OpenCloudOS-Kernel/fs/btrfs/transaction.c

2555 lines
73 KiB
C
Raw Normal View History

// SPDX-License-Identifier: GPL-2.0
/*
* Copyright (C) 2007 Oracle. All rights reserved.
*/
#include <linux/fs.h>
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-24 16:04:11 +08:00
#include <linux/slab.h>
#include <linux/sched.h>
#include <linux/writeback.h>
#include <linux/pagemap.h>
#include <linux/blkdev.h>
#include <linux/uuid.h>
#include "misc.h"
#include "ctree.h"
#include "disk-io.h"
#include "transaction.h"
#include "locking.h"
#include "tree-log.h"
#include "volumes.h"
#include "dev-replace.h"
Btrfs: rework qgroup accounting Currently qgroups account for space by intercepting delayed ref updates to fs trees. It does this by adding sequence numbers to delayed ref updates so that it can figure out how the tree looked before the update so we can adjust the counters properly. The problem with this is that it does not allow delayed refs to be merged, so if you say are defragging an extent with 5k snapshots pointing to it we will thrash the delayed ref lock because we need to go back and manually merge these things together. Instead we want to process quota changes when we know they are going to happen, like when we first allocate an extent, we free a reference for an extent, we add new references etc. This patch accomplishes this by only adding qgroup operations for real ref changes. We only modify the sequence number when we need to lookup roots for bytenrs, this reduces the amount of churn on the sequence number and allows us to merge delayed refs as we add them most of the time. This patch encompasses a bunch of architectural changes 1) qgroup ref operations: instead of tracking qgroup operations through the delayed refs we simply add new ref operations whenever we notice that we need to when we've modified the refs themselves. 2) tree mod seq: we no longer have this separation of major/minor counters. this makes the sequence number stuff much more sane and we can remove some locking that was needed to protect the counter. 3) delayed ref seq: we now read the tree mod seq number and use that as our sequence. This means each new delayed ref doesn't have it's own unique sequence number, rather whenever we go to lookup backrefs we inc the sequence number so we can make sure to keep any new operations from screwing up our world view at that given point. This allows us to merge delayed refs during runtime. With all of these changes the delayed ref stuff is a little saner and the qgroup accounting stuff no longer goes negative in some cases like it was before. Thanks, Signed-off-by: Josef Bacik <jbacik@fb.com> Signed-off-by: Chris Mason <clm@fb.com>
2014-05-14 08:30:47 +08:00
#include "qgroup.h"
#include "block-group.h"
btrfs: force chunk allocation if our global rsv is larger than metadata Nikolay noticed a bunch of test failures with my global rsv steal patches. At first he thought they were introduced by them, but they've been failing for a while with 64k nodes. The problem is with 64k nodes we have a global reserve that calculates out to 13MiB on a freshly made file system, which only has 8MiB of metadata space. Because of changes I previously made we no longer account for the global reserve in the overcommit logic, which means we correctly allow overcommit to happen even though we are already overcommitted. However in some corner cases, for example btrfs/170, we will allocate the entire file system up with data chunks before we have enough space pressure to allocate a metadata chunk. Then once the fs is full we ENOSPC out because we cannot overcommit and the global reserve is taking up all of the available space. The most ideal way to deal with this is to change our space reservation stuff to take into account the height of the tree's that we're modifying, so that our global reserve calculation does not end up so obscenely large. However that is a huge undertaking. Instead fix this by forcing a chunk allocation if the global reserve is larger than the total metadata space. This gives us essentially the same behavior that happened before, we get a chunk allocated and these tests can pass. This is meant to be a stop-gap measure until we can tackle the "tree height only" project. Fixes: 0096420adb03 ("btrfs: do not account global reserve in can_overcommit") CC: stable@vger.kernel.org # 5.4+ Reviewed-by: Nikolay Borisov <nborisov@suse.com> Tested-by: Nikolay Borisov <nborisov@suse.com> Signed-off-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: David Sterba <dsterba@suse.com>
2020-03-14 03:28:48 +08:00
#include "space-info.h"
#include "zoned.h"
#define BTRFS_ROOT_TRANS_TAG 0
/*
* Transaction states and transitions
*
* No running transaction (fs tree blocks are not modified)
* |
* | To next stage:
* | Call start_transaction() variants. Except btrfs_join_transaction_nostart().
* V
* Transaction N [[TRANS_STATE_RUNNING]]
* |
* | New trans handles can be attached to transaction N by calling all
* | start_transaction() variants.
* |
* | To next stage:
* | Call btrfs_commit_transaction() on any trans handle attached to
* | transaction N
* V
* Transaction N [[TRANS_STATE_COMMIT_START]]
* |
* | Will wait for previous running transaction to completely finish if there
* | is one
* |
* | Then one of the following happes:
* | - Wait for all other trans handle holders to release.
* | The btrfs_commit_transaction() caller will do the commit work.
* | - Wait for current transaction to be committed by others.
* | Other btrfs_commit_transaction() caller will do the commit work.
* |
* | At this stage, only btrfs_join_transaction*() variants can attach
* | to this running transaction.
* | All other variants will wait for current one to finish and attach to
* | transaction N+1.
* |
* | To next stage:
* | Caller is chosen to commit transaction N, and all other trans handle
* | haven been released.
* V
* Transaction N [[TRANS_STATE_COMMIT_DOING]]
* |
* | The heavy lifting transaction work is started.
* | From running delayed refs (modifying extent tree) to creating pending
* | snapshots, running qgroups.
* | In short, modify supporting trees to reflect modifications of subvolume
* | trees.
* |
* | At this stage, all start_transaction() calls will wait for this
* | transaction to finish and attach to transaction N+1.
* |
* | To next stage:
* | Until all supporting trees are updated.
* V
* Transaction N [[TRANS_STATE_UNBLOCKED]]
* | Transaction N+1
* | All needed trees are modified, thus we only [[TRANS_STATE_RUNNING]]
* | need to write them back to disk and update |
* | super blocks. |
* | |
* | At this stage, new transaction is allowed to |
* | start. |
* | All new start_transaction() calls will be |
* | attached to transid N+1. |
* | |
* | To next stage: |
* | Until all tree blocks are super blocks are |
* | written to block devices |
* V |
* Transaction N [[TRANS_STATE_COMPLETED]] V
* All tree blocks and super blocks are written. Transaction N+1
* This transaction is finished and all its [[TRANS_STATE_COMMIT_START]]
* data structures will be cleaned up. | Life goes on
*/
static const unsigned int btrfs_blocked_trans_types[TRANS_STATE_MAX] = {
Btrfs: make the state of the transaction more readable We used 3 variants to track the state of the transaction, it was complex and wasted the memory space. Besides that, it was hard to understand that which types of the transaction handles should be blocked in each transaction state, so the developers often made mistakes. This patch improved the above problem. In this patch, we define 6 states for the transaction, enum btrfs_trans_state { TRANS_STATE_RUNNING = 0, TRANS_STATE_BLOCKED = 1, TRANS_STATE_COMMIT_START = 2, TRANS_STATE_COMMIT_DOING = 3, TRANS_STATE_UNBLOCKED = 4, TRANS_STATE_COMPLETED = 5, TRANS_STATE_MAX = 6, } and just use 1 variant to track those state. In order to make the blocked handle types for each state more clear, we introduce a array: unsigned int btrfs_blocked_trans_types[TRANS_STATE_MAX] = { [TRANS_STATE_RUNNING] = 0U, [TRANS_STATE_BLOCKED] = (__TRANS_USERSPACE | __TRANS_START), [TRANS_STATE_COMMIT_START] = (__TRANS_USERSPACE | __TRANS_START | __TRANS_ATTACH), [TRANS_STATE_COMMIT_DOING] = (__TRANS_USERSPACE | __TRANS_START | __TRANS_ATTACH | __TRANS_JOIN), [TRANS_STATE_UNBLOCKED] = (__TRANS_USERSPACE | __TRANS_START | __TRANS_ATTACH | __TRANS_JOIN | __TRANS_JOIN_NOLOCK), [TRANS_STATE_COMPLETED] = (__TRANS_USERSPACE | __TRANS_START | __TRANS_ATTACH | __TRANS_JOIN | __TRANS_JOIN_NOLOCK), } it is very intuitionistic. Besides that, because we remove ->in_commit in transaction structure, so the lock ->commit_lock which was used to protect it is unnecessary, remove ->commit_lock. Signed-off-by: Miao Xie <miaox@cn.fujitsu.com> Signed-off-by: Josef Bacik <jbacik@fusionio.com>
2013-05-17 11:53:43 +08:00
[TRANS_STATE_RUNNING] = 0U,
[TRANS_STATE_COMMIT_START] = (__TRANS_START | __TRANS_ATTACH),
[TRANS_STATE_COMMIT_DOING] = (__TRANS_START |
Btrfs: make the state of the transaction more readable We used 3 variants to track the state of the transaction, it was complex and wasted the memory space. Besides that, it was hard to understand that which types of the transaction handles should be blocked in each transaction state, so the developers often made mistakes. This patch improved the above problem. In this patch, we define 6 states for the transaction, enum btrfs_trans_state { TRANS_STATE_RUNNING = 0, TRANS_STATE_BLOCKED = 1, TRANS_STATE_COMMIT_START = 2, TRANS_STATE_COMMIT_DOING = 3, TRANS_STATE_UNBLOCKED = 4, TRANS_STATE_COMPLETED = 5, TRANS_STATE_MAX = 6, } and just use 1 variant to track those state. In order to make the blocked handle types for each state more clear, we introduce a array: unsigned int btrfs_blocked_trans_types[TRANS_STATE_MAX] = { [TRANS_STATE_RUNNING] = 0U, [TRANS_STATE_BLOCKED] = (__TRANS_USERSPACE | __TRANS_START), [TRANS_STATE_COMMIT_START] = (__TRANS_USERSPACE | __TRANS_START | __TRANS_ATTACH), [TRANS_STATE_COMMIT_DOING] = (__TRANS_USERSPACE | __TRANS_START | __TRANS_ATTACH | __TRANS_JOIN), [TRANS_STATE_UNBLOCKED] = (__TRANS_USERSPACE | __TRANS_START | __TRANS_ATTACH | __TRANS_JOIN | __TRANS_JOIN_NOLOCK), [TRANS_STATE_COMPLETED] = (__TRANS_USERSPACE | __TRANS_START | __TRANS_ATTACH | __TRANS_JOIN | __TRANS_JOIN_NOLOCK), } it is very intuitionistic. Besides that, because we remove ->in_commit in transaction structure, so the lock ->commit_lock which was used to protect it is unnecessary, remove ->commit_lock. Signed-off-by: Miao Xie <miaox@cn.fujitsu.com> Signed-off-by: Josef Bacik <jbacik@fusionio.com>
2013-05-17 11:53:43 +08:00
__TRANS_ATTACH |
Btrfs: fix deadlock between fiemap and transaction commits The fiemap handler locks a file range that can have unflushed delalloc, and after locking the range, it tries to attach to a running transaction. If the running transaction started its commit, that is, it is in state TRANS_STATE_COMMIT_START, and either the filesystem was mounted with the flushoncommit option or the transaction is creating a snapshot for the subvolume that contains the file that fiemap is operating on, we end up deadlocking. This happens because fiemap is blocked on the transaction, waiting for it to complete, and the transaction is waiting for the flushed dealloc to complete, which requires locking the file range that the fiemap task already locked. The following stack traces serve as an example of when this deadlock happens: (...) [404571.515510] Workqueue: btrfs-endio-write btrfs_endio_write_helper [btrfs] [404571.515956] Call Trace: [404571.516360] ? __schedule+0x3ae/0x7b0 [404571.516730] schedule+0x3a/0xb0 [404571.517104] lock_extent_bits+0x1ec/0x2a0 [btrfs] [404571.517465] ? remove_wait_queue+0x60/0x60 [404571.517832] btrfs_finish_ordered_io+0x292/0x800 [btrfs] [404571.518202] normal_work_helper+0xea/0x530 [btrfs] [404571.518566] process_one_work+0x21e/0x5c0 [404571.518990] worker_thread+0x4f/0x3b0 [404571.519413] ? process_one_work+0x5c0/0x5c0 [404571.519829] kthread+0x103/0x140 [404571.520191] ? kthread_create_worker_on_cpu+0x70/0x70 [404571.520565] ret_from_fork+0x3a/0x50 [404571.520915] kworker/u8:6 D 0 31651 2 0x80004000 [404571.521290] Workqueue: btrfs-flush_delalloc btrfs_flush_delalloc_helper [btrfs] (...) [404571.537000] fsstress D 0 13117 13115 0x00004000 [404571.537263] Call Trace: [404571.537524] ? __schedule+0x3ae/0x7b0 [404571.537788] schedule+0x3a/0xb0 [404571.538066] wait_current_trans+0xc8/0x100 [btrfs] [404571.538349] ? remove_wait_queue+0x60/0x60 [404571.538680] start_transaction+0x33c/0x500 [btrfs] [404571.539076] btrfs_check_shared+0xa3/0x1f0 [btrfs] [404571.539513] ? extent_fiemap+0x2ce/0x650 [btrfs] [404571.539866] extent_fiemap+0x2ce/0x650 [btrfs] [404571.540170] do_vfs_ioctl+0x526/0x6f0 [404571.540436] ksys_ioctl+0x70/0x80 [404571.540734] __x64_sys_ioctl+0x16/0x20 [404571.540997] do_syscall_64+0x60/0x1d0 [404571.541279] entry_SYSCALL_64_after_hwframe+0x49/0xbe (...) [404571.543729] btrfs D 0 14210 14208 0x00004000 [404571.544023] Call Trace: [404571.544275] ? __schedule+0x3ae/0x7b0 [404571.544526] ? wait_for_completion+0x112/0x1a0 [404571.544795] schedule+0x3a/0xb0 [404571.545064] schedule_timeout+0x1ff/0x390 [404571.545351] ? lock_acquire+0xa6/0x190 [404571.545638] ? wait_for_completion+0x49/0x1a0 [404571.545890] ? wait_for_completion+0x112/0x1a0 [404571.546228] wait_for_completion+0x131/0x1a0 [404571.546503] ? wake_up_q+0x70/0x70 [404571.546775] btrfs_wait_ordered_extents+0x27c/0x400 [btrfs] [404571.547159] btrfs_commit_transaction+0x3b0/0xae0 [btrfs] [404571.547449] ? btrfs_mksubvol+0x4a4/0x640 [btrfs] [404571.547703] ? remove_wait_queue+0x60/0x60 [404571.547969] btrfs_mksubvol+0x605/0x640 [btrfs] [404571.548226] ? __sb_start_write+0xd4/0x1c0 [404571.548512] ? mnt_want_write_file+0x24/0x50 [404571.548789] btrfs_ioctl_snap_create_transid+0x169/0x1a0 [btrfs] [404571.549048] btrfs_ioctl_snap_create_v2+0x11d/0x170 [btrfs] [404571.549307] btrfs_ioctl+0x133f/0x3150 [btrfs] [404571.549549] ? mem_cgroup_charge_statistics+0x4c/0xd0 [404571.549792] ? mem_cgroup_commit_charge+0x84/0x4b0 [404571.550064] ? __handle_mm_fault+0xe3e/0x11f0 [404571.550306] ? do_raw_spin_unlock+0x49/0xc0 [404571.550608] ? _raw_spin_unlock+0x24/0x30 [404571.550976] ? __handle_mm_fault+0xedf/0x11f0 [404571.551319] ? do_vfs_ioctl+0xa2/0x6f0 [404571.551659] ? btrfs_ioctl_get_supported_features+0x30/0x30 [btrfs] [404571.552087] do_vfs_ioctl+0xa2/0x6f0 [404571.552355] ksys_ioctl+0x70/0x80 [404571.552621] __x64_sys_ioctl+0x16/0x20 [404571.552864] do_syscall_64+0x60/0x1d0 [404571.553104] entry_SYSCALL_64_after_hwframe+0x49/0xbe (...) If we were joining the transaction instead of attaching to it, we would not risk a deadlock because a join only blocks if the transaction is in a state greater then or equals to TRANS_STATE_COMMIT_DOING, and the delalloc flush performed by a transaction is done before it reaches that state, when it is in the state TRANS_STATE_COMMIT_START. However a transaction join is intended for use cases where we do modify the filesystem, and fiemap only needs to peek at delayed references from the current transaction in order to determine if extents are shared, and, besides that, when there is no current transaction or when it blocks to wait for a current committing transaction to complete, it creates a new transaction without reserving any space. Such unnecessary transactions, besides doing unnecessary IO, can cause transaction aborts (-ENOSPC) and unnecessary rotation of the precious backup roots. So fix this by adding a new transaction join variant, named join_nostart, which behaves like the regular join, but it does not create a transaction when none currently exists or after waiting for a committing transaction to complete. Fixes: 03628cdbc64db6 ("Btrfs: do not start a transaction during fiemap") Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2019-07-29 16:37:10 +08:00
__TRANS_JOIN |
__TRANS_JOIN_NOSTART),
[TRANS_STATE_UNBLOCKED] = (__TRANS_START |
Btrfs: make the state of the transaction more readable We used 3 variants to track the state of the transaction, it was complex and wasted the memory space. Besides that, it was hard to understand that which types of the transaction handles should be blocked in each transaction state, so the developers often made mistakes. This patch improved the above problem. In this patch, we define 6 states for the transaction, enum btrfs_trans_state { TRANS_STATE_RUNNING = 0, TRANS_STATE_BLOCKED = 1, TRANS_STATE_COMMIT_START = 2, TRANS_STATE_COMMIT_DOING = 3, TRANS_STATE_UNBLOCKED = 4, TRANS_STATE_COMPLETED = 5, TRANS_STATE_MAX = 6, } and just use 1 variant to track those state. In order to make the blocked handle types for each state more clear, we introduce a array: unsigned int btrfs_blocked_trans_types[TRANS_STATE_MAX] = { [TRANS_STATE_RUNNING] = 0U, [TRANS_STATE_BLOCKED] = (__TRANS_USERSPACE | __TRANS_START), [TRANS_STATE_COMMIT_START] = (__TRANS_USERSPACE | __TRANS_START | __TRANS_ATTACH), [TRANS_STATE_COMMIT_DOING] = (__TRANS_USERSPACE | __TRANS_START | __TRANS_ATTACH | __TRANS_JOIN), [TRANS_STATE_UNBLOCKED] = (__TRANS_USERSPACE | __TRANS_START | __TRANS_ATTACH | __TRANS_JOIN | __TRANS_JOIN_NOLOCK), [TRANS_STATE_COMPLETED] = (__TRANS_USERSPACE | __TRANS_START | __TRANS_ATTACH | __TRANS_JOIN | __TRANS_JOIN_NOLOCK), } it is very intuitionistic. Besides that, because we remove ->in_commit in transaction structure, so the lock ->commit_lock which was used to protect it is unnecessary, remove ->commit_lock. Signed-off-by: Miao Xie <miaox@cn.fujitsu.com> Signed-off-by: Josef Bacik <jbacik@fusionio.com>
2013-05-17 11:53:43 +08:00
__TRANS_ATTACH |
__TRANS_JOIN |
Btrfs: fix deadlock between fiemap and transaction commits The fiemap handler locks a file range that can have unflushed delalloc, and after locking the range, it tries to attach to a running transaction. If the running transaction started its commit, that is, it is in state TRANS_STATE_COMMIT_START, and either the filesystem was mounted with the flushoncommit option or the transaction is creating a snapshot for the subvolume that contains the file that fiemap is operating on, we end up deadlocking. This happens because fiemap is blocked on the transaction, waiting for it to complete, and the transaction is waiting for the flushed dealloc to complete, which requires locking the file range that the fiemap task already locked. The following stack traces serve as an example of when this deadlock happens: (...) [404571.515510] Workqueue: btrfs-endio-write btrfs_endio_write_helper [btrfs] [404571.515956] Call Trace: [404571.516360] ? __schedule+0x3ae/0x7b0 [404571.516730] schedule+0x3a/0xb0 [404571.517104] lock_extent_bits+0x1ec/0x2a0 [btrfs] [404571.517465] ? remove_wait_queue+0x60/0x60 [404571.517832] btrfs_finish_ordered_io+0x292/0x800 [btrfs] [404571.518202] normal_work_helper+0xea/0x530 [btrfs] [404571.518566] process_one_work+0x21e/0x5c0 [404571.518990] worker_thread+0x4f/0x3b0 [404571.519413] ? process_one_work+0x5c0/0x5c0 [404571.519829] kthread+0x103/0x140 [404571.520191] ? kthread_create_worker_on_cpu+0x70/0x70 [404571.520565] ret_from_fork+0x3a/0x50 [404571.520915] kworker/u8:6 D 0 31651 2 0x80004000 [404571.521290] Workqueue: btrfs-flush_delalloc btrfs_flush_delalloc_helper [btrfs] (...) [404571.537000] fsstress D 0 13117 13115 0x00004000 [404571.537263] Call Trace: [404571.537524] ? __schedule+0x3ae/0x7b0 [404571.537788] schedule+0x3a/0xb0 [404571.538066] wait_current_trans+0xc8/0x100 [btrfs] [404571.538349] ? remove_wait_queue+0x60/0x60 [404571.538680] start_transaction+0x33c/0x500 [btrfs] [404571.539076] btrfs_check_shared+0xa3/0x1f0 [btrfs] [404571.539513] ? extent_fiemap+0x2ce/0x650 [btrfs] [404571.539866] extent_fiemap+0x2ce/0x650 [btrfs] [404571.540170] do_vfs_ioctl+0x526/0x6f0 [404571.540436] ksys_ioctl+0x70/0x80 [404571.540734] __x64_sys_ioctl+0x16/0x20 [404571.540997] do_syscall_64+0x60/0x1d0 [404571.541279] entry_SYSCALL_64_after_hwframe+0x49/0xbe (...) [404571.543729] btrfs D 0 14210 14208 0x00004000 [404571.544023] Call Trace: [404571.544275] ? __schedule+0x3ae/0x7b0 [404571.544526] ? wait_for_completion+0x112/0x1a0 [404571.544795] schedule+0x3a/0xb0 [404571.545064] schedule_timeout+0x1ff/0x390 [404571.545351] ? lock_acquire+0xa6/0x190 [404571.545638] ? wait_for_completion+0x49/0x1a0 [404571.545890] ? wait_for_completion+0x112/0x1a0 [404571.546228] wait_for_completion+0x131/0x1a0 [404571.546503] ? wake_up_q+0x70/0x70 [404571.546775] btrfs_wait_ordered_extents+0x27c/0x400 [btrfs] [404571.547159] btrfs_commit_transaction+0x3b0/0xae0 [btrfs] [404571.547449] ? btrfs_mksubvol+0x4a4/0x640 [btrfs] [404571.547703] ? remove_wait_queue+0x60/0x60 [404571.547969] btrfs_mksubvol+0x605/0x640 [btrfs] [404571.548226] ? __sb_start_write+0xd4/0x1c0 [404571.548512] ? mnt_want_write_file+0x24/0x50 [404571.548789] btrfs_ioctl_snap_create_transid+0x169/0x1a0 [btrfs] [404571.549048] btrfs_ioctl_snap_create_v2+0x11d/0x170 [btrfs] [404571.549307] btrfs_ioctl+0x133f/0x3150 [btrfs] [404571.549549] ? mem_cgroup_charge_statistics+0x4c/0xd0 [404571.549792] ? mem_cgroup_commit_charge+0x84/0x4b0 [404571.550064] ? __handle_mm_fault+0xe3e/0x11f0 [404571.550306] ? do_raw_spin_unlock+0x49/0xc0 [404571.550608] ? _raw_spin_unlock+0x24/0x30 [404571.550976] ? __handle_mm_fault+0xedf/0x11f0 [404571.551319] ? do_vfs_ioctl+0xa2/0x6f0 [404571.551659] ? btrfs_ioctl_get_supported_features+0x30/0x30 [btrfs] [404571.552087] do_vfs_ioctl+0xa2/0x6f0 [404571.552355] ksys_ioctl+0x70/0x80 [404571.552621] __x64_sys_ioctl+0x16/0x20 [404571.552864] do_syscall_64+0x60/0x1d0 [404571.553104] entry_SYSCALL_64_after_hwframe+0x49/0xbe (...) If we were joining the transaction instead of attaching to it, we would not risk a deadlock because a join only blocks if the transaction is in a state greater then or equals to TRANS_STATE_COMMIT_DOING, and the delalloc flush performed by a transaction is done before it reaches that state, when it is in the state TRANS_STATE_COMMIT_START. However a transaction join is intended for use cases where we do modify the filesystem, and fiemap only needs to peek at delayed references from the current transaction in order to determine if extents are shared, and, besides that, when there is no current transaction or when it blocks to wait for a current committing transaction to complete, it creates a new transaction without reserving any space. Such unnecessary transactions, besides doing unnecessary IO, can cause transaction aborts (-ENOSPC) and unnecessary rotation of the precious backup roots. So fix this by adding a new transaction join variant, named join_nostart, which behaves like the regular join, but it does not create a transaction when none currently exists or after waiting for a committing transaction to complete. Fixes: 03628cdbc64db6 ("Btrfs: do not start a transaction during fiemap") Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2019-07-29 16:37:10 +08:00
__TRANS_JOIN_NOLOCK |
__TRANS_JOIN_NOSTART),
btrfs: make concurrent fsyncs wait less when waiting for a transaction commit Often an fsync needs to fallback to a transaction commit for several reasons (to ensure consistency after a power failure, a new block group was allocated or a temporary error such as ENOMEM or ENOSPC happened). In that case the log is marked as needing a full commit and any concurrent tasks attempting to log inodes or commit the log will also fallback to the transaction commit. When this happens they all wait for the task that first started the transaction commit to finish the transaction commit - however they wait until the full transaction commit happens, which is not needed, as they only need to wait for the superblocks to be persisted and not for unpinning all the extents pinned during the transaction's lifetime, which even for short lived transactions can be a few thousand and take some significant amount of time to complete - for dbench workloads I have observed up to 4~5 milliseconds of time spent unpinning extents in the worst cases, and the number of pinned extents was between 2 to 3 thousand. So allow fsync tasks to skip waiting for the unpinning of extents when they call btrfs_commit_transaction() and they were not the task that started the transaction commit (that one has to do it, the alternative would be to offload the transaction commit to another task so that it could avoid waiting for the extent unpinning or offload the extent unpinning to another task). This patch is part of a patchset comprised of the following patches: btrfs: remove unnecessary directory inode item update when deleting dir entry btrfs: stop setting nbytes when filling inode item for logging btrfs: avoid logging new ancestor inodes when logging new inode btrfs: skip logging directories already logged when logging all parents btrfs: skip logging inodes already logged when logging new entries btrfs: remove unnecessary check_parent_dirs_for_sync() btrfs: make concurrent fsyncs wait less when waiting for a transaction commit After applying the entire patchset, dbench shows improvements in respect to throughput and latency. The script used to measure it is the following: $ cat dbench-test.sh #!/bin/bash DEV=/dev/sdk MNT=/mnt/sdk MOUNT_OPTIONS="-o ssd" MKFS_OPTIONS="-m single -d single" echo "performance" | tee /sys/devices/system/cpu/cpu*/cpufreq/scaling_governor umount $DEV &> /dev/null mkfs.btrfs -f $MKFS_OPTIONS $DEV mount $MOUNT_OPTIONS $DEV $MNT dbench -D $MNT -t 300 64 umount $MNT The test was run on a physical machine with 12 cores (Intel corei7), 64G of ram, using a NVMe device and a non-debug kernel configuration (Debian's default configuration). Before applying patchset, 32 clients: Operation Count AvgLat MaxLat ---------------------------------------- NTCreateX 9627107 0.153 61.938 Close 7072076 0.001 3.175 Rename 407633 1.222 44.439 Unlink 1943895 0.658 44.440 Deltree 256 17.339 110.891 Mkdir 128 0.003 0.009 Qpathinfo 8725406 0.064 17.850 Qfileinfo 1529516 0.001 2.188 Qfsinfo 1599884 0.002 1.457 Sfileinfo 784200 0.005 3.562 Find 3373513 0.411 30.312 WriteX 4802132 0.053 29.054 ReadX 15089959 0.002 5.801 LockX 31344 0.002 0.425 UnlockX 31344 0.001 0.173 Flush 674724 5.952 341.830 Throughput 1008.02 MB/sec 32 clients 32 procs max_latency=341.833 ms After applying patchset, 32 clients: After patchset, with 32 clients: Operation Count AvgLat MaxLat ---------------------------------------- NTCreateX 9931568 0.111 25.597 Close 7295730 0.001 2.171 Rename 420549 0.982 49.714 Unlink 2005366 0.497 39.015 Deltree 256 11.149 89.242 Mkdir 128 0.002 0.014 Qpathinfo 9001863 0.049 20.761 Qfileinfo 1577730 0.001 2.546 Qfsinfo 1650508 0.002 3.531 Sfileinfo 809031 0.005 5.846 Find 3480259 0.309 23.977 WriteX 4952505 0.043 41.283 ReadX 15568127 0.002 5.476 LockX 32338 0.002 0.978 UnlockX 32338 0.001 2.032 Flush 696017 7.485 228.835 Throughput 1049.91 MB/sec 32 clients 32 procs max_latency=228.847 ms --> +4.1% throughput, -39.6% max latency Before applying patchset, 64 clients: Operation Count AvgLat MaxLat ---------------------------------------- NTCreateX 8956748 0.342 108.312 Close 6579660 0.001 3.823 Rename 379209 2.396 81.897 Unlink 1808625 1.108 131.148 Deltree 256 25.632 172.176 Mkdir 128 0.003 0.018 Qpathinfo 8117615 0.131 55.916 Qfileinfo 1423495 0.001 2.635 Qfsinfo 1488496 0.002 5.412 Sfileinfo 729472 0.007 8.643 Find 3138598 0.855 78.321 WriteX 4470783 0.102 79.442 ReadX 14038139 0.002 7.578 LockX 29158 0.002 0.844 UnlockX 29158 0.001 0.567 Flush 627746 14.168 506.151 Throughput 924.738 MB/sec 64 clients 64 procs max_latency=506.154 ms After applying patchset, 64 clients: Operation Count AvgLat MaxLat ---------------------------------------- NTCreateX 9069003 0.303 43.193 Close 6662328 0.001 3.888 Rename 383976 2.194 46.418 Unlink 1831080 1.022 43.873 Deltree 256 24.037 155.763 Mkdir 128 0.002 0.005 Qpathinfo 8219173 0.137 30.233 Qfileinfo 1441203 0.001 3.204 Qfsinfo 1507092 0.002 4.055 Sfileinfo 738775 0.006 5.431 Find 3177874 0.936 38.170 WriteX 4526152 0.084 39.518 ReadX 14213562 0.002 24.760 LockX 29522 0.002 1.221 UnlockX 29522 0.001 0.694 Flush 635652 14.358 422.039 Throughput 990.13 MB/sec 64 clients 64 procs max_latency=422.043 ms --> +6.8% throughput, -18.1% max latency Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2021-01-27 18:35:00 +08:00
[TRANS_STATE_SUPER_COMMITTED] = (__TRANS_START |
__TRANS_ATTACH |
__TRANS_JOIN |
__TRANS_JOIN_NOLOCK |
__TRANS_JOIN_NOSTART),
[TRANS_STATE_COMPLETED] = (__TRANS_START |
Btrfs: make the state of the transaction more readable We used 3 variants to track the state of the transaction, it was complex and wasted the memory space. Besides that, it was hard to understand that which types of the transaction handles should be blocked in each transaction state, so the developers often made mistakes. This patch improved the above problem. In this patch, we define 6 states for the transaction, enum btrfs_trans_state { TRANS_STATE_RUNNING = 0, TRANS_STATE_BLOCKED = 1, TRANS_STATE_COMMIT_START = 2, TRANS_STATE_COMMIT_DOING = 3, TRANS_STATE_UNBLOCKED = 4, TRANS_STATE_COMPLETED = 5, TRANS_STATE_MAX = 6, } and just use 1 variant to track those state. In order to make the blocked handle types for each state more clear, we introduce a array: unsigned int btrfs_blocked_trans_types[TRANS_STATE_MAX] = { [TRANS_STATE_RUNNING] = 0U, [TRANS_STATE_BLOCKED] = (__TRANS_USERSPACE | __TRANS_START), [TRANS_STATE_COMMIT_START] = (__TRANS_USERSPACE | __TRANS_START | __TRANS_ATTACH), [TRANS_STATE_COMMIT_DOING] = (__TRANS_USERSPACE | __TRANS_START | __TRANS_ATTACH | __TRANS_JOIN), [TRANS_STATE_UNBLOCKED] = (__TRANS_USERSPACE | __TRANS_START | __TRANS_ATTACH | __TRANS_JOIN | __TRANS_JOIN_NOLOCK), [TRANS_STATE_COMPLETED] = (__TRANS_USERSPACE | __TRANS_START | __TRANS_ATTACH | __TRANS_JOIN | __TRANS_JOIN_NOLOCK), } it is very intuitionistic. Besides that, because we remove ->in_commit in transaction structure, so the lock ->commit_lock which was used to protect it is unnecessary, remove ->commit_lock. Signed-off-by: Miao Xie <miaox@cn.fujitsu.com> Signed-off-by: Josef Bacik <jbacik@fusionio.com>
2013-05-17 11:53:43 +08:00
__TRANS_ATTACH |
__TRANS_JOIN |
Btrfs: fix deadlock between fiemap and transaction commits The fiemap handler locks a file range that can have unflushed delalloc, and after locking the range, it tries to attach to a running transaction. If the running transaction started its commit, that is, it is in state TRANS_STATE_COMMIT_START, and either the filesystem was mounted with the flushoncommit option or the transaction is creating a snapshot for the subvolume that contains the file that fiemap is operating on, we end up deadlocking. This happens because fiemap is blocked on the transaction, waiting for it to complete, and the transaction is waiting for the flushed dealloc to complete, which requires locking the file range that the fiemap task already locked. The following stack traces serve as an example of when this deadlock happens: (...) [404571.515510] Workqueue: btrfs-endio-write btrfs_endio_write_helper [btrfs] [404571.515956] Call Trace: [404571.516360] ? __schedule+0x3ae/0x7b0 [404571.516730] schedule+0x3a/0xb0 [404571.517104] lock_extent_bits+0x1ec/0x2a0 [btrfs] [404571.517465] ? remove_wait_queue+0x60/0x60 [404571.517832] btrfs_finish_ordered_io+0x292/0x800 [btrfs] [404571.518202] normal_work_helper+0xea/0x530 [btrfs] [404571.518566] process_one_work+0x21e/0x5c0 [404571.518990] worker_thread+0x4f/0x3b0 [404571.519413] ? process_one_work+0x5c0/0x5c0 [404571.519829] kthread+0x103/0x140 [404571.520191] ? kthread_create_worker_on_cpu+0x70/0x70 [404571.520565] ret_from_fork+0x3a/0x50 [404571.520915] kworker/u8:6 D 0 31651 2 0x80004000 [404571.521290] Workqueue: btrfs-flush_delalloc btrfs_flush_delalloc_helper [btrfs] (...) [404571.537000] fsstress D 0 13117 13115 0x00004000 [404571.537263] Call Trace: [404571.537524] ? __schedule+0x3ae/0x7b0 [404571.537788] schedule+0x3a/0xb0 [404571.538066] wait_current_trans+0xc8/0x100 [btrfs] [404571.538349] ? remove_wait_queue+0x60/0x60 [404571.538680] start_transaction+0x33c/0x500 [btrfs] [404571.539076] btrfs_check_shared+0xa3/0x1f0 [btrfs] [404571.539513] ? extent_fiemap+0x2ce/0x650 [btrfs] [404571.539866] extent_fiemap+0x2ce/0x650 [btrfs] [404571.540170] do_vfs_ioctl+0x526/0x6f0 [404571.540436] ksys_ioctl+0x70/0x80 [404571.540734] __x64_sys_ioctl+0x16/0x20 [404571.540997] do_syscall_64+0x60/0x1d0 [404571.541279] entry_SYSCALL_64_after_hwframe+0x49/0xbe (...) [404571.543729] btrfs D 0 14210 14208 0x00004000 [404571.544023] Call Trace: [404571.544275] ? __schedule+0x3ae/0x7b0 [404571.544526] ? wait_for_completion+0x112/0x1a0 [404571.544795] schedule+0x3a/0xb0 [404571.545064] schedule_timeout+0x1ff/0x390 [404571.545351] ? lock_acquire+0xa6/0x190 [404571.545638] ? wait_for_completion+0x49/0x1a0 [404571.545890] ? wait_for_completion+0x112/0x1a0 [404571.546228] wait_for_completion+0x131/0x1a0 [404571.546503] ? wake_up_q+0x70/0x70 [404571.546775] btrfs_wait_ordered_extents+0x27c/0x400 [btrfs] [404571.547159] btrfs_commit_transaction+0x3b0/0xae0 [btrfs] [404571.547449] ? btrfs_mksubvol+0x4a4/0x640 [btrfs] [404571.547703] ? remove_wait_queue+0x60/0x60 [404571.547969] btrfs_mksubvol+0x605/0x640 [btrfs] [404571.548226] ? __sb_start_write+0xd4/0x1c0 [404571.548512] ? mnt_want_write_file+0x24/0x50 [404571.548789] btrfs_ioctl_snap_create_transid+0x169/0x1a0 [btrfs] [404571.549048] btrfs_ioctl_snap_create_v2+0x11d/0x170 [btrfs] [404571.549307] btrfs_ioctl+0x133f/0x3150 [btrfs] [404571.549549] ? mem_cgroup_charge_statistics+0x4c/0xd0 [404571.549792] ? mem_cgroup_commit_charge+0x84/0x4b0 [404571.550064] ? __handle_mm_fault+0xe3e/0x11f0 [404571.550306] ? do_raw_spin_unlock+0x49/0xc0 [404571.550608] ? _raw_spin_unlock+0x24/0x30 [404571.550976] ? __handle_mm_fault+0xedf/0x11f0 [404571.551319] ? do_vfs_ioctl+0xa2/0x6f0 [404571.551659] ? btrfs_ioctl_get_supported_features+0x30/0x30 [btrfs] [404571.552087] do_vfs_ioctl+0xa2/0x6f0 [404571.552355] ksys_ioctl+0x70/0x80 [404571.552621] __x64_sys_ioctl+0x16/0x20 [404571.552864] do_syscall_64+0x60/0x1d0 [404571.553104] entry_SYSCALL_64_after_hwframe+0x49/0xbe (...) If we were joining the transaction instead of attaching to it, we would not risk a deadlock because a join only blocks if the transaction is in a state greater then or equals to TRANS_STATE_COMMIT_DOING, and the delalloc flush performed by a transaction is done before it reaches that state, when it is in the state TRANS_STATE_COMMIT_START. However a transaction join is intended for use cases where we do modify the filesystem, and fiemap only needs to peek at delayed references from the current transaction in order to determine if extents are shared, and, besides that, when there is no current transaction or when it blocks to wait for a current committing transaction to complete, it creates a new transaction without reserving any space. Such unnecessary transactions, besides doing unnecessary IO, can cause transaction aborts (-ENOSPC) and unnecessary rotation of the precious backup roots. So fix this by adding a new transaction join variant, named join_nostart, which behaves like the regular join, but it does not create a transaction when none currently exists or after waiting for a committing transaction to complete. Fixes: 03628cdbc64db6 ("Btrfs: do not start a transaction during fiemap") Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2019-07-29 16:37:10 +08:00
__TRANS_JOIN_NOLOCK |
__TRANS_JOIN_NOSTART),
Btrfs: make the state of the transaction more readable We used 3 variants to track the state of the transaction, it was complex and wasted the memory space. Besides that, it was hard to understand that which types of the transaction handles should be blocked in each transaction state, so the developers often made mistakes. This patch improved the above problem. In this patch, we define 6 states for the transaction, enum btrfs_trans_state { TRANS_STATE_RUNNING = 0, TRANS_STATE_BLOCKED = 1, TRANS_STATE_COMMIT_START = 2, TRANS_STATE_COMMIT_DOING = 3, TRANS_STATE_UNBLOCKED = 4, TRANS_STATE_COMPLETED = 5, TRANS_STATE_MAX = 6, } and just use 1 variant to track those state. In order to make the blocked handle types for each state more clear, we introduce a array: unsigned int btrfs_blocked_trans_types[TRANS_STATE_MAX] = { [TRANS_STATE_RUNNING] = 0U, [TRANS_STATE_BLOCKED] = (__TRANS_USERSPACE | __TRANS_START), [TRANS_STATE_COMMIT_START] = (__TRANS_USERSPACE | __TRANS_START | __TRANS_ATTACH), [TRANS_STATE_COMMIT_DOING] = (__TRANS_USERSPACE | __TRANS_START | __TRANS_ATTACH | __TRANS_JOIN), [TRANS_STATE_UNBLOCKED] = (__TRANS_USERSPACE | __TRANS_START | __TRANS_ATTACH | __TRANS_JOIN | __TRANS_JOIN_NOLOCK), [TRANS_STATE_COMPLETED] = (__TRANS_USERSPACE | __TRANS_START | __TRANS_ATTACH | __TRANS_JOIN | __TRANS_JOIN_NOLOCK), } it is very intuitionistic. Besides that, because we remove ->in_commit in transaction structure, so the lock ->commit_lock which was used to protect it is unnecessary, remove ->commit_lock. Signed-off-by: Miao Xie <miaox@cn.fujitsu.com> Signed-off-by: Josef Bacik <jbacik@fusionio.com>
2013-05-17 11:53:43 +08:00
};
void btrfs_put_transaction(struct btrfs_transaction *transaction)
{
WARN_ON(refcount_read(&transaction->use_count) == 0);
if (refcount_dec_and_test(&transaction->use_count)) {
Btrfs: kill trans_mutex We use trans_mutex for lots of things, here's a basic list 1) To serialize trans_handles joining the currently running transaction 2) To make sure that no new trans handles are started while we are committing 3) To protect the dead_roots list and the transaction lists Really the serializing trans_handles joining is not too hard, and can really get bogged down in acquiring a reference to the transaction. So replace the trans_mutex with a trans_lock spinlock and use it to do the following 1) Protect fs_info->running_transaction. All trans handles have to do is check this, and then take a reference of the transaction and keep on going. 2) Protect the fs_info->trans_list. This doesn't get used too much, basically it just holds the current transactions, which will usually just be the currently committing transaction and the currently running transaction at most. 3) Protect the dead roots list. This is only ever processed by splicing the list so this is relatively simple. 4) Protect the fs_info->reloc_ctl stuff. This is very lightweight and was using the trans_mutex before, so this is a pretty straightforward change. 5) Protect fs_info->no_trans_join. Because we don't hold the trans_lock over the entirety of the commit we need to have a way to block new people from creating a new transaction while we're doing our work. So we set no_trans_join and in join_transaction we test to see if that is set, and if it is we do a wait_on_commit. 6) Make the transaction use count atomic so we don't need to take locks to modify it when we're dropping references. 7) Add a commit_lock to the transaction to make sure multiple people trying to commit the same transaction don't race and commit at the same time. 8) Make open_ioctl_trans an atomic so we don't have to take any locks for ioctl trans. I have tested this with xfstests, but obviously it is a pretty hairy change so lots of testing is greatly appreciated. Thanks, Signed-off-by: Josef Bacik <josef@redhat.com>
2011-04-12 05:25:13 +08:00
BUG_ON(!list_empty(&transaction->list));
Btrfs: delayed-refs: use rb_first_cached for href_root rb_first_cached() trades an extra pointer "leftmost" for doing the same job as rb_first() but in O(1). Functions manipulating href_root need to get the first entry, this converts href_root to use rb_first_cached(). This patch is first in the sequenct of similar updates to other rbtrees and this is analysis of the expected behaviour and improvements. There's a common pattern: while (node = rb_first) { entry = rb_entry(node) next = rb_next(node) rb_erase(node) cleanup(entry) } rb_first needs to traverse the tree up to logN depth, rb_erase can completely reshuffle the tree. With the caching we'll skip the traversal in rb_first. That's a cached memory access vs looped pointer dereference trade-off that IMHO has a clear winner. Measurements show there's not much difference in a sample tree with 10000 nodes: 4.5s / rb_first and 4.8s / rb_first_cached. Real effects of caching and pointer chasing are unpredictable though. Further optimzations can be done to avoid the expensive rb_erase step. In some cases it's ok to process the nodes in any order, so the tree can be traversed in post-order, not rebalancing the children nodes and just calling free. Care must be taken regarding the next node. Tested-by: Holger Hoffstätte <holger@applied-asynchrony.com> Signed-off-by: Liu Bo <bo.liu@linux.alibaba.com> Reviewed-by: David Sterba <dsterba@suse.com> [ update changelog from mail discussions ] Signed-off-by: David Sterba <dsterba@suse.com>
2018-08-23 03:51:49 +08:00
WARN_ON(!RB_EMPTY_ROOT(
&transaction->delayed_refs.href_root.rb_root));
WARN_ON(!RB_EMPTY_ROOT(
&transaction->delayed_refs.dirty_extent_root));
if (transaction->delayed_refs.pending_csums)
btrfs_err(transaction->fs_info,
"pending csums is %llu",
transaction->delayed_refs.pending_csums);
/*
* If any block groups are found in ->deleted_bgs then it's
* because the transaction was aborted and a commit did not
* happen (things failed before writing the new superblock
* and calling btrfs_finish_extent_commit()), so we can not
* discard the physical locations of the block groups.
*/
while (!list_empty(&transaction->deleted_bgs)) {
struct btrfs_block_group *cache;
cache = list_first_entry(&transaction->deleted_bgs,
struct btrfs_block_group,
bg_list);
list_del_init(&cache->bg_list);
btrfs_unfreeze_block_group(cache);
btrfs_put_block_group(cache);
}
WARN_ON(!list_empty(&transaction->dev_update_list));
kfree(transaction);
}
}
static noinline void switch_commit_roots(struct btrfs_trans_handle *trans)
Btrfs: async block group caching This patch moves the caching of the block group off to a kthread in order to allow people to allocate sooner. Instead of blocking up behind the caching mutex, we instead kick of the caching kthread, and then attempt to make an allocation. If we cannot, we wait on the block groups caching waitqueue, which the caching kthread will wake the waiting threads up everytime it finds 2 meg worth of space, and then again when its finished caching. This is how I tested the speedup from this mkfs the disk mount the disk fill the disk up with fs_mark unmount the disk mount the disk time touch /mnt/foo Without my changes this took 11 seconds on my box, with these changes it now takes 1 second. Another change thats been put in place is we lock the super mirror's in the pinned extent map in order to keep us from adding that stuff as free space when caching the block group. This doesn't really change anything else as far as the pinned extent map is concerned, since for actual pinned extents we use EXTENT_DIRTY, but it does mean that when we unmount we have to go in and unlock those extents to keep from leaking memory. I've also added a check where when we are reading block groups from disk, if the amount of space used == the size of the block group, we go ahead and mark the block group as cached. This drastically reduces the amount of time it takes to cache the block groups. Using the same test as above, except doing a dd to a file and then unmounting, it used to take 33 seconds to umount, now it takes 3 seconds. This version uses the commit_root in the caching kthread, and then keeps track of how many async caching threads are running at any given time so if one of the async threads is still running as we cross transactions we can wait until its finished before handling the pinned extents. Thank you, Signed-off-by: Josef Bacik <jbacik@redhat.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-07-14 09:29:25 +08:00
{
struct btrfs_transaction *cur_trans = trans->transaction;
struct btrfs_fs_info *fs_info = trans->fs_info;
struct btrfs_root *root, *tmp;
btrfs: update last_byte_to_unpin in switch_commit_roots While writing an explanation for the need of the commit_root_sem for btrfs_prepare_extent_commit, I realized we have a slight hole that could result in leaked space if we have to do the old style caching. Consider the following scenario commit root +----+----+----+----+----+----+----+ |\\\\| |\\\\|\\\\| |\\\\|\\\\| +----+----+----+----+----+----+----+ 0 1 2 3 4 5 6 7 new commit root +----+----+----+----+----+----+----+ | | | |\\\\| | |\\\\| +----+----+----+----+----+----+----+ 0 1 2 3 4 5 6 7 Prior to this patch, we run btrfs_prepare_extent_commit, which updates the last_byte_to_unpin, and then we subsequently run switch_commit_roots. In this example lets assume that caching_ctl->progress == 1 at btrfs_prepare_extent_commit() time, which means that cache->last_byte_to_unpin == 1. Then we go and do the switch_commit_roots(), but in the meantime the caching thread has made some more progress, because we drop the commit_root_sem and re-acquired it. Now caching_ctl->progress == 3. We swap out the commit root and carry on to unpin. The race can happen like: 1) The caching thread was running using the old commit root when it found the extent for [2, 3); 2) Then it released the commit_root_sem because it was in the last item of a leaf and the semaphore was contended, and set ->progress to 3 (value of 'last'), as the last extent item in the current leaf was for the extent for range [2, 3); 3) Next time it gets the commit_root_sem, will start using the new commit root and search for a key with offset 3, so it never finds the hole for [2, 3). So the caching thread never saw [2, 3) as free space in any of the commit roots, and by the time finish_extent_commit() was called for the range [0, 3), ->last_byte_to_unpin was 1, so it only returned the subrange [0, 1) to the free space cache, skipping [2, 3). In the unpin code we have last_byte_to_unpin == 1, so we unpin [0,1), but do not unpin [2,3). However because caching_ctl->progress == 3 we do not see the newly freed section of [2,3), and thus do not add it to our free space cache. This results in us missing a chunk of free space in memory (on disk too, unless we have a power failure before writing the free space cache to disk). Fix this by making sure the ->last_byte_to_unpin is set at the same time that we swap the commit roots, this ensures that we will always be consistent. CC: stable@vger.kernel.org # 5.8+ Reviewed-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: Josef Bacik <josef@toxicpanda.com> [ update changelog with Filipe's review comments ] Signed-off-by: David Sterba <dsterba@suse.com>
2020-10-23 21:58:05 +08:00
struct btrfs_caching_control *caching_ctl, *next;
btrfs: reduce the scope of the tree log mutex during transaction commit In the transaction commit path we are acquiring the tree log mutex too early and we have a stale comment because: 1) It mentions a function named btrfs_commit_tree_roots(), which does not exists anymore, it was the old name of commit_cowonly_roots(), renamed a very long time ago by commit 5d4f98a28c7d33 ("Btrfs: Mixed back reference (FORWARD ROLLING FORMAT CHANGE)")); 2) It mentions that we need to acquire the tree log mutex at that point to ensure we have no running log writers. That is not correct anymore, for many years at least, since we are guaranteed that we do not have any log writers at that point simply because we have set the state of the transaction to TRANS_STATE_COMMIT_DOING and have waited for all writers to complete - meaning no one can log until we change the state of the transaction to TRANS_STATE_UNBLOCKED. Any attempts to join the transaction or start a new one will block until we do that state transition; 3) The comment mentions a "trans mutex" which doesn't exists since 2011, commit a4abeea41adf ("Btrfs: kill trans_mutex") removed it; 4) The current use of the tree log mutex is to ensure proper serialization of super block writes - if someone started a new transaction and uses it for logging, it will wait for the previous transaction to write its super block before writing the super block when attempting to sync the log. So acquire the tree log mutex only when it's absolutely needed, before setting the transaction state to TRANS_STATE_UNBLOCKED, fix and move the stale comment, add some assertions and new comments where appropriate. Also, this has no effect on concurrency or performance, since the new start of the critical section is still when the transaction is in the state TRANS_STATE_COMMIT_DOING. Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2021-11-10 18:05:21 +08:00
/*
* At this point no one can be using this transaction to modify any tree
* and no one can start another transaction to modify any tree either.
*/
ASSERT(cur_trans->state == TRANS_STATE_COMMIT_DOING);
down_write(&fs_info->commit_root_sem);
btrfs: make send work with concurrent block group relocation We don't allow send and balance/relocation to run in parallel in order to prevent send failing or silently producing some bad stream. This is because while send is using an extent (specially metadata) or about to read a metadata extent and expecting it belongs to a specific parent node, relocation can run, the transaction used for the relocation is committed and the extent gets reallocated while send is still using the extent, so it ends up with a different content than expected. This can result in just failing to read a metadata extent due to failure of the validation checks (parent transid, level, etc), failure to find a backreference for a data extent, and other unexpected failures. Besides reallocation, there's also a similar problem of an extent getting discarded when it's unpinned after the transaction used for block group relocation is committed. The restriction between balance and send was added in commit 9e967495e0e0 ("Btrfs: prevent send failures and crashes due to concurrent relocation"), kernel 5.3, while the more general restriction between send and relocation was added in commit 1cea5cf0e664 ("btrfs: ensure relocation never runs while we have send operations running"), kernel 5.14. Both send and relocation can be very long running operations. Relocation because it has to do a lot of IO and expensive backreference lookups in case there are many snapshots, and send due to read IO when operating on very large trees. This makes it inconvenient for users and tools to deal with scheduling both operations. For zoned filesystem we also have automatic block group relocation, so send can fail with -EAGAIN when users least expect it or send can end up delaying the block group relocation for too long. In the future we might also get the automatic block group relocation for non zoned filesystems. This change makes it possible for send and relocation to run in parallel. This is achieved the following way: 1) For all tree searches, send acquires a read lock on the commit root semaphore; 2) After each tree search, and before releasing the commit root semaphore, the leaf is cloned and placed in the search path (struct btrfs_path); 3) After releasing the commit root semaphore, the changed_cb() callback is invoked, which operates on the leaf and writes commands to the pipe (or file in case send/receive is not used with a pipe). It's important here to not hold a lock on the commit root semaphore, because if we did we could deadlock when sending and receiving to the same filesystem using a pipe - the send task blocks on the pipe because it's full, the receive task, which is the only consumer of the pipe, triggers a transaction commit when attempting to create a subvolume or reserve space for a write operation for example, but the transaction commit blocks trying to write lock the commit root semaphore, resulting in a deadlock; 4) Before moving to the next key, or advancing to the next change in case of an incremental send, check if a transaction used for relocation was committed (or is about to finish its commit). If so, release the search path(s) and restart the search, to where we were before, so that we don't operate on stale extent buffers. The search restarts are always possible because both the send and parent roots are RO, and no one can add, remove of update keys (change their offset) in RO trees - the only exception is deduplication, but that is still not allowed to run in parallel with send; 5) Periodically check if there is contention on the commit root semaphore, which means there is a transaction commit trying to write lock it, and release the semaphore and reschedule if there is contention, so as to avoid causing any significant delays to transaction commits. This leaves some room for optimizations for send to have less path releases and re searching the trees when there's relocation running, but for now it's kept simple as it performs quite well (on very large trees with resulting send streams in the order of a few hundred gigabytes). Test case btrfs/187, from fstests, stresses relocation, send and deduplication attempting to run in parallel, but without verifying if send succeeds and if it produces correct streams. A new test case will be added that exercises relocation happening in parallel with send and then checks that send succeeds and the resulting streams are correct. A final note is that for now this still leaves the mutual exclusion between send operations and deduplication on files belonging to a root used by send operations. A solution for that will be slightly more complex but it will eventually be built on top of this change. Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2021-11-22 20:03:38 +08:00
if (test_bit(BTRFS_FS_RELOC_RUNNING, &fs_info->flags))
fs_info->last_reloc_trans = trans->transid;
list_for_each_entry_safe(root, tmp, &cur_trans->switch_commits,
dirty_list) {
list_del_init(&root->dirty_list);
free_extent_buffer(root->commit_root);
root->commit_root = btrfs_root_node(root);
extent_io_tree_release(&root->dirty_log_pages);
btrfs: qgroup: Introduce per-root swapped blocks infrastructure To allow delayed subtree swap rescan, btrfs needs to record per-root information about which tree blocks get swapped. This patch introduces the required infrastructure. The designed workflow will be: 1) Record the subtree root block that gets swapped. During subtree swap: O = Old tree blocks N = New tree blocks reloc tree subvolume tree X Root Root / \ / \ NA OB OA OB / | | \ / | | \ NC ND OE OF OC OD OE OF In this case, NA and OA are going to be swapped, record (NA, OA) into subvolume tree X. 2) After subtree swap. reloc tree subvolume tree X Root Root / \ / \ OA OB NA OB / | | \ / | | \ OC OD OE OF NC ND OE OF 3a) COW happens for OB If we are going to COW tree block OB, we check OB's bytenr against tree X's swapped_blocks structure. If it doesn't fit any, nothing will happen. 3b) COW happens for NA Check NA's bytenr against tree X's swapped_blocks, and get a hit. Then we do subtree scan on both subtrees OA and NA. Resulting 6 tree blocks to be scanned (OA, OC, OD, NA, NC, ND). Then no matter what we do to subvolume tree X, qgroup numbers will still be correct. Then NA's record gets removed from X's swapped_blocks. 4) Transaction commit Any record in X's swapped_blocks gets removed, since there is no modification to swapped subtrees, no need to trigger heavy qgroup subtree rescan for them. This will introduce 128 bytes overhead for each btrfs_root even qgroup is not enabled. This is to reduce memory allocations and potential failures. Signed-off-by: Qu Wenruo <wqu@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2019-01-23 15:15:16 +08:00
btrfs_qgroup_clean_swapped_blocks(root);
}
/* We can free old roots now. */
spin_lock(&cur_trans->dropped_roots_lock);
while (!list_empty(&cur_trans->dropped_roots)) {
root = list_first_entry(&cur_trans->dropped_roots,
struct btrfs_root, root_list);
list_del_init(&root->root_list);
spin_unlock(&cur_trans->dropped_roots_lock);
btrfs_free_log(trans, root);
btrfs_drop_and_free_fs_root(fs_info, root);
spin_lock(&cur_trans->dropped_roots_lock);
}
spin_unlock(&cur_trans->dropped_roots_lock);
btrfs: update last_byte_to_unpin in switch_commit_roots While writing an explanation for the need of the commit_root_sem for btrfs_prepare_extent_commit, I realized we have a slight hole that could result in leaked space if we have to do the old style caching. Consider the following scenario commit root +----+----+----+----+----+----+----+ |\\\\| |\\\\|\\\\| |\\\\|\\\\| +----+----+----+----+----+----+----+ 0 1 2 3 4 5 6 7 new commit root +----+----+----+----+----+----+----+ | | | |\\\\| | |\\\\| +----+----+----+----+----+----+----+ 0 1 2 3 4 5 6 7 Prior to this patch, we run btrfs_prepare_extent_commit, which updates the last_byte_to_unpin, and then we subsequently run switch_commit_roots. In this example lets assume that caching_ctl->progress == 1 at btrfs_prepare_extent_commit() time, which means that cache->last_byte_to_unpin == 1. Then we go and do the switch_commit_roots(), but in the meantime the caching thread has made some more progress, because we drop the commit_root_sem and re-acquired it. Now caching_ctl->progress == 3. We swap out the commit root and carry on to unpin. The race can happen like: 1) The caching thread was running using the old commit root when it found the extent for [2, 3); 2) Then it released the commit_root_sem because it was in the last item of a leaf and the semaphore was contended, and set ->progress to 3 (value of 'last'), as the last extent item in the current leaf was for the extent for range [2, 3); 3) Next time it gets the commit_root_sem, will start using the new commit root and search for a key with offset 3, so it never finds the hole for [2, 3). So the caching thread never saw [2, 3) as free space in any of the commit roots, and by the time finish_extent_commit() was called for the range [0, 3), ->last_byte_to_unpin was 1, so it only returned the subrange [0, 1) to the free space cache, skipping [2, 3). In the unpin code we have last_byte_to_unpin == 1, so we unpin [0,1), but do not unpin [2,3). However because caching_ctl->progress == 3 we do not see the newly freed section of [2,3), and thus do not add it to our free space cache. This results in us missing a chunk of free space in memory (on disk too, unless we have a power failure before writing the free space cache to disk). Fix this by making sure the ->last_byte_to_unpin is set at the same time that we swap the commit roots, this ensures that we will always be consistent. CC: stable@vger.kernel.org # 5.8+ Reviewed-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: Josef Bacik <josef@toxicpanda.com> [ update changelog with Filipe's review comments ] Signed-off-by: David Sterba <dsterba@suse.com>
2020-10-23 21:58:05 +08:00
/*
* We have to update the last_byte_to_unpin under the commit_root_sem,
* at the same time we swap out the commit roots.
*
* This is because we must have a real view of the last spot the caching
* kthreads were while caching. Consider the following views of the
* extent tree for a block group
*
* commit root
* +----+----+----+----+----+----+----+
* |\\\\| |\\\\|\\\\| |\\\\|\\\\|
* +----+----+----+----+----+----+----+
* 0 1 2 3 4 5 6 7
*
* new commit root
* +----+----+----+----+----+----+----+
* | | | |\\\\| | |\\\\|
* +----+----+----+----+----+----+----+
* 0 1 2 3 4 5 6 7
*
* If the cache_ctl->progress was at 3, then we are only allowed to
* unpin [0,1) and [2,3], because the caching thread has already
* processed those extents. We are not allowed to unpin [5,6), because
* the caching thread will re-start it's search from 3, and thus find
* the hole from [4,6) to add to the free space cache.
*/
btrfs: protect fs_info->caching_block_groups by block_group_cache_lock I got the following lockdep splat ====================================================== WARNING: possible circular locking dependency detected 5.9.0+ #101 Not tainted ------------------------------------------------------ btrfs-cleaner/3445 is trying to acquire lock: ffff89dbec39ab48 (btrfs-root-00){++++}-{3:3}, at: __btrfs_tree_read_lock+0x32/0x170 but task is already holding lock: ffff89dbeaf28a88 (&fs_info->commit_root_sem){++++}-{3:3}, at: btrfs_find_all_roots+0x41/0x80 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #2 (&fs_info->commit_root_sem){++++}-{3:3}: down_write+0x3d/0x70 btrfs_cache_block_group+0x2d5/0x510 find_free_extent+0xb6e/0x12f0 btrfs_reserve_extent+0xb3/0x1b0 btrfs_alloc_tree_block+0xb1/0x330 alloc_tree_block_no_bg_flush+0x4f/0x60 __btrfs_cow_block+0x11d/0x580 btrfs_cow_block+0x10c/0x220 commit_cowonly_roots+0x47/0x2e0 btrfs_commit_transaction+0x595/0xbd0 sync_filesystem+0x74/0x90 generic_shutdown_super+0x22/0x100 kill_anon_super+0x14/0x30 btrfs_kill_super+0x12/0x20 deactivate_locked_super+0x36/0xa0 cleanup_mnt+0x12d/0x190 task_work_run+0x5c/0xa0 exit_to_user_mode_prepare+0x1df/0x200 syscall_exit_to_user_mode+0x54/0x280 entry_SYSCALL_64_after_hwframe+0x44/0xa9 -> #1 (&space_info->groups_sem){++++}-{3:3}: down_read+0x40/0x130 find_free_extent+0x2ed/0x12f0 btrfs_reserve_extent+0xb3/0x1b0 btrfs_alloc_tree_block+0xb1/0x330 alloc_tree_block_no_bg_flush+0x4f/0x60 __btrfs_cow_block+0x11d/0x580 btrfs_cow_block+0x10c/0x220 commit_cowonly_roots+0x47/0x2e0 btrfs_commit_transaction+0x595/0xbd0 sync_filesystem+0x74/0x90 generic_shutdown_super+0x22/0x100 kill_anon_super+0x14/0x30 btrfs_kill_super+0x12/0x20 deactivate_locked_super+0x36/0xa0 cleanup_mnt+0x12d/0x190 task_work_run+0x5c/0xa0 exit_to_user_mode_prepare+0x1df/0x200 syscall_exit_to_user_mode+0x54/0x280 entry_SYSCALL_64_after_hwframe+0x44/0xa9 -> #0 (btrfs-root-00){++++}-{3:3}: __lock_acquire+0x1167/0x2150 lock_acquire+0xb9/0x3d0 down_read_nested+0x43/0x130 __btrfs_tree_read_lock+0x32/0x170 __btrfs_read_lock_root_node+0x3a/0x50 btrfs_search_slot+0x614/0x9d0 btrfs_find_root+0x35/0x1b0 btrfs_read_tree_root+0x61/0x120 btrfs_get_root_ref+0x14b/0x600 find_parent_nodes+0x3e6/0x1b30 btrfs_find_all_roots_safe+0xb4/0x130 btrfs_find_all_roots+0x60/0x80 btrfs_qgroup_trace_extent_post+0x27/0x40 btrfs_add_delayed_data_ref+0x3fd/0x460 btrfs_free_extent+0x42/0x100 __btrfs_mod_ref+0x1d7/0x2f0 walk_up_proc+0x11c/0x400 walk_up_tree+0xf0/0x180 btrfs_drop_snapshot+0x1c7/0x780 btrfs_clean_one_deleted_snapshot+0xfb/0x110 cleaner_kthread+0xd4/0x140 kthread+0x13a/0x150 ret_from_fork+0x1f/0x30 other info that might help us debug this: Chain exists of: btrfs-root-00 --> &space_info->groups_sem --> &fs_info->commit_root_sem Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&fs_info->commit_root_sem); lock(&space_info->groups_sem); lock(&fs_info->commit_root_sem); lock(btrfs-root-00); *** DEADLOCK *** 3 locks held by btrfs-cleaner/3445: #0: ffff89dbeaf28838 (&fs_info->cleaner_mutex){+.+.}-{3:3}, at: cleaner_kthread+0x6e/0x140 #1: ffff89dbeb6c7640 (sb_internal){.+.+}-{0:0}, at: start_transaction+0x40b/0x5c0 #2: ffff89dbeaf28a88 (&fs_info->commit_root_sem){++++}-{3:3}, at: btrfs_find_all_roots+0x41/0x80 stack backtrace: CPU: 0 PID: 3445 Comm: btrfs-cleaner Not tainted 5.9.0+ #101 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-2.fc32 04/01/2014 Call Trace: dump_stack+0x8b/0xb0 check_noncircular+0xcf/0xf0 __lock_acquire+0x1167/0x2150 ? __bfs+0x42/0x210 lock_acquire+0xb9/0x3d0 ? __btrfs_tree_read_lock+0x32/0x170 down_read_nested+0x43/0x130 ? __btrfs_tree_read_lock+0x32/0x170 __btrfs_tree_read_lock+0x32/0x170 __btrfs_read_lock_root_node+0x3a/0x50 btrfs_search_slot+0x614/0x9d0 ? find_held_lock+0x2b/0x80 btrfs_find_root+0x35/0x1b0 ? do_raw_spin_unlock+0x4b/0xa0 btrfs_read_tree_root+0x61/0x120 btrfs_get_root_ref+0x14b/0x600 find_parent_nodes+0x3e6/0x1b30 btrfs_find_all_roots_safe+0xb4/0x130 btrfs_find_all_roots+0x60/0x80 btrfs_qgroup_trace_extent_post+0x27/0x40 btrfs_add_delayed_data_ref+0x3fd/0x460 btrfs_free_extent+0x42/0x100 __btrfs_mod_ref+0x1d7/0x2f0 walk_up_proc+0x11c/0x400 walk_up_tree+0xf0/0x180 btrfs_drop_snapshot+0x1c7/0x780 ? btrfs_clean_one_deleted_snapshot+0x73/0x110 btrfs_clean_one_deleted_snapshot+0xfb/0x110 cleaner_kthread+0xd4/0x140 ? btrfs_alloc_root+0x50/0x50 kthread+0x13a/0x150 ? kthread_create_worker_on_cpu+0x40/0x40 ret_from_fork+0x1f/0x30 while testing another lockdep fix. This happens because we're using the commit_root_sem to protect fs_info->caching_block_groups, which creates a dependency on the groups_sem -> commit_root_sem, which is problematic because we will allocate blocks while holding tree roots. Fix this by making the list itself protected by the fs_info->block_group_cache_lock. Reviewed-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: David Sterba <dsterba@suse.com>
2020-10-23 21:58:11 +08:00
spin_lock(&fs_info->block_group_cache_lock);
btrfs: update last_byte_to_unpin in switch_commit_roots While writing an explanation for the need of the commit_root_sem for btrfs_prepare_extent_commit, I realized we have a slight hole that could result in leaked space if we have to do the old style caching. Consider the following scenario commit root +----+----+----+----+----+----+----+ |\\\\| |\\\\|\\\\| |\\\\|\\\\| +----+----+----+----+----+----+----+ 0 1 2 3 4 5 6 7 new commit root +----+----+----+----+----+----+----+ | | | |\\\\| | |\\\\| +----+----+----+----+----+----+----+ 0 1 2 3 4 5 6 7 Prior to this patch, we run btrfs_prepare_extent_commit, which updates the last_byte_to_unpin, and then we subsequently run switch_commit_roots. In this example lets assume that caching_ctl->progress == 1 at btrfs_prepare_extent_commit() time, which means that cache->last_byte_to_unpin == 1. Then we go and do the switch_commit_roots(), but in the meantime the caching thread has made some more progress, because we drop the commit_root_sem and re-acquired it. Now caching_ctl->progress == 3. We swap out the commit root and carry on to unpin. The race can happen like: 1) The caching thread was running using the old commit root when it found the extent for [2, 3); 2) Then it released the commit_root_sem because it was in the last item of a leaf and the semaphore was contended, and set ->progress to 3 (value of 'last'), as the last extent item in the current leaf was for the extent for range [2, 3); 3) Next time it gets the commit_root_sem, will start using the new commit root and search for a key with offset 3, so it never finds the hole for [2, 3). So the caching thread never saw [2, 3) as free space in any of the commit roots, and by the time finish_extent_commit() was called for the range [0, 3), ->last_byte_to_unpin was 1, so it only returned the subrange [0, 1) to the free space cache, skipping [2, 3). In the unpin code we have last_byte_to_unpin == 1, so we unpin [0,1), but do not unpin [2,3). However because caching_ctl->progress == 3 we do not see the newly freed section of [2,3), and thus do not add it to our free space cache. This results in us missing a chunk of free space in memory (on disk too, unless we have a power failure before writing the free space cache to disk). Fix this by making sure the ->last_byte_to_unpin is set at the same time that we swap the commit roots, this ensures that we will always be consistent. CC: stable@vger.kernel.org # 5.8+ Reviewed-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: Josef Bacik <josef@toxicpanda.com> [ update changelog with Filipe's review comments ] Signed-off-by: David Sterba <dsterba@suse.com>
2020-10-23 21:58:05 +08:00
list_for_each_entry_safe(caching_ctl, next,
&fs_info->caching_block_groups, list) {
struct btrfs_block_group *cache = caching_ctl->block_group;
if (btrfs_block_group_done(cache)) {
cache->last_byte_to_unpin = (u64)-1;
list_del_init(&caching_ctl->list);
btrfs_put_caching_control(caching_ctl);
} else {
cache->last_byte_to_unpin = caching_ctl->progress;
}
}
btrfs: protect fs_info->caching_block_groups by block_group_cache_lock I got the following lockdep splat ====================================================== WARNING: possible circular locking dependency detected 5.9.0+ #101 Not tainted ------------------------------------------------------ btrfs-cleaner/3445 is trying to acquire lock: ffff89dbec39ab48 (btrfs-root-00){++++}-{3:3}, at: __btrfs_tree_read_lock+0x32/0x170 but task is already holding lock: ffff89dbeaf28a88 (&fs_info->commit_root_sem){++++}-{3:3}, at: btrfs_find_all_roots+0x41/0x80 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #2 (&fs_info->commit_root_sem){++++}-{3:3}: down_write+0x3d/0x70 btrfs_cache_block_group+0x2d5/0x510 find_free_extent+0xb6e/0x12f0 btrfs_reserve_extent+0xb3/0x1b0 btrfs_alloc_tree_block+0xb1/0x330 alloc_tree_block_no_bg_flush+0x4f/0x60 __btrfs_cow_block+0x11d/0x580 btrfs_cow_block+0x10c/0x220 commit_cowonly_roots+0x47/0x2e0 btrfs_commit_transaction+0x595/0xbd0 sync_filesystem+0x74/0x90 generic_shutdown_super+0x22/0x100 kill_anon_super+0x14/0x30 btrfs_kill_super+0x12/0x20 deactivate_locked_super+0x36/0xa0 cleanup_mnt+0x12d/0x190 task_work_run+0x5c/0xa0 exit_to_user_mode_prepare+0x1df/0x200 syscall_exit_to_user_mode+0x54/0x280 entry_SYSCALL_64_after_hwframe+0x44/0xa9 -> #1 (&space_info->groups_sem){++++}-{3:3}: down_read+0x40/0x130 find_free_extent+0x2ed/0x12f0 btrfs_reserve_extent+0xb3/0x1b0 btrfs_alloc_tree_block+0xb1/0x330 alloc_tree_block_no_bg_flush+0x4f/0x60 __btrfs_cow_block+0x11d/0x580 btrfs_cow_block+0x10c/0x220 commit_cowonly_roots+0x47/0x2e0 btrfs_commit_transaction+0x595/0xbd0 sync_filesystem+0x74/0x90 generic_shutdown_super+0x22/0x100 kill_anon_super+0x14/0x30 btrfs_kill_super+0x12/0x20 deactivate_locked_super+0x36/0xa0 cleanup_mnt+0x12d/0x190 task_work_run+0x5c/0xa0 exit_to_user_mode_prepare+0x1df/0x200 syscall_exit_to_user_mode+0x54/0x280 entry_SYSCALL_64_after_hwframe+0x44/0xa9 -> #0 (btrfs-root-00){++++}-{3:3}: __lock_acquire+0x1167/0x2150 lock_acquire+0xb9/0x3d0 down_read_nested+0x43/0x130 __btrfs_tree_read_lock+0x32/0x170 __btrfs_read_lock_root_node+0x3a/0x50 btrfs_search_slot+0x614/0x9d0 btrfs_find_root+0x35/0x1b0 btrfs_read_tree_root+0x61/0x120 btrfs_get_root_ref+0x14b/0x600 find_parent_nodes+0x3e6/0x1b30 btrfs_find_all_roots_safe+0xb4/0x130 btrfs_find_all_roots+0x60/0x80 btrfs_qgroup_trace_extent_post+0x27/0x40 btrfs_add_delayed_data_ref+0x3fd/0x460 btrfs_free_extent+0x42/0x100 __btrfs_mod_ref+0x1d7/0x2f0 walk_up_proc+0x11c/0x400 walk_up_tree+0xf0/0x180 btrfs_drop_snapshot+0x1c7/0x780 btrfs_clean_one_deleted_snapshot+0xfb/0x110 cleaner_kthread+0xd4/0x140 kthread+0x13a/0x150 ret_from_fork+0x1f/0x30 other info that might help us debug this: Chain exists of: btrfs-root-00 --> &space_info->groups_sem --> &fs_info->commit_root_sem Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&fs_info->commit_root_sem); lock(&space_info->groups_sem); lock(&fs_info->commit_root_sem); lock(btrfs-root-00); *** DEADLOCK *** 3 locks held by btrfs-cleaner/3445: #0: ffff89dbeaf28838 (&fs_info->cleaner_mutex){+.+.}-{3:3}, at: cleaner_kthread+0x6e/0x140 #1: ffff89dbeb6c7640 (sb_internal){.+.+}-{0:0}, at: start_transaction+0x40b/0x5c0 #2: ffff89dbeaf28a88 (&fs_info->commit_root_sem){++++}-{3:3}, at: btrfs_find_all_roots+0x41/0x80 stack backtrace: CPU: 0 PID: 3445 Comm: btrfs-cleaner Not tainted 5.9.0+ #101 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-2.fc32 04/01/2014 Call Trace: dump_stack+0x8b/0xb0 check_noncircular+0xcf/0xf0 __lock_acquire+0x1167/0x2150 ? __bfs+0x42/0x210 lock_acquire+0xb9/0x3d0 ? __btrfs_tree_read_lock+0x32/0x170 down_read_nested+0x43/0x130 ? __btrfs_tree_read_lock+0x32/0x170 __btrfs_tree_read_lock+0x32/0x170 __btrfs_read_lock_root_node+0x3a/0x50 btrfs_search_slot+0x614/0x9d0 ? find_held_lock+0x2b/0x80 btrfs_find_root+0x35/0x1b0 ? do_raw_spin_unlock+0x4b/0xa0 btrfs_read_tree_root+0x61/0x120 btrfs_get_root_ref+0x14b/0x600 find_parent_nodes+0x3e6/0x1b30 btrfs_find_all_roots_safe+0xb4/0x130 btrfs_find_all_roots+0x60/0x80 btrfs_qgroup_trace_extent_post+0x27/0x40 btrfs_add_delayed_data_ref+0x3fd/0x460 btrfs_free_extent+0x42/0x100 __btrfs_mod_ref+0x1d7/0x2f0 walk_up_proc+0x11c/0x400 walk_up_tree+0xf0/0x180 btrfs_drop_snapshot+0x1c7/0x780 ? btrfs_clean_one_deleted_snapshot+0x73/0x110 btrfs_clean_one_deleted_snapshot+0xfb/0x110 cleaner_kthread+0xd4/0x140 ? btrfs_alloc_root+0x50/0x50 kthread+0x13a/0x150 ? kthread_create_worker_on_cpu+0x40/0x40 ret_from_fork+0x1f/0x30 while testing another lockdep fix. This happens because we're using the commit_root_sem to protect fs_info->caching_block_groups, which creates a dependency on the groups_sem -> commit_root_sem, which is problematic because we will allocate blocks while holding tree roots. Fix this by making the list itself protected by the fs_info->block_group_cache_lock. Reviewed-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: David Sterba <dsterba@suse.com>
2020-10-23 21:58:11 +08:00
spin_unlock(&fs_info->block_group_cache_lock);
up_write(&fs_info->commit_root_sem);
Btrfs: async block group caching This patch moves the caching of the block group off to a kthread in order to allow people to allocate sooner. Instead of blocking up behind the caching mutex, we instead kick of the caching kthread, and then attempt to make an allocation. If we cannot, we wait on the block groups caching waitqueue, which the caching kthread will wake the waiting threads up everytime it finds 2 meg worth of space, and then again when its finished caching. This is how I tested the speedup from this mkfs the disk mount the disk fill the disk up with fs_mark unmount the disk mount the disk time touch /mnt/foo Without my changes this took 11 seconds on my box, with these changes it now takes 1 second. Another change thats been put in place is we lock the super mirror's in the pinned extent map in order to keep us from adding that stuff as free space when caching the block group. This doesn't really change anything else as far as the pinned extent map is concerned, since for actual pinned extents we use EXTENT_DIRTY, but it does mean that when we unmount we have to go in and unlock those extents to keep from leaking memory. I've also added a check where when we are reading block groups from disk, if the amount of space used == the size of the block group, we go ahead and mark the block group as cached. This drastically reduces the amount of time it takes to cache the block groups. Using the same test as above, except doing a dd to a file and then unmounting, it used to take 33 seconds to umount, now it takes 3 seconds. This version uses the commit_root in the caching kthread, and then keeps track of how many async caching threads are running at any given time so if one of the async threads is still running as we cross transactions we can wait until its finished before handling the pinned extents. Thank you, Signed-off-by: Josef Bacik <jbacik@redhat.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-07-14 09:29:25 +08:00
}
static inline void extwriter_counter_inc(struct btrfs_transaction *trans,
unsigned int type)
{
if (type & TRANS_EXTWRITERS)
atomic_inc(&trans->num_extwriters);
}
static inline void extwriter_counter_dec(struct btrfs_transaction *trans,
unsigned int type)
{
if (type & TRANS_EXTWRITERS)
atomic_dec(&trans->num_extwriters);
}
static inline void extwriter_counter_init(struct btrfs_transaction *trans,
unsigned int type)
{
atomic_set(&trans->num_extwriters, ((type & TRANS_EXTWRITERS) ? 1 : 0));
}
static inline int extwriter_counter_read(struct btrfs_transaction *trans)
{
return atomic_read(&trans->num_extwriters);
}
/*
btrfs: rework chunk allocation to avoid exhaustion of the system chunk array Commit eafa4fd0ad0607 ("btrfs: fix exhaustion of the system chunk array due to concurrent allocations") fixed a problem that resulted in exhausting the system chunk array in the superblock when there are many tasks allocating chunks in parallel. Basically too many tasks enter the first phase of chunk allocation without previous tasks having finished their second phase of allocation, resulting in too many system chunks being allocated. That was originally observed when running the fallocate tests of stress-ng on a PowerPC machine, using a node size of 64K. However that commit also introduced a deadlock where a task in phase 1 of the chunk allocation waited for another task that had allocated a system chunk to finish its phase 2, but that other task was waiting on an extent buffer lock held by the first task, therefore resulting in both tasks not making any progress. That change was later reverted by a patch with the subject "btrfs: fix deadlock with concurrent chunk allocations involving system chunks", since there is no simple and short solution to address it and the deadlock is relatively easy to trigger on zoned filesystems, while the system chunk array exhaustion is not so common. This change reworks the chunk allocation to avoid the system chunk array exhaustion. It accomplishes that by making the first phase of chunk allocation do the updates of the device items in the chunk btree and the insertion of the new chunk item in the chunk btree. This is done while under the protection of the chunk mutex (fs_info->chunk_mutex), in the same critical section that checks for available system space, allocates a new system chunk if needed and reserves system chunk space. This way we do not have chunk space reserved until the second phase completes. The same logic is applied to chunk removal as well, since it keeps reserved system space long after it is done updating the chunk btree. For direct allocation of system chunks, the previous behaviour remains, because otherwise we would deadlock on extent buffers of the chunk btree. Changes to the chunk btree are by large done by chunk allocation and chunk removal, which first reserve chunk system space and then later do changes to the chunk btree. The other remaining cases are uncommon and correspond to adding a device, removing a device and resizing a device. All these other cases do not pre-reserve system space, they modify the chunk btree right away, so they don't hold reserved space for a long period like chunk allocation and chunk removal do. The diff of this change is huge, but more than half of it is just addition of comments describing both how things work regarding chunk allocation and removal, including both the new behavior and the parts of the old behavior that did not change. CC: stable@vger.kernel.org # 5.12+ Tested-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com> Tested-by: Naohiro Aota <naohiro.aota@wdc.com> Signed-off-by: Filipe Manana <fdmanana@suse.com> Tested-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2021-06-29 21:43:06 +08:00
* To be called after doing the chunk btree updates right after allocating a new
* chunk (after btrfs_chunk_alloc_add_chunk_item() is called), when removing a
* chunk after all chunk btree updates and after finishing the second phase of
* chunk allocation (btrfs_create_pending_block_groups()) in case some block
* group had its chunk item insertion delayed to the second phase.
