OpenCloudOS-Kernel/fs/nfs/blocklayout/blocklayout.c

976 lines
25 KiB
C
Raw Normal View History

/*
* linux/fs/nfs/blocklayout/blocklayout.c
*
* Module for the NFSv4.1 pNFS block layout driver.
*
* Copyright (c) 2006 The Regents of the University of Michigan.
* All rights reserved.
*
* Andy Adamson <andros@citi.umich.edu>
* Fred Isaman <iisaman@umich.edu>
*
* permission is granted to use, copy, create derivative works and
* redistribute this software and such derivative works for any purpose,
* so long as the name of the university of michigan is not used in
* any advertising or publicity pertaining to the use or distribution
* of this software without specific, written prior authorization. if
* the above copyright notice or any other identification of the
* university of michigan is included in any copy of any portion of
* this software, then the disclaimer below must also be included.
*
* this software is provided as is, without representation from the
* university of michigan as to its fitness for any purpose, and without
* warranty by the university of michigan of any kind, either express
* or implied, including without limitation the implied warranties of
* merchantability and fitness for a particular purpose. the regents
* of the university of michigan shall not be liable for any damages,
* including special, indirect, incidental, or consequential damages,
* with respect to any claim arising out or in connection with the use
* of the software, even if it has been or is hereafter advised of the
* possibility of such damages.
*/
#include <linux/module.h>
#include <linux/init.h>
#include <linux/mount.h>
#include <linux/namei.h>
#include <linux/bio.h> /* struct bio */
#include <linux/prefetch.h>
#include <linux/pagevec.h>
#include "../pnfs.h"
#include "../nfs4session.h"
#include "../internal.h"
#include "blocklayout.h"
#define NFSDBG_FACILITY NFSDBG_PNFS_LD
MODULE_LICENSE("GPL");
MODULE_AUTHOR("Andy Adamson <andros@citi.umich.edu>");
MODULE_DESCRIPTION("The NFSv4.1 pNFS Block layout driver");
pnfs/blocklayout: rewrite extent tracking Currently the block layout driver tracks extents in three separate data structures: - the two list of pnfs_block_extent structures returned by the server - the list of sectors that were in invalid state but have been written to - a list of pnfs_block_short_extent structures for LAYOUTCOMMIT All of these share the property that they are not only highly inefficient data structures, but also that operations on them are even more inefficient than nessecary. In addition there are various implementation defects like: - using an int to track sectors, causing corruption for large offsets - incorrect normalization of page or block granularity ranges - insufficient error handling - incorrect synchronization as extents can be modified while they are in use This patch replace all three data with a single unified rbtree structure tracking all extents, as well as their in-memory state, although we still need to instance for read-only and read-write extent due to the arcane client side COW feature in the block layouts spec. To fix the problem of extent possibly being modified while in use we make sure to return a copy of the extent for use in the write path - the extent can only be invalidated by a layout recall or return which has to wait until the I/O operations finished due to refcounts on the layout segment. The new extent tree work similar to the schemes used by block based filesystems like XFS or ext4. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2014-09-10 23:23:34 +08:00
static bool is_hole(struct pnfs_block_extent *be)
{
pnfs/blocklayout: rewrite extent tracking Currently the block layout driver tracks extents in three separate data structures: - the two list of pnfs_block_extent structures returned by the server - the list of sectors that were in invalid state but have been written to - a list of pnfs_block_short_extent structures for LAYOUTCOMMIT All of these share the property that they are not only highly inefficient data structures, but also that operations on them are even more inefficient than nessecary. In addition there are various implementation defects like: - using an int to track sectors, causing corruption for large offsets - incorrect normalization of page or block granularity ranges - insufficient error handling - incorrect synchronization as extents can be modified while they are in use This patch replace all three data with a single unified rbtree structure tracking all extents, as well as their in-memory state, although we still need to instance for read-only and read-write extent due to the arcane client side COW feature in the block layouts spec. To fix the problem of extent possibly being modified while in use we make sure to return a copy of the extent for use in the write path - the extent can only be invalidated by a layout recall or return which has to wait until the I/O operations finished due to refcounts on the layout segment. The new extent tree work similar to the schemes used by block based filesystems like XFS or ext4. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2014-09-10 23:23:34 +08:00
switch (be->be_state) {
case PNFS_BLOCK_NONE_DATA:
return true;
case PNFS_BLOCK_INVALID_DATA:
return be->be_tag ? false : true;
default:
return false;
}
pnfsblock: bl_write_pagelist Note: When upper layer's read/write request cannot be fulfilled, the block layout driver shouldn't silently mark the page as error. It should do what can be done and leave the rest to the upper layer. To do so, we should set rdata/wdata->res.count properly. When upper layer re-send the read/write request to finish the rest part of the request, pgbase is the position where we should start at. [pnfsblock: bl_write_pagelist support functions] [pnfsblock: bl_write_pagelist adjust for missing PG_USE_PNFS] Signed-off-by: Fred Isaman <iisaman@citi.umich.edu> [pnfsblock: handle errors when read or write pagelist.] Signed-off-by: Zhang Jingwang <yyalone@gmail.com> [pnfs-block: use new write_pagelist api] Signed-off-by: Benny Halevy <bhalevy@panasas.com> Signed-off-by: Benny Halevy <bhalevy@tonian.com> Signed-off-by: Jim Rees <rees@umich.edu> [SQUASHME: pnfsblock: mds_offset is set in the generic layer] Signed-off-by: Boaz Harrosh <bharrosh@panasas.com> Signed-off-by: Benny Halevy <bhalevy@tonian.com> [pnfsblock: mark IO error with NFS_LAYOUT_{RW|RO}_FAILED] Signed-off-by: Peng Tao <peng_tao@emc.com> [pnfsblock: SQUASHME: adjust to API change] Signed-off-by: Fred Isaman <iisaman@citi.umich.edu> [pnfsblock: fixup blksize alignment in bl_setup_layoutcommit] Signed-off-by: Benny Halevy <bhalevy@panasas.com> Signed-off-by: Benny Halevy <bhalevy@tonian.com> [pnfsblock: bl_write_pagelist adjust for missing PG_USE_PNFS] Signed-off-by: Fred Isaman <iisaman@citi.umich.edu> [pnfsblock: handle errors when read or write pagelist.] Signed-off-by: Zhang Jingwang <yyalone@gmail.com> [pnfs-block: use new write_pagelist api] Signed-off-by: Benny Halevy <bhalevy@panasas.com> Signed-off-by: Benny Halevy <bhalevy@tonian.com> Signed-off-by: Jim Rees <rees@umich.edu> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2011-07-31 08:52:54 +08:00
}
/* The data we are handed might be spread across several bios. We need
* to track when the last one is finished.
*/
struct parallel_io {
struct kref refcnt;
pnfs/blocklayout: rewrite extent tracking Currently the block layout driver tracks extents in three separate data structures: - the two list of pnfs_block_extent structures returned by the server - the list of sectors that were in invalid state but have been written to - a list of pnfs_block_short_extent structures for LAYOUTCOMMIT All of these share the property that they are not only highly inefficient data structures, but also that operations on them are even more inefficient than nessecary. In addition there are various implementation defects like: - using an int to track sectors, causing corruption for large offsets - incorrect normalization of page or block granularity ranges - insufficient error handling - incorrect synchronization as extents can be modified while they are in use This patch replace all three data with a single unified rbtree structure tracking all extents, as well as their in-memory state, although we still need to instance for read-only and read-write extent due to the arcane client side COW feature in the block layouts spec. To fix the problem of extent possibly being modified while in use we make sure to return a copy of the extent for use in the write path - the extent can only be invalidated by a layout recall or return which has to wait until the I/O operations finished due to refcounts on the layout segment. The new extent tree work similar to the schemes used by block based filesystems like XFS or ext4. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2014-09-10 23:23:34 +08:00
void (*pnfs_callback) (void *data);
void *data;
};
static inline struct parallel_io *alloc_parallel(void *data)
{
struct parallel_io *rv;
rv = kmalloc(sizeof(*rv), GFP_NOFS);
if (rv) {
rv->data = data;
kref_init(&rv->refcnt);
}
return rv;
}
static inline void get_parallel(struct parallel_io *p)
{
kref_get(&p->refcnt);
}
static void destroy_parallel(struct kref *kref)
{
struct parallel_io *p = container_of(kref, struct parallel_io, refcnt);
dprintk("%s enter\n", __func__);
pnfs/blocklayout: rewrite extent tracking Currently the block layout driver tracks extents in three separate data structures: - the two list of pnfs_block_extent structures returned by the server - the list of sectors that were in invalid state but have been written to - a list of pnfs_block_short_extent structures for LAYOUTCOMMIT All of these share the property that they are not only highly inefficient data structures, but also that operations on them are even more inefficient than nessecary. In addition there are various implementation defects like: - using an int to track sectors, causing corruption for large offsets - incorrect normalization of page or block granularity ranges - insufficient error handling - incorrect synchronization as extents can be modified while they are in use This patch replace all three data with a single unified rbtree structure tracking all extents, as well as their in-memory state, although we still need to instance for read-only and read-write extent due to the arcane client side COW feature in the block layouts spec. To fix the problem of extent possibly being modified while in use we make sure to return a copy of the extent for use in the write path - the extent can only be invalidated by a layout recall or return which has to wait until the I/O operations finished due to refcounts on the layout segment. The new extent tree work similar to the schemes used by block based filesystems like XFS or ext4. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2014-09-10 23:23:34 +08:00
p->pnfs_callback(p->data);
kfree(p);
}
static inline void put_parallel(struct parallel_io *p)
{
kref_put(&p->refcnt, destroy_parallel);
}
static struct bio *
bl_submit_bio(struct bio *bio)
{
if (bio) {
get_parallel(bio->bi_private);
dprintk("%s submitting %s bio %u@%llu\n", __func__,
bio_op(bio) == READ ? "read" : "write",
bio->bi_iter.bi_size,
block: Abstract out bvec iterator Immutable biovecs are going to require an explicit iterator. To implement immutable bvecs, a later patch is going to add a bi_bvec_done member to this struct; for now, this patch effectively just renames things. Signed-off-by: Kent Overstreet <kmo@daterainc.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: "Ed L. Cashin" <ecashin@coraid.com> Cc: Nick Piggin <npiggin@kernel.dk> Cc: Lars Ellenberg <drbd-dev@lists.linbit.com> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Matthew Wilcox <willy@linux.intel.com> Cc: Geoff Levand <geoff@infradead.org> Cc: Yehuda Sadeh <yehuda@inktank.com> Cc: Sage Weil <sage@inktank.com> Cc: Alex Elder <elder@inktank.com> Cc: ceph-devel@vger.kernel.org Cc: Joshua Morris <josh.h.morris@us.ibm.com> Cc: Philip Kelleher <pjk1939@linux.vnet.ibm.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Jeremy Fitzhardinge <jeremy@goop.org> Cc: Neil Brown <neilb@suse.de> Cc: Alasdair Kergon <agk@redhat.com> Cc: Mike Snitzer <snitzer@redhat.com> Cc: dm-devel@redhat.com Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: linux390@de.ibm.com Cc: Boaz Harrosh <bharrosh@panasas.com> Cc: Benny Halevy <bhalevy@tonian.com> Cc: "James E.J. Bottomley" <JBottomley@parallels.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: "Nicholas A. Bellinger" <nab@linux-iscsi.org> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Chris Mason <chris.mason@fusionio.com> Cc: "Theodore Ts'o" <tytso@mit.edu> Cc: Andreas Dilger <adilger.kernel@dilger.ca> Cc: Jaegeuk Kim <jaegeuk.kim@samsung.com> Cc: Steven Whitehouse <swhiteho@redhat.com> Cc: Dave Kleikamp <shaggy@kernel.org> Cc: Joern Engel <joern@logfs.org> Cc: Prasad Joshi <prasadjoshi.linux@gmail.com> Cc: Trond Myklebust <Trond.Myklebust@netapp.com> Cc: KONISHI Ryusuke <konishi.ryusuke@lab.ntt.co.jp> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Ben Myers <bpm@sgi.com> Cc: xfs@oss.sgi.com Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Len Brown <len.brown@intel.com> Cc: Pavel Machek <pavel@ucw.cz> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Cc: Herton Ronaldo Krzesinski <herton.krzesinski@canonical.com> Cc: Ben Hutchings <ben@decadent.org.uk> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Guo Chao <yan@linux.vnet.ibm.com> Cc: Tejun Heo <tj@kernel.org> Cc: Asai Thambi S P <asamymuthupa@micron.com> Cc: Selvan Mani <smani@micron.com> Cc: Sam Bradshaw <sbradshaw@micron.com> Cc: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Cc: "Roger Pau Monné" <roger.pau@citrix.com> Cc: Jan Beulich <jbeulich@suse.com> Cc: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Cc: Ian Campbell <Ian.Campbell@citrix.com> Cc: Sebastian Ott <sebott@linux.vnet.ibm.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Jiang Liu <jiang.liu@huawei.com> Cc: Nitin Gupta <ngupta@vflare.org> Cc: Jerome Marchand <jmarchand@redhat.com> Cc: Joe Perches <joe@perches.com> Cc: Peng Tao <tao.peng@emc.com> Cc: Andy Adamson <andros@netapp.com> Cc: fanchaoting <fanchaoting@cn.fujitsu.com> Cc: Jie Liu <jeff.liu@oracle.com> Cc: Sunil Mushran <sunil.mushran@gmail.com> Cc: "Martin K. Petersen" <martin.petersen@oracle.com> Cc: Namjae Jeon <namjae.jeon@samsung.com> Cc: Pankaj Kumar <pankaj.km@samsung.com> Cc: Dan Magenheimer <dan.magenheimer@oracle.com> Cc: Mel Gorman <mgorman@suse.de>6
2013-10-12 06:44:27 +08:00
(unsigned long long)bio->bi_iter.bi_sector);
submit_bio(bio);
}
return NULL;
}
static struct bio *
bl_alloc_init_bio(int npg, struct block_device *bdev, sector_t disk_sector,
bio_end_io_t end_io, struct parallel_io *par)
{
struct bio *bio;
npg = min(npg, BIO_MAX_PAGES);
bio = bio_alloc(GFP_NOIO, npg);
if (!bio && (current->flags & PF_MEMALLOC)) {
while (!bio && (npg /= 2))
bio = bio_alloc(GFP_NOIO, npg);
}
if (bio) {
bio->bi_iter.bi_sector = disk_sector;
bio_set_dev(bio, bdev);
bio->bi_end_io = end_io;
bio->bi_private = par;
}
return bio;
}
static struct bio *
do_add_page_to_bio(struct bio *bio, int npg, int rw, sector_t isect,
struct page *page, struct pnfs_block_dev_map *map,
struct pnfs_block_extent *be, bio_end_io_t end_io,
struct parallel_io *par, unsigned int offset, int *len)
{
struct pnfs_block_dev *dev =
container_of(be->be_device, struct pnfs_block_dev, node);
u64 disk_addr, end;
dprintk("%s: npg %d rw %d isect %llu offset %u len %d\n", __func__,
npg, rw, (unsigned long long)isect, offset, *len);
/* translate to device offset */
isect += be->be_v_offset;
isect -= be->be_f_offset;
/* translate to physical disk offset */
disk_addr = (u64)isect << SECTOR_SHIFT;
if (disk_addr < map->start || disk_addr >= map->start + map->len) {
if (!dev->map(dev, disk_addr, map))
return ERR_PTR(-EIO);
bio = bl_submit_bio(bio);
}
disk_addr += map->disk_offset;
disk_addr -= map->start;
/* limit length to what the device mapping allows */
end = disk_addr + *len;
if (end >= map->start + map->len)
*len = map->start + map->len - disk_addr;
retry:
if (!bio) {
bio = bl_alloc_init_bio(npg, map->bdev,
disk_addr >> SECTOR_SHIFT, end_io, par);
if (!bio)
return ERR_PTR(-ENOMEM);
bio_set_op_attrs(bio, rw, 0);
}
if (bio_add_page(bio, page, *len, offset) < *len) {
bio = bl_submit_bio(bio);
goto retry;
}
return bio;
}
static void bl_end_io_read(struct bio *bio)
{
struct parallel_io *par = bio->bi_private;
if (bio->bi_status) {
struct nfs_pgio_header *header = par->data;
if (!header->pnfs_error)
header->pnfs_error = -EIO;
pnfs_set_lo_fail(header->lseg);
}
bio_put(bio);
put_parallel(par);
}
static void bl_read_cleanup(struct work_struct *work)
{
struct rpc_task *task;
struct nfs_pgio_header *hdr;
dprintk("%s enter\n", __func__);
task = container_of(work, struct rpc_task, u.tk_work);
hdr = container_of(task, struct nfs_pgio_header, task);
pnfs_ld_read_done(hdr);
}
static void
pnfs/blocklayout: rewrite extent tracking Currently the block layout driver tracks extents in three separate data structures: - the two list of pnfs_block_extent structures returned by the server - the list of sectors that were in invalid state but have been written to - a list of pnfs_block_short_extent structures for LAYOUTCOMMIT All of these share the property that they are not only highly inefficient data structures, but also that operations on them are even more inefficient than nessecary. In addition there are various implementation defects like: - using an int to track sectors, causing corruption for large offsets - incorrect normalization of page or block granularity ranges - insufficient error handling - incorrect synchronization as extents can be modified while they are in use This patch replace all three data with a single unified rbtree structure tracking all extents, as well as their in-memory state, although we still need to instance for read-only and read-write extent due to the arcane client side COW feature in the block layouts spec. To fix the problem of extent possibly being modified while in use we make sure to return a copy of the extent for use in the write path - the extent can only be invalidated by a layout recall or return which has to wait until the I/O operations finished due to refcounts on the layout segment. The new extent tree work similar to the schemes used by block based filesystems like XFS or ext4. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2014-09-10 23:23:34 +08:00
bl_end_par_io_read(void *data)
{
struct nfs_pgio_header *hdr = data;
hdr->task.tk_status = hdr->pnfs_error;
INIT_WORK(&hdr->task.u.tk_work, bl_read_cleanup);
schedule_work(&hdr->task.u.tk_work);
}
static enum pnfs_try_status
pnfs/blocklayout: rewrite extent tracking Currently the block layout driver tracks extents in three separate data structures: - the two list of pnfs_block_extent structures returned by the server - the list of sectors that were in invalid state but have been written to - a list of pnfs_block_short_extent structures for LAYOUTCOMMIT All of these share the property that they are not only highly inefficient data structures, but also that operations on them are even more inefficient than nessecary. In addition there are various implementation defects like: - using an int to track sectors, causing corruption for large offsets - incorrect normalization of page or block granularity ranges - insufficient error handling - incorrect synchronization as extents can be modified while they are in use This patch replace all three data with a single unified rbtree structure tracking all extents, as well as their in-memory state, although we still need to instance for read-only and read-write extent due to the arcane client side COW feature in the block layouts spec. To fix the problem of extent possibly being modified while in use we make sure to return a copy of the extent for use in the write path - the extent can only be invalidated by a layout recall or return which has to wait until the I/O operations finished due to refcounts on the layout segment. The new extent tree work similar to the schemes used by block based filesystems like XFS or ext4. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2014-09-10 23:23:34 +08:00
