UbiquitousOS
/
OpenCloudOS-Kernel
mirror of https://gitee.com/OpenCloudOS/OpenCloudOS-Kernel.git
11
0
Fork 0
Code Issues Projects Releases Wiki Activity
OpenCloudOS-Kernel/drivers/cpufreq/longhaul.h

354 lines
8.5 KiB
C
Raw Normal View History

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
/*
* longhaul.h
* (C) 2003 Dave Jones.
*
* Licensed under the terms of the GNU GPL License version 2.
*
* VIA-specific information
*/
union msr_bcr2 {
struct {
unsigned Reseved:19, // 18:0
ESOFTBF:1, // 19
Reserved2:3, // 22:20
CLOCKMUL:4, // 26:23
Reserved3:5; // 31:27
} bits;
unsigned long val;
};
union msr_longhaul {
struct {
unsigned RevisionID:4, // 3:0
RevisionKey:4, // 7:4
EnableSoftBusRatio:1, // 8
EnableSoftVID:1, // 9
EnableSoftBSEL:1, // 10
Reserved:3, // 11:13
SoftBusRatio4:1, // 14
VRMRev:1, // 15
SoftBusRatio:4, // 19:16
SoftVID:5, // 24:20
Reserved2:3, // 27:25
SoftBSEL:2, // 29:28
Reserved3:2, // 31:30
MaxMHzBR:4, // 35:32
MaximumVID:5, // 40:36
MaxMHzFSB:2, // 42:41
MaxMHzBR4:1, // 43
Reserved4:4, // 47:44
MinMHzBR:4, // 51:48
MinimumVID:5, // 56:52
MinMHzFSB:2, // 58:57
MinMHzBR4:1, // 59
Reserved5:4; // 63:60
} bits;
unsigned long long val;
};
/*
* Clock ratio tables. Div/Mod by 10 to get ratio.
[CPUFREQ] checkpatch cleanups for longhaul Signed-off-by: Dave Jones <davej@redhat.com>
2009-01-18 12:29:53 +08:00
* The eblcr values specify the ratio read from the CPU.
* The mults values specify what to write to the CPU.
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
*/
/*
* VIA C3 Samuel 1 & Samuel 2 (stepping 0)
*/
cpufreq: delete __cpuinit usage from all cpufreq files The __cpuinit type of throwaway sections might have made sense some time ago when RAM was more constrained, but now the savings do not offset the cost and complications. For example, the fix in commit 5e427ec2d0 ("x86: Fix bit corruption at CPU resume time") is a good example of the nasty type of bugs that can be created with improper use of the various __init prefixes. After a discussion on LKML[1] it was decided that cpuinit should go the way of devinit and be phased out. Once all the users are gone, we can then finally remove the macros themselves from linux/init.h. This removes all the drivers/cpufreq uses of the __cpuinit macros from all C files. [1] https://lkml.org/lkml/2013/5/20/589 [v2: leave 2nd lines of args misaligned as requested by Viresh] Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Cc: Viresh Kumar <viresh.kumar@linaro.org> Cc: cpufreq@vger.kernel.org Cc: linux-pm@vger.kernel.org Acked-by: Dirk Brandewie <dirk.j.brandewie@intel.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2013-06-20 01:54:04 +08:00
static const int samuel1_mults[16] = {
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
-1, /* 0000 -> RESERVED */
30, /* 0001 -> 3.0x */
40, /* 0010 -> 4.0x */
-1, /* 0011 -> RESERVED */
-1, /* 0100 -> RESERVED */
35, /* 0101 -> 3.5x */
45, /* 0110 -> 4.5x */
55, /* 0111 -> 5.5x */
60, /* 1000 -> 6.0x */
70, /* 1001 -> 7.0x */
80, /* 1010 -> 8.0x */
50, /* 1011 -> 5.0x */
65, /* 1100 -> 6.5x */
75, /* 1101 -> 7.5x */
-1, /* 1110 -> RESERVED */
-1, /* 1111 -> RESERVED */
};
