OpenCloudOS-Kernel/drivers/scsi/libiscsi.c

3911 lines
104 KiB
C
Raw Normal View History

// SPDX-License-Identifier: GPL-2.0-or-later
/*
* iSCSI lib functions
*
* Copyright (C) 2006 Red Hat, Inc. All rights reserved.
* Copyright (C) 2004 - 2006 Mike Christie
* Copyright (C) 2004 - 2005 Dmitry Yusupov
* Copyright (C) 2004 - 2005 Alex Aizman
* maintained by open-iscsi@googlegroups.com
*/
#include <linux/types.h>
#include <linux/kfifo.h>
#include <linux/delay.h>
#include <linux/log2.h>
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-24 16:04:11 +08:00
#include <linux/slab.h>
#include <linux/sched/signal.h>
#include <linux/module.h>
#include <asm/unaligned.h>
#include <net/tcp.h>
#include <scsi/scsi_cmnd.h>
#include <scsi/scsi_device.h>
#include <scsi/scsi_eh.h>
#include <scsi/scsi_tcq.h>
#include <scsi/scsi_host.h>
#include <scsi/scsi.h>
#include <scsi/iscsi_proto.h>
#include <scsi/scsi_transport.h>
#include <scsi/scsi_transport_iscsi.h>
#include <scsi/libiscsi.h>
#include <trace/events/iscsi.h>
static int iscsi_dbg_lib_conn;
module_param_named(debug_libiscsi_conn, iscsi_dbg_lib_conn, int,
S_IRUGO | S_IWUSR);
MODULE_PARM_DESC(debug_libiscsi_conn,
"Turn on debugging for connections in libiscsi module. "
"Set to 1 to turn on, and zero to turn off. Default is off.");
static int iscsi_dbg_lib_session;
module_param_named(debug_libiscsi_session, iscsi_dbg_lib_session, int,
S_IRUGO | S_IWUSR);
MODULE_PARM_DESC(debug_libiscsi_session,
"Turn on debugging for sessions in libiscsi module. "
"Set to 1 to turn on, and zero to turn off. Default is off.");
static int iscsi_dbg_lib_eh;
module_param_named(debug_libiscsi_eh, iscsi_dbg_lib_eh, int,
S_IRUGO | S_IWUSR);
MODULE_PARM_DESC(debug_libiscsi_eh,
"Turn on debugging for error handling in libiscsi module. "
"Set to 1 to turn on, and zero to turn off. Default is off.");
#define ISCSI_DBG_CONN(_conn, dbg_fmt, arg...) \
do { \
if (iscsi_dbg_lib_conn) \
iscsi_conn_printk(KERN_INFO, _conn, \
"%s " dbg_fmt, \
__func__, ##arg); \
iscsi_dbg_trace(trace_iscsi_dbg_conn, \
&(_conn)->cls_conn->dev, \
"%s " dbg_fmt, __func__, ##arg);\
} while (0);
#define ISCSI_DBG_SESSION(_session, dbg_fmt, arg...) \
do { \
if (iscsi_dbg_lib_session) \
iscsi_session_printk(KERN_INFO, _session, \
"%s " dbg_fmt, \
__func__, ##arg); \
iscsi_dbg_trace(trace_iscsi_dbg_session, \
&(_session)->cls_session->dev, \
"%s " dbg_fmt, __func__, ##arg); \
} while (0);
#define ISCSI_DBG_EH(_session, dbg_fmt, arg...) \
do { \
if (iscsi_dbg_lib_eh) \
iscsi_session_printk(KERN_INFO, _session, \
"%s " dbg_fmt, \
__func__, ##arg); \
iscsi_dbg_trace(trace_iscsi_dbg_eh, \
&(_session)->cls_session->dev, \
"%s " dbg_fmt, __func__, ##arg); \
} while (0);
scsi: iscsi: Remove iscsi_get_task back_lock requirement We currently require that the back_lock is held when calling the functions that manipulate the iscsi_task refcount. The only reason for this is to handle races where we are handling SCSI-ml EH callbacks and the cmd is completing at the same time the normal completion path is running, and we can't return from the EH callback until the driver has stopped accessing the cmd. Holding the back_lock while also accessing the task->state made it simple to check that a cmd is completing and also get/put a refcount at the same time, and at the time we were not as concerned about performance. The problem is that we don't want to take the back_lock from the xmit path for normal I/O since it causes contention with the completion path if the user has chosen to try and split those paths on different CPUs (in this case abusing the CPUs and ignoring caching improves perf for some uses). Begins to remove the back_lock requirement for iscsi_get/put_task by removing the requirement for the get path. Instead of always holding the back_lock we detect if something has done the last put and is about to call iscsi_free_task(). A subsequent commit will then allow iSCSI code to do the last put on a task and only grab the back_lock if the refcount is now zero and it's going to call iscsi_free_task(). Link: https://lore.kernel.org/r/20220616224557.115234-8-michael.christie@oracle.com Reviewed-by: Lee Duncan <lduncan@suse.com> Signed-off-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-06-17 06:45:55 +08:00
#define ISCSI_CMD_COMPL_WAIT 5
inline void iscsi_conn_queue_xmit(struct iscsi_conn *conn)
{
struct Scsi_Host *shost = conn->session->host;
struct iscsi_host *ihost = shost_priv(shost);
if (ihost->workq)
queue_work(ihost->workq, &conn->xmitwork);
}
EXPORT_SYMBOL_GPL(iscsi_conn_queue_xmit);
inline void iscsi_conn_queue_recv(struct iscsi_conn *conn)
{
struct Scsi_Host *shost = conn->session->host;
struct iscsi_host *ihost = shost_priv(shost);
if (ihost->workq && !test_bit(ISCSI_CONN_FLAG_SUSPEND_RX, &conn->flags))
queue_work(ihost->workq, &conn->recvwork);
}
EXPORT_SYMBOL_GPL(iscsi_conn_queue_recv);
static void __iscsi_update_cmdsn(struct iscsi_session *session,
uint32_t exp_cmdsn, uint32_t max_cmdsn)
{
/*
* standard specifies this check for when to update expected and
* max sequence numbers
*/
if (iscsi_sna_lt(max_cmdsn, exp_cmdsn - 1))
return;
if (exp_cmdsn != session->exp_cmdsn &&
!iscsi_sna_lt(exp_cmdsn, session->exp_cmdsn))
session->exp_cmdsn = exp_cmdsn;
if (max_cmdsn != session->max_cmdsn &&
!iscsi_sna_lt(max_cmdsn, session->max_cmdsn))
session->max_cmdsn = max_cmdsn;
}
void iscsi_update_cmdsn(struct iscsi_session *session, struct iscsi_nopin *hdr)
{
__iscsi_update_cmdsn(session, be32_to_cpu(hdr->exp_cmdsn),
be32_to_cpu(hdr->max_cmdsn));
}
EXPORT_SYMBOL_GPL(iscsi_update_cmdsn);
/**
* iscsi_prep_data_out_pdu - initialize Data-Out
* @task: scsi command task
* @r2t: R2T info
* @hdr: iscsi data in pdu
*
* Notes:
* Initialize Data-Out within this R2T sequence and finds
* proper data_offset within this SCSI command.
*
* This function is called with connection lock taken.
**/
void iscsi_prep_data_out_pdu(struct iscsi_task *task, struct iscsi_r2t_info *r2t,
struct iscsi_data *hdr)
{
struct iscsi_conn *conn = task->conn;
unsigned int left = r2t->data_length - r2t->sent;
task->hdr_len = sizeof(struct iscsi_data);
memset(hdr, 0, sizeof(struct iscsi_data));
hdr->ttt = r2t->ttt;
hdr->datasn = cpu_to_be32(r2t->datasn);
r2t->datasn++;
hdr->opcode = ISCSI_OP_SCSI_DATA_OUT;
hdr->lun = task->lun;
hdr->itt = task->hdr_itt;
hdr->exp_statsn = r2t->exp_statsn;
hdr->offset = cpu_to_be32(r2t->data_offset + r2t->sent);
if (left > conn->max_xmit_dlength) {
hton24(hdr->dlength, conn->max_xmit_dlength);
r2t->data_count = conn->max_xmit_dlength;
hdr->flags = 0;
} else {
hton24(hdr->dlength, left);
r2t->data_count = left;
hdr->flags = ISCSI_FLAG_CMD_FINAL;
}
conn->dataout_pdus_cnt++;
}
EXPORT_SYMBOL_GPL(iscsi_prep_data_out_pdu);
static int iscsi_add_hdr(struct iscsi_task *task, unsigned len)
[SCSI] iscsi_tcp, libiscsi: initial AHS Support at libiscsi generic code - currently code assumes a storage space of pdu header is allocated at llds ctask and is pointed to by iscsi_cmd_task->hdr. Here I add a hdr_max field pertaining to that storage, and an hdr_len that accumulates the current use of the pdu-header. - Add an iscsi_next_hdr() inline which returns the next free space to write new Header at. Also iscsi_next_hdr() is used to retrieve the address at which to write the header-digest. - Add iscsi_add_hdr(length). What the user do is calls iscsi_next_hdr() for address of the new header, than calls iscsi_add_hdr(length) with the size of the new header. iscsi_add_hdr() will check if space is available and update to the new size. length must be padded according to standard. - Add 2 padding inline helpers thanks to Olaf. Current patch does not use them but Following patches will. Also moved definition of ISCSI_PAD_LEN to iscsi_proto.h which had PAD_WORD_LEN that was never used anywhere. - Let iscsi_prep_scsi_cmd_pdu() signal an Error return since now it is possible that it will fail. - I was tired of yet again writing a "this is a digest" comment next to sizeof(__u32) so I defined a new ISCSI_DIGEST_SIZE. Now I don't need any comments. Changed all places that used sizeof(__u32) or "4" in connection to a digest. iscsi_tcp specific code - At struct iscsi_tcp_cmd_task allocate maximum space allowed in standard for all headers following the iscsi_cmd header. and mark it so in iscsi_tcp_session_create() - At iscsi_send_cmd_hdr() retrieve the correct headers size and write header digest at iscsi_next_hdr(). Signed-off-by: Boaz Harrosh <bharrosh@panasas.com> Signed-off-by: Olaf Kirch <olaf.kirch@oracle.com> Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2007-12-14 02:43:23 +08:00
{
unsigned exp_len = task->hdr_len + len;
[SCSI] iscsi_tcp, libiscsi: initial AHS Support at libiscsi generic code - currently code assumes a storage space of pdu header is allocated at llds ctask and is pointed to by iscsi_cmd_task->hdr. Here I add a hdr_max field pertaining to that storage, and an hdr_len that accumulates the current use of the pdu-header. - Add an iscsi_next_hdr() inline which returns the next free space to write new Header at. Also iscsi_next_hdr() is used to retrieve the address at which to write the header-digest. - Add iscsi_add_hdr(length). What the user do is calls iscsi_next_hdr() for address of the new header, than calls iscsi_add_hdr(length) with the size of the new header. iscsi_add_hdr() will check if space is available and update to the new size. length must be padded according to standard. - Add 2 padding inline helpers thanks to Olaf. Current patch does not use them but Following patches will. Also moved definition of ISCSI_PAD_LEN to iscsi_proto.h which had PAD_WORD_LEN that was never used anywhere. - Let iscsi_prep_scsi_cmd_pdu() signal an Error return since now it is possible that it will fail. - I was tired of yet again writing a "this is a digest" comment next to sizeof(__u32) so I defined a new ISCSI_DIGEST_SIZE. Now I don't need any comments. Changed all places that used sizeof(__u32) or "4" in connection to a digest. iscsi_tcp specific code - At struct iscsi_tcp_cmd_task allocate maximum space allowed in standard for all headers following the iscsi_cmd header. and mark it so in iscsi_tcp_session_create() - At iscsi_send_cmd_hdr() retrieve the correct headers size and write header digest at iscsi_next_hdr(). Signed-off-by: Boaz Harrosh <bharrosh@panasas.com> Signed-off-by: Olaf Kirch <olaf.kirch@oracle.com> Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2007-12-14 02:43:23 +08:00
if (exp_len > task->hdr_max) {
[SCSI] iscsi_tcp, libiscsi: initial AHS Support at libiscsi generic code - currently code assumes a storage space of pdu header is allocated at llds ctask and is pointed to by iscsi_cmd_task->hdr. Here I add a hdr_max field pertaining to that storage, and an hdr_len that accumulates the current use of the pdu-header. - Add an iscsi_next_hdr() inline which returns the next free space to write new Header at. Also iscsi_next_hdr() is used to retrieve the address at which to write the header-digest. - Add iscsi_add_hdr(length). What the user do is calls iscsi_next_hdr() for address of the new header, than calls iscsi_add_hdr(length) with the size of the new header. iscsi_add_hdr() will check if space is available and update to the new size. length must be padded according to standard. - Add 2 padding inline helpers thanks to Olaf. Current patch does not use them but Following patches will. Also moved definition of ISCSI_PAD_LEN to iscsi_proto.h which had PAD_WORD_LEN that was never used anywhere. - Let iscsi_prep_scsi_cmd_pdu() signal an Error return since now it is possible that it will fail. - I was tired of yet again writing a "this is a digest" comment next to sizeof(__u32) so I defined a new ISCSI_DIGEST_SIZE. Now I don't need any comments. Changed all places that used sizeof(__u32) or "4" in connection to a digest. iscsi_tcp specific code - At struct iscsi_tcp_cmd_task allocate maximum space allowed in standard for all headers following the iscsi_cmd header. and mark it so in iscsi_tcp_session_create() - At iscsi_send_cmd_hdr() retrieve the correct headers size and write header digest at iscsi_next_hdr(). Signed-off-by: Boaz Harrosh <bharrosh@panasas.com> Signed-off-by: Olaf Kirch <olaf.kirch@oracle.com> Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2007-12-14 02:43:23 +08:00
WARN_ON(1);
return -EINVAL;
}
WARN_ON(len & (ISCSI_PAD_LEN - 1)); /* caller must pad the AHS */
task->hdr_len = exp_len;
[SCSI] iscsi_tcp, libiscsi: initial AHS Support at libiscsi generic code - currently code assumes a storage space of pdu header is allocated at llds ctask and is pointed to by iscsi_cmd_task->hdr. Here I add a hdr_max field pertaining to that storage, and an hdr_len that accumulates the current use of the pdu-header. - Add an iscsi_next_hdr() inline which returns the next free space to write new Header at. Also iscsi_next_hdr() is used to retrieve the address at which to write the header-digest. - Add iscsi_add_hdr(length). What the user do is calls iscsi_next_hdr() for address of the new header, than calls iscsi_add_hdr(length) with the size of the new header. iscsi_add_hdr() will check if space is available and update to the new size. length must be padded according to standard. - Add 2 padding inline helpers thanks to Olaf. Current patch does not use them but Following patches will. Also moved definition of ISCSI_PAD_LEN to iscsi_proto.h which had PAD_WORD_LEN that was never used anywhere. - Let iscsi_prep_scsi_cmd_pdu() signal an Error return since now it is possible that it will fail. - I was tired of yet again writing a "this is a digest" comment next to sizeof(__u32) so I defined a new ISCSI_DIGEST_SIZE. Now I don't need any comments. Changed all places that used sizeof(__u32) or "4" in connection to a digest. iscsi_tcp specific code - At struct iscsi_tcp_cmd_task allocate maximum space allowed in standard for all headers following the iscsi_cmd header. and mark it so in iscsi_tcp_session_create() - At iscsi_send_cmd_hdr() retrieve the correct headers size and write header digest at iscsi_next_hdr(). Signed-off-by: Boaz Harrosh <bharrosh@panasas.com> Signed-off-by: Olaf Kirch <olaf.kirch@oracle.com> Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2007-12-14 02:43:23 +08:00
return 0;
}
/*
* make an extended cdb AHS
*/
static int iscsi_prep_ecdb_ahs(struct iscsi_task *task)
{
struct scsi_cmnd *cmd = task->sc;
unsigned rlen, pad_len;
unsigned short ahslength;
struct iscsi_ecdb_ahdr *ecdb_ahdr;
int rc;
ecdb_ahdr = iscsi_next_hdr(task);
rlen = cmd->cmd_len - ISCSI_CDB_SIZE;
BUG_ON(rlen > sizeof(ecdb_ahdr->ecdb));
ahslength = rlen + sizeof(ecdb_ahdr->reserved);
pad_len = iscsi_padding(rlen);
rc = iscsi_add_hdr(task, sizeof(ecdb_ahdr->ahslength) +
sizeof(ecdb_ahdr->ahstype) + ahslength + pad_len);
if (rc)
return rc;
if (pad_len)
memset(&ecdb_ahdr->ecdb[rlen], 0, pad_len);
ecdb_ahdr->ahslength = cpu_to_be16(ahslength);
ecdb_ahdr->ahstype = ISCSI_AHSTYPE_CDB;
ecdb_ahdr->reserved = 0;
memcpy(ecdb_ahdr->ecdb, cmd->cmnd + ISCSI_CDB_SIZE, rlen);
ISCSI_DBG_SESSION(task->conn->session,
"iscsi_prep_ecdb_ahs: varlen_cdb_len %d "
"rlen %d pad_len %d ahs_length %d iscsi_headers_size "
"%u\n", cmd->cmd_len, rlen, pad_len, ahslength,
task->hdr_len);
return 0;
}
/**
* iscsi_check_tmf_restrictions - check if a task is affected by TMF
* @task: iscsi task
* @opcode: opcode to check for
*
* During TMF a task has to be checked if it's affected.
* All unrelated I/O can be passed through, but I/O to the
* affected LUN should be restricted.
* If 'fast_abort' is set we won't be sending any I/O to the
* affected LUN.
* Otherwise the target is waiting for all TTTs to be completed,
* so we have to send all outstanding Data-Out PDUs to the target.
*/
static int iscsi_check_tmf_restrictions(struct iscsi_task *task, int opcode)
{
struct iscsi_session *session = task->conn->session;
struct iscsi_tm *tmf = &session->tmhdr;
u64 hdr_lun;
if (session->tmf_state == TMF_INITIAL)
return 0;
if ((tmf->opcode & ISCSI_OPCODE_MASK) != ISCSI_OP_SCSI_TMFUNC)
return 0;
switch (ISCSI_TM_FUNC_VALUE(tmf)) {
case ISCSI_TM_FUNC_LOGICAL_UNIT_RESET:
/*
* Allow PDUs for unrelated LUNs
*/
hdr_lun = scsilun_to_int(&tmf->lun);
if (hdr_lun != task->sc->device->lun)
return 0;
fallthrough;
case ISCSI_TM_FUNC_TARGET_WARM_RESET:
/*
* Fail all SCSI cmd PDUs
*/
if (opcode != ISCSI_OP_SCSI_DATA_OUT) {
iscsi_session_printk(KERN_INFO, session,
"task [op %x itt 0x%x/0x%x] rejected.\n",
opcode, task->itt, task->hdr_itt);
return -EACCES;
}
/*
* And also all data-out PDUs in response to R2T
* if fast_abort is set.
*/
if (session->fast_abort) {
iscsi_session_printk(KERN_INFO, session,
"task [op %x itt 0x%x/0x%x] fast abort.\n",
opcode, task->itt, task->hdr_itt);
return -EACCES;
}
break;
case ISCSI_TM_FUNC_ABORT_TASK:
/*
* the caller has already checked if the task
* they want to abort was in the pending queue so if
* we are here the cmd pdu has gone out already, and
* we will only hit this for data-outs
*/
if (opcode == ISCSI_OP_SCSI_DATA_OUT &&
task->hdr_itt == tmf->rtt) {
ISCSI_DBG_SESSION(session,
"Preventing task %x/%x from sending "
"data-out due to abort task in "
"progress\n", task->itt,
task->hdr_itt);
return -EACCES;
}
break;
}
return 0;
}
/**
* iscsi_prep_scsi_cmd_pdu - prep iscsi scsi cmd pdu
* @task: iscsi task
*
* Prep basic iSCSI PDU fields for a scsi cmd pdu. The LLD should set
* fields like dlength or final based on how much data it sends
*/
static int iscsi_prep_scsi_cmd_pdu(struct iscsi_task *task)
{
struct iscsi_conn *conn = task->conn;
struct iscsi_session *session = conn->session;
struct scsi_cmnd *sc = task->sc;
struct iscsi_scsi_req *hdr;
unsigned hdrlength, cmd_len, transfer_length;
itt_t itt;
[SCSI] iscsi_tcp, libiscsi: initial AHS Support at libiscsi generic code - currently code assumes a storage space of pdu header is allocated at llds ctask and is pointed to by iscsi_cmd_task->hdr. Here I add a hdr_max field pertaining to that storage, and an hdr_len that accumulates the current use of the pdu-header. - Add an iscsi_next_hdr() inline which returns the next free space to write new Header at. Also iscsi_next_hdr() is used to retrieve the address at which to write the header-digest. - Add iscsi_add_hdr(length). What the user do is calls iscsi_next_hdr() for address of the new header, than calls iscsi_add_hdr(length) with the size of the new header. iscsi_add_hdr() will check if space is available and update to the new size. length must be padded according to standard. - Add 2 padding inline helpers thanks to Olaf. Current patch does not use them but Following patches will. Also moved definition of ISCSI_PAD_LEN to iscsi_proto.h which had PAD_WORD_LEN that was never used anywhere. - Let iscsi_prep_scsi_cmd_pdu() signal an Error return since now it is possible that it will fail. - I was tired of yet again writing a "this is a digest" comment next to sizeof(__u32) so I defined a new ISCSI_DIGEST_SIZE. Now I don't need any comments. Changed all places that used sizeof(__u32) or "4" in connection to a digest. iscsi_tcp specific code - At struct iscsi_tcp_cmd_task allocate maximum space allowed in standard for all headers following the iscsi_cmd header. and mark it so in iscsi_tcp_session_create() - At iscsi_send_cmd_hdr() retrieve the correct headers size and write header digest at iscsi_next_hdr(). Signed-off-by: Boaz Harrosh <bharrosh@panasas.com> Signed-off-by: Olaf Kirch <olaf.kirch@oracle.com> Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2007-12-14 02:43:23 +08:00
int rc;
rc = iscsi_check_tmf_restrictions(task, ISCSI_OP_SCSI_CMD);
if (rc)
return rc;
if (conn->session->tt->alloc_pdu) {
rc = conn->session->tt->alloc_pdu(task, ISCSI_OP_SCSI_CMD);
if (rc)
return rc;
}
hdr = (struct iscsi_scsi_req *)task->hdr;
itt = hdr->itt;
memset(hdr, 0, sizeof(*hdr));
if (session->tt->parse_pdu_itt)
hdr->itt = task->hdr_itt = itt;
else
hdr->itt = task->hdr_itt = build_itt(task->itt,
task->conn->session->age);
task->hdr_len = 0;
rc = iscsi_add_hdr(task, sizeof(*hdr));
[SCSI] iscsi_tcp, libiscsi: initial AHS Support at libiscsi generic code - currently code assumes a storage space of pdu header is allocated at llds ctask and is pointed to by iscsi_cmd_task->hdr. Here I add a hdr_max field pertaining to that storage, and an hdr_len that accumulates the current use of the pdu-header. - Add an iscsi_next_hdr() inline which returns the next free space to write new Header at. Also iscsi_next_hdr() is used to retrieve the address at which to write the header-digest. - Add iscsi_add_hdr(length). What the user do is calls iscsi_next_hdr() for address of the new header, than calls iscsi_add_hdr(length) with the size of the new header. iscsi_add_hdr() will check if space is available and update to the new size. length must be padded according to standard. - Add 2 padding inline helpers thanks to Olaf. Current patch does not use them but Following patches will. Also moved definition of ISCSI_PAD_LEN to iscsi_proto.h which had PAD_WORD_LEN that was never used anywhere. - Let iscsi_prep_scsi_cmd_pdu() signal an Error return since now it is possible that it will fail. - I was tired of yet again writing a "this is a digest" comment next to sizeof(__u32) so I defined a new ISCSI_DIGEST_SIZE. Now I don't need any comments. Changed all places that used sizeof(__u32) or "4" in connection to a digest. iscsi_tcp specific code - At struct iscsi_tcp_cmd_task allocate maximum space allowed in standard for all headers following the iscsi_cmd header. and mark it so in iscsi_tcp_session_create() - At iscsi_send_cmd_hdr() retrieve the correct headers size and write header digest at iscsi_next_hdr(). Signed-off-by: Boaz Harrosh <bharrosh@panasas.com> Signed-off-by: Olaf Kirch <olaf.kirch@oracle.com> Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2007-12-14 02:43:23 +08:00
if (rc)
return rc;
hdr->opcode = ISCSI_OP_SCSI_CMD;
hdr->flags = ISCSI_ATTR_SIMPLE;
int_to_scsilun(sc->device->lun, &hdr->lun);
task->lun = hdr->lun;
hdr->exp_statsn = cpu_to_be32(conn->exp_statsn);
cmd_len = sc->cmd_len;
if (cmd_len < ISCSI_CDB_SIZE)
memset(&hdr->cdb[cmd_len], 0, ISCSI_CDB_SIZE - cmd_len);
else if (cmd_len > ISCSI_CDB_SIZE) {
rc = iscsi_prep_ecdb_ahs(task);
if (rc)
return rc;
cmd_len = ISCSI_CDB_SIZE;
}
memcpy(hdr->cdb, sc->cmnd, cmd_len);
task->imm_count = 0;
if (scsi_get_prot_op(sc) != SCSI_PROT_NORMAL)
task->protected = true;
transfer_length = scsi_transfer_length(sc);
hdr->data_length = cpu_to_be32(transfer_length);
if (sc->sc_data_direction == DMA_TO_DEVICE) {
struct iscsi_r2t_info *r2t = &task->unsol_r2t;
hdr->flags |= ISCSI_FLAG_CMD_WRITE;
/*
* Write counters:
*
* imm_count bytes to be sent right after
* SCSI PDU Header
*
* unsol_count bytes(as Data-Out) to be sent
* without R2T ack right after
* immediate data
*
* r2t data_length bytes to be sent via R2T ack's
*
* pad_count bytes to be sent as zero-padding
*/
memset(r2t, 0, sizeof(*r2t));
if (session->imm_data_en) {
if (transfer_length >= session->first_burst)
task->imm_count = min(session->first_burst,
conn->max_xmit_dlength);
else
task->imm_count = min(transfer_length,
conn->max_xmit_dlength);
hton24(hdr->dlength, task->imm_count);
} else
zero_data(hdr->dlength);
if (!session->initial_r2t_en) {
r2t->data_length = min(session->first_burst,
transfer_length) -
task->imm_count;
r2t->data_offset = task->imm_count;
r2t->ttt = cpu_to_be32(ISCSI_RESERVED_TAG);
r2t->exp_statsn = cpu_to_be32(conn->exp_statsn);
}
if (!task->unsol_r2t.data_length)
/* No unsolicit Data-Out's */
hdr->flags |= ISCSI_FLAG_CMD_FINAL;
} else {
hdr->flags |= ISCSI_FLAG_CMD_FINAL;
zero_data(hdr->dlength);
if (sc->sc_data_direction == DMA_FROM_DEVICE)
hdr->flags |= ISCSI_FLAG_CMD_READ;
}
[SCSI] iscsi_tcp, libiscsi: initial AHS Support at libiscsi generic code - currently code assumes a storage space of pdu header is allocated at llds ctask and is pointed to by iscsi_cmd_task->hdr. Here I add a hdr_max field pertaining to that storage, and an hdr_len that accumulates the current use of the pdu-header. - Add an iscsi_next_hdr() inline which returns the next free space to write new Header at. Also iscsi_next_hdr() is used to retrieve the address at which to write the header-digest. - Add iscsi_add_hdr(length). What the user do is calls iscsi_next_hdr() for address of the new header, than calls iscsi_add_hdr(length) with the size of the new header. iscsi_add_hdr() will check if space is available and update to the new size. length must be padded according to standard. - Add 2 padding inline helpers thanks to Olaf. Current patch does not use them but Following patches will. Also moved definition of ISCSI_PAD_LEN to iscsi_proto.h which had PAD_WORD_LEN that was never used anywhere. - Let iscsi_prep_scsi_cmd_pdu() signal an Error return since now it is possible that it will fail. - I was tired of yet again writing a "this is a digest" comment next to sizeof(__u32) so I defined a new ISCSI_DIGEST_SIZE. Now I don't need any comments. Changed all places that used sizeof(__u32) or "4" in connection to a digest. iscsi_tcp specific code - At struct iscsi_tcp_cmd_task allocate maximum space allowed in standard for all headers following the iscsi_cmd header. and mark it so in iscsi_tcp_session_create() - At iscsi_send_cmd_hdr() retrieve the correct headers size and write header digest at iscsi_next_hdr(). Signed-off-by: Boaz Harrosh <bharrosh@panasas.com> Signed-off-by: Olaf Kirch <olaf.kirch@oracle.com> Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2007-12-14 02:43:23 +08:00
/* calculate size of additional header segments (AHSs) */
hdrlength = task->hdr_len - sizeof(*hdr);
[SCSI] iscsi_tcp, libiscsi: initial AHS Support at libiscsi generic code - currently code assumes a storage space of pdu header is allocated at llds ctask and is pointed to by iscsi_cmd_task->hdr. Here I add a hdr_max field pertaining to that storage, and an hdr_len that accumulates the current use of the pdu-header. - Add an iscsi_next_hdr() inline which returns the next free space to write new Header at. Also iscsi_next_hdr() is used to retrieve the address at which to write the header-digest. - Add iscsi_add_hdr(length). What the user do is calls iscsi_next_hdr() for address of the new header, than calls iscsi_add_hdr(length) with the size of the new header. iscsi_add_hdr() will check if space is available and update to the new size. length must be padded according to standard. - Add 2 padding inline helpers thanks to Olaf. Current patch does not use them but Following patches will. Also moved definition of ISCSI_PAD_LEN to iscsi_proto.h which had PAD_WORD_LEN that was never used anywhere. - Let iscsi_prep_scsi_cmd_pdu() signal an Error return since now it is possible that it will fail. - I was tired of yet again writing a "this is a digest" comment next to sizeof(__u32) so I defined a new ISCSI_DIGEST_SIZE. Now I don't need any comments. Changed all places that used sizeof(__u32) or "4" in connection to a digest. iscsi_tcp specific code - At struct iscsi_tcp_cmd_task allocate maximum space allowed in standard for all headers following the iscsi_cmd header. and mark it so in iscsi_tcp_session_create() - At iscsi_send_cmd_hdr() retrieve the correct headers size and write header digest at iscsi_next_hdr(). Signed-off-by: Boaz Harrosh <bharrosh@panasas.com> Signed-off-by: Olaf Kirch <olaf.kirch@oracle.com> Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2007-12-14 02:43:23 +08:00
WARN_ON(hdrlength & (ISCSI_PAD_LEN-1));
hdrlength /= ISCSI_PAD_LEN;
WARN_ON(hdrlength >= 256);
hdr->hlength = hdrlength & 0xFF;
hdr->cmdsn = task->cmdsn = cpu_to_be32(session->cmdsn);
[SCSI] iscsi_tcp, libiscsi: initial AHS Support at libiscsi generic code - currently code assumes a storage space of pdu header is allocated at llds ctask and is pointed to by iscsi_cmd_task->hdr. Here I add a hdr_max field pertaining to that storage, and an hdr_len that accumulates the current use of the pdu-header. - Add an iscsi_next_hdr() inline which returns the next free space to write new Header at. Also iscsi_next_hdr() is used to retrieve the address at which to write the header-digest. - Add iscsi_add_hdr(length). What the user do is calls iscsi_next_hdr() for address of the new header, than calls iscsi_add_hdr(length) with the size of the new header. iscsi_add_hdr() will check if space is available and update to the new size. length must be padded according to standard. - Add 2 padding inline helpers thanks to Olaf. Current patch does not use them but Following patches will. Also moved definition of ISCSI_PAD_LEN to iscsi_proto.h which had PAD_WORD_LEN that was never used anywhere. - Let iscsi_prep_scsi_cmd_pdu() signal an Error return since now it is possible that it will fail. - I was tired of yet again writing a "this is a digest" comment next to sizeof(__u32) so I defined a new ISCSI_DIGEST_SIZE. Now I don't need any comments. Changed all places that used sizeof(__u32) or "4" in connection to a digest. iscsi_tcp specific code - At struct iscsi_tcp_cmd_task allocate maximum space allowed in standard for all headers following the iscsi_cmd header. and mark it so in iscsi_tcp_session_create() - At iscsi_send_cmd_hdr() retrieve the correct headers size and write header digest at iscsi_next_hdr(). Signed-off-by: Boaz Harrosh <bharrosh@panasas.com> Signed-off-by: Olaf Kirch <olaf.kirch@oracle.com> Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2007-12-14 02:43:23 +08:00
if (session->tt->init_task && session->tt->init_task(task))
return -EIO;
task->state = ISCSI_TASK_RUNNING;
session->cmdsn++;
conn->scsicmd_pdus_cnt++;
ISCSI_DBG_SESSION(session, "iscsi prep [%s cid %d sc %p cdb 0x%x "
"itt 0x%x len %d cmdsn %d win %d]\n",
sc->sc_data_direction == DMA_TO_DEVICE ?
"write" : "read", conn->id, sc, sc->cmnd[0],
task->itt, transfer_length,
session->cmdsn,
session->max_cmdsn - session->exp_cmdsn + 1);
[SCSI] iscsi_tcp, libiscsi: initial AHS Support at libiscsi generic code - currently code assumes a storage space of pdu header is allocated at llds ctask and is pointed to by iscsi_cmd_task->hdr. Here I add a hdr_max field pertaining to that storage, and an hdr_len that accumulates the current use of the pdu-header. - Add an iscsi_next_hdr() inline which returns the next free space to write new Header at. Also iscsi_next_hdr() is used to retrieve the address at which to write the header-digest. - Add iscsi_add_hdr(length). What the user do is calls iscsi_next_hdr() for address of the new header, than calls iscsi_add_hdr(length) with the size of the new header. iscsi_add_hdr() will check if space is available and update to the new size. length must be padded according to standard. - Add 2 padding inline helpers thanks to Olaf. Current patch does not use them but Following patches will. Also moved definition of ISCSI_PAD_LEN to iscsi_proto.h which had PAD_WORD_LEN that was never used anywhere. - Let iscsi_prep_scsi_cmd_pdu() signal an Error return since now it is possible that it will fail. - I was tired of yet again writing a "this is a digest" comment next to sizeof(__u32) so I defined a new ISCSI_DIGEST_SIZE. Now I don't need any comments. Changed all places that used sizeof(__u32) or "4" in connection to a digest. iscsi_tcp specific code - At struct iscsi_tcp_cmd_task allocate maximum space allowed in standard for all headers following the iscsi_cmd header. and mark it so in iscsi_tcp_session_create() - At iscsi_send_cmd_hdr() retrieve the correct headers size and write header digest at iscsi_next_hdr(). Signed-off-by: Boaz Harrosh <bharrosh@panasas.com> Signed-off-by: Olaf Kirch <olaf.kirch@oracle.com> Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2007-12-14 02:43:23 +08:00
return 0;
}
/**
* iscsi_free_task - free a task
* @task: iscsi cmd task
*
[SCSI] libiscsi: Reduce locking contention in fast path Replace the session lock with two locks, a forward lock and a backwards lock named frwd_lock and back_lock respectively. The forward lock protects resources that change while sending a request to the target, such as cmdsn, queued_cmdsn, and allocating task from the commands' pool with kfifo_out. The backward lock protects resources that change while processing a response or in error path, such as cmdsn_exp, cmdsn_max, and returning tasks to the commands' pool with kfifo_in. Under a steady state fast-path situation, that is when one or more processes/threads submit IO to an iscsi device and a single kernel upcall (e.g softirq) is dealing with processing of responses without errors, this patch eliminates the contention between the queuecommand()/request response/scsi_done() flows associated with iscsi sessions. Between the forward and the backward locks exists a strict locking hierarchy. The mutual exclusion zone protected by the forward lock can enclose the mutual exclusion zone protected by the backward lock but not vice versa. For example, in iscsi_conn_teardown or in iscsi_xmit_data when there is a failure and __iscsi_put_task is called, the backward lock is taken while the forward lock is still taken. On the other hand, if in the RX path a nop is to be sent, for example in iscsi_handle_reject or __iscsi_complete_pdu than the forward lock is released and the backward lock is taken for the duration of iscsi_send_nopout, later the backward lock is released and the forward lock is retaken. libiscsi_tcp uses two kernel fifos the r2t pool and the r2t queue. The insertion and deletion from these queues didn't corespond to the assumption taken by the new forward/backwards session locking paradigm. That is, in iscsi_tcp_clenup_task which belongs to the RX (backwards) path, r2t is taken out from r2t queue and inserted to the r2t pool. In iscsi_tcp_get_curr_r2t which belong to the TX (forward) path, r2t is also inserted to the r2t pool and another r2t is pulled from r2t queue. Only in iscsi_tcp_r2t_rsp which is called in the RX path but can requeue to the TX path, r2t is taken from the r2t pool and inserted to the r2t queue. In order to cope with this situation, two spin locks were added, pool2queue and queue2pool. The former protects extracting from the r2t pool and inserting to the r2t queue, and the later protects the extracing from the r2t queue and inserting to the r2t pool. Signed-off-by: Shlomo Pongratz <shlomop@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> [minor fix up to apply cleanly and compile fix] Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2014-02-07 14:41:38 +08:00
* Must be called with session back_lock.
* This function returns the scsi command to scsi-ml or cleans
* up mgmt tasks then returns the task to the pool.
*/
static void iscsi_free_task(struct iscsi_task *task)
{
struct iscsi_conn *conn = task->conn;
struct iscsi_session *session = conn->session;
struct scsi_cmnd *sc = task->sc;
int oldstate = task->state;
ISCSI_DBG_SESSION(session, "freeing task itt 0x%x state %d sc %p\n",
task->itt, task->state, task->sc);
session->tt->cleanup_task(task);
task->state = ISCSI_TASK_FREE;
task->sc = NULL;
/*
* login task is preallocated so do not free
*/
if (conn->login_task == task)
return;
kfifo_in(&session->cmdpool.queue, (void*)&task, sizeof(void*));
if (sc) {
/* SCSI eh reuses commands to verify us */
iscsi_cmd(sc)->task = NULL;
/*
* queue command may call this to free the task, so
* it will decide how to return sc to scsi-ml.
*/
if (oldstate != ISCSI_TASK_REQUEUE_SCSIQ)
scsi_done(sc);
}
}
scsi: iscsi: Remove iscsi_get_task back_lock requirement We currently require that the back_lock is held when calling the functions that manipulate the iscsi_task refcount. The only reason for this is to handle races where we are handling SCSI-ml EH callbacks and the cmd is completing at the same time the normal completion path is running, and we can't return from the EH callback until the driver has stopped accessing the cmd. Holding the back_lock while also accessing the task->state made it simple to check that a cmd is completing and also get/put a refcount at the same time, and at the time we were not as concerned about performance. The problem is that we don't want to take the back_lock from the xmit path for normal I/O since it causes contention with the completion path if the user has chosen to try and split those paths on different CPUs (in this case abusing the CPUs and ignoring caching improves perf for some uses). Begins to remove the back_lock requirement for iscsi_get/put_task by removing the requirement for the get path. Instead of always holding the back_lock we detect if something has done the last put and is about to call iscsi_free_task(). A subsequent commit will then allow iSCSI code to do the last put on a task and only grab the back_lock if the refcount is now zero and it's going to call iscsi_free_task(). Link: https://lore.kernel.org/r/20220616224557.115234-8-michael.christie@oracle.com Reviewed-by: Lee Duncan <lduncan@suse.com> Signed-off-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-06-17 06:45:55 +08:00
bool iscsi_get_task(struct iscsi_task *task)
{
scsi: iscsi: Remove iscsi_get_task back_lock requirement We currently require that the back_lock is held when calling the functions that manipulate the iscsi_task refcount. The only reason for this is to handle races where we are handling SCSI-ml EH callbacks and the cmd is completing at the same time the normal completion path is running, and we can't return from the EH callback until the driver has stopped accessing the cmd. Holding the back_lock while also accessing the task->state made it simple to check that a cmd is completing and also get/put a refcount at the same time, and at the time we were not as concerned about performance. The problem is that we don't want to take the back_lock from the xmit path for normal I/O since it causes contention with the completion path if the user has chosen to try and split those paths on different CPUs (in this case abusing the CPUs and ignoring caching improves perf for some uses). Begins to remove the back_lock requirement for iscsi_get/put_task by removing the requirement for the get path. Instead of always holding the back_lock we detect if something has done the last put and is about to call iscsi_free_task(). A subsequent commit will then allow iSCSI code to do the last put on a task and only grab the back_lock if the refcount is now zero and it's going to call iscsi_free_task(). Link: https://lore.kernel.org/r/20220616224557.115234-8-michael.christie@oracle.com Reviewed-by: Lee Duncan <lduncan@suse.com> Signed-off-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-06-17 06:45:55 +08:00
return refcount_inc_not_zero(&task->refcount);
}
scsi: iscsi: Remove iscsi_get_task back_lock requirement We currently require that the back_lock is held when calling the functions that manipulate the iscsi_task refcount. The only reason for this is to handle races where we are handling SCSI-ml EH callbacks and the cmd is completing at the same time the normal completion path is running, and we can't return from the EH callback until the driver has stopped accessing the cmd. Holding the back_lock while also accessing the task->state made it simple to check that a cmd is completing and also get/put a refcount at the same time, and at the time we were not as concerned about performance. The problem is that we don't want to take the back_lock from the xmit path for normal I/O since it causes contention with the completion path if the user has chosen to try and split those paths on different CPUs (in this case abusing the CPUs and ignoring caching improves perf for some uses). Begins to remove the back_lock requirement for iscsi_get/put_task by removing the requirement for the get path. Instead of always holding the back_lock we detect if something has done the last put and is about to call iscsi_free_task(). A subsequent commit will then allow iSCSI code to do the last put on a task and only grab the back_lock if the refcount is now zero and it's going to call iscsi_free_task(). Link: https://lore.kernel.org/r/20220616224557.115234-8-michael.christie@oracle.com Reviewed-by: Lee Duncan <lduncan@suse.com> Signed-off-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-06-17 06:45:55 +08:00
EXPORT_SYMBOL_GPL(iscsi_get_task);
/**
* __iscsi_put_task - drop the refcount on a task
* @task: iscsi_task to drop the refcount on
*
* The back_lock must be held when calling in case it frees the task.
*/
void __iscsi_put_task(struct iscsi_task *task)
{
if (refcount_dec_and_test(&task->refcount))
iscsi_free_task(task);
}
EXPORT_SYMBOL_GPL(__iscsi_put_task);
void iscsi_put_task(struct iscsi_task *task)
{
struct iscsi_session *session = task->conn->session;
if (refcount_dec_and_test(&task->refcount)) {
spin_lock_bh(&session->back_lock);
iscsi_free_task(task);
spin_unlock_bh(&session->back_lock);
}
}
EXPORT_SYMBOL_GPL(iscsi_put_task);
/**
* iscsi_complete_task - finish a task
* @task: iscsi cmd task
* @state: state to complete task with
*
[SCSI] libiscsi: Reduce locking contention in fast path Replace the session lock with two locks, a forward lock and a backwards lock named frwd_lock and back_lock respectively. The forward lock protects resources that change while sending a request to the target, such as cmdsn, queued_cmdsn, and allocating task from the commands' pool with kfifo_out. The backward lock protects resources that change while processing a response or in error path, such as cmdsn_exp, cmdsn_max, and returning tasks to the commands' pool with kfifo_in. Under a steady state fast-path situation, that is when one or more processes/threads submit IO to an iscsi device and a single kernel upcall (e.g softirq) is dealing with processing of responses without errors, this patch eliminates the contention between the queuecommand()/request response/scsi_done() flows associated with iscsi sessions. Between the forward and the backward locks exists a strict locking hierarchy. The mutual exclusion zone protected by the forward lock can enclose the mutual exclusion zone protected by the backward lock but not vice versa. For example, in iscsi_conn_teardown or in iscsi_xmit_data when there is a failure and __iscsi_put_task is called, the backward lock is taken while the forward lock is still taken. On the other hand, if in the RX path a nop is to be sent, for example in iscsi_handle_reject or __iscsi_complete_pdu than the forward lock is released and the backward lock is taken for the duration of iscsi_send_nopout, later the backward lock is released and the forward lock is retaken. libiscsi_tcp uses two kernel fifos the r2t pool and the r2t queue. The insertion and deletion from these queues didn't corespond to the assumption taken by the new forward/backwards session locking paradigm. That is, in iscsi_tcp_clenup_task which belongs to the RX (backwards) path, r2t is taken out from r2t queue and inserted to the r2t pool. In iscsi_tcp_get_curr_r2t which belong to the TX (forward) path, r2t is also inserted to the r2t pool and another r2t is pulled from r2t queue. Only in iscsi_tcp_r2t_rsp which is called in the RX path but can requeue to the TX path, r2t is taken from the r2t pool and inserted to the r2t queue. In order to cope with this situation, two spin locks were added, pool2queue and queue2pool. The former protects extracting from the r2t pool and inserting to the r2t queue, and the later protects the extracing from the r2t queue and inserting to the r2t pool. Signed-off-by: Shlomo Pongratz <shlomop@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> [minor fix up to apply cleanly and compile fix] Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2014-02-07 14:41:38 +08:00
* Must be called with session back_lock.
*/
static void iscsi_complete_task(struct iscsi_task *task, int state)
{
struct iscsi_conn *conn = task->conn;
ISCSI_DBG_SESSION(conn->session,
"complete task itt 0x%x state %d sc %p\n",
task->itt, task->state, task->sc);
if (task->state == ISCSI_TASK_COMPLETED ||
task->state == ISCSI_TASK_ABRT_TMF ||
task->state == ISCSI_TASK_ABRT_SESS_RECOV ||
task->state == ISCSI_TASK_REQUEUE_SCSIQ)
return;
WARN_ON_ONCE(task->state == ISCSI_TASK_FREE);
task->state = state;
if (READ_ONCE(conn->ping_task) == task)
WRITE_ONCE(conn->ping_task, NULL);
/* release get from queueing */
__iscsi_put_task(task);
}
/**
* iscsi_complete_scsi_task - finish scsi task normally
* @task: iscsi task for scsi cmd
* @exp_cmdsn: expected cmd sn in cpu format
* @max_cmdsn: max cmd sn in cpu format
*
* This is used when drivers do not need or cannot perform
* lower level pdu processing.
*
[SCSI] libiscsi: Reduce locking contention in fast path Replace the session lock with two locks, a forward lock and a backwards lock named frwd_lock and back_lock respectively. The forward lock protects resources that change while sending a request to the target, such as cmdsn, queued_cmdsn, and allocating task from the commands' pool with kfifo_out. The backward lock protects resources that change while processing a response or in error path, such as cmdsn_exp, cmdsn_max, and returning tasks to the commands' pool with kfifo_in. Under a steady state fast-path situation, that is when one or more processes/threads submit IO to an iscsi device and a single kernel upcall (e.g softirq) is dealing with processing of responses without errors, this patch eliminates the contention between the queuecommand()/request response/scsi_done() flows associated with iscsi sessions. Between the forward and the backward locks exists a strict locking hierarchy. The mutual exclusion zone protected by the forward lock can enclose the mutual exclusion zone protected by the backward lock but not vice versa. For example, in iscsi_conn_teardown or in iscsi_xmit_data when there is a failure and __iscsi_put_task is called, the backward lock is taken while the forward lock is still taken. On the other hand, if in the RX path a nop is to be sent, for example in iscsi_handle_reject or __iscsi_complete_pdu than the forward lock is released and the backward lock is taken for the duration of iscsi_send_nopout, later the backward lock is released and the forward lock is retaken. libiscsi_tcp uses two kernel fifos the r2t pool and the r2t queue. The insertion and deletion from these queues didn't corespond to the assumption taken by the new forward/backwards session locking paradigm. That is, in iscsi_tcp_clenup_task which belongs to the RX (backwards) path, r2t is taken out from r2t queue and inserted to the r2t pool. In iscsi_tcp_get_curr_r2t which belong to the TX (forward) path, r2t is also inserted to the r2t pool and another r2t is pulled from r2t queue. Only in iscsi_tcp_r2t_rsp which is called in the RX path but can requeue to the TX path, r2t is taken from the r2t pool and inserted to the r2t queue. In order to cope with this situation, two spin locks were added, pool2queue and queue2pool. The former protects extracting from the r2t pool and inserting to the r2t queue, and the later protects the extracing from the r2t queue and inserting to the r2t pool. Signed-off-by: Shlomo Pongratz <shlomop@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> [minor fix up to apply cleanly and compile fix] Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2014-02-07 14:41:38 +08:00
* Called with session back_lock
*/
void iscsi_complete_scsi_task(struct iscsi_task *task,
uint32_t exp_cmdsn, uint32_t max_cmdsn)
{
struct iscsi_conn *conn = task->conn;
ISCSI_DBG_SESSION(conn->session, "[itt 0x%x]\n", task->itt);
conn->last_recv = jiffies;
__iscsi_update_cmdsn(conn->session, exp_cmdsn, max_cmdsn);
iscsi_complete_task(task, ISCSI_TASK_COMPLETED);
}
EXPORT_SYMBOL_GPL(iscsi_complete_scsi_task);
/*
* Must be called with back and frwd lock
*/
static bool cleanup_queued_task(struct iscsi_task *task)
{
struct iscsi_conn *conn = task->conn;
bool early_complete = false;
scsi: iscsi: Remove unneeded task state check Commit 5923d64b7ab6 ("scsi: libiscsi: Drop taskqueuelock") added an extra task->state because for commit 6f8830f5bbab ("scsi: libiscsi: add lock around task lists to fix list corruption regression") we didn't know why we ended up with cmds on the list and thought it might have been a bad target sending a response while we were still sending the cmd. We were never able to get a target to send us a response early, because it turns out the bug was just a race in libiscsi/libiscsi_tcp where: 1. iscsi_tcp_r2t_rsp() queues a r2t to tcp_task->r2tqueue. 2. iscsi_tcp_task_xmit() runs iscsi_tcp_get_curr_r2t() and sees we have a r2t. It dequeues it and iscsi_tcp_task_xmit() starts to process it. 3. iscsi_tcp_r2t_rsp() runs iscsi_requeue_task() and puts the task on the requeue list. 4. iscsi_tcp_task_xmit() sends the data for r2t. This is the final chunk of data, so the cmd is done. 5. target sends the response. 6. On a different CPU from #3, iscsi_complete_task() processes the response. Since there was no common lock for the list, the lists/tasks pointers are not fully in sync, so could end up with list corruption. Since it was just a race on our side, remove the extra check and fix up the comments. Link: https://lore.kernel.org/r/20220616224557.115234-7-michael.christie@oracle.com Reviewed-by: Wu Bo <wubo40@huawei.com> Reviewed-by: Lee Duncan <lduncan@suse.com> Signed-off-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-06-17 06:45:54 +08:00
/*
* We might have raced where we handled a R2T early and got a response
* but have not yet taken the task off the requeue list, then a TMF or
* recovery happened and so we can still see it here.
*/
if (task->state == ISCSI_TASK_COMPLETED)
early_complete = true;
if (!list_empty(&task->running)) {
list_del_init(&task->running);
/*
scsi: iscsi: Remove unneeded task state check Commit 5923d64b7ab6 ("scsi: libiscsi: Drop taskqueuelock") added an extra task->state because for commit 6f8830f5bbab ("scsi: libiscsi: add lock around task lists to fix list corruption regression") we didn't know why we ended up with cmds on the list and thought it might have been a bad target sending a response while we were still sending the cmd. We were never able to get a target to send us a response early, because it turns out the bug was just a race in libiscsi/libiscsi_tcp where: 1. iscsi_tcp_r2t_rsp() queues a r2t to tcp_task->r2tqueue. 2. iscsi_tcp_task_xmit() runs iscsi_tcp_get_curr_r2t() and sees we have a r2t. It dequeues it and iscsi_tcp_task_xmit() starts to process it. 3. iscsi_tcp_r2t_rsp() runs iscsi_requeue_task() and puts the task on the requeue list. 4. iscsi_tcp_task_xmit() sends the data for r2t. This is the final chunk of data, so the cmd is done. 5. target sends the response. 6. On a different CPU from #3, iscsi_complete_task() processes the response. Since there was no common lock for the list, the lists/tasks pointers are not fully in sync, so could end up with list corruption. Since it was just a race on our side, remove the extra check and fix up the comments. Link: https://lore.kernel.org/r/20220616224557.115234-7-michael.christie@oracle.com Reviewed-by: Wu Bo <wubo40@huawei.com> Reviewed-by: Lee Duncan <lduncan@suse.com> Signed-off-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-06-17 06:45:54 +08:00
* If it's on a list but still running this could be cleanup
* from a TMF or session recovery.
*/
if (task->state == ISCSI_TASK_RUNNING ||
task->state == ISCSI_TASK_COMPLETED)
__iscsi_put_task(task);
}
if (conn->session->running_aborted_task == task) {
conn->session->running_aborted_task = NULL;
__iscsi_put_task(task);
}
if (conn->task == task) {
conn->task = NULL;
__iscsi_put_task(task);
}
return early_complete;
}
/*
scsi: iscsi: Remove iscsi_get_task back_lock requirement We currently require that the back_lock is held when calling the functions that manipulate the iscsi_task refcount. The only reason for this is to handle races where we are handling SCSI-ml EH callbacks and the cmd is completing at the same time the normal completion path is running, and we can't return from the EH callback until the driver has stopped accessing the cmd. Holding the back_lock while also accessing the task->state made it simple to check that a cmd is completing and also get/put a refcount at the same time, and at the time we were not as concerned about performance. The problem is that we don't want to take the back_lock from the xmit path for normal I/O since it causes contention with the completion path if the user has chosen to try and split those paths on different CPUs (in this case abusing the CPUs and ignoring caching improves perf for some uses). Begins to remove the back_lock requirement for iscsi_get/put_task by removing the requirement for the get path. Instead of always holding the back_lock we detect if something has done the last put and is about to call iscsi_free_task(). A subsequent commit will then allow iSCSI code to do the last put on a task and only grab the back_lock if the refcount is now zero and it's going to call iscsi_free_task(). Link: https://lore.kernel.org/r/20220616224557.115234-8-michael.christie@oracle.com Reviewed-by: Lee Duncan <lduncan@suse.com> Signed-off-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-06-17 06:45:55 +08:00
* session back and frwd lock must be held and if not called for a task that
* is still pending or from the xmit thread, then xmit thread must be suspended
*/
scsi: iscsi: Remove iscsi_get_task back_lock requirement We currently require that the back_lock is held when calling the functions that manipulate the iscsi_task refcount. The only reason for this is to handle races where we are handling SCSI-ml EH callbacks and the cmd is completing at the same time the normal completion path is running, and we can't return from the EH callback until the driver has stopped accessing the cmd. Holding the back_lock while also accessing the task->state made it simple to check that a cmd is completing and also get/put a refcount at the same time, and at the time we were not as concerned about performance. The problem is that we don't want to take the back_lock from the xmit path for normal I/O since it causes contention with the completion path if the user has chosen to try and split those paths on different CPUs (in this case abusing the CPUs and ignoring caching improves perf for some uses). Begins to remove the back_lock requirement for iscsi_get/put_task by removing the requirement for the get path. Instead of always holding the back_lock we detect if something has done the last put and is about to call iscsi_free_task(). A subsequent commit will then allow iSCSI code to do the last put on a task and only grab the back_lock if the refcount is now zero and it's going to call iscsi_free_task(). Link: https://lore.kernel.org/r/20220616224557.115234-8-michael.christie@oracle.com Reviewed-by: Lee Duncan <lduncan@suse.com> Signed-off-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-06-17 06:45:55 +08:00
static void __fail_scsi_task(struct iscsi_task *task, int err)
{
struct iscsi_conn *conn = task->conn;
struct scsi_cmnd *sc;
int state;
scsi: iscsi: Remove iscsi_get_task back_lock requirement We currently require that the back_lock is held when calling the functions that manipulate the iscsi_task refcount. The only reason for this is to handle races where we are handling SCSI-ml EH callbacks and the cmd is completing at the same time the normal completion path is running, and we can't return from the EH callback until the driver has stopped accessing the cmd. Holding the back_lock while also accessing the task->state made it simple to check that a cmd is completing and also get/put a refcount at the same time, and at the time we were not as concerned about performance. The problem is that we don't want to take the back_lock from the xmit path for normal I/O since it causes contention with the completion path if the user has chosen to try and split those paths on different CPUs (in this case abusing the CPUs and ignoring caching improves perf for some uses). Begins to remove the back_lock requirement for iscsi_get/put_task by removing the requirement for the get path. Instead of always holding the back_lock we detect if something has done the last put and is about to call iscsi_free_task(). A subsequent commit will then allow iSCSI code to do the last put on a task and only grab the back_lock if the refcount is now zero and it's going to call iscsi_free_task(). Link: https://lore.kernel.org/r/20220616224557.115234-8-michael.christie@oracle.com Reviewed-by: Lee Duncan <lduncan@suse.com> Signed-off-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-06-17 06:45:55 +08:00
if (cleanup_queued_task(task))
return;
if (task->state == ISCSI_TASK_PENDING) {
/*
* cmd never made it to the xmit thread, so we should not count
* the cmd in the sequencing
*/
conn->session->queued_cmdsn--;
/* it was never sent so just complete like normal */
state = ISCSI_TASK_COMPLETED;
} else if (err == DID_TRANSPORT_DISRUPTED)
state = ISCSI_TASK_ABRT_SESS_RECOV;
else
state = ISCSI_TASK_ABRT_TMF;
scsi: libiscsi: Fix iscsi_task use after free() The following bug was reported and debugged by wubo40@huawei.com: When testing kernel 4.18 version, NULL pointer dereference problem occurs in iscsi_eh_cmd_timed_out() function. I think this bug in the upstream is still exists. The analysis reasons are as follows: 1) For some reason, I/O command did not complete within the timeout period. The block layer timer works, call scsi_times_out() to handle I/O timeout logic. At the same time the command just completes. 2) scsi_times_out() call iscsi_eh_cmd_timed_out() to process timeout logic. Although there is an NULL judgment for the task, the task has not been released yet now. 3) iscsi_complete_task() calls __iscsi_put_task(). The task reference count reaches zero, the conditions for free task is met, then iscsi_free_task() frees the task, and sets sc->SCp.ptr = NULL. After iscsi_eh_cmd_timed_out() passes the task judgment check, there can still be NULL dereference scenarios. CPU0 CPU3 |- scsi_times_out() |- iscsi_complete_task() | | |- iscsi_eh_cmd_timed_out() |- __iscsi_put_task() | | |- task=sc->SCp.ptr, task is not NUL, check passed |- iscsi_free_task(task) | | | |-> sc->SCp.ptr = NULL | | |- task is NULL now, NULL pointer dereference | | | \|/ \|/ Calltrace: [380751.840862] BUG: unable to handle kernel NULL pointer dereference at 0000000000000138 [380751.843709] PGD 0 P4D 0 [380751.844770] Oops: 0000 [#1] SMP PTI [380751.846283] CPU: 0 PID: 403 Comm: kworker/0:1H Kdump: loaded Tainted: G [380751.851467] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996) [380751.856521] Workqueue: kblockd blk_mq_timeout_work [380751.858527] RIP: 0010:iscsi_eh_cmd_timed_out+0x15e/0x2e0 [libiscsi] [380751.861129] Code: 83 ea 01 48 8d 74 d0 08 48 8b 10 48 8b 4a 50 48 85 c9 74 2c 48 39 d5 74 [380751.868811] RSP: 0018:ffffc1e280a5fd58 EFLAGS: 00010246 [380751.870978] RAX: ffff9fd1e84e15e0 RBX: ffff9fd1e84e6dd0 RCX: 0000000116acc580 [380751.873791] RDX: ffff9fd1f97a9400 RSI: ffff9fd1e84e1800 RDI: ffff9fd1e4d6d420 [380751.876059] RBP: ffff9fd1e4d49000 R08: 0000000116acc580 R09: 0000000116acc580 [380751.878284] R10: 0000000000000000 R11: 0000000000000000 R12: ffff9fd1e6e931e8 [380751.880500] R13: ffff9fd1e84e6ee0 R14: 0000000000000010 R15: 0000000000000003 [380751.882687] FS: 0000000000000000(0000) GS:ffff9fd1fac00000(0000) knlGS:0000000000000000 [380751.885236] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [380751.887059] CR2: 0000000000000138 CR3: 000000011860a001 CR4: 00000000003606f0 [380751.889308] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [380751.891523] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [380751.893738] Call Trace: [380751.894639] scsi_times_out+0x60/0x1c0 [380751.895861] blk_mq_check_expired+0x144/0x200 [380751.897302] ? __switch_to_asm+0x35/0x70 [380751.898551] blk_mq_queue_tag_busy_iter+0x195/0x2e0 [380751.900091] ? __blk_mq_requeue_request+0x100/0x100 [380751.901611] ? __switch_to_asm+0x41/0x70 [380751.902853] ? __blk_mq_requeue_request+0x100/0x100 [380751.904398] blk_mq_timeout_work+0x54/0x130 [380751.905740] process_one_work+0x195/0x390 [380751.907228] worker_thread+0x30/0x390 [380751.908713] ? process_one_work+0x390/0x390 [380751.910350] kthread+0x10d/0x130 [380751.911470] ? kthread_flush_work_fn+0x10/0x10 [380751.913007] ret_from_fork+0x35/0x40 crash> dis -l iscsi_eh_cmd_timed_out+0x15e xxxxx/drivers/scsi/libiscsi.c: 2062 1970 enum blk_eh_timer_return iscsi_eh_cmd_timed_out(struct scsi_cmnd *sc) { ... 1984 spin_lock_bh(&session->frwd_lock); 1985 task = (struct iscsi_task *)sc->SCp.ptr; 1986 if (!task) { 1987 /* 1988 * Raced with completion. Blk layer has taken ownership 1989 * so let timeout code complete it now. 1990 */ 1991 rc = BLK_EH_DONE; 1992 goto done; 1993 } ... 2052 for (i = 0; i < conn->session->cmds_max; i++) { 2053 running_task = conn->session->cmds[i]; 2054 if (!running_task->sc || running_task == task || 2055 running_task->state != ISCSI_TASK_RUNNING) 2056 continue; 2057 2058 /* 2059 * Only check if cmds started before this one have made 2060 * progress, or this could never fail 2061 */ 2062 if (time_after(running_task->sc->jiffies_at_alloc, 2063 task->sc->jiffies_at_alloc)) <--- 2064 continue; 2065 ... } carsh> struct scsi_cmnd ffff9fd1e6e931e8 struct scsi_cmnd { ... SCp = { ptr = 0x0, <--- iscsi_task this_residual = 0, ... }, } To prevent this, we take a ref to the cmd under the back (completion) lock so if the completion side were to call iscsi_complete_task() on the task while the timer/eh paths are not holding the back_lock it will not be freed from under us. Note that this requires the previous patch, "scsi: libiscsi: Drop taskqueuelock" because bnx2i sleeps in its cleanup_task callout if the cmd is aborted. If the EH/timer and completion path are racing we don't know which path will do the last put. The previous patch moved the operations we needed to do under the forward lock to cleanup_queued_task. Once that has run we can drop the forward lock for the cmd and bnx2i no longer has to worry about if the EH, timer or completion path did the ast put and if the forward lock is held or not since it won't be. Link: https://lore.kernel.org/r/20210207044608.27585-4-michael.christie@oracle.com Reported-by: Wu Bo <wubo40@huawei.com> Reviewed-by: Lee Duncan <lduncan@suse.com> Signed-off-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-02-07 12:46:02 +08:00
sc = task->sc;
sc->result = err << 16;
scsi_set_resid(sc, scsi_bufflen(sc));
iscsi_complete_task(task, state);
scsi: iscsi: Remove iscsi_get_task back_lock requirement We currently require that the back_lock is held when calling the functions that manipulate the iscsi_task refcount. The only reason for this is to handle races where we are handling SCSI-ml EH callbacks and the cmd is completing at the same time the normal completion path is running, and we can't return from the EH callback until the driver has stopped accessing the cmd. Holding the back_lock while also accessing the task->state made it simple to check that a cmd is completing and also get/put a refcount at the same time, and at the time we were not as concerned about performance. The problem is that we don't want to take the back_lock from the xmit path for normal I/O since it causes contention with the completion path if the user has chosen to try and split those paths on different CPUs (in this case abusing the CPUs and ignoring caching improves perf for some uses). Begins to remove the back_lock requirement for iscsi_get/put_task by removing the requirement for the get path. Instead of always holding the back_lock we detect if something has done the last put and is about to call iscsi_free_task(). A subsequent commit will then allow iSCSI code to do the last put on a task and only grab the back_lock if the refcount is now zero and it's going to call iscsi_free_task(). Link: https://lore.kernel.org/r/20220616224557.115234-8-michael.christie@oracle.com Reviewed-by: Lee Duncan <lduncan@suse.com> Signed-off-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-06-17 06:45:55 +08:00
}
static void fail_scsi_task(struct iscsi_task *task, int err)
{
struct iscsi_session *session = task->conn->session;
spin_lock_bh(&session->back_lock);
__fail_scsi_task(task, err);
spin_unlock_bh(&session->back_lock);
}
static int iscsi_prep_mgmt_task(struct iscsi_conn *conn,
struct iscsi_task *task)
{
struct iscsi_session *session = conn->session;
struct iscsi_hdr *hdr = task->hdr;
struct iscsi_nopout *nop = (struct iscsi_nopout *)hdr;
uint8_t opcode = hdr->opcode & ISCSI_OPCODE_MASK;
if (conn->session->state == ISCSI_STATE_LOGGING_OUT)
return -ENOTCONN;
if (opcode != ISCSI_OP_LOGIN && opcode != ISCSI_OP_TEXT)
nop->exp_statsn = cpu_to_be32(conn->exp_statsn);
/*
* pre-format CmdSN for outgoing PDU.
