OpenCloudOS-Kernel/drivers/tty/serial/sunhv.c

656 lines
13 KiB
C
Raw Normal View History

tty: add SPDX identifiers to all remaining files in drivers/tty/ It's good to have SPDX identifiers in all files to make it easier to audit the kernel tree for correct licenses. Update the drivers/tty files files with the correct SPDX license identifier based on the license text in the file itself. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This work is based on a script and data from Thomas Gleixner, Philippe Ombredanne, and Kate Stewart. Cc: Jiri Slaby <jslaby@suse.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Chris Metcalf <cmetcalf@mellanox.com> Cc: Jiri Kosina <jikos@kernel.org> Cc: David Sterba <dsterba@suse.com> Cc: James Hogan <jhogan@kernel.org> Cc: Rob Herring <robh@kernel.org> Cc: Eric Anholt <eric@anholt.net> Cc: Stefan Wahren <stefan.wahren@i2se.com> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Ray Jui <rjui@broadcom.com> Cc: Scott Branden <sbranden@broadcom.com> Cc: bcm-kernel-feedback-list@broadcom.com Cc: "James E.J. Bottomley" <jejb@parisc-linux.org> Cc: Helge Deller <deller@gmx.de> Cc: Joachim Eastwood <manabian@gmail.com> Cc: Matthias Brugger <matthias.bgg@gmail.com> Cc: Masahiro Yamada <yamada.masahiro@socionext.com> Cc: Tobias Klauser <tklauser@distanz.ch> Cc: Russell King <linux@armlinux.org.uk> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Richard Genoud <richard.genoud@gmail.com> Cc: Alexander Shiyan <shc_work@mail.ru> Cc: Baruch Siach <baruch@tkos.co.il> Cc: "Maciej W. Rozycki" <macro@linux-mips.org> Cc: "Uwe Kleine-König" <kernel@pengutronix.de> Cc: Pat Gefre <pfg@sgi.com> Cc: "Guilherme G. Piccoli" <gpiccoli@linux.vnet.ibm.com> Cc: Jason Wessel <jason.wessel@windriver.com> Cc: Vladimir Zapolskiy <vz@mleia.com> Cc: Sylvain Lemieux <slemieux.tyco@gmail.com> Cc: Carlo Caione <carlo@caione.org> Cc: Kevin Hilman <khilman@baylibre.com> Cc: Liviu Dudau <liviu.dudau@arm.com> Cc: Sudeep Holla <sudeep.holla@arm.com> Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Andy Gross <andy.gross@linaro.org> Cc: David Brown <david.brown@linaro.org> Cc: "Andreas Färber" <afaerber@suse.de> Cc: Kevin Cernekee <cernekee@gmail.com> Cc: Laxman Dewangan <ldewangan@nvidia.com> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Jonathan Hunter <jonathanh@nvidia.com> Cc: Barry Song <baohua@kernel.org> Cc: Patrice Chotard <patrice.chotard@st.com> Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com> Cc: Alexandre Torgue <alexandre.torgue@st.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Peter Korsgaard <jacmet@sunsite.dk> Cc: Timur Tabi <timur@tabi.org> Cc: Tony Prisk <linux@prisktech.co.nz> Cc: Michal Simek <michal.simek@xilinx.com> Cc: "Sören Brinkmann" <soren.brinkmann@xilinx.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Kate Stewart <kstewart@linuxfoundation.org> Cc: Philippe Ombredanne <pombredanne@nexb.com> Cc: Jiri Slaby <jslaby@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-07 01:11:51 +08:00
// SPDX-License-Identifier: GPL-2.0
/* sunhv.c: Serial driver for SUN4V hypervisor console.
