OpenCloudOS-Kernel/tools/perf/builtin-sched.c

3541 lines
88 KiB
C
Raw Normal View History

License cleanup: add SPDX GPL-2.0 license identifier to files with no license Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-01 22:07:57 +08:00
// SPDX-License-Identifier: GPL-2.0
#include "builtin.h"
#include "perf.h"
#include "perf-sys.h"
#include "util/cpumap.h"
perf tools: Save some loops using perf_evlist__id2evsel Since we already ask for PERF_SAMPLE_ID and use it to quickly find the associated evsel, add handler func + data to struct perf_evsel to avoid using chains of if(strcmp(event_name)) and also to avoid all the linear list searches via trace_event_find. To demonstrate the technique convert 'perf sched' to it: # perf sched record sleep 5m And then: Performance counter stats for '/tmp/oldperf sched lat': 646.929438 task-clock # 0.999 CPUs utilized 9 context-switches # 0.000 M/sec 0 CPU-migrations # 0.000 M/sec 20,901 page-faults # 0.032 M/sec 1,290,144,450 cycles # 1.994 GHz <not supported> stalled-cycles-frontend <not supported> stalled-cycles-backend 1,606,158,439 instructions # 1.24 insns per cycle 339,088,395 branches # 524.151 M/sec 4,550,735 branch-misses # 1.34% of all branches 0.647524759 seconds time elapsed Versus: Performance counter stats for 'perf sched lat': 473.564691 task-clock # 0.999 CPUs utilized 9 context-switches # 0.000 M/sec 0 CPU-migrations # 0.000 M/sec 20,903 page-faults # 0.044 M/sec 944,367,984 cycles # 1.994 GHz <not supported> stalled-cycles-frontend <not supported> stalled-cycles-backend 1,442,385,571 instructions # 1.53 insns per cycle 308,383,106 branches # 651.195 M/sec 4,481,784 branch-misses # 1.45% of all branches 0.474215751 seconds time elapsed [root@emilia ~]# Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-1kbzpl74lwi6lavpqke2u2p3@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-11-29 03:57:40 +08:00
#include "util/evlist.h"
#include "util/evsel.h"
#include "util/evsel_fprintf.h"
#include "util/symbol.h"
#include "util/thread.h"
#include "util/header.h"
#include "util/session.h"
#include "util/tool.h"
#include "util/cloexec.h"
#include "util/thread_map.h"
#include "util/color.h"
#include "util/stat.h"
#include "util/string2.h"
perf sched timehist: Add call graph options If callchains were recorded they are appended to the line with a default stack depth of 5: 1.874569 [0011] gcc[31949] 0.014 0.000 1.148 wait_for_completion_killable <- do_fork <- sys_vfork <- stub_vfork <- __vfork 1.874591 [0010] gcc[31951] 0.000 0.000 0.024 __cond_resched <- _cond_resched <- wait_for_completion <- stop_one_cpu <- sched_exec 1.874603 [0010] migration/10[59] 3.350 0.004 0.011 smpboot_thread_fn <- kthread <- ret_from_fork 1.874604 [0011] <idle> 1.148 0.000 0.035 cpu_startup_entry <- start_secondary 1.874723 [0005] <idle> 0.016 0.000 1.383 cpu_startup_entry <- start_secondary 1.874746 [0005] gcc[31949] 0.153 0.078 0.022 do_wait sys_wait4 <- system_call_fastpath <- __GI___waitpid --no-call-graph can be used to not show the callchains. --max-stack is used to control the number of frames shown (default of 5). -x/--excl options can be used to collapse redundant callchains to get more relevant data on screen. Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Ingo Molnar <mingo@kernel.org> Acked-by: Jiri Olsa <jolsa@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/20161116060634.28477-7-namhyung@kernel.org [ Add documentation based on above commit message ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-11-16 14:06:32 +08:00
#include "util/callchain.h"
perf sched timehist: Add option to specify time window of interest Add option to allow user to control analysis window. e.g., collect data for time window and analyze a segment of interest within that window. Committer notes: Testing it: # perf sched record -a usleep 1 [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 1.593 MB perf.data (25 samples) ] # # perf sched timehist | head -18 Samples do not have callchains. time cpu task name wait time sch delay run time [tid/pid] (msec) (msec) (msec) ------------- ------ --------------- --------- --------- -------- 19818.635579 [0002] <idle> 0.000 0.000 0.000 19818.635613 [0000] perf[9116] 0.000 0.000 0.000 19818.635676 [0000] <idle> 0.000 0.000 0.063 19818.635678 [0000] rcuos/2[29] 0.000 0.002 0.001 19818.635696 [0002] perf[9117] 0.000 0.004 0.116 19818.635702 [0000] <idle> 0.001 0.000 0.024 19818.635709 [0002] migration/2[25] 0.000 0.003 0.012 19818.636263 [0000] usleep[9117] 0.005 0.000 0.560 19818.636316 [0000] <idle> 0.560 0.000 0.053 19818.636358 [0002] <idle> 0.129 0.000 0.649 19818.636358 [0000] usleep[9117] 0.053 0.002 0.042 # # perf sched timehist --time 19818.635696, Samples do not have callchains. time cpu task name wait time sch delay run time [tid/pid] (msec) (msec) (msec) ------------- ------ --------------- -------- --------- --------- 19818.635696 [0002] perf[9117] 0.000 0.120 0.000 19818.635702 [0000] <idle> 0.019 0.000 0.006 19818.635709 [0002] migration/2[25] 0.000 0.003 0.012 19818.636263 [0000] usleep[9117] 0.005 0.000 0.560 19818.636316 [0000] <idle> 0.560 0.000 0.053 19818.636358 [0002] <idle> 0.129 0.000 0.649 19818.636358 [0000] usleep[9117] 0.053 0.002 0.042 # # perf sched timehist --time 19818.635696,19818.635709 Samples do not have callchains. time cpu task name wait time sch delay run time [tid/pid] (msec) (msec) (msec) ------------- ------ --------------- --------- --------- --------- 19818.635696 [0002] perf[9117] 0.000 0.120 0.000 19818.635702 [0000] <idle> 0.019 0.000 0.006 19818.635709 [0002] migration/2[25] 0.000 0.003 0.012 19818.635709 [0000] usleep[9117] 0.005 0.000 0.006 # Signed-off-by: David Ahern <dsahern@gmail.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Acked-by: Namhyung Kim <namhyung@kernel.org> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1480439746-42695-5-git-send-email-dsahern@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-11-30 01:15:44 +08:00
#include "util/time-utils.h"
#include <subcmd/pager.h>
#include <subcmd/parse-options.h>
#include "util/trace-event.h"
#include "util/debug.h"
#include "util/event.h"
#include <linux/kernel.h>
#include <linux/log2.h>
#include <linux/zalloc.h>
#include <sys/prctl.h>
#include <sys/resource.h>
#include <inttypes.h>
#include <errno.h>
#include <semaphore.h>
#include <pthread.h>
#include <math.h>
perf sched replay: Alloc the memory of pid_to_task dynamically to adapt to the unexpected change of pid_max The current memory allocation of struct task_desc *pid_to_task[MAX_PID] is in a permanent and preset way, and it has two problems: Problem 1: If the pid_max, which is the max number of pids in the system, is much smaller than MAX_PID (1024*1000), then it causes a waste of stack memory. This may happen in the case where the number of cpu cores is much smaller than 1000. Problem 2: If the pid_max is changed from the default value to a value larger than MAX_PID, then it will cause assertion failure problem. The maximum value of pid_max can be set to pid_max_max (see pidmap_init defined in kernel/pid.c), which equals to PID_MAX_LIMIT. In x86_64, PID_MAX_LIMIT is 4*1024*1024 (defined in include/linux/threads.h). This value is much larger than MAX_PID, and will take up 32768 Kbytes (4*1024*1024*8/1024) for memory allocation of pid_to_task, which is much larger than the default 8192 Kbytes of the stack size of calling process. Due to these two problems, we use calloc to allocate the memory of pid_to_task dynamically. Example: Test environment: x86_64 with 160 cores $ cat /proc/sys/kernel/pid_max 163840 $ echo 1025000 > /proc/sys/kernel/pid_max $ cat /proc/sys/kernel/pid_max 1025000 Run some applications until the pid of some process is greater than the value of MAX_PID (1024*1000). Before this patch: $ perf sched replay run measurement overhead: 221 nsecs sleep measurement overhead: 55480 nsecs the run test took 1000008 nsecs the sleep test took 1063151 nsecs perf: builtin-sched.c:330: register_pid: Assertion `!(pid >= 1024000)' failed. Aborted After this patch: $ perf sched replay run measurement overhead: 221 nsecs sleep measurement overhead: 55435 nsecs the run test took 1000004 nsecs the sleep test took 1059312 nsecs nr_run_events: 10 nr_sleep_events: 1562 nr_wakeup_events: 5 task 0 ( :1: 1), nr_events: 1 task 1 ( :2: 2), nr_events: 1 task 2 ( :3: 3), nr_events: 1 task 3 ( :5: 5), nr_events: 1 ... Signed-off-by: Yunlong Song <yunlong.song@huawei.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/r/1427809596-29559-4-git-send-email-yunlong.song@huawei.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-03-31 21:46:30 +08:00
#include <api/fs/fs.h>
#include <perf/cpumap.h>
#include <linux/time64.h>
perf session: Return error code for perf_session__new() function on failure This patch is to return error code of perf_new_session function on failure instead of NULL. Test Results: Before Fix: $ perf c2c report -input failed to open nput: No such file or directory $ echo $? 0 $ After Fix: $ perf c2c report -input failed to open nput: No such file or directory $ echo $? 254 $ Committer notes: Fix 'perf tests topology' case, where we use that TEST_ASSERT_VAL(..., session), i.e. we need to pass zero in case of failure, which was the case before when NULL was returned by perf_session__new() for failure, but now we need to negate the result of IS_ERR(session) to respect that TEST_ASSERT_VAL) expectation of zero meaning failure. Reported-by: Nageswara R Sastry <rnsastry@linux.vnet.ibm.com> Signed-off-by: Mamatha Inamdar <mamatha4@linux.vnet.ibm.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Tested-by: Nageswara R Sastry <rnsastry@linux.vnet.ibm.com> Acked-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com> Reviewed-by: Jiri Olsa <jolsa@redhat.com> Reviewed-by: Mukesh Ojha <mojha@codeaurora.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alexey Budankov <alexey.budankov@linux.intel.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Jeremie Galarneau <jeremie.galarneau@efficios.com> Cc: Kate Stewart <kstewart@linuxfoundation.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Shawn Landden <shawn@git.icu> Cc: Song Liu <songliubraving@fb.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tzvetomir Stoyanov <tstoyanov@vmware.com> Link: http://lore.kernel.org/lkml/20190822071223.17892.45782.stgit@localhost.localdomain Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-08-22 15:20:49 +08:00
#include <linux/err.h>
#include <linux/ctype.h>
#define PR_SET_NAME 15 /* Set process name */
#define MAX_CPUS 4096
#define COMM_LEN 20
#define SYM_LEN 129
perf sched replay: Increase the MAX_PID value to fix assertion failure problem Current MAX_PID is only 65536, which will cause assertion failure problem when CPU cores are more than 64 in x86_64. This is because the pid_max value in x86_64 is at least PIDS_PER_CPU_DEFAULT * num_possible_cpus() (see function pidmap_init defined in kernel/pid.c), where PIDS_PER_CPU_DEFAULT is 1024 (defined in include/linux/threads.h). Thus for MAX_PID = 65536, the correspoinding CPU cores are 65536/1024=64. This is obviously not enough at all for x86_64, and will cause an assertion failure problem due to BUG_ON(pid >= MAX_PID) in the codes. We increase MAX_PID value from 65536 to 1024*1000, which can be used in x86_64 with 1000 cores. This number is finally decided according to the limitation of stack size of calling process. Use 'ulimit -a', the result shows the stack size of any process is 8192 Kbytes, which is defined in include/uapi/linux/resource.h (#define _STK_LIM (8*1024*1024)). Thus we choose a large enough value for MAX_PID, and make it satisfy to the limitation of the stack size, i.e., making the perf process take up a memory space just smaller than 8192 Kbytes. We have calculated and tested that 1024*1000 is OK for MAX_PID. This means perf sched replay can now be used with at most 1000 cores in x86_64 without any assertion failure problem. Example: Test environment: x86_64 with 160 cores $ cat /proc/sys/kernel/pid_max 163840 Before this patch: $ perf sched replay run measurement overhead: 240 nsecs sleep measurement overhead: 55379 nsecs the run test took 1000004 nsecs the sleep test took 1059424 nsecs perf: builtin-sched.c:330: register_pid: Assertion `!(pid >= 65536)' failed. Aborted After this patch: $ perf sched replay run measurement overhead: 221 nsecs sleep measurement overhead: 55397 nsecs the run test took 999920 nsecs the sleep test took 1053313 nsecs nr_run_events: 10 nr_sleep_events: 1562 nr_wakeup_events: 5 task 0 ( :1: 1), nr_events: 1 task 1 ( :2: 2), nr_events: 1 task 2 ( :3: 3), nr_events: 1 task 3 ( :5: 5), nr_events: 1 ... Signed-off-by: Yunlong Song <yunlong.song@huawei.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/r/1427809596-29559-3-git-send-email-yunlong.song@huawei.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-03-31 21:46:29 +08:00
#define MAX_PID 1024000
perf sched: Add support for sched:sched_stat_runtime events This allows more precise 'perf sched latency' output: --------------------------------------------------------------------------------------- Task | Runtime ms | Switches | Average delay ms | Maximum delay ms | --------------------------------------------------------------------------------------- ksoftirqd/0-4 | 0.010 ms | 2 | avg: 2.476 ms | max: 2.977 ms | perf-12328 | 15.844 ms | 66 | avg: 1.118 ms | max: 9.979 ms | bdi-default-235 | 0.009 ms | 1 | avg: 0.998 ms | max: 0.998 ms | events/1-8 | 0.020 ms | 2 | avg: 0.998 ms | max: 0.998 ms | events/0-7 | 0.018 ms | 2 | avg: 0.992 ms | max: 0.996 ms | sleep-12329 | 0.742 ms | 3 | avg: 0.906 ms | max: 2.289 ms | sshd-12122 | 0.163 ms | 2 | avg: 0.283 ms | max: 0.562 ms | loop-getpid-lon-12322 | 1023.636 ms | 69 | avg: 0.208 ms | max: 5.996 ms | loop-getpid-lon-12321 | 1038.638 ms | 5 | avg: 0.073 ms | max: 0.171 ms | migration/1-5 | 0.000 ms | 1 | avg: 0.006 ms | max: 0.006 ms | --------------------------------------------------------------------------------------- TOTAL: | 2079.078 ms | 153 | ------------------------------------------------- Also, streamline the code a bit more, add asserts for various state machine failures (they should be debugged if they occur) and fix a few odd ends. Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-15 02:04:48 +08:00
struct sched_atom;
struct task_desc {
unsigned long nr;
unsigned long pid;
char comm[COMM_LEN];
unsigned long nr_events;
unsigned long curr_event;
perf sched: Add support for sched:sched_stat_runtime events This allows more precise 'perf sched latency' output: --------------------------------------------------------------------------------------- Task | Runtime ms | Switches | Average delay ms | Maximum delay ms | --------------------------------------------------------------------------------------- ksoftirqd/0-4 | 0.010 ms | 2 | avg: 2.476 ms | max: 2.977 ms | perf-12328 | 15.844 ms | 66 | avg: 1.118 ms | max: 9.979 ms | bdi-default-235 | 0.009 ms | 1 | avg: 0.998 ms | max: 0.998 ms | events/1-8 | 0.020 ms | 2 | avg: 0.998 ms | max: 0.998 ms | events/0-7 | 0.018 ms | 2 | avg: 0.992 ms | max: 0.996 ms | sleep-12329 | 0.742 ms | 3 | avg: 0.906 ms | max: 2.289 ms | sshd-12122 | 0.163 ms | 2 | avg: 0.283 ms | max: 0.562 ms | loop-getpid-lon-12322 | 1023.636 ms | 69 | avg: 0.208 ms | max: 5.996 ms | loop-getpid-lon-12321 | 1038.638 ms | 5 | avg: 0.073 ms | max: 0.171 ms | migration/1-5 | 0.000 ms | 1 | avg: 0.006 ms | max: 0.006 ms | --------------------------------------------------------------------------------------- TOTAL: | 2079.078 ms | 153 | ------------------------------------------------- Also, streamline the code a bit more, add asserts for various state machine failures (they should be debugged if they occur) and fix a few odd ends. Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-15 02:04:48 +08:00
struct sched_atom **atoms;
pthread_t thread;
sem_t sleep_sem;
sem_t ready_for_work;
sem_t work_done_sem;
u64 cpu_usage;
};
enum sched_event_type {
SCHED_EVENT_RUN,
SCHED_EVENT_SLEEP,
SCHED_EVENT_WAKEUP,
perf sched: Add -C option to measure on a specific CPU To refresh, trying to sched record only one CPU results in bogus latencies as below. I fixed^Wmade it stop doing the bad thing today, by following task migration events properly. Before: marge:/root/tmp # taskset -c 1 perf sched record -C 0 -- sleep 10 marge:/root/tmp # perf sched lat ----------------------------------------------------------------------------------------- Task | Runtime ms | Switches | Average delay ms | Maximum delay ms | ----------------------------------------------------------------------------------------- Xorg:4943 | 1.290 ms | 1 | avg: 1670.132 ms | max: 1670.132 ms | hald-addon-stor:3569 | 0.091 ms | 3 | avg: 658.609 ms | max: 1975.797 ms | hald-addon-stor:3573 | 0.209 ms | 4 | avg: 499.138 ms | max: 1990.565 ms | audispd:4270 | 0.012 ms | 1 | avg: 0.015 ms | max: 0.015 ms | .... marge:/root/tmp # perf sched trace|grep 'Xorg:4943' swapper-0 [000] 401.184013288: sched_stat_runtime: task: Xorg:4943 runtime: 1233188 [ns], vruntime: 19105169779 [ns] rt2870TimerQHan-4947 [000] 402.854140127: sched_stat_wait: task: Xorg:4943 wait: 580073 [ns] rt2870TimerQHan-4947 [000] 402.854141770: sched_migrate_task: task Xorg:4943 [140] from: 1 to: 0 rt2870TimerQHan-4947 [000] 402.854143854: sched_stat_wait: task: Xorg:4943 wait: 0 [ns] rt2870TimerQHan-4947 [000] 402.854145397: sched_switch: task rt2870TimerQHan:4947 [140] (D) ==> Xorg:4943 [140] Xorg-4943 [000] 402.854193133: sched_stat_runtime: task: Xorg:4943 runtime: 56546 [ns], vruntime: 11766332500 [ns] Xorg-4943 [000] 402.854196842: sched_switch: task Xorg:4943 [140] (S) ==> swapper:0 [140] After: marge:/root/tmp # taskset -c 1 perf sched record -C 0 -- sleep 10 marge:/root/tmp # perf sched lat ----------------------------------------------------------------------------------------- Task | Runtime ms | Switches | Average delay ms | Maximum delay ms | ----------------------------------------------------------------------------------------- amarokapp:11150 | 271.297 ms | 878 | avg: 0.130 ms | max: 1.057 ms | konsole:5965 | 1.370 ms | 12 | avg: 0.092 ms | max: 0.855 ms | Xorg:4943 | 179.980 ms | 1109 | avg: 0.087 ms | max: 1.206 ms | hald-addon-stor:3574 | 0.212 ms | 9 | avg: 0.040 ms | max: 0.169 ms | hald-addon-stor:3570 | 0.223 ms | 9 | avg: 0.037 ms | max: 0.223 ms | klauncher:5864 | 0.550 ms | 8 | avg: 0.032 ms | max: 0.048 ms | The 'Maximum delay ms' results are now sane. Signed-off-by: Mike Galbraith <efault@gmx.de> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-10 20:46:04 +08:00
SCHED_EVENT_MIGRATION,
};
perf sched: Add support for sched:sched_stat_runtime events This allows more precise 'perf sched latency' output: --------------------------------------------------------------------------------------- Task | Runtime ms | Switches | Average delay ms | Maximum delay ms | --------------------------------------------------------------------------------------- ksoftirqd/0-4 | 0.010 ms | 2 | avg: 2.476 ms | max: 2.977 ms | perf-12328 | 15.844 ms | 66 | avg: 1.118 ms | max: 9.979 ms | bdi-default-235 | 0.009 ms | 1 | avg: 0.998 ms | max: 0.998 ms | events/1-8 | 0.020 ms | 2 | avg: 0.998 ms | max: 0.998 ms | events/0-7 | 0.018 ms | 2 | avg: 0.992 ms | max: 0.996 ms | sleep-12329 | 0.742 ms | 3 | avg: 0.906 ms | max: 2.289 ms | sshd-12122 | 0.163 ms | 2 | avg: 0.283 ms | max: 0.562 ms | loop-getpid-lon-12322 | 1023.636 ms | 69 | avg: 0.208 ms | max: 5.996 ms | loop-getpid-lon-12321 | 1038.638 ms | 5 | avg: 0.073 ms | max: 0.171 ms | migration/1-5 | 0.000 ms | 1 | avg: 0.006 ms | max: 0.006 ms | --------------------------------------------------------------------------------------- TOTAL: | 2079.078 ms | 153 | ------------------------------------------------- Also, streamline the code a bit more, add asserts for various state machine failures (they should be debugged if they occur) and fix a few odd ends. Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-15 02:04:48 +08:00
struct sched_atom {
enum sched_event_type type;
int specific_wait;
u64 timestamp;
u64 duration;
unsigned long nr;
sem_t *wait_sem;
struct task_desc *wakee;
};
#define TASK_STATE_TO_CHAR_STR "RSDTtZXxKWP"
/* task state bitmask, copied from include/linux/sched.h */
#define TASK_RUNNING 0
#define TASK_INTERRUPTIBLE 1
#define TASK_UNINTERRUPTIBLE 2
#define __TASK_STOPPED 4
#define __TASK_TRACED 8
/* in tsk->exit_state */
#define EXIT_DEAD 16
#define EXIT_ZOMBIE 32
#define EXIT_TRACE (EXIT_ZOMBIE | EXIT_DEAD)
/* in tsk->state again */
#define TASK_DEAD 64
#define TASK_WAKEKILL 128
#define TASK_WAKING 256
#define TASK_PARKED 512
enum thread_state {
THREAD_SLEEPING = 0,
THREAD_WAIT_CPU,
THREAD_SCHED_IN,
THREAD_IGNORE
};
struct work_atom {
struct list_head list;
enum thread_state state;
perf tools: Fix processing of randomly serialized sched traces Currently it's possible to meet such too high latency results with 'perf sched latency'. ----------------------------------------------------------------------------------- Task | Runtime ms | Switches | Average delay ms | Maximum delay ms | ----------------------------------------------------------------------------------- xfce4-panel | 0.222 ms | 2 | avg: 4718.345 ms | max: 9436.493 ms | scsi_eh_3 | 3.962 ms | 36 | avg: 55.957 ms | max: 1977.829 ms | The origin is on traces that are sometimes badly serialized across cpus. For example the raw traces that raised such results for xfce4-panel: (1) [init]-0 [000] 1494.663899990: sched_switch: task swapper:0 [140] (R) ==> xfce4-panel:4569 [120] (2) xfce4-panel-4569 [000] 1494.663928373: sched_switch: task xfce4-panel:4569 [120] (S) ==> swapper:0 [140] (3) Xorg-4276 [001] 1494.663860125: sched_wakeup: task xfce4-panel:4569 [120] success=1 [000] (4) Xorg-4276 [001] 1504.098252756: sched_wakeup: task xfce4-panel:4569 [120] success=1 [000] (5) perf-5219 [000] 1504.100353302: sched_switch: task perf:5219 [120] (S) ==> xfce4-panel:4569 [120] The traces are processed in the order they arrive. Then in (2), xfce4-panel sleeps, it is first waken up in (3) and eventually scheduled in (5). The latency reported is then 1504 - 1495 = 9 secs, as reported by perf sched. But this is wrong, we are confident in the fact the traces are nicely serialized while we should actually more trust the timestamps. If we reorder by timestamps we get: (1) Xorg-4276 [001] 1494.663860125: sched_wakeup: task xfce4-panel:4569 [120] success=1 [000] (2) [init]-0 [000] 1494.663899990: sched_switch: task swapper:0 [140] (R) ==> xfce4-panel:4569 [120] (3) xfce4-panel-4569 [000] 1494.663928373: sched_switch: task xfce4-panel:4569 [120] (S) ==> swapper:0 [140] (4) Xorg-4276 [001] 1504.098252756: sched_wakeup: task xfce4-panel:4569 [120] success=1 [000] (5) perf-5219 [000] 1504.100353302: sched_switch: task perf:5219 [120] (S) ==> xfce4-panel:4569 [120] Now the trace make more sense, xfce4-panel is sleeping. Then it is woken up in (1), scheduled in (2) It goes to sleep in (3), woken up in (4) and scheduled in (5). Now, latency captured between (1) and (2) is of 39 us. And between (4) and (5) it is 2.1 ms. Such pattern of bad serializing is the origin of the high latencies reported by perf sched. Basically, we need to check whether wake up time is higher than schedule out time. If it's not the case, we need to tag the current work atom as invalid. Beside that, we may need to work later on a better ordering of the traces given by the kernel. After this patch: xfce4-session | 0.221 ms | 1 | avg: 0.538 ms | max: 0.538 ms | Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-14 09:01:12 +08:00
u64 sched_out_time;
u64 wake_up_time;
u64 sched_in_time;
u64 runtime;
};
perf sched: Add support for sched:sched_stat_runtime events This allows more precise 'perf sched latency' output: --------------------------------------------------------------------------------------- Task | Runtime ms | Switches | Average delay ms | Maximum delay ms | --------------------------------------------------------------------------------------- ksoftirqd/0-4 | 0.010 ms | 2 | avg: 2.476 ms | max: 2.977 ms | perf-12328 | 15.844 ms | 66 | avg: 1.118 ms | max: 9.979 ms | bdi-default-235 | 0.009 ms | 1 | avg: 0.998 ms | max: 0.998 ms | events/1-8 | 0.020 ms | 2 | avg: 0.998 ms | max: 0.998 ms | events/0-7 | 0.018 ms | 2 | avg: 0.992 ms | max: 0.996 ms | sleep-12329 | 0.742 ms | 3 | avg: 0.906 ms | max: 2.289 ms | sshd-12122 | 0.163 ms | 2 | avg: 0.283 ms | max: 0.562 ms | loop-getpid-lon-12322 | 1023.636 ms | 69 | avg: 0.208 ms | max: 5.996 ms | loop-getpid-lon-12321 | 1038.638 ms | 5 | avg: 0.073 ms | max: 0.171 ms | migration/1-5 | 0.000 ms | 1 | avg: 0.006 ms | max: 0.006 ms | --------------------------------------------------------------------------------------- TOTAL: | 2079.078 ms | 153 | ------------------------------------------------- Also, streamline the code a bit more, add asserts for various state machine failures (they should be debugged if they occur) and fix a few odd ends. Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-15 02:04:48 +08:00
struct work_atoms {
struct list_head work_list;
struct thread *thread;
struct rb_node node;
u64 max_lat;
u64 max_lat_at;
u64 total_lat;
u64 nb_atoms;
u64 total_runtime;
perf sched: Add option to merge like comms to lat output Sometimes when debugging large multi-threaded applications it is helpful to collate all of the latency numbers into one bulk record to get an idea of what is going on. This patch does this by merging any entries that belong to the same comm into one entry and then spits out those totals. I've also slightly changed the output so you can see how many threads were merged in the processing. Here is the new default output format ----------------------------------------------------------------------------------------------------------- Task | Runtime ms | Switches | Average delay ms | Maximum delay ms | Maximum delay at | ----------------------------------------------------------------------------------------------------------- chrome:(23) | 740.878 ms | 2612 | avg: 0.022 ms | max: 0.845 ms | max at: 7935.254223 s pulseaudio:1523 | 94.440 ms | 597 | avg: 0.027 ms | max: 0.110 ms | max at: 7934.668372 s threaded-ml:6042 | 72.554 ms | 386 | avg: 0.035 ms | max: 1.186 ms | max at: 7935.330911 s Chrome_IOThread:3832 | 52.388 ms | 456 | avg: 0.021 ms | max: 1.365 ms | max at: 7935.330602 s Chrome_ChildIOT:(7) | 50.694 ms | 743 | avg: 0.021 ms | max: 1.448 ms | max at: 7935.256659 s Compositor:5510 | 30.012 ms | 192 | avg: 0.019 ms | max: 0.131 ms | max at: 7936.636815 s plugin_audio_th:6043 | 24.828 ms | 314 | avg: 0.018 ms | max: 0.143 ms | max at: 7936.205994 s CompositorTileW:(2) | 14.099 ms | 45 | avg: 0.022 ms | max: 0.153 ms | max at: 7937.521800 s the (#) after the task is the number of tasks merged, and then if there were no tasks merged it just shows the pid. Here is the same trace file with the -p option to print the per-pid latency numbers ----------------------------------------------------------------------------------------------------------- Task | Runtime ms | Switches | Average delay ms | Maximum delay ms | Maximum delay at | ----------------------------------------------------------------------------------------------------------- chrome:5500 | 386.872 ms | 387 | avg: 0.023 ms | max: 0.241 ms | max at: 7936.001694 s pulseaudio:1523 | 94.440 ms | 597 | avg: 0.027 ms | max: 0.110 ms | max at: 7934.668372 s threaded-ml:6042 | 72.554 ms | 386 | avg: 0.035 ms | max: 1.186 ms | max at: 7935.330911 s chrome:10226 | 69.710 ms | 251 | avg: 0.023 ms | max: 0.764 ms | max at: 7935.992305 s chrome:4267 | 64.551 ms | 418 | avg: 0.021 ms | max: 0.294 ms | max at: 7937.862427 s chrome:4827 | 62.268 ms | 54 | avg: 0.029 ms | max: 0.666 ms | max at: 7935.992813 s Chrome_IOThread:3832 | 52.388 ms | 456 | avg: 0.021 ms | max: 1.365 ms | max at: 7935.330602 s chrome:3776 | 46.150 ms | 349 | avg: 0.023 ms | max: 0.845 ms | max at: 7935.254223 s Signed-off-by: Josef Bacik <jbacik@fb.com> Acked-by: Ingo Molnar <mingo@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: kernel-team@fb.com Link: http://lkml.kernel.org/r/1432300720-30478-1-git-send-email-jbacik@fb.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-05-22 21:18:40 +08:00
int num_merged;
};
perf sched: Add support for sched:sched_stat_runtime events This allows more precise 'perf sched latency' output: --------------------------------------------------------------------------------------- Task | Runtime ms | Switches | Average delay ms | Maximum delay ms | --------------------------------------------------------------------------------------- ksoftirqd/0-4 | 0.010 ms | 2 | avg: 2.476 ms | max: 2.977 ms | perf-12328 | 15.844 ms | 66 | avg: 1.118 ms | max: 9.979 ms | bdi-default-235 | 0.009 ms | 1 | avg: 0.998 ms | max: 0.998 ms | events/1-8 | 0.020 ms | 2 | avg: 0.998 ms | max: 0.998 ms | events/0-7 | 0.018 ms | 2 | avg: 0.992 ms | max: 0.996 ms | sleep-12329 | 0.742 ms | 3 | avg: 0.906 ms | max: 2.289 ms | sshd-12122 | 0.163 ms | 2 | avg: 0.283 ms | max: 0.562 ms | loop-getpid-lon-12322 | 1023.636 ms | 69 | avg: 0.208 ms | max: 5.996 ms | loop-getpid-lon-12321 | 1038.638 ms | 5 | avg: 0.073 ms | max: 0.171 ms | migration/1-5 | 0.000 ms | 1 | avg: 0.006 ms | max: 0.006 ms | --------------------------------------------------------------------------------------- TOTAL: | 2079.078 ms | 153 | ------------------------------------------------- Also, streamline the code a bit more, add asserts for various state machine failures (they should be debugged if they occur) and fix a few odd ends. Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-15 02:04:48 +08:00
typedef int (*sort_fn_t)(struct work_atoms *, struct work_atoms *);
perf sched: Don't read all tracepoint variables in advance Do it just at the actual consumer of these fields, that way we avoid needless lookups: [root@sandy ~]# perf sched record sleep 30s [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 8.585 MB perf.data (~375063 samples) ] Before: [root@sandy ~]# perf stat -r 10 perf sched lat > /dev/null Performance counter stats for 'perf sched lat' (10 runs): 103.592215 task-clock # 0.993 CPUs utilized ( +- 0.33% ) 12 context-switches # 0.114 K/sec ( +- 3.29% ) 0 cpu-migrations # 0.000 K/sec 7,605 page-faults # 0.073 M/sec ( +- 0.00% ) 345,796,112 cycles # 3.338 GHz ( +- 0.07% ) [82.90%] 106,876,796 stalled-cycles-frontend # 30.91% frontend cycles idle ( +- 0.38% ) [83.23%] 62,060,877 stalled-cycles-backend # 17.95% backend cycles idle ( +- 0.80% ) [67.14%] 628,246,586 instructions # 1.82 insns per cycle # 0.17 stalled cycles per insn ( +- 0.04% ) [83.64%] 134,962,057 branches # 1302.820 M/sec ( +- 0.10% ) [83.64%] 1,233,037 branch-misses # 0.91% of all branches ( +- 0.29% ) [83.41%] 0.104333272 seconds time elapsed ( +- 0.33% ) [root@sandy ~]# perf stat -r 10 perf sched lat > /dev/null Performance counter stats for 'perf sched lat' (10 runs): 98.848272 task-clock # 0.993 CPUs utilized ( +- 0.48% ) 11 context-switches # 0.112 K/sec ( +- 2.83% ) 0 cpu-migrations # 0.003 K/sec ( +- 50.92% ) 7,604 page-faults # 0.077 M/sec ( +- 0.00% ) 332,216,085 cycles # 3.361 GHz ( +- 0.14% ) [82.87%] 100,623,710 stalled-cycles-frontend # 30.29% frontend cycles idle ( +- 0.53% ) [82.95%] 58,788,692 stalled-cycles-backend # 17.70% backend cycles idle ( +- 0.59% ) [67.15%] 609,402,433 instructions # 1.83 insns per cycle # 0.17 stalled cycles per insn ( +- 0.04% ) [83.76%] 131,277,138 branches # 1328.067 M/sec ( +- 0.06% ) [83.77%] 1,117,871 branch-misses # 0.85% of all branches ( +- 0.32% ) [83.51%] 0.099580430 seconds time elapsed ( +- 0.48% ) [root@sandy ~]# Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Namhyung Kim <namhyung@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-kracdpw8wqlr0xjh75uk8g11@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-09-12 06:29:17 +08:00
struct perf_sched;
perf sched: Don't read all tracepoint variables in advance Do it just at the actual consumer of these fields, that way we avoid needless lookups: [root@sandy ~]# perf sched record sleep 30s [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 8.585 MB perf.data (~375063 samples) ] Before: [root@sandy ~]# perf stat -r 10 perf sched lat > /dev/null Performance counter stats for 'perf sched lat' (10 runs): 103.592215 task-clock # 0.993 CPUs utilized ( +- 0.33% ) 12 context-switches # 0.114 K/sec ( +- 3.29% ) 0 cpu-migrations # 0.000 K/sec 7,605 page-faults # 0.073 M/sec ( +- 0.00% ) 345,796,112 cycles # 3.338 GHz ( +- 0.07% ) [82.90%] 106,876,796 stalled-cycles-frontend # 30.91% frontend cycles idle ( +- 0.38% ) [83.23%] 62,060,877 stalled-cycles-backend # 17.95% backend cycles idle ( +- 0.80% ) [67.14%] 628,246,586 instructions # 1.82 insns per cycle # 0.17 stalled cycles per insn ( +- 0.04% ) [83.64%] 134,962,057 branches # 1302.820 M/sec ( +- 0.10% ) [83.64%] 1,233,037 branch-misses # 0.91% of all branches ( +- 0.29% ) [83.41%] 0.104333272 seconds time elapsed ( +- 0.33% ) [root@sandy ~]# perf stat -r 10 perf sched lat > /dev/null Performance counter stats for 'perf sched lat' (10 runs): 98.848272 task-clock # 0.993 CPUs utilized ( +- 0.48% ) 11 context-switches # 0.112 K/sec ( +- 2.83% ) 0 cpu-migrations # 0.003 K/sec ( +- 50.92% ) 7,604 page-faults # 0.077 M/sec ( +- 0.00% ) 332,216,085 cycles # 3.361 GHz ( +- 0.14% ) [82.87%] 100,623,710 stalled-cycles-frontend # 30.29% frontend cycles idle ( +- 0.53% ) [82.95%] 58,788,692 stalled-cycles-backend # 17.70% backend cycles idle ( +- 0.59% ) [67.15%] 609,402,433 instructions # 1.83 insns per cycle # 0.17 stalled cycles per insn ( +- 0.04% ) [83.76%] 131,277,138 branches # 1328.067 M/sec ( +- 0.06% ) [83.77%] 1,117,871 branch-misses # 0.85% of all branches ( +- 0.32% ) [83.51%] 0.099580430 seconds time elapsed ( +- 0.48% ) [root@sandy ~]# Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Namhyung Kim <namhyung@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-kracdpw8wqlr0xjh75uk8g11@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-09-12 06:29:17 +08:00
struct trace_sched_handler {
int (*switch_event)(struct perf_sched *sched, struct evsel *evsel,
perf sched: Don't read all tracepoint variables in advance Do it just at the actual consumer of these fields, that way we avoid needless lookups: [root@sandy ~]# perf sched record sleep 30s [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 8.585 MB perf.data (~375063 samples) ] Before: [root@sandy ~]# perf stat -r 10 perf sched lat > /dev/null Performance counter stats for 'perf sched lat' (10 runs): 103.592215 task-clock # 0.993 CPUs utilized ( +- 0.33% ) 12 context-switches # 0.114 K/sec ( +- 3.29% ) 0 cpu-migrations # 0.000 K/sec 7,605 page-faults # 0.073 M/sec ( +- 0.00% ) 345,796,112 cycles # 3.338 GHz ( +- 0.07% ) [82.90%] 106,876,796 stalled-cycles-frontend # 30.91% frontend cycles idle ( +- 0.38% ) [83.23%] 62,060,877 stalled-cycles-backend # 17.95% backend cycles idle ( +- 0.80% ) [67.14%] 628,246,586 instructions # 1.82 insns per cycle # 0.17 stalled cycles per insn ( +- 0.04% ) [83.64%] 134,962,057 branches # 1302.820 M/sec ( +- 0.10% ) [83.64%] 1,233,037 branch-misses # 0.91% of all branches ( +- 0.29% ) [83.41%] 0.104333272 seconds time elapsed ( +- 0.33% ) [root@sandy ~]# perf stat -r 10 perf sched lat > /dev/null Performance counter stats for 'perf sched lat' (10 runs): 98.848272 task-clock # 0.993 CPUs utilized ( +- 0.48% ) 11 context-switches # 0.112 K/sec ( +- 2.83% ) 0 cpu-migrations # 0.003 K/sec ( +- 50.92% ) 7,604 page-faults # 0.077 M/sec ( +- 0.00% ) 332,216,085 cycles # 3.361 GHz ( +- 0.14% ) [82.87%] 100,623,710 stalled-cycles-frontend # 30.29% frontend cycles idle ( +- 0.53% ) [82.95%] 58,788,692 stalled-cycles-backend # 17.70% backend cycles idle ( +- 0.59% ) [67.15%] 609,402,433 instructions # 1.83 insns per cycle # 0.17 stalled cycles per insn ( +- 0.04% ) [83.76%] 131,277,138 branches # 1328.067 M/sec ( +- 0.06% ) [83.77%] 1,117,871 branch-misses # 0.85% of all branches ( +- 0.32% ) [83.51%] 0.099580430 seconds time elapsed ( +- 0.48% ) [root@sandy ~]# Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Namhyung Kim <namhyung@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-kracdpw8wqlr0xjh75uk8g11@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-09-12 06:29:17 +08:00
struct perf_sample *sample, struct machine *machine);
int (*runtime_event)(struct perf_sched *sched, struct evsel *evsel,
perf sched: Don't read all tracepoint variables in advance Do it just at the actual consumer of these fields, that way we avoid needless lookups: [root@sandy ~]# perf sched record sleep 30s [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 8.585 MB perf.data (~375063 samples) ] Before: [root@sandy ~]# perf stat -r 10 perf sched lat > /dev/null Performance counter stats for 'perf sched lat' (10 runs): 103.592215 task-clock # 0.993 CPUs utilized ( +- 0.33% ) 12 context-switches # 0.114 K/sec ( +- 3.29% ) 0 cpu-migrations # 0.000 K/sec 7,605 page-faults # 0.073 M/sec ( +- 0.00% ) 345,796,112 cycles # 3.338 GHz ( +- 0.07% ) [82.90%] 106,876,796 stalled-cycles-frontend # 30.91% frontend cycles idle ( +- 0.38% ) [83.23%] 62,060,877 stalled-cycles-backend # 17.95% backend cycles idle ( +- 0.80% ) [67.14%] 628,246,586 instructions # 1.82 insns per cycle # 0.17 stalled cycles per insn ( +- 0.04% ) [83.64%] 134,962,057 branches # 1302.820 M/sec ( +- 0.10% ) [83.64%] 1,233,037 branch-misses # 0.91% of all branches ( +- 0.29% ) [83.41%] 0.104333272 seconds time elapsed ( +- 0.33% ) [root@sandy ~]# perf stat -r 10 perf sched lat > /dev/null Performance counter stats for 'perf sched lat' (10 runs): 98.848272 task-clock # 0.993 CPUs utilized ( +- 0.48% ) 11 context-switches # 0.112 K/sec ( +- 2.83% ) 0 cpu-migrations # 0.003 K/sec ( +- 50.92% ) 7,604 page-faults # 0.077 M/sec ( +- 0.00% ) 332,216,085 cycles # 3.361 GHz ( +- 0.14% ) [82.87%] 100,623,710 stalled-cycles-frontend # 30.29% frontend cycles idle ( +- 0.53% ) [82.95%] 58,788,692 stalled-cycles-backend # 17.70% backend cycles idle ( +- 0.59% ) [67.15%] 609,402,433 instructions # 1.83 insns per cycle # 0.17 stalled cycles per insn ( +- 0.04% ) [83.76%] 131,277,138 branches # 1328.067 M/sec ( +- 0.06% ) [83.77%] 1,117,871 branch-misses # 0.85% of all branches ( +- 0.32% ) [83.51%] 0.099580430 seconds time elapsed ( +- 0.48% ) [root@sandy ~]# Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Namhyung Kim <namhyung@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-kracdpw8wqlr0xjh75uk8g11@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-09-12 06:29:17 +08:00
struct perf_sample *sample, struct machine *machine);
int (*wakeup_event)(struct perf_sched *sched, struct evsel *evsel,
perf sched: Don't read all tracepoint variables in advance Do it just at the actual consumer of these fields, that way we avoid needless lookups: [root@sandy ~]# perf sched record sleep 30s [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 8.585 MB perf.data (~375063 samples) ] Before: [root@sandy ~]# perf stat -r 10 perf sched lat > /dev/null Performance counter stats for 'perf sched lat' (10 runs): 103.592215 task-clock # 0.993 CPUs utilized ( +- 0.33% ) 12 context-switches # 0.114 K/sec ( +- 3.29% ) 0 cpu-migrations # 0.000 K/sec 7,605 page-faults # 0.073 M/sec ( +- 0.00% ) 345,796,112 cycles # 3.338 GHz ( +- 0.07% ) [82.90%] 106,876,796 stalled-cycles-frontend # 30.91% frontend cycles idle ( +- 0.38% ) [83.23%] 62,060,877 stalled-cycles-backend # 17.95% backend cycles idle ( +- 0.80% ) [67.14%] 628,246,586 instructions # 1.82 insns per cycle # 0.17 stalled cycles per insn ( +- 0.04% ) [83.64%] 134,962,057 branches # 1302.820 M/sec ( +- 0.10% ) [83.64%] 1,233,037 branch-misses # 0.91% of all branches ( +- 0.29% ) [83.41%] 0.104333272 seconds time elapsed ( +- 0.33% ) [root@sandy ~]# perf stat -r 10 perf sched lat > /dev/null Performance counter stats for 'perf sched lat' (10 runs): 98.848272 task-clock # 0.993 CPUs utilized ( +- 0.48% ) 11 context-switches # 0.112 K/sec ( +- 2.83% ) 0 cpu-migrations # 0.003 K/sec ( +- 50.92% ) 7,604 page-faults # 0.077 M/sec ( +- 0.00% ) 332,216,085 cycles # 3.361 GHz ( +- 0.14% ) [82.87%] 100,623,710 stalled-cycles-frontend # 30.29% frontend cycles idle ( +- 0.53% ) [82.95%] 58,788,692 stalled-cycles-backend # 17.70% backend cycles idle ( +- 0.59% ) [67.15%] 609,402,433 instructions # 1.83 insns per cycle # 0.17 stalled cycles per insn ( +- 0.04% ) [83.76%] 131,277,138 branches # 1328.067 M/sec ( +- 0.06% ) [83.77%] 1,117,871 branch-misses # 0.85% of all branches ( +- 0.32% ) [83.51%] 0.099580430 seconds time elapsed ( +- 0.48% ) [root@sandy ~]# Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Namhyung Kim <namhyung@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-kracdpw8wqlr0xjh75uk8g11@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-09-12 06:29:17 +08:00
struct perf_sample *sample, struct machine *machine);
/* PERF_RECORD_FORK event, not sched_process_fork tracepoint */
int (*fork_event)(struct perf_sched *sched, union perf_event *event,
struct machine *machine);
int (*migrate_task_event)(struct perf_sched *sched,
struct evsel *evsel,
perf sched: Don't read all tracepoint variables in advance Do it just at the actual consumer of these fields, that way we avoid needless lookups: [root@sandy ~]# perf sched record sleep 30s [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 8.585 MB perf.data (~375063 samples) ] Before: [root@sandy ~]# perf stat -r 10 perf sched lat > /dev/null Performance counter stats for 'perf sched lat' (10 runs): 103.592215 task-clock # 0.993 CPUs utilized ( +- 0.33% ) 12 context-switches # 0.114 K/sec ( +- 3.29% ) 0 cpu-migrations # 0.000 K/sec 7,605 page-faults # 0.073 M/sec ( +- 0.00% ) 345,796,112 cycles # 3.338 GHz ( +- 0.07% ) [82.90%] 106,876,796 stalled-cycles-frontend # 30.91% frontend cycles idle ( +- 0.38% ) [83.23%] 62,060,877 stalled-cycles-backend # 17.95% backend cycles idle ( +- 0.80% ) [67.14%] 628,246,586 instructions # 1.82 insns per cycle # 0.17 stalled cycles per insn ( +- 0.04% ) [83.64%] 134,962,057 branches # 1302.820 M/sec ( +- 0.10% ) [83.64%] 1,233,037 branch-misses # 0.91% of all branches ( +- 0.29% ) [83.41%] 0.104333272 seconds time elapsed ( +- 0.33% ) [root@sandy ~]# perf stat -r 10 perf sched lat > /dev/null Performance counter stats for 'perf sched lat' (10 runs): 98.848272 task-clock # 0.993 CPUs utilized ( +- 0.48% ) 11 context-switches # 0.112 K/sec ( +- 2.83% ) 0 cpu-migrations # 0.003 K/sec ( +- 50.92% ) 7,604 page-faults # 0.077 M/sec ( +- 0.00% ) 332,216,085 cycles # 3.361 GHz ( +- 0.14% ) [82.87%] 100,623,710 stalled-cycles-frontend # 30.29% frontend cycles idle ( +- 0.53% ) [82.95%] 58,788,692 stalled-cycles-backend # 17.70% backend cycles idle ( +- 0.59% ) [67.15%] 609,402,433 instructions # 1.83 insns per cycle # 0.17 stalled cycles per insn ( +- 0.04% ) [83.76%] 131,277,138 branches # 1328.067 M/sec ( +- 0.06% ) [83.77%] 1,117,871 branch-misses # 0.85% of all branches ( +- 0.32% ) [83.51%] 0.099580430 seconds time elapsed ( +- 0.48% ) [root@sandy ~]# Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Namhyung Kim <namhyung@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-kracdpw8wqlr0xjh75uk8g11@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-09-12 06:29:17 +08:00
struct perf_sample *sample,
struct machine *machine);
};
#define COLOR_PIDS PERF_COLOR_BLUE
#define COLOR_CPUS PERF_COLOR_BG_RED
struct perf_sched_map {
DECLARE_BITMAP(comp_cpus_mask, MAX_CPUS);
int *comp_cpus;
bool comp;
struct perf_thread_map *color_pids;
const char *color_pids_str;
struct perf_cpu_map *color_cpus;
const char *color_cpus_str;
struct perf_cpu_map *cpus;
const char *cpus_str;
};
struct perf_sched {
struct perf_tool tool;
const char *sort_order;
unsigned long nr_tasks;
perf sched replay: Alloc the memory of pid_to_task dynamically to adapt to the unexpected change of pid_max The current memory allocation of struct task_desc *pid_to_task[MAX_PID] is in a permanent and preset way, and it has two problems: Problem 1: If the pid_max, which is the max number of pids in the system, is much smaller than MAX_PID (1024*1000), then it causes a waste of stack memory. This may happen in the case where the number of cpu cores is much smaller than 1000. Problem 2: If the pid_max is changed from the default value to a value larger than MAX_PID, then it will cause assertion failure problem. The maximum value of pid_max can be set to pid_max_max (see pidmap_init defined in kernel/pid.c), which equals to PID_MAX_LIMIT. In x86_64, PID_MAX_LIMIT is 4*1024*1024 (defined in include/linux/threads.h). This value is much larger than MAX_PID, and will take up 32768 Kbytes (4*1024*1024*8/1024) for memory allocation of pid_to_task, which is much larger than the default 8192 Kbytes of the stack size of calling process. Due to these two problems, we use calloc to allocate the memory of pid_to_task dynamically. Example: Test environment: x86_64 with 160 cores $ cat /proc/sys/kernel/pid_max 163840 $ echo 1025000 > /proc/sys/kernel/pid_max $ cat /proc/sys/kernel/pid_max 1025000 Run some applications until the pid of some process is greater than the value of MAX_PID (1024*1000). Before this patch: $ perf sched replay run measurement overhead: 221 nsecs sleep measurement overhead: 55480 nsecs the run test took 1000008 nsecs the sleep test took 1063151 nsecs perf: builtin-sched.c:330: register_pid: Assertion `!(pid >= 1024000)' failed. Aborted After this patch: $ perf sched replay run measurement overhead: 221 nsecs sleep measurement overhead: 55435 nsecs the run test took 1000004 nsecs the sleep test took 1059312 nsecs nr_run_events: 10 nr_sleep_events: 1562 nr_wakeup_events: 5 task 0 ( :1: 1), nr_events: 1 task 1 ( :2: 2), nr_events: 1 task 2 ( :3: 3), nr_events: 1 task 3 ( :5: 5), nr_events: 1 ... Signed-off-by: Yunlong Song <yunlong.song@huawei.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/r/1427809596-29559-4-git-send-email-yunlong.song@huawei.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-03-31 21:46:30 +08:00
struct task_desc **pid_to_task;
struct task_desc **tasks;
const struct trace_sched_handler *tp_handler;
pthread_mutex_t start_work_mutex;
pthread_mutex_t work_done_wait_mutex;
int profile_cpu;
/*
* Track the current task - that way we can know whether there's any
* weird events, such as a task being switched away that is not current.
*/
int max_cpu;
u32 curr_pid[MAX_CPUS];
struct thread *curr_thread[MAX_CPUS];
char next_shortname1;
char next_shortname2;
unsigned int replay_repeat;
unsigned long nr_run_events;
unsigned long nr_sleep_events;
unsigned long nr_wakeup_events;
unsigned long nr_sleep_corrections;
unsigned long nr_run_events_optimized;
unsigned long targetless_wakeups;
unsigned long multitarget_wakeups;
unsigned long nr_runs;
unsigned long nr_timestamps;
unsigned long nr_unordered_timestamps;
unsigned long nr_context_switch_bugs;
unsigned long nr_events;
unsigned long nr_lost_chunks;
unsigned long nr_lost_events;
u64 run_measurement_overhead;
u64 sleep_measurement_overhead;
u64 start_time;
u64 cpu_usage;
u64 runavg_cpu_usage;
u64 parent_cpu_usage;
u64 runavg_parent_cpu_usage;
u64 sum_runtime;
u64 sum_fluct;
u64 run_avg;
u64 all_runtime;
u64 all_count;
u64 cpu_last_switched[MAX_CPUS];
struct rb_root_cached atom_root, sorted_atom_root, merged_atom_root;
struct list_head sort_list, cmp_pid;
perf sched replay: Fix the EMFILE error caused by the limitation of the maximum open files The soft maximum number of open files for a calling process is 1024, which is defined as INR_OPEN_CUR in include/uapi/linux/fs.h, and the hard maximum number of open files for a calling process is 4096, which is defined as INR_OPEN_MAX in include/uapi/linux/fs.h. Both INR_OPEN_CUR and INR_OPEN_MAX are used to limit the value of RLIMIT_NOFILE in include/asm-generic/resource.h. And the soft maximum number finally decides the limitation of the maximum files which are allowed to be opened. That is to say a process can use at most 1024 file descriptors for its o pened files, or an EMFILE error will happen. This error can be fixed by increasing the soft maximum number, under the constraint that the soft maximum number can not exceed the hard maximum number, or both soft and hard maximum number should be increased simultaneously with privilege. For perf sched replay, it uses sys_perf_event_open to create the file descriptor for each of the tasks in order to handle information of perf events. That is to say each task needs a unique file descriptor. In x86_64, there may be over 1024 or 4096 tasks correspoinding to the record in perf.data, which causes that no enough file descriptors can be used. As a result, EMFILE error happens and stops the replay process. To solve this problem, we adaptively increase the soft and hard maximum number of open files with a '-f' option. Example: Test environment: x86_64 with 160 cores $ cat /proc/sys/kernel/pid_max 163840 $ cat /proc/sys/fs/file-max 6815744 $ ulimit -Sn 1024 $ ulimit -Hn 4096 Before this patch: $ perf sched replay ... task 1549 ( :163132: 163132), nr_events: 1 task 1550 ( :163540: 163540), nr_events: 1 task 1551 ( <unknown>: 0), nr_events: 10 Error: sys_perf_event_open() syscall returned with -1 (Too many open files) After this patch: $ perf sched replay ... task 1549 ( :163132: 163132), nr_events: 1 task 1550 ( :163540: 163540), nr_events: 1 task 1551 ( <unknown>: 0), nr_events: 10 Error: sys_perf_event_open() syscall returned with -1 (Too many open files) Have a try with -f option $ perf sched replay -f ... task 1549 ( :163132: 163132), nr_events: 1 task 1550 ( :163540: 163540), nr_events: 1 task 1551 ( <unknown>: 0), nr_events: 10 ------------------------------------------------------------ #1 : 54.401, ravg: 54.40, cpu: 3285.21 / 3285.21 #2 : 199.548, ravg: 68.92, cpu: 4999.65 / 3456.66 #3 : 170.483, ravg: 79.07, cpu: 1349.94 / 3245.99 #4 : 192.034, ravg: 90.37, cpu: 1322.88 / 3053.67 #5 : 182.929, ravg: 99.62, cpu: 1406.51 / 2888.96 #6 : 152.974, ravg: 104.96, cpu: 1167.54 / 2716.82 #7 : 155.579, ravg: 110.02, cpu: 2992.53 / 2744.39 #8 : 130.557, ravg: 112.08, cpu: 1126.43 / 2582.59 #9 : 138.520, ravg: 114.72, cpu: 1253.22 / 2449.65 #10 : 134.328, ravg: 116.68, cpu: 1587.95 / 2363.48 Signed-off-by: Yunlong Song <yunlong.song@huawei.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/r/1427809596-29559-8-git-send-email-yunlong.song@huawei.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-03-31 21:46:34 +08:00
bool force;
perf sched: Add option to merge like comms to lat output Sometimes when debugging large multi-threaded applications it is helpful to collate all of the latency numbers into one bulk record to get an idea of what is going on. This patch does this by merging any entries that belong to the same comm into one entry and then spits out those totals. I've also slightly changed the output so you can see how many threads were merged in the processing. Here is the new default output format ----------------------------------------------------------------------------------------------------------- Task | Runtime ms | Switches | Average delay ms | Maximum delay ms | Maximum delay at | ----------------------------------------------------------------------------------------------------------- chrome:(23) | 740.878 ms | 2612 | avg: 0.022 ms | max: 0.845 ms | max at: 7935.254223 s pulseaudio:1523 | 94.440 ms | 597 | avg: 0.027 ms | max: 0.110 ms | max at: 7934.668372 s threaded-ml:6042 | 72.554 ms | 386 | avg: 0.035 ms | max: 1.186 ms | max at: 7935.330911 s Chrome_IOThread:3832 | 52.388 ms | 456 | avg: 0.021 ms | max: 1.365 ms | max at: 7935.330602 s Chrome_ChildIOT:(7) | 50.694 ms | 743 | avg: 0.021 ms | max: 1.448 ms | max at: 7935.256659 s Compositor:5510 | 30.012 ms | 192 | avg: 0.019 ms | max: 0.131 ms | max at: 7936.636815 s plugin_audio_th:6043 | 24.828 ms | 314 | avg: 0.018 ms | max: 0.143 ms | max at: 7936.205994 s CompositorTileW:(2) | 14.099 ms | 45 | avg: 0.022 ms | max: 0.153 ms | max at: 7937.521800 s the (#) after the task is the number of tasks merged, and then if there were no tasks merged it just shows the pid. Here is the same trace file with the -p option to print the per-pid latency numbers ----------------------------------------------------------------------------------------------------------- Task | Runtime ms | Switches | Average delay ms | Maximum delay ms | Maximum delay at | ----------------------------------------------------------------------------------------------------------- chrome:5500 | 386.872 ms | 387 | avg: 0.023 ms | max: 0.241 ms | max at: 7936.001694 s pulseaudio:1523 | 94.440 ms | 597 | avg: 0.027 ms | max: 0.110 ms | max at: 7934.668372 s threaded-ml:6042 | 72.554 ms | 386 | avg: 0.035 ms | max: 1.186 ms | max at: 7935.330911 s chrome:10226 | 69.710 ms | 251 | avg: 0.023 ms | max: 0.764 ms | max at: 7935.992305 s chrome:4267 | 64.551 ms | 418 | avg: 0.021 ms | max: 0.294 ms | max at: 7937.862427 s chrome:4827 | 62.268 ms | 54 | avg: 0.029 ms | max: 0.666 ms | max at: 7935.992813 s Chrome_IOThread:3832 | 52.388 ms | 456 | avg: 0.021 ms | max: 1.365 ms | max at: 7935.330602 s chrome:3776 | 46.150 ms | 349 | avg: 0.023 ms | max: 0.845 ms | max at: 7935.254223 s Signed-off-by: Josef Bacik <jbacik@fb.com> Acked-by: Ingo Molnar <mingo@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: kernel-team@fb.com Link: http://lkml.kernel.org/r/1432300720-30478-1-git-send-email-jbacik@fb.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-05-22 21:18:40 +08:00
bool skip_merge;
struct perf_sched_map map;
perf sched timehist: Add summary options The -s/--summary option is to show process runtime statistics. And the -S/--with-summary option is to show the stats with the normal output. $ perf sched timehist -s Runtime summary comm parent sched-in run-time min-run avg-run max-run stddev (count) (msec) (msec) (msec) (msec) % --------------------------------------------------------------------------------------------------------- ksoftirqd/0[3] 2 2 0.011 0.004 0.005 0.006 14.87 rcu_preempt[7] 2 11 0.071 0.002 0.006 0.017 20.23 watchdog/0[11] 2 1 0.002 0.002 0.002 0.002 0.00 watchdog/1[12] 2 1 0.004 0.004 0.004 0.004 0.00 ... Terminated tasks: sleep[7220] 7219 3 0.770 0.087 0.256 0.576 62.28 Idle stats: CPU 0 idle for 2352.006 msec CPU 1 idle for 2764.497 msec CPU 2 idle for 2998.229 msec CPU 3 idle for 2967.800 msec Total number of unique tasks: 52 Total number of context switches: 2532 Total run time (msec): 218.036 Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Ingo Molnar <mingo@kernel.org> Acked-by: Jiri Olsa <jolsa@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/20161116060634.28477-5-namhyung@kernel.org [ Add documentation from last commit, so that docs comes with the cset that introduces the feature ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-11-16 14:06:30 +08:00
/* options for timehist command */
bool summary;
bool summary_only;
bool idle_hist;
perf sched timehist: Add call graph options If callchains were recorded they are appended to the line with a default stack depth of 5: 1.874569 [0011] gcc[31949] 0.014 0.000 1.148 wait_for_completion_killable <- do_fork <- sys_vfork <- stub_vfork <- __vfork 1.874591 [0010] gcc[31951] 0.000 0.000 0.024 __cond_resched <- _cond_resched <- wait_for_completion <- stop_one_cpu <- sched_exec 1.874603 [0010] migration/10[59] 3.350 0.004 0.011 smpboot_thread_fn <- kthread <- ret_from_fork 1.874604 [0011] <idle> 1.148 0.000 0.035 cpu_startup_entry <- start_secondary 1.874723 [0005] <idle> 0.016 0.000 1.383 cpu_startup_entry <- start_secondary 1.874746 [0005] gcc[31949] 0.153 0.078 0.022 do_wait sys_wait4 <- system_call_fastpath <- __GI___waitpid --no-call-graph can be used to not show the callchains. --max-stack is used to control the number of frames shown (default of 5). -x/--excl options can be used to collapse redundant callchains to get more relevant data on screen. Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Ingo Molnar <mingo@kernel.org> Acked-by: Jiri Olsa <jolsa@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/20161116060634.28477-7-namhyung@kernel.org [ Add documentation based on above commit message ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-11-16 14:06:32 +08:00
bool show_callchain;
unsigned int max_stack;
bool show_cpu_visual;
bool show_wakeups;
bool show_next;
bool show_migrations;
bool show_state;
perf sched timehist: Add summary options The -s/--summary option is to show process runtime statistics. And the -S/--with-summary option is to show the stats with the normal output. $ perf sched timehist -s Runtime summary comm parent sched-in run-time min-run avg-run max-run stddev (count) (msec) (msec) (msec) (msec) % --------------------------------------------------------------------------------------------------------- ksoftirqd/0[3] 2 2 0.011 0.004 0.005 0.006 14.87 rcu_preempt[7] 2 11 0.071 0.002 0.006 0.017 20.23 watchdog/0[11] 2 1 0.002 0.002 0.002 0.002 0.00 watchdog/1[12] 2 1 0.004 0.004 0.004 0.004 0.00 ... Terminated tasks: sleep[7220] 7219 3 0.770 0.087 0.256 0.576 62.28 Idle stats: CPU 0 idle for 2352.006 msec CPU 1 idle for 2764.497 msec CPU 2 idle for 2998.229 msec CPU 3 idle for 2967.800 msec Total number of unique tasks: 52 Total number of context switches: 2532 Total run time (msec): 218.036 Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Ingo Molnar <mingo@kernel.org> Acked-by: Jiri Olsa <jolsa@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/20161116060634.28477-5-namhyung@kernel.org [ Add documentation from last commit, so that docs comes with the cset that introduces the feature ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-11-16 14:06:30 +08:00
u64 skipped_samples;
perf sched timehist: Add option to specify time window of interest Add option to allow user to control analysis window. e.g., collect data for time window and analyze a segment of interest within that window. Committer notes: Testing it: # perf sched record -a usleep 1 [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 1.593 MB perf.data (25 samples) ] # # perf sched timehist | head -18 Samples do not have callchains. time cpu task name wait time sch delay run time [tid/pid] (msec) (msec) (msec) ------------- ------ --------------- --------- --------- -------- 19818.635579 [0002] <idle> 0.000 0.000 0.000 19818.635613 [0000] perf[9116] 0.000 0.000 0.000 19818.635676 [0000] <idle> 0.000 0.000 0.063 19818.635678 [0000] rcuos/2[29] 0.000 0.002 0.001 19818.635696 [0002] perf[9117] 0.000 0.004 0.116 19818.635702 [0000] <idle> 0.001 0.000 0.024 19818.635709 [0002] migration/2[25] 0.000 0.003 0.012 19818.636263 [0000] usleep[9117] 0.005 0.000 0.560 19818.636316 [0000] <idle> 0.560 0.000 0.053 19818.636358 [0002] <idle> 0.129 0.000 0.649 19818.636358 [0000] usleep[9117] 0.053 0.002 0.042 # # perf sched timehist --time 19818.635696, Samples do not have callchains. time cpu task name wait time sch delay run time [tid/pid] (msec) (msec) (msec) ------------- ------ --------------- -------- --------- --------- 19818.635696 [0002] perf[9117] 0.000 0.120 0.000 19818.635702 [0000] <idle> 0.019 0.000 0.006 19818.635709 [0002] migration/2[25] 0.000 0.003 0.012 19818.636263 [0000] usleep[9117] 0.005 0.000 0.560 19818.636316 [0000] <idle> 0.560 0.000 0.053 19818.636358 [0002] <idle> 0.129 0.000 0.649 19818.636358 [0000] usleep[9117] 0.053 0.002 0.042 # # perf sched timehist --time 19818.635696,19818.635709 Samples do not have callchains. time cpu task name wait time sch delay run time [tid/pid] (msec) (msec) (msec) ------------- ------ --------------- --------- --------- --------- 19818.635696 [0002] perf[9117] 0.000 0.120 0.000 19818.635702 [0000] <idle> 0.019 0.000 0.006 19818.635709 [0002] migration/2[25] 0.000 0.003 0.012 19818.635709 [0000] usleep[9117] 0.005 0.000 0.006 # Signed-off-by: David Ahern <dsahern@gmail.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Acked-by: Namhyung Kim <namhyung@kernel.org> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1480439746-42695-5-git-send-email-dsahern@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-11-30 01:15:44 +08:00
const char *time_str;
struct perf_time_interval ptime;
struct perf_time_interval hist_time;
};
/* per thread run time data */
struct thread_runtime {
u64 last_time; /* time of previous sched in/out event */
u64 dt_run; /* run time */
u64 dt_sleep; /* time between CPU access by sleep (off cpu) */
u64 dt_iowait; /* time between CPU access by iowait (off cpu) */
u64 dt_preempt; /* time between CPU access by preempt (off cpu) */
u64 dt_delay; /* time between wakeup and sched-in */
u64 ready_to_run; /* time of wakeup */
struct stats run_stats;
u64 total_run_time;
u64 total_sleep_time;
u64 total_iowait_time;
u64 total_preempt_time;
u64 total_delay_time;
int last_state;
char shortname[3];
bool comm_changed;
u64 migrations;
};
/* per event run time data */
struct evsel_runtime {
u64 *last_time; /* time this event was last seen per cpu */
u32 ncpu; /* highest cpu slot allocated */
};
/* per cpu idle time data */
struct idle_thread_runtime {
struct thread_runtime tr;
struct thread *last_thread;
struct rb_root_cached sorted_root;
struct callchain_root callchain;
struct callchain_cursor cursor;
};
/* track idle times per cpu */
static struct thread **idle_threads;
static int idle_max_cpu;
static char idle_comm[] = "<idle>";
static u64 get_nsecs(void)
{
struct timespec ts;
clock_gettime(CLOCK_MONOTONIC, &ts);
return ts.tv_sec * NSEC_PER_SEC + ts.tv_nsec;
}
static void burn_nsecs(struct perf_sched *sched, u64 nsecs)
{
u64 T0 = get_nsecs(), T1;
do {
T1 = get_nsecs();
} while (T1 + sched->run_measurement_overhead < T0 + nsecs);
}
static void sleep_nsecs(u64 nsecs)
{
struct timespec ts;
ts.tv_nsec = nsecs % 999999999;
ts.tv_sec = nsecs / 999999999;
nanosleep(&ts, NULL);
}
static void calibrate_run_measurement_overhead(struct perf_sched *sched)
{
u64 T0, T1, delta, min_delta = NSEC_PER_SEC;
int i;
for (i = 0; i < 10; i++) {
T0 = get_nsecs();
burn_nsecs(sched, 0);
T1 = get_nsecs();
delta = T1-T0;
min_delta = min(min_delta, delta);
}
sched->run_measurement_overhead = min_delta;
printf("run measurement overhead: %" PRIu64 " nsecs\n", min_delta);
}
static void calibrate_sleep_measurement_overhead(struct perf_sched *sched)
{
u64 T0, T1, delta, min_delta = NSEC_PER_SEC;
int i;
for (i = 0; i < 10; i++) {
T0 = get_nsecs();
sleep_nsecs(10000);
T1 = get_nsecs();
delta = T1-T0;
min_delta = min(min_delta, delta);
}
min_delta -= 10000;
sched->sleep_measurement_overhead = min_delta;
printf("sleep measurement overhead: %" PRIu64 " nsecs\n", min_delta);
}
perf sched: Add support for sched:sched_stat_runtime events This allows more precise 'perf sched latency' output: --------------------------------------------------------------------------------------- Task | Runtime ms | Switches | Average delay ms | Maximum delay ms | --------------------------------------------------------------------------------------- ksoftirqd/0-4 | 0.010 ms | 2 | avg: 2.476 ms | max: 2.977 ms | perf-12328 | 15.844 ms | 66 | avg: 1.118 ms | max: 9.979 ms | bdi-default-235 | 0.009 ms | 1 | avg: 0.998 ms | max: 0.998 ms | events/1-8 | 0.020 ms | 2 | avg: 0.998 ms | max: 0.998 ms | events/0-7 | 0.018 ms | 2 | avg: 0.992 ms | max: 0.996 ms | sleep-12329 | 0.742 ms | 3 | avg: 0.906 ms | max: 2.289 ms | sshd-12122 | 0.163 ms | 2 | avg: 0.283 ms | max: 0.562 ms | loop-getpid-lon-12322 | 1023.636 ms | 69 | avg: 0.208 ms | max: 5.996 ms | loop-getpid-lon-12321 | 1038.638 ms | 5 | avg: 0.073 ms | max: 0.171 ms | migration/1-5 | 0.000 ms | 1 | avg: 0.006 ms | max: 0.006 ms | --------------------------------------------------------------------------------------- TOTAL: | 2079.078 ms | 153 | ------------------------------------------------- Also, streamline the code a bit more, add asserts for various state machine failures (they should be debugged if they occur) and fix a few odd ends. Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-15 02:04:48 +08:00
static struct sched_atom *
get_new_event(struct task_desc *task, u64 timestamp)
{
struct sched_atom *event = zalloc(sizeof(*event));
unsigned long idx = task->nr_events;
size_t size;
event->timestamp = timestamp;
event->nr = idx;
task->nr_events++;
perf sched: Add support for sched:sched_stat_runtime events This allows more precise 'perf sched latency' output: --------------------------------------------------------------------------------------- Task | Runtime ms | Switches | Average delay ms | Maximum delay ms | --------------------------------------------------------------------------------------- ksoftirqd/0-4 | 0.010 ms | 2 | avg: 2.476 ms | max: 2.977 ms | perf-12328 | 15.844 ms | 66 | avg: 1.118 ms | max: 9.979 ms | bdi-default-235 | 0.009 ms | 1 | avg: 0.998 ms | max: 0.998 ms | events/1-8 | 0.020 ms | 2 | avg: 0.998 ms | max: 0.998 ms | events/0-7 | 0.018 ms | 2 | avg: 0.992 ms | max: 0.996 ms | sleep-12329 | 0.742 ms | 3 | avg: 0.906 ms | max: 2.289 ms | sshd-12122 | 0.163 ms | 2 | avg: 0.283 ms | max: 0.562 ms | loop-getpid-lon-12322 | 1023.636 ms | 69 | avg: 0.208 ms | max: 5.996 ms | loop-getpid-lon-12321 | 1038.638 ms | 5 | avg: 0.073 ms | max: 0.171 ms | migration/1-5 | 0.000 ms | 1 | avg: 0.006 ms | max: 0.006 ms | --------------------------------------------------------------------------------------- TOTAL: | 2079.078 ms | 153 | ------------------------------------------------- Also, streamline the code a bit more, add asserts for various state machine failures (they should be debugged if they occur) and fix a few odd ends. Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-15 02:04:48 +08:00
size = sizeof(struct sched_atom *) * task->nr_events;
task->atoms = realloc(task->atoms, size);
BUG_ON(!task->atoms);
perf sched: Add support for sched:sched_stat_runtime events This allows more precise 'perf sched latency' output: --------------------------------------------------------------------------------------- Task | Runtime ms | Switches | Average delay ms | Maximum delay ms | --------------------------------------------------------------------------------------- ksoftirqd/0-4 | 0.010 ms | 2 | avg: 2.476 ms | max: 2.977 ms | perf-12328 | 15.844 ms | 66 | avg: 1.118 ms | max: 9.979 ms | bdi-default-235 | 0.009 ms | 1 | avg: 0.998 ms | max: 0.998 ms | events/1-8 | 0.020 ms | 2 | avg: 0.998 ms | max: 0.998 ms | events/0-7 | 0.018 ms | 2 | avg: 0.992 ms | max: 0.996 ms | sleep-12329 | 0.742 ms | 3 | avg: 0.906 ms | max: 2.289 ms | sshd-12122 | 0.163 ms | 2 | avg: 0.283 ms | max: 0.562 ms | loop-getpid-lon-12322 | 1023.636 ms | 69 | avg: 0.208 ms | max: 5.996 ms | loop-getpid-lon-12321 | 1038.638 ms | 5 | avg: 0.073 ms | max: 0.171 ms | migration/1-5 | 0.000 ms | 1 | avg: 0.006 ms | max: 0.006 ms | --------------------------------------------------------------------------------------- TOTAL: | 2079.078 ms | 153 | ------------------------------------------------- Also, streamline the code a bit more, add asserts for various state machine failures (they should be debugged if they occur) and fix a few odd ends. Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-15 02:04:48 +08:00
task->atoms[idx] = event;
return event;
}
perf sched: Add support for sched:sched_stat_runtime events This allows more precise 'perf sched latency' output: --------------------------------------------------------------------------------------- Task | Runtime ms | Switches | Average delay ms | Maximum delay ms | --------------------------------------------------------------------------------------- ksoftirqd/0-4 | 0.010 ms | 2 | avg: 2.476 ms | max: 2.977 ms | perf-12328 | 15.844 ms | 66 | avg: 1.118 ms | max: 9.979 ms | bdi-default-235 | 0.009 ms | 1 | avg: 0.998 ms | max: 0.998 ms | events/1-8 | 0.020 ms | 2 | avg: 0.998 ms | max: 0.998 ms | events/0-7 | 0.018 ms | 2 | avg: 0.992 ms | max: 0.996 ms | sleep-12329 | 0.742 ms | 3 | avg: 0.906 ms | max: 2.289 ms | sshd-12122 | 0.163 ms | 2 | avg: 0.283 ms | max: 0.562 ms | loop-getpid-lon-12322 | 1023.636 ms | 69 | avg: 0.208 ms | max: 5.996 ms | loop-getpid-lon-12321 | 1038.638 ms | 5 | avg: 0.073 ms | max: 0.171 ms | migration/1-5 | 0.000 ms | 1 | avg: 0.006 ms | max: 0.006 ms | --------------------------------------------------------------------------------------- TOTAL: | 2079.078 ms | 153 | ------------------------------------------------- Also, streamline the code a bit more, add asserts for various state machine failures (they should be debugged if they occur) and fix a few odd ends. Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-15 02:04:48 +08:00
static struct sched_atom *last_event(struct task_desc *task)
{
if (!task->nr_events)
return NULL;
perf sched: Add support for sched:sched_stat_runtime events This allows more precise 'perf sched latency' output: --------------------------------------------------------------------------------------- Task | Runtime ms | Switches | Average delay ms | Maximum delay ms | --------------------------------------------------------------------------------------- ksoftirqd/0-4 | 0.010 ms | 2 | avg: 2.476 ms | max: 2.977 ms | perf-12328 | 15.844 ms | 66 | avg: 1.118 ms | max: 9.979 ms | bdi-default-235 | 0.009 ms | 1 | avg: 0.998 ms | max: 0.998 ms | events/1-8 | 0.020 ms | 2 | avg: 0.998 ms | max: 0.998 ms | events/0-7 | 0.018 ms | 2 | avg: 0.992 ms | max: 0.996 ms | sleep-12329 | 0.742 ms | 3 | avg: 0.906 ms | max: 2.289 ms | sshd-12122 | 0.163 ms | 2 | avg: 0.283 ms | max: 0.562 ms | loop-getpid-lon-12322 | 1023.636 ms | 69 | avg: 0.208 ms | max: 5.996 ms | loop-getpid-lon-12321 | 1038.638 ms | 5 | avg: 0.073 ms | max: 0.171 ms | migration/1-5 | 0.000 ms | 1 | avg: 0.006 ms | max: 0.006 ms | --------------------------------------------------------------------------------------- TOTAL: | 2079.078 ms | 153 | ------------------------------------------------- Also, streamline the code a bit more, add asserts for various state machine failures (they should be debugged if they occur) and fix a few odd ends. Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-15 02:04:48 +08:00
return task->atoms[task->nr_events - 1];
}
static void add_sched_event_run(struct perf_sched *sched, struct task_desc *task,
u64 timestamp, u64 duration)
{
perf sched: Add support for sched:sched_stat_runtime events This allows more precise 'perf sched latency' output: --------------------------------------------------------------------------------------- Task | Runtime ms | Switches | Average delay ms | Maximum delay ms | --------------------------------------------------------------------------------------- ksoftirqd/0-4 | 0.010 ms | 2 | avg: 2.476 ms | max: 2.977 ms | perf-12328 | 15.844 ms | 66 | avg: 1.118 ms | max: 9.979 ms | bdi-default-235 | 0.009 ms | 1 | avg: 0.998 ms | max: 0.998 ms | events/1-8 | 0.020 ms | 2 | avg: 0.998 ms | max: 0.998 ms | events/0-7 | 0.018 ms | 2 | avg: 0.992 ms | max: 0.996 ms | sleep-12329 | 0.742 ms | 3 | avg: 0.906 ms | max: 2.289 ms | sshd-12122 | 0.163 ms | 2 | avg: 0.283 ms | max: 0.562 ms | loop-getpid-lon-12322 | 1023.636 ms | 69 | avg: 0.208 ms | max: 5.996 ms | loop-getpid-lon-12321 | 1038.638 ms | 5 | avg: 0.073 ms | max: 0.171 ms | migration/1-5 | 0.000 ms | 1 | avg: 0.006 ms | max: 0.006 ms | --------------------------------------------------------------------------------------- TOTAL: | 2079.078 ms | 153 | ------------------------------------------------- Also, streamline the code a bit more, add asserts for various state machine failures (they should be debugged if they occur) and fix a few odd ends. Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-15 02:04:48 +08:00
struct sched_atom *event, *curr_event = last_event(task);
/*
perf sched: Implement the scheduling workload replay engine Integrate the schedbench.c bits with the raw trace events that we get from the perf machinery, and activate the workload replayer/simulator. Example of a captured 'make -j' workload: $ perf sched run measurement overhead: 90 nsecs sleep measurement overhead: 2724743 nsecs the run test took 1000081 nsecs the sleep test took 2981111 nsecs version = 0.5 ... nr_run_events: 70 nr_sleep_events: 66 nr_wakeup_events: 9 target-less wakeups: 71 multi-target wakeups: 47 run events optimized: 139 task 0 ( perf: 6607), nr_events: 2 task 1 ( perf: 6608), nr_events: 6 task 2 ( : 0), nr_events: 1 task 3 ( make: 6609), nr_events: 5 task 4 ( sh: 6610), nr_events: 4 task 5 ( make: 6611), nr_events: 6 task 6 ( sh: 6612), nr_events: 4 task 7 ( make: 6613), nr_events: 5 task 8 ( migration/11: 25), nr_events: 1 task 9 ( migration/13: 29), nr_events: 1 task 10 ( migration/15: 33), nr_events: 1 task 11 ( migration/9: 21), nr_events: 1 task 12 ( sh: 6614), nr_events: 4 task 13 ( make: 6615), nr_events: 5 task 14 ( sh: 6616), nr_events: 4 task 15 ( make: 6617), nr_events: 7 task 16 ( migration/3: 9), nr_events: 1 task 17 ( migration/5: 13), nr_events: 1 task 18 ( migration/7: 17), nr_events: 1 task 19 ( migration/1: 5), nr_events: 1 task 20 ( sh: 6618), nr_events: 4 task 21 ( make: 6619), nr_events: 5 task 22 ( sh: 6620), nr_events: 4 task 23 ( make: 6621), nr_events: 10 task 24 ( sh: 6623), nr_events: 3 task 25 ( gcc: 6624), nr_events: 4 task 26 ( gcc: 6625), nr_events: 4 task 27 ( gcc: 6626), nr_events: 5 task 28 ( collect2: 6627), nr_events: 5 task 29 ( sh: 6622), nr_events: 1 task 30 ( make: 6628), nr_events: 7 task 31 ( sh: 6630), nr_events: 4 task 32 ( gcc: 6631), nr_events: 4 task 33 ( sh: 6629), nr_events: 1 task 34 ( gcc: 6632), nr_events: 4 task 35 ( gcc: 6633), nr_events: 4 task 36 ( collect2: 6634), nr_events: 4 task 37 ( make: 6635), nr_events: 8 task 38 ( sh: 6637), nr_events: 4 task 39 ( sh: 6636), nr_events: 1 task 40 ( gcc: 6638), nr_events: 4 task 41 ( gcc: 6639), nr_events: 4 task 42 ( gcc: 6640), nr_events: 4 task 43 ( collect2: 6641), nr_events: 4 task 44 ( make: 6642), nr_events: 6 task 45 ( sh: 6643), nr_events: 5 task 46 ( sh: 6644), nr_events: 3 task 47 ( sh: 6645), nr_events: 4 task 48 ( make: 6646), nr_events: 6 task 49 ( sh: 6647), nr_events: 3 task 50 ( make: 6648), nr_events: 5 task 51 ( sh: 6649), nr_events: 5 task 52 ( sh: 6650), nr_events: 6 task 53 ( make: 6651), nr_events: 4 task 54 ( make: 6652), nr_events: 5 task 55 ( make: 6653), nr_events: 4 task 56 ( make: 6654), nr_events: 4 task 57 ( make: 6655), nr_events: 5 task 58 ( sh: 6656), nr_events: 4 task 59 ( gcc: 6657), nr_events: 9 task 60 ( ksoftirqd/3: 10), nr_events: 1 task 61 ( gcc: 6658), nr_events: 4 task 62 ( make: 6659), nr_events: 5 task 63 ( sh: 6660), nr_events: 3 task 64 ( gcc: 6661), nr_events: 5 task 65 ( collect2: 6662), nr_events: 4 ------------------------------------------------------------ #1 : 256.745, ravg: 256.74, cpu: 0.00 / 0.00 #2 : 439.372, ravg: 275.01, cpu: 0.00 / 0.00 #3 : 411.971, ravg: 288.70, cpu: 0.00 / 0.00 #4 : 385.500, ravg: 298.38, cpu: 0.00 / 0.00 #5 : 366.526, ravg: 305.20, cpu: 0.00 / 0.00 #6 : 381.281, ravg: 312.81, cpu: 0.00 / 0.00 #7 : 410.756, ravg: 322.60, cpu: 0.00 / 0.00 #8 : 368.009, ravg: 327.14, cpu: 0.00 / 0.00 #9 : 408.098, ravg: 335.24, cpu: 0.00 / 0.00 #10 : 368.582, ravg: 338.57, cpu: 0.00 / 0.00 I.e. we successfully analyzed the trace, replayed it via real threads and measured the replayed workload's scheduling properties. This is how it looked like in 'top' output: PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 7164 mingo 20 0 1434m 8080 888 R 57.0 0.1 0:02.04 :perf 7165 mingo 20 0 1434m 8080 888 R 41.8 0.1 0:01.52 :perf 7228 mingo 20 0 1434m 8080 888 R 39.8 0.1 0:01.44 :gcc 7225 mingo 20 0 1434m 8080 888 R 33.8 0.1 0:01.26 :gcc 7202 mingo 20 0 1434m 8080 888 R 31.2 0.1 0:01.16 :sh 7222 mingo 20 0 1434m 8080 888 R 25.2 0.1 0:00.96 :sh 7211 mingo 20 0 1434m 8080 888 R 21.9 0.1 0:00.82 :sh 7213 mingo 20 0 1434m 8080 888 D 19.2 0.1 0:00.74 :sh 7194 mingo 20 0 1434m 8080 888 D 18.6 0.1 0:00.72 :make There's still various kinks in it - more patches to come. Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-11 18:12:54 +08:00
* optimize an existing RUN event by merging this one
* to it:
*/
if (curr_event && curr_event->type == SCHED_EVENT_RUN) {
sched->nr_run_events_optimized++;
curr_event->duration += duration;
return;
}
event = get_new_event(task, timestamp);
event->type = SCHED_EVENT_RUN;
event->duration = duration;
sched->nr_run_events++;
}
static void add_sched_event_wakeup(struct perf_sched *sched, struct task_desc *task,
u64 timestamp, struct task_desc *wakee)
{
perf sched: Add support for sched:sched_stat_runtime events This allows more precise 'perf sched latency' output: --------------------------------------------------------------------------------------- Task | Runtime ms | Switches | Average delay ms | Maximum delay ms | --------------------------------------------------------------------------------------- ksoftirqd/0-4 | 0.010 ms | 2 | avg: 2.476 ms | max: 2.977 ms | perf-12328 | 15.844 ms | 66 | avg: 1.118 ms | max: 9.979 ms | bdi-default-235 | 0.009 ms | 1 | avg: 0.998 ms | max: 0.998 ms | events/1-8 | 0.020 ms | 2 | avg: 0.998 ms | max: 0.998 ms | events/0-7 | 0.018 ms | 2 | avg: 0.992 ms | max: 0.996 ms | sleep-12329 | 0.742 ms | 3 | avg: 0.906 ms | max: 2.289 ms | sshd-12122 | 0.163 ms | 2 | avg: 0.283 ms | max: 0.562 ms | loop-getpid-lon-12322 | 1023.636 ms | 69 | avg: 0.208 ms | max: 5.996 ms | loop-getpid-lon-12321 | 1038.638 ms | 5 | avg: 0.073 ms | max: 0.171 ms | migration/1-5 | 0.000 ms | 1 | avg: 0.006 ms | max: 0.006 ms | --------------------------------------------------------------------------------------- TOTAL: | 2079.078 ms | 153 | ------------------------------------------------- Also, streamline the code a bit more, add asserts for various state machine failures (they should be debugged if they occur) and fix a few odd ends. Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-15 02:04:48 +08:00
struct sched_atom *event, *wakee_event;
event = get_new_event(task, timestamp);
event->type = SCHED_EVENT_WAKEUP;
event->wakee = wakee;
wakee_event = last_event(wakee);
if (!wakee_event || wakee_event->type != SCHED_EVENT_SLEEP) {
sched->targetless_wakeups++;
return;
}
if (wakee_event->wait_sem) {
sched->multitarget_wakeups++;
return;
}
wakee_event->wait_sem = zalloc(sizeof(*wakee_event->wait_sem));
sem_init(wakee_event->wait_sem, 0, 0);
wakee_event->specific_wait = 1;
event->wait_sem = wakee_event->wait_sem;
sched->nr_wakeup_events++;
}
static void add_sched_event_sleep(struct perf_sched *sched, struct task_desc *task,
u64 timestamp, u64 task_state __maybe_unused)
{
perf sched: Add support for sched:sched_stat_runtime events This allows more precise 'perf sched latency' output: --------------------------------------------------------------------------------------- Task | Runtime ms | Switches | Average delay ms | Maximum delay ms | --------------------------------------------------------------------------------------- ksoftirqd/0-4 | 0.010 ms | 2 | avg: 2.476 ms | max: 2.977 ms | perf-12328 | 15.844 ms | 66 | avg: 1.118 ms | max: 9.979 ms | bdi-default-235 | 0.009 ms | 1 | avg: 0.998 ms | max: 0.998 ms | events/1-8 | 0.020 ms | 2 | avg: 0.998 ms | max: 0.998 ms | events/0-7 | 0.018 ms | 2 | avg: 0.992 ms | max: 0.996 ms | sleep-12329 | 0.742 ms | 3 | avg: 0.906 ms | max: 2.289 ms | sshd-12122 | 0.163 ms | 2 | avg: 0.283 ms | max: 0.562 ms | loop-getpid-lon-12322 | 1023.636 ms | 69 | avg: 0.208 ms | max: 5.996 ms | loop-getpid-lon-12321 | 1038.638 ms | 5 | avg: 0.073 ms | max: 0.171 ms | migration/1-5 | 0.000 ms | 1 | avg: 0.006 ms | max: 0.006 ms | --------------------------------------------------------------------------------------- TOTAL: | 2079.078 ms | 153 | ------------------------------------------------- Also, streamline the code a bit more, add asserts for various state machine failures (they should be debugged if they occur) and fix a few odd ends. Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-15 02:04:48 +08:00
struct sched_atom *event = get_new_event(task, timestamp);
event->type = SCHED_EVENT_SLEEP;
sched->nr_sleep_events++;
}
static struct task_desc *register_pid(struct perf_sched *sched,
unsigned long pid, const char *comm)
{
struct task_desc *task;
perf sched replay: Alloc the memory of pid_to_task dynamically to adapt to the unexpected change of pid_max The current memory allocation of struct task_desc *pid_to_task[MAX_PID] is in a permanent and preset way, and it has two problems: Problem 1: If the pid_max, which is the max number of pids in the system, is much smaller than MAX_PID (1024*1000), then it causes a waste of stack memory. This may happen in the case where the number of cpu cores is much smaller than 1000. Problem 2: If the pid_max is changed from the default value to a value larger than MAX_PID, then it will cause assertion failure problem. The maximum value of pid_max can be set to pid_max_max (see pidmap_init defined in kernel/pid.c), which equals to PID_MAX_LIMIT. In x86_64, PID_MAX_LIMIT is 4*1024*1024 (defined in include/linux/threads.h). This value is much larger than MAX_PID, and will take up 32768 Kbytes (4*1024*1024*8/1024) for memory allocation of pid_to_task, which is much larger than the default 8192 Kbytes of the stack size of calling process. Due to these two problems, we use calloc to allocate the memory of pid_to_task dynamically. Example: Test environment: x86_64 with 160 cores $ cat /proc/sys/kernel/pid_max 163840 $ echo 1025000 > /proc/sys/kernel/pid_max $ cat /proc/sys/kernel/pid_max 1025000 Run some applications until the pid of some process is greater than the value of MAX_PID (1024*1000). Before this patch: $ perf sched replay run measurement overhead: 221 nsecs sleep measurement overhead: 55480 nsecs the run test took 1000008 nsecs the sleep test took 1063151 nsecs perf: builtin-sched.c:330: register_pid: Assertion `!(pid >= 1024000)' failed. Aborted After this patch: $ perf sched replay run measurement overhead: 221 nsecs sleep measurement overhead: 55435 nsecs the run test took 1000004 nsecs the sleep test took 1059312 nsecs nr_run_events: 10 nr_sleep_events: 1562 nr_wakeup_events: 5 task 0 ( :1: 1), nr_events: 1 task 1 ( :2: 2), nr_events: 1 task 2 ( :3: 3), nr_events: 1 task 3 ( :5: 5), nr_events: 1 ... Signed-off-by: Yunlong Song <yunlong.song@huawei.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/r/1427809596-29559-4-git-send-email-yunlong.song@huawei.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-03-31 21:46:30 +08:00
static int pid_max;
perf sched replay: Alloc the memory of pid_to_task dynamically to adapt to the unexpected change of pid_max The current memory allocation of struct task_desc *pid_to_task[MAX_PID] is in a permanent and preset way, and it has two problems: Problem 1: If the pid_max, which is the max number of pids in the system, is much smaller than MAX_PID (1024*1000), then it causes a waste of stack memory. This may happen in the case where the number of cpu cores is much smaller than 1000. Problem 2: If the pid_max is changed from the default value to a value larger than MAX_PID, then it will cause assertion failure problem. The maximum value of pid_max can be set to pid_max_max (see pidmap_init defined in kernel/pid.c), which equals to PID_MAX_LIMIT. In x86_64, PID_MAX_LIMIT is 4*1024*1024 (defined in include/linux/threads.h). This value is much larger than MAX_PID, and will take up 32768 Kbytes (4*1024*1024*8/1024) for memory allocation of pid_to_task, which is much larger than the default 8192 Kbytes of the stack size of calling process. Due to these two problems, we use calloc to allocate the memory of pid_to_task dynamically. Example: Test environment: x86_64 with 160 cores $ cat /proc/sys/kernel/pid_max 163840 $ echo 1025000 > /proc/sys/kernel/pid_max $ cat /proc/sys/kernel/pid_max 1025000 Run some applications until the pid of some process is greater than the value of MAX_PID (1024*1000). Before this patch: $ perf sched replay run measurement overhead: 221 nsecs sleep measurement overhead: 55480 nsecs the run test took 1000008 nsecs the sleep test took 1063151 nsecs perf: builtin-sched.c:330: register_pid: Assertion `!(pid >= 1024000)' failed. Aborted After this patch: $ perf sched replay run measurement overhead: 221 nsecs sleep measurement overhead: 55435 nsecs the run test took 1000004 nsecs the sleep test took 1059312 nsecs nr_run_events: 10 nr_sleep_events: 1562 nr_wakeup_events: 5 task 0 ( :1: 1), nr_events: 1 task 1 ( :2: 2), nr_events: 1 task 2 ( :3: 3), nr_events: 1 task 3 ( :5: 5), nr_events: 1 ... Signed-off-by: Yunlong Song <yunlong.song@huawei.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/r/1427809596-29559-4-git-send-email-yunlong.song@huawei.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-03-31 21:46:30 +08:00
if (sched->pid_to_task == NULL) {
if (sysctl__read_int("kernel/pid_max", &pid_max) < 0)
pid_max = MAX_PID;
BUG_ON((sched->pid_to_task = calloc(pid_max, sizeof(struct task_desc *))) == NULL);
}
perf sched replay: Realloc the memory of pid_to_task stepwise to adapt to the different pid_max configurations Although the memory of pid_to_task can be allocated via calloc according to the value of /proc/sys/kernel/pid_max, it cannot handle the case when pid_max is changed after 'perf sched record' has created its perf.data. If the new pid_max configured in 'perf sched replay' is smaller than the old pid_max configured in 'perf sched record', then it will cause the assertion failure problem. To solve this problem, we realloc the memory of pid_to_task stepwise once the passed-in pid parameter in register_pid is larger than the current pid_max. Example: Test environment: x86_64 with 160 cores $ cat /proc/sys/kernel/pid_max 163840 $ perf sched record ls $ echo 5000 > /proc/sys/kernel/pid_max $ cat /proc/sys/kernel/pid_max 5000 Before this patch: $ perf sched replay run measurement overhead: 221 nsecs sleep measurement overhead: 55356 nsecs the run test took 1000011 nsecs the sleep test took 1060940 nsecs perf: builtin-sched.c:337: register_pid: Assertion `!(pid >= (unsigned long)pid_max)' failed. Aborted After this patch: $ perf sched replay run measurement overhead: 221 nsecs sleep measurement overhead: 55611 nsecs the run test took 1000026 nsecs the sleep test took 1060486 nsecs nr_run_events: 10 nr_sleep_events: 1562 nr_wakeup_events: 5 task 0 ( :1: 1), nr_events: 1 task 1 ( :2: 2), nr_events: 1 task 2 ( :3: 3), nr_events: 1 task 3 ( :5: 5), nr_events: 1 ... Signed-off-by: Yunlong Song <yunlong.song@huawei.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/r/1427809596-29559-5-git-send-email-yunlong.song@huawei.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-03-31 21:46:31 +08:00
if (pid >= (unsigned long)pid_max) {
BUG_ON((sched->pid_to_task = realloc(sched->pid_to_task, (pid + 1) *
sizeof(struct task_desc *))) == NULL);
while (pid >= (unsigned long)pid_max)
sched->pid_to_task[pid_max++] = NULL;
}
task = sched->pid_to_task[pid];
if (task)
return task;
task = zalloc(sizeof(*task));
task->pid = pid;
task->nr = sched->nr_tasks;
strcpy(task->comm, comm);
/*
* every task starts in sleeping state - this gets ignored
* if there's no wakeup pointing to this sleep state:
*/
add_sched_event_sleep(sched, task, 0, 0);
sched->pid_to_task[pid] = task;
sched->nr_tasks++;
sched->tasks = realloc(sched->tasks, sched->nr_tasks * sizeof(struct task_desc *));
BUG_ON(!sched->tasks);
sched->tasks[task->nr] = task;
if (verbose > 0)
printf("registered task #%ld, PID %ld (%s)\n", sched->nr_tasks, pid, comm);
return task;
}
static void print_task_traces(struct perf_sched *sched)
{
struct task_desc *task;
unsigned long i;
for (i = 0; i < sched->nr_tasks; i++) {
task = sched->tasks[i];
printf("task %6ld (%20s:%10ld), nr_events: %ld\n",
task->nr, task->comm, task->pid, task->nr_events);
}
}
static void add_cross_task_wakeups(struct perf_sched *sched)
{
struct task_desc *task1, *task2;
unsigned long i, j;
for (i = 0; i < sched->nr_tasks; i++) {
task1 = sched->tasks[i];
j = i + 1;
if (j == sched->nr_tasks)
j = 0;
task2 = sched->tasks[j];
add_sched_event_wakeup(sched, task1, 0, task2);
}
}
static void perf_sched__process_event(struct perf_sched *sched,
struct sched_atom *atom)
{
int ret = 0;
perf sched: Add support for sched:sched_stat_runtime events This allows more precise 'perf sched latency' output: --------------------------------------------------------------------------------------- Task | Runtime ms | Switches | Average delay ms | Maximum delay ms | --------------------------------------------------------------------------------------- ksoftirqd/0-4 | 0.010 ms | 2 | avg: 2.476 ms | max: 2.977 ms | perf-12328 | 15.844 ms | 66 | avg: 1.118 ms | max: 9.979 ms | bdi-default-235 | 0.009 ms | 1 | avg: 0.998 ms | max: 0.998 ms | events/1-8 | 0.020 ms | 2 | avg: 0.998 ms | max: 0.998 ms | events/0-7 | 0.018 ms | 2 | avg: 0.992 ms | max: 0.996 ms | sleep-12329 | 0.742 ms | 3 | avg: 0.906 ms | max: 2.289 ms | sshd-12122 | 0.163 ms | 2 | avg: 0.283 ms | max: 0.562 ms | loop-getpid-lon-12322 | 1023.636 ms | 69 | avg: 0.208 ms | max: 5.996 ms | loop-getpid-lon-12321 | 1038.638 ms | 5 | avg: 0.073 ms | max: 0.171 ms | migration/1-5 | 0.000 ms | 1 | avg: 0.006 ms | max: 0.006 ms | --------------------------------------------------------------------------------------- TOTAL: | 2079.078 ms | 153 | ------------------------------------------------- Also, streamline the code a bit more, add asserts for various state machine failures (they should be debugged if they occur) and fix a few odd ends. Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-15 02:04:48 +08:00
switch (atom->type) {
case SCHED_EVENT_RUN:
burn_nsecs(sched, atom->duration);
break;
case SCHED_EVENT_SLEEP:
perf sched: Add support for sched:sched_stat_runtime events This allows more precise 'perf sched latency' output: --------------------------------------------------------------------------------------- Task | Runtime ms | Switches | Average delay ms | Maximum delay ms | --------------------------------------------------------------------------------------- ksoftirqd/0-4 | 0.010 ms | 2 | avg: 2.476 ms | max: 2.977 ms | perf-12328 | 15.844 ms | 66 | avg: 1.118 ms | max: 9.979 ms | bdi-default-235 | 0.009 ms | 1 | avg: 0.998 ms | max: 0.998 ms | events/1-8 | 0.020 ms | 2 | avg: 0.998 ms | max: 0.998 ms | events/0-7 | 0.018 ms | 2 | avg: 0.992 ms | max: 0.996 ms | sleep-12329 | 0.742 ms | 3 | avg: 0.906 ms | max: 2.289 ms | sshd-12122 | 0.163 ms | 2 | avg: 0.283 ms | max: 0.562 ms | loop-getpid-lon-12322 | 1023.636 ms | 69 | avg: 0.208 ms | max: 5.996 ms | loop-getpid-lon-12321 | 1038.638 ms | 5 | avg: 0.073 ms | max: 0.171 ms | migration/1-5 | 0.000 ms | 1 | avg: 0.006 ms | max: 0.006 ms | --------------------------------------------------------------------------------------- TOTAL: | 2079.078 ms | 153 | ------------------------------------------------- Also, streamline the code a bit more, add asserts for various state machine failures (they should be debugged if they occur) and fix a few odd ends. Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-15 02:04:48 +08:00
if (atom->wait_sem)
ret = sem_wait(atom->wait_sem);
BUG_ON(ret);
break;
case SCHED_EVENT_WAKEUP:
perf sched: Add support for sched:sched_stat_runtime events This allows more precise 'perf sched latency' output: --------------------------------------------------------------------------------------- Task | Runtime ms | Switches | Average delay ms | Maximum delay ms | --------------------------------------------------------------------------------------- ksoftirqd/0-4 | 0.010 ms | 2 | avg: 2.476 ms | max: 2.977 ms | perf-12328 | 15.844 ms | 66 | avg: 1.118 ms | max: 9.979 ms | bdi-default-235 | 0.009 ms | 1 | avg: 0.998 ms | max: 0.998 ms | events/1-8 | 0.020 ms | 2 | avg: 0.998 ms | max: 0.998 ms | events/0-7 | 0.018 ms | 2 | avg: 0.992 ms | max: 0.996 ms | sleep-12329 | 0.742 ms | 3 | avg: 0.906 ms | max: 2.289 ms | sshd-12122 | 0.163 ms | 2 | avg: 0.283 ms | max: 0.562 ms | loop-getpid-lon-12322 | 1023.636 ms | 69 | avg: 0.208 ms | max: 5.996 ms | loop-getpid-lon-12321 | 1038.638 ms | 5 | avg: 0.073 ms | max: 0.171 ms | migration/1-5 | 0.000 ms | 1 | avg: 0.006 ms | max: 0.006 ms | --------------------------------------------------------------------------------------- TOTAL: | 2079.078 ms | 153 | ------------------------------------------------- Also, streamline the code a bit more, add asserts for various state machine failures (they should be debugged if they occur) and fix a few odd ends. Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-15 02:04:48 +08:00
if (atom->wait_sem)
ret = sem_post(atom->wait_sem);
BUG_ON(ret);
break;
perf sched: Add -C option to measure on a specific CPU To refresh, trying to sched record only one CPU results in bogus latencies as below. I fixed^Wmade it stop doing the bad thing today, by following task migration events properly. Before: marge:/root/tmp # taskset -c 1 perf sched record -C 0 -- sleep 10 marge:/root/tmp # perf sched lat ----------------------------------------------------------------------------------------- Task | Runtime ms | Switches | Average delay ms | Maximum delay ms | ----------------------------------------------------------------------------------------- Xorg:4943 | 1.290 ms | 1 | avg: 1670.132 ms | max: 1670.132 ms | hald-addon-stor:3569 | 0.091 ms | 3 | avg: 658.609 ms | max: 1975.797 ms | hald-addon-stor:3573 | 0.209 ms | 4 | avg: 499.138 ms | max: 1990.565 ms | audispd:4270 | 0.012 ms | 1 | avg: 0.015 ms | max: 0.015 ms | .... marge:/root/tmp # perf sched trace|grep 'Xorg:4943' swapper-0 [000] 401.184013288: sched_stat_runtime: task: Xorg:4943 runtime: 1233188 [ns], vruntime: 19105169779 [ns] rt2870TimerQHan-4947 [000] 402.854140127: sched_stat_wait: task: Xorg:4943 wait: 580073 [ns] rt2870TimerQHan-4947 [000] 402.854141770: sched_migrate_task: task Xorg:4943 [140] from: 1 to: 0 rt2870TimerQHan-4947 [000] 402.854143854: sched_stat_wait: task: Xorg:4943 wait: 0 [ns] rt2870TimerQHan-4947 [000] 402.854145397: sched_switch: task rt2870TimerQHan:4947 [140] (D) ==> Xorg:4943 [140] Xorg-4943 [000] 402.854193133: sched_stat_runtime: task: Xorg:4943 runtime: 56546 [ns], vruntime: 11766332500 [ns] Xorg-4943 [000] 402.854196842: sched_switch: task Xorg:4943 [140] (S) ==> swapper:0 [140] After: marge:/root/tmp # taskset -c 1 perf sched record -C 0 -- sleep 10 marge:/root/tmp # perf sched lat ----------------------------------------------------------------------------------------- Task | Runtime ms | Switches | Average delay ms | Maximum delay ms | ----------------------------------------------------------------------------------------- amarokapp:11150 | 271.297 ms | 878 | avg: 0.130 ms | max: 1.057 ms | konsole:5965 | 1.370 ms | 12 | avg: 0.092 ms | max: 0.855 ms | Xorg:4943 | 179.980 ms | 1109 | avg: 0.087 ms | max: 1.206 ms | hald-addon-stor:3574 | 0.212 ms | 9 | avg: 0.040 ms | max: 0.169 ms | hald-addon-stor:3570 | 0.223 ms | 9 | avg: 0.037 ms | max: 0.223 ms | klauncher:5864 | 0.550 ms | 8 | avg: 0.032 ms | max: 0.048 ms | The 'Maximum delay ms' results are now sane. Signed-off-by: Mike Galbraith <efault@gmx.de> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-10 20:46:04 +08:00
case SCHED_EVENT_MIGRATION:
break;
default:
BUG_ON(1);
}
}
static u64 get_cpu_usage_nsec_parent(void)
{
struct rusage ru;
u64 sum;
int err;
err = getrusage(RUSAGE_SELF, &ru);
BUG_ON(err);
sum = ru.ru_utime.tv_sec * NSEC_PER_SEC + ru.ru_utime.tv_usec * NSEC_PER_USEC;
sum += ru.ru_stime.tv_sec * NSEC_PER_SEC + ru.ru_stime.tv_usec * NSEC_PER_USEC;
return sum;
}
perf sched replay: Fix the EMFILE error caused by the limitation of the maximum open files The soft maximum number of open files for a calling process is 1024, which is defined as INR_OPEN_CUR in include/uapi/linux/fs.h, and the hard maximum number of open files for a calling process is 4096, which is defined as INR_OPEN_MAX in include/uapi/linux/fs.h. Both INR_OPEN_CUR and INR_OPEN_MAX are used to limit the value of RLIMIT_NOFILE in include/asm-generic/resource.h. And the soft maximum number finally decides the limitation of the maximum files which are allowed to be opened. That is to say a process can use at most 1024 file descriptors for its o pened files, or an EMFILE error will happen. This error can be fixed by increasing the soft maximum number, under the constraint that the soft maximum number can not exceed the hard maximum number, or both soft and hard maximum number should be increased simultaneously with privilege. For perf sched replay, it uses sys_perf_event_open to create the file descriptor for each of the tasks in order to handle information of perf events. That is to say each task needs a unique file descriptor. In x86_64, there may be over 1024 or 4096 tasks correspoinding to the record in perf.data, which causes that no enough file descriptors can be used. As a result, EMFILE error happens and stops the replay process. To solve this problem, we adaptively increase the soft and hard maximum number of open files with a '-f' option. Example: Test environment: x86_64 with 160 cores $ cat /proc/sys/kernel/pid_max 163840 $ cat /proc/sys/fs/file-max 6815744 $ ulimit -Sn 1024 $ ulimit -Hn 4096 Before this patch: $ perf sched replay ... task 1549 ( :163132: 163132), nr_events: 1 task 1550 ( :163540: 163540), nr_events: 1 task 1551 ( <unknown>: 0), nr_events: 10 Error: sys_perf_event_open() syscall returned with -1 (Too many open files) After this patch: $ perf sched replay ... task 1549 ( :163132: 163132), nr_events: 1 task 1550 ( :163540: 163540), nr_events: 1 task 1551 ( <unknown>: 0), nr_events: 10 Error: sys_perf_event_open() syscall returned with -1 (Too many open files) Have a try with -f option $ perf sched replay -f ... task 1549 ( :163132: 163132), nr_events: 1 task 1550 ( :163540: 163540), nr_events: 1 task 1551 ( <unknown>: 0), nr_events: 10 ------------------------------------------------------------ #1 : 54.401, ravg: 54.40, cpu: 3285.21 / 3285.21 #2 : 199.548, ravg: 68.92, cpu: 4999.65 / 3456.66 #3 : 170.483, ravg: 79.07, cpu: 1349.94 / 3245.99 #4 : 192.034, ravg: 90.37, cpu: 1322.88 / 3053.67 #5 : 182.929, ravg: 99.62, cpu: 1406.51 / 2888.96 #6 : 152.974, ravg: 104.96, cpu: 1167.54 / 2716.82 #7 : 155.579, ravg: 110.02, cpu: 2992.53 / 2744.39 #8 : 130.557, ravg: 112.08, cpu: 1126.43 / 2582.59 #9 : 138.520, ravg: 114.72, cpu: 1253.22 / 2449.65 #10 : 134.328, ravg: 116.68, cpu: 1587.95 / 2363.48 Signed-off-by: Yunlong Song <yunlong.song@huawei.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/r/1427809596-29559-8-git-send-email-yunlong.song@huawei.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-03-31 21:46:34 +08:00
static int self_open_counters(struct perf_sched *sched, unsigned long cur_task)
{
struct perf_event_attr attr;
perf sched replay: Fix the EMFILE error caused by the limitation of the maximum open files The soft maximum number of open files for a calling process is 1024, which is defined as INR_OPEN_CUR in include/uapi/linux/fs.h, and the hard maximum number of open files for a calling process is 4096, which is defined as INR_OPEN_MAX in include/uapi/linux/fs.h. Both INR_OPEN_CUR and INR_OPEN_MAX are used to limit the value of RLIMIT_NOFILE in include/asm-generic/resource.h. And the soft maximum number finally decides the limitation of the maximum files which are allowed to be opened. That is to say a process can use at most 1024 file descriptors for its o pened files, or an EMFILE error will happen. This error can be fixed by increasing the soft maximum number, under the constraint that the soft maximum number can not exceed the hard maximum number, or both soft and hard maximum number should be increased simultaneously with privilege. For perf sched replay, it uses sys_perf_event_open to create the file descriptor for each of the tasks in order to handle information of perf events. That is to say each task needs a unique file descriptor. In x86_64, there may be over 1024 or 4096 tasks correspoinding to the record in perf.data, which causes that no enough file descriptors can be used. As a result, EMFILE error happens and stops the replay process. To solve this problem, we adaptively increase the soft and hard maximum number of open files with a '-f' option. Example: Test environment: x86_64 with 160 cores $ cat /proc/sys/kernel/pid_max 163840 $ cat /proc/sys/fs/file-max 6815744 $ ulimit -Sn 1024 $ ulimit -Hn 4096 Before this patch: $ perf sched replay ... task 1549 ( :163132: 163132), nr_events: 1 task 1550 ( :163540: 163540), nr_events: 1 task 1551 ( <unknown>: 0), nr_events: 10 Error: sys_perf_event_open() syscall returned with -1 (Too many open files) After this patch: $ perf sched replay ... task 1549 ( :163132: 163132), nr_events: 1 task 1550 ( :163540: 163540), nr_events: 1 task 1551 ( <unknown>: 0), nr_events: 10 Error: sys_perf_event_open() syscall returned with -1 (Too many open files) Have a try with -f option $ perf sched replay -f ... task 1549 ( :163132: 163132), nr_events: 1 task 1550 ( :163540: 163540), nr_events: 1 task 1551 ( <unknown>: 0), nr_events: 10 ------------------------------------------------------------ #1 : 54.401, ravg: 54.40, cpu: 3285.21 / 3285.21 #2 : 199.548, ravg: 68.92, cpu: 4999.65 / 3456.66 #3 : 170.483, ravg: 79.07, cpu: 1349.94 / 3245.99 #4 : 192.034, ravg: 90.37, cpu: 1322.88 / 3053.67 #5 : 182.929, ravg: 99.62, cpu: 1406.51 / 2888.96 #6 : 152.974, ravg: 104.96, cpu: 1167.54 / 2716.82 #7 : 155.579, ravg: 110.02, cpu: 2992.53 / 2744.39 #8 : 130.557, ravg: 112.08, cpu: 1126.43 / 2582.59 #9 : 138.520, ravg: 114.72, cpu: 1253.22 / 2449.65 #10 : 134.328, ravg: 116.68, cpu: 1587.95 / 2363.48 Signed-off-by: Yunlong Song <yunlong.song@huawei.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/r/1427809596-29559-8-git-send-email-yunlong.song@huawei.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-03-31 21:46:34 +08:00
char sbuf[STRERR_BUFSIZE], info[STRERR_BUFSIZE];
int fd;
perf sched replay: Fix the EMFILE error caused by the limitation of the maximum open files The soft maximum number of open files for a calling process is 1024, which is defined as INR_OPEN_CUR in include/uapi/linux/fs.h, and the hard maximum number of open files for a calling process is 4096, which is defined as INR_OPEN_MAX in include/uapi/linux/fs.h. Both INR_OPEN_CUR and INR_OPEN_MAX are used to limit the value of RLIMIT_NOFILE in include/asm-generic/resource.h. And the soft maximum number finally decides the limitation of the maximum files which are allowed to be opened. That is to say a process can use at most 1024 file descriptors for its o pened files, or an EMFILE error will happen. This error can be fixed by increasing the soft maximum number, under the constraint that the soft maximum number can not exceed the hard maximum number, or both soft and hard maximum number should be increased simultaneously with privilege. For perf sched replay, it uses sys_perf_event_open to create the file descriptor for each of the tasks in order to handle information of perf events. That is to say each task needs a unique file descriptor. In x86_64, there may be over 1024 or 4096 tasks correspoinding to the record in perf.data, which causes that no enough file descriptors can be used. As a result, EMFILE error happens and stops the replay process. To solve this problem, we adaptively increase the soft and hard maximum number of open files with a '-f' option. Example: Test environment: x86_64 with 160 cores $ cat /proc/sys/kernel/pid_max 163840 $ cat /proc/sys/fs/file-max 6815744 $ ulimit -Sn 1024 $ ulimit -Hn 4096 Before this patch: $ perf sched replay ... task 1549 ( :163132: 163132), nr_events: 1 task 1550 ( :163540: 163540), nr_events: 1 task 1551 ( <unknown>: 0), nr_events: 10 Error: sys_perf_event_open() syscall returned with -1 (Too many open files) After this patch: $ perf sched replay ... task 1549 ( :163132: 163132), nr_events: 1 task 1550 ( :163540: 163540), nr_events: 1 task 1551 ( <unknown>: 0), nr_events: 10 Error: sys_perf_event_open() syscall returned with -1 (Too many open files) Have a try with -f option $ perf sched replay -f ... task 1549 ( :163132: 163132), nr_events: 1 task 1550 ( :163540: 163540), nr_events: 1 task 1551 ( <unknown>: 0), nr_events: 10 ------------------------------------------------------------ #1 : 54.401, ravg: 54.40, cpu: 3285.21 / 3285.21 #2 : 199.548, ravg: 68.92, cpu: 4999.65 / 3456.66 #3 : 170.483, ravg: 79.07, cpu: 1349.94 / 3245.99 #4 : 192.034, ravg: 90.37, cpu: 1322.88 / 3053.67 #5 : 182.929, ravg: 99.62, cpu: 1406.51 / 2888.96 #6 : 152.974, ravg: 104.96, cpu: 1167.54 / 2716.82 #7 : 155.579, ravg: 110.02, cpu: 2992.53 / 2744.39 #8 : 130.557, ravg: 112.08, cpu: 1126.43 / 2582.59 #9 : 138.520, ravg: 114.72, cpu: 1253.22 / 2449.65 #10 : 134.328, ravg: 116.68, cpu: 1587.95 / 2363.48 Signed-off-by: Yunlong Song <yunlong.song@huawei.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/r/1427809596-29559-8-git-send-email-yunlong.song@huawei.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-03-31 21:46:34 +08:00
struct rlimit limit;
bool need_privilege = false;
memset(&attr, 0, sizeof(attr));
attr.type = PERF_TYPE_SOFTWARE;
attr.config = PERF_COUNT_SW_TASK_CLOCK;
perf sched replay: Fix the EMFILE error caused by the limitation of the maximum open files The soft maximum number of open files for a calling process is 1024, which is defined as INR_OPEN_CUR in include/uapi/linux/fs.h, and the hard maximum number of open files for a calling process is 4096, which is defined as INR_OPEN_MAX in include/uapi/linux/fs.h. Both INR_OPEN_CUR and INR_OPEN_MAX are used to limit the value of RLIMIT_NOFILE in include/asm-generic/resource.h. And the soft maximum number finally decides the limitation of the maximum files which are allowed to be opened. That is to say a process can use at most 1024 file descriptors for its o pened files, or an EMFILE error will happen. This error can be fixed by increasing the soft maximum number, under the constraint that the soft maximum number can not exceed the hard maximum number, or both soft and hard maximum number should be increased simultaneously with privilege. For perf sched replay, it uses sys_perf_event_open to create the file descriptor for each of the tasks in order to handle information of perf events. That is to say each task needs a unique file descriptor. In x86_64, there may be over 1024 or 4096 tasks correspoinding to the record in perf.data, which causes that no enough file descriptors can be used. As a result, EMFILE error happens and stops the replay process. To solve this problem, we adaptively increase the soft and hard maximum number of open files with a '-f' option. Example: Test environment: x86_64 with 160 cores $ cat /proc/sys/kernel/pid_max 163840 $ cat /proc/sys/fs/file-max 6815744 $ ulimit -Sn 1024 $ ulimit -Hn 4096 Before this patch: $ perf sched replay ... task 1549 ( :163132: 163132), nr_events: 1 task 1550 ( :163540: 163540), nr_events: 1 task 1551 ( <unknown>: 0), nr_events: 10 Error: sys_perf_event_open() syscall returned with -1 (Too many open files) After this patch: $ perf sched replay ... task 1549 ( :163132: 163132), nr_events: 1 task 1550 ( :163540: 163540), nr_events: 1 task 1551 ( <unknown>: 0), nr_events: 10 Error: sys_perf_event_open() syscall returned with -1 (Too many open files) Have a try with -f option $ perf sched replay -f ... task 1549 ( :163132: 163132), nr_events: 1 task 1550 ( :163540: 163540), nr_events: 1 task 1551 ( <unknown>: 0), nr_events: 10 ------------------------------------------------------------ #1 : 54.401, ravg: 54.40, cpu: 3285.21 / 3285.21 #2 : 199.548, ravg: 68.92, cpu: 4999.65 / 3456.66 #3 : 170.483, ravg: 79.07, cpu: 1349.94 / 3245.99 #4 : 192.034, ravg: 90.37, cpu: 1322.88 / 3053.67 #5 : 182.929, ravg: 99.62, cpu: 1406.51 / 2888.96 #6 : 152.974, ravg: 104.96, cpu: 1167.54 / 2716.82 #7 : 155.579, ravg: 110.02, cpu: 2992.53 / 2744.39 #8 : 130.557, ravg: 112.08, cpu: 1126.43 / 2582.59 #9 : 138.520, ravg: 114.72, cpu: 1253.22 / 2449.65 #10 : 134.328, ravg: 116.68, cpu: 1587.95 / 2363.48 Signed-off-by: Yunlong Song <yunlong.song@huawei.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/r/1427809596-29559-8-git-send-email-yunlong.song@huawei.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-03-31 21:46:34 +08:00
force_again:
fd = sys_perf_event_open(&attr, 0, -1, -1,
perf_event_open_cloexec_flag());
perf sched replay: Handle the dead halt of sem_wait when create_tasks() fails for any task Since there is sem_wait for each task in the wait_for_tasks(), e.g. sem_wait(&task->work_done_sem). The sem_wait can continue only when work_done_sem is greater than 0, or it will be blocked. For perf sched replay, one task may sem_post the work_done_sem of another task, which causes the work_done_sem of that task processed in a reasonable sequence, e.g. sem_post, sem_wait, sem_wait, sem_post... This sequence simulates the sched process of the running tasks at the time when perf sched record runs. As a result, all the tasks are required and their threads must be successfully created. If any one (task A) of the tasks fails to create its thread, then another task (task B), whose work_done_sem needs sem_post from that failed task A, may likely block itself due to seg_wait. And this is a dead halt, since task B's thread_func cannot continue at all. To solve this problem, perf sched replay should exit once any task fails to create its thread. Example: Test environment: x86_64 with 160 cores Before this patch: $ perf sched replay ... Error: sys_perf_event_open() syscall returned with -1 (Too many open files) ------------------------------------------------------------ <- dead halt After this patch: $ perf sched replay ... task 1551 ( <unknown>: 0), nr_events: 10 Error: sys_perf_event_open() syscall returned with -1 (Too many open files) $ As shown above, perf sched replay finishes the process after printing an error message and does not block itself. Signed-off-by: Yunlong Song <yunlong.song@huawei.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/r/1427809596-29559-7-git-send-email-yunlong.song@huawei.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-03-31 21:46:33 +08:00
if (fd < 0) {
perf sched replay: Fix the EMFILE error caused by the limitation of the maximum open files The soft maximum number of open files for a calling process is 1024, which is defined as INR_OPEN_CUR in include/uapi/linux/fs.h, and the hard maximum number of open files for a calling process is 4096, which is defined as INR_OPEN_MAX in include/uapi/linux/fs.h. Both INR_OPEN_CUR and INR_OPEN_MAX are used to limit the value of RLIMIT_NOFILE in include/asm-generic/resource.h. And the soft maximum number finally decides the limitation of the maximum files which are allowed to be opened. That is to say a process can use at most 1024 file descriptors for its o pened files, or an EMFILE error will happen. This error can be fixed by increasing the soft maximum number, under the constraint that the soft maximum number can not exceed the hard maximum number, or both soft and hard maximum number should be increased simultaneously with privilege. For perf sched replay, it uses sys_perf_event_open to create the file descriptor for each of the tasks in order to handle information of perf events. That is to say each task needs a unique file descriptor. In x86_64, there may be over 1024 or 4096 tasks correspoinding to the record in perf.data, which causes that no enough file descriptors can be used. As a result, EMFILE error happens and stops the replay process. To solve this problem, we adaptively increase the soft and hard maximum number of open files with a '-f' option. Example: Test environment: x86_64 with 160 cores $ cat /proc/sys/kernel/pid_max 163840 $ cat /proc/sys/fs/file-max 6815744 $ ulimit -Sn 1024 $ ulimit -Hn 4096 Before this patch: $ perf sched replay ... task 1549 ( :163132: 163132), nr_events: 1 task 1550 ( :163540: 163540), nr_events: 1 task 1551 ( <unknown>: 0), nr_events: 10 Error: sys_perf_event_open() syscall returned with -1 (Too many open files) After this patch: $ perf sched replay ... task 1549 ( :163132: 163132), nr_events: 1 task 1550 ( :163540: 163540), nr_events: 1 task 1551 ( <unknown>: 0), nr_events: 10 Error: sys_perf_event_open() syscall returned with -1 (Too many open files) Have a try with -f option $ perf sched replay -f ... task 1549 ( :163132: 163132), nr_events: 1 task 1550 ( :163540: 163540), nr_events: 1 task 1551 ( <unknown>: 0), nr_events: 10 ------------------------------------------------------------ #1 : 54.401, ravg: 54.40, cpu: 3285.21 / 3285.21 #2 : 199.548, ravg: 68.92, cpu: 4999.65 / 3456.66 #3 : 170.483, ravg: 79.07, cpu: 1349.94 / 3245.99 #4 : 192.034, ravg: 90.37, cpu: 1322.88 / 3053.67 #5 : 182.929, ravg: 99.62, cpu: 1406.51 / 2888.96 #6 : 152.974, ravg: 104.96, cpu: 1167.54 / 2716.82 #7 : 155.579, ravg: 110.02, cpu: 2992.53 / 2744.39 #8 : 130.557, ravg: 112.08, cpu: 1126.43 / 2582.59 #9 : 138.520, ravg: 114.72, cpu: 1253.22 / 2449.65 #10 : 134.328, ravg: 116.68, cpu: 1587.95 / 2363.48 Signed-off-by: Yunlong Song <yunlong.song@huawei.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/r/1427809596-29559-8-git-send-email-yunlong.song@huawei.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-03-31 21:46:34 +08:00
if (errno == EMFILE) {
if (sched->force) {
BUG_ON(getrlimit(RLIMIT_NOFILE, &limit) == -1);
limit.rlim_cur += sched->nr_tasks - cur_task;
if (limit.rlim_cur > limit.rlim_max) {
limit.rlim_max = limit.rlim_cur;
need_privilege = true;
}
if (setrlimit(RLIMIT_NOFILE, &limit) == -1) {
if (need_privilege && errno == EPERM)
strcpy(info, "Need privilege\n");
} else
goto force_again;
} else
strcpy(info, "Have a try with -f option\n");
}
pr_err("Error: sys_perf_event_open() syscall returned "
perf sched replay: Fix the EMFILE error caused by the limitation of the maximum open files The soft maximum number of open files for a calling process is 1024, which is defined as INR_OPEN_CUR in include/uapi/linux/fs.h, and the hard maximum number of open files for a calling process is 4096, which is defined as INR_OPEN_MAX in include/uapi/linux/fs.h. Both INR_OPEN_CUR and INR_OPEN_MAX are used to limit the value of RLIMIT_NOFILE in include/asm-generic/resource.h. And the soft maximum number finally decides the limitation of the maximum files which are allowed to be opened. That is to say a process can use at most 1024 file descriptors for its o pened files, or an EMFILE error will happen. This error can be fixed by increasing the soft maximum number, under the constraint that the soft maximum number can not exceed the hard maximum number, or both soft and hard maximum number should be increased simultaneously with privilege. For perf sched replay, it uses sys_perf_event_open to create the file descriptor for each of the tasks in order to handle information of perf events. That is to say each task needs a unique file descriptor. In x86_64, there may be over 1024 or 4096 tasks correspoinding to the record in perf.data, which causes that no enough file descriptors can be used. As a result, EMFILE error happens and stops the replay process. To solve this problem, we adaptively increase the soft and hard maximum number of open files with a '-f' option. Example: Test environment: x86_64 with 160 cores $ cat /proc/sys/kernel/pid_max 163840 $ cat /proc/sys/fs/file-max 6815744 $ ulimit -Sn 1024 $ ulimit -Hn 4096 Before this patch: $ perf sched replay ... task 1549 ( :163132: 163132), nr_events: 1 task 1550 ( :163540: 163540), nr_events: 1 task 1551 ( <unknown>: 0), nr_events: 10 Error: sys_perf_event_open() syscall returned with -1 (Too many open files) After this patch: $ perf sched replay ... task 1549 ( :163132: 163132), nr_events: 1 task 1550 ( :163540: 163540), nr_events: 1 task 1551 ( <unknown>: 0), nr_events: 10 Error: sys_perf_event_open() syscall returned with -1 (Too many open files) Have a try with -f option $ perf sched replay -f ... task 1549 ( :163132: 163132), nr_events: 1 task 1550 ( :163540: 163540), nr_events: 1 task 1551 ( <unknown>: 0), nr_events: 10 ------------------------------------------------------------ #1 : 54.401, ravg: 54.40, cpu: 3285.21 / 3285.21 #2 : 199.548, ravg: 68.92, cpu: 4999.65 / 3456.66 #3 : 170.483, ravg: 79.07, cpu: 1349.94 / 3245.99 #4 : 192.034, ravg: 90.37, cpu: 1322.88 / 3053.67 #5 : 182.929, ravg: 99.62, cpu: 1406.51 / 2888.96 #6 : 152.974, ravg: 104.96, cpu: 1167.54 / 2716.82 #7 : 155.579, ravg: 110.02, cpu: 2992.53 / 2744.39 #8 : 130.557, ravg: 112.08, cpu: 1126.43 / 2582.59 #9 : 138.520, ravg: 114.72, cpu: 1253.22 / 2449.65 #10 : 134.328, ravg: 116.68, cpu: 1587.95 / 2363.48 Signed-off-by: Yunlong Song <yunlong.song@huawei.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/r/1427809596-29559-8-git-send-email-yunlong.song@huawei.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-03-31 21:46:34 +08:00
"with %d (%s)\n%s", fd,
str_error_r(errno, sbuf, sizeof(sbuf)), info);
perf sched replay: Handle the dead halt of sem_wait when create_tasks() fails for any task Since there is sem_wait for each task in the wait_for_tasks(), e.g. sem_wait(&task->work_done_sem). The sem_wait can continue only when work_done_sem is greater than 0, or it will be blocked. For perf sched replay, one task may sem_post the work_done_sem of another task, which causes the work_done_sem of that task processed in a reasonable sequence, e.g. sem_post, sem_wait, sem_wait, sem_post... This sequence simulates the sched process of the running tasks at the time when perf sched record runs. As a result, all the tasks are required and their threads must be successfully created. If any one (task A) of the tasks fails to create its thread, then another task (task B), whose work_done_sem needs sem_post from that failed task A, may likely block itself due to seg_wait. And this is a dead halt, since task B's thread_func cannot continue at all. To solve this problem, perf sched replay should exit once any task fails to create its thread. Example: Test environment: x86_64 with 160 cores Before this patch: $ perf sched replay ... Error: sys_perf_event_open() syscall returned with -1 (Too many open files) ------------------------------------------------------------ <- dead halt After this patch: $ perf sched replay ... task 1551 ( <unknown>: 0), nr_events: 10 Error: sys_perf_event_open() syscall returned with -1 (Too many open files) $ As shown above, perf sched replay finishes the process after printing an error message and does not block itself. Signed-off-by: Yunlong Song <yunlong.song@huawei.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/r/1427809596-29559-7-git-send-email-yunlong.song@huawei.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-03-31 21:46:33 +08:00
exit(EXIT_FAILURE);
}
return fd;
}
static u64 get_cpu_usage_nsec_self(int fd)
{
u64 runtime;
int ret;
ret = read(fd, &runtime, sizeof(runtime));
BUG_ON(ret != sizeof(runtime));
return runtime;
}
struct sched_thread_parms {
struct task_desc *task;
struct perf_sched *sched;
