OpenCloudOS-Kernel/drivers/net/wireless/ath/ath9k/main.c

2425 lines
59 KiB
C
Raw Normal View History

/*
* Copyright (c) 2008-2011 Atheros Communications Inc.
*
* Permission to use, copy, modify, and/or distribute this software for any
* purpose with or without fee is hereby granted, provided that the above
* copyright notice and this permission notice appear in all copies.
*
* THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
* WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
* ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
* WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
* ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
* OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
*/
#include <linux/nl80211.h>
#include <linux/delay.h>
#include "ath9k.h"
#include "btcoex.h"
static void ath9k_set_assoc_state(struct ath_softc *sc,
struct ieee80211_vif *vif);
u8 ath9k_parse_mpdudensity(u8 mpdudensity)
{
/*
* 802.11n D2.0 defined values for "Minimum MPDU Start Spacing":
* 0 for no restriction
* 1 for 1/4 us
* 2 for 1/2 us
* 3 for 1 us
* 4 for 2 us
* 5 for 4 us
* 6 for 8 us
* 7 for 16 us
*/
switch (mpdudensity) {
case 0:
return 0;
case 1:
case 2:
case 3:
/* Our lower layer calculations limit our precision to
1 microsecond */
return 1;
case 4:
return 2;
case 5:
return 4;
case 6:
return 8;
case 7:
return 16;
default:
return 0;
}
}
static bool ath9k_has_pending_frames(struct ath_softc *sc, struct ath_txq *txq)
{
bool pending = false;
spin_lock_bh(&txq->axq_lock);
if (txq->axq_depth || !list_empty(&txq->axq_acq))
pending = true;
spin_unlock_bh(&txq->axq_lock);
return pending;
}
static bool ath9k_setpower(struct ath_softc *sc, enum ath9k_power_mode mode)
{
unsigned long flags;
bool ret;
spin_lock_irqsave(&sc->sc_pm_lock, flags);
ret = ath9k_hw_setpower(sc->sc_ah, mode);
spin_unlock_irqrestore(&sc->sc_pm_lock, flags);
return ret;
}
void ath9k_ps_wakeup(struct ath_softc *sc)
{
struct ath_common *common = ath9k_hw_common(sc->sc_ah);
unsigned long flags;
enum ath9k_power_mode power_mode;
spin_lock_irqsave(&sc->sc_pm_lock, flags);
if (++sc->ps_usecount != 1)
goto unlock;
power_mode = sc->sc_ah->power_mode;
ath9k_hw_setpower(sc->sc_ah, ATH9K_PM_AWAKE);
/*
* While the hardware is asleep, the cycle counters contain no
* useful data. Better clear them now so that they don't mess up
* survey data results.
*/
if (power_mode != ATH9K_PM_AWAKE) {
spin_lock(&common->cc_lock);
ath_hw_cycle_counters_update(common);
memset(&common->cc_survey, 0, sizeof(common->cc_survey));
memset(&common->cc_ani, 0, sizeof(common->cc_ani));
spin_unlock(&common->cc_lock);
}
unlock:
spin_unlock_irqrestore(&sc->sc_pm_lock, flags);
}
void ath9k_ps_restore(struct ath_softc *sc)
{
struct ath_common *common = ath9k_hw_common(sc->sc_ah);
enum ath9k_power_mode mode;
unsigned long flags;
bool reset;
spin_lock_irqsave(&sc->sc_pm_lock, flags);
if (--sc->ps_usecount != 0)
goto unlock;
if (sc->ps_idle) {
ath9k_hw_setrxabort(sc->sc_ah, 1);
ath9k_hw_stopdmarecv(sc->sc_ah, &reset);
mode = ATH9K_PM_FULL_SLEEP;
} else if (sc->ps_enabled &&
!(sc->ps_flags & (PS_WAIT_FOR_BEACON |
PS_WAIT_FOR_CAB |
PS_WAIT_FOR_PSPOLL_DATA |
PS_WAIT_FOR_TX_ACK |
PS_WAIT_FOR_ANI))) {
mode = ATH9K_PM_NETWORK_SLEEP;
if (ath9k_hw_btcoex_is_enabled(sc->sc_ah))
ath9k_btcoex_stop_gen_timer(sc);
} else {
goto unlock;
}
spin_lock(&common->cc_lock);
ath_hw_cycle_counters_update(common);
spin_unlock(&common->cc_lock);
ath9k_hw_setpower(sc->sc_ah, mode);
unlock:
spin_unlock_irqrestore(&sc->sc_pm_lock, flags);
}
static void __ath_cancel_work(struct ath_softc *sc)
{
cancel_work_sync(&sc->paprd_work);
cancel_work_sync(&sc->hw_check_work);
cancel_delayed_work_sync(&sc->tx_complete_work);
cancel_delayed_work_sync(&sc->hw_pll_work);
ath9k: Fix lockdep splat Cancel the MCI work only when MCI is actually enabled. Fixes this: [96833.124051] Call Trace: [96833.124060] [<ffffffff810afaf8>] __lock_acquire+0x1518/0x1e40 [96833.124065] [<ffffffff810ad126>] ? mark_held_locks+0x86/0x110 [96833.124069] [<ffffffff810ad3ad>] ? trace_hardirqs_on+0xd/0x10 [96833.124073] [<ffffffff814464f0>] ? _raw_spin_unlock_irq+0x30/0x70 [96833.124078] [<ffffffff81072968>] ? wait_on_cpu_work+0x98/0xc0 [96833.124082] [<ffffffff810b0a11>] lock_acquire+0xa1/0x150 [96833.124085] [<ffffffff81072990>] ? wait_on_cpu_work+0xc0/0xc0 [96833.124088] [<ffffffff81072990>] ? wait_on_cpu_work+0xc0/0xc0 [96833.124092] [<ffffffff810729e2>] wait_on_work+0x52/0x120 [96833.124095] [<ffffffff81072990>] ? wait_on_cpu_work+0xc0/0xc0 [96833.124099] [<ffffffff81063b3f>] ? del_timer+0x7f/0x110 [96833.124102] [<ffffffff81072c13>] __cancel_work_timer+0x83/0x130 [96833.124106] [<ffffffff81072cf0>] cancel_work_sync+0x10/0x20 [96833.124113] [<ffffffffa065b5cd>] __ath_cancel_work+0x4d/0x60 [ath9k] [96833.124119] [<ffffffffa065cf28>] ath9k_config+0x458/0x680 [ath9k] [96833.124125] [<ffffffffa065dd1e>] ? ath9k_flush+0x6e/0x1d0 [ath9k] [96833.124129] [<ffffffff8144394d>] ? __mutex_unlock_slowpath+0x10d/0x190 [96833.124146] [<ffffffffa056c7b5>] ieee80211_hw_config+0x135/0x2a0 [mac80211] [96833.124163] [<ffffffffa057ebbb>] ieee80211_do_open+0x67b/0xc50 [mac80211] [96833.124178] [<ffffffffa057f1fd>] ieee80211_open+0x6d/0x80 [mac80211] [96833.124183] [<ffffffff8137a44f>] __dev_open+0x9f/0xf0 [96833.124187] [<ffffffff8137a701>] __dev_change_flags+0xa1/0x180 [96833.124190] [<ffffffff8137a898>] dev_change_flags+0x28/0x70 [96833.124195] [<ffffffff813e1179>] devinet_ioctl+0x659/0x780 [96833.124199] [<ffffffff8137aea0>] ? dev_ioctl+0x210/0x6d0 [96833.124203] [<ffffffff813e1db5>] inet_ioctl+0x75/0x90 [96833.124208] [<ffffffff8135e0e0>] sock_do_ioctl+0x30/0x70 [96833.124211] [<ffffffff8135e3dd>] sock_ioctl+0x7d/0x2c0 [96833.124218] [<ffffffff81193c39>] do_vfs_ioctl+0x99/0x580 [96833.124222] [<ffffffff81447415>] ? sysret_check+0x22/0x5d [96833.124226] [<ffffffff811941b9>] sys_ioctl+0x99/0xa0 [96833.124230] [<ffffffff814473e9>] system_call_fastpath+0x16/0x1b Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-06-25 16:24:22 +08:00
#ifdef CONFIG_ATH9K_BTCOEX_SUPPORT
ath9k: Fix lockdep splat Cancel the MCI work only when MCI is actually enabled. Fixes this: [96833.124051] Call Trace: [96833.124060] [<ffffffff810afaf8>] __lock_acquire+0x1518/0x1e40 [96833.124065] [<ffffffff810ad126>] ? mark_held_locks+0x86/0x110 [96833.124069] [<ffffffff810ad3ad>] ? trace_hardirqs_on+0xd/0x10 [96833.124073] [<ffffffff814464f0>] ? _raw_spin_unlock_irq+0x30/0x70 [96833.124078] [<ffffffff81072968>] ? wait_on_cpu_work+0x98/0xc0 [96833.124082] [<ffffffff810b0a11>] lock_acquire+0xa1/0x150 [96833.124085] [<ffffffff81072990>] ? wait_on_cpu_work+0xc0/0xc0 [96833.124088] [<ffffffff81072990>] ? wait_on_cpu_work+0xc0/0xc0 [96833.124092] [<ffffffff810729e2>] wait_on_work+0x52/0x120 [96833.124095] [<ffffffff81072990>] ? wait_on_cpu_work+0xc0/0xc0 [96833.124099] [<ffffffff81063b3f>] ? del_timer+0x7f/0x110 [96833.124102] [<ffffffff81072c13>] __cancel_work_timer+0x83/0x130 [96833.124106] [<ffffffff81072cf0>] cancel_work_sync+0x10/0x20 [96833.124113] [<ffffffffa065b5cd>] __ath_cancel_work+0x4d/0x60 [ath9k] [96833.124119] [<ffffffffa065cf28>] ath9k_config+0x458/0x680 [ath9k] [96833.124125] [<ffffffffa065dd1e>] ? ath9k_flush+0x6e/0x1d0 [ath9k] [96833.124129] [<ffffffff8144394d>] ? __mutex_unlock_slowpath+0x10d/0x190 [96833.124146] [<ffffffffa056c7b5>] ieee80211_hw_config+0x135/0x2a0 [mac80211] [96833.124163] [<ffffffffa057ebbb>] ieee80211_do_open+0x67b/0xc50 [mac80211] [96833.124178] [<ffffffffa057f1fd>] ieee80211_open+0x6d/0x80 [mac80211] [96833.124183] [<ffffffff8137a44f>] __dev_open+0x9f/0xf0 [96833.124187] [<ffffffff8137a701>] __dev_change_flags+0xa1/0x180 [96833.124190] [<ffffffff8137a898>] dev_change_flags+0x28/0x70 [96833.124195] [<ffffffff813e1179>] devinet_ioctl+0x659/0x780 [96833.124199] [<ffffffff8137aea0>] ? dev_ioctl+0x210/0x6d0 [96833.124203] [<ffffffff813e1db5>] inet_ioctl+0x75/0x90 [96833.124208] [<ffffffff8135e0e0>] sock_do_ioctl+0x30/0x70 [96833.124211] [<ffffffff8135e3dd>] sock_ioctl+0x7d/0x2c0 [96833.124218] [<ffffffff81193c39>] do_vfs_ioctl+0x99/0x580 [96833.124222] [<ffffffff81447415>] ? sysret_check+0x22/0x5d [96833.124226] [<ffffffff811941b9>] sys_ioctl+0x99/0xa0 [96833.124230] [<ffffffff814473e9>] system_call_fastpath+0x16/0x1b Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-06-25 16:24:22 +08:00
if (ath9k_hw_mci_is_enabled(sc->sc_ah))
cancel_work_sync(&sc->mci_work);
#endif
}
static void ath_cancel_work(struct ath_softc *sc)
{
__ath_cancel_work(sc);
cancel_work_sync(&sc->hw_reset_work);
}
static void ath_restart_work(struct ath_softc *sc)
{
ieee80211_queue_delayed_work(sc->hw, &sc->tx_complete_work, 0);
if (AR_SREV_9340(sc->sc_ah) || AR_SREV_9485(sc->sc_ah) ||
AR_SREV_9550(sc->sc_ah))
ieee80211_queue_delayed_work(sc->hw, &sc->hw_pll_work,
msecs_to_jiffies(ATH_PLL_WORK_INTERVAL));
ath_start_rx_poll(sc, 3);
ath_start_ani(sc);
}
static bool ath_prepare_reset(struct ath_softc *sc, bool retry_tx, bool flush)
{
struct ath_hw *ah = sc->sc_ah;
bool ret = true;
ieee80211_stop_queues(sc->hw);
sc->hw_busy_count = 0;
ath_stop_ani(sc);
del_timer_sync(&sc->rx_poll_timer);
ath9k_debug_samp_bb_mac(sc);
ath9k_hw_disable_interrupts(ah);
if (!ath_stoprecv(sc))
ret = false;
if (!ath_drain_all_txq(sc, retry_tx))
ret = false;
if (!flush) {
if (ah->caps.hw_caps & ATH9K_HW_CAP_EDMA)
ath_rx_tasklet(sc, 1, true);
ath_rx_tasklet(sc, 1, false);
} else {
ath_flushrecv(sc);
}
return ret;
}
static bool ath_complete_reset(struct ath_softc *sc, bool start)
{
struct ath_hw *ah = sc->sc_ah;
struct ath_common *common = ath9k_hw_common(ah);
unsigned long flags;
if (ath_startrecv(sc) != 0) {
ath_err(common, "Unable to restart recv logic\n");
return false;
}
ath9k_cmn_update_txpow(ah, sc->curtxpow,
sc->config.txpowlimit, &sc->curtxpow);
clear_bit(SC_OP_HW_RESET, &sc->sc_flags);
ath9k_hw_set_interrupts(ah);
ath9k_hw_enable_interrupts(ah);
if (!(sc->hw->conf.flags & IEEE80211_CONF_OFFCHANNEL) && start) {
if (!test_bit(SC_OP_BEACONS, &sc->sc_flags))
goto work;
ath9k_set_beacon(sc);
if (ah->opmode == NL80211_IFTYPE_STATION &&
test_bit(SC_OP_PRIM_STA_VIF, &sc->sc_flags)) {
spin_lock_irqsave(&sc->sc_pm_lock, flags);
sc->ps_flags |= PS_BEACON_SYNC | PS_WAIT_FOR_BEACON;
spin_unlock_irqrestore(&sc->sc_pm_lock, flags);
}
work:
ath_restart_work(sc);
}
if ((ah->caps.hw_caps & ATH9K_HW_CAP_ANT_DIV_COMB) && sc->ant_rx != 3)
ath_ant_comb_update(sc);
ieee80211_wake_queues(sc->hw);
return true;
}
static int ath_reset_internal(struct ath_softc *sc, struct ath9k_channel *hchan,
bool retry_tx)
{
struct ath_hw *ah = sc->sc_ah;
struct ath_common *common = ath9k_hw_common(ah);
struct ath9k_hw_cal_data *caldata = NULL;
bool fastcc = true;
bool flush = false;
int r;
__ath_cancel_work(sc);
spin_lock_bh(&sc->sc_pcu_lock);
if (!(sc->hw->conf.flags & IEEE80211_CONF_OFFCHANNEL)) {
fastcc = false;
caldata = &sc->caldata;
}
if (!hchan) {
fastcc = false;
flush = true;
hchan = ah->curchan;
}
if (!ath_prepare_reset(sc, retry_tx, flush))
fastcc = false;
ath_dbg(common, CONFIG, "Reset to %u MHz, HT40: %d fastcc: %d\n",
hchan->channel, IS_CHAN_HT40(hchan), fastcc);
r = ath9k_hw_reset(ah, hchan, caldata, fastcc);
if (r) {
ath_err(common,
"Unable to reset channel, reset status %d\n", r);
goto out;
}
if (ath9k_hw_mci_is_enabled(sc->sc_ah) &&
(sc->hw->conf.flags & IEEE80211_CONF_OFFCHANNEL))
ath9k_mci_set_txpower(sc, true, false);
if (!ath_complete_reset(sc, true))
r = -EIO;
out:
spin_unlock_bh(&sc->sc_pcu_lock);
return r;
}
/*
* Set/change channels. If the channel is really being changed, it's done
* by reseting the chip. To accomplish this we must first cleanup any pending
* DMA, then restart stuff.
