2011-01-11 17:35:22 +08:00
|
|
|
/*
|
|
|
|
* FM Driver for Connectivity chip of Texas Instruments.
|
|
|
|
*
|
|
|
|
* This sub-module of FM driver is common for FM RX and TX
|
|
|
|
* functionality. This module is responsible for:
|
|
|
|
* 1) Forming group of Channel-8 commands to perform particular
|
|
|
|
* functionality (eg., frequency set require more than
|
|
|
|
* one Channel-8 command to be sent to the chip).
|
|
|
|
* 2) Sending each Channel-8 command to the chip and reading
|
|
|
|
* response back over Shared Transport.
|
|
|
|
* 3) Managing TX and RX Queues and Tasklets.
|
|
|
|
* 4) Handling FM Interrupt packet and taking appropriate action.
|
|
|
|
* 5) Loading FM firmware to the chip (common, FM TX, and FM RX
|
|
|
|
* firmware files based on mode selection)
|
|
|
|
*
|
|
|
|
* Copyright (C) 2011 Texas Instruments
|
|
|
|
* Author: Raja Mani <raja_mani@ti.com>
|
|
|
|
* Author: Manjunatha Halli <manjunatha_halli@ti.com>
|
|
|
|
*
|
|
|
|
* This program is free software; you can redistribute it and/or modify
|
|
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
|
|
* published by the Free Software Foundation.
|
|
|
|
*
|
|
|
|
* This program is distributed in the hope that it will be useful,
|
|
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
|
|
* GNU General Public License for more details.
|
|
|
|
*
|
|
|
|
*/
|
|
|
|
|
|
|
|
#include <linux/module.h>
|
|
|
|
#include <linux/firmware.h>
|
|
|
|
#include <linux/delay.h>
|
|
|
|
#include "fmdrv.h"
|
|
|
|
#include "fmdrv_v4l2.h"
|
|
|
|
#include "fmdrv_common.h"
|
|
|
|
#include <linux/ti_wilink_st.h>
|
|
|
|
#include "fmdrv_rx.h"
|
|
|
|
#include "fmdrv_tx.h"
|
|
|
|
|
|
|
|
/* Region info */
|
|
|
|
static struct region_info region_configs[] = {
|
|
|
|
/* Europe/US */
|
|
|
|
{
|
|
|
|
.chanl_space = FM_CHANNEL_SPACING_200KHZ * FM_FREQ_MUL,
|
|
|
|
.bot_freq = 87500, /* 87.5 MHz */
|
|
|
|
.top_freq = 108000, /* 108 MHz */
|
|
|
|
.fm_band = 0,
|
|
|
|
},
|
|
|
|
/* Japan */
|
|
|
|
{
|
|
|
|
.chanl_space = FM_CHANNEL_SPACING_200KHZ * FM_FREQ_MUL,
|
|
|
|
.bot_freq = 76000, /* 76 MHz */
|
|
|
|
.top_freq = 90000, /* 90 MHz */
|
|
|
|
.fm_band = 1,
|
|
|
|
},
|
|
|
|
};
|
|
|
|
|
|
|
|
/* Band selection */
|
|
|
|
static u8 default_radio_region; /* Europe/US */
|
|
|
|
module_param(default_radio_region, byte, 0);
|
|
|
|
MODULE_PARM_DESC(default_radio_region, "Region: 0=Europe/US, 1=Japan");
|
|
|
|
|
|
|
|
/* RDS buffer blocks */
|
|
|
|
static u32 default_rds_buf = 300;
|
|
|
|
module_param(default_rds_buf, uint, 0444);
|
2016-01-08 19:02:56 +08:00
|
|
|
MODULE_PARM_DESC(default_rds_buf, "RDS buffer entries");
|
2011-01-11 17:35:22 +08:00
|
|
|
|
|
|
|
/* Radio Nr */
|
|
|
|
static u32 radio_nr = -1;
|
|
|
|
module_param(radio_nr, int, 0444);
|
|
|
|
MODULE_PARM_DESC(radio_nr, "Radio Nr");
|
|
|
|
|
|
|
|
/* FM irq handlers forward declaration */
|
|
|
|
static void fm_irq_send_flag_getcmd(struct fmdev *);
|
|
|
|
static void fm_irq_handle_flag_getcmd_resp(struct fmdev *);
|
|
|
|
static void fm_irq_handle_hw_malfunction(struct fmdev *);
|
|
|
|
static void fm_irq_handle_rds_start(struct fmdev *);
|
|
|
|
static void fm_irq_send_rdsdata_getcmd(struct fmdev *);
|
|
|
|
static void fm_irq_handle_rdsdata_getcmd_resp(struct fmdev *);
|
|
|
|
static void fm_irq_handle_rds_finish(struct fmdev *);
|
|
|
|
static void fm_irq_handle_tune_op_ended(struct fmdev *);
|
|
|
|
static void fm_irq_handle_power_enb(struct fmdev *);
|
|
|
|
static void fm_irq_handle_low_rssi_start(struct fmdev *);
|
|
|
|
static void fm_irq_afjump_set_pi(struct fmdev *);
|
|
|
|
static void fm_irq_handle_set_pi_resp(struct fmdev *);
|
|
|
|
static void fm_irq_afjump_set_pimask(struct fmdev *);
|
|
|
|
static void fm_irq_handle_set_pimask_resp(struct fmdev *);
|
|
|
|
static void fm_irq_afjump_setfreq(struct fmdev *);
|
|
|
|
static void fm_irq_handle_setfreq_resp(struct fmdev *);
|
|
|
|
static void fm_irq_afjump_enableint(struct fmdev *);
|
|
|
|
static void fm_irq_afjump_enableint_resp(struct fmdev *);
|
|
|
|
static void fm_irq_start_afjump(struct fmdev *);
|
|
|
|
static void fm_irq_handle_start_afjump_resp(struct fmdev *);
|
|
|
|
static void fm_irq_afjump_rd_freq(struct fmdev *);
|
|
|
|
static void fm_irq_afjump_rd_freq_resp(struct fmdev *);
|
|
|
|
static void fm_irq_handle_low_rssi_finish(struct fmdev *);
|
|
|
|
static void fm_irq_send_intmsk_cmd(struct fmdev *);
|
|
|
|
static void fm_irq_handle_intmsk_cmd_resp(struct fmdev *);
|
|
|
|
|
|
|
|
/*
|
|
|
|
* When FM common module receives interrupt packet, following handlers
|
|
|
|
* will be executed one after another to service the interrupt(s)
|
|
|
|
*/
|
|
|
|
enum fmc_irq_handler_index {
|
|
|
|
FM_SEND_FLAG_GETCMD_IDX,
|
|
|
|
FM_HANDLE_FLAG_GETCMD_RESP_IDX,
|
|
|
|
|
|
|
|
/* HW malfunction irq handler */
|
|
|
|
FM_HW_MAL_FUNC_IDX,
|
|
|
|
|
|
|
|
/* RDS threshold reached irq handler */
|
|
|
|
FM_RDS_START_IDX,
|
|
|
|
FM_RDS_SEND_RDS_GETCMD_IDX,
|
|
|
|
FM_RDS_HANDLE_RDS_GETCMD_RESP_IDX,
|
|
|
|
FM_RDS_FINISH_IDX,
|
|
|
|
|
|
|
|
/* Tune operation ended irq handler */
|
|
|
|
FM_HW_TUNE_OP_ENDED_IDX,
|
|
|
|
|
|
|
|
/* TX power enable irq handler */
|
|
|
|
FM_HW_POWER_ENB_IDX,
|
|
|
|
|
|
|
|
/* Low RSSI irq handler */
|
|
|
|
FM_LOW_RSSI_START_IDX,
|
|
|
|
FM_AF_JUMP_SETPI_IDX,
|
|
|
|
FM_AF_JUMP_HANDLE_SETPI_RESP_IDX,
|
|
|
|
FM_AF_JUMP_SETPI_MASK_IDX,
|
|
|
|
FM_AF_JUMP_HANDLE_SETPI_MASK_RESP_IDX,
|
|
|
|
FM_AF_JUMP_SET_AF_FREQ_IDX,
|
|
|
|
FM_AF_JUMP_HANDLE_SET_AFFREQ_RESP_IDX,
|
|
|
|
FM_AF_JUMP_ENABLE_INT_IDX,
|
|
|
|
FM_AF_JUMP_ENABLE_INT_RESP_IDX,
|
|
|
|
FM_AF_JUMP_START_AFJUMP_IDX,
|
|
|
|
FM_AF_JUMP_HANDLE_START_AFJUMP_RESP_IDX,
|
|
|
|
FM_AF_JUMP_RD_FREQ_IDX,
|
|
|
|
FM_AF_JUMP_RD_FREQ_RESP_IDX,
|
|
|
|
FM_LOW_RSSI_FINISH_IDX,
|
|
|
|
|
|
|
|
/* Interrupt process post action */
|
|
|
|
FM_SEND_INTMSK_CMD_IDX,
|
|
|
|
FM_HANDLE_INTMSK_CMD_RESP_IDX,
|
|
|
|
};
|
|
|
|
|
|
|
|
/* FM interrupt handler table */
|
|
|
|
static int_handler_prototype int_handler_table[] = {
|
|
|
|
fm_irq_send_flag_getcmd,
|
|
|
|
fm_irq_handle_flag_getcmd_resp,
|
|
|
|
fm_irq_handle_hw_malfunction,
|
|
|
|
fm_irq_handle_rds_start, /* RDS threshold reached irq handler */
|
|
|
|
fm_irq_send_rdsdata_getcmd,
|
|
|
|
fm_irq_handle_rdsdata_getcmd_resp,
|
|
|
|
fm_irq_handle_rds_finish,
|
|
|
|
fm_irq_handle_tune_op_ended,
|
|
|
|
fm_irq_handle_power_enb, /* TX power enable irq handler */
|
|
|
|
fm_irq_handle_low_rssi_start,
|
|
|
|
fm_irq_afjump_set_pi,
|
|
|
|
fm_irq_handle_set_pi_resp,
|
|
|
|
fm_irq_afjump_set_pimask,
|
|
|
|
fm_irq_handle_set_pimask_resp,
|
|
|
|
fm_irq_afjump_setfreq,
|
|
|
|
fm_irq_handle_setfreq_resp,
|
|
|
|
fm_irq_afjump_enableint,
|
|
|
|
fm_irq_afjump_enableint_resp,
|
|
|
|
fm_irq_start_afjump,
|
|
|
|
fm_irq_handle_start_afjump_resp,
|
|
|
|
fm_irq_afjump_rd_freq,
|
|
|
|
fm_irq_afjump_rd_freq_resp,
|
|
|
|
fm_irq_handle_low_rssi_finish,
|
|
|
|
fm_irq_send_intmsk_cmd, /* Interrupt process post action */
|
|
|
|
fm_irq_handle_intmsk_cmd_resp
|
|
|
|
};
|
|
|
|
|
2013-10-04 22:01:46 +08:00
|
|
|
static long (*g_st_write) (struct sk_buff *skb);
|
2011-01-11 17:35:22 +08:00
|
|
|
static struct completion wait_for_fmdrv_reg_comp;
|
|
|
|
|
|
|
|
static inline void fm_irq_call(struct fmdev *fmdev)
|
|
|
|
{
|
|
|
|
fmdev->irq_info.handlers[fmdev->irq_info.stage](fmdev);
|
|
|
|
}
|
|
|
|
|
|
|
|
/* Continue next function in interrupt handler table */
|
|
|
|
static inline void fm_irq_call_stage(struct fmdev *fmdev, u8 stage)
|
|
|
|
{
|
|
|
|
fmdev->irq_info.stage = stage;
|
|
|
|
fm_irq_call(fmdev);
|
|
|
|
}
|
|
|
|
|
|
|
|
static inline void fm_irq_timeout_stage(struct fmdev *fmdev, u8 stage)
|
|
|
|
{
|
|
|
|
fmdev->irq_info.stage = stage;
|
|
|
|
mod_timer(&fmdev->irq_info.timer, jiffies + FM_DRV_TX_TIMEOUT);
|
|
|
|
}
|
|
|
|
|
|
|
|
#ifdef FM_DUMP_TXRX_PKT
|
|
|
|
/* To dump outgoing FM Channel-8 packets */
|
|
|
|
inline void dump_tx_skb_data(struct sk_buff *skb)
|
|
|
|
{
|
|
|
|
int len, len_org;
|
|
|
|
u8 index;
|
|
|
|
struct fm_cmd_msg_hdr *cmd_hdr;
|
|
|
|
|
|
|
|
cmd_hdr = (struct fm_cmd_msg_hdr *)skb->data;
|
|
|
|
printk(KERN_INFO "<<%shdr:%02x len:%02x opcode:%02x type:%s dlen:%02x",
|
|
|
|
fm_cb(skb)->completion ? " " : "*", cmd_hdr->hdr,
|
|
|
|
cmd_hdr->len, cmd_hdr->op,
|
|
|
|
cmd_hdr->rd_wr ? "RD" : "WR", cmd_hdr->dlen);
|
|
|
|
|
|
|
|
len_org = skb->len - FM_CMD_MSG_HDR_SIZE;
|
|
|
|
if (len_org > 0) {
|
2016-10-14 18:33:00 +08:00
|
|
|
printk(KERN_CONT "\n data(%d): ", cmd_hdr->dlen);
|
2011-01-11 17:35:22 +08:00
|
|
|
len = min(len_org, 14);
|
|
|
|
for (index = 0; index < len; index++)
|
2016-10-14 18:33:00 +08:00
|
|
|
printk(KERN_CONT "%x ",
|
2011-01-11 17:35:22 +08:00
|
|
|
skb->data[FM_CMD_MSG_HDR_SIZE + index]);
|
2016-10-14 18:33:00 +08:00
|
|
|
printk(KERN_CONT "%s", (len_org > 14) ? ".." : "");
|
2011-01-11 17:35:22 +08:00
|
|
|
}
|
2016-10-14 18:33:00 +08:00
|
|
|
printk(KERN_CONT "\n");
|
2011-01-11 17:35:22 +08:00
|
|
|
}
|
|
|
|
|
|
|
|
/* To dump incoming FM Channel-8 packets */
|
|
|
|
inline void dump_rx_skb_data(struct sk_buff *skb)
|
|
|
|
{
|
|
|
|
int len, len_org;
|
|
|
|
u8 index;
|
|
|
|
struct fm_event_msg_hdr *evt_hdr;
|
|
|
|
|
|
|
|
evt_hdr = (struct fm_event_msg_hdr *)skb->data;
|
[media] wl128x: don't break long lines
Due to the 80-cols restrictions, and latter due to checkpatch
warnings, several strings were broken into multiple lines. This
is not considered a good practice anymore, as it makes harder
to grep for strings at the source code.
