OpenCloudOS-Kernel/drivers/gpu/drm/i915/i915_irq.c

2923 lines
80 KiB
C
Raw Normal View History

/* i915_irq.c -- IRQ support for the I915 -*- linux-c -*-
*/
/*
* Copyright 2003 Tungsten Graphics, Inc., Cedar Park, Texas.
* All Rights Reserved.
*
* Permission is hereby granted, free of charge, to any person obtaining a
* copy of this software and associated documentation files (the
* "Software"), to deal in the Software without restriction, including
* without limitation the rights to use, copy, modify, merge, publish,
* distribute, sub license, and/or sell copies of the Software, and to
* permit persons to whom the Software is furnished to do so, subject to
* the following conditions:
*
* The above copyright notice and this permission notice (including the
* next paragraph) shall be included in all copies or substantial portions
* of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
* OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT.
* IN NO EVENT SHALL TUNGSTEN GRAPHICS AND/OR ITS SUPPLIERS BE LIABLE FOR
* ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT,
* TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE
* SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
*
*/
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
#include <linux/sysrq.h>
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-24 16:04:11 +08:00
#include <linux/slab.h>
#include <drm/drmP.h>
#include <drm/i915_drm.h>
#include "i915_drv.h"
#include "i915_trace.h"
#include "intel_drv.h"
/* For display hotplug interrupt */
static void
ironlake_enable_display_irq(drm_i915_private_t *dev_priv, u32 mask)
{
if ((dev_priv->irq_mask & mask) != 0) {
dev_priv->irq_mask &= ~mask;
I915_WRITE(DEIMR, dev_priv->irq_mask);
POSTING_READ(DEIMR);
}
}
static inline void
ironlake_disable_display_irq(drm_i915_private_t *dev_priv, u32 mask)
{
if ((dev_priv->irq_mask & mask) != mask) {
dev_priv->irq_mask |= mask;
I915_WRITE(DEIMR, dev_priv->irq_mask);
POSTING_READ(DEIMR);
}
}
void
i915_enable_pipestat(drm_i915_private_t *dev_priv, int pipe, u32 mask)
{
u32 reg = PIPESTAT(pipe);
u32 pipestat = I915_READ(reg) & 0x7fff0000;
if ((pipestat & mask) == mask)
return;
/* Enable the interrupt, clear any pending status */
pipestat |= mask | (mask >> 16);
I915_WRITE(reg, pipestat);
POSTING_READ(reg);
}
void
i915_disable_pipestat(drm_i915_private_t *dev_priv, int pipe, u32 mask)
{
u32 reg = PIPESTAT(pipe);
u32 pipestat = I915_READ(reg) & 0x7fff0000;
if ((pipestat & mask) == 0)
return;
pipestat &= ~mask;
I915_WRITE(reg, pipestat);
POSTING_READ(reg);
}
/**
* intel_enable_asle - enable ASLE interrupt for OpRegion
*/
void intel_enable_asle(struct drm_device *dev)
{
drm_i915_private_t *dev_priv = dev->dev_private;
unsigned long irqflags;
/* FIXME: opregion/asle for VLV */
if (IS_VALLEYVIEW(dev))
return;
spin_lock_irqsave(&dev_priv->irq_lock, irqflags);
if (HAS_PCH_SPLIT(dev))
ironlake_enable_display_irq(dev_priv, DE_GSE);
else {
i915_enable_pipestat(dev_priv, 1,
PIPE_LEGACY_BLC_EVENT_ENABLE);
if (INTEL_INFO(dev)->gen >= 4)
i915_enable_pipestat(dev_priv, 0,
PIPE_LEGACY_BLC_EVENT_ENABLE);
}
spin_unlock_irqrestore(&dev_priv->irq_lock, irqflags);
}
/**
* i915_pipe_enabled - check if a pipe is enabled
* @dev: DRM device
* @pipe: pipe to check
*
* Reading certain registers when the pipe is disabled can hang the chip.
* Use this routine to make sure the PLL is running and the pipe is active
* before reading such registers if unsure.
*/
static int
i915_pipe_enabled(struct drm_device *dev, int pipe)
{
drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
enum transcoder cpu_transcoder = intel_pipe_to_cpu_transcoder(dev_priv,
pipe);
return I915_READ(PIPECONF(cpu_transcoder)) & PIPECONF_ENABLE;
}
/* Called from drm generic code, passed a 'crtc', which
* we use as a pipe index
*/
static u32 i915_get_vblank_counter(struct drm_device *dev, int pipe)
{
drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
unsigned long high_frame;
unsigned long low_frame;
u32 high1, high2, low;
if (!i915_pipe_enabled(dev, pipe)) {
DRM_DEBUG_DRIVER("trying to get vblank count for disabled "
"pipe %c\n", pipe_name(pipe));
return 0;
}
high_frame = PIPEFRAME(pipe);
low_frame = PIPEFRAMEPIXEL(pipe);
/*
* High & low register fields aren't synchronized, so make sure
* we get a low value that's stable across two reads of the high
* register.
*/
do {
high1 = I915_READ(high_frame) & PIPE_FRAME_HIGH_MASK;
low = I915_READ(low_frame) & PIPE_FRAME_LOW_MASK;
high2 = I915_READ(high_frame) & PIPE_FRAME_HIGH_MASK;
} while (high1 != high2);
high1 >>= PIPE_FRAME_HIGH_SHIFT;
low >>= PIPE_FRAME_LOW_SHIFT;
return (high1 << 8) | low;
}
static u32 gm45_get_vblank_counter(struct drm_device *dev, int pipe)
{
drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
int reg = PIPE_FRMCOUNT_GM45(pipe);
if (!i915_pipe_enabled(dev, pipe)) {
DRM_DEBUG_DRIVER("trying to get vblank count for disabled "
"pipe %c\n", pipe_name(pipe));
return 0;
}
return I915_READ(reg);
}
static int i915_get_crtc_scanoutpos(struct drm_device *dev, int pipe,
int *vpos, int *hpos)
{
drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
u32 vbl = 0, position = 0;
int vbl_start, vbl_end, htotal, vtotal;
bool in_vbl = true;
int ret = 0;
enum transcoder cpu_transcoder = intel_pipe_to_cpu_transcoder(dev_priv,
pipe);
if (!i915_pipe_enabled(dev, pipe)) {
DRM_DEBUG_DRIVER("trying to get scanoutpos for disabled "
"pipe %c\n", pipe_name(pipe));
return 0;
}
/* Get vtotal. */
vtotal = 1 + ((I915_READ(VTOTAL(cpu_transcoder)) >> 16) & 0x1fff);
if (INTEL_INFO(dev)->gen >= 4) {
/* No obvious pixelcount register. Only query vertical
* scanout position from Display scan line register.
*/
position = I915_READ(PIPEDSL(pipe));
/* Decode into vertical scanout position. Don't have
* horizontal scanout position.
*/
*vpos = position & 0x1fff;
*hpos = 0;
} else {
/* Have access to pixelcount since start of frame.
* We can split this into vertical and horizontal
* scanout position.
*/
position = (I915_READ(PIPEFRAMEPIXEL(pipe)) & PIPE_PIXEL_MASK) >> PIPE_PIXEL_SHIFT;
htotal = 1 + ((I915_READ(HTOTAL(cpu_transcoder)) >> 16) & 0x1fff);
*vpos = position / htotal;
*hpos = position - (*vpos * htotal);
}
/* Query vblank area. */
vbl = I915_READ(VBLANK(cpu_transcoder));
/* Test position against vblank region. */
vbl_start = vbl & 0x1fff;
vbl_end = (vbl >> 16) & 0x1fff;
if ((*vpos < vbl_start) || (*vpos > vbl_end))
in_vbl = false;
/* Inside "upper part" of vblank area? Apply corrective offset: */
if (in_vbl && (*vpos >= vbl_start))
*vpos = *vpos - vtotal;
/* Readouts valid? */
if (vbl > 0)
ret |= DRM_SCANOUTPOS_VALID | DRM_SCANOUTPOS_ACCURATE;
/* In vblank? */
if (in_vbl)
ret |= DRM_SCANOUTPOS_INVBL;
return ret;
}
static int i915_get_vblank_timestamp(struct drm_device *dev, int pipe,
int *max_error,
struct timeval *vblank_time,
unsigned flags)
{
struct drm_i915_private *dev_priv = dev->dev_private;
struct drm_crtc *crtc;
if (pipe < 0 || pipe >= dev_priv->num_pipe) {
DRM_ERROR("Invalid crtc %d\n", pipe);
return -EINVAL;
}
/* Get drm_crtc to timestamp: */
crtc = intel_get_crtc_for_pipe(dev, pipe);
if (crtc == NULL) {
DRM_ERROR("Invalid crtc %d\n", pipe);
return -EINVAL;
}
if (!crtc->enabled) {
DRM_DEBUG_KMS("crtc %d is disabled\n", pipe);
return -EBUSY;
}
/* Helper routine in DRM core does all the work: */
return drm_calc_vbltimestamp_from_scanoutpos(dev, pipe, max_error,
vblank_time, flags,
crtc);
}
/*
* Handle hotplug events outside the interrupt handler proper.
*/
static void i915_hotplug_work_func(struct work_struct *work)
{
drm_i915_private_t *dev_priv = container_of(work, drm_i915_private_t,
hotplug_work);
struct drm_device *dev = dev_priv->dev;
struct drm_mode_config *mode_config = &dev->mode_config;
struct intel_encoder *encoder;
/* HPD irq before everything is fully set up. */
if (!dev_priv->enable_hotplug_processing)
return;
mutex_lock(&mode_config->mutex);
DRM_DEBUG_KMS("running encoder hotplug functions\n");
list_for_each_entry(encoder, &mode_config->encoder_list, base.head)
if (encoder->hot_plug)
encoder->hot_plug(encoder);
mutex_unlock(&mode_config->mutex);
/* Just fire off a uevent and let userspace tell us what to do */
drm_helper_hpd_irq_event(dev);
}
static void ironlake_handle_rps_change(struct drm_device *dev)
{
drm_i915_private_t *dev_priv = dev->dev_private;
u32 busy_up, busy_down, max_avg, min_avg;
u8 new_delay;
unsigned long flags;
spin_lock_irqsave(&mchdev_lock, flags);
I915_WRITE16(MEMINTRSTS, I915_READ(MEMINTRSTS));
new_delay = dev_priv->ips.cur_delay;
I915_WRITE16(MEMINTRSTS, MEMINT_EVAL_CHG);
busy_up = I915_READ(RCPREVBSYTUPAVG);
busy_down = I915_READ(RCPREVBSYTDNAVG);
max_avg = I915_READ(RCBMAXAVG);
min_avg = I915_READ(RCBMINAVG);
/* Handle RCS change request from hw */
if (busy_up > max_avg) {
if (dev_priv->ips.cur_delay != dev_priv->ips.max_delay)
new_delay = dev_priv->ips.cur_delay - 1;
if (new_delay < dev_priv->ips.max_delay)
new_delay = dev_priv->ips.max_delay;
} else if (busy_down < min_avg) {
if (dev_priv->ips.cur_delay != dev_priv->ips.min_delay)
new_delay = dev_priv->ips.cur_delay + 1;
if (new_delay > dev_priv->ips.min_delay)
new_delay = dev_priv->ips.min_delay;
}
if (ironlake_set_drps(dev, new_delay))
dev_priv->ips.cur_delay = new_delay;
spin_unlock_irqrestore(&mchdev_lock, flags);
return;
}
static void notify_ring(struct drm_device *dev,
struct intel_ring_buffer *ring)
{
struct drm_i915_private *dev_priv = dev->dev_private;
if (ring->obj == NULL)
return;
trace_i915_gem_request_complete(ring, ring->get_seqno(ring, false));
wake_up_all(&ring->irq_queue);
if (i915_enable_hangcheck) {
dev_priv->gpu_error.hangcheck_count = 0;
mod_timer(&dev_priv->gpu_error.hangcheck_timer,
round_jiffies_up(jiffies + DRM_I915_HANGCHECK_JIFFIES));
}
}
static void gen6_pm_rps_work(struct work_struct *work)
{
drm_i915_private_t *dev_priv = container_of(work, drm_i915_private_t,
rps.work);
u32 pm_iir, pm_imr;
u8 new_delay;
spin_lock_irq(&dev_priv->rps.lock);
pm_iir = dev_priv->rps.pm_iir;
dev_priv->rps.pm_iir = 0;
pm_imr = I915_READ(GEN6_PMIMR);
I915_WRITE(GEN6_PMIMR, 0);
spin_unlock_irq(&dev_priv->rps.lock);
if ((pm_iir & GEN6_PM_DEFERRED_EVENTS) == 0)
return;
mutex_lock(&dev_priv->rps.hw_lock);
if (pm_iir & GEN6_PM_RP_UP_THRESHOLD)
new_delay = dev_priv->rps.cur_delay + 1;
else
new_delay = dev_priv->rps.cur_delay - 1;
/* sysfs frequency interfaces may have snuck in while servicing the
* interrupt
*/
if (!(new_delay > dev_priv->rps.max_delay ||
new_delay < dev_priv->rps.min_delay)) {
gen6_set_rps(dev_priv->dev, new_delay);
}
mutex_unlock(&dev_priv->rps.hw_lock);
}
/**
* ivybridge_parity_work - Workqueue called when a parity error interrupt
* occurred.
* @work: workqueue struct
*
* Doesn't actually do anything except notify userspace. As a consequence of
* this event, userspace should try to remap the bad rows since statistically
* it is likely the same row is more likely to go bad again.
*/
static void ivybridge_parity_work(struct work_struct *work)
{
drm_i915_private_t *dev_priv = container_of(work, drm_i915_private_t,
l3_parity.error_work);
u32 error_status, row, bank, subbank;
char *parity_event[5];
uint32_t misccpctl;
unsigned long flags;
/* We must turn off DOP level clock gating to access the L3 registers.
* In order to prevent a get/put style interface, acquire struct mutex
* any time we access those registers.
*/
mutex_lock(&dev_priv->dev->struct_mutex);
misccpctl = I915_READ(GEN7_MISCCPCTL);
I915_WRITE(GEN7_MISCCPCTL, misccpctl & ~GEN7_DOP_CLOCK_GATE_ENABLE);
POSTING_READ(GEN7_MISCCPCTL);
error_status = I915_READ(GEN7_L3CDERRST1);
row = GEN7_PARITY_ERROR_ROW(error_status);
bank = GEN7_PARITY_ERROR_BANK(error_status);
subbank = GEN7_PARITY_ERROR_SUBBANK(error_status);
I915_WRITE(GEN7_L3CDERRST1, GEN7_PARITY_ERROR_VALID |
GEN7_L3CDERRST1_ENABLE);
POSTING_READ(GEN7_L3CDERRST1);
I915_WRITE(GEN7_MISCCPCTL, misccpctl);
spin_lock_irqsave(&dev_priv->irq_lock, flags);
dev_priv->gt_irq_mask &= ~GT_GEN7_L3_PARITY_ERROR_INTERRUPT;
I915_WRITE(GTIMR, dev_priv->gt_irq_mask);
spin_unlock_irqrestore(&dev_priv->irq_lock, flags);
mutex_unlock(&dev_priv->dev->struct_mutex);
parity_event[0] = "L3_PARITY_ERROR=1";
parity_event[1] = kasprintf(GFP_KERNEL, "ROW=%d", row);
parity_event[2] = kasprintf(GFP_KERNEL, "BANK=%d", bank);
parity_event[3] = kasprintf(GFP_KERNEL, "SUBBANK=%d", subbank);
parity_event[4] = NULL;
kobject_uevent_env(&dev_priv->dev->primary->kdev.kobj,
KOBJ_CHANGE, parity_event);
DRM_DEBUG("Parity error: Row = %d, Bank = %d, Sub bank = %d.\n",
row, bank, subbank);
kfree(parity_event[3]);
kfree(parity_event[2]);
kfree(parity_event[1]);
}
static void ivybridge_handle_parity_error(struct drm_device *dev)
{
drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
unsigned long flags;
if (!HAS_L3_GPU_CACHE(dev))
return;
spin_lock_irqsave(&dev_priv->irq_lock, flags);
dev_priv->gt_irq_mask |= GT_GEN7_L3_PARITY_ERROR_INTERRUPT;
I915_WRITE(GTIMR, dev_priv->gt_irq_mask);
spin_unlock_irqrestore(&dev_priv->irq_lock, flags);
queue_work(dev_priv->wq, &dev_priv->l3_parity.error_work);
}
static void snb_gt_irq_handler(struct drm_device *dev,
struct drm_i915_private *dev_priv,
u32 gt_iir)
{
if (gt_iir & (GEN6_RENDER_USER_INTERRUPT |
GEN6_RENDER_PIPE_CONTROL_NOTIFY_INTERRUPT))
notify_ring(dev, &dev_priv->ring[RCS]);
if (gt_iir & GEN6_BSD_USER_INTERRUPT)
notify_ring(dev, &dev_priv->ring[VCS]);
if (gt_iir & GEN6_BLITTER_USER_INTERRUPT)
notify_ring(dev, &dev_priv->ring[BCS]);
if (gt_iir & (GT_GEN6_BLT_CS_ERROR_INTERRUPT |
GT_GEN6_BSD_CS_ERROR_INTERRUPT |
GT_RENDER_CS_ERROR_INTERRUPT)) {
DRM_ERROR("GT error interrupt 0x%08x\n", gt_iir);
i915_handle_error(dev, false);
}
if (gt_iir & GT_GEN7_L3_PARITY_ERROR_INTERRUPT)
ivybridge_handle_parity_error(dev);
}
static void gen6_queue_rps_work(struct drm_i915_private *dev_priv,
u32 pm_iir)
{
unsigned long flags;
/*
* IIR bits should never already be set because IMR should
* prevent an interrupt from being shown in IIR. The warning
* displays a case where we've unsafely cleared
* dev_priv->rps.pm_iir. Although missing an interrupt of the same
* type is not a problem, it displays a problem in the logic.