perf sched replay: Fix the segmentation fault problem caused by pr_err in threads The pr_err in self_open_counters() prints error message to stderr. Unlike stdout, stderr uses memory buffer on the stack of each calling process. The pr_err in self_open_counters() works in a thread called thread_func created in function create_tasks, which concurrently creates sched->nr_tasks threads. If the error happens and pr_err prints the error message in each of these threads, the stack size of the perf process (default is 8192 kbytes) will quickly run out and the segmentation fault will happen then. To solve this problem, pr_err with self_open_counters() should be moved from newly created threads to the old main thread of the perf process. Then the pr_err can work in a stable situation without the strange segmentation fault problem. Example: Test environment: x86_64 with 160 cores Before this patch: $ perf sched replay ... task 1549 ( :163132: 163132), nr_events: 1 task 1550 ( :163540: 163540), nr_events: 1 task 1551 ( <unknown>: 0), nr_events: 10 Segmentation fault After this patch: $ perf sched replay ... task 1549 ( :163132: 163132), nr_events: 1 task 1550 ( :163540: 163540), nr_events: 1 task 1551 ( <unknown>: 0), nr_events: 10 ... As shown above, the result continues without any segmentation fault. Signed-off-by: Yunlong Song <yunlong.song@huawei.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/r/1427809596-29559-6-git-send-email-yunlong.song@huawei.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-03-31 21:46:32 +08:00
int fd;
};
static void *thread_func(void *ctx)
{
struct sched_thread_parms *parms = ctx;
struct task_desc *this_task = parms->task;
struct perf_sched *sched = parms->sched;
u64 cpu_usage_0, cpu_usage_1;
unsigned long i, ret;
char comm2[22];
perf sched replay: Fix the segmentation fault problem caused by pr_err in threads The pr_err in self_open_counters() prints error message to stderr. Unlike stdout, stderr uses memory buffer on the stack of each calling process. The pr_err in self_open_counters() works in a thread called thread_func created in function create_tasks, which concurrently creates sched->nr_tasks threads. If the error happens and pr_err prints the error message in each of these threads, the stack size of the perf process (default is 8192 kbytes) will quickly run out and the segmentation fault will happen then. To solve this problem, pr_err with self_open_counters() should be moved from newly created threads to the old main thread of the perf process. Then the pr_err can work in a stable situation without the strange segmentation fault problem. Example: Test environment: x86_64 with 160 cores Before this patch: $ perf sched replay ... task 1549 ( :163132: 163132), nr_events: 1 task 1550 ( :163540: 163540), nr_events: 1 task 1551 ( <unknown>: 0), nr_events: 10 Segmentation fault After this patch: $ perf sched replay ... task 1549 ( :163132: 163132), nr_events: 1 task 1550 ( :163540: 163540), nr_events: 1 task 1551 ( <unknown>: 0), nr_events: 10 ... As shown above, the result continues without any segmentation fault. Signed-off-by: Yunlong Song <yunlong.song@huawei.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/r/1427809596-29559-6-git-send-email-yunlong.song@huawei.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-03-31 21:46:32 +08:00
int fd = parms->fd;
zfree(&parms);
sprintf(comm2, ":%s", this_task->comm);
prctl(PR_SET_NAME, comm2);
if (fd < 0)
return NULL;
again:
ret = sem_post(&this_task->ready_for_work);
BUG_ON(ret);
ret = pthread_mutex_lock(&sched->start_work_mutex);
BUG_ON(ret);
ret = pthread_mutex_unlock(&sched->start_work_mutex);
BUG_ON(ret);
cpu_usage_0 = get_cpu_usage_nsec_self(fd);
for (i = 0; i < this_task->nr_events; i++) {
this_task->curr_event = i;
perf_sched__process_event(sched, this_task->atoms[i]);
}
cpu_usage_1 = get_cpu_usage_nsec_self(fd);
this_task->cpu_usage = cpu_usage_1 - cpu_usage_0;
ret = sem_post(&this_task->work_done_sem);
BUG_ON(ret);
ret = pthread_mutex_lock(&sched->work_done_wait_mutex);
BUG_ON(ret);
ret = pthread_mutex_unlock(&sched->work_done_wait_mutex);
BUG_ON(ret);
goto again;
}
static void create_tasks(struct perf_sched *sched)
{
struct task_desc *task;
pthread_attr_t attr;
unsigned long i;
int err;
err = pthread_attr_init(&attr);
BUG_ON(err);
err = pthread_attr_setstacksize(&attr,
(size_t) max(16 * 1024, PTHREAD_STACK_MIN));
BUG_ON(err);
err = pthread_mutex_lock(&sched->start_work_mutex);
BUG_ON(err);
err = pthread_mutex_lock(&sched->work_done_wait_mutex);
BUG_ON(err);
for (i = 0; i < sched->nr_tasks; i++) {
struct sched_thread_parms *parms = malloc(sizeof(*parms));
BUG_ON(parms == NULL);
parms->task = task = sched->tasks[i];
parms->sched = sched;
perf sched replay: Fix the EMFILE error caused by the limitation of the maximum open files The soft maximum number of open files for a calling process is 1024, which is defined as INR_OPEN_CUR in include/uapi/linux/fs.h, and the hard maximum number of open files for a calling process is 4096, which is defined as INR_OPEN_MAX in include/uapi/linux/fs.h. Both INR_OPEN_CUR and INR_OPEN_MAX are used to limit the value of RLIMIT_NOFILE in include/asm-generic/resource.h. And the soft maximum number finally decides the limitation of the maximum files which are allowed to be opened. That is to say a process can use at most 1024 file descriptors for its o pened files, or an EMFILE error will happen. This error can be fixed by increasing the soft maximum number, under the constraint that the soft maximum number can not exceed the hard maximum number, or both soft and hard maximum number should be increased simultaneously with privilege. For perf sched replay, it uses sys_perf_event_open to create the file descriptor for each of the tasks in order to handle information of perf events. That is to say each task needs a unique file descriptor. In x86_64, there may be over 1024 or 4096 tasks correspoinding to the record in perf.data, which causes that no enough file descriptors can be used. As a result, EMFILE error happens and stops the replay process. To solve this problem, we adaptively increase the soft and hard maximum number of open files with a '-f' option. Example: Test environment: x86_64 with 160 cores $ cat /proc/sys/kernel/pid_max 163840 $ cat /proc/sys/fs/file-max 6815744 $ ulimit -Sn 1024 $ ulimit -Hn 4096 Before this patch: $ perf sched replay ... task 1549 ( :163132: 163132), nr_events: 1 task 1550 ( :163540: 163540), nr_events: 1 task 1551 ( <unknown>: 0), nr_events: 10 Error: sys_perf_event_open() syscall returned with -1 (Too many open files) After this patch: $ perf sched replay ... task 1549 ( :163132: 163132), nr_events: 1 task 1550 ( :163540: 163540), nr_events: 1 task 1551 ( <unknown>: 0), nr_events: 10 Error: sys_perf_event_open() syscall returned with -1 (Too many open files) Have a try with -f option $ perf sched replay -f ... task 1549 ( :163132: 163132), nr_events: 1 task 1550 ( :163540: 163540), nr_events: 1 task 1551 ( <unknown>: 0), nr_events: 10 ------------------------------------------------------------ #1 : 54.401, ravg: 54.40, cpu: 3285.21 / 3285.21 #2 : 199.548, ravg: 68.92, cpu: 4999.65 / 3456.66 #3 : 170.483, ravg: 79.07, cpu: 1349.94 / 3245.99 #4 : 192.034, ravg: 90.37, cpu: 1322.88 / 3053.67 #5 : 182.929, ravg: 99.62, cpu: 1406.51 / 2888.96 #6 : 152.974, ravg: 104.96, cpu: 1167.54 / 2716.82 #7 : 155.579, ravg: 110.02, cpu: 2992.53 / 2744.39 #8 : 130.557, ravg: 112.08, cpu: 1126.43 / 2582.59 #9 : 138.520, ravg: 114.72, cpu: 1253.22 / 2449.65 #10 : 134.328, ravg: 116.68, cpu: 1587.95 / 2363.48 Signed-off-by: Yunlong Song <yunlong.song@huawei.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/r/1427809596-29559-8-git-send-email-yunlong.song@huawei.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-03-31 21:46:34 +08:00
parms->fd = self_open_counters(sched, i);
sem_init(&task->sleep_sem, 0, 0);
sem_init(&task->ready_for_work, 0, 0);
sem_init(&task->work_done_sem, 0, 0);
task->curr_event = 0;
err = pthread_create(&task->thread, &attr, thread_func, parms);
BUG_ON(err);
}
}
static void wait_for_tasks(struct perf_sched *sched)
{
u64 cpu_usage_0, cpu_usage_1;
struct task_desc *task;
unsigned long i, ret;
sched->start_time = get_nsecs();
sched->cpu_usage = 0;
pthread_mutex_unlock(&sched->work_done_wait_mutex);
for (i = 0; i < sched->nr_tasks; i++) {
task = sched->tasks[i];
ret = sem_wait(&task->ready_for_work);
BUG_ON(ret);
sem_init(&task->ready_for_work, 0, 0);
}
ret = pthread_mutex_lock(&sched->work_done_wait_mutex);
BUG_ON(ret);
cpu_usage_0 = get_cpu_usage_nsec_parent();
pthread_mutex_unlock(&sched->start_work_mutex);
for (i = 0; i < sched->nr_tasks; i++) {
task = sched->tasks[i];
ret = sem_wait(&task->work_done_sem);
BUG_ON(ret);
sem_init(&task->work_done_sem, 0, 0);
sched->cpu_usage += task->cpu_usage;
task->cpu_usage = 0;
}
cpu_usage_1 = get_cpu_usage_nsec_parent();
if (!sched->runavg_cpu_usage)
sched->runavg_cpu_usage = sched->cpu_usage;
sched->runavg_cpu_usage = (sched->runavg_cpu_usage * (sched->replay_repeat - 1) + sched->cpu_usage) / sched->replay_repeat;
sched->parent_cpu_usage = cpu_usage_1 - cpu_usage_0;
if (!sched->runavg_parent_cpu_usage)
sched->runavg_parent_cpu_usage = sched->parent_cpu_usage;
sched->runavg_parent_cpu_usage = (sched->runavg_parent_cpu_usage * (sched->replay_repeat - 1) +
sched->parent_cpu_usage)/sched->replay_repeat;
ret = pthread_mutex_lock(&sched->start_work_mutex);
BUG_ON(ret);
for (i = 0; i < sched->nr_tasks; i++) {
task = sched->tasks[i];
sem_init(&task->sleep_sem, 0, 0);
task->curr_event = 0;
}
}
static void run_one_test(struct perf_sched *sched)
{
u64 T0, T1, delta, avg_delta, fluct;
T0 = get_nsecs();
wait_for_tasks(sched);
T1 = get_nsecs();
delta = T1 - T0;
sched->sum_runtime += delta;
sched->nr_runs++;
avg_delta = sched->sum_runtime / sched->nr_runs;
if (delta < avg_delta)
fluct = avg_delta - delta;
else
fluct = delta - avg_delta;
sched->sum_fluct += fluct;
if (!sched->run_avg)
sched->run_avg = delta;
sched->run_avg = (sched->run_avg * (sched->replay_repeat - 1) + delta) / sched->replay_repeat;
printf("#%-3ld: %0.3f, ", sched->nr_runs, (double)delta / NSEC_PER_MSEC);
printf("ravg: %0.2f, ", (double)sched->run_avg / NSEC_PER_MSEC);
printf("cpu: %0.2f / %0.2f",
(double)sched->cpu_usage / NSEC_PER_MSEC, (double)sched->runavg_cpu_usage / NSEC_PER_MSEC);
#if 0
/*
perf sched: Implement the scheduling workload replay engine Integrate the schedbench.c bits with the raw trace events that we get from the perf machinery, and activate the workload replayer/simulator. Example of a captured 'make -j' workload: $ perf sched run measurement overhead: 90 nsecs sleep measurement overhead: 2724743 nsecs the run test took 1000081 nsecs the sleep test took 2981111 nsecs version = 0.5 ... nr_run_events: 70 nr_sleep_events: 66 nr_wakeup_events: 9 target-less wakeups: 71 multi-target wakeups: 47 run events optimized: 139 task 0 ( perf: 6607), nr_events: 2 task 1 ( perf: 6608), nr_events: 6 task 2 ( : 0), nr_events: 1 task 3 ( make: 6609), nr_events: 5 task 4 ( sh: 6610), nr_events: 4 task 5 ( make: 6611), nr_events: 6 task 6 ( sh: 6612), nr_events: 4 task 7 ( make: 6613), nr_events: 5 task 8 ( migration/11: 25), nr_events: 1 task 9 ( migration/13: 29), nr_events: 1 task 10 ( migration/15: 33), nr_events: 1 task 11 ( migration/9: 21), nr_events: 1 task 12 ( sh: 6614), nr_events: 4 task 13 ( make: 6615), nr_events: 5 task 14 ( sh: 6616), nr_events: 4 task 15 ( make: 6617), nr_events: 7 task 16 ( migration/3: 9), nr_events: 1 task 17 ( migration/5: 13), nr_events: 1 task 18 ( migration/7: 17), nr_events: 1 task 19 ( migration/1: 5), nr_events: 1 task 20 ( sh: 6618), nr_events: 4 task 21 ( make: 6619), nr_events: 5 task 22 ( sh: 6620), nr_events: 4 task 23 ( make: 6621), nr_events: 10 task 24 ( sh: 6623), nr_events: 3 task 25 ( gcc: 6624), nr_events: 4 task 26 ( gcc: 6625), nr_events: 4 task 27 ( gcc: 6626), nr_events: 5 task 28 ( collect2: 6627), nr_events: 5 task 29 ( sh: 6622), nr_events: 1 task 30 ( make: 6628), nr_events: 7 task 31 ( sh: 6630), nr_events: 4 task 32 ( gcc: 6631), nr_events: 4 task 33 ( sh: 6629), nr_events: 1 task 34 ( gcc: 6632), nr_events: 4 task 35 ( gcc: 6633), nr_events: 4 task 36 ( collect2: 6634), nr_events: 4 task 37 ( make: 6635), nr_events: 8 task 38 ( sh: 6637), nr_events: 4 task 39 ( sh: 6636), nr_events: 1 task 40 ( gcc: 6638), nr_events: 4 task 41 ( gcc: 6639), nr_events: 4 task 42 ( gcc: 6640), nr_events: 4 task 43 ( collect2: 6641), nr_events: 4 task 44 ( make: 6642), nr_events: 6 task 45 ( sh: 6643), nr_events: 5 task 46 ( sh: 6644), nr_events: 3 task 47 ( sh: 6645), nr_events: 4 task 48 ( make: 6646), nr_events: 6 task 49 ( sh: 6647), nr_events: 3 task 50 ( make: 6648), nr_events: 5 task 51 ( sh: 6649), nr_events: 5 task 52 ( sh: 6650), nr_events: 6 task 53 ( make: 6651), nr_events: 4 task 54 ( make: 6652), nr_events: 5 task 55 ( make: 6653), nr_events: 4 task 56 ( make: 6654), nr_events: 4 task 57 ( make: 6655), nr_events: 5 task 58 ( sh: 6656), nr_events: 4 task 59 ( gcc: 6657), nr_events: 9 task 60 ( ksoftirqd/3: 10), nr_events: 1 task 61 ( gcc: 6658), nr_events: 4 task 62 ( make: 6659), nr_events: 5 task 63 ( sh: 6660), nr_events: 3 task 64 ( gcc: 6661), nr_events: 5 task 65 ( collect2: 6662), nr_events: 4 ------------------------------------------------------------ #1 : 256.745, ravg: 256.74, cpu: 0.00 / 0.00 #2 : 439.372, ravg: 275.01, cpu: 0.00 / 0.00 #3 : 411.971, ravg: 288.70, cpu: 0.00 / 0.00 #4 : 385.500, ravg: 298.38, cpu: 0.00 / 0.00 #5 : 366.526, ravg: 305.20, cpu: 0.00 / 0.00 #6 : 381.281, ravg: 312.81, cpu: 0.00 / 0.00 #7 : 410.756, ravg: 322.60, cpu: 0.00 / 0.00 #8 : 368.009, ravg: 327.14, cpu: 0.00 / 0.00 #9 : 408.098, ravg: 335.24, cpu: 0.00 / 0.00 #10 : 368.582, ravg: 338.57, cpu: 0.00 / 0.00 I.e. we successfully analyzed the trace, replayed it via real threads and measured the replayed workload's scheduling properties. This is how it looked like in 'top' output: PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 7164 mingo 20 0 1434m 8080 888 R 57.0 0.1 0:02.04 :perf 7165 mingo 20 0 1434m 8080 888 R 41.8 0.1 0:01.52 :perf 7228 mingo 20 0 1434m 8080 888 R 39.8 0.1 0:01.44 :gcc 7225 mingo 20 0 1434m 8080 888 R 33.8 0.1 0:01.26 :gcc 7202 mingo 20 0 1434m 8080 888 R 31.2 0.1 0:01.16 :sh 7222 mingo 20 0 1434m 8080 888 R 25.2 0.1 0:00.96 :sh 7211 mingo 20 0 1434m 8080 888 R 21.9 0.1 0:00.82 :sh 7213 mingo 20 0 1434m 8080 888 D 19.2 0.1 0:00.74 :sh 7194 mingo 20 0 1434m 8080 888 D 18.6 0.1 0:00.72 :make There's still various kinks in it - more patches to come. Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-11 18:12:54 +08:00
* rusage statistics done by the parent, these are less
* accurate than the sched->sum_exec_runtime based statistics:
perf sched: Implement the scheduling workload replay engine Integrate the schedbench.c bits with the raw trace events that we get from the perf machinery, and activate the workload replayer/simulator. Example of a captured 'make -j' workload: $ perf sched run measurement overhead: 90 nsecs sleep measurement overhead: 2724743 nsecs the run test took 1000081 nsecs the sleep test took 2981111 nsecs version = 0.5 ... nr_run_events: 70 nr_sleep_events: 66 nr_wakeup_events: 9 target-less wakeups: 71 multi-target wakeups: 47 run events optimized: 139 task 0 ( perf: 6607), nr_events: 2 task 1 ( perf: 6608), nr_events: 6 task 2 ( : 0), nr_events: 1 task 3 ( make: 6609), nr_events: 5 task 4 ( sh: 6610), nr_events: 4 task 5 ( make: 6611), nr_events: 6 task 6 ( sh: 6612), nr_events: 4 task 7 ( make: 6613), nr_events: 5 task 8 ( migration/11: 25), nr_events: 1 task 9 ( migration/13: 29), nr_events: 1 task 10 ( migration/15: 33), nr_events: 1 task 11 ( migration/9: 21), nr_events: 1 task 12 ( sh: 6614), nr_events: 4 task 13 ( make: 6615), nr_events: 5 task 14 ( sh: 6616), nr_events: 4 task 15 ( make: 6617), nr_events: 7 task 16 ( migration/3: 9), nr_events: 1 task 17 ( migration/5: 13), nr_events: 1 task 18 ( migration/7: 17), nr_events: 1 task 19 ( migration/1: 5), nr_events: 1 task 20 ( sh: 6618), nr_events: 4 task 21 ( make: 6619), nr_events: 5 task 22 ( sh: 6620), nr_events: 4 task 23 ( make: 6621), nr_events: 10 task 24 ( sh: 6623), nr_events: 3 task 25 ( gcc: 6624), nr_events: 4 task 26 ( gcc: 6625), nr_events: 4 task 27 ( gcc: 6626), nr_events: 5 task 28 ( collect2: 6627), nr_events: 5 task 29 ( sh: 6622), nr_events: 1 task 30 ( make: 6628), nr_events: 7 task 31 ( sh: 6630), nr_events: 4 task 32 ( gcc: 6631), nr_events: 4 task 33 ( sh: 6629), nr_events: 1 task 34 ( gcc: 6632), nr_events: 4 task 35 ( gcc: 6633), nr_events: 4 task 36 ( collect2: 6634), nr_events: 4 task 37 ( make: 6635), nr_events: 8 task 38 ( sh: 6637), nr_events: 4 task 39 ( sh: 6636), nr_events: 1 task 40 ( gcc: 6638), nr_events: 4 task 41 ( gcc: 6639), nr_events: 4 task 42 ( gcc: 6640), nr_events: 4 task 43 ( collect2: 6641), nr_events: 4 task 44 ( make: 6642), nr_events: 6 task 45 ( sh: 6643), nr_events: 5 task 46 ( sh: 6644), nr_events: 3 task 47 ( sh: 6645), nr_events: 4 task 48 ( make: 6646), nr_events: 6 task 49 ( sh: 6647), nr_events: 3 task 50 ( make: 6648), nr_events: 5 task 51 ( sh: 6649), nr_events: 5 task 52 ( sh: 6650), nr_events: 6 task 53 ( make: 6651), nr_events: 4 task 54 ( make: 6652), nr_events: 5 task 55 ( make: 6653), nr_events: 4 task 56 ( make: 6654), nr_events: 4 task 57 ( make: 6655), nr_events: 5 task 58 ( sh: 6656), nr_events: 4 task 59 ( gcc: 6657), nr_events: 9 task 60 ( ksoftirqd/3: 10), nr_events: 1 task 61 ( gcc: 6658), nr_events: 4 task 62 ( make: 6659), nr_events: 5 task 63 ( sh: 6660), nr_events: 3 task 64 ( gcc: 6661), nr_events: 5 task 65 ( collect2: 6662), nr_events: 4 ------------------------------------------------------------ #1 : 256.745, ravg: 256.74, cpu: 0.00 / 0.00 #2 : 439.372, ravg: 275.01, cpu: 0.00 / 0.00 #3 : 411.971, ravg: 288.70, cpu: 0.00 / 0.00 #4 : 385.500, ravg: 298.38, cpu: 0.00 / 0.00 #5 : 366.526, ravg: 305.20, cpu: 0.00 / 0.00 #6 : 381.281, ravg: 312.81, cpu: 0.00 / 0.00 #7 : 410.756, ravg: 322.60, cpu: 0.00 / 0.00 #8 : 368.009, ravg: 327.14, cpu: 0.00 / 0.00 #9 : 408.098, ravg: 335.24, cpu: 0.00 / 0.00 #10 : 368.582, ravg: 338.57, cpu: 0.00 / 0.00 I.e. we successfully analyzed the trace, replayed it via real threads and measured the replayed workload's scheduling properties. This is how it looked like in 'top' output: PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 7164 mingo 20 0 1434m 8080 888 R 57.0 0.1 0:02.04 :perf 7165 mingo 20 0 1434m 8080 888 R 41.8 0.1 0:01.52 :perf 7228 mingo 20 0 1434m 8080 888 R 39.8 0.1 0:01.44 :gcc 7225 mingo 20 0 1434m 8080 888 R 33.8 0.1 0:01.26 :gcc 7202 mingo 20 0 1434m 8080 888 R 31.2 0.1 0:01.16 :sh 7222 mingo 20 0 1434m 8080 888 R 25.2 0.1 0:00.96 :sh 7211 mingo 20 0 1434m 8080 888 R 21.9 0.1 0:00.82 :sh 7213 mingo 20 0 1434m 8080 888 D 19.2 0.1 0:00.74 :sh 7194 mingo 20 0 1434m 8080 888 D 18.6 0.1 0:00.72 :make There's still various kinks in it - more patches to come. Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-11 18:12:54 +08:00
*/
printf(" [%0.2f / %0.2f]",
(double)sched->parent_cpu_usage / NSEC_PER_MSEC,
(double)sched->runavg_parent_cpu_usage / NSEC_PER_MSEC);
#endif
printf("\n");
if (sched->nr_sleep_corrections)
printf(" (%ld sleep corrections)\n", sched->nr_sleep_corrections);
sched->nr_sleep_corrections = 0;
}
static void test_calibrations(struct perf_sched *sched)
{
u64 T0, T1;
T0 = get_nsecs();
burn_nsecs(sched, NSEC_PER_MSEC);
T1 = get_nsecs();
printf("the run test took %" PRIu64 " nsecs\n", T1 - T0);
T0 = get_nsecs();
sleep_nsecs(NSEC_PER_MSEC);
T1 = get_nsecs();
printf("the sleep test took %" PRIu64 " nsecs\n", T1 - T0);
}
static int
replay_wakeup_event(struct perf_sched *sched,
struct evsel *evsel, struct perf_sample *sample,
perf sched: Don't read all tracepoint variables in advance Do it just at the actual consumer of these fields, that way we avoid needless lookups: [root@sandy ~]# perf sched record sleep 30s [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 8.585 MB perf.data (~375063 samples) ] Before: [root@sandy ~]# perf stat -r 10 perf sched lat > /dev/null Performance counter stats for 'perf sched lat' (10 runs): 103.592215 task-clock # 0.993 CPUs utilized ( +- 0.33% ) 12 context-switches # 0.114 K/sec ( +- 3.29% ) 0 cpu-migrations # 0.000 K/sec 7,605 page-faults # 0.073 M/sec ( +- 0.00% ) 345,796,112 cycles # 3.338 GHz ( +- 0.07% ) [82.90%] 106,876,796 stalled-cycles-frontend # 30.91% frontend cycles idle ( +- 0.38% ) [83.23%] 62,060,877 stalled-cycles-backend # 17.95% backend cycles idle ( +- 0.80% ) [67.14%] 628,246,586 instructions # 1.82 insns per cycle # 0.17 stalled cycles per insn ( +- 0.04% ) [83.64%] 134,962,057 branches # 1302.820 M/sec ( +- 0.10% ) [83.64%] 1,233,037 branch-misses # 0.91% of all branches ( +- 0.29% ) [83.41%] 0.104333272 seconds time elapsed ( +- 0.33% ) [root@sandy ~]# perf stat -r 10 perf sched lat > /dev/null Performance counter stats for 'perf sched lat' (10 runs): 98.848272 task-clock # 0.993 CPUs utilized ( +- 0.48% ) 11 context-switches # 0.112 K/sec ( +- 2.83% ) 0 cpu-migrations # 0.003 K/sec ( +- 50.92% ) 7,604 page-faults # 0.077 M/sec ( +- 0.00% ) 332,216,085 cycles # 3.361 GHz ( +- 0.14% ) [82.87%] 100,623,710 stalled-cycles-frontend # 30.29% frontend cycles idle ( +- 0.53% ) [82.95%] 58,788,692 stalled-cycles-backend # 17.70% backend cycles idle ( +- 0.59% ) [67.15%] 609,402,433 instructions # 1.83 insns per cycle # 0.17 stalled cycles per insn ( +- 0.04% ) [83.76%] 131,277,138 branches # 1328.067 M/sec ( +- 0.06% ) [83.77%] 1,117,871 branch-misses # 0.85% of all branches ( +- 0.32% ) [83.51%] 0.099580430 seconds time elapsed ( +- 0.48% ) [root@sandy ~]# Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Namhyung Kim <namhyung@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-kracdpw8wqlr0xjh75uk8g11@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-09-12 06:29:17 +08:00
struct machine *machine __maybe_unused)
{
perf sched: Don't read all tracepoint variables in advance Do it just at the actual consumer of these fields, that way we avoid needless lookups: [root@sandy ~]# perf sched record sleep 30s [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 8.585 MB perf.data (~375063 samples) ] Before: [root@sandy ~]# perf stat -r 10 perf sched lat > /dev/null Performance counter stats for 'perf sched lat' (10 runs): 103.592215 task-clock # 0.993 CPUs utilized ( +- 0.33% ) 12 context-switches # 0.114 K/sec ( +- 3.29% ) 0 cpu-migrations # 0.000 K/sec 7,605 page-faults # 0.073 M/sec ( +- 0.00% ) 345,796,112 cycles # 3.338 GHz ( +- 0.07% ) [82.90%] 106,876,796 stalled-cycles-frontend # 30.91% frontend cycles idle ( +- 0.38% ) [83.23%] 62,060,877 stalled-cycles-backend # 17.95% backend cycles idle ( +- 0.80% ) [67.14%] 628,246,586 instructions # 1.82 insns per cycle # 0.17 stalled cycles per insn ( +- 0.04% ) [83.64%] 134,962,057 branches # 1302.820 M/sec ( +- 0.10% ) [83.64%] 1,233,037 branch-misses # 0.91% of all branches ( +- 0.29% ) [83.41%] 0.104333272 seconds time elapsed ( +- 0.33% ) [root@sandy ~]# perf stat -r 10 perf sched lat > /dev/null Performance counter stats for 'perf sched lat' (10 runs): 98.848272 task-clock # 0.993 CPUs utilized ( +- 0.48% ) 11 context-switches # 0.112 K/sec ( +- 2.83% ) 0 cpu-migrations # 0.003 K/sec ( +- 50.92% ) 7,604 page-faults # 0.077 M/sec ( +- 0.00% ) 332,216,085 cycles # 3.361 GHz ( +- 0.14% ) [82.87%] 100,623,710 stalled-cycles-frontend # 30.29% frontend cycles idle ( +- 0.53% ) [82.95%] 58,788,692 stalled-cycles-backend # 17.70% backend cycles idle ( +- 0.59% ) [67.15%] 609,402,433 instructions # 1.83 insns per cycle # 0.17 stalled cycles per insn ( +- 0.04% ) [83.76%] 131,277,138 branches # 1328.067 M/sec ( +- 0.06% ) [83.77%] 1,117,871 branch-misses # 0.85% of all branches ( +- 0.32% ) [83.51%] 0.099580430 seconds time elapsed ( +- 0.48% ) [root@sandy ~]# Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Namhyung Kim <namhyung@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-kracdpw8wqlr0xjh75uk8g11@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-09-12 06:29:17 +08:00
const char *comm = perf_evsel__strval(evsel, sample, "comm");
const u32 pid = perf_evsel__intval(evsel, sample, "pid");
struct task_desc *waker, *wakee;
perf sched: Implement the scheduling workload replay engine Integrate the schedbench.c bits with the raw trace events that we get from the perf machinery, and activate the workload replayer/simulator. Example of a captured 'make -j' workload: $ perf sched run measurement overhead: 90 nsecs sleep measurement overhead: 2724743 nsecs the run test took 1000081 nsecs the sleep test took 2981111 nsecs version = 0.5 ... nr_run_events: 70 nr_sleep_events: 66 nr_wakeup_events: 9 target-less wakeups: 71 multi-target wakeups: 47 run events optimized: 139 task 0 ( perf: 6607), nr_events: 2 task 1 ( perf: 6608), nr_events: 6 task 2 ( : 0), nr_events: 1 task 3 ( make: 6609), nr_events: 5 task 4 ( sh: 6610), nr_events: 4 task 5 ( make: 6611), nr_events: 6 task 6 ( sh: 6612), nr_events: 4 task 7 ( make: 6613), nr_events: 5 task 8 ( migration/11: 25), nr_events: 1 task 9 ( migration/13: 29), nr_events: 1 task 10 ( migration/15: 33), nr_events: 1 task 11 ( migration/9: 21), nr_events: 1 task 12 ( sh: 6614), nr_events: 4 task 13 ( make: 6615), nr_events: 5 task 14 ( sh: 6616), nr_events: 4 task 15 ( make: 6617), nr_events: 7 task 16 ( migration/3: 9), nr_events: 1 task 17 ( migration/5: 13), nr_events: 1 task 18 ( migration/7: 17), nr_events: 1 task 19 ( migration/1: 5), nr_events: 1 task 20 ( sh: 6618), nr_events: 4 task 21 ( make: 6619), nr_events: 5 task 22 ( sh: 6620), nr_events: 4 task 23 ( make: 6621), nr_events: 10 task 24 ( sh: 6623), nr_events: 3 task 25 ( gcc: 6624), nr_events: 4 task 26 ( gcc: 6625), nr_events: 4 task 27 ( gcc: 6626), nr_events: 5 task 28 ( collect2: 6627), nr_events: 5 task 29 ( sh: 6622), nr_events: 1 task 30 ( make: 6628), nr_events: 7 task 31 ( sh: 6630), nr_events: 4 task 32 ( gcc: 6631), nr_events: 4 task 33 ( sh: 6629), nr_events: 1 task 34 ( gcc: 6632), nr_events: 4 task 35 ( gcc: 6633), nr_events: 4 task 36 ( collect2: 6634), nr_events: 4 task 37 ( make: 6635), nr_events: 8 task 38 ( sh: 6637), nr_events: 4 task 39 ( sh: 6636), nr_events: 1 task 40 ( gcc: 6638), nr_events: 4 task 41 ( gcc: 6639), nr_events: 4 task 42 ( gcc: 6640), nr_events: 4 task 43 ( collect2: 6641), nr_events: 4 task 44 ( make: 6642), nr_events: 6 task 45 ( sh: 6643), nr_events: 5 task 46 ( sh: 6644), nr_events: 3 task 47 ( sh: 6645), nr_events: 4 task 48 ( make: 6646), nr_events: 6 task 49 ( sh: 6647), nr_events: 3 task 50 ( make: 6648), nr_events: 5 task 51 ( sh: 6649), nr_events: 5 task 52 ( sh: 6650), nr_events: 6 task 53 ( make: 6651), nr_events: 4 task 54 ( make: 6652), nr_events: 5 task 55 ( make: 6653), nr_events: 4 task 56 ( make: 6654), nr_events: 4 task 57 ( make: 6655), nr_events: 5 task 58 ( sh: 6656), nr_events: 4 task 59 ( gcc: 6657), nr_events: 9 task 60 ( ksoftirqd/3: 10), nr_events: 1 task 61 ( gcc: 6658), nr_events: 4 task 62 ( make: 6659), nr_events: 5 task 63 ( sh: 6660), nr_events: 3 task 64 ( gcc: 6661), nr_events: 5 task 65 ( collect2: 6662), nr_events: 4 ------------------------------------------------------------ #1 : 256.745, ravg: 256.74, cpu: 0.00 / 0.00 #2 : 439.372, ravg: 275.01, cpu: 0.00 / 0.00 #3 : 411.971, ravg: 288.70, cpu: 0.00 / 0.00 #4 : 385.500, ravg: 298.38, cpu: 0.00 / 0.00 #5 : 366.526, ravg: 305.20, cpu: 0.00 / 0.00 #6 : 381.281, ravg: 312.81, cpu: 0.00 / 0.00 #7 : 410.756, ravg: 322.60, cpu: 0.00 / 0.00 #8 : 368.009, ravg: 327.14, cpu: 0.00 / 0.00 #9 : 408.098, ravg: 335.24, cpu: 0.00 / 0.00 #10 : 368.582, ravg: 338.57, cpu: 0.00 / 0.00 I.e. we successfully analyzed the trace, replayed it via real threads and measured the replayed workload's scheduling properties. This is how it looked like in 'top' output: PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 7164 mingo 20 0 1434m 8080 888 R 57.0 0.1 0:02.04 :perf 7165 mingo 20 0 1434m 8080 888 R 41.8 0.1 0:01.52 :perf 7228 mingo 20 0 1434m 8080 888 R 39.8 0.1 0:01.44 :gcc 7225 mingo 20 0 1434m 8080 888 R 33.8 0.1 0:01.26 :gcc 7202 mingo 20 0 1434m 8080 888 R 31.2 0.1 0:01.16 :sh 7222 mingo 20 0 1434m 8080 888 R 25.2 0.1 0:00.96 :sh 7211 mingo 20 0 1434m 8080 888 R 21.9 0.1 0:00.82 :sh 7213 mingo 20 0 1434m 8080 888 D 19.2 0.1 0:00.74 :sh 7194 mingo 20 0 1434m 8080 888 D 18.6 0.1 0:00.72 :make There's still various kinks in it - more patches to come. Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-11 18:12:54 +08:00
if (verbose > 0) {
perf sched: Use perf_evsel__{int,str}val This patch also stops reading the common fields, as they were not being used except for one ->common_pid case that was replaced by sample->tid, i.e. the info is already in the perf_sample struct. Also it only fills the _event structures when there is a handler. [root@sandy ~]# perf sched record sleep 30s [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 8.585 MB perf.data (~375063 samples) ] Before: [root@sandy ~]# perf stat -r 10 perf sched lat > /dev/null Performance counter stats for 'perf sched lat' (10 runs): 129.117838 task-clock # 0.994 CPUs utilized ( +- 0.28% ) 14 context-switches # 0.111 K/sec ( +- 2.10% ) 0 cpu-migrations # 0.002 K/sec ( +- 66.67% ) 7,654 page-faults # 0.059 M/sec ( +- 0.67% ) 438,121,661 cycles # 3.393 GHz ( +- 0.06% ) [83.06%] 150,808,605 stalled-cycles-frontend # 34.42% frontend cycles idle ( +- 0.14% ) [83.10%] 80,748,941 stalled-cycles-backend # 18.43% backend cycles idle ( +- 0.64% ) [66.73%] 758,605,879 instructions # 1.73 insns per cycle # 0.20 stalled cycles per insn ( +- 0.08% ) [83.54%] 162,164,321 branches # 1255.940 M/sec ( +- 0.10% ) [83.70%] 1,609,903 branch-misses # 0.99% of all branches ( +- 0.08% ) [83.62%] 0.129949153 seconds time elapsed ( +- 0.28% ) After: [root@sandy ~]# perf stat -r 10 perf sched lat > /dev/null Performance counter stats for 'perf sched lat' (10 runs): 103.592215 task-clock # 0.993 CPUs utilized ( +- 0.33% ) 12 context-switches # 0.114 K/sec ( +- 3.29% ) 0 cpu-migrations # 0.000 K/sec 7,605 page-faults # 0.073 M/sec ( +- 0.00% ) 345,796,112 cycles # 3.338 GHz ( +- 0.07% ) [82.90%] 106,876,796 stalled-cycles-frontend # 30.91% frontend cycles idle ( +- 0.38% ) [83.23%] 62,060,877 stalled-cycles-backend # 17.95% backend cycles idle ( +- 0.80% ) [67.14%] 628,246,586 instructions # 1.82 insns per cycle # 0.17 stalled cycles per insn ( +- 0.04% ) [83.64%] 134,962,057 branches # 1302.820 M/sec ( +- 0.10% ) [83.64%] 1,233,037 branch-misses # 0.91% of all branches ( +- 0.29% ) [83.41%] 0.104333272 seconds time elapsed ( +- 0.33% ) [root@sandy ~]# Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Namhyung Kim <namhyung@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-weu9t63zkrfrazkn0gxj48xy@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-09-12 06:29:17 +08:00
printf("sched_wakeup event %p\n", evsel);
perf sched: Implement the scheduling workload replay engine Integrate the schedbench.c bits with the raw trace events that we get from the perf machinery, and activate the workload replayer/simulator. Example of a captured 'make -j' workload: $ perf sched run measurement overhead: 90 nsecs sleep measurement overhead: 2724743 nsecs the run test took 1000081 nsecs the sleep test took 2981111 nsecs version = 0.5 ... nr_run_events: 70 nr_sleep_events: 66 nr_wakeup_events: 9 target-less wakeups: 71 multi-target wakeups: 47 run events optimized: 139 task 0 ( perf: 6607), nr_events: 2 task 1 ( perf: 6608), nr_events: 6 task 2 ( : 0), nr_events: 1 task 3 ( make: 6609), nr_events: 5 task 4 ( sh: 6610), nr_events: 4 task 5 ( make: 6611), nr_events: 6 task 6 ( sh: 6612), nr_events: 4 task 7 ( make: 6613), nr_events: 5 task 8 ( migration/11: 25), nr_events: 1 task 9 ( migration/13: 29), nr_events: 1 task 10 ( migration/15: 33), nr_events: 1 task 11 ( migration/9: 21), nr_events: 1 task 12 ( sh: 6614), nr_events: 4 task 13 ( make: 6615), nr_events: 5 task 14 ( sh: 6616), nr_events: 4 task 15 ( make: 6617), nr_events: 7 task 16 ( migration/3: 9), nr_events: 1 task 17 ( migration/5: 13), nr_events: 1 task 18 ( migration/7: 17), nr_events: 1 task 19 ( migration/1: 5), nr_events: 1 task 20 ( sh: 6618), nr_events: 4 task 21 ( make: 6619), nr_events: 5 task 22 ( sh: 6620), nr_events: 4 task 23 ( make: 6621), nr_events: 10 task 24 ( sh: 6623), nr_events: 3 task 25 ( gcc: 6624), nr_events: 4 task 26 ( gcc: 6625), nr_events: 4 task 27 ( gcc: 6626), nr_events: 5 task 28 ( collect2: 6627), nr_events: 5 task 29 ( sh: 6622), nr_events: 1 task 30 ( make: 6628), nr_events: 7 task 31 ( sh: 6630), nr_events: 4 task 32 ( gcc: 6631), nr_events: 4 task 33 ( sh: 6629), nr_events: 1 task 34 ( gcc: 6632), nr_events: 4 task 35 ( gcc: 6633), nr_events: 4 task 36 ( collect2: 6634), nr_events: 4 task 37 ( make: 6635), nr_events: 8 task 38 ( sh: 6637), nr_events: 4 task 39 ( sh: 6636), nr_events: 1 task 40 ( gcc: 6638), nr_events: 4 task 41 ( gcc: 6639), nr_events: 4 task 42 ( gcc: 6640), nr_events: 4 task 43 ( collect2: 6641), nr_events: 4 task 44 ( make: 6642), nr_events: 6 task 45 ( sh: 6643), nr_events: 5 task 46 ( sh: 6644), nr_events: 3 task 47 ( sh: 6645), nr_events: 4 task 48 ( make: 6646), nr_events: 6 task 49 ( sh: 6647), nr_events: 3 task 50 ( make: 6648), nr_events: 5 task 51 ( sh: 6649), nr_events: 5 task 52 ( sh: 6650), nr_events: 6 task 53 ( make: 6651), nr_events: 4 task 54 ( make: 6652), nr_events: 5 task 55 ( make: 6653), nr_events: 4 task 56 ( make: 6654), nr_events: 4 task 57 ( make: 6655), nr_events: 5 task 58 ( sh: 6656), nr_events: 4 task 59 ( gcc: 6657), nr_events: 9 task 60 ( ksoftirqd/3: 10), nr_events: 1 task 61 ( gcc: 6658), nr_events: 4 task 62 ( make: 6659), nr_events: 5 task 63 ( sh: 6660), nr_events: 3 task 64 ( gcc: 6661), nr_events: 5 task 65 ( collect2: 6662), nr_events: 4 ------------------------------------------------------------ #1 : 256.745, ravg: 256.74, cpu: 0.00 / 0.00 #2 : 439.372, ravg: 275.01, cpu: 0.00 / 0.00 #3 : 411.971, ravg: 288.70, cpu: 0.00 / 0.00 #4 : 385.500, ravg: 298.38, cpu: 0.00 / 0.00 #5 : 366.526, ravg: 305.20, cpu: 0.00 / 0.00 #6 : 381.281, ravg: 312.81, cpu: 0.00 / 0.00 #7 : 410.756, ravg: 322.60, cpu: 0.00 / 0.00 #8 : 368.009, ravg: 327.14, cpu: 0.00 / 0.00 #9 : 408.098, ravg: 335.24, cpu: 0.00 / 0.00 #10 : 368.582, ravg: 338.57, cpu: 0.00 / 0.00 I.e. we successfully analyzed the trace, replayed it via real threads and measured the replayed workload's scheduling properties. This is how it looked like in 'top' output: PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 7164 mingo 20 0 1434m 8080 888 R 57.0 0.1 0:02.04 :perf 7165 mingo 20 0 1434m 8080 888 R 41.8 0.1 0:01.52 :perf 7228 mingo 20 0 1434m 8080 888 R 39.8 0.1 0:01.44 :gcc 7225 mingo 20 0 1434m 8080 888 R 33.8 0.1 0:01.26 :gcc 7202 mingo 20 0 1434m 8080 888 R 31.2 0.1 0:01.16 :sh 7222 mingo 20 0 1434m 8080 888 R 25.2 0.1 0:00.96 :sh 7211 mingo 20 0 1434m 8080 888 R 21.9 0.1 0:00.82 :sh 7213 mingo 20 0 1434m 8080 888 D 19.2 0.1 0:00.74 :sh 7194 mingo 20 0 1434m 8080 888 D 18.6 0.1 0:00.72 :make There's still various kinks in it - more patches to come. Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-11 18:12:54 +08:00
perf sched: Don't read all tracepoint variables in advance Do it just at the actual consumer of these fields, that way we avoid needless lookups: [root@sandy ~]# perf sched record sleep 30s [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 8.585 MB perf.data (~375063 samples) ] Before: [root@sandy ~]# perf stat -r 10 perf sched lat > /dev/null Performance counter stats for 'perf sched lat' (10 runs): 103.592215 task-clock # 0.993 CPUs utilized ( +- 0.33% ) 12 context-switches # 0.114 K/sec ( +- 3.29% ) 0 cpu-migrations # 0.000 K/sec 7,605 page-faults # 0.073 M/sec ( +- 0.00% ) 345,796,112 cycles # 3.338 GHz ( +- 0.07% ) [82.90%] 106,876,796 stalled-cycles-frontend # 30.91% frontend cycles idle ( +- 0.38% ) [83.23%] 62,060,877 stalled-cycles-backend # 17.95% backend cycles idle ( +- 0.80% ) [67.14%] 628,246,586 instructions # 1.82 insns per cycle # 0.17 stalled cycles per insn ( +- 0.04% ) [83.64%] 134,962,057 branches # 1302.820 M/sec ( +- 0.10% ) [83.64%] 1,233,037 branch-misses # 0.91% of all branches ( +- 0.29% ) [83.41%] 0.104333272 seconds time elapsed ( +- 0.33% ) [root@sandy ~]# perf stat -r 10 perf sched lat > /dev/null Performance counter stats for 'perf sched lat' (10 runs): 98.848272 task-clock # 0.993 CPUs utilized ( +- 0.48% ) 11 context-switches # 0.112 K/sec ( +- 2.83% ) 0 cpu-migrations # 0.003 K/sec ( +- 50.92% ) 7,604 page-faults # 0.077 M/sec ( +- 0.00% ) 332,216,085 cycles # 3.361 GHz ( +- 0.14% ) [82.87%] 100,623,710 stalled-cycles-frontend # 30.29% frontend cycles idle ( +- 0.53% ) [82.95%] 58,788,692 stalled-cycles-backend # 17.70% backend cycles idle ( +- 0.59% ) [67.15%] 609,402,433 instructions # 1.83 insns per cycle # 0.17 stalled cycles per insn ( +- 0.04% ) [83.76%] 131,277,138 branches # 1328.067 M/sec ( +- 0.06% ) [83.77%] 1,117,871 branch-misses # 0.85% of all branches ( +- 0.32% ) [83.51%] 0.099580430 seconds time elapsed ( +- 0.48% ) [root@sandy ~]# Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Namhyung Kim <namhyung@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-kracdpw8wqlr0xjh75uk8g11@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-09-12 06:29:17 +08:00
printf(" ... pid %d woke up %s/%d\n", sample->tid, comm, pid);
}
perf sched: Implement the scheduling workload replay engine Integrate the schedbench.c bits with the raw trace events that we get from the perf machinery, and activate the workload replayer/simulator. Example of a captured 'make -j' workload: $ perf sched run measurement overhead: 90 nsecs sleep measurement overhead: 2724743 nsecs the run test took 1000081 nsecs the sleep test took 2981111 nsecs version = 0.5 ... nr_run_events: 70 nr_sleep_events: 66 nr_wakeup_events: 9 target-less wakeups: 71 multi-target wakeups: 47 run events optimized: 139 task 0 ( perf: 6607), nr_events: 2 task 1 ( perf: 6608), nr_events: 6 task 2 ( : 0), nr_events: 1 task 3 ( make: 6609), nr_events: 5 task 4 ( sh: 6610), nr_events: 4 task 5 ( make: 6611), nr_events: 6 task 6 ( sh: 6612), nr_events: 4 task 7 ( make: 6613), nr_events: 5 task 8 ( migration/11: 25), nr_events: 1 task 9 ( migration/13: 29), nr_events: 1 task 10 ( migration/15: 33), nr_events: 1 task 11 ( migration/9: 21), nr_events: 1 task 12 ( sh: 6614), nr_events: 4 task 13 ( make: 6615), nr_events: 5 task 14 ( sh: 6616), nr_events: 4 task 15 ( make: 6617), nr_events: 7 task 16 ( migration/3: 9), nr_events: 1 task 17 ( migration/5: 13), nr_events: 1 task 18 ( migration/7: 17), nr_events: 1 task 19 ( migration/1: 5), nr_events: 1 task 20 ( sh: 6618), nr_events: 4 task 21 ( make: 6619), nr_events: 5 task 22 ( sh: 6620), nr_events: 4 task 23 ( make: 6621), nr_events: 10 task 24 ( sh: 6623), nr_events: 3 task 25 ( gcc: 6624), nr_events: 4 task 26 ( gcc: 6625), nr_events: 4 task 27 ( gcc: 6626), nr_events: 5 task 28 ( collect2: 6627), nr_events: 5 task 29 ( sh: 6622), nr_events: 1 task 30 ( make: 6628), nr_events: 7 task 31 ( sh: 6630), nr_events: 4 task 32 ( gcc: 6631), nr_events: 4 task 33 ( sh: 6629), nr_events: 1 task 34 ( gcc: 6632), nr_events: 4 task 35 ( gcc: 6633), nr_events: 4 task 36 ( collect2: 6634), nr_events: 4 task 37 ( make: 6635), nr_events: 8 task 38 ( sh: 6637), nr_events: 4 task 39 ( sh: 6636), nr_events: 1 task 40 ( gcc: 6638), nr_events: 4 task 41 ( gcc: 6639), nr_events: 4 task 42 ( gcc: 6640), nr_events: 4 task 43 ( collect2: 6641), nr_events: 4 task 44 ( make: 6642), nr_events: 6 task 45 ( sh: 6643), nr_events: 5 task 46 ( sh: 6644), nr_events: 3 task 47 ( sh: 6645), nr_events: 4 task 48 ( make: 6646), nr_events: 6 task 49 ( sh: 6647), nr_events: 3 task 50 ( make: 6648), nr_events: 5 task 51 ( sh: 6649), nr_events: 5 task 52 ( sh: 6650), nr_events: 6 task 53 ( make: 6651), nr_events: 4 task 54 ( make: 6652), nr_events: 5 task 55 ( make: 6653), nr_events: 4 task 56 ( make: 6654), nr_events: 4 task 57 ( make: 6655), nr_events: 5 task 58 ( sh: 6656), nr_events: 4 task 59 ( gcc: 6657), nr_events: 9 task 60 ( ksoftirqd/3: 10), nr_events: 1 task 61 ( gcc: 6658), nr_events: 4 task 62 ( make: 6659), nr_events: 5 task 63 ( sh: 6660), nr_events: 3 task 64 ( gcc: 6661), nr_events: 5 task 65 ( collect2: 6662), nr_events: 4 ------------------------------------------------------------ #1 : 256.745, ravg: 256.74, cpu: 0.00 / 0.00 #2 : 439.372, ravg: 275.01, cpu: 0.00 / 0.00 #3 : 411.971, ravg: 288.70, cpu: 0.00 / 0.00 #4 : 385.500, ravg: 298.38, cpu: 0.00 / 0.00 #5 : 366.526, ravg: 305.20, cpu: 0.00 / 0.00 #6 : 381.281, ravg: 312.81, cpu: 0.00 / 0.00 #7 : 410.756, ravg: 322.60, cpu: 0.00 / 0.00 #8 : 368.009, ravg: 327.14, cpu: 0.00 / 0.00 #9 : 408.098, ravg: 335.24, cpu: 0.00 / 0.00 #10 : 368.582, ravg: 338.57, cpu: 0.00 / 0.00 I.e. we successfully analyzed the trace, replayed it via real threads and measured the replayed workload's scheduling properties. This is how it looked like in 'top' output: PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 7164 mingo 20 0 1434m 8080 888 R 57.0 0.1 0:02.04 :perf 7165 mingo 20 0 1434m 8080 888 R 41.8 0.1 0:01.52 :perf 7228 mingo 20 0 1434m 8080 888 R 39.8 0.1 0:01.44 :gcc 7225 mingo 20 0 1434m 8080 888 R 33.8 0.1 0:01.26 :gcc 7202 mingo 20 0 1434m 8080 888 R 31.2 0.1 0:01.16 :sh 7222 mingo 20 0 1434m 8080 888 R 25.2 0.1 0:00.96 :sh 7211 mingo 20 0 1434m 8080 888 R 21.9 0.1 0:00.82 :sh 7213 mingo 20 0 1434m 8080 888 D 19.2 0.1 0:00.74 :sh 7194 mingo 20 0 1434m 8080 888 D 18.6 0.1 0:00.72 :make There's still various kinks in it - more patches to come. Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-11 18:12:54 +08:00
perf sched: Use perf_evsel__{int,str}val This patch also stops reading the common fields, as they were not being used except for one ->common_pid case that was replaced by sample->tid, i.e. the info is already in the perf_sample struct. Also it only fills the _event structures when there is a handler. [root@sandy ~]# perf sched record sleep 30s [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 8.585 MB perf.data (~375063 samples) ] Before: [root@sandy ~]# perf stat -r 10 perf sched lat > /dev/null Performance counter stats for 'perf sched lat' (10 runs): 129.117838 task-clock # 0.994 CPUs utilized ( +- 0.28% ) 14 context-switches # 0.111 K/sec ( +- 2.10% ) 0 cpu-migrations # 0.002 K/sec ( +- 66.67% ) 7,654 page-faults # 0.059 M/sec ( +- 0.67% ) 438,121,661 cycles # 3.393 GHz ( +- 0.06% ) [83.06%] 150,808,605 stalled-cycles-frontend # 34.42% frontend cycles idle ( +- 0.14% ) [83.10%] 80,748,941 stalled-cycles-backend # 18.43% backend cycles idle ( +- 0.64% ) [66.73%] 758,605,879 instructions # 1.73 insns per cycle # 0.20 stalled cycles per insn ( +- 0.08% ) [83.54%] 162,164,321 branches # 1255.940 M/sec ( +- 0.10% ) [83.70%] 1,609,903 branch-misses # 0.99% of all branches ( +- 0.08% ) [83.62%] 0.129949153 seconds time elapsed ( +- 0.28% ) After: [root@sandy ~]# perf stat -r 10 perf sched lat > /dev/null Performance counter stats for 'perf sched lat' (10 runs): 103.592215 task-clock # 0.993 CPUs utilized ( +- 0.33% ) 12 context-switches # 0.114 K/sec ( +- 3.29% ) 0 cpu-migrations # 0.000 K/sec 7,605 page-faults # 0.073 M/sec ( +- 0.00% ) 345,796,112 cycles # 3.338 GHz ( +- 0.07% ) [82.90%] 106,876,796 stalled-cycles-frontend # 30.91% frontend cycles idle ( +- 0.38% ) [83.23%] 62,060,877 stalled-cycles-backend # 17.95% backend cycles idle ( +- 0.80% ) [67.14%] 628,246,586 instructions # 1.82 insns per cycle # 0.17 stalled cycles per insn ( +- 0.04% ) [83.64%] 134,962,057 branches # 1302.820 M/sec ( +- 0.10% ) [83.64%] 1,233,037 branch-misses # 0.91% of all branches ( +- 0.29% ) [83.41%] 0.104333272 seconds time elapsed ( +- 0.33% ) [root@sandy ~]# Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Namhyung Kim <namhyung@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-weu9t63zkrfrazkn0gxj48xy@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-09-12 06:29:17 +08:00
waker = register_pid(sched, sample->tid, "<unknown>");
perf sched: Don't read all tracepoint variables in advance Do it just at the actual consumer of these fields, that way we avoid needless lookups: [root@sandy ~]# perf sched record sleep 30s [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 8.585 MB perf.data (~375063 samples) ] Before: [root@sandy ~]# perf stat -r 10 perf sched lat > /dev/null Performance counter stats for 'perf sched lat' (10 runs): 103.592215 task-clock # 0.993 CPUs utilized ( +- 0.33% ) 12 context-switches # 0.114 K/sec ( +- 3.29% ) 0 cpu-migrations # 0.000 K/sec 7,605 page-faults # 0.073 M/sec ( +- 0.00% ) 345,796,112 cycles # 3.338 GHz ( +- 0.07% ) [82.90%] 106,876,796 stalled-cycles-frontend # 30.91% frontend cycles idle ( +- 0.38% ) [83.23%] 62,060,877 stalled-cycles-backend # 17.95% backend cycles idle ( +- 0.80% ) [67.14%] 628,246,586 instructions # 1.82 insns per cycle # 0.17 stalled cycles per insn ( +- 0.04% ) [83.64%] 134,962,057 branches # 1302.820 M/sec ( +- 0.10% ) [83.64%] 1,233,037 branch-misses # 0.91% of all branches ( +- 0.29% ) [83.41%] 0.104333272 seconds time elapsed ( +- 0.33% ) [root@sandy ~]# perf stat -r 10 perf sched lat > /dev/null Performance counter stats for 'perf sched lat' (10 runs): 98.848272 task-clock # 0.993 CPUs utilized ( +- 0.48% ) 11 context-switches # 0.112 K/sec ( +- 2.83% ) 0 cpu-migrations # 0.003 K/sec ( +- 50.92% ) 7,604 page-faults # 0.077 M/sec ( +- 0.00% ) 332,216,085 cycles # 3.361 GHz ( +- 0.14% ) [82.87%] 100,623,710 stalled-cycles-frontend # 30.29% frontend cycles idle ( +- 0.53% ) [82.95%] 58,788,692 stalled-cycles-backend # 17.70% backend cycles idle ( +- 0.59% ) [67.15%] 609,402,433 instructions # 1.83 insns per cycle # 0.17 stalled cycles per insn ( +- 0.04% ) [83.76%] 131,277,138 branches # 1328.067 M/sec ( +- 0.06% ) [83.77%] 1,117,871 branch-misses # 0.85% of all branches ( +- 0.32% ) [83.51%] 0.099580430 seconds time elapsed ( +- 0.48% ) [root@sandy ~]# Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Namhyung Kim <namhyung@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-kracdpw8wqlr0xjh75uk8g11@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-09-12 06:29:17 +08:00
wakee = register_pid(sched, pid, comm);
perf sched: Implement the scheduling workload replay engine Integrate the schedbench.c bits with the raw trace events that we get from the perf machinery, and activate the workload replayer/simulator. Example of a captured 'make -j' workload: $ perf sched run measurement overhead: 90 nsecs sleep measurement overhead: 2724743 nsecs the run test took 1000081 nsecs the sleep test took 2981111 nsecs version = 0.5 ... nr_run_events: 70 nr_sleep_events: 66 nr_wakeup_events: 9 target-less wakeups: 71 multi-target wakeups: 47 run events optimized: 139 task 0 ( perf: 6607), nr_events: 2 task 1 ( perf: 6608), nr_events: 6 task 2 ( : 0), nr_events: 1 task 3 ( make: 6609), nr_events: 5 task 4 ( sh: 6610), nr_events: 4 task 5 ( make: 6611), nr_events: 6 task 6 ( sh: 6612), nr_events: 4 task 7 ( make: 6613), nr_events: 5 task 8 ( migration/11: 25), nr_events: 1 task 9 ( migration/13: 29), nr_events: 1 task 10 ( migration/15: 33), nr_events: 1 task 11 ( migration/9: 21), nr_events: 1 task 12 ( sh: 6614), nr_events: 4 task 13 ( make: 6615), nr_events: 5 task 14 ( sh: 6616), nr_events: 4 task 15 ( make: 6617), nr_events: 7 task 16 ( migration/3: 9), nr_events: 1 task 17 ( migration/5: 13), nr_events: 1 task 18 ( migration/7: 17), nr_events: 1 task 19 ( migration/1: 5), nr_events: 1 task 20 ( sh: 6618), nr_events: 4 task 21 ( make: 6619), nr_events: 5 task 22 ( sh: 6620), nr_events: 4 task 23 ( make: 6621), nr_events: 10 task 24 ( sh: 6623), nr_events: 3 task 25 ( gcc: 6624), nr_events: 4 task 26 ( gcc: 6625), nr_events: 4 task 27 ( gcc: 6626), nr_events: 5 task 28 ( collect2: 6627), nr_events: 5 task 29 ( sh: 6622), nr_events: 1 task 30 ( make: 6628), nr_events: 7 task 31 ( sh: 6630), nr_events: 4 task 32 ( gcc: 6631), nr_events: 4 task 33 ( sh: 6629), nr_events: 1 task 34 ( gcc: 6632), nr_events: 4 task 35 ( gcc: 6633), nr_events: 4 task 36 ( collect2: 6634), nr_events: 4 task 37 ( make: 6635), nr_events: 8 task 38 ( sh: 6637), nr_events: 4 task 39 ( sh: 6636), nr_events: 1 task 40 ( gcc: 6638), nr_events: 4 task 41 ( gcc: 6639), nr_events: 4 task 42 ( gcc: 6640), nr_events: 4 task 43 ( collect2: 6641), nr_events: 4 task 44 ( make: 6642), nr_events: 6 task 45 ( sh: 6643), nr_events: 5 task 46 ( sh: 6644), nr_events: 3 task 47 ( sh: 6645), nr_events: 4 task 48 ( make: 6646), nr_events: 6 task 49 ( sh: 6647), nr_events: 3 task 50 ( make: 6648), nr_events: 5 task 51 ( sh: 6649), nr_events: 5 task 52 ( sh: 6650), nr_events: 6 task 53 ( make: 6651), nr_events: 4 task 54 ( make: 6652), nr_events: 5 task 55 ( make: 6653), nr_events: 4 task 56 ( make: 6654), nr_events: 4 task 57 ( make: 6655), nr_events: 5 task 58 ( sh: 6656), nr_events: 4 task 59 ( gcc: 6657), nr_events: 9 task 60 ( ksoftirqd/3: 10), nr_events: 1 task 61 ( gcc: 6658), nr_events: 4 task 62 ( make: 6659), nr_events: 5 task 63 ( sh: 6660), nr_events: 3 task 64 ( gcc: 6661), nr_events: 5 task 65 ( collect2: 6662), nr_events: 4 ------------------------------------------------------------ #1 : 256.745, ravg: 256.74, cpu: 0.00 / 0.00 #2 : 439.372, ravg: 275.01, cpu: 0.00 / 0.00 #3 : 411.971, ravg: 288.70, cpu: 0.00 / 0.00 #4 : 385.500, ravg: 298.38, cpu: 0.00 / 0.00 #5 : 366.526, ravg: 305.20, cpu: 0.00 / 0.00 #6 : 381.281, ravg: 312.81, cpu: 0.00 / 0.00 #7 : 410.756, ravg: 322.60, cpu: 0.00 / 0.00 #8 : 368.009, ravg: 327.14, cpu: 0.00 / 0.00 #9 : 408.098, ravg: 335.24, cpu: 0.00 / 0.00 #10 : 368.582, ravg: 338.57, cpu: 0.00 / 0.00 I.e. we successfully analyzed the trace, replayed it via real threads and measured the replayed workload's scheduling properties. This is how it looked like in 'top' output: PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 7164 mingo 20 0 1434m 8080 888 R 57.0 0.1 0:02.04 :perf 7165 mingo 20 0 1434m 8080 888 R 41.8 0.1 0:01.52 :perf 7228 mingo 20 0 1434m 8080 888 R 39.8 0.1 0:01.44 :gcc 7225 mingo 20 0 1434m 8080 888 R 33.8 0.1 0:01.26 :gcc 7202 mingo 20 0 1434m 8080 888 R 31.2 0.1 0:01.16 :sh 7222 mingo 20 0 1434m 8080 888 R 25.2 0.1 0:00.96 :sh 7211 mingo 20 0 1434m 8080 888 R 21.9 0.1 0:00.82 :sh 7213 mingo 20 0 1434m 8080 888 D 19.2 0.1 0:00.74 :sh 7194 mingo 20 0 1434m 8080 888 D 18.6 0.1 0:00.72 :make There's still various kinks in it - more patches to come. Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-11 18:12:54 +08:00
add_sched_event_wakeup(sched, waker, sample->time, wakee);
return 0;
}
perf sched: Don't read all tracepoint variables in advance Do it just at the actual consumer of these fields, that way we avoid needless lookups: [root@sandy ~]# perf sched record sleep 30s [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 8.585 MB perf.data (~375063 samples) ] Before: [root@sandy ~]# perf stat -r 10 perf sched lat > /dev/null Performance counter stats for 'perf sched lat' (10 runs): 103.592215 task-clock # 0.993 CPUs utilized ( +- 0.33% ) 12 context-switches # 0.114 K/sec ( +- 3.29% ) 0 cpu-migrations # 0.000 K/sec 7,605 page-faults # 0.073 M/sec ( +- 0.00% ) 345,796,112 cycles # 3.338 GHz ( +- 0.07% ) [82.90%] 106,876,796 stalled-cycles-frontend # 30.91% frontend cycles idle ( +- 0.38% ) [83.23%] 62,060,877 stalled-cycles-backend # 17.95% backend cycles idle ( +- 0.80% ) [67.14%] 628,246,586 instructions # 1.82 insns per cycle # 0.17 stalled cycles per insn ( +- 0.04% ) [83.64%] 134,962,057 branches # 1302.820 M/sec ( +- 0.10% ) [83.64%] 1,233,037 branch-misses # 0.91% of all branches ( +- 0.29% ) [83.41%] 0.104333272 seconds time elapsed ( +- 0.33% ) [root@sandy ~]# perf stat -r 10 perf sched lat > /dev/null Performance counter stats for 'perf sched lat' (10 runs): 98.848272 task-clock # 0.993 CPUs utilized ( +- 0.48% ) 11 context-switches # 0.112 K/sec ( +- 2.83% ) 0 cpu-migrations # 0.003 K/sec ( +- 50.92% ) 7,604 page-faults # 0.077 M/sec ( +- 0.00% ) 332,216,085 cycles # 3.361 GHz ( +- 0.14% ) [82.87%] 100,623,710 stalled-cycles-frontend # 30.29% frontend cycles idle ( +- 0.53% ) [82.95%] 58,788,692 stalled-cycles-backend # 17.70% backend cycles idle ( +- 0.59% ) [67.15%] 609,402,433 instructions # 1.83 insns per cycle # 0.17 stalled cycles per insn ( +- 0.04% ) [83.76%] 131,277,138 branches # 1328.067 M/sec ( +- 0.06% ) [83.77%] 1,117,871 branch-misses # 0.85% of all branches ( +- 0.32% ) [83.51%] 0.099580430 seconds time elapsed ( +- 0.48% ) [root@sandy ~]# Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Namhyung Kim <namhyung@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-kracdpw8wqlr0xjh75uk8g11@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-09-12 06:29:17 +08:00
static int replay_switch_event(struct perf_sched *sched,
struct evsel *evsel,
perf sched: Don't read all tracepoint variables in advance Do it just at the actual consumer of these fields, that way we avoid needless lookups: [root@sandy ~]# perf sched record sleep 30s [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 8.585 MB perf.data (~375063 samples) ] Before: [root@sandy ~]# perf stat -r 10 perf sched lat > /dev/null Performance counter stats for 'perf sched lat' (10 runs): 103.592215 task-clock # 0.993 CPUs utilized ( +- 0.33% ) 12 context-switches # 0.114 K/sec ( +- 3.29% ) 0 cpu-migrations # 0.000 K/sec 7,605 page-faults # 0.073 M/sec ( +- 0.00% ) 345,796,112 cycles # 3.338 GHz ( +- 0.07% ) [82.90%] 106,876,796 stalled-cycles-frontend # 30.91% frontend cycles idle ( +- 0.38% ) [83.23%] 62,060,877 stalled-cycles-backend # 17.95% backend cycles idle ( +- 0.80% ) [67.14%] 628,246,586 instructions # 1.82 insns per cycle # 0.17 stalled cycles per insn ( +- 0.04% ) [83.64%] 134,962,057 branches # 1302.820 M/sec ( +- 0.10% ) [83.64%] 1,233,037 branch-misses # 0.91% of all branches ( +- 0.29% ) [83.41%] 0.104333272 seconds time elapsed ( +- 0.33% ) [root@sandy ~]# perf stat -r 10 perf sched lat > /dev/null Performance counter stats for 'perf sched lat' (10 runs): 98.848272 task-clock # 0.993 CPUs utilized ( +- 0.48% ) 11 context-switches # 0.112 K/sec ( +- 2.83% ) 0 cpu-migrations # 0.003 K/sec ( +- 50.92% ) 7,604 page-faults # 0.077 M/sec ( +- 0.00% ) 332,216,085 cycles # 3.361 GHz ( +- 0.14% ) [82.87%] 100,623,710 stalled-cycles-frontend # 30.29% frontend cycles idle ( +- 0.53% ) [82.95%] 58,788,692 stalled-cycles-backend # 17.70% backend cycles idle ( +- 0.59% ) [67.15%] 609,402,433 instructions # 1.83 insns per cycle # 0.17 stalled cycles per insn ( +- 0.04% ) [83.76%] 131,277,138 branches # 1328.067 M/sec ( +- 0.06% ) [83.77%] 1,117,871 branch-misses # 0.85% of all branches ( +- 0.32% ) [83.51%] 0.099580430 seconds time elapsed ( +- 0.48% ) [root@sandy ~]# Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Namhyung Kim <namhyung@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-kracdpw8wqlr0xjh75uk8g11@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-09-12 06:29:17 +08:00
struct perf_sample *sample,
struct machine *machine __maybe_unused)
{
perf sched: Don't read all tracepoint variables in advance Do it just at the actual consumer of these fields, that way we avoid needless lookups: [root@sandy ~]# perf sched record sleep 30s [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 8.585 MB perf.data (~375063 samples) ] Before: [root@sandy ~]# perf stat -r 10 perf sched lat > /dev/null Performance counter stats for 'perf sched lat' (10 runs): 103.592215 task-clock # 0.993 CPUs utilized ( +- 0.33% ) 12 context-switches # 0.114 K/sec ( +- 3.29% ) 0 cpu-migrations # 0.000 K/sec 7,605 page-faults # 0.073 M/sec ( +- 0.00% ) 345,796,112 cycles # 3.338 GHz ( +- 0.07% ) [82.90%] 106,876,796 stalled-cycles-frontend # 30.91% frontend cycles idle ( +- 0.38% ) [83.23%] 62,060,877 stalled-cycles-backend # 17.95% backend cycles idle ( +- 0.80% ) [67.14%] 628,246,586 instructions # 1.82 insns per cycle # 0.17 stalled cycles per insn ( +- 0.04% ) [83.64%] 134,962,057 branches # 1302.820 M/sec ( +- 0.10% ) [83.64%] 1,233,037 branch-misses # 0.91% of all branches ( +- 0.29% ) [83.41%] 0.104333272 seconds time elapsed ( +- 0.33% ) [root@sandy ~]# perf stat -r 10 perf sched lat > /dev/null Performance counter stats for 'perf sched lat' (10 runs): 98.848272 task-clock # 0.993 CPUs utilized ( +- 0.48% ) 11 context-switches # 0.112 K/sec ( +- 2.83% ) 0 cpu-migrations # 0.003 K/sec ( +- 50.92% ) 7,604 page-faults # 0.077 M/sec ( +- 0.00% ) 332,216,085 cycles # 3.361 GHz ( +- 0.14% ) [82.87%] 100,623,710 stalled-cycles-frontend # 30.29% frontend cycles idle ( +- 0.53% ) [82.95%] 58,788,692 stalled-cycles-backend # 17.70% backend cycles idle ( +- 0.59% ) [67.15%] 609,402,433 instructions # 1.83 insns per cycle # 0.17 stalled cycles per insn ( +- 0.04% ) [83.76%] 131,277,138 branches # 1328.067 M/sec ( +- 0.06% ) [83.77%] 1,117,871 branch-misses # 0.85% of all branches ( +- 0.32% ) [83.51%] 0.099580430 seconds time elapsed ( +- 0.48% ) [root@sandy ~]# Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Namhyung Kim <namhyung@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-kracdpw8wqlr0xjh75uk8g11@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-09-12 06:29:17 +08:00
const char *prev_comm = perf_evsel__strval(evsel, sample, "prev_comm"),
*next_comm = perf_evsel__strval(evsel, sample, "next_comm");
const u32 prev_pid = perf_evsel__intval(evsel, sample, "prev_pid"),
next_pid = perf_evsel__intval(evsel, sample, "next_pid");
const u64 prev_state = perf_evsel__intval(evsel, sample, "prev_state");
perf tools: Use __maybe_used for unused variables perf defines both __used and __unused variables to use for marking unused variables. The variable __used is defined to __attribute__((__unused__)), which contradicts the kernel definition to __attribute__((__used__)) for new gcc versions. On Android, __used is also defined in system headers and this leads to warnings like: warning: '__used__' attribute ignored __unused is not defined in the kernel and is not a standard definition. If __unused is included everywhere instead of __used, this leads to conflicts with glibc headers, since glibc has a variables with this name in its headers. The best approach is to use __maybe_unused, the definition used in the kernel for __attribute__((unused)). In this way there is only one definition in perf sources (instead of 2 definitions that point to the same thing: __used and __unused) and it works on both Linux and Android. This patch simply replaces all instances of __used and __unused with __maybe_unused. Signed-off-by: Irina Tirdea <irina.tirdea@intel.com> Acked-by: Pekka Enberg <penberg@kernel.org> Cc: David Ahern <dsahern@gmail.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Namhyung Kim <namhyung.kim@lge.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Steven Rostedt <rostedt@goodmis.org> Link: http://lkml.kernel.org/r/1347315303-29906-7-git-send-email-irina.tirdea@intel.com [ committer note: fixed up conflict with a116e05 in builtin-sched.c ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-09-11 06:15:03 +08:00
struct task_desc *prev, __maybe_unused *next;
u64 timestamp0, timestamp = sample->time;
int cpu = sample->cpu;
perf sched: Implement the scheduling workload replay engine Integrate the schedbench.c bits with the raw trace events that we get from the perf machinery, and activate the workload replayer/simulator. Example of a captured 'make -j' workload: $ perf sched run measurement overhead: 90 nsecs sleep measurement overhead: 2724743 nsecs the run test took 1000081 nsecs the sleep test took 2981111 nsecs version = 0.5 ... nr_run_events: 70 nr_sleep_events: 66 nr_wakeup_events: 9 target-less wakeups: 71 multi-target wakeups: 47 run events optimized: 139 task 0 ( perf: 6607), nr_events: 2 task 1 ( perf: 6608), nr_events: 6 task 2 ( : 0), nr_events: 1 task 3 ( make: 6609), nr_events: 5 task 4 ( sh: 6610), nr_events: 4 task 5 ( make: 6611), nr_events: 6 task 6 ( sh: 6612), nr_events: 4 task 7 ( make: 6613), nr_events: 5 task 8 ( migration/11: 25), nr_events: 1 task 9 ( migration/13: 29), nr_events: 1 task 10 ( migration/15: 33), nr_events: 1 task 11 ( migration/9: 21), nr_events: 1 task 12 ( sh: 6614), nr_events: 4 task 13 ( make: 6615), nr_events: 5 task 14 ( sh: 6616), nr_events: 4 task 15 ( make: 6617), nr_events: 7 task 16 ( migration/3: 9), nr_events: 1 task 17 ( migration/5: 13), nr_events: 1 task 18 ( migration/7: 17), nr_events: 1 task 19 ( migration/1: 5), nr_events: 1 task 20 ( sh: 6618), nr_events: 4 task 21 ( make: 6619), nr_events: 5 task 22 ( sh: 6620), nr_events: 4 task 23 ( make: 6621), nr_events: 10 task 24 ( sh: 6623), nr_events: 3 task 25 ( gcc: 6624), nr_events: 4 task 26 ( gcc: 6625), nr_events: 4 task 27 ( gcc: 6626), nr_events: 5 task 28 ( collect2: 6627), nr_events: 5 task 29 ( sh: 6622), nr_events: 1 task 30 ( make: 6628), nr_events: 7 task 31 ( sh: 6630), nr_events: 4 task 32 ( gcc: 6631), nr_events: 4 task 33 ( sh: 6629), nr_events: 1 task 34 ( gcc: 6632), nr_events: 4 task 35 ( gcc: 6633), nr_events: 4 task 36 ( collect2: 6634), nr_events: 4 task 37 ( make: 6635), nr_events: 8 task 38 ( sh: 6637), nr_events: 4 task 39 ( sh: 6636), nr_events: 1 task 40 ( gcc: 6638), nr_events: 4 task 41 ( gcc: 6639), nr_events: 4 task 42 ( gcc: 6640), nr_events: 4 task 43 ( collect2: 6641), nr_events: 4 task 44 ( make: 6642), nr_events: 6 task 45 ( sh: 6643), nr_events: 5 task 46 ( sh: 6644), nr_events: 3 task 47 ( sh: 6645), nr_events: 4 task 48 ( make: 6646), nr_events: 6 task 49 ( sh: 6647), nr_events: 3 task 50 ( make: 6648), nr_events: 5 task 51 ( sh: 6649), nr_events: 5 task 52 ( sh: 6650), nr_events: 6 task 53 ( make: 6651), nr_events: 4 task 54 ( make: 6652), nr_events: 5 task 55 ( make: 6653), nr_events: 4 task 56 ( make: 6654), nr_events: 4 task 57 ( make: 6655), nr_events: 5 task 58 ( sh: 6656), nr_events: 4 task 59 ( gcc: 6657), nr_events: 9 task 60 ( ksoftirqd/3: 10), nr_events: 1 task 61 ( gcc: 6658), nr_events: 4 task 62 ( make: 6659), nr_events: 5 task 63 ( sh: 6660), nr_events: 3 task 64 ( gcc: 6661), nr_events: 5 task 65 ( collect2: 6662), nr_events: 4 ------------------------------------------------------------ #1 : 256.745, ravg: 256.74, cpu: 0.00 / 0.00 #2 : 439.372, ravg: 275.01, cpu: 0.00 / 0.00 #3 : 411.971, ravg: 288.70, cpu: 0.00 / 0.00 #4 : 385.500, ravg: 298.38, cpu: 0.00 / 0.00 #5 : 366.526, ravg: 305.20, cpu: 0.00 / 0.00 #6 : 381.281, ravg: 312.81, cpu: 0.00 / 0.00 #7 : 410.756, ravg: 322.60, cpu: 0.00 / 0.00 #8 : 368.009, ravg: 327.14, cpu: 0.00 / 0.00 #9 : 408.098, ravg: 335.24, cpu: 0.00 / 0.00 #10 : 368.582, ravg: 338.57, cpu: 0.00 / 0.00 I.e. we successfully analyzed the trace, replayed it via real threads and measured the replayed workload's scheduling properties. This is how it looked like in 'top' output: PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 7164 mingo 20 0 1434m 8080 888 R 57.0 0.1 0:02.04 :perf 7165 mingo 20 0 1434m 8080 888 R 41.8 0.1 0:01.52 :perf 7228 mingo 20 0 1434m 8080 888 R 39.8 0.1 0:01.44 :gcc 7225 mingo 20 0 1434m 8080 888 R 33.8 0.1 0:01.26 :gcc 7202 mingo 20 0 1434m 8080 888 R 31.2 0.1 0:01.16 :sh 7222 mingo 20 0 1434m 8080 888 R 25.2 0.1 0:00.96 :sh 7211 mingo 20 0 1434m 8080 888 R 21.9 0.1 0:00.82 :sh 7213 mingo 20 0 1434m 8080 888 D 19.2 0.1 0:00.74 :sh 7194 mingo 20 0 1434m 8080 888 D 18.6 0.1 0:00.72 :make There's still various kinks in it - more patches to come. Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-11 18:12:54 +08:00
s64 delta;
if (verbose > 0)
perf sched: Use perf_evsel__{int,str}val This patch also stops reading the common fields, as they were not being used except for one ->common_pid case that was replaced by sample->tid, i.e. the info is already in the perf_sample struct. Also it only fills the _event structures when there is a handler. [root@sandy ~]# perf sched record sleep 30s [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 8.585 MB perf.data (~375063 samples) ] Before: [root@sandy ~]# perf stat -r 10 perf sched lat > /dev/null Performance counter stats for 'perf sched lat' (10 runs): 129.117838 task-clock # 0.994 CPUs utilized ( +- 0.28% ) 14 context-switches # 0.111 K/sec ( +- 2.10% ) 0 cpu-migrations # 0.002 K/sec ( +- 66.67% ) 7,654 page-faults # 0.059 M/sec ( +- 0.67% ) 438,121,661 cycles # 3.393 GHz ( +- 0.06% ) [83.06%] 150,808,605 stalled-cycles-frontend # 34.42% frontend cycles idle ( +- 0.14% ) [83.10%] 80,748,941 stalled-cycles-backend # 18.43% backend cycles idle ( +- 0.64% ) [66.73%] 758,605,879 instructions # 1.73 insns per cycle # 0.20 stalled cycles per insn ( +- 0.08% ) [83.54%] 162,164,321 branches # 1255.940 M/sec ( +- 0.10% ) [83.70%] 1,609,903 branch-misses # 0.99% of all branches ( +- 0.08% ) [83.62%] 0.129949153 seconds time elapsed ( +- 0.28% ) After: [root@sandy ~]# perf stat -r 10 perf sched lat > /dev/null Performance counter stats for 'perf sched lat' (10 runs): 103.592215 task-clock # 0.993 CPUs utilized ( +- 0.33% ) 12 context-switches # 0.114 K/sec ( +- 3.29% ) 0 cpu-migrations # 0.000 K/sec 7,605 page-faults # 0.073 M/sec ( +- 0.00% ) 345,796,112 cycles # 3.338 GHz ( +- 0.07% ) [82.90%] 106,876,796 stalled-cycles-frontend # 30.91% frontend cycles idle ( +- 0.38% ) [83.23%] 62,060,877 stalled-cycles-backend # 17.95% backend cycles idle ( +- 0.80% ) [67.14%] 628,246,586 instructions # 1.82 insns per cycle # 0.17 stalled cycles per insn ( +- 0.04% ) [83.64%] 134,962,057 branches # 1302.820 M/sec ( +- 0.10% ) [83.64%] 1,233,037 branch-misses # 0.91% of all branches ( +- 0.29% ) [83.41%] 0.104333272 seconds time elapsed ( +- 0.33% ) [root@sandy ~]# Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Namhyung Kim <namhyung@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-weu9t63zkrfrazkn0gxj48xy@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-09-12 06:29:17 +08:00
printf("sched_switch event %p\n", evsel);
perf sched: Implement the scheduling workload replay engine Integrate the schedbench.c bits with the raw trace events that we get from the perf machinery, and activate the workload replayer/simulator. Example of a captured 'make -j' workload: $ perf sched run measurement overhead: 90 nsecs sleep measurement overhead: 2724743 nsecs the run test took 1000081 nsecs the sleep test took 2981111 nsecs version = 0.5 ... nr_run_events: 70 nr_sleep_events: 66 nr_wakeup_events: 9 target-less wakeups: 71 multi-target wakeups: 47 run events optimized: 139 task 0 ( perf: 6607), nr_events: 2 task 1 ( perf: 6608), nr_events: 6 task 2 ( : 0), nr_events: 1 task 3 ( make: 6609), nr_events: 5 task 4 ( sh: 6610), nr_events: 4 task 5 ( make: 6611), nr_events: 6 task 6 ( sh: 6612), nr_events: 4 task 7 ( make: 6613), nr_events: 5 task 8 ( migration/11: 25), nr_events: 1 task 9 ( migration/13: 29), nr_events: 1 task 10 ( migration/15: 33), nr_events: 1 task 11 ( migration/9: 21), nr_events: 1 task 12 ( sh: 6614), nr_events: 4 task 13 ( make: 6615), nr_events: 5 task 14 ( sh: 6616), nr_events: 4 task 15 ( make: 6617), nr_events: 7 task 16 ( migration/3: 9), nr_events: 1 task 17 ( migration/5: 13), nr_events: 1 task 18 ( migration/7: 17), nr_events: 1 task 19 ( migration/1: 5), nr_events: 1 task 20 ( sh: 6618), nr_events: 4 task 21 ( make: 6619), nr_events: 5 task 22 ( sh: 6620), nr_events: 4 task 23 ( make: 6621), nr_events: 10 task 24 ( sh: 6623), nr_events: 3 task 25 ( gcc: 6624), nr_events: 4 task 26 ( gcc: 6625), nr_events: 4 task 27 ( gcc: 6626), nr_events: 5 task 28 ( collect2: 6627), nr_events: 5 task 29 ( sh: 6622), nr_events: 1 task 30 ( make: 6628), nr_events: 7 task 31 ( sh: 6630), nr_events: 4 task 32 ( gcc: 6631), nr_events: 4 task 33 ( sh: 6629), nr_events: 1 task 34 ( gcc: 6632), nr_events: 4 task 35 ( gcc: 6633), nr_events: 4 task 36 ( collect2: 6634), nr_events: 4 task 37 ( make: 6635), nr_events: 8 task 38 ( sh: 6637), nr_events: 4 task 39 ( sh: 6636), nr_events: 1 task 40 ( gcc: 6638), nr_events: 4 task 41 ( gcc: 6639), nr_events: 4 task 42 ( gcc: 6640), nr_events: 4 task 43 ( collect2: 6641), nr_events: 4 task 44 ( make: 6642), nr_events: 6 task 45 ( sh: 6643), nr_events: 5 task 46 ( sh: 6644), nr_events: 3 task 47 ( sh: 6645), nr_events: 4 task 48 ( make: 6646), nr_events: 6 task 49 ( sh: 6647), nr_events: 3 task 50 ( make: 6648), nr_events: 5 task 51 ( sh: 6649), nr_events: 5 task 52 ( sh: 6650), nr_events: 6 task 53 ( make: 6651), nr_events: 4 task 54 ( make: 6652), nr_events: 5 task 55 ( make: 6653), nr_events: 4 task 56 ( make: 6654), nr_events: 4 task 57 ( make: 6655), nr_events: 5 task 58 ( sh: 6656), nr_events: 4 task 59 ( gcc: 6657), nr_events: 9 task 60 ( ksoftirqd/3: 10), nr_events: 1 task 61 ( gcc: 6658), nr_events: 4 task 62 ( make: 6659), nr_events: 5 task 63 ( sh: 6660), nr_events: 3 task 64 ( gcc: 6661), nr_events: 5 task 65 ( collect2: 6662), nr_events: 4 ------------------------------------------------------------ #1 : 256.745, ravg: 256.74, cpu: 0.00 / 0.00 #2 : 439.372, ravg: 275.01, cpu: 0.00 / 0.00 #3 : 411.971, ravg: 288.70, cpu: 0.00 / 0.00 #4 : 385.500, ravg: 298.38, cpu: 0.00 / 0.00 #5 : 366.526, ravg: 305.20, cpu: 0.00 / 0.00 #6 : 381.281, ravg: 312.81, cpu: 0.00 / 0.00 #7 : 410.756, ravg: 322.60, cpu: 0.00 / 0.00 #8 : 368.009, ravg: 327.14, cpu: 0.00 / 0.00 #9 : 408.098, ravg: 335.24, cpu: 0.00 / 0.00 #10 : 368.582, ravg: 338.57, cpu: 0.00 / 0.00 I.e. we successfully analyzed the trace, replayed it via real threads and measured the replayed workload's scheduling properties. This is how it looked like in 'top' output: PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 7164 mingo 20 0 1434m 8080 888 R 57.0 0.1 0:02.04 :perf 7165 mingo 20 0 1434m 8080 888 R 41.8 0.1 0:01.52 :perf 7228 mingo 20 0 1434m 8080 888 R 39.8 0.1 0:01.44 :gcc 7225 mingo 20 0 1434m 8080 888 R 33.8 0.1 0:01.26 :gcc 7202 mingo 20 0 1434m 8080 888 R 31.2 0.1 0:01.16 :sh 7222 mingo 20 0 1434m 8080 888 R 25.2 0.1 0:00.96 :sh 7211 mingo 20 0 1434m 8080 888 R 21.9 0.1 0:00.82 :sh 7213 mingo 20 0 1434m 8080 888 D 19.2 0.1 0:00.74 :sh 7194 mingo 20 0 1434m 8080 888 D 18.6 0.1 0:00.72 :make There's still various kinks in it - more patches to come. Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-11 18:12:54 +08:00
if (cpu >= MAX_CPUS || cpu < 0)
return 0;
perf sched: Implement the scheduling workload replay engine Integrate the schedbench.c bits with the raw trace events that we get from the perf machinery, and activate the workload replayer/simulator. Example of a captured 'make -j' workload: $ perf sched run measurement overhead: 90 nsecs sleep measurement overhead: 2724743 nsecs the run test took 1000081 nsecs the sleep test took 2981111 nsecs version = 0.5 ... nr_run_events: 70 nr_sleep_events: 66 nr_wakeup_events: 9 target-less wakeups: 71 multi-target wakeups: 47 run events optimized: 139 task 0 ( perf: 6607), nr_events: 2 task 1 ( perf: 6608), nr_events: 6 task 2 ( : 0), nr_events: 1 task 3 ( make: 6609), nr_events: 5 task 4 ( sh: 6610), nr_events: 4 task 5 ( make: 6611), nr_events: 6 task 6 ( sh: 6612), nr_events: 4 task 7 ( make: 6613), nr_events: 5 task 8 ( migration/11: 25), nr_events: 1 task 9 ( migration/13: 29), nr_events: 1 task 10 ( migration/15: 33), nr_events: 1 task 11 ( migration/9: 21), nr_events: 1 task 12 ( sh: 6614), nr_events: 4 task 13 ( make: 6615), nr_events: 5 task 14 ( sh: 6616), nr_events: 4 task 15 ( make: 6617), nr_events: 7 task 16 ( migration/3: 9), nr_events: 1 task 17 ( migration/5: 13), nr_events: 1 task 18 ( migration/7: 17), nr_events: 1 task 19 ( migration/1: 5), nr_events: 1 task 20 ( sh: 6618), nr_events: 4 task 21 ( make: 6619), nr_events: 5 task 22 ( sh: 6620), nr_events: 4 task 23 ( make: 6621), nr_events: 10 task 24 ( sh: 6623), nr_events: 3 task 25 ( gcc: 6624), nr_events: 4 task 26 ( gcc: 6625), nr_events: 4 task 27 ( gcc: 6626), nr_events: 5 task 28 ( collect2: 6627), nr_events: 5 task 29 ( sh: 6622), nr_events: 1 task 30 ( make: 6628), nr_events: 7 task 31 ( sh: 6630), nr_events: 4 task 32 ( gcc: 6631), nr_events: 4 task 33 ( sh: 6629), nr_events: 1 task 34 ( gcc: 6632), nr_events: 4 task 35 ( gcc: 6633), nr_events: 4 task 36 ( collect2: 6634), nr_events: 4 task 37 ( make: 6635), nr_events: 8 task 38 ( sh: 6637), nr_events: 4 task 39 ( sh: 6636), nr_events: 1 task 40 ( gcc: 6638), nr_events: 4 task 41 ( gcc: 6639), nr_events: 4 task 42 ( gcc: 6640), nr_events: 4 task 43 ( collect2: 6641), nr_events: 4 task 44 ( make: 6642), nr_events: 6 task 45 ( sh: 6643), nr_events: 5 task 46 ( sh: 6644), nr_events: 3 task 47 ( sh: 6645), nr_events: 4 task 48 ( make: 6646), nr_events: 6 task 49 ( sh: 6647), nr_events: 3 task 50 ( make: 6648), nr_events: 5 task 51 ( sh: 6649), nr_events: 5 task 52 ( sh: 6650), nr_events: 6 task 53 ( make: 6651), nr_events: 4 task 54 ( make: 6652), nr_events: 5 task 55 ( make: 6653), nr_events: 4 task 56 ( make: 6654), nr_events: 4 task 57 ( make: 6655), nr_events: 5 task 58 ( sh: 6656), nr_events: 4 task 59 ( gcc: 6657), nr_events: 9 task 60 ( ksoftirqd/3: 10), nr_events: 1 task 61 ( gcc: 6658), nr_events: 4 task 62 ( make: 6659), nr_events: 5 task 63 ( sh: 6660), nr_events: 3 task 64 ( gcc: 6661), nr_events: 5 task 65 ( collect2: 6662), nr_events: 4 ------------------------------------------------------------ #1 : 256.745, ravg: 256.74, cpu: 0.00 / 0.00 #2 : 439.372, ravg: 275.01, cpu: 0.00 / 0.00 #3 : 411.971, ravg: 288.70, cpu: 0.00 / 0.00 #4 : 385.500, ravg: 298.38, cpu: 0.00 / 0.00 #5 : 366.526, ravg: 305.20, cpu: 0.00 / 0.00 #6 : 381.281, ravg: 312.81, cpu: 0.00 / 0.00 #7 : 410.756, ravg: 322.60, cpu: 0.00 / 0.00 #8 : 368.009, ravg: 327.14, cpu: 0.00 / 0.00 #9 : 408.098, ravg: 335.24, cpu: 0.00 / 0.00 #10 : 368.582, ravg: 338.57, cpu: 0.00 / 0.00 I.e. we successfully analyzed the trace, replayed it via real threads and measured the replayed workload's scheduling properties. This is how it looked like in 'top' output: PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 7164 mingo 20 0 1434m 8080 888 R 57.0 0.1 0:02.04 :perf 7165 mingo 20 0 1434m 8080 888 R 41.8 0.1 0:01.52 :perf 7228 mingo 20 0 1434m 8080 888 R 39.8 0.1 0:01.44 :gcc 7225 mingo 20 0 1434m 8080 888 R 33.8 0.1 0:01.26 :gcc 7202 mingo 20 0 1434m 8080 888 R 31.2 0.1 0:01.16 :sh 7222 mingo 20 0 1434m 8080 888 R 25.2 0.1 0:00.96 :sh 7211 mingo 20 0 1434m 8080 888 R 21.9 0.1 0:00.82 :sh 7213 mingo 20 0 1434m 8080 888 D 19.2 0.1 0:00.74 :sh 7194 mingo 20 0 1434m 8080 888 D 18.6 0.1 0:00.72 :make There's still various kinks in it - more patches to come. Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-11 18:12:54 +08:00
timestamp0 = sched->cpu_last_switched[cpu];
perf sched: Implement the scheduling workload replay engine Integrate the schedbench.c bits with the raw trace events that we get from the perf machinery, and activate the workload replayer/simulator. Example of a captured 'make -j' workload: $ perf sched run measurement overhead: 90 nsecs sleep measurement overhead: 2724743 nsecs the run test took 1000081 nsecs the sleep test took 2981111 nsecs version = 0.5 ... nr_run_events: 70 nr_sleep_events: 66 nr_wakeup_events: 9 target-less wakeups: 71 multi-target wakeups: 47 run events optimized: 139 task 0 ( perf: 6607), nr_events: 2 task 1 ( perf: 6608), nr_events: 6 task 2 ( : 0), nr_events: 1 task 3 ( make: 6609), nr_events: 5 task 4 ( sh: 6610), nr_events: 4 task 5 ( make: 6611), nr_events: 6 task 6 ( sh: 6612), nr_events: 4 task 7 ( make: 6613), nr_events: 5 task 8 ( migration/11: 25), nr_events: 1 task 9 ( migration/13: 29), nr_events: 1 task 10 ( migration/15: 33), nr_events: 1 task 11 ( migration/9: 21), nr_events: 1 task 12 ( sh: 6614), nr_events: 4 task 13 ( make: 6615), nr_events: 5 task 14 ( sh: 6616), nr_events: 4 task 15 ( make: 6617), nr_events: 7 task 16 ( migration/3: 9), nr_events: 1 task 17 ( migration/5: 13), nr_events: 1 task 18 ( migration/7: 17), nr_events: 1 task 19 ( migration/1: 5), nr_events: 1 task 20 ( sh: 6618), nr_events: 4 task 21 ( make: 6619), nr_events: 5 task 22 ( sh: 6620), nr_events: 4 task 23 ( make: 6621), nr_events: 10 task 24 ( sh: 6623), nr_events: 3 task 25 ( gcc: 6624), nr_events: 4 task 26 ( gcc: 6625), nr_events: 4 task 27 ( gcc: 6626), nr_events: 5 task 28 ( collect2: 6627), nr_events: 5 task 29 ( sh: 6622), nr_events: 1 task 30 ( make: 6628), nr_events: 7 task 31 ( sh: 6630), nr_events: 4 task 32 ( gcc: 6631), nr_events: 4 task 33 ( sh: 6629), nr_events: 1 task 34 ( gcc: 6632), nr_events: 4 task 35 ( gcc: 6633), nr_events: 4 task 36 ( collect2: 6634), nr_events: 4 task 37 ( make: 6635), nr_events: 8 task 38 ( sh: 6637), nr_events: 4 task 39 ( sh: 6636), nr_events: 1 task 40 ( gcc: 6638), nr_events: 4 task 41 ( gcc: 6639), nr_events: 4 task 42 ( gcc: 6640), nr_events: 4 task 43 ( collect2: 6641), nr_events: 4 task 44 ( make: 6642), nr_events: 6 task 45 ( sh: 6643), nr_events: 5 task 46 ( sh: 6644), nr_events: 3 task 47 ( sh: 6645), nr_events: 4 task 48 ( make: 6646), nr_events: 6 task 49 ( sh: 6647), nr_events: 3 task 50 ( make: 6648), nr_events: 5 task 51 ( sh: 6649), nr_events: 5 task 52 ( sh: 6650), nr_events: 6 task 53 ( make: 6651), nr_events: 4 task 54 ( make: 6652), nr_events: 5 task 55 ( make: 6653), nr_events: 4 task 56 ( make: 6654), nr_events: 4 task 57 ( make: 6655), nr_events: 5 task 58 ( sh: 6656), nr_events: 4 task 59 ( gcc: 6657), nr_events: 9 task 60 ( ksoftirqd/3: 10), nr_events: 1 task 61 ( gcc: 6658), nr_events: 4 task 62 ( make: 6659), nr_events: 5 task 63 ( sh: 6660), nr_events: 3 task 64 ( gcc: 6661), nr_events: 5 task 65 ( collect2: 6662), nr_events: 4 ------------------------------------------------------------ #1 : 256.745, ravg: 256.74, cpu: 0.00 / 0.00 #2 : 439.372, ravg: 275.01, cpu: 0.00 / 0.00 #3 : 411.971, ravg: 288.70, cpu: 0.00 / 0.00 #4 : 385.500, ravg: 298.38, cpu: 0.00 / 0.00 #5 : 366.526, ravg: 305.20, cpu: 0.00 / 0.00 #6 : 381.281, ravg: 312.81, cpu: 0.00 / 0.00 #7 : 410.756, ravg: 322.60, cpu: 0.00 / 0.00 #8 : 368.009, ravg: 327.14, cpu: 0.00 / 0.00 #9 : 408.098, ravg: 335.24, cpu: 0.00 / 0.00 #10 : 368.582, ravg: 338.57, cpu: 0.00 / 0.00 I.e. we successfully analyzed the trace, replayed it via real threads and measured the replayed workload's scheduling properties. This is how it looked like in 'top' output: PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 7164 mingo 20 0 1434m 8080 888 R 57.0 0.1 0:02.04 :perf 7165 mingo 20 0 1434m 8080 888 R 41.8 0.1 0:01.52 :perf 7228 mingo 20 0 1434m 8080 888 R 39.8 0.1 0:01.44 :gcc 7225 mingo 20 0 1434m 8080 888 R 33.8 0.1 0:01.26 :gcc 7202 mingo 20 0 1434m 8080 888 R 31.2 0.1 0:01.16 :sh 7222 mingo 20 0 1434m 8080 888 R 25.2 0.1 0:00.96 :sh 7211 mingo 20 0 1434m 8080 888 R 21.9 0.1 0:00.82 :sh 7213 mingo 20 0 1434m 8080 888 D 19.2 0.1 0:00.74 :sh 7194 mingo 20 0 1434m 8080 888 D 18.6 0.1 0:00.72 :make There's still various kinks in it - more patches to come. Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-11 18:12:54 +08:00
if (timestamp0)
delta = timestamp - timestamp0;
else
delta = 0;
if (delta < 0) {
pr_err("hm, delta: %" PRIu64 " < 0 ?\n", delta);
return -1;
}
perf sched: Implement the scheduling workload replay engine Integrate the schedbench.c bits with the raw trace events that we get from the perf machinery, and activate the workload replayer/simulator. Example of a captured 'make -j' workload: $ perf sched run measurement overhead: 90 nsecs sleep measurement overhead: 2724743 nsecs the run test took 1000081 nsecs the sleep test took 2981111 nsecs version = 0.5 ... nr_run_events: 70 nr_sleep_events: 66 nr_wakeup_events: 9 target-less wakeups: 71 multi-target wakeups: 47 run events optimized: 139 task 0 ( perf: 6607), nr_events: 2 task 1 ( perf: 6608), nr_events: 6 task 2 ( : 0), nr_events: 1 task 3 ( make: 6609), nr_events: 5 task 4 ( sh: 6610), nr_events: 4 task 5 ( make: 6611), nr_events: 6 task 6 ( sh: 6612), nr_events: 4 task 7 ( make: 6613), nr_events: 5 task 8 ( migration/11: 25), nr_events: 1 task 9 ( migration/13: 29), nr_events: 1 task 10 ( migration/15: 33), nr_events: 1 task 11 ( migration/9: 21), nr_events: 1 task 12 ( sh: 6614), nr_events: 4 task 13 ( make: 6615), nr_events: 5 task 14 ( sh: 6616), nr_events: 4 task 15 ( make: 6617), nr_events: 7 task 16 ( migration/3: 9), nr_events: 1 task 17 ( migration/5: 13), nr_events: 1 task 18 ( migration/7: 17), nr_events: 1 task 19 ( migration/1: 5), nr_events: 1 task 20 ( sh: 6618), nr_events: 4 task 21 ( make: 6619), nr_events: 5 task 22 ( sh: 6620), nr_events: 4 task 23 ( make: 6621), nr_events: 10 task 24 ( sh: 6623), nr_events: 3 task 25 ( gcc: 6624), nr_events: 4 task 26 ( gcc: 6625), nr_events: 4 task 27 ( gcc: 6626), nr_events: 5 task 28 ( collect2: 6627), nr_events: 5 task 29 ( sh: 6622), nr_events: 1 task 30 ( make: 6628), nr_events: 7 task 31 ( sh: 6630), nr_events: 4 task 32 ( gcc: 6631), nr_events: 4 task 33 ( sh: 6629), nr_events: 1 task 34 ( gcc: 6632), nr_events: 4 task 35 ( gcc: 6633), nr_events: 4 task 36 ( collect2: 6634), nr_events: 4 task 37 ( make: 6635), nr_events: 8 task 38 ( sh: 6637), nr_events: 4 task 39 ( sh: 6636), nr_events: 1 task 40 ( gcc: 6638), nr_events: 4 task 41 ( gcc: 6639), nr_events: 4 task 42 ( gcc: 6640), nr_events: 4 task 43 ( collect2: 6641), nr_events: 4 task 44 ( make: 6642), nr_events: 6 task 45 ( sh: 6643), nr_events: 5 task 46 ( sh: 6644), nr_events: 3 task 47 ( sh: 6645), nr_events: 4 task 48 ( make: 6646), nr_events: 6 task 49 ( sh: 6647), nr_events: 3 task 50 ( make: 6648), nr_events: 5 task 51 ( sh: 6649), nr_events: 5 task 52 ( sh: 6650), nr_events: 6 task 53 ( make: 6651), nr_events: 4 task 54 ( make: 6652), nr_events: 5 task 55 ( make: 6653), nr_events: 4 task 56 ( make: 6654), nr_events: 4 task 57 ( make: 6655), nr_events: 5 task 58 ( sh: 6656), nr_events: 4 task 59 ( gcc: 6657), nr_events: 9 task 60 ( ksoftirqd/3: 10), nr_events: 1 task 61 ( gcc: 6658), nr_events: 4 task 62 ( make: 6659), nr_events: 5 task 63 ( sh: 6660), nr_events: 3 task 64 ( gcc: 6661), nr_events: 5 task 65 ( collect2: 6662), nr_events: 4 ------------------------------------------------------------ #1 : 256.745, ravg: 256.74, cpu: 0.00 / 0.00 #2 : 439.372, ravg: 275.01, cpu: 0.00 / 0.00 #3 : 411.971, ravg: 288.70, cpu: 0.00 / 0.00 #4 : 385.500, ravg: 298.38, cpu: 0.00 / 0.00 #5 : 366.526, ravg: 305.20, cpu: 0.00 / 0.00 #6 : 381.281, ravg: 312.81, cpu: 0.00 / 0.00 #7 : 410.756, ravg: 322.60, cpu: 0.00 / 0.00 #8 : 368.009, ravg: 327.14, cpu: 0.00 / 0.00 #9 : 408.098, ravg: 335.24, cpu: 0.00 / 0.00 #10 : 368.582, ravg: 338.57, cpu: 0.00 / 0.00 I.e. we successfully analyzed the trace, replayed it via real threads and measured the replayed workload's scheduling properties. This is how it looked like in 'top' output: PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 7164 mingo 20 0 1434m 8080 888 R 57.0 0.1 0:02.04 :perf 7165 mingo 20 0 1434m 8080 888 R 41.8 0.1 0:01.52 :perf 7228 mingo 20 0 1434m 8080 888 R 39.8 0.1 0:01.44 :gcc 7225 mingo 20 0 1434m 8080 888 R 33.8 0.1 0:01.26 :gcc 7202 mingo 20 0 1434m 8080 888 R 31.2 0.1 0:01.16 :sh 7222 mingo 20 0 1434m 8080 888 R 25.2 0.1 0:00.96 :sh 7211 mingo 20 0 1434m 8080 888 R 21.9 0.1 0:00.82 :sh 7213 mingo 20 0 1434m 8080 888 D 19.2 0.1 0:00.74 :sh 7194 mingo 20 0 1434m 8080 888 D 18.6 0.1 0:00.72 :make There's still various kinks in it - more patches to come. Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-11 18:12:54 +08:00
perf sched: Don't read all tracepoint variables in advance Do it just at the actual consumer of these fields, that way we avoid needless lookups: [root@sandy ~]# perf sched record sleep 30s [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 8.585 MB perf.data (~375063 samples) ] Before: [root@sandy ~]# perf stat -r 10 perf sched lat > /dev/null Performance counter stats for 'perf sched lat' (10 runs): 103.592215 task-clock # 0.993 CPUs utilized ( +- 0.33% ) 12 context-switches # 0.114 K/sec ( +- 3.29% ) 0 cpu-migrations # 0.000 K/sec 7,605 page-faults # 0.073 M/sec ( +- 0.00% ) 345,796,112 cycles # 3.338 GHz ( +- 0.07% ) [82.90%] 106,876,796 stalled-cycles-frontend # 30.91% frontend cycles idle ( +- 0.38% ) [83.23%] 62,060,877 stalled-cycles-backend # 17.95% backend cycles idle ( +- 0.80% ) [67.14%] 628,246,586 instructions # 1.82 insns per cycle # 0.17 stalled cycles per insn ( +- 0.04% ) [83.64%] 134,962,057 branches # 1302.820 M/sec ( +- 0.10% ) [83.64%] 1,233,037 branch-misses # 0.91% of all branches ( +- 0.29% ) [83.41%] 0.104333272 seconds time elapsed ( +- 0.33% ) [root@sandy ~]# perf stat -r 10 perf sched lat > /dev/null Performance counter stats for 'perf sched lat' (10 runs): 98.848272 task-clock # 0.993 CPUs utilized ( +- 0.48% ) 11 context-switches # 0.112 K/sec ( +- 2.83% ) 0 cpu-migrations # 0.003 K/sec ( +- 50.92% ) 7,604 page-faults # 0.077 M/sec ( +- 0.00% ) 332,216,085 cycles # 3.361 GHz ( +- 0.14% ) [82.87%] 100,623,710 stalled-cycles-frontend # 30.29% frontend cycles idle ( +- 0.53% ) [82.95%] 58,788,692 stalled-cycles-backend # 17.70% backend cycles idle ( +- 0.59% ) [67.15%] 609,402,433 instructions # 1.83 insns per cycle # 0.17 stalled cycles per insn ( +- 0.04% ) [83.76%] 131,277,138 branches # 1328.067 M/sec ( +- 0.06% ) [83.77%] 1,117,871 branch-misses # 0.85% of all branches ( +- 0.32% ) [83.51%] 0.099580430 seconds time elapsed ( +- 0.48% ) [root@sandy ~]# Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Namhyung Kim <namhyung@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-kracdpw8wqlr0xjh75uk8g11@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-09-12 06:29:17 +08:00
pr_debug(" ... switch from %s/%d to %s/%d [ran %" PRIu64 " nsecs]\n",
prev_comm, prev_pid, next_comm, next_pid, delta);
perf sched: Implement the scheduling workload replay engine Integrate the schedbench.c bits with the raw trace events that we get from the perf machinery, and activate the workload replayer/simulator. Example of a captured 'make -j' workload: $ perf sched run measurement overhead: 90 nsecs sleep measurement overhead: 2724743 nsecs the run test took 1000081 nsecs the sleep test took 2981111 nsecs version = 0.5 ... nr_run_events: 70 nr_sleep_events: 66 nr_wakeup_events: 9 target-less wakeups: 71 multi-target wakeups: 47 run events optimized: 139 task 0 ( perf: 6607), nr_events: 2 task 1 ( perf: 6608), nr_events: 6 task 2 ( : 0), nr_events: 1 task 3 ( make: 6609), nr_events: 5 task 4 ( sh: 6610), nr_events: 4 task 5 ( make: 6611), nr_events: 6 task 6 ( sh: 6612), nr_events: 4 task 7 ( make: 6613), nr_events: 5 task 8 ( migration/11: 25), nr_events: 1 task 9 ( migration/13: 29), nr_events: 1 task 10 ( migration/15: 33), nr_events: 1 task 11 ( migration/9: 21), nr_events: 1 task 12 ( sh: 6614), nr_events: 4 task 13 ( make: 6615), nr_events: 5 task 14 ( sh: 6616), nr_events: 4 task 15 ( make: 6617), nr_events: 7 task 16 ( migration/3: 9), nr_events: 1 task 17 ( migration/5: 13), nr_events: 1 task 18 ( migration/7: 17), nr_events: 1 task 19 ( migration/1: 5), nr_events: 1 task 20 ( sh: 6618), nr_events: 4 task 21 ( make: 6619), nr_events: 5 task 22 ( sh: 6620), nr_events: 4 task 23 ( make: 6621), nr_events: 10 task 24 ( sh: 6623), nr_events: 3 task 25 ( gcc: 6624), nr_events: 4 task 26 ( gcc: 6625), nr_events: 4 task 27 ( gcc: 6626), nr_events: 5 task 28 ( collect2: 6627), nr_events: 5 task 29 ( sh: 6622), nr_events: 1 task 30 ( make: 6628), nr_events: 7 task 31 ( sh: 6630), nr_events: 4 task 32 ( gcc: 6631), nr_events: 4 task 33 ( sh: 6629), nr_events: 1 task 34 ( gcc: 6632), nr_events: 4 task 35 ( gcc: 6633), nr_events: 4 task 36 ( collect2: 6634), nr_events: 4 task 37 ( make: 6635), nr_events: 8 task 38 ( sh: 6637), nr_events: 4 task 39 ( sh: 6636), nr_events: 1 task 40 ( gcc: 6638), nr_events: 4 task 41 ( gcc: 6639), nr_events: 4 task 42 ( gcc: 6640), nr_events: 4 task 43 ( collect2: 6641), nr_events: 4 task 44 ( make: 6642), nr_events: 6 task 45 ( sh: 6643), nr_events: 5 task 46 ( sh: 6644), nr_events: 3 task 47 ( sh: 6645), nr_events: 4 task 48 ( make: 6646), nr_events: 6 task 49 ( sh: 6647), nr_events: 3 task 50 ( make: 6648), nr_events: 5 task 51 ( sh: 6649), nr_events: 5 task 52 ( sh: 6650), nr_events: 6 task 53 ( make: 6651), nr_events: 4 task 54 ( make: 6652), nr_events: 5 task 55 ( make: 6653), nr_events: 4 task 56 ( make: 6654), nr_events: 4 task 57 ( make: 6655), nr_events: 5 task 58 ( sh: 6656), nr_events: 4 task 59 ( gcc: 6657), nr_events: 9 task 60 ( ksoftirqd/3: 10), nr_events: 1 task 61 ( gcc: 6658), nr_events: 4 task 62 ( make: 6659), nr_events: 5 task 63 ( sh: 6660), nr_events: 3 task 64 ( gcc: 6661), nr_events: 5 task 65 ( collect2: 6662), nr_events: 4 ------------------------------------------------------------ #1 : 256.745, ravg: 256.74, cpu: 0.00 / 0.00 #2 : 439.372, ravg: 275.01, cpu: 0.00 / 0.00 #3 : 411.971, ravg: 288.70, cpu: 0.00 / 0.00 #4 : 385.500, ravg: 298.38, cpu: 0.00 / 0.00 #5 : 366.526, ravg: 305.20, cpu: 0.00 / 0.00 #6 : 381.281, ravg: 312.81, cpu: 0.00 / 0.00 #7 : 410.756, ravg: 322.60, cpu: 0.00 / 0.00 #8 : 368.009, ravg: 327.14, cpu: 0.00 / 0.00 #9 : 408.098, ravg: 335.24, cpu: 0.00 / 0.00 #10 : 368.582, ravg: 338.57, cpu: 0.00 / 0.00 I.e. we successfully analyzed the trace, replayed it via real threads and measured the replayed workload's scheduling properties. This is how it looked like in 'top' output: PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 7164 mingo 20 0 1434m 8080 888 R 57.0 0.1 0:02.04 :perf 7165 mingo 20 0 1434m 8080 888 R 41.8 0.1 0:01.52 :perf 7228 mingo 20 0 1434m 8080 888 R 39.8 0.1 0:01.44 :gcc 7225 mingo 20 0 1434m 8080 888 R 33.8 0.1 0:01.26 :gcc 7202 mingo 20 0 1434m 8080 888 R 31.2 0.1 0:01.16 :sh 7222 mingo 20 0 1434m 8080 888 R 25.2 0.1 0:00.96 :sh 7211 mingo 20 0 1434m 8080 888 R 21.9 0.1 0:00.82 :sh 7213 mingo 20 0 1434m 8080 888 D 19.2 0.1 0:00.74 :sh 7194 mingo 20 0 1434m 8080 888 D 18.6 0.1 0:00.72 :make There's still various kinks in it - more patches to come. Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-11 18:12:54 +08:00
perf sched: Don't read all tracepoint variables in advance Do it just at the actual consumer of these fields, that way we avoid needless lookups: [root@sandy ~]# perf sched record sleep 30s [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 8.585 MB perf.data (~375063 samples) ] Before: [root@sandy ~]# perf stat -r 10 perf sched lat > /dev/null Performance counter stats for 'perf sched lat' (10 runs): 103.592215 task-clock # 0.993 CPUs utilized ( +- 0.33% ) 12 context-switches # 0.114 K/sec ( +- 3.29% ) 0 cpu-migrations # 0.000 K/sec 7,605 page-faults # 0.073 M/sec ( +- 0.00% ) 345,796,112 cycles # 3.338 GHz ( +- 0.07% ) [82.90%] 106,876,796 stalled-cycles-frontend # 30.91% frontend cycles idle ( +- 0.38% ) [83.23%] 62,060,877 stalled-cycles-backend # 17.95% backend cycles idle ( +- 0.80% ) [67.14%] 628,246,586 instructions # 1.82 insns per cycle # 0.17 stalled cycles per insn ( +- 0.04% ) [83.64%] 134,962,057 branches # 1302.820 M/sec ( +- 0.10% ) [83.64%] 1,233,037 branch-misses # 0.91% of all branches ( +- 0.29% ) [83.41%] 0.104333272 seconds time elapsed ( +- 0.33% ) [root@sandy ~]# perf stat -r 10 perf sched lat > /dev/null Performance counter stats for 'perf sched lat' (10 runs): 98.848272 task-clock # 0.993 CPUs utilized ( +- 0.48% ) 11 context-switches # 0.112 K/sec ( +- 2.83% ) 0 cpu-migrations # 0.003 K/sec ( +- 50.92% ) 7,604 page-faults # 0.077 M/sec ( +- 0.00% ) 332,216,085 cycles # 3.361 GHz ( +- 0.14% ) [82.87%] 100,623,710 stalled-cycles-frontend # 30.29% frontend cycles idle ( +- 0.53% ) [82.95%] 58,788,692 stalled-cycles-backend # 17.70% backend cycles idle ( +- 0.59% ) [67.15%] 609,402,433 instructions # 1.83 insns per cycle # 0.17 stalled cycles per insn ( +- 0.04% ) [83.76%] 131,277,138 branches # 1328.067 M/sec ( +- 0.06% ) [83.77%] 1,117,871 branch-misses # 0.85% of all branches ( +- 0.32% ) [83.51%] 0.099580430 seconds time elapsed ( +- 0.48% ) [root@sandy ~]# Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Namhyung Kim <namhyung@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-kracdpw8wqlr0xjh75uk8g11@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-09-12 06:29:17 +08:00
prev = register_pid(sched, prev_pid, prev_comm);
next = register_pid(sched, next_pid, next_comm);
perf sched: Implement the scheduling workload replay engine Integrate the schedbench.c bits with the raw trace events that we get from the perf machinery, and activate the workload replayer/simulator. Example of a captured 'make -j' workload: $ perf sched run measurement overhead: 90 nsecs sleep measurement overhead: 2724743 nsecs the run test took 1000081 nsecs the sleep test took 2981111 nsecs version = 0.5 ... nr_run_events: 70 nr_sleep_events: 66 nr_wakeup_events: 9 target-less wakeups: 71 multi-target wakeups: 47 run events optimized: 139 task 0 ( perf: 6607), nr_events: 2 task 1 ( perf: 6608), nr_events: 6 task 2 ( : 0), nr_events: 1 task 3 ( make: 6609), nr_events: 5 task 4 ( sh: 6610), nr_events: 4 task 5 ( make: 6611), nr_events: 6 task 6 ( sh: 6612), nr_events: 4 task 7 ( make: 6613), nr_events: 5 task 8 ( migration/11: 25), nr_events: 1 task 9 ( migration/13: 29), nr_events: 1 task 10 ( migration/15: 33), nr_events: 1 task 11 ( migration/9: 21), nr_events: 1 task 12 ( sh: 6614), nr_events: 4 task 13 ( make: 6615), nr_events: 5 task 14 ( sh: 6616), nr_events: 4 task 15 ( make: 6617), nr_events: 7 task 16 ( migration/3: 9), nr_events: 1 task 17 ( migration/5: 13), nr_events: 1 task 18 ( migration/7: 17), nr_events: 1 task 19 ( migration/1: 5), nr_events: 1 task 20 ( sh: 6618), nr_events: 4 task 21 ( make: 6619), nr_events: 5 task 22 ( sh: 6620), nr_events: 4 task 23 ( make: 6621), nr_events: 10 task 24 ( sh: 6623), nr_events: 3 task 25 ( gcc: 6624), nr_events: 4 task 26 ( gcc: 6625), nr_events: 4 task 27 ( gcc: 6626), nr_events: 5 task 28 ( collect2: 6627), nr_events: 5 task 29 ( sh: 6622), nr_events: 1 task 30 ( make: 6628), nr_events: 7 task 31 ( sh: 6630), nr_events: 4 task 32 ( gcc: 6631), nr_events: 4 task 33 ( sh: 6629), nr_events: 1 task 34 ( gcc: 6632), nr_events: 4 task 35 ( gcc: 6633), nr_events: 4 task 36 ( collect2: 6634), nr_events: 4 task 37 ( make: 6635), nr_events: 8 task 38 ( sh: 6637), nr_events: 4 task 39 ( sh: 6636), nr_events: 1 task 40 ( gcc: 6638), nr_events: 4 task 41 ( gcc: 6639), nr_events: 4 task 42 ( gcc: 6640), nr_events: 4 task 43 ( collect2: 6641), nr_events: 4 task 44 ( make: 6642), nr_events: 6 task 45 ( sh: 6643), nr_events: 5 task 46 ( sh: 6644), nr_events: 3 task 47 ( sh: 6645), nr_events: 4 task 48 ( make: 6646), nr_events: 6 task 49 ( sh: 6647), nr_events: 3 task 50 ( make: 6648), nr_events: 5 task 51 ( sh: 6649), nr_events: 5 task 52 ( sh: 6650), nr_events: 6 task 53 ( make: 6651), nr_events: 4 task 54 ( make: 6652), nr_events: 5 task 55 ( make: 6653), nr_events: 4 task 56 ( make: 6654), nr_events: 4 task 57 ( make: 6655), nr_events: 5 task 58 ( sh: 6656), nr_events: 4 task 59 ( gcc: 6657), nr_events: 9 task 60 ( ksoftirqd/3: 10), nr_events: 1 task 61 ( gcc: 6658), nr_events: 4 task 62 ( make: 6659), nr_events: 5 task 63 ( sh: 6660), nr_events: 3 task 64 ( gcc: 6661), nr_events: 5 task 65 ( collect2: 6662), nr_events: 4 ------------------------------------------------------------ #1 : 256.745, ravg: 256.74, cpu: 0.00 / 0.00 #2 : 439.372, ravg: 275.01, cpu: 0.00 / 0.00 #3 : 411.971, ravg: 288.70, cpu: 0.00 / 0.00 #4 : 385.500, ravg: 298.38, cpu: 0.00 / 0.00 #5 : 366.526, ravg: 305.20, cpu: 0.00 / 0.00 #6 : 381.281, ravg: 312.81, cpu: 0.00 / 0.00 #7 : 410.756, ravg: 322.60, cpu: 0.00 / 0.00 #8 : 368.009, ravg: 327.14, cpu: 0.00 / 0.00 #9 : 408.098, ravg: 335.24, cpu: 0.00 / 0.00 #10 : 368.582, ravg: 338.57, cpu: 0.00 / 0.00 I.e. we successfully analyzed the trace, replayed it via real threads and measured the replayed workload's scheduling properties. This is how it looked like in 'top' output: PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 7164 mingo 20 0 1434m 8080 888 R 57.0 0.1 0:02.04 :perf 7165 mingo 20 0 1434m 8080 888 R 41.8 0.1 0:01.52 :perf 7228 mingo 20 0 1434m 8080 888 R 39.8 0.1 0:01.44 :gcc 7225 mingo 20 0 1434m 8080 888 R 33.8 0.1 0:01.26 :gcc 7202 mingo 20 0 1434m 8080 888 R 31.2 0.1 0:01.16 :sh 7222 mingo 20 0 1434m 8080 888 R 25.2 0.1 0:00.96 :sh 7211 mingo 20 0 1434m 8080 888 R 21.9 0.1 0:00.82 :sh 7213 mingo 20 0 1434m 8080 888 D 19.2 0.1 0:00.74 :sh 7194 mingo 20 0 1434m 8080 888 D 18.6 0.1 0:00.72 :make There's still various kinks in it - more patches to come. Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-11 18:12:54 +08:00
sched->cpu_last_switched[cpu] = timestamp;
perf sched: Implement the scheduling workload replay engine Integrate the schedbench.c bits with the raw trace events that we get from the perf machinery, and activate the workload replayer/simulator. Example of a captured 'make -j' workload: $ perf sched run measurement overhead: 90 nsecs sleep measurement overhead: 2724743 nsecs the run test took 1000081 nsecs the sleep test took 2981111 nsecs version = 0.5 ... nr_run_events: 70 nr_sleep_events: 66 nr_wakeup_events: 9 target-less wakeups: 71 multi-target wakeups: 47 run events optimized: 139 task 0 ( perf: 6607), nr_events: 2 task 1 ( perf: 6608), nr_events: 6 task 2 ( : 0), nr_events: 1 task 3 ( make: 6609), nr_events: 5 task 4 ( sh: 6610), nr_events: 4 task 5 ( make: 6611), nr_events: 6 task 6 ( sh: 6612), nr_events: 4 task 7 ( make: 6613), nr_events: 5 task 8 ( migration/11: 25), nr_events: 1 task 9 ( migration/13: 29), nr_events: 1 task 10 ( migration/15: 33), nr_events: 1 task 11 ( migration/9: 21), nr_events: 1 task 12 ( sh: 6614), nr_events: 4 task 13 ( make: 6615), nr_events: 5 task 14 ( sh: 6616), nr_events: 4 task 15 ( make: 6617), nr_events: 7 task 16 ( migration/3: 9), nr_events: 1 task 17 ( migration/5: 13), nr_events: 1 task 18 ( migration/7: 17), nr_events: 1 task 19 ( migration/1: 5), nr_events: 1 task 20 ( sh: 6618), nr_events: 4 task 21 ( make: 6619), nr_events: 5 task 22 ( sh: 6620), nr_events: 4 task 23 ( make: 6621), nr_events: 10 task 24 ( sh: 6623), nr_events: 3 task 25 ( gcc: 6624), nr_events: 4 task 26 ( gcc: 6625), nr_events: 4 task 27 ( gcc: 6626), nr_events: 5 task 28 ( collect2: 6627), nr_events: 5 task 29 ( sh: 6622), nr_events: 1 task 30 ( make: 6628), nr_events: 7 task 31 ( sh: 6630), nr_events: 4 task 32 ( gcc: 6631), nr_events: 4 task 33 ( sh: 6629), nr_events: 1 task 34 ( gcc: 6632), nr_events: 4 task 35 ( gcc: 6633), nr_events: 4 task 36 ( collect2: 6634), nr_events: 4 task 37 ( make: 6635), nr_events: 8 task 38 ( sh: 6637), nr_events: 4 task 39 ( sh: 6636), nr_events: 1 task 40 ( gcc: 6638), nr_events: 4 task 41 ( gcc: 6639), nr_events: 4 task 42 ( gcc: 6640), nr_events: 4 task 43 ( collect2: 6641), nr_events: 4 task 44 ( make: 6642), nr_events: 6 task 45 ( sh: 6643), nr_events: 5 task 46 ( sh: 6644), nr_events: 3 task 47 ( sh: 6645), nr_events: 4 task 48 ( make: 6646), nr_events: 6 task 49 ( sh: 6647), nr_events: 3 task 50 ( make: 6648), nr_events: 5 task 51 ( sh: 6649), nr_events: 5 task 52 ( sh: 6650), nr_events: 6 task 53 ( make: 6651), nr_events: 4 task 54 ( make: 6652), nr_events: 5 task 55 ( make: 6653), nr_events: 4 task 56 ( make: 6654), nr_events: 4 task 57 ( make: 6655), nr_events: 5 task 58 ( sh: 6656), nr_events: 4 task 59 ( gcc: 6657), nr_events: 9 task 60 ( ksoftirqd/3: 10), nr_events: 1 task 61 ( gcc: 6658), nr_events: 4 task 62 ( make: 6659), nr_events: 5 task 63 ( sh: 6660), nr_events: 3 task 64 ( gcc: 6661), nr_events: 5 task 65 ( collect2: 6662), nr_events: 4 ------------------------------------------------------------ #1 : 256.745, ravg: 256.74, cpu: 0.00 / 0.00 #2 : 439.372, ravg: 275.01, cpu: 0.00 / 0.00 #3 : 411.971, ravg: 288.70, cpu: 0.00 / 0.00 #4 : 385.500, ravg: 298.38, cpu: 0.00 / 0.00 #5 : 366.526, ravg: 305.20, cpu: 0.00 / 0.00 #6 : 381.281, ravg: 312.81, cpu: 0.00 / 0.00 #7 : 410.756, ravg: 322.60, cpu: 0.00 / 0.00 #8 : 368.009, ravg: 327.14, cpu: 0.00 / 0.00 #9 : 408.098, ravg: 335.24, cpu: 0.00 / 0.00 #10 : 368.582, ravg: 338.57, cpu: 0.00 / 0.00 I.e. we successfully analyzed the trace, replayed it via real threads and measured the replayed workload's scheduling properties. This is how it looked like in 'top' output: PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 7164 mingo 20 0 1434m 8080 888 R 57.0 0.1 0:02.04 :perf 7165 mingo 20 0 1434m 8080 888 R 41.8 0.1 0:01.52 :perf 7228 mingo 20 0 1434m 8080 888 R 39.8 0.1 0:01.44 :gcc 7225 mingo 20 0 1434m 8080 888 R 33.8 0.1 0:01.26 :gcc 7202 mingo 20 0 1434m 8080 888 R 31.2 0.1 0:01.16 :sh 7222 mingo 20 0 1434m 8080 888 R 25.2 0.1 0:00.96 :sh 7211 mingo 20 0 1434m 8080 888 R 21.9 0.1 0:00.82 :sh 7213 mingo 20 0 1434m 8080 888 D 19.2 0.1 0:00.74 :sh 7194 mingo 20 0 1434m 8080 888 D 18.6 0.1 0:00.72 :make There's still various kinks in it - more patches to come. Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-11 18:12:54 +08:00
add_sched_event_run(sched, prev, timestamp, delta);
perf sched: Don't read all tracepoint variables in advance Do it just at the actual consumer of these fields, that way we avoid needless lookups: [root@sandy ~]# perf sched record sleep 30s [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 8.585 MB perf.data (~375063 samples) ] Before: [root@sandy ~]# perf stat -r 10 perf sched lat > /dev/null Performance counter stats for 'perf sched lat' (10 runs): 103.592215 task-clock # 0.993 CPUs utilized ( +- 0.33% ) 12 context-switches # 0.114 K/sec ( +- 3.29% ) 0 cpu-migrations # 0.000 K/sec 7,605 page-faults # 0.073 M/sec ( +- 0.00% ) 345,796,112 cycles # 3.338 GHz ( +- 0.07% ) [82.90%] 106,876,796 stalled-cycles-frontend # 30.91% frontend cycles idle ( +- 0.38% ) [83.23%] 62,060,877 stalled-cycles-backend # 17.95% backend cycles idle ( +- 0.80% ) [67.14%] 628,246,586 instructions # 1.82 insns per cycle # 0.17 stalled cycles per insn ( +- 0.04% ) [83.64%] 134,962,057 branches # 1302.820 M/sec ( +- 0.10% ) [83.64%] 1,233,037 branch-misses # 0.91% of all branches ( +- 0.29% ) [83.41%] 0.104333272 seconds time elapsed ( +- 0.33% ) [root@sandy ~]# perf stat -r 10 perf sched lat > /dev/null Performance counter stats for 'perf sched lat' (10 runs): 98.848272 task-clock # 0.993 CPUs utilized ( +- 0.48% ) 11 context-switches # 0.112 K/sec ( +- 2.83% ) 0 cpu-migrations # 0.003 K/sec ( +- 50.92% ) 7,604 page-faults # 0.077 M/sec ( +- 0.00% ) 332,216,085 cycles # 3.361 GHz ( +- 0.14% ) [82.87%] 100,623,710 stalled-cycles-frontend # 30.29% frontend cycles idle ( +- 0.53% ) [82.95%] 58,788,692 stalled-cycles-backend # 17.70% backend cycles idle ( +- 0.59% ) [67.15%] 609,402,433 instructions # 1.83 insns per cycle # 0.17 stalled cycles per insn ( +- 0.04% ) [83.76%] 131,277,138 branches # 1328.067 M/sec ( +- 0.06% ) [83.77%] 1,117,871 branch-misses # 0.85% of all branches ( +- 0.32% ) [83.51%] 0.099580430 seconds time elapsed ( +- 0.48% ) [root@sandy ~]# Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Namhyung Kim <namhyung@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-kracdpw8wqlr0xjh75uk8g11@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-09-12 06:29:17 +08:00
add_sched_event_sleep(sched, prev, timestamp, prev_state);
return 0;
perf sched: Implement the scheduling workload replay engine Integrate the schedbench.c bits with the raw trace events that we get from the perf machinery, and activate the workload replayer/simulator. Example of a captured 'make -j' workload: $ perf sched run measurement overhead: 90 nsecs sleep measurement overhead: 2724743 nsecs the run test took 1000081 nsecs the sleep test took 2981111 nsecs version = 0.5 ... nr_run_events: 70 nr_sleep_events: 66 nr_wakeup_events: 9 target-less wakeups: 71 multi-target wakeups: 47 run events optimized: 139 task 0 ( perf: 6607), nr_events: 2 task 1 ( perf: 6608), nr_events: 6 task 2 ( : 0), nr_events: 1 task 3 ( make: 6609), nr_events: 5 task 4 ( sh: 6610), nr_events: 4 task 5 ( make: 6611), nr_events: 6 task 6 ( sh: 6612), nr_events: 4 task 7 ( make: 6613), nr_events: 5 task 8 ( migration/11: 25), nr_events: 1 task 9 ( migration/13: 29), nr_events: 1 task 10 ( migration/15: 33), nr_events: 1 task 11 ( migration/9: 21), nr_events: 1 task 12 ( sh: 6614), nr_events: 4 task 13 ( make: 6615), nr_events: 5 task 14 ( sh: 6616), nr_events: 4 task 15 ( make: 6617), nr_events: 7 task 16 ( migration/3: 9), nr_events: 1 task 17 ( migration/5: 13), nr_events: 1 task 18 ( migration/7: 17), nr_events: 1 task 19 ( migration/1: 5), nr_events: 1 task 20 ( sh: 6618), nr_events: 4 task 21 ( make: 6619), nr_events: 5 task 22 ( sh: 6620), nr_events: 4 task 23 ( make: 6621), nr_events: 10 task 24 ( sh: 6623), nr_events: 3 task 25 ( gcc: 6624), nr_events: 4 task 26 ( gcc: 6625), nr_events: 4 task 27 ( gcc: 6626), nr_events: 5 task 28 ( collect2: 6627), nr_events: 5 task 29 ( sh: 6622), nr_events: 1 task 30 ( make: 6628), nr_events: 7 task 31 ( sh: 6630), nr_events: 4 task 32 ( gcc: 6631), nr_events: 4 task 33 ( sh: 6629), nr_events: 1 task 34 ( gcc: 6632), nr_events: 4 task 35 ( gcc: 6633), nr_events: 4 task 36 ( collect2: 6634), nr_events: 4 task 37 ( make: 6635), nr_events: 8 task 38 ( sh: 6637), nr_events: 4 task 39 ( sh: 6636), nr_events: 1 task 40 ( gcc: 6638), nr_events: 4 task 41 ( gcc: 6639), nr_events: 4 task 42 ( gcc: 6640), nr_events: 4 task 43 ( collect2: 6641), nr_events: 4 task 44 ( make: 6642), nr_events: 6 task 45 ( sh: 6643), nr_events: 5 task 46 ( sh: 6644), nr_events: 3 task 47 ( sh: 6645), nr_events: 4 task 48 ( make: 6646), nr_events: 6 task 49 ( sh: 6647), nr_events: 3 task 50 ( make: 6648), nr_events: 5 task 51 ( sh: 6649), nr_events: 5 task 52 ( sh: 6650), nr_events: 6 task 53 ( make: 6651), nr_events: 4 task 54 ( make: 6652), nr_events: 5 task 55 ( make: 6653), nr_events: 4 task 56 ( make: 6654), nr_events: 4 task 57 ( make: 6655), nr_events: 5 task 58 ( sh: 6656), nr_events: 4 task 59 ( gcc: 6657), nr_events: 9 task 60 ( ksoftirqd/3: 10), nr_events: 1 task 61 ( gcc: 6658), nr_events: 4 task 62 ( make: 6659), nr_events: 5 task 63 ( sh: 6660), nr_events: 3 task 64 ( gcc: 6661), nr_events: 5 task 65 ( collect2: 6662), nr_events: 4 ------------------------------------------------------------ #1 : 256.745, ravg: 256.74, cpu: 0.00 / 0.00 #2 : 439.372, ravg: 275.01, cpu: 0.00 / 0.00 #3 : 411.971, ravg: 288.70, cpu: 0.00 / 0.00 #4 : 385.500, ravg: 298.38, cpu: 0.00 / 0.00 #5 : 366.526, ravg: 305.20, cpu: 0.00 / 0.00 #6 : 381.281, ravg: 312.81, cpu: 0.00 / 0.00 #7 : 410.756, ravg: 322.60, cpu: 0.00 / 0.00 #8 : 368.009, ravg: 327.14, cpu: 0.00 / 0.00 #9 : 408.098, ravg: 335.24, cpu: 0.00 / 0.00 #10 : 368.582, ravg: 338.57, cpu: 0.00 / 0.00 I.e. we successfully analyzed the trace, replayed it via real threads and measured the replayed workload's scheduling properties. This is how it looked like in 'top' output: PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 7164 mingo 20 0 1434m 8080 888 R 57.0 0.1 0:02.04 :perf 7165 mingo 20 0 1434m 8080 888 R 41.8 0.1 0:01.52 :perf 7228 mingo 20 0 1434m 8080 888 R 39.8 0.1 0:01.44 :gcc 7225 mingo 20 0 1434m 8080 888 R 33.8 0.1 0:01.26 :gcc 7202 mingo 20 0 1434m 8080 888 R 31.2 0.1 0:01.16 :sh 7222 mingo 20 0 1434m 8080 888 R 25.2 0.1 0:00.96 :sh 7211 mingo 20 0 1434m 8080 888 R 21.9 0.1 0:00.82 :sh 7213 mingo 20 0 1434m 8080 888 D 19.2 0.1 0:00.74 :sh 7194 mingo 20 0 1434m 8080 888 D 18.6 0.1 0:00.72 :make There's still various kinks in it - more patches to come. Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-11 18:12:54 +08:00
}
static int replay_fork_event(struct perf_sched *sched,
union perf_event *event,
struct machine *machine)
{
struct thread *child, *parent;
child = machine__findnew_thread(machine, event->fork.pid,
event->fork.tid);
parent = machine__findnew_thread(machine, event->fork.ppid,
event->fork.ptid);
if (child == NULL || parent == NULL) {
pr_debug("thread does not exist on fork event: child %p, parent %p\n",
child, parent);
perf machine: Protect the machine->threads with a rwlock In addition to using refcounts for the struct thread lifetime management, we need to protect access to machine->threads from concurrent access. That happens in 'perf top', where a thread processes events, inserting and deleting entries from that rb_tree while another thread decays hist_entries, that end up dropping references and ultimately deleting threads from the rb_tree and releasing its resources when no further hist_entry (or other data structures, like in 'perf sched') references it. So the rule is the same for refcounts + protected trees in the kernel, get the tree lock, find object, bump the refcount, drop the tree lock, return, use object, drop the refcount if no more use of it is needed, keep it if storing it in some other data structure, drop when releasing that data structure. I.e. pair "t = machine__find(new)_thread()" with a "thread__put(t)", and "perf_event__preprocess_sample(&al)" with "addr_location__put(&al)". The addr_location__put() one is because as we return references to several data structures, we may end up adding more reference counting for the other data structures and then we'll drop it at addr_location__put() time. Acked-by: David Ahern <dsahern@gmail.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Borislav Petkov <bp@suse.de> Cc: Don Zickus <dzickus@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-bs9rt4n0jw3hi9f3zxyy3xln@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-04-07 07:43:22 +08:00
goto out_put;
}
perf sched: Don't read all tracepoint variables in advance Do it just at the actual consumer of these fields, that way we avoid needless lookups: [root@sandy ~]# perf sched record sleep 30s [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 8.585 MB perf.data (~375063 samples) ] Before: [root@sandy ~]# perf stat -r 10 perf sched lat > /dev/null Performance counter stats for 'perf sched lat' (10 runs): 103.592215 task-clock # 0.993 CPUs utilized ( +- 0.33% ) 12 context-switches # 0.114 K/sec ( +- 3.29% ) 0 cpu-migrations # 0.000 K/sec 7,605 page-faults # 0.073 M/sec ( +- 0.00% ) 345,796,112 cycles # 3.338 GHz ( +- 0.07% ) [82.90%] 106,876,796 stalled-cycles-frontend # 30.91% frontend cycles idle ( +- 0.38% ) [83.23%] 62,060,877 stalled-cycles-backend # 17.95% backend cycles idle ( +- 0.80% ) [67.14%] 628,246,586 instructions # 1.82 insns per cycle # 0.17 stalled cycles per insn ( +- 0.04% ) [83.64%] 134,962,057 branches # 1302.820 M/sec ( +- 0.10% ) [83.64%] 1,233,037 branch-misses # 0.91% of all branches ( +- 0.29% ) [83.41%] 0.104333272 seconds time elapsed ( +- 0.33% ) [root@sandy ~]# perf stat -r 10 perf sched lat > /dev/null Performance counter stats for 'perf sched lat' (10 runs): 98.848272 task-clock # 0.993 CPUs utilized ( +- 0.48% ) 11 context-switches # 0.112 K/sec ( +- 2.83% ) 0 cpu-migrations # 0.003 K/sec ( +- 50.92% ) 7,604 page-faults # 0.077 M/sec ( +- 0.00% ) 332,216,085 cycles # 3.361 GHz ( +- 0.14% ) [82.87%] 100,623,710 stalled-cycles-frontend # 30.29% frontend cycles idle ( +- 0.53% ) [82.95%] 58,788,692 stalled-cycles-backend # 17.70% backend cycles idle ( +- 0.59% ) [67.15%] 609,402,433 instructions # 1.83 insns per cycle # 0.17 stalled cycles per insn ( +- 0.04% ) [83.76%] 131,277,138 branches # 1328.067 M/sec ( +- 0.06% ) [83.77%] 1,117,871 branch-misses # 0.85% of all branches ( +- 0.32% ) [83.51%] 0.099580430 seconds time elapsed ( +- 0.48% ) [root@sandy ~]# Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Namhyung Kim <namhyung@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-kracdpw8wqlr0xjh75uk8g11@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-09-12 06:29:17 +08:00
if (verbose > 0) {
printf("fork event\n");
printf("... parent: %s/%d\n", thread__comm_str(parent), parent->tid);
printf("... child: %s/%d\n", thread__comm_str(child), child->tid);
}
perf sched: Don't read all tracepoint variables in advance Do it just at the actual consumer of these fields, that way we avoid needless lookups: [root@sandy ~]# perf sched record sleep 30s [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 8.585 MB perf.data (~375063 samples) ] Before: [root@sandy ~]# perf stat -r 10 perf sched lat > /dev/null Performance counter stats for 'perf sched lat' (10 runs): 103.592215 task-clock # 0.993 CPUs utilized ( +- 0.33% ) 12 context-switches # 0.114 K/sec ( +- 3.29% ) 0 cpu-migrations # 0.000 K/sec 7,605 page-faults # 0.073 M/sec ( +- 0.00% ) 345,796,112 cycles # 3.338 GHz ( +- 0.07% ) [82.90%] 106,876,796 stalled-cycles-frontend # 30.91% frontend cycles idle ( +- 0.38% ) [83.23%] 62,060,877 stalled-cycles-backend # 17.95% backend cycles idle ( +- 0.80% ) [67.14%] 628,246,586 instructions # 1.82 insns per cycle # 0.17 stalled cycles per insn ( +- 0.04% ) [83.64%] 134,962,057 branches # 1302.820 M/sec ( +- 0.10% ) [83.64%] 1,233,037 branch-misses # 0.91% of all branches ( +- 0.29% ) [83.41%] 0.104333272 seconds time elapsed ( +- 0.33% ) [root@sandy ~]# perf stat -r 10 perf sched lat > /dev/null Performance counter stats for 'perf sched lat' (10 runs): 98.848272 task-clock # 0.993 CPUs utilized ( +- 0.48% ) 11 context-switches # 0.112 K/sec ( +- 2.83% ) 0 cpu-migrations # 0.003 K/sec ( +- 50.92% ) 7,604 page-faults # 0.077 M/sec ( +- 0.00% ) 332,216,085 cycles # 3.361 GHz ( +- 0.14% ) [82.87%] 100,623,710 stalled-cycles-frontend # 30.29% frontend cycles idle ( +- 0.53% ) [82.95%] 58,788,692 stalled-cycles-backend # 17.70% backend cycles idle ( +- 0.59% ) [67.15%] 609,402,433 instructions # 1.83 insns per cycle # 0.17 stalled cycles per insn ( +- 0.04% ) [83.76%] 131,277,138 branches # 1328.067 M/sec ( +- 0.06% ) [83.77%] 1,117,871 branch-misses # 0.85% of all branches ( +- 0.32% ) [83.51%] 0.099580430 seconds time elapsed ( +- 0.48% ) [root@sandy ~]# Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Namhyung Kim <namhyung@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-kracdpw8wqlr0xjh75uk8g11@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-09-12 06:29:17 +08:00
register_pid(sched, parent->tid, thread__comm_str(parent));
register_pid(sched, child->tid, thread__comm_str(child));
perf machine: Protect the machine->threads with a rwlock In addition to using refcounts for the struct thread lifetime management, we need to protect access to machine->threads from concurrent access. That happens in 'perf top', where a thread processes events, inserting and deleting entries from that rb_tree while another thread decays hist_entries, that end up dropping references and ultimately deleting threads from the rb_tree and releasing its resources when no further hist_entry (or other data structures, like in 'perf sched') references it. So the rule is the same for refcounts + protected trees in the kernel, get the tree lock, find object, bump the refcount, drop the tree lock, return, use object, drop the refcount if no more use of it is needed, keep it if storing it in some other data structure, drop when releasing that data structure. I.e. pair "t = machine__find(new)_thread()" with a "thread__put(t)", and "perf_event__preprocess_sample(&al)" with "addr_location__put(&al)". The addr_location__put() one is because as we return references to several data structures, we may end up adding more reference counting for the other data structures and then we'll drop it at addr_location__put() time. Acked-by: David Ahern <dsahern@gmail.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Borislav Petkov <bp@suse.de> Cc: Don Zickus <dzickus@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-bs9rt4n0jw3hi9f3zxyy3xln@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-04-07 07:43:22 +08:00
out_put:
thread__put(child);
thread__put(parent);
return 0;
}
perf sched: Implement the scheduling workload replay engine Integrate the schedbench.c bits with the raw trace events that we get from the perf machinery, and activate the workload replayer/simulator. Example of a captured 'make -j' workload: $ perf sched run measurement overhead: 90 nsecs sleep measurement overhead: 2724743 nsecs the run test took 1000081 nsecs the sleep test took 2981111 nsecs version = 0.5 ... nr_run_events: 70 nr_sleep_events: 66 nr_wakeup_events: 9 target-less wakeups: 71 multi-target wakeups: 47 run events optimized: 139 task 0 ( perf: 6607), nr_events: 2 task 1 ( perf: 6608), nr_events: 6 task 2 ( : 0), nr_events: 1 task 3 ( make: 6609), nr_events: 5 task 4 ( sh: 6610), nr_events: 4 task 5 ( make: 6611), nr_events: 6 task 6 ( sh: 6612), nr_events: 4 task 7 ( make: 6613), nr_events: 5 task 8 ( migration/11: 25), nr_events: 1 task 9 ( migration/13: 29), nr_events: 1 task 10 ( migration/15: 33), nr_events: 1 task 11 ( migration/9: 21), nr_events: 1 task 12 ( sh: 6614), nr_events: 4 task 13 ( make: 6615), nr_events: 5 task 14 ( sh: 6616), nr_events: 4 task 15 ( make: 6617), nr_events: 7 task 16 ( migration/3: 9), nr_events: 1 task 17 ( migration/5: 13), nr_events: 1 task 18 ( migration/7: 17), nr_events: 1 task 19 ( migration/1: 5), nr_events: 1 task 20 ( sh: 6618), nr_events: 4 task 21 ( make: 6619), nr_events: 5 task 22 ( sh: 6620), nr_events: 4 task 23 ( make: 6621), nr_events: 10 task 24 ( sh: 6623), nr_events: 3 task 25 ( gcc: 6624), nr_events: 4 task 26 ( gcc: 6625), nr_events: 4 task 27 ( gcc: 6626), nr_events: 5 task 28 ( collect2: 6627), nr_events: 5 task 29 ( sh: 6622), nr_events: 1 task 30 ( make: 6628), nr_events: 7 task 31 ( sh: 6630), nr_events: 4 task 32 ( gcc: 6631), nr_events: 4 task 33 ( sh: 6629), nr_events: 1 task 34 ( gcc: 6632), nr_events: 4 task 35 ( gcc: 6633), nr_events: 4 task 36 ( collect2: 6634), nr_events: 4 task 37 ( make: 6635), nr_events: 8 task 38 ( sh: 6637), nr_events: 4 task 39 ( sh: 6636), nr_events: 1 task 40 ( gcc: 6638), nr_events: 4 task 41 ( gcc: 6639), nr_events: 4 task 42 ( gcc: 6640), nr_events: 4 task 43 ( collect2: 6641), nr_events: 4 task 44 ( make: 6642), nr_events: 6 task 45 ( sh: 6643), nr_events: 5 task 46 ( sh: 6644), nr_events: 3 task 47 ( sh: 6645), nr_events: 4 task 48 ( make: 6646), nr_events: 6 task 49 ( sh: 6647), nr_events: 3 task 50 ( make: 6648), nr_events: 5 task 51 ( sh: 6649), nr_events: 5 task 52 ( sh: 6650), nr_events: 6 task 53 ( make: 6651), nr_events: 4 task 54 ( make: 6652), nr_events: 5 task 55 ( make: 6653), nr_events: 4 task 56 ( make: 6654), nr_events: 4 task 57 ( make: 6655), nr_events: 5 task 58 ( sh: 6656), nr_events: 4 task 59 ( gcc: 6657), nr_events: 9 task 60 ( ksoftirqd/3: 10), nr_events: 1 task 61 ( gcc: 6658), nr_events: 4 task 62 ( make: 6659), nr_events: 5 task 63 ( sh: 6660), nr_events: 3 task 64 ( gcc: 6661), nr_events: 5 task 65 ( collect2: 6662), nr_events: 4 ------------------------------------------------------------ #1 : 256.745, ravg: 256.74, cpu: 0.00 / 0.00 #2 : 439.372, ravg: 275.01, cpu: 0.00 / 0.00 #3 : 411.971, ravg: 288.70, cpu: 0.00 / 0.00 #4 : 385.500, ravg: 298.38, cpu: 0.00 / 0.00 #5 : 366.526, ravg: 305.20, cpu: 0.00 / 0.00 #6 : 381.281, ravg: 312.81, cpu: 0.00 / 0.00 #7 : 410.756, ravg: 322.60, cpu: 0.00 / 0.00 #8 : 368.009, ravg: 327.14, cpu: 0.00 / 0.00 #9 : 408.098, ravg: 335.24, cpu: 0.00 / 0.00 #10 : 368.582, ravg: 338.57, cpu: 0.00 / 0.00 I.e. we successfully analyzed the trace, replayed it via real threads and measured the replayed workload's scheduling properties. This is how it looked like in 'top' output: PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 7164 mingo 20 0 1434m 8080 888 R 57.0 0.1 0:02.04 :perf 7165 mingo 20 0 1434m 8080 888 R 41.8 0.1 0:01.52 :perf 7228 mingo 20 0 1434m 8080 888 R 39.8 0.1 0:01.44 :gcc 7225 mingo 20 0 1434m 8080 888 R 33.8 0.1 0:01.26 :gcc 7202 mingo 20 0 1434m 8080 888 R 31.2 0.1 0:01.16 :sh 7222 mingo 20 0 1434m 8080 888 R 25.2 0.1 0:00.96 :sh 7211 mingo 20 0 1434m 8080 888 R 21.9 0.1 0:00.82 :sh 7213 mingo 20 0 1434m 8080 888 D 19.2 0.1 0:00.74 :sh 7194 mingo 20 0 1434m 8080 888 D 18.6 0.1 0:00.72 :make There's still various kinks in it - more patches to come. Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-11 18:12:54 +08:00
struct sort_dimension {
const char *name;
sort_fn_t cmp;
struct list_head list;
};
/*
* handle runtime stats saved per thread
*/
static struct thread_runtime *thread__init_runtime(struct thread *thread)
{
struct thread_runtime *r;
r = zalloc(sizeof(struct thread_runtime));
if (!r)
return NULL;
init_stats(&r->run_stats);
thread__set_priv(thread, r);
return r;
}
static struct thread_runtime *thread__get_runtime(struct thread *thread)
{
struct thread_runtime *tr;
tr = thread__priv(thread);
if (tr == NULL) {
tr = thread__init_runtime(thread);
if (tr == NULL)
pr_debug("Failed to malloc memory for runtime data.\n");
}
return tr;
}