cpufreq: delete __cpuinit usage from all cpufreq files The __cpuinit type of throwaway sections might have made sense some time ago when RAM was more constrained, but now the savings do not offset the cost and complications. For example, the fix in commit 5e427ec2d0 ("x86: Fix bit corruption at CPU resume time") is a good example of the nasty type of bugs that can be created with improper use of the various __init prefixes. After a discussion on LKML[1] it was decided that cpuinit should go the way of devinit and be phased out. Once all the users are gone, we can then finally remove the macros themselves from linux/init.h. This removes all the drivers/cpufreq uses of the __cpuinit macros from all C files. [1] https://lkml.org/lkml/2013/5/20/589 [v2: leave 2nd lines of args misaligned as requested by Viresh] Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Cc: Viresh Kumar <viresh.kumar@linaro.org> Cc: cpufreq@vger.kernel.org Cc: linux-pm@vger.kernel.org Acked-by: Dirk Brandewie <dirk.j.brandewie@intel.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2013-06-20 01:54:04 +08:00
static const int samuel1_eblcr[16] = {
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
50, /* 0000 -> RESERVED */
30, /* 0001 -> 3.0x */
40, /* 0010 -> 4.0x */
-1, /* 0011 -> RESERVED */
55, /* 0100 -> 5.5x */
35, /* 0101 -> 3.5x */
45, /* 0110 -> 4.5x */
-1, /* 0111 -> RESERVED */
-1, /* 1000 -> RESERVED */
70, /* 1001 -> 7.0x */
80, /* 1010 -> 8.0x */
60, /* 1011 -> 6.0x */
-1, /* 1100 -> RESERVED */
75, /* 1101 -> 7.5x */
-1, /* 1110 -> RESERVED */
65, /* 1111 -> 6.5x */
};
/*
* VIA C3 Samuel2 Stepping 1->15
*/
cpufreq: delete __cpuinit usage from all cpufreq files The __cpuinit type of throwaway sections might have made sense some time ago when RAM was more constrained, but now the savings do not offset the cost and complications. For example, the fix in commit 5e427ec2d0 ("x86: Fix bit corruption at CPU resume time") is a good example of the nasty type of bugs that can be created with improper use of the various __init prefixes. After a discussion on LKML[1] it was decided that cpuinit should go the way of devinit and be phased out. Once all the users are gone, we can then finally remove the macros themselves from linux/init.h. This removes all the drivers/cpufreq uses of the __cpuinit macros from all C files. [1] https://lkml.org/lkml/2013/5/20/589 [v2: leave 2nd lines of args misaligned as requested by Viresh] Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Cc: Viresh Kumar <viresh.kumar@linaro.org> Cc: cpufreq@vger.kernel.org Cc: linux-pm@vger.kernel.org Acked-by: Dirk Brandewie <dirk.j.brandewie@intel.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2013-06-20 01:54:04 +08:00
static const int samuel2_eblcr[16] = {
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
50, /* 0000 -> 5.0x */
30, /* 0001 -> 3.0x */
40, /* 0010 -> 4.0x */
100, /* 0011 -> 10.0x */
55, /* 0100 -> 5.5x */
35, /* 0101 -> 3.5x */
45, /* 0110 -> 4.5x */
110, /* 0111 -> 11.0x */
90, /* 1000 -> 9.0x */
70, /* 1001 -> 7.0x */
80, /* 1010 -> 8.0x */
60, /* 1011 -> 6.0x */
120, /* 1100 -> 12.0x */
75, /* 1101 -> 7.5x */
130, /* 1110 -> 13.0x */
65, /* 1111 -> 6.5x */
};
/*
* VIA C3 Ezra
*/
cpufreq: delete __cpuinit usage from all cpufreq files The __cpuinit type of throwaway sections might have made sense some time ago when RAM was more constrained, but now the savings do not offset the cost and complications. For example, the fix in commit 5e427ec2d0 ("x86: Fix bit corruption at CPU resume time") is a good example of the nasty type of bugs that can be created with improper use of the various __init prefixes. After a discussion on LKML[1] it was decided that cpuinit should go the way of devinit and be phased out. Once all the users are gone, we can then finally remove the macros themselves from linux/init.h. This removes all the drivers/cpufreq uses of the __cpuinit macros from all C files. [1] https://lkml.org/lkml/2013/5/20/589 [v2: leave 2nd lines of args misaligned as requested by Viresh] Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Cc: Viresh Kumar <viresh.kumar@linaro.org> Cc: cpufreq@vger.kernel.org Cc: linux-pm@vger.kernel.org Acked-by: Dirk Brandewie <dirk.j.brandewie@intel.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2013-06-20 01:54:04 +08:00