As we're right now fixing other drivers due to KERN_CONT, we need
to be able to identify what printk strings don't end with a "\n".
It is a way easier to detect those if we don't break long lines.
So, join those continuation lines.
The patch was generated via the script below, and manually
adjusted if needed.
</script>
use Text::Tabs;
while (<>) {
if ($next ne "") {
$c=$_;
if ($c =~ /^\s+\"(.*)/) {
$c2=$1;
$next =~ s/\"\n$//;
$n = expand($next);
$funpos = index($n, '(');
$pos = index($c2, '",');
if ($funpos && $pos > 0) {
$s1 = substr $c2, 0, $pos + 2;
$s2 = ' ' x ($funpos + 1) . substr $c2, $pos + 2;
$s2 =~ s/^\s+//;
$s2 = ' ' x ($funpos + 1) . $s2 if ($s2 ne "");
print unexpand("$next$s1\n");
print unexpand("$s2\n") if ($s2 ne "");
} else {
print "$next$c2\n";
}
$next="";
next;
} else {
print $next;
}
$next="";
} else {
if (m/\"$/) {
if (!m/\\n\"$/) {
$next=$_;
next;
}
}
}
print $_;
}
</script>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-10-19 03:44:12 +08:00
|
|
|
printk(KERN_INFO ">> hdr:%02x len:%02x sts:%02x numhci:%02x opcode:%02x type:%s dlen:%02x",
|
|
|
|
evt_hdr->hdr, evt_hdr->len,
|
|
|
|
evt_hdr->status, evt_hdr->num_fm_hci_cmds, evt_hdr->op,
|
|
|
|
(evt_hdr->rd_wr) ? "RD" : "WR", evt_hdr->dlen);
|
2011-01-11 17:35:22 +08:00
|
|
|
|
|
|
|
len_org = skb->len - FM_EVT_MSG_HDR_SIZE;
|
|
|
|
if (len_org > 0) {
|
2016-10-14 18:33:00 +08:00
|
|
|
printk(KERN_CONT "\n data(%d): ", evt_hdr->dlen);
|
2011-01-11 17:35:22 +08:00
|
|
|
len = min(len_org, 14);
|
|
|
|
for (index = 0; index < len; index++)
|
2016-10-14 18:33:00 +08:00
|
|
|
printk(KERN_CONT "%x ",
|
2011-01-11 17:35:22 +08:00
|
|
|
skb->data[FM_EVT_MSG_HDR_SIZE + index]);
|
2016-10-14 18:33:00 +08:00
|
|
|
printk(KERN_CONT "%s", (len_org > 14) ? ".." : "");
|
2011-01-11 17:35:22 +08:00
|
|
|
}
|
2016-10-14 18:33:00 +08:00
|
|
|
printk(KERN_CONT "\n");
|
2011-01-11 17:35:22 +08:00
|
|
|
}
|
|
|
|
#endif
|
|
|
|
|
|
|
|
void fmc_update_region_info(struct fmdev *fmdev, u8 region_to_set)
|
|
|
|
{
|
|
|
|
fmdev->rx.region = region_configs[region_to_set];
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* FM common sub-module will schedule this tasklet whenever it receives
|
|
|
|
* FM packet from ST driver.
|
|
|
|
*/
|
|
|
|
static void recv_tasklet(unsigned long arg)
|
|
|
|
{
|
|
|
|
struct fmdev *fmdev;
|
|
|
|
struct fm_irq *irq_info;
|
|
|
|
struct fm_event_msg_hdr *evt_hdr;
|
|
|
|
struct sk_buff *skb;
|
|
|
|
u8 num_fm_hci_cmds;
|
|
|
|
unsigned long flags;
|
|
|
|
|
|
|
|
fmdev = (struct fmdev *)arg;
|
|
|
|
irq_info = &fmdev->irq_info;
|
|
|
|
/* Process all packets in the RX queue */
|
|
|
|
while ((skb = skb_dequeue(&fmdev->rx_q))) {
|
|
|
|
if (skb->len < sizeof(struct fm_event_msg_hdr)) {
|
[media] wl128x: don't break long lines
Due to the 80-cols restrictions, and latter due to checkpatch
warnings, several strings were broken into multiple lines. This
is not considered a good practice anymore, as it makes harder
to grep for strings at the source code.
As we're right now fixing other drivers due to KERN_CONT, we need
to be able to identify what printk strings don't end with a "\n".
It is a way easier to detect those if we don't break long lines.
So, join those continuation lines.
The patch was generated via the script below, and manually
adjusted if needed.
</script>
use Text::Tabs;
while (<>) {
if ($next ne "") {
$c=$_;
if ($c =~ /^\s+\"(.*)/) {
$c2=$1;
$next =~ s/\"\n$//;
$n = expand($next);
$funpos = index($n, '(');
$pos = index($c2, '",');
if ($funpos && $pos > 0) {
$s1 = substr $c2, 0, $pos + 2;
$s2 = ' ' x ($funpos + 1) . substr $c2, $pos + 2;
$s2 =~ s/^\s+//;
$s2 = ' ' x ($funpos + 1) . $s2 if ($s2 ne "");
print unexpand("$next$s1\n");
print unexpand("$s2\n") if ($s2 ne "");
} else {
print "$next$c2\n";
}
$next="";
next;
} else {
print $next;
}
$next="";
} else {
if (m/\"$/) {
if (!m/\\n\"$/) {
$next=$_;
next;
}
}
}
print $_;
}
</script>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-10-19 03:44:12 +08:00
|
|
|
fmerr("skb(%p) has only %d bytes, at least need %zu bytes to decode\n",
|
|
|
|
skb,
|
|
|
|
skb->len, sizeof(struct fm_event_msg_hdr));
|
2011-01-11 17:35:22 +08:00
|
|
|
kfree_skb(skb);
|
|
|
|
continue;
|
|
|
|
}
|
|
|
|
|
|
|
|
evt_hdr = (void *)skb->data;
|
|
|
|
num_fm_hci_cmds = evt_hdr->num_fm_hci_cmds;
|
|
|
|
|
|
|
|
/* FM interrupt packet? */
|
|
|
|
if (evt_hdr->op == FM_INTERRUPT) {
|
|
|
|
/* FM interrupt handler started already? */
|
|
|
|
if (!test_bit(FM_INTTASK_RUNNING, &fmdev->flag)) {
|
|
|
|
set_bit(FM_INTTASK_RUNNING, &fmdev->flag);
|
|
|
|
if (irq_info->stage != 0) {
|
|
|
|
fmerr("Inval stage resetting to zero\n");
|
|
|
|
irq_info->stage = 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Execute first function in interrupt handler
|
|
|
|
* table.
|
|
|
|
*/
|
|
|
|
irq_info->handlers[irq_info->stage](fmdev);
|
|
|
|
} else {
|
|
|
|
set_bit(FM_INTTASK_SCHEDULE_PENDING, &fmdev->flag);
|
|
|
|
}
|
|
|
|
kfree_skb(skb);
|
|
|
|
}
|
|
|
|
/* Anyone waiting for this with completion handler? */
|
|
|
|
else if (evt_hdr->op == fmdev->pre_op && fmdev->resp_comp != NULL) {
|
|
|
|
|
|
|
|
spin_lock_irqsave(&fmdev->resp_skb_lock, flags);
|
|
|
|
fmdev->resp_skb = skb;
|
|
|
|
spin_unlock_irqrestore(&fmdev->resp_skb_lock, flags);
|
|
|
|
complete(fmdev->resp_comp);
|
|
|
|
|
|
|
|
fmdev->resp_comp = NULL;
|
|
|
|
atomic_set(&fmdev->tx_cnt, 1);
|
|
|
|
}
|
|
|
|
/* Is this for interrupt handler? */
|
|
|
|
else if (evt_hdr->op == fmdev->pre_op && fmdev->resp_comp == NULL) {
|
|
|
|
if (fmdev->resp_skb != NULL)
|
|
|
|
fmerr("Response SKB ptr not NULL\n");
|
|
|
|
|
|
|
|
spin_lock_irqsave(&fmdev->resp_skb_lock, flags);
|
|
|
|
fmdev->resp_skb = skb;
|
|
|
|
spin_unlock_irqrestore(&fmdev->resp_skb_lock, flags);
|
|
|
|
|
|
|
|
/* Execute interrupt handler where state index points */
|
|
|
|
irq_info->handlers[irq_info->stage](fmdev);
|
|
|
|
|
|
|
|
kfree_skb(skb);
|
|
|
|
atomic_set(&fmdev->tx_cnt, 1);
|
|
|
|
} else {
|
|
|
|
fmerr("Nobody claimed SKB(%p),purging\n", skb);
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Check flow control field. If Num_FM_HCI_Commands field is
|
|
|
|
* not zero, schedule FM TX tasklet.
|
|
|
|
*/
|
|
|
|
if (num_fm_hci_cmds && atomic_read(&fmdev->tx_cnt))
|
|
|
|
if (!skb_queue_empty(&fmdev->tx_q))
|
|
|
|
tasklet_schedule(&fmdev->tx_task);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
/* FM send tasklet: is scheduled when FM packet has to be sent to chip */
|
|
|
|
static void send_tasklet(unsigned long arg)
|
|
|
|
{
|
|
|
|
struct fmdev *fmdev;
|
|
|
|
struct sk_buff *skb;
|
|
|
|
int len;
|
|
|
|
|
|
|
|
fmdev = (struct fmdev *)arg;
|
|
|
|
|
|
|
|
if (!atomic_read(&fmdev->tx_cnt))
|
|
|
|
return;
|
|
|
|
|
2011-03-31 09:57:33 +08:00
|
|
|
/* Check, is there any timeout happened to last transmitted packet */
|
2011-01-11 17:35:22 +08:00
|
|
|
if ((jiffies - fmdev->last_tx_jiffies) > FM_DRV_TX_TIMEOUT) {
|
|
|
|
fmerr("TX timeout occurred\n");
|
|
|
|
atomic_set(&fmdev->tx_cnt, 1);
|
|
|
|
}
|
|
|
|
|
|
|
|
/* Send queued FM TX packets */
|
|
|
|
skb = skb_dequeue(&fmdev->tx_q);
|
|
|
|
if (!skb)
|
|
|
|
return;
|
|
|
|
|
|
|
|
atomic_dec(&fmdev->tx_cnt);
|
|
|
|
fmdev->pre_op = fm_cb(skb)->fm_op;
|
|
|
|
|
|
|
|
if (fmdev->resp_comp != NULL)
|
|
|
|
fmerr("Response completion handler is not NULL\n");
|
|
|
|
|
|
|
|
fmdev->resp_comp = fm_cb(skb)->completion;
|
|
|
|
|
|
|
|
/* Write FM packet to ST driver */
|
|
|
|
len = g_st_write(skb);
|
|
|
|
if (len < 0) {
|
|
|
|
kfree_skb(skb);
|
|
|
|
fmdev->resp_comp = NULL;
|
|
|
|
fmerr("TX tasklet failed to send skb(%p)\n", skb);
|
|
|
|
atomic_set(&fmdev->tx_cnt, 1);
|
|
|
|
} else {
|
|
|
|
fmdev->last_tx_jiffies = jiffies;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Queues FM Channel-8 packet to FM TX queue and schedules FM TX tasklet for
|
|
|
|
* transmission
|
|
|
|
*/
|
2011-12-02 17:01:11 +08:00
|
|
|
static int fm_send_cmd(struct fmdev *fmdev, u8 fm_op, u16 type, void *payload,
|
2011-01-11 17:35:22 +08:00
|
|
|
int payload_len, struct completion *wait_completion)
|
|
|
|
{
|
|
|
|
struct sk_buff *skb;
|
|
|
|
struct fm_cmd_msg_hdr *hdr;
|
|
|
|
int size;
|
|
|
|
|
|
|
|
if (fm_op >= FM_INTERRUPT) {
|
|
|
|
fmerr("Invalid fm opcode - %d\n", fm_op);
|
|
|
|
return -EINVAL;
|
|
|
|
}
|
|
|
|
if (test_bit(FM_FW_DW_INPROGRESS, &fmdev->flag) && payload == NULL) {
|
|
|
|
fmerr("Payload data is NULL during fw download\n");
|
|
|
|
return -EINVAL;
|
|
|
|
}
|
|
|
|
if (!test_bit(FM_FW_DW_INPROGRESS, &fmdev->flag))
|
|
|
|
size =
|
|
|
|
FM_CMD_MSG_HDR_SIZE + ((payload == NULL) ? 0 : payload_len);
|
|
|
|
else
|
|
|
|
size = payload_len;
|
|
|
|
|
|
|
|
skb = alloc_skb(size, GFP_ATOMIC);
|
|
|
|
if (!skb) {
|
|
|
|
fmerr("No memory to create new SKB\n");
|
|
|
|
return -ENOMEM;
|
|
|
|
}
|
|
|
|
/*
|
|
|
|
* Don't fill FM header info for the commands which come from
|
|
|
|
* FM firmware file.
|
|
|
|
*/
|
|
|
|
if (!test_bit(FM_FW_DW_INPROGRESS, &fmdev->flag) ||
|
|
|
|
test_bit(FM_INTTASK_RUNNING, &fmdev->flag)) {
|
|
|
|
/* Fill command header info */
|
networking: make skb_put & friends return void pointers
It seems like a historic accident that these return unsigned char *,
and in many places that means casts are required, more often than not.