*/
static int ath_set_channel(struct ath_softc *sc, struct ieee80211_hw *hw,
struct ath9k_channel *hchan)
{
int r;
if (test_bit(SC_OP_INVALID, &sc->sc_flags))
return -EIO;
r = ath_reset_internal(sc, hchan, false);
return r;
}
static void ath_node_attach(struct ath_softc *sc, struct ieee80211_sta *sta,
struct ieee80211_vif *vif)
{
struct ath_node *an;
u8 density;
an = (struct ath_node *)sta->drv_priv;
#ifdef CONFIG_ATH9K_DEBUGFS
spin_lock(&sc->nodes_lock);
list_add(&an->list, &sc->nodes);
spin_unlock(&sc->nodes_lock);
#endif
an->sta = sta;
an->vif = vif;
if (sc->sc_ah->caps.hw_caps & ATH9K_HW_CAP_HT) {
ath_tx_node_init(sc, an);
an->maxampdu = 1 << (IEEE80211_HT_MAX_AMPDU_FACTOR +
sta->ht_cap.ampdu_factor);
density = ath9k_parse_mpdudensity(sta->ht_cap.ampdu_density);
an->mpdudensity = density;
}
}
static void ath_node_detach(struct ath_softc *sc, struct ieee80211_sta *sta)
{
struct ath_node *an = (struct ath_node *)sta->drv_priv;
#ifdef CONFIG_ATH9K_DEBUGFS
spin_lock(&sc->nodes_lock);
list_del(&an->list);
spin_unlock(&sc->nodes_lock);
an->sta = NULL;
#endif
if (sc->sc_ah->caps.hw_caps & ATH9K_HW_CAP_HT)
ath_tx_node_cleanup(sc, an);
}
void ath9k_tasklet(unsigned long data)
{
struct ath_softc *sc = (struct ath_softc *)data;
struct ath_hw *ah = sc->sc_ah;
struct ath_common *common = ath9k_hw_common(ah);
enum ath_reset_type type;
unsigned long flags;
u32 status = sc->intrstatus;
u32 rxmask;
ath9k_ps_wakeup(sc);
spin_lock(&sc->sc_pcu_lock);
if ((status & ATH9K_INT_FATAL) ||
(status & ATH9K_INT_BB_WATCHDOG)) {
if (status & ATH9K_INT_FATAL)
type = RESET_TYPE_FATAL_INT;
else
type = RESET_TYPE_BB_WATCHDOG;
ath9k_queue_reset(sc, type);
goto out;
}
spin_lock_irqsave(&sc->sc_pm_lock, flags);
if ((status & ATH9K_INT_TSFOOR) && sc->ps_enabled) {
/*
* TSF sync does not look correct; remain awake to sync with
* the next Beacon.
*/
ath_dbg(common, PS, "TSFOOR - Sync with next Beacon\n");
sc->ps_flags |= PS_WAIT_FOR_BEACON | PS_BEACON_SYNC;
}
spin_unlock_irqrestore(&sc->sc_pm_lock, flags);
if (ah->caps.hw_caps & ATH9K_HW_CAP_EDMA)
rxmask = (ATH9K_INT_RXHP | ATH9K_INT_RXLP | ATH9K_INT_RXEOL |
ATH9K_INT_RXORN);
else
rxmask = (ATH9K_INT_RX | ATH9K_INT_RXEOL | ATH9K_INT_RXORN);
if (status & rxmask) {
/* Check for high priority Rx first */
if ((ah->caps.hw_caps & ATH9K_HW_CAP_EDMA) &&
(status & ATH9K_INT_RXHP))
ath_rx_tasklet(sc, 0, true);
ath_rx_tasklet(sc, 0, false);
}
if (status & ATH9K_INT_TX) {
if (ah->caps.hw_caps & ATH9K_HW_CAP_EDMA)
ath_tx_edma_tasklet(sc);
else
ath_tx_tasklet(sc);
}
ath9k_btcoex_handle_interrupt(sc, status);
out:
/* re-enable hardware interrupt */
ath9k_hw_enable_interrupts(ah);
spin_unlock(&sc->sc_pcu_lock);
ath9k_ps_restore(sc);
}
irqreturn_t ath_isr(int irq, void *dev)
{
#define SCHED_INTR ( \
ATH9K_INT_FATAL | \
ATH9K_INT_BB_WATCHDOG | \
ATH9K_INT_RXORN | \
ATH9K_INT_RXEOL | \
ATH9K_INT_RX | \
ATH9K_INT_RXLP | \
ATH9K_INT_RXHP | \
ATH9K_INT_TX | \
ATH9K_INT_BMISS | \
ATH9K_INT_CST | \
ATH9K_INT_TSFOOR | \
ATH9K_INT_GENTIMER | \
ATH9K_INT_MCI)
struct ath_softc *sc = dev;
struct ath_hw *ah = sc->sc_ah;
struct ath_common *common = ath9k_hw_common(ah);
enum ath9k_int status;
bool sched = false;
/*
* The hardware is not ready/present, don't
* touch anything. Note this can happen early
* on if the IRQ is shared.
*/
if (test_bit(SC_OP_INVALID, &sc->sc_flags))
return IRQ_NONE;
/* shared irq, not for us */
if (!ath9k_hw_intrpend(ah))
return IRQ_NONE;
if (test_bit(SC_OP_HW_RESET, &sc->sc_flags)) {
ath9k_hw_kill_interrupts(ah);
return IRQ_HANDLED;
}
/*
* Figure out the reason(s) for the interrupt. Note
* that the hal returns a pseudo-ISR that may include
* bits we haven't explicitly enabled so we mask the
* value to insure we only process bits we requested.
*/
ath9k_hw_getisr(ah, &status); /* NB: clears ISR too */
status &= ah->imask; /* discard unasked-for bits */
/*
* If there are no status bits set, then this interrupt was not
* for me (should have been caught above).
*/
if (!status)
return IRQ_NONE;
/* Cache the status */
sc->intrstatus = status;
if (status & SCHED_INTR)
sched = true;
#ifdef CONFIG_PM_SLEEP
if (status & ATH9K_INT_BMISS) {
if (atomic_read(&sc->wow_sleep_proc_intr) == 0) {
ath_dbg(common, ANY, "during WoW we got a BMISS\n");
atomic_inc(&sc->wow_got_bmiss_intr);
atomic_dec(&sc->wow_sleep_proc_intr);
}
ath_dbg(common, INTERRUPT, "beacon miss interrupt\n");
}
#endif
/*
* If a FATAL or RXORN interrupt is received, we have to reset the
* chip immediately.
*/
if ((status & ATH9K_INT_FATAL) || ((status & ATH9K_INT_RXORN) &&
!(ah->caps.hw_caps & ATH9K_HW_CAP_EDMA)))
goto chip_reset;
if ((ah->caps.hw_caps & ATH9K_HW_CAP_EDMA) &&
(status & ATH9K_INT_BB_WATCHDOG)) {
spin_lock(&common->cc_lock);
ath_hw_cycle_counters_update(common);
ar9003_hw_bb_watchdog_dbg_info(ah);
spin_unlock(&common->cc_lock);
goto chip_reset;
}
if (status & ATH9K_INT_SWBA)
tasklet_schedule(&sc->bcon_tasklet);
if (status & ATH9K_INT_TXURN)
ath9k_hw_updatetxtriglevel(ah, true);
if (status & ATH9K_INT_RXEOL) {
ah->imask &= ~(ATH9K_INT_RXEOL | ATH9K_INT_RXORN);
ath9k_hw_set_interrupts(ah);
}
if (!(ah->caps.hw_caps & ATH9K_HW_CAP_AUTOSLEEP))
if (status & ATH9K_INT_TIM_TIMER) {
if (ATH_DBG_WARN_ON_ONCE(sc->ps_idle))
goto chip_reset;
/* Clear RxAbort bit so that we can
* receive frames */
ath9k_setpower(sc, ATH9K_PM_AWAKE);
spin_lock(&sc->sc_pm_lock);
ath9k_hw_setrxabort(sc->sc_ah, 0);
sc->ps_flags |= PS_WAIT_FOR_BEACON;
spin_unlock(&sc->sc_pm_lock);
}
chip_reset:
ath_debug_stat_interrupt(sc, status);
if (sched) {
/* turn off every interrupt */
ath9k_hw_disable_interrupts(ah);
tasklet_schedule(&sc->intr_tq);
}
return IRQ_HANDLED;
#undef SCHED_INTR
}
static int ath_reset(struct ath_softc *sc, bool retry_tx)
{
int r;
ath9k_ps_wakeup(sc);
r = ath_reset_internal(sc, NULL, retry_tx);
if (retry_tx) {
int i;
for (i = 0; i < ATH9K_NUM_TX_QUEUES; i++) {
if (ATH_TXQ_SETUP(sc, i)) {
spin_lock_bh(&sc->tx.txq[i].axq_lock);
ath_txq_schedule(sc, &sc->tx.txq[i]);
spin_unlock_bh(&sc->tx.txq[i].axq_lock);
}
}
}
ath9k_ps_restore(sc);
return r;
}
void ath9k_queue_reset(struct ath_softc *sc, enum ath_reset_type type)
{
#ifdef CONFIG_ATH9K_DEBUGFS
RESET_STAT_INC(sc, type);
#endif
set_bit(SC_OP_HW_RESET, &sc->sc_flags);
ieee80211_queue_work(sc->hw, &sc->hw_reset_work);
}
void ath_reset_work(struct work_struct *work)
{
struct ath_softc *sc = container_of(work, struct ath_softc, hw_reset_work);
ath_reset(sc, true);
}
/**********************/
/* mac80211 callbacks */
/**********************/
static int ath9k_start(struct ieee80211_hw *hw)
{
struct ath_softc *sc = hw->priv;
struct ath_hw *ah = sc->sc_ah;
struct ath_common *common = ath9k_hw_common(ah);
struct ieee80211_channel *curchan = hw->conf.channel;
struct ath9k_channel *init_channel;
int r;
ath_dbg(common, CONFIG,
"Starting driver with initial channel: %d MHz\n",
curchan->center_freq);
ath9k_ps_wakeup(sc);
mutex_lock(&sc->mutex);
init_channel = ath9k_cmn_get_curchannel(hw, ah);
/* Reset SERDES registers */
ath9k_hw_configpcipowersave(ah, false);
/*
* The basic interface to setting the hardware in a good
* state is ``reset''. On return the hardware is known to
* be powered up and with interrupts disabled. This must
* be followed by initialization of the appropriate bits
* and then setup of the interrupt mask.
*/
spin_lock_bh(&sc->sc_pcu_lock);
atomic_set(&ah->intr_ref_cnt, -1);
r = ath9k_hw_reset(ah, init_channel, ah->caldata, false);
if (r) {
ath_err(common,
"Unable to reset hardware; reset status %d (freq %u MHz)\n",
r, curchan->center_freq);
ah->reset_power_on = false;
}
/* Setup our intr mask. */
ah->imask = ATH9K_INT_TX | ATH9K_INT_RXEOL |
ATH9K_INT_RXORN | ATH9K_INT_FATAL |
ATH9K_INT_GLOBAL;
if (ah->caps.hw_caps & ATH9K_HW_CAP_EDMA)
ah->imask |= ATH9K_INT_RXHP |
ATH9K_INT_RXLP |
ATH9K_INT_BB_WATCHDOG;
else
ah->imask |= ATH9K_INT_RX;
ah->imask |= ATH9K_INT_GTT;
if (ah->caps.hw_caps & ATH9K_HW_CAP_HT)
ah->imask |= ATH9K_INT_CST;
ath_mci_enable(sc);
clear_bit(SC_OP_INVALID, &sc->sc_flags);
sc->sc_ah->is_monitoring = false;
if (!ath_complete_reset(sc, false))
ah->reset_power_on = false;
if (ah->led_pin >= 0) {
ath9k_hw_cfg_output(ah, ah->led_pin,
AR_GPIO_OUTPUT_MUX_AS_OUTPUT);
ath9k_hw_set_gpio(ah, ah->led_pin, 0);
}
/*
* Reset key cache to sane defaults (all entries cleared) instead of
* semi-random values after suspend/resume.