static const int ezra_mults[16] = {
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
100, /* 0000 -> 10.0x */
30, /* 0001 -> 3.0x */
40, /* 0010 -> 4.0x */
90, /* 0011 -> 9.0x */
95, /* 0100 -> 9.5x */
35, /* 0101 -> 3.5x */
45, /* 0110 -> 4.5x */
55, /* 0111 -> 5.5x */
60, /* 1000 -> 6.0x */
70, /* 1001 -> 7.0x */
80, /* 1010 -> 8.0x */
50, /* 1011 -> 5.0x */
65, /* 1100 -> 6.5x */
75, /* 1101 -> 7.5x */
85, /* 1110 -> 8.5x */
120, /* 1111 -> 12.0x */
};
cpufreq: delete __cpuinit usage from all cpufreq files The __cpuinit type of throwaway sections might have made sense some time ago when RAM was more constrained, but now the savings do not offset the cost and complications. For example, the fix in commit 5e427ec2d0 ("x86: Fix bit corruption at CPU resume time") is a good example of the nasty type of bugs that can be created with improper use of the various __init prefixes. After a discussion on LKML[1] it was decided that cpuinit should go the way of devinit and be phased out. Once all the users are gone, we can then finally remove the macros themselves from linux/init.h. This removes all the drivers/cpufreq uses of the __cpuinit macros from all C files. [1] https://lkml.org/lkml/2013/5/20/589 [v2: leave 2nd lines of args misaligned as requested by Viresh] Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Cc: Viresh Kumar <viresh.kumar@linaro.org> Cc: cpufreq@vger.kernel.org Cc: linux-pm@vger.kernel.org Acked-by: Dirk Brandewie <dirk.j.brandewie@intel.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2013-06-20 01:54:04 +08:00
static const int ezra_eblcr[16] = {
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
50, /* 0000 -> 5.0x */
30, /* 0001 -> 3.0x */
40, /* 0010 -> 4.0x */
100, /* 0011 -> 10.0x */
55, /* 0100 -> 5.5x */
35, /* 0101 -> 3.5x */
45, /* 0110 -> 4.5x */
95, /* 0111 -> 9.5x */
90, /* 1000 -> 9.0x */
70, /* 1001 -> 7.0x */
80, /* 1010 -> 8.0x */
60, /* 1011 -> 6.0x */
120, /* 1100 -> 12.0x */
75, /* 1101 -> 7.5x */
85, /* 1110 -> 8.5x */
65, /* 1111 -> 6.5x */
};
/*
* VIA C3 (Ezra-T) [C5M].
*/
cpufreq: delete __cpuinit usage from all cpufreq files The __cpuinit type of throwaway sections might have made sense some time ago when RAM was more constrained, but now the savings do not offset the cost and complications. For example, the fix in commit 5e427ec2d0 ("x86: Fix bit corruption at CPU resume time") is a good example of the nasty type of bugs that can be created with improper use of the various __init prefixes. After a discussion on LKML[1] it was decided that cpuinit should go the way of devinit and be phased out. Once all the users are gone, we can then finally remove the macros themselves from linux/init.h. This removes all the drivers/cpufreq uses of the __cpuinit macros from all C files. [1] https://lkml.org/lkml/2013/5/20/589 [v2: leave 2nd lines of args misaligned as requested by Viresh] Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Cc: Viresh Kumar <viresh.kumar@linaro.org> Cc: cpufreq@vger.kernel.org Cc: linux-pm@vger.kernel.org Acked-by: Dirk Brandewie <dirk.j.brandewie@intel.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2013-06-20 01:54:04 +08:00
static const int ezrat_mults[32] = {
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
100, /* 0000 -> 10.0x */