*
* Copyright (C) 2006, 2007 David S. Miller (davem@davemloft.net)
*/
#include <linux/kernel.h>
#include <linux/errno.h>
#include <linux/tty.h>
#include <linux/tty_flip.h>
#include <linux/major.h>
#include <linux/circ_buf.h>
#include <linux/serial.h>
#include <linux/sysrq.h>
#include <linux/console.h>
#include <linux/spinlock.h>
#include <linux/slab.h>
#include <linux/delay.h>
#include <linux/init.h>
#include <linux/of_device.h>
#include <asm/hypervisor.h>
#include <asm/spitfire.h>
#include <asm/prom.h>
#include <asm/irq.h>
#include <asm/setup.h>
#if defined(CONFIG_MAGIC_SYSRQ)
#define SUPPORT_SYSRQ
#endif
#include <linux/serial_core.h>
#include <linux/sunserialcore.h>
#define CON_BREAK ((long)-1)
#define CON_HUP ((long)-2)
#define IGNORE_BREAK 0x1
#define IGNORE_ALL 0x2
static char *con_write_page;
static char *con_read_page;
static int hung_up = 0;
static void transmit_chars_putchar(struct uart_port *port, struct circ_buf *xmit)
{
while (!uart_circ_empty(xmit)) {
long status = sun4v_con_putchar(xmit->buf[xmit->tail]);
if (status != HV_EOK)
break;
xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
port->icount.tx++;
}
}
static void transmit_chars_write(struct uart_port *port, struct circ_buf *xmit)
{
while (!uart_circ_empty(xmit)) {
unsigned long ra = __pa(xmit->buf + xmit->tail);
unsigned long len, status, sent;
len = CIRC_CNT_TO_END(xmit->head, xmit->tail,
UART_XMIT_SIZE);
status = sun4v_con_write(ra, len, &sent);
if (status != HV_EOK)
break;
xmit->tail = (xmit->tail + sent) & (UART_XMIT_SIZE - 1);
port->icount.tx += sent;
}
}
static int receive_chars_getchar(struct uart_port *port)
{
int saw_console_brk = 0;
int limit = 10000;
while (limit-- > 0) {
long status;
long c = sun4v_con_getchar(&status);
if (status == HV_EWOULDBLOCK)
break;
if (c == CON_BREAK) {
if (uart_handle_break(port))
continue;
saw_console_brk = 1;
c = 0;
}
if (c == CON_HUP) {
hung_up = 1;
uart_handle_dcd_change(port, 0);
} else if (hung_up) {
hung_up = 0;
uart_handle_dcd_change(port, 1);
}
if (port->state == NULL) {
IRQ: Maintain regs pointer globally rather than passing to IRQ handlers Maintain a per-CPU global "struct pt_regs *" variable which can be used instead of passing regs around manually through all ~1800 interrupt handlers in the Linux kernel. The regs pointer is used in few places, but it potentially costs both stack space and code to pass it around. On the FRV arch, removing the regs parameter from all the genirq function results in a 20% speed up of the IRQ exit path (ie: from leaving timer_interrupt() to leaving do_IRQ()). Where appropriate, an arch may override the generic storage facility and do something different with the variable. On FRV, for instance, the address is maintained in GR28 at all times inside the kernel as part of general exception handling. Having looked over the code, it appears that the parameter may be handed down through up to twenty or so layers of functions. Consider a USB character device attached to a USB hub, attached to a USB controller that posts its interrupts through a cascaded auxiliary interrupt controller. A character device driver may want to pass regs to the sysrq handler through the input layer which adds another few layers of parameter passing. I've build this code with allyesconfig for x86_64 and i386. I've runtested the main part of the code on FRV and i386, though I can't test most of the drivers. I've also done partial conversion for powerpc and MIPS - these at least compile with minimal configurations. This will affect all archs. Mostly the changes should be relatively easy. Take do_IRQ(), store the regs pointer at the beginning, saving the old one: struct pt_regs *old_regs = set_irq_regs(regs); And put the old one back at the end: set_irq_regs(old_regs); Don't pass regs through to generic_handle_irq() or __do_IRQ(). In timer_interrupt(), this sort of change will be necessary: - update_process_times(user_mode(regs)); - profile_tick(CPU_PROFILING, regs); + update_process_times(user_mode(get_irq_regs())); + profile_tick(CPU_PROFILING); I'd like to move update_process_times()'s use of get_irq_regs() into itself, except that i386, alone of the archs, uses something other than user_mode(). Some notes on the interrupt handling in the drivers: (*) input_dev() is now gone entirely. The regs pointer is no longer stored in the input_dev struct. (*) finish_unlinks() in drivers/usb/host/ohci-q.c needs checking. It does something different depending on whether it's been supplied with a regs pointer or not. (*) Various IRQ handler function pointers have been moved to type irq_handler_t. Signed-Off-By: David Howells <dhowells@redhat.com> (cherry picked from 1b16e7ac850969f38b375e511e3fa2f474a33867 commit)