perf sched: Implement multidimensional sorting Implement multidimensional sorting on perf sched so that you can sort either by number of switches, latency average, latency maximum, runtime. perf sched -l -s avg,max (this is the default) ----------------------------------------------------------------------------------- Task | Runtime ms | Switches | Average delay ms | Maximum delay ms | ----------------------------------------------------------------------------------- gnome-power-man | 0.113 ms | 1 | avg: 4998.531 ms | max: 4998.531 ms | xfdesktop | 1.190 ms | 7 | avg: 136.475 ms | max: 940.933 ms | xfce-mcs-manage | 2.194 ms | 22 | avg: 38.534 ms | max: 735.174 ms | notification-da | 2.749 ms | 31 | avg: 27.436 ms | max: 731.791 ms | xfce4-session | 3.343 ms | 28 | avg: 26.796 ms | max: 734.891 ms | xfwm4 | 3.159 ms | 22 | avg: 12.406 ms | max: 241.333 ms | xchat | 42.789 ms | 214 | avg: 11.886 ms | max: 100.349 ms | xfce4-terminal | 5.386 ms | 22 | avg: 11.414 ms | max: 241.611 ms | firefox | 151.992 ms | 123 | avg: 9.543 ms | max: 153.717 ms | xfce4-panel | 24.324 ms | 47 | avg: 8.189 ms | max: 242.352 ms | :5090 | 6.932 ms | 111 | avg: 8.131 ms | max: 102.665 ms | events/0 | 0.758 ms | 12 | avg: 1.964 ms | max: 21.879 ms | Xorg | 280.558 ms | 340 | avg: 1.864 ms | max: 99.526 ms | geany | 63.391 ms | 295 | avg: 1.099 ms | max: 9.334 ms | reiserfs/0 | 0.039 ms | 2 | avg: 0.854 ms | max: 1.487 ms | kondemand/0 | 8.251 ms | 245 | avg: 0.691 ms | max: 34.372 ms | Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-13 09:36:29 +08:00
static int
perf sched: Add support for sched:sched_stat_runtime events This allows more precise 'perf sched latency' output: --------------------------------------------------------------------------------------- Task | Runtime ms | Switches | Average delay ms | Maximum delay ms | --------------------------------------------------------------------------------------- ksoftirqd/0-4 | 0.010 ms | 2 | avg: 2.476 ms | max: 2.977 ms | perf-12328 | 15.844 ms | 66 | avg: 1.118 ms | max: 9.979 ms | bdi-default-235 | 0.009 ms | 1 | avg: 0.998 ms | max: 0.998 ms | events/1-8 | 0.020 ms | 2 | avg: 0.998 ms | max: 0.998 ms | events/0-7 | 0.018 ms | 2 | avg: 0.992 ms | max: 0.996 ms | sleep-12329 | 0.742 ms | 3 | avg: 0.906 ms | max: 2.289 ms | sshd-12122 | 0.163 ms | 2 | avg: 0.283 ms | max: 0.562 ms | loop-getpid-lon-12322 | 1023.636 ms | 69 | avg: 0.208 ms | max: 5.996 ms | loop-getpid-lon-12321 | 1038.638 ms | 5 | avg: 0.073 ms | max: 0.171 ms | migration/1-5 | 0.000 ms | 1 | avg: 0.006 ms | max: 0.006 ms | --------------------------------------------------------------------------------------- TOTAL: | 2079.078 ms | 153 | ------------------------------------------------- Also, streamline the code a bit more, add asserts for various state machine failures (they should be debugged if they occur) and fix a few odd ends. Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-15 02:04:48 +08:00
thread_lat_cmp(struct list_head *list, struct work_atoms *l, struct work_atoms *r)
perf sched: Implement multidimensional sorting Implement multidimensional sorting on perf sched so that you can sort either by number of switches, latency average, latency maximum, runtime. perf sched -l -s avg,max (this is the default) ----------------------------------------------------------------------------------- Task | Runtime ms | Switches | Average delay ms | Maximum delay ms | ----------------------------------------------------------------------------------- gnome-power-man | 0.113 ms | 1 | avg: 4998.531 ms | max: 4998.531 ms | xfdesktop | 1.190 ms | 7 | avg: 136.475 ms | max: 940.933 ms | xfce-mcs-manage | 2.194 ms | 22 | avg: 38.534 ms | max: 735.174 ms | notification-da | 2.749 ms | 31 | avg: 27.436 ms | max: 731.791 ms | xfce4-session | 3.343 ms | 28 | avg: 26.796 ms | max: 734.891 ms | xfwm4 | 3.159 ms | 22 | avg: 12.406 ms | max: 241.333 ms | xchat | 42.789 ms | 214 | avg: 11.886 ms | max: 100.349 ms | xfce4-terminal | 5.386 ms | 22 | avg: 11.414 ms | max: 241.611 ms | firefox | 151.992 ms | 123 | avg: 9.543 ms | max: 153.717 ms | xfce4-panel | 24.324 ms | 47 | avg: 8.189 ms | max: 242.352 ms | :5090 | 6.932 ms | 111 | avg: 8.131 ms | max: 102.665 ms | events/0 | 0.758 ms | 12 | avg: 1.964 ms | max: 21.879 ms | Xorg | 280.558 ms | 340 | avg: 1.864 ms | max: 99.526 ms | geany | 63.391 ms | 295 | avg: 1.099 ms | max: 9.334 ms | reiserfs/0 | 0.039 ms | 2 | avg: 0.854 ms | max: 1.487 ms | kondemand/0 | 8.251 ms | 245 | avg: 0.691 ms | max: 34.372 ms | Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-13 09:36:29 +08:00
{
struct sort_dimension *sort;
int ret = 0;
BUG_ON(list_empty(list));
perf sched: Implement multidimensional sorting Implement multidimensional sorting on perf sched so that you can sort either by number of switches, latency average, latency maximum, runtime. perf sched -l -s avg,max (this is the default) ----------------------------------------------------------------------------------- Task | Runtime ms | Switches | Average delay ms | Maximum delay ms | ----------------------------------------------------------------------------------- gnome-power-man | 0.113 ms | 1 | avg: 4998.531 ms | max: 4998.531 ms | xfdesktop | 1.190 ms | 7 | avg: 136.475 ms | max: 940.933 ms | xfce-mcs-manage | 2.194 ms | 22 | avg: 38.534 ms | max: 735.174 ms | notification-da | 2.749 ms | 31 | avg: 27.436 ms | max: 731.791 ms | xfce4-session | 3.343 ms | 28 | avg: 26.796 ms | max: 734.891 ms | xfwm4 | 3.159 ms | 22 | avg: 12.406 ms | max: 241.333 ms | xchat | 42.789 ms | 214 | avg: 11.886 ms | max: 100.349 ms | xfce4-terminal | 5.386 ms | 22 | avg: 11.414 ms | max: 241.611 ms | firefox | 151.992 ms | 123 | avg: 9.543 ms | max: 153.717 ms | xfce4-panel | 24.324 ms | 47 | avg: 8.189 ms | max: 242.352 ms | :5090 | 6.932 ms | 111 | avg: 8.131 ms | max: 102.665 ms | events/0 | 0.758 ms | 12 | avg: 1.964 ms | max: 21.879 ms | Xorg | 280.558 ms | 340 | avg: 1.864 ms | max: 99.526 ms | geany | 63.391 ms | 295 | avg: 1.099 ms | max: 9.334 ms | reiserfs/0 | 0.039 ms | 2 | avg: 0.854 ms | max: 1.487 ms | kondemand/0 | 8.251 ms | 245 | avg: 0.691 ms | max: 34.372 ms | Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-13 09:36:29 +08:00
list_for_each_entry(sort, list, list) {
ret = sort->cmp(l, r);
if (ret)
return ret;
}
return ret;
}
perf sched: Add support for sched:sched_stat_runtime events This allows more precise 'perf sched latency' output: --------------------------------------------------------------------------------------- Task | Runtime ms | Switches | Average delay ms | Maximum delay ms | --------------------------------------------------------------------------------------- ksoftirqd/0-4 | 0.010 ms | 2 | avg: 2.476 ms | max: 2.977 ms | perf-12328 | 15.844 ms | 66 | avg: 1.118 ms | max: 9.979 ms | bdi-default-235 | 0.009 ms | 1 | avg: 0.998 ms | max: 0.998 ms | events/1-8 | 0.020 ms | 2 | avg: 0.998 ms | max: 0.998 ms | events/0-7 | 0.018 ms | 2 | avg: 0.992 ms | max: 0.996 ms | sleep-12329 | 0.742 ms | 3 | avg: 0.906 ms | max: 2.289 ms | sshd-12122 | 0.163 ms | 2 | avg: 0.283 ms | max: 0.562 ms | loop-getpid-lon-12322 | 1023.636 ms | 69 | avg: 0.208 ms | max: 5.996 ms | loop-getpid-lon-12321 | 1038.638 ms | 5 | avg: 0.073 ms | max: 0.171 ms | migration/1-5 | 0.000 ms | 1 | avg: 0.006 ms | max: 0.006 ms | --------------------------------------------------------------------------------------- TOTAL: | 2079.078 ms | 153 | ------------------------------------------------- Also, streamline the code a bit more, add asserts for various state machine failures (they should be debugged if they occur) and fix a few odd ends. Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-15 02:04:48 +08:00
static struct work_atoms *
thread_atoms_search(struct rb_root_cached *root, struct thread *thread,
struct list_head *sort_list)
{
struct rb_node *node = root->rb_root.rb_node;
perf sched: Add support for sched:sched_stat_runtime events This allows more precise 'perf sched latency' output: --------------------------------------------------------------------------------------- Task | Runtime ms | Switches | Average delay ms | Maximum delay ms | --------------------------------------------------------------------------------------- ksoftirqd/0-4 | 0.010 ms | 2 | avg: 2.476 ms | max: 2.977 ms | perf-12328 | 15.844 ms | 66 | avg: 1.118 ms | max: 9.979 ms | bdi-default-235 | 0.009 ms | 1 | avg: 0.998 ms | max: 0.998 ms | events/1-8 | 0.020 ms | 2 | avg: 0.998 ms | max: 0.998 ms | events/0-7 | 0.018 ms | 2 | avg: 0.992 ms | max: 0.996 ms | sleep-12329 | 0.742 ms | 3 | avg: 0.906 ms | max: 2.289 ms | sshd-12122 | 0.163 ms | 2 | avg: 0.283 ms | max: 0.562 ms | loop-getpid-lon-12322 | 1023.636 ms | 69 | avg: 0.208 ms | max: 5.996 ms | loop-getpid-lon-12321 | 1038.638 ms | 5 | avg: 0.073 ms | max: 0.171 ms | migration/1-5 | 0.000 ms | 1 | avg: 0.006 ms | max: 0.006 ms | --------------------------------------------------------------------------------------- TOTAL: | 2079.078 ms | 153 | ------------------------------------------------- Also, streamline the code a bit more, add asserts for various state machine failures (they should be debugged if they occur) and fix a few odd ends. Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-15 02:04:48 +08:00
struct work_atoms key = { .thread = thread };
while (node) {
perf sched: Add support for sched:sched_stat_runtime events This allows more precise 'perf sched latency' output: --------------------------------------------------------------------------------------- Task | Runtime ms | Switches | Average delay ms | Maximum delay ms | --------------------------------------------------------------------------------------- ksoftirqd/0-4 | 0.010 ms | 2 | avg: 2.476 ms | max: 2.977 ms | perf-12328 | 15.844 ms | 66 | avg: 1.118 ms | max: 9.979 ms | bdi-default-235 | 0.009 ms | 1 | avg: 0.998 ms | max: 0.998 ms | events/1-8 | 0.020 ms | 2 | avg: 0.998 ms | max: 0.998 ms | events/0-7 | 0.018 ms | 2 | avg: 0.992 ms | max: 0.996 ms | sleep-12329 | 0.742 ms | 3 | avg: 0.906 ms | max: 2.289 ms | sshd-12122 | 0.163 ms | 2 | avg: 0.283 ms | max: 0.562 ms | loop-getpid-lon-12322 | 1023.636 ms | 69 | avg: 0.208 ms | max: 5.996 ms | loop-getpid-lon-12321 | 1038.638 ms | 5 | avg: 0.073 ms | max: 0.171 ms | migration/1-5 | 0.000 ms | 1 | avg: 0.006 ms | max: 0.006 ms | --------------------------------------------------------------------------------------- TOTAL: | 2079.078 ms | 153 | ------------------------------------------------- Also, streamline the code a bit more, add asserts for various state machine failures (they should be debugged if they occur) and fix a few odd ends. Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-15 02:04:48 +08:00
struct work_atoms *atoms;
int cmp;
perf sched: Add support for sched:sched_stat_runtime events This allows more precise 'perf sched latency' output: --------------------------------------------------------------------------------------- Task | Runtime ms | Switches | Average delay ms | Maximum delay ms | --------------------------------------------------------------------------------------- ksoftirqd/0-4 | 0.010 ms | 2 | avg: 2.476 ms | max: 2.977 ms | perf-12328 | 15.844 ms | 66 | avg: 1.118 ms | max: 9.979 ms | bdi-default-235 | 0.009 ms | 1 | avg: 0.998 ms | max: 0.998 ms | events/1-8 | 0.020 ms | 2 | avg: 0.998 ms | max: 0.998 ms | events/0-7 | 0.018 ms | 2 | avg: 0.992 ms | max: 0.996 ms | sleep-12329 | 0.742 ms | 3 | avg: 0.906 ms | max: 2.289 ms | sshd-12122 | 0.163 ms | 2 | avg: 0.283 ms | max: 0.562 ms | loop-getpid-lon-12322 | 1023.636 ms | 69 | avg: 0.208 ms | max: 5.996 ms | loop-getpid-lon-12321 | 1038.638 ms | 5 | avg: 0.073 ms | max: 0.171 ms | migration/1-5 | 0.000 ms | 1 | avg: 0.006 ms | max: 0.006 ms | --------------------------------------------------------------------------------------- TOTAL: | 2079.078 ms | 153 | ------------------------------------------------- Also, streamline the code a bit more, add asserts for various state machine failures (they should be debugged if they occur) and fix a few odd ends. Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-15 02:04:48 +08:00
atoms = container_of(node, struct work_atoms, node);
cmp = thread_lat_cmp(sort_list, &key, atoms);
if (cmp > 0)
node = node->rb_left;
else if (cmp < 0)
node = node->rb_right;
else {
BUG_ON(thread != atoms->thread);
return atoms;
}
}
return NULL;
}
static void
__thread_latency_insert(struct rb_root_cached *root, struct work_atoms *data,
perf sched: Implement multidimensional sorting Implement multidimensional sorting on perf sched so that you can sort either by number of switches, latency average, latency maximum, runtime. perf sched -l -s avg,max (this is the default) ----------------------------------------------------------------------------------- Task | Runtime ms | Switches | Average delay ms | Maximum delay ms | ----------------------------------------------------------------------------------- gnome-power-man | 0.113 ms | 1 | avg: 4998.531 ms | max: 4998.531 ms | xfdesktop | 1.190 ms | 7 | avg: 136.475 ms | max: 940.933 ms | xfce-mcs-manage | 2.194 ms | 22 | avg: 38.534 ms | max: 735.174 ms | notification-da | 2.749 ms | 31 | avg: 27.436 ms | max: 731.791 ms | xfce4-session | 3.343 ms | 28 | avg: 26.796 ms | max: 734.891 ms | xfwm4 | 3.159 ms | 22 | avg: 12.406 ms | max: 241.333 ms | xchat | 42.789 ms | 214 | avg: 11.886 ms | max: 100.349 ms | xfce4-terminal | 5.386 ms | 22 | avg: 11.414 ms | max: 241.611 ms | firefox | 151.992 ms | 123 | avg: 9.543 ms | max: 153.717 ms | xfce4-panel | 24.324 ms | 47 | avg: 8.189 ms | max: 242.352 ms | :5090 | 6.932 ms | 111 | avg: 8.131 ms | max: 102.665 ms | events/0 | 0.758 ms | 12 | avg: 1.964 ms | max: 21.879 ms | Xorg | 280.558 ms | 340 | avg: 1.864 ms | max: 99.526 ms | geany | 63.391 ms | 295 | avg: 1.099 ms | max: 9.334 ms | reiserfs/0 | 0.039 ms | 2 | avg: 0.854 ms | max: 1.487 ms | kondemand/0 | 8.251 ms | 245 | avg: 0.691 ms | max: 34.372 ms | Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-13 09:36:29 +08:00
struct list_head *sort_list)
{
struct rb_node **new = &(root->rb_root.rb_node), *parent = NULL;
bool leftmost = true;
while (*new) {
perf sched: Add support for sched:sched_stat_runtime events This allows more precise 'perf sched latency' output: --------------------------------------------------------------------------------------- Task | Runtime ms | Switches | Average delay ms | Maximum delay ms | --------------------------------------------------------------------------------------- ksoftirqd/0-4 | 0.010 ms | 2 | avg: 2.476 ms | max: 2.977 ms | perf-12328 | 15.844 ms | 66 | avg: 1.118 ms | max: 9.979 ms | bdi-default-235 | 0.009 ms | 1 | avg: 0.998 ms | max: 0.998 ms | events/1-8 | 0.020 ms | 2 | avg: 0.998 ms | max: 0.998 ms | events/0-7 | 0.018 ms | 2 | avg: 0.992 ms | max: 0.996 ms | sleep-12329 | 0.742 ms | 3 | avg: 0.906 ms | max: 2.289 ms | sshd-12122 | 0.163 ms | 2 | avg: 0.283 ms | max: 0.562 ms | loop-getpid-lon-12322 | 1023.636 ms | 69 | avg: 0.208 ms | max: 5.996 ms | loop-getpid-lon-12321 | 1038.638 ms | 5 | avg: 0.073 ms | max: 0.171 ms | migration/1-5 | 0.000 ms | 1 | avg: 0.006 ms | max: 0.006 ms | --------------------------------------------------------------------------------------- TOTAL: | 2079.078 ms | 153 | ------------------------------------------------- Also, streamline the code a bit more, add asserts for various state machine failures (they should be debugged if they occur) and fix a few odd ends. Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-15 02:04:48 +08:00
struct work_atoms *this;
perf sched: Implement multidimensional sorting Implement multidimensional sorting on perf sched so that you can sort either by number of switches, latency average, latency maximum, runtime. perf sched -l -s avg,max (this is the default) ----------------------------------------------------------------------------------- Task | Runtime ms | Switches | Average delay ms | Maximum delay ms | ----------------------------------------------------------------------------------- gnome-power-man | 0.113 ms | 1 | avg: 4998.531 ms | max: 4998.531 ms | xfdesktop | 1.190 ms | 7 | avg: 136.475 ms | max: 940.933 ms | xfce-mcs-manage | 2.194 ms | 22 | avg: 38.534 ms | max: 735.174 ms | notification-da | 2.749 ms | 31 | avg: 27.436 ms | max: 731.791 ms | xfce4-session | 3.343 ms | 28 | avg: 26.796 ms | max: 734.891 ms | xfwm4 | 3.159 ms | 22 | avg: 12.406 ms | max: 241.333 ms | xchat | 42.789 ms | 214 | avg: 11.886 ms | max: 100.349 ms | xfce4-terminal | 5.386 ms | 22 | avg: 11.414 ms | max: 241.611 ms | firefox | 151.992 ms | 123 | avg: 9.543 ms | max: 153.717 ms | xfce4-panel | 24.324 ms | 47 | avg: 8.189 ms | max: 242.352 ms | :5090 | 6.932 ms | 111 | avg: 8.131 ms | max: 102.665 ms | events/0 | 0.758 ms | 12 | avg: 1.964 ms | max: 21.879 ms | Xorg | 280.558 ms | 340 | avg: 1.864 ms | max: 99.526 ms | geany | 63.391 ms | 295 | avg: 1.099 ms | max: 9.334 ms | reiserfs/0 | 0.039 ms | 2 | avg: 0.854 ms | max: 1.487 ms | kondemand/0 | 8.251 ms | 245 | avg: 0.691 ms | max: 34.372 ms | Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-13 09:36:29 +08:00
int cmp;
perf sched: Add support for sched:sched_stat_runtime events This allows more precise 'perf sched latency' output: --------------------------------------------------------------------------------------- Task | Runtime ms | Switches | Average delay ms | Maximum delay ms | --------------------------------------------------------------------------------------- ksoftirqd/0-4 | 0.010 ms | 2 | avg: 2.476 ms | max: 2.977 ms | perf-12328 | 15.844 ms | 66 | avg: 1.118 ms | max: 9.979 ms | bdi-default-235 | 0.009 ms | 1 | avg: 0.998 ms | max: 0.998 ms | events/1-8 | 0.020 ms | 2 | avg: 0.998 ms | max: 0.998 ms | events/0-7 | 0.018 ms | 2 | avg: 0.992 ms | max: 0.996 ms | sleep-12329 | 0.742 ms | 3 | avg: 0.906 ms | max: 2.289 ms | sshd-12122 | 0.163 ms | 2 | avg: 0.283 ms | max: 0.562 ms | loop-getpid-lon-12322 | 1023.636 ms | 69 | avg: 0.208 ms | max: 5.996 ms | loop-getpid-lon-12321 | 1038.638 ms | 5 | avg: 0.073 ms | max: 0.171 ms | migration/1-5 | 0.000 ms | 1 | avg: 0.006 ms | max: 0.006 ms | --------------------------------------------------------------------------------------- TOTAL: | 2079.078 ms | 153 | ------------------------------------------------- Also, streamline the code a bit more, add asserts for various state machine failures (they should be debugged if they occur) and fix a few odd ends. Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-15 02:04:48 +08:00
this = container_of(*new, struct work_atoms, node);
parent = *new;
perf sched: Implement multidimensional sorting Implement multidimensional sorting on perf sched so that you can sort either by number of switches, latency average, latency maximum, runtime. perf sched -l -s avg,max (this is the default) ----------------------------------------------------------------------------------- Task | Runtime ms | Switches | Average delay ms | Maximum delay ms | ----------------------------------------------------------------------------------- gnome-power-man | 0.113 ms | 1 | avg: 4998.531 ms | max: 4998.531 ms | xfdesktop | 1.190 ms | 7 | avg: 136.475 ms | max: 940.933 ms | xfce-mcs-manage | 2.194 ms | 22 | avg: 38.534 ms | max: 735.174 ms | notification-da | 2.749 ms | 31 | avg: 27.436 ms | max: 731.791 ms | xfce4-session | 3.343 ms | 28 | avg: 26.796 ms | max: 734.891 ms | xfwm4 | 3.159 ms | 22 | avg: 12.406 ms | max: 241.333 ms | xchat | 42.789 ms | 214 | avg: 11.886 ms | max: 100.349 ms | xfce4-terminal | 5.386 ms | 22 | avg: 11.414 ms | max: 241.611 ms | firefox | 151.992 ms | 123 | avg: 9.543 ms | max: 153.717 ms | xfce4-panel | 24.324 ms | 47 | avg: 8.189 ms | max: 242.352 ms | :5090 | 6.932 ms | 111 | avg: 8.131 ms | max: 102.665 ms | events/0 | 0.758 ms | 12 | avg: 1.964 ms | max: 21.879 ms | Xorg | 280.558 ms | 340 | avg: 1.864 ms | max: 99.526 ms | geany | 63.391 ms | 295 | avg: 1.099 ms | max: 9.334 ms | reiserfs/0 | 0.039 ms | 2 | avg: 0.854 ms | max: 1.487 ms | kondemand/0 | 8.251 ms | 245 | avg: 0.691 ms | max: 34.372 ms | Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-13 09:36:29 +08:00
cmp = thread_lat_cmp(sort_list, data, this);
if (cmp > 0)
new = &((*new)->rb_left);
else {
perf sched: Implement multidimensional sorting Implement multidimensional sorting on perf sched so that you can sort either by number of switches, latency average, latency maximum, runtime. perf sched -l -s avg,max (this is the default) ----------------------------------------------------------------------------------- Task | Runtime ms | Switches | Average delay ms | Maximum delay ms | ----------------------------------------------------------------------------------- gnome-power-man | 0.113 ms | 1 | avg: 4998.531 ms | max: 4998.531 ms | xfdesktop | 1.190 ms | 7 | avg: 136.475 ms | max: 940.933 ms | xfce-mcs-manage | 2.194 ms | 22 | avg: 38.534 ms | max: 735.174 ms | notification-da | 2.749 ms | 31 | avg: 27.436 ms | max: 731.791 ms | xfce4-session | 3.343 ms | 28 | avg: 26.796 ms | max: 734.891 ms | xfwm4 | 3.159 ms | 22 | avg: 12.406 ms | max: 241.333 ms | xchat | 42.789 ms | 214 | avg: 11.886 ms | max: 100.349 ms | xfce4-terminal | 5.386 ms | 22 | avg: 11.414 ms | max: 241.611 ms | firefox | 151.992 ms | 123 | avg: 9.543 ms | max: 153.717 ms | xfce4-panel | 24.324 ms | 47 | avg: 8.189 ms | max: 242.352 ms | :5090 | 6.932 ms | 111 | avg: 8.131 ms | max: 102.665 ms | events/0 | 0.758 ms | 12 | avg: 1.964 ms | max: 21.879 ms | Xorg | 280.558 ms | 340 | avg: 1.864 ms | max: 99.526 ms | geany | 63.391 ms | 295 | avg: 1.099 ms | max: 9.334 ms | reiserfs/0 | 0.039 ms | 2 | avg: 0.854 ms | max: 1.487 ms | kondemand/0 | 8.251 ms | 245 | avg: 0.691 ms | max: 34.372 ms | Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-13 09:36:29 +08:00
new = &((*new)->rb_right);
leftmost = false;
}
}
rb_link_node(&data->node, parent, new);
rb_insert_color_cached(&data->node, root, leftmost);
}
static int thread_atoms_insert(struct perf_sched *sched, struct thread *thread)
{
struct work_atoms *atoms = zalloc(sizeof(*atoms));
if (!atoms) {
pr_err("No memory at %s\n", __func__);
return -1;
}
atoms->thread = thread__get(thread);
perf sched: Add support for sched:sched_stat_runtime events This allows more precise 'perf sched latency' output: --------------------------------------------------------------------------------------- Task | Runtime ms | Switches | Average delay ms | Maximum delay ms | --------------------------------------------------------------------------------------- ksoftirqd/0-4 | 0.010 ms | 2 | avg: 2.476 ms | max: 2.977 ms | perf-12328 | 15.844 ms | 66 | avg: 1.118 ms | max: 9.979 ms | bdi-default-235 | 0.009 ms | 1 | avg: 0.998 ms | max: 0.998 ms | events/1-8 | 0.020 ms | 2 | avg: 0.998 ms | max: 0.998 ms | events/0-7 | 0.018 ms | 2 | avg: 0.992 ms | max: 0.996 ms | sleep-12329 | 0.742 ms | 3 | avg: 0.906 ms | max: 2.289 ms | sshd-12122 | 0.163 ms | 2 | avg: 0.283 ms | max: 0.562 ms | loop-getpid-lon-12322 | 1023.636 ms | 69 | avg: 0.208 ms | max: 5.996 ms | loop-getpid-lon-12321 | 1038.638 ms | 5 | avg: 0.073 ms | max: 0.171 ms | migration/1-5 | 0.000 ms | 1 | avg: 0.006 ms | max: 0.006 ms | --------------------------------------------------------------------------------------- TOTAL: | 2079.078 ms | 153 | ------------------------------------------------- Also, streamline the code a bit more, add asserts for various state machine failures (they should be debugged if they occur) and fix a few odd ends. Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-15 02:04:48 +08:00
INIT_LIST_HEAD(&atoms->work_list);
__thread_latency_insert(&sched->atom_root, atoms, &sched->cmp_pid);
return 0;
}
perf sched: Don't read all tracepoint variables in advance Do it just at the actual consumer of these fields, that way we avoid needless lookups: [root@sandy ~]# perf sched record sleep 30s [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 8.585 MB perf.data (~375063 samples) ] Before: [root@sandy ~]# perf stat -r 10 perf sched lat > /dev/null Performance counter stats for 'perf sched lat' (10 runs): 103.592215 task-clock # 0.993 CPUs utilized ( +- 0.33% ) 12 context-switches # 0.114 K/sec ( +- 3.29% ) 0 cpu-migrations # 0.000 K/sec 7,605 page-faults # 0.073 M/sec ( +- 0.00% ) 345,796,112 cycles # 3.338 GHz ( +- 0.07% ) [82.90%] 106,876,796 stalled-cycles-frontend # 30.91% frontend cycles idle ( +- 0.38% ) [83.23%] 62,060,877 stalled-cycles-backend # 17.95% backend cycles idle ( +- 0.80% ) [67.14%] 628,246,586 instructions # 1.82 insns per cycle # 0.17 stalled cycles per insn ( +- 0.04% ) [83.64%] 134,962,057 branches # 1302.820 M/sec ( +- 0.10% ) [83.64%] 1,233,037 branch-misses # 0.91% of all branches ( +- 0.29% ) [83.41%] 0.104333272 seconds time elapsed ( +- 0.33% ) [root@sandy ~]# perf stat -r 10 perf sched lat > /dev/null Performance counter stats for 'perf sched lat' (10 runs): 98.848272 task-clock # 0.993 CPUs utilized ( +- 0.48% ) 11 context-switches # 0.112 K/sec ( +- 2.83% ) 0 cpu-migrations # 0.003 K/sec ( +- 50.92% ) 7,604 page-faults # 0.077 M/sec ( +- 0.00% ) 332,216,085 cycles # 3.361 GHz ( +- 0.14% ) [82.87%] 100,623,710 stalled-cycles-frontend # 30.29% frontend cycles idle ( +- 0.53% ) [82.95%] 58,788,692 stalled-cycles-backend # 17.70% backend cycles idle ( +- 0.59% ) [67.15%] 609,402,433 instructions # 1.83 insns per cycle # 0.17 stalled cycles per insn ( +- 0.04% ) [83.76%] 131,277,138 branches # 1328.067 M/sec ( +- 0.06% ) [83.77%] 1,117,871 branch-misses # 0.85% of all branches ( +- 0.32% ) [83.51%] 0.099580430 seconds time elapsed ( +- 0.48% ) [root@sandy ~]# Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Namhyung Kim <namhyung@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-kracdpw8wqlr0xjh75uk8g11@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-09-12 06:29:17 +08:00
static char sched_out_state(u64 prev_state)
{
const char *str = TASK_STATE_TO_CHAR_STR;
perf sched: Don't read all tracepoint variables in advance Do it just at the actual consumer of these fields, that way we avoid needless lookups: [root@sandy ~]# perf sched record sleep 30s [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 8.585 MB perf.data (~375063 samples) ] Before: [root@sandy ~]# perf stat -r 10 perf sched lat > /dev/null Performance counter stats for 'perf sched lat' (10 runs): 103.592215 task-clock # 0.993 CPUs utilized ( +- 0.33% ) 12 context-switches # 0.114 K/sec ( +- 3.29% ) 0 cpu-migrations # 0.000 K/sec 7,605 page-faults # 0.073 M/sec ( +- 0.00% ) 345,796,112 cycles # 3.338 GHz ( +- 0.07% ) [82.90%] 106,876,796 stalled-cycles-frontend # 30.91% frontend cycles idle ( +- 0.38% ) [83.23%] 62,060,877 stalled-cycles-backend # 17.95% backend cycles idle ( +- 0.80% ) [67.14%] 628,246,586 instructions # 1.82 insns per cycle # 0.17 stalled cycles per insn ( +- 0.04% ) [83.64%] 134,962,057 branches # 1302.820 M/sec ( +- 0.10% ) [83.64%] 1,233,037 branch-misses # 0.91% of all branches ( +- 0.29% ) [83.41%] 0.104333272 seconds time elapsed ( +- 0.33% ) [root@sandy ~]# perf stat -r 10 perf sched lat > /dev/null Performance counter stats for 'perf sched lat' (10 runs): 98.848272 task-clock # 0.993 CPUs utilized ( +- 0.48% ) 11 context-switches # 0.112 K/sec ( +- 2.83% ) 0 cpu-migrations # 0.003 K/sec ( +- 50.92% ) 7,604 page-faults # 0.077 M/sec ( +- 0.00% ) 332,216,085 cycles # 3.361 GHz ( +- 0.14% ) [82.87%] 100,623,710 stalled-cycles-frontend # 30.29% frontend cycles idle ( +- 0.53% ) [82.95%] 58,788,692 stalled-cycles-backend # 17.70% backend cycles idle ( +- 0.59% ) [67.15%] 609,402,433 instructions # 1.83 insns per cycle # 0.17 stalled cycles per insn ( +- 0.04% ) [83.76%] 131,277,138 branches # 1328.067 M/sec ( +- 0.06% ) [83.77%] 1,117,871 branch-misses # 0.85% of all branches ( +- 0.32% ) [83.51%] 0.099580430 seconds time elapsed ( +- 0.48% ) [root@sandy ~]# Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Namhyung Kim <namhyung@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-kracdpw8wqlr0xjh75uk8g11@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-09-12 06:29:17 +08:00
return str[prev_state];
}
static int
perf sched: Add support for sched:sched_stat_runtime events This allows more precise 'perf sched latency' output: --------------------------------------------------------------------------------------- Task | Runtime ms | Switches | Average delay ms | Maximum delay ms | --------------------------------------------------------------------------------------- ksoftirqd/0-4 | 0.010 ms | 2 | avg: 2.476 ms | max: 2.977 ms | perf-12328 | 15.844 ms | 66 | avg: 1.118 ms | max: 9.979 ms | bdi-default-235 | 0.009 ms | 1 | avg: 0.998 ms | max: 0.998 ms | events/1-8 | 0.020 ms | 2 | avg: 0.998 ms | max: 0.998 ms | events/0-7 | 0.018 ms | 2 | avg: 0.992 ms | max: 0.996 ms | sleep-12329 | 0.742 ms | 3 | avg: 0.906 ms | max: 2.289 ms | sshd-12122 | 0.163 ms | 2 | avg: 0.283 ms | max: 0.562 ms | loop-getpid-lon-12322 | 1023.636 ms | 69 | avg: 0.208 ms | max: 5.996 ms | loop-getpid-lon-12321 | 1038.638 ms | 5 | avg: 0.073 ms | max: 0.171 ms | migration/1-5 | 0.000 ms | 1 | avg: 0.006 ms | max: 0.006 ms | --------------------------------------------------------------------------------------- TOTAL: | 2079.078 ms | 153 | ------------------------------------------------- Also, streamline the code a bit more, add asserts for various state machine failures (they should be debugged if they occur) and fix a few odd ends. Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-15 02:04:48 +08:00
add_sched_out_event(struct work_atoms *atoms,
char run_state,
u64 timestamp)
{
struct work_atom *atom = zalloc(sizeof(*atom));
if (!atom) {
pr_err("Non memory at %s", __func__);
return -1;
}
perf tools: Fix processing of randomly serialized sched traces Currently it's possible to meet such too high latency results with 'perf sched latency'. ----------------------------------------------------------------------------------- Task | Runtime ms | Switches | Average delay ms | Maximum delay ms | ----------------------------------------------------------------------------------- xfce4-panel | 0.222 ms | 2 | avg: 4718.345 ms | max: 9436.493 ms | scsi_eh_3 | 3.962 ms | 36 | avg: 55.957 ms | max: 1977.829 ms | The origin is on traces that are sometimes badly serialized across cpus. For example the raw traces that raised such results for xfce4-panel: (1) [init]-0 [000] 1494.663899990: sched_switch: task swapper:0 [140] (R) ==> xfce4-panel:4569 [120] (2) xfce4-panel-4569 [000] 1494.663928373: sched_switch: task xfce4-panel:4569 [120] (S) ==> swapper:0 [140] (3) Xorg-4276 [001] 1494.663860125: sched_wakeup: task xfce4-panel:4569 [120] success=1 [000] (4) Xorg-4276 [001] 1504.098252756: sched_wakeup: task xfce4-panel:4569 [120] success=1 [000] (5) perf-5219 [000] 1504.100353302: sched_switch: task perf:5219 [120] (S) ==> xfce4-panel:4569 [120] The traces are processed in the order they arrive. Then in (2), xfce4-panel sleeps, it is first waken up in (3) and eventually scheduled in (5). The latency reported is then 1504 - 1495 = 9 secs, as reported by perf sched. But this is wrong, we are confident in the fact the traces are nicely serialized while we should actually more trust the timestamps. If we reorder by timestamps we get: (1) Xorg-4276 [001] 1494.663860125: sched_wakeup: task xfce4-panel:4569 [120] success=1 [000] (2) [init]-0 [000] 1494.663899990: sched_switch: task swapper:0 [140] (R) ==> xfce4-panel:4569 [120] (3) xfce4-panel-4569 [000] 1494.663928373: sched_switch: task xfce4-panel:4569 [120] (S) ==> swapper:0 [140] (4) Xorg-4276 [001] 1504.098252756: sched_wakeup: task xfce4-panel:4569 [120] success=1 [000] (5) perf-5219 [000] 1504.100353302: sched_switch: task perf:5219 [120] (S) ==> xfce4-panel:4569 [120] Now the trace make more sense, xfce4-panel is sleeping. Then it is woken up in (1), scheduled in (2) It goes to sleep in (3), woken up in (4) and scheduled in (5). Now, latency captured between (1) and (2) is of 39 us. And between (4) and (5) it is 2.1 ms. Such pattern of bad serializing is the origin of the high latencies reported by perf sched. Basically, we need to check whether wake up time is higher than schedule out time. If it's not the case, we need to tag the current work atom as invalid. Beside that, we may need to work later on a better ordering of the traces given by the kernel. After this patch: xfce4-session | 0.221 ms | 1 | avg: 0.538 ms | max: 0.538 ms | Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-14 09:01:12 +08:00
atom->sched_out_time = timestamp;
perf sched: Add support for sched:sched_stat_runtime events This allows more precise 'perf sched latency' output: --------------------------------------------------------------------------------------- Task | Runtime ms | Switches | Average delay ms | Maximum delay ms | --------------------------------------------------------------------------------------- ksoftirqd/0-4 | 0.010 ms | 2 | avg: 2.476 ms | max: 2.977 ms | perf-12328 | 15.844 ms | 66 | avg: 1.118 ms | max: 9.979 ms | bdi-default-235 | 0.009 ms | 1 | avg: 0.998 ms | max: 0.998 ms | events/1-8 | 0.020 ms | 2 | avg: 0.998 ms | max: 0.998 ms | events/0-7 | 0.018 ms | 2 | avg: 0.992 ms | max: 0.996 ms | sleep-12329 | 0.742 ms | 3 | avg: 0.906 ms | max: 2.289 ms | sshd-12122 | 0.163 ms | 2 | avg: 0.283 ms | max: 0.562 ms | loop-getpid-lon-12322 | 1023.636 ms | 69 | avg: 0.208 ms | max: 5.996 ms | loop-getpid-lon-12321 | 1038.638 ms | 5 | avg: 0.073 ms | max: 0.171 ms | migration/1-5 | 0.000 ms | 1 | avg: 0.006 ms | max: 0.006 ms | --------------------------------------------------------------------------------------- TOTAL: | 2079.078 ms | 153 | ------------------------------------------------- Also, streamline the code a bit more, add asserts for various state machine failures (they should be debugged if they occur) and fix a few odd ends. Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-15 02:04:48 +08:00
if (run_state == 'R') {
atom->state = THREAD_WAIT_CPU;
perf tools: Fix processing of randomly serialized sched traces Currently it's possible to meet such too high latency results with 'perf sched latency'. ----------------------------------------------------------------------------------- Task | Runtime ms | Switches | Average delay ms | Maximum delay ms | ----------------------------------------------------------------------------------- xfce4-panel | 0.222 ms | 2 | avg: 4718.345 ms | max: 9436.493 ms | scsi_eh_3 | 3.962 ms | 36 | avg: 55.957 ms | max: 1977.829 ms | The origin is on traces that are sometimes badly serialized across cpus. For example the raw traces that raised such results for xfce4-panel: (1) [init]-0 [000] 1494.663899990: sched_switch: task swapper:0 [140] (R) ==> xfce4-panel:4569 [120] (2) xfce4-panel-4569 [000] 1494.663928373: sched_switch: task xfce4-panel:4569 [120] (S) ==> swapper:0 [140] (3) Xorg-4276 [001] 1494.663860125: sched_wakeup: task xfce4-panel:4569 [120] success=1 [000] (4) Xorg-4276 [001] 1504.098252756: sched_wakeup: task xfce4-panel:4569 [120] success=1 [000] (5) perf-5219 [000] 1504.100353302: sched_switch: task perf:5219 [120] (S) ==> xfce4-panel:4569 [120] The traces are processed in the order they arrive. Then in (2), xfce4-panel sleeps, it is first waken up in (3) and eventually scheduled in (5). The latency reported is then 1504 - 1495 = 9 secs, as reported by perf sched. But this is wrong, we are confident in the fact the traces are nicely serialized while we should actually more trust the timestamps. If we reorder by timestamps we get: (1) Xorg-4276 [001] 1494.663860125: sched_wakeup: task xfce4-panel:4569 [120] success=1 [000] (2) [init]-0 [000] 1494.663899990: sched_switch: task swapper:0 [140] (R) ==> xfce4-panel:4569 [120] (3) xfce4-panel-4569 [000] 1494.663928373: sched_switch: task xfce4-panel:4569 [120] (S) ==> swapper:0 [140] (4) Xorg-4276 [001] 1504.098252756: sched_wakeup: task xfce4-panel:4569 [120] success=1 [000] (5) perf-5219 [000] 1504.100353302: sched_switch: task perf:5219 [120] (S) ==> xfce4-panel:4569 [120] Now the trace make more sense, xfce4-panel is sleeping. Then it is woken up in (1), scheduled in (2) It goes to sleep in (3), woken up in (4) and scheduled in (5). Now, latency captured between (1) and (2) is of 39 us. And between (4) and (5) it is 2.1 ms. Such pattern of bad serializing is the origin of the high latencies reported by perf sched. Basically, we need to check whether wake up time is higher than schedule out time. If it's not the case, we need to tag the current work atom as invalid. Beside that, we may need to work later on a better ordering of the traces given by the kernel. After this patch: xfce4-session | 0.221 ms | 1 | avg: 0.538 ms | max: 0.538 ms | Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-14 09:01:12 +08:00
atom->wake_up_time = atom->sched_out_time;
}
perf sched: Add support for sched:sched_stat_runtime events This allows more precise 'perf sched latency' output: --------------------------------------------------------------------------------------- Task | Runtime ms | Switches | Average delay ms | Maximum delay ms | --------------------------------------------------------------------------------------- ksoftirqd/0-4 | 0.010 ms | 2 | avg: 2.476 ms | max: 2.977 ms | perf-12328 | 15.844 ms | 66 | avg: 1.118 ms | max: 9.979 ms | bdi-default-235 | 0.009 ms | 1 | avg: 0.998 ms | max: 0.998 ms | events/1-8 | 0.020 ms | 2 | avg: 0.998 ms | max: 0.998 ms | events/0-7 | 0.018 ms | 2 | avg: 0.992 ms | max: 0.996 ms | sleep-12329 | 0.742 ms | 3 | avg: 0.906 ms | max: 2.289 ms | sshd-12122 | 0.163 ms | 2 | avg: 0.283 ms | max: 0.562 ms | loop-getpid-lon-12322 | 1023.636 ms | 69 | avg: 0.208 ms | max: 5.996 ms | loop-getpid-lon-12321 | 1038.638 ms | 5 | avg: 0.073 ms | max: 0.171 ms | migration/1-5 | 0.000 ms | 1 | avg: 0.006 ms | max: 0.006 ms | --------------------------------------------------------------------------------------- TOTAL: | 2079.078 ms | 153 | ------------------------------------------------- Also, streamline the code a bit more, add asserts for various state machine failures (they should be debugged if they occur) and fix a few odd ends. Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-15 02:04:48 +08:00
list_add_tail(&atom->list, &atoms->work_list);
return 0;
}
static void
perf tools: Use __maybe_used for unused variables perf defines both __used and __unused variables to use for marking unused variables. The variable __used is defined to __attribute__((__unused__)), which contradicts the kernel definition to __attribute__((__used__)) for new gcc versions. On Android, __used is also defined in system headers and this leads to warnings like: warning: '__used__' attribute ignored __unused is not defined in the kernel and is not a standard definition. If __unused is included everywhere instead of __used, this leads to conflicts with glibc headers, since glibc has a variables with this name in its headers. The best approach is to use __maybe_unused, the definition used in the kernel for __attribute__((unused)). In this way there is only one definition in perf sources (instead of 2 definitions that point to the same thing: __used and __unused) and it works on both Linux and Android. This patch simply replaces all instances of __used and __unused with __maybe_unused. Signed-off-by: Irina Tirdea <irina.tirdea@intel.com> Acked-by: Pekka Enberg <penberg@kernel.org> Cc: David Ahern <dsahern@gmail.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Namhyung Kim <namhyung.kim@lge.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Steven Rostedt <rostedt@goodmis.org> Link: http://lkml.kernel.org/r/1347315303-29906-7-git-send-email-irina.tirdea@intel.com [ committer note: fixed up conflict with a116e05 in builtin-sched.c ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-09-11 06:15:03 +08:00
add_runtime_event(struct work_atoms *atoms, u64 delta,
u64 timestamp __maybe_unused)
perf sched: Add support for sched:sched_stat_runtime events This allows more precise 'perf sched latency' output: --------------------------------------------------------------------------------------- Task | Runtime ms | Switches | Average delay ms | Maximum delay ms | --------------------------------------------------------------------------------------- ksoftirqd/0-4 | 0.010 ms | 2 | avg: 2.476 ms | max: 2.977 ms | perf-12328 | 15.844 ms | 66 | avg: 1.118 ms | max: 9.979 ms | bdi-default-235 | 0.009 ms | 1 | avg: 0.998 ms | max: 0.998 ms | events/1-8 | 0.020 ms | 2 | avg: 0.998 ms | max: 0.998 ms | events/0-7 | 0.018 ms | 2 | avg: 0.992 ms | max: 0.996 ms | sleep-12329 | 0.742 ms | 3 | avg: 0.906 ms | max: 2.289 ms | sshd-12122 | 0.163 ms | 2 | avg: 0.283 ms | max: 0.562 ms | loop-getpid-lon-12322 | 1023.636 ms | 69 | avg: 0.208 ms | max: 5.996 ms | loop-getpid-lon-12321 | 1038.638 ms | 5 | avg: 0.073 ms | max: 0.171 ms | migration/1-5 | 0.000 ms | 1 | avg: 0.006 ms | max: 0.006 ms | --------------------------------------------------------------------------------------- TOTAL: | 2079.078 ms | 153 | ------------------------------------------------- Also, streamline the code a bit more, add asserts for various state machine failures (they should be debugged if they occur) and fix a few odd ends. Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-15 02:04:48 +08:00
{
struct work_atom *atom;
BUG_ON(list_empty(&atoms->work_list));
atom = list_entry(atoms->work_list.prev, struct work_atom, list);
atom->runtime += delta;
atoms->total_runtime += delta;
}
static void
add_sched_in_event(struct work_atoms *atoms, u64 timestamp)
{
struct work_atom *atom;
u64 delta;
perf sched: Add support for sched:sched_stat_runtime events This allows more precise 'perf sched latency' output: --------------------------------------------------------------------------------------- Task | Runtime ms | Switches | Average delay ms | Maximum delay ms | --------------------------------------------------------------------------------------- ksoftirqd/0-4 | 0.010 ms | 2 | avg: 2.476 ms | max: 2.977 ms | perf-12328 | 15.844 ms | 66 | avg: 1.118 ms | max: 9.979 ms | bdi-default-235 | 0.009 ms | 1 | avg: 0.998 ms | max: 0.998 ms | events/1-8 | 0.020 ms | 2 | avg: 0.998 ms | max: 0.998 ms | events/0-7 | 0.018 ms | 2 | avg: 0.992 ms | max: 0.996 ms | sleep-12329 | 0.742 ms | 3 | avg: 0.906 ms | max: 2.289 ms | sshd-12122 | 0.163 ms | 2 | avg: 0.283 ms | max: 0.562 ms | loop-getpid-lon-12322 | 1023.636 ms | 69 | avg: 0.208 ms | max: 5.996 ms | loop-getpid-lon-12321 | 1038.638 ms | 5 | avg: 0.073 ms | max: 0.171 ms | migration/1-5 | 0.000 ms | 1 | avg: 0.006 ms | max: 0.006 ms | --------------------------------------------------------------------------------------- TOTAL: | 2079.078 ms | 153 | ------------------------------------------------- Also, streamline the code a bit more, add asserts for various state machine failures (they should be debugged if they occur) and fix a few odd ends. Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-15 02:04:48 +08:00
if (list_empty(&atoms->work_list))
return;
perf sched: Add support for sched:sched_stat_runtime events This allows more precise 'perf sched latency' output: --------------------------------------------------------------------------------------- Task | Runtime ms | Switches | Average delay ms | Maximum delay ms | --------------------------------------------------------------------------------------- ksoftirqd/0-4 | 0.010 ms | 2 | avg: 2.476 ms | max: 2.977 ms | perf-12328 | 15.844 ms | 66 | avg: 1.118 ms | max: 9.979 ms | bdi-default-235 | 0.009 ms | 1 | avg: 0.998 ms | max: 0.998 ms | events/1-8 | 0.020 ms | 2 | avg: 0.998 ms | max: 0.998 ms | events/0-7 | 0.018 ms | 2 | avg: 0.992 ms | max: 0.996 ms | sleep-12329 | 0.742 ms | 3 | avg: 0.906 ms | max: 2.289 ms | sshd-12122 | 0.163 ms | 2 | avg: 0.283 ms | max: 0.562 ms | loop-getpid-lon-12322 | 1023.636 ms | 69 | avg: 0.208 ms | max: 5.996 ms | loop-getpid-lon-12321 | 1038.638 ms | 5 | avg: 0.073 ms | max: 0.171 ms | migration/1-5 | 0.000 ms | 1 | avg: 0.006 ms | max: 0.006 ms | --------------------------------------------------------------------------------------- TOTAL: | 2079.078 ms | 153 | ------------------------------------------------- Also, streamline the code a bit more, add asserts for various state machine failures (they should be debugged if they occur) and fix a few odd ends. Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-15 02:04:48 +08:00
atom = list_entry(atoms->work_list.prev, struct work_atom, list);
if (atom->state != THREAD_WAIT_CPU)
return;
if (timestamp < atom->wake_up_time) {
atom->state = THREAD_IGNORE;
return;
}
atom->state = THREAD_SCHED_IN;
atom->sched_in_time = timestamp;
delta = atom->sched_in_time - atom->wake_up_time;
atoms->total_lat += delta;
if (delta > atoms->max_lat) {
atoms->max_lat = delta;
atoms->max_lat_at = timestamp;
}
atoms->nb_atoms++;
}
perf sched: Don't read all tracepoint variables in advance Do it just at the actual consumer of these fields, that way we avoid needless lookups: [root@sandy ~]# perf sched record sleep 30s [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 8.585 MB perf.data (~375063 samples) ] Before: [root@sandy ~]# perf stat -r 10 perf sched lat > /dev/null Performance counter stats for 'perf sched lat' (10 runs): 103.592215 task-clock # 0.993 CPUs utilized ( +- 0.33% ) 12 context-switches # 0.114 K/sec ( +- 3.29% ) 0 cpu-migrations # 0.000 K/sec 7,605 page-faults # 0.073 M/sec ( +- 0.00% ) 345,796,112 cycles # 3.338 GHz ( +- 0.07% ) [82.90%] 106,876,796 stalled-cycles-frontend # 30.91% frontend cycles idle ( +- 0.38% ) [83.23%] 62,060,877 stalled-cycles-backend # 17.95% backend cycles idle ( +- 0.80% ) [67.14%] 628,246,586 instructions # 1.82 insns per cycle # 0.17 stalled cycles per insn ( +- 0.04% ) [83.64%] 134,962,057 branches # 1302.820 M/sec ( +- 0.10% ) [83.64%] 1,233,037 branch-misses # 0.91% of all branches ( +- 0.29% ) [83.41%] 0.104333272 seconds time elapsed ( +- 0.33% ) [root@sandy ~]# perf stat -r 10 perf sched lat > /dev/null Performance counter stats for 'perf sched lat' (10 runs): 98.848272 task-clock # 0.993 CPUs utilized ( +- 0.48% ) 11 context-switches # 0.112 K/sec ( +- 2.83% ) 0 cpu-migrations # 0.003 K/sec ( +- 50.92% ) 7,604 page-faults # 0.077 M/sec ( +- 0.00% ) 332,216,085 cycles # 3.361 GHz ( +- 0.14% ) [82.87%] 100,623,710 stalled-cycles-frontend # 30.29% frontend cycles idle ( +- 0.53% ) [82.95%] 58,788,692 stalled-cycles-backend # 17.70% backend cycles idle ( +- 0.59% ) [67.15%] 609,402,433 instructions # 1.83 insns per cycle # 0.17 stalled cycles per insn ( +- 0.04% ) [83.76%] 131,277,138 branches # 1328.067 M/sec ( +- 0.06% ) [83.77%] 1,117,871 branch-misses # 0.85% of all branches ( +- 0.32% ) [83.51%] 0.099580430 seconds time elapsed ( +- 0.48% ) [root@sandy ~]# Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Namhyung Kim <namhyung@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-kracdpw8wqlr0xjh75uk8g11@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-09-12 06:29:17 +08:00
static int latency_switch_event(struct perf_sched *sched,
struct evsel *evsel,
perf sched: Don't read all tracepoint variables in advance Do it just at the actual consumer of these fields, that way we avoid needless lookups: [root@sandy ~]# perf sched record sleep 30s [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 8.585 MB perf.data (~375063 samples) ] Before: [root@sandy ~]# perf stat -r 10 perf sched lat > /dev/null Performance counter stats for 'perf sched lat' (10 runs): 103.592215 task-clock # 0.993 CPUs utilized ( +- 0.33% ) 12 context-switches # 0.114 K/sec ( +- 3.29% ) 0 cpu-migrations # 0.000 K/sec 7,605 page-faults # 0.073 M/sec ( +- 0.00% ) 345,796,112 cycles # 3.338 GHz ( +- 0.07% ) [82.90%] 106,876,796 stalled-cycles-frontend # 30.91% frontend cycles idle ( +- 0.38% ) [83.23%] 62,060,877 stalled-cycles-backend # 17.95% backend cycles idle ( +- 0.80% ) [67.14%] 628,246,586 instructions # 1.82 insns per cycle # 0.17 stalled cycles per insn ( +- 0.04% ) [83.64%] 134,962,057 branches # 1302.820 M/sec ( +- 0.10% ) [83.64%] 1,233,037 branch-misses # 0.91% of all branches ( +- 0.29% ) [83.41%] 0.104333272 seconds time elapsed ( +- 0.33% ) [root@sandy ~]# perf stat -r 10 perf sched lat > /dev/null Performance counter stats for 'perf sched lat' (10 runs): 98.848272 task-clock # 0.993 CPUs utilized ( +- 0.48% ) 11 context-switches # 0.112 K/sec ( +- 2.83% ) 0 cpu-migrations # 0.003 K/sec ( +- 50.92% ) 7,604 page-faults # 0.077 M/sec ( +- 0.00% ) 332,216,085 cycles # 3.361 GHz ( +- 0.14% ) [82.87%] 100,623,710 stalled-cycles-frontend # 30.29% frontend cycles idle ( +- 0.53% ) [82.95%] 58,788,692 stalled-cycles-backend # 17.70% backend cycles idle ( +- 0.59% ) [67.15%] 609,402,433 instructions # 1.83 insns per cycle # 0.17 stalled cycles per insn ( +- 0.04% ) [83.76%] 131,277,138 branches # 1328.067 M/sec ( +- 0.06% ) [83.77%] 1,117,871 branch-misses # 0.85% of all branches ( +- 0.32% ) [83.51%] 0.099580430 seconds time elapsed ( +- 0.48% ) [root@sandy ~]# Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Namhyung Kim <namhyung@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-kracdpw8wqlr0xjh75uk8g11@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-09-12 06:29:17 +08:00
struct perf_sample *sample,
struct machine *machine)
{
perf sched: Don't read all tracepoint variables in advance Do it just at the actual consumer of these fields, that way we avoid needless lookups: [root@sandy ~]# perf sched record sleep 30s [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 8.585 MB perf.data (~375063 samples) ] Before: [root@sandy ~]# perf stat -r 10 perf sched lat > /dev/null Performance counter stats for 'perf sched lat' (10 runs): 103.592215 task-clock # 0.993 CPUs utilized ( +- 0.33% ) 12 context-switches # 0.114 K/sec ( +- 3.29% ) 0 cpu-migrations # 0.000 K/sec 7,605 page-faults # 0.073 M/sec ( +- 0.00% ) 345,796,112 cycles # 3.338 GHz ( +- 0.07% ) [82.90%] 106,876,796 stalled-cycles-frontend # 30.91% frontend cycles idle ( +- 0.38% ) [83.23%] 62,060,877 stalled-cycles-backend # 17.95% backend cycles idle ( +- 0.80% ) [67.14%] 628,246,586 instructions # 1.82 insns per cycle # 0.17 stalled cycles per insn ( +- 0.04% ) [83.64%] 134,962,057 branches # 1302.820 M/sec ( +- 0.10% ) [83.64%] 1,233,037 branch-misses # 0.91% of all branches ( +- 0.29% ) [83.41%] 0.104333272 seconds time elapsed ( +- 0.33% ) [root@sandy ~]# perf stat -r 10 perf sched lat > /dev/null Performance counter stats for 'perf sched lat' (10 runs): 98.848272 task-clock # 0.993 CPUs utilized ( +- 0.48% ) 11 context-switches # 0.112 K/sec ( +- 2.83% ) 0 cpu-migrations # 0.003 K/sec ( +- 50.92% ) 7,604 page-faults # 0.077 M/sec ( +- 0.00% ) 332,216,085 cycles # 3.361 GHz ( +- 0.14% ) [82.87%] 100,623,710 stalled-cycles-frontend # 30.29% frontend cycles idle ( +- 0.53% ) [82.95%] 58,788,692 stalled-cycles-backend # 17.70% backend cycles idle ( +- 0.59% ) [67.15%] 609,402,433 instructions # 1.83 insns per cycle # 0.17 stalled cycles per insn ( +- 0.04% ) [83.76%] 131,277,138 branches # 1328.067 M/sec ( +- 0.06% ) [83.77%] 1,117,871 branch-misses # 0.85% of all branches ( +- 0.32% ) [83.51%] 0.099580430 seconds time elapsed ( +- 0.48% ) [root@sandy ~]# Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Namhyung Kim <namhyung@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-kracdpw8wqlr0xjh75uk8g11@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-09-12 06:29:17 +08:00
const u32 prev_pid = perf_evsel__intval(evsel, sample, "prev_pid"),
next_pid = perf_evsel__intval(evsel, sample, "next_pid");
const u64 prev_state = perf_evsel__intval(evsel, sample, "prev_state");
perf sched: Add support for sched:sched_stat_runtime events This allows more precise 'perf sched latency' output: --------------------------------------------------------------------------------------- Task | Runtime ms | Switches | Average delay ms | Maximum delay ms | --------------------------------------------------------------------------------------- ksoftirqd/0-4 | 0.010 ms | 2 | avg: 2.476 ms | max: 2.977 ms | perf-12328 | 15.844 ms | 66 | avg: 1.118 ms | max: 9.979 ms | bdi-default-235 | 0.009 ms | 1 | avg: 0.998 ms | max: 0.998 ms | events/1-8 | 0.020 ms | 2 | avg: 0.998 ms | max: 0.998 ms | events/0-7 | 0.018 ms | 2 | avg: 0.992 ms | max: 0.996 ms | sleep-12329 | 0.742 ms | 3 | avg: 0.906 ms | max: 2.289 ms | sshd-12122 | 0.163 ms | 2 | avg: 0.283 ms | max: 0.562 ms | loop-getpid-lon-12322 | 1023.636 ms | 69 | avg: 0.208 ms | max: 5.996 ms | loop-getpid-lon-12321 | 1038.638 ms | 5 | avg: 0.073 ms | max: 0.171 ms | migration/1-5 | 0.000 ms | 1 | avg: 0.006 ms | max: 0.006 ms | --------------------------------------------------------------------------------------- TOTAL: | 2079.078 ms | 153 | ------------------------------------------------- Also, streamline the code a bit more, add asserts for various state machine failures (they should be debugged if they occur) and fix a few odd ends. Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-15 02:04:48 +08:00
struct work_atoms *out_events, *in_events;
struct thread *sched_out, *sched_in;
u64 timestamp0, timestamp = sample->time;
perf machine: Protect the machine->threads with a rwlock In addition to using refcounts for the struct thread lifetime management, we need to protect access to machine->threads from concurrent access. That happens in 'perf top', where a thread processes events, inserting and deleting entries from that rb_tree while another thread decays hist_entries, that end up dropping references and ultimately deleting threads from the rb_tree and releasing its resources when no further hist_entry (or other data structures, like in 'perf sched') references it. So the rule is the same for refcounts + protected trees in the kernel, get the tree lock, find object, bump the refcount, drop the tree lock, return, use object, drop the refcount if no more use of it is needed, keep it if storing it in some other data structure, drop when releasing that data structure. I.e. pair "t = machine__find(new)_thread()" with a "thread__put(t)", and "perf_event__preprocess_sample(&al)" with "addr_location__put(&al)". The addr_location__put() one is because as we return references to several data structures, we may end up adding more reference counting for the other data structures and then we'll drop it at addr_location__put() time. Acked-by: David Ahern <dsahern@gmail.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Borislav Petkov <bp@suse.de> Cc: Don Zickus <dzickus@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-bs9rt4n0jw3hi9f3zxyy3xln@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-04-07 07:43:22 +08:00
int cpu = sample->cpu, err = -1;
s64 delta;
perf sched: Add support for sched:sched_stat_runtime events This allows more precise 'perf sched latency' output: --------------------------------------------------------------------------------------- Task | Runtime ms | Switches | Average delay ms | Maximum delay ms | --------------------------------------------------------------------------------------- ksoftirqd/0-4 | 0.010 ms | 2 | avg: 2.476 ms | max: 2.977 ms | perf-12328 | 15.844 ms | 66 | avg: 1.118 ms | max: 9.979 ms | bdi-default-235 | 0.009 ms | 1 | avg: 0.998 ms | max: 0.998 ms | events/1-8 | 0.020 ms | 2 | avg: 0.998 ms | max: 0.998 ms | events/0-7 | 0.018 ms | 2 | avg: 0.992 ms | max: 0.996 ms | sleep-12329 | 0.742 ms | 3 | avg: 0.906 ms | max: 2.289 ms | sshd-12122 | 0.163 ms | 2 | avg: 0.283 ms | max: 0.562 ms | loop-getpid-lon-12322 | 1023.636 ms | 69 | avg: 0.208 ms | max: 5.996 ms | loop-getpid-lon-12321 | 1038.638 ms | 5 | avg: 0.073 ms | max: 0.171 ms | migration/1-5 | 0.000 ms | 1 | avg: 0.006 ms | max: 0.006 ms | --------------------------------------------------------------------------------------- TOTAL: | 2079.078 ms | 153 | ------------------------------------------------- Also, streamline the code a bit more, add asserts for various state machine failures (they should be debugged if they occur) and fix a few odd ends. Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-15 02:04:48 +08:00
BUG_ON(cpu >= MAX_CPUS || cpu < 0);
timestamp0 = sched->cpu_last_switched[cpu];
sched->cpu_last_switched[cpu] = timestamp;
if (timestamp0)
delta = timestamp - timestamp0;
else
delta = 0;
if (delta < 0) {
pr_err("hm, delta: %" PRIu64 " < 0 ?\n", delta);
return -1;
}
sched_out = machine__findnew_thread(machine, -1, prev_pid);
sched_in = machine__findnew_thread(machine, -1, next_pid);
perf machine: Protect the machine->threads with a rwlock In addition to using refcounts for the struct thread lifetime management, we need to protect access to machine->threads from concurrent access. That happens in 'perf top', where a thread processes events, inserting and deleting entries from that rb_tree while another thread decays hist_entries, that end up dropping references and ultimately deleting threads from the rb_tree and releasing its resources when no further hist_entry (or other data structures, like in 'perf sched') references it. So the rule is the same for refcounts + protected trees in the kernel, get the tree lock, find object, bump the refcount, drop the tree lock, return, use object, drop the refcount if no more use of it is needed, keep it if storing it in some other data structure, drop when releasing that data structure. I.e. pair "t = machine__find(new)_thread()" with a "thread__put(t)", and "perf_event__preprocess_sample(&al)" with "addr_location__put(&al)". The addr_location__put() one is because as we return references to several data structures, we may end up adding more reference counting for the other data structures and then we'll drop it at addr_location__put() time. Acked-by: David Ahern <dsahern@gmail.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Borislav Petkov <bp@suse.de> Cc: Don Zickus <dzickus@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-bs9rt4n0jw3hi9f3zxyy3xln@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-04-07 07:43:22 +08:00
if (sched_out == NULL || sched_in == NULL)
goto out_put;
out_events = thread_atoms_search(&sched->atom_root, sched_out, &sched->cmp_pid);
perf sched: Add support for sched:sched_stat_runtime events This allows more precise 'perf sched latency' output: --------------------------------------------------------------------------------------- Task | Runtime ms | Switches | Average delay ms | Maximum delay ms | --------------------------------------------------------------------------------------- ksoftirqd/0-4 | 0.010 ms | 2 | avg: 2.476 ms | max: 2.977 ms | perf-12328 | 15.844 ms | 66 | avg: 1.118 ms | max: 9.979 ms | bdi-default-235 | 0.009 ms | 1 | avg: 0.998 ms | max: 0.998 ms | events/1-8 | 0.020 ms | 2 | avg: 0.998 ms | max: 0.998 ms | events/0-7 | 0.018 ms | 2 | avg: 0.992 ms | max: 0.996 ms | sleep-12329 | 0.742 ms | 3 | avg: 0.906 ms | max: 2.289 ms | sshd-12122 | 0.163 ms | 2 | avg: 0.283 ms | max: 0.562 ms | loop-getpid-lon-12322 | 1023.636 ms | 69 | avg: 0.208 ms | max: 5.996 ms | loop-getpid-lon-12321 | 1038.638 ms | 5 | avg: 0.073 ms | max: 0.171 ms | migration/1-5 | 0.000 ms | 1 | avg: 0.006 ms | max: 0.006 ms | --------------------------------------------------------------------------------------- TOTAL: | 2079.078 ms | 153 | ------------------------------------------------- Also, streamline the code a bit more, add asserts for various state machine failures (they should be debugged if they occur) and fix a few odd ends. Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-15 02:04:48 +08:00
if (!out_events) {
if (thread_atoms_insert(sched, sched_out))
perf machine: Protect the machine->threads with a rwlock In addition to using refcounts for the struct thread lifetime management, we need to protect access to machine->threads from concurrent access. That happens in 'perf top', where a thread processes events, inserting and deleting entries from that rb_tree while another thread decays hist_entries, that end up dropping references and ultimately deleting threads from the rb_tree and releasing its resources when no further hist_entry (or other data structures, like in 'perf sched') references it. So the rule is the same for refcounts + protected trees in the kernel, get the tree lock, find object, bump the refcount, drop the tree lock, return, use object, drop the refcount if no more use of it is needed, keep it if storing it in some other data structure, drop when releasing that data structure. I.e. pair "t = machine__find(new)_thread()" with a "thread__put(t)", and "perf_event__preprocess_sample(&al)" with "addr_location__put(&al)". The addr_location__put() one is because as we return references to several data structures, we may end up adding more reference counting for the other data structures and then we'll drop it at addr_location__put() time. Acked-by: David Ahern <dsahern@gmail.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Borislav Petkov <bp@suse.de> Cc: Don Zickus <dzickus@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-bs9rt4n0jw3hi9f3zxyy3xln@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-04-07 07:43:22 +08:00
goto out_put;
out_events = thread_atoms_search(&sched->atom_root, sched_out, &sched->cmp_pid);
if (!out_events) {
pr_err("out-event: Internal tree error");
perf machine: Protect the machine->threads with a rwlock In addition to using refcounts for the struct thread lifetime management, we need to protect access to machine->threads from concurrent access. That happens in 'perf top', where a thread processes events, inserting and deleting entries from that rb_tree while another thread decays hist_entries, that end up dropping references and ultimately deleting threads from the rb_tree and releasing its resources when no further hist_entry (or other data structures, like in 'perf sched') references it. So the rule is the same for refcounts + protected trees in the kernel, get the tree lock, find object, bump the refcount, drop the tree lock, return, use object, drop the refcount if no more use of it is needed, keep it if storing it in some other data structure, drop when releasing that data structure. I.e. pair "t = machine__find(new)_thread()" with a "thread__put(t)", and "perf_event__preprocess_sample(&al)" with "addr_location__put(&al)". The addr_location__put() one is because as we return references to several data structures, we may end up adding more reference counting for the other data structures and then we'll drop it at addr_location__put() time. Acked-by: David Ahern <dsahern@gmail.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Borislav Petkov <bp@suse.de> Cc: Don Zickus <dzickus@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-bs9rt4n0jw3hi9f3zxyy3xln@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-04-07 07:43:22 +08:00
goto out_put;
}
perf sched: Add support for sched:sched_stat_runtime events This allows more precise 'perf sched latency' output: --------------------------------------------------------------------------------------- Task | Runtime ms | Switches | Average delay ms | Maximum delay ms | --------------------------------------------------------------------------------------- ksoftirqd/0-4 | 0.010 ms | 2 | avg: 2.476 ms | max: 2.977 ms | perf-12328 | 15.844 ms | 66 | avg: 1.118 ms | max: 9.979 ms | bdi-default-235 | 0.009 ms | 1 | avg: 0.998 ms | max: 0.998 ms | events/1-8 | 0.020 ms | 2 | avg: 0.998 ms | max: 0.998 ms | events/0-7 | 0.018 ms | 2 | avg: 0.992 ms | max: 0.996 ms | sleep-12329 | 0.742 ms | 3 | avg: 0.906 ms | max: 2.289 ms | sshd-12122 | 0.163 ms | 2 | avg: 0.283 ms | max: 0.562 ms | loop-getpid-lon-12322 | 1023.636 ms | 69 | avg: 0.208 ms | max: 5.996 ms | loop-getpid-lon-12321 | 1038.638 ms | 5 | avg: 0.073 ms | max: 0.171 ms | migration/1-5 | 0.000 ms | 1 | avg: 0.006 ms | max: 0.006 ms | --------------------------------------------------------------------------------------- TOTAL: | 2079.078 ms | 153 | ------------------------------------------------- Also, streamline the code a bit more, add asserts for various state machine failures (they should be debugged if they occur) and fix a few odd ends. Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-15 02:04:48 +08:00
}
perf sched: Don't read all tracepoint variables in advance Do it just at the actual consumer of these fields, that way we avoid needless lookups: [root@sandy ~]# perf sched record sleep 30s [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 8.585 MB perf.data (~375063 samples) ] Before: [root@sandy ~]# perf stat -r 10 perf sched lat > /dev/null Performance counter stats for 'perf sched lat' (10 runs): 103.592215 task-clock # 0.993 CPUs utilized ( +- 0.33% ) 12 context-switches # 0.114 K/sec ( +- 3.29% ) 0 cpu-migrations # 0.000 K/sec 7,605 page-faults # 0.073 M/sec ( +- 0.00% ) 345,796,112 cycles # 3.338 GHz ( +- 0.07% ) [82.90%] 106,876,796 stalled-cycles-frontend # 30.91% frontend cycles idle ( +- 0.38% ) [83.23%] 62,060,877 stalled-cycles-backend # 17.95% backend cycles idle ( +- 0.80% ) [67.14%] 628,246,586 instructions # 1.82 insns per cycle # 0.17 stalled cycles per insn ( +- 0.04% ) [83.64%] 134,962,057 branches # 1302.820 M/sec ( +- 0.10% ) [83.64%] 1,233,037 branch-misses # 0.91% of all branches ( +- 0.29% ) [83.41%] 0.104333272 seconds time elapsed ( +- 0.33% ) [root@sandy ~]# perf stat -r 10 perf sched lat > /dev/null Performance counter stats for 'perf sched lat' (10 runs): 98.848272 task-clock # 0.993 CPUs utilized ( +- 0.48% ) 11 context-switches # 0.112 K/sec ( +- 2.83% ) 0 cpu-migrations # 0.003 K/sec ( +- 50.92% ) 7,604 page-faults # 0.077 M/sec ( +- 0.00% ) 332,216,085 cycles # 3.361 GHz ( +- 0.14% ) [82.87%] 100,623,710 stalled-cycles-frontend # 30.29% frontend cycles idle ( +- 0.53% ) [82.95%] 58,788,692 stalled-cycles-backend # 17.70% backend cycles idle ( +- 0.59% ) [67.15%] 609,402,433 instructions # 1.83 insns per cycle # 0.17 stalled cycles per insn ( +- 0.04% ) [83.76%] 131,277,138 branches # 1328.067 M/sec ( +- 0.06% ) [83.77%] 1,117,871 branch-misses # 0.85% of all branches ( +- 0.32% ) [83.51%] 0.099580430 seconds time elapsed ( +- 0.48% ) [root@sandy ~]# Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Namhyung Kim <namhyung@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-kracdpw8wqlr0xjh75uk8g11@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-09-12 06:29:17 +08:00
if (add_sched_out_event(out_events, sched_out_state(prev_state), timestamp))
return -1;
perf sched: Add support for sched:sched_stat_runtime events This allows more precise 'perf sched latency' output: --------------------------------------------------------------------------------------- Task | Runtime ms | Switches | Average delay ms | Maximum delay ms | --------------------------------------------------------------------------------------- ksoftirqd/0-4 | 0.010 ms | 2 | avg: 2.476 ms | max: 2.977 ms | perf-12328 | 15.844 ms | 66 | avg: 1.118 ms | max: 9.979 ms | bdi-default-235 | 0.009 ms | 1 | avg: 0.998 ms | max: 0.998 ms | events/1-8 | 0.020 ms | 2 | avg: 0.998 ms | max: 0.998 ms | events/0-7 | 0.018 ms | 2 | avg: 0.992 ms | max: 0.996 ms | sleep-12329 | 0.742 ms | 3 | avg: 0.906 ms | max: 2.289 ms | sshd-12122 | 0.163 ms | 2 | avg: 0.283 ms | max: 0.562 ms | loop-getpid-lon-12322 | 1023.636 ms | 69 | avg: 0.208 ms | max: 5.996 ms | loop-getpid-lon-12321 | 1038.638 ms | 5 | avg: 0.073 ms | max: 0.171 ms | migration/1-5 | 0.000 ms | 1 | avg: 0.006 ms | max: 0.006 ms | --------------------------------------------------------------------------------------- TOTAL: | 2079.078 ms | 153 | ------------------------------------------------- Also, streamline the code a bit more, add asserts for various state machine failures (they should be debugged if they occur) and fix a few odd ends. Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-15 02:04:48 +08:00
in_events = thread_atoms_search(&sched->atom_root, sched_in, &sched->cmp_pid);
perf sched: Add support for sched:sched_stat_runtime events This allows more precise 'perf sched latency' output: --------------------------------------------------------------------------------------- Task | Runtime ms | Switches | Average delay ms | Maximum delay ms | --------------------------------------------------------------------------------------- ksoftirqd/0-4 | 0.010 ms | 2 | avg: 2.476 ms | max: 2.977 ms | perf-12328 | 15.844 ms | 66 | avg: 1.118 ms | max: 9.979 ms | bdi-default-235 | 0.009 ms | 1 | avg: 0.998 ms | max: 0.998 ms | events/1-8 | 0.020 ms | 2 | avg: 0.998 ms | max: 0.998 ms | events/0-7 | 0.018 ms | 2 | avg: 0.992 ms | max: 0.996 ms | sleep-12329 | 0.742 ms | 3 | avg: 0.906 ms | max: 2.289 ms | sshd-12122 | 0.163 ms | 2 | avg: 0.283 ms | max: 0.562 ms | loop-getpid-lon-12322 | 1023.636 ms | 69 | avg: 0.208 ms | max: 5.996 ms | loop-getpid-lon-12321 | 1038.638 ms | 5 | avg: 0.073 ms | max: 0.171 ms | migration/1-5 | 0.000 ms | 1 | avg: 0.006 ms | max: 0.006 ms | --------------------------------------------------------------------------------------- TOTAL: | 2079.078 ms | 153 | ------------------------------------------------- Also, streamline the code a bit more, add asserts for various state machine failures (they should be debugged if they occur) and fix a few odd ends. Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-15 02:04:48 +08:00
if (!in_events) {
if (thread_atoms_insert(sched, sched_in))
perf machine: Protect the machine->threads with a rwlock In addition to using refcounts for the struct thread lifetime management, we need to protect access to machine->threads from concurrent access. That happens in 'perf top', where a thread processes events, inserting and deleting entries from that rb_tree while another thread decays hist_entries, that end up dropping references and ultimately deleting threads from the rb_tree and releasing its resources when no further hist_entry (or other data structures, like in 'perf sched') references it. So the rule is the same for refcounts + protected trees in the kernel, get the tree lock, find object, bump the refcount, drop the tree lock, return, use object, drop the refcount if no more use of it is needed, keep it if storing it in some other data structure, drop when releasing that data structure. I.e. pair "t = machine__find(new)_thread()" with a "thread__put(t)", and "perf_event__preprocess_sample(&al)" with "addr_location__put(&al)". The addr_location__put() one is because as we return references to several data structures, we may end up adding more reference counting for the other data structures and then we'll drop it at addr_location__put() time. Acked-by: David Ahern <dsahern@gmail.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Borislav Petkov <bp@suse.de> Cc: Don Zickus <dzickus@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-bs9rt4n0jw3hi9f3zxyy3xln@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-04-07 07:43:22 +08:00
goto out_put;
in_events = thread_atoms_search(&sched->atom_root, sched_in, &sched->cmp_pid);
if (!in_events) {
pr_err("in-event: Internal tree error");
perf machine: Protect the machine->threads with a rwlock In addition to using refcounts for the struct thread lifetime management, we need to protect access to machine->threads from concurrent access. That happens in 'perf top', where a thread processes events, inserting and deleting entries from that rb_tree while another thread decays hist_entries, that end up dropping references and ultimately deleting threads from the rb_tree and releasing its resources when no further hist_entry (or other data structures, like in 'perf sched') references it. So the rule is the same for refcounts + protected trees in the kernel, get the tree lock, find object, bump the refcount, drop the tree lock, return, use object, drop the refcount if no more use of it is needed, keep it if storing it in some other data structure, drop when releasing that data structure. I.e. pair "t = machine__find(new)_thread()" with a "thread__put(t)", and "perf_event__preprocess_sample(&al)" with "addr_location__put(&al)". The addr_location__put() one is because as we return references to several data structures, we may end up adding more reference counting for the other data structures and then we'll drop it at addr_location__put() time. Acked-by: David Ahern <dsahern@gmail.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Borislav Petkov <bp@suse.de> Cc: Don Zickus <dzickus@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-bs9rt4n0jw3hi9f3zxyy3xln@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-04-07 07:43:22 +08:00
goto out_put;
}
perf sched: Add support for sched:sched_stat_runtime events This allows more precise 'perf sched latency' output: --------------------------------------------------------------------------------------- Task | Runtime ms | Switches | Average delay ms | Maximum delay ms | --------------------------------------------------------------------------------------- ksoftirqd/0-4 | 0.010 ms | 2 | avg: 2.476 ms | max: 2.977 ms | perf-12328 | 15.844 ms | 66 | avg: 1.118 ms | max: 9.979 ms | bdi-default-235 | 0.009 ms | 1 | avg: 0.998 ms | max: 0.998 ms | events/1-8 | 0.020 ms | 2 | avg: 0.998 ms | max: 0.998 ms | events/0-7 | 0.018 ms | 2 | avg: 0.992 ms | max: 0.996 ms | sleep-12329 | 0.742 ms | 3 | avg: 0.906 ms | max: 2.289 ms | sshd-12122 | 0.163 ms | 2 | avg: 0.283 ms | max: 0.562 ms | loop-getpid-lon-12322 | 1023.636 ms | 69 | avg: 0.208 ms | max: 5.996 ms | loop-getpid-lon-12321 | 1038.638 ms | 5 | avg: 0.073 ms | max: 0.171 ms | migration/1-5 | 0.000 ms | 1 | avg: 0.006 ms | max: 0.006 ms | --------------------------------------------------------------------------------------- TOTAL: | 2079.078 ms | 153 | ------------------------------------------------- Also, streamline the code a bit more, add asserts for various state machine failures (they should be debugged if they occur) and fix a few odd ends. Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-15 02:04:48 +08:00
/*
* Take came in we have not heard about yet,
* add in an initial atom in runnable state:
*/
if (add_sched_out_event(in_events, 'R', timestamp))
perf machine: Protect the machine->threads with a rwlock In addition to using refcounts for the struct thread lifetime management, we need to protect access to machine->threads from concurrent access. That happens in 'perf top', where a thread processes events, inserting and deleting entries from that rb_tree while another thread decays hist_entries, that end up dropping references and ultimately deleting threads from the rb_tree and releasing its resources when no further hist_entry (or other data structures, like in 'perf sched') references it. So the rule is the same for refcounts + protected trees in the kernel, get the tree lock, find object, bump the refcount, drop the tree lock, return, use object, drop the refcount if no more use of it is needed, keep it if storing it in some other data structure, drop when releasing that data structure. I.e. pair "t = machine__find(new)_thread()" with a "thread__put(t)", and "perf_event__preprocess_sample(&al)" with "addr_location__put(&al)". The addr_location__put() one is because as we return references to several data structures, we may end up adding more reference counting for the other data structures and then we'll drop it at addr_location__put() time. Acked-by: David Ahern <dsahern@gmail.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Borislav Petkov <bp@suse.de> Cc: Don Zickus <dzickus@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-bs9rt4n0jw3hi9f3zxyy3xln@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-04-07 07:43:22 +08:00
goto out_put;
}
perf sched: Add support for sched:sched_stat_runtime events This allows more precise 'perf sched latency' output: --------------------------------------------------------------------------------------- Task | Runtime ms | Switches | Average delay ms | Maximum delay ms | --------------------------------------------------------------------------------------- ksoftirqd/0-4 | 0.010 ms | 2 | avg: 2.476 ms | max: 2.977 ms | perf-12328 | 15.844 ms | 66 | avg: 1.118 ms | max: 9.979 ms | bdi-default-235 | 0.009 ms | 1 | avg: 0.998 ms | max: 0.998 ms | events/1-8 | 0.020 ms | 2 | avg: 0.998 ms | max: 0.998 ms | events/0-7 | 0.018 ms | 2 | avg: 0.992 ms | max: 0.996 ms | sleep-12329 | 0.742 ms | 3 | avg: 0.906 ms | max: 2.289 ms | sshd-12122 | 0.163 ms | 2 | avg: 0.283 ms | max: 0.562 ms | loop-getpid-lon-12322 | 1023.636 ms | 69 | avg: 0.208 ms | max: 5.996 ms | loop-getpid-lon-12321 | 1038.638 ms | 5 | avg: 0.073 ms | max: 0.171 ms | migration/1-5 | 0.000 ms | 1 | avg: 0.006 ms | max: 0.006 ms | --------------------------------------------------------------------------------------- TOTAL: | 2079.078 ms | 153 | ------------------------------------------------- Also, streamline the code a bit more, add asserts for various state machine failures (they should be debugged if they occur) and fix a few odd ends. Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-15 02:04:48 +08:00
add_sched_in_event(in_events, timestamp);
perf machine: Protect the machine->threads with a rwlock In addition to using refcounts for the struct thread lifetime management, we need to protect access to machine->threads from concurrent access. That happens in 'perf top', where a thread processes events, inserting and deleting entries from that rb_tree while another thread decays hist_entries, that end up dropping references and ultimately deleting threads from the rb_tree and releasing its resources when no further hist_entry (or other data structures, like in 'perf sched') references it. So the rule is the same for refcounts + protected trees in the kernel, get the tree lock, find object, bump the refcount, drop the tree lock, return, use object, drop the refcount if no more use of it is needed, keep it if storing it in some other data structure, drop when releasing that data structure. I.e. pair "t = machine__find(new)_thread()" with a "thread__put(t)", and "perf_event__preprocess_sample(&al)" with "addr_location__put(&al)". The addr_location__put() one is because as we return references to several data structures, we may end up adding more reference counting for the other data structures and then we'll drop it at addr_location__put() time. Acked-by: David Ahern <dsahern@gmail.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Borislav Petkov <bp@suse.de> Cc: Don Zickus <dzickus@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-bs9rt4n0jw3hi9f3zxyy3xln@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-04-07 07:43:22 +08:00
err = 0;
out_put:
thread__put(sched_out);
thread__put(sched_in);
return err;
perf sched: Add support for sched:sched_stat_runtime events This allows more precise 'perf sched latency' output: --------------------------------------------------------------------------------------- Task | Runtime ms | Switches | Average delay ms | Maximum delay ms | --------------------------------------------------------------------------------------- ksoftirqd/0-4 | 0.010 ms | 2 | avg: 2.476 ms | max: 2.977 ms | perf-12328 | 15.844 ms | 66 | avg: 1.118 ms | max: 9.979 ms | bdi-default-235 | 0.009 ms | 1 | avg: 0.998 ms | max: 0.998 ms | events/1-8 | 0.020 ms | 2 | avg: 0.998 ms | max: 0.998 ms | events/0-7 | 0.018 ms | 2 | avg: 0.992 ms | max: 0.996 ms | sleep-12329 | 0.742 ms | 3 | avg: 0.906 ms | max: 2.289 ms | sshd-12122 | 0.163 ms | 2 | avg: 0.283 ms | max: 0.562 ms | loop-getpid-lon-12322 | 1023.636 ms | 69 | avg: 0.208 ms | max: 5.996 ms | loop-getpid-lon-12321 | 1038.638 ms | 5 | avg: 0.073 ms | max: 0.171 ms | migration/1-5 | 0.000 ms | 1 | avg: 0.006 ms | max: 0.006 ms | --------------------------------------------------------------------------------------- TOTAL: | 2079.078 ms | 153 | ------------------------------------------------- Also, streamline the code a bit more, add asserts for various state machine failures (they should be debugged if they occur) and fix a few odd ends. Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-15 02:04:48 +08:00
}
perf sched: Don't read all tracepoint variables in advance Do it just at the actual consumer of these fields, that way we avoid needless lookups: [root@sandy ~]# perf sched record sleep 30s [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 8.585 MB perf.data (~375063 samples) ] Before: [root@sandy ~]# perf stat -r 10 perf sched lat > /dev/null Performance counter stats for 'perf sched lat' (10 runs): 103.592215 task-clock # 0.993 CPUs utilized ( +- 0.33% ) 12 context-switches # 0.114 K/sec ( +- 3.29% ) 0 cpu-migrations # 0.000 K/sec 7,605 page-faults # 0.073 M/sec ( +- 0.00% ) 345,796,112 cycles # 3.338 GHz ( +- 0.07% ) [82.90%] 106,876,796 stalled-cycles-frontend # 30.91% frontend cycles idle ( +- 0.38% ) [83.23%] 62,060,877 stalled-cycles-backend # 17.95% backend cycles idle ( +- 0.80% ) [67.14%] 628,246,586 instructions # 1.82 insns per cycle # 0.17 stalled cycles per insn ( +- 0.04% ) [83.64%] 134,962,057 branches # 1302.820 M/sec ( +- 0.10% ) [83.64%] 1,233,037 branch-misses # 0.91% of all branches ( +- 0.29% ) [83.41%] 0.104333272 seconds time elapsed ( +- 0.33% ) [root@sandy ~]# perf stat -r 10 perf sched lat > /dev/null Performance counter stats for 'perf sched lat' (10 runs): 98.848272 task-clock # 0.993 CPUs utilized ( +- 0.48% ) 11 context-switches # 0.112 K/sec ( +- 2.83% ) 0 cpu-migrations # 0.003 K/sec ( +- 50.92% ) 7,604 page-faults # 0.077 M/sec ( +- 0.00% ) 332,216,085 cycles # 3.361 GHz ( +- 0.14% ) [82.87%] 100,623,710 stalled-cycles-frontend # 30.29% frontend cycles idle ( +- 0.53% ) [82.95%] 58,788,692 stalled-cycles-backend # 17.70% backend cycles idle ( +- 0.59% ) [67.15%] 609,402,433 instructions # 1.83 insns per cycle # 0.17 stalled cycles per insn ( +- 0.04% ) [83.76%] 131,277,138 branches # 1328.067 M/sec ( +- 0.06% ) [83.77%] 1,117,871 branch-misses # 0.85% of all branches ( +- 0.32% ) [83.51%] 0.099580430 seconds time elapsed ( +- 0.48% ) [root@sandy ~]# Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Namhyung Kim <namhyung@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-kracdpw8wqlr0xjh75uk8g11@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-09-12 06:29:17 +08:00
static int latency_runtime_event(struct perf_sched *sched,
struct evsel *evsel,
perf sched: Don't read all tracepoint variables in advance Do it just at the actual consumer of these fields, that way we avoid needless lookups: [root@sandy ~]# perf sched record sleep 30s [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 8.585 MB perf.data (~375063 samples) ] Before: [root@sandy ~]# perf stat -r 10 perf sched lat > /dev/null Performance counter stats for 'perf sched lat' (10 runs): 103.592215 task-clock # 0.993 CPUs utilized ( +- 0.33% ) 12 context-switches # 0.114 K/sec ( +- 3.29% ) 0 cpu-migrations # 0.000 K/sec 7,605 page-faults # 0.073 M/sec ( +- 0.00% ) 345,796,112 cycles # 3.338 GHz ( +- 0.07% ) [82.90%] 106,876,796 stalled-cycles-frontend # 30.91% frontend cycles idle ( +- 0.38% ) [83.23%] 62,060,877 stalled-cycles-backend # 17.95% backend cycles idle ( +- 0.80% ) [67.14%] 628,246,586 instructions # 1.82 insns per cycle # 0.17 stalled cycles per insn ( +- 0.04% ) [83.64%] 134,962,057 branches # 1302.820 M/sec ( +- 0.10% ) [83.64%] 1,233,037 branch-misses # 0.91% of all branches ( +- 0.29% ) [83.41%] 0.104333272 seconds time elapsed ( +- 0.33% ) [root@sandy ~]# perf stat -r 10 perf sched lat > /dev/null Performance counter stats for 'perf sched lat' (10 runs): 98.848272 task-clock # 0.993 CPUs utilized ( +- 0.48% ) 11 context-switches # 0.112 K/sec ( +- 2.83% ) 0 cpu-migrations # 0.003 K/sec ( +- 50.92% ) 7,604 page-faults # 0.077 M/sec ( +- 0.00% ) 332,216,085 cycles # 3.361 GHz ( +- 0.14% ) [82.87%] 100,623,710 stalled-cycles-frontend # 30.29% frontend cycles idle ( +- 0.53% ) [82.95%] 58,788,692 stalled-cycles-backend # 17.70% backend cycles idle ( +- 0.59% ) [67.15%] 609,402,433 instructions # 1.83 insns per cycle # 0.17 stalled cycles per insn ( +- 0.04% ) [83.76%] 131,277,138 branches # 1328.067 M/sec ( +- 0.06% ) [83.77%] 1,117,871 branch-misses # 0.85% of all branches ( +- 0.32% ) [83.51%] 0.099580430 seconds time elapsed ( +- 0.48% ) [root@sandy ~]# Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Namhyung Kim <namhyung@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-kracdpw8wqlr0xjh75uk8g11@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-09-12 06:29:17 +08:00
struct perf_sample *sample,
struct machine *machine)
perf sched: Add support for sched:sched_stat_runtime events This allows more precise 'perf sched latency' output: --------------------------------------------------------------------------------------- Task | Runtime ms | Switches | Average delay ms | Maximum delay ms | --------------------------------------------------------------------------------------- ksoftirqd/0-4 | 0.010 ms | 2 | avg: 2.476 ms | max: 2.977 ms | perf-12328 | 15.844 ms | 66 | avg: 1.118 ms | max: 9.979 ms | bdi-default-235 | 0.009 ms | 1 | avg: 0.998 ms | max: 0.998 ms | events/1-8 | 0.020 ms | 2 | avg: 0.998 ms | max: 0.998 ms | events/0-7 | 0.018 ms | 2 | avg: 0.992 ms | max: 0.996 ms | sleep-12329 | 0.742 ms | 3 | avg: 0.906 ms | max: 2.289 ms | sshd-12122 | 0.163 ms | 2 | avg: 0.283 ms | max: 0.562 ms | loop-getpid-lon-12322 | 1023.636 ms | 69 | avg: 0.208 ms | max: 5.996 ms | loop-getpid-lon-12321 | 1038.638 ms | 5 | avg: 0.073 ms | max: 0.171 ms | migration/1-5 | 0.000 ms | 1 | avg: 0.006 ms | max: 0.006 ms | --------------------------------------------------------------------------------------- TOTAL: | 2079.078 ms | 153 | ------------------------------------------------- Also, streamline the code a bit more, add asserts for various state machine failures (they should be debugged if they occur) and fix a few odd ends. Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-15 02:04:48 +08:00
{
perf sched: Don't read all tracepoint variables in advance Do it just at the actual consumer of these fields, that way we avoid needless lookups: [root@sandy ~]# perf sched record sleep 30s [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 8.585 MB perf.data (~375063 samples) ] Before: [root@sandy ~]# perf stat -r 10 perf sched lat > /dev/null Performance counter stats for 'perf sched lat' (10 runs): 103.592215 task-clock # 0.993 CPUs utilized ( +- 0.33% ) 12 context-switches # 0.114 K/sec ( +- 3.29% ) 0 cpu-migrations # 0.000 K/sec 7,605 page-faults # 0.073 M/sec ( +- 0.00% ) 345,796,112 cycles # 3.338 GHz ( +- 0.07% ) [82.90%] 106,876,796 stalled-cycles-frontend # 30.91% frontend cycles idle ( +- 0.38% ) [83.23%] 62,060,877 stalled-cycles-backend # 17.95% backend cycles idle ( +- 0.80% ) [67.14%] 628,246,586 instructions # 1.82 insns per cycle # 0.17 stalled cycles per insn ( +- 0.04% ) [83.64%] 134,962,057 branches # 1302.820 M/sec ( +- 0.10% ) [83.64%] 1,233,037 branch-misses # 0.91% of all branches ( +- 0.29% ) [83.41%] 0.104333272 seconds time elapsed ( +- 0.33% ) [root@sandy ~]# perf stat -r 10 perf sched lat > /dev/null Performance counter stats for 'perf sched lat' (10 runs): 98.848272 task-clock # 0.993 CPUs utilized ( +- 0.48% ) 11 context-switches # 0.112 K/sec ( +- 2.83% ) 0 cpu-migrations # 0.003 K/sec ( +- 50.92% ) 7,604 page-faults # 0.077 M/sec ( +- 0.00% ) 332,216,085 cycles # 3.361 GHz ( +- 0.14% ) [82.87%] 100,623,710 stalled-cycles-frontend # 30.29% frontend cycles idle ( +- 0.53% ) [82.95%] 58,788,692 stalled-cycles-backend # 17.70% backend cycles idle ( +- 0.59% ) [67.15%] 609,402,433 instructions # 1.83 insns per cycle # 0.17 stalled cycles per insn ( +- 0.04% ) [83.76%] 131,277,138 branches # 1328.067 M/sec ( +- 0.06% ) [83.77%] 1,117,871 branch-misses # 0.85% of all branches ( +- 0.32% ) [83.51%] 0.099580430 seconds time elapsed ( +- 0.48% ) [root@sandy ~]# Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Namhyung Kim <namhyung@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-kracdpw8wqlr0xjh75uk8g11@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-09-12 06:29:17 +08:00
const u32 pid = perf_evsel__intval(evsel, sample, "pid");
const u64 runtime = perf_evsel__intval(evsel, sample, "runtime");
struct thread *thread = machine__findnew_thread(machine, -1, pid);
struct work_atoms *atoms = thread_atoms_search(&sched->atom_root, thread, &sched->cmp_pid);
u64 timestamp = sample->time;
perf machine: Protect the machine->threads with a rwlock In addition to using refcounts for the struct thread lifetime management, we need to protect access to machine->threads from concurrent access. That happens in 'perf top', where a thread processes events, inserting and deleting entries from that rb_tree while another thread decays hist_entries, that end up dropping references and ultimately deleting threads from the rb_tree and releasing its resources when no further hist_entry (or other data structures, like in 'perf sched') references it. So the rule is the same for refcounts + protected trees in the kernel, get the tree lock, find object, bump the refcount, drop the tree lock, return, use object, drop the refcount if no more use of it is needed, keep it if storing it in some other data structure, drop when releasing that data structure. I.e. pair "t = machine__find(new)_thread()" with a "thread__put(t)", and "perf_event__preprocess_sample(&al)" with "addr_location__put(&al)". The addr_location__put() one is because as we return references to several data structures, we may end up adding more reference counting for the other data structures and then we'll drop it at addr_location__put() time. Acked-by: David Ahern <dsahern@gmail.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Borislav Petkov <bp@suse.de> Cc: Don Zickus <dzickus@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-bs9rt4n0jw3hi9f3zxyy3xln@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-04-07 07:43:22 +08:00
int cpu = sample->cpu, err = -1;
if (thread == NULL)
return -1;
perf sched: Add support for sched:sched_stat_runtime events This allows more precise 'perf sched latency' output: --------------------------------------------------------------------------------------- Task | Runtime ms | Switches | Average delay ms | Maximum delay ms | --------------------------------------------------------------------------------------- ksoftirqd/0-4 | 0.010 ms | 2 | avg: 2.476 ms | max: 2.977 ms | perf-12328 | 15.844 ms | 66 | avg: 1.118 ms | max: 9.979 ms | bdi-default-235 | 0.009 ms | 1 | avg: 0.998 ms | max: 0.998 ms | events/1-8 | 0.020 ms | 2 | avg: 0.998 ms | max: 0.998 ms | events/0-7 | 0.018 ms | 2 | avg: 0.992 ms | max: 0.996 ms | sleep-12329 | 0.742 ms | 3 | avg: 0.906 ms | max: 2.289 ms | sshd-12122 | 0.163 ms | 2 | avg: 0.283 ms | max: 0.562 ms | loop-getpid-lon-12322 | 1023.636 ms | 69 | avg: 0.208 ms | max: 5.996 ms | loop-getpid-lon-12321 | 1038.638 ms | 5 | avg: 0.073 ms | max: 0.171 ms | migration/1-5 | 0.000 ms | 1 | avg: 0.006 ms | max: 0.006 ms | --------------------------------------------------------------------------------------- TOTAL: | 2079.078 ms | 153 | ------------------------------------------------- Also, streamline the code a bit more, add asserts for various state machine failures (they should be debugged if they occur) and fix a few odd ends. Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-15 02:04:48 +08:00
BUG_ON(cpu >= MAX_CPUS || cpu < 0);
if (!atoms) {
if (thread_atoms_insert(sched, thread))
perf machine: Protect the machine->threads with a rwlock In addition to using refcounts for the struct thread lifetime management, we need to protect access to machine->threads from concurrent access. That happens in 'perf top', where a thread processes events, inserting and deleting entries from that rb_tree while another thread decays hist_entries, that end up dropping references and ultimately deleting threads from the rb_tree and releasing its resources when no further hist_entry (or other data structures, like in 'perf sched') references it. So the rule is the same for refcounts + protected trees in the kernel, get the tree lock, find object, bump the refcount, drop the tree lock, return, use object, drop the refcount if no more use of it is needed, keep it if storing it in some other data structure, drop when releasing that data structure. I.e. pair "t = machine__find(new)_thread()" with a "thread__put(t)", and "perf_event__preprocess_sample(&al)" with "addr_location__put(&al)". The addr_location__put() one is because as we return references to several data structures, we may end up adding more reference counting for the other data structures and then we'll drop it at addr_location__put() time. Acked-by: David Ahern <dsahern@gmail.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Borislav Petkov <bp@suse.de> Cc: Don Zickus <dzickus@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-bs9rt4n0jw3hi9f3zxyy3xln@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-04-07 07:43:22 +08:00
goto out_put;
atoms = thread_atoms_search(&sched->atom_root, thread, &sched->cmp_pid);
if (!atoms) {
pr_err("in-event: Internal tree error");
perf machine: Protect the machine->threads with a rwlock In addition to using refcounts for the struct thread lifetime management, we need to protect access to machine->threads from concurrent access. That happens in 'perf top', where a thread processes events, inserting and deleting entries from that rb_tree while another thread decays hist_entries, that end up dropping references and ultimately deleting threads from the rb_tree and releasing its resources when no further hist_entry (or other data structures, like in 'perf sched') references it. So the rule is the same for refcounts + protected trees in the kernel, get the tree lock, find object, bump the refcount, drop the tree lock, return, use object, drop the refcount if no more use of it is needed, keep it if storing it in some other data structure, drop when releasing that data structure. I.e. pair "t = machine__find(new)_thread()" with a "thread__put(t)", and "perf_event__preprocess_sample(&al)" with "addr_location__put(&al)". The addr_location__put() one is because as we return references to several data structures, we may end up adding more reference counting for the other data structures and then we'll drop it at addr_location__put() time. Acked-by: David Ahern <dsahern@gmail.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Borislav Petkov <bp@suse.de> Cc: Don Zickus <dzickus@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-bs9rt4n0jw3hi9f3zxyy3xln@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-04-07 07:43:22 +08:00
goto out_put;
}
if (add_sched_out_event(atoms, 'R', timestamp))
perf machine: Protect the machine->threads with a rwlock In addition to using refcounts for the struct thread lifetime management, we need to protect access to machine->threads from concurrent access. That happens in 'perf top', where a thread processes events, inserting and deleting entries from that rb_tree while another thread decays hist_entries, that end up dropping references and ultimately deleting threads from the rb_tree and releasing its resources when no further hist_entry (or other data structures, like in 'perf sched') references it. So the rule is the same for refcounts + protected trees in the kernel, get the tree lock, find object, bump the refcount, drop the tree lock, return, use object, drop the refcount if no more use of it is needed, keep it if storing it in some other data structure, drop when releasing that data structure. I.e. pair "t = machine__find(new)_thread()" with a "thread__put(t)", and "perf_event__preprocess_sample(&al)" with "addr_location__put(&al)". The addr_location__put() one is because as we return references to several data structures, we may end up adding more reference counting for the other data structures and then we'll drop it at addr_location__put() time. Acked-by: David Ahern <dsahern@gmail.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Borislav Petkov <bp@suse.de> Cc: Don Zickus <dzickus@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-bs9rt4n0jw3hi9f3zxyy3xln@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-04-07 07:43:22 +08:00
goto out_put;
}
perf sched: Don't read all tracepoint variables in advance Do it just at the actual consumer of these fields, that way we avoid needless lookups: [root@sandy ~]# perf sched record sleep 30s [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 8.585 MB perf.data (~375063 samples) ] Before: [root@sandy ~]# perf stat -r 10 perf sched lat > /dev/null Performance counter stats for 'perf sched lat' (10 runs): 103.592215 task-clock # 0.993 CPUs utilized ( +- 0.33% ) 12 context-switches # 0.114 K/sec ( +- 3.29% ) 0 cpu-migrations # 0.000 K/sec 7,605 page-faults # 0.073 M/sec ( +- 0.00% ) 345,796,112 cycles # 3.338 GHz ( +- 0.07% ) [82.90%] 106,876,796 stalled-cycles-frontend # 30.91% frontend cycles idle ( +- 0.38% ) [83.23%] 62,060,877 stalled-cycles-backend # 17.95% backend cycles idle ( +- 0.80% ) [67.14%] 628,246,586 instructions # 1.82 insns per cycle # 0.17 stalled cycles per insn ( +- 0.04% ) [83.64%] 134,962,057 branches # 1302.820 M/sec ( +- 0.10% ) [83.64%] 1,233,037 branch-misses # 0.91% of all branches ( +- 0.29% ) [83.41%] 0.104333272 seconds time elapsed ( +- 0.33% ) [root@sandy ~]# perf stat -r 10 perf sched lat > /dev/null Performance counter stats for 'perf sched lat' (10 runs): 98.848272 task-clock # 0.993 CPUs utilized ( +- 0.48% ) 11 context-switches # 0.112 K/sec ( +- 2.83% ) 0 cpu-migrations # 0.003 K/sec ( +- 50.92% ) 7,604 page-faults # 0.077 M/sec ( +- 0.00% ) 332,216,085 cycles # 3.361 GHz ( +- 0.14% ) [82.87%] 100,623,710 stalled-cycles-frontend # 30.29% frontend cycles idle ( +- 0.53% ) [82.95%] 58,788,692 stalled-cycles-backend # 17.70% backend cycles idle ( +- 0.59% ) [67.15%] 609,402,433 instructions # 1.83 insns per cycle # 0.17 stalled cycles per insn ( +- 0.04% ) [83.76%] 131,277,138 branches # 1328.067 M/sec ( +- 0.06% ) [83.77%] 1,117,871 branch-misses # 0.85% of all branches ( +- 0.32% ) [83.51%] 0.099580430 seconds time elapsed ( +- 0.48% ) [root@sandy ~]# Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Namhyung Kim <namhyung@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-kracdpw8wqlr0xjh75uk8g11@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-09-12 06:29:17 +08:00
add_runtime_event(atoms, runtime, timestamp);
perf machine: Protect the machine->threads with a rwlock In addition to using refcounts for the struct thread lifetime management, we need to protect access to machine->threads from concurrent access. That happens in 'perf top', where a thread processes events, inserting and deleting entries from that rb_tree while another thread decays hist_entries, that end up dropping references and ultimately deleting threads from the rb_tree and releasing its resources when no further hist_entry (or other data structures, like in 'perf sched') references it. So the rule is the same for refcounts + protected trees in the kernel, get the tree lock, find object, bump the refcount, drop the tree lock, return, use object, drop the refcount if no more use of it is needed, keep it if storing it in some other data structure, drop when releasing that data structure. I.e. pair "t = machine__find(new)_thread()" with a "thread__put(t)", and "perf_event__preprocess_sample(&al)" with "addr_location__put(&al)". The addr_location__put() one is because as we return references to several data structures, we may end up adding more reference counting for the other data structures and then we'll drop it at addr_location__put() time. Acked-by: David Ahern <dsahern@gmail.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Borislav Petkov <bp@suse.de> Cc: Don Zickus <dzickus@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-bs9rt4n0jw3hi9f3zxyy3xln@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-04-07 07:43:22 +08:00
err = 0;
out_put:
thread__put(thread);
return err;
}
perf sched: Don't read all tracepoint variables in advance Do it just at the actual consumer of these fields, that way we avoid needless lookups: [root@sandy ~]# perf sched record sleep 30s [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 8.585 MB perf.data (~375063 samples) ] Before: [root@sandy ~]# perf stat -r 10 perf sched lat > /dev/null Performance counter stats for 'perf sched lat' (10 runs): 103.592215 task-clock # 0.993 CPUs utilized ( +- 0.33% ) 12 context-switches # 0.114 K/sec ( +- 3.29% ) 0 cpu-migrations # 0.000 K/sec 7,605 page-faults # 0.073 M/sec ( +- 0.00% ) 345,796,112 cycles # 3.338 GHz ( +- 0.07% ) [82.90%] 106,876,796 stalled-cycles-frontend # 30.91% frontend cycles idle ( +- 0.38% ) [83.23%] 62,060,877 stalled-cycles-backend # 17.95% backend cycles idle ( +- 0.80% ) [67.14%] 628,246,586 instructions # 1.82 insns per cycle # 0.17 stalled cycles per insn ( +- 0.04% ) [83.64%] 134,962,057 branches # 1302.820 M/sec ( +- 0.10% ) [83.64%] 1,233,037 branch-misses # 0.91% of all branches ( +- 0.29% ) [83.41%] 0.104333272 seconds time elapsed ( +- 0.33% ) [root@sandy ~]# perf stat -r 10 perf sched lat > /dev/null Performance counter stats for 'perf sched lat' (10 runs): 98.848272 task-clock # 0.993 CPUs utilized ( +- 0.48% ) 11 context-switches # 0.112 K/sec ( +- 2.83% ) 0 cpu-migrations # 0.003 K/sec ( +- 50.92% ) 7,604 page-faults # 0.077 M/sec ( +- 0.00% ) 332,216,085 cycles # 3.361 GHz ( +- 0.14% ) [82.87%] 100,623,710 stalled-cycles-frontend # 30.29% frontend cycles idle ( +- 0.53% ) [82.95%] 58,788,692 stalled-cycles-backend # 17.70% backend cycles idle ( +- 0.59% ) [67.15%] 609,402,433 instructions # 1.83 insns per cycle # 0.17 stalled cycles per insn ( +- 0.04% ) [83.76%] 131,277,138 branches # 1328.067 M/sec ( +- 0.06% ) [83.77%] 1,117,871 branch-misses # 0.85% of all branches ( +- 0.32% ) [83.51%] 0.099580430 seconds time elapsed ( +- 0.48% ) [root@sandy ~]# Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Namhyung Kim <namhyung@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-kracdpw8wqlr0xjh75uk8g11@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-09-12 06:29:17 +08:00
static int latency_wakeup_event(struct perf_sched *sched,
struct evsel *evsel,
perf sched: Don't read all tracepoint variables in advance Do it just at the actual consumer of these fields, that way we avoid needless lookups: [root@sandy ~]# perf sched record sleep 30s [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 8.585 MB perf.data (~375063 samples) ] Before: [root@sandy ~]# perf stat -r 10 perf sched lat > /dev/null Performance counter stats for 'perf sched lat' (10 runs): 103.592215 task-clock # 0.993 CPUs utilized ( +- 0.33% ) 12 context-switches # 0.114 K/sec ( +- 3.29% ) 0 cpu-migrations # 0.000 K/sec 7,605 page-faults # 0.073 M/sec ( +- 0.00% ) 345,796,112 cycles # 3.338 GHz ( +- 0.07% ) [82.90%] 106,876,796 stalled-cycles-frontend # 30.91% frontend cycles idle ( +- 0.38% ) [83.23%] 62,060,877 stalled-cycles-backend # 17.95% backend cycles idle ( +- 0.80% ) [67.14%] 628,246,586 instructions # 1.82 insns per cycle # 0.17 stalled cycles per insn ( +- 0.04% ) [83.64%] 134,962,057 branches # 1302.820 M/sec ( +- 0.10% ) [83.64%] 1,233,037 branch-misses # 0.91% of all branches ( +- 0.29% ) [83.41%] 0.104333272 seconds time elapsed ( +- 0.33% ) [root@sandy ~]# perf stat -r 10 perf sched lat > /dev/null Performance counter stats for 'perf sched lat' (10 runs): 98.848272 task-clock # 0.993 CPUs utilized ( +- 0.48% ) 11 context-switches # 0.112 K/sec ( +- 2.83% ) 0 cpu-migrations # 0.003 K/sec ( +- 50.92% ) 7,604 page-faults # 0.077 M/sec ( +- 0.00% ) 332,216,085 cycles # 3.361 GHz ( +- 0.14% ) [82.87%] 100,623,710 stalled-cycles-frontend # 30.29% frontend cycles idle ( +- 0.53% ) [82.95%] 58,788,692 stalled-cycles-backend # 17.70% backend cycles idle ( +- 0.59% ) [67.15%] 609,402,433 instructions # 1.83 insns per cycle # 0.17 stalled cycles per insn ( +- 0.04% ) [83.76%] 131,277,138 branches # 1328.067 M/sec ( +- 0.06% ) [83.77%] 1,117,871 branch-misses # 0.85% of all branches ( +- 0.32% ) [83.51%] 0.099580430 seconds time elapsed ( +- 0.48% ) [root@sandy ~]# Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Namhyung Kim <namhyung@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-kracdpw8wqlr0xjh75uk8g11@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-09-12 06:29:17 +08:00
struct perf_sample *sample,
struct machine *machine)
{
const u32 pid = perf_evsel__intval(evsel, sample, "pid");
perf sched: Add support for sched:sched_stat_runtime events This allows more precise 'perf sched latency' output: --------------------------------------------------------------------------------------- Task | Runtime ms | Switches | Average delay ms | Maximum delay ms | --------------------------------------------------------------------------------------- ksoftirqd/0-4 | 0.010 ms | 2 | avg: 2.476 ms | max: 2.977 ms | perf-12328 | 15.844 ms | 66 | avg: 1.118 ms | max: 9.979 ms | bdi-default-235 | 0.009 ms | 1 | avg: 0.998 ms | max: 0.998 ms | events/1-8 | 0.020 ms | 2 | avg: 0.998 ms | max: 0.998 ms | events/0-7 | 0.018 ms | 2 | avg: 0.992 ms | max: 0.996 ms | sleep-12329 | 0.742 ms | 3 | avg: 0.906 ms | max: 2.289 ms | sshd-12122 | 0.163 ms | 2 | avg: 0.283 ms | max: 0.562 ms | loop-getpid-lon-12322 | 1023.636 ms | 69 | avg: 0.208 ms | max: 5.996 ms | loop-getpid-lon-12321 | 1038.638 ms | 5 | avg: 0.073 ms | max: 0.171 ms | migration/1-5 | 0.000 ms | 1 | avg: 0.006 ms | max: 0.006 ms | --------------------------------------------------------------------------------------- TOTAL: | 2079.078 ms | 153 | ------------------------------------------------- Also, streamline the code a bit more, add asserts for various state machine failures (they should be debugged if they occur) and fix a few odd ends. Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-15 02:04:48 +08:00
struct work_atoms *atoms;
struct work_atom *atom;
struct thread *wakee;
u64 timestamp = sample->time;
perf machine: Protect the machine->threads with a rwlock In addition to using refcounts for the struct thread lifetime management, we need to protect access to machine->threads from concurrent access. That happens in 'perf top', where a thread processes events, inserting and deleting entries from that rb_tree while another thread decays hist_entries, that end up dropping references and ultimately deleting threads from the rb_tree and releasing its resources when no further hist_entry (or other data structures, like in 'perf sched') references it. So the rule is the same for refcounts + protected trees in the kernel, get the tree lock, find object, bump the refcount, drop the tree lock, return, use object, drop the refcount if no more use of it is needed, keep it if storing it in some other data structure, drop when releasing that data structure. I.e. pair "t = machine__find(new)_thread()" with a "thread__put(t)", and "perf_event__preprocess_sample(&al)" with "addr_location__put(&al)". The addr_location__put() one is because as we return references to several data structures, we may end up adding more reference counting for the other data structures and then we'll drop it at addr_location__put() time. Acked-by: David Ahern <dsahern@gmail.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Borislav Petkov <bp@suse.de> Cc: Don Zickus <dzickus@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-bs9rt4n0jw3hi9f3zxyy3xln@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-04-07 07:43:22 +08:00
int err = -1;
wakee = machine__findnew_thread(machine, -1, pid);
perf machine: Protect the machine->threads with a rwlock In addition to using refcounts for the struct thread lifetime management, we need to protect access to machine->threads from concurrent access. That happens in 'perf top', where a thread processes events, inserting and deleting entries from that rb_tree while another thread decays hist_entries, that end up dropping references and ultimately deleting threads from the rb_tree and releasing its resources when no further hist_entry (or other data structures, like in 'perf sched') references it. So the rule is the same for refcounts + protected trees in the kernel, get the tree lock, find object, bump the refcount, drop the tree lock, return, use object, drop the refcount if no more use of it is needed, keep it if storing it in some other data structure, drop when releasing that data structure. I.e. pair "t = machine__find(new)_thread()" with a "thread__put(t)", and "perf_event__preprocess_sample(&al)" with "addr_location__put(&al)". The addr_location__put() one is because as we return references to several data structures, we may end up adding more reference counting for the other data structures and then we'll drop it at addr_location__put() time. Acked-by: David Ahern <dsahern@gmail.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Borislav Petkov <bp@suse.de> Cc: Don Zickus <dzickus@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-bs9rt4n0jw3hi9f3zxyy3xln@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-04-07 07:43:22 +08:00
if (wakee == NULL)
return -1;
atoms = thread_atoms_search(&sched->atom_root, wakee, &sched->cmp_pid);
if (!atoms) {
if (thread_atoms_insert(sched, wakee))
perf machine: Protect the machine->threads with a rwlock In addition to using refcounts for the struct thread lifetime management, we need to protect access to machine->threads from concurrent access. That happens in 'perf top', where a thread processes events, inserting and deleting entries from that rb_tree while another thread decays hist_entries, that end up dropping references and ultimately deleting threads from the rb_tree and releasing its resources when no further hist_entry (or other data structures, like in 'perf sched') references it. So the rule is the same for refcounts + protected trees in the kernel, get the tree lock, find object, bump the refcount, drop the tree lock, return, use object, drop the refcount if no more use of it is needed, keep it if storing it in some other data structure, drop when releasing that data structure. I.e. pair "t = machine__find(new)_thread()" with a "thread__put(t)", and "perf_event__preprocess_sample(&al)" with "addr_location__put(&al)". The addr_location__put() one is because as we return references to several data structures, we may end up adding more reference counting for the other data structures and then we'll drop it at addr_location__put() time. Acked-by: David Ahern <dsahern@gmail.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Borislav Petkov <bp@suse.de> Cc: Don Zickus <dzickus@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-bs9rt4n0jw3hi9f3zxyy3xln@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-04-07 07:43:22 +08:00
goto out_put;
atoms = thread_atoms_search(&sched->atom_root, wakee, &sched->cmp_pid);
if (!atoms) {
pr_err("wakeup-event: Internal tree error");
perf machine: Protect the machine->threads with a rwlock In addition to using refcounts for the struct thread lifetime management, we need to protect access to machine->threads from concurrent access. That happens in 'perf top', where a thread processes events, inserting and deleting entries from that rb_tree while another thread decays hist_entries, that end up dropping references and ultimately deleting threads from the rb_tree and releasing its resources when no further hist_entry (or other data structures, like in 'perf sched') references it. So the rule is the same for refcounts + protected trees in the kernel, get the tree lock, find object, bump the refcount, drop the tree lock, return, use object, drop the refcount if no more use of it is needed, keep it if storing it in some other data structure, drop when releasing that data structure. I.e. pair "t = machine__find(new)_thread()" with a "thread__put(t)", and "perf_event__preprocess_sample(&al)" with "addr_location__put(&al)". The addr_location__put() one is because as we return references to several data structures, we may end up adding more reference counting for the other data structures and then we'll drop it at addr_location__put() time. Acked-by: David Ahern <dsahern@gmail.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Borislav Petkov <bp@suse.de> Cc: Don Zickus <dzickus@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-bs9rt4n0jw3hi9f3zxyy3xln@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-04-07 07:43:22 +08:00
goto out_put;
}
if (add_sched_out_event(atoms, 'S', timestamp))
perf machine: Protect the machine->threads with a rwlock In addition to using refcounts for the struct thread lifetime management, we need to protect access to machine->threads from concurrent access. That happens in 'perf top', where a thread processes events, inserting and deleting entries from that rb_tree while another thread decays hist_entries, that end up dropping references and ultimately deleting threads from the rb_tree and releasing its resources when no further hist_entry (or other data structures, like in 'perf sched') references it. So the rule is the same for refcounts + protected trees in the kernel, get the tree lock, find object, bump the refcount, drop the tree lock, return, use object, drop the refcount if no more use of it is needed, keep it if storing it in some other data structure, drop when releasing that data structure. I.e. pair "t = machine__find(new)_thread()" with a "thread__put(t)", and "perf_event__preprocess_sample(&al)" with "addr_location__put(&al)". The addr_location__put() one is because as we return references to several data structures, we may end up adding more reference counting for the other data structures and then we'll drop it at addr_location__put() time. Acked-by: David Ahern <dsahern@gmail.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Borislav Petkov <bp@suse.de> Cc: Don Zickus <dzickus@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-bs9rt4n0jw3hi9f3zxyy3xln@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-04-07 07:43:22 +08:00
goto out_put;
}
perf sched: Add support for sched:sched_stat_runtime events This allows more precise 'perf sched latency' output: --------------------------------------------------------------------------------------- Task | Runtime ms | Switches | Average delay ms | Maximum delay ms | --------------------------------------------------------------------------------------- ksoftirqd/0-4 | 0.010 ms | 2 | avg: 2.476 ms | max: 2.977 ms | perf-12328 | 15.844 ms | 66 | avg: 1.118 ms | max: 9.979 ms | bdi-default-235 | 0.009 ms | 1 | avg: 0.998 ms | max: 0.998 ms | events/1-8 | 0.020 ms | 2 | avg: 0.998 ms | max: 0.998 ms | events/0-7 | 0.018 ms | 2 | avg: 0.992 ms | max: 0.996 ms | sleep-12329 | 0.742 ms | 3 | avg: 0.906 ms | max: 2.289 ms | sshd-12122 | 0.163 ms | 2 | avg: 0.283 ms | max: 0.562 ms | loop-getpid-lon-12322 | 1023.636 ms | 69 | avg: 0.208 ms | max: 5.996 ms | loop-getpid-lon-12321 | 1038.638 ms | 5 | avg: 0.073 ms | max: 0.171 ms | migration/1-5 | 0.000 ms | 1 | avg: 0.006 ms | max: 0.006 ms | --------------------------------------------------------------------------------------- TOTAL: | 2079.078 ms | 153 | ------------------------------------------------- Also, streamline the code a bit more, add asserts for various state machine failures (they should be debugged if they occur) and fix a few odd ends. Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-15 02:04:48 +08:00
BUG_ON(list_empty(&atoms->work_list));
perf sched: Add support for sched:sched_stat_runtime events This allows more precise 'perf sched latency' output: --------------------------------------------------------------------------------------- Task | Runtime ms | Switches | Average delay ms | Maximum delay ms | --------------------------------------------------------------------------------------- ksoftirqd/0-4 | 0.010 ms | 2 | avg: 2.476 ms | max: 2.977 ms | perf-12328 | 15.844 ms | 66 | avg: 1.118 ms | max: 9.979 ms | bdi-default-235 | 0.009 ms | 1 | avg: 0.998 ms | max: 0.998 ms | events/1-8 | 0.020 ms | 2 | avg: 0.998 ms | max: 0.998 ms | events/0-7 | 0.018 ms | 2 | avg: 0.992 ms | max: 0.996 ms | sleep-12329 | 0.742 ms | 3 | avg: 0.906 ms | max: 2.289 ms | sshd-12122 | 0.163 ms | 2 | avg: 0.283 ms | max: 0.562 ms | loop-getpid-lon-12322 | 1023.636 ms | 69 | avg: 0.208 ms | max: 5.996 ms | loop-getpid-lon-12321 | 1038.638 ms | 5 | avg: 0.073 ms | max: 0.171 ms | migration/1-5 | 0.000 ms | 1 | avg: 0.006 ms | max: 0.006 ms | --------------------------------------------------------------------------------------- TOTAL: | 2079.078 ms | 153 | ------------------------------------------------- Also, streamline the code a bit more, add asserts for various state machine failures (they should be debugged if they occur) and fix a few odd ends. Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-15 02:04:48 +08:00
atom = list_entry(atoms->work_list.prev, struct work_atom, list);
perf sched: Add -C option to measure on a specific CPU To refresh, trying to sched record only one CPU results in bogus latencies as below. I fixed^Wmade it stop doing the bad thing today, by following task migration events properly. Before: marge:/root/tmp # taskset -c 1 perf sched record -C 0 -- sleep 10 marge:/root/tmp # perf sched lat ----------------------------------------------------------------------------------------- Task | Runtime ms | Switches | Average delay ms | Maximum delay ms | ----------------------------------------------------------------------------------------- Xorg:4943 | 1.290 ms | 1 | avg: 1670.132 ms | max: 1670.132 ms | hald-addon-stor:3569 | 0.091 ms | 3 | avg: 658.609 ms | max: 1975.797 ms | hald-addon-stor:3573 | 0.209 ms | 4 | avg: 499.138 ms | max: 1990.565 ms | audispd:4270 | 0.012 ms | 1 | avg: 0.015 ms | max: 0.015 ms | .... marge:/root/tmp # perf sched trace|grep 'Xorg:4943' swapper-0 [000] 401.184013288: sched_stat_runtime: task: Xorg:4943 runtime: 1233188 [ns], vruntime: 19105169779 [ns] rt2870TimerQHan-4947 [000] 402.854140127: sched_stat_wait: task: Xorg:4943 wait: 580073 [ns] rt2870TimerQHan-4947 [000] 402.854141770: sched_migrate_task: task Xorg:4943 [140] from: 1 to: 0 rt2870TimerQHan-4947 [000] 402.854143854: sched_stat_wait: task: Xorg:4943 wait: 0 [ns] rt2870TimerQHan-4947 [000] 402.854145397: sched_switch: task rt2870TimerQHan:4947 [140] (D) ==> Xorg:4943 [140] Xorg-4943 [000] 402.854193133: sched_stat_runtime: task: Xorg:4943 runtime: 56546 [ns], vruntime: 11766332500 [ns] Xorg-4943 [000] 402.854196842: sched_switch: task Xorg:4943 [140] (S) ==> swapper:0 [140] After: marge:/root/tmp # taskset -c 1 perf sched record -C 0 -- sleep 10 marge:/root/tmp # perf sched lat ----------------------------------------------------------------------------------------- Task | Runtime ms | Switches | Average delay ms | Maximum delay ms | ----------------------------------------------------------------------------------------- amarokapp:11150 | 271.297 ms | 878 | avg: 0.130 ms | max: 1.057 ms | konsole:5965 | 1.370 ms | 12 | avg: 0.092 ms | max: 0.855 ms | Xorg:4943 | 179.980 ms | 1109 | avg: 0.087 ms | max: 1.206 ms | hald-addon-stor:3574 | 0.212 ms | 9 | avg: 0.040 ms | max: 0.169 ms | hald-addon-stor:3570 | 0.223 ms | 9 | avg: 0.037 ms | max: 0.223 ms | klauncher:5864 | 0.550 ms | 8 | avg: 0.032 ms | max: 0.048 ms | The 'Maximum delay ms' results are now sane. Signed-off-by: Mike Galbraith <efault@gmx.de> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-10 20:46:04 +08:00
/*
* As we do not guarantee the wakeup event happens when
* task is out of run queue, also may happen when task is
* on run queue and wakeup only change ->state to TASK_RUNNING,
* then we should not set the ->wake_up_time when wake up a
* task which is on run queue.
