UbiquitousOS
/
OpenCloudOS-Kernel
mirror of https://gitee.com/OpenCloudOS/OpenCloudOS-Kernel.git
11
0
Fork 0
Code Issues Projects Releases Wiki Activity
OpenCloudOS-Kernel/arch/m68k/include/asm/m54xxsim.h

81 lines
2.3 KiB
C
Raw Normal View History

m68knommu: add basic mmu-less m548x support Add a very basic mmu-less support for coldfire m548x family. This is perhaps also valid for m547x family. The port comprises the serial, tick timer and reboot support. The gpio part compiles but is empty. This gives a functional albeit limited linux for the m548x coldfire family. This has been tested on a Freescale M548xEVB Lite board with a M5484 processor and the default dbug monitor. Signed-off-by: Philippe De Muyter <phdm@macqel.be> Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2010-09-20 19:11:11 +08:00
/*
m68knommu: make Coldfire 548x support more generic The ColdFire 547x family of processors is very similar to the ColdFire 548x series. Almost all of the support for them is the same. Make the code supporting the 548x more gneric, so it will be capable of supporting both families. For the most part this is a renaming excerise to make the support code more obviously apply to both families. Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2010-11-02 10:05:29 +08:00
* m54xxsim.h -- ColdFire 547x/548x System Integration Unit support.
m68knommu: add basic mmu-less m548x support Add a very basic mmu-less support for coldfire m548x family. This is perhaps also valid for m547x family. The port comprises the serial, tick timer and reboot support. The gpio part compiles but is empty. This gives a functional albeit limited linux for the m548x coldfire family. This has been tested on a Freescale M548xEVB Lite board with a M5484 processor and the default dbug monitor. Signed-off-by: Philippe De Muyter <phdm@macqel.be> Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2010-09-20 19:11:11 +08:00
*/
m68knommu: make Coldfire 548x support more generic The ColdFire 547x family of processors is very similar to the ColdFire 548x series. Almost all of the support for them is the same. Make the code supporting the 548x more gneric, so it will be capable of supporting both families. For the most part this is a renaming excerise to make the support code more obviously apply to both families. Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2010-11-02 10:05:29 +08:00
#ifndef m54xxsim_h
#define m54xxsim_h
m68knommu: add basic mmu-less m548x support Add a very basic mmu-less support for coldfire m548x family. This is perhaps also valid for m547x family. The port comprises the serial, tick timer and reboot support. The gpio part compiles but is empty. This gives a functional albeit limited linux for the m548x coldfire family. This has been tested on a Freescale M548xEVB Lite board with a M5484 processor and the default dbug monitor. Signed-off-by: Philippe De Muyter <phdm@macqel.be> Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2010-09-20 19:11:11 +08:00
m68knommu: fix clock rate value reported for ColdFire 54xx parts The instruction timings of the ColdFire 54xx family parts are different to other version 4 parts (or version 2 or 3 parts for that matter too). Move the instruction timing setting into the ColdFire part specific headers, and set the 54xx value appropriately. Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2010-11-02 15:40:37 +08:00
#define CPU_NAME "COLDFIRE(m54xx)"
#define CPU_INSTR_PER_JIFFY 2
m68knommu: remove ColdFire CLOCK_DIV config option The reality is that you do not need the abiltity to configure the clock divider for ColdFire CPUs. It is a fixed ratio on any given ColdFire family member. It is not the same for all ColdFire parts, but it is always the same in a model range. So hard define the divider for each supported ColdFire CPU type and remove the Kconfig option. Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2011-03-09 12:19:08 +08:00
#define MCF_BUSCLK (MCF_CLK / 2)