Make these functions (skb_put, __skb_put and pskb_put) return void *
and remove all the casts across the tree, adding a (u8 *) cast only
where the unsigned char pointer was used directly, all done with the
following spatch:
@@
expression SKB, LEN;
typedef u8;
identifier fn = { skb_put, __skb_put };
@@
- *(fn(SKB, LEN))
+ *(u8 *)fn(SKB, LEN)
@@
expression E, SKB, LEN;
identifier fn = { skb_put, __skb_put };
type T;
@@
- E = ((T *)(fn(SKB, LEN)))
+ E = fn(SKB, LEN)
which actually doesn't cover pskb_put since there are only three
users overall.
A handful of stragglers were converted manually, notably a macro in
drivers/isdn/i4l/isdn_bsdcomp.c and, oddly enough, one of the many
instances in net/bluetooth/hci_sock.c. In the former file, I also
had to fix one whitespace problem spatch introduced.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-16 20:29:21 +08:00
|
|
|
hdr = skb_put(skb, FM_CMD_MSG_HDR_SIZE);
|
2011-01-11 17:35:22 +08:00
|
|
|
hdr->hdr = FM_PKT_LOGICAL_CHAN_NUMBER; /* 0x08 */
|
|
|
|
|
|
|
|
/* 3 (fm_opcode,rd_wr,dlen) + payload len) */
|
|
|
|
hdr->len = ((payload == NULL) ? 0 : payload_len) + 3;
|
|
|
|
|
|
|
|
/* FM opcode */
|
|
|
|
hdr->op = fm_op;
|
|
|
|
|
|
|
|
/* read/write type */
|
|
|
|
hdr->rd_wr = type;
|
|
|
|
hdr->dlen = payload_len;
|
|
|
|
fm_cb(skb)->fm_op = fm_op;
|
|
|
|
|
|
|
|
/*
|
|
|
|
* If firmware download has finished and the command is
|
|
|
|
* not a read command then payload is != NULL - a write
|
|
|
|
* command with u16 payload - convert to be16
|
|
|
|
*/
|
|
|
|
if (payload != NULL)
|
2014-08-21 06:20:12 +08:00
|
|
|
*(__be16 *)payload = cpu_to_be16(*(u16 *)payload);
|
2011-01-11 17:35:22 +08:00
|
|
|
|
|
|
|
} else if (payload != NULL) {
|
|
|
|
fm_cb(skb)->fm_op = *((u8 *)payload + 2);
|
|
|
|
}
|
|
|
|
if (payload != NULL)
|
networking: introduce and use skb_put_data()
A common pattern with skb_put() is to just want to memcpy()
some data into the new space, introduce skb_put_data() for
this.
An spatch similar to the one for skb_put_zero() converts many
of the places using it:
@@
identifier p, p2;
expression len, skb, data;
type t, t2;
@@
(
-p = skb_put(skb, len);
+p = skb_put_data(skb, data, len);
|
-p = (t)skb_put(skb, len);
+p = skb_put_data(skb, data, len);
)
(
p2 = (t2)p;
-memcpy(p2, data, len);
|
-memcpy(p, data, len);
)
@@
type t, t2;
identifier p, p2;
expression skb, data;
@@
t *p;
...
(
-p = skb_put(skb, sizeof(t));
+p = skb_put_data(skb, data, sizeof(t));
|
-p = (t *)skb_put(skb, sizeof(t));
+p = skb_put_data(skb, data, sizeof(t));
)
(
p2 = (t2)p;
-memcpy(p2, data, sizeof(*p));
|
-memcpy(p, data, sizeof(*p));
)
@@
expression skb, len, data;
@@
-memcpy(skb_put(skb, len), data, len);
+skb_put_data(skb, data, len);
(again, manually post-processed to retain some comments)
Reviewed-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-16 20:29:20 +08:00
|
|
|
skb_put_data(skb, payload, payload_len);
|
2011-01-11 17:35:22 +08:00
|
|
|
|
|
|
|
fm_cb(skb)->completion = wait_completion;
|
|
|
|
skb_queue_tail(&fmdev->tx_q, skb);
|
|
|
|
tasklet_schedule(&fmdev->tx_task);
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* Sends FM Channel-8 command to the chip and waits for the response */
|
2011-12-02 17:01:11 +08:00
|
|
|
int fmc_send_cmd(struct fmdev *fmdev, u8 fm_op, u16 type, void *payload,
|
2011-01-11 17:35:22 +08:00
|
|
|
unsigned int payload_len, void *response, int *response_len)
|
|
|
|
{
|
|
|
|
struct sk_buff *skb;
|
|
|
|
struct fm_event_msg_hdr *evt_hdr;
|
|
|
|
unsigned long flags;
|
2011-12-02 17:01:11 +08:00
|
|
|
int ret;
|
2011-01-11 17:35:22 +08:00
|
|
|
|
|
|
|
init_completion(&fmdev->maintask_comp);
|
|
|
|
ret = fm_send_cmd(fmdev, fm_op, type, payload, payload_len,
|
|
|
|
&fmdev->maintask_comp);
|
|
|
|
if (ret)
|
|
|
|
return ret;
|
|
|
|
|
2011-12-02 17:01:11 +08:00
|
|
|
if (!wait_for_completion_timeout(&fmdev->maintask_comp,
|
|
|
|
FM_DRV_TX_TIMEOUT)) {
|
[media] wl128x: don't break long lines
Due to the 80-cols restrictions, and latter due to checkpatch
warnings, several strings were broken into multiple lines. This
is not considered a good practice anymore, as it makes harder
to grep for strings at the source code.
As we're right now fixing other drivers due to KERN_CONT, we need
to be able to identify what printk strings don't end with a "\n".
It is a way easier to detect those if we don't break long lines.
So, join those continuation lines.
The patch was generated via the script below, and manually
adjusted if needed.
</script>
use Text::Tabs;
while (<>) {
if ($next ne "") {
$c=$_;
if ($c =~ /^\s+\"(.*)/) {
$c2=$1;
$next =~ s/\"\n$//;
$n = expand($next);
$funpos = index($n, '(');
$pos = index($c2, '",');
if ($funpos && $pos > 0) {
$s1 = substr $c2, 0, $pos + 2;
$s2 = ' ' x ($funpos + 1) . substr $c2, $pos + 2;
$s2 =~ s/^\s+//;
$s2 = ' ' x ($funpos + 1) . $s2 if ($s2 ne "");
print unexpand("$next$s1\n");
print unexpand("$s2\n") if ($s2 ne "");
} else {
print "$next$c2\n";
}
$next="";
next;
} else {
print $next;
}
$next="";
} else {
if (m/\"$/) {
if (!m/\\n\"$/) {
$next=$_;
next;
}
}
}
print $_;
}
</script>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-10-19 03:44:12 +08:00
|
|
|
fmerr("Timeout(%d sec),didn't get regcompletion signal from RX tasklet\n",
|
2011-01-11 17:35:22 +08:00
|
|
|
jiffies_to_msecs(FM_DRV_TX_TIMEOUT) / 1000);
|
|
|
|
return -ETIMEDOUT;
|
|
|
|
}
|
|
|
|
if (!fmdev->resp_skb) {
|
2011-03-31 09:57:33 +08:00
|
|
|
fmerr("Response SKB is missing\n");
|
2011-01-11 17:35:22 +08:00
|
|
|
return -EFAULT;
|
|
|
|
}
|
|
|
|
spin_lock_irqsave(&fmdev->resp_skb_lock, flags);
|
|
|
|
skb = fmdev->resp_skb;
|
|
|
|
fmdev->resp_skb = NULL;
|
|
|
|
spin_unlock_irqrestore(&fmdev->resp_skb_lock, flags);
|
|
|
|
|
|
|
|
evt_hdr = (void *)skb->data;
|
|
|
|
if (evt_hdr->status != 0) {
|
|
|
|
fmerr("Received event pkt status(%d) is not zero\n",
|
|
|
|
evt_hdr->status);
|
|
|
|
kfree_skb(skb);
|
|
|
|
return -EIO;
|
|
|
|
}
|
|
|
|
/* Send response data to caller */
|
|
|
|
if (response != NULL && response_len != NULL && evt_hdr->dlen) {
|
|
|
|
/* Skip header info and copy only response data */
|
|
|
|
skb_pull(skb, sizeof(struct fm_event_msg_hdr));
|
|
|
|
memcpy(response, skb->data, evt_hdr->dlen);
|
|
|
|
*response_len = evt_hdr->dlen;
|
|
|
|
} else if (response_len != NULL && evt_hdr->dlen == 0) {
|
|
|
|
*response_len = 0;
|
|
|
|
}
|
|
|
|
kfree_skb(skb);
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* --- Helper functions used in FM interrupt handlers ---*/
|
2011-12-02 17:01:11 +08:00
|
|
|
static inline int check_cmdresp_status(struct fmdev *fmdev,
|
2011-01-11 17:35:22 +08:00
|
|
|
struct sk_buff **skb)
|
|
|
|
{
|
|
|
|
struct fm_event_msg_hdr *fm_evt_hdr;
|
|
|
|
unsigned long flags;
|
|
|
|
|
|
|
|
del_timer(&fmdev->irq_info.timer);
|
|
|
|
|
|
|
|
spin_lock_irqsave(&fmdev->resp_skb_lock, flags);
|
|
|
|
*skb = fmdev->resp_skb;
|
|
|
|
fmdev->resp_skb = NULL;
|
|
|
|
spin_unlock_irqrestore(&fmdev->resp_skb_lock, flags);
|
|
|
|
|
|
|
|
fm_evt_hdr = (void *)(*skb)->data;
|
|
|
|
if (fm_evt_hdr->status != 0) {
|
[media] wl128x: don't break long lines
Due to the 80-cols restrictions, and latter due to checkpatch
warnings, several strings were broken into multiple lines. This
is not considered a good practice anymore, as it makes harder
to grep for strings at the source code.
As we're right now fixing other drivers due to KERN_CONT, we need
to be able to identify what printk strings don't end with a "\n".
It is a way easier to detect those if we don't break long lines.
So, join those continuation lines.
The patch was generated via the script below, and manually
adjusted if needed.
</script>
use Text::Tabs;
while (<>) {
if ($next ne "") {
$c=$_;
if ($c =~ /^\s+\"(.*)/) {
$c2=$1;
$next =~ s/\"\n$//;
$n = expand($next);
$funpos = index($n, '(');
$pos = index($c2, '",');
if ($funpos && $pos > 0) {
$s1 = substr $c2, 0, $pos + 2;
$s2 = ' ' x ($funpos + 1) . substr $c2, $pos + 2;
$s2 =~ s/^\s+//;
$s2 = ' ' x ($funpos + 1) . $s2 if ($s2 ne "");
print unexpand("$next$s1\n");
print unexpand("$s2\n") if ($s2 ne "");
} else {
print "$next$c2\n";
}
$next="";
next;
} else {
print $next;
}
$next="";
} else {
if (m/\"$/) {
if (!m/\\n\"$/) {
$next=$_;
next;
}
}
}
print $_;
}
</script>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-10-19 03:44:12 +08:00
|
|
|
fmerr("irq: opcode %x response status is not zero Initiating irq recovery process\n",
|
2011-01-11 17:35:22 +08:00
|
|
|
fm_evt_hdr->op);
|
|
|
|
|
|
|
|
mod_timer(&fmdev->irq_info.timer, jiffies + FM_DRV_TX_TIMEOUT);
|
|
|
|
return -1;
|
|
|
|
}
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static inline void fm_irq_common_cmd_resp_helper(struct fmdev *fmdev, u8 stage)
|
|
|
|
{
|
|
|
|
struct sk_buff *skb;
|
|
|
|
|
|
|
|
if (!check_cmdresp_status(fmdev, &skb))
|
|
|
|
fm_irq_call_stage(fmdev, stage);
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Interrupt process timeout handler.
|
|
|
|
* One of the irq handler did not get proper response from the chip. So take
|
|
|
|
* recovery action here. FM interrupts are disabled in the beginning of
|
|
|
|
* interrupt process. Therefore reset stage index to re-enable default
|
|
|
|
* interrupts. So that next interrupt will be processed as usual.
|
|
|
|
*/
|
2017-10-24 23:23:03 +08:00
|
|
|
static void int_timeout_handler(struct timer_list *t)
|
2011-01-11 17:35:22 +08:00
|
|
|
{
|
|
|
|
struct fmdev *fmdev;
|
|
|
|
struct fm_irq *fmirq;
|
|
|
|
|
|
|
|
fmdbg("irq: timeout,trying to re-enable fm interrupts\n");
|
2017-10-24 23:23:03 +08:00
|
|
|
fmdev = from_timer(fmdev, t, irq_info.timer);
|
2011-01-11 17:35:22 +08:00
|
|
|
fmirq = &fmdev->irq_info;
|
|
|
|
fmirq->retry++;
|
|
|
|
|
|
|
|
if (fmirq->retry > FM_IRQ_TIMEOUT_RETRY_MAX) {
|
|
|
|
/* Stop recovery action (interrupt reenable process) and
|
|
|
|
* reset stage index & retry count values */
|
|
|
|
fmirq->stage = 0;
|
|
|
|
fmirq->retry = 0;
|
[media] wl128x: don't break long lines
Due to the 80-cols restrictions, and latter due to checkpatch
warnings, several strings were broken into multiple lines. This
is not considered a good practice anymore, as it makes harder
to grep for strings at the source code.
