ARCv2: Support for ARCv2 ISA and HS38x cores
The notable features are:
- SMP configurations of upto 4 cores with coherency
- Optional L2 Cache and IO-Coherency
- Revised Interrupt Architecture (multiple priorites, reg banks,
auto stack switch, auto regfile save/restore)
- MMUv4 (PIPT dcache, Huge Pages)
- Instructions for
* 64bit load/store: LDD, STD
* Hardware assisted divide/remainder: DIV, REM
* Function prologue/epilogue: ENTER_S, LEAVE_S
* IRQ enable/disable: CLRI, SETI
* pop count: FFS, FLS
* SETcc, BMSKN, XBFU...
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2013-05-13 21:00:41 +08:00
|
|
|
/*
|
|
|
|
* ARCv2 ISA based core Low Level Intr/Traps/Exceptions(non-TLB) Handling
|
|
|
|
*
|
|
|
|
* Copyright (C) 2013 Synopsys, Inc. (www.synopsys.com)
|
|
|
|
*
|
|
|
|
* This program is free software; you can redistribute it and/or modify
|
|
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
|
|
* published by the Free Software Foundation.
|
|
|
|
*/
|
|
|
|
|
|
|
|
#include <linux/linkage.h> /* ARC_{EXTRY,EXIT} */
|
|
|
|
#include <asm/entry.h> /* SAVE_ALL_{INT1,INT2,TRAP...} */
|
|
|
|
#include <asm/errno.h>
|
|
|
|
#include <asm/arcregs.h>
|
|
|
|
#include <asm/irqflags.h>
|
|
|
|
|
2017-01-31 19:45:22 +08:00
|
|
|
; A maximum number of supported interrupts in the core interrupt controller.
|
|
|
|
; This number is not equal to the maximum interrupt number (256) because
|
|
|
|
; first 16 lines are reserved for exceptions and are not configurable.
|
|
|
|
#define NR_CPU_IRQS 240
|
|
|
|
|
ARCv2: Support for ARCv2 ISA and HS38x cores
The notable features are:
- SMP configurations of upto 4 cores with coherency
- Optional L2 Cache and IO-Coherency
- Revised Interrupt Architecture (multiple priorites, reg banks,
auto stack switch, auto regfile save/restore)
- MMUv4 (PIPT dcache, Huge Pages)
- Instructions for
* 64bit load/store: LDD, STD
* Hardware assisted divide/remainder: DIV, REM
* Function prologue/epilogue: ENTER_S, LEAVE_S
* IRQ enable/disable: CLRI, SETI
* pop count: FFS, FLS
* SETcc, BMSKN, XBFU...
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2013-05-13 21:00:41 +08:00
|
|
|
.cpu HS
|
|
|
|
|
|
|
|
#define VECTOR .word
|
|
|
|
|
|
|
|
;############################ Vector Table #################################
|
|
|
|
|
|
|
|
.section .vector,"a",@progbits
|
|
|
|
.align 4
|
|
|
|
|
|
|
|
# Initial 16 slots are Exception Vectors
|
2015-10-09 13:56:12 +08:00
|
|
|
VECTOR res_service ; Reset Vector
|
ARCv2: Support for ARCv2 ISA and HS38x cores
The notable features are:
- SMP configurations of upto 4 cores with coherency
- Optional L2 Cache and IO-Coherency
- Revised Interrupt Architecture (multiple priorites, reg banks,
auto stack switch, auto regfile save/restore)
- MMUv4 (PIPT dcache, Huge Pages)
- Instructions for
* 64bit load/store: LDD, STD
* Hardware assisted divide/remainder: DIV, REM
* Function prologue/epilogue: ENTER_S, LEAVE_S
* IRQ enable/disable: CLRI, SETI
* pop count: FFS, FLS
* SETcc, BMSKN, XBFU...
