OpenCloudOS-Kernel/drivers/media/radio/wl128x/fmdrv_v4l2.c

614 lines
15 KiB
C
Raw Normal View History

/*
* FM Driver for Connectivity chip of Texas Instruments.
* This file provides interfaces to V4L2 subsystem.
*
* This module registers with V4L2 subsystem as Radio
* data system interface (/dev/radio). During the registration,
* it will expose two set of function pointers.
*
* 1) File operation related API (open, close, read, write, poll...etc).
* 2) Set of V4L2 IOCTL complaint API.
*
* Copyright (C) 2011 Texas Instruments
* Author: Raja Mani <raja_mani@ti.com>
* Author: Manjunatha Halli <manjunatha_halli@ti.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
*/
#include <linux/export.h>
#include "fmdrv.h"
#include "fmdrv_v4l2.h"
#include "fmdrv_common.h"
#include "fmdrv_rx.h"
#include "fmdrv_tx.h"
static struct video_device gradio_dev;
static u8 radio_disconnected;
/* -- V4L2 RADIO (/dev/radioX) device file operation interfaces --- */
/* Read RX RDS data */
static ssize_t fm_v4l2_fops_read(struct file *file, char __user * buf,
size_t count, loff_t *ppos)
{
u8 rds_mode;
int ret;
struct fmdev *fmdev;
fmdev = video_drvdata(file);
if (!radio_disconnected) {
fmerr("FM device is already disconnected\n");
return -EIO;
}
if (mutex_lock_interruptible(&fmdev->mutex))
return -ERESTARTSYS;
/* Turn on RDS mode if it is disabled */
ret = fm_rx_get_rds_mode(fmdev, &rds_mode);
if (ret < 0) {
fmerr("Unable to read current rds mode\n");
goto read_unlock;
}
if (rds_mode == FM_RDS_DISABLE) {
ret = fmc_set_rds_mode(fmdev, FM_RDS_ENABLE);
if (ret < 0) {
fmerr("Failed to enable rds mode\n");
goto read_unlock;
}
}
/* Copy RDS data from internal buffer to user buffer */
ret = fmc_transfer_rds_from_internal_buff(fmdev, file, buf, count);
read_unlock:
mutex_unlock(&fmdev->mutex);
return ret;
}
/* Write TX RDS data */
static ssize_t fm_v4l2_fops_write(struct file *file, const char __user * buf,
size_t count, loff_t *ppos)
{
struct tx_rds rds;
int ret;
struct fmdev *fmdev;
ret = copy_from_user(&rds, buf, sizeof(rds));
rds.text[sizeof(rds.text) - 1] = '\0';
fmdbg("(%d)type: %d, text %s, af %d\n",
ret, rds.text_type, rds.text, rds.af_freq);
if (ret)
return -EFAULT;
fmdev = video_drvdata(file);
if (mutex_lock_interruptible(&fmdev->mutex))
return -ERESTARTSYS;
fm_tx_set_radio_text(fmdev, rds.text, rds.text_type);
fm_tx_set_af(fmdev, rds.af_freq);
mutex_unlock(&fmdev->mutex);
return sizeof(rds);
}
static u32 fm_v4l2_fops_poll(struct file *file, struct poll_table_struct *pts)
{
int ret;
struct fmdev *fmdev;
fmdev = video_drvdata(file);
mutex_lock(&fmdev->mutex);
ret = fmc_is_rds_data_available(fmdev, file, pts);
mutex_unlock(&fmdev->mutex);
if (ret < 0)
return POLLIN | POLLRDNORM;
return 0;
}
/*
* Handle open request for "/dev/radioX" device.
* Start with FM RX mode as default.
