bonding: add infrastructure for an option API
This patch adds the necessary basic infrastructure to support
centralized and unified option manipulation API for the bonding. The new
structure bond_option will be used to describe each option with its
dependencies on modes which will be checked automatically thus removing a
lot of duplicated code. Also automatic range checking is added for
some options. Currently the option setting function requires RTNL to
be acquired prior to calling it, since many options already rely on RTNL
it seemed like the best choice to protect all against common race
conditions.
In order to add an option the following steps need to be done:
1. Add an entry BOND_OPT_<option> to bond_options.h so it gets a unique id
and a bit corresponding to the id
2. Add a bond_option entry to the bond_opts[] array in bond_options.c which
describes the option, its dependencies and its manipulation function
3. Add code to export the option through sysfs and/or as a module parameter
(the sysfs export will be made automatically in the future)
The options can have different flags set, currently the following are
supported:
BOND_OPTFLAG_NOSLAVES - require that the bond device has no slaves prior
to setting the option
BOND_OPTFLAG_IFDOWN - require that the bond device is down prior to
setting the option
BOND_OPTFLAG_RAWVAL - don't parse the value but return it raw for the
option to parse
There's a new value structure to describe different types of values
which can have the following flags:
BOND_VALFLAG_DEFAULT - marks the default option (permanent string alias
to this option is "default")
BOND_VALFLAG_MIN - the minimum value that this option can have
BOND_VALFLAG_MAX - the maximum value that this option can have
An example would be nice here, so if we have an option which can have
the values "off"(2), "special"(4, default) and supports a range, say
16 - 32, it should be defined as follows:
"off", 2,
"special", 4, BOND_VALFLAG_DEFAULT,
"rangemin", 16, BOND_VALFLAG_MIN,
"rangemax", 32, BOND_VALFLAG_MAX
So we have the valid intervals: [2, 2], [4, 4], [16, 32]
Also the valid strings: "off" = 2, "special" and "default" = 4
"rangemin" = 16, "rangemax" = 32
BOND_VALFLAG_(MIN|MAX) can be used to specify a valid range for an
option, if MIN is omitted then 0 is considered as a minimum. If an
exact match is found in the values[] table it will be returned,
otherwise the range is tried (if available).
The option parameter passing is done by using a special structure called
bond_opt_value which can take either a string or a value to parse. One
of the bond_opt_init(val|str) macros should be used depending on which
one does the user want to parse (string or value). Then a call to
__bond_opt_set should be done under RTNL.
Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-22 21:53:16 +08:00
|
|
|
/*
|
|
|
|
* drivers/net/bond/bond_options.h - bonding options
|
|
|
|
* Copyright (c) 2013 Nikolay Aleksandrov <nikolay@redhat.com>
|
|
|
|
*
|
|
|
|
* This program is free software; you can redistribute it and/or modify
|
|
|
|
* it under the terms of the GNU General Public License as published by
|
|
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
|
|
* (at your option) any later version.
|
|
|
|
*/
|
|
|
|
|
|
|
|
#ifndef _BOND_OPTIONS_H
|
|
|
|
#define _BOND_OPTIONS_H
|
|
|
|
|
|
|
|
#define BOND_OPT_MAX_NAMELEN 32
|
|
|
|
#define BOND_OPT_VALID(opt) ((opt) < BOND_OPT_LAST)
|
|
|
|
#define BOND_MODE_ALL_EX(x) (~(x))
|
|
|
|
|
|
|
|
/* Option flags:
|
|
|
|
* BOND_OPTFLAG_NOSLAVES - check if the bond device is empty before setting
|
|
|
|
* BOND_OPTFLAG_IFDOWN - check if the bond device is down before setting
|
|
|
|
* BOND_OPTFLAG_RAWVAL - the option parses the value itself
|
|
|
|
*/
|
|
|
|
enum {
|
|
|
|
BOND_OPTFLAG_NOSLAVES = BIT(0),
|
|
|
|
BOND_OPTFLAG_IFDOWN = BIT(1),
|
|
|
|
BOND_OPTFLAG_RAWVAL = BIT(2)
|
|
|
|
};
|
|
|
|
|