*/
ath9k_cmn_init_crypto(sc->sc_ah);
spin_unlock_bh(&sc->sc_pcu_lock);
mutex_unlock(&sc->mutex);
ath9k_ps_restore(sc);
return 0;
}
static void ath9k_tx(struct ieee80211_hw *hw,
struct ieee80211_tx_control *control,
struct sk_buff *skb)
{
struct ath_softc *sc = hw->priv;
struct ath_common *common = ath9k_hw_common(sc->sc_ah);
struct ath_tx_control txctl;
struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data;
unsigned long flags;
if (sc->ps_enabled) {
/*
* mac80211 does not set PM field for normal data frames, so we
* need to update that based on the current PS mode.
*/
if (ieee80211_is_data(hdr->frame_control) &&
!ieee80211_is_nullfunc(hdr->frame_control) &&
!ieee80211_has_pm(hdr->frame_control)) {
ath_dbg(common, PS,
"Add PM=1 for a TX frame while in PS mode\n");
hdr->frame_control |= cpu_to_le16(IEEE80211_FCTL_PM);
}
}
if (unlikely(sc->sc_ah->power_mode == ATH9K_PM_NETWORK_SLEEP)) {
/*
* We are using PS-Poll and mac80211 can request TX while in
* power save mode. Need to wake up hardware for the TX to be
* completed and if needed, also for RX of buffered frames.
*/
ath9k_ps_wakeup(sc);
spin_lock_irqsave(&sc->sc_pm_lock, flags);
if (!(sc->sc_ah->caps.hw_caps & ATH9K_HW_CAP_AUTOSLEEP))
ath9k_hw_setrxabort(sc->sc_ah, 0);
if (ieee80211_is_pspoll(hdr->frame_control)) {
ath_dbg(common, PS,
"Sending PS-Poll to pick a buffered frame\n");
sc->ps_flags |= PS_WAIT_FOR_PSPOLL_DATA;
} else {
ath_dbg(common, PS, "Wake up to complete TX\n");
sc->ps_flags |= PS_WAIT_FOR_TX_ACK;
}
/*
* The actual restore operation will happen only after
* the ps_flags bit is cleared. We are just dropping
* the ps_usecount here.
*/
spin_unlock_irqrestore(&sc->sc_pm_lock, flags);
ath9k_ps_restore(sc);
}
/*
* Cannot tx while the hardware is in full sleep, it first needs a full
* chip reset to recover from that
*/
if (unlikely(sc->sc_ah->power_mode == ATH9K_PM_FULL_SLEEP)) {
ath_err(common, "TX while HW is in FULL_SLEEP mode\n");
goto exit;
}
memset(&txctl, 0, sizeof(struct ath_tx_control));
ath9k: rework tx queue selection and fix queue stopping/waking The current ath9k tx queue handling code showed a few issues that could lead to locking issues, tx stalls due to stopped queues, and maybe even DMA issues. The main source of these issues is that in some places the queue is selected via skb queue mapping in places where this mapping may no longer be valid. One such place is when data frames are transmitted via the CAB queue (for powersave buffered frames). This is made even worse by a lookup WMM AC values from the assigned tx queue (which is undefined for the CAB queue). This messed up the pending frame counting, which in turn caused issues with queues getting stopped, but not woken again. To fix these issues, this patch removes an unnecessary abstraction separating a driver internal queue number from the skb queue number (not to be confused with the hardware queue number). It seems that this abstraction may have been necessary because of tx queue preinitialization from the initvals. This patch avoids breakage here by pushing the software <-> hardware queue mapping to the function that assigns the tx queues and redefining the WMM AC definitions to match the numbers used by mac80211 (also affects ath9k_htc). To ensure consistency wrt. pending frame count tracking, these counters are moved to the ath_txq struct, updated with the txq lock held, but only where the tx queue selected by the skb queue map actually matches the tx queue used by the driver for the frame. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Reported-by: Björn Smedman <bjorn.smedman@venatech.se> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-11-07 21:59:39 +08:00
txctl.txq = sc->tx.txq_map[skb_get_queue_mapping(skb)];
txctl.sta = control->sta;
ath_dbg(common, XMIT, "transmitting packet, skb: %p\n", skb);
if (ath_tx_start(hw, skb, &txctl) != 0) {
ath_dbg(common, XMIT, "TX failed\n");
TX_STAT_INC(txctl.txq->axq_qnum, txfailed);
goto exit;
}
return;
exit:
ieee80211_free_txskb(hw, skb);
}
static void ath9k_stop(struct ieee80211_hw *hw)
{
struct ath_softc *sc = hw->priv;
struct ath_hw *ah = sc->sc_ah;
struct ath_common *common = ath9k_hw_common(ah);
bool prev_idle;
mutex_lock(&sc->mutex);
ath_cancel_work(sc);
del_timer_sync(&sc->rx_poll_timer);
if (test_bit(SC_OP_INVALID, &sc->sc_flags)) {
ath_dbg(common, ANY, "Device not present\n");
mutex_unlock(&sc->mutex);
return;
}
/* Ensure HW is awake when we try to shut it down. */
ath9k_ps_wakeup(sc);
spin_lock_bh(&sc->sc_pcu_lock);
/* prevent tasklets to enable interrupts once we disable them */
ah->imask &= ~ATH9K_INT_GLOBAL;
/* make sure h/w will not generate any interrupt
* before setting the invalid flag. */
ath9k_hw_disable_interrupts(ah);
spin_unlock_bh(&sc->sc_pcu_lock);
/* we can now sync irq and kill any running tasklets, since we already
* disabled interrupts and not holding a spin lock */
synchronize_irq(sc->irq);
tasklet_kill(&sc->intr_tq);
tasklet_kill(&sc->bcon_tasklet);
prev_idle = sc->ps_idle;
sc->ps_idle = true;
spin_lock_bh(&sc->sc_pcu_lock);
if (ah->led_pin >= 0) {
ath9k_hw_set_gpio(ah, ah->led_pin, 1);
ath9k_hw_cfg_gpio_input(ah, ah->led_pin);
}
ath_prepare_reset(sc, false, true);
if (sc->rx.frag) {
dev_kfree_skb_any(sc->rx.frag);
sc->rx.frag = NULL;
}
if (!ah->curchan)
ah->curchan = ath9k_cmn_get_curchannel(hw, ah);
ath9k_hw_reset(ah, ah->curchan, ah->caldata, false);
ath9k_hw_phy_disable(ah);
ath9k_hw_configpcipowersave(ah, true);
spin_unlock_bh(&sc->sc_pcu_lock);
ath9k_ps_restore(sc);
set_bit(SC_OP_INVALID, &sc->sc_flags);
sc->ps_idle = prev_idle;
mutex_unlock(&sc->mutex);
ath_dbg(common, CONFIG, "Driver halt\n");
}
bool ath9k_uses_beacons(int type)
{
switch (type) {
case NL80211_IFTYPE_AP:
case NL80211_IFTYPE_ADHOC:
case NL80211_IFTYPE_MESH_POINT:
return true;
default:
return false;
}
}
static void ath9k_vif_iter(void *data, u8 *mac, struct ieee80211_vif *vif)
{
struct ath9k_vif_iter_data *iter_data = data;
int i;
if (iter_data->hw_macaddr)
for (i = 0; i < ETH_ALEN; i++)
iter_data->mask[i] &=
~(iter_data->hw_macaddr[i] ^ mac[i]);
switch (vif->type) {
case NL80211_IFTYPE_AP:
iter_data->naps++;
break;
case NL80211_IFTYPE_STATION:
iter_data->nstations++;
break;
case NL80211_IFTYPE_ADHOC:
iter_data->nadhocs++;
break;
case NL80211_IFTYPE_MESH_POINT:
iter_data->nmeshes++;
break;
case NL80211_IFTYPE_WDS:
iter_data->nwds++;
break;
default:
break;
}
}
static void ath9k_sta_vif_iter(void *data, u8 *mac, struct ieee80211_vif *vif)
{
struct ath_softc *sc = data;
struct ath_vif *avp = (void *)vif->drv_priv;
if (vif->type != NL80211_IFTYPE_STATION)
return;
if (avp->primary_sta_vif)
ath9k_set_assoc_state(sc, vif);
}
/* Called with sc->mutex held. */
void ath9k_calculate_iter_data(struct ieee80211_hw *hw,
struct ieee80211_vif *vif,
struct ath9k_vif_iter_data *iter_data)
{
struct ath_softc *sc = hw->priv;
struct ath_hw *ah = sc->sc_ah;
struct ath_common *common = ath9k_hw_common(ah);
/*
* Use the hardware MAC address as reference, the hardware uses it
* together with the BSSID mask when matching addresses.
*/
memset(iter_data, 0, sizeof(*iter_data));
iter_data->hw_macaddr = common->macaddr;
memset(&iter_data->mask, 0xff, ETH_ALEN);
if (vif)
ath9k_vif_iter(iter_data, vif->addr, vif);
/* Get list of all active MAC addresses */
ieee80211_iterate_active_interfaces_atomic(
sc->hw, IEEE80211_IFACE_ITER_RESUME_ALL,
ath9k_vif_iter, iter_data);
}
/* Called with sc->mutex held. */
static void ath9k_calculate_summary_state(struct ieee80211_hw *hw,
struct ieee80211_vif *vif)
{
struct ath_softc *sc = hw->priv;
struct ath_hw *ah = sc->sc_ah;
struct ath_common *common = ath9k_hw_common(ah);
struct ath9k_vif_iter_data iter_data;
enum nl80211_iftype old_opmode = ah->opmode;
ath9k_calculate_iter_data(hw, vif, &iter_data);
memcpy(common->bssidmask, iter_data.mask, ETH_ALEN);
ath_hw_setbssidmask(common);
if (iter_data.naps > 0) {
ath9k_hw_set_tsfadjust(ah, true);
ah->opmode = NL80211_IFTYPE_AP;
} else {
ath9k_hw_set_tsfadjust(ah, false);
if (iter_data.nmeshes)
ah->opmode = NL80211_IFTYPE_MESH_POINT;
else if (iter_data.nwds)
ah->opmode = NL80211_IFTYPE_AP;
else if (iter_data.nadhocs)
ah->opmode = NL80211_IFTYPE_ADHOC;
else
ah->opmode = NL80211_IFTYPE_STATION;
}
ath9k_hw_setopmode(ah);
if ((iter_data.nstations + iter_data.nadhocs + iter_data.nmeshes) > 0)
ah->imask |= ATH9K_INT_TSFOOR;
else
ah->imask &= ~ATH9K_INT_TSFOOR;
ath9k_hw_set_interrupts(ah);
/*
* If we are changing the opmode to STATION,
* a beacon sync needs to be done.
*/
if (ah->opmode == NL80211_IFTYPE_STATION &&
old_opmode == NL80211_IFTYPE_AP &&
test_bit(SC_OP_PRIM_STA_VIF, &sc->sc_flags)) {
ieee80211_iterate_active_interfaces_atomic(
sc->hw, IEEE80211_IFACE_ITER_RESUME_ALL,
ath9k_sta_vif_iter, sc);
}
}
static int ath9k_add_interface(struct ieee80211_hw *hw,
struct ieee80211_vif *vif)
{
struct ath_softc *sc = hw->priv;
struct ath_hw *ah = sc->sc_ah;
struct ath_common *common = ath9k_hw_common(ah);
mutex_lock(&sc->mutex);
ath_dbg(common, CONFIG, "Attach a VIF of type: %d\n", vif->type);
sc->nvifs++;
ath9k_ps_wakeup(sc);
ath9k_calculate_summary_state(hw, vif);
ath9k_ps_restore(sc);
if (ath9k_uses_beacons(vif->type))
ath9k_beacon_assign_slot(sc, vif);
mutex_unlock(&sc->mutex);
return 0;
}
static int ath9k_change_interface(struct ieee80211_hw *hw,
struct ieee80211_vif *vif,
enum nl80211_iftype new_type,
bool p2p)
{
struct ath_softc *sc = hw->priv;
struct ath_common *common = ath9k_hw_common(sc->sc_ah);
ath_dbg(common, CONFIG, "Change Interface\n");
mutex_lock(&sc->mutex);
if (ath9k_uses_beacons(vif->type))
ath9k_beacon_remove_slot(sc, vif);
vif->type = new_type;
vif->p2p = p2p;
ath9k_ps_wakeup(sc);
ath9k_calculate_summary_state(hw, vif);
ath9k_ps_restore(sc);
if (ath9k_uses_beacons(vif->type))
ath9k_beacon_assign_slot(sc, vif);
mutex_unlock(&sc->mutex);
return 0;
}
static void ath9k_remove_interface(struct ieee80211_hw *hw,
struct ieee80211_vif *vif)
{
struct ath_softc *sc = hw->priv;
struct ath_common *common = ath9k_hw_common(sc->sc_ah);
ath_dbg(common, CONFIG, "Detach Interface\n");
mutex_lock(&sc->mutex);
sc->nvifs--;
if (ath9k_uses_beacons(vif->type))
ath9k_beacon_remove_slot(sc, vif);
ath9k_ps_wakeup(sc);
ath9k_calculate_summary_state(hw, NULL);
ath9k_ps_restore(sc);
mutex_unlock(&sc->mutex);
}
static void ath9k_enable_ps(struct ath_softc *sc)
{
struct ath_hw *ah = sc->sc_ah;
struct ath_common *common = ath9k_hw_common(ah);
sc->ps_enabled = true;
if (!(ah->caps.hw_caps & ATH9K_HW_CAP_AUTOSLEEP)) {
if ((ah->imask & ATH9K_INT_TIM_TIMER) == 0) {
ah->imask |= ATH9K_INT_TIM_TIMER;
ath9k_hw_set_interrupts(ah);
}
ath9k_hw_setrxabort(ah, 1);
}
ath_dbg(common, PS, "PowerSave enabled\n");
}
static void ath9k_disable_ps(struct ath_softc *sc)
{
struct ath_hw *ah = sc->sc_ah;
struct ath_common *common = ath9k_hw_common(ah);
sc->ps_enabled = false;
ath9k_hw_setpower(ah, ATH9K_PM_AWAKE);
if (!(ah->caps.hw_caps & ATH9K_HW_CAP_AUTOSLEEP)) {
ath9k_hw_setrxabort(ah, 0);
sc->ps_flags &= ~(PS_WAIT_FOR_BEACON |
PS_WAIT_FOR_CAB |
PS_WAIT_FOR_PSPOLL_DATA |
PS_WAIT_FOR_TX_ACK);
if (ah->imask & ATH9K_INT_TIM_TIMER) {
ah->imask &= ~ATH9K_INT_TIM_TIMER;
ath9k_hw_set_interrupts(ah);
}
}
ath_dbg(common, PS, "PowerSave disabled\n");
}
static int ath9k_config(struct ieee80211_hw *hw, u32 changed)
{
struct ath_softc *sc = hw->priv;
struct ath_hw *ah = sc->sc_ah;
struct ath_common *common = ath9k_hw_common(ah);
struct ieee80211_conf *conf = &hw->conf;
bool reset_channel = false;
ath9k_ps_wakeup(sc);
mutex_lock(&sc->mutex);
if (changed & IEEE80211_CONF_CHANGE_IDLE) {
sc->ps_idle = !!(conf->flags & IEEE80211_CONF_IDLE);
if (sc->ps_idle) {
ath_cancel_work(sc);
ath9k_stop_btcoex(sc);
} else {
ath9k_start_btcoex(sc);
/*
* The chip needs a reset to properly wake up from
* full sleep
*/
reset_channel = ah->chip_fullsleep;
}
}
/*
* We just prepare to enable PS. We have to wait until our AP has
* ACK'd our null data frame to disable RX otherwise we'll ignore
* those ACKs and end up retransmitting the same null data frames.