2006-10-05 21:55:46 +08:00
uart_handle_sysrq_char(port, c);
continue;
}
port->icount.rx++;
IRQ: Maintain regs pointer globally rather than passing to IRQ handlers Maintain a per-CPU global "struct pt_regs *" variable which can be used instead of passing regs around manually through all ~1800 interrupt handlers in the Linux kernel. The regs pointer is used in few places, but it potentially costs both stack space and code to pass it around. On the FRV arch, removing the regs parameter from all the genirq function results in a 20% speed up of the IRQ exit path (ie: from leaving timer_interrupt() to leaving do_IRQ()). Where appropriate, an arch may override the generic storage facility and do something different with the variable. On FRV, for instance, the address is maintained in GR28 at all times inside the kernel as part of general exception handling. Having looked over the code, it appears that the parameter may be handed down through up to twenty or so layers of functions. Consider a USB character device attached to a USB hub, attached to a USB controller that posts its interrupts through a cascaded auxiliary interrupt controller. A character device driver may want to pass regs to the sysrq handler through the input layer which adds another few layers of parameter passing. I've build this code with allyesconfig for x86_64 and i386. I've runtested the main part of the code on FRV and i386, though I can't test most of the drivers. I've also done partial conversion for powerpc and MIPS - these at least compile with minimal configurations. This will affect all archs. Mostly the changes should be relatively easy. Take do_IRQ(), store the regs pointer at the beginning, saving the old one: struct pt_regs *old_regs = set_irq_regs(regs); And put the old one back at the end: set_irq_regs(old_regs); Don't pass regs through to generic_handle_irq() or __do_IRQ(). In timer_interrupt(), this sort of change will be necessary: - update_process_times(user_mode(regs)); - profile_tick(CPU_PROFILING, regs); + update_process_times(user_mode(get_irq_regs())); + profile_tick(CPU_PROFILING); I'd like to move update_process_times()'s use of get_irq_regs() into itself, except that i386, alone of the archs, uses something other than user_mode(). Some notes on the interrupt handling in the drivers: (*) input_dev() is now gone entirely. The regs pointer is no longer stored in the input_dev struct. (*) finish_unlinks() in drivers/usb/host/ohci-q.c needs checking. It does something different depending on whether it's been supplied with a regs pointer or not. (*) Various IRQ handler function pointers have been moved to type irq_handler_t. Signed-Off-By: David Howells <dhowells@redhat.com> (cherry picked from 1b16e7ac850969f38b375e511e3fa2f474a33867 commit)
2006-10-05 21:55:46 +08:00
if (uart_handle_sysrq_char(port, c))
continue;
tty_insert_flip_char(&port->state->port, c, TTY_NORMAL);
}
return saw_console_brk;
}
static int receive_chars_read(struct uart_port *port)
{
static int saw_console_brk;
int limit = 10000;
while (limit-- > 0) {
unsigned long ra = __pa(con_read_page);
unsigned long bytes_read, i;
long stat = sun4v_con_read(ra, PAGE_SIZE, &bytes_read);
if (stat != HV_EOK) {
bytes_read = 0;
if (stat == CON_BREAK) {
if (saw_console_brk)
sun_do_break();
if (uart_handle_break(port))
continue;
saw_console_brk = 1;
*con_read_page = 0;
bytes_read = 1;
} else if (stat == CON_HUP) {
hung_up = 1;
uart_handle_dcd_change(port, 0);
continue;
} else {
/* HV_EWOULDBLOCK, etc. */
break;
}
}
if (hung_up) {
hung_up = 0;
uart_handle_dcd_change(port, 1);
}
if (port->sysrq != 0 && *con_read_page) {
for (i = 0; i < bytes_read; i++)
uart_handle_sysrq_char(port, con_read_page[i]);
saw_console_brk = 0;
}
if (port->state == NULL)
continue;
port->icount.rx += bytes_read;
tty_insert_flip_string(&port->state->port, con_read_page,
bytes_read);
}
return saw_console_brk;
}
struct sunhv_ops {