bl_read_pagelist(struct nfs_pgio_header *header)
{
pnfs/blocklayout: rewrite extent tracking Currently the block layout driver tracks extents in three separate data structures: - the two list of pnfs_block_extent structures returned by the server - the list of sectors that were in invalid state but have been written to - a list of pnfs_block_short_extent structures for LAYOUTCOMMIT All of these share the property that they are not only highly inefficient data structures, but also that operations on them are even more inefficient than nessecary. In addition there are various implementation defects like: - using an int to track sectors, causing corruption for large offsets - incorrect normalization of page or block granularity ranges - insufficient error handling - incorrect synchronization as extents can be modified while they are in use This patch replace all three data with a single unified rbtree structure tracking all extents, as well as their in-memory state, although we still need to instance for read-only and read-write extent due to the arcane client side COW feature in the block layouts spec. To fix the problem of extent possibly being modified while in use we make sure to return a copy of the extent for use in the write path - the extent can only be invalidated by a layout recall or return which has to wait until the I/O operations finished due to refcounts on the layout segment. The new extent tree work similar to the schemes used by block based filesystems like XFS or ext4. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2014-09-10 23:23:34 +08:00
struct pnfs_block_layout *bl = BLK_LSEG2EXT(header->lseg);
struct pnfs_block_dev_map map = { .start = NFS4_MAX_UINT64 };
struct bio *bio = NULL;
pnfs/blocklayout: rewrite extent tracking Currently the block layout driver tracks extents in three separate data structures: - the two list of pnfs_block_extent structures returned by the server - the list of sectors that were in invalid state but have been written to - a list of pnfs_block_short_extent structures for LAYOUTCOMMIT All of these share the property that they are not only highly inefficient data structures, but also that operations on them are even more inefficient than nessecary. In addition there are various implementation defects like: - using an int to track sectors, causing corruption for large offsets - incorrect normalization of page or block granularity ranges - insufficient error handling - incorrect synchronization as extents can be modified while they are in use This patch replace all three data with a single unified rbtree structure tracking all extents, as well as their in-memory state, although we still need to instance for read-only and read-write extent due to the arcane client side COW feature in the block layouts spec. To fix the problem of extent possibly being modified while in use we make sure to return a copy of the extent for use in the write path - the extent can only be invalidated by a layout recall or return which has to wait until the I/O operations finished due to refcounts on the layout segment. The new extent tree work similar to the schemes used by block based filesystems like XFS or ext4. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2014-09-10 23:23:34 +08:00
struct pnfs_block_extent be;
sector_t isect, extent_length = 0;
struct parallel_io *par;
pnfs/blocklayout: rewrite extent tracking Currently the block layout driver tracks extents in three separate data structures: - the two list of pnfs_block_extent structures returned by the server - the list of sectors that were in invalid state but have been written to - a list of pnfs_block_short_extent structures for LAYOUTCOMMIT All of these share the property that they are not only highly inefficient data structures, but also that operations on them are even more inefficient than nessecary. In addition there are various implementation defects like: - using an int to track sectors, causing corruption for large offsets - incorrect normalization of page or block granularity ranges - insufficient error handling - incorrect synchronization as extents can be modified while they are in use This patch replace all three data with a single unified rbtree structure tracking all extents, as well as their in-memory state, although we still need to instance for read-only and read-write extent due to the arcane client side COW feature in the block layouts spec. To fix the problem of extent possibly being modified while in use we make sure to return a copy of the extent for use in the write path - the extent can only be invalidated by a layout recall or return which has to wait until the I/O operations finished due to refcounts on the layout segment. The new extent tree work similar to the schemes used by block based filesystems like XFS or ext4. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2014-09-10 23:23:34 +08:00
loff_t f_offset = header->args.offset;
size_t bytes_left = header->args.count;
unsigned int pg_offset = header->args.pgbase, pg_len;
pnfs/blocklayout: rewrite extent tracking Currently the block layout driver tracks extents in three separate data structures: - the two list of pnfs_block_extent structures returned by the server - the list of sectors that were in invalid state but have been written to - a list of pnfs_block_short_extent structures for LAYOUTCOMMIT All of these share the property that they are not only highly inefficient data structures, but also that operations on them are even more inefficient than nessecary. In addition there are various implementation defects like: - using an int to track sectors, causing corruption for large offsets - incorrect normalization of page or block granularity ranges - insufficient error handling - incorrect synchronization as extents can be modified while they are in use This patch replace all three data with a single unified rbtree structure tracking all extents, as well as their in-memory state, although we still need to instance for read-only and read-write extent due to the arcane client side COW feature in the block layouts spec. To fix the problem of extent possibly being modified while in use we make sure to return a copy of the extent for use in the write path - the extent can only be invalidated by a layout recall or return which has to wait until the I/O operations finished due to refcounts on the layout segment. The new extent tree work similar to the schemes used by block based filesystems like XFS or ext4. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2014-09-10 23:23:34 +08:00
struct page **pages = header->args.pages;
mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macros PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time ago with promise that one day it will be possible to implement page cache with bigger chunks than PAGE_SIZE. This promise never materialized. And unlikely will. We have many places where PAGE_CACHE_SIZE assumed to be equal to PAGE_SIZE. And it's constant source of confusion on whether PAGE_CACHE_* or PAGE_* constant should be used in a particular case, especially on the border between fs and mm. Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much breakage to be doable. Let's stop pretending that pages in page cache are special. They are not. The changes are pretty straight-forward: - <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN}; - page_cache_get() -> get_page(); - page_cache_release() -> put_page(); This patch contains automated changes generated with coccinelle using script below. For some reason, coccinelle doesn't patch header files. I've called spatch for them manually. The only adjustment after coccinelle is revert of changes to PAGE_CAHCE_ALIGN definition: we are going to drop it later. There are few places in the code where coccinelle didn't reach. I'll fix them manually in a separate patch. Comments and documentation also will be addressed with the separate patch. virtual patch @@ expression E; @@ - E << (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ expression E; @@ - E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ @@ - PAGE_CACHE_SHIFT + PAGE_SHIFT @@ @@ - PAGE_CACHE_SIZE + PAGE_SIZE @@ @@ - PAGE_CACHE_MASK + PAGE_MASK @@ expression E; @@ - PAGE_CACHE_ALIGN(E) + PAGE_ALIGN(E) @@ expression E; @@ - page_cache_get(E) + get_page(E) @@ expression E; @@ - page_cache_release(E) + put_page(E) Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-01 20:29:47 +08:00
int pg_index = header->args.pgbase >> PAGE_SHIFT;
const bool is_dio = (header->dreq != NULL);
struct blk_plug plug;
pnfs/blocklayout: rewrite extent tracking Currently the block layout driver tracks extents in three separate data structures: - the two list of pnfs_block_extent structures returned by the server - the list of sectors that were in invalid state but have been written to - a list of pnfs_block_short_extent structures for LAYOUTCOMMIT All of these share the property that they are not only highly inefficient data structures, but also that operations on them are even more inefficient than nessecary. In addition there are various implementation defects like: - using an int to track sectors, causing corruption for large offsets - incorrect normalization of page or block granularity ranges - insufficient error handling - incorrect synchronization as extents can be modified while they are in use This patch replace all three data with a single unified rbtree structure tracking all extents, as well as their in-memory state, although we still need to instance for read-only and read-write extent due to the arcane client side COW feature in the block layouts spec. To fix the problem of extent possibly being modified while in use we make sure to return a copy of the extent for use in the write path - the extent can only be invalidated by a layout recall or return which has to wait until the I/O operations finished due to refcounts on the layout segment. The new extent tree work similar to the schemes used by block based filesystems like XFS or ext4. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2014-09-10 23:23:34 +08:00
int i;
dprintk("%s enter nr_pages %u offset %lld count %u\n", __func__,
pnfs/blocklayout: rewrite extent tracking Currently the block layout driver tracks extents in three separate data structures: - the two list of pnfs_block_extent structures returned by the server - the list of sectors that were in invalid state but have been written to - a list of pnfs_block_short_extent structures for LAYOUTCOMMIT All of these share the property that they are not only highly inefficient data structures, but also that operations on them are even more inefficient than nessecary. In addition there are various implementation defects like: - using an int to track sectors, causing corruption for large offsets - incorrect normalization of page or block granularity ranges - insufficient error handling - incorrect synchronization as extents can be modified while they are in use This patch replace all three data with a single unified rbtree structure tracking all extents, as well as their in-memory state, although we still need to instance for read-only and read-write extent due to the arcane client side COW feature in the block layouts spec. To fix the problem of extent possibly being modified while in use we make sure to return a copy of the extent for use in the write path - the extent can only be invalidated by a layout recall or return which has to wait until the I/O operations finished due to refcounts on the layout segment. The new extent tree work similar to the schemes used by block based filesystems like XFS or ext4. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2014-09-10 23:23:34 +08:00
header->page_array.npages, f_offset,
(unsigned int)header->args.count);
pnfs/blocklayout: rewrite extent tracking Currently the block layout driver tracks extents in three separate data structures: - the two list of pnfs_block_extent structures returned by the server - the list of sectors that were in invalid state but have been written to - a list of pnfs_block_short_extent structures for LAYOUTCOMMIT All of these share the property that they are not only highly inefficient data structures, but also that operations on them are even more inefficient than nessecary. In addition there are various implementation defects like: - using an int to track sectors, causing corruption for large offsets - incorrect normalization of page or block granularity ranges - insufficient error handling - incorrect synchronization as extents can be modified while they are in use This patch replace all three data with a single unified rbtree structure tracking all extents, as well as their in-memory state, although we still need to instance for read-only and read-write extent due to the arcane client side COW feature in the block layouts spec. To fix the problem of extent possibly being modified while in use we make sure to return a copy of the extent for use in the write path - the extent can only be invalidated by a layout recall or return which has to wait until the I/O operations finished due to refcounts on the layout segment. The new extent tree work similar to the schemes used by block based filesystems like XFS or ext4. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2014-09-10 23:23:34 +08:00
par = alloc_parallel(header);
if (!par)
pnfs/blocklayout: rewrite extent tracking Currently the block layout driver tracks extents in three separate data structures: - the two list of pnfs_block_extent structures returned by the server - the list of sectors that were in invalid state but have been written to - a list of pnfs_block_short_extent structures for LAYOUTCOMMIT All of these share the property that they are not only highly inefficient data structures, but also that operations on them are even more inefficient than nessecary. In addition there are various implementation defects like: - using an int to track sectors, causing corruption for large offsets - incorrect normalization of page or block granularity ranges - insufficient error handling - incorrect synchronization as extents can be modified while they are in use This patch replace all three data with a single unified rbtree structure tracking all extents, as well as their in-memory state, although we still need to instance for read-only and read-write extent due to the arcane client side COW feature in the block layouts spec. To fix the problem of extent possibly being modified while in use we make sure to return a copy of the extent for use in the write path - the extent can only be invalidated by a layout recall or return which has to wait until the I/O operations finished due to refcounts on the layout segment. The new extent tree work similar to the schemes used by block based filesystems like XFS or ext4. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2014-09-10 23:23:34 +08:00
return PNFS_NOT_ATTEMPTED;
par->pnfs_callback = bl_end_par_io_read;
blk_start_plug(&plug);
isect = (sector_t) (f_offset >> SECTOR_SHIFT);
/* Code assumes extents are page-aligned */
pnfs/blocklayout: rewrite extent tracking Currently the block layout driver tracks extents in three separate data structures: - the two list of pnfs_block_extent structures returned by the server - the list of sectors that were in invalid state but have been written to - a list of pnfs_block_short_extent structures for LAYOUTCOMMIT All of these share the property that they are not only highly inefficient data structures, but also that operations on them are even more inefficient than nessecary. In addition there are various implementation defects like: - using an int to track sectors, causing corruption for large offsets - incorrect normalization of page or block granularity ranges - insufficient error handling - incorrect synchronization as extents can be modified while they are in use This patch replace all three data with a single unified rbtree structure tracking all extents, as well as their in-memory state, although we still need to instance for read-only and read-write extent due to the arcane client side COW feature in the block layouts spec. To fix the problem of extent possibly being modified while in use we make sure to return a copy of the extent for use in the write path - the extent can only be invalidated by a layout recall or return which has to wait until the I/O operations finished due to refcounts on the layout segment. The new extent tree work similar to the schemes used by block based filesystems like XFS or ext4. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2014-09-10 23:23:34 +08:00
for (i = pg_index; i < header->page_array.npages; i++) {
if (extent_length <= 0) {
/* We've used up the previous extent */
bio = bl_submit_bio(bio);
pnfs/blocklayout: rewrite extent tracking Currently the block layout driver tracks extents in three separate data structures: - the two list of pnfs_block_extent structures returned by the server - the list of sectors that were in invalid state but have been written to - a list of pnfs_block_short_extent structures for LAYOUTCOMMIT All of these share the property that they are not only highly inefficient data structures, but also that operations on them are even more inefficient than nessecary. In addition there are various implementation defects like: - using an int to track sectors, causing corruption for large offsets - incorrect normalization of page or block granularity ranges - insufficient error handling - incorrect synchronization as extents can be modified while they are in use This patch replace all three data with a single unified rbtree structure tracking all extents, as well as their in-memory state, although we still need to instance for read-only and read-write extent due to the arcane client side COW feature in the block layouts spec. To fix the problem of extent possibly being modified while in use we make sure to return a copy of the extent for use in the write path - the extent can only be invalidated by a layout recall or return which has to wait until the I/O operations finished due to refcounts on the layout segment. The new extent tree work similar to the schemes used by block based filesystems like XFS or ext4. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2014-09-10 23:23:34 +08:00
/* Get the next one */