As we're right now fixing other drivers due to KERN_CONT, we need
to be able to identify what printk strings don't end with a "\n".
It is a way easier to detect those if we don't break long lines.
So, join those continuation lines.
The patch was generated via the script below, and manually
adjusted if needed.
</script>
use Text::Tabs;
while (<>) {
if ($next ne "") {
$c=$_;
if ($c =~ /^\s+\"(.*)/) {
$c2=$1;
$next =~ s/\"\n$//;
$n = expand($next);
$funpos = index($n, '(');
$pos = index($c2, '",');
if ($funpos && $pos > 0) {
$s1 = substr $c2, 0, $pos + 2;
$s2 = ' ' x ($funpos + 1) . substr $c2, $pos + 2;
$s2 =~ s/^\s+//;
$s2 = ' ' x ($funpos + 1) . $s2 if ($s2 ne "");
print unexpand("$next$s1\n");
print unexpand("$s2\n") if ($s2 ne "");
} else {
print "$next$c2\n";
}
$next="";
next;
} else {
print $next;
}
$next="";
} else {
if (m/\"$/) {
if (!m/\\n\"$/) {
$next=$_;
next;
}
}
}
print $_;
}
</script>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-10-19 03:44:12 +08:00
|
|
|
fmerr("Recovery action failed duringirq processing, max retry reached\n");
|
2011-01-11 17:35:22 +08:00
|
|
|
return;
|
|
|
|
}
|
|
|
|
fm_irq_call_stage(fmdev, FM_SEND_INTMSK_CMD_IDX);
|
|
|
|
}
|
|
|
|
|
|
|
|
/* --------- FM interrupt handlers ------------*/
|
|
|
|
static void fm_irq_send_flag_getcmd(struct fmdev *fmdev)
|
|
|
|
{
|
|
|
|
u16 flag;
|
|
|
|
|
|
|
|
/* Send FLAG_GET command , to know the source of interrupt */
|
|
|
|
if (!fm_send_cmd(fmdev, FLAG_GET, REG_RD, NULL, sizeof(flag), NULL))
|
|
|
|
fm_irq_timeout_stage(fmdev, FM_HANDLE_FLAG_GETCMD_RESP_IDX);
|
|
|
|
}
|
|
|
|
|
|
|
|
static void fm_irq_handle_flag_getcmd_resp(struct fmdev *fmdev)
|
|
|
|
{
|
|
|
|
struct sk_buff *skb;
|
|
|
|
struct fm_event_msg_hdr *fm_evt_hdr;
|
|
|
|
|
|
|
|
if (check_cmdresp_status(fmdev, &skb))
|
|
|
|
return;
|
|
|
|
|
|
|
|
fm_evt_hdr = (void *)skb->data;
|
|
|
|
|
|
|
|
/* Skip header info and copy only response data */
|
|
|
|
skb_pull(skb, sizeof(struct fm_event_msg_hdr));
|
|
|
|
memcpy(&fmdev->irq_info.flag, skb->data, fm_evt_hdr->dlen);
|
|
|
|
|
2014-08-21 06:20:12 +08:00
|
|
|
fmdev->irq_info.flag = be16_to_cpu((__force __be16)fmdev->irq_info.flag);
|
2011-01-11 17:35:22 +08:00
|
|
|
fmdbg("irq: flag register(0x%x)\n", fmdev->irq_info.flag);
|
|
|
|
|
|
|
|
/* Continue next function in interrupt handler table */
|
|
|
|
fm_irq_call_stage(fmdev, FM_HW_MAL_FUNC_IDX);
|
|
|
|
}
|
|
|
|
|
|
|
|
static void fm_irq_handle_hw_malfunction(struct fmdev *fmdev)
|
|
|
|
{
|
|
|
|
if (fmdev->irq_info.flag & FM_MAL_EVENT & fmdev->irq_info.mask)
|
|
|
|
fmerr("irq: HW MAL int received - do nothing\n");
|
|
|
|
|
|
|
|
/* Continue next function in interrupt handler table */
|
|
|
|
fm_irq_call_stage(fmdev, FM_RDS_START_IDX);
|
|
|
|
}
|
|
|
|
|
|
|
|
static void fm_irq_handle_rds_start(struct fmdev *fmdev)
|
|
|
|
{
|
|
|
|
if (fmdev->irq_info.flag & FM_RDS_EVENT & fmdev->irq_info.mask) {
|
|
|
|
fmdbg("irq: rds threshold reached\n");
|
|
|
|
fmdev->irq_info.stage = FM_RDS_SEND_RDS_GETCMD_IDX;
|
|
|
|
} else {
|
|
|
|
/* Continue next function in interrupt handler table */
|
|
|
|
fmdev->irq_info.stage = FM_HW_TUNE_OP_ENDED_IDX;
|
|
|
|
}
|
|
|
|
|
|
|
|
fm_irq_call(fmdev);
|
|
|
|
}
|
|
|
|
|
|
|
|
static void fm_irq_send_rdsdata_getcmd(struct fmdev *fmdev)
|
|
|
|
{
|
|
|
|
/* Send the command to read RDS data from the chip */
|
|
|
|
if (!fm_send_cmd(fmdev, RDS_DATA_GET, REG_RD, NULL,
|
|
|
|
(FM_RX_RDS_FIFO_THRESHOLD * 3), NULL))
|
|
|
|
fm_irq_timeout_stage(fmdev, FM_RDS_HANDLE_RDS_GETCMD_RESP_IDX);
|
|
|
|
}
|
|
|
|
|
|
|
|
/* Keeps track of current RX channel AF (Alternate Frequency) */
|
|
|
|
static void fm_rx_update_af_cache(struct fmdev *fmdev, u8 af)
|
|
|
|
{
|
|
|
|
struct tuned_station_info *stat_info = &fmdev->rx.stat_info;
|
|
|
|
u8 reg_idx = fmdev->rx.region.fm_band;
|
|
|
|
u8 index;
|
|
|
|
u32 freq;
|
|
|
|
|
|
|
|
/* First AF indicates the number of AF follows. Reset the list */
|
|
|
|
if ((af >= FM_RDS_1_AF_FOLLOWS) && (af <= FM_RDS_25_AF_FOLLOWS)) {
|
|
|
|
fmdev->rx.stat_info.af_list_max = (af - FM_RDS_1_AF_FOLLOWS + 1);
|
|
|
|
fmdev->rx.stat_info.afcache_size = 0;
|
|
|
|
fmdbg("No of expected AF : %d\n", fmdev->rx.stat_info.af_list_max);
|
|
|
|
return;
|
|
|
|
}
|
|
|
|
|
|
|
|
if (af < FM_RDS_MIN_AF)
|
|
|
|
return;
|
|
|
|
if (reg_idx == FM_BAND_EUROPE_US && af > FM_RDS_MAX_AF)
|
|
|
|
return;
|
|
|
|
if (reg_idx == FM_BAND_JAPAN && af > FM_RDS_MAX_AF_JAPAN)
|
|
|
|
return;
|
|
|
|
|
|
|
|
freq = fmdev->rx.region.bot_freq + (af * 100);
|
|
|
|
if (freq == fmdev->rx.freq) {
|
|
|
|
fmdbg("Current freq(%d) is matching with received AF(%d)\n",
|
|
|
|
fmdev->rx.freq, freq);
|
|
|
|
return;
|
|
|
|
}
|
|
|
|
/* Do check in AF cache */
|
|
|
|
for (index = 0; index < stat_info->afcache_size; index++) {
|
|
|
|
if (stat_info->af_cache[index] == freq)
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
/* Reached the limit of the list - ignore the next AF */
|
|
|
|
if (index == stat_info->af_list_max) {
|
|
|
|
fmdbg("AF cache is full\n");
|
|
|
|
return;
|
|
|
|
}
|
|
|
|
/*
|
|
|
|
* If we reached the end of the list then this AF is not
|
|
|
|
* in the list - add it.
|
|
|
|
*/
|
|
|
|
if (index == stat_info->afcache_size) {
|
|
|
|
fmdbg("Storing AF %d to cache index %d\n", freq, index);
|
|
|
|
stat_info->af_cache[index] = freq;
|
|
|
|
stat_info->afcache_size++;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Converts RDS buffer data from big endian format
|
|
|
|
* to little endian format.
|
|
|
|
*/
|
|
|
|
static void fm_rdsparse_swapbytes(struct fmdev *fmdev,
|
|
|
|
struct fm_rdsdata_format *rds_format)
|
|
|
|
{
|
|
|
|
u8 index = 0;
|
|
|
|
u8 *rds_buff;
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Since in Orca the 2 RDS Data bytes are in little endian and
|
|
|
|
* in Dolphin they are in big endian, the parsing of the RDS data
|
|
|
|
* is chip dependent
|
|
|
|
*/
|
|
|
|
if (fmdev->asci_id != 0x6350) {
|
|
|
|
rds_buff = &rds_format->data.groupdatabuff.buff[0];
|
|
|
|
while (index + 1 < FM_RX_RDS_INFO_FIELD_MAX) {
|
2015-06-11 00:32:39 +08:00
|
|
|
swap(rds_buff[index], rds_buff[index + 1]);
|
2011-01-11 17:35:22 +08:00
|
|
|
index += 2;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
static void fm_irq_handle_rdsdata_getcmd_resp(struct fmdev *fmdev)
|
|
|
|
{
|
|
|
|
struct sk_buff *skb;
|
|
|
|
struct fm_rdsdata_format rds_fmt;
|
|
|
|
struct fm_rds *rds = &fmdev->rx.rds;
|
|
|
|
unsigned long group_idx, flags;
|
2013-05-08 04:57:08 +08:00
|
|
|
u8 *rds_data, meta_data, tmpbuf[FM_RDS_BLK_SIZE];
|
2011-01-11 17:35:22 +08:00
|
|
|
u8 type, blk_idx;
|
|
|
|
u16 cur_picode;
|
|
|
|
u32 rds_len;
|
|
|
|
|
|
|
|
if (check_cmdresp_status(fmdev, &skb))
|
|
|
|
return;
|
|
|
|
|
|
|
|
/* Skip header info */
|
|
|
|
skb_pull(skb, sizeof(struct fm_event_msg_hdr));
|
|
|
|
rds_data = skb->data;
|
|
|
|
rds_len = skb->len;
|
|
|
|
|
|
|
|
/* Parse the RDS data */
|
|
|
|
while (rds_len >= FM_RDS_BLK_SIZE) {
|
|
|
|
meta_data = rds_data[2];
|
|
|
|
/* Get the type: 0=A, 1=B, 2=C, 3=C', 4=D, 5=E */
|
|
|
|
type = (meta_data & 0x07);
|
|
|
|
|
|
|
|
/* Transform the blk type into index sequence (0, 1, 2, 3, 4) */
|
|
|
|
blk_idx = (type <= FM_RDS_BLOCK_C ? type : (type - 1));
|
|
|
|
fmdbg("Block index:%d(%s)\n", blk_idx,
|
|
|
|
(meta_data & FM_RDS_STATUS_ERR_MASK) ? "Bad" : "Ok");
|
|
|
|
|
|
|
|
if ((meta_data & FM_RDS_STATUS_ERR_MASK) != 0)
|
|
|
|
break;
|
|
|
|
|
2012-10-28 03:43:41 +08:00
|
|
|
if (blk_idx > FM_RDS_BLK_IDX_D) {
|
2011-01-11 17:35:22 +08:00
|
|
|
fmdbg("Block sequence mismatch\n");
|
|
|
|
rds->last_blk_idx = -1;
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* Skip checkword (control) byte and copy only data byte */
|
|
|
|
memcpy(&rds_fmt.data.groupdatabuff.
|
|
|
|
buff[blk_idx * (FM_RDS_BLK_SIZE - 1)],
|
|
|
|
rds_data, (FM_RDS_BLK_SIZE - 1));
|
|
|
|
|
|
|
|
rds->last_blk_idx = blk_idx;
|
|
|
|
|
|
|
|
/* If completed a whole group then handle it */
|
|
|
|
if (blk_idx == FM_RDS_BLK_IDX_D) {
|
|
|
|
fmdbg("Good block received\n");
|
|
|
|
fm_rdsparse_swapbytes(fmdev, &rds_fmt);
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Extract PI code and store in local cache.
