OpenCloudOS-Kernel/drivers/thermal/thermal_sysfs.c

1025 lines
25 KiB
C
Raw Normal View History

/*
* thermal.c - sysfs interface of thermal devices
*
* Copyright (C) 2016 Eduardo Valentin <edubezval@gmail.com>
*
* Highly based on original thermal_core.c
* Copyright (C) 2008 Intel Corp
* Copyright (C) 2008 Zhang Rui <rui.zhang@intel.com>
* Copyright (C) 2008 Sujith Thomas <sujith.thomas@intel.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; version 2 of the License.
*/
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
#include <linux/sysfs.h>
#include <linux/device.h>
#include <linux/err.h>
#include <linux/slab.h>
#include <linux/string.h>
thermal: Add cooling device's statistics in sysfs This extends the sysfs interface for thermal cooling devices and exposes some pretty useful statistics. These statistics have proven to be quite useful specially while doing benchmarks related to the task scheduler, where we want to make sure that nothing has disrupted the test, specially the cooling device which may have put constraints on the CPUs. The information exposed here tells us to what extent the CPUs were constrained by the thermal framework. The write-only "reset" file is used to reset the statistics. The read-only "time_in_state_ms" file shows the time (in msec) spent by the device in the respective cooling states, and it prints one line per cooling state. The read-only "total_trans" file shows single positive integer value showing the total number of cooling state transitions the device has gone through since the time the cooling device is registered or the time when statistics were reset last. The read-only "trans_table" file shows a two dimensional matrix, where an entry <i,j> (row i, column j) represents the number of transitions from State_i to State_j. This is how the directory structure looks like for a single cooling device: $ ls -R /sys/class/thermal/cooling_device0/ /sys/class/thermal/cooling_device0/: cur_state max_state power stats subsystem type uevent /sys/class/thermal/cooling_device0/power: autosuspend_delay_ms runtime_active_time runtime_suspended_time control runtime_status /sys/class/thermal/cooling_device0/stats: reset time_in_state_ms total_trans trans_table This is tested on ARM 64-bit Hisilicon hikey620 board running Ubuntu and ARM 64-bit Hisilicon hikey960 board running Android. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2018-04-02 18:56:25 +08:00
#include <linux/jiffies.h>
#include "thermal_core.h"
/* sys I/F for thermal zone */
static ssize_t
type_show(struct device *dev, struct device_attribute *attr, char *buf)
{
struct thermal_zone_device *tz = to_thermal_zone(dev);
return sprintf(buf, "%s\n", tz->type);
}
static ssize_t
temp_show(struct device *dev, struct device_attribute *attr, char *buf)
{
struct thermal_zone_device *tz = to_thermal_zone(dev);
int temperature, ret;
ret = thermal_zone_get_temp(tz, &temperature);
if (ret)
return ret;
return sprintf(buf, "%d\n", temperature);
}
static ssize_t
mode_show(struct device *dev, struct device_attribute *attr, char *buf)
{
struct thermal_zone_device *tz = to_thermal_zone(dev);
enum thermal_device_mode mode;
int result;
if (!tz->ops->get_mode)
return -EPERM;
result = tz->ops->get_mode(tz, &mode);
if (result)
return result;
return sprintf(buf, "%s\n", mode == THERMAL_DEVICE_ENABLED ? "enabled"
: "disabled");
}
static ssize_t
mode_store(struct device *dev, struct device_attribute *attr,
const char *buf, size_t count)
{
struct thermal_zone_device *tz = to_thermal_zone(dev);
int result;
if (!tz->ops->set_mode)
return -EPERM;
if (!strncmp(buf, "enabled", sizeof("enabled") - 1))
result = tz->ops->set_mode(tz, THERMAL_DEVICE_ENABLED);
else if (!strncmp(buf, "disabled", sizeof("disabled") - 1))
result = tz->ops->set_mode(tz, THERMAL_DEVICE_DISABLED);
else
result = -EINVAL;
if (result)
return result;
return count;
}
static ssize_t
trip_point_type_show(struct device *dev, struct device_attribute *attr,
char *buf)
{
struct thermal_zone_device *tz = to_thermal_zone(dev);
enum thermal_trip_type type;
int trip, result;
if (!tz->ops->get_trip_type)
return -EPERM;
if (sscanf(attr->attr.name, "trip_point_%d_type", &trip) != 1)
return -EINVAL;
result = tz->ops->get_trip_type(tz, trip, &type);
if (result)
return result;
switch (type) {
case THERMAL_TRIP_CRITICAL:
return sprintf(buf, "critical\n");
case THERMAL_TRIP_HOT:
return sprintf(buf, "hot\n");
case THERMAL_TRIP_PASSIVE:
return sprintf(buf, "passive\n");
case THERMAL_TRIP_ACTIVE:
return sprintf(buf, "active\n");
default:
return sprintf(buf, "unknown\n");
}
}
static ssize_t
trip_point_temp_store(struct device *dev, struct device_attribute *attr,
const char *buf, size_t count)
{
struct thermal_zone_device *tz = to_thermal_zone(dev);
int trip, ret;
int temperature;
if (!tz->ops->set_trip_temp)
return -EPERM;
if (sscanf(attr->attr.name, "trip_point_%d_temp", &trip) != 1)
return -EINVAL;
if (kstrtoint(buf, 10, &temperature))
return -EINVAL;
ret = tz->ops->set_trip_temp(tz, trip, temperature);
if (ret)
return ret;
thermal_zone_device_update(tz, THERMAL_EVENT_UNSPECIFIED);
return count;
}
static ssize_t
trip_point_temp_show(struct device *dev, struct device_attribute *attr,
char *buf)
{
struct thermal_zone_device *tz = to_thermal_zone(dev);
int trip, ret;
int temperature;
if (!tz->ops->get_trip_temp)
return -EPERM;
if (sscanf(attr->attr.name, "trip_point_%d_temp", &trip) != 1)
return -EINVAL;
ret = tz->ops->get_trip_temp(tz, trip, &temperature);
if (ret)
return ret;
return sprintf(buf, "%d\n", temperature);
}
static ssize_t
trip_point_hyst_store(struct device *dev, struct device_attribute *attr,
const char *buf, size_t count)
{
struct thermal_zone_device *tz = to_thermal_zone(dev);
int trip, ret;
int temperature;
if (!tz->ops->set_trip_hyst)
return -EPERM;
if (sscanf(attr->attr.name, "trip_point_%d_hyst", &trip) != 1)
return -EINVAL;
if (kstrtoint(buf, 10, &temperature))
return -EINVAL;
/*
* We are not doing any check on the 'temperature' value
* here. The driver implementing 'set_trip_hyst' has to
* take care of this.
*/
ret = tz->ops->set_trip_hyst(tz, trip, temperature);
if (!ret)
thermal_zone_set_trips(tz);
return ret ? ret : count;
}
static ssize_t
trip_point_hyst_show(struct device *dev, struct device_attribute *attr,
char *buf)
{
struct thermal_zone_device *tz = to_thermal_zone(dev);
int trip, ret;
int temperature;
if (!tz->ops->get_trip_hyst)
return -EPERM;
if (sscanf(attr->attr.name, "trip_point_%d_hyst", &trip) != 1)
return -EINVAL;
ret = tz->ops->get_trip_hyst(tz, trip, &temperature);
return ret ? ret : sprintf(buf, "%d\n", temperature);
}
static ssize_t
passive_store(struct device *dev, struct device_attribute *attr,
const char *buf, size_t count)
{
struct thermal_zone_device *tz = to_thermal_zone(dev);
int state;
if (sscanf(buf, "%d\n", &state) != 1)
return -EINVAL;
/* sanity check: values below 1000 millicelcius don't make sense
* and can cause the system to go into a thermal heart attack
*/
if (state && state < 1000)
return -EINVAL;
if (state && !tz->forced_passive) {
if (!tz->passive_delay)
tz->passive_delay = 1000;
thermal_zone_device_rebind_exception(tz, "Processor",
sizeof("Processor"));
} else if (!state && tz->forced_passive) {
tz->passive_delay = 0;
thermal_zone_device_unbind_exception(tz, "Processor",
sizeof("Processor"));
}
tz->forced_passive = state;
thermal_zone_device_update(tz, THERMAL_EVENT_UNSPECIFIED);
return count;
}
static ssize_t
passive_show(struct device *dev, struct device_attribute *attr,
char *buf)
{
struct thermal_zone_device *tz = to_thermal_zone(dev);
return sprintf(buf, "%d\n", tz->forced_passive);
}
static ssize_t
policy_store(struct device *dev, struct device_attribute *attr,
const char *buf, size_t count)
{
struct thermal_zone_device *tz = to_thermal_zone(dev);
char name[THERMAL_NAME_LENGTH];
int ret;
snprintf(name, sizeof(name), "%s", buf);
ret = thermal_zone_device_set_policy(tz, name);
if (!ret)
ret = count;
return ret;
}
static ssize_t
policy_show(struct device *dev, struct device_attribute *devattr, char *buf)
{
struct thermal_zone_device *tz = to_thermal_zone(dev);
return sprintf(buf, "%s\n", tz->governor->name);
}
static ssize_t
available_policies_show(struct device *dev, struct device_attribute *devattr,
char *buf)
{
return thermal_build_list_of_policies(buf);
}
#if (IS_ENABLED(CONFIG_THERMAL_EMULATION))
static ssize_t
emul_temp_store(struct device *dev, struct device_attribute *attr,
const char *buf, size_t count)
{
struct thermal_zone_device *tz = to_thermal_zone(dev);
int ret = 0;
int temperature;
if (kstrtoint(buf, 10, &temperature))
return -EINVAL;
if (!tz->ops->set_emul_temp) {
mutex_lock(&tz->lock);
tz->emul_temperature = temperature;
mutex_unlock(&tz->lock);
} else {
ret = tz->ops->set_emul_temp(tz, temperature);
}
if (!ret)
thermal_zone_device_update(tz, THERMAL_EVENT_UNSPECIFIED);
return ret ? ret : count;
}
static DEVICE_ATTR_WO(emul_temp);