pnfs/blocklayout: rewrite extent tracking Currently the block layout driver tracks extents in three separate data structures: - the two list of pnfs_block_extent structures returned by the server - the list of sectors that were in invalid state but have been written to - a list of pnfs_block_short_extent structures for LAYOUTCOMMIT All of these share the property that they are not only highly inefficient data structures, but also that operations on them are even more inefficient than nessecary. In addition there are various implementation defects like: - using an int to track sectors, causing corruption for large offsets - incorrect normalization of page or block granularity ranges - insufficient error handling - incorrect synchronization as extents can be modified while they are in use This patch replace all three data with a single unified rbtree structure tracking all extents, as well as their in-memory state, although we still need to instance for read-only and read-write extent due to the arcane client side COW feature in the block layouts spec. To fix the problem of extent possibly being modified while in use we make sure to return a copy of the extent for use in the write path - the extent can only be invalidated by a layout recall or return which has to wait until the I/O operations finished due to refcounts on the layout segment. The new extent tree work similar to the schemes used by block based filesystems like XFS or ext4. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2014-09-10 23:23:34 +08:00
if (!ext_tree_lookup(bl, isect, &be, false)) {
header->pnfs_error = -EIO;
goto out;
}
pnfs/blocklayout: rewrite extent tracking Currently the block layout driver tracks extents in three separate data structures: - the two list of pnfs_block_extent structures returned by the server - the list of sectors that were in invalid state but have been written to - a list of pnfs_block_short_extent structures for LAYOUTCOMMIT All of these share the property that they are not only highly inefficient data structures, but also that operations on them are even more inefficient than nessecary. In addition there are various implementation defects like: - using an int to track sectors, causing corruption for large offsets - incorrect normalization of page or block granularity ranges - insufficient error handling - incorrect synchronization as extents can be modified while they are in use This patch replace all three data with a single unified rbtree structure tracking all extents, as well as their in-memory state, although we still need to instance for read-only and read-write extent due to the arcane client side COW feature in the block layouts spec. To fix the problem of extent possibly being modified while in use we make sure to return a copy of the extent for use in the write path - the extent can only be invalidated by a layout recall or return which has to wait until the I/O operations finished due to refcounts on the layout segment. The new extent tree work similar to the schemes used by block based filesystems like XFS or ext4. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2014-09-10 23:23:34 +08:00
extent_length = be.be_length - (isect - be.be_f_offset);
}
if (is_dio) {
mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macros PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time ago with promise that one day it will be possible to implement page cache with bigger chunks than PAGE_SIZE. This promise never materialized. And unlikely will. We have many places where PAGE_CACHE_SIZE assumed to be equal to PAGE_SIZE. And it's constant source of confusion on whether PAGE_CACHE_* or PAGE_* constant should be used in a particular case, especially on the border between fs and mm. Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much breakage to be doable. Let's stop pretending that pages in page cache are special. They are not. The changes are pretty straight-forward: - <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN}; - page_cache_get() -> get_page(); - page_cache_release() -> put_page(); This patch contains automated changes generated with coccinelle using script below. For some reason, coccinelle doesn't patch header files. I've called spatch for them manually. The only adjustment after coccinelle is revert of changes to PAGE_CAHCE_ALIGN definition: we are going to drop it later. There are few places in the code where coccinelle didn't reach. I'll fix them manually in a separate patch. Comments and documentation also will be addressed with the separate patch. virtual patch @@ expression E; @@ - E << (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ expression E; @@ - E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ @@ - PAGE_CACHE_SHIFT + PAGE_SHIFT @@ @@ - PAGE_CACHE_SIZE + PAGE_SIZE @@ @@ - PAGE_CACHE_MASK + PAGE_MASK @@ expression E; @@ - PAGE_CACHE_ALIGN(E) + PAGE_ALIGN(E) @@ expression E; @@ - page_cache_get(E) + get_page(E) @@ expression E; @@ - page_cache_release(E) + put_page(E) Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-01 20:29:47 +08:00
if (pg_offset + bytes_left > PAGE_SIZE)
pg_len = PAGE_SIZE - pg_offset;
else
pg_len = bytes_left;
} else {
BUG_ON(pg_offset != 0);
mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macros PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time ago with promise that one day it will be possible to implement page cache with bigger chunks than PAGE_SIZE. This promise never materialized. And unlikely will. We have many places where PAGE_CACHE_SIZE assumed to be equal to PAGE_SIZE. And it's constant source of confusion on whether PAGE_CACHE_* or PAGE_* constant should be used in a particular case, especially on the border between fs and mm. Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much breakage to be doable. Let's stop pretending that pages in page cache are special. They are not. The changes are pretty straight-forward: - <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN}; - page_cache_get() -> get_page(); - page_cache_release() -> put_page(); This patch contains automated changes generated with coccinelle using script below. For some reason, coccinelle doesn't patch header files. I've called spatch for them manually. The only adjustment after coccinelle is revert of changes to PAGE_CAHCE_ALIGN definition: we are going to drop it later. There are few places in the code where coccinelle didn't reach. I'll fix them manually in a separate patch. Comments and documentation also will be addressed with the separate patch. virtual patch @@ expression E; @@ - E << (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ expression E; @@ - E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ @@ - PAGE_CACHE_SHIFT + PAGE_SHIFT @@ @@ - PAGE_CACHE_SIZE + PAGE_SIZE @@ @@ - PAGE_CACHE_MASK + PAGE_MASK @@ expression E; @@ - PAGE_CACHE_ALIGN(E) + PAGE_ALIGN(E) @@ expression E; @@ - page_cache_get(E) + get_page(E) @@ expression E; @@ - page_cache_release(E) + put_page(E) Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-01 20:29:47 +08:00
pg_len = PAGE_SIZE;
}
pnfs/blocklayout: rewrite extent tracking Currently the block layout driver tracks extents in three separate data structures: - the two list of pnfs_block_extent structures returned by the server - the list of sectors that were in invalid state but have been written to - a list of pnfs_block_short_extent structures for LAYOUTCOMMIT All of these share the property that they are not only highly inefficient data structures, but also that operations on them are even more inefficient than nessecary. In addition there are various implementation defects like: - using an int to track sectors, causing corruption for large offsets - incorrect normalization of page or block granularity ranges - insufficient error handling - incorrect synchronization as extents can be modified while they are in use This patch replace all three data with a single unified rbtree structure tracking all extents, as well as their in-memory state, although we still need to instance for read-only and read-write extent due to the arcane client side COW feature in the block layouts spec. To fix the problem of extent possibly being modified while in use we make sure to return a copy of the extent for use in the write path - the extent can only be invalidated by a layout recall or return which has to wait until the I/O operations finished due to refcounts on the layout segment. The new extent tree work similar to the schemes used by block based filesystems like XFS or ext4. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2014-09-10 23:23:34 +08:00
if (is_hole(&be)) {
bio = bl_submit_bio(bio);
/* Fill hole w/ zeroes w/o accessing device */
dprintk("%s Zeroing page for hole\n", __func__);
zero_user_segment(pages[i], pg_offset, pg_len);
/* invalidate map */
map.start = NFS4_MAX_UINT64;
} else {
bio = do_add_page_to_bio(bio,
pnfs/blocklayout: rewrite extent tracking Currently the block layout driver tracks extents in three separate data structures: - the two list of pnfs_block_extent structures returned by the server - the list of sectors that were in invalid state but have been written to - a list of pnfs_block_short_extent structures for LAYOUTCOMMIT All of these share the property that they are not only highly inefficient data structures, but also that operations on them are even more inefficient than nessecary. In addition there are various implementation defects like: - using an int to track sectors, causing corruption for large offsets - incorrect normalization of page or block granularity ranges - insufficient error handling - incorrect synchronization as extents can be modified while they are in use This patch replace all three data with a single unified rbtree structure tracking all extents, as well as their in-memory state, although we still need to instance for read-only and read-write extent due to the arcane client side COW feature in the block layouts spec. To fix the problem of extent possibly being modified while in use we make sure to return a copy of the extent for use in the write path - the extent can only be invalidated by a layout recall or return which has to wait until the I/O operations finished due to refcounts on the layout segment. The new extent tree work similar to the schemes used by block based filesystems like XFS or ext4. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2014-09-10 23:23:34 +08:00
header->page_array.npages - i,
READ,
isect, pages[i], &map, &be,
bl_end_io_read, par,
pg_offset, &pg_len);
if (IS_ERR(bio)) {
header->pnfs_error = PTR_ERR(bio);
bio = NULL;
goto out;
}
}
isect += (pg_len >> SECTOR_SHIFT);
extent_length -= (pg_len >> SECTOR_SHIFT);
f_offset += pg_len;
bytes_left -= pg_len;
pg_offset = 0;
}
if ((isect << SECTOR_SHIFT) >= header->inode->i_size) {
pnfs/blocklayout: rewrite extent tracking Currently the block layout driver tracks extents in three separate data structures: - the two list of pnfs_block_extent structures returned by the server - the list of sectors that were in invalid state but have been written to - a list of pnfs_block_short_extent structures for LAYOUTCOMMIT All of these share the property that they are not only highly inefficient data structures, but also that operations on them are even more inefficient than nessecary. In addition there are various implementation defects like: - using an int to track sectors, causing corruption for large offsets - incorrect normalization of page or block granularity ranges - insufficient error handling - incorrect synchronization as extents can be modified while they are in use This patch replace all three data with a single unified rbtree structure tracking all extents, as well as their in-memory state, although we still need to instance for read-only and read-write extent due to the arcane client side COW feature in the block layouts spec. To fix the problem of extent possibly being modified while in use we make sure to return a copy of the extent for use in the write path - the extent can only be invalidated by a layout recall or return which has to wait until the I/O operations finished due to refcounts on the layout segment. The new extent tree work similar to the schemes used by block based filesystems like XFS or ext4. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2014-09-10 23:23:34 +08:00
header->res.eof = 1;
header->res.count = header->inode->i_size - header->args.offset;
} else {
pnfs/blocklayout: rewrite extent tracking Currently the block layout driver tracks extents in three separate data structures: - the two list of pnfs_block_extent structures returned by the server - the list of sectors that were in invalid state but have been written to - a list of pnfs_block_short_extent structures for LAYOUTCOMMIT All of these share the property that they are not only highly inefficient data structures, but also that operations on them are even more inefficient than nessecary. In addition there are various implementation defects like: - using an int to track sectors, causing corruption for large offsets - incorrect normalization of page or block granularity ranges - insufficient error handling - incorrect synchronization as extents can be modified while they are in use This patch replace all three data with a single unified rbtree structure tracking all extents, as well as their in-memory state, although we still need to instance for read-only and read-write extent due to the arcane client side COW feature in the block layouts spec. To fix the problem of extent possibly being modified while in use we make sure to return a copy of the extent for use in the write path - the extent can only be invalidated by a layout recall or return which has to wait until the I/O operations finished due to refcounts on the layout segment. The new extent tree work similar to the schemes used by block based filesystems like XFS or ext4. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2014-09-10 23:23:34 +08:00
header->res.count = (isect << SECTOR_SHIFT) - header->args.offset;
}
out:
bl_submit_bio(bio);
blk_finish_plug(&plug);
put_parallel(par);
return PNFS_ATTEMPTED;
}
static void bl_end_io_write(struct bio *bio)
pnfsblock: bl_write_pagelist Note: When upper layer's read/write request cannot be fulfilled, the block layout driver shouldn't silently mark the page as error. It should do what can be done and leave the rest to the upper layer. To do so, we should set rdata/wdata->res.count properly. When upper layer re-send the read/write request to finish the rest part of the request, pgbase is the position where we should start at. [pnfsblock: bl_write_pagelist support functions] [pnfsblock: bl_write_pagelist adjust for missing PG_USE_PNFS] Signed-off-by: Fred Isaman <iisaman@citi.umich.edu> [pnfsblock: handle errors when read or write pagelist.] Signed-off-by: Zhang Jingwang <yyalone@gmail.com> [pnfs-block: use new write_pagelist api] Signed-off-by: Benny Halevy <bhalevy@panasas.com> Signed-off-by: Benny Halevy <bhalevy@tonian.com> Signed-off-by: Jim Rees <rees@umich.edu> [SQUASHME: pnfsblock: mds_offset is set in the generic layer] Signed-off-by: Boaz Harrosh <bharrosh@panasas.com> Signed-off-by: Benny Halevy <bhalevy@tonian.com> [pnfsblock: mark IO error with NFS_LAYOUT_{RW|RO}_FAILED] Signed-off-by: Peng Tao <peng_tao@emc.com> [pnfsblock: SQUASHME: adjust to API change] Signed-off-by: Fred Isaman <iisaman@citi.umich.edu> [pnfsblock: fixup blksize alignment in bl_setup_layoutcommit] Signed-off-by: Benny Halevy <bhalevy@panasas.com> Signed-off-by: Benny Halevy <bhalevy@tonian.com> [pnfsblock: bl_write_pagelist adjust for missing PG_USE_PNFS] Signed-off-by: Fred Isaman <iisaman@citi.umich.edu> [pnfsblock: handle errors when read or write pagelist.] Signed-off-by: Zhang Jingwang <yyalone@gmail.com> [pnfs-block: use new write_pagelist api] Signed-off-by: Benny Halevy <bhalevy@panasas.com> Signed-off-by: Benny Halevy <bhalevy@tonian.com> Signed-off-by: Jim Rees <rees@umich.edu> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2011-07-31 08:52:54 +08:00
{
struct parallel_io *par = bio->bi_private;
struct nfs_pgio_header *header = par->data;
pnfsblock: bl_write_pagelist Note: When upper layer's read/write request cannot be fulfilled, the block layout driver shouldn't silently mark the page as error. It should do what can be done and leave the rest to the upper layer. To do so, we should set rdata/wdata->res.count properly. When upper layer re-send the read/write request to finish the rest part of the request, pgbase is the position where we should start at. [pnfsblock: bl_write_pagelist support functions] [pnfsblock: bl_write_pagelist adjust for missing PG_USE_PNFS] Signed-off-by: Fred Isaman <iisaman@citi.umich.edu> [pnfsblock: handle errors when read or write pagelist.] Signed-off-by: Zhang Jingwang <yyalone@gmail.com> [pnfs-block: use new write_pagelist api] Signed-off-by: Benny Halevy <bhalevy@panasas.com> Signed-off-by: Benny Halevy <bhalevy@tonian.com> Signed-off-by: Jim Rees <rees@umich.edu> [SQUASHME: pnfsblock: mds_offset is set in the generic layer] Signed-off-by: Boaz Harrosh <bharrosh@panasas.com> Signed-off-by: Benny Halevy <bhalevy@tonian.com> [pnfsblock: mark IO error with NFS_LAYOUT_{RW|RO}_FAILED] Signed-off-by: Peng Tao <peng_tao@emc.com> [pnfsblock: SQUASHME: adjust to API change] Signed-off-by: Fred Isaman <iisaman@citi.umich.edu> [pnfsblock: fixup blksize alignment in bl_setup_layoutcommit] Signed-off-by: Benny Halevy <bhalevy@panasas.com> Signed-off-by: Benny Halevy <bhalevy@tonian.com> [pnfsblock: bl_write_pagelist adjust for missing PG_USE_PNFS] Signed-off-by: Fred Isaman <iisaman@citi.umich.edu> [pnfsblock: handle errors when read or write pagelist.] Signed-off-by: Zhang Jingwang <yyalone@gmail.com> [pnfs-block: use new write_pagelist api] Signed-off-by: Benny Halevy <bhalevy@panasas.com> Signed-off-by: Benny Halevy <bhalevy@tonian.com> Signed-off-by: Jim Rees <rees@umich.edu> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2011-07-31 08:52:54 +08:00
if (bio->bi_status) {
if (!header->pnfs_error)
header->pnfs_error = -EIO;
pnfs_set_lo_fail(header->lseg);
pnfsblock: bl_write_pagelist Note: When upper layer's read/write request cannot be fulfilled, the block layout driver shouldn't silently mark the page as error. It should do what can be done and leave the rest to the upper layer. To do so, we should set rdata/wdata->res.count properly. When upper layer re-send the read/write request to finish the rest part of the request, pgbase is the position where we should start at. [pnfsblock: bl_write_pagelist support functions] [pnfsblock: bl_write_pagelist adjust for missing PG_USE_PNFS] Signed-off-by: Fred Isaman <iisaman@citi.umich.edu> [pnfsblock: handle errors when read or write pagelist.] Signed-off-by: Zhang Jingwang <yyalone@gmail.com> [pnfs-block: use new write_pagelist api] Signed-off-by: Benny Halevy <bhalevy@panasas.com> Signed-off-by: Benny Halevy <bhalevy@tonian.com> Signed-off-by: Jim Rees <rees@umich.edu> [SQUASHME: pnfsblock: mds_offset is set in the generic layer] Signed-off-by: Boaz Harrosh <bharrosh@panasas.com> Signed-off-by: Benny Halevy <bhalevy@tonian.com> [pnfsblock: mark IO error with NFS_LAYOUT_{RW|RO}_FAILED] Signed-off-by: Peng Tao <peng_tao@emc.com> [pnfsblock: SQUASHME: adjust to API change] Signed-off-by: Fred Isaman <iisaman@citi.umich.edu> [pnfsblock: fixup blksize alignment in bl_setup_layoutcommit] Signed-off-by: Benny Halevy <bhalevy@panasas.com> Signed-off-by: Benny Halevy <bhalevy@tonian.com> [pnfsblock: bl_write_pagelist adjust for missing PG_USE_PNFS] Signed-off-by: Fred Isaman <iisaman@citi.umich.edu> [pnfsblock: handle errors when read or write pagelist.] Signed-off-by: Zhang Jingwang <yyalone@gmail.com> [pnfs-block: use new write_pagelist api] Signed-off-by: Benny Halevy <bhalevy@panasas.com> Signed-off-by: Benny Halevy <bhalevy@tonian.com> Signed-off-by: Jim Rees <rees@umich.edu> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2011-07-31 08:52:54 +08:00
}
bio_put(bio);
put_parallel(par);
}
/* Function scheduled for call during bl_end_par_io_write,
* it marks sectors as written and extends the commitlist.