|
|
|
|
* We need this during AF switch processing.
|
|
|
|
*/
|
2014-08-21 06:20:12 +08:00
|
|
|
cur_picode = be16_to_cpu((__force __be16)rds_fmt.data.groupgeneral.pidata);
|
2011-01-11 17:35:22 +08:00
|
|
|
if (fmdev->rx.stat_info.picode != cur_picode)
|
|
|
|
fmdev->rx.stat_info.picode = cur_picode;
|
|
|
|
|
|
|
|
fmdbg("picode:%d\n", cur_picode);
|
|
|
|
|
|
|
|
group_idx = (rds_fmt.data.groupgeneral.blk_b[0] >> 3);
|
|
|
|
fmdbg("(fmdrv):Group:%ld%s\n", group_idx/2,
|
|
|
|
(group_idx % 2) ? "B" : "A");
|
|
|
|
|
|
|
|
group_idx = 1 << (rds_fmt.data.groupgeneral.blk_b[0] >> 3);
|
|
|
|
if (group_idx == FM_RDS_GROUP_TYPE_MASK_0A) {
|
|
|
|
fm_rx_update_af_cache(fmdev, rds_fmt.data.group0A.af[0]);
|
|
|
|
fm_rx_update_af_cache(fmdev, rds_fmt.data.group0A.af[1]);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
rds_len -= FM_RDS_BLK_SIZE;
|
|
|
|
rds_data += FM_RDS_BLK_SIZE;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* Copy raw rds data to internal rds buffer */
|
|
|
|
rds_data = skb->data;
|
|
|
|
rds_len = skb->len;
|
|
|
|
|
|
|
|
spin_lock_irqsave(&fmdev->rds_buff_lock, flags);
|
|
|
|
while (rds_len > 0) {
|
|
|
|
/*
|
|
|
|
* Fill RDS buffer as per V4L2 specification.
|
|
|
|
* Store control byte
|
|
|
|
*/
|
|
|
|
type = (rds_data[2] & 0x07);
|
|
|
|
blk_idx = (type <= FM_RDS_BLOCK_C ? type : (type - 1));
|
|
|
|
tmpbuf[2] = blk_idx; /* Offset name */
|
|
|
|
tmpbuf[2] |= blk_idx << 3; /* Received offset */
|
|
|
|
|
|
|
|
/* Store data byte */
|
|
|
|
tmpbuf[0] = rds_data[0];
|
|
|
|
tmpbuf[1] = rds_data[1];
|
|
|
|
|
|
|
|
memcpy(&rds->buff[rds->wr_idx], &tmpbuf, FM_RDS_BLK_SIZE);
|
|
|
|
rds->wr_idx = (rds->wr_idx + FM_RDS_BLK_SIZE) % rds->buf_size;
|
|
|
|
|
|
|
|
/* Check for overflow & start over */
|
|
|
|
if (rds->wr_idx == rds->rd_idx) {
|
|
|
|
fmdbg("RDS buffer overflow\n");
|
|
|
|
rds->wr_idx = 0;
|
|
|
|
rds->rd_idx = 0;
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
rds_len -= FM_RDS_BLK_SIZE;
|
|
|
|
rds_data += FM_RDS_BLK_SIZE;
|
|
|
|
}
|
|
|
|
spin_unlock_irqrestore(&fmdev->rds_buff_lock, flags);
|
|
|
|
|
|
|
|
/* Wakeup read queue */
|
|
|
|
if (rds->wr_idx != rds->rd_idx)
|
|
|
|
wake_up_interruptible(&rds->read_queue);
|
|
|
|
|
|
|
|
fm_irq_call_stage(fmdev, FM_RDS_FINISH_IDX);
|
|
|
|
}
|
|
|
|
|
|
|
|
static void fm_irq_handle_rds_finish(struct fmdev *fmdev)
|
|
|
|
{
|
|
|
|
fm_irq_call_stage(fmdev, FM_HW_TUNE_OP_ENDED_IDX);
|
|
|
|
}
|
|
|
|
|
|
|
|
static void fm_irq_handle_tune_op_ended(struct fmdev *fmdev)
|
|
|
|
{
|
|
|
|
if (fmdev->irq_info.flag & (FM_FR_EVENT | FM_BL_EVENT) & fmdev->
|
|
|
|
irq_info.mask) {
|
|
|
|
fmdbg("irq: tune ended/bandlimit reached\n");
|
|
|
|
if (test_and_clear_bit(FM_AF_SWITCH_INPROGRESS, &fmdev->flag)) {
|
|
|
|
fmdev->irq_info.stage = FM_AF_JUMP_RD_FREQ_IDX;
|
|
|
|
} else {
|
|
|
|
complete(&fmdev->maintask_comp);
|
|
|
|
fmdev->irq_info.stage = FM_HW_POWER_ENB_IDX;
|
|
|
|
}
|
|
|
|
} else
|
|
|
|
fmdev->irq_info.stage = FM_HW_POWER_ENB_IDX;
|
|
|
|
|
|
|
|
fm_irq_call(fmdev);
|
|
|
|
}
|
|
|
|
|
|
|
|
static void fm_irq_handle_power_enb(struct fmdev *fmdev)
|
|
|
|
{
|
|
|
|
if (fmdev->irq_info.flag & FM_POW_ENB_EVENT) {
|
|
|
|
fmdbg("irq: Power Enabled/Disabled\n");
|
|
|
|
complete(&fmdev->maintask_comp);
|
|
|
|
}
|
|
|
|
|
|
|
|
fm_irq_call_stage(fmdev, FM_LOW_RSSI_START_IDX);
|
|
|
|
}
|
|
|
|
|
|
|
|
static void fm_irq_handle_low_rssi_start(struct fmdev *fmdev)
|
|
|
|
{
|
|
|
|
if ((fmdev->rx.af_mode == FM_RX_RDS_AF_SWITCH_MODE_ON) &&
|
|
|
|
(fmdev->irq_info.flag & FM_LEV_EVENT & fmdev->irq_info.mask) &&
|
|
|
|
(fmdev->rx.freq != FM_UNDEFINED_FREQ) &&
|
|
|
|
(fmdev->rx.stat_info.afcache_size != 0)) {
|
|
|
|
fmdbg("irq: rssi level has fallen below threshold level\n");
|
|
|
|
|
|
|
|
/* Disable further low RSSI interrupts */
|
|
|
|
fmdev->irq_info.mask &= ~FM_LEV_EVENT;
|
|
|
|
|
|
|
|
fmdev->rx.afjump_idx = 0;
|
|
|
|
fmdev->rx.freq_before_jump = fmdev->rx.freq;
|
|
|
|
fmdev->irq_info.stage = FM_AF_JUMP_SETPI_IDX;
|
|
|
|
} else {
|
|
|
|
/* Continue next function in interrupt handler table */
|
|
|
|
fmdev->irq_info.stage = FM_SEND_INTMSK_CMD_IDX;
|
|
|
|
}
|
|
|
|
|
|
|
|
fm_irq_call(fmdev);
|
|
|
|
}
|
|
|
|
|
|
|
|
static void fm_irq_afjump_set_pi(struct fmdev *fmdev)
|
|
|
|
{
|
|
|
|
u16 payload;
|
|
|
|
|
|
|
|
/* Set PI code - must be updated if the AF list is not empty */
|
|
|
|
payload = fmdev->rx.stat_info.picode;
|
|
|
|
if (!fm_send_cmd(fmdev, RDS_PI_SET, REG_WR, &payload, sizeof(payload), NULL))
|
|
|
|
fm_irq_timeout_stage(fmdev, FM_AF_JUMP_HANDLE_SETPI_RESP_IDX);
|
|
|
|
}
|
|
|
|
|
|
|
|
static void fm_irq_handle_set_pi_resp(struct fmdev *fmdev)
|
|
|
|
{
|
|
|
|
fm_irq_common_cmd_resp_helper(fmdev, FM_AF_JUMP_SETPI_MASK_IDX);
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Set PI mask.
|
|
|
|
* 0xFFFF = Enable PI code matching
|
|
|
|
* 0x0000 = Disable PI code matching
|
|
|
|
*/
|
|
|
|
static void fm_irq_afjump_set_pimask(struct fmdev *fmdev)
|
|
|
|
{
|
|
|
|
u16 payload;
|
|
|
|
|
|
|
|
payload = 0x0000;
|
|
|
|
if (!fm_send_cmd(fmdev, RDS_PI_MASK_SET, REG_WR, &payload, sizeof(payload), NULL))
|
|
|
|
fm_irq_timeout_stage(fmdev, FM_AF_JUMP_HANDLE_SETPI_MASK_RESP_IDX);
|
|
|
|
}
|
|
|
|
|
|
|
|
static void fm_irq_handle_set_pimask_resp(struct fmdev *fmdev)
|
|
|
|
{
|
|
|
|
fm_irq_common_cmd_resp_helper(fmdev, FM_AF_JUMP_SET_AF_FREQ_IDX);
|
|
|
|
}
|
|
|
|
|
|
|
|
static void fm_irq_afjump_setfreq(struct fmdev *fmdev)
|
|
|
|
{
|
|
|
|
u16 frq_index;
|
|
|
|
u16 payload;
|
|
|
|
|
|
|
|
fmdbg("Swtich to %d KHz\n", fmdev->rx.stat_info.af_cache[fmdev->rx.afjump_idx]);
|
|
|
|
frq_index = (fmdev->rx.stat_info.af_cache[fmdev->rx.afjump_idx] -
|
|
|
|
fmdev->rx.region.bot_freq) / FM_FREQ_MUL;
|
|
|
|
|
|
|
|
payload = frq_index;
|
|
|
|
if (!fm_send_cmd(fmdev, AF_FREQ_SET, REG_WR, &payload, sizeof(payload), NULL))
|
|
|
|
fm_irq_timeout_stage(fmdev, FM_AF_JUMP_HANDLE_SET_AFFREQ_RESP_IDX);
|
|
|
|
}
|
|
|
|
|
|
|
|
static void fm_irq_handle_setfreq_resp(struct fmdev *fmdev)
|
|
|
|
{
|
|
|
|
fm_irq_common_cmd_resp_helper(fmdev, FM_AF_JUMP_ENABLE_INT_IDX);
|
|
|
|
}
|
|
|
|
|
|
|
|
static void fm_irq_afjump_enableint(struct fmdev *fmdev)
|
|
|
|
{
|
|
|
|
u16 payload;
|
|
|
|
|
|
|
|
/* Enable FR (tuning operation ended) interrupt */
|
|
|
|
payload = FM_FR_EVENT;
|
|
|
|
if (!fm_send_cmd(fmdev, INT_MASK_SET, REG_WR, &payload, sizeof(payload), NULL))
|
|
|
|
fm_irq_timeout_stage(fmdev, FM_AF_JUMP_ENABLE_INT_RESP_IDX);
|
|
|
|
}
|
|
|
|
|
|
|
|
static void fm_irq_afjump_enableint_resp(struct fmdev *fmdev)
|
|
|
|
{
|
|
|
|
fm_irq_common_cmd_resp_helper(fmdev, FM_AF_JUMP_START_AFJUMP_IDX);
|
|
|
|
}
|
|
|
|
|
|
|
|
static void fm_irq_start_afjump(struct fmdev *fmdev)
|
|
|
|
{
|
|
|
|
u16 payload;
|
|
|
|
|
|
|
|
payload = FM_TUNER_AF_JUMP_MODE;
|
|
|
|
if (!fm_send_cmd(fmdev, TUNER_MODE_SET, REG_WR, &payload,
|
|
|
|
sizeof(payload), NULL))
|
|
|
|
fm_irq_timeout_stage(fmdev, FM_AF_JUMP_HANDLE_START_AFJUMP_RESP_IDX);
|
|
|
|
}
|
|
|
|
|
|
|
|
static void fm_irq_handle_start_afjump_resp(struct fmdev *fmdev)
|
|
|
|
{
|
|
|
|
struct sk_buff *skb;
|
|
|
|
|
|
|
|
if (check_cmdresp_status(fmdev, &skb))
|
|
|
|
return;
|
|
|
|
|
|
|
|
fmdev->irq_info.stage = FM_SEND_FLAG_GETCMD_IDX;
|
|
|
|
set_bit(FM_AF_SWITCH_INPROGRESS, &fmdev->flag);
|
|
|
|
clear_bit(FM_INTTASK_RUNNING, &fmdev->flag);
|
|
|
|
}
|
|
|
|
|
|
|
|
static void fm_irq_afjump_rd_freq(struct fmdev *fmdev)
|
|
|
|
{
|
|
|
|
u16 payload;
|
|
|
|
|
|
|
|
if (!fm_send_cmd(fmdev, FREQ_SET, REG_RD, NULL, sizeof(payload), NULL))
|
|
|
|
fm_irq_timeout_stage(fmdev, FM_AF_JUMP_RD_FREQ_RESP_IDX);
|
|
|
|
}
|
|
|
|
|
|
|
|
static void fm_irq_afjump_rd_freq_resp(struct fmdev *fmdev)
|
|
|
|
{
|
|
|
|
struct sk_buff *skb;
|
|
|
|
u16 read_freq;
|
|
|
|
u32 curr_freq, jumped_freq;
|
|
|
|
|
|
|
|
if (check_cmdresp_status(fmdev, &skb))
|
|
|
|
return;
|
|
|
|
|
|
|
|
/* Skip header info and copy only response data */
|
|
|
|
skb_pull(skb, sizeof(struct fm_event_msg_hdr));
|
|
|
|
memcpy(&read_freq, skb->data, sizeof(read_freq));
|
2014-08-21 06:20:12 +08:00
|
|
|
read_freq = be16_to_cpu((__force __be16)read_freq);
|
2011-01-11 17:35:22 +08:00
|
|
|
curr_freq = fmdev->rx.region.bot_freq + ((u32)read_freq * FM_FREQ_MUL);
|
|
|
|
|
|
|
|
jumped_freq = fmdev->rx.stat_info.af_cache[fmdev->rx.afjump_idx];
|
|
|
|
|
|
|
|
/* If the frequency was changed the jump succeeded */
|
|
|
|
if ((curr_freq != fmdev->rx.freq_before_jump) && (curr_freq == jumped_freq)) {
|
|
|
|
fmdbg("Successfully switched to alternate freq %d\n", curr_freq);
|
|
|
|
fmdev->rx.freq = curr_freq;
|
|
|
|
fm_rx_reset_rds_cache(fmdev);
|
|
|
|
|
|
|
|
/* AF feature is on, enable low level RSSI interrupt */
|
|
|
|
if (fmdev->rx.af_mode == FM_RX_RDS_AF_SWITCH_MODE_ON)
|
|
|
|
fmdev->irq_info.mask |= FM_LEV_EVENT;
|
|
|
|
|
|
|
|
fmdev->irq_info.stage = FM_LOW_RSSI_FINISH_IDX;
|
|
|
|
} else { /* jump to the next freq in the AF list */
|
|
|
|
fmdev->rx.afjump_idx++;
|
|
|
|
|
|
|
|
/* If we reached the end of the list - stop searching */
|
|
|
|
if (fmdev->rx.afjump_idx >= fmdev->rx.stat_info.afcache_size) {
|
|
|
|
fmdbg("AF switch processing failed\n");
|
|
|
|
fmdev->irq_info.stage = FM_LOW_RSSI_FINISH_IDX;
|
|
|
|
} else { /* AF List is not over - try next one */
|
|
|
|
|
|
|
|
fmdbg("Trying next freq in AF cache\n");
|
|
|
|
fmdev->irq_info.stage = FM_AF_JUMP_SETPI_IDX;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
fm_irq_call(fmdev);
|
|
|
|
}
|
|
|
|
|
|
|
|
static void fm_irq_handle_low_rssi_finish(struct fmdev *fmdev)
|
|
|
|
{
|
|
|
|
fm_irq_call_stage(fmdev, FM_SEND_INTMSK_CMD_IDX);
|
|
|
|
}
|
|
|
|
|
|
|
|
static void fm_irq_send_intmsk_cmd(struct fmdev *fmdev)
|
|
|
|
{
|
|
|
|
u16 payload;
|
|
|
|
|
|
|
|
/* Re-enable FM interrupts */
|
|
|
|
payload = fmdev->irq_info.mask;
|
|
|
|
|
|
|
|
if (!fm_send_cmd(fmdev, INT_MASK_SET, REG_WR, &payload,
|
|
|
|
sizeof(payload), NULL))
|
|
|
|
fm_irq_timeout_stage(fmdev, FM_HANDLE_INTMSK_CMD_RESP_IDX);
|
|
|
|
}
|
|
|
|
|
|
|
|
static void fm_irq_handle_intmsk_cmd_resp(struct fmdev *fmdev)
|
|
|
|
{
|
|
|
|
struct sk_buff *skb;
|
|
|
|
|
|
|
|
if (check_cmdresp_status(fmdev, &skb))
|
|
|
|
return;
|
|
|
|
/*
|
|
|
|
* This is last function in interrupt table to be executed.