*/
static int fm_v4l2_fops_open(struct file *file)
{
int ret;
struct fmdev *fmdev = NULL;
/* Don't allow multiple open */
if (radio_disconnected) {
fmerr("FM device is already opened\n");
return -EBUSY;
}
fmdev = video_drvdata(file);
if (mutex_lock_interruptible(&fmdev->mutex))
return -ERESTARTSYS;
ret = fmc_prepare(fmdev);
if (ret < 0) {
fmerr("Unable to prepare FM CORE\n");
goto open_unlock;
}
fmdbg("Load FM RX firmware..\n");
ret = fmc_set_mode(fmdev, FM_MODE_RX);
if (ret < 0) {
fmerr("Unable to load FM RX firmware\n");
goto open_unlock;
}
radio_disconnected = 1;
open_unlock:
mutex_unlock(&fmdev->mutex);
return ret;
}
static int fm_v4l2_fops_release(struct file *file)
{
int ret;
struct fmdev *fmdev;
fmdev = video_drvdata(file);
if (!radio_disconnected) {
fmdbg("FM device is already closed\n");
return 0;
}
mutex_lock(&fmdev->mutex);
ret = fmc_set_mode(fmdev, FM_MODE_OFF);
if (ret < 0) {
fmerr("Unable to turn off the chip\n");
goto release_unlock;
}
ret = fmc_release(fmdev);
if (ret < 0) {
fmerr("FM CORE release failed\n");
goto release_unlock;
}
radio_disconnected = 0;
release_unlock:
mutex_unlock(&fmdev->mutex);
return ret;
}
/* V4L2 RADIO (/dev/radioX) device IOCTL interfaces */
static int fm_v4l2_vidioc_querycap(struct file *file, void *priv,
struct v4l2_capability *capability)
{
strlcpy(capability->driver, FM_DRV_NAME, sizeof(capability->driver));
strlcpy(capability->card, FM_DRV_CARD_SHORT_NAME,
sizeof(capability->card));
sprintf(capability->bus_info, "UART");
capability->device_caps = V4L2_CAP_HW_FREQ_SEEK | V4L2_CAP_TUNER |
V4L2_CAP_RADIO | V4L2_CAP_MODULATOR |
V4L2_CAP_AUDIO | V4L2_CAP_READWRITE |
V4L2_CAP_RDS_CAPTURE;
capability->capabilities = capability->device_caps |
V4L2_CAP_DEVICE_CAPS;
return 0;
}
static int fm_g_volatile_ctrl(struct v4l2_ctrl *ctrl)
{
struct fmdev *fmdev = container_of(ctrl->handler,
struct fmdev, ctrl_handler);
switch (ctrl->id) {
case V4L2_CID_TUNE_ANTENNA_CAPACITOR:
[media] v4l2-ctrls: fix and improve volatile control handling If you have a cluster of controls that is a mix of volatile and non-volatile controls, then requesting the value of the volatile control would fail if the master control of that cluster was non-volatile. The code assumed that the volatile state of the master control was the same for all other controls in the cluster. This is now fixed. In addition, it was clear from bugs in some drivers that it was confusing that the ctrl->cur union had to be used in g_volatile_ctrl. Several drivers used the 'new' values instead. The framework was changed so that drivers now set the new value instead of the current value. This has an additional benefit as well: the volatile values are now only stored in the 'new' value, leaving the current value alone. This is useful for autofoo/foo control clusters where you want to have a 'foo' control act like a volatile control if 'autofoo' is on, but as a normal control when it is off. Since with this change the cur value is no longer overwritten when g_volatile_ctrl is called, you can use it to remember the original 'foo' value. For example: autofoo = 0, foo = 10 and foo is non-volatile. Now autofoo is set to 1 and foo is marked volatile. Retrieving the foo value will get the volatile value. Set autofoo back to 0, which marks foo as non- volatile again, and retrieving foo will get the old current value of 10. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-06-10 16:43:34 +08:00
ctrl->val = fm_tx_get_tune_cap_val(fmdev);
break;
default:
fmwarn("%s: Unknown IOCTL: %d\n", __func__, ctrl->id);
break;
}
return 0;
}
static int fm_v4l2_s_ctrl(struct v4l2_ctrl *ctrl)
{
struct fmdev *fmdev = container_of(ctrl->handler,
struct fmdev, ctrl_handler);
switch (ctrl->id) {
case V4L2_CID_AUDIO_VOLUME: /* set volume */
return fm_rx_set_volume(fmdev, (u16)ctrl->val);