|
|
|
/* Value type flags:
|
|
|
|
* BOND_VALFLAG_DEFAULT - mark the value as default
|
|
|
|
* BOND_VALFLAG_(MIN|MAX) - mark the value as min/max
|
|
|
|
*/
|
|
|
|
enum {
|
|
|
|
BOND_VALFLAG_DEFAULT = BIT(0),
|
|
|
|
BOND_VALFLAG_MIN = BIT(1),
|
|
|
|
BOND_VALFLAG_MAX = BIT(2)
|
|
|
|
};
|
|
|
|
|
|
|
|
/* Option IDs, their bit positions correspond to their IDs */
|
|
|
|
enum {
|
2014-01-22 21:53:17 +08:00
|
|
|
BOND_OPT_MODE,
|
2014-01-22 21:53:18 +08:00
|
|
|
BOND_OPT_PACKETS_PER_SLAVE,
|
2014-01-22 21:53:19 +08:00
|
|
|
BOND_OPT_XMIT_HASH,
|
2014-01-22 21:53:20 +08:00
|
|
|
BOND_OPT_ARP_VALIDATE,
|
2014-01-22 21:53:21 +08:00
|
|
|
BOND_OPT_ARP_ALL_TARGETS,
|
2014-01-22 21:53:22 +08:00
|
|
|
BOND_OPT_FAIL_OVER_MAC,
|
2014-01-22 21:53:23 +08:00
|
|
|
BOND_OPT_ARP_INTERVAL,
|
2014-01-22 21:53:24 +08:00
|
|
|
BOND_OPT_ARP_TARGETS,
|
2014-01-22 21:53:25 +08:00
|
|
|
BOND_OPT_DOWNDELAY,
|
2014-01-22 21:53:26 +08:00
|
|
|
BOND_OPT_UPDELAY,
|
2014-01-22 21:53:27 +08:00
|
|
|
BOND_OPT_LACP_RATE,
|
2014-01-22 21:53:28 +08:00
|
|
|
BOND_OPT_MINLINKS,
|
2014-01-22 21:53:29 +08:00
|
|
|
BOND_OPT_AD_SELECT,
|
2014-01-22 21:53:30 +08:00
|
|
|
BOND_OPT_NUM_PEER_NOTIF,
|
2014-01-22 21:53:31 +08:00
|
|
|
BOND_OPT_MIIMON,
|
2014-01-22 21:53:32 +08:00
|
|
|
BOND_OPT_PRIMARY,
|
2014-01-22 21:53:33 +08:00
|
|
|
BOND_OPT_PRIMARY_RESELECT,
|
2014-01-22 21:53:34 +08:00
|
|
|
BOND_OPT_USE_CARRIER,
|
2014-01-22 21:53:35 +08:00
|
|
|
BOND_OPT_ACTIVE_SLAVE,
|
bonding: add infrastructure for an option API
This patch adds the necessary basic infrastructure to support
centralized and unified option manipulation API for the bonding. The new
structure bond_option will be used to describe each option with its
dependencies on modes which will be checked automatically thus removing a
lot of duplicated code. Also automatic range checking is added for
some options. Currently the option setting function requires RTNL to
be acquired prior to calling it, since many options already rely on RTNL
it seemed like the best choice to protect all against common race
conditions.
In order to add an option the following steps need to be done:
1. Add an entry BOND_OPT_<option> to bond_options.h so it gets a unique id
and a bit corresponding to the id
2. Add a bond_option entry to the bond_opts[] array in bond_options.c which
describes the option, its dependencies and its manipulation function
3. Add code to export the option through sysfs and/or as a module parameter
(the sysfs export will be made automatically in the future)
The options can have different flags set, currently the following are
supported:
BOND_OPTFLAG_NOSLAVES - require that the bond device has no slaves prior
to setting the option
BOND_OPTFLAG_IFDOWN - require that the bond device is down prior to
setting the option
BOND_OPTFLAG_RAWVAL - don't parse the value but return it raw for the
option to parse
There's a new value structure to describe different types of values
which can have the following flags:
BOND_VALFLAG_DEFAULT - marks the default option (permanent string alias
to this option is "default")
BOND_VALFLAG_MIN - the minimum value that this option can have
BOND_VALFLAG_MAX - the maximum value that this option can have
An example would be nice here, so if we have an option which can have
the values "off"(2), "special"(4, default) and supports a range, say
16 - 32, it should be defined as follows:
"off", 2,
"special", 4, BOND_VALFLAG_DEFAULT,
"rangemin", 16, BOND_VALFLAG_MIN,
"rangemax", 32, BOND_VALFLAG_MAX
So we have the valid intervals: [2, 2], [4, 4], [16, 32]
Also the valid strings: "off" = 2, "special" and "default" = 4
"rangemin" = 16, "rangemax" = 32
BOND_VALFLAG_(MIN|MAX) can be used to specify a valid range for an
option, if MIN is omitted then 0 is considered as a minimum. If an
exact match is found in the values[] table it will be returned,
otherwise the range is tried (if available).