*/
static void bl_write_cleanup(struct work_struct *work)
{
pnfs/blocklayout: rewrite extent tracking Currently the block layout driver tracks extents in three separate data structures: - the two list of pnfs_block_extent structures returned by the server - the list of sectors that were in invalid state but have been written to - a list of pnfs_block_short_extent structures for LAYOUTCOMMIT All of these share the property that they are not only highly inefficient data structures, but also that operations on them are even more inefficient than nessecary. In addition there are various implementation defects like: - using an int to track sectors, causing corruption for large offsets - incorrect normalization of page or block granularity ranges - insufficient error handling - incorrect synchronization as extents can be modified while they are in use This patch replace all three data with a single unified rbtree structure tracking all extents, as well as their in-memory state, although we still need to instance for read-only and read-write extent due to the arcane client side COW feature in the block layouts spec. To fix the problem of extent possibly being modified while in use we make sure to return a copy of the extent for use in the write path - the extent can only be invalidated by a layout recall or return which has to wait until the I/O operations finished due to refcounts on the layout segment. The new extent tree work similar to the schemes used by block based filesystems like XFS or ext4. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2014-09-10 23:23:34 +08:00
struct rpc_task *task = container_of(work, struct rpc_task, u.tk_work);
struct nfs_pgio_header *hdr =
container_of(task, struct nfs_pgio_header, task);
pnfsblock: bl_write_pagelist Note: When upper layer's read/write request cannot be fulfilled, the block layout driver shouldn't silently mark the page as error. It should do what can be done and leave the rest to the upper layer. To do so, we should set rdata/wdata->res.count properly. When upper layer re-send the read/write request to finish the rest part of the request, pgbase is the position where we should start at. [pnfsblock: bl_write_pagelist support functions] [pnfsblock: bl_write_pagelist adjust for missing PG_USE_PNFS] Signed-off-by: Fred Isaman <iisaman@citi.umich.edu> [pnfsblock: handle errors when read or write pagelist.] Signed-off-by: Zhang Jingwang <yyalone@gmail.com> [pnfs-block: use new write_pagelist api] Signed-off-by: Benny Halevy <bhalevy@panasas.com> Signed-off-by: Benny Halevy <bhalevy@tonian.com> Signed-off-by: Jim Rees <rees@umich.edu> [SQUASHME: pnfsblock: mds_offset is set in the generic layer] Signed-off-by: Boaz Harrosh <bharrosh@panasas.com> Signed-off-by: Benny Halevy <bhalevy@tonian.com> [pnfsblock: mark IO error with NFS_LAYOUT_{RW|RO}_FAILED] Signed-off-by: Peng Tao <peng_tao@emc.com> [pnfsblock: SQUASHME: adjust to API change] Signed-off-by: Fred Isaman <iisaman@citi.umich.edu> [pnfsblock: fixup blksize alignment in bl_setup_layoutcommit] Signed-off-by: Benny Halevy <bhalevy@panasas.com> Signed-off-by: Benny Halevy <bhalevy@tonian.com> [pnfsblock: bl_write_pagelist adjust for missing PG_USE_PNFS] Signed-off-by: Fred Isaman <iisaman@citi.umich.edu> [pnfsblock: handle errors when read or write pagelist.] Signed-off-by: Zhang Jingwang <yyalone@gmail.com> [pnfs-block: use new write_pagelist api] Signed-off-by: Benny Halevy <bhalevy@panasas.com> Signed-off-by: Benny Halevy <bhalevy@tonian.com> Signed-off-by: Jim Rees <rees@umich.edu> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2011-07-31 08:52:54 +08:00
dprintk("%s enter\n", __func__);
pnfs/blocklayout: rewrite extent tracking Currently the block layout driver tracks extents in three separate data structures: - the two list of pnfs_block_extent structures returned by the server - the list of sectors that were in invalid state but have been written to - a list of pnfs_block_short_extent structures for LAYOUTCOMMIT All of these share the property that they are not only highly inefficient data structures, but also that operations on them are even more inefficient than nessecary. In addition there are various implementation defects like: - using an int to track sectors, causing corruption for large offsets - incorrect normalization of page or block granularity ranges - insufficient error handling - incorrect synchronization as extents can be modified while they are in use This patch replace all three data with a single unified rbtree structure tracking all extents, as well as their in-memory state, although we still need to instance for read-only and read-write extent due to the arcane client side COW feature in the block layouts spec. To fix the problem of extent possibly being modified while in use we make sure to return a copy of the extent for use in the write path - the extent can only be invalidated by a layout recall or return which has to wait until the I/O operations finished due to refcounts on the layout segment. The new extent tree work similar to the schemes used by block based filesystems like XFS or ext4. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2014-09-10 23:23:34 +08:00
if (likely(!hdr->pnfs_error)) {
pnfs/blocklayout: rewrite extent tracking Currently the block layout driver tracks extents in three separate data structures: - the two list of pnfs_block_extent structures returned by the server - the list of sectors that were in invalid state but have been written to - a list of pnfs_block_short_extent structures for LAYOUTCOMMIT All of these share the property that they are not only highly inefficient data structures, but also that operations on them are even more inefficient than nessecary. In addition there are various implementation defects like: - using an int to track sectors, causing corruption for large offsets - incorrect normalization of page or block granularity ranges - insufficient error handling - incorrect synchronization as extents can be modified while they are in use This patch replace all three data with a single unified rbtree structure tracking all extents, as well as their in-memory state, although we still need to instance for read-only and read-write extent due to the arcane client side COW feature in the block layouts spec. To fix the problem of extent possibly being modified while in use we make sure to return a copy of the extent for use in the write path - the extent can only be invalidated by a layout recall or return which has to wait until the I/O operations finished due to refcounts on the layout segment. The new extent tree work similar to the schemes used by block based filesystems like XFS or ext4. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2014-09-10 23:23:34 +08:00
struct pnfs_block_layout *bl = BLK_LSEG2EXT(hdr->lseg);
mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macros PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time ago with promise that one day it will be possible to implement page cache with bigger chunks than PAGE_SIZE. This promise never materialized. And unlikely will. We have many places where PAGE_CACHE_SIZE assumed to be equal to PAGE_SIZE. And it's constant source of confusion on whether PAGE_CACHE_* or PAGE_* constant should be used in a particular case, especially on the border between fs and mm. Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much breakage to be doable. Let's stop pretending that pages in page cache are special. They are not. The changes are pretty straight-forward: - <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN}; - page_cache_get() -> get_page(); - page_cache_release() -> put_page(); This patch contains automated changes generated with coccinelle using script below. For some reason, coccinelle doesn't patch header files. I've called spatch for them manually. The only adjustment after coccinelle is revert of changes to PAGE_CAHCE_ALIGN definition: we are going to drop it later. There are few places in the code where coccinelle didn't reach. I'll fix them manually in a separate patch. Comments and documentation also will be addressed with the separate patch. virtual patch @@ expression E; @@ - E << (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ expression E; @@ - E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ @@ - PAGE_CACHE_SHIFT + PAGE_SHIFT @@ @@ - PAGE_CACHE_SIZE + PAGE_SIZE @@ @@ - PAGE_CACHE_MASK + PAGE_MASK @@ expression E; @@ - PAGE_CACHE_ALIGN(E) + PAGE_ALIGN(E) @@ expression E; @@ - page_cache_get(E) + get_page(E) @@ expression E; @@ - page_cache_release(E) + put_page(E) Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-01 20:29:47 +08:00
u64 start = hdr->args.offset & (loff_t)PAGE_MASK;
pnfs/blocklayout: rewrite extent tracking Currently the block layout driver tracks extents in three separate data structures: - the two list of pnfs_block_extent structures returned by the server - the list of sectors that were in invalid state but have been written to - a list of pnfs_block_short_extent structures for LAYOUTCOMMIT All of these share the property that they are not only highly inefficient data structures, but also that operations on them are even more inefficient than nessecary. In addition there are various implementation defects like: - using an int to track sectors, causing corruption for large offsets - incorrect normalization of page or block granularity ranges - insufficient error handling - incorrect synchronization as extents can be modified while they are in use This patch replace all three data with a single unified rbtree structure tracking all extents, as well as their in-memory state, although we still need to instance for read-only and read-write extent due to the arcane client side COW feature in the block layouts spec. To fix the problem of extent possibly being modified while in use we make sure to return a copy of the extent for use in the write path - the extent can only be invalidated by a layout recall or return which has to wait until the I/O operations finished due to refcounts on the layout segment. The new extent tree work similar to the schemes used by block based filesystems like XFS or ext4. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2014-09-10 23:23:34 +08:00
u64 end = (hdr->args.offset + hdr->args.count +
mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macros PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time ago with promise that one day it will be possible to implement page cache with bigger chunks than PAGE_SIZE. This promise never materialized. And unlikely will. We have many places where PAGE_CACHE_SIZE assumed to be equal to PAGE_SIZE. And it's constant source of confusion on whether PAGE_CACHE_* or PAGE_* constant should be used in a particular case, especially on the border between fs and mm. Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much breakage to be doable. Let's stop pretending that pages in page cache are special. They are not. The changes are pretty straight-forward: - <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN}; - page_cache_get() -> get_page(); - page_cache_release() -> put_page(); This patch contains automated changes generated with coccinelle using script below. For some reason, coccinelle doesn't patch header files. I've called spatch for them manually. The only adjustment after coccinelle is revert of changes to PAGE_CAHCE_ALIGN definition: we are going to drop it later. There are few places in the code where coccinelle didn't reach. I'll fix them manually in a separate patch. Comments and documentation also will be addressed with the separate patch. virtual patch @@ expression E; @@ - E << (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ expression E; @@ - E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ @@ - PAGE_CACHE_SHIFT + PAGE_SHIFT @@ @@ - PAGE_CACHE_SIZE + PAGE_SIZE @@ @@ - PAGE_CACHE_MASK + PAGE_MASK @@ expression E; @@ - PAGE_CACHE_ALIGN(E) + PAGE_ALIGN(E) @@ expression E; @@ - page_cache_get(E) + get_page(E) @@ expression E; @@ - page_cache_release(E) + put_page(E) Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-01 20:29:47 +08:00
PAGE_SIZE - 1) & (loff_t)PAGE_MASK;
u64 lwb = hdr->args.offset + hdr->args.count;
pnfs/blocklayout: rewrite extent tracking Currently the block layout driver tracks extents in three separate data structures: - the two list of pnfs_block_extent structures returned by the server - the list of sectors that were in invalid state but have been written to - a list of pnfs_block_short_extent structures for LAYOUTCOMMIT All of these share the property that they are not only highly inefficient data structures, but also that operations on them are even more inefficient than nessecary. In addition there are various implementation defects like: - using an int to track sectors, causing corruption for large offsets - incorrect normalization of page or block granularity ranges - insufficient error handling - incorrect synchronization as extents can be modified while they are in use This patch replace all three data with a single unified rbtree structure tracking all extents, as well as their in-memory state, although we still need to instance for read-only and read-write extent due to the arcane client side COW feature in the block layouts spec. To fix the problem of extent possibly being modified while in use we make sure to return a copy of the extent for use in the write path - the extent can only be invalidated by a layout recall or return which has to wait until the I/O operations finished due to refcounts on the layout segment. The new extent tree work similar to the schemes used by block based filesystems like XFS or ext4. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2014-09-10 23:23:34 +08:00
ext_tree_mark_written(bl, start >> SECTOR_SHIFT,
(end - start) >> SECTOR_SHIFT, lwb);
}
pnfs/blocklayout: rewrite extent tracking Currently the block layout driver tracks extents in three separate data structures: - the two list of pnfs_block_extent structures returned by the server - the list of sectors that were in invalid state but have been written to - a list of pnfs_block_short_extent structures for LAYOUTCOMMIT All of these share the property that they are not only highly inefficient data structures, but also that operations on them are even more inefficient than nessecary. In addition there are various implementation defects like: - using an int to track sectors, causing corruption for large offsets - incorrect normalization of page or block granularity ranges - insufficient error handling - incorrect synchronization as extents can be modified while they are in use This patch replace all three data with a single unified rbtree structure tracking all extents, as well as their in-memory state, although we still need to instance for read-only and read-write extent due to the arcane client side COW feature in the block layouts spec. To fix the problem of extent possibly being modified while in use we make sure to return a copy of the extent for use in the write path - the extent can only be invalidated by a layout recall or return which has to wait until the I/O operations finished due to refcounts on the layout segment. The new extent tree work similar to the schemes used by block based filesystems like XFS or ext4. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2014-09-10 23:23:34 +08:00
pnfs_ld_write_done(hdr);
pnfsblock: bl_write_pagelist Note: When upper layer's read/write request cannot be fulfilled, the block layout driver shouldn't silently mark the page as error. It should do what can be done and leave the rest to the upper layer. To do so, we should set rdata/wdata->res.count properly. When upper layer re-send the read/write request to finish the rest part of the request, pgbase is the position where we should start at. [pnfsblock: bl_write_pagelist support functions] [pnfsblock: bl_write_pagelist adjust for missing PG_USE_PNFS] Signed-off-by: Fred Isaman <iisaman@citi.umich.edu> [pnfsblock: handle errors when read or write pagelist.] Signed-off-by: Zhang Jingwang <yyalone@gmail.com> [pnfs-block: use new write_pagelist api] Signed-off-by: Benny Halevy <bhalevy@panasas.com> Signed-off-by: Benny Halevy <bhalevy@tonian.com> Signed-off-by: Jim Rees <rees@umich.edu> [SQUASHME: pnfsblock: mds_offset is set in the generic layer] Signed-off-by: Boaz Harrosh <bharrosh@panasas.com> Signed-off-by: Benny Halevy <bhalevy@tonian.com> [pnfsblock: mark IO error with NFS_LAYOUT_{RW|RO}_FAILED] Signed-off-by: Peng Tao <peng_tao@emc.com> [pnfsblock: SQUASHME: adjust to API change] Signed-off-by: Fred Isaman <iisaman@citi.umich.edu> [pnfsblock: fixup blksize alignment in bl_setup_layoutcommit] Signed-off-by: Benny Halevy <bhalevy@panasas.com> Signed-off-by: Benny Halevy <bhalevy@tonian.com> [pnfsblock: bl_write_pagelist adjust for missing PG_USE_PNFS] Signed-off-by: Fred Isaman <iisaman@citi.umich.edu> [pnfsblock: handle errors when read or write pagelist.] Signed-off-by: Zhang Jingwang <yyalone@gmail.com> [pnfs-block: use new write_pagelist api] Signed-off-by: Benny Halevy <bhalevy@panasas.com> Signed-off-by: Benny Halevy <bhalevy@tonian.com> Signed-off-by: Jim Rees <rees@umich.edu> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2011-07-31 08:52:54 +08:00
}
/* Called when last of bios associated with a bl_write_pagelist call finishes */
pnfs/blocklayout: rewrite extent tracking Currently the block layout driver tracks extents in three separate data structures: - the two list of pnfs_block_extent structures returned by the server - the list of sectors that were in invalid state but have been written to - a list of pnfs_block_short_extent structures for LAYOUTCOMMIT All of these share the property that they are not only highly inefficient data structures, but also that operations on them are even more inefficient than nessecary. In addition there are various implementation defects like: - using an int to track sectors, causing corruption for large offsets - incorrect normalization of page or block granularity ranges - insufficient error handling - incorrect synchronization as extents can be modified while they are in use This patch replace all three data with a single unified rbtree structure tracking all extents, as well as their in-memory state, although we still need to instance for read-only and read-write extent due to the arcane client side COW feature in the block layouts spec. To fix the problem of extent possibly being modified while in use we make sure to return a copy of the extent for use in the write path - the extent can only be invalidated by a layout recall or return which has to wait until the I/O operations finished due to refcounts on the layout segment. The new extent tree work similar to the schemes used by block based filesystems like XFS or ext4. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2014-09-10 23:23:34 +08:00