*
perf sched: Add -C option to measure on a specific CPU To refresh, trying to sched record only one CPU results in bogus latencies as below. I fixed^Wmade it stop doing the bad thing today, by following task migration events properly. Before: marge:/root/tmp # taskset -c 1 perf sched record -C 0 -- sleep 10 marge:/root/tmp # perf sched lat ----------------------------------------------------------------------------------------- Task | Runtime ms | Switches | Average delay ms | Maximum delay ms | ----------------------------------------------------------------------------------------- Xorg:4943 | 1.290 ms | 1 | avg: 1670.132 ms | max: 1670.132 ms | hald-addon-stor:3569 | 0.091 ms | 3 | avg: 658.609 ms | max: 1975.797 ms | hald-addon-stor:3573 | 0.209 ms | 4 | avg: 499.138 ms | max: 1990.565 ms | audispd:4270 | 0.012 ms | 1 | avg: 0.015 ms | max: 0.015 ms | .... marge:/root/tmp # perf sched trace|grep 'Xorg:4943' swapper-0 [000] 401.184013288: sched_stat_runtime: task: Xorg:4943 runtime: 1233188 [ns], vruntime: 19105169779 [ns] rt2870TimerQHan-4947 [000] 402.854140127: sched_stat_wait: task: Xorg:4943 wait: 580073 [ns] rt2870TimerQHan-4947 [000] 402.854141770: sched_migrate_task: task Xorg:4943 [140] from: 1 to: 0 rt2870TimerQHan-4947 [000] 402.854143854: sched_stat_wait: task: Xorg:4943 wait: 0 [ns] rt2870TimerQHan-4947 [000] 402.854145397: sched_switch: task rt2870TimerQHan:4947 [140] (D) ==> Xorg:4943 [140] Xorg-4943 [000] 402.854193133: sched_stat_runtime: task: Xorg:4943 runtime: 56546 [ns], vruntime: 11766332500 [ns] Xorg-4943 [000] 402.854196842: sched_switch: task Xorg:4943 [140] (S) ==> swapper:0 [140] After: marge:/root/tmp # taskset -c 1 perf sched record -C 0 -- sleep 10 marge:/root/tmp # perf sched lat ----------------------------------------------------------------------------------------- Task | Runtime ms | Switches | Average delay ms | Maximum delay ms | ----------------------------------------------------------------------------------------- amarokapp:11150 | 271.297 ms | 878 | avg: 0.130 ms | max: 1.057 ms | konsole:5965 | 1.370 ms | 12 | avg: 0.092 ms | max: 0.855 ms | Xorg:4943 | 179.980 ms | 1109 | avg: 0.087 ms | max: 1.206 ms | hald-addon-stor:3574 | 0.212 ms | 9 | avg: 0.040 ms | max: 0.169 ms | hald-addon-stor:3570 | 0.223 ms | 9 | avg: 0.037 ms | max: 0.223 ms | klauncher:5864 | 0.550 ms | 8 | avg: 0.032 ms | max: 0.048 ms | The 'Maximum delay ms' results are now sane. Signed-off-by: Mike Galbraith <efault@gmx.de> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-10 20:46:04 +08:00
* You WILL be missing events if you've recorded only
* one CPU, or are only looking at only one, so don't
* skip in this case.
perf sched: Add -C option to measure on a specific CPU To refresh, trying to sched record only one CPU results in bogus latencies as below. I fixed^Wmade it stop doing the bad thing today, by following task migration events properly. Before: marge:/root/tmp # taskset -c 1 perf sched record -C 0 -- sleep 10 marge:/root/tmp # perf sched lat ----------------------------------------------------------------------------------------- Task | Runtime ms | Switches | Average delay ms | Maximum delay ms | ----------------------------------------------------------------------------------------- Xorg:4943 | 1.290 ms | 1 | avg: 1670.132 ms | max: 1670.132 ms | hald-addon-stor:3569 | 0.091 ms | 3 | avg: 658.609 ms | max: 1975.797 ms | hald-addon-stor:3573 | 0.209 ms | 4 | avg: 499.138 ms | max: 1990.565 ms | audispd:4270 | 0.012 ms | 1 | avg: 0.015 ms | max: 0.015 ms | .... marge:/root/tmp # perf sched trace|grep 'Xorg:4943' swapper-0 [000] 401.184013288: sched_stat_runtime: task: Xorg:4943 runtime: 1233188 [ns], vruntime: 19105169779 [ns] rt2870TimerQHan-4947 [000] 402.854140127: sched_stat_wait: task: Xorg:4943 wait: 580073 [ns] rt2870TimerQHan-4947 [000] 402.854141770: sched_migrate_task: task Xorg:4943 [140] from: 1 to: 0 rt2870TimerQHan-4947 [000] 402.854143854: sched_stat_wait: task: Xorg:4943 wait: 0 [ns] rt2870TimerQHan-4947 [000] 402.854145397: sched_switch: task rt2870TimerQHan:4947 [140] (D) ==> Xorg:4943 [140] Xorg-4943 [000] 402.854193133: sched_stat_runtime: task: Xorg:4943 runtime: 56546 [ns], vruntime: 11766332500 [ns] Xorg-4943 [000] 402.854196842: sched_switch: task Xorg:4943 [140] (S) ==> swapper:0 [140] After: marge:/root/tmp # taskset -c 1 perf sched record -C 0 -- sleep 10 marge:/root/tmp # perf sched lat ----------------------------------------------------------------------------------------- Task | Runtime ms | Switches | Average delay ms | Maximum delay ms | ----------------------------------------------------------------------------------------- amarokapp:11150 | 271.297 ms | 878 | avg: 0.130 ms | max: 1.057 ms | konsole:5965 | 1.370 ms | 12 | avg: 0.092 ms | max: 0.855 ms | Xorg:4943 | 179.980 ms | 1109 | avg: 0.087 ms | max: 1.206 ms | hald-addon-stor:3574 | 0.212 ms | 9 | avg: 0.040 ms | max: 0.169 ms | hald-addon-stor:3570 | 0.223 ms | 9 | avg: 0.037 ms | max: 0.223 ms | klauncher:5864 | 0.550 ms | 8 | avg: 0.032 ms | max: 0.048 ms | The 'Maximum delay ms' results are now sane. Signed-off-by: Mike Galbraith <efault@gmx.de> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-10 20:46:04 +08:00
*/
if (sched->profile_cpu == -1 && atom->state != THREAD_SLEEPING)
perf machine: Protect the machine->threads with a rwlock In addition to using refcounts for the struct thread lifetime management, we need to protect access to machine->threads from concurrent access. That happens in 'perf top', where a thread processes events, inserting and deleting entries from that rb_tree while another thread decays hist_entries, that end up dropping references and ultimately deleting threads from the rb_tree and releasing its resources when no further hist_entry (or other data structures, like in 'perf sched') references it. So the rule is the same for refcounts + protected trees in the kernel, get the tree lock, find object, bump the refcount, drop the tree lock, return, use object, drop the refcount if no more use of it is needed, keep it if storing it in some other data structure, drop when releasing that data structure. I.e. pair "t = machine__find(new)_thread()" with a "thread__put(t)", and "perf_event__preprocess_sample(&al)" with "addr_location__put(&al)". The addr_location__put() one is because as we return references to several data structures, we may end up adding more reference counting for the other data structures and then we'll drop it at addr_location__put() time. Acked-by: David Ahern <dsahern@gmail.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Borislav Petkov <bp@suse.de> Cc: Don Zickus <dzickus@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-bs9rt4n0jw3hi9f3zxyy3xln@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-04-07 07:43:22 +08:00
goto out_ok;
sched->nr_timestamps++;
perf tools: Implement counter output multiplexing Finish the -M/--multiplex option implementation: - separate it out from group_fd - correctly set it via the ioctl and dont mmap counters that are multiplexed - modify the perf record event loop to deal with buffer-less counters. - remove the -g option from perf sched record - account for unordered events in perf sched latency - (add -f to perf sched record to ease measurements) - skip idle threads (pid==0) in latency output The result is better latency output by 'perf sched latency': ----------------------------------------------------------------------------------- Task | Runtime ms | Switches | Average delay ms | Maximum delay ms | ----------------------------------------------------------------------------------- ksoftirqd/8 | 0.071 ms | 2 | avg: 0.458 ms | max: 0.913 ms | at-spi-registry | 0.609 ms | 19 | avg: 0.013 ms | max: 0.023 ms | perf | 3.316 ms | 16 | avg: 0.013 ms | max: 0.054 ms | Xorg | 0.392 ms | 19 | avg: 0.011 ms | max: 0.018 ms | sleep | 0.537 ms | 2 | avg: 0.009 ms | max: 0.009 ms | ----------------------------------------------------------------------------------- TOTAL: | 4.925 ms | 58 | --------------------------------------------- Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-14 00:15:54 +08:00
if (atom->sched_out_time > timestamp) {
sched->nr_unordered_timestamps++;
perf machine: Protect the machine->threads with a rwlock In addition to using refcounts for the struct thread lifetime management, we need to protect access to machine->threads from concurrent access. That happens in 'perf top', where a thread processes events, inserting and deleting entries from that rb_tree while another thread decays hist_entries, that end up dropping references and ultimately deleting threads from the rb_tree and releasing its resources when no further hist_entry (or other data structures, like in 'perf sched') references it. So the rule is the same for refcounts + protected trees in the kernel, get the tree lock, find object, bump the refcount, drop the tree lock, return, use object, drop the refcount if no more use of it is needed, keep it if storing it in some other data structure, drop when releasing that data structure. I.e. pair "t = machine__find(new)_thread()" with a "thread__put(t)", and "perf_event__preprocess_sample(&al)" with "addr_location__put(&al)". The addr_location__put() one is because as we return references to several data structures, we may end up adding more reference counting for the other data structures and then we'll drop it at addr_location__put() time. Acked-by: David Ahern <dsahern@gmail.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Borislav Petkov <bp@suse.de> Cc: Don Zickus <dzickus@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-bs9rt4n0jw3hi9f3zxyy3xln@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-04-07 07:43:22 +08:00
goto out_ok;
perf tools: Implement counter output multiplexing Finish the -M/--multiplex option implementation: - separate it out from group_fd - correctly set it via the ioctl and dont mmap counters that are multiplexed - modify the perf record event loop to deal with buffer-less counters. - remove the -g option from perf sched record - account for unordered events in perf sched latency - (add -f to perf sched record to ease measurements) - skip idle threads (pid==0) in latency output The result is better latency output by 'perf sched latency': ----------------------------------------------------------------------------------- Task | Runtime ms | Switches | Average delay ms | Maximum delay ms | ----------------------------------------------------------------------------------- ksoftirqd/8 | 0.071 ms | 2 | avg: 0.458 ms | max: 0.913 ms | at-spi-registry | 0.609 ms | 19 | avg: 0.013 ms | max: 0.023 ms | perf | 3.316 ms | 16 | avg: 0.013 ms | max: 0.054 ms | Xorg | 0.392 ms | 19 | avg: 0.011 ms | max: 0.018 ms | sleep | 0.537 ms | 2 | avg: 0.009 ms | max: 0.009 ms | ----------------------------------------------------------------------------------- TOTAL: | 4.925 ms | 58 | --------------------------------------------- Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-14 00:15:54 +08:00
}
perf tools: Fix processing of randomly serialized sched traces Currently it's possible to meet such too high latency results with 'perf sched latency'. ----------------------------------------------------------------------------------- Task | Runtime ms | Switches | Average delay ms | Maximum delay ms | ----------------------------------------------------------------------------------- xfce4-panel | 0.222 ms | 2 | avg: 4718.345 ms | max: 9436.493 ms | scsi_eh_3 | 3.962 ms | 36 | avg: 55.957 ms | max: 1977.829 ms | The origin is on traces that are sometimes badly serialized across cpus. For example the raw traces that raised such results for xfce4-panel: (1) [init]-0 [000] 1494.663899990: sched_switch: task swapper:0 [140] (R) ==> xfce4-panel:4569 [120] (2) xfce4-panel-4569 [000] 1494.663928373: sched_switch: task xfce4-panel:4569 [120] (S) ==> swapper:0 [140] (3) Xorg-4276 [001] 1494.663860125: sched_wakeup: task xfce4-panel:4569 [120] success=1 [000] (4) Xorg-4276 [001] 1504.098252756: sched_wakeup: task xfce4-panel:4569 [120] success=1 [000] (5) perf-5219 [000] 1504.100353302: sched_switch: task perf:5219 [120] (S) ==> xfce4-panel:4569 [120] The traces are processed in the order they arrive. Then in (2), xfce4-panel sleeps, it is first waken up in (3) and eventually scheduled in (5). The latency reported is then 1504 - 1495 = 9 secs, as reported by perf sched. But this is wrong, we are confident in the fact the traces are nicely serialized while we should actually more trust the timestamps. If we reorder by timestamps we get: (1) Xorg-4276 [001] 1494.663860125: sched_wakeup: task xfce4-panel:4569 [120] success=1 [000] (2) [init]-0 [000] 1494.663899990: sched_switch: task swapper:0 [140] (R) ==> xfce4-panel:4569 [120] (3) xfce4-panel-4569 [000] 1494.663928373: sched_switch: task xfce4-panel:4569 [120] (S) ==> swapper:0 [140] (4) Xorg-4276 [001] 1504.098252756: sched_wakeup: task xfce4-panel:4569 [120] success=1 [000] (5) perf-5219 [000] 1504.100353302: sched_switch: task perf:5219 [120] (S) ==> xfce4-panel:4569 [120] Now the trace make more sense, xfce4-panel is sleeping. Then it is woken up in (1), scheduled in (2) It goes to sleep in (3), woken up in (4) and scheduled in (5). Now, latency captured between (1) and (2) is of 39 us. And between (4) and (5) it is 2.1 ms. Such pattern of bad serializing is the origin of the high latencies reported by perf sched. Basically, we need to check whether wake up time is higher than schedule out time. If it's not the case, we need to tag the current work atom as invalid. Beside that, we may need to work later on a better ordering of the traces given by the kernel. After this patch: xfce4-session | 0.221 ms | 1 | avg: 0.538 ms | max: 0.538 ms | Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-14 09:01:12 +08:00
atom->state = THREAD_WAIT_CPU;
atom->wake_up_time = timestamp;
perf machine: Protect the machine->threads with a rwlock In addition to using refcounts for the struct thread lifetime management, we need to protect access to machine->threads from concurrent access. That happens in 'perf top', where a thread processes events, inserting and deleting entries from that rb_tree while another thread decays hist_entries, that end up dropping references and ultimately deleting threads from the rb_tree and releasing its resources when no further hist_entry (or other data structures, like in 'perf sched') references it. So the rule is the same for refcounts + protected trees in the kernel, get the tree lock, find object, bump the refcount, drop the tree lock, return, use object, drop the refcount if no more use of it is needed, keep it if storing it in some other data structure, drop when releasing that data structure. I.e. pair "t = machine__find(new)_thread()" with a "thread__put(t)", and "perf_event__preprocess_sample(&al)" with "addr_location__put(&al)". The addr_location__put() one is because as we return references to several data structures, we may end up adding more reference counting for the other data structures and then we'll drop it at addr_location__put() time. Acked-by: David Ahern <dsahern@gmail.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Borislav Petkov <bp@suse.de> Cc: Don Zickus <dzickus@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-bs9rt4n0jw3hi9f3zxyy3xln@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-04-07 07:43:22 +08:00
out_ok:
err = 0;
out_put:
thread__put(wakee);
return err;
}
perf sched: Don't read all tracepoint variables in advance Do it just at the actual consumer of these fields, that way we avoid needless lookups: [root@sandy ~]# perf sched record sleep 30s [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 8.585 MB perf.data (~375063 samples) ] Before: [root@sandy ~]# perf stat -r 10 perf sched lat > /dev/null Performance counter stats for 'perf sched lat' (10 runs): 103.592215 task-clock # 0.993 CPUs utilized ( +- 0.33% ) 12 context-switches # 0.114 K/sec ( +- 3.29% ) 0 cpu-migrations # 0.000 K/sec 7,605 page-faults # 0.073 M/sec ( +- 0.00% ) 345,796,112 cycles # 3.338 GHz ( +- 0.07% ) [82.90%] 106,876,796 stalled-cycles-frontend # 30.91% frontend cycles idle ( +- 0.38% ) [83.23%] 62,060,877 stalled-cycles-backend # 17.95% backend cycles idle ( +- 0.80% ) [67.14%] 628,246,586 instructions # 1.82 insns per cycle # 0.17 stalled cycles per insn ( +- 0.04% ) [83.64%] 134,962,057 branches # 1302.820 M/sec ( +- 0.10% ) [83.64%] 1,233,037 branch-misses # 0.91% of all branches ( +- 0.29% ) [83.41%] 0.104333272 seconds time elapsed ( +- 0.33% ) [root@sandy ~]# perf stat -r 10 perf sched lat > /dev/null Performance counter stats for 'perf sched lat' (10 runs): 98.848272 task-clock # 0.993 CPUs utilized ( +- 0.48% ) 11 context-switches # 0.112 K/sec ( +- 2.83% ) 0 cpu-migrations # 0.003 K/sec ( +- 50.92% ) 7,604 page-faults # 0.077 M/sec ( +- 0.00% ) 332,216,085 cycles # 3.361 GHz ( +- 0.14% ) [82.87%] 100,623,710 stalled-cycles-frontend # 30.29% frontend cycles idle ( +- 0.53% ) [82.95%] 58,788,692 stalled-cycles-backend # 17.70% backend cycles idle ( +- 0.59% ) [67.15%] 609,402,433 instructions # 1.83 insns per cycle # 0.17 stalled cycles per insn ( +- 0.04% ) [83.76%] 131,277,138 branches # 1328.067 M/sec ( +- 0.06% ) [83.77%] 1,117,871 branch-misses # 0.85% of all branches ( +- 0.32% ) [83.51%] 0.099580430 seconds time elapsed ( +- 0.48% ) [root@sandy ~]# Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Namhyung Kim <namhyung@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-kracdpw8wqlr0xjh75uk8g11@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-09-12 06:29:17 +08:00
static int latency_migrate_task_event(struct perf_sched *sched,
struct evsel *evsel,
perf sched: Don't read all tracepoint variables in advance Do it just at the actual consumer of these fields, that way we avoid needless lookups: [root@sandy ~]# perf sched record sleep 30s [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 8.585 MB perf.data (~375063 samples) ] Before: [root@sandy ~]# perf stat -r 10 perf sched lat > /dev/null Performance counter stats for 'perf sched lat' (10 runs): 103.592215 task-clock # 0.993 CPUs utilized ( +- 0.33% ) 12 context-switches # 0.114 K/sec ( +- 3.29% ) 0 cpu-migrations # 0.000 K/sec 7,605 page-faults # 0.073 M/sec ( +- 0.00% ) 345,796,112 cycles # 3.338 GHz ( +- 0.07% ) [82.90%] 106,876,796 stalled-cycles-frontend # 30.91% frontend cycles idle ( +- 0.38% ) [83.23%] 62,060,877 stalled-cycles-backend # 17.95% backend cycles idle ( +- 0.80% ) [67.14%] 628,246,586 instructions # 1.82 insns per cycle # 0.17 stalled cycles per insn ( +- 0.04% ) [83.64%] 134,962,057 branches # 1302.820 M/sec ( +- 0.10% ) [83.64%] 1,233,037 branch-misses # 0.91% of all branches ( +- 0.29% ) [83.41%] 0.104333272 seconds time elapsed ( +- 0.33% ) [root@sandy ~]# perf stat -r 10 perf sched lat > /dev/null Performance counter stats for 'perf sched lat' (10 runs): 98.848272 task-clock # 0.993 CPUs utilized ( +- 0.48% ) 11 context-switches # 0.112 K/sec ( +- 2.83% ) 0 cpu-migrations # 0.003 K/sec ( +- 50.92% ) 7,604 page-faults # 0.077 M/sec ( +- 0.00% ) 332,216,085 cycles # 3.361 GHz ( +- 0.14% ) [82.87%] 100,623,710 stalled-cycles-frontend # 30.29% frontend cycles idle ( +- 0.53% ) [82.95%] 58,788,692 stalled-cycles-backend # 17.70% backend cycles idle ( +- 0.59% ) [67.15%] 609,402,433 instructions # 1.83 insns per cycle # 0.17 stalled cycles per insn ( +- 0.04% ) [83.76%] 131,277,138 branches # 1328.067 M/sec ( +- 0.06% ) [83.77%] 1,117,871 branch-misses # 0.85% of all branches ( +- 0.32% ) [83.51%] 0.099580430 seconds time elapsed ( +- 0.48% ) [root@sandy ~]# Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Namhyung Kim <namhyung@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-kracdpw8wqlr0xjh75uk8g11@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-09-12 06:29:17 +08:00
struct perf_sample *sample,
struct machine *machine)
perf sched: Add -C option to measure on a specific CPU To refresh, trying to sched record only one CPU results in bogus latencies as below. I fixed^Wmade it stop doing the bad thing today, by following task migration events properly. Before: marge:/root/tmp # taskset -c 1 perf sched record -C 0 -- sleep 10 marge:/root/tmp # perf sched lat ----------------------------------------------------------------------------------------- Task | Runtime ms | Switches | Average delay ms | Maximum delay ms | ----------------------------------------------------------------------------------------- Xorg:4943 | 1.290 ms | 1 | avg: 1670.132 ms | max: 1670.132 ms | hald-addon-stor:3569 | 0.091 ms | 3 | avg: 658.609 ms | max: 1975.797 ms | hald-addon-stor:3573 | 0.209 ms | 4 | avg: 499.138 ms | max: 1990.565 ms | audispd:4270 | 0.012 ms | 1 | avg: 0.015 ms | max: 0.015 ms | .... marge:/root/tmp # perf sched trace|grep 'Xorg:4943' swapper-0 [000] 401.184013288: sched_stat_runtime: task: Xorg:4943 runtime: 1233188 [ns], vruntime: 19105169779 [ns] rt2870TimerQHan-4947 [000] 402.854140127: sched_stat_wait: task: Xorg:4943 wait: 580073 [ns] rt2870TimerQHan-4947 [000] 402.854141770: sched_migrate_task: task Xorg:4943 [140] from: 1 to: 0 rt2870TimerQHan-4947 [000] 402.854143854: sched_stat_wait: task: Xorg:4943 wait: 0 [ns] rt2870TimerQHan-4947 [000] 402.854145397: sched_switch: task rt2870TimerQHan:4947 [140] (D) ==> Xorg:4943 [140] Xorg-4943 [000] 402.854193133: sched_stat_runtime: task: Xorg:4943 runtime: 56546 [ns], vruntime: 11766332500 [ns] Xorg-4943 [000] 402.854196842: sched_switch: task Xorg:4943 [140] (S) ==> swapper:0 [140] After: marge:/root/tmp # taskset -c 1 perf sched record -C 0 -- sleep 10 marge:/root/tmp # perf sched lat ----------------------------------------------------------------------------------------- Task | Runtime ms | Switches | Average delay ms | Maximum delay ms | ----------------------------------------------------------------------------------------- amarokapp:11150 | 271.297 ms | 878 | avg: 0.130 ms | max: 1.057 ms | konsole:5965 | 1.370 ms | 12 | avg: 0.092 ms | max: 0.855 ms | Xorg:4943 | 179.980 ms | 1109 | avg: 0.087 ms | max: 1.206 ms | hald-addon-stor:3574 | 0.212 ms | 9 | avg: 0.040 ms | max: 0.169 ms | hald-addon-stor:3570 | 0.223 ms | 9 | avg: 0.037 ms | max: 0.223 ms | klauncher:5864 | 0.550 ms | 8 | avg: 0.032 ms | max: 0.048 ms | The 'Maximum delay ms' results are now sane. Signed-off-by: Mike Galbraith <efault@gmx.de> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-10 20:46:04 +08:00
{
perf sched: Don't read all tracepoint variables in advance Do it just at the actual consumer of these fields, that way we avoid needless lookups: [root@sandy ~]# perf sched record sleep 30s [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 8.585 MB perf.data (~375063 samples) ] Before: [root@sandy ~]# perf stat -r 10 perf sched lat > /dev/null Performance counter stats for 'perf sched lat' (10 runs): 103.592215 task-clock # 0.993 CPUs utilized ( +- 0.33% ) 12 context-switches # 0.114 K/sec ( +- 3.29% ) 0 cpu-migrations # 0.000 K/sec 7,605 page-faults # 0.073 M/sec ( +- 0.00% ) 345,796,112 cycles # 3.338 GHz ( +- 0.07% ) [82.90%] 106,876,796 stalled-cycles-frontend # 30.91% frontend cycles idle ( +- 0.38% ) [83.23%] 62,060,877 stalled-cycles-backend # 17.95% backend cycles idle ( +- 0.80% ) [67.14%] 628,246,586 instructions # 1.82 insns per cycle # 0.17 stalled cycles per insn ( +- 0.04% ) [83.64%] 134,962,057 branches # 1302.820 M/sec ( +- 0.10% ) [83.64%] 1,233,037 branch-misses # 0.91% of all branches ( +- 0.29% ) [83.41%] 0.104333272 seconds time elapsed ( +- 0.33% ) [root@sandy ~]# perf stat -r 10 perf sched lat > /dev/null Performance counter stats for 'perf sched lat' (10 runs): 98.848272 task-clock # 0.993 CPUs utilized ( +- 0.48% ) 11 context-switches # 0.112 K/sec ( +- 2.83% ) 0 cpu-migrations # 0.003 K/sec ( +- 50.92% ) 7,604 page-faults # 0.077 M/sec ( +- 0.00% ) 332,216,085 cycles # 3.361 GHz ( +- 0.14% ) [82.87%] 100,623,710 stalled-cycles-frontend # 30.29% frontend cycles idle ( +- 0.53% ) [82.95%] 58,788,692 stalled-cycles-backend # 17.70% backend cycles idle ( +- 0.59% ) [67.15%] 609,402,433 instructions # 1.83 insns per cycle # 0.17 stalled cycles per insn ( +- 0.04% ) [83.76%] 131,277,138 branches # 1328.067 M/sec ( +- 0.06% ) [83.77%] 1,117,871 branch-misses # 0.85% of all branches ( +- 0.32% ) [83.51%] 0.099580430 seconds time elapsed ( +- 0.48% ) [root@sandy ~]# Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Namhyung Kim <namhyung@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-kracdpw8wqlr0xjh75uk8g11@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-09-12 06:29:17 +08:00
const u32 pid = perf_evsel__intval(evsel, sample, "pid");
u64 timestamp = sample->time;
perf sched: Add -C option to measure on a specific CPU To refresh, trying to sched record only one CPU results in bogus latencies as below. I fixed^Wmade it stop doing the bad thing today, by following task migration events properly. Before: marge:/root/tmp # taskset -c 1 perf sched record -C 0 -- sleep 10 marge:/root/tmp # perf sched lat ----------------------------------------------------------------------------------------- Task | Runtime ms | Switches | Average delay ms | Maximum delay ms | ----------------------------------------------------------------------------------------- Xorg:4943 | 1.290 ms | 1 | avg: 1670.132 ms | max: 1670.132 ms | hald-addon-stor:3569 | 0.091 ms | 3 | avg: 658.609 ms | max: 1975.797 ms | hald-addon-stor:3573 | 0.209 ms | 4 | avg: 499.138 ms | max: 1990.565 ms | audispd:4270 | 0.012 ms | 1 | avg: 0.015 ms | max: 0.015 ms | .... marge:/root/tmp # perf sched trace|grep 'Xorg:4943' swapper-0 [000] 401.184013288: sched_stat_runtime: task: Xorg:4943 runtime: 1233188 [ns], vruntime: 19105169779 [ns] rt2870TimerQHan-4947 [000] 402.854140127: sched_stat_wait: task: Xorg:4943 wait: 580073 [ns] rt2870TimerQHan-4947 [000] 402.854141770: sched_migrate_task: task Xorg:4943 [140] from: 1 to: 0 rt2870TimerQHan-4947 [000] 402.854143854: sched_stat_wait: task: Xorg:4943 wait: 0 [ns] rt2870TimerQHan-4947 [000] 402.854145397: sched_switch: task rt2870TimerQHan:4947 [140] (D) ==> Xorg:4943 [140] Xorg-4943 [000] 402.854193133: sched_stat_runtime: task: Xorg:4943 runtime: 56546 [ns], vruntime: 11766332500 [ns] Xorg-4943 [000] 402.854196842: sched_switch: task Xorg:4943 [140] (S) ==> swapper:0 [140] After: marge:/root/tmp # taskset -c 1 perf sched record -C 0 -- sleep 10 marge:/root/tmp # perf sched lat ----------------------------------------------------------------------------------------- Task | Runtime ms | Switches | Average delay ms | Maximum delay ms | ----------------------------------------------------------------------------------------- amarokapp:11150 | 271.297 ms | 878 | avg: 0.130 ms | max: 1.057 ms | konsole:5965 | 1.370 ms | 12 | avg: 0.092 ms | max: 0.855 ms | Xorg:4943 | 179.980 ms | 1109 | avg: 0.087 ms | max: 1.206 ms | hald-addon-stor:3574 | 0.212 ms | 9 | avg: 0.040 ms | max: 0.169 ms | hald-addon-stor:3570 | 0.223 ms | 9 | avg: 0.037 ms | max: 0.223 ms | klauncher:5864 | 0.550 ms | 8 | avg: 0.032 ms | max: 0.048 ms | The 'Maximum delay ms' results are now sane. Signed-off-by: Mike Galbraith <efault@gmx.de> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-10 20:46:04 +08:00
struct work_atoms *atoms;
struct work_atom *atom;
struct thread *migrant;
perf machine: Protect the machine->threads with a rwlock In addition to using refcounts for the struct thread lifetime management, we need to protect access to machine->threads from concurrent access. That happens in 'perf top', where a thread processes events, inserting and deleting entries from that rb_tree while another thread decays hist_entries, that end up dropping references and ultimately deleting threads from the rb_tree and releasing its resources when no further hist_entry (or other data structures, like in 'perf sched') references it. So the rule is the same for refcounts + protected trees in the kernel, get the tree lock, find object, bump the refcount, drop the tree lock, return, use object, drop the refcount if no more use of it is needed, keep it if storing it in some other data structure, drop when releasing that data structure. I.e. pair "t = machine__find(new)_thread()" with a "thread__put(t)", and "perf_event__preprocess_sample(&al)" with "addr_location__put(&al)". The addr_location__put() one is because as we return references to several data structures, we may end up adding more reference counting for the other data structures and then we'll drop it at addr_location__put() time. Acked-by: David Ahern <dsahern@gmail.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Borislav Petkov <bp@suse.de> Cc: Don Zickus <dzickus@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-bs9rt4n0jw3hi9f3zxyy3xln@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-04-07 07:43:22 +08:00
int err = -1;
perf sched: Add -C option to measure on a specific CPU To refresh, trying to sched record only one CPU results in bogus latencies as below. I fixed^Wmade it stop doing the bad thing today, by following task migration events properly. Before: marge:/root/tmp # taskset -c 1 perf sched record -C 0 -- sleep 10 marge:/root/tmp # perf sched lat ----------------------------------------------------------------------------------------- Task | Runtime ms | Switches | Average delay ms | Maximum delay ms | ----------------------------------------------------------------------------------------- Xorg:4943 | 1.290 ms | 1 | avg: 1670.132 ms | max: 1670.132 ms | hald-addon-stor:3569 | 0.091 ms | 3 | avg: 658.609 ms | max: 1975.797 ms | hald-addon-stor:3573 | 0.209 ms | 4 | avg: 499.138 ms | max: 1990.565 ms | audispd:4270 | 0.012 ms | 1 | avg: 0.015 ms | max: 0.015 ms | .... marge:/root/tmp # perf sched trace|grep 'Xorg:4943' swapper-0 [000] 401.184013288: sched_stat_runtime: task: Xorg:4943 runtime: 1233188 [ns], vruntime: 19105169779 [ns] rt2870TimerQHan-4947 [000] 402.854140127: sched_stat_wait: task: Xorg:4943 wait: 580073 [ns] rt2870TimerQHan-4947 [000] 402.854141770: sched_migrate_task: task Xorg:4943 [140] from: 1 to: 0 rt2870TimerQHan-4947 [000] 402.854143854: sched_stat_wait: task: Xorg:4943 wait: 0 [ns] rt2870TimerQHan-4947 [000] 402.854145397: sched_switch: task rt2870TimerQHan:4947 [140] (D) ==> Xorg:4943 [140] Xorg-4943 [000] 402.854193133: sched_stat_runtime: task: Xorg:4943 runtime: 56546 [ns], vruntime: 11766332500 [ns] Xorg-4943 [000] 402.854196842: sched_switch: task Xorg:4943 [140] (S) ==> swapper:0 [140] After: marge:/root/tmp # taskset -c 1 perf sched record -C 0 -- sleep 10 marge:/root/tmp # perf sched lat ----------------------------------------------------------------------------------------- Task | Runtime ms | Switches | Average delay ms | Maximum delay ms | ----------------------------------------------------------------------------------------- amarokapp:11150 | 271.297 ms | 878 | avg: 0.130 ms | max: 1.057 ms | konsole:5965 | 1.370 ms | 12 | avg: 0.092 ms | max: 0.855 ms | Xorg:4943 | 179.980 ms | 1109 | avg: 0.087 ms | max: 1.206 ms | hald-addon-stor:3574 | 0.212 ms | 9 | avg: 0.040 ms | max: 0.169 ms | hald-addon-stor:3570 | 0.223 ms | 9 | avg: 0.037 ms | max: 0.223 ms | klauncher:5864 | 0.550 ms | 8 | avg: 0.032 ms | max: 0.048 ms | The 'Maximum delay ms' results are now sane. Signed-off-by: Mike Galbraith <efault@gmx.de> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-10 20:46:04 +08:00
/*
* Only need to worry about migration when profiling one CPU.
*/
if (sched->profile_cpu == -1)
return 0;
perf sched: Add -C option to measure on a specific CPU To refresh, trying to sched record only one CPU results in bogus latencies as below. I fixed^Wmade it stop doing the bad thing today, by following task migration events properly. Before: marge:/root/tmp # taskset -c 1 perf sched record -C 0 -- sleep 10 marge:/root/tmp # perf sched lat ----------------------------------------------------------------------------------------- Task | Runtime ms | Switches | Average delay ms | Maximum delay ms | ----------------------------------------------------------------------------------------- Xorg:4943 | 1.290 ms | 1 | avg: 1670.132 ms | max: 1670.132 ms | hald-addon-stor:3569 | 0.091 ms | 3 | avg: 658.609 ms | max: 1975.797 ms | hald-addon-stor:3573 | 0.209 ms | 4 | avg: 499.138 ms | max: 1990.565 ms | audispd:4270 | 0.012 ms | 1 | avg: 0.015 ms | max: 0.015 ms | .... marge:/root/tmp # perf sched trace|grep 'Xorg:4943' swapper-0 [000] 401.184013288: sched_stat_runtime: task: Xorg:4943 runtime: 1233188 [ns], vruntime: 19105169779 [ns] rt2870TimerQHan-4947 [000] 402.854140127: sched_stat_wait: task: Xorg:4943 wait: 580073 [ns] rt2870TimerQHan-4947 [000] 402.854141770: sched_migrate_task: task Xorg:4943 [140] from: 1 to: 0 rt2870TimerQHan-4947 [000] 402.854143854: sched_stat_wait: task: Xorg:4943 wait: 0 [ns] rt2870TimerQHan-4947 [000] 402.854145397: sched_switch: task rt2870TimerQHan:4947 [140] (D) ==> Xorg:4943 [140] Xorg-4943 [000] 402.854193133: sched_stat_runtime: task: Xorg:4943 runtime: 56546 [ns], vruntime: 11766332500 [ns] Xorg-4943 [000] 402.854196842: sched_switch: task Xorg:4943 [140] (S) ==> swapper:0 [140] After: marge:/root/tmp # taskset -c 1 perf sched record -C 0 -- sleep 10 marge:/root/tmp # perf sched lat ----------------------------------------------------------------------------------------- Task | Runtime ms | Switches | Average delay ms | Maximum delay ms | ----------------------------------------------------------------------------------------- amarokapp:11150 | 271.297 ms | 878 | avg: 0.130 ms | max: 1.057 ms | konsole:5965 | 1.370 ms | 12 | avg: 0.092 ms | max: 0.855 ms | Xorg:4943 | 179.980 ms | 1109 | avg: 0.087 ms | max: 1.206 ms | hald-addon-stor:3574 | 0.212 ms | 9 | avg: 0.040 ms | max: 0.169 ms | hald-addon-stor:3570 | 0.223 ms | 9 | avg: 0.037 ms | max: 0.223 ms | klauncher:5864 | 0.550 ms | 8 | avg: 0.032 ms | max: 0.048 ms | The 'Maximum delay ms' results are now sane. Signed-off-by: Mike Galbraith <efault@gmx.de> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-10 20:46:04 +08:00
migrant = machine__findnew_thread(machine, -1, pid);
perf machine: Protect the machine->threads with a rwlock In addition to using refcounts for the struct thread lifetime management, we need to protect access to machine->threads from concurrent access. That happens in 'perf top', where a thread processes events, inserting and deleting entries from that rb_tree while another thread decays hist_entries, that end up dropping references and ultimately deleting threads from the rb_tree and releasing its resources when no further hist_entry (or other data structures, like in 'perf sched') references it. So the rule is the same for refcounts + protected trees in the kernel, get the tree lock, find object, bump the refcount, drop the tree lock, return, use object, drop the refcount if no more use of it is needed, keep it if storing it in some other data structure, drop when releasing that data structure. I.e. pair "t = machine__find(new)_thread()" with a "thread__put(t)", and "perf_event__preprocess_sample(&al)" with "addr_location__put(&al)". The addr_location__put() one is because as we return references to several data structures, we may end up adding more reference counting for the other data structures and then we'll drop it at addr_location__put() time. Acked-by: David Ahern <dsahern@gmail.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Borislav Petkov <bp@suse.de> Cc: Don Zickus <dzickus@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-bs9rt4n0jw3hi9f3zxyy3xln@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-04-07 07:43:22 +08:00
if (migrant == NULL)
return -1;
atoms = thread_atoms_search(&sched->atom_root, migrant, &sched->cmp_pid);
perf sched: Add -C option to measure on a specific CPU To refresh, trying to sched record only one CPU results in bogus latencies as below. I fixed^Wmade it stop doing the bad thing today, by following task migration events properly. Before: marge:/root/tmp # taskset -c 1 perf sched record -C 0 -- sleep 10 marge:/root/tmp # perf sched lat ----------------------------------------------------------------------------------------- Task | Runtime ms | Switches | Average delay ms | Maximum delay ms | ----------------------------------------------------------------------------------------- Xorg:4943 | 1.290 ms | 1 | avg: 1670.132 ms | max: 1670.132 ms | hald-addon-stor:3569 | 0.091 ms | 3 | avg: 658.609 ms | max: 1975.797 ms | hald-addon-stor:3573 | 0.209 ms | 4 | avg: 499.138 ms | max: 1990.565 ms | audispd:4270 | 0.012 ms | 1 | avg: 0.015 ms | max: 0.015 ms | .... marge:/root/tmp # perf sched trace|grep 'Xorg:4943' swapper-0 [000] 401.184013288: sched_stat_runtime: task: Xorg:4943 runtime: 1233188 [ns], vruntime: 19105169779 [ns] rt2870TimerQHan-4947 [000] 402.854140127: sched_stat_wait: task: Xorg:4943 wait: 580073 [ns] rt2870TimerQHan-4947 [000] 402.854141770: sched_migrate_task: task Xorg:4943 [140] from: 1 to: 0 rt2870TimerQHan-4947 [000] 402.854143854: sched_stat_wait: task: Xorg:4943 wait: 0 [ns] rt2870TimerQHan-4947 [000] 402.854145397: sched_switch: task rt2870TimerQHan:4947 [140] (D) ==> Xorg:4943 [140] Xorg-4943 [000] 402.854193133: sched_stat_runtime: task: Xorg:4943 runtime: 56546 [ns], vruntime: 11766332500 [ns] Xorg-4943 [000] 402.854196842: sched_switch: task Xorg:4943 [140] (S) ==> swapper:0 [140] After: marge:/root/tmp # taskset -c 1 perf sched record -C 0 -- sleep 10 marge:/root/tmp # perf sched lat ----------------------------------------------------------------------------------------- Task | Runtime ms | Switches | Average delay ms | Maximum delay ms | ----------------------------------------------------------------------------------------- amarokapp:11150 | 271.297 ms | 878 | avg: 0.130 ms | max: 1.057 ms | konsole:5965 | 1.370 ms | 12 | avg: 0.092 ms | max: 0.855 ms | Xorg:4943 | 179.980 ms | 1109 | avg: 0.087 ms | max: 1.206 ms | hald-addon-stor:3574 | 0.212 ms | 9 | avg: 0.040 ms | max: 0.169 ms | hald-addon-stor:3570 | 0.223 ms | 9 | avg: 0.037 ms | max: 0.223 ms | klauncher:5864 | 0.550 ms | 8 | avg: 0.032 ms | max: 0.048 ms | The 'Maximum delay ms' results are now sane. Signed-off-by: Mike Galbraith <efault@gmx.de> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-10 20:46:04 +08:00
if (!atoms) {
if (thread_atoms_insert(sched, migrant))
perf machine: Protect the machine->threads with a rwlock In addition to using refcounts for the struct thread lifetime management, we need to protect access to machine->threads from concurrent access. That happens in 'perf top', where a thread processes events, inserting and deleting entries from that rb_tree while another thread decays hist_entries, that end up dropping references and ultimately deleting threads from the rb_tree and releasing its resources when no further hist_entry (or other data structures, like in 'perf sched') references it. So the rule is the same for refcounts + protected trees in the kernel, get the tree lock, find object, bump the refcount, drop the tree lock, return, use object, drop the refcount if no more use of it is needed, keep it if storing it in some other data structure, drop when releasing that data structure. I.e. pair "t = machine__find(new)_thread()" with a "thread__put(t)", and "perf_event__preprocess_sample(&al)" with "addr_location__put(&al)". The addr_location__put() one is because as we return references to several data structures, we may end up adding more reference counting for the other data structures and then we'll drop it at addr_location__put() time. Acked-by: David Ahern <dsahern@gmail.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Borislav Petkov <bp@suse.de> Cc: Don Zickus <dzickus@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-bs9rt4n0jw3hi9f3zxyy3xln@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-04-07 07:43:22 +08:00
goto out_put;
register_pid(sched, migrant->tid, thread__comm_str(migrant));
atoms = thread_atoms_search(&sched->atom_root, migrant, &sched->cmp_pid);
if (!atoms) {
pr_err("migration-event: Internal tree error");
perf machine: Protect the machine->threads with a rwlock In addition to using refcounts for the struct thread lifetime management, we need to protect access to machine->threads from concurrent access. That happens in 'perf top', where a thread processes events, inserting and deleting entries from that rb_tree while another thread decays hist_entries, that end up dropping references and ultimately deleting threads from the rb_tree and releasing its resources when no further hist_entry (or other data structures, like in 'perf sched') references it. So the rule is the same for refcounts + protected trees in the kernel, get the tree lock, find object, bump the refcount, drop the tree lock, return, use object, drop the refcount if no more use of it is needed, keep it if storing it in some other data structure, drop when releasing that data structure. I.e. pair "t = machine__find(new)_thread()" with a "thread__put(t)", and "perf_event__preprocess_sample(&al)" with "addr_location__put(&al)". The addr_location__put() one is because as we return references to several data structures, we may end up adding more reference counting for the other data structures and then we'll drop it at addr_location__put() time. Acked-by: David Ahern <dsahern@gmail.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Borislav Petkov <bp@suse.de> Cc: Don Zickus <dzickus@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-bs9rt4n0jw3hi9f3zxyy3xln@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-04-07 07:43:22 +08:00
goto out_put;
}
if (add_sched_out_event(atoms, 'R', timestamp))
perf machine: Protect the machine->threads with a rwlock In addition to using refcounts for the struct thread lifetime management, we need to protect access to machine->threads from concurrent access. That happens in 'perf top', where a thread processes events, inserting and deleting entries from that rb_tree while another thread decays hist_entries, that end up dropping references and ultimately deleting threads from the rb_tree and releasing its resources when no further hist_entry (or other data structures, like in 'perf sched') references it. So the rule is the same for refcounts + protected trees in the kernel, get the tree lock, find object, bump the refcount, drop the tree lock, return, use object, drop the refcount if no more use of it is needed, keep it if storing it in some other data structure, drop when releasing that data structure. I.e. pair "t = machine__find(new)_thread()" with a "thread__put(t)", and "perf_event__preprocess_sample(&al)" with "addr_location__put(&al)". The addr_location__put() one is because as we return references to several data structures, we may end up adding more reference counting for the other data structures and then we'll drop it at addr_location__put() time. Acked-by: David Ahern <dsahern@gmail.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Borislav Petkov <bp@suse.de> Cc: Don Zickus <dzickus@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-bs9rt4n0jw3hi9f3zxyy3xln@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-04-07 07:43:22 +08:00
goto out_put;
perf sched: Add -C option to measure on a specific CPU To refresh, trying to sched record only one CPU results in bogus latencies as below. I fixed^Wmade it stop doing the bad thing today, by following task migration events properly. Before: marge:/root/tmp # taskset -c 1 perf sched record -C 0 -- sleep 10 marge:/root/tmp # perf sched lat ----------------------------------------------------------------------------------------- Task | Runtime ms | Switches | Average delay ms | Maximum delay ms | ----------------------------------------------------------------------------------------- Xorg:4943 | 1.290 ms | 1 | avg: 1670.132 ms | max: 1670.132 ms | hald-addon-stor:3569 | 0.091 ms | 3 | avg: 658.609 ms | max: 1975.797 ms | hald-addon-stor:3573 | 0.209 ms | 4 | avg: 499.138 ms | max: 1990.565 ms | audispd:4270 | 0.012 ms | 1 | avg: 0.015 ms | max: 0.015 ms | .... marge:/root/tmp # perf sched trace|grep 'Xorg:4943' swapper-0 [000] 401.184013288: sched_stat_runtime: task: Xorg:4943 runtime: 1233188 [ns], vruntime: 19105169779 [ns] rt2870TimerQHan-4947 [000] 402.854140127: sched_stat_wait: task: Xorg:4943 wait: 580073 [ns] rt2870TimerQHan-4947 [000] 402.854141770: sched_migrate_task: task Xorg:4943 [140] from: 1 to: 0 rt2870TimerQHan-4947 [000] 402.854143854: sched_stat_wait: task: Xorg:4943 wait: 0 [ns] rt2870TimerQHan-4947 [000] 402.854145397: sched_switch: task rt2870TimerQHan:4947 [140] (D) ==> Xorg:4943 [140] Xorg-4943 [000] 402.854193133: sched_stat_runtime: task: Xorg:4943 runtime: 56546 [ns], vruntime: 11766332500 [ns] Xorg-4943 [000] 402.854196842: sched_switch: task Xorg:4943 [140] (S) ==> swapper:0 [140] After: marge:/root/tmp # taskset -c 1 perf sched record -C 0 -- sleep 10 marge:/root/tmp # perf sched lat ----------------------------------------------------------------------------------------- Task | Runtime ms | Switches | Average delay ms | Maximum delay ms | ----------------------------------------------------------------------------------------- amarokapp:11150 | 271.297 ms | 878 | avg: 0.130 ms | max: 1.057 ms | konsole:5965 | 1.370 ms | 12 | avg: 0.092 ms | max: 0.855 ms | Xorg:4943 | 179.980 ms | 1109 | avg: 0.087 ms | max: 1.206 ms | hald-addon-stor:3574 | 0.212 ms | 9 | avg: 0.040 ms | max: 0.169 ms | hald-addon-stor:3570 | 0.223 ms | 9 | avg: 0.037 ms | max: 0.223 ms | klauncher:5864 | 0.550 ms | 8 | avg: 0.032 ms | max: 0.048 ms | The 'Maximum delay ms' results are now sane. Signed-off-by: Mike Galbraith <efault@gmx.de> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-10 20:46:04 +08:00
}
BUG_ON(list_empty(&atoms->work_list));
atom = list_entry(atoms->work_list.prev, struct work_atom, list);
atom->sched_in_time = atom->sched_out_time = atom->wake_up_time = timestamp;
sched->nr_timestamps++;
perf sched: Add -C option to measure on a specific CPU To refresh, trying to sched record only one CPU results in bogus latencies as below. I fixed^Wmade it stop doing the bad thing today, by following task migration events properly. Before: marge:/root/tmp # taskset -c 1 perf sched record -C 0 -- sleep 10 marge:/root/tmp # perf sched lat ----------------------------------------------------------------------------------------- Task | Runtime ms | Switches | Average delay ms | Maximum delay ms | ----------------------------------------------------------------------------------------- Xorg:4943 | 1.290 ms | 1 | avg: 1670.132 ms | max: 1670.132 ms | hald-addon-stor:3569 | 0.091 ms | 3 | avg: 658.609 ms | max: 1975.797 ms | hald-addon-stor:3573 | 0.209 ms | 4 | avg: 499.138 ms | max: 1990.565 ms | audispd:4270 | 0.012 ms | 1 | avg: 0.015 ms | max: 0.015 ms | .... marge:/root/tmp # perf sched trace|grep 'Xorg:4943' swapper-0 [000] 401.184013288: sched_stat_runtime: task: Xorg:4943 runtime: 1233188 [ns], vruntime: 19105169779 [ns] rt2870TimerQHan-4947 [000] 402.854140127: sched_stat_wait: task: Xorg:4943 wait: 580073 [ns] rt2870TimerQHan-4947 [000] 402.854141770: sched_migrate_task: task Xorg:4943 [140] from: 1 to: 0 rt2870TimerQHan-4947 [000] 402.854143854: sched_stat_wait: task: Xorg:4943 wait: 0 [ns] rt2870TimerQHan-4947 [000] 402.854145397: sched_switch: task rt2870TimerQHan:4947 [140] (D) ==> Xorg:4943 [140] Xorg-4943 [000] 402.854193133: sched_stat_runtime: task: Xorg:4943 runtime: 56546 [ns], vruntime: 11766332500 [ns] Xorg-4943 [000] 402.854196842: sched_switch: task Xorg:4943 [140] (S) ==> swapper:0 [140] After: marge:/root/tmp # taskset -c 1 perf sched record -C 0 -- sleep 10 marge:/root/tmp # perf sched lat ----------------------------------------------------------------------------------------- Task | Runtime ms | Switches | Average delay ms | Maximum delay ms | ----------------------------------------------------------------------------------------- amarokapp:11150 | 271.297 ms | 878 | avg: 0.130 ms | max: 1.057 ms | konsole:5965 | 1.370 ms | 12 | avg: 0.092 ms | max: 0.855 ms | Xorg:4943 | 179.980 ms | 1109 | avg: 0.087 ms | max: 1.206 ms | hald-addon-stor:3574 | 0.212 ms | 9 | avg: 0.040 ms | max: 0.169 ms | hald-addon-stor:3570 | 0.223 ms | 9 | avg: 0.037 ms | max: 0.223 ms | klauncher:5864 | 0.550 ms | 8 | avg: 0.032 ms | max: 0.048 ms | The 'Maximum delay ms' results are now sane. Signed-off-by: Mike Galbraith <efault@gmx.de> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-10 20:46:04 +08:00
if (atom->sched_out_time > timestamp)
sched->nr_unordered_timestamps++;
perf machine: Protect the machine->threads with a rwlock In addition to using refcounts for the struct thread lifetime management, we need to protect access to machine->threads from concurrent access. That happens in 'perf top', where a thread processes events, inserting and deleting entries from that rb_tree while another thread decays hist_entries, that end up dropping references and ultimately deleting threads from the rb_tree and releasing its resources when no further hist_entry (or other data structures, like in 'perf sched') references it. So the rule is the same for refcounts + protected trees in the kernel, get the tree lock, find object, bump the refcount, drop the tree lock, return, use object, drop the refcount if no more use of it is needed, keep it if storing it in some other data structure, drop when releasing that data structure. I.e. pair "t = machine__find(new)_thread()" with a "thread__put(t)", and "perf_event__preprocess_sample(&al)" with "addr_location__put(&al)". The addr_location__put() one is because as we return references to several data structures, we may end up adding more reference counting for the other data structures and then we'll drop it at addr_location__put() time. Acked-by: David Ahern <dsahern@gmail.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Borislav Petkov <bp@suse.de> Cc: Don Zickus <dzickus@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-bs9rt4n0jw3hi9f3zxyy3xln@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-04-07 07:43:22 +08:00
err = 0;
out_put:
thread__put(migrant);
return err;
perf sched: Add -C option to measure on a specific CPU To refresh, trying to sched record only one CPU results in bogus latencies as below. I fixed^Wmade it stop doing the bad thing today, by following task migration events properly. Before: marge:/root/tmp # taskset -c 1 perf sched record -C 0 -- sleep 10 marge:/root/tmp # perf sched lat ----------------------------------------------------------------------------------------- Task | Runtime ms | Switches | Average delay ms | Maximum delay ms | ----------------------------------------------------------------------------------------- Xorg:4943 | 1.290 ms | 1 | avg: 1670.132 ms | max: 1670.132 ms | hald-addon-stor:3569 | 0.091 ms | 3 | avg: 658.609 ms | max: 1975.797 ms | hald-addon-stor:3573 | 0.209 ms | 4 | avg: 499.138 ms | max: 1990.565 ms | audispd:4270 | 0.012 ms | 1 | avg: 0.015 ms | max: 0.015 ms | .... marge:/root/tmp # perf sched trace|grep 'Xorg:4943' swapper-0 [000] 401.184013288: sched_stat_runtime: task: Xorg:4943 runtime: 1233188 [ns], vruntime: 19105169779 [ns] rt2870TimerQHan-4947 [000] 402.854140127: sched_stat_wait: task: Xorg:4943 wait: 580073 [ns] rt2870TimerQHan-4947 [000] 402.854141770: sched_migrate_task: task Xorg:4943 [140] from: 1 to: 0 rt2870TimerQHan-4947 [000] 402.854143854: sched_stat_wait: task: Xorg:4943 wait: 0 [ns] rt2870TimerQHan-4947 [000] 402.854145397: sched_switch: task rt2870TimerQHan:4947 [140] (D) ==> Xorg:4943 [140] Xorg-4943 [000] 402.854193133: sched_stat_runtime: task: Xorg:4943 runtime: 56546 [ns], vruntime: 11766332500 [ns] Xorg-4943 [000] 402.854196842: sched_switch: task Xorg:4943 [140] (S) ==> swapper:0 [140] After: marge:/root/tmp # taskset -c 1 perf sched record -C 0 -- sleep 10 marge:/root/tmp # perf sched lat ----------------------------------------------------------------------------------------- Task | Runtime ms | Switches | Average delay ms | Maximum delay ms | ----------------------------------------------------------------------------------------- amarokapp:11150 | 271.297 ms | 878 | avg: 0.130 ms | max: 1.057 ms | konsole:5965 | 1.370 ms | 12 | avg: 0.092 ms | max: 0.855 ms | Xorg:4943 | 179.980 ms | 1109 | avg: 0.087 ms | max: 1.206 ms | hald-addon-stor:3574 | 0.212 ms | 9 | avg: 0.040 ms | max: 0.169 ms | hald-addon-stor:3570 | 0.223 ms | 9 | avg: 0.037 ms | max: 0.223 ms | klauncher:5864 | 0.550 ms | 8 | avg: 0.032 ms | max: 0.048 ms | The 'Maximum delay ms' results are now sane. Signed-off-by: Mike Galbraith <efault@gmx.de> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-10 20:46:04 +08:00
}
static void output_lat_thread(struct perf_sched *sched, struct work_atoms *work_list)
{
int i;
int ret;
u64 avg;
char max_lat_at[32];
perf sched: Add support for sched:sched_stat_runtime events This allows more precise 'perf sched latency' output: --------------------------------------------------------------------------------------- Task | Runtime ms | Switches | Average delay ms | Maximum delay ms | --------------------------------------------------------------------------------------- ksoftirqd/0-4 | 0.010 ms | 2 | avg: 2.476 ms | max: 2.977 ms | perf-12328 | 15.844 ms | 66 | avg: 1.118 ms | max: 9.979 ms | bdi-default-235 | 0.009 ms | 1 | avg: 0.998 ms | max: 0.998 ms | events/1-8 | 0.020 ms | 2 | avg: 0.998 ms | max: 0.998 ms | events/0-7 | 0.018 ms | 2 | avg: 0.992 ms | max: 0.996 ms | sleep-12329 | 0.742 ms | 3 | avg: 0.906 ms | max: 2.289 ms | sshd-12122 | 0.163 ms | 2 | avg: 0.283 ms | max: 0.562 ms | loop-getpid-lon-12322 | 1023.636 ms | 69 | avg: 0.208 ms | max: 5.996 ms | loop-getpid-lon-12321 | 1038.638 ms | 5 | avg: 0.073 ms | max: 0.171 ms | migration/1-5 | 0.000 ms | 1 | avg: 0.006 ms | max: 0.006 ms | --------------------------------------------------------------------------------------- TOTAL: | 2079.078 ms | 153 | ------------------------------------------------- Also, streamline the code a bit more, add asserts for various state machine failures (they should be debugged if they occur) and fix a few odd ends. Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-15 02:04:48 +08:00
if (!work_list->nb_atoms)
return;
perf tools: Implement counter output multiplexing Finish the -M/--multiplex option implementation: - separate it out from group_fd - correctly set it via the ioctl and dont mmap counters that are multiplexed - modify the perf record event loop to deal with buffer-less counters. - remove the -g option from perf sched record - account for unordered events in perf sched latency - (add -f to perf sched record to ease measurements) - skip idle threads (pid==0) in latency output The result is better latency output by 'perf sched latency': ----------------------------------------------------------------------------------- Task | Runtime ms | Switches | Average delay ms | Maximum delay ms | ----------------------------------------------------------------------------------- ksoftirqd/8 | 0.071 ms | 2 | avg: 0.458 ms | max: 0.913 ms | at-spi-registry | 0.609 ms | 19 | avg: 0.013 ms | max: 0.023 ms | perf | 3.316 ms | 16 | avg: 0.013 ms | max: 0.054 ms | Xorg | 0.392 ms | 19 | avg: 0.011 ms | max: 0.018 ms | sleep | 0.537 ms | 2 | avg: 0.009 ms | max: 0.009 ms | ----------------------------------------------------------------------------------- TOTAL: | 4.925 ms | 58 | --------------------------------------------- Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-14 00:15:54 +08:00
/*
* Ignore idle threads:
*/
if (!strcmp(thread__comm_str(work_list->thread), "swapper"))
perf tools: Implement counter output multiplexing Finish the -M/--multiplex option implementation: - separate it out from group_fd - correctly set it via the ioctl and dont mmap counters that are multiplexed - modify the perf record event loop to deal with buffer-less counters. - remove the -g option from perf sched record - account for unordered events in perf sched latency - (add -f to perf sched record to ease measurements) - skip idle threads (pid==0) in latency output The result is better latency output by 'perf sched latency': ----------------------------------------------------------------------------------- Task | Runtime ms | Switches | Average delay ms | Maximum delay ms | ----------------------------------------------------------------------------------- ksoftirqd/8 | 0.071 ms | 2 | avg: 0.458 ms | max: 0.913 ms | at-spi-registry | 0.609 ms | 19 | avg: 0.013 ms | max: 0.023 ms | perf | 3.316 ms | 16 | avg: 0.013 ms | max: 0.054 ms | Xorg | 0.392 ms | 19 | avg: 0.011 ms | max: 0.018 ms | sleep | 0.537 ms | 2 | avg: 0.009 ms | max: 0.009 ms | ----------------------------------------------------------------------------------- TOTAL: | 4.925 ms | 58 | --------------------------------------------- Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-14 00:15:54 +08:00
return;
sched->all_runtime += work_list->total_runtime;
sched->all_count += work_list->nb_atoms;
perf sched: Add option to merge like comms to lat output Sometimes when debugging large multi-threaded applications it is helpful to collate all of the latency numbers into one bulk record to get an idea of what is going on. This patch does this by merging any entries that belong to the same comm into one entry and then spits out those totals. I've also slightly changed the output so you can see how many threads were merged in the processing. Here is the new default output format ----------------------------------------------------------------------------------------------------------- Task | Runtime ms | Switches | Average delay ms | Maximum delay ms | Maximum delay at | ----------------------------------------------------------------------------------------------------------- chrome:(23) | 740.878 ms | 2612 | avg: 0.022 ms | max: 0.845 ms | max at: 7935.254223 s pulseaudio:1523 | 94.440 ms | 597 | avg: 0.027 ms | max: 0.110 ms | max at: 7934.668372 s threaded-ml:6042 | 72.554 ms | 386 | avg: 0.035 ms | max: 1.186 ms | max at: 7935.330911 s Chrome_IOThread:3832 | 52.388 ms | 456 | avg: 0.021 ms | max: 1.365 ms | max at: 7935.330602 s Chrome_ChildIOT:(7) | 50.694 ms | 743 | avg: 0.021 ms | max: 1.448 ms | max at: 7935.256659 s Compositor:5510 | 30.012 ms | 192 | avg: 0.019 ms | max: 0.131 ms | max at: 7936.636815 s plugin_audio_th:6043 | 24.828 ms | 314 | avg: 0.018 ms | max: 0.143 ms | max at: 7936.205994 s CompositorTileW:(2) | 14.099 ms | 45 | avg: 0.022 ms | max: 0.153 ms | max at: 7937.521800 s the (#) after the task is the number of tasks merged, and then if there were no tasks merged it just shows the pid. Here is the same trace file with the -p option to print the per-pid latency numbers ----------------------------------------------------------------------------------------------------------- Task | Runtime ms | Switches | Average delay ms | Maximum delay ms | Maximum delay at | ----------------------------------------------------------------------------------------------------------- chrome:5500 | 386.872 ms | 387 | avg: 0.023 ms | max: 0.241 ms | max at: 7936.001694 s pulseaudio:1523 | 94.440 ms | 597 | avg: 0.027 ms | max: 0.110 ms | max at: 7934.668372 s threaded-ml:6042 | 72.554 ms | 386 | avg: 0.035 ms | max: 1.186 ms | max at: 7935.330911 s chrome:10226 | 69.710 ms | 251 | avg: 0.023 ms | max: 0.764 ms | max at: 7935.992305 s chrome:4267 | 64.551 ms | 418 | avg: 0.021 ms | max: 0.294 ms | max at: 7937.862427 s chrome:4827 | 62.268 ms | 54 | avg: 0.029 ms | max: 0.666 ms | max at: 7935.992813 s Chrome_IOThread:3832 | 52.388 ms | 456 | avg: 0.021 ms | max: 1.365 ms | max at: 7935.330602 s chrome:3776 | 46.150 ms | 349 | avg: 0.023 ms | max: 0.845 ms | max at: 7935.254223 s Signed-off-by: Josef Bacik <jbacik@fb.com> Acked-by: Ingo Molnar <mingo@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: kernel-team@fb.com Link: http://lkml.kernel.org/r/1432300720-30478-1-git-send-email-jbacik@fb.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-05-22 21:18:40 +08:00
if (work_list->num_merged > 1)
ret = printf(" %s:(%d) ", thread__comm_str(work_list->thread), work_list->num_merged);
else
ret = printf(" %s:%d ", thread__comm_str(work_list->thread), work_list->thread->tid);
for (i = 0; i < 24 - ret; i++)
printf(" ");
perf sched: Add support for sched:sched_stat_runtime events This allows more precise 'perf sched latency' output: --------------------------------------------------------------------------------------- Task | Runtime ms | Switches | Average delay ms | Maximum delay ms | --------------------------------------------------------------------------------------- ksoftirqd/0-4 | 0.010 ms | 2 | avg: 2.476 ms | max: 2.977 ms | perf-12328 | 15.844 ms | 66 | avg: 1.118 ms | max: 9.979 ms | bdi-default-235 | 0.009 ms | 1 | avg: 0.998 ms | max: 0.998 ms | events/1-8 | 0.020 ms | 2 | avg: 0.998 ms | max: 0.998 ms | events/0-7 | 0.018 ms | 2 | avg: 0.992 ms | max: 0.996 ms | sleep-12329 | 0.742 ms | 3 | avg: 0.906 ms | max: 2.289 ms | sshd-12122 | 0.163 ms | 2 | avg: 0.283 ms | max: 0.562 ms | loop-getpid-lon-12322 | 1023.636 ms | 69 | avg: 0.208 ms | max: 5.996 ms | loop-getpid-lon-12321 | 1038.638 ms | 5 | avg: 0.073 ms | max: 0.171 ms | migration/1-5 | 0.000 ms | 1 | avg: 0.006 ms | max: 0.006 ms | --------------------------------------------------------------------------------------- TOTAL: | 2079.078 ms | 153 | ------------------------------------------------- Also, streamline the code a bit more, add asserts for various state machine failures (they should be debugged if they occur) and fix a few odd ends. Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-15 02:04:48 +08:00
avg = work_list->total_lat / work_list->nb_atoms;
timestamp__scnprintf_usec(work_list->max_lat_at, max_lat_at, sizeof(max_lat_at));
printf("|%11.3f ms |%9" PRIu64 " | avg:%9.3f ms | max:%9.3f ms | max at: %13s s\n",
(double)work_list->total_runtime / NSEC_PER_MSEC,
work_list->nb_atoms, (double)avg / NSEC_PER_MSEC,
(double)work_list->max_lat / NSEC_PER_MSEC,
max_lat_at);
}
perf sched: Add support for sched:sched_stat_runtime events This allows more precise 'perf sched latency' output: --------------------------------------------------------------------------------------- Task | Runtime ms | Switches | Average delay ms | Maximum delay ms | --------------------------------------------------------------------------------------- ksoftirqd/0-4 | 0.010 ms | 2 | avg: 2.476 ms | max: 2.977 ms | perf-12328 | 15.844 ms | 66 | avg: 1.118 ms | max: 9.979 ms | bdi-default-235 | 0.009 ms | 1 | avg: 0.998 ms | max: 0.998 ms | events/1-8 | 0.020 ms | 2 | avg: 0.998 ms | max: 0.998 ms | events/0-7 | 0.018 ms | 2 | avg: 0.992 ms | max: 0.996 ms | sleep-12329 | 0.742 ms | 3 | avg: 0.906 ms | max: 2.289 ms | sshd-12122 | 0.163 ms | 2 | avg: 0.283 ms | max: 0.562 ms | loop-getpid-lon-12322 | 1023.636 ms | 69 | avg: 0.208 ms | max: 5.996 ms | loop-getpid-lon-12321 | 1038.638 ms | 5 | avg: 0.073 ms | max: 0.171 ms | migration/1-5 | 0.000 ms | 1 | avg: 0.006 ms | max: 0.006 ms | --------------------------------------------------------------------------------------- TOTAL: | 2079.078 ms | 153 | ------------------------------------------------- Also, streamline the code a bit more, add asserts for various state machine failures (they should be debugged if they occur) and fix a few odd ends. Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-15 02:04:48 +08:00
static int pid_cmp(struct work_atoms *l, struct work_atoms *r)
perf sched: Implement multidimensional sorting Implement multidimensional sorting on perf sched so that you can sort either by number of switches, latency average, latency maximum, runtime. perf sched -l -s avg,max (this is the default) ----------------------------------------------------------------------------------- Task | Runtime ms | Switches | Average delay ms | Maximum delay ms | ----------------------------------------------------------------------------------- gnome-power-man | 0.113 ms | 1 | avg: 4998.531 ms | max: 4998.531 ms | xfdesktop | 1.190 ms | 7 | avg: 136.475 ms | max: 940.933 ms | xfce-mcs-manage | 2.194 ms | 22 | avg: 38.534 ms | max: 735.174 ms | notification-da | 2.749 ms | 31 | avg: 27.436 ms | max: 731.791 ms | xfce4-session | 3.343 ms | 28 | avg: 26.796 ms | max: 734.891 ms | xfwm4 | 3.159 ms | 22 | avg: 12.406 ms | max: 241.333 ms | xchat | 42.789 ms | 214 | avg: 11.886 ms | max: 100.349 ms | xfce4-terminal | 5.386 ms | 22 | avg: 11.414 ms | max: 241.611 ms | firefox | 151.992 ms | 123 | avg: 9.543 ms | max: 153.717 ms | xfce4-panel | 24.324 ms | 47 | avg: 8.189 ms | max: 242.352 ms | :5090 | 6.932 ms | 111 | avg: 8.131 ms | max: 102.665 ms | events/0 | 0.758 ms | 12 | avg: 1.964 ms | max: 21.879 ms | Xorg | 280.558 ms | 340 | avg: 1.864 ms | max: 99.526 ms | geany | 63.391 ms | 295 | avg: 1.099 ms | max: 9.334 ms | reiserfs/0 | 0.039 ms | 2 | avg: 0.854 ms | max: 1.487 ms | kondemand/0 | 8.251 ms | 245 | avg: 0.691 ms | max: 34.372 ms | Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-13 09:36:29 +08:00
{
if (l->thread == r->thread)
return 0;
if (l->thread->tid < r->thread->tid)
perf sched: Implement multidimensional sorting Implement multidimensional sorting on perf sched so that you can sort either by number of switches, latency average, latency maximum, runtime. perf sched -l -s avg,max (this is the default) ----------------------------------------------------------------------------------- Task | Runtime ms | Switches | Average delay ms | Maximum delay ms | ----------------------------------------------------------------------------------- gnome-power-man | 0.113 ms | 1 | avg: 4998.531 ms | max: 4998.531 ms | xfdesktop | 1.190 ms | 7 | avg: 136.475 ms | max: 940.933 ms | xfce-mcs-manage | 2.194 ms | 22 | avg: 38.534 ms | max: 735.174 ms | notification-da | 2.749 ms | 31 | avg: 27.436 ms | max: 731.791 ms | xfce4-session | 3.343 ms | 28 | avg: 26.796 ms | max: 734.891 ms | xfwm4 | 3.159 ms | 22 | avg: 12.406 ms | max: 241.333 ms | xchat | 42.789 ms | 214 | avg: 11.886 ms | max: 100.349 ms | xfce4-terminal | 5.386 ms | 22 | avg: 11.414 ms | max: 241.611 ms | firefox | 151.992 ms | 123 | avg: 9.543 ms | max: 153.717 ms | xfce4-panel | 24.324 ms | 47 | avg: 8.189 ms | max: 242.352 ms | :5090 | 6.932 ms | 111 | avg: 8.131 ms | max: 102.665 ms | events/0 | 0.758 ms | 12 | avg: 1.964 ms | max: 21.879 ms | Xorg | 280.558 ms | 340 | avg: 1.864 ms | max: 99.526 ms | geany | 63.391 ms | 295 | avg: 1.099 ms | max: 9.334 ms | reiserfs/0 | 0.039 ms | 2 | avg: 0.854 ms | max: 1.487 ms | kondemand/0 | 8.251 ms | 245 | avg: 0.691 ms | max: 34.372 ms | Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-13 09:36:29 +08:00
return -1;
if (l->thread->tid > r->thread->tid)
perf sched: Implement multidimensional sorting Implement multidimensional sorting on perf sched so that you can sort either by number of switches, latency average, latency maximum, runtime. perf sched -l -s avg,max (this is the default) ----------------------------------------------------------------------------------- Task | Runtime ms | Switches | Average delay ms | Maximum delay ms | ----------------------------------------------------------------------------------- gnome-power-man | 0.113 ms | 1 | avg: 4998.531 ms | max: 4998.531 ms | xfdesktop | 1.190 ms | 7 | avg: 136.475 ms | max: 940.933 ms | xfce-mcs-manage | 2.194 ms | 22 | avg: 38.534 ms | max: 735.174 ms | notification-da | 2.749 ms | 31 | avg: 27.436 ms | max: 731.791 ms | xfce4-session | 3.343 ms | 28 | avg: 26.796 ms | max: 734.891 ms | xfwm4 | 3.159 ms | 22 | avg: 12.406 ms | max: 241.333 ms | xchat | 42.789 ms | 214 | avg: 11.886 ms | max: 100.349 ms | xfce4-terminal | 5.386 ms | 22 | avg: 11.414 ms | max: 241.611 ms | firefox | 151.992 ms | 123 | avg: 9.543 ms | max: 153.717 ms | xfce4-panel | 24.324 ms | 47 | avg: 8.189 ms | max: 242.352 ms | :5090 | 6.932 ms | 111 | avg: 8.131 ms | max: 102.665 ms | events/0 | 0.758 ms | 12 | avg: 1.964 ms | max: 21.879 ms | Xorg | 280.558 ms | 340 | avg: 1.864 ms | max: 99.526 ms | geany | 63.391 ms | 295 | avg: 1.099 ms | max: 9.334 ms | reiserfs/0 | 0.039 ms | 2 | avg: 0.854 ms | max: 1.487 ms | kondemand/0 | 8.251 ms | 245 | avg: 0.691 ms | max: 34.372 ms | Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-13 09:36:29 +08:00
return 1;
return (int)(l->thread - r->thread);
perf sched: Implement multidimensional sorting Implement multidimensional sorting on perf sched so that you can sort either by number of switches, latency average, latency maximum, runtime. perf sched -l -s avg,max (this is the default) ----------------------------------------------------------------------------------- Task | Runtime ms | Switches | Average delay ms | Maximum delay ms | ----------------------------------------------------------------------------------- gnome-power-man | 0.113 ms | 1 | avg: 4998.531 ms | max: 4998.531 ms | xfdesktop | 1.190 ms | 7 | avg: 136.475 ms | max: 940.933 ms | xfce-mcs-manage | 2.194 ms | 22 | avg: 38.534 ms | max: 735.174 ms | notification-da | 2.749 ms | 31 | avg: 27.436 ms | max: 731.791 ms | xfce4-session | 3.343 ms | 28 | avg: 26.796 ms | max: 734.891 ms | xfwm4 | 3.159 ms | 22 | avg: 12.406 ms | max: 241.333 ms | xchat | 42.789 ms | 214 | avg: 11.886 ms | max: 100.349 ms | xfce4-terminal | 5.386 ms | 22 | avg: 11.414 ms | max: 241.611 ms | firefox | 151.992 ms | 123 | avg: 9.543 ms | max: 153.717 ms | xfce4-panel | 24.324 ms | 47 | avg: 8.189 ms | max: 242.352 ms | :5090 | 6.932 ms | 111 | avg: 8.131 ms | max: 102.665 ms | events/0 | 0.758 ms | 12 | avg: 1.964 ms | max: 21.879 ms | Xorg | 280.558 ms | 340 | avg: 1.864 ms | max: 99.526 ms | geany | 63.391 ms | 295 | avg: 1.099 ms | max: 9.334 ms | reiserfs/0 | 0.039 ms | 2 | avg: 0.854 ms | max: 1.487 ms | kondemand/0 | 8.251 ms | 245 | avg: 0.691 ms | max: 34.372 ms | Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-13 09:36:29 +08:00
}
perf sched: Add support for sched:sched_stat_runtime events This allows more precise 'perf sched latency' output: --------------------------------------------------------------------------------------- Task | Runtime ms | Switches | Average delay ms | Maximum delay ms | --------------------------------------------------------------------------------------- ksoftirqd/0-4 | 0.010 ms | 2 | avg: 2.476 ms | max: 2.977 ms | perf-12328 | 15.844 ms | 66 | avg: 1.118 ms | max: 9.979 ms | bdi-default-235 | 0.009 ms | 1 | avg: 0.998 ms | max: 0.998 ms | events/1-8 | 0.020 ms | 2 | avg: 0.998 ms | max: 0.998 ms | events/0-7 | 0.018 ms | 2 | avg: 0.992 ms | max: 0.996 ms | sleep-12329 | 0.742 ms | 3 | avg: 0.906 ms | max: 2.289 ms | sshd-12122 | 0.163 ms | 2 | avg: 0.283 ms | max: 0.562 ms | loop-getpid-lon-12322 | 1023.636 ms | 69 | avg: 0.208 ms | max: 5.996 ms | loop-getpid-lon-12321 | 1038.638 ms | 5 | avg: 0.073 ms | max: 0.171 ms | migration/1-5 | 0.000 ms | 1 | avg: 0.006 ms | max: 0.006 ms | --------------------------------------------------------------------------------------- TOTAL: | 2079.078 ms | 153 | ------------------------------------------------- Also, streamline the code a bit more, add asserts for various state machine failures (they should be debugged if they occur) and fix a few odd ends. Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-15 02:04:48 +08:00
static int avg_cmp(struct work_atoms *l, struct work_atoms *r)
perf sched: Implement multidimensional sorting Implement multidimensional sorting on perf sched so that you can sort either by number of switches, latency average, latency maximum, runtime. perf sched -l -s avg,max (this is the default) ----------------------------------------------------------------------------------- Task | Runtime ms | Switches | Average delay ms | Maximum delay ms | ----------------------------------------------------------------------------------- gnome-power-man | 0.113 ms | 1 | avg: 4998.531 ms | max: 4998.531 ms | xfdesktop | 1.190 ms | 7 | avg: 136.475 ms | max: 940.933 ms | xfce-mcs-manage | 2.194 ms | 22 | avg: 38.534 ms | max: 735.174 ms | notification-da | 2.749 ms | 31 | avg: 27.436 ms | max: 731.791 ms | xfce4-session | 3.343 ms | 28 | avg: 26.796 ms | max: 734.891 ms | xfwm4 | 3.159 ms | 22 | avg: 12.406 ms | max: 241.333 ms | xchat | 42.789 ms | 214 | avg: 11.886 ms | max: 100.349 ms | xfce4-terminal | 5.386 ms | 22 | avg: 11.414 ms | max: 241.611 ms | firefox | 151.992 ms | 123 | avg: 9.543 ms | max: 153.717 ms | xfce4-panel | 24.324 ms | 47 | avg: 8.189 ms | max: 242.352 ms | :5090 | 6.932 ms | 111 | avg: 8.131 ms | max: 102.665 ms | events/0 | 0.758 ms | 12 | avg: 1.964 ms | max: 21.879 ms | Xorg | 280.558 ms | 340 | avg: 1.864 ms | max: 99.526 ms | geany | 63.391 ms | 295 | avg: 1.099 ms | max: 9.334 ms | reiserfs/0 | 0.039 ms | 2 | avg: 0.854 ms | max: 1.487 ms | kondemand/0 | 8.251 ms | 245 | avg: 0.691 ms | max: 34.372 ms | Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-13 09:36:29 +08:00
{
u64 avgl, avgr;
if (!l->nb_atoms)
return -1;
if (!r->nb_atoms)
return 1;
avgl = l->total_lat / l->nb_atoms;
avgr = r->total_lat / r->nb_atoms;
if (avgl < avgr)
return -1;
if (avgl > avgr)
return 1;
return 0;
}
perf sched: Add support for sched:sched_stat_runtime events This allows more precise 'perf sched latency' output: --------------------------------------------------------------------------------------- Task | Runtime ms | Switches | Average delay ms | Maximum delay ms | --------------------------------------------------------------------------------------- ksoftirqd/0-4 | 0.010 ms | 2 | avg: 2.476 ms | max: 2.977 ms | perf-12328 | 15.844 ms | 66 | avg: 1.118 ms | max: 9.979 ms | bdi-default-235 | 0.009 ms | 1 | avg: 0.998 ms | max: 0.998 ms | events/1-8 | 0.020 ms | 2 | avg: 0.998 ms | max: 0.998 ms | events/0-7 | 0.018 ms | 2 | avg: 0.992 ms | max: 0.996 ms | sleep-12329 | 0.742 ms | 3 | avg: 0.906 ms | max: 2.289 ms | sshd-12122 | 0.163 ms | 2 | avg: 0.283 ms | max: 0.562 ms | loop-getpid-lon-12322 | 1023.636 ms | 69 | avg: 0.208 ms | max: 5.996 ms | loop-getpid-lon-12321 | 1038.638 ms | 5 | avg: 0.073 ms | max: 0.171 ms | migration/1-5 | 0.000 ms | 1 | avg: 0.006 ms | max: 0.006 ms | --------------------------------------------------------------------------------------- TOTAL: | 2079.078 ms | 153 | ------------------------------------------------- Also, streamline the code a bit more, add asserts for various state machine failures (they should be debugged if they occur) and fix a few odd ends. Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-15 02:04:48 +08:00
static int max_cmp(struct work_atoms *l, struct work_atoms *r)
perf sched: Implement multidimensional sorting Implement multidimensional sorting on perf sched so that you can sort either by number of switches, latency average, latency maximum, runtime. perf sched -l -s avg,max (this is the default) ----------------------------------------------------------------------------------- Task | Runtime ms | Switches | Average delay ms | Maximum delay ms | ----------------------------------------------------------------------------------- gnome-power-man | 0.113 ms | 1 | avg: 4998.531 ms | max: 4998.531 ms | xfdesktop | 1.190 ms | 7 | avg: 136.475 ms | max: 940.933 ms | xfce-mcs-manage | 2.194 ms | 22 | avg: 38.534 ms | max: 735.174 ms | notification-da | 2.749 ms | 31 | avg: 27.436 ms | max: 731.791 ms | xfce4-session | 3.343 ms | 28 | avg: 26.796 ms | max: 734.891 ms | xfwm4 | 3.159 ms | 22 | avg: 12.406 ms | max: 241.333 ms | xchat | 42.789 ms | 214 | avg: 11.886 ms | max: 100.349 ms | xfce4-terminal | 5.386 ms | 22 | avg: 11.414 ms | max: 241.611 ms | firefox | 151.992 ms | 123 | avg: 9.543 ms | max: 153.717 ms | xfce4-panel | 24.324 ms | 47 | avg: 8.189 ms | max: 242.352 ms | :5090 | 6.932 ms | 111 | avg: 8.131 ms | max: 102.665 ms | events/0 | 0.758 ms | 12 | avg: 1.964 ms | max: 21.879 ms | Xorg | 280.558 ms | 340 | avg: 1.864 ms | max: 99.526 ms | geany | 63.391 ms | 295 | avg: 1.099 ms | max: 9.334 ms | reiserfs/0 | 0.039 ms | 2 | avg: 0.854 ms | max: 1.487 ms | kondemand/0 | 8.251 ms | 245 | avg: 0.691 ms | max: 34.372 ms | Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-13 09:36:29 +08:00
{
if (l->max_lat < r->max_lat)
return -1;
if (l->max_lat > r->max_lat)
return 1;
return 0;
}
perf sched: Add support for sched:sched_stat_runtime events This allows more precise 'perf sched latency' output: --------------------------------------------------------------------------------------- Task | Runtime ms | Switches | Average delay ms | Maximum delay ms | --------------------------------------------------------------------------------------- ksoftirqd/0-4 | 0.010 ms | 2 | avg: 2.476 ms | max: 2.977 ms | perf-12328 | 15.844 ms | 66 | avg: 1.118 ms | max: 9.979 ms | bdi-default-235 | 0.009 ms | 1 | avg: 0.998 ms | max: 0.998 ms | events/1-8 | 0.020 ms | 2 | avg: 0.998 ms | max: 0.998 ms | events/0-7 | 0.018 ms | 2 | avg: 0.992 ms | max: 0.996 ms | sleep-12329 | 0.742 ms | 3 | avg: 0.906 ms | max: 2.289 ms | sshd-12122 | 0.163 ms | 2 | avg: 0.283 ms | max: 0.562 ms | loop-getpid-lon-12322 | 1023.636 ms | 69 | avg: 0.208 ms | max: 5.996 ms | loop-getpid-lon-12321 | 1038.638 ms | 5 | avg: 0.073 ms | max: 0.171 ms | migration/1-5 | 0.000 ms | 1 | avg: 0.006 ms | max: 0.006 ms | --------------------------------------------------------------------------------------- TOTAL: | 2079.078 ms | 153 | ------------------------------------------------- Also, streamline the code a bit more, add asserts for various state machine failures (they should be debugged if they occur) and fix a few odd ends. Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-15 02:04:48 +08:00
static int switch_cmp(struct work_atoms *l, struct work_atoms *r)
perf sched: Implement multidimensional sorting Implement multidimensional sorting on perf sched so that you can sort either by number of switches, latency average, latency maximum, runtime. perf sched -l -s avg,max (this is the default) ----------------------------------------------------------------------------------- Task | Runtime ms | Switches | Average delay ms | Maximum delay ms | ----------------------------------------------------------------------------------- gnome-power-man | 0.113 ms | 1 | avg: 4998.531 ms | max: 4998.531 ms | xfdesktop | 1.190 ms | 7 | avg: 136.475 ms | max: 940.933 ms | xfce-mcs-manage | 2.194 ms | 22 | avg: 38.534 ms | max: 735.174 ms | notification-da | 2.749 ms | 31 | avg: 27.436 ms | max: 731.791 ms | xfce4-session | 3.343 ms | 28 | avg: 26.796 ms | max: 734.891 ms | xfwm4 | 3.159 ms | 22 | avg: 12.406 ms | max: 241.333 ms | xchat | 42.789 ms | 214 | avg: 11.886 ms | max: 100.349 ms | xfce4-terminal | 5.386 ms | 22 | avg: 11.414 ms | max: 241.611 ms | firefox | 151.992 ms | 123 | avg: 9.543 ms | max: 153.717 ms | xfce4-panel | 24.324 ms | 47 | avg: 8.189 ms | max: 242.352 ms | :5090 | 6.932 ms | 111 | avg: 8.131 ms | max: 102.665 ms | events/0 | 0.758 ms | 12 | avg: 1.964 ms | max: 21.879 ms | Xorg | 280.558 ms | 340 | avg: 1.864 ms | max: 99.526 ms | geany | 63.391 ms | 295 | avg: 1.099 ms | max: 9.334 ms | reiserfs/0 | 0.039 ms | 2 | avg: 0.854 ms | max: 1.487 ms | kondemand/0 | 8.251 ms | 245 | avg: 0.691 ms | max: 34.372 ms | Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-13 09:36:29 +08:00
{
if (l->nb_atoms < r->nb_atoms)
return -1;
if (l->nb_atoms > r->nb_atoms)
return 1;
return 0;
}
perf sched: Add support for sched:sched_stat_runtime events This allows more precise 'perf sched latency' output: --------------------------------------------------------------------------------------- Task | Runtime ms | Switches | Average delay ms | Maximum delay ms | --------------------------------------------------------------------------------------- ksoftirqd/0-4 | 0.010 ms | 2 | avg: 2.476 ms | max: 2.977 ms | perf-12328 | 15.844 ms | 66 | avg: 1.118 ms | max: 9.979 ms | bdi-default-235 | 0.009 ms | 1 | avg: 0.998 ms | max: 0.998 ms | events/1-8 | 0.020 ms | 2 | avg: 0.998 ms | max: 0.998 ms | events/0-7 | 0.018 ms | 2 | avg: 0.992 ms | max: 0.996 ms | sleep-12329 | 0.742 ms | 3 | avg: 0.906 ms | max: 2.289 ms | sshd-12122 | 0.163 ms | 2 | avg: 0.283 ms | max: 0.562 ms | loop-getpid-lon-12322 | 1023.636 ms | 69 | avg: 0.208 ms | max: 5.996 ms | loop-getpid-lon-12321 | 1038.638 ms | 5 | avg: 0.073 ms | max: 0.171 ms | migration/1-5 | 0.000 ms | 1 | avg: 0.006 ms | max: 0.006 ms | --------------------------------------------------------------------------------------- TOTAL: | 2079.078 ms | 153 | ------------------------------------------------- Also, streamline the code a bit more, add asserts for various state machine failures (they should be debugged if they occur) and fix a few odd ends. Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-15 02:04:48 +08:00
static int runtime_cmp(struct work_atoms *l, struct work_atoms *r)