*/
nop->cmdsn = cpu_to_be32(session->cmdsn);
if (hdr->itt != RESERVED_ITT) {
/*
* TODO: We always use immediate for normal session pdus.
* If we start to send tmfs or nops as non-immediate then
* we should start checking the cmdsn numbers for mgmt tasks.
*
* During discovery sessions iscsid sends TEXT as non immediate,
* but we always only send one PDU at a time.
*/
if (conn->c_stage == ISCSI_CONN_STARTED &&
!(hdr->opcode & ISCSI_OP_IMMEDIATE)) {
session->queued_cmdsn++;
session->cmdsn++;
}
}
if (session->tt->init_task && session->tt->init_task(task))
return -EIO;
if ((hdr->opcode & ISCSI_OPCODE_MASK) == ISCSI_OP_LOGOUT)
session->state = ISCSI_STATE_LOGGING_OUT;
task->state = ISCSI_TASK_RUNNING;
ISCSI_DBG_SESSION(session, "mgmtpdu [op 0x%x hdr->itt 0x%x "
"datalen %d]\n", hdr->opcode & ISCSI_OPCODE_MASK,
hdr->itt, task->data_count);
return 0;
}
/**
* iscsi_alloc_mgmt_task - allocate and setup a mgmt task.
* @conn: iscsi conn that the task will be sent on.
* @hdr: iscsi pdu that will be sent.
* @data: buffer for data segment if needed.
* @data_size: length of data in bytes.
*/
static struct iscsi_task *
iscsi_alloc_mgmt_task(struct iscsi_conn *conn, struct iscsi_hdr *hdr,
char *data, uint32_t data_size)
{
struct iscsi_session *session = conn->session;
uint8_t opcode = hdr->opcode & ISCSI_OPCODE_MASK;
struct iscsi_task *task;
itt_t itt;
if (session->state == ISCSI_STATE_TERMINATE ||
!test_bit(ISCSI_CONN_FLAG_BOUND, &conn->flags))
return NULL;
if (opcode == ISCSI_OP_LOGIN || opcode == ISCSI_OP_TEXT) {
/*
* Login and Text are sent serially, in
* request-followed-by-response sequence.
* Same task can be used. Same ITT must be used.
* Note that login_task is preallocated at conn_create().
*/
if (conn->login_task->state != ISCSI_TASK_FREE) {
iscsi_conn_printk(KERN_ERR, conn, "Login/Text in "
"progress. Cannot start new task.\n");
return NULL;
}
if (data_size > ISCSI_DEF_MAX_RECV_SEG_LEN) {
iscsi_conn_printk(KERN_ERR, conn, "Invalid buffer len of %u for login task. Max len is %u\n", data_size, ISCSI_DEF_MAX_RECV_SEG_LEN);
return NULL;
}
task = conn->login_task;
} else {
if (session->state != ISCSI_STATE_LOGGED_IN)
return NULL;
if (data_size != 0) {
iscsi_conn_printk(KERN_ERR, conn, "Can not send data buffer of len %u for op 0x%x\n", data_size, opcode);
return NULL;
}
BUG_ON(conn->c_stage == ISCSI_CONN_INITIAL_STAGE);
BUG_ON(conn->c_stage == ISCSI_CONN_STOPPED);
if (!kfifo_out(&session->cmdpool.queue,
(void*)&task, sizeof(void*)))
return NULL;
}
/*
* released in complete pdu for task we expect a response for, and
* released by the lld when it has transmitted the task for
* pdus we do not expect a response for.
*/
refcount_set(&task->refcount, 1);
task->conn = conn;
task->sc = NULL;
INIT_LIST_HEAD(&task->running);
task->state = ISCSI_TASK_PENDING;
if (data_size) {
memcpy(task->data, data, data_size);
task->data_count = data_size;
} else
task->data_count = 0;
if (conn->session->tt->alloc_pdu) {
if (conn->session->tt->alloc_pdu(task, hdr->opcode)) {
iscsi_conn_printk(KERN_ERR, conn, "Could not allocate "
"pdu for mgmt task.\n");
goto free_task;
}
}
itt = task->hdr->itt;
task->hdr_len = sizeof(struct iscsi_hdr);
memcpy(task->hdr, hdr, sizeof(struct iscsi_hdr));
if (hdr->itt != RESERVED_ITT) {
if (session->tt->parse_pdu_itt)
task->hdr->itt = itt;
else
task->hdr->itt = build_itt(task->itt,
task->conn->session->age);
}
return task;
free_task:
iscsi_put_task(task);
return NULL;
}
/**
* iscsi_send_mgmt_task - Send task created with iscsi_alloc_mgmt_task.
* @task: iscsi task to send.
*
* On failure this returns a non-zero error code, and the driver must free
* the task with iscsi_put_task;
*/
static int iscsi_send_mgmt_task(struct iscsi_task *task)
{
struct iscsi_conn *conn = task->conn;
struct iscsi_session *session = conn->session;
struct iscsi_host *ihost = shost_priv(conn->session->host);
int rc = 0;
if (!ihost->workq) {
rc = iscsi_prep_mgmt_task(conn, task);
if (rc)
return rc;
rc = session->tt->xmit_task(task);
if (rc)
return rc;
} else {
list_add_tail(&task->running, &conn->mgmtqueue);
iscsi_conn_queue_xmit(conn);
}
return 0;
}
static int __iscsi_conn_send_pdu(struct iscsi_conn *conn, struct iscsi_hdr *hdr,
char *data, uint32_t data_size)
{
struct iscsi_task *task;
int rc;
task = iscsi_alloc_mgmt_task(conn, hdr, data, data_size);
if (!task)
return -ENOMEM;
rc = iscsi_send_mgmt_task(task);
if (rc)
iscsi_put_task(task);
return rc;
}
int iscsi_conn_send_pdu(struct iscsi_cls_conn *cls_conn, struct iscsi_hdr *hdr,
char *data, uint32_t data_size)
{
struct iscsi_conn *conn = cls_conn->dd_data;
struct iscsi_session *session = conn->session;
int err = 0;
[SCSI] libiscsi: Reduce locking contention in fast path Replace the session lock with two locks, a forward lock and a backwards lock named frwd_lock and back_lock respectively. The forward lock protects resources that change while sending a request to the target, such as cmdsn, queued_cmdsn, and allocating task from the commands' pool with kfifo_out. The backward lock protects resources that change while processing a response or in error path, such as cmdsn_exp, cmdsn_max, and returning tasks to the commands' pool with kfifo_in. Under a steady state fast-path situation, that is when one or more processes/threads submit IO to an iscsi device and a single kernel upcall (e.g softirq) is dealing with processing of responses without errors, this patch eliminates the contention between the queuecommand()/request response/scsi_done() flows associated with iscsi sessions. Between the forward and the backward locks exists a strict locking hierarchy. The mutual exclusion zone protected by the forward lock can enclose the mutual exclusion zone protected by the backward lock but not vice versa. For example, in iscsi_conn_teardown or in iscsi_xmit_data when there is a failure and __iscsi_put_task is called, the backward lock is taken while the forward lock is still taken. On the other hand, if in the RX path a nop is to be sent, for example in iscsi_handle_reject or __iscsi_complete_pdu than the forward lock is released and the backward lock is taken for the duration of iscsi_send_nopout, later the backward lock is released and the forward lock is retaken. libiscsi_tcp uses two kernel fifos the r2t pool and the r2t queue. The insertion and deletion from these queues didn't corespond to the assumption taken by the new forward/backwards session locking paradigm. That is, in iscsi_tcp_clenup_task which belongs to the RX (backwards) path, r2t is taken out from r2t queue and inserted to the r2t pool. In iscsi_tcp_get_curr_r2t which belong to the TX (forward) path, r2t is also inserted to the r2t pool and another r2t is pulled from r2t queue. Only in iscsi_tcp_r2t_rsp which is called in the RX path but can requeue to the TX path, r2t is taken from the r2t pool and inserted to the r2t queue. In order to cope with this situation, two spin locks were added, pool2queue and queue2pool. The former protects extracting from the r2t pool and inserting to the r2t queue, and the later protects the extracing from the r2t queue and inserting to the r2t pool. Signed-off-by: Shlomo Pongratz <shlomop@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> [minor fix up to apply cleanly and compile fix] Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2014-02-07 14:41:38 +08:00
spin_lock_bh(&session->frwd_lock);
if (__iscsi_conn_send_pdu(conn, hdr, data, data_size))
err = -EPERM;
[SCSI] libiscsi: Reduce locking contention in fast path Replace the session lock with two locks, a forward lock and a backwards lock named frwd_lock and back_lock respectively. The forward lock protects resources that change while sending a request to the target, such as cmdsn, queued_cmdsn, and allocating task from the commands' pool with kfifo_out. The backward lock protects resources that change while processing a response or in error path, such as cmdsn_exp, cmdsn_max, and returning tasks to the commands' pool with kfifo_in. Under a steady state fast-path situation, that is when one or more processes/threads submit IO to an iscsi device and a single kernel upcall (e.g softirq) is dealing with processing of responses without errors, this patch eliminates the contention between the queuecommand()/request response/scsi_done() flows associated with iscsi sessions. Between the forward and the backward locks exists a strict locking hierarchy. The mutual exclusion zone protected by the forward lock can enclose the mutual exclusion zone protected by the backward lock but not vice versa. For example, in iscsi_conn_teardown or in iscsi_xmit_data when there is a failure and __iscsi_put_task is called, the backward lock is taken while the forward lock is still taken. On the other hand, if in the RX path a nop is to be sent, for example in iscsi_handle_reject or __iscsi_complete_pdu than the forward lock is released and the backward lock is taken for the duration of iscsi_send_nopout, later the backward lock is released and the forward lock is retaken. libiscsi_tcp uses two kernel fifos the r2t pool and the r2t queue. The insertion and deletion from these queues didn't corespond to the assumption taken by the new forward/backwards session locking paradigm. That is, in iscsi_tcp_clenup_task which belongs to the RX (backwards) path, r2t is taken out from r2t queue and inserted to the r2t pool. In iscsi_tcp_get_curr_r2t which belong to the TX (forward) path, r2t is also inserted to the r2t pool and another r2t is pulled from r2t queue. Only in iscsi_tcp_r2t_rsp which is called in the RX path but can requeue to the TX path, r2t is taken from the r2t pool and inserted to the r2t queue. In order to cope with this situation, two spin locks were added, pool2queue and queue2pool. The former protects extracting from the r2t pool and inserting to the r2t queue, and the later protects the extracing from the r2t queue and inserting to the r2t pool. Signed-off-by: Shlomo Pongratz <shlomop@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> [minor fix up to apply cleanly and compile fix] Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2014-02-07 14:41:38 +08:00
spin_unlock_bh(&session->frwd_lock);
return err;
}
EXPORT_SYMBOL_GPL(iscsi_conn_send_pdu);
/**
* iscsi_scsi_cmd_rsp - SCSI Command Response processing
* @conn: iscsi connection
* @hdr: iscsi header
* @task: scsi command task
* @data: cmd data buffer
* @datalen: len of buffer
*
* iscsi_cmd_rsp sets up the scsi_cmnd fields based on the PDU and
* then completes the command and task. called under back_lock
**/
static void iscsi_scsi_cmd_rsp(struct iscsi_conn *conn, struct iscsi_hdr *hdr,
struct iscsi_task *task, char *data,
int datalen)
{
struct iscsi_scsi_rsp *rhdr = (struct iscsi_scsi_rsp *)hdr;
struct iscsi_session *session = conn->session;
struct scsi_cmnd *sc = task->sc;
iscsi_update_cmdsn(session, (struct iscsi_nopin*)rhdr);
conn->exp_statsn = be32_to_cpu(rhdr->statsn) + 1;
sc->result = (DID_OK << 16) | rhdr->cmd_status;
if (task->protected) {
sector_t sector;
u8 ascq;
/**
* Transports that didn't implement check_protection
* callback but still published T10-PI support to scsi-mid
* deserve this BUG_ON.
**/
BUG_ON(!session->tt->check_protection);
ascq = session->tt->check_protection(task, &sector);
if (ascq) {
scsi_build_sense(sc, 1, ILLEGAL_REQUEST, 0x10, ascq);
scsi_set_sense_information(sc->sense_buffer,
SCSI_SENSE_BUFFERSIZE,
sector);
goto out;
}
}
if (rhdr->response != ISCSI_STATUS_CMD_COMPLETED) {
sc->result = DID_ERROR << 16;
goto out;
}
if (rhdr->cmd_status == SAM_STAT_CHECK_CONDITION) {
uint16_t senselen;
if (datalen < 2) {
invalid_datalen:
iscsi_conn_printk(KERN_ERR, conn,
"Got CHECK_CONDITION but invalid data "
"buffer size of %d\n", datalen);
sc->result = DID_BAD_TARGET << 16;
goto out;
}
senselen = get_unaligned_be16(data);
if (datalen < senselen)
goto invalid_datalen;
memcpy(sc->sense_buffer, data + 2,
min_t(uint16_t, senselen, SCSI_SENSE_BUFFERSIZE));
ISCSI_DBG_SESSION(session, "copied %d bytes of sense\n",
min_t(uint16_t, senselen,
SCSI_SENSE_BUFFERSIZE));
}
if (rhdr->flags & (ISCSI_FLAG_CMD_BIDI_UNDERFLOW |
ISCSI_FLAG_CMD_BIDI_OVERFLOW)) {
sc->result = (DID_BAD_TARGET << 16) | rhdr->cmd_status;
}
if (rhdr->flags & (ISCSI_FLAG_CMD_UNDERFLOW |
ISCSI_FLAG_CMD_OVERFLOW)) {
int res_count = be32_to_cpu(rhdr->residual_count);
if (res_count > 0 &&
(rhdr->flags & ISCSI_FLAG_CMD_OVERFLOW ||
res_count <= scsi_bufflen(sc)))
/* write side for bidi or uni-io set_resid */
scsi_set_resid(sc, res_count);
else
sc->result = (DID_BAD_TARGET << 16) | rhdr->cmd_status;
}
out:
ISCSI_DBG_SESSION(session, "cmd rsp done [sc %p res %d itt 0x%x]\n",
sc, sc->result, task->itt);
conn->scsirsp_pdus_cnt++;
iscsi_complete_task(task, ISCSI_TASK_COMPLETED);
}
/**
* iscsi_data_in_rsp - SCSI Data-In Response processing
* @conn: iscsi connection
* @hdr: iscsi pdu
* @task: scsi command task
*
* iscsi_data_in_rsp sets up the scsi_cmnd fields based on the data received
* then completes the command and task. called under back_lock
**/
static void
iscsi_data_in_rsp(struct iscsi_conn *conn, struct iscsi_hdr *hdr,
struct iscsi_task *task)
{
struct iscsi_data_rsp *rhdr = (struct iscsi_data_rsp *)hdr;
struct scsi_cmnd *sc = task->sc;
if (!(rhdr->flags & ISCSI_FLAG_DATA_STATUS))
return;
iscsi_update_cmdsn(conn->session, (struct iscsi_nopin *)hdr);
sc->result = (DID_OK << 16) | rhdr->cmd_status;
conn->exp_statsn = be32_to_cpu(rhdr->statsn) + 1;
if (rhdr->flags & (ISCSI_FLAG_DATA_UNDERFLOW |
ISCSI_FLAG_DATA_OVERFLOW)) {
int res_count = be32_to_cpu(rhdr->residual_count);
if (res_count > 0 &&
(rhdr->flags & ISCSI_FLAG_CMD_OVERFLOW ||
res_count <= sc->sdb.length))
scsi_set_resid(sc, res_count);
else
sc->result = (DID_BAD_TARGET << 16) | rhdr->cmd_status;
}
ISCSI_DBG_SESSION(conn->session, "data in with status done "
"[sc %p res %d itt 0x%x]\n",
sc, sc->result, task->itt);
conn->scsirsp_pdus_cnt++;
iscsi_complete_task(task, ISCSI_TASK_COMPLETED);
}
static void iscsi_tmf_rsp(struct iscsi_conn *conn, struct iscsi_hdr *hdr)
{
struct iscsi_tm_rsp *tmf = (struct iscsi_tm_rsp *)hdr;
struct iscsi_session *session = conn->session;
conn->exp_statsn = be32_to_cpu(hdr->statsn) + 1;
conn->tmfrsp_pdus_cnt++;
if (session->tmf_state != TMF_QUEUED)
return;
if (tmf->response == ISCSI_TMF_RSP_COMPLETE)
session->tmf_state = TMF_SUCCESS;
else if (tmf->response == ISCSI_TMF_RSP_NO_TASK)
session->tmf_state = TMF_NOT_FOUND;
else
session->tmf_state = TMF_FAILED;
wake_up(&session->ehwait);
}
static int iscsi_send_nopout(struct iscsi_conn *conn, struct iscsi_nopin *rhdr)
{
struct iscsi_nopout hdr;
struct iscsi_task *task;
if (!rhdr) {
if (READ_ONCE(conn->ping_task))
return -EINVAL;
}
memset(&hdr, 0, sizeof(struct iscsi_nopout));
hdr.opcode = ISCSI_OP_NOOP_OUT | ISCSI_OP_IMMEDIATE;
hdr.flags = ISCSI_FLAG_CMD_FINAL;
if (rhdr) {
hdr.lun = rhdr->lun;
hdr.ttt = rhdr->ttt;
hdr.itt = RESERVED_ITT;
} else
hdr.ttt = RESERVED_ITT;
task = iscsi_alloc_mgmt_task(conn, (struct iscsi_hdr *)&hdr, NULL, 0);
if (!task)
return -ENOMEM;
if (!rhdr)
WRITE_ONCE(conn->ping_task, task);
if (iscsi_send_mgmt_task(task)) {
if (!rhdr)
WRITE_ONCE(conn->ping_task, NULL);
iscsi_put_task(task);
iscsi_conn_printk(KERN_ERR, conn, "Could not send nopout\n");
return -EIO;
} else if (!rhdr) {
/* only track our nops */
conn->last_ping = jiffies;
}
return 0;
}
/**
* iscsi_nop_out_rsp - SCSI NOP Response processing
* @task: scsi command task
* @nop: the nop structure
* @data: where to put the data
* @datalen: length of data
*
* iscsi_nop_out_rsp handles nop response from use or
* from user space. called under back_lock
**/
static int iscsi_nop_out_rsp(struct iscsi_task *task,
struct iscsi_nopin *nop, char *data, int datalen)
{
struct iscsi_conn *conn = task->conn;
int rc = 0;
if (READ_ONCE(conn->ping_task) != task) {
/*
* If this is not in response to one of our
* nops then it must be from userspace.
*/
if (iscsi_recv_pdu(conn->cls_conn, (struct iscsi_hdr *)nop,
data, datalen))
rc = ISCSI_ERR_CONN_FAILED;
} else
mod_timer(&conn->transport_timer, jiffies + conn->recv_timeout);
iscsi_complete_task(task, ISCSI_TASK_COMPLETED);
return rc;
}
2006-09-01 06:09:27 +08:00
static int iscsi_handle_reject(struct iscsi_conn *conn, struct iscsi_hdr *hdr,
char *data, int datalen)
{
struct iscsi_reject *reject = (struct iscsi_reject *)hdr;
struct iscsi_hdr rejected_pdu;
int opcode, rc = 0;
2006-09-01 06:09:27 +08:00
conn->exp_statsn = be32_to_cpu(reject->statsn) + 1;
if (ntoh24(reject->dlength) > datalen ||
ntoh24(reject->dlength) < sizeof(struct iscsi_hdr)) {
iscsi_conn_printk(KERN_ERR, conn, "Cannot handle rejected "
"pdu. Invalid data length (pdu dlength "
"%u, datalen %d\n", ntoh24(reject->dlength),
datalen);
return ISCSI_ERR_PROTO;
}
memcpy(&rejected_pdu, data, sizeof(struct iscsi_hdr));
opcode = rejected_pdu.opcode & ISCSI_OPCODE_MASK;
switch (reject->reason) {
case ISCSI_REASON_DATA_DIGEST_ERROR:
iscsi_conn_printk(KERN_ERR, conn,
"pdu (op 0x%x itt 0x%x) rejected "
"due to DataDigest error.\n",
opcode, rejected_pdu.itt);
break;
case ISCSI_REASON_IMM_CMD_REJECT:
iscsi_conn_printk(KERN_ERR, conn,
"pdu (op 0x%x itt 0x%x) rejected. Too many "
"immediate commands.\n",
opcode, rejected_pdu.itt);
/*
* We only send one TMF at a time so if the target could not
* handle it, then it should get fixed (RFC mandates that
* a target can handle one immediate TMF per conn).
*
* For nops-outs, we could have sent more than one if
* the target is sending us lots of nop-ins
*/
if (opcode != ISCSI_OP_NOOP_OUT)
return 0;
2006-09-01 06:09:27 +08:00
if (rejected_pdu.itt == cpu_to_be32(ISCSI_RESERVED_TAG)) {
/*
* nop-out in response to target's nop-out rejected.
* Just resend.
*/
[SCSI] libiscsi: Reduce locking contention in fast path Replace the session lock with two locks, a forward lock and a backwards lock named frwd_lock and back_lock respectively. The forward lock protects resources that change while sending a request to the target, such as cmdsn, queued_cmdsn, and allocating task from the commands' pool with kfifo_out. The backward lock protects resources that change while processing a response or in error path, such as cmdsn_exp, cmdsn_max, and returning tasks to the commands' pool with kfifo_in. Under a steady state fast-path situation, that is when one or more processes/threads submit IO to an iscsi device and a single kernel upcall (e.g softirq) is dealing with processing of responses without errors, this patch eliminates the contention between the queuecommand()/request response/scsi_done() flows associated with iscsi sessions. Between the forward and the backward locks exists a strict locking hierarchy. The mutual exclusion zone protected by the forward lock can enclose the mutual exclusion zone protected by the backward lock but not vice versa. For example, in iscsi_conn_teardown or in iscsi_xmit_data when there is a failure and __iscsi_put_task is called, the backward lock is taken while the forward lock is still taken. On the other hand, if in the RX path a nop is to be sent, for example in iscsi_handle_reject or __iscsi_complete_pdu than the forward lock is released and the backward lock is taken for the duration of iscsi_send_nopout, later the backward lock is released and the forward lock is retaken. libiscsi_tcp uses two kernel fifos the r2t pool and the r2t queue. The insertion and deletion from these queues didn't corespond to the assumption taken by the new forward/backwards session locking paradigm. That is, in iscsi_tcp_clenup_task which belongs to the RX (backwards) path, r2t is taken out from r2t queue and inserted to the r2t pool. In iscsi_tcp_get_curr_r2t which belong to the TX (forward) path, r2t is also inserted to the r2t pool and another r2t is pulled from r2t queue. Only in iscsi_tcp_r2t_rsp which is called in the RX path but can requeue to the TX path, r2t is taken from the r2t pool and inserted to the r2t queue. In order to cope with this situation, two spin locks were added, pool2queue and queue2pool. The former protects extracting from the r2t pool and inserting to the r2t queue, and the later protects the extracing from the r2t queue and inserting to the r2t pool. Signed-off-by: Shlomo Pongratz <shlomop@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> [minor fix up to apply cleanly and compile fix] Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2014-02-07 14:41:38 +08:00
/* In RX path we are under back lock */
spin_unlock(&conn->session->back_lock);
spin_lock(&conn->session->frwd_lock);
iscsi_send_nopout(conn,
(struct iscsi_nopin*)&rejected_pdu);
[SCSI] libiscsi: Reduce locking contention in fast path Replace the session lock with two locks, a forward lock and a backwards lock named frwd_lock and back_lock respectively. The forward lock protects resources that change while sending a request to the target, such as cmdsn, queued_cmdsn, and allocating task from the commands' pool with kfifo_out. The backward lock protects resources that change while processing a response or in error path, such as cmdsn_exp, cmdsn_max, and returning tasks to the commands' pool with kfifo_in. Under a steady state fast-path situation, that is when one or more processes/threads submit IO to an iscsi device and a single kernel upcall (e.g softirq) is dealing with processing of responses without errors, this patch eliminates the contention between the queuecommand()/request response/scsi_done() flows associated with iscsi sessions. Between the forward and the backward locks exists a strict locking hierarchy. The mutual exclusion zone protected by the forward lock can enclose the mutual exclusion zone protected by the backward lock but not vice versa. For example, in iscsi_conn_teardown or in iscsi_xmit_data when there is a failure and __iscsi_put_task is called, the backward lock is taken while the forward lock is still taken. On the other hand, if in the RX path a nop is to be sent, for example in iscsi_handle_reject or __iscsi_complete_pdu than the forward lock is released and the backward lock is taken for the duration of iscsi_send_nopout, later the backward lock is released and the forward lock is retaken. libiscsi_tcp uses two kernel fifos the r2t pool and the r2t queue. The insertion and deletion from these queues didn't corespond to the assumption taken by the new forward/backwards session locking paradigm. That is, in iscsi_tcp_clenup_task which belongs to the RX (backwards) path, r2t is taken out from r2t queue and inserted to the r2t pool. In iscsi_tcp_get_curr_r2t which belong to the TX (forward) path, r2t is also inserted to the r2t pool and another r2t is pulled from r2t queue. Only in iscsi_tcp_r2t_rsp which is called in the RX path but can requeue to the TX path, r2t is taken from the r2t pool and inserted to the r2t queue. In order to cope with this situation, two spin locks were added, pool2queue and queue2pool. The former protects extracting from the r2t pool and inserting to the r2t queue, and the later protects the extracing from the r2t queue and inserting to the r2t pool. Signed-off-by: Shlomo Pongratz <shlomop@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> [minor fix up to apply cleanly and compile fix] Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2014-02-07 14:41:38 +08:00
spin_unlock(&conn->session->frwd_lock);
spin_lock(&conn->session->back_lock);
} else {
struct iscsi_task *task;
/*
* Our nop as ping got dropped. We know the target
* and transport are ok so just clean up
*/
task = iscsi_itt_to_task(conn, rejected_pdu.itt);
if (!task) {
iscsi_conn_printk(KERN_ERR, conn,
"Invalid pdu reject. Could "
"not lookup rejected task.\n");
rc = ISCSI_ERR_BAD_ITT;
} else
rc = iscsi_nop_out_rsp(task,
(struct iscsi_nopin*)&rejected_pdu,
NULL, 0);
2006-09-01 06:09:27 +08:00
}
break;
default:
iscsi_conn_printk(KERN_ERR, conn,
"pdu (op 0x%x itt 0x%x) rejected. Reason "
"code 0x%x\n", rejected_pdu.opcode,
rejected_pdu.itt, reject->reason);
break;
2006-09-01 06:09:27 +08:00
}
return rc;
2006-09-01 06:09:27 +08:00
}
/**
* iscsi_itt_to_task - look up task by itt
* @conn: iscsi connection
* @itt: itt
*
* This should be used for mgmt tasks like login and nops, or if
* the LDD's itt space does not include the session age.
*
[SCSI] libiscsi: Reduce locking contention in fast path Replace the session lock with two locks, a forward lock and a backwards lock named frwd_lock and back_lock respectively. The forward lock protects resources that change while sending a request to the target, such as cmdsn, queued_cmdsn, and allocating task from the commands' pool with kfifo_out. The backward lock protects resources that change while processing a response or in error path, such as cmdsn_exp, cmdsn_max, and returning tasks to the commands' pool with kfifo_in. Under a steady state fast-path situation, that is when one or more processes/threads submit IO to an iscsi device and a single kernel upcall (e.g softirq) is dealing with processing of responses without errors, this patch eliminates the contention between the queuecommand()/request response/scsi_done() flows associated with iscsi sessions. Between the forward and the backward locks exists a strict locking hierarchy. The mutual exclusion zone protected by the forward lock can enclose the mutual exclusion zone protected by the backward lock but not vice versa. For example, in iscsi_conn_teardown or in iscsi_xmit_data when there is a failure and __iscsi_put_task is called, the backward lock is taken while the forward lock is still taken. On the other hand, if in the RX path a nop is to be sent, for example in iscsi_handle_reject or __iscsi_complete_pdu than the forward lock is released and the backward lock is taken for the duration of iscsi_send_nopout, later the backward lock is released and the forward lock is retaken. libiscsi_tcp uses two kernel fifos the r2t pool and the r2t queue. The insertion and deletion from these queues didn't corespond to the assumption taken by the new forward/backwards session locking paradigm. That is, in iscsi_tcp_clenup_task which belongs to the RX (backwards) path, r2t is taken out from r2t queue and inserted to the r2t pool. In iscsi_tcp_get_curr_r2t which belong to the TX (forward) path, r2t is also inserted to the r2t pool and another r2t is pulled from r2t queue. Only in iscsi_tcp_r2t_rsp which is called in the RX path but can requeue to the TX path, r2t is taken from the r2t pool and inserted to the r2t queue. In order to cope with this situation, two spin locks were added, pool2queue and queue2pool. The former protects extracting from the r2t pool and inserting to the r2t queue, and the later protects the extracing from the r2t queue and inserting to the r2t pool. Signed-off-by: Shlomo Pongratz <shlomop@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> [minor fix up to apply cleanly and compile fix] Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2014-02-07 14:41:38 +08:00
* The session back_lock must be held.
*/
struct iscsi_task *iscsi_itt_to_task(struct iscsi_conn *conn, itt_t itt)
{
struct iscsi_session *session = conn->session;
int i;
if (itt == RESERVED_ITT)
return NULL;
if (session->tt->parse_pdu_itt)
session->tt->parse_pdu_itt(conn, itt, &i, NULL);
else
i = get_itt(itt);
if (i >= session->cmds_max)
return NULL;
return session->cmds[i];
}
EXPORT_SYMBOL_GPL(iscsi_itt_to_task);
/**
* __iscsi_complete_pdu - complete pdu
* @conn: iscsi conn
* @hdr: iscsi header
* @data: data buffer
* @datalen: len of data buffer
*
* Completes pdu processing by freeing any resources allocated at
[SCSI] libiscsi: Reduce locking contention in fast path Replace the session lock with two locks, a forward lock and a backwards lock named frwd_lock and back_lock respectively. The forward lock protects resources that change while sending a request to the target, such as cmdsn, queued_cmdsn, and allocating task from the commands' pool with kfifo_out. The backward lock protects resources that change while processing a response or in error path, such as cmdsn_exp, cmdsn_max, and returning tasks to the commands' pool with kfifo_in. Under a steady state fast-path situation, that is when one or more processes/threads submit IO to an iscsi device and a single kernel upcall (e.g softirq) is dealing with processing of responses without errors, this patch eliminates the contention between the queuecommand()/request response/scsi_done() flows associated with iscsi sessions. Between the forward and the backward locks exists a strict locking hierarchy. The mutual exclusion zone protected by the forward lock can enclose the mutual exclusion zone protected by the backward lock but not vice versa. For example, in iscsi_conn_teardown or in iscsi_xmit_data when there is a failure and __iscsi_put_task is called, the backward lock is taken while the forward lock is still taken. On the other hand, if in the RX path a nop is to be sent, for example in iscsi_handle_reject or __iscsi_complete_pdu than the forward lock is released and the backward lock is taken for the duration of iscsi_send_nopout, later the backward lock is released and the forward lock is retaken. libiscsi_tcp uses two kernel fifos the r2t pool and the r2t queue. The insertion and deletion from these queues didn't corespond to the assumption taken by the new forward/backwards session locking paradigm. That is, in iscsi_tcp_clenup_task which belongs to the RX (backwards) path, r2t is taken out from r2t queue and inserted to the r2t pool. In iscsi_tcp_get_curr_r2t which belong to the TX (forward) path, r2t is also inserted to the r2t pool and another r2t is pulled from r2t queue. Only in iscsi_tcp_r2t_rsp which is called in the RX path but can requeue to the TX path, r2t is taken from the r2t pool and inserted to the r2t queue. In order to cope with this situation, two spin locks were added, pool2queue and queue2pool. The former protects extracting from the r2t pool and inserting to the r2t queue, and the later protects the extracing from the r2t queue and inserting to the r2t pool. Signed-off-by: Shlomo Pongratz <shlomop@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> [minor fix up to apply cleanly and compile fix] Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2014-02-07 14:41:38 +08:00
* queuecommand or send generic. session back_lock must be held and verify
* itt must have been called.
*/
int __iscsi_complete_pdu(struct iscsi_conn *conn, struct iscsi_hdr *hdr,
char *data, int datalen)
{
struct iscsi_session *session = conn->session;
int opcode = hdr->opcode & ISCSI_OPCODE_MASK, rc = 0;
struct iscsi_task *task;
uint32_t itt;
conn->last_recv = jiffies;
rc = iscsi_verify_itt(conn, hdr->itt);
if (rc)
return rc;
if (hdr->itt != RESERVED_ITT)
itt = get_itt(hdr->itt);
else
itt = ~0U;
ISCSI_DBG_SESSION(session, "[op 0x%x cid %d itt 0x%x len %d]\n",
opcode, conn->id, itt, datalen);
if (itt == ~0U) {
iscsi_update_cmdsn(session, (struct iscsi_nopin*)hdr);
2006-09-01 06:09:27 +08:00
switch(opcode) {
case ISCSI_OP_NOOP_IN:
if (datalen) {
rc = ISCSI_ERR_PROTO;
break;
}
if (hdr->ttt == cpu_to_be32(ISCSI_RESERVED_TAG))
break;
[SCSI] libiscsi: Reduce locking contention in fast path Replace the session lock with two locks, a forward lock and a backwards lock named frwd_lock and back_lock respectively. The forward lock protects resources that change while sending a request to the target, such as cmdsn, queued_cmdsn, and allocating task from the commands' pool with kfifo_out. The backward lock protects resources that change while processing a response or in error path, such as cmdsn_exp, cmdsn_max, and returning tasks to the commands' pool with kfifo_in. Under a steady state fast-path situation, that is when one or more processes/threads submit IO to an iscsi device and a single kernel upcall (e.g softirq) is dealing with processing of responses without errors, this patch eliminates the contention between the queuecommand()/request response/scsi_done() flows associated with iscsi sessions. Between the forward and the backward locks exists a strict locking hierarchy. The mutual exclusion zone protected by the forward lock can enclose the mutual exclusion zone protected by the backward lock but not vice versa. For example, in iscsi_conn_teardown or in iscsi_xmit_data when there is a failure and __iscsi_put_task is called, the backward lock is taken while the forward lock is still taken. On the other hand, if in the RX path a nop is to be sent, for example in iscsi_handle_reject or __iscsi_complete_pdu than the forward lock is released and the backward lock is taken for the duration of iscsi_send_nopout, later the backward lock is released and the forward lock is retaken. libiscsi_tcp uses two kernel fifos the r2t pool and the r2t queue. The insertion and deletion from these queues didn't corespond to the assumption taken by the new forward/backwards session locking paradigm. That is, in iscsi_tcp_clenup_task which belongs to the RX (backwards) path, r2t is taken out from r2t queue and inserted to the r2t pool. In iscsi_tcp_get_curr_r2t which belong to the TX (forward) path, r2t is also inserted to the r2t pool and another r2t is pulled from r2t queue. Only in iscsi_tcp_r2t_rsp which is called in the RX path but can requeue to the TX path, r2t is taken from the r2t pool and inserted to the r2t queue. In order to cope with this situation, two spin locks were added, pool2queue and queue2pool. The former protects extracting from the r2t pool and inserting to the r2t queue, and the later protects the extracing from the r2t queue and inserting to the r2t pool. Signed-off-by: Shlomo Pongratz <shlomop@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> [minor fix up to apply cleanly and compile fix] Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2014-02-07 14:41:38 +08:00
/* In RX path we are under back lock */
spin_unlock(&session->back_lock);
spin_lock(&session->frwd_lock);
iscsi_send_nopout(conn, (struct iscsi_nopin*)hdr);
[SCSI] libiscsi: Reduce locking contention in fast path Replace the session lock with two locks, a forward lock and a backwards lock named frwd_lock and back_lock respectively. The forward lock protects resources that change while sending a request to the target, such as cmdsn, queued_cmdsn, and allocating task from the commands' pool with kfifo_out. The backward lock protects resources that change while processing a response or in error path, such as cmdsn_exp, cmdsn_max, and returning tasks to the commands' pool with kfifo_in. Under a steady state fast-path situation, that is when one or more processes/threads submit IO to an iscsi device and a single kernel upcall (e.g softirq) is dealing with processing of responses without errors, this patch eliminates the contention between the queuecommand()/request response/scsi_done() flows associated with iscsi sessions. Between the forward and the backward locks exists a strict locking hierarchy. The mutual exclusion zone protected by the forward lock can enclose the mutual exclusion zone protected by the backward lock but not vice versa. For example, in iscsi_conn_teardown or in iscsi_xmit_data when there is a failure and __iscsi_put_task is called, the backward lock is taken while the forward lock is still taken. On the other hand, if in the RX path a nop is to be sent, for example in iscsi_handle_reject or __iscsi_complete_pdu than the forward lock is released and the backward lock is taken for the duration of iscsi_send_nopout, later the backward lock is released and the forward lock is retaken. libiscsi_tcp uses two kernel fifos the r2t pool and the r2t queue. The insertion and deletion from these queues didn't corespond to the assumption taken by the new forward/backwards session locking paradigm. That is, in iscsi_tcp_clenup_task which belongs to the RX (backwards) path, r2t is taken out from r2t queue and inserted to the r2t pool. In iscsi_tcp_get_curr_r2t which belong to the TX (forward) path, r2t is also inserted to the r2t pool and another r2t is pulled from r2t queue. Only in iscsi_tcp_r2t_rsp which is called in the RX path but can requeue to the TX path, r2t is taken from the r2t pool and inserted to the r2t queue. In order to cope with this situation, two spin locks were added, pool2queue and queue2pool. The former protects extracting from the r2t pool and inserting to the r2t queue, and the later protects the extracing from the r2t queue and inserting to the r2t pool. Signed-off-by: Shlomo Pongratz <shlomop@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> [minor fix up to apply cleanly and compile fix] Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2014-02-07 14:41:38 +08:00
spin_unlock(&session->frwd_lock);
spin_lock(&session->back_lock);
break;
case ISCSI_OP_REJECT:
2006-09-01 06:09:27 +08:00
rc = iscsi_handle_reject(conn, hdr, data, datalen);
break;
case ISCSI_OP_ASYNC_EVENT:
conn->exp_statsn = be32_to_cpu(hdr->statsn) + 1;
if (iscsi_recv_pdu(conn->cls_conn, hdr, data, datalen))
rc = ISCSI_ERR_CONN_FAILED;
break;
default:
rc = ISCSI_ERR_BAD_OPCODE;
break;
}
goto out;
}
switch(opcode) {
case ISCSI_OP_SCSI_CMD_RSP:
case ISCSI_OP_SCSI_DATA_IN:
task = iscsi_itt_to_ctask(conn, hdr->itt);
if (!task)
return ISCSI_ERR_BAD_ITT;
task->last_xfer = jiffies;
break;
case ISCSI_OP_R2T:
/*
* LLD handles R2Ts if they need to.
*/
return 0;
case ISCSI_OP_LOGOUT_RSP:
case ISCSI_OP_LOGIN_RSP:
case ISCSI_OP_TEXT_RSP:
case ISCSI_OP_SCSI_TMFUNC_RSP:
case ISCSI_OP_NOOP_IN:
task = iscsi_itt_to_task(conn, hdr->itt);
if (!task)
return ISCSI_ERR_BAD_ITT;
break;
default:
return ISCSI_ERR_BAD_OPCODE;
}
switch(opcode) {
case ISCSI_OP_SCSI_CMD_RSP:
iscsi_scsi_cmd_rsp(conn, hdr, task, data, datalen);
break;
case ISCSI_OP_SCSI_DATA_IN:
iscsi_data_in_rsp(conn, hdr, task);
break;
case ISCSI_OP_LOGOUT_RSP:
iscsi_update_cmdsn(session, (struct iscsi_nopin*)hdr);
if (datalen) {
rc = ISCSI_ERR_PROTO;
break;
}
conn->exp_statsn = be32_to_cpu(hdr->statsn) + 1;
goto recv_pdu;
case ISCSI_OP_LOGIN_RSP:
case ISCSI_OP_TEXT_RSP:
iscsi_update_cmdsn(session, (struct iscsi_nopin*)hdr);
/*
* login related PDU's exp_statsn is handled in
* userspace
*/
goto recv_pdu;
case ISCSI_OP_SCSI_TMFUNC_RSP:
iscsi_update_cmdsn(session, (struct iscsi_nopin*)hdr);
if (datalen) {
rc = ISCSI_ERR_PROTO;
break;
}
iscsi_tmf_rsp(conn, hdr);
iscsi_complete_task(task, ISCSI_TASK_COMPLETED);
break;
case ISCSI_OP_NOOP_IN:
iscsi_update_cmdsn(session, (struct iscsi_nopin*)hdr);
if (hdr->ttt != cpu_to_be32(ISCSI_RESERVED_TAG) || datalen) {
rc = ISCSI_ERR_PROTO;
break;
}
conn->exp_statsn = be32_to_cpu(hdr->statsn) + 1;
rc = iscsi_nop_out_rsp(task, (struct iscsi_nopin*)hdr,
data, datalen);
break;
default:
rc = ISCSI_ERR_BAD_OPCODE;
break;
}
out:
return rc;
recv_pdu:
if (iscsi_recv_pdu(conn->cls_conn, hdr, data, datalen))
rc = ISCSI_ERR_CONN_FAILED;
iscsi_complete_task(task, ISCSI_TASK_COMPLETED);
return rc;
}
EXPORT_SYMBOL_GPL(__iscsi_complete_pdu);
int iscsi_complete_pdu(struct iscsi_conn *conn, struct iscsi_hdr *hdr,
char *data, int datalen)
{
int rc;
[SCSI] libiscsi: Reduce locking contention in fast path Replace the session lock with two locks, a forward lock and a backwards lock named frwd_lock and back_lock respectively. The forward lock protects resources that change while sending a request to the target, such as cmdsn, queued_cmdsn, and allocating task from the commands' pool with kfifo_out. The backward lock protects resources that change while processing a response or in error path, such as cmdsn_exp, cmdsn_max, and returning tasks to the commands' pool with kfifo_in. Under a steady state fast-path situation, that is when one or more processes/threads submit IO to an iscsi device and a single kernel upcall (e.g softirq) is dealing with processing of responses without errors, this patch eliminates the contention between the queuecommand()/request response/scsi_done() flows associated with iscsi sessions. Between the forward and the backward locks exists a strict locking hierarchy. The mutual exclusion zone protected by the forward lock can enclose the mutual exclusion zone protected by the backward lock but not vice versa. For example, in iscsi_conn_teardown or in iscsi_xmit_data when there is a failure and __iscsi_put_task is called, the backward lock is taken while the forward lock is still taken. On the other hand, if in the RX path a nop is to be sent, for example in iscsi_handle_reject or __iscsi_complete_pdu than the forward lock is released and the backward lock is taken for the duration of iscsi_send_nopout, later the backward lock is released and the forward lock is retaken. libiscsi_tcp uses two kernel fifos the r2t pool and the r2t queue. The insertion and deletion from these queues didn't corespond to the assumption taken by the new forward/backwards session locking paradigm. That is, in iscsi_tcp_clenup_task which belongs to the RX (backwards) path, r2t is taken out from r2t queue and inserted to the r2t pool. In iscsi_tcp_get_curr_r2t which belong to the TX (forward) path, r2t is also inserted to the r2t pool and another r2t is pulled from r2t queue. Only in iscsi_tcp_r2t_rsp which is called in the RX path but can requeue to the TX path, r2t is taken from the r2t pool and inserted to the r2t queue. In order to cope with this situation, two spin locks were added, pool2queue and queue2pool. The former protects extracting from the r2t pool and inserting to the r2t queue, and the later protects the extracing from the r2t queue and inserting to the r2t pool. Signed-off-by: Shlomo Pongratz <shlomop@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> [minor fix up to apply cleanly and compile fix] Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2014-02-07 14:41:38 +08:00
spin_lock(&conn->session->back_lock);
rc = __iscsi_complete_pdu(conn, hdr, data, datalen);
[SCSI] libiscsi: Reduce locking contention in fast path Replace the session lock with two locks, a forward lock and a backwards lock named frwd_lock and back_lock respectively. The forward lock protects resources that change while sending a request to the target, such as cmdsn, queued_cmdsn, and allocating task from the commands' pool with kfifo_out. The backward lock protects resources that change while processing a response or in error path, such as cmdsn_exp, cmdsn_max, and returning tasks to the commands' pool with kfifo_in. Under a steady state fast-path situation, that is when one or more processes/threads submit IO to an iscsi device and a single kernel upcall (e.g softirq) is dealing with processing of responses without errors, this patch eliminates the contention between the queuecommand()/request response/scsi_done() flows associated with iscsi sessions. Between the forward and the backward locks exists a strict locking hierarchy. The mutual exclusion zone protected by the forward lock can enclose the mutual exclusion zone protected by the backward lock but not vice versa. For example, in iscsi_conn_teardown or in iscsi_xmit_data when there is a failure and __iscsi_put_task is called, the backward lock is taken while the forward lock is still taken. On the other hand, if in the RX path a nop is to be sent, for example in iscsi_handle_reject or __iscsi_complete_pdu than the forward lock is released and the backward lock is taken for the duration of iscsi_send_nopout, later the backward lock is released and the forward lock is retaken. libiscsi_tcp uses two kernel fifos the r2t pool and the r2t queue. The insertion and deletion from these queues didn't corespond to the assumption taken by the new forward/backwards session locking paradigm. That is, in iscsi_tcp_clenup_task which belongs to the RX (backwards) path, r2t is taken out from r2t queue and inserted to the r2t pool. In iscsi_tcp_get_curr_r2t which belong to the TX (forward) path, r2t is also inserted to the r2t pool and another r2t is pulled from r2t queue. Only in iscsi_tcp_r2t_rsp which is called in the RX path but can requeue to the TX path, r2t is taken from the r2t pool and inserted to the r2t queue. In order to cope with this situation, two spin locks were added, pool2queue and queue2pool. The former protects extracting from the r2t pool and inserting to the r2t queue, and the later protects the extracing from the r2t queue and inserting to the r2t pool. Signed-off-by: Shlomo Pongratz <shlomop@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> [minor fix up to apply cleanly and compile fix] Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2014-02-07 14:41:38 +08:00
spin_unlock(&conn->session->back_lock);
return rc;
}
EXPORT_SYMBOL_GPL(iscsi_complete_pdu);
int iscsi_verify_itt(struct iscsi_conn *conn, itt_t itt)
{
struct iscsi_session *session = conn->session;
int age = 0, i = 0;
if (itt == RESERVED_ITT)
return 0;
if (session->tt->parse_pdu_itt)
session->tt->parse_pdu_itt(conn, itt, &i, &age);
else {
i = get_itt(itt);
age = ((__force u32)itt >> ISCSI_AGE_SHIFT) & ISCSI_AGE_MASK;
}
if (age != session->age) {
iscsi_conn_printk(KERN_ERR, conn,
"received itt %x expected session age (%x)\n",
(__force u32)itt, session->age);
return ISCSI_ERR_BAD_ITT;
}
if (i >= session->cmds_max) {
iscsi_conn_printk(KERN_ERR, conn,
"received invalid itt index %u (max cmds "
"%u.\n", i, session->cmds_max);
return ISCSI_ERR_BAD_ITT;
}
return 0;
}
EXPORT_SYMBOL_GPL(iscsi_verify_itt);
/**
* iscsi_itt_to_ctask - look up ctask by itt
* @conn: iscsi connection
* @itt: itt
*
* This should be used for cmd tasks.
*
[SCSI] libiscsi: Reduce locking contention in fast path Replace the session lock with two locks, a forward lock and a backwards lock named frwd_lock and back_lock respectively. The forward lock protects resources that change while sending a request to the target, such as cmdsn, queued_cmdsn, and allocating task from the commands' pool with kfifo_out. The backward lock protects resources that change while processing a response or in error path, such as cmdsn_exp, cmdsn_max, and returning tasks to the commands' pool with kfifo_in. Under a steady state fast-path situation, that is when one or more processes/threads submit IO to an iscsi device and a single kernel upcall (e.g softirq) is dealing with processing of responses without errors, this patch eliminates the contention between the queuecommand()/request response/scsi_done() flows associated with iscsi sessions. Between the forward and the backward locks exists a strict locking hierarchy. The mutual exclusion zone protected by the forward lock can enclose the mutual exclusion zone protected by the backward lock but not vice versa. For example, in iscsi_conn_teardown or in iscsi_xmit_data when there is a failure and __iscsi_put_task is called, the backward lock is taken while the forward lock is still taken. On the other hand, if in the RX path a nop is to be sent, for example in iscsi_handle_reject or __iscsi_complete_pdu than the forward lock is released and the backward lock is taken for the duration of iscsi_send_nopout, later the backward lock is released and the forward lock is retaken. libiscsi_tcp uses two kernel fifos the r2t pool and the r2t queue. The insertion and deletion from these queues didn't corespond to the assumption taken by the new forward/backwards session locking paradigm. That is, in iscsi_tcp_clenup_task which belongs to the RX (backwards) path, r2t is taken out from r2t queue and inserted to the r2t pool. In iscsi_tcp_get_curr_r2t which belong to the TX (forward) path, r2t is also inserted to the r2t pool and another r2t is pulled from r2t queue. Only in iscsi_tcp_r2t_rsp which is called in the RX path but can requeue to the TX path, r2t is taken from the r2t pool and inserted to the r2t queue. In order to cope with this situation, two spin locks were added, pool2queue and queue2pool. The former protects extracting from the r2t pool and inserting to the r2t queue, and the later protects the extracing from the r2t queue and inserting to the r2t pool. Signed-off-by: Shlomo Pongratz <shlomop@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> [minor fix up to apply cleanly and compile fix] Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2014-02-07 14:41:38 +08:00
* The session back_lock must be held.
*/
struct iscsi_task *iscsi_itt_to_ctask(struct iscsi_conn *conn, itt_t itt)
{
struct iscsi_task *task;
if (iscsi_verify_itt(conn, itt))
return NULL;
task = iscsi_itt_to_task(conn, itt);
if (!task || !task->sc)
return NULL;
if (iscsi_cmd(task->sc)->age != conn->session->age) {
iscsi_session_printk(KERN_ERR, conn->session,
"task's session age %d, expected %d\n",
iscsi_cmd(task->sc)->age, conn->session->age);
return NULL;
}
return task;
}
EXPORT_SYMBOL_GPL(iscsi_itt_to_ctask);
void iscsi_session_failure(struct iscsi_session *session,
enum iscsi_err err)
{
struct iscsi_conn *conn;
[SCSI] libiscsi: Reduce locking contention in fast path Replace the session lock with two locks, a forward lock and a backwards lock named frwd_lock and back_lock respectively. The forward lock protects resources that change while sending a request to the target, such as cmdsn, queued_cmdsn, and allocating task from the commands' pool with kfifo_out. The backward lock protects resources that change while processing a response or in error path, such as cmdsn_exp, cmdsn_max, and returning tasks to the commands' pool with kfifo_in. Under a steady state fast-path situation, that is when one or more processes/threads submit IO to an iscsi device and a single kernel upcall (e.g softirq) is dealing with processing of responses without errors, this patch eliminates the contention between the queuecommand()/request response/scsi_done() flows associated with iscsi sessions. Between the forward and the backward locks exists a strict locking hierarchy. The mutual exclusion zone protected by the forward lock can enclose the mutual exclusion zone protected by the backward lock but not vice versa. For example, in iscsi_conn_teardown or in iscsi_xmit_data when there is a failure and __iscsi_put_task is called, the backward lock is taken while the forward lock is still taken. On the other hand, if in the RX path a nop is to be sent, for example in iscsi_handle_reject or __iscsi_complete_pdu than the forward lock is released and the backward lock is taken for the duration of iscsi_send_nopout, later the backward lock is released and the forward lock is retaken. libiscsi_tcp uses two kernel fifos the r2t pool and the r2t queue. The insertion and deletion from these queues didn't corespond to the assumption taken by the new forward/backwards session locking paradigm. That is, in iscsi_tcp_clenup_task which belongs to the RX (backwards) path, r2t is taken out from r2t queue and inserted to the r2t pool. In iscsi_tcp_get_curr_r2t which belong to the TX (forward) path, r2t is also inserted to the r2t pool and another r2t is pulled from r2t queue. Only in iscsi_tcp_r2t_rsp which is called in the RX path but can requeue to the TX path, r2t is taken from the r2t pool and inserted to the r2t queue. In order to cope with this situation, two spin locks were added, pool2queue and queue2pool. The former protects extracting from the r2t pool and inserting to the r2t queue, and the later protects the extracing from the r2t queue and inserting to the r2t pool. Signed-off-by: Shlomo Pongratz <shlomop@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> [minor fix up to apply cleanly and compile fix] Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2014-02-07 14:41:38 +08:00
spin_lock_bh(&session->frwd_lock);
conn = session->leadconn;
if (session->state == ISCSI_STATE_TERMINATE || !conn) {
[SCSI] libiscsi: Reduce locking contention in fast path Replace the session lock with two locks, a forward lock and a backwards lock named frwd_lock and back_lock respectively. The forward lock protects resources that change while sending a request to the target, such as cmdsn, queued_cmdsn, and allocating task from the commands' pool with kfifo_out. The backward lock protects resources that change while processing a response or in error path, such as cmdsn_exp, cmdsn_max, and returning tasks to the commands' pool with kfifo_in. Under a steady state fast-path situation, that is when one or more processes/threads submit IO to an iscsi device and a single kernel upcall (e.g softirq) is dealing with processing of responses without errors, this patch eliminates the contention between the queuecommand()/request response/scsi_done() flows associated with iscsi sessions. Between the forward and the backward locks exists a strict locking hierarchy. The mutual exclusion zone protected by the forward lock can enclose the mutual exclusion zone protected by the backward lock but not vice versa. For example, in iscsi_conn_teardown or in iscsi_xmit_data when there is a failure and __iscsi_put_task is called, the backward lock is taken while the forward lock is still taken. On the other hand, if in the RX path a nop is to be sent, for example in iscsi_handle_reject or __iscsi_complete_pdu than the forward lock is released and the backward lock is taken for the duration of iscsi_send_nopout, later the backward lock is released and the forward lock is retaken. libiscsi_tcp uses two kernel fifos the r2t pool and the r2t queue. The insertion and deletion from these queues didn't corespond to the assumption taken by the new forward/backwards session locking paradigm. That is, in iscsi_tcp_clenup_task which belongs to the RX (backwards) path, r2t is taken out from r2t queue and inserted to the r2t pool. In iscsi_tcp_get_curr_r2t which belong to the TX (forward) path, r2t is also inserted to the r2t pool and another r2t is pulled from r2t queue. Only in iscsi_tcp_r2t_rsp which is called in the RX path but can requeue to the TX path, r2t is taken from the r2t pool and inserted to the r2t queue. In order to cope with this situation, two spin locks were added, pool2queue and queue2pool. The former protects extracting from the r2t pool and inserting to the r2t queue, and the later protects the extracing from the r2t queue and inserting to the r2t pool. Signed-off-by: Shlomo Pongratz <shlomop@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> [minor fix up to apply cleanly and compile fix] Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2014-02-07 14:41:38 +08:00
spin_unlock_bh(&session->frwd_lock);
return;
}
iscsi_get_conn(conn->cls_conn);
[SCSI] libiscsi: Reduce locking contention in fast path Replace the session lock with two locks, a forward lock and a backwards lock named frwd_lock and back_lock respectively. The forward lock protects resources that change while sending a request to the target, such as cmdsn, queued_cmdsn, and allocating task from the commands' pool with kfifo_out. The backward lock protects resources that change while processing a response or in error path, such as cmdsn_exp, cmdsn_max, and returning tasks to the commands' pool with kfifo_in. Under a steady state fast-path situation, that is when one or more processes/threads submit IO to an iscsi device and a single kernel upcall (e.g softirq) is dealing with processing of responses without errors, this patch eliminates the contention between the queuecommand()/request response/scsi_done() flows associated with iscsi sessions. Between the forward and the backward locks exists a strict locking hierarchy. The mutual exclusion zone protected by the forward lock can enclose the mutual exclusion zone protected by the backward lock but not vice versa. For example, in iscsi_conn_teardown or in iscsi_xmit_data when there is a failure and __iscsi_put_task is called, the backward lock is taken while the forward lock is still taken. On the other hand, if in the RX path a nop is to be sent, for example in iscsi_handle_reject or __iscsi_complete_pdu than the forward lock is released and the backward lock is taken for the duration of iscsi_send_nopout, later the backward lock is released and the forward lock is retaken. libiscsi_tcp uses two kernel fifos the r2t pool and the r2t queue. The insertion and deletion from these queues didn't corespond to the assumption taken by the new forward/backwards session locking paradigm. That is, in iscsi_tcp_clenup_task which belongs to the RX (backwards) path, r2t is taken out from r2t queue and inserted to the r2t pool. In iscsi_tcp_get_curr_r2t which belong to the TX (forward) path, r2t is also inserted to the r2t pool and another r2t is pulled from r2t queue. Only in iscsi_tcp_r2t_rsp which is called in the RX path but can requeue to the TX path, r2t is taken from the r2t pool and inserted to the r2t queue. In order to cope with this situation, two spin locks were added, pool2queue and queue2pool. The former protects extracting from the r2t pool and inserting to the r2t queue, and the later protects the extracing from the r2t queue and inserting to the r2t pool. Signed-off-by: Shlomo Pongratz <shlomop@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> [minor fix up to apply cleanly and compile fix] Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2014-02-07 14:41:38 +08:00
spin_unlock_bh(&session->frwd_lock);
/*
* if the host is being removed bypass the connection
* recovery initialization because we are going to kill
* the session.
*/
if (err == ISCSI_ERR_INVALID_HOST)
iscsi_conn_error_event(conn->cls_conn, err);
else
iscsi_conn_failure(conn, err);
iscsi_put_conn(conn->cls_conn);
}
EXPORT_SYMBOL_GPL(iscsi_session_failure);
static bool iscsi_set_conn_failed(struct iscsi_conn *conn)
{
struct iscsi_session *session = conn->session;
if (session->state == ISCSI_STATE_FAILED)
return false;
if (conn->stop_stage == 0)
session->state = ISCSI_STATE_FAILED;
set_bit(ISCSI_CONN_FLAG_SUSPEND_TX, &conn->flags);
set_bit(ISCSI_CONN_FLAG_SUSPEND_RX, &conn->flags);
return true;
}
void iscsi_conn_failure(struct iscsi_conn *conn, enum iscsi_err err)
{
struct iscsi_session *session = conn->session;
bool needs_evt;
spin_lock_bh(&session->frwd_lock);
needs_evt = iscsi_set_conn_failed(conn);
spin_unlock_bh(&session->frwd_lock);
if (needs_evt)
iscsi_conn_error_event(conn->cls_conn, err);
}
EXPORT_SYMBOL_GPL(iscsi_conn_failure);
static int iscsi_check_cmdsn_window_closed(struct iscsi_conn *conn)
{
struct iscsi_session *session = conn->session;
/*
* Check for iSCSI window and take care of CmdSN wrap-around
*/
if (!iscsi_sna_lte(session->queued_cmdsn, session->max_cmdsn)) {
ISCSI_DBG_SESSION(session, "iSCSI CmdSN closed. ExpCmdSn "
"%u MaxCmdSN %u CmdSN %u/%u\n",
session->exp_cmdsn, session->max_cmdsn,
session->cmdsn, session->queued_cmdsn);
return -ENOSPC;
}
return 0;
}
static int iscsi_xmit_task(struct iscsi_conn *conn, struct iscsi_task *task,
bool was_requeue)
{
int rc;
if (!conn->task) {
scsi: iscsi: Remove iscsi_get_task back_lock requirement We currently require that the back_lock is held when calling the functions that manipulate the iscsi_task refcount. The only reason for this is to handle races where we are handling SCSI-ml EH callbacks and the cmd is completing at the same time the normal completion path is running, and we can't return from the EH callback until the driver has stopped accessing the cmd. Holding the back_lock while also accessing the task->state made it simple to check that a cmd is completing and also get/put a refcount at the same time, and at the time we were not as concerned about performance. The problem is that we don't want to take the back_lock from the xmit path for normal I/O since it causes contention with the completion path if the user has chosen to try and split those paths on different CPUs (in this case abusing the CPUs and ignoring caching improves perf for some uses). Begins to remove the back_lock requirement for iscsi_get/put_task by removing the requirement for the get path. Instead of always holding the back_lock we detect if something has done the last put and is about to call iscsi_free_task(). A subsequent commit will then allow iSCSI code to do the last put on a task and only grab the back_lock if the refcount is now zero and it's going to call iscsi_free_task(). Link: https://lore.kernel.org/r/20220616224557.115234-8-michael.christie@oracle.com Reviewed-by: Lee Duncan <lduncan@suse.com> Signed-off-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-06-17 06:45:55 +08:00
/*
* Take a ref so we can access it after xmit_task().
*
* This should never fail because the failure paths will have
* stopped the xmit thread.
*/
if (!iscsi_get_task(task)) {
WARN_ON_ONCE(1);
return 0;
}
} else {
/* Already have a ref from when we failed to send it last call */
conn->task = NULL;
}
/*
* If this was a requeue for a R2T we have an extra ref on the task in
* case a bad target sends a cmd rsp before we have handled the task.
*/
if (was_requeue)
iscsi_put_task(task);
/*
* Do this after dropping the extra ref because if this was a requeue
* it's removed from that list and cleanup_queued_task would miss it.
*/
if (test_bit(ISCSI_CONN_FLAG_SUSPEND_TX, &conn->flags)) {
/*
* Save the task and ref in case we weren't cleaning up this
* task and get woken up again.