*
* The mask bit in IMR is cleared by dev_priv->rps.work.
*/
spin_lock_irqsave(&dev_priv->rps.lock, flags);
dev_priv->rps.pm_iir |= pm_iir;
I915_WRITE(GEN6_PMIMR, dev_priv->rps.pm_iir);
POSTING_READ(GEN6_PMIMR);
spin_unlock_irqrestore(&dev_priv->rps.lock, flags);
queue_work(dev_priv->wq, &dev_priv->rps.work);
}
static void gmbus_irq_handler(struct drm_device *dev)
{
drm/i915: use the gmbus irq for waits We need two special things to properly wire this up: - Add another argument to gmbus_wait_hw_status to pass in the correct interrupt bit in gmbus4. - Since we can only get an irq for one of the two events we want, hand-roll the wait_event_timeout code so that we wake up every jiffie and can check for NAKs. This way we also subsume gmbus support for platforms without interrupts (or where those are not yet enabled). The important bit really is to only enable one gmbus interrupt source at the same time - with that piece of lore figured out, this seems to work flawlessly. Ben Widawsky rightfully complained the lack of measurements for the claimed benefits (especially since the first version was actually broken and fell back to bit-banging). Previously reading the 256 byte hdmi EDID takes about 72 ms here. With this patch it's down to 33 ms. Given that transfering the 256 bytes over i2c at wire speed takes 20.5ms alone, the reduction in additional overhead is rather nice. v2: Chris Wilson wondered whether GMBUS4 might contain some set bits when booting up an hence result in some spurious interrupts. Since we clear GMBUS4 after every wait and we do gmbus transfer really early in the setup sequence to detect displays the window is small, but still be paranoid and clear it properly. v3: Clarify the comment that gmbus irq generation can only support one kind of event, why it bothers us and how we work around that limit. Cc: Daniel Kurtz <djkurtz@chromium.org> Reviewed-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-12-01 20:53:45 +08:00
struct drm_i915_private *dev_priv = (drm_i915_private_t *) dev->dev_private;
wake_up_all(&dev_priv->gmbus_wait_queue);
}
static void dp_aux_irq_handler(struct drm_device *dev)
{
drm/i915: irq-drive the dp aux communication At least on the platforms that have a dp aux irq and also have it enabled - vlvhsw should have one, too. But I don't have a machine to test this on. Judging from docs there's no dp aux interrupt for gm45. Also, I only have an ivb cpu edp machine, so the dp aux A code for snb/ilk is untested. For dpcd probing when nothing is connected it slashes about 5ms of cpu time (cpu time is now negligible), which agrees with 3 * 5 400 usec timeouts. A previous version of this patch increases the time required to go through the dp_detect cycle (which includes reading the edid) from around 33 ms to around 40 ms. Experiments indicated that this is purely due to the irq latency - the hw doesn't allow us to queue up dp aux transactions and hence irq latency directly affects throughput. gmbus is much better, there we have a 8 byte buffer, and we get the irq once another 4 bytes can be queued up. But by using the pm_qos interface to request the lowest possible cpu wake-up latency this slowdown completely disappeared. Since all our output detection logic is single-threaded with the mode_config mutex right now anyway, I've decide not ot play fancy and to just reuse the gmbus wait queue. But this would definitely prep the way to run dp detection on different ports in parallel v2: Add a timeout for dp aux transfers when using interrupts - the hw _does_ prevent this with the hw-based 400 usec timeout, but if the irq somehow doesn't arrive we're screwed. Lesson learned while developing this ;-) v3: While at it also convert the busy-loop to wait_for_atomic, so that we don't run the risk of an infinite loop any more. v4: Ensure we have the smallest possible irq latency by using the pm_qos interface. v5: Add a comment to the code to explain why we frob pm_qos. Suggested by Chris Wilson. v6: Disable dp irq for vlv, that's easier than trying to get at docs and hw. v7: Squash in a fix for Haswell that Paulo Zanoni tracked down - the dp aux registers aren't at a fixed offset any more, but can be on the PCH while the DP port is on the cpu die. Reviewed-by: Imre Deak <imre.deak@intel.com> (v6) Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-12-01 20:53:48 +08:00
struct drm_i915_private *dev_priv = (drm_i915_private_t *) dev->dev_private;
wake_up_all(&dev_priv->gmbus_wait_queue);
}
static irqreturn_t valleyview_irq_handler(int irq, void *arg)
{
struct drm_device *dev = (struct drm_device *) arg;
drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
u32 iir, gt_iir, pm_iir;
irqreturn_t ret = IRQ_NONE;
unsigned long irqflags;
int pipe;
u32 pipe_stats[I915_MAX_PIPES];
atomic_inc(&dev_priv->irq_received);
while (true) {
iir = I915_READ(VLV_IIR);
gt_iir = I915_READ(GTIIR);
pm_iir = I915_READ(GEN6_PMIIR);
if (gt_iir == 0 && pm_iir == 0 && iir == 0)
goto out;
ret = IRQ_HANDLED;
snb_gt_irq_handler(dev, dev_priv, gt_iir);
spin_lock_irqsave(&dev_priv->irq_lock, irqflags);
for_each_pipe(pipe) {
int reg = PIPESTAT(pipe);
pipe_stats[pipe] = I915_READ(reg);
/*
* Clear the PIPE*STAT regs before the IIR
*/
if (pipe_stats[pipe] & 0x8000ffff) {
if (pipe_stats[pipe] & PIPE_FIFO_UNDERRUN_STATUS)
DRM_DEBUG_DRIVER("pipe %c underrun\n",
pipe_name(pipe));
I915_WRITE(reg, pipe_stats[pipe]);
}
}
spin_unlock_irqrestore(&dev_priv->irq_lock, irqflags);
for_each_pipe(pipe) {
if (pipe_stats[pipe] & PIPE_VBLANK_INTERRUPT_STATUS)
drm_handle_vblank(dev, pipe);
if (pipe_stats[pipe] & PLANE_FLIPDONE_INT_STATUS_VLV) {
intel_prepare_page_flip(dev, pipe);
intel_finish_page_flip(dev, pipe);
}
}
/* Consume port. Then clear IIR or we'll miss events */
if (iir & I915_DISPLAY_PORT_INTERRUPT) {
u32 hotplug_status = I915_READ(PORT_HOTPLUG_STAT);
DRM_DEBUG_DRIVER("hotplug event received, stat 0x%08x\n",
hotplug_status);
if (hotplug_status & dev_priv->hotplug_supported_mask)
queue_work(dev_priv->wq,
&dev_priv->hotplug_work);
I915_WRITE(PORT_HOTPLUG_STAT, hotplug_status);
I915_READ(PORT_HOTPLUG_STAT);
}
if (pipe_stats[0] & PIPE_GMBUS_INTERRUPT_STATUS)
gmbus_irq_handler(dev);
if (pm_iir & GEN6_PM_DEFERRED_EVENTS)
gen6_queue_rps_work(dev_priv, pm_iir);
I915_WRITE(GTIIR, gt_iir);
I915_WRITE(GEN6_PMIIR, pm_iir);
I915_WRITE(VLV_IIR, iir);
}
out:
return ret;
}
static void ibx_irq_handler(struct drm_device *dev, u32 pch_iir)
{
drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
int pipe;
if (pch_iir & SDE_HOTPLUG_MASK)
queue_work(dev_priv->wq, &dev_priv->hotplug_work);
if (pch_iir & SDE_AUDIO_POWER_MASK)
DRM_DEBUG_DRIVER("PCH audio power change on port %d\n",
(pch_iir & SDE_AUDIO_POWER_MASK) >>
SDE_AUDIO_POWER_SHIFT);
if (pch_iir & SDE_AUX_MASK)
dp_aux_irq_handler(dev);
if (pch_iir & SDE_GMBUS)
gmbus_irq_handler(dev);
if (pch_iir & SDE_AUDIO_HDCP_MASK)
DRM_DEBUG_DRIVER("PCH HDCP audio interrupt\n");
if (pch_iir & SDE_AUDIO_TRANS_MASK)
DRM_DEBUG_DRIVER("PCH transcoder audio interrupt\n");
if (pch_iir & SDE_POISON)
DRM_ERROR("PCH poison interrupt\n");
if (pch_iir & SDE_FDI_MASK)
for_each_pipe(pipe)
DRM_DEBUG_DRIVER(" pipe %c FDI IIR: 0x%08x\n",
pipe_name(pipe),
I915_READ(FDI_RX_IIR(pipe)));
if (pch_iir & (SDE_TRANSB_CRC_DONE | SDE_TRANSA_CRC_DONE))
DRM_DEBUG_DRIVER("PCH transcoder CRC done interrupt\n");
if (pch_iir & (SDE_TRANSB_CRC_ERR | SDE_TRANSA_CRC_ERR))
DRM_DEBUG_DRIVER("PCH transcoder CRC error interrupt\n");
if (pch_iir & SDE_TRANSB_FIFO_UNDER)
DRM_DEBUG_DRIVER("PCH transcoder B underrun interrupt\n");
if (pch_iir & SDE_TRANSA_FIFO_UNDER)
DRM_DEBUG_DRIVER("PCH transcoder A underrun interrupt\n");
}
static void cpt_irq_handler(struct drm_device *dev, u32 pch_iir)
{
drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
int pipe;
if (pch_iir & SDE_HOTPLUG_MASK_CPT)
queue_work(dev_priv->wq, &dev_priv->hotplug_work);
if (pch_iir & SDE_AUDIO_POWER_MASK_CPT)
DRM_DEBUG_DRIVER("PCH audio power change on port %d\n",
(pch_iir & SDE_AUDIO_POWER_MASK_CPT) >>
SDE_AUDIO_POWER_SHIFT_CPT);
if (pch_iir & SDE_AUX_MASK_CPT)
dp_aux_irq_handler(dev);
if (pch_iir & SDE_GMBUS_CPT)
gmbus_irq_handler(dev);
if (pch_iir & SDE_AUDIO_CP_REQ_CPT)
DRM_DEBUG_DRIVER("Audio CP request interrupt\n");
if (pch_iir & SDE_AUDIO_CP_CHG_CPT)
DRM_DEBUG_DRIVER("Audio CP change interrupt\n");
if (pch_iir & SDE_FDI_MASK_CPT)
for_each_pipe(pipe)
DRM_DEBUG_DRIVER(" pipe %c FDI IIR: 0x%08x\n",
pipe_name(pipe),
I915_READ(FDI_RX_IIR(pipe)));
}
static irqreturn_t ivybridge_irq_handler(int irq, void *arg)
{
struct drm_device *dev = (struct drm_device *) arg;
drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
u32 de_iir, gt_iir, de_ier, pm_iir;
irqreturn_t ret = IRQ_NONE;
int i;
atomic_inc(&dev_priv->irq_received);
/* disable master interrupt before clearing iir */
de_ier = I915_READ(DEIER);
I915_WRITE(DEIER, de_ier & ~DE_MASTER_IRQ_CONTROL);
gt_iir = I915_READ(GTIIR);
if (gt_iir) {
snb_gt_irq_handler(dev, dev_priv, gt_iir);
I915_WRITE(GTIIR, gt_iir);
ret = IRQ_HANDLED;
}
de_iir = I915_READ(DEIIR);
if (de_iir) {
if (de_iir & DE_AUX_CHANNEL_A_IVB)
dp_aux_irq_handler(dev);
if (de_iir & DE_GSE_IVB)
intel_opregion_gse_intr(dev);
for (i = 0; i < 3; i++) {
if (de_iir & (DE_PIPEA_VBLANK_IVB << (5 * i)))
drm_handle_vblank(dev, i);
if (de_iir & (DE_PLANEA_FLIP_DONE_IVB << (5 * i))) {
intel_prepare_page_flip(dev, i);
intel_finish_page_flip_plane(dev, i);
}
}
/* check event from PCH */
if (de_iir & DE_PCH_EVENT_IVB) {
u32 pch_iir = I915_READ(SDEIIR);
cpt_irq_handler(dev, pch_iir);
/* clear PCH hotplug event before clear CPU irq */
I915_WRITE(SDEIIR, pch_iir);
}
I915_WRITE(DEIIR, de_iir);
ret = IRQ_HANDLED;
}
pm_iir = I915_READ(GEN6_PMIIR);
if (pm_iir) {
if (pm_iir & GEN6_PM_DEFERRED_EVENTS)
gen6_queue_rps_work(dev_priv, pm_iir);
I915_WRITE(GEN6_PMIIR, pm_iir);
ret = IRQ_HANDLED;
}
I915_WRITE(DEIER, de_ier);
POSTING_READ(DEIER);
return ret;
}
static void ilk_gt_irq_handler(struct drm_device *dev,
struct drm_i915_private *dev_priv,
u32 gt_iir)
{
if (gt_iir & (GT_USER_INTERRUPT | GT_PIPE_NOTIFY))
notify_ring(dev, &dev_priv->ring[RCS]);
if (gt_iir & GT_BSD_USER_INTERRUPT)
notify_ring(dev, &dev_priv->ring[VCS]);
}
static irqreturn_t ironlake_irq_handler(int irq, void *arg)
{
struct drm_device *dev = (struct drm_device *) arg;
drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
int ret = IRQ_NONE;
u32 de_iir, gt_iir, de_ier, pm_iir;
atomic_inc(&dev_priv->irq_received);
/* disable master interrupt before clearing iir */
de_ier = I915_READ(DEIER);
I915_WRITE(DEIER, de_ier & ~DE_MASTER_IRQ_CONTROL);
POSTING_READ(DEIER);
de_iir = I915_READ(DEIIR);
gt_iir = I915_READ(GTIIR);
pm_iir = I915_READ(GEN6_PMIIR);
if (de_iir == 0 && gt_iir == 0 && (!IS_GEN6(dev) || pm_iir == 0))
goto done;
ret = IRQ_HANDLED;
if (IS_GEN5(dev))
ilk_gt_irq_handler(dev, dev_priv, gt_iir);
else
snb_gt_irq_handler(dev, dev_priv, gt_iir);
if (de_iir & DE_AUX_CHANNEL_A)
dp_aux_irq_handler(dev);
if (de_iir & DE_GSE)
intel_opregion_gse_intr(dev);
if (de_iir & DE_PIPEA_VBLANK)
drm_handle_vblank(dev, 0);
if (de_iir & DE_PIPEB_VBLANK)
drm_handle_vblank(dev, 1);
if (de_iir & DE_PLANEA_FLIP_DONE) {
intel_prepare_page_flip(dev, 0);
intel_finish_page_flip_plane(dev, 0);
}
if (de_iir & DE_PLANEB_FLIP_DONE) {
intel_prepare_page_flip(dev, 1);
intel_finish_page_flip_plane(dev, 1);
}
/* check event from PCH */
if (de_iir & DE_PCH_EVENT) {
u32 pch_iir = I915_READ(SDEIIR);
if (HAS_PCH_CPT(dev))
cpt_irq_handler(dev, pch_iir);
else
ibx_irq_handler(dev, pch_iir);
/* should clear PCH hotplug event before clear CPU irq */
I915_WRITE(SDEIIR, pch_iir);
}
if (IS_GEN5(dev) && de_iir & DE_PCU_EVENT)
ironlake_handle_rps_change(dev);
if (IS_GEN6(dev) && pm_iir & GEN6_PM_DEFERRED_EVENTS)
gen6_queue_rps_work(dev_priv, pm_iir);
I915_WRITE(GTIIR, gt_iir);
I915_WRITE(DEIIR, de_iir);
I915_WRITE(GEN6_PMIIR, pm_iir);
done:
I915_WRITE(DEIER, de_ier);
POSTING_READ(DEIER);
return ret;
}
/**
* i915_error_work_func - do process context error handling work
* @work: work struct
*
* Fire an error uevent so userspace can see that a hang or error
* was detected.