void (*transmit_chars)(struct uart_port *port, struct circ_buf *xmit);
int (*receive_chars)(struct uart_port *port);
};
static const struct sunhv_ops bychar_ops = {
.transmit_chars = transmit_chars_putchar,
.receive_chars = receive_chars_getchar,
};
static const struct sunhv_ops bywrite_ops = {
.transmit_chars = transmit_chars_write,
.receive_chars = receive_chars_read,
};
static const struct sunhv_ops *sunhv_ops = &bychar_ops;
static struct tty_port *receive_chars(struct uart_port *port)
{
struct tty_port *tport = NULL;
if (port->state != NULL) /* Unopened serial console */
tport = &port->state->port;
if (sunhv_ops->receive_chars(port))
sun_do_break();
return tport;
}
static void transmit_chars(struct uart_port *port)
{
struct circ_buf *xmit;
if (!port->state)
return;
xmit = &port->state->xmit;
if (uart_circ_empty(xmit) || uart_tx_stopped(port))
return;
sunhv_ops->transmit_chars(port, xmit);
if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
uart_write_wakeup(port);
}
IRQ: Maintain regs pointer globally rather than passing to IRQ handlers Maintain a per-CPU global "struct pt_regs *" variable which can be used instead of passing regs around manually through all ~1800 interrupt handlers in the Linux kernel. The regs pointer is used in few places, but it potentially costs both stack space and code to pass it around. On the FRV arch, removing the regs parameter from all the genirq function results in a 20% speed up of the IRQ exit path (ie: from leaving timer_interrupt() to leaving do_IRQ()). Where appropriate, an arch may override the generic storage facility and do something different with the variable. On FRV, for instance, the address is maintained in GR28 at all times inside the kernel as part of general exception handling. Having looked over the code, it appears that the parameter may be handed down through up to twenty or so layers of functions. Consider a USB character device attached to a USB hub, attached to a USB controller that posts its interrupts through a cascaded auxiliary interrupt controller. A character device driver may want to pass regs to the sysrq handler through the input layer which adds another few layers of parameter passing. I've build this code with allyesconfig for x86_64 and i386. I've runtested the main part of the code on FRV and i386, though I can't test most of the drivers. I've also done partial conversion for powerpc and MIPS - these at least compile with minimal configurations. This will affect all archs. Mostly the changes should be relatively easy. Take do_IRQ(), store the regs pointer at the beginning, saving the old one: struct pt_regs *old_regs = set_irq_regs(regs); And put the old one back at the end: set_irq_regs(old_regs); Don't pass regs through to generic_handle_irq() or __do_IRQ(). In timer_interrupt(), this sort of change will be necessary: - update_process_times(user_mode(regs)); - profile_tick(CPU_PROFILING, regs); + update_process_times(user_mode(get_irq_regs())); + profile_tick(CPU_PROFILING); I'd like to move update_process_times()'s use of get_irq_regs() into itself, except that i386, alone of the archs, uses something other than user_mode(). Some notes on the interrupt handling in the drivers: (*) input_dev() is now gone entirely. The regs pointer is no longer stored in the input_dev struct. (*) finish_unlinks() in drivers/usb/host/ohci-q.c needs checking. It does something different depending on whether it's been supplied with a regs pointer or not. (*) Various IRQ handler function pointers have been moved to type irq_handler_t. Signed-Off-By: David Howells <dhowells@redhat.com> (cherry picked from 1b16e7ac850969f38b375e511e3fa2f474a33867 commit)
2006-10-05 21:55:46 +08:00
static irqreturn_t sunhv_interrupt(int irq, void *dev_id)
{
struct uart_port *port = dev_id;
struct tty_port *tport;
unsigned long flags;
spin_lock_irqsave(&port->lock, flags);
tport = receive_chars(port);
transmit_chars(port);
spin_unlock_irqrestore(&port->lock, flags);
if (tport)
tty_flip_buffer_push(tport);
return IRQ_HANDLED;
}
/* port->lock is not held. */
static unsigned int sunhv_tx_empty(struct uart_port *port)
{
/* Transmitter is always empty for us. If the circ buffer
* is non-empty or there is an x_char pending, our caller
* will do the right thing and ignore what we return here.