*/
void btrfs_trans_release_chunk_metadata(struct btrfs_trans_handle *trans)
{
struct btrfs_fs_info *fs_info = trans->fs_info;
if (!trans->chunk_bytes_reserved)
return;
btrfs_block_rsv_release(fs_info, &fs_info->chunk_block_rsv,
trans->chunk_bytes_reserved, NULL);
trans->chunk_bytes_reserved = 0;
}
/*
* either allocate a new transaction or hop into the existing one
*/
static noinline int join_transaction(struct btrfs_fs_info *fs_info,
unsigned int type)
{
struct btrfs_transaction *cur_trans;
Btrfs: kill trans_mutex We use trans_mutex for lots of things, here's a basic list 1) To serialize trans_handles joining the currently running transaction 2) To make sure that no new trans handles are started while we are committing 3) To protect the dead_roots list and the transaction lists Really the serializing trans_handles joining is not too hard, and can really get bogged down in acquiring a reference to the transaction. So replace the trans_mutex with a trans_lock spinlock and use it to do the following 1) Protect fs_info->running_transaction. All trans handles have to do is check this, and then take a reference of the transaction and keep on going. 2) Protect the fs_info->trans_list. This doesn't get used too much, basically it just holds the current transactions, which will usually just be the currently committing transaction and the currently running transaction at most. 3) Protect the dead roots list. This is only ever processed by splicing the list so this is relatively simple. 4) Protect the fs_info->reloc_ctl stuff. This is very lightweight and was using the trans_mutex before, so this is a pretty straightforward change. 5) Protect fs_info->no_trans_join. Because we don't hold the trans_lock over the entirety of the commit we need to have a way to block new people from creating a new transaction while we're doing our work. So we set no_trans_join and in join_transaction we test to see if that is set, and if it is we do a wait_on_commit. 6) Make the transaction use count atomic so we don't need to take locks to modify it when we're dropping references. 7) Add a commit_lock to the transaction to make sure multiple people trying to commit the same transaction don't race and commit at the same time. 8) Make open_ioctl_trans an atomic so we don't have to take any locks for ioctl trans. I have tested this with xfstests, but obviously it is a pretty hairy change so lots of testing is greatly appreciated. Thanks, Signed-off-by: Josef Bacik <josef@redhat.com>
2011-04-12 05:25:13 +08:00
spin_lock(&fs_info->trans_lock);
loop:
/* The file system has been taken offline. No new transactions. */
if (BTRFS_FS_ERROR(fs_info)) {
spin_unlock(&fs_info->trans_lock);
return -EROFS;
}
cur_trans = fs_info->running_transaction;
Btrfs: kill trans_mutex We use trans_mutex for lots of things, here's a basic list 1) To serialize trans_handles joining the currently running transaction 2) To make sure that no new trans handles are started while we are committing 3) To protect the dead_roots list and the transaction lists Really the serializing trans_handles joining is not too hard, and can really get bogged down in acquiring a reference to the transaction. So replace the trans_mutex with a trans_lock spinlock and use it to do the following 1) Protect fs_info->running_transaction. All trans handles have to do is check this, and then take a reference of the transaction and keep on going. 2) Protect the fs_info->trans_list. This doesn't get used too much, basically it just holds the current transactions, which will usually just be the currently committing transaction and the currently running transaction at most. 3) Protect the dead roots list. This is only ever processed by splicing the list so this is relatively simple. 4) Protect the fs_info->reloc_ctl stuff. This is very lightweight and was using the trans_mutex before, so this is a pretty straightforward change. 5) Protect fs_info->no_trans_join. Because we don't hold the trans_lock over the entirety of the commit we need to have a way to block new people from creating a new transaction while we're doing our work. So we set no_trans_join and in join_transaction we test to see if that is set, and if it is we do a wait_on_commit. 6) Make the transaction use count atomic so we don't need to take locks to modify it when we're dropping references. 7) Add a commit_lock to the transaction to make sure multiple people trying to commit the same transaction don't race and commit at the same time. 8) Make open_ioctl_trans an atomic so we don't have to take any locks for ioctl trans. I have tested this with xfstests, but obviously it is a pretty hairy change so lots of testing is greatly appreciated. Thanks, Signed-off-by: Josef Bacik <josef@redhat.com>
2011-04-12 05:25:13 +08:00
if (cur_trans) {
if (TRANS_ABORTED(cur_trans)) {
spin_unlock(&fs_info->trans_lock);
return cur_trans->aborted;
}
Btrfs: make the state of the transaction more readable We used 3 variants to track the state of the transaction, it was complex and wasted the memory space. Besides that, it was hard to understand that which types of the transaction handles should be blocked in each transaction state, so the developers often made mistakes. This patch improved the above problem. In this patch, we define 6 states for the transaction, enum btrfs_trans_state { TRANS_STATE_RUNNING = 0, TRANS_STATE_BLOCKED = 1, TRANS_STATE_COMMIT_START = 2, TRANS_STATE_COMMIT_DOING = 3, TRANS_STATE_UNBLOCKED = 4, TRANS_STATE_COMPLETED = 5, TRANS_STATE_MAX = 6, } and just use 1 variant to track those state. In order to make the blocked handle types for each state more clear, we introduce a array: unsigned int btrfs_blocked_trans_types[TRANS_STATE_MAX] = { [TRANS_STATE_RUNNING] = 0U, [TRANS_STATE_BLOCKED] = (__TRANS_USERSPACE | __TRANS_START), [TRANS_STATE_COMMIT_START] = (__TRANS_USERSPACE | __TRANS_START | __TRANS_ATTACH), [TRANS_STATE_COMMIT_DOING] = (__TRANS_USERSPACE | __TRANS_START | __TRANS_ATTACH | __TRANS_JOIN), [TRANS_STATE_UNBLOCKED] = (__TRANS_USERSPACE | __TRANS_START | __TRANS_ATTACH | __TRANS_JOIN | __TRANS_JOIN_NOLOCK), [TRANS_STATE_COMPLETED] = (__TRANS_USERSPACE | __TRANS_START | __TRANS_ATTACH | __TRANS_JOIN | __TRANS_JOIN_NOLOCK), } it is very intuitionistic. Besides that, because we remove ->in_commit in transaction structure, so the lock ->commit_lock which was used to protect it is unnecessary, remove ->commit_lock. Signed-off-by: Miao Xie <miaox@cn.fujitsu.com> Signed-off-by: Josef Bacik <jbacik@fusionio.com>
2013-05-17 11:53:43 +08:00
if (btrfs_blocked_trans_types[cur_trans->state] & type) {
spin_unlock(&fs_info->trans_lock);
return -EBUSY;
}
refcount_inc(&cur_trans->use_count);
atomic_inc(&cur_trans->num_writers);
extwriter_counter_inc(cur_trans, type);
spin_unlock(&fs_info->trans_lock);
Btrfs: kill trans_mutex We use trans_mutex for lots of things, here's a basic list 1) To serialize trans_handles joining the currently running transaction 2) To make sure that no new trans handles are started while we are committing 3) To protect the dead_roots list and the transaction lists Really the serializing trans_handles joining is not too hard, and can really get bogged down in acquiring a reference to the transaction. So replace the trans_mutex with a trans_lock spinlock and use it to do the following 1) Protect fs_info->running_transaction. All trans handles have to do is check this, and then take a reference of the transaction and keep on going. 2) Protect the fs_info->trans_list. This doesn't get used too much, basically it just holds the current transactions, which will usually just be the currently committing transaction and the currently running transaction at most. 3) Protect the dead roots list. This is only ever processed by splicing the list so this is relatively simple. 4) Protect the fs_info->reloc_ctl stuff. This is very lightweight and was using the trans_mutex before, so this is a pretty straightforward change. 5) Protect fs_info->no_trans_join. Because we don't hold the trans_lock over the entirety of the commit we need to have a way to block new people from creating a new transaction while we're doing our work. So we set no_trans_join and in join_transaction we test to see if that is set, and if it is we do a wait_on_commit. 6) Make the transaction use count atomic so we don't need to take locks to modify it when we're dropping references. 7) Add a commit_lock to the transaction to make sure multiple people trying to commit the same transaction don't race and commit at the same time. 8) Make open_ioctl_trans an atomic so we don't have to take any locks for ioctl trans. I have tested this with xfstests, but obviously it is a pretty hairy change so lots of testing is greatly appreciated. Thanks, Signed-off-by: Josef Bacik <josef@redhat.com>
2011-04-12 05:25:13 +08:00
return 0;
}
spin_unlock(&fs_info->trans_lock);
Btrfs: kill trans_mutex We use trans_mutex for lots of things, here's a basic list 1) To serialize trans_handles joining the currently running transaction 2) To make sure that no new trans handles are started while we are committing 3) To protect the dead_roots list and the transaction lists Really the serializing trans_handles joining is not too hard, and can really get bogged down in acquiring a reference to the transaction. So replace the trans_mutex with a trans_lock spinlock and use it to do the following 1) Protect fs_info->running_transaction. All trans handles have to do is check this, and then take a reference of the transaction and keep on going. 2) Protect the fs_info->trans_list. This doesn't get used too much, basically it just holds the current transactions, which will usually just be the currently committing transaction and the currently running transaction at most. 3) Protect the dead roots list. This is only ever processed by splicing the list so this is relatively simple. 4) Protect the fs_info->reloc_ctl stuff. This is very lightweight and was using the trans_mutex before, so this is a pretty straightforward change. 5) Protect fs_info->no_trans_join. Because we don't hold the trans_lock over the entirety of the commit we need to have a way to block new people from creating a new transaction while we're doing our work. So we set no_trans_join and in join_transaction we test to see if that is set, and if it is we do a wait_on_commit. 6) Make the transaction use count atomic so we don't need to take locks to modify it when we're dropping references. 7) Add a commit_lock to the transaction to make sure multiple people trying to commit the same transaction don't race and commit at the same time. 8) Make open_ioctl_trans an atomic so we don't have to take any locks for ioctl trans. I have tested this with xfstests, but obviously it is a pretty hairy change so lots of testing is greatly appreciated. Thanks, Signed-off-by: Josef Bacik <josef@redhat.com>
2011-04-12 05:25:13 +08:00
/*
* If we are ATTACH, we just want to catch the current transaction,
* and commit it. If there is no transaction, just return ENOENT.
*/
if (type == TRANS_ATTACH)
return -ENOENT;
Btrfs: make the state of the transaction more readable We used 3 variants to track the state of the transaction, it was complex and wasted the memory space. Besides that, it was hard to understand that which types of the transaction handles should be blocked in each transaction state, so the developers often made mistakes. This patch improved the above problem. In this patch, we define 6 states for the transaction, enum btrfs_trans_state { TRANS_STATE_RUNNING = 0, TRANS_STATE_BLOCKED = 1, TRANS_STATE_COMMIT_START = 2, TRANS_STATE_COMMIT_DOING = 3, TRANS_STATE_UNBLOCKED = 4, TRANS_STATE_COMPLETED = 5, TRANS_STATE_MAX = 6, } and just use 1 variant to track those state. In order to make the blocked handle types for each state more clear, we introduce a array: unsigned int btrfs_blocked_trans_types[TRANS_STATE_MAX] = { [TRANS_STATE_RUNNING] = 0U, [TRANS_STATE_BLOCKED] = (__TRANS_USERSPACE | __TRANS_START), [TRANS_STATE_COMMIT_START] = (__TRANS_USERSPACE | __TRANS_START | __TRANS_ATTACH), [TRANS_STATE_COMMIT_DOING] = (__TRANS_USERSPACE | __TRANS_START | __TRANS_ATTACH | __TRANS_JOIN), [TRANS_STATE_UNBLOCKED] = (__TRANS_USERSPACE | __TRANS_START | __TRANS_ATTACH | __TRANS_JOIN | __TRANS_JOIN_NOLOCK), [TRANS_STATE_COMPLETED] = (__TRANS_USERSPACE | __TRANS_START | __TRANS_ATTACH | __TRANS_JOIN | __TRANS_JOIN_NOLOCK), } it is very intuitionistic. Besides that, because we remove ->in_commit in transaction structure, so the lock ->commit_lock which was used to protect it is unnecessary, remove ->commit_lock. Signed-off-by: Miao Xie <miaox@cn.fujitsu.com> Signed-off-by: Josef Bacik <jbacik@fusionio.com>
2013-05-17 11:53:43 +08:00
/*
* JOIN_NOLOCK only happens during the transaction commit, so
* it is impossible that ->running_transaction is NULL
*/
BUG_ON(type == TRANS_JOIN_NOLOCK);
cur_trans = kmalloc(sizeof(*cur_trans), GFP_NOFS);
Btrfs: kill trans_mutex We use trans_mutex for lots of things, here's a basic list 1) To serialize trans_handles joining the currently running transaction 2) To make sure that no new trans handles are started while we are committing 3) To protect the dead_roots list and the transaction lists Really the serializing trans_handles joining is not too hard, and can really get bogged down in acquiring a reference to the transaction. So replace the trans_mutex with a trans_lock spinlock and use it to do the following 1) Protect fs_info->running_transaction. All trans handles have to do is check this, and then take a reference of the transaction and keep on going. 2) Protect the fs_info->trans_list. This doesn't get used too much, basically it just holds the current transactions, which will usually just be the currently committing transaction and the currently running transaction at most. 3) Protect the dead roots list. This is only ever processed by splicing the list so this is relatively simple. 4) Protect the fs_info->reloc_ctl stuff. This is very lightweight and was using the trans_mutex before, so this is a pretty straightforward change. 5) Protect fs_info->no_trans_join. Because we don't hold the trans_lock over the entirety of the commit we need to have a way to block new people from creating a new transaction while we're doing our work. So we set no_trans_join and in join_transaction we test to see if that is set, and if it is we do a wait_on_commit. 6) Make the transaction use count atomic so we don't need to take locks to modify it when we're dropping references. 7) Add a commit_lock to the transaction to make sure multiple people trying to commit the same transaction don't race and commit at the same time. 8) Make open_ioctl_trans an atomic so we don't have to take any locks for ioctl trans. I have tested this with xfstests, but obviously it is a pretty hairy change so lots of testing is greatly appreciated. Thanks, Signed-off-by: Josef Bacik <josef@redhat.com>
2011-04-12 05:25:13 +08:00
if (!cur_trans)
return -ENOMEM;
spin_lock(&fs_info->trans_lock);
if (fs_info->running_transaction) {
/*
* someone started a transaction after we unlocked. Make sure
Btrfs: make the state of the transaction more readable We used 3 variants to track the state of the transaction, it was complex and wasted the memory space. Besides that, it was hard to understand that which types of the transaction handles should be blocked in each transaction state, so the developers often made mistakes. This patch improved the above problem. In this patch, we define 6 states for the transaction, enum btrfs_trans_state { TRANS_STATE_RUNNING = 0, TRANS_STATE_BLOCKED = 1, TRANS_STATE_COMMIT_START = 2, TRANS_STATE_COMMIT_DOING = 3, TRANS_STATE_UNBLOCKED = 4, TRANS_STATE_COMPLETED = 5, TRANS_STATE_MAX = 6, } and just use 1 variant to track those state. In order to make the blocked handle types for each state more clear, we introduce a array: unsigned int btrfs_blocked_trans_types[TRANS_STATE_MAX] = { [TRANS_STATE_RUNNING] = 0U, [TRANS_STATE_BLOCKED] = (__TRANS_USERSPACE | __TRANS_START), [TRANS_STATE_COMMIT_START] = (__TRANS_USERSPACE | __TRANS_START | __TRANS_ATTACH), [TRANS_STATE_COMMIT_DOING] = (__TRANS_USERSPACE | __TRANS_START | __TRANS_ATTACH | __TRANS_JOIN), [TRANS_STATE_UNBLOCKED] = (__TRANS_USERSPACE | __TRANS_START | __TRANS_ATTACH | __TRANS_JOIN | __TRANS_JOIN_NOLOCK), [TRANS_STATE_COMPLETED] = (__TRANS_USERSPACE | __TRANS_START | __TRANS_ATTACH | __TRANS_JOIN | __TRANS_JOIN_NOLOCK), } it is very intuitionistic. Besides that, because we remove ->in_commit in transaction structure, so the lock ->commit_lock which was used to protect it is unnecessary, remove ->commit_lock. Signed-off-by: Miao Xie <miaox@cn.fujitsu.com> Signed-off-by: Josef Bacik <jbacik@fusionio.com>
2013-05-17 11:53:43 +08:00
* to redo the checks above
*/
kfree(cur_trans);
goto loop;
} else if (BTRFS_FS_ERROR(fs_info)) {
spin_unlock(&fs_info->trans_lock);
kfree(cur_trans);
return -EROFS;
}
cur_trans->fs_info = fs_info;
btrfs: make fast fsyncs wait only for writeback Currently regardless of a full or a fast fsync we always wait for ordered extents to complete, and then start logging the inode after that. However for fast fsyncs we can just wait for the writeback to complete, we don't need to wait for the ordered extents to complete since we use the list of modified extents maps to figure out which extents we must log and we can get their checksums directly from the ordered extents that are still in flight, otherwise look them up from the checksums tree. Until commit b5e6c3e170b770 ("btrfs: always wait on ordered extents at fsync time"), for fast fsyncs, we used to start logging without even waiting for the writeback to complete first, we would wait for it to complete after logging, while holding a transaction open, which lead to performance issues when using cgroups and probably for other cases too, as wait for IO while holding a transaction handle should be avoided as much as possible. After that, for fast fsyncs, we started to wait for ordered extents to complete before starting to log, which adds some latency to fsyncs and we even got at least one report about a performance drop which bisected to that particular change: https://lore.kernel.org/linux-btrfs/20181109215148.GF23260@techsingularity.net/ This change makes fast fsyncs only wait for writeback to finish before starting to log the inode, instead of waiting for both the writeback to finish and for the ordered extents to complete. This brings back part of the logic we had that extracts checksums from in flight ordered extents, which are not yet in the checksums tree, and making sure transaction commits wait for the completion of ordered extents previously logged (by far most of the time they have already completed by the time a transaction commit starts, resulting in no wait at all), to avoid any data loss if an ordered extent completes after the transaction used to log an inode is committed, followed by a power failure. When there are no other tasks accessing the checksums and the subvolume btrees, the ordered extent completion is pretty fast, typically taking 100 to 200 microseconds only in my observations. However when there are other tasks accessing these btrees, ordered extent completion can take a lot more time due to lock contention on nodes and leaves of these btrees. I've seen cases over 2 milliseconds, which starts to be significant. In particular when we do have concurrent fsyncs against different files there is a lot of contention on the checksums btree, since we have many tasks writing the checksums into the btree and other tasks that already started the logging phase are doing lookups for checksums in the btree. This change also turns all ranged fsyncs into full ranged fsyncs, which is something we already did when not using the NO_HOLES features or when doing a full fsync. This is to guarantee we never miss checksums due to writeback having been triggered only for a part of an extent, and we end up logging the full extent but only checksums for the written range, which results in missing checksums after log replay. Allowing ranged fsyncs to operate again only in the original range, when using the NO_HOLES feature and doing a fast fsync is doable but requires some non trivial changes to the writeback path, which can always be worked on later if needed, but I don't think they are a very common use case. Several tests were performed using fio for different numbers of concurrent jobs, each writing and fsyncing its own file, for both sequential and random file writes. The tests were run on bare metal, no virtualization, on a box with 12 cores (Intel i7-8700), 64Gb of RAM and a NVMe device, with a kernel configuration that is the default of typical distributions (debian in this case), without debug options enabled (kasan, kmemleak, slub debug, debug of page allocations, lock debugging, etc). The following script that calls fio was used: $ cat test-fsync.sh #!/bin/bash DEV=/dev/nvme0n1 MNT=/mnt/btrfs MOUNT_OPTIONS="-o ssd -o space_cache=v2" MKFS_OPTIONS="-d single -m single" if [ $# -ne 5 ]; then echo "Use $0 NUM_JOBS FILE_SIZE FSYNC_FREQ BLOCK_SIZE [write|randwrite]" exit 1 fi NUM_JOBS=$1 FILE_SIZE=$2 FSYNC_FREQ=$3 BLOCK_SIZE=$4 WRITE_MODE=$5 if [ "$WRITE_MODE" != "write" ] && [ "$WRITE_MODE" != "randwrite" ]; then echo "Invalid WRITE_MODE, must be 'write' or 'randwrite'" exit 1 fi cat <<EOF > /tmp/fio-job.ini [writers] rw=$WRITE_MODE fsync=$FSYNC_FREQ fallocate=none group_reporting=1 direct=0 bs=$BLOCK_SIZE ioengine=sync size=$FILE_SIZE directory=$MNT numjobs=$NUM_JOBS EOF echo "performance" | tee /sys/devices/system/cpu/cpu*/cpufreq/scaling_governor echo echo "Using config:" echo cat /tmp/fio-job.ini echo umount $MNT &> /dev/null mkfs.btrfs -f $MKFS_OPTIONS $DEV mount $MOUNT_OPTIONS $DEV $MNT fio /tmp/fio-job.ini umount $MNT The results were the following: ************************* *** sequential writes *** ************************* ==== 1 job, 8GiB file, fsync frequency 1, block size 64KiB ==== Before patch: WRITE: bw=36.6MiB/s (38.4MB/s), 36.6MiB/s-36.6MiB/s (38.4MB/s-38.4MB/s), io=8192MiB (8590MB), run=223689-223689msec After patch: WRITE: bw=40.2MiB/s (42.1MB/s), 40.2MiB/s-40.2MiB/s (42.1MB/s-42.1MB/s), io=8192MiB (8590MB), run=203980-203980msec (+9.8%, -8.8% runtime) ==== 2 jobs, 4GiB files, fsync frequency 1, block size 64KiB ==== Before patch: WRITE: bw=35.8MiB/s (37.5MB/s), 35.8MiB/s-35.8MiB/s (37.5MB/s-37.5MB/s), io=8192MiB (8590MB), run=228950-228950msec After patch: WRITE: bw=43.5MiB/s (45.6MB/s), 43.5MiB/s-43.5MiB/s (45.6MB/s-45.6MB/s), io=8192MiB (8590MB), run=188272-188272msec (+21.5% throughput, -17.8% runtime) ==== 4 jobs, 2GiB files, fsync frequency 1, block size 64KiB ==== Before patch: WRITE: bw=50.1MiB/s (52.6MB/s), 50.1MiB/s-50.1MiB/s (52.6MB/s-52.6MB/s), io=8192MiB (8590MB), run=163446-163446msec After patch: WRITE: bw=64.5MiB/s (67.6MB/s), 64.5MiB/s-64.5MiB/s (67.6MB/s-67.6MB/s), io=8192MiB (8590MB), run=126987-126987msec (+28.7% throughput, -22.3% runtime) ==== 8 jobs, 1GiB files, fsync frequency 1, block size 64KiB ==== Before patch: WRITE: bw=64.0MiB/s (68.1MB/s), 64.0MiB/s-64.0MiB/s (68.1MB/s-68.1MB/s), io=8192MiB (8590MB), run=126075-126075msec After patch: WRITE: bw=86.8MiB/s (91.0MB/s), 86.8MiB/s-86.8MiB/s (91.0MB/s-91.0MB/s), io=8192MiB (8590MB), run=94358-94358msec (+35.6% throughput, -25.2% runtime) ==== 16 jobs, 512MiB files, fsync frequency 1, block size 64KiB ==== Before patch: WRITE: bw=79.8MiB/s (83.6MB/s), 79.8MiB/s-79.8MiB/s (83.6MB/s-83.6MB/s), io=8192MiB (8590MB), run=102694-102694msec After patch: WRITE: bw=107MiB/s (112MB/s), 107MiB/s-107MiB/s (112MB/s-112MB/s), io=8192MiB (8590MB), run=76446-76446msec (+34.1% throughput, -25.6% runtime) ==== 32 jobs, 512MiB files, fsync frequency 1, block size 64KiB ==== Before patch: WRITE: bw=93.2MiB/s (97.7MB/s), 93.2MiB/s-93.2MiB/s (97.7MB/s-97.7MB/s), io=16.0GiB (17.2GB), run=175836-175836msec After patch: WRITE: bw=111MiB/s (117MB/s), 111MiB/s-111MiB/s (117MB/s-117MB/s), io=16.0GiB (17.2GB), run=147001-147001msec (+19.1% throughput, -16.4% runtime) ==== 64 jobs, 512MiB files, fsync frequency 1, block size 64KiB ==== Before patch: WRITE: bw=108MiB/s (114MB/s), 108MiB/s-108MiB/s (114MB/s-114MB/s), io=32.0GiB (34.4GB), run=302656-302656msec After patch: WRITE: bw=133MiB/s (140MB/s), 133MiB/s-133MiB/s (140MB/s-140MB/s), io=32.0GiB (34.4GB), run=246003-246003msec (+23.1% throughput, -18.7% runtime) ************************ *** random writes *** ************************ ==== 1 job, 8GiB file, fsync frequency 16, block size 4KiB ==== Before patch: WRITE: bw=11.5MiB/s (12.0MB/s), 11.5MiB/s-11.5MiB/s (12.0MB/s-12.0MB/s), io=8192MiB (8590MB), run=714281-714281msec After patch: WRITE: bw=11.6MiB/s (12.2MB/s), 11.6MiB/s-11.6MiB/s (12.2MB/s-12.2MB/s), io=8192MiB (8590MB), run=705959-705959msec (+0.9% throughput, -1.7% runtime) ==== 2 jobs, 4GiB files, fsync frequency 16, block size 4KiB ==== Before patch: WRITE: bw=12.8MiB/s (13.5MB/s), 12.8MiB/s-12.8MiB/s (13.5MB/s-13.5MB/s), io=8192MiB (8590MB), run=638101-638101msec After patch: WRITE: bw=13.1MiB/s (13.7MB/s), 13.1MiB/s-13.1MiB/s (13.7MB/s-13.7MB/s), io=8192MiB (8590MB), run=625374-625374msec (+2.3% throughput, -2.0% runtime) ==== 4 jobs, 2GiB files, fsync frequency 16, block size 4KiB ==== Before patch: WRITE: bw=15.4MiB/s (16.2MB/s), 15.4MiB/s-15.4MiB/s (16.2MB/s-16.2MB/s), io=8192MiB (8590MB), run=531146-531146msec After patch: WRITE: bw=17.8MiB/s (18.7MB/s), 17.8MiB/s-17.8MiB/s (18.7MB/s-18.7MB/s), io=8192MiB (8590MB), run=460431-460431msec (+15.6% throughput, -13.3% runtime) ==== 8 jobs, 1GiB files, fsync frequency 16, block size 4KiB ==== Before patch: WRITE: bw=19.9MiB/s (20.8MB/s), 19.9MiB/s-19.9MiB/s (20.8MB/s-20.8MB/s), io=8192MiB (8590MB), run=412664-412664msec After patch: WRITE: bw=22.2MiB/s (23.3MB/s), 22.2MiB/s-22.2MiB/s (23.3MB/s-23.3MB/s), io=8192MiB (8590MB), run=368589-368589msec (+11.6% throughput, -10.7% runtime) ==== 16 jobs, 512MiB files, fsync frequency 16, block size 4KiB ==== Before patch: WRITE: bw=29.3MiB/s (30.7MB/s), 29.3MiB/s-29.3MiB/s (30.7MB/s-30.7MB/s), io=8192MiB (8590MB), run=279924-279924msec After patch: WRITE: bw=30.4MiB/s (31.9MB/s), 30.4MiB/s-30.4MiB/s (31.9MB/s-31.9MB/s), io=8192MiB (8590MB), run=269258-269258msec (+3.8% throughput, -3.8% runtime) ==== 32 jobs, 512MiB files, fsync frequency 16, block size 4KiB ==== Before patch: WRITE: bw=36.9MiB/s (38.7MB/s), 36.9MiB/s-36.9MiB/s (38.7MB/s-38.7MB/s), io=16.0GiB (17.2GB), run=443581-443581msec After patch: WRITE: bw=41.6MiB/s (43.6MB/s), 41.6MiB/s-41.6MiB/s (43.6MB/s-43.6MB/s), io=16.0GiB (17.2GB), run=394114-394114msec (+12.7% throughput, -11.2% runtime) ==== 64 jobs, 512MiB files, fsync frequency 16, block size 4KiB ==== Before patch: WRITE: bw=45.9MiB/s (48.1MB/s), 45.9MiB/s-45.9MiB/s (48.1MB/s-48.1MB/s), io=32.0GiB (34.4GB), run=714614-714614msec After patch: WRITE: bw=48.8MiB/s (51.1MB/s), 48.8MiB/s-48.8MiB/s (51.1MB/s-51.1MB/s), io=32.0GiB (34.4GB), run=672087-672087msec (+6.3% throughput, -6.0% runtime) Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2020-08-11 19:43:58 +08:00
atomic_set(&cur_trans->pending_ordered, 0);
init_waitqueue_head(&cur_trans->pending_wait);
Btrfs: kill trans_mutex We use trans_mutex for lots of things, here's a basic list 1) To serialize trans_handles joining the currently running transaction 2) To make sure that no new trans handles are started while we are committing 3) To protect the dead_roots list and the transaction lists Really the serializing trans_handles joining is not too hard, and can really get bogged down in acquiring a reference to the transaction. So replace the trans_mutex with a trans_lock spinlock and use it to do the following 1) Protect fs_info->running_transaction. All trans handles have to do is check this, and then take a reference of the transaction and keep on going. 2) Protect the fs_info->trans_list. This doesn't get used too much, basically it just holds the current transactions, which will usually just be the currently committing transaction and the currently running transaction at most. 3) Protect the dead roots list. This is only ever processed by splicing the list so this is relatively simple. 4) Protect the fs_info->reloc_ctl stuff. This is very lightweight and was using the trans_mutex before, so this is a pretty straightforward change. 5) Protect fs_info->no_trans_join. Because we don't hold the trans_lock over the entirety of the commit we need to have a way to block new people from creating a new transaction while we're doing our work. So we set no_trans_join and in join_transaction we test to see if that is set, and if it is we do a wait_on_commit. 6) Make the transaction use count atomic so we don't need to take locks to modify it when we're dropping references. 7) Add a commit_lock to the transaction to make sure multiple people trying to commit the same transaction don't race and commit at the same time. 8) Make open_ioctl_trans an atomic so we don't have to take any locks for ioctl trans. I have tested this with xfstests, but obviously it is a pretty hairy change so lots of testing is greatly appreciated. Thanks, Signed-off-by: Josef Bacik <josef@redhat.com>
2011-04-12 05:25:13 +08:00
atomic_set(&cur_trans->num_writers, 1);
extwriter_counter_init(cur_trans, type);
Btrfs: kill trans_mutex We use trans_mutex for lots of things, here's a basic list 1) To serialize trans_handles joining the currently running transaction 2) To make sure that no new trans handles are started while we are committing 3) To protect the dead_roots list and the transaction lists Really the serializing trans_handles joining is not too hard, and can really get bogged down in acquiring a reference to the transaction. So replace the trans_mutex with a trans_lock spinlock and use it to do the following 1) Protect fs_info->running_transaction. All trans handles have to do is check this, and then take a reference of the transaction and keep on going. 2) Protect the fs_info->trans_list. This doesn't get used too much, basically it just holds the current transactions, which will usually just be the currently committing transaction and the currently running transaction at most. 3) Protect the dead roots list. This is only ever processed by splicing the list so this is relatively simple. 4) Protect the fs_info->reloc_ctl stuff. This is very lightweight and was using the trans_mutex before, so this is a pretty straightforward change. 5) Protect fs_info->no_trans_join. Because we don't hold the trans_lock over the entirety of the commit we need to have a way to block new people from creating a new transaction while we're doing our work. So we set no_trans_join and in join_transaction we test to see if that is set, and if it is we do a wait_on_commit. 6) Make the transaction use count atomic so we don't need to take locks to modify it when we're dropping references. 7) Add a commit_lock to the transaction to make sure multiple people trying to commit the same transaction don't race and commit at the same time. 8) Make open_ioctl_trans an atomic so we don't have to take any locks for ioctl trans. I have tested this with xfstests, but obviously it is a pretty hairy change so lots of testing is greatly appreciated. Thanks, Signed-off-by: Josef Bacik <josef@redhat.com>
2011-04-12 05:25:13 +08:00
init_waitqueue_head(&cur_trans->writer_wait);
init_waitqueue_head(&cur_trans->commit_wait);
Btrfs: make the state of the transaction more readable We used 3 variants to track the state of the transaction, it was complex and wasted the memory space. Besides that, it was hard to understand that which types of the transaction handles should be blocked in each transaction state, so the developers often made mistakes. This patch improved the above problem. In this patch, we define 6 states for the transaction, enum btrfs_trans_state { TRANS_STATE_RUNNING = 0, TRANS_STATE_BLOCKED = 1, TRANS_STATE_COMMIT_START = 2, TRANS_STATE_COMMIT_DOING = 3, TRANS_STATE_UNBLOCKED = 4, TRANS_STATE_COMPLETED = 5, TRANS_STATE_MAX = 6, } and just use 1 variant to track those state. In order to make the blocked handle types for each state more clear, we introduce a array: unsigned int btrfs_blocked_trans_types[TRANS_STATE_MAX] = { [TRANS_STATE_RUNNING] = 0U, [TRANS_STATE_BLOCKED] = (__TRANS_USERSPACE | __TRANS_START), [TRANS_STATE_COMMIT_START] = (__TRANS_USERSPACE | __TRANS_START | __TRANS_ATTACH), [TRANS_STATE_COMMIT_DOING] = (__TRANS_USERSPACE | __TRANS_START | __TRANS_ATTACH | __TRANS_JOIN), [TRANS_STATE_UNBLOCKED] = (__TRANS_USERSPACE | __TRANS_START | __TRANS_ATTACH | __TRANS_JOIN | __TRANS_JOIN_NOLOCK), [TRANS_STATE_COMPLETED] = (__TRANS_USERSPACE | __TRANS_START | __TRANS_ATTACH | __TRANS_JOIN | __TRANS_JOIN_NOLOCK), } it is very intuitionistic. Besides that, because we remove ->in_commit in transaction structure, so the lock ->commit_lock which was used to protect it is unnecessary, remove ->commit_lock. Signed-off-by: Miao Xie <miaox@cn.fujitsu.com> Signed-off-by: Josef Bacik <jbacik@fusionio.com>
2013-05-17 11:53:43 +08:00
cur_trans->state = TRANS_STATE_RUNNING;
Btrfs: kill trans_mutex We use trans_mutex for lots of things, here's a basic list 1) To serialize trans_handles joining the currently running transaction 2) To make sure that no new trans handles are started while we are committing 3) To protect the dead_roots list and the transaction lists Really the serializing trans_handles joining is not too hard, and can really get bogged down in acquiring a reference to the transaction. So replace the trans_mutex with a trans_lock spinlock and use it to do the following 1) Protect fs_info->running_transaction. All trans handles have to do is check this, and then take a reference of the transaction and keep on going. 2) Protect the fs_info->trans_list. This doesn't get used too much, basically it just holds the current transactions, which will usually just be the currently committing transaction and the currently running transaction at most. 3) Protect the dead roots list. This is only ever processed by splicing the list so this is relatively simple. 4) Protect the fs_info->reloc_ctl stuff. This is very lightweight and was using the trans_mutex before, so this is a pretty straightforward change. 5) Protect fs_info->no_trans_join. Because we don't hold the trans_lock over the entirety of the commit we need to have a way to block new people from creating a new transaction while we're doing our work. So we set no_trans_join and in join_transaction we test to see if that is set, and if it is we do a wait_on_commit. 6) Make the transaction use count atomic so we don't need to take locks to modify it when we're dropping references. 7) Add a commit_lock to the transaction to make sure multiple people trying to commit the same transaction don't race and commit at the same time. 8) Make open_ioctl_trans an atomic so we don't have to take any locks for ioctl trans. I have tested this with xfstests, but obviously it is a pretty hairy change so lots of testing is greatly appreciated. Thanks, Signed-off-by: Josef Bacik <josef@redhat.com>
2011-04-12 05:25:13 +08:00
/*
* One for this trans handle, one so it will live on until we
* commit the transaction.
*/
refcount_set(&cur_trans->use_count, 2);
cur_trans->flags = 0;
cur_trans->start_time = ktime_get_seconds();
Btrfs: kill trans_mutex We use trans_mutex for lots of things, here's a basic list 1) To serialize trans_handles joining the currently running transaction 2) To make sure that no new trans handles are started while we are committing 3) To protect the dead_roots list and the transaction lists Really the serializing trans_handles joining is not too hard, and can really get bogged down in acquiring a reference to the transaction. So replace the trans_mutex with a trans_lock spinlock and use it to do the following 1) Protect fs_info->running_transaction. All trans handles have to do is check this, and then take a reference of the transaction and keep on going. 2) Protect the fs_info->trans_list. This doesn't get used too much, basically it just holds the current transactions, which will usually just be the currently committing transaction and the currently running transaction at most. 3) Protect the dead roots list. This is only ever processed by splicing the list so this is relatively simple. 4) Protect the fs_info->reloc_ctl stuff. This is very lightweight and was using the trans_mutex before, so this is a pretty straightforward change. 5) Protect fs_info->no_trans_join. Because we don't hold the trans_lock over the entirety of the commit we need to have a way to block new people from creating a new transaction while we're doing our work. So we set no_trans_join and in join_transaction we test to see if that is set, and if it is we do a wait_on_commit. 6) Make the transaction use count atomic so we don't need to take locks to modify it when we're dropping references. 7) Add a commit_lock to the transaction to make sure multiple people trying to commit the same transaction don't race and commit at the same time. 8) Make open_ioctl_trans an atomic so we don't have to take any locks for ioctl trans. I have tested this with xfstests, but obviously it is a pretty hairy change so lots of testing is greatly appreciated. Thanks, Signed-off-by: Josef Bacik <josef@redhat.com>
2011-04-12 05:25:13 +08:00
memset(&cur_trans->delayed_refs, 0, sizeof(cur_trans->delayed_refs));
Btrfs: delayed-refs: use rb_first_cached for href_root rb_first_cached() trades an extra pointer "leftmost" for doing the same job as rb_first() but in O(1). Functions manipulating href_root need to get the first entry, this converts href_root to use rb_first_cached(). This patch is first in the sequenct of similar updates to other rbtrees and this is analysis of the expected behaviour and improvements. There's a common pattern: while (node = rb_first) { entry = rb_entry(node) next = rb_next(node) rb_erase(node) cleanup(entry) } rb_first needs to traverse the tree up to logN depth, rb_erase can completely reshuffle the tree. With the caching we'll skip the traversal in rb_first. That's a cached memory access vs looped pointer dereference trade-off that IMHO has a clear winner. Measurements show there's not much difference in a sample tree with 10000 nodes: 4.5s / rb_first and 4.8s / rb_first_cached. Real effects of caching and pointer chasing are unpredictable though. Further optimzations can be done to avoid the expensive rb_erase step. In some cases it's ok to process the nodes in any order, so the tree can be traversed in post-order, not rebalancing the children nodes and just calling free. Care must be taken regarding the next node. Tested-by: Holger Hoffstätte <holger@applied-asynchrony.com> Signed-off-by: Liu Bo <bo.liu@linux.alibaba.com> Reviewed-by: David Sterba <dsterba@suse.com> [ update changelog from mail discussions ] Signed-off-by: David Sterba <dsterba@suse.com>
2018-08-23 03:51:49 +08:00
cur_trans->delayed_refs.href_root = RB_ROOT_CACHED;
cur_trans->delayed_refs.dirty_extent_root = RB_ROOT;
atomic_set(&cur_trans->delayed_refs.num_entries, 0);
/*
* although the tree mod log is per file system and not per transaction,
* the log must never go across transaction boundaries.
*/
smp_mb();
if (!list_empty(&fs_info->tree_mod_seq_list))
WARN(1, KERN_ERR "BTRFS: tree_mod_seq_list not empty when creating a fresh transaction\n");
if (!RB_EMPTY_ROOT(&fs_info->tree_mod_log))
WARN(1, KERN_ERR "BTRFS: tree_mod_log rb tree not empty when creating a fresh transaction\n");
atomic64_set(&fs_info->tree_mod_seq, 0);
Btrfs: kill trans_mutex We use trans_mutex for lots of things, here's a basic list 1) To serialize trans_handles joining the currently running transaction 2) To make sure that no new trans handles are started while we are committing 3) To protect the dead_roots list and the transaction lists Really the serializing trans_handles joining is not too hard, and can really get bogged down in acquiring a reference to the transaction. So replace the trans_mutex with a trans_lock spinlock and use it to do the following 1) Protect fs_info->running_transaction. All trans handles have to do is check this, and then take a reference of the transaction and keep on going. 2) Protect the fs_info->trans_list. This doesn't get used too much, basically it just holds the current transactions, which will usually just be the currently committing transaction and the currently running transaction at most. 3) Protect the dead roots list. This is only ever processed by splicing the list so this is relatively simple. 4) Protect the fs_info->reloc_ctl stuff. This is very lightweight and was using the trans_mutex before, so this is a pretty straightforward change. 5) Protect fs_info->no_trans_join. Because we don't hold the trans_lock over the entirety of the commit we need to have a way to block new people from creating a new transaction while we're doing our work. So we set no_trans_join and in join_transaction we test to see if that is set, and if it is we do a wait_on_commit. 6) Make the transaction use count atomic so we don't need to take locks to modify it when we're dropping references. 7) Add a commit_lock to the transaction to make sure multiple people trying to commit the same transaction don't race and commit at the same time. 8) Make open_ioctl_trans an atomic so we don't have to take any locks for ioctl trans. I have tested this with xfstests, but obviously it is a pretty hairy change so lots of testing is greatly appreciated. Thanks, Signed-off-by: Josef Bacik <josef@redhat.com>
2011-04-12 05:25:13 +08:00
spin_lock_init(&cur_trans->delayed_refs.lock);
INIT_LIST_HEAD(&cur_trans->pending_snapshots);
INIT_LIST_HEAD(&cur_trans->dev_update_list);
INIT_LIST_HEAD(&cur_trans->switch_commits);
INIT_LIST_HEAD(&cur_trans->dirty_bgs);
INIT_LIST_HEAD(&cur_trans->io_bgs);
INIT_LIST_HEAD(&cur_trans->dropped_roots);
mutex_init(&cur_trans->cache_write_mutex);
spin_lock_init(&cur_trans->dirty_bgs_lock);
INIT_LIST_HEAD(&cur_trans->deleted_bgs);
spin_lock_init(&cur_trans->dropped_roots_lock);
INIT_LIST_HEAD(&cur_trans->releasing_ebs);
spin_lock_init(&cur_trans->releasing_ebs_lock);
list_add_tail(&cur_trans->list, &fs_info->trans_list);
extent_io_tree_init(fs_info, &cur_trans->dirty_pages,
IO_TREE_TRANS_DIRTY_PAGES, fs_info->btree_inode);
extent_io_tree_init(fs_info, &cur_trans->pinned_extents,
IO_TREE_FS_PINNED_EXTENTS, NULL);
fs_info->generation++;
cur_trans->transid = fs_info->generation;
fs_info->running_transaction = cur_trans;
cur_trans->aborted = 0;
spin_unlock(&fs_info->trans_lock);
return 0;
}
/*
* This does all the record keeping required to make sure that a shareable root
* is properly recorded in a given transaction. This is required to make sure
* the old root from before we joined the transaction is deleted when the
* transaction commits.
*/
static int record_root_in_trans(struct btrfs_trans_handle *trans,
btrfs: qgroup: Fix qgroup accounting when creating snapshot Current btrfs qgroup design implies a requirement that after calling btrfs_qgroup_account_extents() there must be a commit root switch. Normally this is OK, as btrfs_qgroup_accounting_extents() is only called inside btrfs_commit_transaction() just be commit_cowonly_roots(). However there is a exception at create_pending_snapshot(), which will call btrfs_qgroup_account_extents() but no any commit root switch. In case of creating a snapshot whose parent root is itself (create a snapshot of fs tree), it will corrupt qgroup by the following trace: (skipped unrelated data) ====== btrfs_qgroup_account_extent: bytenr = 29786112, num_bytes = 16384, nr_old_roots = 0, nr_new_roots = 1 qgroup_update_counters: qgid = 5, cur_old_count = 0, cur_new_count = 1, rfer = 0, excl = 0 qgroup_update_counters: qgid = 5, cur_old_count = 0, cur_new_count = 1, rfer = 16384, excl = 16384 btrfs_qgroup_account_extent: bytenr = 29786112, num_bytes = 16384, nr_old_roots = 0, nr_new_roots = 0 ====== The problem here is in first qgroup_account_extent(), the nr_new_roots of the extent is 1, which means its reference got increased, and qgroup increased its rfer and excl. But at second qgroup_account_extent(), its reference got decreased, but between these two qgroup_account_extent(), there is no switch roots. This leads to the same nr_old_roots, and this extent just got ignored by qgroup, which means this extent is wrongly accounted. Fix it by call commit_cowonly_roots() after qgroup_account_extent() in create_pending_snapshot(), with needed preparation. Mark: I added a check at the top of qgroup_account_snapshot() to skip this code if qgroups are turned off. xfstest btrfs/122 exposes this problem. Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com> Reviewed-by: Josef Bacik <jbacik@fb.com> Signed-off-by: Mark Fasheh <mfasheh@suse.de> Signed-off-by: David Sterba <dsterba@suse.com>
2016-05-12 03:53:52 +08:00
struct btrfs_root *root,
int force)
{
struct btrfs_fs_info *fs_info = root->fs_info;
int ret = 0;
if ((test_bit(BTRFS_ROOT_SHAREABLE, &root->state) &&
btrfs: qgroup: Fix qgroup accounting when creating snapshot Current btrfs qgroup design implies a requirement that after calling btrfs_qgroup_account_extents() there must be a commit root switch. Normally this is OK, as btrfs_qgroup_accounting_extents() is only called inside btrfs_commit_transaction() just be commit_cowonly_roots(). However there is a exception at create_pending_snapshot(), which will call btrfs_qgroup_account_extents() but no any commit root switch. In case of creating a snapshot whose parent root is itself (create a snapshot of fs tree), it will corrupt qgroup by the following trace: (skipped unrelated data) ====== btrfs_qgroup_account_extent: bytenr = 29786112, num_bytes = 16384, nr_old_roots = 0, nr_new_roots = 1 qgroup_update_counters: qgid = 5, cur_old_count = 0, cur_new_count = 1, rfer = 0, excl = 0 qgroup_update_counters: qgid = 5, cur_old_count = 0, cur_new_count = 1, rfer = 16384, excl = 16384 btrfs_qgroup_account_extent: bytenr = 29786112, num_bytes = 16384, nr_old_roots = 0, nr_new_roots = 0 ====== The problem here is in first qgroup_account_extent(), the nr_new_roots of the extent is 1, which means its reference got increased, and qgroup increased its rfer and excl. But at second qgroup_account_extent(), its reference got decreased, but between these two qgroup_account_extent(), there is no switch roots. This leads to the same nr_old_roots, and this extent just got ignored by qgroup, which means this extent is wrongly accounted. Fix it by call commit_cowonly_roots() after qgroup_account_extent() in create_pending_snapshot(), with needed preparation. Mark: I added a check at the top of qgroup_account_snapshot() to skip this code if qgroups are turned off. xfstest btrfs/122 exposes this problem. Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com> Reviewed-by: Josef Bacik <jbacik@fb.com> Signed-off-by: Mark Fasheh <mfasheh@suse.de> Signed-off-by: David Sterba <dsterba@suse.com>
2016-05-12 03:53:52 +08:00
root->last_trans < trans->transid) || force) {
WARN_ON(!force && root->commit_root != root->node);
Btrfs: Mixed back reference (FORWARD ROLLING FORMAT CHANGE) This commit introduces a new kind of back reference for btrfs metadata. Once a filesystem has been mounted with this commit, IT WILL NO LONGER BE MOUNTABLE BY OLDER KERNELS. When a tree block in subvolume tree is cow'd, the reference counts of all extents it points to are increased by one. At transaction commit time, the old root of the subvolume is recorded in a "dead root" data structure, and the btree it points to is later walked, dropping reference counts and freeing any blocks where the reference count goes to 0. The increments done during cow and decrements done after commit cancel out, and the walk is a very expensive way to go about freeing the blocks that are no longer referenced by the new btree root. This commit reduces the transaction overhead by avoiding the need for dead root records. When a non-shared tree block is cow'd, we free the old block at once, and the new block inherits old block's references. When a tree block with reference count > 1 is cow'd, we increase the reference counts of all extents the new block points to by one, and decrease the old block's reference count by one. This dead tree avoidance code removes the need to modify the reference counts of lower level extents when a non-shared tree block is cow'd. But we still need to update back ref for all pointers in the block. This is because the location of the block is recorded in the back ref item. We can solve this by introducing a new type of back ref. The new back ref provides information about pointer's key, level and in which tree the pointer lives. This information allow us to find the pointer by searching the tree. The shortcoming of the new back ref is that it only works for pointers in tree blocks referenced by their owner trees. This is mostly a problem for snapshots, where resolving one of these fuzzy back references would be O(number_of_snapshots) and quite slow. The solution used here is to use the fuzzy back references in the common case where a given tree block is only referenced by one root, and use the full back references when multiple roots have a reference on a given block. This commit adds per subvolume red-black tree to keep trace of cached inodes. The red-black tree helps the balancing code to find cached inodes whose inode numbers within a given range. This commit improves the balancing code by introducing several data structures to keep the state of balancing. The most important one is the back ref cache. It caches how the upper level tree blocks are referenced. This greatly reduce the overhead of checking back ref. The improved balancing code scales significantly better with a large number of snapshots. This is a very large commit and was written in a number of pieces. But, they depend heavily on the disk format change and were squashed together to make sure git bisect didn't end up in a bad state wrt space balancing or the format change. Signed-off-by: Yan Zheng <zheng.yan@oracle.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-06-10 22:45:14 +08:00
/*
* see below for IN_TRANS_SETUP usage rules
* we have the reloc mutex held now, so there
* is only one writer in this function
*/
set_bit(BTRFS_ROOT_IN_TRANS_SETUP, &root->state);
/* make sure readers find IN_TRANS_SETUP before
* they find our root->last_trans update
*/
smp_wmb();
spin_lock(&fs_info->fs_roots_radix_lock);
btrfs: qgroup: Fix qgroup accounting when creating snapshot Current btrfs qgroup design implies a requirement that after calling btrfs_qgroup_account_extents() there must be a commit root switch. Normally this is OK, as btrfs_qgroup_accounting_extents() is only called inside btrfs_commit_transaction() just be commit_cowonly_roots(). However there is a exception at create_pending_snapshot(), which will call btrfs_qgroup_account_extents() but no any commit root switch. In case of creating a snapshot whose parent root is itself (create a snapshot of fs tree), it will corrupt qgroup by the following trace: (skipped unrelated data) ====== btrfs_qgroup_account_extent: bytenr = 29786112, num_bytes = 16384, nr_old_roots = 0, nr_new_roots = 1 qgroup_update_counters: qgid = 5, cur_old_count = 0, cur_new_count = 1, rfer = 0, excl = 0 qgroup_update_counters: qgid = 5, cur_old_count = 0, cur_new_count = 1, rfer = 16384, excl = 16384 btrfs_qgroup_account_extent: bytenr = 29786112, num_bytes = 16384, nr_old_roots = 0, nr_new_roots = 0 ====== The problem here is in first qgroup_account_extent(), the nr_new_roots of the extent is 1, which means its reference got increased, and qgroup increased its rfer and excl. But at second qgroup_account_extent(), its reference got decreased, but between these two qgroup_account_extent(), there is no switch roots. This leads to the same nr_old_roots, and this extent just got ignored by qgroup, which means this extent is wrongly accounted. Fix it by call commit_cowonly_roots() after qgroup_account_extent() in create_pending_snapshot(), with needed preparation. Mark: I added a check at the top of qgroup_account_snapshot() to skip this code if qgroups are turned off. xfstest btrfs/122 exposes this problem. Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com> Reviewed-by: Josef Bacik <jbacik@fb.com> Signed-off-by: Mark Fasheh <mfasheh@suse.de> Signed-off-by: David Sterba <dsterba@suse.com>
2016-05-12 03:53:52 +08:00
if (root->last_trans == trans->transid && !force) {
spin_unlock(&fs_info->fs_roots_radix_lock);
Btrfs: kill trans_mutex We use trans_mutex for lots of things, here's a basic list 1) To serialize trans_handles joining the currently running transaction 2) To make sure that no new trans handles are started while we are committing 3) To protect the dead_roots list and the transaction lists Really the serializing trans_handles joining is not too hard, and can really get bogged down in acquiring a reference to the transaction. So replace the trans_mutex with a trans_lock spinlock and use it to do the following 1) Protect fs_info->running_transaction. All trans handles have to do is check this, and then take a reference of the transaction and keep on going. 2) Protect the fs_info->trans_list. This doesn't get used too much, basically it just holds the current transactions, which will usually just be the currently committing transaction and the currently running transaction at most. 3) Protect the dead roots list. This is only ever processed by splicing the list so this is relatively simple. 4) Protect the fs_info->reloc_ctl stuff. This is very lightweight and was using the trans_mutex before, so this is a pretty straightforward change. 5) Protect fs_info->no_trans_join. Because we don't hold the trans_lock over the entirety of the commit we need to have a way to block new people from creating a new transaction while we're doing our work. So we set no_trans_join and in join_transaction we test to see if that is set, and if it is we do a wait_on_commit. 6) Make the transaction use count atomic so we don't need to take locks to modify it when we're dropping references. 7) Add a commit_lock to the transaction to make sure multiple people trying to commit the same transaction don't race and commit at the same time. 8) Make open_ioctl_trans an atomic so we don't have to take any locks for ioctl trans. I have tested this with xfstests, but obviously it is a pretty hairy change so lots of testing is greatly appreciated. Thanks, Signed-off-by: Josef Bacik <josef@redhat.com>
2011-04-12 05:25:13 +08:00
return 0;
}
radix_tree_tag_set(&fs_info->fs_roots_radix,
(unsigned long)root->root_key.objectid,
BTRFS_ROOT_TRANS_TAG);
spin_unlock(&fs_info->fs_roots_radix_lock);
root->last_trans = trans->transid;
/* this is pretty tricky. We don't want to
* take the relocation lock in btrfs_record_root_in_trans
* unless we're really doing the first setup for this root in
* this transaction.
*
* Normally we'd use root->last_trans as a flag to decide
* if we want to take the expensive mutex.
*
* But, we have to set root->last_trans before we
* init the relocation root, otherwise, we trip over warnings
* in ctree.c. The solution used here is to flag ourselves
* with root IN_TRANS_SETUP. When this is 1, we're still
* fixing up the reloc trees and everyone must wait.
*
* When this is zero, they can trust root->last_trans and fly
* through btrfs_record_root_in_trans without having to take the
* lock. smp_wmb() makes sure that all the writes above are
* done before we pop in the zero below
*/
ret = btrfs_init_reloc_root(trans, root);
smp_mb__before_atomic();
clear_bit(BTRFS_ROOT_IN_TRANS_SETUP, &root->state);
Btrfs: Mixed back reference (FORWARD ROLLING FORMAT CHANGE) This commit introduces a new kind of back reference for btrfs metadata. Once a filesystem has been mounted with this commit, IT WILL NO LONGER BE MOUNTABLE BY OLDER KERNELS. When a tree block in subvolume tree is cow'd, the reference counts of all extents it points to are increased by one. At transaction commit time, the old root of the subvolume is recorded in a "dead root" data structure, and the btree it points to is later walked, dropping reference counts and freeing any blocks where the reference count goes to 0. The increments done during cow and decrements done after commit cancel out, and the walk is a very expensive way to go about freeing the blocks that are no longer referenced by the new btree root. This commit reduces the transaction overhead by avoiding the need for dead root records. When a non-shared tree block is cow'd, we free the old block at once, and the new block inherits old block's references. When a tree block with reference count > 1 is cow'd, we increase the reference counts of all extents the new block points to by one, and decrease the old block's reference count by one. This dead tree avoidance code removes the need to modify the reference counts of lower level extents when a non-shared tree block is cow'd. But we still need to update back ref for all pointers in the block. This is because the location of the block is recorded in the back ref item. We can solve this by introducing a new type of back ref. The new back ref provides information about pointer's key, level and in which tree the pointer lives. This information allow us to find the pointer by searching the tree. The shortcoming of the new back ref is that it only works for pointers in tree blocks referenced by their owner trees. This is mostly a problem for snapshots, where resolving one of these fuzzy back references would be O(number_of_snapshots) and quite slow. The solution used here is to use the fuzzy back references in the common case where a given tree block is only referenced by one root, and use the full back references when multiple roots have a reference on a given block. This commit adds per subvolume red-black tree to keep trace of cached inodes. The red-black tree helps the balancing code to find cached inodes whose inode numbers within a given range. This commit improves the balancing code by introducing several data structures to keep the state of balancing. The most important one is the back ref cache. It caches how the upper level tree blocks are referenced. This greatly reduce the overhead of checking back ref. The improved balancing code scales significantly better with a large number of snapshots. This is a very large commit and was written in a number of pieces. But, they depend heavily on the disk format change and were squashed together to make sure git bisect didn't end up in a bad state wrt space balancing or the format change. Signed-off-by: Yan Zheng <zheng.yan@oracle.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-06-10 22:45:14 +08:00
}
return ret;
Btrfs: Mixed back reference (FORWARD ROLLING FORMAT CHANGE) This commit introduces a new kind of back reference for btrfs metadata. Once a filesystem has been mounted with this commit, IT WILL NO LONGER BE MOUNTABLE BY OLDER KERNELS. When a tree block in subvolume tree is cow'd, the reference counts of all extents it points to are increased by one. At transaction commit time, the old root of the subvolume is recorded in a "dead root" data structure, and the btree it points to is later walked, dropping reference counts and freeing any blocks where the reference count goes to 0. The increments done during cow and decrements done after commit cancel out, and the walk is a very expensive way to go about freeing the blocks that are no longer referenced by the new btree root. This commit reduces the transaction overhead by avoiding the need for dead root records. When a non-shared tree block is cow'd, we free the old block at once, and the new block inherits old block's references. When a tree block with reference count > 1 is cow'd, we increase the reference counts of all extents the new block points to by one, and decrease the old block's reference count by one. This dead tree avoidance code removes the need to modify the reference counts of lower level extents when a non-shared tree block is cow'd. But we still need to update back ref for all pointers in the block. This is because the location of the block is recorded in the back ref item. We can solve this by introducing a new type of back ref. The new back ref provides information about pointer's key, level and in which tree the pointer lives. This information allow us to find the pointer by searching the tree. The shortcoming of the new back ref is that it only works for pointers in tree blocks referenced by their owner trees. This is mostly a problem for snapshots, where resolving one of these fuzzy back references would be O(number_of_snapshots) and quite slow. The solution used here is to use the fuzzy back references in the common case where a given tree block is only referenced by one root, and use the full back references when multiple roots have a reference on a given block. This commit adds per subvolume red-black tree to keep trace of cached inodes. The red-black tree helps the balancing code to find cached inodes whose inode numbers within a given range. This commit improves the balancing code by introducing several data structures to keep the state of balancing. The most important one is the back ref cache. It caches how the upper level tree blocks are referenced. This greatly reduce the overhead of checking back ref. The improved balancing code scales significantly better with a large number of snapshots. This is a very large commit and was written in a number of pieces. But, they depend heavily on the disk format change and were squashed together to make sure git bisect didn't end up in a bad state wrt space balancing or the format change. Signed-off-by: Yan Zheng <zheng.yan@oracle.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-06-10 22:45:14 +08:00
}
void btrfs_add_dropped_root(struct btrfs_trans_handle *trans,
struct btrfs_root *root)
{
struct btrfs_fs_info *fs_info = root->fs_info;
struct btrfs_transaction *cur_trans = trans->transaction;
/* Add ourselves to the transaction dropped list */
spin_lock(&cur_trans->dropped_roots_lock);
list_add_tail(&root->root_list, &cur_trans->dropped_roots);
spin_unlock(&cur_trans->dropped_roots_lock);
/* Make sure we don't try to update the root at commit time */
spin_lock(&fs_info->fs_roots_radix_lock);
radix_tree_tag_clear(&fs_info->fs_roots_radix,
(unsigned long)root->root_key.objectid,
BTRFS_ROOT_TRANS_TAG);
spin_unlock(&fs_info->fs_roots_radix_lock);
}
int btrfs_record_root_in_trans(struct btrfs_trans_handle *trans,
struct btrfs_root *root)
{
struct btrfs_fs_info *fs_info = root->fs_info;
int ret;
if (!test_bit(BTRFS_ROOT_SHAREABLE, &root->state))
return 0;
/*
* see record_root_in_trans for comments about IN_TRANS_SETUP usage
* and barriers
*/
smp_rmb();
if (root->last_trans == trans->transid &&
!test_bit(BTRFS_ROOT_IN_TRANS_SETUP, &root->state))
return 0;
mutex_lock(&fs_info->reloc_mutex);
ret = record_root_in_trans(trans, root, 0);
mutex_unlock(&fs_info->reloc_mutex);
return ret;
}
Btrfs: make the state of the transaction more readable We used 3 variants to track the state of the transaction, it was complex and wasted the memory space. Besides that, it was hard to understand that which types of the transaction handles should be blocked in each transaction state, so the developers often made mistakes. This patch improved the above problem. In this patch, we define 6 states for the transaction, enum btrfs_trans_state { TRANS_STATE_RUNNING = 0, TRANS_STATE_BLOCKED = 1, TRANS_STATE_COMMIT_START = 2, TRANS_STATE_COMMIT_DOING = 3, TRANS_STATE_UNBLOCKED = 4, TRANS_STATE_COMPLETED = 5, TRANS_STATE_MAX = 6, } and just use 1 variant to track those state. In order to make the blocked handle types for each state more clear, we introduce a array: unsigned int btrfs_blocked_trans_types[TRANS_STATE_MAX] = { [TRANS_STATE_RUNNING] = 0U, [TRANS_STATE_BLOCKED] = (__TRANS_USERSPACE | __TRANS_START), [TRANS_STATE_COMMIT_START] = (__TRANS_USERSPACE | __TRANS_START | __TRANS_ATTACH), [TRANS_STATE_COMMIT_DOING] = (__TRANS_USERSPACE | __TRANS_START | __TRANS_ATTACH | __TRANS_JOIN), [TRANS_STATE_UNBLOCKED] = (__TRANS_USERSPACE | __TRANS_START | __TRANS_ATTACH | __TRANS_JOIN | __TRANS_JOIN_NOLOCK), [TRANS_STATE_COMPLETED] = (__TRANS_USERSPACE | __TRANS_START | __TRANS_ATTACH | __TRANS_JOIN | __TRANS_JOIN_NOLOCK), } it is very intuitionistic. Besides that, because we remove ->in_commit in transaction structure, so the lock ->commit_lock which was used to protect it is unnecessary, remove ->commit_lock. Signed-off-by: Miao Xie <miaox@cn.fujitsu.com> Signed-off-by: Josef Bacik <jbacik@fusionio.com>
2013-05-17 11:53:43 +08:00
static inline int is_transaction_blocked(struct btrfs_transaction *trans)
{
return (trans->state >= TRANS_STATE_COMMIT_START &&
trans->state < TRANS_STATE_UNBLOCKED &&
!TRANS_ABORTED(trans));
Btrfs: make the state of the transaction more readable We used 3 variants to track the state of the transaction, it was complex and wasted the memory space. Besides that, it was hard to understand that which types of the transaction handles should be blocked in each transaction state, so the developers often made mistakes. This patch improved the above problem. In this patch, we define 6 states for the transaction, enum btrfs_trans_state { TRANS_STATE_RUNNING = 0, TRANS_STATE_BLOCKED = 1, TRANS_STATE_COMMIT_START = 2, TRANS_STATE_COMMIT_DOING = 3, TRANS_STATE_UNBLOCKED = 4, TRANS_STATE_COMPLETED = 5, TRANS_STATE_MAX = 6, } and just use 1 variant to track those state. In order to make the blocked handle types for each state more clear, we introduce a array: unsigned int btrfs_blocked_trans_types[TRANS_STATE_MAX] = { [TRANS_STATE_RUNNING] = 0U, [TRANS_STATE_BLOCKED] = (__TRANS_USERSPACE | __TRANS_START), [TRANS_STATE_COMMIT_START] = (__TRANS_USERSPACE | __TRANS_START | __TRANS_ATTACH), [TRANS_STATE_COMMIT_DOING] = (__TRANS_USERSPACE | __TRANS_START | __TRANS_ATTACH | __TRANS_JOIN), [TRANS_STATE_UNBLOCKED] = (__TRANS_USERSPACE | __TRANS_START | __TRANS_ATTACH | __TRANS_JOIN | __TRANS_JOIN_NOLOCK), [TRANS_STATE_COMPLETED] = (__TRANS_USERSPACE | __TRANS_START | __TRANS_ATTACH | __TRANS_JOIN | __TRANS_JOIN_NOLOCK), } it is very intuitionistic. Besides that, because we remove ->in_commit in transaction structure, so the lock ->commit_lock which was used to protect it is unnecessary, remove ->commit_lock. Signed-off-by: Miao Xie <miaox@cn.fujitsu.com> Signed-off-by: Josef Bacik <jbacik@fusionio.com>
2013-05-17 11:53:43 +08:00
}
/* wait for commit against the current transaction to become unblocked
* when this is done, it is safe to start a new transaction, but the current
* transaction might not be fully on disk.
*/
static void wait_current_trans(struct btrfs_fs_info *fs_info)
{
struct btrfs_transaction *cur_trans;
spin_lock(&fs_info->trans_lock);
cur_trans = fs_info->running_transaction;
Btrfs: make the state of the transaction more readable We used 3 variants to track the state of the transaction, it was complex and wasted the memory space. Besides that, it was hard to understand that which types of the transaction handles should be blocked in each transaction state, so the developers often made mistakes. This patch improved the above problem. In this patch, we define 6 states for the transaction, enum btrfs_trans_state { TRANS_STATE_RUNNING = 0, TRANS_STATE_BLOCKED = 1, TRANS_STATE_COMMIT_START = 2, TRANS_STATE_COMMIT_DOING = 3, TRANS_STATE_UNBLOCKED = 4, TRANS_STATE_COMPLETED = 5, TRANS_STATE_MAX = 6, } and just use 1 variant to track those state. In order to make the blocked handle types for each state more clear, we introduce a array: unsigned int btrfs_blocked_trans_types[TRANS_STATE_MAX] = { [TRANS_STATE_RUNNING] = 0U, [TRANS_STATE_BLOCKED] = (__TRANS_USERSPACE | __TRANS_START), [TRANS_STATE_COMMIT_START] = (__TRANS_USERSPACE | __TRANS_START | __TRANS_ATTACH), [TRANS_STATE_COMMIT_DOING] = (__TRANS_USERSPACE | __TRANS_START | __TRANS_ATTACH | __TRANS_JOIN), [TRANS_STATE_UNBLOCKED] = (__TRANS_USERSPACE | __TRANS_START | __TRANS_ATTACH | __TRANS_JOIN | __TRANS_JOIN_NOLOCK), [TRANS_STATE_COMPLETED] = (__TRANS_USERSPACE | __TRANS_START | __TRANS_ATTACH | __TRANS_JOIN | __TRANS_JOIN_NOLOCK), } it is very intuitionistic. Besides that, because we remove ->in_commit in transaction structure, so the lock ->commit_lock which was used to protect it is unnecessary, remove ->commit_lock. Signed-off-by: Miao Xie <miaox@cn.fujitsu.com> Signed-off-by: Josef Bacik <jbacik@fusionio.com>
2013-05-17 11:53:43 +08:00
if (cur_trans && is_transaction_blocked(cur_trans)) {
refcount_inc(&cur_trans->use_count);
spin_unlock(&fs_info->trans_lock);
wait_event(fs_info->transaction_wait,
cur_trans->state >= TRANS_STATE_UNBLOCKED ||
TRANS_ABORTED(cur_trans));
btrfs_put_transaction(cur_trans);
Btrfs: kill trans_mutex We use trans_mutex for lots of things, here's a basic list 1) To serialize trans_handles joining the currently running transaction 2) To make sure that no new trans handles are started while we are committing 3) To protect the dead_roots list and the transaction lists Really the serializing trans_handles joining is not too hard, and can really get bogged down in acquiring a reference to the transaction. So replace the trans_mutex with a trans_lock spinlock and use it to do the following 1) Protect fs_info->running_transaction. All trans handles have to do is check this, and then take a reference of the transaction and keep on going. 2) Protect the fs_info->trans_list. This doesn't get used too much, basically it just holds the current transactions, which will usually just be the currently committing transaction and the currently running transaction at most. 3) Protect the dead roots list. This is only ever processed by splicing the list so this is relatively simple. 4) Protect the fs_info->reloc_ctl stuff. This is very lightweight and was using the trans_mutex before, so this is a pretty straightforward change. 5) Protect fs_info->no_trans_join. Because we don't hold the trans_lock over the entirety of the commit we need to have a way to block new people from creating a new transaction while we're doing our work. So we set no_trans_join and in join_transaction we test to see if that is set, and if it is we do a wait_on_commit. 6) Make the transaction use count atomic so we don't need to take locks to modify it when we're dropping references. 7) Add a commit_lock to the transaction to make sure multiple people trying to commit the same transaction don't race and commit at the same time. 8) Make open_ioctl_trans an atomic so we don't have to take any locks for ioctl trans. I have tested this with xfstests, but obviously it is a pretty hairy change so lots of testing is greatly appreciated. Thanks, Signed-off-by: Josef Bacik <josef@redhat.com>
2011-04-12 05:25:13 +08:00
} else {
spin_unlock(&fs_info->trans_lock);
}
}
static int may_wait_transaction(struct btrfs_fs_info *fs_info, int type)
{
if (test_bit(BTRFS_FS_LOG_RECOVERING, &fs_info->flags))
Btrfs: kill trans_mutex We use trans_mutex for lots of things, here's a basic list 1) To serialize trans_handles joining the currently running transaction 2) To make sure that no new trans handles are started while we are committing 3) To protect the dead_roots list and the transaction lists Really the serializing trans_handles joining is not too hard, and can really get bogged down in acquiring a reference to the transaction. So replace the trans_mutex with a trans_lock spinlock and use it to do the following 1) Protect fs_info->running_transaction. All trans handles have to do is check this, and then take a reference of the transaction and keep on going. 2) Protect the fs_info->trans_list. This doesn't get used too much, basically it just holds the current transactions, which will usually just be the currently committing transaction and the currently running transaction at most. 3) Protect the dead roots list. This is only ever processed by splicing the list so this is relatively simple. 4) Protect the fs_info->reloc_ctl stuff. This is very lightweight and was using the trans_mutex before, so this is a pretty straightforward change. 5) Protect fs_info->no_trans_join. Because we don't hold the trans_lock over the entirety of the commit we need to have a way to block new people from creating a new transaction while we're doing our work. So we set no_trans_join and in join_transaction we test to see if that is set, and if it is we do a wait_on_commit. 6) Make the transaction use count atomic so we don't need to take locks to modify it when we're dropping references. 7) Add a commit_lock to the transaction to make sure multiple people trying to commit the same transaction don't race and commit at the same time. 8) Make open_ioctl_trans an atomic so we don't have to take any locks for ioctl trans. I have tested this with xfstests, but obviously it is a pretty hairy change so lots of testing is greatly appreciated. Thanks, Signed-off-by: Josef Bacik <josef@redhat.com>
2011-04-12 05:25:13 +08:00
return 0;
if (type == TRANS_START)
return 1;
Btrfs: kill trans_mutex We use trans_mutex for lots of things, here's a basic list 1) To serialize trans_handles joining the currently running transaction 2) To make sure that no new trans handles are started while we are committing 3) To protect the dead_roots list and the transaction lists Really the serializing trans_handles joining is not too hard, and can really get bogged down in acquiring a reference to the transaction. So replace the trans_mutex with a trans_lock spinlock and use it to do the following 1) Protect fs_info->running_transaction. All trans handles have to do is check this, and then take a reference of the transaction and keep on going. 2) Protect the fs_info->trans_list. This doesn't get used too much, basically it just holds the current transactions, which will usually just be the currently committing transaction and the currently running transaction at most. 3) Protect the dead roots list. This is only ever processed by splicing the list so this is relatively simple. 4) Protect the fs_info->reloc_ctl stuff. This is very lightweight and was using the trans_mutex before, so this is a pretty straightforward change. 5) Protect fs_info->no_trans_join. Because we don't hold the trans_lock over the entirety of the commit we need to have a way to block new people from creating a new transaction while we're doing our work. So we set no_trans_join and in join_transaction we test to see if that is set, and if it is we do a wait_on_commit. 6) Make the transaction use count atomic so we don't need to take locks to modify it when we're dropping references. 7) Add a commit_lock to the transaction to make sure multiple people trying to commit the same transaction don't race and commit at the same time. 8) Make open_ioctl_trans an atomic so we don't have to take any locks for ioctl trans. I have tested this with xfstests, but obviously it is a pretty hairy change so lots of testing is greatly appreciated. Thanks, Signed-off-by: Josef Bacik <josef@redhat.com>
2011-04-12 05:25:13 +08:00
return 0;
}
Btrfs: fix BUG_ON() casued by the reserved space migration When we did space balance and snapshot creation at the same time, we might meet the following oops: kernel BUG at fs/btrfs/inode.c:3038! [SNIP] Call Trace: [<ffffffffa0411ec7>] btrfs_orphan_cleanup+0x293/0x407 [btrfs] [<ffffffffa042dc45>] btrfs_mksubvol.isra.28+0x259/0x373 [btrfs] [<ffffffffa042de85>] btrfs_ioctl_snap_create_transid+0x126/0x156 [btrfs] [<ffffffffa042dff1>] btrfs_ioctl_snap_create_v2+0xd0/0x121 [btrfs] [<ffffffffa0430b2c>] btrfs_ioctl+0x414/0x1854 [btrfs] [<ffffffff813b60b7>] ? __do_page_fault+0x305/0x379 [<ffffffff811215a9>] vfs_ioctl+0x1d/0x39 [<ffffffff81121d7c>] do_vfs_ioctl+0x32d/0x3e2 [<ffffffff81057fe7>] ? finish_task_switch+0x80/0xb8 [<ffffffff81121e88>] SyS_ioctl+0x57/0x83 [<ffffffff813b39ff>] ? do_device_not_available+0x12/0x14 [<ffffffff813b99c2>] system_call_fastpath+0x16/0x1b [SNIP] RIP [<ffffffffa040da40>] btrfs_orphan_add+0xc3/0x126 [btrfs] The reason of the problem is that the relocation root creation stole the reserved space, which was reserved for orphan item deletion. There are several ways to fix this problem, one is to increasing the reserved space size of the space balace, and then we can use that space to create the relocation tree for each fs/file trees. But it is hard to calculate the suitable size because we doesn't know how many fs/file trees we need relocate. We fixed this problem by reserving the space for relocation root creation actively since the space it need is very small (one tree block, used for root node copy), then we use that reserved space to create the relocation tree. If we don't reserve space for relocation tree creation, we will use the reserved space of the balance. Signed-off-by: Miao Xie <miaox@cn.fujitsu.com> Signed-off-by: Josef Bacik <jbacik@fusionio.com> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2013-09-25 21:47:45 +08:00
static inline bool need_reserve_reloc_root(struct btrfs_root *root)
{
struct btrfs_fs_info *fs_info = root->fs_info;
if (!fs_info->reloc_ctl ||
!test_bit(BTRFS_ROOT_SHAREABLE, &root->state) ||
Btrfs: fix BUG_ON() casued by the reserved space migration When we did space balance and snapshot creation at the same time, we might meet the following oops: kernel BUG at fs/btrfs/inode.c:3038! [SNIP] Call Trace: [<ffffffffa0411ec7>] btrfs_orphan_cleanup+0x293/0x407 [btrfs] [<ffffffffa042dc45>] btrfs_mksubvol.isra.28+0x259/0x373 [btrfs] [<ffffffffa042de85>] btrfs_ioctl_snap_create_transid+0x126/0x156 [btrfs] [<ffffffffa042dff1>] btrfs_ioctl_snap_create_v2+0xd0/0x121 [btrfs] [<ffffffffa0430b2c>] btrfs_ioctl+0x414/0x1854 [btrfs] [<ffffffff813b60b7>] ? __do_page_fault+0x305/0x379 [<ffffffff811215a9>] vfs_ioctl+0x1d/0x39 [<ffffffff81121d7c>] do_vfs_ioctl+0x32d/0x3e2 [<ffffffff81057fe7>] ? finish_task_switch+0x80/0xb8 [<ffffffff81121e88>] SyS_ioctl+0x57/0x83 [<ffffffff813b39ff>] ? do_device_not_available+0x12/0x14 [<ffffffff813b99c2>] system_call_fastpath+0x16/0x1b [SNIP] RIP [<ffffffffa040da40>] btrfs_orphan_add+0xc3/0x126 [btrfs] The reason of the problem is that the relocation root creation stole the reserved space, which was reserved for orphan item deletion. There are several ways to fix this problem, one is to increasing the reserved space size of the space balace, and then we can use that space to create the relocation tree for each fs/file trees. But it is hard to calculate the suitable size because we doesn't know how many fs/file trees we need relocate. We fixed this problem by reserving the space for relocation root creation actively since the space it need is very small (one tree block, used for root node copy), then we use that reserved space to create the relocation tree. If we don't reserve space for relocation tree creation, we will use the reserved space of the balance. Signed-off-by: Miao Xie <miaox@cn.fujitsu.com> Signed-off-by: Josef Bacik <jbacik@fusionio.com> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2013-09-25 21:47:45 +08:00
root->root_key.objectid == BTRFS_TREE_RELOC_OBJECTID ||
root->reloc_root)
return false;
return true;
}
static struct btrfs_trans_handle *
start_transaction(struct btrfs_root *root, unsigned int num_items,
unsigned int type, enum btrfs_reserve_flush_enum flush,
bool enforce_qgroups)
{
struct btrfs_fs_info *fs_info = root->fs_info;
btrfs: introduce delayed_refs_rsv Traditionally we've had voodoo in btrfs to account for the space that delayed refs may take up by having a global_block_rsv. This works most of the time, except when it doesn't. We've had issues reported and seen in production where sometimes the global reserve is exhausted during transaction commit before we can run all of our delayed refs, resulting in an aborted transaction. Because of this voodoo we have equally dubious flushing semantics around throttling delayed refs which we often get wrong. So instead give them their own block_rsv. This way we can always know exactly how much outstanding space we need for delayed refs. This allows us to make sure we are constantly filling that reservation up with space, and allows us to put more precise pressure on the enospc system. Instead of doing math to see if its a good time to throttle, the normal enospc code will be invoked if we have a lot of delayed refs pending, and they will be run via the normal flushing mechanism. For now the delayed_refs_rsv will hold the reservations for the delayed refs, the block group updates, and deleting csums. We could have a separate rsv for the block group updates, but the csum deletion stuff is still handled via the delayed_refs so that will stay there. Historical background: The global reserve has grown to cover everything we don't reserve space explicitly for, and we've grown a lot of weird ad-hoc heuristics to know if we're running short on space and when it's time to force a commit. A failure rate of 20-40 file systems when we run hundreds of thousands of them isn't super high, but cleaning up this code will make things less ugly and more predictible. Thus the delayed refs rsv. We always know how many delayed refs we have outstanding, and although running them generates more we can use the global reserve for that spill over, which fits better into it's desired use than a full blown reservation. This first approach is to simply take how many times we're reserving space for and multiply that by 2 in order to save enough space for the delayed refs that could be generated. This is a niave approach and will probably evolve, but for now it works. Signed-off-by: Josef Bacik <jbacik@fb.com> Reviewed-by: David Sterba <dsterba@suse.com> # high-level review [ added background notes from the cover letter ] Signed-off-by: David Sterba <dsterba@suse.com>
2018-12-03 23:20:33 +08:00
struct btrfs_block_rsv *delayed_refs_rsv = &fs_info->delayed_refs_rsv;
struct btrfs_trans_handle *h;
struct btrfs_transaction *cur_trans;
u64 num_bytes = 0;
u64 qgroup_reserved = 0;
Btrfs: fix BUG_ON() casued by the reserved space migration When we did space balance and snapshot creation at the same time, we might meet the following oops: kernel BUG at fs/btrfs/inode.c:3038! [SNIP] Call Trace: [<ffffffffa0411ec7>] btrfs_orphan_cleanup+0x293/0x407 [btrfs] [<ffffffffa042dc45>] btrfs_mksubvol.isra.28+0x259/0x373 [btrfs] [<ffffffffa042de85>] btrfs_ioctl_snap_create_transid+0x126/0x156 [btrfs] [<ffffffffa042dff1>] btrfs_ioctl_snap_create_v2+0xd0/0x121 [btrfs] [<ffffffffa0430b2c>] btrfs_ioctl+0x414/0x1854 [btrfs] [<ffffffff813b60b7>] ? __do_page_fault+0x305/0x379 [<ffffffff811215a9>] vfs_ioctl+0x1d/0x39 [<ffffffff81121d7c>] do_vfs_ioctl+0x32d/0x3e2 [<ffffffff81057fe7>] ? finish_task_switch+0x80/0xb8 [<ffffffff81121e88>] SyS_ioctl+0x57/0x83 [<ffffffff813b39ff>] ? do_device_not_available+0x12/0x14 [<ffffffff813b99c2>] system_call_fastpath+0x16/0x1b [SNIP] RIP [<ffffffffa040da40>] btrfs_orphan_add+0xc3/0x126 [btrfs] The reason of the problem is that the relocation root creation stole the reserved space, which was reserved for orphan item deletion. There are several ways to fix this problem, one is to increasing the reserved space size of the space balace, and then we can use that space to create the relocation tree for each fs/file trees. But it is hard to calculate the suitable size because we doesn't know how many fs/file trees we need relocate. We fixed this problem by reserving the space for relocation root creation actively since the space it need is very small (one tree block, used for root node copy), then we use that reserved space to create the relocation tree. If we don't reserve space for relocation tree creation, we will use the reserved space of the balance. Signed-off-by: Miao Xie <miaox@cn.fujitsu.com> Signed-off-by: Josef Bacik <jbacik@fusionio.com> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2013-09-25 21:47:45 +08:00
bool reloc_reserved = false;
btrfs: force chunk allocation if our global rsv is larger than metadata Nikolay noticed a bunch of test failures with my global rsv steal patches. At first he thought they were introduced by them, but they've been failing for a while with 64k nodes. The problem is with 64k nodes we have a global reserve that calculates out to 13MiB on a freshly made file system, which only has 8MiB of metadata space. Because of changes I previously made we no longer account for the global reserve in the overcommit logic, which means we correctly allow overcommit to happen even though we are already overcommitted. However in some corner cases, for example btrfs/170, we will allocate the entire file system up with data chunks before we have enough space pressure to allocate a metadata chunk. Then once the fs is full we ENOSPC out because we cannot overcommit and the global reserve is taking up all of the available space. The most ideal way to deal with this is to change our space reservation stuff to take into account the height of the tree's that we're modifying, so that our global reserve calculation does not end up so obscenely large. However that is a huge undertaking. Instead fix this by forcing a chunk allocation if the global reserve is larger than the total metadata space. This gives us essentially the same behavior that happened before, we get a chunk allocated and these tests can pass. This is meant to be a stop-gap measure until we can tackle the "tree height only" project. Fixes: 0096420adb03 ("btrfs: do not account global reserve in can_overcommit") CC: stable@vger.kernel.org # 5.4+ Reviewed-by: Nikolay Borisov <nborisov@suse.com> Tested-by: Nikolay Borisov <nborisov@suse.com> Signed-off-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: David Sterba <dsterba@suse.com>
2020-03-14 03:28:48 +08:00
bool do_chunk_alloc = false;
Btrfs: fix BUG_ON() casued by the reserved space migration When we did space balance and snapshot creation at the same time, we might meet the following oops: kernel BUG at fs/btrfs/inode.c:3038! [SNIP] Call Trace: [<ffffffffa0411ec7>] btrfs_orphan_cleanup+0x293/0x407 [btrfs] [<ffffffffa042dc45>] btrfs_mksubvol.isra.28+0x259/0x373 [btrfs] [<ffffffffa042de85>] btrfs_ioctl_snap_create_transid+0x126/0x156 [btrfs] [<ffffffffa042dff1>] btrfs_ioctl_snap_create_v2+0xd0/0x121 [btrfs] [<ffffffffa0430b2c>] btrfs_ioctl+0x414/0x1854 [btrfs] [<ffffffff813b60b7>] ? __do_page_fault+0x305/0x379 [<ffffffff811215a9>] vfs_ioctl+0x1d/0x39 [<ffffffff81121d7c>] do_vfs_ioctl+0x32d/0x3e2 [<ffffffff81057fe7>] ? finish_task_switch+0x80/0xb8 [<ffffffff81121e88>] SyS_ioctl+0x57/0x83 [<ffffffff813b39ff>] ? do_device_not_available+0x12/0x14 [<ffffffff813b99c2>] system_call_fastpath+0x16/0x1b [SNIP] RIP [<ffffffffa040da40>] btrfs_orphan_add+0xc3/0x126 [btrfs] The reason of the problem is that the relocation root creation stole the reserved space, which was reserved for orphan item deletion. There are several ways to fix this problem, one is to increasing the reserved space size of the space balace, and then we can use that space to create the relocation tree for each fs/file trees. But it is hard to calculate the suitable size because we doesn't know how many fs/file trees we need relocate. We fixed this problem by reserving the space for relocation root creation actively since the space it need is very small (one tree block, used for root node copy), then we use that reserved space to create the relocation tree. If we don't reserve space for relocation tree creation, we will use the reserved space of the balance. Signed-off-by: Miao Xie <miaox@cn.fujitsu.com> Signed-off-by: Josef Bacik <jbacik@fusionio.com> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2013-09-25 21:47:45 +08:00
int ret;
if (BTRFS_FS_ERROR(fs_info))
return ERR_PTR(-EROFS);
if (current->journal_info) {
WARN_ON(type & TRANS_EXTWRITERS);
h = current->journal_info;
refcount_inc(&h->use_count);
WARN_ON(refcount_read(&h->use_count) > 2);
h->orig_rsv = h->block_rsv;
h->block_rsv = NULL;
goto got_it;
}
/*
* Do the reservation before we join the transaction so we can do all
* the appropriate flushing if need be.