*/
static void i915_error_work_func(struct work_struct *work)
{
drm/i915: clear up wedged transitions We have two important transitions of the wedged state in the current code: - 0 -> 1: This means a hang has been detected, and signals to everyone that they please get of any locks, so that the reset work item can do its job. - 1 -> 0: The reset handler has completed. Now the last transition mixes up two states: "Reset completed and successful" and "Reset failed". To distinguish these two we do some tricks with the reset completion, but I simply could not convince myself that this doesn't race under odd circumstances. Hence split this up, and add a new terminal state indicating that the hw is gone for good. Also add explicit #defines for both states, update comments. v2: Split out the reset handling bugfix for the throttle ioctl. v3: s/tmp/wedged/ sugested by Chris Wilson. Also fixup up a rebase error which prevented this patch from actually compiling. v4: To unify the wedged state with the reset counter, keep the reset-in-progress state just as a flag. The terminally-wedged state is now denoted with a big number. v5: Add a comment to the reset_counter special values explaining that WEDGED & RESET_IN_PROGRESS needs to be true for the code to be correct. v6: Fixup logic errors introduced with the wedged+reset_counter unification. Since WEDGED implies reset-in-progress (in a way we're terminally stuck in the dead-but-reset-not-completed state), we need ensure that we check for this everywhere. The specific bug was in wait_for_error, which would simply have timed out. v7: Extract an inline i915_reset_in_progress helper to make the code more readable. Also annote the reset-in-progress case with an unlikely, to help the compiler optimize the fastpath. Do the same for the terminally wedged case with i915_terminally_wedged. Reviewed-by: Damien Lespiau <damien.lespiau@intel.com> Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-11-16 00:17:22 +08:00
struct i915_gpu_error *error = container_of(work, struct i915_gpu_error,
work);
drm_i915_private_t *dev_priv = container_of(error, drm_i915_private_t,
gpu_error);
struct drm_device *dev = dev_priv->dev;
drm/i915: create a race-free reset detection With the previous patch the state transition handling of the reset code itself is now (hopefully) race free and solid. But that still leaves out everyone else - with the various lock-free wait paths we have there's the possibility that the reset happens between the point where we read the seqno we should wait on and the actual wait. And if __wait_seqno then never sees the RESET_IN_PROGRESS state, we'll happily wait for a seqno which will in all likelyhood never signal. In practice this is not a big problem since the X server gets constantly interrupted, and can then submit more work (hopefully) to unblock everyone else: As soon as a new seqno write lands, all waiters will unblock. But running the i-g-t reset testcase ZZ_hangman can expose this race, especially on slower hw with fewer cpu cores. Now looking forward to ARB_robustness and friends that's not the best possible behaviour, hence this patch adds a reset_counter to be able to detect any reset, even if a given thread never observed the in-progress state. The important part is to correctly order things: - The write side needs to increment the counter after any seqno gets reset. Hence we need to do that at the end of the reset work, and again wake everyone up. We also need to place a barrier in between any possible seqno changes and the counter increment, since any unlock operations only guarantee that nothing leaks out, but not that at later load operation gets moved ahead. - On the read side we need to ensure that no reset can sneak in and invalidate the seqno. In all cases we can use the one-sided barrier that unlock operations guarantee (of the lock protecting the respective seqno/ring pair) to ensure correct ordering. Hence it is sufficient to place the atomic read before the mutex/spin_unlock and no additional barriers are required. The end-result of all this is that we need to wake up everyone twice in a reset operation: - First, before the reset starts, to get any lockholders of the locks, so that the reset can proceed. - Second, after the reset is completed, to allow waiters to properly and reliably detect the reset condition and bail out. I admit that this entire reset_counter thing smells a bit like overkill, but I think it's justified since it makes it really explicit what the bail-out condition is. And we need a reset counter anyway to implement ARB_robustness, and imo with finer-grained locking on the horizont this is the most resilient scheme I could think of. v2: Drop spurious change in the wait_for_error EXIT_COND - we only need to wait until we leave the reset-in-progress wedged state. v3: Don't play tricks with barriers in the throttle ioctl, the spin_unlock is barrier enough. I've also considered using a little helper to grab the current reset_counter, but then decided that hiding the atomic_read isn't a great idea, since having it explicitly show up in the code is a nice remainder to reviews to check the memory barriers. v4: Add a comment to explain why we need to fall through in __wait_seqno in the end variable assignments. v5: Review from Damien: - s/smb/smp/ in a comment - don't increment the reset counter after we've set it to WEDGED. Now we (again) properly wedge the gpu when the reset fails. Reviewed-by: Damien Lespiau <damien.lespiau@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-12-06 16:01:42 +08:00
struct intel_ring_buffer *ring;
char *error_event[] = { "ERROR=1", NULL };
char *reset_event[] = { "RESET=1", NULL };
char *reset_done_event[] = { "ERROR=0", NULL };
drm/i915: create a race-free reset detection With the previous patch the state transition handling of the reset code itself is now (hopefully) race free and solid. But that still leaves out everyone else - with the various lock-free wait paths we have there's the possibility that the reset happens between the point where we read the seqno we should wait on and the actual wait. And if __wait_seqno then never sees the RESET_IN_PROGRESS state, we'll happily wait for a seqno which will in all likelyhood never signal. In practice this is not a big problem since the X server gets constantly interrupted, and can then submit more work (hopefully) to unblock everyone else: As soon as a new seqno write lands, all waiters will unblock. But running the i-g-t reset testcase ZZ_hangman can expose this race, especially on slower hw with fewer cpu cores. Now looking forward to ARB_robustness and friends that's not the best possible behaviour, hence this patch adds a reset_counter to be able to detect any reset, even if a given thread never observed the in-progress state. The important part is to correctly order things: - The write side needs to increment the counter after any seqno gets reset. Hence we need to do that at the end of the reset work, and again wake everyone up. We also need to place a barrier in between any possible seqno changes and the counter increment, since any unlock operations only guarantee that nothing leaks out, but not that at later load operation gets moved ahead. - On the read side we need to ensure that no reset can sneak in and invalidate the seqno. In all cases we can use the one-sided barrier that unlock operations guarantee (of the lock protecting the respective seqno/ring pair) to ensure correct ordering. Hence it is sufficient to place the atomic read before the mutex/spin_unlock and no additional barriers are required. The end-result of all this is that we need to wake up everyone twice in a reset operation: - First, before the reset starts, to get any lockholders of the locks, so that the reset can proceed. - Second, after the reset is completed, to allow waiters to properly and reliably detect the reset condition and bail out. I admit that this entire reset_counter thing smells a bit like overkill, but I think it's justified since it makes it really explicit what the bail-out condition is. And we need a reset counter anyway to implement ARB_robustness, and imo with finer-grained locking on the horizont this is the most resilient scheme I could think of. v2: Drop spurious change in the wait_for_error EXIT_COND - we only need to wait until we leave the reset-in-progress wedged state. v3: Don't play tricks with barriers in the throttle ioctl, the spin_unlock is barrier enough. I've also considered using a little helper to grab the current reset_counter, but then decided that hiding the atomic_read isn't a great idea, since having it explicitly show up in the code is a nice remainder to reviews to check the memory barriers. v4: Add a comment to explain why we need to fall through in __wait_seqno in the end variable assignments. v5: Review from Damien: - s/smb/smp/ in a comment - don't increment the reset counter after we've set it to WEDGED. Now we (again) properly wedge the gpu when the reset fails. Reviewed-by: Damien Lespiau <damien.lespiau@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-12-06 16:01:42 +08:00
int i, ret;
kobject_uevent_env(&dev->primary->kdev.kobj, KOBJ_CHANGE, error_event);
/*
* Note that there's only one work item which does gpu resets, so we
* need not worry about concurrent gpu resets potentially incrementing
* error->reset_counter twice. We only need to take care of another
* racing irq/hangcheck declaring the gpu dead for a second time. A
* quick check for that is good enough: schedule_work ensures the
* correct ordering between hang detection and this work item, and since
* the reset in-progress bit is only ever set by code outside of this
* work we don't need to worry about any other races.
*/
if (i915_reset_in_progress(error) && !i915_terminally_wedged(error)) {
DRM_DEBUG_DRIVER("resetting chip\n");
kobject_uevent_env(&dev->primary->kdev.kobj, KOBJ_CHANGE,
reset_event);
drm/i915: clear up wedged transitions We have two important transitions of the wedged state in the current code: - 0 -> 1: This means a hang has been detected, and signals to everyone that they please get of any locks, so that the reset work item can do its job. - 1 -> 0: The reset handler has completed. Now the last transition mixes up two states: "Reset completed and successful" and "Reset failed". To distinguish these two we do some tricks with the reset completion, but I simply could not convince myself that this doesn't race under odd circumstances. Hence split this up, and add a new terminal state indicating that the hw is gone for good. Also add explicit #defines for both states, update comments. v2: Split out the reset handling bugfix for the throttle ioctl. v3: s/tmp/wedged/ sugested by Chris Wilson. Also fixup up a rebase error which prevented this patch from actually compiling. v4: To unify the wedged state with the reset counter, keep the reset-in-progress state just as a flag. The terminally-wedged state is now denoted with a big number. v5: Add a comment to the reset_counter special values explaining that WEDGED & RESET_IN_PROGRESS needs to be true for the code to be correct. v6: Fixup logic errors introduced with the wedged+reset_counter unification. Since WEDGED implies reset-in-progress (in a way we're terminally stuck in the dead-but-reset-not-completed state), we need ensure that we check for this everywhere. The specific bug was in wait_for_error, which would simply have timed out. v7: Extract an inline i915_reset_in_progress helper to make the code more readable. Also annote the reset-in-progress case with an unlikely, to help the compiler optimize the fastpath. Do the same for the terminally wedged case with i915_terminally_wedged. Reviewed-by: Damien Lespiau <damien.lespiau@intel.com> Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-11-16 00:17:22 +08:00
drm/i915: create a race-free reset detection With the previous patch the state transition handling of the reset code itself is now (hopefully) race free and solid. But that still leaves out everyone else - with the various lock-free wait paths we have there's the possibility that the reset happens between the point where we read the seqno we should wait on and the actual wait. And if __wait_seqno then never sees the RESET_IN_PROGRESS state, we'll happily wait for a seqno which will in all likelyhood never signal. In practice this is not a big problem since the X server gets constantly interrupted, and can then submit more work (hopefully) to unblock everyone else: As soon as a new seqno write lands, all waiters will unblock. But running the i-g-t reset testcase ZZ_hangman can expose this race, especially on slower hw with fewer cpu cores. Now looking forward to ARB_robustness and friends that's not the best possible behaviour, hence this patch adds a reset_counter to be able to detect any reset, even if a given thread never observed the in-progress state. The important part is to correctly order things: - The write side needs to increment the counter after any seqno gets reset. Hence we need to do that at the end of the reset work, and again wake everyone up. We also need to place a barrier in between any possible seqno changes and the counter increment, since any unlock operations only guarantee that nothing leaks out, but not that at later load operation gets moved ahead. - On the read side we need to ensure that no reset can sneak in and invalidate the seqno. In all cases we can use the one-sided barrier that unlock operations guarantee (of the lock protecting the respective seqno/ring pair) to ensure correct ordering. Hence it is sufficient to place the atomic read before the mutex/spin_unlock and no additional barriers are required. The end-result of all this is that we need to wake up everyone twice in a reset operation: - First, before the reset starts, to get any lockholders of the locks, so that the reset can proceed. - Second, after the reset is completed, to allow waiters to properly and reliably detect the reset condition and bail out. I admit that this entire reset_counter thing smells a bit like overkill, but I think it's justified since it makes it really explicit what the bail-out condition is. And we need a reset counter anyway to implement ARB_robustness, and imo with finer-grained locking on the horizont this is the most resilient scheme I could think of. v2: Drop spurious change in the wait_for_error EXIT_COND - we only need to wait until we leave the reset-in-progress wedged state. v3: Don't play tricks with barriers in the throttle ioctl, the spin_unlock is barrier enough. I've also considered using a little helper to grab the current reset_counter, but then decided that hiding the atomic_read isn't a great idea, since having it explicitly show up in the code is a nice remainder to reviews to check the memory barriers. v4: Add a comment to explain why we need to fall through in __wait_seqno in the end variable assignments. v5: Review from Damien: - s/smb/smp/ in a comment - don't increment the reset counter after we've set it to WEDGED. Now we (again) properly wedge the gpu when the reset fails. Reviewed-by: Damien Lespiau <damien.lespiau@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-12-06 16:01:42 +08:00
ret = i915_reset(dev);
if (ret == 0) {
/*
* After all the gem state is reset, increment the reset
* counter and wake up everyone waiting for the reset to
* complete.
*
* Since unlock operations are a one-sided barrier only,
* we need to insert a barrier here to order any seqno
* updates before
* the counter increment.