case V4L2_CID_AUDIO_MUTE: /* set mute */
return fmc_set_mute_mode(fmdev, (u8)ctrl->val);
case V4L2_CID_TUNE_POWER_LEVEL:
/* set TX power level - ext control */
return fm_tx_set_pwr_lvl(fmdev, (u8)ctrl->val);
case V4L2_CID_TUNE_PREEMPHASIS:
return fm_tx_set_preemph_filter(fmdev, (u8) ctrl->val);
default:
return -EINVAL;
}
}
static int fm_v4l2_vidioc_g_audio(struct file *file, void *priv,
struct v4l2_audio *audio)
{
memset(audio, 0, sizeof(*audio));
strcpy(audio->name, "Radio");
audio->capability = V4L2_AUDCAP_STEREO;
return 0;
}
static int fm_v4l2_vidioc_s_audio(struct file *file, void *priv,
const struct v4l2_audio *audio)
{
if (audio->index != 0)
return -EINVAL;
return 0;
}
/* Get tuner attributes. If current mode is NOT RX, return error */
static int fm_v4l2_vidioc_g_tuner(struct file *file, void *priv,
struct v4l2_tuner *tuner)
{
struct fmdev *fmdev = video_drvdata(file);
u32 bottom_freq;
u32 top_freq;
u16 stereo_mono_mode;
u16 rssilvl;
int ret;
if (tuner->index != 0)
return -EINVAL;
if (fmdev->curr_fmmode != FM_MODE_RX)
return -EPERM;
ret = fm_rx_get_band_freq_range(fmdev, &bottom_freq, &top_freq);
if (ret != 0)
return ret;
ret = fm_rx_get_stereo_mono(fmdev, &stereo_mono_mode);
if (ret != 0)
return ret;
ret = fm_rx_get_rssi_level(fmdev, &rssilvl);
if (ret != 0)
return ret;
strcpy(tuner->name, "FM");
tuner->type = V4L2_TUNER_RADIO;
/* Store rangelow and rangehigh freq in unit of 62.5 Hz */
tuner->rangelow = bottom_freq * 16;
tuner->rangehigh = top_freq * 16;
tuner->rxsubchans = V4L2_TUNER_SUB_MONO | V4L2_TUNER_SUB_STEREO |
((fmdev->rx.rds.flag == FM_RDS_ENABLE) ? V4L2_TUNER_SUB_RDS : 0);
tuner->capability = V4L2_TUNER_CAP_STEREO | V4L2_TUNER_CAP_RDS |
V4L2_TUNER_CAP_LOW |
V4L2_TUNER_CAP_HWSEEK_BOUNDED |
V4L2_TUNER_CAP_HWSEEK_WRAP;
tuner->audmode = (stereo_mono_mode ?
V4L2_TUNER_MODE_MONO : V4L2_TUNER_MODE_STEREO);
/*
* Actual rssi value lies in between -128 to +127.
* Convert this range from 0 to 255 by adding +128
*/
rssilvl += 128;
/*
* Return signal strength value should be within 0 to 65535.
* Find out correct signal radio by multiplying (65535/255) = 257
*/
tuner->signal = rssilvl * 257;
tuner->afc = 0;
return ret;
}
/*
* Set tuner attributes. If current mode is NOT RX, set to RX.
* Currently, we set only audio mode (mono/stereo) and RDS state (on/off).
* Should we set other tuner attributes, too?
*/
static int fm_v4l2_vidioc_s_tuner(struct file *file, void *priv,
const struct v4l2_tuner *tuner)
{
struct fmdev *fmdev = video_drvdata(file);
u16 aud_mode;
u8 rds_mode;
int ret;
if (tuner->index != 0)
return -EINVAL;
aud_mode = (tuner->audmode == V4L2_TUNER_MODE_STEREO) ?
FM_STEREO_MODE : FM_MONO_MODE;
rds_mode = (tuner->rxsubchans & V4L2_TUNER_SUB_RDS) ?
FM_RDS_ENABLE : FM_RDS_DISABLE;
if (fmdev->curr_fmmode != FM_MODE_RX) {
ret = fmc_set_mode(fmdev, FM_MODE_RX);
if (ret < 0) {
fmerr("Failed to set RX mode\n");
return ret;
}
}
ret = fmc_set_stereo_mono(fmdev, aud_mode);
if (ret < 0) {
fmerr("Failed to set RX stereo/mono mode\n");
return ret;
}
ret = fmc_set_rds_mode(fmdev, rds_mode);
if (ret < 0)
fmerr("Failed to set RX RDS mode\n");
return ret;
}
/* Get tuner or modulator radio frequency */
static int fm_v4l2_vidioc_g_freq(struct file *file, void *priv,
struct v4l2_frequency *freq)
{
struct fmdev *fmdev = video_drvdata(file);
int ret;
ret = fmc_get_freq(fmdev, &freq->frequency);
if (ret < 0) {
fmerr("Failed to get frequency\n");
return ret;
}
/* Frequency unit of 62.5 Hz*/
freq->frequency = (u32) freq->frequency * 16;
return 0;
}
/* Set tuner or modulator radio frequency */
static int fm_v4l2_vidioc_s_freq(struct file *file, void *priv,
const struct v4l2_frequency *freq)
{
struct fmdev *fmdev = video_drvdata(file);
/*
* As V4L2_TUNER_CAP_LOW is set 1 user sends the frequency
* in units of 62.5 Hz.