|
|
|
|
* So, reset stage index to 0.
|
|
|
|
*/
|
|
|
|
fmdev->irq_info.stage = FM_SEND_FLAG_GETCMD_IDX;
|
|
|
|
|
|
|
|
/* Start processing any pending interrupt */
|
|
|
|
if (test_and_clear_bit(FM_INTTASK_SCHEDULE_PENDING, &fmdev->flag))
|
|
|
|
fmdev->irq_info.handlers[fmdev->irq_info.stage](fmdev);
|
|
|
|
else
|
|
|
|
clear_bit(FM_INTTASK_RUNNING, &fmdev->flag);
|
|
|
|
}
|
|
|
|
|
|
|
|
/* Returns availability of RDS data in internel buffer */
|
2011-12-02 17:01:11 +08:00
|
|
|
int fmc_is_rds_data_available(struct fmdev *fmdev, struct file *file,
|
2011-01-11 17:35:22 +08:00
|
|
|
struct poll_table_struct *pts)
|
|
|
|
{
|
|
|
|
poll_wait(file, &fmdev->rx.rds.read_queue, pts);
|
|
|
|
if (fmdev->rx.rds.rd_idx != fmdev->rx.rds.wr_idx)
|
|
|
|
return 0;
|
|
|
|
|
|
|
|
return -EAGAIN;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* Copies RDS data from internal buffer to user buffer */
|
2011-12-02 17:01:11 +08:00
|
|
|
int fmc_transfer_rds_from_internal_buff(struct fmdev *fmdev, struct file *file,
|
2011-01-11 17:35:22 +08:00
|
|
|
u8 __user *buf, size_t count)
|
|
|
|
{
|
|
|
|
u32 block_count;
|
2013-05-08 04:57:08 +08:00
|
|
|
u8 tmpbuf[FM_RDS_BLK_SIZE];
|
2011-01-11 17:35:22 +08:00
|
|
|
unsigned long flags;
|
|
|
|
int ret;
|
|
|
|
|
|
|
|
if (fmdev->rx.rds.wr_idx == fmdev->rx.rds.rd_idx) {
|
|
|
|
if (file->f_flags & O_NONBLOCK)
|
|
|
|
return -EWOULDBLOCK;
|
|
|
|
|
|
|
|
ret = wait_event_interruptible(fmdev->rx.rds.read_queue,
|
|
|
|
(fmdev->rx.rds.wr_idx != fmdev->rx.rds.rd_idx));
|
|
|
|
if (ret)
|
|
|
|
return -EINTR;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* Calculate block count from byte count */
|
2013-05-08 04:57:08 +08:00
|
|
|
count /= FM_RDS_BLK_SIZE;
|
2011-01-11 17:35:22 +08:00
|
|
|
block_count = 0;
|
|
|
|
ret = 0;
|
|
|
|
|
|
|
|
while (block_count < count) {
|
2013-05-08 04:57:08 +08:00
|
|
|
spin_lock_irqsave(&fmdev->rds_buff_lock, flags);
|
2011-01-11 17:35:22 +08:00
|
|
|
|
2013-05-08 04:57:08 +08:00
|
|
|
if (fmdev->rx.rds.wr_idx == fmdev->rx.rds.rd_idx) {
|
|
|
|
spin_unlock_irqrestore(&fmdev->rds_buff_lock, flags);
|
2011-01-11 17:35:22 +08:00
|
|
|
break;
|
2013-05-08 04:57:08 +08:00
|
|
|
}
|
|
|
|
memcpy(tmpbuf, &fmdev->rx.rds.buff[fmdev->rx.rds.rd_idx],
|
|
|
|
FM_RDS_BLK_SIZE);
|
2011-01-11 17:35:22 +08:00
|
|
|
fmdev->rx.rds.rd_idx += FM_RDS_BLK_SIZE;
|
|
|
|
if (fmdev->rx.rds.rd_idx >= fmdev->rx.rds.buf_size)
|
|
|
|
fmdev->rx.rds.rd_idx = 0;
|
|
|
|
|
2013-05-08 04:57:08 +08:00
|
|
|
spin_unlock_irqrestore(&fmdev->rds_buff_lock, flags);
|
|
|
|
|
|
|
|
if (copy_to_user(buf, tmpbuf, FM_RDS_BLK_SIZE))
|
|
|
|
break;
|
|
|
|
|
2011-01-11 17:35:22 +08:00
|
|
|
block_count++;
|
|
|
|
buf += FM_RDS_BLK_SIZE;
|
|
|
|
ret += FM_RDS_BLK_SIZE;
|
|
|
|
}
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
2011-12-02 17:01:11 +08:00
|
|
|
int fmc_set_freq(struct fmdev *fmdev, u32 freq_to_set)
|
2011-01-11 17:35:22 +08:00
|
|
|
{
|
|
|
|
switch (fmdev->curr_fmmode) {
|
|
|
|
case FM_MODE_RX:
|
|
|
|
return fm_rx_set_freq(fmdev, freq_to_set);
|
|
|
|
|
|
|
|
case FM_MODE_TX:
|
|
|
|
return fm_tx_set_freq(fmdev, freq_to_set);
|
|
|
|
|
|
|
|
default:
|
|
|
|
return -EINVAL;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
2011-12-02 17:01:11 +08:00
|
|
|
int fmc_get_freq(struct fmdev *fmdev, u32 *cur_tuned_frq)
|
2011-01-11 17:35:22 +08:00
|
|
|
{
|
|
|
|
if (fmdev->rx.freq == FM_UNDEFINED_FREQ) {
|
|
|
|
fmerr("RX frequency is not set\n");
|
|
|
|
return -EPERM;
|
|
|
|
}
|
|
|
|
if (cur_tuned_frq == NULL) {
|
|
|
|
fmerr("Invalid memory\n");
|
|
|
|
return -ENOMEM;
|
|
|
|
}
|
|
|
|
|
|
|
|
switch (fmdev->curr_fmmode) {
|
|
|
|
case FM_MODE_RX:
|
|
|
|
*cur_tuned_frq = fmdev->rx.freq;
|
|
|
|
return 0;
|
|
|
|
|
|
|
|
case FM_MODE_TX:
|
|
|
|
*cur_tuned_frq = 0; /* TODO : Change this later */
|
|
|
|
return 0;
|
|
|
|
|
|
|
|
default:
|
|
|
|
return -EINVAL;
|
|
|
|
}
|
|
|
|
|
|
|
|
}
|
|
|
|
|
2011-12-02 17:01:11 +08:00
|
|
|
int fmc_set_region(struct fmdev *fmdev, u8 region_to_set)
|
2011-01-11 17:35:22 +08:00
|
|
|
{
|
|
|
|
switch (fmdev->curr_fmmode) {
|
|
|
|
case FM_MODE_RX:
|
|
|
|
return fm_rx_set_region(fmdev, region_to_set);
|
|
|
|
|
|
|
|
case FM_MODE_TX:
|
|
|
|
return fm_tx_set_region(fmdev, region_to_set);
|
|
|
|
|
|
|
|
default:
|
|
|
|
return -EINVAL;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
2011-12-02 17:01:11 +08:00
|
|
|
int fmc_set_mute_mode(struct fmdev *fmdev, u8 mute_mode_toset)
|
2011-01-11 17:35:22 +08:00
|
|
|
{
|
|
|
|
switch (fmdev->curr_fmmode) {
|
|
|
|
case FM_MODE_RX:
|
|
|
|
return fm_rx_set_mute_mode(fmdev, mute_mode_toset);
|
|
|
|
|
|
|
|
case FM_MODE_TX:
|
|
|
|
return fm_tx_set_mute_mode(fmdev, mute_mode_toset);
|
|
|
|
|
|
|
|
default:
|
|
|
|
return -EINVAL;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
2011-12-02 17:01:11 +08:00
|
|
|
int fmc_set_stereo_mono(struct fmdev *fmdev, u16 mode)
|
2011-01-11 17:35:22 +08:00
|
|
|
{
|
|
|
|
switch (fmdev->curr_fmmode) {
|
|
|
|
case FM_MODE_RX:
|
|
|
|
return fm_rx_set_stereo_mono(fmdev, mode);
|
|
|
|
|
|
|
|
case FM_MODE_TX:
|
|
|
|
return fm_tx_set_stereo_mono(fmdev, mode);
|
|
|
|
|
|
|
|
default:
|
|
|
|
return -EINVAL;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
2011-12-02 17:01:11 +08:00
|
|
|
int fmc_set_rds_mode(struct fmdev *fmdev, u8 rds_en_dis)
|
2011-01-11 17:35:22 +08:00
|
|
|
{
|
|
|
|
switch (fmdev->curr_fmmode) {
|
|
|
|
case FM_MODE_RX:
|
|
|
|
return fm_rx_set_rds_mode(fmdev, rds_en_dis);
|
|
|
|
|
|
|
|
case FM_MODE_TX:
|
|
|
|
return fm_tx_set_rds_mode(fmdev, rds_en_dis);
|
|
|
|
|
|
|
|
default:
|
|
|
|
return -EINVAL;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
/* Sends power off command to the chip */
|
2011-12-02 17:01:11 +08:00
|
|
|
static int fm_power_down(struct fmdev *fmdev)
|
2011-01-11 17:35:22 +08:00
|
|
|
{
|
|
|
|
u16 payload;
|
2011-12-02 17:01:11 +08:00
|
|
|
int ret;
|
2011-01-11 17:35:22 +08:00
|
|
|
|
|
|
|
if (!test_bit(FM_CORE_READY, &fmdev->flag)) {
|
|
|
|
fmerr("FM core is not ready\n");
|
|
|
|
return -EPERM;
|
|
|
|
}
|
|
|
|
if (fmdev->curr_fmmode == FM_MODE_OFF) {
|
|
|
|
fmdbg("FM chip is already in OFF state\n");
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
payload = 0x0;
|
|
|
|
ret = fmc_send_cmd(fmdev, FM_POWER_MODE, REG_WR, &payload,
|
|
|
|
sizeof(payload), NULL, NULL);
|
|
|
|
if (ret < 0)
|
|
|
|
return ret;
|
|
|
|
|
|
|
|
return fmc_release(fmdev);
|
|
|
|
}
|
|
|
|
|
|
|
|
/* Reads init command from FM firmware file and loads to the chip */
|
2011-12-02 17:01:11 +08:00
|
|
|
static int fm_download_firmware(struct fmdev *fmdev, const u8 *fw_name)
|
2011-01-11 17:35:22 +08:00
|
|
|
{
|
|
|
|
const struct firmware *fw_entry;
|
|
|
|
struct bts_header *fw_header;
|
|
|
|
struct bts_action *action;
|
|
|
|
struct bts_action_delay *delay;
|
|
|
|
u8 *fw_data;
|
|
|
|
int ret, fw_len, cmd_cnt;
|
|
|
|
|
|
|
|
cmd_cnt = 0;
|
|
|
|
set_bit(FM_FW_DW_INPROGRESS, &fmdev->flag);
|
|
|
|
|
|
|
|
ret = request_firmware(&fw_entry, fw_name,
|
|
|
|
&fmdev->radio_dev->dev);
|
|
|
|
if (ret < 0) {
|
|
|
|
fmerr("Unable to read firmware(%s) content\n", fw_name);
|
|
|
|
return ret;
|
|
|
|
}
|
2014-10-22 18:58:51 +08:00
|
|
|
fmdbg("Firmware(%s) length : %zu bytes\n", fw_name, fw_entry->size);
|
2011-01-11 17:35:22 +08:00
|
|
|
|
|
|
|
fw_data = (void *)fw_entry->data;
|
|
|
|
fw_len = fw_entry->size;
|
|
|
|
|
|
|
|
fw_header = (struct bts_header *)fw_data;
|
|
|
|
if (fw_header->magic != FM_FW_FILE_HEADER_MAGIC) {
|
|
|
|
fmerr("%s not a legal TI firmware file\n", fw_name);
|
|
|
|
ret = -EINVAL;
|
|
|
|
goto rel_fw;
|
|
|
|
}
|
|
|
|
fmdbg("FW(%s) magic number : 0x%x\n", fw_name, fw_header->magic);
|
|
|
|
|
|
|
|
/* Skip file header info , we already verified it */
|
|
|
|
fw_data += sizeof(struct bts_header);
|
|
|
|
fw_len -= sizeof(struct bts_header);
|
|
|
|
|
|
|
|
while (fw_data && fw_len > 0) {
|
|
|
|
action = (struct bts_action *)fw_data;
|
|
|
|
|
|
|
|
switch (action->type) {
|
|
|
|
case ACTION_SEND_COMMAND: /* Send */
|
|
|
|
if (fmc_send_cmd(fmdev, 0, 0, action->data,
|
|
|
|
action->size, NULL, NULL))