perf sched: Implement multidimensional sorting Implement multidimensional sorting on perf sched so that you can sort either by number of switches, latency average, latency maximum, runtime. perf sched -l -s avg,max (this is the default) ----------------------------------------------------------------------------------- Task | Runtime ms | Switches | Average delay ms | Maximum delay ms | ----------------------------------------------------------------------------------- gnome-power-man | 0.113 ms | 1 | avg: 4998.531 ms | max: 4998.531 ms | xfdesktop | 1.190 ms | 7 | avg: 136.475 ms | max: 940.933 ms | xfce-mcs-manage | 2.194 ms | 22 | avg: 38.534 ms | max: 735.174 ms | notification-da | 2.749 ms | 31 | avg: 27.436 ms | max: 731.791 ms | xfce4-session | 3.343 ms | 28 | avg: 26.796 ms | max: 734.891 ms | xfwm4 | 3.159 ms | 22 | avg: 12.406 ms | max: 241.333 ms | xchat | 42.789 ms | 214 | avg: 11.886 ms | max: 100.349 ms | xfce4-terminal | 5.386 ms | 22 | avg: 11.414 ms | max: 241.611 ms | firefox | 151.992 ms | 123 | avg: 9.543 ms | max: 153.717 ms | xfce4-panel | 24.324 ms | 47 | avg: 8.189 ms | max: 242.352 ms | :5090 | 6.932 ms | 111 | avg: 8.131 ms | max: 102.665 ms | events/0 | 0.758 ms | 12 | avg: 1.964 ms | max: 21.879 ms | Xorg | 280.558 ms | 340 | avg: 1.864 ms | max: 99.526 ms | geany | 63.391 ms | 295 | avg: 1.099 ms | max: 9.334 ms | reiserfs/0 | 0.039 ms | 2 | avg: 0.854 ms | max: 1.487 ms | kondemand/0 | 8.251 ms | 245 | avg: 0.691 ms | max: 34.372 ms | Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-13 09:36:29 +08:00
{
if (l->total_runtime < r->total_runtime)
return -1;
if (l->total_runtime > r->total_runtime)
return 1;
return 0;
}
static int sort_dimension__add(const char *tok, struct list_head *list)
perf sched: Implement multidimensional sorting Implement multidimensional sorting on perf sched so that you can sort either by number of switches, latency average, latency maximum, runtime. perf sched -l -s avg,max (this is the default) ----------------------------------------------------------------------------------- Task | Runtime ms | Switches | Average delay ms | Maximum delay ms | ----------------------------------------------------------------------------------- gnome-power-man | 0.113 ms | 1 | avg: 4998.531 ms | max: 4998.531 ms | xfdesktop | 1.190 ms | 7 | avg: 136.475 ms | max: 940.933 ms | xfce-mcs-manage | 2.194 ms | 22 | avg: 38.534 ms | max: 735.174 ms | notification-da | 2.749 ms | 31 | avg: 27.436 ms | max: 731.791 ms | xfce4-session | 3.343 ms | 28 | avg: 26.796 ms | max: 734.891 ms | xfwm4 | 3.159 ms | 22 | avg: 12.406 ms | max: 241.333 ms | xchat | 42.789 ms | 214 | avg: 11.886 ms | max: 100.349 ms | xfce4-terminal | 5.386 ms | 22 | avg: 11.414 ms | max: 241.611 ms | firefox | 151.992 ms | 123 | avg: 9.543 ms | max: 153.717 ms | xfce4-panel | 24.324 ms | 47 | avg: 8.189 ms | max: 242.352 ms | :5090 | 6.932 ms | 111 | avg: 8.131 ms | max: 102.665 ms | events/0 | 0.758 ms | 12 | avg: 1.964 ms | max: 21.879 ms | Xorg | 280.558 ms | 340 | avg: 1.864 ms | max: 99.526 ms | geany | 63.391 ms | 295 | avg: 1.099 ms | max: 9.334 ms | reiserfs/0 | 0.039 ms | 2 | avg: 0.854 ms | max: 1.487 ms | kondemand/0 | 8.251 ms | 245 | avg: 0.691 ms | max: 34.372 ms | Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-13 09:36:29 +08:00
{
size_t i;
static struct sort_dimension avg_sort_dimension = {
.name = "avg",
.cmp = avg_cmp,
};
static struct sort_dimension max_sort_dimension = {
.name = "max",
.cmp = max_cmp,
};
static struct sort_dimension pid_sort_dimension = {
.name = "pid",
.cmp = pid_cmp,
};
static struct sort_dimension runtime_sort_dimension = {
.name = "runtime",
.cmp = runtime_cmp,
};
static struct sort_dimension switch_sort_dimension = {
.name = "switch",
.cmp = switch_cmp,
};
struct sort_dimension *available_sorts[] = {
&pid_sort_dimension,
&avg_sort_dimension,
&max_sort_dimension,
&switch_sort_dimension,
&runtime_sort_dimension,
};
perf sched: Implement multidimensional sorting Implement multidimensional sorting on perf sched so that you can sort either by number of switches, latency average, latency maximum, runtime. perf sched -l -s avg,max (this is the default) ----------------------------------------------------------------------------------- Task | Runtime ms | Switches | Average delay ms | Maximum delay ms | ----------------------------------------------------------------------------------- gnome-power-man | 0.113 ms | 1 | avg: 4998.531 ms | max: 4998.531 ms | xfdesktop | 1.190 ms | 7 | avg: 136.475 ms | max: 940.933 ms | xfce-mcs-manage | 2.194 ms | 22 | avg: 38.534 ms | max: 735.174 ms | notification-da | 2.749 ms | 31 | avg: 27.436 ms | max: 731.791 ms | xfce4-session | 3.343 ms | 28 | avg: 26.796 ms | max: 734.891 ms | xfwm4 | 3.159 ms | 22 | avg: 12.406 ms | max: 241.333 ms | xchat | 42.789 ms | 214 | avg: 11.886 ms | max: 100.349 ms | xfce4-terminal | 5.386 ms | 22 | avg: 11.414 ms | max: 241.611 ms | firefox | 151.992 ms | 123 | avg: 9.543 ms | max: 153.717 ms | xfce4-panel | 24.324 ms | 47 | avg: 8.189 ms | max: 242.352 ms | :5090 | 6.932 ms | 111 | avg: 8.131 ms | max: 102.665 ms | events/0 | 0.758 ms | 12 | avg: 1.964 ms | max: 21.879 ms | Xorg | 280.558 ms | 340 | avg: 1.864 ms | max: 99.526 ms | geany | 63.391 ms | 295 | avg: 1.099 ms | max: 9.334 ms | reiserfs/0 | 0.039 ms | 2 | avg: 0.854 ms | max: 1.487 ms | kondemand/0 | 8.251 ms | 245 | avg: 0.691 ms | max: 34.372 ms | Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-13 09:36:29 +08:00
for (i = 0; i < ARRAY_SIZE(available_sorts); i++) {
perf sched: Implement multidimensional sorting Implement multidimensional sorting on perf sched so that you can sort either by number of switches, latency average, latency maximum, runtime. perf sched -l -s avg,max (this is the default) ----------------------------------------------------------------------------------- Task | Runtime ms | Switches | Average delay ms | Maximum delay ms | ----------------------------------------------------------------------------------- gnome-power-man | 0.113 ms | 1 | avg: 4998.531 ms | max: 4998.531 ms | xfdesktop | 1.190 ms | 7 | avg: 136.475 ms | max: 940.933 ms | xfce-mcs-manage | 2.194 ms | 22 | avg: 38.534 ms | max: 735.174 ms | notification-da | 2.749 ms | 31 | avg: 27.436 ms | max: 731.791 ms | xfce4-session | 3.343 ms | 28 | avg: 26.796 ms | max: 734.891 ms | xfwm4 | 3.159 ms | 22 | avg: 12.406 ms | max: 241.333 ms | xchat | 42.789 ms | 214 | avg: 11.886 ms | max: 100.349 ms | xfce4-terminal | 5.386 ms | 22 | avg: 11.414 ms | max: 241.611 ms | firefox | 151.992 ms | 123 | avg: 9.543 ms | max: 153.717 ms | xfce4-panel | 24.324 ms | 47 | avg: 8.189 ms | max: 242.352 ms | :5090 | 6.932 ms | 111 | avg: 8.131 ms | max: 102.665 ms | events/0 | 0.758 ms | 12 | avg: 1.964 ms | max: 21.879 ms | Xorg | 280.558 ms | 340 | avg: 1.864 ms | max: 99.526 ms | geany | 63.391 ms | 295 | avg: 1.099 ms | max: 9.334 ms | reiserfs/0 | 0.039 ms | 2 | avg: 0.854 ms | max: 1.487 ms | kondemand/0 | 8.251 ms | 245 | avg: 0.691 ms | max: 34.372 ms | Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-13 09:36:29 +08:00
if (!strcmp(available_sorts[i]->name, tok)) {
list_add_tail(&available_sorts[i]->list, list);
return 0;
}
}
return -1;
}
static void perf_sched__sort_lat(struct perf_sched *sched)
perf sched: Implement multidimensional sorting Implement multidimensional sorting on perf sched so that you can sort either by number of switches, latency average, latency maximum, runtime. perf sched -l -s avg,max (this is the default) ----------------------------------------------------------------------------------- Task | Runtime ms | Switches | Average delay ms | Maximum delay ms | ----------------------------------------------------------------------------------- gnome-power-man | 0.113 ms | 1 | avg: 4998.531 ms | max: 4998.531 ms | xfdesktop | 1.190 ms | 7 | avg: 136.475 ms | max: 940.933 ms | xfce-mcs-manage | 2.194 ms | 22 | avg: 38.534 ms | max: 735.174 ms | notification-da | 2.749 ms | 31 | avg: 27.436 ms | max: 731.791 ms | xfce4-session | 3.343 ms | 28 | avg: 26.796 ms | max: 734.891 ms | xfwm4 | 3.159 ms | 22 | avg: 12.406 ms | max: 241.333 ms | xchat | 42.789 ms | 214 | avg: 11.886 ms | max: 100.349 ms | xfce4-terminal | 5.386 ms | 22 | avg: 11.414 ms | max: 241.611 ms | firefox | 151.992 ms | 123 | avg: 9.543 ms | max: 153.717 ms | xfce4-panel | 24.324 ms | 47 | avg: 8.189 ms | max: 242.352 ms | :5090 | 6.932 ms | 111 | avg: 8.131 ms | max: 102.665 ms | events/0 | 0.758 ms | 12 | avg: 1.964 ms | max: 21.879 ms | Xorg | 280.558 ms | 340 | avg: 1.864 ms | max: 99.526 ms | geany | 63.391 ms | 295 | avg: 1.099 ms | max: 9.334 ms | reiserfs/0 | 0.039 ms | 2 | avg: 0.854 ms | max: 1.487 ms | kondemand/0 | 8.251 ms | 245 | avg: 0.691 ms | max: 34.372 ms | Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-13 09:36:29 +08:00
{
struct rb_node *node;
struct rb_root_cached *root = &sched->atom_root;
perf sched: Add option to merge like comms to lat output Sometimes when debugging large multi-threaded applications it is helpful to collate all of the latency numbers into one bulk record to get an idea of what is going on. This patch does this by merging any entries that belong to the same comm into one entry and then spits out those totals. I've also slightly changed the output so you can see how many threads were merged in the processing. Here is the new default output format ----------------------------------------------------------------------------------------------------------- Task | Runtime ms | Switches | Average delay ms | Maximum delay ms | Maximum delay at | ----------------------------------------------------------------------------------------------------------- chrome:(23) | 740.878 ms | 2612 | avg: 0.022 ms | max: 0.845 ms | max at: 7935.254223 s pulseaudio:1523 | 94.440 ms | 597 | avg: 0.027 ms | max: 0.110 ms | max at: 7934.668372 s threaded-ml:6042 | 72.554 ms | 386 | avg: 0.035 ms | max: 1.186 ms | max at: 7935.330911 s Chrome_IOThread:3832 | 52.388 ms | 456 | avg: 0.021 ms | max: 1.365 ms | max at: 7935.330602 s Chrome_ChildIOT:(7) | 50.694 ms | 743 | avg: 0.021 ms | max: 1.448 ms | max at: 7935.256659 s Compositor:5510 | 30.012 ms | 192 | avg: 0.019 ms | max: 0.131 ms | max at: 7936.636815 s plugin_audio_th:6043 | 24.828 ms | 314 | avg: 0.018 ms | max: 0.143 ms | max at: 7936.205994 s CompositorTileW:(2) | 14.099 ms | 45 | avg: 0.022 ms | max: 0.153 ms | max at: 7937.521800 s the (#) after the task is the number of tasks merged, and then if there were no tasks merged it just shows the pid. Here is the same trace file with the -p option to print the per-pid latency numbers ----------------------------------------------------------------------------------------------------------- Task | Runtime ms | Switches | Average delay ms | Maximum delay ms | Maximum delay at | ----------------------------------------------------------------------------------------------------------- chrome:5500 | 386.872 ms | 387 | avg: 0.023 ms | max: 0.241 ms | max at: 7936.001694 s pulseaudio:1523 | 94.440 ms | 597 | avg: 0.027 ms | max: 0.110 ms | max at: 7934.668372 s threaded-ml:6042 | 72.554 ms | 386 | avg: 0.035 ms | max: 1.186 ms | max at: 7935.330911 s chrome:10226 | 69.710 ms | 251 | avg: 0.023 ms | max: 0.764 ms | max at: 7935.992305 s chrome:4267 | 64.551 ms | 418 | avg: 0.021 ms | max: 0.294 ms | max at: 7937.862427 s chrome:4827 | 62.268 ms | 54 | avg: 0.029 ms | max: 0.666 ms | max at: 7935.992813 s Chrome_IOThread:3832 | 52.388 ms | 456 | avg: 0.021 ms | max: 1.365 ms | max at: 7935.330602 s chrome:3776 | 46.150 ms | 349 | avg: 0.023 ms | max: 0.845 ms | max at: 7935.254223 s Signed-off-by: Josef Bacik <jbacik@fb.com> Acked-by: Ingo Molnar <mingo@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: kernel-team@fb.com Link: http://lkml.kernel.org/r/1432300720-30478-1-git-send-email-jbacik@fb.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-05-22 21:18:40 +08:00
again:
perf sched: Implement multidimensional sorting Implement multidimensional sorting on perf sched so that you can sort either by number of switches, latency average, latency maximum, runtime. perf sched -l -s avg,max (this is the default) ----------------------------------------------------------------------------------- Task | Runtime ms | Switches | Average delay ms | Maximum delay ms | ----------------------------------------------------------------------------------- gnome-power-man | 0.113 ms | 1 | avg: 4998.531 ms | max: 4998.531 ms | xfdesktop | 1.190 ms | 7 | avg: 136.475 ms | max: 940.933 ms | xfce-mcs-manage | 2.194 ms | 22 | avg: 38.534 ms | max: 735.174 ms | notification-da | 2.749 ms | 31 | avg: 27.436 ms | max: 731.791 ms | xfce4-session | 3.343 ms | 28 | avg: 26.796 ms | max: 734.891 ms | xfwm4 | 3.159 ms | 22 | avg: 12.406 ms | max: 241.333 ms | xchat | 42.789 ms | 214 | avg: 11.886 ms | max: 100.349 ms | xfce4-terminal | 5.386 ms | 22 | avg: 11.414 ms | max: 241.611 ms | firefox | 151.992 ms | 123 | avg: 9.543 ms | max: 153.717 ms | xfce4-panel | 24.324 ms | 47 | avg: 8.189 ms | max: 242.352 ms | :5090 | 6.932 ms | 111 | avg: 8.131 ms | max: 102.665 ms | events/0 | 0.758 ms | 12 | avg: 1.964 ms | max: 21.879 ms | Xorg | 280.558 ms | 340 | avg: 1.864 ms | max: 99.526 ms | geany | 63.391 ms | 295 | avg: 1.099 ms | max: 9.334 ms | reiserfs/0 | 0.039 ms | 2 | avg: 0.854 ms | max: 1.487 ms | kondemand/0 | 8.251 ms | 245 | avg: 0.691 ms | max: 34.372 ms | Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-13 09:36:29 +08:00
for (;;) {
perf sched: Add support for sched:sched_stat_runtime events This allows more precise 'perf sched latency' output: --------------------------------------------------------------------------------------- Task | Runtime ms | Switches | Average delay ms | Maximum delay ms | --------------------------------------------------------------------------------------- ksoftirqd/0-4 | 0.010 ms | 2 | avg: 2.476 ms | max: 2.977 ms | perf-12328 | 15.844 ms | 66 | avg: 1.118 ms | max: 9.979 ms | bdi-default-235 | 0.009 ms | 1 | avg: 0.998 ms | max: 0.998 ms | events/1-8 | 0.020 ms | 2 | avg: 0.998 ms | max: 0.998 ms | events/0-7 | 0.018 ms | 2 | avg: 0.992 ms | max: 0.996 ms | sleep-12329 | 0.742 ms | 3 | avg: 0.906 ms | max: 2.289 ms | sshd-12122 | 0.163 ms | 2 | avg: 0.283 ms | max: 0.562 ms | loop-getpid-lon-12322 | 1023.636 ms | 69 | avg: 0.208 ms | max: 5.996 ms | loop-getpid-lon-12321 | 1038.638 ms | 5 | avg: 0.073 ms | max: 0.171 ms | migration/1-5 | 0.000 ms | 1 | avg: 0.006 ms | max: 0.006 ms | --------------------------------------------------------------------------------------- TOTAL: | 2079.078 ms | 153 | ------------------------------------------------- Also, streamline the code a bit more, add asserts for various state machine failures (they should be debugged if they occur) and fix a few odd ends. Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-15 02:04:48 +08:00
struct work_atoms *data;
node = rb_first_cached(root);
perf sched: Implement multidimensional sorting Implement multidimensional sorting on perf sched so that you can sort either by number of switches, latency average, latency maximum, runtime. perf sched -l -s avg,max (this is the default) ----------------------------------------------------------------------------------- Task | Runtime ms | Switches | Average delay ms | Maximum delay ms | ----------------------------------------------------------------------------------- gnome-power-man | 0.113 ms | 1 | avg: 4998.531 ms | max: 4998.531 ms | xfdesktop | 1.190 ms | 7 | avg: 136.475 ms | max: 940.933 ms | xfce-mcs-manage | 2.194 ms | 22 | avg: 38.534 ms | max: 735.174 ms | notification-da | 2.749 ms | 31 | avg: 27.436 ms | max: 731.791 ms | xfce4-session | 3.343 ms | 28 | avg: 26.796 ms | max: 734.891 ms | xfwm4 | 3.159 ms | 22 | avg: 12.406 ms | max: 241.333 ms | xchat | 42.789 ms | 214 | avg: 11.886 ms | max: 100.349 ms | xfce4-terminal | 5.386 ms | 22 | avg: 11.414 ms | max: 241.611 ms | firefox | 151.992 ms | 123 | avg: 9.543 ms | max: 153.717 ms | xfce4-panel | 24.324 ms | 47 | avg: 8.189 ms | max: 242.352 ms | :5090 | 6.932 ms | 111 | avg: 8.131 ms | max: 102.665 ms | events/0 | 0.758 ms | 12 | avg: 1.964 ms | max: 21.879 ms | Xorg | 280.558 ms | 340 | avg: 1.864 ms | max: 99.526 ms | geany | 63.391 ms | 295 | avg: 1.099 ms | max: 9.334 ms | reiserfs/0 | 0.039 ms | 2 | avg: 0.854 ms | max: 1.487 ms | kondemand/0 | 8.251 ms | 245 | avg: 0.691 ms | max: 34.372 ms | Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-13 09:36:29 +08:00
if (!node)
break;
rb_erase_cached(node, root);
perf sched: Add support for sched:sched_stat_runtime events This allows more precise 'perf sched latency' output: --------------------------------------------------------------------------------------- Task | Runtime ms | Switches | Average delay ms | Maximum delay ms | --------------------------------------------------------------------------------------- ksoftirqd/0-4 | 0.010 ms | 2 | avg: 2.476 ms | max: 2.977 ms | perf-12328 | 15.844 ms | 66 | avg: 1.118 ms | max: 9.979 ms | bdi-default-235 | 0.009 ms | 1 | avg: 0.998 ms | max: 0.998 ms | events/1-8 | 0.020 ms | 2 | avg: 0.998 ms | max: 0.998 ms | events/0-7 | 0.018 ms | 2 | avg: 0.992 ms | max: 0.996 ms | sleep-12329 | 0.742 ms | 3 | avg: 0.906 ms | max: 2.289 ms | sshd-12122 | 0.163 ms | 2 | avg: 0.283 ms | max: 0.562 ms | loop-getpid-lon-12322 | 1023.636 ms | 69 | avg: 0.208 ms | max: 5.996 ms | loop-getpid-lon-12321 | 1038.638 ms | 5 | avg: 0.073 ms | max: 0.171 ms | migration/1-5 | 0.000 ms | 1 | avg: 0.006 ms | max: 0.006 ms | --------------------------------------------------------------------------------------- TOTAL: | 2079.078 ms | 153 | ------------------------------------------------- Also, streamline the code a bit more, add asserts for various state machine failures (they should be debugged if they occur) and fix a few odd ends. Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-15 02:04:48 +08:00
data = rb_entry(node, struct work_atoms, node);
__thread_latency_insert(&sched->sorted_atom_root, data, &sched->sort_list);
perf sched: Implement multidimensional sorting Implement multidimensional sorting on perf sched so that you can sort either by number of switches, latency average, latency maximum, runtime. perf sched -l -s avg,max (this is the default) ----------------------------------------------------------------------------------- Task | Runtime ms | Switches | Average delay ms | Maximum delay ms | ----------------------------------------------------------------------------------- gnome-power-man | 0.113 ms | 1 | avg: 4998.531 ms | max: 4998.531 ms | xfdesktop | 1.190 ms | 7 | avg: 136.475 ms | max: 940.933 ms | xfce-mcs-manage | 2.194 ms | 22 | avg: 38.534 ms | max: 735.174 ms | notification-da | 2.749 ms | 31 | avg: 27.436 ms | max: 731.791 ms | xfce4-session | 3.343 ms | 28 | avg: 26.796 ms | max: 734.891 ms | xfwm4 | 3.159 ms | 22 | avg: 12.406 ms | max: 241.333 ms | xchat | 42.789 ms | 214 | avg: 11.886 ms | max: 100.349 ms | xfce4-terminal | 5.386 ms | 22 | avg: 11.414 ms | max: 241.611 ms | firefox | 151.992 ms | 123 | avg: 9.543 ms | max: 153.717 ms | xfce4-panel | 24.324 ms | 47 | avg: 8.189 ms | max: 242.352 ms | :5090 | 6.932 ms | 111 | avg: 8.131 ms | max: 102.665 ms | events/0 | 0.758 ms | 12 | avg: 1.964 ms | max: 21.879 ms | Xorg | 280.558 ms | 340 | avg: 1.864 ms | max: 99.526 ms | geany | 63.391 ms | 295 | avg: 1.099 ms | max: 9.334 ms | reiserfs/0 | 0.039 ms | 2 | avg: 0.854 ms | max: 1.487 ms | kondemand/0 | 8.251 ms | 245 | avg: 0.691 ms | max: 34.372 ms | Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-13 09:36:29 +08:00
}
perf sched: Add option to merge like comms to lat output Sometimes when debugging large multi-threaded applications it is helpful to collate all of the latency numbers into one bulk record to get an idea of what is going on. This patch does this by merging any entries that belong to the same comm into one entry and then spits out those totals. I've also slightly changed the output so you can see how many threads were merged in the processing. Here is the new default output format ----------------------------------------------------------------------------------------------------------- Task | Runtime ms | Switches | Average delay ms | Maximum delay ms | Maximum delay at | ----------------------------------------------------------------------------------------------------------- chrome:(23) | 740.878 ms | 2612 | avg: 0.022 ms | max: 0.845 ms | max at: 7935.254223 s pulseaudio:1523 | 94.440 ms | 597 | avg: 0.027 ms | max: 0.110 ms | max at: 7934.668372 s threaded-ml:6042 | 72.554 ms | 386 | avg: 0.035 ms | max: 1.186 ms | max at: 7935.330911 s Chrome_IOThread:3832 | 52.388 ms | 456 | avg: 0.021 ms | max: 1.365 ms | max at: 7935.330602 s Chrome_ChildIOT:(7) | 50.694 ms | 743 | avg: 0.021 ms | max: 1.448 ms | max at: 7935.256659 s Compositor:5510 | 30.012 ms | 192 | avg: 0.019 ms | max: 0.131 ms | max at: 7936.636815 s plugin_audio_th:6043 | 24.828 ms | 314 | avg: 0.018 ms | max: 0.143 ms | max at: 7936.205994 s CompositorTileW:(2) | 14.099 ms | 45 | avg: 0.022 ms | max: 0.153 ms | max at: 7937.521800 s the (#) after the task is the number of tasks merged, and then if there were no tasks merged it just shows the pid. Here is the same trace file with the -p option to print the per-pid latency numbers ----------------------------------------------------------------------------------------------------------- Task | Runtime ms | Switches | Average delay ms | Maximum delay ms | Maximum delay at | ----------------------------------------------------------------------------------------------------------- chrome:5500 | 386.872 ms | 387 | avg: 0.023 ms | max: 0.241 ms | max at: 7936.001694 s pulseaudio:1523 | 94.440 ms | 597 | avg: 0.027 ms | max: 0.110 ms | max at: 7934.668372 s threaded-ml:6042 | 72.554 ms | 386 | avg: 0.035 ms | max: 1.186 ms | max at: 7935.330911 s chrome:10226 | 69.710 ms | 251 | avg: 0.023 ms | max: 0.764 ms | max at: 7935.992305 s chrome:4267 | 64.551 ms | 418 | avg: 0.021 ms | max: 0.294 ms | max at: 7937.862427 s chrome:4827 | 62.268 ms | 54 | avg: 0.029 ms | max: 0.666 ms | max at: 7935.992813 s Chrome_IOThread:3832 | 52.388 ms | 456 | avg: 0.021 ms | max: 1.365 ms | max at: 7935.330602 s chrome:3776 | 46.150 ms | 349 | avg: 0.023 ms | max: 0.845 ms | max at: 7935.254223 s Signed-off-by: Josef Bacik <jbacik@fb.com> Acked-by: Ingo Molnar <mingo@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: kernel-team@fb.com Link: http://lkml.kernel.org/r/1432300720-30478-1-git-send-email-jbacik@fb.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-05-22 21:18:40 +08:00
if (root == &sched->atom_root) {
root = &sched->merged_atom_root;
goto again;
}
perf sched: Implement multidimensional sorting Implement multidimensional sorting on perf sched so that you can sort either by number of switches, latency average, latency maximum, runtime. perf sched -l -s avg,max (this is the default) ----------------------------------------------------------------------------------- Task | Runtime ms | Switches | Average delay ms | Maximum delay ms | ----------------------------------------------------------------------------------- gnome-power-man | 0.113 ms | 1 | avg: 4998.531 ms | max: 4998.531 ms | xfdesktop | 1.190 ms | 7 | avg: 136.475 ms | max: 940.933 ms | xfce-mcs-manage | 2.194 ms | 22 | avg: 38.534 ms | max: 735.174 ms | notification-da | 2.749 ms | 31 | avg: 27.436 ms | max: 731.791 ms | xfce4-session | 3.343 ms | 28 | avg: 26.796 ms | max: 734.891 ms | xfwm4 | 3.159 ms | 22 | avg: 12.406 ms | max: 241.333 ms | xchat | 42.789 ms | 214 | avg: 11.886 ms | max: 100.349 ms | xfce4-terminal | 5.386 ms | 22 | avg: 11.414 ms | max: 241.611 ms | firefox | 151.992 ms | 123 | avg: 9.543 ms | max: 153.717 ms | xfce4-panel | 24.324 ms | 47 | avg: 8.189 ms | max: 242.352 ms | :5090 | 6.932 ms | 111 | avg: 8.131 ms | max: 102.665 ms | events/0 | 0.758 ms | 12 | avg: 1.964 ms | max: 21.879 ms | Xorg | 280.558 ms | 340 | avg: 1.864 ms | max: 99.526 ms | geany | 63.391 ms | 295 | avg: 1.099 ms | max: 9.334 ms | reiserfs/0 | 0.039 ms | 2 | avg: 0.854 ms | max: 1.487 ms | kondemand/0 | 8.251 ms | 245 | avg: 0.691 ms | max: 34.372 ms | Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-13 09:36:29 +08:00
}
static int process_sched_wakeup_event(struct perf_tool *tool,
struct evsel *evsel,
perf tools: Use __maybe_used for unused variables perf defines both __used and __unused variables to use for marking unused variables. The variable __used is defined to __attribute__((__unused__)), which contradicts the kernel definition to __attribute__((__used__)) for new gcc versions. On Android, __used is also defined in system headers and this leads to warnings like: warning: '__used__' attribute ignored __unused is not defined in the kernel and is not a standard definition. If __unused is included everywhere instead of __used, this leads to conflicts with glibc headers, since glibc has a variables with this name in its headers. The best approach is to use __maybe_unused, the definition used in the kernel for __attribute__((unused)). In this way there is only one definition in perf sources (instead of 2 definitions that point to the same thing: __used and __unused) and it works on both Linux and Android. This patch simply replaces all instances of __used and __unused with __maybe_unused. Signed-off-by: Irina Tirdea <irina.tirdea@intel.com> Acked-by: Pekka Enberg <penberg@kernel.org> Cc: David Ahern <dsahern@gmail.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Namhyung Kim <namhyung.kim@lge.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Steven Rostedt <rostedt@goodmis.org> Link: http://lkml.kernel.org/r/1347315303-29906-7-git-send-email-irina.tirdea@intel.com [ committer note: fixed up conflict with a116e05 in builtin-sched.c ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-09-11 06:15:03 +08:00
struct perf_sample *sample,
struct machine *machine)
{
struct perf_sched *sched = container_of(tool, struct perf_sched, tool);
perf sched: Don't read all tracepoint variables in advance Do it just at the actual consumer of these fields, that way we avoid needless lookups: [root@sandy ~]# perf sched record sleep 30s [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 8.585 MB perf.data (~375063 samples) ] Before: [root@sandy ~]# perf stat -r 10 perf sched lat > /dev/null Performance counter stats for 'perf sched lat' (10 runs): 103.592215 task-clock # 0.993 CPUs utilized ( +- 0.33% ) 12 context-switches # 0.114 K/sec ( +- 3.29% ) 0 cpu-migrations # 0.000 K/sec 7,605 page-faults # 0.073 M/sec ( +- 0.00% ) 345,796,112 cycles # 3.338 GHz ( +- 0.07% ) [82.90%] 106,876,796 stalled-cycles-frontend # 30.91% frontend cycles idle ( +- 0.38% ) [83.23%] 62,060,877 stalled-cycles-backend # 17.95% backend cycles idle ( +- 0.80% ) [67.14%] 628,246,586 instructions # 1.82 insns per cycle # 0.17 stalled cycles per insn ( +- 0.04% ) [83.64%] 134,962,057 branches # 1302.820 M/sec ( +- 0.10% ) [83.64%] 1,233,037 branch-misses # 0.91% of all branches ( +- 0.29% ) [83.41%] 0.104333272 seconds time elapsed ( +- 0.33% ) [root@sandy ~]# perf stat -r 10 perf sched lat > /dev/null Performance counter stats for 'perf sched lat' (10 runs): 98.848272 task-clock # 0.993 CPUs utilized ( +- 0.48% ) 11 context-switches # 0.112 K/sec ( +- 2.83% ) 0 cpu-migrations # 0.003 K/sec ( +- 50.92% ) 7,604 page-faults # 0.077 M/sec ( +- 0.00% ) 332,216,085 cycles # 3.361 GHz ( +- 0.14% ) [82.87%] 100,623,710 stalled-cycles-frontend # 30.29% frontend cycles idle ( +- 0.53% ) [82.95%] 58,788,692 stalled-cycles-backend # 17.70% backend cycles idle ( +- 0.59% ) [67.15%] 609,402,433 instructions # 1.83 insns per cycle # 0.17 stalled cycles per insn ( +- 0.04% ) [83.76%] 131,277,138 branches # 1328.067 M/sec ( +- 0.06% ) [83.77%] 1,117,871 branch-misses # 0.85% of all branches ( +- 0.32% ) [83.51%] 0.099580430 seconds time elapsed ( +- 0.48% ) [root@sandy ~]# Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Namhyung Kim <namhyung@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-kracdpw8wqlr0xjh75uk8g11@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-09-12 06:29:17 +08:00
if (sched->tp_handler->wakeup_event)
return sched->tp_handler->wakeup_event(sched, evsel, sample, machine);
perf sched: Use perf_evsel__{int,str}val This patch also stops reading the common fields, as they were not being used except for one ->common_pid case that was replaced by sample->tid, i.e. the info is already in the perf_sample struct. Also it only fills the _event structures when there is a handler. [root@sandy ~]# perf sched record sleep 30s [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 8.585 MB perf.data (~375063 samples) ] Before: [root@sandy ~]# perf stat -r 10 perf sched lat > /dev/null Performance counter stats for 'perf sched lat' (10 runs): 129.117838 task-clock # 0.994 CPUs utilized ( +- 0.28% ) 14 context-switches # 0.111 K/sec ( +- 2.10% ) 0 cpu-migrations # 0.002 K/sec ( +- 66.67% ) 7,654 page-faults # 0.059 M/sec ( +- 0.67% ) 438,121,661 cycles # 3.393 GHz ( +- 0.06% ) [83.06%] 150,808,605 stalled-cycles-frontend # 34.42% frontend cycles idle ( +- 0.14% ) [83.10%] 80,748,941 stalled-cycles-backend # 18.43% backend cycles idle ( +- 0.64% ) [66.73%] 758,605,879 instructions # 1.73 insns per cycle # 0.20 stalled cycles per insn ( +- 0.08% ) [83.54%] 162,164,321 branches # 1255.940 M/sec ( +- 0.10% ) [83.70%] 1,609,903 branch-misses # 0.99% of all branches ( +- 0.08% ) [83.62%] 0.129949153 seconds time elapsed ( +- 0.28% ) After: [root@sandy ~]# perf stat -r 10 perf sched lat > /dev/null Performance counter stats for 'perf sched lat' (10 runs): 103.592215 task-clock # 0.993 CPUs utilized ( +- 0.33% ) 12 context-switches # 0.114 K/sec ( +- 3.29% ) 0 cpu-migrations # 0.000 K/sec 7,605 page-faults # 0.073 M/sec ( +- 0.00% ) 345,796,112 cycles # 3.338 GHz ( +- 0.07% ) [82.90%] 106,876,796 stalled-cycles-frontend # 30.91% frontend cycles idle ( +- 0.38% ) [83.23%] 62,060,877 stalled-cycles-backend # 17.95% backend cycles idle ( +- 0.80% ) [67.14%] 628,246,586 instructions # 1.82 insns per cycle # 0.17 stalled cycles per insn ( +- 0.04% ) [83.64%] 134,962,057 branches # 1302.820 M/sec ( +- 0.10% ) [83.64%] 1,233,037 branch-misses # 0.91% of all branches ( +- 0.29% ) [83.41%] 0.104333272 seconds time elapsed ( +- 0.33% ) [root@sandy ~]# Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Namhyung Kim <namhyung@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-weu9t63zkrfrazkn0gxj48xy@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-09-12 06:29:17 +08:00
return 0;
}
union map_priv {
void *ptr;
bool color;
};
static bool thread__has_color(struct thread *thread)
{
union map_priv priv = {
.ptr = thread__priv(thread),
};
return priv.color;
}
static struct thread*
map__findnew_thread(struct perf_sched *sched, struct machine *machine, pid_t pid, pid_t tid)
{
struct thread *thread = machine__findnew_thread(machine, pid, tid);
union map_priv priv = {
.color = false,
};
if (!sched->map.color_pids || !thread || thread__priv(thread))
return thread;
if (thread_map__has(sched->map.color_pids, tid))
priv.color = true;
thread__set_priv(thread, priv.ptr);
return thread;
}
static int map_switch_event(struct perf_sched *sched, struct evsel *evsel,
perf sched: Don't read all tracepoint variables in advance Do it just at the actual consumer of these fields, that way we avoid needless lookups: [root@sandy ~]# perf sched record sleep 30s [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 8.585 MB perf.data (~375063 samples) ] Before: [root@sandy ~]# perf stat -r 10 perf sched lat > /dev/null Performance counter stats for 'perf sched lat' (10 runs): 103.592215 task-clock # 0.993 CPUs utilized ( +- 0.33% ) 12 context-switches # 0.114 K/sec ( +- 3.29% ) 0 cpu-migrations # 0.000 K/sec 7,605 page-faults # 0.073 M/sec ( +- 0.00% ) 345,796,112 cycles # 3.338 GHz ( +- 0.07% ) [82.90%] 106,876,796 stalled-cycles-frontend # 30.91% frontend cycles idle ( +- 0.38% ) [83.23%] 62,060,877 stalled-cycles-backend # 17.95% backend cycles idle ( +- 0.80% ) [67.14%] 628,246,586 instructions # 1.82 insns per cycle # 0.17 stalled cycles per insn ( +- 0.04% ) [83.64%] 134,962,057 branches # 1302.820 M/sec ( +- 0.10% ) [83.64%] 1,233,037 branch-misses # 0.91% of all branches ( +- 0.29% ) [83.41%] 0.104333272 seconds time elapsed ( +- 0.33% ) [root@sandy ~]# perf stat -r 10 perf sched lat > /dev/null Performance counter stats for 'perf sched lat' (10 runs): 98.848272 task-clock # 0.993 CPUs utilized ( +- 0.48% ) 11 context-switches # 0.112 K/sec ( +- 2.83% ) 0 cpu-migrations # 0.003 K/sec ( +- 50.92% ) 7,604 page-faults # 0.077 M/sec ( +- 0.00% ) 332,216,085 cycles # 3.361 GHz ( +- 0.14% ) [82.87%] 100,623,710 stalled-cycles-frontend # 30.29% frontend cycles idle ( +- 0.53% ) [82.95%] 58,788,692 stalled-cycles-backend # 17.70% backend cycles idle ( +- 0.59% ) [67.15%] 609,402,433 instructions # 1.83 insns per cycle # 0.17 stalled cycles per insn ( +- 0.04% ) [83.76%] 131,277,138 branches # 1328.067 M/sec ( +- 0.06% ) [83.77%] 1,117,871 branch-misses # 0.85% of all branches ( +- 0.32% ) [83.51%] 0.099580430 seconds time elapsed ( +- 0.48% ) [root@sandy ~]# Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Namhyung Kim <namhyung@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-kracdpw8wqlr0xjh75uk8g11@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-09-12 06:29:17 +08:00
struct perf_sample *sample, struct machine *machine)
perf sched: Add 'perf sched map' scheduling event map printout This prints a textual context-switching outline of workload captured via perf sched record. For example, on a 16 CPU box it outputs: N1 O1 . . . S1 . . . B0 . *I0 C1 . M1 . 23002.773423 secs N1 O1 . *Q0 . S1 . . . B0 . I0 C1 . M1 . 23002.773423 secs N1 O1 . Q0 . S1 . . . B0 . *R1 C1 . M1 . 23002.773485 secs N1 O1 . Q0 . S1 . *S0 . B0 . R1 C1 . M1 . 23002.773478 secs *L0 O1 . Q0 . S1 . S0 . B0 . R1 C1 . M1 . 23002.773523 secs L0 O1 . *. . S1 . S0 . B0 . R1 C1 . M1 . 23002.773531 secs L0 O1 . . . S1 . S0 . B0 . R1 C1 *T1 M1 . 23002.773547 secs T1 => irqbalance:2089 L0 O1 . . . S1 . S0 . *P0 . R1 C1 T1 M1 . 23002.773549 secs *N1 O1 . . . S1 . S0 . P0 . R1 C1 T1 M1 . 23002.773566 secs N1 O1 . . . *J0 . S0 . P0 . R1 C1 T1 M1 . 23002.773571 secs N1 O1 . . . J0 . S0 *B0 P0 . R1 C1 T1 M1 . 23002.773592 secs N1 O1 . . . J0 . *U0 B0 P0 . R1 C1 T1 M1 . 23002.773582 secs N1 O1 . . . *S1 . U0 B0 P0 . R1 C1 T1 M1 . 23002.773604 secs N1 O1 . . . S1 . U0 B0 *. . R1 C1 T1 M1 . 23002.773615 secs N1 O1 . . . S1 . U0 B0 . . *K0 C1 T1 M1 . 23002.773631 secs N1 O1 . *M0 . S1 . U0 B0 . . K0 C1 T1 M1 . 23002.773624 secs N1 O1 . M0 . S1 . U0 *. . . K0 C1 T1 M1 . 23002.773644 secs N1 O1 . M0 . S1 . U0 . . . *R1 C1 T1 M1 . 23002.773662 secs N1 O1 . M0 . S1 . *. . . . R1 C1 T1 M1 . 23002.773648 secs N1 O1 . *. . S1 . . . . . R1 C1 T1 M1 . 23002.773680 secs N1 O1 . . . *L0 . . . . . R1 C1 T1 M1 . 23002.773717 secs *N0 O1 . . . L0 . . . . . R1 C1 T1 M1 . 23002.773709 secs *N1 O1 . . . L0 . . . . . R1 C1 T1 M1 . 23002.773747 secs Columns stand for individual CPUs, from CPU0 to CPU15, and the two-letter shortcuts stand for tasks that are running on a CPU. '*' denotes the CPU that had the event. A dot signals an idle CPU. New tasks are assigned new two-letter shortcuts - when they occur first they are printed. In the above example 'T1' stood for irqbalance: T1 => irqbalance:2089 Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-16 23:40:48 +08:00
{
const u32 next_pid = perf_evsel__intval(evsel, sample, "next_pid");
struct thread *sched_in;
struct thread_runtime *tr;
perf sched: Add 'perf sched map' scheduling event map printout This prints a textual context-switching outline of workload captured via perf sched record. For example, on a 16 CPU box it outputs: N1 O1 . . . S1 . . . B0 . *I0 C1 . M1 . 23002.773423 secs N1 O1 . *Q0 . S1 . . . B0 . I0 C1 . M1 . 23002.773423 secs N1 O1 . Q0 . S1 . . . B0 . *R1 C1 . M1 . 23002.773485 secs N1 O1 . Q0 . S1 . *S0 . B0 . R1 C1 . M1 . 23002.773478 secs *L0 O1 . Q0 . S1 . S0 . B0 . R1 C1 . M1 . 23002.773523 secs L0 O1 . *. . S1 . S0 . B0 . R1 C1 . M1 . 23002.773531 secs L0 O1 . . . S1 . S0 . B0 . R1 C1 *T1 M1 . 23002.773547 secs T1 => irqbalance:2089 L0 O1 . . . S1 . S0 . *P0 . R1 C1 T1 M1 . 23002.773549 secs *N1 O1 . . . S1 . S0 . P0 . R1 C1 T1 M1 . 23002.773566 secs N1 O1 . . . *J0 . S0 . P0 . R1 C1 T1 M1 . 23002.773571 secs N1 O1 . . . J0 . S0 *B0 P0 . R1 C1 T1 M1 . 23002.773592 secs N1 O1 . . . J0 . *U0 B0 P0 . R1 C1 T1 M1 . 23002.773582 secs N1 O1 . . . *S1 . U0 B0 P0 . R1 C1 T1 M1 . 23002.773604 secs N1 O1 . . . S1 . U0 B0 *. . R1 C1 T1 M1 . 23002.773615 secs N1 O1 . . . S1 . U0 B0 . . *K0 C1 T1 M1 . 23002.773631 secs N1 O1 . *M0 . S1 . U0 B0 . . K0 C1 T1 M1 . 23002.773624 secs N1 O1 . M0 . S1 . U0 *. . . K0 C1 T1 M1 . 23002.773644 secs N1 O1 . M0 . S1 . U0 . . . *R1 C1 T1 M1 . 23002.773662 secs N1 O1 . M0 . S1 . *. . . . R1 C1 T1 M1 . 23002.773648 secs N1 O1 . *. . S1 . . . . . R1 C1 T1 M1 . 23002.773680 secs N1 O1 . . . *L0 . . . . . R1 C1 T1 M1 . 23002.773717 secs *N0 O1 . . . L0 . . . . . R1 C1 T1 M1 . 23002.773709 secs *N1 O1 . . . L0 . . . . . R1 C1 T1 M1 . 23002.773747 secs Columns stand for individual CPUs, from CPU0 to CPU15, and the two-letter shortcuts stand for tasks that are running on a CPU. '*' denotes the CPU that had the event. A dot signals an idle CPU. New tasks are assigned new two-letter shortcuts - when they occur first they are printed. In the above example 'T1' stood for irqbalance: T1 => irqbalance:2089 Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-16 23:40:48 +08:00
int new_shortname;
u64 timestamp0, timestamp = sample->time;
perf sched: Add 'perf sched map' scheduling event map printout This prints a textual context-switching outline of workload captured via perf sched record. For example, on a 16 CPU box it outputs: N1 O1 . . . S1 . . . B0 . *I0 C1 . M1 . 23002.773423 secs N1 O1 . *Q0 . S1 . . . B0 . I0 C1 . M1 . 23002.773423 secs N1 O1 . Q0 . S1 . . . B0 . *R1 C1 . M1 . 23002.773485 secs N1 O1 . Q0 . S1 . *S0 . B0 . R1 C1 . M1 . 23002.773478 secs *L0 O1 . Q0 . S1 . S0 . B0 . R1 C1 . M1 . 23002.773523 secs L0 O1 . *. . S1 . S0 . B0 . R1 C1 . M1 . 23002.773531 secs L0 O1 . . . S1 . S0 . B0 . R1 C1 *T1 M1 . 23002.773547 secs T1 => irqbalance:2089 L0 O1 . . . S1 . S0 . *P0 . R1 C1 T1 M1 . 23002.773549 secs *N1 O1 . . . S1 . S0 . P0 . R1 C1 T1 M1 . 23002.773566 secs N1 O1 . . . *J0 . S0 . P0 . R1 C1 T1 M1 . 23002.773571 secs N1 O1 . . . J0 . S0 *B0 P0 . R1 C1 T1 M1 . 23002.773592 secs N1 O1 . . . J0 . *U0 B0 P0 . R1 C1 T1 M1 . 23002.773582 secs N1 O1 . . . *S1 . U0 B0 P0 . R1 C1 T1 M1 . 23002.773604 secs N1 O1 . . . S1 . U0 B0 *. . R1 C1 T1 M1 . 23002.773615 secs N1 O1 . . . S1 . U0 B0 . . *K0 C1 T1 M1 . 23002.773631 secs N1 O1 . *M0 . S1 . U0 B0 . . K0 C1 T1 M1 . 23002.773624 secs N1 O1 . M0 . S1 . U0 *. . . K0 C1 T1 M1 . 23002.773644 secs N1 O1 . M0 . S1 . U0 . . . *R1 C1 T1 M1 . 23002.773662 secs N1 O1 . M0 . S1 . *. . . . R1 C1 T1 M1 . 23002.773648 secs N1 O1 . *. . S1 . . . . . R1 C1 T1 M1 . 23002.773680 secs N1 O1 . . . *L0 . . . . . R1 C1 T1 M1 . 23002.773717 secs *N0 O1 . . . L0 . . . . . R1 C1 T1 M1 . 23002.773709 secs *N1 O1 . . . L0 . . . . . R1 C1 T1 M1 . 23002.773747 secs Columns stand for individual CPUs, from CPU0 to CPU15, and the two-letter shortcuts stand for tasks that are running on a CPU. '*' denotes the CPU that had the event. A dot signals an idle CPU. New tasks are assigned new two-letter shortcuts - when they occur first they are printed. In the above example 'T1' stood for irqbalance: T1 => irqbalance:2089 Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-16 23:40:48 +08:00
s64 delta;
int i, this_cpu = sample->cpu;
int cpus_nr;
bool new_cpu = false;
const char *color = PERF_COLOR_NORMAL;
char stimestamp[32];
perf sched: Add 'perf sched map' scheduling event map printout This prints a textual context-switching outline of workload captured via perf sched record. For example, on a 16 CPU box it outputs: N1 O1 . . . S1 . . . B0 . *I0 C1 . M1 . 23002.773423 secs N1 O1 . *Q0 . S1 . . . B0 . I0 C1 . M1 . 23002.773423 secs N1 O1 . Q0 . S1 . . . B0 . *R1 C1 . M1 . 23002.773485 secs N1 O1 . Q0 . S1 . *S0 . B0 . R1 C1 . M1 . 23002.773478 secs *L0 O1 . Q0 . S1 . S0 . B0 . R1 C1 . M1 . 23002.773523 secs L0 O1 . *. . S1 . S0 . B0 . R1 C1 . M1 . 23002.773531 secs L0 O1 . . . S1 . S0 . B0 . R1 C1 *T1 M1 . 23002.773547 secs T1 => irqbalance:2089 L0 O1 . . . S1 . S0 . *P0 . R1 C1 T1 M1 . 23002.773549 secs *N1 O1 . . . S1 . S0 . P0 . R1 C1 T1 M1 . 23002.773566 secs N1 O1 . . . *J0 . S0 . P0 . R1 C1 T1 M1 . 23002.773571 secs N1 O1 . . . J0 . S0 *B0 P0 . R1 C1 T1 M1 . 23002.773592 secs N1 O1 . . . J0 . *U0 B0 P0 . R1 C1 T1 M1 . 23002.773582 secs N1 O1 . . . *S1 . U0 B0 P0 . R1 C1 T1 M1 . 23002.773604 secs N1 O1 . . . S1 . U0 B0 *. . R1 C1 T1 M1 . 23002.773615 secs N1 O1 . . . S1 . U0 B0 . . *K0 C1 T1 M1 . 23002.773631 secs N1 O1 . *M0 . S1 . U0 B0 . . K0 C1 T1 M1 . 23002.773624 secs N1 O1 . M0 . S1 . U0 *. . . K0 C1 T1 M1 . 23002.773644 secs N1 O1 . M0 . S1 . U0 . . . *R1 C1 T1 M1 . 23002.773662 secs N1 O1 . M0 . S1 . *. . . . R1 C1 T1 M1 . 23002.773648 secs N1 O1 . *. . S1 . . . . . R1 C1 T1 M1 . 23002.773680 secs N1 O1 . . . *L0 . . . . . R1 C1 T1 M1 . 23002.773717 secs *N0 O1 . . . L0 . . . . . R1 C1 T1 M1 . 23002.773709 secs *N1 O1 . . . L0 . . . . . R1 C1 T1 M1 . 23002.773747 secs Columns stand for individual CPUs, from CPU0 to CPU15, and the two-letter shortcuts stand for tasks that are running on a CPU. '*' denotes the CPU that had the event. A dot signals an idle CPU. New tasks are assigned new two-letter shortcuts - when they occur first they are printed. In the above example 'T1' stood for irqbalance: T1 => irqbalance:2089 Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-16 23:40:48 +08:00
BUG_ON(this_cpu >= MAX_CPUS || this_cpu < 0);
if (this_cpu > sched->max_cpu)
sched->max_cpu = this_cpu;
perf sched: Add 'perf sched map' scheduling event map printout This prints a textual context-switching outline of workload captured via perf sched record. For example, on a 16 CPU box it outputs: N1 O1 . . . S1 . . . B0 . *I0 C1 . M1 . 23002.773423 secs N1 O1 . *Q0 . S1 . . . B0 . I0 C1 . M1 . 23002.773423 secs N1 O1 . Q0 . S1 . . . B0 . *R1 C1 . M1 . 23002.773485 secs N1 O1 . Q0 . S1 . *S0 . B0 . R1 C1 . M1 . 23002.773478 secs *L0 O1 . Q0 . S1 . S0 . B0 . R1 C1 . M1 . 23002.773523 secs L0 O1 . *. . S1 . S0 . B0 . R1 C1 . M1 . 23002.773531 secs L0 O1 . . . S1 . S0 . B0 . R1 C1 *T1 M1 . 23002.773547 secs T1 => irqbalance:2089 L0 O1 . . . S1 . S0 . *P0 . R1 C1 T1 M1 . 23002.773549 secs *N1 O1 . . . S1 . S0 . P0 . R1 C1 T1 M1 . 23002.773566 secs N1 O1 . . . *J0 . S0 . P0 . R1 C1 T1 M1 . 23002.773571 secs N1 O1 . . . J0 . S0 *B0 P0 . R1 C1 T1 M1 . 23002.773592 secs N1 O1 . . . J0 . *U0 B0 P0 . R1 C1 T1 M1 . 23002.773582 secs N1 O1 . . . *S1 . U0 B0 P0 . R1 C1 T1 M1 . 23002.773604 secs N1 O1 . . . S1 . U0 B0 *. . R1 C1 T1 M1 . 23002.773615 secs N1 O1 . . . S1 . U0 B0 . . *K0 C1 T1 M1 . 23002.773631 secs N1 O1 . *M0 . S1 . U0 B0 . . K0 C1 T1 M1 . 23002.773624 secs N1 O1 . M0 . S1 . U0 *. . . K0 C1 T1 M1 . 23002.773644 secs N1 O1 . M0 . S1 . U0 . . . *R1 C1 T1 M1 . 23002.773662 secs N1 O1 . M0 . S1 . *. . . . R1 C1 T1 M1 . 23002.773648 secs N1 O1 . *. . S1 . . . . . R1 C1 T1 M1 . 23002.773680 secs N1 O1 . . . *L0 . . . . . R1 C1 T1 M1 . 23002.773717 secs *N0 O1 . . . L0 . . . . . R1 C1 T1 M1 . 23002.773709 secs *N1 O1 . . . L0 . . . . . R1 C1 T1 M1 . 23002.773747 secs Columns stand for individual CPUs, from CPU0 to CPU15, and the two-letter shortcuts stand for tasks that are running on a CPU. '*' denotes the CPU that had the event. A dot signals an idle CPU. New tasks are assigned new two-letter shortcuts - when they occur first they are printed. In the above example 'T1' stood for irqbalance: T1 => irqbalance:2089 Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-16 23:40:48 +08:00
if (sched->map.comp) {
cpus_nr = bitmap_weight(sched->map.comp_cpus_mask, MAX_CPUS);
if (!test_and_set_bit(this_cpu, sched->map.comp_cpus_mask)) {
sched->map.comp_cpus[cpus_nr++] = this_cpu;
new_cpu = true;
}
} else
cpus_nr = sched->max_cpu;
timestamp0 = sched->cpu_last_switched[this_cpu];
sched->cpu_last_switched[this_cpu] = timestamp;
perf sched: Add 'perf sched map' scheduling event map printout This prints a textual context-switching outline of workload captured via perf sched record. For example, on a 16 CPU box it outputs: N1 O1 . . . S1 . . . B0 . *I0 C1 . M1 . 23002.773423 secs N1 O1 . *Q0 . S1 . . . B0 . I0 C1 . M1 . 23002.773423 secs N1 O1 . Q0 . S1 . . . B0 . *R1 C1 . M1 . 23002.773485 secs N1 O1 . Q0 . S1 . *S0 . B0 . R1 C1 . M1 . 23002.773478 secs *L0 O1 . Q0 . S1 . S0 . B0 . R1 C1 . M1 . 23002.773523 secs L0 O1 . *. . S1 . S0 . B0 . R1 C1 . M1 . 23002.773531 secs L0 O1 . . . S1 . S0 . B0 . R1 C1 *T1 M1 . 23002.773547 secs T1 => irqbalance:2089 L0 O1 . . . S1 . S0 . *P0 . R1 C1 T1 M1 . 23002.773549 secs *N1 O1 . . . S1 . S0 . P0 . R1 C1 T1 M1 . 23002.773566 secs N1 O1 . . . *J0 . S0 . P0 . R1 C1 T1 M1 . 23002.773571 secs N1 O1 . . . J0 . S0 *B0 P0 . R1 C1 T1 M1 . 23002.773592 secs N1 O1 . . . J0 . *U0 B0 P0 . R1 C1 T1 M1 . 23002.773582 secs N1 O1 . . . *S1 . U0 B0 P0 . R1 C1 T1 M1 . 23002.773604 secs N1 O1 . . . S1 . U0 B0 *. . R1 C1 T1 M1 . 23002.773615 secs N1 O1 . . . S1 . U0 B0 . . *K0 C1 T1 M1 . 23002.773631 secs N1 O1 . *M0 . S1 . U0 B0 . . K0 C1 T1 M1 . 23002.773624 secs N1 O1 . M0 . S1 . U0 *. . . K0 C1 T1 M1 . 23002.773644 secs N1 O1 . M0 . S1 . U0 . . . *R1 C1 T1 M1 . 23002.773662 secs N1 O1 . M0 . S1 . *. . . . R1 C1 T1 M1 . 23002.773648 secs N1 O1 . *. . S1 . . . . . R1 C1 T1 M1 . 23002.773680 secs N1 O1 . . . *L0 . . . . . R1 C1 T1 M1 . 23002.773717 secs *N0 O1 . . . L0 . . . . . R1 C1 T1 M1 . 23002.773709 secs *N1 O1 . . . L0 . . . . . R1 C1 T1 M1 . 23002.773747 secs Columns stand for individual CPUs, from CPU0 to CPU15, and the two-letter shortcuts stand for tasks that are running on a CPU. '*' denotes the CPU that had the event. A dot signals an idle CPU. New tasks are assigned new two-letter shortcuts - when they occur first they are printed. In the above example 'T1' stood for irqbalance: T1 => irqbalance:2089 Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-16 23:40:48 +08:00
if (timestamp0)
delta = timestamp - timestamp0;
else
delta = 0;
if (delta < 0) {
pr_err("hm, delta: %" PRIu64 " < 0 ?\n", delta);
return -1;
}
perf sched: Add 'perf sched map' scheduling event map printout This prints a textual context-switching outline of workload captured via perf sched record. For example, on a 16 CPU box it outputs: N1 O1 . . . S1 . . . B0 . *I0 C1 . M1 . 23002.773423 secs N1 O1 . *Q0 . S1 . . . B0 . I0 C1 . M1 . 23002.773423 secs N1 O1 . Q0 . S1 . . . B0 . *R1 C1 . M1 . 23002.773485 secs N1 O1 . Q0 . S1 . *S0 . B0 . R1 C1 . M1 . 23002.773478 secs *L0 O1 . Q0 . S1 . S0 . B0 . R1 C1 . M1 . 23002.773523 secs L0 O1 . *. . S1 . S0 . B0 . R1 C1 . M1 . 23002.773531 secs L0 O1 . . . S1 . S0 . B0 . R1 C1 *T1 M1 . 23002.773547 secs T1 => irqbalance:2089 L0 O1 . . . S1 . S0 . *P0 . R1 C1 T1 M1 . 23002.773549 secs *N1 O1 . . . S1 . S0 . P0 . R1 C1 T1 M1 . 23002.773566 secs N1 O1 . . . *J0 . S0 . P0 . R1 C1 T1 M1 . 23002.773571 secs N1 O1 . . . J0 . S0 *B0 P0 . R1 C1 T1 M1 . 23002.773592 secs N1 O1 . . . J0 . *U0 B0 P0 . R1 C1 T1 M1 . 23002.773582 secs N1 O1 . . . *S1 . U0 B0 P0 . R1 C1 T1 M1 . 23002.773604 secs N1 O1 . . . S1 . U0 B0 *. . R1 C1 T1 M1 . 23002.773615 secs N1 O1 . . . S1 . U0 B0 . . *K0 C1 T1 M1 . 23002.773631 secs N1 O1 . *M0 . S1 . U0 B0 . . K0 C1 T1 M1 . 23002.773624 secs N1 O1 . M0 . S1 . U0 *. . . K0 C1 T1 M1 . 23002.773644 secs N1 O1 . M0 . S1 . U0 . . . *R1 C1 T1 M1 . 23002.773662 secs N1 O1 . M0 . S1 . *. . . . R1 C1 T1 M1 . 23002.773648 secs N1 O1 . *. . S1 . . . . . R1 C1 T1 M1 . 23002.773680 secs N1 O1 . . . *L0 . . . . . R1 C1 T1 M1 . 23002.773717 secs *N0 O1 . . . L0 . . . . . R1 C1 T1 M1 . 23002.773709 secs *N1 O1 . . . L0 . . . . . R1 C1 T1 M1 . 23002.773747 secs Columns stand for individual CPUs, from CPU0 to CPU15, and the two-letter shortcuts stand for tasks that are running on a CPU. '*' denotes the CPU that had the event. A dot signals an idle CPU. New tasks are assigned new two-letter shortcuts - when they occur first they are printed. In the above example 'T1' stood for irqbalance: T1 => irqbalance:2089 Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-16 23:40:48 +08:00
sched_in = map__findnew_thread(sched, machine, -1, next_pid);
perf machine: Protect the machine->threads with a rwlock In addition to using refcounts for the struct thread lifetime management, we need to protect access to machine->threads from concurrent access. That happens in 'perf top', where a thread processes events, inserting and deleting entries from that rb_tree while another thread decays hist_entries, that end up dropping references and ultimately deleting threads from the rb_tree and releasing its resources when no further hist_entry (or other data structures, like in 'perf sched') references it. So the rule is the same for refcounts + protected trees in the kernel, get the tree lock, find object, bump the refcount, drop the tree lock, return, use object, drop the refcount if no more use of it is needed, keep it if storing it in some other data structure, drop when releasing that data structure. I.e. pair "t = machine__find(new)_thread()" with a "thread__put(t)", and "perf_event__preprocess_sample(&al)" with "addr_location__put(&al)". The addr_location__put() one is because as we return references to several data structures, we may end up adding more reference counting for the other data structures and then we'll drop it at addr_location__put() time. Acked-by: David Ahern <dsahern@gmail.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Borislav Petkov <bp@suse.de> Cc: Don Zickus <dzickus@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-bs9rt4n0jw3hi9f3zxyy3xln@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-04-07 07:43:22 +08:00
if (sched_in == NULL)
return -1;
perf sched: Add 'perf sched map' scheduling event map printout This prints a textual context-switching outline of workload captured via perf sched record. For example, on a 16 CPU box it outputs: N1 O1 . . . S1 . . . B0 . *I0 C1 . M1 . 23002.773423 secs N1 O1 . *Q0 . S1 . . . B0 . I0 C1 . M1 . 23002.773423 secs N1 O1 . Q0 . S1 . . . B0 . *R1 C1 . M1 . 23002.773485 secs N1 O1 . Q0 . S1 . *S0 . B0 . R1 C1 . M1 . 23002.773478 secs *L0 O1 . Q0 . S1 . S0 . B0 . R1 C1 . M1 . 23002.773523 secs L0 O1 . *. . S1 . S0 . B0 . R1 C1 . M1 . 23002.773531 secs L0 O1 . . . S1 . S0 . B0 . R1 C1 *T1 M1 . 23002.773547 secs T1 => irqbalance:2089 L0 O1 . . . S1 . S0 . *P0 . R1 C1 T1 M1 . 23002.773549 secs *N1 O1 . . . S1 . S0 . P0 . R1 C1 T1 M1 . 23002.773566 secs N1 O1 . . . *J0 . S0 . P0 . R1 C1 T1 M1 . 23002.773571 secs N1 O1 . . . J0 . S0 *B0 P0 . R1 C1 T1 M1 . 23002.773592 secs N1 O1 . . . J0 . *U0 B0 P0 . R1 C1 T1 M1 . 23002.773582 secs N1 O1 . . . *S1 . U0 B0 P0 . R1 C1 T1 M1 . 23002.773604 secs N1 O1 . . . S1 . U0 B0 *. . R1 C1 T1 M1 . 23002.773615 secs N1 O1 . . . S1 . U0 B0 . . *K0 C1 T1 M1 . 23002.773631 secs N1 O1 . *M0 . S1 . U0 B0 . . K0 C1 T1 M1 . 23002.773624 secs N1 O1 . M0 . S1 . U0 *. . . K0 C1 T1 M1 . 23002.773644 secs N1 O1 . M0 . S1 . U0 . . . *R1 C1 T1 M1 . 23002.773662 secs N1 O1 . M0 . S1 . *. . . . R1 C1 T1 M1 . 23002.773648 secs N1 O1 . *. . S1 . . . . . R1 C1 T1 M1 . 23002.773680 secs N1 O1 . . . *L0 . . . . . R1 C1 T1 M1 . 23002.773717 secs *N0 O1 . . . L0 . . . . . R1 C1 T1 M1 . 23002.773709 secs *N1 O1 . . . L0 . . . . . R1 C1 T1 M1 . 23002.773747 secs Columns stand for individual CPUs, from CPU0 to CPU15, and the two-letter shortcuts stand for tasks that are running on a CPU. '*' denotes the CPU that had the event. A dot signals an idle CPU. New tasks are assigned new two-letter shortcuts - when they occur first they are printed. In the above example 'T1' stood for irqbalance: T1 => irqbalance:2089 Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-16 23:40:48 +08:00
tr = thread__get_runtime(sched_in);
if (tr == NULL) {
thread__put(sched_in);
return -1;
}
perf machine: Protect the machine->threads with a rwlock In addition to using refcounts for the struct thread lifetime management, we need to protect access to machine->threads from concurrent access. That happens in 'perf top', where a thread processes events, inserting and deleting entries from that rb_tree while another thread decays hist_entries, that end up dropping references and ultimately deleting threads from the rb_tree and releasing its resources when no further hist_entry (or other data structures, like in 'perf sched') references it. So the rule is the same for refcounts + protected trees in the kernel, get the tree lock, find object, bump the refcount, drop the tree lock, return, use object, drop the refcount if no more use of it is needed, keep it if storing it in some other data structure, drop when releasing that data structure. I.e. pair "t = machine__find(new)_thread()" with a "thread__put(t)", and "perf_event__preprocess_sample(&al)" with "addr_location__put(&al)". The addr_location__put() one is because as we return references to several data structures, we may end up adding more reference counting for the other data structures and then we'll drop it at addr_location__put() time. Acked-by: David Ahern <dsahern@gmail.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Borislav Petkov <bp@suse.de> Cc: Don Zickus <dzickus@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-bs9rt4n0jw3hi9f3zxyy3xln@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-04-07 07:43:22 +08:00
sched->curr_thread[this_cpu] = thread__get(sched_in);
perf sched: Add 'perf sched map' scheduling event map printout This prints a textual context-switching outline of workload captured via perf sched record. For example, on a 16 CPU box it outputs: N1 O1 . . . S1 . . . B0 . *I0 C1 . M1 . 23002.773423 secs N1 O1 . *Q0 . S1 . . . B0 . I0 C1 . M1 . 23002.773423 secs N1 O1 . Q0 . S1 . . . B0 . *R1 C1 . M1 . 23002.773485 secs N1 O1 . Q0 . S1 . *S0 . B0 . R1 C1 . M1 . 23002.773478 secs *L0 O1 . Q0 . S1 . S0 . B0 . R1 C1 . M1 . 23002.773523 secs L0 O1 . *. . S1 . S0 . B0 . R1 C1 . M1 . 23002.773531 secs L0 O1 . . . S1 . S0 . B0 . R1 C1 *T1 M1 . 23002.773547 secs T1 => irqbalance:2089 L0 O1 . . . S1 . S0 . *P0 . R1 C1 T1 M1 . 23002.773549 secs *N1 O1 . . . S1 . S0 . P0 . R1 C1 T1 M1 . 23002.773566 secs N1 O1 . . . *J0 . S0 . P0 . R1 C1 T1 M1 . 23002.773571 secs N1 O1 . . . J0 . S0 *B0 P0 . R1 C1 T1 M1 . 23002.773592 secs N1 O1 . . . J0 . *U0 B0 P0 . R1 C1 T1 M1 . 23002.773582 secs N1 O1 . . . *S1 . U0 B0 P0 . R1 C1 T1 M1 . 23002.773604 secs N1 O1 . . . S1 . U0 B0 *. . R1 C1 T1 M1 . 23002.773615 secs N1 O1 . . . S1 . U0 B0 . . *K0 C1 T1 M1 . 23002.773631 secs N1 O1 . *M0 . S1 . U0 B0 . . K0 C1 T1 M1 . 23002.773624 secs N1 O1 . M0 . S1 . U0 *. . . K0 C1 T1 M1 . 23002.773644 secs N1 O1 . M0 . S1 . U0 . . . *R1 C1 T1 M1 . 23002.773662 secs N1 O1 . M0 . S1 . *. . . . R1 C1 T1 M1 . 23002.773648 secs N1 O1 . *. . S1 . . . . . R1 C1 T1 M1 . 23002.773680 secs N1 O1 . . . *L0 . . . . . R1 C1 T1 M1 . 23002.773717 secs *N0 O1 . . . L0 . . . . . R1 C1 T1 M1 . 23002.773709 secs *N1 O1 . . . L0 . . . . . R1 C1 T1 M1 . 23002.773747 secs Columns stand for individual CPUs, from CPU0 to CPU15, and the two-letter shortcuts stand for tasks that are running on a CPU. '*' denotes the CPU that had the event. A dot signals an idle CPU. New tasks are assigned new two-letter shortcuts - when they occur first they are printed. In the above example 'T1' stood for irqbalance: T1 => irqbalance:2089 Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-16 23:40:48 +08:00
printf(" ");
new_shortname = 0;
if (!tr->shortname[0]) {
if (!strcmp(thread__comm_str(sched_in), "swapper")) {
/*
* Don't allocate a letter-number for swapper:0
* as a shortname. Instead, we use '.' for it.
*/
tr->shortname[0] = '.';
tr->shortname[1] = ' ';
perf sched: Add 'perf sched map' scheduling event map printout This prints a textual context-switching outline of workload captured via perf sched record. For example, on a 16 CPU box it outputs: N1 O1 . . . S1 . . . B0 . *I0 C1 . M1 . 23002.773423 secs N1 O1 . *Q0 . S1 . . . B0 . I0 C1 . M1 . 23002.773423 secs N1 O1 . Q0 . S1 . . . B0 . *R1 C1 . M1 . 23002.773485 secs N1 O1 . Q0 . S1 . *S0 . B0 . R1 C1 . M1 . 23002.773478 secs *L0 O1 . Q0 . S1 . S0 . B0 . R1 C1 . M1 . 23002.773523 secs L0 O1 . *. . S1 . S0 . B0 . R1 C1 . M1 . 23002.773531 secs L0 O1 . . . S1 . S0 . B0 . R1 C1 *T1 M1 . 23002.773547 secs T1 => irqbalance:2089 L0 O1 . . . S1 . S0 . *P0 . R1 C1 T1 M1 . 23002.773549 secs *N1 O1 . . . S1 . S0 . P0 . R1 C1 T1 M1 . 23002.773566 secs N1 O1 . . . *J0 . S0 . P0 . R1 C1 T1 M1 . 23002.773571 secs N1 O1 . . . J0 . S0 *B0 P0 . R1 C1 T1 M1 . 23002.773592 secs N1 O1 . . . J0 . *U0 B0 P0 . R1 C1 T1 M1 . 23002.773582 secs N1 O1 . . . *S1 . U0 B0 P0 . R1 C1 T1 M1 . 23002.773604 secs N1 O1 . . . S1 . U0 B0 *. . R1 C1 T1 M1 . 23002.773615 secs N1 O1 . . . S1 . U0 B0 . . *K0 C1 T1 M1 . 23002.773631 secs N1 O1 . *M0 . S1 . U0 B0 . . K0 C1 T1 M1 . 23002.773624 secs N1 O1 . M0 . S1 . U0 *. . . K0 C1 T1 M1 . 23002.773644 secs N1 O1 . M0 . S1 . U0 . . . *R1 C1 T1 M1 . 23002.773662 secs N1 O1 . M0 . S1 . *. . . . R1 C1 T1 M1 . 23002.773648 secs N1 O1 . *. . S1 . . . . . R1 C1 T1 M1 . 23002.773680 secs N1 O1 . . . *L0 . . . . . R1 C1 T1 M1 . 23002.773717 secs *N0 O1 . . . L0 . . . . . R1 C1 T1 M1 . 23002.773709 secs *N1 O1 . . . L0 . . . . . R1 C1 T1 M1 . 23002.773747 secs Columns stand for individual CPUs, from CPU0 to CPU15, and the two-letter shortcuts stand for tasks that are running on a CPU. '*' denotes the CPU that had the event. A dot signals an idle CPU. New tasks are assigned new two-letter shortcuts - when they occur first they are printed. In the above example 'T1' stood for irqbalance: T1 => irqbalance:2089 Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-16 23:40:48 +08:00
} else {
tr->shortname[0] = sched->next_shortname1;
tr->shortname[1] = sched->next_shortname2;
if (sched->next_shortname1 < 'Z') {
sched->next_shortname1++;
perf sched: Add 'perf sched map' scheduling event map printout This prints a textual context-switching outline of workload captured via perf sched record. For example, on a 16 CPU box it outputs: N1 O1 . . . S1 . . . B0 . *I0 C1 . M1 . 23002.773423 secs N1 O1 . *Q0 . S1 . . . B0 . I0 C1 . M1 . 23002.773423 secs N1 O1 . Q0 . S1 . . . B0 . *R1 C1 . M1 . 23002.773485 secs N1 O1 . Q0 . S1 . *S0 . B0 . R1 C1 . M1 . 23002.773478 secs *L0 O1 . Q0 . S1 . S0 . B0 . R1 C1 . M1 . 23002.773523 secs L0 O1 . *. . S1 . S0 . B0 . R1 C1 . M1 . 23002.773531 secs L0 O1 . . . S1 . S0 . B0 . R1 C1 *T1 M1 . 23002.773547 secs T1 => irqbalance:2089 L0 O1 . . . S1 . S0 . *P0 . R1 C1 T1 M1 . 23002.773549 secs *N1 O1 . . . S1 . S0 . P0 . R1 C1 T1 M1 . 23002.773566 secs N1 O1 . . . *J0 . S0 . P0 . R1 C1 T1 M1 . 23002.773571 secs N1 O1 . . . J0 . S0 *B0 P0 . R1 C1 T1 M1 . 23002.773592 secs N1 O1 . . . J0 . *U0 B0 P0 . R1 C1 T1 M1 . 23002.773582 secs N1 O1 . . . *S1 . U0 B0 P0 . R1 C1 T1 M1 . 23002.773604 secs N1 O1 . . . S1 . U0 B0 *. . R1 C1 T1 M1 . 23002.773615 secs N1 O1 . . . S1 . U0 B0 . . *K0 C1 T1 M1 . 23002.773631 secs N1 O1 . *M0 . S1 . U0 B0 . . K0 C1 T1 M1 . 23002.773624 secs N1 O1 . M0 . S1 . U0 *. . . K0 C1 T1 M1 . 23002.773644 secs N1 O1 . M0 . S1 . U0 . . . *R1 C1 T1 M1 . 23002.773662 secs N1 O1 . M0 . S1 . *. . . . R1 C1 T1 M1 . 23002.773648 secs N1 O1 . *. . S1 . . . . . R1 C1 T1 M1 . 23002.773680 secs N1 O1 . . . *L0 . . . . . R1 C1 T1 M1 . 23002.773717 secs *N0 O1 . . . L0 . . . . . R1 C1 T1 M1 . 23002.773709 secs *N1 O1 . . . L0 . . . . . R1 C1 T1 M1 . 23002.773747 secs Columns stand for individual CPUs, from CPU0 to CPU15, and the two-letter shortcuts stand for tasks that are running on a CPU. '*' denotes the CPU that had the event. A dot signals an idle CPU. New tasks are assigned new two-letter shortcuts - when they occur first they are printed. In the above example 'T1' stood for irqbalance: T1 => irqbalance:2089 Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-16 23:40:48 +08:00
} else {
sched->next_shortname1 = 'A';
if (sched->next_shortname2 < '9')
sched->next_shortname2++;
else
sched->next_shortname2 = '0';
perf sched: Add 'perf sched map' scheduling event map printout This prints a textual context-switching outline of workload captured via perf sched record. For example, on a 16 CPU box it outputs: N1 O1 . . . S1 . . . B0 . *I0 C1 . M1 . 23002.773423 secs N1 O1 . *Q0 . S1 . . . B0 . I0 C1 . M1 . 23002.773423 secs N1 O1 . Q0 . S1 . . . B0 . *R1 C1 . M1 . 23002.773485 secs N1 O1 . Q0 . S1 . *S0 . B0 . R1 C1 . M1 . 23002.773478 secs *L0 O1 . Q0 . S1 . S0 . B0 . R1 C1 . M1 . 23002.773523 secs L0 O1 . *. . S1 . S0 . B0 . R1 C1 . M1 . 23002.773531 secs L0 O1 . . . S1 . S0 . B0 . R1 C1 *T1 M1 . 23002.773547 secs T1 => irqbalance:2089 L0 O1 . . . S1 . S0 . *P0 . R1 C1 T1 M1 . 23002.773549 secs *N1 O1 . . . S1 . S0 . P0 . R1 C1 T1 M1 . 23002.773566 secs N1 O1 . . . *J0 . S0 . P0 . R1 C1 T1 M1 . 23002.773571 secs N1 O1 . . . J0 . S0 *B0 P0 . R1 C1 T1 M1 . 23002.773592 secs N1 O1 . . . J0 . *U0 B0 P0 . R1 C1 T1 M1 . 23002.773582 secs N1 O1 . . . *S1 . U0 B0 P0 . R1 C1 T1 M1 . 23002.773604 secs N1 O1 . . . S1 . U0 B0 *. . R1 C1 T1 M1 . 23002.773615 secs N1 O1 . . . S1 . U0 B0 . . *K0 C1 T1 M1 . 23002.773631 secs N1 O1 . *M0 . S1 . U0 B0 . . K0 C1 T1 M1 . 23002.773624 secs N1 O1 . M0 . S1 . U0 *. . . K0 C1 T1 M1 . 23002.773644 secs N1 O1 . M0 . S1 . U0 . . . *R1 C1 T1 M1 . 23002.773662 secs N1 O1 . M0 . S1 . *. . . . R1 C1 T1 M1 . 23002.773648 secs N1 O1 . *. . S1 . . . . . R1 C1 T1 M1 . 23002.773680 secs N1 O1 . . . *L0 . . . . . R1 C1 T1 M1 . 23002.773717 secs *N0 O1 . . . L0 . . . . . R1 C1 T1 M1 . 23002.773709 secs *N1 O1 . . . L0 . . . . . R1 C1 T1 M1 . 23002.773747 secs Columns stand for individual CPUs, from CPU0 to CPU15, and the two-letter shortcuts stand for tasks that are running on a CPU. '*' denotes the CPU that had the event. A dot signals an idle CPU. New tasks are assigned new two-letter shortcuts - when they occur first they are printed. In the above example 'T1' stood for irqbalance: T1 => irqbalance:2089 Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-16 23:40:48 +08:00
}
}
new_shortname = 1;
}
for (i = 0; i < cpus_nr; i++) {
int cpu = sched->map.comp ? sched->map.comp_cpus[i] : i;
struct thread *curr_thread = sched->curr_thread[cpu];
struct thread_runtime *curr_tr;
const char *pid_color = color;
const char *cpu_color = color;
if (curr_thread && thread__has_color(curr_thread))
pid_color = COLOR_PIDS;
if (sched->map.cpus && !cpu_map__has(sched->map.cpus, cpu))
continue;
if (sched->map.color_cpus && cpu_map__has(sched->map.color_cpus, cpu))
cpu_color = COLOR_CPUS;
perf sched: Add 'perf sched map' scheduling event map printout This prints a textual context-switching outline of workload captured via perf sched record. For example, on a 16 CPU box it outputs: N1 O1 . . . S1 . . . B0 . *I0 C1 . M1 . 23002.773423 secs N1 O1 . *Q0 . S1 . . . B0 . I0 C1 . M1 . 23002.773423 secs N1 O1 . Q0 . S1 . . . B0 . *R1 C1 . M1 . 23002.773485 secs N1 O1 . Q0 . S1 . *S0 . B0 . R1 C1 . M1 . 23002.773478 secs *L0 O1 . Q0 . S1 . S0 . B0 . R1 C1 . M1 . 23002.773523 secs L0 O1 . *. . S1 . S0 . B0 . R1 C1 . M1 . 23002.773531 secs L0 O1 . . . S1 . S0 . B0 . R1 C1 *T1 M1 . 23002.773547 secs T1 => irqbalance:2089 L0 O1 . . . S1 . S0 . *P0 . R1 C1 T1 M1 . 23002.773549 secs *N1 O1 . . . S1 . S0 . P0 . R1 C1 T1 M1 . 23002.773566 secs N1 O1 . . . *J0 . S0 . P0 . R1 C1 T1 M1 . 23002.773571 secs N1 O1 . . . J0 . S0 *B0 P0 . R1 C1 T1 M1 . 23002.773592 secs N1 O1 . . . J0 . *U0 B0 P0 . R1 C1 T1 M1 . 23002.773582 secs N1 O1 . . . *S1 . U0 B0 P0 . R1 C1 T1 M1 . 23002.773604 secs N1 O1 . . . S1 . U0 B0 *. . R1 C1 T1 M1 . 23002.773615 secs N1 O1 . . . S1 . U0 B0 . . *K0 C1 T1 M1 . 23002.773631 secs N1 O1 . *M0 . S1 . U0 B0 . . K0 C1 T1 M1 . 23002.773624 secs N1 O1 . M0 . S1 . U0 *. . . K0 C1 T1 M1 . 23002.773644 secs N1 O1 . M0 . S1 . U0 . . . *R1 C1 T1 M1 . 23002.773662 secs N1 O1 . M0 . S1 . *. . . . R1 C1 T1 M1 . 23002.773648 secs N1 O1 . *. . S1 . . . . . R1 C1 T1 M1 . 23002.773680 secs N1 O1 . . . *L0 . . . . . R1 C1 T1 M1 . 23002.773717 secs *N0 O1 . . . L0 . . . . . R1 C1 T1 M1 . 23002.773709 secs *N1 O1 . . . L0 . . . . . R1 C1 T1 M1 . 23002.773747 secs Columns stand for individual CPUs, from CPU0 to CPU15, and the two-letter shortcuts stand for tasks that are running on a CPU. '*' denotes the CPU that had the event. A dot signals an idle CPU. New tasks are assigned new two-letter shortcuts - when they occur first they are printed. In the above example 'T1' stood for irqbalance: T1 => irqbalance:2089 Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-16 23:40:48 +08:00
if (cpu != this_cpu)
color_fprintf(stdout, color, " ");
perf sched: Add 'perf sched map' scheduling event map printout This prints a textual context-switching outline of workload captured via perf sched record. For example, on a 16 CPU box it outputs: N1 O1 . . . S1 . . . B0 . *I0 C1 . M1 . 23002.773423 secs N1 O1 . *Q0 . S1 . . . B0 . I0 C1 . M1 . 23002.773423 secs N1 O1 . Q0 . S1 . . . B0 . *R1 C1 . M1 . 23002.773485 secs N1 O1 . Q0 . S1 . *S0 . B0 . R1 C1 . M1 . 23002.773478 secs *L0 O1 . Q0 . S1 . S0 . B0 . R1 C1 . M1 . 23002.773523 secs L0 O1 . *. . S1 . S0 . B0 . R1 C1 . M1 . 23002.773531 secs L0 O1 . . . S1 . S0 . B0 . R1 C1 *T1 M1 . 23002.773547 secs T1 => irqbalance:2089 L0 O1 . . . S1 . S0 . *P0 . R1 C1 T1 M1 . 23002.773549 secs *N1 O1 . . . S1 . S0 . P0 . R1 C1 T1 M1 . 23002.773566 secs N1 O1 . . . *J0 . S0 . P0 . R1 C1 T1 M1 . 23002.773571 secs N1 O1 . . . J0 . S0 *B0 P0 . R1 C1 T1 M1 . 23002.773592 secs N1 O1 . . . J0 . *U0 B0 P0 . R1 C1 T1 M1 . 23002.773582 secs N1 O1 . . . *S1 . U0 B0 P0 . R1 C1 T1 M1 . 23002.773604 secs N1 O1 . . . S1 . U0 B0 *. . R1 C1 T1 M1 . 23002.773615 secs N1 O1 . . . S1 . U0 B0 . . *K0 C1 T1 M1 . 23002.773631 secs N1 O1 . *M0 . S1 . U0 B0 . . K0 C1 T1 M1 . 23002.773624 secs N1 O1 . M0 . S1 . U0 *. . . K0 C1 T1 M1 . 23002.773644 secs N1 O1 . M0 . S1 . U0 . . . *R1 C1 T1 M1 . 23002.773662 secs N1 O1 . M0 . S1 . *. . . . R1 C1 T1 M1 . 23002.773648 secs N1 O1 . *. . S1 . . . . . R1 C1 T1 M1 . 23002.773680 secs N1 O1 . . . *L0 . . . . . R1 C1 T1 M1 . 23002.773717 secs *N0 O1 . . . L0 . . . . . R1 C1 T1 M1 . 23002.773709 secs *N1 O1 . . . L0 . . . . . R1 C1 T1 M1 . 23002.773747 secs Columns stand for individual CPUs, from CPU0 to CPU15, and the two-letter shortcuts stand for tasks that are running on a CPU. '*' denotes the CPU that had the event. A dot signals an idle CPU. New tasks are assigned new two-letter shortcuts - when they occur first they are printed. In the above example 'T1' stood for irqbalance: T1 => irqbalance:2089 Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-16 23:40:48 +08:00
else
color_fprintf(stdout, cpu_color, "*");
perf sched: Add 'perf sched map' scheduling event map printout This prints a textual context-switching outline of workload captured via perf sched record. For example, on a 16 CPU box it outputs: N1 O1 . . . S1 . . . B0 . *I0 C1 . M1 . 23002.773423 secs N1 O1 . *Q0 . S1 . . . B0 . I0 C1 . M1 . 23002.773423 secs N1 O1 . Q0 . S1 . . . B0 . *R1 C1 . M1 . 23002.773485 secs N1 O1 . Q0 . S1 . *S0 . B0 . R1 C1 . M1 . 23002.773478 secs *L0 O1 . Q0 . S1 . S0 . B0 . R1 C1 . M1 . 23002.773523 secs L0 O1 . *. . S1 . S0 . B0 . R1 C1 . M1 . 23002.773531 secs L0 O1 . . . S1 . S0 . B0 . R1 C1 *T1 M1 . 23002.773547 secs T1 => irqbalance:2089 L0 O1 . . . S1 . S0 . *P0 . R1 C1 T1 M1 . 23002.773549 secs *N1 O1 . . . S1 . S0 . P0 . R1 C1 T1 M1 . 23002.773566 secs N1 O1 . . . *J0 . S0 . P0 . R1 C1 T1 M1 . 23002.773571 secs N1 O1 . . . J0 . S0 *B0 P0 . R1 C1 T1 M1 . 23002.773592 secs N1 O1 . . . J0 . *U0 B0 P0 . R1 C1 T1 M1 . 23002.773582 secs N1 O1 . . . *S1 . U0 B0 P0 . R1 C1 T1 M1 . 23002.773604 secs N1 O1 . . . S1 . U0 B0 *. . R1 C1 T1 M1 . 23002.773615 secs N1 O1 . . . S1 . U0 B0 . . *K0 C1 T1 M1 . 23002.773631 secs N1 O1 . *M0 . S1 . U0 B0 . . K0 C1 T1 M1 . 23002.773624 secs N1 O1 . M0 . S1 . U0 *. . . K0 C1 T1 M1 . 23002.773644 secs N1 O1 . M0 . S1 . U0 . . . *R1 C1 T1 M1 . 23002.773662 secs N1 O1 . M0 . S1 . *. . . . R1 C1 T1 M1 . 23002.773648 secs N1 O1 . *. . S1 . . . . . R1 C1 T1 M1 . 23002.773680 secs N1 O1 . . . *L0 . . . . . R1 C1 T1 M1 . 23002.773717 secs *N0 O1 . . . L0 . . . . . R1 C1 T1 M1 . 23002.773709 secs *N1 O1 . . . L0 . . . . . R1 C1 T1 M1 . 23002.773747 secs Columns stand for individual CPUs, from CPU0 to CPU15, and the two-letter shortcuts stand for tasks that are running on a CPU. '*' denotes the CPU that had the event. A dot signals an idle CPU. New tasks are assigned new two-letter shortcuts - when they occur first they are printed. In the above example 'T1' stood for irqbalance: T1 => irqbalance:2089 Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-16 23:40:48 +08:00
if (sched->curr_thread[cpu]) {
curr_tr = thread__get_runtime(sched->curr_thread[cpu]);
if (curr_tr == NULL) {
thread__put(sched_in);
return -1;
}
color_fprintf(stdout, pid_color, "%2s ", curr_tr->shortname);
} else
color_fprintf(stdout, color, " ");
perf sched: Add 'perf sched map' scheduling event map printout This prints a textual context-switching outline of workload captured via perf sched record. For example, on a 16 CPU box it outputs: N1 O1 . . . S1 . . . B0 . *I0 C1 . M1 . 23002.773423 secs N1 O1 . *Q0 . S1 . . . B0 . I0 C1 . M1 . 23002.773423 secs N1 O1 . Q0 . S1 . . . B0 . *R1 C1 . M1 . 23002.773485 secs N1 O1 . Q0 . S1 . *S0 . B0 . R1 C1 . M1 . 23002.773478 secs *L0 O1 . Q0 . S1 . S0 . B0 . R1 C1 . M1 . 23002.773523 secs L0 O1 . *. . S1 . S0 . B0 . R1 C1 . M1 . 23002.773531 secs L0 O1 . . . S1 . S0 . B0 . R1 C1 *T1 M1 . 23002.773547 secs T1 => irqbalance:2089 L0 O1 . . . S1 . S0 . *P0 . R1 C1 T1 M1 . 23002.773549 secs *N1 O1 . . . S1 . S0 . P0 . R1 C1 T1 M1 . 23002.773566 secs N1 O1 . . . *J0 . S0 . P0 . R1 C1 T1 M1 . 23002.773571 secs N1 O1 . . . J0 . S0 *B0 P0 . R1 C1 T1 M1 . 23002.773592 secs N1 O1 . . . J0 . *U0 B0 P0 . R1 C1 T1 M1 . 23002.773582 secs N1 O1 . . . *S1 . U0 B0 P0 . R1 C1 T1 M1 . 23002.773604 secs N1 O1 . . . S1 . U0 B0 *. . R1 C1 T1 M1 . 23002.773615 secs N1 O1 . . . S1 . U0 B0 . . *K0 C1 T1 M1 . 23002.773631 secs N1 O1 . *M0 . S1 . U0 B0 . . K0 C1 T1 M1 . 23002.773624 secs N1 O1 . M0 . S1 . U0 *. . . K0 C1 T1 M1 . 23002.773644 secs N1 O1 . M0 . S1 . U0 . . . *R1 C1 T1 M1 . 23002.773662 secs N1 O1 . M0 . S1 . *. . . . R1 C1 T1 M1 . 23002.773648 secs N1 O1 . *. . S1 . . . . . R1 C1 T1 M1 . 23002.773680 secs N1 O1 . . . *L0 . . . . . R1 C1 T1 M1 . 23002.773717 secs *N0 O1 . . . L0 . . . . . R1 C1 T1 M1 . 23002.773709 secs *N1 O1 . . . L0 . . . . . R1 C1 T1 M1 . 23002.773747 secs Columns stand for individual CPUs, from CPU0 to CPU15, and the two-letter shortcuts stand for tasks that are running on a CPU. '*' denotes the CPU that had the event. A dot signals an idle CPU. New tasks are assigned new two-letter shortcuts - when they occur first they are printed. In the above example 'T1' stood for irqbalance: T1 => irqbalance:2089 Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-16 23:40:48 +08:00
}
if (sched->map.cpus && !cpu_map__has(sched->map.cpus, this_cpu))
goto out;
timestamp__scnprintf_usec(timestamp, stimestamp, sizeof(stimestamp));
color_fprintf(stdout, color, " %12s secs ", stimestamp);
if (new_shortname || tr->comm_changed || (verbose > 0 && sched_in->tid)) {
const char *pid_color = color;
if (thread__has_color(sched_in))
pid_color = COLOR_PIDS;
color_fprintf(stdout, pid_color, "%s => %s:%d",
tr->shortname, thread__comm_str(sched_in), sched_in->tid);
tr->comm_changed = false;
perf sched: Add 'perf sched map' scheduling event map printout This prints a textual context-switching outline of workload captured via perf sched record. For example, on a 16 CPU box it outputs: N1 O1 . . . S1 . . . B0 . *I0 C1 . M1 . 23002.773423 secs N1 O1 . *Q0 . S1 . . . B0 . I0 C1 . M1 . 23002.773423 secs N1 O1 . Q0 . S1 . . . B0 . *R1 C1 . M1 . 23002.773485 secs N1 O1 . Q0 . S1 . *S0 . B0 . R1 C1 . M1 . 23002.773478 secs *L0 O1 . Q0 . S1 . S0 . B0 . R1 C1 . M1 . 23002.773523 secs L0 O1 . *. . S1 . S0 . B0 . R1 C1 . M1 . 23002.773531 secs L0 O1 . . . S1 . S0 . B0 . R1 C1 *T1 M1 . 23002.773547 secs T1 => irqbalance:2089 L0 O1 . . . S1 . S0 . *P0 . R1 C1 T1 M1 . 23002.773549 secs *N1 O1 . . . S1 . S0 . P0 . R1 C1 T1 M1 . 23002.773566 secs N1 O1 . . . *J0 . S0 . P0 . R1 C1 T1 M1 . 23002.773571 secs N1 O1 . . . J0 . S0 *B0 P0 . R1 C1 T1 M1 . 23002.773592 secs N1 O1 . . . J0 . *U0 B0 P0 . R1 C1 T1 M1 . 23002.773582 secs N1 O1 . . . *S1 . U0 B0 P0 . R1 C1 T1 M1 . 23002.773604 secs N1 O1 . . . S1 . U0 B0 *. . R1 C1 T1 M1 . 23002.773615 secs N1 O1 . . . S1 . U0 B0 . . *K0 C1 T1 M1 . 23002.773631 secs N1 O1 . *M0 . S1 . U0 B0 . . K0 C1 T1 M1 . 23002.773624 secs N1 O1 . M0 . S1 . U0 *. . . K0 C1 T1 M1 . 23002.773644 secs N1 O1 . M0 . S1 . U0 . . . *R1 C1 T1 M1 . 23002.773662 secs N1 O1 . M0 . S1 . *. . . . R1 C1 T1 M1 . 23002.773648 secs N1 O1 . *. . S1 . . . . . R1 C1 T1 M1 . 23002.773680 secs N1 O1 . . . *L0 . . . . . R1 C1 T1 M1 . 23002.773717 secs *N0 O1 . . . L0 . . . . . R1 C1 T1 M1 . 23002.773709 secs *N1 O1 . . . L0 . . . . . R1 C1 T1 M1 . 23002.773747 secs Columns stand for individual CPUs, from CPU0 to CPU15, and the two-letter shortcuts stand for tasks that are running on a CPU. '*' denotes the CPU that had the event. A dot signals an idle CPU. New tasks are assigned new two-letter shortcuts - when they occur first they are printed. In the above example 'T1' stood for irqbalance: T1 => irqbalance:2089 Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-16 23:40:48 +08:00
}
if (sched->map.comp && new_cpu)
color_fprintf(stdout, color, " (CPU %d)", this_cpu);
out:
color_fprintf(stdout, color, "\n");
perf machine: Protect the machine->threads with a rwlock In addition to using refcounts for the struct thread lifetime management, we need to protect access to machine->threads from concurrent access. That happens in 'perf top', where a thread processes events, inserting and deleting entries from that rb_tree while another thread decays hist_entries, that end up dropping references and ultimately deleting threads from the rb_tree and releasing its resources when no further hist_entry (or other data structures, like in 'perf sched') references it. So the rule is the same for refcounts + protected trees in the kernel, get the tree lock, find object, bump the refcount, drop the tree lock, return, use object, drop the refcount if no more use of it is needed, keep it if storing it in some other data structure, drop when releasing that data structure. I.e. pair "t = machine__find(new)_thread()" with a "thread__put(t)", and "perf_event__preprocess_sample(&al)" with "addr_location__put(&al)". The addr_location__put() one is because as we return references to several data structures, we may end up adding more reference counting for the other data structures and then we'll drop it at addr_location__put() time. Acked-by: David Ahern <dsahern@gmail.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Borislav Petkov <bp@suse.de> Cc: Don Zickus <dzickus@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-bs9rt4n0jw3hi9f3zxyy3xln@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-04-07 07:43:22 +08:00
thread__put(sched_in);
return 0;
perf sched: Add 'perf sched map' scheduling event map printout This prints a textual context-switching outline of workload captured via perf sched record. For example, on a 16 CPU box it outputs: N1 O1 . . . S1 . . . B0 . *I0 C1 . M1 . 23002.773423 secs N1 O1 . *Q0 . S1 . . . B0 . I0 C1 . M1 . 23002.773423 secs N1 O1 . Q0 . S1 . . . B0 . *R1 C1 . M1 . 23002.773485 secs N1 O1 . Q0 . S1 . *S0 . B0 . R1 C1 . M1 . 23002.773478 secs *L0 O1 . Q0 . S1 . S0 . B0 . R1 C1 . M1 . 23002.773523 secs L0 O1 . *. . S1 . S0 . B0 . R1 C1 . M1 . 23002.773531 secs L0 O1 . . . S1 . S0 . B0 . R1 C1 *T1 M1 . 23002.773547 secs T1 => irqbalance:2089 L0 O1 . . . S1 . S0 . *P0 . R1 C1 T1 M1 . 23002.773549 secs *N1 O1 . . . S1 . S0 . P0 . R1 C1 T1 M1 . 23002.773566 secs N1 O1 . . . *J0 . S0 . P0 . R1 C1 T1 M1 . 23002.773571 secs N1 O1 . . . J0 . S0 *B0 P0 . R1 C1 T1 M1 . 23002.773592 secs N1 O1 . . . J0 . *U0 B0 P0 . R1 C1 T1 M1 . 23002.773582 secs N1 O1 . . . *S1 . U0 B0 P0 . R1 C1 T1 M1 . 23002.773604 secs N1 O1 . . . S1 . U0 B0 *. . R1 C1 T1 M1 . 23002.773615 secs N1 O1 . . . S1 . U0 B0 . . *K0 C1 T1 M1 . 23002.773631 secs N1 O1 . *M0 . S1 . U0 B0 . . K0 C1 T1 M1 . 23002.773624 secs N1 O1 . M0 . S1 . U0 *. . . K0 C1 T1 M1 . 23002.773644 secs N1 O1 . M0 . S1 . U0 . . . *R1 C1 T1 M1 . 23002.773662 secs N1 O1 . M0 . S1 . *. . . . R1 C1 T1 M1 . 23002.773648 secs N1 O1 . *. . S1 . . . . . R1 C1 T1 M1 . 23002.773680 secs N1 O1 . . . *L0 . . . . . R1 C1 T1 M1 . 23002.773717 secs *N0 O1 . . . L0 . . . . . R1 C1 T1 M1 . 23002.773709 secs *N1 O1 . . . L0 . . . . . R1 C1 T1 M1 . 23002.773747 secs Columns stand for individual CPUs, from CPU0 to CPU15, and the two-letter shortcuts stand for tasks that are running on a CPU. '*' denotes the CPU that had the event. A dot signals an idle CPU. New tasks are assigned new two-letter shortcuts - when they occur first they are printed. In the above example 'T1' stood for irqbalance: T1 => irqbalance:2089 Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-16 23:40:48 +08:00
}
static int process_sched_switch_event(struct perf_tool *tool,
struct evsel *evsel,
perf tools: Use __maybe_used for unused variables perf defines both __used and __unused variables to use for marking unused variables. The variable __used is defined to __attribute__((__unused__)), which contradicts the kernel definition to __attribute__((__used__)) for new gcc versions. On Android, __used is also defined in system headers and this leads to warnings like: warning: '__used__' attribute ignored __unused is not defined in the kernel and is not a standard definition. If __unused is included everywhere instead of __used, this leads to conflicts with glibc headers, since glibc has a variables with this name in its headers. The best approach is to use __maybe_unused, the definition used in the kernel for __attribute__((unused)). In this way there is only one definition in perf sources (instead of 2 definitions that point to the same thing: __used and __unused) and it works on both Linux and Android. This patch simply replaces all instances of __used and __unused with __maybe_unused. Signed-off-by: Irina Tirdea <irina.tirdea@intel.com> Acked-by: Pekka Enberg <penberg@kernel.org> Cc: David Ahern <dsahern@gmail.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Namhyung Kim <namhyung.kim@lge.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Steven Rostedt <rostedt@goodmis.org> Link: http://lkml.kernel.org/r/1347315303-29906-7-git-send-email-irina.tirdea@intel.com [ committer note: fixed up conflict with a116e05 in builtin-sched.c ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-09-11 06:15:03 +08:00
struct perf_sample *sample,
struct machine *machine)
{
struct perf_sched *sched = container_of(tool, struct perf_sched, tool);
int this_cpu = sample->cpu, err = 0;
perf sched: Use perf_evsel__{int,str}val This patch also stops reading the common fields, as they were not being used except for one ->common_pid case that was replaced by sample->tid, i.e. the info is already in the perf_sample struct. Also it only fills the _event structures when there is a handler. [root@sandy ~]# perf sched record sleep 30s [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 8.585 MB perf.data (~375063 samples) ] Before: [root@sandy ~]# perf stat -r 10 perf sched lat > /dev/null Performance counter stats for 'perf sched lat' (10 runs): 129.117838 task-clock # 0.994 CPUs utilized ( +- 0.28% ) 14 context-switches # 0.111 K/sec ( +- 2.10% ) 0 cpu-migrations # 0.002 K/sec ( +- 66.67% ) 7,654 page-faults # 0.059 M/sec ( +- 0.67% ) 438,121,661 cycles # 3.393 GHz ( +- 0.06% ) [83.06%] 150,808,605 stalled-cycles-frontend # 34.42% frontend cycles idle ( +- 0.14% ) [83.10%] 80,748,941 stalled-cycles-backend # 18.43% backend cycles idle ( +- 0.64% ) [66.73%] 758,605,879 instructions # 1.73 insns per cycle # 0.20 stalled cycles per insn ( +- 0.08% ) [83.54%] 162,164,321 branches # 1255.940 M/sec ( +- 0.10% ) [83.70%] 1,609,903 branch-misses # 0.99% of all branches ( +- 0.08% ) [83.62%] 0.129949153 seconds time elapsed ( +- 0.28% ) After: [root@sandy ~]# perf stat -r 10 perf sched lat > /dev/null Performance counter stats for 'perf sched lat' (10 runs): 103.592215 task-clock # 0.993 CPUs utilized ( +- 0.33% ) 12 context-switches # 0.114 K/sec ( +- 3.29% ) 0 cpu-migrations # 0.000 K/sec 7,605 page-faults # 0.073 M/sec ( +- 0.00% ) 345,796,112 cycles # 3.338 GHz ( +- 0.07% ) [82.90%] 106,876,796 stalled-cycles-frontend # 30.91% frontend cycles idle ( +- 0.38% ) [83.23%] 62,060,877 stalled-cycles-backend # 17.95% backend cycles idle ( +- 0.80% ) [67.14%] 628,246,586 instructions # 1.82 insns per cycle # 0.17 stalled cycles per insn ( +- 0.04% ) [83.64%] 134,962,057 branches # 1302.820 M/sec ( +- 0.10% ) [83.64%] 1,233,037 branch-misses # 0.91% of all branches ( +- 0.29% ) [83.41%] 0.104333272 seconds time elapsed ( +- 0.33% ) [root@sandy ~]# Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Namhyung Kim <namhyung@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-weu9t63zkrfrazkn0gxj48xy@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-09-12 06:29:17 +08:00
u32 prev_pid = perf_evsel__intval(evsel, sample, "prev_pid"),
next_pid = perf_evsel__intval(evsel, sample, "next_pid");
if (sched->curr_pid[this_cpu] != (u32)-1) {
/*
* Are we trying to switch away a PID that is
* not current?