* IEEE80211_CONF_CHANGE_PS is only passed by mac80211 for STA mode.
*/
if (changed & IEEE80211_CONF_CHANGE_PS) {
ath9k: fix power save race conditions ath9k has a race on putting the chip into network sleep and having registers read from hardware. The race occurs because although ath9k_ps_restore() locks its own callers it makes use of some variables which get altered in the driver at different code paths. The variables are the ps_enabled and ps_flags. This is easily reprodicible in large network environments when roaming with the wpa_supplicant simple bgscan. You'd get some 0xdeadbeef read out on certain registers such as: ath: timeout (100000 us) on reg 0x806c: 0xdeadbeef & 0x01f00000 != 0x00000000 ath: RX failed to go idle in 10 ms RXSM=0xdeadbeef ath: timeout (100000 us) on reg 0x7000: 0xdeadbeef & 0x00000003 != 0x00000000 ath: Chip reset failed The fix is to protect the ath9k_config(hw, IEEE80211_CONF_CHANGE_PS) calls with a spin_lock_irqsave() which will disable contendors for these variables from interrupt context, timers, re-entry from mac80211 on the same callback, and most importantly from ath9k_ps_restore() which is the only call which will put the device into network sleep. There are quite a few threads and bug reports on these a few of them are: https://bugs.launchpad.net/ubuntu/karmic/+source/linux/+bug/407040 http://code.google.com/p/chromium-os/issues/detail?id=5709 http://code.google.com/p/chromium-os/issues/detail?id=5943 Stable fixes apply to [2.6.32+] Cc: stable@kernel.org Cc: Paul Stewart <pstew@google.com> Cc: Amod Bodas <amod.bodas@atheros.com> Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-09-17 03:12:26 +08:00
unsigned long flags;
spin_lock_irqsave(&sc->sc_pm_lock, flags);
if (conf->flags & IEEE80211_CONF_PS)
ath9k_enable_ps(sc);
else
ath9k_disable_ps(sc);
ath9k: fix power save race conditions ath9k has a race on putting the chip into network sleep and having registers read from hardware. The race occurs because although ath9k_ps_restore() locks its own callers it makes use of some variables which get altered in the driver at different code paths. The variables are the ps_enabled and ps_flags. This is easily reprodicible in large network environments when roaming with the wpa_supplicant simple bgscan. You'd get some 0xdeadbeef read out on certain registers such as: ath: timeout (100000 us) on reg 0x806c: 0xdeadbeef & 0x01f00000 != 0x00000000 ath: RX failed to go idle in 10 ms RXSM=0xdeadbeef ath: timeout (100000 us) on reg 0x7000: 0xdeadbeef & 0x00000003 != 0x00000000 ath: Chip reset failed The fix is to protect the ath9k_config(hw, IEEE80211_CONF_CHANGE_PS) calls with a spin_lock_irqsave() which will disable contendors for these variables from interrupt context, timers, re-entry from mac80211 on the same callback, and most importantly from ath9k_ps_restore() which is the only call which will put the device into network sleep. There are quite a few threads and bug reports on these a few of them are: https://bugs.launchpad.net/ubuntu/karmic/+source/linux/+bug/407040 http://code.google.com/p/chromium-os/issues/detail?id=5709 http://code.google.com/p/chromium-os/issues/detail?id=5943 Stable fixes apply to [2.6.32+] Cc: stable@kernel.org Cc: Paul Stewart <pstew@google.com> Cc: Amod Bodas <amod.bodas@atheros.com> Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-09-17 03:12:26 +08:00
spin_unlock_irqrestore(&sc->sc_pm_lock, flags);
}
if (changed & IEEE80211_CONF_CHANGE_MONITOR) {
if (conf->flags & IEEE80211_CONF_MONITOR) {
ath_dbg(common, CONFIG, "Monitor mode is enabled\n");
sc->sc_ah->is_monitoring = true;
} else {
ath_dbg(common, CONFIG, "Monitor mode is disabled\n");
sc->sc_ah->is_monitoring = false;
}
}
if ((changed & IEEE80211_CONF_CHANGE_CHANNEL) || reset_channel) {
struct ieee80211_channel *curchan = hw->conf.channel;
int pos = curchan->hw_value;
int old_pos = -1;
unsigned long flags;
if (ah->curchan)
old_pos = ah->curchan - &ah->channels[0];
ath_dbg(common, CONFIG, "Set channel: %d MHz type: %d\n",
curchan->center_freq, conf->channel_type);
/* update survey stats for the old channel before switching */
spin_lock_irqsave(&common->cc_lock, flags);
ath_update_survey_stats(sc);
spin_unlock_irqrestore(&common->cc_lock, flags);
/*
* Preserve the current channel values, before updating
* the same channel
*/
if (ah->curchan && (old_pos == pos))
ath9k_hw_getnf(ah, ah->curchan);
ath9k_cmn_update_ichannel(&sc->sc_ah->channels[pos],
curchan, conf->channel_type);
/*
* If the operating channel changes, change the survey in-use flags
* along with it.
* Reset the survey data for the new channel, unless we're switching
* back to the operating channel from an off-channel operation.
*/
if (!(hw->conf.flags & IEEE80211_CONF_OFFCHANNEL) &&
sc->cur_survey != &sc->survey[pos]) {
if (sc->cur_survey)
sc->cur_survey->filled &= ~SURVEY_INFO_IN_USE;
sc->cur_survey = &sc->survey[pos];
memset(sc->cur_survey, 0, sizeof(struct survey_info));
sc->cur_survey->filled |= SURVEY_INFO_IN_USE;
} else if (!(sc->survey[pos].filled & SURVEY_INFO_IN_USE)) {
memset(&sc->survey[pos], 0, sizeof(struct survey_info));
}
if (ath_set_channel(sc, hw, &sc->sc_ah->channels[pos]) < 0) {
ath_err(common, "Unable to set channel\n");
mutex_unlock(&sc->mutex);
ath9k_ps_restore(sc);
return -EINVAL;
}
/*
* The most recent snapshot of channel->noisefloor for the old
* channel is only available after the hardware reset. Copy it to
* the survey stats now.
*/
if (old_pos >= 0)
ath_update_survey_nf(sc, old_pos);
}
if (changed & IEEE80211_CONF_CHANGE_POWER) {
ath_dbg(common, CONFIG, "Set power: %d\n", conf->power_level);
sc->config.txpowlimit = 2 * conf->power_level;
ath9k_cmn_update_txpow(ah, sc->curtxpow,
sc->config.txpowlimit, &sc->curtxpow);
}
mutex_unlock(&sc->mutex);
ath9k_ps_restore(sc);
return 0;
}
#define SUPPORTED_FILTERS \
(FIF_PROMISC_IN_BSS | \
FIF_ALLMULTI | \
FIF_CONTROL | \
FIF_PSPOLL | \
FIF_OTHER_BSS | \
FIF_BCN_PRBRESP_PROMISC | \
FIF_PROBE_REQ | \
FIF_FCSFAIL)
/* FIXME: sc->sc_full_reset ? */
static void ath9k_configure_filter(struct ieee80211_hw *hw,
unsigned int changed_flags,
unsigned int *total_flags,
u64 multicast)
{
struct ath_softc *sc = hw->priv;
u32 rfilt;
changed_flags &= SUPPORTED_FILTERS;
*total_flags &= SUPPORTED_FILTERS;
sc->rx.rxfilter = *total_flags;
ath9k_ps_wakeup(sc);
rfilt = ath_calcrxfilter(sc);
ath9k_hw_setrxfilter(sc->sc_ah, rfilt);
ath9k_ps_restore(sc);
ath_dbg(ath9k_hw_common(sc->sc_ah), CONFIG, "Set HW RX filter: 0x%x\n",
rfilt);
}
static int ath9k_sta_add(struct ieee80211_hw *hw,
struct ieee80211_vif *vif,
struct ieee80211_sta *sta)
{
struct ath_softc *sc = hw->priv;
struct ath_common *common = ath9k_hw_common(sc->sc_ah);
struct ath_node *an = (struct ath_node *) sta->drv_priv;
struct ieee80211_key_conf ps_key = { };
ath_node_attach(sc, sta, vif);
if (vif->type != NL80211_IFTYPE_AP &&
vif->type != NL80211_IFTYPE_AP_VLAN)
return 0;
an->ps_key = ath_key_config(common, vif, sta, &ps_key);
return 0;
}
static void ath9k_del_ps_key(struct ath_softc *sc,
struct ieee80211_vif *vif,
struct ieee80211_sta *sta)
{
struct ath_common *common = ath9k_hw_common(sc->sc_ah);
struct ath_node *an = (struct ath_node *) sta->drv_priv;
struct ieee80211_key_conf ps_key = { .hw_key_idx = an->ps_key };
if (!an->ps_key)
return;
ath_key_delete(common, &ps_key);
}
static int ath9k_sta_remove(struct ieee80211_hw *hw,
struct ieee80211_vif *vif,
struct ieee80211_sta *sta)
{
struct ath_softc *sc = hw->priv;
ath9k_del_ps_key(sc, vif, sta);
ath_node_detach(sc, sta);
return 0;
}
static void ath9k_sta_notify(struct ieee80211_hw *hw,
struct ieee80211_vif *vif,
enum sta_notify_cmd cmd,
struct ieee80211_sta *sta)
{
struct ath_softc *sc = hw->priv;
struct ath_node *an = (struct ath_node *) sta->drv_priv;
if (!sta->ht_cap.ht_supported)
ath9k: Fix kernel panic in AR2427 in AP mode don't do aggregation related stuff for 'AP mode client power save handling' if aggregation is not enabled in the driver, otherwise it will lead to panic because those data structures won't be never intialized in 'ath_tx_node_init' if aggregation is disabled EIP is at ath_tx_aggr_wakeup+0x37/0x80 [ath9k] EAX: e8c09a20 EBX: f2a304e8 ECX: 00000001 EDX: 00000000 ESI: e8c085e0 EDI: f2a304ac EBP: f40e1ca4 ESP: f40e1c8c DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068 Process swapper/1 (pid: 0, ti=f40e0000 task=f408e860 task.ti=f40dc000) Stack: 0001e966 e8c09a20 00000000 f2a304ac e8c085e0 f2a304ac f40e1cb0 f8186741 f8186700 f40e1d2c f922988d f2a304ac 00000202 00000001 c0b4ba43 00000000 0000000f e8eb75c0 e8c085e0 205b0001 34383220 f2a304ac f2a30000 00010020 Call Trace: [<f8186741>] ath9k_sta_notify+0x41/0x50 [ath9k] [<f8186700>] ? ath9k_get_survey+0x110/0x110 [ath9k] [<f922988d>] ieee80211_sta_ps_deliver_wakeup+0x9d/0x350 [mac80211] [<c018dc75>] ? __module_address+0x95/0xb0 [<f92465b3>] ap_sta_ps_end+0x63/0xa0 [mac80211] [<f9246746>] ieee80211_rx_h_sta_process+0x156/0x2b0 [mac80211] [<f9247d1e>] ieee80211_rx_handlers+0xce/0x510 [mac80211] [<c018440b>] ? trace_hardirqs_on+0xb/0x10 [<c056936e>] ? skb_queue_tail+0x3e/0x50 [<f9248271>] ieee80211_prepare_and_rx_handle+0x111/0x750 [mac80211] [<f9248bf9>] ieee80211_rx+0x349/0xb20 [mac80211] [<f9248949>] ? ieee80211_rx+0x99/0xb20 [mac80211] [<f818b0b8>] ath_rx_tasklet+0x818/0x1d00 [ath9k] [<f8187a75>] ? ath9k_tasklet+0x35/0x1c0 [ath9k] [<f8187a75>] ? ath9k_tasklet+0x35/0x1c0 [ath9k] [<f8187b33>] ath9k_tasklet+0xf3/0x1c0 [ath9k] [<c0151b7e>] tasklet_action+0xbe/0x180 Cc: stable@kernel.org Cc: Senthil Balasubramanian <senthilb@qca.qualcomm.com> Cc: Rajkumar Manoharan <rmanohar@qca.qualcomm.com> Reported-by: Ashwin Mendonca <ashwinloyal@gmail.com> Tested-by: Ashwin Mendonca <ashwinloyal@gmail.com> Signed-off-by: Mohammed Shafi Shajakhan <mohammed@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-12-26 13:12:15 +08:00
return;
switch (cmd) {
case STA_NOTIFY_SLEEP:
an->sleeping = true;
ath_tx_aggr_sleep(sta, sc, an);
break;
case STA_NOTIFY_AWAKE:
an->sleeping = false;
ath_tx_aggr_wakeup(sc, an);
break;
}
}
static int ath9k_conf_tx(struct ieee80211_hw *hw,
struct ieee80211_vif *vif, u16 queue,
const struct ieee80211_tx_queue_params *params)
{
struct ath_softc *sc = hw->priv;
struct ath_common *common = ath9k_hw_common(sc->sc_ah);
ath9k: rework tx queue selection and fix queue stopping/waking The current ath9k tx queue handling code showed a few issues that could lead to locking issues, tx stalls due to stopped queues, and maybe even DMA issues. The main source of these issues is that in some places the queue is selected via skb queue mapping in places where this mapping may no longer be valid. One such place is when data frames are transmitted via the CAB queue (for powersave buffered frames). This is made even worse by a lookup WMM AC values from the assigned tx queue (which is undefined for the CAB queue). This messed up the pending frame counting, which in turn caused issues with queues getting stopped, but not woken again. To fix these issues, this patch removes an unnecessary abstraction separating a driver internal queue number from the skb queue number (not to be confused with the hardware queue number). It seems that this abstraction may have been necessary because of tx queue preinitialization from the initvals. This patch avoids breakage here by pushing the software <-> hardware queue mapping to the function that assigns the tx queues and redefining the WMM AC definitions to match the numbers used by mac80211 (also affects ath9k_htc). To ensure consistency wrt. pending frame count tracking, these counters are moved to the ath_txq struct, updated with the txq lock held, but only where the tx queue selected by the skb queue map actually matches the tx queue used by the driver for the frame. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Reported-by: Björn Smedman <bjorn.smedman@venatech.se> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-11-07 21:59:39 +08:00