*/
smp_mb__before_atomic_inc();
atomic_inc(&dev_priv->gpu_error.reset_counter);
kobject_uevent_env(&dev->primary->kdev.kobj,
KOBJ_CHANGE, reset_done_event);
drm/i915: clear up wedged transitions We have two important transitions of the wedged state in the current code: - 0 -> 1: This means a hang has been detected, and signals to everyone that they please get of any locks, so that the reset work item can do its job. - 1 -> 0: The reset handler has completed. Now the last transition mixes up two states: "Reset completed and successful" and "Reset failed". To distinguish these two we do some tricks with the reset completion, but I simply could not convince myself that this doesn't race under odd circumstances. Hence split this up, and add a new terminal state indicating that the hw is gone for good. Also add explicit #defines for both states, update comments. v2: Split out the reset handling bugfix for the throttle ioctl. v3: s/tmp/wedged/ sugested by Chris Wilson. Also fixup up a rebase error which prevented this patch from actually compiling. v4: To unify the wedged state with the reset counter, keep the reset-in-progress state just as a flag. The terminally-wedged state is now denoted with a big number. v5: Add a comment to the reset_counter special values explaining that WEDGED & RESET_IN_PROGRESS needs to be true for the code to be correct. v6: Fixup logic errors introduced with the wedged+reset_counter unification. Since WEDGED implies reset-in-progress (in a way we're terminally stuck in the dead-but-reset-not-completed state), we need ensure that we check for this everywhere. The specific bug was in wait_for_error, which would simply have timed out. v7: Extract an inline i915_reset_in_progress helper to make the code more readable. Also annote the reset-in-progress case with an unlikely, to help the compiler optimize the fastpath. Do the same for the terminally wedged case with i915_terminally_wedged. Reviewed-by: Damien Lespiau <damien.lespiau@intel.com> Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-11-16 00:17:22 +08:00
} else {
atomic_set(&error->reset_counter, I915_WEDGED);
}
drm/i915: clear up wedged transitions We have two important transitions of the wedged state in the current code: - 0 -> 1: This means a hang has been detected, and signals to everyone that they please get of any locks, so that the reset work item can do its job. - 1 -> 0: The reset handler has completed. Now the last transition mixes up two states: "Reset completed and successful" and "Reset failed". To distinguish these two we do some tricks with the reset completion, but I simply could not convince myself that this doesn't race under odd circumstances. Hence split this up, and add a new terminal state indicating that the hw is gone for good. Also add explicit #defines for both states, update comments. v2: Split out the reset handling bugfix for the throttle ioctl. v3: s/tmp/wedged/ sugested by Chris Wilson. Also fixup up a rebase error which prevented this patch from actually compiling. v4: To unify the wedged state with the reset counter, keep the reset-in-progress state just as a flag. The terminally-wedged state is now denoted with a big number. v5: Add a comment to the reset_counter special values explaining that WEDGED & RESET_IN_PROGRESS needs to be true for the code to be correct. v6: Fixup logic errors introduced with the wedged+reset_counter unification. Since WEDGED implies reset-in-progress (in a way we're terminally stuck in the dead-but-reset-not-completed state), we need ensure that we check for this everywhere. The specific bug was in wait_for_error, which would simply have timed out. v7: Extract an inline i915_reset_in_progress helper to make the code more readable. Also annote the reset-in-progress case with an unlikely, to help the compiler optimize the fastpath. Do the same for the terminally wedged case with i915_terminally_wedged. Reviewed-by: Damien Lespiau <damien.lespiau@intel.com> Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-11-16 00:17:22 +08:00
drm/i915: create a race-free reset detection With the previous patch the state transition handling of the reset code itself is now (hopefully) race free and solid. But that still leaves out everyone else - with the various lock-free wait paths we have there's the possibility that the reset happens between the point where we read the seqno we should wait on and the actual wait. And if __wait_seqno then never sees the RESET_IN_PROGRESS state, we'll happily wait for a seqno which will in all likelyhood never signal. In practice this is not a big problem since the X server gets constantly interrupted, and can then submit more work (hopefully) to unblock everyone else: As soon as a new seqno write lands, all waiters will unblock. But running the i-g-t reset testcase ZZ_hangman can expose this race, especially on slower hw with fewer cpu cores. Now looking forward to ARB_robustness and friends that's not the best possible behaviour, hence this patch adds a reset_counter to be able to detect any reset, even if a given thread never observed the in-progress state. The important part is to correctly order things: - The write side needs to increment the counter after any seqno gets reset. Hence we need to do that at the end of the reset work, and again wake everyone up. We also need to place a barrier in between any possible seqno changes and the counter increment, since any unlock operations only guarantee that nothing leaks out, but not that at later load operation gets moved ahead. - On the read side we need to ensure that no reset can sneak in and invalidate the seqno. In all cases we can use the one-sided barrier that unlock operations guarantee (of the lock protecting the respective seqno/ring pair) to ensure correct ordering. Hence it is sufficient to place the atomic read before the mutex/spin_unlock and no additional barriers are required. The end-result of all this is that we need to wake up everyone twice in a reset operation: - First, before the reset starts, to get any lockholders of the locks, so that the reset can proceed. - Second, after the reset is completed, to allow waiters to properly and reliably detect the reset condition and bail out. I admit that this entire reset_counter thing smells a bit like overkill, but I think it's justified since it makes it really explicit what the bail-out condition is. And we need a reset counter anyway to implement ARB_robustness, and imo with finer-grained locking on the horizont this is the most resilient scheme I could think of. v2: Drop spurious change in the wait_for_error EXIT_COND - we only need to wait until we leave the reset-in-progress wedged state. v3: Don't play tricks with barriers in the throttle ioctl, the spin_unlock is barrier enough. I've also considered using a little helper to grab the current reset_counter, but then decided that hiding the atomic_read isn't a great idea, since having it explicitly show up in the code is a nice remainder to reviews to check the memory barriers. v4: Add a comment to explain why we need to fall through in __wait_seqno in the end variable assignments. v5: Review from Damien: - s/smb/smp/ in a comment - don't increment the reset counter after we've set it to WEDGED. Now we (again) properly wedge the gpu when the reset fails. Reviewed-by: Damien Lespiau <damien.lespiau@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-12-06 16:01:42 +08:00
for_each_ring(ring, dev_priv, i)
wake_up_all(&ring->irq_queue);
intel_display_handle_reset(dev);
drm/i915: clear up wedged transitions We have two important transitions of the wedged state in the current code: - 0 -> 1: This means a hang has been detected, and signals to everyone that they please get of any locks, so that the reset work item can do its job. - 1 -> 0: The reset handler has completed. Now the last transition mixes up two states: "Reset completed and successful" and "Reset failed". To distinguish these two we do some tricks with the reset completion, but I simply could not convince myself that this doesn't race under odd circumstances. Hence split this up, and add a new terminal state indicating that the hw is gone for good. Also add explicit #defines for both states, update comments. v2: Split out the reset handling bugfix for the throttle ioctl. v3: s/tmp/wedged/ sugested by Chris Wilson. Also fixup up a rebase error which prevented this patch from actually compiling. v4: To unify the wedged state with the reset counter, keep the reset-in-progress state just as a flag. The terminally-wedged state is now denoted with a big number. v5: Add a comment to the reset_counter special values explaining that WEDGED & RESET_IN_PROGRESS needs to be true for the code to be correct. v6: Fixup logic errors introduced with the wedged+reset_counter unification. Since WEDGED implies reset-in-progress (in a way we're terminally stuck in the dead-but-reset-not-completed state), we need ensure that we check for this everywhere. The specific bug was in wait_for_error, which would simply have timed out. v7: Extract an inline i915_reset_in_progress helper to make the code more readable. Also annote the reset-in-progress case with an unlikely, to help the compiler optimize the fastpath. Do the same for the terminally wedged case with i915_terminally_wedged. Reviewed-by: Damien Lespiau <damien.lespiau@intel.com> Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-11-16 00:17:22 +08:00
wake_up_all(&dev_priv->gpu_error.reset_queue);
}
}
/* NB: please notice the memset */
static void i915_get_extra_instdone(struct drm_device *dev,
uint32_t *instdone)
{
struct drm_i915_private *dev_priv = dev->dev_private;
memset(instdone, 0, sizeof(*instdone) * I915_NUM_INSTDONE_REG);
switch(INTEL_INFO(dev)->gen) {
case 2:
case 3:
instdone[0] = I915_READ(INSTDONE);
break;
case 4:
case 5:
case 6:
instdone[0] = I915_READ(INSTDONE_I965);
instdone[1] = I915_READ(INSTDONE1);
break;
default:
WARN_ONCE(1, "Unsupported platform\n");
case 7:
instdone[0] = I915_READ(GEN7_INSTDONE_1);
instdone[1] = I915_READ(GEN7_SC_INSTDONE);
instdone[2] = I915_READ(GEN7_SAMPLER_INSTDONE);
instdone[3] = I915_READ(GEN7_ROW_INSTDONE);
break;
}
}
#ifdef CONFIG_DEBUG_FS
static struct drm_i915_error_object *
i915_error_object_create_sized(struct drm_i915_private *dev_priv,
struct drm_i915_gem_object *src,
const int num_pages)
{
struct drm_i915_error_object *dst;
int i;
u32 reloc_offset;
if (src == NULL || src->pages == NULL)
return NULL;
dst = kmalloc(sizeof(*dst) + num_pages * sizeof(u32 *), GFP_ATOMIC);
if (dst == NULL)
return NULL;
reloc_offset = src->gtt_offset;
for (i = 0; i < num_pages; i++) {
unsigned long flags;
void *d;
d = kmalloc(PAGE_SIZE, GFP_ATOMIC);
if (d == NULL)
goto unwind;
local_irq_save(flags);
if (reloc_offset < dev_priv->gtt.mappable_end &&
src->has_global_gtt_mapping) {
void __iomem *s;
/* Simply ignore tiling or any overlapping fence.
* It's part of the error state, and this hopefully
* captures what the GPU read.
*/
s = io_mapping_map_atomic_wc(dev_priv->gtt.mappable,
reloc_offset);
memcpy_fromio(d, s, PAGE_SIZE);
io_mapping_unmap_atomic(s);
} else if (src->stolen) {
unsigned long offset;
offset = dev_priv->mm.stolen_base;
offset += src->stolen->start;
offset += i << PAGE_SHIFT;
memcpy_fromio(d, (void __iomem *) offset, PAGE_SIZE);
} else {
struct page *page;
void *s;
page = i915_gem_object_get_page(src, i);
drm_clflush_pages(&page, 1);
s = kmap_atomic(page);
memcpy(d, s, PAGE_SIZE);
kunmap_atomic(s);
drm_clflush_pages(&page, 1);
}
local_irq_restore(flags);
dst->pages[i] = d;
reloc_offset += PAGE_SIZE;
}
dst->page_count = num_pages;
dst->gtt_offset = src->gtt_offset;
return dst;
unwind:
while (i--)
kfree(dst->pages[i]);
kfree(dst);
return NULL;
}
#define i915_error_object_create(dev_priv, src) \
i915_error_object_create_sized((dev_priv), (src), \
(src)->base.size>>PAGE_SHIFT)
static void
i915_error_object_free(struct drm_i915_error_object *obj)
{
int page;
if (obj == NULL)
return;
for (page = 0; page < obj->page_count; page++)
kfree(obj->pages[page]);
kfree(obj);
}
void
i915_error_state_free(struct kref *error_ref)
{
struct drm_i915_error_state *error = container_of(error_ref,
typeof(*error), ref);
int i;
for (i = 0; i < ARRAY_SIZE(error->ring); i++) {
i915_error_object_free(error->ring[i].batchbuffer);
i915_error_object_free(error->ring[i].ringbuffer);
kfree(error->ring[i].requests);
}
kfree(error->active_bo);
kfree(error->overlay);
kfree(error);
}
static void capture_bo(struct drm_i915_error_buffer *err,
struct drm_i915_gem_object *obj)
{
err->size = obj->base.size;
err->name = obj->base.name;
err->rseqno = obj->last_read_seqno;
err->wseqno = obj->last_write_seqno;
err->gtt_offset = obj->gtt_offset;
err->read_domains = obj->base.read_domains;
err->write_domain = obj->base.write_domain;
err->fence_reg = obj->fence_reg;
err->pinned = 0;
if (obj->pin_count > 0)
err->pinned = 1;
if (obj->user_pin_count > 0)
err->pinned = -1;
err->tiling = obj->tiling_mode;
err->dirty = obj->dirty;
err->purgeable = obj->madv != I915_MADV_WILLNEED;
err->ring = obj->ring ? obj->ring->id : -1;
err->cache_level = obj->cache_level;
}
static u32 capture_active_bo(struct drm_i915_error_buffer *err,
int count, struct list_head *head)
{
struct drm_i915_gem_object *obj;
int i = 0;
list_for_each_entry(obj, head, mm_list) {
capture_bo(err++, obj);
if (++i == count)
break;
}
return i;
}
static u32 capture_pinned_bo(struct drm_i915_error_buffer *err,
int count, struct list_head *head)
{
struct drm_i915_gem_object *obj;
int i = 0;
list_for_each_entry(obj, head, gtt_list) {
if (obj->pin_count == 0)
continue;
capture_bo(err++, obj);
if (++i == count)
break;
}
return i;
}
static void i915_gem_record_fences(struct drm_device *dev,
struct drm_i915_error_state *error)
{
struct drm_i915_private *dev_priv = dev->dev_private;
int i;
/* Fences */
switch (INTEL_INFO(dev)->gen) {
case 7:
case 6:
for (i = 0; i < 16; i++)
error->fence[i] = I915_READ64(FENCE_REG_SANDYBRIDGE_0 + (i * 8));
break;
case 5:
case 4:
for (i = 0; i < 16; i++)
error->fence[i] = I915_READ64(FENCE_REG_965_0 + (i * 8));
break;
case 3:
if (IS_I945G(dev) || IS_I945GM(dev) || IS_G33(dev))
for (i = 0; i < 8; i++)
error->fence[i+8] = I915_READ(FENCE_REG_945_8 + (i * 4));
case 2:
for (i = 0; i < 8; i++)
error->fence[i] = I915_READ(FENCE_REG_830_0 + (i * 4));
break;
default:
BUG();
}
}
static struct drm_i915_error_object *
i915_error_first_batchbuffer(struct drm_i915_private *dev_priv,
struct intel_ring_buffer *ring)
{
struct drm_i915_gem_object *obj;
u32 seqno;
if (!ring->get_seqno)
return NULL;
if (HAS_BROKEN_CS_TLB(dev_priv->dev)) {
u32 acthd = I915_READ(ACTHD);
if (WARN_ON(ring->id != RCS))
return NULL;
obj = ring->private;
if (acthd >= obj->gtt_offset &&
acthd < obj->gtt_offset + obj->base.size)
return i915_error_object_create(dev_priv, obj);
}
seqno = ring->get_seqno(ring, false);
list_for_each_entry(obj, &dev_priv->mm.active_list, mm_list) {
if (obj->ring != ring)
continue;
if (i915_seqno_passed(seqno, obj->last_read_seqno))
continue;
if ((obj->base.read_domains & I915_GEM_DOMAIN_COMMAND) == 0)
continue;
/* We need to copy these to an anonymous buffer as the simplest
* method to avoid being overwritten by userspace.
*/
return i915_error_object_create(dev_priv, obj);
}
return NULL;
}
static void i915_record_ring_state(struct drm_device *dev,
struct drm_i915_error_state *error,
struct intel_ring_buffer *ring)
{
struct drm_i915_private *dev_priv = dev->dev_private;
if (INTEL_INFO(dev)->gen >= 6) {
error->rc_psmi[ring->id] = I915_READ(ring->mmio_base + 0x50);
error->fault_reg[ring->id] = I915_READ(RING_FAULT_REG(ring));
error->semaphore_mboxes[ring->id][0]
= I915_READ(RING_SYNC_0(ring->mmio_base));
error->semaphore_mboxes[ring->id][1]
= I915_READ(RING_SYNC_1(ring->mmio_base));
error->semaphore_seqno[ring->id][0] = ring->sync_seqno[0];
error->semaphore_seqno[ring->id][1] = ring->sync_seqno[1];
}
if (INTEL_INFO(dev)->gen >= 4) {
error->faddr[ring->id] = I915_READ(RING_DMA_FADD(ring->mmio_base));
error->ipeir[ring->id] = I915_READ(RING_IPEIR(ring->mmio_base));
error->ipehr[ring->id] = I915_READ(RING_IPEHR(ring->mmio_base));
error->instdone[ring->id] = I915_READ(RING_INSTDONE(ring->mmio_base));
error->instps[ring->id] = I915_READ(RING_INSTPS(ring->mmio_base));
if (ring->id == RCS)
error->bbaddr = I915_READ64(BB_ADDR);
} else {
error->faddr[ring->id] = I915_READ(DMA_FADD_I8XX);
error->ipeir[ring->id] = I915_READ(IPEIR);
error->ipehr[ring->id] = I915_READ(IPEHR);
error->instdone[ring->id] = I915_READ(INSTDONE);
}
error->waiting[ring->id] = waitqueue_active(&ring->irq_queue);
error->instpm[ring->id] = I915_READ(RING_INSTPM(ring->mmio_base));
error->seqno[ring->id] = ring->get_seqno(ring, false);
error->acthd[ring->id] = intel_ring_get_active_head(ring);
error->head[ring->id] = I915_READ_HEAD(ring);
error->tail[ring->id] = I915_READ_TAIL(ring);
error->ctl[ring->id] = I915_READ_CTL(ring);
error->cpu_ring_head[ring->id] = ring->head;
error->cpu_ring_tail[ring->id] = ring->tail;
}
static void i915_gem_record_rings(struct drm_device *dev,
struct drm_i915_error_state *error)
{
struct drm_i915_private *dev_priv = dev->dev_private;
struct intel_ring_buffer *ring;
struct drm_i915_gem_request *request;
int i, count;
for_each_ring(ring, dev_priv, i) {
i915_record_ring_state(dev, error, ring);
error->ring[i].batchbuffer =
i915_error_first_batchbuffer(dev_priv, ring);
error->ring[i].ringbuffer =
i915_error_object_create(dev_priv, ring->obj);
count = 0;
list_for_each_entry(request, &ring->request_list, list)
count++;
error->ring[i].num_requests = count;
error->ring[i].requests =
kmalloc(count*sizeof(struct drm_i915_error_request),
GFP_ATOMIC);
if (error->ring[i].requests == NULL) {
error->ring[i].num_requests = 0;
continue;
}
count = 0;
list_for_each_entry(request, &ring->request_list, list) {
struct drm_i915_error_request *erq;
erq = &error->ring[i].requests[count++];
erq->seqno = request->seqno;
erq->jiffies = request->emitted_jiffies;
erq->tail = request->tail;
}
}
}
/**
* i915_capture_error_state - capture an error record for later analysis
* @dev: drm device
*
* Should be called when an error is detected (either a hang or an error
* interrupt) to capture error state from the time of the error. Fills
* out a structure which becomes available in debugfs for user level tools
* to pick up.
