OpenCloudOS-Kernel/arch/x86/xen/apic.c

209 lines
4.5 KiB
C
Raw Normal View History

License cleanup: add SPDX GPL-2.0 license identifier to files with no license Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-01 22:07:57 +08:00
// SPDX-License-Identifier: GPL-2.0
#include <linux/init.h>
2020-08-06 20:35:11 +08:00
#include <linux/thread_info.h>
#include <asm/x86_init.h>
#include <asm/apic.h>
#include <asm/io_apic.h>
#include <asm/xen/hypercall.h>
#include <xen/xen.h>
#include <xen/interface/physdev.h>
#include "xen-ops.h"
#include "pmu.h"
#include "smp.h"
static unsigned int xen_io_apic_read(unsigned apic, unsigned reg)
{
struct physdev_apic apic_op;
int ret;
apic_op.apic_physbase = mpc_ioapic_addr(apic);
apic_op.reg = reg;
ret = HYPERVISOR_physdev_op(PHYSDEVOP_apic_read, &apic_op);
if (!ret)
return apic_op.value;
/* fallback to return an emulated IO_APIC values */
if (reg == 0x1)
return 0x00170020;
else if (reg == 0x0)
return apic << 24;
return 0xfd;
}
static u32 xen_set_apic_id(unsigned int x)
{
WARN_ON(1);
return x;
}
static unsigned int xen_get_apic_id(unsigned long x)
{
return ((x)>>24) & 0xFFu;
}
static u32 xen_apic_read(u32 reg)
{
struct xen_platform_op op = {
.cmd = XENPF_get_cpuinfo,
.interface_version = XENPF_INTERFACE_VERSION,
.u.pcpu_info.xen_cpuid = 0,
};
int ret = 0;
/* Shouldn't need this as APIC is turned off for PV, and we only
* get called on the bootup processor. But just in case. */
if (!xen_initial_domain() || smp_processor_id())
return 0;
if (reg == APIC_LVR)
return 0x14;
if (reg != APIC_ID)
return 0;
ret = HYPERVISOR_platform_op(&op);
if (ret)
op.u.pcpu_info.apic_id = BAD_APICID;
return op.u.pcpu_info.apic_id << 24;
}
static void xen_apic_write(u32 reg, u32 val)
{
if (reg == APIC_LVTPC) {
(void)pmu_apic_update(reg);
return;
}
/* Warn to see if there's any stray references */
WARN(1,"register: %x, value: %x\n", reg, val);
}
static u64 xen_apic_icr_read(void)
{
return 0;
}
static void xen_apic_icr_write(u32 low, u32 id)
{
/* Warn to see if there's any stray references */
WARN_ON(1);
}
static u32 xen_safe_apic_wait_icr_idle(void)
{
return 0;
}
static int xen_apic_probe_pv(void)
{
if (xen_pv_domain())
return 1;
return 0;
}
static int xen_madt_oem_check(char *oem_id, char *oem_table_id)
{
return xen_pv_domain();
}
static int xen_id_always_valid(u32 apicid)
{
return 1;
}
static int xen_id_always_registered(void)
{
return 1;
}
static int xen_phys_pkg_id(int initial_apic_id, int index_msb)
{
return initial_apic_id >> index_msb;
}
static void xen_noop(void)
{
}
static void xen_silent_inquire(int apicid)
{
}
static int xen_cpu_present_to_apicid(int cpu)
{
if (cpu_present(cpu))
x86/xen: Fix APIC id mismatch warning on Intel This patch fixes the following warning message seen when booting the kernel as Dom0 with Xen on Intel machines. [0.003000] [Firmware Bug]: CPU1: APIC id mismatch. Firmware: 0 APIC: 1] The code generating the warning in validate_apic_and_package_id() matches cpu_data(cpu).apicid (initialized in init_intel()-> detect_extended_topology() using cpuid) against the apicid returned from xen_apic_read(). Now, xen_apic_read() makes a hypercall to retrieve apicid for the boot