The option parameter passing is done by using a special structure called
bond_opt_value which can take either a string or a value to parse. One
of the bond_opt_init(val|str) macros should be used depending on which
one does the user want to parse (string or value). Then a call to
__bond_opt_set should be done under RTNL.
Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-22 21:53:16 +08:00
|
|
|
BOND_OPT_LAST
|
|
|
|
};
|
|
|
|
|
|
|
|
/* This structure is used for storing option values and for passing option
|
|
|
|
* values when changing an option. The logic when used as an arg is as follows:
|
|
|
|
* - if string != NULL -> parse it, if the opt is RAW type then return it, else
|
|
|
|
* return the parse result
|
|
|
|
* - if string == NULL -> parse value
|
|
|
|
*/
|
|
|
|
struct bond_opt_value {
|
|
|
|
char *string;
|
|
|
|
u64 value;
|
|
|
|
u32 flags;
|
|
|
|
};
|
|
|
|
|
|
|
|
struct bonding;
|
|
|
|
|
|
|
|
struct bond_option {
|
|
|
|
int id;
|
|
|
|
char *name;
|
|
|
|
char *desc;
|
|
|
|
u32 flags;
|
|
|
|
|
|
|
|
/* unsuppmodes is used to denote modes in which the option isn't
|
|
|
|
* supported.
|
|
|
|
*/
|
|
|
|
unsigned long unsuppmodes;
|
|
|
|
/* supported values which this option can have, can be a subset of
|
|
|
|
* BOND_OPTVAL_RANGE's value range
|
|
|
|
*/
|
|
|
|
struct bond_opt_value *values;
|
|
|
|
|
|
|
|
int (*set)(struct bonding *bond, struct bond_opt_value *val);
|
|
|
|
};
|
|
|
|
|
|
|
|
int __bond_opt_set(struct bonding *bond, unsigned int option,
|
|
|
|
struct bond_opt_value *val);
|
|
|
|
int bond_opt_tryset_rtnl(struct bonding *bond, unsigned int option, char *buf);
|
|
|
|
struct bond_opt_value *bond_opt_parse(const struct bond_option *opt,
|
|
|
|
struct bond_opt_value *val);
|
|
|
|
struct bond_option *bond_opt_get(unsigned int option);
|
|
|
|
struct bond_opt_value *bond_opt_get_val(unsigned int option, u64 val);
|
|
|
|
|
|
|
|
/* This helper is used to initialize a bond_opt_value structure for parameter
|
|
|
|
* passing. There should be either a valid string or value, but not both.
|
|
|
|
* When value is ULLONG_MAX then string will be used.
|
|
|
|
*/
|
|
|
|
static inline void __bond_opt_init(struct bond_opt_value *optval,
|
|
|
|
char *string, u64 value)
|
|
|
|
{
|
|
|
|
memset(optval, 0, sizeof(*optval));
|
|
|
|
optval->value = ULLONG_MAX;
|
|
|
|
if (value == ULLONG_MAX)
|
|
|
|
optval->string = string;
|
|
|
|
else
|
|
|
|
optval->value = value;
|
|
|
|
}
|
|
|
|
#define bond_opt_initval(optval, value) __bond_opt_init(optval, NULL, value)
|
|
|
|
#define bond_opt_initstr(optval, str) __bond_opt_init(optval, str, ULLONG_MAX)
|
2014-01-22 21:53:17 +08:00
|
|
|
|
|
|
|
int bond_option_mode_set(struct bonding *bond, struct bond_opt_value *newval);
|
2014-01-22 21:53:18 +08:00
|
|
|
int bond_option_pps_set(struct bonding *bond, struct bond_opt_value *newval);
|
2014-01-22 21:53:19 +08:00
|
|
|
int bond_option_xmit_hash_policy_set(struct bonding *bond,
|
|
|
|
struct bond_opt_value *newval);
|
2014-01-22 21:53:20 +08:00
|
|
|
int bond_option_arp_validate_set(struct bonding *bond,
|
|
|
|
struct bond_opt_value *newval);
|
2014-01-22 21:53:21 +08:00
|
|
|
int bond_option_arp_all_targets_set(struct bonding *bond,
|
|
|
|
struct bond_opt_value *newval);
|
2014-01-22 21:53:22 +08:00
|
|
|
int bond_option_fail_over_mac_set(struct bonding *bond,
|
|
|
|
struct bond_opt_value *newval);
|
2014-01-22 21:53:23 +08:00
|
|
|
int bond_option_arp_interval_set(struct bonding *bond,
|
|
|
|
struct bond_opt_value *newval);
|
2014-01-22 21:53:24 +08:00
|
|
|
int bond_option_arp_ip_targets_set(struct bonding *bond,
|
|
|
|
struct bond_opt_value *newval);
|
|
|
|
void bond_option_arp_ip_targets_clear(struct bonding *bond);
|
2014-01-22 21:53:25 +08:00
|
|
|
int bond_option_downdelay_set(struct bonding *bond,
|
|
|
|
struct bond_opt_value *newval);
|
2014-01-22 21:53:26 +08:00
|
|
|
int bond_option_updelay_set(struct bonding *bond,
|
|
|
|
struct bond_opt_value *newval);
|
2014-01-22 21:53:27 +08:00