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2013-05-13 21:00:41 +08:00
|
|
|
VECTOR mem_service ; Mem exception
|
|
|
|
VECTOR instr_service ; Instrn Error
|
|
|
|
VECTOR EV_MachineCheck ; Fatal Machine check
|
|
|
|
VECTOR EV_TLBMissI ; Intruction TLB miss
|
|
|
|
VECTOR EV_TLBMissD ; Data TLB miss
|
|
|
|
VECTOR EV_TLBProtV ; Protection Violation
|
|
|
|
VECTOR EV_PrivilegeV ; Privilege Violation
|
|
|
|
VECTOR EV_SWI ; Software Breakpoint
|
|
|
|
VECTOR EV_Trap ; Trap exception
|
|
|
|
VECTOR EV_Extension ; Extn Instruction Exception
|
|
|
|
VECTOR EV_DivZero ; Divide by Zero
|
|
|
|
VECTOR EV_DCError ; Data Cache Error
|
|
|
|
VECTOR EV_Misaligned ; Misaligned Data Access
|
|
|
|
VECTOR reserved ; Reserved slots
|
|
|
|
VECTOR reserved ; Reserved slots
|
|
|
|
|
|
|
|
# Begin Interrupt Vectors
|
|
|
|
VECTOR handle_interrupt ; (16) Timer0
|
|
|
|
VECTOR handle_interrupt ; unused (Timer1)
|
|
|
|
VECTOR handle_interrupt ; unused (WDT)
|
2016-02-23 14:25:16 +08:00
|
|
|
VECTOR handle_interrupt ; (19) Inter core Interrupt (IPI)
|
|
|
|
VECTOR handle_interrupt ; (20) perf Interrupt
|
|
|
|
VECTOR handle_interrupt ; (21) Software Triggered Intr (Self IPI)
|
|
|
|
VECTOR handle_interrupt ; unused
|
|
|
|
VECTOR handle_interrupt ; (23) unused
|
|
|
|
# End of fixed IRQs
|
ARCv2: Support for ARCv2 ISA and HS38x cores
The notable features are:
- SMP configurations of upto 4 cores with coherency
- Optional L2 Cache and IO-Coherency
- Revised Interrupt Architecture (multiple priorites, reg banks,
auto stack switch, auto regfile save/restore)
- MMUv4 (PIPT dcache, Huge Pages)
- Instructions for
* 64bit load/store: LDD, STD
* Hardware assisted divide/remainder: DIV, REM
* Function prologue/epilogue: ENTER_S, LEAVE_S
* IRQ enable/disable: CLRI, SETI
* pop count: FFS, FLS
* SETcc, BMSKN, XBFU...
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2013-05-13 21:00:41 +08:00
|
|
|
|
2017-01-31 19:45:22 +08:00
|
|
|
.rept NR_CPU_IRQS - 8
|
ARCv2: Support for ARCv2 ISA and HS38x cores
The notable features are:
- SMP configurations of upto 4 cores with coherency
- Optional L2 Cache and IO-Coherency
- Revised Interrupt Architecture (multiple priorites, reg banks,
auto stack switch, auto regfile save/restore)
- MMUv4 (PIPT dcache, Huge Pages)
- Instructions for
* 64bit load/store: LDD, STD
* Hardware assisted divide/remainder: DIV, REM
* Function prologue/epilogue: ENTER_S, LEAVE_S
* IRQ enable/disable: CLRI, SETI
* pop count: FFS, FLS
* SETcc, BMSKN, XBFU...
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2013-05-13 21:00:41 +08:00
|
|
|
VECTOR handle_interrupt
|
|
|
|
.endr
|
|
|
|
|
|
|
|
.section .text, "ax",@progbits
|
|
|
|
|
2015-08-27 18:55:07 +08:00
|
|
|
reserved:
|
|
|
|
flag 1 ; Unexpected event, halt
|
ARCv2: Support for ARCv2 ISA and HS38x cores
The notable features are:
- SMP configurations of upto 4 cores with coherency
- Optional L2 Cache and IO-Coherency
- Revised Interrupt Architecture (multiple priorites, reg banks,
auto stack switch, auto regfile save/restore)
- MMUv4 (PIPT dcache, Huge Pages)
- Instructions for
* 64bit load/store: LDD, STD
* Hardware assisted divide/remainder: DIV, REM
* Function prologue/epilogue: ENTER_S, LEAVE_S
* IRQ enable/disable: CLRI, SETI
* pop count: FFS, FLS
* SETcc, BMSKN, XBFU...