*/
if (num_items && root != fs_info->chunk_root) {
btrfs: introduce delayed_refs_rsv Traditionally we've had voodoo in btrfs to account for the space that delayed refs may take up by having a global_block_rsv. This works most of the time, except when it doesn't. We've had issues reported and seen in production where sometimes the global reserve is exhausted during transaction commit before we can run all of our delayed refs, resulting in an aborted transaction. Because of this voodoo we have equally dubious flushing semantics around throttling delayed refs which we often get wrong. So instead give them their own block_rsv. This way we can always know exactly how much outstanding space we need for delayed refs. This allows us to make sure we are constantly filling that reservation up with space, and allows us to put more precise pressure on the enospc system. Instead of doing math to see if its a good time to throttle, the normal enospc code will be invoked if we have a lot of delayed refs pending, and they will be run via the normal flushing mechanism. For now the delayed_refs_rsv will hold the reservations for the delayed refs, the block group updates, and deleting csums. We could have a separate rsv for the block group updates, but the csum deletion stuff is still handled via the delayed_refs so that will stay there. Historical background: The global reserve has grown to cover everything we don't reserve space explicitly for, and we've grown a lot of weird ad-hoc heuristics to know if we're running short on space and when it's time to force a commit. A failure rate of 20-40 file systems when we run hundreds of thousands of them isn't super high, but cleaning up this code will make things less ugly and more predictible. Thus the delayed refs rsv. We always know how many delayed refs we have outstanding, and although running them generates more we can use the global reserve for that spill over, which fits better into it's desired use than a full blown reservation. This first approach is to simply take how many times we're reserving space for and multiply that by 2 in order to save enough space for the delayed refs that could be generated. This is a niave approach and will probably evolve, but for now it works. Signed-off-by: Josef Bacik <jbacik@fb.com> Reviewed-by: David Sterba <dsterba@suse.com> # high-level review [ added background notes from the cover letter ] Signed-off-by: David Sterba <dsterba@suse.com>
2018-12-03 23:20:33 +08:00
struct btrfs_block_rsv *rsv = &fs_info->trans_block_rsv;
u64 delayed_refs_bytes = 0;
qgroup_reserved = num_items * fs_info->nodesize;
ret = btrfs_qgroup_reserve_meta_pertrans(root, qgroup_reserved,
enforce_qgroups);
if (ret)
return ERR_PTR(ret);
btrfs: introduce delayed_refs_rsv Traditionally we've had voodoo in btrfs to account for the space that delayed refs may take up by having a global_block_rsv. This works most of the time, except when it doesn't. We've had issues reported and seen in production where sometimes the global reserve is exhausted during transaction commit before we can run all of our delayed refs, resulting in an aborted transaction. Because of this voodoo we have equally dubious flushing semantics around throttling delayed refs which we often get wrong. So instead give them their own block_rsv. This way we can always know exactly how much outstanding space we need for delayed refs. This allows us to make sure we are constantly filling that reservation up with space, and allows us to put more precise pressure on the enospc system. Instead of doing math to see if its a good time to throttle, the normal enospc code will be invoked if we have a lot of delayed refs pending, and they will be run via the normal flushing mechanism. For now the delayed_refs_rsv will hold the reservations for the delayed refs, the block group updates, and deleting csums. We could have a separate rsv for the block group updates, but the csum deletion stuff is still handled via the delayed_refs so that will stay there. Historical background: The global reserve has grown to cover everything we don't reserve space explicitly for, and we've grown a lot of weird ad-hoc heuristics to know if we're running short on space and when it's time to force a commit. A failure rate of 20-40 file systems when we run hundreds of thousands of them isn't super high, but cleaning up this code will make things less ugly and more predictible. Thus the delayed refs rsv. We always know how many delayed refs we have outstanding, and although running them generates more we can use the global reserve for that spill over, which fits better into it's desired use than a full blown reservation. This first approach is to simply take how many times we're reserving space for and multiply that by 2 in order to save enough space for the delayed refs that could be generated. This is a niave approach and will probably evolve, but for now it works. Signed-off-by: Josef Bacik <jbacik@fb.com> Reviewed-by: David Sterba <dsterba@suse.com> # high-level review [ added background notes from the cover letter ] Signed-off-by: David Sterba <dsterba@suse.com>
2018-12-03 23:20:33 +08:00
/*
* We want to reserve all the bytes we may need all at once, so
* we only do 1 enospc flushing cycle per transaction start. We
* accomplish this by simply assuming we'll do 2 x num_items
* worth of delayed refs updates in this trans handle, and
* refill that amount for whatever is missing in the reserve.
*/
num_bytes = btrfs_calc_insert_metadata_size(fs_info, num_items);
if (flush == BTRFS_RESERVE_FLUSH_ALL &&
delayed_refs_rsv->full == 0) {
btrfs: introduce delayed_refs_rsv Traditionally we've had voodoo in btrfs to account for the space that delayed refs may take up by having a global_block_rsv. This works most of the time, except when it doesn't. We've had issues reported and seen in production where sometimes the global reserve is exhausted during transaction commit before we can run all of our delayed refs, resulting in an aborted transaction. Because of this voodoo we have equally dubious flushing semantics around throttling delayed refs which we often get wrong. So instead give them their own block_rsv. This way we can always know exactly how much outstanding space we need for delayed refs. This allows us to make sure we are constantly filling that reservation up with space, and allows us to put more precise pressure on the enospc system. Instead of doing math to see if its a good time to throttle, the normal enospc code will be invoked if we have a lot of delayed refs pending, and they will be run via the normal flushing mechanism. For now the delayed_refs_rsv will hold the reservations for the delayed refs, the block group updates, and deleting csums. We could have a separate rsv for the block group updates, but the csum deletion stuff is still handled via the delayed_refs so that will stay there. Historical background: The global reserve has grown to cover everything we don't reserve space explicitly for, and we've grown a lot of weird ad-hoc heuristics to know if we're running short on space and when it's time to force a commit. A failure rate of 20-40 file systems when we run hundreds of thousands of them isn't super high, but cleaning up this code will make things less ugly and more predictible. Thus the delayed refs rsv. We always know how many delayed refs we have outstanding, and although running them generates more we can use the global reserve for that spill over, which fits better into it's desired use than a full blown reservation. This first approach is to simply take how many times we're reserving space for and multiply that by 2 in order to save enough space for the delayed refs that could be generated. This is a niave approach and will probably evolve, but for now it works. Signed-off-by: Josef Bacik <jbacik@fb.com> Reviewed-by: David Sterba <dsterba@suse.com> # high-level review [ added background notes from the cover letter ] Signed-off-by: David Sterba <dsterba@suse.com>
2018-12-03 23:20:33 +08:00
delayed_refs_bytes = num_bytes;
num_bytes <<= 1;
}
Btrfs: fix BUG_ON() casued by the reserved space migration When we did space balance and snapshot creation at the same time, we might meet the following oops: kernel BUG at fs/btrfs/inode.c:3038! [SNIP] Call Trace: [<ffffffffa0411ec7>] btrfs_orphan_cleanup+0x293/0x407 [btrfs] [<ffffffffa042dc45>] btrfs_mksubvol.isra.28+0x259/0x373 [btrfs] [<ffffffffa042de85>] btrfs_ioctl_snap_create_transid+0x126/0x156 [btrfs] [<ffffffffa042dff1>] btrfs_ioctl_snap_create_v2+0xd0/0x121 [btrfs] [<ffffffffa0430b2c>] btrfs_ioctl+0x414/0x1854 [btrfs] [<ffffffff813b60b7>] ? __do_page_fault+0x305/0x379 [<ffffffff811215a9>] vfs_ioctl+0x1d/0x39 [<ffffffff81121d7c>] do_vfs_ioctl+0x32d/0x3e2 [<ffffffff81057fe7>] ? finish_task_switch+0x80/0xb8 [<ffffffff81121e88>] SyS_ioctl+0x57/0x83 [<ffffffff813b39ff>] ? do_device_not_available+0x12/0x14 [<ffffffff813b99c2>] system_call_fastpath+0x16/0x1b [SNIP] RIP [<ffffffffa040da40>] btrfs_orphan_add+0xc3/0x126 [btrfs] The reason of the problem is that the relocation root creation stole the reserved space, which was reserved for orphan item deletion. There are several ways to fix this problem, one is to increasing the reserved space size of the space balace, and then we can use that space to create the relocation tree for each fs/file trees. But it is hard to calculate the suitable size because we doesn't know how many fs/file trees we need relocate. We fixed this problem by reserving the space for relocation root creation actively since the space it need is very small (one tree block, used for root node copy), then we use that reserved space to create the relocation tree. If we don't reserve space for relocation tree creation, we will use the reserved space of the balance. Signed-off-by: Miao Xie <miaox@cn.fujitsu.com> Signed-off-by: Josef Bacik <jbacik@fusionio.com> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2013-09-25 21:47:45 +08:00
/*
* Do the reservation for the relocation root creation
*/
if (need_reserve_reloc_root(root)) {
num_bytes += fs_info->nodesize;
Btrfs: fix BUG_ON() casued by the reserved space migration When we did space balance and snapshot creation at the same time, we might meet the following oops: kernel BUG at fs/btrfs/inode.c:3038! [SNIP] Call Trace: [<ffffffffa0411ec7>] btrfs_orphan_cleanup+0x293/0x407 [btrfs] [<ffffffffa042dc45>] btrfs_mksubvol.isra.28+0x259/0x373 [btrfs] [<ffffffffa042de85>] btrfs_ioctl_snap_create_transid+0x126/0x156 [btrfs] [<ffffffffa042dff1>] btrfs_ioctl_snap_create_v2+0xd0/0x121 [btrfs] [<ffffffffa0430b2c>] btrfs_ioctl+0x414/0x1854 [btrfs] [<ffffffff813b60b7>] ? __do_page_fault+0x305/0x379 [<ffffffff811215a9>] vfs_ioctl+0x1d/0x39 [<ffffffff81121d7c>] do_vfs_ioctl+0x32d/0x3e2 [<ffffffff81057fe7>] ? finish_task_switch+0x80/0xb8 [<ffffffff81121e88>] SyS_ioctl+0x57/0x83 [<ffffffff813b39ff>] ? do_device_not_available+0x12/0x14 [<ffffffff813b99c2>] system_call_fastpath+0x16/0x1b [SNIP] RIP [<ffffffffa040da40>] btrfs_orphan_add+0xc3/0x126 [btrfs] The reason of the problem is that the relocation root creation stole the reserved space, which was reserved for orphan item deletion. There are several ways to fix this problem, one is to increasing the reserved space size of the space balace, and then we can use that space to create the relocation tree for each fs/file trees. But it is hard to calculate the suitable size because we doesn't know how many fs/file trees we need relocate. We fixed this problem by reserving the space for relocation root creation actively since the space it need is very small (one tree block, used for root node copy), then we use that reserved space to create the relocation tree. If we don't reserve space for relocation tree creation, we will use the reserved space of the balance. Signed-off-by: Miao Xie <miaox@cn.fujitsu.com> Signed-off-by: Josef Bacik <jbacik@fusionio.com> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2013-09-25 21:47:45 +08:00
reloc_reserved = true;
}
ret = btrfs_block_rsv_add(fs_info, rsv, num_bytes, flush);
btrfs: introduce delayed_refs_rsv Traditionally we've had voodoo in btrfs to account for the space that delayed refs may take up by having a global_block_rsv. This works most of the time, except when it doesn't. We've had issues reported and seen in production where sometimes the global reserve is exhausted during transaction commit before we can run all of our delayed refs, resulting in an aborted transaction. Because of this voodoo we have equally dubious flushing semantics around throttling delayed refs which we often get wrong. So instead give them their own block_rsv. This way we can always know exactly how much outstanding space we need for delayed refs. This allows us to make sure we are constantly filling that reservation up with space, and allows us to put more precise pressure on the enospc system. Instead of doing math to see if its a good time to throttle, the normal enospc code will be invoked if we have a lot of delayed refs pending, and they will be run via the normal flushing mechanism. For now the delayed_refs_rsv will hold the reservations for the delayed refs, the block group updates, and deleting csums. We could have a separate rsv for the block group updates, but the csum deletion stuff is still handled via the delayed_refs so that will stay there. Historical background: The global reserve has grown to cover everything we don't reserve space explicitly for, and we've grown a lot of weird ad-hoc heuristics to know if we're running short on space and when it's time to force a commit. A failure rate of 20-40 file systems when we run hundreds of thousands of them isn't super high, but cleaning up this code will make things less ugly and more predictible. Thus the delayed refs rsv. We always know how many delayed refs we have outstanding, and although running them generates more we can use the global reserve for that spill over, which fits better into it's desired use than a full blown reservation. This first approach is to simply take how many times we're reserving space for and multiply that by 2 in order to save enough space for the delayed refs that could be generated. This is a niave approach and will probably evolve, but for now it works. Signed-off-by: Josef Bacik <jbacik@fb.com> Reviewed-by: David Sterba <dsterba@suse.com> # high-level review [ added background notes from the cover letter ] Signed-off-by: David Sterba <dsterba@suse.com>
2018-12-03 23:20:33 +08:00
if (ret)
goto reserve_fail;
if (delayed_refs_bytes) {
btrfs_migrate_to_delayed_refs_rsv(fs_info, rsv,
delayed_refs_bytes);
num_bytes -= delayed_refs_bytes;
}
btrfs: force chunk allocation if our global rsv is larger than metadata Nikolay noticed a bunch of test failures with my global rsv steal patches. At first he thought they were introduced by them, but they've been failing for a while with 64k nodes. The problem is with 64k nodes we have a global reserve that calculates out to 13MiB on a freshly made file system, which only has 8MiB of metadata space. Because of changes I previously made we no longer account for the global reserve in the overcommit logic, which means we correctly allow overcommit to happen even though we are already overcommitted. However in some corner cases, for example btrfs/170, we will allocate the entire file system up with data chunks before we have enough space pressure to allocate a metadata chunk. Then once the fs is full we ENOSPC out because we cannot overcommit and the global reserve is taking up all of the available space. The most ideal way to deal with this is to change our space reservation stuff to take into account the height of the tree's that we're modifying, so that our global reserve calculation does not end up so obscenely large. However that is a huge undertaking. Instead fix this by forcing a chunk allocation if the global reserve is larger than the total metadata space. This gives us essentially the same behavior that happened before, we get a chunk allocated and these tests can pass. This is meant to be a stop-gap measure until we can tackle the "tree height only" project. Fixes: 0096420adb03 ("btrfs: do not account global reserve in can_overcommit") CC: stable@vger.kernel.org # 5.4+ Reviewed-by: Nikolay Borisov <nborisov@suse.com> Tested-by: Nikolay Borisov <nborisov@suse.com> Signed-off-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: David Sterba <dsterba@suse.com>
2020-03-14 03:28:48 +08:00
if (rsv->space_info->force_alloc)
do_chunk_alloc = true;
btrfs: introduce delayed_refs_rsv Traditionally we've had voodoo in btrfs to account for the space that delayed refs may take up by having a global_block_rsv. This works most of the time, except when it doesn't. We've had issues reported and seen in production where sometimes the global reserve is exhausted during transaction commit before we can run all of our delayed refs, resulting in an aborted transaction. Because of this voodoo we have equally dubious flushing semantics around throttling delayed refs which we often get wrong. So instead give them their own block_rsv. This way we can always know exactly how much outstanding space we need for delayed refs. This allows us to make sure we are constantly filling that reservation up with space, and allows us to put more precise pressure on the enospc system. Instead of doing math to see if its a good time to throttle, the normal enospc code will be invoked if we have a lot of delayed refs pending, and they will be run via the normal flushing mechanism. For now the delayed_refs_rsv will hold the reservations for the delayed refs, the block group updates, and deleting csums. We could have a separate rsv for the block group updates, but the csum deletion stuff is still handled via the delayed_refs so that will stay there. Historical background: The global reserve has grown to cover everything we don't reserve space explicitly for, and we've grown a lot of weird ad-hoc heuristics to know if we're running short on space and when it's time to force a commit. A failure rate of 20-40 file systems when we run hundreds of thousands of them isn't super high, but cleaning up this code will make things less ugly and more predictible. Thus the delayed refs rsv. We always know how many delayed refs we have outstanding, and although running them generates more we can use the global reserve for that spill over, which fits better into it's desired use than a full blown reservation. This first approach is to simply take how many times we're reserving space for and multiply that by 2 in order to save enough space for the delayed refs that could be generated. This is a niave approach and will probably evolve, but for now it works. Signed-off-by: Josef Bacik <jbacik@fb.com> Reviewed-by: David Sterba <dsterba@suse.com> # high-level review [ added background notes from the cover letter ] Signed-off-by: David Sterba <dsterba@suse.com>
2018-12-03 23:20:33 +08:00
} else if (num_items == 0 && flush == BTRFS_RESERVE_FLUSH_ALL &&
!delayed_refs_rsv->full) {
/*
* Some people call with btrfs_start_transaction(root, 0)
* because they can be throttled, but have some other mechanism
* for reserving space. We still want these guys to refill the
* delayed block_rsv so just add 1 items worth of reservation
* here.
*/
ret = btrfs_delayed_refs_rsv_refill(fs_info, flush);
if (ret)
goto reserve_fail;
}
again:
h = kmem_cache_zalloc(btrfs_trans_handle_cachep, GFP_NOFS);
if (!h) {
ret = -ENOMEM;
goto alloc_fail;
}
/*
* If we are JOIN_NOLOCK we're already committing a transaction and
* waiting on this guy, so we don't need to do the sb_start_intwrite
* because we're already holding a ref. We need this because we could
* have raced in and did an fsync() on a file which can kick a commit
* and then we deadlock with somebody doing a freeze.
*
* If we are ATTACH, it means we just want to catch the current
* transaction and commit it, so we needn't do sb_start_intwrite().
*/
if (type & __TRANS_FREEZABLE)
sb_start_intwrite(fs_info->sb);
if (may_wait_transaction(fs_info, type))
wait_current_trans(fs_info);
Btrfs: kill trans_mutex We use trans_mutex for lots of things, here's a basic list 1) To serialize trans_handles joining the currently running transaction 2) To make sure that no new trans handles are started while we are committing 3) To protect the dead_roots list and the transaction lists Really the serializing trans_handles joining is not too hard, and can really get bogged down in acquiring a reference to the transaction. So replace the trans_mutex with a trans_lock spinlock and use it to do the following 1) Protect fs_info->running_transaction. All trans handles have to do is check this, and then take a reference of the transaction and keep on going. 2) Protect the fs_info->trans_list. This doesn't get used too much, basically it just holds the current transactions, which will usually just be the currently committing transaction and the currently running transaction at most. 3) Protect the dead roots list. This is only ever processed by splicing the list so this is relatively simple. 4) Protect the fs_info->reloc_ctl stuff. This is very lightweight and was using the trans_mutex before, so this is a pretty straightforward change. 5) Protect fs_info->no_trans_join. Because we don't hold the trans_lock over the entirety of the commit we need to have a way to block new people from creating a new transaction while we're doing our work. So we set no_trans_join and in join_transaction we test to see if that is set, and if it is we do a wait_on_commit. 6) Make the transaction use count atomic so we don't need to take locks to modify it when we're dropping references. 7) Add a commit_lock to the transaction to make sure multiple people trying to commit the same transaction don't race and commit at the same time. 8) Make open_ioctl_trans an atomic so we don't have to take any locks for ioctl trans. I have tested this with xfstests, but obviously it is a pretty hairy change so lots of testing is greatly appreciated. Thanks, Signed-off-by: Josef Bacik <josef@redhat.com>
2011-04-12 05:25:13 +08:00
do {
ret = join_transaction(fs_info, type);
if (ret == -EBUSY) {
wait_current_trans(fs_info);
Btrfs: fix deadlock between fiemap and transaction commits The fiemap handler locks a file range that can have unflushed delalloc, and after locking the range, it tries to attach to a running transaction. If the running transaction started its commit, that is, it is in state TRANS_STATE_COMMIT_START, and either the filesystem was mounted with the flushoncommit option or the transaction is creating a snapshot for the subvolume that contains the file that fiemap is operating on, we end up deadlocking. This happens because fiemap is blocked on the transaction, waiting for it to complete, and the transaction is waiting for the flushed dealloc to complete, which requires locking the file range that the fiemap task already locked. The following stack traces serve as an example of when this deadlock happens: (...) [404571.515510] Workqueue: btrfs-endio-write btrfs_endio_write_helper [btrfs] [404571.515956] Call Trace: [404571.516360] ? __schedule+0x3ae/0x7b0 [404571.516730] schedule+0x3a/0xb0 [404571.517104] lock_extent_bits+0x1ec/0x2a0 [btrfs] [404571.517465] ? remove_wait_queue+0x60/0x60 [404571.517832] btrfs_finish_ordered_io+0x292/0x800 [btrfs] [404571.518202] normal_work_helper+0xea/0x530 [btrfs] [404571.518566] process_one_work+0x21e/0x5c0 [404571.518990] worker_thread+0x4f/0x3b0 [404571.519413] ? process_one_work+0x5c0/0x5c0 [404571.519829] kthread+0x103/0x140 [404571.520191] ? kthread_create_worker_on_cpu+0x70/0x70 [404571.520565] ret_from_fork+0x3a/0x50 [404571.520915] kworker/u8:6 D 0 31651 2 0x80004000 [404571.521290] Workqueue: btrfs-flush_delalloc btrfs_flush_delalloc_helper [btrfs] (...) [404571.537000] fsstress D 0 13117 13115 0x00004000 [404571.537263] Call Trace: [404571.537524] ? __schedule+0x3ae/0x7b0 [404571.537788] schedule+0x3a/0xb0 [404571.538066] wait_current_trans+0xc8/0x100 [btrfs] [404571.538349] ? remove_wait_queue+0x60/0x60 [404571.538680] start_transaction+0x33c/0x500 [btrfs] [404571.539076] btrfs_check_shared+0xa3/0x1f0 [btrfs] [404571.539513] ? extent_fiemap+0x2ce/0x650 [btrfs] [404571.539866] extent_fiemap+0x2ce/0x650 [btrfs] [404571.540170] do_vfs_ioctl+0x526/0x6f0 [404571.540436] ksys_ioctl+0x70/0x80 [404571.540734] __x64_sys_ioctl+0x16/0x20 [404571.540997] do_syscall_64+0x60/0x1d0 [404571.541279] entry_SYSCALL_64_after_hwframe+0x49/0xbe (...) [404571.543729] btrfs D 0 14210 14208 0x00004000 [404571.544023] Call Trace: [404571.544275] ? __schedule+0x3ae/0x7b0 [404571.544526] ? wait_for_completion+0x112/0x1a0 [404571.544795] schedule+0x3a/0xb0 [404571.545064] schedule_timeout+0x1ff/0x390 [404571.545351] ? lock_acquire+0xa6/0x190 [404571.545638] ? wait_for_completion+0x49/0x1a0 [404571.545890] ? wait_for_completion+0x112/0x1a0 [404571.546228] wait_for_completion+0x131/0x1a0 [404571.546503] ? wake_up_q+0x70/0x70 [404571.546775] btrfs_wait_ordered_extents+0x27c/0x400 [btrfs] [404571.547159] btrfs_commit_transaction+0x3b0/0xae0 [btrfs] [404571.547449] ? btrfs_mksubvol+0x4a4/0x640 [btrfs] [404571.547703] ? remove_wait_queue+0x60/0x60 [404571.547969] btrfs_mksubvol+0x605/0x640 [btrfs] [404571.548226] ? __sb_start_write+0xd4/0x1c0 [404571.548512] ? mnt_want_write_file+0x24/0x50 [404571.548789] btrfs_ioctl_snap_create_transid+0x169/0x1a0 [btrfs] [404571.549048] btrfs_ioctl_snap_create_v2+0x11d/0x170 [btrfs] [404571.549307] btrfs_ioctl+0x133f/0x3150 [btrfs] [404571.549549] ? mem_cgroup_charge_statistics+0x4c/0xd0 [404571.549792] ? mem_cgroup_commit_charge+0x84/0x4b0 [404571.550064] ? __handle_mm_fault+0xe3e/0x11f0 [404571.550306] ? do_raw_spin_unlock+0x49/0xc0 [404571.550608] ? _raw_spin_unlock+0x24/0x30 [404571.550976] ? __handle_mm_fault+0xedf/0x11f0 [404571.551319] ? do_vfs_ioctl+0xa2/0x6f0 [404571.551659] ? btrfs_ioctl_get_supported_features+0x30/0x30 [btrfs] [404571.552087] do_vfs_ioctl+0xa2/0x6f0 [404571.552355] ksys_ioctl+0x70/0x80 [404571.552621] __x64_sys_ioctl+0x16/0x20 [404571.552864] do_syscall_64+0x60/0x1d0 [404571.553104] entry_SYSCALL_64_after_hwframe+0x49/0xbe (...) If we were joining the transaction instead of attaching to it, we would not risk a deadlock because a join only blocks if the transaction is in a state greater then or equals to TRANS_STATE_COMMIT_DOING, and the delalloc flush performed by a transaction is done before it reaches that state, when it is in the state TRANS_STATE_COMMIT_START. However a transaction join is intended for use cases where we do modify the filesystem, and fiemap only needs to peek at delayed references from the current transaction in order to determine if extents are shared, and, besides that, when there is no current transaction or when it blocks to wait for a current committing transaction to complete, it creates a new transaction without reserving any space. Such unnecessary transactions, besides doing unnecessary IO, can cause transaction aborts (-ENOSPC) and unnecessary rotation of the precious backup roots. So fix this by adding a new transaction join variant, named join_nostart, which behaves like the regular join, but it does not create a transaction when none currently exists or after waiting for a committing transaction to complete. Fixes: 03628cdbc64db6 ("Btrfs: do not start a transaction during fiemap") Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2019-07-29 16:37:10 +08:00
if (unlikely(type == TRANS_ATTACH ||
type == TRANS_JOIN_NOSTART))
ret = -ENOENT;
}
Btrfs: kill trans_mutex We use trans_mutex for lots of things, here's a basic list 1) To serialize trans_handles joining the currently running transaction 2) To make sure that no new trans handles are started while we are committing 3) To protect the dead_roots list and the transaction lists Really the serializing trans_handles joining is not too hard, and can really get bogged down in acquiring a reference to the transaction. So replace the trans_mutex with a trans_lock spinlock and use it to do the following 1) Protect fs_info->running_transaction. All trans handles have to do is check this, and then take a reference of the transaction and keep on going. 2) Protect the fs_info->trans_list. This doesn't get used too much, basically it just holds the current transactions, which will usually just be the currently committing transaction and the currently running transaction at most. 3) Protect the dead roots list. This is only ever processed by splicing the list so this is relatively simple. 4) Protect the fs_info->reloc_ctl stuff. This is very lightweight and was using the trans_mutex before, so this is a pretty straightforward change. 5) Protect fs_info->no_trans_join. Because we don't hold the trans_lock over the entirety of the commit we need to have a way to block new people from creating a new transaction while we're doing our work. So we set no_trans_join and in join_transaction we test to see if that is set, and if it is we do a wait_on_commit. 6) Make the transaction use count atomic so we don't need to take locks to modify it when we're dropping references. 7) Add a commit_lock to the transaction to make sure multiple people trying to commit the same transaction don't race and commit at the same time. 8) Make open_ioctl_trans an atomic so we don't have to take any locks for ioctl trans. I have tested this with xfstests, but obviously it is a pretty hairy change so lots of testing is greatly appreciated. Thanks, Signed-off-by: Josef Bacik <josef@redhat.com>
2011-04-12 05:25:13 +08:00
} while (ret == -EBUSY);
if (ret < 0)
goto join_fail;
cur_trans = fs_info->running_transaction;
h->transid = cur_trans->transid;
h->transaction = cur_trans;
refcount_set(&h->use_count, 1);
h->fs_info = root->fs_info;
h->type = type;
INIT_LIST_HEAD(&h->new_bgs);
smp_mb();
if (cur_trans->state >= TRANS_STATE_COMMIT_START &&
may_wait_transaction(fs_info, type)) {
Btrfs: fix crash when starting transaction Often when starting a transaction we commit the currently running transaction, which can end up writing block group caches when the current process has its journal_info set to NULL (and not to a transaction). This makes our assertion at btrfs_check_data_free_space() (current_journal != NULL) fail, resulting in a crash/hang. Therefore fix it by setting journal_info. Two different traces of this issue follow below. 1) [51502.241936] BTRFS: assertion failed: current->journal_info, file: fs/btrfs/extent-tree.c, line: 3670 [51502.242213] ------------[ cut here ]------------ [51502.242493] kernel BUG at fs/btrfs/ctree.h:3964! [51502.242669] invalid opcode: 0000 [#1] SMP DEBUG_PAGEALLOC (...) [51502.244010] Call Trace: [51502.244010] [<ffffffffa02bc025>] btrfs_check_data_free_space+0x395/0x3a0 [btrfs] [51502.244010] [<ffffffffa02c3bdc>] btrfs_write_dirty_block_groups+0x4ac/0x640 [btrfs] [51502.244010] [<ffffffffa0357a6a>] commit_cowonly_roots+0x164/0x226 [btrfs] [51502.244010] [<ffffffffa02d53cd>] btrfs_commit_transaction+0x4ed/0xab0 [btrfs] [51502.244010] [<ffffffff8168ec7b>] ? _raw_spin_unlock+0x2b/0x40 [51502.244010] [<ffffffffa02d6259>] start_transaction+0x459/0x620 [btrfs] [51502.244010] [<ffffffffa02d67ab>] btrfs_start_transaction+0x1b/0x20 [btrfs] [51502.244010] [<ffffffffa02d73e1>] __unlink_start_trans+0x31/0xe0 [btrfs] [51502.244010] [<ffffffffa02dea67>] btrfs_unlink+0x37/0xc0 [btrfs] [51502.244010] [<ffffffff811bb054>] ? do_unlinkat+0x114/0x2a0 [51502.244010] [<ffffffff811baebc>] vfs_unlink+0xcc/0x150 [51502.244010] [<ffffffff811bb1a0>] do_unlinkat+0x260/0x2a0 [51502.244010] [<ffffffff811a9ef4>] ? filp_close+0x64/0x90 [51502.244010] [<ffffffff810aaea6>] ? trace_hardirqs_on_caller+0x16/0x1e0 [51502.244010] [<ffffffff81349cab>] ? trace_hardirqs_on_thunk+0x3a/0x3f [51502.244010] [<ffffffff811be9eb>] SyS_unlinkat+0x1b/0x40 [51502.244010] [<ffffffff81698452>] system_call_fastpath+0x16/0x1b [51502.244010] Code: 0b 55 48 89 e5 0f 0b 55 48 89 e5 0f 0b 55 89 f1 48 c7 c2 71 13 36 a0 48 89 fe 31 c0 48 c7 c7 b8 43 36 a0 48 89 e5 e8 5d b0 32 e1 <0f> 0b 0f 1f 44 00 00 55 b9 11 00 00 00 48 89 e5 41 55 49 89 f5 [51502.244010] RIP [<ffffffffa03575da>] assfail.constprop.88+0x1e/0x20 [btrfs] 2) [25405.097230] BTRFS: assertion failed: current->journal_info, file: fs/btrfs/extent-tree.c, line: 3670 [25405.097488] ------------[ cut here ]------------ [25405.097767] kernel BUG at fs/btrfs/ctree.h:3964! [25405.097940] invalid opcode: 0000 [#1] SMP DEBUG_PAGEALLOC (...) [25405.100008] Call Trace: [25405.100008] [<ffffffffa02bc025>] btrfs_check_data_free_space+0x395/0x3a0 [btrfs] [25405.100008] [<ffffffffa02c3bdc>] btrfs_write_dirty_block_groups+0x4ac/0x640 [btrfs] [25405.100008] [<ffffffffa035755a>] commit_cowonly_roots+0x164/0x226 [btrfs] [25405.100008] [<ffffffffa02d53cd>] btrfs_commit_transaction+0x4ed/0xab0 [btrfs] [25405.100008] [<ffffffff8109c170>] ? bit_waitqueue+0xc0/0xc0 [25405.100008] [<ffffffffa02d6259>] start_transaction+0x459/0x620 [btrfs] [25405.100008] [<ffffffffa02d67ab>] btrfs_start_transaction+0x1b/0x20 [btrfs] [25405.100008] [<ffffffffa02e3407>] btrfs_create+0x47/0x210 [btrfs] [25405.100008] [<ffffffffa02d74cc>] ? btrfs_permission+0x3c/0x80 [btrfs] [25405.100008] [<ffffffff811bc63b>] vfs_create+0x9b/0x130 [25405.100008] [<ffffffff811bcf19>] do_last+0x849/0xe20 [25405.100008] [<ffffffff811b9409>] ? link_path_walk+0x79/0x820 [25405.100008] [<ffffffff811bd5b5>] path_openat+0xc5/0x690 [25405.100008] [<ffffffff810ab07d>] ? trace_hardirqs_on+0xd/0x10 [25405.100008] [<ffffffff811cdcd2>] ? __alloc_fd+0x32/0x1d0 [25405.100008] [<ffffffff811be2a3>] do_filp_open+0x43/0xa0 [25405.100008] [<ffffffff811cddf1>] ? __alloc_fd+0x151/0x1d0 [25405.100008] [<ffffffff811abcfc>] do_sys_open+0x13c/0x230 [25405.100008] [<ffffffff810aaea6>] ? trace_hardirqs_on_caller+0x16/0x1e0 [25405.100008] [<ffffffff811abe12>] SyS_open+0x22/0x30 [25405.100008] [<ffffffff81698452>] system_call_fastpath+0x16/0x1b [25405.100008] Code: 0b 55 48 89 e5 0f 0b 55 48 89 e5 0f 0b 55 89 f1 48 c7 c2 51 13 36 a0 48 89 fe 31 c0 48 c7 c7 d0 43 36 a0 48 89 e5 e8 6d b5 32 e1 <0f> 0b 0f 1f 44 00 00 55 b9 11 00 00 00 48 89 e5 41 55 49 89 f5 [25405.100008] RIP [<ffffffffa03570ca>] assfail.constprop.88+0x1e/0x20 [btrfs] Signed-off-by: Filipe David Borba Manana <fdmanana@gmail.com> Signed-off-by: Chris Mason <clm@fb.com>
2014-06-25 00:46:58 +08:00
current->journal_info = h;
btrfs_commit_transaction(h);
goto again;
}
if (num_bytes) {
trace_btrfs_space_reservation(fs_info, "transaction",
h->transid, num_bytes, 1);
h->block_rsv = &fs_info->trans_block_rsv;
h->bytes_reserved = num_bytes;
Btrfs: fix BUG_ON() casued by the reserved space migration When we did space balance and snapshot creation at the same time, we might meet the following oops: kernel BUG at fs/btrfs/inode.c:3038! [SNIP] Call Trace: [<ffffffffa0411ec7>] btrfs_orphan_cleanup+0x293/0x407 [btrfs] [<ffffffffa042dc45>] btrfs_mksubvol.isra.28+0x259/0x373 [btrfs] [<ffffffffa042de85>] btrfs_ioctl_snap_create_transid+0x126/0x156 [btrfs] [<ffffffffa042dff1>] btrfs_ioctl_snap_create_v2+0xd0/0x121 [btrfs] [<ffffffffa0430b2c>] btrfs_ioctl+0x414/0x1854 [btrfs] [<ffffffff813b60b7>] ? __do_page_fault+0x305/0x379 [<ffffffff811215a9>] vfs_ioctl+0x1d/0x39 [<ffffffff81121d7c>] do_vfs_ioctl+0x32d/0x3e2 [<ffffffff81057fe7>] ? finish_task_switch+0x80/0xb8 [<ffffffff81121e88>] SyS_ioctl+0x57/0x83 [<ffffffff813b39ff>] ? do_device_not_available+0x12/0x14 [<ffffffff813b99c2>] system_call_fastpath+0x16/0x1b [SNIP] RIP [<ffffffffa040da40>] btrfs_orphan_add+0xc3/0x126 [btrfs] The reason of the problem is that the relocation root creation stole the reserved space, which was reserved for orphan item deletion. There are several ways to fix this problem, one is to increasing the reserved space size of the space balace, and then we can use that space to create the relocation tree for each fs/file trees. But it is hard to calculate the suitable size because we doesn't know how many fs/file trees we need relocate. We fixed this problem by reserving the space for relocation root creation actively since the space it need is very small (one tree block, used for root node copy), then we use that reserved space to create the relocation tree. If we don't reserve space for relocation tree creation, we will use the reserved space of the balance. Signed-off-by: Miao Xie <miaox@cn.fujitsu.com> Signed-off-by: Josef Bacik <jbacik@fusionio.com> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2013-09-25 21:47:45 +08:00
h->reloc_reserved = reloc_reserved;
}
Btrfs: proper -ENOSPC handling At the start of a transaction we do a btrfs_reserve_metadata_space() and specify how many items we plan on modifying. Then once we've done our modifications and such, just call btrfs_unreserve_metadata_space() for the same number of items we reserved. For keeping track of metadata needed for data I've had to add an extent_io op for when we merge extents. This lets us track space properly when we are doing sequential writes, so we don't end up reserving way more metadata space than what we need. The only place where the metadata space accounting is not done is in the relocation code. This is because Yan is going to be reworking that code in the near future, so running btrfs-vol -b could still possibly result in a ENOSPC related panic. This patch also turns off the metadata_ratio stuff in order to allow users to more efficiently use their disk space. This patch makes it so we track how much metadata we need for an inode's delayed allocation extents by tracking how many extents are currently waiting for allocation. It introduces two new callbacks for the extent_io tree's, merge_extent_hook and split_extent_hook. These help us keep track of when we merge delalloc extents together and split them up. Reservations are handled prior to any actually dirty'ing occurs, and then we unreserve after we dirty. btrfs_unreserve_metadata_for_delalloc() will make the appropriate unreservations as needed based on the number of reservations we currently have and the number of extents we currently have. Doing the reservation outside of doing any of the actual dirty'ing lets us do things like filemap_flush() the inode to try and force delalloc to happen, or as a last resort actually start allocation on all delalloc inodes in the fs. This has survived dbench, fs_mark and an fsx torture test. Signed-off-by: Josef Bacik <jbacik@redhat.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-09-12 04:12:44 +08:00
got_it:
if (!current->journal_info)
current->journal_info = h;
btrfs: transaction: Avoid deadlock due to bad initialization timing of fs_info::journal_info [BUG] One run of btrfs/063 triggered the following lockdep warning: ============================================ WARNING: possible recursive locking detected 5.6.0-rc7-custom+ #48 Not tainted -------------------------------------------- kworker/u24:0/7 is trying to acquire lock: ffff88817d3a46e0 (sb_internal#2){.+.+}, at: start_transaction+0x66c/0x890 [btrfs] but task is already holding lock: ffff88817d3a46e0 (sb_internal#2){.+.+}, at: start_transaction+0x66c/0x890 [btrfs] other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(sb_internal#2); lock(sb_internal#2); *** DEADLOCK *** May be due to missing lock nesting notation 4 locks held by kworker/u24:0/7: #0: ffff88817b495948 ((wq_completion)btrfs-endio-write){+.+.}, at: process_one_work+0x557/0xb80 #1: ffff888189ea7db8 ((work_completion)(&work->normal_work)){+.+.}, at: process_one_work+0x557/0xb80 #2: ffff88817d3a46e0 (sb_internal#2){.+.+}, at: start_transaction+0x66c/0x890 [btrfs] #3: ffff888174ca4da8 (&fs_info->reloc_mutex){+.+.}, at: btrfs_record_root_in_trans+0x83/0xd0 [btrfs] stack backtrace: CPU: 0 PID: 7 Comm: kworker/u24:0 Not tainted 5.6.0-rc7-custom+ #48 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015 Workqueue: btrfs-endio-write btrfs_work_helper [btrfs] Call Trace: dump_stack+0xc2/0x11a __lock_acquire.cold+0xce/0x214 lock_acquire+0xe6/0x210 __sb_start_write+0x14e/0x290 start_transaction+0x66c/0x890 [btrfs] btrfs_join_transaction+0x1d/0x20 [btrfs] find_free_extent+0x1504/0x1a50 [btrfs] btrfs_reserve_extent+0xd5/0x1f0 [btrfs] btrfs_alloc_tree_block+0x1ac/0x570 [btrfs] btrfs_copy_root+0x213/0x580 [btrfs] create_reloc_root+0x3bd/0x470 [btrfs] btrfs_init_reloc_root+0x2d2/0x310 [btrfs] record_root_in_trans+0x191/0x1d0 [btrfs] btrfs_record_root_in_trans+0x90/0xd0 [btrfs] start_transaction+0x16e/0x890 [btrfs] btrfs_join_transaction+0x1d/0x20 [btrfs] btrfs_finish_ordered_io+0x55d/0xcd0 [btrfs] finish_ordered_fn+0x15/0x20 [btrfs] btrfs_work_helper+0x116/0x9a0 [btrfs] process_one_work+0x632/0xb80 worker_thread+0x80/0x690 kthread+0x1a3/0x1f0 ret_from_fork+0x27/0x50 It's pretty hard to reproduce, only one hit so far. [CAUSE] This is because we're calling btrfs_join_transaction() without re-using the current running one: btrfs_finish_ordered_io() |- btrfs_join_transaction() <<< Call #1 |- btrfs_record_root_in_trans() |- btrfs_reserve_extent() |- btrfs_join_transaction() <<< Call #2 Normally such btrfs_join_transaction() call should re-use the existing one, without trying to re-start a transaction. But the problem is, in btrfs_join_transaction() call #1, we call btrfs_record_root_in_trans() before initializing current::journal_info. And in btrfs_join_transaction() call #2, we're relying on current::journal_info to avoid such deadlock. [FIX] Call btrfs_record_root_in_trans() after we have initialized current::journal_info. CC: stable@vger.kernel.org # 4.4+ Signed-off-by: Qu Wenruo <wqu@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2020-04-27 14:50:14 +08:00
btrfs: force chunk allocation if our global rsv is larger than metadata Nikolay noticed a bunch of test failures with my global rsv steal patches. At first he thought they were introduced by them, but they've been failing for a while with 64k nodes. The problem is with 64k nodes we have a global reserve that calculates out to 13MiB on a freshly made file system, which only has 8MiB of metadata space. Because of changes I previously made we no longer account for the global reserve in the overcommit logic, which means we correctly allow overcommit to happen even though we are already overcommitted. However in some corner cases, for example btrfs/170, we will allocate the entire file system up with data chunks before we have enough space pressure to allocate a metadata chunk. Then once the fs is full we ENOSPC out because we cannot overcommit and the global reserve is taking up all of the available space. The most ideal way to deal with this is to change our space reservation stuff to take into account the height of the tree's that we're modifying, so that our global reserve calculation does not end up so obscenely large. However that is a huge undertaking. Instead fix this by forcing a chunk allocation if the global reserve is larger than the total metadata space. This gives us essentially the same behavior that happened before, we get a chunk allocated and these tests can pass. This is meant to be a stop-gap measure until we can tackle the "tree height only" project. Fixes: 0096420adb03 ("btrfs: do not account global reserve in can_overcommit") CC: stable@vger.kernel.org # 5.4+ Reviewed-by: Nikolay Borisov <nborisov@suse.com> Tested-by: Nikolay Borisov <nborisov@suse.com> Signed-off-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: David Sterba <dsterba@suse.com>
2020-03-14 03:28:48 +08:00
/*
* If the space_info is marked ALLOC_FORCE then we'll get upgraded to
* ALLOC_FORCE the first run through, and then we won't allocate for
* anybody else who races in later. We don't care about the return
* value here.
*/
if (do_chunk_alloc && num_bytes) {
u64 flags = h->block_rsv->space_info->flags;
btrfs_chunk_alloc(h, btrfs_get_alloc_profile(fs_info, flags),
CHUNK_ALLOC_NO_FORCE);
}
btrfs: transaction: Avoid deadlock due to bad initialization timing of fs_info::journal_info [BUG] One run of btrfs/063 triggered the following lockdep warning: ============================================ WARNING: possible recursive locking detected 5.6.0-rc7-custom+ #48 Not tainted -------------------------------------------- kworker/u24:0/7 is trying to acquire lock: ffff88817d3a46e0 (sb_internal#2){.+.+}, at: start_transaction+0x66c/0x890 [btrfs] but task is already holding lock: ffff88817d3a46e0 (sb_internal#2){.+.+}, at: start_transaction+0x66c/0x890 [btrfs] other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(sb_internal#2); lock(sb_internal#2); *** DEADLOCK *** May be due to missing lock nesting notation 4 locks held by kworker/u24:0/7: #0: ffff88817b495948 ((wq_completion)btrfs-endio-write){+.+.}, at: process_one_work+0x557/0xb80 #1: ffff888189ea7db8 ((work_completion)(&work->normal_work)){+.+.}, at: process_one_work+0x557/0xb80 #2: ffff88817d3a46e0 (sb_internal#2){.+.+}, at: start_transaction+0x66c/0x890 [btrfs] #3: ffff888174ca4da8 (&fs_info->reloc_mutex){+.+.}, at: btrfs_record_root_in_trans+0x83/0xd0 [btrfs] stack backtrace: CPU: 0 PID: 7 Comm: kworker/u24:0 Not tainted 5.6.0-rc7-custom+ #48 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015 Workqueue: btrfs-endio-write btrfs_work_helper [btrfs] Call Trace: dump_stack+0xc2/0x11a __lock_acquire.cold+0xce/0x214 lock_acquire+0xe6/0x210 __sb_start_write+0x14e/0x290 start_transaction+0x66c/0x890 [btrfs] btrfs_join_transaction+0x1d/0x20 [btrfs] find_free_extent+0x1504/0x1a50 [btrfs] btrfs_reserve_extent+0xd5/0x1f0 [btrfs] btrfs_alloc_tree_block+0x1ac/0x570 [btrfs] btrfs_copy_root+0x213/0x580 [btrfs] create_reloc_root+0x3bd/0x470 [btrfs] btrfs_init_reloc_root+0x2d2/0x310 [btrfs] record_root_in_trans+0x191/0x1d0 [btrfs] btrfs_record_root_in_trans+0x90/0xd0 [btrfs] start_transaction+0x16e/0x890 [btrfs] btrfs_join_transaction+0x1d/0x20 [btrfs] btrfs_finish_ordered_io+0x55d/0xcd0 [btrfs] finish_ordered_fn+0x15/0x20 [btrfs] btrfs_work_helper+0x116/0x9a0 [btrfs] process_one_work+0x632/0xb80 worker_thread+0x80/0x690 kthread+0x1a3/0x1f0 ret_from_fork+0x27/0x50 It's pretty hard to reproduce, only one hit so far. [CAUSE] This is because we're calling btrfs_join_transaction() without re-using the current running one: btrfs_finish_ordered_io() |- btrfs_join_transaction() <<< Call #1 |- btrfs_record_root_in_trans() |- btrfs_reserve_extent() |- btrfs_join_transaction() <<< Call #2 Normally such btrfs_join_transaction() call should re-use the existing one, without trying to re-start a transaction. But the problem is, in btrfs_join_transaction() call #1, we call btrfs_record_root_in_trans() before initializing current::journal_info. And in btrfs_join_transaction() call #2, we're relying on current::journal_info to avoid such deadlock. [FIX] Call btrfs_record_root_in_trans() after we have initialized current::journal_info. CC: stable@vger.kernel.org # 4.4+ Signed-off-by: Qu Wenruo <wqu@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2020-04-27 14:50:14 +08:00
/*
* btrfs_record_root_in_trans() needs to alloc new extents, and may
* call btrfs_join_transaction() while we're also starting a
* transaction.
*
* Thus it need to be called after current->journal_info initialized,
* or we can deadlock.
*/
ret = btrfs_record_root_in_trans(h, root);
if (ret) {
/*
* The transaction handle is fully initialized and linked with
* other structures so it needs to be ended in case of errors,
* not just freed.
*/
btrfs_end_transaction(h);
return ERR_PTR(ret);
}
btrfs: transaction: Avoid deadlock due to bad initialization timing of fs_info::journal_info [BUG] One run of btrfs/063 triggered the following lockdep warning: ============================================ WARNING: possible recursive locking detected 5.6.0-rc7-custom+ #48 Not tainted -------------------------------------------- kworker/u24:0/7 is trying to acquire lock: ffff88817d3a46e0 (sb_internal#2){.+.+}, at: start_transaction+0x66c/0x890 [btrfs] but task is already holding lock: ffff88817d3a46e0 (sb_internal#2){.+.+}, at: start_transaction+0x66c/0x890 [btrfs] other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(sb_internal#2); lock(sb_internal#2); *** DEADLOCK *** May be due to missing lock nesting notation 4 locks held by kworker/u24:0/7: #0: ffff88817b495948 ((wq_completion)btrfs-endio-write){+.+.}, at: process_one_work+0x557/0xb80 #1: ffff888189ea7db8 ((work_completion)(&work->normal_work)){+.+.}, at: process_one_work+0x557/0xb80 #2: ffff88817d3a46e0 (sb_internal#2){.+.+}, at: start_transaction+0x66c/0x890 [btrfs] #3: ffff888174ca4da8 (&fs_info->reloc_mutex){+.+.}, at: btrfs_record_root_in_trans+0x83/0xd0 [btrfs] stack backtrace: CPU: 0 PID: 7 Comm: kworker/u24:0 Not tainted 5.6.0-rc7-custom+ #48 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015 Workqueue: btrfs-endio-write btrfs_work_helper [btrfs] Call Trace: dump_stack+0xc2/0x11a __lock_acquire.cold+0xce/0x214 lock_acquire+0xe6/0x210 __sb_start_write+0x14e/0x290 start_transaction+0x66c/0x890 [btrfs] btrfs_join_transaction+0x1d/0x20 [btrfs] find_free_extent+0x1504/0x1a50 [btrfs] btrfs_reserve_extent+0xd5/0x1f0 [btrfs] btrfs_alloc_tree_block+0x1ac/0x570 [btrfs] btrfs_copy_root+0x213/0x580 [btrfs] create_reloc_root+0x3bd/0x470 [btrfs] btrfs_init_reloc_root+0x2d2/0x310 [btrfs] record_root_in_trans+0x191/0x1d0 [btrfs] btrfs_record_root_in_trans+0x90/0xd0 [btrfs] start_transaction+0x16e/0x890 [btrfs] btrfs_join_transaction+0x1d/0x20 [btrfs] btrfs_finish_ordered_io+0x55d/0xcd0 [btrfs] finish_ordered_fn+0x15/0x20 [btrfs] btrfs_work_helper+0x116/0x9a0 [btrfs] process_one_work+0x632/0xb80 worker_thread+0x80/0x690 kthread+0x1a3/0x1f0 ret_from_fork+0x27/0x50 It's pretty hard to reproduce, only one hit so far. [CAUSE] This is because we're calling btrfs_join_transaction() without re-using the current running one: btrfs_finish_ordered_io() |- btrfs_join_transaction() <<< Call #1 |- btrfs_record_root_in_trans() |- btrfs_reserve_extent() |- btrfs_join_transaction() <<< Call #2 Normally such btrfs_join_transaction() call should re-use the existing one, without trying to re-start a transaction. But the problem is, in btrfs_join_transaction() call #1, we call btrfs_record_root_in_trans() before initializing current::journal_info. And in btrfs_join_transaction() call #2, we're relying on current::journal_info to avoid such deadlock. [FIX] Call btrfs_record_root_in_trans() after we have initialized current::journal_info. CC: stable@vger.kernel.org # 4.4+ Signed-off-by: Qu Wenruo <wqu@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2020-04-27 14:50:14 +08:00
return h;
join_fail:
if (type & __TRANS_FREEZABLE)
sb_end_intwrite(fs_info->sb);
kmem_cache_free(btrfs_trans_handle_cachep, h);
alloc_fail:
if (num_bytes)
btrfs_block_rsv_release(fs_info, &fs_info->trans_block_rsv,
num_bytes, NULL);
reserve_fail:
btrfs_qgroup_free_meta_pertrans(root, qgroup_reserved);
return ERR_PTR(ret);
}
struct btrfs_trans_handle *btrfs_start_transaction(struct btrfs_root *root,
unsigned int num_items)
{
return start_transaction(root, num_items, TRANS_START,
BTRFS_RESERVE_FLUSH_ALL, true);
}
struct btrfs_trans_handle *btrfs_start_transaction_fallback_global_rsv(
struct btrfs_root *root,
unsigned int num_items)
{
return start_transaction(root, num_items, TRANS_START,
BTRFS_RESERVE_FLUSH_ALL_STEAL, false);
}
struct btrfs_trans_handle *btrfs_join_transaction(struct btrfs_root *root)
{
return start_transaction(root, 0, TRANS_JOIN, BTRFS_RESERVE_NO_FLUSH,
true);
}
struct btrfs_trans_handle *btrfs_join_transaction_spacecache(struct btrfs_root *root)
{
return start_transaction(root, 0, TRANS_JOIN_NOLOCK,
BTRFS_RESERVE_NO_FLUSH, true);
}
Btrfs: fix deadlock between fiemap and transaction commits The fiemap handler locks a file range that can have unflushed delalloc, and after locking the range, it tries to attach to a running transaction. If the running transaction started its commit, that is, it is in state TRANS_STATE_COMMIT_START, and either the filesystem was mounted with the flushoncommit option or the transaction is creating a snapshot for the subvolume that contains the file that fiemap is operating on, we end up deadlocking. This happens because fiemap is blocked on the transaction, waiting for it to complete, and the transaction is waiting for the flushed dealloc to complete, which requires locking the file range that the fiemap task already locked. The following stack traces serve as an example of when this deadlock happens: (...) [404571.515510] Workqueue: btrfs-endio-write btrfs_endio_write_helper [btrfs] [404571.515956] Call Trace: [404571.516360] ? __schedule+0x3ae/0x7b0 [404571.516730] schedule+0x3a/0xb0 [404571.517104] lock_extent_bits+0x1ec/0x2a0 [btrfs] [404571.517465] ? remove_wait_queue+0x60/0x60 [404571.517832] btrfs_finish_ordered_io+0x292/0x800 [btrfs] [404571.518202] normal_work_helper+0xea/0x530 [btrfs] [404571.518566] process_one_work+0x21e/0x5c0 [404571.518990] worker_thread+0x4f/0x3b0 [404571.519413] ? process_one_work+0x5c0/0x5c0 [404571.519829] kthread+0x103/0x140 [404571.520191] ? kthread_create_worker_on_cpu+0x70/0x70 [404571.520565] ret_from_fork+0x3a/0x50 [404571.520915] kworker/u8:6 D 0 31651 2 0x80004000 [404571.521290] Workqueue: btrfs-flush_delalloc btrfs_flush_delalloc_helper [btrfs] (...) [404571.537000] fsstress D 0 13117 13115 0x00004000 [404571.537263] Call Trace: [404571.537524] ? __schedule+0x3ae/0x7b0 [404571.537788] schedule+0x3a/0xb0 [404571.538066] wait_current_trans+0xc8/0x100 [btrfs] [404571.538349] ? remove_wait_queue+0x60/0x60 [404571.538680] start_transaction+0x33c/0x500 [btrfs] [404571.539076] btrfs_check_shared+0xa3/0x1f0 [btrfs] [404571.539513] ? extent_fiemap+0x2ce/0x650 [btrfs] [404571.539866] extent_fiemap+0x2ce/0x650 [btrfs] [404571.540170] do_vfs_ioctl+0x526/0x6f0 [404571.540436] ksys_ioctl+0x70/0x80 [404571.540734] __x64_sys_ioctl+0x16/0x20 [404571.540997] do_syscall_64+0x60/0x1d0 [404571.541279] entry_SYSCALL_64_after_hwframe+0x49/0xbe (...) [404571.543729] btrfs D 0 14210 14208 0x00004000 [404571.544023] Call Trace: [404571.544275] ? __schedule+0x3ae/0x7b0 [404571.544526] ? wait_for_completion+0x112/0x1a0 [404571.544795] schedule+0x3a/0xb0 [404571.545064] schedule_timeout+0x1ff/0x390 [404571.545351] ? lock_acquire+0xa6/0x190 [404571.545638] ? wait_for_completion+0x49/0x1a0 [404571.545890] ? wait_for_completion+0x112/0x1a0 [404571.546228] wait_for_completion+0x131/0x1a0 [404571.546503] ? wake_up_q+0x70/0x70 [404571.546775] btrfs_wait_ordered_extents+0x27c/0x400 [btrfs] [404571.547159] btrfs_commit_transaction+0x3b0/0xae0 [btrfs] [404571.547449] ? btrfs_mksubvol+0x4a4/0x640 [btrfs] [404571.547703] ? remove_wait_queue+0x60/0x60 [404571.547969] btrfs_mksubvol+0x605/0x640 [btrfs] [404571.548226] ? __sb_start_write+0xd4/0x1c0 [404571.548512] ? mnt_want_write_file+0x24/0x50 [404571.548789] btrfs_ioctl_snap_create_transid+0x169/0x1a0 [btrfs] [404571.549048] btrfs_ioctl_snap_create_v2+0x11d/0x170 [btrfs] [404571.549307] btrfs_ioctl+0x133f/0x3150 [btrfs] [404571.549549] ? mem_cgroup_charge_statistics+0x4c/0xd0 [404571.549792] ? mem_cgroup_commit_charge+0x84/0x4b0 [404571.550064] ? __handle_mm_fault+0xe3e/0x11f0 [404571.550306] ? do_raw_spin_unlock+0x49/0xc0 [404571.550608] ? _raw_spin_unlock+0x24/0x30 [404571.550976] ? __handle_mm_fault+0xedf/0x11f0 [404571.551319] ? do_vfs_ioctl+0xa2/0x6f0 [404571.551659] ? btrfs_ioctl_get_supported_features+0x30/0x30 [btrfs] [404571.552087] do_vfs_ioctl+0xa2/0x6f0 [404571.552355] ksys_ioctl+0x70/0x80 [404571.552621] __x64_sys_ioctl+0x16/0x20 [404571.552864] do_syscall_64+0x60/0x1d0 [404571.553104] entry_SYSCALL_64_after_hwframe+0x49/0xbe (...) If we were joining the transaction instead of attaching to it, we would not risk a deadlock because a join only blocks if the transaction is in a state greater then or equals to TRANS_STATE_COMMIT_DOING, and the delalloc flush performed by a transaction is done before it reaches that state, when it is in the state TRANS_STATE_COMMIT_START. However a transaction join is intended for use cases where we do modify the filesystem, and fiemap only needs to peek at delayed references from the current transaction in order to determine if extents are shared, and, besides that, when there is no current transaction or when it blocks to wait for a current committing transaction to complete, it creates a new transaction without reserving any space. Such unnecessary transactions, besides doing unnecessary IO, can cause transaction aborts (-ENOSPC) and unnecessary rotation of the precious backup roots. So fix this by adding a new transaction join variant, named join_nostart, which behaves like the regular join, but it does not create a transaction when none currently exists or after waiting for a committing transaction to complete. Fixes: 03628cdbc64db6 ("Btrfs: do not start a transaction during fiemap") Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2019-07-29 16:37:10 +08:00
/*
* Similar to regular join but it never starts a transaction when none is
* running or after waiting for the current one to finish.
*/
struct btrfs_trans_handle *btrfs_join_transaction_nostart(struct btrfs_root *root)
{
return start_transaction(root, 0, TRANS_JOIN_NOSTART,
BTRFS_RESERVE_NO_FLUSH, true);
}
/*
* btrfs_attach_transaction() - catch the running transaction
*
* It is used when we want to commit the current the transaction, but
* don't want to start a new one.
*
* Note: If this function return -ENOENT, it just means there is no
* running transaction. But it is possible that the inactive transaction
* is still in the memory, not fully on disk. If you hope there is no
* inactive transaction in the fs when -ENOENT is returned, you should
* invoke
* btrfs_attach_transaction_barrier()
*/
struct btrfs_trans_handle *btrfs_attach_transaction(struct btrfs_root *root)
{
return start_transaction(root, 0, TRANS_ATTACH,
BTRFS_RESERVE_NO_FLUSH, true);
}
/*
* btrfs_attach_transaction_barrier() - catch the running transaction
*
* It is similar to the above function, the difference is this one
* will wait for all the inactive transactions until they fully
* complete.
*/
struct btrfs_trans_handle *
btrfs_attach_transaction_barrier(struct btrfs_root *root)
{
struct btrfs_trans_handle *trans;
trans = start_transaction(root, 0, TRANS_ATTACH,
BTRFS_RESERVE_NO_FLUSH, true);
if (trans == ERR_PTR(-ENOENT))
btrfs_wait_for_commit(root->fs_info, 0);
return trans;
}
btrfs: make concurrent fsyncs wait less when waiting for a transaction commit Often an fsync needs to fallback to a transaction commit for several reasons (to ensure consistency after a power failure, a new block group was allocated or a temporary error such as ENOMEM or ENOSPC happened). In that case the log is marked as needing a full commit and any concurrent tasks attempting to log inodes or commit the log will also fallback to the transaction commit. When this happens they all wait for the task that first started the transaction commit to finish the transaction commit - however they wait until the full transaction commit happens, which is not needed, as they only need to wait for the superblocks to be persisted and not for unpinning all the extents pinned during the transaction's lifetime, which even for short lived transactions can be a few thousand and take some significant amount of time to complete - for dbench workloads I have observed up to 4~5 milliseconds of time spent unpinning extents in the worst cases, and the number of pinned extents was between 2 to 3 thousand. So allow fsync tasks to skip waiting for the unpinning of extents when they call btrfs_commit_transaction() and they were not the task that started the transaction commit (that one has to do it, the alternative would be to offload the transaction commit to another task so that it could avoid waiting for the extent unpinning or offload the extent unpinning to another task). This patch is part of a patchset comprised of the following patches: btrfs: remove unnecessary directory inode item update when deleting dir entry btrfs: stop setting nbytes when filling inode item for logging btrfs: avoid logging new ancestor inodes when logging new inode btrfs: skip logging directories already logged when logging all parents btrfs: skip logging inodes already logged when logging new entries btrfs: remove unnecessary check_parent_dirs_for_sync() btrfs: make concurrent fsyncs wait less when waiting for a transaction commit After applying the entire patchset, dbench shows improvements in respect to throughput and latency. The script used to measure it is the following: $ cat dbench-test.sh #!/bin/bash DEV=/dev/sdk MNT=/mnt/sdk MOUNT_OPTIONS="-o ssd" MKFS_OPTIONS="-m single -d single" echo "performance" | tee /sys/devices/system/cpu/cpu*/cpufreq/scaling_governor umount $DEV &> /dev/null mkfs.btrfs -f $MKFS_OPTIONS $DEV mount $MOUNT_OPTIONS $DEV $MNT dbench -D $MNT -t 300 64 umount $MNT The test was run on a physical machine with 12 cores (Intel corei7), 64G of ram, using a NVMe device and a non-debug kernel configuration (Debian's default configuration). Before applying patchset, 32 clients: Operation Count AvgLat MaxLat ---------------------------------------- NTCreateX 9627107 0.153 61.938 Close 7072076 0.001 3.175 Rename 407633 1.222 44.439 Unlink 1943895 0.658 44.440 Deltree 256 17.339 110.891 Mkdir 128 0.003 0.009 Qpathinfo 8725406 0.064 17.850 Qfileinfo 1529516 0.001 2.188 Qfsinfo 1599884 0.002 1.457 Sfileinfo 784200 0.005 3.562 Find 3373513 0.411 30.312 WriteX 4802132 0.053 29.054 ReadX 15089959 0.002 5.801 LockX 31344 0.002 0.425 UnlockX 31344 0.001 0.173 Flush 674724 5.952 341.830 Throughput 1008.02 MB/sec 32 clients 32 procs max_latency=341.833 ms After applying patchset, 32 clients: After patchset, with 32 clients: Operation Count AvgLat MaxLat ---------------------------------------- NTCreateX 9931568 0.111 25.597 Close 7295730 0.001 2.171 Rename 420549 0.982 49.714 Unlink 2005366 0.497 39.015 Deltree 256 11.149 89.242 Mkdir 128 0.002 0.014 Qpathinfo 9001863 0.049 20.761 Qfileinfo 1577730 0.001 2.546 Qfsinfo 1650508 0.002 3.531 Sfileinfo 809031 0.005 5.846 Find 3480259 0.309 23.977 WriteX 4952505 0.043 41.283 ReadX 15568127 0.002 5.476 LockX 32338 0.002 0.978 UnlockX 32338 0.001 2.032 Flush 696017 7.485 228.835 Throughput 1049.91 MB/sec 32 clients 32 procs max_latency=228.847 ms --> +4.1% throughput, -39.6% max latency Before applying patchset, 64 clients: Operation Count AvgLat MaxLat ---------------------------------------- NTCreateX 8956748 0.342 108.312 Close 6579660 0.001 3.823 Rename 379209 2.396 81.897 Unlink 1808625 1.108 131.148 Deltree 256 25.632 172.176 Mkdir 128 0.003 0.018 Qpathinfo 8117615 0.131 55.916 Qfileinfo 1423495 0.001 2.635 Qfsinfo 1488496 0.002 5.412 Sfileinfo 729472 0.007 8.643 Find 3138598 0.855 78.321 WriteX 4470783 0.102 79.442 ReadX 14038139 0.002 7.578 LockX 29158 0.002 0.844 UnlockX 29158 0.001 0.567 Flush 627746 14.168 506.151 Throughput 924.738 MB/sec 64 clients 64 procs max_latency=506.154 ms After applying patchset, 64 clients: Operation Count AvgLat MaxLat ---------------------------------------- NTCreateX 9069003 0.303 43.193 Close 6662328 0.001 3.888 Rename 383976 2.194 46.418 Unlink 1831080 1.022 43.873 Deltree 256 24.037 155.763 Mkdir 128 0.002 0.005 Qpathinfo 8219173 0.137 30.233 Qfileinfo 1441203 0.001 3.204 Qfsinfo 1507092 0.002 4.055 Sfileinfo 738775 0.006 5.431 Find 3177874 0.936 38.170 WriteX 4526152 0.084 39.518 ReadX 14213562 0.002 24.760 LockX 29522 0.002 1.221 UnlockX 29522 0.001 0.694 Flush 635652 14.358 422.039 Throughput 990.13 MB/sec 64 clients 64 procs max_latency=422.043 ms --> +6.8% throughput, -18.1% max latency Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2021-01-27 18:35:00 +08:00
/* Wait for a transaction commit to reach at least the given state. */
static noinline void wait_for_commit(struct btrfs_transaction *commit,
const enum btrfs_trans_state min_state)
{
btrfs: fix relocation crash due to premature return from btrfs_commit_transaction() We are seeing crashes similar to the following trace: [38.969182] WARNING: CPU: 20 PID: 2105 at fs/btrfs/relocation.c:4070 btrfs_relocate_block_group+0x2dc/0x340 [btrfs] [38.973556] CPU: 20 PID: 2105 Comm: btrfs Not tainted 5.17.0-rc4 #54 [38.974580] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.0-59-gc9ba5276e321-prebuilt.qemu.org 04/01/2014 [38.976539] RIP: 0010:btrfs_relocate_block_group+0x2dc/0x340 [btrfs] [38.980336] RSP: 0000:ffffb0dd42e03c20 EFLAGS: 00010206 [38.981218] RAX: ffff96cfc4ede800 RBX: ffff96cfc3ce0000 RCX: 000000000002ca14 [38.982560] RDX: 0000000000000000 RSI: 4cfd109a0bcb5d7f RDI: ffff96cfc3ce0360 [38.983619] RBP: ffff96cfc309c000 R08: 0000000000000000 R09: 0000000000000000 [38.984678] R10: ffff96cec0000001 R11: ffffe84c80000000 R12: ffff96cfc4ede800 [38.985735] R13: 0000000000000000 R14: 0000000000000000 R15: ffff96cfc3ce0360 [38.987146] FS: 00007f11c15218c0(0000) GS:ffff96d6dfb00000(0000) knlGS:0000000000000000 [38.988662] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [38.989398] CR2: 00007ffc922c8e60 CR3: 00000001147a6001 CR4: 0000000000370ee0 [38.990279] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [38.991219] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [38.992528] Call Trace: [38.992854] <TASK> [38.993148] btrfs_relocate_chunk+0x27/0xe0 [btrfs] [38.993941] btrfs_balance+0x78e/0xea0 [btrfs] [38.994801] ? vsnprintf+0x33c/0x520 [38.995368] ? __kmalloc_track_caller+0x351/0x440 [38.996198] btrfs_ioctl_balance+0x2b9/0x3a0 [btrfs] [38.997084] btrfs_ioctl+0x11b0/0x2da0 [btrfs] [38.997867] ? mod_objcg_state+0xee/0x340 [38.998552] ? seq_release+0x24/0x30 [38.999184] ? proc_nr_files+0x30/0x30 [38.999654] ? call_rcu+0xc8/0x2f0 [39.000228] ? __x64_sys_ioctl+0x84/0xc0 [39.000872] ? btrfs_ioctl_get_supported_features+0x30/0x30 [btrfs] [39.001973] __x64_sys_ioctl+0x84/0xc0 [39.002566] do_syscall_64+0x3a/0x80 [39.003011] entry_SYSCALL_64_after_hwframe+0x44/0xae [39.003735] RIP: 0033:0x7f11c166959b [39.007324] RSP: 002b:00007fff2543e998 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 [39.008521] RAX: ffffffffffffffda RBX: 00007f11c1521698 RCX: 00007f11c166959b [39.009833] RDX: 00007fff2543ea40 RSI: 00000000c4009420 RDI: 0000000000000003 [39.011270] RBP: 0000000000000003 R08: 0000000000000013 R09: 00007f11c16f94e0 [39.012581] R10: 0000000000000000 R11: 0000000000000246 R12: 00007fff25440df3 [39.014046] R13: 0000000000000000 R14: 00007fff2543ea40 R15: 0000000000000001 [39.015040] </TASK> [39.015418] ---[ end trace 0000000000000000 ]--- [43.131559] ------------[ cut here ]------------ [43.132234] kernel BUG at fs/btrfs/extent-tree.c:2717! [43.133031] invalid opcode: 0000 [#1] PREEMPT SMP PTI [43.133702] CPU: 1 PID: 1839 Comm: btrfs Tainted: G W 5.17.0-rc4 #54 [43.134863] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.0-59-gc9ba5276e321-prebuilt.qemu.org 04/01/2014 [43.136426] RIP: 0010:unpin_extent_range+0x37a/0x4f0 [btrfs] [43.139913] RSP: 0000:ffffb0dd4216bc70 EFLAGS: 00010246 [43.140629] RAX: 0000000000000000 RBX: ffff96cfc34490f8 RCX: 0000000000000001 [43.141604] RDX: 0000000080000001 RSI: 0000000051d00000 RDI: 00000000ffffffff [43.142645] RBP: 0000000000000000 R08: 0000000000000000 R09: ffff96cfd07dca50 [43.143669] R10: ffff96cfc46e8a00 R11: fffffffffffec000 R12: 0000000041d00000 [43.144657] R13: ffff96cfc3ce0000 R14: ffffb0dd4216bd08 R15: 0000000000000000 [43.145686] FS: 00007f7657dd68c0(0000) GS:ffff96d6df640000(0000) knlGS:0000000000000000 [43.146808] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [43.147584] CR2: 00007f7fe81bf5b0 CR3: 00000001093ee004 CR4: 0000000000370ee0 [43.148589] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [43.149581] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [43.150559] Call Trace: [43.150904] <TASK> [43.151253] btrfs_finish_extent_commit+0x88/0x290 [btrfs] [43.152127] btrfs_commit_transaction+0x74f/0xaa0 [btrfs] [43.152932] ? btrfs_attach_transaction_barrier+0x1e/0x50 [btrfs] [43.153786] btrfs_ioctl+0x1edc/0x2da0 [btrfs] [43.154475] ? __check_object_size+0x150/0x170 [43.155170] ? preempt_count_add+0x49/0xa0 [43.155753] ? __x64_sys_ioctl+0x84/0xc0 [43.156437] ? btrfs_ioctl_get_supported_features+0x30/0x30 [btrfs] [43.157456] __x64_sys_ioctl+0x84/0xc0 [43.157980] do_syscall_64+0x3a/0x80 [43.158543] entry_SYSCALL_64_after_hwframe+0x44/0xae [43.159231] RIP: 0033:0x7f7657f1e59b [43.161819] RSP: 002b:00007ffda5cd1658 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 [43.162702] RAX: ffffffffffffffda RBX: 0000000000000001 RCX: 00007f7657f1e59b [43.163526] RDX: 0000000000000000 RSI: 0000000000009408 RDI: 0000000000000003 [43.164358] RBP: 0000000000000003 R08: 0000000000000000 R09: 0000000000000000 [43.165208] R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 [43.166029] R13: 00005621b91c3232 R14: 00005621b91ba580 R15: 00007ffda5cd1800 [43.166863] </TASK> [43.167125] Modules linked in: btrfs blake2b_generic xor pata_acpi ata_piix libata raid6_pq scsi_mod libcrc32c virtio_net virtio_rng net_failover rng_core failover scsi_common [43.169552] ---[ end trace 0000000000000000 ]--- [43.171226] RIP: 0010:unpin_extent_range+0x37a/0x4f0 [btrfs] [43.174767] RSP: 0000:ffffb0dd4216bc70 EFLAGS: 00010246 [43.175600] RAX: 0000000000000000 RBX: ffff96cfc34490f8 RCX: 0000000000000001 [43.176468] RDX: 0000000080000001 RSI: 0000000051d00000 RDI: 00000000ffffffff [43.177357] RBP: 0000000000000000 R08: 0000000000000000 R09: ffff96cfd07dca50 [43.178271] R10: ffff96cfc46e8a00 R11: fffffffffffec000 R12: 0000000041d00000 [43.179178] R13: ffff96cfc3ce0000 R14: ffffb0dd4216bd08 R15: 0000000000000000 [43.180071] FS: 00007f7657dd68c0(0000) GS:ffff96d6df800000(0000) knlGS:0000000000000000 [43.181073] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [43.181808] CR2: 00007fe09905f010 CR3: 00000001093ee004 CR4: 0000000000370ee0 [43.182706] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [43.183591] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 We first hit the WARN_ON(rc->block_group->pinned > 0) in btrfs_relocate_block_group() and then the BUG_ON(!cache) in unpin_extent_range(). This tells us that we are exiting relocation and removing the block group with bytes still pinned for that block group. This is supposed to be impossible: the last thing relocate_block_group() does is commit the transaction to get rid of pinned extents. Commit d0c2f4fa555e ("btrfs: make concurrent fsyncs wait less when waiting for a transaction commit") introduced an optimization so that commits from fsync don't have to wait for the previous commit to unpin extents. This was only intended to affect fsync, but it inadvertently made it possible for any commit to skip waiting for the previous commit to unpin. This is because if a call to btrfs_commit_transaction() finds that another thread is already committing the transaction, it waits for the other thread to complete the commit and then returns. If that other thread was in fsync, then it completes the commit without completing the previous commit. This makes the following sequence of events possible: Thread 1____________________|Thread 2 (fsync)_____________________|Thread 3 (balance)___________________ btrfs_commit_transaction(N) | | btrfs_run_delayed_refs | | pin extents | | ... | | state = UNBLOCKED |btrfs_sync_file | | btrfs_start_transaction(N + 1) |relocate_block_group | | btrfs_join_transaction(N + 1) | btrfs_commit_transaction(N + 1) | ... | trans->state = COMMIT_START | | | btrfs_commit_transaction(N + 1) | | wait_for_commit(N + 1, COMPLETED) | wait_for_commit(N, SUPER_COMMITTED)| state = SUPER_COMMITTED | ... | btrfs_finish_extent_commit| | unpin_extent_range() | trans->state = COMPLETED | | | return | | ... | |Thread 1 isn't done, so pinned > 0 | |and we WARN | | | |btrfs_remove_block_group unpin_extent_range() | | Thread 3 removed the | | block group, so we BUG| | There are other sequences involving SUPER_COMMITTED transactions that can cause a similar outcome. We could fix this by making relocation explicitly wait for unpinning, but there may be other cases that need it. Josef mentioned ENOSPC flushing and the free space cache inode as other potential victims. Rather than playing whack-a-mole, this fix is conservative and makes all commits not in fsync wait for all previous transactions, which is what the optimization intended. Fixes: d0c2f4fa555e ("btrfs: make concurrent fsyncs wait less when waiting for a transaction commit") CC: stable@vger.kernel.org # 5.15+ Reviewed-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: Omar Sandoval <osandov@fb.com> Signed-off-by: David Sterba <dsterba@suse.com>
2022-02-18 07:14:43 +08:00
struct btrfs_fs_info *fs_info = commit->fs_info;
u64 transid = commit->transid;
bool put = false;
while (1) {
wait_event(commit->commit_wait, commit->state >= min_state);
if (put)
btrfs_put_transaction(commit);
if (min_state < TRANS_STATE_COMPLETED)
break;
/*
* A transaction isn't really completed until all of the
* previous transactions are completed, but with fsync we can
* end up with SUPER_COMMITTED transactions before a COMPLETED
* transaction. Wait for those.