*/
static void i915_capture_error_state(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
struct drm_i915_gem_object *obj;
struct drm_i915_error_state *error;
unsigned long flags;
int i, pipe;
spin_lock_irqsave(&dev_priv->gpu_error.lock, flags);
error = dev_priv->gpu_error.first_error;
spin_unlock_irqrestore(&dev_priv->gpu_error.lock, flags);
if (error)
return;
/* Account for pipe specific data like PIPE*STAT */
error = kzalloc(sizeof(*error), GFP_ATOMIC);
if (!error) {
DRM_DEBUG_DRIVER("out of memory, not capturing error state\n");
return;
}
DRM_INFO("capturing error event; look for more information in"
"/sys/kernel/debug/dri/%d/i915_error_state\n",
dev->primary->index);
kref_init(&error->ref);
error->eir = I915_READ(EIR);
error->pgtbl_er = I915_READ(PGTBL_ER);
error->ccid = I915_READ(CCID);
if (HAS_PCH_SPLIT(dev))
error->ier = I915_READ(DEIER) | I915_READ(GTIER);
else if (IS_VALLEYVIEW(dev))
error->ier = I915_READ(GTIER) | I915_READ(VLV_IER);
else if (IS_GEN2(dev))
error->ier = I915_READ16(IER);
else
error->ier = I915_READ(IER);
if (INTEL_INFO(dev)->gen >= 6)
error->derrmr = I915_READ(DERRMR);
if (IS_VALLEYVIEW(dev))
error->forcewake = I915_READ(FORCEWAKE_VLV);
else if (INTEL_INFO(dev)->gen >= 7)
error->forcewake = I915_READ(FORCEWAKE_MT);
else if (INTEL_INFO(dev)->gen == 6)
error->forcewake = I915_READ(FORCEWAKE);
for_each_pipe(pipe)
error->pipestat[pipe] = I915_READ(PIPESTAT(pipe));
if (INTEL_INFO(dev)->gen >= 6) {
error->error = I915_READ(ERROR_GEN6);
error->done_reg = I915_READ(DONE_REG);
}
if (INTEL_INFO(dev)->gen == 7)
error->err_int = I915_READ(GEN7_ERR_INT);
i915_get_extra_instdone(dev, error->extra_instdone);
i915_gem_record_fences(dev, error);
i915_gem_record_rings(dev, error);
/* Record buffers on the active and pinned lists. */
error->active_bo = NULL;
error->pinned_bo = NULL;
i = 0;
list_for_each_entry(obj, &dev_priv->mm.active_list, mm_list)
i++;
error->active_bo_count = i;
drm/i915: Track unbound pages When dealing with a working set larger than the GATT, or even the mappable aperture when touching through the GTT, we end up with evicting objects only to rebind them at a new offset again later. Moving an object into and out of the GTT requires clflushing the pages, thus causing a double-clflush penalty for rebinding. To avoid having to clflush on rebinding, we can track the pages as they are evicted from the GTT and only relinquish those pages on memory pressure. As usual, if it were not for the handling of out-of-memory condition and having to manually shrink our own bo caches, it would be a net reduction of code. Alas. Note: The patch also contains a few changes to the last-hope evict_everything logic in i916_gem_execbuffer.c - we no longer try to only evict the purgeable stuff in a first try (since that's superflous and only helps in OOM corner-cases, not fragmented-gtt trashing situations). Also, the extraction of the get_pages retry loop from bind_to_gtt (and other callsites) to get_pages should imo have been a separate patch. v2: Ditch the newly added put_pages (for unbound objects only) in i915_gem_reset. A quick irc discussion hasn't revealed any important reason for this, so if we need this, I'd like to have a git blame'able explanation for it. v3: Undo the s/drm_malloc_ab/kmalloc/ in get_pages that Chris noticed. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> [danvet: Split out code movements and rant a bit in the commit message with a few Notes. Done v2] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-08-20 17:40:46 +08:00
list_for_each_entry(obj, &dev_priv->mm.bound_list, gtt_list)
if (obj->pin_count)
i++;
error->pinned_bo_count = i - error->active_bo_count;
error->active_bo = NULL;
error->pinned_bo = NULL;
if (i) {
error->active_bo = kmalloc(sizeof(*error->active_bo)*i,
GFP_ATOMIC);
if (error->active_bo)
error->pinned_bo =
error->active_bo + error->active_bo_count;
}
if (error->active_bo)
error->active_bo_count =
capture_active_bo(error->active_bo,
error->active_bo_count,
&dev_priv->mm.active_list);
if (error->pinned_bo)
error->pinned_bo_count =
capture_pinned_bo(error->pinned_bo,
error->pinned_bo_count,
drm/i915: Track unbound pages When dealing with a working set larger than the GATT, or even the mappable aperture when touching through the GTT, we end up with evicting objects only to rebind them at a new offset again later. Moving an object into and out of the GTT requires clflushing the pages, thus causing a double-clflush penalty for rebinding. To avoid having to clflush on rebinding, we can track the pages as they are evicted from the GTT and only relinquish those pages on memory pressure. As usual, if it were not for the handling of out-of-memory condition and having to manually shrink our own bo caches, it would be a net reduction of code. Alas. Note: The patch also contains a few changes to the last-hope evict_everything logic in i916_gem_execbuffer.c - we no longer try to only evict the purgeable stuff in a first try (since that's superflous and only helps in OOM corner-cases, not fragmented-gtt trashing situations). Also, the extraction of the get_pages retry loop from bind_to_gtt (and other callsites) to get_pages should imo have been a separate patch. v2: Ditch the newly added put_pages (for unbound objects only) in i915_gem_reset. A quick irc discussion hasn't revealed any important reason for this, so if we need this, I'd like to have a git blame'able explanation for it. v3: Undo the s/drm_malloc_ab/kmalloc/ in get_pages that Chris noticed. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> [danvet: Split out code movements and rant a bit in the commit message with a few Notes. Done v2] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-08-20 17:40:46 +08:00
&dev_priv->mm.bound_list);
do_gettimeofday(&error->time);
error->overlay = intel_overlay_capture_error_state(dev);
error->display = intel_display_capture_error_state(dev);
spin_lock_irqsave(&dev_priv->gpu_error.lock, flags);
if (dev_priv->gpu_error.first_error == NULL) {
dev_priv->gpu_error.first_error = error;
error = NULL;
}
spin_unlock_irqrestore(&dev_priv->gpu_error.lock, flags);
if (error)
i915_error_state_free(&error->ref);
}
void i915_destroy_error_state(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
struct drm_i915_error_state *error;
unsigned long flags;
spin_lock_irqsave(&dev_priv->gpu_error.lock, flags);
error = dev_priv->gpu_error.first_error;
dev_priv->gpu_error.first_error = NULL;
spin_unlock_irqrestore(&dev_priv->gpu_error.lock, flags);
if (error)
kref_put(&error->ref, i915_error_state_free);
}
#else
#define i915_capture_error_state(x)
#endif
static void i915_report_and_clear_eir(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
uint32_t instdone[I915_NUM_INSTDONE_REG];
u32 eir = I915_READ(EIR);
int pipe, i;
if (!eir)
return;
pr_err("render error detected, EIR: 0x%08x\n", eir);
i915_get_extra_instdone(dev, instdone);
if (IS_G4X(dev)) {
if (eir & (GM45_ERROR_MEM_PRIV | GM45_ERROR_CP_PRIV)) {
u32 ipeir = I915_READ(IPEIR_I965);
pr_err(" IPEIR: 0x%08x\n", I915_READ(IPEIR_I965));
pr_err(" IPEHR: 0x%08x\n", I915_READ(IPEHR_I965));
for (i = 0; i < ARRAY_SIZE(instdone); i++)
pr_err(" INSTDONE_%d: 0x%08x\n", i, instdone[i]);
pr_err(" INSTPS: 0x%08x\n", I915_READ(INSTPS));
pr_err(" ACTHD: 0x%08x\n", I915_READ(ACTHD_I965));
I915_WRITE(IPEIR_I965, ipeir);
POSTING_READ(IPEIR_I965);
}
if (eir & GM45_ERROR_PAGE_TABLE) {
u32 pgtbl_err = I915_READ(PGTBL_ER);
pr_err("page table error\n");
pr_err(" PGTBL_ER: 0x%08x\n", pgtbl_err);
I915_WRITE(PGTBL_ER, pgtbl_err);
POSTING_READ(PGTBL_ER);
}
}
if (!IS_GEN2(dev)) {
if (eir & I915_ERROR_PAGE_TABLE) {
u32 pgtbl_err = I915_READ(PGTBL_ER);
pr_err("page table error\n");
pr_err(" PGTBL_ER: 0x%08x\n", pgtbl_err);
I915_WRITE(PGTBL_ER, pgtbl_err);
POSTING_READ(PGTBL_ER);
}
}
if (eir & I915_ERROR_MEMORY_REFRESH) {
pr_err("memory refresh error:\n");
for_each_pipe(pipe)
pr_err("pipe %c stat: 0x%08x\n",
pipe_name(pipe), I915_READ(PIPESTAT(pipe)));
/* pipestat has already been acked */
}
if (eir & I915_ERROR_INSTRUCTION) {
pr_err("instruction error\n");
pr_err(" INSTPM: 0x%08x\n", I915_READ(INSTPM));
for (i = 0; i < ARRAY_SIZE(instdone); i++)
pr_err(" INSTDONE_%d: 0x%08x\n", i, instdone[i]);
if (INTEL_INFO(dev)->gen < 4) {
u32 ipeir = I915_READ(IPEIR);
pr_err(" IPEIR: 0x%08x\n", I915_READ(IPEIR));
pr_err(" IPEHR: 0x%08x\n", I915_READ(IPEHR));
pr_err(" ACTHD: 0x%08x\n", I915_READ(ACTHD));
I915_WRITE(IPEIR, ipeir);
POSTING_READ(IPEIR);
} else {
u32 ipeir = I915_READ(IPEIR_I965);
pr_err(" IPEIR: 0x%08x\n", I915_READ(IPEIR_I965));
pr_err(" IPEHR: 0x%08x\n", I915_READ(IPEHR_I965));
pr_err(" INSTPS: 0x%08x\n", I915_READ(INSTPS));
pr_err(" ACTHD: 0x%08x\n", I915_READ(ACTHD_I965));
I915_WRITE(IPEIR_I965, ipeir);
POSTING_READ(IPEIR_I965);
}
}
I915_WRITE(EIR, eir);
POSTING_READ(EIR);
eir = I915_READ(EIR);
if (eir) {
/*
* some errors might have become stuck,
* mask them.
*/
DRM_ERROR("EIR stuck: 0x%08x, masking\n", eir);
I915_WRITE(EMR, I915_READ(EMR) | eir);
I915_WRITE(IIR, I915_RENDER_COMMAND_PARSER_ERROR_INTERRUPT);
}
}
/**
* i915_handle_error - handle an error interrupt
* @dev: drm device
*
* Do some basic checking of regsiter state at error interrupt time and
* dump it to the syslog. Also call i915_capture_error_state() to make
* sure we get a record and make it available in debugfs. Fire a uevent
* so userspace knows something bad happened (should trigger collection
* of a ring dump etc.).
*/
void i915_handle_error(struct drm_device *dev, bool wedged)
{
struct drm_i915_private *dev_priv = dev->dev_private;
struct intel_ring_buffer *ring;
int i;
i915_capture_error_state(dev);
i915_report_and_clear_eir(dev);
if (wedged) {
drm/i915: create a race-free reset detection With the previous patch the state transition handling of the reset code itself is now (hopefully) race free and solid. But that still leaves out everyone else - with the various lock-free wait paths we have there's the possibility that the reset happens between the point where we read the seqno we should wait on and the actual wait. And if __wait_seqno then never sees the RESET_IN_PROGRESS state, we'll happily wait for a seqno which will in all likelyhood never signal. In practice this is not a big problem since the X server gets constantly interrupted, and can then submit more work (hopefully) to unblock everyone else: As soon as a new seqno write lands, all waiters will unblock. But running the i-g-t reset testcase ZZ_hangman can expose this race, especially on slower hw with fewer cpu cores. Now looking forward to ARB_robustness and friends that's not the best possible behaviour, hence this patch adds a reset_counter to be able to detect any reset, even if a given thread never observed the in-progress state. The important part is to correctly order things: - The write side needs to increment the counter after any seqno gets reset. Hence we need to do that at the end of the reset work, and again wake everyone up. We also need to place a barrier in between any possible seqno changes and the counter increment, since any unlock operations only guarantee that nothing leaks out, but not that at later load operation gets moved ahead. - On the read side we need to ensure that no reset can sneak in and invalidate the seqno. In all cases we can use the one-sided barrier that unlock operations guarantee (of the lock protecting the respective seqno/ring pair) to ensure correct ordering. Hence it is sufficient to place the atomic read before the mutex/spin_unlock and no additional barriers are required. The end-result of all this is that we need to wake up everyone twice in a reset operation: - First, before the reset starts, to get any lockholders of the locks, so that the reset can proceed. - Second, after the reset is completed, to allow waiters to properly and reliably detect the reset condition and bail out. I admit that this entire reset_counter thing smells a bit like overkill, but I think it's justified since it makes it really explicit what the bail-out condition is. And we need a reset counter anyway to implement ARB_robustness, and imo with finer-grained locking on the horizont this is the most resilient scheme I could think of. v2: Drop spurious change in the wait_for_error EXIT_COND - we only need to wait until we leave the reset-in-progress wedged state. v3: Don't play tricks with barriers in the throttle ioctl, the spin_unlock is barrier enough. I've also considered using a little helper to grab the current reset_counter, but then decided that hiding the atomic_read isn't a great idea, since having it explicitly show up in the code is a nice remainder to reviews to check the memory barriers. v4: Add a comment to explain why we need to fall through in __wait_seqno in the end variable assignments. v5: Review from Damien: - s/smb/smp/ in a comment - don't increment the reset counter after we've set it to WEDGED. Now we (again) properly wedge the gpu when the reset fails. Reviewed-by: Damien Lespiau <damien.lespiau@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-12-06 16:01:42 +08:00
atomic_set_mask(I915_RESET_IN_PROGRESS_FLAG,
&dev_priv->gpu_error.reset_counter);
/*
drm/i915: clear up wedged transitions We have two important transitions of the wedged state in the current code: - 0 -> 1: This means a hang has been detected, and signals to everyone that they please get of any locks, so that the reset work item can do its job. - 1 -> 0: The reset handler has completed. Now the last transition mixes up two states: "Reset completed and successful" and "Reset failed". To distinguish these two we do some tricks with the reset completion, but I simply could not convince myself that this doesn't race under odd circumstances. Hence split this up, and add a new terminal state indicating that the hw is gone for good. Also add explicit #defines for both states, update comments. v2: Split out the reset handling bugfix for the throttle ioctl. v3: s/tmp/wedged/ sugested by Chris Wilson. Also fixup up a rebase error which prevented this patch from actually compiling. v4: To unify the wedged state with the reset counter, keep the reset-in-progress state just as a flag. The terminally-wedged state is now denoted with a big number. v5: Add a comment to the reset_counter special values explaining that WEDGED & RESET_IN_PROGRESS needs to be true for the code to be correct. v6: Fixup logic errors introduced with the wedged+reset_counter unification. Since WEDGED implies reset-in-progress (in a way we're terminally stuck in the dead-but-reset-not-completed state), we need ensure that we check for this everywhere. The specific bug was in wait_for_error, which would simply have timed out. v7: Extract an inline i915_reset_in_progress helper to make the code more readable. Also annote the reset-in-progress case with an unlikely, to help the compiler optimize the fastpath. Do the same for the terminally wedged case with i915_terminally_wedged. Reviewed-by: Damien Lespiau <damien.lespiau@intel.com> Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-11-16 00:17:22 +08:00
* Wakeup waiting processes so that the reset work item
* doesn't deadlock trying to grab various locks.