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2013-05-13 21:00:41 +08:00
|
|
|
|
|
|
|
;##################### Interrupt Handling ##############################
|
|
|
|
|
|
|
|
ENTRY(handle_interrupt)
|
|
|
|
|
|
|
|
INTERRUPT_PROLOGUE irq
|
|
|
|
|
2016-09-24 05:09:30 +08:00
|
|
|
# irq control APIs local_irq_save/restore/disable/enable fiddle with
|
|
|
|
# global interrupt enable bits in STATUS32 (.IE for 1 prio, .E[] for 2 prio)
|
|
|
|
# However a taken interrupt doesn't clear these bits. Thus irqs_disabled()
|
|
|
|
# query in hard ISR path would return false (since .IE is set) which would
|
|
|
|
# trips genirq interrupt handling asserts.
|
|
|
|
#
|
|
|
|
# So do a "soft" disable of interrutps here.
|
|
|
|
#
|
|
|
|
# Note this disable is only for consistent book-keeping as further interrupts
|
|
|
|
# will be disabled anyways even w/o this. Hardware tracks active interrupts
|
|
|
|
# seperately in AUX_IRQ_ACTIVE.active and will not take new interrupts
|
|
|
|
# unless this one returns (or higher prio becomes pending in 2-prio scheme)
|
|
|
|
|
|
|
|
IRQ_DISABLE
|
|
|
|
|
|
|
|
; icause is banked: one per priority level
|
|
|
|
; so a higher prio interrupt taken here won't clobber prev prio icause
|
2016-03-23 17:26:52 +08:00
|
|
|
lr r0, [ICAUSE]
|
ARCv2: Support for ARCv2 ISA and HS38x cores
The notable features are:
- SMP configurations of upto 4 cores with coherency
- Optional L2 Cache and IO-Coherency
- Revised Interrupt Architecture (multiple priorites, reg banks,
auto stack switch, auto regfile save/restore)
- MMUv4 (PIPT dcache, Huge Pages)
- Instructions for
* 64bit load/store: LDD, STD
* Hardware assisted divide/remainder: DIV, REM
* Function prologue/epilogue: ENTER_S, LEAVE_S
* IRQ enable/disable: CLRI, SETI
* pop count: FFS, FLS
* SETcc, BMSKN, XBFU...
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2013-05-13 21:00:41 +08:00
|
|
|
mov blink, ret_from_exception
|
|
|
|
|
|
|
|
b.d arch_do_IRQ
|
|
|
|
mov r1, sp
|
|
|
|
|
|
|
|
END(handle_interrupt)
|
|
|
|
|
|
|
|
;################### Non TLB Exception Handling #############################
|
|
|
|
|
|
|
|
ENTRY(EV_SWI)
|
2017-03-21 09:46:15 +08:00
|
|
|
; TODO: implement this
|
|
|
|
EXCEPTION_PROLOGUE
|
|
|
|
b ret_from_exception
|
ARCv2: Support for ARCv2 ISA and HS38x cores
The notable features are:
- SMP configurations of upto 4 cores with coherency
- Optional L2 Cache and IO-Coherency
- Revised Interrupt Architecture (multiple priorites, reg banks,
auto stack switch, auto regfile save/restore)
- MMUv4 (PIPT dcache, Huge Pages)
- Instructions for
* 64bit load/store: LDD, STD
* Hardware assisted divide/remainder: DIV, REM
* Function prologue/epilogue: ENTER_S, LEAVE_S
* IRQ enable/disable: CLRI, SETI
* pop count: FFS, FLS
* SETcc, BMSKN, XBFU...