#endif
static ssize_t
sustainable_power_show(struct device *dev, struct device_attribute *devattr,
char *buf)
{
struct thermal_zone_device *tz = to_thermal_zone(dev);
if (tz->tzp)
return sprintf(buf, "%u\n", tz->tzp->sustainable_power);
else
return -EIO;
}
static ssize_t
sustainable_power_store(struct device *dev, struct device_attribute *devattr,
const char *buf, size_t count)
{
struct thermal_zone_device *tz = to_thermal_zone(dev);
u32 sustainable_power;
if (!tz->tzp)
return -EIO;
if (kstrtou32(buf, 10, &sustainable_power))
return -EINVAL;
tz->tzp->sustainable_power = sustainable_power;
return count;
}
#define create_s32_tzp_attr(name) \
static ssize_t \
name##_show(struct device *dev, struct device_attribute *devattr, \
char *buf) \
{ \
struct thermal_zone_device *tz = to_thermal_zone(dev); \
\
if (tz->tzp) \
return sprintf(buf, "%d\n", tz->tzp->name); \
else \
return -EIO; \
} \
\
static ssize_t \
name##_store(struct device *dev, struct device_attribute *devattr, \
const char *buf, size_t count) \
{ \
struct thermal_zone_device *tz = to_thermal_zone(dev); \
s32 value; \
\
if (!tz->tzp) \
return -EIO; \
\
if (kstrtos32(buf, 10, &value)) \
return -EINVAL; \
\
tz->tzp->name = value; \
\
return count; \
} \
static DEVICE_ATTR(name, S_IWUSR | S_IRUGO, name##_show, name##_store)
create_s32_tzp_attr(k_po);
create_s32_tzp_attr(k_pu);
create_s32_tzp_attr(k_i);
create_s32_tzp_attr(k_d);
create_s32_tzp_attr(integral_cutoff);
create_s32_tzp_attr(slope);
create_s32_tzp_attr(offset);
#undef create_s32_tzp_attr
/*
* These are thermal zone device attributes that will always be present.
* All the attributes created for tzp (create_s32_tzp_attr) also are always
* present on the sysfs interface.
*/
static DEVICE_ATTR_RO(type);
static DEVICE_ATTR_RO(temp);
static DEVICE_ATTR_RW(policy);
static DEVICE_ATTR_RO(available_policies);
static DEVICE_ATTR_RW(sustainable_power);
/* These thermal zone device attributes are created based on conditions */
static DEVICE_ATTR_RW(mode);
static DEVICE_ATTR_RW(passive);
/* These attributes are unconditionally added to a thermal zone */
static struct attribute *thermal_zone_dev_attrs[] = {
&dev_attr_type.attr,
&dev_attr_temp.attr,
#if (IS_ENABLED(CONFIG_THERMAL_EMULATION))
&dev_attr_emul_temp.attr,
#endif
&dev_attr_policy.attr,
&dev_attr_available_policies.attr,
&dev_attr_sustainable_power.attr,
&dev_attr_k_po.attr,
&dev_attr_k_pu.attr,
&dev_attr_k_i.attr,
&dev_attr_k_d.attr,
&dev_attr_integral_cutoff.attr,
&dev_attr_slope.attr,
&dev_attr_offset.attr,
NULL,
};
static struct attribute_group thermal_zone_attribute_group = {
.attrs = thermal_zone_dev_attrs,
};
/* We expose mode only if .get_mode is present */
static struct attribute *thermal_zone_mode_attrs[] = {
&dev_attr_mode.attr,
NULL,
};
static umode_t thermal_zone_mode_is_visible(struct kobject *kobj,
struct attribute *attr,
int attrno)
{
struct device *dev = container_of(kobj, struct device, kobj);
struct thermal_zone_device *tz;
tz = container_of(dev, struct thermal_zone_device, device);
if (tz->ops->get_mode)
return attr->mode;
return 0;
}
static struct attribute_group thermal_zone_mode_attribute_group = {
.attrs = thermal_zone_mode_attrs,
.is_visible = thermal_zone_mode_is_visible,
};
/* We expose passive only if passive trips are present */
static struct attribute *thermal_zone_passive_attrs[] = {
&dev_attr_passive.attr,
NULL,
};
static umode_t thermal_zone_passive_is_visible(struct kobject *kobj,
struct attribute *attr,
int attrno)
{
struct device *dev = container_of(kobj, struct device, kobj);
struct thermal_zone_device *tz;
enum thermal_trip_type trip_type;
int count, passive = 0;
tz = container_of(dev, struct thermal_zone_device, device);
for (count = 0; count < tz->trips && !passive; count++) {
tz->ops->get_trip_type(tz, count, &trip_type);
if (trip_type == THERMAL_TRIP_PASSIVE)
passive = 1;
}
if (!passive)
return attr->mode;
return 0;
}
static struct attribute_group thermal_zone_passive_attribute_group = {
.attrs = thermal_zone_passive_attrs,
.is_visible = thermal_zone_passive_is_visible,
};
static const struct attribute_group *thermal_zone_attribute_groups[] = {
&thermal_zone_attribute_group,
&thermal_zone_mode_attribute_group,
&thermal_zone_passive_attribute_group,
/* This is not NULL terminated as we create the group dynamically */
};
/**
* create_trip_attrs() - create attributes for trip points
* @tz: the thermal zone device
* @mask: Writeable trip point bitmap.