struct ath_txq *txq;
struct ath9k_tx_queue_info qi;
ath9k: rework tx queue selection and fix queue stopping/waking The current ath9k tx queue handling code showed a few issues that could lead to locking issues, tx stalls due to stopped queues, and maybe even DMA issues. The main source of these issues is that in some places the queue is selected via skb queue mapping in places where this mapping may no longer be valid. One such place is when data frames are transmitted via the CAB queue (for powersave buffered frames). This is made even worse by a lookup WMM AC values from the assigned tx queue (which is undefined for the CAB queue). This messed up the pending frame counting, which in turn caused issues with queues getting stopped, but not woken again. To fix these issues, this patch removes an unnecessary abstraction separating a driver internal queue number from the skb queue number (not to be confused with the hardware queue number). It seems that this abstraction may have been necessary because of tx queue preinitialization from the initvals. This patch avoids breakage here by pushing the software <-> hardware queue mapping to the function that assigns the tx queues and redefining the WMM AC definitions to match the numbers used by mac80211 (also affects ath9k_htc). To ensure consistency wrt. pending frame count tracking, these counters are moved to the ath_txq struct, updated with the txq lock held, but only where the tx queue selected by the skb queue map actually matches the tx queue used by the driver for the frame. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Reported-by: Björn Smedman <bjorn.smedman@venatech.se> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-11-07 21:59:39 +08:00
int ret = 0;
if (queue >= WME_NUM_AC)
return 0;
ath9k: rework tx queue selection and fix queue stopping/waking The current ath9k tx queue handling code showed a few issues that could lead to locking issues, tx stalls due to stopped queues, and maybe even DMA issues. The main source of these issues is that in some places the queue is selected via skb queue mapping in places where this mapping may no longer be valid. One such place is when data frames are transmitted via the CAB queue (for powersave buffered frames). This is made even worse by a lookup WMM AC values from the assigned tx queue (which is undefined for the CAB queue). This messed up the pending frame counting, which in turn caused issues with queues getting stopped, but not woken again. To fix these issues, this patch removes an unnecessary abstraction separating a driver internal queue number from the skb queue number (not to be confused with the hardware queue number). It seems that this abstraction may have been necessary because of tx queue preinitialization from the initvals. This patch avoids breakage here by pushing the software <-> hardware queue mapping to the function that assigns the tx queues and redefining the WMM AC definitions to match the numbers used by mac80211 (also affects ath9k_htc). To ensure consistency wrt. pending frame count tracking, these counters are moved to the ath_txq struct, updated with the txq lock held, but only where the tx queue selected by the skb queue map actually matches the tx queue used by the driver for the frame. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Reported-by: Björn Smedman <bjorn.smedman@venatech.se> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-11-07 21:59:39 +08:00
txq = sc->tx.txq_map[queue];
ath9k_ps_wakeup(sc);
mutex_lock(&sc->mutex);
memset(&qi, 0, sizeof(struct ath9k_tx_queue_info));
qi.tqi_aifs = params->aifs;
qi.tqi_cwmin = params->cw_min;
qi.tqi_cwmax = params->cw_max;
qi.tqi_burstTime = params->txop * 32;
ath_dbg(common, CONFIG,
"Configure tx [queue/halq] [%d/%d], aifs: %d, cw_min: %d, cw_max: %d, txop: %d\n",
queue, txq->axq_qnum, params->aifs, params->cw_min,
params->cw_max, params->txop);
ath_update_max_aggr_framelen(sc, queue, qi.tqi_burstTime);
ath9k: rework tx queue selection and fix queue stopping/waking The current ath9k tx queue handling code showed a few issues that could lead to locking issues, tx stalls due to stopped queues, and maybe even DMA issues. The main source of these issues is that in some places the queue is selected via skb queue mapping in places where this mapping may no longer be valid. One such place is when data frames are transmitted via the CAB queue (for powersave buffered frames). This is made even worse by a lookup WMM AC values from the assigned tx queue (which is undefined for the CAB queue). This messed up the pending frame counting, which in turn caused issues with queues getting stopped, but not woken again. To fix these issues, this patch removes an unnecessary abstraction separating a driver internal queue number from the skb queue number (not to be confused with the hardware queue number). It seems that this abstraction may have been necessary because of tx queue preinitialization from the initvals. This patch avoids breakage here by pushing the software <-> hardware queue mapping to the function that assigns the tx queues and redefining the WMM AC definitions to match the numbers used by mac80211 (also affects ath9k_htc). To ensure consistency wrt. pending frame count tracking, these counters are moved to the ath_txq struct, updated with the txq lock held, but only where the tx queue selected by the skb queue map actually matches the tx queue used by the driver for the frame. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Reported-by: Björn Smedman <bjorn.smedman@venatech.se> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-11-07 21:59:39 +08:00
ret = ath_txq_update(sc, txq->axq_qnum, &qi);
if (ret)
ath_err(common, "TXQ Update failed\n");
mutex_unlock(&sc->mutex);
ath9k_ps_restore(sc);
return ret;
}
static int ath9k_set_key(struct ieee80211_hw *hw,
enum set_key_cmd cmd,
struct ieee80211_vif *vif,
struct ieee80211_sta *sta,
struct ieee80211_key_conf *key)
{
struct ath_softc *sc = hw->priv;
struct ath_common *common = ath9k_hw_common(sc->sc_ah);
int ret = 0;
if (ath9k_modparam_nohwcrypt)
return -ENOSPC;
if ((vif->type == NL80211_IFTYPE_ADHOC ||
vif->type == NL80211_IFTYPE_MESH_POINT) &&
(key->cipher == WLAN_CIPHER_SUITE_TKIP ||
key->cipher == WLAN_CIPHER_SUITE_CCMP) &&
!(key->flags & IEEE80211_KEY_FLAG_PAIRWISE)) {
/*
* For now, disable hw crypto for the RSN IBSS group keys. This
* could be optimized in the future to use a modified key cache
* design to support per-STA RX GTK, but until that gets
* implemented, use of software crypto for group addressed
* frames is a acceptable to allow RSN IBSS to be used.
*/
return -EOPNOTSUPP;
}
mutex_lock(&sc->mutex);
ath9k_ps_wakeup(sc);
ath_dbg(common, CONFIG, "Set HW Key\n");
switch (cmd) {
case SET_KEY:
if (sta)
ath9k_del_ps_key(sc, vif, sta);
ret = ath_key_config(common, vif, sta, key);
if (ret >= 0) {
key->hw_key_idx = ret;
/* push IV and Michael MIC generation to stack */
key->flags |= IEEE80211_KEY_FLAG_GENERATE_IV;
if (key->cipher == WLAN_CIPHER_SUITE_TKIP)
key->flags |= IEEE80211_KEY_FLAG_GENERATE_MMIC;
if (sc->sc_ah->sw_mgmt_crypto &&
key->cipher == WLAN_CIPHER_SUITE_CCMP)
key->flags |= IEEE80211_KEY_FLAG_SW_MGMT_TX;
ret = 0;
}
break;
case DISABLE_KEY:
ath_key_delete(common, key);
break;
default:
ret = -EINVAL;
}
ath9k_ps_restore(sc);
mutex_unlock(&sc->mutex);
return ret;
}
static void ath9k_set_assoc_state(struct ath_softc *sc,
struct ieee80211_vif *vif)
{
struct ath_common *common = ath9k_hw_common(sc->sc_ah);
struct ath_vif *avp = (void *)vif->drv_priv;
struct ieee80211_bss_conf *bss_conf = &vif->bss_conf;
unsigned long flags;
set_bit(SC_OP_PRIM_STA_VIF, &sc->sc_flags);
avp->primary_sta_vif = true;
/*
* Set the AID, BSSID and do beacon-sync only when
* the HW opmode is STATION.
*
* But the primary bit is set above in any case.
*/
if (sc->sc_ah->opmode != NL80211_IFTYPE_STATION)
return;
memcpy(common->curbssid, bss_conf->bssid, ETH_ALEN);
common->curaid = bss_conf->aid;
ath9k_hw_write_associd(sc->sc_ah);
sc->last_rssi = ATH_RSSI_DUMMY_MARKER;
sc->sc_ah->stats.avgbrssi = ATH_RSSI_DUMMY_MARKER;
spin_lock_irqsave(&sc->sc_pm_lock, flags);
sc->ps_flags |= PS_BEACON_SYNC | PS_WAIT_FOR_BEACON;
spin_unlock_irqrestore(&sc->sc_pm_lock, flags);
if (ath9k_hw_mci_is_enabled(sc->sc_ah))
ath9k_mci_update_wlan_channels(sc, false);
ath_dbg(common, CONFIG,
"Primary Station interface: %pM, BSSID: %pM\n",
vif->addr, common->curbssid);
}
static void ath9k_bss_assoc_iter(void *data, u8 *mac, struct ieee80211_vif *vif)
{
struct ath_softc *sc = data;
struct ieee80211_bss_conf *bss_conf = &vif->bss_conf;
if (test_bit(SC_OP_PRIM_STA_VIF, &sc->sc_flags))
return;
if (bss_conf->assoc)
ath9k_set_assoc_state(sc, vif);
}
static void ath9k_bss_info_changed(struct ieee80211_hw *hw,
struct ieee80211_vif *vif,
struct ieee80211_bss_conf *bss_conf,
u32 changed)
{
#define CHECK_ANI \
(BSS_CHANGED_ASSOC | \
BSS_CHANGED_IBSS | \
BSS_CHANGED_BEACON_ENABLED)
struct ath_softc *sc = hw->priv;
struct ath_hw *ah = sc->sc_ah;
struct ath_common *common = ath9k_hw_common(ah);
struct ath_vif *avp = (void *)vif->drv_priv;
int slottime;
ath9k_ps_wakeup(sc);
mutex_lock(&sc->mutex);
if (changed & BSS_CHANGED_ASSOC) {
ath_dbg(common, CONFIG, "BSSID %pM Changed ASSOC %d\n",
bss_conf->bssid, bss_conf->assoc);
if (avp->primary_sta_vif && !bss_conf->assoc) {
clear_bit(SC_OP_PRIM_STA_VIF, &sc->sc_flags);
avp->primary_sta_vif = false;
if (ah->opmode == NL80211_IFTYPE_STATION)
clear_bit(SC_OP_BEACONS, &sc->sc_flags);
}
ieee80211_iterate_active_interfaces_atomic(
sc->hw, IEEE80211_IFACE_ITER_RESUME_ALL,
ath9k_bss_assoc_iter, sc);
if (!test_bit(SC_OP_PRIM_STA_VIF, &sc->sc_flags) &&
ah->opmode == NL80211_IFTYPE_STATION) {
memset(common->curbssid, 0, ETH_ALEN);
common->curaid = 0;
ath9k_hw_write_associd(sc->sc_ah);
if (ath9k_hw_mci_is_enabled(sc->sc_ah))
ath9k_mci_update_wlan_channels(sc, true);
}
}
if (changed & BSS_CHANGED_IBSS) {
memcpy(common->curbssid, bss_conf->bssid, ETH_ALEN);
common->curaid = bss_conf->aid;
ath9k_hw_write_associd(sc->sc_ah);
}
if ((changed & BSS_CHANGED_BEACON_ENABLED) ||
(changed & BSS_CHANGED_BEACON_INT)) {
if (ah->opmode == NL80211_IFTYPE_AP &&
bss_conf->enable_beacon)
ath9k_set_tsfadjust(sc, vif);
if (ath9k_allow_beacon_config(sc, vif))
ath9k_beacon_config(sc, vif, changed);
}
if (changed & BSS_CHANGED_ERP_SLOT) {
if (bss_conf->use_short_slot)
slottime = 9;
else
slottime = 20;
if (vif->type == NL80211_IFTYPE_AP) {
/*
* Defer update, so that connected stations can adjust
* their settings at the same time.