static void bl_end_par_io_write(void *data)
pnfsblock: bl_write_pagelist Note: When upper layer's read/write request cannot be fulfilled, the block layout driver shouldn't silently mark the page as error. It should do what can be done and leave the rest to the upper layer. To do so, we should set rdata/wdata->res.count properly. When upper layer re-send the read/write request to finish the rest part of the request, pgbase is the position where we should start at. [pnfsblock: bl_write_pagelist support functions] [pnfsblock: bl_write_pagelist adjust for missing PG_USE_PNFS] Signed-off-by: Fred Isaman <iisaman@citi.umich.edu> [pnfsblock: handle errors when read or write pagelist.] Signed-off-by: Zhang Jingwang <yyalone@gmail.com> [pnfs-block: use new write_pagelist api] Signed-off-by: Benny Halevy <bhalevy@panasas.com> Signed-off-by: Benny Halevy <bhalevy@tonian.com> Signed-off-by: Jim Rees <rees@umich.edu> [SQUASHME: pnfsblock: mds_offset is set in the generic layer] Signed-off-by: Boaz Harrosh <bharrosh@panasas.com> Signed-off-by: Benny Halevy <bhalevy@tonian.com> [pnfsblock: mark IO error with NFS_LAYOUT_{RW|RO}_FAILED] Signed-off-by: Peng Tao <peng_tao@emc.com> [pnfsblock: SQUASHME: adjust to API change] Signed-off-by: Fred Isaman <iisaman@citi.umich.edu> [pnfsblock: fixup blksize alignment in bl_setup_layoutcommit] Signed-off-by: Benny Halevy <bhalevy@panasas.com> Signed-off-by: Benny Halevy <bhalevy@tonian.com> [pnfsblock: bl_write_pagelist adjust for missing PG_USE_PNFS] Signed-off-by: Fred Isaman <iisaman@citi.umich.edu> [pnfsblock: handle errors when read or write pagelist.] Signed-off-by: Zhang Jingwang <yyalone@gmail.com> [pnfs-block: use new write_pagelist api] Signed-off-by: Benny Halevy <bhalevy@panasas.com> Signed-off-by: Benny Halevy <bhalevy@tonian.com> Signed-off-by: Jim Rees <rees@umich.edu> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2011-07-31 08:52:54 +08:00
{
struct nfs_pgio_header *hdr = data;
pnfsblock: bl_write_pagelist Note: When upper layer's read/write request cannot be fulfilled, the block layout driver shouldn't silently mark the page as error. It should do what can be done and leave the rest to the upper layer. To do so, we should set rdata/wdata->res.count properly. When upper layer re-send the read/write request to finish the rest part of the request, pgbase is the position where we should start at. [pnfsblock: bl_write_pagelist support functions] [pnfsblock: bl_write_pagelist adjust for missing PG_USE_PNFS] Signed-off-by: Fred Isaman <iisaman@citi.umich.edu> [pnfsblock: handle errors when read or write pagelist.] Signed-off-by: Zhang Jingwang <yyalone@gmail.com> [pnfs-block: use new write_pagelist api] Signed-off-by: Benny Halevy <bhalevy@panasas.com> Signed-off-by: Benny Halevy <bhalevy@tonian.com> Signed-off-by: Jim Rees <rees@umich.edu> [SQUASHME: pnfsblock: mds_offset is set in the generic layer] Signed-off-by: Boaz Harrosh <bharrosh@panasas.com> Signed-off-by: Benny Halevy <bhalevy@tonian.com> [pnfsblock: mark IO error with NFS_LAYOUT_{RW|RO}_FAILED] Signed-off-by: Peng Tao <peng_tao@emc.com> [pnfsblock: SQUASHME: adjust to API change] Signed-off-by: Fred Isaman <iisaman@citi.umich.edu> [pnfsblock: fixup blksize alignment in bl_setup_layoutcommit] Signed-off-by: Benny Halevy <bhalevy@panasas.com> Signed-off-by: Benny Halevy <bhalevy@tonian.com> [pnfsblock: bl_write_pagelist adjust for missing PG_USE_PNFS] Signed-off-by: Fred Isaman <iisaman@citi.umich.edu> [pnfsblock: handle errors when read or write pagelist.] Signed-off-by: Zhang Jingwang <yyalone@gmail.com> [pnfs-block: use new write_pagelist api] Signed-off-by: Benny Halevy <bhalevy@panasas.com> Signed-off-by: Benny Halevy <bhalevy@tonian.com> Signed-off-by: Jim Rees <rees@umich.edu> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2011-07-31 08:52:54 +08:00
hdr->task.tk_status = hdr->pnfs_error;
hdr->verf.committed = NFS_FILE_SYNC;
INIT_WORK(&hdr->task.u.tk_work, bl_write_cleanup);
schedule_work(&hdr->task.u.tk_work);
pnfsblock: bl_write_pagelist Note: When upper layer's read/write request cannot be fulfilled, the block layout driver shouldn't silently mark the page as error. It should do what can be done and leave the rest to the upper layer. To do so, we should set rdata/wdata->res.count properly. When upper layer re-send the read/write request to finish the rest part of the request, pgbase is the position where we should start at. [pnfsblock: bl_write_pagelist support functions] [pnfsblock: bl_write_pagelist adjust for missing PG_USE_PNFS] Signed-off-by: Fred Isaman <iisaman@citi.umich.edu> [pnfsblock: handle errors when read or write pagelist.] Signed-off-by: Zhang Jingwang <yyalone@gmail.com> [pnfs-block: use new write_pagelist api] Signed-off-by: Benny Halevy <bhalevy@panasas.com> Signed-off-by: Benny Halevy <bhalevy@tonian.com> Signed-off-by: Jim Rees <rees@umich.edu> [SQUASHME: pnfsblock: mds_offset is set in the generic layer] Signed-off-by: Boaz Harrosh <bharrosh@panasas.com> Signed-off-by: Benny Halevy <bhalevy@tonian.com> [pnfsblock: mark IO error with NFS_LAYOUT_{RW|RO}_FAILED] Signed-off-by: Peng Tao <peng_tao@emc.com> [pnfsblock: SQUASHME: adjust to API change] Signed-off-by: Fred Isaman <iisaman@citi.umich.edu> [pnfsblock: fixup blksize alignment in bl_setup_layoutcommit] Signed-off-by: Benny Halevy <bhalevy@panasas.com> Signed-off-by: Benny Halevy <bhalevy@tonian.com> [pnfsblock: bl_write_pagelist adjust for missing PG_USE_PNFS] Signed-off-by: Fred Isaman <iisaman@citi.umich.edu> [pnfsblock: handle errors when read or write pagelist.] Signed-off-by: Zhang Jingwang <yyalone@gmail.com> [pnfs-block: use new write_pagelist api] Signed-off-by: Benny Halevy <bhalevy@panasas.com> Signed-off-by: Benny Halevy <bhalevy@tonian.com> Signed-off-by: Jim Rees <rees@umich.edu> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2011-07-31 08:52:54 +08:00
}
static enum pnfs_try_status
bl_write_pagelist(struct nfs_pgio_header *header, int sync)
{
pnfs/blocklayout: rewrite extent tracking Currently the block layout driver tracks extents in three separate data structures: - the two list of pnfs_block_extent structures returned by the server - the list of sectors that were in invalid state but have been written to - a list of pnfs_block_short_extent structures for LAYOUTCOMMIT All of these share the property that they are not only highly inefficient data structures, but also that operations on them are even more inefficient than nessecary. In addition there are various implementation defects like: - using an int to track sectors, causing corruption for large offsets - incorrect normalization of page or block granularity ranges - insufficient error handling - incorrect synchronization as extents can be modified while they are in use This patch replace all three data with a single unified rbtree structure tracking all extents, as well as their in-memory state, although we still need to instance for read-only and read-write extent due to the arcane client side COW feature in the block layouts spec. To fix the problem of extent possibly being modified while in use we make sure to return a copy of the extent for use in the write path - the extent can only be invalidated by a layout recall or return which has to wait until the I/O operations finished due to refcounts on the layout segment. The new extent tree work similar to the schemes used by block based filesystems like XFS or ext4. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2014-09-10 23:23:34 +08:00
struct pnfs_block_layout *bl = BLK_LSEG2EXT(header->lseg);
struct pnfs_block_dev_map map = { .start = NFS4_MAX_UINT64 };
pnfsblock: bl_write_pagelist Note: When upper layer's read/write request cannot be fulfilled, the block layout driver shouldn't silently mark the page as error. It should do what can be done and leave the rest to the upper layer. To do so, we should set rdata/wdata->res.count properly. When upper layer re-send the read/write request to finish the rest part of the request, pgbase is the position where we should start at. [pnfsblock: bl_write_pagelist support functions] [pnfsblock: bl_write_pagelist adjust for missing PG_USE_PNFS] Signed-off-by: Fred Isaman <iisaman@citi.umich.edu> [pnfsblock: handle errors when read or write pagelist.] Signed-off-by: Zhang Jingwang <yyalone@gmail.com> [pnfs-block: use new write_pagelist api] Signed-off-by: Benny Halevy <bhalevy@panasas.com> Signed-off-by: Benny Halevy <bhalevy@tonian.com> Signed-off-by: Jim Rees <rees@umich.edu> [SQUASHME: pnfsblock: mds_offset is set in the generic layer] Signed-off-by: Boaz Harrosh <bharrosh@panasas.com> Signed-off-by: Benny Halevy <bhalevy@tonian.com> [pnfsblock: mark IO error with NFS_LAYOUT_{RW|RO}_FAILED] Signed-off-by: Peng Tao <peng_tao@emc.com> [pnfsblock: SQUASHME: adjust to API change] Signed-off-by: Fred Isaman <iisaman@citi.umich.edu> [pnfsblock: fixup blksize alignment in bl_setup_layoutcommit] Signed-off-by: Benny Halevy <bhalevy@panasas.com> Signed-off-by: Benny Halevy <bhalevy@tonian.com> [pnfsblock: bl_write_pagelist adjust for missing PG_USE_PNFS] Signed-off-by: Fred Isaman <iisaman@citi.umich.edu> [pnfsblock: handle errors when read or write pagelist.] Signed-off-by: Zhang Jingwang <yyalone@gmail.com> [pnfs-block: use new write_pagelist api] Signed-off-by: Benny Halevy <bhalevy@panasas.com> Signed-off-by: Benny Halevy <bhalevy@tonian.com> Signed-off-by: Jim Rees <rees@umich.edu> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2011-07-31 08:52:54 +08:00
struct bio *bio = NULL;
pnfs/blocklayout: rewrite extent tracking Currently the block layout driver tracks extents in three separate data structures: - the two list of pnfs_block_extent structures returned by the server - the list of sectors that were in invalid state but have been written to - a list of pnfs_block_short_extent structures for LAYOUTCOMMIT All of these share the property that they are not only highly inefficient data structures, but also that operations on them are even more inefficient than nessecary. In addition there are various implementation defects like: - using an int to track sectors, causing corruption for large offsets - incorrect normalization of page or block granularity ranges - insufficient error handling - incorrect synchronization as extents can be modified while they are in use This patch replace all three data with a single unified rbtree structure tracking all extents, as well as their in-memory state, although we still need to instance for read-only and read-write extent due to the arcane client side COW feature in the block layouts spec. To fix the problem of extent possibly being modified while in use we make sure to return a copy of the extent for use in the write path - the extent can only be invalidated by a layout recall or return which has to wait until the I/O operations finished due to refcounts on the layout segment. The new extent tree work similar to the schemes used by block based filesystems like XFS or ext4. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2014-09-10 23:23:34 +08:00
struct pnfs_block_extent be;
sector_t isect, extent_length = 0;
struct parallel_io *par = NULL;
loff_t offset = header->args.offset;
size_t count = header->args.count;
struct page **pages = header->args.pages;
mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macros PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time ago with promise that one day it will be possible to implement page cache with bigger chunks than PAGE_SIZE. This promise never materialized. And unlikely will. We have many places where PAGE_CACHE_SIZE assumed to be equal to PAGE_SIZE. And it's constant source of confusion on whether PAGE_CACHE_* or PAGE_* constant should be used in a particular case, especially on the border between fs and mm. Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much breakage to be doable. Let's stop pretending that pages in page cache are special. They are not. The changes are pretty straight-forward: - <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN}; - page_cache_get() -> get_page(); - page_cache_release() -> put_page(); This patch contains automated changes generated with coccinelle using script below. For some reason, coccinelle doesn't patch header files. I've called spatch for them manually. The only adjustment after coccinelle is revert of changes to PAGE_CAHCE_ALIGN definition: we are going to drop it later. There are few places in the code where coccinelle didn't reach. I'll fix them manually in a separate patch. Comments and documentation also will be addressed with the separate patch. virtual patch @@ expression E; @@ - E << (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ expression E; @@ - E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ @@ - PAGE_CACHE_SHIFT + PAGE_SHIFT @@ @@ - PAGE_CACHE_SIZE + PAGE_SIZE @@ @@ - PAGE_CACHE_MASK + PAGE_MASK @@ expression E; @@ - PAGE_CACHE_ALIGN(E) + PAGE_ALIGN(E) @@ expression E; @@ - page_cache_get(E) + get_page(E) @@ expression E; @@ - page_cache_release(E) + put_page(E) Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-01 20:29:47 +08:00
int pg_index = header->args.pgbase >> PAGE_SHIFT;
unsigned int pg_len;
struct blk_plug plug;
pnfs/blocklayout: rewrite extent tracking Currently the block layout driver tracks extents in three separate data structures: - the two list of pnfs_block_extent structures returned by the server - the list of sectors that were in invalid state but have been written to - a list of pnfs_block_short_extent structures for LAYOUTCOMMIT All of these share the property that they are not only highly inefficient data structures, but also that operations on them are even more inefficient than nessecary. In addition there are various implementation defects like: - using an int to track sectors, causing corruption for large offsets - incorrect normalization of page or block granularity ranges - insufficient error handling - incorrect synchronization as extents can be modified while they are in use This patch replace all three data with a single unified rbtree structure tracking all extents, as well as their in-memory state, although we still need to instance for read-only and read-write extent due to the arcane client side COW feature in the block layouts spec. To fix the problem of extent possibly being modified while in use we make sure to return a copy of the extent for use in the write path - the extent can only be invalidated by a layout recall or return which has to wait until the I/O operations finished due to refcounts on the layout segment. The new extent tree work similar to the schemes used by block based filesystems like XFS or ext4. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2014-09-10 23:23:34 +08:00
int i;
pnfsblock: bl_write_pagelist Note: When upper layer's read/write request cannot be fulfilled, the block layout driver shouldn't silently mark the page as error. It should do what can be done and leave the rest to the upper layer. To do so, we should set rdata/wdata->res.count properly. When upper layer re-send the read/write request to finish the rest part of the request, pgbase is the position where we should start at. [pnfsblock: bl_write_pagelist support functions] [pnfsblock: bl_write_pagelist adjust for missing PG_USE_PNFS] Signed-off-by: Fred Isaman <iisaman@citi.umich.edu> [pnfsblock: handle errors when read or write pagelist.] Signed-off-by: Zhang Jingwang <yyalone@gmail.com> [pnfs-block: use new write_pagelist api] Signed-off-by: Benny Halevy <bhalevy@panasas.com> Signed-off-by: Benny Halevy <bhalevy@tonian.com> Signed-off-by: Jim Rees <rees@umich.edu> [SQUASHME: pnfsblock: mds_offset is set in the generic layer] Signed-off-by: Boaz Harrosh <bharrosh@panasas.com> Signed-off-by: Benny Halevy <bhalevy@tonian.com> [pnfsblock: mark IO error with NFS_LAYOUT_{RW|RO}_FAILED] Signed-off-by: Peng Tao <peng_tao@emc.com> [pnfsblock: SQUASHME: adjust to API change] Signed-off-by: Fred Isaman <iisaman@citi.umich.edu> [pnfsblock: fixup blksize alignment in bl_setup_layoutcommit] Signed-off-by: Benny Halevy <bhalevy@panasas.com> Signed-off-by: Benny Halevy <bhalevy@tonian.com> [pnfsblock: bl_write_pagelist adjust for missing PG_USE_PNFS] Signed-off-by: Fred Isaman <iisaman@citi.umich.edu> [pnfsblock: handle errors when read or write pagelist.] Signed-off-by: Zhang Jingwang <yyalone@gmail.com> [pnfs-block: use new write_pagelist api] Signed-off-by: Benny Halevy <bhalevy@panasas.com> Signed-off-by: Benny Halevy <bhalevy@tonian.com> Signed-off-by: Jim Rees <rees@umich.edu> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2011-07-31 08:52:54 +08:00
dprintk("%s enter, %zu@%lld\n", __func__, count, offset);
/* At this point, header->page_aray is a (sequential) list of nfs_pages.
* We want to write each, and if there is an error set pnfs_error
* to have it redone using nfs.
pnfsblock: bl_write_pagelist Note: When upper layer's read/write request cannot be fulfilled, the block layout driver shouldn't silently mark the page as error. It should do what can be done and leave the rest to the upper layer. To do so, we should set rdata/wdata->res.count properly. When upper layer re-send the read/write request to finish the rest part of the request, pgbase is the position where we should start at. [pnfsblock: bl_write_pagelist support functions] [pnfsblock: bl_write_pagelist adjust for missing PG_USE_PNFS] Signed-off-by: Fred Isaman <iisaman@citi.umich.edu> [pnfsblock: handle errors when read or write pagelist.] Signed-off-by: Zhang Jingwang <yyalone@gmail.com> [pnfs-block: use new write_pagelist api] Signed-off-by: Benny Halevy <bhalevy@panasas.com> Signed-off-by: Benny Halevy <bhalevy@tonian.com> Signed-off-by: Jim Rees <rees@umich.edu> [SQUASHME: pnfsblock: mds_offset is set in the generic layer] Signed-off-by: Boaz Harrosh <bharrosh@panasas.com> Signed-off-by: Benny Halevy <bhalevy@tonian.com> [pnfsblock: mark IO error with NFS_LAYOUT_{RW|RO}_FAILED] Signed-off-by: Peng Tao <peng_tao@emc.com> [pnfsblock: SQUASHME: adjust to API change] Signed-off-by: Fred Isaman <iisaman@citi.umich.edu> [pnfsblock: fixup blksize alignment in bl_setup_layoutcommit] Signed-off-by: Benny Halevy <bhalevy@panasas.com> Signed-off-by: Benny Halevy <bhalevy@tonian.com> [pnfsblock: bl_write_pagelist adjust for missing PG_USE_PNFS] Signed-off-by: Fred Isaman <iisaman@citi.umich.edu> [pnfsblock: handle errors when read or write pagelist.] Signed-off-by: Zhang Jingwang <yyalone@gmail.com> [pnfs-block: use new write_pagelist api] Signed-off-by: Benny Halevy <bhalevy@panasas.com> Signed-off-by: Benny Halevy <bhalevy@tonian.com> Signed-off-by: Jim Rees <rees@umich.edu> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2011-07-31 08:52:54 +08:00