*/
spin_lock(&fs_info->trans_lock);
commit = list_first_entry_or_null(&fs_info->trans_list,
struct btrfs_transaction,
list);
if (!commit || commit->transid > transid) {
spin_unlock(&fs_info->trans_lock);
break;
}
refcount_inc(&commit->use_count);
put = true;
spin_unlock(&fs_info->trans_lock);
}
}
int btrfs_wait_for_commit(struct btrfs_fs_info *fs_info, u64 transid)
Btrfs: add START_SYNC, WAIT_SYNC ioctls START_SYNC will start a sync/commit, but not wait for it to complete. Any modification started after the ioctl returns is guaranteed not to be included in the commit. If a non-NULL pointer is passed, the transaction id will be returned to userspace. WAIT_SYNC will wait for any in-progress commit to complete. If a transaction id is specified, the ioctl will block and then return (success) when the specified transaction has committed. If it has already committed when we call the ioctl, it returns immediately. If the specified transaction doesn't exist, it returns EINVAL. If no transaction id is specified, WAIT_SYNC will wait for the currently committing transaction to finish it's commit to disk. If there is no currently committing transaction, it returns success. These ioctls are useful for applications which want to impose an ordering on when fs modifications reach disk, but do not want to wait for the full (slow) commit process to do so. Picky callers can take the transid returned by START_SYNC and feed it to WAIT_SYNC, and be certain to wait only as long as necessary for the transaction _they_ started to reach disk. Sloppy callers can START_SYNC and WAIT_SYNC without a transid, and provided they didn't wait too long between the calls, they will get the same result. However, if a second commit starts before they call WAIT_SYNC, they may end up waiting longer for it to commit as well. Even so, a START_SYNC+WAIT_SYNC still guarantees that any operation completed before the START_SYNC reaches disk. Signed-off-by: Sage Weil <sage@newdream.net> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2010-10-30 03:41:32 +08:00
{
struct btrfs_transaction *cur_trans = NULL, *t;
int ret = 0;
Btrfs: add START_SYNC, WAIT_SYNC ioctls START_SYNC will start a sync/commit, but not wait for it to complete. Any modification started after the ioctl returns is guaranteed not to be included in the commit. If a non-NULL pointer is passed, the transaction id will be returned to userspace. WAIT_SYNC will wait for any in-progress commit to complete. If a transaction id is specified, the ioctl will block and then return (success) when the specified transaction has committed. If it has already committed when we call the ioctl, it returns immediately. If the specified transaction doesn't exist, it returns EINVAL. If no transaction id is specified, WAIT_SYNC will wait for the currently committing transaction to finish it's commit to disk. If there is no currently committing transaction, it returns success. These ioctls are useful for applications which want to impose an ordering on when fs modifications reach disk, but do not want to wait for the full (slow) commit process to do so. Picky callers can take the transid returned by START_SYNC and feed it to WAIT_SYNC, and be certain to wait only as long as necessary for the transaction _they_ started to reach disk. Sloppy callers can START_SYNC and WAIT_SYNC without a transid, and provided they didn't wait too long between the calls, they will get the same result. However, if a second commit starts before they call WAIT_SYNC, they may end up waiting longer for it to commit as well. Even so, a START_SYNC+WAIT_SYNC still guarantees that any operation completed before the START_SYNC reaches disk. Signed-off-by: Sage Weil <sage@newdream.net> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2010-10-30 03:41:32 +08:00
if (transid) {
if (transid <= fs_info->last_trans_committed)
Btrfs: kill trans_mutex We use trans_mutex for lots of things, here's a basic list 1) To serialize trans_handles joining the currently running transaction 2) To make sure that no new trans handles are started while we are committing 3) To protect the dead_roots list and the transaction lists Really the serializing trans_handles joining is not too hard, and can really get bogged down in acquiring a reference to the transaction. So replace the trans_mutex with a trans_lock spinlock and use it to do the following 1) Protect fs_info->running_transaction. All trans handles have to do is check this, and then take a reference of the transaction and keep on going. 2) Protect the fs_info->trans_list. This doesn't get used too much, basically it just holds the current transactions, which will usually just be the currently committing transaction and the currently running transaction at most. 3) Protect the dead roots list. This is only ever processed by splicing the list so this is relatively simple. 4) Protect the fs_info->reloc_ctl stuff. This is very lightweight and was using the trans_mutex before, so this is a pretty straightforward change. 5) Protect fs_info->no_trans_join. Because we don't hold the trans_lock over the entirety of the commit we need to have a way to block new people from creating a new transaction while we're doing our work. So we set no_trans_join and in join_transaction we test to see if that is set, and if it is we do a wait_on_commit. 6) Make the transaction use count atomic so we don't need to take locks to modify it when we're dropping references. 7) Add a commit_lock to the transaction to make sure multiple people trying to commit the same transaction don't race and commit at the same time. 8) Make open_ioctl_trans an atomic so we don't have to take any locks for ioctl trans. I have tested this with xfstests, but obviously it is a pretty hairy change so lots of testing is greatly appreciated. Thanks, Signed-off-by: Josef Bacik <josef@redhat.com>
2011-04-12 05:25:13 +08:00
goto out;
Btrfs: add START_SYNC, WAIT_SYNC ioctls START_SYNC will start a sync/commit, but not wait for it to complete. Any modification started after the ioctl returns is guaranteed not to be included in the commit. If a non-NULL pointer is passed, the transaction id will be returned to userspace. WAIT_SYNC will wait for any in-progress commit to complete. If a transaction id is specified, the ioctl will block and then return (success) when the specified transaction has committed. If it has already committed when we call the ioctl, it returns immediately. If the specified transaction doesn't exist, it returns EINVAL. If no transaction id is specified, WAIT_SYNC will wait for the currently committing transaction to finish it's commit to disk. If there is no currently committing transaction, it returns success. These ioctls are useful for applications which want to impose an ordering on when fs modifications reach disk, but do not want to wait for the full (slow) commit process to do so. Picky callers can take the transid returned by START_SYNC and feed it to WAIT_SYNC, and be certain to wait only as long as necessary for the transaction _they_ started to reach disk. Sloppy callers can START_SYNC and WAIT_SYNC without a transid, and provided they didn't wait too long between the calls, they will get the same result. However, if a second commit starts before they call WAIT_SYNC, they may end up waiting longer for it to commit as well. Even so, a START_SYNC+WAIT_SYNC still guarantees that any operation completed before the START_SYNC reaches disk. Signed-off-by: Sage Weil <sage@newdream.net> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2010-10-30 03:41:32 +08:00
/* find specified transaction */
spin_lock(&fs_info->trans_lock);
list_for_each_entry(t, &fs_info->trans_list, list) {
Btrfs: add START_SYNC, WAIT_SYNC ioctls START_SYNC will start a sync/commit, but not wait for it to complete. Any modification started after the ioctl returns is guaranteed not to be included in the commit. If a non-NULL pointer is passed, the transaction id will be returned to userspace. WAIT_SYNC will wait for any in-progress commit to complete. If a transaction id is specified, the ioctl will block and then return (success) when the specified transaction has committed. If it has already committed when we call the ioctl, it returns immediately. If the specified transaction doesn't exist, it returns EINVAL. If no transaction id is specified, WAIT_SYNC will wait for the currently committing transaction to finish it's commit to disk. If there is no currently committing transaction, it returns success. These ioctls are useful for applications which want to impose an ordering on when fs modifications reach disk, but do not want to wait for the full (slow) commit process to do so. Picky callers can take the transid returned by START_SYNC and feed it to WAIT_SYNC, and be certain to wait only as long as necessary for the transaction _they_ started to reach disk. Sloppy callers can START_SYNC and WAIT_SYNC without a transid, and provided they didn't wait too long between the calls, they will get the same result. However, if a second commit starts before they call WAIT_SYNC, they may end up waiting longer for it to commit as well. Even so, a START_SYNC+WAIT_SYNC still guarantees that any operation completed before the START_SYNC reaches disk. Signed-off-by: Sage Weil <sage@newdream.net> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2010-10-30 03:41:32 +08:00
if (t->transid == transid) {
cur_trans = t;
refcount_inc(&cur_trans->use_count);
ret = 0;
Btrfs: add START_SYNC, WAIT_SYNC ioctls START_SYNC will start a sync/commit, but not wait for it to complete. Any modification started after the ioctl returns is guaranteed not to be included in the commit. If a non-NULL pointer is passed, the transaction id will be returned to userspace. WAIT_SYNC will wait for any in-progress commit to complete. If a transaction id is specified, the ioctl will block and then return (success) when the specified transaction has committed. If it has already committed when we call the ioctl, it returns immediately. If the specified transaction doesn't exist, it returns EINVAL. If no transaction id is specified, WAIT_SYNC will wait for the currently committing transaction to finish it's commit to disk. If there is no currently committing transaction, it returns success. These ioctls are useful for applications which want to impose an ordering on when fs modifications reach disk, but do not want to wait for the full (slow) commit process to do so. Picky callers can take the transid returned by START_SYNC and feed it to WAIT_SYNC, and be certain to wait only as long as necessary for the transaction _they_ started to reach disk. Sloppy callers can START_SYNC and WAIT_SYNC without a transid, and provided they didn't wait too long between the calls, they will get the same result. However, if a second commit starts before they call WAIT_SYNC, they may end up waiting longer for it to commit as well. Even so, a START_SYNC+WAIT_SYNC still guarantees that any operation completed before the START_SYNC reaches disk. Signed-off-by: Sage Weil <sage@newdream.net> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2010-10-30 03:41:32 +08:00
break;
}
if (t->transid > transid) {
ret = 0;
Btrfs: add START_SYNC, WAIT_SYNC ioctls START_SYNC will start a sync/commit, but not wait for it to complete. Any modification started after the ioctl returns is guaranteed not to be included in the commit. If a non-NULL pointer is passed, the transaction id will be returned to userspace. WAIT_SYNC will wait for any in-progress commit to complete. If a transaction id is specified, the ioctl will block and then return (success) when the specified transaction has committed. If it has already committed when we call the ioctl, it returns immediately. If the specified transaction doesn't exist, it returns EINVAL. If no transaction id is specified, WAIT_SYNC will wait for the currently committing transaction to finish it's commit to disk. If there is no currently committing transaction, it returns success. These ioctls are useful for applications which want to impose an ordering on when fs modifications reach disk, but do not want to wait for the full (slow) commit process to do so. Picky callers can take the transid returned by START_SYNC and feed it to WAIT_SYNC, and be certain to wait only as long as necessary for the transaction _they_ started to reach disk. Sloppy callers can START_SYNC and WAIT_SYNC without a transid, and provided they didn't wait too long between the calls, they will get the same result. However, if a second commit starts before they call WAIT_SYNC, they may end up waiting longer for it to commit as well. Even so, a START_SYNC+WAIT_SYNC still guarantees that any operation completed before the START_SYNC reaches disk. Signed-off-by: Sage Weil <sage@newdream.net> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2010-10-30 03:41:32 +08:00
break;
}
Btrfs: add START_SYNC, WAIT_SYNC ioctls START_SYNC will start a sync/commit, but not wait for it to complete. Any modification started after the ioctl returns is guaranteed not to be included in the commit. If a non-NULL pointer is passed, the transaction id will be returned to userspace. WAIT_SYNC will wait for any in-progress commit to complete. If a transaction id is specified, the ioctl will block and then return (success) when the specified transaction has committed. If it has already committed when we call the ioctl, it returns immediately. If the specified transaction doesn't exist, it returns EINVAL. If no transaction id is specified, WAIT_SYNC will wait for the currently committing transaction to finish it's commit to disk. If there is no currently committing transaction, it returns success. These ioctls are useful for applications which want to impose an ordering on when fs modifications reach disk, but do not want to wait for the full (slow) commit process to do so. Picky callers can take the transid returned by START_SYNC and feed it to WAIT_SYNC, and be certain to wait only as long as necessary for the transaction _they_ started to reach disk. Sloppy callers can START_SYNC and WAIT_SYNC without a transid, and provided they didn't wait too long between the calls, they will get the same result. However, if a second commit starts before they call WAIT_SYNC, they may end up waiting longer for it to commit as well. Even so, a START_SYNC+WAIT_SYNC still guarantees that any operation completed before the START_SYNC reaches disk. Signed-off-by: Sage Weil <sage@newdream.net> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2010-10-30 03:41:32 +08:00
}
spin_unlock(&fs_info->trans_lock);
/*
* The specified transaction doesn't exist, or we
* raced with btrfs_commit_transaction
*/
if (!cur_trans) {
if (transid > fs_info->last_trans_committed)
ret = -EINVAL;
goto out;
}
Btrfs: add START_SYNC, WAIT_SYNC ioctls START_SYNC will start a sync/commit, but not wait for it to complete. Any modification started after the ioctl returns is guaranteed not to be included in the commit. If a non-NULL pointer is passed, the transaction id will be returned to userspace. WAIT_SYNC will wait for any in-progress commit to complete. If a transaction id is specified, the ioctl will block and then return (success) when the specified transaction has committed. If it has already committed when we call the ioctl, it returns immediately. If the specified transaction doesn't exist, it returns EINVAL. If no transaction id is specified, WAIT_SYNC will wait for the currently committing transaction to finish it's commit to disk. If there is no currently committing transaction, it returns success. These ioctls are useful for applications which want to impose an ordering on when fs modifications reach disk, but do not want to wait for the full (slow) commit process to do so. Picky callers can take the transid returned by START_SYNC and feed it to WAIT_SYNC, and be certain to wait only as long as necessary for the transaction _they_ started to reach disk. Sloppy callers can START_SYNC and WAIT_SYNC without a transid, and provided they didn't wait too long between the calls, they will get the same result. However, if a second commit starts before they call WAIT_SYNC, they may end up waiting longer for it to commit as well. Even so, a START_SYNC+WAIT_SYNC still guarantees that any operation completed before the START_SYNC reaches disk. Signed-off-by: Sage Weil <sage@newdream.net> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2010-10-30 03:41:32 +08:00
} else {
/* find newest transaction that is committing | committed */
spin_lock(&fs_info->trans_lock);
list_for_each_entry_reverse(t, &fs_info->trans_list,
Btrfs: add START_SYNC, WAIT_SYNC ioctls START_SYNC will start a sync/commit, but not wait for it to complete. Any modification started after the ioctl returns is guaranteed not to be included in the commit. If a non-NULL pointer is passed, the transaction id will be returned to userspace. WAIT_SYNC will wait for any in-progress commit to complete. If a transaction id is specified, the ioctl will block and then return (success) when the specified transaction has committed. If it has already committed when we call the ioctl, it returns immediately. If the specified transaction doesn't exist, it returns EINVAL. If no transaction id is specified, WAIT_SYNC will wait for the currently committing transaction to finish it's commit to disk. If there is no currently committing transaction, it returns success. These ioctls are useful for applications which want to impose an ordering on when fs modifications reach disk, but do not want to wait for the full (slow) commit process to do so. Picky callers can take the transid returned by START_SYNC and feed it to WAIT_SYNC, and be certain to wait only as long as necessary for the transaction _they_ started to reach disk. Sloppy callers can START_SYNC and WAIT_SYNC without a transid, and provided they didn't wait too long between the calls, they will get the same result. However, if a second commit starts before they call WAIT_SYNC, they may end up waiting longer for it to commit as well. Even so, a START_SYNC+WAIT_SYNC still guarantees that any operation completed before the START_SYNC reaches disk. Signed-off-by: Sage Weil <sage@newdream.net> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2010-10-30 03:41:32 +08:00
list) {
Btrfs: make the state of the transaction more readable We used 3 variants to track the state of the transaction, it was complex and wasted the memory space. Besides that, it was hard to understand that which types of the transaction handles should be blocked in each transaction state, so the developers often made mistakes. This patch improved the above problem. In this patch, we define 6 states for the transaction, enum btrfs_trans_state { TRANS_STATE_RUNNING = 0, TRANS_STATE_BLOCKED = 1, TRANS_STATE_COMMIT_START = 2, TRANS_STATE_COMMIT_DOING = 3, TRANS_STATE_UNBLOCKED = 4, TRANS_STATE_COMPLETED = 5, TRANS_STATE_MAX = 6, } and just use 1 variant to track those state. In order to make the blocked handle types for each state more clear, we introduce a array: unsigned int btrfs_blocked_trans_types[TRANS_STATE_MAX] = { [TRANS_STATE_RUNNING] = 0U, [TRANS_STATE_BLOCKED] = (__TRANS_USERSPACE | __TRANS_START), [TRANS_STATE_COMMIT_START] = (__TRANS_USERSPACE | __TRANS_START | __TRANS_ATTACH), [TRANS_STATE_COMMIT_DOING] = (__TRANS_USERSPACE | __TRANS_START | __TRANS_ATTACH | __TRANS_JOIN), [TRANS_STATE_UNBLOCKED] = (__TRANS_USERSPACE | __TRANS_START | __TRANS_ATTACH | __TRANS_JOIN | __TRANS_JOIN_NOLOCK), [TRANS_STATE_COMPLETED] = (__TRANS_USERSPACE | __TRANS_START | __TRANS_ATTACH | __TRANS_JOIN | __TRANS_JOIN_NOLOCK), } it is very intuitionistic. Besides that, because we remove ->in_commit in transaction structure, so the lock ->commit_lock which was used to protect it is unnecessary, remove ->commit_lock. Signed-off-by: Miao Xie <miaox@cn.fujitsu.com> Signed-off-by: Josef Bacik <jbacik@fusionio.com>
2013-05-17 11:53:43 +08:00
if (t->state >= TRANS_STATE_COMMIT_START) {
if (t->state == TRANS_STATE_COMPLETED)
break;
Btrfs: add START_SYNC, WAIT_SYNC ioctls START_SYNC will start a sync/commit, but not wait for it to complete. Any modification started after the ioctl returns is guaranteed not to be included in the commit. If a non-NULL pointer is passed, the transaction id will be returned to userspace. WAIT_SYNC will wait for any in-progress commit to complete. If a transaction id is specified, the ioctl will block and then return (success) when the specified transaction has committed. If it has already committed when we call the ioctl, it returns immediately. If the specified transaction doesn't exist, it returns EINVAL. If no transaction id is specified, WAIT_SYNC will wait for the currently committing transaction to finish it's commit to disk. If there is no currently committing transaction, it returns success. These ioctls are useful for applications which want to impose an ordering on when fs modifications reach disk, but do not want to wait for the full (slow) commit process to do so. Picky callers can take the transid returned by START_SYNC and feed it to WAIT_SYNC, and be certain to wait only as long as necessary for the transaction _they_ started to reach disk. Sloppy callers can START_SYNC and WAIT_SYNC without a transid, and provided they didn't wait too long between the calls, they will get the same result. However, if a second commit starts before they call WAIT_SYNC, they may end up waiting longer for it to commit as well. Even so, a START_SYNC+WAIT_SYNC still guarantees that any operation completed before the START_SYNC reaches disk. Signed-off-by: Sage Weil <sage@newdream.net> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2010-10-30 03:41:32 +08:00
cur_trans = t;
refcount_inc(&cur_trans->use_count);
Btrfs: add START_SYNC, WAIT_SYNC ioctls START_SYNC will start a sync/commit, but not wait for it to complete. Any modification started after the ioctl returns is guaranteed not to be included in the commit. If a non-NULL pointer is passed, the transaction id will be returned to userspace. WAIT_SYNC will wait for any in-progress commit to complete. If a transaction id is specified, the ioctl will block and then return (success) when the specified transaction has committed. If it has already committed when we call the ioctl, it returns immediately. If the specified transaction doesn't exist, it returns EINVAL. If no transaction id is specified, WAIT_SYNC will wait for the currently committing transaction to finish it's commit to disk. If there is no currently committing transaction, it returns success. These ioctls are useful for applications which want to impose an ordering on when fs modifications reach disk, but do not want to wait for the full (slow) commit process to do so. Picky callers can take the transid returned by START_SYNC and feed it to WAIT_SYNC, and be certain to wait only as long as necessary for the transaction _they_ started to reach disk. Sloppy callers can START_SYNC and WAIT_SYNC without a transid, and provided they didn't wait too long between the calls, they will get the same result. However, if a second commit starts before they call WAIT_SYNC, they may end up waiting longer for it to commit as well. Even so, a START_SYNC+WAIT_SYNC still guarantees that any operation completed before the START_SYNC reaches disk. Signed-off-by: Sage Weil <sage@newdream.net> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2010-10-30 03:41:32 +08:00
break;
}
}
spin_unlock(&fs_info->trans_lock);
Btrfs: add START_SYNC, WAIT_SYNC ioctls START_SYNC will start a sync/commit, but not wait for it to complete. Any modification started after the ioctl returns is guaranteed not to be included in the commit. If a non-NULL pointer is passed, the transaction id will be returned to userspace. WAIT_SYNC will wait for any in-progress commit to complete. If a transaction id is specified, the ioctl will block and then return (success) when the specified transaction has committed. If it has already committed when we call the ioctl, it returns immediately. If the specified transaction doesn't exist, it returns EINVAL. If no transaction id is specified, WAIT_SYNC will wait for the currently committing transaction to finish it's commit to disk. If there is no currently committing transaction, it returns success. These ioctls are useful for applications which want to impose an ordering on when fs modifications reach disk, but do not want to wait for the full (slow) commit process to do so. Picky callers can take the transid returned by START_SYNC and feed it to WAIT_SYNC, and be certain to wait only as long as necessary for the transaction _they_ started to reach disk. Sloppy callers can START_SYNC and WAIT_SYNC without a transid, and provided they didn't wait too long between the calls, they will get the same result. However, if a second commit starts before they call WAIT_SYNC, they may end up waiting longer for it to commit as well. Even so, a START_SYNC+WAIT_SYNC still guarantees that any operation completed before the START_SYNC reaches disk. Signed-off-by: Sage Weil <sage@newdream.net> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2010-10-30 03:41:32 +08:00
if (!cur_trans)
Btrfs: kill trans_mutex We use trans_mutex for lots of things, here's a basic list 1) To serialize trans_handles joining the currently running transaction 2) To make sure that no new trans handles are started while we are committing 3) To protect the dead_roots list and the transaction lists Really the serializing trans_handles joining is not too hard, and can really get bogged down in acquiring a reference to the transaction. So replace the trans_mutex with a trans_lock spinlock and use it to do the following 1) Protect fs_info->running_transaction. All trans handles have to do is check this, and then take a reference of the transaction and keep on going. 2) Protect the fs_info->trans_list. This doesn't get used too much, basically it just holds the current transactions, which will usually just be the currently committing transaction and the currently running transaction at most. 3) Protect the dead roots list. This is only ever processed by splicing the list so this is relatively simple. 4) Protect the fs_info->reloc_ctl stuff. This is very lightweight and was using the trans_mutex before, so this is a pretty straightforward change. 5) Protect fs_info->no_trans_join. Because we don't hold the trans_lock over the entirety of the commit we need to have a way to block new people from creating a new transaction while we're doing our work. So we set no_trans_join and in join_transaction we test to see if that is set, and if it is we do a wait_on_commit. 6) Make the transaction use count atomic so we don't need to take locks to modify it when we're dropping references. 7) Add a commit_lock to the transaction to make sure multiple people trying to commit the same transaction don't race and commit at the same time. 8) Make open_ioctl_trans an atomic so we don't have to take any locks for ioctl trans. I have tested this with xfstests, but obviously it is a pretty hairy change so lots of testing is greatly appreciated. Thanks, Signed-off-by: Josef Bacik <josef@redhat.com>
2011-04-12 05:25:13 +08:00
goto out; /* nothing committing|committed */
Btrfs: add START_SYNC, WAIT_SYNC ioctls START_SYNC will start a sync/commit, but not wait for it to complete. Any modification started after the ioctl returns is guaranteed not to be included in the commit. If a non-NULL pointer is passed, the transaction id will be returned to userspace. WAIT_SYNC will wait for any in-progress commit to complete. If a transaction id is specified, the ioctl will block and then return (success) when the specified transaction has committed. If it has already committed when we call the ioctl, it returns immediately. If the specified transaction doesn't exist, it returns EINVAL. If no transaction id is specified, WAIT_SYNC will wait for the currently committing transaction to finish it's commit to disk. If there is no currently committing transaction, it returns success. These ioctls are useful for applications which want to impose an ordering on when fs modifications reach disk, but do not want to wait for the full (slow) commit process to do so. Picky callers can take the transid returned by START_SYNC and feed it to WAIT_SYNC, and be certain to wait only as long as necessary for the transaction _they_ started to reach disk. Sloppy callers can START_SYNC and WAIT_SYNC without a transid, and provided they didn't wait too long between the calls, they will get the same result. However, if a second commit starts before they call WAIT_SYNC, they may end up waiting longer for it to commit as well. Even so, a START_SYNC+WAIT_SYNC still guarantees that any operation completed before the START_SYNC reaches disk. Signed-off-by: Sage Weil <sage@newdream.net> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2010-10-30 03:41:32 +08:00
}
btrfs: make concurrent fsyncs wait less when waiting for a transaction commit Often an fsync needs to fallback to a transaction commit for several reasons (to ensure consistency after a power failure, a new block group was allocated or a temporary error such as ENOMEM or ENOSPC happened). In that case the log is marked as needing a full commit and any concurrent tasks attempting to log inodes or commit the log will also fallback to the transaction commit. When this happens they all wait for the task that first started the transaction commit to finish the transaction commit - however they wait until the full transaction commit happens, which is not needed, as they only need to wait for the superblocks to be persisted and not for unpinning all the extents pinned during the transaction's lifetime, which even for short lived transactions can be a few thousand and take some significant amount of time to complete - for dbench workloads I have observed up to 4~5 milliseconds of time spent unpinning extents in the worst cases, and the number of pinned extents was between 2 to 3 thousand. So allow fsync tasks to skip waiting for the unpinning of extents when they call btrfs_commit_transaction() and they were not the task that started the transaction commit (that one has to do it, the alternative would be to offload the transaction commit to another task so that it could avoid waiting for the extent unpinning or offload the extent unpinning to another task). This patch is part of a patchset comprised of the following patches: btrfs: remove unnecessary directory inode item update when deleting dir entry btrfs: stop setting nbytes when filling inode item for logging btrfs: avoid logging new ancestor inodes when logging new inode btrfs: skip logging directories already logged when logging all parents btrfs: skip logging inodes already logged when logging new entries btrfs: remove unnecessary check_parent_dirs_for_sync() btrfs: make concurrent fsyncs wait less when waiting for a transaction commit After applying the entire patchset, dbench shows improvements in respect to throughput and latency. The script used to measure it is the following: $ cat dbench-test.sh #!/bin/bash DEV=/dev/sdk MNT=/mnt/sdk MOUNT_OPTIONS="-o ssd" MKFS_OPTIONS="-m single -d single" echo "performance" | tee /sys/devices/system/cpu/cpu*/cpufreq/scaling_governor umount $DEV &> /dev/null mkfs.btrfs -f $MKFS_OPTIONS $DEV mount $MOUNT_OPTIONS $DEV $MNT dbench -D $MNT -t 300 64 umount $MNT The test was run on a physical machine with 12 cores (Intel corei7), 64G of ram, using a NVMe device and a non-debug kernel configuration (Debian's default configuration). Before applying patchset, 32 clients: Operation Count AvgLat MaxLat ---------------------------------------- NTCreateX 9627107 0.153 61.938 Close 7072076 0.001 3.175 Rename 407633 1.222 44.439 Unlink 1943895 0.658 44.440 Deltree 256 17.339 110.891 Mkdir 128 0.003 0.009 Qpathinfo 8725406 0.064 17.850 Qfileinfo 1529516 0.001 2.188 Qfsinfo 1599884 0.002 1.457 Sfileinfo 784200 0.005 3.562 Find 3373513 0.411 30.312 WriteX 4802132 0.053 29.054 ReadX 15089959 0.002 5.801 LockX 31344 0.002 0.425 UnlockX 31344 0.001 0.173 Flush 674724 5.952 341.830 Throughput 1008.02 MB/sec 32 clients 32 procs max_latency=341.833 ms After applying patchset, 32 clients: After patchset, with 32 clients: Operation Count AvgLat MaxLat ---------------------------------------- NTCreateX 9931568 0.111 25.597 Close 7295730 0.001 2.171 Rename 420549 0.982 49.714 Unlink 2005366 0.497 39.015 Deltree 256 11.149 89.242 Mkdir 128 0.002 0.014 Qpathinfo 9001863 0.049 20.761 Qfileinfo 1577730 0.001 2.546 Qfsinfo 1650508 0.002 3.531 Sfileinfo 809031 0.005 5.846 Find 3480259 0.309 23.977 WriteX 4952505 0.043 41.283 ReadX 15568127 0.002 5.476 LockX 32338 0.002 0.978 UnlockX 32338 0.001 2.032 Flush 696017 7.485 228.835 Throughput 1049.91 MB/sec 32 clients 32 procs max_latency=228.847 ms --> +4.1% throughput, -39.6% max latency Before applying patchset, 64 clients: Operation Count AvgLat MaxLat ---------------------------------------- NTCreateX 8956748 0.342 108.312 Close 6579660 0.001 3.823 Rename 379209 2.396 81.897 Unlink 1808625 1.108 131.148 Deltree 256 25.632 172.176 Mkdir 128 0.003 0.018 Qpathinfo 8117615 0.131 55.916 Qfileinfo 1423495 0.001 2.635 Qfsinfo 1488496 0.002 5.412 Sfileinfo 729472 0.007 8.643 Find 3138598 0.855 78.321 WriteX 4470783 0.102 79.442 ReadX 14038139 0.002 7.578 LockX 29158 0.002 0.844 UnlockX 29158 0.001 0.567 Flush 627746 14.168 506.151 Throughput 924.738 MB/sec 64 clients 64 procs max_latency=506.154 ms After applying patchset, 64 clients: Operation Count AvgLat MaxLat ---------------------------------------- NTCreateX 9069003 0.303 43.193 Close 6662328 0.001 3.888 Rename 383976 2.194 46.418 Unlink 1831080 1.022 43.873 Deltree 256 24.037 155.763 Mkdir 128 0.002 0.005 Qpathinfo 8219173 0.137 30.233 Qfileinfo 1441203 0.001 3.204 Qfsinfo 1507092 0.002 4.055 Sfileinfo 738775 0.006 5.431 Find 3177874 0.936 38.170 WriteX 4526152 0.084 39.518 ReadX 14213562 0.002 24.760 LockX 29522 0.002 1.221 UnlockX 29522 0.001 0.694 Flush 635652 14.358 422.039 Throughput 990.13 MB/sec 64 clients 64 procs max_latency=422.043 ms --> +6.8% throughput, -18.1% max latency Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2021-01-27 18:35:00 +08:00
wait_for_commit(cur_trans, TRANS_STATE_COMPLETED);
btrfs_put_transaction(cur_trans);
Btrfs: kill trans_mutex We use trans_mutex for lots of things, here's a basic list 1) To serialize trans_handles joining the currently running transaction 2) To make sure that no new trans handles are started while we are committing 3) To protect the dead_roots list and the transaction lists Really the serializing trans_handles joining is not too hard, and can really get bogged down in acquiring a reference to the transaction. So replace the trans_mutex with a trans_lock spinlock and use it to do the following 1) Protect fs_info->running_transaction. All trans handles have to do is check this, and then take a reference of the transaction and keep on going. 2) Protect the fs_info->trans_list. This doesn't get used too much, basically it just holds the current transactions, which will usually just be the currently committing transaction and the currently running transaction at most. 3) Protect the dead roots list. This is only ever processed by splicing the list so this is relatively simple. 4) Protect the fs_info->reloc_ctl stuff. This is very lightweight and was using the trans_mutex before, so this is a pretty straightforward change. 5) Protect fs_info->no_trans_join. Because we don't hold the trans_lock over the entirety of the commit we need to have a way to block new people from creating a new transaction while we're doing our work. So we set no_trans_join and in join_transaction we test to see if that is set, and if it is we do a wait_on_commit. 6) Make the transaction use count atomic so we don't need to take locks to modify it when we're dropping references. 7) Add a commit_lock to the transaction to make sure multiple people trying to commit the same transaction don't race and commit at the same time. 8) Make open_ioctl_trans an atomic so we don't have to take any locks for ioctl trans. I have tested this with xfstests, but obviously it is a pretty hairy change so lots of testing is greatly appreciated. Thanks, Signed-off-by: Josef Bacik <josef@redhat.com>
2011-04-12 05:25:13 +08:00
out:
Btrfs: add START_SYNC, WAIT_SYNC ioctls START_SYNC will start a sync/commit, but not wait for it to complete. Any modification started after the ioctl returns is guaranteed not to be included in the commit. If a non-NULL pointer is passed, the transaction id will be returned to userspace. WAIT_SYNC will wait for any in-progress commit to complete. If a transaction id is specified, the ioctl will block and then return (success) when the specified transaction has committed. If it has already committed when we call the ioctl, it returns immediately. If the specified transaction doesn't exist, it returns EINVAL. If no transaction id is specified, WAIT_SYNC will wait for the currently committing transaction to finish it's commit to disk. If there is no currently committing transaction, it returns success. These ioctls are useful for applications which want to impose an ordering on when fs modifications reach disk, but do not want to wait for the full (slow) commit process to do so. Picky callers can take the transid returned by START_SYNC and feed it to WAIT_SYNC, and be certain to wait only as long as necessary for the transaction _they_ started to reach disk. Sloppy callers can START_SYNC and WAIT_SYNC without a transid, and provided they didn't wait too long between the calls, they will get the same result. However, if a second commit starts before they call WAIT_SYNC, they may end up waiting longer for it to commit as well. Even so, a START_SYNC+WAIT_SYNC still guarantees that any operation completed before the START_SYNC reaches disk. Signed-off-by: Sage Weil <sage@newdream.net> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2010-10-30 03:41:32 +08:00
return ret;
}
void btrfs_throttle(struct btrfs_fs_info *fs_info)
{
wait_current_trans(fs_info);
}
static bool should_end_transaction(struct btrfs_trans_handle *trans)
{
struct btrfs_fs_info *fs_info = trans->fs_info;
if (btrfs_check_space_for_delayed_refs(fs_info))
return true;
return !!btrfs_block_rsv_check(&fs_info->global_block_rsv, 5);
}
bool btrfs_should_end_transaction(struct btrfs_trans_handle *trans)
{
struct btrfs_transaction *cur_trans = trans->transaction;
if (cur_trans->state >= TRANS_STATE_COMMIT_START ||
btrfs: only let one thread pre-flush delayed refs in commit I've been running a stress test that runs 20 workers in their own subvolume, which are running an fsstress instance with 4 threads per worker, which is 80 total fsstress threads. In addition to this I'm running balance in the background as well as creating and deleting snapshots. This test takes around 12 hours to run normally, going slower and slower as the test goes on. The reason for this is because fsstress is running fsync sometimes, and because we're messing with block groups we often fall through to btrfs_commit_transaction, so will often have 20-30 threads all calling btrfs_commit_transaction at the same time. These all get stuck contending on the extent tree while they try to run delayed refs during the initial part of the commit. This is suboptimal, really because the extent tree is a single point of failure we only want one thread acting on that tree at once to reduce lock contention. Fix this by making the flushing mechanism a bit operation, to make it easy to use test_and_set_bit() in order to make sure only one task does this initial flush. Once we're into the transaction commit we only have one thread doing delayed ref running, it's just this initial pre-flush that is problematic. With this patch my stress test takes around 90 minutes to run, instead of 12 hours. The memory barrier is not necessary for the flushing bit as it's ordered, unlike plain int. The transaction state accessed in btrfs_should_end_transaction could be affected by that too as it's not always used under transaction lock. Upon Nikolay's analysis in [1] it's not necessary: In should_end_transaction it's read without holding any locks. (U) It's modified in btrfs_cleanup_transaction without holding the fs_info->trans_lock (U), but the STATE_ERROR flag is going to be set. set in cleanup_transaction under fs_info->trans_lock (L) set in btrfs_commit_trans to COMMIT_START under fs_info->trans_lock.(L) set in btrfs_commit_trans to COMMIT_DOING under fs_info->trans_lock.(L) set in btrfs_commit_trans to COMMIT_UNBLOCK under fs_info->trans_lock.(L) set in btrfs_commit_trans to COMMIT_COMPLETED without locks but at this point the transaction is finished and fs_info->running_trans is NULL (U but irrelevant). So by the looks of it we can have a concurrent READ race with a WRITE, due to reads not taking a lock. In this case what we want to ensure is we either see new or old state. I consulted with Will Deacon and he said that in such a case we'd want to annotate the accesses to ->state with (READ|WRITE)_ONCE so as to avoid a theoretical tear, in this case I don't think this could happen but I imagine at some point KCSAN would flag such an access as racy (which it is). [1] https://lore.kernel.org/linux-btrfs/e1fd5cc1-0f28-f670-69f4-e9958b4964e6@suse.com Reviewed-by: Nikolay Borisov <nborisov@suse.com> Signed-off-by: Josef Bacik <josef@toxicpanda.com> [ add comments regarding memory barrier ] Signed-off-by: David Sterba <dsterba@suse.com>
2020-12-19 03:24:20 +08:00
test_bit(BTRFS_DELAYED_REFS_FLUSHING, &cur_trans->delayed_refs.flags))
return true;
return should_end_transaction(trans);
}
static void btrfs_trans_release_metadata(struct btrfs_trans_handle *trans)
{
struct btrfs_fs_info *fs_info = trans->fs_info;
if (!trans->block_rsv) {
ASSERT(!trans->bytes_reserved);
return;
}
if (!trans->bytes_reserved)
return;
ASSERT(trans->block_rsv == &fs_info->trans_block_rsv);
trace_btrfs_space_reservation(fs_info, "transaction",
trans->transid, trans->bytes_reserved, 0);
btrfs_block_rsv_release(fs_info, trans->block_rsv,
trans->bytes_reserved, NULL);
trans->bytes_reserved = 0;
}
static int __btrfs_end_transaction(struct btrfs_trans_handle *trans,
int throttle)
{
struct btrfs_fs_info *info = trans->fs_info;
struct btrfs_transaction *cur_trans = trans->transaction;
int err = 0;
if (refcount_read(&trans->use_count) > 1) {
refcount_dec(&trans->use_count);
trans->block_rsv = trans->orig_rsv;
return 0;
}
btrfs_trans_release_metadata(trans);
trans->block_rsv = NULL;
btrfs_create_pending_block_groups(trans);
Btrfs: fix -ENOSPC when finishing block group creation While creating a block group, we often end up getting ENOSPC while updating the chunk tree, which leads to a transaction abortion that produces a trace like the following: [30670.116368] WARNING: CPU: 4 PID: 20735 at fs/btrfs/super.c:260 __btrfs_abort_transaction+0x52/0x106 [btrfs]() [30670.117777] BTRFS: Transaction aborted (error -28) (...) [30670.163567] Call Trace: [30670.163906] [<ffffffff8142fa46>] dump_stack+0x4f/0x7b [30670.164522] [<ffffffff8108b6a2>] ? console_unlock+0x361/0x3ad [30670.165171] [<ffffffff81045ea5>] warn_slowpath_common+0xa1/0xbb [30670.166323] [<ffffffffa035daa7>] ? __btrfs_abort_transaction+0x52/0x106 [btrfs] [30670.167213] [<ffffffff81045f05>] warn_slowpath_fmt+0x46/0x48 [30670.167862] [<ffffffffa035daa7>] __btrfs_abort_transaction+0x52/0x106 [btrfs] [30670.169116] [<ffffffffa03743d7>] btrfs_create_pending_block_groups+0x101/0x130 [btrfs] [30670.170593] [<ffffffffa038426a>] __btrfs_end_transaction+0x84/0x366 [btrfs] [30670.171960] [<ffffffffa038455c>] btrfs_end_transaction+0x10/0x12 [btrfs] [30670.174649] [<ffffffffa036eb6b>] btrfs_check_data_free_space+0x11f/0x27c [btrfs] [30670.176092] [<ffffffffa039450d>] btrfs_fallocate+0x7c8/0xb96 [btrfs] [30670.177218] [<ffffffff812459f2>] ? __this_cpu_preempt_check+0x13/0x15 [30670.178622] [<ffffffff81152447>] vfs_fallocate+0x14c/0x1de [30670.179642] [<ffffffff8116b915>] ? __fget_light+0x2d/0x4f [30670.180692] [<ffffffff81152863>] SyS_fallocate+0x47/0x62 [30670.186737] [<ffffffff81435b32>] system_call_fastpath+0x12/0x17 [30670.187792] ---[ end trace 0373e6b491c4a8cc ]--- This is because we don't do proper space reservation for the chunk block reserve when we have multiple tasks allocating chunks in parallel. So block group creation has 2 phases, and the first phase essentially checks if there is enough space in the system space_info, allocating a new system chunk if there isn't, while the second phase updates the device, extent and chunk trees. However, because the updates to the chunk tree happen in the second phase, if we have N tasks, each with its own transaction handle, allocating new chunks in parallel and if there is only enough space in the system space_info to allocate M chunks, where M < N, none of the tasks ends up allocating a new system chunk in the first phase and N - M tasks will get -ENOSPC when attempting to update the chunk tree in phase 2 if they need to COW any nodes/leafs from the chunk tree. Fix this by doing proper reservation in the chunk block reserve. The issue could be reproduced by running fstests generic/038 in a loop, which eventually triggered the problem. Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: Chris Mason <clm@fb.com>
2015-05-20 21:01:54 +08:00
btrfs_trans_release_chunk_metadata(trans);
if (trans->type & __TRANS_FREEZABLE)
sb_end_intwrite(info->sb);
Btrfs: move the sb_end_intwrite until after the throttle logic Sage reported the following lockdep backtrace ===================================== [ BUG: bad unlock balance detected! ] 3.6.0-rc2-ceph-00171-gc7ed62d #1 Not tainted ------------------------------------- btrfs-cleaner/7607 is trying to release lock (sb_internal) at: [<ffffffffa00422ae>] btrfs_commit_transaction+0xa6e/0xb20 [btrfs] but there are no more locks to release! other info that might help us debug this: 1 lock held by btrfs-cleaner/7607: #0: (&fs_info->cleaner_mutex){+.+...}, at: [<ffffffffa003b405>] cleaner_kthread+0x95/0x120 [btrfs] stack backtrace: Pid: 7607, comm: btrfs-cleaner Not tainted 3.6.0-rc2-ceph-00171-gc7ed62d #1 Call Trace: [<ffffffffa00422ae>] ? btrfs_commit_transaction+0xa6e/0xb20 [btrfs] [<ffffffff810afa9e>] print_unlock_inbalance_bug+0xfe/0x110 [<ffffffff810b289e>] lock_release_non_nested+0x1ee/0x310 [<ffffffff81172f9b>] ? kmem_cache_free+0x7b/0x160 [<ffffffffa004106c>] ? put_transaction+0x8c/0x130 [btrfs] [<ffffffffa00422ae>] ? btrfs_commit_transaction+0xa6e/0xb20 [btrfs] [<ffffffff810b2a95>] lock_release+0xd5/0x220 [<ffffffff81173071>] ? kmem_cache_free+0x151/0x160 [<ffffffff8117d9ed>] __sb_end_write+0x7d/0x90 [<ffffffffa00422ae>] btrfs_commit_transaction+0xa6e/0xb20 [btrfs] [<ffffffff81079850>] ? __init_waitqueue_head+0x60/0x60 [<ffffffff81634c6b>] ? _raw_spin_unlock+0x2b/0x40 [<ffffffffa0042758>] __btrfs_end_transaction+0x368/0x3c0 [btrfs] [<ffffffffa0042808>] btrfs_end_transaction_throttle+0x18/0x20 [btrfs] [<ffffffffa00318f0>] btrfs_drop_snapshot+0x410/0x600 [btrfs] [<ffffffff8132babd>] ? do_raw_spin_unlock+0x5d/0xb0 [<ffffffffa00430ef>] btrfs_clean_old_snapshots+0xaf/0x150 [btrfs] [<ffffffffa003b405>] ? cleaner_kthread+0x95/0x120 [btrfs] [<ffffffffa003b419>] cleaner_kthread+0xa9/0x120 [btrfs] [<ffffffffa003b370>] ? btrfs_destroy_delayed_refs.isra.102+0x220/0x220 [btrfs] [<ffffffff810791ee>] kthread+0xae/0xc0 [<ffffffff810b379d>] ? trace_hardirqs_on+0xd/0x10 [<ffffffff8163e744>] kernel_thread_helper+0x4/0x10 [<ffffffff81635430>] ? retint_restore_args+0x13/0x13 [<ffffffff81079140>] ? flush_kthread_work+0x1a0/0x1a0 [<ffffffff8163e740>] ? gs_change+0x13/0x13 This is because the throttle stuff can commit the transaction, which expects to be the one stopping the intwrite stuff, but we've already done it in the __btrfs_end_transaction. Moving the sb_end_intewrite after this logic makes the lockdep go away. Thanks, Tested-by: Sage Weil <sage@inktank.com> Signed-off-by: Josef Bacik <jbacik@fusionio.com>
2012-09-05 22:08:30 +08:00
WARN_ON(cur_trans != info->running_transaction);
WARN_ON(atomic_read(&cur_trans->num_writers) < 1);
atomic_dec(&cur_trans->num_writers);
extwriter_counter_dec(cur_trans, trans->type);
cond_wake_up(&cur_trans->writer_wait);
btrfs_put_transaction(cur_trans);
Btrfs: proper -ENOSPC handling At the start of a transaction we do a btrfs_reserve_metadata_space() and specify how many items we plan on modifying. Then once we've done our modifications and such, just call btrfs_unreserve_metadata_space() for the same number of items we reserved. For keeping track of metadata needed for data I've had to add an extent_io op for when we merge extents. This lets us track space properly when we are doing sequential writes, so we don't end up reserving way more metadata space than what we need. The only place where the metadata space accounting is not done is in the relocation code. This is because Yan is going to be reworking that code in the near future, so running btrfs-vol -b could still possibly result in a ENOSPC related panic. This patch also turns off the metadata_ratio stuff in order to allow users to more efficiently use their disk space. This patch makes it so we track how much metadata we need for an inode's delayed allocation extents by tracking how many extents are currently waiting for allocation. It introduces two new callbacks for the extent_io tree's, merge_extent_hook and split_extent_hook. These help us keep track of when we merge delalloc extents together and split them up. Reservations are handled prior to any actually dirty'ing occurs, and then we unreserve after we dirty. btrfs_unreserve_metadata_for_delalloc() will make the appropriate unreservations as needed based on the number of reservations we currently have and the number of extents we currently have. Doing the reservation outside of doing any of the actual dirty'ing lets us do things like filemap_flush() the inode to try and force delalloc to happen, or as a last resort actually start allocation on all delalloc inodes in the fs. This has survived dbench, fs_mark and an fsx torture test. Signed-off-by: Josef Bacik <jbacik@redhat.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-09-12 04:12:44 +08:00
if (current->journal_info == trans)
current->journal_info = NULL;
if (throttle)
btrfs_run_delayed_iputs(info);
if (TRANS_ABORTED(trans) || BTRFS_FS_ERROR(info)) {
wake_up_process(info->transaction_kthread);
btrfs: return EROFS for BTRFS_FS_STATE_ERROR cases Eric reported seeing this message while running generic/475 BTRFS: error (device dm-3) in btrfs_sync_log:3084: errno=-117 Filesystem corrupted Full stack trace: BTRFS: error (device dm-0) in btrfs_commit_transaction:2323: errno=-5 IO failure (Error while writing out transaction) BTRFS info (device dm-0): forced readonly BTRFS warning (device dm-0): Skipping commit of aborted transaction. ------------[ cut here ]------------ BTRFS: error (device dm-0) in cleanup_transaction:1894: errno=-5 IO failure BTRFS: Transaction aborted (error -117) BTRFS warning (device dm-0): direct IO failed ino 3555 rw 0,0 sector 0x1c6480 len 4096 err no 10 BTRFS warning (device dm-0): direct IO failed ino 3555 rw 0,0 sector 0x1c6488 len 4096 err no 10 BTRFS warning (device dm-0): direct IO failed ino 3555 rw 0,0 sector 0x1c6490 len 4096 err no 10 BTRFS warning (device dm-0): direct IO failed ino 3555 rw 0,0 sector 0x1c6498 len 4096 err no 10 BTRFS warning (device dm-0): direct IO failed ino 3555 rw 0,0 sector 0x1c64a0 len 4096 err no 10 BTRFS warning (device dm-0): direct IO failed ino 3555 rw 0,0 sector 0x1c64a8 len 4096 err no 10 BTRFS warning (device dm-0): direct IO failed ino 3555 rw 0,0 sector 0x1c64b0 len 4096 err no 10 BTRFS warning (device dm-0): direct IO failed ino 3555 rw 0,0 sector 0x1c64b8 len 4096 err no 10 BTRFS warning (device dm-0): direct IO failed ino 3555 rw 0,0 sector 0x1c64c0 len 4096 err no 10 BTRFS warning (device dm-0): direct IO failed ino 3572 rw 0,0 sector 0x1b85e8 len 4096 err no 10 BTRFS warning (device dm-0): direct IO failed ino 3572 rw 0,0 sector 0x1b85f0 len 4096 err no 10 WARNING: CPU: 3 PID: 23985 at fs/btrfs/tree-log.c:3084 btrfs_sync_log+0xbc8/0xd60 [btrfs] BTRFS warning (device dm-0): direct IO failed ino 3548 rw 0,0 sector 0x1d4288 len 4096 err no 10 BTRFS warning (device dm-0): direct IO failed ino 3548 rw 0,0 sector 0x1d4290 len 4096 err no 10 BTRFS warning (device dm-0): direct IO failed ino 3548 rw 0,0 sector 0x1d4298 len 4096 err no 10 BTRFS warning (device dm-0): direct IO failed ino 3548 rw 0,0 sector 0x1d42a0 len 4096 err no 10 BTRFS warning (device dm-0): direct IO failed ino 3548 rw 0,0 sector 0x1d42a8 len 4096 err no 10 BTRFS warning (device dm-0): direct IO failed ino 3548 rw 0,0 sector 0x1d42b0 len 4096 err no 10 BTRFS warning (device dm-0): direct IO failed ino 3548 rw 0,0 sector 0x1d42b8 len 4096 err no 10 BTRFS warning (device dm-0): direct IO failed ino 3548 rw 0,0 sector 0x1d42c0 len 4096 err no 10 BTRFS warning (device dm-0): direct IO failed ino 3548 rw 0,0 sector 0x1d42c8 len 4096 err no 10 BTRFS warning (device dm-0): direct IO failed ino 3548 rw 0,0 sector 0x1d42d0 len 4096 err no 10 CPU: 3 PID: 23985 Comm: fsstress Tainted: G W L 5.8.0-rc4-default+ #1181 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.0-59-gc9ba527-rebuilt.opensuse.org 04/01/2014 RIP: 0010:btrfs_sync_log+0xbc8/0xd60 [btrfs] RSP: 0018:ffff909a44d17bd0 EFLAGS: 00010286 RAX: 0000000000000000 RBX: 0000000000000001 RCX: 0000000000000001 RDX: ffff8f3be41cb940 RSI: ffffffffb0108d2b RDI: ffffffffb0108ff7 RBP: ffff909a44d17e70 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000037988 R12: ffff8f3bd20e4000 R13: ffff8f3bd20e4428 R14: 00000000ffffff8b R15: ffff909a44d17c70 FS: 00007f6a6ed3fb80(0000) GS:ffff8f3c3dc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f6a6ed3e000 CR3: 00000000525c0003 CR4: 0000000000160ee0 Call Trace: ? finish_wait+0x90/0x90 ? __mutex_unlock_slowpath+0x45/0x2a0 ? lock_acquire+0xa3/0x440 ? lockref_put_or_lock+0x9/0x30 ? dput+0x20/0x4a0 ? dput+0x20/0x4a0 ? do_raw_spin_unlock+0x4b/0xc0 ? _raw_spin_unlock+0x1f/0x30 btrfs_sync_file+0x335/0x490 [btrfs] do_fsync+0x38/0x70 __x64_sys_fsync+0x10/0x20 do_syscall_64+0x50/0xe0 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x7f6a6ef1b6e3 Code: Bad RIP value. RSP: 002b:00007ffd01e20038 EFLAGS: 00000246 ORIG_RAX: 000000000000004a RAX: ffffffffffffffda RBX: 000000000007a120 RCX: 00007f6a6ef1b6e3 RDX: 00007ffd01e1ffa0 RSI: 00007ffd01e1ffa0 RDI: 0000000000000003 RBP: 0000000000000003 R08: 0000000000000001 R09: 00007ffd01e2004c R10: 0000000000000000 R11: 0000000000000246 R12: 000000000000009f R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 irq event stamp: 0 hardirqs last enabled at (0): [<0000000000000000>] 0x0 hardirqs last disabled at (0): [<ffffffffb007fe0b>] copy_process+0x67b/0x1b00 softirqs last enabled at (0): [<ffffffffb007fe0b>] copy_process+0x67b/0x1b00 softirqs last disabled at (0): [<0000000000000000>] 0x0 ---[ end trace af146e0e38433456 ]--- BTRFS: error (device dm-0) in btrfs_sync_log:3084: errno=-117 Filesystem corrupted This ret came from btrfs_write_marked_extents(). If we get an aborted transaction via EIO before, we'll see it in btree_write_cache_pages() and return EUCLEAN, which gets printed as "Filesystem corrupted". Except we shouldn't be returning EUCLEAN here, we need to be returning EROFS because EUCLEAN is reserved for actual corruption, not IO errors. We are inconsistent about our handling of BTRFS_FS_STATE_ERROR elsewhere, but we want to use EROFS for this particular case. The original transaction abort has the real error code for why we ended up with an aborted transaction, all subsequent actions just need to return EROFS because they may not have a trans handle and have no idea about the original cause of the abort. After patch "btrfs: don't WARN if we abort a transaction with EROFS" the stacktrace will not be dumped either. Reported-by: Eric Sandeen <esandeen@redhat.com> CC: stable@vger.kernel.org # 5.4+ Signed-off-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: David Sterba <dsterba@suse.com> [ add full test stacktrace ] Signed-off-by: David Sterba <dsterba@suse.com>
2020-07-21 22:38:37 +08:00
if (TRANS_ABORTED(trans))
err = trans->aborted;
else
err = -EROFS;
}
kmem_cache_free(btrfs_trans_handle_cachep, trans);
return err;
}
int btrfs_end_transaction(struct btrfs_trans_handle *trans)
{
return __btrfs_end_transaction(trans, 0);
}
int btrfs_end_transaction_throttle(struct btrfs_trans_handle *trans)
{
return __btrfs_end_transaction(trans, 1);
btrfs: implement delayed inode items operation Changelog V5 -> V6: - Fix oom when the memory load is high, by storing the delayed nodes into the root's radix tree, and letting btrfs inodes go. Changelog V4 -> V5: - Fix the race on adding the delayed node to the inode, which is spotted by Chris Mason. - Merge Chris Mason's incremental patch into this patch. - Fix deadlock between readdir() and memory fault, which is reported by Itaru Kitayama. Changelog V3 -> V4: - Fix nested lock, which is reported by Itaru Kitayama, by updating space cache inode in time. Changelog V2 -> V3: - Fix the race between the delayed worker and the task which does delayed items balance, which is reported by Tsutomu Itoh. - Modify the patch address David Sterba's comment. - Fix the bug of the cpu recursion spinlock, reported by Chris Mason Changelog V1 -> V2: - break up the global rb-tree, use a list to manage the delayed nodes, which is created for every directory and file, and used to manage the delayed directory name index items and the delayed inode item. - introduce a worker to deal with the delayed nodes. Compare with Ext3/4, the performance of file creation and deletion on btrfs is very poor. the reason is that btrfs must do a lot of b+ tree insertions, such as inode item, directory name item, directory name index and so on. If we can do some delayed b+ tree insertion or deletion, we can improve the performance, so we made this patch which implemented delayed directory name index insertion/deletion and delayed inode update. Implementation: - introduce a delayed root object into the filesystem, that use two lists to manage the delayed nodes which are created for every file/directory. One is used to manage all the delayed nodes that have delayed items. And the other is used to manage the delayed nodes which is waiting to be dealt with by the work thread. - Every delayed node has two rb-tree, one is used to manage the directory name index which is going to be inserted into b+ tree, and the other is used to manage the directory name index which is going to be deleted from b+ tree. - introduce a worker to deal with the delayed operation. This worker is used to deal with the works of the delayed directory name index items insertion and deletion and the delayed inode update. When the delayed items is beyond the lower limit, we create works for some delayed nodes and insert them into the work queue of the worker, and then go back. When the delayed items is beyond the upper bound, we create works for all the delayed nodes that haven't been dealt with, and insert them into the work queue of the worker, and then wait for that the untreated items is below some threshold value. - When we want to insert a directory name index into b+ tree, we just add the information into the delayed inserting rb-tree. And then we check the number of the delayed items and do delayed items balance. (The balance policy is above.) - When we want to delete a directory name index from the b+ tree, we search it in the inserting rb-tree at first. If we look it up, just drop it. If not, add the key of it into the delayed deleting rb-tree. Similar to the delayed inserting rb-tree, we also check the number of the delayed items and do delayed items balance. (The same to inserting manipulation) - When we want to update the metadata of some inode, we cached the data of the inode into the delayed node. the worker will flush it into the b+ tree after dealing with the delayed insertion and deletion. - We will move the delayed node to the tail of the list after we access the delayed node, By this way, we can cache more delayed items and merge more inode updates. - If we want to commit transaction, we will deal with all the delayed node. - the delayed node will be freed when we free the btrfs inode. - Before we log the inode items, we commit all the directory name index items and the delayed inode update. I did a quick test by the benchmark tool[1] and found we can improve the performance of file creation by ~15%, and file deletion by ~20%. Before applying this patch: Create files: Total files: 50000 Total time: 1.096108 Average time: 0.000022 Delete files: Total files: 50000 Total time: 1.510403 Average time: 0.000030 After applying this patch: Create files: Total files: 50000 Total time: 0.932899 Average time: 0.000019 Delete files: Total files: 50000 Total time: 1.215732 Average time: 0.000024 [1] http://marc.info/?l=linux-btrfs&m=128212635122920&q=p3 Many thanks for Kitayama-san's help! Signed-off-by: Miao Xie <miaox@cn.fujitsu.com> Reviewed-by: David Sterba <dave@jikos.cz> Tested-by: Tsutomu Itoh <t-itoh@jp.fujitsu.com> Tested-by: Itaru Kitayama <kitayama@cl.bb4u.ne.jp> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2011-04-22 18:12:22 +08:00
}
/*
* when btree blocks are allocated, they have some corresponding bits set for
* them in one of two extent_io trees. This is used to make sure all of
* those extents are sent to disk but does not wait on them
*/
int btrfs_write_marked_extents(struct btrfs_fs_info *fs_info,
struct extent_io_tree *dirty_pages, int mark)
{
int err = 0;
int werr = 0;
struct address_space *mapping = fs_info->btree_inode->i_mapping;
struct extent_state *cached_state = NULL;
u64 start = 0;
u64 end;
atomic_inc(&BTRFS_I(fs_info->btree_inode)->sync_writers);
while (!find_first_extent_bit(dirty_pages, start, &start, &end,
mark, &cached_state)) {
Btrfs: deal with convert_extent_bit errors to avoid fs corruption When committing a transaction or a log, we look for btree extents that need to be durably persisted by searching for ranges in a io tree that have some bits set (EXTENT_DIRTY or EXTENT_NEW). We then attempt to clear those bits and set the EXTENT_NEED_WAIT bit, with calls to the function convert_extent_bit, and then start writeback for the extents. That function however can return an error (at the moment only -ENOMEM is possible, specially when it does GFP_ATOMIC allocation requests through alloc_extent_state_atomic) - that means the ranges didn't got the EXTENT_NEED_WAIT bit set (or at least not for the whole range), which in turn means a call to btrfs_wait_marked_extents() won't find those ranges for which we started writeback, causing a transaction commit or a log commit to persist a new superblock without waiting for the writeback of extents in that range to finish first. Therefore if a crash happens after persisting the new superblock and before writeback finishes, we have a superblock pointing to roots that weren't fully persisted or roots that point to nodes or leafs that weren't fully persisted, causing all sorts of unexpected/bad behaviour as we endup reading garbage from disk or the content of some node/leaf from a past generation that got cowed or deleted and is no longer valid (for this later case we end up getting error messages like "parent transid verify failed on X wanted Y found Z" when reading btree nodes/leafs from disk). Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: Chris Mason <clm@fb.com>
2014-10-13 19:28:37 +08:00
bool wait_writeback = false;
err = convert_extent_bit(dirty_pages, start, end,
EXTENT_NEED_WAIT,
mark, &cached_state);
Btrfs: deal with convert_extent_bit errors to avoid fs corruption When committing a transaction or a log, we look for btree extents that need to be durably persisted by searching for ranges in a io tree that have some bits set (EXTENT_DIRTY or EXTENT_NEW). We then attempt to clear those bits and set the EXTENT_NEED_WAIT bit, with calls to the function convert_extent_bit, and then start writeback for the extents. That function however can return an error (at the moment only -ENOMEM is possible, specially when it does GFP_ATOMIC allocation requests through alloc_extent_state_atomic) - that means the ranges didn't got the EXTENT_NEED_WAIT bit set (or at least not for the whole range), which in turn means a call to btrfs_wait_marked_extents() won't find those ranges for which we started writeback, causing a transaction commit or a log commit to persist a new superblock without waiting for the writeback of extents in that range to finish first. Therefore if a crash happens after persisting the new superblock and before writeback finishes, we have a superblock pointing to roots that weren't fully persisted or roots that point to nodes or leafs that weren't fully persisted, causing all sorts of unexpected/bad behaviour as we endup reading garbage from disk or the content of some node/leaf from a past generation that got cowed or deleted and is no longer valid (for this later case we end up getting error messages like "parent transid verify failed on X wanted Y found Z" when reading btree nodes/leafs from disk). Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: Chris Mason <clm@fb.com>
2014-10-13 19:28:37 +08:00
/*
* convert_extent_bit can return -ENOMEM, which is most of the
* time a temporary error. So when it happens, ignore the error
* and wait for writeback of this range to finish - because we
* failed to set the bit EXTENT_NEED_WAIT for the range, a call
* to __btrfs_wait_marked_extents() would not know that
* writeback for this range started and therefore wouldn't
* wait for it to finish - we don't want to commit a
* superblock that points to btree nodes/leafs for which
* writeback hasn't finished yet (and without errors).
Btrfs: deal with convert_extent_bit errors to avoid fs corruption When committing a transaction or a log, we look for btree extents that need to be durably persisted by searching for ranges in a io tree that have some bits set (EXTENT_DIRTY or EXTENT_NEW). We then attempt to clear those bits and set the EXTENT_NEED_WAIT bit, with calls to the function convert_extent_bit, and then start writeback for the extents. That function however can return an error (at the moment only -ENOMEM is possible, specially when it does GFP_ATOMIC allocation requests through alloc_extent_state_atomic) - that means the ranges didn't got the EXTENT_NEED_WAIT bit set (or at least not for the whole range), which in turn means a call to btrfs_wait_marked_extents() won't find those ranges for which we started writeback, causing a transaction commit or a log commit to persist a new superblock without waiting for the writeback of extents in that range to finish first. Therefore if a crash happens after persisting the new superblock and before writeback finishes, we have a superblock pointing to roots that weren't fully persisted or roots that point to nodes or leafs that weren't fully persisted, causing all sorts of unexpected/bad behaviour as we endup reading garbage from disk or the content of some node/leaf from a past generation that got cowed or deleted and is no longer valid (for this later case we end up getting error messages like "parent transid verify failed on X wanted Y found Z" when reading btree nodes/leafs from disk). Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: Chris Mason <clm@fb.com>
2014-10-13 19:28:37 +08:00
* We cleanup any entries left in the io tree when committing
* the transaction (through extent_io_tree_release()).
Btrfs: deal with convert_extent_bit errors to avoid fs corruption When committing a transaction or a log, we look for btree extents that need to be durably persisted by searching for ranges in a io tree that have some bits set (EXTENT_DIRTY or EXTENT_NEW). We then attempt to clear those bits and set the EXTENT_NEED_WAIT bit, with calls to the function convert_extent_bit, and then start writeback for the extents. That function however can return an error (at the moment only -ENOMEM is possible, specially when it does GFP_ATOMIC allocation requests through alloc_extent_state_atomic) - that means the ranges didn't got the EXTENT_NEED_WAIT bit set (or at least not for the whole range), which in turn means a call to btrfs_wait_marked_extents() won't find those ranges for which we started writeback, causing a transaction commit or a log commit to persist a new superblock without waiting for the writeback of extents in that range to finish first. Therefore if a crash happens after persisting the new superblock and before writeback finishes, we have a superblock pointing to roots that weren't fully persisted or roots that point to nodes or leafs that weren't fully persisted, causing all sorts of unexpected/bad behaviour as we endup reading garbage from disk or the content of some node/leaf from a past generation that got cowed or deleted and is no longer valid (for this later case we end up getting error messages like "parent transid verify failed on X wanted Y found Z" when reading btree nodes/leafs from disk). Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: Chris Mason <clm@fb.com>
2014-10-13 19:28:37 +08:00
*/
if (err == -ENOMEM) {
err = 0;
wait_writeback = true;
}
if (!err)
err = filemap_fdatawrite_range(mapping, start, end);
if (err)
werr = err;
Btrfs: deal with convert_extent_bit errors to avoid fs corruption When committing a transaction or a log, we look for btree extents that need to be durably persisted by searching for ranges in a io tree that have some bits set (EXTENT_DIRTY or EXTENT_NEW). We then attempt to clear those bits and set the EXTENT_NEED_WAIT bit, with calls to the function convert_extent_bit, and then start writeback for the extents. That function however can return an error (at the moment only -ENOMEM is possible, specially when it does GFP_ATOMIC allocation requests through alloc_extent_state_atomic) - that means the ranges didn't got the EXTENT_NEED_WAIT bit set (or at least not for the whole range), which in turn means a call to btrfs_wait_marked_extents() won't find those ranges for which we started writeback, causing a transaction commit or a log commit to persist a new superblock without waiting for the writeback of extents in that range to finish first. Therefore if a crash happens after persisting the new superblock and before writeback finishes, we have a superblock pointing to roots that weren't fully persisted or roots that point to nodes or leafs that weren't fully persisted, causing all sorts of unexpected/bad behaviour as we endup reading garbage from disk or the content of some node/leaf from a past generation that got cowed or deleted and is no longer valid (for this later case we end up getting error messages like "parent transid verify failed on X wanted Y found Z" when reading btree nodes/leafs from disk). Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: Chris Mason <clm@fb.com>
2014-10-13 19:28:37 +08:00
else if (wait_writeback)
werr = filemap_fdatawait_range(mapping, start, end);
free_extent_state(cached_state);
Btrfs: deal with convert_extent_bit errors to avoid fs corruption When committing a transaction or a log, we look for btree extents that need to be durably persisted by searching for ranges in a io tree that have some bits set (EXTENT_DIRTY or EXTENT_NEW). We then attempt to clear those bits and set the EXTENT_NEED_WAIT bit, with calls to the function convert_extent_bit, and then start writeback for the extents. That function however can return an error (at the moment only -ENOMEM is possible, specially when it does GFP_ATOMIC allocation requests through alloc_extent_state_atomic) - that means the ranges didn't got the EXTENT_NEED_WAIT bit set (or at least not for the whole range), which in turn means a call to btrfs_wait_marked_extents() won't find those ranges for which we started writeback, causing a transaction commit or a log commit to persist a new superblock without waiting for the writeback of extents in that range to finish first. Therefore if a crash happens after persisting the new superblock and before writeback finishes, we have a superblock pointing to roots that weren't fully persisted or roots that point to nodes or leafs that weren't fully persisted, causing all sorts of unexpected/bad behaviour as we endup reading garbage from disk or the content of some node/leaf from a past generation that got cowed or deleted and is no longer valid (for this later case we end up getting error messages like "parent transid verify failed on X wanted Y found Z" when reading btree nodes/leafs from disk). Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: Chris Mason <clm@fb.com>
2014-10-13 19:28:37 +08:00
cached_state = NULL;
cond_resched();
start = end + 1;
}
atomic_dec(&BTRFS_I(fs_info->btree_inode)->sync_writers);
return werr;
}
/*
* when btree blocks are allocated, they have some corresponding bits set for
* them in one of two extent_io trees. This is used to make sure all of
* those extents are on disk for transaction or log commit. We wait
* on all the pages and clear them from the dirty pages state tree
*/
static int __btrfs_wait_marked_extents(struct btrfs_fs_info *fs_info,
struct extent_io_tree *dirty_pages)
{
int err = 0;
int werr = 0;
struct address_space *mapping = fs_info->btree_inode->i_mapping;
struct extent_state *cached_state = NULL;
u64 start = 0;
u64 end;
while (!find_first_extent_bit(dirty_pages, start, &start, &end,
EXTENT_NEED_WAIT, &cached_state)) {
Btrfs: deal with convert_extent_bit errors to avoid fs corruption When committing a transaction or a log, we look for btree extents that need to be durably persisted by searching for ranges in a io tree that have some bits set (EXTENT_DIRTY or EXTENT_NEW). We then attempt to clear those bits and set the EXTENT_NEED_WAIT bit, with calls to the function convert_extent_bit, and then start writeback for the extents. That function however can return an error (at the moment only -ENOMEM is possible, specially when it does GFP_ATOMIC allocation requests through alloc_extent_state_atomic) - that means the ranges didn't got the EXTENT_NEED_WAIT bit set (or at least not for the whole range), which in turn means a call to btrfs_wait_marked_extents() won't find those ranges for which we started writeback, causing a transaction commit or a log commit to persist a new superblock without waiting for the writeback of extents in that range to finish first. Therefore if a crash happens after persisting the new superblock and before writeback finishes, we have a superblock pointing to roots that weren't fully persisted or roots that point to nodes or leafs that weren't fully persisted, causing all sorts of unexpected/bad behaviour as we endup reading garbage from disk or the content of some node/leaf from a past generation that got cowed or deleted and is no longer valid (for this later case we end up getting error messages like "parent transid verify failed on X wanted Y found Z" when reading btree nodes/leafs from disk). Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: Chris Mason <clm@fb.com>
2014-10-13 19:28:37 +08:00
/*
* Ignore -ENOMEM errors returned by clear_extent_bit().
* When committing the transaction, we'll remove any entries
* left in the io tree. For a log commit, we don't remove them
* after committing the log because the tree can be accessed
* concurrently - we do it only at transaction commit time when
* it's safe to do it (through extent_io_tree_release()).
Btrfs: deal with convert_extent_bit errors to avoid fs corruption When committing a transaction or a log, we look for btree extents that need to be durably persisted by searching for ranges in a io tree that have some bits set (EXTENT_DIRTY or EXTENT_NEW). We then attempt to clear those bits and set the EXTENT_NEED_WAIT bit, with calls to the function convert_extent_bit, and then start writeback for the extents. That function however can return an error (at the moment only -ENOMEM is possible, specially when it does GFP_ATOMIC allocation requests through alloc_extent_state_atomic) - that means the ranges didn't got the EXTENT_NEED_WAIT bit set (or at least not for the whole range), which in turn means a call to btrfs_wait_marked_extents() won't find those ranges for which we started writeback, causing a transaction commit or a log commit to persist a new superblock without waiting for the writeback of extents in that range to finish first. Therefore if a crash happens after persisting the new superblock and before writeback finishes, we have a superblock pointing to roots that weren't fully persisted or roots that point to nodes or leafs that weren't fully persisted, causing all sorts of unexpected/bad behaviour as we endup reading garbage from disk or the content of some node/leaf from a past generation that got cowed or deleted and is no longer valid (for this later case we end up getting error messages like "parent transid verify failed on X wanted Y found Z" when reading btree nodes/leafs from disk). Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: Chris Mason <clm@fb.com>
2014-10-13 19:28:37 +08:00
*/
err = clear_extent_bit(dirty_pages, start, end,
EXTENT_NEED_WAIT, 0, 0, &cached_state);
Btrfs: deal with convert_extent_bit errors to avoid fs corruption When committing a transaction or a log, we look for btree extents that need to be durably persisted by searching for ranges in a io tree that have some bits set (EXTENT_DIRTY or EXTENT_NEW). We then attempt to clear those bits and set the EXTENT_NEED_WAIT bit, with calls to the function convert_extent_bit, and then start writeback for the extents. That function however can return an error (at the moment only -ENOMEM is possible, specially when it does GFP_ATOMIC allocation requests through alloc_extent_state_atomic) - that means the ranges didn't got the EXTENT_NEED_WAIT bit set (or at least not for the whole range), which in turn means a call to btrfs_wait_marked_extents() won't find those ranges for which we started writeback, causing a transaction commit or a log commit to persist a new superblock without waiting for the writeback of extents in that range to finish first. Therefore if a crash happens after persisting the new superblock and before writeback finishes, we have a superblock pointing to roots that weren't fully persisted or roots that point to nodes or leafs that weren't fully persisted, causing all sorts of unexpected/bad behaviour as we endup reading garbage from disk or the content of some node/leaf from a past generation that got cowed or deleted and is no longer valid (for this later case we end up getting error messages like "parent transid verify failed on X wanted Y found Z" when reading btree nodes/leafs from disk). Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: Chris Mason <clm@fb.com>
2014-10-13 19:28:37 +08:00
if (err == -ENOMEM)
err = 0;
if (!err)
err = filemap_fdatawait_range(mapping, start, end);
if (err)
werr = err;
free_extent_state(cached_state);
cached_state = NULL;
cond_resched();
start = end + 1;
}
if (err)
werr = err;
return werr;
}
Btrfs: be aware of btree inode write errors to avoid fs corruption While we have a transaction ongoing, the VM might decide at any time to call btree_inode->i_mapping->a_ops->writepages(), which will start writeback of dirty pages belonging to btree nodes/leafs. This call might return an error or the writeback might finish with an error before we attempt to commit the running transaction. If this happens, we might have no way of knowing that such error happened when we are committing the transaction - because the pages might no longer be marked dirty nor tagged for writeback (if a subsequent modification to the extent buffer didn't happen before the transaction commit) which makes filemap_fdata[write|wait]_range unable to find such pages (even if they're marked with SetPageError). So if this happens we must abort the transaction, otherwise we commit a super block with btree roots that point to btree nodes/leafs whose content on disk is invalid - either garbage or the content of some node/leaf from a past generation that got cowed or deleted and is no longer valid (for this later case we end up getting error messages like "parent transid verify failed on 10826481664 wanted 25748 found 29562" when reading btree nodes/leafs from disk). Note that setting and checking AS_EIO/AS_ENOSPC in the btree inode's i_mapping would not be enough because we need to distinguish between log tree extents (not fatal) vs non-log tree extents (fatal) and because the next call to filemap_fdatawait_range() will catch and clear such errors in the mapping - and that call might be from a log sync and not from a transaction commit, which means we would not know about the error at transaction commit time. Also, checking for the eb flag EXTENT_BUFFER_IOERR at transaction commit time isn't done and would not be completely reliable, as the eb might be removed from memory and read back when trying to get it, which clears that flag right before reading the eb's pages from disk, making us not know about the previous write error. Using the new 3 flags for the btree inode also makes us achieve the goal of AS_EIO/AS_ENOSPC when writepages() returns success, started writeback for all dirty pages and before filemap_fdatawait_range() is called, the writeback for all dirty pages had already finished with errors - because we were not using AS_EIO/AS_ENOSPC, filemap_fdatawait_range() would return success, as it could not know that writeback errors happened (the pages were no longer tagged for writeback). Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: Chris Mason <clm@fb.com>
2014-09-26 19:25:56 +08:00
static int btrfs_wait_extents(struct btrfs_fs_info *fs_info,
struct extent_io_tree *dirty_pages)
{
bool errors = false;
int err;
Btrfs: be aware of btree inode write errors to avoid fs corruption While we have a transaction ongoing, the VM might decide at any time to call btree_inode->i_mapping->a_ops->writepages(), which will start writeback of dirty pages belonging to btree nodes/leafs. This call might return an error or the writeback might finish with an error before we attempt to commit the running transaction. If this happens, we might have no way of knowing that such error happened when we are committing the transaction - because the pages might no longer be marked dirty nor tagged for writeback (if a subsequent modification to the extent buffer didn't happen before the transaction commit) which makes filemap_fdata[write|wait]_range unable to find such pages (even if they're marked with SetPageError). So if this happens we must abort the transaction, otherwise we commit a super block with btree roots that point to btree nodes/leafs whose content on disk is invalid - either garbage or the content of some node/leaf from a past generation that got cowed or deleted and is no longer valid (for this later case we end up getting error messages like "parent transid verify failed on 10826481664 wanted 25748 found 29562" when reading btree nodes/leafs from disk). Note that setting and checking AS_EIO/AS_ENOSPC in the btree inode's i_mapping would not be enough because we need to distinguish between log tree extents (not fatal) vs non-log tree extents (fatal) and because the next call to filemap_fdatawait_range() will catch and clear such errors in the mapping - and that call might be from a log sync and not from a transaction commit, which means we would not know about the error at transaction commit time. Also, checking for the eb flag EXTENT_BUFFER_IOERR at transaction commit time isn't done and would not be completely reliable, as the eb might be removed from memory and read back when trying to get it, which clears that flag right before reading the eb's pages from disk, making us not know about the previous write error. Using the new 3 flags for the btree inode also makes us achieve the goal of AS_EIO/AS_ENOSPC when writepages() returns success, started writeback for all dirty pages and before filemap_fdatawait_range() is called, the writeback for all dirty pages had already finished with errors - because we were not using AS_EIO/AS_ENOSPC, filemap_fdatawait_range() would return success, as it could not know that writeback errors happened (the pages were no longer tagged for writeback). Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: Chris Mason <clm@fb.com>
2014-09-26 19:25:56 +08:00
err = __btrfs_wait_marked_extents(fs_info, dirty_pages);
if (test_and_clear_bit(BTRFS_FS_BTREE_ERR, &fs_info->flags))
errors = true;
if (errors && !err)
err = -EIO;
return err;
}
Btrfs: be aware of btree inode write errors to avoid fs corruption While we have a transaction ongoing, the VM might decide at any time to call btree_inode->i_mapping->a_ops->writepages(), which will start writeback of dirty pages belonging to btree nodes/leafs. This call might return an error or the writeback might finish with an error before we attempt to commit the running transaction. If this happens, we might have no way of knowing that such error happened when we are committing the transaction - because the pages might no longer be marked dirty nor tagged for writeback (if a subsequent modification to the extent buffer didn't happen before the transaction commit) which makes filemap_fdata[write|wait]_range unable to find such pages (even if they're marked with SetPageError). So if this happens we must abort the transaction, otherwise we commit a super block with btree roots that point to btree nodes/leafs whose content on disk is invalid - either garbage or the content of some node/leaf from a past generation that got cowed or deleted and is no longer valid (for this later case we end up getting error messages like "parent transid verify failed on 10826481664 wanted 25748 found 29562" when reading btree nodes/leafs from disk). Note that setting and checking AS_EIO/AS_ENOSPC in the btree inode's i_mapping would not be enough because we need to distinguish between log tree extents (not fatal) vs non-log tree extents (fatal) and because the next call to filemap_fdatawait_range() will catch and clear such errors in the mapping - and that call might be from a log sync and not from a transaction commit, which means we would not know about the error at transaction commit time. Also, checking for the eb flag EXTENT_BUFFER_IOERR at transaction commit time isn't done and would not be completely reliable, as the eb might be removed from memory and read back when trying to get it, which clears that flag right before reading the eb's pages from disk, making us not know about the previous write error. Using the new 3 flags for the btree inode also makes us achieve the goal of AS_EIO/AS_ENOSPC when writepages() returns success, started writeback for all dirty pages and before filemap_fdatawait_range() is called, the writeback for all dirty pages had already finished with errors - because we were not using AS_EIO/AS_ENOSPC, filemap_fdatawait_range() would return success, as it could not know that writeback errors happened (the pages were no longer tagged for writeback). Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: Chris Mason <clm@fb.com>
2014-09-26 19:25:56 +08:00
int btrfs_wait_tree_log_extents(struct btrfs_root *log_root, int mark)
{
struct btrfs_fs_info *fs_info = log_root->fs_info;
struct extent_io_tree *dirty_pages = &log_root->dirty_log_pages;
bool errors = false;
int err;
Btrfs: be aware of btree inode write errors to avoid fs corruption While we have a transaction ongoing, the VM might decide at any time to call btree_inode->i_mapping->a_ops->writepages(), which will start writeback of dirty pages belonging to btree nodes/leafs. This call might return an error or the writeback might finish with an error before we attempt to commit the running transaction. If this happens, we might have no way of knowing that such error happened when we are committing the transaction - because the pages might no longer be marked dirty nor tagged for writeback (if a subsequent modification to the extent buffer didn't happen before the transaction commit) which makes filemap_fdata[write|wait]_range unable to find such pages (even if they're marked with SetPageError). So if this happens we must abort the transaction, otherwise we commit a super block with btree roots that point to btree nodes/leafs whose content on disk is invalid - either garbage or the content of some node/leaf from a past generation that got cowed or deleted and is no longer valid (for this later case we end up getting error messages like "parent transid verify failed on 10826481664 wanted 25748 found 29562" when reading btree nodes/leafs from disk). Note that setting and checking AS_EIO/AS_ENOSPC in the btree inode's i_mapping would not be enough because we need to distinguish between log tree extents (not fatal) vs non-log tree extents (fatal) and because the next call to filemap_fdatawait_range() will catch and clear such errors in the mapping - and that call might be from a log sync and not from a transaction commit, which means we would not know about the error at transaction commit time. Also, checking for the eb flag EXTENT_BUFFER_IOERR at transaction commit time isn't done and would not be completely reliable, as the eb might be removed from memory and read back when trying to get it, which clears that flag right before reading the eb's pages from disk, making us not know about the previous write error. Using the new 3 flags for the btree inode also makes us achieve the goal of AS_EIO/AS_ENOSPC when writepages() returns success, started writeback for all dirty pages and before filemap_fdatawait_range() is called, the writeback for all dirty pages had already finished with errors - because we were not using AS_EIO/AS_ENOSPC, filemap_fdatawait_range() would return success, as it could not know that writeback errors happened (the pages were no longer tagged for writeback). Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: Chris Mason <clm@fb.com>
2014-09-26 19:25:56 +08:00
ASSERT(log_root->root_key.objectid == BTRFS_TREE_LOG_OBJECTID);
err = __btrfs_wait_marked_extents(fs_info, dirty_pages);
if ((mark & EXTENT_DIRTY) &&
test_and_clear_bit(BTRFS_FS_LOG1_ERR, &fs_info->flags))
errors = true;
if ((mark & EXTENT_NEW) &&
test_and_clear_bit(BTRFS_FS_LOG2_ERR, &fs_info->flags))
errors = true;
if (errors && !err)
err = -EIO;
return err;
}
/*
* When btree blocks are allocated the corresponding extents are marked dirty.
* This function ensures such extents are persisted on disk for transaction or
* log commit.
*
* @trans: transaction whose dirty pages we'd like to write
*/
static int btrfs_write_and_wait_transaction(struct btrfs_trans_handle *trans)
{
int ret;
int ret2;
struct extent_io_tree *dirty_pages = &trans->transaction->dirty_pages;
struct btrfs_fs_info *fs_info = trans->fs_info;
struct blk_plug plug;
blk_start_plug(&plug);
ret = btrfs_write_marked_extents(fs_info, dirty_pages, EXTENT_DIRTY);
blk_finish_plug(&plug);
ret2 = btrfs_wait_extents(fs_info, dirty_pages);
extent_io_tree_release(&trans->transaction->dirty_pages);
if (ret)
return ret;
else if (ret2)
return ret2;
else
return 0;
}
/*
* this is used to update the root pointer in the tree of tree roots.
*
* But, in the case of the extent allocation tree, updating the root
* pointer may allocate blocks which may change the root of the extent
* allocation tree.
*
* So, this loops and repeats and makes sure the cowonly root didn't
* change while the root pointer was being updated in the metadata.
*/
static int update_cowonly_root(struct btrfs_trans_handle *trans,
struct btrfs_root *root)
{
int ret;
u64 old_root_bytenr;
u64 old_root_used;
struct btrfs_fs_info *fs_info = root->fs_info;
struct btrfs_root *tree_root = fs_info->tree_root;
old_root_used = btrfs_root_used(&root->root_item);
Btrfs: do extent allocation and reference count updates in the background The extent allocation tree maintains a reference count and full back reference information for every extent allocated in the filesystem. For subvolume and snapshot trees, every time a block goes through COW, the new copy of the block adds a reference on every block it points to. If a btree node points to 150 leaves, then the COW code needs to go and add backrefs on 150 different extents, which might be spread all over the extent allocation tree. These updates currently happen during btrfs_cow_block, and most COWs happen during btrfs_search_slot. btrfs_search_slot has locks held on both the parent and the node we are COWing, and so we really want to avoid IO during the COW if we can. This commit adds an rbtree of pending reference count updates and extent allocations. The tree is ordered by byte number of the extent and byte number of the parent for the back reference. The tree allows us to: 1) Modify back references in something close to disk order, reducing seeks 2) Significantly reduce the number of modifications made as block pointers are balanced around 3) Do all of the extent insertion and back reference modifications outside of the performance critical btrfs_search_slot code. #3 has the added benefit of greatly reducing the btrfs stack footprint. The extent allocation tree modifications are done without the deep (and somewhat recursive) call chains used in the past. These delayed back reference updates must be done before the transaction commits, and so the rbtree is tied to the transaction. Throttling is implemented to help keep the queue of backrefs at a reasonable size. Since there was a similar mechanism in place for the extent tree extents, that is removed and replaced by the delayed reference tree. Yan Zheng <yan.zheng@oracle.com> helped review and fixup this code. Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-03-13 22:10:06 +08:00
while (1) {
old_root_bytenr = btrfs_root_bytenr(&root->root_item);
if (old_root_bytenr == root->node->start &&
old_root_used == btrfs_root_used(&root->root_item))
break;
Btrfs: Mixed back reference (FORWARD ROLLING FORMAT CHANGE) This commit introduces a new kind of back reference for btrfs metadata. Once a filesystem has been mounted with this commit, IT WILL NO LONGER BE MOUNTABLE BY OLDER KERNELS. When a tree block in subvolume tree is cow'd, the reference counts of all extents it points to are increased by one. At transaction commit time, the old root of the subvolume is recorded in a "dead root" data structure, and the btree it points to is later walked, dropping reference counts and freeing any blocks where the reference count goes to 0. The increments done during cow and decrements done after commit cancel out, and the walk is a very expensive way to go about freeing the blocks that are no longer referenced by the new btree root. This commit reduces the transaction overhead by avoiding the need for dead root records. When a non-shared tree block is cow'd, we free the old block at once, and the new block inherits old block's references. When a tree block with reference count > 1 is cow'd, we increase the reference counts of all extents the new block points to by one, and decrease the old block's reference count by one. This dead tree avoidance code removes the need to modify the reference counts of lower level extents when a non-shared tree block is cow'd. But we still need to update back ref for all pointers in the block. This is because the location of the block is recorded in the back ref item. We can solve this by introducing a new type of back ref. The new back ref provides information about pointer's key, level and in which tree the pointer lives. This information allow us to find the pointer by searching the tree. The shortcoming of the new back ref is that it only works for pointers in tree blocks referenced by their owner trees. This is mostly a problem for snapshots, where resolving one of these fuzzy back references would be O(number_of_snapshots) and quite slow. The solution used here is to use the fuzzy back references in the common case where a given tree block is only referenced by one root, and use the full back references when multiple roots have a reference on a given block. This commit adds per subvolume red-black tree to keep trace of cached inodes. The red-black tree helps the balancing code to find cached inodes whose inode numbers within a given range. This commit improves the balancing code by introducing several data structures to keep the state of balancing. The most important one is the back ref cache. It caches how the upper level tree blocks are referenced. This greatly reduce the overhead of checking back ref. The improved balancing code scales significantly better with a large number of snapshots. This is a very large commit and was written in a number of pieces. But, they depend heavily on the disk format change and were squashed together to make sure git bisect didn't end up in a bad state wrt space balancing or the format change. Signed-off-by: Yan Zheng <zheng.yan@oracle.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-06-10 22:45:14 +08:00
btrfs_set_root_node(&root->root_item, root->node);
ret = btrfs_update_root(trans, tree_root,
&root->root_key,
&root->root_item);
if (ret)
return ret;
Btrfs: do extent allocation and reference count updates in the background The extent allocation tree maintains a reference count and full back reference information for every extent allocated in the filesystem. For subvolume and snapshot trees, every time a block goes through COW, the new copy of the block adds a reference on every block it points to. If a btree node points to 150 leaves, then the COW code needs to go and add backrefs on 150 different extents, which might be spread all over the extent allocation tree. These updates currently happen during btrfs_cow_block, and most COWs happen during btrfs_search_slot. btrfs_search_slot has locks held on both the parent and the node we are COWing, and so we really want to avoid IO during the COW if we can. This commit adds an rbtree of pending reference count updates and extent allocations. The tree is ordered by byte number of the extent and byte number of the parent for the back reference. The tree allows us to: 1) Modify back references in something close to disk order, reducing seeks 2) Significantly reduce the number of modifications made as block pointers are balanced around 3) Do all of the extent insertion and back reference modifications outside of the performance critical btrfs_search_slot code. #3 has the added benefit of greatly reducing the btrfs stack footprint. The extent allocation tree modifications are done without the deep (and somewhat recursive) call chains used in the past. These delayed back reference updates must be done before the transaction commits, and so the rbtree is tied to the transaction. Throttling is implemented to help keep the queue of backrefs at a reasonable size. Since there was a similar mechanism in place for the extent tree extents, that is removed and replaced by the delayed reference tree. Yan Zheng <yan.zheng@oracle.com> helped review and fixup this code. Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-03-13 22:10:06 +08:00
old_root_used = btrfs_root_used(&root->root_item);
}
return 0;
}
/*
* update all the cowonly tree roots on disk
*
* The error handling in this function may not be obvious. Any of the
* failures will cause the file system to go offline. We still need
* to clean up the delayed refs.