*/
conn->task = task;
scsi: libiscsi: Fix race between iscsi_xmit_task and iscsi_complete_task When a target sends Check Condition, whilst initiator is busy xmiting re-queued data, could lead to race between iscsi_complete_task() and iscsi_xmit_task() and eventually crashing with the following kernel backtrace. [3326150.987523] ALERT: BUG: unable to handle kernel NULL pointer dereference at 0000000000000078 [3326150.987549] ALERT: IP: [<ffffffffa05ce70d>] iscsi_xmit_task+0x2d/0xc0 [libiscsi] [3326150.987571] WARN: PGD 569c8067 PUD 569c9067 PMD 0 [3326150.987582] WARN: Oops: 0002 [#1] SMP [3326150.987593] WARN: Modules linked in: tun nfsv3 nfs fscache dm_round_robin [3326150.987762] WARN: CPU: 2 PID: 8399 Comm: kworker/u32:1 Tainted: G O 4.4.0+2 #1 [3326150.987774] WARN: Hardware name: Dell Inc. PowerEdge R720/0W7JN5, BIOS 2.5.4 01/22/2016 [3326150.987790] WARN: Workqueue: iscsi_q_13 iscsi_xmitworker [libiscsi] [3326150.987799] WARN: task: ffff8801d50f3800 ti: ffff8801f5458000 task.ti: ffff8801f5458000 [3326150.987810] WARN: RIP: e030:[<ffffffffa05ce70d>] [<ffffffffa05ce70d>] iscsi_xmit_task+0x2d/0xc0 [libiscsi] [3326150.987825] WARN: RSP: e02b:ffff8801f545bdb0 EFLAGS: 00010246 [3326150.987831] WARN: RAX: 00000000ffffffc3 RBX: ffff880282d2ab20 RCX: ffff88026b6ac480 [3326150.987842] WARN: RDX: 0000000000000000 RSI: 00000000fffffe01 RDI: ffff880282d2ab20 [3326150.987852] WARN: RBP: ffff8801f545bdc8 R08: 0000000000000000 R09: 0000000000000008 [3326150.987862] WARN: R10: 0000000000000000 R11: 000000000000fe88 R12: 0000000000000000 [3326150.987872] WARN: R13: ffff880282d2abe8 R14: ffff880282d2abd8 R15: ffff880282d2ac08 [3326150.987890] WARN: FS: 00007f5a866b4840(0000) GS:ffff88028a640000(0000) knlGS:0000000000000000 [3326150.987900] WARN: CS: e033 DS: 0000 ES: 0000 CR0: 0000000080050033 [3326150.987907] WARN: CR2: 0000000000000078 CR3: 0000000070244000 CR4: 0000000000042660 [3326150.987918] WARN: Stack: [3326150.987924] WARN: ffff880282d2ad58 ffff880282d2ab20 ffff880282d2abe8 ffff8801f545be18 [3326150.987938] WARN: ffffffffa05cea90 ffff880282d2abf8 ffff88026b59cc80 ffff88026b59cc00 [3326150.987951] WARN: ffff88022acf32c0 ffff880289491800 ffff880255a80800 0000000000000400 [3326150.987964] WARN: Call Trace: [3326150.987975] WARN: [<ffffffffa05cea90>] iscsi_xmitworker+0x2f0/0x360 [libiscsi] [3326150.987988] WARN: [<ffffffff8108862c>] process_one_work+0x1fc/0x3b0 [3326150.987997] WARN: [<ffffffff81088f95>] worker_thread+0x2a5/0x470 [3326150.988006] WARN: [<ffffffff8159cad8>] ? __schedule+0x648/0x870 [3326150.988015] WARN: [<ffffffff81088cf0>] ? rescuer_thread+0x300/0x300 [3326150.988023] WARN: [<ffffffff8108ddf5>] kthread+0xd5/0xe0 [3326150.988031] WARN: [<ffffffff8108dd20>] ? kthread_stop+0x110/0x110 [3326150.988040] WARN: [<ffffffff815a0bcf>] ret_from_fork+0x3f/0x70 [3326150.988048] WARN: [<ffffffff8108dd20>] ? kthread_stop+0x110/0x110 [3326150.988127] ALERT: RIP [<ffffffffa05ce70d>] iscsi_xmit_task+0x2d/0xc0 [libiscsi] [3326150.988138] WARN: RSP <ffff8801f545bdb0> [3326150.988144] WARN: CR2: 0000000000000078 [3326151.020366] WARN: ---[ end trace 1c60974d4678d81b ]--- Commit 6f8830f5bbab ("scsi: libiscsi: add lock around task lists to fix list corruption regression") introduced "taskqueuelock" to fix list corruption during the race, but this wasn't enough. Re-setting of conn->task to NULL, could race with iscsi_xmit_task(). iscsi_complete_task() { .... if (conn->task == task) conn->task = NULL; } conn->task in iscsi_xmit_task() could be NULL and so will be task. __iscsi_get_task(task) will crash (NullPtr de-ref), trying to access refcount. iscsi_xmit_task() { struct iscsi_task *task = conn->task; __iscsi_get_task(task); } This commit will take extra conn->session->back_lock in iscsi_xmit_task() to ensure iscsi_xmit_task() waits for iscsi_complete_task(), if iscsi_complete_task() wins the race. If iscsi_xmit_task() wins the race, iscsi_xmit_task() increments task->refcount (__iscsi_get_task) ensuring iscsi_complete_task() will not iscsi_free_task(). Signed-off-by: Anoob Soman <anoob.soman@citrix.com> Signed-off-by: Bob Liu <bob.liu@oracle.com> Acked-by: Lee Duncan <lduncan@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-02-13 13:21:39 +08:00
return -ENODATA;
}
[SCSI] libiscsi: Reduce locking contention in fast path Replace the session lock with two locks, a forward lock and a backwards lock named frwd_lock and back_lock respectively. The forward lock protects resources that change while sending a request to the target, such as cmdsn, queued_cmdsn, and allocating task from the commands' pool with kfifo_out. The backward lock protects resources that change while processing a response or in error path, such as cmdsn_exp, cmdsn_max, and returning tasks to the commands' pool with kfifo_in. Under a steady state fast-path situation, that is when one or more processes/threads submit IO to an iscsi device and a single kernel upcall (e.g softirq) is dealing with processing of responses without errors, this patch eliminates the contention between the queuecommand()/request response/scsi_done() flows associated with iscsi sessions. Between the forward and the backward locks exists a strict locking hierarchy. The mutual exclusion zone protected by the forward lock can enclose the mutual exclusion zone protected by the backward lock but not vice versa. For example, in iscsi_conn_teardown or in iscsi_xmit_data when there is a failure and __iscsi_put_task is called, the backward lock is taken while the forward lock is still taken. On the other hand, if in the RX path a nop is to be sent, for example in iscsi_handle_reject or __iscsi_complete_pdu than the forward lock is released and the backward lock is taken for the duration of iscsi_send_nopout, later the backward lock is released and the forward lock is retaken. libiscsi_tcp uses two kernel fifos the r2t pool and the r2t queue. The insertion and deletion from these queues didn't corespond to the assumption taken by the new forward/backwards session locking paradigm. That is, in iscsi_tcp_clenup_task which belongs to the RX (backwards) path, r2t is taken out from r2t queue and inserted to the r2t pool. In iscsi_tcp_get_curr_r2t which belong to the TX (forward) path, r2t is also inserted to the r2t pool and another r2t is pulled from r2t queue. Only in iscsi_tcp_r2t_rsp which is called in the RX path but can requeue to the TX path, r2t is taken from the r2t pool and inserted to the r2t queue. In order to cope with this situation, two spin locks were added, pool2queue and queue2pool. The former protects extracting from the r2t pool and inserting to the r2t queue, and the later protects the extracing from the r2t queue and inserting to the r2t pool. Signed-off-by: Shlomo Pongratz <shlomop@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> [minor fix up to apply cleanly and compile fix] Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2014-02-07 14:41:38 +08:00
spin_unlock_bh(&conn->session->frwd_lock);
rc = conn->session->tt->xmit_task(task);
[SCSI] libiscsi: Reduce locking contention in fast path Replace the session lock with two locks, a forward lock and a backwards lock named frwd_lock and back_lock respectively. The forward lock protects resources that change while sending a request to the target, such as cmdsn, queued_cmdsn, and allocating task from the commands' pool with kfifo_out. The backward lock protects resources that change while processing a response or in error path, such as cmdsn_exp, cmdsn_max, and returning tasks to the commands' pool with kfifo_in. Under a steady state fast-path situation, that is when one or more processes/threads submit IO to an iscsi device and a single kernel upcall (e.g softirq) is dealing with processing of responses without errors, this patch eliminates the contention between the queuecommand()/request response/scsi_done() flows associated with iscsi sessions. Between the forward and the backward locks exists a strict locking hierarchy. The mutual exclusion zone protected by the forward lock can enclose the mutual exclusion zone protected by the backward lock but not vice versa. For example, in iscsi_conn_teardown or in iscsi_xmit_data when there is a failure and __iscsi_put_task is called, the backward lock is taken while the forward lock is still taken. On the other hand, if in the RX path a nop is to be sent, for example in iscsi_handle_reject or __iscsi_complete_pdu than the forward lock is released and the backward lock is taken for the duration of iscsi_send_nopout, later the backward lock is released and the forward lock is retaken. libiscsi_tcp uses two kernel fifos the r2t pool and the r2t queue. The insertion and deletion from these queues didn't corespond to the assumption taken by the new forward/backwards session locking paradigm. That is, in iscsi_tcp_clenup_task which belongs to the RX (backwards) path, r2t is taken out from r2t queue and inserted to the r2t pool. In iscsi_tcp_get_curr_r2t which belong to the TX (forward) path, r2t is also inserted to the r2t pool and another r2t is pulled from r2t queue. Only in iscsi_tcp_r2t_rsp which is called in the RX path but can requeue to the TX path, r2t is taken from the r2t pool and inserted to the r2t queue. In order to cope with this situation, two spin locks were added, pool2queue and queue2pool. The former protects extracting from the r2t pool and inserting to the r2t queue, and the later protects the extracing from the r2t queue and inserting to the r2t pool. Signed-off-by: Shlomo Pongratz <shlomop@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> [minor fix up to apply cleanly and compile fix] Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2014-02-07 14:41:38 +08:00
spin_lock_bh(&conn->session->frwd_lock);
if (!rc) {
/* done with this task */
task->last_xfer = jiffies;
} else {
/*
* get an extra ref that is released next time we access it
* as conn->task above.
*/
scsi: iscsi: Remove iscsi_get_task back_lock requirement We currently require that the back_lock is held when calling the functions that manipulate the iscsi_task refcount. The only reason for this is to handle races where we are handling SCSI-ml EH callbacks and the cmd is completing at the same time the normal completion path is running, and we can't return from the EH callback until the driver has stopped accessing the cmd. Holding the back_lock while also accessing the task->state made it simple to check that a cmd is completing and also get/put a refcount at the same time, and at the time we were not as concerned about performance. The problem is that we don't want to take the back_lock from the xmit path for normal I/O since it causes contention with the completion path if the user has chosen to try and split those paths on different CPUs (in this case abusing the CPUs and ignoring caching improves perf for some uses). Begins to remove the back_lock requirement for iscsi_get/put_task by removing the requirement for the get path. Instead of always holding the back_lock we detect if something has done the last put and is about to call iscsi_free_task(). A subsequent commit will then allow iSCSI code to do the last put on a task and only grab the back_lock if the refcount is now zero and it's going to call iscsi_free_task(). Link: https://lore.kernel.org/r/20220616224557.115234-8-michael.christie@oracle.com Reviewed-by: Lee Duncan <lduncan@suse.com> Signed-off-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-06-17 06:45:55 +08:00
iscsi_get_task(task);
conn->task = task;
}
iscsi_put_task(task);
return rc;
}
/**
* iscsi_requeue_task - requeue task to run from session workqueue
* @task: task to requeue
*
* Callers must have taken a ref to the task that is going to be requeued.
*/
void iscsi_requeue_task(struct iscsi_task *task)
{
struct iscsi_conn *conn = task->conn;
/*
* this may be on the requeue list already if the xmit_task callout
* is handling the r2ts while we are adding new ones
*/
spin_lock_bh(&conn->session->frwd_lock);
if (list_empty(&task->running)) {
list_add_tail(&task->running, &conn->requeue);
} else {
/*
* Don't need the extra ref since it's already requeued and
* has a ref.
*/
iscsi_put_task(task);
}
iscsi_conn_queue_xmit(conn);
spin_unlock_bh(&conn->session->frwd_lock);
}
EXPORT_SYMBOL_GPL(iscsi_requeue_task);
/**
* iscsi_data_xmit - xmit any command into the scheduled connection
* @conn: iscsi connection
*
* Notes:
* The function can return -EAGAIN in which case the caller must
* re-schedule it again later or recover. '0' return code means
* successful xmit.
**/
static int iscsi_data_xmit(struct iscsi_conn *conn)
{
struct iscsi_task *task;
int rc = 0;
[SCSI] libiscsi: Reduce locking contention in fast path Replace the session lock with two locks, a forward lock and a backwards lock named frwd_lock and back_lock respectively. The forward lock protects resources that change while sending a request to the target, such as cmdsn, queued_cmdsn, and allocating task from the commands' pool with kfifo_out. The backward lock protects resources that change while processing a response or in error path, such as cmdsn_exp, cmdsn_max, and returning tasks to the commands' pool with kfifo_in. Under a steady state fast-path situation, that is when one or more processes/threads submit IO to an iscsi device and a single kernel upcall (e.g softirq) is dealing with processing of responses without errors, this patch eliminates the contention between the queuecommand()/request response/scsi_done() flows associated with iscsi sessions. Between the forward and the backward locks exists a strict locking hierarchy. The mutual exclusion zone protected by the forward lock can enclose the mutual exclusion zone protected by the backward lock but not vice versa. For example, in iscsi_conn_teardown or in iscsi_xmit_data when there is a failure and __iscsi_put_task is called, the backward lock is taken while the forward lock is still taken. On the other hand, if in the RX path a nop is to be sent, for example in iscsi_handle_reject or __iscsi_complete_pdu than the forward lock is released and the backward lock is taken for the duration of iscsi_send_nopout, later the backward lock is released and the forward lock is retaken. libiscsi_tcp uses two kernel fifos the r2t pool and the r2t queue. The insertion and deletion from these queues didn't corespond to the assumption taken by the new forward/backwards session locking paradigm. That is, in iscsi_tcp_clenup_task which belongs to the RX (backwards) path, r2t is taken out from r2t queue and inserted to the r2t pool. In iscsi_tcp_get_curr_r2t which belong to the TX (forward) path, r2t is also inserted to the r2t pool and another r2t is pulled from r2t queue. Only in iscsi_tcp_r2t_rsp which is called in the RX path but can requeue to the TX path, r2t is taken from the r2t pool and inserted to the r2t queue. In order to cope with this situation, two spin locks were added, pool2queue and queue2pool. The former protects extracting from the r2t pool and inserting to the r2t queue, and the later protects the extracing from the r2t queue and inserting to the r2t pool. Signed-off-by: Shlomo Pongratz <shlomop@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> [minor fix up to apply cleanly and compile fix] Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2014-02-07 14:41:38 +08:00
spin_lock_bh(&conn->session->frwd_lock);
if (test_bit(ISCSI_CONN_FLAG_SUSPEND_TX, &conn->flags)) {
ISCSI_DBG_SESSION(conn->session, "Tx suspended!\n");
[SCSI] libiscsi: Reduce locking contention in fast path Replace the session lock with two locks, a forward lock and a backwards lock named frwd_lock and back_lock respectively. The forward lock protects resources that change while sending a request to the target, such as cmdsn, queued_cmdsn, and allocating task from the commands' pool with kfifo_out. The backward lock protects resources that change while processing a response or in error path, such as cmdsn_exp, cmdsn_max, and returning tasks to the commands' pool with kfifo_in. Under a steady state fast-path situation, that is when one or more processes/threads submit IO to an iscsi device and a single kernel upcall (e.g softirq) is dealing with processing of responses without errors, this patch eliminates the contention between the queuecommand()/request response/scsi_done() flows associated with iscsi sessions. Between the forward and the backward locks exists a strict locking hierarchy. The mutual exclusion zone protected by the forward lock can enclose the mutual exclusion zone protected by the backward lock but not vice versa. For example, in iscsi_conn_teardown or in iscsi_xmit_data when there is a failure and __iscsi_put_task is called, the backward lock is taken while the forward lock is still taken. On the other hand, if in the RX path a nop is to be sent, for example in iscsi_handle_reject or __iscsi_complete_pdu than the forward lock is released and the backward lock is taken for the duration of iscsi_send_nopout, later the backward lock is released and the forward lock is retaken. libiscsi_tcp uses two kernel fifos the r2t pool and the r2t queue. The insertion and deletion from these queues didn't corespond to the assumption taken by the new forward/backwards session locking paradigm. That is, in iscsi_tcp_clenup_task which belongs to the RX (backwards) path, r2t is taken out from r2t queue and inserted to the r2t pool. In iscsi_tcp_get_curr_r2t which belong to the TX (forward) path, r2t is also inserted to the r2t pool and another r2t is pulled from r2t queue. Only in iscsi_tcp_r2t_rsp which is called in the RX path but can requeue to the TX path, r2t is taken from the r2t pool and inserted to the r2t queue. In order to cope with this situation, two spin locks were added, pool2queue and queue2pool. The former protects extracting from the r2t pool and inserting to the r2t queue, and the later protects the extracing from the r2t queue and inserting to the r2t pool. Signed-off-by: Shlomo Pongratz <shlomop@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> [minor fix up to apply cleanly and compile fix] Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2014-02-07 14:41:38 +08:00
spin_unlock_bh(&conn->session->frwd_lock);
return -ENODATA;
}
if (conn->task) {
rc = iscsi_xmit_task(conn, conn->task, false);
if (rc)
goto done;
}
/*
* process mgmt pdus like nops before commands since we should
* only have one nop-out as a ping from us and targets should not
* overflow us with nop-ins
*/
check_mgmt:
while (!list_empty(&conn->mgmtqueue)) {
task = list_entry(conn->mgmtqueue.next, struct iscsi_task,
running);
list_del_init(&task->running);
if (iscsi_prep_mgmt_task(conn, task)) {
[SCSI] libiscsi: Reduce locking contention in fast path Replace the session lock with two locks, a forward lock and a backwards lock named frwd_lock and back_lock respectively. The forward lock protects resources that change while sending a request to the target, such as cmdsn, queued_cmdsn, and allocating task from the commands' pool with kfifo_out. The backward lock protects resources that change while processing a response or in error path, such as cmdsn_exp, cmdsn_max, and returning tasks to the commands' pool with kfifo_in. Under a steady state fast-path situation, that is when one or more processes/threads submit IO to an iscsi device and a single kernel upcall (e.g softirq) is dealing with processing of responses without errors, this patch eliminates the contention between the queuecommand()/request response/scsi_done() flows associated with iscsi sessions. Between the forward and the backward locks exists a strict locking hierarchy. The mutual exclusion zone protected by the forward lock can enclose the mutual exclusion zone protected by the backward lock but not vice versa. For example, in iscsi_conn_teardown or in iscsi_xmit_data when there is a failure and __iscsi_put_task is called, the backward lock is taken while the forward lock is still taken. On the other hand, if in the RX path a nop is to be sent, for example in iscsi_handle_reject or __iscsi_complete_pdu than the forward lock is released and the backward lock is taken for the duration of iscsi_send_nopout, later the backward lock is released and the forward lock is retaken. libiscsi_tcp uses two kernel fifos the r2t pool and the r2t queue. The insertion and deletion from these queues didn't corespond to the assumption taken by the new forward/backwards session locking paradigm. That is, in iscsi_tcp_clenup_task which belongs to the RX (backwards) path, r2t is taken out from r2t queue and inserted to the r2t pool. In iscsi_tcp_get_curr_r2t which belong to the TX (forward) path, r2t is also inserted to the r2t pool and another r2t is pulled from r2t queue. Only in iscsi_tcp_r2t_rsp which is called in the RX path but can requeue to the TX path, r2t is taken from the r2t pool and inserted to the r2t queue. In order to cope with this situation, two spin locks were added, pool2queue and queue2pool. The former protects extracting from the r2t pool and inserting to the r2t queue, and the later protects the extracing from the r2t queue and inserting to the r2t pool. Signed-off-by: Shlomo Pongratz <shlomop@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> [minor fix up to apply cleanly and compile fix] Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2014-02-07 14:41:38 +08:00
/* regular RX path uses back_lock */
spin_lock_bh(&conn->session->back_lock);
__iscsi_put_task(task);
[SCSI] libiscsi: Reduce locking contention in fast path Replace the session lock with two locks, a forward lock and a backwards lock named frwd_lock and back_lock respectively. The forward lock protects resources that change while sending a request to the target, such as cmdsn, queued_cmdsn, and allocating task from the commands' pool with kfifo_out. The backward lock protects resources that change while processing a response or in error path, such as cmdsn_exp, cmdsn_max, and returning tasks to the commands' pool with kfifo_in. Under a steady state fast-path situation, that is when one or more processes/threads submit IO to an iscsi device and a single kernel upcall (e.g softirq) is dealing with processing of responses without errors, this patch eliminates the contention between the queuecommand()/request response/scsi_done() flows associated with iscsi sessions. Between the forward and the backward locks exists a strict locking hierarchy. The mutual exclusion zone protected by the forward lock can enclose the mutual exclusion zone protected by the backward lock but not vice versa. For example, in iscsi_conn_teardown or in iscsi_xmit_data when there is a failure and __iscsi_put_task is called, the backward lock is taken while the forward lock is still taken. On the other hand, if in the RX path a nop is to be sent, for example in iscsi_handle_reject or __iscsi_complete_pdu than the forward lock is released and the backward lock is taken for the duration of iscsi_send_nopout, later the backward lock is released and the forward lock is retaken. libiscsi_tcp uses two kernel fifos the r2t pool and the r2t queue. The insertion and deletion from these queues didn't corespond to the assumption taken by the new forward/backwards session locking paradigm. That is, in iscsi_tcp_clenup_task which belongs to the RX (backwards) path, r2t is taken out from r2t queue and inserted to the r2t pool. In iscsi_tcp_get_curr_r2t which belong to the TX (forward) path, r2t is also inserted to the r2t pool and another r2t is pulled from r2t queue. Only in iscsi_tcp_r2t_rsp which is called in the RX path but can requeue to the TX path, r2t is taken from the r2t pool and inserted to the r2t queue. In order to cope with this situation, two spin locks were added, pool2queue and queue2pool. The former protects extracting from the r2t pool and inserting to the r2t queue, and the later protects the extracing from the r2t queue and inserting to the r2t pool. Signed-off-by: Shlomo Pongratz <shlomop@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> [minor fix up to apply cleanly and compile fix] Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2014-02-07 14:41:38 +08:00
spin_unlock_bh(&conn->session->back_lock);
continue;
}
rc = iscsi_xmit_task(conn, task, false);
if (rc)
goto done;
}
check_requeue:
while (!list_empty(&conn->requeue)) {
/*
* we always do fastlogout - conn stop code will clean up.
*/
if (conn->session->state == ISCSI_STATE_LOGGING_OUT)
break;
task = list_entry(conn->requeue.next, struct iscsi_task,
running);
if (iscsi_check_tmf_restrictions(task, ISCSI_OP_SCSI_DATA_OUT))
break;
list_del_init(&task->running);
rc = iscsi_xmit_task(conn, task, true);
if (rc)
goto done;
if (!list_empty(&conn->mgmtqueue))
goto check_mgmt;
}
/* process pending command queue */
while (!list_empty(&conn->cmdqueue)) {
task = list_entry(conn->cmdqueue.next, struct iscsi_task,
running);
list_del_init(&task->running);
if (conn->session->state == ISCSI_STATE_LOGGING_OUT) {
fail_scsi_task(task, DID_IMM_RETRY);
continue;
}
rc = iscsi_prep_scsi_cmd_pdu(task);
if (rc) {
if (rc == -ENOMEM || rc == -EACCES)
fail_scsi_task(task, DID_IMM_RETRY);
else
fail_scsi_task(task, DID_ABORT);
[SCSI] iscsi_tcp, libiscsi: initial AHS Support at libiscsi generic code - currently code assumes a storage space of pdu header is allocated at llds ctask and is pointed to by iscsi_cmd_task->hdr. Here I add a hdr_max field pertaining to that storage, and an hdr_len that accumulates the current use of the pdu-header. - Add an iscsi_next_hdr() inline which returns the next free space to write new Header at. Also iscsi_next_hdr() is used to retrieve the address at which to write the header-digest. - Add iscsi_add_hdr(length). What the user do is calls iscsi_next_hdr() for address of the new header, than calls iscsi_add_hdr(length) with the size of the new header. iscsi_add_hdr() will check if space is available and update to the new size. length must be padded according to standard. - Add 2 padding inline helpers thanks to Olaf. Current patch does not use them but Following patches will. Also moved definition of ISCSI_PAD_LEN to iscsi_proto.h which had PAD_WORD_LEN that was never used anywhere. - Let iscsi_prep_scsi_cmd_pdu() signal an Error return since now it is possible that it will fail. - I was tired of yet again writing a "this is a digest" comment next to sizeof(__u32) so I defined a new ISCSI_DIGEST_SIZE. Now I don't need any comments. Changed all places that used sizeof(__u32) or "4" in connection to a digest. iscsi_tcp specific code - At struct iscsi_tcp_cmd_task allocate maximum space allowed in standard for all headers following the iscsi_cmd header. and mark it so in iscsi_tcp_session_create() - At iscsi_send_cmd_hdr() retrieve the correct headers size and write header digest at iscsi_next_hdr(). Signed-off-by: Boaz Harrosh <bharrosh@panasas.com> Signed-off-by: Olaf Kirch <olaf.kirch@oracle.com> Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2007-12-14 02:43:23 +08:00
continue;
}
rc = iscsi_xmit_task(conn, task, false);
if (rc)
goto done;
/*
* we could continuously get new task requests so
* we need to check the mgmt queue for nops that need to
* be sent to aviod starvation
*/
if (!list_empty(&conn->mgmtqueue))
goto check_mgmt;
if (!list_empty(&conn->requeue))
goto check_requeue;
}
[SCSI] libiscsi: Reduce locking contention in fast path Replace the session lock with two locks, a forward lock and a backwards lock named frwd_lock and back_lock respectively. The forward lock protects resources that change while sending a request to the target, such as cmdsn, queued_cmdsn, and allocating task from the commands' pool with kfifo_out. The backward lock protects resources that change while processing a response or in error path, such as cmdsn_exp, cmdsn_max, and returning tasks to the commands' pool with kfifo_in. Under a steady state fast-path situation, that is when one or more processes/threads submit IO to an iscsi device and a single kernel upcall (e.g softirq) is dealing with processing of responses without errors, this patch eliminates the contention between the queuecommand()/request response/scsi_done() flows associated with iscsi sessions. Between the forward and the backward locks exists a strict locking hierarchy. The mutual exclusion zone protected by the forward lock can enclose the mutual exclusion zone protected by the backward lock but not vice versa. For example, in iscsi_conn_teardown or in iscsi_xmit_data when there is a failure and __iscsi_put_task is called, the backward lock is taken while the forward lock is still taken. On the other hand, if in the RX path a nop is to be sent, for example in iscsi_handle_reject or __iscsi_complete_pdu than the forward lock is released and the backward lock is taken for the duration of iscsi_send_nopout, later the backward lock is released and the forward lock is retaken. libiscsi_tcp uses two kernel fifos the r2t pool and the r2t queue. The insertion and deletion from these queues didn't corespond to the assumption taken by the new forward/backwards session locking paradigm. That is, in iscsi_tcp_clenup_task which belongs to the RX (backwards) path, r2t is taken out from r2t queue and inserted to the r2t pool. In iscsi_tcp_get_curr_r2t which belong to the TX (forward) path, r2t is also inserted to the r2t pool and another r2t is pulled from r2t queue. Only in iscsi_tcp_r2t_rsp which is called in the RX path but can requeue to the TX path, r2t is taken from the r2t pool and inserted to the r2t queue. In order to cope with this situation, two spin locks were added, pool2queue and queue2pool. The former protects extracting from the r2t pool and inserting to the r2t queue, and the later protects the extracing from the r2t queue and inserting to the r2t pool. Signed-off-by: Shlomo Pongratz <shlomop@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> [minor fix up to apply cleanly and compile fix] Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2014-02-07 14:41:38 +08:00
spin_unlock_bh(&conn->session->frwd_lock);
return -ENODATA;
done:
[SCSI] libiscsi: Reduce locking contention in fast path Replace the session lock with two locks, a forward lock and a backwards lock named frwd_lock and back_lock respectively. The forward lock protects resources that change while sending a request to the target, such as cmdsn, queued_cmdsn, and allocating task from the commands' pool with kfifo_out. The backward lock protects resources that change while processing a response or in error path, such as cmdsn_exp, cmdsn_max, and returning tasks to the commands' pool with kfifo_in. Under a steady state fast-path situation, that is when one or more processes/threads submit IO to an iscsi device and a single kernel upcall (e.g softirq) is dealing with processing of responses without errors, this patch eliminates the contention between the queuecommand()/request response/scsi_done() flows associated with iscsi sessions. Between the forward and the backward locks exists a strict locking hierarchy. The mutual exclusion zone protected by the forward lock can enclose the mutual exclusion zone protected by the backward lock but not vice versa. For example, in iscsi_conn_teardown or in iscsi_xmit_data when there is a failure and __iscsi_put_task is called, the backward lock is taken while the forward lock is still taken. On the other hand, if in the RX path a nop is to be sent, for example in iscsi_handle_reject or __iscsi_complete_pdu than the forward lock is released and the backward lock is taken for the duration of iscsi_send_nopout, later the backward lock is released and the forward lock is retaken. libiscsi_tcp uses two kernel fifos the r2t pool and the r2t queue. The insertion and deletion from these queues didn't corespond to the assumption taken by the new forward/backwards session locking paradigm. That is, in iscsi_tcp_clenup_task which belongs to the RX (backwards) path, r2t is taken out from r2t queue and inserted to the r2t pool. In iscsi_tcp_get_curr_r2t which belong to the TX (forward) path, r2t is also inserted to the r2t pool and another r2t is pulled from r2t queue. Only in iscsi_tcp_r2t_rsp which is called in the RX path but can requeue to the TX path, r2t is taken from the r2t pool and inserted to the r2t queue. In order to cope with this situation, two spin locks were added, pool2queue and queue2pool. The former protects extracting from the r2t pool and inserting to the r2t queue, and the later protects the extracing from the r2t queue and inserting to the r2t pool. Signed-off-by: Shlomo Pongratz <shlomop@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> [minor fix up to apply cleanly and compile fix] Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2014-02-07 14:41:38 +08:00
spin_unlock_bh(&conn->session->frwd_lock);
return rc;
}
static void iscsi_xmitworker(struct work_struct *work)
{
struct iscsi_conn *conn =
container_of(work, struct iscsi_conn, xmitwork);
int rc;
/*
* serialize Xmit worker on a per-connection basis.
*/
do {
rc = iscsi_data_xmit(conn);
} while (rc >= 0 || rc == -EAGAIN);
}
static inline struct iscsi_task *iscsi_alloc_task(struct iscsi_conn *conn,
struct scsi_cmnd *sc)
{
struct iscsi_task *task;
if (!kfifo_out(&conn->session->cmdpool.queue,
(void *) &task, sizeof(void *)))
return NULL;
iscsi_cmd(sc)->age = conn->session->age;
iscsi_cmd(sc)->task = task;
refcount_set(&task->refcount, 1);
task->state = ISCSI_TASK_PENDING;
task->conn = conn;
task->sc = sc;
task->have_checked_conn = false;
task->last_timeout = jiffies;
task->last_xfer = jiffies;
task->protected = false;
INIT_LIST_HEAD(&task->running);
return task;
}
enum {
FAILURE_BAD_HOST = 1,
FAILURE_SESSION_FAILED,
FAILURE_SESSION_FREED,
FAILURE_WINDOW_CLOSED,
FAILURE_OOM,
FAILURE_SESSION_TERMINATE,
FAILURE_SESSION_IN_RECOVERY,
FAILURE_SESSION_RECOVERY_TIMEOUT,
FAILURE_SESSION_LOGGING_OUT,
FAILURE_SESSION_NOT_READY,
};
int iscsi_queuecommand(struct Scsi_Host *host, struct scsi_cmnd *sc)
{
struct iscsi_cls_session *cls_session;
struct iscsi_host *ihost;
int reason = 0;
struct iscsi_session *session;
struct iscsi_conn *conn;
struct iscsi_task *task = NULL;
sc->result = 0;
iscsi_cmd(sc)->task = NULL;
ihost = shost_priv(host);
cls_session = starget_to_session(scsi_target(sc->device));
session = cls_session->dd_data;
[SCSI] libiscsi: Reduce locking contention in fast path Replace the session lock with two locks, a forward lock and a backwards lock named frwd_lock and back_lock respectively. The forward lock protects resources that change while sending a request to the target, such as cmdsn, queued_cmdsn, and allocating task from the commands' pool with kfifo_out. The backward lock protects resources that change while processing a response or in error path, such as cmdsn_exp, cmdsn_max, and returning tasks to the commands' pool with kfifo_in. Under a steady state fast-path situation, that is when one or more processes/threads submit IO to an iscsi device and a single kernel upcall (e.g softirq) is dealing with processing of responses without errors, this patch eliminates the contention between the queuecommand()/request response/scsi_done() flows associated with iscsi sessions. Between the forward and the backward locks exists a strict locking hierarchy. The mutual exclusion zone protected by the forward lock can enclose the mutual exclusion zone protected by the backward lock but not vice versa. For example, in iscsi_conn_teardown or in iscsi_xmit_data when there is a failure and __iscsi_put_task is called, the backward lock is taken while the forward lock is still taken. On the other hand, if in the RX path a nop is to be sent, for example in iscsi_handle_reject or __iscsi_complete_pdu than the forward lock is released and the backward lock is taken for the duration of iscsi_send_nopout, later the backward lock is released and the forward lock is retaken. libiscsi_tcp uses two kernel fifos the r2t pool and the r2t queue. The insertion and deletion from these queues didn't corespond to the assumption taken by the new forward/backwards session locking paradigm. That is, in iscsi_tcp_clenup_task which belongs to the RX (backwards) path, r2t is taken out from r2t queue and inserted to the r2t pool. In iscsi_tcp_get_curr_r2t which belong to the TX (forward) path, r2t is also inserted to the r2t pool and another r2t is pulled from r2t queue. Only in iscsi_tcp_r2t_rsp which is called in the RX path but can requeue to the TX path, r2t is taken from the r2t pool and inserted to the r2t queue. In order to cope with this situation, two spin locks were added, pool2queue and queue2pool. The former protects extracting from the r2t pool and inserting to the r2t queue, and the later protects the extracing from the r2t queue and inserting to the r2t pool. Signed-off-by: Shlomo Pongratz <shlomop@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> [minor fix up to apply cleanly and compile fix] Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2014-02-07 14:41:38 +08:00
spin_lock_bh(&session->frwd_lock);
reason = iscsi_session_chkready(cls_session);
if (reason) {
sc->result = reason;
goto fault;
}
if (session->state != ISCSI_STATE_LOGGED_IN) {
/*
* to handle the race between when we set the recovery state
* and block the session we requeue here (commands could
* be entering our queuecommand while a block is starting
* up because the block code is not locked)
*/
switch (session->state) {
case ISCSI_STATE_FAILED:
scsi: libiscsi: Allow sd_shutdown on bad transport If, for any reason, userland shuts down iscsi transport interfaces before proper logouts - like when logging in to LUNs manually, without logging out on server shutdown, or when automated scripts can't umount/logout from logged LUNs - kernel will hang forever on its sd_sync_cache() logic, after issuing the SYNCHRONIZE_CACHE cmd to all still existent paths. PID: 1 TASK: ffff8801a69b8000 CPU: 1 COMMAND: "systemd-shutdow" #0 [ffff8801a69c3a30] __schedule at ffffffff8183e9ee #1 [ffff8801a69c3a80] schedule at ffffffff8183f0d5 #2 [ffff8801a69c3a98] schedule_timeout at ffffffff81842199 #3 [ffff8801a69c3b40] io_schedule_timeout at ffffffff8183e604 #4 [ffff8801a69c3b70] wait_for_completion_io_timeout at ffffffff8183fc6c #5 [ffff8801a69c3bd0] blk_execute_rq at ffffffff813cfe10 #6 [ffff8801a69c3c88] scsi_execute at ffffffff815c3fc7 #7 [ffff8801a69c3cc8] scsi_execute_req_flags at ffffffff815c60fe #8 [ffff8801a69c3d30] sd_sync_cache at ffffffff815d37d7 #9 [ffff8801a69c3da8] sd_shutdown at ffffffff815d3c3c This happens because iscsi_eh_cmd_timed_out(), the transport layer timeout helper, would tell the queue timeout function (scsi_times_out) to reset the request timer over and over, until the session state is back to logged in state. Unfortunately, during server shutdown, this might never happen again. Other option would be "not to handle" the issue in the transport layer. That would trigger the error handler logic, which would also need the session state to be logged in again. Best option, for such case, is to tell upper layers that the command was handled during the transport layer error handler helper, marking it as DID_NO_CONNECT, which will allow completion and inform about the problem. After the session was marked as ISCSI_STATE_FAILED, due to the first timeout during the server shutdown phase, all subsequent cmds will fail to be queued, allowing upper logic to fail faster. Signed-off-by: Rafael David Tinoco <rafael.tinoco@canonical.com> Reviewed-by: Lee Duncan <lduncan@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-12-08 05:59:13 +08:00
/*
* cmds should fail during shutdown, if the session
* state is bad, allowing completion to happen
*/
if (unlikely(system_state != SYSTEM_RUNNING)) {
reason = FAILURE_SESSION_FAILED;
sc->result = DID_NO_CONNECT << 16;
break;
}
fallthrough;
case ISCSI_STATE_IN_RECOVERY:
reason = FAILURE_SESSION_IN_RECOVERY;
sc->result = DID_IMM_RETRY << 16;
break;
case ISCSI_STATE_LOGGING_OUT:
reason = FAILURE_SESSION_LOGGING_OUT;
sc->result = DID_IMM_RETRY << 16;
break;
case ISCSI_STATE_RECOVERY_FAILED:
reason = FAILURE_SESSION_RECOVERY_TIMEOUT;
sc->result = DID_TRANSPORT_FAILFAST << 16;
break;
case ISCSI_STATE_TERMINATE:
reason = FAILURE_SESSION_TERMINATE;
sc->result = DID_NO_CONNECT << 16;
break;
default:
reason = FAILURE_SESSION_FREED;
sc->result = DID_NO_CONNECT << 16;
}
goto fault;
}
conn = session->leadconn;
if (!conn) {
reason = FAILURE_SESSION_FREED;
sc->result = DID_NO_CONNECT << 16;
goto fault;
}
if (test_bit(ISCSI_CONN_FLAG_SUSPEND_TX, &conn->flags)) {
reason = FAILURE_SESSION_IN_RECOVERY;
sc->result = DID_REQUEUE << 16;
goto fault;
}
if (iscsi_check_cmdsn_window_closed(conn)) {
reason = FAILURE_WINDOW_CLOSED;
goto reject;
}
task = iscsi_alloc_task(conn, sc);
if (!task) {
reason = FAILURE_OOM;
goto reject;
}
if (!ihost->workq) {
reason = iscsi_prep_scsi_cmd_pdu(task);
if (reason) {
if (reason == -ENOMEM || reason == -EACCES) {
reason = FAILURE_OOM;
goto prepd_reject;
} else {
sc->result = DID_ABORT << 16;
goto prepd_fault;
}
}
if (session->tt->xmit_task(task)) {
session->cmdsn--;
reason = FAILURE_SESSION_NOT_READY;
goto prepd_reject;
}
} else {
list_add_tail(&task->running, &conn->cmdqueue);
iscsi_conn_queue_xmit(conn);
}
session->queued_cmdsn++;
[SCSI] libiscsi: Reduce locking contention in fast path Replace the session lock with two locks, a forward lock and a backwards lock named frwd_lock and back_lock respectively. The forward lock protects resources that change while sending a request to the target, such as cmdsn, queued_cmdsn, and allocating task from the commands' pool with kfifo_out. The backward lock protects resources that change while processing a response or in error path, such as cmdsn_exp, cmdsn_max, and returning tasks to the commands' pool with kfifo_in. Under a steady state fast-path situation, that is when one or more processes/threads submit IO to an iscsi device and a single kernel upcall (e.g softirq) is dealing with processing of responses without errors, this patch eliminates the contention between the queuecommand()/request response/scsi_done() flows associated with iscsi sessions. Between the forward and the backward locks exists a strict locking hierarchy. The mutual exclusion zone protected by the forward lock can enclose the mutual exclusion zone protected by the backward lock but not vice versa. For example, in iscsi_conn_teardown or in iscsi_xmit_data when there is a failure and __iscsi_put_task is called, the backward lock is taken while the forward lock is still taken. On the other hand, if in the RX path a nop is to be sent, for example in iscsi_handle_reject or __iscsi_complete_pdu than the forward lock is released and the backward lock is taken for the duration of iscsi_send_nopout, later the backward lock is released and the forward lock is retaken. libiscsi_tcp uses two kernel fifos the r2t pool and the r2t queue. The insertion and deletion from these queues didn't corespond to the assumption taken by the new forward/backwards session locking paradigm. That is, in iscsi_tcp_clenup_task which belongs to the RX (backwards) path, r2t is taken out from r2t queue and inserted to the r2t pool. In iscsi_tcp_get_curr_r2t which belong to the TX (forward) path, r2t is also inserted to the r2t pool and another r2t is pulled from r2t queue. Only in iscsi_tcp_r2t_rsp which is called in the RX path but can requeue to the TX path, r2t is taken from the r2t pool and inserted to the r2t queue. In order to cope with this situation, two spin locks were added, pool2queue and queue2pool. The former protects extracting from the r2t pool and inserting to the r2t queue, and the later protects the extracing from the r2t queue and inserting to the r2t pool. Signed-off-by: Shlomo Pongratz <shlomop@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> [minor fix up to apply cleanly and compile fix] Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2014-02-07 14:41:38 +08:00
spin_unlock_bh(&session->frwd_lock);
return 0;
prepd_reject:
spin_lock_bh(&session->back_lock);
iscsi_complete_task(task, ISCSI_TASK_REQUEUE_SCSIQ);
spin_unlock_bh(&session->back_lock);
reject:
[SCSI] libiscsi: Reduce locking contention in fast path Replace the session lock with two locks, a forward lock and a backwards lock named frwd_lock and back_lock respectively. The forward lock protects resources that change while sending a request to the target, such as cmdsn, queued_cmdsn, and allocating task from the commands' pool with kfifo_out. The backward lock protects resources that change while processing a response or in error path, such as cmdsn_exp, cmdsn_max, and returning tasks to the commands' pool with kfifo_in. Under a steady state fast-path situation, that is when one or more processes/threads submit IO to an iscsi device and a single kernel upcall (e.g softirq) is dealing with processing of responses without errors, this patch eliminates the contention between the queuecommand()/request response/scsi_done() flows associated with iscsi sessions. Between the forward and the backward locks exists a strict locking hierarchy. The mutual exclusion zone protected by the forward lock can enclose the mutual exclusion zone protected by the backward lock but not vice versa. For example, in iscsi_conn_teardown or in iscsi_xmit_data when there is a failure and __iscsi_put_task is called, the backward lock is taken while the forward lock is still taken. On the other hand, if in the RX path a nop is to be sent, for example in iscsi_handle_reject or __iscsi_complete_pdu than the forward lock is released and the backward lock is taken for the duration of iscsi_send_nopout, later the backward lock is released and the forward lock is retaken. libiscsi_tcp uses two kernel fifos the r2t pool and the r2t queue. The insertion and deletion from these queues didn't corespond to the assumption taken by the new forward/backwards session locking paradigm. That is, in iscsi_tcp_clenup_task which belongs to the RX (backwards) path, r2t is taken out from r2t queue and inserted to the r2t pool. In iscsi_tcp_get_curr_r2t which belong to the TX (forward) path, r2t is also inserted to the r2t pool and another r2t is pulled from r2t queue. Only in iscsi_tcp_r2t_rsp which is called in the RX path but can requeue to the TX path, r2t is taken from the r2t pool and inserted to the r2t queue. In order to cope with this situation, two spin locks were added, pool2queue and queue2pool. The former protects extracting from the r2t pool and inserting to the r2t queue, and the later protects the extracing from the r2t queue and inserting to the r2t pool. Signed-off-by: Shlomo Pongratz <shlomop@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> [minor fix up to apply cleanly and compile fix] Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2014-02-07 14:41:38 +08:00
spin_unlock_bh(&session->frwd_lock);
ISCSI_DBG_SESSION(session, "cmd 0x%x rejected (%d)\n",
sc->cmnd[0], reason);
return SCSI_MLQUEUE_TARGET_BUSY;
prepd_fault:
spin_lock_bh(&session->back_lock);
iscsi_complete_task(task, ISCSI_TASK_REQUEUE_SCSIQ);
spin_unlock_bh(&session->back_lock);
fault:
[SCSI] libiscsi: Reduce locking contention in fast path Replace the session lock with two locks, a forward lock and a backwards lock named frwd_lock and back_lock respectively. The forward lock protects resources that change while sending a request to the target, such as cmdsn, queued_cmdsn, and allocating task from the commands' pool with kfifo_out. The backward lock protects resources that change while processing a response or in error path, such as cmdsn_exp, cmdsn_max, and returning tasks to the commands' pool with kfifo_in. Under a steady state fast-path situation, that is when one or more processes/threads submit IO to an iscsi device and a single kernel upcall (e.g softirq) is dealing with processing of responses without errors, this patch eliminates the contention between the queuecommand()/request response/scsi_done() flows associated with iscsi sessions. Between the forward and the backward locks exists a strict locking hierarchy. The mutual exclusion zone protected by the forward lock can enclose the mutual exclusion zone protected by the backward lock but not vice versa. For example, in iscsi_conn_teardown or in iscsi_xmit_data when there is a failure and __iscsi_put_task is called, the backward lock is taken while the forward lock is still taken. On the other hand, if in the RX path a nop is to be sent, for example in iscsi_handle_reject or __iscsi_complete_pdu than the forward lock is released and the backward lock is taken for the duration of iscsi_send_nopout, later the backward lock is released and the forward lock is retaken. libiscsi_tcp uses two kernel fifos the r2t pool and the r2t queue. The insertion and deletion from these queues didn't corespond to the assumption taken by the new forward/backwards session locking paradigm. That is, in iscsi_tcp_clenup_task which belongs to the RX (backwards) path, r2t is taken out from r2t queue and inserted to the r2t pool. In iscsi_tcp_get_curr_r2t which belong to the TX (forward) path, r2t is also inserted to the r2t pool and another r2t is pulled from r2t queue. Only in iscsi_tcp_r2t_rsp which is called in the RX path but can requeue to the TX path, r2t is taken from the r2t pool and inserted to the r2t queue. In order to cope with this situation, two spin locks were added, pool2queue and queue2pool. The former protects extracting from the r2t pool and inserting to the r2t queue, and the later protects the extracing from the r2t queue and inserting to the r2t pool. Signed-off-by: Shlomo Pongratz <shlomop@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> [minor fix up to apply cleanly and compile fix] Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2014-02-07 14:41:38 +08:00
spin_unlock_bh(&session->frwd_lock);
ISCSI_DBG_SESSION(session, "iscsi: cmd 0x%x is not queued (%d)\n",
sc->cmnd[0], reason);
scsi_set_resid(sc, scsi_bufflen(sc));
scsi_done(sc);
return 0;
}
EXPORT_SYMBOL_GPL(iscsi_queuecommand);
int iscsi_target_alloc(struct scsi_target *starget)
{
struct iscsi_cls_session *cls_session = starget_to_session(starget);
struct iscsi_session *session = cls_session->dd_data;
starget->can_queue = session->scsi_cmds_max;
return 0;
}
EXPORT_SYMBOL_GPL(iscsi_target_alloc);
static void iscsi_tmf_timedout(struct timer_list *t)
{
struct iscsi_session *session = from_timer(session, t, tmf_timer);
[SCSI] libiscsi: Reduce locking contention in fast path Replace the session lock with two locks, a forward lock and a backwards lock named frwd_lock and back_lock respectively. The forward lock protects resources that change while sending a request to the target, such as cmdsn, queued_cmdsn, and allocating task from the commands' pool with kfifo_out. The backward lock protects resources that change while processing a response or in error path, such as cmdsn_exp, cmdsn_max, and returning tasks to the commands' pool with kfifo_in. Under a steady state fast-path situation, that is when one or more processes/threads submit IO to an iscsi device and a single kernel upcall (e.g softirq) is dealing with processing of responses without errors, this patch eliminates the contention between the queuecommand()/request response/scsi_done() flows associated with iscsi sessions. Between the forward and the backward locks exists a strict locking hierarchy. The mutual exclusion zone protected by the forward lock can enclose the mutual exclusion zone protected by the backward lock but not vice versa. For example, in iscsi_conn_teardown or in iscsi_xmit_data when there is a failure and __iscsi_put_task is called, the backward lock is taken while the forward lock is still taken. On the other hand, if in the RX path a nop is to be sent, for example in iscsi_handle_reject or __iscsi_complete_pdu than the forward lock is released and the backward lock is taken for the duration of iscsi_send_nopout, later the backward lock is released and the forward lock is retaken. libiscsi_tcp uses two kernel fifos the r2t pool and the r2t queue. The insertion and deletion from these queues didn't corespond to the assumption taken by the new forward/backwards session locking paradigm. That is, in iscsi_tcp_clenup_task which belongs to the RX (backwards) path, r2t is taken out from r2t queue and inserted to the r2t pool. In iscsi_tcp_get_curr_r2t which belong to the TX (forward) path, r2t is also inserted to the r2t pool and another r2t is pulled from r2t queue. Only in iscsi_tcp_r2t_rsp which is called in the RX path but can requeue to the TX path, r2t is taken from the r2t pool and inserted to the r2t queue. In order to cope with this situation, two spin locks were added, pool2queue and queue2pool. The former protects extracting from the r2t pool and inserting to the r2t queue, and the later protects the extracing from the r2t queue and inserting to the r2t pool. Signed-off-by: Shlomo Pongratz <shlomop@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> [minor fix up to apply cleanly and compile fix] Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2014-02-07 14:41:38 +08:00
spin_lock(&session->frwd_lock);
if (session->tmf_state == TMF_QUEUED) {
session->tmf_state = TMF_TIMEDOUT;
ISCSI_DBG_EH(session, "tmf timedout\n");
/* unblock eh_abort() */
wake_up(&session->ehwait);
}
[SCSI] libiscsi: Reduce locking contention in fast path Replace the session lock with two locks, a forward lock and a backwards lock named frwd_lock and back_lock respectively. The forward lock protects resources that change while sending a request to the target, such as cmdsn, queued_cmdsn, and allocating task from the commands' pool with kfifo_out. The backward lock protects resources that change while processing a response or in error path, such as cmdsn_exp, cmdsn_max, and returning tasks to the commands' pool with kfifo_in. Under a steady state fast-path situation, that is when one or more processes/threads submit IO to an iscsi device and a single kernel upcall (e.g softirq) is dealing with processing of responses without errors, this patch eliminates the contention between the queuecommand()/request response/scsi_done() flows associated with iscsi sessions. Between the forward and the backward locks exists a strict locking hierarchy. The mutual exclusion zone protected by the forward lock can enclose the mutual exclusion zone protected by the backward lock but not vice versa. For example, in iscsi_conn_teardown or in iscsi_xmit_data when there is a failure and __iscsi_put_task is called, the backward lock is taken while the forward lock is still taken. On the other hand, if in the RX path a nop is to be sent, for example in iscsi_handle_reject or __iscsi_complete_pdu than the forward lock is released and the backward lock is taken for the duration of iscsi_send_nopout, later the backward lock is released and the forward lock is retaken. libiscsi_tcp uses two kernel fifos the r2t pool and the r2t queue. The insertion and deletion from these queues didn't corespond to the assumption taken by the new forward/backwards session locking paradigm. That is, in iscsi_tcp_clenup_task which belongs to the RX (backwards) path, r2t is taken out from r2t queue and inserted to the r2t pool. In iscsi_tcp_get_curr_r2t which belong to the TX (forward) path, r2t is also inserted to the r2t pool and another r2t is pulled from r2t queue. Only in iscsi_tcp_r2t_rsp which is called in the RX path but can requeue to the TX path, r2t is taken from the r2t pool and inserted to the r2t queue. In order to cope with this situation, two spin locks were added, pool2queue and queue2pool. The former protects extracting from the r2t pool and inserting to the r2t queue, and the later protects the extracing from the r2t queue and inserting to the r2t pool. Signed-off-by: Shlomo Pongratz <shlomop@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> [minor fix up to apply cleanly and compile fix] Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2014-02-07 14:41:38 +08:00
spin_unlock(&session->frwd_lock);
}
static int iscsi_exec_task_mgmt_fn(struct iscsi_conn *conn,
struct iscsi_tm *hdr, int age,
int timeout)
__must_hold(&session->frwd_lock)
{
struct iscsi_session *session = conn->session;
if (__iscsi_conn_send_pdu(conn, (struct iscsi_hdr *)hdr, NULL, 0)) {
[SCSI] libiscsi: Reduce locking contention in fast path Replace the session lock with two locks, a forward lock and a backwards lock named frwd_lock and back_lock respectively. The forward lock protects resources that change while sending a request to the target, such as cmdsn, queued_cmdsn, and allocating task from the commands' pool with kfifo_out. The backward lock protects resources that change while processing a response or in error path, such as cmdsn_exp, cmdsn_max, and returning tasks to the commands' pool with kfifo_in. Under a steady state fast-path situation, that is when one or more processes/threads submit IO to an iscsi device and a single kernel upcall (e.g softirq) is dealing with processing of responses without errors, this patch eliminates the contention between the queuecommand()/request response/scsi_done() flows associated with iscsi sessions. Between the forward and the backward locks exists a strict locking hierarchy. The mutual exclusion zone protected by the forward lock can enclose the mutual exclusion zone protected by the backward lock but not vice versa. For example, in iscsi_conn_teardown or in iscsi_xmit_data when there is a failure and __iscsi_put_task is called, the backward lock is taken while the forward lock is still taken. On the other hand, if in the RX path a nop is to be sent, for example in iscsi_handle_reject or __iscsi_complete_pdu than the forward lock is released and the backward lock is taken for the duration of iscsi_send_nopout, later the backward lock is released and the forward lock is retaken. libiscsi_tcp uses two kernel fifos the r2t pool and the r2t queue. The insertion and deletion from these queues didn't corespond to the assumption taken by the new forward/backwards session locking paradigm. That is, in iscsi_tcp_clenup_task which belongs to the RX (backwards) path, r2t is taken out from r2t queue and inserted to the r2t pool. In iscsi_tcp_get_curr_r2t which belong to the TX (forward) path, r2t is also inserted to the r2t pool and another r2t is pulled from r2t queue. Only in iscsi_tcp_r2t_rsp which is called in the RX path but can requeue to the TX path, r2t is taken from the r2t pool and inserted to the r2t queue. In order to cope with this situation, two spin locks were added, pool2queue and queue2pool. The former protects extracting from the r2t pool and inserting to the r2t queue, and the later protects the extracing from the r2t queue and inserting to the r2t pool. Signed-off-by: Shlomo Pongratz <shlomop@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> [minor fix up to apply cleanly and compile fix] Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2014-02-07 14:41:38 +08:00
spin_unlock_bh(&session->frwd_lock);
iscsi_conn_printk(KERN_ERR, conn, "Could not send TMF.\n");
iscsi_conn_failure(conn, ISCSI_ERR_CONN_FAILED);
[SCSI] libiscsi: Reduce locking contention in fast path Replace the session lock with two locks, a forward lock and a backwards lock named frwd_lock and back_lock respectively. The forward lock protects resources that change while sending a request to the target, such as cmdsn, queued_cmdsn, and allocating task from the commands' pool with kfifo_out. The backward lock protects resources that change while processing a response or in error path, such as cmdsn_exp, cmdsn_max, and returning tasks to the commands' pool with kfifo_in. Under a steady state fast-path situation, that is when one or more processes/threads submit IO to an iscsi device and a single kernel upcall (e.g softirq) is dealing with processing of responses without errors, this patch eliminates the contention between the queuecommand()/request response/scsi_done() flows associated with iscsi sessions. Between the forward and the backward locks exists a strict locking hierarchy. The mutual exclusion zone protected by the forward lock can enclose the mutual exclusion zone protected by the backward lock but not vice versa. For example, in iscsi_conn_teardown or in iscsi_xmit_data when there is a failure and __iscsi_put_task is called, the backward lock is taken while the forward lock is still taken. On the other hand, if in the RX path a nop is to be sent, for example in iscsi_handle_reject or __iscsi_complete_pdu than the forward lock is released and the backward lock is taken for the duration of iscsi_send_nopout, later the backward lock is released and the forward lock is retaken. libiscsi_tcp uses two kernel fifos the r2t pool and the r2t queue. The insertion and deletion from these queues didn't corespond to the assumption taken by the new forward/backwards session locking paradigm. That is, in iscsi_tcp_clenup_task which belongs to the RX (backwards) path, r2t is taken out from r2t queue and inserted to the r2t pool. In iscsi_tcp_get_curr_r2t which belong to the TX (forward) path, r2t is also inserted to the r2t pool and another r2t is pulled from r2t queue. Only in iscsi_tcp_r2t_rsp which is called in the RX path but can requeue to the TX path, r2t is taken from the r2t pool and inserted to the r2t queue. In order to cope with this situation, two spin locks were added, pool2queue and queue2pool. The former protects extracting from the r2t pool and inserting to the r2t queue, and the later protects the extracing from the r2t queue and inserting to the r2t pool. Signed-off-by: Shlomo Pongratz <shlomop@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> [minor fix up to apply cleanly and compile fix] Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2014-02-07 14:41:38 +08:00
spin_lock_bh(&session->frwd_lock);
return -EPERM;
}
conn->tmfcmd_pdus_cnt++;
session->tmf_timer.expires = timeout * HZ + jiffies;
add_timer(&session->tmf_timer);
ISCSI_DBG_EH(session, "tmf set timeout\n");
[SCSI] libiscsi: Reduce locking contention in fast path Replace the session lock with two locks, a forward lock and a backwards lock named frwd_lock and back_lock respectively. The forward lock protects resources that change while sending a request to the target, such as cmdsn, queued_cmdsn, and allocating task from the commands' pool with kfifo_out. The backward lock protects resources that change while processing a response or in error path, such as cmdsn_exp, cmdsn_max, and returning tasks to the commands' pool with kfifo_in. Under a steady state fast-path situation, that is when one or more processes/threads submit IO to an iscsi device and a single kernel upcall (e.g softirq) is dealing with processing of responses without errors, this patch eliminates the contention between the queuecommand()/request response/scsi_done() flows associated with iscsi sessions. Between the forward and the backward locks exists a strict locking hierarchy. The mutual exclusion zone protected by the forward lock can enclose the mutual exclusion zone protected by the backward lock but not vice versa. For example, in iscsi_conn_teardown or in iscsi_xmit_data when there is a failure and __iscsi_put_task is called, the backward lock is taken while the forward lock is still taken. On the other hand, if in the RX path a nop is to be sent, for example in iscsi_handle_reject or __iscsi_complete_pdu than the forward lock is released and the backward lock is taken for the duration of iscsi_send_nopout, later the backward lock is released and the forward lock is retaken. libiscsi_tcp uses two kernel fifos the r2t pool and the r2t queue. The insertion and deletion from these queues didn't corespond to the assumption taken by the new forward/backwards session locking paradigm. That is, in iscsi_tcp_clenup_task which belongs to the RX (backwards) path, r2t is taken out from r2t queue and inserted to the r2t pool. In iscsi_tcp_get_curr_r2t which belong to the TX (forward) path, r2t is also inserted to the r2t pool and another r2t is pulled from r2t queue. Only in iscsi_tcp_r2t_rsp which is called in the RX path but can requeue to the TX path, r2t is taken from the r2t pool and inserted to the r2t queue. In order to cope with this situation, two spin locks were added, pool2queue and queue2pool. The former protects extracting from the r2t pool and inserting to the r2t queue, and the later protects the extracing from the r2t queue and inserting to the r2t pool. Signed-off-by: Shlomo Pongratz <shlomop@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> [minor fix up to apply cleanly and compile fix] Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2014-02-07 14:41:38 +08:00
spin_unlock_bh(&session->frwd_lock);
mutex_unlock(&session->eh_mutex);
/*
* block eh thread until:
*
* 1) tmf response
* 2) tmf timeout
* 3) session is terminated or restarted or userspace has
* given up on recovery
*/
wait_event_interruptible(session->ehwait, age != session->age ||
session->state != ISCSI_STATE_LOGGED_IN ||
session->tmf_state != TMF_QUEUED);
if (signal_pending(current))
flush_signals(current);
del_timer_sync(&session->tmf_timer);
mutex_lock(&session->eh_mutex);
[SCSI] libiscsi: Reduce locking contention in fast path Replace the session lock with two locks, a forward lock and a backwards lock named frwd_lock and back_lock respectively. The forward lock protects resources that change while sending a request to the target, such as cmdsn, queued_cmdsn, and allocating task from the commands' pool with kfifo_out. The backward lock protects resources that change while processing a response or in error path, such as cmdsn_exp, cmdsn_max, and returning tasks to the commands' pool with kfifo_in. Under a steady state fast-path situation, that is when one or more processes/threads submit IO to an iscsi device and a single kernel upcall (e.g softirq) is dealing with processing of responses without errors, this patch eliminates the contention between the queuecommand()/request response/scsi_done() flows associated with iscsi sessions. Between the forward and the backward locks exists a strict locking hierarchy. The mutual exclusion zone protected by the forward lock can enclose the mutual exclusion zone protected by the backward lock but not vice versa. For example, in iscsi_conn_teardown or in iscsi_xmit_data when there is a failure and __iscsi_put_task is called, the backward lock is taken while the forward lock is still taken. On the other hand, if in the RX path a nop is to be sent, for example in iscsi_handle_reject or __iscsi_complete_pdu than the forward lock is released and the backward lock is taken for the duration of iscsi_send_nopout, later the backward lock is released and the forward lock is retaken. libiscsi_tcp uses two kernel fifos the r2t pool and the r2t queue. The insertion and deletion from these queues didn't corespond to the assumption taken by the new forward/backwards session locking paradigm. That is, in iscsi_tcp_clenup_task which belongs to the RX (backwards) path, r2t is taken out from r2t queue and inserted to the r2t pool. In iscsi_tcp_get_curr_r2t which belong to the TX (forward) path, r2t is also inserted to the r2t pool and another r2t is pulled from r2t queue. Only in iscsi_tcp_r2t_rsp which is called in the RX path but can requeue to the TX path, r2t is taken from the r2t pool and inserted to the r2t queue. In order to cope with this situation, two spin locks were added, pool2queue and queue2pool. The former protects extracting from the r2t pool and inserting to the r2t queue, and the later protects the extracing from the r2t queue and inserting to the r2t pool. Signed-off-by: Shlomo Pongratz <shlomop@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> [minor fix up to apply cleanly and compile fix] Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2014-02-07 14:41:38 +08:00
spin_lock_bh(&session->frwd_lock);
/* if the session drops it will clean up the task */
if (age != session->age ||
session->state != ISCSI_STATE_LOGGED_IN)
return -ENOTCONN;
return 0;
}
/*
scsi: libiscsi: Fix iscsi_task use after free() The following bug was reported and debugged by wubo40@huawei.com: When testing kernel 4.18 version, NULL pointer dereference problem occurs in iscsi_eh_cmd_timed_out() function. I think this bug in the upstream is still exists. The analysis reasons are as follows: 1) For some reason, I/O command did not complete within the timeout period. The block layer timer works, call scsi_times_out() to handle I/O timeout logic. At the same time the command just completes. 2) scsi_times_out() call iscsi_eh_cmd_timed_out() to process timeout logic. Although there is an NULL judgment for the task, the task has not been released yet now. 3) iscsi_complete_task() calls __iscsi_put_task(). The task reference count reaches zero, the conditions for free task is met, then iscsi_free_task() frees the task, and sets sc->SCp.ptr = NULL. After iscsi_eh_cmd_timed_out() passes the task judgment check, there can still be NULL dereference scenarios. CPU0 CPU3 |- scsi_times_out() |- iscsi_complete_task() | | |- iscsi_eh_cmd_timed_out() |- __iscsi_put_task() | | |- task=sc->SCp.ptr, task is not NUL, check passed |- iscsi_free_task(task) | | | |-> sc->SCp.ptr = NULL | | |- task is NULL now, NULL pointer dereference | | | \|/ \|/ Calltrace: [380751.840862] BUG: unable to handle kernel NULL pointer dereference at 0000000000000138 [380751.843709] PGD 0 P4D 0 [380751.844770] Oops: 0000 [#1] SMP PTI [380751.846283] CPU: 0 PID: 403 Comm: kworker/0:1H Kdump: loaded Tainted: G [380751.851467] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996) [380751.856521] Workqueue: kblockd blk_mq_timeout_work [380751.858527] RIP: 0010:iscsi_eh_cmd_timed_out+0x15e/0x2e0 [libiscsi] [380751.861129] Code: 83 ea 01 48 8d 74 d0 08 48 8b 10 48 8b 4a 50 48 85 c9 74 2c 48 39 d5 74 [380751.868811] RSP: 0018:ffffc1e280a5fd58 EFLAGS: 00010246 [380751.870978] RAX: ffff9fd1e84e15e0 RBX: ffff9fd1e84e6dd0 RCX: 0000000116acc580 [380751.873791] RDX: ffff9fd1f97a9400 RSI: ffff9fd1e84e1800 RDI: ffff9fd1e4d6d420 [380751.876059] RBP: ffff9fd1e4d49000 R08: 0000000116acc580 R09: 0000000116acc580 [380751.878284] R10: 0000000000000000 R11: 0000000000000000 R12: ffff9fd1e6e931e8 [380751.880500] R13: ffff9fd1e84e6ee0 R14: 0000000000000010 R15: 0000000000000003 [380751.882687] FS: 0000000000000000(0000) GS:ffff9fd1fac00000(0000) knlGS:0000000000000000 [380751.885236] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [380751.887059] CR2: 0000000000000138 CR3: 000000011860a001 CR4: 00000000003606f0 [380751.889308] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [380751.891523] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [380751.893738] Call Trace: [380751.894639] scsi_times_out+0x60/0x1c0 [380751.895861] blk_mq_check_expired+0x144/0x200 [380751.897302] ? __switch_to_asm+0x35/0x70 [380751.898551] blk_mq_queue_tag_busy_iter+0x195/0x2e0 [380751.900091] ? __blk_mq_requeue_request+0x100/0x100 [380751.901611] ? __switch_to_asm+0x41/0x70 [380751.902853] ? __blk_mq_requeue_request+0x100/0x100 [380751.904398] blk_mq_timeout_work+0x54/0x130 [380751.905740] process_one_work+0x195/0x390 [380751.907228] worker_thread+0x30/0x390 [380751.908713] ? process_one_work+0x390/0x390 [380751.910350] kthread+0x10d/0x130 [380751.911470] ? kthread_flush_work_fn+0x10/0x10 [380751.913007] ret_from_fork+0x35/0x40 crash> dis -l iscsi_eh_cmd_timed_out+0x15e xxxxx/drivers/scsi/libiscsi.c: 2062 1970 enum blk_eh_timer_return iscsi_eh_cmd_timed_out(struct scsi_cmnd *sc) { ... 1984 spin_lock_bh(&session->frwd_lock); 1985 task = (struct iscsi_task *)sc->SCp.ptr; 1986 if (!task) { 1987 /* 1988 * Raced with completion. Blk layer has taken ownership 1989 * so let timeout code complete it now. 1990 */ 1991 rc = BLK_EH_DONE; 1992 goto done; 1993 } ... 2052 for (i = 0; i < conn->session->cmds_max; i++) { 2053 running_task = conn->session->cmds[i]; 2054 if (!running_task->sc || running_task == task || 2055 running_task->state != ISCSI_TASK_RUNNING) 2056 continue; 2057 2058 /* 2059 * Only check if cmds started before this one have made 2060 * progress, or this could never fail 2061 */ 2062 if (time_after(running_task->sc->jiffies_at_alloc, 2063 task->sc->jiffies_at_alloc)) <--- 2064 continue; 2065 ... } carsh> struct scsi_cmnd ffff9fd1e6e931e8 struct scsi_cmnd { ... SCp = { ptr = 0x0, <--- iscsi_task this_residual = 0, ... }, } To prevent this, we take a ref to the cmd under the back (completion) lock so if the completion side were to call iscsi_complete_task() on the task while the timer/eh paths are not holding the back_lock it will not be freed from under us. Note that this requires the previous patch, "scsi: libiscsi: Drop taskqueuelock" because bnx2i sleeps in its cleanup_task callout if the cmd is aborted. If the EH/timer and completion path are racing we don't know which path will do the last put. The previous patch moved the operations we needed to do under the forward lock to cleanup_queued_task. Once that has run we can drop the forward lock for the cmd and bnx2i no longer has to worry about if the EH, timer or completion path did the ast put and if the forward lock is held or not since it won't be. Link: https://lore.kernel.org/r/20210207044608.27585-4-michael.christie@oracle.com Reported-by: Wu Bo <wubo40@huawei.com> Reviewed-by: Lee Duncan <lduncan@suse.com> Signed-off-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-02-07 12:46:02 +08:00
* Fail commands. session frwd lock held and xmit thread flushed.