*/
par = alloc_parallel(header);
pnfsblock: bl_write_pagelist Note: When upper layer's read/write request cannot be fulfilled, the block layout driver shouldn't silently mark the page as error. It should do what can be done and leave the rest to the upper layer. To do so, we should set rdata/wdata->res.count properly. When upper layer re-send the read/write request to finish the rest part of the request, pgbase is the position where we should start at. [pnfsblock: bl_write_pagelist support functions] [pnfsblock: bl_write_pagelist adjust for missing PG_USE_PNFS] Signed-off-by: Fred Isaman <iisaman@citi.umich.edu> [pnfsblock: handle errors when read or write pagelist.] Signed-off-by: Zhang Jingwang <yyalone@gmail.com> [pnfs-block: use new write_pagelist api] Signed-off-by: Benny Halevy <bhalevy@panasas.com> Signed-off-by: Benny Halevy <bhalevy@tonian.com> Signed-off-by: Jim Rees <rees@umich.edu> [SQUASHME: pnfsblock: mds_offset is set in the generic layer] Signed-off-by: Boaz Harrosh <bharrosh@panasas.com> Signed-off-by: Benny Halevy <bhalevy@tonian.com> [pnfsblock: mark IO error with NFS_LAYOUT_{RW|RO}_FAILED] Signed-off-by: Peng Tao <peng_tao@emc.com> [pnfsblock: SQUASHME: adjust to API change] Signed-off-by: Fred Isaman <iisaman@citi.umich.edu> [pnfsblock: fixup blksize alignment in bl_setup_layoutcommit] Signed-off-by: Benny Halevy <bhalevy@panasas.com> Signed-off-by: Benny Halevy <bhalevy@tonian.com> [pnfsblock: bl_write_pagelist adjust for missing PG_USE_PNFS] Signed-off-by: Fred Isaman <iisaman@citi.umich.edu> [pnfsblock: handle errors when read or write pagelist.] Signed-off-by: Zhang Jingwang <yyalone@gmail.com> [pnfs-block: use new write_pagelist api] Signed-off-by: Benny Halevy <bhalevy@panasas.com> Signed-off-by: Benny Halevy <bhalevy@tonian.com> Signed-off-by: Jim Rees <rees@umich.edu> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2011-07-31 08:52:54 +08:00
if (!par)
pnfs/blocklayout: rewrite extent tracking Currently the block layout driver tracks extents in three separate data structures: - the two list of pnfs_block_extent structures returned by the server - the list of sectors that were in invalid state but have been written to - a list of pnfs_block_short_extent structures for LAYOUTCOMMIT All of these share the property that they are not only highly inefficient data structures, but also that operations on them are even more inefficient than nessecary. In addition there are various implementation defects like: - using an int to track sectors, causing corruption for large offsets - incorrect normalization of page or block granularity ranges - insufficient error handling - incorrect synchronization as extents can be modified while they are in use This patch replace all three data with a single unified rbtree structure tracking all extents, as well as their in-memory state, although we still need to instance for read-only and read-write extent due to the arcane client side COW feature in the block layouts spec. To fix the problem of extent possibly being modified while in use we make sure to return a copy of the extent for use in the write path - the extent can only be invalidated by a layout recall or return which has to wait until the I/O operations finished due to refcounts on the layout segment. The new extent tree work similar to the schemes used by block based filesystems like XFS or ext4. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2014-09-10 23:23:34 +08:00
return PNFS_NOT_ATTEMPTED;
pnfsblock: bl_write_pagelist Note: When upper layer's read/write request cannot be fulfilled, the block layout driver shouldn't silently mark the page as error. It should do what can be done and leave the rest to the upper layer. To do so, we should set rdata/wdata->res.count properly. When upper layer re-send the read/write request to finish the rest part of the request, pgbase is the position where we should start at. [pnfsblock: bl_write_pagelist support functions] [pnfsblock: bl_write_pagelist adjust for missing PG_USE_PNFS] Signed-off-by: Fred Isaman <iisaman@citi.umich.edu> [pnfsblock: handle errors when read or write pagelist.] Signed-off-by: Zhang Jingwang <yyalone@gmail.com> [pnfs-block: use new write_pagelist api] Signed-off-by: Benny Halevy <bhalevy@panasas.com> Signed-off-by: Benny Halevy <bhalevy@tonian.com> Signed-off-by: Jim Rees <rees@umich.edu> [SQUASHME: pnfsblock: mds_offset is set in the generic layer] Signed-off-by: Boaz Harrosh <bharrosh@panasas.com> Signed-off-by: Benny Halevy <bhalevy@tonian.com> [pnfsblock: mark IO error with NFS_LAYOUT_{RW|RO}_FAILED] Signed-off-by: Peng Tao <peng_tao@emc.com> [pnfsblock: SQUASHME: adjust to API change] Signed-off-by: Fred Isaman <iisaman@citi.umich.edu> [pnfsblock: fixup blksize alignment in bl_setup_layoutcommit] Signed-off-by: Benny Halevy <bhalevy@panasas.com> Signed-off-by: Benny Halevy <bhalevy@tonian.com> [pnfsblock: bl_write_pagelist adjust for missing PG_USE_PNFS] Signed-off-by: Fred Isaman <iisaman@citi.umich.edu> [pnfsblock: handle errors when read or write pagelist.] Signed-off-by: Zhang Jingwang <yyalone@gmail.com> [pnfs-block: use new write_pagelist api] Signed-off-by: Benny Halevy <bhalevy@panasas.com> Signed-off-by: Benny Halevy <bhalevy@tonian.com> Signed-off-by: Jim Rees <rees@umich.edu> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2011-07-31 08:52:54 +08:00
par->pnfs_callback = bl_end_par_io_write;
blk_start_plug(&plug);
/* we always write out the whole page */
mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macros PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time ago with promise that one day it will be possible to implement page cache with bigger chunks than PAGE_SIZE. This promise never materialized. And unlikely will. We have many places where PAGE_CACHE_SIZE assumed to be equal to PAGE_SIZE. And it's constant source of confusion on whether PAGE_CACHE_* or PAGE_* constant should be used in a particular case, especially on the border between fs and mm. Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much breakage to be doable. Let's stop pretending that pages in page cache are special. They are not. The changes are pretty straight-forward: - <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN}; - page_cache_get() -> get_page(); - page_cache_release() -> put_page(); This patch contains automated changes generated with coccinelle using script below. For some reason, coccinelle doesn't patch header files. I've called spatch for them manually. The only adjustment after coccinelle is revert of changes to PAGE_CAHCE_ALIGN definition: we are going to drop it later. There are few places in the code where coccinelle didn't reach. I'll fix them manually in a separate patch. Comments and documentation also will be addressed with the separate patch. virtual patch @@ expression E; @@ - E << (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ expression E; @@ - E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ @@ - PAGE_CACHE_SHIFT + PAGE_SHIFT @@ @@ - PAGE_CACHE_SIZE + PAGE_SIZE @@ @@ - PAGE_CACHE_MASK + PAGE_MASK @@ expression E; @@ - PAGE_CACHE_ALIGN(E) + PAGE_ALIGN(E) @@ expression E; @@ - page_cache_get(E) + get_page(E) @@ expression E; @@ - page_cache_release(E) + put_page(E) Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-01 20:29:47 +08:00
offset = offset & (loff_t)PAGE_MASK;
isect = offset >> SECTOR_SHIFT;
for (i = pg_index; i < header->page_array.npages; i++) {
if (extent_length <= 0) {
pnfsblock: bl_write_pagelist Note: When upper layer's read/write request cannot be fulfilled, the block layout driver shouldn't silently mark the page as error. It should do what can be done and leave the rest to the upper layer. To do so, we should set rdata/wdata->res.count properly. When upper layer re-send the read/write request to finish the rest part of the request, pgbase is the position where we should start at. [pnfsblock: bl_write_pagelist support functions] [pnfsblock: bl_write_pagelist adjust for missing PG_USE_PNFS] Signed-off-by: Fred Isaman <iisaman@citi.umich.edu> [pnfsblock: handle errors when read or write pagelist.] Signed-off-by: Zhang Jingwang <yyalone@gmail.com> [pnfs-block: use new write_pagelist api] Signed-off-by: Benny Halevy <bhalevy@panasas.com> Signed-off-by: Benny Halevy <bhalevy@tonian.com> Signed-off-by: Jim Rees <rees@umich.edu> [SQUASHME: pnfsblock: mds_offset is set in the generic layer] Signed-off-by: Boaz Harrosh <bharrosh@panasas.com> Signed-off-by: Benny Halevy <bhalevy@tonian.com> [pnfsblock: mark IO error with NFS_LAYOUT_{RW|RO}_FAILED] Signed-off-by: Peng Tao <peng_tao@emc.com> [pnfsblock: SQUASHME: adjust to API change] Signed-off-by: Fred Isaman <iisaman@citi.umich.edu> [pnfsblock: fixup blksize alignment in bl_setup_layoutcommit] Signed-off-by: Benny Halevy <bhalevy@panasas.com> Signed-off-by: Benny Halevy <bhalevy@tonian.com> [pnfsblock: bl_write_pagelist adjust for missing PG_USE_PNFS] Signed-off-by: Fred Isaman <iisaman@citi.umich.edu> [pnfsblock: handle errors when read or write pagelist.] Signed-off-by: Zhang Jingwang <yyalone@gmail.com> [pnfs-block: use new write_pagelist api] Signed-off-by: Benny Halevy <bhalevy@panasas.com> Signed-off-by: Benny Halevy <bhalevy@tonian.com> Signed-off-by: Jim Rees <rees@umich.edu> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2011-07-31 08:52:54 +08:00
/* We've used up the previous extent */
bio = bl_submit_bio(bio);
pnfsblock: bl_write_pagelist Note: When upper layer's read/write request cannot be fulfilled, the block layout driver shouldn't silently mark the page as error. It should do what can be done and leave the rest to the upper layer. To do so, we should set rdata/wdata->res.count properly. When upper layer re-send the read/write request to finish the rest part of the request, pgbase is the position where we should start at. [pnfsblock: bl_write_pagelist support functions] [pnfsblock: bl_write_pagelist adjust for missing PG_USE_PNFS] Signed-off-by: Fred Isaman <iisaman@citi.umich.edu> [pnfsblock: handle errors when read or write pagelist.] Signed-off-by: Zhang Jingwang <yyalone@gmail.com> [pnfs-block: use new write_pagelist api] Signed-off-by: Benny Halevy <bhalevy@panasas.com> Signed-off-by: Benny Halevy <bhalevy@tonian.com> Signed-off-by: Jim Rees <rees@umich.edu> [SQUASHME: pnfsblock: mds_offset is set in the generic layer] Signed-off-by: Boaz Harrosh <bharrosh@panasas.com> Signed-off-by: Benny Halevy <bhalevy@tonian.com> [pnfsblock: mark IO error with NFS_LAYOUT_{RW|RO}_FAILED] Signed-off-by: Peng Tao <peng_tao@emc.com> [pnfsblock: SQUASHME: adjust to API change] Signed-off-by: Fred Isaman <iisaman@citi.umich.edu> [pnfsblock: fixup blksize alignment in bl_setup_layoutcommit] Signed-off-by: Benny Halevy <bhalevy@panasas.com> Signed-off-by: Benny Halevy <bhalevy@tonian.com> [pnfsblock: bl_write_pagelist adjust for missing PG_USE_PNFS] Signed-off-by: Fred Isaman <iisaman@citi.umich.edu> [pnfsblock: handle errors when read or write pagelist.] Signed-off-by: Zhang Jingwang <yyalone@gmail.com> [pnfs-block: use new write_pagelist api] Signed-off-by: Benny Halevy <bhalevy@panasas.com> Signed-off-by: Benny Halevy <bhalevy@tonian.com> Signed-off-by: Jim Rees <rees@umich.edu> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2011-07-31 08:52:54 +08:00
/* Get the next one */
pnfs/blocklayout: rewrite extent tracking Currently the block layout driver tracks extents in three separate data structures: - the two list of pnfs_block_extent structures returned by the server - the list of sectors that were in invalid state but have been written to - a list of pnfs_block_short_extent structures for LAYOUTCOMMIT All of these share the property that they are not only highly inefficient data structures, but also that operations on them are even more inefficient than nessecary. In addition there are various implementation defects like: - using an int to track sectors, causing corruption for large offsets - incorrect normalization of page or block granularity ranges - insufficient error handling - incorrect synchronization as extents can be modified while they are in use This patch replace all three data with a single unified rbtree structure tracking all extents, as well as their in-memory state, although we still need to instance for read-only and read-write extent due to the arcane client side COW feature in the block layouts spec. To fix the problem of extent possibly being modified while in use we make sure to return a copy of the extent for use in the write path - the extent can only be invalidated by a layout recall or return which has to wait until the I/O operations finished due to refcounts on the layout segment. The new extent tree work similar to the schemes used by block based filesystems like XFS or ext4. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2014-09-10 23:23:34 +08:00
if (!ext_tree_lookup(bl, isect, &be, true)) {
header->pnfs_error = -EINVAL;
pnfsblock: bl_write_pagelist Note: When upper layer's read/write request cannot be fulfilled, the block layout driver shouldn't silently mark the page as error. It should do what can be done and leave the rest to the upper layer. To do so, we should set rdata/wdata->res.count properly. When upper layer re-send the read/write request to finish the rest part of the request, pgbase is the position where we should start at. [pnfsblock: bl_write_pagelist support functions] [pnfsblock: bl_write_pagelist adjust for missing PG_USE_PNFS] Signed-off-by: Fred Isaman <iisaman@citi.umich.edu> [pnfsblock: handle errors when read or write pagelist.] Signed-off-by: Zhang Jingwang <yyalone@gmail.com> [pnfs-block: use new write_pagelist api] Signed-off-by: Benny Halevy <bhalevy@panasas.com> Signed-off-by: Benny Halevy <bhalevy@tonian.com> Signed-off-by: Jim Rees <rees@umich.edu> [SQUASHME: pnfsblock: mds_offset is set in the generic layer] Signed-off-by: Boaz Harrosh <bharrosh@panasas.com> Signed-off-by: Benny Halevy <bhalevy@tonian.com> [pnfsblock: mark IO error with NFS_LAYOUT_{RW|RO}_FAILED] Signed-off-by: Peng Tao <peng_tao@emc.com> [pnfsblock: SQUASHME: adjust to API change] Signed-off-by: Fred Isaman <iisaman@citi.umich.edu> [pnfsblock: fixup blksize alignment in bl_setup_layoutcommit] Signed-off-by: Benny Halevy <bhalevy@panasas.com> Signed-off-by: Benny Halevy <bhalevy@tonian.com> [pnfsblock: bl_write_pagelist adjust for missing PG_USE_PNFS] Signed-off-by: Fred Isaman <iisaman@citi.umich.edu> [pnfsblock: handle errors when read or write pagelist.] Signed-off-by: Zhang Jingwang <yyalone@gmail.com> [pnfs-block: use new write_pagelist api] Signed-off-by: Benny Halevy <bhalevy@panasas.com> Signed-off-by: Benny Halevy <bhalevy@tonian.com> Signed-off-by: Jim Rees <rees@umich.edu> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2011-07-31 08:52:54 +08:00
goto out;
}
pnfs/blocklayout: rewrite extent tracking Currently the block layout driver tracks extents in three separate data structures: - the two list of pnfs_block_extent structures returned by the server - the list of sectors that were in invalid state but have been written to - a list of pnfs_block_short_extent structures for LAYOUTCOMMIT All of these share the property that they are not only highly inefficient data structures, but also that operations on them are even more inefficient than nessecary. In addition there are various implementation defects like: - using an int to track sectors, causing corruption for large offsets - incorrect normalization of page or block granularity ranges - insufficient error handling - incorrect synchronization as extents can be modified while they are in use This patch replace all three data with a single unified rbtree structure tracking all extents, as well as their in-memory state, although we still need to instance for read-only and read-write extent due to the arcane client side COW feature in the block layouts spec. To fix the problem of extent possibly being modified while in use we make sure to return a copy of the extent for use in the write path - the extent can only be invalidated by a layout recall or return which has to wait until the I/O operations finished due to refcounts on the layout segment. The new extent tree work similar to the schemes used by block based filesystems like XFS or ext4. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2014-09-10 23:23:34 +08:00
extent_length = be.be_length - (isect - be.be_f_offset);
}
mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macros PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time ago with promise that one day it will be possible to implement page cache with bigger chunks than PAGE_SIZE. This promise never materialized. And unlikely will. We have many places where PAGE_CACHE_SIZE assumed to be equal to PAGE_SIZE. And it's constant source of confusion on whether PAGE_CACHE_* or PAGE_* constant should be used in a particular case, especially on the border between fs and mm. Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much breakage to be doable. Let's stop pretending that pages in page cache are special. They are not. The changes are pretty straight-forward: - <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN}; - page_cache_get() -> get_page(); - page_cache_release() -> put_page(); This patch contains automated changes generated with coccinelle using script below. For some reason, coccinelle doesn't patch header files. I've called spatch for them manually. The only adjustment after coccinelle is revert of changes to PAGE_CAHCE_ALIGN definition: we are going to drop it later. There are few places in the code where coccinelle didn't reach. I'll fix them manually in a separate patch. Comments and documentation also will be addressed with the separate patch. virtual patch @@ expression E; @@ - E << (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ expression E; @@ - E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ @@ - PAGE_CACHE_SHIFT + PAGE_SHIFT @@ @@ - PAGE_CACHE_SIZE + PAGE_SIZE @@ @@ - PAGE_CACHE_MASK + PAGE_MASK @@ expression E; @@ - PAGE_CACHE_ALIGN(E) + PAGE_ALIGN(E) @@ expression E; @@ - page_cache_get(E) + get_page(E) @@ expression E; @@ - page_cache_release(E) + put_page(E) Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-01 20:29:47 +08:00
pg_len = PAGE_SIZE;
bio = do_add_page_to_bio(bio, header->page_array.npages - i,
WRITE, isect, pages[i], &map, &be,
bl_end_io_write, par,
0, &pg_len);
if (IS_ERR(bio)) {
header->pnfs_error = PTR_ERR(bio);
bio = NULL;
goto out;
