:0000000000000000 [ 47.523877][ T1008] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 47.524627][ T1008] CR2: 0000561c82b69cf0 CR3: 0000000065dd6004 CR4: 00000000000606e0 [ 47.527662][ T1008] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 47.528604][ T1008] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 47.529531][ T1008] Call Trace: [ 47.529874][ T1008] ? nsim_dev_port_add+0x50/0x150 [netdevsim] [ 47.530470][ T1008] ? mutex_lock_io_nested+0x1380/0x1380 [ 47.531018][ T1008] ? _kstrtoull+0x76/0x160 [ 47.531449][ T1008] ? _parse_integer+0xf0/0xf0 [ 47.531874][ T1008] ? kernfs_fop_write+0x1cf/0x410 [ 47.532330][ T1008] ? sysfs_file_ops+0x160/0x160 [ 47.532773][ T1008] ? kstrtouint+0x86/0x110 [ 47.533168][ T1008] ? nsim_dev_port_add+0x50/0x150 [netdevsim] [ 47.533721][ T1008] nsim_dev_port_add+0x50/0x150 [netdevsim] [ 47.534336][ T1008] ? sysfs_file_ops+0x160/0x160 [ 47.534858][ T1008] new_port_store+0x99/0xb0 [netdevsim] [ 47.535439][ T1008] ? del_port_store+0xb0/0xb0 [netdevsim] [ 47.536035][ T1008] ? sysfs_file_ops+0x112/0x160 [ 47.536544][ T1008] ? sysfs_kf_write+0x3b/0x180 [ 47.537029][ T1008] kernfs_fop_write+0x276/0x410 [ 47.537548][ T1008] ? __sb_start_write+0x215/0x2e0 [ 47.538110][ T1008] vfs_write+0x197/0x4a0 [ ... ] Fixes: f9d9db47d3ba ("netdevsim: add bus attributes to add new and delete devices") Fixes: 794b2c05ca1c ("netdevsim: extend device attrs to support port addition and deletion") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-02-02 00:42:54 +08:00
bool init;
};
int nsim_bus_init(void);
void nsim_bus_exit(void);