*/
static void fail_scsi_tasks(struct iscsi_conn *conn, u64 lun, int error)
{
scsi: libiscsi: Fix iscsi_task use after free() The following bug was reported and debugged by wubo40@huawei.com: When testing kernel 4.18 version, NULL pointer dereference problem occurs in iscsi_eh_cmd_timed_out() function. I think this bug in the upstream is still exists. The analysis reasons are as follows: 1) For some reason, I/O command did not complete within the timeout period. The block layer timer works, call scsi_times_out() to handle I/O timeout logic. At the same time the command just completes. 2) scsi_times_out() call iscsi_eh_cmd_timed_out() to process timeout logic. Although there is an NULL judgment for the task, the task has not been released yet now. 3) iscsi_complete_task() calls __iscsi_put_task(). The task reference count reaches zero, the conditions for free task is met, then iscsi_free_task() frees the task, and sets sc->SCp.ptr = NULL. After iscsi_eh_cmd_timed_out() passes the task judgment check, there can still be NULL dereference scenarios. CPU0 CPU3 |- scsi_times_out() |- iscsi_complete_task() | | |- iscsi_eh_cmd_timed_out() |- __iscsi_put_task() | | |- task=sc->SCp.ptr, task is not NUL, check passed |- iscsi_free_task(task) | | | |-> sc->SCp.ptr = NULL | | |- task is NULL now, NULL pointer dereference | | | \|/ \|/ Calltrace: [380751.840862] BUG: unable to handle kernel NULL pointer dereference at 0000000000000138 [380751.843709] PGD 0 P4D 0 [380751.844770] Oops: 0000 [#1] SMP PTI [380751.846283] CPU: 0 PID: 403 Comm: kworker/0:1H Kdump: loaded Tainted: G [380751.851467] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996) [380751.856521] Workqueue: kblockd blk_mq_timeout_work [380751.858527] RIP: 0010:iscsi_eh_cmd_timed_out+0x15e/0x2e0 [libiscsi] [380751.861129] Code: 83 ea 01 48 8d 74 d0 08 48 8b 10 48 8b 4a 50 48 85 c9 74 2c 48 39 d5 74 [380751.868811] RSP: 0018:ffffc1e280a5fd58 EFLAGS: 00010246 [380751.870978] RAX: ffff9fd1e84e15e0 RBX: ffff9fd1e84e6dd0 RCX: 0000000116acc580 [380751.873791] RDX: ffff9fd1f97a9400 RSI: ffff9fd1e84e1800 RDI: ffff9fd1e4d6d420 [380751.876059] RBP: ffff9fd1e4d49000 R08: 0000000116acc580 R09: 0000000116acc580 [380751.878284] R10: 0000000000000000 R11: 0000000000000000 R12: ffff9fd1e6e931e8 [380751.880500] R13: ffff9fd1e84e6ee0 R14: 0000000000000010 R15: 0000000000000003 [380751.882687] FS: 0000000000000000(0000) GS:ffff9fd1fac00000(0000) knlGS:0000000000000000 [380751.885236] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [380751.887059] CR2: 0000000000000138 CR3: 000000011860a001 CR4: 00000000003606f0 [380751.889308] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [380751.891523] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [380751.893738] Call Trace: [380751.894639] scsi_times_out+0x60/0x1c0 [380751.895861] blk_mq_check_expired+0x144/0x200 [380751.897302] ? __switch_to_asm+0x35/0x70 [380751.898551] blk_mq_queue_tag_busy_iter+0x195/0x2e0 [380751.900091] ? __blk_mq_requeue_request+0x100/0x100 [380751.901611] ? __switch_to_asm+0x41/0x70 [380751.902853] ? __blk_mq_requeue_request+0x100/0x100 [380751.904398] blk_mq_timeout_work+0x54/0x130 [380751.905740] process_one_work+0x195/0x390 [380751.907228] worker_thread+0x30/0x390 [380751.908713] ? process_one_work+0x390/0x390 [380751.910350] kthread+0x10d/0x130 [380751.911470] ? kthread_flush_work_fn+0x10/0x10 [380751.913007] ret_from_fork+0x35/0x40 crash> dis -l iscsi_eh_cmd_timed_out+0x15e xxxxx/drivers/scsi/libiscsi.c: 2062 1970 enum blk_eh_timer_return iscsi_eh_cmd_timed_out(struct scsi_cmnd *sc) { ... 1984 spin_lock_bh(&session->frwd_lock); 1985 task = (struct iscsi_task *)sc->SCp.ptr; 1986 if (!task) { 1987 /* 1988 * Raced with completion. Blk layer has taken ownership 1989 * so let timeout code complete it now. 1990 */ 1991 rc = BLK_EH_DONE; 1992 goto done; 1993 } ... 2052 for (i = 0; i < conn->session->cmds_max; i++) { 2053 running_task = conn->session->cmds[i]; 2054 if (!running_task->sc || running_task == task || 2055 running_task->state != ISCSI_TASK_RUNNING) 2056 continue; 2057 2058 /* 2059 * Only check if cmds started before this one have made 2060 * progress, or this could never fail 2061 */ 2062 if (time_after(running_task->sc->jiffies_at_alloc, 2063 task->sc->jiffies_at_alloc)) <--- 2064 continue; 2065 ... } carsh> struct scsi_cmnd ffff9fd1e6e931e8 struct scsi_cmnd { ... SCp = { ptr = 0x0, <--- iscsi_task this_residual = 0, ... }, } To prevent this, we take a ref to the cmd under the back (completion) lock so if the completion side were to call iscsi_complete_task() on the task while the timer/eh paths are not holding the back_lock it will not be freed from under us. Note that this requires the previous patch, "scsi: libiscsi: Drop taskqueuelock" because bnx2i sleeps in its cleanup_task callout if the cmd is aborted. If the EH/timer and completion path are racing we don't know which path will do the last put. The previous patch moved the operations we needed to do under the forward lock to cleanup_queued_task. Once that has run we can drop the forward lock for the cmd and bnx2i no longer has to worry about if the EH, timer or completion path did the ast put and if the forward lock is held or not since it won't be. Link: https://lore.kernel.org/r/20210207044608.27585-4-michael.christie@oracle.com Reported-by: Wu Bo <wubo40@huawei.com> Reviewed-by: Lee Duncan <lduncan@suse.com> Signed-off-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-02-07 12:46:02 +08:00
struct iscsi_session *session = conn->session;
struct iscsi_task *task;
int i;
scsi: iscsi: Remove iscsi_get_task back_lock requirement We currently require that the back_lock is held when calling the functions that manipulate the iscsi_task refcount. The only reason for this is to handle races where we are handling SCSI-ml EH callbacks and the cmd is completing at the same time the normal completion path is running, and we can't return from the EH callback until the driver has stopped accessing the cmd. Holding the back_lock while also accessing the task->state made it simple to check that a cmd is completing and also get/put a refcount at the same time, and at the time we were not as concerned about performance. The problem is that we don't want to take the back_lock from the xmit path for normal I/O since it causes contention with the completion path if the user has chosen to try and split those paths on different CPUs (in this case abusing the CPUs and ignoring caching improves perf for some uses). Begins to remove the back_lock requirement for iscsi_get/put_task by removing the requirement for the get path. Instead of always holding the back_lock we detect if something has done the last put and is about to call iscsi_free_task(). A subsequent commit will then allow iSCSI code to do the last put on a task and only grab the back_lock if the refcount is now zero and it's going to call iscsi_free_task(). Link: https://lore.kernel.org/r/20220616224557.115234-8-michael.christie@oracle.com Reviewed-by: Lee Duncan <lduncan@suse.com> Signed-off-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-06-17 06:45:55 +08:00
restart_cmd_loop:
scsi: libiscsi: Fix iscsi_task use after free() The following bug was reported and debugged by wubo40@huawei.com: When testing kernel 4.18 version, NULL pointer dereference problem occurs in iscsi_eh_cmd_timed_out() function. I think this bug in the upstream is still exists. The analysis reasons are as follows: 1) For some reason, I/O command did not complete within the timeout period. The block layer timer works, call scsi_times_out() to handle I/O timeout logic. At the same time the command just completes. 2) scsi_times_out() call iscsi_eh_cmd_timed_out() to process timeout logic. Although there is an NULL judgment for the task, the task has not been released yet now. 3) iscsi_complete_task() calls __iscsi_put_task(). The task reference count reaches zero, the conditions for free task is met, then iscsi_free_task() frees the task, and sets sc->SCp.ptr = NULL. After iscsi_eh_cmd_timed_out() passes the task judgment check, there can still be NULL dereference scenarios. CPU0 CPU3 |- scsi_times_out() |- iscsi_complete_task() | | |- iscsi_eh_cmd_timed_out() |- __iscsi_put_task() | | |- task=sc->SCp.ptr, task is not NUL, check passed |- iscsi_free_task(task) | | | |-> sc->SCp.ptr = NULL | | |- task is NULL now, NULL pointer dereference | | | \|/ \|/ Calltrace: [380751.840862] BUG: unable to handle kernel NULL pointer dereference at 0000000000000138 [380751.843709] PGD 0 P4D 0 [380751.844770] Oops: 0000 [#1] SMP PTI [380751.846283] CPU: 0 PID: 403 Comm: kworker/0:1H Kdump: loaded Tainted: G [380751.851467] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996) [380751.856521] Workqueue: kblockd blk_mq_timeout_work [380751.858527] RIP: 0010:iscsi_eh_cmd_timed_out+0x15e/0x2e0 [libiscsi] [380751.861129] Code: 83 ea 01 48 8d 74 d0 08 48 8b 10 48 8b 4a 50 48 85 c9 74 2c 48 39 d5 74 [380751.868811] RSP: 0018:ffffc1e280a5fd58 EFLAGS: 00010246 [380751.870978] RAX: ffff9fd1e84e15e0 RBX: ffff9fd1e84e6dd0 RCX: 0000000116acc580 [380751.873791] RDX: ffff9fd1f97a9400 RSI: ffff9fd1e84e1800 RDI: ffff9fd1e4d6d420 [380751.876059] RBP: ffff9fd1e4d49000 R08: 0000000116acc580 R09: 0000000116acc580 [380751.878284] R10: 0000000000000000 R11: 0000000000000000 R12: ffff9fd1e6e931e8 [380751.880500] R13: ffff9fd1e84e6ee0 R14: 0000000000000010 R15: 0000000000000003 [380751.882687] FS: 0000000000000000(0000) GS:ffff9fd1fac00000(0000) knlGS:0000000000000000 [380751.885236] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [380751.887059] CR2: 0000000000000138 CR3: 000000011860a001 CR4: 00000000003606f0 [380751.889308] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [380751.891523] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [380751.893738] Call Trace: [380751.894639] scsi_times_out+0x60/0x1c0 [380751.895861] blk_mq_check_expired+0x144/0x200 [380751.897302] ? __switch_to_asm+0x35/0x70 [380751.898551] blk_mq_queue_tag_busy_iter+0x195/0x2e0 [380751.900091] ? __blk_mq_requeue_request+0x100/0x100 [380751.901611] ? __switch_to_asm+0x41/0x70 [380751.902853] ? __blk_mq_requeue_request+0x100/0x100 [380751.904398] blk_mq_timeout_work+0x54/0x130 [380751.905740] process_one_work+0x195/0x390 [380751.907228] worker_thread+0x30/0x390 [380751.908713] ? process_one_work+0x390/0x390 [380751.910350] kthread+0x10d/0x130 [380751.911470] ? kthread_flush_work_fn+0x10/0x10 [380751.913007] ret_from_fork+0x35/0x40 crash> dis -l iscsi_eh_cmd_timed_out+0x15e xxxxx/drivers/scsi/libiscsi.c: 2062 1970 enum blk_eh_timer_return iscsi_eh_cmd_timed_out(struct scsi_cmnd *sc) { ... 1984 spin_lock_bh(&session->frwd_lock); 1985 task = (struct iscsi_task *)sc->SCp.ptr; 1986 if (!task) { 1987 /* 1988 * Raced with completion. Blk layer has taken ownership 1989 * so let timeout code complete it now. 1990 */ 1991 rc = BLK_EH_DONE; 1992 goto done; 1993 } ... 2052 for (i = 0; i < conn->session->cmds_max; i++) { 2053 running_task = conn->session->cmds[i]; 2054 if (!running_task->sc || running_task == task || 2055 running_task->state != ISCSI_TASK_RUNNING) 2056 continue; 2057 2058 /* 2059 * Only check if cmds started before this one have made 2060 * progress, or this could never fail 2061 */ 2062 if (time_after(running_task->sc->jiffies_at_alloc, 2063 task->sc->jiffies_at_alloc)) <--- 2064 continue; 2065 ... } carsh> struct scsi_cmnd ffff9fd1e6e931e8 struct scsi_cmnd { ... SCp = { ptr = 0x0, <--- iscsi_task this_residual = 0, ... }, } To prevent this, we take a ref to the cmd under the back (completion) lock so if the completion side were to call iscsi_complete_task() on the task while the timer/eh paths are not holding the back_lock it will not be freed from under us. Note that this requires the previous patch, "scsi: libiscsi: Drop taskqueuelock" because bnx2i sleeps in its cleanup_task callout if the cmd is aborted. If the EH/timer and completion path are racing we don't know which path will do the last put. The previous patch moved the operations we needed to do under the forward lock to cleanup_queued_task. Once that has run we can drop the forward lock for the cmd and bnx2i no longer has to worry about if the EH, timer or completion path did the ast put and if the forward lock is held or not since it won't be. Link: https://lore.kernel.org/r/20210207044608.27585-4-michael.christie@oracle.com Reported-by: Wu Bo <wubo40@huawei.com> Reviewed-by: Lee Duncan <lduncan@suse.com> Signed-off-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-02-07 12:46:02 +08:00
spin_lock_bh(&session->back_lock);
for (i = 0; i < session->cmds_max; i++) {
task = session->cmds[i];
if (!task->sc || task->state == ISCSI_TASK_FREE)
continue;
if (lun != -1 && lun != task->sc->device->lun)
continue;
scsi: iscsi: Remove iscsi_get_task back_lock requirement We currently require that the back_lock is held when calling the functions that manipulate the iscsi_task refcount. The only reason for this is to handle races where we are handling SCSI-ml EH callbacks and the cmd is completing at the same time the normal completion path is running, and we can't return from the EH callback until the driver has stopped accessing the cmd. Holding the back_lock while also accessing the task->state made it simple to check that a cmd is completing and also get/put a refcount at the same time, and at the time we were not as concerned about performance. The problem is that we don't want to take the back_lock from the xmit path for normal I/O since it causes contention with the completion path if the user has chosen to try and split those paths on different CPUs (in this case abusing the CPUs and ignoring caching improves perf for some uses). Begins to remove the back_lock requirement for iscsi_get/put_task by removing the requirement for the get path. Instead of always holding the back_lock we detect if something has done the last put and is about to call iscsi_free_task(). A subsequent commit will then allow iSCSI code to do the last put on a task and only grab the back_lock if the refcount is now zero and it's going to call iscsi_free_task(). Link: https://lore.kernel.org/r/20220616224557.115234-8-michael.christie@oracle.com Reviewed-by: Lee Duncan <lduncan@suse.com> Signed-off-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-06-17 06:45:55 +08:00
/*
* The cmd is completing but if this is called from an eh
* callout path then when we return scsi-ml owns the cmd. Wait
* for the completion path to finish freeing the cmd.
*/
if (!iscsi_get_task(task)) {
spin_unlock_bh(&session->back_lock);
spin_unlock_bh(&session->frwd_lock);
udelay(ISCSI_CMD_COMPL_WAIT);
spin_lock_bh(&session->frwd_lock);
goto restart_cmd_loop;
}
scsi: libiscsi: Fix iscsi_task use after free() The following bug was reported and debugged by wubo40@huawei.com: When testing kernel 4.18 version, NULL pointer dereference problem occurs in iscsi_eh_cmd_timed_out() function. I think this bug in the upstream is still exists. The analysis reasons are as follows: 1) For some reason, I/O command did not complete within the timeout period. The block layer timer works, call scsi_times_out() to handle I/O timeout logic. At the same time the command just completes. 2) scsi_times_out() call iscsi_eh_cmd_timed_out() to process timeout logic. Although there is an NULL judgment for the task, the task has not been released yet now. 3) iscsi_complete_task() calls __iscsi_put_task(). The task reference count reaches zero, the conditions for free task is met, then iscsi_free_task() frees the task, and sets sc->SCp.ptr = NULL. After iscsi_eh_cmd_timed_out() passes the task judgment check, there can still be NULL dereference scenarios. CPU0 CPU3 |- scsi_times_out() |- iscsi_complete_task() | | |- iscsi_eh_cmd_timed_out() |- __iscsi_put_task() | | |- task=sc->SCp.ptr, task is not NUL, check passed |- iscsi_free_task(task) | | | |-> sc->SCp.ptr = NULL | | |- task is NULL now, NULL pointer dereference | | | \|/ \|/ Calltrace: [380751.840862] BUG: unable to handle kernel NULL pointer dereference at 0000000000000138 [380751.843709] PGD 0 P4D 0 [380751.844770] Oops: 0000 [#1] SMP PTI [380751.846283] CPU: 0 PID: 403 Comm: kworker/0:1H Kdump: loaded Tainted: G [380751.851467] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996) [380751.856521] Workqueue: kblockd blk_mq_timeout_work [380751.858527] RIP: 0010:iscsi_eh_cmd_timed_out+0x15e/0x2e0 [libiscsi] [380751.861129] Code: 83 ea 01 48 8d 74 d0 08 48 8b 10 48 8b 4a 50 48 85 c9 74 2c 48 39 d5 74 [380751.868811] RSP: 0018:ffffc1e280a5fd58 EFLAGS: 00010246 [380751.870978] RAX: ffff9fd1e84e15e0 RBX: ffff9fd1e84e6dd0 RCX: 0000000116acc580 [380751.873791] RDX: ffff9fd1f97a9400 RSI: ffff9fd1e84e1800 RDI: ffff9fd1e4d6d420 [380751.876059] RBP: ffff9fd1e4d49000 R08: 0000000116acc580 R09: 0000000116acc580 [380751.878284] R10: 0000000000000000 R11: 0000000000000000 R12: ffff9fd1e6e931e8 [380751.880500] R13: ffff9fd1e84e6ee0 R14: 0000000000000010 R15: 0000000000000003 [380751.882687] FS: 0000000000000000(0000) GS:ffff9fd1fac00000(0000) knlGS:0000000000000000 [380751.885236] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [380751.887059] CR2: 0000000000000138 CR3: 000000011860a001 CR4: 00000000003606f0 [380751.889308] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [380751.891523] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [380751.893738] Call Trace: [380751.894639] scsi_times_out+0x60/0x1c0 [380751.895861] blk_mq_check_expired+0x144/0x200 [380751.897302] ? __switch_to_asm+0x35/0x70 [380751.898551] blk_mq_queue_tag_busy_iter+0x195/0x2e0 [380751.900091] ? __blk_mq_requeue_request+0x100/0x100 [380751.901611] ? __switch_to_asm+0x41/0x70 [380751.902853] ? __blk_mq_requeue_request+0x100/0x100 [380751.904398] blk_mq_timeout_work+0x54/0x130 [380751.905740] process_one_work+0x195/0x390 [380751.907228] worker_thread+0x30/0x390 [380751.908713] ? process_one_work+0x390/0x390 [380751.910350] kthread+0x10d/0x130 [380751.911470] ? kthread_flush_work_fn+0x10/0x10 [380751.913007] ret_from_fork+0x35/0x40 crash> dis -l iscsi_eh_cmd_timed_out+0x15e xxxxx/drivers/scsi/libiscsi.c: 2062 1970 enum blk_eh_timer_return iscsi_eh_cmd_timed_out(struct scsi_cmnd *sc) { ... 1984 spin_lock_bh(&session->frwd_lock); 1985 task = (struct iscsi_task *)sc->SCp.ptr; 1986 if (!task) { 1987 /* 1988 * Raced with completion. Blk layer has taken ownership 1989 * so let timeout code complete it now. 1990 */ 1991 rc = BLK_EH_DONE; 1992 goto done; 1993 } ... 2052 for (i = 0; i < conn->session->cmds_max; i++) { 2053 running_task = conn->session->cmds[i]; 2054 if (!running_task->sc || running_task == task || 2055 running_task->state != ISCSI_TASK_RUNNING) 2056 continue; 2057 2058 /* 2059 * Only check if cmds started before this one have made 2060 * progress, or this could never fail 2061 */ 2062 if (time_after(running_task->sc->jiffies_at_alloc, 2063 task->sc->jiffies_at_alloc)) <--- 2064 continue; 2065 ... } carsh> struct scsi_cmnd ffff9fd1e6e931e8 struct scsi_cmnd { ... SCp = { ptr = 0x0, <--- iscsi_task this_residual = 0, ... }, } To prevent this, we take a ref to the cmd under the back (completion) lock so if the completion side were to call iscsi_complete_task() on the task while the timer/eh paths are not holding the back_lock it will not be freed from under us. Note that this requires the previous patch, "scsi: libiscsi: Drop taskqueuelock" because bnx2i sleeps in its cleanup_task callout if the cmd is aborted. If the EH/timer and completion path are racing we don't know which path will do the last put. The previous patch moved the operations we needed to do under the forward lock to cleanup_queued_task. Once that has run we can drop the forward lock for the cmd and bnx2i no longer has to worry about if the EH, timer or completion path did the ast put and if the forward lock is held or not since it won't be. Link: https://lore.kernel.org/r/20210207044608.27585-4-michael.christie@oracle.com Reported-by: Wu Bo <wubo40@huawei.com> Reviewed-by: Lee Duncan <lduncan@suse.com> Signed-off-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-02-07 12:46:02 +08:00
ISCSI_DBG_SESSION(session,
"failing sc %p itt 0x%x state %d\n",
task->sc, task->itt, task->state);
scsi: iscsi: Remove iscsi_get_task back_lock requirement We currently require that the back_lock is held when calling the functions that manipulate the iscsi_task refcount. The only reason for this is to handle races where we are handling SCSI-ml EH callbacks and the cmd is completing at the same time the normal completion path is running, and we can't return from the EH callback until the driver has stopped accessing the cmd. Holding the back_lock while also accessing the task->state made it simple to check that a cmd is completing and also get/put a refcount at the same time, and at the time we were not as concerned about performance. The problem is that we don't want to take the back_lock from the xmit path for normal I/O since it causes contention with the completion path if the user has chosen to try and split those paths on different CPUs (in this case abusing the CPUs and ignoring caching improves perf for some uses). Begins to remove the back_lock requirement for iscsi_get/put_task by removing the requirement for the get path. Instead of always holding the back_lock we detect if something has done the last put and is about to call iscsi_free_task(). A subsequent commit will then allow iSCSI code to do the last put on a task and only grab the back_lock if the refcount is now zero and it's going to call iscsi_free_task(). Link: https://lore.kernel.org/r/20220616224557.115234-8-michael.christie@oracle.com Reviewed-by: Lee Duncan <lduncan@suse.com> Signed-off-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-06-17 06:45:55 +08:00
__fail_scsi_task(task, error);
__iscsi_put_task(task);
}
scsi: libiscsi: Fix iscsi_task use after free() The following bug was reported and debugged by wubo40@huawei.com: When testing kernel 4.18 version, NULL pointer dereference problem occurs in iscsi_eh_cmd_timed_out() function. I think this bug in the upstream is still exists. The analysis reasons are as follows: 1) For some reason, I/O command did not complete within the timeout period. The block layer timer works, call scsi_times_out() to handle I/O timeout logic. At the same time the command just completes. 2) scsi_times_out() call iscsi_eh_cmd_timed_out() to process timeout logic. Although there is an NULL judgment for the task, the task has not been released yet now. 3) iscsi_complete_task() calls __iscsi_put_task(). The task reference count reaches zero, the conditions for free task is met, then iscsi_free_task() frees the task, and sets sc->SCp.ptr = NULL. After iscsi_eh_cmd_timed_out() passes the task judgment check, there can still be NULL dereference scenarios. CPU0 CPU3 |- scsi_times_out() |- iscsi_complete_task() | | |- iscsi_eh_cmd_timed_out() |- __iscsi_put_task() | | |- task=sc->SCp.ptr, task is not NUL, check passed |- iscsi_free_task(task) | | | |-> sc->SCp.ptr = NULL | | |- task is NULL now, NULL pointer dereference | | | \|/ \|/ Calltrace: [380751.840862] BUG: unable to handle kernel NULL pointer dereference at 0000000000000138 [380751.843709] PGD 0 P4D 0 [380751.844770] Oops: 0000 [#1] SMP PTI [380751.846283] CPU: 0 PID: 403 Comm: kworker/0:1H Kdump: loaded Tainted: G [380751.851467] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996) [380751.856521] Workqueue: kblockd blk_mq_timeout_work [380751.858527] RIP: 0010:iscsi_eh_cmd_timed_out+0x15e/0x2e0 [libiscsi] [380751.861129] Code: 83 ea 01 48 8d 74 d0 08 48 8b 10 48 8b 4a 50 48 85 c9 74 2c 48 39 d5 74 [380751.868811] RSP: 0018:ffffc1e280a5fd58 EFLAGS: 00010246 [380751.870978] RAX: ffff9fd1e84e15e0 RBX: ffff9fd1e84e6dd0 RCX: 0000000116acc580 [380751.873791] RDX: ffff9fd1f97a9400 RSI: ffff9fd1e84e1800 RDI: ffff9fd1e4d6d420 [380751.876059] RBP: ffff9fd1e4d49000 R08: 0000000116acc580 R09: 0000000116acc580 [380751.878284] R10: 0000000000000000 R11: 0000000000000000 R12: ffff9fd1e6e931e8 [380751.880500] R13: ffff9fd1e84e6ee0 R14: 0000000000000010 R15: 0000000000000003 [380751.882687] FS: 0000000000000000(0000) GS:ffff9fd1fac00000(0000) knlGS:0000000000000000 [380751.885236] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [380751.887059] CR2: 0000000000000138 CR3: 000000011860a001 CR4: 00000000003606f0 [380751.889308] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [380751.891523] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [380751.893738] Call Trace: [380751.894639] scsi_times_out+0x60/0x1c0 [380751.895861] blk_mq_check_expired+0x144/0x200 [380751.897302] ? __switch_to_asm+0x35/0x70 [380751.898551] blk_mq_queue_tag_busy_iter+0x195/0x2e0 [380751.900091] ? __blk_mq_requeue_request+0x100/0x100 [380751.901611] ? __switch_to_asm+0x41/0x70 [380751.902853] ? __blk_mq_requeue_request+0x100/0x100 [380751.904398] blk_mq_timeout_work+0x54/0x130 [380751.905740] process_one_work+0x195/0x390 [380751.907228] worker_thread+0x30/0x390 [380751.908713] ? process_one_work+0x390/0x390 [380751.910350] kthread+0x10d/0x130 [380751.911470] ? kthread_flush_work_fn+0x10/0x10 [380751.913007] ret_from_fork+0x35/0x40 crash> dis -l iscsi_eh_cmd_timed_out+0x15e xxxxx/drivers/scsi/libiscsi.c: 2062 1970 enum blk_eh_timer_return iscsi_eh_cmd_timed_out(struct scsi_cmnd *sc) { ... 1984 spin_lock_bh(&session->frwd_lock); 1985 task = (struct iscsi_task *)sc->SCp.ptr; 1986 if (!task) { 1987 /* 1988 * Raced with completion. Blk layer has taken ownership 1989 * so let timeout code complete it now. 1990 */ 1991 rc = BLK_EH_DONE; 1992 goto done; 1993 } ... 2052 for (i = 0; i < conn->session->cmds_max; i++) { 2053 running_task = conn->session->cmds[i]; 2054 if (!running_task->sc || running_task == task || 2055 running_task->state != ISCSI_TASK_RUNNING) 2056 continue; 2057 2058 /* 2059 * Only check if cmds started before this one have made 2060 * progress, or this could never fail 2061 */ 2062 if (time_after(running_task->sc->jiffies_at_alloc, 2063 task->sc->jiffies_at_alloc)) <--- 2064 continue; 2065 ... } carsh> struct scsi_cmnd ffff9fd1e6e931e8 struct scsi_cmnd { ... SCp = { ptr = 0x0, <--- iscsi_task this_residual = 0, ... }, } To prevent this, we take a ref to the cmd under the back (completion) lock so if the completion side were to call iscsi_complete_task() on the task while the timer/eh paths are not holding the back_lock it will not be freed from under us. Note that this requires the previous patch, "scsi: libiscsi: Drop taskqueuelock" because bnx2i sleeps in its cleanup_task callout if the cmd is aborted. If the EH/timer and completion path are racing we don't know which path will do the last put. The previous patch moved the operations we needed to do under the forward lock to cleanup_queued_task. Once that has run we can drop the forward lock for the cmd and bnx2i no longer has to worry about if the EH, timer or completion path did the ast put and if the forward lock is held or not since it won't be. Link: https://lore.kernel.org/r/20210207044608.27585-4-michael.christie@oracle.com Reported-by: Wu Bo <wubo40@huawei.com> Reviewed-by: Lee Duncan <lduncan@suse.com> Signed-off-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-02-07 12:46:02 +08:00
spin_unlock_bh(&session->back_lock);
}
/**
* iscsi_suspend_queue - suspend iscsi_queuecommand
* @conn: iscsi conn to stop queueing IO on
*
[SCSI] libiscsi: Reduce locking contention in fast path Replace the session lock with two locks, a forward lock and a backwards lock named frwd_lock and back_lock respectively. The forward lock protects resources that change while sending a request to the target, such as cmdsn, queued_cmdsn, and allocating task from the commands' pool with kfifo_out. The backward lock protects resources that change while processing a response or in error path, such as cmdsn_exp, cmdsn_max, and returning tasks to the commands' pool with kfifo_in. Under a steady state fast-path situation, that is when one or more processes/threads submit IO to an iscsi device and a single kernel upcall (e.g softirq) is dealing with processing of responses without errors, this patch eliminates the contention between the queuecommand()/request response/scsi_done() flows associated with iscsi sessions. Between the forward and the backward locks exists a strict locking hierarchy. The mutual exclusion zone protected by the forward lock can enclose the mutual exclusion zone protected by the backward lock but not vice versa. For example, in iscsi_conn_teardown or in iscsi_xmit_data when there is a failure and __iscsi_put_task is called, the backward lock is taken while the forward lock is still taken. On the other hand, if in the RX path a nop is to be sent, for example in iscsi_handle_reject or __iscsi_complete_pdu than the forward lock is released and the backward lock is taken for the duration of iscsi_send_nopout, later the backward lock is released and the forward lock is retaken. libiscsi_tcp uses two kernel fifos the r2t pool and the r2t queue. The insertion and deletion from these queues didn't corespond to the assumption taken by the new forward/backwards session locking paradigm. That is, in iscsi_tcp_clenup_task which belongs to the RX (backwards) path, r2t is taken out from r2t queue and inserted to the r2t pool. In iscsi_tcp_get_curr_r2t which belong to the TX (forward) path, r2t is also inserted to the r2t pool and another r2t is pulled from r2t queue. Only in iscsi_tcp_r2t_rsp which is called in the RX path but can requeue to the TX path, r2t is taken from the r2t pool and inserted to the r2t queue. In order to cope with this situation, two spin locks were added, pool2queue and queue2pool. The former protects extracting from the r2t pool and inserting to the r2t queue, and the later protects the extracing from the r2t queue and inserting to the r2t pool. Signed-off-by: Shlomo Pongratz <shlomop@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> [minor fix up to apply cleanly and compile fix] Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2014-02-07 14:41:38 +08:00
* This grabs the session frwd_lock to make sure no one is in
* xmit_task/queuecommand, and then sets suspend to prevent
* new commands from being queued. This only needs to be called
* by offload drivers that need to sync a path like ep disconnect
* with the iscsi_queuecommand/xmit_task. To start IO again libiscsi
* will call iscsi_start_tx and iscsi_unblock_session when in FFP.
*/
void iscsi_suspend_queue(struct iscsi_conn *conn)
{
[SCSI] libiscsi: Reduce locking contention in fast path Replace the session lock with two locks, a forward lock and a backwards lock named frwd_lock and back_lock respectively. The forward lock protects resources that change while sending a request to the target, such as cmdsn, queued_cmdsn, and allocating task from the commands' pool with kfifo_out. The backward lock protects resources that change while processing a response or in error path, such as cmdsn_exp, cmdsn_max, and returning tasks to the commands' pool with kfifo_in. Under a steady state fast-path situation, that is when one or more processes/threads submit IO to an iscsi device and a single kernel upcall (e.g softirq) is dealing with processing of responses without errors, this patch eliminates the contention between the queuecommand()/request response/scsi_done() flows associated with iscsi sessions. Between the forward and the backward locks exists a strict locking hierarchy. The mutual exclusion zone protected by the forward lock can enclose the mutual exclusion zone protected by the backward lock but not vice versa. For example, in iscsi_conn_teardown or in iscsi_xmit_data when there is a failure and __iscsi_put_task is called, the backward lock is taken while the forward lock is still taken. On the other hand, if in the RX path a nop is to be sent, for example in iscsi_handle_reject or __iscsi_complete_pdu than the forward lock is released and the backward lock is taken for the duration of iscsi_send_nopout, later the backward lock is released and the forward lock is retaken. libiscsi_tcp uses two kernel fifos the r2t pool and the r2t queue. The insertion and deletion from these queues didn't corespond to the assumption taken by the new forward/backwards session locking paradigm. That is, in iscsi_tcp_clenup_task which belongs to the RX (backwards) path, r2t is taken out from r2t queue and inserted to the r2t pool. In iscsi_tcp_get_curr_r2t which belong to the TX (forward) path, r2t is also inserted to the r2t pool and another r2t is pulled from r2t queue. Only in iscsi_tcp_r2t_rsp which is called in the RX path but can requeue to the TX path, r2t is taken from the r2t pool and inserted to the r2t queue. In order to cope with this situation, two spin locks were added, pool2queue and queue2pool. The former protects extracting from the r2t pool and inserting to the r2t queue, and the later protects the extracing from the r2t queue and inserting to the r2t pool. Signed-off-by: Shlomo Pongratz <shlomop@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> [minor fix up to apply cleanly and compile fix] Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2014-02-07 14:41:38 +08:00
spin_lock_bh(&conn->session->frwd_lock);
set_bit(ISCSI_CONN_FLAG_SUSPEND_TX, &conn->flags);
[SCSI] libiscsi: Reduce locking contention in fast path Replace the session lock with two locks, a forward lock and a backwards lock named frwd_lock and back_lock respectively. The forward lock protects resources that change while sending a request to the target, such as cmdsn, queued_cmdsn, and allocating task from the commands' pool with kfifo_out. The backward lock protects resources that change while processing a response or in error path, such as cmdsn_exp, cmdsn_max, and returning tasks to the commands' pool with kfifo_in. Under a steady state fast-path situation, that is when one or more processes/threads submit IO to an iscsi device and a single kernel upcall (e.g softirq) is dealing with processing of responses without errors, this patch eliminates the contention between the queuecommand()/request response/scsi_done() flows associated with iscsi sessions. Between the forward and the backward locks exists a strict locking hierarchy. The mutual exclusion zone protected by the forward lock can enclose the mutual exclusion zone protected by the backward lock but not vice versa. For example, in iscsi_conn_teardown or in iscsi_xmit_data when there is a failure and __iscsi_put_task is called, the backward lock is taken while the forward lock is still taken. On the other hand, if in the RX path a nop is to be sent, for example in iscsi_handle_reject or __iscsi_complete_pdu than the forward lock is released and the backward lock is taken for the duration of iscsi_send_nopout, later the backward lock is released and the forward lock is retaken. libiscsi_tcp uses two kernel fifos the r2t pool and the r2t queue. The insertion and deletion from these queues didn't corespond to the assumption taken by the new forward/backwards session locking paradigm. That is, in iscsi_tcp_clenup_task which belongs to the RX (backwards) path, r2t is taken out from r2t queue and inserted to the r2t pool. In iscsi_tcp_get_curr_r2t which belong to the TX (forward) path, r2t is also inserted to the r2t pool and another r2t is pulled from r2t queue. Only in iscsi_tcp_r2t_rsp which is called in the RX path but can requeue to the TX path, r2t is taken from the r2t pool and inserted to the r2t queue. In order to cope with this situation, two spin locks were added, pool2queue and queue2pool. The former protects extracting from the r2t pool and inserting to the r2t queue, and the later protects the extracing from the r2t queue and inserting to the r2t pool. Signed-off-by: Shlomo Pongratz <shlomop@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> [minor fix up to apply cleanly and compile fix] Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2014-02-07 14:41:38 +08:00
spin_unlock_bh(&conn->session->frwd_lock);
}
EXPORT_SYMBOL_GPL(iscsi_suspend_queue);
/**
* iscsi_suspend_tx - suspend iscsi_data_xmit
* @conn: iscsi conn to stop processing IO on.
*
* This function sets the suspend bit to prevent iscsi_data_xmit
* from sending new IO, and if work is queued on the xmit thread
* it will wait for it to be completed.
*/
void iscsi_suspend_tx(struct iscsi_conn *conn)
{
struct Scsi_Host *shost = conn->session->host;
struct iscsi_host *ihost = shost_priv(shost);
set_bit(ISCSI_CONN_FLAG_SUSPEND_TX, &conn->flags);
if (ihost->workq)
flush_work(&conn->xmitwork);
}
EXPORT_SYMBOL_GPL(iscsi_suspend_tx);
static void iscsi_start_tx(struct iscsi_conn *conn)
{
clear_bit(ISCSI_CONN_FLAG_SUSPEND_TX, &conn->flags);
iscsi_conn_queue_xmit(conn);
}
/**
* iscsi_suspend_rx - Prevent recvwork from running again.
* @conn: iscsi conn to stop.
*/
void iscsi_suspend_rx(struct iscsi_conn *conn)
{
struct Scsi_Host *shost = conn->session->host;
struct iscsi_host *ihost = shost_priv(shost);
set_bit(ISCSI_CONN_FLAG_SUSPEND_RX, &conn->flags);
if (ihost->workq)
flush_work(&conn->recvwork);
}
EXPORT_SYMBOL_GPL(iscsi_suspend_rx);
/*
* We want to make sure a ping is in flight. It has timed out.
* And we are not busy processing a pdu that is making
* progress but got started before the ping and is taking a while
* to complete so the ping is just stuck behind it in a queue.
*/
static int iscsi_has_ping_timed_out(struct iscsi_conn *conn)
{
if (READ_ONCE(conn->ping_task) &&
time_before_eq(conn->last_recv + (conn->recv_timeout * HZ) +
(conn->ping_timeout * HZ), jiffies))
return 1;
else
return 0;
}
enum blk_eh_timer_return iscsi_eh_cmd_timed_out(struct scsi_cmnd *sc)
{
enum blk_eh_timer_return rc = BLK_EH_DONE;
struct iscsi_task *task = NULL, *running_task;
struct iscsi_cls_session *cls_session;
struct iscsi_session *session;
struct iscsi_conn *conn;
int i;
cls_session = starget_to_session(scsi_target(sc->device));
session = cls_session->dd_data;
ISCSI_DBG_EH(session, "scsi cmd %p timedout\n", sc);
scsi: iscsi: Fix a potential deadlock in the timeout handler Some time ago the block layer was modified such that timeout handlers are called from thread context instead of interrupt context. Make it safe to run the iSCSI timeout handler in thread context. This patch fixes the following lockdep complaint: ================================ WARNING: inconsistent lock state 5.5.1-dbg+ #11 Not tainted -------------------------------- inconsistent {IN-SOFTIRQ-W} -> {SOFTIRQ-ON-W} usage. kworker/7:1H/206 [HC0[0]:SC0[0]:HE1:SE1] takes: ffff88802d9827e8 (&(&session->frwd_lock)->rlock){+.?.}, at: iscsi_eh_cmd_timed_out+0xa6/0x6d0 [libiscsi] {IN-SOFTIRQ-W} state was registered at: lock_acquire+0x106/0x240 _raw_spin_lock+0x38/0x50 iscsi_check_transport_timeouts+0x3e/0x210 [libiscsi] call_timer_fn+0x132/0x470 __run_timers.part.0+0x39f/0x5b0 run_timer_softirq+0x63/0xc0 __do_softirq+0x12d/0x5fd irq_exit+0xb3/0x110 smp_apic_timer_interrupt+0x131/0x3d0 apic_timer_interrupt+0xf/0x20 default_idle+0x31/0x230 arch_cpu_idle+0x13/0x20 default_idle_call+0x53/0x60 do_idle+0x38a/0x3f0 cpu_startup_entry+0x24/0x30 start_secondary+0x222/0x290 secondary_startup_64+0xa4/0xb0 irq event stamp: 1383705 hardirqs last enabled at (1383705): [<ffffffff81aace5c>] _raw_spin_unlock_irq+0x2c/0x50 hardirqs last disabled at (1383704): [<ffffffff81aacb98>] _raw_spin_lock_irq+0x18/0x50 softirqs last enabled at (1383690): [<ffffffffa0e2efea>] iscsi_queuecommand+0x76a/0xa20 [libiscsi] softirqs last disabled at (1383682): [<ffffffffa0e2e998>] iscsi_queuecommand+0x118/0xa20 [libiscsi] other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(&(&session->frwd_lock)->rlock); <Interrupt> lock(&(&session->frwd_lock)->rlock); *** DEADLOCK *** 2 locks held by kworker/7:1H/206: #0: ffff8880d57bf928 ((wq_completion)kblockd){+.+.}, at: process_one_work+0x472/0xab0 #1: ffff88802b9c7de8 ((work_completion)(&q->timeout_work)){+.+.}, at: process_one_work+0x476/0xab0 stack backtrace: CPU: 7 PID: 206 Comm: kworker/7:1H Not tainted 5.5.1-dbg+ #11 Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011 Workqueue: kblockd blk_mq_timeout_work Call Trace: dump_stack+0xa5/0xe6 print_usage_bug.cold+0x232/0x23b mark_lock+0x8dc/0xa70 __lock_acquire+0xcea/0x2af0 lock_acquire+0x106/0x240 _raw_spin_lock+0x38/0x50 iscsi_eh_cmd_timed_out+0xa6/0x6d0 [libiscsi] scsi_times_out+0xf4/0x440 [scsi_mod] scsi_timeout+0x1d/0x20 [scsi_mod] blk_mq_check_expired+0x365/0x3a0 bt_iter+0xd6/0xf0 blk_mq_queue_tag_busy_iter+0x3de/0x650 blk_mq_timeout_work+0x1af/0x380 process_one_work+0x56d/0xab0 worker_thread+0x7a/0x5d0 kthread+0x1bc/0x210 ret_from_fork+0x24/0x30 Fixes: 287922eb0b18 ("block: defer timeouts to a workqueue") Cc: Christoph Hellwig <hch@lst.de> Cc: Keith Busch <keith.busch@intel.com> Cc: Lee Duncan <lduncan@suse.com> Cc: Chris Leech <cleech@redhat.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20191209173457.187370-1-bvanassche@acm.org Signed-off-by: Bart Van Assche <bvanassche@acm.org> Reviewed-by: Lee Duncan <lduncan@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-12-10 01:34:57 +08:00
spin_lock_bh(&session->frwd_lock);
scsi: libiscsi: Fix iscsi_task use after free() The following bug was reported and debugged by wubo40@huawei.com: When testing kernel 4.18 version, NULL pointer dereference problem occurs in iscsi_eh_cmd_timed_out() function. I think this bug in the upstream is still exists. The analysis reasons are as follows: 1) For some reason, I/O command did not complete within the timeout period. The block layer timer works, call scsi_times_out() to handle I/O timeout logic. At the same time the command just completes. 2) scsi_times_out() call iscsi_eh_cmd_timed_out() to process timeout logic. Although there is an NULL judgment for the task, the task has not been released yet now. 3) iscsi_complete_task() calls __iscsi_put_task(). The task reference count reaches zero, the conditions for free task is met, then iscsi_free_task() frees the task, and sets sc->SCp.ptr = NULL. After iscsi_eh_cmd_timed_out() passes the task judgment check, there can still be NULL dereference scenarios. CPU0 CPU3 |- scsi_times_out() |- iscsi_complete_task() | | |- iscsi_eh_cmd_timed_out() |- __iscsi_put_task() | | |- task=sc->SCp.ptr, task is not NUL, check passed |- iscsi_free_task(task) | | | |-> sc->SCp.ptr = NULL | | |- task is NULL now, NULL pointer dereference | | | \|/ \|/ Calltrace: [380751.840862] BUG: unable to handle kernel NULL pointer dereference at 0000000000000138 [380751.843709] PGD 0 P4D 0 [380751.844770] Oops: 0000 [#1] SMP PTI [380751.846283] CPU: 0 PID: 403 Comm: kworker/0:1H Kdump: loaded Tainted: G [380751.851467] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996) [380751.856521] Workqueue: kblockd blk_mq_timeout_work [380751.858527] RIP: 0010:iscsi_eh_cmd_timed_out+0x15e/0x2e0 [libiscsi] [380751.861129] Code: 83 ea 01 48 8d 74 d0 08 48 8b 10 48 8b 4a 50 48 85 c9 74 2c 48 39 d5 74 [380751.868811] RSP: 0018:ffffc1e280a5fd58 EFLAGS: 00010246 [380751.870978] RAX: ffff9fd1e84e15e0 RBX: ffff9fd1e84e6dd0 RCX: 0000000116acc580 [380751.873791] RDX: ffff9fd1f97a9400 RSI: ffff9fd1e84e1800 RDI: ffff9fd1e4d6d420 [380751.876059] RBP: ffff9fd1e4d49000 R08: 0000000116acc580 R09: 0000000116acc580 [380751.878284] R10: 0000000000000000 R11: 0000000000000000 R12: ffff9fd1e6e931e8 [380751.880500] R13: ffff9fd1e84e6ee0 R14: 0000000000000010 R15: 0000000000000003 [380751.882687] FS: 0000000000000000(0000) GS:ffff9fd1fac00000(0000) knlGS:0000000000000000 [380751.885236] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [380751.887059] CR2: 0000000000000138 CR3: 000000011860a001 CR4: 00000000003606f0 [380751.889308] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [380751.891523] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [380751.893738] Call Trace: [380751.894639] scsi_times_out+0x60/0x1c0 [380751.895861] blk_mq_check_expired+0x144/0x200 [380751.897302] ? __switch_to_asm+0x35/0x70 [380751.898551] blk_mq_queue_tag_busy_iter+0x195/0x2e0 [380751.900091] ? __blk_mq_requeue_request+0x100/0x100 [380751.901611] ? __switch_to_asm+0x41/0x70 [380751.902853] ? __blk_mq_requeue_request+0x100/0x100 [380751.904398] blk_mq_timeout_work+0x54/0x130 [380751.905740] process_one_work+0x195/0x390 [380751.907228] worker_thread+0x30/0x390 [380751.908713] ? process_one_work+0x390/0x390 [380751.910350] kthread+0x10d/0x130 [380751.911470] ? kthread_flush_work_fn+0x10/0x10 [380751.913007] ret_from_fork+0x35/0x40 crash> dis -l iscsi_eh_cmd_timed_out+0x15e xxxxx/drivers/scsi/libiscsi.c: 2062 1970 enum blk_eh_timer_return iscsi_eh_cmd_timed_out(struct scsi_cmnd *sc) { ... 1984 spin_lock_bh(&session->frwd_lock); 1985 task = (struct iscsi_task *)sc->SCp.ptr; 1986 if (!task) { 1987 /* 1988 * Raced with completion. Blk layer has taken ownership 1989 * so let timeout code complete it now. 1990 */ 1991 rc = BLK_EH_DONE; 1992 goto done; 1993 } ... 2052 for (i = 0; i < conn->session->cmds_max; i++) { 2053 running_task = conn->session->cmds[i]; 2054 if (!running_task->sc || running_task == task || 2055 running_task->state != ISCSI_TASK_RUNNING) 2056 continue; 2057 2058 /* 2059 * Only check if cmds started before this one have made 2060 * progress, or this could never fail 2061 */ 2062 if (time_after(running_task->sc->jiffies_at_alloc, 2063 task->sc->jiffies_at_alloc)) <--- 2064 continue; 2065 ... } carsh> struct scsi_cmnd ffff9fd1e6e931e8 struct scsi_cmnd { ... SCp = { ptr = 0x0, <--- iscsi_task this_residual = 0, ... }, } To prevent this, we take a ref to the cmd under the back (completion) lock so if the completion side were to call iscsi_complete_task() on the task while the timer/eh paths are not holding the back_lock it will not be freed from under us. Note that this requires the previous patch, "scsi: libiscsi: Drop taskqueuelock" because bnx2i sleeps in its cleanup_task callout if the cmd is aborted. If the EH/timer and completion path are racing we don't know which path will do the last put. The previous patch moved the operations we needed to do under the forward lock to cleanup_queued_task. Once that has run we can drop the forward lock for the cmd and bnx2i no longer has to worry about if the EH, timer or completion path did the ast put and if the forward lock is held or not since it won't be. Link: https://lore.kernel.org/r/20210207044608.27585-4-michael.christie@oracle.com Reported-by: Wu Bo <wubo40@huawei.com> Reviewed-by: Lee Duncan <lduncan@suse.com> Signed-off-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-02-07 12:46:02 +08:00
spin_lock(&session->back_lock);
task = iscsi_cmd(sc)->task;
if (!task) {
/*
* Raced with completion. Blk layer has taken ownership
* so let timeout code complete it now.
*/
rc = BLK_EH_DONE;
scsi: libiscsi: Fix iscsi_task use after free() The following bug was reported and debugged by wubo40@huawei.com: When testing kernel 4.18 version, NULL pointer dereference problem occurs in iscsi_eh_cmd_timed_out() function. I think this bug in the upstream is still exists. The analysis reasons are as follows: 1) For some reason, I/O command did not complete within the timeout period. The block layer timer works, call scsi_times_out() to handle I/O timeout logic. At the same time the command just completes. 2) scsi_times_out() call iscsi_eh_cmd_timed_out() to process timeout logic. Although there is an NULL judgment for the task, the task has not been released yet now. 3) iscsi_complete_task() calls __iscsi_put_task(). The task reference count reaches zero, the conditions for free task is met, then iscsi_free_task() frees the task, and sets sc->SCp.ptr = NULL. After iscsi_eh_cmd_timed_out() passes the task judgment check, there can still be NULL dereference scenarios. CPU0 CPU3 |- scsi_times_out() |- iscsi_complete_task() | | |- iscsi_eh_cmd_timed_out() |- __iscsi_put_task() | | |- task=sc->SCp.ptr, task is not NUL, check passed |- iscsi_free_task(task) | | | |-> sc->SCp.ptr = NULL | | |- task is NULL now, NULL pointer dereference | | | \|/ \|/ Calltrace: [380751.840862] BUG: unable to handle kernel NULL pointer dereference at 0000000000000138 [380751.843709] PGD 0 P4D 0 [380751.844770] Oops: 0000 [#1] SMP PTI [380751.846283] CPU: 0 PID: 403 Comm: kworker/0:1H Kdump: loaded Tainted: G [380751.851467] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996) [380751.856521] Workqueue: kblockd blk_mq_timeout_work [380751.858527] RIP: 0010:iscsi_eh_cmd_timed_out+0x15e/0x2e0 [libiscsi] [380751.861129] Code: 83 ea 01 48 8d 74 d0 08 48 8b 10 48 8b 4a 50 48 85 c9 74 2c 48 39 d5 74 [380751.868811] RSP: 0018:ffffc1e280a5fd58 EFLAGS: 00010246 [380751.870978] RAX: ffff9fd1e84e15e0 RBX: ffff9fd1e84e6dd0 RCX: 0000000116acc580 [380751.873791] RDX: ffff9fd1f97a9400 RSI: ffff9fd1e84e1800 RDI: ffff9fd1e4d6d420 [380751.876059] RBP: ffff9fd1e4d49000 R08: 0000000116acc580 R09: 0000000116acc580 [380751.878284] R10: 0000000000000000 R11: 0000000000000000 R12: ffff9fd1e6e931e8 [380751.880500] R13: ffff9fd1e84e6ee0 R14: 0000000000000010 R15: 0000000000000003 [380751.882687] FS: 0000000000000000(0000) GS:ffff9fd1fac00000(0000) knlGS:0000000000000000 [380751.885236] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [380751.887059] CR2: 0000000000000138 CR3: 000000011860a001 CR4: 00000000003606f0 [380751.889308] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [380751.891523] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [380751.893738] Call Trace: [380751.894639] scsi_times_out+0x60/0x1c0 [380751.895861] blk_mq_check_expired+0x144/0x200 [380751.897302] ? __switch_to_asm+0x35/0x70 [380751.898551] blk_mq_queue_tag_busy_iter+0x195/0x2e0 [380751.900091] ? __blk_mq_requeue_request+0x100/0x100 [380751.901611] ? __switch_to_asm+0x41/0x70 [380751.902853] ? __blk_mq_requeue_request+0x100/0x100 [380751.904398] blk_mq_timeout_work+0x54/0x130 [380751.905740] process_one_work+0x195/0x390 [380751.907228] worker_thread+0x30/0x390 [380751.908713] ? process_one_work+0x390/0x390 [380751.910350] kthread+0x10d/0x130 [380751.911470] ? kthread_flush_work_fn+0x10/0x10 [380751.913007] ret_from_fork+0x35/0x40 crash> dis -l iscsi_eh_cmd_timed_out+0x15e xxxxx/drivers/scsi/libiscsi.c: 2062 1970 enum blk_eh_timer_return iscsi_eh_cmd_timed_out(struct scsi_cmnd *sc) { ... 1984 spin_lock_bh(&session->frwd_lock); 1985 task = (struct iscsi_task *)sc->SCp.ptr; 1986 if (!task) { 1987 /* 1988 * Raced with completion. Blk layer has taken ownership 1989 * so let timeout code complete it now. 1990 */ 1991 rc = BLK_EH_DONE; 1992 goto done; 1993 } ... 2052 for (i = 0; i < conn->session->cmds_max; i++) { 2053 running_task = conn->session->cmds[i]; 2054 if (!running_task->sc || running_task == task || 2055 running_task->state != ISCSI_TASK_RUNNING) 2056 continue; 2057 2058 /* 2059 * Only check if cmds started before this one have made 2060 * progress, or this could never fail 2061 */ 2062 if (time_after(running_task->sc->jiffies_at_alloc, 2063 task->sc->jiffies_at_alloc)) <--- 2064 continue; 2065 ... } carsh> struct scsi_cmnd ffff9fd1e6e931e8 struct scsi_cmnd { ... SCp = { ptr = 0x0, <--- iscsi_task this_residual = 0, ... }, } To prevent this, we take a ref to the cmd under the back (completion) lock so if the completion side were to call iscsi_complete_task() on the task while the timer/eh paths are not holding the back_lock it will not be freed from under us. Note that this requires the previous patch, "scsi: libiscsi: Drop taskqueuelock" because bnx2i sleeps in its cleanup_task callout if the cmd is aborted. If the EH/timer and completion path are racing we don't know which path will do the last put. The previous patch moved the operations we needed to do under the forward lock to cleanup_queued_task. Once that has run we can drop the forward lock for the cmd and bnx2i no longer has to worry about if the EH, timer or completion path did the ast put and if the forward lock is held or not since it won't be. Link: https://lore.kernel.org/r/20210207044608.27585-4-michael.christie@oracle.com Reported-by: Wu Bo <wubo40@huawei.com> Reviewed-by: Lee Duncan <lduncan@suse.com> Signed-off-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-02-07 12:46:02 +08:00
spin_unlock(&session->back_lock);
goto done;
}
scsi: iscsi: Remove iscsi_get_task back_lock requirement We currently require that the back_lock is held when calling the functions that manipulate the iscsi_task refcount. The only reason for this is to handle races where we are handling SCSI-ml EH callbacks and the cmd is completing at the same time the normal completion path is running, and we can't return from the EH callback until the driver has stopped accessing the cmd. Holding the back_lock while also accessing the task->state made it simple to check that a cmd is completing and also get/put a refcount at the same time, and at the time we were not as concerned about performance. The problem is that we don't want to take the back_lock from the xmit path for normal I/O since it causes contention with the completion path if the user has chosen to try and split those paths on different CPUs (in this case abusing the CPUs and ignoring caching improves perf for some uses). Begins to remove the back_lock requirement for iscsi_get/put_task by removing the requirement for the get path. Instead of always holding the back_lock we detect if something has done the last put and is about to call iscsi_free_task(). A subsequent commit will then allow iSCSI code to do the last put on a task and only grab the back_lock if the refcount is now zero and it's going to call iscsi_free_task(). Link: https://lore.kernel.org/r/20220616224557.115234-8-michael.christie@oracle.com Reviewed-by: Lee Duncan <lduncan@suse.com> Signed-off-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-06-17 06:45:55 +08:00
if (!iscsi_get_task(task)) {
/*
* Racing with the completion path right now, so give it more
* time so that path can complete it like normal.
*/
rc = BLK_EH_RESET_TIMER;
task = NULL;
spin_unlock(&session->back_lock);
goto done;
}
scsi: libiscsi: Fix iscsi_task use after free() The following bug was reported and debugged by wubo40@huawei.com: When testing kernel 4.18 version, NULL pointer dereference problem occurs in iscsi_eh_cmd_timed_out() function. I think this bug in the upstream is still exists. The analysis reasons are as follows: 1) For some reason, I/O command did not complete within the timeout period. The block layer timer works, call scsi_times_out() to handle I/O timeout logic. At the same time the command just completes. 2) scsi_times_out() call iscsi_eh_cmd_timed_out() to process timeout logic. Although there is an NULL judgment for the task, the task has not been released yet now. 3) iscsi_complete_task() calls __iscsi_put_task(). The task reference count reaches zero, the conditions for free task is met, then iscsi_free_task() frees the task, and sets sc->SCp.ptr = NULL. After iscsi_eh_cmd_timed_out() passes the task judgment check, there can still be NULL dereference scenarios. CPU0 CPU3 |- scsi_times_out() |- iscsi_complete_task() | | |- iscsi_eh_cmd_timed_out() |- __iscsi_put_task() | | |- task=sc->SCp.ptr, task is not NUL, check passed |- iscsi_free_task(task) | | | |-> sc->SCp.ptr = NULL | | |- task is NULL now, NULL pointer dereference | | | \|/ \|/ Calltrace: [380751.840862] BUG: unable to handle kernel NULL pointer dereference at 0000000000000138 [380751.843709] PGD 0 P4D 0 [380751.844770] Oops: 0000 [#1] SMP PTI [380751.846283] CPU: 0 PID: 403 Comm: kworker/0:1H Kdump: loaded Tainted: G [380751.851467] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996) [380751.856521] Workqueue: kblockd blk_mq_timeout_work [380751.858527] RIP: 0010:iscsi_eh_cmd_timed_out+0x15e/0x2e0 [libiscsi] [380751.861129] Code: 83 ea 01 48 8d 74 d0 08 48 8b 10 48 8b 4a 50 48 85 c9 74 2c 48 39 d5 74 [380751.868811] RSP: 0018:ffffc1e280a5fd58 EFLAGS: 00010246 [380751.870978] RAX: ffff9fd1e84e15e0 RBX: ffff9fd1e84e6dd0 RCX: 0000000116acc580 [380751.873791] RDX: ffff9fd1f97a9400 RSI: ffff9fd1e84e1800 RDI: ffff9fd1e4d6d420 [380751.876059] RBP: ffff9fd1e4d49000 R08: 0000000116acc580 R09: 0000000116acc580 [380751.878284] R10: 0000000000000000 R11: 0000000000000000 R12: ffff9fd1e6e931e8 [380751.880500] R13: ffff9fd1e84e6ee0 R14: 0000000000000010 R15: 0000000000000003 [380751.882687] FS: 0000000000000000(0000) GS:ffff9fd1fac00000(0000) knlGS:0000000000000000 [380751.885236] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [380751.887059] CR2: 0000000000000138 CR3: 000000011860a001 CR4: 00000000003606f0 [380751.889308] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [380751.891523] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [380751.893738] Call Trace: [380751.894639] scsi_times_out+0x60/0x1c0 [380751.895861] blk_mq_check_expired+0x144/0x200 [380751.897302] ? __switch_to_asm+0x35/0x70 [380751.898551] blk_mq_queue_tag_busy_iter+0x195/0x2e0 [380751.900091] ? __blk_mq_requeue_request+0x100/0x100 [380751.901611] ? __switch_to_asm+0x41/0x70 [380751.902853] ? __blk_mq_requeue_request+0x100/0x100 [380751.904398] blk_mq_timeout_work+0x54/0x130 [380751.905740] process_one_work+0x195/0x390 [380751.907228] worker_thread+0x30/0x390 [380751.908713] ? process_one_work+0x390/0x390 [380751.910350] kthread+0x10d/0x130 [380751.911470] ? kthread_flush_work_fn+0x10/0x10 [380751.913007] ret_from_fork+0x35/0x40 crash> dis -l iscsi_eh_cmd_timed_out+0x15e xxxxx/drivers/scsi/libiscsi.c: 2062 1970 enum blk_eh_timer_return iscsi_eh_cmd_timed_out(struct scsi_cmnd *sc) { ... 1984 spin_lock_bh(&session->frwd_lock); 1985 task = (struct iscsi_task *)sc->SCp.ptr; 1986 if (!task) { 1987 /* 1988 * Raced with completion. Blk layer has taken ownership 1989 * so let timeout code complete it now. 1990 */ 1991 rc = BLK_EH_DONE; 1992 goto done; 1993 } ... 2052 for (i = 0; i < conn->session->cmds_max; i++) { 2053 running_task = conn->session->cmds[i]; 2054 if (!running_task->sc || running_task == task || 2055 running_task->state != ISCSI_TASK_RUNNING) 2056 continue; 2057 2058 /* 2059 * Only check if cmds started before this one have made 2060 * progress, or this could never fail 2061 */ 2062 if (time_after(running_task->sc->jiffies_at_alloc, 2063 task->sc->jiffies_at_alloc)) <--- 2064 continue; 2065 ... } carsh> struct scsi_cmnd ffff9fd1e6e931e8 struct scsi_cmnd { ... SCp = { ptr = 0x0, <--- iscsi_task this_residual = 0, ... }, } To prevent this, we take a ref to the cmd under the back (completion) lock so if the completion side were to call iscsi_complete_task() on the task while the timer/eh paths are not holding the back_lock it will not be freed from under us. Note that this requires the previous patch, "scsi: libiscsi: Drop taskqueuelock" because bnx2i sleeps in its cleanup_task callout if the cmd is aborted. If the EH/timer and completion path are racing we don't know which path will do the last put. The previous patch moved the operations we needed to do under the forward lock to cleanup_queued_task. Once that has run we can drop the forward lock for the cmd and bnx2i no longer has to worry about if the EH, timer or completion path did the ast put and if the forward lock is held or not since it won't be. Link: https://lore.kernel.org/r/20210207044608.27585-4-michael.christie@oracle.com Reported-by: Wu Bo <wubo40@huawei.com> Reviewed-by: Lee Duncan <lduncan@suse.com> Signed-off-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-02-07 12:46:02 +08:00
spin_unlock(&session->back_lock);
if (session->state != ISCSI_STATE_LOGGED_IN) {
scsi: libiscsi: Allow sd_shutdown on bad transport If, for any reason, userland shuts down iscsi transport interfaces before proper logouts - like when logging in to LUNs manually, without logging out on server shutdown, or when automated scripts can't umount/logout from logged LUNs - kernel will hang forever on its sd_sync_cache() logic, after issuing the SYNCHRONIZE_CACHE cmd to all still existent paths. PID: 1 TASK: ffff8801a69b8000 CPU: 1 COMMAND: "systemd-shutdow" #0 [ffff8801a69c3a30] __schedule at ffffffff8183e9ee #1 [ffff8801a69c3a80] schedule at ffffffff8183f0d5 #2 [ffff8801a69c3a98] schedule_timeout at ffffffff81842199 #3 [ffff8801a69c3b40] io_schedule_timeout at ffffffff8183e604 #4 [ffff8801a69c3b70] wait_for_completion_io_timeout at ffffffff8183fc6c #5 [ffff8801a69c3bd0] blk_execute_rq at ffffffff813cfe10 #6 [ffff8801a69c3c88] scsi_execute at ffffffff815c3fc7 #7 [ffff8801a69c3cc8] scsi_execute_req_flags at ffffffff815c60fe #8 [ffff8801a69c3d30] sd_sync_cache at ffffffff815d37d7 #9 [ffff8801a69c3da8] sd_shutdown at ffffffff815d3c3c This happens because iscsi_eh_cmd_timed_out(), the transport layer timeout helper, would tell the queue timeout function (scsi_times_out) to reset the request timer over and over, until the session state is back to logged in state. Unfortunately, during server shutdown, this might never happen again. Other option would be "not to handle" the issue in the transport layer. That would trigger the error handler logic, which would also need the session state to be logged in again. Best option, for such case, is to tell upper layers that the command was handled during the transport layer error handler helper, marking it as DID_NO_CONNECT, which will allow completion and inform about the problem. After the session was marked as ISCSI_STATE_FAILED, due to the first timeout during the server shutdown phase, all subsequent cmds will fail to be queued, allowing upper logic to fail faster. Signed-off-by: Rafael David Tinoco <rafael.tinoco@canonical.com> Reviewed-by: Lee Duncan <lduncan@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-12-08 05:59:13 +08:00
/*
* During shutdown, if session is prematurely disconnected,
* recovery won't happen and there will be hung cmds. Not
* handling cmds would trigger EH, also bad in this case.