pnfsblock: bl_write_pagelist Note: When upper layer's read/write request cannot be fulfilled, the block layout driver shouldn't silently mark the page as error. It should do what can be done and leave the rest to the upper layer. To do so, we should set rdata/wdata->res.count properly. When upper layer re-send the read/write request to finish the rest part of the request, pgbase is the position where we should start at. [pnfsblock: bl_write_pagelist support functions] [pnfsblock: bl_write_pagelist adjust for missing PG_USE_PNFS] Signed-off-by: Fred Isaman <iisaman@citi.umich.edu> [pnfsblock: handle errors when read or write pagelist.] Signed-off-by: Zhang Jingwang <yyalone@gmail.com> [pnfs-block: use new write_pagelist api] Signed-off-by: Benny Halevy <bhalevy@panasas.com> Signed-off-by: Benny Halevy <bhalevy@tonian.com> Signed-off-by: Jim Rees <rees@umich.edu> [SQUASHME: pnfsblock: mds_offset is set in the generic layer] Signed-off-by: Boaz Harrosh <bharrosh@panasas.com> Signed-off-by: Benny Halevy <bhalevy@tonian.com> [pnfsblock: mark IO error with NFS_LAYOUT_{RW|RO}_FAILED] Signed-off-by: Peng Tao <peng_tao@emc.com> [pnfsblock: SQUASHME: adjust to API change] Signed-off-by: Fred Isaman <iisaman@citi.umich.edu> [pnfsblock: fixup blksize alignment in bl_setup_layoutcommit] Signed-off-by: Benny Halevy <bhalevy@panasas.com> Signed-off-by: Benny Halevy <bhalevy@tonian.com> [pnfsblock: bl_write_pagelist adjust for missing PG_USE_PNFS] Signed-off-by: Fred Isaman <iisaman@citi.umich.edu> [pnfsblock: handle errors when read or write pagelist.] Signed-off-by: Zhang Jingwang <yyalone@gmail.com> [pnfs-block: use new write_pagelist api] Signed-off-by: Benny Halevy <bhalevy@panasas.com> Signed-off-by: Benny Halevy <bhalevy@tonian.com> Signed-off-by: Jim Rees <rees@umich.edu> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2011-07-31 08:52:54 +08:00
}
offset += pg_len;
count -= pg_len;
isect += (pg_len >> SECTOR_SHIFT);
extent_length -= (pg_len >> SECTOR_SHIFT);
pnfsblock: bl_write_pagelist Note: When upper layer's read/write request cannot be fulfilled, the block layout driver shouldn't silently mark the page as error. It should do what can be done and leave the rest to the upper layer. To do so, we should set rdata/wdata->res.count properly. When upper layer re-send the read/write request to finish the rest part of the request, pgbase is the position where we should start at. [pnfsblock: bl_write_pagelist support functions] [pnfsblock: bl_write_pagelist adjust for missing PG_USE_PNFS] Signed-off-by: Fred Isaman <iisaman@citi.umich.edu> [pnfsblock: handle errors when read or write pagelist.] Signed-off-by: Zhang Jingwang <yyalone@gmail.com> [pnfs-block: use new write_pagelist api] Signed-off-by: Benny Halevy <bhalevy@panasas.com> Signed-off-by: Benny Halevy <bhalevy@tonian.com> Signed-off-by: Jim Rees <rees@umich.edu> [SQUASHME: pnfsblock: mds_offset is set in the generic layer] Signed-off-by: Boaz Harrosh <bharrosh@panasas.com> Signed-off-by: Benny Halevy <bhalevy@tonian.com> [pnfsblock: mark IO error with NFS_LAYOUT_{RW|RO}_FAILED] Signed-off-by: Peng Tao <peng_tao@emc.com> [pnfsblock: SQUASHME: adjust to API change] Signed-off-by: Fred Isaman <iisaman@citi.umich.edu> [pnfsblock: fixup blksize alignment in bl_setup_layoutcommit] Signed-off-by: Benny Halevy <bhalevy@panasas.com> Signed-off-by: Benny Halevy <bhalevy@tonian.com> [pnfsblock: bl_write_pagelist adjust for missing PG_USE_PNFS] Signed-off-by: Fred Isaman <iisaman@citi.umich.edu> [pnfsblock: handle errors when read or write pagelist.] Signed-off-by: Zhang Jingwang <yyalone@gmail.com> [pnfs-block: use new write_pagelist api] Signed-off-by: Benny Halevy <bhalevy@panasas.com> Signed-off-by: Benny Halevy <bhalevy@tonian.com> Signed-off-by: Jim Rees <rees@umich.edu> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2011-07-31 08:52:54 +08:00
}
header->res.count = header->args.count;
pnfsblock: bl_write_pagelist Note: When upper layer's read/write request cannot be fulfilled, the block layout driver shouldn't silently mark the page as error. It should do what can be done and leave the rest to the upper layer. To do so, we should set rdata/wdata->res.count properly. When upper layer re-send the read/write request to finish the rest part of the request, pgbase is the position where we should start at. [pnfsblock: bl_write_pagelist support functions] [pnfsblock: bl_write_pagelist adjust for missing PG_USE_PNFS] Signed-off-by: Fred Isaman <iisaman@citi.umich.edu> [pnfsblock: handle errors when read or write pagelist.] Signed-off-by: Zhang Jingwang <yyalone@gmail.com> [pnfs-block: use new write_pagelist api] Signed-off-by: Benny Halevy <bhalevy@panasas.com> Signed-off-by: Benny Halevy <bhalevy@tonian.com> Signed-off-by: Jim Rees <rees@umich.edu> [SQUASHME: pnfsblock: mds_offset is set in the generic layer] Signed-off-by: Boaz Harrosh <bharrosh@panasas.com> Signed-off-by: Benny Halevy <bhalevy@tonian.com> [pnfsblock: mark IO error with NFS_LAYOUT_{RW|RO}_FAILED] Signed-off-by: Peng Tao <peng_tao@emc.com> [pnfsblock: SQUASHME: adjust to API change] Signed-off-by: Fred Isaman <iisaman@citi.umich.edu> [pnfsblock: fixup blksize alignment in bl_setup_layoutcommit] Signed-off-by: Benny Halevy <bhalevy@panasas.com> Signed-off-by: Benny Halevy <bhalevy@tonian.com> [pnfsblock: bl_write_pagelist adjust for missing PG_USE_PNFS] Signed-off-by: Fred Isaman <iisaman@citi.umich.edu> [pnfsblock: handle errors when read or write pagelist.] Signed-off-by: Zhang Jingwang <yyalone@gmail.com> [pnfs-block: use new write_pagelist api] Signed-off-by: Benny Halevy <bhalevy@panasas.com> Signed-off-by: Benny Halevy <bhalevy@tonian.com> Signed-off-by: Jim Rees <rees@umich.edu> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2011-07-31 08:52:54 +08:00
out:
bl_submit_bio(bio);
blk_finish_plug(&plug);
pnfsblock: bl_write_pagelist Note: When upper layer's read/write request cannot be fulfilled, the block layout driver shouldn't silently mark the page as error. It should do what can be done and leave the rest to the upper layer. To do so, we should set rdata/wdata->res.count properly. When upper layer re-send the read/write request to finish the rest part of the request, pgbase is the position where we should start at. [pnfsblock: bl_write_pagelist support functions] [pnfsblock: bl_write_pagelist adjust for missing PG_USE_PNFS] Signed-off-by: Fred Isaman <iisaman@citi.umich.edu> [pnfsblock: handle errors when read or write pagelist.] Signed-off-by: Zhang Jingwang <yyalone@gmail.com> [pnfs-block: use new write_pagelist api] Signed-off-by: Benny Halevy <bhalevy@panasas.com> Signed-off-by: Benny Halevy <bhalevy@tonian.com> Signed-off-by: Jim Rees <rees@umich.edu> [SQUASHME: pnfsblock: mds_offset is set in the generic layer] Signed-off-by: Boaz Harrosh <bharrosh@panasas.com> Signed-off-by: Benny Halevy <bhalevy@tonian.com> [pnfsblock: mark IO error with NFS_LAYOUT_{RW|RO}_FAILED] Signed-off-by: Peng Tao <peng_tao@emc.com> [pnfsblock: SQUASHME: adjust to API change] Signed-off-by: Fred Isaman <iisaman@citi.umich.edu> [pnfsblock: fixup blksize alignment in bl_setup_layoutcommit] Signed-off-by: Benny Halevy <bhalevy@panasas.com> Signed-off-by: Benny Halevy <bhalevy@tonian.com> [pnfsblock: bl_write_pagelist adjust for missing PG_USE_PNFS] Signed-off-by: Fred Isaman <iisaman@citi.umich.edu> [pnfsblock: handle errors when read or write pagelist.] Signed-off-by: Zhang Jingwang <yyalone@gmail.com> [pnfs-block: use new write_pagelist api] Signed-off-by: Benny Halevy <bhalevy@panasas.com> Signed-off-by: Benny Halevy <bhalevy@tonian.com> Signed-off-by: Jim Rees <rees@umich.edu> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2011-07-31 08:52:54 +08:00
put_parallel(par);
return PNFS_ATTEMPTED;
}
static void bl_free_layout_hdr(struct pnfs_layout_hdr *lo)
{
struct pnfs_block_layout *bl = BLK_LO2EXT(lo);
pnfs/blocklayout: rewrite extent tracking Currently the block layout driver tracks extents in three separate data structures: - the two list of pnfs_block_extent structures returned by the server - the list of sectors that were in invalid state but have been written to - a list of pnfs_block_short_extent structures for LAYOUTCOMMIT All of these share the property that they are not only highly inefficient data structures, but also that operations on them are even more inefficient than nessecary. In addition there are various implementation defects like: - using an int to track sectors, causing corruption for large offsets - incorrect normalization of page or block granularity ranges - insufficient error handling - incorrect synchronization as extents can be modified while they are in use This patch replace all three data with a single unified rbtree structure tracking all extents, as well as their in-memory state, although we still need to instance for read-only and read-write extent due to the arcane client side COW feature in the block layouts spec. To fix the problem of extent possibly being modified while in use we make sure to return a copy of the extent for use in the write path - the extent can only be invalidated by a layout recall or return which has to wait until the I/O operations finished due to refcounts on the layout segment. The new extent tree work similar to the schemes used by block based filesystems like XFS or ext4. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2014-09-10 23:23:34 +08:00
int err;
dprintk("%s enter\n", __func__);
pnfs/blocklayout: rewrite extent tracking Currently the block layout driver tracks extents in three separate data structures: - the two list of pnfs_block_extent structures returned by the server - the list of sectors that were in invalid state but have been written to - a list of pnfs_block_short_extent structures for LAYOUTCOMMIT All of these share the property that they are not only highly inefficient data structures, but also that operations on them are even more inefficient than nessecary. In addition there are various implementation defects like: - using an int to track sectors, causing corruption for large offsets - incorrect normalization of page or block granularity ranges - insufficient error handling - incorrect synchronization as extents can be modified while they are in use This patch replace all three data with a single unified rbtree structure tracking all extents, as well as their in-memory state, although we still need to instance for read-only and read-write extent due to the arcane client side COW feature in the block layouts spec. To fix the problem of extent possibly being modified while in use we make sure to return a copy of the extent for use in the write path - the extent can only be invalidated by a layout recall or return which has to wait until the I/O operations finished due to refcounts on the layout segment. The new extent tree work similar to the schemes used by block based filesystems like XFS or ext4. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2014-09-10 23:23:34 +08:00
err = ext_tree_remove(bl, true, 0, LLONG_MAX);
WARN_ON(err);
kfree(bl);
}
static struct pnfs_layout_hdr *__bl_alloc_layout_hdr(struct inode *inode,
gfp_t gfp_flags, bool is_scsi_layout)
{
struct pnfs_block_layout *bl;
dprintk("%s enter\n", __func__);
bl = kzalloc(sizeof(*bl), gfp_flags);
if (!bl)
return NULL;
pnfs/blocklayout: rewrite extent tracking Currently the block layout driver tracks extents in three separate data structures: - the two list of pnfs_block_extent structures returned by the server - the list of sectors that were in invalid state but have been written to - a list of pnfs_block_short_extent structures for LAYOUTCOMMIT All of these share the property that they are not only highly inefficient data structures, but also that operations on them are even more inefficient than nessecary. In addition there are various implementation defects like: - using an int to track sectors, causing corruption for large offsets - incorrect normalization of page or block granularity ranges - insufficient error handling - incorrect synchronization as extents can be modified while they are in use This patch replace all three data with a single unified rbtree structure tracking all extents, as well as their in-memory state, although we still need to instance for read-only and read-write extent due to the arcane client side COW feature in the block layouts spec. To fix the problem of extent possibly being modified while in use we make sure to return a copy of the extent for use in the write path - the extent can only be invalidated by a layout recall or return which has to wait until the I/O operations finished due to refcounts on the layout segment. The new extent tree work similar to the schemes used by block based filesystems like XFS or ext4. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2014-09-10 23:23:34 +08:00
bl->bl_ext_rw = RB_ROOT;
bl->bl_ext_ro = RB_ROOT;
spin_lock_init(&bl->bl_ext_lock);
pnfs/blocklayout: rewrite extent tracking Currently the block layout driver tracks extents in three separate data structures: - the two list of pnfs_block_extent structures returned by the server - the list of sectors that were in invalid state but have been written to - a list of pnfs_block_short_extent structures for LAYOUTCOMMIT All of these share the property that they are not only highly inefficient data structures, but also that operations on them are even more inefficient than nessecary. In addition there are various implementation defects like: - using an int to track sectors, causing corruption for large offsets - incorrect normalization of page or block granularity ranges - insufficient error handling - incorrect synchronization as extents can be modified while they are in use This patch replace all three data with a single unified rbtree structure tracking all extents, as well as their in-memory state, although we still need to instance for read-only and read-write extent due to the arcane client side COW feature in the block layouts spec. To fix the problem of extent possibly being modified while in use we make sure to return a copy of the extent for use in the write path - the extent can only be invalidated by a layout recall or return which has to wait until the I/O operations finished due to refcounts on the layout segment. The new extent tree work similar to the schemes used by block based filesystems like XFS or ext4. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2014-09-10 23:23:34 +08:00
bl->bl_scsi_layout = is_scsi_layout;
return &bl->bl_layout;
}
static struct pnfs_layout_hdr *bl_alloc_layout_hdr(struct inode *inode,
gfp_t gfp_flags)
{
return __bl_alloc_layout_hdr(inode, gfp_flags, false);
}
static struct pnfs_layout_hdr *sl_alloc_layout_hdr(struct inode *inode,
gfp_t gfp_flags)
{
return __bl_alloc_layout_hdr(inode, gfp_flags, true);
}
static void bl_free_lseg(struct pnfs_layout_segment *lseg)
{
dprintk("%s enter\n", __func__);
kfree(lseg);
}
/* Tracks info needed to ensure extents in layout obey constraints of spec */
struct layout_verification {
u32 mode; /* R or RW */
u64 start; /* Expected start of next non-COW extent */
u64 inval; /* Start of INVAL coverage */
u64 cowread; /* End of COW read coverage */
};
/* Verify the extent meets the layout requirements of the pnfs-block draft,
* section 2.3.1.
*/
static int verify_extent(struct pnfs_block_extent *be,
struct layout_verification *lv)
{
if (lv->mode == IOMODE_READ) {
if (be->be_state == PNFS_BLOCK_READWRITE_DATA ||
be->be_state == PNFS_BLOCK_INVALID_DATA)
return -EIO;
if (be->be_f_offset != lv->start)
return -EIO;
lv->start += be->be_length;
return 0;
}
/* lv->mode == IOMODE_RW */
if (be->be_state == PNFS_BLOCK_READWRITE_DATA) {
if (be->be_f_offset != lv->start)
return -EIO;
if (lv->cowread > lv->start)
return -EIO;
lv->start += be->be_length;
lv->inval = lv->start;
return 0;
} else if (be->be_state == PNFS_BLOCK_INVALID_DATA) {
if (be->be_f_offset != lv->start)
return -EIO;
lv->start += be->be_length;
return 0;
} else if (be->be_state == PNFS_BLOCK_READ_DATA) {
if (be->be_f_offset > lv->start)
return -EIO;
if (be->be_f_offset < lv->inval)
return -EIO;
if (be->be_f_offset < lv->cowread)
return -EIO;
/* It looks like you might want to min this with lv->start,
* but you really don't.
*/
lv->inval = lv->inval + be->be_length;
lv->cowread = be->be_f_offset + be->be_length;
return 0;
} else
return -EIO;
}
static int decode_sector_number(__be32 **rp, sector_t *sp)
{
uint64_t s;
*rp = xdr_decode_hyper(*rp, &s);
if (s & 0x1ff) {
printk(KERN_WARNING "NFS: %s: sector not aligned\n", __func__);
return -1;
}
*sp = s >> SECTOR_SHIFT;
return 0;
}
static int
bl_alloc_extent(struct xdr_stream *xdr, struct pnfs_layout_hdr *lo,
struct layout_verification *lv, struct list_head *extents,
gfp_t gfp_mask)
{
struct pnfs_block_extent *be;
struct nfs4_deviceid id;
int error;
__be32 *p;
p = xdr_inline_decode(xdr, 28 + NFS4_DEVICEID4_SIZE);
if (!p)
return -EIO;
be = kzalloc(sizeof(*be), GFP_NOFS);
if (!be)
return -ENOMEM;
memcpy(&id, p, NFS4_DEVICEID4_SIZE);
p += XDR_QUADLEN(NFS4_DEVICEID4_SIZE);
error = -EIO;
be->be_device = nfs4_find_get_deviceid(NFS_SERVER(lo->plh_inode), &id,
lo->plh_lc_cred, gfp_mask);
if (!be->be_device)
goto out_free_be;
/*
* The next three values are read in as bytes, but stored in the
* extent structure in 512-byte granularity.
*/
if (decode_sector_number(&p, &be->be_f_offset) < 0)
goto out_put_deviceid;
if (decode_sector_number(&p, &be->be_length) < 0)
goto out_put_deviceid;
if (decode_sector_number(&p, &be->be_v_offset) < 0)
goto out_put_deviceid;
be->be_state = be32_to_cpup(p++);
error = verify_extent(be, lv);
if (error) {
dprintk("%s: extent verification failed\n", __func__);
goto out_put_deviceid;
}
list_add_tail(&be->be_list, extents);
return 0;
out_put_deviceid:
nfs4_put_deviceid_node(be->be_device);
out_free_be:
kfree(be);
return error;
}
static struct pnfs_layout_segment *
bl_alloc_lseg(struct pnfs_layout_hdr *lo, struct nfs4_layoutget_res *lgr,
gfp_t gfp_mask)
{
struct layout_verification lv = {
.mode = lgr->range.iomode,
.start = lgr->range.offset >> SECTOR_SHIFT,
.inval = lgr->range.offset >> SECTOR_SHIFT,
.cowread = lgr->range.offset >> SECTOR_SHIFT,
};
struct pnfs_block_layout *bl = BLK_LO2EXT(lo);
struct pnfs_layout_segment *lseg;
struct xdr_buf buf;
struct xdr_stream xdr;
struct page *scratch;
int status, i;
uint32_t count;
__be32 *p;
LIST_HEAD(extents);
dprintk("---> %s\n", __func__);
lseg = kzalloc(sizeof(*lseg), gfp_mask);
if (!lseg)
return ERR_PTR(-ENOMEM);
status = -ENOMEM;
scratch = alloc_page(gfp_mask);
if (!scratch)
goto out;
xdr_init_decode_pages(&xdr, &buf,
lgr->layoutp->pages, lgr->layoutp->len);
xdr_set_scratch_buffer(&xdr, page_address(scratch), PAGE_SIZE);
status = -EIO;
p = xdr_inline_decode(&xdr, 4);
if (unlikely(!p))
goto out_free_scratch;
count = be32_to_cpup(p++);
dprintk("%s: number of extents %d\n", __func__, count);
/*
* Decode individual extents, putting them in temporary staging area
* until whole layout is decoded to make error recovery easier.