30, /* 0001 -> 3.0x */
40, /* 0010 -> 4.0x */
90, /* 0011 -> 9.0x */
95, /* 0100 -> 9.5x */
35, /* 0101 -> 3.5x */
45, /* 0110 -> 4.5x */
55, /* 0111 -> 5.5x */
60, /* 1000 -> 6.0x */
70, /* 1001 -> 7.0x */
80, /* 1010 -> 8.0x */
50, /* 1011 -> 5.0x */
65, /* 1100 -> 6.5x */
75, /* 1101 -> 7.5x */
85, /* 1110 -> 8.5x */
120, /* 1111 -> 12.0x */
-1, /* 0000 -> RESERVED (10.0x) */
110, /* 0001 -> 11.0x */
[CPUFREQ] Longhaul - Remove duplicate multipliers Remove duplicate multipliers in clock_ratio table. On 1,4GHz Nehemiah two frequencies are present twice in table. It isn't fatal, but with voltage scaling enabled each will be set twice. Signed-off-by: Rafal Bilski <rafalbilski@interia.pl> Signed-off-by: Dave Jones <davej@redhat.com>
2007-05-29 03:58:09 +08:00
-1, /* 0010 -> 12.0x */
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
-1, /* 0011 -> RESERVED (9.0x)*/
105, /* 0100 -> 10.5x */
115, /* 0101 -> 11.5x */
125, /* 0110 -> 12.5x */
135, /* 0111 -> 13.5x */
140, /* 1000 -> 14.0x */
150, /* 1001 -> 15.0x */
160, /* 1010 -> 16.0x */
130, /* 1011 -> 13.0x */
145, /* 1100 -> 14.5x */
155, /* 1101 -> 15.5x */
-1, /* 1110 -> RESERVED (13.0x) */
-1, /* 1111 -> RESERVED (12.0x) */
};
cpufreq: delete __cpuinit usage from all cpufreq files The __cpuinit type of throwaway sections might have made sense some time ago when RAM was more constrained, but now the savings do not offset the cost and complications. For example, the fix in commit 5e427ec2d0 ("x86: Fix bit corruption at CPU resume time") is a good example of the nasty type of bugs that can be created with improper use of the various __init prefixes. After a discussion on LKML[1] it was decided that cpuinit should go the way of devinit and be phased out. Once all the users are gone, we can then finally remove the macros themselves from linux/init.h. This removes all the drivers/cpufreq uses of the __cpuinit macros from all C files. [1] https://lkml.org/lkml/2013/5/20/589 [v2: leave 2nd lines of args misaligned as requested by Viresh] Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Cc: Viresh Kumar <viresh.kumar@linaro.org> Cc: cpufreq@vger.kernel.org Cc: linux-pm@vger.kernel.org Acked-by: Dirk Brandewie <dirk.j.brandewie@intel.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2013-06-20 01:54:04 +08:00
static const int ezrat_eblcr[32] = {
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
50, /* 0000 -> 5.0x */
30, /* 0001 -> 3.0x */
40, /* 0010 -> 4.0x */
100, /* 0011 -> 10.0x */
55, /* 0100 -> 5.5x */
35, /* 0101 -> 3.5x */
45, /* 0110 -> 4.5x */
95, /* 0111 -> 9.5x */
90, /* 1000 -> 9.0x */
70, /* 1001 -> 7.0x */
80, /* 1010 -> 8.0x */
60, /* 1011 -> 6.0x */
120, /* 1100 -> 12.0x */
75, /* 1101 -> 7.5x */
85, /* 1110 -> 8.5x */
65, /* 1111 -> 6.5x */
-1, /* 0000 -> RESERVED (9.0x) */
110, /* 0001 -> 11.0x */
120, /* 0010 -> 12.0x */
-1, /* 0011 -> RESERVED (10.0x)*/
135, /* 0100 -> 13.5x */
115, /* 0101 -> 11.5x */
125, /* 0110 -> 12.5x */
105, /* 0111 -> 10.5x */
130, /* 1000 -> 13.0x */
150, /* 1001 -> 15.0x */
160, /* 1010 -> 16.0x */
140, /* 1011 -> 14.0x */
-1, /* 1100 -> RESERVED (12.0x) */
155, /* 1101 -> 15.5x */
-1, /* 1110 -> RESERVED (13.0x) */
145, /* 1111 -> 14.5x */
};
/*
* VIA C3 Nehemiah */
[CPUFREQ] Lots of whitespace & CodingStyle cleanup. Signed-off-by: Dave Jones <davej@redhat.com>
2006-02-28 13:43:23 +08:00