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2013-05-13 21:00:41 +08:00
|
|
|
END(EV_SWI)
|
|
|
|
|
|
|
|
ENTRY(EV_DivZero)
|
2017-03-21 09:46:15 +08:00
|
|
|
; TODO: implement this
|
|
|
|
EXCEPTION_PROLOGUE
|
|
|
|
b ret_from_exception
|
ARCv2: Support for ARCv2 ISA and HS38x cores
The notable features are:
- SMP configurations of upto 4 cores with coherency
- Optional L2 Cache and IO-Coherency
- Revised Interrupt Architecture (multiple priorites, reg banks,
auto stack switch, auto regfile save/restore)
- MMUv4 (PIPT dcache, Huge Pages)
- Instructions for
* 64bit load/store: LDD, STD
* Hardware assisted divide/remainder: DIV, REM
* Function prologue/epilogue: ENTER_S, LEAVE_S
* IRQ enable/disable: CLRI, SETI
* pop count: FFS, FLS
* SETcc, BMSKN, XBFU...
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2013-05-13 21:00:41 +08:00
|
|
|
END(EV_DivZero)
|
|
|
|
|
|
|
|
ENTRY(EV_DCError)
|
2017-03-21 09:46:15 +08:00
|
|
|
; TODO: implement this
|
|
|
|
EXCEPTION_PROLOGUE
|
|
|
|
b ret_from_exception
|
ARCv2: Support for ARCv2 ISA and HS38x cores
The notable features are:
- SMP configurations of upto 4 cores with coherency
- Optional L2 Cache and IO-Coherency
- Revised Interrupt Architecture (multiple priorites, reg banks,
auto stack switch, auto regfile save/restore)
- MMUv4 (PIPT dcache, Huge Pages)
- Instructions for
* 64bit load/store: LDD, STD
* Hardware assisted divide/remainder: DIV, REM
* Function prologue/epilogue: ENTER_S, LEAVE_S
* IRQ enable/disable: CLRI, SETI
* pop count: FFS, FLS
* SETcc, BMSKN, XBFU...
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2013-05-13 21:00:41 +08:00
|
|
|
END(EV_DCError)
|
|
|
|
|
2015-10-31 03:52:51 +08:00
|
|
|
; ---------------------------------------------
|
|
|
|
; Memory Error Exception Handler
|
|
|
|
; - Unlike ARCompact, handles Bus errors for both User/Kernel mode,
|
|
|
|
; Instruction fetch or Data access, under a single Exception Vector
|
|
|
|
; ---------------------------------------------
|
|
|
|
|
|
|
|
ENTRY(mem_service)
|
|
|
|
|
|
|
|
EXCEPTION_PROLOGUE
|
|
|
|
|
|
|
|
lr r0, [efa]
|
|
|
|
mov r1, sp
|
|
|
|
|
|
|
|
FAKE_RET_FROM_EXCPN
|
|
|
|
|
|
|
|
bl do_memory_error
|
|
|
|
b ret_from_exception
|
|
|
|
END(mem_service)
|
|
|
|
|
ARCv2: Support for ARCv2 ISA and HS38x cores
The notable features are:
- SMP configurations of upto 4 cores with coherency
- Optional L2 Cache and IO-Coherency
- Revised Interrupt Architecture (multiple priorites, reg banks,
auto stack switch, auto regfile save/restore)
- MMUv4 (PIPT dcache, Huge Pages)
- Instructions for
* 64bit load/store: LDD, STD
* Hardware assisted divide/remainder: DIV, REM
* Function prologue/epilogue: ENTER_S, LEAVE_S
* IRQ enable/disable: CLRI, SETI
* pop count: FFS, FLS
* SETcc, BMSKN, XBFU...