*/
static noinline int commit_cowonly_roots(struct btrfs_trans_handle *trans)
{
struct btrfs_fs_info *fs_info = trans->fs_info;
struct list_head *dirty_bgs = &trans->transaction->dirty_bgs;
struct list_head *io_bgs = &trans->transaction->io_bgs;
struct list_head *next;
struct extent_buffer *eb;
Btrfs: do extent allocation and reference count updates in the background The extent allocation tree maintains a reference count and full back reference information for every extent allocated in the filesystem. For subvolume and snapshot trees, every time a block goes through COW, the new copy of the block adds a reference on every block it points to. If a btree node points to 150 leaves, then the COW code needs to go and add backrefs on 150 different extents, which might be spread all over the extent allocation tree. These updates currently happen during btrfs_cow_block, and most COWs happen during btrfs_search_slot. btrfs_search_slot has locks held on both the parent and the node we are COWing, and so we really want to avoid IO during the COW if we can. This commit adds an rbtree of pending reference count updates and extent allocations. The tree is ordered by byte number of the extent and byte number of the parent for the back reference. The tree allows us to: 1) Modify back references in something close to disk order, reducing seeks 2) Significantly reduce the number of modifications made as block pointers are balanced around 3) Do all of the extent insertion and back reference modifications outside of the performance critical btrfs_search_slot code. #3 has the added benefit of greatly reducing the btrfs stack footprint. The extent allocation tree modifications are done without the deep (and somewhat recursive) call chains used in the past. These delayed back reference updates must be done before the transaction commits, and so the rbtree is tied to the transaction. Throttling is implemented to help keep the queue of backrefs at a reasonable size. Since there was a similar mechanism in place for the extent tree extents, that is removed and replaced by the delayed reference tree. Yan Zheng <yan.zheng@oracle.com> helped review and fixup this code. Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-03-13 22:10:06 +08:00
int ret;
btrfs: reduce the scope of the tree log mutex during transaction commit In the transaction commit path we are acquiring the tree log mutex too early and we have a stale comment because: 1) It mentions a function named btrfs_commit_tree_roots(), which does not exists anymore, it was the old name of commit_cowonly_roots(), renamed a very long time ago by commit 5d4f98a28c7d33 ("Btrfs: Mixed back reference (FORWARD ROLLING FORMAT CHANGE)")); 2) It mentions that we need to acquire the tree log mutex at that point to ensure we have no running log writers. That is not correct anymore, for many years at least, since we are guaranteed that we do not have any log writers at that point simply because we have set the state of the transaction to TRANS_STATE_COMMIT_DOING and have waited for all writers to complete - meaning no one can log until we change the state of the transaction to TRANS_STATE_UNBLOCKED. Any attempts to join the transaction or start a new one will block until we do that state transition; 3) The comment mentions a "trans mutex" which doesn't exists since 2011, commit a4abeea41adf ("Btrfs: kill trans_mutex") removed it; 4) The current use of the tree log mutex is to ensure proper serialization of super block writes - if someone started a new transaction and uses it for logging, it will wait for the previous transaction to write its super block before writing the super block when attempting to sync the log. So acquire the tree log mutex only when it's absolutely needed, before setting the transaction state to TRANS_STATE_UNBLOCKED, fix and move the stale comment, add some assertions and new comments where appropriate. Also, this has no effect on concurrency or performance, since the new start of the critical section is still when the transaction is in the state TRANS_STATE_COMMIT_DOING. Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2021-11-10 18:05:21 +08:00
/*
* At this point no one can be using this transaction to modify any tree
* and no one can start another transaction to modify any tree either.
*/
ASSERT(trans->transaction->state == TRANS_STATE_COMMIT_DOING);
eb = btrfs_lock_root_node(fs_info->tree_root);
ret = btrfs_cow_block(trans, fs_info->tree_root, eb, NULL,
0, &eb, BTRFS_NESTING_COW);
btrfs_tree_unlock(eb);
free_extent_buffer(eb);
if (ret)
return ret;
ret = btrfs_run_dev_stats(trans);
if (ret)
return ret;
ret = btrfs_run_dev_replace(trans);
if (ret)
return ret;
ret = btrfs_run_qgroups(trans);
if (ret)
return ret;
ret = btrfs_setup_space_cache(trans);
if (ret)
return ret;
again:
while (!list_empty(&fs_info->dirty_cowonly_roots)) {
struct btrfs_root *root;
next = fs_info->dirty_cowonly_roots.next;
list_del_init(next);
root = list_entry(next, struct btrfs_root, dirty_list);
clear_bit(BTRFS_ROOT_DIRTY, &root->state);
list_add_tail(&root->dirty_list,
&trans->transaction->switch_commits);
ret = update_cowonly_root(trans, root);
if (ret)
return ret;
}
/* Now flush any delayed refs generated by updating all of the roots */
ret = btrfs_run_delayed_refs(trans, (unsigned long)-1);
if (ret)
return ret;
while (!list_empty(dirty_bgs) || !list_empty(io_bgs)) {
ret = btrfs_write_dirty_block_groups(trans);
if (ret)
return ret;
/*
* We're writing the dirty block groups, which could generate
* delayed refs, which could generate more dirty block groups,
* so we want to keep this flushing in this loop to make sure
* everything gets run.
*/
ret = btrfs_run_delayed_refs(trans, (unsigned long)-1);
if (ret)
return ret;
}
if (!list_empty(&fs_info->dirty_cowonly_roots))
goto again;
/* Update dev-replace pointer once everything is committed */
fs_info->dev_replace.committed_cursor_left =
fs_info->dev_replace.cursor_left_last_write_of_item;
return 0;
}
btrfs: do not start relocation until in progress drops are done We hit a bug with a recovering relocation on mount for one of our file systems in production. I reproduced this locally by injecting errors into snapshot delete with balance running at the same time. This presented as an error while looking up an extent item WARNING: CPU: 5 PID: 1501 at fs/btrfs/extent-tree.c:866 lookup_inline_extent_backref+0x647/0x680 CPU: 5 PID: 1501 Comm: btrfs-balance Not tainted 5.16.0-rc8+ #8 RIP: 0010:lookup_inline_extent_backref+0x647/0x680 RSP: 0018:ffffae0a023ab960 EFLAGS: 00010202 RAX: 0000000000000001 RBX: 0000000000000000 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 000000000000000c RDI: 0000000000000000 RBP: ffff943fd2a39b60 R08: 0000000000000000 R09: 0000000000000001 R10: 0001434088152de0 R11: 0000000000000000 R12: 0000000001d05000 R13: ffff943fd2a39b60 R14: ffff943fdb96f2a0 R15: ffff9442fc923000 FS: 0000000000000000(0000) GS:ffff944e9eb40000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f1157b1fca8 CR3: 000000010f092000 CR4: 0000000000350ee0 Call Trace: <TASK> insert_inline_extent_backref+0x46/0xd0 __btrfs_inc_extent_ref.isra.0+0x5f/0x200 ? btrfs_merge_delayed_refs+0x164/0x190 __btrfs_run_delayed_refs+0x561/0xfa0 ? btrfs_search_slot+0x7b4/0xb30 ? btrfs_update_root+0x1a9/0x2c0 btrfs_run_delayed_refs+0x73/0x1f0 ? btrfs_update_root+0x1a9/0x2c0 btrfs_commit_transaction+0x50/0xa50 ? btrfs_update_reloc_root+0x122/0x220 prepare_to_merge+0x29f/0x320 relocate_block_group+0x2b8/0x550 btrfs_relocate_block_group+0x1a6/0x350 btrfs_relocate_chunk+0x27/0xe0 btrfs_balance+0x777/0xe60 balance_kthread+0x35/0x50 ? btrfs_balance+0xe60/0xe60 kthread+0x16b/0x190 ? set_kthread_struct+0x40/0x40 ret_from_fork+0x22/0x30 </TASK> Normally snapshot deletion and relocation are excluded from running at the same time by the fs_info->cleaner_mutex. However if we had a pending balance waiting to get the ->cleaner_mutex, and a snapshot deletion was running, and then the box crashed, we would come up in a state where we have a half deleted snapshot. Again, in the normal case the snapshot deletion needs to complete before relocation can start, but in this case relocation could very well start before the snapshot deletion completes, as we simply add the root to the dead roots list and wait for the next time the cleaner runs to clean up the snapshot. Fix this by setting a bit on the fs_info if we have any DEAD_ROOT's that had a pending drop_progress key. If they do then we know we were in the middle of the drop operation and set a flag on the fs_info. Then balance can wait until this flag is cleared to start up again. If there are DEAD_ROOT's that don't have a drop_progress set then we're safe to start balance right away as we'll be properly protected by the cleaner_mutex. CC: stable@vger.kernel.org # 5.10+ Reviewed-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2022-02-19 03:56:10 +08:00
/*
* If we had a pending drop we need to see if there are any others left in our
* dead roots list, and if not clear our bit and wake any waiters.
*/
void btrfs_maybe_wake_unfinished_drop(struct btrfs_fs_info *fs_info)
{
/*
* We put the drop in progress roots at the front of the list, so if the
* first entry doesn't have UNFINISHED_DROP set we can wake everybody
* up.
*/
spin_lock(&fs_info->trans_lock);
if (!list_empty(&fs_info->dead_roots)) {
struct btrfs_root *root = list_first_entry(&fs_info->dead_roots,
struct btrfs_root,
root_list);
if (test_bit(BTRFS_ROOT_UNFINISHED_DROP, &root->state)) {
spin_unlock(&fs_info->trans_lock);
return;
}
}
spin_unlock(&fs_info->trans_lock);
btrfs_wake_unfinished_drop(fs_info);
}
/*
* dead roots are old snapshots that need to be deleted. This allocates
* a dirty root struct and adds it into the list of dead roots that need to
* be deleted
*/
void btrfs_add_dead_root(struct btrfs_root *root)
{
struct btrfs_fs_info *fs_info = root->fs_info;
spin_lock(&fs_info->trans_lock);
if (list_empty(&root->root_list)) {
btrfs_grab_root(root);
btrfs: do not start relocation until in progress drops are done We hit a bug with a recovering relocation on mount for one of our file systems in production. I reproduced this locally by injecting errors into snapshot delete with balance running at the same time. This presented as an error while looking up an extent item WARNING: CPU: 5 PID: 1501 at fs/btrfs/extent-tree.c:866 lookup_inline_extent_backref+0x647/0x680 CPU: 5 PID: 1501 Comm: btrfs-balance Not tainted 5.16.0-rc8+ #8 RIP: 0010:lookup_inline_extent_backref+0x647/0x680 RSP: 0018:ffffae0a023ab960 EFLAGS: 00010202 RAX: 0000000000000001 RBX: 0000000000000000 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 000000000000000c RDI: 0000000000000000 RBP: ffff943fd2a39b60 R08: 0000000000000000 R09: 0000000000000001 R10: 0001434088152de0 R11: 0000000000000000 R12: 0000000001d05000 R13: ffff943fd2a39b60 R14: ffff943fdb96f2a0 R15: ffff9442fc923000 FS: 0000000000000000(0000) GS:ffff944e9eb40000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f1157b1fca8 CR3: 000000010f092000 CR4: 0000000000350ee0 Call Trace: <TASK> insert_inline_extent_backref+0x46/0xd0 __btrfs_inc_extent_ref.isra.0+0x5f/0x200 ? btrfs_merge_delayed_refs+0x164/0x190 __btrfs_run_delayed_refs+0x561/0xfa0 ? btrfs_search_slot+0x7b4/0xb30 ? btrfs_update_root+0x1a9/0x2c0 btrfs_run_delayed_refs+0x73/0x1f0 ? btrfs_update_root+0x1a9/0x2c0 btrfs_commit_transaction+0x50/0xa50 ? btrfs_update_reloc_root+0x122/0x220 prepare_to_merge+0x29f/0x320 relocate_block_group+0x2b8/0x550 btrfs_relocate_block_group+0x1a6/0x350 btrfs_relocate_chunk+0x27/0xe0 btrfs_balance+0x777/0xe60 balance_kthread+0x35/0x50 ? btrfs_balance+0xe60/0xe60 kthread+0x16b/0x190 ? set_kthread_struct+0x40/0x40 ret_from_fork+0x22/0x30 </TASK> Normally snapshot deletion and relocation are excluded from running at the same time by the fs_info->cleaner_mutex. However if we had a pending balance waiting to get the ->cleaner_mutex, and a snapshot deletion was running, and then the box crashed, we would come up in a state where we have a half deleted snapshot. Again, in the normal case the snapshot deletion needs to complete before relocation can start, but in this case relocation could very well start before the snapshot deletion completes, as we simply add the root to the dead roots list and wait for the next time the cleaner runs to clean up the snapshot. Fix this by setting a bit on the fs_info if we have any DEAD_ROOT's that had a pending drop_progress key. If they do then we know we were in the middle of the drop operation and set a flag on the fs_info. Then balance can wait until this flag is cleared to start up again. If there are DEAD_ROOT's that don't have a drop_progress set then we're safe to start balance right away as we'll be properly protected by the cleaner_mutex. CC: stable@vger.kernel.org # 5.10+ Reviewed-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2022-02-19 03:56:10 +08:00
/* We want to process the partially complete drops first. */
if (test_bit(BTRFS_ROOT_UNFINISHED_DROP, &root->state))
list_add(&root->root_list, &fs_info->dead_roots);
else
list_add_tail(&root->root_list, &fs_info->dead_roots);
}
spin_unlock(&fs_info->trans_lock);
}
/*
btrfs: reduce the scope of the tree log mutex during transaction commit In the transaction commit path we are acquiring the tree log mutex too early and we have a stale comment because: 1) It mentions a function named btrfs_commit_tree_roots(), which does not exists anymore, it was the old name of commit_cowonly_roots(), renamed a very long time ago by commit 5d4f98a28c7d33 ("Btrfs: Mixed back reference (FORWARD ROLLING FORMAT CHANGE)")); 2) It mentions that we need to acquire the tree log mutex at that point to ensure we have no running log writers. That is not correct anymore, for many years at least, since we are guaranteed that we do not have any log writers at that point simply because we have set the state of the transaction to TRANS_STATE_COMMIT_DOING and have waited for all writers to complete - meaning no one can log until we change the state of the transaction to TRANS_STATE_UNBLOCKED. Any attempts to join the transaction or start a new one will block until we do that state transition; 3) The comment mentions a "trans mutex" which doesn't exists since 2011, commit a4abeea41adf ("Btrfs: kill trans_mutex") removed it; 4) The current use of the tree log mutex is to ensure proper serialization of super block writes - if someone started a new transaction and uses it for logging, it will wait for the previous transaction to write its super block before writing the super block when attempting to sync the log. So acquire the tree log mutex only when it's absolutely needed, before setting the transaction state to TRANS_STATE_UNBLOCKED, fix and move the stale comment, add some assertions and new comments where appropriate. Also, this has no effect on concurrency or performance, since the new start of the critical section is still when the transaction is in the state TRANS_STATE_COMMIT_DOING. Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2021-11-10 18:05:21 +08:00
* Update each subvolume root and its relocation root, if it exists, in the tree
* of tree roots. Also free log roots if they exist.
*/
static noinline int commit_fs_roots(struct btrfs_trans_handle *trans)
{
struct btrfs_fs_info *fs_info = trans->fs_info;
struct btrfs_root *gang[8];
int i;
int ret;
btrfs: reduce the scope of the tree log mutex during transaction commit In the transaction commit path we are acquiring the tree log mutex too early and we have a stale comment because: 1) It mentions a function named btrfs_commit_tree_roots(), which does not exists anymore, it was the old name of commit_cowonly_roots(), renamed a very long time ago by commit 5d4f98a28c7d33 ("Btrfs: Mixed back reference (FORWARD ROLLING FORMAT CHANGE)")); 2) It mentions that we need to acquire the tree log mutex at that point to ensure we have no running log writers. That is not correct anymore, for many years at least, since we are guaranteed that we do not have any log writers at that point simply because we have set the state of the transaction to TRANS_STATE_COMMIT_DOING and have waited for all writers to complete - meaning no one can log until we change the state of the transaction to TRANS_STATE_UNBLOCKED. Any attempts to join the transaction or start a new one will block until we do that state transition; 3) The comment mentions a "trans mutex" which doesn't exists since 2011, commit a4abeea41adf ("Btrfs: kill trans_mutex") removed it; 4) The current use of the tree log mutex is to ensure proper serialization of super block writes - if someone started a new transaction and uses it for logging, it will wait for the previous transaction to write its super block before writing the super block when attempting to sync the log. So acquire the tree log mutex only when it's absolutely needed, before setting the transaction state to TRANS_STATE_UNBLOCKED, fix and move the stale comment, add some assertions and new comments where appropriate. Also, this has no effect on concurrency or performance, since the new start of the critical section is still when the transaction is in the state TRANS_STATE_COMMIT_DOING. Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2021-11-10 18:05:21 +08:00
/*
* At this point no one can be using this transaction to modify any tree
* and no one can start another transaction to modify any tree either.
*/
ASSERT(trans->transaction->state == TRANS_STATE_COMMIT_DOING);
Btrfs: kill trans_mutex We use trans_mutex for lots of things, here's a basic list 1) To serialize trans_handles joining the currently running transaction 2) To make sure that no new trans handles are started while we are committing 3) To protect the dead_roots list and the transaction lists Really the serializing trans_handles joining is not too hard, and can really get bogged down in acquiring a reference to the transaction. So replace the trans_mutex with a trans_lock spinlock and use it to do the following 1) Protect fs_info->running_transaction. All trans handles have to do is check this, and then take a reference of the transaction and keep on going. 2) Protect the fs_info->trans_list. This doesn't get used too much, basically it just holds the current transactions, which will usually just be the currently committing transaction and the currently running transaction at most. 3) Protect the dead roots list. This is only ever processed by splicing the list so this is relatively simple. 4) Protect the fs_info->reloc_ctl stuff. This is very lightweight and was using the trans_mutex before, so this is a pretty straightforward change. 5) Protect fs_info->no_trans_join. Because we don't hold the trans_lock over the entirety of the commit we need to have a way to block new people from creating a new transaction while we're doing our work. So we set no_trans_join and in join_transaction we test to see if that is set, and if it is we do a wait_on_commit. 6) Make the transaction use count atomic so we don't need to take locks to modify it when we're dropping references. 7) Add a commit_lock to the transaction to make sure multiple people trying to commit the same transaction don't race and commit at the same time. 8) Make open_ioctl_trans an atomic so we don't have to take any locks for ioctl trans. I have tested this with xfstests, but obviously it is a pretty hairy change so lots of testing is greatly appreciated. Thanks, Signed-off-by: Josef Bacik <josef@redhat.com>
2011-04-12 05:25:13 +08:00
spin_lock(&fs_info->fs_roots_radix_lock);
while (1) {
Btrfs: Mixed back reference (FORWARD ROLLING FORMAT CHANGE) This commit introduces a new kind of back reference for btrfs metadata. Once a filesystem has been mounted with this commit, IT WILL NO LONGER BE MOUNTABLE BY OLDER KERNELS. When a tree block in subvolume tree is cow'd, the reference counts of all extents it points to are increased by one. At transaction commit time, the old root of the subvolume is recorded in a "dead root" data structure, and the btree it points to is later walked, dropping reference counts and freeing any blocks where the reference count goes to 0. The increments done during cow and decrements done after commit cancel out, and the walk is a very expensive way to go about freeing the blocks that are no longer referenced by the new btree root. This commit reduces the transaction overhead by avoiding the need for dead root records. When a non-shared tree block is cow'd, we free the old block at once, and the new block inherits old block's references. When a tree block with reference count > 1 is cow'd, we increase the reference counts of all extents the new block points to by one, and decrease the old block's reference count by one. This dead tree avoidance code removes the need to modify the reference counts of lower level extents when a non-shared tree block is cow'd. But we still need to update back ref for all pointers in the block. This is because the location of the block is recorded in the back ref item. We can solve this by introducing a new type of back ref. The new back ref provides information about pointer's key, level and in which tree the pointer lives. This information allow us to find the pointer by searching the tree. The shortcoming of the new back ref is that it only works for pointers in tree blocks referenced by their owner trees. This is mostly a problem for snapshots, where resolving one of these fuzzy back references would be O(number_of_snapshots) and quite slow. The solution used here is to use the fuzzy back references in the common case where a given tree block is only referenced by one root, and use the full back references when multiple roots have a reference on a given block. This commit adds per subvolume red-black tree to keep trace of cached inodes. The red-black tree helps the balancing code to find cached inodes whose inode numbers within a given range. This commit improves the balancing code by introducing several data structures to keep the state of balancing. The most important one is the back ref cache. It caches how the upper level tree blocks are referenced. This greatly reduce the overhead of checking back ref. The improved balancing code scales significantly better with a large number of snapshots. This is a very large commit and was written in a number of pieces. But, they depend heavily on the disk format change and were squashed together to make sure git bisect didn't end up in a bad state wrt space balancing or the format change. Signed-off-by: Yan Zheng <zheng.yan@oracle.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-06-10 22:45:14 +08:00
ret = radix_tree_gang_lookup_tag(&fs_info->fs_roots_radix,
(void **)gang, 0,
ARRAY_SIZE(gang),
BTRFS_ROOT_TRANS_TAG);
if (ret == 0)
break;
for (i = 0; i < ret; i++) {
struct btrfs_root *root = gang[i];
int ret2;
btrfs: reduce the scope of the tree log mutex during transaction commit In the transaction commit path we are acquiring the tree log mutex too early and we have a stale comment because: 1) It mentions a function named btrfs_commit_tree_roots(), which does not exists anymore, it was the old name of commit_cowonly_roots(), renamed a very long time ago by commit 5d4f98a28c7d33 ("Btrfs: Mixed back reference (FORWARD ROLLING FORMAT CHANGE)")); 2) It mentions that we need to acquire the tree log mutex at that point to ensure we have no running log writers. That is not correct anymore, for many years at least, since we are guaranteed that we do not have any log writers at that point simply because we have set the state of the transaction to TRANS_STATE_COMMIT_DOING and have waited for all writers to complete - meaning no one can log until we change the state of the transaction to TRANS_STATE_UNBLOCKED. Any attempts to join the transaction or start a new one will block until we do that state transition; 3) The comment mentions a "trans mutex" which doesn't exists since 2011, commit a4abeea41adf ("Btrfs: kill trans_mutex") removed it; 4) The current use of the tree log mutex is to ensure proper serialization of super block writes - if someone started a new transaction and uses it for logging, it will wait for the previous transaction to write its super block before writing the super block when attempting to sync the log. So acquire the tree log mutex only when it's absolutely needed, before setting the transaction state to TRANS_STATE_UNBLOCKED, fix and move the stale comment, add some assertions and new comments where appropriate. Also, this has no effect on concurrency or performance, since the new start of the critical section is still when the transaction is in the state TRANS_STATE_COMMIT_DOING. Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2021-11-10 18:05:21 +08:00
/*
* At this point we can neither have tasks logging inodes
* from a root nor trying to commit a log tree.
*/
ASSERT(atomic_read(&root->log_writers) == 0);
ASSERT(atomic_read(&root->log_commit[0]) == 0);
ASSERT(atomic_read(&root->log_commit[1]) == 0);
Btrfs: Mixed back reference (FORWARD ROLLING FORMAT CHANGE) This commit introduces a new kind of back reference for btrfs metadata. Once a filesystem has been mounted with this commit, IT WILL NO LONGER BE MOUNTABLE BY OLDER KERNELS. When a tree block in subvolume tree is cow'd, the reference counts of all extents it points to are increased by one. At transaction commit time, the old root of the subvolume is recorded in a "dead root" data structure, and the btree it points to is later walked, dropping reference counts and freeing any blocks where the reference count goes to 0. The increments done during cow and decrements done after commit cancel out, and the walk is a very expensive way to go about freeing the blocks that are no longer referenced by the new btree root. This commit reduces the transaction overhead by avoiding the need for dead root records. When a non-shared tree block is cow'd, we free the old block at once, and the new block inherits old block's references. When a tree block with reference count > 1 is cow'd, we increase the reference counts of all extents the new block points to by one, and decrease the old block's reference count by one. This dead tree avoidance code removes the need to modify the reference counts of lower level extents when a non-shared tree block is cow'd. But we still need to update back ref for all pointers in the block. This is because the location of the block is recorded in the back ref item. We can solve this by introducing a new type of back ref. The new back ref provides information about pointer's key, level and in which tree the pointer lives. This information allow us to find the pointer by searching the tree. The shortcoming of the new back ref is that it only works for pointers in tree blocks referenced by their owner trees. This is mostly a problem for snapshots, where resolving one of these fuzzy back references would be O(number_of_snapshots) and quite slow. The solution used here is to use the fuzzy back references in the common case where a given tree block is only referenced by one root, and use the full back references when multiple roots have a reference on a given block. This commit adds per subvolume red-black tree to keep trace of cached inodes. The red-black tree helps the balancing code to find cached inodes whose inode numbers within a given range. This commit improves the balancing code by introducing several data structures to keep the state of balancing. The most important one is the back ref cache. It caches how the upper level tree blocks are referenced. This greatly reduce the overhead of checking back ref. The improved balancing code scales significantly better with a large number of snapshots. This is a very large commit and was written in a number of pieces. But, they depend heavily on the disk format change and were squashed together to make sure git bisect didn't end up in a bad state wrt space balancing or the format change. Signed-off-by: Yan Zheng <zheng.yan@oracle.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-06-10 22:45:14 +08:00
radix_tree_tag_clear(&fs_info->fs_roots_radix,
(unsigned long)root->root_key.objectid,
BTRFS_ROOT_TRANS_TAG);
Btrfs: kill trans_mutex We use trans_mutex for lots of things, here's a basic list 1) To serialize trans_handles joining the currently running transaction 2) To make sure that no new trans handles are started while we are committing 3) To protect the dead_roots list and the transaction lists Really the serializing trans_handles joining is not too hard, and can really get bogged down in acquiring a reference to the transaction. So replace the trans_mutex with a trans_lock spinlock and use it to do the following 1) Protect fs_info->running_transaction. All trans handles have to do is check this, and then take a reference of the transaction and keep on going. 2) Protect the fs_info->trans_list. This doesn't get used too much, basically it just holds the current transactions, which will usually just be the currently committing transaction and the currently running transaction at most. 3) Protect the dead roots list. This is only ever processed by splicing the list so this is relatively simple. 4) Protect the fs_info->reloc_ctl stuff. This is very lightweight and was using the trans_mutex before, so this is a pretty straightforward change. 5) Protect fs_info->no_trans_join. Because we don't hold the trans_lock over the entirety of the commit we need to have a way to block new people from creating a new transaction while we're doing our work. So we set no_trans_join and in join_transaction we test to see if that is set, and if it is we do a wait_on_commit. 6) Make the transaction use count atomic so we don't need to take locks to modify it when we're dropping references. 7) Add a commit_lock to the transaction to make sure multiple people trying to commit the same transaction don't race and commit at the same time. 8) Make open_ioctl_trans an atomic so we don't have to take any locks for ioctl trans. I have tested this with xfstests, but obviously it is a pretty hairy change so lots of testing is greatly appreciated. Thanks, Signed-off-by: Josef Bacik <josef@redhat.com>
2011-04-12 05:25:13 +08:00
spin_unlock(&fs_info->fs_roots_radix_lock);
btrfs_free_log(trans, root);
ret2 = btrfs_update_reloc_root(trans, root);
if (ret2)
return ret2;
/* see comments in should_cow_block() */
clear_bit(BTRFS_ROOT_FORCE_COW, &root->state);
smp_mb__after_atomic();
if (root->commit_root != root->node) {
list_add_tail(&root->dirty_list,
&trans->transaction->switch_commits);
btrfs_set_root_node(&root->root_item,
root->node);
}
Btrfs: Mixed back reference (FORWARD ROLLING FORMAT CHANGE) This commit introduces a new kind of back reference for btrfs metadata. Once a filesystem has been mounted with this commit, IT WILL NO LONGER BE MOUNTABLE BY OLDER KERNELS. When a tree block in subvolume tree is cow'd, the reference counts of all extents it points to are increased by one. At transaction commit time, the old root of the subvolume is recorded in a "dead root" data structure, and the btree it points to is later walked, dropping reference counts and freeing any blocks where the reference count goes to 0. The increments done during cow and decrements done after commit cancel out, and the walk is a very expensive way to go about freeing the blocks that are no longer referenced by the new btree root. This commit reduces the transaction overhead by avoiding the need for dead root records. When a non-shared tree block is cow'd, we free the old block at once, and the new block inherits old block's references. When a tree block with reference count > 1 is cow'd, we increase the reference counts of all extents the new block points to by one, and decrease the old block's reference count by one. This dead tree avoidance code removes the need to modify the reference counts of lower level extents when a non-shared tree block is cow'd. But we still need to update back ref for all pointers in the block. This is because the location of the block is recorded in the back ref item. We can solve this by introducing a new type of back ref. The new back ref provides information about pointer's key, level and in which tree the pointer lives. This information allow us to find the pointer by searching the tree. The shortcoming of the new back ref is that it only works for pointers in tree blocks referenced by their owner trees. This is mostly a problem for snapshots, where resolving one of these fuzzy back references would be O(number_of_snapshots) and quite slow. The solution used here is to use the fuzzy back references in the common case where a given tree block is only referenced by one root, and use the full back references when multiple roots have a reference on a given block. This commit adds per subvolume red-black tree to keep trace of cached inodes. The red-black tree helps the balancing code to find cached inodes whose inode numbers within a given range. This commit improves the balancing code by introducing several data structures to keep the state of balancing. The most important one is the back ref cache. It caches how the upper level tree blocks are referenced. This greatly reduce the overhead of checking back ref. The improved balancing code scales significantly better with a large number of snapshots. This is a very large commit and was written in a number of pieces. But, they depend heavily on the disk format change and were squashed together to make sure git bisect didn't end up in a bad state wrt space balancing or the format change. Signed-off-by: Yan Zheng <zheng.yan@oracle.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-06-10 22:45:14 +08:00
ret2 = btrfs_update_root(trans, fs_info->tree_root,
&root->root_key,
&root->root_item);
if (ret2)
return ret2;
Btrfs: kill trans_mutex We use trans_mutex for lots of things, here's a basic list 1) To serialize trans_handles joining the currently running transaction 2) To make sure that no new trans handles are started while we are committing 3) To protect the dead_roots list and the transaction lists Really the serializing trans_handles joining is not too hard, and can really get bogged down in acquiring a reference to the transaction. So replace the trans_mutex with a trans_lock spinlock and use it to do the following 1) Protect fs_info->running_transaction. All trans handles have to do is check this, and then take a reference of the transaction and keep on going. 2) Protect the fs_info->trans_list. This doesn't get used too much, basically it just holds the current transactions, which will usually just be the currently committing transaction and the currently running transaction at most. 3) Protect the dead roots list. This is only ever processed by splicing the list so this is relatively simple. 4) Protect the fs_info->reloc_ctl stuff. This is very lightweight and was using the trans_mutex before, so this is a pretty straightforward change. 5) Protect fs_info->no_trans_join. Because we don't hold the trans_lock over the entirety of the commit we need to have a way to block new people from creating a new transaction while we're doing our work. So we set no_trans_join and in join_transaction we test to see if that is set, and if it is we do a wait_on_commit. 6) Make the transaction use count atomic so we don't need to take locks to modify it when we're dropping references. 7) Add a commit_lock to the transaction to make sure multiple people trying to commit the same transaction don't race and commit at the same time. 8) Make open_ioctl_trans an atomic so we don't have to take any locks for ioctl trans. I have tested this with xfstests, but obviously it is a pretty hairy change so lots of testing is greatly appreciated. Thanks, Signed-off-by: Josef Bacik <josef@redhat.com>
2011-04-12 05:25:13 +08:00
spin_lock(&fs_info->fs_roots_radix_lock);
btrfs_qgroup_free_meta_all_pertrans(root);
}
}
Btrfs: kill trans_mutex We use trans_mutex for lots of things, here's a basic list 1) To serialize trans_handles joining the currently running transaction 2) To make sure that no new trans handles are started while we are committing 3) To protect the dead_roots list and the transaction lists Really the serializing trans_handles joining is not too hard, and can really get bogged down in acquiring a reference to the transaction. So replace the trans_mutex with a trans_lock spinlock and use it to do the following 1) Protect fs_info->running_transaction. All trans handles have to do is check this, and then take a reference of the transaction and keep on going. 2) Protect the fs_info->trans_list. This doesn't get used too much, basically it just holds the current transactions, which will usually just be the currently committing transaction and the currently running transaction at most. 3) Protect the dead roots list. This is only ever processed by splicing the list so this is relatively simple. 4) Protect the fs_info->reloc_ctl stuff. This is very lightweight and was using the trans_mutex before, so this is a pretty straightforward change. 5) Protect fs_info->no_trans_join. Because we don't hold the trans_lock over the entirety of the commit we need to have a way to block new people from creating a new transaction while we're doing our work. So we set no_trans_join and in join_transaction we test to see if that is set, and if it is we do a wait_on_commit. 6) Make the transaction use count atomic so we don't need to take locks to modify it when we're dropping references. 7) Add a commit_lock to the transaction to make sure multiple people trying to commit the same transaction don't race and commit at the same time. 8) Make open_ioctl_trans an atomic so we don't have to take any locks for ioctl trans. I have tested this with xfstests, but obviously it is a pretty hairy change so lots of testing is greatly appreciated. Thanks, Signed-off-by: Josef Bacik <josef@redhat.com>
2011-04-12 05:25:13 +08:00
spin_unlock(&fs_info->fs_roots_radix_lock);
return 0;
}
/*
* defrag a given btree.
* Every leaf in the btree is read and defragged.
*/
int btrfs_defrag_root(struct btrfs_root *root)
{
struct btrfs_fs_info *info = root->fs_info;
struct btrfs_trans_handle *trans;
int ret;
if (test_and_set_bit(BTRFS_ROOT_DEFRAG_RUNNING, &root->state))
return 0;
while (1) {
trans = btrfs_start_transaction(root, 0);
if (IS_ERR(trans)) {
ret = PTR_ERR(trans);
break;
}
ret = btrfs_defrag_leaves(trans, root);
btrfs_end_transaction(trans);
btrfs_btree_balance_dirty(info);
cond_resched();
if (btrfs_fs_closing(info) || ret != -EAGAIN)
break;
if (btrfs_defrag_cancelled(info)) {
btrfs_debug(info, "defrag_root cancelled");
ret = -EAGAIN;
break;
}
}
clear_bit(BTRFS_ROOT_DEFRAG_RUNNING, &root->state);
return ret;
}
btrfs: qgroup: Fix qgroup accounting when creating snapshot Current btrfs qgroup design implies a requirement that after calling btrfs_qgroup_account_extents() there must be a commit root switch. Normally this is OK, as btrfs_qgroup_accounting_extents() is only called inside btrfs_commit_transaction() just be commit_cowonly_roots(). However there is a exception at create_pending_snapshot(), which will call btrfs_qgroup_account_extents() but no any commit root switch. In case of creating a snapshot whose parent root is itself (create a snapshot of fs tree), it will corrupt qgroup by the following trace: (skipped unrelated data) ====== btrfs_qgroup_account_extent: bytenr = 29786112, num_bytes = 16384, nr_old_roots = 0, nr_new_roots = 1 qgroup_update_counters: qgid = 5, cur_old_count = 0, cur_new_count = 1, rfer = 0, excl = 0 qgroup_update_counters: qgid = 5, cur_old_count = 0, cur_new_count = 1, rfer = 16384, excl = 16384 btrfs_qgroup_account_extent: bytenr = 29786112, num_bytes = 16384, nr_old_roots = 0, nr_new_roots = 0 ====== The problem here is in first qgroup_account_extent(), the nr_new_roots of the extent is 1, which means its reference got increased, and qgroup increased its rfer and excl. But at second qgroup_account_extent(), its reference got decreased, but between these two qgroup_account_extent(), there is no switch roots. This leads to the same nr_old_roots, and this extent just got ignored by qgroup, which means this extent is wrongly accounted. Fix it by call commit_cowonly_roots() after qgroup_account_extent() in create_pending_snapshot(), with needed preparation. Mark: I added a check at the top of qgroup_account_snapshot() to skip this code if qgroups are turned off. xfstest btrfs/122 exposes this problem. Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com> Reviewed-by: Josef Bacik <jbacik@fb.com> Signed-off-by: Mark Fasheh <mfasheh@suse.de> Signed-off-by: David Sterba <dsterba@suse.com>
2016-05-12 03:53:52 +08:00
/*
* Do all special snapshot related qgroup dirty hack.
*
* Will do all needed qgroup inherit and dirty hack like switch commit
* roots inside one transaction and write all btree into disk, to make
* qgroup works.
*/
static int qgroup_account_snapshot(struct btrfs_trans_handle *trans,
struct btrfs_root *src,
struct btrfs_root *parent,
struct btrfs_qgroup_inherit *inherit,
u64 dst_objectid)
{
struct btrfs_fs_info *fs_info = src->fs_info;
int ret;
/*
* Save some performance in the case that qgroups are not
* enabled. If this check races with the ioctl, rescan will
* kick in anyway.
*/
if (!test_bit(BTRFS_FS_QUOTA_ENABLED, &fs_info->flags))
btrfs: qgroup: Fix qgroup accounting when creating snapshot Current btrfs qgroup design implies a requirement that after calling btrfs_qgroup_account_extents() there must be a commit root switch. Normally this is OK, as btrfs_qgroup_accounting_extents() is only called inside btrfs_commit_transaction() just be commit_cowonly_roots(). However there is a exception at create_pending_snapshot(), which will call btrfs_qgroup_account_extents() but no any commit root switch. In case of creating a snapshot whose parent root is itself (create a snapshot of fs tree), it will corrupt qgroup by the following trace: (skipped unrelated data) ====== btrfs_qgroup_account_extent: bytenr = 29786112, num_bytes = 16384, nr_old_roots = 0, nr_new_roots = 1 qgroup_update_counters: qgid = 5, cur_old_count = 0, cur_new_count = 1, rfer = 0, excl = 0 qgroup_update_counters: qgid = 5, cur_old_count = 0, cur_new_count = 1, rfer = 16384, excl = 16384 btrfs_qgroup_account_extent: bytenr = 29786112, num_bytes = 16384, nr_old_roots = 0, nr_new_roots = 0 ====== The problem here is in first qgroup_account_extent(), the nr_new_roots of the extent is 1, which means its reference got increased, and qgroup increased its rfer and excl. But at second qgroup_account_extent(), its reference got decreased, but between these two qgroup_account_extent(), there is no switch roots. This leads to the same nr_old_roots, and this extent just got ignored by qgroup, which means this extent is wrongly accounted. Fix it by call commit_cowonly_roots() after qgroup_account_extent() in create_pending_snapshot(), with needed preparation. Mark: I added a check at the top of qgroup_account_snapshot() to skip this code if qgroups are turned off. xfstest btrfs/122 exposes this problem. Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com> Reviewed-by: Josef Bacik <jbacik@fb.com> Signed-off-by: Mark Fasheh <mfasheh@suse.de> Signed-off-by: David Sterba <dsterba@suse.com>
2016-05-12 03:53:52 +08:00
return 0;
/*
* Ensure dirty @src will be committed. Or, after coming
* commit_fs_roots() and switch_commit_roots(), any dirty but not
* recorded root will never be updated again, causing an outdated root
* item.
*/
ret = record_root_in_trans(trans, src, 1);
if (ret)
return ret;
/*
* btrfs_qgroup_inherit relies on a consistent view of the usage for the
* src root, so we must run the delayed refs here.
*
* However this isn't particularly fool proof, because there's no
* synchronization keeping us from changing the tree after this point
* before we do the qgroup_inherit, or even from making changes while
* we're doing the qgroup_inherit. But that's a problem for the future,
* for now flush the delayed refs to narrow the race window where the
* qgroup counters could end up wrong.
*/
ret = btrfs_run_delayed_refs(trans, (unsigned long)-1);
if (ret) {
btrfs_abort_transaction(trans, ret);
return ret;
}
ret = commit_fs_roots(trans);
btrfs: qgroup: Fix qgroup accounting when creating snapshot Current btrfs qgroup design implies a requirement that after calling btrfs_qgroup_account_extents() there must be a commit root switch. Normally this is OK, as btrfs_qgroup_accounting_extents() is only called inside btrfs_commit_transaction() just be commit_cowonly_roots(). However there is a exception at create_pending_snapshot(), which will call btrfs_qgroup_account_extents() but no any commit root switch. In case of creating a snapshot whose parent root is itself (create a snapshot of fs tree), it will corrupt qgroup by the following trace: (skipped unrelated data) ====== btrfs_qgroup_account_extent: bytenr = 29786112, num_bytes = 16384, nr_old_roots = 0, nr_new_roots = 1 qgroup_update_counters: qgid = 5, cur_old_count = 0, cur_new_count = 1, rfer = 0, excl = 0 qgroup_update_counters: qgid = 5, cur_old_count = 0, cur_new_count = 1, rfer = 16384, excl = 16384 btrfs_qgroup_account_extent: bytenr = 29786112, num_bytes = 16384, nr_old_roots = 0, nr_new_roots = 0 ====== The problem here is in first qgroup_account_extent(), the nr_new_roots of the extent is 1, which means its reference got increased, and qgroup increased its rfer and excl. But at second qgroup_account_extent(), its reference got decreased, but between these two qgroup_account_extent(), there is no switch roots. This leads to the same nr_old_roots, and this extent just got ignored by qgroup, which means this extent is wrongly accounted. Fix it by call commit_cowonly_roots() after qgroup_account_extent() in create_pending_snapshot(), with needed preparation. Mark: I added a check at the top of qgroup_account_snapshot() to skip this code if qgroups are turned off. xfstest btrfs/122 exposes this problem. Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com> Reviewed-by: Josef Bacik <jbacik@fb.com> Signed-off-by: Mark Fasheh <mfasheh@suse.de> Signed-off-by: David Sterba <dsterba@suse.com>
2016-05-12 03:53:52 +08:00
if (ret)
goto out;
ret = btrfs_qgroup_account_extents(trans);
btrfs: qgroup: Fix qgroup accounting when creating snapshot Current btrfs qgroup design implies a requirement that after calling btrfs_qgroup_account_extents() there must be a commit root switch. Normally this is OK, as btrfs_qgroup_accounting_extents() is only called inside btrfs_commit_transaction() just be commit_cowonly_roots(). However there is a exception at create_pending_snapshot(), which will call btrfs_qgroup_account_extents() but no any commit root switch. In case of creating a snapshot whose parent root is itself (create a snapshot of fs tree), it will corrupt qgroup by the following trace: (skipped unrelated data) ====== btrfs_qgroup_account_extent: bytenr = 29786112, num_bytes = 16384, nr_old_roots = 0, nr_new_roots = 1 qgroup_update_counters: qgid = 5, cur_old_count = 0, cur_new_count = 1, rfer = 0, excl = 0 qgroup_update_counters: qgid = 5, cur_old_count = 0, cur_new_count = 1, rfer = 16384, excl = 16384 btrfs_qgroup_account_extent: bytenr = 29786112, num_bytes = 16384, nr_old_roots = 0, nr_new_roots = 0 ====== The problem here is in first qgroup_account_extent(), the nr_new_roots of the extent is 1, which means its reference got increased, and qgroup increased its rfer and excl. But at second qgroup_account_extent(), its reference got decreased, but between these two qgroup_account_extent(), there is no switch roots. This leads to the same nr_old_roots, and this extent just got ignored by qgroup, which means this extent is wrongly accounted. Fix it by call commit_cowonly_roots() after qgroup_account_extent() in create_pending_snapshot(), with needed preparation. Mark: I added a check at the top of qgroup_account_snapshot() to skip this code if qgroups are turned off. xfstest btrfs/122 exposes this problem. Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com> Reviewed-by: Josef Bacik <jbacik@fb.com> Signed-off-by: Mark Fasheh <mfasheh@suse.de> Signed-off-by: David Sterba <dsterba@suse.com>
2016-05-12 03:53:52 +08:00
if (ret < 0)
goto out;
/* Now qgroup are all updated, we can inherit it to new qgroups */
ret = btrfs_qgroup_inherit(trans, src->root_key.objectid, dst_objectid,
btrfs: qgroup: Fix qgroup accounting when creating snapshot Current btrfs qgroup design implies a requirement that after calling btrfs_qgroup_account_extents() there must be a commit root switch. Normally this is OK, as btrfs_qgroup_accounting_extents() is only called inside btrfs_commit_transaction() just be commit_cowonly_roots(). However there is a exception at create_pending_snapshot(), which will call btrfs_qgroup_account_extents() but no any commit root switch. In case of creating a snapshot whose parent root is itself (create a snapshot of fs tree), it will corrupt qgroup by the following trace: (skipped unrelated data) ====== btrfs_qgroup_account_extent: bytenr = 29786112, num_bytes = 16384, nr_old_roots = 0, nr_new_roots = 1 qgroup_update_counters: qgid = 5, cur_old_count = 0, cur_new_count = 1, rfer = 0, excl = 0 qgroup_update_counters: qgid = 5, cur_old_count = 0, cur_new_count = 1, rfer = 16384, excl = 16384 btrfs_qgroup_account_extent: bytenr = 29786112, num_bytes = 16384, nr_old_roots = 0, nr_new_roots = 0 ====== The problem here is in first qgroup_account_extent(), the nr_new_roots of the extent is 1, which means its reference got increased, and qgroup increased its rfer and excl. But at second qgroup_account_extent(), its reference got decreased, but between these two qgroup_account_extent(), there is no switch roots. This leads to the same nr_old_roots, and this extent just got ignored by qgroup, which means this extent is wrongly accounted. Fix it by call commit_cowonly_roots() after qgroup_account_extent() in create_pending_snapshot(), with needed preparation. Mark: I added a check at the top of qgroup_account_snapshot() to skip this code if qgroups are turned off. xfstest btrfs/122 exposes this problem. Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com> Reviewed-by: Josef Bacik <jbacik@fb.com> Signed-off-by: Mark Fasheh <mfasheh@suse.de> Signed-off-by: David Sterba <dsterba@suse.com>
2016-05-12 03:53:52 +08:00
inherit);
if (ret < 0)
goto out;
/*
* Now we do a simplified commit transaction, which will:
* 1) commit all subvolume and extent tree
* To ensure all subvolume and extent tree have a valid
* commit_root to accounting later insert_dir_item()
* 2) write all btree blocks onto disk
* This is to make sure later btree modification will be cowed
* Or commit_root can be populated and cause wrong qgroup numbers
* In this simplified commit, we don't really care about other trees
* like chunk and root tree, as they won't affect qgroup.
* And we don't write super to avoid half committed status.
*/
ret = commit_cowonly_roots(trans);
btrfs: qgroup: Fix qgroup accounting when creating snapshot Current btrfs qgroup design implies a requirement that after calling btrfs_qgroup_account_extents() there must be a commit root switch. Normally this is OK, as btrfs_qgroup_accounting_extents() is only called inside btrfs_commit_transaction() just be commit_cowonly_roots(). However there is a exception at create_pending_snapshot(), which will call btrfs_qgroup_account_extents() but no any commit root switch. In case of creating a snapshot whose parent root is itself (create a snapshot of fs tree), it will corrupt qgroup by the following trace: (skipped unrelated data) ====== btrfs_qgroup_account_extent: bytenr = 29786112, num_bytes = 16384, nr_old_roots = 0, nr_new_roots = 1 qgroup_update_counters: qgid = 5, cur_old_count = 0, cur_new_count = 1, rfer = 0, excl = 0 qgroup_update_counters: qgid = 5, cur_old_count = 0, cur_new_count = 1, rfer = 16384, excl = 16384 btrfs_qgroup_account_extent: bytenr = 29786112, num_bytes = 16384, nr_old_roots = 0, nr_new_roots = 0 ====== The problem here is in first qgroup_account_extent(), the nr_new_roots of the extent is 1, which means its reference got increased, and qgroup increased its rfer and excl. But at second qgroup_account_extent(), its reference got decreased, but between these two qgroup_account_extent(), there is no switch roots. This leads to the same nr_old_roots, and this extent just got ignored by qgroup, which means this extent is wrongly accounted. Fix it by call commit_cowonly_roots() after qgroup_account_extent() in create_pending_snapshot(), with needed preparation. Mark: I added a check at the top of qgroup_account_snapshot() to skip this code if qgroups are turned off. xfstest btrfs/122 exposes this problem. Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com> Reviewed-by: Josef Bacik <jbacik@fb.com> Signed-off-by: Mark Fasheh <mfasheh@suse.de> Signed-off-by: David Sterba <dsterba@suse.com>
2016-05-12 03:53:52 +08:00
if (ret)
goto out;
switch_commit_roots(trans);
ret = btrfs_write_and_wait_transaction(trans);
btrfs: qgroup: Fix qgroup accounting when creating snapshot Current btrfs qgroup design implies a requirement that after calling btrfs_qgroup_account_extents() there must be a commit root switch. Normally this is OK, as btrfs_qgroup_accounting_extents() is only called inside btrfs_commit_transaction() just be commit_cowonly_roots(). However there is a exception at create_pending_snapshot(), which will call btrfs_qgroup_account_extents() but no any commit root switch. In case of creating a snapshot whose parent root is itself (create a snapshot of fs tree), it will corrupt qgroup by the following trace: (skipped unrelated data) ====== btrfs_qgroup_account_extent: bytenr = 29786112, num_bytes = 16384, nr_old_roots = 0, nr_new_roots = 1 qgroup_update_counters: qgid = 5, cur_old_count = 0, cur_new_count = 1, rfer = 0, excl = 0 qgroup_update_counters: qgid = 5, cur_old_count = 0, cur_new_count = 1, rfer = 16384, excl = 16384 btrfs_qgroup_account_extent: bytenr = 29786112, num_bytes = 16384, nr_old_roots = 0, nr_new_roots = 0 ====== The problem here is in first qgroup_account_extent(), the nr_new_roots of the extent is 1, which means its reference got increased, and qgroup increased its rfer and excl. But at second qgroup_account_extent(), its reference got decreased, but between these two qgroup_account_extent(), there is no switch roots. This leads to the same nr_old_roots, and this extent just got ignored by qgroup, which means this extent is wrongly accounted. Fix it by call commit_cowonly_roots() after qgroup_account_extent() in create_pending_snapshot(), with needed preparation. Mark: I added a check at the top of qgroup_account_snapshot() to skip this code if qgroups are turned off. xfstest btrfs/122 exposes this problem. Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com> Reviewed-by: Josef Bacik <jbacik@fb.com> Signed-off-by: Mark Fasheh <mfasheh@suse.de> Signed-off-by: David Sterba <dsterba@suse.com>
2016-05-12 03:53:52 +08:00
if (ret)
btrfs_handle_fs_error(fs_info, ret,
btrfs: qgroup: Fix qgroup accounting when creating snapshot Current btrfs qgroup design implies a requirement that after calling btrfs_qgroup_account_extents() there must be a commit root switch. Normally this is OK, as btrfs_qgroup_accounting_extents() is only called inside btrfs_commit_transaction() just be commit_cowonly_roots(). However there is a exception at create_pending_snapshot(), which will call btrfs_qgroup_account_extents() but no any commit root switch. In case of creating a snapshot whose parent root is itself (create a snapshot of fs tree), it will corrupt qgroup by the following trace: (skipped unrelated data) ====== btrfs_qgroup_account_extent: bytenr = 29786112, num_bytes = 16384, nr_old_roots = 0, nr_new_roots = 1 qgroup_update_counters: qgid = 5, cur_old_count = 0, cur_new_count = 1, rfer = 0, excl = 0 qgroup_update_counters: qgid = 5, cur_old_count = 0, cur_new_count = 1, rfer = 16384, excl = 16384 btrfs_qgroup_account_extent: bytenr = 29786112, num_bytes = 16384, nr_old_roots = 0, nr_new_roots = 0 ====== The problem here is in first qgroup_account_extent(), the nr_new_roots of the extent is 1, which means its reference got increased, and qgroup increased its rfer and excl. But at second qgroup_account_extent(), its reference got decreased, but between these two qgroup_account_extent(), there is no switch roots. This leads to the same nr_old_roots, and this extent just got ignored by qgroup, which means this extent is wrongly accounted. Fix it by call commit_cowonly_roots() after qgroup_account_extent() in create_pending_snapshot(), with needed preparation. Mark: I added a check at the top of qgroup_account_snapshot() to skip this code if qgroups are turned off. xfstest btrfs/122 exposes this problem. Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com> Reviewed-by: Josef Bacik <jbacik@fb.com> Signed-off-by: Mark Fasheh <mfasheh@suse.de> Signed-off-by: David Sterba <dsterba@suse.com>
2016-05-12 03:53:52 +08:00
"Error while writing out transaction for qgroup");
out:
/*
* Force parent root to be updated, as we recorded it before so its
* last_trans == cur_transid.
* Or it won't be committed again onto disk after later
* insert_dir_item()
*/
if (!ret)
ret = record_root_in_trans(trans, parent, 1);
btrfs: qgroup: Fix qgroup accounting when creating snapshot Current btrfs qgroup design implies a requirement that after calling btrfs_qgroup_account_extents() there must be a commit root switch. Normally this is OK, as btrfs_qgroup_accounting_extents() is only called inside btrfs_commit_transaction() just be commit_cowonly_roots(). However there is a exception at create_pending_snapshot(), which will call btrfs_qgroup_account_extents() but no any commit root switch. In case of creating a snapshot whose parent root is itself (create a snapshot of fs tree), it will corrupt qgroup by the following trace: (skipped unrelated data) ====== btrfs_qgroup_account_extent: bytenr = 29786112, num_bytes = 16384, nr_old_roots = 0, nr_new_roots = 1 qgroup_update_counters: qgid = 5, cur_old_count = 0, cur_new_count = 1, rfer = 0, excl = 0 qgroup_update_counters: qgid = 5, cur_old_count = 0, cur_new_count = 1, rfer = 16384, excl = 16384 btrfs_qgroup_account_extent: bytenr = 29786112, num_bytes = 16384, nr_old_roots = 0, nr_new_roots = 0 ====== The problem here is in first qgroup_account_extent(), the nr_new_roots of the extent is 1, which means its reference got increased, and qgroup increased its rfer and excl. But at second qgroup_account_extent(), its reference got decreased, but between these two qgroup_account_extent(), there is no switch roots. This leads to the same nr_old_roots, and this extent just got ignored by qgroup, which means this extent is wrongly accounted. Fix it by call commit_cowonly_roots() after qgroup_account_extent() in create_pending_snapshot(), with needed preparation. Mark: I added a check at the top of qgroup_account_snapshot() to skip this code if qgroups are turned off. xfstest btrfs/122 exposes this problem. Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com> Reviewed-by: Josef Bacik <jbacik@fb.com> Signed-off-by: Mark Fasheh <mfasheh@suse.de> Signed-off-by: David Sterba <dsterba@suse.com>
2016-05-12 03:53:52 +08:00
return ret;
}
/*
* new snapshots need to be created at a very specific time in the
* transaction commit. This does the actual creation.
*
* Note:
* If the error which may affect the commitment of the current transaction
* happens, we should return the error number. If the error which just affect
* the creation of the pending snapshots, just return 0.
*/
static noinline int create_pending_snapshot(struct btrfs_trans_handle *trans,
struct btrfs_pending_snapshot *pending)
{
struct btrfs_fs_info *fs_info = trans->fs_info;
struct btrfs_key key;
struct btrfs_root_item *new_root_item;
struct btrfs_root *tree_root = fs_info->tree_root;
struct btrfs_root *root = pending->root;
struct btrfs_root *parent_root;
struct btrfs_block_rsv *rsv;
struct inode *parent_inode;
struct btrfs_path *path;
struct btrfs_dir_item *dir_item;
struct dentry *dentry;
struct extent_buffer *tmp;
struct extent_buffer *old;
vfs: change inode times to use struct timespec64 struct timespec is not y2038 safe. Transition vfs to use y2038 safe struct timespec64 instead. The change was made with the help of the following cocinelle script. This catches about 80% of the changes. All the header file and logic changes are included in the first 5 rules. The rest are trivial substitutions. I avoid changing any of the function signatures or any other filesystem specific data structures to keep the patch simple for review. The script can be a little shorter by combining different cases. But, this version was sufficient for my usecase. virtual patch @ depends on patch @ identifier now; @@ - struct timespec + struct timespec64 current_time ( ... ) { - struct timespec now = current_kernel_time(); + struct timespec64 now = current_kernel_time64(); ... - return timespec_trunc( + return timespec64_trunc( ... ); } @ depends on patch @ identifier xtime; @@ struct \( iattr \| inode \| kstat \) { ... - struct timespec xtime; + struct timespec64 xtime; ... } @ depends on patch @ identifier t; @@ struct inode_operations { ... int (*update_time) (..., - struct timespec t, + struct timespec64 t, ...); ... } @ depends on patch @ identifier t; identifier fn_update_time =~ "update_time$"; @@ fn_update_time (..., - struct timespec *t, + struct timespec64 *t, ...) { ... } @ depends on patch @ identifier t; @@ lease_get_mtime( ... , - struct timespec *t + struct timespec64 *t ) { ... } @te depends on patch forall@ identifier ts; local idexpression struct inode *inode_node; identifier i_xtime =~ "^i_[acm]time$"; identifier ia_xtime =~ "^ia_[acm]time$"; identifier fn_update_time =~ "update_time$"; identifier fn; expression e, E3; local idexpression struct inode *node1; local idexpression struct inode *node2; local idexpression struct iattr *attr1; local idexpression struct iattr *attr2; local idexpression struct iattr attr; identifier i_xtime1 =~ "^i_[acm]time$"; identifier i_xtime2 =~ "^i_[acm]time$"; identifier ia_xtime1 =~ "^ia_[acm]time$"; identifier ia_xtime2 =~ "^ia_[acm]time$"; @@ ( ( - struct timespec ts; + struct timespec64 ts; | - struct timespec ts = current_time(inode_node); + struct timespec64 ts = current_time(inode_node); ) <+... when != ts ( - timespec_equal(&inode_node->i_xtime, &ts) + timespec64_equal(&inode_node->i_xtime, &ts) | - timespec_equal(&ts, &inode_node->i_xtime) + timespec64_equal(&ts, &inode_node->i_xtime) | - timespec_compare(&inode_node->i_xtime, &ts) + timespec64_compare(&inode_node->i_xtime, &ts) | - timespec_compare(&ts, &inode_node->i_xtime) + timespec64_compare(&ts, &inode_node->i_xtime) | ts = current_time(e) | fn_update_time(..., &ts,...) | inode_node->i_xtime = ts | node1->i_xtime = ts | ts = inode_node->i_xtime | <+... attr1->ia_xtime ...+> = ts | ts = attr1->ia_xtime | ts.tv_sec | ts.tv_nsec | btrfs_set_stack_timespec_sec(..., ts.tv_sec) | btrfs_set_stack_timespec_nsec(..., ts.tv_nsec) | - ts = timespec64_to_timespec( + ts = ... -) | - ts = ktime_to_timespec( + ts = ktime_to_timespec64( ...) | - ts = E3 + ts = timespec_to_timespec64(E3) | - ktime_get_real_ts(&ts) + ktime_get_real_ts64(&ts) | fn(..., - ts + timespec64_to_timespec(ts) ,...) ) ...+> ( <... when != ts - return ts; + return timespec64_to_timespec(ts); ...> ) | - timespec_equal(&node1->i_xtime1, &node2->i_xtime2) + timespec64_equal(&node1->i_xtime2, &node2->i_xtime2) | - timespec_equal(&node1->i_xtime1, &attr2->ia_xtime2) + timespec64_equal(&node1->i_xtime2, &attr2->ia_xtime2) | - timespec_compare(&node1->i_xtime1, &node2->i_xtime2) + timespec64_compare(&node1->i_xtime1, &node2->i_xtime2) | node1->i_xtime1 = - timespec_trunc(attr1->ia_xtime1, + timespec64_trunc(attr1->ia_xtime1, ...) | - attr1->ia_xtime1 = timespec_trunc(attr2->ia_xtime2, + attr1->ia_xtime1 = timespec64_trunc(attr2->ia_xtime2, ...) | - ktime_get_real_ts(&attr1->ia_xtime1) + ktime_get_real_ts64(&attr1->ia_xtime1) | - ktime_get_real_ts(&attr.ia_xtime1) + ktime_get_real_ts64(&attr.ia_xtime1) ) @ depends on patch @ struct inode *node; struct iattr *attr; identifier fn; identifier i_xtime =~ "^i_[acm]time$"; identifier ia_xtime =~ "^ia_[acm]time$"; expression e; @@ ( - fn(node->i_xtime); + fn(timespec64_to_timespec(node->i_xtime)); | fn(..., - node->i_xtime); + timespec64_to_timespec(node->i_xtime)); | - e = fn(attr->ia_xtime); + e = fn(timespec64_to_timespec(attr->ia_xtime)); ) @ depends on patch forall @ struct inode *node; struct iattr *attr; identifier i_xtime =~ "^i_[acm]time$"; identifier ia_xtime =~ "^ia_[acm]time$"; identifier fn; @@ { + struct timespec ts; <+... ( + ts = timespec64_to_timespec(node->i_xtime); fn (..., - &node->i_xtime, + &ts, ...); | + ts = timespec64_to_timespec(attr->ia_xtime); fn (..., - &attr->ia_xtime, + &ts, ...); ) ...+> } @ depends on patch forall @ struct inode *node; struct iattr *attr; struct kstat *stat; identifier ia_xtime =~ "^ia_[acm]time$"; identifier i_xtime =~ "^i_[acm]time$"; identifier xtime =~ "^[acm]time$"; identifier fn, ret; @@ { + struct timespec ts; <+... ( + ts = timespec64_to_timespec(node->i_xtime); ret = fn (..., - &node->i_xtime, + &ts, ...); | + ts = timespec64_to_timespec(node->i_xtime); ret = fn (..., - &node->i_xtime); + &ts); | + ts = timespec64_to_timespec(attr->ia_xtime); ret = fn (..., - &attr->ia_xtime, + &ts, ...); | + ts = timespec64_to_timespec(attr->ia_xtime); ret = fn (..., - &attr->ia_xtime); + &ts); | + ts = timespec64_to_timespec(stat->xtime); ret = fn (..., - &stat->xtime); + &ts); ) ...+> } @ depends on patch @ struct inode *node; struct inode *node2; identifier i_xtime1 =~ "^i_[acm]time$"; identifier i_xtime2 =~ "^i_[acm]time$"; identifier i_xtime3 =~ "^i_[acm]time$"; struct iattr *attrp; struct iattr *attrp2; struct iattr attr ; identifier ia_xtime1 =~ "^ia_[acm]time$"; identifier ia_xtime2 =~ "^ia_[acm]time$"; struct kstat *stat; struct kstat stat1; struct timespec64 ts; identifier xtime =~ "^[acmb]time$"; expression e; @@ ( ( node->i_xtime2 \| attrp->ia_xtime2 \| attr.ia_xtime2 \) = node->i_xtime1 ; | node->i_xtime2 = \( node2->i_xtime1 \| timespec64_trunc(...) \); | node->i_xtime2 = node->i_xtime1 = node->i_xtime3 = \(ts \| current_time(...) \); | node->i_xtime1 = node->i_xtime3 = \(ts \| current_time(...) \); | stat->xtime = node2->i_xtime1; | stat1.xtime = node2->i_xtime1; | ( node->i_xtime2 \| attrp->ia_xtime2 \) = attrp->ia_xtime1 ; | ( attrp->ia_xtime1 \| attr.ia_xtime1 \) = attrp2->ia_xtime2; | - e = node->i_xtime1; + e = timespec64_to_timespec( node->i_xtime1 ); | - e = attrp->ia_xtime1; + e = timespec64_to_timespec( attrp->ia_xtime1 ); | node->i_xtime1 = current_time(...); | node->i_xtime2 = node->i_xtime1 = node->i_xtime3 = - e; + timespec_to_timespec64(e); | node->i_xtime1 = node->i_xtime3 = - e; + timespec_to_timespec64(e); | - node->i_xtime1 = e; + node->i_xtime1 = timespec_to_timespec64(e); ) Signed-off-by: Deepa Dinamani <deepa.kernel@gmail.com> Cc: <anton@tuxera.com> Cc: <balbi@kernel.org> Cc: <bfields@fieldses.org> Cc: <darrick.wong@oracle.com> Cc: <dhowells@redhat.com> Cc: <dsterba@suse.com> Cc: <dwmw2@infradead.org> Cc: <hch@lst.de> Cc: <hirofumi@mail.parknet.co.jp> Cc: <hubcap@omnibond.com> Cc: <jack@suse.com> Cc: <jaegeuk@kernel.org> Cc: <jaharkes@cs.cmu.edu> Cc: <jslaby@suse.com> Cc: <keescook@chromium.org> Cc: <mark@fasheh.com> Cc: <miklos@szeredi.hu> Cc: <nico@linaro.org> Cc: <reiserfs-devel@vger.kernel.org> Cc: <richard@nod.at> Cc: <sage@redhat.com> Cc: <sfrench@samba.org> Cc: <swhiteho@redhat.com> Cc: <tj@kernel.org> Cc: <trond.myklebust@primarydata.com> Cc: <tytso@mit.edu> Cc: <viro@zeniv.linux.org.uk>
2018-05-09 10:36:02 +08:00
struct timespec64 cur_time;
int ret = 0;
u64 to_reserve = 0;
u64 index = 0;
u64 objectid;
u64 root_flags;
ASSERT(pending->path);
path = pending->path;
ASSERT(pending->root_item);
new_root_item = pending->root_item;
pending->error = btrfs_get_free_objectid(tree_root, &objectid);
if (pending->error)
goto no_free_objectid;
/*
* Make qgroup to skip current new snapshot's qgroupid, as it is
* accounted by later btrfs_qgroup_inherit().
*/
btrfs_set_skip_qgroup(trans, objectid);
btrfs_reloc_pre_snapshot(pending, &to_reserve);
if (to_reserve > 0) {
pending->error = btrfs_block_rsv_add(fs_info,
&pending->block_rsv,
to_reserve,
BTRFS_RESERVE_NO_FLUSH);
if (pending->error)
goto clear_skip_qgroup;
}
key.objectid = objectid;
key.offset = (u64)-1;
key.type = BTRFS_ROOT_ITEM_KEY;
rsv = trans->block_rsv;
trans->block_rsv = &pending->block_rsv;
trans->bytes_reserved = trans->block_rsv->reserved;
trace_btrfs_space_reservation(fs_info, "transaction",
trans->transid,
trans->bytes_reserved, 1);
dentry = pending->dentry;
parent_inode = pending->dir;
parent_root = BTRFS_I(parent_inode)->root;
ret = record_root_in_trans(trans, parent_root, 0);
if (ret)
goto fail;
cur_time = current_time(parent_inode);
/*
* insert the directory item
*/
ret = btrfs_set_inode_index(BTRFS_I(parent_inode), &index);
BUG_ON(ret); /* -ENOMEM */
/* check if there is a file/dir which has the same name. */
dir_item = btrfs_lookup_dir_item(NULL, parent_root, path,
btrfs_ino(BTRFS_I(parent_inode)),
dentry->d_name.name,
dentry->d_name.len, 0);
if (dir_item != NULL && !IS_ERR(dir_item)) {
pending->error = -EEXIST;
goto dir_item_existed;
} else if (IS_ERR(dir_item)) {
ret = PTR_ERR(dir_item);
btrfs_abort_transaction(trans, ret);
goto fail;
}
btrfs_release_path(path);
/*
* pull in the delayed directory update
* and the delayed inode item
* otherwise we corrupt the FS during
* snapshot
*/
ret = btrfs_run_delayed_items(trans);
if (ret) { /* Transaction aborted */
btrfs_abort_transaction(trans, ret);
goto fail;
}
ret = record_root_in_trans(trans, root, 0);
if (ret) {
btrfs_abort_transaction(trans, ret);
goto fail;
}
btrfs_set_root_last_snapshot(&root->root_item, trans->transid);
memcpy(new_root_item, &root->root_item, sizeof(*new_root_item));
btrfs_check_and_init_root_item(new_root_item);
root_flags = btrfs_root_flags(new_root_item);
if (pending->readonly)
root_flags |= BTRFS_ROOT_SUBVOL_RDONLY;
else
root_flags &= ~BTRFS_ROOT_SUBVOL_RDONLY;
btrfs_set_root_flags(new_root_item, root_flags);
btrfs_set_root_generation_v2(new_root_item,
trans->transid);
generate_random_guid(new_root_item->uuid);
memcpy(new_root_item->parent_uuid, root->root_item.uuid,
BTRFS_UUID_SIZE);
if (!(root_flags & BTRFS_ROOT_SUBVOL_RDONLY)) {
memset(new_root_item->received_uuid, 0,
sizeof(new_root_item->received_uuid));
memset(&new_root_item->stime, 0, sizeof(new_root_item->stime));
memset(&new_root_item->rtime, 0, sizeof(new_root_item->rtime));
btrfs_set_root_stransid(new_root_item, 0);
btrfs_set_root_rtransid(new_root_item, 0);
}
btrfs_set_stack_timespec_sec(&new_root_item->otime, cur_time.tv_sec);
btrfs_set_stack_timespec_nsec(&new_root_item->otime, cur_time.tv_nsec);
btrfs_set_root_otransid(new_root_item, trans->transid);
old = btrfs_lock_root_node(root);
ret = btrfs_cow_block(trans, root, old, NULL, 0, &old,
BTRFS_NESTING_COW);
if (ret) {
btrfs_tree_unlock(old);
free_extent_buffer(old);
btrfs_abort_transaction(trans, ret);
goto fail;
}
ret = btrfs_copy_root(trans, root, old, &tmp, objectid);
/* clean up in any case */
btrfs_tree_unlock(old);
free_extent_buffer(old);
if (ret) {
btrfs_abort_transaction(trans, ret);
goto fail;
}
/* see comments in should_cow_block() */
set_bit(BTRFS_ROOT_FORCE_COW, &root->state);
smp_wmb();
btrfs_set_root_node(new_root_item, tmp);
/* record when the snapshot was created in key.offset */
key.offset = trans->transid;
ret = btrfs_insert_root(trans, tree_root, &key, new_root_item);
btrfs_tree_unlock(tmp);
free_extent_buffer(tmp);
if (ret) {
btrfs_abort_transaction(trans, ret);
goto fail;
}
/*
* insert root back/forward references
*/
ret = btrfs_add_root_ref(trans, objectid,
parent_root->root_key.objectid,
btrfs_ino(BTRFS_I(parent_inode)), index,
dentry->d_name.name, dentry->d_name.len);
if (ret) {
btrfs_abort_transaction(trans, ret);
goto fail;
}
key.offset = (u64)-1;
btrfs: preallocate anon block device at first phase of snapshot creation [BUG] When the anonymous block device pool is exhausted, subvolume/snapshot creation fails with EMFILE (Too many files open). This has been reported by a user. The allocation happens in the second phase during transaction commit where it's only way out is to abort the transaction BTRFS: Transaction aborted (error -24) WARNING: CPU: 17 PID: 17041 at fs/btrfs/transaction.c:1576 create_pending_snapshot+0xbc4/0xd10 [btrfs] RIP: 0010:create_pending_snapshot+0xbc4/0xd10 [btrfs] Call Trace: create_pending_snapshots+0x82/0xa0 [btrfs] btrfs_commit_transaction+0x275/0x8c0 [btrfs] btrfs_mksubvol+0x4b9/0x500 [btrfs] btrfs_ioctl_snap_create_transid+0x174/0x180 [btrfs] btrfs_ioctl_snap_create_v2+0x11c/0x180 [btrfs] btrfs_ioctl+0x11a4/0x2da0 [btrfs] do_vfs_ioctl+0xa9/0x640 ksys_ioctl+0x67/0x90 __x64_sys_ioctl+0x1a/0x20 do_syscall_64+0x5a/0x110 entry_SYSCALL_64_after_hwframe+0x44/0xa9 ---[ end trace 33f2f83f3d5250e9 ]--- BTRFS: error (device sda1) in create_pending_snapshot:1576: errno=-24 unknown BTRFS info (device sda1): forced readonly BTRFS warning (device sda1): Skipping commit of aborted transaction. BTRFS: error (device sda1) in cleanup_transaction:1831: errno=-24 unknown [CAUSE] When the global anonymous block device pool is exhausted, the following call chain will fail, and lead to transaction abort: btrfs_ioctl_snap_create_v2() |- btrfs_ioctl_snap_create_transid() |- btrfs_mksubvol() |- btrfs_commit_transaction() |- create_pending_snapshot() |- btrfs_get_fs_root() |- btrfs_init_fs_root() |- get_anon_bdev() [FIX] Although we can't enlarge the anonymous block device pool, at least we can preallocate anon_dev for subvolume/snapshot in the first phase, outside of transaction context and exactly at the moment the user calls the creation ioctl. Reported-by: Greed Rong <greedrong@gmail.com> Link: https://lore.kernel.org/linux-btrfs/CA+UqX+NTrZ6boGnWHhSeZmEY5J76CTqmYjO2S+=tHJX7nb9DPw@mail.gmail.com/ CC: stable@vger.kernel.org # 4.4+ Signed-off-by: Qu Wenruo <wqu@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2020-06-16 10:17:36 +08:00
pending->snap = btrfs_get_new_fs_root(fs_info, objectid, pending->anon_dev);
if (IS_ERR(pending->snap)) {
ret = PTR_ERR(pending->snap);
btrfs: fix NULL pointer dereference after failure to create snapshot When trying to get a new fs root for a snapshot during the transaction at transaction.c:create_pending_snapshot(), if btrfs_get_new_fs_root() fails we leave "pending->snap" pointing to an error pointer, and then later at ioctl.c:create_snapshot() we dereference that pointer, resulting in a crash: [12264.614689] BUG: kernel NULL pointer dereference, address: 00000000000007c4 [12264.615650] #PF: supervisor write access in kernel mode [12264.616487] #PF: error_code(0x0002) - not-present page [12264.617436] PGD 0 P4D 0 [12264.618328] Oops: 0002 [#1] PREEMPT SMP DEBUG_PAGEALLOC PTI [12264.619150] CPU: 0 PID: 2310635 Comm: fsstress Tainted: G W 5.9.0-rc3-btrfs-next-67 #1 [12264.619960] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 [12264.621769] RIP: 0010:btrfs_mksubvol+0x438/0x4a0 [btrfs] [12264.622528] Code: bc ef ff ff (...) [12264.624092] RSP: 0018:ffffaa6fc7277cd8 EFLAGS: 00010282 [12264.624669] RAX: 00000000fffffff4 RBX: ffff9d3e8f151a60 RCX: 0000000000000000 [12264.625249] RDX: 0000000000000001 RSI: ffffffff9d56c9be RDI: fffffffffffffff4 [12264.625830] RBP: ffff9d3e8f151b48 R08: 0000000000000000 R09: 0000000000000000 [12264.626413] R10: 0000000000000000 R11: 0000000000000000 R12: 00000000fffffff4 [12264.626994] R13: ffff9d3ede380538 R14: ffff9d3ede380500 R15: ffff9d3f61b2eeb8 [12264.627582] FS: 00007f140d5d8200(0000) GS:ffff9d3fb5e00000(0000) knlGS:0000000000000000 [12264.628176] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [12264.628773] CR2: 00000000000007c4 CR3: 000000020f8e8004 CR4: 00000000003706f0 [12264.629379] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [12264.629994] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [12264.630594] Call Trace: [12264.631227] btrfs_mksnapshot+0x7b/0xb0 [btrfs] [12264.631840] __btrfs_ioctl_snap_create+0x16f/0x1a0 [btrfs] [12264.632458] btrfs_ioctl_snap_create_v2+0xb0/0xf0 [btrfs] [12264.633078] btrfs_ioctl+0x1864/0x3130 [btrfs] [12264.633689] ? do_sys_openat2+0x1a7/0x2d0 [12264.634295] ? kmem_cache_free+0x147/0x3a0 [12264.634899] ? __x64_sys_ioctl+0x83/0xb0 [12264.635488] __x64_sys_ioctl+0x83/0xb0 [12264.636058] do_syscall_64+0x33/0x80 [12264.636616] entry_SYSCALL_64_after_hwframe+0x44/0xa9 (gdb) list *(btrfs_mksubvol+0x438) 0x7c7b8 is in btrfs_mksubvol (fs/btrfs/ioctl.c:858). 853 ret = 0; 854 pending_snapshot->anon_dev = 0; 855 fail: 856 /* Prevent double freeing of anon_dev */ 857 if (ret && pending_snapshot->snap) 858 pending_snapshot->snap->anon_dev = 0; 859 btrfs_put_root(pending_snapshot->snap); 860 btrfs_subvolume_release_metadata(root, &pending_snapshot->block_rsv); 861 free_pending: 862 if (pending_snapshot->anon_dev) So fix this by setting "pending->snap" to NULL if we get an error from the call to btrfs_get_new_fs_root() at transaction.c:create_pending_snapshot(). Fixes: 2dfb1e43f57dd3 ("btrfs: preallocate anon block device at first phase of snapshot creation") Signed-off-by: Filipe Manana <fdmanana@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2020-09-05 00:22:57 +08:00
pending->snap = NULL;
btrfs_abort_transaction(trans, ret);
goto fail;
}
ret = btrfs_reloc_post_snapshot(trans, pending);
if (ret) {
btrfs_abort_transaction(trans, ret);
goto fail;
}
Btrfs: fix full backref problem when inserting shared block reference If we create several snapshots at the same time, the following BUG_ON() will be triggered. kernel BUG at fs/btrfs/extent-tree.c:6047! Steps to reproduce: # mkfs.btrfs <partition> # mount <partition> <mnt> # cd <mnt> # for ((i=0;i<2400;i++)); do touch long_name_to_make_tree_more_deep$i; done # for ((i=0; i<4; i++)) > do > mkdir $i > for ((j=0; j<200; j++)) > do > btrfs sub snap . $i/$j > done & > done The reason is: Before transaction commit, some operations changed the fs tree and new tree blocks were allocated because of COW. We used the implicit non-shared back reference for those newly allocated tree blocks because they were not shared by two or more trees. And then we created the first snapshot for the fs tree, according to the back reference rules, we also used implicit back refs for the child tree blocks of the root node of the fs tree, now those child nodes/leaves were shared by two trees. Then We didn't deal with the delayed references, and continued to change the fs tree(created the second snapshot and inserted the dir item of the new snapshot into the fs tree). According to the rules of the back reference, we added full back refs for those tree blocks whose parents have be shared by two trees. Now some newly allocated tree blocks had two types of the references. As we know, the delayed reference system handles these delayed references from back to front, and the full delayed reference is inserted after the implicit ones. So when we dealt with the back references of those newly allocated tree blocks, the full references was dealt with at first. And if the first reference is a shared back reference and the tree block that the reference points to is newly allocated, It would be considered as a tree block which is shared by two or more trees when it is allocated and should be a full back reference not a implicit one, the flag of its reference also should be set to FULL_BACKREF. But in fact, it was a non-shared tree block with a implicit reference at beginning, so it was not compulsory to set the flags to FULL_BACKREF. So BUG_ON was triggered. We have several methods to fix this bug: 1. deal with delayed references after the snapshot is created and before we change the source tree of the snapshot. This is the easiest and safest way. 2. modify the sort method of the delayed reference tree, make the full delayed references be inserted before the implicit ones. It is also very easy, but I don't know if it will introduce some problems or not. 3. modify select_delayed_ref() and make it select the implicit delayed reference at first. This way is not so good because it may wastes CPU time if we have lots of delayed references. 4. set the flags to FULL_BACKREF, this method is a little complex comparing with the 1st way. I chose the 1st way to fix it. Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
2012-09-06 18:00:57 +08:00
btrfs: qgroup: Fix qgroup accounting when creating snapshot Current btrfs qgroup design implies a requirement that after calling btrfs_qgroup_account_extents() there must be a commit root switch. Normally this is OK, as btrfs_qgroup_accounting_extents() is only called inside btrfs_commit_transaction() just be commit_cowonly_roots(). However there is a exception at create_pending_snapshot(), which will call btrfs_qgroup_account_extents() but no any commit root switch. In case of creating a snapshot whose parent root is itself (create a snapshot of fs tree), it will corrupt qgroup by the following trace: (skipped unrelated data) ====== btrfs_qgroup_account_extent: bytenr = 29786112, num_bytes = 16384, nr_old_roots = 0, nr_new_roots = 1 qgroup_update_counters: qgid = 5, cur_old_count = 0, cur_new_count = 1, rfer = 0, excl = 0 qgroup_update_counters: qgid = 5, cur_old_count = 0, cur_new_count = 1, rfer = 16384, excl = 16384 btrfs_qgroup_account_extent: bytenr = 29786112, num_bytes = 16384, nr_old_roots = 0, nr_new_roots = 0 ====== The problem here is in first qgroup_account_extent(), the nr_new_roots of the extent is 1, which means its reference got increased, and qgroup increased its rfer and excl. But at second qgroup_account_extent(), its reference got decreased, but between these two qgroup_account_extent(), there is no switch roots. This leads to the same nr_old_roots, and this extent just got ignored by qgroup, which means this extent is wrongly accounted. Fix it by call commit_cowonly_roots() after qgroup_account_extent() in create_pending_snapshot(), with needed preparation. Mark: I added a check at the top of qgroup_account_snapshot() to skip this code if qgroups are turned off. xfstest btrfs/122 exposes this problem. Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com> Reviewed-by: Josef Bacik <jbacik@fb.com> Signed-off-by: Mark Fasheh <mfasheh@suse.de> Signed-off-by: David Sterba <dsterba@suse.com>
2016-05-12 03:53:52 +08:00
/*
* Do special qgroup accounting for snapshot, as we do some qgroup
* snapshot hack to do fast snapshot.
* To co-operate with that hack, we do hack again.