*
* helper function to instantiate sysfs entries for every trip
* point and its properties of a struct thermal_zone_device.
*
* Return: 0 on success, the proper error value otherwise.
*/
static int create_trip_attrs(struct thermal_zone_device *tz, int mask)
{
struct attribute **attrs;
int indx;
/* This function works only for zones with at least one trip */
if (tz->trips <= 0)
return -EINVAL;
tz->trip_type_attrs = kcalloc(tz->trips, sizeof(*tz->trip_type_attrs),
GFP_KERNEL);
if (!tz->trip_type_attrs)
return -ENOMEM;
tz->trip_temp_attrs = kcalloc(tz->trips, sizeof(*tz->trip_temp_attrs),
GFP_KERNEL);
if (!tz->trip_temp_attrs) {
kfree(tz->trip_type_attrs);
return -ENOMEM;
}
if (tz->ops->get_trip_hyst) {
tz->trip_hyst_attrs = kcalloc(tz->trips,
sizeof(*tz->trip_hyst_attrs),
GFP_KERNEL);
if (!tz->trip_hyst_attrs) {
kfree(tz->trip_type_attrs);
kfree(tz->trip_temp_attrs);
return -ENOMEM;
}
}
attrs = kcalloc(tz->trips * 3 + 1, sizeof(*attrs), GFP_KERNEL);
if (!attrs) {
kfree(tz->trip_type_attrs);
kfree(tz->trip_temp_attrs);
if (tz->ops->get_trip_hyst)
kfree(tz->trip_hyst_attrs);
return -ENOMEM;
}
for (indx = 0; indx < tz->trips; indx++) {
/* create trip type attribute */
snprintf(tz->trip_type_attrs[indx].name, THERMAL_NAME_LENGTH,
"trip_point_%d_type", indx);
sysfs_attr_init(&tz->trip_type_attrs[indx].attr.attr);
tz->trip_type_attrs[indx].attr.attr.name =
tz->trip_type_attrs[indx].name;
tz->trip_type_attrs[indx].attr.attr.mode = S_IRUGO;
tz->trip_type_attrs[indx].attr.show = trip_point_type_show;
attrs[indx] = &tz->trip_type_attrs[indx].attr.attr;
/* create trip temp attribute */
snprintf(tz->trip_temp_attrs[indx].name, THERMAL_NAME_LENGTH,
"trip_point_%d_temp", indx);
sysfs_attr_init(&tz->trip_temp_attrs[indx].attr.attr);
tz->trip_temp_attrs[indx].attr.attr.name =
tz->trip_temp_attrs[indx].name;
tz->trip_temp_attrs[indx].attr.attr.mode = S_IRUGO;
tz->trip_temp_attrs[indx].attr.show = trip_point_temp_show;
if (IS_ENABLED(CONFIG_THERMAL_WRITABLE_TRIPS) &&
mask & (1 << indx)) {
tz->trip_temp_attrs[indx].attr.attr.mode |= S_IWUSR;
tz->trip_temp_attrs[indx].attr.store =
trip_point_temp_store;
}
attrs[indx + tz->trips] = &tz->trip_temp_attrs[indx].attr.attr;
/* create Optional trip hyst attribute */
if (!tz->ops->get_trip_hyst)
continue;
snprintf(tz->trip_hyst_attrs[indx].name, THERMAL_NAME_LENGTH,
"trip_point_%d_hyst", indx);
sysfs_attr_init(&tz->trip_hyst_attrs[indx].attr.attr);
tz->trip_hyst_attrs[indx].attr.attr.name =
tz->trip_hyst_attrs[indx].name;
tz->trip_hyst_attrs[indx].attr.attr.mode = S_IRUGO;
tz->trip_hyst_attrs[indx].attr.show = trip_point_hyst_show;
if (tz->ops->set_trip_hyst) {
tz->trip_hyst_attrs[indx].attr.attr.mode |= S_IWUSR;
tz->trip_hyst_attrs[indx].attr.store =
trip_point_hyst_store;
}
attrs[indx + tz->trips * 2] =
&tz->trip_hyst_attrs[indx].attr.attr;
}
attrs[tz->trips * 3] = NULL;
tz->trips_attribute_group.attrs = attrs;
return 0;
}
/**
* destroy_trip_attrs() - destroy attributes for trip points
* @tz: the thermal zone device
*
* helper function to free resources allocated by create_trip_attrs()
*/
static void destroy_trip_attrs(struct thermal_zone_device *tz)
{
if (!tz)
return;
kfree(tz->trip_type_attrs);
kfree(tz->trip_temp_attrs);
if (tz->ops->get_trip_hyst)
kfree(tz->trip_hyst_attrs);
kfree(tz->trips_attribute_group.attrs);
}
int thermal_zone_create_device_groups(struct thermal_zone_device *tz,
int mask)
{
const struct attribute_group **groups;
int i, size, result;
/* we need one extra for trips and the NULL to terminate the array */
size = ARRAY_SIZE(thermal_zone_attribute_groups) + 2;
/* This also takes care of API requirement to be NULL terminated */
groups = kcalloc(size, sizeof(*groups), GFP_KERNEL);
if (!groups)
return -ENOMEM;
for (i = 0; i < size - 2; i++)
groups[i] = thermal_zone_attribute_groups[i];
if (tz->trips) {
result = create_trip_attrs(tz, mask);
if (result) {
kfree(groups);
return result;
}
groups[size - 2] = &tz->trips_attribute_group;
}
tz->device.groups = groups;
return 0;
}
void thermal_zone_destroy_device_groups(struct thermal_zone_device *tz)
{
if (!tz)
return;
if (tz->trips)
destroy_trip_attrs(tz);
kfree(tz->device.groups);
}
/* sys I/F for cooling device */
static ssize_t
thermal_cooling_device_type_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