*/
return TIOCSER_TEMT;
}
/* port->lock held by caller. */
static void sunhv_set_mctrl(struct uart_port *port, unsigned int mctrl)
{
return;
}
/* port->lock is held by caller and interrupts are disabled. */
static unsigned int sunhv_get_mctrl(struct uart_port *port)
{
return TIOCM_DSR | TIOCM_CAR | TIOCM_CTS;
}
/* port->lock held by caller. */
static void sunhv_stop_tx(struct uart_port *port)
{
return;
}
/* port->lock held by caller. */
static void sunhv_start_tx(struct uart_port *port)
{
transmit_chars(port);
}
/* port->lock is not held. */
static void sunhv_send_xchar(struct uart_port *port, char ch)
{
unsigned long flags;
int limit = 10000;
if (ch == __DISABLED_CHAR)
return;
spin_lock_irqsave(&port->lock, flags);
while (limit-- > 0) {
long status = sun4v_con_putchar(ch);
if (status == HV_EOK)
break;
udelay(1);
}
spin_unlock_irqrestore(&port->lock, flags);
}
/* port->lock held by caller. */
static void sunhv_stop_rx(struct uart_port *port)
{
}
/* port->lock is not held. */
static void sunhv_break_ctl(struct uart_port *port, int break_state)
{
if (break_state) {
unsigned long flags;
int limit = 10000;
spin_lock_irqsave(&port->lock, flags);
while (limit-- > 0) {
long status = sun4v_con_putchar(CON_BREAK);
if (status == HV_EOK)
break;
udelay(1);
}
spin_unlock_irqrestore(&port->lock, flags);
}
}
/* port->lock is not held. */
static int sunhv_startup(struct uart_port *port)
{
return 0;
}
/* port->lock is not held. */
static void sunhv_shutdown(struct uart_port *port)
{
}
/* port->lock is not held. */
static void sunhv_set_termios(struct uart_port *port, struct ktermios *termios,
struct ktermios *old)
{
unsigned int baud = uart_get_baud_rate(port, termios, old, 0, 4000000);
unsigned int quot = uart_get_divisor(port, baud);
unsigned int iflag, cflag;
unsigned long flags;
spin_lock_irqsave(&port->lock, flags);
iflag = termios->c_iflag;
cflag = termios->c_cflag;
port->ignore_status_mask = 0;
if (iflag & IGNBRK)
port->ignore_status_mask |= IGNORE_BREAK;
if ((cflag & CREAD) == 0)
port->ignore_status_mask |= IGNORE_ALL;
/* XXX */
uart_update_timeout(port, cflag,
(port->uartclk / (16 * quot)));
spin_unlock_irqrestore(&port->lock, flags);
}
static const char *sunhv_type(struct uart_port *port)
{
return "SUN4V HCONS";
}
static void sunhv_release_port(struct uart_port *port)
{
}
static int sunhv_request_port(struct uart_port *port)
{
return 0;
}
static void sunhv_config_port(struct uart_port *port, int flags)
{
}
static int sunhv_verify_port(struct uart_port *port, struct serial_struct *ser)
{
return -EINVAL;
}
tty: serial: constify uart_ops structures Declare uart_ops structures as const as they are only stored in the ops field of an uart_port structure. This field is of type const, so uart_ops structures having this property can be made const too. File size details before and after patching. First line of every .o file shows the file size before patching and second line shows the size after patching. text data bss dec hex filename 2977 456 64 3497 da9 drivers/tty/serial/amba-pl010.o 3169 272 64 3505 db1 drivers/tty/serial/amba-pl010.o 3109 456 0 3565 ded drivers/tty/serial/efm32-uart.o 3301 272 0 3573 df5 drivers/tty/serial/efm32-uart.o 10668 753 1 11422 2c9e drivers/tty/serial/icom.o 10860 561 1 11422 2c9e drivers/tty/serial/icom.o 23904 408 8 24320 5f00 drivers/tty/serial/ioc3_serial.o 24088 224 8 24320 5f00 drivers/tty/serial/ioc3_serial.o 10516 560 4 11080 2b48 drivers/tty/serial/ioc4_serial.o 