|
|
|
int bond_option_lacp_rate_set(struct bonding *bond,
|
|
|
|
struct bond_opt_value *newval);
|
2014-01-22 21:53:28 +08:00
|
|
|
int bond_option_min_links_set(struct bonding *bond,
|
|
|
|
struct bond_opt_value *newval);
|
2014-01-22 21:53:29 +08:00
|
|
|
int bond_option_ad_select_set(struct bonding *bond,
|
|
|
|
struct bond_opt_value *newval);
|
2014-01-22 21:53:30 +08:00
|
|
|
int bond_option_num_peer_notif_set(struct bonding *bond,
|
|
|
|
struct bond_opt_value *newval);
|
2014-01-22 21:53:31 +08:00
|
|
|
int bond_option_miimon_set(struct bonding *bond, struct bond_opt_value *newval);
|
2014-01-22 21:53:32 +08:00
|
|
|
int bond_option_primary_set(struct bonding *bond,
|
|
|
|
struct bond_opt_value *newval);
|
2014-01-22 21:53:33 +08:00
|
|
|
int bond_option_primary_reselect_set(struct bonding *bond,
|
|
|
|
struct bond_opt_value *newval);
|
2014-01-22 21:53:34 +08:00
|
|
|
int bond_option_use_carrier_set(struct bonding *bond,
|
|
|
|
struct bond_opt_value *newval);
|
2014-01-22 21:53:35 +08:00
|
|
|
int bond_option_active_slave_set(struct bonding *bond,
|
|
|
|
struct bond_opt_value *newval);
|
bonding: add infrastructure for an option API
This patch adds the necessary basic infrastructure to support
centralized and unified option manipulation API for the bonding. The new
structure bond_option will be used to describe each option with its
dependencies on modes which will be checked automatically thus removing a
lot of duplicated code. Also automatic range checking is added for
some options. Currently the option setting function requires RTNL to
be acquired prior to calling it, since many options already rely on RTNL
it seemed like the best choice to protect all against common race
conditions.
In order to add an option the following steps need to be done:
1. Add an entry BOND_OPT_<option> to bond_options.h so it gets a unique id
and a bit corresponding to the id
2. Add a bond_option entry to the bond_opts[] array in bond_options.c which
describes the option, its dependencies and its manipulation function
3. Add code to export the option through sysfs and/or as a module parameter
(the sysfs export will be made automatically in the future)
The options can have different flags set, currently the following are
supported:
BOND_OPTFLAG_NOSLAVES - require that the bond device has no slaves prior
to setting the option
BOND_OPTFLAG_IFDOWN - require that the bond device is down prior to
setting the option
BOND_OPTFLAG_RAWVAL - don't parse the value but return it raw for the
option to parse
There's a new value structure to describe different types of values
which can have the following flags:
BOND_VALFLAG_DEFAULT - marks the default option (permanent string alias
to this option is "default")
BOND_VALFLAG_MIN - the minimum value that this option can have
BOND_VALFLAG_MAX - the maximum value that this option can have
An example would be nice here, so if we have an option which can have
the values "off"(2), "special"(4, default) and supports a range, say
16 - 32, it should be defined as follows:
"off", 2,
"special", 4, BOND_VALFLAG_DEFAULT,
"rangemin", 16, BOND_VALFLAG_MIN,
"rangemax", 32, BOND_VALFLAG_MAX
So we have the valid intervals: [2, 2], [4, 4], [16, 32]
Also the valid strings: "off" = 2, "special" and "default" = 4
"rangemin" = 16, "rangemax" = 32
BOND_VALFLAG_(MIN|MAX) can be used to specify a valid range for an
option, if MIN is omitted then 0 is considered as a minimum. If an
exact match is found in the values[] table it will be returned,
otherwise the range is tried (if available).
The option parameter passing is done by using a special structure called
bond_opt_value which can take either a string or a value to parse. One
of the bond_opt_init(val|str) macros should be used depending on which
one does the user want to parse (string or value). Then a call to
__bond_opt_set should be done under RTNL.
Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-22 21:53:16 +08:00
|
|
|
#endif /* _BOND_OPTIONS_H */
|