struct thermal_cooling_device *cdev = to_cooling_device(dev);
return sprintf(buf, "%s\n", cdev->type);
}
static ssize_t
thermal_cooling_device_max_state_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
struct thermal_cooling_device *cdev = to_cooling_device(dev);
unsigned long state;
int ret;
ret = cdev->ops->get_max_state(cdev, &state);
if (ret)
return ret;
return sprintf(buf, "%ld\n", state);
}
static ssize_t
thermal_cooling_device_cur_state_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
struct thermal_cooling_device *cdev = to_cooling_device(dev);
unsigned long state;
int ret;
ret = cdev->ops->get_cur_state(cdev, &state);
if (ret)
return ret;
return sprintf(buf, "%ld\n", state);
}
static ssize_t
thermal_cooling_device_cur_state_store(struct device *dev,
struct device_attribute *attr,
const char *buf, size_t count)
{
struct thermal_cooling_device *cdev = to_cooling_device(dev);
unsigned long state;
int result;
if (sscanf(buf, "%ld\n", &state) != 1)
return -EINVAL;
if ((long)state < 0)
return -EINVAL;
result = cdev->ops->set_cur_state(cdev, state);
if (result)
return result;
thermal: Add cooling device's statistics in sysfs This extends the sysfs interface for thermal cooling devices and exposes some pretty useful statistics. These statistics have proven to be quite useful specially while doing benchmarks related to the task scheduler, where we want to make sure that nothing has disrupted the test, specially the cooling device which may have put constraints on the CPUs. The information exposed here tells us to what extent the CPUs were constrained by the thermal framework. The write-only "reset" file is used to reset the statistics. The read-only "time_in_state_ms" file shows the time (in msec) spent by the device in the respective cooling states, and it prints one line per cooling state. The read-only "total_trans" file shows single positive integer value showing the total number of cooling state transitions the device has gone through since the time the cooling device is registered or the time when statistics were reset last. The read-only "trans_table" file shows a two dimensional matrix, where an entry <i,j> (row i, column j) represents the number of transitions from State_i to State_j. This is how the directory structure looks like for a single cooling device: $ ls -R /sys/class/thermal/cooling_device0/ /sys/class/thermal/cooling_device0/: cur_state max_state power stats subsystem type uevent /sys/class/thermal/cooling_device0/power: autosuspend_delay_ms runtime_active_time runtime_suspended_time control runtime_status /sys/class/thermal/cooling_device0/stats: reset time_in_state_ms total_trans trans_table This is tested on ARM 64-bit Hisilicon hikey620 board running Ubuntu and ARM 64-bit Hisilicon hikey960 board running Android. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2018-04-02 18:56:25 +08:00
thermal_cooling_device_stats_update(cdev, state);
return count;
}
static struct device_attribute dev_attr_cdev_type =
__ATTR(type, 0444, thermal_cooling_device_type_show, NULL);
static DEVICE_ATTR(max_state, 0444,
thermal_cooling_device_max_state_show, NULL);
static DEVICE_ATTR(cur_state, 0644,
thermal_cooling_device_cur_state_show,
thermal_cooling_device_cur_state_store);
static struct attribute *cooling_device_attrs[] = {
&dev_attr_cdev_type.attr,
&dev_attr_max_state.attr,
&dev_attr_cur_state.attr,
NULL,
};
static const struct attribute_group cooling_device_attr_group = {
.attrs = cooling_device_attrs,
};
static const struct attribute_group *cooling_device_attr_groups[] = {
&cooling_device_attr_group,
thermal: Add cooling device's statistics in sysfs This extends the sysfs interface for thermal cooling devices and exposes some pretty useful statistics. These statistics have proven to be quite useful specially while doing benchmarks related to the task scheduler, where we want to make sure that nothing has disrupted the test, specially the cooling device which may have put constraints on the CPUs. The information exposed here tells us to what extent the CPUs were constrained by the thermal framework. The write-only "reset" file is used to reset the statistics. The read-only "time_in_state_ms" file shows the time (in msec) spent by the device in the respective cooling states, and it prints one line per cooling state. The