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2013-05-13 21:00:41 +08:00
|
|
|
ENTRY(EV_Misaligned)
|
|
|
|
|
|
|
|
EXCEPTION_PROLOGUE
|
|
|
|
|
|
|
|
lr r0, [efa] ; Faulting Data address
|
|
|
|
mov r1, sp
|
|
|
|
|
|
|
|
FAKE_RET_FROM_EXCPN
|
|
|
|
|
|
|
|
SAVE_CALLEE_SAVED_USER
|
|
|
|
mov r2, sp ; callee_regs
|
|
|
|
|
|
|
|
bl do_misaligned_access
|
|
|
|
|
|
|
|
; TBD: optimize - do this only if a callee reg was involved
|
|
|
|
; either a dst of emulated LD/ST or src with address-writeback
|
|
|
|
RESTORE_CALLEE_SAVED_USER
|
|
|
|
|
|
|
|
b ret_from_exception
|
|
|
|
END(EV_Misaligned)
|
|
|
|
|
|
|
|
; ---------------------------------------------
|
|
|
|
; Protection Violation Exception Handler
|
|
|
|
; ---------------------------------------------
|
|
|
|
|
|
|
|
ENTRY(EV_TLBProtV)
|
|
|
|
|
|
|
|
EXCEPTION_PROLOGUE
|
|
|
|
|
|
|
|
lr r0, [efa] ; Faulting Data address
|
|
|
|
mov r1, sp ; pt_regs
|
|
|
|
|
|
|
|
FAKE_RET_FROM_EXCPN
|
|
|
|
|
|
|
|
mov blink, ret_from_exception
|
|
|
|
b do_page_fault
|
|
|
|
|
|
|
|
END(EV_TLBProtV)
|
|
|
|
|
|
|
|
; From Linux standpoint Slow Path I/D TLB Miss is same a ProtV as they
|
|
|
|
; need to call do_page_fault().
|
|
|
|
; ECR in pt_regs provides whether access was R/W/X
|
|
|
|
|
|
|
|
.global call_do_page_fault
|
|
|
|
.set call_do_page_fault, EV_TLBProtV
|
|
|
|
|
|
|
|
;############# Common Handlers for ARCompact and ARCv2 ##############
|
|
|
|
|
|
|
|
#include "entry.S"
|
|
|
|
|
|
|
|
;############# Return from Intr/Excp/Trap (ARCv2 ISA Specifics) ##############
|
|
|
|
;
|
|
|
|
; Restore the saved sys context (common exit-path for EXCPN/IRQ/Trap)
|
|
|
|
; IRQ shd definitely not happen between now and rtie
|
|
|
|
; All 2 entry points to here already disable interrupts
|
|
|
|
|
|
|
|
.Lrestore_regs:
|
2016-09-24 05:09:30 +08:00
|
|
|
restore_regs:
|
ARCv2: Support for ARCv2 ISA and HS38x cores
The notable features are:
- SMP configurations of upto 4 cores with coherency
- Optional L2 Cache and IO-Coherency
- Revised Interrupt Architecture (multiple priorites, reg banks,
auto stack switch, auto regfile save/restore)
- MMUv4 (PIPT dcache, Huge Pages)
- Instructions for
* 64bit load/store: LDD, STD
* Hardware assisted divide/remainder: DIV, REM
* Function prologue/epilogue: ENTER_S, LEAVE_S
* IRQ enable/disable: CLRI, SETI
* pop count: FFS, FLS
* SETcc, BMSKN, XBFU...
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2013-05-13 21:00:41 +08:00
|
|
|
|
2016-03-23 17:26:52 +08:00
|
|
|
# Interrpts are actually disabled from this point on, but will get
|
|
|
|
# reenabled after we return from interrupt/exception.
|
|
|
|
# But irq tracer needs to be told now...
|
|
|
|
TRACE_ASM_IRQ_ENABLE
|
|
|
|
|
ARCv2: Support for ARCv2 ISA and HS38x cores
The notable features are:
- SMP configurations of upto 4 cores with coherency
- Optional L2 Cache and IO-Coherency
- Revised Interrupt Architecture (multiple priorites, reg banks,
auto stack switch, auto regfile save/restore)
- MMUv4 (PIPT dcache, Huge Pages)
- Instructions for
* 64bit load/store: LDD, STD
* Hardware assisted divide/remainder: DIV, REM
* Function prologue/epilogue: ENTER_S, LEAVE_S
* IRQ enable/disable: CLRI, SETI
* pop count: FFS, FLS
* SETcc, BMSKN, XBFU...