* Or snapshot will be greatly slowed down by a subtree qgroup rescan
*/
ret = qgroup_account_snapshot(trans, root, parent_root,
pending->inherit, objectid);
if (ret < 0)
goto fail;
ret = btrfs_insert_dir_item(trans, dentry->d_name.name,
dentry->d_name.len, BTRFS_I(parent_inode),
&key, BTRFS_FT_DIR, index);
/* We have check then name at the beginning, so it is impossible. */
BUG_ON(ret == -EEXIST || ret == -EOVERFLOW);
if (ret) {
btrfs_abort_transaction(trans, ret);
goto fail;
}
btrfs_i_size_write(BTRFS_I(parent_inode), parent_inode->i_size +
dentry->d_name.len * 2);
parent_inode->i_mtime = parent_inode->i_ctime =
current_time(parent_inode);
ret = btrfs_update_inode_fallback(trans, parent_root, BTRFS_I(parent_inode));
if (ret) {
btrfs_abort_transaction(trans, ret);
goto fail;
}
ret = btrfs_uuid_tree_add(trans, new_root_item->uuid,
BTRFS_UUID_KEY_SUBVOL,
objectid);
if (ret) {
btrfs_abort_transaction(trans, ret);
goto fail;
}
if (!btrfs_is_empty_uuid(new_root_item->received_uuid)) {
ret = btrfs_uuid_tree_add(trans, new_root_item->received_uuid,
BTRFS_UUID_KEY_RECEIVED_SUBVOL,
objectid);
if (ret && ret != -EEXIST) {
btrfs_abort_transaction(trans, ret);
goto fail;
}
}
fail:
pending->error = ret;
dir_item_existed:
trans->block_rsv = rsv;
trans->bytes_reserved = 0;
clear_skip_qgroup:
btrfs_clear_skip_qgroup(trans);
no_free_objectid:
kfree(new_root_item);
pending->root_item = NULL;
btrfs_free_path(path);
pending->path = NULL;
return ret;
}
/*
* create all the snapshots we've scheduled for creation
*/
static noinline int create_pending_snapshots(struct btrfs_trans_handle *trans)
{
struct btrfs_pending_snapshot *pending, *next;
struct list_head *head = &trans->transaction->pending_snapshots;
int ret = 0;
list_for_each_entry_safe(pending, next, head, list) {
list_del(&pending->list);
ret = create_pending_snapshot(trans, pending);
if (ret)
break;
}
return ret;
}
static void update_super_roots(struct btrfs_fs_info *fs_info)
Btrfs: Mixed back reference (FORWARD ROLLING FORMAT CHANGE) This commit introduces a new kind of back reference for btrfs metadata. Once a filesystem has been mounted with this commit, IT WILL NO LONGER BE MOUNTABLE BY OLDER KERNELS. When a tree block in subvolume tree is cow'd, the reference counts of all extents it points to are increased by one. At transaction commit time, the old root of the subvolume is recorded in a "dead root" data structure, and the btree it points to is later walked, dropping reference counts and freeing any blocks where the reference count goes to 0. The increments done during cow and decrements done after commit cancel out, and the walk is a very expensive way to go about freeing the blocks that are no longer referenced by the new btree root. This commit reduces the transaction overhead by avoiding the need for dead root records. When a non-shared tree block is cow'd, we free the old block at once, and the new block inherits old block's references. When a tree block with reference count > 1 is cow'd, we increase the reference counts of all extents the new block points to by one, and decrease the old block's reference count by one. This dead tree avoidance code removes the need to modify the reference counts of lower level extents when a non-shared tree block is cow'd. But we still need to update back ref for all pointers in the block. This is because the location of the block is recorded in the back ref item. We can solve this by introducing a new type of back ref. The new back ref provides information about pointer's key, level and in which tree the pointer lives. This information allow us to find the pointer by searching the tree. The shortcoming of the new back ref is that it only works for pointers in tree blocks referenced by their owner trees. This is mostly a problem for snapshots, where resolving one of these fuzzy back references would be O(number_of_snapshots) and quite slow. The solution used here is to use the fuzzy back references in the common case where a given tree block is only referenced by one root, and use the full back references when multiple roots have a reference on a given block. This commit adds per subvolume red-black tree to keep trace of cached inodes. The red-black tree helps the balancing code to find cached inodes whose inode numbers within a given range. This commit improves the balancing code by introducing several data structures to keep the state of balancing. The most important one is the back ref cache. It caches how the upper level tree blocks are referenced. This greatly reduce the overhead of checking back ref. The improved balancing code scales significantly better with a large number of snapshots. This is a very large commit and was written in a number of pieces. But, they depend heavily on the disk format change and were squashed together to make sure git bisect didn't end up in a bad state wrt space balancing or the format change. Signed-off-by: Yan Zheng <zheng.yan@oracle.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-06-10 22:45:14 +08:00
{
struct btrfs_root_item *root_item;
struct btrfs_super_block *super;
super = fs_info->super_copy;
Btrfs: Mixed back reference (FORWARD ROLLING FORMAT CHANGE) This commit introduces a new kind of back reference for btrfs metadata. Once a filesystem has been mounted with this commit, IT WILL NO LONGER BE MOUNTABLE BY OLDER KERNELS. When a tree block in subvolume tree is cow'd, the reference counts of all extents it points to are increased by one. At transaction commit time, the old root of the subvolume is recorded in a "dead root" data structure, and the btree it points to is later walked, dropping reference counts and freeing any blocks where the reference count goes to 0. The increments done during cow and decrements done after commit cancel out, and the walk is a very expensive way to go about freeing the blocks that are no longer referenced by the new btree root. This commit reduces the transaction overhead by avoiding the need for dead root records. When a non-shared tree block is cow'd, we free the old block at once, and the new block inherits old block's references. When a tree block with reference count > 1 is cow'd, we increase the reference counts of all extents the new block points to by one, and decrease the old block's reference count by one. This dead tree avoidance code removes the need to modify the reference counts of lower level extents when a non-shared tree block is cow'd. But we still need to update back ref for all pointers in the block. This is because the location of the block is recorded in the back ref item. We can solve this by introducing a new type of back ref. The new back ref provides information about pointer's key, level and in which tree the pointer lives. This information allow us to find the pointer by searching the tree. The shortcoming of the new back ref is that it only works for pointers in tree blocks referenced by their owner trees. This is mostly a problem for snapshots, where resolving one of these fuzzy back references would be O(number_of_snapshots) and quite slow. The solution used here is to use the fuzzy back references in the common case where a given tree block is only referenced by one root, and use the full back references when multiple roots have a reference on a given block. This commit adds per subvolume red-black tree to keep trace of cached inodes. The red-black tree helps the balancing code to find cached inodes whose inode numbers within a given range. This commit improves the balancing code by introducing several data structures to keep the state of balancing. The most important one is the back ref cache. It caches how the upper level tree blocks are referenced. This greatly reduce the overhead of checking back ref. The improved balancing code scales significantly better with a large number of snapshots. This is a very large commit and was written in a number of pieces. But, they depend heavily on the disk format change and were squashed together to make sure git bisect didn't end up in a bad state wrt space balancing or the format change. Signed-off-by: Yan Zheng <zheng.yan@oracle.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-06-10 22:45:14 +08:00
root_item = &fs_info->chunk_root->root_item;
super->chunk_root = root_item->bytenr;
super->chunk_root_generation = root_item->generation;
super->chunk_root_level = root_item->level;
Btrfs: Mixed back reference (FORWARD ROLLING FORMAT CHANGE) This commit introduces a new kind of back reference for btrfs metadata. Once a filesystem has been mounted with this commit, IT WILL NO LONGER BE MOUNTABLE BY OLDER KERNELS. When a tree block in subvolume tree is cow'd, the reference counts of all extents it points to are increased by one. At transaction commit time, the old root of the subvolume is recorded in a "dead root" data structure, and the btree it points to is later walked, dropping reference counts and freeing any blocks where the reference count goes to 0. The increments done during cow and decrements done after commit cancel out, and the walk is a very expensive way to go about freeing the blocks that are no longer referenced by the new btree root. This commit reduces the transaction overhead by avoiding the need for dead root records. When a non-shared tree block is cow'd, we free the old block at once, and the new block inherits old block's references. When a tree block with reference count > 1 is cow'd, we increase the reference counts of all extents the new block points to by one, and decrease the old block's reference count by one. This dead tree avoidance code removes the need to modify the reference counts of lower level extents when a non-shared tree block is cow'd. But we still need to update back ref for all pointers in the block. This is because the location of the block is recorded in the back ref item. We can solve this by introducing a new type of back ref. The new back ref provides information about pointer's key, level and in which tree the pointer lives. This information allow us to find the pointer by searching the tree. The shortcoming of the new back ref is that it only works for pointers in tree blocks referenced by their owner trees. This is mostly a problem for snapshots, where resolving one of these fuzzy back references would be O(number_of_snapshots) and quite slow. The solution used here is to use the fuzzy back references in the common case where a given tree block is only referenced by one root, and use the full back references when multiple roots have a reference on a given block. This commit adds per subvolume red-black tree to keep trace of cached inodes. The red-black tree helps the balancing code to find cached inodes whose inode numbers within a given range. This commit improves the balancing code by introducing several data structures to keep the state of balancing. The most important one is the back ref cache. It caches how the upper level tree blocks are referenced. This greatly reduce the overhead of checking back ref. The improved balancing code scales significantly better with a large number of snapshots. This is a very large commit and was written in a number of pieces. But, they depend heavily on the disk format change and were squashed together to make sure git bisect didn't end up in a bad state wrt space balancing or the format change. Signed-off-by: Yan Zheng <zheng.yan@oracle.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-06-10 22:45:14 +08:00
root_item = &fs_info->tree_root->root_item;
super->root = root_item->bytenr;
super->generation = root_item->generation;
super->root_level = root_item->level;
if (btrfs_test_opt(fs_info, SPACE_CACHE))
super->cache_generation = root_item->generation;
else if (test_bit(BTRFS_FS_CLEANUP_SPACE_CACHE_V1, &fs_info->flags))
super->cache_generation = 0;
if (test_bit(BTRFS_FS_UPDATE_UUID_TREE_GEN, &fs_info->flags))
super->uuid_tree_generation = root_item->generation;
if (btrfs_fs_incompat(fs_info, EXTENT_TREE_V2)) {
root_item = &fs_info->block_group_root->root_item;
super->block_group_root = root_item->bytenr;
super->block_group_root_generation = root_item->generation;
super->block_group_root_level = root_item->level;
}
Btrfs: Mixed back reference (FORWARD ROLLING FORMAT CHANGE) This commit introduces a new kind of back reference for btrfs metadata. Once a filesystem has been mounted with this commit, IT WILL NO LONGER BE MOUNTABLE BY OLDER KERNELS. When a tree block in subvolume tree is cow'd, the reference counts of all extents it points to are increased by one. At transaction commit time, the old root of the subvolume is recorded in a "dead root" data structure, and the btree it points to is later walked, dropping reference counts and freeing any blocks where the reference count goes to 0. The increments done during cow and decrements done after commit cancel out, and the walk is a very expensive way to go about freeing the blocks that are no longer referenced by the new btree root. This commit reduces the transaction overhead by avoiding the need for dead root records. When a non-shared tree block is cow'd, we free the old block at once, and the new block inherits old block's references. When a tree block with reference count > 1 is cow'd, we increase the reference counts of all extents the new block points to by one, and decrease the old block's reference count by one. This dead tree avoidance code removes the need to modify the reference counts of lower level extents when a non-shared tree block is cow'd. But we still need to update back ref for all pointers in the block. This is because the location of the block is recorded in the back ref item. We can solve this by introducing a new type of back ref. The new back ref provides information about pointer's key, level and in which tree the pointer lives. This information allow us to find the pointer by searching the tree. The shortcoming of the new back ref is that it only works for pointers in tree blocks referenced by their owner trees. This is mostly a problem for snapshots, where resolving one of these fuzzy back references would be O(number_of_snapshots) and quite slow. The solution used here is to use the fuzzy back references in the common case where a given tree block is only referenced by one root, and use the full back references when multiple roots have a reference on a given block. This commit adds per subvolume red-black tree to keep trace of cached inodes. The red-black tree helps the balancing code to find cached inodes whose inode numbers within a given range. This commit improves the balancing code by introducing several data structures to keep the state of balancing. The most important one is the back ref cache. It caches how the upper level tree blocks are referenced. This greatly reduce the overhead of checking back ref. The improved balancing code scales significantly better with a large number of snapshots. This is a very large commit and was written in a number of pieces. But, they depend heavily on the disk format change and were squashed together to make sure git bisect didn't end up in a bad state wrt space balancing or the format change. Signed-off-by: Yan Zheng <zheng.yan@oracle.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-06-10 22:45:14 +08:00
}
int btrfs_transaction_in_commit(struct btrfs_fs_info *info)
{
Btrfs: make the state of the transaction more readable We used 3 variants to track the state of the transaction, it was complex and wasted the memory space. Besides that, it was hard to understand that which types of the transaction handles should be blocked in each transaction state, so the developers often made mistakes. This patch improved the above problem. In this patch, we define 6 states for the transaction, enum btrfs_trans_state { TRANS_STATE_RUNNING = 0, TRANS_STATE_BLOCKED = 1, TRANS_STATE_COMMIT_START = 2, TRANS_STATE_COMMIT_DOING = 3, TRANS_STATE_UNBLOCKED = 4, TRANS_STATE_COMPLETED = 5, TRANS_STATE_MAX = 6, } and just use 1 variant to track those state. In order to make the blocked handle types for each state more clear, we introduce a array: unsigned int btrfs_blocked_trans_types[TRANS_STATE_MAX] = { [TRANS_STATE_RUNNING] = 0U, [TRANS_STATE_BLOCKED] = (__TRANS_USERSPACE | __TRANS_START), [TRANS_STATE_COMMIT_START] = (__TRANS_USERSPACE | __TRANS_START | __TRANS_ATTACH), [TRANS_STATE_COMMIT_DOING] = (__TRANS_USERSPACE | __TRANS_START | __TRANS_ATTACH | __TRANS_JOIN), [TRANS_STATE_UNBLOCKED] = (__TRANS_USERSPACE | __TRANS_START | __TRANS_ATTACH | __TRANS_JOIN | __TRANS_JOIN_NOLOCK), [TRANS_STATE_COMPLETED] = (__TRANS_USERSPACE | __TRANS_START | __TRANS_ATTACH | __TRANS_JOIN | __TRANS_JOIN_NOLOCK), } it is very intuitionistic. Besides that, because we remove ->in_commit in transaction structure, so the lock ->commit_lock which was used to protect it is unnecessary, remove ->commit_lock. Signed-off-by: Miao Xie <miaox@cn.fujitsu.com> Signed-off-by: Josef Bacik <jbacik@fusionio.com>
2013-05-17 11:53:43 +08:00
struct btrfs_transaction *trans;
int ret = 0;
Btrfs: make the state of the transaction more readable We used 3 variants to track the state of the transaction, it was complex and wasted the memory space. Besides that, it was hard to understand that which types of the transaction handles should be blocked in each transaction state, so the developers often made mistakes. This patch improved the above problem. In this patch, we define 6 states for the transaction, enum btrfs_trans_state { TRANS_STATE_RUNNING = 0, TRANS_STATE_BLOCKED = 1, TRANS_STATE_COMMIT_START = 2, TRANS_STATE_COMMIT_DOING = 3, TRANS_STATE_UNBLOCKED = 4, TRANS_STATE_COMPLETED = 5, TRANS_STATE_MAX = 6, } and just use 1 variant to track those state. In order to make the blocked handle types for each state more clear, we introduce a array: unsigned int btrfs_blocked_trans_types[TRANS_STATE_MAX] = { [TRANS_STATE_RUNNING] = 0U, [TRANS_STATE_BLOCKED] = (__TRANS_USERSPACE | __TRANS_START), [TRANS_STATE_COMMIT_START] = (__TRANS_USERSPACE | __TRANS_START | __TRANS_ATTACH), [TRANS_STATE_COMMIT_DOING] = (__TRANS_USERSPACE | __TRANS_START | __TRANS_ATTACH | __TRANS_JOIN), [TRANS_STATE_UNBLOCKED] = (__TRANS_USERSPACE | __TRANS_START | __TRANS_ATTACH | __TRANS_JOIN | __TRANS_JOIN_NOLOCK), [TRANS_STATE_COMPLETED] = (__TRANS_USERSPACE | __TRANS_START | __TRANS_ATTACH | __TRANS_JOIN | __TRANS_JOIN_NOLOCK), } it is very intuitionistic. Besides that, because we remove ->in_commit in transaction structure, so the lock ->commit_lock which was used to protect it is unnecessary, remove ->commit_lock. Signed-off-by: Miao Xie <miaox@cn.fujitsu.com> Signed-off-by: Josef Bacik <jbacik@fusionio.com>
2013-05-17 11:53:43 +08:00
Btrfs: kill trans_mutex We use trans_mutex for lots of things, here's a basic list 1) To serialize trans_handles joining the currently running transaction 2) To make sure that no new trans handles are started while we are committing 3) To protect the dead_roots list and the transaction lists Really the serializing trans_handles joining is not too hard, and can really get bogged down in acquiring a reference to the transaction. So replace the trans_mutex with a trans_lock spinlock and use it to do the following 1) Protect fs_info->running_transaction. All trans handles have to do is check this, and then take a reference of the transaction and keep on going. 2) Protect the fs_info->trans_list. This doesn't get used too much, basically it just holds the current transactions, which will usually just be the currently committing transaction and the currently running transaction at most. 3) Protect the dead roots list. This is only ever processed by splicing the list so this is relatively simple. 4) Protect the fs_info->reloc_ctl stuff. This is very lightweight and was using the trans_mutex before, so this is a pretty straightforward change. 5) Protect fs_info->no_trans_join. Because we don't hold the trans_lock over the entirety of the commit we need to have a way to block new people from creating a new transaction while we're doing our work. So we set no_trans_join and in join_transaction we test to see if that is set, and if it is we do a wait_on_commit. 6) Make the transaction use count atomic so we don't need to take locks to modify it when we're dropping references. 7) Add a commit_lock to the transaction to make sure multiple people trying to commit the same transaction don't race and commit at the same time. 8) Make open_ioctl_trans an atomic so we don't have to take any locks for ioctl trans. I have tested this with xfstests, but obviously it is a pretty hairy change so lots of testing is greatly appreciated. Thanks, Signed-off-by: Josef Bacik <josef@redhat.com>
2011-04-12 05:25:13 +08:00
spin_lock(&info->trans_lock);
Btrfs: make the state of the transaction more readable We used 3 variants to track the state of the transaction, it was complex and wasted the memory space. Besides that, it was hard to understand that which types of the transaction handles should be blocked in each transaction state, so the developers often made mistakes. This patch improved the above problem. In this patch, we define 6 states for the transaction, enum btrfs_trans_state { TRANS_STATE_RUNNING = 0, TRANS_STATE_BLOCKED = 1, TRANS_STATE_COMMIT_START = 2, TRANS_STATE_COMMIT_DOING = 3, TRANS_STATE_UNBLOCKED = 4, TRANS_STATE_COMPLETED = 5, TRANS_STATE_MAX = 6, } and just use 1 variant to track those state. In order to make the blocked handle types for each state more clear, we introduce a array: unsigned int btrfs_blocked_trans_types[TRANS_STATE_MAX] = { [TRANS_STATE_RUNNING] = 0U, [TRANS_STATE_BLOCKED] = (__TRANS_USERSPACE | __TRANS_START), [TRANS_STATE_COMMIT_START] = (__TRANS_USERSPACE | __TRANS_START | __TRANS_ATTACH), [TRANS_STATE_COMMIT_DOING] = (__TRANS_USERSPACE | __TRANS_START | __TRANS_ATTACH | __TRANS_JOIN), [TRANS_STATE_UNBLOCKED] = (__TRANS_USERSPACE | __TRANS_START | __TRANS_ATTACH | __TRANS_JOIN | __TRANS_JOIN_NOLOCK), [TRANS_STATE_COMPLETED] = (__TRANS_USERSPACE | __TRANS_START | __TRANS_ATTACH | __TRANS_JOIN | __TRANS_JOIN_NOLOCK), } it is very intuitionistic. Besides that, because we remove ->in_commit in transaction structure, so the lock ->commit_lock which was used to protect it is unnecessary, remove ->commit_lock. Signed-off-by: Miao Xie <miaox@cn.fujitsu.com> Signed-off-by: Josef Bacik <jbacik@fusionio.com>
2013-05-17 11:53:43 +08:00
trans = info->running_transaction;
if (trans)
ret = (trans->state >= TRANS_STATE_COMMIT_START);
Btrfs: kill trans_mutex We use trans_mutex for lots of things, here's a basic list 1) To serialize trans_handles joining the currently running transaction 2) To make sure that no new trans handles are started while we are committing 3) To protect the dead_roots list and the transaction lists Really the serializing trans_handles joining is not too hard, and can really get bogged down in acquiring a reference to the transaction. So replace the trans_mutex with a trans_lock spinlock and use it to do the following 1) Protect fs_info->running_transaction. All trans handles have to do is check this, and then take a reference of the transaction and keep on going. 2) Protect the fs_info->trans_list. This doesn't get used too much, basically it just holds the current transactions, which will usually just be the currently committing transaction and the currently running transaction at most. 3) Protect the dead roots list. This is only ever processed by splicing the list so this is relatively simple. 4) Protect the fs_info->reloc_ctl stuff. This is very lightweight and was using the trans_mutex before, so this is a pretty straightforward change. 5) Protect fs_info->no_trans_join. Because we don't hold the trans_lock over the entirety of the commit we need to have a way to block new people from creating a new transaction while we're doing our work. So we set no_trans_join and in join_transaction we test to see if that is set, and if it is we do a wait_on_commit. 6) Make the transaction use count atomic so we don't need to take locks to modify it when we're dropping references. 7) Add a commit_lock to the transaction to make sure multiple people trying to commit the same transaction don't race and commit at the same time. 8) Make open_ioctl_trans an atomic so we don't have to take any locks for ioctl trans. I have tested this with xfstests, but obviously it is a pretty hairy change so lots of testing is greatly appreciated. Thanks, Signed-off-by: Josef Bacik <josef@redhat.com>
2011-04-12 05:25:13 +08:00
spin_unlock(&info->trans_lock);
return ret;
}
int btrfs_transaction_blocked(struct btrfs_fs_info *info)
{
Btrfs: make the state of the transaction more readable We used 3 variants to track the state of the transaction, it was complex and wasted the memory space. Besides that, it was hard to understand that which types of the transaction handles should be blocked in each transaction state, so the developers often made mistakes. This patch improved the above problem. In this patch, we define 6 states for the transaction, enum btrfs_trans_state { TRANS_STATE_RUNNING = 0, TRANS_STATE_BLOCKED = 1, TRANS_STATE_COMMIT_START = 2, TRANS_STATE_COMMIT_DOING = 3, TRANS_STATE_UNBLOCKED = 4, TRANS_STATE_COMPLETED = 5, TRANS_STATE_MAX = 6, } and just use 1 variant to track those state. In order to make the blocked handle types for each state more clear, we introduce a array: unsigned int btrfs_blocked_trans_types[TRANS_STATE_MAX] = { [TRANS_STATE_RUNNING] = 0U, [TRANS_STATE_BLOCKED] = (__TRANS_USERSPACE | __TRANS_START), [TRANS_STATE_COMMIT_START] = (__TRANS_USERSPACE | __TRANS_START | __TRANS_ATTACH), [TRANS_STATE_COMMIT_DOING] = (__TRANS_USERSPACE | __TRANS_START | __TRANS_ATTACH | __TRANS_JOIN), [TRANS_STATE_UNBLOCKED] = (__TRANS_USERSPACE | __TRANS_START | __TRANS_ATTACH | __TRANS_JOIN | __TRANS_JOIN_NOLOCK), [TRANS_STATE_COMPLETED] = (__TRANS_USERSPACE | __TRANS_START | __TRANS_ATTACH | __TRANS_JOIN | __TRANS_JOIN_NOLOCK), } it is very intuitionistic. Besides that, because we remove ->in_commit in transaction structure, so the lock ->commit_lock which was used to protect it is unnecessary, remove ->commit_lock. Signed-off-by: Miao Xie <miaox@cn.fujitsu.com> Signed-off-by: Josef Bacik <jbacik@fusionio.com>
2013-05-17 11:53:43 +08:00
struct btrfs_transaction *trans;
int ret = 0;
Btrfs: make the state of the transaction more readable We used 3 variants to track the state of the transaction, it was complex and wasted the memory space. Besides that, it was hard to understand that which types of the transaction handles should be blocked in each transaction state, so the developers often made mistakes. This patch improved the above problem. In this patch, we define 6 states for the transaction, enum btrfs_trans_state { TRANS_STATE_RUNNING = 0, TRANS_STATE_BLOCKED = 1, TRANS_STATE_COMMIT_START = 2, TRANS_STATE_COMMIT_DOING = 3, TRANS_STATE_UNBLOCKED = 4, TRANS_STATE_COMPLETED = 5, TRANS_STATE_MAX = 6, } and just use 1 variant to track those state. In order to make the blocked handle types for each state more clear, we introduce a array: unsigned int btrfs_blocked_trans_types[TRANS_STATE_MAX] = { [TRANS_STATE_RUNNING] = 0U, [TRANS_STATE_BLOCKED] = (__TRANS_USERSPACE | __TRANS_START), [TRANS_STATE_COMMIT_START] = (__TRANS_USERSPACE | __TRANS_START | __TRANS_ATTACH), [TRANS_STATE_COMMIT_DOING] = (__TRANS_USERSPACE | __TRANS_START | __TRANS_ATTACH | __TRANS_JOIN), [TRANS_STATE_UNBLOCKED] = (__TRANS_USERSPACE | __TRANS_START | __TRANS_ATTACH | __TRANS_JOIN | __TRANS_JOIN_NOLOCK), [TRANS_STATE_COMPLETED] = (__TRANS_USERSPACE | __TRANS_START | __TRANS_ATTACH | __TRANS_JOIN | __TRANS_JOIN_NOLOCK), } it is very intuitionistic. Besides that, because we remove ->in_commit in transaction structure, so the lock ->commit_lock which was used to protect it is unnecessary, remove ->commit_lock. Signed-off-by: Miao Xie <miaox@cn.fujitsu.com> Signed-off-by: Josef Bacik <jbacik@fusionio.com>
2013-05-17 11:53:43 +08:00
Btrfs: kill trans_mutex We use trans_mutex for lots of things, here's a basic list 1) To serialize trans_handles joining the currently running transaction 2) To make sure that no new trans handles are started while we are committing 3) To protect the dead_roots list and the transaction lists Really the serializing trans_handles joining is not too hard, and can really get bogged down in acquiring a reference to the transaction. So replace the trans_mutex with a trans_lock spinlock and use it to do the following 1) Protect fs_info->running_transaction. All trans handles have to do is check this, and then take a reference of the transaction and keep on going. 2) Protect the fs_info->trans_list. This doesn't get used too much, basically it just holds the current transactions, which will usually just be the currently committing transaction and the currently running transaction at most. 3) Protect the dead roots list. This is only ever processed by splicing the list so this is relatively simple. 4) Protect the fs_info->reloc_ctl stuff. This is very lightweight and was using the trans_mutex before, so this is a pretty straightforward change. 5) Protect fs_info->no_trans_join. Because we don't hold the trans_lock over the entirety of the commit we need to have a way to block new people from creating a new transaction while we're doing our work. So we set no_trans_join and in join_transaction we test to see if that is set, and if it is we do a wait_on_commit. 6) Make the transaction use count atomic so we don't need to take locks to modify it when we're dropping references. 7) Add a commit_lock to the transaction to make sure multiple people trying to commit the same transaction don't race and commit at the same time. 8) Make open_ioctl_trans an atomic so we don't have to take any locks for ioctl trans. I have tested this with xfstests, but obviously it is a pretty hairy change so lots of testing is greatly appreciated. Thanks, Signed-off-by: Josef Bacik <josef@redhat.com>
2011-04-12 05:25:13 +08:00
spin_lock(&info->trans_lock);
Btrfs: make the state of the transaction more readable We used 3 variants to track the state of the transaction, it was complex and wasted the memory space. Besides that, it was hard to understand that which types of the transaction handles should be blocked in each transaction state, so the developers often made mistakes. This patch improved the above problem. In this patch, we define 6 states for the transaction, enum btrfs_trans_state { TRANS_STATE_RUNNING = 0, TRANS_STATE_BLOCKED = 1, TRANS_STATE_COMMIT_START = 2, TRANS_STATE_COMMIT_DOING = 3, TRANS_STATE_UNBLOCKED = 4, TRANS_STATE_COMPLETED = 5, TRANS_STATE_MAX = 6, } and just use 1 variant to track those state. In order to make the blocked handle types for each state more clear, we introduce a array: unsigned int btrfs_blocked_trans_types[TRANS_STATE_MAX] = { [TRANS_STATE_RUNNING] = 0U, [TRANS_STATE_BLOCKED] = (__TRANS_USERSPACE | __TRANS_START), [TRANS_STATE_COMMIT_START] = (__TRANS_USERSPACE | __TRANS_START | __TRANS_ATTACH), [TRANS_STATE_COMMIT_DOING] = (__TRANS_USERSPACE | __TRANS_START | __TRANS_ATTACH | __TRANS_JOIN), [TRANS_STATE_UNBLOCKED] = (__TRANS_USERSPACE | __TRANS_START | __TRANS_ATTACH | __TRANS_JOIN | __TRANS_JOIN_NOLOCK), [TRANS_STATE_COMPLETED] = (__TRANS_USERSPACE | __TRANS_START | __TRANS_ATTACH | __TRANS_JOIN | __TRANS_JOIN_NOLOCK), } it is very intuitionistic. Besides that, because we remove ->in_commit in transaction structure, so the lock ->commit_lock which was used to protect it is unnecessary, remove ->commit_lock. Signed-off-by: Miao Xie <miaox@cn.fujitsu.com> Signed-off-by: Josef Bacik <jbacik@fusionio.com>
2013-05-17 11:53:43 +08:00
trans = info->running_transaction;
if (trans)
ret = is_transaction_blocked(trans);
Btrfs: kill trans_mutex We use trans_mutex for lots of things, here's a basic list 1) To serialize trans_handles joining the currently running transaction 2) To make sure that no new trans handles are started while we are committing 3) To protect the dead_roots list and the transaction lists Really the serializing trans_handles joining is not too hard, and can really get bogged down in acquiring a reference to the transaction. So replace the trans_mutex with a trans_lock spinlock and use it to do the following 1) Protect fs_info->running_transaction. All trans handles have to do is check this, and then take a reference of the transaction and keep on going. 2) Protect the fs_info->trans_list. This doesn't get used too much, basically it just holds the current transactions, which will usually just be the currently committing transaction and the currently running transaction at most. 3) Protect the dead roots list. This is only ever processed by splicing the list so this is relatively simple. 4) Protect the fs_info->reloc_ctl stuff. This is very lightweight and was using the trans_mutex before, so this is a pretty straightforward change. 5) Protect fs_info->no_trans_join. Because we don't hold the trans_lock over the entirety of the commit we need to have a way to block new people from creating a new transaction while we're doing our work. So we set no_trans_join and in join_transaction we test to see if that is set, and if it is we do a wait_on_commit. 6) Make the transaction use count atomic so we don't need to take locks to modify it when we're dropping references. 7) Add a commit_lock to the transaction to make sure multiple people trying to commit the same transaction don't race and commit at the same time. 8) Make open_ioctl_trans an atomic so we don't have to take any locks for ioctl trans. I have tested this with xfstests, but obviously it is a pretty hairy change so lots of testing is greatly appreciated. Thanks, Signed-off-by: Josef Bacik <josef@redhat.com>
2011-04-12 05:25:13 +08:00
spin_unlock(&info->trans_lock);
return ret;
}
void btrfs_commit_transaction_async(struct btrfs_trans_handle *trans)
{
struct btrfs_fs_info *fs_info = trans->fs_info;
struct btrfs_transaction *cur_trans;
/* Kick the transaction kthread. */
set_bit(BTRFS_FS_COMMIT_TRANS, &fs_info->flags);
wake_up_process(fs_info->transaction_kthread);
/* take transaction reference */
cur_trans = trans->transaction;
refcount_inc(&cur_trans->use_count);
btrfs_end_transaction(trans);
/*
* Wait for the current transaction commit to start and block
* subsequent transaction joins
*/
wait_event(fs_info->transaction_blocked_wait,
cur_trans->state >= TRANS_STATE_COMMIT_START ||
TRANS_ABORTED(cur_trans));
btrfs_put_transaction(cur_trans);
}
static void cleanup_transaction(struct btrfs_trans_handle *trans, int err)
{
struct btrfs_fs_info *fs_info = trans->fs_info;
struct btrfs_transaction *cur_trans = trans->transaction;
WARN_ON(refcount_read(&trans->use_count) > 1);
btrfs_abort_transaction(trans, err);
spin_lock(&fs_info->trans_lock);
/*
* If the transaction is removed from the list, it means this
* transaction has been committed successfully, so it is impossible
* to call the cleanup function.
*/
BUG_ON(list_empty(&cur_trans->list));
if (cur_trans == fs_info->running_transaction) {
Btrfs: make the state of the transaction more readable We used 3 variants to track the state of the transaction, it was complex and wasted the memory space. Besides that, it was hard to understand that which types of the transaction handles should be blocked in each transaction state, so the developers often made mistakes. This patch improved the above problem. In this patch, we define 6 states for the transaction, enum btrfs_trans_state { TRANS_STATE_RUNNING = 0, TRANS_STATE_BLOCKED = 1, TRANS_STATE_COMMIT_START = 2, TRANS_STATE_COMMIT_DOING = 3, TRANS_STATE_UNBLOCKED = 4, TRANS_STATE_COMPLETED = 5, TRANS_STATE_MAX = 6, } and just use 1 variant to track those state. In order to make the blocked handle types for each state more clear, we introduce a array: unsigned int btrfs_blocked_trans_types[TRANS_STATE_MAX] = { [TRANS_STATE_RUNNING] = 0U, [TRANS_STATE_BLOCKED] = (__TRANS_USERSPACE | __TRANS_START), [TRANS_STATE_COMMIT_START] = (__TRANS_USERSPACE | __TRANS_START | __TRANS_ATTACH), [TRANS_STATE_COMMIT_DOING] = (__TRANS_USERSPACE | __TRANS_START | __TRANS_ATTACH | __TRANS_JOIN), [TRANS_STATE_UNBLOCKED] = (__TRANS_USERSPACE | __TRANS_START | __TRANS_ATTACH | __TRANS_JOIN | __TRANS_JOIN_NOLOCK), [TRANS_STATE_COMPLETED] = (__TRANS_USERSPACE | __TRANS_START | __TRANS_ATTACH | __TRANS_JOIN | __TRANS_JOIN_NOLOCK), } it is very intuitionistic. Besides that, because we remove ->in_commit in transaction structure, so the lock ->commit_lock which was used to protect it is unnecessary, remove ->commit_lock. Signed-off-by: Miao Xie <miaox@cn.fujitsu.com> Signed-off-by: Josef Bacik <jbacik@fusionio.com>
2013-05-17 11:53:43 +08:00
cur_trans->state = TRANS_STATE_COMMIT_DOING;
spin_unlock(&fs_info->trans_lock);
wait_event(cur_trans->writer_wait,
atomic_read(&cur_trans->num_writers) == 1);
spin_lock(&fs_info->trans_lock);
}
btrfs: fix race between transaction aborts and fsyncs leading to use-after-free There is a race between a task aborting a transaction during a commit, a task doing an fsync and the transaction kthread, which leads to an use-after-free of the log root tree. When this happens, it results in a stack trace like the following: BTRFS info (device dm-0): forced readonly BTRFS warning (device dm-0): Skipping commit of aborted transaction. BTRFS: error (device dm-0) in cleanup_transaction:1958: errno=-5 IO failure BTRFS warning (device dm-0): lost page write due to IO error on /dev/mapper/error-test (-5) BTRFS warning (device dm-0): Skipping commit of aborted transaction. BTRFS warning (device dm-0): direct IO failed ino 261 rw 0,0 sector 0xa4e8 len 4096 err no 10 BTRFS error (device dm-0): error writing primary super block to device 1 BTRFS warning (device dm-0): direct IO failed ino 261 rw 0,0 sector 0x12e000 len 4096 err no 10 BTRFS warning (device dm-0): direct IO failed ino 261 rw 0,0 sector 0x12e008 len 4096 err no 10 BTRFS warning (device dm-0): direct IO failed ino 261 rw 0,0 sector 0x12e010 len 4096 err no 10 BTRFS: error (device dm-0) in write_all_supers:4110: errno=-5 IO failure (1 errors while writing supers) BTRFS: error (device dm-0) in btrfs_sync_log:3308: errno=-5 IO failure general protection fault, probably for non-canonical address 0x6b6b6b6b6b6b6b68: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC PTI CPU: 2 PID: 2458471 Comm: fsstress Not tainted 5.12.0-rc5-btrfs-next-84 #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014 RIP: 0010:__mutex_lock+0x139/0xa40 Code: c0 74 19 (...) RSP: 0018:ffff9f18830d7b00 EFLAGS: 00010202 RAX: 6b6b6b6b6b6b6b68 RBX: 0000000000000001 RCX: 0000000000000002 RDX: ffffffffb9c54d13 RSI: 0000000000000000 RDI: 0000000000000000 RBP: ffff9f18830d7bc0 R08: 0000000000000000 R09: 0000000000000000 R10: ffff9f18830d7be0 R11: 0000000000000001 R12: ffff8c6cd199c040 R13: ffff8c6c95821358 R14: 00000000fffffffb R15: ffff8c6cbcf01358 FS: 00007fa9140c2b80(0000) GS:ffff8c6fac600000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fa913d52000 CR3: 000000013d2b4003 CR4: 0000000000370ee0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: ? __btrfs_handle_fs_error+0xde/0x146 [btrfs] ? btrfs_sync_log+0x7c1/0xf20 [btrfs] ? btrfs_sync_log+0x7c1/0xf20 [btrfs] btrfs_sync_log+0x7c1/0xf20 [btrfs] btrfs_sync_file+0x40c/0x580 [btrfs] do_fsync+0x38/0x70 __x64_sys_fsync+0x10/0x20 do_syscall_64+0x33/0x80 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x7fa9142a55c3 Code: 8b 15 09 (...) RSP: 002b:00007fff26278d48 EFLAGS: 00000246 ORIG_RAX: 000000000000004a RAX: ffffffffffffffda RBX: 0000563c83cb4560 RCX: 00007fa9142a55c3 RDX: 00007fff26278cb0 RSI: 00007fff26278cb0 RDI: 0000000000000005 RBP: 0000000000000005 R08: 0000000000000001 R09: 00007fff26278d5c R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000340 R13: 00007fff26278de0 R14: 00007fff26278d96 R15: 0000563c83ca57c0 Modules linked in: btrfs dm_zero dm_snapshot dm_thin_pool (...) ---[ end trace ee2f1b19327d791d ]--- The steps that lead to this crash are the following: 1) We are at transaction N; 2) We have two tasks with a transaction handle attached to transaction N. Task A and Task B. Task B is doing an fsync; 3) Task B is at btrfs_sync_log(), and has saved fs_info->log_root_tree into a local variable named 'log_root_tree' at the top of btrfs_sync_log(). Task B is about to call write_all_supers(), but before that... 4) Task A calls btrfs_commit_transaction(), and after it sets the transaction state to TRANS_STATE_COMMIT_START, an error happens before it waits for the transaction's 'num_writers' counter to reach a value of 1 (no one else attached to the transaction), so it jumps to the label "cleanup_transaction"; 5) Task A then calls cleanup_transaction(), where it aborts the transaction, setting BTRFS_FS_STATE_TRANS_ABORTED on fs_info->fs_state, setting the ->aborted field of the transaction and the handle to an errno value and also setting BTRFS_FS_STATE_ERROR on fs_info->fs_state. After that, at cleanup_transaction(), it deletes the transaction from the list of transactions (fs_info->trans_list), sets the transaction to the state TRANS_STATE_COMMIT_DOING and then waits for the number of writers to go down to 1, as it's currently 2 (1 for task A and 1 for task B); 6) The transaction kthread is running and sees that BTRFS_FS_STATE_ERROR is set in fs_info->fs_state, so it calls btrfs_cleanup_transaction(). There it sees the list fs_info->trans_list is empty, and then proceeds into calling btrfs_drop_all_logs(), which frees the log root tree with a call to btrfs_free_log_root_tree(); 7) Task B calls write_all_supers() and, shortly after, under the label 'out_wake_log_root', it deferences the pointer stored in 'log_root_tree', which was already freed in the previous step by the transaction kthread. This results in a use-after-free leading to a crash. Fix this by deleting the transaction from the list of transactions at cleanup_transaction() only after setting the transaction state to TRANS_STATE_COMMIT_DOING and waiting for all existing tasks that are attached to the transaction to release their transaction handles. This makes the transaction kthread wait for all the tasks attached to the transaction to be done with the transaction before dropping the log roots and doing other cleanups. Fixes: ef67963dac255b ("btrfs: drop logs when we've aborted a transaction") CC: stable@vger.kernel.org # 5.10+ Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2021-04-05 19:32:16 +08:00
/*
* Now that we know no one else is still using the transaction we can
* remove the transaction from the list of transactions. This avoids
* the transaction kthread from cleaning up the transaction while some
* other task is still using it, which could result in a use-after-free
* on things like log trees, as it forces the transaction kthread to
* wait for this transaction to be cleaned up by us.
*/
list_del_init(&cur_trans->list);
spin_unlock(&fs_info->trans_lock);
btrfs_cleanup_one_transaction(trans->transaction, fs_info);
spin_lock(&fs_info->trans_lock);
if (cur_trans == fs_info->running_transaction)
fs_info->running_transaction = NULL;
spin_unlock(&fs_info->trans_lock);
Btrfs: make the state of the transaction more readable We used 3 variants to track the state of the transaction, it was complex and wasted the memory space. Besides that, it was hard to understand that which types of the transaction handles should be blocked in each transaction state, so the developers often made mistakes. This patch improved the above problem. In this patch, we define 6 states for the transaction, enum btrfs_trans_state { TRANS_STATE_RUNNING = 0, TRANS_STATE_BLOCKED = 1, TRANS_STATE_COMMIT_START = 2, TRANS_STATE_COMMIT_DOING = 3, TRANS_STATE_UNBLOCKED = 4, TRANS_STATE_COMPLETED = 5, TRANS_STATE_MAX = 6, } and just use 1 variant to track those state. In order to make the blocked handle types for each state more clear, we introduce a array: unsigned int btrfs_blocked_trans_types[TRANS_STATE_MAX] = { [TRANS_STATE_RUNNING] = 0U, [TRANS_STATE_BLOCKED] = (__TRANS_USERSPACE | __TRANS_START), [TRANS_STATE_COMMIT_START] = (__TRANS_USERSPACE | __TRANS_START | __TRANS_ATTACH), [TRANS_STATE_COMMIT_DOING] = (__TRANS_USERSPACE | __TRANS_START | __TRANS_ATTACH | __TRANS_JOIN), [TRANS_STATE_UNBLOCKED] = (__TRANS_USERSPACE | __TRANS_START | __TRANS_ATTACH | __TRANS_JOIN | __TRANS_JOIN_NOLOCK), [TRANS_STATE_COMPLETED] = (__TRANS_USERSPACE | __TRANS_START | __TRANS_ATTACH | __TRANS_JOIN | __TRANS_JOIN_NOLOCK), } it is very intuitionistic. Besides that, because we remove ->in_commit in transaction structure, so the lock ->commit_lock which was used to protect it is unnecessary, remove ->commit_lock. Signed-off-by: Miao Xie <miaox@cn.fujitsu.com> Signed-off-by: Josef Bacik <jbacik@fusionio.com>
2013-05-17 11:53:43 +08:00
if (trans->type & __TRANS_FREEZABLE)
sb_end_intwrite(fs_info->sb);
btrfs_put_transaction(cur_trans);
btrfs_put_transaction(cur_trans);
trace_btrfs_transaction_commit(fs_info);
if (current->journal_info == trans)
current->journal_info = NULL;
btrfs_scrub_cancel(fs_info);
kmem_cache_free(btrfs_trans_handle_cachep, trans);
}
btrfs: clean up pending block groups when transaction commit aborts The fstests generic/475 stresses transaction aborts and can reveal space accounting or use-after-free bugs regarding block goups. In this case the pending block groups that remain linked to the structures after transaction commit aborts in the middle. The corrupted slabs lead to failures in following tests, eg. generic/476 [ 8172.752887] BUG: unable to handle kernel NULL pointer dereference at 0000000000000058 [ 8172.755799] #PF error: [normal kernel read fault] [ 8172.757571] PGD 661ae067 P4D 661ae067 PUD 3db8e067 PMD 0 [ 8172.759000] Oops: 0000 [#1] PREEMPT SMP [ 8172.760209] CPU: 0 PID: 39 Comm: kswapd0 Tainted: G W 5.0.0-rc2-default #408 [ 8172.762495] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.11.2-0-gf9626cc-prebuilt.qemu-project.org 04/01/2014 [ 8172.765772] RIP: 0010:shrink_page_list+0x2f9/0xe90 [ 8172.770453] RSP: 0018:ffff967f00663b18 EFLAGS: 00010287 [ 8172.771184] RAX: 0000000000000000 RBX: ffff967f00663c20 RCX: 0000000000000000 [ 8172.772850] RDX: 0000000000000000 RSI: 0000000000000001 RDI: ffff8c0620ab20e0 [ 8172.774629] RBP: ffff967f00663dd8 R08: 0000000000000000 R09: 0000000000000000 [ 8172.776094] R10: ffff8c0620ab22f8 R11: ffff8c063f772688 R12: ffff967f00663b78 [ 8172.777533] R13: ffff8c063f625600 R14: ffff8c063f625608 R15: dead000000000200 [ 8172.778886] FS: 0000000000000000(0000) GS:ffff8c063d400000(0000) knlGS:0000000000000000 [ 8172.780545] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 8172.781787] CR2: 0000000000000058 CR3: 000000004e962000 CR4: 00000000000006f0 [ 8172.783547] Call Trace: [ 8172.784112] shrink_inactive_list+0x194/0x410 [ 8172.784747] shrink_node_memcg.constprop.85+0x3a5/0x6a0 [ 8172.785472] shrink_node+0x62/0x1e0 [ 8172.786011] balance_pgdat+0x216/0x460 [ 8172.786577] kswapd+0xe3/0x4a0 [ 8172.787085] ? finish_wait+0x80/0x80 [ 8172.787795] ? balance_pgdat+0x460/0x460 [ 8172.788799] kthread+0x116/0x130 [ 8172.789640] ? kthread_create_on_node+0x60/0x60 [ 8172.790323] ret_from_fork+0x24/0x30 [ 8172.794253] CR2: 0000000000000058 or accounting errors at umount time: [ 8159.537251] WARNING: CPU: 2 PID: 19031 at fs/btrfs/extent-tree.c:5987 btrfs_free_block_groups+0x3d5/0x410 [btrfs] [ 8159.543325] CPU: 2 PID: 19031 Comm: umount Tainted: G W 5.0.0-rc2-default #408 [ 8159.545472] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.11.2-0-gf9626cc-prebuilt.qemu-project.org 04/01/2014 [ 8159.548155] RIP: 0010:btrfs_free_block_groups+0x3d5/0x410 [btrfs] [ 8159.554030] RSP: 0018:ffff967f079cbde8 EFLAGS: 00010206 [ 8159.555144] RAX: 0000000001000000 RBX: ffff8c06366cf800 RCX: 0000000000000000 [ 8159.556730] RDX: 0000000000000002 RSI: 0000000000000001 RDI: ffff8c06255ad800 [ 8159.558279] RBP: ffff8c0637ac0000 R08: 0000000000000001 R09: 0000000000000000 [ 8159.559797] R10: 0000000000000000 R11: 0000000000000001 R12: ffff8c0637ac0108 [ 8159.561296] R13: ffff8c0637ac0158 R14: 0000000000000000 R15: dead000000000100 [ 8159.562852] FS: 00007f7f693b9fc0(0000) GS:ffff8c063d800000(0000) knlGS:0000000000000000 [ 8159.564839] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 8159.566160] CR2: 00007f7f68fab7b0 CR3: 000000000aec7000 CR4: 00000000000006e0 [ 8159.567898] Call Trace: [ 8159.568597] close_ctree+0x17f/0x350 [btrfs] [ 8159.569628] generic_shutdown_super+0x64/0x100 [ 8159.570808] kill_anon_super+0x14/0x30 [ 8159.571857] btrfs_kill_super+0x12/0xa0 [btrfs] [ 8159.573063] deactivate_locked_super+0x29/0x60 [ 8159.574234] cleanup_mnt+0x3b/0x70 [ 8159.575176] task_work_run+0x98/0xc0 [ 8159.576177] exit_to_usermode_loop+0x83/0x90 [ 8159.577315] do_syscall_64+0x15b/0x180 [ 8159.578339] entry_SYSCALL_64_after_hwframe+0x49/0xbe This fix is based on 2 Josef's patches that used sideefects of btrfs_create_pending_block_groups, this fix introduces the helper that does what we need. CC: stable@vger.kernel.org # 4.4+ CC: Josef Bacik <josef@toxicpanda.com> Reviewed-by: Nikolay Borisov <nborisov@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2019-01-24 00:09:16 +08:00
/*
* Release reserved delayed ref space of all pending block groups of the
* transaction and remove them from the list
*/
static void btrfs_cleanup_pending_block_groups(struct btrfs_trans_handle *trans)
{
struct btrfs_fs_info *fs_info = trans->fs_info;
struct btrfs_block_group *block_group, *tmp;
btrfs: clean up pending block groups when transaction commit aborts The fstests generic/475 stresses transaction aborts and can reveal space accounting or use-after-free bugs regarding block goups. In this case the pending block groups that remain linked to the structures after transaction commit aborts in the middle. The corrupted slabs lead to failures in following tests, eg. generic/476 [ 8172.752887] BUG: unable to handle kernel NULL pointer dereference at 0000000000000058 [ 8172.755799] #PF error: [normal kernel read fault] [ 8172.757571] PGD 661ae067 P4D 661ae067 PUD 3db8e067 PMD 0 [ 8172.759000] Oops: 0000 [#1] PREEMPT SMP [ 8172.760209] CPU: 0 PID: 39 Comm: kswapd0 Tainted: G W 5.0.0-rc2-default #408 [ 8172.762495] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.11.2-0-gf9626cc-prebuilt.qemu-project.org 04/01/2014 [ 8172.765772] RIP: 0010:shrink_page_list+0x2f9/0xe90 [ 8172.770453] RSP: 0018:ffff967f00663b18 EFLAGS: 00010287 [ 8172.771184] RAX: 0000000000000000 RBX: ffff967f00663c20 RCX: 0000000000000000 [ 8172.772850] RDX: 0000000000000000 RSI: 0000000000000001 RDI: ffff8c0620ab20e0 [ 8172.774629] RBP: ffff967f00663dd8 R08: 0000000000000000 R09: 0000000000000000 [ 8172.776094] R10: ffff8c0620ab22f8 R11: ffff8c063f772688 R12: ffff967f00663b78 [ 8172.777533] R13: ffff8c063f625600 R14: ffff8c063f625608 R15: dead000000000200 [ 8172.778886] FS: 0000000000000000(0000) GS:ffff8c063d400000(0000) knlGS:0000000000000000 [ 8172.780545] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 8172.781787] CR2: 0000000000000058 CR3: 000000004e962000 CR4: 00000000000006f0 [ 8172.783547] Call Trace: [ 8172.784112] shrink_inactive_list+0x194/0x410 [ 8172.784747] shrink_node_memcg.constprop.85+0x3a5/0x6a0 [ 8172.785472] shrink_node+0x62/0x1e0 [ 8172.786011] balance_pgdat+0x216/0x460 [ 8172.786577] kswapd+0xe3/0x4a0 [ 8172.787085] ? finish_wait+0x80/0x80 [ 8172.787795] ? balance_pgdat+0x460/0x460 [ 8172.788799] kthread+0x116/0x130 [ 8172.789640] ? kthread_create_on_node+0x60/0x60 [ 8172.790323] ret_from_fork+0x24/0x30 [ 8172.794253] CR2: 0000000000000058 or accounting errors at umount time: [ 8159.537251] WARNING: CPU: 2 PID: 19031 at fs/btrfs/extent-tree.c:5987 btrfs_free_block_groups+0x3d5/0x410 [btrfs] [ 8159.543325] CPU: 2 PID: 19031 Comm: umount Tainted: G W 5.0.0-rc2-default #408 [ 8159.545472] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.11.2-0-gf9626cc-prebuilt.qemu-project.org 04/01/2014 [ 8159.548155] RIP: 0010:btrfs_free_block_groups+0x3d5/0x410 [btrfs] [ 8159.554030] RSP: 0018:ffff967f079cbde8 EFLAGS: 00010206 [ 8159.555144] RAX: 0000000001000000 RBX: ffff8c06366cf800 RCX: 0000000000000000 [ 8159.556730] RDX: 0000000000000002 RSI: 0000000000000001 RDI: ffff8c06255ad800 [ 8159.558279] RBP: ffff8c0637ac0000 R08: 0000000000000001 R09: 0000000000000000 [ 8159.559797] R10: 0000000000000000 R11: 0000000000000001 R12: ffff8c0637ac0108 [ 8159.561296] R13: ffff8c0637ac0158 R14: 0000000000000000 R15: dead000000000100 [ 8159.562852] FS: 00007f7f693b9fc0(0000) GS:ffff8c063d800000(0000) knlGS:0000000000000000 [ 8159.564839] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 8159.566160] CR2: 00007f7f68fab7b0 CR3: 000000000aec7000 CR4: 00000000000006e0 [ 8159.567898] Call Trace: [ 8159.568597] close_ctree+0x17f/0x350 [btrfs] [ 8159.569628] generic_shutdown_super+0x64/0x100 [ 8159.570808] kill_anon_super+0x14/0x30 [ 8159.571857] btrfs_kill_super+0x12/0xa0 [btrfs] [ 8159.573063] deactivate_locked_super+0x29/0x60 [ 8159.574234] cleanup_mnt+0x3b/0x70 [ 8159.575176] task_work_run+0x98/0xc0 [ 8159.576177] exit_to_usermode_loop+0x83/0x90 [ 8159.577315] do_syscall_64+0x15b/0x180 [ 8159.578339] entry_SYSCALL_64_after_hwframe+0x49/0xbe This fix is based on 2 Josef's patches that used sideefects of btrfs_create_pending_block_groups, this fix introduces the helper that does what we need. CC: stable@vger.kernel.org # 4.4+ CC: Josef Bacik <josef@toxicpanda.com> Reviewed-by: Nikolay Borisov <nborisov@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2019-01-24 00:09:16 +08:00
list_for_each_entry_safe(block_group, tmp, &trans->new_bgs, bg_list) {
btrfs_delayed_refs_rsv_release(fs_info, 1);
list_del_init(&block_group->bg_list);
}
}
static inline int btrfs_start_delalloc_flush(struct btrfs_fs_info *fs_info)
{
/*
btrfs: get rid of warning on transaction commit when using flushoncommit When using the flushoncommit mount option, during almost every transaction commit we trigger a warning from __writeback_inodes_sb_nr(): $ cat fs/fs-writeback.c: (...) static void __writeback_inodes_sb_nr(struct super_block *sb, ... { (...) WARN_ON(!rwsem_is_locked(&sb->s_umount)); (...) } (...) The trace produced in dmesg looks like the following: [947.473890] WARNING: CPU: 5 PID: 930 at fs/fs-writeback.c:2610 __writeback_inodes_sb_nr+0x7e/0xb3 [947.481623] Modules linked in: nfsd nls_cp437 cifs asn1_decoder cifs_arc4 fscache cifs_md4 ipmi_ssif [947.489571] CPU: 5 PID: 930 Comm: btrfs-transacti Not tainted 95.16.3-srb-asrock-00001-g36437ad63879 #186 [947.497969] RIP: 0010:__writeback_inodes_sb_nr+0x7e/0xb3 [947.502097] Code: 24 10 4c 89 44 24 18 c6 (...) [947.519760] RSP: 0018:ffffc90000777e10 EFLAGS: 00010246 [947.523818] RAX: 0000000000000000 RBX: 0000000000963300 RCX: 0000000000000000 [947.529765] RDX: 0000000000000000 RSI: 000000000000fa51 RDI: ffffc90000777e50 [947.535740] RBP: ffff888101628a90 R08: ffff888100955800 R09: ffff888100956000 [947.541701] R10: 0000000000000002 R11: 0000000000000001 R12: ffff888100963488 [947.547645] R13: ffff888100963000 R14: ffff888112fb7200 R15: ffff888100963460 [947.553621] FS: 0000000000000000(0000) GS:ffff88841fd40000(0000) knlGS:0000000000000000 [947.560537] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [947.565122] CR2: 0000000008be50c4 CR3: 000000000220c000 CR4: 00000000001006e0 [947.571072] Call Trace: [947.572354] <TASK> [947.573266] btrfs_commit_transaction+0x1f1/0x998 [947.576785] ? start_transaction+0x3ab/0x44e [947.579867] ? schedule_timeout+0x8a/0xdd [947.582716] transaction_kthread+0xe9/0x156 [947.585721] ? btrfs_cleanup_transaction.isra.0+0x407/0x407 [947.590104] kthread+0x131/0x139 [947.592168] ? set_kthread_struct+0x32/0x32 [947.595174] ret_from_fork+0x22/0x30 [947.597561] </TASK> [947.598553] ---[ end trace 644721052755541c ]--- This is because we started using writeback_inodes_sb() to flush delalloc when committing a transaction (when using -o flushoncommit), in order to avoid deadlocks with filesystem freeze operations. This change was made by commit ce8ea7cc6eb313 ("btrfs: don't call btrfs_start_delalloc_roots in flushoncommit"). After that change we started producing that warning, and every now and then a user reports this since the warning happens too often, it spams dmesg/syslog, and a user is unsure if this reflects any problem that might compromise the filesystem's reliability. We can not just lock the sb->s_umount semaphore before calling writeback_inodes_sb(), because that would at least deadlock with filesystem freezing, since at fs/super.c:freeze_super() sync_filesystem() is called while we are holding that semaphore in write mode, and that can trigger a transaction commit, resulting in a deadlock. It would also trigger the same type of deadlock in the unmount path. Possibly, it could also introduce some other locking dependencies that lockdep would report. To fix this call try_to_writeback_inodes_sb() instead of writeback_inodes_sb(), because that will try to read lock sb->s_umount and then will only call writeback_inodes_sb() if it was able to lock it. This is fine because the cases where it can't read lock sb->s_umount are during a filesystem unmount or during a filesystem freeze - in those cases sb->s_umount is write locked and sync_filesystem() is called, which calls writeback_inodes_sb(). In other words, in all cases where we can't take a read lock on sb->s_umount, writeback is already being triggered elsewhere. An alternative would be to call btrfs_start_delalloc_roots() with a number of pages different from LONG_MAX, for example matching the number of delalloc bytes we currently have, in which case we would end up starting all delalloc with filemap_fdatawrite_wbc() and not with an async flush via filemap_flush() - that is only possible after the rather recent commit e076ab2a2ca70a ("btrfs: shrink delalloc pages instead of full inodes"). However that creates a whole new can of worms due to new lock dependencies, which lockdep complains, like for example: [ 8948.247280] ====================================================== [ 8948.247823] WARNING: possible circular locking dependency detected [ 8948.248353] 5.17.0-rc1-btrfs-next-111 #1 Not tainted [ 8948.248786] ------------------------------------------------------ [ 8948.249320] kworker/u16:18/933570 is trying to acquire lock: [ 8948.249812] ffff9b3de1591690 (sb_internal#2){.+.+}-{0:0}, at: find_free_extent+0x141e/0x1590 [btrfs] [ 8948.250638] but task is already holding lock: [ 8948.251140] ffff9b3e09c717d8 (&root->delalloc_mutex){+.+.}-{3:3}, at: start_delalloc_inodes+0x78/0x400 [btrfs] [ 8948.252018] which lock already depends on the new lock. [ 8948.252710] the existing dependency chain (in reverse order) is: [ 8948.253343] -> #2 (&root->delalloc_mutex){+.+.}-{3:3}: [ 8948.253950] __mutex_lock+0x90/0x900 [ 8948.254354] start_delalloc_inodes+0x78/0x400 [btrfs] [ 8948.254859] btrfs_start_delalloc_roots+0x194/0x2a0 [btrfs] [ 8948.255408] btrfs_commit_transaction+0x32f/0xc00 [btrfs] [ 8948.255942] btrfs_mksubvol+0x380/0x570 [btrfs] [ 8948.256406] btrfs_mksnapshot+0x81/0xb0 [btrfs] [ 8948.256870] __btrfs_ioctl_snap_create+0x17f/0x190 [btrfs] [ 8948.257413] btrfs_ioctl_snap_create_v2+0xbb/0x140 [btrfs] [ 8948.257961] btrfs_ioctl+0x1196/0x3630 [btrfs] [ 8948.258418] __x64_sys_ioctl+0x83/0xb0 [ 8948.258793] do_syscall_64+0x3b/0xc0 [ 8948.259146] entry_SYSCALL_64_after_hwframe+0x44/0xae [ 8948.259709] -> #1 (&fs_info->delalloc_root_mutex){+.+.}-{3:3}: [ 8948.260330] __mutex_lock+0x90/0x900 [ 8948.260692] btrfs_start_delalloc_roots+0x97/0x2a0 [btrfs] [ 8948.261234] btrfs_commit_transaction+0x32f/0xc00 [btrfs] [ 8948.261766] btrfs_set_free_space_cache_v1_active+0x38/0x60 [btrfs] [ 8948.262379] btrfs_start_pre_rw_mount+0x119/0x180 [btrfs] [ 8948.262909] open_ctree+0x1511/0x171e [btrfs] [ 8948.263359] btrfs_mount_root.cold+0x12/0xde [btrfs] [ 8948.263863] legacy_get_tree+0x30/0x50 [ 8948.264242] vfs_get_tree+0x28/0xc0 [ 8948.264594] vfs_kern_mount.part.0+0x71/0xb0 [ 8948.265017] btrfs_mount+0x11d/0x3a0 [btrfs] [ 8948.265462] legacy_get_tree+0x30/0x50 [ 8948.265851] vfs_get_tree+0x28/0xc0 [ 8948.266203] path_mount+0x2d4/0xbe0 [ 8948.266554] __x64_sys_mount+0x103/0x140 [ 8948.266940] do_syscall_64+0x3b/0xc0 [ 8948.267300] entry_SYSCALL_64_after_hwframe+0x44/0xae [ 8948.267790] -> #0 (sb_internal#2){.+.+}-{0:0}: [ 8948.268322] __lock_acquire+0x12e8/0x2260 [ 8948.268733] lock_acquire+0xd7/0x310 [ 8948.269092] start_transaction+0x44c/0x6e0 [btrfs] [ 8948.269591] find_free_extent+0x141e/0x1590 [btrfs] [ 8948.270087] btrfs_reserve_extent+0x14b/0x280 [btrfs] [ 8948.270588] cow_file_range+0x17e/0x490 [btrfs] [ 8948.271051] btrfs_run_delalloc_range+0x345/0x7a0 [btrfs] [ 8948.271586] writepage_delalloc+0xb5/0x170 [btrfs] [ 8948.272071] __extent_writepage+0x156/0x3c0 [btrfs] [ 8948.272579] extent_write_cache_pages+0x263/0x460 [btrfs] [ 8948.273113] extent_writepages+0x76/0x130 [btrfs] [ 8948.273573] do_writepages+0xd2/0x1c0 [ 8948.273942] filemap_fdatawrite_wbc+0x68/0x90 [ 8948.274371] start_delalloc_inodes+0x17f/0x400 [btrfs] [ 8948.274876] btrfs_start_delalloc_roots+0x194/0x2a0 [btrfs] [ 8948.275417] flush_space+0x1f2/0x630 [btrfs] [ 8948.275863] btrfs_async_reclaim_data_space+0x108/0x1b0 [btrfs] [ 8948.276438] process_one_work+0x252/0x5a0 [ 8948.276829] worker_thread+0x55/0x3b0 [ 8948.277189] kthread+0xf2/0x120 [ 8948.277506] ret_from_fork+0x22/0x30 [ 8948.277868] other info that might help us debug this: [ 8948.278548] Chain exists of: sb_internal#2 --> &fs_info->delalloc_root_mutex --> &root->delalloc_mutex [ 8948.279601] Possible unsafe locking scenario: [ 8948.280102] CPU0 CPU1 [ 8948.280508] ---- ---- [ 8948.280915] lock(&root->delalloc_mutex); [ 8948.281271] lock(&fs_info->delalloc_root_mutex); [ 8948.281915] lock(&root->delalloc_mutex); [ 8948.282487] lock(sb_internal#2); [ 8948.282800] *** DEADLOCK *** [ 8948.283333] 4 locks held by kworker/u16:18/933570: [ 8948.283750] #0: ffff9b3dc00a9d48 ((wq_completion)events_unbound){+.+.}-{0:0}, at: process_one_work+0x1d2/0x5a0 [ 8948.284609] #1: ffffa90349dafe70 ((work_completion)(&fs_info->async_data_reclaim_work)){+.+.}-{0:0}, at: process_one_work+0x1d2/0x5a0 [ 8948.285637] #2: ffff9b3e14db5040 (&fs_info->delalloc_root_mutex){+.+.}-{3:3}, at: btrfs_start_delalloc_roots+0x97/0x2a0 [btrfs] [ 8948.286674] #3: ffff9b3e09c717d8 (&root->delalloc_mutex){+.+.}-{3:3}, at: start_delalloc_inodes+0x78/0x400 [btrfs] [ 8948.287596] stack backtrace: [ 8948.287975] CPU: 3 PID: 933570 Comm: kworker/u16:18 Not tainted 5.17.0-rc1-btrfs-next-111 #1 [ 8948.288677] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014 [ 8948.289649] Workqueue: events_unbound btrfs_async_reclaim_data_space [btrfs] [ 8948.290298] Call Trace: [ 8948.290517] <TASK> [ 8948.290700] dump_stack_lvl+0x59/0x73 [ 8948.291026] check_noncircular+0xf3/0x110 [ 8948.291375] ? start_transaction+0x228/0x6e0 [btrfs] [ 8948.291826] __lock_acquire+0x12e8/0x2260 [ 8948.292241] lock_acquire+0xd7/0x310 [ 8948.292714] ? find_free_extent+0x141e/0x1590 [btrfs] [ 8948.293241] ? lock_is_held_type+0xea/0x140 [ 8948.293601] start_transaction+0x44c/0x6e0 [btrfs] [ 8948.294055] ? find_free_extent+0x141e/0x1590 [btrfs] [ 8948.294518] find_free_extent+0x141e/0x1590 [btrfs] [ 8948.294957] ? _raw_spin_unlock+0x29/0x40 [ 8948.295312] ? btrfs_get_alloc_profile+0x124/0x290 [btrfs] [ 8948.295813] btrfs_reserve_extent+0x14b/0x280 [btrfs] [ 8948.296270] cow_file_range+0x17e/0x490 [btrfs] [ 8948.296691] btrfs_run_delalloc_range+0x345/0x7a0 [btrfs] [ 8948.297175] ? find_lock_delalloc_range+0x247/0x270 [btrfs] [ 8948.297678] writepage_delalloc+0xb5/0x170 [btrfs] [ 8948.298123] __extent_writepage+0x156/0x3c0 [btrfs] [ 8948.298570] extent_write_cache_pages+0x263/0x460 [btrfs] [ 8948.299061] extent_writepages+0x76/0x130 [btrfs] [ 8948.299495] do_writepages+0xd2/0x1c0 [ 8948.299817] ? sched_clock_cpu+0xd/0x110 [ 8948.300160] ? lock_release+0x155/0x4a0 [ 8948.300494] filemap_fdatawrite_wbc+0x68/0x90 [ 8948.300874] ? do_raw_spin_unlock+0x4b/0xa0 [ 8948.301243] start_delalloc_inodes+0x17f/0x400 [btrfs] [ 8948.301706] ? lock_release+0x155/0x4a0 [ 8948.302055] btrfs_start_delalloc_roots+0x194/0x2a0 [btrfs] [ 8948.302564] flush_space+0x1f2/0x630 [btrfs] [ 8948.302970] btrfs_async_reclaim_data_space+0x108/0x1b0 [btrfs] [ 8948.303510] process_one_work+0x252/0x5a0 [ 8948.303860] ? process_one_work+0x5a0/0x5a0 [ 8948.304221] worker_thread+0x55/0x3b0 [ 8948.304543] ? process_one_work+0x5a0/0x5a0 [ 8948.304904] kthread+0xf2/0x120 [ 8948.305184] ? kthread_complete_and_exit+0x20/0x20 [ 8948.305598] ret_from_fork+0x22/0x30 [ 8948.305921] </TASK> It all comes from the fact that btrfs_start_delalloc_roots() takes the delalloc_root_mutex, in the transaction commit path we are holding a read lock on one of the superblock's freeze semaphores (via sb_start_intwrite()), the async reclaim task can also do a call to btrfs_start_delalloc_roots(), which ends up triggering writeback with calls to filemap_fdatawrite_wbc(), resulting in extent allocation which in turn can call btrfs_start_transaction(), which will result in taking the freeze semaphore via sb_start_intwrite(), forming a nasty dependency on all those locks which can be taken in different orders by different code paths. So just adopt the simple approach of calling try_to_writeback_inodes_sb() at btrfs_start_delalloc_flush(). Link: https://lore.kernel.org/linux-btrfs/20220130005258.GA7465@cuci.nl/ Link: https://lore.kernel.org/linux-btrfs/43acc426-d683-d1b6-729d-c6bc4a2fff4d@gmail.com/ Link: https://lore.kernel.org/linux-btrfs/6833930a-08d7-6fbc-0141-eb9cdfd6bb4d@gmail.com/ Link: https://lore.kernel.org/linux-btrfs/20190322041731.GF16651@hungrycats.org/ Reviewed-by: Omar Sandoval <osandov@fb.com> Signed-off-by: Filipe Manana <fdmanana@suse.com> [ add more link reports ] Signed-off-by: David Sterba <dsterba@suse.com>
2022-02-02 23:26:09 +08:00
* We use try_to_writeback_inodes_sb() here because if we used
* btrfs_start_delalloc_roots we would deadlock with fs freeze.
* Currently are holding the fs freeze lock, if we do an async flush
* we'll do btrfs_join_transaction() and deadlock because we need to
* wait for the fs freeze lock. Using the direct flushing we benefit
* from already being in a transaction and our join_transaction doesn't
* have to re-take the fs freeze lock.
btrfs: get rid of warning on transaction commit when using flushoncommit When using the flushoncommit mount option, during almost every transaction commit we trigger a warning from __writeback_inodes_sb_nr(): $ cat fs/fs-writeback.c: (...) static void __writeback_inodes_sb_nr(struct super_block *sb, ... { (...) WARN_ON(!rwsem_is_locked(&sb->s_umount)); (...) } (...) The trace produced in dmesg looks like the following: [947.473890] WARNING: CPU: 5 PID: 930 at fs/fs-writeback.c:2610 __writeback_inodes_sb_nr+0x7e/0xb3 [947.481623] Modules linked in: nfsd nls_cp437 cifs asn1_decoder cifs_arc4 fscache cifs_md4 ipmi_ssif [947.489571] CPU: 5 PID: 930 Comm: btrfs-transacti Not tainted 95.16.3-srb-asrock-00001-g36437ad63879 #186 [947.497969] RIP: 0010:__writeback_inodes_sb_nr+0x7e/0xb3 [947.502097] Code: 24 10 4c 89 44 24 18 c6 (...) [947.519760] RSP: 0018:ffffc90000777e10 EFLAGS: 00010246 [947.523818] RAX: 0000000000000000 RBX: 0000000000963300 RCX: 0000000000000000 [947.529765] RDX: 0000000000000000 RSI: 000000000000fa51 RDI: ffffc90000777e50 [947.535740] RBP: ffff888101628a90 R08: ffff888100955800 R09: ffff888100956000 [947.541701] R10: 0000000000000002 R11: 0000000000000001 R12: ffff888100963488 [947.547645] R13: ffff888100963000 R14: ffff888112fb7200 R15: ffff888100963460 [947.553621] FS: 0000000000000000(0000) GS:ffff88841fd40000(0000) knlGS:0000000000000000 [947.560537] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [947.565122] CR2: 0000000008be50c4 CR3: 000000000220c000 CR4: 00000000001006e0 [947.571072] Call Trace: [947.572354] <TASK> [947.573266] btrfs_commit_transaction+0x1f1/0x998 [947.576785] ? start_transaction+0x3ab/0x44e [947.579867] ? schedule_timeout+0x8a/0xdd [947.582716] transaction_kthread+0xe9/0x156 [947.585721] ? btrfs_cleanup_transaction.isra.0+0x407/0x407 [947.590104] kthread+0x131/0x139 [947.592168] ? set_kthread_struct+0x32/0x32 [947.595174] ret_from_fork+0x22/0x30 [947.597561] </TASK> [947.598553] ---[ end trace 644721052755541c ]--- This is because we started using writeback_inodes_sb() to flush delalloc when committing a transaction (when using -o flushoncommit), in order to avoid deadlocks with filesystem freeze operations. This change was made by commit ce8ea7cc6eb313 ("btrfs: don't call btrfs_start_delalloc_roots in flushoncommit"). After that change we started producing that warning, and every now and then a user reports this since the warning happens too often, it spams dmesg/syslog, and a user is unsure if this reflects any problem that might compromise the filesystem's reliability. We can not just lock the sb->s_umount semaphore before calling writeback_inodes_sb(), because that would at least deadlock with filesystem freezing, since at fs/super.c:freeze_super() sync_filesystem() is called while we are holding that semaphore in write mode, and that can trigger a transaction commit, resulting in a deadlock. It would also trigger the same type of deadlock in the unmount path. Possibly, it could also introduce some other locking dependencies that lockdep would report. To fix this call try_to_writeback_inodes_sb() instead of writeback_inodes_sb(), because that will try to read lock sb->s_umount and then will only call writeback_inodes_sb() if it was able to lock it. This is fine because the cases where it can't read lock sb->s_umount are during a filesystem unmount or during a filesystem freeze - in those cases sb->s_umount is write locked and sync_filesystem() is called, which calls writeback_inodes_sb(). In other words, in all cases where we can't take a read lock on sb->s_umount, writeback is already being triggered elsewhere. An alternative would be to call btrfs_start_delalloc_roots() with a number of pages different from LONG_MAX, for example matching the number of delalloc bytes we currently have, in which case we would end up starting all delalloc with filemap_fdatawrite_wbc() and not with an async flush via filemap_flush() - that is only possible after the rather recent commit e076ab2a2ca70a ("btrfs: shrink delalloc pages instead of full inodes"). However that creates a whole new can of worms due to new lock dependencies, which lockdep complains, like for example: [ 8948.247280] ====================================================== [ 8948.247823] WARNING: possible circular locking dependency detected [ 8948.248353] 5.17.0-rc1-btrfs-next-111 #1 Not tainted [ 8948.248786] ------------------------------------------------------ [ 8948.249320] kworker/u16:18/933570 is trying to acquire lock: [ 8948.249812] ffff9b3de1591690 (sb_internal#2){.+.+}-{0:0}, at: find_free_extent+0x141e/0x1590 [btrfs] [ 8948.250638] but task is already holding lock: [ 8948.251140] ffff9b3e09c717d8 (&root->delalloc_mutex){+.+.}-{3:3}, at: start_delalloc_inodes+0x78/0x400 [btrfs] [ 8948.252018] which lock already depends on the new lock. [ 8948.252710] the existing dependency chain (in reverse order) is: [ 8948.253343] -> #2 (&root->delalloc_mutex){+.+.}-{3:3}: [ 8948.253950] __mutex_lock+0x90/0x900 [ 8948.254354] start_delalloc_inodes+0x78/0x400 [btrfs] [ 8948.254859] btrfs_start_delalloc_roots+0x194/0x2a0 [btrfs] [ 8948.255408] btrfs_commit_transaction+0x32f/0xc00 [btrfs] [ 8948.255942] btrfs_mksubvol+0x380/0x570 [btrfs] [ 8948.256406] btrfs_mksnapshot+0x81/0xb0 [btrfs] [ 8948.256870] __btrfs_ioctl_snap_create+0x17f/0x190 [btrfs] [ 8948.257413] btrfs_ioctl_snap_create_v2+0xbb/0x140 [btrfs] [ 8948.257961] btrfs_ioctl+0x1196/0x3630 [btrfs] [ 8948.258418] __x64_sys_ioctl+0x83/0xb0 [ 8948.258793] do_syscall_64+0x3b/0xc0 [ 8948.259146] entry_SYSCALL_64_after_hwframe+0x44/0xae [ 8948.259709] -> #1 (&fs_info->delalloc_root_mutex){+.+.}-{3:3}: [ 8948.260330] __mutex_lock+0x90/0x900 [ 8948.260692] btrfs_start_delalloc_roots+0x97/0x2a0 [btrfs] [ 8948.261234] btrfs_commit_transaction+0x32f/0xc00 [btrfs] [ 8948.261766] btrfs_set_free_space_cache_v1_active+0x38/0x60 [btrfs] [ 8948.262379] btrfs_start_pre_rw_mount+0x119/0x180 [btrfs] [ 8948.262909] open_ctree+0x1511/0x171e [btrfs] [ 8948.263359] btrfs_mount_root.cold+0x12/0xde [btrfs] [ 8948.263863] legacy_get_tree+0x30/0x50 [ 8948.264242] vfs_get_tree+0x28/0xc0 [ 8948.264594] vfs_kern_mount.part.0+0x71/0xb0 [ 8948.265017] btrfs_mount+0x11d/0x3a0 [btrfs] [ 8948.265462] legacy_get_tree+0x30/0x50 [ 8948.265851] vfs_get_tree+0x28/0xc0 [ 8948.266203] path_mount+0x2d4/0xbe0 [ 8948.266554] __x64_sys_mount+0x103/0x140 [ 8948.266940] do_syscall_64+0x3b/0xc0 [ 8948.267300] entry_SYSCALL_64_after_hwframe+0x44/0xae [ 8948.267790] -> #0 (sb_internal#2){.+.+}-{0:0}: [ 8948.268322] __lock_acquire+0x12e8/0x2260 [ 8948.268733] lock_acquire+0xd7/0x310 [ 8948.269092] start_transaction+0x44c/0x6e0 [btrfs] [ 8948.269591] find_free_extent+0x141e/0x1590 [btrfs] [ 8948.270087] btrfs_reserve_extent+0x14b/0x280 [btrfs] [ 8948.270588] cow_file_range+0x17e/0x490 [btrfs] [ 8948.271051] btrfs_run_delalloc_range+0x345/0x7a0 [btrfs] [ 8948.271586] writepage_delalloc+0xb5/0x170 [btrfs] [ 8948.272071] __extent_writepage+0x156/0x3c0 [btrfs] [ 8948.272579] extent_write_cache_pages+0x263/0x460 [btrfs] [ 8948.273113] extent_writepages+0x76/0x130 [btrfs] [ 8948.273573] do_writepages+0xd2/0x1c0 [ 8948.273942] filemap_fdatawrite_wbc+0x68/0x90 [ 8948.274371] start_delalloc_inodes+0x17f/0x400 [btrfs] [ 8948.274876] btrfs_start_delalloc_roots+0x194/0x2a0 [btrfs] [ 8948.275417] flush_space+0x1f2/0x630 [btrfs] [ 8948.275863] btrfs_async_reclaim_data_space+0x108/0x1b0 [btrfs] [ 8948.276438] process_one_work+0x252/0x5a0 [ 8948.276829] worker_thread+0x55/0x3b0 [ 8948.277189] kthread+0xf2/0x120 [ 8948.277506] ret_from_fork+0x22/0x30 [ 8948.277868] other info that might help us debug this: [ 8948.278548] Chain exists of: sb_internal#2 --> &fs_info->delalloc_root_mutex --> &root->delalloc_mutex [ 8948.279601] Possible unsafe locking scenario: [ 8948.280102] CPU0 CPU1 [ 8948.280508] ---- ---- [ 8948.280915] lock(&root->delalloc_mutex); [ 8948.281271] lock(&fs_info->delalloc_root_mutex); [ 8948.281915] lock(&root->delalloc_mutex); [ 8948.282487] lock(sb_internal#2); [ 8948.282800] *** DEADLOCK *** [ 8948.283333] 4 locks held by kworker/u16:18/933570: [ 8948.283750] #0: ffff9b3dc00a9d48 ((wq_completion)events_unbound){+.+.}-{0:0}, at: process_one_work+0x1d2/0x5a0 [ 8948.284609] #1: ffffa90349dafe70 ((work_completion)(&fs_info->async_data_reclaim_work)){+.+.}-{0:0}, at: process_one_work+0x1d2/0x5a0 [ 8948.285637] #2: ffff9b3e14db5040 (&fs_info->delalloc_root_mutex){+.+.}-{3:3}, at: btrfs_start_delalloc_roots+0x97/0x2a0 [btrfs] [ 8948.286674] #3: ffff9b3e09c717d8 (&root->delalloc_mutex){+.+.}-{3:3}, at: start_delalloc_inodes+0x78/0x400 [btrfs] [ 8948.287596] stack backtrace: [ 8948.287975] CPU: 3 PID: 933570 Comm: kworker/u16:18 Not tainted 5.17.0-rc1-btrfs-next-111 #1 [ 8948.288677] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014 [ 8948.289649] Workqueue: events_unbound btrfs_async_reclaim_data_space [btrfs] [ 8948.290298] Call Trace: [ 8948.290517] <TASK> [ 8948.290700] dump_stack_lvl+0x59/0x73 [ 8948.291026] check_noncircular+0xf3/0x110 [ 8948.291375] ? start_transaction+0x228/0x6e0 [btrfs] [ 8948.291826] __lock_acquire+0x12e8/0x2260 [ 8948.292241] lock_acquire+0xd7/0x310 [ 8948.292714] ? find_free_extent+0x141e/0x1590 [btrfs] [ 8948.293241] ? lock_is_held_type+0xea/0x140 [ 8948.293601] start_transaction+0x44c/0x6e0 [btrfs] [ 8948.294055] ? find_free_extent+0x141e/0x1590 [btrfs] [ 8948.294518] find_free_extent+0x141e/0x1590 [btrfs] [ 8948.294957] ? _raw_spin_unlock+0x29/0x40 [ 8948.295312] ? btrfs_get_alloc_profile+0x124/0x290 [btrfs] [ 8948.295813] btrfs_reserve_extent+0x14b/0x280 [btrfs] [ 8948.296270] cow_file_range+0x17e/0x490 [btrfs] [ 8948.296691] btrfs_run_delalloc_range+0x345/0x7a0 [btrfs] [ 8948.297175] ? find_lock_delalloc_range+0x247/0x270 [btrfs] [ 8948.297678] writepage_delalloc+0xb5/0x170 [btrfs] [ 8948.298123] __extent_writepage+0x156/0x3c0 [btrfs] [ 8948.298570] extent_write_cache_pages+0x263/0x460 [btrfs] [ 8948.299061] extent_writepages+0x76/0x130 [btrfs] [ 8948.299495] do_writepages+0xd2/0x1c0 [ 8948.299817] ? sched_clock_cpu+0xd/0x110 [ 8948.300160] ? lock_release+0x155/0x4a0 [ 8948.300494] filemap_fdatawrite_wbc+0x68/0x90 [ 8948.300874] ? do_raw_spin_unlock+0x4b/0xa0 [ 8948.301243] start_delalloc_inodes+0x17f/0x400 [btrfs] [ 8948.301706] ? lock_release+0x155/0x4a0 [ 8948.302055] btrfs_start_delalloc_roots+0x194/0x2a0 [btrfs] [ 8948.302564] flush_space+0x1f2/0x630 [btrfs] [ 8948.302970] btrfs_async_reclaim_data_space+0x108/0x1b0 [btrfs] [ 8948.303510] process_one_work+0x252/0x5a0 [ 8948.303860] ? process_one_work+0x5a0/0x5a0 [ 8948.304221] worker_thread+0x55/0x3b0 [ 8948.304543] ? process_one_work+0x5a0/0x5a0 [ 8948.304904] kthread+0xf2/0x120 [ 8948.305184] ? kthread_complete_and_exit+0x20/0x20 [ 8948.305598] ret_from_fork+0x22/0x30 [ 8948.305921] </TASK> It all comes from the fact that btrfs_start_delalloc_roots() takes the delalloc_root_mutex, in the transaction commit path we are holding a read lock on one of the superblock's freeze semaphores (via sb_start_intwrite()), the async reclaim task can also do a call to btrfs_start_delalloc_roots(), which ends up triggering writeback with calls to filemap_fdatawrite_wbc(), resulting in extent allocation which in turn can call btrfs_start_transaction(), which will result in taking the freeze semaphore via sb_start_intwrite(), forming a nasty dependency on all those locks which can be taken in different orders by different code paths. So just adopt the simple approach of calling try_to_writeback_inodes_sb() at btrfs_start_delalloc_flush(). Link: https://lore.kernel.org/linux-btrfs/20220130005258.GA7465@cuci.nl/ Link: https://lore.kernel.org/linux-btrfs/43acc426-d683-d1b6-729d-c6bc4a2fff4d@gmail.com/ Link: https://lore.kernel.org/linux-btrfs/6833930a-08d7-6fbc-0141-eb9cdfd6bb4d@gmail.com/ Link: https://lore.kernel.org/linux-btrfs/20190322041731.GF16651@hungrycats.org/ Reviewed-by: Omar Sandoval <osandov@fb.com> Signed-off-by: Filipe Manana <fdmanana@suse.com> [ add more link reports ] Signed-off-by: David Sterba <dsterba@suse.com>
2022-02-02 23:26:09 +08:00
*
* Note that try_to_writeback_inodes_sb() will only trigger writeback
* if it can read lock sb->s_umount. It will always be able to lock it,
* except when the filesystem is being unmounted or being frozen, but in
* those cases sync_filesystem() is called, which results in calling
* writeback_inodes_sb() while holding a write lock on sb->s_umount.
* Note that we don't call writeback_inodes_sb() directly, because it
* will emit a warning if sb->s_umount is not locked.