m68knommu: move ColdFire CPU names into their headers Move the ColdFire CPU names out of setup.c and into their repsective headers. That way when we add new ones we won't need to modify setup.c any more. Add the missing 548x CPU name. Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2010-11-02 15:13:27 +08:00
m68knommu: move inclusion of ColdFire v4 cache registers Move the inclusion of the version 4 cache controller registers so that it is with all the other register bit flag definitions. This makes it consistent with the other version core inclusion points, and means we don't need "#ifdef"ery in odd-ball places for these definitions. Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2010-11-09 08:40:44 +08:00
#include <asm/m54xxacr.h>
m68knommu: fix clock rate value reported for ColdFire 54xx parts The instruction timings of the ColdFire 54xx family parts are different to other version 4 parts (or version 2 or 3 parts for that matter too). Move the instruction timing setting into the ColdFire part specific headers, and set the 54xx value appropriately. Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2010-11-02 15:40:37 +08:00
#define MCFINT_VECBASE 64
m68knommu: add basic mmu-less m548x support Add a very basic mmu-less support for coldfire m548x family. This is perhaps also valid for m547x family. The port comprises the serial, tick timer and reboot support. The gpio part compiles but is empty. This gives a functional albeit limited linux for the m548x coldfire family. This has been tested on a Freescale M548xEVB Lite board with a M5484 processor and the default dbug monitor. Signed-off-by: Philippe De Muyter <phdm@macqel.be> Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2010-09-20 19:11:11 +08:00
/*
* Interrupt Controller Registers
*/
m68knommu: remove kludge seting of MCF_IPSBAR for ColdFire 54xx The ColdFire 54xx family shares the same interrupt controller used on the 523x, 527x and 528x ColdFire parts, but it isn't offset relative to the IPSBAR register. The 54xx doesn't have an IPSBAR register. By including the base address of the peripheral registers in the register definitions (MCFICM_INTC0 and MCFICM_INTC1 in this case) we can avoid having to define a fake IPSBAR for the 54xx. And this makes the register address definitions of these more consistent, the majority of the other register address defines include the peripheral base address already. Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2011-03-05 20:17:17 +08:00
#define MCFICM_INTC0 (MCF_MBAR + 0x700) /* Base for Interrupt Ctrl 0 */
m68knommu: add basic mmu-less m548x support Add a very basic mmu-less support for coldfire m548x family. This is perhaps also valid for m547x family. The port comprises the serial, tick timer and reboot support. The gpio part compiles but is empty. This gives a functional albeit limited linux for the m548x coldfire family. This has been tested on a Freescale M548xEVB Lite board with a M5484 processor and the default dbug monitor. Signed-off-by: Philippe De Muyter <phdm@macqel.be> Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2010-09-20 19:11:11 +08:00
#define MCFINTC_IPRH 0x00 /* Interrupt pending 32-63 */
#define MCFINTC_IPRL 0x04 /* Interrupt pending 1-31 */
#define MCFINTC_IMRH 0x08 /* Interrupt mask 32-63 */
#define MCFINTC_IMRL 0x0c /* Interrupt mask 1-31 */
#define MCFINTC_INTFRCH 0x10 /* Interrupt force 32-63 */
#define MCFINTC_INTFRCL 0x14 /* Interrupt force 1-31 */
#define MCFINTC_IRLR 0x18 /* */
#define MCFINTC_IACKL 0x19 /* */
#define MCFINTC_ICR0 0x40 /* Base ICR register */
m68knommu: move UART addressing to part specific includes The ColdFire UART base addresses varies between the different ColdFire family members. Instead of keeping the base addresses with the UART definitions keep them with the other addresses definitions for each ColdFire part. The motivation for this move is so that when we add new ColdFire part definitions, they are all in a single file (and we shouldn't normally need to modify the UART definitions in mcfuart.h at all). Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2010-11-03 10:50:30 +08:00
/*
* UART module.