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2013-05-13 21:00:41 +08:00
|
|
|
ld r0, [sp, PT_status32] ; U/K mode at time of entry
|
|
|
|
lr r10, [AUX_IRQ_ACT]
|
|
|
|
|
|
|
|
bmsk r11, r10, 15 ; AUX_IRQ_ACT.ACTIVE
|
|
|
|
breq r11, 0, .Lexcept_ret ; No intr active, ret from Exception
|
|
|
|
|
|
|
|
;####### Return from Intr #######
|
|
|
|
|
|
|
|
debug_marker_l1:
|
2014-09-22 19:21:47 +08:00
|
|
|
bbit1.nt r0, STATUS_DE_BIT, .Lintr_ret_to_delay_slot
|
|
|
|
|
|
|
|
.Lisr_ret_fast_path:
|
ARCv2: Support for ARCv2 ISA and HS38x cores
The notable features are:
- SMP configurations of upto 4 cores with coherency
- Optional L2 Cache and IO-Coherency
- Revised Interrupt Architecture (multiple priorites, reg banks,
auto stack switch, auto regfile save/restore)
- MMUv4 (PIPT dcache, Huge Pages)
- Instructions for
* 64bit load/store: LDD, STD
* Hardware assisted divide/remainder: DIV, REM
* Function prologue/epilogue: ENTER_S, LEAVE_S
* IRQ enable/disable: CLRI, SETI
* pop count: FFS, FLS
* SETcc, BMSKN, XBFU...
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2013-05-13 21:00:41 +08:00
|
|
|
; Handle special case #1: (Entry via Exception, Return via IRQ)
|
|
|
|
;
|
|
|
|
; Exception in U mode, preempted in kernel, Intr taken (K mode), orig
|
|
|
|
; task now returning to U mode (riding the Intr)
|
|
|
|
; AUX_IRQ_ACTIVE won't have U bit set (since intr in K mode), hence SP
|
|
|
|
; won't be switched to correct U mode value (from AUX_SP)
|
|
|
|
; So force AUX_IRQ_ACT.U for such a case
|
|
|
|
|
|
|
|
btst r0, STATUS_U_BIT ; Z flag set if K (Z clear for U)
|
|
|
|
bset.nz r11, r11, AUX_IRQ_ACT_BIT_U ; NZ means U
|
|
|
|
sr r11, [AUX_IRQ_ACT]
|
|
|
|
|
|
|
|
INTERRUPT_EPILOGUE irq
|
|
|
|
rtie
|
|
|
|
|
|
|
|
;####### Return from Exception / pure kernel mode #######
|
|
|
|
|
|
|
|
.Lexcept_ret: ; Expects r0 has PT_status32
|
|
|
|
|
|
|
|
debug_marker_syscall:
|
|
|
|
EXCEPTION_EPILOGUE
|
|
|
|
rtie
|
|
|
|
|
2014-09-22 19:21:47 +08:00
|
|
|
;####### Return from Intr to insn in delay slot #######
|
|
|
|
|
|
|
|
; Handle special case #2: (Entry via Exception in Delay Slot, Return via IRQ)
|
|
|
|
;
|
|
|
|
; Intr returning to a Delay Slot (DS) insn
|
|
|
|
; (since IRQ NOT allowed in DS in ARCv2, this can only happen if orig
|
|
|
|
; entry was via Exception in DS which got preempted in kernel).
