OpenCloudOS-Kernel/drivers/reset/sti/Makefile

obj-$(CONFIG_STI_RESET_SYSCFG) += reset-syscfg.o

obj-$(CONFIG_STIH415_RESET) += reset-stih415.o
obj-$(CONFIG_STIH416_RESET) += reset-stih416.o
obj-$(CONFIG_STIH407_RESET) += reset-stih407.o
drivers: reset: STi SoC system configuration reset controller support This patch adds a reset controller implementation for STMicroelectronics STi family SoCs; it allows a group of related reset like controls found in multiple system configuration registers to be represented by a single controller device. System configuration registers are accessed through the regmap framework and the mfd/syscon driver. The implementation optionally supports waiting for the reset action to be acknowledged in a separate status register and supports both active high and active low reset lines. These properties are common across all the reset channels in a specific reset controller instance, hence all channels in a paritcular controller are expected to behave in the same way. Signed-off-by: Stephen Gallimore <stephen.gallimore@st.com> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@st.com> Acked-by: Philipp Zabel <p.zabel@pengutronix.de> 2013-08-07 22:53:12 +08:00			`obj-$(CONFIG_STI_RESET_SYSCFG) += reset-syscfg.o`
drivers: reset: Reset controller driver for STiH415 This patch adds a reset controller platform driver for the STiH415 SoC. This initial version provides a compatible driver for the "st,stih415-powerdown" device, which registers a system configuration register based reset controller that controls the powerdown state of hardware such as the on-chip USB host controllers. Signed-off-by: Stephen Gallimore <stephen.gallimore@st.com> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@st.com> Acked-by: Philipp Zabel <p.zabel@pengutronix.de> 2013-08-07 23:31:25 +08:00
			`obj-$(CONFIG_STIH415_RESET) += reset-stih415.o`
drivers: reset: Reset controller driver for STiH416 This patch adds a reset controller platform driver for the STiH416 SoC. This initial version provides a compatible driver for the "st,stih416-powerdown" device, which registers a system configuration register based reset controller that controls the powerdown state of hardware such as the on-chip USB host controllers. Signed-off-by: Stephen Gallimore <stephen.gallimore@st.com> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@st.com> Acked-by: Philipp Zabel <p.zabel@pengutronix.de> 2013-08-07 23:57:26 +08:00			`obj-$(CONFIG_STIH416_RESET) += reset-stih416.o`
reset: stih407: Add softreset, powerdown and picophy controllers This patch adds softreset, powerdown and picophy reset controllers for the STiH407 SoC. With this patch three new devices are registered: - 1. st,stih407-powerdown 2. st,stih407-softreset 3. st,stih407-picophyreset All three devices use system configuration registers mapped via regmap to perform the reset or powerdown. The powerdown controller also has an acknowledgement. A separate picophy reset controller manages the different reset channels within the picophy, which have a different polarity to the other system softresets. Managing these different picophy softreset channels is necessary to correctly handle resuming from suspend when USB2 devices are plugged into the USB3 port. Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: Peter Griffin <peter.griffin@linaro.org> Acked-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Maxime Coquelin <maxime.coquelin@st.com> 2014-07-02 22:08:46 +08:00			`obj-$(CONFIG_STIH407_RESET) += reset-stih407.o`