*/
for_each_ring(ring, dev_priv, i)
wake_up_all(&ring->irq_queue);
}
queue_work(dev_priv->wq, &dev_priv->gpu_error.work);
}
static void __always_unused i915_pageflip_stall_check(struct drm_device *dev, int pipe)
{
drm_i915_private_t *dev_priv = dev->dev_private;
struct drm_crtc *crtc = dev_priv->pipe_to_crtc_mapping[pipe];
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
struct drm_i915_gem_object *obj;
struct intel_unpin_work *work;
unsigned long flags;
bool stall_detected;
/* Ignore early vblank irqs */
if (intel_crtc == NULL)
return;
spin_lock_irqsave(&dev->event_lock, flags);
work = intel_crtc->unpin_work;
if (work == NULL ||
atomic_read(&work->pending) >= INTEL_FLIP_COMPLETE ||
!work->enable_stall_check) {
/* Either the pending flip IRQ arrived, or we're too early. Don't check */
spin_unlock_irqrestore(&dev->event_lock, flags);
return;
}
/* Potential stall - if we see that the flip has happened, assume a missed interrupt */
obj = work->pending_flip_obj;
if (INTEL_INFO(dev)->gen >= 4) {
int dspsurf = DSPSURF(intel_crtc->plane);
stall_detected = I915_HI_DISPBASE(I915_READ(dspsurf)) ==
obj->gtt_offset;
} else {
int dspaddr = DSPADDR(intel_crtc->plane);
stall_detected = I915_READ(dspaddr) == (obj->gtt_offset +
crtc->y * crtc->fb->pitches[0] +
crtc->x * crtc->fb->bits_per_pixel/8);
}
spin_unlock_irqrestore(&dev->event_lock, flags);
if (stall_detected) {
DRM_DEBUG_DRIVER("Pageflip stall detected\n");
intel_prepare_page_flip(dev, intel_crtc->plane);
}
}
/* Called from drm generic code, passed 'crtc' which
* we use as a pipe index
*/
static int i915_enable_vblank(struct drm_device *dev, int pipe)
{
drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
unsigned long irqflags;
if (!i915_pipe_enabled(dev, pipe))
return -EINVAL;
spin_lock_irqsave(&dev_priv->irq_lock, irqflags);
if (INTEL_INFO(dev)->gen >= 4)
i915_enable_pipestat(dev_priv, pipe,
PIPE_START_VBLANK_INTERRUPT_ENABLE);
else
i915_enable_pipestat(dev_priv, pipe,
PIPE_VBLANK_INTERRUPT_ENABLE);
/* maintain vblank delivery even in deep C-states */
if (dev_priv->info->gen == 3)
I915_WRITE(INSTPM, _MASKED_BIT_DISABLE(INSTPM_AGPBUSY_DIS));
spin_unlock_irqrestore(&dev_priv->irq_lock, irqflags);
return 0;
}
static int ironlake_enable_vblank(struct drm_device *dev, int pipe)
{
drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
unsigned long irqflags;
if (!i915_pipe_enabled(dev, pipe))
return -EINVAL;
spin_lock_irqsave(&dev_priv->irq_lock, irqflags);
ironlake_enable_display_irq(dev_priv, (pipe == 0) ?
DE_PIPEA_VBLANK : DE_PIPEB_VBLANK);
spin_unlock_irqrestore(&dev_priv->irq_lock, irqflags);
return 0;
}
static int ivybridge_enable_vblank(struct drm_device *dev, int pipe)
{
drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
unsigned long irqflags;
if (!i915_pipe_enabled(dev, pipe))
return -EINVAL;
spin_lock_irqsave(&dev_priv->irq_lock, irqflags);
ironlake_enable_display_irq(dev_priv,
DE_PIPEA_VBLANK_IVB << (5 * pipe));
spin_unlock_irqrestore(&dev_priv->irq_lock, irqflags);
return 0;
}
static int valleyview_enable_vblank(struct drm_device *dev, int pipe)
{
drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
unsigned long irqflags;
u32 imr;
if (!i915_pipe_enabled(dev, pipe))
return -EINVAL;
spin_lock_irqsave(&dev_priv->irq_lock, irqflags);
imr = I915_READ(VLV_IMR);
if (pipe == 0)
imr &= ~I915_DISPLAY_PIPE_A_VBLANK_INTERRUPT;
else
imr &= ~I915_DISPLAY_PIPE_B_VBLANK_INTERRUPT;
I915_WRITE(VLV_IMR, imr);
i915_enable_pipestat(dev_priv, pipe,
PIPE_START_VBLANK_INTERRUPT_ENABLE);
spin_unlock_irqrestore(&dev_priv->irq_lock, irqflags);
return 0;
}
/* Called from drm generic code, passed 'crtc' which
* we use as a pipe index
*/
static void i915_disable_vblank(struct drm_device *dev, int pipe)
{
drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
unsigned long irqflags;
spin_lock_irqsave(&dev_priv->irq_lock, irqflags);
if (dev_priv->info->gen == 3)
I915_WRITE(INSTPM, _MASKED_BIT_ENABLE(INSTPM_AGPBUSY_DIS));
i915_disable_pipestat(dev_priv, pipe,
PIPE_VBLANK_INTERRUPT_ENABLE |
PIPE_START_VBLANK_INTERRUPT_ENABLE);
spin_unlock_irqrestore(&dev_priv->irq_lock, irqflags);
}
static void ironlake_disable_vblank(struct drm_device *dev, int pipe)
{
drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
unsigned long irqflags;
spin_lock_irqsave(&dev_priv->irq_lock, irqflags);
ironlake_disable_display_irq(dev_priv, (pipe == 0) ?
DE_PIPEA_VBLANK : DE_PIPEB_VBLANK);
spin_unlock_irqrestore(&dev_priv->irq_lock, irqflags);
}
static void ivybridge_disable_vblank(struct drm_device *dev, int pipe)
{
drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
unsigned long irqflags;
spin_lock_irqsave(&dev_priv->irq_lock, irqflags);
ironlake_disable_display_irq(dev_priv,
DE_PIPEA_VBLANK_IVB << (pipe * 5));
spin_unlock_irqrestore(&dev_priv->irq_lock, irqflags);
}
static void valleyview_disable_vblank(struct drm_device *dev, int pipe)
{
drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
unsigned long irqflags;
u32 imr;
spin_lock_irqsave(&dev_priv->irq_lock, irqflags);
i915_disable_pipestat(dev_priv, pipe,
PIPE_START_VBLANK_INTERRUPT_ENABLE);
imr = I915_READ(VLV_IMR);
if (pipe == 0)
imr |= I915_DISPLAY_PIPE_A_VBLANK_INTERRUPT;
else
imr |= I915_DISPLAY_PIPE_B_VBLANK_INTERRUPT;
I915_WRITE(VLV_IMR, imr);
spin_unlock_irqrestore(&dev_priv->irq_lock, irqflags);
}
static u32
ring_last_seqno(struct intel_ring_buffer *ring)
{
return list_entry(ring->request_list.prev,
struct drm_i915_gem_request, list)->seqno;
}
static bool i915_hangcheck_ring_idle(struct intel_ring_buffer *ring, bool *err)
{
if (list_empty(&ring->request_list) ||
i915_seqno_passed(ring->get_seqno(ring, false),
ring_last_seqno(ring))) {
/* Issue a wake-up to catch stuck h/w. */
if (waitqueue_active(&ring->irq_queue)) {
DRM_ERROR("Hangcheck timer elapsed... %s idle\n",
ring->name);
wake_up_all(&ring->irq_queue);
*err = true;
}
return true;
}
return false;
}
static bool kick_ring(struct intel_ring_buffer *ring)
{
struct drm_device *dev = ring->dev;
struct drm_i915_private *dev_priv = dev->dev_private;
u32 tmp = I915_READ_CTL(ring);
if (tmp & RING_WAIT) {
DRM_ERROR("Kicking stuck wait on %s\n",
ring->name);
I915_WRITE_CTL(ring, tmp);
return true;
}
return false;
}
static bool i915_hangcheck_hung(struct drm_device *dev)
{
drm_i915_private_t *dev_priv = dev->dev_private;
if (dev_priv->gpu_error.hangcheck_count++ > 1) {
bool hung = true;
DRM_ERROR("Hangcheck timer elapsed... GPU hung\n");
i915_handle_error(dev, true);
if (!IS_GEN2(dev)) {
struct intel_ring_buffer *ring;
int i;
/* Is the chip hanging on a WAIT_FOR_EVENT?
* If so we can simply poke the RB_WAIT bit
* and break the hang. This should work on
* all but the second generation chipsets.
*/
for_each_ring(ring, dev_priv, i)
hung &= !kick_ring(ring);
}
return hung;
}
return false;
}
/**
* This is called when the chip hasn't reported back with completed
* batchbuffers in a long time. The first time this is called we simply record
* ACTHD. If ACTHD hasn't changed by the time the hangcheck timer elapses
* again, we assume the chip is wedged and try to fix it.
*/
void i915_hangcheck_elapsed(unsigned long data)
{
struct drm_device *dev = (struct drm_device *)data;
drm_i915_private_t *dev_priv = dev->dev_private;
uint32_t acthd[I915_NUM_RINGS], instdone[I915_NUM_INSTDONE_REG];
struct intel_ring_buffer *ring;
bool err = false, idle;
int i;
if (!i915_enable_hangcheck)
return;
memset(acthd, 0, sizeof(acthd));
idle = true;
for_each_ring(ring, dev_priv, i) {
idle &= i915_hangcheck_ring_idle(ring, &err);
acthd[i] = intel_ring_get_active_head(ring);
}
/* If all work is done then ACTHD clearly hasn't advanced. */
if (idle) {
if (err) {
if (i915_hangcheck_hung(dev))
return;
goto repeat;
}
dev_priv->gpu_error.hangcheck_count = 0;
return;
}
i915_get_extra_instdone(dev, instdone);
if (memcmp(dev_priv->gpu_error.last_acthd, acthd,
sizeof(acthd)) == 0 &&
memcmp(dev_priv->gpu_error.prev_instdone, instdone,
sizeof(instdone)) == 0) {
if (i915_hangcheck_hung(dev))
return;
} else {
dev_priv->gpu_error.hangcheck_count = 0;
memcpy(dev_priv->gpu_error.last_acthd, acthd,
sizeof(acthd));
memcpy(dev_priv->gpu_error.prev_instdone, instdone,
sizeof(instdone));
}
repeat:
/* Reset timer case chip hangs without another request being added */
mod_timer(&dev_priv->gpu_error.hangcheck_timer,
round_jiffies_up(jiffies + DRM_I915_HANGCHECK_JIFFIES));
}
/* drm_dma.h hooks
*/
static void ironlake_irq_preinstall(struct drm_device *dev)
{
drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
atomic_set(&dev_priv->irq_received, 0);
I915_WRITE(HWSTAM, 0xeffe);
/* XXX hotplug from PCH */
I915_WRITE(DEIMR, 0xffffffff);
I915_WRITE(DEIER, 0x0);
POSTING_READ(DEIER);
/* and GT */
I915_WRITE(GTIMR, 0xffffffff);
I915_WRITE(GTIER, 0x0);
POSTING_READ(GTIER);
/* south display irq */
I915_WRITE(SDEIMR, 0xffffffff);
I915_WRITE(SDEIER, 0x0);
POSTING_READ(SDEIER);
}
static void valleyview_irq_preinstall(struct drm_device *dev)
{
drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
int pipe;
atomic_set(&dev_priv->irq_received, 0);
/* VLV magic */
I915_WRITE(VLV_IMR, 0);
I915_WRITE(RING_IMR(RENDER_RING_BASE), 0);
I915_WRITE(RING_IMR(GEN6_BSD_RING_BASE), 0);
I915_WRITE(RING_IMR(BLT_RING_BASE), 0);
/* and GT */
I915_WRITE(GTIIR, I915_READ(GTIIR));
I915_WRITE(GTIIR, I915_READ(GTIIR));
I915_WRITE(GTIMR, 0xffffffff);
I915_WRITE(GTIER, 0x0);
POSTING_READ(GTIER);
I915_WRITE(DPINVGTT, 0xff);
I915_WRITE(PORT_HOTPLUG_EN, 0);
I915_WRITE(PORT_HOTPLUG_STAT, I915_READ(PORT_HOTPLUG_STAT));
for_each_pipe(pipe)
I915_WRITE(PIPESTAT(pipe), 0xffff);
I915_WRITE(VLV_IIR, 0xffffffff);
I915_WRITE(VLV_IMR, 0xffffffff);
I915_WRITE(VLV_IER, 0x0);
POSTING_READ(VLV_IER);
}
/*
* Enable digital hotplug on the PCH, and configure the DP short pulse
* duration to 2ms (which is the minimum in the Display Port spec)
*
* This register is the same on all known PCH chips.