* Instead, handle cmd, allow completion to happen and let
* upper layer to deal with the result.
*/
if (unlikely(system_state != SYSTEM_RUNNING)) {
sc->result = DID_NO_CONNECT << 16;
ISCSI_DBG_EH(session, "sc on shutdown, handled\n");
rc = BLK_EH_DONE;
scsi: libiscsi: Allow sd_shutdown on bad transport If, for any reason, userland shuts down iscsi transport interfaces before proper logouts - like when logging in to LUNs manually, without logging out on server shutdown, or when automated scripts can't umount/logout from logged LUNs - kernel will hang forever on its sd_sync_cache() logic, after issuing the SYNCHRONIZE_CACHE cmd to all still existent paths. PID: 1 TASK: ffff8801a69b8000 CPU: 1 COMMAND: "systemd-shutdow" #0 [ffff8801a69c3a30] __schedule at ffffffff8183e9ee #1 [ffff8801a69c3a80] schedule at ffffffff8183f0d5 #2 [ffff8801a69c3a98] schedule_timeout at ffffffff81842199 #3 [ffff8801a69c3b40] io_schedule_timeout at ffffffff8183e604 #4 [ffff8801a69c3b70] wait_for_completion_io_timeout at ffffffff8183fc6c #5 [ffff8801a69c3bd0] blk_execute_rq at ffffffff813cfe10 #6 [ffff8801a69c3c88] scsi_execute at ffffffff815c3fc7 #7 [ffff8801a69c3cc8] scsi_execute_req_flags at ffffffff815c60fe #8 [ffff8801a69c3d30] sd_sync_cache at ffffffff815d37d7 #9 [ffff8801a69c3da8] sd_shutdown at ffffffff815d3c3c This happens because iscsi_eh_cmd_timed_out(), the transport layer timeout helper, would tell the queue timeout function (scsi_times_out) to reset the request timer over and over, until the session state is back to logged in state. Unfortunately, during server shutdown, this might never happen again. Other option would be "not to handle" the issue in the transport layer. That would trigger the error handler logic, which would also need the session state to be logged in again. Best option, for such case, is to tell upper layers that the command was handled during the transport layer error handler helper, marking it as DID_NO_CONNECT, which will allow completion and inform about the problem. After the session was marked as ISCSI_STATE_FAILED, due to the first timeout during the server shutdown phase, all subsequent cmds will fail to be queued, allowing upper logic to fail faster. Signed-off-by: Rafael David Tinoco <rafael.tinoco@canonical.com> Reviewed-by: Lee Duncan <lduncan@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-12-08 05:59:13 +08:00
goto done;
}
/*
* We are probably in the middle of iscsi recovery so let
* that complete and handle the error.
*/
rc = BLK_EH_RESET_TIMER;
goto done;
}
conn = session->leadconn;
if (!conn) {
/* In the middle of shuting down */
rc = BLK_EH_RESET_TIMER;
goto done;
}
/*
* If we have sent (at least queued to the network layer) a pdu or
* recvd one for the task since the last timeout ask for
* more time. If on the next timeout we have not made progress
* we can check if it is the task or connection when we send the
* nop as a ping.
*/
if (time_after(task->last_xfer, task->last_timeout)) {
ISCSI_DBG_EH(session, "Command making progress. Asking "
"scsi-ml for more time to complete. "
"Last data xfer at %lu. Last timeout was at "
"%lu\n.", task->last_xfer, task->last_timeout);
task->have_checked_conn = false;
rc = BLK_EH_RESET_TIMER;
goto done;
}
if (!conn->recv_timeout && !conn->ping_timeout)
goto done;
/*
* if the ping timedout then we are in the middle of cleaning up
* and can let the iscsi eh handle it
*/
if (iscsi_has_ping_timed_out(conn)) {
rc = BLK_EH_RESET_TIMER;
goto done;
}
scsi: libiscsi: Fix iscsi_task use after free() The following bug was reported and debugged by wubo40@huawei.com: When testing kernel 4.18 version, NULL pointer dereference problem occurs in iscsi_eh_cmd_timed_out() function. I think this bug in the upstream is still exists. The analysis reasons are as follows: 1) For some reason, I/O command did not complete within the timeout period. The block layer timer works, call scsi_times_out() to handle I/O timeout logic. At the same time the command just completes. 2) scsi_times_out() call iscsi_eh_cmd_timed_out() to process timeout logic. Although there is an NULL judgment for the task, the task has not been released yet now. 3) iscsi_complete_task() calls __iscsi_put_task(). The task reference count reaches zero, the conditions for free task is met, then iscsi_free_task() frees the task, and sets sc->SCp.ptr = NULL. After iscsi_eh_cmd_timed_out() passes the task judgment check, there can still be NULL dereference scenarios. CPU0 CPU3 |- scsi_times_out() |- iscsi_complete_task() | | |- iscsi_eh_cmd_timed_out() |- __iscsi_put_task() | | |- task=sc->SCp.ptr, task is not NUL, check passed |- iscsi_free_task(task) | | | |-> sc->SCp.ptr = NULL | | |- task is NULL now, NULL pointer dereference | | | \|/ \|/ Calltrace: [380751.840862] BUG: unable to handle kernel NULL pointer dereference at 0000000000000138 [380751.843709] PGD 0 P4D 0 [380751.844770] Oops: 0000 [#1] SMP PTI [380751.846283] CPU: 0 PID: 403 Comm: kworker/0:1H Kdump: loaded Tainted: G [380751.851467] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996) [380751.856521] Workqueue: kblockd blk_mq_timeout_work [380751.858527] RIP: 0010:iscsi_eh_cmd_timed_out+0x15e/0x2e0 [libiscsi] [380751.861129] Code: 83 ea 01 48 8d 74 d0 08 48 8b 10 48 8b 4a 50 48 85 c9 74 2c 48 39 d5 74 [380751.868811] RSP: 0018:ffffc1e280a5fd58 EFLAGS: 00010246 [380751.870978] RAX: ffff9fd1e84e15e0 RBX: ffff9fd1e84e6dd0 RCX: 0000000116acc580 [380751.873791] RDX: ffff9fd1f97a9400 RSI: ffff9fd1e84e1800 RDI: ffff9fd1e4d6d420 [380751.876059] RBP: ffff9fd1e4d49000 R08: 0000000116acc580 R09: 0000000116acc580 [380751.878284] R10: 0000000000000000 R11: 0000000000000000 R12: ffff9fd1e6e931e8 [380751.880500] R13: ffff9fd1e84e6ee0 R14: 0000000000000010 R15: 0000000000000003 [380751.882687] FS: 0000000000000000(0000) GS:ffff9fd1fac00000(0000) knlGS:0000000000000000 [380751.885236] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [380751.887059] CR2: 0000000000000138 CR3: 000000011860a001 CR4: 00000000003606f0 [380751.889308] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [380751.891523] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [380751.893738] Call Trace: [380751.894639] scsi_times_out+0x60/0x1c0 [380751.895861] blk_mq_check_expired+0x144/0x200 [380751.897302] ? __switch_to_asm+0x35/0x70 [380751.898551] blk_mq_queue_tag_busy_iter+0x195/0x2e0 [380751.900091] ? __blk_mq_requeue_request+0x100/0x100 [380751.901611] ? __switch_to_asm+0x41/0x70 [380751.902853] ? __blk_mq_requeue_request+0x100/0x100 [380751.904398] blk_mq_timeout_work+0x54/0x130 [380751.905740] process_one_work+0x195/0x390 [380751.907228] worker_thread+0x30/0x390 [380751.908713] ? process_one_work+0x390/0x390 [380751.910350] kthread+0x10d/0x130 [380751.911470] ? kthread_flush_work_fn+0x10/0x10 [380751.913007] ret_from_fork+0x35/0x40 crash> dis -l iscsi_eh_cmd_timed_out+0x15e xxxxx/drivers/scsi/libiscsi.c: 2062 1970 enum blk_eh_timer_return iscsi_eh_cmd_timed_out(struct scsi_cmnd *sc) { ... 1984 spin_lock_bh(&session->frwd_lock); 1985 task = (struct iscsi_task *)sc->SCp.ptr; 1986 if (!task) { 1987 /* 1988 * Raced with completion. Blk layer has taken ownership 1989 * so let timeout code complete it now. 1990 */ 1991 rc = BLK_EH_DONE; 1992 goto done; 1993 } ... 2052 for (i = 0; i < conn->session->cmds_max; i++) { 2053 running_task = conn->session->cmds[i]; 2054 if (!running_task->sc || running_task == task || 2055 running_task->state != ISCSI_TASK_RUNNING) 2056 continue; 2057 2058 /* 2059 * Only check if cmds started before this one have made 2060 * progress, or this could never fail 2061 */ 2062 if (time_after(running_task->sc->jiffies_at_alloc, 2063 task->sc->jiffies_at_alloc)) <--- 2064 continue; 2065 ... } carsh> struct scsi_cmnd ffff9fd1e6e931e8 struct scsi_cmnd { ... SCp = { ptr = 0x0, <--- iscsi_task this_residual = 0, ... }, } To prevent this, we take a ref to the cmd under the back (completion) lock so if the completion side were to call iscsi_complete_task() on the task while the timer/eh paths are not holding the back_lock it will not be freed from under us. Note that this requires the previous patch, "scsi: libiscsi: Drop taskqueuelock" because bnx2i sleeps in its cleanup_task callout if the cmd is aborted. If the EH/timer and completion path are racing we don't know which path will do the last put. The previous patch moved the operations we needed to do under the forward lock to cleanup_queued_task. Once that has run we can drop the forward lock for the cmd and bnx2i no longer has to worry about if the EH, timer or completion path did the ast put and if the forward lock is held or not since it won't be. Link: https://lore.kernel.org/r/20210207044608.27585-4-michael.christie@oracle.com Reported-by: Wu Bo <wubo40@huawei.com> Reviewed-by: Lee Duncan <lduncan@suse.com> Signed-off-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-02-07 12:46:02 +08:00
spin_lock(&session->back_lock);
for (i = 0; i < conn->session->cmds_max; i++) {
running_task = conn->session->cmds[i];
if (!running_task->sc || running_task == task ||
running_task->state != ISCSI_TASK_RUNNING)
continue;
/*
* Only check if cmds started before this one have made
* progress, or this could never fail
*/
if (time_after(running_task->sc->jiffies_at_alloc,
task->sc->jiffies_at_alloc))
continue;
if (time_after(running_task->last_xfer, task->last_timeout)) {
/*
* This task has not made progress, but a task
* started before us has transferred data since
* we started/last-checked. We could be queueing
* too many tasks or the LU is bad.
*
* If the device is bad the cmds ahead of us on
* other devs will complete, and this loop will
* eventually fail starting the scsi eh.
*/
ISCSI_DBG_EH(session, "Command has not made progress "
"but commands ahead of it have. "
"Asking scsi-ml for more time to "
"complete. Our last xfer vs running task "
"last xfer %lu/%lu. Last check %lu.\n",
task->last_xfer, running_task->last_xfer,
task->last_timeout);
scsi: libiscsi: Fix iscsi_task use after free() The following bug was reported and debugged by wubo40@huawei.com: When testing kernel 4.18 version, NULL pointer dereference problem occurs in iscsi_eh_cmd_timed_out() function. I think this bug in the upstream is still exists. The analysis reasons are as follows: 1) For some reason, I/O command did not complete within the timeout period. The block layer timer works, call scsi_times_out() to handle I/O timeout logic. At the same time the command just completes. 2) scsi_times_out() call iscsi_eh_cmd_timed_out() to process timeout logic. Although there is an NULL judgment for the task, the task has not been released yet now. 3) iscsi_complete_task() calls __iscsi_put_task(). The task reference count reaches zero, the conditions for free task is met, then iscsi_free_task() frees the task, and sets sc->SCp.ptr = NULL. After iscsi_eh_cmd_timed_out() passes the task judgment check, there can still be NULL dereference scenarios. CPU0 CPU3 |- scsi_times_out() |- iscsi_complete_task() | | |- iscsi_eh_cmd_timed_out() |- __iscsi_put_task() | | |- task=sc->SCp.ptr, task is not NUL, check passed |- iscsi_free_task(task) | | | |-> sc->SCp.ptr = NULL | | |- task is NULL now, NULL pointer dereference | | | \|/ \|/ Calltrace: [380751.840862] BUG: unable to handle kernel NULL pointer dereference at 0000000000000138 [380751.843709] PGD 0 P4D 0 [380751.844770] Oops: 0000 [#1] SMP PTI [380751.846283] CPU: 0 PID: 403 Comm: kworker/0:1H Kdump: loaded Tainted: G [380751.851467] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996) [380751.856521] Workqueue: kblockd blk_mq_timeout_work [380751.858527] RIP: 0010:iscsi_eh_cmd_timed_out+0x15e/0x2e0 [libiscsi] [380751.861129] Code: 83 ea 01 48 8d 74 d0 08 48 8b 10 48 8b 4a 50 48 85 c9 74 2c 48 39 d5 74 [380751.868811] RSP: 0018:ffffc1e280a5fd58 EFLAGS: 00010246 [380751.870978] RAX: ffff9fd1e84e15e0 RBX: ffff9fd1e84e6dd0 RCX: 0000000116acc580 [380751.873791] RDX: ffff9fd1f97a9400 RSI: ffff9fd1e84e1800 RDI: ffff9fd1e4d6d420 [380751.876059] RBP: ffff9fd1e4d49000 R08: 0000000116acc580 R09: 0000000116acc580 [380751.878284] R10: 0000000000000000 R11: 0000000000000000 R12: ffff9fd1e6e931e8 [380751.880500] R13: ffff9fd1e84e6ee0 R14: 0000000000000010 R15: 0000000000000003 [380751.882687] FS: 0000000000000000(0000) GS:ffff9fd1fac00000(0000) knlGS:0000000000000000 [380751.885236] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [380751.887059] CR2: 0000000000000138 CR3: 000000011860a001 CR4: 00000000003606f0 [380751.889308] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [380751.891523] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [380751.893738] Call Trace: [380751.894639] scsi_times_out+0x60/0x1c0 [380751.895861] blk_mq_check_expired+0x144/0x200 [380751.897302] ? __switch_to_asm+0x35/0x70 [380751.898551] blk_mq_queue_tag_busy_iter+0x195/0x2e0 [380751.900091] ? __blk_mq_requeue_request+0x100/0x100 [380751.901611] ? __switch_to_asm+0x41/0x70 [380751.902853] ? __blk_mq_requeue_request+0x100/0x100 [380751.904398] blk_mq_timeout_work+0x54/0x130 [380751.905740] process_one_work+0x195/0x390 [380751.907228] worker_thread+0x30/0x390 [380751.908713] ? process_one_work+0x390/0x390 [380751.910350] kthread+0x10d/0x130 [380751.911470] ? kthread_flush_work_fn+0x10/0x10 [380751.913007] ret_from_fork+0x35/0x40 crash> dis -l iscsi_eh_cmd_timed_out+0x15e xxxxx/drivers/scsi/libiscsi.c: 2062 1970 enum blk_eh_timer_return iscsi_eh_cmd_timed_out(struct scsi_cmnd *sc) { ... 1984 spin_lock_bh(&session->frwd_lock); 1985 task = (struct iscsi_task *)sc->SCp.ptr; 1986 if (!task) { 1987 /* 1988 * Raced with completion. Blk layer has taken ownership 1989 * so let timeout code complete it now. 1990 */ 1991 rc = BLK_EH_DONE; 1992 goto done; 1993 } ... 2052 for (i = 0; i < conn->session->cmds_max; i++) { 2053 running_task = conn->session->cmds[i]; 2054 if (!running_task->sc || running_task == task || 2055 running_task->state != ISCSI_TASK_RUNNING) 2056 continue; 2057 2058 /* 2059 * Only check if cmds started before this one have made 2060 * progress, or this could never fail 2061 */ 2062 if (time_after(running_task->sc->jiffies_at_alloc, 2063 task->sc->jiffies_at_alloc)) <--- 2064 continue; 2065 ... } carsh> struct scsi_cmnd ffff9fd1e6e931e8 struct scsi_cmnd { ... SCp = { ptr = 0x0, <--- iscsi_task this_residual = 0, ... }, } To prevent this, we take a ref to the cmd under the back (completion) lock so if the completion side were to call iscsi_complete_task() on the task while the timer/eh paths are not holding the back_lock it will not be freed from under us. Note that this requires the previous patch, "scsi: libiscsi: Drop taskqueuelock" because bnx2i sleeps in its cleanup_task callout if the cmd is aborted. If the EH/timer and completion path are racing we don't know which path will do the last put. The previous patch moved the operations we needed to do under the forward lock to cleanup_queued_task. Once that has run we can drop the forward lock for the cmd and bnx2i no longer has to worry about if the EH, timer or completion path did the ast put and if the forward lock is held or not since it won't be. Link: https://lore.kernel.org/r/20210207044608.27585-4-michael.christie@oracle.com Reported-by: Wu Bo <wubo40@huawei.com> Reviewed-by: Lee Duncan <lduncan@suse.com> Signed-off-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-02-07 12:46:02 +08:00
spin_unlock(&session->back_lock);
rc = BLK_EH_RESET_TIMER;
goto done;
}
}
scsi: libiscsi: Fix iscsi_task use after free() The following bug was reported and debugged by wubo40@huawei.com: When testing kernel 4.18 version, NULL pointer dereference problem occurs in iscsi_eh_cmd_timed_out() function. I think this bug in the upstream is still exists. The analysis reasons are as follows: 1) For some reason, I/O command did not complete within the timeout period. The block layer timer works, call scsi_times_out() to handle I/O timeout logic. At the same time the command just completes. 2) scsi_times_out() call iscsi_eh_cmd_timed_out() to process timeout logic. Although there is an NULL judgment for the task, the task has not been released yet now. 3) iscsi_complete_task() calls __iscsi_put_task(). The task reference count reaches zero, the conditions for free task is met, then iscsi_free_task() frees the task, and sets sc->SCp.ptr = NULL. After iscsi_eh_cmd_timed_out() passes the task judgment check, there can still be NULL dereference scenarios. CPU0 CPU3 |- scsi_times_out() |- iscsi_complete_task() | | |- iscsi_eh_cmd_timed_out() |- __iscsi_put_task() | | |- task=sc->SCp.ptr, task is not NUL, check passed |- iscsi_free_task(task) | | | |-> sc->SCp.ptr = NULL | | |- task is NULL now, NULL pointer dereference | | | \|/ \|/ Calltrace: [380751.840862] BUG: unable to handle kernel NULL pointer dereference at 0000000000000138 [380751.843709] PGD 0 P4D 0 [380751.844770] Oops: 0000 [#1] SMP PTI [380751.846283] CPU: 0 PID: 403 Comm: kworker/0:1H Kdump: loaded Tainted: G [380751.851467] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996) [380751.856521] Workqueue: kblockd blk_mq_timeout_work [380751.858527] RIP: 0010:iscsi_eh_cmd_timed_out+0x15e/0x2e0 [libiscsi] [380751.861129] Code: 83 ea 01 48 8d 74 d0 08 48 8b 10 48 8b 4a 50 48 85 c9 74 2c 48 39 d5 74 [380751.868811] RSP: 0018:ffffc1e280a5fd58 EFLAGS: 00010246 [380751.870978] RAX: ffff9fd1e84e15e0 RBX: ffff9fd1e84e6dd0 RCX: 0000000116acc580 [380751.873791] RDX: ffff9fd1f97a9400 RSI: ffff9fd1e84e1800 RDI: ffff9fd1e4d6d420 [380751.876059] RBP: ffff9fd1e4d49000 R08: 0000000116acc580 R09: 0000000116acc580 [380751.878284] R10: 0000000000000000 R11: 0000000000000000 R12: ffff9fd1e6e931e8 [380751.880500] R13: ffff9fd1e84e6ee0 R14: 0000000000000010 R15: 0000000000000003 [380751.882687] FS: 0000000000000000(0000) GS:ffff9fd1fac00000(0000) knlGS:0000000000000000 [380751.885236] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [380751.887059] CR2: 0000000000000138 CR3: 000000011860a001 CR4: 00000000003606f0 [380751.889308] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [380751.891523] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [380751.893738] Call Trace: [380751.894639] scsi_times_out+0x60/0x1c0 [380751.895861] blk_mq_check_expired+0x144/0x200 [380751.897302] ? __switch_to_asm+0x35/0x70 [380751.898551] blk_mq_queue_tag_busy_iter+0x195/0x2e0 [380751.900091] ? __blk_mq_requeue_request+0x100/0x100 [380751.901611] ? __switch_to_asm+0x41/0x70 [380751.902853] ? __blk_mq_requeue_request+0x100/0x100 [380751.904398] blk_mq_timeout_work+0x54/0x130 [380751.905740] process_one_work+0x195/0x390 [380751.907228] worker_thread+0x30/0x390 [380751.908713] ? process_one_work+0x390/0x390 [380751.910350] kthread+0x10d/0x130 [380751.911470] ? kthread_flush_work_fn+0x10/0x10 [380751.913007] ret_from_fork+0x35/0x40 crash> dis -l iscsi_eh_cmd_timed_out+0x15e xxxxx/drivers/scsi/libiscsi.c: 2062 1970 enum blk_eh_timer_return iscsi_eh_cmd_timed_out(struct scsi_cmnd *sc) { ... 1984 spin_lock_bh(&session->frwd_lock); 1985 task = (struct iscsi_task *)sc->SCp.ptr; 1986 if (!task) { 1987 /* 1988 * Raced with completion. Blk layer has taken ownership 1989 * so let timeout code complete it now. 1990 */ 1991 rc = BLK_EH_DONE; 1992 goto done; 1993 } ... 2052 for (i = 0; i < conn->session->cmds_max; i++) { 2053 running_task = conn->session->cmds[i]; 2054 if (!running_task->sc || running_task == task || 2055 running_task->state != ISCSI_TASK_RUNNING) 2056 continue; 2057 2058 /* 2059 * Only check if cmds started before this one have made 2060 * progress, or this could never fail 2061 */ 2062 if (time_after(running_task->sc->jiffies_at_alloc, 2063 task->sc->jiffies_at_alloc)) <--- 2064 continue; 2065 ... } carsh> struct scsi_cmnd ffff9fd1e6e931e8 struct scsi_cmnd { ... SCp = { ptr = 0x0, <--- iscsi_task this_residual = 0, ... }, } To prevent this, we take a ref to the cmd under the back (completion) lock so if the completion side were to call iscsi_complete_task() on the task while the timer/eh paths are not holding the back_lock it will not be freed from under us. Note that this requires the previous patch, "scsi: libiscsi: Drop taskqueuelock" because bnx2i sleeps in its cleanup_task callout if the cmd is aborted. If the EH/timer and completion path are racing we don't know which path will do the last put. The previous patch moved the operations we needed to do under the forward lock to cleanup_queued_task. Once that has run we can drop the forward lock for the cmd and bnx2i no longer has to worry about if the EH, timer or completion path did the ast put and if the forward lock is held or not since it won't be. Link: https://lore.kernel.org/r/20210207044608.27585-4-michael.christie@oracle.com Reported-by: Wu Bo <wubo40@huawei.com> Reviewed-by: Lee Duncan <lduncan@suse.com> Signed-off-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-02-07 12:46:02 +08:00
spin_unlock(&session->back_lock);
/* Assumes nop timeout is shorter than scsi cmd timeout */
if (task->have_checked_conn)
goto done;
/*
* Checking the transport already or nop from a cmd timeout still
* running
*/
if (READ_ONCE(conn->ping_task)) {
task->have_checked_conn = true;
rc = BLK_EH_RESET_TIMER;
goto done;
}
/* Make sure there is a transport check done */
iscsi_send_nopout(conn, NULL);
task->have_checked_conn = true;
rc = BLK_EH_RESET_TIMER;
done:
scsi: iscsi: Fix a potential deadlock in the timeout handler Some time ago the block layer was modified such that timeout handlers are called from thread context instead of interrupt context. Make it safe to run the iSCSI timeout handler in thread context. This patch fixes the following lockdep complaint: ================================ WARNING: inconsistent lock state 5.5.1-dbg+ #11 Not tainted -------------------------------- inconsistent {IN-SOFTIRQ-W} -> {SOFTIRQ-ON-W} usage. kworker/7:1H/206 [HC0[0]:SC0[0]:HE1:SE1] takes: ffff88802d9827e8 (&(&session->frwd_lock)->rlock){+.?.}, at: iscsi_eh_cmd_timed_out+0xa6/0x6d0 [libiscsi] {IN-SOFTIRQ-W} state was registered at: lock_acquire+0x106/0x240 _raw_spin_lock+0x38/0x50 iscsi_check_transport_timeouts+0x3e/0x210 [libiscsi] call_timer_fn+0x132/0x470 __run_timers.part.0+0x39f/0x5b0 run_timer_softirq+0x63/0xc0 __do_softirq+0x12d/0x5fd irq_exit+0xb3/0x110 smp_apic_timer_interrupt+0x131/0x3d0 apic_timer_interrupt+0xf/0x20 default_idle+0x31/0x230 arch_cpu_idle+0x13/0x20 default_idle_call+0x53/0x60 do_idle+0x38a/0x3f0 cpu_startup_entry+0x24/0x30 start_secondary+0x222/0x290 secondary_startup_64+0xa4/0xb0 irq event stamp: 1383705 hardirqs last enabled at (1383705): [<ffffffff81aace5c>] _raw_spin_unlock_irq+0x2c/0x50 hardirqs last disabled at (1383704): [<ffffffff81aacb98>] _raw_spin_lock_irq+0x18/0x50 softirqs last enabled at (1383690): [<ffffffffa0e2efea>] iscsi_queuecommand+0x76a/0xa20 [libiscsi] softirqs last disabled at (1383682): [<ffffffffa0e2e998>] iscsi_queuecommand+0x118/0xa20 [libiscsi] other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(&(&session->frwd_lock)->rlock); <Interrupt> lock(&(&session->frwd_lock)->rlock); *** DEADLOCK *** 2 locks held by kworker/7:1H/206: #0: ffff8880d57bf928 ((wq_completion)kblockd){+.+.}, at: process_one_work+0x472/0xab0 #1: ffff88802b9c7de8 ((work_completion)(&q->timeout_work)){+.+.}, at: process_one_work+0x476/0xab0 stack backtrace: CPU: 7 PID: 206 Comm: kworker/7:1H Not tainted 5.5.1-dbg+ #11 Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011 Workqueue: kblockd blk_mq_timeout_work Call Trace: dump_stack+0xa5/0xe6 print_usage_bug.cold+0x232/0x23b mark_lock+0x8dc/0xa70 __lock_acquire+0xcea/0x2af0 lock_acquire+0x106/0x240 _raw_spin_lock+0x38/0x50 iscsi_eh_cmd_timed_out+0xa6/0x6d0 [libiscsi] scsi_times_out+0xf4/0x440 [scsi_mod] scsi_timeout+0x1d/0x20 [scsi_mod] blk_mq_check_expired+0x365/0x3a0 bt_iter+0xd6/0xf0 blk_mq_queue_tag_busy_iter+0x3de/0x650 blk_mq_timeout_work+0x1af/0x380 process_one_work+0x56d/0xab0 worker_thread+0x7a/0x5d0 kthread+0x1bc/0x210 ret_from_fork+0x24/0x30 Fixes: 287922eb0b18 ("block: defer timeouts to a workqueue") Cc: Christoph Hellwig <hch@lst.de> Cc: Keith Busch <keith.busch@intel.com> Cc: Lee Duncan <lduncan@suse.com> Cc: Chris Leech <cleech@redhat.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20191209173457.187370-1-bvanassche@acm.org Signed-off-by: Bart Van Assche <bvanassche@acm.org> Reviewed-by: Lee Duncan <lduncan@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-12-10 01:34:57 +08:00
spin_unlock_bh(&session->frwd_lock);
scsi: libiscsi: Fix iscsi_task use after free() The following bug was reported and debugged by wubo40@huawei.com: When testing kernel 4.18 version, NULL pointer dereference problem occurs in iscsi_eh_cmd_timed_out() function. I think this bug in the upstream is still exists. The analysis reasons are as follows: 1) For some reason, I/O command did not complete within the timeout period. The block layer timer works, call scsi_times_out() to handle I/O timeout logic. At the same time the command just completes. 2) scsi_times_out() call iscsi_eh_cmd_timed_out() to process timeout logic. Although there is an NULL judgment for the task, the task has not been released yet now. 3) iscsi_complete_task() calls __iscsi_put_task(). The task reference count reaches zero, the conditions for free task is met, then iscsi_free_task() frees the task, and sets sc->SCp.ptr = NULL. After iscsi_eh_cmd_timed_out() passes the task judgment check, there can still be NULL dereference scenarios. CPU0 CPU3 |- scsi_times_out() |- iscsi_complete_task() | | |- iscsi_eh_cmd_timed_out() |- __iscsi_put_task() | | |- task=sc->SCp.ptr, task is not NUL, check passed |- iscsi_free_task(task) | | | |-> sc->SCp.ptr = NULL | | |- task is NULL now, NULL pointer dereference | | | \|/ \|/ Calltrace: [380751.840862] BUG: unable to handle kernel NULL pointer dereference at 0000000000000138 [380751.843709] PGD 0 P4D 0 [380751.844770] Oops: 0000 [#1] SMP PTI [380751.846283] CPU: 0 PID: 403 Comm: kworker/0:1H Kdump: loaded Tainted: G [380751.851467] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996) [380751.856521] Workqueue: kblockd blk_mq_timeout_work [380751.858527] RIP: 0010:iscsi_eh_cmd_timed_out+0x15e/0x2e0 [libiscsi] [380751.861129] Code: 83 ea 01 48 8d 74 d0 08 48 8b 10 48 8b 4a 50 48 85 c9 74 2c 48 39 d5 74 [380751.868811] RSP: 0018:ffffc1e280a5fd58 EFLAGS: 00010246 [380751.870978] RAX: ffff9fd1e84e15e0 RBX: ffff9fd1e84e6dd0 RCX: 0000000116acc580 [380751.873791] RDX: ffff9fd1f97a9400 RSI: ffff9fd1e84e1800 RDI: ffff9fd1e4d6d420 [380751.876059] RBP: ffff9fd1e4d49000 R08: 0000000116acc580 R09: 0000000116acc580 [380751.878284] R10: 0000000000000000 R11: 0000000000000000 R12: ffff9fd1e6e931e8 [380751.880500] R13: ffff9fd1e84e6ee0 R14: 0000000000000010 R15: 0000000000000003 [380751.882687] FS: 0000000000000000(0000) GS:ffff9fd1fac00000(0000) knlGS:0000000000000000 [380751.885236] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [380751.887059] CR2: 0000000000000138 CR3: 000000011860a001 CR4: 00000000003606f0 [380751.889308] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [380751.891523] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [380751.893738] Call Trace: [380751.894639] scsi_times_out+0x60/0x1c0 [380751.895861] blk_mq_check_expired+0x144/0x200 [380751.897302] ? __switch_to_asm+0x35/0x70 [380751.898551] blk_mq_queue_tag_busy_iter+0x195/0x2e0 [380751.900091] ? __blk_mq_requeue_request+0x100/0x100 [380751.901611] ? __switch_to_asm+0x41/0x70 [380751.902853] ? __blk_mq_requeue_request+0x100/0x100 [380751.904398] blk_mq_timeout_work+0x54/0x130 [380751.905740] process_one_work+0x195/0x390 [380751.907228] worker_thread+0x30/0x390 [380751.908713] ? process_one_work+0x390/0x390 [380751.910350] kthread+0x10d/0x130 [380751.911470] ? kthread_flush_work_fn+0x10/0x10 [380751.913007] ret_from_fork+0x35/0x40 crash> dis -l iscsi_eh_cmd_timed_out+0x15e xxxxx/drivers/scsi/libiscsi.c: 2062 1970 enum blk_eh_timer_return iscsi_eh_cmd_timed_out(struct scsi_cmnd *sc) { ... 1984 spin_lock_bh(&session->frwd_lock); 1985 task = (struct iscsi_task *)sc->SCp.ptr; 1986 if (!task) { 1987 /* 1988 * Raced with completion. Blk layer has taken ownership 1989 * so let timeout code complete it now. 1990 */ 1991 rc = BLK_EH_DONE; 1992 goto done; 1993 } ... 2052 for (i = 0; i < conn->session->cmds_max; i++) { 2053 running_task = conn->session->cmds[i]; 2054 if (!running_task->sc || running_task == task || 2055 running_task->state != ISCSI_TASK_RUNNING) 2056 continue; 2057 2058 /* 2059 * Only check if cmds started before this one have made 2060 * progress, or this could never fail 2061 */ 2062 if (time_after(running_task->sc->jiffies_at_alloc, 2063 task->sc->jiffies_at_alloc)) <--- 2064 continue; 2065 ... } carsh> struct scsi_cmnd ffff9fd1e6e931e8 struct scsi_cmnd { ... SCp = { ptr = 0x0, <--- iscsi_task this_residual = 0, ... }, } To prevent this, we take a ref to the cmd under the back (completion) lock so if the completion side were to call iscsi_complete_task() on the task while the timer/eh paths are not holding the back_lock it will not be freed from under us. Note that this requires the previous patch, "scsi: libiscsi: Drop taskqueuelock" because bnx2i sleeps in its cleanup_task callout if the cmd is aborted. If the EH/timer and completion path are racing we don't know which path will do the last put. The previous patch moved the operations we needed to do under the forward lock to cleanup_queued_task. Once that has run we can drop the forward lock for the cmd and bnx2i no longer has to worry about if the EH, timer or completion path did the ast put and if the forward lock is held or not since it won't be. Link: https://lore.kernel.org/r/20210207044608.27585-4-michael.christie@oracle.com Reported-by: Wu Bo <wubo40@huawei.com> Reviewed-by: Lee Duncan <lduncan@suse.com> Signed-off-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-02-07 12:46:02 +08:00
if (task) {
task->last_timeout = jiffies;
iscsi_put_task(task);
}
ISCSI_DBG_EH(session, "return %s\n", rc == BLK_EH_RESET_TIMER ?
scsi: libiscsi: Allow sd_shutdown on bad transport If, for any reason, userland shuts down iscsi transport interfaces before proper logouts - like when logging in to LUNs manually, without logging out on server shutdown, or when automated scripts can't umount/logout from logged LUNs - kernel will hang forever on its sd_sync_cache() logic, after issuing the SYNCHRONIZE_CACHE cmd to all still existent paths. PID: 1 TASK: ffff8801a69b8000 CPU: 1 COMMAND: "systemd-shutdow" #0 [ffff8801a69c3a30] __schedule at ffffffff8183e9ee #1 [ffff8801a69c3a80] schedule at ffffffff8183f0d5 #2 [ffff8801a69c3a98] schedule_timeout at ffffffff81842199 #3 [ffff8801a69c3b40] io_schedule_timeout at ffffffff8183e604 #4 [ffff8801a69c3b70] wait_for_completion_io_timeout at ffffffff8183fc6c #5 [ffff8801a69c3bd0] blk_execute_rq at ffffffff813cfe10 #6 [ffff8801a69c3c88] scsi_execute at ffffffff815c3fc7 #7 [ffff8801a69c3cc8] scsi_execute_req_flags at ffffffff815c60fe #8 [ffff8801a69c3d30] sd_sync_cache at ffffffff815d37d7 #9 [ffff8801a69c3da8] sd_shutdown at ffffffff815d3c3c This happens because iscsi_eh_cmd_timed_out(), the transport layer timeout helper, would tell the queue timeout function (scsi_times_out) to reset the request timer over and over, until the session state is back to logged in state. Unfortunately, during server shutdown, this might never happen again. Other option would be "not to handle" the issue in the transport layer. That would trigger the error handler logic, which would also need the session state to be logged in again. Best option, for such case, is to tell upper layers that the command was handled during the transport layer error handler helper, marking it as DID_NO_CONNECT, which will allow completion and inform about the problem. After the session was marked as ISCSI_STATE_FAILED, due to the first timeout during the server shutdown phase, all subsequent cmds will fail to be queued, allowing upper logic to fail faster. Signed-off-by: Rafael David Tinoco <rafael.tinoco@canonical.com> Reviewed-by: Lee Duncan <lduncan@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-12-08 05:59:13 +08:00
"timer reset" : "shutdown or nh");
return rc;
}
EXPORT_SYMBOL_GPL(iscsi_eh_cmd_timed_out);
static void iscsi_check_transport_timeouts(struct timer_list *t)
{
struct iscsi_conn *conn = from_timer(conn, t, transport_timer);
struct iscsi_session *session = conn->session;
unsigned long recv_timeout, next_timeout = 0, last_recv;
[SCSI] libiscsi: Reduce locking contention in fast path Replace the session lock with two locks, a forward lock and a backwards lock named frwd_lock and back_lock respectively. The forward lock protects resources that change while sending a request to the target, such as cmdsn, queued_cmdsn, and allocating task from the commands' pool with kfifo_out. The backward lock protects resources that change while processing a response or in error path, such as cmdsn_exp, cmdsn_max, and returning tasks to the commands' pool with kfifo_in. Under a steady state fast-path situation, that is when one or more processes/threads submit IO to an iscsi device and a single kernel upcall (e.g softirq) is dealing with processing of responses without errors, this patch eliminates the contention between the queuecommand()/request response/scsi_done() flows associated with iscsi sessions. Between the forward and the backward locks exists a strict locking hierarchy. The mutual exclusion zone protected by the forward lock can enclose the mutual exclusion zone protected by the backward lock but not vice versa. For example, in iscsi_conn_teardown or in iscsi_xmit_data when there is a failure and __iscsi_put_task is called, the backward lock is taken while the forward lock is still taken. On the other hand, if in the RX path a nop is to be sent, for example in iscsi_handle_reject or __iscsi_complete_pdu than the forward lock is released and the backward lock is taken for the duration of iscsi_send_nopout, later the backward lock is released and the forward lock is retaken. libiscsi_tcp uses two kernel fifos the r2t pool and the r2t queue. The insertion and deletion from these queues didn't corespond to the assumption taken by the new forward/backwards session locking paradigm. That is, in iscsi_tcp_clenup_task which belongs to the RX (backwards) path, r2t is taken out from r2t queue and inserted to the r2t pool. In iscsi_tcp_get_curr_r2t which belong to the TX (forward) path, r2t is also inserted to the r2t pool and another r2t is pulled from r2t queue. Only in iscsi_tcp_r2t_rsp which is called in the RX path but can requeue to the TX path, r2t is taken from the r2t pool and inserted to the r2t queue. In order to cope with this situation, two spin locks were added, pool2queue and queue2pool. The former protects extracting from the r2t pool and inserting to the r2t queue, and the later protects the extracing from the r2t queue and inserting to the r2t pool. Signed-off-by: Shlomo Pongratz <shlomop@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> [minor fix up to apply cleanly and compile fix] Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2014-02-07 14:41:38 +08:00
spin_lock(&session->frwd_lock);
if (session->state != ISCSI_STATE_LOGGED_IN)
goto done;
recv_timeout = conn->recv_timeout;
if (!recv_timeout)
goto done;
recv_timeout *= HZ;
last_recv = conn->last_recv;
if (iscsi_has_ping_timed_out(conn)) {
iscsi_conn_printk(KERN_ERR, conn, "ping timeout of %d secs "
"expired, recv timeout %d, last rx %lu, "
"last ping %lu, now %lu\n",
conn->ping_timeout, conn->recv_timeout,
last_recv, conn->last_ping, jiffies);
[SCSI] libiscsi: Reduce locking contention in fast path Replace the session lock with two locks, a forward lock and a backwards lock named frwd_lock and back_lock respectively. The forward lock protects resources that change while sending a request to the target, such as cmdsn, queued_cmdsn, and allocating task from the commands' pool with kfifo_out. The backward lock protects resources that change while processing a response or in error path, such as cmdsn_exp, cmdsn_max, and returning tasks to the commands' pool with kfifo_in. Under a steady state fast-path situation, that is when one or more processes/threads submit IO to an iscsi device and a single kernel upcall (e.g softirq) is dealing with processing of responses without errors, this patch eliminates the contention between the queuecommand()/request response/scsi_done() flows associated with iscsi sessions. Between the forward and the backward locks exists a strict locking hierarchy. The mutual exclusion zone protected by the forward lock can enclose the mutual exclusion zone protected by the backward lock but not vice versa. For example, in iscsi_conn_teardown or in iscsi_xmit_data when there is a failure and __iscsi_put_task is called, the backward lock is taken while the forward lock is still taken. On the other hand, if in the RX path a nop is to be sent, for example in iscsi_handle_reject or __iscsi_complete_pdu than the forward lock is released and the backward lock is taken for the duration of iscsi_send_nopout, later the backward lock is released and the forward lock is retaken. libiscsi_tcp uses two kernel fifos the r2t pool and the r2t queue. The insertion and deletion from these queues didn't corespond to the assumption taken by the new forward/backwards session locking paradigm. That is, in iscsi_tcp_clenup_task which belongs to the RX (backwards) path, r2t is taken out from r2t queue and inserted to the r2t pool. In iscsi_tcp_get_curr_r2t which belong to the TX (forward) path, r2t is also inserted to the r2t pool and another r2t is pulled from r2t queue. Only in iscsi_tcp_r2t_rsp which is called in the RX path but can requeue to the TX path, r2t is taken from the r2t pool and inserted to the r2t queue. In order to cope with this situation, two spin locks were added, pool2queue and queue2pool. The former protects extracting from the r2t pool and inserting to the r2t queue, and the later protects the extracing from the r2t queue and inserting to the r2t pool. Signed-off-by: Shlomo Pongratz <shlomop@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> [minor fix up to apply cleanly and compile fix] Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2014-02-07 14:41:38 +08:00
spin_unlock(&session->frwd_lock);
iscsi_conn_failure(conn, ISCSI_ERR_NOP_TIMEDOUT);
return;
}
if (time_before_eq(last_recv + recv_timeout, jiffies)) {
/* send a ping to try to provoke some traffic */
ISCSI_DBG_CONN(conn, "Sending nopout as ping\n");
if (iscsi_send_nopout(conn, NULL))
next_timeout = jiffies + (1 * HZ);
else
next_timeout = conn->last_ping + (conn->ping_timeout * HZ);
} else
next_timeout = last_recv + recv_timeout;
ISCSI_DBG_CONN(conn, "Setting next tmo %lu\n", next_timeout);
mod_timer(&conn->transport_timer, next_timeout);
done:
[SCSI] libiscsi: Reduce locking contention in fast path Replace the session lock with two locks, a forward lock and a backwards lock named frwd_lock and back_lock respectively. The forward lock protects resources that change while sending a request to the target, such as cmdsn, queued_cmdsn, and allocating task from the commands' pool with kfifo_out. The backward lock protects resources that change while processing a response or in error path, such as cmdsn_exp, cmdsn_max, and returning tasks to the commands' pool with kfifo_in. Under a steady state fast-path situation, that is when one or more processes/threads submit IO to an iscsi device and a single kernel upcall (e.g softirq) is dealing with processing of responses without errors, this patch eliminates the contention between the queuecommand()/request response/scsi_done() flows associated with iscsi sessions. Between the forward and the backward locks exists a strict locking hierarchy. The mutual exclusion zone protected by the forward lock can enclose the mutual exclusion zone protected by the backward lock but not vice versa. For example, in iscsi_conn_teardown or in iscsi_xmit_data when there is a failure and __iscsi_put_task is called, the backward lock is taken while the forward lock is still taken. On the other hand, if in the RX path a nop is to be sent, for example in iscsi_handle_reject or __iscsi_complete_pdu than the forward lock is released and the backward lock is taken for the duration of iscsi_send_nopout, later the backward lock is released and the forward lock is retaken. libiscsi_tcp uses two kernel fifos the r2t pool and the r2t queue. The insertion and deletion from these queues didn't corespond to the assumption taken by the new forward/backwards session locking paradigm. That is, in iscsi_tcp_clenup_task which belongs to the RX (backwards) path, r2t is taken out from r2t queue and inserted to the r2t pool. In iscsi_tcp_get_curr_r2t which belong to the TX (forward) path, r2t is also inserted to the r2t pool and another r2t is pulled from r2t queue. Only in iscsi_tcp_r2t_rsp which is called in the RX path but can requeue to the TX path, r2t is taken from the r2t pool and inserted to the r2t queue. In order to cope with this situation, two spin locks were added, pool2queue and queue2pool. The former protects extracting from the r2t pool and inserting to the r2t queue, and the later protects the extracing from the r2t queue and inserting to the r2t pool. Signed-off-by: Shlomo Pongratz <shlomop@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> [minor fix up to apply cleanly and compile fix] Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2014-02-07 14:41:38 +08:00
spin_unlock(&session->frwd_lock);
}
/**
* iscsi_conn_unbind - prevent queueing to conn.
* @cls_conn: iscsi conn ep is bound to.
* @is_active: is the conn in use for boot or is this for EH/termination
*
* This must be called by drivers implementing the ep_disconnect callout.
* It disables queueing to the connection from libiscsi in preparation for
* an ep_disconnect call.
*/
void iscsi_conn_unbind(struct iscsi_cls_conn *cls_conn, bool is_active)
{
struct iscsi_session *session;
struct iscsi_conn *conn;
if (!cls_conn)
return;
conn = cls_conn->dd_data;
session = conn->session;
/*
* Wait for iscsi_eh calls to exit. We don't wait for the tmf to
* complete or timeout. The caller just wants to know what's running
* is everything that needs to be cleaned up, and no cmds will be
* queued.
*/
mutex_lock(&session->eh_mutex);
iscsi_suspend_queue(conn);
iscsi_suspend_tx(conn);
spin_lock_bh(&session->frwd_lock);
clear_bit(ISCSI_CONN_FLAG_BOUND, &conn->flags);
if (!is_active) {
/*
* if logout timed out before userspace could even send a PDU
* the state might still be in ISCSI_STATE_LOGGED_IN and
* allowing new cmds and TMFs.
*/
if (session->state == ISCSI_STATE_LOGGED_IN)
iscsi_set_conn_failed(conn);
}
spin_unlock_bh(&session->frwd_lock);
mutex_unlock(&session->eh_mutex);
}
EXPORT_SYMBOL_GPL(iscsi_conn_unbind);
static void iscsi_prep_abort_task_pdu(struct iscsi_task *task,
struct iscsi_tm *hdr)
{
memset(hdr, 0, sizeof(*hdr));
hdr->opcode = ISCSI_OP_SCSI_TMFUNC | ISCSI_OP_IMMEDIATE;
hdr->flags = ISCSI_TM_FUNC_ABORT_TASK & ISCSI_FLAG_TM_FUNC_MASK;
hdr->flags |= ISCSI_FLAG_CMD_FINAL;
hdr->lun = task->lun;
hdr->rtt = task->hdr_itt;
hdr->refcmdsn = task->cmdsn;
}
int iscsi_eh_abort(struct scsi_cmnd *sc)
{
struct iscsi_cls_session *cls_session;
struct iscsi_session *session;
struct iscsi_conn *conn;
struct iscsi_task *task;
struct iscsi_tm *hdr;
int age;
cls_session = starget_to_session(scsi_target(sc->device));
session = cls_session->dd_data;
ISCSI_DBG_EH(session, "aborting sc %p\n", sc);
scsi: iscsi: Remove iscsi_get_task back_lock requirement We currently require that the back_lock is held when calling the functions that manipulate the iscsi_task refcount. The only reason for this is to handle races where we are handling SCSI-ml EH callbacks and the cmd is completing at the same time the normal completion path is running, and we can't return from the EH callback until the driver has stopped accessing the cmd. Holding the back_lock while also accessing the task->state made it simple to check that a cmd is completing and also get/put a refcount at the same time, and at the time we were not as concerned about performance. The problem is that we don't want to take the back_lock from the xmit path for normal I/O since it causes contention with the completion path if the user has chosen to try and split those paths on different CPUs (in this case abusing the CPUs and ignoring caching improves perf for some uses). Begins to remove the back_lock requirement for iscsi_get/put_task by removing the requirement for the get path. Instead of always holding the back_lock we detect if something has done the last put and is about to call iscsi_free_task(). A subsequent commit will then allow iSCSI code to do the last put on a task and only grab the back_lock if the refcount is now zero and it's going to call iscsi_free_task(). Link: https://lore.kernel.org/r/20220616224557.115234-8-michael.christie@oracle.com Reviewed-by: Lee Duncan <lduncan@suse.com> Signed-off-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-06-17 06:45:55 +08:00
completion_check:
mutex_lock(&session->eh_mutex);
[SCSI] libiscsi: Reduce locking contention in fast path Replace the session lock with two locks, a forward lock and a backwards lock named frwd_lock and back_lock respectively. The forward lock protects resources that change while sending a request to the target, such as cmdsn, queued_cmdsn, and allocating task from the commands' pool with kfifo_out. The backward lock protects resources that change while processing a response or in error path, such as cmdsn_exp, cmdsn_max, and returning tasks to the commands' pool with kfifo_in. Under a steady state fast-path situation, that is when one or more processes/threads submit IO to an iscsi device and a single kernel upcall (e.g softirq) is dealing with processing of responses without errors, this patch eliminates the contention between the queuecommand()/request response/scsi_done() flows associated with iscsi sessions. Between the forward and the backward locks exists a strict locking hierarchy. The mutual exclusion zone protected by the forward lock can enclose the mutual exclusion zone protected by the backward lock but not vice versa. For example, in iscsi_conn_teardown or in iscsi_xmit_data when there is a failure and __iscsi_put_task is called, the backward lock is taken while the forward lock is still taken. On the other hand, if in the RX path a nop is to be sent, for example in iscsi_handle_reject or __iscsi_complete_pdu than the forward lock is released and the backward lock is taken for the duration of iscsi_send_nopout, later the backward lock is released and the forward lock is retaken. libiscsi_tcp uses two kernel fifos the r2t pool and the r2t queue. The insertion and deletion from these queues didn't corespond to the assumption taken by the new forward/backwards session locking paradigm. That is, in iscsi_tcp_clenup_task which belongs to the RX (backwards) path, r2t is taken out from r2t queue and inserted to the r2t pool. In iscsi_tcp_get_curr_r2t which belong to the TX (forward) path, r2t is also inserted to the r2t pool and another r2t is pulled from r2t queue. Only in iscsi_tcp_r2t_rsp which is called in the RX path but can requeue to the TX path, r2t is taken from the r2t pool and inserted to the r2t queue. In order to cope with this situation, two spin locks were added, pool2queue and queue2pool. The former protects extracting from the r2t pool and inserting to the r2t queue, and the later protects the extracing from the r2t queue and inserting to the r2t pool. Signed-off-by: Shlomo Pongratz <shlomop@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> [minor fix up to apply cleanly and compile fix] Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2014-02-07 14:41:38 +08:00
spin_lock_bh(&session->frwd_lock);
/*
* if session was ISCSI_STATE_IN_RECOVERY then we may not have
* got the command.