cpufreq: delete __cpuinit usage from all cpufreq files The __cpuinit type of throwaway sections might have made sense some time ago when RAM was more constrained, but now the savings do not offset the cost and complications. For example, the fix in commit 5e427ec2d0 ("x86: Fix bit corruption at CPU resume time") is a good example of the nasty type of bugs that can be created with improper use of the various __init prefixes. After a discussion on LKML[1] it was decided that cpuinit should go the way of devinit and be phased out. Once all the users are gone, we can then finally remove the macros themselves from linux/init.h. This removes all the drivers/cpufreq uses of the __cpuinit macros from all C files. [1] https://lkml.org/lkml/2013/5/20/589 [v2: leave 2nd lines of args misaligned as requested by Viresh] Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Cc: Viresh Kumar <viresh.kumar@linaro.org> Cc: cpufreq@vger.kernel.org Cc: linux-pm@vger.kernel.org Acked-by: Dirk Brandewie <dirk.j.brandewie@intel.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2013-06-20 01:54:04 +08:00
static const int nehemiah_mults[32] = {
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
100, /* 0000 -> 10.0x */
[CPUFREQ] Longhaul - Remove duplicate multipliers Remove duplicate multipliers in clock_ratio table. On 1,4GHz Nehemiah two frequencies are present twice in table. It isn't fatal, but with voltage scaling enabled each will be set twice. Signed-off-by: Rafal Bilski <rafalbilski@interia.pl> Signed-off-by: Dave Jones <davej@redhat.com>
2007-05-29 03:58:09 +08:00
-1, /* 0001 -> 16.0x */
[CPUFREQ] Longhaul - Remove duplicate tables Now there is no need to depend on -1 in Nehemiah tables. After previous change code is eliminating multipliers lower then 5.0 by minmult for Nehemiah A and B. Signed-off-by: Rafa³ Bilski <rafalbilski@interia.pl> Signed-off-by: Dave Jones <davej@redhat.com>
2007-02-01 06:50:49 +08:00
40, /* 0010 -> 4.0x */
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
90, /* 0011 -> 9.0x */
95, /* 0100 -> 9.5x */
-1, /* 0101 -> RESERVED */
[CPUFREQ] Longhaul - Remove duplicate tables Now there is no need to depend on -1 in Nehemiah tables. After previous change code is eliminating multipliers lower then 5.0 by minmult for Nehemiah A and B. Signed-off-by: Rafa³ Bilski <rafalbilski@interia.pl> Signed-off-by: Dave Jones <davej@redhat.com>
2007-02-01 06:50:49 +08:00
45, /* 0110 -> 4.5x */
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
55, /* 0111 -> 5.5x */
60, /* 1000 -> 6.0x */
70, /* 1001 -> 7.0x */
80, /* 1010 -> 8.0x */
50, /* 1011 -> 5.0x */
65, /* 1100 -> 6.5x */
75, /* 1101 -> 7.5x */
85, /* 1110 -> 8.5x */
120, /* 1111 -> 12.0x */
[CPUFREQ] Longhaul - Remove duplicate multipliers Remove duplicate multipliers in clock_ratio table. On 1,4GHz Nehemiah two frequencies are present twice in table. It isn't fatal, but with voltage scaling enabled each will be set twice. Signed-off-by: Rafal Bilski <rafalbilski@interia.pl> Signed-off-by: Dave Jones <davej@redhat.com>
2007-05-29 03:58:09 +08:00
-1, /* 0000 -> 10.0x */
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
110, /* 0001 -> 11.0x */
[CPUFREQ] Longhaul - Remove duplicate multipliers Remove duplicate multipliers in clock_ratio table. On 1,4GHz Nehemiah two frequencies are present twice in table. It isn't fatal, but with voltage scaling enabled each will be set twice. Signed-off-by: Rafal Bilski <rafalbilski@interia.pl> Signed-off-by: Dave Jones <davej@redhat.com>
2007-05-29 03:58:09 +08:00
-1, /* 0010 -> 12.0x */
-1, /* 0011 -> 9.0x */
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
105, /* 0100 -> 10.5x */
115, /* 0101 -> 11.5x */
125, /* 0110 -> 12.5x */
135, /* 0111 -> 13.5x */
140, /* 1000 -> 14.0x */
150, /* 1001 -> 15.0x */
160, /* 1010 -> 16.0x */