*/
static void ibx_enable_hotplug(struct drm_device *dev)
{
drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
u32 hotplug;
hotplug = I915_READ(PCH_PORT_HOTPLUG);
hotplug &= ~(PORTD_PULSE_DURATION_MASK|PORTC_PULSE_DURATION_MASK|PORTB_PULSE_DURATION_MASK);
hotplug |= PORTD_HOTPLUG_ENABLE | PORTD_PULSE_DURATION_2ms;
hotplug |= PORTC_HOTPLUG_ENABLE | PORTC_PULSE_DURATION_2ms;
hotplug |= PORTB_HOTPLUG_ENABLE | PORTB_PULSE_DURATION_2ms;
I915_WRITE(PCH_PORT_HOTPLUG, hotplug);
}
static void ibx_irq_postinstall(struct drm_device *dev)
{
drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
u32 mask;
if (HAS_PCH_IBX(dev))
mask = SDE_HOTPLUG_MASK |
SDE_GMBUS |
SDE_AUX_MASK;
else
mask = SDE_HOTPLUG_MASK_CPT |
SDE_GMBUS_CPT |
SDE_AUX_MASK_CPT;
I915_WRITE(SDEIIR, I915_READ(SDEIIR));
I915_WRITE(SDEIMR, ~mask);
I915_WRITE(SDEIER, mask);
POSTING_READ(SDEIER);
ibx_enable_hotplug(dev);
}
static int ironlake_irq_postinstall(struct drm_device *dev)
{
drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
/* enable kind of interrupts always enabled */
u32 display_mask = DE_MASTER_IRQ_CONTROL | DE_GSE | DE_PCH_EVENT |
DE_PLANEA_FLIP_DONE | DE_PLANEB_FLIP_DONE |
DE_AUX_CHANNEL_A;
u32 render_irqs;
dev_priv->irq_mask = ~display_mask;
/* should always can generate irq */
I915_WRITE(DEIIR, I915_READ(DEIIR));
I915_WRITE(DEIMR, dev_priv->irq_mask);
I915_WRITE(DEIER, display_mask | DE_PIPEA_VBLANK | DE_PIPEB_VBLANK);
POSTING_READ(DEIER);
dev_priv->gt_irq_mask = ~0;
I915_WRITE(GTIIR, I915_READ(GTIIR));
I915_WRITE(GTIMR, dev_priv->gt_irq_mask);
if (IS_GEN6(dev))
render_irqs =
GT_USER_INTERRUPT |
drm/i915: ring irq cleanups - gen6 put/get only need one argument rflags and gflags are always the same (see above explanation) - remove a couple redundantly defined IRQs - reordered some lines to make things go in descending order Every ring has its own interrupts, enables, masks, and status bits that are fed into the main interrupt enable/mask/status registers. At one point in time it seemed like a good idea to make our functions support the notion that each interrupt may have a different bit position in the corresponding register (blitter parser error may be bit n in IMR, but bit m in blitter IMR). It turned out though that the HW designers did us a solid on Gen6+ and this unfortunate situation has been avoided. This allows our interrupt code to be cleaned up a bit. I jammed this into one commit because there should be no functional change with this commit, and staging it into multiple commits was unnecessarily artificial IMO. CC: Chris Wilson <chris@chris-wilson.co.uk> CC: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Ben Widawsky <benjamin.widawsky@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> [danvet: - fixed up merged conflict with vlv changes. - added GEN6 to GT blitter bit, we only use it on gen6+. - added a comment to both ring irq bits and GT irq bits that on gen6+ these alias. - added comment that GT_BSD_USER_INTERRUPT is ilk-only. - I've got confused a bit that we still use GT_USER_INTERRUPT on ivb for the render ring - but this goes back to ilk where we have only gt interrupt bits and so we be equally confusing if changed.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-03-30 10:11:26 +08:00
GEN6_BSD_USER_INTERRUPT |
GEN6_BLITTER_USER_INTERRUPT;
else
render_irqs =
GT_USER_INTERRUPT |
GT_PIPE_NOTIFY |
GT_BSD_USER_INTERRUPT;
I915_WRITE(GTIER, render_irqs);
POSTING_READ(GTIER);
ibx_irq_postinstall(dev);
if (IS_IRONLAKE_M(dev)) {
/* Clear & enable PCU event interrupts */
I915_WRITE(DEIIR, DE_PCU_EVENT);
I915_WRITE(DEIER, I915_READ(DEIER) | DE_PCU_EVENT);
ironlake_enable_display_irq(dev_priv, DE_PCU_EVENT);
}
return 0;
}
static int ivybridge_irq_postinstall(struct drm_device *dev)
{
drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
/* enable kind of interrupts always enabled */
u32 display_mask =
DE_MASTER_IRQ_CONTROL | DE_GSE_IVB | DE_PCH_EVENT_IVB |
DE_PLANEC_FLIP_DONE_IVB |
DE_PLANEB_FLIP_DONE_IVB |
DE_PLANEA_FLIP_DONE_IVB |
DE_AUX_CHANNEL_A_IVB;
u32 render_irqs;
dev_priv->irq_mask = ~display_mask;
/* should always can generate irq */
I915_WRITE(DEIIR, I915_READ(DEIIR));
I915_WRITE(DEIMR, dev_priv->irq_mask);
I915_WRITE(DEIER,
display_mask |
DE_PIPEC_VBLANK_IVB |
DE_PIPEB_VBLANK_IVB |
DE_PIPEA_VBLANK_IVB);
POSTING_READ(DEIER);
dev_priv->gt_irq_mask = ~GT_GEN7_L3_PARITY_ERROR_INTERRUPT;
I915_WRITE(GTIIR, I915_READ(GTIIR));
I915_WRITE(GTIMR, dev_priv->gt_irq_mask);
drm/i915: ring irq cleanups - gen6 put/get only need one argument rflags and gflags are always the same (see above explanation) - remove a couple redundantly defined IRQs - reordered some lines to make things go in descending order Every ring has its own interrupts, enables, masks, and status bits that are fed into the main interrupt enable/mask/status registers. At one point in time it seemed like a good idea to make our functions support the notion that each interrupt may have a different bit position in the corresponding register (blitter parser error may be bit n in IMR, but bit m in blitter IMR). It turned out though that the HW designers did us a solid on Gen6+ and this unfortunate situation has been avoided. This allows our interrupt code to be cleaned up a bit. I jammed this into one commit because there should be no functional change with this commit, and staging it into multiple commits was unnecessarily artificial IMO. CC: Chris Wilson <chris@chris-wilson.co.uk> CC: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Ben Widawsky <benjamin.widawsky@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> [danvet: - fixed up merged conflict with vlv changes. - added GEN6 to GT blitter bit, we only use it on gen6+. - added a comment to both ring irq bits and GT irq bits that on gen6+ these alias. - added comment that GT_BSD_USER_INTERRUPT is ilk-only. - I've got confused a bit that we still use GT_USER_INTERRUPT on ivb for the render ring - but this goes back to ilk where we have only gt interrupt bits and so we be equally confusing if changed.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-03-30 10:11:26 +08:00
render_irqs = GT_USER_INTERRUPT | GEN6_BSD_USER_INTERRUPT |
GEN6_BLITTER_USER_INTERRUPT | GT_GEN7_L3_PARITY_ERROR_INTERRUPT;
I915_WRITE(GTIER, render_irqs);
POSTING_READ(GTIER);
ibx_irq_postinstall(dev);
return 0;
}
static int valleyview_irq_postinstall(struct drm_device *dev)
{
drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
u32 enable_mask;
u32 pipestat_enable = PLANE_FLIP_DONE_INT_EN_VLV;
u32 render_irqs;
u16 msid;
enable_mask = I915_DISPLAY_PORT_INTERRUPT;
enable_mask |= I915_DISPLAY_PIPE_A_EVENT_INTERRUPT |
I915_DISPLAY_PIPE_A_VBLANK_INTERRUPT |
I915_DISPLAY_PIPE_B_EVENT_INTERRUPT |
I915_DISPLAY_PIPE_B_VBLANK_INTERRUPT;
/*
*Leave vblank interrupts masked initially. enable/disable will
* toggle them based on usage.
*/
dev_priv->irq_mask = (~enable_mask) |
I915_DISPLAY_PIPE_A_VBLANK_INTERRUPT |
I915_DISPLAY_PIPE_B_VBLANK_INTERRUPT;
/* Hack for broken MSIs on VLV */
pci_write_config_dword(dev_priv->dev->pdev, 0x94, 0xfee00000);
pci_read_config_word(dev->pdev, 0x98, &msid);
msid &= 0xff; /* mask out delivery bits */
msid |= (1<<14);
pci_write_config_word(dev_priv->dev->pdev, 0x98, msid);
drm/i915: Fixup hpd irq register setup ordering For GMCH platforms we set up the hpd irq registers in the irq postinstall hook. But since we only enable the irq sources we actually need in PORT_HOTPLUG_EN/STATUS, taking dev_priv->hotplug_supported_mask into account, no hpd interrupt sources is enabled since commit 52d7ecedac3f96fb562cb482c139015372728638 Author: Daniel Vetter <daniel.vetter@ffwll.ch> Date: Sat Dec 1 21:03:22 2012 +0100 drm/i915: reorder setup sequence to have irqs for output setup Wrongly set-up interrupts also lead to broken hw-based load-detection on at least GM45, resulting in ghost VGA/TV-out outputs. To fix this, delay the hotplug register setup until after all outputs are set up, by moving it into a new dev_priv->display.hpd_irq_callback. We might also move the PCH_SPLIT platforms to such a setup eventually. Another funny part is that we need to delay the fbdev initial config probing until after the hpd regs are setup, for otherwise it'll detect ghost outputs. But we can only enable the hpd interrupt handling itself (and the output polling) _after_ that initial scan, due to massive locking brain-damage in the fbdev setup code. Add a big comment to explain this cute little dragon lair. v2: Encapsulate all the fbdev handling by wrapping the move call into intel_fbdev_initial_config in intel_fb.c. Requested by Chris Wilson. v3: Applied bikeshed from Jesse Barnes. v4: Imre Deak noticed that we also need to call intel_hpd_init after the drm_irqinstall calls in the gpu reset and resume paths - otherwise hotplug will be broken. Also improve the comment a bit about why hpd_init needs to be called before we set up the initial fbdev config. Bugzilla: Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=54943 Reported-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org> (v3) Reviewed-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-12-11 21:05:07 +08:00
I915_WRITE(PORT_HOTPLUG_EN, 0);
POSTING_READ(PORT_HOTPLUG_EN);
I915_WRITE(VLV_IMR, dev_priv->irq_mask);
I915_WRITE(VLV_IER, enable_mask);
I915_WRITE(VLV_IIR, 0xffffffff);
I915_WRITE(PIPESTAT(0), 0xffff);
I915_WRITE(PIPESTAT(1), 0xffff);
POSTING_READ(VLV_IER);
i915_enable_pipestat(dev_priv, 0, pipestat_enable);
i915_enable_pipestat(dev_priv, 0, PIPE_GMBUS_EVENT_ENABLE);
i915_enable_pipestat(dev_priv, 1, pipestat_enable);
I915_WRITE(VLV_IIR, 0xffffffff);
I915_WRITE(VLV_IIR, 0xffffffff);
I915_WRITE(GTIIR, I915_READ(GTIIR));
I915_WRITE(GTIMR, dev_priv->gt_irq_mask);
render_irqs = GT_USER_INTERRUPT | GEN6_BSD_USER_INTERRUPT |
GEN6_BLITTER_USER_INTERRUPT;
I915_WRITE(GTIER, render_irqs);
POSTING_READ(GTIER);
/* ack & enable invalid PTE error interrupts */
#if 0 /* FIXME: add support to irq handler for checking these bits */
I915_WRITE(DPINVGTT, DPINVGTT_STATUS_MASK);
I915_WRITE(DPINVGTT, DPINVGTT_EN_MASK);
#endif
I915_WRITE(VLV_MASTER_IER, MASTER_INTERRUPT_ENABLE);
drm/i915: Fixup hpd irq register setup ordering For GMCH platforms we set up the hpd irq registers in the irq postinstall hook. But since we only enable the irq sources we actually need in PORT_HOTPLUG_EN/STATUS, taking dev_priv->hotplug_supported_mask into account, no hpd interrupt sources is enabled since commit 52d7ecedac3f96fb562cb482c139015372728638 Author: Daniel Vetter <daniel.vetter@ffwll.ch> Date: Sat Dec 1 21:03:22 2012 +0100 drm/i915: reorder setup sequence to have irqs for output setup Wrongly set-up interrupts also lead to broken hw-based load-detection on at least GM45, resulting in ghost VGA/TV-out outputs. To fix this, delay the hotplug register setup until after all outputs are set up, by moving it into a new dev_priv->display.hpd_irq_callback. We might also move the PCH_SPLIT platforms to such a setup eventually. Another funny part is that we need to delay the fbdev initial config probing until after the hpd regs are setup, for otherwise it'll detect ghost outputs. But we can only enable the hpd interrupt handling itself (and the output polling) _after_ that initial scan, due to massive locking brain-damage in the fbdev setup code. Add a big comment to explain this cute little dragon lair. v2: Encapsulate all the fbdev handling by wrapping the move call into intel_fbdev_initial_config in intel_fb.c. Requested by Chris Wilson. v3: Applied bikeshed from Jesse Barnes. v4: Imre Deak noticed that we also need to call intel_hpd_init after the drm_irqinstall calls in the gpu reset and resume paths - otherwise hotplug will be broken. Also improve the comment a bit about why hpd_init needs to be called before we set up the initial fbdev config. Bugzilla: Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=54943 Reported-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org> (v3) Reviewed-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-12-11 21:05:07 +08:00
return 0;
}
static void valleyview_hpd_irq_setup(struct drm_device *dev)
{
drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
u32 hotplug_en = I915_READ(PORT_HOTPLUG_EN);
/* Note HDMI and DP share bits */
if (dev_priv->hotplug_supported_mask & PORTB_HOTPLUG_INT_STATUS)
hotplug_en |= PORTB_HOTPLUG_INT_EN;
if (dev_priv->hotplug_supported_mask & PORTC_HOTPLUG_INT_STATUS)
hotplug_en |= PORTC_HOTPLUG_INT_EN;
if (dev_priv->hotplug_supported_mask & PORTD_HOTPLUG_INT_STATUS)
hotplug_en |= PORTD_HOTPLUG_INT_EN;
if (dev_priv->hotplug_supported_mask & SDVOC_HOTPLUG_INT_STATUS_I915)
hotplug_en |= SDVOC_HOTPLUG_INT_EN;
if (dev_priv->hotplug_supported_mask & SDVOB_HOTPLUG_INT_STATUS_I915)
hotplug_en |= SDVOB_HOTPLUG_INT_EN;
if (dev_priv->hotplug_supported_mask & CRT_HOTPLUG_INT_STATUS) {
hotplug_en |= CRT_HOTPLUG_INT_EN;
hotplug_en |= CRT_HOTPLUG_VOLTAGE_COMPARE_50;
}
I915_WRITE(PORT_HOTPLUG_EN, hotplug_en);
}
static void valleyview_irq_uninstall(struct drm_device *dev)
{
drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
int pipe;
if (!dev_priv)
return;
for_each_pipe(pipe)
I915_WRITE(PIPESTAT(pipe), 0xffff);
I915_WRITE(HWSTAM, 0xffffffff);
I915_WRITE(PORT_HOTPLUG_EN, 0);
I915_WRITE(PORT_HOTPLUG_STAT, I915_READ(PORT_HOTPLUG_STAT));
for_each_pipe(pipe)
I915_WRITE(PIPESTAT(pipe), 0xffff);
I915_WRITE(VLV_IIR, 0xffffffff);
I915_WRITE(VLV_IMR, 0xffffffff);
I915_WRITE(VLV_IER, 0x0);
POSTING_READ(VLV_IER);
}
static void ironlake_irq_uninstall(struct drm_device *dev)
{
drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
if (!dev_priv)
return;
I915_WRITE(HWSTAM, 0xffffffff);
I915_WRITE(DEIMR, 0xffffffff);
I915_WRITE(DEIER, 0x0);
I915_WRITE(DEIIR, I915_READ(DEIIR));
I915_WRITE(GTIMR, 0xffffffff);
I915_WRITE(GTIER, 0x0);
I915_WRITE(GTIIR, I915_READ(GTIIR));
I915_WRITE(SDEIMR, 0xffffffff);
I915_WRITE(SDEIER, 0x0);
I915_WRITE(SDEIIR, I915_READ(SDEIIR));
}
static void i8xx_irq_preinstall(struct drm_device * dev)
{
drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
int pipe;
atomic_set(&dev_priv->irq_received, 0);
for_each_pipe(pipe)
I915_WRITE(PIPESTAT(pipe), 0);
I915_WRITE16(IMR, 0xffff);
I915_WRITE16(IER, 0x0);
POSTING_READ16(IER);
}
static int i8xx_irq_postinstall(struct drm_device *dev)
{
drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
I915_WRITE16(EMR,
~(I915_ERROR_PAGE_TABLE | I915_ERROR_MEMORY_REFRESH));
/* Unmask the interrupts that we always want on. */
dev_priv->irq_mask =
~(I915_DISPLAY_PIPE_A_EVENT_INTERRUPT |
I915_DISPLAY_PIPE_B_EVENT_INTERRUPT |
I915_DISPLAY_PLANE_A_FLIP_PENDING_INTERRUPT |
I915_DISPLAY_PLANE_B_FLIP_PENDING_INTERRUPT |
I915_RENDER_COMMAND_PARSER_ERROR_INTERRUPT);
I915_WRITE16(IMR, dev_priv->irq_mask);
I915_WRITE16(IER,
I915_DISPLAY_PIPE_A_EVENT_INTERRUPT |
I915_DISPLAY_PIPE_B_EVENT_INTERRUPT |
I915_RENDER_COMMAND_PARSER_ERROR_INTERRUPT |
I915_USER_INTERRUPT);
POSTING_READ16(IER);
return 0;
}
/*
* Returns true when a page flip has completed.