*/
if (!iscsi_cmd(sc)->task) {
ISCSI_DBG_EH(session, "sc never reached iscsi layer or "
"it completed.\n");
[SCSI] libiscsi: Reduce locking contention in fast path Replace the session lock with two locks, a forward lock and a backwards lock named frwd_lock and back_lock respectively. The forward lock protects resources that change while sending a request to the target, such as cmdsn, queued_cmdsn, and allocating task from the commands' pool with kfifo_out. The backward lock protects resources that change while processing a response or in error path, such as cmdsn_exp, cmdsn_max, and returning tasks to the commands' pool with kfifo_in. Under a steady state fast-path situation, that is when one or more processes/threads submit IO to an iscsi device and a single kernel upcall (e.g softirq) is dealing with processing of responses without errors, this patch eliminates the contention between the queuecommand()/request response/scsi_done() flows associated with iscsi sessions. Between the forward and the backward locks exists a strict locking hierarchy. The mutual exclusion zone protected by the forward lock can enclose the mutual exclusion zone protected by the backward lock but not vice versa. For example, in iscsi_conn_teardown or in iscsi_xmit_data when there is a failure and __iscsi_put_task is called, the backward lock is taken while the forward lock is still taken. On the other hand, if in the RX path a nop is to be sent, for example in iscsi_handle_reject or __iscsi_complete_pdu than the forward lock is released and the backward lock is taken for the duration of iscsi_send_nopout, later the backward lock is released and the forward lock is retaken. libiscsi_tcp uses two kernel fifos the r2t pool and the r2t queue. The insertion and deletion from these queues didn't corespond to the assumption taken by the new forward/backwards session locking paradigm. That is, in iscsi_tcp_clenup_task which belongs to the RX (backwards) path, r2t is taken out from r2t queue and inserted to the r2t pool. In iscsi_tcp_get_curr_r2t which belong to the TX (forward) path, r2t is also inserted to the r2t pool and another r2t is pulled from r2t queue. Only in iscsi_tcp_r2t_rsp which is called in the RX path but can requeue to the TX path, r2t is taken from the r2t pool and inserted to the r2t queue. In order to cope with this situation, two spin locks were added, pool2queue and queue2pool. The former protects extracting from the r2t pool and inserting to the r2t queue, and the later protects the extracing from the r2t queue and inserting to the r2t pool. Signed-off-by: Shlomo Pongratz <shlomop@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> [minor fix up to apply cleanly and compile fix] Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2014-02-07 14:41:38 +08:00
spin_unlock_bh(&session->frwd_lock);
mutex_unlock(&session->eh_mutex);
return SUCCESS;
}
/*
* If we are not logged in or we have started a new session
* then let the host reset code handle this
*/
if (!session->leadconn || session->state != ISCSI_STATE_LOGGED_IN ||
iscsi_cmd(sc)->age != session->age) {
[SCSI] libiscsi: Reduce locking contention in fast path Replace the session lock with two locks, a forward lock and a backwards lock named frwd_lock and back_lock respectively. The forward lock protects resources that change while sending a request to the target, such as cmdsn, queued_cmdsn, and allocating task from the commands' pool with kfifo_out. The backward lock protects resources that change while processing a response or in error path, such as cmdsn_exp, cmdsn_max, and returning tasks to the commands' pool with kfifo_in. Under a steady state fast-path situation, that is when one or more processes/threads submit IO to an iscsi device and a single kernel upcall (e.g softirq) is dealing with processing of responses without errors, this patch eliminates the contention between the queuecommand()/request response/scsi_done() flows associated with iscsi sessions. Between the forward and the backward locks exists a strict locking hierarchy. The mutual exclusion zone protected by the forward lock can enclose the mutual exclusion zone protected by the backward lock but not vice versa. For example, in iscsi_conn_teardown or in iscsi_xmit_data when there is a failure and __iscsi_put_task is called, the backward lock is taken while the forward lock is still taken. On the other hand, if in the RX path a nop is to be sent, for example in iscsi_handle_reject or __iscsi_complete_pdu than the forward lock is released and the backward lock is taken for the duration of iscsi_send_nopout, later the backward lock is released and the forward lock is retaken. libiscsi_tcp uses two kernel fifos the r2t pool and the r2t queue. The insertion and deletion from these queues didn't corespond to the assumption taken by the new forward/backwards session locking paradigm. That is, in iscsi_tcp_clenup_task which belongs to the RX (backwards) path, r2t is taken out from r2t queue and inserted to the r2t pool. In iscsi_tcp_get_curr_r2t which belong to the TX (forward) path, r2t is also inserted to the r2t pool and another r2t is pulled from r2t queue. Only in iscsi_tcp_r2t_rsp which is called in the RX path but can requeue to the TX path, r2t is taken from the r2t pool and inserted to the r2t queue. In order to cope with this situation, two spin locks were added, pool2queue and queue2pool. The former protects extracting from the r2t pool and inserting to the r2t queue, and the later protects the extracing from the r2t queue and inserting to the r2t pool. Signed-off-by: Shlomo Pongratz <shlomop@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> [minor fix up to apply cleanly and compile fix] Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2014-02-07 14:41:38 +08:00
spin_unlock_bh(&session->frwd_lock);
mutex_unlock(&session->eh_mutex);
ISCSI_DBG_EH(session, "failing abort due to dropped "
"session.\n");
return FAILED;
}
scsi: libiscsi: Fix iscsi_task use after free() The following bug was reported and debugged by wubo40@huawei.com: When testing kernel 4.18 version, NULL pointer dereference problem occurs in iscsi_eh_cmd_timed_out() function. I think this bug in the upstream is still exists. The analysis reasons are as follows: 1) For some reason, I/O command did not complete within the timeout period. The block layer timer works, call scsi_times_out() to handle I/O timeout logic. At the same time the command just completes. 2) scsi_times_out() call iscsi_eh_cmd_timed_out() to process timeout logic. Although there is an NULL judgment for the task, the task has not been released yet now. 3) iscsi_complete_task() calls __iscsi_put_task(). The task reference count reaches zero, the conditions for free task is met, then iscsi_free_task() frees the task, and sets sc->SCp.ptr = NULL. After iscsi_eh_cmd_timed_out() passes the task judgment check, there can still be NULL dereference scenarios. CPU0 CPU3 |- scsi_times_out() |- iscsi_complete_task() | | |- iscsi_eh_cmd_timed_out() |- __iscsi_put_task() | | |- task=sc->SCp.ptr, task is not NUL, check passed |- iscsi_free_task(task) | | | |-> sc->SCp.ptr = NULL | | |- task is NULL now, NULL pointer dereference | | | \|/ \|/ Calltrace: [380751.840862] BUG: unable to handle kernel NULL pointer dereference at 0000000000000138 [380751.843709] PGD 0 P4D 0 [380751.844770] Oops: 0000 [#1] SMP PTI [380751.846283] CPU: 0 PID: 403 Comm: kworker/0:1H Kdump: loaded Tainted: G [380751.851467] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996) [380751.856521] Workqueue: kblockd blk_mq_timeout_work [380751.858527] RIP: 0010:iscsi_eh_cmd_timed_out+0x15e/0x2e0 [libiscsi] [380751.861129] Code: 83 ea 01 48 8d 74 d0 08 48 8b 10 48 8b 4a 50 48 85 c9 74 2c 48 39 d5 74 [380751.868811] RSP: 0018:ffffc1e280a5fd58 EFLAGS: 00010246 [380751.870978] RAX: ffff9fd1e84e15e0 RBX: ffff9fd1e84e6dd0 RCX: 0000000116acc580 [380751.873791] RDX: ffff9fd1f97a9400 RSI: ffff9fd1e84e1800 RDI: ffff9fd1e4d6d420 [380751.876059] RBP: ffff9fd1e4d49000 R08: 0000000116acc580 R09: 0000000116acc580 [380751.878284] R10: 0000000000000000 R11: 0000000000000000 R12: ffff9fd1e6e931e8 [380751.880500] R13: ffff9fd1e84e6ee0 R14: 0000000000000010 R15: 0000000000000003 [380751.882687] FS: 0000000000000000(0000) GS:ffff9fd1fac00000(0000) knlGS:0000000000000000 [380751.885236] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [380751.887059] CR2: 0000000000000138 CR3: 000000011860a001 CR4: 00000000003606f0 [380751.889308] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [380751.891523] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [380751.893738] Call Trace: [380751.894639] scsi_times_out+0x60/0x1c0 [380751.895861] blk_mq_check_expired+0x144/0x200 [380751.897302] ? __switch_to_asm+0x35/0x70 [380751.898551] blk_mq_queue_tag_busy_iter+0x195/0x2e0 [380751.900091] ? __blk_mq_requeue_request+0x100/0x100 [380751.901611] ? __switch_to_asm+0x41/0x70 [380751.902853] ? __blk_mq_requeue_request+0x100/0x100 [380751.904398] blk_mq_timeout_work+0x54/0x130 [380751.905740] process_one_work+0x195/0x390 [380751.907228] worker_thread+0x30/0x390 [380751.908713] ? process_one_work+0x390/0x390 [380751.910350] kthread+0x10d/0x130 [380751.911470] ? kthread_flush_work_fn+0x10/0x10 [380751.913007] ret_from_fork+0x35/0x40 crash> dis -l iscsi_eh_cmd_timed_out+0x15e xxxxx/drivers/scsi/libiscsi.c: 2062 1970 enum blk_eh_timer_return iscsi_eh_cmd_timed_out(struct scsi_cmnd *sc) { ... 1984 spin_lock_bh(&session->frwd_lock); 1985 task = (struct iscsi_task *)sc->SCp.ptr; 1986 if (!task) { 1987 /* 1988 * Raced with completion. Blk layer has taken ownership 1989 * so let timeout code complete it now. 1990 */ 1991 rc = BLK_EH_DONE; 1992 goto done; 1993 } ... 2052 for (i = 0; i < conn->session->cmds_max; i++) { 2053 running_task = conn->session->cmds[i]; 2054 if (!running_task->sc || running_task == task || 2055 running_task->state != ISCSI_TASK_RUNNING) 2056 continue; 2057 2058 /* 2059 * Only check if cmds started before this one have made 2060 * progress, or this could never fail 2061 */ 2062 if (time_after(running_task->sc->jiffies_at_alloc, 2063 task->sc->jiffies_at_alloc)) <--- 2064 continue; 2065 ... } carsh> struct scsi_cmnd ffff9fd1e6e931e8 struct scsi_cmnd { ... SCp = { ptr = 0x0, <--- iscsi_task this_residual = 0, ... }, } To prevent this, we take a ref to the cmd under the back (completion) lock so if the completion side were to call iscsi_complete_task() on the task while the timer/eh paths are not holding the back_lock it will not be freed from under us. Note that this requires the previous patch, "scsi: libiscsi: Drop taskqueuelock" because bnx2i sleeps in its cleanup_task callout if the cmd is aborted. If the EH/timer and completion path are racing we don't know which path will do the last put. The previous patch moved the operations we needed to do under the forward lock to cleanup_queued_task. Once that has run we can drop the forward lock for the cmd and bnx2i no longer has to worry about if the EH, timer or completion path did the ast put and if the forward lock is held or not since it won't be. Link: https://lore.kernel.org/r/20210207044608.27585-4-michael.christie@oracle.com Reported-by: Wu Bo <wubo40@huawei.com> Reviewed-by: Lee Duncan <lduncan@suse.com> Signed-off-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-02-07 12:46:02 +08:00
spin_lock(&session->back_lock);
task = iscsi_cmd(sc)->task;
scsi: libiscsi: Fix iscsi_task use after free() The following bug was reported and debugged by wubo40@huawei.com: When testing kernel 4.18 version, NULL pointer dereference problem occurs in iscsi_eh_cmd_timed_out() function. I think this bug in the upstream is still exists. The analysis reasons are as follows: 1) For some reason, I/O command did not complete within the timeout period. The block layer timer works, call scsi_times_out() to handle I/O timeout logic. At the same time the command just completes. 2) scsi_times_out() call iscsi_eh_cmd_timed_out() to process timeout logic. Although there is an NULL judgment for the task, the task has not been released yet now. 3) iscsi_complete_task() calls __iscsi_put_task(). The task reference count reaches zero, the conditions for free task is met, then iscsi_free_task() frees the task, and sets sc->SCp.ptr = NULL. After iscsi_eh_cmd_timed_out() passes the task judgment check, there can still be NULL dereference scenarios. CPU0 CPU3 |- scsi_times_out() |- iscsi_complete_task() | | |- iscsi_eh_cmd_timed_out() |- __iscsi_put_task() | | |- task=sc->SCp.ptr, task is not NUL, check passed |- iscsi_free_task(task) | | | |-> sc->SCp.ptr = NULL | | |- task is NULL now, NULL pointer dereference | | | \|/ \|/ Calltrace: [380751.840862] BUG: unable to handle kernel NULL pointer dereference at 0000000000000138 [380751.843709] PGD 0 P4D 0 [380751.844770] Oops: 0000 [#1] SMP PTI [380751.846283] CPU: 0 PID: 403 Comm: kworker/0:1H Kdump: loaded Tainted: G [380751.851467] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996) [380751.856521] Workqueue: kblockd blk_mq_timeout_work [380751.858527] RIP: 0010:iscsi_eh_cmd_timed_out+0x15e/0x2e0 [libiscsi] [380751.861129] Code: 83 ea 01 48 8d 74 d0 08 48 8b 10 48 8b 4a 50 48 85 c9 74 2c 48 39 d5 74 [380751.868811] RSP: 0018:ffffc1e280a5fd58 EFLAGS: 00010246 [380751.870978] RAX: ffff9fd1e84e15e0 RBX: ffff9fd1e84e6dd0 RCX: 0000000116acc580 [380751.873791] RDX: ffff9fd1f97a9400 RSI: ffff9fd1e84e1800 RDI: ffff9fd1e4d6d420 [380751.876059] RBP: ffff9fd1e4d49000 R08: 0000000116acc580 R09: 0000000116acc580 [380751.878284] R10: 0000000000000000 R11: 0000000000000000 R12: ffff9fd1e6e931e8 [380751.880500] R13: ffff9fd1e84e6ee0 R14: 0000000000000010 R15: 0000000000000003 [380751.882687] FS: 0000000000000000(0000) GS:ffff9fd1fac00000(0000) knlGS:0000000000000000 [380751.885236] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [380751.887059] CR2: 0000000000000138 CR3: 000000011860a001 CR4: 00000000003606f0 [380751.889308] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [380751.891523] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [380751.893738] Call Trace: [380751.894639] scsi_times_out+0x60/0x1c0 [380751.895861] blk_mq_check_expired+0x144/0x200 [380751.897302] ? __switch_to_asm+0x35/0x70 [380751.898551] blk_mq_queue_tag_busy_iter+0x195/0x2e0 [380751.900091] ? __blk_mq_requeue_request+0x100/0x100 [380751.901611] ? __switch_to_asm+0x41/0x70 [380751.902853] ? __blk_mq_requeue_request+0x100/0x100 [380751.904398] blk_mq_timeout_work+0x54/0x130 [380751.905740] process_one_work+0x195/0x390 [380751.907228] worker_thread+0x30/0x390 [380751.908713] ? process_one_work+0x390/0x390 [380751.910350] kthread+0x10d/0x130 [380751.911470] ? kthread_flush_work_fn+0x10/0x10 [380751.913007] ret_from_fork+0x35/0x40 crash> dis -l iscsi_eh_cmd_timed_out+0x15e xxxxx/drivers/scsi/libiscsi.c: 2062 1970 enum blk_eh_timer_return iscsi_eh_cmd_timed_out(struct scsi_cmnd *sc) { ... 1984 spin_lock_bh(&session->frwd_lock); 1985 task = (struct iscsi_task *)sc->SCp.ptr; 1986 if (!task) { 1987 /* 1988 * Raced with completion. Blk layer has taken ownership 1989 * so let timeout code complete it now. 1990 */ 1991 rc = BLK_EH_DONE; 1992 goto done; 1993 } ... 2052 for (i = 0; i < conn->session->cmds_max; i++) { 2053 running_task = conn->session->cmds[i]; 2054 if (!running_task->sc || running_task == task || 2055 running_task->state != ISCSI_TASK_RUNNING) 2056 continue; 2057 2058 /* 2059 * Only check if cmds started before this one have made 2060 * progress, or this could never fail 2061 */ 2062 if (time_after(running_task->sc->jiffies_at_alloc, 2063 task->sc->jiffies_at_alloc)) <--- 2064 continue; 2065 ... } carsh> struct scsi_cmnd ffff9fd1e6e931e8 struct scsi_cmnd { ... SCp = { ptr = 0x0, <--- iscsi_task this_residual = 0, ... }, } To prevent this, we take a ref to the cmd under the back (completion) lock so if the completion side were to call iscsi_complete_task() on the task while the timer/eh paths are not holding the back_lock it will not be freed from under us. Note that this requires the previous patch, "scsi: libiscsi: Drop taskqueuelock" because bnx2i sleeps in its cleanup_task callout if the cmd is aborted. If the EH/timer and completion path are racing we don't know which path will do the last put. The previous patch moved the operations we needed to do under the forward lock to cleanup_queued_task. Once that has run we can drop the forward lock for the cmd and bnx2i no longer has to worry about if the EH, timer or completion path did the ast put and if the forward lock is held or not since it won't be. Link: https://lore.kernel.org/r/20210207044608.27585-4-michael.christie@oracle.com Reported-by: Wu Bo <wubo40@huawei.com> Reviewed-by: Lee Duncan <lduncan@suse.com> Signed-off-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-02-07 12:46:02 +08:00
if (!task || !task->sc) {
/* task completed before time out */
ISCSI_DBG_EH(session, "sc completed while abort in progress\n");
scsi: libiscsi: Fix iscsi_task use after free() The following bug was reported and debugged by wubo40@huawei.com: When testing kernel 4.18 version, NULL pointer dereference problem occurs in iscsi_eh_cmd_timed_out() function. I think this bug in the upstream is still exists. The analysis reasons are as follows: 1) For some reason, I/O command did not complete within the timeout period. The block layer timer works, call scsi_times_out() to handle I/O timeout logic. At the same time the command just completes. 2) scsi_times_out() call iscsi_eh_cmd_timed_out() to process timeout logic. Although there is an NULL judgment for the task, the task has not been released yet now. 3) iscsi_complete_task() calls __iscsi_put_task(). The task reference count reaches zero, the conditions for free task is met, then iscsi_free_task() frees the task, and sets sc->SCp.ptr = NULL. After iscsi_eh_cmd_timed_out() passes the task judgment check, there can still be NULL dereference scenarios. CPU0 CPU3 |- scsi_times_out() |- iscsi_complete_task() | | |- iscsi_eh_cmd_timed_out() |- __iscsi_put_task() | | |- task=sc->SCp.ptr, task is not NUL, check passed |- iscsi_free_task(task) | | | |-> sc->SCp.ptr = NULL | | |- task is NULL now, NULL pointer dereference | | | \|/ \|/ Calltrace: [380751.840862] BUG: unable to handle kernel NULL pointer dereference at 0000000000000138 [380751.843709] PGD 0 P4D 0 [380751.844770] Oops: 0000 [#1] SMP PTI [380751.846283] CPU: 0 PID: 403 Comm: kworker/0:1H Kdump: loaded Tainted: G [380751.851467] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996) [380751.856521] Workqueue: kblockd blk_mq_timeout_work [380751.858527] RIP: 0010:iscsi_eh_cmd_timed_out+0x15e/0x2e0 [libiscsi] [380751.861129] Code: 83 ea 01 48 8d 74 d0 08 48 8b 10 48 8b 4a 50 48 85 c9 74 2c 48 39 d5 74 [380751.868811] RSP: 0018:ffffc1e280a5fd58 EFLAGS: 00010246 [380751.870978] RAX: ffff9fd1e84e15e0 RBX: ffff9fd1e84e6dd0 RCX: 0000000116acc580 [380751.873791] RDX: ffff9fd1f97a9400 RSI: ffff9fd1e84e1800 RDI: ffff9fd1e4d6d420 [380751.876059] RBP: ffff9fd1e4d49000 R08: 0000000116acc580 R09: 0000000116acc580 [380751.878284] R10: 0000000000000000 R11: 0000000000000000 R12: ffff9fd1e6e931e8 [380751.880500] R13: ffff9fd1e84e6ee0 R14: 0000000000000010 R15: 0000000000000003 [380751.882687] FS: 0000000000000000(0000) GS:ffff9fd1fac00000(0000) knlGS:0000000000000000 [380751.885236] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [380751.887059] CR2: 0000000000000138 CR3: 000000011860a001 CR4: 00000000003606f0 [380751.889308] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [380751.891523] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [380751.893738] Call Trace: [380751.894639] scsi_times_out+0x60/0x1c0 [380751.895861] blk_mq_check_expired+0x144/0x200 [380751.897302] ? __switch_to_asm+0x35/0x70 [380751.898551] blk_mq_queue_tag_busy_iter+0x195/0x2e0 [380751.900091] ? __blk_mq_requeue_request+0x100/0x100 [380751.901611] ? __switch_to_asm+0x41/0x70 [380751.902853] ? __blk_mq_requeue_request+0x100/0x100 [380751.904398] blk_mq_timeout_work+0x54/0x130 [380751.905740] process_one_work+0x195/0x390 [380751.907228] worker_thread+0x30/0x390 [380751.908713] ? process_one_work+0x390/0x390 [380751.910350] kthread+0x10d/0x130 [380751.911470] ? kthread_flush_work_fn+0x10/0x10 [380751.913007] ret_from_fork+0x35/0x40 crash> dis -l iscsi_eh_cmd_timed_out+0x15e xxxxx/drivers/scsi/libiscsi.c: 2062 1970 enum blk_eh_timer_return iscsi_eh_cmd_timed_out(struct scsi_cmnd *sc) { ... 1984 spin_lock_bh(&session->frwd_lock); 1985 task = (struct iscsi_task *)sc->SCp.ptr; 1986 if (!task) { 1987 /* 1988 * Raced with completion. Blk layer has taken ownership 1989 * so let timeout code complete it now. 1990 */ 1991 rc = BLK_EH_DONE; 1992 goto done; 1993 } ... 2052 for (i = 0; i < conn->session->cmds_max; i++) { 2053 running_task = conn->session->cmds[i]; 2054 if (!running_task->sc || running_task == task || 2055 running_task->state != ISCSI_TASK_RUNNING) 2056 continue; 2057 2058 /* 2059 * Only check if cmds started before this one have made 2060 * progress, or this could never fail 2061 */ 2062 if (time_after(running_task->sc->jiffies_at_alloc, 2063 task->sc->jiffies_at_alloc)) <--- 2064 continue; 2065 ... } carsh> struct scsi_cmnd ffff9fd1e6e931e8 struct scsi_cmnd { ... SCp = { ptr = 0x0, <--- iscsi_task this_residual = 0, ... }, } To prevent this, we take a ref to the cmd under the back (completion) lock so if the completion side were to call iscsi_complete_task() on the task while the timer/eh paths are not holding the back_lock it will not be freed from under us. Note that this requires the previous patch, "scsi: libiscsi: Drop taskqueuelock" because bnx2i sleeps in its cleanup_task callout if the cmd is aborted. If the EH/timer and completion path are racing we don't know which path will do the last put. The previous patch moved the operations we needed to do under the forward lock to cleanup_queued_task. Once that has run we can drop the forward lock for the cmd and bnx2i no longer has to worry about if the EH, timer or completion path did the ast put and if the forward lock is held or not since it won't be. Link: https://lore.kernel.org/r/20210207044608.27585-4-michael.christie@oracle.com Reported-by: Wu Bo <wubo40@huawei.com> Reviewed-by: Lee Duncan <lduncan@suse.com> Signed-off-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-02-07 12:46:02 +08:00
spin_unlock(&session->back_lock);
spin_unlock_bh(&session->frwd_lock);
mutex_unlock(&session->eh_mutex);
return SUCCESS;
}
scsi: iscsi: Remove iscsi_get_task back_lock requirement We currently require that the back_lock is held when calling the functions that manipulate the iscsi_task refcount. The only reason for this is to handle races where we are handling SCSI-ml EH callbacks and the cmd is completing at the same time the normal completion path is running, and we can't return from the EH callback until the driver has stopped accessing the cmd. Holding the back_lock while also accessing the task->state made it simple to check that a cmd is completing and also get/put a refcount at the same time, and at the time we were not as concerned about performance. The problem is that we don't want to take the back_lock from the xmit path for normal I/O since it causes contention with the completion path if the user has chosen to try and split those paths on different CPUs (in this case abusing the CPUs and ignoring caching improves perf for some uses). Begins to remove the back_lock requirement for iscsi_get/put_task by removing the requirement for the get path. Instead of always holding the back_lock we detect if something has done the last put and is about to call iscsi_free_task(). A subsequent commit will then allow iSCSI code to do the last put on a task and only grab the back_lock if the refcount is now zero and it's going to call iscsi_free_task(). Link: https://lore.kernel.org/r/20220616224557.115234-8-michael.christie@oracle.com Reviewed-by: Lee Duncan <lduncan@suse.com> Signed-off-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-06-17 06:45:55 +08:00
if (!iscsi_get_task(task)) {
spin_unlock(&session->back_lock);
spin_unlock_bh(&session->frwd_lock);
mutex_unlock(&session->eh_mutex);
/* We are just about to call iscsi_free_task so wait for it. */
udelay(ISCSI_CMD_COMPL_WAIT);
goto completion_check;
}
ISCSI_DBG_EH(session, "aborting [sc %p itt 0x%x]\n", sc, task->itt);
conn = session->leadconn;
iscsi_get_conn(conn->cls_conn);
conn->eh_abort_cnt++;
age = session->age;
scsi: libiscsi: Fix iscsi_task use after free() The following bug was reported and debugged by wubo40@huawei.com: When testing kernel 4.18 version, NULL pointer dereference problem occurs in iscsi_eh_cmd_timed_out() function. I think this bug in the upstream is still exists. The analysis reasons are as follows: 1) For some reason, I/O command did not complete within the timeout period. The block layer timer works, call scsi_times_out() to handle I/O timeout logic. At the same time the command just completes. 2) scsi_times_out() call iscsi_eh_cmd_timed_out() to process timeout logic. Although there is an NULL judgment for the task, the task has not been released yet now. 3) iscsi_complete_task() calls __iscsi_put_task(). The task reference count reaches zero, the conditions for free task is met, then iscsi_free_task() frees the task, and sets sc->SCp.ptr = NULL. After iscsi_eh_cmd_timed_out() passes the task judgment check, there can still be NULL dereference scenarios. CPU0 CPU3 |- scsi_times_out() |- iscsi_complete_task() | | |- iscsi_eh_cmd_timed_out() |- __iscsi_put_task() | | |- task=sc->SCp.ptr, task is not NUL, check passed |- iscsi_free_task(task) | | | |-> sc->SCp.ptr = NULL | | |- task is NULL now, NULL pointer dereference | | | \|/ \|/ Calltrace: [380751.840862] BUG: unable to handle kernel NULL pointer dereference at 0000000000000138 [380751.843709] PGD 0 P4D 0 [380751.844770] Oops: 0000 [#1] SMP PTI [380751.846283] CPU: 0 PID: 403 Comm: kworker/0:1H Kdump: loaded Tainted: G [380751.851467] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996) [380751.856521] Workqueue: kblockd blk_mq_timeout_work [380751.858527] RIP: 0010:iscsi_eh_cmd_timed_out+0x15e/0x2e0 [libiscsi] [380751.861129] Code: 83 ea 01 48 8d 74 d0 08 48 8b 10 48 8b 4a 50 48 85 c9 74 2c 48 39 d5 74 [380751.868811] RSP: 0018:ffffc1e280a5fd58 EFLAGS: 00010246 [380751.870978] RAX: ffff9fd1e84e15e0 RBX: ffff9fd1e84e6dd0 RCX: 0000000116acc580 [380751.873791] RDX: ffff9fd1f97a9400 RSI: ffff9fd1e84e1800 RDI: ffff9fd1e4d6d420 [380751.876059] RBP: ffff9fd1e4d49000 R08: 0000000116acc580 R09: 0000000116acc580 [380751.878284] R10: 0000000000000000 R11: 0000000000000000 R12: ffff9fd1e6e931e8 [380751.880500] R13: ffff9fd1e84e6ee0 R14: 0000000000000010 R15: 0000000000000003 [380751.882687] FS: 0000000000000000(0000) GS:ffff9fd1fac00000(0000) knlGS:0000000000000000 [380751.885236] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [380751.887059] CR2: 0000000000000138 CR3: 000000011860a001 CR4: 00000000003606f0 [380751.889308] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [380751.891523] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [380751.893738] Call Trace: [380751.894639] scsi_times_out+0x60/0x1c0 [380751.895861] blk_mq_check_expired+0x144/0x200 [380751.897302] ? __switch_to_asm+0x35/0x70 [380751.898551] blk_mq_queue_tag_busy_iter+0x195/0x2e0 [380751.900091] ? __blk_mq_requeue_request+0x100/0x100 [380751.901611] ? __switch_to_asm+0x41/0x70 [380751.902853] ? __blk_mq_requeue_request+0x100/0x100 [380751.904398] blk_mq_timeout_work+0x54/0x130 [380751.905740] process_one_work+0x195/0x390 [380751.907228] worker_thread+0x30/0x390 [380751.908713] ? process_one_work+0x390/0x390 [380751.910350] kthread+0x10d/0x130 [380751.911470] ? kthread_flush_work_fn+0x10/0x10 [380751.913007] ret_from_fork+0x35/0x40 crash> dis -l iscsi_eh_cmd_timed_out+0x15e xxxxx/drivers/scsi/libiscsi.c: 2062 1970 enum blk_eh_timer_return iscsi_eh_cmd_timed_out(struct scsi_cmnd *sc) { ... 1984 spin_lock_bh(&session->frwd_lock); 1985 task = (struct iscsi_task *)sc->SCp.ptr; 1986 if (!task) { 1987 /* 1988 * Raced with completion. Blk layer has taken ownership 1989 * so let timeout code complete it now. 1990 */ 1991 rc = BLK_EH_DONE; 1992 goto done; 1993 } ... 2052 for (i = 0; i < conn->session->cmds_max; i++) { 2053 running_task = conn->session->cmds[i]; 2054 if (!running_task->sc || running_task == task || 2055 running_task->state != ISCSI_TASK_RUNNING) 2056 continue; 2057 2058 /* 2059 * Only check if cmds started before this one have made 2060 * progress, or this could never fail 2061 */ 2062 if (time_after(running_task->sc->jiffies_at_alloc, 2063 task->sc->jiffies_at_alloc)) <--- 2064 continue; 2065 ... } carsh> struct scsi_cmnd ffff9fd1e6e931e8 struct scsi_cmnd { ... SCp = { ptr = 0x0, <--- iscsi_task this_residual = 0, ... }, } To prevent this, we take a ref to the cmd under the back (completion) lock so if the completion side were to call iscsi_complete_task() on the task while the timer/eh paths are not holding the back_lock it will not be freed from under us. Note that this requires the previous patch, "scsi: libiscsi: Drop taskqueuelock" because bnx2i sleeps in its cleanup_task callout if the cmd is aborted. If the EH/timer and completion path are racing we don't know which path will do the last put. The previous patch moved the operations we needed to do under the forward lock to cleanup_queued_task. Once that has run we can drop the forward lock for the cmd and bnx2i no longer has to worry about if the EH, timer or completion path did the ast put and if the forward lock is held or not since it won't be. Link: https://lore.kernel.org/r/20210207044608.27585-4-michael.christie@oracle.com Reported-by: Wu Bo <wubo40@huawei.com> Reviewed-by: Lee Duncan <lduncan@suse.com> Signed-off-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-02-07 12:46:02 +08:00
spin_unlock(&session->back_lock);
if (task->state == ISCSI_TASK_PENDING) {
fail_scsi_task(task, DID_ABORT);
goto success;
}
/* only have one tmf outstanding at a time */
if (session->tmf_state != TMF_INITIAL)
goto failed;
session->tmf_state = TMF_QUEUED;
hdr = &session->tmhdr;
iscsi_prep_abort_task_pdu(task, hdr);
if (iscsi_exec_task_mgmt_fn(conn, hdr, age, session->abort_timeout))
goto failed;
switch (session->tmf_state) {
case TMF_SUCCESS:
[SCSI] libiscsi: Reduce locking contention in fast path Replace the session lock with two locks, a forward lock and a backwards lock named frwd_lock and back_lock respectively. The forward lock protects resources that change while sending a request to the target, such as cmdsn, queued_cmdsn, and allocating task from the commands' pool with kfifo_out. The backward lock protects resources that change while processing a response or in error path, such as cmdsn_exp, cmdsn_max, and returning tasks to the commands' pool with kfifo_in. Under a steady state fast-path situation, that is when one or more processes/threads submit IO to an iscsi device and a single kernel upcall (e.g softirq) is dealing with processing of responses without errors, this patch eliminates the contention between the queuecommand()/request response/scsi_done() flows associated with iscsi sessions. Between the forward and the backward locks exists a strict locking hierarchy. The mutual exclusion zone protected by the forward lock can enclose the mutual exclusion zone protected by the backward lock but not vice versa. For example, in iscsi_conn_teardown or in iscsi_xmit_data when there is a failure and __iscsi_put_task is called, the backward lock is taken while the forward lock is still taken. On the other hand, if in the RX path a nop is to be sent, for example in iscsi_handle_reject or __iscsi_complete_pdu than the forward lock is released and the backward lock is taken for the duration of iscsi_send_nopout, later the backward lock is released and the forward lock is retaken. libiscsi_tcp uses two kernel fifos the r2t pool and the r2t queue. The insertion and deletion from these queues didn't corespond to the assumption taken by the new forward/backwards session locking paradigm. That is, in iscsi_tcp_clenup_task which belongs to the RX (backwards) path, r2t is taken out from r2t queue and inserted to the r2t pool. In iscsi_tcp_get_curr_r2t which belong to the TX (forward) path, r2t is also inserted to the r2t pool and another r2t is pulled from r2t queue. Only in iscsi_tcp_r2t_rsp which is called in the RX path but can requeue to the TX path, r2t is taken from the r2t pool and inserted to the r2t queue. In order to cope with this situation, two spin locks were added, pool2queue and queue2pool. The former protects extracting from the r2t pool and inserting to the r2t queue, and the later protects the extracing from the r2t queue and inserting to the r2t pool. Signed-off-by: Shlomo Pongratz <shlomop@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> [minor fix up to apply cleanly and compile fix] Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2014-02-07 14:41:38 +08:00
spin_unlock_bh(&session->frwd_lock);
/*
* stop tx side incase the target had sent a abort rsp but
* the initiator was still writing out data.
*/
iscsi_suspend_tx(conn);
/*
* we do not stop the recv side because targets have been
* good and have never sent us a successful tmf response
* then sent more data for the cmd.
*/
[SCSI] libiscsi: Reduce locking contention in fast path Replace the session lock with two locks, a forward lock and a backwards lock named frwd_lock and back_lock respectively. The forward lock protects resources that change while sending a request to the target, such as cmdsn, queued_cmdsn, and allocating task from the commands' pool with kfifo_out. The backward lock protects resources that change while processing a response or in error path, such as cmdsn_exp, cmdsn_max, and returning tasks to the commands' pool with kfifo_in. Under a steady state fast-path situation, that is when one or more processes/threads submit IO to an iscsi device and a single kernel upcall (e.g softirq) is dealing with processing of responses without errors, this patch eliminates the contention between the queuecommand()/request response/scsi_done() flows associated with iscsi sessions. Between the forward and the backward locks exists a strict locking hierarchy. The mutual exclusion zone protected by the forward lock can enclose the mutual exclusion zone protected by the backward lock but not vice versa. For example, in iscsi_conn_teardown or in iscsi_xmit_data when there is a failure and __iscsi_put_task is called, the backward lock is taken while the forward lock is still taken. On the other hand, if in the RX path a nop is to be sent, for example in iscsi_handle_reject or __iscsi_complete_pdu than the forward lock is released and the backward lock is taken for the duration of iscsi_send_nopout, later the backward lock is released and the forward lock is retaken. libiscsi_tcp uses two kernel fifos the r2t pool and the r2t queue. The insertion and deletion from these queues didn't corespond to the assumption taken by the new forward/backwards session locking paradigm. That is, in iscsi_tcp_clenup_task which belongs to the RX (backwards) path, r2t is taken out from r2t queue and inserted to the r2t pool. In iscsi_tcp_get_curr_r2t which belong to the TX (forward) path, r2t is also inserted to the r2t pool and another r2t is pulled from r2t queue. Only in iscsi_tcp_r2t_rsp which is called in the RX path but can requeue to the TX path, r2t is taken from the r2t pool and inserted to the r2t queue. In order to cope with this situation, two spin locks were added, pool2queue and queue2pool. The former protects extracting from the r2t pool and inserting to the r2t queue, and the later protects the extracing from the r2t queue and inserting to the r2t pool. Signed-off-by: Shlomo Pongratz <shlomop@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> [minor fix up to apply cleanly and compile fix] Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2014-02-07 14:41:38 +08:00
spin_lock_bh(&session->frwd_lock);
fail_scsi_task(task, DID_ABORT);
session->tmf_state = TMF_INITIAL;
memset(hdr, 0, sizeof(*hdr));
[SCSI] libiscsi: Reduce locking contention in fast path Replace the session lock with two locks, a forward lock and a backwards lock named frwd_lock and back_lock respectively. The forward lock protects resources that change while sending a request to the target, such as cmdsn, queued_cmdsn, and allocating task from the commands' pool with kfifo_out. The backward lock protects resources that change while processing a response or in error path, such as cmdsn_exp, cmdsn_max, and returning tasks to the commands' pool with kfifo_in. Under a steady state fast-path situation, that is when one or more processes/threads submit IO to an iscsi device and a single kernel upcall (e.g softirq) is dealing with processing of responses without errors, this patch eliminates the contention between the queuecommand()/request response/scsi_done() flows associated with iscsi sessions. Between the forward and the backward locks exists a strict locking hierarchy. The mutual exclusion zone protected by the forward lock can enclose the mutual exclusion zone protected by the backward lock but not vice versa. For example, in iscsi_conn_teardown or in iscsi_xmit_data when there is a failure and __iscsi_put_task is called, the backward lock is taken while the forward lock is still taken. On the other hand, if in the RX path a nop is to be sent, for example in iscsi_handle_reject or __iscsi_complete_pdu than the forward lock is released and the backward lock is taken for the duration of iscsi_send_nopout, later the backward lock is released and the forward lock is retaken. libiscsi_tcp uses two kernel fifos the r2t pool and the r2t queue. The insertion and deletion from these queues didn't corespond to the assumption taken by the new forward/backwards session locking paradigm. That is, in iscsi_tcp_clenup_task which belongs to the RX (backwards) path, r2t is taken out from r2t queue and inserted to the r2t pool. In iscsi_tcp_get_curr_r2t which belong to the TX (forward) path, r2t is also inserted to the r2t pool and another r2t is pulled from r2t queue. Only in iscsi_tcp_r2t_rsp which is called in the RX path but can requeue to the TX path, r2t is taken from the r2t pool and inserted to the r2t queue. In order to cope with this situation, two spin locks were added, pool2queue and queue2pool. The former protects extracting from the r2t pool and inserting to the r2t queue, and the later protects the extracing from the r2t queue and inserting to the r2t pool. Signed-off-by: Shlomo Pongratz <shlomop@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> [minor fix up to apply cleanly and compile fix] Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2014-02-07 14:41:38 +08:00
spin_unlock_bh(&session->frwd_lock);
iscsi_start_tx(conn);
goto success_unlocked;
case TMF_TIMEDOUT:
session->running_aborted_task = task;
[SCSI] libiscsi: Reduce locking contention in fast path Replace the session lock with two locks, a forward lock and a backwards lock named frwd_lock and back_lock respectively. The forward lock protects resources that change while sending a request to the target, such as cmdsn, queued_cmdsn, and allocating task from the commands' pool with kfifo_out. The backward lock protects resources that change while processing a response or in error path, such as cmdsn_exp, cmdsn_max, and returning tasks to the commands' pool with kfifo_in. Under a steady state fast-path situation, that is when one or more processes/threads submit IO to an iscsi device and a single kernel upcall (e.g softirq) is dealing with processing of responses without errors, this patch eliminates the contention between the queuecommand()/request response/scsi_done() flows associated with iscsi sessions. Between the forward and the backward locks exists a strict locking hierarchy. The mutual exclusion zone protected by the forward lock can enclose the mutual exclusion zone protected by the backward lock but not vice versa. For example, in iscsi_conn_teardown or in iscsi_xmit_data when there is a failure and __iscsi_put_task is called, the backward lock is taken while the forward lock is still taken. On the other hand, if in the RX path a nop is to be sent, for example in iscsi_handle_reject or __iscsi_complete_pdu than the forward lock is released and the backward lock is taken for the duration of iscsi_send_nopout, later the backward lock is released and the forward lock is retaken. libiscsi_tcp uses two kernel fifos the r2t pool and the r2t queue. The insertion and deletion from these queues didn't corespond to the assumption taken by the new forward/backwards session locking paradigm. That is, in iscsi_tcp_clenup_task which belongs to the RX (backwards) path, r2t is taken out from r2t queue and inserted to the r2t pool. In iscsi_tcp_get_curr_r2t which belong to the TX (forward) path, r2t is also inserted to the r2t pool and another r2t is pulled from r2t queue. Only in iscsi_tcp_r2t_rsp which is called in the RX path but can requeue to the TX path, r2t is taken from the r2t pool and inserted to the r2t queue. In order to cope with this situation, two spin locks were added, pool2queue and queue2pool. The former protects extracting from the r2t pool and inserting to the r2t queue, and the later protects the extracing from the r2t queue and inserting to the r2t pool. Signed-off-by: Shlomo Pongratz <shlomop@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> [minor fix up to apply cleanly and compile fix] Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2014-02-07 14:41:38 +08:00
spin_unlock_bh(&session->frwd_lock);
iscsi_conn_failure(conn, ISCSI_ERR_SCSI_EH_SESSION_RST);
goto failed_unlocked;
case TMF_NOT_FOUND:
if (iscsi_task_is_completed(task)) {
session->tmf_state = TMF_INITIAL;
memset(hdr, 0, sizeof(*hdr));
/* task completed before tmf abort response */
ISCSI_DBG_EH(session, "sc completed while abort in "
"progress\n");
goto success;
}
fallthrough;
default:
session->tmf_state = TMF_INITIAL;
goto failed;
}
success:
[SCSI] libiscsi: Reduce locking contention in fast path Replace the session lock with two locks, a forward lock and a backwards lock named frwd_lock and back_lock respectively. The forward lock protects resources that change while sending a request to the target, such as cmdsn, queued_cmdsn, and allocating task from the commands' pool with kfifo_out. The backward lock protects resources that change while processing a response or in error path, such as cmdsn_exp, cmdsn_max, and returning tasks to the commands' pool with kfifo_in. Under a steady state fast-path situation, that is when one or more processes/threads submit IO to an iscsi device and a single kernel upcall (e.g softirq) is dealing with processing of responses without errors, this patch eliminates the contention between the queuecommand()/request response/scsi_done() flows associated with iscsi sessions. Between the forward and the backward locks exists a strict locking hierarchy. The mutual exclusion zone protected by the forward lock can enclose the mutual exclusion zone protected by the backward lock but not vice versa. For example, in iscsi_conn_teardown or in iscsi_xmit_data when there is a failure and __iscsi_put_task is called, the backward lock is taken while the forward lock is still taken. On the other hand, if in the RX path a nop is to be sent, for example in iscsi_handle_reject or __iscsi_complete_pdu than the forward lock is released and the backward lock is taken for the duration of iscsi_send_nopout, later the backward lock is released and the forward lock is retaken. libiscsi_tcp uses two kernel fifos the r2t pool and the r2t queue. The insertion and deletion from these queues didn't corespond to the assumption taken by the new forward/backwards session locking paradigm. That is, in iscsi_tcp_clenup_task which belongs to the RX (backwards) path, r2t is taken out from r2t queue and inserted to the r2t pool. In iscsi_tcp_get_curr_r2t which belong to the TX (forward) path, r2t is also inserted to the r2t pool and another r2t is pulled from r2t queue. Only in iscsi_tcp_r2t_rsp which is called in the RX path but can requeue to the TX path, r2t is taken from the r2t pool and inserted to the r2t queue. In order to cope with this situation, two spin locks were added, pool2queue and queue2pool. The former protects extracting from the r2t pool and inserting to the r2t queue, and the later protects the extracing from the r2t queue and inserting to the r2t pool. Signed-off-by: Shlomo Pongratz <shlomop@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> [minor fix up to apply cleanly and compile fix] Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2014-02-07 14:41:38 +08:00
spin_unlock_bh(&session->frwd_lock);
success_unlocked:
ISCSI_DBG_EH(session, "abort success [sc %p itt 0x%x]\n",
sc, task->itt);
scsi: libiscsi: Fix iscsi_task use after free() The following bug was reported and debugged by wubo40@huawei.com: When testing kernel 4.18 version, NULL pointer dereference problem occurs in iscsi_eh_cmd_timed_out() function. I think this bug in the upstream is still exists. The analysis reasons are as follows: 1) For some reason, I/O command did not complete within the timeout period. The block layer timer works, call scsi_times_out() to handle I/O timeout logic. At the same time the command just completes. 2) scsi_times_out() call iscsi_eh_cmd_timed_out() to process timeout logic. Although there is an NULL judgment for the task, the task has not been released yet now. 3) iscsi_complete_task() calls __iscsi_put_task(). The task reference count reaches zero, the conditions for free task is met, then iscsi_free_task() frees the task, and sets sc->SCp.ptr = NULL. After iscsi_eh_cmd_timed_out() passes the task judgment check, there can still be NULL dereference scenarios. CPU0 CPU3 |- scsi_times_out() |- iscsi_complete_task() | | |- iscsi_eh_cmd_timed_out() |- __iscsi_put_task() | | |- task=sc->SCp.ptr, task is not NUL, check passed |- iscsi_free_task(task) | | | |-> sc->SCp.ptr = NULL | | |- task is NULL now, NULL pointer dereference | | | \|/ \|/ Calltrace: [380751.840862] BUG: unable to handle kernel NULL pointer dereference at 0000000000000138 [380751.843709] PGD 0 P4D 0 [380751.844770] Oops: 0000 [#1] SMP PTI [380751.846283] CPU: 0 PID: 403 Comm: kworker/0:1H Kdump: loaded Tainted: G [380751.851467] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996) [380751.856521] Workqueue: kblockd blk_mq_timeout_work [380751.858527] RIP: 0010:iscsi_eh_cmd_timed_out+0x15e/0x2e0 [libiscsi] [380751.861129] Code: 83 ea 01 48 8d 74 d0 08 48 8b 10 48 8b 4a 50 48 85 c9 74 2c 48 39 d5 74 [380751.868811] RSP: 0018:ffffc1e280a5fd58 EFLAGS: 00010246 [380751.870978] RAX: ffff9fd1e84e15e0 RBX: ffff9fd1e84e6dd0 RCX: 0000000116acc580 [380751.873791] RDX: ffff9fd1f97a9400 RSI: ffff9fd1e84e1800 RDI: ffff9fd1e4d6d420 [380751.876059] RBP: ffff9fd1e4d49000 R08: 0000000116acc580 R09: 0000000116acc580 [380751.878284] R10: 0000000000000000 R11: 0000000000000000 R12: ffff9fd1e6e931e8 [380751.880500] R13: ffff9fd1e84e6ee0 R14: 0000000000000010 R15: 0000000000000003 [380751.882687] FS: 0000000000000000(0000) GS:ffff9fd1fac00000(0000) knlGS:0000000000000000 [380751.885236] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [380751.887059] CR2: 0000000000000138 CR3: 000000011860a001 CR4: 00000000003606f0 [380751.889308] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [380751.891523] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [380751.893738] Call Trace: [380751.894639] scsi_times_out+0x60/0x1c0 [380751.895861] blk_mq_check_expired+0x144/0x200 [380751.897302] ? __switch_to_asm+0x35/0x70 [380751.898551] blk_mq_queue_tag_busy_iter+0x195/0x2e0 [380751.900091] ? __blk_mq_requeue_request+0x100/0x100 [380751.901611] ? __switch_to_asm+0x41/0x70 [380751.902853] ? __blk_mq_requeue_request+0x100/0x100 [380751.904398] blk_mq_timeout_work+0x54/0x130 [380751.905740] process_one_work+0x195/0x390 [380751.907228] worker_thread+0x30/0x390 [380751.908713] ? process_one_work+0x390/0x390 [380751.910350] kthread+0x10d/0x130 [380751.911470] ? kthread_flush_work_fn+0x10/0x10 [380751.913007] ret_from_fork+0x35/0x40 crash> dis -l iscsi_eh_cmd_timed_out+0x15e xxxxx/drivers/scsi/libiscsi.c: 2062 1970 enum blk_eh_timer_return iscsi_eh_cmd_timed_out(struct scsi_cmnd *sc) { ... 1984 spin_lock_bh(&session->frwd_lock); 1985 task = (struct iscsi_task *)sc->SCp.ptr; 1986 if (!task) { 1987 /* 1988 * Raced with completion. Blk layer has taken ownership 1989 * so let timeout code complete it now. 1990 */ 1991 rc = BLK_EH_DONE; 1992 goto done; 1993 } ... 2052 for (i = 0; i < conn->session->cmds_max; i++) { 2053 running_task = conn->session->cmds[i]; 2054 if (!running_task->sc || running_task == task || 2055 running_task->state != ISCSI_TASK_RUNNING) 2056 continue; 2057 2058 /* 2059 * Only check if cmds started before this one have made 2060 * progress, or this could never fail 2061 */ 2062 if (time_after(running_task->sc->jiffies_at_alloc, 2063 task->sc->jiffies_at_alloc)) <--- 2064 continue; 2065 ... } carsh> struct scsi_cmnd ffff9fd1e6e931e8 struct scsi_cmnd { ... SCp = { ptr = 0x0, <--- iscsi_task this_residual = 0, ... }, } To prevent this, we take a ref to the cmd under the back (completion) lock so if the completion side were to call iscsi_complete_task() on the task while the timer/eh paths are not holding the back_lock it will not be freed from under us. Note that this requires the previous patch, "scsi: libiscsi: Drop taskqueuelock" because bnx2i sleeps in its cleanup_task callout if the cmd is aborted. If the EH/timer and completion path are racing we don't know which path will do the last put. The previous patch moved the operations we needed to do under the forward lock to cleanup_queued_task. Once that has run we can drop the forward lock for the cmd and bnx2i no longer has to worry about if the EH, timer or completion path did the ast put and if the forward lock is held or not since it won't be. Link: https://lore.kernel.org/r/20210207044608.27585-4-michael.christie@oracle.com Reported-by: Wu Bo <wubo40@huawei.com> Reviewed-by: Lee Duncan <lduncan@suse.com> Signed-off-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-02-07 12:46:02 +08:00
iscsi_put_task(task);
iscsi_put_conn(conn->cls_conn);
mutex_unlock(&session->eh_mutex);
return SUCCESS;
failed:
[SCSI] libiscsi: Reduce locking contention in fast path Replace the session lock with two locks, a forward lock and a backwards lock named frwd_lock and back_lock respectively. The forward lock protects resources that change while sending a request to the target, such as cmdsn, queued_cmdsn, and allocating task from the commands' pool with kfifo_out. The backward lock protects resources that change while processing a response or in error path, such as cmdsn_exp, cmdsn_max, and returning tasks to the commands' pool with kfifo_in. Under a steady state fast-path situation, that is when one or more processes/threads submit IO to an iscsi device and a single kernel upcall (e.g softirq) is dealing with processing of responses without errors, this patch eliminates the contention between the queuecommand()/request response/scsi_done() flows associated with iscsi sessions. Between the forward and the backward locks exists a strict locking hierarchy. The mutual exclusion zone protected by the forward lock can enclose the mutual exclusion zone protected by the backward lock but not vice versa. For example, in iscsi_conn_teardown or in iscsi_xmit_data when there is a failure and __iscsi_put_task is called, the backward lock is taken while the forward lock is still taken. On the other hand, if in the RX path a nop is to be sent, for example in iscsi_handle_reject or __iscsi_complete_pdu than the forward lock is released and the backward lock is taken for the duration of iscsi_send_nopout, later the backward lock is released and the forward lock is retaken. libiscsi_tcp uses two kernel fifos the r2t pool and the r2t queue. The insertion and deletion from these queues didn't corespond to the assumption taken by the new forward/backwards session locking paradigm. That is, in iscsi_tcp_clenup_task which belongs to the RX (backwards) path, r2t is taken out from r2t queue and inserted to the r2t pool. In iscsi_tcp_get_curr_r2t which belong to the TX (forward) path, r2t is also inserted to the r2t pool and another r2t is pulled from r2t queue. Only in iscsi_tcp_r2t_rsp which is called in the RX path but can requeue to the TX path, r2t is taken from the r2t pool and inserted to the r2t queue. In order to cope with this situation, two spin locks were added, pool2queue and queue2pool. The former protects extracting from the r2t pool and inserting to the r2t queue, and the later protects the extracing from the r2t queue and inserting to the r2t pool. Signed-off-by: Shlomo Pongratz <shlomop@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> [minor fix up to apply cleanly and compile fix] Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2014-02-07 14:41:38 +08:00
spin_unlock_bh(&session->frwd_lock);
failed_unlocked:
ISCSI_DBG_EH(session, "abort failed [sc %p itt 0x%x]\n", sc,
task ? task->itt : 0);
/*
* The driver might be accessing the task so hold the ref. The conn
* stop cleanup will drop the ref after ep_disconnect so we know the
* driver's no longer touching the task.
*/
if (!session->running_aborted_task)
iscsi_put_task(task);
iscsi_put_conn(conn->cls_conn);
mutex_unlock(&session->eh_mutex);
return FAILED;
}
EXPORT_SYMBOL_GPL(iscsi_eh_abort);
static void iscsi_prep_lun_reset_pdu(struct scsi_cmnd *sc, struct iscsi_tm *hdr)
{
memset(hdr, 0, sizeof(*hdr));
hdr->opcode = ISCSI_OP_SCSI_TMFUNC | ISCSI_OP_IMMEDIATE;
hdr->flags = ISCSI_TM_FUNC_LOGICAL_UNIT_RESET & ISCSI_FLAG_TM_FUNC_MASK;
hdr->flags |= ISCSI_FLAG_CMD_FINAL;
int_to_scsilun(sc->device->lun, &hdr->lun);
hdr->rtt = RESERVED_ITT;
}
int iscsi_eh_device_reset(struct scsi_cmnd *sc)
{
struct iscsi_cls_session *cls_session;
struct iscsi_session *session;
struct iscsi_conn *conn;
struct iscsi_tm *hdr;
int rc = FAILED;
cls_session = starget_to_session(scsi_target(sc->device));
session = cls_session->dd_data;
ISCSI_DBG_EH(session, "LU Reset [sc %p lun %llu]\n", sc,
sc->device->lun);
mutex_lock(&session->eh_mutex);
[SCSI] libiscsi: Reduce locking contention in fast path Replace the session lock with two locks, a forward lock and a backwards lock named frwd_lock and back_lock respectively. The forward lock protects resources that change while sending a request to the target, such as cmdsn, queued_cmdsn, and allocating task from the commands' pool with kfifo_out. The backward lock protects resources that change while processing a response or in error path, such as cmdsn_exp, cmdsn_max, and returning tasks to the commands' pool with kfifo_in. Under a steady state fast-path situation, that is when one or more processes/threads submit IO to an iscsi device and a single kernel upcall (e.g softirq) is dealing with processing of responses without errors, this patch eliminates the contention between the queuecommand()/request response/scsi_done() flows associated with iscsi sessions. Between the forward and the backward locks exists a strict locking hierarchy. The mutual exclusion zone protected by the forward lock can enclose the mutual exclusion zone protected by the backward lock but not vice versa. For example, in iscsi_conn_teardown or in iscsi_xmit_data when there is a failure and __iscsi_put_task is called, the backward lock is taken while the forward lock is still taken. On the other hand, if in the RX path a nop is to be sent, for example in iscsi_handle_reject or __iscsi_complete_pdu than the forward lock is released and the backward lock is taken for the duration of iscsi_send_nopout, later the backward lock is released and the forward lock is retaken. libiscsi_tcp uses two kernel fifos the r2t pool and the r2t queue. The insertion and deletion from these queues didn't corespond to the assumption taken by the new forward/backwards session locking paradigm. That is, in iscsi_tcp_clenup_task which belongs to the RX (backwards) path, r2t is taken out from r2t queue and inserted to the r2t pool. In iscsi_tcp_get_curr_r2t which belong to the TX (forward) path, r2t is also inserted to the r2t pool and another r2t is pulled from r2t queue. Only in iscsi_tcp_r2t_rsp which is called in the RX path but can requeue to the TX path, r2t is taken from the r2t pool and inserted to the r2t queue. In order to cope with this situation, two spin locks were added, pool2queue and queue2pool. The former protects extracting from the r2t pool and inserting to the r2t queue, and the later protects the extracing from the r2t queue and inserting to the r2t pool. Signed-off-by: Shlomo Pongratz <shlomop@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> [minor fix up to apply cleanly and compile fix] Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2014-02-07 14:41:38 +08:00
spin_lock_bh(&session->frwd_lock);
/*
* Just check if we are not logged in. We cannot check for
* the phase because the reset could come from a ioctl.
*/
if (!session->leadconn || session->state != ISCSI_STATE_LOGGED_IN)
goto unlock;
conn = session->leadconn;
/* only have one tmf outstanding at a time */
if (session->tmf_state != TMF_INITIAL)
goto unlock;
session->tmf_state = TMF_QUEUED;
hdr = &session->tmhdr;
iscsi_prep_lun_reset_pdu(sc, hdr);
if (iscsi_exec_task_mgmt_fn(conn, hdr, session->age,
session->lu_reset_timeout)) {
rc = FAILED;
goto unlock;
}
switch (session->tmf_state) {
case TMF_SUCCESS:
break;
case TMF_TIMEDOUT:
[SCSI] libiscsi: Reduce locking contention in fast path Replace the session lock with two locks, a forward lock and a backwards lock named frwd_lock and back_lock respectively. The forward lock protects resources that change while sending a request to the target, such as cmdsn, queued_cmdsn, and allocating task from the commands' pool with kfifo_out. The backward lock protects resources that change while processing a response or in error path, such as cmdsn_exp, cmdsn_max, and returning tasks to the commands' pool with kfifo_in. Under a steady state fast-path situation, that is when one or more processes/threads submit IO to an iscsi device and a single kernel upcall (e.g softirq) is dealing with processing of responses without errors, this patch eliminates the contention between the queuecommand()/request response/scsi_done() flows associated with iscsi sessions. Between the forward and the backward locks exists a strict locking hierarchy. The mutual exclusion zone protected by the forward lock can enclose the mutual exclusion zone protected by the backward lock but not vice versa. For example, in iscsi_conn_teardown or in iscsi_xmit_data when there is a failure and __iscsi_put_task is called, the backward lock is taken while the forward lock is still taken. On the other hand, if in the RX path a nop is to be sent, for example in iscsi_handle_reject or __iscsi_complete_pdu than the forward lock is released and the backward lock is taken for the duration of iscsi_send_nopout, later the backward lock is released and the forward lock is retaken. libiscsi_tcp uses two kernel fifos the r2t pool and the r2t queue. The insertion and deletion from these queues didn't corespond to the assumption taken by the new forward/backwards session locking paradigm. That is, in iscsi_tcp_clenup_task which belongs to the RX (backwards) path, r2t is taken out from r2t queue and inserted to the r2t pool. In iscsi_tcp_get_curr_r2t which belong to the TX (forward) path, r2t is also inserted to the r2t pool and another r2t is pulled from r2t queue. Only in iscsi_tcp_r2t_rsp which is called in the RX path but can requeue to the TX path, r2t is taken from the r2t pool and inserted to the r2t queue. In order to cope with this situation, two spin locks were added, pool2queue and queue2pool. The former protects extracting from the r2t pool and inserting to the r2t queue, and the later protects the extracing from the r2t queue and inserting to the r2t pool. Signed-off-by: Shlomo Pongratz <shlomop@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> [minor fix up to apply cleanly and compile fix] Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2014-02-07 14:41:38 +08:00
spin_unlock_bh(&session->frwd_lock);
iscsi_conn_failure(conn, ISCSI_ERR_SCSI_EH_SESSION_RST);
goto done;
default:
session->tmf_state = TMF_INITIAL;
goto unlock;
}
rc = SUCCESS;
[SCSI] libiscsi: Reduce locking contention in fast path Replace the session lock with two locks, a forward lock and a backwards lock named frwd_lock and back_lock respectively. The forward lock protects resources that change while sending a request to the target, such as cmdsn, queued_cmdsn, and allocating task from the commands' pool with kfifo_out. The backward lock protects resources that change while processing a response or in error path, such as cmdsn_exp, cmdsn_max, and returning tasks to the commands' pool with kfifo_in. Under a steady state fast-path situation, that is when one or more processes/threads submit IO to an iscsi device and a single kernel upcall (e.g softirq) is dealing with processing of responses without errors, this patch eliminates the contention between the queuecommand()/request response/scsi_done() flows associated with iscsi sessions. Between the forward and the backward locks exists a strict locking hierarchy. The mutual exclusion zone protected by the forward lock can enclose the mutual exclusion zone protected by the backward lock but not vice versa. For example, in iscsi_conn_teardown or in iscsi_xmit_data when there is a failure and __iscsi_put_task is called, the backward lock is taken while the forward lock is still taken. On the other hand, if in the RX path a nop is to be sent, for example in iscsi_handle_reject or __iscsi_complete_pdu than the forward lock is released and the backward lock is taken for the duration of iscsi_send_nopout, later the backward lock is released and the forward lock is retaken. libiscsi_tcp uses two kernel fifos the r2t pool and the r2t queue. The insertion and deletion from these queues didn't corespond to the assumption taken by the new forward/backwards session locking paradigm. That is, in iscsi_tcp_clenup_task which belongs to the RX (backwards) path, r2t is taken out from r2t queue and inserted to the r2t pool. In iscsi_tcp_get_curr_r2t which belong to the TX (forward) path, r2t is also inserted to the r2t pool and another r2t is pulled from r2t queue. Only in iscsi_tcp_r2t_rsp which is called in the RX path but can requeue to the TX path, r2t is taken from the r2t pool and inserted to the r2t queue. In order to cope with this situation, two spin locks were added, pool2queue and queue2pool. The former protects extracting from the r2t pool and inserting to the r2t queue, and the later protects the extracing from the r2t queue and inserting to the r2t pool. Signed-off-by: Shlomo Pongratz <shlomop@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> [minor fix up to apply cleanly and compile fix] Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2014-02-07 14:41:38 +08:00
spin_unlock_bh(&session->frwd_lock);
iscsi_suspend_tx(conn);
[SCSI] libiscsi: Reduce locking contention in fast path Replace the session lock with two locks, a forward lock and a backwards lock named frwd_lock and back_lock respectively. The forward lock protects resources that change while sending a request to the target, such as cmdsn, queued_cmdsn, and allocating task from the commands' pool with kfifo_out. The backward lock protects resources that change while processing a response or in error path, such as cmdsn_exp, cmdsn_max, and returning tasks to the commands' pool with kfifo_in. Under a steady state fast-path situation, that is when one or more processes/threads submit IO to an iscsi device and a single kernel upcall (e.g softirq) is dealing with processing of responses without errors, this patch eliminates the contention between the queuecommand()/request response/scsi_done() flows associated with iscsi sessions. Between the forward and the backward locks exists a strict locking hierarchy. The mutual exclusion zone protected by the forward lock can enclose the mutual exclusion zone protected by the backward lock but not vice versa. For example, in iscsi_conn_teardown or in iscsi_xmit_data when there is a failure and __iscsi_put_task is called, the backward lock is taken while the forward lock is still taken. On the other hand, if in the RX path a nop is to be sent, for example in iscsi_handle_reject or __iscsi_complete_pdu than the forward lock is released and the backward lock is taken for the duration of iscsi_send_nopout, later the backward lock is released and the forward lock is retaken. libiscsi_tcp uses two kernel fifos the r2t pool and the r2t queue. The insertion and deletion from these queues didn't corespond to the assumption taken by the new forward/backwards session locking paradigm. That is, in iscsi_tcp_clenup_task which belongs to the RX (backwards) path, r2t is taken out from r2t queue and inserted to the r2t pool. In iscsi_tcp_get_curr_r2t which belong to the TX (forward) path, r2t is also inserted to the r2t pool and another r2t is pulled from r2t queue. Only in iscsi_tcp_r2t_rsp which is called in the RX path but can requeue to the TX path, r2t is taken from the r2t pool and inserted to the r2t queue. In order to cope with this situation, two spin locks were added, pool2queue and queue2pool. The former protects extracting from the r2t pool and inserting to the r2t queue, and the later protects the extracing from the r2t queue and inserting to the r2t pool. Signed-off-by: Shlomo Pongratz <shlomop@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> [minor fix up to apply cleanly and compile fix] Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2014-02-07 14:41:38 +08:00
spin_lock_bh(&session->frwd_lock);
memset(hdr, 0, sizeof(*hdr));
fail_scsi_tasks(conn, sc->device->lun, DID_ERROR);
session->tmf_state = TMF_INITIAL;
[SCSI] libiscsi: Reduce locking contention in fast path Replace the session lock with two locks, a forward lock and a backwards lock named frwd_lock and back_lock respectively. The forward lock protects resources that change while sending a request to the target, such as cmdsn, queued_cmdsn, and allocating task from the commands' pool with kfifo_out. The backward lock protects resources that change while processing a response or in error path, such as cmdsn_exp, cmdsn_max, and returning tasks to the commands' pool with kfifo_in. Under a steady state fast-path situation, that is when one or more processes/threads submit IO to an iscsi device and a single kernel upcall (e.g softirq) is dealing with processing of responses without errors, this patch eliminates the contention between the queuecommand()/request response/scsi_done() flows associated with iscsi sessions. Between the forward and the backward locks exists a strict locking hierarchy. The mutual exclusion zone protected by the forward lock can enclose the mutual exclusion zone protected by the backward lock but not vice versa. For example, in iscsi_conn_teardown or in iscsi_xmit_data when there is a failure and __iscsi_put_task is called, the backward lock is taken while the forward lock is still taken. On the other hand, if in the RX path a nop is to be sent, for example in iscsi_handle_reject or __iscsi_complete_pdu than the forward lock is released and the backward lock is taken for the duration of iscsi_send_nopout, later the backward lock is released and the forward lock is retaken. libiscsi_tcp uses two kernel fifos the r2t pool and the r2t queue. The insertion and deletion from these queues didn't corespond to the assumption taken by the new forward/backwards session locking paradigm. That is, in iscsi_tcp_clenup_task which belongs to the RX (backwards) path, r2t is taken out from r2t queue and inserted to the r2t pool. In iscsi_tcp_get_curr_r2t which belong to the TX (forward) path, r2t is also inserted to the r2t pool and another r2t is pulled from r2t queue. Only in iscsi_tcp_r2t_rsp which is called in the RX path but can requeue to the TX path, r2t is taken from the r2t pool and inserted to the r2t queue. In order to cope with this situation, two spin locks were added, pool2queue and queue2pool. The former protects extracting from the r2t pool and inserting to the r2t queue, and the later protects the extracing from the r2t queue and inserting to the r2t pool. Signed-off-by: Shlomo Pongratz <shlomop@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> [minor fix up to apply cleanly and compile fix] Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2014-02-07 14:41:38 +08:00
spin_unlock_bh(&session->frwd_lock);
iscsi_start_tx(conn);
goto done;
unlock:
[SCSI] libiscsi: Reduce locking contention in fast path Replace the session lock with two locks, a forward lock and a backwards lock named frwd_lock and back_lock respectively. The forward lock protects resources that change while sending a request to the target, such as cmdsn, queued_cmdsn, and allocating task from the commands' pool with kfifo_out. The backward lock protects resources that change while processing a response or in error path, such as cmdsn_exp, cmdsn_max, and returning tasks to the commands' pool with kfifo_in. Under a steady state fast-path situation, that is when one or more processes/threads submit IO to an iscsi device and a single kernel upcall (e.g softirq) is dealing with processing of responses without errors, this patch eliminates the contention between the queuecommand()/request response/scsi_done() flows associated with iscsi sessions. Between the forward and the backward locks exists a strict locking hierarchy. The mutual exclusion zone protected by the forward lock can enclose the mutual exclusion zone protected by the backward lock but not vice versa. For example, in iscsi_conn_teardown or in iscsi_xmit_data when there is a failure and __iscsi_put_task is called, the backward lock is taken while the forward lock is still taken. On the other hand, if in the RX path a nop is to be sent, for example in iscsi_handle_reject or __iscsi_complete_pdu than the forward lock is released and the backward lock is taken for the duration of iscsi_send_nopout, later the backward lock is released and the forward lock is retaken. libiscsi_tcp uses two kernel fifos the r2t pool and the r2t queue. The insertion and deletion from these queues didn't corespond to the assumption taken by the new forward/backwards session locking paradigm. That is, in iscsi_tcp_clenup_task which belongs to the RX (backwards) path, r2t is taken out from r2t queue and inserted to the r2t pool. In iscsi_tcp_get_curr_r2t which belong to the TX (forward) path, r2t is also inserted to the r2t pool and another r2t is pulled from r2t queue. Only in iscsi_tcp_r2t_rsp which is called in the RX path but can requeue to the TX path, r2t is taken from the r2t pool and inserted to the r2t queue. In order to cope with this situation, two spin locks were added, pool2queue and queue2pool. The former protects extracting from the r2t pool and inserting to the r2t queue, and the later protects the extracing from the r2t queue and inserting to the r2t pool. Signed-off-by: Shlomo Pongratz <shlomop@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> [minor fix up to apply cleanly and compile fix] Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2014-02-07 14:41:38 +08:00
spin_unlock_bh(&session->frwd_lock);
done:
ISCSI_DBG_EH(session, "dev reset result = %s\n",
rc == SUCCESS ? "SUCCESS" : "FAILED");
mutex_unlock(&session->eh_mutex);
return rc;
}
EXPORT_SYMBOL_GPL(iscsi_eh_device_reset);
void iscsi_session_recovery_timedout(struct iscsi_cls_session *cls_session)
{
struct iscsi_session *session = cls_session->dd_data;
[SCSI] libiscsi: Reduce locking contention in fast path Replace the session lock with two locks, a forward lock and a backwards lock named frwd_lock and back_lock respectively. The forward lock protects resources that change while sending a request to the target, such as cmdsn, queued_cmdsn, and allocating task from the commands' pool with kfifo_out. The backward lock protects resources that change while processing a response or in error path, such as cmdsn_exp, cmdsn_max, and returning tasks to the commands' pool with kfifo_in. Under a steady state fast-path situation, that is when one or more processes/threads submit IO to an iscsi device and a single kernel upcall (e.g softirq) is dealing with processing of responses without errors, this patch eliminates the contention between the queuecommand()/request response/scsi_done() flows associated with iscsi sessions. Between the forward and the backward locks exists a strict locking hierarchy. The mutual exclusion zone protected by the forward lock can enclose the mutual exclusion zone protected by the backward lock but not vice versa. For example, in iscsi_conn_teardown or in iscsi_xmit_data when there is a failure and __iscsi_put_task is called, the backward lock is taken while the forward lock is still taken. On the other hand, if in the RX path a nop is to be sent, for example in iscsi_handle_reject or __iscsi_complete_pdu than the forward lock is released and the backward lock is taken for the duration of iscsi_send_nopout, later the backward lock is released and the forward lock is retaken. libiscsi_tcp uses two kernel fifos the r2t pool and the r2t queue. The insertion and deletion from these queues didn't corespond to the assumption taken by the new forward/backwards session locking paradigm. That is, in iscsi_tcp_clenup_task which belongs to the RX (backwards) path, r2t is taken out from r2t queue and inserted to the r2t pool. In iscsi_tcp_get_curr_r2t which belong to the TX (forward) path, r2t is also inserted to the r2t pool and another r2t is pulled from r2t queue. Only in iscsi_tcp_r2t_rsp which is called in the RX path but can requeue to the TX path, r2t is taken from the r2t pool and inserted to the r2t queue. In order to cope with this situation, two spin locks were added, pool2queue and queue2pool. The former protects extracting from the r2t pool and inserting to the r2t queue, and the later protects the extracing from the r2t queue and inserting to the r2t pool. Signed-off-by: Shlomo Pongratz <shlomop@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> [minor fix up to apply cleanly and compile fix] Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2014-02-07 14:41:38 +08:00
spin_lock_bh(&session->frwd_lock);
if (session->state != ISCSI_STATE_LOGGED_IN) {
session->state = ISCSI_STATE_RECOVERY_FAILED;
wake_up(&session->ehwait);
}
[SCSI] libiscsi: Reduce locking contention in fast path Replace the session lock with two locks, a forward lock and a backwards lock named frwd_lock and back_lock respectively. The forward lock protects resources that change while sending a request to the target, such as cmdsn, queued_cmdsn, and allocating task from the commands' pool with kfifo_out. The backward lock protects resources that change while processing a response or in error path, such as cmdsn_exp, cmdsn_max, and returning tasks to the commands' pool with kfifo_in. Under a steady state fast-path situation, that is when one or more processes/threads submit IO to an iscsi device and a single kernel upcall (e.g softirq) is dealing with processing of responses without errors, this patch eliminates the contention between the queuecommand()/request response/scsi_done() flows associated with iscsi sessions. Between the forward and the backward locks exists a strict locking hierarchy. The mutual exclusion zone protected by the forward lock can enclose the mutual exclusion zone protected by the backward lock but not vice versa. For example, in iscsi_conn_teardown or in iscsi_xmit_data when there is a failure and __iscsi_put_task is called, the backward lock is taken while the forward lock is still taken. On the other hand, if in the RX path a nop is to be sent, for example in iscsi_handle_reject or __iscsi_complete_pdu than the forward lock is released and the backward lock is taken for the duration of iscsi_send_nopout, later the backward lock is released and the forward lock is retaken. libiscsi_tcp uses two kernel fifos the r2t pool and the r2t queue. The insertion and deletion from these queues didn't corespond to the assumption taken by the new forward/backwards session locking paradigm. That is, in iscsi_tcp_clenup_task which belongs to the RX (backwards) path, r2t is taken out from r2t queue and inserted to the r2t pool. In iscsi_tcp_get_curr_r2t which belong to the TX (forward) path, r2t is also inserted to the r2t pool and another r2t is pulled from r2t queue. Only in iscsi_tcp_r2t_rsp which is called in the RX path but can requeue to the TX path, r2t is taken from the r2t pool and inserted to the r2t queue. In order to cope with this situation, two spin locks were added, pool2queue and queue2pool. The former protects extracting from the r2t pool and inserting to the r2t queue, and the later protects the extracing from the r2t queue and inserting to the r2t pool. Signed-off-by: Shlomo Pongratz <shlomop@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> [minor fix up to apply cleanly and compile fix] Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2014-02-07 14:41:38 +08:00
spin_unlock_bh(&session->frwd_lock);
}
EXPORT_SYMBOL_GPL(iscsi_session_recovery_timedout);
/**
* iscsi_eh_session_reset - drop session and attempt relogin
* @sc: scsi command
*
* This function will wait for a relogin, session termination from
* userspace, or a recovery/replacement timeout.