*/
perf sched: Use perf_evsel__{int,str}val This patch also stops reading the common fields, as they were not being used except for one ->common_pid case that was replaced by sample->tid, i.e. the info is already in the perf_sample struct. Also it only fills the _event structures when there is a handler. [root@sandy ~]# perf sched record sleep 30s [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 8.585 MB perf.data (~375063 samples) ] Before: [root@sandy ~]# perf stat -r 10 perf sched lat > /dev/null Performance counter stats for 'perf sched lat' (10 runs): 129.117838 task-clock # 0.994 CPUs utilized ( +- 0.28% ) 14 context-switches # 0.111 K/sec ( +- 2.10% ) 0 cpu-migrations # 0.002 K/sec ( +- 66.67% ) 7,654 page-faults # 0.059 M/sec ( +- 0.67% ) 438,121,661 cycles # 3.393 GHz ( +- 0.06% ) [83.06%] 150,808,605 stalled-cycles-frontend # 34.42% frontend cycles idle ( +- 0.14% ) [83.10%] 80,748,941 stalled-cycles-backend # 18.43% backend cycles idle ( +- 0.64% ) [66.73%] 758,605,879 instructions # 1.73 insns per cycle # 0.20 stalled cycles per insn ( +- 0.08% ) [83.54%] 162,164,321 branches # 1255.940 M/sec ( +- 0.10% ) [83.70%] 1,609,903 branch-misses # 0.99% of all branches ( +- 0.08% ) [83.62%] 0.129949153 seconds time elapsed ( +- 0.28% ) After: [root@sandy ~]# perf stat -r 10 perf sched lat > /dev/null Performance counter stats for 'perf sched lat' (10 runs): 103.592215 task-clock # 0.993 CPUs utilized ( +- 0.33% ) 12 context-switches # 0.114 K/sec ( +- 3.29% ) 0 cpu-migrations # 0.000 K/sec 7,605 page-faults # 0.073 M/sec ( +- 0.00% ) 345,796,112 cycles # 3.338 GHz ( +- 0.07% ) [82.90%] 106,876,796 stalled-cycles-frontend # 30.91% frontend cycles idle ( +- 0.38% ) [83.23%] 62,060,877 stalled-cycles-backend # 17.95% backend cycles idle ( +- 0.80% ) [67.14%] 628,246,586 instructions # 1.82 insns per cycle # 0.17 stalled cycles per insn ( +- 0.04% ) [83.64%] 134,962,057 branches # 1302.820 M/sec ( +- 0.10% ) [83.64%] 1,233,037 branch-misses # 0.91% of all branches ( +- 0.29% ) [83.41%] 0.104333272 seconds time elapsed ( +- 0.33% ) [root@sandy ~]# Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Namhyung Kim <namhyung@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-weu9t63zkrfrazkn0gxj48xy@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-09-12 06:29:17 +08:00
if (sched->curr_pid[this_cpu] != prev_pid)
sched->nr_context_switch_bugs++;
}
perf sched: Don't read all tracepoint variables in advance Do it just at the actual consumer of these fields, that way we avoid needless lookups: [root@sandy ~]# perf sched record sleep 30s [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 8.585 MB perf.data (~375063 samples) ] Before: [root@sandy ~]# perf stat -r 10 perf sched lat > /dev/null Performance counter stats for 'perf sched lat' (10 runs): 103.592215 task-clock # 0.993 CPUs utilized ( +- 0.33% ) 12 context-switches # 0.114 K/sec ( +- 3.29% ) 0 cpu-migrations # 0.000 K/sec 7,605 page-faults # 0.073 M/sec ( +- 0.00% ) 345,796,112 cycles # 3.338 GHz ( +- 0.07% ) [82.90%] 106,876,796 stalled-cycles-frontend # 30.91% frontend cycles idle ( +- 0.38% ) [83.23%] 62,060,877 stalled-cycles-backend # 17.95% backend cycles idle ( +- 0.80% ) [67.14%] 628,246,586 instructions # 1.82 insns per cycle # 0.17 stalled cycles per insn ( +- 0.04% ) [83.64%] 134,962,057 branches # 1302.820 M/sec ( +- 0.10% ) [83.64%] 1,233,037 branch-misses # 0.91% of all branches ( +- 0.29% ) [83.41%] 0.104333272 seconds time elapsed ( +- 0.33% ) [root@sandy ~]# perf stat -r 10 perf sched lat > /dev/null Performance counter stats for 'perf sched lat' (10 runs): 98.848272 task-clock # 0.993 CPUs utilized ( +- 0.48% ) 11 context-switches # 0.112 K/sec ( +- 2.83% ) 0 cpu-migrations # 0.003 K/sec ( +- 50.92% ) 7,604 page-faults # 0.077 M/sec ( +- 0.00% ) 332,216,085 cycles # 3.361 GHz ( +- 0.14% ) [82.87%] 100,623,710 stalled-cycles-frontend # 30.29% frontend cycles idle ( +- 0.53% ) [82.95%] 58,788,692 stalled-cycles-backend # 17.70% backend cycles idle ( +- 0.59% ) [67.15%] 609,402,433 instructions # 1.83 insns per cycle # 0.17 stalled cycles per insn ( +- 0.04% ) [83.76%] 131,277,138 branches # 1328.067 M/sec ( +- 0.06% ) [83.77%] 1,117,871 branch-misses # 0.85% of all branches ( +- 0.32% ) [83.51%] 0.099580430 seconds time elapsed ( +- 0.48% ) [root@sandy ~]# Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Namhyung Kim <namhyung@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-kracdpw8wqlr0xjh75uk8g11@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-09-12 06:29:17 +08:00
if (sched->tp_handler->switch_event)
err = sched->tp_handler->switch_event(sched, evsel, sample, machine);
perf sched: Use perf_evsel__{int,str}val This patch also stops reading the common fields, as they were not being used except for one ->common_pid case that was replaced by sample->tid, i.e. the info is already in the perf_sample struct. Also it only fills the _event structures when there is a handler. [root@sandy ~]# perf sched record sleep 30s [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 8.585 MB perf.data (~375063 samples) ] Before: [root@sandy ~]# perf stat -r 10 perf sched lat > /dev/null Performance counter stats for 'perf sched lat' (10 runs): 129.117838 task-clock # 0.994 CPUs utilized ( +- 0.28% ) 14 context-switches # 0.111 K/sec ( +- 2.10% ) 0 cpu-migrations # 0.002 K/sec ( +- 66.67% ) 7,654 page-faults # 0.059 M/sec ( +- 0.67% ) 438,121,661 cycles # 3.393 GHz ( +- 0.06% ) [83.06%] 150,808,605 stalled-cycles-frontend # 34.42% frontend cycles idle ( +- 0.14% ) [83.10%] 80,748,941 stalled-cycles-backend # 18.43% backend cycles idle ( +- 0.64% ) [66.73%] 758,605,879 instructions # 1.73 insns per cycle # 0.20 stalled cycles per insn ( +- 0.08% ) [83.54%] 162,164,321 branches # 1255.940 M/sec ( +- 0.10% ) [83.70%] 1,609,903 branch-misses # 0.99% of all branches ( +- 0.08% ) [83.62%] 0.129949153 seconds time elapsed ( +- 0.28% ) After: [root@sandy ~]# perf stat -r 10 perf sched lat > /dev/null Performance counter stats for 'perf sched lat' (10 runs): 103.592215 task-clock # 0.993 CPUs utilized ( +- 0.33% ) 12 context-switches # 0.114 K/sec ( +- 3.29% ) 0 cpu-migrations # 0.000 K/sec 7,605 page-faults # 0.073 M/sec ( +- 0.00% ) 345,796,112 cycles # 3.338 GHz ( +- 0.07% ) [82.90%] 106,876,796 stalled-cycles-frontend # 30.91% frontend cycles idle ( +- 0.38% ) [83.23%] 62,060,877 stalled-cycles-backend # 17.95% backend cycles idle ( +- 0.80% ) [67.14%] 628,246,586 instructions # 1.82 insns per cycle # 0.17 stalled cycles per insn ( +- 0.04% ) [83.64%] 134,962,057 branches # 1302.820 M/sec ( +- 0.10% ) [83.64%] 1,233,037 branch-misses # 0.91% of all branches ( +- 0.29% ) [83.41%] 0.104333272 seconds time elapsed ( +- 0.33% ) [root@sandy ~]# Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Namhyung Kim <namhyung@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-weu9t63zkrfrazkn0gxj48xy@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-09-12 06:29:17 +08:00
sched->curr_pid[this_cpu] = next_pid;
return err;
}
static int process_sched_runtime_event(struct perf_tool *tool,
struct evsel *evsel,
perf tools: Use __maybe_used for unused variables perf defines both __used and __unused variables to use for marking unused variables. The variable __used is defined to __attribute__((__unused__)), which contradicts the kernel definition to __attribute__((__used__)) for new gcc versions. On Android, __used is also defined in system headers and this leads to warnings like: warning: '__used__' attribute ignored __unused is not defined in the kernel and is not a standard definition. If __unused is included everywhere instead of __used, this leads to conflicts with glibc headers, since glibc has a variables with this name in its headers. The best approach is to use __maybe_unused, the definition used in the kernel for __attribute__((unused)). In this way there is only one definition in perf sources (instead of 2 definitions that point to the same thing: __used and __unused) and it works on both Linux and Android. This patch simply replaces all instances of __used and __unused with __maybe_unused. Signed-off-by: Irina Tirdea <irina.tirdea@intel.com> Acked-by: Pekka Enberg <penberg@kernel.org> Cc: David Ahern <dsahern@gmail.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Namhyung Kim <namhyung.kim@lge.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Steven Rostedt <rostedt@goodmis.org> Link: http://lkml.kernel.org/r/1347315303-29906-7-git-send-email-irina.tirdea@intel.com [ committer note: fixed up conflict with a116e05 in builtin-sched.c ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-09-11 06:15:03 +08:00
struct perf_sample *sample,
struct machine *machine)
perf sched: Add support for sched:sched_stat_runtime events This allows more precise 'perf sched latency' output: --------------------------------------------------------------------------------------- Task | Runtime ms | Switches | Average delay ms | Maximum delay ms | --------------------------------------------------------------------------------------- ksoftirqd/0-4 | 0.010 ms | 2 | avg: 2.476 ms | max: 2.977 ms | perf-12328 | 15.844 ms | 66 | avg: 1.118 ms | max: 9.979 ms | bdi-default-235 | 0.009 ms | 1 | avg: 0.998 ms | max: 0.998 ms | events/1-8 | 0.020 ms | 2 | avg: 0.998 ms | max: 0.998 ms | events/0-7 | 0.018 ms | 2 | avg: 0.992 ms | max: 0.996 ms | sleep-12329 | 0.742 ms | 3 | avg: 0.906 ms | max: 2.289 ms | sshd-12122 | 0.163 ms | 2 | avg: 0.283 ms | max: 0.562 ms | loop-getpid-lon-12322 | 1023.636 ms | 69 | avg: 0.208 ms | max: 5.996 ms | loop-getpid-lon-12321 | 1038.638 ms | 5 | avg: 0.073 ms | max: 0.171 ms | migration/1-5 | 0.000 ms | 1 | avg: 0.006 ms | max: 0.006 ms | --------------------------------------------------------------------------------------- TOTAL: | 2079.078 ms | 153 | ------------------------------------------------- Also, streamline the code a bit more, add asserts for various state machine failures (they should be debugged if they occur) and fix a few odd ends. Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-15 02:04:48 +08:00
{
struct perf_sched *sched = container_of(tool, struct perf_sched, tool);
perf sched: Add support for sched:sched_stat_runtime events This allows more precise 'perf sched latency' output: --------------------------------------------------------------------------------------- Task | Runtime ms | Switches | Average delay ms | Maximum delay ms | --------------------------------------------------------------------------------------- ksoftirqd/0-4 | 0.010 ms | 2 | avg: 2.476 ms | max: 2.977 ms | perf-12328 | 15.844 ms | 66 | avg: 1.118 ms | max: 9.979 ms | bdi-default-235 | 0.009 ms | 1 | avg: 0.998 ms | max: 0.998 ms | events/1-8 | 0.020 ms | 2 | avg: 0.998 ms | max: 0.998 ms | events/0-7 | 0.018 ms | 2 | avg: 0.992 ms | max: 0.996 ms | sleep-12329 | 0.742 ms | 3 | avg: 0.906 ms | max: 2.289 ms | sshd-12122 | 0.163 ms | 2 | avg: 0.283 ms | max: 0.562 ms | loop-getpid-lon-12322 | 1023.636 ms | 69 | avg: 0.208 ms | max: 5.996 ms | loop-getpid-lon-12321 | 1038.638 ms | 5 | avg: 0.073 ms | max: 0.171 ms | migration/1-5 | 0.000 ms | 1 | avg: 0.006 ms | max: 0.006 ms | --------------------------------------------------------------------------------------- TOTAL: | 2079.078 ms | 153 | ------------------------------------------------- Also, streamline the code a bit more, add asserts for various state machine failures (they should be debugged if they occur) and fix a few odd ends. Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-15 02:04:48 +08:00
perf sched: Don't read all tracepoint variables in advance Do it just at the actual consumer of these fields, that way we avoid needless lookups: [root@sandy ~]# perf sched record sleep 30s [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 8.585 MB perf.data (~375063 samples) ] Before: [root@sandy ~]# perf stat -r 10 perf sched lat > /dev/null Performance counter stats for 'perf sched lat' (10 runs): 103.592215 task-clock # 0.993 CPUs utilized ( +- 0.33% ) 12 context-switches # 0.114 K/sec ( +- 3.29% ) 0 cpu-migrations # 0.000 K/sec 7,605 page-faults # 0.073 M/sec ( +- 0.00% ) 345,796,112 cycles # 3.338 GHz ( +- 0.07% ) [82.90%] 106,876,796 stalled-cycles-frontend # 30.91% frontend cycles idle ( +- 0.38% ) [83.23%] 62,060,877 stalled-cycles-backend # 17.95% backend cycles idle ( +- 0.80% ) [67.14%] 628,246,586 instructions # 1.82 insns per cycle # 0.17 stalled cycles per insn ( +- 0.04% ) [83.64%] 134,962,057 branches # 1302.820 M/sec ( +- 0.10% ) [83.64%] 1,233,037 branch-misses # 0.91% of all branches ( +- 0.29% ) [83.41%] 0.104333272 seconds time elapsed ( +- 0.33% ) [root@sandy ~]# perf stat -r 10 perf sched lat > /dev/null Performance counter stats for 'perf sched lat' (10 runs): 98.848272 task-clock # 0.993 CPUs utilized ( +- 0.48% ) 11 context-switches # 0.112 K/sec ( +- 2.83% ) 0 cpu-migrations # 0.003 K/sec ( +- 50.92% ) 7,604 page-faults # 0.077 M/sec ( +- 0.00% ) 332,216,085 cycles # 3.361 GHz ( +- 0.14% ) [82.87%] 100,623,710 stalled-cycles-frontend # 30.29% frontend cycles idle ( +- 0.53% ) [82.95%] 58,788,692 stalled-cycles-backend # 17.70% backend cycles idle ( +- 0.59% ) [67.15%] 609,402,433 instructions # 1.83 insns per cycle # 0.17 stalled cycles per insn ( +- 0.04% ) [83.76%] 131,277,138 branches # 1328.067 M/sec ( +- 0.06% ) [83.77%] 1,117,871 branch-misses # 0.85% of all branches ( +- 0.32% ) [83.51%] 0.099580430 seconds time elapsed ( +- 0.48% ) [root@sandy ~]# Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Namhyung Kim <namhyung@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-kracdpw8wqlr0xjh75uk8g11@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-09-12 06:29:17 +08:00
if (sched->tp_handler->runtime_event)
return sched->tp_handler->runtime_event(sched, evsel, sample, machine);
perf sched: Use perf_evsel__{int,str}val This patch also stops reading the common fields, as they were not being used except for one ->common_pid case that was replaced by sample->tid, i.e. the info is already in the perf_sample struct. Also it only fills the _event structures when there is a handler. [root@sandy ~]# perf sched record sleep 30s [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 8.585 MB perf.data (~375063 samples) ] Before: [root@sandy ~]# perf stat -r 10 perf sched lat > /dev/null Performance counter stats for 'perf sched lat' (10 runs): 129.117838 task-clock # 0.994 CPUs utilized ( +- 0.28% ) 14 context-switches # 0.111 K/sec ( +- 2.10% ) 0 cpu-migrations # 0.002 K/sec ( +- 66.67% ) 7,654 page-faults # 0.059 M/sec ( +- 0.67% ) 438,121,661 cycles # 3.393 GHz ( +- 0.06% ) [83.06%] 150,808,605 stalled-cycles-frontend # 34.42% frontend cycles idle ( +- 0.14% ) [83.10%] 80,748,941 stalled-cycles-backend # 18.43% backend cycles idle ( +- 0.64% ) [66.73%] 758,605,879 instructions # 1.73 insns per cycle # 0.20 stalled cycles per insn ( +- 0.08% ) [83.54%] 162,164,321 branches # 1255.940 M/sec ( +- 0.10% ) [83.70%] 1,609,903 branch-misses # 0.99% of all branches ( +- 0.08% ) [83.62%] 0.129949153 seconds time elapsed ( +- 0.28% ) After: [root@sandy ~]# perf stat -r 10 perf sched lat > /dev/null Performance counter stats for 'perf sched lat' (10 runs): 103.592215 task-clock # 0.993 CPUs utilized ( +- 0.33% ) 12 context-switches # 0.114 K/sec ( +- 3.29% ) 0 cpu-migrations # 0.000 K/sec 7,605 page-faults # 0.073 M/sec ( +- 0.00% ) 345,796,112 cycles # 3.338 GHz ( +- 0.07% ) [82.90%] 106,876,796 stalled-cycles-frontend # 30.91% frontend cycles idle ( +- 0.38% ) [83.23%] 62,060,877 stalled-cycles-backend # 17.95% backend cycles idle ( +- 0.80% ) [67.14%] 628,246,586 instructions # 1.82 insns per cycle # 0.17 stalled cycles per insn ( +- 0.04% ) [83.64%] 134,962,057 branches # 1302.820 M/sec ( +- 0.10% ) [83.64%] 1,233,037 branch-misses # 0.91% of all branches ( +- 0.29% ) [83.41%] 0.104333272 seconds time elapsed ( +- 0.33% ) [root@sandy ~]# Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Namhyung Kim <namhyung@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-weu9t63zkrfrazkn0gxj48xy@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-09-12 06:29:17 +08:00
return 0;
perf sched: Add support for sched:sched_stat_runtime events This allows more precise 'perf sched latency' output: --------------------------------------------------------------------------------------- Task | Runtime ms | Switches | Average delay ms | Maximum delay ms | --------------------------------------------------------------------------------------- ksoftirqd/0-4 | 0.010 ms | 2 | avg: 2.476 ms | max: 2.977 ms | perf-12328 | 15.844 ms | 66 | avg: 1.118 ms | max: 9.979 ms | bdi-default-235 | 0.009 ms | 1 | avg: 0.998 ms | max: 0.998 ms | events/1-8 | 0.020 ms | 2 | avg: 0.998 ms | max: 0.998 ms | events/0-7 | 0.018 ms | 2 | avg: 0.992 ms | max: 0.996 ms | sleep-12329 | 0.742 ms | 3 | avg: 0.906 ms | max: 2.289 ms | sshd-12122 | 0.163 ms | 2 | avg: 0.283 ms | max: 0.562 ms | loop-getpid-lon-12322 | 1023.636 ms | 69 | avg: 0.208 ms | max: 5.996 ms | loop-getpid-lon-12321 | 1038.638 ms | 5 | avg: 0.073 ms | max: 0.171 ms | migration/1-5 | 0.000 ms | 1 | avg: 0.006 ms | max: 0.006 ms | --------------------------------------------------------------------------------------- TOTAL: | 2079.078 ms | 153 | ------------------------------------------------- Also, streamline the code a bit more, add asserts for various state machine failures (they should be debugged if they occur) and fix a few odd ends. Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-15 02:04:48 +08:00
}
static int perf_sched__process_fork_event(struct perf_tool *tool,
union perf_event *event,
struct perf_sample *sample,
struct machine *machine)
perf sched: Implement the scheduling workload replay engine Integrate the schedbench.c bits with the raw trace events that we get from the perf machinery, and activate the workload replayer/simulator. Example of a captured 'make -j' workload: $ perf sched run measurement overhead: 90 nsecs sleep measurement overhead: 2724743 nsecs the run test took 1000081 nsecs the sleep test took 2981111 nsecs version = 0.5 ... nr_run_events: 70 nr_sleep_events: 66 nr_wakeup_events: 9 target-less wakeups: 71 multi-target wakeups: 47 run events optimized: 139 task 0 ( perf: 6607), nr_events: 2 task 1 ( perf: 6608), nr_events: 6 task 2 ( : 0), nr_events: 1 task 3 ( make: 6609), nr_events: 5 task 4 ( sh: 6610), nr_events: 4 task 5 ( make: 6611), nr_events: 6 task 6 ( sh: 6612), nr_events: 4 task 7 ( make: 6613), nr_events: 5 task 8 ( migration/11: 25), nr_events: 1 task 9 ( migration/13: 29), nr_events: 1 task 10 ( migration/15: 33), nr_events: 1 task 11 ( migration/9: 21), nr_events: 1 task 12 ( sh: 6614), nr_events: 4 task 13 ( make: 6615), nr_events: 5 task 14 ( sh: 6616), nr_events: 4 task 15 ( make: 6617), nr_events: 7 task 16 ( migration/3: 9), nr_events: 1 task 17 ( migration/5: 13), nr_events: 1 task 18 ( migration/7: 17), nr_events: 1 task 19 ( migration/1: 5), nr_events: 1 task 20 ( sh: 6618), nr_events: 4 task 21 ( make: 6619), nr_events: 5 task 22 ( sh: 6620), nr_events: 4 task 23 ( make: 6621), nr_events: 10 task 24 ( sh: 6623), nr_events: 3 task 25 ( gcc: 6624), nr_events: 4 task 26 ( gcc: 6625), nr_events: 4 task 27 ( gcc: 6626), nr_events: 5 task 28 ( collect2: 6627), nr_events: 5 task 29 ( sh: 6622), nr_events: 1 task 30 ( make: 6628), nr_events: 7 task 31 ( sh: 6630), nr_events: 4 task 32 ( gcc: 6631), nr_events: 4 task 33 ( sh: 6629), nr_events: 1 task 34 ( gcc: 6632), nr_events: 4 task 35 ( gcc: 6633), nr_events: 4 task 36 ( collect2: 6634), nr_events: 4 task 37 ( make: 6635), nr_events: 8 task 38 ( sh: 6637), nr_events: 4 task 39 ( sh: 6636), nr_events: 1 task 40 ( gcc: 6638), nr_events: 4 task 41 ( gcc: 6639), nr_events: 4 task 42 ( gcc: 6640), nr_events: 4 task 43 ( collect2: 6641), nr_events: 4 task 44 ( make: 6642), nr_events: 6 task 45 ( sh: 6643), nr_events: 5 task 46 ( sh: 6644), nr_events: 3 task 47 ( sh: 6645), nr_events: 4 task 48 ( make: 6646), nr_events: 6 task 49 ( sh: 6647), nr_events: 3 task 50 ( make: 6648), nr_events: 5 task 51 ( sh: 6649), nr_events: 5 task 52 ( sh: 6650), nr_events: 6 task 53 ( make: 6651), nr_events: 4 task 54 ( make: 6652), nr_events: 5 task 55 ( make: 6653), nr_events: 4 task 56 ( make: 6654), nr_events: 4 task 57 ( make: 6655), nr_events: 5 task 58 ( sh: 6656), nr_events: 4 task 59 ( gcc: 6657), nr_events: 9 task 60 ( ksoftirqd/3: 10), nr_events: 1 task 61 ( gcc: 6658), nr_events: 4 task 62 ( make: 6659), nr_events: 5 task 63 ( sh: 6660), nr_events: 3 task 64 ( gcc: 6661), nr_events: 5 task 65 ( collect2: 6662), nr_events: 4 ------------------------------------------------------------ #1 : 256.745, ravg: 256.74, cpu: 0.00 / 0.00 #2 : 439.372, ravg: 275.01, cpu: 0.00 / 0.00 #3 : 411.971, ravg: 288.70, cpu: 0.00 / 0.00 #4 : 385.500, ravg: 298.38, cpu: 0.00 / 0.00 #5 : 366.526, ravg: 305.20, cpu: 0.00 / 0.00 #6 : 381.281, ravg: 312.81, cpu: 0.00 / 0.00 #7 : 410.756, ravg: 322.60, cpu: 0.00 / 0.00 #8 : 368.009, ravg: 327.14, cpu: 0.00 / 0.00 #9 : 408.098, ravg: 335.24, cpu: 0.00 / 0.00 #10 : 368.582, ravg: 338.57, cpu: 0.00 / 0.00 I.e. we successfully analyzed the trace, replayed it via real threads and measured the replayed workload's scheduling properties. This is how it looked like in 'top' output: PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 7164 mingo 20 0 1434m 8080 888 R 57.0 0.1 0:02.04 :perf 7165 mingo 20 0 1434m 8080 888 R 41.8 0.1 0:01.52 :perf 7228 mingo 20 0 1434m 8080 888 R 39.8 0.1 0:01.44 :gcc 7225 mingo 20 0 1434m 8080 888 R 33.8 0.1 0:01.26 :gcc 7202 mingo 20 0 1434m 8080 888 R 31.2 0.1 0:01.16 :sh 7222 mingo 20 0 1434m 8080 888 R 25.2 0.1 0:00.96 :sh 7211 mingo 20 0 1434m 8080 888 R 21.9 0.1 0:00.82 :sh 7213 mingo 20 0 1434m 8080 888 D 19.2 0.1 0:00.74 :sh 7194 mingo 20 0 1434m 8080 888 D 18.6 0.1 0:00.72 :make There's still various kinks in it - more patches to come. Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-11 18:12:54 +08:00
{
struct perf_sched *sched = container_of(tool, struct perf_sched, tool);
perf sched: Fix bad event alignment perf sched raises the following error when it meets a sched switch event: perf: builtin-sched.c:286: register_pid: Assertion `!(pid >= 65536)' failed. Abandon Currently in x86-64, the sched switch events have a hole in the middle of the structure: u16 common_type; u8 common_flags; u8 common_preempt_count; u32 common_pid; u32 common_tgid; char prev_comm[16]; u32 prev_pid; u32 prev_prio; <--- there u64 prev_state; char next_comm[16]; u32 next_pid; u32 next_prio; Gcc inserts a 4 bytes hole there for prev_state to be u64 aligned. And the events are exported to userspace with this hole. But in userspace, from perf sched, we fetch it using a structure that has a new field in the beginning: u32 size. This is because our trace is exported with its size as a field. But now that we have this new field, the hole in the middle disappears because it makes prev_state becoming well aligned. And since we are using a pointer to the raw trace using this struct, instead of reading prev_state, we are reading the hole. We could fix it by keeping the size seperate from the struct but actually there a lot of other potential problems: some fields may be saved as long in a 64 bits system and later read as long in a 32 bits system. Also this direct cast doesn't care about the endianness differences between the host traced machine and the machine in which we do the post processing. So instead of using such dangerous direct casts, fetch the values using the trace parsing API that already takes care of all these problems. Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-12 08:43:45 +08:00
/* run the fork event through the perf machineruy */
perf_event__process_fork(tool, event, sample, machine);
/* and then run additional processing needed for this command */
perf sched: Don't read all tracepoint variables in advance Do it just at the actual consumer of these fields, that way we avoid needless lookups: [root@sandy ~]# perf sched record sleep 30s [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 8.585 MB perf.data (~375063 samples) ] Before: [root@sandy ~]# perf stat -r 10 perf sched lat > /dev/null Performance counter stats for 'perf sched lat' (10 runs): 103.592215 task-clock # 0.993 CPUs utilized ( +- 0.33% ) 12 context-switches # 0.114 K/sec ( +- 3.29% ) 0 cpu-migrations # 0.000 K/sec 7,605 page-faults # 0.073 M/sec ( +- 0.00% ) 345,796,112 cycles # 3.338 GHz ( +- 0.07% ) [82.90%] 106,876,796 stalled-cycles-frontend # 30.91% frontend cycles idle ( +- 0.38% ) [83.23%] 62,060,877 stalled-cycles-backend # 17.95% backend cycles idle ( +- 0.80% ) [67.14%] 628,246,586 instructions # 1.82 insns per cycle # 0.17 stalled cycles per insn ( +- 0.04% ) [83.64%] 134,962,057 branches # 1302.820 M/sec ( +- 0.10% ) [83.64%] 1,233,037 branch-misses # 0.91% of all branches ( +- 0.29% ) [83.41%] 0.104333272 seconds time elapsed ( +- 0.33% ) [root@sandy ~]# perf stat -r 10 perf sched lat > /dev/null Performance counter stats for 'perf sched lat' (10 runs): 98.848272 task-clock # 0.993 CPUs utilized ( +- 0.48% ) 11 context-switches # 0.112 K/sec ( +- 2.83% ) 0 cpu-migrations # 0.003 K/sec ( +- 50.92% ) 7,604 page-faults # 0.077 M/sec ( +- 0.00% ) 332,216,085 cycles # 3.361 GHz ( +- 0.14% ) [82.87%] 100,623,710 stalled-cycles-frontend # 30.29% frontend cycles idle ( +- 0.53% ) [82.95%] 58,788,692 stalled-cycles-backend # 17.70% backend cycles idle ( +- 0.59% ) [67.15%] 609,402,433 instructions # 1.83 insns per cycle # 0.17 stalled cycles per insn ( +- 0.04% ) [83.76%] 131,277,138 branches # 1328.067 M/sec ( +- 0.06% ) [83.77%] 1,117,871 branch-misses # 0.85% of all branches ( +- 0.32% ) [83.51%] 0.099580430 seconds time elapsed ( +- 0.48% ) [root@sandy ~]# Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Namhyung Kim <namhyung@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-kracdpw8wqlr0xjh75uk8g11@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-09-12 06:29:17 +08:00
if (sched->tp_handler->fork_event)
return sched->tp_handler->fork_event(sched, event, machine);
perf sched: Use perf_evsel__{int,str}val This patch also stops reading the common fields, as they were not being used except for one ->common_pid case that was replaced by sample->tid, i.e. the info is already in the perf_sample struct. Also it only fills the _event structures when there is a handler. [root@sandy ~]# perf sched record sleep 30s [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 8.585 MB perf.data (~375063 samples) ] Before: [root@sandy ~]# perf stat -r 10 perf sched lat > /dev/null Performance counter stats for 'perf sched lat' (10 runs): 129.117838 task-clock # 0.994 CPUs utilized ( +- 0.28% ) 14 context-switches # 0.111 K/sec ( +- 2.10% ) 0 cpu-migrations # 0.002 K/sec ( +- 66.67% ) 7,654 page-faults # 0.059 M/sec ( +- 0.67% ) 438,121,661 cycles # 3.393 GHz ( +- 0.06% ) [83.06%] 150,808,605 stalled-cycles-frontend # 34.42% frontend cycles idle ( +- 0.14% ) [83.10%] 80,748,941 stalled-cycles-backend # 18.43% backend cycles idle ( +- 0.64% ) [66.73%] 758,605,879 instructions # 1.73 insns per cycle # 0.20 stalled cycles per insn ( +- 0.08% ) [83.54%] 162,164,321 branches # 1255.940 M/sec ( +- 0.10% ) [83.70%] 1,609,903 branch-misses # 0.99% of all branches ( +- 0.08% ) [83.62%] 0.129949153 seconds time elapsed ( +- 0.28% ) After: [root@sandy ~]# perf stat -r 10 perf sched lat > /dev/null Performance counter stats for 'perf sched lat' (10 runs): 103.592215 task-clock # 0.993 CPUs utilized ( +- 0.33% ) 12 context-switches # 0.114 K/sec ( +- 3.29% ) 0 cpu-migrations # 0.000 K/sec 7,605 page-faults # 0.073 M/sec ( +- 0.00% ) 345,796,112 cycles # 3.338 GHz ( +- 0.07% ) [82.90%] 106,876,796 stalled-cycles-frontend # 30.91% frontend cycles idle ( +- 0.38% ) [83.23%] 62,060,877 stalled-cycles-backend # 17.95% backend cycles idle ( +- 0.80% ) [67.14%] 628,246,586 instructions # 1.82 insns per cycle # 0.17 stalled cycles per insn ( +- 0.04% ) [83.64%] 134,962,057 branches # 1302.820 M/sec ( +- 0.10% ) [83.64%] 1,233,037 branch-misses # 0.91% of all branches ( +- 0.29% ) [83.41%] 0.104333272 seconds time elapsed ( +- 0.33% ) [root@sandy ~]# Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Namhyung Kim <namhyung@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-weu9t63zkrfrazkn0gxj48xy@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-09-12 06:29:17 +08:00
return 0;
perf sched: Implement the scheduling workload replay engine Integrate the schedbench.c bits with the raw trace events that we get from the perf machinery, and activate the workload replayer/simulator. Example of a captured 'make -j' workload: $ perf sched run measurement overhead: 90 nsecs sleep measurement overhead: 2724743 nsecs the run test took 1000081 nsecs the sleep test took 2981111 nsecs version = 0.5 ... nr_run_events: 70 nr_sleep_events: 66 nr_wakeup_events: 9 target-less wakeups: 71 multi-target wakeups: 47 run events optimized: 139 task 0 ( perf: 6607), nr_events: 2 task 1 ( perf: 6608), nr_events: 6 task 2 ( : 0), nr_events: 1 task 3 ( make: 6609), nr_events: 5 task 4 ( sh: 6610), nr_events: 4 task 5 ( make: 6611), nr_events: 6 task 6 ( sh: 6612), nr_events: 4 task 7 ( make: 6613), nr_events: 5 task 8 ( migration/11: 25), nr_events: 1 task 9 ( migration/13: 29), nr_events: 1 task 10 ( migration/15: 33), nr_events: 1 task 11 ( migration/9: 21), nr_events: 1 task 12 ( sh: 6614), nr_events: 4 task 13 ( make: 6615), nr_events: 5 task 14 ( sh: 6616), nr_events: 4 task 15 ( make: 6617), nr_events: 7 task 16 ( migration/3: 9), nr_events: 1 task 17 ( migration/5: 13), nr_events: 1 task 18 ( migration/7: 17), nr_events: 1 task 19 ( migration/1: 5), nr_events: 1 task 20 ( sh: 6618), nr_events: 4 task 21 ( make: 6619), nr_events: 5 task 22 ( sh: 6620), nr_events: 4 task 23 ( make: 6621), nr_events: 10 task 24 ( sh: 6623), nr_events: 3 task 25 ( gcc: 6624), nr_events: 4 task 26 ( gcc: 6625), nr_events: 4 task 27 ( gcc: 6626), nr_events: 5 task 28 ( collect2: 6627), nr_events: 5 task 29 ( sh: 6622), nr_events: 1 task 30 ( make: 6628), nr_events: 7 task 31 ( sh: 6630), nr_events: 4 task 32 ( gcc: 6631), nr_events: 4 task 33 ( sh: 6629), nr_events: 1 task 34 ( gcc: 6632), nr_events: 4 task 35 ( gcc: 6633), nr_events: 4 task 36 ( collect2: 6634), nr_events: 4 task 37 ( make: 6635), nr_events: 8 task 38 ( sh: 6637), nr_events: 4 task 39 ( sh: 6636), nr_events: 1 task 40 ( gcc: 6638), nr_events: 4 task 41 ( gcc: 6639), nr_events: 4 task 42 ( gcc: 6640), nr_events: 4 task 43 ( collect2: 6641), nr_events: 4 task 44 ( make: 6642), nr_events: 6 task 45 ( sh: 6643), nr_events: 5 task 46 ( sh: 6644), nr_events: 3 task 47 ( sh: 6645), nr_events: 4 task 48 ( make: 6646), nr_events: 6 task 49 ( sh: 6647), nr_events: 3 task 50 ( make: 6648), nr_events: 5 task 51 ( sh: 6649), nr_events: 5 task 52 ( sh: 6650), nr_events: 6 task 53 ( make: 6651), nr_events: 4 task 54 ( make: 6652), nr_events: 5 task 55 ( make: 6653), nr_events: 4 task 56 ( make: 6654), nr_events: 4 task 57 ( make: 6655), nr_events: 5 task 58 ( sh: 6656), nr_events: 4 task 59 ( gcc: 6657), nr_events: 9 task 60 ( ksoftirqd/3: 10), nr_events: 1 task 61 ( gcc: 6658), nr_events: 4 task 62 ( make: 6659), nr_events: 5 task 63 ( sh: 6660), nr_events: 3 task 64 ( gcc: 6661), nr_events: 5 task 65 ( collect2: 6662), nr_events: 4 ------------------------------------------------------------ #1 : 256.745, ravg: 256.74, cpu: 0.00 / 0.00 #2 : 439.372, ravg: 275.01, cpu: 0.00 / 0.00 #3 : 411.971, ravg: 288.70, cpu: 0.00 / 0.00 #4 : 385.500, ravg: 298.38, cpu: 0.00 / 0.00 #5 : 366.526, ravg: 305.20, cpu: 0.00 / 0.00 #6 : 381.281, ravg: 312.81, cpu: 0.00 / 0.00 #7 : 410.756, ravg: 322.60, cpu: 0.00 / 0.00 #8 : 368.009, ravg: 327.14, cpu: 0.00 / 0.00 #9 : 408.098, ravg: 335.24, cpu: 0.00 / 0.00 #10 : 368.582, ravg: 338.57, cpu: 0.00 / 0.00 I.e. we successfully analyzed the trace, replayed it via real threads and measured the replayed workload's scheduling properties. This is how it looked like in 'top' output: PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 7164 mingo 20 0 1434m 8080 888 R 57.0 0.1 0:02.04 :perf 7165 mingo 20 0 1434m 8080 888 R 41.8 0.1 0:01.52 :perf 7228 mingo 20 0 1434m 8080 888 R 39.8 0.1 0:01.44 :gcc 7225 mingo 20 0 1434m 8080 888 R 33.8 0.1 0:01.26 :gcc 7202 mingo 20 0 1434m 8080 888 R 31.2 0.1 0:01.16 :sh 7222 mingo 20 0 1434m 8080 888 R 25.2 0.1 0:00.96 :sh 7211 mingo 20 0 1434m 8080 888 R 21.9 0.1 0:00.82 :sh 7213 mingo 20 0 1434m 8080 888 D 19.2 0.1 0:00.74 :sh 7194 mingo 20 0 1434m 8080 888 D 18.6 0.1 0:00.72 :make There's still various kinks in it - more patches to come. Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-11 18:12:54 +08:00
}
static int process_sched_migrate_task_event(struct perf_tool *tool,
struct evsel *evsel,
perf tools: Use __maybe_used for unused variables perf defines both __used and __unused variables to use for marking unused variables. The variable __used is defined to __attribute__((__unused__)), which contradicts the kernel definition to __attribute__((__used__)) for new gcc versions. On Android, __used is also defined in system headers and this leads to warnings like: warning: '__used__' attribute ignored __unused is not defined in the kernel and is not a standard definition. If __unused is included everywhere instead of __used, this leads to conflicts with glibc headers, since glibc has a variables with this name in its headers. The best approach is to use __maybe_unused, the definition used in the kernel for __attribute__((unused)). In this way there is only one definition in perf sources (instead of 2 definitions that point to the same thing: __used and __unused) and it works on both Linux and Android. This patch simply replaces all instances of __used and __unused with __maybe_unused. Signed-off-by: Irina Tirdea <irina.tirdea@intel.com> Acked-by: Pekka Enberg <penberg@kernel.org> Cc: David Ahern <dsahern@gmail.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Namhyung Kim <namhyung.kim@lge.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Steven Rostedt <rostedt@goodmis.org> Link: http://lkml.kernel.org/r/1347315303-29906-7-git-send-email-irina.tirdea@intel.com [ committer note: fixed up conflict with a116e05 in builtin-sched.c ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-09-11 06:15:03 +08:00
struct perf_sample *sample,
struct machine *machine)
perf sched: Add -C option to measure on a specific CPU To refresh, trying to sched record only one CPU results in bogus latencies as below. I fixed^Wmade it stop doing the bad thing today, by following task migration events properly. Before: marge:/root/tmp # taskset -c 1 perf sched record -C 0 -- sleep 10 marge:/root/tmp # perf sched lat ----------------------------------------------------------------------------------------- Task | Runtime ms | Switches | Average delay ms | Maximum delay ms | ----------------------------------------------------------------------------------------- Xorg:4943 | 1.290 ms | 1 | avg: 1670.132 ms | max: 1670.132 ms | hald-addon-stor:3569 | 0.091 ms | 3 | avg: 658.609 ms | max: 1975.797 ms | hald-addon-stor:3573 | 0.209 ms | 4 | avg: 499.138 ms | max: 1990.565 ms | audispd:4270 | 0.012 ms | 1 | avg: 0.015 ms | max: 0.015 ms | .... marge:/root/tmp # perf sched trace|grep 'Xorg:4943' swapper-0 [000] 401.184013288: sched_stat_runtime: task: Xorg:4943 runtime: 1233188 [ns], vruntime: 19105169779 [ns] rt2870TimerQHan-4947 [000] 402.854140127: sched_stat_wait: task: Xorg:4943 wait: 580073 [ns] rt2870TimerQHan-4947 [000] 402.854141770: sched_migrate_task: task Xorg:4943 [140] from: 1 to: 0 rt2870TimerQHan-4947 [000] 402.854143854: sched_stat_wait: task: Xorg:4943 wait: 0 [ns] rt2870TimerQHan-4947 [000] 402.854145397: sched_switch: task rt2870TimerQHan:4947 [140] (D) ==> Xorg:4943 [140] Xorg-4943 [000] 402.854193133: sched_stat_runtime: task: Xorg:4943 runtime: 56546 [ns], vruntime: 11766332500 [ns] Xorg-4943 [000] 402.854196842: sched_switch: task Xorg:4943 [140] (S) ==> swapper:0 [140] After: marge:/root/tmp # taskset -c 1 perf sched record -C 0 -- sleep 10 marge:/root/tmp # perf sched lat ----------------------------------------------------------------------------------------- Task | Runtime ms | Switches | Average delay ms | Maximum delay ms | ----------------------------------------------------------------------------------------- amarokapp:11150 | 271.297 ms | 878 | avg: 0.130 ms | max: 1.057 ms | konsole:5965 | 1.370 ms | 12 | avg: 0.092 ms | max: 0.855 ms | Xorg:4943 | 179.980 ms | 1109 | avg: 0.087 ms | max: 1.206 ms | hald-addon-stor:3574 | 0.212 ms | 9 | avg: 0.040 ms | max: 0.169 ms | hald-addon-stor:3570 | 0.223 ms | 9 | avg: 0.037 ms | max: 0.223 ms | klauncher:5864 | 0.550 ms | 8 | avg: 0.032 ms | max: 0.048 ms | The 'Maximum delay ms' results are now sane. Signed-off-by: Mike Galbraith <efault@gmx.de> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-10 20:46:04 +08:00
{
struct perf_sched *sched = container_of(tool, struct perf_sched, tool);
perf sched: Add -C option to measure on a specific CPU To refresh, trying to sched record only one CPU results in bogus latencies as below. I fixed^Wmade it stop doing the bad thing today, by following task migration events properly. Before: marge:/root/tmp # taskset -c 1 perf sched record -C 0 -- sleep 10 marge:/root/tmp # perf sched lat ----------------------------------------------------------------------------------------- Task | Runtime ms | Switches | Average delay ms | Maximum delay ms | ----------------------------------------------------------------------------------------- Xorg:4943 | 1.290 ms | 1 | avg: 1670.132 ms | max: 1670.132 ms | hald-addon-stor:3569 | 0.091 ms | 3 | avg: 658.609 ms | max: 1975.797 ms | hald-addon-stor:3573 | 0.209 ms | 4 | avg: 499.138 ms | max: 1990.565 ms | audispd:4270 | 0.012 ms | 1 | avg: 0.015 ms | max: 0.015 ms | .... marge:/root/tmp # perf sched trace|grep 'Xorg:4943' swapper-0 [000] 401.184013288: sched_stat_runtime: task: Xorg:4943 runtime: 1233188 [ns], vruntime: 19105169779 [ns] rt2870TimerQHan-4947 [000] 402.854140127: sched_stat_wait: task: Xorg:4943 wait: 580073 [ns] rt2870TimerQHan-4947 [000] 402.854141770: sched_migrate_task: task Xorg:4943 [140] from: 1 to: 0 rt2870TimerQHan-4947 [000] 402.854143854: sched_stat_wait: task: Xorg:4943 wait: 0 [ns] rt2870TimerQHan-4947 [000] 402.854145397: sched_switch: task rt2870TimerQHan:4947 [140] (D) ==> Xorg:4943 [140] Xorg-4943 [000] 402.854193133: sched_stat_runtime: task: Xorg:4943 runtime: 56546 [ns], vruntime: 11766332500 [ns] Xorg-4943 [000] 402.854196842: sched_switch: task Xorg:4943 [140] (S) ==> swapper:0 [140] After: marge:/root/tmp # taskset -c 1 perf sched record -C 0 -- sleep 10 marge:/root/tmp # perf sched lat ----------------------------------------------------------------------------------------- Task | Runtime ms | Switches | Average delay ms | Maximum delay ms | ----------------------------------------------------------------------------------------- amarokapp:11150 | 271.297 ms | 878 | avg: 0.130 ms | max: 1.057 ms | konsole:5965 | 1.370 ms | 12 | avg: 0.092 ms | max: 0.855 ms | Xorg:4943 | 179.980 ms | 1109 | avg: 0.087 ms | max: 1.206 ms | hald-addon-stor:3574 | 0.212 ms | 9 | avg: 0.040 ms | max: 0.169 ms | hald-addon-stor:3570 | 0.223 ms | 9 | avg: 0.037 ms | max: 0.223 ms | klauncher:5864 | 0.550 ms | 8 | avg: 0.032 ms | max: 0.048 ms | The 'Maximum delay ms' results are now sane. Signed-off-by: Mike Galbraith <efault@gmx.de> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-10 20:46:04 +08:00
perf sched: Don't read all tracepoint variables in advance Do it just at the actual consumer of these fields, that way we avoid needless lookups: [root@sandy ~]# perf sched record sleep 30s [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 8.585 MB perf.data (~375063 samples) ] Before: [root@sandy ~]# perf stat -r 10 perf sched lat > /dev/null Performance counter stats for 'perf sched lat' (10 runs): 103.592215 task-clock # 0.993 CPUs utilized ( +- 0.33% ) 12 context-switches # 0.114 K/sec ( +- 3.29% ) 0 cpu-migrations # 0.000 K/sec 7,605 page-faults # 0.073 M/sec ( +- 0.00% ) 345,796,112 cycles # 3.338 GHz ( +- 0.07% ) [82.90%] 106,876,796 stalled-cycles-frontend # 30.91% frontend cycles idle ( +- 0.38% ) [83.23%] 62,060,877 stalled-cycles-backend # 17.95% backend cycles idle ( +- 0.80% ) [67.14%] 628,246,586 instructions # 1.82 insns per cycle # 0.17 stalled cycles per insn ( +- 0.04% ) [83.64%] 134,962,057 branches # 1302.820 M/sec ( +- 0.10% ) [83.64%] 1,233,037 branch-misses # 0.91% of all branches ( +- 0.29% ) [83.41%] 0.104333272 seconds time elapsed ( +- 0.33% ) [root@sandy ~]# perf stat -r 10 perf sched lat > /dev/null Performance counter stats for 'perf sched lat' (10 runs): 98.848272 task-clock # 0.993 CPUs utilized ( +- 0.48% ) 11 context-switches # 0.112 K/sec ( +- 2.83% ) 0 cpu-migrations # 0.003 K/sec ( +- 50.92% ) 7,604 page-faults # 0.077 M/sec ( +- 0.00% ) 332,216,085 cycles # 3.361 GHz ( +- 0.14% ) [82.87%] 100,623,710 stalled-cycles-frontend # 30.29% frontend cycles idle ( +- 0.53% ) [82.95%] 58,788,692 stalled-cycles-backend # 17.70% backend cycles idle ( +- 0.59% ) [67.15%] 609,402,433 instructions # 1.83 insns per cycle # 0.17 stalled cycles per insn ( +- 0.04% ) [83.76%] 131,277,138 branches # 1328.067 M/sec ( +- 0.06% ) [83.77%] 1,117,871 branch-misses # 0.85% of all branches ( +- 0.32% ) [83.51%] 0.099580430 seconds time elapsed ( +- 0.48% ) [root@sandy ~]# Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Namhyung Kim <namhyung@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-kracdpw8wqlr0xjh75uk8g11@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-09-12 06:29:17 +08:00
if (sched->tp_handler->migrate_task_event)
return sched->tp_handler->migrate_task_event(sched, evsel, sample, machine);
perf sched: Use perf_evsel__{int,str}val This patch also stops reading the common fields, as they were not being used except for one ->common_pid case that was replaced by sample->tid, i.e. the info is already in the perf_sample struct. Also it only fills the _event structures when there is a handler. [root@sandy ~]# perf sched record sleep 30s [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 8.585 MB perf.data (~375063 samples) ] Before: [root@sandy ~]# perf stat -r 10 perf sched lat > /dev/null Performance counter stats for 'perf sched lat' (10 runs): 129.117838 task-clock # 0.994 CPUs utilized ( +- 0.28% ) 14 context-switches # 0.111 K/sec ( +- 2.10% ) 0 cpu-migrations # 0.002 K/sec ( +- 66.67% ) 7,654 page-faults # 0.059 M/sec ( +- 0.67% ) 438,121,661 cycles # 3.393 GHz ( +- 0.06% ) [83.06%] 150,808,605 stalled-cycles-frontend # 34.42% frontend cycles idle ( +- 0.14% ) [83.10%] 80,748,941 stalled-cycles-backend # 18.43% backend cycles idle ( +- 0.64% ) [66.73%] 758,605,879 instructions # 1.73 insns per cycle # 0.20 stalled cycles per insn ( +- 0.08% ) [83.54%] 162,164,321 branches # 1255.940 M/sec ( +- 0.10% ) [83.70%] 1,609,903 branch-misses # 0.99% of all branches ( +- 0.08% ) [83.62%] 0.129949153 seconds time elapsed ( +- 0.28% ) After: [root@sandy ~]# perf stat -r 10 perf sched lat > /dev/null Performance counter stats for 'perf sched lat' (10 runs): 103.592215 task-clock # 0.993 CPUs utilized ( +- 0.33% ) 12 context-switches # 0.114 K/sec ( +- 3.29% ) 0 cpu-migrations # 0.000 K/sec 7,605 page-faults # 0.073 M/sec ( +- 0.00% ) 345,796,112 cycles # 3.338 GHz ( +- 0.07% ) [82.90%] 106,876,796 stalled-cycles-frontend # 30.91% frontend cycles idle ( +- 0.38% ) [83.23%] 62,060,877 stalled-cycles-backend # 17.95% backend cycles idle ( +- 0.80% ) [67.14%] 628,246,586 instructions # 1.82 insns per cycle # 0.17 stalled cycles per insn ( +- 0.04% ) [83.64%] 134,962,057 branches # 1302.820 M/sec ( +- 0.10% ) [83.64%] 1,233,037 branch-misses # 0.91% of all branches ( +- 0.29% ) [83.41%] 0.104333272 seconds time elapsed ( +- 0.33% ) [root@sandy ~]# Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Namhyung Kim <namhyung@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-weu9t63zkrfrazkn0gxj48xy@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-09-12 06:29:17 +08:00
return 0;
perf sched: Add -C option to measure on a specific CPU To refresh, trying to sched record only one CPU results in bogus latencies as below. I fixed^Wmade it stop doing the bad thing today, by following task migration events properly. Before: marge:/root/tmp # taskset -c 1 perf sched record -C 0 -- sleep 10 marge:/root/tmp # perf sched lat ----------------------------------------------------------------------------------------- Task | Runtime ms | Switches | Average delay ms | Maximum delay ms | ----------------------------------------------------------------------------------------- Xorg:4943 | 1.290 ms | 1 | avg: 1670.132 ms | max: 1670.132 ms | hald-addon-stor:3569 | 0.091 ms | 3 | avg: 658.609 ms | max: 1975.797 ms | hald-addon-stor:3573 | 0.209 ms | 4 | avg: 499.138 ms | max: 1990.565 ms | audispd:4270 | 0.012 ms | 1 | avg: 0.015 ms | max: 0.015 ms | .... marge:/root/tmp # perf sched trace|grep 'Xorg:4943' swapper-0 [000] 401.184013288: sched_stat_runtime: task: Xorg:4943 runtime: 1233188 [ns], vruntime: 19105169779 [ns] rt2870TimerQHan-4947 [000] 402.854140127: sched_stat_wait: task: Xorg:4943 wait: 580073 [ns] rt2870TimerQHan-4947 [000] 402.854141770: sched_migrate_task: task Xorg:4943 [140] from: 1 to: 0 rt2870TimerQHan-4947 [000] 402.854143854: sched_stat_wait: task: Xorg:4943 wait: 0 [ns] rt2870TimerQHan-4947 [000] 402.854145397: sched_switch: task rt2870TimerQHan:4947 [140] (D) ==> Xorg:4943 [140] Xorg-4943 [000] 402.854193133: sched_stat_runtime: task: Xorg:4943 runtime: 56546 [ns], vruntime: 11766332500 [ns] Xorg-4943 [000] 402.854196842: sched_switch: task Xorg:4943 [140] (S) ==> swapper:0 [140] After: marge:/root/tmp # taskset -c 1 perf sched record -C 0 -- sleep 10 marge:/root/tmp # perf sched lat ----------------------------------------------------------------------------------------- Task | Runtime ms | Switches | Average delay ms | Maximum delay ms | ----------------------------------------------------------------------------------------- amarokapp:11150 | 271.297 ms | 878 | avg: 0.130 ms | max: 1.057 ms | konsole:5965 | 1.370 ms | 12 | avg: 0.092 ms | max: 0.855 ms | Xorg:4943 | 179.980 ms | 1109 | avg: 0.087 ms | max: 1.206 ms | hald-addon-stor:3574 | 0.212 ms | 9 | avg: 0.040 ms | max: 0.169 ms | hald-addon-stor:3570 | 0.223 ms | 9 | avg: 0.037 ms | max: 0.223 ms | klauncher:5864 | 0.550 ms | 8 | avg: 0.032 ms | max: 0.048 ms | The 'Maximum delay ms' results are now sane. Signed-off-by: Mike Galbraith <efault@gmx.de> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-10 20:46:04 +08:00
}
typedef int (*tracepoint_handler)(struct perf_tool *tool,
struct evsel *evsel,
struct perf_sample *sample,
struct machine *machine);
perf tools: Use __maybe_used for unused variables perf defines both __used and __unused variables to use for marking unused variables. The variable __used is defined to __attribute__((__unused__)), which contradicts the kernel definition to __attribute__((__used__)) for new gcc versions. On Android, __used is also defined in system headers and this leads to warnings like: warning: '__used__' attribute ignored __unused is not defined in the kernel and is not a standard definition. If __unused is included everywhere instead of __used, this leads to conflicts with glibc headers, since glibc has a variables with this name in its headers. The best approach is to use __maybe_unused, the definition used in the kernel for __attribute__((unused)). In this way there is only one definition in perf sources (instead of 2 definitions that point to the same thing: __used and __unused) and it works on both Linux and Android. This patch simply replaces all instances of __used and __unused with __maybe_unused. Signed-off-by: Irina Tirdea <irina.tirdea@intel.com> Acked-by: Pekka Enberg <penberg@kernel.org> Cc: David Ahern <dsahern@gmail.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Namhyung Kim <namhyung.kim@lge.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Steven Rostedt <rostedt@goodmis.org> Link: http://lkml.kernel.org/r/1347315303-29906-7-git-send-email-irina.tirdea@intel.com [ committer note: fixed up conflict with a116e05 in builtin-sched.c ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-09-11 06:15:03 +08:00
static int perf_sched__process_tracepoint_sample(struct perf_tool *tool __maybe_unused,
union perf_event *event __maybe_unused,
perf tools: Save some loops using perf_evlist__id2evsel Since we already ask for PERF_SAMPLE_ID and use it to quickly find the associated evsel, add handler func + data to struct perf_evsel to avoid using chains of if(strcmp(event_name)) and also to avoid all the linear list searches via trace_event_find. To demonstrate the technique convert 'perf sched' to it: # perf sched record sleep 5m And then: Performance counter stats for '/tmp/oldperf sched lat': 646.929438 task-clock # 0.999 CPUs utilized 9 context-switches # 0.000 M/sec 0 CPU-migrations # 0.000 M/sec 20,901 page-faults # 0.032 M/sec 1,290,144,450 cycles # 1.994 GHz <not supported> stalled-cycles-frontend <not supported> stalled-cycles-backend 1,606,158,439 instructions # 1.24 insns per cycle 339,088,395 branches # 524.151 M/sec 4,550,735 branch-misses # 1.34% of all branches 0.647524759 seconds time elapsed Versus: Performance counter stats for 'perf sched lat': 473.564691 task-clock # 0.999 CPUs utilized 9 context-switches # 0.000 M/sec 0 CPU-migrations # 0.000 M/sec 20,903 page-faults # 0.044 M/sec 944,367,984 cycles # 1.994 GHz <not supported> stalled-cycles-frontend <not supported> stalled-cycles-backend 1,442,385,571 instructions # 1.53 insns per cycle 308,383,106 branches # 651.195 M/sec 4,481,784 branch-misses # 1.45% of all branches 0.474215751 seconds time elapsed [root@emilia ~]# Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-1kbzpl74lwi6lavpqke2u2p3@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-11-29 03:57:40 +08:00
struct perf_sample *sample,
struct evsel *evsel,
perf tools: Save some loops using perf_evlist__id2evsel Since we already ask for PERF_SAMPLE_ID and use it to quickly find the associated evsel, add handler func + data to struct perf_evsel to avoid using chains of if(strcmp(event_name)) and also to avoid all the linear list searches via trace_event_find. To demonstrate the technique convert 'perf sched' to it: # perf sched record sleep 5m And then: Performance counter stats for '/tmp/oldperf sched lat': 646.929438 task-clock # 0.999 CPUs utilized 9 context-switches # 0.000 M/sec 0 CPU-migrations # 0.000 M/sec 20,901 page-faults # 0.032 M/sec 1,290,144,450 cycles # 1.994 GHz <not supported> stalled-cycles-frontend <not supported> stalled-cycles-backend 1,606,158,439 instructions # 1.24 insns per cycle 339,088,395 branches # 524.151 M/sec 4,550,735 branch-misses # 1.34% of all branches 0.647524759 seconds time elapsed Versus: Performance counter stats for 'perf sched lat': 473.564691 task-clock # 0.999 CPUs utilized 9 context-switches # 0.000 M/sec 0 CPU-migrations # 0.000 M/sec 20,903 page-faults # 0.044 M/sec 944,367,984 cycles # 1.994 GHz <not supported> stalled-cycles-frontend <not supported> stalled-cycles-backend 1,442,385,571 instructions # 1.53 insns per cycle 308,383,106 branches # 651.195 M/sec 4,481,784 branch-misses # 1.45% of all branches 0.474215751 seconds time elapsed [root@emilia ~]# Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-1kbzpl74lwi6lavpqke2u2p3@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-11-29 03:57:40 +08:00
struct machine *machine)
{
int err = 0;
if (evsel->handler != NULL) {
tracepoint_handler f = evsel->handler;
perf sched: Use perf_evsel__{int,str}val This patch also stops reading the common fields, as they were not being used except for one ->common_pid case that was replaced by sample->tid, i.e. the info is already in the perf_sample struct. Also it only fills the _event structures when there is a handler. [root@sandy ~]# perf sched record sleep 30s [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 8.585 MB perf.data (~375063 samples) ] Before: [root@sandy ~]# perf stat -r 10 perf sched lat > /dev/null Performance counter stats for 'perf sched lat' (10 runs): 129.117838 task-clock # 0.994 CPUs utilized ( +- 0.28% ) 14 context-switches # 0.111 K/sec ( +- 2.10% ) 0 cpu-migrations # 0.002 K/sec ( +- 66.67% ) 7,654 page-faults # 0.059 M/sec ( +- 0.67% ) 438,121,661 cycles # 3.393 GHz ( +- 0.06% ) [83.06%] 150,808,605 stalled-cycles-frontend # 34.42% frontend cycles idle ( +- 0.14% ) [83.10%] 80,748,941 stalled-cycles-backend # 18.43% backend cycles idle ( +- 0.64% ) [66.73%] 758,605,879 instructions # 1.73 insns per cycle # 0.20 stalled cycles per insn ( +- 0.08% ) [83.54%] 162,164,321 branches # 1255.940 M/sec ( +- 0.10% ) [83.70%] 1,609,903 branch-misses # 0.99% of all branches ( +- 0.08% ) [83.62%] 0.129949153 seconds time elapsed ( +- 0.28% ) After: [root@sandy ~]# perf stat -r 10 perf sched lat > /dev/null Performance counter stats for 'perf sched lat' (10 runs): 103.592215 task-clock # 0.993 CPUs utilized ( +- 0.33% ) 12 context-switches # 0.114 K/sec ( +- 3.29% ) 0 cpu-migrations # 0.000 K/sec 7,605 page-faults # 0.073 M/sec ( +- 0.00% ) 345,796,112 cycles # 3.338 GHz ( +- 0.07% ) [82.90%] 106,876,796 stalled-cycles-frontend # 30.91% frontend cycles idle ( +- 0.38% ) [83.23%] 62,060,877 stalled-cycles-backend # 17.95% backend cycles idle ( +- 0.80% ) [67.14%] 628,246,586 instructions # 1.82 insns per cycle # 0.17 stalled cycles per insn ( +- 0.04% ) [83.64%] 134,962,057 branches # 1302.820 M/sec ( +- 0.10% ) [83.64%] 1,233,037 branch-misses # 0.91% of all branches ( +- 0.29% ) [83.41%] 0.104333272 seconds time elapsed ( +- 0.33% ) [root@sandy ~]# Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Namhyung Kim <namhyung@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-weu9t63zkrfrazkn0gxj48xy@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-09-12 06:29:17 +08:00
err = f(tool, evsel, sample, machine);
perf tools: Save some loops using perf_evlist__id2evsel Since we already ask for PERF_SAMPLE_ID and use it to quickly find the associated evsel, add handler func + data to struct perf_evsel to avoid using chains of if(strcmp(event_name)) and also to avoid all the linear list searches via trace_event_find. To demonstrate the technique convert 'perf sched' to it: # perf sched record sleep 5m And then: Performance counter stats for '/tmp/oldperf sched lat': 646.929438 task-clock # 0.999 CPUs utilized 9 context-switches # 0.000 M/sec 0 CPU-migrations # 0.000 M/sec 20,901 page-faults # 0.032 M/sec 1,290,144,450 cycles # 1.994 GHz <not supported> stalled-cycles-frontend <not supported> stalled-cycles-backend 1,606,158,439 instructions # 1.24 insns per cycle 339,088,395 branches # 524.151 M/sec 4,550,735 branch-misses # 1.34% of all branches 0.647524759 seconds time elapsed Versus: Performance counter stats for 'perf sched lat': 473.564691 task-clock # 0.999 CPUs utilized 9 context-switches # 0.000 M/sec 0 CPU-migrations # 0.000 M/sec 20,903 page-faults # 0.044 M/sec 944,367,984 cycles # 1.994 GHz <not supported> stalled-cycles-frontend <not supported> stalled-cycles-backend 1,442,385,571 instructions # 1.53 insns per cycle 308,383,106 branches # 651.195 M/sec 4,481,784 branch-misses # 1.45% of all branches 0.474215751 seconds time elapsed [root@emilia ~]# Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-1kbzpl74lwi6lavpqke2u2p3@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-11-29 03:57:40 +08:00
}
return err;
}
static int perf_sched__process_comm(struct perf_tool *tool __maybe_unused,
union perf_event *event,
struct perf_sample *sample,
struct machine *machine)
{
struct thread *thread;
struct thread_runtime *tr;
int err;
err = perf_event__process_comm(tool, event, sample, machine);
if (err)
return err;
thread = machine__find_thread(machine, sample->pid, sample->tid);
if (!thread) {
pr_err("Internal error: can't find thread\n");
return -1;
}
tr = thread__get_runtime(thread);
if (tr == NULL) {
thread__put(thread);
return -1;
}
tr->comm_changed = true;
thread__put(thread);
return 0;
}
static int perf_sched__read_events(struct perf_sched *sched)
{
const struct evsel_str_handler handlers[] = {
perf tools: Save some loops using perf_evlist__id2evsel Since we already ask for PERF_SAMPLE_ID and use it to quickly find the associated evsel, add handler func + data to struct perf_evsel to avoid using chains of if(strcmp(event_name)) and also to avoid all the linear list searches via trace_event_find. To demonstrate the technique convert 'perf sched' to it: # perf sched record sleep 5m And then: Performance counter stats for '/tmp/oldperf sched lat': 646.929438 task-clock # 0.999 CPUs utilized 9 context-switches # 0.000 M/sec 0 CPU-migrations # 0.000 M/sec 20,901 page-faults # 0.032 M/sec 1,290,144,450 cycles # 1.994 GHz <not supported> stalled-cycles-frontend <not supported> stalled-cycles-backend 1,606,158,439 instructions # 1.24 insns per cycle 339,088,395 branches # 524.151 M/sec 4,550,735 branch-misses # 1.34% of all branches 0.647524759 seconds time elapsed Versus: Performance counter stats for 'perf sched lat': 473.564691 task-clock # 0.999 CPUs utilized 9 context-switches # 0.000 M/sec 0 CPU-migrations # 0.000 M/sec 20,903 page-faults # 0.044 M/sec 944,367,984 cycles # 1.994 GHz <not supported> stalled-cycles-frontend <not supported> stalled-cycles-backend 1,442,385,571 instructions # 1.53 insns per cycle 308,383,106 branches # 651.195 M/sec 4,481,784 branch-misses # 1.45% of all branches 0.474215751 seconds time elapsed [root@emilia ~]# Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-1kbzpl74lwi6lavpqke2u2p3@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-11-29 03:57:40 +08:00
{ "sched:sched_switch", process_sched_switch_event, },
{ "sched:sched_stat_runtime", process_sched_runtime_event, },
{ "sched:sched_wakeup", process_sched_wakeup_event, },
{ "sched:sched_wakeup_new", process_sched_wakeup_event, },
{ "sched:sched_migrate_task", process_sched_migrate_task_event, },
};
struct perf_session *session;
struct perf_data data = {
.path = input_name,
.mode = PERF_DATA_MODE_READ,
.force = sched->force,
};
int rc = -1;
session = perf_session__new(&data, false, &sched->tool);
perf session: Return error code for perf_session__new() function on failure This patch is to return error code of perf_new_session function on failure instead of NULL. Test Results: Before Fix: $ perf c2c report -input failed to open nput: No such file or directory $ echo $? 0 $ After Fix: $ perf c2c report -input failed to open nput: No such file or directory $ echo $? 254 $ Committer notes: Fix 'perf tests topology' case, where we use that TEST_ASSERT_VAL(..., session), i.e. we need to pass zero in case of failure, which was the case before when NULL was returned by perf_session__new() for failure, but now we need to negate the result of IS_ERR(session) to respect that TEST_ASSERT_VAL) expectation of zero meaning failure. Reported-by: Nageswara R Sastry <rnsastry@linux.vnet.ibm.com> Signed-off-by: Mamatha Inamdar <mamatha4@linux.vnet.ibm.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Tested-by: Nageswara R Sastry <rnsastry@linux.vnet.ibm.com> Acked-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com> Reviewed-by: Jiri Olsa <jolsa@redhat.com> Reviewed-by: Mukesh Ojha <mojha@codeaurora.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alexey Budankov <alexey.budankov@linux.intel.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Jeremie Galarneau <jeremie.galarneau@efficios.com> Cc: Kate Stewart <kstewart@linuxfoundation.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Shawn Landden <shawn@git.icu> Cc: Song Liu <songliubraving@fb.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tzvetomir Stoyanov <tstoyanov@vmware.com> Link: http://lore.kernel.org/lkml/20190822071223.17892.45782.stgit@localhost.localdomain Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-08-22 15:20:49 +08:00
if (IS_ERR(session)) {
pr_debug("Error creating perf session");
return PTR_ERR(session);
}
perf tools: Check recorded kernel version when finding vmlinux Currently vmlinux_path__init() only tries to find vmlinux file from current directory, /boot and some canonical directories with version number of the running kernel. This can be a problem when reporting old data recorded on a kernel version not running currently. We can use --symfs option for this but it's annoying for user to do it always. As we already have the info in the perf.data file, it can be changed to use it for the search automatically. Before: $ perf report ... # Samples: 4K of event 'cpu-clock' # Event count (approx.): 1067250000 # # Overhead Command Shared Object Symbol # ........ .......... ................. .............................. 71.87% swapper [kernel.kallsyms] [k] recover_probed_instruction After: # Overhead Command Shared Object Symbol # ........ .......... ................. .................... 71.87% swapper [kernel.kallsyms] [k] native_safe_halt This requires to change signature of symbol__init() to receive struct perf_session_env *. Reported-by: Minchan Kim <minchan@kernel.org> Signed-off-by: Namhyung Kim <namhyung@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Namhyung Kim <namhyung.kim@lge.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/1407825645-24586-14-git-send-email-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2014-08-12 14:40:45 +08:00
symbol__init(&session->header.env);
if (perf_session__set_tracepoints_handlers(session, handlers))
goto out_delete;
perf tools: Save some loops using perf_evlist__id2evsel Since we already ask for PERF_SAMPLE_ID and use it to quickly find the associated evsel, add handler func + data to struct perf_evsel to avoid using chains of if(strcmp(event_name)) and also to avoid all the linear list searches via trace_event_find. To demonstrate the technique convert 'perf sched' to it: # perf sched record sleep 5m And then: Performance counter stats for '/tmp/oldperf sched lat': 646.929438 task-clock # 0.999 CPUs utilized 9 context-switches # 0.000 M/sec 0 CPU-migrations # 0.000 M/sec 20,901 page-faults # 0.032 M/sec 1,290,144,450 cycles # 1.994 GHz <not supported> stalled-cycles-frontend <not supported> stalled-cycles-backend 1,606,158,439 instructions # 1.24 insns per cycle 339,088,395 branches # 524.151 M/sec 4,550,735 branch-misses # 1.34% of all branches 0.647524759 seconds time elapsed Versus: Performance counter stats for 'perf sched lat': 473.564691 task-clock # 0.999 CPUs utilized 9 context-switches # 0.000 M/sec 0 CPU-migrations # 0.000 M/sec 20,903 page-faults # 0.044 M/sec 944,367,984 cycles # 1.994 GHz <not supported> stalled-cycles-frontend <not supported> stalled-cycles-backend 1,442,385,571 instructions # 1.53 insns per cycle 308,383,106 branches # 651.195 M/sec 4,481,784 branch-misses # 1.45% of all branches 0.474215751 seconds time elapsed [root@emilia ~]# Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-1kbzpl74lwi6lavpqke2u2p3@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-11-29 03:57:40 +08:00
if (perf_session__has_traces(session, "record -R")) {
int err = perf_session__process_events(session);
if (err) {
pr_err("Failed to process events, error %d", err);
goto out_delete;
}
sched->nr_events = session->evlist->stats.nr_events[0];
sched->nr_lost_events = session->evlist->stats.total_lost;
sched->nr_lost_chunks = session->evlist->stats.nr_events[PERF_RECORD_LOST];
}
rc = 0;
out_delete:
perf_session__delete(session);
return rc;
}
/*
* scheduling times are printed as msec.usec
*/
static inline void print_sched_time(unsigned long long nsecs, int width)
{
unsigned long msecs;
unsigned long usecs;
msecs = nsecs / NSEC_PER_MSEC;
nsecs -= msecs * NSEC_PER_MSEC;
usecs = nsecs / NSEC_PER_USEC;
printf("%*lu.%03lu ", width, msecs, usecs);
}
/*
* returns runtime data for event, allocating memory for it the
* first time it is used.
*/
static struct evsel_runtime *perf_evsel__get_runtime(struct evsel *evsel)
{
struct evsel_runtime *r = evsel->priv;
if (r == NULL) {
r = zalloc(sizeof(struct evsel_runtime));
evsel->priv = r;
}
return r;
}
/*
* save last time event was seen per cpu
*/
static void perf_evsel__save_time(struct evsel *evsel,
u64 timestamp, u32 cpu)
{
struct evsel_runtime *r = perf_evsel__get_runtime(evsel);
if (r == NULL)
return;
if ((cpu >= r->ncpu) || (r->last_time == NULL)) {
int i, n = __roundup_pow_of_two(cpu+1);
void *p = r->last_time;
p = realloc(r->last_time, n * sizeof(u64));
if (!p)
return;
r->last_time = p;
for (i = r->ncpu; i < n; ++i)
r->last_time[i] = (u64) 0;
r->ncpu = n;
}
r->last_time[cpu] = timestamp;
}
/* returns last time this event was seen on the given cpu */
static u64 perf_evsel__get_time(struct evsel *evsel, u32 cpu)
{
struct evsel_runtime *r = perf_evsel__get_runtime(evsel);
if ((r == NULL) || (r->last_time == NULL) || (cpu >= r->ncpu))
return 0;
return r->last_time[cpu];
}
static int comm_width = 30;
static char *timehist_get_commstr(struct thread *thread)
{
static char str[32];
const char *comm = thread__comm_str(thread);
pid_t tid = thread->tid;
pid_t pid = thread->pid_;
int n;
if (pid == 0)
n = scnprintf(str, sizeof(str), "%s", comm);
else if (tid != pid)
n = scnprintf(str, sizeof(str), "%s[%d/%d]", comm, tid, pid);
else
n = scnprintf(str, sizeof(str), "%s[%d]", comm, tid);
if (n > comm_width)
comm_width = n;
return str;
}
static void timehist_header(struct perf_sched *sched)
{
u32 ncpus = sched->max_cpu + 1;
u32 i, j;
printf("%15s %6s ", "time", "cpu");
if (sched->show_cpu_visual) {
printf(" ");
for (i = 0, j = 0; i < ncpus; ++i) {
printf("%x", j++);
if (j > 15)
j = 0;
}
printf(" ");
}
printf(" %-*s %9s %9s %9s", comm_width,
"task name", "wait time", "sch delay", "run time");
if (sched->show_state)
printf(" %s", "state");
printf("\n");
/*
* units row
*/
printf("%15s %-6s ", "", "");
if (sched->show_cpu_visual)
printf(" %*s ", ncpus, "");
printf(" %-*s %9s %9s %9s", comm_width,
"[tid/pid]", "(msec)", "(msec)", "(msec)");
if (sched->show_state)
printf(" %5s", "");
printf("\n");
/*
* separator
*/
printf("%.15s %.6s ", graph_dotted_line, graph_dotted_line);
if (sched->show_cpu_visual)
printf(" %.*s ", ncpus, graph_dotted_line);
printf(" %.*s %.9s %.9s %.9s", comm_width,
graph_dotted_line, graph_dotted_line, graph_dotted_line,
graph_dotted_line);
if (sched->show_state)
printf(" %.5s", graph_dotted_line);
printf("\n");
}
static char task_state_char(struct thread *thread, int state)
{
static const char state_to_char[] = TASK_STATE_TO_CHAR_STR;
unsigned bit = state ? ffs(state) : 0;
/* 'I' for idle */
if (thread->tid == 0)
return 'I';
return bit < sizeof(state_to_char) - 1 ? state_to_char[bit] : '?';
}
static void timehist_print_sample(struct perf_sched *sched,
struct evsel *evsel,
struct perf_sample *sample,
perf sched timehist: Add call graph options If callchains were recorded they are appended to the line with a default stack depth of 5: 1.874569 [0011] gcc[31949] 0.014 0.000 1.148 wait_for_completion_killable <- do_fork <- sys_vfork <- stub_vfork <- __vfork 1.874591 [0010] gcc[31951] 0.000 0.000 0.024 __cond_resched <- _cond_resched <- wait_for_completion <- stop_one_cpu <- sched_exec 1.874603 [0010] migration/10[59] 3.350 0.004 0.011 smpboot_thread_fn <- kthread <- ret_from_fork 1.874604 [0011] <idle> 1.148 0.000 0.035 cpu_startup_entry <- start_secondary 1.874723 [0005] <idle> 0.016 0.000 1.383 cpu_startup_entry <- start_secondary 1.874746 [0005] gcc[31949] 0.153 0.078 0.022 do_wait sys_wait4 <- system_call_fastpath <- __GI___waitpid --no-call-graph can be used to not show the callchains. --max-stack is used to control the number of frames shown (default of 5). -x/--excl options can be used to collapse redundant callchains to get more relevant data on screen. Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Ingo Molnar <mingo@kernel.org> Acked-by: Jiri Olsa <jolsa@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/20161116060634.28477-7-namhyung@kernel.org [ Add documentation based on above commit message ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-11-16 14:06:32 +08:00
struct addr_location *al,
perf sched timehist: Add option to specify time window of interest Add option to allow user to control analysis window. e.g., collect data for time window and analyze a segment of interest within that window. Committer notes: Testing it: # perf sched record -a usleep 1 [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 1.593 MB perf.data (25 samples) ] # # perf sched timehist | head -18 Samples do not have callchains. time cpu task name wait time sch delay run time [tid/pid] (msec) (msec) (msec) ------------- ------ --------------- --------- --------- -------- 19818.635579 [0002] <idle> 0.000 0.000 0.000 19818.635613 [0000] perf[9116] 0.000 0.000 0.000 19818.635676 [0000] <idle> 0.000 0.000 0.063 19818.635678 [0000] rcuos/2[29] 0.000 0.002 0.001 19818.635696 [0002] perf[9117] 0.000 0.004 0.116 19818.635702 [0000] <idle> 0.001 0.000 0.024 19818.635709 [0002] migration/2[25] 0.000 0.003 0.012 19818.636263 [0000] usleep[9117] 0.005 0.000 0.560 19818.636316 [0000] <idle> 0.560 0.000 0.053 19818.636358 [0002] <idle> 0.129 0.000 0.649 19818.636358 [0000] usleep[9117] 0.053 0.002 0.042 # # perf sched timehist --time 19818.635696, Samples do not have callchains. time cpu task name wait time sch delay run time [tid/pid] (msec) (msec) (msec) ------------- ------ --------------- -------- --------- --------- 19818.635696 [0002] perf[9117] 0.000 0.120 0.000 19818.635702 [0000] <idle> 0.019 0.000 0.006 19818.635709 [0002] migration/2[25] 0.000 0.003 0.012 19818.636263 [0000] usleep[9117] 0.005 0.000 0.560 19818.636316 [0000] <idle> 0.560 0.000 0.053 19818.636358 [0002] <idle> 0.129 0.000 0.649 19818.636358 [0000] usleep[9117] 0.053 0.002 0.042 # # perf sched timehist --time 19818.635696,19818.635709 Samples do not have callchains. time cpu task name wait time sch delay run time [tid/pid] (msec) (msec) (msec) ------------- ------ --------------- --------- --------- --------- 19818.635696 [0002] perf[9117] 0.000 0.120 0.000 19818.635702 [0000] <idle> 0.019 0.000 0.006 19818.635709 [0002] migration/2[25] 0.000 0.003 0.012 19818.635709 [0000] usleep[9117] 0.005 0.000 0.006 # Signed-off-by: David Ahern <dsahern@gmail.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Acked-by: Namhyung Kim <namhyung@kernel.org> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1480439746-42695-5-git-send-email-dsahern@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-11-30 01:15:44 +08:00
struct thread *thread,
u64 t, int state)
{
struct thread_runtime *tr = thread__priv(thread);
const char *next_comm = perf_evsel__strval(evsel, sample, "next_comm");
const u32 next_pid = perf_evsel__intval(evsel, sample, "next_pid");
u32 max_cpus = sched->max_cpu + 1;
char tstr[64];
char nstr[30];
u64 wait_time;
perf sched timehist: Add option to specify time window of interest Add option to allow user to control analysis window. e.g., collect data for time window and analyze a segment of interest within that window. Committer notes: Testing it: # perf sched record -a usleep 1 [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 1.593 MB perf.data (25 samples) ] # # perf sched timehist | head -18 Samples do not have callchains. time cpu task name wait time sch delay run time [tid/pid] (msec) (msec) (msec) ------------- ------ --------------- --------- --------- -------- 19818.635579 [0002] <idle> 0.000 0.000 0.000 19818.635613 [0000] perf[9116] 0.000 0.000 0.000 19818.635676 [0000] <idle> 0.000 0.000 0.063 19818.635678 [0000] rcuos/2[29] 0.000 0.002 0.001 19818.635696 [0002] perf[9117] 0.000 0.004 0.116 19818.635702 [0000] <idle> 0.001 0.000 0.024 19818.635709 [0002] migration/2[25] 0.000 0.003 0.012 19818.636263 [0000] usleep[9117] 0.005 0.000 0.560 19818.636316 [0000] <idle> 0.560 0.000 0.053 19818.636358 [0002] <idle> 0.129 0.000 0.649 19818.636358 [0000] usleep[9117] 0.053 0.002 0.042 # # perf sched timehist --time 19818.635696, Samples do not have callchains. time cpu task name wait time sch delay run time [tid/pid] (msec) (msec) (msec) ------------- ------ --------------- -------- --------- --------- 19818.635696 [0002] perf[9117] 0.000 0.120 0.000 19818.635702 [0000] <idle> 0.019 0.000 0.006 19818.635709 [0002] migration/2[25] 0.000 0.003 0.012 19818.636263 [0000] usleep[9117] 0.005 0.000 0.560 19818.636316 [0000] <idle> 0.560 0.000 0.053 19818.636358 [0002] <idle> 0.129 0.000 0.649 19818.636358 [0000] usleep[9117] 0.053 0.002 0.042 # # perf sched timehist --time 19818.635696,19818.635709 Samples do not have callchains. time cpu task name wait time sch delay run time [tid/pid] (msec) (msec) (msec) ------------- ------ --------------- --------- --------- --------- 19818.635696 [0002] perf[9117] 0.000 0.120 0.000 19818.635702 [0000] <idle> 0.019 0.000 0.006 19818.635709 [0002] migration/2[25] 0.000 0.003 0.012 19818.635709 [0000] usleep[9117] 0.005 0.000 0.006 # Signed-off-by: David Ahern <dsahern@gmail.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Acked-by: Namhyung Kim <namhyung@kernel.org> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1480439746-42695-5-git-send-email-dsahern@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-11-30 01:15:44 +08:00
timestamp__scnprintf_usec(t, tstr, sizeof(tstr));
printf("%15s [%04d] ", tstr, sample->cpu);
if (sched->show_cpu_visual) {
u32 i;
char c;
printf(" ");
for (i = 0; i < max_cpus; ++i) {
/* flag idle times with 'i'; others are sched events */
if (i == sample->cpu)
c = (thread->tid == 0) ? 'i' : 's';
else
c = ' ';
printf("%c", c);
}
printf(" ");
}
printf(" %-*s ", comm_width, timehist_get_commstr(thread));
wait_time = tr->dt_sleep + tr->dt_iowait + tr->dt_preempt;
print_sched_time(wait_time, 6);
print_sched_time(tr->dt_delay, 6);
print_sched_time(tr->dt_run, 6);
if (sched->show_state)
printf(" %5c ", task_state_char(thread, state));
if (sched->show_next) {
snprintf(nstr, sizeof(nstr), "next: %s[%d]", next_comm, next_pid);
printf(" %-*s", comm_width, nstr);
}
if (sched->show_wakeups && !sched->show_next)
printf(" %-*s", comm_width, "");
perf sched timehist: Add call graph options If callchains were recorded they are appended to the line with a default stack depth of 5: 1.874569 [0011] gcc[31949] 0.014 0.000 1.148 wait_for_completion_killable <- do_fork <- sys_vfork <- stub_vfork <- __vfork 1.874591 [0010] gcc[31951] 0.000 0.000 0.024 __cond_resched <- _cond_resched <- wait_for_completion <- stop_one_cpu <- sched_exec 1.874603 [0010] migration/10[59] 3.350 0.004 0.011 smpboot_thread_fn <- kthread <- ret_from_fork 1.874604 [0011] <idle> 1.148 0.000 0.035 cpu_startup_entry <- start_secondary 1.874723 [0005] <idle> 0.016 0.000 1.383 cpu_startup_entry <- start_secondary 1.874746 [0005] gcc[31949] 0.153 0.078 0.022 do_wait sys_wait4 <- system_call_fastpath <- __GI___waitpid --no-call-graph can be used to not show the callchains. --max-stack is used to control the number of frames shown (default of 5). -x/--excl options can be used to collapse redundant callchains to get more relevant data on screen. Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Ingo Molnar <mingo@kernel.org> Acked-by: Jiri Olsa <jolsa@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/20161116060634.28477-7-namhyung@kernel.org [ Add documentation based on above commit message ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-11-16 14:06:32 +08:00
if (thread->tid == 0)
goto out;
if (sched->show_callchain)
printf(" ");
sample__fprintf_sym(sample, al, 0,
EVSEL__PRINT_SYM | EVSEL__PRINT_ONELINE |
EVSEL__PRINT_CALLCHAIN_ARROW |
EVSEL__PRINT_SKIP_IGNORED,
&callchain_cursor, symbol_conf.bt_stop_list, stdout);
perf sched timehist: Add call graph options If callchains were recorded they are appended to the line with a default stack depth of 5: 1.874569 [0011] gcc[31949] 0.014 0.000 1.148 wait_for_completion_killable <- do_fork <- sys_vfork <- stub_vfork <- __vfork 1.874591 [0010] gcc[31951] 0.000 0.000 0.024 __cond_resched <- _cond_resched <- wait_for_completion <- stop_one_cpu <- sched_exec 1.874603 [0010] migration/10[59] 3.350 0.004 0.011 smpboot_thread_fn <- kthread <- ret_from_fork 1.874604 [0011] <idle> 1.148 0.000 0.035 cpu_startup_entry <- start_secondary 1.874723 [0005] <idle> 0.016 0.000 1.383 cpu_startup_entry <- start_secondary 1.874746 [0005] gcc[31949] 0.153 0.078 0.022 do_wait sys_wait4 <- system_call_fastpath <- __GI___waitpid --no-call-graph can be used to not show the callchains. --max-stack is used to control the number of frames shown (default of 5). -x/--excl options can be used to collapse redundant callchains to get more relevant data on screen. Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Ingo Molnar <mingo@kernel.org> Acked-by: Jiri Olsa <jolsa@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/20161116060634.28477-7-namhyung@kernel.org [ Add documentation based on above commit message ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-11-16 14:06:32 +08:00
out:
printf("\n");
}
/*
* Explanation of delta-time stats:
*
* t = time of current schedule out event
* tprev = time of previous sched out event
* also time of schedule-in event for current task
* last_time = time of last sched change event for current task
* (i.e, time process was last scheduled out)
* ready_to_run = time of wakeup for current task
*
* -----|------------|------------|------------|------
* last ready tprev t
* time to run
*
* |-------- dt_wait --------|
* |- dt_delay -|-- dt_run --|
*
* dt_run = run time of current task
* dt_wait = time between last schedule out event for task and tprev
* represents time spent off the cpu
* dt_delay = time between wakeup and schedule-in of task
*/
static void timehist_update_runtime_stats(struct thread_runtime *r,
u64 t, u64 tprev)
{
r->dt_delay = 0;
r->dt_sleep = 0;
r->dt_iowait = 0;
r->dt_preempt = 0;
r->dt_run = 0;
if (tprev) {
r->dt_run = t - tprev;
if (r->ready_to_run) {
if (r->ready_to_run > tprev)
pr_debug("time travel: wakeup time for task > previous sched_switch event\n");
else
r->dt_delay = tprev - r->ready_to_run;
}
if (r->last_time > tprev)
pr_debug("time travel: last sched out time for task > previous sched_switch event\n");
else if (r->last_time) {
u64 dt_wait = tprev - r->last_time;
if (r->last_state == TASK_RUNNING)
r->dt_preempt = dt_wait;
else if (r->last_state == TASK_UNINTERRUPTIBLE)
r->dt_iowait = dt_wait;
else
r->dt_sleep = dt_wait;
}
}
update_stats(&r->run_stats, r->dt_run);
r->total_run_time += r->dt_run;
r->total_delay_time += r->dt_delay;
r->total_sleep_time += r->dt_sleep;
r->total_iowait_time += r->dt_iowait;
r->total_preempt_time += r->dt_preempt;
}
static bool is_idle_sample(struct perf_sample *sample,
struct evsel *evsel)
{
/* pid 0 == swapper == idle task */
if (strcmp(perf_evsel__name(evsel), "sched:sched_switch") == 0)
return perf_evsel__intval(evsel, sample, "prev_pid") == 0;
return sample->pid == 0;
}
static void save_task_callchain(struct perf_sched *sched,
struct perf_sample *sample,
struct evsel *evsel,
struct machine *machine)
{
struct callchain_cursor *cursor = &callchain_cursor;
struct thread *thread;
perf sched timehist: Add call graph options If callchains were recorded they are appended to the line with a default stack depth of 5: 1.874569 [0011] gcc[31949] 0.014 0.000 1.148 wait_for_completion_killable <- do_fork <- sys_vfork <- stub_vfork <- __vfork 1.874591 [0010] gcc[31951] 0.000 0.000 0.024 __cond_resched <- _cond_resched <- wait_for_completion <- stop_one_cpu <- sched_exec 1.874603 [0010] migration/10[59] 3.350 0.004 0.011 smpboot_thread_fn <- kthread <- ret_from_fork 1.874604 [0011] <idle> 1.148 0.000 0.035 cpu_startup_entry <- start_secondary 1.874723 [0005] <idle> 0.016 0.000 1.383 cpu_startup_entry <- start_secondary 1.874746 [0005] gcc[31949] 0.153 0.078 0.022 do_wait sys_wait4 <- system_call_fastpath <- __GI___waitpid --no-call-graph can be used to not show the callchains. --max-stack is used to control the number of frames shown (default of 5). -x/--excl options can be used to collapse redundant callchains to get more relevant data on screen. Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Ingo Molnar <mingo@kernel.org> Acked-by: Jiri Olsa <jolsa@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/20161116060634.28477-7-namhyung@kernel.org [ Add documentation based on above commit message ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-11-16 14:06:32 +08:00
/* want main thread for process - has maps */
thread = machine__findnew_thread(machine, sample->pid, sample->pid);
if (thread == NULL) {
pr_debug("Failed to get thread for pid %d.\n", sample->pid);
return;
perf sched timehist: Add call graph options If callchains were recorded they are appended to the line with a default stack depth of 5: 1.874569 [0011] gcc[31949] 0.014 0.000 1.148 wait_for_completion_killable <- do_fork <- sys_vfork <- stub_vfork <- __vfork 1.874591 [0010] gcc[31951] 0.000 0.000 0.024 __cond_resched <- _cond_resched <- wait_for_completion <- stop_one_cpu <- sched_exec 1.874603 [0010] migration/10[59] 3.350 0.004 0.011 smpboot_thread_fn <- kthread <- ret_from_fork 1.874604 [0011] <idle> 1.148 0.000 0.035 cpu_startup_entry <- start_secondary 1.874723 [0005] <idle> 0.016 0.000 1.383 cpu_startup_entry <- start_secondary 1.874746 [0005] gcc[31949] 0.153 0.078 0.022 do_wait sys_wait4 <- system_call_fastpath <- __GI___waitpid --no-call-graph can be used to not show the callchains. --max-stack is used to control the number of frames shown (default of 5). -x/--excl options can be used to collapse redundant callchains to get more relevant data on screen. Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Ingo Molnar <mingo@kernel.org> Acked-by: Jiri Olsa <jolsa@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/20161116060634.28477-7-namhyung@kernel.org [ Add documentation based on above commit message ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-11-16 14:06:32 +08:00
}
if (!sched->show_callchain || sample->callchain == NULL)
return;
perf sched timehist: Add call graph options If callchains were recorded they are appended to the line with a default stack depth of 5: 1.874569 [0011] gcc[31949] 0.014 0.000 1.148 wait_for_completion_killable <- do_fork <- sys_vfork <- stub_vfork <- __vfork 1.874591 [0010] gcc[31951] 0.000 0.000 0.024 __cond_resched <- _cond_resched <- wait_for_completion <- stop_one_cpu <- sched_exec 1.874603 [0010] migration/10[59] 3.350 0.004 0.011 smpboot_thread_fn <- kthread <- ret_from_fork 1.874604 [0011] <idle> 1.148 0.000 0.035 cpu_startup_entry <- start_secondary 1.874723 [0005] <idle> 0.016 0.000 1.383 cpu_startup_entry <- start_secondary 1.874746 [0005] gcc[31949] 0.153 0.078 0.022 do_wait sys_wait4 <- system_call_fastpath <- __GI___waitpid --no-call-graph can be used to not show the callchains. --max-stack is used to control the number of frames shown (default of 5). -x/--excl options can be used to collapse redundant callchains to get more relevant data on screen. Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Ingo Molnar <mingo@kernel.org> Acked-by: Jiri Olsa <jolsa@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/20161116060634.28477-7-namhyung@kernel.org [ Add documentation based on above commit message ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-11-16 14:06:32 +08:00
if (thread__resolve_callchain(thread, cursor, evsel, sample,
perf sched timehist: Enlarge max stack depth by 2 When it records callchains, they will always have 2 scheduler functions (__schedule + schedule or __schedule + preempt_schedule) and get ignored. So it should collect 2 more functions to show the expected number of callchains to user. Committer Notes: Example of final result, using the same perf.data file as in the previous cset comment, but this time redirecting the output of 'perf sched timehist' to a file instead of copy'n'pasting from xterm: [root@jouet experimental]# perf sched timehist > /tmp/bla [root@jouet experimental]# cat /tmp/bla time cpu task name wait time sch delay run time [tid/pid] (msec) (msec) (msec) -------- ---- -------------------- ------ ------ ----- 6.494998 [01] <idle> 0.000 0.000 0.000 6.495027 [02] perf[519] 0.000 0.000 0.000 schedule_hrtimeout_range_clock <- schedule_hrtimeout_range <- poll_schedule_timeout <- do_sys_poll <- sys_poll 6.495096 [03] <idle> 0.000 0.000 0.000 6.495100 [03] rcuos/0[9] 0.000 0.005 0.003 rcu_nocb_kthread <- kthread <- ret_from_fork 6.495113 [01] perf[520] 0.000 0.008 0.114 preempt_schedule_common <- _cond_resched <- wait_for_completion <- stop_one_cpu <- sched_exec <- do_execveat_common.isra.35 6.495121 [00] <idle> 0.000 0.000 0.000 6.495129 [01] migration/1[17] 0.000 0.003 0.016 smpboot_thread_fn <- kthread <- ret_from_fork 6.496085 [02] <idle> 0.000 0.000 1.057 6.496096 [02] kworker/u16:1[31169] 0.000 0.004 0.011 worker_thread <- kthread <- ret_from_fork 6.496096 [03] <idle> 0.003 0.000 0.996 6.496169 [02] <idle> 0.011 0.000 0.072 6.496171 [00] ls[520] 0.008 0.000 1.049 do_exit <- do_group_exit <- [unknown] <- entry_SYSCALL_64_fastpath 6.496172 [03] gnome-terminal-[4391] 0.000 0.003 0.076 schedule_hrtimeout_range_clock <- schedule_hrtimeout_range <- poll_schedule_timeout <- do_sys_poll <- sys_poll Signed-off-by: Namhyung Kim <namhyung@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/20161124011114.7102-3-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-11-24 09:11:14 +08:00
NULL, NULL, sched->max_stack + 2) != 0) {
if (verbose > 0)
pr_err("Failed to resolve callchain. Skipping\n");
perf sched timehist: Add call graph options If callchains were recorded they are appended to the line with a default stack depth of 5: 1.874569 [0011] gcc[31949] 0.014 0.000 1.148 wait_for_completion_killable <- do_fork <- sys_vfork <- stub_vfork <- __vfork 1.874591 [0010] gcc[31951] 0.000 0.000 0.024 __cond_resched <- _cond_resched <- wait_for_completion <- stop_one_cpu <- sched_exec 1.874603 [0010] migration/10[59] 3.350 0.004 0.011 smpboot_thread_fn <- kthread <- ret_from_fork 1.874604 [0011] <idle> 1.148 0.000 0.035 cpu_startup_entry <- start_secondary 1.874723 [0005] <idle> 0.016 0.000 1.383 cpu_startup_entry <- start_secondary 1.874746 [0005] gcc[31949] 0.153 0.078 0.022 do_wait sys_wait4 <- system_call_fastpath <- __GI___waitpid --no-call-graph can be used to not show the callchains. --max-stack is used to control the number of frames shown (default of 5). -x/--excl options can be used to collapse redundant callchains to get more relevant data on screen. Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Ingo Molnar <mingo@kernel.org> Acked-by: Jiri Olsa <jolsa@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/20161116060634.28477-7-namhyung@kernel.org [ Add documentation based on above commit message ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-11-16 14:06:32 +08:00
return;
perf sched timehist: Add call graph options If callchains were recorded they are appended to the line with a default stack depth of 5: 1.874569 [0011] gcc[31949] 0.014 0.000 1.148 wait_for_completion_killable <- do_fork <- sys_vfork <- stub_vfork <- __vfork 1.874591 [0010] gcc[31951] 0.000 0.000 0.024 __cond_resched <- _cond_resched <- wait_for_completion <- stop_one_cpu <- sched_exec 1.874603 [0010] migration/10[59] 3.350 0.004 0.011 smpboot_thread_fn <- kthread <- ret_from_fork 1.874604 [0011] <idle> 1.148 0.000 0.035 cpu_startup_entry <- start_secondary 1.874723 [0005] <idle> 0.016 0.000 1.383 cpu_startup_entry <- start_secondary 1.874746 [0005] gcc[31949] 0.153 0.078 0.022 do_wait sys_wait4 <- system_call_fastpath <- __GI___waitpid --no-call-graph can be used to not show the callchains. --max-stack is used to control the number of frames shown (default of 5). -x/--excl options can be used to collapse redundant callchains to get more relevant data on screen. Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Ingo Molnar <mingo@kernel.org> Acked-by: Jiri Olsa <jolsa@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/20161116060634.28477-7-namhyung@kernel.org [ Add documentation based on above commit message ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-11-16 14:06:32 +08:00
}
perf sched timehist: Mark schedule function in callchains The sched_switch event always captured from the scheduler function. So it'd be great omit them from the callchain. This patch marks the functions to be omitted by later patch. Committer notes: Testing it: Before: [root@jouet experimental]# perf sched record -g ls Dockerfile perf.data x-mips64 [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 1.355 MB perf.data (29 samples) ] [root@jouet experimental]# perf sched timehist time cpu task name wait time sch delay run time [tid/pid] (msec) (msec) (msec) ----------- ----- ----------------- ------ ------ ------ 6.494998 [001] <idle> 0.000 0.000 0.000 6.495027 [002] perf[519] 0.000 0.000 0.000 __schedule <- schedule <- schedule_hrtimeout_range_clock <- schedule_hrtimeou 6.495096 [003] <idle> 0.000 0.000 0.000 6.495100 [003] rcuos/0[9] 0.000 0.005 0.003 __schedule <- schedule <- rcu_nocb_kthread <- kthread <- ret_from_fork 6.495113 [001] perf[520] 0.000 0.008 0.114 __schedule <- preempt_schedule_common <- _cond_resched <- wait_for_completion 6.495121 [000] <idle> 0.000 0.000 0.000 6.495129 [001] migration/1[17] 0.000 0.003 0.016 __schedule <- schedule <- smpboot_thread_fn <- kthread <- ret_from_fork 6.496085 [002] <idle> 0.000 0.000 1.057 6.496096 [002] kworker/u16:1[31169] 0.000 0.004 0.011 __schedule <- schedule <- worker_thread <- kthread <- ret_from_fork 6.496096 [003] <idle> 0.003 0.000 0.996 6.496169 [002] <idle> 0.011 0.000 0.072 6.496171 [000] ls[520] 0.008 0.000 1.049 __schedule <- schedule <- do_exit <- do_group_exit <- [unknown] 6.496172 [003] gnome-terminal-[4391] 0.000 0.003 0.076 __schedule <- schedule <- schedule_hrtimeout_range_clock <- schedule_hrtimeo After: [root@jouet experimental]# perf sched timehist time cpu task name wait time sch delay run time [tid/pid] (msec) (msec) (msec) ----------- ----- ----------------- ----- ----- ------ 6.494998 [001] <idle> 0.000 0.000 0.000 6.495027 [002] perf[519] 0.000 0.000 0.000 schedule_hrtimeout_range_clock <- schedule_hrtimeout_range <- poll_schedule_t 6.495096 [003] <idle> 0.000 0.000 0.000 6.495100 [003] rcuos/0[9] 0.000 0.005 0.003 rcu_nocb_kthread <- kthread <- ret_from_fork 6.495113 [001] perf[520] 0.000 0.008 0.114 preempt_schedule_common <- _cond_resched <- wait_for_completion <- stop_one_c 6.495121 [000] <idle> 0.000 0.000 0.000 6.495129 [001] migration/1[17] 0.000 0.003 0.016 smpboot_thread_fn <- kthread <- ret_from_fork 6.496085 [002] <idle> 0.000 0.000 1.057 6.496096 [002] kworker/u16:1[31169] 0.000 0.004 0.011 worker_thread <- kthread <- ret_from_fork 6.496096 [003] <idle> 0.003 0.000 0.996 6.496169 [002] <idle> 0.011 0.000 0.072 6.496171 [000] ls[520] 0.008 0.000 1.049 do_exit <- do_group_exit <- [unknown] 6.496172 [003] gnome-terminal-[4391] 0.000 0.003 0.076 schedule_hrtimeout_range_clock <- schedule_hrtimeout_range <- poll_schedule_ [root@jouet experimental]# Signed-off-by: Namhyung Kim <namhyung@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/20161124011114.7102-1-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-11-24 09:11:12 +08:00
perf sched timehist: Add call graph options If callchains were recorded they are appended to the line with a default stack depth of 5: 1.874569 [0011] gcc[31949] 0.014 0.000 1.148 wait_for_completion_killable <- do_fork <- sys_vfork <- stub_vfork <- __vfork 1.874591 [0010] gcc[31951] 0.000 0.000 0.024 __cond_resched <- _cond_resched <- wait_for_completion <- stop_one_cpu <- sched_exec 1.874603 [0010] migration/10[59] 3.350 0.004 0.011 smpboot_thread_fn <- kthread <- ret_from_fork 1.874604 [0011] <idle> 1.148 0.000 0.035 cpu_startup_entry <- start_secondary 1.874723 [0005] <idle> 0.016 0.000 1.383 cpu_startup_entry <- start_secondary 1.874746 [0005] gcc[31949] 0.153 0.078 0.022 do_wait sys_wait4 <- system_call_fastpath <- __GI___waitpid --no-call-graph can be used to not show the callchains. --max-stack is used to control the number of frames shown (default of 5). -x/--excl options can be used to collapse redundant callchains to get more relevant data on screen. Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Ingo Molnar <mingo@kernel.org> Acked-by: Jiri Olsa <jolsa@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/20161116060634.28477-7-namhyung@kernel.org [ Add documentation based on above commit message ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-11-16 14:06:32 +08:00
callchain_cursor_commit(cursor);
perf sched timehist: Mark schedule function in callchains The sched_switch event always captured from the scheduler function. So it'd be great omit them from the callchain. This patch marks the functions to be omitted by later patch. Committer notes: Testing it: Before: [root@jouet experimental]# perf sched record -g ls Dockerfile perf.data x-mips64 [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 1.355 MB perf.data (29 samples) ] [root@jouet experimental]# perf sched timehist time cpu task name wait time sch delay run time [tid/pid] (msec) (msec) (msec) ----------- ----- ----------------- ------ ------ ------ 6.494998 [001] <idle> 0.000 0.000 0.000 6.495027 [002] perf[519] 0.000 0.000 0.000 __schedule <- schedule <- schedule_hrtimeout_range_clock <- schedule_hrtimeou 6.495096 [003] <idle> 0.000 0.000 0.000 6.495100 [003] rcuos/0[9] 0.000 0.005 0.003 __schedule <- schedule <- rcu_nocb_kthread <- kthread <- ret_from_fork 6.495113 [001] perf[520] 0.000 0.008 0.114 __schedule <- preempt_schedule_common <- _cond_resched <- wait_for_completion 6.495121 [000] <idle> 0.000 0.000 0.000 6.495129 [001] migration/1[17] 0.000 0.003 0.016 __schedule <- schedule <- smpboot_thread_fn <- kthread <- ret_from_fork 6.496085 [002] <idle> 0.000 0.000 1.057 6.496096 [002] kworker/u16:1[31169] 0.000 0.004 0.011 __schedule <- schedule <- worker_thread <- kthread <- ret_from_fork 6.496096 [003] <idle> 0.003 0.000 0.996 6.496169 [002] <idle> 0.011 0.000 0.072 6.496171 [000] ls[520] 0.008 0.000 1.049 __schedule <- schedule <- do_exit <- do_group_exit <- [unknown] 6.496172 [003] gnome-terminal-[4391] 0.000 0.003 0.076 __schedule <- schedule <- schedule_hrtimeout_range_clock <- schedule_hrtimeo After: [root@jouet experimental]# perf sched timehist time cpu task name wait time sch delay run time [tid/pid] (msec) (msec) (msec) ----------- ----- ----------------- ----- ----- ------ 6.494998 [001] <idle> 0.000 0.000 0.000 6.495027 [002] perf[519] 0.000 0.000 0.000 schedule_hrtimeout_range_clock <- schedule_hrtimeout_range <- poll_schedule_t 6.495096 [003] <idle> 0.000 0.000 0.000 6.495100 [003] rcuos/0[9] 0.000 0.005 0.003 rcu_nocb_kthread <- kthread <- ret_from_fork 6.495113 [001] perf[520] 0.000 0.008 0.114 preempt_schedule_common <- _cond_resched <- wait_for_completion <- stop_one_c 6.495121 [000] <idle> 0.000 0.000 0.000 6.495129 [001] migration/1[17] 0.000 0.003 0.016 smpboot_thread_fn <- kthread <- ret_from_fork 6.496085 [002] <idle> 0.000 0.000 1.057 6.496096 [002] kworker/u16:1[31169] 0.000 0.004 0.011 worker_thread <- kthread <- ret_from_fork 6.496096 [003] <idle> 0.003 0.000 0.996 6.496169 [002] <idle> 0.011 0.000 0.072 6.496171 [000] ls[520] 0.008 0.000 1.049 do_exit <- do_group_exit <- [unknown] 6.496172 [003] gnome-terminal-[4391] 0.000 0.003 0.076 schedule_hrtimeout_range_clock <- schedule_hrtimeout_range <- poll_schedule_ [root@jouet experimental]# Signed-off-by: Namhyung Kim <namhyung@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/20161124011114.7102-1-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-11-24 09:11:12 +08:00
while (true) {
struct callchain_cursor_node *node;
struct symbol *sym;
node = callchain_cursor_current(cursor);
if (node == NULL)
break;
sym = node->sym;
if (sym) {
perf sched timehist: Mark schedule function in callchains The sched_switch event always captured from the scheduler function. So it'd be great omit them from the callchain. This patch marks the functions to be omitted by later patch. Committer notes: Testing it: Before: [root@jouet experimental]# perf sched record -g ls Dockerfile perf.data x-mips64 [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 1.355 MB perf.data (29 samples) ] [root@jouet experimental]# perf sched timehist time cpu task name wait time sch delay run time [tid/pid] (msec) (msec) (msec) ----------- ----- ----------------- ------ ------ ------ 6.494998 [001] <idle> 0.000 0.000 0.000 6.495027 [002] perf[519] 0.000 0.000 0.000 __schedule <- schedule <- schedule_hrtimeout_range_clock <- schedule_hrtimeou 6.495096 [003] <idle> 0.000 0.000 0.000 6.495100 [003] rcuos/0[9] 0.000 0.005 0.003 __schedule <- schedule <- rcu_nocb_kthread <- kthread <- ret_from_fork 6.495113 [001] perf[520] 0.000 0.008 0.114 __schedule <- preempt_schedule_common <- _cond_resched <- wait_for_completion 6.495121 [000] <idle> 0.000 0.000 0.000 6.495129 [001] migration/1[17] 0.000 0.003 0.016 __schedule <- schedule <- smpboot_thread_fn <- kthread <- ret_from_fork 6.496085 [002] <idle> 0.000 0.000 1.057 6.496096 [002] kworker/u16:1[31169] 0.000 0.004 0.011 __schedule <- schedule <- worker_thread <- kthread <- ret_from_fork 6.496096 [003] <idle> 0.003 0.000 0.996 6.496169 [002] <idle> 0.011 0.000 0.072 6.496171 [000] ls[520] 0.008 0.000 1.049 __schedule <- schedule <- do_exit <- do_group_exit <- [unknown] 6.496172 [003] gnome-terminal-[4391] 0.000 0.003 0.076 __schedule <- schedule <- schedule_hrtimeout_range_clock <- schedule_hrtimeo After: [root@jouet experimental]# perf sched timehist time cpu task name wait time sch delay run time [tid/pid] (msec) (msec) (msec) ----------- ----- ----------------- ----- ----- ------ 6.494998 [001] <idle> 0.000 0.000 0.000 6.495027 [002] perf[519] 0.000 0.000 0.000 schedule_hrtimeout_range_clock <- schedule_hrtimeout_range <- poll_schedule_t 6.495096 [003] <idle> 0.000 0.000 0.000 6.495100 [003] rcuos/0[9] 0.000 0.005 0.003 rcu_nocb_kthread <- kthread <- ret_from_fork 6.495113 [001] perf[520] 0.000 0.008 0.114 preempt_schedule_common <- _cond_resched <- wait_for_completion <- stop_one_c 6.495121 [000] <idle> 0.000 0.000 0.000 6.495129 [001] migration/1[17] 0.000 0.003 0.016 smpboot_thread_fn <- kthread <- ret_from_fork 6.496085 [002] <idle> 0.000 0.000 1.057 6.496096 [002] kworker/u16:1[31169] 0.000 0.004 0.011 worker_thread <- kthread <- ret_from_fork 6.496096 [003] <idle> 0.003 0.000 0.996 6.496169 [002] <idle> 0.011 0.000 0.072 6.496171 [000] ls[520] 0.008 0.000 1.049 do_exit <- do_group_exit <- [unknown] 6.496172 [003] gnome-terminal-[4391] 0.000 0.003 0.076 schedule_hrtimeout_range_clock <- schedule_hrtimeout_range <- poll_schedule_ [root@jouet experimental]# Signed-off-by: Namhyung Kim <namhyung@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/20161124011114.7102-1-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-11-24 09:11:12 +08:00
if (!strcmp(sym->name, "schedule") ||
!strcmp(sym->name, "__schedule") ||
!strcmp(sym->name, "preempt_schedule"))
sym->ignore = 1;
}
callchain_cursor_advance(cursor);
}
}
static int init_idle_thread(struct thread *thread)
{
struct idle_thread_runtime *itr;
thread__set_comm(thread, idle_comm, 0);
itr = zalloc(sizeof(*itr));
if (itr == NULL)
return -ENOMEM;
init_stats(&itr->tr.run_stats);
callchain_init(&itr->callchain);
callchain_cursor_reset(&itr->cursor);
thread__set_priv(thread, itr);
return 0;
}
/*
* Track idle stats per cpu by maintaining a local thread
* struct for the idle task on each cpu.
*/
static int init_idle_threads(int ncpu)
{
int i, ret;
idle_threads = zalloc(ncpu * sizeof(struct thread *));
if (!idle_threads)
return -ENOMEM;
idle_max_cpu = ncpu;
/* allocate the actual thread struct if needed */
for (i = 0; i < ncpu; ++i) {
idle_threads[i] = thread__new(0, 0);
if (idle_threads[i] == NULL)
return -ENOMEM;
ret = init_idle_thread(idle_threads[i]);
if (ret < 0)
return ret;
}
return 0;
}
static void free_idle_threads(void)
{
int i;
if (idle_threads == NULL)
return;
for (i = 0; i < idle_max_cpu; ++i) {
if ((idle_threads[i]))
thread__delete(idle_threads[i]);
}
free(idle_threads);
}
static struct thread *get_idle_thread(int cpu)
{
/*
* expand/allocate array of pointers to local thread
* structs if needed
*/
if ((cpu >= idle_max_cpu) || (idle_threads == NULL)) {
int i, j = __roundup_pow_of_two(cpu+1);
void *p;
p = realloc(idle_threads, j * sizeof(struct thread *));
if (!p)
return NULL;
idle_threads = (struct thread **) p;
for (i = idle_max_cpu; i < j; ++i)
idle_threads[i] = NULL;
idle_max_cpu = j;
}
/* allocate a new thread struct if needed */
if (idle_threads[cpu] == NULL) {
idle_threads[cpu] = thread__new(0, 0);
if (idle_threads[cpu]) {
if (init_idle_thread(idle_threads[cpu]) < 0)
return NULL;
}
}
return idle_threads[cpu];
}
static void save_idle_callchain(struct perf_sched *sched,
struct idle_thread_runtime *itr,
struct perf_sample *sample)
{
if (!sched->show_callchain || sample->callchain == NULL)
return;
callchain_cursor__copy(&itr->cursor, &callchain_cursor);
}
perf sched timehist: Add call graph options If callchains were recorded they are appended to the line with a default stack depth of 5: 1.874569 [0011] gcc[31949] 0.014 0.000 1.148 wait_for_completion_killable <- do_fork <- sys_vfork <- stub_vfork <- __vfork 1.874591 [0010] gcc[31951] 0.000 0.000 0.024 __cond_resched <- _cond_resched <- wait_for_completion <- stop_one_cpu <- sched_exec 1.874603 [0010] migration/10[59] 3.350 0.004 0.011 smpboot_thread_fn <- kthread <- ret_from_fork 1.874604 [0011] <idle> 1.148 0.000 0.035 cpu_startup_entry <- start_secondary 1.874723 [0005] <idle> 0.016 0.000 1.383 cpu_startup_entry <- start_secondary 1.874746 [0005] gcc[31949] 0.153 0.078 0.022 do_wait sys_wait4 <- system_call_fastpath <- __GI___waitpid --no-call-graph can be used to not show the callchains. --max-stack is used to control the number of frames shown (default of 5). -x/--excl options can be used to collapse redundant callchains to get more relevant data on screen. Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Ingo Molnar <mingo@kernel.org> Acked-by: Jiri Olsa <jolsa@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/20161116060634.28477-7-namhyung@kernel.org [ Add documentation based on above commit message ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-11-16 14:06:32 +08:00
static struct thread *timehist_get_thread(struct perf_sched *sched,
struct perf_sample *sample,
struct machine *machine,
struct evsel *evsel)
{
struct thread *thread;
if (is_idle_sample(sample, evsel)) {
thread = get_idle_thread(sample->cpu);
if (thread == NULL)
pr_err("Failed to get idle thread for cpu %d.\n", sample->cpu);
} else {
/* there were samples with tid 0 but non-zero pid */
thread = machine__findnew_thread(machine, sample->pid,
sample->tid ?: sample->pid);
if (thread == NULL) {
pr_debug("Failed to get thread for tid %d. skipping sample.\n",
sample->tid);
}
save_task_callchain(sched, sample, evsel, machine);
if (sched->idle_hist) {
struct thread *idle;
struct idle_thread_runtime *itr;
idle = get_idle_thread(sample->cpu);
if (idle == NULL) {
pr_err("Failed to get idle thread for cpu %d.\n", sample->cpu);
return NULL;
}
itr = thread__priv(idle);
if (itr == NULL)
return NULL;
itr->last_thread = thread;
/* copy task callchain when entering to idle */
if (perf_evsel__intval(evsel, sample, "next_pid") == 0)
save_idle_callchain(sched, itr, sample);
}
}
return thread;
}
perf sched timehist: Add summary options The -s/--summary option is to show process runtime statistics. And the -S/--with-summary option is to show the stats with the normal output. $ perf sched timehist -s Runtime summary comm parent sched-in run-time min-run avg-run max-run stddev (count) (msec) (msec) (msec) (msec) % --------------------------------------------------------------------------------------------------------- ksoftirqd/0[3] 2 2 0.011 0.004 0.005 0.006 14.87 rcu_preempt[7] 2 11 0.071 0.002 0.006 0.017 20.23 watchdog/0[11] 2 1 0.002 0.002 0.002 0.002 0.00 watchdog/1[12] 2 1 0.004 0.004 0.004 0.004 0.00 ... Terminated tasks: sleep[7220] 7219 3 0.770 0.087 0.256 0.576 62.28 Idle stats: CPU 0 idle for 2352.006 msec CPU 1 idle for 2764.497 msec CPU 2 idle for 2998.229 msec CPU 3 idle for 2967.800 msec Total number of unique tasks: 52 Total number of context switches: 2532 Total run time (msec): 218.036 Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Ingo Molnar <mingo@kernel.org> Acked-by: Jiri Olsa <jolsa@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/20161116060634.28477-5-namhyung@kernel.org [ Add documentation from last commit, so that docs comes with the cset that introduces the feature ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-11-16 14:06:30 +08:00
static bool timehist_skip_sample(struct perf_sched *sched,
struct thread *thread,
struct evsel *evsel,
struct perf_sample *sample)
{
bool rc = false;
perf sched timehist: Add summary options The -s/--summary option is to show process runtime statistics. And the -S/--with-summary option is to show the stats with the normal output. $ perf sched timehist -s Runtime summary comm parent sched-in run-time min-run avg-run max-run stddev (count) (msec) (msec) (msec) (msec) % --------------------------------------------------------------------------------------------------------- ksoftirqd/0[3] 2 2 0.011 0.004 0.005 0.006 14.87 rcu_preempt[7] 2 11 0.071 0.002 0.006 0.017 20.23 watchdog/0[11] 2 1 0.002 0.002 0.002 0.002 0.00 watchdog/1[12] 2 1 0.004 0.004 0.004 0.004 0.00 ... Terminated tasks: sleep[7220] 7219 3 0.770 0.087 0.256 0.576 62.28 Idle stats: CPU 0 idle for 2352.006 msec CPU 1 idle for 2764.497 msec CPU 2 idle for 2998.229 msec CPU 3 idle for 2967.800 msec Total number of unique tasks: 52 Total number of context switches: 2532 Total run time (msec): 218.036 Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Ingo Molnar <mingo@kernel.org> Acked-by: Jiri Olsa <jolsa@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/20161116060634.28477-5-namhyung@kernel.org [ Add documentation from last commit, so that docs comes with the cset that introduces the feature ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-11-16 14:06:30 +08:00
if (thread__is_filtered(thread)) {
rc = true;
perf sched timehist: Add summary options The -s/--summary option is to show process runtime statistics. And the -S/--with-summary option is to show the stats with the normal output. $ perf sched timehist -s Runtime summary comm parent sched-in run-time min-run avg-run max-run stddev (count) (msec) (msec) (msec) (msec) % --------------------------------------------------------------------------------------------------------- ksoftirqd/0[3] 2 2 0.011 0.004 0.005 0.006 14.87 rcu_preempt[7] 2 11 0.071 0.002 0.006 0.017 20.23 watchdog/0[11] 2 1 0.002 0.002 0.002 0.002 0.00 watchdog/1[12] 2 1 0.004 0.004 0.004 0.004 0.00 ... Terminated tasks: sleep[7220] 7219 3 0.770 0.087 0.256 0.576 62.28 Idle stats: CPU 0 idle for 2352.006 msec CPU 1 idle for 2764.497 msec CPU 2 idle for 2998.229 msec CPU 3 idle for 2967.800 msec Total number of unique tasks: 52 Total number of context switches: 2532 Total run time (msec): 218.036 Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Ingo Molnar <mingo@kernel.org> Acked-by: Jiri Olsa <jolsa@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/20161116060634.28477-5-namhyung@kernel.org [ Add documentation from last commit, so that docs comes with the cset that introduces the feature ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-11-16 14:06:30 +08:00
sched->skipped_samples++;
}
if (sched->idle_hist) {
if (strcmp(perf_evsel__name(evsel), "sched:sched_switch"))
rc = true;
else if (perf_evsel__intval(evsel, sample, "prev_pid") != 0 &&
perf_evsel__intval(evsel, sample, "next_pid") != 0)
rc = true;
}
return rc;
}
static void timehist_print_wakeup_event(struct perf_sched *sched,
struct evsel *evsel,
struct perf_sample *sample,
struct machine *machine,
struct thread *awakened)
{
struct thread *thread;
char tstr[64];
thread = machine__findnew_thread(machine, sample->pid, sample->tid);
if (thread == NULL)
return;
/* show wakeup unless both awakee and awaker are filtered */
if (timehist_skip_sample(sched, thread, evsel, sample) &&
timehist_skip_sample(sched, awakened, evsel, sample)) {
return;
}
timestamp__scnprintf_usec(sample->time, tstr, sizeof(tstr));
printf("%15s [%04d] ", tstr, sample->cpu);
if (sched->show_cpu_visual)
printf(" %*s ", sched->max_cpu + 1, "");
printf(" %-*s ", comm_width, timehist_get_commstr(thread));
/* dt spacer */
printf(" %9s %9s %9s ", "", "", "");
printf("awakened: %s", timehist_get_commstr(awakened));
printf("\n");
}
static int timehist_sched_wakeup_event(struct perf_tool *tool,
union perf_event *event __maybe_unused,
struct evsel *evsel,
struct perf_sample *sample,
struct machine *machine)
{
struct perf_sched *sched = container_of(tool, struct perf_sched, tool);
struct thread *thread;
struct thread_runtime *tr = NULL;
/* want pid of awakened task not pid in sample */
const u32 pid = perf_evsel__intval(evsel, sample, "pid");
thread = machine__findnew_thread(machine, 0, pid);
if (thread == NULL)
return -1;
tr = thread__get_runtime(thread);
if (tr == NULL)
return -1;
if (tr->ready_to_run == 0)
tr->ready_to_run = sample->time;
/* show wakeups if requested */
perf sched timehist: Add option to specify time window of interest Add option to allow user to control analysis window. e.g., collect data for time window and analyze a segment of interest within that window. Committer notes: Testing it: # perf sched record -a usleep 1 [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 1.593 MB perf.data (25 samples) ] # # perf sched timehist | head -18 Samples do not have callchains. time cpu task name wait time sch delay run time [tid/pid] (msec) (msec) (msec) ------------- ------ --------------- --------- --------- -------- 19818.635579 [0002] <idle> 0.000 0.000 0.000 19818.635613 [0000] perf[9116] 0.000 0.000 0.000 19818.635676 [0000] <idle> 0.000 0.000 0.063 19818.635678 [0000] rcuos/2[29] 0.000 0.002 0.001 19818.635696 [0002] perf[9117] 0.000 0.004 0.116 19818.635702 [0000] <idle> 0.001 0.000 0.024 19818.635709 [0002] migration/2[25] 0.000 0.003 0.012 19818.636263 [0000] usleep[9117] 0.005 0.000 0.560 19818.636316 [0000] <idle> 0.560 0.000 0.053 19818.636358 [0002] <idle> 0.129 0.000 0.649 19818.636358 [0000] usleep[9117] 0.053 0.002 0.042 # # perf sched timehist --time 19818.635696, Samples do not have callchains. time cpu task name wait time sch delay run time [tid/pid] (msec) (msec) (msec) ------------- ------ --------------- -------- --------- --------- 19818.635696 [0002] perf[9117] 0.000 0.120 0.000 19818.635702 [0000] <idle> 0.019 0.000 0.006 19818.635709 [0002] migration/2[25] 0.000 0.003 0.012 19818.636263 [0000] usleep[9117] 0.005 0.000 0.560 19818.636316 [0000] <idle> 0.560 0.000 0.053 19818.636358 [0002] <idle> 0.129 0.000 0.649 19818.636358 [0000] usleep[9117] 0.053 0.002 0.042 # # perf sched timehist --time 19818.635696,19818.635709 Samples do not have callchains. time cpu task name wait time sch delay run time [tid/pid] (msec) (msec) (msec) ------------- ------ --------------- --------- --------- --------- 19818.635696 [0002] perf[9117] 0.000 0.120 0.000 19818.635702 [0000] <idle> 0.019 0.000 0.006 19818.635709 [0002] migration/2[25] 0.000 0.003 0.012 19818.635709 [0000] usleep[9117] 0.005 0.000 0.006 # Signed-off-by: David Ahern <dsahern@gmail.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Acked-by: Namhyung Kim <namhyung@kernel.org> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1480439746-42695-5-git-send-email-dsahern@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-11-30 01:15:44 +08:00
if (sched->show_wakeups &&
!perf_time__skip_sample(&sched->ptime, sample->time))
timehist_print_wakeup_event(sched, evsel, sample, machine, thread);
return 0;
}
static void timehist_print_migration_event(struct perf_sched *sched,
struct evsel *evsel,
struct perf_sample *sample,
struct machine *machine,
struct thread *migrated)
{
struct thread *thread;
char tstr[64];
u32 max_cpus = sched->max_cpu + 1;
u32 ocpu, dcpu;
if (sched->summary_only)
return;
max_cpus = sched->max_cpu + 1;
ocpu = perf_evsel__intval(evsel, sample, "orig_cpu");
dcpu = perf_evsel__intval(evsel, sample, "dest_cpu");
thread = machine__findnew_thread(machine, sample->pid, sample->tid);
if (thread == NULL)
return;
if (timehist_skip_sample(sched, thread, evsel, sample) &&
timehist_skip_sample(sched, migrated, evsel, sample)) {
return;
}
timestamp__scnprintf_usec(sample->time, tstr, sizeof(tstr));
printf("%15s [%04d] ", tstr, sample->cpu);
if (sched->show_cpu_visual) {
u32 i;
char c;
printf(" ");
for (i = 0; i < max_cpus; ++i) {
c = (i == sample->cpu) ? 'm' : ' ';
printf("%c", c);
}
printf(" ");
}
printf(" %-*s ", comm_width, timehist_get_commstr(thread));
/* dt spacer */
printf(" %9s %9s %9s ", "", "", "");
printf("migrated: %s", timehist_get_commstr(migrated));
printf(" cpu %d => %d", ocpu, dcpu);
printf("\n");
}
static int timehist_migrate_task_event(struct perf_tool *tool,
union perf_event *event __maybe_unused,
struct evsel *evsel,
struct perf_sample *sample,
struct machine *machine)
{
struct perf_sched *sched = container_of(tool, struct perf_sched, tool);
struct thread *thread;
struct thread_runtime *tr = NULL;
/* want pid of migrated task not pid in sample */
const u32 pid = perf_evsel__intval(evsel, sample, "pid");
thread = machine__findnew_thread(machine, 0, pid);
if (thread == NULL)
return -1;
tr = thread__get_runtime(thread);
if (tr == NULL)
return -1;
tr->migrations++;
/* show migrations if requested */
timehist_print_migration_event(sched, evsel, sample, machine, thread);
return 0;
}
perf sched timehist: Add summary options The -s/--summary option is to show process runtime statistics. And the -S/--with-summary option is to show the stats with the normal output. $ perf sched timehist -s Runtime summary comm parent sched-in run-time min-run avg-run max-run stddev (count) (msec) (msec) (msec) (msec) % --------------------------------------------------------------------------------------------------------- ksoftirqd/0[3] 2 2 0.011 0.004 0.005 0.006 14.87 rcu_preempt[7] 2 11 0.071 0.002 0.006 0.017 20.23 watchdog/0[11] 2 1 0.002 0.002 0.002 0.002 0.00 watchdog/1[12] 2 1 0.004 0.004 0.004 0.004 0.00 ... Terminated tasks: sleep[7220] 7219 3 0.770 0.087 0.256 0.576 62.28 Idle stats: CPU 0 idle for 2352.006 msec CPU 1 idle for 2764.497 msec CPU 2 idle for 2998.229 msec CPU 3 idle for 2967.800 msec Total number of unique tasks: 52 Total number of context switches: 2532 Total run time (msec): 218.036 Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Ingo Molnar <mingo@kernel.org> Acked-by: Jiri Olsa <jolsa@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/20161116060634.28477-5-namhyung@kernel.org [ Add documentation from last commit, so that docs comes with the cset that introduces the feature ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-11-16 14:06:30 +08:00
static int timehist_sched_change_event(struct perf_tool *tool,
union perf_event *event,
struct evsel *evsel,
struct perf_sample *sample,
struct machine *machine)
{
struct perf_sched *sched = container_of(tool, struct perf_sched, tool);
perf sched timehist: Add option to specify time window of interest Add option to allow user to control analysis window. e.g., collect data for time window and analyze a segment of interest within that window. Committer notes: Testing it: # perf sched record -a usleep 1 [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 1.593 MB perf.data (25 samples) ] # # perf sched timehist | head -18 Samples do not have callchains. time cpu task name wait time sch delay run time [tid/pid] (msec) (msec) (msec) ------------- ------ --------------- --------- --------- -------- 19818.635579 [0002] <idle> 0.000 0.000 0.000 19818.635613 [0000] perf[9116] 0.000 0.000 0.000 19818.635676 [0000] <idle> 0.000 0.000 0.063 19818.635678 [0000] rcuos/2[29] 0.000 0.002 0.001 19818.635696 [0002] perf[9117] 0.000 0.004 0.116 19818.635702 [0000] <idle> 0.001 0.000 0.024 19818.635709 [0002] migration/2[25] 0.000 0.003 0.012 19818.636263 [0000] usleep[9117] 0.005 0.000 0.560 19818.636316 [0000] <idle> 0.560 0.000 0.053 19818.636358 [0002] <idle> 0.129 0.000 0.649 19818.636358 [0000] usleep[9117] 0.053 0.002 0.042 # # perf sched timehist --time 19818.635696, Samples do not have callchains. time cpu task name wait time sch delay run time [tid/pid] (msec) (msec) (msec) ------------- ------ --------------- -------- --------- --------- 19818.635696 [0002] perf[9117] 0.000 0.120 0.000 19818.635702 [0000] <idle> 0.019 0.000 0.006 19818.635709 [0002] migration/2[25] 0.000 0.003 0.012 19818.636263 [0000] usleep[9117] 0.005 0.000 0.560 19818.636316 [0000] <idle> 0.560 0.000 0.053 19818.636358 [0002] <idle> 0.129 0.000 0.649 19818.636358 [0000] usleep[9117] 0.053 0.002 0.042 # # perf sched timehist --time 19818.635696,19818.635709 Samples do not have callchains. time cpu task name wait time sch delay run time [tid/pid] (msec) (msec) (msec) ------------- ------ --------------- --------- --------- --------- 19818.635696 [0002] perf[9117] 0.000 0.120 0.000 19818.635702 [0000] <idle> 0.019 0.000 0.006 19818.635709 [0002] migration/2[25] 0.000 0.003 0.012 19818.635709 [0000] usleep[9117] 0.005 0.000 0.006 # Signed-off-by: David Ahern <dsahern@gmail.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Acked-by: Namhyung Kim <namhyung@kernel.org> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1480439746-42695-5-git-send-email-dsahern@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-11-30 01:15:44 +08:00
struct perf_time_interval *ptime = &sched->ptime;
struct addr_location al;
struct thread *thread;
struct thread_runtime *tr = NULL;
perf sched timehist: Add option to specify time window of interest Add option to allow user to control analysis window. e.g., collect data for time window and analyze a segment of interest within that window. Committer notes: Testing it: # perf sched record -a usleep 1 [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 1.593 MB perf.data (25 samples) ] # # perf sched timehist | head -18 Samples do not have callchains. time cpu task name wait time sch delay run time [tid/pid] (msec) (msec) (msec) ------------- ------ --------------- --------- --------- -------- 19818.635579 [0002] <idle> 0.000 0.000 0.000 19818.635613 [0000] perf[9116] 0.000 0.000 0.000 19818.635676 [0000] <idle> 0.000 0.000 0.063 19818.635678 [0000] rcuos/2[29] 0.000 0.002 0.001 19818.635696 [0002] perf[9117] 0.000 0.004 0.116 19818.635702 [0000] <idle> 0.001 0.000 0.024 19818.635709 [0002] migration/2[25] 0.000 0.003 0.012 19818.636263 [0000] usleep[9117] 0.005 0.000 0.560 19818.636316 [0000] <idle> 0.560 0.000 0.053 19818.636358 [0002] <idle> 0.129 0.000 0.649 19818.636358 [0000] usleep[9117] 0.053 0.002 0.042 # # perf sched timehist --time 19818.635696, Samples do not have callchains. time cpu task name wait time sch delay run time [tid/pid] (msec) (msec) (msec) ------------- ------ --------------- -------- --------- --------- 19818.635696 [0002] perf[9117] 0.000 0.120 0.000 19818.635702 [0000] <idle> 0.019 0.000 0.006 19818.635709 [0002] migration/2[25] 0.000 0.003 0.012 19818.636263 [0000] usleep[9117] 0.005 0.000 0.560 19818.636316 [0000] <idle> 0.560 0.000 0.053 19818.636358 [0002] <idle> 0.129 0.000 0.649 19818.636358 [0000] usleep[9117] 0.053 0.002 0.042 # # perf sched timehist --time 19818.635696,19818.635709 Samples do not have callchains. time cpu task name wait time sch delay run time [tid/pid] (msec) (msec) (msec) ------------- ------ --------------- --------- --------- --------- 19818.635696 [0002] perf[9117] 0.000 0.120 0.000 19818.635702 [0000] <idle> 0.019 0.000 0.006 19818.635709 [0002] migration/2[25] 0.000 0.003 0.012 19818.635709 [0000] usleep[9117] 0.005 0.000 0.006 # Signed-off-by: David Ahern <dsahern@gmail.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Acked-by: Namhyung Kim <namhyung@kernel.org> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1480439746-42695-5-git-send-email-dsahern@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-11-30 01:15:44 +08:00
u64 tprev, t = sample->time;
int rc = 0;
int state = perf_evsel__intval(evsel, sample, "prev_state");
if (machine__resolve(machine, &al, sample) < 0) {
pr_err("problem processing %d event. skipping it\n",
event->header.type);
rc = -1;
goto out;
}
perf sched timehist: Add call graph options If callchains were recorded they are appended to the line with a default stack depth of 5: 1.874569 [0011] gcc[31949] 0.014 0.000 1.148 wait_for_completion_killable <- do_fork <- sys_vfork <- stub_vfork <- __vfork 1.874591 [0010] gcc[31951] 0.000 0.000 0.024 __cond_resched <- _cond_resched <- wait_for_completion <- stop_one_cpu <- sched_exec 1.874603 [0010] migration/10[59] 3.350 0.004 0.011 smpboot_thread_fn <- kthread <- ret_from_fork 1.874604 [0011] <idle> 1.148 0.000 0.035 cpu_startup_entry <- start_secondary 1.874723 [0005] <idle> 0.016 0.000 1.383 cpu_startup_entry <- start_secondary 1.874746 [0005] gcc[31949] 0.153 0.078 0.022 do_wait sys_wait4 <- system_call_fastpath <- __GI___waitpid --no-call-graph can be used to not show the callchains. --max-stack is used to control the number of frames shown (default of 5). -x/--excl options can be used to collapse redundant callchains to get more relevant data on screen. Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Ingo Molnar <mingo@kernel.org> Acked-by: Jiri Olsa <jolsa@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/20161116060634.28477-7-namhyung@kernel.org [ Add documentation based on above commit message ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-11-16 14:06:32 +08:00
thread = timehist_get_thread(sched, sample, machine, evsel);
if (thread == NULL) {
rc = -1;
goto out;
}
if (timehist_skip_sample(sched, thread, evsel, sample))
goto out;
tr = thread__get_runtime(thread);
if (tr == NULL) {
rc = -1;
goto out;
}
tprev = perf_evsel__get_time(evsel, sample->cpu);
perf sched timehist: Add option to specify time window of interest Add option to allow user to control analysis window. e.g., collect data for time window and analyze a segment of interest within that window. Committer notes: Testing it: # perf sched record -a usleep 1 [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 1.593 MB perf.data (25 samples) ] # # perf sched timehist | head -18 Samples do not have callchains. time cpu task name wait time sch delay run time [tid/pid] (msec) (msec) (msec) ------------- ------ --------------- --------- --------- -------- 19818.635579 [0002] <idle> 0.000 0.000 0.000 19818.635613 [0000] perf[9116] 0.000 0.000 0.000 19818.635676 [0000] <idle> 0.000 0.000 0.063 19818.635678 [0000] rcuos/2[29] 0.000 0.002 0.001 19818.635696 [0002] perf[9117] 0.000 0.004 0.116 19818.635702 [0000] <idle> 0.001 0.000 0.024 19818.635709 [0002] migration/2[25] 0.000 0.003 0.012 19818.636263 [0000] usleep[9117] 0.005 0.000 0.560 19818.636316 [0000] <idle> 0.560 0.000 0.053 19818.636358 [0002] <idle> 0.129 0.000 0.649 19818.636358 [0000] usleep[9117] 0.053 0.002 0.042 # # perf sched timehist --time 19818.635696, Samples do not have callchains. time cpu task name wait time sch delay run time [tid/pid] (msec) (msec) (msec) ------------- ------ --------------- -------- --------- --------- 19818.635696 [0002] perf[9117] 0.000 0.120 0.000 19818.635702 [0000] <idle> 0.019 0.000 0.006 19818.635709 [0002] migration/2[25] 0.000 0.003 0.012 19818.636263 [0000] usleep[9117] 0.005 0.000 0.560 19818.636316 [0000] <idle> 0.560 0.000 0.053 19818.636358 [0002] <idle> 0.129 0.000 0.649 19818.636358 [0000] usleep[9117] 0.053 0.002 0.042 # # perf sched timehist --time 19818.635696,19818.635709 Samples do not have callchains. time cpu task name wait time sch delay run time [tid/pid] (msec) (msec) (msec) ------------- ------ --------------- --------- --------- --------- 19818.635696 [0002] perf[9117] 0.000 0.120 0.000 19818.635702 [0000] <idle> 0.019 0.000 0.006 19818.635709 [0002] migration/2[25] 0.000 0.003 0.012 19818.635709 [0000] usleep[9117] 0.005 0.000 0.006 # Signed-off-by: David Ahern <dsahern@gmail.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Acked-by: Namhyung Kim <namhyung@kernel.org> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1480439746-42695-5-git-send-email-dsahern@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-11-30 01:15:44 +08:00
/*
* If start time given:
* - sample time is under window user cares about - skip sample
* - tprev is under window user cares about - reset to start of window
*/
if (ptime->start && ptime->start > t)
goto out;
perf sched timehist: Fix invalid period calculation When --time option is given with a value outside recorded time, the last sample time (tprev) was set to that value and run time calculation might be incorrect. This is a problem of the first samples for each cpus since it would skip the runtime update when tprev is 0. But with --time option it had non-zero (which is invalid) value so the calculation is also incorrect. For example, let's see the followging: $ perf sched timehist time cpu task name wait time sch delay run time [tid/pid] (msec) (msec) (msec) --------------- ------ ------------------------------ --------- --------- --------- 3195.968367 [0003] <idle> 0.000 0.000 0.000 3195.968386 [0002] Timer[4306/4277] 0.000 0.000 0.018 3195.968397 [0002] Web Content[4277] 0.000 0.000 0.000 3195.968595 [0001] JS Helper[4302/4277] 0.000 0.000 0.000 3195.969217 [0000] <idle> 0.000 0.000 0.621 3195.969251 [0001] kworker/1:1H[291] 0.000 0.000 0.033 The sample starts at 3195.968367 but when I gave a time interval from 3194 to 3196 (in sec) it will calculate the whole 2 second as runtime. In below, 2 cpus accounted it as runtime, other 2 cpus accounted it as idle time. Before: $ perf sched timehist --time 3194,3196 -s | tail Idle stats: CPU 0 idle for 1995.991 msec CPU 1 idle for 20.793 msec CPU 2 idle for 30.191 msec CPU 3 idle for 1999.852 msec Total number of unique tasks: 23 Total number of context switches: 128 Total run time (msec): 3724.940 After: $ perf sched timehist --time 3194,3196 -s | tail Idle stats: CPU 0 idle for 10.811 msec CPU 1 idle for 20.793 msec CPU 2 idle for 30.191 msec CPU 3 idle for 18.337 msec Total number of unique tasks: 23 Total number of context switches: 128 Total run time (msec): 18.139 Committer notes: Further testing: Before: Idle stats: CPU 0 idle for 229.785 msec CPU 1 idle for 937.944 msec CPU 2 idle for 188.931 msec CPU 3 idle for 986.185 msec After: # perf sched timehist --time 40602,40603 -s | tail Idle stats: CPU 0 idle for 229.785 msec CPU 1 idle for 175.407 msec CPU 2 idle for 188.931 msec CPU 3 idle for 223.657 msec Total number of unique tasks: 68 Total number of context switches: 814 Total run time (msec): 97.688 # for cpu in `seq 0 3` ; do echo -n "CPU $cpu idle for " ; perf sched timehist --time 40602,40603 | grep "\[000${cpu}\].*\<idle\>" | tr -s ' ' | cut -d' ' -f7 | awk '{entries++ ; s+=$1} END {print s " msec (entries: " entries ")"}' ; done CPU 0 idle for 229.721 msec (entries: 123) CPU 1 idle for 175.381 msec (entries: 65) CPU 2 idle for 188.903 msec (entries: 56) CPU 3 idle for 223.61 msec (entries: 102) Difference due to the idle stats being accounted at nanoseconds precision while the <idle> entries in 'perf sched timehist' are trucated at msec.usec. Signed-off-by: Namhyung Kim <namhyung@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Fixes: 853b74071110 ("perf sched timehist: Add option to specify time window of interest") Link: http://lkml.kernel.org/r/20161222060350.17655-2-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-12-22 14:03:49 +08:00
if (tprev && ptime->start > tprev)
perf sched timehist: Add option to specify time window of interest Add option to allow user to control analysis window. e.g., collect data for time window and analyze a segment of interest within that window. Committer notes: Testing it: # perf sched record -a usleep 1 [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 1.593 MB perf.data (25 samples) ] # # perf sched timehist | head -18 Samples do not have callchains. time cpu task name wait time sch delay run time [tid/pid] (msec) (msec) (msec) ------------- ------ --------------- --------- --------- -------- 19818.635579 [0002] <idle> 0.000 0.000 0.000 19818.635613 [0000] perf[9116] 0.000 0.000 0.000 19818.635676 [0000] <idle> 0.000 0.000 0.063 19818.635678 [0000] rcuos/2[29] 0.000 0.002 0.001 19818.635696 [0002] perf[9117] 0.000 0.004 0.116 19818.635702 [0000] <idle> 0.001 0.000 0.024 19818.635709 [0002] migration/2[25] 0.000 0.003 0.012 19818.636263 [0000] usleep[9117] 0.005 0.000 0.560 19818.636316 [0000] <idle> 0.560 0.000 0.053 19818.636358 [0002] <idle> 0.129 0.000 0.649 19818.636358 [0000] usleep[9117] 0.053 0.002 0.042 # # perf sched timehist --time 19818.635696, Samples do not have callchains. time cpu task name wait time sch delay run time [tid/pid] (msec) (msec) (msec) ------------- ------ --------------- -------- --------- --------- 19818.635696 [0002] perf[9117] 0.000 0.120 0.000 19818.635702 [0000] <idle> 0.019 0.000 0.006 19818.635709 [0002] migration/2[25] 0.000 0.003 0.012 19818.636263 [0000] usleep[9117] 0.005 0.000 0.560 19818.636316 [0000] <idle> 0.560 0.000 0.053 19818.636358 [0002] <idle> 0.129 0.000 0.649 19818.636358 [0000] usleep[9117] 0.053 0.002 0.042 # # perf sched timehist --time 19818.635696,19818.635709 Samples do not have callchains. time cpu task name wait time sch delay run time [tid/pid] (msec) (msec) (msec) ------------- ------ --------------- --------- --------- --------- 19818.635696 [0002] perf[9117] 0.000 0.120 0.000 19818.635702 [0000] <idle> 0.019 0.000 0.006 19818.635709 [0002] migration/2[25] 0.000 0.003 0.012 19818.635709 [0000] usleep[9117] 0.005 0.000 0.006 # Signed-off-by: David Ahern <dsahern@gmail.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Acked-by: Namhyung Kim <namhyung@kernel.org> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1480439746-42695-5-git-send-email-dsahern@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-11-30 01:15:44 +08:00
tprev = ptime->start;
/*
* If end time given:
* - previous sched event is out of window - we are done
* - sample time is beyond window user cares about - reset it
* to close out stats for time window interest
*/
if (ptime->end) {
if (tprev > ptime->end)
goto out;
if (t > ptime->end)
t = ptime->end;
}
perf sched timehist: Add -I/--idle-hist option The --idle-hist option is to analyze system idle state so which process makes cpu to go idle. If this option is specified, non-idle events will be skipped and processes switching to/from idle will be shown. This option is mostly useful when used with --summary(-only) option. In the idle-time summary view, idle time is accounted to previous thread which is run before idle task. The example output looks like following: Idle-time summary comm parent sched-out idle-time min-idle avg-idle max-idle stddev migrations (count) (msec) (msec) (msec) (msec) % -------------------------------------------------------------------------------------------- rcu_preempt[7] 2 95 550.872 0.011 5.798 23.146 7.63 0 migration/1[16] 2 1 15.558 15.558 15.558 15.558 0.00 0 khugepaged[39] 2 1 3.062 3.062 3.062 3.062 0.00 0 kworker/0:1H[124] 2 2 4.728 0.611 2.364 4.116 74.12 0 systemd-journal[167] 1 1 4.510 4.510 4.510 4.510 0.00 0 kworker/u16:3[558] 2 13 74.737 0.080 5.749 12.960 21.96 0 irq/34-iwlwifi[628] 2 21 118.403 0.032 5.638 23.990 24.00 0 kworker/u17:0[673] 2 1 3.523 3.523 3.523 3.523 0.00 0 dbus-daemon[722] 1 1 6.743 6.743 6.743 6.743 0.00 0 ifplugd[741] 1 1 58.826 58.826 58.826 58.826 0.00 0 wpa_supplicant[1490] 1 1 13.302 13.302 13.302 13.302 0.00 0 wpa_actiond[1492] 1 2 4.064 0.168 2.032 3.896 91.72 0 dockerd[1500] 1 1 0.055 0.055 0.055 0.055 0.00 0 ... Signed-off-by: Namhyung Kim <namhyung@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Acked-by: David Ahern <dsahern@gmail.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20161208144755.16673-6-namhyung@kernel.org Link: http://lkml.kernel.org/r/20161213080632.19099-2-namhyung@kernel.org [ Merged fix sent by Namhyumg, as posted in the second Link: tag ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-12-08 22:47:54 +08:00
if (!sched->idle_hist || thread->tid == 0) {
timehist_update_runtime_stats(tr, t, tprev);
if (sched->idle_hist) {
struct idle_thread_runtime *itr = (void *)tr;
struct thread_runtime *last_tr;
BUG_ON(thread->tid != 0);
if (itr->last_thread == NULL)
goto out;
/* add current idle time as last thread's runtime */
last_tr = thread__get_runtime(itr->last_thread);
if (last_tr == NULL)
goto out;
timehist_update_runtime_stats(last_tr, t, tprev);
/*
* remove delta time of last thread as it's not updated
* and otherwise it will show an invalid value next
* time. we only care total run time and run stat.