read-only "total_trans" file shows single positive integer value showing the total number of cooling state transitions the device has gone through since the time the cooling device is registered or the time when statistics were reset last. The read-only "trans_table" file shows a two dimensional matrix, where an entry <i,j> (row i, column j) represents the number of transitions from State_i to State_j. This is how the directory structure looks like for a single cooling device: $ ls -R /sys/class/thermal/cooling_device0/ /sys/class/thermal/cooling_device0/: cur_state max_state power stats subsystem type uevent /sys/class/thermal/cooling_device0/power: autosuspend_delay_ms runtime_active_time runtime_suspended_time control runtime_status /sys/class/thermal/cooling_device0/stats: reset time_in_state_ms total_trans trans_table This is tested on ARM 64-bit Hisilicon hikey620 board running Ubuntu and ARM 64-bit Hisilicon hikey960 board running Android. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2018-04-02 18:56:25 +08:00
NULL, /* Space allocated for cooling_device_stats_attr_group */
NULL,
};
thermal: Add cooling device's statistics in sysfs This extends the sysfs interface for thermal cooling devices and exposes some pretty useful statistics. These statistics have proven to be quite useful specially while doing benchmarks related to the task scheduler, where we want to make sure that nothing has disrupted the test, specially the cooling device which may have put constraints on the CPUs. The information exposed here tells us to what extent the CPUs were constrained by the thermal framework. The write-only "reset" file is used to reset the statistics. The read-only "time_in_state_ms" file shows the time (in msec) spent by the device in the respective cooling states, and it prints one line per cooling state. The read-only "total_trans" file shows single positive integer value showing the total number of cooling state transitions the device has gone through since the time the cooling device is registered or the time when statistics were reset last. The read-only "trans_table" file shows a two dimensional matrix, where an entry <i,j> (row i, column j) represents the number of transitions from State_i to State_j. This is how the directory structure looks like for a single cooling device: $ ls -R /sys/class/thermal/cooling_device0/ /sys/class/thermal/cooling_device0/: cur_state max_state power stats subsystem type uevent /sys/class/thermal/cooling_device0/power: autosuspend_delay_ms runtime_active_time runtime_suspended_time control runtime_status /sys/class/thermal/cooling_device0/stats: reset time_in_state_ms total_trans trans_table This is tested on ARM 64-bit Hisilicon hikey620 board running Ubuntu and ARM 64-bit Hisilicon hikey960 board running Android. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2018-04-02 18:56:25 +08:00
#ifdef CONFIG_THERMAL_STATISTICS
struct cooling_dev_stats {
spinlock_t lock;
unsigned int total_trans;
unsigned long state;
unsigned long max_states;
ktime_t last_time;
ktime_t *time_in_state;
unsigned int *trans_table;
};
static void update_time_in_state(struct cooling_dev_stats *stats)
{
ktime_t now = ktime_get(), delta;
delta = ktime_sub(now, stats->last_time);
stats->time_in_state[stats->state] =
ktime_add(stats->time_in_state[stats->state], delta);
stats->last_time = now;
}
void thermal_cooling_device_stats_update(struct thermal_cooling_device *cdev,
unsigned long new_state)
{
struct cooling_dev_stats *stats = cdev->stats;
spin_lock(&stats->lock);
if (stats->state == new_state)
goto unlock;
update_time_in_state(stats);
stats->trans_table[stats->state * stats->max_states + new_state]++;
stats->state = new_state;
stats->total_trans++;
unlock:
spin_unlock(&stats->lock);
}
static ssize_t
thermal_cooling_device_total_trans_show(struct device *dev,
struct device_attribute *attr,
char *buf)
{
struct thermal_cooling_device *cdev = to_cooling_device(dev);
struct cooling_dev_stats *stats = cdev->stats;
int ret;
spin_lock(&stats->lock);
ret = sprintf(buf, "%u\n", stats->total_trans);
spin_unlock(&stats->lock);
return ret;
}
static ssize_t
thermal_cooling_device_time_in_state_show(struct device *dev,
struct device_attribute *attr,
char *buf)
{
struct thermal_cooling_device *cdev = to_cooling_device(dev);