*/
int iscsi_eh_session_reset(struct scsi_cmnd *sc)
{
struct iscsi_cls_session *cls_session;
struct iscsi_session *session;
struct iscsi_conn *conn;
cls_session = starget_to_session(scsi_target(sc->device));
session = cls_session->dd_data;
mutex_lock(&session->eh_mutex);
[SCSI] libiscsi: Reduce locking contention in fast path Replace the session lock with two locks, a forward lock and a backwards lock named frwd_lock and back_lock respectively. The forward lock protects resources that change while sending a request to the target, such as cmdsn, queued_cmdsn, and allocating task from the commands' pool with kfifo_out. The backward lock protects resources that change while processing a response or in error path, such as cmdsn_exp, cmdsn_max, and returning tasks to the commands' pool with kfifo_in. Under a steady state fast-path situation, that is when one or more processes/threads submit IO to an iscsi device and a single kernel upcall (e.g softirq) is dealing with processing of responses without errors, this patch eliminates the contention between the queuecommand()/request response/scsi_done() flows associated with iscsi sessions. Between the forward and the backward locks exists a strict locking hierarchy. The mutual exclusion zone protected by the forward lock can enclose the mutual exclusion zone protected by the backward lock but not vice versa. For example, in iscsi_conn_teardown or in iscsi_xmit_data when there is a failure and __iscsi_put_task is called, the backward lock is taken while the forward lock is still taken. On the other hand, if in the RX path a nop is to be sent, for example in iscsi_handle_reject or __iscsi_complete_pdu than the forward lock is released and the backward lock is taken for the duration of iscsi_send_nopout, later the backward lock is released and the forward lock is retaken. libiscsi_tcp uses two kernel fifos the r2t pool and the r2t queue. The insertion and deletion from these queues didn't corespond to the assumption taken by the new forward/backwards session locking paradigm. That is, in iscsi_tcp_clenup_task which belongs to the RX (backwards) path, r2t is taken out from r2t queue and inserted to the r2t pool. In iscsi_tcp_get_curr_r2t which belong to the TX (forward) path, r2t is also inserted to the r2t pool and another r2t is pulled from r2t queue. Only in iscsi_tcp_r2t_rsp which is called in the RX path but can requeue to the TX path, r2t is taken from the r2t pool and inserted to the r2t queue. In order to cope with this situation, two spin locks were added, pool2queue and queue2pool. The former protects extracting from the r2t pool and inserting to the r2t queue, and the later protects the extracing from the r2t queue and inserting to the r2t pool. Signed-off-by: Shlomo Pongratz <shlomop@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> [minor fix up to apply cleanly and compile fix] Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2014-02-07 14:41:38 +08:00
spin_lock_bh(&session->frwd_lock);
if (session->state == ISCSI_STATE_TERMINATE) {
failed:
ISCSI_DBG_EH(session,
"failing session reset: Could not log back into "
"%s [age %d]\n", session->targetname,
session->age);
[SCSI] libiscsi: Reduce locking contention in fast path Replace the session lock with two locks, a forward lock and a backwards lock named frwd_lock and back_lock respectively. The forward lock protects resources that change while sending a request to the target, such as cmdsn, queued_cmdsn, and allocating task from the commands' pool with kfifo_out. The backward lock protects resources that change while processing a response or in error path, such as cmdsn_exp, cmdsn_max, and returning tasks to the commands' pool with kfifo_in. Under a steady state fast-path situation, that is when one or more processes/threads submit IO to an iscsi device and a single kernel upcall (e.g softirq) is dealing with processing of responses without errors, this patch eliminates the contention between the queuecommand()/request response/scsi_done() flows associated with iscsi sessions. Between the forward and the backward locks exists a strict locking hierarchy. The mutual exclusion zone protected by the forward lock can enclose the mutual exclusion zone protected by the backward lock but not vice versa. For example, in iscsi_conn_teardown or in iscsi_xmit_data when there is a failure and __iscsi_put_task is called, the backward lock is taken while the forward lock is still taken. On the other hand, if in the RX path a nop is to be sent, for example in iscsi_handle_reject or __iscsi_complete_pdu than the forward lock is released and the backward lock is taken for the duration of iscsi_send_nopout, later the backward lock is released and the forward lock is retaken. libiscsi_tcp uses two kernel fifos the r2t pool and the r2t queue. The insertion and deletion from these queues didn't corespond to the assumption taken by the new forward/backwards session locking paradigm. That is, in iscsi_tcp_clenup_task which belongs to the RX (backwards) path, r2t is taken out from r2t queue and inserted to the r2t pool. In iscsi_tcp_get_curr_r2t which belong to the TX (forward) path, r2t is also inserted to the r2t pool and another r2t is pulled from r2t queue. Only in iscsi_tcp_r2t_rsp which is called in the RX path but can requeue to the TX path, r2t is taken from the r2t pool and inserted to the r2t queue. In order to cope with this situation, two spin locks were added, pool2queue and queue2pool. The former protects extracting from the r2t pool and inserting to the r2t queue, and the later protects the extracing from the r2t queue and inserting to the r2t pool. Signed-off-by: Shlomo Pongratz <shlomop@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> [minor fix up to apply cleanly and compile fix] Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2014-02-07 14:41:38 +08:00
spin_unlock_bh(&session->frwd_lock);
mutex_unlock(&session->eh_mutex);
return FAILED;
}
conn = session->leadconn;
iscsi_get_conn(conn->cls_conn);
[SCSI] libiscsi: Reduce locking contention in fast path Replace the session lock with two locks, a forward lock and a backwards lock named frwd_lock and back_lock respectively. The forward lock protects resources that change while sending a request to the target, such as cmdsn, queued_cmdsn, and allocating task from the commands' pool with kfifo_out. The backward lock protects resources that change while processing a response or in error path, such as cmdsn_exp, cmdsn_max, and returning tasks to the commands' pool with kfifo_in. Under a steady state fast-path situation, that is when one or more processes/threads submit IO to an iscsi device and a single kernel upcall (e.g softirq) is dealing with processing of responses without errors, this patch eliminates the contention between the queuecommand()/request response/scsi_done() flows associated with iscsi sessions. Between the forward and the backward locks exists a strict locking hierarchy. The mutual exclusion zone protected by the forward lock can enclose the mutual exclusion zone protected by the backward lock but not vice versa. For example, in iscsi_conn_teardown or in iscsi_xmit_data when there is a failure and __iscsi_put_task is called, the backward lock is taken while the forward lock is still taken. On the other hand, if in the RX path a nop is to be sent, for example in iscsi_handle_reject or __iscsi_complete_pdu than the forward lock is released and the backward lock is taken for the duration of iscsi_send_nopout, later the backward lock is released and the forward lock is retaken. libiscsi_tcp uses two kernel fifos the r2t pool and the r2t queue. The insertion and deletion from these queues didn't corespond to the assumption taken by the new forward/backwards session locking paradigm. That is, in iscsi_tcp_clenup_task which belongs to the RX (backwards) path, r2t is taken out from r2t queue and inserted to the r2t pool. In iscsi_tcp_get_curr_r2t which belong to the TX (forward) path, r2t is also inserted to the r2t pool and another r2t is pulled from r2t queue. Only in iscsi_tcp_r2t_rsp which is called in the RX path but can requeue to the TX path, r2t is taken from the r2t pool and inserted to the r2t queue. In order to cope with this situation, two spin locks were added, pool2queue and queue2pool. The former protects extracting from the r2t pool and inserting to the r2t queue, and the later protects the extracing from the r2t queue and inserting to the r2t pool. Signed-off-by: Shlomo Pongratz <shlomop@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> [minor fix up to apply cleanly and compile fix] Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2014-02-07 14:41:38 +08:00
spin_unlock_bh(&session->frwd_lock);
mutex_unlock(&session->eh_mutex);
iscsi_conn_failure(conn, ISCSI_ERR_SCSI_EH_SESSION_RST);
iscsi_put_conn(conn->cls_conn);
ISCSI_DBG_EH(session, "wait for relogin\n");
wait_event_interruptible(session->ehwait,
session->state == ISCSI_STATE_TERMINATE ||
session->state == ISCSI_STATE_LOGGED_IN ||
session->state == ISCSI_STATE_RECOVERY_FAILED);
if (signal_pending(current))
flush_signals(current);
mutex_lock(&session->eh_mutex);
[SCSI] libiscsi: Reduce locking contention in fast path Replace the session lock with two locks, a forward lock and a backwards lock named frwd_lock and back_lock respectively. The forward lock protects resources that change while sending a request to the target, such as cmdsn, queued_cmdsn, and allocating task from the commands' pool with kfifo_out. The backward lock protects resources that change while processing a response or in error path, such as cmdsn_exp, cmdsn_max, and returning tasks to the commands' pool with kfifo_in. Under a steady state fast-path situation, that is when one or more processes/threads submit IO to an iscsi device and a single kernel upcall (e.g softirq) is dealing with processing of responses without errors, this patch eliminates the contention between the queuecommand()/request response/scsi_done() flows associated with iscsi sessions. Between the forward and the backward locks exists a strict locking hierarchy. The mutual exclusion zone protected by the forward lock can enclose the mutual exclusion zone protected by the backward lock but not vice versa. For example, in iscsi_conn_teardown or in iscsi_xmit_data when there is a failure and __iscsi_put_task is called, the backward lock is taken while the forward lock is still taken. On the other hand, if in the RX path a nop is to be sent, for example in iscsi_handle_reject or __iscsi_complete_pdu than the forward lock is released and the backward lock is taken for the duration of iscsi_send_nopout, later the backward lock is released and the forward lock is retaken. libiscsi_tcp uses two kernel fifos the r2t pool and the r2t queue. The insertion and deletion from these queues didn't corespond to the assumption taken by the new forward/backwards session locking paradigm. That is, in iscsi_tcp_clenup_task which belongs to the RX (backwards) path, r2t is taken out from r2t queue and inserted to the r2t pool. In iscsi_tcp_get_curr_r2t which belong to the TX (forward) path, r2t is also inserted to the r2t pool and another r2t is pulled from r2t queue. Only in iscsi_tcp_r2t_rsp which is called in the RX path but can requeue to the TX path, r2t is taken from the r2t pool and inserted to the r2t queue. In order to cope with this situation, two spin locks were added, pool2queue and queue2pool. The former protects extracting from the r2t pool and inserting to the r2t queue, and the later protects the extracing from the r2t queue and inserting to the r2t pool. Signed-off-by: Shlomo Pongratz <shlomop@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> [minor fix up to apply cleanly and compile fix] Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2014-02-07 14:41:38 +08:00
spin_lock_bh(&session->frwd_lock);
if (session->state == ISCSI_STATE_LOGGED_IN) {
ISCSI_DBG_EH(session,
"session reset succeeded for %s,%s\n",
session->targetname, conn->persistent_address);
} else
goto failed;
[SCSI] libiscsi: Reduce locking contention in fast path Replace the session lock with two locks, a forward lock and a backwards lock named frwd_lock and back_lock respectively. The forward lock protects resources that change while sending a request to the target, such as cmdsn, queued_cmdsn, and allocating task from the commands' pool with kfifo_out. The backward lock protects resources that change while processing a response or in error path, such as cmdsn_exp, cmdsn_max, and returning tasks to the commands' pool with kfifo_in. Under a steady state fast-path situation, that is when one or more processes/threads submit IO to an iscsi device and a single kernel upcall (e.g softirq) is dealing with processing of responses without errors, this patch eliminates the contention between the queuecommand()/request response/scsi_done() flows associated with iscsi sessions. Between the forward and the backward locks exists a strict locking hierarchy. The mutual exclusion zone protected by the forward lock can enclose the mutual exclusion zone protected by the backward lock but not vice versa. For example, in iscsi_conn_teardown or in iscsi_xmit_data when there is a failure and __iscsi_put_task is called, the backward lock is taken while the forward lock is still taken. On the other hand, if in the RX path a nop is to be sent, for example in iscsi_handle_reject or __iscsi_complete_pdu than the forward lock is released and the backward lock is taken for the duration of iscsi_send_nopout, later the backward lock is released and the forward lock is retaken. libiscsi_tcp uses two kernel fifos the r2t pool and the r2t queue. The insertion and deletion from these queues didn't corespond to the assumption taken by the new forward/backwards session locking paradigm. That is, in iscsi_tcp_clenup_task which belongs to the RX (backwards) path, r2t is taken out from r2t queue and inserted to the r2t pool. In iscsi_tcp_get_curr_r2t which belong to the TX (forward) path, r2t is also inserted to the r2t pool and another r2t is pulled from r2t queue. Only in iscsi_tcp_r2t_rsp which is called in the RX path but can requeue to the TX path, r2t is taken from the r2t pool and inserted to the r2t queue. In order to cope with this situation, two spin locks were added, pool2queue and queue2pool. The former protects extracting from the r2t pool and inserting to the r2t queue, and the later protects the extracing from the r2t queue and inserting to the r2t pool. Signed-off-by: Shlomo Pongratz <shlomop@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> [minor fix up to apply cleanly and compile fix] Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2014-02-07 14:41:38 +08:00
spin_unlock_bh(&session->frwd_lock);
mutex_unlock(&session->eh_mutex);
return SUCCESS;
}
EXPORT_SYMBOL_GPL(iscsi_eh_session_reset);
static void iscsi_prep_tgt_reset_pdu(struct scsi_cmnd *sc, struct iscsi_tm *hdr)
{
memset(hdr, 0, sizeof(*hdr));
hdr->opcode = ISCSI_OP_SCSI_TMFUNC | ISCSI_OP_IMMEDIATE;
hdr->flags = ISCSI_TM_FUNC_TARGET_WARM_RESET & ISCSI_FLAG_TM_FUNC_MASK;
hdr->flags |= ISCSI_FLAG_CMD_FINAL;
hdr->rtt = RESERVED_ITT;
}
/**
* iscsi_eh_target_reset - reset target
* @sc: scsi command
*
* This will attempt to send a warm target reset.
*/
static int iscsi_eh_target_reset(struct scsi_cmnd *sc)
{
struct iscsi_cls_session *cls_session;
struct iscsi_session *session;
struct iscsi_conn *conn;
struct iscsi_tm *hdr;
int rc = FAILED;
cls_session = starget_to_session(scsi_target(sc->device));
session = cls_session->dd_data;
ISCSI_DBG_EH(session, "tgt Reset [sc %p tgt %s]\n", sc,
session->targetname);
mutex_lock(&session->eh_mutex);
[SCSI] libiscsi: Reduce locking contention in fast path Replace the session lock with two locks, a forward lock and a backwards lock named frwd_lock and back_lock respectively. The forward lock protects resources that change while sending a request to the target, such as cmdsn, queued_cmdsn, and allocating task from the commands' pool with kfifo_out. The backward lock protects resources that change while processing a response or in error path, such as cmdsn_exp, cmdsn_max, and returning tasks to the commands' pool with kfifo_in. Under a steady state fast-path situation, that is when one or more processes/threads submit IO to an iscsi device and a single kernel upcall (e.g softirq) is dealing with processing of responses without errors, this patch eliminates the contention between the queuecommand()/request response/scsi_done() flows associated with iscsi sessions. Between the forward and the backward locks exists a strict locking hierarchy. The mutual exclusion zone protected by the forward lock can enclose the mutual exclusion zone protected by the backward lock but not vice versa. For example, in iscsi_conn_teardown or in iscsi_xmit_data when there is a failure and __iscsi_put_task is called, the backward lock is taken while the forward lock is still taken. On the other hand, if in the RX path a nop is to be sent, for example in iscsi_handle_reject or __iscsi_complete_pdu than the forward lock is released and the backward lock is taken for the duration of iscsi_send_nopout, later the backward lock is released and the forward lock is retaken. libiscsi_tcp uses two kernel fifos the r2t pool and the r2t queue. The insertion and deletion from these queues didn't corespond to the assumption taken by the new forward/backwards session locking paradigm. That is, in iscsi_tcp_clenup_task which belongs to the RX (backwards) path, r2t is taken out from r2t queue and inserted to the r2t pool. In iscsi_tcp_get_curr_r2t which belong to the TX (forward) path, r2t is also inserted to the r2t pool and another r2t is pulled from r2t queue. Only in iscsi_tcp_r2t_rsp which is called in the RX path but can requeue to the TX path, r2t is taken from the r2t pool and inserted to the r2t queue. In order to cope with this situation, two spin locks were added, pool2queue and queue2pool. The former protects extracting from the r2t pool and inserting to the r2t queue, and the later protects the extracing from the r2t queue and inserting to the r2t pool. Signed-off-by: Shlomo Pongratz <shlomop@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> [minor fix up to apply cleanly and compile fix] Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2014-02-07 14:41:38 +08:00
spin_lock_bh(&session->frwd_lock);
/*
* Just check if we are not logged in. We cannot check for
* the phase because the reset could come from a ioctl.
*/
if (!session->leadconn || session->state != ISCSI_STATE_LOGGED_IN)
goto unlock;
conn = session->leadconn;
/* only have one tmf outstanding at a time */
if (session->tmf_state != TMF_INITIAL)
goto unlock;
session->tmf_state = TMF_QUEUED;
hdr = &session->tmhdr;
iscsi_prep_tgt_reset_pdu(sc, hdr);
if (iscsi_exec_task_mgmt_fn(conn, hdr, session->age,
session->tgt_reset_timeout)) {
rc = FAILED;
goto unlock;
}
switch (session->tmf_state) {
case TMF_SUCCESS:
break;
case TMF_TIMEDOUT:
[SCSI] libiscsi: Reduce locking contention in fast path Replace the session lock with two locks, a forward lock and a backwards lock named frwd_lock and back_lock respectively. The forward lock protects resources that change while sending a request to the target, such as cmdsn, queued_cmdsn, and allocating task from the commands' pool with kfifo_out. The backward lock protects resources that change while processing a response or in error path, such as cmdsn_exp, cmdsn_max, and returning tasks to the commands' pool with kfifo_in. Under a steady state fast-path situation, that is when one or more processes/threads submit IO to an iscsi device and a single kernel upcall (e.g softirq) is dealing with processing of responses without errors, this patch eliminates the contention between the queuecommand()/request response/scsi_done() flows associated with iscsi sessions. Between the forward and the backward locks exists a strict locking hierarchy. The mutual exclusion zone protected by the forward lock can enclose the mutual exclusion zone protected by the backward lock but not vice versa. For example, in iscsi_conn_teardown or in iscsi_xmit_data when there is a failure and __iscsi_put_task is called, the backward lock is taken while the forward lock is still taken. On the other hand, if in the RX path a nop is to be sent, for example in iscsi_handle_reject or __iscsi_complete_pdu than the forward lock is released and the backward lock is taken for the duration of iscsi_send_nopout, later the backward lock is released and the forward lock is retaken. libiscsi_tcp uses two kernel fifos the r2t pool and the r2t queue. The insertion and deletion from these queues didn't corespond to the assumption taken by the new forward/backwards session locking paradigm. That is, in iscsi_tcp_clenup_task which belongs to the RX (backwards) path, r2t is taken out from r2t queue and inserted to the r2t pool. In iscsi_tcp_get_curr_r2t which belong to the TX (forward) path, r2t is also inserted to the r2t pool and another r2t is pulled from r2t queue. Only in iscsi_tcp_r2t_rsp which is called in the RX path but can requeue to the TX path, r2t is taken from the r2t pool and inserted to the r2t queue. In order to cope with this situation, two spin locks were added, pool2queue and queue2pool. The former protects extracting from the r2t pool and inserting to the r2t queue, and the later protects the extracing from the r2t queue and inserting to the r2t pool. Signed-off-by: Shlomo Pongratz <shlomop@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> [minor fix up to apply cleanly and compile fix] Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2014-02-07 14:41:38 +08:00
spin_unlock_bh(&session->frwd_lock);
iscsi_conn_failure(conn, ISCSI_ERR_SCSI_EH_SESSION_RST);
goto done;
default:
session->tmf_state = TMF_INITIAL;
goto unlock;
}
rc = SUCCESS;
[SCSI] libiscsi: Reduce locking contention in fast path Replace the session lock with two locks, a forward lock and a backwards lock named frwd_lock and back_lock respectively. The forward lock protects resources that change while sending a request to the target, such as cmdsn, queued_cmdsn, and allocating task from the commands' pool with kfifo_out. The backward lock protects resources that change while processing a response or in error path, such as cmdsn_exp, cmdsn_max, and returning tasks to the commands' pool with kfifo_in. Under a steady state fast-path situation, that is when one or more processes/threads submit IO to an iscsi device and a single kernel upcall (e.g softirq) is dealing with processing of responses without errors, this patch eliminates the contention between the queuecommand()/request response/scsi_done() flows associated with iscsi sessions. Between the forward and the backward locks exists a strict locking hierarchy. The mutual exclusion zone protected by the forward lock can enclose the mutual exclusion zone protected by the backward lock but not vice versa. For example, in iscsi_conn_teardown or in iscsi_xmit_data when there is a failure and __iscsi_put_task is called, the backward lock is taken while the forward lock is still taken. On the other hand, if in the RX path a nop is to be sent, for example in iscsi_handle_reject or __iscsi_complete_pdu than the forward lock is released and the backward lock is taken for the duration of iscsi_send_nopout, later the backward lock is released and the forward lock is retaken. libiscsi_tcp uses two kernel fifos the r2t pool and the r2t queue. The insertion and deletion from these queues didn't corespond to the assumption taken by the new forward/backwards session locking paradigm. That is, in iscsi_tcp_clenup_task which belongs to the RX (backwards) path, r2t is taken out from r2t queue and inserted to the r2t pool. In iscsi_tcp_get_curr_r2t which belong to the TX (forward) path, r2t is also inserted to the r2t pool and another r2t is pulled from r2t queue. Only in iscsi_tcp_r2t_rsp which is called in the RX path but can requeue to the TX path, r2t is taken from the r2t pool and inserted to the r2t queue. In order to cope with this situation, two spin locks were added, pool2queue and queue2pool. The former protects extracting from the r2t pool and inserting to the r2t queue, and the later protects the extracing from the r2t queue and inserting to the r2t pool. Signed-off-by: Shlomo Pongratz <shlomop@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> [minor fix up to apply cleanly and compile fix] Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2014-02-07 14:41:38 +08:00
spin_unlock_bh(&session->frwd_lock);
iscsi_suspend_tx(conn);
[SCSI] libiscsi: Reduce locking contention in fast path Replace the session lock with two locks, a forward lock and a backwards lock named frwd_lock and back_lock respectively. The forward lock protects resources that change while sending a request to the target, such as cmdsn, queued_cmdsn, and allocating task from the commands' pool with kfifo_out. The backward lock protects resources that change while processing a response or in error path, such as cmdsn_exp, cmdsn_max, and returning tasks to the commands' pool with kfifo_in. Under a steady state fast-path situation, that is when one or more processes/threads submit IO to an iscsi device and a single kernel upcall (e.g softirq) is dealing with processing of responses without errors, this patch eliminates the contention between the queuecommand()/request response/scsi_done() flows associated with iscsi sessions. Between the forward and the backward locks exists a strict locking hierarchy. The mutual exclusion zone protected by the forward lock can enclose the mutual exclusion zone protected by the backward lock but not vice versa. For example, in iscsi_conn_teardown or in iscsi_xmit_data when there is a failure and __iscsi_put_task is called, the backward lock is taken while the forward lock is still taken. On the other hand, if in the RX path a nop is to be sent, for example in iscsi_handle_reject or __iscsi_complete_pdu than the forward lock is released and the backward lock is taken for the duration of iscsi_send_nopout, later the backward lock is released and the forward lock is retaken. libiscsi_tcp uses two kernel fifos the r2t pool and the r2t queue. The insertion and deletion from these queues didn't corespond to the assumption taken by the new forward/backwards session locking paradigm. That is, in iscsi_tcp_clenup_task which belongs to the RX (backwards) path, r2t is taken out from r2t queue and inserted to the r2t pool. In iscsi_tcp_get_curr_r2t which belong to the TX (forward) path, r2t is also inserted to the r2t pool and another r2t is pulled from r2t queue. Only in iscsi_tcp_r2t_rsp which is called in the RX path but can requeue to the TX path, r2t is taken from the r2t pool and inserted to the r2t queue. In order to cope with this situation, two spin locks were added, pool2queue and queue2pool. The former protects extracting from the r2t pool and inserting to the r2t queue, and the later protects the extracing from the r2t queue and inserting to the r2t pool. Signed-off-by: Shlomo Pongratz <shlomop@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> [minor fix up to apply cleanly and compile fix] Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2014-02-07 14:41:38 +08:00
spin_lock_bh(&session->frwd_lock);
memset(hdr, 0, sizeof(*hdr));
fail_scsi_tasks(conn, -1, DID_ERROR);
session->tmf_state = TMF_INITIAL;
[SCSI] libiscsi: Reduce locking contention in fast path Replace the session lock with two locks, a forward lock and a backwards lock named frwd_lock and back_lock respectively. The forward lock protects resources that change while sending a request to the target, such as cmdsn, queued_cmdsn, and allocating task from the commands' pool with kfifo_out. The backward lock protects resources that change while processing a response or in error path, such as cmdsn_exp, cmdsn_max, and returning tasks to the commands' pool with kfifo_in. Under a steady state fast-path situation, that is when one or more processes/threads submit IO to an iscsi device and a single kernel upcall (e.g softirq) is dealing with processing of responses without errors, this patch eliminates the contention between the queuecommand()/request response/scsi_done() flows associated with iscsi sessions. Between the forward and the backward locks exists a strict locking hierarchy. The mutual exclusion zone protected by the forward lock can enclose the mutual exclusion zone protected by the backward lock but not vice versa. For example, in iscsi_conn_teardown or in iscsi_xmit_data when there is a failure and __iscsi_put_task is called, the backward lock is taken while the forward lock is still taken. On the other hand, if in the RX path a nop is to be sent, for example in iscsi_handle_reject or __iscsi_complete_pdu than the forward lock is released and the backward lock is taken for the duration of iscsi_send_nopout, later the backward lock is released and the forward lock is retaken. libiscsi_tcp uses two kernel fifos the r2t pool and the r2t queue. The insertion and deletion from these queues didn't corespond to the assumption taken by the new forward/backwards session locking paradigm. That is, in iscsi_tcp_clenup_task which belongs to the RX (backwards) path, r2t is taken out from r2t queue and inserted to the r2t pool. In iscsi_tcp_get_curr_r2t which belong to the TX (forward) path, r2t is also inserted to the r2t pool and another r2t is pulled from r2t queue. Only in iscsi_tcp_r2t_rsp which is called in the RX path but can requeue to the TX path, r2t is taken from the r2t pool and inserted to the r2t queue. In order to cope with this situation, two spin locks were added, pool2queue and queue2pool. The former protects extracting from the r2t pool and inserting to the r2t queue, and the later protects the extracing from the r2t queue and inserting to the r2t pool. Signed-off-by: Shlomo Pongratz <shlomop@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> [minor fix up to apply cleanly and compile fix] Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2014-02-07 14:41:38 +08:00
spin_unlock_bh(&session->frwd_lock);
iscsi_start_tx(conn);
goto done;
unlock:
[SCSI] libiscsi: Reduce locking contention in fast path Replace the session lock with two locks, a forward lock and a backwards lock named frwd_lock and back_lock respectively. The forward lock protects resources that change while sending a request to the target, such as cmdsn, queued_cmdsn, and allocating task from the commands' pool with kfifo_out. The backward lock protects resources that change while processing a response or in error path, such as cmdsn_exp, cmdsn_max, and returning tasks to the commands' pool with kfifo_in. Under a steady state fast-path situation, that is when one or more processes/threads submit IO to an iscsi device and a single kernel upcall (e.g softirq) is dealing with processing of responses without errors, this patch eliminates the contention between the queuecommand()/request response/scsi_done() flows associated with iscsi sessions. Between the forward and the backward locks exists a strict locking hierarchy. The mutual exclusion zone protected by the forward lock can enclose the mutual exclusion zone protected by the backward lock but not vice versa. For example, in iscsi_conn_teardown or in iscsi_xmit_data when there is a failure and __iscsi_put_task is called, the backward lock is taken while the forward lock is still taken. On the other hand, if in the RX path a nop is to be sent, for example in iscsi_handle_reject or __iscsi_complete_pdu than the forward lock is released and the backward lock is taken for the duration of iscsi_send_nopout, later the backward lock is released and the forward lock is retaken. libiscsi_tcp uses two kernel fifos the r2t pool and the r2t queue. The insertion and deletion from these queues didn't corespond to the assumption taken by the new forward/backwards session locking paradigm. That is, in iscsi_tcp_clenup_task which belongs to the RX (backwards) path, r2t is taken out from r2t queue and inserted to the r2t pool. In iscsi_tcp_get_curr_r2t which belong to the TX (forward) path, r2t is also inserted to the r2t pool and another r2t is pulled from r2t queue. Only in iscsi_tcp_r2t_rsp which is called in the RX path but can requeue to the TX path, r2t is taken from the r2t pool and inserted to the r2t queue. In order to cope with this situation, two spin locks were added, pool2queue and queue2pool. The former protects extracting from the r2t pool and inserting to the r2t queue, and the later protects the extracing from the r2t queue and inserting to the r2t pool. Signed-off-by: Shlomo Pongratz <shlomop@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> [minor fix up to apply cleanly and compile fix] Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2014-02-07 14:41:38 +08:00
spin_unlock_bh(&session->frwd_lock);
done:
ISCSI_DBG_EH(session, "tgt %s reset result = %s\n", session->targetname,
rc == SUCCESS ? "SUCCESS" : "FAILED");
mutex_unlock(&session->eh_mutex);
return rc;
}
/**
* iscsi_eh_recover_target - reset target and possibly the session
* @sc: scsi command
*
* This will attempt to send a warm target reset. If that fails,
* we will escalate to ERL0 session recovery.
*/
int iscsi_eh_recover_target(struct scsi_cmnd *sc)
{
int rc;
rc = iscsi_eh_target_reset(sc);
if (rc == FAILED)
rc = iscsi_eh_session_reset(sc);
return rc;
}
EXPORT_SYMBOL_GPL(iscsi_eh_recover_target);
/*
* Pre-allocate a pool of @max items of @item_size. By default, the pool
* should be accessed via kfifo_{get,put} on q->queue.
* Optionally, the caller can obtain the array of object pointers
* by passing in a non-NULL @items pointer
*/
int
iscsi_pool_init(struct iscsi_pool *q, int max, void ***items, int item_size)
{
int i, num_arrays = 1;
memset(q, 0, sizeof(*q));
q->max = max;
/* If the user passed an items pointer, he wants a copy of
* the array. */
if (items)
num_arrays++;
treewide: kvzalloc() -> kvcalloc() The kvzalloc() function has a 2-factor argument form, kvcalloc(). This patch replaces cases of: kvzalloc(a * b, gfp) with: kvcalloc(a * b, gfp) as well as handling cases of: kvzalloc(a * b * c, gfp) with: kvzalloc(array3_size(a, b, c), gfp) as it's slightly less ugly than: kvcalloc(array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: kvzalloc(4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ type TYPE; expression THING, E; @@ ( kvzalloc( - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | kvzalloc( - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression COUNT; typedef u8; typedef __u8; @@ ( kvzalloc( - sizeof(u8) * (COUNT) + COUNT , ...) | kvzalloc( - sizeof(__u8) * (COUNT) + COUNT , ...) | kvzalloc( - sizeof(char) * (COUNT) + COUNT , ...) | kvzalloc( - sizeof(unsigned char) * (COUNT) + COUNT , ...) | kvzalloc( - sizeof(u8) * COUNT + COUNT , ...) | kvzalloc( - sizeof(__u8) * COUNT + COUNT , ...) | kvzalloc( - sizeof(char) * COUNT + COUNT , ...) | kvzalloc( - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - kvzalloc + kvcalloc ( - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - kvzalloc + kvcalloc ( - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - kvzalloc + kvcalloc ( - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - kvzalloc + kvcalloc ( - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - kvzalloc + kvcalloc ( - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - kvzalloc + kvcalloc ( - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - kvzalloc + kvcalloc ( - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - kvzalloc + kvcalloc ( - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ identifier SIZE, COUNT; @@ - kvzalloc + kvcalloc ( - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( kvzalloc( - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kvzalloc( - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kvzalloc( - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kvzalloc( - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kvzalloc( - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kvzalloc( - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kvzalloc( - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kvzalloc( - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( kvzalloc( - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kvzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kvzalloc( - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kvzalloc( - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kvzalloc( - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | kvzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ identifier STRIDE, SIZE, COUNT; @@ ( kvzalloc( - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kvzalloc( - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kvzalloc( - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kvzalloc( - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kvzalloc( - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kvzalloc( - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kvzalloc( - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kvzalloc( - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression E1, E2, E3; constant C1, C2, C3; @@ ( kvzalloc(C1 * C2 * C3, ...) | kvzalloc( - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | kvzalloc( - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | kvzalloc( - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | kvzalloc( - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( kvzalloc(sizeof(THING) * C2, ...) | kvzalloc(sizeof(TYPE) * C2, ...) | kvzalloc(C1 * C2 * C3, ...) | kvzalloc(C1 * C2, ...) | - kvzalloc + kvcalloc ( - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - kvzalloc + kvcalloc ( - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - kvzalloc + kvcalloc ( - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - kvzalloc + kvcalloc ( - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - kvzalloc + kvcalloc ( - (E1) * E2 + E1, E2 , ...) | - kvzalloc + kvcalloc ( - (E1) * (E2) + E1, E2 , ...) | - kvzalloc + kvcalloc ( - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-06-13 05:04:48 +08:00
q->pool = kvcalloc(num_arrays * max, sizeof(void *), GFP_KERNEL);
if (q->pool == NULL)
return -ENOMEM;
kfifo_init(&q->queue, (void*)q->pool, max * sizeof(void*));
for (i = 0; i < max; i++) {
q->pool[i] = kzalloc(item_size, GFP_KERNEL);
if (q->pool[i] == NULL) {
q->max = i;
goto enomem;
}
kfifo_in(&q->queue, (void*)&q->pool[i], sizeof(void*));
}
if (items) {
*items = q->pool + max;
memcpy(*items, q->pool, max * sizeof(void *));
}
return 0;
enomem:
iscsi_pool_free(q);
return -ENOMEM;
}
EXPORT_SYMBOL_GPL(iscsi_pool_init);
void iscsi_pool_free(struct iscsi_pool *q)
{
int i;
for (i = 0; i < q->max; i++)
kfree(q->pool[i]);
scsi: libiscsi: use kvzalloc for iscsi_pool_init iscsiadm session login can fail with the following error: iscsiadm: Could not login to [iface: default, target: iqn.1986-03.com... iscsiadm: initiator reported error (9 - internal error) When /etc/iscsi/iscsid.conf sets node.session.cmds_max = 4096, it results in 64K-sized kmallocs per session. A system under fragmented slab pressure may not have any 64K objects available and fail iscsiadm session login. Even though memory objects of a smaller size are available, the large order allocation ends up failing. The kernel prints a warning and does dump_stack, like below: iscsid: page allocation failure: order:4, mode:0xc0d0 CPU: 0 PID: 2456 Comm: iscsid Not tainted 4.1.12-61.1.28.el6uek.x86_64 #2 Call Trace: [<ffffffff816c6e40>] dump_stack+0x63/0x83 [<ffffffff8118e58a>] warn_alloc_failed+0xea/0x140 [<ffffffff81191df9>] __alloc_pages_slowpath+0x409/0x760 [<ffffffff81192401>] __alloc_pages_nodemask+0x2b1/0x2d0 [<ffffffffa048f6c0>] ? dev_attr_host_ipaddress+0x20/0xffffffffffffc722 [<ffffffff811dc38f>] alloc_pages_current+0xaf/0x170 [<ffffffff81192581>] alloc_kmem_pages+0x31/0xd0 [<ffffffffa048f600>] ? iscsi_transport_group+0x20/0xffffffffffffc7e2 [<ffffffff811ad738>] kmalloc_order+0x18/0x50 [<ffffffff811ad7a4>] kmalloc_order_trace+0x34/0xe0 [<ffffffff8146ee30>] ? transport_remove_classdev+0x70/0x70 [<ffffffff811e843d>] __kmalloc+0x27d/0x2a0 [<ffffffff810c8cbd>] ? complete_all+0x4d/0x60 [<ffffffffa04af299>] iscsi_pool_init+0x69/0x160 [libiscsi] [<ffffffff81465d90>] ? device_initialize+0xb0/0xd0 [<ffffffffa04af510>] iscsi_session_setup+0x180/0x2f4 [libiscsi] [<ffffffffa04c5a60>] ? iscsi_max_lun+0x20/0xfffffffffffffa9e [iscsi_tcp] [<ffffffffa04c531f>] iscsi_sw_tcp_session_create+0xcf/0x150 [iscsi_tcp] [<ffffffffa04c5a60>] ? iscsi_max_lun+0x20/0xfffffffffffffa9e [iscsi_tcp] [<ffffffffa048a633>] iscsi_if_create_session+0x33/0xd0 [<ffffffffa04c5a60>] ? iscsi_max_lun+0x20/0xfffffffffffffa9e [iscsi_tcp] [<ffffffffa048abd8>] iscsi_if_recv_msg+0x508/0x8c0 [scsi_transport_iscsi] [<ffffffff811922eb>] ? __alloc_pages_nodemask+0x19b/0x2d0 [<ffffffff811e6d69>] ? __kmalloc_node_track_caller+0x209/0x2c0 [<ffffffffa048b00c>] iscsi_if_rx+0x7c/0x200 [scsi_transport_iscsi] [<ffffffff81623dc6>] netlink_unicast+0x126/0x1c0 [<ffffffff8162468c>] netlink_sendmsg+0x36c/0x400 [<ffffffff815d2fed>] sock_sendmsg+0x4d/0x60 [<ffffffff815d596a>] ___sys_sendmsg+0x30a/0x330 [<ffffffff811bc72c>] ? handle_pte_fault+0x20c/0x230 [<ffffffff811bc90c>] ? __handle_mm_fault+0x1bc/0x330 [<ffffffff811bcb32>] ? handle_mm_fault+0xb2/0x1a0 [<ffffffff815d5b99>] __sys_sendmsg+0x49/0x90 [<ffffffff815d5bf9>] SyS_sendmsg+0x19/0x20 [<ffffffff816cbb2e>] system_call_fastpath+0x12/0x71 Use kvzalloc for iscsi_pool in iscsi_pool_init. Signed-off-by: Kyle Fortin <kyle.fortin@oracle.com> Tested-by: Kyle Fortin <kyle.fortin@oracle.com> Reviewed-by: Joseph Slember <joe.slember@oracle.com> Reviewed-by: Lance Hartmann <lance.hartmann@oracle.com> Acked-by: Lee Duncan <lduncan@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-05-18 04:21:54 +08:00
kvfree(q->pool);
}
EXPORT_SYMBOL_GPL(iscsi_pool_free);
int iscsi_host_get_max_scsi_cmds(struct Scsi_Host *shost,
uint16_t requested_cmds_max)
{
int scsi_cmds, total_cmds = requested_cmds_max;
check:
if (!total_cmds)
total_cmds = ISCSI_DEF_XMIT_CMDS_MAX;
/*
* The iscsi layer needs some tasks for nop handling and tmfs,
* so the cmds_max must at least be greater than ISCSI_MGMT_CMDS_MAX
* + 1 command for scsi IO.
*/
if (total_cmds < ISCSI_TOTAL_CMDS_MIN) {
printk(KERN_ERR "iscsi: invalid max cmds of %d. Must be a power of two that is at least %d.\n",
total_cmds, ISCSI_TOTAL_CMDS_MIN);
return -EINVAL;
}
if (total_cmds > ISCSI_TOTAL_CMDS_MAX) {
printk(KERN_INFO "iscsi: invalid max cmds of %d. Must be a power of 2 less than or equal to %d. Using %d.\n",
requested_cmds_max, ISCSI_TOTAL_CMDS_MAX,
ISCSI_TOTAL_CMDS_MAX);
total_cmds = ISCSI_TOTAL_CMDS_MAX;
}
if (!is_power_of_2(total_cmds)) {
total_cmds = rounddown_pow_of_two(total_cmds);
if (total_cmds < ISCSI_TOTAL_CMDS_MIN) {
printk(KERN_ERR "iscsi: invalid max cmds of %d. Must be a power of 2 greater than %d.\n", requested_cmds_max, ISCSI_TOTAL_CMDS_MIN);
return -EINVAL;
}
printk(KERN_INFO "iscsi: invalid max cmds %d. Must be a power of 2. Rounding max cmds down to %d.\n",
requested_cmds_max, total_cmds);
}
scsi_cmds = total_cmds - ISCSI_MGMT_CMDS_MAX;
if (shost->can_queue && scsi_cmds > shost->can_queue) {
total_cmds = shost->can_queue;
printk(KERN_INFO "iscsi: requested max cmds %u is higher than driver limit. Using driver limit %u\n",
requested_cmds_max, shost->can_queue);
goto check;
}
return scsi_cmds;
}
EXPORT_SYMBOL_GPL(iscsi_host_get_max_scsi_cmds);
/**
* iscsi_host_add - add host to system
* @shost: scsi host
* @pdev: parent device
*
* This should be called by partial offload and software iscsi drivers
* to add a host to the system.
*/
int iscsi_host_add(struct Scsi_Host *shost, struct device *pdev)
{
if (!shost->can_queue)
shost->can_queue = ISCSI_DEF_XMIT_CMDS_MAX;
if (!shost->cmd_per_lun)
shost->cmd_per_lun = ISCSI_DEF_CMD_PER_LUN;
return scsi_add_host(shost, pdev);
}
EXPORT_SYMBOL_GPL(iscsi_host_add);
/**
* iscsi_host_alloc - allocate a host and driver data
* @sht: scsi host template
* @dd_data_size: driver host data size
* @xmit_can_sleep: bool indicating if LLD will queue IO from a work queue
*
* This should be called by partial offload and software iscsi drivers.
* To access the driver specific memory use the iscsi_host_priv() macro.
*/
struct Scsi_Host *iscsi_host_alloc(struct scsi_host_template *sht,
int dd_data_size, bool xmit_can_sleep)
{
struct Scsi_Host *shost;
struct iscsi_host *ihost;
shost = scsi_host_alloc(sht, sizeof(struct iscsi_host) + dd_data_size);
if (!shost)
return NULL;
ihost = shost_priv(shost);
if (xmit_can_sleep) {
ihost->workq = alloc_workqueue("iscsi_q_%d",
WQ_SYSFS | __WQ_LEGACY | WQ_MEM_RECLAIM | WQ_UNBOUND,
1, shost->host_no);
if (!ihost->workq)
goto free_host;
}
spin_lock_init(&ihost->lock);
ihost->state = ISCSI_HOST_SETUP;
ihost->num_sessions = 0;
init_waitqueue_head(&ihost->session_removal_wq);
return shost;
free_host:
scsi_host_put(shost);
return NULL;
}
EXPORT_SYMBOL_GPL(iscsi_host_alloc);
static void iscsi_notify_host_removed(struct iscsi_cls_session *cls_session)
{
iscsi_session_failure(cls_session->dd_data, ISCSI_ERR_INVALID_HOST);
}
/**
* iscsi_host_remove - remove host and sessions
* @shost: scsi host
* @is_shutdown: true if called from a driver shutdown callout
*
* If there are any sessions left, this will initiate the removal and wait
* for the completion.
*/
void iscsi_host_remove(struct Scsi_Host *shost, bool is_shutdown)
{
struct iscsi_host *ihost = shost_priv(shost);
unsigned long flags;
spin_lock_irqsave(&ihost->lock, flags);
ihost->state = ISCSI_HOST_REMOVED;
spin_unlock_irqrestore(&ihost->lock, flags);
if (!is_shutdown)
iscsi_host_for_each_session(shost, iscsi_notify_host_removed);
else
iscsi_host_for_each_session(shost, iscsi_force_destroy_session);
wait_event_interruptible(ihost->session_removal_wq,
ihost->num_sessions == 0);
if (signal_pending(current))
flush_signals(current);
scsi_remove_host(shost);
}
EXPORT_SYMBOL_GPL(iscsi_host_remove);
void iscsi_host_free(struct Scsi_Host *shost)
{
struct iscsi_host *ihost = shost_priv(shost);
if (ihost->workq)
destroy_workqueue(ihost->workq);
kfree(ihost->netdev);
kfree(ihost->hwaddress);
kfree(ihost->initiatorname);
scsi_host_put(shost);
}
EXPORT_SYMBOL_GPL(iscsi_host_free);
static void iscsi_host_dec_session_cnt(struct Scsi_Host *shost)
{
struct iscsi_host *ihost = shost_priv(shost);
unsigned long flags;
shost = scsi_host_get(shost);
if (!shost) {
printk(KERN_ERR "Invalid state. Cannot notify host removal "
"of session teardown event because host already "
"removed.\n");
return;
}
spin_lock_irqsave(&ihost->lock, flags);
ihost->num_sessions--;
if (ihost->num_sessions == 0)
wake_up(&ihost->session_removal_wq);
spin_unlock_irqrestore(&ihost->lock, flags);
scsi_host_put(shost);
}
/**
* iscsi_session_setup - create iscsi cls session and host and session
* @iscsit: iscsi transport template
* @shost: scsi host
* @cmds_max: session can queue
scsi: doc: fix iscsi-related kernel-doc warnings Fix kernel-doc warnings in drivers/scsi/ that are related to iscsi support interfaces. Fixes these kernel-doc warnings: (tested by adding these files to a new target.rst documentation file: WIP) ../drivers/scsi/libiscsi.c:2740: warning: No description found for parameter 'dd_size' ../drivers/scsi/libiscsi.c:2740: warning: No description found for parameter 'id' ../drivers/scsi/libiscsi.c:2961: warning: No description found for parameter 'cls_conn' ../drivers/scsi/iscsi_tcp.c:313: warning: No description found for parameter 'conn' ../drivers/scsi/iscsi_tcp.c:363: warning: No description found for parameter 'conn' ../drivers/scsi/libiscsi_tcp.c:810: warning: No description found for parameter 'tcp_conn' ../drivers/scsi/libiscsi_tcp.c:810: warning: No description found for parameter 'segment' ../drivers/scsi/libiscsi_tcp.c:887: warning: No description found for parameter 'offloaded' ../drivers/scsi/libiscsi_tcp.c:887: warning: No description found for parameter 'status' ../drivers/scsi/libiscsi_tcp.c:887: warning: Excess function parameter 'offload' description in 'iscsi_tcp_recv_skb' ../drivers/scsi/libiscsi_tcp.c:964: warning: Excess function parameter 'conn' description in 'iscsi_tcp_task_init' ../drivers/scsi/libiscsi_tcp.c:964: warning: Excess function parameter 'sc' description in 'iscsi_tcp_task_init' Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: "Nicholas A. Bellinger" <nab@linux-iscsi.org> Cc: linux-scsi@vger.kernel.org Cc: target-devel@vger.kernel.org Cc: Sagi Grimberg <sagi@grimberg.me> Cc: linux-rdma@vger.kernel.org Cc: "James E.J. Bottomley" <jejb@linux.vnet.ibm.com> Cc: "Martin K. Petersen" <martin.petersen@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-12-23 06:08:27 +08:00
* @dd_size: private driver data size, added to session allocation size
* @cmd_task_size: LLD task private data size
* @initial_cmdsn: initial CmdSN
scsi: doc: fix iscsi-related kernel-doc warnings Fix kernel-doc warnings in drivers/scsi/ that are related to iscsi support interfaces. Fixes these kernel-doc warnings: (tested by adding these files to a new target.rst documentation file: WIP) ../drivers/scsi/libiscsi.c:2740: warning: No description found for parameter 'dd_size' ../drivers/scsi/libiscsi.c:2740: warning: No description found for parameter 'id' ../drivers/scsi/libiscsi.c:2961: warning: No description found for parameter 'cls_conn' ../drivers/scsi/iscsi_tcp.c:313: warning: No description found for parameter 'conn' ../drivers/scsi/iscsi_tcp.c:363: warning: No description found for parameter 'conn' ../drivers/scsi/libiscsi_tcp.c:810: warning: No description found for parameter 'tcp_conn' ../drivers/scsi/libiscsi_tcp.c:810: warning: No description found for parameter 'segment' ../drivers/scsi/libiscsi_tcp.c:887: warning: No description found for parameter 'offloaded' ../drivers/scsi/libiscsi_tcp.c:887: warning: No description found for parameter 'status' ../drivers/scsi/libiscsi_tcp.c:887: warning: Excess function parameter 'offload' description in 'iscsi_tcp_recv_skb' ../drivers/scsi/libiscsi_tcp.c:964: warning: Excess function parameter 'conn' description in 'iscsi_tcp_task_init' ../drivers/scsi/libiscsi_tcp.c:964: warning: Excess function parameter 'sc' description in 'iscsi_tcp_task_init' Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: "Nicholas A. Bellinger" <nab@linux-iscsi.org> Cc: linux-scsi@vger.kernel.org Cc: target-devel@vger.kernel.org Cc: Sagi Grimberg <sagi@grimberg.me> Cc: linux-rdma@vger.kernel.org Cc: "James E.J. Bottomley" <jejb@linux.vnet.ibm.com> Cc: "Martin K. Petersen" <martin.petersen@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-12-23 06:08:27 +08:00
* @id: target ID to add to this session
*
* This can be used by software iscsi_transports that allocate
* a session per scsi host.
*
* Callers should set cmds_max to the largest total numer (mgmt + scsi) of
* tasks they support. The iscsi layer reserves ISCSI_MGMT_CMDS_MAX tasks
* for nop handling and login/logout requests.
*/
struct iscsi_cls_session *
iscsi_session_setup(struct iscsi_transport *iscsit, struct Scsi_Host *shost,
uint16_t cmds_max, int dd_size, int cmd_task_size,
uint32_t initial_cmdsn, unsigned int id)
{
struct iscsi_host *ihost = shost_priv(shost);
struct iscsi_session *session;
struct iscsi_cls_session *cls_session;
int cmd_i, scsi_cmds;
unsigned long flags;
spin_lock_irqsave(&ihost->lock, flags);
if (ihost->state == ISCSI_HOST_REMOVED) {
spin_unlock_irqrestore(&ihost->lock, flags);
return NULL;
}
ihost->num_sessions++;
spin_unlock_irqrestore(&ihost->lock, flags);
scsi_cmds = iscsi_host_get_max_scsi_cmds(shost, cmds_max);
if (scsi_cmds < 0)
goto dec_session_count;
cls_session = iscsi_alloc_session(shost, iscsit,
sizeof(struct iscsi_session) +
dd_size);
if (!cls_session)
goto dec_session_count;
session = cls_session->dd_data;
session->cls_session = cls_session;
session->host = shost;
session->state = ISCSI_STATE_FREE;
session->fast_abort = 1;
session->tgt_reset_timeout = 30;
session->lu_reset_timeout = 15;
session->abort_timeout = 10;
session->scsi_cmds_max = scsi_cmds;
session->cmds_max = scsi_cmds + ISCSI_MGMT_CMDS_MAX;
session->queued_cmdsn = session->cmdsn = initial_cmdsn;
session->exp_cmdsn = initial_cmdsn + 1;
session->max_cmdsn = initial_cmdsn + 1;
session->max_r2t = 1;
session->tt = iscsit;
session->dd_data = cls_session->dd_data + sizeof(*session);
[SCSI] libiscsi: Reduce locking contention in fast path Replace the session lock with two locks, a forward lock and a backwards lock named frwd_lock and back_lock respectively. The forward lock protects resources that change while sending a request to the target, such as cmdsn, queued_cmdsn, and allocating task from the commands' pool with kfifo_out. The backward lock protects resources that change while processing a response or in error path, such as cmdsn_exp, cmdsn_max, and returning tasks to the commands' pool with kfifo_in. Under a steady state fast-path situation, that is when one or more processes/threads submit IO to an iscsi device and a single kernel upcall (e.g softirq) is dealing with processing of responses without errors, this patch eliminates the contention between the queuecommand()/request response/scsi_done() flows associated with iscsi sessions. Between the forward and the backward locks exists a strict locking hierarchy. The mutual exclusion zone protected by the forward lock can enclose the mutual exclusion zone protected by the backward lock but not vice versa. For example, in iscsi_conn_teardown or in iscsi_xmit_data when there is a failure and __iscsi_put_task is called, the backward lock is taken while the forward lock is still taken. On the other hand, if in the RX path a nop is to be sent, for example in iscsi_handle_reject or __iscsi_complete_pdu than the forward lock is released and the backward lock is taken for the duration of iscsi_send_nopout, later the backward lock is released and the forward lock is retaken. libiscsi_tcp uses two kernel fifos the r2t pool and the r2t queue. The insertion and deletion from these queues didn't corespond to the assumption taken by the new forward/backwards session locking paradigm. That is, in iscsi_tcp_clenup_task which belongs to the RX (backwards) path, r2t is taken out from r2t queue and inserted to the r2t pool. In iscsi_tcp_get_curr_r2t which belong to the TX (forward) path, r2t is also inserted to the r2t pool and another r2t is pulled from r2t queue. Only in iscsi_tcp_r2t_rsp which is called in the RX path but can requeue to the TX path, r2t is taken from the r2t pool and inserted to the r2t queue. In order to cope with this situation, two spin locks were added, pool2queue and queue2pool. The former protects extracting from the r2t pool and inserting to the r2t queue, and the later protects the extracing from the r2t queue and inserting to the r2t pool. Signed-off-by: Shlomo Pongratz <shlomop@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> [minor fix up to apply cleanly and compile fix] Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2014-02-07 14:41:38 +08:00
session->tmf_state = TMF_INITIAL;
timer_setup(&session->tmf_timer, iscsi_tmf_timedout, 0);
mutex_init(&session->eh_mutex);
init_waitqueue_head(&session->ehwait);
[SCSI] libiscsi: Reduce locking contention in fast path Replace the session lock with two locks, a forward lock and a backwards lock named frwd_lock and back_lock respectively. The forward lock protects resources that change while sending a request to the target, such as cmdsn, queued_cmdsn, and allocating task from the commands' pool with kfifo_out. The backward lock protects resources that change while processing a response or in error path, such as cmdsn_exp, cmdsn_max, and returning tasks to the commands' pool with kfifo_in. Under a steady state fast-path situation, that is when one or more processes/threads submit IO to an iscsi device and a single kernel upcall (e.g softirq) is dealing with processing of responses without errors, this patch eliminates the contention between the queuecommand()/request response/scsi_done() flows associated with iscsi sessions. Between the forward and the backward locks exists a strict locking hierarchy. The mutual exclusion zone protected by the forward lock can enclose the mutual exclusion zone protected by the backward lock but not vice versa. For example, in iscsi_conn_teardown or in iscsi_xmit_data when there is a failure and __iscsi_put_task is called, the backward lock is taken while the forward lock is still taken. On the other hand, if in the RX path a nop is to be sent, for example in iscsi_handle_reject or __iscsi_complete_pdu than the forward lock is released and the backward lock is taken for the duration of iscsi_send_nopout, later the backward lock is released and the forward lock is retaken. libiscsi_tcp uses two kernel fifos the r2t pool and the r2t queue. The insertion and deletion from these queues didn't corespond to the assumption taken by the new forward/backwards session locking paradigm. That is, in iscsi_tcp_clenup_task which belongs to the RX (backwards) path, r2t is taken out from r2t queue and inserted to the r2t pool. In iscsi_tcp_get_curr_r2t which belong to the TX (forward) path, r2t is also inserted to the r2t pool and another r2t is pulled from r2t queue. Only in iscsi_tcp_r2t_rsp which is called in the RX path but can requeue to the TX path, r2t is taken from the r2t pool and inserted to the r2t queue. In order to cope with this situation, two spin locks were added, pool2queue and queue2pool. The former protects extracting from the r2t pool and inserting to the r2t queue, and the later protects the extracing from the r2t queue and inserting to the r2t pool. Signed-off-by: Shlomo Pongratz <shlomop@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> [minor fix up to apply cleanly and compile fix] Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2014-02-07 14:41:38 +08:00
spin_lock_init(&session->frwd_lock);
spin_lock_init(&session->back_lock);
/* initialize SCSI PDU commands pool */
if (iscsi_pool_init(&session->cmdpool, session->cmds_max,
(void***)&session->cmds,
cmd_task_size + sizeof(struct iscsi_task)))
goto cmdpool_alloc_fail;
/* pre-format cmds pool with ITT */
for (cmd_i = 0; cmd_i < session->cmds_max; cmd_i++) {
struct iscsi_task *task = session->cmds[cmd_i];
if (cmd_task_size)
task->dd_data = &task[1];
task->itt = cmd_i;
task->state = ISCSI_TASK_FREE;
INIT_LIST_HEAD(&task->running);
}
if (!try_module_get(iscsit->owner))
goto module_get_fail;
if (iscsi_add_session(cls_session, id))
goto cls_session_fail;
return cls_session;
cls_session_fail:
module_put(iscsit->owner);
module_get_fail:
iscsi_pool_free(&session->cmdpool);
cmdpool_alloc_fail:
iscsi_free_session(cls_session);
dec_session_count:
iscsi_host_dec_session_cnt(shost);
return NULL;
}
EXPORT_SYMBOL_GPL(iscsi_session_setup);
/**
* iscsi_session_teardown - destroy session, host, and cls_session
* @cls_session: iscsi session
*/
void iscsi_session_teardown(struct iscsi_cls_session *cls_session)
{
struct iscsi_session *session = cls_session->dd_data;
struct module *owner = cls_session->transport->owner;
struct Scsi_Host *shost = session->host;
iscsi_remove_session(cls_session);
iscsi_pool_free(&session->cmdpool);
kfree(session->password);
kfree(session->password_in);
kfree(session->username);
kfree(session->username_in);
kfree(session->targetname);
kfree(session->targetalias);
kfree(session->initiatorname);
kfree(session->boot_root);
kfree(session->boot_nic);
kfree(session->boot_target);
kfree(session->ifacename);
kfree(session->portal_type);
kfree(session->discovery_parent_type);
iscsi_free_session(cls_session);
iscsi_host_dec_session_cnt(shost);
module_put(owner);
}
EXPORT_SYMBOL_GPL(iscsi_session_teardown);
/**
* iscsi_conn_setup - create iscsi_cls_conn and iscsi_conn
* @cls_session: iscsi_cls_session
* @dd_size: private driver data size
* @conn_idx: cid
*/
struct iscsi_cls_conn *
iscsi_conn_setup(struct iscsi_cls_session *cls_session, int dd_size,
uint32_t conn_idx)
{
struct iscsi_session *session = cls_session->dd_data;
struct iscsi_conn *conn;
struct iscsi_cls_conn *cls_conn;
char *data;
int err;
cls_conn = iscsi_alloc_conn(cls_session, sizeof(*conn) + dd_size,
conn_idx);
if (!cls_conn)
return NULL;
conn = cls_conn->dd_data;
conn->dd_data = cls_conn->dd_data + sizeof(*conn);
conn->session = session;
conn->cls_conn = cls_conn;
conn->c_stage = ISCSI_CONN_INITIAL_STAGE;
conn->id = conn_idx;
conn->exp_statsn = 0;
timer_setup(&conn->transport_timer, iscsi_check_transport_timeouts, 0);
INIT_LIST_HEAD(&conn->mgmtqueue);
INIT_LIST_HEAD(&conn->cmdqueue);
INIT_LIST_HEAD(&conn->requeue);
INIT_WORK(&conn->xmitwork, iscsi_xmitworker);
/* allocate login_task used for the login/text sequences */
[SCSI] libiscsi: Reduce locking contention in fast path Replace the session lock with two locks, a forward lock and a backwards lock named frwd_lock and back_lock respectively. The forward lock protects resources that change while sending a request to the target, such as cmdsn, queued_cmdsn, and allocating task from the commands' pool with kfifo_out. The backward lock protects resources that change while processing a response or in error path, such as cmdsn_exp, cmdsn_max, and returning tasks to the commands' pool with kfifo_in. Under a steady state fast-path situation, that is when one or more processes/threads submit IO to an iscsi device and a single kernel upcall (e.g softirq) is dealing with processing of responses without errors, this patch eliminates the contention between the queuecommand()/request response/scsi_done() flows associated with iscsi sessions. Between the forward and the backward locks exists a strict locking hierarchy. The mutual exclusion zone protected by the forward lock can enclose the mutual exclusion zone protected by the backward lock but not vice versa. For example, in iscsi_conn_teardown or in iscsi_xmit_data when there is a failure and __iscsi_put_task is called, the backward lock is taken while the forward lock is still taken. On the other hand, if in the RX path a nop is to be sent, for example in iscsi_handle_reject or __iscsi_complete_pdu than the forward lock is released and the backward lock is taken for the duration of iscsi_send_nopout, later the backward lock is released and the forward lock is retaken. libiscsi_tcp uses two kernel fifos the r2t pool and the r2t queue. The insertion and deletion from these queues didn't corespond to the assumption taken by the new forward/backwards session locking paradigm. That is, in iscsi_tcp_clenup_task which belongs to the RX (backwards) path, r2t is taken out from r2t queue and inserted to the r2t pool. In iscsi_tcp_get_curr_r2t which belong to the TX (forward) path, r2t is also inserted to the r2t pool and another r2t is pulled from r2t queue. Only in iscsi_tcp_r2t_rsp which is called in the RX path but can requeue to the TX path, r2t is taken from the r2t pool and inserted to the r2t queue. In order to cope with this situation, two spin locks were added, pool2queue and queue2pool. The former protects extracting from the r2t pool and inserting to the r2t queue, and the later protects the extracing from the r2t queue and inserting to the r2t pool. Signed-off-by: Shlomo Pongratz <shlomop@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> [minor fix up to apply cleanly and compile fix] Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2014-02-07 14:41:38 +08:00
spin_lock_bh(&session->frwd_lock);
if (!kfifo_out(&session->cmdpool.queue,
(void*)&conn->login_task,
sizeof(void*))) {
[SCSI] libiscsi: Reduce locking contention in fast path Replace the session lock with two locks, a forward lock and a backwards lock named frwd_lock and back_lock respectively. The forward lock protects resources that change while sending a request to the target, such as cmdsn, queued_cmdsn, and allocating task from the commands' pool with kfifo_out. The backward lock protects resources that change while processing a response or in error path, such as cmdsn_exp, cmdsn_max, and returning tasks to the commands' pool with kfifo_in. Under a steady state fast-path situation, that is when one or more processes/threads submit IO to an iscsi device and a single kernel upcall (e.g softirq) is dealing with processing of responses without errors, this patch eliminates the contention between the queuecommand()/request response/scsi_done() flows associated with iscsi sessions. Between the forward and the backward locks exists a strict locking hierarchy. The mutual exclusion zone protected by the forward lock can enclose the mutual exclusion zone protected by the backward lock but not vice versa. For example, in iscsi_conn_teardown or in iscsi_xmit_data when there is a failure and __iscsi_put_task is called, the backward lock is taken while the forward lock is still taken. On the other hand, if in the RX path a nop is to be sent, for example in iscsi_handle_reject or __iscsi_complete_pdu than the forward lock is released and the backward lock is taken for the duration of iscsi_send_nopout, later the backward lock is released and the forward lock is retaken. libiscsi_tcp uses two kernel fifos the r2t pool and the r2t queue. The insertion and deletion from these queues didn't corespond to the assumption taken by the new forward/backwards session locking paradigm. That is, in iscsi_tcp_clenup_task which belongs to the RX (backwards) path, r2t is taken out from r2t queue and inserted to the r2t pool. In iscsi_tcp_get_curr_r2t which belong to the TX (forward) path, r2t is also inserted to the r2t pool and another r2t is pulled from r2t queue. Only in iscsi_tcp_r2t_rsp which is called in the RX path but can requeue to the TX path, r2t is taken from the r2t pool and inserted to the r2t queue. In order to cope with this situation, two spin locks were added, pool2queue and queue2pool. The former protects extracting from the r2t pool and inserting to the r2t queue, and the later protects the extracing from the r2t queue and inserting to the r2t pool. Signed-off-by: Shlomo Pongratz <shlomop@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> [minor fix up to apply cleanly and compile fix] Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2014-02-07 14:41:38 +08:00
spin_unlock_bh(&session->frwd_lock);
goto login_task_alloc_fail;
}
[SCSI] libiscsi: Reduce locking contention in fast path Replace the session lock with two locks, a forward lock and a backwards lock named frwd_lock and back_lock respectively. The forward lock protects resources that change while sending a request to the target, such as cmdsn, queued_cmdsn, and allocating task from the commands' pool with kfifo_out. The backward lock protects resources that change while processing a response or in error path, such as cmdsn_exp, cmdsn_max, and returning tasks to the commands' pool with kfifo_in. Under a steady state fast-path situation, that is when one or more processes/threads submit IO to an iscsi device and a single kernel upcall (e.g softirq) is dealing with processing of responses without errors, this patch eliminates the contention between the queuecommand()/request response/scsi_done() flows associated with iscsi sessions. Between the forward and the backward locks exists a strict locking hierarchy. The mutual exclusion zone protected by the forward lock can enclose the mutual exclusion zone protected by the backward lock but not vice versa. For example, in iscsi_conn_teardown or in iscsi_xmit_data when there is a failure and __iscsi_put_task is called, the backward lock is taken while the forward lock is still taken. On the other hand, if in the RX path a nop is to be sent, for example in iscsi_handle_reject or __iscsi_complete_pdu than the forward lock is released and the backward lock is taken for the duration of iscsi_send_nopout, later the backward lock is released and the forward lock is retaken. libiscsi_tcp uses two kernel fifos the r2t pool and the r2t queue. The insertion and deletion from these queues didn't corespond to the assumption taken by the new forward/backwards session locking paradigm. That is, in iscsi_tcp_clenup_task which belongs to the RX (backwards) path, r2t is taken out from r2t queue and inserted to the r2t pool. In iscsi_tcp_get_curr_r2t which belong to the TX (forward) path, r2t is also inserted to the r2t pool and another r2t is pulled from r2t queue. Only in iscsi_tcp_r2t_rsp which is called in the RX path but can requeue to the TX path, r2t is taken from the r2t pool and inserted to the r2t queue. In order to cope with this situation, two spin locks were added, pool2queue and queue2pool. The former protects extracting from the r2t pool and inserting to the r2t queue, and the later protects the extracing from the r2t queue and inserting to the r2t pool. Signed-off-by: Shlomo Pongratz <shlomop@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> [minor fix up to apply cleanly and compile fix] Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2014-02-07 14:41:38 +08:00
spin_unlock_bh(&session->frwd_lock);
data = (char *) __get_free_pages(GFP_KERNEL,
get_order(ISCSI_DEF_MAX_RECV_SEG_LEN));
if (!data)
goto login_task_data_alloc_fail;
conn->login_task->data = conn->data = data;
err = iscsi_add_conn(cls_conn);
if (err)
goto login_task_add_dev_fail;
return cls_conn;
login_task_add_dev_fail:
free_pages((unsigned long) conn->data,
get_order(ISCSI_DEF_MAX_RECV_SEG_LEN));
login_task_data_alloc_fail:
kfifo_in(&session->cmdpool.queue, (void*)&conn->login_task,
sizeof(void*));
login_task_alloc_fail:
iscsi_put_conn(cls_conn);
return NULL;
}
EXPORT_SYMBOL_GPL(iscsi_conn_setup);
/**
* iscsi_conn_teardown - teardown iscsi connection
scsi: doc: fix iscsi-related kernel-doc warnings Fix kernel-doc warnings in drivers/scsi/ that are related to iscsi support interfaces. Fixes these kernel-doc warnings: (tested by adding these files to a new target.rst documentation file: WIP) ../drivers/scsi/libiscsi.c:2740: warning: No description found for parameter 'dd_size' ../drivers/scsi/libiscsi.c:2740: warning: No description found for parameter 'id' ../drivers/scsi/libiscsi.c:2961: warning: No description found for parameter 'cls_conn' ../drivers/scsi/iscsi_tcp.c:313: warning: No description found for parameter 'conn' ../drivers/scsi/iscsi_tcp.c:363: warning: No description found for parameter 'conn' ../drivers/scsi/libiscsi_tcp.c:810: warning: No description found for parameter 'tcp_conn' ../drivers/scsi/libiscsi_tcp.c:810: warning: No description found for parameter 'segment' ../drivers/scsi/libiscsi_tcp.c:887: warning: No description found for parameter 'offloaded' ../drivers/scsi/libiscsi_tcp.c:887: warning: No description found for parameter 'status' ../drivers/scsi/libiscsi_tcp.c:887: warning: Excess function parameter 'offload' description in 'iscsi_tcp_recv_skb' ../drivers/scsi/libiscsi_tcp.c:964: warning: Excess function parameter 'conn' description in 'iscsi_tcp_task_init' ../drivers/scsi/libiscsi_tcp.c:964: warning: Excess function parameter 'sc' description in 'iscsi_tcp_task_init' Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: "Nicholas A. Bellinger" <nab@linux-iscsi.org> Cc: linux-scsi@vger.kernel.org Cc: target-devel@vger.kernel.org Cc: Sagi Grimberg <sagi@grimberg.me> Cc: linux-rdma@vger.kernel.org Cc: "James E.J. Bottomley" <jejb@linux.vnet.ibm.com> Cc: "Martin K. Petersen" <martin.petersen@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-12-23 06:08:27 +08:00
* @cls_conn: iscsi class connection
*
* TODO: we may need to make this into a two step process
* like scsi-mls remove + put host
*/
void iscsi_conn_teardown(struct iscsi_cls_conn *cls_conn)
{
struct iscsi_conn *conn = cls_conn->dd_data;
struct iscsi_session *session = conn->session;
iscsi_remove_conn(cls_conn);
del_timer_sync(&conn->transport_timer);
mutex_lock(&session->eh_mutex);
[SCSI] libiscsi: Reduce locking contention in fast path Replace the session lock with two locks, a forward lock and a backwards lock named frwd_lock and back_lock respectively. The forward lock protects resources that change while sending a request to the target, such as cmdsn, queued_cmdsn, and allocating task from the commands' pool with kfifo_out. The backward lock protects resources that change while processing a response or in error path, such as cmdsn_exp, cmdsn_max, and returning tasks to the commands' pool with kfifo_in. Under a steady state fast-path situation, that is when one or more processes/threads submit IO to an iscsi device and a single kernel upcall (e.g softirq) is dealing with processing of responses without errors, this patch eliminates the contention between the queuecommand()/request response/scsi_done() flows associated with iscsi sessions. Between the forward and the backward locks exists a strict locking hierarchy. The mutual exclusion zone protected by the forward lock can enclose the mutual exclusion zone protected by the backward lock but not vice versa. For example, in iscsi_conn_teardown or in iscsi_xmit_data when there is a failure and __iscsi_put_task is called, the backward lock is taken while the forward lock is still taken. On the other hand, if in the RX path a nop is to be sent, for example in iscsi_handle_reject or __iscsi_complete_pdu than the forward lock is released and the backward lock is taken for the duration of iscsi_send_nopout, later the backward lock is released and the forward lock is retaken. libiscsi_tcp uses two kernel fifos the r2t pool and the r2t queue. The insertion and deletion from these queues didn't corespond to the assumption taken by the new forward/backwards session locking paradigm. That is, in iscsi_tcp_clenup_task which belongs to the RX (backwards) path, r2t is taken out from r2t queue and inserted to the r2t pool. In iscsi_tcp_get_curr_r2t which belong to the TX (forward) path, r2t is also inserted to the r2t pool and another r2t is pulled from r2t queue. Only in iscsi_tcp_r2t_rsp which is called in the RX path but can requeue to the TX path, r2t is taken from the r2t pool and inserted to the r2t queue. In order to cope with this situation, two spin locks were added, pool2queue and queue2pool. The former protects extracting from the r2t pool and inserting to the r2t queue, and the later protects the extracing from the r2t queue and inserting to the r2t pool. Signed-off-by: Shlomo Pongratz <shlomop@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> [minor fix up to apply cleanly and compile fix] Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2014-02-07 14:41:38 +08:00
spin_lock_bh(&session->frwd_lock);
conn->c_stage = ISCSI_CONN_CLEANUP_WAIT;
if (session->leadconn == conn) {
/*
* leading connection? then give up on recovery.