*/
last_tr->dt_run = 0;
last_tr->dt_delay = 0;
last_tr->dt_sleep = 0;
last_tr->dt_iowait = 0;
last_tr->dt_preempt = 0;
perf sched timehist: Add -I/--idle-hist option The --idle-hist option is to analyze system idle state so which process makes cpu to go idle. If this option is specified, non-idle events will be skipped and processes switching to/from idle will be shown. This option is mostly useful when used with --summary(-only) option. In the idle-time summary view, idle time is accounted to previous thread which is run before idle task. The example output looks like following: Idle-time summary comm parent sched-out idle-time min-idle avg-idle max-idle stddev migrations (count) (msec) (msec) (msec) (msec) % -------------------------------------------------------------------------------------------- rcu_preempt[7] 2 95 550.872 0.011 5.798 23.146 7.63 0 migration/1[16] 2 1 15.558 15.558 15.558 15.558 0.00 0 khugepaged[39] 2 1 3.062 3.062 3.062 3.062 0.00 0 kworker/0:1H[124] 2 2 4.728 0.611 2.364 4.116 74.12 0 systemd-journal[167] 1 1 4.510 4.510 4.510 4.510 0.00 0 kworker/u16:3[558] 2 13 74.737 0.080 5.749 12.960 21.96 0 irq/34-iwlwifi[628] 2 21 118.403 0.032 5.638 23.990 24.00 0 kworker/u17:0[673] 2 1 3.523 3.523 3.523 3.523 0.00 0 dbus-daemon[722] 1 1 6.743 6.743 6.743 6.743 0.00 0 ifplugd[741] 1 1 58.826 58.826 58.826 58.826 0.00 0 wpa_supplicant[1490] 1 1 13.302 13.302 13.302 13.302 0.00 0 wpa_actiond[1492] 1 2 4.064 0.168 2.032 3.896 91.72 0 dockerd[1500] 1 1 0.055 0.055 0.055 0.055 0.00 0 ... Signed-off-by: Namhyung Kim <namhyung@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Acked-by: David Ahern <dsahern@gmail.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20161208144755.16673-6-namhyung@kernel.org Link: http://lkml.kernel.org/r/20161213080632.19099-2-namhyung@kernel.org [ Merged fix sent by Namhyumg, as posted in the second Link: tag ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-12-08 22:47:54 +08:00
perf sched timehist: Show callchains for idle stat When --idle-hist option is used with --summary, it now shows idle stats with callchains like below: Idle stats by callchain: CPU 0: 902.195 msec Idle time (msec) Count Callchains ---------------- ------- -------------------------------------------------- 370.589 69 futex_wait_queue_me <- futex_wait <- do_futex <- sys_futex <- entry_SYSCALL_64_fastpath 178.799 17 worker_thread <- kthread <- ret_from_fork 128.352 17 schedule_timeout <- rcu_gp_kthread <- kthread <- ret_from_fork 125.111 19 schedule_hrtimeout_range_clock <- schedule_hrtimeout_range <- poll_schedule_timeout <- do_select <- core_sys_select 71.599 50 schedule_hrtimeout_range_clock <- schedule_hrtimeout_range <- poll_schedule_timeout <- do_sys_poll <- sys_poll 23.146 1 rcu_gp_kthread <- kthread <- ret_from_fork 4.510 1 schedule_hrtimeout_range_clock <- schedule_hrtimeout_range <- ep_poll <- sys_epoll_wait <- do_syscall_64 0.085 1 schedule_hrtimeout_range_clock <- schedule_hrtimeout_range <- poll_schedule_timeout <- do_sys_poll <- do_restart_poll ... Committer notes: Extra testing: # uname -a Linux jouet 4.8.8-300.fc25.x86_64 #1 SMP Tue Nov 15 18:10:06 UTC 2016 x86_64 x86_64 x86_64 GNU/Linux 1) Run 'perf sched record -g' 2) Run 'perf sched timehist --idle --summary' <SNIP> Idle stats by callchain: CPU 0: 13456.840 msec Idle time (msec) Count Callchains ---------------- ----- -------------------------------------------------- 5386.637 3283 schedule_hrtimeout_range_clock <- schedule_hrtimeout_range <- poll_schedule_timeout <- do_sys_poll <- sys_poll 2750.238 2299 futex_wait_queue_me <- futex_wait <- do_futex <- sys_futex <- do_syscall_64 1275.672 1287 schedule_hrtimeout_range_clock <- schedule_hrtimeout_range <- ep_poll <- sys_epoll_wait <- entry_SYSCALL_64_fastpath 936.322 452 worker_thread <- kthread <- ret_from_fork 741.311 385 rcu_nocb_kthread <- kthread <- ret_from_fork 729.385 248 schedule_hrtimeout_range_clock <- schedule_hrtimeout_range <- poll_schedule_timeout <- do_sys_poll <- sys_ppoll 365.386 229 irq_thread <- kthread <- ret_from_fork 338.934 265 futex_wait_queue_me <- futex_wait <- do_futex <- sys_futex <- entry_SYSCALL_64_fastpath 219.488 201 schedule_timeout <- rcu_gp_kthread <- kthread <- ret_from_fork 186.839 410 schedule_hrtimeout_range_clock <- schedule_hrtimeout_range <- ep_poll <- sys_epoll_wait <- do_syscall_64 142.541 59 kvm_vcpu_block <- kvm_arch_vcpu_ioctl_run <- kvm_vcpu_ioctl <- do_vfs_ioctl <- sys_ioctl 83.887 92 smpboot_thread_fn <- kthread <- ret_from_fork 62.722 96 do_exit <- do_group_exit <- 0x2a5594 <- entry_SYSCALL_64_fastpath 47.894 83 pipe_wait <- pipe_read <- __vfs_read <- vfs_read <- sys_read 46.554 61 rcu_gp_kthread <- kthread <- ret_from_fork 34.337 21 schedule_timeout <- intel_fbc_work_fn <- process_one_work <- worker_thread <- kthread 29.521 14 schedule_hrtimeout_range_clock <- schedule_hrtimeout_range <- poll_schedule_timeout <- do_select <- core_sys_select 20.274 10 schedule_timeout <- io_schedule_timeout <- bit_wait_io <- __wait_on_bit <- out_of_line_wait_on_bit 15.085 55 schedule_timeout <- unix_stream_read_generic <- unix_stream_recvmsg <- sock_recvmsg <- SYSC_recvfrom <SNIP> Signed-off-by: Namhyung Kim <namhyung@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Acked-by: David Ahern <dsahern@gmail.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20161208144755.16673-7-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-12-08 22:47:55 +08:00
if (itr->cursor.nr)
callchain_append(&itr->callchain, &itr->cursor, t - tprev);
perf sched timehist: Add -I/--idle-hist option The --idle-hist option is to analyze system idle state so which process makes cpu to go idle. If this option is specified, non-idle events will be skipped and processes switching to/from idle will be shown. This option is mostly useful when used with --summary(-only) option. In the idle-time summary view, idle time is accounted to previous thread which is run before idle task. The example output looks like following: Idle-time summary comm parent sched-out idle-time min-idle avg-idle max-idle stddev migrations (count) (msec) (msec) (msec) (msec) % -------------------------------------------------------------------------------------------- rcu_preempt[7] 2 95 550.872 0.011 5.798 23.146 7.63 0 migration/1[16] 2 1 15.558 15.558 15.558 15.558 0.00 0 khugepaged[39] 2 1 3.062 3.062 3.062 3.062 0.00 0 kworker/0:1H[124] 2 2 4.728 0.611 2.364 4.116 74.12 0 systemd-journal[167] 1 1 4.510 4.510 4.510 4.510 0.00 0 kworker/u16:3[558] 2 13 74.737 0.080 5.749 12.960 21.96 0 irq/34-iwlwifi[628] 2 21 118.403 0.032 5.638 23.990 24.00 0 kworker/u17:0[673] 2 1 3.523 3.523 3.523 3.523 0.00 0 dbus-daemon[722] 1 1 6.743 6.743 6.743 6.743 0.00 0 ifplugd[741] 1 1 58.826 58.826 58.826 58.826 0.00 0 wpa_supplicant[1490] 1 1 13.302 13.302 13.302 13.302 0.00 0 wpa_actiond[1492] 1 2 4.064 0.168 2.032 3.896 91.72 0 dockerd[1500] 1 1 0.055 0.055 0.055 0.055 0.00 0 ... Signed-off-by: Namhyung Kim <namhyung@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Acked-by: David Ahern <dsahern@gmail.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20161208144755.16673-6-namhyung@kernel.org Link: http://lkml.kernel.org/r/20161213080632.19099-2-namhyung@kernel.org [ Merged fix sent by Namhyumg, as posted in the second Link: tag ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-12-08 22:47:54 +08:00
itr->last_thread = NULL;
}
}
perf sched timehist: Add option to specify time window of interest Add option to allow user to control analysis window. e.g., collect data for time window and analyze a segment of interest within that window. Committer notes: Testing it: # perf sched record -a usleep 1 [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 1.593 MB perf.data (25 samples) ] # # perf sched timehist | head -18 Samples do not have callchains. time cpu task name wait time sch delay run time [tid/pid] (msec) (msec) (msec) ------------- ------ --------------- --------- --------- -------- 19818.635579 [0002] <idle> 0.000 0.000 0.000 19818.635613 [0000] perf[9116] 0.000 0.000 0.000 19818.635676 [0000] <idle> 0.000 0.000 0.063 19818.635678 [0000] rcuos/2[29] 0.000 0.002 0.001 19818.635696 [0002] perf[9117] 0.000 0.004 0.116 19818.635702 [0000] <idle> 0.001 0.000 0.024 19818.635709 [0002] migration/2[25] 0.000 0.003 0.012 19818.636263 [0000] usleep[9117] 0.005 0.000 0.560 19818.636316 [0000] <idle> 0.560 0.000 0.053 19818.636358 [0002] <idle> 0.129 0.000 0.649 19818.636358 [0000] usleep[9117] 0.053 0.002 0.042 # # perf sched timehist --time 19818.635696, Samples do not have callchains. time cpu task name wait time sch delay run time [tid/pid] (msec) (msec) (msec) ------------- ------ --------------- -------- --------- --------- 19818.635696 [0002] perf[9117] 0.000 0.120 0.000 19818.635702 [0000] <idle> 0.019 0.000 0.006 19818.635709 [0002] migration/2[25] 0.000 0.003 0.012 19818.636263 [0000] usleep[9117] 0.005 0.000 0.560 19818.636316 [0000] <idle> 0.560 0.000 0.053 19818.636358 [0002] <idle> 0.129 0.000 0.649 19818.636358 [0000] usleep[9117] 0.053 0.002 0.042 # # perf sched timehist --time 19818.635696,19818.635709 Samples do not have callchains. time cpu task name wait time sch delay run time [tid/pid] (msec) (msec) (msec) ------------- ------ --------------- --------- --------- --------- 19818.635696 [0002] perf[9117] 0.000 0.120 0.000 19818.635702 [0000] <idle> 0.019 0.000 0.006 19818.635709 [0002] migration/2[25] 0.000 0.003 0.012 19818.635709 [0000] usleep[9117] 0.005 0.000 0.006 # Signed-off-by: David Ahern <dsahern@gmail.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Acked-by: Namhyung Kim <namhyung@kernel.org> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1480439746-42695-5-git-send-email-dsahern@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-11-30 01:15:44 +08:00
perf sched timehist: Add summary options The -s/--summary option is to show process runtime statistics. And the -S/--with-summary option is to show the stats with the normal output. $ perf sched timehist -s Runtime summary comm parent sched-in run-time min-run avg-run max-run stddev (count) (msec) (msec) (msec) (msec) % --------------------------------------------------------------------------------------------------------- ksoftirqd/0[3] 2 2 0.011 0.004 0.005 0.006 14.87 rcu_preempt[7] 2 11 0.071 0.002 0.006 0.017 20.23 watchdog/0[11] 2 1 0.002 0.002 0.002 0.002 0.00 watchdog/1[12] 2 1 0.004 0.004 0.004 0.004 0.00 ... Terminated tasks: sleep[7220] 7219 3 0.770 0.087 0.256 0.576 62.28 Idle stats: CPU 0 idle for 2352.006 msec CPU 1 idle for 2764.497 msec CPU 2 idle for 2998.229 msec CPU 3 idle for 2967.800 msec Total number of unique tasks: 52 Total number of context switches: 2532 Total run time (msec): 218.036 Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Ingo Molnar <mingo@kernel.org> Acked-by: Jiri Olsa <jolsa@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/20161116060634.28477-5-namhyung@kernel.org [ Add documentation from last commit, so that docs comes with the cset that introduces the feature ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-11-16 14:06:30 +08:00
if (!sched->summary_only)
timehist_print_sample(sched, evsel, sample, &al, thread, t, state);
out:
if (sched->hist_time.start == 0 && t >= ptime->start)
sched->hist_time.start = t;
if (ptime->end == 0 || t <= ptime->end)
sched->hist_time.end = t;
if (tr) {
/* time of this sched_switch event becomes last time task seen */
tr->last_time = sample->time;
/* last state is used to determine where to account wait time */
tr->last_state = state;
/* sched out event for task so reset ready to run time */
tr->ready_to_run = 0;
}
perf_evsel__save_time(evsel, sample->time, sample->cpu);
return rc;
}
static int timehist_sched_switch_event(struct perf_tool *tool,
union perf_event *event,
struct evsel *evsel,
struct perf_sample *sample,
struct machine *machine __maybe_unused)
{
return timehist_sched_change_event(tool, event, evsel, sample, machine);
}
static int process_lost(struct perf_tool *tool __maybe_unused,
union perf_event *event,
struct perf_sample *sample,
struct machine *machine __maybe_unused)
{
char tstr[64];
timestamp__scnprintf_usec(sample->time, tstr, sizeof(tstr));
printf("%15s ", tstr);
printf("lost %" PRI_lu64 " events on cpu %d\n", event->lost.lost, sample->cpu);
return 0;
}
perf sched timehist: Add summary options The -s/--summary option is to show process runtime statistics. And the -S/--with-summary option is to show the stats with the normal output. $ perf sched timehist -s Runtime summary comm parent sched-in run-time min-run avg-run max-run stddev (count) (msec) (msec) (msec) (msec) % --------------------------------------------------------------------------------------------------------- ksoftirqd/0[3] 2 2 0.011 0.004 0.005 0.006 14.87 rcu_preempt[7] 2 11 0.071 0.002 0.006 0.017 20.23 watchdog/0[11] 2 1 0.002 0.002 0.002 0.002 0.00 watchdog/1[12] 2 1 0.004 0.004 0.004 0.004 0.00 ... Terminated tasks: sleep[7220] 7219 3 0.770 0.087 0.256 0.576 62.28 Idle stats: CPU 0 idle for 2352.006 msec CPU 1 idle for 2764.497 msec CPU 2 idle for 2998.229 msec CPU 3 idle for 2967.800 msec Total number of unique tasks: 52 Total number of context switches: 2532 Total run time (msec): 218.036 Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Ingo Molnar <mingo@kernel.org> Acked-by: Jiri Olsa <jolsa@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/20161116060634.28477-5-namhyung@kernel.org [ Add documentation from last commit, so that docs comes with the cset that introduces the feature ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-11-16 14:06:30 +08:00
static void print_thread_runtime(struct thread *t,
struct thread_runtime *r)
{
double mean = avg_stats(&r->run_stats);
float stddev;
printf("%*s %5d %9" PRIu64 " ",
comm_width, timehist_get_commstr(t), t->ppid,
(u64) r->run_stats.n);
print_sched_time(r->total_run_time, 8);
stddev = rel_stddev_stats(stddev_stats(&r->run_stats), mean);
print_sched_time(r->run_stats.min, 6);
printf(" ");
print_sched_time((u64) mean, 6);
printf(" ");
print_sched_time(r->run_stats.max, 6);
printf(" ");
printf("%5.2f", stddev);
printf(" %5" PRIu64, r->migrations);
perf sched timehist: Add summary options The -s/--summary option is to show process runtime statistics. And the -S/--with-summary option is to show the stats with the normal output. $ perf sched timehist -s Runtime summary comm parent sched-in run-time min-run avg-run max-run stddev (count) (msec) (msec) (msec) (msec) % --------------------------------------------------------------------------------------------------------- ksoftirqd/0[3] 2 2 0.011 0.004 0.005 0.006 14.87 rcu_preempt[7] 2 11 0.071 0.002 0.006 0.017 20.23 watchdog/0[11] 2 1 0.002 0.002 0.002 0.002 0.00 watchdog/1[12] 2 1 0.004 0.004 0.004 0.004 0.00 ... Terminated tasks: sleep[7220] 7219 3 0.770 0.087 0.256 0.576 62.28 Idle stats: CPU 0 idle for 2352.006 msec CPU 1 idle for 2764.497 msec CPU 2 idle for 2998.229 msec CPU 3 idle for 2967.800 msec Total number of unique tasks: 52 Total number of context switches: 2532 Total run time (msec): 218.036 Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Ingo Molnar <mingo@kernel.org> Acked-by: Jiri Olsa <jolsa@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/20161116060634.28477-5-namhyung@kernel.org [ Add documentation from last commit, so that docs comes with the cset that introduces the feature ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-11-16 14:06:30 +08:00
printf("\n");
}
static void print_thread_waittime(struct thread *t,
struct thread_runtime *r)
{
printf("%*s %5d %9" PRIu64 " ",
comm_width, timehist_get_commstr(t), t->ppid,
(u64) r->run_stats.n);
print_sched_time(r->total_run_time, 8);
print_sched_time(r->total_sleep_time, 6);
printf(" ");
print_sched_time(r->total_iowait_time, 6);
printf(" ");
print_sched_time(r->total_preempt_time, 6);
printf(" ");
print_sched_time(r->total_delay_time, 6);
printf("\n");
}
perf sched timehist: Add summary options The -s/--summary option is to show process runtime statistics. And the -S/--with-summary option is to show the stats with the normal output. $ perf sched timehist -s Runtime summary comm parent sched-in run-time min-run avg-run max-run stddev (count) (msec) (msec) (msec) (msec) % --------------------------------------------------------------------------------------------------------- ksoftirqd/0[3] 2 2 0.011 0.004 0.005 0.006 14.87 rcu_preempt[7] 2 11 0.071 0.002 0.006 0.017 20.23 watchdog/0[11] 2 1 0.002 0.002 0.002 0.002 0.00 watchdog/1[12] 2 1 0.004 0.004 0.004 0.004 0.00 ... Terminated tasks: sleep[7220] 7219 3 0.770 0.087 0.256 0.576 62.28 Idle stats: CPU 0 idle for 2352.006 msec CPU 1 idle for 2764.497 msec CPU 2 idle for 2998.229 msec CPU 3 idle for 2967.800 msec Total number of unique tasks: 52 Total number of context switches: 2532 Total run time (msec): 218.036 Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Ingo Molnar <mingo@kernel.org> Acked-by: Jiri Olsa <jolsa@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/20161116060634.28477-5-namhyung@kernel.org [ Add documentation from last commit, so that docs comes with the cset that introduces the feature ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-11-16 14:06:30 +08:00
struct total_run_stats {
struct perf_sched *sched;
perf sched timehist: Add summary options The -s/--summary option is to show process runtime statistics. And the -S/--with-summary option is to show the stats with the normal output. $ perf sched timehist -s Runtime summary comm parent sched-in run-time min-run avg-run max-run stddev (count) (msec) (msec) (msec) (msec) % --------------------------------------------------------------------------------------------------------- ksoftirqd/0[3] 2 2 0.011 0.004 0.005 0.006 14.87 rcu_preempt[7] 2 11 0.071 0.002 0.006 0.017 20.23 watchdog/0[11] 2 1 0.002 0.002 0.002 0.002 0.00 watchdog/1[12] 2 1 0.004 0.004 0.004 0.004 0.00 ... Terminated tasks: sleep[7220] 7219 3 0.770 0.087 0.256 0.576 62.28 Idle stats: CPU 0 idle for 2352.006 msec CPU 1 idle for 2764.497 msec CPU 2 idle for 2998.229 msec CPU 3 idle for 2967.800 msec Total number of unique tasks: 52 Total number of context switches: 2532 Total run time (msec): 218.036 Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Ingo Molnar <mingo@kernel.org> Acked-by: Jiri Olsa <jolsa@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/20161116060634.28477-5-namhyung@kernel.org [ Add documentation from last commit, so that docs comes with the cset that introduces the feature ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-11-16 14:06:30 +08:00
u64 sched_count;
u64 task_count;
u64 total_run_time;
};
static int __show_thread_runtime(struct thread *t, void *priv)
{
struct total_run_stats *stats = priv;
struct thread_runtime *r;
if (thread__is_filtered(t))
return 0;
r = thread__priv(t);
if (r && r->run_stats.n) {
stats->task_count++;
stats->sched_count += r->run_stats.n;
stats->total_run_time += r->total_run_time;
if (stats->sched->show_state)
print_thread_waittime(t, r);
else
print_thread_runtime(t, r);
perf sched timehist: Add summary options The -s/--summary option is to show process runtime statistics. And the -S/--with-summary option is to show the stats with the normal output. $ perf sched timehist -s Runtime summary comm parent sched-in run-time min-run avg-run max-run stddev (count) (msec) (msec) (msec) (msec) % --------------------------------------------------------------------------------------------------------- ksoftirqd/0[3] 2 2 0.011 0.004 0.005 0.006 14.87 rcu_preempt[7] 2 11 0.071 0.002 0.006 0.017 20.23 watchdog/0[11] 2 1 0.002 0.002 0.002 0.002 0.00 watchdog/1[12] 2 1 0.004 0.004 0.004 0.004 0.00 ... Terminated tasks: sleep[7220] 7219 3 0.770 0.087 0.256 0.576 62.28 Idle stats: CPU 0 idle for 2352.006 msec CPU 1 idle for 2764.497 msec CPU 2 idle for 2998.229 msec CPU 3 idle for 2967.800 msec Total number of unique tasks: 52 Total number of context switches: 2532 Total run time (msec): 218.036 Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Ingo Molnar <mingo@kernel.org> Acked-by: Jiri Olsa <jolsa@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/20161116060634.28477-5-namhyung@kernel.org [ Add documentation from last commit, so that docs comes with the cset that introduces the feature ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-11-16 14:06:30 +08:00
}
return 0;
}
static int show_thread_runtime(struct thread *t, void *priv)
{
if (t->dead)
return 0;
return __show_thread_runtime(t, priv);
}
static int show_deadthread_runtime(struct thread *t, void *priv)
{
if (!t->dead)
return 0;
return __show_thread_runtime(t, priv);
}
perf sched timehist: Show callchains for idle stat When --idle-hist option is used with --summary, it now shows idle stats with callchains like below: Idle stats by callchain: CPU 0: 902.195 msec Idle time (msec) Count Callchains ---------------- ------- -------------------------------------------------- 370.589 69 futex_wait_queue_me <- futex_wait <- do_futex <- sys_futex <- entry_SYSCALL_64_fastpath 178.799 17 worker_thread <- kthread <- ret_from_fork 128.352 17 schedule_timeout <- rcu_gp_kthread <- kthread <- ret_from_fork 125.111 19 schedule_hrtimeout_range_clock <- schedule_hrtimeout_range <- poll_schedule_timeout <- do_select <- core_sys_select 71.599 50 schedule_hrtimeout_range_clock <- schedule_hrtimeout_range <- poll_schedule_timeout <- do_sys_poll <- sys_poll 23.146 1 rcu_gp_kthread <- kthread <- ret_from_fork 4.510 1 schedule_hrtimeout_range_clock <- schedule_hrtimeout_range <- ep_poll <- sys_epoll_wait <- do_syscall_64 0.085 1 schedule_hrtimeout_range_clock <- schedule_hrtimeout_range <- poll_schedule_timeout <- do_sys_poll <- do_restart_poll ... Committer notes: Extra testing: # uname -a Linux jouet 4.8.8-300.fc25.x86_64 #1 SMP Tue Nov 15 18:10:06 UTC 2016 x86_64 x86_64 x86_64 GNU/Linux 1) Run 'perf sched record -g' 2) Run 'perf sched timehist --idle --summary' <SNIP> Idle stats by callchain: CPU 0: 13456.840 msec Idle time (msec) Count Callchains ---------------- ----- -------------------------------------------------- 5386.637 3283 schedule_hrtimeout_range_clock <- schedule_hrtimeout_range <- poll_schedule_timeout <- do_sys_poll <- sys_poll 2750.238 2299 futex_wait_queue_me <- futex_wait <- do_futex <- sys_futex <- do_syscall_64 1275.672 1287 schedule_hrtimeout_range_clock <- schedule_hrtimeout_range <- ep_poll <- sys_epoll_wait <- entry_SYSCALL_64_fastpath 936.322 452 worker_thread <- kthread <- ret_from_fork 741.311 385 rcu_nocb_kthread <- kthread <- ret_from_fork 729.385 248 schedule_hrtimeout_range_clock <- schedule_hrtimeout_range <- poll_schedule_timeout <- do_sys_poll <- sys_ppoll 365.386 229 irq_thread <- kthread <- ret_from_fork 338.934 265 futex_wait_queue_me <- futex_wait <- do_futex <- sys_futex <- entry_SYSCALL_64_fastpath 219.488 201 schedule_timeout <- rcu_gp_kthread <- kthread <- ret_from_fork 186.839 410 schedule_hrtimeout_range_clock <- schedule_hrtimeout_range <- ep_poll <- sys_epoll_wait <- do_syscall_64 142.541 59 kvm_vcpu_block <- kvm_arch_vcpu_ioctl_run <- kvm_vcpu_ioctl <- do_vfs_ioctl <- sys_ioctl 83.887 92 smpboot_thread_fn <- kthread <- ret_from_fork 62.722 96 do_exit <- do_group_exit <- 0x2a5594 <- entry_SYSCALL_64_fastpath 47.894 83 pipe_wait <- pipe_read <- __vfs_read <- vfs_read <- sys_read 46.554 61 rcu_gp_kthread <- kthread <- ret_from_fork 34.337 21 schedule_timeout <- intel_fbc_work_fn <- process_one_work <- worker_thread <- kthread 29.521 14 schedule_hrtimeout_range_clock <- schedule_hrtimeout_range <- poll_schedule_timeout <- do_select <- core_sys_select 20.274 10 schedule_timeout <- io_schedule_timeout <- bit_wait_io <- __wait_on_bit <- out_of_line_wait_on_bit 15.085 55 schedule_timeout <- unix_stream_read_generic <- unix_stream_recvmsg <- sock_recvmsg <- SYSC_recvfrom <SNIP> Signed-off-by: Namhyung Kim <namhyung@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Acked-by: David Ahern <dsahern@gmail.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20161208144755.16673-7-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-12-08 22:47:55 +08:00
static size_t callchain__fprintf_folded(FILE *fp, struct callchain_node *node)
{
const char *sep = " <- ";
struct callchain_list *chain;
size_t ret = 0;
char bf[1024];
bool first;
if (node == NULL)
return 0;
ret = callchain__fprintf_folded(fp, node->parent);
first = (ret == 0);
list_for_each_entry(chain, &node->val, list) {
if (chain->ip >= PERF_CONTEXT_MAX)
continue;
if (chain->ms.sym && chain->ms.sym->ignore)
continue;
ret += fprintf(fp, "%s%s", first ? "" : sep,
callchain_list__sym_name(chain, bf, sizeof(bf),
false));
first = false;
}
return ret;
}
static size_t timehist_print_idlehist_callchain(struct rb_root_cached *root)
perf sched timehist: Show callchains for idle stat When --idle-hist option is used with --summary, it now shows idle stats with callchains like below: Idle stats by callchain: CPU 0: 902.195 msec Idle time (msec) Count Callchains ---------------- ------- -------------------------------------------------- 370.589 69 futex_wait_queue_me <- futex_wait <- do_futex <- sys_futex <- entry_SYSCALL_64_fastpath 178.799 17 worker_thread <- kthread <- ret_from_fork 128.352 17 schedule_timeout <- rcu_gp_kthread <- kthread <- ret_from_fork 125.111 19 schedule_hrtimeout_range_clock <- schedule_hrtimeout_range <- poll_schedule_timeout <- do_select <- core_sys_select 71.599 50 schedule_hrtimeout_range_clock <- schedule_hrtimeout_range <- poll_schedule_timeout <- do_sys_poll <- sys_poll 23.146 1 rcu_gp_kthread <- kthread <- ret_from_fork 4.510 1 schedule_hrtimeout_range_clock <- schedule_hrtimeout_range <- ep_poll <- sys_epoll_wait <- do_syscall_64 0.085 1 schedule_hrtimeout_range_clock <- schedule_hrtimeout_range <- poll_schedule_timeout <- do_sys_poll <- do_restart_poll ... Committer notes: Extra testing: # uname -a Linux jouet 4.8.8-300.fc25.x86_64 #1 SMP Tue Nov 15 18:10:06 UTC 2016 x86_64 x86_64 x86_64 GNU/Linux 1) Run 'perf sched record -g' 2) Run 'perf sched timehist --idle --summary' <SNIP> Idle stats by callchain: CPU 0: 13456.840 msec Idle time (msec) Count Callchains ---------------- ----- -------------------------------------------------- 5386.637 3283 schedule_hrtimeout_range_clock <- schedule_hrtimeout_range <- poll_schedule_timeout <- do_sys_poll <- sys_poll 2750.238 2299 futex_wait_queue_me <- futex_wait <- do_futex <- sys_futex <- do_syscall_64 1275.672 1287 schedule_hrtimeout_range_clock <- schedule_hrtimeout_range <- ep_poll <- sys_epoll_wait <- entry_SYSCALL_64_fastpath 936.322 452 worker_thread <- kthread <- ret_from_fork 741.311 385 rcu_nocb_kthread <- kthread <- ret_from_fork 729.385 248 schedule_hrtimeout_range_clock <- schedule_hrtimeout_range <- poll_schedule_timeout <- do_sys_poll <- sys_ppoll 365.386 229 irq_thread <- kthread <- ret_from_fork 338.934 265 futex_wait_queue_me <- futex_wait <- do_futex <- sys_futex <- entry_SYSCALL_64_fastpath 219.488 201 schedule_timeout <- rcu_gp_kthread <- kthread <- ret_from_fork 186.839 410 schedule_hrtimeout_range_clock <- schedule_hrtimeout_range <- ep_poll <- sys_epoll_wait <- do_syscall_64 142.541 59 kvm_vcpu_block <- kvm_arch_vcpu_ioctl_run <- kvm_vcpu_ioctl <- do_vfs_ioctl <- sys_ioctl 83.887 92 smpboot_thread_fn <- kthread <- ret_from_fork 62.722 96 do_exit <- do_group_exit <- 0x2a5594 <- entry_SYSCALL_64_fastpath 47.894 83 pipe_wait <- pipe_read <- __vfs_read <- vfs_read <- sys_read 46.554 61 rcu_gp_kthread <- kthread <- ret_from_fork 34.337 21 schedule_timeout <- intel_fbc_work_fn <- process_one_work <- worker_thread <- kthread 29.521 14 schedule_hrtimeout_range_clock <- schedule_hrtimeout_range <- poll_schedule_timeout <- do_select <- core_sys_select 20.274 10 schedule_timeout <- io_schedule_timeout <- bit_wait_io <- __wait_on_bit <- out_of_line_wait_on_bit 15.085 55 schedule_timeout <- unix_stream_read_generic <- unix_stream_recvmsg <- sock_recvmsg <- SYSC_recvfrom <SNIP> Signed-off-by: Namhyung Kim <namhyung@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Acked-by: David Ahern <dsahern@gmail.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20161208144755.16673-7-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-12-08 22:47:55 +08:00
{
size_t ret = 0;
FILE *fp = stdout;
struct callchain_node *chain;
struct rb_node *rb_node = rb_first_cached(root);
perf sched timehist: Show callchains for idle stat When --idle-hist option is used with --summary, it now shows idle stats with callchains like below: Idle stats by callchain: CPU 0: 902.195 msec Idle time (msec) Count Callchains ---------------- ------- -------------------------------------------------- 370.589 69 futex_wait_queue_me <- futex_wait <- do_futex <- sys_futex <- entry_SYSCALL_64_fastpath 178.799 17 worker_thread <- kthread <- ret_from_fork 128.352 17 schedule_timeout <- rcu_gp_kthread <- kthread <- ret_from_fork 125.111 19 schedule_hrtimeout_range_clock <- schedule_hrtimeout_range <- poll_schedule_timeout <- do_select <- core_sys_select 71.599 50 schedule_hrtimeout_range_clock <- schedule_hrtimeout_range <- poll_schedule_timeout <- do_sys_poll <- sys_poll 23.146 1 rcu_gp_kthread <- kthread <- ret_from_fork 4.510 1 schedule_hrtimeout_range_clock <- schedule_hrtimeout_range <- ep_poll <- sys_epoll_wait <- do_syscall_64 0.085 1 schedule_hrtimeout_range_clock <- schedule_hrtimeout_range <- poll_schedule_timeout <- do_sys_poll <- do_restart_poll ... Committer notes: Extra testing: # uname -a Linux jouet 4.8.8-300.fc25.x86_64 #1 SMP Tue Nov 15 18:10:06 UTC 2016 x86_64 x86_64 x86_64 GNU/Linux 1) Run 'perf sched record -g' 2) Run 'perf sched timehist --idle --summary' <SNIP> Idle stats by callchain: CPU 0: 13456.840 msec Idle time (msec) Count Callchains ---------------- ----- -------------------------------------------------- 5386.637 3283 schedule_hrtimeout_range_clock <- schedule_hrtimeout_range <- poll_schedule_timeout <- do_sys_poll <- sys_poll 2750.238 2299 futex_wait_queue_me <- futex_wait <- do_futex <- sys_futex <- do_syscall_64 1275.672 1287 schedule_hrtimeout_range_clock <- schedule_hrtimeout_range <- ep_poll <- sys_epoll_wait <- entry_SYSCALL_64_fastpath 936.322 452 worker_thread <- kthread <- ret_from_fork 741.311 385 rcu_nocb_kthread <- kthread <- ret_from_fork 729.385 248 schedule_hrtimeout_range_clock <- schedule_hrtimeout_range <- poll_schedule_timeout <- do_sys_poll <- sys_ppoll 365.386 229 irq_thread <- kthread <- ret_from_fork 338.934 265 futex_wait_queue_me <- futex_wait <- do_futex <- sys_futex <- entry_SYSCALL_64_fastpath 219.488 201 schedule_timeout <- rcu_gp_kthread <- kthread <- ret_from_fork 186.839 410 schedule_hrtimeout_range_clock <- schedule_hrtimeout_range <- ep_poll <- sys_epoll_wait <- do_syscall_64 142.541 59 kvm_vcpu_block <- kvm_arch_vcpu_ioctl_run <- kvm_vcpu_ioctl <- do_vfs_ioctl <- sys_ioctl 83.887 92 smpboot_thread_fn <- kthread <- ret_from_fork 62.722 96 do_exit <- do_group_exit <- 0x2a5594 <- entry_SYSCALL_64_fastpath 47.894 83 pipe_wait <- pipe_read <- __vfs_read <- vfs_read <- sys_read 46.554 61 rcu_gp_kthread <- kthread <- ret_from_fork 34.337 21 schedule_timeout <- intel_fbc_work_fn <- process_one_work <- worker_thread <- kthread 29.521 14 schedule_hrtimeout_range_clock <- schedule_hrtimeout_range <- poll_schedule_timeout <- do_select <- core_sys_select 20.274 10 schedule_timeout <- io_schedule_timeout <- bit_wait_io <- __wait_on_bit <- out_of_line_wait_on_bit 15.085 55 schedule_timeout <- unix_stream_read_generic <- unix_stream_recvmsg <- sock_recvmsg <- SYSC_recvfrom <SNIP> Signed-off-by: Namhyung Kim <namhyung@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Acked-by: David Ahern <dsahern@gmail.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20161208144755.16673-7-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-12-08 22:47:55 +08:00
printf(" %16s %8s %s\n", "Idle time (msec)", "Count", "Callchains");
printf(" %.16s %.8s %.50s\n", graph_dotted_line, graph_dotted_line,
graph_dotted_line);
while (rb_node) {
chain = rb_entry(rb_node, struct callchain_node, rb_node);
rb_node = rb_next(rb_node);
ret += fprintf(fp, " ");
print_sched_time(chain->hit, 12);
ret += 16; /* print_sched_time returns 2nd arg + 4 */
ret += fprintf(fp, " %8d ", chain->count);
ret += callchain__fprintf_folded(fp, chain);
ret += fprintf(fp, "\n");
}
return ret;
}
perf sched timehist: Add summary options The -s/--summary option is to show process runtime statistics. And the -S/--with-summary option is to show the stats with the normal output. $ perf sched timehist -s Runtime summary comm parent sched-in run-time min-run avg-run max-run stddev (count) (msec) (msec) (msec) (msec) % --------------------------------------------------------------------------------------------------------- ksoftirqd/0[3] 2 2 0.011 0.004 0.005 0.006 14.87 rcu_preempt[7] 2 11 0.071 0.002 0.006 0.017 20.23 watchdog/0[11] 2 1 0.002 0.002 0.002 0.002 0.00 watchdog/1[12] 2 1 0.004 0.004 0.004 0.004 0.00 ... Terminated tasks: sleep[7220] 7219 3 0.770 0.087 0.256 0.576 62.28 Idle stats: CPU 0 idle for 2352.006 msec CPU 1 idle for 2764.497 msec CPU 2 idle for 2998.229 msec CPU 3 idle for 2967.800 msec Total number of unique tasks: 52 Total number of context switches: 2532 Total run time (msec): 218.036 Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Ingo Molnar <mingo@kernel.org> Acked-by: Jiri Olsa <jolsa@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/20161116060634.28477-5-namhyung@kernel.org [ Add documentation from last commit, so that docs comes with the cset that introduces the feature ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-11-16 14:06:30 +08:00
static void timehist_print_summary(struct perf_sched *sched,
struct perf_session *session)
{
struct machine *m = &session->machines.host;
struct total_run_stats totals;
u64 task_count;
struct thread *t;
struct thread_runtime *r;
int i;
u64 hist_time = sched->hist_time.end - sched->hist_time.start;
perf sched timehist: Add summary options The -s/--summary option is to show process runtime statistics. And the -S/--with-summary option is to show the stats with the normal output. $ perf sched timehist -s Runtime summary comm parent sched-in run-time min-run avg-run max-run stddev (count) (msec) (msec) (msec) (msec) % --------------------------------------------------------------------------------------------------------- ksoftirqd/0[3] 2 2 0.011 0.004 0.005 0.006 14.87 rcu_preempt[7] 2 11 0.071 0.002 0.006 0.017 20.23 watchdog/0[11] 2 1 0.002 0.002 0.002 0.002 0.00 watchdog/1[12] 2 1 0.004 0.004 0.004 0.004 0.00 ... Terminated tasks: sleep[7220] 7219 3 0.770 0.087 0.256 0.576 62.28 Idle stats: CPU 0 idle for 2352.006 msec CPU 1 idle for 2764.497 msec CPU 2 idle for 2998.229 msec CPU 3 idle for 2967.800 msec Total number of unique tasks: 52 Total number of context switches: 2532 Total run time (msec): 218.036 Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Ingo Molnar <mingo@kernel.org> Acked-by: Jiri Olsa <jolsa@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/20161116060634.28477-5-namhyung@kernel.org [ Add documentation from last commit, so that docs comes with the cset that introduces the feature ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-11-16 14:06:30 +08:00
memset(&totals, 0, sizeof(totals));
totals.sched = sched;
perf sched timehist: Add summary options The -s/--summary option is to show process runtime statistics. And the -S/--with-summary option is to show the stats with the normal output. $ perf sched timehist -s Runtime summary comm parent sched-in run-time min-run avg-run max-run stddev (count) (msec) (msec) (msec) (msec) % --------------------------------------------------------------------------------------------------------- ksoftirqd/0[3] 2 2 0.011 0.004 0.005 0.006 14.87 rcu_preempt[7] 2 11 0.071 0.002 0.006 0.017 20.23 watchdog/0[11] 2 1 0.002 0.002 0.002 0.002 0.00 watchdog/1[12] 2 1 0.004 0.004 0.004 0.004 0.00 ... Terminated tasks: sleep[7220] 7219 3 0.770 0.087 0.256 0.576 62.28 Idle stats: CPU 0 idle for 2352.006 msec CPU 1 idle for 2764.497 msec CPU 2 idle for 2998.229 msec CPU 3 idle for 2967.800 msec Total number of unique tasks: 52 Total number of context switches: 2532 Total run time (msec): 218.036 Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Ingo Molnar <mingo@kernel.org> Acked-by: Jiri Olsa <jolsa@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/20161116060634.28477-5-namhyung@kernel.org [ Add documentation from last commit, so that docs comes with the cset that introduces the feature ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-11-16 14:06:30 +08:00
perf sched timehist: Add -I/--idle-hist option The --idle-hist option is to analyze system idle state so which process makes cpu to go idle. If this option is specified, non-idle events will be skipped and processes switching to/from idle will be shown. This option is mostly useful when used with --summary(-only) option. In the idle-time summary view, idle time is accounted to previous thread which is run before idle task. The example output looks like following: Idle-time summary comm parent sched-out idle-time min-idle avg-idle max-idle stddev migrations (count) (msec) (msec) (msec) (msec) % -------------------------------------------------------------------------------------------- rcu_preempt[7] 2 95 550.872 0.011 5.798 23.146 7.63 0 migration/1[16] 2 1 15.558 15.558 15.558 15.558 0.00 0 khugepaged[39] 2 1 3.062 3.062 3.062 3.062 0.00 0 kworker/0:1H[124] 2 2 4.728 0.611 2.364 4.116 74.12 0 systemd-journal[167] 1 1 4.510 4.510 4.510 4.510 0.00 0 kworker/u16:3[558] 2 13 74.737 0.080 5.749 12.960 21.96 0 irq/34-iwlwifi[628] 2 21 118.403 0.032 5.638 23.990 24.00 0 kworker/u17:0[673] 2 1 3.523 3.523 3.523 3.523 0.00 0 dbus-daemon[722] 1 1 6.743 6.743 6.743 6.743 0.00 0 ifplugd[741] 1 1 58.826 58.826 58.826 58.826 0.00 0 wpa_supplicant[1490] 1 1 13.302 13.302 13.302 13.302 0.00 0 wpa_actiond[1492] 1 2 4.064 0.168 2.032 3.896 91.72 0 dockerd[1500] 1 1 0.055 0.055 0.055 0.055 0.00 0 ... Signed-off-by: Namhyung Kim <namhyung@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Acked-by: David Ahern <dsahern@gmail.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20161208144755.16673-6-namhyung@kernel.org Link: http://lkml.kernel.org/r/20161213080632.19099-2-namhyung@kernel.org [ Merged fix sent by Namhyumg, as posted in the second Link: tag ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-12-08 22:47:54 +08:00
if (sched->idle_hist) {
printf("\nIdle-time summary\n");
printf("%*s parent sched-out ", comm_width, "comm");
printf(" idle-time min-idle avg-idle max-idle stddev migrations\n");
} else if (sched->show_state) {
printf("\nWait-time summary\n");
printf("%*s parent sched-in ", comm_width, "comm");
printf(" run-time sleep iowait preempt delay\n");
perf sched timehist: Add -I/--idle-hist option The --idle-hist option is to analyze system idle state so which process makes cpu to go idle. If this option is specified, non-idle events will be skipped and processes switching to/from idle will be shown. This option is mostly useful when used with --summary(-only) option. In the idle-time summary view, idle time is accounted to previous thread which is run before idle task. The example output looks like following: Idle-time summary comm parent sched-out idle-time min-idle avg-idle max-idle stddev migrations (count) (msec) (msec) (msec) (msec) % -------------------------------------------------------------------------------------------- rcu_preempt[7] 2 95 550.872 0.011 5.798 23.146 7.63 0 migration/1[16] 2 1 15.558 15.558 15.558 15.558 0.00 0 khugepaged[39] 2 1 3.062 3.062 3.062 3.062 0.00 0 kworker/0:1H[124] 2 2 4.728 0.611 2.364 4.116 74.12 0 systemd-journal[167] 1 1 4.510 4.510 4.510 4.510 0.00 0 kworker/u16:3[558] 2 13 74.737 0.080 5.749 12.960 21.96 0 irq/34-iwlwifi[628] 2 21 118.403 0.032 5.638 23.990 24.00 0 kworker/u17:0[673] 2 1 3.523 3.523 3.523 3.523 0.00 0 dbus-daemon[722] 1 1 6.743 6.743 6.743 6.743 0.00 0 ifplugd[741] 1 1 58.826 58.826 58.826 58.826 0.00 0 wpa_supplicant[1490] 1 1 13.302 13.302 13.302 13.302 0.00 0 wpa_actiond[1492] 1 2 4.064 0.168 2.032 3.896 91.72 0 dockerd[1500] 1 1 0.055 0.055 0.055 0.055 0.00 0 ... Signed-off-by: Namhyung Kim <namhyung@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Acked-by: David Ahern <dsahern@gmail.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20161208144755.16673-6-namhyung@kernel.org Link: http://lkml.kernel.org/r/20161213080632.19099-2-namhyung@kernel.org [ Merged fix sent by Namhyumg, as posted in the second Link: tag ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-12-08 22:47:54 +08:00
} else {
printf("\nRuntime summary\n");
printf("%*s parent sched-in ", comm_width, "comm");
printf(" run-time min-run avg-run max-run stddev migrations\n");
}
perf sched timehist: Add summary options The -s/--summary option is to show process runtime statistics. And the -S/--with-summary option is to show the stats with the normal output. $ perf sched timehist -s Runtime summary comm parent sched-in run-time min-run avg-run max-run stddev (count) (msec) (msec) (msec) (msec) % --------------------------------------------------------------------------------------------------------- ksoftirqd/0[3] 2 2 0.011 0.004 0.005 0.006 14.87 rcu_preempt[7] 2 11 0.071 0.002 0.006 0.017 20.23 watchdog/0[11] 2 1 0.002 0.002 0.002 0.002 0.00 watchdog/1[12] 2 1 0.004 0.004 0.004 0.004 0.00 ... Terminated tasks: sleep[7220] 7219 3 0.770 0.087 0.256 0.576 62.28 Idle stats: CPU 0 idle for 2352.006 msec CPU 1 idle for 2764.497 msec CPU 2 idle for 2998.229 msec CPU 3 idle for 2967.800 msec Total number of unique tasks: 52 Total number of context switches: 2532 Total run time (msec): 218.036 Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Ingo Molnar <mingo@kernel.org> Acked-by: Jiri Olsa <jolsa@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/20161116060634.28477-5-namhyung@kernel.org [ Add documentation from last commit, so that docs comes with the cset that introduces the feature ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-11-16 14:06:30 +08:00
printf("%*s (count) ", comm_width, "");
printf(" (msec) (msec) (msec) (msec) %s\n",
sched->show_state ? "(msec)" : "%");
printf("%.117s\n", graph_dotted_line);
perf sched timehist: Add summary options The -s/--summary option is to show process runtime statistics. And the -S/--with-summary option is to show the stats with the normal output. $ perf sched timehist -s Runtime summary comm parent sched-in run-time min-run avg-run max-run stddev (count) (msec) (msec) (msec) (msec) % --------------------------------------------------------------------------------------------------------- ksoftirqd/0[3] 2 2 0.011 0.004 0.005 0.006 14.87 rcu_preempt[7] 2 11 0.071 0.002 0.006 0.017 20.23 watchdog/0[11] 2 1 0.002 0.002 0.002 0.002 0.00 watchdog/1[12] 2 1 0.004 0.004 0.004 0.004 0.00 ... Terminated tasks: sleep[7220] 7219 3 0.770 0.087 0.256 0.576 62.28 Idle stats: CPU 0 idle for 2352.006 msec CPU 1 idle for 2764.497 msec CPU 2 idle for 2998.229 msec CPU 3 idle for 2967.800 msec Total number of unique tasks: 52 Total number of context switches: 2532 Total run time (msec): 218.036 Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Ingo Molnar <mingo@kernel.org> Acked-by: Jiri Olsa <jolsa@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/20161116060634.28477-5-namhyung@kernel.org [ Add documentation from last commit, so that docs comes with the cset that introduces the feature ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-11-16 14:06:30 +08:00
machine__for_each_thread(m, show_thread_runtime, &totals);
task_count = totals.task_count;
if (!task_count)
printf("<no still running tasks>\n");
printf("\nTerminated tasks:\n");
machine__for_each_thread(m, show_deadthread_runtime, &totals);
if (task_count == totals.task_count)
printf("<no terminated tasks>\n");
/* CPU idle stats not tracked when samples were skipped */
perf sched timehist: Add -I/--idle-hist option The --idle-hist option is to analyze system idle state so which process makes cpu to go idle. If this option is specified, non-idle events will be skipped and processes switching to/from idle will be shown. This option is mostly useful when used with --summary(-only) option. In the idle-time summary view, idle time is accounted to previous thread which is run before idle task. The example output looks like following: Idle-time summary comm parent sched-out idle-time min-idle avg-idle max-idle stddev migrations (count) (msec) (msec) (msec) (msec) % -------------------------------------------------------------------------------------------- rcu_preempt[7] 2 95 550.872 0.011 5.798 23.146 7.63 0 migration/1[16] 2 1 15.558 15.558 15.558 15.558 0.00 0 khugepaged[39] 2 1 3.062 3.062 3.062 3.062 0.00 0 kworker/0:1H[124] 2 2 4.728 0.611 2.364 4.116 74.12 0 systemd-journal[167] 1 1 4.510 4.510 4.510 4.510 0.00 0 kworker/u16:3[558] 2 13 74.737 0.080 5.749 12.960 21.96 0 irq/34-iwlwifi[628] 2 21 118.403 0.032 5.638 23.990 24.00 0 kworker/u17:0[673] 2 1 3.523 3.523 3.523 3.523 0.00 0 dbus-daemon[722] 1 1 6.743 6.743 6.743 6.743 0.00 0 ifplugd[741] 1 1 58.826 58.826 58.826 58.826 0.00 0 wpa_supplicant[1490] 1 1 13.302 13.302 13.302 13.302 0.00 0 wpa_actiond[1492] 1 2 4.064 0.168 2.032 3.896 91.72 0 dockerd[1500] 1 1 0.055 0.055 0.055 0.055 0.00 0 ... Signed-off-by: Namhyung Kim <namhyung@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Acked-by: David Ahern <dsahern@gmail.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20161208144755.16673-6-namhyung@kernel.org Link: http://lkml.kernel.org/r/20161213080632.19099-2-namhyung@kernel.org [ Merged fix sent by Namhyumg, as posted in the second Link: tag ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-12-08 22:47:54 +08:00
if (sched->skipped_samples && !sched->idle_hist)
perf sched timehist: Add summary options The -s/--summary option is to show process runtime statistics. And the -S/--with-summary option is to show the stats with the normal output. $ perf sched timehist -s Runtime summary comm parent sched-in run-time min-run avg-run max-run stddev (count) (msec) (msec) (msec) (msec) % --------------------------------------------------------------------------------------------------------- ksoftirqd/0[3] 2 2 0.011 0.004 0.005 0.006 14.87 rcu_preempt[7] 2 11 0.071 0.002 0.006 0.017 20.23 watchdog/0[11] 2 1 0.002 0.002 0.002 0.002 0.00 watchdog/1[12] 2 1 0.004 0.004 0.004 0.004 0.00 ... Terminated tasks: sleep[7220] 7219 3 0.770 0.087 0.256 0.576 62.28 Idle stats: CPU 0 idle for 2352.006 msec CPU 1 idle for 2764.497 msec CPU 2 idle for 2998.229 msec CPU 3 idle for 2967.800 msec Total number of unique tasks: 52 Total number of context switches: 2532 Total run time (msec): 218.036 Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Ingo Molnar <mingo@kernel.org> Acked-by: Jiri Olsa <jolsa@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/20161116060634.28477-5-namhyung@kernel.org [ Add documentation from last commit, so that docs comes with the cset that introduces the feature ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-11-16 14:06:30 +08:00
return;
printf("\nIdle stats:\n");
for (i = 0; i < idle_max_cpu; ++i) {
perf sched timehist: Add summary options The -s/--summary option is to show process runtime statistics. And the -S/--with-summary option is to show the stats with the normal output. $ perf sched timehist -s Runtime summary comm parent sched-in run-time min-run avg-run max-run stddev (count) (msec) (msec) (msec) (msec) % --------------------------------------------------------------------------------------------------------- ksoftirqd/0[3] 2 2 0.011 0.004 0.005 0.006 14.87 rcu_preempt[7] 2 11 0.071 0.002 0.006 0.017 20.23 watchdog/0[11] 2 1 0.002 0.002 0.002 0.002 0.00 watchdog/1[12] 2 1 0.004 0.004 0.004 0.004 0.00 ... Terminated tasks: sleep[7220] 7219 3 0.770 0.087 0.256 0.576 62.28 Idle stats: CPU 0 idle for 2352.006 msec CPU 1 idle for 2764.497 msec CPU 2 idle for 2998.229 msec CPU 3 idle for 2967.800 msec Total number of unique tasks: 52 Total number of context switches: 2532 Total run time (msec): 218.036 Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Ingo Molnar <mingo@kernel.org> Acked-by: Jiri Olsa <jolsa@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/20161116060634.28477-5-namhyung@kernel.org [ Add documentation from last commit, so that docs comes with the cset that introduces the feature ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-11-16 14:06:30 +08:00
t = idle_threads[i];
if (!t)
continue;
r = thread__priv(t);
if (r && r->run_stats.n) {
totals.sched_count += r->run_stats.n;
printf(" CPU %2d idle for ", i);
print_sched_time(r->total_run_time, 6);
printf(" msec (%6.2f%%)\n", 100.0 * r->total_run_time / hist_time);
perf sched timehist: Add summary options The -s/--summary option is to show process runtime statistics. And the -S/--with-summary option is to show the stats with the normal output. $ perf sched timehist -s Runtime summary comm parent sched-in run-time min-run avg-run max-run stddev (count) (msec) (msec) (msec) (msec) % --------------------------------------------------------------------------------------------------------- ksoftirqd/0[3] 2 2 0.011 0.004 0.005 0.006 14.87 rcu_preempt[7] 2 11 0.071 0.002 0.006 0.017 20.23 watchdog/0[11] 2 1 0.002 0.002 0.002 0.002 0.00 watchdog/1[12] 2 1 0.004 0.004 0.004 0.004 0.00 ... Terminated tasks: sleep[7220] 7219 3 0.770 0.087 0.256 0.576 62.28 Idle stats: CPU 0 idle for 2352.006 msec CPU 1 idle for 2764.497 msec CPU 2 idle for 2998.229 msec CPU 3 idle for 2967.800 msec Total number of unique tasks: 52 Total number of context switches: 2532 Total run time (msec): 218.036 Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Ingo Molnar <mingo@kernel.org> Acked-by: Jiri Olsa <jolsa@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/20161116060634.28477-5-namhyung@kernel.org [ Add documentation from last commit, so that docs comes with the cset that introduces the feature ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-11-16 14:06:30 +08:00
} else
printf(" CPU %2d idle entire time window\n", i);
}
if (sched->idle_hist && sched->show_callchain) {
perf sched timehist: Show callchains for idle stat When --idle-hist option is used with --summary, it now shows idle stats with callchains like below: Idle stats by callchain: CPU 0: 902.195 msec Idle time (msec) Count Callchains ---------------- ------- -------------------------------------------------- 370.589 69 futex_wait_queue_me <- futex_wait <- do_futex <- sys_futex <- entry_SYSCALL_64_fastpath 178.799 17 worker_thread <- kthread <- ret_from_fork 128.352 17 schedule_timeout <- rcu_gp_kthread <- kthread <- ret_from_fork 125.111 19 schedule_hrtimeout_range_clock <- schedule_hrtimeout_range <- poll_schedule_timeout <- do_select <- core_sys_select 71.599 50 schedule_hrtimeout_range_clock <- schedule_hrtimeout_range <- poll_schedule_timeout <- do_sys_poll <- sys_poll 23.146 1 rcu_gp_kthread <- kthread <- ret_from_fork 4.510 1 schedule_hrtimeout_range_clock <- schedule_hrtimeout_range <- ep_poll <- sys_epoll_wait <- do_syscall_64 0.085 1 schedule_hrtimeout_range_clock <- schedule_hrtimeout_range <- poll_schedule_timeout <- do_sys_poll <- do_restart_poll ... Committer notes: Extra testing: # uname -a Linux jouet 4.8.8-300.fc25.x86_64 #1 SMP Tue Nov 15 18:10:06 UTC 2016 x86_64 x86_64 x86_64 GNU/Linux 1) Run 'perf sched record -g' 2) Run 'perf sched timehist --idle --summary' <SNIP> Idle stats by callchain: CPU 0: 13456.840 msec Idle time (msec) Count Callchains ---------------- ----- -------------------------------------------------- 5386.637 3283 schedule_hrtimeout_range_clock <- schedule_hrtimeout_range <- poll_schedule_timeout <- do_sys_poll <- sys_poll 2750.238 2299 futex_wait_queue_me <- futex_wait <- do_futex <- sys_futex <- do_syscall_64 1275.672 1287 schedule_hrtimeout_range_clock <- schedule_hrtimeout_range <- ep_poll <- sys_epoll_wait <- entry_SYSCALL_64_fastpath 936.322 452 worker_thread <- kthread <- ret_from_fork 741.311 385 rcu_nocb_kthread <- kthread <- ret_from_fork 729.385 248 schedule_hrtimeout_range_clock <- schedule_hrtimeout_range <- poll_schedule_timeout <- do_sys_poll <- sys_ppoll 365.386 229 irq_thread <- kthread <- ret_from_fork 338.934 265 futex_wait_queue_me <- futex_wait <- do_futex <- sys_futex <- entry_SYSCALL_64_fastpath 219.488 201 schedule_timeout <- rcu_gp_kthread <- kthread <- ret_from_fork 186.839 410 schedule_hrtimeout_range_clock <- schedule_hrtimeout_range <- ep_poll <- sys_epoll_wait <- do_syscall_64 142.541 59 kvm_vcpu_block <- kvm_arch_vcpu_ioctl_run <- kvm_vcpu_ioctl <- do_vfs_ioctl <- sys_ioctl 83.887 92 smpboot_thread_fn <- kthread <- ret_from_fork 62.722 96 do_exit <- do_group_exit <- 0x2a5594 <- entry_SYSCALL_64_fastpath 47.894 83 pipe_wait <- pipe_read <- __vfs_read <- vfs_read <- sys_read 46.554 61 rcu_gp_kthread <- kthread <- ret_from_fork 34.337 21 schedule_timeout <- intel_fbc_work_fn <- process_one_work <- worker_thread <- kthread 29.521 14 schedule_hrtimeout_range_clock <- schedule_hrtimeout_range <- poll_schedule_timeout <- do_select <- core_sys_select 20.274 10 schedule_timeout <- io_schedule_timeout <- bit_wait_io <- __wait_on_bit <- out_of_line_wait_on_bit 15.085 55 schedule_timeout <- unix_stream_read_generic <- unix_stream_recvmsg <- sock_recvmsg <- SYSC_recvfrom <SNIP> Signed-off-by: Namhyung Kim <namhyung@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Acked-by: David Ahern <dsahern@gmail.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20161208144755.16673-7-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-12-08 22:47:55 +08:00
callchain_param.mode = CHAIN_FOLDED;
callchain_param.value = CCVAL_PERIOD;
callchain_register_param(&callchain_param);
printf("\nIdle stats by callchain:\n");
for (i = 0; i < idle_max_cpu; ++i) {
struct idle_thread_runtime *itr;
t = idle_threads[i];
if (!t)
continue;
itr = thread__priv(t);
if (itr == NULL)
continue;
callchain_param.sort(&itr->sorted_root.rb_root, &itr->callchain,
perf sched timehist: Show callchains for idle stat When --idle-hist option is used with --summary, it now shows idle stats with callchains like below: Idle stats by callchain: CPU 0: 902.195 msec Idle time (msec) Count Callchains ---------------- ------- -------------------------------------------------- 370.589 69 futex_wait_queue_me <- futex_wait <- do_futex <- sys_futex <- entry_SYSCALL_64_fastpath 178.799 17 worker_thread <- kthread <- ret_from_fork 128.352 17 schedule_timeout <- rcu_gp_kthread <- kthread <- ret_from_fork 125.111 19 schedule_hrtimeout_range_clock <- schedule_hrtimeout_range <- poll_schedule_timeout <- do_select <- core_sys_select 71.599 50 schedule_hrtimeout_range_clock <- schedule_hrtimeout_range <- poll_schedule_timeout <- do_sys_poll <- sys_poll 23.146 1 rcu_gp_kthread <- kthread <- ret_from_fork 4.510 1 schedule_hrtimeout_range_clock <- schedule_hrtimeout_range <- ep_poll <- sys_epoll_wait <- do_syscall_64 0.085 1 schedule_hrtimeout_range_clock <- schedule_hrtimeout_range <- poll_schedule_timeout <- do_sys_poll <- do_restart_poll ... Committer notes: Extra testing: # uname -a Linux jouet 4.8.8-300.fc25.x86_64 #1 SMP Tue Nov 15 18:10:06 UTC 2016 x86_64 x86_64 x86_64 GNU/Linux 1) Run 'perf sched record -g' 2) Run 'perf sched timehist --idle --summary' <SNIP> Idle stats by callchain: CPU 0: 13456.840 msec Idle time (msec) Count Callchains ---------------- ----- -------------------------------------------------- 5386.637 3283 schedule_hrtimeout_range_clock <- schedule_hrtimeout_range <- poll_schedule_timeout <- do_sys_poll <- sys_poll 2750.238 2299 futex_wait_queue_me <- futex_wait <- do_futex <- sys_futex <- do_syscall_64 1275.672 1287 schedule_hrtimeout_range_clock <- schedule_hrtimeout_range <- ep_poll <- sys_epoll_wait <- entry_SYSCALL_64_fastpath 936.322 452 worker_thread <- kthread <- ret_from_fork 741.311 385 rcu_nocb_kthread <- kthread <- ret_from_fork 729.385 248 schedule_hrtimeout_range_clock <- schedule_hrtimeout_range <- poll_schedule_timeout <- do_sys_poll <- sys_ppoll 365.386 229 irq_thread <- kthread <- ret_from_fork 338.934 265 futex_wait_queue_me <- futex_wait <- do_futex <- sys_futex <- entry_SYSCALL_64_fastpath 219.488 201 schedule_timeout <- rcu_gp_kthread <- kthread <- ret_from_fork 186.839 410 schedule_hrtimeout_range_clock <- schedule_hrtimeout_range <- ep_poll <- sys_epoll_wait <- do_syscall_64 142.541 59 kvm_vcpu_block <- kvm_arch_vcpu_ioctl_run <- kvm_vcpu_ioctl <- do_vfs_ioctl <- sys_ioctl 83.887 92 smpboot_thread_fn <- kthread <- ret_from_fork 62.722 96 do_exit <- do_group_exit <- 0x2a5594 <- entry_SYSCALL_64_fastpath 47.894 83 pipe_wait <- pipe_read <- __vfs_read <- vfs_read <- sys_read 46.554 61 rcu_gp_kthread <- kthread <- ret_from_fork 34.337 21 schedule_timeout <- intel_fbc_work_fn <- process_one_work <- worker_thread <- kthread 29.521 14 schedule_hrtimeout_range_clock <- schedule_hrtimeout_range <- poll_schedule_timeout <- do_select <- core_sys_select 20.274 10 schedule_timeout <- io_schedule_timeout <- bit_wait_io <- __wait_on_bit <- out_of_line_wait_on_bit 15.085 55 schedule_timeout <- unix_stream_read_generic <- unix_stream_recvmsg <- sock_recvmsg <- SYSC_recvfrom <SNIP> Signed-off-by: Namhyung Kim <namhyung@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Acked-by: David Ahern <dsahern@gmail.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20161208144755.16673-7-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-12-08 22:47:55 +08:00
0, &callchain_param);
printf(" CPU %2d:", i);
print_sched_time(itr->tr.total_run_time, 6);
printf(" msec\n");
timehist_print_idlehist_callchain(&itr->sorted_root);
printf("\n");
}
}
perf sched timehist: Add summary options The -s/--summary option is to show process runtime statistics. And the -S/--with-summary option is to show the stats with the normal output. $ perf sched timehist -s Runtime summary comm parent sched-in run-time min-run avg-run max-run stddev (count) (msec) (msec) (msec) (msec) % --------------------------------------------------------------------------------------------------------- ksoftirqd/0[3] 2 2 0.011 0.004 0.005 0.006 14.87 rcu_preempt[7] 2 11 0.071 0.002 0.006 0.017 20.23 watchdog/0[11] 2 1 0.002 0.002 0.002 0.002 0.00 watchdog/1[12] 2 1 0.004 0.004 0.004 0.004 0.00 ... Terminated tasks: sleep[7220] 7219 3 0.770 0.087 0.256 0.576 62.28 Idle stats: CPU 0 idle for 2352.006 msec CPU 1 idle for 2764.497 msec CPU 2 idle for 2998.229 msec CPU 3 idle for 2967.800 msec Total number of unique tasks: 52 Total number of context switches: 2532 Total run time (msec): 218.036 Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Ingo Molnar <mingo@kernel.org> Acked-by: Jiri Olsa <jolsa@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/20161116060634.28477-5-namhyung@kernel.org [ Add documentation from last commit, so that docs comes with the cset that introduces the feature ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-11-16 14:06:30 +08:00
printf("\n"
" Total number of unique tasks: %" PRIu64 "\n"
"Total number of context switches: %" PRIu64 "\n",
perf sched timehist: Add summary options The -s/--summary option is to show process runtime statistics. And the -S/--with-summary option is to show the stats with the normal output. $ perf sched timehist -s Runtime summary comm parent sched-in run-time min-run avg-run max-run stddev (count) (msec) (msec) (msec) (msec) % --------------------------------------------------------------------------------------------------------- ksoftirqd/0[3] 2 2 0.011 0.004 0.005 0.006 14.87 rcu_preempt[7] 2 11 0.071 0.002 0.006 0.017 20.23 watchdog/0[11] 2 1 0.002 0.002 0.002 0.002 0.00 watchdog/1[12] 2 1 0.004 0.004 0.004 0.004 0.00 ... Terminated tasks: sleep[7220] 7219 3 0.770 0.087 0.256 0.576 62.28 Idle stats: CPU 0 idle for 2352.006 msec CPU 1 idle for 2764.497 msec CPU 2 idle for 2998.229 msec CPU 3 idle for 2967.800 msec Total number of unique tasks: 52 Total number of context switches: 2532 Total run time (msec): 218.036 Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Ingo Molnar <mingo@kernel.org> Acked-by: Jiri Olsa <jolsa@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/20161116060634.28477-5-namhyung@kernel.org [ Add documentation from last commit, so that docs comes with the cset that introduces the feature ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-11-16 14:06:30 +08:00
totals.task_count, totals.sched_count);
printf(" Total run time (msec): ");
perf sched timehist: Add summary options The -s/--summary option is to show process runtime statistics. And the -S/--with-summary option is to show the stats with the normal output. $ perf sched timehist -s Runtime summary comm parent sched-in run-time min-run avg-run max-run stddev (count) (msec) (msec) (msec) (msec) % --------------------------------------------------------------------------------------------------------- ksoftirqd/0[3] 2 2 0.011 0.004 0.005 0.006 14.87 rcu_preempt[7] 2 11 0.071 0.002 0.006 0.017 20.23 watchdog/0[11] 2 1 0.002 0.002 0.002 0.002 0.00 watchdog/1[12] 2 1 0.004 0.004 0.004 0.004 0.00 ... Terminated tasks: sleep[7220] 7219 3 0.770 0.087 0.256 0.576 62.28 Idle stats: CPU 0 idle for 2352.006 msec CPU 1 idle for 2764.497 msec CPU 2 idle for 2998.229 msec CPU 3 idle for 2967.800 msec Total number of unique tasks: 52 Total number of context switches: 2532 Total run time (msec): 218.036 Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Ingo Molnar <mingo@kernel.org> Acked-by: Jiri Olsa <jolsa@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/20161116060634.28477-5-namhyung@kernel.org [ Add documentation from last commit, so that docs comes with the cset that introduces the feature ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-11-16 14:06:30 +08:00
print_sched_time(totals.total_run_time, 2);
printf("\n");
printf(" Total scheduling time (msec): ");
print_sched_time(hist_time, 2);
printf(" (x %d)\n", sched->max_cpu);
perf sched timehist: Add summary options The -s/--summary option is to show process runtime statistics. And the -S/--with-summary option is to show the stats with the normal output. $ perf sched timehist -s Runtime summary comm parent sched-in run-time min-run avg-run max-run stddev (count) (msec) (msec) (msec) (msec) % --------------------------------------------------------------------------------------------------------- ksoftirqd/0[3] 2 2 0.011 0.004 0.005 0.006 14.87 rcu_preempt[7] 2 11 0.071 0.002 0.006 0.017 20.23 watchdog/0[11] 2 1 0.002 0.002 0.002 0.002 0.00 watchdog/1[12] 2 1 0.004 0.004 0.004 0.004 0.00 ... Terminated tasks: sleep[7220] 7219 3 0.770 0.087 0.256 0.576 62.28 Idle stats: CPU 0 idle for 2352.006 msec CPU 1 idle for 2764.497 msec CPU 2 idle for 2998.229 msec CPU 3 idle for 2967.800 msec Total number of unique tasks: 52 Total number of context switches: 2532 Total run time (msec): 218.036 Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Ingo Molnar <mingo@kernel.org> Acked-by: Jiri Olsa <jolsa@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/20161116060634.28477-5-namhyung@kernel.org [ Add documentation from last commit, so that docs comes with the cset that introduces the feature ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-11-16 14:06:30 +08:00
}
typedef int (*sched_handler)(struct perf_tool *tool,
union perf_event *event,
struct evsel *evsel,
struct perf_sample *sample,
struct machine *machine);
static int perf_timehist__process_sample(struct perf_tool *tool,
union perf_event *event,
struct perf_sample *sample,
struct evsel *evsel,
struct machine *machine)
{
struct perf_sched *sched = container_of(tool, struct perf_sched, tool);
int err = 0;
int this_cpu = sample->cpu;
if (this_cpu > sched->max_cpu)
sched->max_cpu = this_cpu;
if (evsel->handler != NULL) {
sched_handler f = evsel->handler;
err = f(tool, event, evsel, sample, machine);
}
return err;
}
perf sched timehist: Add call graph options If callchains were recorded they are appended to the line with a default stack depth of 5: 1.874569 [0011] gcc[31949] 0.014 0.000 1.148 wait_for_completion_killable <- do_fork <- sys_vfork <- stub_vfork <- __vfork 1.874591 [0010] gcc[31951] 0.000 0.000 0.024 __cond_resched <- _cond_resched <- wait_for_completion <- stop_one_cpu <- sched_exec 1.874603 [0010] migration/10[59] 3.350 0.004 0.011 smpboot_thread_fn <- kthread <- ret_from_fork 1.874604 [0011] <idle> 1.148 0.000 0.035 cpu_startup_entry <- start_secondary 1.874723 [0005] <idle> 0.016 0.000 1.383 cpu_startup_entry <- start_secondary 1.874746 [0005] gcc[31949] 0.153 0.078 0.022 do_wait sys_wait4 <- system_call_fastpath <- __GI___waitpid --no-call-graph can be used to not show the callchains. --max-stack is used to control the number of frames shown (default of 5). -x/--excl options can be used to collapse redundant callchains to get more relevant data on screen. Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Ingo Molnar <mingo@kernel.org> Acked-by: Jiri Olsa <jolsa@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/20161116060634.28477-7-namhyung@kernel.org [ Add documentation based on above commit message ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-11-16 14:06:32 +08:00
static int timehist_check_attr(struct perf_sched *sched,
struct evlist *evlist)
perf sched timehist: Add call graph options If callchains were recorded they are appended to the line with a default stack depth of 5: 1.874569 [0011] gcc[31949] 0.014 0.000 1.148 wait_for_completion_killable <- do_fork <- sys_vfork <- stub_vfork <- __vfork 1.874591 [0010] gcc[31951] 0.000 0.000 0.024 __cond_resched <- _cond_resched <- wait_for_completion <- stop_one_cpu <- sched_exec 1.874603 [0010] migration/10[59] 3.350 0.004 0.011 smpboot_thread_fn <- kthread <- ret_from_fork 1.874604 [0011] <idle> 1.148 0.000 0.035 cpu_startup_entry <- start_secondary 1.874723 [0005] <idle> 0.016 0.000 1.383 cpu_startup_entry <- start_secondary 1.874746 [0005] gcc[31949] 0.153 0.078 0.022 do_wait sys_wait4 <- system_call_fastpath <- __GI___waitpid --no-call-graph can be used to not show the callchains. --max-stack is used to control the number of frames shown (default of 5). -x/--excl options can be used to collapse redundant callchains to get more relevant data on screen. Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Ingo Molnar <mingo@kernel.org> Acked-by: Jiri Olsa <jolsa@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/20161116060634.28477-7-namhyung@kernel.org [ Add documentation based on above commit message ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-11-16 14:06:32 +08:00
{
struct evsel *evsel;
perf sched timehist: Add call graph options If callchains were recorded they are appended to the line with a default stack depth of 5: 1.874569 [0011] gcc[31949] 0.014 0.000 1.148 wait_for_completion_killable <- do_fork <- sys_vfork <- stub_vfork <- __vfork 1.874591 [0010] gcc[31951] 0.000 0.000 0.024 __cond_resched <- _cond_resched <- wait_for_completion <- stop_one_cpu <- sched_exec 1.874603 [0010] migration/10[59] 3.350 0.004 0.011 smpboot_thread_fn <- kthread <- ret_from_fork 1.874604 [0011] <idle> 1.148 0.000 0.035 cpu_startup_entry <- start_secondary 1.874723 [0005] <idle> 0.016 0.000 1.383 cpu_startup_entry <- start_secondary 1.874746 [0005] gcc[31949] 0.153 0.078 0.022 do_wait sys_wait4 <- system_call_fastpath <- __GI___waitpid --no-call-graph can be used to not show the callchains. --max-stack is used to control the number of frames shown (default of 5). -x/--excl options can be used to collapse redundant callchains to get more relevant data on screen. Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Ingo Molnar <mingo@kernel.org> Acked-by: Jiri Olsa <jolsa@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/20161116060634.28477-7-namhyung@kernel.org [ Add documentation based on above commit message ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-11-16 14:06:32 +08:00
struct evsel_runtime *er;
list_for_each_entry(evsel, &evlist->core.entries, core.node) {
perf sched timehist: Add call graph options If callchains were recorded they are appended to the line with a default stack depth of 5: 1.874569 [0011] gcc[31949] 0.014 0.000 1.148 wait_for_completion_killable <- do_fork <- sys_vfork <- stub_vfork <- __vfork 1.874591 [0010] gcc[31951] 0.000 0.000 0.024 __cond_resched <- _cond_resched <- wait_for_completion <- stop_one_cpu <- sched_exec 1.874603 [0010] migration/10[59] 3.350 0.004 0.011 smpboot_thread_fn <- kthread <- ret_from_fork 1.874604 [0011] <idle> 1.148 0.000 0.035 cpu_startup_entry <- start_secondary 1.874723 [0005] <idle> 0.016 0.000 1.383 cpu_startup_entry <- start_secondary 1.874746 [0005] gcc[31949] 0.153 0.078 0.022 do_wait sys_wait4 <- system_call_fastpath <- __GI___waitpid --no-call-graph can be used to not show the callchains. --max-stack is used to control the number of frames shown (default of 5). -x/--excl options can be used to collapse redundant callchains to get more relevant data on screen. Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Ingo Molnar <mingo@kernel.org> Acked-by: Jiri Olsa <jolsa@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/20161116060634.28477-7-namhyung@kernel.org [ Add documentation based on above commit message ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-11-16 14:06:32 +08:00
er = perf_evsel__get_runtime(evsel);
if (er == NULL) {
pr_err("Failed to allocate memory for evsel runtime data\n");
return -1;
}
if (sched->show_callchain && !evsel__has_callchain(evsel)) {
perf sched timehist: Add call graph options If callchains were recorded they are appended to the line with a default stack depth of 5: 1.874569 [0011] gcc[31949] 0.014 0.000 1.148 wait_for_completion_killable <- do_fork <- sys_vfork <- stub_vfork <- __vfork 1.874591 [0010] gcc[31951] 0.000 0.000 0.024 __cond_resched <- _cond_resched <- wait_for_completion <- stop_one_cpu <- sched_exec 1.874603 [0010] migration/10[59] 3.350 0.004 0.011 smpboot_thread_fn <- kthread <- ret_from_fork 1.874604 [0011] <idle> 1.148 0.000 0.035 cpu_startup_entry <- start_secondary 1.874723 [0005] <idle> 0.016 0.000 1.383 cpu_startup_entry <- start_secondary 1.874746 [0005] gcc[31949] 0.153 0.078 0.022 do_wait sys_wait4 <- system_call_fastpath <- __GI___waitpid --no-call-graph can be used to not show the callchains. --max-stack is used to control the number of frames shown (default of 5). -x/--excl options can be used to collapse redundant callchains to get more relevant data on screen. Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Ingo Molnar <mingo@kernel.org> Acked-by: Jiri Olsa <jolsa@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/20161116060634.28477-7-namhyung@kernel.org [ Add documentation based on above commit message ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-11-16 14:06:32 +08:00
pr_info("Samples do not have callchains.\n");
sched->show_callchain = 0;
symbol_conf.use_callchain = 0;
}
}
return 0;
}
static int perf_sched__timehist(struct perf_sched *sched)
{
const struct evsel_str_handler handlers[] = {
{ "sched:sched_switch", timehist_sched_switch_event, },
{ "sched:sched_wakeup", timehist_sched_wakeup_event, },
{ "sched:sched_wakeup_new", timehist_sched_wakeup_event, },
};
const struct evsel_str_handler migrate_handlers[] = {
{ "sched:sched_migrate_task", timehist_migrate_task_event, },
};
struct perf_data data = {
.path = input_name,
.mode = PERF_DATA_MODE_READ,
.force = sched->force,
};
struct perf_session *session;
struct evlist *evlist;
int err = -1;
/*
* event handlers for timehist option
*/
sched->tool.sample = perf_timehist__process_sample;
sched->tool.mmap = perf_event__process_mmap;
sched->tool.comm = perf_event__process_comm;
sched->tool.exit = perf_event__process_exit;
sched->tool.fork = perf_event__process_fork;
sched->tool.lost = process_lost;
sched->tool.attr = perf_event__process_attr;
sched->tool.tracing_data = perf_event__process_tracing_data;
sched->tool.build_id = perf_event__process_build_id;
sched->tool.ordered_events = true;
sched->tool.ordering_requires_timestamps = true;
perf sched timehist: Add call graph options If callchains were recorded they are appended to the line with a default stack depth of 5: 1.874569 [0011] gcc[31949] 0.014 0.000 1.148 wait_for_completion_killable <- do_fork <- sys_vfork <- stub_vfork <- __vfork 1.874591 [0010] gcc[31951] 0.000 0.000 0.024 __cond_resched <- _cond_resched <- wait_for_completion <- stop_one_cpu <- sched_exec 1.874603 [0010] migration/10[59] 3.350 0.004 0.011 smpboot_thread_fn <- kthread <- ret_from_fork 1.874604 [0011] <idle> 1.148 0.000 0.035 cpu_startup_entry <- start_secondary 1.874723 [0005] <idle> 0.016 0.000 1.383 cpu_startup_entry <- start_secondary 1.874746 [0005] gcc[31949] 0.153 0.078 0.022 do_wait sys_wait4 <- system_call_fastpath <- __GI___waitpid --no-call-graph can be used to not show the callchains. --max-stack is used to control the number of frames shown (default of 5). -x/--excl options can be used to collapse redundant callchains to get more relevant data on screen. Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Ingo Molnar <mingo@kernel.org> Acked-by: Jiri Olsa <jolsa@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/20161116060634.28477-7-namhyung@kernel.org [ Add documentation based on above commit message ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-11-16 14:06:32 +08:00
symbol_conf.use_callchain = sched->show_callchain;
session = perf_session__new(&data, false, &sched->tool);
perf session: Return error code for perf_session__new() function on failure This patch is to return error code of perf_new_session function on failure instead of NULL. Test Results: Before Fix: $ perf c2c report -input failed to open nput: No such file or directory $ echo $? 0 $ After Fix: $ perf c2c report -input failed to open nput: No such file or directory $ echo $? 254 $ Committer notes: Fix 'perf tests topology' case, where we use that TEST_ASSERT_VAL(..., session), i.e. we need to pass zero in case of failure, which was the case before when NULL was returned by perf_session__new() for failure, but now we need to negate the result of IS_ERR(session) to respect that TEST_ASSERT_VAL) expectation of zero meaning failure. Reported-by: Nageswara R Sastry <rnsastry@linux.vnet.ibm.com> Signed-off-by: Mamatha Inamdar <mamatha4@linux.vnet.ibm.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Tested-by: Nageswara R Sastry <rnsastry@linux.vnet.ibm.com> Acked-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com> Reviewed-by: Jiri Olsa <jolsa@redhat.com> Reviewed-by: Mukesh Ojha <mojha@codeaurora.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alexey Budankov <alexey.budankov@linux.intel.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Jeremie Galarneau <jeremie.galarneau@efficios.com> Cc: Kate Stewart <kstewart@linuxfoundation.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Shawn Landden <shawn@git.icu> Cc: Song Liu <songliubraving@fb.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tzvetomir Stoyanov <tstoyanov@vmware.com> Link: http://lore.kernel.org/lkml/20190822071223.17892.45782.stgit@localhost.localdomain Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-08-22 15:20:49 +08:00
if (IS_ERR(session))
return PTR_ERR(session);
perf sched timehist: Add summary options The -s/--summary option is to show process runtime statistics. And the -S/--with-summary option is to show the stats with the normal output. $ perf sched timehist -s Runtime summary comm parent sched-in run-time min-run avg-run max-run stddev (count) (msec) (msec) (msec) (msec) % --------------------------------------------------------------------------------------------------------- ksoftirqd/0[3] 2 2 0.011 0.004 0.005 0.006 14.87 rcu_preempt[7] 2 11 0.071 0.002 0.006 0.017 20.23 watchdog/0[11] 2 1 0.002 0.002 0.002 0.002 0.00 watchdog/1[12] 2 1 0.004 0.004 0.004 0.004 0.00 ... Terminated tasks: sleep[7220] 7219 3 0.770 0.087 0.256 0.576 62.28 Idle stats: CPU 0 idle for 2352.006 msec CPU 1 idle for 2764.497 msec CPU 2 idle for 2998.229 msec CPU 3 idle for 2967.800 msec Total number of unique tasks: 52 Total number of context switches: 2532 Total run time (msec): 218.036 Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Ingo Molnar <mingo@kernel.org> Acked-by: Jiri Olsa <jolsa@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/20161116060634.28477-5-namhyung@kernel.org [ Add documentation from last commit, so that docs comes with the cset that introduces the feature ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-11-16 14:06:30 +08:00
evlist = session->evlist;
symbol__init(&session->header.env);
perf sched timehist: Add option to specify time window of interest Add option to allow user to control analysis window. e.g., collect data for time window and analyze a segment of interest within that window. Committer notes: Testing it: # perf sched record -a usleep 1 [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 1.593 MB perf.data (25 samples) ] # # perf sched timehist | head -18 Samples do not have callchains. time cpu task name wait time sch delay run time [tid/pid] (msec) (msec) (msec) ------------- ------ --------------- --------- --------- -------- 19818.635579 [0002] <idle> 0.000 0.000 0.000 19818.635613 [0000] perf[9116] 0.000 0.000 0.000 19818.635676 [0000] <idle> 0.000 0.000 0.063 19818.635678 [0000] rcuos/2[29] 0.000 0.002 0.001 19818.635696 [0002] perf[9117] 0.000 0.004 0.116 19818.635702 [0000] <idle> 0.001 0.000 0.024 19818.635709 [0002] migration/2[25] 0.000 0.003 0.012 19818.636263 [0000] usleep[9117] 0.005 0.000 0.560 19818.636316 [0000] <idle> 0.560 0.000 0.053 19818.636358 [0002] <idle> 0.129 0.000 0.649 19818.636358 [0000] usleep[9117] 0.053 0.002 0.042 # # perf sched timehist --time 19818.635696, Samples do not have callchains. time cpu task name wait time sch delay run time [tid/pid] (msec) (msec) (msec) ------------- ------ --------------- -------- --------- --------- 19818.635696 [0002] perf[9117] 0.000 0.120 0.000 19818.635702 [0000] <idle> 0.019 0.000 0.006 19818.635709 [0002] migration/2[25] 0.000 0.003 0.012 19818.636263 [0000] usleep[9117] 0.005 0.000 0.560 19818.636316 [0000] <idle> 0.560 0.000 0.053 19818.636358 [0002] <idle> 0.129 0.000 0.649 19818.636358 [0000] usleep[9117] 0.053 0.002 0.042 # # perf sched timehist --time 19818.635696,19818.635709 Samples do not have callchains. time cpu task name wait time sch delay run time [tid/pid] (msec) (msec) (msec) ------------- ------ --------------- --------- --------- --------- 19818.635696 [0002] perf[9117] 0.000 0.120 0.000 19818.635702 [0000] <idle> 0.019 0.000 0.006 19818.635709 [0002] migration/2[25] 0.000 0.003 0.012 19818.635709 [0000] usleep[9117] 0.005 0.000 0.006 # Signed-off-by: David Ahern <dsahern@gmail.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Acked-by: Namhyung Kim <namhyung@kernel.org> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1480439746-42695-5-git-send-email-dsahern@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-11-30 01:15:44 +08:00
if (perf_time__parse_str(&sched->ptime, sched->time_str) != 0) {
pr_err("Invalid time string\n");
return -EINVAL;
}
perf sched timehist: Add call graph options If callchains were recorded they are appended to the line with a default stack depth of 5: 1.874569 [0011] gcc[31949] 0.014 0.000 1.148 wait_for_completion_killable <- do_fork <- sys_vfork <- stub_vfork <- __vfork 1.874591 [0010] gcc[31951] 0.000 0.000 0.024 __cond_resched <- _cond_resched <- wait_for_completion <- stop_one_cpu <- sched_exec 1.874603 [0010] migration/10[59] 3.350 0.004 0.011 smpboot_thread_fn <- kthread <- ret_from_fork 1.874604 [0011] <idle> 1.148 0.000 0.035 cpu_startup_entry <- start_secondary 1.874723 [0005] <idle> 0.016 0.000 1.383 cpu_startup_entry <- start_secondary 1.874746 [0005] gcc[31949] 0.153 0.078 0.022 do_wait sys_wait4 <- system_call_fastpath <- __GI___waitpid --no-call-graph can be used to not show the callchains. --max-stack is used to control the number of frames shown (default of 5). -x/--excl options can be used to collapse redundant callchains to get more relevant data on screen. Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Ingo Molnar <mingo@kernel.org> Acked-by: Jiri Olsa <jolsa@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/20161116060634.28477-7-namhyung@kernel.org [ Add documentation based on above commit message ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-11-16 14:06:32 +08:00
if (timehist_check_attr(sched, evlist) != 0)
goto out;
setup_pager();
/* setup per-evsel handlers */
if (perf_session__set_tracepoints_handlers(session, handlers))
goto out;
/* sched_switch event at a minimum needs to exist */
if (!perf_evlist__find_tracepoint_by_name(session->evlist,
"sched:sched_switch")) {
pr_err("No sched_switch events found. Have you run 'perf sched record'?\n");
goto out;
}
if (sched->show_migrations &&
perf_session__set_tracepoints_handlers(session, migrate_handlers))
goto out;
/* pre-allocate struct for per-CPU idle stats */
sched->max_cpu = session->header.env.nr_cpus_online;
if (sched->max_cpu == 0)
sched->max_cpu = 4;
if (init_idle_threads(sched->max_cpu))
goto out;
perf sched timehist: Add summary options The -s/--summary option is to show process runtime statistics. And the -S/--with-summary option is to show the stats with the normal output. $ perf sched timehist -s Runtime summary comm parent sched-in run-time min-run avg-run max-run stddev (count) (msec) (msec) (msec) (msec) % --------------------------------------------------------------------------------------------------------- ksoftirqd/0[3] 2 2 0.011 0.004 0.005 0.006 14.87 rcu_preempt[7] 2 11 0.071 0.002 0.006 0.017 20.23 watchdog/0[11] 2 1 0.002 0.002 0.002 0.002 0.00 watchdog/1[12] 2 1 0.004 0.004 0.004 0.004 0.00 ... Terminated tasks: sleep[7220] 7219 3 0.770 0.087 0.256 0.576 62.28 Idle stats: CPU 0 idle for 2352.006 msec CPU 1 idle for 2764.497 msec CPU 2 idle for 2998.229 msec CPU 3 idle for 2967.800 msec Total number of unique tasks: 52 Total number of context switches: 2532 Total run time (msec): 218.036 Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Ingo Molnar <mingo@kernel.org> Acked-by: Jiri Olsa <jolsa@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/20161116060634.28477-5-namhyung@kernel.org [ Add documentation from last commit, so that docs comes with the cset that introduces the feature ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-11-16 14:06:30 +08:00
/* summary_only implies summary option, but don't overwrite summary if set */
if (sched->summary_only)
sched->summary = sched->summary_only;
if (!sched->summary_only)
timehist_header(sched);
err = perf_session__process_events(session);
if (err) {
pr_err("Failed to process events, error %d", err);
goto out;
}
perf sched timehist: Add summary options The -s/--summary option is to show process runtime statistics. And the -S/--with-summary option is to show the stats with the normal output. $ perf sched timehist -s Runtime summary comm parent sched-in run-time min-run avg-run max-run stddev (count) (msec) (msec) (msec) (msec) % --------------------------------------------------------------------------------------------------------- ksoftirqd/0[3] 2 2 0.011 0.004 0.005 0.006 14.87 rcu_preempt[7] 2 11 0.071 0.002 0.006 0.017 20.23 watchdog/0[11] 2 1 0.002 0.002 0.002 0.002 0.00 watchdog/1[12] 2 1 0.004 0.004 0.004 0.004 0.00 ... Terminated tasks: sleep[7220] 7219 3 0.770 0.087 0.256 0.576 62.28 Idle stats: CPU 0 idle for 2352.006 msec CPU 1 idle for 2764.497 msec CPU 2 idle for 2998.229 msec CPU 3 idle for 2967.800 msec Total number of unique tasks: 52 Total number of context switches: 2532 Total run time (msec): 218.036 Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Ingo Molnar <mingo@kernel.org> Acked-by: Jiri Olsa <jolsa@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/20161116060634.28477-5-namhyung@kernel.org [ Add documentation from last commit, so that docs comes with the cset that introduces the feature ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-11-16 14:06:30 +08:00
sched->nr_events = evlist->stats.nr_events[0];
sched->nr_lost_events = evlist->stats.total_lost;
sched->nr_lost_chunks = evlist->stats.nr_events[PERF_RECORD_LOST];
if (sched->summary)
timehist_print_summary(sched, session);
out:
free_idle_threads();
perf_session__delete(session);
return err;
}
static void print_bad_events(struct perf_sched *sched)
perf sched: Add 'perf sched map' scheduling event map printout This prints a textual context-switching outline of workload captured via perf sched record. For example, on a 16 CPU box it outputs: N1 O1 . . . S1 . . . B0 . *I0 C1 . M1 . 23002.773423 secs N1 O1 . *Q0 . S1 . . . B0 . I0 C1 . M1 . 23002.773423 secs N1 O1 . Q0 . S1 . . . B0 . *R1 C1 . M1 . 23002.773485 secs N1 O1 . Q0 . S1 . *S0 . B0 . R1 C1 . M1 . 23002.773478 secs *L0 O1 . Q0 . S1 . S0 . B0 . R1 C1 . M1 . 23002.773523 secs L0 O1 . *. . S1 . S0 . B0 . R1 C1 . M1 . 23002.773531 secs L0 O1 . . . S1 . S0 . B0 . R1 C1 *T1 M1 . 23002.773547 secs T1 => irqbalance:2089 L0 O1 . . . S1 . S0 . *P0 . R1 C1 T1 M1 . 23002.773549 secs *N1 O1 . . . S1 . S0 . P0 . R1 C1 T1 M1 . 23002.773566 secs N1 O1 . . . *J0 . S0 . P0 . R1 C1 T1 M1 . 23002.773571 secs N1 O1 . . . J0 . S0 *B0 P0 . R1 C1 T1 M1 . 23002.773592 secs N1 O1 . . . J0 . *U0 B0 P0 . R1 C1 T1 M1 . 23002.773582 secs N1 O1 . . . *S1 . U0 B0 P0 . R1 C1 T1 M1 . 23002.773604 secs N1 O1 . . . S1 . U0 B0 *. . R1 C1 T1 M1 . 23002.773615 secs N1 O1 . . . S1 . U0 B0 . . *K0 C1 T1 M1 . 23002.773631 secs N1 O1 . *M0 . S1 . U0 B0 . . K0 C1 T1 M1 . 23002.773624 secs N1 O1 . M0 . S1 . U0 *. . . K0 C1 T1 M1 . 23002.773644 secs N1 O1 . M0 . S1 . U0 . . . *R1 C1 T1 M1 . 23002.773662 secs N1 O1 . M0 . S1 . *. . . . R1 C1 T1 M1 . 23002.773648 secs N1 O1 . *. . S1 . . . . . R1 C1 T1 M1 . 23002.773680 secs N1 O1 . . . *L0 . . . . . R1 C1 T1 M1 . 23002.773717 secs *N0 O1 . . . L0 . . . . . R1 C1 T1 M1 . 23002.773709 secs *N1 O1 . . . L0 . . . . . R1 C1 T1 M1 . 23002.773747 secs Columns stand for individual CPUs, from CPU0 to CPU15, and the two-letter shortcuts stand for tasks that are running on a CPU. '*' denotes the CPU that had the event. A dot signals an idle CPU. New tasks are assigned new two-letter shortcuts - when they occur first they are printed. In the above example 'T1' stood for irqbalance: T1 => irqbalance:2089 Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-16 23:40:48 +08:00
{
if (sched->nr_unordered_timestamps && sched->nr_timestamps) {
perf sched: Add 'perf sched map' scheduling event map printout This prints a textual context-switching outline of workload captured via perf sched record. For example, on a 16 CPU box it outputs: N1 O1 . . . S1 . . . B0 . *I0 C1 . M1 . 23002.773423 secs N1 O1 . *Q0 . S1 . . . B0 . I0 C1 . M1 . 23002.773423 secs N1 O1 . Q0 . S1 . . . B0 . *R1 C1 . M1 . 23002.773485 secs N1 O1 . Q0 . S1 . *S0 . B0 . R1 C1 . M1 . 23002.773478 secs *L0 O1 . Q0 . S1 . S0 . B0 . R1 C1 . M1 . 23002.773523 secs L0 O1 . *. . S1 . S0 . B0 . R1 C1 . M1 . 23002.773531 secs L0 O1 . . . S1 . S0 . B0 . R1 C1 *T1 M1 . 23002.773547 secs T1 => irqbalance:2089 L0 O1 . . . S1 . S0 . *P0 . R1 C1 T1 M1 . 23002.773549 secs *N1 O1 . . . S1 . S0 . P0 . R1 C1 T1 M1 . 23002.773566 secs N1 O1 . . . *J0 . S0 . P0 . R1 C1 T1 M1 . 23002.773571 secs N1 O1 . . . J0 . S0 *B0 P0 . R1 C1 T1 M1 . 23002.773592 secs N1 O1 . . . J0 . *U0 B0 P0 . R1 C1 T1 M1 . 23002.773582 secs N1 O1 . . . *S1 . U0 B0 P0 . R1 C1 T1 M1 . 23002.773604 secs N1 O1 . . . S1 . U0 B0 *. . R1 C1 T1 M1 . 23002.773615 secs N1 O1 . . . S1 . U0 B0 . . *K0 C1 T1 M1 . 23002.773631 secs N1 O1 . *M0 . S1 . U0 B0 . . K0 C1 T1 M1 . 23002.773624 secs N1 O1 . M0 . S1 . U0 *. . . K0 C1 T1 M1 . 23002.773644 secs N1 O1 . M0 . S1 . U0 . . . *R1 C1 T1 M1 . 23002.773662 secs N1 O1 . M0 . S1 . *. . . . R1 C1 T1 M1 . 23002.773648 secs N1 O1 . *. . S1 . . . . . R1 C1 T1 M1 . 23002.773680 secs N1 O1 . . . *L0 . . . . . R1 C1 T1 M1 . 23002.773717 secs *N0 O1 . . . L0 . . . . . R1 C1 T1 M1 . 23002.773709 secs *N1 O1 . . . L0 . . . . . R1 C1 T1 M1 . 23002.773747 secs Columns stand for individual CPUs, from CPU0 to CPU15, and the two-letter shortcuts stand for tasks that are running on a CPU. '*' denotes the CPU that had the event. A dot signals an idle CPU. New tasks are assigned new two-letter shortcuts - when they occur first they are printed. In the above example 'T1' stood for irqbalance: T1 => irqbalance:2089 Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-16 23:40:48 +08:00
printf(" INFO: %.3f%% unordered timestamps (%ld out of %ld)\n",
(double)sched->nr_unordered_timestamps/(double)sched->nr_timestamps*100.0,
sched->nr_unordered_timestamps, sched->nr_timestamps);
perf sched: Add 'perf sched map' scheduling event map printout This prints a textual context-switching outline of workload captured via perf sched record. For example, on a 16 CPU box it outputs: N1 O1 . . . S1 . . . B0 . *I0 C1 . M1 . 23002.773423 secs N1 O1 . *Q0 . S1 . . . B0 . I0 C1 . M1 . 23002.773423 secs N1 O1 . Q0 . S1 . . . B0 . *R1 C1 . M1 . 23002.773485 secs N1 O1 . Q0 . S1 . *S0 . B0 . R1 C1 . M1 . 23002.773478 secs *L0 O1 . Q0 . S1 . S0 . B0 . R1 C1 . M1 . 23002.773523 secs L0 O1 . *. . S1 . S0 . B0 . R1 C1 . M1 . 23002.773531 secs L0 O1 . . . S1 . S0 . B0 . R1 C1 *T1 M1 . 23002.773547 secs T1 => irqbalance:2089 L0 O1 . . . S1 . S0 . *P0 . R1 C1 T1 M1 . 23002.773549 secs *N1 O1 . . . S1 . S0 . P0 . R1 C1 T1 M1 . 23002.773566 secs N1 O1 . . . *J0 . S0 . P0 . R1 C1 T1 M1 . 23002.773571 secs N1 O1 . . . J0 . S0 *B0 P0 . R1 C1 T1 M1 . 23002.773592 secs N1 O1 . . . J0 . *U0 B0 P0 . R1 C1 T1 M1 . 23002.773582 secs N1 O1 . . . *S1 . U0 B0 P0 . R1 C1 T1 M1 . 23002.773604 secs N1 O1 . . . S1 . U0 B0 *. . R1 C1 T1 M1 . 23002.773615 secs N1 O1 . . . S1 . U0 B0 . . *K0 C1 T1 M1 . 23002.773631 secs N1 O1 . *M0 . S1 . U0 B0 . . K0 C1 T1 M1 . 23002.773624 secs N1 O1 . M0 . S1 . U0 *. . . K0 C1 T1 M1 . 23002.773644 secs N1 O1 . M0 . S1 . U0 . . . *R1 C1 T1 M1 . 23002.773662 secs N1 O1 . M0 . S1 . *. . . . R1 C1 T1 M1 . 23002.773648 secs N1 O1 . *. . S1 . . . . . R1 C1 T1 M1 . 23002.773680 secs N1 O1 . . . *L0 . . . . . R1 C1 T1 M1 . 23002.773717 secs *N0 O1 . . . L0 . . . . . R1 C1 T1 M1 . 23002.773709 secs *N1 O1 . . . L0 . . . . . R1 C1 T1 M1 . 23002.773747 secs Columns stand for individual CPUs, from CPU0 to CPU15, and the two-letter shortcuts stand for tasks that are running on a CPU. '*' denotes the CPU that had the event. A dot signals an idle CPU. New tasks are assigned new two-letter shortcuts - when they occur first they are printed. In the above example 'T1' stood for irqbalance: T1 => irqbalance:2089 Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-16 23:40:48 +08:00
}
if (sched->nr_lost_events && sched->nr_events) {
perf sched: Add 'perf sched map' scheduling event map printout This prints a textual context-switching outline of workload captured via perf sched record. For example, on a 16 CPU box it outputs: N1 O1 . . . S1 . . . B0 . *I0 C1 . M1 . 23002.773423 secs N1 O1 . *Q0 . S1 . . . B0 . I0 C1 . M1 . 23002.773423 secs N1 O1 . Q0 . S1 . . . B0 . *R1 C1 . M1 . 23002.773485 secs N1 O1 . Q0 . S1 . *S0 . B0 . R1 C1 . M1 . 23002.773478 secs *L0 O1 . Q0 . S1 . S0 . B0 . R1 C1 . M1 . 23002.773523 secs L0 O1 . *. . S1 . S0 . B0 . R1 C1 . M1 . 23002.773531 secs L0 O1 . . . S1 . S0 . B0 . R1 C1 *T1 M1 . 23002.773547 secs T1 => irqbalance:2089 L0 O1 . . . S1 . S0 . *P0 . R1 C1 T1 M1 . 23002.773549 secs *N1 O1 . . . S1 . S0 . P0 . R1 C1 T1 M1 . 23002.773566 secs N1 O1 . . . *J0 . S0 . P0 . R1 C1 T1 M1 . 23002.773571 secs N1 O1 . . . J0 . S0 *B0 P0 . R1 C1 T1 M1 . 23002.773592 secs N1 O1 . . . J0 . *U0 B0 P0 . R1 C1 T1 M1 . 23002.773582 secs N1 O1 . . . *S1 . U0 B0 P0 . R1 C1 T1 M1 . 23002.773604 secs N1 O1 . . . S1 . U0 B0 *. . R1 C1 T1 M1 . 23002.773615 secs N1 O1 . . . S1 . U0 B0 . . *K0 C1 T1 M1 . 23002.773631 secs N1 O1 . *M0 . S1 . U0 B0 . . K0 C1 T1 M1 . 23002.773624 secs N1 O1 . M0 . S1 . U0 *. . . K0 C1 T1 M1 . 23002.773644 secs N1 O1 . M0 . S1 . U0 . . . *R1 C1 T1 M1 . 23002.773662 secs N1 O1 . M0 . S1 . *. . . . R1 C1 T1 M1 . 23002.773648 secs N1 O1 . *. . S1 . . . . . R1 C1 T1 M1 . 23002.773680 secs N1 O1 . . . *L0 . . . . . R1 C1 T1 M1 . 23002.773717 secs *N0 O1 . . . L0 . . . . . R1 C1 T1 M1 . 23002.773709 secs *N1 O1 . . . L0 . . . . . R1 C1 T1 M1 . 23002.773747 secs Columns stand for individual CPUs, from CPU0 to CPU15, and the two-letter shortcuts stand for tasks that are running on a CPU. '*' denotes the CPU that had the event. A dot signals an idle CPU. New tasks are assigned new two-letter shortcuts - when they occur first they are printed. In the above example 'T1' stood for irqbalance: T1 => irqbalance:2089 Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-16 23:40:48 +08:00
printf(" INFO: %.3f%% lost events (%ld out of %ld, in %ld chunks)\n",
(double)sched->nr_lost_events/(double)sched->nr_events * 100.0,
sched->nr_lost_events, sched->nr_events, sched->nr_lost_chunks);
perf sched: Add 'perf sched map' scheduling event map printout This prints a textual context-switching outline of workload captured via perf sched record. For example, on a 16 CPU box it outputs: N1 O1 . . . S1 . . . B0 . *I0 C1 . M1 . 23002.773423 secs N1 O1 . *Q0 . S1 . . . B0 . I0 C1 . M1 . 23002.773423 secs N1 O1 . Q0 . S1 . . . B0 . *R1 C1 . M1 . 23002.773485 secs N1 O1 . Q0 . S1 . *S0 . B0 . R1 C1 . M1 . 23002.773478 secs *L0 O1 . Q0 . S1 . S0 . B0 . R1 C1 . M1 . 23002.773523 secs L0 O1 . *. . S1 . S0 . B0 . R1 C1 . M1 . 23002.773531 secs L0 O1 . . . S1 . S0 . B0 . R1 C1 *T1 M1 . 23002.773547 secs T1 => irqbalance:2089 L0 O1 . . . S1 . S0 . *P0 . R1 C1 T1 M1 . 23002.773549 secs *N1 O1 . . . S1 . S0 . P0 . R1 C1 T1 M1 . 23002.773566 secs N1 O1 . . . *J0 . S0 . P0 . R1 C1 T1 M1 . 23002.773571 secs N1 O1 . . . J0 . S0 *B0 P0 . R1 C1 T1 M1 . 23002.773592 secs N1 O1 . . . J0 . *U0 B0 P0 . R1 C1 T1 M1 . 23002.773582 secs N1 O1 . . . *S1 . U0 B0 P0 . R1 C1 T1 M1 . 23002.773604 secs N1 O1 . . . S1 . U0 B0 *. . R1 C1 T1 M1 . 23002.773615 secs N1 O1 . . . S1 . U0 B0 . . *K0 C1 T1 M1 . 23002.773631 secs N1 O1 . *M0 . S1 . U0 B0 . . K0 C1 T1 M1 . 23002.773624 secs N1 O1 . M0 . S1 . U0 *. . . K0 C1 T1 M1 . 23002.773644 secs N1 O1 . M0 . S1 . U0 . . . *R1 C1 T1 M1 . 23002.773662 secs N1 O1 . M0 . S1 . *. . . . R1 C1 T1 M1 . 23002.773648 secs N1 O1 . *. . S1 . . . . . R1 C1 T1 M1 . 23002.773680 secs N1 O1 . . . *L0 . . . . . R1 C1 T1 M1 . 23002.773717 secs *N0 O1 . . . L0 . . . . . R1 C1 T1 M1 . 23002.773709 secs *N1 O1 . . . L0 . . . . . R1 C1 T1 M1 . 23002.773747 secs Columns stand for individual CPUs, from CPU0 to CPU15, and the two-letter shortcuts stand for tasks that are running on a CPU. '*' denotes the CPU that had the event. A dot signals an idle CPU. New tasks are assigned new two-letter shortcuts - when they occur first they are printed. In the above example 'T1' stood for irqbalance: T1 => irqbalance:2089 Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-16 23:40:48 +08:00
}
if (sched->nr_context_switch_bugs && sched->nr_timestamps) {
perf sched: Add 'perf sched map' scheduling event map printout This prints a textual context-switching outline of workload captured via perf sched record. For example, on a 16 CPU box it outputs: N1 O1 . . . S1 . . . B0 . *I0 C1 . M1 . 23002.773423 secs N1 O1 . *Q0 . S1 . . . B0 . I0 C1 . M1 . 23002.773423 secs N1 O1 . Q0 . S1 . . . B0 . *R1 C1 . M1 . 23002.773485 secs N1 O1 . Q0 . S1 . *S0 . B0 . R1 C1 . M1 . 23002.773478 secs *L0 O1 . Q0 . S1 . S0 . B0 . R1 C1 . M1 . 23002.773523 secs L0 O1 . *. . S1 . S0 . B0 . R1 C1 . M1 . 23002.773531 secs L0 O1 . . . S1 . S0 . B0 . R1 C1 *T1 M1 . 23002.773547 secs T1 => irqbalance:2089 L0 O1 . . . S1 . S0 . *P0 . R1 C1 T1 M1 . 23002.773549 secs *N1 O1 . . . S1 . S0 . P0 . R1 C1 T1 M1 . 23002.773566 secs N1 O1 . . . *J0 . S0 . P0 . R1 C1 T1 M1 . 23002.773571 secs N1 O1 . . . J0 . S0 *B0 P0 . R1 C1 T1 M1 . 23002.773592 secs N1 O1 . . . J0 . *U0 B0 P0 . R1 C1 T1 M1 . 23002.773582 secs N1 O1 . . . *S1 . U0 B0 P0 . R1 C1 T1 M1 . 23002.773604 secs N1 O1 . . . S1 . U0 B0 *. . R1 C1 T1 M1 . 23002.773615 secs N1 O1 . . . S1 . U0 B0 . . *K0 C1 T1 M1 . 23002.773631 secs N1 O1 . *M0 . S1 . U0 B0 . . K0 C1 T1 M1 . 23002.773624 secs N1 O1 . M0 . S1 . U0 *. . . K0 C1 T1 M1 . 23002.773644 secs N1 O1 . M0 . S1 . U0 . . . *R1 C1 T1 M1 . 23002.773662 secs N1 O1 . M0 . S1 . *. . . . R1 C1 T1 M1 . 23002.773648 secs N1 O1 . *. . S1 . . . . . R1 C1 T1 M1 . 23002.773680 secs N1 O1 . . . *L0 . . . . . R1 C1 T1 M1 . 23002.773717 secs *N0 O1 . . . L0 . . . . . R1 C1 T1 M1 . 23002.773709 secs *N1 O1 . . . L0 . . . . . R1 C1 T1 M1 . 23002.773747 secs Columns stand for individual CPUs, from CPU0 to CPU15, and the two-letter shortcuts stand for tasks that are running on a CPU. '*' denotes the CPU that had the event. A dot signals an idle CPU. New tasks are assigned new two-letter shortcuts - when they occur first they are printed. In the above example 'T1' stood for irqbalance: T1 => irqbalance:2089 Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-16 23:40:48 +08:00
printf(" INFO: %.3f%% context switch bugs (%ld out of %ld)",
(double)sched->nr_context_switch_bugs/(double)sched->nr_timestamps*100.0,
sched->nr_context_switch_bugs, sched->nr_timestamps);
if (sched->nr_lost_events)
perf sched: Add 'perf sched map' scheduling event map printout This prints a textual context-switching outline of workload captured via perf sched record. For example, on a 16 CPU box it outputs: N1 O1 . . . S1 . . . B0 . *I0 C1 . M1 . 23002.773423 secs N1 O1 . *Q0 . S1 . . . B0 . I0 C1 . M1 . 23002.773423 secs N1 O1 . Q0 . S1 . . . B0 . *R1 C1 . M1 . 23002.773485 secs N1 O1 . Q0 . S1 . *S0 . B0 . R1 C1 . M1 . 23002.773478 secs *L0 O1 . Q0 . S1 . S0 . B0 . R1 C1 . M1 . 23002.773523 secs L0 O1 . *. . S1 . S0 . B0 . R1 C1 . M1 . 23002.773531 secs L0 O1 . . . S1 . S0 . B0 . R1 C1 *T1 M1 . 23002.773547 secs T1 => irqbalance:2089 L0 O1 . . . S1 . S0 . *P0 . R1 C1 T1 M1 . 23002.773549 secs *N1 O1 . . . S1 . S0 . P0 . R1 C1 T1 M1 . 23002.773566 secs N1 O1 . . . *J0 . S0 . P0 . R1 C1 T1 M1 . 23002.773571 secs N1 O1 . . . J0 . S0 *B0 P0 . R1 C1 T1 M1 . 23002.773592 secs N1 O1 . . . J0 . *U0 B0 P0 . R1 C1 T1 M1 . 23002.773582 secs N1 O1 . . . *S1 . U0 B0 P0 . R1 C1 T1 M1 . 23002.773604 secs N1 O1 . . . S1 . U0 B0 *. . R1 C1 T1 M1 . 23002.773615 secs N1 O1 . . . S1 . U0 B0 . . *K0 C1 T1 M1 . 23002.773631 secs N1 O1 . *M0 . S1 . U0 B0 . . K0 C1 T1 M1 . 23002.773624 secs N1 O1 . M0 . S1 . U0 *. . . K0 C1 T1 M1 . 23002.773644 secs N1 O1 . M0 . S1 . U0 . . . *R1 C1 T1 M1 . 23002.773662 secs N1 O1 . M0 . S1 . *. . . . R1 C1 T1 M1 . 23002.773648 secs N1 O1 . *. . S1 . . . . . R1 C1 T1 M1 . 23002.773680 secs N1 O1 . . . *L0 . . . . . R1 C1 T1 M1 . 23002.773717 secs *N0 O1 . . . L0 . . . . . R1 C1 T1 M1 . 23002.773709 secs *N1 O1 . . . L0 . . . . . R1 C1 T1 M1 . 23002.773747 secs Columns stand for individual CPUs, from CPU0 to CPU15, and the two-letter shortcuts stand for tasks that are running on a CPU. '*' denotes the CPU that had the event. A dot signals an idle CPU. New tasks are assigned new two-letter shortcuts - when they occur first they are printed. In the above example 'T1' stood for irqbalance: T1 => irqbalance:2089 Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-16 23:40:48 +08:00
printf(" (due to lost events?)");
printf("\n");
}
}
static void __merge_work_atoms(struct rb_root_cached *root, struct work_atoms *data)
perf sched: Add option to merge like comms to lat output Sometimes when debugging large multi-threaded applications it is helpful to collate all of the latency numbers into one bulk record to get an idea of what is going on. This patch does this by merging any entries that belong to the same comm into one entry and then spits out those totals. I've also slightly changed the output so you can see how many threads were merged in the processing. Here is the new default output format ----------------------------------------------------------------------------------------------------------- Task | Runtime ms | Switches | Average delay ms | Maximum delay ms | Maximum delay at | ----------------------------------------------------------------------------------------------------------- chrome:(23) | 740.878 ms | 2612 | avg: 0.022 ms | max: 0.845 ms | max at: 7935.254223 s pulseaudio:1523 | 94.440 ms | 597 | avg: 0.027 ms | max: 0.110 ms | max at: 7934.668372 s threaded-ml:6042 | 72.554 ms | 386 | avg: 0.035 ms | max: 1.186 ms | max at: 7935.330911 s Chrome_IOThread:3832 | 52.388 ms | 456 | avg: 0.021 ms | max: 1.365 ms | max at: 7935.330602 s Chrome_ChildIOT:(7) | 50.694 ms | 743 | avg: 0.021 ms | max: 1.448 ms | max at: 7935.256659 s Compositor:5510 | 30.012 ms | 192 | avg: 0.019 ms | max: 0.131 ms | max at: 7936.636815 s plugin_audio_th:6043 | 24.828 ms | 314 | avg: 0.018 ms | max: 0.143 ms | max at: 7936.205994 s CompositorTileW:(2) | 14.099 ms | 45 | avg: 0.022 ms | max: 0.153 ms | max at: 7937.521800 s the (#) after the task is the number of tasks merged, and then if there were no tasks merged it just shows the pid. Here is the same trace file with the -p option to print the per-pid latency numbers ----------------------------------------------------------------------------------------------------------- Task | Runtime ms | Switches | Average delay ms | Maximum delay ms | Maximum delay at | ----------------------------------------------------------------------------------------------------------- chrome:5500 | 386.872 ms | 387 | avg: 0.023 ms | max: 0.241 ms | max at: 7936.001694 s pulseaudio:1523 | 94.440 ms | 597 | avg: 0.027 ms | max: 0.110 ms | max at: 7934.668372 s threaded-ml:6042 | 72.554 ms | 386 | avg: 0.035 ms | max: 1.186 ms | max at: 7935.330911 s chrome:10226 | 69.710 ms | 251 | avg: 0.023 ms | max: 0.764 ms | max at: 7935.992305 s chrome:4267 | 64.551 ms | 418 | avg: 0.021 ms | max: 0.294 ms | max at: 7937.862427 s chrome:4827 | 62.268 ms | 54 | avg: 0.029 ms | max: 0.666 ms | max at: 7935.992813 s Chrome_IOThread:3832 | 52.388 ms | 456 | avg: 0.021 ms | max: 1.365 ms | max at: 7935.330602 s chrome:3776 | 46.150 ms | 349 | avg: 0.023 ms | max: 0.845 ms | max at: 7935.254223 s Signed-off-by: Josef Bacik <jbacik@fb.com> Acked-by: Ingo Molnar <mingo@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: kernel-team@fb.com Link: http://lkml.kernel.org/r/1432300720-30478-1-git-send-email-jbacik@fb.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-05-22 21:18:40 +08:00
{
struct rb_node **new = &(root->rb_root.rb_node), *parent = NULL;