*/
return fmc_set_freq(fmdev, freq->frequency / 16);
}
/* Set hardware frequency seek. If current mode is NOT RX, set it RX. */
static int fm_v4l2_vidioc_s_hw_freq_seek(struct file *file, void *priv,
const struct v4l2_hw_freq_seek *seek)
{
struct fmdev *fmdev = video_drvdata(file);
int ret;
if (file->f_flags & O_NONBLOCK)
return -EWOULDBLOCK;
if (fmdev->curr_fmmode != FM_MODE_RX) {
ret = fmc_set_mode(fmdev, FM_MODE_RX);
if (ret != 0) {
fmerr("Failed to set RX mode\n");
return ret;
}
}
ret = fm_rx_seek(fmdev, seek->seek_upward, seek->wrap_around,
seek->spacing);
if (ret < 0)
fmerr("RX seek failed - %d\n", ret);
return ret;
}
/* Get modulator attributes. If mode is not TX, return no attributes. */
static int fm_v4l2_vidioc_g_modulator(struct file *file, void *priv,
struct v4l2_modulator *mod)
{
struct fmdev *fmdev = video_drvdata(file);
if (mod->index != 0)
return -EINVAL;
if (fmdev->curr_fmmode != FM_MODE_TX)
return -EPERM;
mod->txsubchans = ((fmdev->tx_data.aud_mode == FM_STEREO_MODE) ?
V4L2_TUNER_SUB_STEREO : V4L2_TUNER_SUB_MONO) |
((fmdev->tx_data.rds.flag == FM_RDS_ENABLE) ?
V4L2_TUNER_SUB_RDS : 0);
mod->capability = V4L2_TUNER_CAP_STEREO | V4L2_TUNER_CAP_RDS |
V4L2_TUNER_CAP_LOW;
return 0;
}
/* Set modulator attributes. If mode is not TX, set to TX. */
static int fm_v4l2_vidioc_s_modulator(struct file *file, void *priv,
const struct v4l2_modulator *mod)
{
struct fmdev *fmdev = video_drvdata(file);
u8 rds_mode;
u16 aud_mode;
int ret;
if (mod->index != 0)
return -EINVAL;
if (fmdev->curr_fmmode != FM_MODE_TX) {
ret = fmc_set_mode(fmdev, FM_MODE_TX);
if (ret != 0) {
fmerr("Failed to set TX mode\n");
return ret;
}
}
aud_mode = (mod->txsubchans & V4L2_TUNER_SUB_STEREO) ?
FM_STEREO_MODE : FM_MONO_MODE;
rds_mode = (mod->txsubchans & V4L2_TUNER_SUB_RDS) ?
FM_RDS_ENABLE : FM_RDS_DISABLE;
ret = fm_tx_set_stereo_mono(fmdev, aud_mode);
if (ret < 0) {
fmerr("Failed to set mono/stereo mode for TX\n");
return ret;
}
ret = fm_tx_set_rds_mode(fmdev, rds_mode);
if (ret < 0)
fmerr("Failed to set rds mode for TX\n");
return ret;
}
static const struct v4l2_file_operations fm_drv_fops = {
.owner = THIS_MODULE,
.read = fm_v4l2_fops_read,
.write = fm_v4l2_fops_write,
.poll = fm_v4l2_fops_poll,
.unlocked_ioctl = video_ioctl2,
.open = fm_v4l2_fops_open,
.release = fm_v4l2_fops_release,
};
static const struct v4l2_ctrl_ops fm_ctrl_ops = {
.s_ctrl = fm_v4l2_s_ctrl,
.g_volatile_ctrl = fm_g_volatile_ctrl,
};
static const struct v4l2_ioctl_ops fm_drv_ioctl_ops = {
.vidioc_querycap = fm_v4l2_vidioc_querycap,
.vidioc_g_audio = fm_v4l2_vidioc_g_audio,
.vidioc_s_audio = fm_v4l2_vidioc_s_audio,
.vidioc_g_tuner = fm_v4l2_vidioc_g_tuner,
.vidioc_s_tuner = fm_v4l2_vidioc_s_tuner,
.vidioc_g_frequency = fm_v4l2_vidioc_g_freq,
.vidioc_s_frequency = fm_v4l2_vidioc_s_freq,
.vidioc_s_hw_freq_seek = fm_v4l2_vidioc_s_hw_freq_seek,
.vidioc_g_modulator = fm_v4l2_vidioc_g_modulator,
.vidioc_s_modulator = fm_v4l2_vidioc_s_modulator
};
/* V4L2 RADIO device parent structure */
static struct video_device fm_viddev_template = {
.fops = &fm_drv_fops,
.ioctl_ops = &fm_drv_ioctl_ops,
.name = FM_DRV_NAME,
.release = video_device_release_empty,
/*
* To ensure both the tuner and modulator ioctls are accessible we
* set the vfl_dir to M2M to indicate this.