* See beacon.c for more details
*/
sc->beacon.slottime = slottime;
sc->beacon.updateslot = UPDATE;
} else {
ah->slottime = slottime;
ath9k_hw_init_global_settings(ah);
}
}
if (changed & CHECK_ANI)
ath_check_ani(sc);
mutex_unlock(&sc->mutex);
ath9k_ps_restore(sc);
#undef CHECK_ANI
}
static u64 ath9k_get_tsf(struct ieee80211_hw *hw, struct ieee80211_vif *vif)
{
struct ath_softc *sc = hw->priv;
u64 tsf;
mutex_lock(&sc->mutex);
ath9k_ps_wakeup(sc);
tsf = ath9k_hw_gettsf64(sc->sc_ah);
ath9k_ps_restore(sc);
mutex_unlock(&sc->mutex);
return tsf;
}
static void ath9k_set_tsf(struct ieee80211_hw *hw,
struct ieee80211_vif *vif,
u64 tsf)
{
struct ath_softc *sc = hw->priv;
mutex_lock(&sc->mutex);
ath9k_ps_wakeup(sc);
ath9k_hw_settsf64(sc->sc_ah, tsf);
ath9k_ps_restore(sc);
mutex_unlock(&sc->mutex);
}
static void ath9k_reset_tsf(struct ieee80211_hw *hw, struct ieee80211_vif *vif)
{
struct ath_softc *sc = hw->priv;
mutex_lock(&sc->mutex);
ath9k_ps_wakeup(sc);
ath9k_hw_reset_tsf(sc->sc_ah);
ath9k_ps_restore(sc);
mutex_unlock(&sc->mutex);
}
static int ath9k_ampdu_action(struct ieee80211_hw *hw,
struct ieee80211_vif *vif,
enum ieee80211_ampdu_mlme_action action,
struct ieee80211_sta *sta,
u16 tid, u16 *ssn, u8 buf_size)
{
struct ath_softc *sc = hw->priv;
int ret = 0;
local_bh_disable();
switch (action) {
case IEEE80211_AMPDU_RX_START:
break;
case IEEE80211_AMPDU_RX_STOP:
break;
case IEEE80211_AMPDU_TX_START:
ath9k_ps_wakeup(sc);
ret = ath_tx_aggr_start(sc, sta, tid, ssn);
if (!ret)
ieee80211_start_tx_ba_cb_irqsafe(vif, sta->addr, tid);
ath9k_ps_restore(sc);
break;
case IEEE80211_AMPDU_TX_STOP:
ath9k_ps_wakeup(sc);
ath_tx_aggr_stop(sc, sta, tid);
ieee80211_stop_tx_ba_cb_irqsafe(vif, sta->addr, tid);
ath9k_ps_restore(sc);
break;
case IEEE80211_AMPDU_TX_OPERATIONAL:
ath9k_ps_wakeup(sc);
ath_tx_aggr_resume(sc, sta, tid);
ath9k_ps_restore(sc);
break;
default:
ath_err(ath9k_hw_common(sc->sc_ah), "Unknown AMPDU action\n");
}
local_bh_enable();
return ret;
}
static int ath9k_get_survey(struct ieee80211_hw *hw, int idx,
struct survey_info *survey)
{
struct ath_softc *sc = hw->priv;
struct ath_common *common = ath9k_hw_common(sc->sc_ah);
struct ieee80211_supported_band *sband;
struct ieee80211_channel *chan;
unsigned long flags;
int pos;
spin_lock_irqsave(&common->cc_lock, flags);
if (idx == 0)
ath_update_survey_stats(sc);
sband = hw->wiphy->bands[IEEE80211_BAND_2GHZ];
if (sband && idx >= sband->n_channels) {
idx -= sband->n_channels;
sband = NULL;
}
if (!sband)
sband = hw->wiphy->bands[IEEE80211_BAND_5GHZ];
if (!sband || idx >= sband->n_channels) {
spin_unlock_irqrestore(&common->cc_lock, flags);
return -ENOENT;
}
chan = &sband->channels[idx];
pos = chan->hw_value;
memcpy(survey, &sc->survey[pos], sizeof(*survey));
survey->channel = chan;
spin_unlock_irqrestore(&common->cc_lock, flags);
return 0;
}
static void ath9k_set_coverage_class(struct ieee80211_hw *hw, u8 coverage_class)
{
struct ath_softc *sc = hw->priv;
struct ath_hw *ah = sc->sc_ah;
mutex_lock(&sc->mutex);
ah->coverage_class = coverage_class;
ath9k_ps_wakeup(sc);
ath9k_hw_init_global_settings(ah);
ath9k_ps_restore(sc);
mutex_unlock(&sc->mutex);
}
static void ath9k_flush(struct ieee80211_hw *hw, bool drop)
{
struct ath_softc *sc = hw->priv;
ath9k: Fix a warning due to a queued work during S3 state during suspend/S3 state drv_flush is called from mac80211 irrespective of interface count. In ath9k we queue a work in ath9k_flush which we expect to be cancelled in the drv_stop call back. during suspend process mac80211 calls drv_stop only when the interface count(local->count) is non-zero. unfortunately when the network manager is enabled, drv_flush is called while drv_stop is not called as local->count reaches '0'. So fix this by simply checking for the device presence in the drv_flush call back in the driver before queueing work or anything else. this patch fixes the following WARNING Call Trace: [<c014c6e2>] warn_slowpath_common+0x72/0xa0 [<fc133f99>] ? ieee80211_can_queue_work+0x39/0x50 [mac80211] [<fc133f99>] ? ieee80211_can_queue_work+0x39/0x50 [mac80211] [<c014c75b>] warn_slowpath_fmt+0x2b/0x30 [<fc133f99>] ieee80211_can_queue_work+0x39/0x50 [mac80211] [<fc134ed1>] ieee80211_queue_delayed_work+0x21/0x50 [mac80211] [<fc1e5b22>] ath_tx_complete_poll_work+0xb2/0x100 [ath9k] [<c016399e>] run_workqueue+0x8e/0x150 [<fc1e5a70>] ? ath_tx_complete_poll_work+0x0/0x100 [ath9k] [<c0163ae4>] worker_thread+0x84/0xe0 [<c0167a60>] ? autoremove_wake_function+0x0/0x50 [<c0163a60>] ? worker_thread+0x0/0xe0 [<c01677d4>] kthread+0x74/0x80 [<c0167760>] ? kthread+0x0/0x80 [<c0104087>] kernel_thread_helper+0x7/0x10 ---[ end trace 2aff81010df9215b ]--- Signed-off-by: Rajkumar Manoharan <rmanoharan@atheros.com> Signed-off-by: Mohammed Shafi Shajakhan <mshajakhan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-06 23:13:11 +08:00
struct ath_hw *ah = sc->sc_ah;
struct ath_common *common = ath9k_hw_common(ah);
int timeout = 200; /* ms */
int i, j;
bool drain_txq;
mutex_lock(&sc->mutex);
cancel_delayed_work_sync(&sc->tx_complete_work);
ath9k: Fix kernel panic on unplugging the device when the device is yanked out ath_pci_remove starts doing the cleanups, unregistering the hardware etc. so we should bail out immediately when we get drv_flush callback from mac80211 when the card is being unplugged. the panic occurs after we had associated to an AP. EIP: 0060:[<fb315b00>] EFLAGS: 00010246 CPU: 0 EIP is at ath_reset+0xa0/0x1c0 [ath9k] EAX: 00000000 EBX: 000697c0 ECX: 00000002 EDX: f3c3ccf0 ESI: 00000000 EDI: 00000000 EBP: f43e7b78 ESP: f43e7b50 DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068 Process kworker/u:2 (pid: 182, ti=f43e6000 task=f3c3c7c0 task.ti=f43e6000) Stack: 0000002a 00000000 00000000 003e7b78 0000000f eaaa8500 ffffffea eaaa97c0 eaaaa000 00000001 f43e7ba8 fb315d23 f99e7721 ecece680 eaaac738 eaaa8500 eaaaa020 000000c8 000000c8 00000000 eaaa8d58 eaaa8500 f43e7bd0 fb080b29 Call Trace: [<fb315d23>] ath9k_flush+0x103/0x170 [ath9k] [<fb080b29>] __ieee80211_recalc_idle+0x2c9/0x400 [mac80211] [<fb080c8e>] ieee80211_recalc_idle+0x2e/0x60 [mac80211] [<fb07aa73>] ieee80211_mgd_deauth+0x173/0x210 [mac80211] [<fb084559>] ieee80211_deauth+0x19/0x20 [mac80211] [<f99dda53>] __cfg80211_mlme_deauth+0xf3/0x140 [cfg80211] [<c0633d00>] ? __mutex_lock_common+0x1f0/0x380 [<f99e1b5d>] __cfg80211_disconnect+0x18d/0x1f0 [cfg80211] [<f99c8199>] cfg80211_netdev_notifier_call+0x159/0x5c0 [cfg80211] [<c0608a64>] ? packet_notifier+0x174/0x1f0 [<c0639202>] notifier_call_chain+0x82/0xb0 [<c0170d8f>] raw_notifier_call_chain+0x1f/0x30 [<c053b86c>] call_netdevice_notifiers+0x2c/0x60 [<c0182184>] ? trace_hardirqs_on_caller+0xf4/0x180 [<c053b8ec>] __dev_close_many+0x4c/0xd0 [<c053ba2d>] dev_close_many+0x6d/0xc0 [<c053bb53>] rollback_registered_many+0x93/0x1c0 [<c018221b>] ? trace_hardirqs_on+0xb/0x10 [<c053bc95>] unregister_netdevice_many+0x15/0x50 [<fb07f83b>] ieee80211_remove_interfaces+0x7b/0xb0 [mac80211] [<fb06a14b>] ieee80211_unregister_hw+0x4b/0x110 [mac80211] [<fb311a4a>] ath9k_deinit_device+0x3a/0x60 [ath9k] [<fb31eed6>] ath_pci_remove+0x46/0x90 [ath9k] [<c03b4ac4>] pci_device_remove+0x44/0x100 [<c043eb54>] __device_release_driver+0x64/0xb0 [<c043ec67>] device_release_driver+0x27/0x40 [<c043deeb>] bus_remove_device+0x7b/0xa0 [<c043c491>] device_del+0xf1/0x180 [<c043c530>] device_unregister+0x10/0x20 [<c03afafe>] pci_stop_bus_device+0x6e/0x80 [<c03afb72>] pci_remove_bus_device+0x12/0xa0 [<c03c2f29>] pciehp_unconfigure_device+0x89/0x180 [<c0181e54>] ? mark_held_locks+0x64/0x100 [<c063390f>] ? __mutex_unlock_slowpath+0xaf/0x140 [<c03c1f84>] pciehp_disable_slot+0x64/0x1b0 [<c03c2850>] pciehp_power_thread+0xd0/0x100 [<c0164ad0>] ? process_one_work+0x100/0x4d0 [<c0164b4c>] process_one_work+0x17c/0x4d0 [<c0164ad0>] ? process_one_work+0x100/0x4d0 [<c03c2780>] ? queue_interrupt_event+0xa0/0xa0 [<c01662bb>] worker_thread+0x13b/0x320 [<c018221b>] ? trace_hardirqs_on+0xb/0x10 [<c0166180>] ? manage_workers+0x1e0/0x1e0 [<c016a654>] kthread+0x84/0x90 [<c016a5d0>] ? __init_kthread_worker+0x60/0x60 [<c063d106>] kernel_thread_helper+0x6/0x10 Cc: Rajkumar Manoharan <rmanohar@qca.qualcomm.com> Signed-off-by: Mohammed Shafi Shajakhan <mohammed@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-09-09 13:11:08 +08:00
if (ah->ah_flags & AH_UNPLUGGED) {
ath_dbg(common, ANY, "Device has been unplugged!\n");
ath9k: Fix kernel panic on unplugging the device when the device is yanked out ath_pci_remove starts doing the cleanups, unregistering the hardware etc. so we should bail out immediately when we get drv_flush callback from mac80211 when the card is being unplugged. the panic occurs after we had associated to an AP. EIP: 0060:[<fb315b00>] EFLAGS: 00010246 CPU: 0 EIP is at ath_reset+0xa0/0x1c0 [ath9k] EAX: 00000000 EBX: 000697c0 ECX: 00000002 EDX: f3c3ccf0 ESI: 00000000 EDI: 00000000 EBP: f43e7b78 ESP: f43e7b50 DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068 Process kworker/u:2 (pid: 182, ti=f43e6000 task=f3c3c7c0 task.ti=f43e6000) Stack: 0000002a 00000000 00000000 003e7b78 0000000f eaaa8500 ffffffea eaaa97c0 eaaaa000 00000001 f43e7ba8 fb315d23 f99e7721 ecece680 eaaac738 eaaa8500 eaaaa020 000000c8 000000c8 00000000 eaaa8d58 eaaa8500 f43e7bd0 fb080b29 Call Trace: [<fb315d23>] ath9k_flush+0x103/0x170 [ath9k] [<fb080b29>] __ieee80211_recalc_idle+0x2c9/0x400 [mac80211] [<fb080c8e>] ieee80211_recalc_idle+0x2e/0x60 [mac80211] [<fb07aa73>] ieee80211_mgd_deauth+0x173/0x210 [mac80211] [<fb084559>] ieee80211_deauth+0x19/0x20 [mac80211] [<f99dda53>] __cfg80211_mlme_deauth+0xf3/0x140 [cfg80211] [<c0633d00>] ? __mutex_lock_common+0x1f0/0x380 [<f99e1b5d>] __cfg80211_disconnect+0x18d/0x1f0 [cfg80211] [<f99c8199>] cfg80211_netdev_notifier_call+0x159/0x5c0 [cfg80211] [<c0608a64>] ? packet_notifier+0x174/0x1f0 [<c0639202>] notifier_call_chain+0x82/0xb0 [<c0170d8f>] raw_notifier_call_chain+0x1f/0x30 [<c053b86c>] call_netdevice_notifiers+0x2c/0x60 [<c0182184>] ? trace_hardirqs_on_caller+0xf4/0x180 [<c053b8ec>] __dev_close_many+0x4c/0xd0 [<c053ba2d>] dev_close_many+0x6d/0xc0 [<c053bb53>] rollback_registered_many+0x93/0x1c0 [<c018221b>] ? trace_hardirqs_on+0xb/0x10 [<c053bc95>] unregister_netdevice_many+0x15/0x50 [<fb07f83b>] ieee80211_remove_interfaces+0x7b/0xb0 [mac80211] [<fb06a14b>] ieee80211_unregister_hw+0x4b/0x110 [mac80211] [<fb311a4a>] ath9k_deinit_device+0x3a/0x60 [ath9k] [<fb31eed6>] ath_pci_remove+0x46/0x90 [ath9k] [<c03b4ac4>] pci_device_remove+0x44/0x100 [<c043eb54>] __device_release_driver+0x64/0xb0 [<c043ec67>] device_release_driver+0x27/0x40 [<c043deeb>] bus_remove_device+0x7b/0xa0 [<c043c491>] device_del+0xf1/0x180 [<c043c530>] device_unregister+0x10/0x20 [<c03afafe>] pci_stop_bus_device+0x6e/0x80 [<c03afb72>] pci_remove_bus_device+0x12/0xa0 [<c03c2f29>] pciehp_unconfigure_device+0x89/0x180 [<c0181e54>] ? mark_held_locks+0x64/0x100 [<c063390f>] ? __mutex_unlock_slowpath+0xaf/0x140 [<c03c1f84>] pciehp_disable_slot+0x64/0x1b0 [<c03c2850>] pciehp_power_thread+0xd0/0x100 [<c0164ad0>] ? process_one_work+0x100/0x4d0 [<c0164b4c>] process_one_work+0x17c/0x4d0 [<c0164ad0>] ? process_one_work+0x100/0x4d0 [<c03c2780>] ? queue_interrupt_event+0xa0/0xa0 [<c01662bb>] worker_thread+0x13b/0x320 [<c018221b>] ? trace_hardirqs_on+0xb/0x10 [<c0166180>] ? manage_workers+0x1e0/0x1e0 [<c016a654>] kthread+0x84/0x90 [<c016a5d0>] ? __init_kthread_worker+0x60/0x60 [<c063d106>] kernel_thread_helper+0x6/0x10 Cc: Rajkumar Manoharan <rmanohar@qca.qualcomm.com> Signed-off-by: Mohammed Shafi Shajakhan <mohammed@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-09-09 13:11:08 +08:00