*/
if (btrfs_test_opt(fs_info, FLUSHONCOMMIT))
btrfs: get rid of warning on transaction commit when using flushoncommit When using the flushoncommit mount option, during almost every transaction commit we trigger a warning from __writeback_inodes_sb_nr(): $ cat fs/fs-writeback.c: (...) static void __writeback_inodes_sb_nr(struct super_block *sb, ... { (...) WARN_ON(!rwsem_is_locked(&sb->s_umount)); (...) } (...) The trace produced in dmesg looks like the following: [947.473890] WARNING: CPU: 5 PID: 930 at fs/fs-writeback.c:2610 __writeback_inodes_sb_nr+0x7e/0xb3 [947.481623] Modules linked in: nfsd nls_cp437 cifs asn1_decoder cifs_arc4 fscache cifs_md4 ipmi_ssif [947.489571] CPU: 5 PID: 930 Comm: btrfs-transacti Not tainted 95.16.3-srb-asrock-00001-g36437ad63879 #186 [947.497969] RIP: 0010:__writeback_inodes_sb_nr+0x7e/0xb3 [947.502097] Code: 24 10 4c 89 44 24 18 c6 (...) [947.519760] RSP: 0018:ffffc90000777e10 EFLAGS: 00010246 [947.523818] RAX: 0000000000000000 RBX: 0000000000963300 RCX: 0000000000000000 [947.529765] RDX: 0000000000000000 RSI: 000000000000fa51 RDI: ffffc90000777e50 [947.535740] RBP: ffff888101628a90 R08: ffff888100955800 R09: ffff888100956000 [947.541701] R10: 0000000000000002 R11: 0000000000000001 R12: ffff888100963488 [947.547645] R13: ffff888100963000 R14: ffff888112fb7200 R15: ffff888100963460 [947.553621] FS: 0000000000000000(0000) GS:ffff88841fd40000(0000) knlGS:0000000000000000 [947.560537] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [947.565122] CR2: 0000000008be50c4 CR3: 000000000220c000 CR4: 00000000001006e0 [947.571072] Call Trace: [947.572354] <TASK> [947.573266] btrfs_commit_transaction+0x1f1/0x998 [947.576785] ? start_transaction+0x3ab/0x44e [947.579867] ? schedule_timeout+0x8a/0xdd [947.582716] transaction_kthread+0xe9/0x156 [947.585721] ? btrfs_cleanup_transaction.isra.0+0x407/0x407 [947.590104] kthread+0x131/0x139 [947.592168] ? set_kthread_struct+0x32/0x32 [947.595174] ret_from_fork+0x22/0x30 [947.597561] </TASK> [947.598553] ---[ end trace 644721052755541c ]--- This is because we started using writeback_inodes_sb() to flush delalloc when committing a transaction (when using -o flushoncommit), in order to avoid deadlocks with filesystem freeze operations. This change was made by commit ce8ea7cc6eb313 ("btrfs: don't call btrfs_start_delalloc_roots in flushoncommit"). After that change we started producing that warning, and every now and then a user reports this since the warning happens too often, it spams dmesg/syslog, and a user is unsure if this reflects any problem that might compromise the filesystem's reliability. We can not just lock the sb->s_umount semaphore before calling writeback_inodes_sb(), because that would at least deadlock with filesystem freezing, since at fs/super.c:freeze_super() sync_filesystem() is called while we are holding that semaphore in write mode, and that can trigger a transaction commit, resulting in a deadlock. It would also trigger the same type of deadlock in the unmount path. Possibly, it could also introduce some other locking dependencies that lockdep would report. To fix this call try_to_writeback_inodes_sb() instead of writeback_inodes_sb(), because that will try to read lock sb->s_umount and then will only call writeback_inodes_sb() if it was able to lock it. This is fine because the cases where it can't read lock sb->s_umount are during a filesystem unmount or during a filesystem freeze - in those cases sb->s_umount is write locked and sync_filesystem() is called, which calls writeback_inodes_sb(). In other words, in all cases where we can't take a read lock on sb->s_umount, writeback is already being triggered elsewhere. An alternative would be to call btrfs_start_delalloc_roots() with a number of pages different from LONG_MAX, for example matching the number of delalloc bytes we currently have, in which case we would end up starting all delalloc with filemap_fdatawrite_wbc() and not with an async flush via filemap_flush() - that is only possible after the rather recent commit e076ab2a2ca70a ("btrfs: shrink delalloc pages instead of full inodes"). However that creates a whole new can of worms due to new lock dependencies, which lockdep complains, like for example: [ 8948.247280] ====================================================== [ 8948.247823] WARNING: possible circular locking dependency detected [ 8948.248353] 5.17.0-rc1-btrfs-next-111 #1 Not tainted [ 8948.248786] ------------------------------------------------------ [ 8948.249320] kworker/u16:18/933570 is trying to acquire lock: [ 8948.249812] ffff9b3de1591690 (sb_internal#2){.+.+}-{0:0}, at: find_free_extent+0x141e/0x1590 [btrfs] [ 8948.250638] but task is already holding lock: [ 8948.251140] ffff9b3e09c717d8 (&root->delalloc_mutex){+.+.}-{3:3}, at: start_delalloc_inodes+0x78/0x400 [btrfs] [ 8948.252018] which lock already depends on the new lock. [ 8948.252710] the existing dependency chain (in reverse order) is: [ 8948.253343] -> #2 (&root->delalloc_mutex){+.+.}-{3:3}: [ 8948.253950] __mutex_lock+0x90/0x900 [ 8948.254354] start_delalloc_inodes+0x78/0x400 [btrfs] [ 8948.254859] btrfs_start_delalloc_roots+0x194/0x2a0 [btrfs] [ 8948.255408] btrfs_commit_transaction+0x32f/0xc00 [btrfs] [ 8948.255942] btrfs_mksubvol+0x380/0x570 [btrfs] [ 8948.256406] btrfs_mksnapshot+0x81/0xb0 [btrfs] [ 8948.256870] __btrfs_ioctl_snap_create+0x17f/0x190 [btrfs] [ 8948.257413] btrfs_ioctl_snap_create_v2+0xbb/0x140 [btrfs] [ 8948.257961] btrfs_ioctl+0x1196/0x3630 [btrfs] [ 8948.258418] __x64_sys_ioctl+0x83/0xb0 [ 8948.258793] do_syscall_64+0x3b/0xc0 [ 8948.259146] entry_SYSCALL_64_after_hwframe+0x44/0xae [ 8948.259709] -> #1 (&fs_info->delalloc_root_mutex){+.+.}-{3:3}: [ 8948.260330] __mutex_lock+0x90/0x900 [ 8948.260692] btrfs_start_delalloc_roots+0x97/0x2a0 [btrfs] [ 8948.261234] btrfs_commit_transaction+0x32f/0xc00 [btrfs] [ 8948.261766] btrfs_set_free_space_cache_v1_active+0x38/0x60 [btrfs] [ 8948.262379] btrfs_start_pre_rw_mount+0x119/0x180 [btrfs] [ 8948.262909] open_ctree+0x1511/0x171e [btrfs] [ 8948.263359] btrfs_mount_root.cold+0x12/0xde [btrfs] [ 8948.263863] legacy_get_tree+0x30/0x50 [ 8948.264242] vfs_get_tree+0x28/0xc0 [ 8948.264594] vfs_kern_mount.part.0+0x71/0xb0 [ 8948.265017] btrfs_mount+0x11d/0x3a0 [btrfs] [ 8948.265462] legacy_get_tree+0x30/0x50 [ 8948.265851] vfs_get_tree+0x28/0xc0 [ 8948.266203] path_mount+0x2d4/0xbe0 [ 8948.266554] __x64_sys_mount+0x103/0x140 [ 8948.266940] do_syscall_64+0x3b/0xc0 [ 8948.267300] entry_SYSCALL_64_after_hwframe+0x44/0xae [ 8948.267790] -> #0 (sb_internal#2){.+.+}-{0:0}: [ 8948.268322] __lock_acquire+0x12e8/0x2260 [ 8948.268733] lock_acquire+0xd7/0x310 [ 8948.269092] start_transaction+0x44c/0x6e0 [btrfs] [ 8948.269591] find_free_extent+0x141e/0x1590 [btrfs] [ 8948.270087] btrfs_reserve_extent+0x14b/0x280 [btrfs] [ 8948.270588] cow_file_range+0x17e/0x490 [btrfs] [ 8948.271051] btrfs_run_delalloc_range+0x345/0x7a0 [btrfs] [ 8948.271586] writepage_delalloc+0xb5/0x170 [btrfs] [ 8948.272071] __extent_writepage+0x156/0x3c0 [btrfs] [ 8948.272579] extent_write_cache_pages+0x263/0x460 [btrfs] [ 8948.273113] extent_writepages+0x76/0x130 [btrfs] [ 8948.273573] do_writepages+0xd2/0x1c0 [ 8948.273942] filemap_fdatawrite_wbc+0x68/0x90 [ 8948.274371] start_delalloc_inodes+0x17f/0x400 [btrfs] [ 8948.274876] btrfs_start_delalloc_roots+0x194/0x2a0 [btrfs] [ 8948.275417] flush_space+0x1f2/0x630 [btrfs] [ 8948.275863] btrfs_async_reclaim_data_space+0x108/0x1b0 [btrfs] [ 8948.276438] process_one_work+0x252/0x5a0 [ 8948.276829] worker_thread+0x55/0x3b0 [ 8948.277189] kthread+0xf2/0x120 [ 8948.277506] ret_from_fork+0x22/0x30 [ 8948.277868] other info that might help us debug this: [ 8948.278548] Chain exists of: sb_internal#2 --> &fs_info->delalloc_root_mutex --> &root->delalloc_mutex [ 8948.279601] Possible unsafe locking scenario: [ 8948.280102] CPU0 CPU1 [ 8948.280508] ---- ---- [ 8948.280915] lock(&root->delalloc_mutex); [ 8948.281271] lock(&fs_info->delalloc_root_mutex); [ 8948.281915] lock(&root->delalloc_mutex); [ 8948.282487] lock(sb_internal#2); [ 8948.282800] *** DEADLOCK *** [ 8948.283333] 4 locks held by kworker/u16:18/933570: [ 8948.283750] #0: ffff9b3dc00a9d48 ((wq_completion)events_unbound){+.+.}-{0:0}, at: process_one_work+0x1d2/0x5a0 [ 8948.284609] #1: ffffa90349dafe70 ((work_completion)(&fs_info->async_data_reclaim_work)){+.+.}-{0:0}, at: process_one_work+0x1d2/0x5a0 [ 8948.285637] #2: ffff9b3e14db5040 (&fs_info->delalloc_root_mutex){+.+.}-{3:3}, at: btrfs_start_delalloc_roots+0x97/0x2a0 [btrfs] [ 8948.286674] #3: ffff9b3e09c717d8 (&root->delalloc_mutex){+.+.}-{3:3}, at: start_delalloc_inodes+0x78/0x400 [btrfs] [ 8948.287596] stack backtrace: [ 8948.287975] CPU: 3 PID: 933570 Comm: kworker/u16:18 Not tainted 5.17.0-rc1-btrfs-next-111 #1 [ 8948.288677] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014 [ 8948.289649] Workqueue: events_unbound btrfs_async_reclaim_data_space [btrfs] [ 8948.290298] Call Trace: [ 8948.290517] <TASK> [ 8948.290700] dump_stack_lvl+0x59/0x73 [ 8948.291026] check_noncircular+0xf3/0x110 [ 8948.291375] ? start_transaction+0x228/0x6e0 [btrfs] [ 8948.291826] __lock_acquire+0x12e8/0x2260 [ 8948.292241] lock_acquire+0xd7/0x310 [ 8948.292714] ? find_free_extent+0x141e/0x1590 [btrfs] [ 8948.293241] ? lock_is_held_type+0xea/0x140 [ 8948.293601] start_transaction+0x44c/0x6e0 [btrfs] [ 8948.294055] ? find_free_extent+0x141e/0x1590 [btrfs] [ 8948.294518] find_free_extent+0x141e/0x1590 [btrfs] [ 8948.294957] ? _raw_spin_unlock+0x29/0x40 [ 8948.295312] ? btrfs_get_alloc_profile+0x124/0x290 [btrfs] [ 8948.295813] btrfs_reserve_extent+0x14b/0x280 [btrfs] [ 8948.296270] cow_file_range+0x17e/0x490 [btrfs] [ 8948.296691] btrfs_run_delalloc_range+0x345/0x7a0 [btrfs] [ 8948.297175] ? find_lock_delalloc_range+0x247/0x270 [btrfs] [ 8948.297678] writepage_delalloc+0xb5/0x170 [btrfs] [ 8948.298123] __extent_writepage+0x156/0x3c0 [btrfs] [ 8948.298570] extent_write_cache_pages+0x263/0x460 [btrfs] [ 8948.299061] extent_writepages+0x76/0x130 [btrfs] [ 8948.299495] do_writepages+0xd2/0x1c0 [ 8948.299817] ? sched_clock_cpu+0xd/0x110 [ 8948.300160] ? lock_release+0x155/0x4a0 [ 8948.300494] filemap_fdatawrite_wbc+0x68/0x90 [ 8948.300874] ? do_raw_spin_unlock+0x4b/0xa0 [ 8948.301243] start_delalloc_inodes+0x17f/0x400 [btrfs] [ 8948.301706] ? lock_release+0x155/0x4a0 [ 8948.302055] btrfs_start_delalloc_roots+0x194/0x2a0 [btrfs] [ 8948.302564] flush_space+0x1f2/0x630 [btrfs] [ 8948.302970] btrfs_async_reclaim_data_space+0x108/0x1b0 [btrfs] [ 8948.303510] process_one_work+0x252/0x5a0 [ 8948.303860] ? process_one_work+0x5a0/0x5a0 [ 8948.304221] worker_thread+0x55/0x3b0 [ 8948.304543] ? process_one_work+0x5a0/0x5a0 [ 8948.304904] kthread+0xf2/0x120 [ 8948.305184] ? kthread_complete_and_exit+0x20/0x20 [ 8948.305598] ret_from_fork+0x22/0x30 [ 8948.305921] </TASK> It all comes from the fact that btrfs_start_delalloc_roots() takes the delalloc_root_mutex, in the transaction commit path we are holding a read lock on one of the superblock's freeze semaphores (via sb_start_intwrite()), the async reclaim task can also do a call to btrfs_start_delalloc_roots(), which ends up triggering writeback with calls to filemap_fdatawrite_wbc(), resulting in extent allocation which in turn can call btrfs_start_transaction(), which will result in taking the freeze semaphore via sb_start_intwrite(), forming a nasty dependency on all those locks which can be taken in different orders by different code paths. So just adopt the simple approach of calling try_to_writeback_inodes_sb() at btrfs_start_delalloc_flush(). Link: https://lore.kernel.org/linux-btrfs/20220130005258.GA7465@cuci.nl/ Link: https://lore.kernel.org/linux-btrfs/43acc426-d683-d1b6-729d-c6bc4a2fff4d@gmail.com/ Link: https://lore.kernel.org/linux-btrfs/6833930a-08d7-6fbc-0141-eb9cdfd6bb4d@gmail.com/ Link: https://lore.kernel.org/linux-btrfs/20190322041731.GF16651@hungrycats.org/ Reviewed-by: Omar Sandoval <osandov@fb.com> Signed-off-by: Filipe Manana <fdmanana@suse.com> [ add more link reports ] Signed-off-by: David Sterba <dsterba@suse.com>
2022-02-02 23:26:09 +08:00
try_to_writeback_inodes_sb(fs_info->sb, WB_REASON_SYNC);
return 0;
}
static inline void btrfs_wait_delalloc_flush(struct btrfs_fs_info *fs_info)
{
if (btrfs_test_opt(fs_info, FLUSHONCOMMIT))
btrfs_wait_ordered_roots(fs_info, U64_MAX, 0, (u64)-1);
}
btrfs: fix use-after-free after failure to create a snapshot At ioctl.c:create_snapshot(), we allocate a pending snapshot structure and then attach it to the transaction's list of pending snapshots. After that we call btrfs_commit_transaction(), and if that returns an error we jump to 'fail' label, where we kfree() the pending snapshot structure. This can result in a later use-after-free of the pending snapshot: 1) We allocated the pending snapshot and added it to the transaction's list of pending snapshots; 2) We call btrfs_commit_transaction(), and it fails either at the first call to btrfs_run_delayed_refs() or btrfs_start_dirty_block_groups(). In both cases, we don't abort the transaction and we release our transaction handle. We jump to the 'fail' label and free the pending snapshot structure. We return with the pending snapshot still in the transaction's list; 3) Another task commits the transaction. This time there's no error at all, and then during the transaction commit it accesses a pointer to the pending snapshot structure that the snapshot creation task has already freed, resulting in a user-after-free. This issue could actually be detected by smatch, which produced the following warning: fs/btrfs/ioctl.c:843 create_snapshot() warn: '&pending_snapshot->list' not removed from list So fix this by not having the snapshot creation ioctl directly add the pending snapshot to the transaction's list. Instead add the pending snapshot to the transaction handle, and then at btrfs_commit_transaction() we add the snapshot to the list only when we can guarantee that any error returned after that point will result in a transaction abort, in which case the ioctl code can safely free the pending snapshot and no one can access it anymore. CC: stable@vger.kernel.org # 5.10+ Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2022-01-21 23:44:39 +08:00
/*
* Add a pending snapshot associated with the given transaction handle to the
* respective handle. This must be called after the transaction commit started
* and while holding fs_info->trans_lock.
* This serves to guarantee a caller of btrfs_commit_transaction() that it can
* safely free the pending snapshot pointer in case btrfs_commit_transaction()
* returns an error.
*/
static void add_pending_snapshot(struct btrfs_trans_handle *trans)
{
struct btrfs_transaction *cur_trans = trans->transaction;
if (!trans->pending_snapshot)
return;
lockdep_assert_held(&trans->fs_info->trans_lock);
ASSERT(cur_trans->state >= TRANS_STATE_COMMIT_START);
list_add(&trans->pending_snapshot->list, &cur_trans->pending_snapshots);
}
int btrfs_commit_transaction(struct btrfs_trans_handle *trans)
{
struct btrfs_fs_info *fs_info = trans->fs_info;
struct btrfs_transaction *cur_trans = trans->transaction;
struct btrfs_transaction *prev_trans = NULL;
int ret;
ASSERT(refcount_read(&trans->use_count) == 1);
/* Stop the commit early if ->aborted is set */
if (TRANS_ABORTED(cur_trans)) {
ret = cur_trans->aborted;
btrfs_end_transaction(trans);
return ret;
}
btrfs_trans_release_metadata(trans);
trans->block_rsv = NULL;
Btrfs: do extent allocation and reference count updates in the background The extent allocation tree maintains a reference count and full back reference information for every extent allocated in the filesystem. For subvolume and snapshot trees, every time a block goes through COW, the new copy of the block adds a reference on every block it points to. If a btree node points to 150 leaves, then the COW code needs to go and add backrefs on 150 different extents, which might be spread all over the extent allocation tree. These updates currently happen during btrfs_cow_block, and most COWs happen during btrfs_search_slot. btrfs_search_slot has locks held on both the parent and the node we are COWing, and so we really want to avoid IO during the COW if we can. This commit adds an rbtree of pending reference count updates and extent allocations. The tree is ordered by byte number of the extent and byte number of the parent for the back reference. The tree allows us to: 1) Modify back references in something close to disk order, reducing seeks 2) Significantly reduce the number of modifications made as block pointers are balanced around 3) Do all of the extent insertion and back reference modifications outside of the performance critical btrfs_search_slot code. #3 has the added benefit of greatly reducing the btrfs stack footprint. The extent allocation tree modifications are done without the deep (and somewhat recursive) call chains used in the past. These delayed back reference updates must be done before the transaction commits, and so the rbtree is tied to the transaction. Throttling is implemented to help keep the queue of backrefs at a reasonable size. Since there was a similar mechanism in place for the extent tree extents, that is removed and replaced by the delayed reference tree. Yan Zheng <yan.zheng@oracle.com> helped review and fixup this code. Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-03-13 22:10:06 +08:00
/*
btrfs: only let one thread pre-flush delayed refs in commit I've been running a stress test that runs 20 workers in their own subvolume, which are running an fsstress instance with 4 threads per worker, which is 80 total fsstress threads. In addition to this I'm running balance in the background as well as creating and deleting snapshots. This test takes around 12 hours to run normally, going slower and slower as the test goes on. The reason for this is because fsstress is running fsync sometimes, and because we're messing with block groups we often fall through to btrfs_commit_transaction, so will often have 20-30 threads all calling btrfs_commit_transaction at the same time. These all get stuck contending on the extent tree while they try to run delayed refs during the initial part of the commit. This is suboptimal, really because the extent tree is a single point of failure we only want one thread acting on that tree at once to reduce lock contention. Fix this by making the flushing mechanism a bit operation, to make it easy to use test_and_set_bit() in order to make sure only one task does this initial flush. Once we're into the transaction commit we only have one thread doing delayed ref running, it's just this initial pre-flush that is problematic. With this patch my stress test takes around 90 minutes to run, instead of 12 hours. The memory barrier is not necessary for the flushing bit as it's ordered, unlike plain int. The transaction state accessed in btrfs_should_end_transaction could be affected by that too as it's not always used under transaction lock. Upon Nikolay's analysis in [1] it's not necessary: In should_end_transaction it's read without holding any locks. (U) It's modified in btrfs_cleanup_transaction without holding the fs_info->trans_lock (U), but the STATE_ERROR flag is going to be set. set in cleanup_transaction under fs_info->trans_lock (L) set in btrfs_commit_trans to COMMIT_START under fs_info->trans_lock.(L) set in btrfs_commit_trans to COMMIT_DOING under fs_info->trans_lock.(L) set in btrfs_commit_trans to COMMIT_UNBLOCK under fs_info->trans_lock.(L) set in btrfs_commit_trans to COMMIT_COMPLETED without locks but at this point the transaction is finished and fs_info->running_trans is NULL (U but irrelevant). So by the looks of it we can have a concurrent READ race with a WRITE, due to reads not taking a lock. In this case what we want to ensure is we either see new or old state. I consulted with Will Deacon and he said that in such a case we'd want to annotate the accesses to ->state with (READ|WRITE)_ONCE so as to avoid a theoretical tear, in this case I don't think this could happen but I imagine at some point KCSAN would flag such an access as racy (which it is). [1] https://lore.kernel.org/linux-btrfs/e1fd5cc1-0f28-f670-69f4-e9958b4964e6@suse.com Reviewed-by: Nikolay Borisov <nborisov@suse.com> Signed-off-by: Josef Bacik <josef@toxicpanda.com> [ add comments regarding memory barrier ] Signed-off-by: David Sterba <dsterba@suse.com>
2020-12-19 03:24:20 +08:00
* We only want one transaction commit doing the flushing so we do not
* waste a bunch of time on lock contention on the extent root node.
Btrfs: do extent allocation and reference count updates in the background The extent allocation tree maintains a reference count and full back reference information for every extent allocated in the filesystem. For subvolume and snapshot trees, every time a block goes through COW, the new copy of the block adds a reference on every block it points to. If a btree node points to 150 leaves, then the COW code needs to go and add backrefs on 150 different extents, which might be spread all over the extent allocation tree. These updates currently happen during btrfs_cow_block, and most COWs happen during btrfs_search_slot. btrfs_search_slot has locks held on both the parent and the node we are COWing, and so we really want to avoid IO during the COW if we can. This commit adds an rbtree of pending reference count updates and extent allocations. The tree is ordered by byte number of the extent and byte number of the parent for the back reference. The tree allows us to: 1) Modify back references in something close to disk order, reducing seeks 2) Significantly reduce the number of modifications made as block pointers are balanced around 3) Do all of the extent insertion and back reference modifications outside of the performance critical btrfs_search_slot code. #3 has the added benefit of greatly reducing the btrfs stack footprint. The extent allocation tree modifications are done without the deep (and somewhat recursive) call chains used in the past. These delayed back reference updates must be done before the transaction commits, and so the rbtree is tied to the transaction. Throttling is implemented to help keep the queue of backrefs at a reasonable size. Since there was a similar mechanism in place for the extent tree extents, that is removed and replaced by the delayed reference tree. Yan Zheng <yan.zheng@oracle.com> helped review and fixup this code. Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-03-13 22:10:06 +08:00
*/
btrfs: only let one thread pre-flush delayed refs in commit I've been running a stress test that runs 20 workers in their own subvolume, which are running an fsstress instance with 4 threads per worker, which is 80 total fsstress threads. In addition to this I'm running balance in the background as well as creating and deleting snapshots. This test takes around 12 hours to run normally, going slower and slower as the test goes on. The reason for this is because fsstress is running fsync sometimes, and because we're messing with block groups we often fall through to btrfs_commit_transaction, so will often have 20-30 threads all calling btrfs_commit_transaction at the same time. These all get stuck contending on the extent tree while they try to run delayed refs during the initial part of the commit. This is suboptimal, really because the extent tree is a single point of failure we only want one thread acting on that tree at once to reduce lock contention. Fix this by making the flushing mechanism a bit operation, to make it easy to use test_and_set_bit() in order to make sure only one task does this initial flush. Once we're into the transaction commit we only have one thread doing delayed ref running, it's just this initial pre-flush that is problematic. With this patch my stress test takes around 90 minutes to run, instead of 12 hours. The memory barrier is not necessary for the flushing bit as it's ordered, unlike plain int. The transaction state accessed in btrfs_should_end_transaction could be affected by that too as it's not always used under transaction lock. Upon Nikolay's analysis in [1] it's not necessary: In should_end_transaction it's read without holding any locks. (U) It's modified in btrfs_cleanup_transaction without holding the fs_info->trans_lock (U), but the STATE_ERROR flag is going to be set. set in cleanup_transaction under fs_info->trans_lock (L) set in btrfs_commit_trans to COMMIT_START under fs_info->trans_lock.(L) set in btrfs_commit_trans to COMMIT_DOING under fs_info->trans_lock.(L) set in btrfs_commit_trans to COMMIT_UNBLOCK under fs_info->trans_lock.(L) set in btrfs_commit_trans to COMMIT_COMPLETED without locks but at this point the transaction is finished and fs_info->running_trans is NULL (U but irrelevant). So by the looks of it we can have a concurrent READ race with a WRITE, due to reads not taking a lock. In this case what we want to ensure is we either see new or old state. I consulted with Will Deacon and he said that in such a case we'd want to annotate the accesses to ->state with (READ|WRITE)_ONCE so as to avoid a theoretical tear, in this case I don't think this could happen but I imagine at some point KCSAN would flag such an access as racy (which it is). [1] https://lore.kernel.org/linux-btrfs/e1fd5cc1-0f28-f670-69f4-e9958b4964e6@suse.com Reviewed-by: Nikolay Borisov <nborisov@suse.com> Signed-off-by: Josef Bacik <josef@toxicpanda.com> [ add comments regarding memory barrier ] Signed-off-by: David Sterba <dsterba@suse.com>
2020-12-19 03:24:20 +08:00
if (!test_and_set_bit(BTRFS_DELAYED_REFS_FLUSHING,
&cur_trans->delayed_refs.flags)) {
/*
* Make a pass through all the delayed refs we have so far.
* Any running threads may add more while we are here.
*/
ret = btrfs_run_delayed_refs(trans, 0);
if (ret) {
btrfs_end_transaction(trans);
return ret;
}
}
Btrfs: do extent allocation and reference count updates in the background The extent allocation tree maintains a reference count and full back reference information for every extent allocated in the filesystem. For subvolume and snapshot trees, every time a block goes through COW, the new copy of the block adds a reference on every block it points to. If a btree node points to 150 leaves, then the COW code needs to go and add backrefs on 150 different extents, which might be spread all over the extent allocation tree. These updates currently happen during btrfs_cow_block, and most COWs happen during btrfs_search_slot. btrfs_search_slot has locks held on both the parent and the node we are COWing, and so we really want to avoid IO during the COW if we can. This commit adds an rbtree of pending reference count updates and extent allocations. The tree is ordered by byte number of the extent and byte number of the parent for the back reference. The tree allows us to: 1) Modify back references in something close to disk order, reducing seeks 2) Significantly reduce the number of modifications made as block pointers are balanced around 3) Do all of the extent insertion and back reference modifications outside of the performance critical btrfs_search_slot code. #3 has the added benefit of greatly reducing the btrfs stack footprint. The extent allocation tree modifications are done without the deep (and somewhat recursive) call chains used in the past. These delayed back reference updates must be done before the transaction commits, and so the rbtree is tied to the transaction. Throttling is implemented to help keep the queue of backrefs at a reasonable size. Since there was a similar mechanism in place for the extent tree extents, that is removed and replaced by the delayed reference tree. Yan Zheng <yan.zheng@oracle.com> helped review and fixup this code. Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-03-13 22:10:06 +08:00
btrfs_create_pending_block_groups(trans);
if (!test_bit(BTRFS_TRANS_DIRTY_BG_RUN, &cur_trans->flags)) {
int run_it = 0;
/* this mutex is also taken before trying to set
* block groups readonly. We need to make sure
* that nobody has set a block group readonly
* after a extents from that block group have been
* allocated for cache files. btrfs_set_block_group_ro
* will wait for the transaction to commit if it
* finds BTRFS_TRANS_DIRTY_BG_RUN set.
*
* The BTRFS_TRANS_DIRTY_BG_RUN flag is also used to make sure
* only one process starts all the block group IO. It wouldn't
* hurt to have more than one go through, but there's no
* real advantage to it either.
*/
mutex_lock(&fs_info->ro_block_group_mutex);
if (!test_and_set_bit(BTRFS_TRANS_DIRTY_BG_RUN,
&cur_trans->flags))
run_it = 1;
mutex_unlock(&fs_info->ro_block_group_mutex);
if (run_it) {
ret = btrfs_start_dirty_block_groups(trans);
if (ret) {
btrfs_end_transaction(trans);
return ret;
}
}
}
spin_lock(&fs_info->trans_lock);
Btrfs: make the state of the transaction more readable We used 3 variants to track the state of the transaction, it was complex and wasted the memory space. Besides that, it was hard to understand that which types of the transaction handles should be blocked in each transaction state, so the developers often made mistakes. This patch improved the above problem. In this patch, we define 6 states for the transaction, enum btrfs_trans_state { TRANS_STATE_RUNNING = 0, TRANS_STATE_BLOCKED = 1, TRANS_STATE_COMMIT_START = 2, TRANS_STATE_COMMIT_DOING = 3, TRANS_STATE_UNBLOCKED = 4, TRANS_STATE_COMPLETED = 5, TRANS_STATE_MAX = 6, } and just use 1 variant to track those state. In order to make the blocked handle types for each state more clear, we introduce a array: unsigned int btrfs_blocked_trans_types[TRANS_STATE_MAX] = { [TRANS_STATE_RUNNING] = 0U, [TRANS_STATE_BLOCKED] = (__TRANS_USERSPACE | __TRANS_START), [TRANS_STATE_COMMIT_START] = (__TRANS_USERSPACE | __TRANS_START | __TRANS_ATTACH), [TRANS_STATE_COMMIT_DOING] = (__TRANS_USERSPACE | __TRANS_START | __TRANS_ATTACH | __TRANS_JOIN), [TRANS_STATE_UNBLOCKED] = (__TRANS_USERSPACE | __TRANS_START | __TRANS_ATTACH | __TRANS_JOIN | __TRANS_JOIN_NOLOCK), [TRANS_STATE_COMPLETED] = (__TRANS_USERSPACE | __TRANS_START | __TRANS_ATTACH | __TRANS_JOIN | __TRANS_JOIN_NOLOCK), } it is very intuitionistic. Besides that, because we remove ->in_commit in transaction structure, so the lock ->commit_lock which was used to protect it is unnecessary, remove ->commit_lock. Signed-off-by: Miao Xie <miaox@cn.fujitsu.com> Signed-off-by: Josef Bacik <jbacik@fusionio.com>
2013-05-17 11:53:43 +08:00
if (cur_trans->state >= TRANS_STATE_COMMIT_START) {
btrfs: make concurrent fsyncs wait less when waiting for a transaction commit Often an fsync needs to fallback to a transaction commit for several reasons (to ensure consistency after a power failure, a new block group was allocated or a temporary error such as ENOMEM or ENOSPC happened). In that case the log is marked as needing a full commit and any concurrent tasks attempting to log inodes or commit the log will also fallback to the transaction commit. When this happens they all wait for the task that first started the transaction commit to finish the transaction commit - however they wait until the full transaction commit happens, which is not needed, as they only need to wait for the superblocks to be persisted and not for unpinning all the extents pinned during the transaction's lifetime, which even for short lived transactions can be a few thousand and take some significant amount of time to complete - for dbench workloads I have observed up to 4~5 milliseconds of time spent unpinning extents in the worst cases, and the number of pinned extents was between 2 to 3 thousand. So allow fsync tasks to skip waiting for the unpinning of extents when they call btrfs_commit_transaction() and they were not the task that started the transaction commit (that one has to do it, the alternative would be to offload the transaction commit to another task so that it could avoid waiting for the extent unpinning or offload the extent unpinning to another task). This patch is part of a patchset comprised of the following patches: btrfs: remove unnecessary directory inode item update when deleting dir entry btrfs: stop setting nbytes when filling inode item for logging btrfs: avoid logging new ancestor inodes when logging new inode btrfs: skip logging directories already logged when logging all parents btrfs: skip logging inodes already logged when logging new entries btrfs: remove unnecessary check_parent_dirs_for_sync() btrfs: make concurrent fsyncs wait less when waiting for a transaction commit After applying the entire patchset, dbench shows improvements in respect to throughput and latency. The script used to measure it is the following: $ cat dbench-test.sh #!/bin/bash DEV=/dev/sdk MNT=/mnt/sdk MOUNT_OPTIONS="-o ssd" MKFS_OPTIONS="-m single -d single" echo "performance" | tee /sys/devices/system/cpu/cpu*/cpufreq/scaling_governor umount $DEV &> /dev/null mkfs.btrfs -f $MKFS_OPTIONS $DEV mount $MOUNT_OPTIONS $DEV $MNT dbench -D $MNT -t 300 64 umount $MNT The test was run on a physical machine with 12 cores (Intel corei7), 64G of ram, using a NVMe device and a non-debug kernel configuration (Debian's default configuration). Before applying patchset, 32 clients: Operation Count AvgLat MaxLat ---------------------------------------- NTCreateX 9627107 0.153 61.938 Close 7072076 0.001 3.175 Rename 407633 1.222 44.439 Unlink 1943895 0.658 44.440 Deltree 256 17.339 110.891 Mkdir 128 0.003 0.009 Qpathinfo 8725406 0.064 17.850 Qfileinfo 1529516 0.001 2.188 Qfsinfo 1599884 0.002 1.457 Sfileinfo 784200 0.005 3.562 Find 3373513 0.411 30.312 WriteX 4802132 0.053 29.054 ReadX 15089959 0.002 5.801 LockX 31344 0.002 0.425 UnlockX 31344 0.001 0.173 Flush 674724 5.952 341.830 Throughput 1008.02 MB/sec 32 clients 32 procs max_latency=341.833 ms After applying patchset, 32 clients: After patchset, with 32 clients: Operation Count AvgLat MaxLat ---------------------------------------- NTCreateX 9931568 0.111 25.597 Close 7295730 0.001 2.171 Rename 420549 0.982 49.714 Unlink 2005366 0.497 39.015 Deltree 256 11.149 89.242 Mkdir 128 0.002 0.014 Qpathinfo 9001863 0.049 20.761 Qfileinfo 1577730 0.001 2.546 Qfsinfo 1650508 0.002 3.531 Sfileinfo 809031 0.005 5.846 Find 3480259 0.309 23.977 WriteX 4952505 0.043 41.283 ReadX 15568127 0.002 5.476 LockX 32338 0.002 0.978 UnlockX 32338 0.001 2.032 Flush 696017 7.485 228.835 Throughput 1049.91 MB/sec 32 clients 32 procs max_latency=228.847 ms --> +4.1% throughput, -39.6% max latency Before applying patchset, 64 clients: Operation Count AvgLat MaxLat ---------------------------------------- NTCreateX 8956748 0.342 108.312 Close 6579660 0.001 3.823 Rename 379209 2.396 81.897 Unlink 1808625 1.108 131.148 Deltree 256 25.632 172.176 Mkdir 128 0.003 0.018 Qpathinfo 8117615 0.131 55.916 Qfileinfo 1423495 0.001 2.635 Qfsinfo 1488496 0.002 5.412 Sfileinfo 729472 0.007 8.643 Find 3138598 0.855 78.321 WriteX 4470783 0.102 79.442 ReadX 14038139 0.002 7.578 LockX 29158 0.002 0.844 UnlockX 29158 0.001 0.567 Flush 627746 14.168 506.151 Throughput 924.738 MB/sec 64 clients 64 procs max_latency=506.154 ms After applying patchset, 64 clients: Operation Count AvgLat MaxLat ---------------------------------------- NTCreateX 9069003 0.303 43.193 Close 6662328 0.001 3.888 Rename 383976 2.194 46.418 Unlink 1831080 1.022 43.873 Deltree 256 24.037 155.763 Mkdir 128 0.002 0.005 Qpathinfo 8219173 0.137 30.233 Qfileinfo 1441203 0.001 3.204 Qfsinfo 1507092 0.002 4.055 Sfileinfo 738775 0.006 5.431 Find 3177874 0.936 38.170 WriteX 4526152 0.084 39.518 ReadX 14213562 0.002 24.760 LockX 29522 0.002 1.221 UnlockX 29522 0.001 0.694 Flush 635652 14.358 422.039 Throughput 990.13 MB/sec 64 clients 64 procs max_latency=422.043 ms --> +6.8% throughput, -18.1% max latency Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2021-01-27 18:35:00 +08:00
enum btrfs_trans_state want_state = TRANS_STATE_COMPLETED;
btrfs: fix use-after-free after failure to create a snapshot At ioctl.c:create_snapshot(), we allocate a pending snapshot structure and then attach it to the transaction's list of pending snapshots. After that we call btrfs_commit_transaction(), and if that returns an error we jump to 'fail' label, where we kfree() the pending snapshot structure. This can result in a later use-after-free of the pending snapshot: 1) We allocated the pending snapshot and added it to the transaction's list of pending snapshots; 2) We call btrfs_commit_transaction(), and it fails either at the first call to btrfs_run_delayed_refs() or btrfs_start_dirty_block_groups(). In both cases, we don't abort the transaction and we release our transaction handle. We jump to the 'fail' label and free the pending snapshot structure. We return with the pending snapshot still in the transaction's list; 3) Another task commits the transaction. This time there's no error at all, and then during the transaction commit it accesses a pointer to the pending snapshot structure that the snapshot creation task has already freed, resulting in a user-after-free. This issue could actually be detected by smatch, which produced the following warning: fs/btrfs/ioctl.c:843 create_snapshot() warn: '&pending_snapshot->list' not removed from list So fix this by not having the snapshot creation ioctl directly add the pending snapshot to the transaction's list. Instead add the pending snapshot to the transaction handle, and then at btrfs_commit_transaction() we add the snapshot to the list only when we can guarantee that any error returned after that point will result in a transaction abort, in which case the ioctl code can safely free the pending snapshot and no one can access it anymore. CC: stable@vger.kernel.org # 5.10+ Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2022-01-21 23:44:39 +08:00
add_pending_snapshot(trans);
spin_unlock(&fs_info->trans_lock);
refcount_inc(&cur_trans->use_count);
btrfs: make concurrent fsyncs wait less when waiting for a transaction commit Often an fsync needs to fallback to a transaction commit for several reasons (to ensure consistency after a power failure, a new block group was allocated or a temporary error such as ENOMEM or ENOSPC happened). In that case the log is marked as needing a full commit and any concurrent tasks attempting to log inodes or commit the log will also fallback to the transaction commit. When this happens they all wait for the task that first started the transaction commit to finish the transaction commit - however they wait until the full transaction commit happens, which is not needed, as they only need to wait for the superblocks to be persisted and not for unpinning all the extents pinned during the transaction's lifetime, which even for short lived transactions can be a few thousand and take some significant amount of time to complete - for dbench workloads I have observed up to 4~5 milliseconds of time spent unpinning extents in the worst cases, and the number of pinned extents was between 2 to 3 thousand. So allow fsync tasks to skip waiting for the unpinning of extents when they call btrfs_commit_transaction() and they were not the task that started the transaction commit (that one has to do it, the alternative would be to offload the transaction commit to another task so that it could avoid waiting for the extent unpinning or offload the extent unpinning to another task). This patch is part of a patchset comprised of the following patches: btrfs: remove unnecessary directory inode item update when deleting dir entry btrfs: stop setting nbytes when filling inode item for logging btrfs: avoid logging new ancestor inodes when logging new inode btrfs: skip logging directories already logged when logging all parents btrfs: skip logging inodes already logged when logging new entries btrfs: remove unnecessary check_parent_dirs_for_sync() btrfs: make concurrent fsyncs wait less when waiting for a transaction commit After applying the entire patchset, dbench shows improvements in respect to throughput and latency. The script used to measure it is the following: $ cat dbench-test.sh #!/bin/bash DEV=/dev/sdk MNT=/mnt/sdk MOUNT_OPTIONS="-o ssd" MKFS_OPTIONS="-m single -d single" echo "performance" | tee /sys/devices/system/cpu/cpu*/cpufreq/scaling_governor umount $DEV &> /dev/null mkfs.btrfs -f $MKFS_OPTIONS $DEV mount $MOUNT_OPTIONS $DEV $MNT dbench -D $MNT -t 300 64 umount $MNT The test was run on a physical machine with 12 cores (Intel corei7), 64G of ram, using a NVMe device and a non-debug kernel configuration (Debian's default configuration). Before applying patchset, 32 clients: Operation Count AvgLat MaxLat ---------------------------------------- NTCreateX 9627107 0.153 61.938 Close 7072076 0.001 3.175 Rename 407633 1.222 44.439 Unlink 1943895 0.658 44.440 Deltree 256 17.339 110.891 Mkdir 128 0.003 0.009 Qpathinfo 8725406 0.064 17.850 Qfileinfo 1529516 0.001 2.188 Qfsinfo 1599884 0.002 1.457 Sfileinfo 784200 0.005 3.562 Find 3373513 0.411 30.312 WriteX 4802132 0.053 29.054 ReadX 15089959 0.002 5.801 LockX 31344 0.002 0.425 UnlockX 31344 0.001 0.173 Flush 674724 5.952 341.830 Throughput 1008.02 MB/sec 32 clients 32 procs max_latency=341.833 ms After applying patchset, 32 clients: After patchset, with 32 clients: Operation Count AvgLat MaxLat ---------------------------------------- NTCreateX 9931568 0.111 25.597 Close 7295730 0.001 2.171 Rename 420549 0.982 49.714 Unlink 2005366 0.497 39.015 Deltree 256 11.149 89.242 Mkdir 128 0.002 0.014 Qpathinfo 9001863 0.049 20.761 Qfileinfo 1577730 0.001 2.546 Qfsinfo 1650508 0.002 3.531 Sfileinfo 809031 0.005 5.846 Find 3480259 0.309 23.977 WriteX 4952505 0.043 41.283 ReadX 15568127 0.002 5.476 LockX 32338 0.002 0.978 UnlockX 32338 0.001 2.032 Flush 696017 7.485 228.835 Throughput 1049.91 MB/sec 32 clients 32 procs max_latency=228.847 ms --> +4.1% throughput, -39.6% max latency Before applying patchset, 64 clients: Operation Count AvgLat MaxLat ---------------------------------------- NTCreateX 8956748 0.342 108.312 Close 6579660 0.001 3.823 Rename 379209 2.396 81.897 Unlink 1808625 1.108 131.148 Deltree 256 25.632 172.176 Mkdir 128 0.003 0.018 Qpathinfo 8117615 0.131 55.916 Qfileinfo 1423495 0.001 2.635 Qfsinfo 1488496 0.002 5.412 Sfileinfo 729472 0.007 8.643 Find 3138598 0.855 78.321 WriteX 4470783 0.102 79.442 ReadX 14038139 0.002 7.578 LockX 29158 0.002 0.844 UnlockX 29158 0.001 0.567 Flush 627746 14.168 506.151 Throughput 924.738 MB/sec 64 clients 64 procs max_latency=506.154 ms After applying patchset, 64 clients: Operation Count AvgLat MaxLat ---------------------------------------- NTCreateX 9069003 0.303 43.193 Close 6662328 0.001 3.888 Rename 383976 2.194 46.418 Unlink 1831080 1.022 43.873 Deltree 256 24.037 155.763 Mkdir 128 0.002 0.005 Qpathinfo 8219173 0.137 30.233 Qfileinfo 1441203 0.001 3.204 Qfsinfo 1507092 0.002 4.055 Sfileinfo 738775 0.006 5.431 Find 3177874 0.936 38.170 WriteX 4526152 0.084 39.518 ReadX 14213562 0.002 24.760 LockX 29522 0.002 1.221 UnlockX 29522 0.001 0.694 Flush 635652 14.358 422.039 Throughput 990.13 MB/sec 64 clients 64 procs max_latency=422.043 ms --> +6.8% throughput, -18.1% max latency Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2021-01-27 18:35:00 +08:00
if (trans->in_fsync)
want_state = TRANS_STATE_SUPER_COMMITTED;
ret = btrfs_end_transaction(trans);
wait_for_commit(cur_trans, want_state);
if (TRANS_ABORTED(cur_trans))
ret = cur_trans->aborted;
btrfs_put_transaction(cur_trans);
return ret;
}
Btrfs: make the state of the transaction more readable We used 3 variants to track the state of the transaction, it was complex and wasted the memory space. Besides that, it was hard to understand that which types of the transaction handles should be blocked in each transaction state, so the developers often made mistakes. This patch improved the above problem. In this patch, we define 6 states for the transaction, enum btrfs_trans_state { TRANS_STATE_RUNNING = 0, TRANS_STATE_BLOCKED = 1, TRANS_STATE_COMMIT_START = 2, TRANS_STATE_COMMIT_DOING = 3, TRANS_STATE_UNBLOCKED = 4, TRANS_STATE_COMPLETED = 5, TRANS_STATE_MAX = 6, } and just use 1 variant to track those state. In order to make the blocked handle types for each state more clear, we introduce a array: unsigned int btrfs_blocked_trans_types[TRANS_STATE_MAX] = { [TRANS_STATE_RUNNING] = 0U, [TRANS_STATE_BLOCKED] = (__TRANS_USERSPACE | __TRANS_START), [TRANS_STATE_COMMIT_START] = (__TRANS_USERSPACE | __TRANS_START | __TRANS_ATTACH), [TRANS_STATE_COMMIT_DOING] = (__TRANS_USERSPACE | __TRANS_START | __TRANS_ATTACH | __TRANS_JOIN), [TRANS_STATE_UNBLOCKED] = (__TRANS_USERSPACE | __TRANS_START | __TRANS_ATTACH | __TRANS_JOIN | __TRANS_JOIN_NOLOCK), [TRANS_STATE_COMPLETED] = (__TRANS_USERSPACE | __TRANS_START | __TRANS_ATTACH | __TRANS_JOIN | __TRANS_JOIN_NOLOCK), } it is very intuitionistic. Besides that, because we remove ->in_commit in transaction structure, so the lock ->commit_lock which was used to protect it is unnecessary, remove ->commit_lock. Signed-off-by: Miao Xie <miaox@cn.fujitsu.com> Signed-off-by: Josef Bacik <jbacik@fusionio.com>
2013-05-17 11:53:43 +08:00
cur_trans->state = TRANS_STATE_COMMIT_START;
wake_up(&fs_info->transaction_blocked_wait);
if (cur_trans->list.prev != &fs_info->trans_list) {
btrfs: make concurrent fsyncs wait less when waiting for a transaction commit Often an fsync needs to fallback to a transaction commit for several reasons (to ensure consistency after a power failure, a new block group was allocated or a temporary error such as ENOMEM or ENOSPC happened). In that case the log is marked as needing a full commit and any concurrent tasks attempting to log inodes or commit the log will also fallback to the transaction commit. When this happens they all wait for the task that first started the transaction commit to finish the transaction commit - however they wait until the full transaction commit happens, which is not needed, as they only need to wait for the superblocks to be persisted and not for unpinning all the extents pinned during the transaction's lifetime, which even for short lived transactions can be a few thousand and take some significant amount of time to complete - for dbench workloads I have observed up to 4~5 milliseconds of time spent unpinning extents in the worst cases, and the number of pinned extents was between 2 to 3 thousand. So allow fsync tasks to skip waiting for the unpinning of extents when they call btrfs_commit_transaction() and they were not the task that started the transaction commit (that one has to do it, the alternative would be to offload the transaction commit to another task so that it could avoid waiting for the extent unpinning or offload the extent unpinning to another task). This patch is part of a patchset comprised of the following patches: btrfs: remove unnecessary directory inode item update when deleting dir entry btrfs: stop setting nbytes when filling inode item for logging btrfs: avoid logging new ancestor inodes when logging new inode btrfs: skip logging directories already logged when logging all parents btrfs: skip logging inodes already logged when logging new entries btrfs: remove unnecessary check_parent_dirs_for_sync() btrfs: make concurrent fsyncs wait less when waiting for a transaction commit After applying the entire patchset, dbench shows improvements in respect to throughput and latency. The script used to measure it is the following: $ cat dbench-test.sh #!/bin/bash DEV=/dev/sdk MNT=/mnt/sdk MOUNT_OPTIONS="-o ssd" MKFS_OPTIONS="-m single -d single" echo "performance" | tee /sys/devices/system/cpu/cpu*/cpufreq/scaling_governor umount $DEV &> /dev/null mkfs.btrfs -f $MKFS_OPTIONS $DEV mount $MOUNT_OPTIONS $DEV $MNT dbench -D $MNT -t 300 64 umount $MNT The test was run on a physical machine with 12 cores (Intel corei7), 64G of ram, using a NVMe device and a non-debug kernel configuration (Debian's default configuration). Before applying patchset, 32 clients: Operation Count AvgLat MaxLat ---------------------------------------- NTCreateX 9627107 0.153 61.938 Close 7072076 0.001 3.175 Rename 407633 1.222 44.439 Unlink 1943895 0.658 44.440 Deltree 256 17.339 110.891 Mkdir 128 0.003 0.009 Qpathinfo 8725406 0.064 17.850 Qfileinfo 1529516 0.001 2.188 Qfsinfo 1599884 0.002 1.457 Sfileinfo 784200 0.005 3.562 Find 3373513 0.411 30.312 WriteX 4802132 0.053 29.054 ReadX 15089959 0.002 5.801 LockX 31344 0.002 0.425 UnlockX 31344 0.001 0.173 Flush 674724 5.952 341.830 Throughput 1008.02 MB/sec 32 clients 32 procs max_latency=341.833 ms After applying patchset, 32 clients: After patchset, with 32 clients: Operation Count AvgLat MaxLat ---------------------------------------- NTCreateX 9931568 0.111 25.597 Close 7295730 0.001 2.171 Rename 420549 0.982 49.714 Unlink 2005366 0.497 39.015 Deltree 256 11.149 89.242 Mkdir 128 0.002 0.014 Qpathinfo 9001863 0.049 20.761 Qfileinfo 1577730 0.001 2.546 Qfsinfo 1650508 0.002 3.531 Sfileinfo 809031 0.005 5.846 Find 3480259 0.309 23.977 WriteX 4952505 0.043 41.283 ReadX 15568127 0.002 5.476 LockX 32338 0.002 0.978 UnlockX 32338 0.001 2.032 Flush 696017 7.485 228.835 Throughput 1049.91 MB/sec 32 clients 32 procs max_latency=228.847 ms --> +4.1% throughput, -39.6% max latency Before applying patchset, 64 clients: Operation Count AvgLat MaxLat ---------------------------------------- NTCreateX 8956748 0.342 108.312 Close 6579660 0.001 3.823 Rename 379209 2.396 81.897 Unlink 1808625 1.108 131.148 Deltree 256 25.632 172.176 Mkdir 128 0.003 0.018 Qpathinfo 8117615 0.131 55.916 Qfileinfo 1423495 0.001 2.635 Qfsinfo 1488496 0.002 5.412 Sfileinfo 729472 0.007 8.643 Find 3138598 0.855 78.321 WriteX 4470783 0.102 79.442 ReadX 14038139 0.002 7.578 LockX 29158 0.002 0.844 UnlockX 29158 0.001 0.567 Flush 627746 14.168 506.151 Throughput 924.738 MB/sec 64 clients 64 procs max_latency=506.154 ms After applying patchset, 64 clients: Operation Count AvgLat MaxLat ---------------------------------------- NTCreateX 9069003 0.303 43.193 Close 6662328 0.001 3.888 Rename 383976 2.194 46.418 Unlink 1831080 1.022 43.873 Deltree 256 24.037 155.763 Mkdir 128 0.002 0.005 Qpathinfo 8219173 0.137 30.233 Qfileinfo 1441203 0.001 3.204 Qfsinfo 1507092 0.002 4.055 Sfileinfo 738775 0.006 5.431 Find 3177874 0.936 38.170 WriteX 4526152 0.084 39.518 ReadX 14213562 0.002 24.760 LockX 29522 0.002 1.221 UnlockX 29522 0.001 0.694 Flush 635652 14.358 422.039 Throughput 990.13 MB/sec 64 clients 64 procs max_latency=422.043 ms --> +6.8% throughput, -18.1% max latency Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2021-01-27 18:35:00 +08:00
enum btrfs_trans_state want_state = TRANS_STATE_COMPLETED;
if (trans->in_fsync)
want_state = TRANS_STATE_SUPER_COMMITTED;
prev_trans = list_entry(cur_trans->list.prev,
struct btrfs_transaction, list);
btrfs: make concurrent fsyncs wait less when waiting for a transaction commit Often an fsync needs to fallback to a transaction commit for several reasons (to ensure consistency after a power failure, a new block group was allocated or a temporary error such as ENOMEM or ENOSPC happened). In that case the log is marked as needing a full commit and any concurrent tasks attempting to log inodes or commit the log will also fallback to the transaction commit. When this happens they all wait for the task that first started the transaction commit to finish the transaction commit - however they wait until the full transaction commit happens, which is not needed, as they only need to wait for the superblocks to be persisted and not for unpinning all the extents pinned during the transaction's lifetime, which even for short lived transactions can be a few thousand and take some significant amount of time to complete - for dbench workloads I have observed up to 4~5 milliseconds of time spent unpinning extents in the worst cases, and the number of pinned extents was between 2 to 3 thousand. So allow fsync tasks to skip waiting for the unpinning of extents when they call btrfs_commit_transaction() and they were not the task that started the transaction commit (that one has to do it, the alternative would be to offload the transaction commit to another task so that it could avoid waiting for the extent unpinning or offload the extent unpinning to another task). This patch is part of a patchset comprised of the following patches: btrfs: remove unnecessary directory inode item update when deleting dir entry btrfs: stop setting nbytes when filling inode item for logging btrfs: avoid logging new ancestor inodes when logging new inode btrfs: skip logging directories already logged when logging all parents btrfs: skip logging inodes already logged when logging new entries btrfs: remove unnecessary check_parent_dirs_for_sync() btrfs: make concurrent fsyncs wait less when waiting for a transaction commit After applying the entire patchset, dbench shows improvements in respect to throughput and latency. The script used to measure it is the following: $ cat dbench-test.sh #!/bin/bash DEV=/dev/sdk MNT=/mnt/sdk MOUNT_OPTIONS="-o ssd" MKFS_OPTIONS="-m single -d single" echo "performance" | tee /sys/devices/system/cpu/cpu*/cpufreq/scaling_governor umount $DEV &> /dev/null mkfs.btrfs -f $MKFS_OPTIONS $DEV mount $MOUNT_OPTIONS $DEV $MNT dbench -D $MNT -t 300 64 umount $MNT The test was run on a physical machine with 12 cores (Intel corei7), 64G of ram, using a NVMe device and a non-debug kernel configuration (Debian's default configuration). Before applying patchset, 32 clients: Operation Count AvgLat MaxLat ---------------------------------------- NTCreateX 9627107 0.153 61.938 Close 7072076 0.001 3.175 Rename 407633 1.222 44.439 Unlink 1943895 0.658 44.440 Deltree 256 17.339 110.891 Mkdir 128 0.003 0.009 Qpathinfo 8725406 0.064 17.850 Qfileinfo 1529516 0.001 2.188 Qfsinfo 1599884 0.002 1.457 Sfileinfo 784200 0.005 3.562 Find 3373513 0.411 30.312 WriteX 4802132 0.053 29.054 ReadX 15089959 0.002 5.801 LockX 31344 0.002 0.425 UnlockX 31344 0.001 0.173 Flush 674724 5.952 341.830 Throughput 1008.02 MB/sec 32 clients 32 procs max_latency=341.833 ms After applying patchset, 32 clients: After patchset, with 32 clients: Operation Count AvgLat MaxLat ---------------------------------------- NTCreateX 9931568 0.111 25.597 Close 7295730 0.001 2.171 Rename 420549 0.982 49.714 Unlink 2005366 0.497 39.015 Deltree 256 11.149 89.242 Mkdir 128 0.002 0.014 Qpathinfo 9001863 0.049 20.761 Qfileinfo 1577730 0.001 2.546 Qfsinfo 1650508 0.002 3.531 Sfileinfo 809031 0.005 5.846 Find 3480259 0.309 23.977 WriteX 4952505 0.043 41.283 ReadX 15568127 0.002 5.476 LockX 32338 0.002 0.978 UnlockX 32338 0.001 2.032 Flush 696017 7.485 228.835 Throughput 1049.91 MB/sec 32 clients 32 procs max_latency=228.847 ms --> +4.1% throughput, -39.6% max latency Before applying patchset, 64 clients: Operation Count AvgLat MaxLat ---------------------------------------- NTCreateX 8956748 0.342 108.312 Close 6579660 0.001 3.823 Rename 379209 2.396 81.897 Unlink 1808625 1.108 131.148 Deltree 256 25.632 172.176 Mkdir 128 0.003 0.018 Qpathinfo 8117615 0.131 55.916 Qfileinfo 1423495 0.001 2.635 Qfsinfo 1488496 0.002 5.412 Sfileinfo 729472 0.007 8.643 Find 3138598 0.855 78.321 WriteX 4470783 0.102 79.442 ReadX 14038139 0.002 7.578 LockX 29158 0.002 0.844 UnlockX 29158 0.001 0.567 Flush 627746 14.168 506.151 Throughput 924.738 MB/sec 64 clients 64 procs max_latency=506.154 ms After applying patchset, 64 clients: Operation Count AvgLat MaxLat ---------------------------------------- NTCreateX 9069003 0.303 43.193 Close 6662328 0.001 3.888 Rename 383976 2.194 46.418 Unlink 1831080 1.022 43.873 Deltree 256 24.037 155.763 Mkdir 128 0.002 0.005 Qpathinfo 8219173 0.137 30.233 Qfileinfo 1441203 0.001 3.204 Qfsinfo 1507092 0.002 4.055 Sfileinfo 738775 0.006 5.431 Find 3177874 0.936 38.170 WriteX 4526152 0.084 39.518 ReadX 14213562 0.002 24.760 LockX 29522 0.002 1.221 UnlockX 29522 0.001 0.694 Flush 635652 14.358 422.039 Throughput 990.13 MB/sec 64 clients 64 procs max_latency=422.043 ms --> +6.8% throughput, -18.1% max latency Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2021-01-27 18:35:00 +08:00
if (prev_trans->state < want_state) {
refcount_inc(&prev_trans->use_count);
spin_unlock(&fs_info->trans_lock);
btrfs: make concurrent fsyncs wait less when waiting for a transaction commit Often an fsync needs to fallback to a transaction commit for several reasons (to ensure consistency after a power failure, a new block group was allocated or a temporary error such as ENOMEM or ENOSPC happened). In that case the log is marked as needing a full commit and any concurrent tasks attempting to log inodes or commit the log will also fallback to the transaction commit. When this happens they all wait for the task that first started the transaction commit to finish the transaction commit - however they wait until the full transaction commit happens, which is not needed, as they only need to wait for the superblocks to be persisted and not for unpinning all the extents pinned during the transaction's lifetime, which even for short lived transactions can be a few thousand and take some significant amount of time to complete - for dbench workloads I have observed up to 4~5 milliseconds of time spent unpinning extents in the worst cases, and the number of pinned extents was between 2 to 3 thousand. So allow fsync tasks to skip waiting for the unpinning of extents when they call btrfs_commit_transaction() and they were not the task that started the transaction commit (that one has to do it, the alternative would be to offload the transaction commit to another task so that it could avoid waiting for the extent unpinning or offload the extent unpinning to another task). This patch is part of a patchset comprised of the following patches: btrfs: remove unnecessary directory inode item update when deleting dir entry btrfs: stop setting nbytes when filling inode item for logging btrfs: avoid logging new ancestor inodes when logging new inode btrfs: skip logging directories already logged when logging all parents btrfs: skip logging inodes already logged when logging new entries btrfs: remove unnecessary check_parent_dirs_for_sync() btrfs: make concurrent fsyncs wait less when waiting for a transaction commit After applying the entire patchset, dbench shows improvements in respect to throughput and latency. The script used to measure it is the following: $ cat dbench-test.sh #!/bin/bash DEV=/dev/sdk MNT=/mnt/sdk MOUNT_OPTIONS="-o ssd" MKFS_OPTIONS="-m single -d single" echo "performance" | tee /sys/devices/system/cpu/cpu*/cpufreq/scaling_governor umount $DEV &> /dev/null mkfs.btrfs -f $MKFS_OPTIONS $DEV mount $MOUNT_OPTIONS $DEV $MNT dbench -D $MNT -t 300 64 umount $MNT The test was run on a physical machine with 12 cores (Intel corei7), 64G of ram, using a NVMe device and a non-debug kernel configuration (Debian's default configuration). Before applying patchset, 32 clients: Operation Count AvgLat MaxLat ---------------------------------------- NTCreateX 9627107 0.153 61.938 Close 7072076 0.001 3.175 Rename 407633 1.222 44.439 Unlink 1943895 0.658 44.440 Deltree 256 17.339 110.891 Mkdir 128 0.003 0.009 Qpathinfo 8725406 0.064 17.850 Qfileinfo 1529516 0.001 2.188 Qfsinfo 1599884 0.002 1.457 Sfileinfo 784200 0.005 3.562 Find 3373513 0.411 30.312 WriteX 4802132 0.053 29.054 ReadX 15089959 0.002 5.801 LockX 31344 0.002 0.425 UnlockX 31344 0.001 0.173 Flush 674724 5.952 341.830 Throughput 1008.02 MB/sec 32 clients 32 procs max_latency=341.833 ms After applying patchset, 32 clients: After patchset, with 32 clients: Operation Count AvgLat MaxLat ---------------------------------------- NTCreateX 9931568 0.111 25.597 Close 7295730 0.001 2.171 Rename 420549 0.982 49.714 Unlink 2005366 0.497 39.015 Deltree 256 11.149 89.242 Mkdir 128 0.002 0.014 Qpathinfo 9001863 0.049 20.761 Qfileinfo 1577730 0.001 2.546 Qfsinfo 1650508 0.002 3.531 Sfileinfo 809031 0.005 5.846 Find 3480259 0.309 23.977 WriteX 4952505 0.043 41.283 ReadX 15568127 0.002 5.476 LockX 32338 0.002 0.978 UnlockX 32338 0.001 2.032 Flush 696017 7.485 228.835 Throughput 1049.91 MB/sec 32 clients 32 procs max_latency=228.847 ms --> +4.1% throughput, -39.6% max latency Before applying patchset, 64 clients: Operation Count AvgLat MaxLat ---------------------------------------- NTCreateX 8956748 0.342 108.312 Close 6579660 0.001 3.823 Rename 379209 2.396 81.897 Unlink 1808625 1.108 131.148 Deltree 256 25.632 172.176 Mkdir 128 0.003 0.018 Qpathinfo 8117615 0.131 55.916 Qfileinfo 1423495 0.001 2.635 Qfsinfo 1488496 0.002 5.412 Sfileinfo 729472 0.007 8.643 Find 3138598 0.855 78.321 WriteX 4470783 0.102 79.442 ReadX 14038139 0.002 7.578 LockX 29158 0.002 0.844 UnlockX 29158 0.001 0.567 Flush 627746 14.168 506.151 Throughput 924.738 MB/sec 64 clients 64 procs max_latency=506.154 ms After applying patchset, 64 clients: Operation Count AvgLat MaxLat ---------------------------------------- NTCreateX 9069003 0.303 43.193 Close 6662328 0.001 3.888 Rename 383976 2.194 46.418 Unlink 1831080 1.022 43.873 Deltree 256 24.037 155.763 Mkdir 128 0.002 0.005 Qpathinfo 8219173 0.137 30.233 Qfileinfo 1441203 0.001 3.204 Qfsinfo 1507092 0.002 4.055 Sfileinfo 738775 0.006 5.431 Find 3177874 0.936 38.170 WriteX 4526152 0.084 39.518 ReadX 14213562 0.002 24.760 LockX 29522 0.002 1.221 UnlockX 29522 0.001 0.694 Flush 635652 14.358 422.039 Throughput 990.13 MB/sec 64 clients 64 procs max_latency=422.043 ms --> +6.8% throughput, -18.1% max latency Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2021-01-27 18:35:00 +08:00
wait_for_commit(prev_trans, want_state);
ret = READ_ONCE(prev_trans->aborted);
btrfs_put_transaction(prev_trans);
Btrfs: check if previous transaction aborted to avoid fs corruption While we are committing a transaction, it's possible the previous one is still finishing its commit and therefore we wait for it to finish first. However we were not checking if that previous transaction ended up getting aborted after we waited for it to commit, so we ended up committing the current transaction which can lead to fs corruption because the new superblock can point to trees that have had one or more nodes/leafs that were never durably persisted. The following sequence diagram exemplifies how this is possible: CPU 0 CPU 1 transaction N starts (...) btrfs_commit_transaction(N) cur_trans->state = TRANS_STATE_COMMIT_START; (...) cur_trans->state = TRANS_STATE_COMMIT_DOING; (...) cur_trans->state = TRANS_STATE_UNBLOCKED; root->fs_info->running_transaction = NULL; btrfs_start_transaction() --> starts transaction N + 1 btrfs_write_and_wait_transaction(trans, root); --> starts writing all new or COWed ebs created at transaction N creates some new ebs, COWs some existing ebs but doesn't COW or deletes eb X btrfs_commit_transaction(N + 1) (...) cur_trans->state = TRANS_STATE_COMMIT_START; (...) wait_for_commit(root, prev_trans); --> prev_trans == transaction N btrfs_write_and_wait_transaction() continues writing ebs --> fails writing eb X, we abort transaction N and set bit BTRFS_FS_STATE_ERROR on fs_info->fs_state, so no new transactions can start after setting that bit cleanup_transaction() btrfs_cleanup_one_transaction() wakes up task at CPU 1 continues, doesn't abort because cur_trans->aborted (transaction N + 1) is zero, and no checks for bit BTRFS_FS_STATE_ERROR in fs_info->fs_state are made btrfs_write_and_wait_transaction(trans, root); --> succeeds, no errors during writeback write_ctree_super(trans, root, 0); --> succeeds --> we have now a superblock that points us to some root that uses eb X, which was never written to disk In this scenario future attempts to read eb X from disk results in an error message like "parent transid verify failed on X wanted Y found Z". So fix this by aborting the current transaction if after waiting for the previous transaction we verify that it was aborted. Cc: stable@vger.kernel.org Signed-off-by: Filipe Manana <fdmanana@suse.com> Reviewed-by: Josef Bacik <jbacik@fb.com> Reviewed-by: Liu Bo <bo.li.liu@oracle.com> Signed-off-by: Chris Mason <clm@fb.com>
2015-08-12 18:54:35 +08:00
if (ret)
goto cleanup_transaction;
Btrfs: kill trans_mutex We use trans_mutex for lots of things, here's a basic list 1) To serialize trans_handles joining the currently running transaction 2) To make sure that no new trans handles are started while we are committing 3) To protect the dead_roots list and the transaction lists Really the serializing trans_handles joining is not too hard, and can really get bogged down in acquiring a reference to the transaction. So replace the trans_mutex with a trans_lock spinlock and use it to do the following 1) Protect fs_info->running_transaction. All trans handles have to do is check this, and then take a reference of the transaction and keep on going. 2) Protect the fs_info->trans_list. This doesn't get used too much, basically it just holds the current transactions, which will usually just be the currently committing transaction and the currently running transaction at most. 3) Protect the dead roots list. This is only ever processed by splicing the list so this is relatively simple. 4) Protect the fs_info->reloc_ctl stuff. This is very lightweight and was using the trans_mutex before, so this is a pretty straightforward change. 5) Protect fs_info->no_trans_join. Because we don't hold the trans_lock over the entirety of the commit we need to have a way to block new people from creating a new transaction while we're doing our work. So we set no_trans_join and in join_transaction we test to see if that is set, and if it is we do a wait_on_commit. 6) Make the transaction use count atomic so we don't need to take locks to modify it when we're dropping references. 7) Add a commit_lock to the transaction to make sure multiple people trying to commit the same transaction don't race and commit at the same time. 8) Make open_ioctl_trans an atomic so we don't have to take any locks for ioctl trans. I have tested this with xfstests, but obviously it is a pretty hairy change so lots of testing is greatly appreciated. Thanks, Signed-off-by: Josef Bacik <josef@redhat.com>
2011-04-12 05:25:13 +08:00
} else {
spin_unlock(&fs_info->trans_lock);
}
Btrfs: kill trans_mutex We use trans_mutex for lots of things, here's a basic list 1) To serialize trans_handles joining the currently running transaction 2) To make sure that no new trans handles are started while we are committing 3) To protect the dead_roots list and the transaction lists Really the serializing trans_handles joining is not too hard, and can really get bogged down in acquiring a reference to the transaction. So replace the trans_mutex with a trans_lock spinlock and use it to do the following 1) Protect fs_info->running_transaction. All trans handles have to do is check this, and then take a reference of the transaction and keep on going. 2) Protect the fs_info->trans_list. This doesn't get used too much, basically it just holds the current transactions, which will usually just be the currently committing transaction and the currently running transaction at most. 3) Protect the dead roots list. This is only ever processed by splicing the list so this is relatively simple. 4) Protect the fs_info->reloc_ctl stuff. This is very lightweight and was using the trans_mutex before, so this is a pretty straightforward change. 5) Protect fs_info->no_trans_join. Because we don't hold the trans_lock over the entirety of the commit we need to have a way to block new people from creating a new transaction while we're doing our work. So we set no_trans_join and in join_transaction we test to see if that is set, and if it is we do a wait_on_commit. 6) Make the transaction use count atomic so we don't need to take locks to modify it when we're dropping references. 7) Add a commit_lock to the transaction to make sure multiple people trying to commit the same transaction don't race and commit at the same time. 8) Make open_ioctl_trans an atomic so we don't have to take any locks for ioctl trans. I have tested this with xfstests, but obviously it is a pretty hairy change so lots of testing is greatly appreciated. Thanks, Signed-off-by: Josef Bacik <josef@redhat.com>
2011-04-12 05:25:13 +08:00
} else {
spin_unlock(&fs_info->trans_lock);
Btrfs: fix race leading to fs corruption after transaction abort When one transaction is finishing its commit, it is possible for another transaction to start and enter its initial commit phase as well. If the first ends up getting aborted, we have a small time window where the second transaction commit does not notice that the previous transaction aborted and ends up committing, writing a superblock that points to btrees that reference extent buffers (nodes and leafs) that were not persisted to disk. The consequence is that after mounting the filesystem again, we will be unable to load some btree nodes/leafs, either because the content on disk is either garbage (or just zeroes) or corresponds to the old content of a previouly COWed or deleted node/leaf, resulting in the well known error messages "parent transid verify failed on ...". The following sequence diagram illustrates how this can happen. CPU 1 CPU 2 <at transaction N> btrfs_commit_transaction() (...) --> sets transaction state to TRANS_STATE_UNBLOCKED --> sets fs_info->running_transaction to NULL (...) btrfs_start_transaction() start_transaction() wait_current_trans() --> returns immediately because fs_info->running_transaction is NULL join_transaction() --> creates transaction N + 1 --> sets fs_info->running_transaction to transaction N + 1 --> adds transaction N + 1 to the fs_info->trans_list list --> returns transaction handle pointing to the new transaction N + 1 (...) btrfs_sync_file() btrfs_start_transaction() --> returns handle to transaction N + 1 (...) btrfs_write_and_wait_transaction() --> writeback of some extent buffer fails, returns an error btrfs_handle_fs_error() --> sets BTRFS_FS_STATE_ERROR in fs_info->fs_state --> jumps to label "scrub_continue" cleanup_transaction() btrfs_abort_transaction(N) --> sets BTRFS_FS_STATE_TRANS_ABORTED flag in fs_info->fs_state --> sets aborted field in the transaction and transaction handle structures, for transaction N only --> removes transaction from the list fs_info->trans_list btrfs_commit_transaction(N + 1) --> transaction N + 1 was not aborted, so it proceeds (...) --> sets the transaction's state to TRANS_STATE_COMMIT_START --> does not find the previous transaction (N) in the fs_info->trans_list, so it doesn't know that transaction was aborted, and the commit of transaction N + 1 proceeds (...) --> sets transaction N + 1 state to TRANS_STATE_UNBLOCKED btrfs_write_and_wait_transaction() --> succeeds writing all extent buffers created in the transaction N + 1 write_all_supers() --> succeeds --> we now have a superblock on disk that points to trees that refer to at least one extent buffer that was never persisted So fix this by updating the transaction commit path to check if the flag BTRFS_FS_STATE_TRANS_ABORTED is set on fs_info->fs_state if after setting the transaction to the TRANS_STATE_COMMIT_START we do not find any previous transaction in the fs_info->trans_list. If the flag is set, just fail the transaction commit with -EROFS, as we do in other places. The exact error code for the previous transaction abort was already logged and reported. Fixes: 49b25e0540904b ("btrfs: enhance transaction abort infrastructure") CC: stable@vger.kernel.org # 4.4+ Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Filipe Manana <fdmanana@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2019-07-25 18:27:04 +08:00
/*
* The previous transaction was aborted and was already removed
* from the list of transactions at fs_info->trans_list. So we
* abort to prevent writing a new superblock that reflects a
* corrupt state (pointing to trees with unwritten nodes/leafs).
*/
if (BTRFS_FS_ERROR(fs_info)) {
Btrfs: fix race leading to fs corruption after transaction abort When one transaction is finishing its commit, it is possible for another transaction to start and enter its initial commit phase as well. If the first ends up getting aborted, we have a small time window where the second transaction commit does not notice that the previous transaction aborted and ends up committing, writing a superblock that points to btrees that reference extent buffers (nodes and leafs) that were not persisted to disk. The consequence is that after mounting the filesystem again, we will be unable to load some btree nodes/leafs, either because the content on disk is either garbage (or just zeroes) or corresponds to the old content of a previouly COWed or deleted node/leaf, resulting in the well known error messages "parent transid verify failed on ...". The following sequence diagram illustrates how this can happen. CPU 1 CPU 2 <at transaction N> btrfs_commit_transaction() (...) --> sets transaction state to TRANS_STATE_UNBLOCKED --> sets fs_info->running_transaction to NULL (...) btrfs_start_transaction() start_transaction() wait_current_trans() --> returns immediately because fs_info->running_transaction is NULL join_transaction() --> creates transaction N + 1 --> sets fs_info->running_transaction to transaction N + 1 --> adds transaction N + 1 to the fs_info->trans_list list --> returns transaction handle pointing to the new transaction N + 1 (...) btrfs_sync_file() btrfs_start_transaction() --> returns handle to transaction N + 1 (...) btrfs_write_and_wait_transaction() --> writeback of some extent buffer fails, returns an error btrfs_handle_fs_error() --> sets BTRFS_FS_STATE_ERROR in fs_info->fs_state --> jumps to label "scrub_continue" cleanup_transaction() btrfs_abort_transaction(N) --> sets BTRFS_FS_STATE_TRANS_ABORTED flag in fs_info->fs_state --> sets aborted field in the transaction and transaction handle structures, for transaction N only --> removes transaction from the list fs_info->trans_list btrfs_commit_transaction(N + 1) --> transaction N + 1 was not aborted, so it proceeds (...) --> sets the transaction's state to TRANS_STATE_COMMIT_START --> does not find the previous transaction (N) in the fs_info->trans_list, so it doesn't know that transaction was aborted, and the commit of transaction N + 1 proceeds (...) --> sets transaction N + 1 state to TRANS_STATE_UNBLOCKED btrfs_write_and_wait_transaction() --> succeeds writing all extent buffers created in the transaction N + 1 write_all_supers() --> succeeds --> we now have a superblock on disk that points to trees that refer to at least one extent buffer that was never persisted So fix this by updating the transaction commit path to check if the flag BTRFS_FS_STATE_TRANS_ABORTED is set on fs_info->fs_state if after setting the transaction to the TRANS_STATE_COMMIT_START we do not find any previous transaction in the fs_info->trans_list. If the flag is set, just fail the transaction commit with -EROFS, as we do in other places. The exact error code for the previous transaction abort was already logged and reported. Fixes: 49b25e0540904b ("btrfs: enhance transaction abort infrastructure") CC: stable@vger.kernel.org # 4.4+ Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Filipe Manana <fdmanana@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2019-07-25 18:27:04 +08:00
ret = -EROFS;
goto cleanup_transaction;
}
}
extwriter_counter_dec(cur_trans, trans->type);
ret = btrfs_start_delalloc_flush(fs_info);
if (ret)
goto cleanup_transaction;
ret = btrfs_run_delayed_items(trans);
if (ret)
goto cleanup_transaction;
wait_event(cur_trans->writer_wait,
extwriter_counter_read(cur_trans) == 0);
/* some pending stuffs might be added after the previous flush. */
ret = btrfs_run_delayed_items(trans);
if (ret)
goto cleanup_transaction;
btrfs_wait_delalloc_flush(fs_info);
btrfs: make fast fsyncs wait only for writeback Currently regardless of a full or a fast fsync we always wait for ordered extents to complete, and then start logging the inode after that. However for fast fsyncs we can just wait for the writeback to complete, we don't need to wait for the ordered extents to complete since we use the list of modified extents maps to figure out which extents we must log and we can get their checksums directly from the ordered extents that are still in flight, otherwise look them up from the checksums tree. Until commit b5e6c3e170b770 ("btrfs: always wait on ordered extents at fsync time"), for fast fsyncs, we used to start logging without even waiting for the writeback to complete first, we would wait for it to complete after logging, while holding a transaction open, which lead to performance issues when using cgroups and probably for other cases too, as wait for IO while holding a transaction handle should be avoided as much as possible. After that, for fast fsyncs, we started to wait for ordered extents to complete before starting to log, which adds some latency to fsyncs and we even got at least one report about a performance drop which bisected to that particular change: https://lore.kernel.org/linux-btrfs/20181109215148.GF23260@techsingularity.net/ This change makes fast fsyncs only wait for writeback to finish before starting to log the inode, instead of waiting for both the writeback to finish and for the ordered extents to complete. This brings back part of the logic we had that extracts checksums from in flight ordered extents, which are not yet in the checksums tree, and making sure transaction commits wait for the completion of ordered extents previously logged (by far most of the time they have already completed by the time a transaction commit starts, resulting in no wait at all), to avoid any data loss if an ordered extent completes after the transaction used to log an inode is committed, followed by a power failure. When there are no other tasks accessing the checksums and the subvolume btrees, the ordered extent completion is pretty fast, typically taking 100 to 200 microseconds only in my observations. However when there are other tasks accessing these btrees, ordered extent completion can take a lot more time due to lock contention on nodes and leaves of these btrees. I've seen cases over 2 milliseconds, which starts to be significant. In particular when we do have concurrent fsyncs against different files there is a lot of contention on the checksums btree, since we have many tasks writing the checksums into the btree and other tasks that already started the logging phase are doing lookups for checksums in the btree. This change also turns all ranged fsyncs into full ranged fsyncs, which is something we already did when not using the NO_HOLES features or when doing a full fsync. This is to guarantee we never miss checksums due to writeback having been triggered only for a part of an extent, and we end up logging the full extent but only checksums for the written range, which results in missing checksums after log replay. Allowing ranged fsyncs to operate again only in the original range, when using the NO_HOLES feature and doing a fast fsync is doable but requires some non trivial changes to the writeback path, which can always be worked on later if needed, but I don't think they are a very common use case. Several tests were performed using fio for different numbers of concurrent jobs, each writing and fsyncing its own file, for both sequential and random file writes. The tests were run on bare metal, no virtualization, on a box with 12 cores (Intel i7-8700), 64Gb of RAM and a NVMe device, with a kernel configuration that is the default of typical distributions (debian in this case), without debug options enabled (kasan, kmemleak, slub debug, debug of page allocations, lock debugging, etc). The following script that calls fio was used: $ cat test-fsync.sh #!/bin/bash DEV=/dev/nvme0n1 MNT=/mnt/btrfs MOUNT_OPTIONS="-o ssd -o space_cache=v2" MKFS_OPTIONS="-d single -m single" if [ $# -ne 5 ]; then echo "Use $0 NUM_JOBS FILE_SIZE FSYNC_FREQ BLOCK_SIZE [write|randwrite]" exit 1 fi NUM_JOBS=$1 FILE_SIZE=$2 FSYNC_FREQ=$3 BLOCK_SIZE=$4 WRITE_MODE=$5 if [ "$WRITE_MODE" != "write" ] && [ "$WRITE_MODE" != "randwrite" ]; then echo "Invalid WRITE_MODE, must be 'write' or 'randwrite'" exit 1 fi cat <<EOF > /tmp/fio-job.ini [writers] rw=$WRITE_MODE fsync=$FSYNC_FREQ fallocate=none group_reporting=1 direct=0 bs=$BLOCK_SIZE ioengine=sync size=$FILE_SIZE directory=$MNT numjobs=$NUM_JOBS EOF echo "performance" | tee /sys/devices/system/cpu/cpu*/cpufreq/scaling_governor echo echo "Using config:" echo cat /tmp/fio-job.ini echo umount $MNT &> /dev/null mkfs.btrfs -f $MKFS_OPTIONS $DEV mount $MOUNT_OPTIONS $DEV $MNT fio /tmp/fio-job.ini umount $MNT The results were the following: ************************* *** sequential writes *** ************************* ==== 1 job, 8GiB file, fsync frequency 1, block size 64KiB ==== Before patch: WRITE: bw=36.6MiB/s (38.4MB/s), 36.6MiB/s-36.6MiB/s (38.4MB/s-38.4MB/s), io=8192MiB (8590MB), run=223689-223689msec After patch: WRITE: bw=40.2MiB/s (42.1MB/s), 40.2MiB/s-40.2MiB/s (42.1MB/s-42.1MB/s), io=8192MiB (8590MB), run=203980-203980msec (+9.8%, -8.8% runtime) ==== 2 jobs, 4GiB files, fsync frequency 1, block size 64KiB ==== Before patch: WRITE: bw=35.8MiB/s (37.5MB/s), 35.8MiB/s-35.8MiB/s (37.5MB/s-37.5MB/s), io=8192MiB (8590MB), run=228950-228950msec After patch: WRITE: bw=43.5MiB/s (45.6MB/s), 43.5MiB/s-43.5MiB/s (45.6MB/s-45.6MB/s), io=8192MiB (8590MB), run=188272-188272msec (+21.5% throughput, -17.8% runtime) ==== 4 jobs, 2GiB files, fsync frequency 1, block size 64KiB ==== Before patch: WRITE: bw=50.1MiB/s (52.6MB/s), 50.1MiB/s-50.1MiB/s (52.6MB/s-52.6MB/s), io=8192MiB (8590MB), run=163446-163446msec After patch: WRITE: bw=64.5MiB/s (67.6MB/s), 64.5MiB/s-64.5MiB/s (67.6MB/s-67.6MB/s), io=8192MiB (8590MB), run=126987-126987msec (+28.7% throughput, -22.3% runtime) ==== 8 jobs, 1GiB files, fsync frequency 1, block size 64KiB ==== Before patch: WRITE: bw=64.0MiB/s (68.1MB/s), 64.0MiB/s-64.0MiB/s (68.1MB/s-68.1MB/s), io=8192MiB (8590MB), run=126075-126075msec After patch: WRITE: bw=86.8MiB/s (91.0MB/s), 86.8MiB/s-86.8MiB/s (91.0MB/s-91.0MB/s), io=8192MiB (8590MB), run=94358-94358msec (+35.6% throughput, -25.2% runtime) ==== 16 jobs, 512MiB files, fsync frequency 1, block size 64KiB ==== Before patch: WRITE: bw=79.8MiB/s (83.6MB/s), 79.8MiB/s-79.8MiB/s (83.6MB/s-83.6MB/s), io=8192MiB (8590MB), run=102694-102694msec After patch: WRITE: bw=107MiB/s (112MB/s), 107MiB/s-107MiB/s (112MB/s-112MB/s), io=8192MiB (8590MB), run=76446-76446msec (+34.1% throughput, -25.6% runtime) ==== 32 jobs, 512MiB files, fsync frequency 1, block size 64KiB ==== Before patch: WRITE: bw=93.2MiB/s (97.7MB/s), 93.2MiB/s-93.2MiB/s (97.7MB/s-97.7MB/s), io=16.0GiB (17.2GB), run=175836-175836msec After patch: WRITE: bw=111MiB/s (117MB/s), 111MiB/s-111MiB/s (117MB/s-117MB/s), io=16.0GiB (17.2GB), run=147001-147001msec (+19.1% throughput, -16.4% runtime) ==== 64 jobs, 512MiB files, fsync frequency 1, block size 64KiB ==== Before patch: WRITE: bw=108MiB/s (114MB/s), 108MiB/s-108MiB/s (114MB/s-114MB/s), io=32.0GiB (34.4GB), run=302656-302656msec After patch: WRITE: bw=133MiB/s (140MB/s), 133MiB/s-133MiB/s (140MB/s-140MB/s), io=32.0GiB (34.4GB), run=246003-246003msec (+23.1% throughput, -18.7% runtime) ************************ *** random writes *** ************************ ==== 1 job, 8GiB file, fsync frequency 16, block size 4KiB ==== Before patch: WRITE: bw=11.5MiB/s (12.0MB/s), 11.5MiB/s-11.5MiB/s (12.0MB/s-12.0MB/s), io=8192MiB (8590MB), run=714281-714281msec After patch: WRITE: bw=11.6MiB/s (12.2MB/s), 11.6MiB/s-11.6MiB/s (12.2MB/s-12.2MB/s), io=8192MiB (8590MB), run=705959-705959msec (+0.9% throughput, -1.7% runtime) ==== 2 jobs, 4GiB files, fsync frequency 16, block size 4KiB ==== Before patch: WRITE: bw=12.8MiB/s (13.5MB/s), 12.8MiB/s-12.8MiB/s (13.5MB/s-13.5MB/s), io=8192MiB (8590MB), run=638101-638101msec After patch: WRITE: bw=13.1MiB/s (13.7MB/s), 13.1MiB/s-13.1MiB/s (13.7MB/s-13.7MB/s), io=8192MiB (8590MB), run=625374-625374msec (+2.3% throughput, -2.0% runtime) ==== 4 jobs, 2GiB files, fsync frequency 16, block size 4KiB ==== Before patch: WRITE: bw=15.4MiB/s (16.2MB/s), 15.4MiB/s-15.4MiB/s (16.2MB/s-16.2MB/s), io=8192MiB (8590MB), run=531146-531146msec After patch: WRITE: bw=17.8MiB/s (18.7MB/s), 17.8MiB/s-17.8MiB/s (18.7MB/s-18.7MB/s), io=8192MiB (8590MB), run=460431-460431msec (+15.6% throughput, -13.3% runtime) ==== 8 jobs, 1GiB files, fsync frequency 16, block size 4KiB ==== Before patch: WRITE: bw=19.9MiB/s (20.8MB/s), 19.9MiB/s-19.9MiB/s (20.8MB/s-20.8MB/s), io=8192MiB (8590MB), run=412664-412664msec After patch: WRITE: bw=22.2MiB/s (23.3MB/s), 22.2MiB/s-22.2MiB/s (23.3MB/s-23.3MB/s), io=8192MiB (8590MB), run=368589-368589msec (+11.6% throughput, -10.7% runtime) ==== 16 jobs, 512MiB files, fsync frequency 16, block size 4KiB ==== Before patch: WRITE: bw=29.3MiB/s (30.7MB/s), 29.3MiB/s-29.3MiB/s (30.7MB/s-30.7MB/s), io=8192MiB (8590MB), run=279924-279924msec After patch: WRITE: bw=30.4MiB/s (31.9MB/s), 30.4MiB/s-30.4MiB/s (31.9MB/s-31.9MB/s), io=8192MiB (8590MB), run=269258-269258msec (+3.8% throughput, -3.8% runtime) ==== 32 jobs, 512MiB files, fsync frequency 16, block size 4KiB ==== Before patch: WRITE: bw=36.9MiB/s (38.7MB/s), 36.9MiB/s-36.9MiB/s (38.7MB/s-38.7MB/s), io=16.0GiB (17.2GB), run=443581-443581msec After patch: WRITE: bw=41.6MiB/s (43.6MB/s), 41.6MiB/s-41.6MiB/s (43.6MB/s-43.6MB/s), io=16.0GiB (17.2GB), run=394114-394114msec (+12.7% throughput, -11.2% runtime) ==== 64 jobs, 512MiB files, fsync frequency 16, block size 4KiB ==== Before patch: WRITE: bw=45.9MiB/s (48.1MB/s), 45.9MiB/s-45.9MiB/s (48.1MB/s-48.1MB/s), io=32.0GiB (34.4GB), run=714614-714614msec After patch: WRITE: bw=48.8MiB/s (51.1MB/s), 48.8MiB/s-48.8MiB/s (51.1MB/s-51.1MB/s), io=32.0GiB (34.4GB), run=672087-672087msec (+6.3% throughput, -6.0% runtime) Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2020-08-11 19:43:58 +08:00
/*
* Wait for all ordered extents started by a fast fsync that joined this
* transaction. Otherwise if this transaction commits before the ordered
* extents complete we lose logged data after a power failure.
