OpenCloudOS-Kernel/drivers/mfd/intel_soc_pmic_core.c

161 lines
3.9 KiB
C
Raw Normal View History

// SPDX-License-Identifier: GPL-2.0
/*
* Intel SoC PMIC MFD Driver
*
* Copyright (C) 2013, 2014 Intel Corporation. All rights reserved.
*
* Author: Yang, Bin <bin.yang@intel.com>
* Author: Zhu, Lejun <lejun.zhu@linux.intel.com>
*/
#include <linux/acpi.h>
#include <linux/i2c.h>
#include <linux/interrupt.h>
#include <linux/module.h>
#include <linux/mfd/core.h>
#include <linux/mfd/intel_soc_pmic.h>
#include <linux/platform_data/x86/soc.h>
#include <linux/pwm.h>
#include <linux/regmap.h>
#include "intel_soc_pmic_core.h"
/* PWM consumed by the Intel GFX */
static struct pwm_lookup crc_pwm_lookup[] = {
mfd: intel_soc_pmic: Rename pwm_backlight pwm-lookup to pwm_pmic_backlight At least Bay Trail (BYT) and Cherry Trail (CHT) devices can use 1 of 2 different PWM controllers for controlling the LCD's backlight brightness. Either the one integrated into the PMIC or the one integrated into the SoC (the 1st LPSS PWM controller). So far in the LPSS code on BYT we have skipped registering the LPSS PWM controller "pwm_backlight" lookup entry when a Crystal Cove PMIC is present, assuming that in this case the PMIC PWM controller will be used. On CHT we have been relying on only 1 of the 2 PWM controllers being enabled in the DSDT at the same time; and always registered the lookup. So far this has been working, but the correct way to determine which PWM controller needs to be used is by checking a bit in the VBT table and recently I've learned about 2 different BYT devices: Point of View MOBII TAB-P800W Acer Switch 10 SW5-012 Which use a Crystal Cove PMIC, yet the LCD is connected to the SoC/LPSS PWM controller (and the VBT correctly indicates this), so here our old heuristics fail. Since only the i915 driver has access to the VBT, this commit renames the "pwm_backlight" lookup entries for the Crystal Cove PMIC's PWM controller to "pwm_pmic_backlight" so that the i915 driver can do a pwm_get() for the right controller depending on the VBT bit, instead of the i915 driver relying on a "pwm_backlight" lookup getting registered which magically points to the right controller. Acked-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Lee Jones <lee.jones@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20191216202906.1662893-3-hdegoede@redhat.com
2019-12-17 04:29:05 +08:00
PWM_LOOKUP("crystal_cove_pwm", 0, "0000:00:02.0", "pwm_pmic_backlight", 0, PWM_POLARITY_NORMAL),
};
static int intel_soc_pmic_i2c_probe(struct i2c_client *i2c,
const struct i2c_device_id *i2c_id)
{
struct device *dev = &i2c->dev;
struct intel_soc_pmic_config *config;
struct intel_soc_pmic *pmic;
int ret;
if (soc_intel_is_byt())
config = &intel_soc_pmic_config_byt_crc;
else
config = &intel_soc_pmic_config_cht_crc;
pmic = devm_kzalloc(dev, sizeof(*pmic), GFP_KERNEL);
if (!pmic)
return -ENOMEM;
dev_set_drvdata(dev, pmic);
pmic->regmap = devm_regmap_init_i2c(i2c, config->regmap_config);
if (IS_ERR(pmic->regmap))
return PTR_ERR(pmic->regmap);
pmic->irq = i2c->irq;
ret = regmap_add_irq_chip(pmic->regmap, pmic->irq,
config->irq_flags | IRQF_ONESHOT,
0, config->irq_chip,
&pmic->irq_chip_data);
if (ret)
return ret;
ret = enable_irq_wake(pmic->irq);
if (ret)
dev_warn(dev, "Can't enable IRQ as wake source: %d\n", ret);
/* Add lookup table for crc-pwm */
pwm_add_table(crc_pwm_lookup, ARRAY_SIZE(crc_pwm_lookup));
/* To distuingish this domain from the GPIO/charger's irqchip domains */
irq_domain_update_bus_token(regmap_irq_get_domain(pmic->irq_chip_data),
DOMAIN_BUS_NEXUS);
ret = mfd_add_devices(dev, -1, config->cell_dev,
config->n_cell_devs, NULL, 0,
regmap_irq_get_domain(pmic->irq_chip_data));
if (ret)
goto err_del_irq_chip;
return 0;
err_del_irq_chip:
regmap_del_irq_chip(pmic->irq, pmic->irq_chip_data);
return ret;
}
static int intel_soc_pmic_i2c_remove(struct i2c_client *i2c)
{
struct intel_soc_pmic *pmic = dev_get_drvdata(&i2c->dev);
regmap_del_irq_chip(pmic->irq, pmic->irq_chip_data);
/* remove crc-pwm lookup table */
pwm_remove_table(crc_pwm_lookup, ARRAY_SIZE(crc_pwm_lookup));
mfd_remove_devices(&i2c->dev);
return 0;
}
static void intel_soc_pmic_shutdown(struct i2c_client *i2c)
{
struct intel_soc_pmic *pmic = dev_get_drvdata(&i2c->dev);
disable_irq(pmic->irq);
return;
}
#if defined(CONFIG_PM_SLEEP)
static int intel_soc_pmic_suspend(struct device *dev)
{
struct intel_soc_pmic *pmic = dev_get_drvdata(dev);
disable_irq(pmic->irq);
return 0;
}
static int intel_soc_pmic_resume(struct device *dev)
{
struct intel_soc_pmic *pmic = dev_get_drvdata(dev);
enable_irq(pmic->irq);
return 0;
}
#endif
static SIMPLE_DEV_PM_OPS(intel_soc_pmic_pm_ops, intel_soc_pmic_suspend,
intel_soc_pmic_resume);
static const struct i2c_device_id intel_soc_pmic_i2c_id[] = {
{ }
};
MODULE_DEVICE_TABLE(i2c, intel_soc_pmic_i2c_id);
#if defined(CONFIG_ACPI)
static const struct acpi_device_id intel_soc_pmic_acpi_match[] = {
{ "INT33FD" },
{ },
};
MODULE_DEVICE_TABLE(acpi, intel_soc_pmic_acpi_match);
#endif
static struct i2c_driver intel_soc_pmic_i2c_driver = {
.driver = {
.name = "intel_soc_pmic_i2c",
.pm = &intel_soc_pmic_pm_ops,
.acpi_match_table = ACPI_PTR(intel_soc_pmic_acpi_match),
},
.probe = intel_soc_pmic_i2c_probe,
.remove = intel_soc_pmic_i2c_remove,
.id_table = intel_soc_pmic_i2c_id,
.shutdown = intel_soc_pmic_shutdown,
};
module_i2c_driver(intel_soc_pmic_i2c_driver);
MODULE_DESCRIPTION("I2C driver for Intel SoC PMIC");
MODULE_LICENSE("GPL v2");
MODULE_AUTHOR("Yang, Bin <bin.yang@intel.com>");
MODULE_AUTHOR("Zhu, Lejun <lejun.zhu@linux.intel.com>");