mutex_unlock(&sc->mutex);
return;
}
if (test_bit(SC_OP_INVALID, &sc->sc_flags)) {
ath_dbg(common, ANY, "Device not present\n");
ath9k: Fix a warning due to a queued work during S3 state during suspend/S3 state drv_flush is called from mac80211 irrespective of interface count. In ath9k we queue a work in ath9k_flush which we expect to be cancelled in the drv_stop call back. during suspend process mac80211 calls drv_stop only when the interface count(local->count) is non-zero. unfortunately when the network manager is enabled, drv_flush is called while drv_stop is not called as local->count reaches '0'. So fix this by simply checking for the device presence in the drv_flush call back in the driver before queueing work or anything else. this patch fixes the following WARNING Call Trace: [<c014c6e2>] warn_slowpath_common+0x72/0xa0 [<fc133f99>] ? ieee80211_can_queue_work+0x39/0x50 [mac80211] [<fc133f99>] ? ieee80211_can_queue_work+0x39/0x50 [mac80211] [<c014c75b>] warn_slowpath_fmt+0x2b/0x30 [<fc133f99>] ieee80211_can_queue_work+0x39/0x50 [mac80211] [<fc134ed1>] ieee80211_queue_delayed_work+0x21/0x50 [mac80211] [<fc1e5b22>] ath_tx_complete_poll_work+0xb2/0x100 [ath9k] [<c016399e>] run_workqueue+0x8e/0x150 [<fc1e5a70>] ? ath_tx_complete_poll_work+0x0/0x100 [ath9k] [<c0163ae4>] worker_thread+0x84/0xe0 [<c0167a60>] ? autoremove_wake_function+0x0/0x50 [<c0163a60>] ? worker_thread+0x0/0xe0 [<c01677d4>] kthread+0x74/0x80 [<c0167760>] ? kthread+0x0/0x80 [<c0104087>] kernel_thread_helper+0x7/0x10 ---[ end trace 2aff81010df9215b ]--- Signed-off-by: Rajkumar Manoharan <rmanoharan@atheros.com> Signed-off-by: Mohammed Shafi Shajakhan <mshajakhan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-06 23:13:11 +08:00
mutex_unlock(&sc->mutex);
return;
}
for (j = 0; j < timeout; j++) {
bool npend = false;
if (j)
usleep_range(1000, 2000);
for (i = 0; i < ATH9K_NUM_TX_QUEUES; i++) {
if (!ATH_TXQ_SETUP(sc, i))
continue;
npend = ath9k_has_pending_frames(sc, &sc->tx.txq[i]);
if (npend)
break;
}
if (!npend)
break;
}
if (drop) {
ath9k_ps_wakeup(sc);
spin_lock_bh(&sc->sc_pcu_lock);
drain_txq = ath_drain_all_txq(sc, false);
spin_unlock_bh(&sc->sc_pcu_lock);
if (!drain_txq)
ath_reset(sc, false);
ath9k_ps_restore(sc);
ieee80211_wake_queues(hw);
}
ieee80211_queue_delayed_work(hw, &sc->tx_complete_work, 0);
mutex_unlock(&sc->mutex);
}
static bool ath9k_tx_frames_pending(struct ieee80211_hw *hw)
{
struct ath_softc *sc = hw->priv;
int i;
for (i = 0; i < ATH9K_NUM_TX_QUEUES; i++) {
if (!ATH_TXQ_SETUP(sc, i))
continue;
if (ath9k_has_pending_frames(sc, &sc->tx.txq[i]))
return true;
}
return false;
}
static int ath9k_tx_last_beacon(struct ieee80211_hw *hw)
{
struct ath_softc *sc = hw->priv;
struct ath_hw *ah = sc->sc_ah;
struct ieee80211_vif *vif;
struct ath_vif *avp;
struct ath_buf *bf;
struct ath_tx_status ts;
bool edma = !!(ah->caps.hw_caps & ATH9K_HW_CAP_EDMA);
int status;
vif = sc->beacon.bslot[0];
if (!vif)
return 0;
if (!vif->bss_conf.enable_beacon)
return 0;
avp = (void *)vif->drv_priv;
if (!sc->beacon.tx_processed && !edma) {
tasklet_disable(&sc->bcon_tasklet);
bf = avp->av_bcbuf;
if (!bf || !bf->bf_mpdu)
goto skip;
status = ath9k_hw_txprocdesc(ah, bf->bf_desc, &ts);
if (status == -EINPROGRESS)
goto skip;
sc->beacon.tx_processed = true;
sc->beacon.tx_last = !(ts.ts_status & ATH9K_TXERR_MASK);
skip:
tasklet_enable(&sc->bcon_tasklet);
}
return sc->beacon.tx_last;
}
static int ath9k_get_stats(struct ieee80211_hw *hw,
struct ieee80211_low_level_stats *stats)
{
struct ath_softc *sc = hw->priv;
struct ath_hw *ah = sc->sc_ah;
struct ath9k_mib_stats *mib_stats = &ah->ah_mibStats;
stats->dot11ACKFailureCount = mib_stats->ackrcv_bad;
stats->dot11RTSFailureCount = mib_stats->rts_bad;
stats->dot11FCSErrorCount = mib_stats->fcs_bad;
stats->dot11RTSSuccessCount = mib_stats->rts_good;
return 0;
}
static u32 fill_chainmask(u32 cap, u32 new)
{
u32 filled = 0;
int i;
for (i = 0; cap && new; i++, cap >>= 1) {
if (!(cap & BIT(0)))
continue;
if (new & BIT(0))
filled |= BIT(i);
new >>= 1;
}
return filled;
}
static bool validate_antenna_mask(struct ath_hw *ah, u32 val)
{
switch (val & 0x7) {
case 0x1:
case 0x3:
case 0x7:
return true;
case 0x2:
return (ah->caps.rx_chainmask == 1);
default:
return false;
}
}
static int ath9k_set_antenna(struct ieee80211_hw *hw, u32 tx_ant, u32 rx_ant)
{
struct ath_softc *sc = hw->priv;
struct ath_hw *ah = sc->sc_ah;
if (ah->caps.rx_chainmask != 1)
rx_ant |= tx_ant;
if (!validate_antenna_mask(ah, rx_ant) || !tx_ant)
return -EINVAL;
sc->ant_rx = rx_ant;
sc->ant_tx = tx_ant;
if (ah->caps.rx_chainmask == 1)
return 0;
/* AR9100 runs into calibration issues if not all rx chains are enabled */
if (AR_SREV_9100(ah))
ah->rxchainmask = 0x7;
else
ah->rxchainmask = fill_chainmask(ah->caps.rx_chainmask, rx_ant);
ah->txchainmask = fill_chainmask(ah->caps.tx_chainmask, tx_ant);
ath9k_reload_chainmask_settings(sc);
return 0;
}
static int ath9k_get_antenna(struct ieee80211_hw *hw, u32 *tx_ant, u32 *rx_ant)
{
struct ath_softc *sc = hw->priv;
*tx_ant = sc->ant_tx;
*rx_ant = sc->ant_rx;
return 0;
}
#ifdef CONFIG_ATH9K_DEBUGFS
/* Ethtool support for get-stats */
#define AMKSTR(nm) #nm "_BE", #nm "_BK", #nm "_VI", #nm "_VO"
static const char ath9k_gstrings_stats[][ETH_GSTRING_LEN] = {
"tx_pkts_nic",
"tx_bytes_nic",
"rx_pkts_nic",
"rx_bytes_nic",
AMKSTR(d_tx_pkts),
AMKSTR(d_tx_bytes),
AMKSTR(d_tx_mpdus_queued),
AMKSTR(d_tx_mpdus_completed),
AMKSTR(d_tx_mpdu_xretries),
AMKSTR(d_tx_aggregates),
AMKSTR(d_tx_ampdus_queued_hw),
AMKSTR(d_tx_ampdus_queued_sw),
AMKSTR(d_tx_ampdus_completed),
AMKSTR(d_tx_ampdu_retries),
AMKSTR(d_tx_ampdu_xretries),
AMKSTR(d_tx_fifo_underrun),
AMKSTR(d_tx_op_exceeded),
AMKSTR(d_tx_timer_expiry),
AMKSTR(d_tx_desc_cfg_err),
AMKSTR(d_tx_data_underrun),
AMKSTR(d_tx_delim_underrun),
"d_rx_decrypt_crc_err",
"d_rx_phy_err",
"d_rx_mic_err",
"d_rx_pre_delim_crc_err",
"d_rx_post_delim_crc_err",
"d_rx_decrypt_busy_err",
"d_rx_phyerr_radar",
"d_rx_phyerr_ofdm_timing",
"d_rx_phyerr_cck_timing",
};
#define ATH9K_SSTATS_LEN ARRAY_SIZE(ath9k_gstrings_stats)
static void ath9k_get_et_strings(struct ieee80211_hw *hw,
struct ieee80211_vif *vif,
u32 sset, u8 *data)
{
if (sset == ETH_SS_STATS)
memcpy(data, *ath9k_gstrings_stats,
sizeof(ath9k_gstrings_stats));
}
static int ath9k_get_et_sset_count(struct ieee80211_hw *hw,
struct ieee80211_vif *vif, int sset)
{
if (sset == ETH_SS_STATS)
return ATH9K_SSTATS_LEN;
return 0;
}
#define PR_QNUM(_n) (sc->tx.txq_map[_n]->axq_qnum)
#define AWDATA(elem) \
do { \
data[i++] = sc->debug.stats.txstats[PR_QNUM(WME_AC_BE)].elem; \
data[i++] = sc->debug.stats.txstats[PR_QNUM(WME_AC_BK)].elem; \
data[i++] = sc->debug.stats.txstats[PR_QNUM(WME_AC_VI)].elem; \
data[i++] = sc->debug.stats.txstats[PR_QNUM(WME_AC_VO)].elem; \
} while (0)
#define AWDATA_RX(elem) \
do { \
data[i++] = sc->debug.stats.rxstats.elem; \
} while (0)
static void ath9k_get_et_stats(struct ieee80211_hw *hw,
struct ieee80211_vif *vif,
struct ethtool_stats *stats, u64 *data)
{
struct ath_softc *sc = hw->priv;
int i = 0;
data[i++] = (sc->debug.stats.txstats[PR_QNUM(WME_AC_BE)].tx_pkts_all +
sc->debug.stats.txstats[PR_QNUM(WME_AC_BK)].tx_pkts_all +
sc->debug.stats.txstats[PR_QNUM(WME_AC_VI)].tx_pkts_all +
sc->debug.stats.txstats[PR_QNUM(WME_AC_VO)].tx_pkts_all);
data[i++] = (sc->debug.stats.txstats[PR_QNUM(WME_AC_BE)].tx_bytes_all +
sc->debug.stats.txstats[PR_QNUM(WME_AC_BK)].tx_bytes_all +
sc->debug.stats.txstats[PR_QNUM(WME_AC_VI)].tx_bytes_all +
sc->debug.stats.txstats[PR_QNUM(WME_AC_VO)].tx_bytes_all);
AWDATA_RX(rx_pkts_all);
AWDATA_RX(rx_bytes_all);
AWDATA(tx_pkts_all);
AWDATA(tx_bytes_all);
AWDATA(queued);
AWDATA(completed);
AWDATA(xretries);
AWDATA(a_aggr);
AWDATA(a_queued_hw);
AWDATA(a_queued_sw);
AWDATA(a_completed);
AWDATA(a_retries);
AWDATA(a_xretries);
AWDATA(fifo_underrun);
AWDATA(xtxop);
AWDATA(timer_exp);
AWDATA(desc_cfg_err);
AWDATA(data_underrun);
AWDATA(delim_underrun);
AWDATA_RX(decrypt_crc_err);
AWDATA_RX(phy_err);
AWDATA_RX(mic_err);
AWDATA_RX(pre_delim_crc_err);
AWDATA_RX(post_delim_crc_err);
AWDATA_RX(decrypt_busy_err);
AWDATA_RX(phy_err_stats[ATH9K_PHYERR_RADAR]);
AWDATA_RX(phy_err_stats[ATH9K_PHYERR_OFDM_TIMING]);
AWDATA_RX(phy_err_stats[ATH9K_PHYERR_CCK_TIMING]);
WARN_ON(i != ATH9K_SSTATS_LEN);
}
/* End of ethtool get-stats functions */
#endif
#ifdef CONFIG_PM_SLEEP
static void ath9k_wow_map_triggers(struct ath_softc *sc,
struct cfg80211_wowlan *wowlan,
u32 *wow_triggers)
{
if (wowlan->disconnect)
*wow_triggers |= AH_WOW_LINK_CHANGE |
AH_WOW_BEACON_MISS;
if (wowlan->magic_pkt)
*wow_triggers |= AH_WOW_MAGIC_PATTERN_EN;
if (wowlan->n_patterns)
*wow_triggers |= AH_WOW_USER_PATTERN_EN;
sc->wow_enabled = *wow_triggers;
}
static void ath9k_wow_add_disassoc_deauth_pattern(struct ath_softc *sc)
{
struct ath_hw *ah = sc->sc_ah;
struct ath_common *common = ath9k_hw_common(ah);
struct ath9k_hw_capabilities *pcaps = &ah->caps;
int pattern_count = 0;
int i, byte_cnt;
u8 dis_deauth_pattern[MAX_PATTERN_SIZE];
u8 dis_deauth_mask[MAX_PATTERN_SIZE];
memset(dis_deauth_pattern, 0, MAX_PATTERN_SIZE);
memset(dis_deauth_mask, 0, MAX_PATTERN_SIZE);
/*
* Create Dissassociate / Deauthenticate packet filter
*
* 2 bytes 2 byte 6 bytes 6 bytes 6 bytes
* +--------------+----------+---------+--------+--------+----
* + Frame Control+ Duration + DA + SA + BSSID +
* +--------------+----------+---------+--------+--------+----
*
* The above is the management frame format for disassociate/
* deauthenticate pattern, from this we need to match the first byte
* of 'Frame Control' and DA, SA, and BSSID fields
* (skipping 2nd byte of FC and Duration feild.