cpu but returns 0 otherwise. Hence the warning gets thrown for all but the boot cpu. The idea behind xen_apic_read() returning 0 for apicid is that the guests (even Dom0) should not need to know what physical processor their vcpus are running on. This is because we currently do not have topology information in Xen and also because xen allows more vcpus than physical processors. However, boot cpu's apicid is required for loading xen-acpi-processor driver on AMD machines. Look at following patch for details: commit 558daa289a40 ("xen/apic: Return the APIC ID (and version) for CPU 0.") So to get rid of the warning, this patch modifies xen_cpu_present_to_apicid() to return cpu_data(cpu).apicid instead of calling xen_apic_read(). The warning is not seen on AMD machines because init_amd() populates cpu_data(cpu).apicid by calling hard_smp_processor_id()->xen_apic_read() as opposed to using apicid from cpuid as is done on Intel machines. Signed-off-by: Mohit Gambhir <mohit.gambhir@oracle.com> Reviewed-by: Juergen Gross <jgross@suse.com> Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
2017-01-27 02:12:27 +08:00
return cpu_data(cpu).apicid;
else
return BAD_APICID;
}
static struct apic xen_pv_apic = {
.name = "Xen PV",
.probe = xen_apic_probe_pv,
.acpi_madt_oem_check = xen_madt_oem_check,
.apic_id_valid = xen_id_always_valid,
.apic_id_registered = xen_id_always_registered,
/* .delivery_mode and .dest_mode_logical not used by XENPV */
.disable_esr = 0,
.check_apicid_used = default_check_apicid_used, /* Used on 32-bit */
.init_apic_ldr = xen_noop, /* setup_local_APIC calls it */
.ioapic_phys_id_map = default_ioapic_phys_id_map, /* Used on 32-bit */
.setup_apic_routing = NULL,
.cpu_present_to_apicid = xen_cpu_present_to_apicid,
.apicid_to_cpu_present = physid_set_mask_of_physid, /* Used on 32-bit */
.check_phys_apicid_present = default_check_phys_apicid_present, /* smp_sanity_check needs it */
.phys_pkg_id = xen_phys_pkg_id, /* detect_ht */
.get_apic_id = xen_get_apic_id,
.set_apic_id = xen_set_apic_id, /* Can be NULL on 32-bit. */
.calc_dest_apicid = apic_flat_calc_apicid,
#ifdef CONFIG_SMP
.send_IPI_mask = xen_send_IPI_mask,
.send_IPI_mask_allbutself = xen_send_IPI_mask_allbutself,
.send_IPI_allbutself = xen_send_IPI_allbutself,
.send_IPI_all = xen_send_IPI_all,
.send_IPI_self = xen_send_IPI_self,
#endif
/* .wait_for_init_deassert- used by AP bootup - smp_callin which we don't use */
.inquire_remote_apic = xen_silent_inquire,
.read = xen_apic_read,
.write = xen_apic_write,
.eoi_write = xen_apic_write,
.icr_read = xen_apic_icr_read,
.icr_write = xen_apic_icr_write,
.wait_icr_idle = xen_noop,
.safe_wait_icr_idle = xen_safe_apic_wait_icr_idle,
};
static void __init xen_apic_check(void)
{
if (apic == &xen_pv_apic)
return;
pr_info("Switched APIC routing from %s to %s.\n", apic->name,
xen_pv_apic.name);
apic = &xen_pv_apic;
}
void __init xen_init_apic(void)
{
x86_apic_ops.io_apic_read = xen_io_apic_read;
/* On PV guests the APIC CPUID bit is disabled so none of the
* routines end up executing. */
if (!xen_initial_domain())
apic = &xen_pv_apic;
x86_platform.apic_post_init = xen_apic_check;
}
apic_driver(xen_pv_apic);