*/
#define MCFUART_BASE1 0x8600 /* Base address of UART1 */
#define MCFUART_BASE2 0x8700 /* Base address of UART2 */
#define MCFUART_BASE3 0x8800 /* Base address of UART3 */
#define MCFUART_BASE4 0x8900 /* Base address of UART4 */
m68knommu: add basic mmu-less m548x support Add a very basic mmu-less support for coldfire m548x family. This is perhaps also valid for m547x family. The port comprises the serial, tick timer and reboot support. The gpio part compiles but is empty. This gives a functional albeit limited linux for the m548x coldfire family. This has been tested on a Freescale M548xEVB Lite board with a M5484 processor and the default dbug monitor. Signed-off-by: Philippe De Muyter <phdm@macqel.be> Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2010-09-20 19:11:11 +08:00
/*
* Define system peripheral IRQ usage.
*/
#define MCF_IRQ_TIMER (64 + 54) /* Slice Timer 0 */
#define MCF_IRQ_PROFILER (64 + 53) /* Slice Timer 1 */
/*
* Generic GPIO support
*/
#define MCFGPIO_PIN_MAX 0 /* I am too lazy to count */
#define MCFGPIO_IRQ_MAX -1
#define MCFGPIO_IRQ_VECBASE -1
m68knommu: external interrupt support to ColdFire intc-2 controller The EDGE Port module of some ColdFire parts using the intc-2 interrupt controller provides support for 7 external interrupts. These interrupts go off-chip (that is they are not for internal peripherals). They need some special handling and have some extra setup registers. Add code to support them. Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2011-03-11 15:06:58 +08:00
/*
* EDGE Port support.
*/
#define MCFEPORT_EPPAR (MCF_MBAR + 0xf00) /* Pin assignment */
#define MCFEPORT_EPDDR (MCF_MBAR + 0xf04) /* Data direction */
#define MCFEPORT_EPIER (MCF_MBAR + 0xf05) /* Interrupt enable */
#define MCFEPORT_EPDR (MCF_MBAR + 0xf08) /* Port data (w) */
#define MCFEPORT_EPPDR (MCF_MBAR + 0xf09) /* Port data (r) */
#define MCFEPORT_EPFR (MCF_MBAR + 0xf0c) /* Flags */
m68knommu: add basic mmu-less m548x support Add a very basic mmu-less support for coldfire m548x family. This is perhaps also valid for m547x family. The port comprises the serial, tick timer and reboot support. The gpio part compiles but is empty. This gives a functional albeit limited linux for the m548x coldfire family. This has been tested on a Freescale M548xEVB Lite board with a M5484 processor and the default dbug monitor. Signed-off-by: Philippe De Muyter <phdm@macqel.be> Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2010-09-20 19:11:11 +08:00
/*
* Some PSC related definitions
*/
#define MCF_PAR_PSC(x) (0x000A4F-((x)&0x3))
#define MCF_PAR_SDA (0x0008)
#define MCF_PAR_SCL (0x0004)
#define MCF_PAR_PSC_TXD (0x04)
#define MCF_PAR_PSC_RXD (0x08)
#define MCF_PAR_PSC_RTS(x) (((x)&0x03)<<4)
#define MCF_PAR_PSC_CTS(x) (((x)&0x03)<<6)
#define MCF_PAR_PSC_CTS_GPIO (0x00)
#define MCF_PAR_PSC_CTS_BCLK (0x80)
#define MCF_PAR_PSC_CTS_CTS (0xC0)
#define MCF_PAR_PSC_RTS_GPIO (0x00)
#define MCF_PAR_PSC_RTS_FSYNC (0x20)
#define MCF_PAR_PSC_RTS_RTS (0x30)
#define MCF_PAR_PSC_CANRX (0x40)
m68knommu: make Coldfire 548x support more generic The ColdFire 547x family of processors is very similar to the ColdFire 548x series. Almost all of the support for them is the same. Make the code supporting the 548x more gneric, so it will be capable of supporting both families. For the most part this is a renaming excerise to make the support code more obviously apply to both families. Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2010-11-02 10:05:29 +08:00
#endif /* m54xxsim_h */