*/
session->state = ISCSI_STATE_TERMINATE;
wake_up(&session->ehwait);
}
[SCSI] libiscsi: Reduce locking contention in fast path Replace the session lock with two locks, a forward lock and a backwards lock named frwd_lock and back_lock respectively. The forward lock protects resources that change while sending a request to the target, such as cmdsn, queued_cmdsn, and allocating task from the commands' pool with kfifo_out. The backward lock protects resources that change while processing a response or in error path, such as cmdsn_exp, cmdsn_max, and returning tasks to the commands' pool with kfifo_in. Under a steady state fast-path situation, that is when one or more processes/threads submit IO to an iscsi device and a single kernel upcall (e.g softirq) is dealing with processing of responses without errors, this patch eliminates the contention between the queuecommand()/request response/scsi_done() flows associated with iscsi sessions. Between the forward and the backward locks exists a strict locking hierarchy. The mutual exclusion zone protected by the forward lock can enclose the mutual exclusion zone protected by the backward lock but not vice versa. For example, in iscsi_conn_teardown or in iscsi_xmit_data when there is a failure and __iscsi_put_task is called, the backward lock is taken while the forward lock is still taken. On the other hand, if in the RX path a nop is to be sent, for example in iscsi_handle_reject or __iscsi_complete_pdu than the forward lock is released and the backward lock is taken for the duration of iscsi_send_nopout, later the backward lock is released and the forward lock is retaken. libiscsi_tcp uses two kernel fifos the r2t pool and the r2t queue. The insertion and deletion from these queues didn't corespond to the assumption taken by the new forward/backwards session locking paradigm. That is, in iscsi_tcp_clenup_task which belongs to the RX (backwards) path, r2t is taken out from r2t queue and inserted to the r2t pool. In iscsi_tcp_get_curr_r2t which belong to the TX (forward) path, r2t is also inserted to the r2t pool and another r2t is pulled from r2t queue. Only in iscsi_tcp_r2t_rsp which is called in the RX path but can requeue to the TX path, r2t is taken from the r2t pool and inserted to the r2t queue. In order to cope with this situation, two spin locks were added, pool2queue and queue2pool. The former protects extracting from the r2t pool and inserting to the r2t queue, and the later protects the extracing from the r2t queue and inserting to the r2t pool. Signed-off-by: Shlomo Pongratz <shlomop@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> [minor fix up to apply cleanly and compile fix] Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2014-02-07 14:41:38 +08:00
spin_unlock_bh(&session->frwd_lock);
/* flush queued up work because we free the connection below */
iscsi_suspend_tx(conn);
[SCSI] libiscsi: Reduce locking contention in fast path Replace the session lock with two locks, a forward lock and a backwards lock named frwd_lock and back_lock respectively. The forward lock protects resources that change while sending a request to the target, such as cmdsn, queued_cmdsn, and allocating task from the commands' pool with kfifo_out. The backward lock protects resources that change while processing a response or in error path, such as cmdsn_exp, cmdsn_max, and returning tasks to the commands' pool with kfifo_in. Under a steady state fast-path situation, that is when one or more processes/threads submit IO to an iscsi device and a single kernel upcall (e.g softirq) is dealing with processing of responses without errors, this patch eliminates the contention between the queuecommand()/request response/scsi_done() flows associated with iscsi sessions. Between the forward and the backward locks exists a strict locking hierarchy. The mutual exclusion zone protected by the forward lock can enclose the mutual exclusion zone protected by the backward lock but not vice versa. For example, in iscsi_conn_teardown or in iscsi_xmit_data when there is a failure and __iscsi_put_task is called, the backward lock is taken while the forward lock is still taken. On the other hand, if in the RX path a nop is to be sent, for example in iscsi_handle_reject or __iscsi_complete_pdu than the forward lock is released and the backward lock is taken for the duration of iscsi_send_nopout, later the backward lock is released and the forward lock is retaken. libiscsi_tcp uses two kernel fifos the r2t pool and the r2t queue. The insertion and deletion from these queues didn't corespond to the assumption taken by the new forward/backwards session locking paradigm. That is, in iscsi_tcp_clenup_task which belongs to the RX (backwards) path, r2t is taken out from r2t queue and inserted to the r2t pool. In iscsi_tcp_get_curr_r2t which belong to the TX (forward) path, r2t is also inserted to the r2t pool and another r2t is pulled from r2t queue. Only in iscsi_tcp_r2t_rsp which is called in the RX path but can requeue to the TX path, r2t is taken from the r2t pool and inserted to the r2t queue. In order to cope with this situation, two spin locks were added, pool2queue and queue2pool. The former protects extracting from the r2t pool and inserting to the r2t queue, and the later protects the extracing from the r2t queue and inserting to the r2t pool. Signed-off-by: Shlomo Pongratz <shlomop@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> [minor fix up to apply cleanly and compile fix] Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2014-02-07 14:41:38 +08:00
spin_lock_bh(&session->frwd_lock);
free_pages((unsigned long) conn->data,
get_order(ISCSI_DEF_MAX_RECV_SEG_LEN));
kfree(conn->persistent_address);
kfree(conn->local_ipaddr);
[SCSI] libiscsi: Reduce locking contention in fast path Replace the session lock with two locks, a forward lock and a backwards lock named frwd_lock and back_lock respectively. The forward lock protects resources that change while sending a request to the target, such as cmdsn, queued_cmdsn, and allocating task from the commands' pool with kfifo_out. The backward lock protects resources that change while processing a response or in error path, such as cmdsn_exp, cmdsn_max, and returning tasks to the commands' pool with kfifo_in. Under a steady state fast-path situation, that is when one or more processes/threads submit IO to an iscsi device and a single kernel upcall (e.g softirq) is dealing with processing of responses without errors, this patch eliminates the contention between the queuecommand()/request response/scsi_done() flows associated with iscsi sessions. Between the forward and the backward locks exists a strict locking hierarchy. The mutual exclusion zone protected by the forward lock can enclose the mutual exclusion zone protected by the backward lock but not vice versa. For example, in iscsi_conn_teardown or in iscsi_xmit_data when there is a failure and __iscsi_put_task is called, the backward lock is taken while the forward lock is still taken. On the other hand, if in the RX path a nop is to be sent, for example in iscsi_handle_reject or __iscsi_complete_pdu than the forward lock is released and the backward lock is taken for the duration of iscsi_send_nopout, later the backward lock is released and the forward lock is retaken. libiscsi_tcp uses two kernel fifos the r2t pool and the r2t queue. The insertion and deletion from these queues didn't corespond to the assumption taken by the new forward/backwards session locking paradigm. That is, in iscsi_tcp_clenup_task which belongs to the RX (backwards) path, r2t is taken out from r2t queue and inserted to the r2t pool. In iscsi_tcp_get_curr_r2t which belong to the TX (forward) path, r2t is also inserted to the r2t pool and another r2t is pulled from r2t queue. Only in iscsi_tcp_r2t_rsp which is called in the RX path but can requeue to the TX path, r2t is taken from the r2t pool and inserted to the r2t queue. In order to cope with this situation, two spin locks were added, pool2queue and queue2pool. The former protects extracting from the r2t pool and inserting to the r2t queue, and the later protects the extracing from the r2t queue and inserting to the r2t pool. Signed-off-by: Shlomo Pongratz <shlomop@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> [minor fix up to apply cleanly and compile fix] Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2014-02-07 14:41:38 +08:00
/* regular RX path uses back_lock */
spin_lock_bh(&session->back_lock);
kfifo_in(&session->cmdpool.queue, (void*)&conn->login_task,
sizeof(void*));
[SCSI] libiscsi: Reduce locking contention in fast path Replace the session lock with two locks, a forward lock and a backwards lock named frwd_lock and back_lock respectively. The forward lock protects resources that change while sending a request to the target, such as cmdsn, queued_cmdsn, and allocating task from the commands' pool with kfifo_out. The backward lock protects resources that change while processing a response or in error path, such as cmdsn_exp, cmdsn_max, and returning tasks to the commands' pool with kfifo_in. Under a steady state fast-path situation, that is when one or more processes/threads submit IO to an iscsi device and a single kernel upcall (e.g softirq) is dealing with processing of responses without errors, this patch eliminates the contention between the queuecommand()/request response/scsi_done() flows associated with iscsi sessions. Between the forward and the backward locks exists a strict locking hierarchy. The mutual exclusion zone protected by the forward lock can enclose the mutual exclusion zone protected by the backward lock but not vice versa. For example, in iscsi_conn_teardown or in iscsi_xmit_data when there is a failure and __iscsi_put_task is called, the backward lock is taken while the forward lock is still taken. On the other hand, if in the RX path a nop is to be sent, for example in iscsi_handle_reject or __iscsi_complete_pdu than the forward lock is released and the backward lock is taken for the duration of iscsi_send_nopout, later the backward lock is released and the forward lock is retaken. libiscsi_tcp uses two kernel fifos the r2t pool and the r2t queue. The insertion and deletion from these queues didn't corespond to the assumption taken by the new forward/backwards session locking paradigm. That is, in iscsi_tcp_clenup_task which belongs to the RX (backwards) path, r2t is taken out from r2t queue and inserted to the r2t pool. In iscsi_tcp_get_curr_r2t which belong to the TX (forward) path, r2t is also inserted to the r2t pool and another r2t is pulled from r2t queue. Only in iscsi_tcp_r2t_rsp which is called in the RX path but can requeue to the TX path, r2t is taken from the r2t pool and inserted to the r2t queue. In order to cope with this situation, two spin locks were added, pool2queue and queue2pool. The former protects extracting from the r2t pool and inserting to the r2t queue, and the later protects the extracing from the r2t queue and inserting to the r2t pool. Signed-off-by: Shlomo Pongratz <shlomop@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> [minor fix up to apply cleanly and compile fix] Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2014-02-07 14:41:38 +08:00
spin_unlock_bh(&session->back_lock);
if (session->leadconn == conn)
session->leadconn = NULL;
[SCSI] libiscsi: Reduce locking contention in fast path Replace the session lock with two locks, a forward lock and a backwards lock named frwd_lock and back_lock respectively. The forward lock protects resources that change while sending a request to the target, such as cmdsn, queued_cmdsn, and allocating task from the commands' pool with kfifo_out. The backward lock protects resources that change while processing a response or in error path, such as cmdsn_exp, cmdsn_max, and returning tasks to the commands' pool with kfifo_in. Under a steady state fast-path situation, that is when one or more processes/threads submit IO to an iscsi device and a single kernel upcall (e.g softirq) is dealing with processing of responses without errors, this patch eliminates the contention between the queuecommand()/request response/scsi_done() flows associated with iscsi sessions. Between the forward and the backward locks exists a strict locking hierarchy. The mutual exclusion zone protected by the forward lock can enclose the mutual exclusion zone protected by the backward lock but not vice versa. For example, in iscsi_conn_teardown or in iscsi_xmit_data when there is a failure and __iscsi_put_task is called, the backward lock is taken while the forward lock is still taken. On the other hand, if in the RX path a nop is to be sent, for example in iscsi_handle_reject or __iscsi_complete_pdu than the forward lock is released and the backward lock is taken for the duration of iscsi_send_nopout, later the backward lock is released and the forward lock is retaken. libiscsi_tcp uses two kernel fifos the r2t pool and the r2t queue. The insertion and deletion from these queues didn't corespond to the assumption taken by the new forward/backwards session locking paradigm. That is, in iscsi_tcp_clenup_task which belongs to the RX (backwards) path, r2t is taken out from r2t queue and inserted to the r2t pool. In iscsi_tcp_get_curr_r2t which belong to the TX (forward) path, r2t is also inserted to the r2t pool and another r2t is pulled from r2t queue. Only in iscsi_tcp_r2t_rsp which is called in the RX path but can requeue to the TX path, r2t is taken from the r2t pool and inserted to the r2t queue. In order to cope with this situation, two spin locks were added, pool2queue and queue2pool. The former protects extracting from the r2t pool and inserting to the r2t queue, and the later protects the extracing from the r2t queue and inserting to the r2t pool. Signed-off-by: Shlomo Pongratz <shlomop@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> [minor fix up to apply cleanly and compile fix] Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2014-02-07 14:41:38 +08:00
spin_unlock_bh(&session->frwd_lock);
mutex_unlock(&session->eh_mutex);
iscsi_put_conn(cls_conn);
}
EXPORT_SYMBOL_GPL(iscsi_conn_teardown);
int iscsi_conn_start(struct iscsi_cls_conn *cls_conn)
{
struct iscsi_conn *conn = cls_conn->dd_data;
struct iscsi_session *session = conn->session;
if (!session) {
iscsi_conn_printk(KERN_ERR, conn,
"can't start unbound connection\n");
return -EPERM;
}
if ((session->imm_data_en || !session->initial_r2t_en) &&
session->first_burst > session->max_burst) {
iscsi_conn_printk(KERN_INFO, conn, "invalid burst lengths: "
"first_burst %d max_burst %d\n",
session->first_burst, session->max_burst);
return -EINVAL;
}
if (conn->ping_timeout && !conn->recv_timeout) {
iscsi_conn_printk(KERN_ERR, conn, "invalid recv timeout of "
"zero. Using 5 seconds\n.");
conn->recv_timeout = 5;
}
if (conn->recv_timeout && !conn->ping_timeout) {
iscsi_conn_printk(KERN_ERR, conn, "invalid ping timeout of "
"zero. Using 5 seconds.\n");
conn->ping_timeout = 5;
}
[SCSI] libiscsi: Reduce locking contention in fast path Replace the session lock with two locks, a forward lock and a backwards lock named frwd_lock and back_lock respectively. The forward lock protects resources that change while sending a request to the target, such as cmdsn, queued_cmdsn, and allocating task from the commands' pool with kfifo_out. The backward lock protects resources that change while processing a response or in error path, such as cmdsn_exp, cmdsn_max, and returning tasks to the commands' pool with kfifo_in. Under a steady state fast-path situation, that is when one or more processes/threads submit IO to an iscsi device and a single kernel upcall (e.g softirq) is dealing with processing of responses without errors, this patch eliminates the contention between the queuecommand()/request response/scsi_done() flows associated with iscsi sessions. Between the forward and the backward locks exists a strict locking hierarchy. The mutual exclusion zone protected by the forward lock can enclose the mutual exclusion zone protected by the backward lock but not vice versa. For example, in iscsi_conn_teardown or in iscsi_xmit_data when there is a failure and __iscsi_put_task is called, the backward lock is taken while the forward lock is still taken. On the other hand, if in the RX path a nop is to be sent, for example in iscsi_handle_reject or __iscsi_complete_pdu than the forward lock is released and the backward lock is taken for the duration of iscsi_send_nopout, later the backward lock is released and the forward lock is retaken. libiscsi_tcp uses two kernel fifos the r2t pool and the r2t queue. The insertion and deletion from these queues didn't corespond to the assumption taken by the new forward/backwards session locking paradigm. That is, in iscsi_tcp_clenup_task which belongs to the RX (backwards) path, r2t is taken out from r2t queue and inserted to the r2t pool. In iscsi_tcp_get_curr_r2t which belong to the TX (forward) path, r2t is also inserted to the r2t pool and another r2t is pulled from r2t queue. Only in iscsi_tcp_r2t_rsp which is called in the RX path but can requeue to the TX path, r2t is taken from the r2t pool and inserted to the r2t queue. In order to cope with this situation, two spin locks were added, pool2queue and queue2pool. The former protects extracting from the r2t pool and inserting to the r2t queue, and the later protects the extracing from the r2t queue and inserting to the r2t pool. Signed-off-by: Shlomo Pongratz <shlomop@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> [minor fix up to apply cleanly and compile fix] Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2014-02-07 14:41:38 +08:00
spin_lock_bh(&session->frwd_lock);
conn->c_stage = ISCSI_CONN_STARTED;
session->state = ISCSI_STATE_LOGGED_IN;
session->queued_cmdsn = session->cmdsn;
conn->last_recv = jiffies;
conn->last_ping = jiffies;
if (conn->recv_timeout && conn->ping_timeout)
mod_timer(&conn->transport_timer,
jiffies + (conn->recv_timeout * HZ));
switch(conn->stop_stage) {
case STOP_CONN_RECOVER:
/*
* unblock eh_abort() if it is blocked. re-try all
* commands after successful recovery
*/
conn->stop_stage = 0;
session->tmf_state = TMF_INITIAL;
session->age++;
if (session->age == 16)
session->age = 0;
break;
case STOP_CONN_TERM:
conn->stop_stage = 0;
break;
default:
break;
}
[SCSI] libiscsi: Reduce locking contention in fast path Replace the session lock with two locks, a forward lock and a backwards lock named frwd_lock and back_lock respectively. The forward lock protects resources that change while sending a request to the target, such as cmdsn, queued_cmdsn, and allocating task from the commands' pool with kfifo_out. The backward lock protects resources that change while processing a response or in error path, such as cmdsn_exp, cmdsn_max, and returning tasks to the commands' pool with kfifo_in. Under a steady state fast-path situation, that is when one or more processes/threads submit IO to an iscsi device and a single kernel upcall (e.g softirq) is dealing with processing of responses without errors, this patch eliminates the contention between the queuecommand()/request response/scsi_done() flows associated with iscsi sessions. Between the forward and the backward locks exists a strict locking hierarchy. The mutual exclusion zone protected by the forward lock can enclose the mutual exclusion zone protected by the backward lock but not vice versa. For example, in iscsi_conn_teardown or in iscsi_xmit_data when there is a failure and __iscsi_put_task is called, the backward lock is taken while the forward lock is still taken. On the other hand, if in the RX path a nop is to be sent, for example in iscsi_handle_reject or __iscsi_complete_pdu than the forward lock is released and the backward lock is taken for the duration of iscsi_send_nopout, later the backward lock is released and the forward lock is retaken. libiscsi_tcp uses two kernel fifos the r2t pool and the r2t queue. The insertion and deletion from these queues didn't corespond to the assumption taken by the new forward/backwards session locking paradigm. That is, in iscsi_tcp_clenup_task which belongs to the RX (backwards) path, r2t is taken out from r2t queue and inserted to the r2t pool. In iscsi_tcp_get_curr_r2t which belong to the TX (forward) path, r2t is also inserted to the r2t pool and another r2t is pulled from r2t queue. Only in iscsi_tcp_r2t_rsp which is called in the RX path but can requeue to the TX path, r2t is taken from the r2t pool and inserted to the r2t queue. In order to cope with this situation, two spin locks were added, pool2queue and queue2pool. The former protects extracting from the r2t pool and inserting to the r2t queue, and the later protects the extracing from the r2t queue and inserting to the r2t pool. Signed-off-by: Shlomo Pongratz <shlomop@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> [minor fix up to apply cleanly and compile fix] Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2014-02-07 14:41:38 +08:00
spin_unlock_bh(&session->frwd_lock);
iscsi_unblock_session(session->cls_session);
wake_up(&session->ehwait);
return 0;
}
EXPORT_SYMBOL_GPL(iscsi_conn_start);
static void
fail_mgmt_tasks(struct iscsi_session *session, struct iscsi_conn *conn)
{
struct iscsi_task *task;
int i, state;
for (i = 0; i < conn->session->cmds_max; i++) {
task = conn->session->cmds[i];
if (task->sc)
continue;
if (task->state == ISCSI_TASK_FREE)
continue;
ISCSI_DBG_SESSION(conn->session,
"failing mgmt itt 0x%x state %d\n",
task->itt, task->state);
spin_lock_bh(&session->back_lock);
if (cleanup_queued_task(task)) {
spin_unlock_bh(&session->back_lock);
continue;
}
state = ISCSI_TASK_ABRT_SESS_RECOV;
if (task->state == ISCSI_TASK_PENDING)
state = ISCSI_TASK_COMPLETED;
iscsi_complete_task(task, state);
spin_unlock_bh(&session->back_lock);
}
}
void iscsi_conn_stop(struct iscsi_cls_conn *cls_conn, int flag)
{
struct iscsi_conn *conn = cls_conn->dd_data;
struct iscsi_session *session = conn->session;
int old_stop_stage;
mutex_lock(&session->eh_mutex);
[SCSI] libiscsi: Reduce locking contention in fast path Replace the session lock with two locks, a forward lock and a backwards lock named frwd_lock and back_lock respectively. The forward lock protects resources that change while sending a request to the target, such as cmdsn, queued_cmdsn, and allocating task from the commands' pool with kfifo_out. The backward lock protects resources that change while processing a response or in error path, such as cmdsn_exp, cmdsn_max, and returning tasks to the commands' pool with kfifo_in. Under a steady state fast-path situation, that is when one or more processes/threads submit IO to an iscsi device and a single kernel upcall (e.g softirq) is dealing with processing of responses without errors, this patch eliminates the contention between the queuecommand()/request response/scsi_done() flows associated with iscsi sessions. Between the forward and the backward locks exists a strict locking hierarchy. The mutual exclusion zone protected by the forward lock can enclose the mutual exclusion zone protected by the backward lock but not vice versa. For example, in iscsi_conn_teardown or in iscsi_xmit_data when there is a failure and __iscsi_put_task is called, the backward lock is taken while the forward lock is still taken. On the other hand, if in the RX path a nop is to be sent, for example in iscsi_handle_reject or __iscsi_complete_pdu than the forward lock is released and the backward lock is taken for the duration of iscsi_send_nopout, later the backward lock is released and the forward lock is retaken. libiscsi_tcp uses two kernel fifos the r2t pool and the r2t queue. The insertion and deletion from these queues didn't corespond to the assumption taken by the new forward/backwards session locking paradigm. That is, in iscsi_tcp_clenup_task which belongs to the RX (backwards) path, r2t is taken out from r2t queue and inserted to the r2t pool. In iscsi_tcp_get_curr_r2t which belong to the TX (forward) path, r2t is also inserted to the r2t pool and another r2t is pulled from r2t queue. Only in iscsi_tcp_r2t_rsp which is called in the RX path but can requeue to the TX path, r2t is taken from the r2t pool and inserted to the r2t queue. In order to cope with this situation, two spin locks were added, pool2queue and queue2pool. The former protects extracting from the r2t pool and inserting to the r2t queue, and the later protects the extracing from the r2t queue and inserting to the r2t pool. Signed-off-by: Shlomo Pongratz <shlomop@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> [minor fix up to apply cleanly and compile fix] Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2014-02-07 14:41:38 +08:00
spin_lock_bh(&session->frwd_lock);
if (conn->stop_stage == STOP_CONN_TERM) {
[SCSI] libiscsi: Reduce locking contention in fast path Replace the session lock with two locks, a forward lock and a backwards lock named frwd_lock and back_lock respectively. The forward lock protects resources that change while sending a request to the target, such as cmdsn, queued_cmdsn, and allocating task from the commands' pool with kfifo_out. The backward lock protects resources that change while processing a response or in error path, such as cmdsn_exp, cmdsn_max, and returning tasks to the commands' pool with kfifo_in. Under a steady state fast-path situation, that is when one or more processes/threads submit IO to an iscsi device and a single kernel upcall (e.g softirq) is dealing with processing of responses without errors, this patch eliminates the contention between the queuecommand()/request response/scsi_done() flows associated with iscsi sessions. Between the forward and the backward locks exists a strict locking hierarchy. The mutual exclusion zone protected by the forward lock can enclose the mutual exclusion zone protected by the backward lock but not vice versa. For example, in iscsi_conn_teardown or in iscsi_xmit_data when there is a failure and __iscsi_put_task is called, the backward lock is taken while the forward lock is still taken. On the other hand, if in the RX path a nop is to be sent, for example in iscsi_handle_reject or __iscsi_complete_pdu than the forward lock is released and the backward lock is taken for the duration of iscsi_send_nopout, later the backward lock is released and the forward lock is retaken. libiscsi_tcp uses two kernel fifos the r2t pool and the r2t queue. The insertion and deletion from these queues didn't corespond to the assumption taken by the new forward/backwards session locking paradigm. That is, in iscsi_tcp_clenup_task which belongs to the RX (backwards) path, r2t is taken out from r2t queue and inserted to the r2t pool. In iscsi_tcp_get_curr_r2t which belong to the TX (forward) path, r2t is also inserted to the r2t pool and another r2t is pulled from r2t queue. Only in iscsi_tcp_r2t_rsp which is called in the RX path but can requeue to the TX path, r2t is taken from the r2t pool and inserted to the r2t queue. In order to cope with this situation, two spin locks were added, pool2queue and queue2pool. The former protects extracting from the r2t pool and inserting to the r2t queue, and the later protects the extracing from the r2t queue and inserting to the r2t pool. Signed-off-by: Shlomo Pongratz <shlomop@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> [minor fix up to apply cleanly and compile fix] Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2014-02-07 14:41:38 +08:00
spin_unlock_bh(&session->frwd_lock);
mutex_unlock(&session->eh_mutex);
return;
}
/*
* When this is called for the in_login state, we only want to clean
* up the login task and connection. We do not need to block and set
* the recovery state again
*/
if (flag == STOP_CONN_TERM)
session->state = ISCSI_STATE_TERMINATE;
else if (conn->stop_stage != STOP_CONN_RECOVER)
session->state = ISCSI_STATE_IN_RECOVERY;
old_stop_stage = conn->stop_stage;
conn->stop_stage = flag;
[SCSI] libiscsi: Reduce locking contention in fast path Replace the session lock with two locks, a forward lock and a backwards lock named frwd_lock and back_lock respectively. The forward lock protects resources that change while sending a request to the target, such as cmdsn, queued_cmdsn, and allocating task from the commands' pool with kfifo_out. The backward lock protects resources that change while processing a response or in error path, such as cmdsn_exp, cmdsn_max, and returning tasks to the commands' pool with kfifo_in. Under a steady state fast-path situation, that is when one or more processes/threads submit IO to an iscsi device and a single kernel upcall (e.g softirq) is dealing with processing of responses without errors, this patch eliminates the contention between the queuecommand()/request response/scsi_done() flows associated with iscsi sessions. Between the forward and the backward locks exists a strict locking hierarchy. The mutual exclusion zone protected by the forward lock can enclose the mutual exclusion zone protected by the backward lock but not vice versa. For example, in iscsi_conn_teardown or in iscsi_xmit_data when there is a failure and __iscsi_put_task is called, the backward lock is taken while the forward lock is still taken. On the other hand, if in the RX path a nop is to be sent, for example in iscsi_handle_reject or __iscsi_complete_pdu than the forward lock is released and the backward lock is taken for the duration of iscsi_send_nopout, later the backward lock is released and the forward lock is retaken. libiscsi_tcp uses two kernel fifos the r2t pool and the r2t queue. The insertion and deletion from these queues didn't corespond to the assumption taken by the new forward/backwards session locking paradigm. That is, in iscsi_tcp_clenup_task which belongs to the RX (backwards) path, r2t is taken out from r2t queue and inserted to the r2t pool. In iscsi_tcp_get_curr_r2t which belong to the TX (forward) path, r2t is also inserted to the r2t pool and another r2t is pulled from r2t queue. Only in iscsi_tcp_r2t_rsp which is called in the RX path but can requeue to the TX path, r2t is taken from the r2t pool and inserted to the r2t queue. In order to cope with this situation, two spin locks were added, pool2queue and queue2pool. The former protects extracting from the r2t pool and inserting to the r2t queue, and the later protects the extracing from the r2t queue and inserting to the r2t pool. Signed-off-by: Shlomo Pongratz <shlomop@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> [minor fix up to apply cleanly and compile fix] Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2014-02-07 14:41:38 +08:00
spin_unlock_bh(&session->frwd_lock);
del_timer_sync(&conn->transport_timer);
iscsi_suspend_tx(conn);
[SCSI] libiscsi: Reduce locking contention in fast path Replace the session lock with two locks, a forward lock and a backwards lock named frwd_lock and back_lock respectively. The forward lock protects resources that change while sending a request to the target, such as cmdsn, queued_cmdsn, and allocating task from the commands' pool with kfifo_out. The backward lock protects resources that change while processing a response or in error path, such as cmdsn_exp, cmdsn_max, and returning tasks to the commands' pool with kfifo_in. Under a steady state fast-path situation, that is when one or more processes/threads submit IO to an iscsi device and a single kernel upcall (e.g softirq) is dealing with processing of responses without errors, this patch eliminates the contention between the queuecommand()/request response/scsi_done() flows associated with iscsi sessions. Between the forward and the backward locks exists a strict locking hierarchy. The mutual exclusion zone protected by the forward lock can enclose the mutual exclusion zone protected by the backward lock but not vice versa. For example, in iscsi_conn_teardown or in iscsi_xmit_data when there is a failure and __iscsi_put_task is called, the backward lock is taken while the forward lock is still taken. On the other hand, if in the RX path a nop is to be sent, for example in iscsi_handle_reject or __iscsi_complete_pdu than the forward lock is released and the backward lock is taken for the duration of iscsi_send_nopout, later the backward lock is released and the forward lock is retaken. libiscsi_tcp uses two kernel fifos the r2t pool and the r2t queue. The insertion and deletion from these queues didn't corespond to the assumption taken by the new forward/backwards session locking paradigm. That is, in iscsi_tcp_clenup_task which belongs to the RX (backwards) path, r2t is taken out from r2t queue and inserted to the r2t pool. In iscsi_tcp_get_curr_r2t which belong to the TX (forward) path, r2t is also inserted to the r2t pool and another r2t is pulled from r2t queue. Only in iscsi_tcp_r2t_rsp which is called in the RX path but can requeue to the TX path, r2t is taken from the r2t pool and inserted to the r2t queue. In order to cope with this situation, two spin locks were added, pool2queue and queue2pool. The former protects extracting from the r2t pool and inserting to the r2t queue, and the later protects the extracing from the r2t queue and inserting to the r2t pool. Signed-off-by: Shlomo Pongratz <shlomop@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> [minor fix up to apply cleanly and compile fix] Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2014-02-07 14:41:38 +08:00
spin_lock_bh(&session->frwd_lock);
conn->c_stage = ISCSI_CONN_STOPPED;
[SCSI] libiscsi: Reduce locking contention in fast path Replace the session lock with two locks, a forward lock and a backwards lock named frwd_lock and back_lock respectively. The forward lock protects resources that change while sending a request to the target, such as cmdsn, queued_cmdsn, and allocating task from the commands' pool with kfifo_out. The backward lock protects resources that change while processing a response or in error path, such as cmdsn_exp, cmdsn_max, and returning tasks to the commands' pool with kfifo_in. Under a steady state fast-path situation, that is when one or more processes/threads submit IO to an iscsi device and a single kernel upcall (e.g softirq) is dealing with processing of responses without errors, this patch eliminates the contention between the queuecommand()/request response/scsi_done() flows associated with iscsi sessions. Between the forward and the backward locks exists a strict locking hierarchy. The mutual exclusion zone protected by the forward lock can enclose the mutual exclusion zone protected by the backward lock but not vice versa. For example, in iscsi_conn_teardown or in iscsi_xmit_data when there is a failure and __iscsi_put_task is called, the backward lock is taken while the forward lock is still taken. On the other hand, if in the RX path a nop is to be sent, for example in iscsi_handle_reject or __iscsi_complete_pdu than the forward lock is released and the backward lock is taken for the duration of iscsi_send_nopout, later the backward lock is released and the forward lock is retaken. libiscsi_tcp uses two kernel fifos the r2t pool and the r2t queue. The insertion and deletion from these queues didn't corespond to the assumption taken by the new forward/backwards session locking paradigm. That is, in iscsi_tcp_clenup_task which belongs to the RX (backwards) path, r2t is taken out from r2t queue and inserted to the r2t pool. In iscsi_tcp_get_curr_r2t which belong to the TX (forward) path, r2t is also inserted to the r2t pool and another r2t is pulled from r2t queue. Only in iscsi_tcp_r2t_rsp which is called in the RX path but can requeue to the TX path, r2t is taken from the r2t pool and inserted to the r2t queue. In order to cope with this situation, two spin locks were added, pool2queue and queue2pool. The former protects extracting from the r2t pool and inserting to the r2t queue, and the later protects the extracing from the r2t queue and inserting to the r2t pool. Signed-off-by: Shlomo Pongratz <shlomop@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> [minor fix up to apply cleanly and compile fix] Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2014-02-07 14:41:38 +08:00
spin_unlock_bh(&session->frwd_lock);
/*
* for connection level recovery we should not calculate
* header digest. conn->hdr_size used for optimization
* in hdr_extract() and will be re-negotiated at
* set_param() time.
*/
if (flag == STOP_CONN_RECOVER) {
conn->hdrdgst_en = 0;
conn->datadgst_en = 0;
if (session->state == ISCSI_STATE_IN_RECOVERY &&
old_stop_stage != STOP_CONN_RECOVER) {
ISCSI_DBG_SESSION(session, "blocking session\n");
iscsi_block_session(session->cls_session);
}
}
/*
* flush queues.
*/
[SCSI] libiscsi: Reduce locking contention in fast path Replace the session lock with two locks, a forward lock and a backwards lock named frwd_lock and back_lock respectively. The forward lock protects resources that change while sending a request to the target, such as cmdsn, queued_cmdsn, and allocating task from the commands' pool with kfifo_out. The backward lock protects resources that change while processing a response or in error path, such as cmdsn_exp, cmdsn_max, and returning tasks to the commands' pool with kfifo_in. Under a steady state fast-path situation, that is when one or more processes/threads submit IO to an iscsi device and a single kernel upcall (e.g softirq) is dealing with processing of responses without errors, this patch eliminates the contention between the queuecommand()/request response/scsi_done() flows associated with iscsi sessions. Between the forward and the backward locks exists a strict locking hierarchy. The mutual exclusion zone protected by the forward lock can enclose the mutual exclusion zone protected by the backward lock but not vice versa. For example, in iscsi_conn_teardown or in iscsi_xmit_data when there is a failure and __iscsi_put_task is called, the backward lock is taken while the forward lock is still taken. On the other hand, if in the RX path a nop is to be sent, for example in iscsi_handle_reject or __iscsi_complete_pdu than the forward lock is released and the backward lock is taken for the duration of iscsi_send_nopout, later the backward lock is released and the forward lock is retaken. libiscsi_tcp uses two kernel fifos the r2t pool and the r2t queue. The insertion and deletion from these queues didn't corespond to the assumption taken by the new forward/backwards session locking paradigm. That is, in iscsi_tcp_clenup_task which belongs to the RX (backwards) path, r2t is taken out from r2t queue and inserted to the r2t pool. In iscsi_tcp_get_curr_r2t which belong to the TX (forward) path, r2t is also inserted to the r2t pool and another r2t is pulled from r2t queue. Only in iscsi_tcp_r2t_rsp which is called in the RX path but can requeue to the TX path, r2t is taken from the r2t pool and inserted to the r2t queue. In order to cope with this situation, two spin locks were added, pool2queue and queue2pool. The former protects extracting from the r2t pool and inserting to the r2t queue, and the later protects the extracing from the r2t queue and inserting to the r2t pool. Signed-off-by: Shlomo Pongratz <shlomop@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> [minor fix up to apply cleanly and compile fix] Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2014-02-07 14:41:38 +08:00
spin_lock_bh(&session->frwd_lock);
fail_scsi_tasks(conn, -1, DID_TRANSPORT_DISRUPTED);
fail_mgmt_tasks(session, conn);
memset(&session->tmhdr, 0, sizeof(session->tmhdr));
[SCSI] libiscsi: Reduce locking contention in fast path Replace the session lock with two locks, a forward lock and a backwards lock named frwd_lock and back_lock respectively. The forward lock protects resources that change while sending a request to the target, such as cmdsn, queued_cmdsn, and allocating task from the commands' pool with kfifo_out. The backward lock protects resources that change while processing a response or in error path, such as cmdsn_exp, cmdsn_max, and returning tasks to the commands' pool with kfifo_in. Under a steady state fast-path situation, that is when one or more processes/threads submit IO to an iscsi device and a single kernel upcall (e.g softirq) is dealing with processing of responses without errors, this patch eliminates the contention between the queuecommand()/request response/scsi_done() flows associated with iscsi sessions. Between the forward and the backward locks exists a strict locking hierarchy. The mutual exclusion zone protected by the forward lock can enclose the mutual exclusion zone protected by the backward lock but not vice versa. For example, in iscsi_conn_teardown or in iscsi_xmit_data when there is a failure and __iscsi_put_task is called, the backward lock is taken while the forward lock is still taken. On the other hand, if in the RX path a nop is to be sent, for example in iscsi_handle_reject or __iscsi_complete_pdu than the forward lock is released and the backward lock is taken for the duration of iscsi_send_nopout, later the backward lock is released and the forward lock is retaken. libiscsi_tcp uses two kernel fifos the r2t pool and the r2t queue. The insertion and deletion from these queues didn't corespond to the assumption taken by the new forward/backwards session locking paradigm. That is, in iscsi_tcp_clenup_task which belongs to the RX (backwards) path, r2t is taken out from r2t queue and inserted to the r2t pool. In iscsi_tcp_get_curr_r2t which belong to the TX (forward) path, r2t is also inserted to the r2t pool and another r2t is pulled from r2t queue. Only in iscsi_tcp_r2t_rsp which is called in the RX path but can requeue to the TX path, r2t is taken from the r2t pool and inserted to the r2t queue. In order to cope with this situation, two spin locks were added, pool2queue and queue2pool. The former protects extracting from the r2t pool and inserting to the r2t queue, and the later protects the extracing from the r2t queue and inserting to the r2t pool. Signed-off-by: Shlomo Pongratz <shlomop@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> [minor fix up to apply cleanly and compile fix] Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2014-02-07 14:41:38 +08:00
spin_unlock_bh(&session->frwd_lock);
mutex_unlock(&session->eh_mutex);
}
EXPORT_SYMBOL_GPL(iscsi_conn_stop);
int iscsi_conn_bind(struct iscsi_cls_session *cls_session,
struct iscsi_cls_conn *cls_conn, int is_leading)
{
struct iscsi_session *session = cls_session->dd_data;
struct iscsi_conn *conn = cls_conn->dd_data;
[SCSI] libiscsi: Reduce locking contention in fast path Replace the session lock with two locks, a forward lock and a backwards lock named frwd_lock and back_lock respectively. The forward lock protects resources that change while sending a request to the target, such as cmdsn, queued_cmdsn, and allocating task from the commands' pool with kfifo_out. The backward lock protects resources that change while processing a response or in error path, such as cmdsn_exp, cmdsn_max, and returning tasks to the commands' pool with kfifo_in. Under a steady state fast-path situation, that is when one or more processes/threads submit IO to an iscsi device and a single kernel upcall (e.g softirq) is dealing with processing of responses without errors, this patch eliminates the contention between the queuecommand()/request response/scsi_done() flows associated with iscsi sessions. Between the forward and the backward locks exists a strict locking hierarchy. The mutual exclusion zone protected by the forward lock can enclose the mutual exclusion zone protected by the backward lock but not vice versa. For example, in iscsi_conn_teardown or in iscsi_xmit_data when there is a failure and __iscsi_put_task is called, the backward lock is taken while the forward lock is still taken. On the other hand, if in the RX path a nop is to be sent, for example in iscsi_handle_reject or __iscsi_complete_pdu than the forward lock is released and the backward lock is taken for the duration of iscsi_send_nopout, later the backward lock is released and the forward lock is retaken. libiscsi_tcp uses two kernel fifos the r2t pool and the r2t queue. The insertion and deletion from these queues didn't corespond to the assumption taken by the new forward/backwards session locking paradigm. That is, in iscsi_tcp_clenup_task which belongs to the RX (backwards) path, r2t is taken out from r2t queue and inserted to the r2t pool. In iscsi_tcp_get_curr_r2t which belong to the TX (forward) path, r2t is also inserted to the r2t pool and another r2t is pulled from r2t queue. Only in iscsi_tcp_r2t_rsp which is called in the RX path but can requeue to the TX path, r2t is taken from the r2t pool and inserted to the r2t queue. In order to cope with this situation, two spin locks were added, pool2queue and queue2pool. The former protects extracting from the r2t pool and inserting to the r2t queue, and the later protects the extracing from the r2t queue and inserting to the r2t pool. Signed-off-by: Shlomo Pongratz <shlomop@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> [minor fix up to apply cleanly and compile fix] Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2014-02-07 14:41:38 +08:00
spin_lock_bh(&session->frwd_lock);
if (is_leading)
session->leadconn = conn;
set_bit(ISCSI_CONN_FLAG_BOUND, &conn->flags);
[SCSI] libiscsi: Reduce locking contention in fast path Replace the session lock with two locks, a forward lock and a backwards lock named frwd_lock and back_lock respectively. The forward lock protects resources that change while sending a request to the target, such as cmdsn, queued_cmdsn, and allocating task from the commands' pool with kfifo_out. The backward lock protects resources that change while processing a response or in error path, such as cmdsn_exp, cmdsn_max, and returning tasks to the commands' pool with kfifo_in. Under a steady state fast-path situation, that is when one or more processes/threads submit IO to an iscsi device and a single kernel upcall (e.g softirq) is dealing with processing of responses without errors, this patch eliminates the contention between the queuecommand()/request response/scsi_done() flows associated with iscsi sessions. Between the forward and the backward locks exists a strict locking hierarchy. The mutual exclusion zone protected by the forward lock can enclose the mutual exclusion zone protected by the backward lock but not vice versa. For example, in iscsi_conn_teardown or in iscsi_xmit_data when there is a failure and __iscsi_put_task is called, the backward lock is taken while the forward lock is still taken. On the other hand, if in the RX path a nop is to be sent, for example in iscsi_handle_reject or __iscsi_complete_pdu than the forward lock is released and the backward lock is taken for the duration of iscsi_send_nopout, later the backward lock is released and the forward lock is retaken. libiscsi_tcp uses two kernel fifos the r2t pool and the r2t queue. The insertion and deletion from these queues didn't corespond to the assumption taken by the new forward/backwards session locking paradigm. That is, in iscsi_tcp_clenup_task which belongs to the RX (backwards) path, r2t is taken out from r2t queue and inserted to the r2t pool. In iscsi_tcp_get_curr_r2t which belong to the TX (forward) path, r2t is also inserted to the r2t pool and another r2t is pulled from r2t queue. Only in iscsi_tcp_r2t_rsp which is called in the RX path but can requeue to the TX path, r2t is taken from the r2t pool and inserted to the r2t queue. In order to cope with this situation, two spin locks were added, pool2queue and queue2pool. The former protects extracting from the r2t pool and inserting to the r2t queue, and the later protects the extracing from the r2t queue and inserting to the r2t pool. Signed-off-by: Shlomo Pongratz <shlomop@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> [minor fix up to apply cleanly and compile fix] Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2014-02-07 14:41:38 +08:00
spin_unlock_bh(&session->frwd_lock);
/*
* The target could have reduced it's window size between logins, so
* we have to reset max/exp cmdsn so we can see the new values.
*/
spin_lock_bh(&session->back_lock);
session->max_cmdsn = session->exp_cmdsn = session->cmdsn + 1;
spin_unlock_bh(&session->back_lock);
/*
* Unblock xmitworker(), Login Phase will pass through.
*/
clear_bit(ISCSI_CONN_FLAG_SUSPEND_RX, &conn->flags);
clear_bit(ISCSI_CONN_FLAG_SUSPEND_TX, &conn->flags);
return 0;
}
EXPORT_SYMBOL_GPL(iscsi_conn_bind);
int iscsi_switch_str_param(char **param, char *new_val_buf)
{
char *new_val;
if (*param) {
if (!strcmp(*param, new_val_buf))
return 0;
}
new_val = kstrdup(new_val_buf, GFP_NOIO);
if (!new_val)
return -ENOMEM;
kfree(*param);
*param = new_val;
return 0;
}
EXPORT_SYMBOL_GPL(iscsi_switch_str_param);
int iscsi_set_param(struct iscsi_cls_conn *cls_conn,
enum iscsi_param param, char *buf, int buflen)
{
struct iscsi_conn *conn = cls_conn->dd_data;
struct iscsi_session *session = conn->session;
int val;
switch(param) {
case ISCSI_PARAM_FAST_ABORT:
sscanf(buf, "%d", &session->fast_abort);
break;
case ISCSI_PARAM_ABORT_TMO:
sscanf(buf, "%d", &session->abort_timeout);
break;
case ISCSI_PARAM_LU_RESET_TMO:
sscanf(buf, "%d", &session->lu_reset_timeout);
break;
case ISCSI_PARAM_TGT_RESET_TMO:
sscanf(buf, "%d", &session->tgt_reset_timeout);
break;
case ISCSI_PARAM_PING_TMO:
sscanf(buf, "%d", &conn->ping_timeout);
break;
case ISCSI_PARAM_RECV_TMO:
sscanf(buf, "%d", &conn->recv_timeout);
break;
case ISCSI_PARAM_MAX_RECV_DLENGTH:
sscanf(buf, "%d", &conn->max_recv_dlength);
break;
case ISCSI_PARAM_MAX_XMIT_DLENGTH:
sscanf(buf, "%d", &conn->max_xmit_dlength);
break;
case ISCSI_PARAM_HDRDGST_EN:
sscanf(buf, "%d", &conn->hdrdgst_en);
break;
case ISCSI_PARAM_DATADGST_EN:
sscanf(buf, "%d", &conn->datadgst_en);
break;
case ISCSI_PARAM_INITIAL_R2T_EN:
sscanf(buf, "%d", &session->initial_r2t_en);
break;
case ISCSI_PARAM_MAX_R2T:
sscanf(buf, "%hu", &session->max_r2t);
break;
case ISCSI_PARAM_IMM_DATA_EN:
sscanf(buf, "%d", &session->imm_data_en);
break;
case ISCSI_PARAM_FIRST_BURST:
sscanf(buf, "%d", &session->first_burst);
break;
case ISCSI_PARAM_MAX_BURST:
sscanf(buf, "%d", &session->max_burst);
break;
case ISCSI_PARAM_PDU_INORDER_EN:
sscanf(buf, "%d", &session->pdu_inorder_en);
break;
case ISCSI_PARAM_DATASEQ_INORDER_EN:
sscanf(buf, "%d", &session->dataseq_inorder_en);
break;
case ISCSI_PARAM_ERL:
sscanf(buf, "%d", &session->erl);
break;
case ISCSI_PARAM_EXP_STATSN:
sscanf(buf, "%u", &conn->exp_statsn);
break;
case ISCSI_PARAM_USERNAME:
return iscsi_switch_str_param(&session->username, buf);
case ISCSI_PARAM_USERNAME_IN:
return iscsi_switch_str_param(&session->username_in, buf);
case ISCSI_PARAM_PASSWORD:
return iscsi_switch_str_param(&session->password, buf);
case ISCSI_PARAM_PASSWORD_IN:
return iscsi_switch_str_param(&session->password_in, buf);
case ISCSI_PARAM_TARGET_NAME:
return iscsi_switch_str_param(&session->targetname, buf);
case ISCSI_PARAM_TARGET_ALIAS:
return iscsi_switch_str_param(&session->targetalias, buf);
case ISCSI_PARAM_TPGT:
sscanf(buf, "%d", &session->tpgt);
break;
case ISCSI_PARAM_PERSISTENT_PORT:
sscanf(buf, "%d", &conn->persistent_port);
break;
case ISCSI_PARAM_PERSISTENT_ADDRESS:
return iscsi_switch_str_param(&conn->persistent_address, buf);
case ISCSI_PARAM_IFACE_NAME:
return iscsi_switch_str_param(&session->ifacename, buf);
case ISCSI_PARAM_INITIATOR_NAME:
return iscsi_switch_str_param(&session->initiatorname, buf);
case ISCSI_PARAM_BOOT_ROOT:
return iscsi_switch_str_param(&session->boot_root, buf);
case ISCSI_PARAM_BOOT_NIC:
return iscsi_switch_str_param(&session->boot_nic, buf);
case ISCSI_PARAM_BOOT_TARGET:
return iscsi_switch_str_param(&session->boot_target, buf);
case ISCSI_PARAM_PORTAL_TYPE:
return iscsi_switch_str_param(&session->portal_type, buf);
case ISCSI_PARAM_DISCOVERY_PARENT_TYPE:
return iscsi_switch_str_param(&session->discovery_parent_type,
buf);
case ISCSI_PARAM_DISCOVERY_SESS:
sscanf(buf, "%d", &val);
session->discovery_sess = !!val;
break;
case ISCSI_PARAM_LOCAL_IPADDR:
return iscsi_switch_str_param(&conn->local_ipaddr, buf);
default:
return -ENOSYS;
}
return 0;
}
EXPORT_SYMBOL_GPL(iscsi_set_param);
int iscsi_session_get_param(struct iscsi_cls_session *cls_session,
enum iscsi_param param, char *buf)
{
struct iscsi_session *session = cls_session->dd_data;
int len;
switch(param) {
case ISCSI_PARAM_FAST_ABORT:
len = sysfs_emit(buf, "%d\n", session->fast_abort);
break;
case ISCSI_PARAM_ABORT_TMO:
len = sysfs_emit(buf, "%d\n", session->abort_timeout);
break;
case ISCSI_PARAM_LU_RESET_TMO:
len = sysfs_emit(buf, "%d\n", session->lu_reset_timeout);
break;
case ISCSI_PARAM_TGT_RESET_TMO:
len = sysfs_emit(buf, "%d\n", session->tgt_reset_timeout);
break;
case ISCSI_PARAM_INITIAL_R2T_EN:
len = sysfs_emit(buf, "%d\n", session->initial_r2t_en);
break;
case ISCSI_PARAM_MAX_R2T:
len = sysfs_emit(buf, "%hu\n", session->max_r2t);
break;
case ISCSI_PARAM_IMM_DATA_EN:
len = sysfs_emit(buf, "%d\n", session->imm_data_en);
break;
case ISCSI_PARAM_FIRST_BURST:
len = sysfs_emit(buf, "%u\n", session->first_burst);
break;
case ISCSI_PARAM_MAX_BURST:
len = sysfs_emit(buf, "%u\n", session->max_burst);
break;
case ISCSI_PARAM_PDU_INORDER_EN:
len = sysfs_emit(buf, "%d\n", session->pdu_inorder_en);
break;
case ISCSI_PARAM_DATASEQ_INORDER_EN:
len = sysfs_emit(buf, "%d\n", session->dataseq_inorder_en);
break;
case ISCSI_PARAM_DEF_TASKMGMT_TMO:
len = sysfs_emit(buf, "%d\n", session->def_taskmgmt_tmo);
break;
case ISCSI_PARAM_ERL:
len = sysfs_emit(buf, "%d\n", session->erl);
break;
case ISCSI_PARAM_TARGET_NAME:
len = sysfs_emit(buf, "%s\n", session->targetname);
break;
case ISCSI_PARAM_TARGET_ALIAS:
len = sysfs_emit(buf, "%s\n", session->targetalias);
break;
case ISCSI_PARAM_TPGT:
len = sysfs_emit(buf, "%d\n", session->tpgt);
break;
case ISCSI_PARAM_USERNAME:
len = sysfs_emit(buf, "%s\n", session->username);
break;
case ISCSI_PARAM_USERNAME_IN:
len = sysfs_emit(buf, "%s\n", session->username_in);
break;
case ISCSI_PARAM_PASSWORD:
len = sysfs_emit(buf, "%s\n", session->password);
break;
case ISCSI_PARAM_PASSWORD_IN:
len = sysfs_emit(buf, "%s\n", session->password_in);
break;
case ISCSI_PARAM_IFACE_NAME:
len = sysfs_emit(buf, "%s\n", session->ifacename);
break;
case ISCSI_PARAM_INITIATOR_NAME:
len = sysfs_emit(buf, "%s\n", session->initiatorname);
break;
case ISCSI_PARAM_BOOT_ROOT:
len = sysfs_emit(buf, "%s\n", session->boot_root);
break;
case ISCSI_PARAM_BOOT_NIC:
len = sysfs_emit(buf, "%s\n", session->boot_nic);
break;
case ISCSI_PARAM_BOOT_TARGET:
len = sysfs_emit(buf, "%s\n", session->boot_target);
break;
case ISCSI_PARAM_AUTO_SND_TGT_DISABLE:
len = sysfs_emit(buf, "%u\n", session->auto_snd_tgt_disable);
break;
case ISCSI_PARAM_DISCOVERY_SESS:
len = sysfs_emit(buf, "%u\n", session->discovery_sess);
break;
case ISCSI_PARAM_PORTAL_TYPE:
len = sysfs_emit(buf, "%s\n", session->portal_type);
break;
case ISCSI_PARAM_CHAP_AUTH_EN:
len = sysfs_emit(buf, "%u\n", session->chap_auth_en);
break;
case ISCSI_PARAM_DISCOVERY_LOGOUT_EN:
len = sysfs_emit(buf, "%u\n", session->discovery_logout_en);
break;
case ISCSI_PARAM_BIDI_CHAP_EN:
len = sysfs_emit(buf, "%u\n", session->bidi_chap_en);
break;
case ISCSI_PARAM_DISCOVERY_AUTH_OPTIONAL:
len = sysfs_emit(buf, "%u\n", session->discovery_auth_optional);
break;
case ISCSI_PARAM_DEF_TIME2WAIT:
len = sysfs_emit(buf, "%d\n", session->time2wait);
break;
case ISCSI_PARAM_DEF_TIME2RETAIN:
len = sysfs_emit(buf, "%d\n", session->time2retain);
break;
case ISCSI_PARAM_TSID:
len = sysfs_emit(buf, "%u\n", session->tsid);
break;
case ISCSI_PARAM_ISID:
len = sysfs_emit(buf, "%02x%02x%02x%02x%02x%02x\n",
session->isid[0], session->isid[1],
session->isid[2], session->isid[3],
session->isid[4], session->isid[5]);
break;
case ISCSI_PARAM_DISCOVERY_PARENT_IDX:
len = sysfs_emit(buf, "%u\n", session->discovery_parent_idx);
break;
case ISCSI_PARAM_DISCOVERY_PARENT_TYPE:
if (session->discovery_parent_type)
len = sysfs_emit(buf, "%s\n",
session->discovery_parent_type);
else
len = sysfs_emit(buf, "\n");
break;
default:
return -ENOSYS;
}
return len;
}
EXPORT_SYMBOL_GPL(iscsi_session_get_param);
int iscsi_conn_get_addr_param(struct sockaddr_storage *addr,
enum iscsi_param param, char *buf)
{
struct sockaddr_in6 *sin6 = NULL;
struct sockaddr_in *sin = NULL;
int len;
switch (addr->ss_family) {
case AF_INET:
sin = (struct sockaddr_in *)addr;
break;
case AF_INET6:
sin6 = (struct sockaddr_in6 *)addr;
break;
default:
return -EINVAL;
}
switch (param) {
case ISCSI_PARAM_CONN_ADDRESS:
case ISCSI_HOST_PARAM_IPADDRESS:
if (sin)
len = sysfs_emit(buf, "%pI4\n", &sin->sin_addr.s_addr);
else
len = sysfs_emit(buf, "%pI6\n", &sin6->sin6_addr);
break;
case ISCSI_PARAM_CONN_PORT:
case ISCSI_PARAM_LOCAL_PORT:
if (sin)
len = sysfs_emit(buf, "%hu\n", be16_to_cpu(sin->sin_port));
else
len = sysfs_emit(buf, "%hu\n",
be16_to_cpu(sin6->sin6_port));
break;
default:
return -EINVAL;
}
return len;
}
EXPORT_SYMBOL_GPL(iscsi_conn_get_addr_param);
int iscsi_conn_get_param(struct iscsi_cls_conn *cls_conn,
enum iscsi_param param, char *buf)
{
struct iscsi_conn *conn = cls_conn->dd_data;
int len;
switch(param) {
case ISCSI_PARAM_PING_TMO:
len = sysfs_emit(buf, "%u\n", conn->ping_timeout);
break;
case ISCSI_PARAM_RECV_TMO:
len = sysfs_emit(buf, "%u\n", conn->recv_timeout);
break;
case ISCSI_PARAM_MAX_RECV_DLENGTH:
len = sysfs_emit(buf, "%u\n", conn->max_recv_dlength);
break;
case ISCSI_PARAM_MAX_XMIT_DLENGTH:
len = sysfs_emit(buf, "%u\n", conn->max_xmit_dlength);
break;
case ISCSI_PARAM_HDRDGST_EN:
len = sysfs_emit(buf, "%d\n", conn->hdrdgst_en);
break;
case ISCSI_PARAM_DATADGST_EN:
len = sysfs_emit(buf, "%d\n", conn->datadgst_en);
break;
case ISCSI_PARAM_IFMARKER_EN:
len = sysfs_emit(buf, "%d\n", conn->ifmarker_en);
break;
case ISCSI_PARAM_OFMARKER_EN:
len = sysfs_emit(buf, "%d\n", conn->ofmarker_en);
break;
case ISCSI_PARAM_EXP_STATSN:
len = sysfs_emit(buf, "%u\n", conn->exp_statsn);
break;
case ISCSI_PARAM_PERSISTENT_PORT:
len = sysfs_emit(buf, "%d\n", conn->persistent_port);
break;
case ISCSI_PARAM_PERSISTENT_ADDRESS:
len = sysfs_emit(buf, "%s\n", conn->persistent_address);
break;
case ISCSI_PARAM_STATSN:
len = sysfs_emit(buf, "%u\n", conn->statsn);
break;
case ISCSI_PARAM_MAX_SEGMENT_SIZE:
len = sysfs_emit(buf, "%u\n", conn->max_segment_size);
break;
case ISCSI_PARAM_KEEPALIVE_TMO:
len = sysfs_emit(buf, "%u\n", conn->keepalive_tmo);
break;
case ISCSI_PARAM_LOCAL_PORT:
len = sysfs_emit(buf, "%u\n", conn->local_port);
break;
case ISCSI_PARAM_TCP_TIMESTAMP_STAT:
len = sysfs_emit(buf, "%u\n", conn->tcp_timestamp_stat);
break;
case ISCSI_PARAM_TCP_NAGLE_DISABLE:
len = sysfs_emit(buf, "%u\n", conn->tcp_nagle_disable);
break;
case ISCSI_PARAM_TCP_WSF_DISABLE:
len = sysfs_emit(buf, "%u\n", conn->tcp_wsf_disable);
break;
case ISCSI_PARAM_TCP_TIMER_SCALE:
len = sysfs_emit(buf, "%u\n", conn->tcp_timer_scale);
break;
case ISCSI_PARAM_TCP_TIMESTAMP_EN:
len = sysfs_emit(buf, "%u\n", conn->tcp_timestamp_en);
break;
case ISCSI_PARAM_IP_FRAGMENT_DISABLE:
len = sysfs_emit(buf, "%u\n", conn->fragment_disable);
break;
case ISCSI_PARAM_IPV4_TOS:
len = sysfs_emit(buf, "%u\n", conn->ipv4_tos);
break;
case ISCSI_PARAM_IPV6_TC:
len = sysfs_emit(buf, "%u\n", conn->ipv6_traffic_class);
break;
case ISCSI_PARAM_IPV6_FLOW_LABEL:
len = sysfs_emit(buf, "%u\n", conn->ipv6_flow_label);
break;
case ISCSI_PARAM_IS_FW_ASSIGNED_IPV6:
len = sysfs_emit(buf, "%u\n", conn->is_fw_assigned_ipv6);
break;
case ISCSI_PARAM_TCP_XMIT_WSF:
len = sysfs_emit(buf, "%u\n", conn->tcp_xmit_wsf);
break;
case ISCSI_PARAM_TCP_RECV_WSF:
len = sysfs_emit(buf, "%u\n", conn->tcp_recv_wsf);
break;
case ISCSI_PARAM_LOCAL_IPADDR:
len = sysfs_emit(buf, "%s\n", conn->local_ipaddr);
break;
default:
return -ENOSYS;
}
return len;
}
EXPORT_SYMBOL_GPL(iscsi_conn_get_param);
int iscsi_host_get_param(struct Scsi_Host *shost, enum iscsi_host_param param,
char *buf)
{
struct iscsi_host *ihost = shost_priv(shost);
int len;
switch (param) {
case ISCSI_HOST_PARAM_NETDEV_NAME:
len = sysfs_emit(buf, "%s\n", ihost->netdev);
break;
case ISCSI_HOST_PARAM_HWADDRESS:
len = sysfs_emit(buf, "%s\n", ihost->hwaddress);
break;
case ISCSI_HOST_PARAM_INITIATOR_NAME:
len = sysfs_emit(buf, "%s\n", ihost->initiatorname);
break;
default:
return -ENOSYS;
}
return len;
}
EXPORT_SYMBOL_GPL(iscsi_host_get_param);
int iscsi_host_set_param(struct Scsi_Host *shost, enum iscsi_host_param param,
char *buf, int buflen)
{
struct iscsi_host *ihost = shost_priv(shost);
switch (param) {
case ISCSI_HOST_PARAM_NETDEV_NAME:
return iscsi_switch_str_param(&ihost->netdev, buf);
case ISCSI_HOST_PARAM_HWADDRESS:
return iscsi_switch_str_param(&ihost->hwaddress, buf);
case ISCSI_HOST_PARAM_INITIATOR_NAME:
return iscsi_switch_str_param(&ihost->initiatorname, buf);
default:
return -ENOSYS;
}
return 0;
}
EXPORT_SYMBOL_GPL(iscsi_host_set_param);
MODULE_AUTHOR("Mike Christie");
MODULE_DESCRIPTION("iSCSI library functions");
MODULE_LICENSE("GPL");