struct cooling_dev_stats *stats = cdev->stats;
ssize_t len = 0;
int i;
spin_lock(&stats->lock);
update_time_in_state(stats);
for (i = 0; i < stats->max_states; i++) {
len += sprintf(buf + len, "state%u\t%llu\n", i,
ktime_to_ms(stats->time_in_state[i]));
}
spin_unlock(&stats->lock);
return len;
}
static ssize_t
thermal_cooling_device_reset_store(struct device *dev,
struct device_attribute *attr,
const char *buf, size_t count)
{
struct thermal_cooling_device *cdev = to_cooling_device(dev);
struct cooling_dev_stats *stats = cdev->stats;
int i, states = stats->max_states;
spin_lock(&stats->lock);
stats->total_trans = 0;
stats->last_time = ktime_get();
memset(stats->trans_table, 0,
states * states * sizeof(*stats->trans_table));
for (i = 0; i < stats->max_states; i++)
stats->time_in_state[i] = ktime_set(0, 0);
spin_unlock(&stats->lock);
return count;
}
static ssize_t
thermal_cooling_device_trans_table_show(struct device *dev,
struct device_attribute *attr,
char *buf)
{
struct thermal_cooling_device *cdev = to_cooling_device(dev);
struct cooling_dev_stats *stats = cdev->stats;
ssize_t len = 0;
int i, j;
len += snprintf(buf + len, PAGE_SIZE - len, " From : To\n");
len += snprintf(buf + len, PAGE_SIZE - len, " : ");
for (i = 0; i < stats->max_states; i++) {
if (len >= PAGE_SIZE)
break;
len += snprintf(buf + len, PAGE_SIZE - len, "state%2u ", i);
}
if (len >= PAGE_SIZE)
return PAGE_SIZE;
len += snprintf(buf + len, PAGE_SIZE - len, "\n");
for (i = 0; i < stats->max_states; i++) {
if (len >= PAGE_SIZE)
break;
len += snprintf(buf + len, PAGE_SIZE - len, "state%2u:", i);
for (j = 0; j < stats->max_states; j++) {
if (len >= PAGE_SIZE)
break;
len += snprintf(buf + len, PAGE_SIZE - len, "%8u ",
stats->trans_table[i * stats->max_states + j]);
}
if (len >= PAGE_SIZE)
break;
len += snprintf(buf + len, PAGE_SIZE - len, "\n");
}
if (len >= PAGE_SIZE) {
pr_warn_once("Thermal transition table exceeds PAGE_SIZE. Disabling\n");
return -EFBIG;
}
return len;
}
static DEVICE_ATTR(total_trans, 0444, thermal_cooling_device_total_trans_show,
NULL);
static DEVICE_ATTR(time_in_state_ms, 0444,
thermal_cooling_device_time_in_state_show, NULL);
static DEVICE_ATTR(reset, 0200, NULL, thermal_cooling_device_reset_store);
static DEVICE_ATTR(trans_table, 0444,
thermal_cooling_device_trans_table_show, NULL);
static struct attribute *cooling_device_stats_attrs[] = {
&dev_attr_total_trans.attr,
&dev_attr_time_in_state_ms.attr,
&dev_attr_reset.attr,
&dev_attr_trans_table.attr,
NULL
};
static const struct attribute_group cooling_device_stats_attr_group = {
.attrs = cooling_device_stats_attrs,
.name = "stats"
};
static void cooling_device_stats_setup(struct thermal_cooling_device *cdev)
{
struct cooling_dev_stats *stats;
unsigned long states;
int var;
if (cdev->ops->get_max_state(cdev, &states))
return;
states++; /* Total number of states is highest state + 1 */
var = sizeof(*stats);
var += sizeof(*stats->time_in_state) * states;
var += sizeof(*stats->trans_table) * states * states;
stats = kzalloc(var, GFP_KERNEL);
if (!stats)
return;
stats->time_in_state = (ktime_t *)(stats + 1);
stats->trans_table = (unsigned int *)(stats->time_in_state + states);
cdev->stats = stats;
stats->last_time = ktime_get();
stats->max_states = states;
spin_lock_init(&stats->lock);
/* Fill the empty slot left in cooling_device_attr_groups */
var = ARRAY_SIZE(cooling_device_attr_groups) - 2;
cooling_device_attr_groups[var] = &cooling_device_stats_attr_group;
}
static void cooling_device_stats_destroy(struct thermal_cooling_device *cdev)
{
kfree(cdev->stats);
cdev->stats = NULL;
}
#else
static inline void
cooling_device_stats_setup(struct thermal_cooling_device *cdev) {}
static inline void
cooling_device_stats_destroy(struct thermal_cooling_device *cdev) {}
#endif /* CONFIG_THERMAL_STATISTICS */
void thermal_cooling_device_setup_sysfs(struct thermal_cooling_device *cdev)
{