*
* It is not really a mem2mem device of course, but it can both receive
* and transmit using the same radio device. It's the only radio driver
* that does this and it should really be split in two radio devices,
* but that would affect applications using this driver.
*/
.vfl_dir = VFL_DIR_M2M,
};
int fm_v4l2_init_video_device(struct fmdev *fmdev, int radio_nr)
{
struct v4l2_ctrl *ctrl;
int ret;
strlcpy(fmdev->v4l2_dev.name, FM_DRV_NAME, sizeof(fmdev->v4l2_dev.name));
ret = v4l2_device_register(NULL, &fmdev->v4l2_dev);
if (ret < 0)
return ret;
/* Init mutex for core locking */
mutex_init(&fmdev->mutex);
/* Setup FM driver's V4L2 properties */
gradio_dev = fm_viddev_template;
video_set_drvdata(&gradio_dev, fmdev);
gradio_dev.lock = &fmdev->mutex;
gradio_dev.v4l2_dev = &fmdev->v4l2_dev;
/* Register with V4L2 subsystem as RADIO device */
if (video_register_device(&gradio_dev, VFL_TYPE_RADIO, radio_nr)) {
fmerr("Could not register video device\n");
return -ENOMEM;
}
fmdev->radio_dev = &gradio_dev;
/* Register to v4l2 ctrl handler framework */
fmdev->radio_dev->ctrl_handler = &fmdev->ctrl_handler;
ret = v4l2_ctrl_handler_init(&fmdev->ctrl_handler, 5);
if (ret < 0) {
fmerr("(fmdev): Can't init ctrl handler\n");
v4l2_ctrl_handler_free(&fmdev->ctrl_handler);
return -EBUSY;
}
/*
* Following controls are handled by V4L2 control framework.
* Added in ascending ID order.
*/
v4l2_ctrl_new_std(&fmdev->ctrl_handler, &fm_ctrl_ops,
V4L2_CID_AUDIO_VOLUME, FM_RX_VOLUME_MIN,
FM_RX_VOLUME_MAX, 1, FM_RX_VOLUME_MAX);
v4l2_ctrl_new_std(&fmdev->ctrl_handler, &fm_ctrl_ops,
V4L2_CID_AUDIO_MUTE, 0, 1, 1, 1);
v4l2_ctrl_new_std_menu(&fmdev->ctrl_handler, &fm_ctrl_ops,
V4L2_CID_TUNE_PREEMPHASIS, V4L2_PREEMPHASIS_75_uS,
0, V4L2_PREEMPHASIS_75_uS);
v4l2_ctrl_new_std(&fmdev->ctrl_handler, &fm_ctrl_ops,
V4L2_CID_TUNE_POWER_LEVEL, FM_PWR_LVL_LOW,
FM_PWR_LVL_HIGH, 1, FM_PWR_LVL_HIGH);
ctrl = v4l2_ctrl_new_std(&fmdev->ctrl_handler, &fm_ctrl_ops,
V4L2_CID_TUNE_ANTENNA_CAPACITOR, 0,
255, 1, 255);
if (ctrl)
ctrl->flags |= V4L2_CTRL_FLAG_VOLATILE;
return 0;
}
void *fm_v4l2_deinit_video_device(void)
{
struct fmdev *fmdev;
fmdev = video_get_drvdata(&gradio_dev);
/* Unregister to v4l2 ctrl handler framework*/
v4l2_ctrl_handler_free(&fmdev->ctrl_handler);
/* Unregister RADIO device from V4L2 subsystem */
video_unregister_device(&gradio_dev);
v4l2_device_unregister(&fmdev->v4l2_dev);
return fmdev;
}