130, /* 1011 -> 13.0x */
145, /* 1100 -> 14.5x */
155, /* 1101 -> 15.5x */
-1, /* 1110 -> RESERVED (13.0x) */
[CPUFREQ] Longhaul - Remove duplicate multipliers Remove duplicate multipliers in clock_ratio table. On 1,4GHz Nehemiah two frequencies are present twice in table. It isn't fatal, but with voltage scaling enabled each will be set twice. Signed-off-by: Rafal Bilski <rafalbilski@interia.pl> Signed-off-by: Dave Jones <davej@redhat.com>
2007-05-29 03:58:09 +08:00
-1, /* 1111 -> 12.0x */
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
};
cpufreq: delete __cpuinit usage from all cpufreq files The __cpuinit type of throwaway sections might have made sense some time ago when RAM was more constrained, but now the savings do not offset the cost and complications. For example, the fix in commit 5e427ec2d0 ("x86: Fix bit corruption at CPU resume time") is a good example of the nasty type of bugs that can be created with improper use of the various __init prefixes. After a discussion on LKML[1] it was decided that cpuinit should go the way of devinit and be phased out. Once all the users are gone, we can then finally remove the macros themselves from linux/init.h. This removes all the drivers/cpufreq uses of the __cpuinit macros from all C files. [1] https://lkml.org/lkml/2013/5/20/589 [v2: leave 2nd lines of args misaligned as requested by Viresh] Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Cc: Viresh Kumar <viresh.kumar@linaro.org> Cc: cpufreq@vger.kernel.org Cc: linux-pm@vger.kernel.org Acked-by: Dirk Brandewie <dirk.j.brandewie@intel.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2013-06-20 01:54:04 +08:00
static const int nehemiah_eblcr[32] = {
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
50, /* 0000 -> 5.0x */
160, /* 0001 -> 16.0x */
[CPUFREQ] Longhaul - Remove duplicate tables Now there is no need to depend on -1 in Nehemiah tables. After previous change code is eliminating multipliers lower then 5.0 by minmult for Nehemiah A and B. Signed-off-by: Rafa³ Bilski <rafalbilski@interia.pl> Signed-off-by: Dave Jones <davej@redhat.com>
2007-02-01 06:50:49 +08:00
40, /* 0010 -> 4.0x */
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
100, /* 0011 -> 10.0x */
55, /* 0100 -> 5.5x */
-1, /* 0101 -> RESERVED */
[CPUFREQ] Longhaul - Remove duplicate tables Now there is no need to depend on -1 in Nehemiah tables. After previous change code is eliminating multipliers lower then 5.0 by minmult for Nehemiah A and B. Signed-off-by: Rafa³ Bilski <rafalbilski@interia.pl> Signed-off-by: Dave Jones <davej@redhat.com>
2007-02-01 06:50:49 +08:00
45, /* 0110 -> 4.5x */
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
95, /* 0111 -> 9.5x */
90, /* 1000 -> 9.0x */
70, /* 1001 -> 7.0x */
80, /* 1010 -> 8.0x */
60, /* 1011 -> 6.0x */
120, /* 1100 -> 12.0x */
75, /* 1101 -> 7.5x */
85, /* 1110 -> 8.5x */
65, /* 1111 -> 6.5x */
90, /* 0000 -> 9.0x */
110, /* 0001 -> 11.0x */
120, /* 0010 -> 12.0x */
100, /* 0011 -> 10.0x */
135, /* 0100 -> 13.5x */
115, /* 0101 -> 11.5x */
125, /* 0110 -> 12.5x */
105, /* 0111 -> 10.5x */
130, /* 1000 -> 13.0x */
150, /* 1001 -> 15.0x */
160, /* 1010 -> 16.0x */
140, /* 1011 -> 14.0x */
120, /* 1100 -> 12.0x */
155, /* 1101 -> 15.5x */
-1, /* 1110 -> RESERVED (13.0x) */
145 /* 1111 -> 14.5x */
};
[CPUFREQ] Lots of whitespace & CodingStyle cleanup. Signed-off-by: Dave Jones <davej@redhat.com>
2006-02-28 13:43:23 +08:00
/*
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
* Voltage scales. Div/Mod by 1000 to get actual voltage.
* Which scale to use depends on the VRM type in use.