|
|
|
|
goto rel_fw;
|
|
|
|
|
|
|
|
cmd_cnt++;
|
|
|
|
break;
|
|
|
|
|
|
|
|
case ACTION_DELAY: /* Delay */
|
|
|
|
delay = (struct bts_action_delay *)action->data;
|
|
|
|
mdelay(delay->msec);
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
|
|
|
|
fw_data += (sizeof(struct bts_action) + (action->size));
|
|
|
|
fw_len -= (sizeof(struct bts_action) + (action->size));
|
|
|
|
}
|
|
|
|
fmdbg("Firmware commands(%d) loaded to chip\n", cmd_cnt);
|
|
|
|
rel_fw:
|
|
|
|
release_firmware(fw_entry);
|
|
|
|
clear_bit(FM_FW_DW_INPROGRESS, &fmdev->flag);
|
|
|
|
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* Loads default RX configuration to the chip */
|
2011-12-02 17:01:11 +08:00
|
|
|
static int load_default_rx_configuration(struct fmdev *fmdev)
|
2011-01-11 17:35:22 +08:00
|
|
|
{
|
|
|
|
int ret;
|
|
|
|
|
|
|
|
ret = fm_rx_set_volume(fmdev, FM_DEFAULT_RX_VOLUME);
|
|
|
|
if (ret < 0)
|
|
|
|
return ret;
|
|
|
|
|
|
|
|
return fm_rx_set_rssi_threshold(fmdev, FM_DEFAULT_RSSI_THRESHOLD);
|
|
|
|
}
|
|
|
|
|
|
|
|
/* Does FM power on sequence */
|
2011-12-02 17:01:11 +08:00
|
|
|
static int fm_power_up(struct fmdev *fmdev, u8 mode)
|
2011-01-11 17:35:22 +08:00
|
|
|
{
|
2014-08-21 06:20:12 +08:00
|
|
|
u16 payload;
|
|
|
|
__be16 asic_id, asic_ver;
|
2011-01-11 17:35:22 +08:00
|
|
|
int resp_len, ret;
|
|
|
|
u8 fw_name[50];
|
|
|
|
|
|
|
|
if (mode >= FM_MODE_ENTRY_MAX) {
|
|
|
|
fmerr("Invalid firmware download option\n");
|
|
|
|
return -EINVAL;
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Initialize FM common module. FM GPIO toggling is
|
|
|
|
* taken care in Shared Transport driver.
|
|
|
|
*/
|
|
|
|
ret = fmc_prepare(fmdev);
|
|
|
|
if (ret < 0) {
|
|
|
|
fmerr("Unable to prepare FM Common\n");
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
|
|
|
payload = FM_ENABLE;
|
|
|
|
if (fmc_send_cmd(fmdev, FM_POWER_MODE, REG_WR, &payload,
|
|
|
|
sizeof(payload), NULL, NULL))
|
|
|
|
goto rel;
|
|
|
|
|
|
|
|
/* Allow the chip to settle down in Channel-8 mode */
|
|
|
|
msleep(20);
|
|
|
|
|
|
|
|
if (fmc_send_cmd(fmdev, ASIC_ID_GET, REG_RD, NULL,
|
|
|
|
sizeof(asic_id), &asic_id, &resp_len))
|
|
|
|
goto rel;
|
|
|
|
|
|
|
|
if (fmc_send_cmd(fmdev, ASIC_VER_GET, REG_RD, NULL,
|
|
|
|
sizeof(asic_ver), &asic_ver, &resp_len))
|
|
|
|
goto rel;
|
|
|
|
|
|
|
|
fmdbg("ASIC ID: 0x%x , ASIC Version: %d\n",
|
|
|
|
be16_to_cpu(asic_id), be16_to_cpu(asic_ver));
|
|
|
|
|
|
|
|
sprintf(fw_name, "%s_%x.%d.bts", FM_FMC_FW_FILE_START,
|
|
|
|
be16_to_cpu(asic_id), be16_to_cpu(asic_ver));
|
|
|
|
|
|
|
|
ret = fm_download_firmware(fmdev, fw_name);
|
|
|
|
if (ret < 0) {
|
|
|
|
fmdbg("Failed to download firmware file %s\n", fw_name);
|
|
|
|
goto rel;
|
|
|
|
}
|
|
|
|
sprintf(fw_name, "%s_%x.%d.bts", (mode == FM_MODE_RX) ?
|
|
|
|
FM_RX_FW_FILE_START : FM_TX_FW_FILE_START,
|
|
|
|
be16_to_cpu(asic_id), be16_to_cpu(asic_ver));
|
|
|
|
|
|
|
|
ret = fm_download_firmware(fmdev, fw_name);
|
|
|
|
if (ret < 0) {
|
|
|
|
fmdbg("Failed to download firmware file %s\n", fw_name);
|
|
|
|
goto rel;
|
|
|
|
} else
|
|
|
|
return ret;
|
|
|
|
rel:
|
|
|
|
return fmc_release(fmdev);
|
|
|
|
}
|
|
|
|
|
|
|
|
/* Set FM Modes(TX, RX, OFF) */
|
2011-12-02 17:01:11 +08:00
|
|
|
int fmc_set_mode(struct fmdev *fmdev, u8 fm_mode)
|
2011-01-11 17:35:22 +08:00
|
|
|
{
|
|
|
|
int ret = 0;
|
|
|
|
|
|
|
|
if (fm_mode >= FM_MODE_ENTRY_MAX) {
|
|
|
|
fmerr("Invalid FM mode\n");
|
|
|
|
return -EINVAL;
|
|
|
|
}
|
|
|
|
if (fmdev->curr_fmmode == fm_mode) {
|
|
|
|
fmdbg("Already fm is in mode(%d)\n", fm_mode);
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
|
|
|
switch (fm_mode) {
|
|
|
|
case FM_MODE_OFF: /* OFF Mode */
|
|
|
|
ret = fm_power_down(fmdev);
|
|
|
|
if (ret < 0) {
|
|
|
|
fmerr("Failed to set OFF mode\n");
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
break;
|
|
|
|
|
|
|
|
case FM_MODE_TX: /* TX Mode */
|
|
|
|
case FM_MODE_RX: /* RX Mode */
|
|
|
|
/* Power down before switching to TX or RX mode */
|
|
|
|
if (fmdev->curr_fmmode != FM_MODE_OFF) {
|
|
|
|
ret = fm_power_down(fmdev);
|
|
|
|
if (ret < 0) {
|
|
|
|
fmerr("Failed to set OFF mode\n");
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
msleep(30);
|
|
|
|
}
|
|
|
|
ret = fm_power_up(fmdev, fm_mode);
|
|
|
|
if (ret < 0) {
|
|
|
|
fmerr("Failed to load firmware\n");
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
fmdev->curr_fmmode = fm_mode;
|
|
|
|
|
|
|
|
/* Set default configuration */
|
|
|
|
if (fmdev->curr_fmmode == FM_MODE_RX) {
|
|
|
|
fmdbg("Loading default rx configuration..\n");
|
|
|
|
ret = load_default_rx_configuration(fmdev);
|
|
|
|
if (ret < 0)
|
|
|
|
fmerr("Failed to load default values\n");
|
|
|
|
}
|
|
|
|
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* Returns current FM mode (TX, RX, OFF) */
|
2011-12-02 17:01:11 +08:00
|
|
|
int fmc_get_mode(struct fmdev *fmdev, u8 *fmmode)
|
2011-01-11 17:35:22 +08:00
|
|
|
{
|
|
|
|
if (!test_bit(FM_CORE_READY, &fmdev->flag)) {
|
|
|
|
fmerr("FM core is not ready\n");
|
|
|
|
return -EPERM;
|
|
|
|
}
|
|
|
|
if (fmmode == NULL) {
|
|
|
|
fmerr("Invalid memory\n");
|
|
|
|
return -ENOMEM;
|
|
|
|
}
|
|
|
|
|
|
|
|
*fmmode = fmdev->curr_fmmode;
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* Called by ST layer when FM packet is available */
|
|
|
|
static long fm_st_receive(void *arg, struct sk_buff *skb)
|
|
|
|
{
|
|
|
|
struct fmdev *fmdev;
|
|
|
|
|
|
|
|
fmdev = (struct fmdev *)arg;
|
|
|
|
|
|
|
|
if (skb == NULL) {
|
|
|
|
fmerr("Invalid SKB received from ST\n");
|
|
|
|
return -EFAULT;
|
|
|
|
}
|
|
|
|
|
|
|
|
if (skb->cb[0] != FM_PKT_LOGICAL_CHAN_NUMBER) {
|
|
|
|
fmerr("Received SKB (%p) is not FM Channel 8 pkt\n", skb);
|
|
|
|
return -EINVAL;
|
|
|
|
}
|
|
|
|
|
|
|
|
memcpy(skb_push(skb, 1), &skb->cb[0], 1);
|
|
|
|
skb_queue_tail(&fmdev->rx_q, skb);
|
|
|
|
tasklet_schedule(&fmdev->rx_task);
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Called by ST layer to indicate protocol registration completion
|
|
|
|
* status.
|
|
|
|
*/
|
2016-06-06 17:02:03 +08:00
|
|
|
static void fm_st_reg_comp_cb(void *arg, int data)
|
2011-01-11 17:35:22 +08:00
|
|
|
{
|
|
|
|
struct fmdev *fmdev;
|
|
|
|
|
|
|
|
fmdev = (struct fmdev *)arg;
|
|
|
|
fmdev->streg_cbdata = data;
|
|
|
|
complete(&wait_for_fmdrv_reg_comp);
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* This function will be called from FM V4L2 open function.
|
|
|
|
* Register with ST driver and initialize driver data.
|
|
|
|
*/
|
2011-12-02 17:01:11 +08:00
|
|
|
int fmc_prepare(struct fmdev *fmdev)
|
2011-01-11 17:35:22 +08:00
|
|
|
{
|
|
|
|
static struct st_proto_s fm_st_proto;
|
2011-12-02 17:01:11 +08:00
|
|
|
int ret;
|
2011-01-11 17:35:22 +08:00
|
|
|
|
|
|
|
if (test_bit(FM_CORE_READY, &fmdev->flag)) {
|
|
|
|
fmdbg("FM Core is already up\n");
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
memset(&fm_st_proto, 0, sizeof(fm_st_proto));
|
|
|
|
fm_st_proto.recv = fm_st_receive;
|
|
|
|
fm_st_proto.match_packet = NULL;
|
|
|
|
fm_st_proto.reg_complete_cb = fm_st_reg_comp_cb;
|
|
|
|
fm_st_proto.write = NULL; /* TI ST driver will fill write pointer */
|
|
|
|
fm_st_proto.priv_data = fmdev;
|
2011-03-23 18:44:30 +08:00
|
|
|
fm_st_proto.chnl_id = 0x08;
|
|
|
|
fm_st_proto.max_frame_size = 0xff;
|
|
|
|
fm_st_proto.hdr_len = 1;
|
|
|
|
fm_st_proto.offset_len_in_hdr = 0;
|
|
|
|
fm_st_proto.len_size = 1;
|
|
|
|
fm_st_proto.reserve = 1;
|
2011-01-11 17:35:22 +08:00
|
|
|
|
|
|
|
ret = st_register(&fm_st_proto);
|
|
|
|
if (ret == -EINPROGRESS) {
|
|
|
|
init_completion(&wait_for_fmdrv_reg_comp);
|
|
|
|
fmdev->streg_cbdata = -EINPROGRESS;
|
|
|
|
fmdbg("%s waiting for ST reg completion signal\n", __func__);
|
|
|
|
|
2011-12-02 17:01:11 +08:00
|
|
|
if (!wait_for_completion_timeout(&wait_for_fmdrv_reg_comp,
|
|
|
|
FM_ST_REG_TIMEOUT)) {
|
[media] wl128x: don't break long lines
Due to the 80-cols restrictions, and latter due to checkpatch
warnings, several strings were broken into multiple lines. This
is not considered a good practice anymore, as it makes harder
to grep for strings at the source code.