|
|
|
|
;
|
2016-01-08 14:59:10 +08:00
|
|
|
; IRQ RTIE won't reliably restore DE bit and/or BTA, needs workaround
|
|
|
|
;
|
|
|
|
; Solution is return from Intr w/o any delay slot quirks into a kernel trampoline
|
|
|
|
; and from pure kernel mode return to delay slot which handles DS bit/BTA correctly
|
|
|
|
|
2014-09-22 19:21:47 +08:00
|
|
|
.Lintr_ret_to_delay_slot:
|
|
|
|
debug_marker_ds:
|
|
|
|
|
|
|
|
ld r2, [@intr_to_DE_cnt]
|
|
|
|
add r2, r2, 1
|
|
|
|
st r2, [@intr_to_DE_cnt]
|
|
|
|
|
|
|
|
ld r2, [sp, PT_ret]
|
|
|
|
ld r3, [sp, PT_status32]
|
|
|
|
|
2016-01-08 14:59:10 +08:00
|
|
|
; STAT32 for Int return created from scratch
|
|
|
|
; (No delay dlot, disable Further intr in trampoline)
|
|
|
|
|
2014-09-22 19:21:47 +08:00
|
|
|
bic r0, r3, STATUS_U_MASK|STATUS_DE_MASK|STATUS_IE_MASK|STATUS_L_MASK
|
|
|
|
st r0, [sp, PT_status32]
|
|
|
|
|
|
|
|
mov r1, .Lintr_ret_to_delay_slot_2
|
|
|
|
st r1, [sp, PT_ret]
|
|
|
|
|
2016-01-08 14:59:10 +08:00
|
|
|
; Orig exception PC/STAT32 safekept @orig_r0 and @event stack slots
|
2014-09-22 19:21:47 +08:00
|
|
|
st r2, [sp, 0]
|
|
|
|
st r3, [sp, 4]
|
|
|
|
|
|
|
|
b .Lisr_ret_fast_path
|
|
|
|
|
|
|
|
.Lintr_ret_to_delay_slot_2:
|
2016-01-08 14:59:10 +08:00
|
|
|
; Trampoline to restore orig exception PC/STAT32/BTA/AUX_USER_SP
|
2014-09-22 19:21:47 +08:00
|
|
|
sub sp, sp, SZ_PT_REGS
|
|
|
|
st r9, [sp, -4]
|
|
|
|
|
|
|
|
ld r9, [sp, 0]
|
|
|
|
sr r9, [eret]
|
|
|
|
|
|
|
|
ld r9, [sp, 4]
|
|
|
|
sr r9, [erstatus]
|
|
|
|
|
2016-01-08 14:59:10 +08:00
|
|
|
; restore AUX_USER_SP if returning to U mode
|
|
|
|
bbit0 r9, STATUS_U_BIT, 1f
|
|
|
|
ld r9, [sp, PT_sp]
|
|
|
|
sr r9, [AUX_USER_SP]
|
|
|
|
|
|
|
|
1:
|
2014-09-22 19:21:47 +08:00
|
|
|
ld r9, [sp, 8]
|
|
|
|
sr r9, [erbta]
|
|
|
|
|
|
|
|
ld r9, [sp, -4]
|
|
|
|
add sp, sp, SZ_PT_REGS
|
2016-01-08 14:59:10 +08:00
|
|
|
|
|
|
|
; return from pure kernel mode to delay slot
|
2014-09-22 19:21:47 +08:00
|
|
|
rtie
|
|
|
|
|
ARCv2: Support for ARCv2 ISA and HS38x cores
The notable features are:
- SMP configurations of upto 4 cores with coherency
- Optional L2 Cache and IO-Coherency
- Revised Interrupt Architecture (multiple priorites, reg banks,
auto stack switch, auto regfile save/restore)
- MMUv4 (PIPT dcache, Huge Pages)
- Instructions for
* 64bit load/store: LDD, STD
* Hardware assisted divide/remainder: DIV, REM
* Function prologue/epilogue: ENTER_S, LEAVE_S
* IRQ enable/disable: CLRI, SETI
* pop count: FFS, FLS
* SETcc, BMSKN, XBFU...
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2013-05-13 21:00:41 +08:00
|
|
|
END(ret_from_exception)
|