*/
[CPUFREQ] Longhaul - Add voltage scaling to driver Rename option "dont_scale_voltage" to "scale_voltage" because don't will be default. Use "pos" for calculating voltage. In this way driver don't need to know mV value or low level value. Simply min U is one pos and max U is second pos. All pos between these two are used. Assume that min U is for min f and max U for max f. For frequency between min and max calculate pos based on difference between current frequency and min f. Values in mobile VRM table changed to values from C3-M datasheet. Signed-off-by: Rafa³ Bilski <rafalbilski@interia.pl> Signed-off-by: Dave Jones <davej@redhat.com>
2006-08-16 07:07:33 +08:00
struct mV_pos {
unsigned short mV;
unsigned short pos;
};
cpufreq: delete __cpuinit usage from all cpufreq files The __cpuinit type of throwaway sections might have made sense some time ago when RAM was more constrained, but now the savings do not offset the cost and complications. For example, the fix in commit 5e427ec2d0 ("x86: Fix bit corruption at CPU resume time") is a good example of the nasty type of bugs that can be created with improper use of the various __init prefixes. After a discussion on LKML[1] it was decided that cpuinit should go the way of devinit and be phased out. Once all the users are gone, we can then finally remove the macros themselves from linux/init.h. This removes all the drivers/cpufreq uses of the __cpuinit macros from all C files. [1] https://lkml.org/lkml/2013/5/20/589 [v2: leave 2nd lines of args misaligned as requested by Viresh] Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Cc: Viresh Kumar <viresh.kumar@linaro.org> Cc: cpufreq@vger.kernel.org Cc: linux-pm@vger.kernel.org Acked-by: Dirk Brandewie <dirk.j.brandewie@intel.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2013-06-20 01:54:04 +08:00
static const struct mV_pos vrm85_mV[32] = {
[CPUFREQ] Longhaul - Add voltage scaling to driver Rename option "dont_scale_voltage" to "scale_voltage" because don't will be default. Use "pos" for calculating voltage. In this way driver don't need to know mV value or low level value. Simply min U is one pos and max U is second pos. All pos between these two are used. Assume that min U is for min f and max U for max f. For frequency between min and max calculate pos based on difference between current frequency and min f. Values in mobile VRM table changed to values from C3-M datasheet. Signed-off-by: Rafa³ Bilski <rafalbilski@interia.pl> Signed-off-by: Dave Jones <davej@redhat.com>
2006-08-16 07:07:33 +08:00
{1250, 8}, {1200, 6}, {1150, 4}, {1100, 2},
{1050, 0}, {1800, 30}, {1750, 28}, {1700, 26},
{1650, 24}, {1600, 22}, {1550, 20}, {1500, 18},
{1450, 16}, {1400, 14}, {1350, 12}, {1300, 10},
{1275, 9}, {1225, 7}, {1175, 5}, {1125, 3},
{1075, 1}, {1825, 31}, {1775, 29}, {1725, 27},
{1675, 25}, {1625, 23}, {1575, 21}, {1525, 19},
{1475, 17}, {1425, 15}, {1375, 13}, {1325, 11}
};
cpufreq: delete __cpuinit usage from all cpufreq files The __cpuinit type of throwaway sections might have made sense some time ago when RAM was more constrained, but now the savings do not offset the cost and complications. For example, the fix in commit 5e427ec2d0 ("x86: Fix bit corruption at CPU resume time") is a good example of the nasty type of bugs that can be created with improper use of the various __init prefixes. After a discussion on LKML[1] it was decided that cpuinit should go the way of devinit and be phased out. Once all the users are gone, we can then finally remove the macros themselves from linux/init.h. This removes all the drivers/cpufreq uses of the __cpuinit macros from all C files. [1] https://lkml.org/lkml/2013/5/20/589 [v2: leave 2nd lines of args misaligned as requested by Viresh] Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Cc: Viresh Kumar <viresh.kumar@linaro.org> Cc: cpufreq@vger.kernel.org Cc: linux-pm@vger.kernel.org Acked-by: Dirk Brandewie <dirk.j.brandewie@intel.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2013-06-20 01:54:04 +08:00
static const unsigned char mV_vrm85[32] = {
[CPUFREQ] Longhaul - Add voltage scaling to driver Rename option "dont_scale_voltage" to "scale_voltage" because don't will be default. Use "pos" for calculating voltage. In this way driver don't need to know mV value or low level value. Simply min U is one pos and max U is second pos. All pos between these two are used. Assume that min U is for min f and max U for max f. For frequency between min and max calculate pos based on difference between current frequency and min f. Values in mobile VRM table changed to values from C3-M datasheet. Signed-off-by: Rafa³ Bilski <rafalbilski@interia.pl> Signed-off-by: Dave Jones <davej@redhat.com>