As we're right now fixing other drivers due to KERN_CONT, we need
to be able to identify what printk strings don't end with a "\n".
It is a way easier to detect those if we don't break long lines.
So, join those continuation lines.
The patch was generated via the script below, and manually
adjusted if needed.
</script>
use Text::Tabs;
while (<>) {
if ($next ne "") {
$c=$_;
if ($c =~ /^\s+\"(.*)/) {
$c2=$1;
$next =~ s/\"\n$//;
$n = expand($next);
$funpos = index($n, '(');
$pos = index($c2, '",');
if ($funpos && $pos > 0) {
$s1 = substr $c2, 0, $pos + 2;
$s2 = ' ' x ($funpos + 1) . substr $c2, $pos + 2;
$s2 =~ s/^\s+//;
$s2 = ' ' x ($funpos + 1) . $s2 if ($s2 ne "");
print unexpand("$next$s1\n");
print unexpand("$s2\n") if ($s2 ne "");
} else {
print "$next$c2\n";
}
$next="";
next;
} else {
print $next;
}
$next="";
} else {
if (m/\"$/) {
if (!m/\\n\"$/) {
$next=$_;
next;
}
}
}
print $_;
}
</script>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-10-19 03:44:12 +08:00
|
|
|
fmerr("Timeout(%d sec), didn't get reg completion signal from ST\n",
|
2011-01-11 17:35:22 +08:00
|
|
|
jiffies_to_msecs(FM_ST_REG_TIMEOUT) / 1000);
|
|
|
|
return -ETIMEDOUT;
|
|
|
|
}
|
|
|
|
if (fmdev->streg_cbdata != 0) {
|
[media] wl128x: don't break long lines
Due to the 80-cols restrictions, and latter due to checkpatch
warnings, several strings were broken into multiple lines. This
is not considered a good practice anymore, as it makes harder
to grep for strings at the source code.
As we're right now fixing other drivers due to KERN_CONT, we need
to be able to identify what printk strings don't end with a "\n".
It is a way easier to detect those if we don't break long lines.
So, join those continuation lines.
The patch was generated via the script below, and manually
adjusted if needed.
</script>
use Text::Tabs;
while (<>) {
if ($next ne "") {
$c=$_;
if ($c =~ /^\s+\"(.*)/) {
$c2=$1;
$next =~ s/\"\n$//;
$n = expand($next);
$funpos = index($n, '(');
$pos = index($c2, '",');
if ($funpos && $pos > 0) {
$s1 = substr $c2, 0, $pos + 2;
$s2 = ' ' x ($funpos + 1) . substr $c2, $pos + 2;
$s2 =~ s/^\s+//;
$s2 = ' ' x ($funpos + 1) . $s2 if ($s2 ne "");
print unexpand("$next$s1\n");
print unexpand("$s2\n") if ($s2 ne "");
} else {
print "$next$c2\n";
}
$next="";
next;
} else {
print $next;
}
$next="";
} else {
if (m/\"$/) {
if (!m/\\n\"$/) {
$next=$_;
next;
}
}
}
print $_;
}
</script>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-10-19 03:44:12 +08:00
|
|
|
fmerr("ST reg comp CB called with error status %d\n",
|
|
|
|
fmdev->streg_cbdata);
|
2011-01-11 17:35:22 +08:00
|
|
|
return -EAGAIN;
|
|
|
|
}
|
|
|
|
|
|
|
|
ret = 0;
|
|
|
|
} else if (ret == -1) {
|
|
|
|
fmerr("st_register failed %d\n", ret);
|
|
|
|
return -EAGAIN;
|
|
|
|
}
|
|
|
|
|
|
|
|
if (fm_st_proto.write != NULL) {
|
|
|
|
g_st_write = fm_st_proto.write;
|
|
|
|
} else {
|
|
|
|
fmerr("Failed to get ST write func pointer\n");
|
2011-03-23 18:44:30 +08:00
|
|
|
ret = st_unregister(&fm_st_proto);
|
2011-01-11 17:35:22 +08:00
|
|
|
if (ret < 0)
|
|
|
|
fmerr("st_unregister failed %d\n", ret);
|
|
|
|
return -EAGAIN;
|
|
|
|
}
|
|
|
|
|
|
|
|
spin_lock_init(&fmdev->rds_buff_lock);
|
|
|
|
spin_lock_init(&fmdev->resp_skb_lock);
|
|
|
|
|
|
|
|
/* Initialize TX queue and TX tasklet */
|
|
|
|
skb_queue_head_init(&fmdev->tx_q);
|
|
|
|
tasklet_init(&fmdev->tx_task, send_tasklet, (unsigned long)fmdev);
|
|
|
|
|
|
|
|
/* Initialize RX Queue and RX tasklet */
|
|
|
|
skb_queue_head_init(&fmdev->rx_q);
|
|
|
|
tasklet_init(&fmdev->rx_task, recv_tasklet, (unsigned long)fmdev);
|
|
|
|
|
|
|
|
fmdev->irq_info.stage = 0;
|
|
|
|
atomic_set(&fmdev->tx_cnt, 1);
|
|
|
|
fmdev->resp_comp = NULL;
|
|
|
|
|
2017-10-24 23:23:03 +08:00
|
|
|
timer_setup(&fmdev->irq_info.timer, int_timeout_handler, 0);
|
2011-01-11 17:35:22 +08:00
|
|
|
/*TODO: add FM_STIC_EVENT later */
|
|
|
|
fmdev->irq_info.mask = FM_MAL_EVENT;
|
|
|
|
|
|
|
|
/* Region info */
|
2012-10-24 02:57:26 +08:00
|
|
|
fmdev->rx.region = region_configs[default_radio_region];
|
2011-01-11 17:35:22 +08:00
|
|
|
|
|
|
|
fmdev->rx.mute_mode = FM_MUTE_OFF;
|
|
|
|
fmdev->rx.rf_depend_mute = FM_RX_RF_DEPENDENT_MUTE_OFF;
|
|
|
|
fmdev->rx.rds.flag = FM_RDS_DISABLE;
|
|
|
|
fmdev->rx.freq = FM_UNDEFINED_FREQ;
|
|
|
|
fmdev->rx.rds_mode = FM_RDS_SYSTEM_RDS;
|
|
|
|
fmdev->rx.af_mode = FM_RX_RDS_AF_SWITCH_MODE_OFF;
|
|
|
|
fmdev->irq_info.retry = 0;
|
|
|
|
|
|
|
|
fm_rx_reset_rds_cache(fmdev);
|
|
|
|
init_waitqueue_head(&fmdev->rx.rds.read_queue);
|
|
|
|
|
|
|
|
fm_rx_reset_station_info(fmdev);
|
|
|
|
set_bit(FM_CORE_READY, &fmdev->flag);
|
|
|
|
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* This function will be called from FM V4L2 release function.
|
|
|
|
* Unregister from ST driver.
|
|
|
|
*/
|
2011-12-02 17:01:11 +08:00
|
|
|
int fmc_release(struct fmdev *fmdev)
|
2011-01-11 17:35:22 +08:00
|
|
|
{
|
2011-03-23 18:44:30 +08:00
|
|
|
static struct st_proto_s fm_st_proto;
|
2011-12-02 17:01:11 +08:00
|
|
|
int ret;
|
2011-01-11 17:35:22 +08:00
|
|
|
|
|
|
|
if (!test_bit(FM_CORE_READY, &fmdev->flag)) {
|
|
|
|
fmdbg("FM Core is already down\n");
|
|
|
|
return 0;
|
|
|
|
}
|
2011-03-31 09:57:33 +08:00
|
|
|
/* Service pending read */
|
2011-01-11 17:35:22 +08:00
|
|
|
wake_up_interruptible(&fmdev->rx.rds.read_queue);
|
|
|
|
|
|
|
|
tasklet_kill(&fmdev->tx_task);
|
|
|
|
tasklet_kill(&fmdev->rx_task);
|
|
|
|
|
|
|
|
skb_queue_purge(&fmdev->tx_q);
|
|
|
|
skb_queue_purge(&fmdev->rx_q);
|
|
|
|
|
|
|
|
fmdev->resp_comp = NULL;
|
|
|
|
fmdev->rx.freq = 0;
|
|
|
|
|
2011-03-23 18:44:30 +08:00
|
|
|
memset(&fm_st_proto, 0, sizeof(fm_st_proto));
|
|
|
|
fm_st_proto.chnl_id = 0x08;
|
|
|
|
|
|
|
|
ret = st_unregister(&fm_st_proto);
|
|
|
|
|
2011-01-11 17:35:22 +08:00
|
|
|
if (ret < 0)
|
|
|
|
fmerr("Failed to de-register FM from ST %d\n", ret);
|
|
|
|
else
|
|
|
|
fmdbg("Successfully unregistered from ST\n");
|
|
|
|
|
|
|
|
clear_bit(FM_CORE_READY, &fmdev->flag);
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Module init function. Ask FM V4L module to register video device.
|
|
|
|
* Allocate memory for FM driver context and RX RDS buffer.
|
|
|
|
*/
|
|
|
|
static int __init fm_drv_init(void)
|
|
|
|
{
|
|
|
|
struct fmdev *fmdev = NULL;
|
2011-12-02 17:01:11 +08:00
|
|
|
int ret = -ENOMEM;
|
2011-01-11 17:35:22 +08:00
|
|
|
|
|
|
|
fmdbg("FM driver version %s\n", FM_DRV_VERSION);
|
|
|
|
|
|
|
|
fmdev = kzalloc(sizeof(struct fmdev), GFP_KERNEL);
|
|
|
|
if (NULL == fmdev) {
|
|
|
|
fmerr("Can't allocate operation structure memory\n");
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
fmdev->rx.rds.buf_size = default_rds_buf * FM_RDS_BLK_SIZE;
|
|
|
|
fmdev->rx.rds.buff = kzalloc(fmdev->rx.rds.buf_size, GFP_KERNEL);
|
|
|
|
if (NULL == fmdev->rx.rds.buff) {
|
|
|
|
fmerr("Can't allocate rds ring buffer\n");
|
|
|
|
goto rel_dev;
|
|
|
|
}
|
|
|
|
|
|
|
|
ret = fm_v4l2_init_video_device(fmdev, radio_nr);
|
|
|
|
if (ret < 0)
|
|
|
|
goto rel_rdsbuf;
|
|
|
|
|
|
|
|
fmdev->irq_info.handlers = int_handler_table;
|
|
|
|
fmdev->curr_fmmode = FM_MODE_OFF;
|
|
|
|
fmdev->tx_data.pwr_lvl = FM_PWR_LVL_DEF;
|
|
|
|
fmdev->tx_data.preemph = FM_TX_PREEMPH_50US;
|
|
|
|
return ret;
|
|
|
|
|
|
|
|
rel_rdsbuf:
|
|
|
|
kfree(fmdev->rx.rds.buff);
|
|
|
|
rel_dev:
|
|
|
|
kfree(fmdev);
|
|
|
|
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* Module exit function. Ask FM V4L module to unregister video device */
|
|
|
|
static void __exit fm_drv_exit(void)
|
|
|
|
{
|
|
|
|
struct fmdev *fmdev = NULL;
|
|
|
|
|
|
|
|
fmdev = fm_v4l2_deinit_video_device();
|
|
|
|
if (fmdev != NULL) {
|
|
|
|
kfree(fmdev->rx.rds.buff);
|
|
|
|
kfree(fmdev);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
module_init(fm_drv_init);
|
|
|
|
module_exit(fm_drv_exit);
|
|
|
|
|
|
|
|
/* ------------- Module Info ------------- */
|
|
|
|
MODULE_AUTHOR("Manjunatha Halli <manjunatha_halli@ti.com>");
|
|
|
|
MODULE_DESCRIPTION("FM Driver for TI's Connectivity chip. " FM_DRV_VERSION);
|
|
|
|
MODULE_VERSION(FM_DRV_VERSION);
|
|
|
|
MODULE_LICENSE("GPL");
|