perf sched: Add option to merge like comms to lat output Sometimes when debugging large multi-threaded applications it is helpful to collate all of the latency numbers into one bulk record to get an idea of what is going on. This patch does this by merging any entries that belong to the same comm into one entry and then spits out those totals. I've also slightly changed the output so you can see how many threads were merged in the processing. Here is the new default output format ----------------------------------------------------------------------------------------------------------- Task | Runtime ms | Switches | Average delay ms | Maximum delay ms | Maximum delay at | ----------------------------------------------------------------------------------------------------------- chrome:(23) | 740.878 ms | 2612 | avg: 0.022 ms | max: 0.845 ms | max at: 7935.254223 s pulseaudio:1523 | 94.440 ms | 597 | avg: 0.027 ms | max: 0.110 ms | max at: 7934.668372 s threaded-ml:6042 | 72.554 ms | 386 | avg: 0.035 ms | max: 1.186 ms | max at: 7935.330911 s Chrome_IOThread:3832 | 52.388 ms | 456 | avg: 0.021 ms | max: 1.365 ms | max at: 7935.330602 s Chrome_ChildIOT:(7) | 50.694 ms | 743 | avg: 0.021 ms | max: 1.448 ms | max at: 7935.256659 s Compositor:5510 | 30.012 ms | 192 | avg: 0.019 ms | max: 0.131 ms | max at: 7936.636815 s plugin_audio_th:6043 | 24.828 ms | 314 | avg: 0.018 ms | max: 0.143 ms | max at: 7936.205994 s CompositorTileW:(2) | 14.099 ms | 45 | avg: 0.022 ms | max: 0.153 ms | max at: 7937.521800 s the (#) after the task is the number of tasks merged, and then if there were no tasks merged it just shows the pid. Here is the same trace file with the -p option to print the per-pid latency numbers ----------------------------------------------------------------------------------------------------------- Task | Runtime ms | Switches | Average delay ms | Maximum delay ms | Maximum delay at | ----------------------------------------------------------------------------------------------------------- chrome:5500 | 386.872 ms | 387 | avg: 0.023 ms | max: 0.241 ms | max at: 7936.001694 s pulseaudio:1523 | 94.440 ms | 597 | avg: 0.027 ms | max: 0.110 ms | max at: 7934.668372 s threaded-ml:6042 | 72.554 ms | 386 | avg: 0.035 ms | max: 1.186 ms | max at: 7935.330911 s chrome:10226 | 69.710 ms | 251 | avg: 0.023 ms | max: 0.764 ms | max at: 7935.992305 s chrome:4267 | 64.551 ms | 418 | avg: 0.021 ms | max: 0.294 ms | max at: 7937.862427 s chrome:4827 | 62.268 ms | 54 | avg: 0.029 ms | max: 0.666 ms | max at: 7935.992813 s Chrome_IOThread:3832 | 52.388 ms | 456 | avg: 0.021 ms | max: 1.365 ms | max at: 7935.330602 s chrome:3776 | 46.150 ms | 349 | avg: 0.023 ms | max: 0.845 ms | max at: 7935.254223 s Signed-off-by: Josef Bacik <jbacik@fb.com> Acked-by: Ingo Molnar <mingo@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: kernel-team@fb.com Link: http://lkml.kernel.org/r/1432300720-30478-1-git-send-email-jbacik@fb.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-05-22 21:18:40 +08:00
struct work_atoms *this;
const char *comm = thread__comm_str(data->thread), *this_comm;
bool leftmost = true;
perf sched: Add option to merge like comms to lat output Sometimes when debugging large multi-threaded applications it is helpful to collate all of the latency numbers into one bulk record to get an idea of what is going on. This patch does this by merging any entries that belong to the same comm into one entry and then spits out those totals. I've also slightly changed the output so you can see how many threads were merged in the processing. Here is the new default output format ----------------------------------------------------------------------------------------------------------- Task | Runtime ms | Switches | Average delay ms | Maximum delay ms | Maximum delay at | ----------------------------------------------------------------------------------------------------------- chrome:(23) | 740.878 ms | 2612 | avg: 0.022 ms | max: 0.845 ms | max at: 7935.254223 s pulseaudio:1523 | 94.440 ms | 597 | avg: 0.027 ms | max: 0.110 ms | max at: 7934.668372 s threaded-ml:6042 | 72.554 ms | 386 | avg: 0.035 ms | max: 1.186 ms | max at: 7935.330911 s Chrome_IOThread:3832 | 52.388 ms | 456 | avg: 0.021 ms | max: 1.365 ms | max at: 7935.330602 s Chrome_ChildIOT:(7) | 50.694 ms | 743 | avg: 0.021 ms | max: 1.448 ms | max at: 7935.256659 s Compositor:5510 | 30.012 ms | 192 | avg: 0.019 ms | max: 0.131 ms | max at: 7936.636815 s plugin_audio_th:6043 | 24.828 ms | 314 | avg: 0.018 ms | max: 0.143 ms | max at: 7936.205994 s CompositorTileW:(2) | 14.099 ms | 45 | avg: 0.022 ms | max: 0.153 ms | max at: 7937.521800 s the (#) after the task is the number of tasks merged, and then if there were no tasks merged it just shows the pid. Here is the same trace file with the -p option to print the per-pid latency numbers ----------------------------------------------------------------------------------------------------------- Task | Runtime ms | Switches | Average delay ms | Maximum delay ms | Maximum delay at | ----------------------------------------------------------------------------------------------------------- chrome:5500 | 386.872 ms | 387 | avg: 0.023 ms | max: 0.241 ms | max at: 7936.001694 s pulseaudio:1523 | 94.440 ms | 597 | avg: 0.027 ms | max: 0.110 ms | max at: 7934.668372 s threaded-ml:6042 | 72.554 ms | 386 | avg: 0.035 ms | max: 1.186 ms | max at: 7935.330911 s chrome:10226 | 69.710 ms | 251 | avg: 0.023 ms | max: 0.764 ms | max at: 7935.992305 s chrome:4267 | 64.551 ms | 418 | avg: 0.021 ms | max: 0.294 ms | max at: 7937.862427 s chrome:4827 | 62.268 ms | 54 | avg: 0.029 ms | max: 0.666 ms | max at: 7935.992813 s Chrome_IOThread:3832 | 52.388 ms | 456 | avg: 0.021 ms | max: 1.365 ms | max at: 7935.330602 s chrome:3776 | 46.150 ms | 349 | avg: 0.023 ms | max: 0.845 ms | max at: 7935.254223 s Signed-off-by: Josef Bacik <jbacik@fb.com> Acked-by: Ingo Molnar <mingo@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: kernel-team@fb.com Link: http://lkml.kernel.org/r/1432300720-30478-1-git-send-email-jbacik@fb.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-05-22 21:18:40 +08:00
while (*new) {
int cmp;
this = container_of(*new, struct work_atoms, node);
parent = *new;
this_comm = thread__comm_str(this->thread);
cmp = strcmp(comm, this_comm);
if (cmp > 0) {
new = &((*new)->rb_left);
} else if (cmp < 0) {
new = &((*new)->rb_right);
leftmost = false;
perf sched: Add option to merge like comms to lat output Sometimes when debugging large multi-threaded applications it is helpful to collate all of the latency numbers into one bulk record to get an idea of what is going on. This patch does this by merging any entries that belong to the same comm into one entry and then spits out those totals. I've also slightly changed the output so you can see how many threads were merged in the processing. Here is the new default output format ----------------------------------------------------------------------------------------------------------- Task | Runtime ms | Switches | Average delay ms | Maximum delay ms | Maximum delay at | ----------------------------------------------------------------------------------------------------------- chrome:(23) | 740.878 ms | 2612 | avg: 0.022 ms | max: 0.845 ms | max at: 7935.254223 s pulseaudio:1523 | 94.440 ms | 597 | avg: 0.027 ms | max: 0.110 ms | max at: 7934.668372 s threaded-ml:6042 | 72.554 ms | 386 | avg: 0.035 ms | max: 1.186 ms | max at: 7935.330911 s Chrome_IOThread:3832 | 52.388 ms | 456 | avg: 0.021 ms | max: 1.365 ms | max at: 7935.330602 s Chrome_ChildIOT:(7) | 50.694 ms | 743 | avg: 0.021 ms | max: 1.448 ms | max at: 7935.256659 s Compositor:5510 | 30.012 ms | 192 | avg: 0.019 ms | max: 0.131 ms | max at: 7936.636815 s plugin_audio_th:6043 | 24.828 ms | 314 | avg: 0.018 ms | max: 0.143 ms | max at: 7936.205994 s CompositorTileW:(2) | 14.099 ms | 45 | avg: 0.022 ms | max: 0.153 ms | max at: 7937.521800 s the (#) after the task is the number of tasks merged, and then if there were no tasks merged it just shows the pid. Here is the same trace file with the -p option to print the per-pid latency numbers ----------------------------------------------------------------------------------------------------------- Task | Runtime ms | Switches | Average delay ms | Maximum delay ms | Maximum delay at | ----------------------------------------------------------------------------------------------------------- chrome:5500 | 386.872 ms | 387 | avg: 0.023 ms | max: 0.241 ms | max at: 7936.001694 s pulseaudio:1523 | 94.440 ms | 597 | avg: 0.027 ms | max: 0.110 ms | max at: 7934.668372 s threaded-ml:6042 | 72.554 ms | 386 | avg: 0.035 ms | max: 1.186 ms | max at: 7935.330911 s chrome:10226 | 69.710 ms | 251 | avg: 0.023 ms | max: 0.764 ms | max at: 7935.992305 s chrome:4267 | 64.551 ms | 418 | avg: 0.021 ms | max: 0.294 ms | max at: 7937.862427 s chrome:4827 | 62.268 ms | 54 | avg: 0.029 ms | max: 0.666 ms | max at: 7935.992813 s Chrome_IOThread:3832 | 52.388 ms | 456 | avg: 0.021 ms | max: 1.365 ms | max at: 7935.330602 s chrome:3776 | 46.150 ms | 349 | avg: 0.023 ms | max: 0.845 ms | max at: 7935.254223 s Signed-off-by: Josef Bacik <jbacik@fb.com> Acked-by: Ingo Molnar <mingo@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: kernel-team@fb.com Link: http://lkml.kernel.org/r/1432300720-30478-1-git-send-email-jbacik@fb.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-05-22 21:18:40 +08:00
} else {
this->num_merged++;
this->total_runtime += data->total_runtime;
this->nb_atoms += data->nb_atoms;
this->total_lat += data->total_lat;
list_splice(&data->work_list, &this->work_list);
if (this->max_lat < data->max_lat) {
this->max_lat = data->max_lat;
this->max_lat_at = data->max_lat_at;
}
zfree(&data);
return;
}
}
data->num_merged++;
rb_link_node(&data->node, parent, new);
rb_insert_color_cached(&data->node, root, leftmost);
perf sched: Add option to merge like comms to lat output Sometimes when debugging large multi-threaded applications it is helpful to collate all of the latency numbers into one bulk record to get an idea of what is going on. This patch does this by merging any entries that belong to the same comm into one entry and then spits out those totals. I've also slightly changed the output so you can see how many threads were merged in the processing. Here is the new default output format ----------------------------------------------------------------------------------------------------------- Task | Runtime ms | Switches | Average delay ms | Maximum delay ms | Maximum delay at | ----------------------------------------------------------------------------------------------------------- chrome:(23) | 740.878 ms | 2612 | avg: 0.022 ms | max: 0.845 ms | max at: 7935.254223 s pulseaudio:1523 | 94.440 ms | 597 | avg: 0.027 ms | max: 0.110 ms | max at: 7934.668372 s threaded-ml:6042 | 72.554 ms | 386 | avg: 0.035 ms | max: 1.186 ms | max at: 7935.330911 s Chrome_IOThread:3832 | 52.388 ms | 456 | avg: 0.021 ms | max: 1.365 ms | max at: 7935.330602 s Chrome_ChildIOT:(7) | 50.694 ms | 743 | avg: 0.021 ms | max: 1.448 ms | max at: 7935.256659 s Compositor:5510 | 30.012 ms | 192 | avg: 0.019 ms | max: 0.131 ms | max at: 7936.636815 s plugin_audio_th:6043 | 24.828 ms | 314 | avg: 0.018 ms | max: 0.143 ms | max at: 7936.205994 s CompositorTileW:(2) | 14.099 ms | 45 | avg: 0.022 ms | max: 0.153 ms | max at: 7937.521800 s the (#) after the task is the number of tasks merged, and then if there were no tasks merged it just shows the pid. Here is the same trace file with the -p option to print the per-pid latency numbers ----------------------------------------------------------------------------------------------------------- Task | Runtime ms | Switches | Average delay ms | Maximum delay ms | Maximum delay at | ----------------------------------------------------------------------------------------------------------- chrome:5500 | 386.872 ms | 387 | avg: 0.023 ms | max: 0.241 ms | max at: 7936.001694 s pulseaudio:1523 | 94.440 ms | 597 | avg: 0.027 ms | max: 0.110 ms | max at: 7934.668372 s threaded-ml:6042 | 72.554 ms | 386 | avg: 0.035 ms | max: 1.186 ms | max at: 7935.330911 s chrome:10226 | 69.710 ms | 251 | avg: 0.023 ms | max: 0.764 ms | max at: 7935.992305 s chrome:4267 | 64.551 ms | 418 | avg: 0.021 ms | max: 0.294 ms | max at: 7937.862427 s chrome:4827 | 62.268 ms | 54 | avg: 0.029 ms | max: 0.666 ms | max at: 7935.992813 s Chrome_IOThread:3832 | 52.388 ms | 456 | avg: 0.021 ms | max: 1.365 ms | max at: 7935.330602 s chrome:3776 | 46.150 ms | 349 | avg: 0.023 ms | max: 0.845 ms | max at: 7935.254223 s Signed-off-by: Josef Bacik <jbacik@fb.com> Acked-by: Ingo Molnar <mingo@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: kernel-team@fb.com Link: http://lkml.kernel.org/r/1432300720-30478-1-git-send-email-jbacik@fb.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-05-22 21:18:40 +08:00
}
static void perf_sched__merge_lat(struct perf_sched *sched)
{
struct work_atoms *data;
struct rb_node *node;
if (sched->skip_merge)
return;
while ((node = rb_first_cached(&sched->atom_root))) {
rb_erase_cached(node, &sched->atom_root);
perf sched: Add option to merge like comms to lat output Sometimes when debugging large multi-threaded applications it is helpful to collate all of the latency numbers into one bulk record to get an idea of what is going on. This patch does this by merging any entries that belong to the same comm into one entry and then spits out those totals. I've also slightly changed the output so you can see how many threads were merged in the processing. Here is the new default output format ----------------------------------------------------------------------------------------------------------- Task | Runtime ms | Switches | Average delay ms | Maximum delay ms | Maximum delay at | ----------------------------------------------------------------------------------------------------------- chrome:(23) | 740.878 ms | 2612 | avg: 0.022 ms | max: 0.845 ms | max at: 7935.254223 s pulseaudio:1523 | 94.440 ms | 597 | avg: 0.027 ms | max: 0.110 ms | max at: 7934.668372 s threaded-ml:6042 | 72.554 ms | 386 | avg: 0.035 ms | max: 1.186 ms | max at: 7935.330911 s Chrome_IOThread:3832 | 52.388 ms | 456 | avg: 0.021 ms | max: 1.365 ms | max at: 7935.330602 s Chrome_ChildIOT:(7) | 50.694 ms | 743 | avg: 0.021 ms | max: 1.448 ms | max at: 7935.256659 s Compositor:5510 | 30.012 ms | 192 | avg: 0.019 ms | max: 0.131 ms | max at: 7936.636815 s plugin_audio_th:6043 | 24.828 ms | 314 | avg: 0.018 ms | max: 0.143 ms | max at: 7936.205994 s CompositorTileW:(2) | 14.099 ms | 45 | avg: 0.022 ms | max: 0.153 ms | max at: 7937.521800 s the (#) after the task is the number of tasks merged, and then if there were no tasks merged it just shows the pid. Here is the same trace file with the -p option to print the per-pid latency numbers ----------------------------------------------------------------------------------------------------------- Task | Runtime ms | Switches | Average delay ms | Maximum delay ms | Maximum delay at | ----------------------------------------------------------------------------------------------------------- chrome:5500 | 386.872 ms | 387 | avg: 0.023 ms | max: 0.241 ms | max at: 7936.001694 s pulseaudio:1523 | 94.440 ms | 597 | avg: 0.027 ms | max: 0.110 ms | max at: 7934.668372 s threaded-ml:6042 | 72.554 ms | 386 | avg: 0.035 ms | max: 1.186 ms | max at: 7935.330911 s chrome:10226 | 69.710 ms | 251 | avg: 0.023 ms | max: 0.764 ms | max at: 7935.992305 s chrome:4267 | 64.551 ms | 418 | avg: 0.021 ms | max: 0.294 ms | max at: 7937.862427 s chrome:4827 | 62.268 ms | 54 | avg: 0.029 ms | max: 0.666 ms | max at: 7935.992813 s Chrome_IOThread:3832 | 52.388 ms | 456 | avg: 0.021 ms | max: 1.365 ms | max at: 7935.330602 s chrome:3776 | 46.150 ms | 349 | avg: 0.023 ms | max: 0.845 ms | max at: 7935.254223 s Signed-off-by: Josef Bacik <jbacik@fb.com> Acked-by: Ingo Molnar <mingo@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: kernel-team@fb.com Link: http://lkml.kernel.org/r/1432300720-30478-1-git-send-email-jbacik@fb.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-05-22 21:18:40 +08:00
data = rb_entry(node, struct work_atoms, node);
__merge_work_atoms(&sched->merged_atom_root, data);
}
}
static int perf_sched__lat(struct perf_sched *sched)
perf sched: Add 'perf sched map' scheduling event map printout This prints a textual context-switching outline of workload captured via perf sched record. For example, on a 16 CPU box it outputs: N1 O1 . . . S1 . . . B0 . *I0 C1 . M1 . 23002.773423 secs N1 O1 . *Q0 . S1 . . . B0 . I0 C1 . M1 . 23002.773423 secs N1 O1 . Q0 . S1 . . . B0 . *R1 C1 . M1 . 23002.773485 secs N1 O1 . Q0 . S1 . *S0 . B0 . R1 C1 . M1 . 23002.773478 secs *L0 O1 . Q0 . S1 . S0 . B0 . R1 C1 . M1 . 23002.773523 secs L0 O1 . *. . S1 . S0 . B0 . R1 C1 . M1 . 23002.773531 secs L0 O1 . . . S1 . S0 . B0 . R1 C1 *T1 M1 . 23002.773547 secs T1 => irqbalance:2089 L0 O1 . . . S1 . S0 . *P0 . R1 C1 T1 M1 . 23002.773549 secs *N1 O1 . . . S1 . S0 . P0 . R1 C1 T1 M1 . 23002.773566 secs N1 O1 . . . *J0 . S0 . P0 . R1 C1 T1 M1 . 23002.773571 secs N1 O1 . . . J0 . S0 *B0 P0 . R1 C1 T1 M1 . 23002.773592 secs N1 O1 . . . J0 . *U0 B0 P0 . R1 C1 T1 M1 . 23002.773582 secs N1 O1 . . . *S1 . U0 B0 P0 . R1 C1 T1 M1 . 23002.773604 secs N1 O1 . . . S1 . U0 B0 *. . R1 C1 T1 M1 . 23002.773615 secs N1 O1 . . . S1 . U0 B0 . . *K0 C1 T1 M1 . 23002.773631 secs N1 O1 . *M0 . S1 . U0 B0 . . K0 C1 T1 M1 . 23002.773624 secs N1 O1 . M0 . S1 . U0 *. . . K0 C1 T1 M1 . 23002.773644 secs N1 O1 . M0 . S1 . U0 . . . *R1 C1 T1 M1 . 23002.773662 secs N1 O1 . M0 . S1 . *. . . . R1 C1 T1 M1 . 23002.773648 secs N1 O1 . *. . S1 . . . . . R1 C1 T1 M1 . 23002.773680 secs N1 O1 . . . *L0 . . . . . R1 C1 T1 M1 . 23002.773717 secs *N0 O1 . . . L0 . . . . . R1 C1 T1 M1 . 23002.773709 secs *N1 O1 . . . L0 . . . . . R1 C1 T1 M1 . 23002.773747 secs Columns stand for individual CPUs, from CPU0 to CPU15, and the two-letter shortcuts stand for tasks that are running on a CPU. '*' denotes the CPU that had the event. A dot signals an idle CPU. New tasks are assigned new two-letter shortcuts - when they occur first they are printed. In the above example 'T1' stood for irqbalance: T1 => irqbalance:2089 Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-16 23:40:48 +08:00
{
struct rb_node *next;
setup_pager();
if (perf_sched__read_events(sched))
return -1;
perf sched: Add option to merge like comms to lat output Sometimes when debugging large multi-threaded applications it is helpful to collate all of the latency numbers into one bulk record to get an idea of what is going on. This patch does this by merging any entries that belong to the same comm into one entry and then spits out those totals. I've also slightly changed the output so you can see how many threads were merged in the processing. Here is the new default output format ----------------------------------------------------------------------------------------------------------- Task | Runtime ms | Switches | Average delay ms | Maximum delay ms | Maximum delay at | ----------------------------------------------------------------------------------------------------------- chrome:(23) | 740.878 ms | 2612 | avg: 0.022 ms | max: 0.845 ms | max at: 7935.254223 s pulseaudio:1523 | 94.440 ms | 597 | avg: 0.027 ms | max: 0.110 ms | max at: 7934.668372 s threaded-ml:6042 | 72.554 ms | 386 | avg: 0.035 ms | max: 1.186 ms | max at: 7935.330911 s Chrome_IOThread:3832 | 52.388 ms | 456 | avg: 0.021 ms | max: 1.365 ms | max at: 7935.330602 s Chrome_ChildIOT:(7) | 50.694 ms | 743 | avg: 0.021 ms | max: 1.448 ms | max at: 7935.256659 s Compositor:5510 | 30.012 ms | 192 | avg: 0.019 ms | max: 0.131 ms | max at: 7936.636815 s plugin_audio_th:6043 | 24.828 ms | 314 | avg: 0.018 ms | max: 0.143 ms | max at: 7936.205994 s CompositorTileW:(2) | 14.099 ms | 45 | avg: 0.022 ms | max: 0.153 ms | max at: 7937.521800 s the (#) after the task is the number of tasks merged, and then if there were no tasks merged it just shows the pid. Here is the same trace file with the -p option to print the per-pid latency numbers ----------------------------------------------------------------------------------------------------------- Task | Runtime ms | Switches | Average delay ms | Maximum delay ms | Maximum delay at | ----------------------------------------------------------------------------------------------------------- chrome:5500 | 386.872 ms | 387 | avg: 0.023 ms | max: 0.241 ms | max at: 7936.001694 s pulseaudio:1523 | 94.440 ms | 597 | avg: 0.027 ms | max: 0.110 ms | max at: 7934.668372 s threaded-ml:6042 | 72.554 ms | 386 | avg: 0.035 ms | max: 1.186 ms | max at: 7935.330911 s chrome:10226 | 69.710 ms | 251 | avg: 0.023 ms | max: 0.764 ms | max at: 7935.992305 s chrome:4267 | 64.551 ms | 418 | avg: 0.021 ms | max: 0.294 ms | max at: 7937.862427 s chrome:4827 | 62.268 ms | 54 | avg: 0.029 ms | max: 0.666 ms | max at: 7935.992813 s Chrome_IOThread:3832 | 52.388 ms | 456 | avg: 0.021 ms | max: 1.365 ms | max at: 7935.330602 s chrome:3776 | 46.150 ms | 349 | avg: 0.023 ms | max: 0.845 ms | max at: 7935.254223 s Signed-off-by: Josef Bacik <jbacik@fb.com> Acked-by: Ingo Molnar <mingo@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: kernel-team@fb.com Link: http://lkml.kernel.org/r/1432300720-30478-1-git-send-email-jbacik@fb.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-05-22 21:18:40 +08:00
perf_sched__merge_lat(sched);
perf_sched__sort_lat(sched);
perf sched: Add 'perf sched map' scheduling event map printout This prints a textual context-switching outline of workload captured via perf sched record. For example, on a 16 CPU box it outputs: N1 O1 . . . S1 . . . B0 . *I0 C1 . M1 . 23002.773423 secs N1 O1 . *Q0 . S1 . . . B0 . I0 C1 . M1 . 23002.773423 secs N1 O1 . Q0 . S1 . . . B0 . *R1 C1 . M1 . 23002.773485 secs N1 O1 . Q0 . S1 . *S0 . B0 . R1 C1 . M1 . 23002.773478 secs *L0 O1 . Q0 . S1 . S0 . B0 . R1 C1 . M1 . 23002.773523 secs L0 O1 . *. . S1 . S0 . B0 . R1 C1 . M1 . 23002.773531 secs L0 O1 . . . S1 . S0 . B0 . R1 C1 *T1 M1 . 23002.773547 secs T1 => irqbalance:2089 L0 O1 . . . S1 . S0 . *P0 . R1 C1 T1 M1 . 23002.773549 secs *N1 O1 . . . S1 . S0 . P0 . R1 C1 T1 M1 . 23002.773566 secs N1 O1 . . . *J0 . S0 . P0 . R1 C1 T1 M1 . 23002.773571 secs N1 O1 . . . J0 . S0 *B0 P0 . R1 C1 T1 M1 . 23002.773592 secs N1 O1 . . . J0 . *U0 B0 P0 . R1 C1 T1 M1 . 23002.773582 secs N1 O1 . . . *S1 . U0 B0 P0 . R1 C1 T1 M1 . 23002.773604 secs N1 O1 . . . S1 . U0 B0 *. . R1 C1 T1 M1 . 23002.773615 secs N1 O1 . . . S1 . U0 B0 . . *K0 C1 T1 M1 . 23002.773631 secs N1 O1 . *M0 . S1 . U0 B0 . . K0 C1 T1 M1 . 23002.773624 secs N1 O1 . M0 . S1 . U0 *. . . K0 C1 T1 M1 . 23002.773644 secs N1 O1 . M0 . S1 . U0 . . . *R1 C1 T1 M1 . 23002.773662 secs N1 O1 . M0 . S1 . *. . . . R1 C1 T1 M1 . 23002.773648 secs N1 O1 . *. . S1 . . . . . R1 C1 T1 M1 . 23002.773680 secs N1 O1 . . . *L0 . . . . . R1 C1 T1 M1 . 23002.773717 secs *N0 O1 . . . L0 . . . . . R1 C1 T1 M1 . 23002.773709 secs *N1 O1 . . . L0 . . . . . R1 C1 T1 M1 . 23002.773747 secs Columns stand for individual CPUs, from CPU0 to CPU15, and the two-letter shortcuts stand for tasks that are running on a CPU. '*' denotes the CPU that had the event. A dot signals an idle CPU. New tasks are assigned new two-letter shortcuts - when they occur first they are printed. In the above example 'T1' stood for irqbalance: T1 => irqbalance:2089 Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-16 23:40:48 +08:00
perf sched: Fixup header alignment in 'latency' output Before: --------------------------------------------------------------------------------------------------------------- Task | Runtime ms | Switches | Average delay ms | Maximum delay ms | Maximum delay at | --------------------------------------------------------------------------------------------------------------- ... | | | | | git:24540 | 336.622 ms | 10 | avg: 0.032 ms | max: 0.062 ms | max at: 115610.111046 s git:24541 | 0.457 ms | 1 | avg: 0.000 ms | max: 0.000 ms | max at: 0.000000 s ----------------------------------------------------------------------------------------- TOTAL: | 396.542 ms | 353 | --------------------------------------------------- After: ----------------------------------------------------------------------------------------------------------------- Task | Runtime ms | Switches | Average delay ms | Maximum delay ms | Maximum delay at | ----------------------------------------------------------------------------------------------------------------- ... | | | | | git:24540 | 336.622 ms | 10 | avg: 0.032 ms | max: 0.062 ms | max at: 115610.111046 s git:24541 | 0.457 ms | 1 | avg: 0.000 ms | max: 0.000 ms | max at: 0.000000 s ----------------------------------------------------------------------------------------------------------------- TOTAL: | 396.542 ms | 353 | --------------------------------------------------- Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Link: http://lkml.kernel.org/r/1395065901-25740-1-git-send-email-artagnon@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2014-03-17 22:18:21 +08:00
printf("\n -----------------------------------------------------------------------------------------------------------------\n");
printf(" Task | Runtime ms | Switches | Average delay ms | Maximum delay ms | Maximum delay at |\n");
printf(" -----------------------------------------------------------------------------------------------------------------\n");
perf sched: Add 'perf sched map' scheduling event map printout This prints a textual context-switching outline of workload captured via perf sched record. For example, on a 16 CPU box it outputs: N1 O1 . . . S1 . . . B0 . *I0 C1 . M1 . 23002.773423 secs N1 O1 . *Q0 . S1 . . . B0 . I0 C1 . M1 . 23002.773423 secs N1 O1 . Q0 . S1 . . . B0 . *R1 C1 . M1 . 23002.773485 secs N1 O1 . Q0 . S1 . *S0 . B0 . R1 C1 . M1 . 23002.773478 secs *L0 O1 . Q0 . S1 . S0 . B0 . R1 C1 . M1 . 23002.773523 secs L0 O1 . *. . S1 . S0 . B0 . R1 C1 . M1 . 23002.773531 secs L0 O1 . . . S1 . S0 . B0 . R1 C1 *T1 M1 . 23002.773547 secs T1 => irqbalance:2089 L0 O1 . . . S1 . S0 . *P0 . R1 C1 T1 M1 . 23002.773549 secs *N1 O1 . . . S1 . S0 . P0 . R1 C1 T1 M1 . 23002.773566 secs N1 O1 . . . *J0 . S0 . P0 . R1 C1 T1 M1 . 23002.773571 secs N1 O1 . . . J0 . S0 *B0 P0 . R1 C1 T1 M1 . 23002.773592 secs N1 O1 . . . J0 . *U0 B0 P0 . R1 C1 T1 M1 . 23002.773582 secs N1 O1 . . . *S1 . U0 B0 P0 . R1 C1 T1 M1 . 23002.773604 secs N1 O1 . . . S1 . U0 B0 *. . R1 C1 T1 M1 . 23002.773615 secs N1 O1 . . . S1 . U0 B0 . . *K0 C1 T1 M1 . 23002.773631 secs N1 O1 . *M0 . S1 . U0 B0 . . K0 C1 T1 M1 . 23002.773624 secs N1 O1 . M0 . S1 . U0 *. . . K0 C1 T1 M1 . 23002.773644 secs N1 O1 . M0 . S1 . U0 . . . *R1 C1 T1 M1 . 23002.773662 secs N1 O1 . M0 . S1 . *. . . . R1 C1 T1 M1 . 23002.773648 secs N1 O1 . *. . S1 . . . . . R1 C1 T1 M1 . 23002.773680 secs N1 O1 . . . *L0 . . . . . R1 C1 T1 M1 . 23002.773717 secs *N0 O1 . . . L0 . . . . . R1 C1 T1 M1 . 23002.773709 secs *N1 O1 . . . L0 . . . . . R1 C1 T1 M1 . 23002.773747 secs Columns stand for individual CPUs, from CPU0 to CPU15, and the two-letter shortcuts stand for tasks that are running on a CPU. '*' denotes the CPU that had the event. A dot signals an idle CPU. New tasks are assigned new two-letter shortcuts - when they occur first they are printed. In the above example 'T1' stood for irqbalance: T1 => irqbalance:2089 Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-16 23:40:48 +08:00
next = rb_first_cached(&sched->sorted_atom_root);
perf sched: Add 'perf sched map' scheduling event map printout This prints a textual context-switching outline of workload captured via perf sched record. For example, on a 16 CPU box it outputs: N1 O1 . . . S1 . . . B0 . *I0 C1 . M1 . 23002.773423 secs N1 O1 . *Q0 . S1 . . . B0 . I0 C1 . M1 . 23002.773423 secs N1 O1 . Q0 . S1 . . . B0 . *R1 C1 . M1 . 23002.773485 secs N1 O1 . Q0 . S1 . *S0 . B0 . R1 C1 . M1 . 23002.773478 secs *L0 O1 . Q0 . S1 . S0 . B0 . R1 C1 . M1 . 23002.773523 secs L0 O1 . *. . S1 . S0 . B0 . R1 C1 . M1 . 23002.773531 secs L0 O1 . . . S1 . S0 . B0 . R1 C1 *T1 M1 . 23002.773547 secs T1 => irqbalance:2089 L0 O1 . . . S1 . S0 . *P0 . R1 C1 T1 M1 . 23002.773549 secs *N1 O1 . . . S1 . S0 . P0 . R1 C1 T1 M1 . 23002.773566 secs N1 O1 . . . *J0 . S0 . P0 . R1 C1 T1 M1 . 23002.773571 secs N1 O1 . . . J0 . S0 *B0 P0 . R1 C1 T1 M1 . 23002.773592 secs N1 O1 . . . J0 . *U0 B0 P0 . R1 C1 T1 M1 . 23002.773582 secs N1 O1 . . . *S1 . U0 B0 P0 . R1 C1 T1 M1 . 23002.773604 secs N1 O1 . . . S1 . U0 B0 *. . R1 C1 T1 M1 . 23002.773615 secs N1 O1 . . . S1 . U0 B0 . . *K0 C1 T1 M1 . 23002.773631 secs N1 O1 . *M0 . S1 . U0 B0 . . K0 C1 T1 M1 . 23002.773624 secs N1 O1 . M0 . S1 . U0 *. . . K0 C1 T1 M1 . 23002.773644 secs N1 O1 . M0 . S1 . U0 . . . *R1 C1 T1 M1 . 23002.773662 secs N1 O1 . M0 . S1 . *. . . . R1 C1 T1 M1 . 23002.773648 secs N1 O1 . *. . S1 . . . . . R1 C1 T1 M1 . 23002.773680 secs N1 O1 . . . *L0 . . . . . R1 C1 T1 M1 . 23002.773717 secs *N0 O1 . . . L0 . . . . . R1 C1 T1 M1 . 23002.773709 secs *N1 O1 . . . L0 . . . . . R1 C1 T1 M1 . 23002.773747 secs Columns stand for individual CPUs, from CPU0 to CPU15, and the two-letter shortcuts stand for tasks that are running on a CPU. '*' denotes the CPU that had the event. A dot signals an idle CPU. New tasks are assigned new two-letter shortcuts - when they occur first they are printed. In the above example 'T1' stood for irqbalance: T1 => irqbalance:2089 Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-16 23:40:48 +08:00
while (next) {
struct work_atoms *work_list;
work_list = rb_entry(next, struct work_atoms, node);
output_lat_thread(sched, work_list);
perf sched: Add 'perf sched map' scheduling event map printout This prints a textual context-switching outline of workload captured via perf sched record. For example, on a 16 CPU box it outputs: N1 O1 . . . S1 . . . B0 . *I0 C1 . M1 . 23002.773423 secs N1 O1 . *Q0 . S1 . . . B0 . I0 C1 . M1 . 23002.773423 secs N1 O1 . Q0 . S1 . . . B0 . *R1 C1 . M1 . 23002.773485 secs N1 O1 . Q0 . S1 . *S0 . B0 . R1 C1 . M1 . 23002.773478 secs *L0 O1 . Q0 . S1 . S0 . B0 . R1 C1 . M1 . 23002.773523 secs L0 O1 . *. . S1 . S0 . B0 . R1 C1 . M1 . 23002.773531 secs L0 O1 . . . S1 . S0 . B0 . R1 C1 *T1 M1 . 23002.773547 secs T1 => irqbalance:2089 L0 O1 . . . S1 . S0 . *P0 . R1 C1 T1 M1 . 23002.773549 secs *N1 O1 . . . S1 . S0 . P0 . R1 C1 T1 M1 . 23002.773566 secs N1 O1 . . . *J0 . S0 . P0 . R1 C1 T1 M1 . 23002.773571 secs N1 O1 . . . J0 . S0 *B0 P0 . R1 C1 T1 M1 . 23002.773592 secs N1 O1 . . . J0 . *U0 B0 P0 . R1 C1 T1 M1 . 23002.773582 secs N1 O1 . . . *S1 . U0 B0 P0 . R1 C1 T1 M1 . 23002.773604 secs N1 O1 . . . S1 . U0 B0 *. . R1 C1 T1 M1 . 23002.773615 secs N1 O1 . . . S1 . U0 B0 . . *K0 C1 T1 M1 . 23002.773631 secs N1 O1 . *M0 . S1 . U0 B0 . . K0 C1 T1 M1 . 23002.773624 secs N1 O1 . M0 . S1 . U0 *. . . K0 C1 T1 M1 . 23002.773644 secs N1 O1 . M0 . S1 . U0 . . . *R1 C1 T1 M1 . 23002.773662 secs N1 O1 . M0 . S1 . *. . . . R1 C1 T1 M1 . 23002.773648 secs N1 O1 . *. . S1 . . . . . R1 C1 T1 M1 . 23002.773680 secs N1 O1 . . . *L0 . . . . . R1 C1 T1 M1 . 23002.773717 secs *N0 O1 . . . L0 . . . . . R1 C1 T1 M1 . 23002.773709 secs *N1 O1 . . . L0 . . . . . R1 C1 T1 M1 . 23002.773747 secs Columns stand for individual CPUs, from CPU0 to CPU15, and the two-letter shortcuts stand for tasks that are running on a CPU. '*' denotes the CPU that had the event. A dot signals an idle CPU. New tasks are assigned new two-letter shortcuts - when they occur first they are printed. In the above example 'T1' stood for irqbalance: T1 => irqbalance:2089 Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-16 23:40:48 +08:00
next = rb_next(next);
thread__zput(work_list->thread);
perf sched: Add 'perf sched map' scheduling event map printout This prints a textual context-switching outline of workload captured via perf sched record. For example, on a 16 CPU box it outputs: N1 O1 . . . S1 . . . B0 . *I0 C1 . M1 . 23002.773423 secs N1 O1 . *Q0 . S1 . . . B0 . I0 C1 . M1 . 23002.773423 secs N1 O1 . Q0 . S1 . . . B0 . *R1 C1 . M1 . 23002.773485 secs N1 O1 . Q0 . S1 . *S0 . B0 . R1 C1 . M1 . 23002.773478 secs *L0 O1 . Q0 . S1 . S0 . B0 . R1 C1 . M1 . 23002.773523 secs L0 O1 . *. . S1 . S0 . B0 . R1 C1 . M1 . 23002.773531 secs L0 O1 . . . S1 . S0 . B0 . R1 C1 *T1 M1 . 23002.773547 secs T1 => irqbalance:2089 L0 O1 . . . S1 . S0 . *P0 . R1 C1 T1 M1 . 23002.773549 secs *N1 O1 . . . S1 . S0 . P0 . R1 C1 T1 M1 . 23002.773566 secs N1 O1 . . . *J0 . S0 . P0 . R1 C1 T1 M1 . 23002.773571 secs N1 O1 . . . J0 . S0 *B0 P0 . R1 C1 T1 M1 . 23002.773592 secs N1 O1 . . . J0 . *U0 B0 P0 . R1 C1 T1 M1 . 23002.773582 secs N1 O1 . . . *S1 . U0 B0 P0 . R1 C1 T1 M1 . 23002.773604 secs N1 O1 . . . S1 . U0 B0 *. . R1 C1 T1 M1 . 23002.773615 secs N1 O1 . . . S1 . U0 B0 . . *K0 C1 T1 M1 . 23002.773631 secs N1 O1 . *M0 . S1 . U0 B0 . . K0 C1 T1 M1 . 23002.773624 secs N1 O1 . M0 . S1 . U0 *. . . K0 C1 T1 M1 . 23002.773644 secs N1 O1 . M0 . S1 . U0 . . . *R1 C1 T1 M1 . 23002.773662 secs N1 O1 . M0 . S1 . *. . . . R1 C1 T1 M1 . 23002.773648 secs N1 O1 . *. . S1 . . . . . R1 C1 T1 M1 . 23002.773680 secs N1 O1 . . . *L0 . . . . . R1 C1 T1 M1 . 23002.773717 secs *N0 O1 . . . L0 . . . . . R1 C1 T1 M1 . 23002.773709 secs *N1 O1 . . . L0 . . . . . R1 C1 T1 M1 . 23002.773747 secs Columns stand for individual CPUs, from CPU0 to CPU15, and the two-letter shortcuts stand for tasks that are running on a CPU. '*' denotes the CPU that had the event. A dot signals an idle CPU. New tasks are assigned new two-letter shortcuts - when they occur first they are printed. In the above example 'T1' stood for irqbalance: T1 => irqbalance:2089 Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-16 23:40:48 +08:00
}
perf sched: Fixup header alignment in 'latency' output Before: --------------------------------------------------------------------------------------------------------------- Task | Runtime ms | Switches | Average delay ms | Maximum delay ms | Maximum delay at | --------------------------------------------------------------------------------------------------------------- ... | | | | | git:24540 | 336.622 ms | 10 | avg: 0.032 ms | max: 0.062 ms | max at: 115610.111046 s git:24541 | 0.457 ms | 1 | avg: 0.000 ms | max: 0.000 ms | max at: 0.000000 s ----------------------------------------------------------------------------------------- TOTAL: | 396.542 ms | 353 | --------------------------------------------------- After: ----------------------------------------------------------------------------------------------------------------- Task | Runtime ms | Switches | Average delay ms | Maximum delay ms | Maximum delay at | ----------------------------------------------------------------------------------------------------------------- ... | | | | | git:24540 | 336.622 ms | 10 | avg: 0.032 ms | max: 0.062 ms | max at: 115610.111046 s git:24541 | 0.457 ms | 1 | avg: 0.000 ms | max: 0.000 ms | max at: 0.000000 s ----------------------------------------------------------------------------------------------------------------- TOTAL: | 396.542 ms | 353 | --------------------------------------------------- Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Link: http://lkml.kernel.org/r/1395065901-25740-1-git-send-email-artagnon@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2014-03-17 22:18:21 +08:00
printf(" -----------------------------------------------------------------------------------------------------------------\n");
printf(" TOTAL: |%11.3f ms |%9" PRIu64 " |\n",
(double)sched->all_runtime / NSEC_PER_MSEC, sched->all_count);
perf sched: Add 'perf sched map' scheduling event map printout This prints a textual context-switching outline of workload captured via perf sched record. For example, on a 16 CPU box it outputs: N1 O1 . . . S1 . . . B0 . *I0 C1 . M1 . 23002.773423 secs N1 O1 . *Q0 . S1 . . . B0 . I0 C1 . M1 . 23002.773423 secs N1 O1 . Q0 . S1 . . . B0 . *R1 C1 . M1 . 23002.773485 secs N1 O1 . Q0 . S1 . *S0 . B0 . R1 C1 . M1 . 23002.773478 secs *L0 O1 . Q0 . S1 . S0 . B0 . R1 C1 . M1 . 23002.773523 secs L0 O1 . *. . S1 . S0 . B0 . R1 C1 . M1 . 23002.773531 secs L0 O1 . . . S1 . S0 . B0 . R1 C1 *T1 M1 . 23002.773547 secs T1 => irqbalance:2089 L0 O1 . . . S1 . S0 . *P0 . R1 C1 T1 M1 . 23002.773549 secs *N1 O1 . . . S1 . S0 . P0 . R1 C1 T1 M1 . 23002.773566 secs N1 O1 . . . *J0 . S0 . P0 . R1 C1 T1 M1 . 23002.773571 secs N1 O1 . . . J0 . S0 *B0 P0 . R1 C1 T1 M1 . 23002.773592 secs N1 O1 . . . J0 . *U0 B0 P0 . R1 C1 T1 M1 . 23002.773582 secs N1 O1 . . . *S1 . U0 B0 P0 . R1 C1 T1 M1 . 23002.773604 secs N1 O1 . . . S1 . U0 B0 *. . R1 C1 T1 M1 . 23002.773615 secs N1 O1 . . . S1 . U0 B0 . . *K0 C1 T1 M1 . 23002.773631 secs N1 O1 . *M0 . S1 . U0 B0 . . K0 C1 T1 M1 . 23002.773624 secs N1 O1 . M0 . S1 . U0 *. . . K0 C1 T1 M1 . 23002.773644 secs N1 O1 . M0 . S1 . U0 . . . *R1 C1 T1 M1 . 23002.773662 secs N1 O1 . M0 . S1 . *. . . . R1 C1 T1 M1 . 23002.773648 secs N1 O1 . *. . S1 . . . . . R1 C1 T1 M1 . 23002.773680 secs N1 O1 . . . *L0 . . . . . R1 C1 T1 M1 . 23002.773717 secs *N0 O1 . . . L0 . . . . . R1 C1 T1 M1 . 23002.773709 secs *N1 O1 . . . L0 . . . . . R1 C1 T1 M1 . 23002.773747 secs Columns stand for individual CPUs, from CPU0 to CPU15, and the two-letter shortcuts stand for tasks that are running on a CPU. '*' denotes the CPU that had the event. A dot signals an idle CPU. New tasks are assigned new two-letter shortcuts - when they occur first they are printed. In the above example 'T1' stood for irqbalance: T1 => irqbalance:2089 Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-16 23:40:48 +08:00
printf(" ---------------------------------------------------\n");
print_bad_events(sched);
perf sched: Add 'perf sched map' scheduling event map printout This prints a textual context-switching outline of workload captured via perf sched record. For example, on a 16 CPU box it outputs: N1 O1 . . . S1 . . . B0 . *I0 C1 . M1 . 23002.773423 secs N1 O1 . *Q0 . S1 . . . B0 . I0 C1 . M1 . 23002.773423 secs N1 O1 . Q0 . S1 . . . B0 . *R1 C1 . M1 . 23002.773485 secs N1 O1 . Q0 . S1 . *S0 . B0 . R1 C1 . M1 . 23002.773478 secs *L0 O1 . Q0 . S1 . S0 . B0 . R1 C1 . M1 . 23002.773523 secs L0 O1 . *. . S1 . S0 . B0 . R1 C1 . M1 . 23002.773531 secs L0 O1 . . . S1 . S0 . B0 . R1 C1 *T1 M1 . 23002.773547 secs T1 => irqbalance:2089 L0 O1 . . . S1 . S0 . *P0 . R1 C1 T1 M1 . 23002.773549 secs *N1 O1 . . . S1 . S0 . P0 . R1 C1 T1 M1 . 23002.773566 secs N1 O1 . . . *J0 . S0 . P0 . R1 C1 T1 M1 . 23002.773571 secs N1 O1 . . . J0 . S0 *B0 P0 . R1 C1 T1 M1 . 23002.773592 secs N1 O1 . . . J0 . *U0 B0 P0 . R1 C1 T1 M1 . 23002.773582 secs N1 O1 . . . *S1 . U0 B0 P0 . R1 C1 T1 M1 . 23002.773604 secs N1 O1 . . . S1 . U0 B0 *. . R1 C1 T1 M1 . 23002.773615 secs N1 O1 . . . S1 . U0 B0 . . *K0 C1 T1 M1 . 23002.773631 secs N1 O1 . *M0 . S1 . U0 B0 . . K0 C1 T1 M1 . 23002.773624 secs N1 O1 . M0 . S1 . U0 *. . . K0 C1 T1 M1 . 23002.773644 secs N1 O1 . M0 . S1 . U0 . . . *R1 C1 T1 M1 . 23002.773662 secs N1 O1 . M0 . S1 . *. . . . R1 C1 T1 M1 . 23002.773648 secs N1 O1 . *. . S1 . . . . . R1 C1 T1 M1 . 23002.773680 secs N1 O1 . . . *L0 . . . . . R1 C1 T1 M1 . 23002.773717 secs *N0 O1 . . . L0 . . . . . R1 C1 T1 M1 . 23002.773709 secs *N1 O1 . . . L0 . . . . . R1 C1 T1 M1 . 23002.773747 secs Columns stand for individual CPUs, from CPU0 to CPU15, and the two-letter shortcuts stand for tasks that are running on a CPU. '*' denotes the CPU that had the event. A dot signals an idle CPU. New tasks are assigned new two-letter shortcuts - when they occur first they are printed. In the above example 'T1' stood for irqbalance: T1 => irqbalance:2089 Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-16 23:40:48 +08:00
printf("\n");
return 0;
perf sched: Add 'perf sched map' scheduling event map printout This prints a textual context-switching outline of workload captured via perf sched record. For example, on a 16 CPU box it outputs: N1 O1 . . . S1 . . . B0 . *I0 C1 . M1 . 23002.773423 secs N1 O1 . *Q0 . S1 . . . B0 . I0 C1 . M1 . 23002.773423 secs N1 O1 . Q0 . S1 . . . B0 . *R1 C1 . M1 . 23002.773485 secs N1 O1 . Q0 . S1 . *S0 . B0 . R1 C1 . M1 . 23002.773478 secs *L0 O1 . Q0 . S1 . S0 . B0 . R1 C1 . M1 . 23002.773523 secs L0 O1 . *. . S1 . S0 . B0 . R1 C1 . M1 . 23002.773531 secs L0 O1 . . . S1 . S0 . B0 . R1 C1 *T1 M1 . 23002.773547 secs T1 => irqbalance:2089 L0 O1 . . . S1 . S0 . *P0 . R1 C1 T1 M1 . 23002.773549 secs *N1 O1 . . . S1 . S0 . P0 . R1 C1 T1 M1 . 23002.773566 secs N1 O1 . . . *J0 . S0 . P0 . R1 C1 T1 M1 . 23002.773571 secs N1 O1 . . . J0 . S0 *B0 P0 . R1 C1 T1 M1 . 23002.773592 secs N1 O1 . . . J0 . *U0 B0 P0 . R1 C1 T1 M1 . 23002.773582 secs N1 O1 . . . *S1 . U0 B0 P0 . R1 C1 T1 M1 . 23002.773604 secs N1 O1 . . . S1 . U0 B0 *. . R1 C1 T1 M1 . 23002.773615 secs N1 O1 . . . S1 . U0 B0 . . *K0 C1 T1 M1 . 23002.773631 secs N1 O1 . *M0 . S1 . U0 B0 . . K0 C1 T1 M1 . 23002.773624 secs N1 O1 . M0 . S1 . U0 *. . . K0 C1 T1 M1 . 23002.773644 secs N1 O1 . M0 . S1 . U0 . . . *R1 C1 T1 M1 . 23002.773662 secs N1 O1 . M0 . S1 . *. . . . R1 C1 T1 M1 . 23002.773648 secs N1 O1 . *. . S1 . . . . . R1 C1 T1 M1 . 23002.773680 secs N1 O1 . . . *L0 . . . . . R1 C1 T1 M1 . 23002.773717 secs *N0 O1 . . . L0 . . . . . R1 C1 T1 M1 . 23002.773709 secs *N1 O1 . . . L0 . . . . . R1 C1 T1 M1 . 23002.773747 secs Columns stand for individual CPUs, from CPU0 to CPU15, and the two-letter shortcuts stand for tasks that are running on a CPU. '*' denotes the CPU that had the event. A dot signals an idle CPU. New tasks are assigned new two-letter shortcuts - when they occur first they are printed. In the above example 'T1' stood for irqbalance: T1 => irqbalance:2089 Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-16 23:40:48 +08:00
}
static int setup_map_cpus(struct perf_sched *sched)
{
struct perf_cpu_map *map;
sched->max_cpu = sysconf(_SC_NPROCESSORS_CONF);
if (sched->map.comp) {
sched->map.comp_cpus = zalloc(sched->max_cpu * sizeof(int));
if (!sched->map.comp_cpus)
return -1;
}
if (!sched->map.cpus_str)
return 0;
map = perf_cpu_map__new(sched->map.cpus_str);
if (!map) {
pr_err("failed to get cpus map from %s\n", sched->map.cpus_str);
return -1;
}
sched->map.cpus = map;
return 0;
}
static int setup_color_pids(struct perf_sched *sched)
{
struct perf_thread_map *map;
if (!sched->map.color_pids_str)
return 0;
map = thread_map__new_by_tid_str(sched->map.color_pids_str);
if (!map) {
pr_err("failed to get thread map from %s\n", sched->map.color_pids_str);
return -1;
}
sched->map.color_pids = map;
return 0;
}
static int setup_color_cpus(struct perf_sched *sched)
{
struct perf_cpu_map *map;
if (!sched->map.color_cpus_str)
return 0;
map = perf_cpu_map__new(sched->map.color_cpus_str);
if (!map) {
pr_err("failed to get thread map from %s\n", sched->map.color_cpus_str);
return -1;
}
sched->map.color_cpus = map;
return 0;
}
static int perf_sched__map(struct perf_sched *sched)
perf sched: Add 'perf sched map' scheduling event map printout This prints a textual context-switching outline of workload captured via perf sched record. For example, on a 16 CPU box it outputs: N1 O1 . . . S1 . . . B0 . *I0 C1 . M1 . 23002.773423 secs N1 O1 . *Q0 . S1 . . . B0 . I0 C1 . M1 . 23002.773423 secs N1 O1 . Q0 . S1 . . . B0 . *R1 C1 . M1 . 23002.773485 secs N1 O1 . Q0 . S1 . *S0 . B0 . R1 C1 . M1 . 23002.773478 secs *L0 O1 . Q0 . S1 . S0 . B0 . R1 C1 . M1 . 23002.773523 secs L0 O1 . *. . S1 . S0 . B0 . R1 C1 . M1 . 23002.773531 secs L0 O1 . . . S1 . S0 . B0 . R1 C1 *T1 M1 . 23002.773547 secs T1 => irqbalance:2089 L0 O1 . . . S1 . S0 . *P0 . R1 C1 T1 M1 . 23002.773549 secs *N1 O1 . . . S1 . S0 . P0 . R1 C1 T1 M1 . 23002.773566 secs N1 O1 . . . *J0 . S0 . P0 . R1 C1 T1 M1 . 23002.773571 secs N1 O1 . . . J0 . S0 *B0 P0 . R1 C1 T1 M1 . 23002.773592 secs N1 O1 . . . J0 . *U0 B0 P0 . R1 C1 T1 M1 . 23002.773582 secs N1 O1 . . . *S1 . U0 B0 P0 . R1 C1 T1 M1 . 23002.773604 secs N1 O1 . . . S1 . U0 B0 *. . R1 C1 T1 M1 . 23002.773615 secs N1 O1 . . . S1 . U0 B0 . . *K0 C1 T1 M1 . 23002.773631 secs N1 O1 . *M0 . S1 . U0 B0 . . K0 C1 T1 M1 . 23002.773624 secs N1 O1 . M0 . S1 . U0 *. . . K0 C1 T1 M1 . 23002.773644 secs N1 O1 . M0 . S1 . U0 . . . *R1 C1 T1 M1 . 23002.773662 secs N1 O1 . M0 . S1 . *. . . . R1 C1 T1 M1 . 23002.773648 secs N1 O1 . *. . S1 . . . . . R1 C1 T1 M1 . 23002.773680 secs N1 O1 . . . *L0 . . . . . R1 C1 T1 M1 . 23002.773717 secs *N0 O1 . . . L0 . . . . . R1 C1 T1 M1 . 23002.773709 secs *N1 O1 . . . L0 . . . . . R1 C1 T1 M1 . 23002.773747 secs Columns stand for individual CPUs, from CPU0 to CPU15, and the two-letter shortcuts stand for tasks that are running on a CPU. '*' denotes the CPU that had the event. A dot signals an idle CPU. New tasks are assigned new two-letter shortcuts - when they occur first they are printed. In the above example 'T1' stood for irqbalance: T1 => irqbalance:2089 Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-16 23:40:48 +08:00
{
if (setup_map_cpus(sched))
return -1;
if (setup_color_pids(sched))
return -1;
if (setup_color_cpus(sched))
return -1;
perf sched: Add 'perf sched map' scheduling event map printout This prints a textual context-switching outline of workload captured via perf sched record. For example, on a 16 CPU box it outputs: N1 O1 . . . S1 . . . B0 . *I0 C1 . M1 . 23002.773423 secs N1 O1 . *Q0 . S1 . . . B0 . I0 C1 . M1 . 23002.773423 secs N1 O1 . Q0 . S1 . . . B0 . *R1 C1 . M1 . 23002.773485 secs N1 O1 . Q0 . S1 . *S0 . B0 . R1 C1 . M1 . 23002.773478 secs *L0 O1 . Q0 . S1 . S0 . B0 . R1 C1 . M1 . 23002.773523 secs L0 O1 . *. . S1 . S0 . B0 . R1 C1 . M1 . 23002.773531 secs L0 O1 . . . S1 . S0 . B0 . R1 C1 *T1 M1 . 23002.773547 secs T1 => irqbalance:2089 L0 O1 . . . S1 . S0 . *P0 . R1 C1 T1 M1 . 23002.773549 secs *N1 O1 . . . S1 . S0 . P0 . R1 C1 T1 M1 . 23002.773566 secs N1 O1 . . . *J0 . S0 . P0 . R1 C1 T1 M1 . 23002.773571 secs N1 O1 . . . J0 . S0 *B0 P0 . R1 C1 T1 M1 . 23002.773592 secs N1 O1 . . . J0 . *U0 B0 P0 . R1 C1 T1 M1 . 23002.773582 secs N1 O1 . . . *S1 . U0 B0 P0 . R1 C1 T1 M1 . 23002.773604 secs N1 O1 . . . S1 . U0 B0 *. . R1 C1 T1 M1 . 23002.773615 secs N1 O1 . . . S1 . U0 B0 . . *K0 C1 T1 M1 . 23002.773631 secs N1 O1 . *M0 . S1 . U0 B0 . . K0 C1 T1 M1 . 23002.773624 secs N1 O1 . M0 . S1 . U0 *. . . K0 C1 T1 M1 . 23002.773644 secs N1 O1 . M0 . S1 . U0 . . . *R1 C1 T1 M1 . 23002.773662 secs N1 O1 . M0 . S1 . *. . . . R1 C1 T1 M1 . 23002.773648 secs N1 O1 . *. . S1 . . . . . R1 C1 T1 M1 . 23002.773680 secs N1 O1 . . . *L0 . . . . . R1 C1 T1 M1 . 23002.773717 secs *N0 O1 . . . L0 . . . . . R1 C1 T1 M1 . 23002.773709 secs *N1 O1 . . . L0 . . . . . R1 C1 T1 M1 . 23002.773747 secs Columns stand for individual CPUs, from CPU0 to CPU15, and the two-letter shortcuts stand for tasks that are running on a CPU. '*' denotes the CPU that had the event. A dot signals an idle CPU. New tasks are assigned new two-letter shortcuts - when they occur first they are printed. In the above example 'T1' stood for irqbalance: T1 => irqbalance:2089 Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-16 23:40:48 +08:00
setup_pager();
if (perf_sched__read_events(sched))
return -1;
print_bad_events(sched);
return 0;
perf sched: Add 'perf sched map' scheduling event map printout This prints a textual context-switching outline of workload captured via perf sched record. For example, on a 16 CPU box it outputs: N1 O1 . . . S1 . . . B0 . *I0 C1 . M1 . 23002.773423 secs N1 O1 . *Q0 . S1 . . . B0 . I0 C1 . M1 . 23002.773423 secs N1 O1 . Q0 . S1 . . . B0 . *R1 C1 . M1 . 23002.773485 secs N1 O1 . Q0 . S1 . *S0 . B0 . R1 C1 . M1 . 23002.773478 secs *L0 O1 . Q0 . S1 . S0 . B0 . R1 C1 . M1 . 23002.773523 secs L0 O1 . *. . S1 . S0 . B0 . R1 C1 . M1 . 23002.773531 secs L0 O1 . . . S1 . S0 . B0 . R1 C1 *T1 M1 . 23002.773547 secs T1 => irqbalance:2089 L0 O1 . . . S1 . S0 . *P0 . R1 C1 T1 M1 . 23002.773549 secs *N1 O1 . . . S1 . S0 . P0 . R1 C1 T1 M1 . 23002.773566 secs N1 O1 . . . *J0 . S0 . P0 . R1 C1 T1 M1 . 23002.773571 secs N1 O1 . . . J0 . S0 *B0 P0 . R1 C1 T1 M1 . 23002.773592 secs N1 O1 . . . J0 . *U0 B0 P0 . R1 C1 T1 M1 . 23002.773582 secs N1 O1 . . . *S1 . U0 B0 P0 . R1 C1 T1 M1 . 23002.773604 secs N1 O1 . . . S1 . U0 B0 *. . R1 C1 T1 M1 . 23002.773615 secs N1 O1 . . . S1 . U0 B0 . . *K0 C1 T1 M1 . 23002.773631 secs N1 O1 . *M0 . S1 . U0 B0 . . K0 C1 T1 M1 . 23002.773624 secs N1 O1 . M0 . S1 . U0 *. . . K0 C1 T1 M1 . 23002.773644 secs N1 O1 . M0 . S1 . U0 . . . *R1 C1 T1 M1 . 23002.773662 secs N1 O1 . M0 . S1 . *. . . . R1 C1 T1 M1 . 23002.773648 secs N1 O1 . *. . S1 . . . . . R1 C1 T1 M1 . 23002.773680 secs N1 O1 . . . *L0 . . . . . R1 C1 T1 M1 . 23002.773717 secs *N0 O1 . . . L0 . . . . . R1 C1 T1 M1 . 23002.773709 secs *N1 O1 . . . L0 . . . . . R1 C1 T1 M1 . 23002.773747 secs Columns stand for individual CPUs, from CPU0 to CPU15, and the two-letter shortcuts stand for tasks that are running on a CPU. '*' denotes the CPU that had the event. A dot signals an idle CPU. New tasks are assigned new two-letter shortcuts - when they occur first they are printed. In the above example 'T1' stood for irqbalance: T1 => irqbalance:2089 Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-16 23:40:48 +08:00
}
static int perf_sched__replay(struct perf_sched *sched)
perf sched: Add 'perf sched map' scheduling event map printout This prints a textual context-switching outline of workload captured via perf sched record. For example, on a 16 CPU box it outputs: N1 O1 . . . S1 . . . B0 . *I0 C1 . M1 . 23002.773423 secs N1 O1 . *Q0 . S1 . . . B0 . I0 C1 . M1 . 23002.773423 secs N1 O1 . Q0 . S1 . . . B0 . *R1 C1 . M1 . 23002.773485 secs N1 O1 . Q0 . S1 . *S0 . B0 . R1 C1 . M1 . 23002.773478 secs *L0 O1 . Q0 . S1 . S0 . B0 . R1 C1 . M1 . 23002.773523 secs L0 O1 . *. . S1 . S0 . B0 . R1 C1 . M1 . 23002.773531 secs L0 O1 . . . S1 . S0 . B0 . R1 C1 *T1 M1 . 23002.773547 secs T1 => irqbalance:2089 L0 O1 . . . S1 . S0 . *P0 . R1 C1 T1 M1 . 23002.773549 secs *N1 O1 . . . S1 . S0 . P0 . R1 C1 T1 M1 . 23002.773566 secs N1 O1 . . . *J0 . S0 . P0 . R1 C1 T1 M1 . 23002.773571 secs N1 O1 . . . J0 . S0 *B0 P0 . R1 C1 T1 M1 . 23002.773592 secs N1 O1 . . . J0 . *U0 B0 P0 . R1 C1 T1 M1 . 23002.773582 secs N1 O1 . . . *S1 . U0 B0 P0 . R1 C1 T1 M1 . 23002.773604 secs N1 O1 . . . S1 . U0 B0 *. . R1 C1 T1 M1 . 23002.773615 secs N1 O1 . . . S1 . U0 B0 . . *K0 C1 T1 M1 . 23002.773631 secs N1 O1 . *M0 . S1 . U0 B0 . . K0 C1 T1 M1 . 23002.773624 secs N1 O1 . M0 . S1 . U0 *. . . K0 C1 T1 M1 . 23002.773644 secs N1 O1 . M0 . S1 . U0 . . . *R1 C1 T1 M1 . 23002.773662 secs N1 O1 . M0 . S1 . *. . . . R1 C1 T1 M1 . 23002.773648 secs N1 O1 . *. . S1 . . . . . R1 C1 T1 M1 . 23002.773680 secs N1 O1 . . . *L0 . . . . . R1 C1 T1 M1 . 23002.773717 secs *N0 O1 . . . L0 . . . . . R1 C1 T1 M1 . 23002.773709 secs *N1 O1 . . . L0 . . . . . R1 C1 T1 M1 . 23002.773747 secs Columns stand for individual CPUs, from CPU0 to CPU15, and the two-letter shortcuts stand for tasks that are running on a CPU. '*' denotes the CPU that had the event. A dot signals an idle CPU. New tasks are assigned new two-letter shortcuts - when they occur first they are printed. In the above example 'T1' stood for irqbalance: T1 => irqbalance:2089 Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-16 23:40:48 +08:00
{
unsigned long i;
calibrate_run_measurement_overhead(sched);
calibrate_sleep_measurement_overhead(sched);
perf sched: Add 'perf sched map' scheduling event map printout This prints a textual context-switching outline of workload captured via perf sched record. For example, on a 16 CPU box it outputs: N1 O1 . . . S1 . . . B0 . *I0 C1 . M1 . 23002.773423 secs N1 O1 . *Q0 . S1 . . . B0 . I0 C1 . M1 . 23002.773423 secs N1 O1 . Q0 . S1 . . . B0 . *R1 C1 . M1 . 23002.773485 secs N1 O1 . Q0 . S1 . *S0 . B0 . R1 C1 . M1 . 23002.773478 secs *L0 O1 . Q0 . S1 . S0 . B0 . R1 C1 . M1 . 23002.773523 secs L0 O1 . *. . S1 . S0 . B0 . R1 C1 . M1 . 23002.773531 secs L0 O1 . . . S1 . S0 . B0 . R1 C1 *T1 M1 . 23002.773547 secs T1 => irqbalance:2089 L0 O1 . . . S1 . S0 . *P0 . R1 C1 T1 M1 . 23002.773549 secs *N1 O1 . . . S1 . S0 . P0 . R1 C1 T1 M1 . 23002.773566 secs N1 O1 . . . *J0 . S0 . P0 . R1 C1 T1 M1 . 23002.773571 secs N1 O1 . . . J0 . S0 *B0 P0 . R1 C1 T1 M1 . 23002.773592 secs N1 O1 . . . J0 . *U0 B0 P0 . R1 C1 T1 M1 . 23002.773582 secs N1 O1 . . . *S1 . U0 B0 P0 . R1 C1 T1 M1 . 23002.773604 secs N1 O1 . . . S1 . U0 B0 *. . R1 C1 T1 M1 . 23002.773615 secs N1 O1 . . . S1 . U0 B0 . . *K0 C1 T1 M1 . 23002.773631 secs N1 O1 . *M0 . S1 . U0 B0 . . K0 C1 T1 M1 . 23002.773624 secs N1 O1 . M0 . S1 . U0 *. . . K0 C1 T1 M1 . 23002.773644 secs N1 O1 . M0 . S1 . U0 . . . *R1 C1 T1 M1 . 23002.773662 secs N1 O1 . M0 . S1 . *. . . . R1 C1 T1 M1 . 23002.773648 secs N1 O1 . *. . S1 . . . . . R1 C1 T1 M1 . 23002.773680 secs N1 O1 . . . *L0 . . . . . R1 C1 T1 M1 . 23002.773717 secs *N0 O1 . . . L0 . . . . . R1 C1 T1 M1 . 23002.773709 secs *N1 O1 . . . L0 . . . . . R1 C1 T1 M1 . 23002.773747 secs Columns stand for individual CPUs, from CPU0 to CPU15, and the two-letter shortcuts stand for tasks that are running on a CPU. '*' denotes the CPU that had the event. A dot signals an idle CPU. New tasks are assigned new two-letter shortcuts - when they occur first they are printed. In the above example 'T1' stood for irqbalance: T1 => irqbalance:2089 Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-16 23:40:48 +08:00
test_calibrations(sched);
perf sched: Add 'perf sched map' scheduling event map printout This prints a textual context-switching outline of workload captured via perf sched record. For example, on a 16 CPU box it outputs: N1 O1 . . . S1 . . . B0 . *I0 C1 . M1 . 23002.773423 secs N1 O1 . *Q0 . S1 . . . B0 . I0 C1 . M1 . 23002.773423 secs N1 O1 . Q0 . S1 . . . B0 . *R1 C1 . M1 . 23002.773485 secs N1 O1 . Q0 . S1 . *S0 . B0 . R1 C1 . M1 . 23002.773478 secs *L0 O1 . Q0 . S1 . S0 . B0 . R1 C1 . M1 . 23002.773523 secs L0 O1 . *. . S1 . S0 . B0 . R1 C1 . M1 . 23002.773531 secs L0 O1 . . . S1 . S0 . B0 . R1 C1 *T1 M1 . 23002.773547 secs T1 => irqbalance:2089 L0 O1 . . . S1 . S0 . *P0 . R1 C1 T1 M1 . 23002.773549 secs *N1 O1 . . . S1 . S0 . P0 . R1 C1 T1 M1 . 23002.773566 secs N1 O1 . . . *J0 . S0 . P0 . R1 C1 T1 M1 . 23002.773571 secs N1 O1 . . . J0 . S0 *B0 P0 . R1 C1 T1 M1 . 23002.773592 secs N1 O1 . . . J0 . *U0 B0 P0 . R1 C1 T1 M1 . 23002.773582 secs N1 O1 . . . *S1 . U0 B0 P0 . R1 C1 T1 M1 . 23002.773604 secs N1 O1 . . . S1 . U0 B0 *. . R1 C1 T1 M1 . 23002.773615 secs N1 O1 . . . S1 . U0 B0 . . *K0 C1 T1 M1 . 23002.773631 secs N1 O1 . *M0 . S1 . U0 B0 . . K0 C1 T1 M1 . 23002.773624 secs N1 O1 . M0 . S1 . U0 *. . . K0 C1 T1 M1 . 23002.773644 secs N1 O1 . M0 . S1 . U0 . . . *R1 C1 T1 M1 . 23002.773662 secs N1 O1 . M0 . S1 . *. . . . R1 C1 T1 M1 . 23002.773648 secs N1 O1 . *. . S1 . . . . . R1 C1 T1 M1 . 23002.773680 secs N1 O1 . . . *L0 . . . . . R1 C1 T1 M1 . 23002.773717 secs *N0 O1 . . . L0 . . . . . R1 C1 T1 M1 . 23002.773709 secs *N1 O1 . . . L0 . . . . . R1 C1 T1 M1 . 23002.773747 secs Columns stand for individual CPUs, from CPU0 to CPU15, and the two-letter shortcuts stand for tasks that are running on a CPU. '*' denotes the CPU that had the event. A dot signals an idle CPU. New tasks are assigned new two-letter shortcuts - when they occur first they are printed. In the above example 'T1' stood for irqbalance: T1 => irqbalance:2089 Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-16 23:40:48 +08:00
if (perf_sched__read_events(sched))
return -1;
perf sched: Add 'perf sched map' scheduling event map printout This prints a textual context-switching outline of workload captured via perf sched record. For example, on a 16 CPU box it outputs: N1 O1 . . . S1 . . . B0 . *I0 C1 . M1 . 23002.773423 secs N1 O1 . *Q0 . S1 . . . B0 . I0 C1 . M1 . 23002.773423 secs N1 O1 . Q0 . S1 . . . B0 . *R1 C1 . M1 . 23002.773485 secs N1 O1 . Q0 . S1 . *S0 . B0 . R1 C1 . M1 . 23002.773478 secs *L0 O1 . Q0 . S1 . S0 . B0 . R1 C1 . M1 . 23002.773523 secs L0 O1 . *. . S1 . S0 . B0 . R1 C1 . M1 . 23002.773531 secs L0 O1 . . . S1 . S0 . B0 . R1 C1 *T1 M1 . 23002.773547 secs T1 => irqbalance:2089 L0 O1 . . . S1 . S0 . *P0 . R1 C1 T1 M1 . 23002.773549 secs *N1 O1 . . . S1 . S0 . P0 . R1 C1 T1 M1 . 23002.773566 secs N1 O1 . . . *J0 . S0 . P0 . R1 C1 T1 M1 . 23002.773571 secs N1 O1 . . . J0 . S0 *B0 P0 . R1 C1 T1 M1 . 23002.773592 secs N1 O1 . . . J0 . *U0 B0 P0 . R1 C1 T1 M1 . 23002.773582 secs N1 O1 . . . *S1 . U0 B0 P0 . R1 C1 T1 M1 . 23002.773604 secs N1 O1 . . . S1 . U0 B0 *. . R1 C1 T1 M1 . 23002.773615 secs N1 O1 . . . S1 . U0 B0 . . *K0 C1 T1 M1 . 23002.773631 secs N1 O1 . *M0 . S1 . U0 B0 . . K0 C1 T1 M1 . 23002.773624 secs N1 O1 . M0 . S1 . U0 *. . . K0 C1 T1 M1 . 23002.773644 secs N1 O1 . M0 . S1 . U0 . . . *R1 C1 T1 M1 . 23002.773662 secs N1 O1 . M0 . S1 . *. . . . R1 C1 T1 M1 . 23002.773648 secs N1 O1 . *. . S1 . . . . . R1 C1 T1 M1 . 23002.773680 secs N1 O1 . . . *L0 . . . . . R1 C1 T1 M1 . 23002.773717 secs *N0 O1 . . . L0 . . . . . R1 C1 T1 M1 . 23002.773709 secs *N1 O1 . . . L0 . . . . . R1 C1 T1 M1 . 23002.773747 secs Columns stand for individual CPUs, from CPU0 to CPU15, and the two-letter shortcuts stand for tasks that are running on a CPU. '*' denotes the CPU that had the event. A dot signals an idle CPU. New tasks are assigned new two-letter shortcuts - when they occur first they are printed. In the above example 'T1' stood for irqbalance: T1 => irqbalance:2089 Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-16 23:40:48 +08:00
printf("nr_run_events: %ld\n", sched->nr_run_events);
printf("nr_sleep_events: %ld\n", sched->nr_sleep_events);
printf("nr_wakeup_events: %ld\n", sched->nr_wakeup_events);
perf sched: Add 'perf sched map' scheduling event map printout This prints a textual context-switching outline of workload captured via perf sched record. For example, on a 16 CPU box it outputs: N1 O1 . . . S1 . . . B0 . *I0 C1 . M1 . 23002.773423 secs N1 O1 . *Q0 . S1 . . . B0 . I0 C1 . M1 . 23002.773423 secs N1 O1 . Q0 . S1 . . . B0 . *R1 C1 . M1 . 23002.773485 secs N1 O1 . Q0 . S1 . *S0 . B0 . R1 C1 . M1 . 23002.773478 secs *L0 O1 . Q0 . S1 . S0 . B0 . R1 C1 . M1 . 23002.773523 secs L0 O1 . *. . S1 . S0 . B0 . R1 C1 . M1 . 23002.773531 secs L0 O1 . . . S1 . S0 . B0 . R1 C1 *T1 M1 . 23002.773547 secs T1 => irqbalance:2089 L0 O1 . . . S1 . S0 . *P0 . R1 C1 T1 M1 . 23002.773549 secs *N1 O1 . . . S1 . S0 . P0 . R1 C1 T1 M1 . 23002.773566 secs N1 O1 . . . *J0 . S0 . P0 . R1 C1 T1 M1 . 23002.773571 secs N1 O1 . . . J0 . S0 *B0 P0 . R1 C1 T1 M1 . 23002.773592 secs N1 O1 . . . J0 . *U0 B0 P0 . R1 C1 T1 M1 . 23002.773582 secs N1 O1 . . . *S1 . U0 B0 P0 . R1 C1 T1 M1 . 23002.773604 secs N1 O1 . . . S1 . U0 B0 *. . R1 C1 T1 M1 . 23002.773615 secs N1 O1 . . . S1 . U0 B0 . . *K0 C1 T1 M1 . 23002.773631 secs N1 O1 . *M0 . S1 . U0 B0 . . K0 C1 T1 M1 . 23002.773624 secs N1 O1 . M0 . S1 . U0 *. . . K0 C1 T1 M1 . 23002.773644 secs N1 O1 . M0 . S1 . U0 . . . *R1 C1 T1 M1 . 23002.773662 secs N1 O1 . M0 . S1 . *. . . . R1 C1 T1 M1 . 23002.773648 secs N1 O1 . *. . S1 . . . . . R1 C1 T1 M1 . 23002.773680 secs N1 O1 . . . *L0 . . . . . R1 C1 T1 M1 . 23002.773717 secs *N0 O1 . . . L0 . . . . . R1 C1 T1 M1 . 23002.773709 secs *N1 O1 . . . L0 . . . . . R1 C1 T1 M1 . 23002.773747 secs Columns stand for individual CPUs, from CPU0 to CPU15, and the two-letter shortcuts stand for tasks that are running on a CPU. '*' denotes the CPU that had the event. A dot signals an idle CPU. New tasks are assigned new two-letter shortcuts - when they occur first they are printed. In the above example 'T1' stood for irqbalance: T1 => irqbalance:2089 Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-16 23:40:48 +08:00
if (sched->targetless_wakeups)
printf("target-less wakeups: %ld\n", sched->targetless_wakeups);
if (sched->multitarget_wakeups)
printf("multi-target wakeups: %ld\n", sched->multitarget_wakeups);
if (sched->nr_run_events_optimized)
perf sched: Add 'perf sched map' scheduling event map printout This prints a textual context-switching outline of workload captured via perf sched record. For example, on a 16 CPU box it outputs: N1 O1 . . . S1 . . . B0 . *I0 C1 . M1 . 23002.773423 secs N1 O1 . *Q0 . S1 . . . B0 . I0 C1 . M1 . 23002.773423 secs N1 O1 . Q0 . S1 . . . B0 . *R1 C1 . M1 . 23002.773485 secs N1 O1 . Q0 . S1 . *S0 . B0 . R1 C1 . M1 . 23002.773478 secs *L0 O1 . Q0 . S1 . S0 . B0 . R1 C1 . M1 . 23002.773523 secs L0 O1 . *. . S1 . S0 . B0 . R1 C1 . M1 . 23002.773531 secs L0 O1 . . . S1 . S0 . B0 . R1 C1 *T1 M1 . 23002.773547 secs T1 => irqbalance:2089 L0 O1 . . . S1 . S0 . *P0 . R1 C1 T1 M1 . 23002.773549 secs *N1 O1 . . . S1 . S0 . P0 . R1 C1 T1 M1 . 23002.773566 secs N1 O1 . . . *J0 . S0 . P0 . R1 C1 T1 M1 . 23002.773571 secs N1 O1 . . . J0 . S0 *B0 P0 . R1 C1 T1 M1 . 23002.773592 secs N1 O1 . . . J0 . *U0 B0 P0 . R1 C1 T1 M1 . 23002.773582 secs N1 O1 . . . *S1 . U0 B0 P0 . R1 C1 T1 M1 . 23002.773604 secs N1 O1 . . . S1 . U0 B0 *. . R1 C1 T1 M1 . 23002.773615 secs N1 O1 . . . S1 . U0 B0 . . *K0 C1 T1 M1 . 23002.773631 secs N1 O1 . *M0 . S1 . U0 B0 . . K0 C1 T1 M1 . 23002.773624 secs N1 O1 . M0 . S1 . U0 *. . . K0 C1 T1 M1 . 23002.773644 secs N1 O1 . M0 . S1 . U0 . . . *R1 C1 T1 M1 . 23002.773662 secs N1 O1 . M0 . S1 . *. . . . R1 C1 T1 M1 . 23002.773648 secs N1 O1 . *. . S1 . . . . . R1 C1 T1 M1 . 23002.773680 secs N1 O1 . . . *L0 . . . . . R1 C1 T1 M1 . 23002.773717 secs *N0 O1 . . . L0 . . . . . R1 C1 T1 M1 . 23002.773709 secs *N1 O1 . . . L0 . . . . . R1 C1 T1 M1 . 23002.773747 secs Columns stand for individual CPUs, from CPU0 to CPU15, and the two-letter shortcuts stand for tasks that are running on a CPU. '*' denotes the CPU that had the event. A dot signals an idle CPU. New tasks are assigned new two-letter shortcuts - when they occur first they are printed. In the above example 'T1' stood for irqbalance: T1 => irqbalance:2089 Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-16 23:40:48 +08:00
printf("run atoms optimized: %ld\n",
sched->nr_run_events_optimized);
perf sched: Add 'perf sched map' scheduling event map printout This prints a textual context-switching outline of workload captured via perf sched record. For example, on a 16 CPU box it outputs: N1 O1 . . . S1 . . . B0 . *I0 C1 . M1 . 23002.773423 secs N1 O1 . *Q0 . S1 . . . B0 . I0 C1 . M1 . 23002.773423 secs N1 O1 . Q0 . S1 . . . B0 . *R1 C1 . M1 . 23002.773485 secs N1 O1 . Q0 . S1 . *S0 . B0 . R1 C1 . M1 . 23002.773478 secs *L0 O1 . Q0 . S1 . S0 . B0 . R1 C1 . M1 . 23002.773523 secs L0 O1 . *. . S1 . S0 . B0 . R1 C1 . M1 . 23002.773531 secs L0 O1 . . . S1 . S0 . B0 . R1 C1 *T1 M1 . 23002.773547 secs T1 => irqbalance:2089 L0 O1 . . . S1 . S0 . *P0 . R1 C1 T1 M1 . 23002.773549 secs *N1 O1 . . . S1 . S0 . P0 . R1 C1 T1 M1 . 23002.773566 secs N1 O1 . . . *J0 . S0 . P0 . R1 C1 T1 M1 . 23002.773571 secs N1 O1 . . . J0 . S0 *B0 P0 . R1 C1 T1 M1 . 23002.773592 secs N1 O1 . . . J0 . *U0 B0 P0 . R1 C1 T1 M1 . 23002.773582 secs N1 O1 . . . *S1 . U0 B0 P0 . R1 C1 T1 M1 . 23002.773604 secs N1 O1 . . . S1 . U0 B0 *. . R1 C1 T1 M1 . 23002.773615 secs N1 O1 . . . S1 . U0 B0 . . *K0 C1 T1 M1 . 23002.773631 secs N1 O1 . *M0 . S1 . U0 B0 . . K0 C1 T1 M1 . 23002.773624 secs N1 O1 . M0 . S1 . U0 *. . . K0 C1 T1 M1 . 23002.773644 secs N1 O1 . M0 . S1 . U0 . . . *R1 C1 T1 M1 . 23002.773662 secs N1 O1 . M0 . S1 . *. . . . R1 C1 T1 M1 . 23002.773648 secs N1 O1 . *. . S1 . . . . . R1 C1 T1 M1 . 23002.773680 secs N1 O1 . . . *L0 . . . . . R1 C1 T1 M1 . 23002.773717 secs *N0 O1 . . . L0 . . . . . R1 C1 T1 M1 . 23002.773709 secs *N1 O1 . . . L0 . . . . . R1 C1 T1 M1 . 23002.773747 secs Columns stand for individual CPUs, from CPU0 to CPU15, and the two-letter shortcuts stand for tasks that are running on a CPU. '*' denotes the CPU that had the event. A dot signals an idle CPU. New tasks are assigned new two-letter shortcuts - when they occur first they are printed. In the above example 'T1' stood for irqbalance: T1 => irqbalance:2089 Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-16 23:40:48 +08:00
print_task_traces(sched);
add_cross_task_wakeups(sched);
perf sched: Add 'perf sched map' scheduling event map printout This prints a textual context-switching outline of workload captured via perf sched record. For example, on a 16 CPU box it outputs: N1 O1 . . . S1 . . . B0 . *I0 C1 . M1 . 23002.773423 secs N1 O1 . *Q0 . S1 . . . B0 . I0 C1 . M1 . 23002.773423 secs N1 O1 . Q0 . S1 . . . B0 . *R1 C1 . M1 . 23002.773485 secs N1 O1 . Q0 . S1 . *S0 . B0 . R1 C1 . M1 . 23002.773478 secs *L0 O1 . Q0 . S1 . S0 . B0 . R1 C1 . M1 . 23002.773523 secs L0 O1 . *. . S1 . S0 . B0 . R1 C1 . M1 . 23002.773531 secs L0 O1 . . . S1 . S0 . B0 . R1 C1 *T1 M1 . 23002.773547 secs T1 => irqbalance:2089 L0 O1 . . . S1 . S0 . *P0 . R1 C1 T1 M1 . 23002.773549 secs *N1 O1 . . . S1 . S0 . P0 . R1 C1 T1 M1 . 23002.773566 secs N1 O1 . . . *J0 . S0 . P0 . R1 C1 T1 M1 . 23002.773571 secs N1 O1 . . . J0 . S0 *B0 P0 . R1 C1 T1 M1 . 23002.773592 secs N1 O1 . . . J0 . *U0 B0 P0 . R1 C1 T1 M1 . 23002.773582 secs N1 O1 . . . *S1 . U0 B0 P0 . R1 C1 T1 M1 . 23002.773604 secs N1 O1 . . . S1 . U0 B0 *. . R1 C1 T1 M1 . 23002.773615 secs N1 O1 . . . S1 . U0 B0 . . *K0 C1 T1 M1 . 23002.773631 secs N1 O1 . *M0 . S1 . U0 B0 . . K0 C1 T1 M1 . 23002.773624 secs N1 O1 . M0 . S1 . U0 *. . . K0 C1 T1 M1 . 23002.773644 secs N1 O1 . M0 . S1 . U0 . . . *R1 C1 T1 M1 . 23002.773662 secs N1 O1 . M0 . S1 . *. . . . R1 C1 T1 M1 . 23002.773648 secs N1 O1 . *. . S1 . . . . . R1 C1 T1 M1 . 23002.773680 secs N1 O1 . . . *L0 . . . . . R1 C1 T1 M1 . 23002.773717 secs *N0 O1 . . . L0 . . . . . R1 C1 T1 M1 . 23002.773709 secs *N1 O1 . . . L0 . . . . . R1 C1 T1 M1 . 23002.773747 secs Columns stand for individual CPUs, from CPU0 to CPU15, and the two-letter shortcuts stand for tasks that are running on a CPU. '*' denotes the CPU that had the event. A dot signals an idle CPU. New tasks are assigned new two-letter shortcuts - when they occur first they are printed. In the above example 'T1' stood for irqbalance: T1 => irqbalance:2089 Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-16 23:40:48 +08:00
create_tasks(sched);
perf sched: Add 'perf sched map' scheduling event map printout This prints a textual context-switching outline of workload captured via perf sched record. For example, on a 16 CPU box it outputs: N1 O1 . . . S1 . . . B0 . *I0 C1 . M1 . 23002.773423 secs N1 O1 . *Q0 . S1 . . . B0 . I0 C1 . M1 . 23002.773423 secs N1 O1 . Q0 . S1 . . . B0 . *R1 C1 . M1 . 23002.773485 secs N1 O1 . Q0 . S1 . *S0 . B0 . R1 C1 . M1 . 23002.773478 secs *L0 O1 . Q0 . S1 . S0 . B0 . R1 C1 . M1 . 23002.773523 secs L0 O1 . *. . S1 . S0 . B0 . R1 C1 . M1 . 23002.773531 secs L0 O1 . . . S1 . S0 . B0 . R1 C1 *T1 M1 . 23002.773547 secs T1 => irqbalance:2089 L0 O1 . . . S1 . S0 . *P0 . R1 C1 T1 M1 . 23002.773549 secs *N1 O1 . . . S1 . S0 . P0 . R1 C1 T1 M1 . 23002.773566 secs N1 O1 . . . *J0 . S0 . P0 . R1 C1 T1 M1 . 23002.773571 secs N1 O1 . . . J0 . S0 *B0 P0 . R1 C1 T1 M1 . 23002.773592 secs N1 O1 . . . J0 . *U0 B0 P0 . R1 C1 T1 M1 . 23002.773582 secs N1 O1 . . . *S1 . U0 B0 P0 . R1 C1 T1 M1 . 23002.773604 secs N1 O1 . . . S1 . U0 B0 *. . R1 C1 T1 M1 . 23002.773615 secs N1 O1 . . . S1 . U0 B0 . . *K0 C1 T1 M1 . 23002.773631 secs N1 O1 . *M0 . S1 . U0 B0 . . K0 C1 T1 M1 . 23002.773624 secs N1 O1 . M0 . S1 . U0 *. . . K0 C1 T1 M1 . 23002.773644 secs N1 O1 . M0 . S1 . U0 . . . *R1 C1 T1 M1 . 23002.773662 secs N1 O1 . M0 . S1 . *. . . . R1 C1 T1 M1 . 23002.773648 secs N1 O1 . *. . S1 . . . . . R1 C1 T1 M1 . 23002.773680 secs N1 O1 . . . *L0 . . . . . R1 C1 T1 M1 . 23002.773717 secs *N0 O1 . . . L0 . . . . . R1 C1 T1 M1 . 23002.773709 secs *N1 O1 . . . L0 . . . . . R1 C1 T1 M1 . 23002.773747 secs Columns stand for individual CPUs, from CPU0 to CPU15, and the two-letter shortcuts stand for tasks that are running on a CPU. '*' denotes the CPU that had the event. A dot signals an idle CPU. New tasks are assigned new two-letter shortcuts - when they occur first they are printed. In the above example 'T1' stood for irqbalance: T1 => irqbalance:2089 Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-16 23:40:48 +08:00
printf("------------------------------------------------------------\n");
for (i = 0; i < sched->replay_repeat; i++)
run_one_test(sched);
return 0;
perf sched: Add 'perf sched map' scheduling event map printout This prints a textual context-switching outline of workload captured via perf sched record. For example, on a 16 CPU box it outputs: N1 O1 . . . S1 . . . B0 . *I0 C1 . M1 . 23002.773423 secs N1 O1 . *Q0 . S1 . . . B0 . I0 C1 . M1 . 23002.773423 secs N1 O1 . Q0 . S1 . . . B0 . *R1 C1 . M1 . 23002.773485 secs N1 O1 . Q0 . S1 . *S0 . B0 . R1 C1 . M1 . 23002.773478 secs *L0 O1 . Q0 . S1 . S0 . B0 . R1 C1 . M1 . 23002.773523 secs L0 O1 . *. . S1 . S0 . B0 . R1 C1 . M1 . 23002.773531 secs L0 O1 . . . S1 . S0 . B0 . R1 C1 *T1 M1 . 23002.773547 secs T1 => irqbalance:2089 L0 O1 . . . S1 . S0 . *P0 . R1 C1 T1 M1 . 23002.773549 secs *N1 O1 . . . S1 . S0 . P0 . R1 C1 T1 M1 . 23002.773566 secs N1 O1 . . . *J0 . S0 . P0 . R1 C1 T1 M1 . 23002.773571 secs N1 O1 . . . J0 . S0 *B0 P0 . R1 C1 T1 M1 . 23002.773592 secs N1 O1 . . . J0 . *U0 B0 P0 . R1 C1 T1 M1 . 23002.773582 secs N1 O1 . . . *S1 . U0 B0 P0 . R1 C1 T1 M1 . 23002.773604 secs N1 O1 . . . S1 . U0 B0 *. . R1 C1 T1 M1 . 23002.773615 secs N1 O1 . . . S1 . U0 B0 . . *K0 C1 T1 M1 . 23002.773631 secs N1 O1 . *M0 . S1 . U0 B0 . . K0 C1 T1 M1 . 23002.773624 secs N1 O1 . M0 . S1 . U0 *. . . K0 C1 T1 M1 . 23002.773644 secs N1 O1 . M0 . S1 . U0 . . . *R1 C1 T1 M1 . 23002.773662 secs N1 O1 . M0 . S1 . *. . . . R1 C1 T1 M1 . 23002.773648 secs N1 O1 . *. . S1 . . . . . R1 C1 T1 M1 . 23002.773680 secs N1 O1 . . . *L0 . . . . . R1 C1 T1 M1 . 23002.773717 secs *N0 O1 . . . L0 . . . . . R1 C1 T1 M1 . 23002.773709 secs *N1 O1 . . . L0 . . . . . R1 C1 T1 M1 . 23002.773747 secs Columns stand for individual CPUs, from CPU0 to CPU15, and the two-letter shortcuts stand for tasks that are running on a CPU. '*' denotes the CPU that had the event. A dot signals an idle CPU. New tasks are assigned new two-letter shortcuts - when they occur first they are printed. In the above example 'T1' stood for irqbalance: T1 => irqbalance:2089 Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-16 23:40:48 +08:00
}
static void setup_sorting(struct perf_sched *sched, const struct option *options,
const char * const usage_msg[])
perf sched: Implement multidimensional sorting Implement multidimensional sorting on perf sched so that you can sort either by number of switches, latency average, latency maximum, runtime. perf sched -l -s avg,max (this is the default) ----------------------------------------------------------------------------------- Task | Runtime ms | Switches | Average delay ms | Maximum delay ms | ----------------------------------------------------------------------------------- gnome-power-man | 0.113 ms | 1 | avg: 4998.531 ms | max: 4998.531 ms | xfdesktop | 1.190 ms | 7 | avg: 136.475 ms | max: 940.933 ms | xfce-mcs-manage | 2.194 ms | 22 | avg: 38.534 ms | max: 735.174 ms | notification-da | 2.749 ms | 31 | avg: 27.436 ms | max: 731.791 ms | xfce4-session | 3.343 ms | 28 | avg: 26.796 ms | max: 734.891 ms | xfwm4 | 3.159 ms | 22 | avg: 12.406 ms | max: 241.333 ms | xchat | 42.789 ms | 214 | avg: 11.886 ms | max: 100.349 ms | xfce4-terminal | 5.386 ms | 22 | avg: 11.414 ms | max: 241.611 ms | firefox | 151.992 ms | 123 | avg: 9.543 ms | max: 153.717 ms | xfce4-panel | 24.324 ms | 47 | avg: 8.189 ms | max: 242.352 ms | :5090 | 6.932 ms | 111 | avg: 8.131 ms | max: 102.665 ms | events/0 | 0.758 ms | 12 | avg: 1.964 ms | max: 21.879 ms | Xorg | 280.558 ms | 340 | avg: 1.864 ms | max: 99.526 ms | geany | 63.391 ms | 295 | avg: 1.099 ms | max: 9.334 ms | reiserfs/0 | 0.039 ms | 2 | avg: 0.854 ms | max: 1.487 ms | kondemand/0 | 8.251 ms | 245 | avg: 0.691 ms | max: 34.372 ms | Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-13 09:36:29 +08:00
{
char *tmp, *tok, *str = strdup(sched->sort_order);
perf sched: Implement multidimensional sorting Implement multidimensional sorting on perf sched so that you can sort either by number of switches, latency average, latency maximum, runtime. perf sched -l -s avg,max (this is the default) ----------------------------------------------------------------------------------- Task | Runtime ms | Switches | Average delay ms | Maximum delay ms | ----------------------------------------------------------------------------------- gnome-power-man | 0.113 ms | 1 | avg: 4998.531 ms | max: 4998.531 ms | xfdesktop | 1.190 ms | 7 | avg: 136.475 ms | max: 940.933 ms | xfce-mcs-manage | 2.194 ms | 22 | avg: 38.534 ms | max: 735.174 ms | notification-da | 2.749 ms | 31 | avg: 27.436 ms | max: 731.791 ms | xfce4-session | 3.343 ms | 28 | avg: 26.796 ms | max: 734.891 ms | xfwm4 | 3.159 ms | 22 | avg: 12.406 ms | max: 241.333 ms | xchat | 42.789 ms | 214 | avg: 11.886 ms | max: 100.349 ms | xfce4-terminal | 5.386 ms | 22 | avg: 11.414 ms | max: 241.611 ms | firefox | 151.992 ms | 123 | avg: 9.543 ms | max: 153.717 ms | xfce4-panel | 24.324 ms | 47 | avg: 8.189 ms | max: 242.352 ms | :5090 | 6.932 ms | 111 | avg: 8.131 ms | max: 102.665 ms | events/0 | 0.758 ms | 12 | avg: 1.964 ms | max: 21.879 ms | Xorg | 280.558 ms | 340 | avg: 1.864 ms | max: 99.526 ms | geany | 63.391 ms | 295 | avg: 1.099 ms | max: 9.334 ms | reiserfs/0 | 0.039 ms | 2 | avg: 0.854 ms | max: 1.487 ms | kondemand/0 | 8.251 ms | 245 | avg: 0.691 ms | max: 34.372 ms | Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-13 09:36:29 +08:00
for (tok = strtok_r(str, ", ", &tmp);
tok; tok = strtok_r(NULL, ", ", &tmp)) {
if (sort_dimension__add(tok, &sched->sort_list) < 0) {
usage_with_options_msg(usage_msg, options,
"Unknown --sort key: `%s'", tok);
perf sched: Implement multidimensional sorting Implement multidimensional sorting on perf sched so that you can sort either by number of switches, latency average, latency maximum, runtime. perf sched -l -s avg,max (this is the default) ----------------------------------------------------------------------------------- Task | Runtime ms | Switches | Average delay ms | Maximum delay ms | ----------------------------------------------------------------------------------- gnome-power-man | 0.113 ms | 1 | avg: 4998.531 ms | max: 4998.531 ms | xfdesktop | 1.190 ms | 7 | avg: 136.475 ms | max: 940.933 ms | xfce-mcs-manage | 2.194 ms | 22 | avg: 38.534 ms | max: 735.174 ms | notification-da | 2.749 ms | 31 | avg: 27.436 ms | max: 731.791 ms | xfce4-session | 3.343 ms | 28 | avg: 26.796 ms | max: 734.891 ms | xfwm4 | 3.159 ms | 22 | avg: 12.406 ms | max: 241.333 ms | xchat | 42.789 ms | 214 | avg: 11.886 ms | max: 100.349 ms | xfce4-terminal | 5.386 ms | 22 | avg: 11.414 ms | max: 241.611 ms | firefox | 151.992 ms | 123 | avg: 9.543 ms | max: 153.717 ms | xfce4-panel | 24.324 ms | 47 | avg: 8.189 ms | max: 242.352 ms | :5090 | 6.932 ms | 111 | avg: 8.131 ms | max: 102.665 ms | events/0 | 0.758 ms | 12 | avg: 1.964 ms | max: 21.879 ms | Xorg | 280.558 ms | 340 | avg: 1.864 ms | max: 99.526 ms | geany | 63.391 ms | 295 | avg: 1.099 ms | max: 9.334 ms | reiserfs/0 | 0.039 ms | 2 | avg: 0.854 ms | max: 1.487 ms | kondemand/0 | 8.251 ms | 245 | avg: 0.691 ms | max: 34.372 ms | Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-13 09:36:29 +08:00
}
}
free(str);
sort_dimension__add("pid", &sched->cmp_pid);
perf sched: Implement multidimensional sorting Implement multidimensional sorting on perf sched so that you can sort either by number of switches, latency average, latency maximum, runtime. perf sched -l -s avg,max (this is the default) ----------------------------------------------------------------------------------- Task | Runtime ms | Switches | Average delay ms | Maximum delay ms | ----------------------------------------------------------------------------------- gnome-power-man | 0.113 ms | 1 | avg: 4998.531 ms | max: 4998.531 ms | xfdesktop | 1.190 ms | 7 | avg: 136.475 ms | max: 940.933 ms | xfce-mcs-manage | 2.194 ms | 22 | avg: 38.534 ms | max: 735.174 ms | notification-da | 2.749 ms | 31 | avg: 27.436 ms | max: 731.791 ms | xfce4-session | 3.343 ms | 28 | avg: 26.796 ms | max: 734.891 ms | xfwm4 | 3.159 ms | 22 | avg: 12.406 ms | max: 241.333 ms | xchat | 42.789 ms | 214 | avg: 11.886 ms | max: 100.349 ms | xfce4-terminal | 5.386 ms | 22 | avg: 11.414 ms | max: 241.611 ms | firefox | 151.992 ms | 123 | avg: 9.543 ms | max: 153.717 ms | xfce4-panel | 24.324 ms | 47 | avg: 8.189 ms | max: 242.352 ms | :5090 | 6.932 ms | 111 | avg: 8.131 ms | max: 102.665 ms | events/0 | 0.758 ms | 12 | avg: 1.964 ms | max: 21.879 ms | Xorg | 280.558 ms | 340 | avg: 1.864 ms | max: 99.526 ms | geany | 63.391 ms | 295 | avg: 1.099 ms | max: 9.334 ms | reiserfs/0 | 0.039 ms | 2 | avg: 0.854 ms | max: 1.487 ms | kondemand/0 | 8.251 ms | 245 | avg: 0.691 ms | max: 34.372 ms | Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-13 09:36:29 +08:00
}
static int __cmd_record(int argc, const char **argv)
{
unsigned int rec_argc, i, j;
const char **rec_argv;
const char * const record_args[] = {
"record",
"-a",
"-R",
"-m", "1024",
"-c", "1",
"-e", "sched:sched_switch",
"-e", "sched:sched_stat_wait",
"-e", "sched:sched_stat_sleep",
"-e", "sched:sched_stat_iowait",
"-e", "sched:sched_stat_runtime",
"-e", "sched:sched_process_fork",
"-e", "sched:sched_wakeup",
"-e", "sched:sched_wakeup_new",
"-e", "sched:sched_migrate_task",
};
rec_argc = ARRAY_SIZE(record_args) + argc - 1;
rec_argv = calloc(rec_argc + 1, sizeof(char *));
if (rec_argv == NULL)
return -ENOMEM;
for (i = 0; i < ARRAY_SIZE(record_args); i++)
rec_argv[i] = strdup(record_args[i]);
for (j = 1; j < (unsigned int)argc; j++, i++)
rec_argv[i] = argv[j];
BUG_ON(i != rec_argc);
return cmd_record(i, rec_argv);
}
int cmd_sched(int argc, const char **argv)
{
perf tools: Replace automatic const char[] variables by statics An automatic const char[] variable gets initialized at runtime, just like any other automatic variable. For long strings, that uses a lot of stack and wastes time building the string; e.g. for the "No %s allocation events..." case one has: 444516: 48 b8 4e 6f 20 25 73 20 61 6c movabs $0x6c61207325206f4e,%rax # "No %s al" ... 444674: 48 89 45 80 mov %rax,-0x80(%rbp) 444678: 48 b8 6c 6f 63 61 74 69 6f 6e movabs $0x6e6f697461636f6c,%rax # "location" 444682: 48 89 45 88 mov %rax,-0x78(%rbp) 444686: 48 b8 20 65 76 65 6e 74 73 20 movabs $0x2073746e65766520,%rax # " events " 444690: 66 44 89 55 c4 mov %r10w,-0x3c(%rbp) 444695: 48 89 45 90 mov %rax,-0x70(%rbp) 444699: 48 b8 66 6f 75 6e 64 2e 20 20 movabs $0x20202e646e756f66,%rax Make them all static so that the compiler just references objects in .rodata. Committer testing: Ok, using dwarves's codiff tool: $ codiff --functions /tmp/perf.before ~/bin/perf builtin-sched.c: cmd_sched | -48 1 function changed, 48 bytes removed, diff: -48 builtin-report.c: cmd_report | -32 1 function changed, 32 bytes removed, diff: -32 builtin-kmem.c: cmd_kmem | -64 build_alloc_func_list | -50 2 functions changed, 114 bytes removed, diff: -114 builtin-c2c.c: perf_c2c__report | -390 1 function changed, 390 bytes removed, diff: -390 ui/browsers/header.c: tui__header_window | -104 1 function changed, 104 bytes removed, diff: -104 /home/acme/bin/perf: 9 functions changed, 688 bytes removed, diff: -688 Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Acked-by: Jiri Olsa <jolsa@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20181102230624.20064-1-linux@rasmusvillemoes.dk Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-11-03 07:06:23 +08:00
static const char default_sort_order[] = "avg, max, switch, runtime";
struct perf_sched sched = {
.tool = {
.sample = perf_sched__process_tracepoint_sample,
.comm = perf_sched__process_comm,
perf tools: Add PERF_RECORD_NAMESPACES to include namespaces related info Introduce a new option to record PERF_RECORD_NAMESPACES events emitted by the kernel when fork, clone, setns or unshare are invoked. And update perf-record documentation with the new option to record namespace events. Committer notes: Combined it with a later patch to allow printing it via 'perf report -D' and be able to test the feature introduced in this patch. Had to move here also perf_ns__name(), that was introduced in another later patch. Also used PRIu64 and PRIx64 to fix the build in some enfironments wrt: util/event.c:1129:39: error: format '%lx' expects argument of type 'long unsigned int', but argument 6 has type 'long long unsigned int' [-Werror=format=] ret += fprintf(fp, "%u/%s: %lu/0x%lx%s", idx ^ Testing it: # perf record --namespaces -a ^C[ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 1.083 MB perf.data (423 samples) ] # # perf report -D <SNIP> 3 2028902078892 0x115140 [0xa0]: PERF_RECORD_NAMESPACES 14783/14783 - nr_namespaces: 7 [0/net: 3/0xf0000081, 1/uts: 3/0xeffffffe, 2/ipc: 3/0xefffffff, 3/pid: 3/0xeffffffc, 4/user: 3/0xeffffffd, 5/mnt: 3/0xf0000000, 6/cgroup: 3/0xeffffffb] 0x1151e0 [0x30]: event: 9 . . ... raw event: size 48 bytes . 0000: 09 00 00 00 02 00 30 00 c4 71 82 68 0c 7f 00 00 ......0..q.h.... . 0010: a9 39 00 00 a9 39 00 00 94 28 fe 63 d8 01 00 00 .9...9...(.c.... . 0020: 03 00 00 00 00 00 00 00 ce c4 02 00 00 00 00 00 ................ <SNIP> NAMESPACES events: 1 <SNIP> # Signed-off-by: Hari Bathini <hbathini@linux.vnet.ibm.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alexei Starovoitov <ast@fb.com> Cc: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com> Cc: Aravinda Prasad <aravinda@linux.vnet.ibm.com> Cc: Brendan Gregg <brendan.d.gregg@gmail.com> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: Eric Biederman <ebiederm@xmission.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Sargun Dhillon <sargun@sargun.me> Cc: Steven Rostedt <rostedt@goodmis.org> Link: http://lkml.kernel.org/r/148891930386.25309.18412039920746995488.stgit@hbathini.in.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-03-08 04:41:43 +08:00
.namespaces = perf_event__process_namespaces,
.lost = perf_event__process_lost,
.fork = perf_sched__process_fork_event,
.ordered_events = true,
},
.cmp_pid = LIST_HEAD_INIT(sched.cmp_pid),
.sort_list = LIST_HEAD_INIT(sched.sort_list),
.start_work_mutex = PTHREAD_MUTEX_INITIALIZER,
.work_done_wait_mutex = PTHREAD_MUTEX_INITIALIZER,
.sort_order = default_sort_order,
.replay_repeat = 10,
.profile_cpu = -1,
.next_shortname1 = 'A',
.next_shortname2 = '0',
perf sched: Add option to merge like comms to lat output Sometimes when debugging large multi-threaded applications it is helpful to collate all of the latency numbers into one bulk record to get an idea of what is going on. This patch does this by merging any entries that belong to the same comm into one entry and then spits out those totals. I've also slightly changed the output so you can see how many threads were merged in the processing. Here is the new default output format ----------------------------------------------------------------------------------------------------------- Task | Runtime ms | Switches | Average delay ms | Maximum delay ms | Maximum delay at | ----------------------------------------------------------------------------------------------------------- chrome:(23) | 740.878 ms | 2612 | avg: 0.022 ms | max: 0.845 ms | max at: 7935.254223 s pulseaudio:1523 | 94.440 ms | 597 | avg: 0.027 ms | max: 0.110 ms | max at: 7934.668372 s threaded-ml:6042 | 72.554 ms | 386 | avg: 0.035 ms | max: 1.186 ms | max at: 7935.330911 s Chrome_IOThread:3832 | 52.388 ms | 456 | avg: 0.021 ms | max: 1.365 ms | max at: 7935.330602 s Chrome_ChildIOT:(7) | 50.694 ms | 743 | avg: 0.021 ms | max: 1.448 ms | max at: 7935.256659 s Compositor:5510 | 30.012 ms | 192 | avg: 0.019 ms | max: 0.131 ms | max at: 7936.636815 s plugin_audio_th:6043 | 24.828 ms | 314 | avg: 0.018 ms | max: 0.143 ms | max at: 7936.205994 s CompositorTileW:(2) | 14.099 ms | 45 | avg: 0.022 ms | max: 0.153 ms | max at: 7937.521800 s the (#) after the task is the number of tasks merged, and then if there were no tasks merged it just shows the pid. Here is the same trace file with the -p option to print the per-pid latency numbers ----------------------------------------------------------------------------------------------------------- Task | Runtime ms | Switches | Average delay ms | Maximum delay ms | Maximum delay at | ----------------------------------------------------------------------------------------------------------- chrome:5500 | 386.872 ms | 387 | avg: 0.023 ms | max: 0.241 ms | max at: 7936.001694 s pulseaudio:1523 | 94.440 ms | 597 | avg: 0.027 ms | max: 0.110 ms | max at: 7934.668372 s threaded-ml:6042 | 72.554 ms | 386 | avg: 0.035 ms | max: 1.186 ms | max at: 7935.330911 s chrome:10226 | 69.710 ms | 251 | avg: 0.023 ms | max: 0.764 ms | max at: 7935.992305 s chrome:4267 | 64.551 ms | 418 | avg: 0.021 ms | max: 0.294 ms | max at: 7937.862427 s chrome:4827 | 62.268 ms | 54 | avg: 0.029 ms | max: 0.666 ms | max at: 7935.992813 s Chrome_IOThread:3832 | 52.388 ms | 456 | avg: 0.021 ms | max: 1.365 ms | max at: 7935.330602 s chrome:3776 | 46.150 ms | 349 | avg: 0.023 ms | max: 0.845 ms | max at: 7935.254223 s Signed-off-by: Josef Bacik <jbacik@fb.com> Acked-by: Ingo Molnar <mingo@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: kernel-team@fb.com Link: http://lkml.kernel.org/r/1432300720-30478-1-git-send-email-jbacik@fb.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-05-22 21:18:40 +08:00
.skip_merge = 0,
perf sched timehist: Add call graph options If callchains were recorded they are appended to the line with a default stack depth of 5: 1.874569 [0011] gcc[31949] 0.014 0.000 1.148 wait_for_completion_killable <- do_fork <- sys_vfork <- stub_vfork <- __vfork 1.874591 [0010] gcc[31951] 0.000 0.000 0.024 __cond_resched <- _cond_resched <- wait_for_completion <- stop_one_cpu <- sched_exec 1.874603 [0010] migration/10[59] 3.350 0.004 0.011 smpboot_thread_fn <- kthread <- ret_from_fork 1.874604 [0011] <idle> 1.148 0.000 0.035 cpu_startup_entry <- start_secondary 1.874723 [0005] <idle> 0.016 0.000 1.383 cpu_startup_entry <- start_secondary 1.874746 [0005] gcc[31949] 0.153 0.078 0.022 do_wait sys_wait4 <- system_call_fastpath <- __GI___waitpid --no-call-graph can be used to not show the callchains. --max-stack is used to control the number of frames shown (default of 5). -x/--excl options can be used to collapse redundant callchains to get more relevant data on screen. Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Ingo Molnar <mingo@kernel.org> Acked-by: Jiri Olsa <jolsa@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/20161116060634.28477-7-namhyung@kernel.org [ Add documentation based on above commit message ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-11-16 14:06:32 +08:00
.show_callchain = 1,
.max_stack = 5,
};
const struct option sched_options[] = {
OPT_STRING('i', "input", &input_name, "file",
"input file name"),
OPT_INCR('v', "verbose", &verbose,
"be more verbose (show symbol address, etc)"),
OPT_BOOLEAN('D', "dump-raw-trace", &dump_trace,
"dump raw trace in ASCII"),
OPT_BOOLEAN('f', "force", &sched.force, "don't complain, do it"),
OPT_END()
};
const struct option latency_options[] = {
OPT_STRING('s', "sort", &sched.sort_order, "key[,key2...]",
"sort by key(s): runtime, switch, avg, max"),
OPT_INTEGER('C', "CPU", &sched.profile_cpu,
"CPU to profile on"),
perf sched: Add option to merge like comms to lat output Sometimes when debugging large multi-threaded applications it is helpful to collate all of the latency numbers into one bulk record to get an idea of what is going on. This patch does this by merging any entries that belong to the same comm into one entry and then spits out those totals. I've also slightly changed the output so you can see how many threads were merged in the processing. Here is the new default output format ----------------------------------------------------------------------------------------------------------- Task | Runtime ms | Switches | Average delay ms | Maximum delay ms | Maximum delay at | ----------------------------------------------------------------------------------------------------------- chrome:(23) | 740.878 ms | 2612 | avg: 0.022 ms | max: 0.845 ms | max at: 7935.254223 s pulseaudio:1523 | 94.440 ms | 597 | avg: 0.027 ms | max: 0.110 ms | max at: 7934.668372 s threaded-ml:6042 | 72.554 ms | 386 | avg: 0.035 ms | max: 1.186 ms | max at: 7935.330911 s Chrome_IOThread:3832 | 52.388 ms | 456 | avg: 0.021 ms | max: 1.365 ms | max at: 7935.330602 s Chrome_ChildIOT:(7) | 50.694 ms | 743 | avg: 0.021 ms | max: 1.448 ms | max at: 7935.256659 s Compositor:5510 | 30.012 ms | 192 | avg: 0.019 ms | max: 0.131 ms | max at: 7936.636815 s plugin_audio_th:6043 | 24.828 ms | 314 | avg: 0.018 ms | max: 0.143 ms | max at: 7936.205994 s CompositorTileW:(2) | 14.099 ms | 45 | avg: 0.022 ms | max: 0.153 ms | max at: 7937.521800 s the (#) after the task is the number of tasks merged, and then if there were no tasks merged it just shows the pid. Here is the same trace file with the -p option to print the per-pid latency numbers ----------------------------------------------------------------------------------------------------------- Task | Runtime ms | Switches | Average delay ms | Maximum delay ms | Maximum delay at | ----------------------------------------------------------------------------------------------------------- chrome:5500 | 386.872 ms | 387 | avg: 0.023 ms | max: 0.241 ms | max at: 7936.001694 s pulseaudio:1523 | 94.440 ms | 597 | avg: 0.027 ms | max: 0.110 ms | max at: 7934.668372 s threaded-ml:6042 | 72.554 ms | 386 | avg: 0.035 ms | max: 1.186 ms | max at: 7935.330911 s chrome:10226 | 69.710 ms | 251 | avg: 0.023 ms | max: 0.764 ms | max at: 7935.992305 s chrome:4267 | 64.551 ms | 418 | avg: 0.021 ms | max: 0.294 ms | max at: 7937.862427 s chrome:4827 | 62.268 ms | 54 | avg: 0.029 ms | max: 0.666 ms | max at: 7935.992813 s Chrome_IOThread:3832 | 52.388 ms | 456 | avg: 0.021 ms | max: 1.365 ms | max at: 7935.330602 s chrome:3776 | 46.150 ms | 349 | avg: 0.023 ms | max: 0.845 ms | max at: 7935.254223 s Signed-off-by: Josef Bacik <jbacik@fb.com> Acked-by: Ingo Molnar <mingo@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: kernel-team@fb.com Link: http://lkml.kernel.org/r/1432300720-30478-1-git-send-email-jbacik@fb.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-05-22 21:18:40 +08:00
OPT_BOOLEAN('p', "pids", &sched.skip_merge,
"latency stats per pid instead of per comm"),
OPT_PARENT(sched_options)
};
const struct option replay_options[] = {
OPT_UINTEGER('r', "repeat", &sched.replay_repeat,
"repeat the workload replay N times (-1: infinite)"),
OPT_PARENT(sched_options)
};
const struct option map_options[] = {
OPT_BOOLEAN(0, "compact", &sched.map.comp,
"map output in compact mode"),
OPT_STRING(0, "color-pids", &sched.map.color_pids_str, "pids",
"highlight given pids in map"),
OPT_STRING(0, "color-cpus", &sched.map.color_cpus_str, "cpus",
"highlight given CPUs in map"),
OPT_STRING(0, "cpus", &sched.map.cpus_str, "cpus",
"display given CPUs in map"),
OPT_PARENT(sched_options)
};
const struct option timehist_options[] = {
OPT_STRING('k', "vmlinux", &symbol_conf.vmlinux_name,
"file", "vmlinux pathname"),
OPT_STRING(0, "kallsyms", &symbol_conf.kallsyms_name,
"file", "kallsyms pathname"),
perf sched timehist: Add call graph options If callchains were recorded they are appended to the line with a default stack depth of 5: 1.874569 [0011] gcc[31949] 0.014 0.000 1.148 wait_for_completion_killable <- do_fork <- sys_vfork <- stub_vfork <- __vfork 1.874591 [0010] gcc[31951] 0.000 0.000 0.024 __cond_resched <- _cond_resched <- wait_for_completion <- stop_one_cpu <- sched_exec 1.874603 [0010] migration/10[59] 3.350 0.004 0.011 smpboot_thread_fn <- kthread <- ret_from_fork 1.874604 [0011] <idle> 1.148 0.000 0.035 cpu_startup_entry <- start_secondary 1.874723 [0005] <idle> 0.016 0.000 1.383 cpu_startup_entry <- start_secondary 1.874746 [0005] gcc[31949] 0.153 0.078 0.022 do_wait sys_wait4 <- system_call_fastpath <- __GI___waitpid --no-call-graph can be used to not show the callchains. --max-stack is used to control the number of frames shown (default of 5). -x/--excl options can be used to collapse redundant callchains to get more relevant data on screen. Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Ingo Molnar <mingo@kernel.org> Acked-by: Jiri Olsa <jolsa@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/20161116060634.28477-7-namhyung@kernel.org [ Add documentation based on above commit message ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-11-16 14:06:32 +08:00
OPT_BOOLEAN('g', "call-graph", &sched.show_callchain,
"Display call chains if present (default on)"),
OPT_UINTEGER(0, "max-stack", &sched.max_stack,
"Maximum number of functions to display backtrace."),
OPT_STRING(0, "symfs", &symbol_conf.symfs, "directory",
"Look for files with symbols relative to this directory"),
perf sched timehist: Add summary options The -s/--summary option is to show process runtime statistics. And the -S/--with-summary option is to show the stats with the normal output. $ perf sched timehist -s Runtime summary comm parent sched-in run-time min-run avg-run max-run stddev (count) (msec) (msec) (msec) (msec) % --------------------------------------------------------------------------------------------------------- ksoftirqd/0[3] 2 2 0.011 0.004 0.005 0.006 14.87 rcu_preempt[7] 2 11 0.071 0.002 0.006 0.017 20.23 watchdog/0[11] 2 1 0.002 0.002 0.002 0.002 0.00 watchdog/1[12] 2 1 0.004 0.004 0.004 0.004 0.00 ... Terminated tasks: sleep[7220] 7219 3 0.770 0.087 0.256 0.576 62.28 Idle stats: CPU 0 idle for 2352.006 msec CPU 1 idle for 2764.497 msec CPU 2 idle for 2998.229 msec CPU 3 idle for 2967.800 msec Total number of unique tasks: 52 Total number of context switches: 2532 Total run time (msec): 218.036 Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Ingo Molnar <mingo@kernel.org> Acked-by: Jiri Olsa <jolsa@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/20161116060634.28477-5-namhyung@kernel.org [ Add documentation from last commit, so that docs comes with the cset that introduces the feature ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-11-16 14:06:30 +08:00
OPT_BOOLEAN('s', "summary", &sched.summary_only,
"Show only syscall summary with statistics"),
OPT_BOOLEAN('S', "with-summary", &sched.summary,
"Show all syscalls and summary with statistics"),
OPT_BOOLEAN('w', "wakeups", &sched.show_wakeups, "Show wakeup events"),
OPT_BOOLEAN('n', "next", &sched.show_next, "Show next task"),
OPT_BOOLEAN('M', "migrations", &sched.show_migrations, "Show migration events"),
OPT_BOOLEAN('V', "cpu-visual", &sched.show_cpu_visual, "Add CPU visual"),
perf sched timehist: Add -I/--idle-hist option The --idle-hist option is to analyze system idle state so which process makes cpu to go idle. If this option is specified, non-idle events will be skipped and processes switching to/from idle will be shown. This option is mostly useful when used with --summary(-only) option. In the idle-time summary view, idle time is accounted to previous thread which is run before idle task. The example output looks like following: Idle-time summary comm parent sched-out idle-time min-idle avg-idle max-idle stddev migrations (count) (msec) (msec) (msec) (msec) % -------------------------------------------------------------------------------------------- rcu_preempt[7] 2 95 550.872 0.011 5.798 23.146 7.63 0 migration/1[16] 2 1 15.558 15.558 15.558 15.558 0.00 0 khugepaged[39] 2 1 3.062 3.062 3.062 3.062 0.00 0 kworker/0:1H[124] 2 2 4.728 0.611 2.364 4.116 74.12 0 systemd-journal[167] 1 1 4.510 4.510 4.510 4.510 0.00 0 kworker/u16:3[558] 2 13 74.737 0.080 5.749 12.960 21.96 0 irq/34-iwlwifi[628] 2 21 118.403 0.032 5.638 23.990 24.00 0 kworker/u17:0[673] 2 1 3.523 3.523 3.523 3.523 0.00 0 dbus-daemon[722] 1 1 6.743 6.743 6.743 6.743 0.00 0 ifplugd[741] 1 1 58.826 58.826 58.826 58.826 0.00 0 wpa_supplicant[1490] 1 1 13.302 13.302 13.302 13.302 0.00 0 wpa_actiond[1492] 1 2 4.064 0.168 2.032 3.896 91.72 0 dockerd[1500] 1 1 0.055 0.055 0.055 0.055 0.00 0 ... Signed-off-by: Namhyung Kim <namhyung@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Acked-by: David Ahern <dsahern@gmail.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20161208144755.16673-6-namhyung@kernel.org Link: http://lkml.kernel.org/r/20161213080632.19099-2-namhyung@kernel.org [ Merged fix sent by Namhyumg, as posted in the second Link: tag ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-12-08 22:47:54 +08:00
OPT_BOOLEAN('I', "idle-hist", &sched.idle_hist, "Show idle events only"),
perf sched timehist: Add option to specify time window of interest Add option to allow user to control analysis window. e.g., collect data for time window and analyze a segment of interest within that window. Committer notes: Testing it: # perf sched record -a usleep 1 [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 1.593 MB perf.data (25 samples) ] # # perf sched timehist | head -18 Samples do not have callchains. time cpu task name wait time sch delay run time [tid/pid] (msec) (msec) (msec) ------------- ------ --------------- --------- --------- -------- 19818.635579 [0002] <idle> 0.000 0.000 0.000 19818.635613 [0000] perf[9116] 0.000 0.000 0.000 19818.635676 [0000] <idle> 0.000 0.000 0.063 19818.635678 [0000] rcuos/2[29] 0.000 0.002 0.001 19818.635696 [0002] perf[9117] 0.000 0.004 0.116 19818.635702 [0000] <idle> 0.001 0.000 0.024 19818.635709 [0002] migration/2[25] 0.000 0.003 0.012 19818.636263 [0000] usleep[9117] 0.005 0.000 0.560 19818.636316 [0000] <idle> 0.560 0.000 0.053 19818.636358 [0002] <idle> 0.129 0.000 0.649 19818.636358 [0000] usleep[9117] 0.053 0.002 0.042 # # perf sched timehist --time 19818.635696, Samples do not have callchains. time cpu task name wait time sch delay run time [tid/pid] (msec) (msec) (msec) ------------- ------ --------------- -------- --------- --------- 19818.635696 [0002] perf[9117] 0.000 0.120 0.000 19818.635702 [0000] <idle> 0.019 0.000 0.006 19818.635709 [0002] migration/2[25] 0.000 0.003 0.012 19818.636263 [0000] usleep[9117] 0.005 0.000 0.560 19818.636316 [0000] <idle> 0.560 0.000 0.053 19818.636358 [0002] <idle> 0.129 0.000 0.649 19818.636358 [0000] usleep[9117] 0.053 0.002 0.042 # # perf sched timehist --time 19818.635696,19818.635709 Samples do not have callchains. time cpu task name wait time sch delay run time [tid/pid] (msec) (msec) (msec) ------------- ------ --------------- --------- --------- --------- 19818.635696 [0002] perf[9117] 0.000 0.120 0.000 19818.635702 [0000] <idle> 0.019 0.000 0.006 19818.635709 [0002] migration/2[25] 0.000 0.003 0.012 19818.635709 [0000] usleep[9117] 0.005 0.000 0.006 # Signed-off-by: David Ahern <dsahern@gmail.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Acked-by: Namhyung Kim <namhyung@kernel.org> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1480439746-42695-5-git-send-email-dsahern@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-11-30 01:15:44 +08:00
OPT_STRING(0, "time", &sched.time_str, "str",
"Time span for analysis (start,stop)"),
OPT_BOOLEAN(0, "state", &sched.show_state, "Show task state when sched-out"),
OPT_STRING('p', "pid", &symbol_conf.pid_list_str, "pid[,pid...]",
"analyze events only for given process id(s)"),
OPT_STRING('t', "tid", &symbol_conf.tid_list_str, "tid[,tid...]",
"analyze events only for given thread id(s)"),
OPT_PARENT(sched_options)
};
const char * const latency_usage[] = {
"perf sched latency [<options>]",
NULL
};
const char * const replay_usage[] = {
"perf sched replay [<options>]",
NULL
};
const char * const map_usage[] = {
"perf sched map [<options>]",
NULL
};
const char * const timehist_usage[] = {
"perf sched timehist [<options>]",
NULL
};
const char *const sched_subcommands[] = { "record", "latency", "map",
"replay", "script",
"timehist", NULL };
const char *sched_usage[] = {
NULL,
NULL
};
struct trace_sched_handler lat_ops = {
.wakeup_event = latency_wakeup_event,
.switch_event = latency_switch_event,
.runtime_event = latency_runtime_event,
.migrate_task_event = latency_migrate_task_event,
};
struct trace_sched_handler map_ops = {
.switch_event = map_switch_event,
};
struct trace_sched_handler replay_ops = {
.wakeup_event = replay_wakeup_event,
.switch_event = replay_switch_event,
.fork_event = replay_fork_event,
};
unsigned int i;
for (i = 0; i < ARRAY_SIZE(sched.curr_pid); i++)
sched.curr_pid[i] = -1;
argc = parse_options_subcommand(argc, argv, sched_options, sched_subcommands,
sched_usage, PARSE_OPT_STOP_AT_NON_OPTION);
if (!argc)
usage_with_options(sched_usage, sched_options);
/*
* Aliased to 'perf script' for now:
*/
if (!strcmp(argv[0], "script"))
return cmd_script(argc, argv);
if (!strncmp(argv[0], "rec", 3)) {
return __cmd_record(argc, argv);
} else if (!strncmp(argv[0], "lat", 3)) {
sched.tp_handler = &lat_ops;
if (argc > 1) {
argc = parse_options(argc, argv, latency_options, latency_usage, 0);
if (argc)
usage_with_options(latency_usage, latency_options);
}
setup_sorting(&sched, latency_options, latency_usage);
return perf_sched__lat(&sched);
perf sched: Add 'perf sched map' scheduling event map printout This prints a textual context-switching outline of workload captured via perf sched record. For example, on a 16 CPU box it outputs: N1 O1 . . . S1 . . . B0 . *I0 C1 . M1 . 23002.773423 secs N1 O1 . *Q0 . S1 . . . B0 . I0 C1 . M1 . 23002.773423 secs N1 O1 . Q0 . S1 . . . B0 . *R1 C1 . M1 . 23002.773485 secs N1 O1 . Q0 . S1 . *S0 . B0 . R1 C1 . M1 . 23002.773478 secs *L0 O1 . Q0 . S1 . S0 . B0 . R1 C1 . M1 . 23002.773523 secs L0 O1 . *. . S1 . S0 . B0 . R1 C1 . M1 . 23002.773531 secs L0 O1 . . . S1 . S0 . B0 . R1 C1 *T1 M1 . 23002.773547 secs T1 => irqbalance:2089 L0 O1 . . . S1 . S0 . *P0 . R1 C1 T1 M1 . 23002.773549 secs *N1 O1 . . . S1 . S0 . P0 . R1 C1 T1 M1 . 23002.773566 secs N1 O1 . . . *J0 . S0 . P0 . R1 C1 T1 M1 . 23002.773571 secs N1 O1 . . . J0 . S0 *B0 P0 . R1 C1 T1 M1 . 23002.773592 secs N1 O1 . . . J0 . *U0 B0 P0 . R1 C1 T1 M1 . 23002.773582 secs N1 O1 . . . *S1 . U0 B0 P0 . R1 C1 T1 M1 . 23002.773604 secs N1 O1 . . . S1 . U0 B0 *. . R1 C1 T1 M1 . 23002.773615 secs N1 O1 . . . S1 . U0 B0 . . *K0 C1 T1 M1 . 23002.773631 secs N1 O1 . *M0 . S1 . U0 B0 . . K0 C1 T1 M1 . 23002.773624 secs N1 O1 . M0 . S1 . U0 *. . . K0 C1 T1 M1 . 23002.773644 secs N1 O1 . M0 . S1 . U0 . . . *R1 C1 T1 M1 . 23002.773662 secs N1 O1 . M0 . S1 . *. . . . R1 C1 T1 M1 . 23002.773648 secs N1 O1 . *. . S1 . . . . . R1 C1 T1 M1 . 23002.773680 secs N1 O1 . . . *L0 . . . . . R1 C1 T1 M1 . 23002.773717 secs *N0 O1 . . . L0 . . . . . R1 C1 T1 M1 . 23002.773709 secs *N1 O1 . . . L0 . . . . . R1 C1 T1 M1 . 23002.773747 secs Columns stand for individual CPUs, from CPU0 to CPU15, and the two-letter shortcuts stand for tasks that are running on a CPU. '*' denotes the CPU that had the event. A dot signals an idle CPU. New tasks are assigned new two-letter shortcuts - when they occur first they are printed. In the above example 'T1' stood for irqbalance: T1 => irqbalance:2089 Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-16 23:40:48 +08:00
} else if (!strcmp(argv[0], "map")) {
if (argc) {
argc = parse_options(argc, argv, map_options, map_usage, 0);
if (argc)
usage_with_options(map_usage, map_options);
}
sched.tp_handler = &map_ops;
setup_sorting(&sched, latency_options, latency_usage);
return perf_sched__map(&sched);
} else if (!strncmp(argv[0], "rep", 3)) {
sched.tp_handler = &replay_ops;
if (argc) {
argc = parse_options(argc, argv, replay_options, replay_usage, 0);
if (argc)
usage_with_options(replay_usage, replay_options);
}
return perf_sched__replay(&sched);
} else if (!strcmp(argv[0], "timehist")) {
if (argc) {
argc = parse_options(argc, argv, timehist_options,
timehist_usage, 0);
if (argc)
usage_with_options(timehist_usage, timehist_options);
}
if ((sched.show_wakeups || sched.show_next) &&
sched.summary_only) {
pr_err(" Error: -s and -[n|w] are mutually exclusive.\n");
parse_options_usage(timehist_usage, timehist_options, "s", true);
if (sched.show_wakeups)
parse_options_usage(NULL, timehist_options, "w", true);
if (sched.show_next)
parse_options_usage(NULL, timehist_options, "n", true);
return -EINVAL;
}
return perf_sched__timehist(&sched);
} else {
usage_with_options(sched_usage, sched_options);
}
return 0;
}