2006-08-16 07:07:33 +08:00
0x04, 0x14, 0x03, 0x13, 0x02, 0x12, 0x01, 0x11,
0x00, 0x10, 0x0f, 0x1f, 0x0e, 0x1e, 0x0d, 0x1d,
0x0c, 0x1c, 0x0b, 0x1b, 0x0a, 0x1a, 0x09, 0x19,
0x08, 0x18, 0x07, 0x17, 0x06, 0x16, 0x05, 0x15
};
cpufreq: delete __cpuinit usage from all cpufreq files The __cpuinit type of throwaway sections might have made sense some time ago when RAM was more constrained, but now the savings do not offset the cost and complications. For example, the fix in commit 5e427ec2d0 ("x86: Fix bit corruption at CPU resume time") is a good example of the nasty type of bugs that can be created with improper use of the various __init prefixes. After a discussion on LKML[1] it was decided that cpuinit should go the way of devinit and be phased out. Once all the users are gone, we can then finally remove the macros themselves from linux/init.h. This removes all the drivers/cpufreq uses of the __cpuinit macros from all C files. [1] https://lkml.org/lkml/2013/5/20/589 [v2: leave 2nd lines of args misaligned as requested by Viresh] Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Cc: Viresh Kumar <viresh.kumar@linaro.org> Cc: cpufreq@vger.kernel.org Cc: linux-pm@vger.kernel.org Acked-by: Dirk Brandewie <dirk.j.brandewie@intel.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2013-06-20 01:54:04 +08:00
static const struct mV_pos mobilevrm_mV[32] = {
[CPUFREQ] Longhaul - Add voltage scaling to driver Rename option "dont_scale_voltage" to "scale_voltage" because don't will be default. Use "pos" for calculating voltage. In this way driver don't need to know mV value or low level value. Simply min U is one pos and max U is second pos. All pos between these two are used. Assume that min U is for min f and max U for max f. For frequency between min and max calculate pos based on difference between current frequency and min f. Values in mobile VRM table changed to values from C3-M datasheet. Signed-off-by: Rafa³ Bilski <rafalbilski@interia.pl> Signed-off-by: Dave Jones <davej@redhat.com>
2006-08-16 07:07:33 +08:00
{1750, 31}, {1700, 30}, {1650, 29}, {1600, 28},
{1550, 27}, {1500, 26}, {1450, 25}, {1400, 24},
{1350, 23}, {1300, 22}, {1250, 21}, {1200, 20},
{1150, 19}, {1100, 18}, {1050, 17}, {1000, 16},
{975, 15}, {950, 14}, {925, 13}, {900, 12},
{875, 11}, {850, 10}, {825, 9}, {800, 8},
{775, 7}, {750, 6}, {725, 5}, {700, 4},
{675, 3}, {650, 2}, {625, 1}, {600, 0}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
};
cpufreq: delete __cpuinit usage from all cpufreq files The __cpuinit type of throwaway sections might have made sense some time ago when RAM was more constrained, but now the savings do not offset the cost and complications. For example, the fix in commit 5e427ec2d0 ("x86: Fix bit corruption at CPU resume time") is a good example of the nasty type of bugs that can be created with improper use of the various __init prefixes. After a discussion on LKML[1] it was decided that cpuinit should go the way of devinit and be phased out. Once all the users are gone, we can then finally remove the macros themselves from linux/init.h. This removes all the drivers/cpufreq uses of the __cpuinit macros from all C files. [1] https://lkml.org/lkml/2013/5/20/589 [v2: leave 2nd lines of args misaligned as requested by Viresh] Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Cc: Viresh Kumar <viresh.kumar@linaro.org> Cc: cpufreq@vger.kernel.org Cc: linux-pm@vger.kernel.org Acked-by: Dirk Brandewie <dirk.j.brandewie@intel.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2013-06-20 01:54:04 +08:00
static const unsigned char mV_mobilevrm[32] = {
[CPUFREQ] Longhaul - Add voltage scaling to driver Rename option "dont_scale_voltage" to "scale_voltage" because don't will be default. Use "pos" for calculating voltage. In this way driver don't need to know mV value or low level value. Simply min U is one pos and max U is second pos. All pos between these two are used. Assume that min U is for min f and max U for max f. For frequency between min and max calculate pos based on difference between current frequency and min f. Values in mobile VRM table changed to values from C3-M datasheet. Signed-off-by: Rafa³ Bilski <rafalbilski@interia.pl> Signed-off-by: Dave Jones <davej@redhat.com>
2006-08-16 07:07:33 +08:00
0x1f, 0x1e, 0x1d, 0x1c, 0x1b, 0x1a, 0x19, 0x18,
0x17, 0x16, 0x15, 0x14, 0x13, 0x12, 0x11, 0x10,
0x0f, 0x0e, 0x0d, 0x0c, 0x0b, 0x0a, 0x09, 0x08,
0x07, 0x06, 0x05, 0x04, 0x03, 0x02, 0x01, 0x00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
};