*/
for (i = 0; i < count; i++) {
status = bl_alloc_extent(&xdr, lo, &lv, &extents, gfp_mask);
if (status)
goto process_extents;
}
if (lgr->range.offset + lgr->range.length !=
lv.start << SECTOR_SHIFT) {
dprintk("%s Final length mismatch\n", __func__);
status = -EIO;
goto process_extents;
}
if (lv.start < lv.cowread) {
dprintk("%s Final uncovered COW extent\n", __func__);
status = -EIO;
}
process_extents:
while (!list_empty(&extents)) {
struct pnfs_block_extent *be =
list_first_entry(&extents, struct pnfs_block_extent,
be_list);
list_del(&be->be_list);
if (!status)
status = ext_tree_insert(bl, be);
if (status) {
nfs4_put_deviceid_node(be->be_device);
kfree(be);
}
}
out_free_scratch:
__free_page(scratch);
out:
dprintk("%s returns %d\n", __func__, status);
if (status) {
kfree(lseg);
return ERR_PTR(status);
}
return lseg;
}
static void
bl_return_range(struct pnfs_layout_hdr *lo,
struct pnfs_layout_range *range)
{
struct pnfs_block_layout *bl = BLK_LO2EXT(lo);
sector_t offset = range->offset >> SECTOR_SHIFT, end;
if (range->offset % 8) {
dprintk("%s: offset %lld not block size aligned\n",
__func__, range->offset);
return;
}
if (range->length != NFS4_MAX_UINT64) {
if (range->length % 8) {
dprintk("%s: length %lld not block size aligned\n",
__func__, range->length);
return;
}
end = offset + (range->length >> SECTOR_SHIFT);
} else {
end = round_down(NFS4_MAX_UINT64, PAGE_SIZE);
}
ext_tree_remove(bl, range->iomode & IOMODE_RW, offset, end);
}
static int
bl_prepare_layoutcommit(struct nfs4_layoutcommit_args *arg)
{
return ext_tree_prepare_commit(arg);
}
static void
bl_cleanup_layoutcommit(struct nfs4_layoutcommit_data *lcdata)
{
ext_tree_mark_committed(&lcdata->args, lcdata->res.status);
}
static int
bl_set_layoutdriver(struct nfs_server *server, const struct nfs_fh *fh)
{
dprintk("%s enter\n", __func__);
if (server->pnfs_blksize == 0) {
dprintk("%s Server did not return blksize\n", __func__);
return -EINVAL;
}
if (server->pnfs_blksize > PAGE_SIZE) {
printk(KERN_ERR "%s: pNFS blksize %d not supported.\n",
__func__, server->pnfs_blksize);
return -EINVAL;
}
return 0;
}
static bool
is_aligned_req(struct nfs_pageio_descriptor *pgio,
struct nfs_page *req, unsigned int alignment, bool is_write)
{
/*
* Always accept buffered writes, higher layers take care of the
* right alignment.
*/
if (pgio->pg_dreq == NULL)
return true;
if (!IS_ALIGNED(req->wb_offset, alignment))
return false;
if (IS_ALIGNED(req->wb_bytes, alignment))
return true;
if (is_write &&
(req_offset(req) + req->wb_bytes == i_size_read(pgio->pg_inode))) {
/*
* If the write goes up to the inode size, just write
* the full page. Data past the inode size is
* guaranteed to be zeroed by the higher level client
* code, and this behaviour is mandated by RFC 5663
* section 2.3.2.
*/
return true;
}
return false;
}
static void
bl_pg_init_read(struct nfs_pageio_descriptor *pgio, struct nfs_page *req)
{
if (!is_aligned_req(pgio, req, SECTOR_SIZE, false)) {
nfs_pageio_reset_read_mds(pgio);
return;
}
pnfs_generic_pg_init_read(pgio, req);
}
/*
* Return 0 if @req cannot be coalesced into @pgio, otherwise return the number
* of bytes (maximum @req->wb_bytes) that can be coalesced.
*/
static size_t
bl_pg_test_read(struct nfs_pageio_descriptor *pgio, struct nfs_page *prev,
struct nfs_page *req)
{
if (!is_aligned_req(pgio, req, SECTOR_SIZE, false))
return 0;
return pnfs_generic_pg_test(pgio, prev, req);
}
/*
* Return the number of contiguous bytes for a given inode
* starting at page frame idx.
*/
static u64 pnfs_num_cont_bytes(struct inode *inode, pgoff_t idx)
{
struct address_space *mapping = inode->i_mapping;
pgoff_t end;
/* Optimize common case that writes from 0 to end of file */
mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macros PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time ago with promise that one day it will be possible to implement page cache with bigger chunks than PAGE_SIZE. This promise never materialized. And unlikely will. We have many places where PAGE_CACHE_SIZE assumed to be equal to PAGE_SIZE. And it's constant source of confusion on whether PAGE_CACHE_* or PAGE_* constant should be used in a particular case, especially on the border between fs and mm. Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much breakage to be doable. Let's stop pretending that pages in page cache are special. They are not. The changes are pretty straight-forward: - <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN}; - page_cache_get() -> get_page(); - page_cache_release() -> put_page(); This patch contains automated changes generated with coccinelle using script below. For some reason, coccinelle doesn't patch header files. I've called spatch for them manually. The only adjustment after coccinelle is revert of changes to PAGE_CAHCE_ALIGN definition: we are going to drop it later. There are few places in the code where coccinelle didn't reach. I'll fix them manually in a separate patch. Comments and documentation also will be addressed with the separate patch. virtual patch @@ expression E; @@ - E << (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ expression E; @@ - E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ @@ - PAGE_CACHE_SHIFT + PAGE_SHIFT @@ @@ - PAGE_CACHE_SIZE + PAGE_SIZE @@ @@ - PAGE_CACHE_MASK + PAGE_MASK @@ expression E; @@ - PAGE_CACHE_ALIGN(E) + PAGE_ALIGN(E) @@ expression E; @@ - page_cache_get(E) + get_page(E) @@ expression E; @@ - page_cache_release(E) + put_page(E) Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-01 20:29:47 +08:00
end = DIV_ROUND_UP(i_size_read(inode), PAGE_SIZE);
if (end != inode->i_mapping->nrpages) {
rcu_read_lock();
mm: filemap: move radix tree hole searching here The radix tree hole searching code is only used for page cache, for example the readahead code trying to get a a picture of the area surrounding a fault. It sufficed to rely on the radix tree definition of holes, which is "empty tree slot". But this is about to change, though, as shadow page descriptors will be stored in the page cache after the actual pages get evicted from memory. Move the functions over to mm/filemap.c and make them native page cache operations, where they can later be adapted to handle the new definition of "page cache hole". Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Reviewed-by: Rik van Riel <riel@redhat.com> Reviewed-by: Minchan Kim <minchan@kernel.org> Acked-by: Mel Gorman <mgorman@suse.de> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Bob Liu <bob.liu@oracle.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Dave Chinner <david@fromorbit.com> Cc: Greg Thelen <gthelen@google.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jan Kara <jack@suse.cz> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Luigi Semenzato <semenzato@google.com> Cc: Metin Doslu <metin@citusdata.com> Cc: Michel Lespinasse <walken@google.com> Cc: Ozgun Erdogan <ozgun@citusdata.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Roman Gushchin <klamm@yandex-team.ru> Cc: Ryan Mallon <rmallon@gmail.com> Cc: Tejun Heo <tj@kernel.org> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-04 05:47:44 +08:00
end = page_cache_next_hole(mapping, idx + 1, ULONG_MAX);
rcu_read_unlock();
}
if (!end)
mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macros PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time ago with promise that one day it will be possible to implement page cache with bigger chunks than PAGE_SIZE. This promise never materialized. And unlikely will. We have many places where PAGE_CACHE_SIZE assumed to be equal to PAGE_SIZE. And it's constant source of confusion on whether PAGE_CACHE_* or PAGE_* constant should be used in a particular case, especially on the border between fs and mm. Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much breakage to be doable. Let's stop pretending that pages in page cache are special. They are not. The changes are pretty straight-forward: - <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN}; - page_cache_get() -> get_page(); - page_cache_release() -> put_page(); This patch contains automated changes generated with coccinelle using script below. For some reason, coccinelle doesn't patch header files. I've called spatch for them manually. The only adjustment after coccinelle is revert of changes to PAGE_CAHCE_ALIGN definition: we are going to drop it later. There are few places in the code where coccinelle didn't reach. I'll fix them manually in a separate patch. Comments and documentation also will be addressed with the separate patch. virtual patch @@ expression E; @@ - E << (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ expression E; @@ - E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ @@ - PAGE_CACHE_SHIFT + PAGE_SHIFT @@ @@ - PAGE_CACHE_SIZE + PAGE_SIZE @@ @@ - PAGE_CACHE_MASK + PAGE_MASK @@ expression E; @@ - PAGE_CACHE_ALIGN(E) + PAGE_ALIGN(E) @@ expression E; @@ - page_cache_get(E) + get_page(E) @@ expression E; @@ - page_cache_release(E) + put_page(E) Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-01 20:29:47 +08:00
return i_size_read(inode) - (idx << PAGE_SHIFT);
else
mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macros PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time ago with promise that one day it will be possible to implement page cache with bigger chunks than PAGE_SIZE. This promise never materialized. And unlikely will. We have many places where PAGE_CACHE_SIZE assumed to be equal to PAGE_SIZE. And it's constant source of confusion on whether PAGE_CACHE_* or PAGE_* constant should be used in a particular case, especially on the border between fs and mm. Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much breakage to be doable. Let's stop pretending that pages in page cache are special. They are not. The changes are pretty straight-forward: - <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN}; - page_cache_get() -> get_page(); - page_cache_release() -> put_page(); This patch contains automated changes generated with coccinelle using script below. For some reason, coccinelle doesn't patch header files. I've called spatch for them manually. The only adjustment after coccinelle is revert of changes to PAGE_CAHCE_ALIGN definition: we are going to drop it later. There are few places in the code where coccinelle didn't reach. I'll fix them manually in a separate patch. Comments and documentation also will be addressed with the separate patch. virtual patch @@ expression E; @@ - E << (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ expression E; @@ - E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ @@ - PAGE_CACHE_SHIFT + PAGE_SHIFT @@ @@ - PAGE_CACHE_SIZE + PAGE_SIZE @@ @@ - PAGE_CACHE_MASK + PAGE_MASK @@ expression E; @@ - PAGE_CACHE_ALIGN(E) + PAGE_ALIGN(E) @@ expression E; @@ - page_cache_get(E) + get_page(E) @@ expression E; @@ - page_cache_release(E) + put_page(E) Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-01 20:29:47 +08:00
return (end - idx) << PAGE_SHIFT;
}
static void
bl_pg_init_write(struct nfs_pageio_descriptor *pgio, struct nfs_page *req)
{
u64 wb_size;
if (!is_aligned_req(pgio, req, PAGE_SIZE, true)) {
nfs_pageio_reset_write_mds(pgio);
return;
}
if (pgio->pg_dreq == NULL)
wb_size = pnfs_num_cont_bytes(pgio->pg_inode,
req->wb_index);
else
wb_size = nfs_dreq_bytes_left(pgio->pg_dreq);
pnfs_generic_pg_init_write(pgio, req, wb_size);
}
/*
* Return 0 if @req cannot be coalesced into @pgio, otherwise return the number
* of bytes (maximum @req->wb_bytes) that can be coalesced.
*/
static size_t
bl_pg_test_write(struct nfs_pageio_descriptor *pgio, struct nfs_page *prev,
struct nfs_page *req)
{
if (!is_aligned_req(pgio, req, PAGE_SIZE, true))
return 0;
return pnfs_generic_pg_test(pgio, prev, req);
}
static const struct nfs_pageio_ops bl_pg_read_ops = {
.pg_init = bl_pg_init_read,
.pg_test = bl_pg_test_read,
.pg_doio = pnfs_generic_pg_readpages,
.pg_cleanup = pnfs_generic_pg_cleanup,
};
static const struct nfs_pageio_ops bl_pg_write_ops = {
.pg_init = bl_pg_init_write,
.pg_test = bl_pg_test_write,
.pg_doio = pnfs_generic_pg_writepages,
.pg_cleanup = pnfs_generic_pg_cleanup,
};
static struct pnfs_layoutdriver_type blocklayout_type = {
.id = LAYOUT_BLOCK_VOLUME,
.name = "LAYOUT_BLOCK_VOLUME",
umount oops when remove blocklayoutdriver first now pnfs client uses block layout, maybe we can remove blocklayoutdriver first. if we umount later, it can cause oops in unset_pnfs_layoutdriver. because nfss->pnfs_curr_ld->clear_layoutdriver is invalid. reproduce it: modprobe blocklayoutdriver mount -t nfs4 -o minorversion=1 pnfsip:/ /mnt/ rmmod blocklayoutdriver umount /mnt then you can see following CPU 0 Pid: 17023, comm: umount.nfs4 Tainted: GF O 3.7.0-rc6-pnfs #1 VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform RIP: 0010:[<ffffffffa04cfe6d>] [<ffffffffa04cfe6d>] unset_pnfs_layoutdriver+0x1d/0x70 [nfsv4] RSP: 0018:ffff8800022d9e48 EFLAGS: 00010286 RAX: ffffffffa04a1b00 RBX: ffff88000b013800 RCX: 0000000000000001 RDX: ffffffff81ae8ee0 RSI: ffff880001ee94b8 RDI: ffff88000b013800 RBP: ffff8800022d9e58 R08: 0000000000000001 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: ffff880001ee9400 R13: ffff8800105978c0 R14: 00007fff25846c08 R15: 0000000001bba550 FS: 00007f45ae7f0700(0000) GS:ffff880012c00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: ffffffffa04a1b38 CR3: 0000000002c0c000 CR4: 00000000000006f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process umount.nfs4 (pid: 17023, threadinfo ffff8800022d8000, task ffff880006e48aa0) Stack: ffff8800105978c0 ffff88000b013800 ffff8800022d9e78 ffffffffa04cd0ce ffff8800022d9e78 ffff88000b013800 ffff8800022d9ea8 ffffffffa04755a7 ffff8800022d9ea8 ffff880002f96400 ffff88000b013800 ffff880002f96400 Call Trace: [<ffffffffa04cd0ce>] nfs4_destroy_server+0x1e/0x30 [nfsv4] [<ffffffffa04755a7>] nfs_free_server+0xb7/0x150 [nfs] [<ffffffffa047d4d5>] nfs_kill_super+0x35/0x40 [nfs] [<ffffffff81178d35>] deactivate_locked_super+0x45/0x70 [<ffffffff8117986a>] deactivate_super+0x4a/0x70 [<ffffffff81193ee2>] mntput_no_expire+0xd2/0x130 [<ffffffff81194d62>] sys_umount+0x72/0xe0 [<ffffffff8154af59>] system_call_fastpath+0x16/0x1b Code: 06 e1 b8 ea ff ff ff eb 9e 0f 1f 44 00 00 55 48 89 e5 53 48 83 ec 08 66 66 66 66 90 48 8b 87 80 03 00 00 48 89 fb 48 85 c0 74 29 <48> 8b 40 38 48 85 c0 74 02 ff d0 48 8b 03 3e ff 48 04 0f 94 c2 RIP [<ffffffffa04cfe6d>] unset_pnfs_layoutdriver+0x1d/0x70 [nfsv4] RSP <ffff8800022d9e48> CR2: ffffffffa04a1b38 ---[ end trace 29f75aaedda058bf ]--- Signed-off-by: fanchaoting<fanchaoting@cn.fujitsu.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com> Cc: stable@vger.kernel.org
2013-02-04 21:15:02 +08:00
.owner = THIS_MODULE,
.flags = PNFS_LAYOUTRET_ON_SETATTR |
PNFS_LAYOUTRET_ON_ERROR |
PNFS_READ_WHOLE_PAGE,
.read_pagelist = bl_read_pagelist,
.write_pagelist = bl_write_pagelist,
.alloc_layout_hdr = bl_alloc_layout_hdr,
.free_layout_hdr = bl_free_layout_hdr,
.alloc_lseg = bl_alloc_lseg,
.free_lseg = bl_free_lseg,
.return_range = bl_return_range,
.prepare_layoutcommit = bl_prepare_layoutcommit,
.cleanup_layoutcommit = bl_cleanup_layoutcommit,
.set_layoutdriver = bl_set_layoutdriver,
.alloc_deviceid_node = bl_alloc_deviceid_node,
.free_deviceid_node = bl_free_deviceid_node,
.pg_read_ops = &bl_pg_read_ops,
.pg_write_ops = &bl_pg_write_ops,
.sync = pnfs_generic_sync,
};
static struct pnfs_layoutdriver_type scsilayout_type = {
.id = LAYOUT_SCSI,
.name = "LAYOUT_SCSI",
.owner = THIS_MODULE,
.flags = PNFS_LAYOUTRET_ON_SETATTR |
PNFS_LAYOUTRET_ON_ERROR |
PNFS_READ_WHOLE_PAGE,
.read_pagelist = bl_read_pagelist,
.write_pagelist = bl_write_pagelist,
.alloc_layout_hdr = sl_alloc_layout_hdr,
.free_layout_hdr = bl_free_layout_hdr,
.alloc_lseg = bl_alloc_lseg,
.free_lseg = bl_free_lseg,
.return_range = bl_return_range,
.prepare_layoutcommit = bl_prepare_layoutcommit,
.cleanup_layoutcommit = bl_cleanup_layoutcommit,
.set_layoutdriver = bl_set_layoutdriver,
.alloc_deviceid_node = bl_alloc_deviceid_node,
.free_deviceid_node = bl_free_deviceid_node,
.pg_read_ops = &bl_pg_read_ops,
.pg_write_ops = &bl_pg_write_ops,
.sync = pnfs_generic_sync,
};
static int __init nfs4blocklayout_init(void)
{
int ret;
dprintk("%s: NFSv4 Block Layout Driver Registering...\n", __func__);
ret = bl_init_pipefs();
if (ret)
goto out;
ret = pnfs_register_layoutdriver(&blocklayout_type);
if (ret)
goto out_cleanup_pipe;
ret = pnfs_register_layoutdriver(&scsilayout_type);
if (ret)
goto out_unregister_block;
return 0;
out_unregister_block:
pnfs_unregister_layoutdriver(&blocklayout_type);
out_cleanup_pipe:
bl_cleanup_pipefs();
out:
return ret;
}
static void __exit nfs4blocklayout_exit(void)
{
dprintk("%s: NFSv4 Block Layout Driver Unregistering...\n",
__func__);
pnfs_unregister_layoutdriver(&scsilayout_type);
pnfs_unregister_layoutdriver(&blocklayout_type);
bl_cleanup_pipefs();
}
MODULE_ALIAS("nfs-layouttype4-3");
MODULE_ALIAS("nfs-layouttype4-5");
module_init(nfs4blocklayout_init);
module_exit(nfs4blocklayout_exit);