thermal: Add cooling device's statistics in sysfs This extends the sysfs interface for thermal cooling devices and exposes some pretty useful statistics. These statistics have proven to be quite useful specially while doing benchmarks related to the task scheduler, where we want to make sure that nothing has disrupted the test, specially the cooling device which may have put constraints on the CPUs. The information exposed here tells us to what extent the CPUs were constrained by the thermal framework. The write-only "reset" file is used to reset the statistics. The read-only "time_in_state_ms" file shows the time (in msec) spent by the device in the respective cooling states, and it prints one line per cooling state. The read-only "total_trans" file shows single positive integer value showing the total number of cooling state transitions the device has gone through since the time the cooling device is registered or the time when statistics were reset last. The read-only "trans_table" file shows a two dimensional matrix, where an entry <i,j> (row i, column j) represents the number of transitions from State_i to State_j. This is how the directory structure looks like for a single cooling device: $ ls -R /sys/class/thermal/cooling_device0/ /sys/class/thermal/cooling_device0/: cur_state max_state power stats subsystem type uevent /sys/class/thermal/cooling_device0/power: autosuspend_delay_ms runtime_active_time runtime_suspended_time control runtime_status /sys/class/thermal/cooling_device0/stats: reset time_in_state_ms total_trans trans_table This is tested on ARM 64-bit Hisilicon hikey620 board running Ubuntu and ARM 64-bit Hisilicon hikey960 board running Android. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2018-04-02 18:56:25 +08:00
cooling_device_stats_setup(cdev);
cdev->device.groups = cooling_device_attr_groups;
}
thermal: Add cooling device's statistics in sysfs This extends the sysfs interface for thermal cooling devices and exposes some pretty useful statistics. These statistics have proven to be quite useful specially while doing benchmarks related to the task scheduler, where we want to make sure that nothing has disrupted the test, specially the cooling device which may have put constraints on the CPUs. The information exposed here tells us to what extent the CPUs were constrained by the thermal framework. The write-only "reset" file is used to reset the statistics. The read-only "time_in_state_ms" file shows the time (in msec) spent by the device in the respective cooling states, and it prints one line per cooling state. The read-only "total_trans" file shows single positive integer value showing the total number of cooling state transitions the device has gone through since the time the cooling device is registered or the time when statistics were reset last. The read-only "trans_table" file shows a two dimensional matrix, where an entry <i,j> (row i, column j) represents the number of transitions from State_i to State_j. This is how the directory structure looks like for a single cooling device: $ ls -R /sys/class/thermal/cooling_device0/ /sys/class/thermal/cooling_device0/: cur_state max_state power stats subsystem type uevent /sys/class/thermal/cooling_device0/power: autosuspend_delay_ms runtime_active_time runtime_suspended_time control runtime_status /sys/class/thermal/cooling_device0/stats: reset time_in_state_ms total_trans trans_table This is tested on ARM 64-bit Hisilicon hikey620 board running Ubuntu and ARM 64-bit Hisilicon hikey960 board running Android. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2018-04-02 18:56:25 +08:00
void thermal_cooling_device_destroy_sysfs(struct thermal_cooling_device *cdev)
{
cooling_device_stats_destroy(cdev);
}
/* these helper will be used only at the time of bindig */
ssize_t
thermal_cooling_device_trip_point_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
struct thermal_instance *instance;
instance =
container_of(attr, struct thermal_instance, attr);
if (instance->trip == THERMAL_TRIPS_NONE)
return sprintf(buf, "-1\n");
else
return sprintf(buf, "%d\n", instance->trip);
}
ssize_t
thermal_cooling_device_weight_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
struct thermal_instance *instance;
instance = container_of(attr, struct thermal_instance, weight_attr);
return sprintf(buf, "%d\n", instance->weight);
}
ssize_t
thermal_cooling_device_weight_store(struct device *dev,
struct device_attribute *attr,
const char *buf, size_t count)
{
struct thermal_instance *instance;
int ret, weight;
ret = kstrtoint(buf, 0, &weight);
if (ret)
return ret;
instance = container_of(attr, struct thermal_instance, weight_attr);
instance->weight = weight;
return count;
}