10709 368 4 11081 2b49 drivers/tty/serial/ioc4_serial.o 7853 648 1216 9717 25f5 drivers/tty/serial/mpsc.o 8037 456 1216 9709 25ed drivers/tty/serial/mpsc.o 10248 456 0 10704 29d0 drivers/tty/serial/omap-serial.o 10440 272 0 10712 29d8 drivers/tty/serial/omap-serial.o 8122 532 1984 10638 298e drivers/tty/serial/pmac_zilog.o 8306 340 1984 10630 2986 drivers/tty/serial/pmac_zilog.o 3808 456 0 4264 10a8 drivers/tty/serial/pxa.o 4000 264 0 4264 10a8 drivers/tty/serial/pxa.o 21781 3864 0 25645 642d drivers/tty/serial/serial-tegra.o 22037 3608 0 25645 642d drivers/tty/serial/serial-tegra.o 2481 456 96 3033 bd9 drivers/tty/serial/sprd_serial.o 2673 272 96 3041 be1 drivers/tty/serial/sprd_serial.o 5534 300 512 6346 18ca drivers/tty/serial/vr41xx_siu.o 5630 204 512 6346 18ca drivers/tty/serial/vr41xx_siu.o 6730 1576 128 8434 20f2 drivers/tty/serial/vt8500_serial.o 6986 1320 128 8434 20f2 drivers/tty/serial/vt8500_serial.o Cross compiled for mips architecture. 3005 488 0 3493 da5 drivers/tty/serial/pnx8xxx_uart.o 3189 304 0 3493 da5 drivers/tty/serial/pnx8xxx_uart.o 4272 196 1056 5524 1594 drivers/tty/serial/dz.o 4368 100 1056 5524 1594 drivers/tty/serial/dz.o 6551 144 16 6711 1a37 drivers/tty/serial/ip22zilog.o 6647 48 16 6711 1a37 drivers/tty/serial/ip22zilog.o 9612 428 1520 11560 2d28 drivers/tty/serial/serial_txx9.o 9708 332 1520 11560 2d28 drivers/tty/serial/serial_txx9.o 4156 296 16 4468 1174 drivers/tty/serial/ar933x_uart.o 4252 200 16 4468 1174 drivers/tty/serial/ar933x_uart.o Cross compiled for arm archiecture. 11716 1780 44 13540 34e4 drivers/tty/serial/sirfsoc_uart.o 11808 1688 44 13540 34e4 drivers/tty/serial/sirfsoc_uart.o 13352 596 56 14004 36b4 drivers/tty/serial/amba-pl011.o 13444 504 56 14004 36b4 drivers/tty/serial/amba-pl011.o Cross compiled for sparc architecture. 4664 528 32 5224 1468 drivers/tty/serial/sunhv.o 4848 344 32 5224 1468 drivers/tty/serial/sunhv.o 8080 332 28 8440 20f8 drivers/tty/serial/sunzilog.o 8184 228 28 8440 20f8 drivers/tty/serial/sunzilog.o Cross compiled for ia64 architecture. 10226 549 472 11247 2bef drivers/tty/serial/sn_console.o 10414 365 472 11251 2bf3 drivers/tty/serial/sn_console.o The files drivers/tty/serial/zs.o, drivers/tty/serial/lpc32xx_hs.o and drivers/tty/serial/lantiq.o did not compile. Signed-off-by: Bhumika Goyal <bhumirks@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-01-26 01:48:52 +08:00
static const struct uart_ops sunhv_pops = {
.tx_empty = sunhv_tx_empty,
.set_mctrl = sunhv_set_mctrl,
.get_mctrl = sunhv_get_mctrl,
.stop_tx = sunhv_stop_tx,
.start_tx = sunhv_start_tx,
.send_xchar = sunhv_send_xchar,
.stop_rx = sunhv_stop_rx,
.break_ctl = sunhv_break_ctl,
.startup = sunhv_startup,
.shutdown = sunhv_shutdown,
.set_termios = sunhv_set_termios,
.type = sunhv_type,
.release_port = sunhv_release_port,
.request_port = sunhv_request_port,
.config_port = sunhv_config_port,
.verify_port = sunhv_verify_port,
};
static struct uart_driver sunhv_reg = {
.owner = THIS_MODULE,
.driver_name = "sunhv",
.dev_name = "ttyS",
.major = TTY_MAJOR,
};
static struct uart_port *sunhv_port;
void sunhv_migrate_hvcons_irq(int cpu)
{
/* Migrate hvcons irq to param cpu */
irq_force_affinity(sunhv_port->irq, cpumask_of(cpu));
}
/* Copy 's' into the con_write_page, decoding "\n" into
* "\r\n" along the way. We have to return two lengths
* because the caller needs to know how much to advance
* 's' and also how many bytes to output via con_write_page.