*/
wait_event(cur_trans->pending_wait,
atomic_read(&cur_trans->pending_ordered) == 0);
btrfs_scrub_pause(fs_info);
/*
* Ok now we need to make sure to block out any other joins while we
* commit the transaction. We could have started a join before setting
Btrfs: make the state of the transaction more readable We used 3 variants to track the state of the transaction, it was complex and wasted the memory space. Besides that, it was hard to understand that which types of the transaction handles should be blocked in each transaction state, so the developers often made mistakes. This patch improved the above problem. In this patch, we define 6 states for the transaction, enum btrfs_trans_state { TRANS_STATE_RUNNING = 0, TRANS_STATE_BLOCKED = 1, TRANS_STATE_COMMIT_START = 2, TRANS_STATE_COMMIT_DOING = 3, TRANS_STATE_UNBLOCKED = 4, TRANS_STATE_COMPLETED = 5, TRANS_STATE_MAX = 6, } and just use 1 variant to track those state. In order to make the blocked handle types for each state more clear, we introduce a array: unsigned int btrfs_blocked_trans_types[TRANS_STATE_MAX] = { [TRANS_STATE_RUNNING] = 0U, [TRANS_STATE_BLOCKED] = (__TRANS_USERSPACE | __TRANS_START), [TRANS_STATE_COMMIT_START] = (__TRANS_USERSPACE | __TRANS_START | __TRANS_ATTACH), [TRANS_STATE_COMMIT_DOING] = (__TRANS_USERSPACE | __TRANS_START | __TRANS_ATTACH | __TRANS_JOIN), [TRANS_STATE_UNBLOCKED] = (__TRANS_USERSPACE | __TRANS_START | __TRANS_ATTACH | __TRANS_JOIN | __TRANS_JOIN_NOLOCK), [TRANS_STATE_COMPLETED] = (__TRANS_USERSPACE | __TRANS_START | __TRANS_ATTACH | __TRANS_JOIN | __TRANS_JOIN_NOLOCK), } it is very intuitionistic. Besides that, because we remove ->in_commit in transaction structure, so the lock ->commit_lock which was used to protect it is unnecessary, remove ->commit_lock. Signed-off-by: Miao Xie <miaox@cn.fujitsu.com> Signed-off-by: Josef Bacik <jbacik@fusionio.com>
2013-05-17 11:53:43 +08:00
* COMMIT_DOING so make sure to wait for num_writers to == 1 again.
*/
spin_lock(&fs_info->trans_lock);
btrfs: fix use-after-free after failure to create a snapshot At ioctl.c:create_snapshot(), we allocate a pending snapshot structure and then attach it to the transaction's list of pending snapshots. After that we call btrfs_commit_transaction(), and if that returns an error we jump to 'fail' label, where we kfree() the pending snapshot structure. This can result in a later use-after-free of the pending snapshot: 1) We allocated the pending snapshot and added it to the transaction's list of pending snapshots; 2) We call btrfs_commit_transaction(), and it fails either at the first call to btrfs_run_delayed_refs() or btrfs_start_dirty_block_groups(). In both cases, we don't abort the transaction and we release our transaction handle. We jump to the 'fail' label and free the pending snapshot structure. We return with the pending snapshot still in the transaction's list; 3) Another task commits the transaction. This time there's no error at all, and then during the transaction commit it accesses a pointer to the pending snapshot structure that the snapshot creation task has already freed, resulting in a user-after-free. This issue could actually be detected by smatch, which produced the following warning: fs/btrfs/ioctl.c:843 create_snapshot() warn: '&pending_snapshot->list' not removed from list So fix this by not having the snapshot creation ioctl directly add the pending snapshot to the transaction's list. Instead add the pending snapshot to the transaction handle, and then at btrfs_commit_transaction() we add the snapshot to the list only when we can guarantee that any error returned after that point will result in a transaction abort, in which case the ioctl code can safely free the pending snapshot and no one can access it anymore. CC: stable@vger.kernel.org # 5.10+ Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2022-01-21 23:44:39 +08:00
add_pending_snapshot(trans);
Btrfs: make the state of the transaction more readable We used 3 variants to track the state of the transaction, it was complex and wasted the memory space. Besides that, it was hard to understand that which types of the transaction handles should be blocked in each transaction state, so the developers often made mistakes. This patch improved the above problem. In this patch, we define 6 states for the transaction, enum btrfs_trans_state { TRANS_STATE_RUNNING = 0, TRANS_STATE_BLOCKED = 1, TRANS_STATE_COMMIT_START = 2, TRANS_STATE_COMMIT_DOING = 3, TRANS_STATE_UNBLOCKED = 4, TRANS_STATE_COMPLETED = 5, TRANS_STATE_MAX = 6, } and just use 1 variant to track those state. In order to make the blocked handle types for each state more clear, we introduce a array: unsigned int btrfs_blocked_trans_types[TRANS_STATE_MAX] = { [TRANS_STATE_RUNNING] = 0U, [TRANS_STATE_BLOCKED] = (__TRANS_USERSPACE | __TRANS_START), [TRANS_STATE_COMMIT_START] = (__TRANS_USERSPACE | __TRANS_START | __TRANS_ATTACH), [TRANS_STATE_COMMIT_DOING] = (__TRANS_USERSPACE | __TRANS_START | __TRANS_ATTACH | __TRANS_JOIN), [TRANS_STATE_UNBLOCKED] = (__TRANS_USERSPACE | __TRANS_START | __TRANS_ATTACH | __TRANS_JOIN | __TRANS_JOIN_NOLOCK), [TRANS_STATE_COMPLETED] = (__TRANS_USERSPACE | __TRANS_START | __TRANS_ATTACH | __TRANS_JOIN | __TRANS_JOIN_NOLOCK), } it is very intuitionistic. Besides that, because we remove ->in_commit in transaction structure, so the lock ->commit_lock which was used to protect it is unnecessary, remove ->commit_lock. Signed-off-by: Miao Xie <miaox@cn.fujitsu.com> Signed-off-by: Josef Bacik <jbacik@fusionio.com>
2013-05-17 11:53:43 +08:00
cur_trans->state = TRANS_STATE_COMMIT_DOING;
spin_unlock(&fs_info->trans_lock);
wait_event(cur_trans->writer_wait,
atomic_read(&cur_trans->num_writers) == 1);
/*
* We've started the commit, clear the flag in case we were triggered to
* do an async commit but somebody else started before the transaction
* kthread could do the work.
*/
clear_bit(BTRFS_FS_COMMIT_TRANS, &fs_info->flags);
if (TRANS_ABORTED(cur_trans)) {
ret = cur_trans->aborted;
goto scrub_continue;
}
/*
* the reloc mutex makes sure that we stop
* the balancing code from coming in and moving
* extents around in the middle of the commit
*/
mutex_lock(&fs_info->reloc_mutex);
/*
* We needn't worry about the delayed items because we will
* deal with them in create_pending_snapshot(), which is the
* core function of the snapshot creation.
*/
ret = create_pending_snapshots(trans);
if (ret)
goto unlock_reloc;
/*
* We insert the dir indexes of the snapshots and update the inode
* of the snapshots' parents after the snapshot creation, so there
* are some delayed items which are not dealt with. Now deal with
* them.
*
* We needn't worry that this operation will corrupt the snapshots,
* because all the tree which are snapshoted will be forced to COW
* the nodes and leaves.
*/
ret = btrfs_run_delayed_items(trans);
if (ret)
goto unlock_reloc;
btrfs: implement delayed inode items operation Changelog V5 -> V6: - Fix oom when the memory load is high, by storing the delayed nodes into the root's radix tree, and letting btrfs inodes go. Changelog V4 -> V5: - Fix the race on adding the delayed node to the inode, which is spotted by Chris Mason. - Merge Chris Mason's incremental patch into this patch. - Fix deadlock between readdir() and memory fault, which is reported by Itaru Kitayama. Changelog V3 -> V4: - Fix nested lock, which is reported by Itaru Kitayama, by updating space cache inode in time. Changelog V2 -> V3: - Fix the race between the delayed worker and the task which does delayed items balance, which is reported by Tsutomu Itoh. - Modify the patch address David Sterba's comment. - Fix the bug of the cpu recursion spinlock, reported by Chris Mason Changelog V1 -> V2: - break up the global rb-tree, use a list to manage the delayed nodes, which is created for every directory and file, and used to manage the delayed directory name index items and the delayed inode item. - introduce a worker to deal with the delayed nodes. Compare with Ext3/4, the performance of file creation and deletion on btrfs is very poor. the reason is that btrfs must do a lot of b+ tree insertions, such as inode item, directory name item, directory name index and so on. If we can do some delayed b+ tree insertion or deletion, we can improve the performance, so we made this patch which implemented delayed directory name index insertion/deletion and delayed inode update. Implementation: - introduce a delayed root object into the filesystem, that use two lists to manage the delayed nodes which are created for every file/directory. One is used to manage all the delayed nodes that have delayed items. And the other is used to manage the delayed nodes which is waiting to be dealt with by the work thread. - Every delayed node has two rb-tree, one is used to manage the directory name index which is going to be inserted into b+ tree, and the other is used to manage the directory name index which is going to be deleted from b+ tree. - introduce a worker to deal with the delayed operation. This worker is used to deal with the works of the delayed directory name index items insertion and deletion and the delayed inode update. When the delayed items is beyond the lower limit, we create works for some delayed nodes and insert them into the work queue of the worker, and then go back. When the delayed items is beyond the upper bound, we create works for all the delayed nodes that haven't been dealt with, and insert them into the work queue of the worker, and then wait for that the untreated items is below some threshold value. - When we want to insert a directory name index into b+ tree, we just add the information into the delayed inserting rb-tree. And then we check the number of the delayed items and do delayed items balance. (The balance policy is above.) - When we want to delete a directory name index from the b+ tree, we search it in the inserting rb-tree at first. If we look it up, just drop it. If not, add the key of it into the delayed deleting rb-tree. Similar to the delayed inserting rb-tree, we also check the number of the delayed items and do delayed items balance. (The same to inserting manipulation) - When we want to update the metadata of some inode, we cached the data of the inode into the delayed node. the worker will flush it into the b+ tree after dealing with the delayed insertion and deletion. - We will move the delayed node to the tail of the list after we access the delayed node, By this way, we can cache more delayed items and merge more inode updates. - If we want to commit transaction, we will deal with all the delayed node. - the delayed node will be freed when we free the btrfs inode. - Before we log the inode items, we commit all the directory name index items and the delayed inode update. I did a quick test by the benchmark tool[1] and found we can improve the performance of file creation by ~15%, and file deletion by ~20%. Before applying this patch: Create files: Total files: 50000 Total time: 1.096108 Average time: 0.000022 Delete files: Total files: 50000 Total time: 1.510403 Average time: 0.000030 After applying this patch: Create files: Total files: 50000 Total time: 0.932899 Average time: 0.000019 Delete files: Total files: 50000 Total time: 1.215732 Average time: 0.000024 [1] http://marc.info/?l=linux-btrfs&m=128212635122920&q=p3 Many thanks for Kitayama-san's help! Signed-off-by: Miao Xie <miaox@cn.fujitsu.com> Reviewed-by: David Sterba <dave@jikos.cz> Tested-by: Tsutomu Itoh <t-itoh@jp.fujitsu.com> Tested-by: Itaru Kitayama <kitayama@cl.bb4u.ne.jp> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2011-04-22 18:12:22 +08:00
ret = btrfs_run_delayed_refs(trans, (unsigned long)-1);
if (ret)
goto unlock_reloc;
Btrfs: do extent allocation and reference count updates in the background The extent allocation tree maintains a reference count and full back reference information for every extent allocated in the filesystem. For subvolume and snapshot trees, every time a block goes through COW, the new copy of the block adds a reference on every block it points to. If a btree node points to 150 leaves, then the COW code needs to go and add backrefs on 150 different extents, which might be spread all over the extent allocation tree. These updates currently happen during btrfs_cow_block, and most COWs happen during btrfs_search_slot. btrfs_search_slot has locks held on both the parent and the node we are COWing, and so we really want to avoid IO during the COW if we can. This commit adds an rbtree of pending reference count updates and extent allocations. The tree is ordered by byte number of the extent and byte number of the parent for the back reference. The tree allows us to: 1) Modify back references in something close to disk order, reducing seeks 2) Significantly reduce the number of modifications made as block pointers are balanced around 3) Do all of the extent insertion and back reference modifications outside of the performance critical btrfs_search_slot code. #3 has the added benefit of greatly reducing the btrfs stack footprint. The extent allocation tree modifications are done without the deep (and somewhat recursive) call chains used in the past. These delayed back reference updates must be done before the transaction commits, and so the rbtree is tied to the transaction. Throttling is implemented to help keep the queue of backrefs at a reasonable size. Since there was a similar mechanism in place for the extent tree extents, that is removed and replaced by the delayed reference tree. Yan Zheng <yan.zheng@oracle.com> helped review and fixup this code. Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-03-13 22:10:06 +08:00
/*
* make sure none of the code above managed to slip in a
* delayed item
*/
btrfs_assert_delayed_root_empty(fs_info);
WARN_ON(cur_trans != trans->transaction);
ret = commit_fs_roots(trans);
if (ret)
btrfs: reduce the scope of the tree log mutex during transaction commit In the transaction commit path we are acquiring the tree log mutex too early and we have a stale comment because: 1) It mentions a function named btrfs_commit_tree_roots(), which does not exists anymore, it was the old name of commit_cowonly_roots(), renamed a very long time ago by commit 5d4f98a28c7d33 ("Btrfs: Mixed back reference (FORWARD ROLLING FORMAT CHANGE)")); 2) It mentions that we need to acquire the tree log mutex at that point to ensure we have no running log writers. That is not correct anymore, for many years at least, since we are guaranteed that we do not have any log writers at that point simply because we have set the state of the transaction to TRANS_STATE_COMMIT_DOING and have waited for all writers to complete - meaning no one can log until we change the state of the transaction to TRANS_STATE_UNBLOCKED. Any attempts to join the transaction or start a new one will block until we do that state transition; 3) The comment mentions a "trans mutex" which doesn't exists since 2011, commit a4abeea41adf ("Btrfs: kill trans_mutex") removed it; 4) The current use of the tree log mutex is to ensure proper serialization of super block writes - if someone started a new transaction and uses it for logging, it will wait for the previous transaction to write its super block before writing the super block when attempting to sync the log. So acquire the tree log mutex only when it's absolutely needed, before setting the transaction state to TRANS_STATE_UNBLOCKED, fix and move the stale comment, add some assertions and new comments where appropriate. Also, this has no effect on concurrency or performance, since the new start of the critical section is still when the transaction is in the state TRANS_STATE_COMMIT_DOING. Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2021-11-10 18:05:21 +08:00
goto unlock_reloc;
/*
* Since the transaction is done, we can apply the pending changes
* before the next transaction.
*/
btrfs_apply_pending_changes(fs_info);
Btrfs: Mixed back reference (FORWARD ROLLING FORMAT CHANGE) This commit introduces a new kind of back reference for btrfs metadata. Once a filesystem has been mounted with this commit, IT WILL NO LONGER BE MOUNTABLE BY OLDER KERNELS. When a tree block in subvolume tree is cow'd, the reference counts of all extents it points to are increased by one. At transaction commit time, the old root of the subvolume is recorded in a "dead root" data structure, and the btree it points to is later walked, dropping reference counts and freeing any blocks where the reference count goes to 0. The increments done during cow and decrements done after commit cancel out, and the walk is a very expensive way to go about freeing the blocks that are no longer referenced by the new btree root. This commit reduces the transaction overhead by avoiding the need for dead root records. When a non-shared tree block is cow'd, we free the old block at once, and the new block inherits old block's references. When a tree block with reference count > 1 is cow'd, we increase the reference counts of all extents the new block points to by one, and decrease the old block's reference count by one. This dead tree avoidance code removes the need to modify the reference counts of lower level extents when a non-shared tree block is cow'd. But we still need to update back ref for all pointers in the block. This is because the location of the block is recorded in the back ref item. We can solve this by introducing a new type of back ref. The new back ref provides information about pointer's key, level and in which tree the pointer lives. This information allow us to find the pointer by searching the tree. The shortcoming of the new back ref is that it only works for pointers in tree blocks referenced by their owner trees. This is mostly a problem for snapshots, where resolving one of these fuzzy back references would be O(number_of_snapshots) and quite slow. The solution used here is to use the fuzzy back references in the common case where a given tree block is only referenced by one root, and use the full back references when multiple roots have a reference on a given block. This commit adds per subvolume red-black tree to keep trace of cached inodes. The red-black tree helps the balancing code to find cached inodes whose inode numbers within a given range. This commit improves the balancing code by introducing several data structures to keep the state of balancing. The most important one is the back ref cache. It caches how the upper level tree blocks are referenced. This greatly reduce the overhead of checking back ref. The improved balancing code scales significantly better with a large number of snapshots. This is a very large commit and was written in a number of pieces. But, they depend heavily on the disk format change and were squashed together to make sure git bisect didn't end up in a bad state wrt space balancing or the format change. Signed-off-by: Yan Zheng <zheng.yan@oracle.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-06-10 22:45:14 +08:00
/* commit_fs_roots gets rid of all the tree log roots, it is now
* safe to free the root of tree log roots
*/
btrfs_free_log_root_tree(trans, fs_info);
/*
* Since fs roots are all committed, we can get a quite accurate
* new_roots. So let's do quota accounting.
*/
ret = btrfs_qgroup_account_extents(trans);
if (ret < 0)
btrfs: reduce the scope of the tree log mutex during transaction commit In the transaction commit path we are acquiring the tree log mutex too early and we have a stale comment because: 1) It mentions a function named btrfs_commit_tree_roots(), which does not exists anymore, it was the old name of commit_cowonly_roots(), renamed a very long time ago by commit 5d4f98a28c7d33 ("Btrfs: Mixed back reference (FORWARD ROLLING FORMAT CHANGE)")); 2) It mentions that we need to acquire the tree log mutex at that point to ensure we have no running log writers. That is not correct anymore, for many years at least, since we are guaranteed that we do not have any log writers at that point simply because we have set the state of the transaction to TRANS_STATE_COMMIT_DOING and have waited for all writers to complete - meaning no one can log until we change the state of the transaction to TRANS_STATE_UNBLOCKED. Any attempts to join the transaction or start a new one will block until we do that state transition; 3) The comment mentions a "trans mutex" which doesn't exists since 2011, commit a4abeea41adf ("Btrfs: kill trans_mutex") removed it; 4) The current use of the tree log mutex is to ensure proper serialization of super block writes - if someone started a new transaction and uses it for logging, it will wait for the previous transaction to write its super block before writing the super block when attempting to sync the log. So acquire the tree log mutex only when it's absolutely needed, before setting the transaction state to TRANS_STATE_UNBLOCKED, fix and move the stale comment, add some assertions and new comments where appropriate. Also, this has no effect on concurrency or performance, since the new start of the critical section is still when the transaction is in the state TRANS_STATE_COMMIT_DOING. Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2021-11-10 18:05:21 +08:00
goto unlock_reloc;
ret = commit_cowonly_roots(trans);
if (ret)
btrfs: reduce the scope of the tree log mutex during transaction commit In the transaction commit path we are acquiring the tree log mutex too early and we have a stale comment because: 1) It mentions a function named btrfs_commit_tree_roots(), which does not exists anymore, it was the old name of commit_cowonly_roots(), renamed a very long time ago by commit 5d4f98a28c7d33 ("Btrfs: Mixed back reference (FORWARD ROLLING FORMAT CHANGE)")); 2) It mentions that we need to acquire the tree log mutex at that point to ensure we have no running log writers. That is not correct anymore, for many years at least, since we are guaranteed that we do not have any log writers at that point simply because we have set the state of the transaction to TRANS_STATE_COMMIT_DOING and have waited for all writers to complete - meaning no one can log until we change the state of the transaction to TRANS_STATE_UNBLOCKED. Any attempts to join the transaction or start a new one will block until we do that state transition; 3) The comment mentions a "trans mutex" which doesn't exists since 2011, commit a4abeea41adf ("Btrfs: kill trans_mutex") removed it; 4) The current use of the tree log mutex is to ensure proper serialization of super block writes - if someone started a new transaction and uses it for logging, it will wait for the previous transaction to write its super block before writing the super block when attempting to sync the log. So acquire the tree log mutex only when it's absolutely needed, before setting the transaction state to TRANS_STATE_UNBLOCKED, fix and move the stale comment, add some assertions and new comments where appropriate. Also, this has no effect on concurrency or performance, since the new start of the critical section is still when the transaction is in the state TRANS_STATE_COMMIT_DOING. Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2021-11-10 18:05:21 +08:00
goto unlock_reloc;
/*
* The tasks which save the space cache and inode cache may also
* update ->aborted, check it.
*/
if (TRANS_ABORTED(cur_trans)) {
ret = cur_trans->aborted;
btrfs: reduce the scope of the tree log mutex during transaction commit In the transaction commit path we are acquiring the tree log mutex too early and we have a stale comment because: 1) It mentions a function named btrfs_commit_tree_roots(), which does not exists anymore, it was the old name of commit_cowonly_roots(), renamed a very long time ago by commit 5d4f98a28c7d33 ("Btrfs: Mixed back reference (FORWARD ROLLING FORMAT CHANGE)")); 2) It mentions that we need to acquire the tree log mutex at that point to ensure we have no running log writers. That is not correct anymore, for many years at least, since we are guaranteed that we do not have any log writers at that point simply because we have set the state of the transaction to TRANS_STATE_COMMIT_DOING and have waited for all writers to complete - meaning no one can log until we change the state of the transaction to TRANS_STATE_UNBLOCKED. Any attempts to join the transaction or start a new one will block until we do that state transition; 3) The comment mentions a "trans mutex" which doesn't exists since 2011, commit a4abeea41adf ("Btrfs: kill trans_mutex") removed it; 4) The current use of the tree log mutex is to ensure proper serialization of super block writes - if someone started a new transaction and uses it for logging, it will wait for the previous transaction to write its super block before writing the super block when attempting to sync the log. So acquire the tree log mutex only when it's absolutely needed, before setting the transaction state to TRANS_STATE_UNBLOCKED, fix and move the stale comment, add some assertions and new comments where appropriate. Also, this has no effect on concurrency or performance, since the new start of the critical section is still when the transaction is in the state TRANS_STATE_COMMIT_DOING. Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2021-11-10 18:05:21 +08:00
goto unlock_reloc;
}
cur_trans = fs_info->running_transaction;
Btrfs: Mixed back reference (FORWARD ROLLING FORMAT CHANGE) This commit introduces a new kind of back reference for btrfs metadata. Once a filesystem has been mounted with this commit, IT WILL NO LONGER BE MOUNTABLE BY OLDER KERNELS. When a tree block in subvolume tree is cow'd, the reference counts of all extents it points to are increased by one. At transaction commit time, the old root of the subvolume is recorded in a "dead root" data structure, and the btree it points to is later walked, dropping reference counts and freeing any blocks where the reference count goes to 0. The increments done during cow and decrements done after commit cancel out, and the walk is a very expensive way to go about freeing the blocks that are no longer referenced by the new btree root. This commit reduces the transaction overhead by avoiding the need for dead root records. When a non-shared tree block is cow'd, we free the old block at once, and the new block inherits old block's references. When a tree block with reference count > 1 is cow'd, we increase the reference counts of all extents the new block points to by one, and decrease the old block's reference count by one. This dead tree avoidance code removes the need to modify the reference counts of lower level extents when a non-shared tree block is cow'd. But we still need to update back ref for all pointers in the block. This is because the location of the block is recorded in the back ref item. We can solve this by introducing a new type of back ref. The new back ref provides information about pointer's key, level and in which tree the pointer lives. This information allow us to find the pointer by searching the tree. The shortcoming of the new back ref is that it only works for pointers in tree blocks referenced by their owner trees. This is mostly a problem for snapshots, where resolving one of these fuzzy back references would be O(number_of_snapshots) and quite slow. The solution used here is to use the fuzzy back references in the common case where a given tree block is only referenced by one root, and use the full back references when multiple roots have a reference on a given block. This commit adds per subvolume red-black tree to keep trace of cached inodes. The red-black tree helps the balancing code to find cached inodes whose inode numbers within a given range. This commit improves the balancing code by introducing several data structures to keep the state of balancing. The most important one is the back ref cache. It caches how the upper level tree blocks are referenced. This greatly reduce the overhead of checking back ref. The improved balancing code scales significantly better with a large number of snapshots. This is a very large commit and was written in a number of pieces. But, they depend heavily on the disk format change and were squashed together to make sure git bisect didn't end up in a bad state wrt space balancing or the format change. Signed-off-by: Yan Zheng <zheng.yan@oracle.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-06-10 22:45:14 +08:00
btrfs_set_root_node(&fs_info->tree_root->root_item,
fs_info->tree_root->node);
list_add_tail(&fs_info->tree_root->dirty_list,
&cur_trans->switch_commits);
Btrfs: Mixed back reference (FORWARD ROLLING FORMAT CHANGE) This commit introduces a new kind of back reference for btrfs metadata. Once a filesystem has been mounted with this commit, IT WILL NO LONGER BE MOUNTABLE BY OLDER KERNELS. When a tree block in subvolume tree is cow'd, the reference counts of all extents it points to are increased by one. At transaction commit time, the old root of the subvolume is recorded in a "dead root" data structure, and the btree it points to is later walked, dropping reference counts and freeing any blocks where the reference count goes to 0. The increments done during cow and decrements done after commit cancel out, and the walk is a very expensive way to go about freeing the blocks that are no longer referenced by the new btree root. This commit reduces the transaction overhead by avoiding the need for dead root records. When a non-shared tree block is cow'd, we free the old block at once, and the new block inherits old block's references. When a tree block with reference count > 1 is cow'd, we increase the reference counts of all extents the new block points to by one, and decrease the old block's reference count by one. This dead tree avoidance code removes the need to modify the reference counts of lower level extents when a non-shared tree block is cow'd. But we still need to update back ref for all pointers in the block. This is because the location of the block is recorded in the back ref item. We can solve this by introducing a new type of back ref. The new back ref provides information about pointer's key, level and in which tree the pointer lives. This information allow us to find the pointer by searching the tree. The shortcoming of the new back ref is that it only works for pointers in tree blocks referenced by their owner trees. This is mostly a problem for snapshots, where resolving one of these fuzzy back references would be O(number_of_snapshots) and quite slow. The solution used here is to use the fuzzy back references in the common case where a given tree block is only referenced by one root, and use the full back references when multiple roots have a reference on a given block. This commit adds per subvolume red-black tree to keep trace of cached inodes. The red-black tree helps the balancing code to find cached inodes whose inode numbers within a given range. This commit improves the balancing code by introducing several data structures to keep the state of balancing. The most important one is the back ref cache. It caches how the upper level tree blocks are referenced. This greatly reduce the overhead of checking back ref. The improved balancing code scales significantly better with a large number of snapshots. This is a very large commit and was written in a number of pieces. But, they depend heavily on the disk format change and were squashed together to make sure git bisect didn't end up in a bad state wrt space balancing or the format change. Signed-off-by: Yan Zheng <zheng.yan@oracle.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-06-10 22:45:14 +08:00
btrfs_set_root_node(&fs_info->chunk_root->root_item,
fs_info->chunk_root->node);
list_add_tail(&fs_info->chunk_root->dirty_list,
&cur_trans->switch_commits);
if (btrfs_fs_incompat(fs_info, EXTENT_TREE_V2)) {
btrfs_set_root_node(&fs_info->block_group_root->root_item,
fs_info->block_group_root->node);
list_add_tail(&fs_info->block_group_root->dirty_list,
&cur_trans->switch_commits);
}
switch_commit_roots(trans);
Btrfs: Mixed back reference (FORWARD ROLLING FORMAT CHANGE) This commit introduces a new kind of back reference for btrfs metadata. Once a filesystem has been mounted with this commit, IT WILL NO LONGER BE MOUNTABLE BY OLDER KERNELS. When a tree block in subvolume tree is cow'd, the reference counts of all extents it points to are increased by one. At transaction commit time, the old root of the subvolume is recorded in a "dead root" data structure, and the btree it points to is later walked, dropping reference counts and freeing any blocks where the reference count goes to 0. The increments done during cow and decrements done after commit cancel out, and the walk is a very expensive way to go about freeing the blocks that are no longer referenced by the new btree root. This commit reduces the transaction overhead by avoiding the need for dead root records. When a non-shared tree block is cow'd, we free the old block at once, and the new block inherits old block's references. When a tree block with reference count > 1 is cow'd, we increase the reference counts of all extents the new block points to by one, and decrease the old block's reference count by one. This dead tree avoidance code removes the need to modify the reference counts of lower level extents when a non-shared tree block is cow'd. But we still need to update back ref for all pointers in the block. This is because the location of the block is recorded in the back ref item. We can solve this by introducing a new type of back ref. The new back ref provides information about pointer's key, level and in which tree the pointer lives. This information allow us to find the pointer by searching the tree. The shortcoming of the new back ref is that it only works for pointers in tree blocks referenced by their owner trees. This is mostly a problem for snapshots, where resolving one of these fuzzy back references would be O(number_of_snapshots) and quite slow. The solution used here is to use the fuzzy back references in the common case where a given tree block is only referenced by one root, and use the full back references when multiple roots have a reference on a given block. This commit adds per subvolume red-black tree to keep trace of cached inodes. The red-black tree helps the balancing code to find cached inodes whose inode numbers within a given range. This commit improves the balancing code by introducing several data structures to keep the state of balancing. The most important one is the back ref cache. It caches how the upper level tree blocks are referenced. This greatly reduce the overhead of checking back ref. The improved balancing code scales significantly better with a large number of snapshots. This is a very large commit and was written in a number of pieces. But, they depend heavily on the disk format change and were squashed together to make sure git bisect didn't end up in a bad state wrt space balancing or the format change. Signed-off-by: Yan Zheng <zheng.yan@oracle.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-06-10 22:45:14 +08:00
ASSERT(list_empty(&cur_trans->dirty_bgs));
ASSERT(list_empty(&cur_trans->io_bgs));
update_super_roots(fs_info);
btrfs_set_super_log_root(fs_info->super_copy, 0);
btrfs_set_super_log_root_level(fs_info->super_copy, 0);
memcpy(fs_info->super_for_commit, fs_info->super_copy,
sizeof(*fs_info->super_copy));
btrfs_commit_device_sizes(cur_trans);
clear_bit(BTRFS_FS_LOG1_ERR, &fs_info->flags);
clear_bit(BTRFS_FS_LOG2_ERR, &fs_info->flags);
Btrfs: be aware of btree inode write errors to avoid fs corruption While we have a transaction ongoing, the VM might decide at any time to call btree_inode->i_mapping->a_ops->writepages(), which will start writeback of dirty pages belonging to btree nodes/leafs. This call might return an error or the writeback might finish with an error before we attempt to commit the running transaction. If this happens, we might have no way of knowing that such error happened when we are committing the transaction - because the pages might no longer be marked dirty nor tagged for writeback (if a subsequent modification to the extent buffer didn't happen before the transaction commit) which makes filemap_fdata[write|wait]_range unable to find such pages (even if they're marked with SetPageError). So if this happens we must abort the transaction, otherwise we commit a super block with btree roots that point to btree nodes/leafs whose content on disk is invalid - either garbage or the content of some node/leaf from a past generation that got cowed or deleted and is no longer valid (for this later case we end up getting error messages like "parent transid verify failed on 10826481664 wanted 25748 found 29562" when reading btree nodes/leafs from disk). Note that setting and checking AS_EIO/AS_ENOSPC in the btree inode's i_mapping would not be enough because we need to distinguish between log tree extents (not fatal) vs non-log tree extents (fatal) and because the next call to filemap_fdatawait_range() will catch and clear such errors in the mapping - and that call might be from a log sync and not from a transaction commit, which means we would not know about the error at transaction commit time. Also, checking for the eb flag EXTENT_BUFFER_IOERR at transaction commit time isn't done and would not be completely reliable, as the eb might be removed from memory and read back when trying to get it, which clears that flag right before reading the eb's pages from disk, making us not know about the previous write error. Using the new 3 flags for the btree inode also makes us achieve the goal of AS_EIO/AS_ENOSPC when writepages() returns success, started writeback for all dirty pages and before filemap_fdatawait_range() is called, the writeback for all dirty pages had already finished with errors - because we were not using AS_EIO/AS_ENOSPC, filemap_fdatawait_range() would return success, as it could not know that writeback errors happened (the pages were no longer tagged for writeback). Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: Chris Mason <clm@fb.com>
2014-09-26 19:25:56 +08:00
Btrfs: fix -ENOSPC when finishing block group creation While creating a block group, we often end up getting ENOSPC while updating the chunk tree, which leads to a transaction abortion that produces a trace like the following: [30670.116368] WARNING: CPU: 4 PID: 20735 at fs/btrfs/super.c:260 __btrfs_abort_transaction+0x52/0x106 [btrfs]() [30670.117777] BTRFS: Transaction aborted (error -28) (...) [30670.163567] Call Trace: [30670.163906] [<ffffffff8142fa46>] dump_stack+0x4f/0x7b [30670.164522] [<ffffffff8108b6a2>] ? console_unlock+0x361/0x3ad [30670.165171] [<ffffffff81045ea5>] warn_slowpath_common+0xa1/0xbb [30670.166323] [<ffffffffa035daa7>] ? __btrfs_abort_transaction+0x52/0x106 [btrfs] [30670.167213] [<ffffffff81045f05>] warn_slowpath_fmt+0x46/0x48 [30670.167862] [<ffffffffa035daa7>] __btrfs_abort_transaction+0x52/0x106 [btrfs] [30670.169116] [<ffffffffa03743d7>] btrfs_create_pending_block_groups+0x101/0x130 [btrfs] [30670.170593] [<ffffffffa038426a>] __btrfs_end_transaction+0x84/0x366 [btrfs] [30670.171960] [<ffffffffa038455c>] btrfs_end_transaction+0x10/0x12 [btrfs] [30670.174649] [<ffffffffa036eb6b>] btrfs_check_data_free_space+0x11f/0x27c [btrfs] [30670.176092] [<ffffffffa039450d>] btrfs_fallocate+0x7c8/0xb96 [btrfs] [30670.177218] [<ffffffff812459f2>] ? __this_cpu_preempt_check+0x13/0x15 [30670.178622] [<ffffffff81152447>] vfs_fallocate+0x14c/0x1de [30670.179642] [<ffffffff8116b915>] ? __fget_light+0x2d/0x4f [30670.180692] [<ffffffff81152863>] SyS_fallocate+0x47/0x62 [30670.186737] [<ffffffff81435b32>] system_call_fastpath+0x12/0x17 [30670.187792] ---[ end trace 0373e6b491c4a8cc ]--- This is because we don't do proper space reservation for the chunk block reserve when we have multiple tasks allocating chunks in parallel. So block group creation has 2 phases, and the first phase essentially checks if there is enough space in the system space_info, allocating a new system chunk if there isn't, while the second phase updates the device, extent and chunk trees. However, because the updates to the chunk tree happen in the second phase, if we have N tasks, each with its own transaction handle, allocating new chunks in parallel and if there is only enough space in the system space_info to allocate M chunks, where M < N, none of the tasks ends up allocating a new system chunk in the first phase and N - M tasks will get -ENOSPC when attempting to update the chunk tree in phase 2 if they need to COW any nodes/leafs from the chunk tree. Fix this by doing proper reservation in the chunk block reserve. The issue could be reproduced by running fstests generic/038 in a loop, which eventually triggered the problem. Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: Chris Mason <clm@fb.com>
2015-05-20 21:01:54 +08:00
btrfs_trans_release_chunk_metadata(trans);
btrfs: reduce the scope of the tree log mutex during transaction commit In the transaction commit path we are acquiring the tree log mutex too early and we have a stale comment because: 1) It mentions a function named btrfs_commit_tree_roots(), which does not exists anymore, it was the old name of commit_cowonly_roots(), renamed a very long time ago by commit 5d4f98a28c7d33 ("Btrfs: Mixed back reference (FORWARD ROLLING FORMAT CHANGE)")); 2) It mentions that we need to acquire the tree log mutex at that point to ensure we have no running log writers. That is not correct anymore, for many years at least, since we are guaranteed that we do not have any log writers at that point simply because we have set the state of the transaction to TRANS_STATE_COMMIT_DOING and have waited for all writers to complete - meaning no one can log until we change the state of the transaction to TRANS_STATE_UNBLOCKED. Any attempts to join the transaction or start a new one will block until we do that state transition; 3) The comment mentions a "trans mutex" which doesn't exists since 2011, commit a4abeea41adf ("Btrfs: kill trans_mutex") removed it; 4) The current use of the tree log mutex is to ensure proper serialization of super block writes - if someone started a new transaction and uses it for logging, it will wait for the previous transaction to write its super block before writing the super block when attempting to sync the log. So acquire the tree log mutex only when it's absolutely needed, before setting the transaction state to TRANS_STATE_UNBLOCKED, fix and move the stale comment, add some assertions and new comments where appropriate. Also, this has no effect on concurrency or performance, since the new start of the critical section is still when the transaction is in the state TRANS_STATE_COMMIT_DOING. Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2021-11-10 18:05:21 +08:00
/*
* Before changing the transaction state to TRANS_STATE_UNBLOCKED and
* setting fs_info->running_transaction to NULL, lock tree_log_mutex to
* make sure that before we commit our superblock, no other task can
* start a new transaction and commit a log tree before we commit our
* superblock. Anyone trying to commit a log tree locks this mutex before
* writing its superblock.
*/
mutex_lock(&fs_info->tree_log_mutex);
spin_lock(&fs_info->trans_lock);
Btrfs: make the state of the transaction more readable We used 3 variants to track the state of the transaction, it was complex and wasted the memory space. Besides that, it was hard to understand that which types of the transaction handles should be blocked in each transaction state, so the developers often made mistakes. This patch improved the above problem. In this patch, we define 6 states for the transaction, enum btrfs_trans_state { TRANS_STATE_RUNNING = 0, TRANS_STATE_BLOCKED = 1, TRANS_STATE_COMMIT_START = 2, TRANS_STATE_COMMIT_DOING = 3, TRANS_STATE_UNBLOCKED = 4, TRANS_STATE_COMPLETED = 5, TRANS_STATE_MAX = 6, } and just use 1 variant to track those state. In order to make the blocked handle types for each state more clear, we introduce a array: unsigned int btrfs_blocked_trans_types[TRANS_STATE_MAX] = { [TRANS_STATE_RUNNING] = 0U, [TRANS_STATE_BLOCKED] = (__TRANS_USERSPACE | __TRANS_START), [TRANS_STATE_COMMIT_START] = (__TRANS_USERSPACE | __TRANS_START | __TRANS_ATTACH), [TRANS_STATE_COMMIT_DOING] = (__TRANS_USERSPACE | __TRANS_START | __TRANS_ATTACH | __TRANS_JOIN), [TRANS_STATE_UNBLOCKED] = (__TRANS_USERSPACE | __TRANS_START | __TRANS_ATTACH | __TRANS_JOIN | __TRANS_JOIN_NOLOCK), [TRANS_STATE_COMPLETED] = (__TRANS_USERSPACE | __TRANS_START | __TRANS_ATTACH | __TRANS_JOIN | __TRANS_JOIN_NOLOCK), } it is very intuitionistic. Besides that, because we remove ->in_commit in transaction structure, so the lock ->commit_lock which was used to protect it is unnecessary, remove ->commit_lock. Signed-off-by: Miao Xie <miaox@cn.fujitsu.com> Signed-off-by: Josef Bacik <jbacik@fusionio.com>
2013-05-17 11:53:43 +08:00
cur_trans->state = TRANS_STATE_UNBLOCKED;
fs_info->running_transaction = NULL;
spin_unlock(&fs_info->trans_lock);
mutex_unlock(&fs_info->reloc_mutex);
wake_up(&fs_info->transaction_wait);
ret = btrfs_write_and_wait_transaction(trans);
if (ret) {
btrfs_handle_fs_error(fs_info, ret,
"Error while writing out transaction");
mutex_unlock(&fs_info->tree_log_mutex);
goto scrub_continue;
}
/*
* At this point, we should have written all the tree blocks allocated
* in this transaction. So it's now safe to free the redirtyied extent
* buffers.
*/
btrfs_free_redirty_list(cur_trans);
ret = write_all_supers(fs_info, 0);
/*
* the super is written, we can safely allow the tree-loggers
* to go about their business
*/
mutex_unlock(&fs_info->tree_log_mutex);
if (ret)
goto scrub_continue;
btrfs: make concurrent fsyncs wait less when waiting for a transaction commit Often an fsync needs to fallback to a transaction commit for several reasons (to ensure consistency after a power failure, a new block group was allocated or a temporary error such as ENOMEM or ENOSPC happened). In that case the log is marked as needing a full commit and any concurrent tasks attempting to log inodes or commit the log will also fallback to the transaction commit. When this happens they all wait for the task that first started the transaction commit to finish the transaction commit - however they wait until the full transaction commit happens, which is not needed, as they only need to wait for the superblocks to be persisted and not for unpinning all the extents pinned during the transaction's lifetime, which even for short lived transactions can be a few thousand and take some significant amount of time to complete - for dbench workloads I have observed up to 4~5 milliseconds of time spent unpinning extents in the worst cases, and the number of pinned extents was between 2 to 3 thousand. So allow fsync tasks to skip waiting for the unpinning of extents when they call btrfs_commit_transaction() and they were not the task that started the transaction commit (that one has to do it, the alternative would be to offload the transaction commit to another task so that it could avoid waiting for the extent unpinning or offload the extent unpinning to another task). This patch is part of a patchset comprised of the following patches: btrfs: remove unnecessary directory inode item update when deleting dir entry btrfs: stop setting nbytes when filling inode item for logging btrfs: avoid logging new ancestor inodes when logging new inode btrfs: skip logging directories already logged when logging all parents btrfs: skip logging inodes already logged when logging new entries btrfs: remove unnecessary check_parent_dirs_for_sync() btrfs: make concurrent fsyncs wait less when waiting for a transaction commit After applying the entire patchset, dbench shows improvements in respect to throughput and latency. The script used to measure it is the following: $ cat dbench-test.sh #!/bin/bash DEV=/dev/sdk MNT=/mnt/sdk MOUNT_OPTIONS="-o ssd" MKFS_OPTIONS="-m single -d single" echo "performance" | tee /sys/devices/system/cpu/cpu*/cpufreq/scaling_governor umount $DEV &> /dev/null mkfs.btrfs -f $MKFS_OPTIONS $DEV mount $MOUNT_OPTIONS $DEV $MNT dbench -D $MNT -t 300 64 umount $MNT The test was run on a physical machine with 12 cores (Intel corei7), 64G of ram, using a NVMe device and a non-debug kernel configuration (Debian's default configuration). Before applying patchset, 32 clients: Operation Count AvgLat MaxLat ---------------------------------------- NTCreateX 9627107 0.153 61.938 Close 7072076 0.001 3.175 Rename 407633 1.222 44.439 Unlink 1943895 0.658 44.440 Deltree 256 17.339 110.891 Mkdir 128 0.003 0.009 Qpathinfo 8725406 0.064 17.850 Qfileinfo 1529516 0.001 2.188 Qfsinfo 1599884 0.002 1.457 Sfileinfo 784200 0.005 3.562 Find 3373513 0.411 30.312 WriteX 4802132 0.053 29.054 ReadX 15089959 0.002 5.801 LockX 31344 0.002 0.425 UnlockX 31344 0.001 0.173 Flush 674724 5.952 341.830 Throughput 1008.02 MB/sec 32 clients 32 procs max_latency=341.833 ms After applying patchset, 32 clients: After patchset, with 32 clients: Operation Count AvgLat MaxLat ---------------------------------------- NTCreateX 9931568 0.111 25.597 Close 7295730 0.001 2.171 Rename 420549 0.982 49.714 Unlink 2005366 0.497 39.015 Deltree 256 11.149 89.242 Mkdir 128 0.002 0.014 Qpathinfo 9001863 0.049 20.761 Qfileinfo 1577730 0.001 2.546 Qfsinfo 1650508 0.002 3.531 Sfileinfo 809031 0.005 5.846 Find 3480259 0.309 23.977 WriteX 4952505 0.043 41.283 ReadX 15568127 0.002 5.476 LockX 32338 0.002 0.978 UnlockX 32338 0.001 2.032 Flush 696017 7.485 228.835 Throughput 1049.91 MB/sec 32 clients 32 procs max_latency=228.847 ms --> +4.1% throughput, -39.6% max latency Before applying patchset, 64 clients: Operation Count AvgLat MaxLat ---------------------------------------- NTCreateX 8956748 0.342 108.312 Close 6579660 0.001 3.823 Rename 379209 2.396 81.897 Unlink 1808625 1.108 131.148 Deltree 256 25.632 172.176 Mkdir 128 0.003 0.018 Qpathinfo 8117615 0.131 55.916 Qfileinfo 1423495 0.001 2.635 Qfsinfo 1488496 0.002 5.412 Sfileinfo 729472 0.007 8.643 Find 3138598 0.855 78.321 WriteX 4470783 0.102 79.442 ReadX 14038139 0.002 7.578 LockX 29158 0.002 0.844 UnlockX 29158 0.001 0.567 Flush 627746 14.168 506.151 Throughput 924.738 MB/sec 64 clients 64 procs max_latency=506.154 ms After applying patchset, 64 clients: Operation Count AvgLat MaxLat ---------------------------------------- NTCreateX 9069003 0.303 43.193 Close 6662328 0.001 3.888 Rename 383976 2.194 46.418 Unlink 1831080 1.022 43.873 Deltree 256 24.037 155.763 Mkdir 128 0.002 0.005 Qpathinfo 8219173 0.137 30.233 Qfileinfo 1441203 0.001 3.204 Qfsinfo 1507092 0.002 4.055 Sfileinfo 738775 0.006 5.431 Find 3177874 0.936 38.170 WriteX 4526152 0.084 39.518 ReadX 14213562 0.002 24.760 LockX 29522 0.002 1.221 UnlockX 29522 0.001 0.694 Flush 635652 14.358 422.039 Throughput 990.13 MB/sec 64 clients 64 procs max_latency=422.043 ms --> +6.8% throughput, -18.1% max latency Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2021-01-27 18:35:00 +08:00
/*
* We needn't acquire the lock here because there is no other task
* which can change it.
*/
cur_trans->state = TRANS_STATE_SUPER_COMMITTED;
wake_up(&cur_trans->commit_wait);
btrfs_finish_extent_commit(trans);
if (test_bit(BTRFS_TRANS_HAVE_FREE_BGS, &cur_trans->flags))
btrfs_clear_space_info_full(fs_info);
btrfs: Fix out-of-space bug Btrfs will report NO_SPACE when we create and remove files for several times, and we can't write to filesystem until mount it again. Steps to reproduce: 1: Create a single-dev btrfs fs with default option 2: Write a file into it to take up most fs space 3: Delete above file 4: Wait about 100s to let chunk removed 5: goto 2 Script is like following: #!/bin/bash # Recommend 1.2G space, too large disk will make test slow DEV="/dev/sda16" MNT="/mnt/tmp" dev_size="$(lsblk -bn -o SIZE "$DEV")" || exit 2 file_size_m=$((dev_size * 75 / 100 / 1024 / 1024)) echo "Loop write ${file_size_m}M file on $((dev_size / 1024 / 1024))M dev" for ((i = 0; i < 10; i++)); do umount "$MNT" 2>/dev/null; done echo "mkfs $DEV" mkfs.btrfs -f "$DEV" >/dev/null || exit 2 echo "mount $DEV $MNT" mount "$DEV" "$MNT" || exit 2 for ((loop_i = 0; loop_i < 20; loop_i++)); do echo echo "loop $loop_i" echo "dd file..." cmd=(dd if=/dev/zero of="$MNT"/file0 bs=1M count="$file_size_m") "${cmd[@]}" 2>/dev/null || { # NO_SPACE error triggered echo "dd failed: ${cmd[*]}" exit 1 } echo "rm file..." rm -f "$MNT"/file0 || exit 2 for ((i = 0; i < 10; i++)); do df "$MNT" | tail -1 sleep 10 done done Reason: It is triggered by commit: 47ab2a6c689913db23ccae38349714edf8365e0a which is used to remove empty block groups automatically, but the reason is not in that patch. Code before works well because btrfs don't need to create and delete chunks so many times with high complexity. Above bug is caused by many reason, any of them can trigger it. Reason1: When we remove some continuous chunks but leave other chunks after, these disk space should be used by chunk-recreating, but in current code, only first create will successed. Fixed by Forrest Liu <forrestl@synology.com> in: Btrfs: fix find_free_dev_extent() malfunction in case device tree has hole Reason2: contains_pending_extent() return wrong value in calculation. Fixed by Forrest Liu <forrestl@synology.com> in: Btrfs: fix find_free_dev_extent() malfunction in case device tree has hole Reason3: btrfs_check_data_free_space() try to commit transaction and retry allocating chunk when the first allocating failed, but space_info->full is set in first allocating, and prevent second allocating in retry. Fixed in this patch by clear space_info->full in commit transaction. Tested for severial times by above script. Changelog v3->v4: use light weight int instead of atomic_t to record have_remove_bgs in transaction, suggested by: Josef Bacik <jbacik@fb.com> Changelog v2->v3: v2 fixed the bug by adding more commit-transaction, but we only need to reclaim space when we are really have no space for new chunk, noticed by: Filipe David Manana <fdmanana@gmail.com> Actually, our code already have this type of commit-and-retry, we only need to make it working with removed-bgs. v3 fixed the bug with above way. Changelog v1->v2: v1 will introduce a new bug when delete and create chunk in same disk space in same transaction, noticed by: Filipe David Manana <fdmanana@gmail.com> V2 fix this bug by commit transaction after remove block grops. Reported-by: Tsutomu Itoh <t-itoh@jp.fujitsu.com> Suggested-by: Filipe David Manana <fdmanana@gmail.com> Suggested-by: Josef Bacik <jbacik@fb.com> Signed-off-by: Zhao Lei <zhaolei@cn.fujitsu.com> Signed-off-by: Chris Mason <clm@fb.com>
2015-02-12 14:18:17 +08:00
fs_info->last_trans_committed = cur_trans->transid;
Btrfs: make the state of the transaction more readable We used 3 variants to track the state of the transaction, it was complex and wasted the memory space. Besides that, it was hard to understand that which types of the transaction handles should be blocked in each transaction state, so the developers often made mistakes. This patch improved the above problem. In this patch, we define 6 states for the transaction, enum btrfs_trans_state { TRANS_STATE_RUNNING = 0, TRANS_STATE_BLOCKED = 1, TRANS_STATE_COMMIT_START = 2, TRANS_STATE_COMMIT_DOING = 3, TRANS_STATE_UNBLOCKED = 4, TRANS_STATE_COMPLETED = 5, TRANS_STATE_MAX = 6, } and just use 1 variant to track those state. In order to make the blocked handle types for each state more clear, we introduce a array: unsigned int btrfs_blocked_trans_types[TRANS_STATE_MAX] = { [TRANS_STATE_RUNNING] = 0U, [TRANS_STATE_BLOCKED] = (__TRANS_USERSPACE | __TRANS_START), [TRANS_STATE_COMMIT_START] = (__TRANS_USERSPACE | __TRANS_START | __TRANS_ATTACH), [TRANS_STATE_COMMIT_DOING] = (__TRANS_USERSPACE | __TRANS_START | __TRANS_ATTACH | __TRANS_JOIN), [TRANS_STATE_UNBLOCKED] = (__TRANS_USERSPACE | __TRANS_START | __TRANS_ATTACH | __TRANS_JOIN | __TRANS_JOIN_NOLOCK), [TRANS_STATE_COMPLETED] = (__TRANS_USERSPACE | __TRANS_START | __TRANS_ATTACH | __TRANS_JOIN | __TRANS_JOIN_NOLOCK), } it is very intuitionistic. Besides that, because we remove ->in_commit in transaction structure, so the lock ->commit_lock which was used to protect it is unnecessary, remove ->commit_lock. Signed-off-by: Miao Xie <miaox@cn.fujitsu.com> Signed-off-by: Josef Bacik <jbacik@fusionio.com>
2013-05-17 11:53:43 +08:00
/*
* We needn't acquire the lock here because there is no other task
* which can change it.
*/
cur_trans->state = TRANS_STATE_COMPLETED;
wake_up(&cur_trans->commit_wait);
spin_lock(&fs_info->trans_lock);
list_del_init(&cur_trans->list);
spin_unlock(&fs_info->trans_lock);
Btrfs: kill trans_mutex We use trans_mutex for lots of things, here's a basic list 1) To serialize trans_handles joining the currently running transaction 2) To make sure that no new trans handles are started while we are committing 3) To protect the dead_roots list and the transaction lists Really the serializing trans_handles joining is not too hard, and can really get bogged down in acquiring a reference to the transaction. So replace the trans_mutex with a trans_lock spinlock and use it to do the following 1) Protect fs_info->running_transaction. All trans handles have to do is check this, and then take a reference of the transaction and keep on going. 2) Protect the fs_info->trans_list. This doesn't get used too much, basically it just holds the current transactions, which will usually just be the currently committing transaction and the currently running transaction at most. 3) Protect the dead roots list. This is only ever processed by splicing the list so this is relatively simple. 4) Protect the fs_info->reloc_ctl stuff. This is very lightweight and was using the trans_mutex before, so this is a pretty straightforward change. 5) Protect fs_info->no_trans_join. Because we don't hold the trans_lock over the entirety of the commit we need to have a way to block new people from creating a new transaction while we're doing our work. So we set no_trans_join and in join_transaction we test to see if that is set, and if it is we do a wait_on_commit. 6) Make the transaction use count atomic so we don't need to take locks to modify it when we're dropping references. 7) Add a commit_lock to the transaction to make sure multiple people trying to commit the same transaction don't race and commit at the same time. 8) Make open_ioctl_trans an atomic so we don't have to take any locks for ioctl trans. I have tested this with xfstests, but obviously it is a pretty hairy change so lots of testing is greatly appreciated. Thanks, Signed-off-by: Josef Bacik <josef@redhat.com>
2011-04-12 05:25:13 +08:00
btrfs_put_transaction(cur_trans);
btrfs_put_transaction(cur_trans);
if (trans->type & __TRANS_FREEZABLE)
sb_end_intwrite(fs_info->sb);
trace_btrfs_transaction_commit(fs_info);
Btrfs: add initial tracepoint support for btrfs Tracepoints can provide insight into why btrfs hits bugs and be greatly helpful for debugging, e.g dd-7822 [000] 2121.641088: btrfs_inode_request: root = 5(FS_TREE), gen = 4, ino = 256, blocks = 8, disk_i_size = 0, last_trans = 8, logged_trans = 0 dd-7822 [000] 2121.641100: btrfs_inode_new: root = 5(FS_TREE), gen = 8, ino = 257, blocks = 0, disk_i_size = 0, last_trans = 0, logged_trans = 0 btrfs-transacti-7804 [001] 2146.935420: btrfs_cow_block: root = 2(EXTENT_TREE), refs = 2, orig_buf = 29368320 (orig_level = 0), cow_buf = 29388800 (cow_level = 0) btrfs-transacti-7804 [001] 2146.935473: btrfs_cow_block: root = 1(ROOT_TREE), refs = 2, orig_buf = 29364224 (orig_level = 0), cow_buf = 29392896 (cow_level = 0) btrfs-transacti-7804 [001] 2146.972221: btrfs_transaction_commit: root = 1(ROOT_TREE), gen = 8 flush-btrfs-2-7821 [001] 2155.824210: btrfs_chunk_alloc: root = 3(CHUNK_TREE), offset = 1103101952, size = 1073741824, num_stripes = 1, sub_stripes = 0, type = DATA flush-btrfs-2-7821 [001] 2155.824241: btrfs_cow_block: root = 2(EXTENT_TREE), refs = 2, orig_buf = 29388800 (orig_level = 0), cow_buf = 29396992 (cow_level = 0) flush-btrfs-2-7821 [001] 2155.824255: btrfs_cow_block: root = 4(DEV_TREE), refs = 2, orig_buf = 29372416 (orig_level = 0), cow_buf = 29401088 (cow_level = 0) flush-btrfs-2-7821 [000] 2155.824329: btrfs_cow_block: root = 3(CHUNK_TREE), refs = 2, orig_buf = 20971520 (orig_level = 0), cow_buf = 20975616 (cow_level = 0) btrfs-endio-wri-7800 [001] 2155.898019: btrfs_cow_block: root = 5(FS_TREE), refs = 2, orig_buf = 29384704 (orig_level = 0), cow_buf = 29405184 (cow_level = 0) btrfs-endio-wri-7800 [001] 2155.898043: btrfs_cow_block: root = 7(CSUM_TREE), refs = 2, orig_buf = 29376512 (orig_level = 0), cow_buf = 29409280 (cow_level = 0) Here is what I have added: 1) ordere_extent: btrfs_ordered_extent_add btrfs_ordered_extent_remove btrfs_ordered_extent_start btrfs_ordered_extent_put These provide critical information to understand how ordered_extents are updated. 2) extent_map: btrfs_get_extent extent_map is used in both read and write cases, and it is useful for tracking how btrfs specific IO is running. 3) writepage: __extent_writepage btrfs_writepage_end_io_hook Pages are cirtical resourses and produce a lot of corner cases during writeback, so it is valuable to know how page is written to disk. 4) inode: btrfs_inode_new btrfs_inode_request btrfs_inode_evict These can show where and when a inode is created, when a inode is evicted. 5) sync: btrfs_sync_file btrfs_sync_fs These show sync arguments. 6) transaction: btrfs_transaction_commit In transaction based filesystem, it will be useful to know the generation and who does commit. 7) back reference and cow: btrfs_delayed_tree_ref btrfs_delayed_data_ref btrfs_delayed_ref_head btrfs_cow_block Btrfs natively supports back references, these tracepoints are helpful on understanding btrfs's COW mechanism. 8) chunk: btrfs_chunk_alloc btrfs_chunk_free Chunk is a link between physical offset and logical offset, and stands for space infomation in btrfs, and these are helpful on tracing space things. 9) reserved_extent: btrfs_reserved_extent_alloc btrfs_reserved_extent_free These can show how btrfs uses its space. Signed-off-by: Liu Bo <liubo2009@cn.fujitsu.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2011-03-24 19:18:59 +08:00
btrfs_scrub_continue(fs_info);
Btrfs: proper -ENOSPC handling At the start of a transaction we do a btrfs_reserve_metadata_space() and specify how many items we plan on modifying. Then once we've done our modifications and such, just call btrfs_unreserve_metadata_space() for the same number of items we reserved. For keeping track of metadata needed for data I've had to add an extent_io op for when we merge extents. This lets us track space properly when we are doing sequential writes, so we don't end up reserving way more metadata space than what we need. The only place where the metadata space accounting is not done is in the relocation code. This is because Yan is going to be reworking that code in the near future, so running btrfs-vol -b could still possibly result in a ENOSPC related panic. This patch also turns off the metadata_ratio stuff in order to allow users to more efficiently use their disk space. This patch makes it so we track how much metadata we need for an inode's delayed allocation extents by tracking how many extents are currently waiting for allocation. It introduces two new callbacks for the extent_io tree's, merge_extent_hook and split_extent_hook. These help us keep track of when we merge delalloc extents together and split them up. Reservations are handled prior to any actually dirty'ing occurs, and then we unreserve after we dirty. btrfs_unreserve_metadata_for_delalloc() will make the appropriate unreservations as needed based on the number of reservations we currently have and the number of extents we currently have. Doing the reservation outside of doing any of the actual dirty'ing lets us do things like filemap_flush() the inode to try and force delalloc to happen, or as a last resort actually start allocation on all delalloc inodes in the fs. This has survived dbench, fs_mark and an fsx torture test. Signed-off-by: Josef Bacik <jbacik@redhat.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-09-12 04:12:44 +08:00
if (current->journal_info == trans)
current->journal_info = NULL;
kmem_cache_free(btrfs_trans_handle_cachep, trans);
return ret;
unlock_reloc:
mutex_unlock(&fs_info->reloc_mutex);
scrub_continue:
btrfs_scrub_continue(fs_info);
cleanup_transaction:
btrfs_trans_release_metadata(trans);
btrfs: clean up pending block groups when transaction commit aborts The fstests generic/475 stresses transaction aborts and can reveal space accounting or use-after-free bugs regarding block goups. In this case the pending block groups that remain linked to the structures after transaction commit aborts in the middle. The corrupted slabs lead to failures in following tests, eg. generic/476 [ 8172.752887] BUG: unable to handle kernel NULL pointer dereference at 0000000000000058 [ 8172.755799] #PF error: [normal kernel read fault] [ 8172.757571] PGD 661ae067 P4D 661ae067 PUD 3db8e067 PMD 0 [ 8172.759000] Oops: 0000 [#1] PREEMPT SMP [ 8172.760209] CPU: 0 PID: 39 Comm: kswapd0 Tainted: G W 5.0.0-rc2-default #408 [ 8172.762495] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.11.2-0-gf9626cc-prebuilt.qemu-project.org 04/01/2014 [ 8172.765772] RIP: 0010:shrink_page_list+0x2f9/0xe90 [ 8172.770453] RSP: 0018:ffff967f00663b18 EFLAGS: 00010287 [ 8172.771184] RAX: 0000000000000000 RBX: ffff967f00663c20 RCX: 0000000000000000 [ 8172.772850] RDX: 0000000000000000 RSI: 0000000000000001 RDI: ffff8c0620ab20e0 [ 8172.774629] RBP: ffff967f00663dd8 R08: 0000000000000000 R09: 0000000000000000 [ 8172.776094] R10: ffff8c0620ab22f8 R11: ffff8c063f772688 R12: ffff967f00663b78 [ 8172.777533] R13: ffff8c063f625600 R14: ffff8c063f625608 R15: dead000000000200 [ 8172.778886] FS: 0000000000000000(0000) GS:ffff8c063d400000(0000) knlGS:0000000000000000 [ 8172.780545] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 8172.781787] CR2: 0000000000000058 CR3: 000000004e962000 CR4: 00000000000006f0 [ 8172.783547] Call Trace: [ 8172.784112] shrink_inactive_list+0x194/0x410 [ 8172.784747] shrink_node_memcg.constprop.85+0x3a5/0x6a0 [ 8172.785472] shrink_node+0x62/0x1e0 [ 8172.786011] balance_pgdat+0x216/0x460 [ 8172.786577] kswapd+0xe3/0x4a0 [ 8172.787085] ? finish_wait+0x80/0x80 [ 8172.787795] ? balance_pgdat+0x460/0x460 [ 8172.788799] kthread+0x116/0x130 [ 8172.789640] ? kthread_create_on_node+0x60/0x60 [ 8172.790323] ret_from_fork+0x24/0x30 [ 8172.794253] CR2: 0000000000000058 or accounting errors at umount time: [ 8159.537251] WARNING: CPU: 2 PID: 19031 at fs/btrfs/extent-tree.c:5987 btrfs_free_block_groups+0x3d5/0x410 [btrfs] [ 8159.543325] CPU: 2 PID: 19031 Comm: umount Tainted: G W 5.0.0-rc2-default #408 [ 8159.545472] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.11.2-0-gf9626cc-prebuilt.qemu-project.org 04/01/2014 [ 8159.548155] RIP: 0010:btrfs_free_block_groups+0x3d5/0x410 [btrfs] [ 8159.554030] RSP: 0018:ffff967f079cbde8 EFLAGS: 00010206 [ 8159.555144] RAX: 0000000001000000 RBX: ffff8c06366cf800 RCX: 0000000000000000 [ 8159.556730] RDX: 0000000000000002 RSI: 0000000000000001 RDI: ffff8c06255ad800 [ 8159.558279] RBP: ffff8c0637ac0000 R08: 0000000000000001 R09: 0000000000000000 [ 8159.559797] R10: 0000000000000000 R11: 0000000000000001 R12: ffff8c0637ac0108 [ 8159.561296] R13: ffff8c0637ac0158 R14: 0000000000000000 R15: dead000000000100 [ 8159.562852] FS: 00007f7f693b9fc0(0000) GS:ffff8c063d800000(0000) knlGS:0000000000000000 [ 8159.564839] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 8159.566160] CR2: 00007f7f68fab7b0 CR3: 000000000aec7000 CR4: 00000000000006e0 [ 8159.567898] Call Trace: [ 8159.568597] close_ctree+0x17f/0x350 [btrfs] [ 8159.569628] generic_shutdown_super+0x64/0x100 [ 8159.570808] kill_anon_super+0x14/0x30 [ 8159.571857] btrfs_kill_super+0x12/0xa0 [btrfs] [ 8159.573063] deactivate_locked_super+0x29/0x60 [ 8159.574234] cleanup_mnt+0x3b/0x70 [ 8159.575176] task_work_run+0x98/0xc0 [ 8159.576177] exit_to_usermode_loop+0x83/0x90 [ 8159.577315] do_syscall_64+0x15b/0x180 [ 8159.578339] entry_SYSCALL_64_after_hwframe+0x49/0xbe This fix is based on 2 Josef's patches that used sideefects of btrfs_create_pending_block_groups, this fix introduces the helper that does what we need. CC: stable@vger.kernel.org # 4.4+ CC: Josef Bacik <josef@toxicpanda.com> Reviewed-by: Nikolay Borisov <nborisov@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2019-01-24 00:09:16 +08:00
btrfs_cleanup_pending_block_groups(trans);
Btrfs: fix -ENOSPC when finishing block group creation While creating a block group, we often end up getting ENOSPC while updating the chunk tree, which leads to a transaction abortion that produces a trace like the following: [30670.116368] WARNING: CPU: 4 PID: 20735 at fs/btrfs/super.c:260 __btrfs_abort_transaction+0x52/0x106 [btrfs]() [30670.117777] BTRFS: Transaction aborted (error -28) (...) [30670.163567] Call Trace: [30670.163906] [<ffffffff8142fa46>] dump_stack+0x4f/0x7b [30670.164522] [<ffffffff8108b6a2>] ? console_unlock+0x361/0x3ad [30670.165171] [<ffffffff81045ea5>] warn_slowpath_common+0xa1/0xbb [30670.166323] [<ffffffffa035daa7>] ? __btrfs_abort_transaction+0x52/0x106 [btrfs] [30670.167213] [<ffffffff81045f05>] warn_slowpath_fmt+0x46/0x48 [30670.167862] [<ffffffffa035daa7>] __btrfs_abort_transaction+0x52/0x106 [btrfs] [30670.169116] [<ffffffffa03743d7>] btrfs_create_pending_block_groups+0x101/0x130 [btrfs] [30670.170593] [<ffffffffa038426a>] __btrfs_end_transaction+0x84/0x366 [btrfs] [30670.171960] [<ffffffffa038455c>] btrfs_end_transaction+0x10/0x12 [btrfs] [30670.174649] [<ffffffffa036eb6b>] btrfs_check_data_free_space+0x11f/0x27c [btrfs] [30670.176092] [<ffffffffa039450d>] btrfs_fallocate+0x7c8/0xb96 [btrfs] [30670.177218] [<ffffffff812459f2>] ? __this_cpu_preempt_check+0x13/0x15 [30670.178622] [<ffffffff81152447>] vfs_fallocate+0x14c/0x1de [30670.179642] [<ffffffff8116b915>] ? __fget_light+0x2d/0x4f [30670.180692] [<ffffffff81152863>] SyS_fallocate+0x47/0x62 [30670.186737] [<ffffffff81435b32>] system_call_fastpath+0x12/0x17 [30670.187792] ---[ end trace 0373e6b491c4a8cc ]--- This is because we don't do proper space reservation for the chunk block reserve when we have multiple tasks allocating chunks in parallel. So block group creation has 2 phases, and the first phase essentially checks if there is enough space in the system space_info, allocating a new system chunk if there isn't, while the second phase updates the device, extent and chunk trees. However, because the updates to the chunk tree happen in the second phase, if we have N tasks, each with its own transaction handle, allocating new chunks in parallel and if there is only enough space in the system space_info to allocate M chunks, where M < N, none of the tasks ends up allocating a new system chunk in the first phase and N - M tasks will get -ENOSPC when attempting to update the chunk tree in phase 2 if they need to COW any nodes/leafs from the chunk tree. Fix this by doing proper reservation in the chunk block reserve. The issue could be reproduced by running fstests generic/038 in a loop, which eventually triggered the problem. Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: Chris Mason <clm@fb.com>
2015-05-20 21:01:54 +08:00
btrfs_trans_release_chunk_metadata(trans);
trans->block_rsv = NULL;
btrfs_warn(fs_info, "Skipping commit of aborted transaction.");
if (current->journal_info == trans)
current->journal_info = NULL;
cleanup_transaction(trans, ret);
return ret;
}
/*
* return < 0 if error
* 0 if there are no more dead_roots at the time of call
* 1 there are more to be processed, call me again
*
* The return value indicates there are certainly more snapshots to delete, but
* if there comes a new one during processing, it may return 0. We don't mind,
* because btrfs_commit_super will poke cleaner thread and it will process it a
* few seconds later.
*/
int btrfs_clean_one_deleted_snapshot(struct btrfs_fs_info *fs_info)
{
struct btrfs_root *root;
int ret;
Btrfs: Mixed back reference (FORWARD ROLLING FORMAT CHANGE) This commit introduces a new kind of back reference for btrfs metadata. Once a filesystem has been mounted with this commit, IT WILL NO LONGER BE MOUNTABLE BY OLDER KERNELS. When a tree block in subvolume tree is cow'd, the reference counts of all extents it points to are increased by one. At transaction commit time, the old root of the subvolume is recorded in a "dead root" data structure, and the btree it points to is later walked, dropping reference counts and freeing any blocks where the reference count goes to 0. The increments done during cow and decrements done after commit cancel out, and the walk is a very expensive way to go about freeing the blocks that are no longer referenced by the new btree root. This commit reduces the transaction overhead by avoiding the need for dead root records. When a non-shared tree block is cow'd, we free the old block at once, and the new block inherits old block's references. When a tree block with reference count > 1 is cow'd, we increase the reference counts of all extents the new block points to by one, and decrease the old block's reference count by one. This dead tree avoidance code removes the need to modify the reference counts of lower level extents when a non-shared tree block is cow'd. But we still need to update back ref for all pointers in the block. This is because the location of the block is recorded in the back ref item. We can solve this by introducing a new type of back ref. The new back ref provides information about pointer's key, level and in which tree the pointer lives. This information allow us to find the pointer by searching the tree. The shortcoming of the new back ref is that it only works for pointers in tree blocks referenced by their owner trees. This is mostly a problem for snapshots, where resolving one of these fuzzy back references would be O(number_of_snapshots) and quite slow. The solution used here is to use the fuzzy back references in the common case where a given tree block is only referenced by one root, and use the full back references when multiple roots have a reference on a given block. This commit adds per subvolume red-black tree to keep trace of cached inodes. The red-black tree helps the balancing code to find cached inodes whose inode numbers within a given range. This commit improves the balancing code by introducing several data structures to keep the state of balancing. The most important one is the back ref cache. It caches how the upper level tree blocks are referenced. This greatly reduce the overhead of checking back ref. The improved balancing code scales significantly better with a large number of snapshots. This is a very large commit and was written in a number of pieces. But, they depend heavily on the disk format change and were squashed together to make sure git bisect didn't end up in a bad state wrt space balancing or the format change. Signed-off-by: Yan Zheng <zheng.yan@oracle.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-06-10 22:45:14 +08:00
Btrfs: kill trans_mutex We use trans_mutex for lots of things, here's a basic list 1) To serialize trans_handles joining the currently running transaction 2) To make sure that no new trans handles are started while we are committing 3) To protect the dead_roots list and the transaction lists Really the serializing trans_handles joining is not too hard, and can really get bogged down in acquiring a reference to the transaction. So replace the trans_mutex with a trans_lock spinlock and use it to do the following 1) Protect fs_info->running_transaction. All trans handles have to do is check this, and then take a reference of the transaction and keep on going. 2) Protect the fs_info->trans_list. This doesn't get used too much, basically it just holds the current transactions, which will usually just be the currently committing transaction and the currently running transaction at most. 3) Protect the dead roots list. This is only ever processed by splicing the list so this is relatively simple. 4) Protect the fs_info->reloc_ctl stuff. This is very lightweight and was using the trans_mutex before, so this is a pretty straightforward change. 5) Protect fs_info->no_trans_join. Because we don't hold the trans_lock over the entirety of the commit we need to have a way to block new people from creating a new transaction while we're doing our work. So we set no_trans_join and in join_transaction we test to see if that is set, and if it is we do a wait_on_commit. 6) Make the transaction use count atomic so we don't need to take locks to modify it when we're dropping references. 7) Add a commit_lock to the transaction to make sure multiple people trying to commit the same transaction don't race and commit at the same time. 8) Make open_ioctl_trans an atomic so we don't have to take any locks for ioctl trans. I have tested this with xfstests, but obviously it is a pretty hairy change so lots of testing is greatly appreciated. Thanks, Signed-off-by: Josef Bacik <josef@redhat.com>
2011-04-12 05:25:13 +08:00
spin_lock(&fs_info->trans_lock);
if (list_empty(&fs_info->dead_roots)) {
spin_unlock(&fs_info->trans_lock);
return 0;
}
root = list_first_entry(&fs_info->dead_roots,
struct btrfs_root, root_list);
list_del_init(&root->root_list);
Btrfs: kill trans_mutex We use trans_mutex for lots of things, here's a basic list 1) To serialize trans_handles joining the currently running transaction 2) To make sure that no new trans handles are started while we are committing 3) To protect the dead_roots list and the transaction lists Really the serializing trans_handles joining is not too hard, and can really get bogged down in acquiring a reference to the transaction. So replace the trans_mutex with a trans_lock spinlock and use it to do the following 1) Protect fs_info->running_transaction. All trans handles have to do is check this, and then take a reference of the transaction and keep on going. 2) Protect the fs_info->trans_list. This doesn't get used too much, basically it just holds the current transactions, which will usually just be the currently committing transaction and the currently running transaction at most. 3) Protect the dead roots list. This is only ever processed by splicing the list so this is relatively simple. 4) Protect the fs_info->reloc_ctl stuff. This is very lightweight and was using the trans_mutex before, so this is a pretty straightforward change. 5) Protect fs_info->no_trans_join. Because we don't hold the trans_lock over the entirety of the commit we need to have a way to block new people from creating a new transaction while we're doing our work. So we set no_trans_join and in join_transaction we test to see if that is set, and if it is we do a wait_on_commit. 6) Make the transaction use count atomic so we don't need to take locks to modify it when we're dropping references. 7) Add a commit_lock to the transaction to make sure multiple people trying to commit the same transaction don't race and commit at the same time. 8) Make open_ioctl_trans an atomic so we don't have to take any locks for ioctl trans. I have tested this with xfstests, but obviously it is a pretty hairy change so lots of testing is greatly appreciated. Thanks, Signed-off-by: Josef Bacik <josef@redhat.com>
2011-04-12 05:25:13 +08:00
spin_unlock(&fs_info->trans_lock);
btrfs_debug(fs_info, "cleaner removing %llu", root->root_key.objectid);
btrfs_kill_all_delayed_nodes(root);
btrfs: implement delayed inode items operation Changelog V5 -> V6: - Fix oom when the memory load is high, by storing the delayed nodes into the root's radix tree, and letting btrfs inodes go. Changelog V4 -> V5: - Fix the race on adding the delayed node to the inode, which is spotted by Chris Mason. - Merge Chris Mason's incremental patch into this patch. - Fix deadlock between readdir() and memory fault, which is reported by Itaru Kitayama. Changelog V3 -> V4: - Fix nested lock, which is reported by Itaru Kitayama, by updating space cache inode in time. Changelog V2 -> V3: - Fix the race between the delayed worker and the task which does delayed items balance, which is reported by Tsutomu Itoh. - Modify the patch address David Sterba's comment. - Fix the bug of the cpu recursion spinlock, reported by Chris Mason Changelog V1 -> V2: - break up the global rb-tree, use a list to manage the delayed nodes, which is created for every directory and file, and used to manage the delayed directory name index items and the delayed inode item. - introduce a worker to deal with the delayed nodes. Compare with Ext3/4, the performance of file creation and deletion on btrfs is very poor. the reason is that btrfs must do a lot of b+ tree insertions, such as inode item, directory name item, directory name index and so on. If we can do some delayed b+ tree insertion or deletion, we can improve the performance, so we made this patch which implemented delayed directory name index insertion/deletion and delayed inode update. Implementation: - introduce a delayed root object into the filesystem, that use two lists to manage the delayed nodes which are created for every file/directory. One is used to manage all the delayed nodes that have delayed items. And the other is used to manage the delayed nodes which is waiting to be dealt with by the work thread. - Every delayed node has two rb-tree, one is used to manage the directory name index which is going to be inserted into b+ tree, and the other is used to manage the directory name index which is going to be deleted from b+ tree. - introduce a worker to deal with the delayed operation. This worker is used to deal with the works of the delayed directory name index items insertion and deletion and the delayed inode update. When the delayed items is beyond the lower limit, we create works for some delayed nodes and insert them into the work queue of the worker, and then go back. When the delayed items is beyond the upper bound, we create works for all the delayed nodes that haven't been dealt with, and insert them into the work queue of the worker, and then wait for that the untreated items is below some threshold value. - When we want to insert a directory name index into b+ tree, we just add the information into the delayed inserting rb-tree. And then we check the number of the delayed items and do delayed items balance. (The balance policy is above.) - When we want to delete a directory name index from the b+ tree, we search it in the inserting rb-tree at first. If we look it up, just drop it. If not, add the key of it into the delayed deleting rb-tree. Similar to the delayed inserting rb-tree, we also check the number of the delayed items and do delayed items balance. (The same to inserting manipulation) - When we want to update the metadata of some inode, we cached the data of the inode into the delayed node. the worker will flush it into the b+ tree after dealing with the delayed insertion and deletion. - We will move the delayed node to the tail of the list after we access the delayed node, By this way, we can cache more delayed items and merge more inode updates. - If we want to commit transaction, we will deal with all the delayed node. - the delayed node will be freed when we free the btrfs inode. - Before we log the inode items, we commit all the directory name index items and the delayed inode update. I did a quick test by the benchmark tool[1] and found we can improve the performance of file creation by ~15%, and file deletion by ~20%. Before applying this patch: Create files: Total files: 50000 Total time: 1.096108 Average time: 0.000022 Delete files: Total files: 50000 Total time: 1.510403 Average time: 0.000030 After applying this patch: Create files: Total files: 50000 Total time: 0.932899 Average time: 0.000019 Delete files: Total files: 50000 Total time: 1.215732 Average time: 0.000024 [1] http://marc.info/?l=linux-btrfs&m=128212635122920&q=p3 Many thanks for Kitayama-san's help! Signed-off-by: Miao Xie <miaox@cn.fujitsu.com> Reviewed-by: David Sterba <dave@jikos.cz> Tested-by: Tsutomu Itoh <t-itoh@jp.fujitsu.com> Tested-by: Itaru Kitayama <kitayama@cl.bb4u.ne.jp> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2011-04-22 18:12:22 +08:00
if (btrfs_header_backref_rev(root->node) <
BTRFS_MIXED_BACKREF_REV)
ret = btrfs_drop_snapshot(root, 0, 0);
else
ret = btrfs_drop_snapshot(root, 1, 0);
btrfs_put_root(root);
return (ret < 0) ? 0 : 1;
}
void btrfs_apply_pending_changes(struct btrfs_fs_info *fs_info)
{
unsigned long prev;
unsigned long bit;
prev = xchg(&fs_info->pending_changes, 0);
if (!prev)
return;
bit = 1 << BTRFS_PENDING_COMMIT;
if (prev & bit)
btrfs_debug(fs_info, "pending commit done");
prev &= ~bit;
if (prev)
btrfs_warn(fs_info,
"unknown pending changes left 0x%lx, ignoring", prev);
}