*
* Disassociate pattern
* --------------------
* Frame control = 00 00 1010
* DA, SA, BSSID = x:x:x:x:x:x
* Pattern will be A0000000 | x:x:x:x:x:x | x:x:x:x:x:x
* | x:x:x:x:x:x -- 22 bytes
*
* Deauthenticate pattern
* ----------------------
* Frame control = 00 00 1100
* DA, SA, BSSID = x:x:x:x:x:x
* Pattern will be C0000000 | x:x:x:x:x:x | x:x:x:x:x:x
* | x:x:x:x:x:x -- 22 bytes
*/
/* Create Disassociate Pattern first */
byte_cnt = 0;
/* Fill out the mask with all FF's */
for (i = 0; i < MAX_PATTERN_MASK_SIZE; i++)
dis_deauth_mask[i] = 0xff;
/* copy the first byte of frame control field */
dis_deauth_pattern[byte_cnt] = 0xa0;
byte_cnt++;
/* skip 2nd byte of frame control and Duration field */
byte_cnt += 3;
/*
* need not match the destination mac address, it can be a broadcast
* mac address or an unicast to this station
*/
byte_cnt += 6;
/* copy the source mac address */
memcpy((dis_deauth_pattern + byte_cnt), common->curbssid, ETH_ALEN);
byte_cnt += 6;
/* copy the bssid, its same as the source mac address */
memcpy((dis_deauth_pattern + byte_cnt), common->curbssid, ETH_ALEN);
/* Create Disassociate pattern mask */
if (pcaps->hw_caps & ATH9K_HW_WOW_PATTERN_MATCH_EXACT) {
if (pcaps->hw_caps & ATH9K_HW_WOW_PATTERN_MATCH_DWORD) {
/*
* for AR9280, because of hardware limitation, the
* first 4 bytes have to be matched for all patterns.
* the mask for disassociation and de-auth pattern
* matching need to enable the first 4 bytes.
* also the duration field needs to be filled.
*/
dis_deauth_mask[0] = 0xf0;
/*
* fill in duration field
FIXME: what is the exact value ?
*/
dis_deauth_pattern[2] = 0xff;
dis_deauth_pattern[3] = 0xff;
} else {
dis_deauth_mask[0] = 0xfe;
}
dis_deauth_mask[1] = 0x03;
dis_deauth_mask[2] = 0xc0;
} else {
dis_deauth_mask[0] = 0xef;
dis_deauth_mask[1] = 0x3f;
dis_deauth_mask[2] = 0x00;
dis_deauth_mask[3] = 0xfc;
}
ath_dbg(common, WOW, "Adding disassoc/deauth patterns for WoW\n");
ath9k_hw_wow_apply_pattern(ah, dis_deauth_pattern, dis_deauth_mask,
pattern_count, byte_cnt);
pattern_count++;
/*
* for de-authenticate pattern, only the first byte of the frame
* control field gets changed from 0xA0 to 0xC0
*/
dis_deauth_pattern[0] = 0xC0;
ath9k_hw_wow_apply_pattern(ah, dis_deauth_pattern, dis_deauth_mask,
pattern_count, byte_cnt);
}
static void ath9k_wow_add_pattern(struct ath_softc *sc,
struct cfg80211_wowlan *wowlan)
{
struct ath_hw *ah = sc->sc_ah;
struct ath9k_wow_pattern *wow_pattern = NULL;
struct cfg80211_wowlan_trig_pkt_pattern *patterns = wowlan->patterns;
int mask_len;
s8 i = 0;
if (!wowlan->n_patterns)
return;
/*
* Add the new user configured patterns
*/
for (i = 0; i < wowlan->n_patterns; i++) {
wow_pattern = kzalloc(sizeof(*wow_pattern), GFP_KERNEL);
if (!wow_pattern)
return;
/*
* TODO: convert the generic user space pattern to
* appropriate chip specific/802.11 pattern.
*/
mask_len = DIV_ROUND_UP(wowlan->patterns[i].pattern_len, 8);
memset(wow_pattern->pattern_bytes, 0, MAX_PATTERN_SIZE);
memset(wow_pattern->mask_bytes, 0, MAX_PATTERN_SIZE);
memcpy(wow_pattern->pattern_bytes, patterns[i].pattern,
patterns[i].pattern_len);
memcpy(wow_pattern->mask_bytes, patterns[i].mask, mask_len);
wow_pattern->pattern_len = patterns[i].pattern_len;
/*
* just need to take care of deauth and disssoc pattern,
* make sure we don't overwrite them.
*/
ath9k_hw_wow_apply_pattern(ah, wow_pattern->pattern_bytes,
wow_pattern->mask_bytes,
i + 2,
wow_pattern->pattern_len);
kfree(wow_pattern);
}
}
static int ath9k_suspend(struct ieee80211_hw *hw,
struct cfg80211_wowlan *wowlan)
{
struct ath_softc *sc = hw->priv;
struct ath_hw *ah = sc->sc_ah;
struct ath_common *common = ath9k_hw_common(ah);
u32 wow_triggers_enabled = 0;
int ret = 0;
mutex_lock(&sc->mutex);
ath_cancel_work(sc);
ath_stop_ani(sc);
del_timer_sync(&sc->rx_poll_timer);
if (test_bit(SC_OP_INVALID, &sc->sc_flags)) {
ath_dbg(common, ANY, "Device not present\n");
ret = -EINVAL;
goto fail_wow;
}
if (WARN_ON(!wowlan)) {
ath_dbg(common, WOW, "None of the WoW triggers enabled\n");
ret = -EINVAL;
goto fail_wow;
}
if (!device_can_wakeup(sc->dev)) {
ath_dbg(common, WOW, "device_can_wakeup failed, WoW is not enabled\n");
ret = 1;
goto fail_wow;
}
/*
* none of the sta vifs are associated
* and we are not currently handling multivif
* cases, for instance we have to seperately
* configure 'keep alive frame' for each
* STA.
*/
if (!test_bit(SC_OP_PRIM_STA_VIF, &sc->sc_flags)) {
ath_dbg(common, WOW, "None of the STA vifs are associated\n");
ret = 1;
goto fail_wow;
}
if (sc->nvifs > 1) {
ath_dbg(common, WOW, "WoW for multivif is not yet supported\n");
ret = 1;
goto fail_wow;
}
ath9k_wow_map_triggers(sc, wowlan, &wow_triggers_enabled);
ath_dbg(common, WOW, "WoW triggers enabled 0x%x\n",
wow_triggers_enabled);
ath9k_ps_wakeup(sc);
ath9k_stop_btcoex(sc);
/*
* Enable wake up on recieving disassoc/deauth
* frame by default.
*/
ath9k_wow_add_disassoc_deauth_pattern(sc);
if (wow_triggers_enabled & AH_WOW_USER_PATTERN_EN)
ath9k_wow_add_pattern(sc, wowlan);
spin_lock_bh(&sc->sc_pcu_lock);
/*
* To avoid false wake, we enable beacon miss interrupt only
* when we go to sleep. We save the current interrupt mask
* so we can restore it after the system wakes up
*/
sc->wow_intr_before_sleep = ah->imask;
ah->imask &= ~ATH9K_INT_GLOBAL;
ath9k_hw_disable_interrupts(ah);
ah->imask = ATH9K_INT_BMISS | ATH9K_INT_GLOBAL;
ath9k_hw_set_interrupts(ah);
ath9k_hw_enable_interrupts(ah);
spin_unlock_bh(&sc->sc_pcu_lock);
/*
* we can now sync irq and kill any running tasklets, since we already
* disabled interrupts and not holding a spin lock
*/
synchronize_irq(sc->irq);
tasklet_kill(&sc->intr_tq);
ath9k_hw_wow_enable(ah, wow_triggers_enabled);
ath9k_ps_restore(sc);
ath_dbg(common, ANY, "WoW enabled in ath9k\n");
atomic_inc(&sc->wow_sleep_proc_intr);
fail_wow:
mutex_unlock(&sc->mutex);
return ret;
}
static int ath9k_resume(struct ieee80211_hw *hw)
{
struct ath_softc *sc = hw->priv;
struct ath_hw *ah = sc->sc_ah;
struct ath_common *common = ath9k_hw_common(ah);
u32 wow_status;
mutex_lock(&sc->mutex);
ath9k_ps_wakeup(sc);
spin_lock_bh(&sc->sc_pcu_lock);
ath9k_hw_disable_interrupts(ah);
ah->imask = sc->wow_intr_before_sleep;
ath9k_hw_set_interrupts(ah);
ath9k_hw_enable_interrupts(ah);
spin_unlock_bh(&sc->sc_pcu_lock);
wow_status = ath9k_hw_wow_wakeup(ah);
if (atomic_read(&sc->wow_got_bmiss_intr) == 0) {
/*
* some devices may not pick beacon miss
* as the reason they woke up so we add
* that here for that shortcoming.
*/
wow_status |= AH_WOW_BEACON_MISS;
atomic_dec(&sc->wow_got_bmiss_intr);
ath_dbg(common, ANY, "Beacon miss interrupt picked up during WoW sleep\n");
}
atomic_dec(&sc->wow_sleep_proc_intr);
if (wow_status) {
ath_dbg(common, ANY, "Waking up due to WoW triggers %s with WoW status = %x\n",
ath9k_hw_wow_event_to_string(wow_status), wow_status);
}
ath_restart_work(sc);
ath9k_start_btcoex(sc);
ath9k_ps_restore(sc);
mutex_unlock(&sc->mutex);
return 0;
}
static void ath9k_set_wakeup(struct ieee80211_hw *hw, bool enabled)
{
struct ath_softc *sc = hw->priv;
mutex_lock(&sc->mutex);
device_init_wakeup(sc->dev, 1);
device_set_wakeup_enable(sc->dev, enabled);
mutex_unlock(&sc->mutex);
}
#endif
struct ieee80211_ops ath9k_ops = {
.tx = ath9k_tx,
.start = ath9k_start,
.stop = ath9k_stop,
.add_interface = ath9k_add_interface,
.change_interface = ath9k_change_interface,
.remove_interface = ath9k_remove_interface,
.config = ath9k_config,
.configure_filter = ath9k_configure_filter,
.sta_add = ath9k_sta_add,
.sta_remove = ath9k_sta_remove,
.sta_notify = ath9k_sta_notify,
.conf_tx = ath9k_conf_tx,
.bss_info_changed = ath9k_bss_info_changed,
.set_key = ath9k_set_key,
.get_tsf = ath9k_get_tsf,
.set_tsf = ath9k_set_tsf,
.reset_tsf = ath9k_reset_tsf,
.ampdu_action = ath9k_ampdu_action,
.get_survey = ath9k_get_survey,
.rfkill_poll = ath9k_rfkill_poll_state,
.set_coverage_class = ath9k_set_coverage_class,
.flush = ath9k_flush,
.tx_frames_pending = ath9k_tx_frames_pending,
.tx_last_beacon = ath9k_tx_last_beacon,
.get_stats = ath9k_get_stats,
.set_antenna = ath9k_set_antenna,
.get_antenna = ath9k_get_antenna,
#ifdef CONFIG_PM_SLEEP
.suspend = ath9k_suspend,
.resume = ath9k_resume,
.set_wakeup = ath9k_set_wakeup,
#endif
#ifdef CONFIG_ATH9K_DEBUGFS
.get_et_sset_count = ath9k_get_et_sset_count,
.get_et_stats = ath9k_get_et_stats,
.get_et_strings = ath9k_get_et_strings,
#endif
};