*/
static int fill_con_write_page(const char *s, unsigned int n,
unsigned long *page_bytes)
{
const char *orig_s = s;
char *p = con_write_page;
int left = PAGE_SIZE;
while (n--) {
if (*s == '\n') {
if (left < 2)
break;
*p++ = '\r';
left--;
} else if (left < 1)
break;
*p++ = *s++;
left--;
}
*page_bytes = p - con_write_page;
return s - orig_s;
}
static void sunhv_console_write_paged(struct console *con, const char *s, unsigned n)
{
struct uart_port *port = sunhv_port;
unsigned long flags;
int locked = 1;
if (port->sysrq || oops_in_progress)
locked = spin_trylock_irqsave(&port->lock, flags);
else
spin_lock_irqsave(&port->lock, flags);
while (n > 0) {
unsigned long ra = __pa(con_write_page);
unsigned long page_bytes;
unsigned int cpy = fill_con_write_page(s, n,
&page_bytes);
n -= cpy;
s += cpy;
while (page_bytes > 0) {
unsigned long written;
int limit = 1000000;
while (limit--) {
unsigned long stat;
stat = sun4v_con_write(ra, page_bytes,
&written);
if (stat == HV_EOK)
break;
udelay(1);
}
if (limit < 0)
break;
page_bytes -= written;
ra += written;
}
}
if (locked)
spin_unlock_irqrestore(&port->lock, flags);
}
static inline void sunhv_console_putchar(struct uart_port *port, char c)
{
int limit = 1000000;
while (limit-- > 0) {
long status = sun4v_con_putchar(c);
if (status == HV_EOK)
break;
udelay(1);
}
}
static void sunhv_console_write_bychar(struct console *con, const char *s, unsigned n)
{
struct uart_port *port = sunhv_port;
unsigned long flags;
int i, locked = 1;
if (port->sysrq || oops_in_progress)
locked = spin_trylock_irqsave(&port->lock, flags);
else
spin_lock_irqsave(&port->lock, flags);
for (i = 0; i < n; i++) {
if (*s == '\n')
sunhv_console_putchar(port, '\r');
sunhv_console_putchar(port, *s++);
}
if (locked)
spin_unlock_irqrestore(&port->lock, flags);
}
static struct console sunhv_console = {
.name = "ttyHV",
.write = sunhv_console_write_bychar,
.device = uart_console_device,
.flags = CON_PRINTBUFFER,
.index = -1,
.data = &sunhv_reg,
};
static int hv_probe(struct platform_device *op)
{
struct uart_port *port;
unsigned long minor;
int err;
if (op->archdata.irqs[0] == 0xffffffff)
return -ENODEV;
port = kzalloc(sizeof(struct uart_port), GFP_KERNEL);
if (unlikely(!port))
return -ENOMEM;
minor = 1;
if (sun4v_hvapi_register(HV_GRP_CORE, 1, &minor) == 0 &&
minor >= 1) {
err = -ENOMEM;
con_write_page = kzalloc(PAGE_SIZE, GFP_KERNEL);
if (!con_write_page)
goto out_free_port;
con_read_page = kzalloc(PAGE_SIZE, GFP_KERNEL);
if (!con_read_page)
goto out_free_con_write_page;
sunhv_console.write = sunhv_console_write_paged;
sunhv_ops = &bywrite_ops;
}
sunhv_port = port;
port->line = 0;
port->ops = &sunhv_pops;
port->type = PORT_SUNHV;
port->uartclk = ( 29491200 / 16 ); /* arbitrary */
port->membase = (unsigned char __iomem *) __pa(port);
port->irq = op->archdata.irqs[0];
port->dev = &op->dev;
[SERIAL] sparc: Infrastructure to fix section mismatch bugs. This patch against 2.6.23 sparc-2.6.git contains a number of minor cleanups of the sparc serial drivers. Initially I fixed this build warning: WARNING: vmlinux.o(.text+0x107a2c): Section mismatch: reference to .init.text:add_preferred_console (between 'sunserial_console_match' and 'sunserial_console_termios') which is done by declaring sunserial_console_match() as __init. This resulted in build warnings on sunserial_current_minor. To resolve these the variable was changed so it is no longer global, and to hide operations on it inside 2 new functions. These functions handle the UART minor handling code that is common to all sparc serial drivers. These changes allowed to clean up the uart counters in all the sparc serial drivers, and the administration of minor device numbers. Lastly, sunserial_console_termios() does not need to be exported since it is only called from non-modular code. Sadly, the following build warning still exists: WARNING: vmlinux.o(__ksymtab+0x2910): Section mismatch: reference to .init.text:sunserial_console_match (between '__ksymtab_sunserial_console_match' and '__ksymtab_sunserial_unregister_minors') This could be resolved by not exporting sunserial_console_match(), but this is not possible at the moment because it is being called from modular code. On the other hand, this is a bogus warning since it comes from a ksymtab section. Signed-off-by: Martin Habets <errandir_news@mph.eclipse.co.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-12-11 19:37:04 +08:00
err = sunserial_register_minors(&sunhv_reg, 1);
if (err)
goto out_free_con_read_page;
sunserial_console_match(&sunhv_console, op->dev.of_node,
&sunhv_reg, port->line, false);
err = uart_add_one_port(&sunhv_reg, port);
if (err)
goto out_unregister_driver;
err = request_irq(port->irq, sunhv_interrupt, 0, "hvcons", port);
if (err)
goto out_remove_port;
platform_set_drvdata(op, port);
return 0;
out_remove_port:
uart_remove_one_port(&sunhv_reg, port);
out_unregister_driver:
[SERIAL] sparc: Infrastructure to fix section mismatch bugs. This patch against 2.6.23 sparc-2.6.git contains a number of minor cleanups of the sparc serial drivers. Initially I fixed this build warning: WARNING: vmlinux.o(.text+0x107a2c): Section mismatch: reference to .init.text:add_preferred_console (between 'sunserial_console_match' and 'sunserial_console_termios') which is done by declaring sunserial_console_match() as __init. This resulted in build warnings on sunserial_current_minor. To resolve these the variable was changed so it is no longer global, and to hide operations on it inside 2 new functions. These functions handle the UART minor handling code that is common to all sparc serial drivers. These changes allowed to clean up the uart counters in all the sparc serial drivers, and the administration of minor device numbers. Lastly, sunserial_console_termios() does not need to be exported since it is only called from non-modular code. Sadly, the following build warning still exists: WARNING: vmlinux.o(__ksymtab+0x2910): Section mismatch: reference to .init.text:sunserial_console_match (between '__ksymtab_sunserial_console_match' and '__ksymtab_sunserial_unregister_minors') This could be resolved by not exporting sunserial_console_match(), but this is not possible at the moment because it is being called from modular code. On the other hand, this is a bogus warning since it comes from a ksymtab section. Signed-off-by: Martin Habets <errandir_news@mph.eclipse.co.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-12-11 19:37:04 +08:00
sunserial_unregister_minors(&sunhv_reg, 1);
out_free_con_read_page:
kfree(con_read_page);
out_free_con_write_page:
kfree(con_write_page);
out_free_port:
kfree(port);
sunhv_port = NULL;
return err;
}
static int hv_remove(struct platform_device *dev)
{
struct uart_port *port = platform_get_drvdata(dev);
free_irq(port->irq, port);
uart_remove_one_port(&sunhv_reg, port);
[SERIAL] sparc: Infrastructure to fix section mismatch bugs. This patch against 2.6.23 sparc-2.6.git contains a number of minor cleanups of the sparc serial drivers. Initially I fixed this build warning: WARNING: vmlinux.o(.text+0x107a2c): Section mismatch: reference to .init.text:add_preferred_console (between 'sunserial_console_match' and 'sunserial_console_termios') which is done by declaring sunserial_console_match() as __init. This resulted in build warnings on sunserial_current_minor. To resolve these the variable was changed so it is no longer global, and to hide operations on it inside 2 new functions. These functions handle the UART minor handling code that is common to all sparc serial drivers. These changes allowed to clean up the uart counters in all the sparc serial drivers, and the administration of minor device numbers. Lastly, sunserial_console_termios() does not need to be exported since it is only called from non-modular code. Sadly, the following build warning still exists: WARNING: vmlinux.o(__ksymtab+0x2910): Section mismatch: reference to .init.text:sunserial_console_match (between '__ksymtab_sunserial_console_match' and '__ksymtab_sunserial_unregister_minors') This could be resolved by not exporting sunserial_console_match(), but this is not possible at the moment because it is being called from modular code. On the other hand, this is a bogus warning since it comes from a ksymtab section. Signed-off-by: Martin Habets <errandir_news@mph.eclipse.co.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-12-11 19:37:04 +08:00
sunserial_unregister_minors(&sunhv_reg, 1);
kfree(con_read_page);
kfree(con_write_page);
kfree(port);
sunhv_port = NULL;
return 0;
}
static const struct of_device_id hv_match[] = {
{
.name = "console",
.compatible = "qcn",
},
{
.name = "console",
.compatible = "SUNW,sun4v-console",
},
{},
};
static struct platform_driver hv_driver = {
.driver = {
.name = "hv",
.of_match_table = hv_match,
},
.probe = hv_probe,
.remove = hv_remove,
};
static int __init sunhv_init(void)
{
if (tlb_type != hypervisor)
return -ENODEV;
return platform_driver_register(&hv_driver);
}
device_initcall(sunhv_init);
#if 0 /* ...def MODULE ; never supported as such */
MODULE_AUTHOR("David S. Miller");
MODULE_DESCRIPTION("SUN4V Hypervisor console driver");
MODULE_VERSION("2.0");
MODULE_LICENSE("GPL");
#endif