*/
static bool i8xx_handle_vblank(struct drm_device *dev,
int pipe, u16 iir)
{
drm_i915_private_t *dev_priv = dev->dev_private;
u16 flip_pending = DISPLAY_PLANE_FLIP_PENDING(pipe);
if (!drm_handle_vblank(dev, pipe))
return false;
if ((iir & flip_pending) == 0)
return false;
intel_prepare_page_flip(dev, pipe);
/* We detect FlipDone by looking for the change in PendingFlip from '1'
* to '0' on the following vblank, i.e. IIR has the Pendingflip
* asserted following the MI_DISPLAY_FLIP, but ISR is deasserted, hence
* the flip is completed (no longer pending). Since this doesn't raise
* an interrupt per se, we watch for the change at vblank.
*/
if (I915_READ16(ISR) & flip_pending)
return false;
intel_finish_page_flip(dev, pipe);
return true;
}
static irqreturn_t i8xx_irq_handler(int irq, void *arg)
{
struct drm_device *dev = (struct drm_device *) arg;
drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
u16 iir, new_iir;
u32 pipe_stats[2];
unsigned long irqflags;
int irq_received;
int pipe;
u16 flip_mask =
I915_DISPLAY_PLANE_A_FLIP_PENDING_INTERRUPT |
I915_DISPLAY_PLANE_B_FLIP_PENDING_INTERRUPT;
atomic_inc(&dev_priv->irq_received);
iir = I915_READ16(IIR);
if (iir == 0)
return IRQ_NONE;
while (iir & ~flip_mask) {
/* Can't rely on pipestat interrupt bit in iir as it might
* have been cleared after the pipestat interrupt was received.
* It doesn't set the bit in iir again, but it still produces
* interrupts (for non-MSI).
*/
spin_lock_irqsave(&dev_priv->irq_lock, irqflags);
if (iir & I915_RENDER_COMMAND_PARSER_ERROR_INTERRUPT)
i915_handle_error(dev, false);
for_each_pipe(pipe) {
int reg = PIPESTAT(pipe);
pipe_stats[pipe] = I915_READ(reg);
/*
* Clear the PIPE*STAT regs before the IIR
*/
if (pipe_stats[pipe] & 0x8000ffff) {
if (pipe_stats[pipe] & PIPE_FIFO_UNDERRUN_STATUS)
DRM_DEBUG_DRIVER("pipe %c underrun\n",
pipe_name(pipe));
I915_WRITE(reg, pipe_stats[pipe]);
irq_received = 1;
}
}
spin_unlock_irqrestore(&dev_priv->irq_lock, irqflags);
I915_WRITE16(IIR, iir & ~flip_mask);
new_iir = I915_READ16(IIR); /* Flush posted writes */
i915_update_dri1_breadcrumb(dev);
if (iir & I915_USER_INTERRUPT)
notify_ring(dev, &dev_priv->ring[RCS]);
if (pipe_stats[0] & PIPE_VBLANK_INTERRUPT_STATUS &&
i8xx_handle_vblank(dev, 0, iir))
flip_mask &= ~DISPLAY_PLANE_FLIP_PENDING(0);
if (pipe_stats[1] & PIPE_VBLANK_INTERRUPT_STATUS &&
i8xx_handle_vblank(dev, 1, iir))
flip_mask &= ~DISPLAY_PLANE_FLIP_PENDING(1);
iir = new_iir;
}
return IRQ_HANDLED;
}
static void i8xx_irq_uninstall(struct drm_device * dev)
{
drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
int pipe;
for_each_pipe(pipe) {
/* Clear enable bits; then clear status bits */
I915_WRITE(PIPESTAT(pipe), 0);
I915_WRITE(PIPESTAT(pipe), I915_READ(PIPESTAT(pipe)));
}
I915_WRITE16(IMR, 0xffff);
I915_WRITE16(IER, 0x0);
I915_WRITE16(IIR, I915_READ16(IIR));
}
static void i915_irq_preinstall(struct drm_device * dev)
{
drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
int pipe;
atomic_set(&dev_priv->irq_received, 0);
if (I915_HAS_HOTPLUG(dev)) {
I915_WRITE(PORT_HOTPLUG_EN, 0);
I915_WRITE(PORT_HOTPLUG_STAT, I915_READ(PORT_HOTPLUG_STAT));
}
I915_WRITE16(HWSTAM, 0xeffe);
for_each_pipe(pipe)
I915_WRITE(PIPESTAT(pipe), 0);
I915_WRITE(IMR, 0xffffffff);
I915_WRITE(IER, 0x0);
POSTING_READ(IER);
}
static int i915_irq_postinstall(struct drm_device *dev)
{
drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
u32 enable_mask;
I915_WRITE(EMR, ~(I915_ERROR_PAGE_TABLE | I915_ERROR_MEMORY_REFRESH));
/* Unmask the interrupts that we always want on. */
dev_priv->irq_mask =
~(I915_ASLE_INTERRUPT |
I915_DISPLAY_PIPE_A_EVENT_INTERRUPT |
I915_DISPLAY_PIPE_B_EVENT_INTERRUPT |
I915_DISPLAY_PLANE_A_FLIP_PENDING_INTERRUPT |
I915_DISPLAY_PLANE_B_FLIP_PENDING_INTERRUPT |
I915_RENDER_COMMAND_PARSER_ERROR_INTERRUPT);
enable_mask =
I915_ASLE_INTERRUPT |
I915_DISPLAY_PIPE_A_EVENT_INTERRUPT |
I915_DISPLAY_PIPE_B_EVENT_INTERRUPT |
I915_RENDER_COMMAND_PARSER_ERROR_INTERRUPT |
I915_USER_INTERRUPT;
if (I915_HAS_HOTPLUG(dev)) {
drm/i915: Fixup hpd irq register setup ordering For GMCH platforms we set up the hpd irq registers in the irq postinstall hook. But since we only enable the irq sources we actually need in PORT_HOTPLUG_EN/STATUS, taking dev_priv->hotplug_supported_mask into account, no hpd interrupt sources is enabled since commit 52d7ecedac3f96fb562cb482c139015372728638 Author: Daniel Vetter <daniel.vetter@ffwll.ch> Date: Sat Dec 1 21:03:22 2012 +0100 drm/i915: reorder setup sequence to have irqs for output setup Wrongly set-up interrupts also lead to broken hw-based load-detection on at least GM45, resulting in ghost VGA/TV-out outputs. To fix this, delay the hotplug register setup until after all outputs are set up, by moving it into a new dev_priv->display.hpd_irq_callback. We might also move the PCH_SPLIT platforms to such a setup eventually. Another funny part is that we need to delay the fbdev initial config probing until after the hpd regs are setup, for otherwise it'll detect ghost outputs. But we can only enable the hpd interrupt handling itself (and the output polling) _after_ that initial scan, due to massive locking brain-damage in the fbdev setup code. Add a big comment to explain this cute little dragon lair. v2: Encapsulate all the fbdev handling by wrapping the move call into intel_fbdev_initial_config in intel_fb.c. Requested by Chris Wilson. v3: Applied bikeshed from Jesse Barnes. v4: Imre Deak noticed that we also need to call intel_hpd_init after the drm_irqinstall calls in the gpu reset and resume paths - otherwise hotplug will be broken. Also improve the comment a bit about why hpd_init needs to be called before we set up the initial fbdev config. Bugzilla: Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=54943 Reported-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org> (v3) Reviewed-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-12-11 21:05:07 +08:00
I915_WRITE(PORT_HOTPLUG_EN, 0);
POSTING_READ(PORT_HOTPLUG_EN);
/* Enable in IER... */
enable_mask |= I915_DISPLAY_PORT_INTERRUPT;
/* and unmask in IMR */
dev_priv->irq_mask &= ~I915_DISPLAY_PORT_INTERRUPT;
}
I915_WRITE(IMR, dev_priv->irq_mask);
I915_WRITE(IER, enable_mask);
POSTING_READ(IER);
drm/i915: Fixup hpd irq register setup ordering For GMCH platforms we set up the hpd irq registers in the irq postinstall hook. But since we only enable the irq sources we actually need in PORT_HOTPLUG_EN/STATUS, taking dev_priv->hotplug_supported_mask into account, no hpd interrupt sources is enabled since commit 52d7ecedac3f96fb562cb482c139015372728638 Author: Daniel Vetter <daniel.vetter@ffwll.ch> Date: Sat Dec 1 21:03:22 2012 +0100 drm/i915: reorder setup sequence to have irqs for output setup Wrongly set-up interrupts also lead to broken hw-based load-detection on at least GM45, resulting in ghost VGA/TV-out outputs. To fix this, delay the hotplug register setup until after all outputs are set up, by moving it into a new dev_priv->display.hpd_irq_callback. We might also move the PCH_SPLIT platforms to such a setup eventually. Another funny part is that we need to delay the fbdev initial config probing until after the hpd regs are setup, for otherwise it'll detect ghost outputs. But we can only enable the hpd interrupt handling itself (and the output polling) _after_ that initial scan, due to massive locking brain-damage in the fbdev setup code. Add a big comment to explain this cute little dragon lair. v2: Encapsulate all the fbdev handling by wrapping the move call into intel_fbdev_initial_config in intel_fb.c. Requested by Chris Wilson. v3: Applied bikeshed from Jesse Barnes. v4: Imre Deak noticed that we also need to call intel_hpd_init after the drm_irqinstall calls in the gpu reset and resume paths - otherwise hotplug will be broken. Also improve the comment a bit about why hpd_init needs to be called before we set up the initial fbdev config. Bugzilla: Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=54943 Reported-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org> (v3) Reviewed-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-12-11 21:05:07 +08:00
intel_opregion_enable_asle(dev);
return 0;
}
static void i915_hpd_irq_setup(struct drm_device *dev)
{
drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
u32 hotplug_en;
if (I915_HAS_HOTPLUG(dev)) {
drm/i915: Fixup hpd irq register setup ordering For GMCH platforms we set up the hpd irq registers in the irq postinstall hook. But since we only enable the irq sources we actually need in PORT_HOTPLUG_EN/STATUS, taking dev_priv->hotplug_supported_mask into account, no hpd interrupt sources is enabled since commit 52d7ecedac3f96fb562cb482c139015372728638 Author: Daniel Vetter <daniel.vetter@ffwll.ch> Date: Sat Dec 1 21:03:22 2012 +0100 drm/i915: reorder setup sequence to have irqs for output setup Wrongly set-up interrupts also lead to broken hw-based load-detection on at least GM45, resulting in ghost VGA/TV-out outputs. To fix this, delay the hotplug register setup until after all outputs are set up, by moving it into a new dev_priv->display.hpd_irq_callback. We might also move the PCH_SPLIT platforms to such a setup eventually. Another funny part is that we need to delay the fbdev initial config probing until after the hpd regs are setup, for otherwise it'll detect ghost outputs. But we can only enable the hpd interrupt handling itself (and the output polling) _after_ that initial scan, due to massive locking brain-damage in the fbdev setup code. Add a big comment to explain this cute little dragon lair. v2: Encapsulate all the fbdev handling by wrapping the move call into intel_fbdev_initial_config in intel_fb.c. Requested by Chris Wilson. v3: Applied bikeshed from Jesse Barnes. v4: Imre Deak noticed that we also need to call intel_hpd_init after the drm_irqinstall calls in the gpu reset and resume paths - otherwise hotplug will be broken. Also improve the comment a bit about why hpd_init needs to be called before we set up the initial fbdev config. Bugzilla: Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=54943 Reported-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org> (v3) Reviewed-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-12-11 21:05:07 +08:00
hotplug_en = I915_READ(PORT_HOTPLUG_EN);
if (dev_priv->hotplug_supported_mask & PORTB_HOTPLUG_INT_STATUS)
hotplug_en |= PORTB_HOTPLUG_INT_EN;
if (dev_priv->hotplug_supported_mask & PORTC_HOTPLUG_INT_STATUS)
hotplug_en |= PORTC_HOTPLUG_INT_EN;
if (dev_priv->hotplug_supported_mask & PORTD_HOTPLUG_INT_STATUS)
hotplug_en |= PORTD_HOTPLUG_INT_EN;
if (dev_priv->hotplug_supported_mask & SDVOC_HOTPLUG_INT_STATUS_I915)
hotplug_en |= SDVOC_HOTPLUG_INT_EN;
if (dev_priv->hotplug_supported_mask & SDVOB_HOTPLUG_INT_STATUS_I915)
hotplug_en |= SDVOB_HOTPLUG_INT_EN;
if (dev_priv->hotplug_supported_mask & CRT_HOTPLUG_INT_STATUS) {
hotplug_en |= CRT_HOTPLUG_INT_EN;
hotplug_en |= CRT_HOTPLUG_VOLTAGE_COMPARE_50;
}
/* Ignore TV since it's buggy */
I915_WRITE(PORT_HOTPLUG_EN, hotplug_en);
}
}
/*
* Returns true when a page flip has completed.
*/
static bool i915_handle_vblank(struct drm_device *dev,
int plane, int pipe, u32 iir)
{
drm_i915_private_t *dev_priv = dev->dev_private;
u32 flip_pending = DISPLAY_PLANE_FLIP_PENDING(plane);
if (!drm_handle_vblank(dev, pipe))
return false;
if ((iir & flip_pending) == 0)
return false;
intel_prepare_page_flip(dev, plane);
/* We detect FlipDone by looking for the change in PendingFlip from '1'
* to '0' on the following vblank, i.e. IIR has the Pendingflip
* asserted following the MI_DISPLAY_FLIP, but ISR is deasserted, hence
* the flip is completed (no longer pending). Since this doesn't raise
* an interrupt per se, we watch for the change at vblank.
*/
if (I915_READ(ISR) & flip_pending)
return false;
intel_finish_page_flip(dev, pipe);
return true;
}
static irqreturn_t i915_irq_handler(int irq, void *arg)
{
struct drm_device *dev = (struct drm_device *) arg;
drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
u32 iir, new_iir, pipe_stats[I915_MAX_PIPES];
unsigned long irqflags;
u32 flip_mask =
I915_DISPLAY_PLANE_A_FLIP_PENDING_INTERRUPT |
I915_DISPLAY_PLANE_B_FLIP_PENDING_INTERRUPT;
int pipe, ret = IRQ_NONE;
atomic_inc(&dev_priv->irq_received);
iir = I915_READ(IIR);
do {
bool irq_received = (iir & ~flip_mask) != 0;
bool blc_event = false;
/* Can't rely on pipestat interrupt bit in iir as it might
* have been cleared after the pipestat interrupt was received.
* It doesn't set the bit in iir again, but it still produces
* interrupts (for non-MSI).
*/
spin_lock_irqsave(&dev_priv->irq_lock, irqflags);
if (iir & I915_RENDER_COMMAND_PARSER_ERROR_INTERRUPT)
i915_handle_error(dev, false);
for_each_pipe(pipe) {
int reg = PIPESTAT(pipe);
pipe_stats[pipe] = I915_READ(reg);
/* Clear the PIPE*STAT regs before the IIR */
if (pipe_stats[pipe] & 0x8000ffff) {
if (pipe_stats[pipe] & PIPE_FIFO_UNDERRUN_STATUS)
DRM_DEBUG_DRIVER("pipe %c underrun\n",
pipe_name(pipe));
I915_WRITE(reg, pipe_stats[pipe]);
irq_received = true;
}
}
spin_unlock_irqrestore(&dev_priv->irq_lock, irqflags);
if (!irq_received)
break;
/* Consume port. Then clear IIR or we'll miss events */
if ((I915_HAS_HOTPLUG(dev)) &&
(iir & I915_DISPLAY_PORT_INTERRUPT)) {
u32 hotplug_status = I915_READ(PORT_HOTPLUG_STAT);
DRM_DEBUG_DRIVER("hotplug event received, stat 0x%08x\n",
hotplug_status);
if (hotplug_status & dev_priv->hotplug_supported_mask)
queue_work(dev_priv->wq,
&dev_priv->hotplug_work);
I915_WRITE(PORT_HOTPLUG_STAT, hotplug_status);
POSTING_READ(PORT_HOTPLUG_STAT);
}
I915_WRITE(IIR, iir & ~flip_mask);
new_iir = I915_READ(IIR); /* Flush posted writes */
if (iir & I915_USER_INTERRUPT)
notify_ring(dev, &dev_priv->ring[RCS]);
for_each_pipe(pipe) {
int plane = pipe;
if (IS_MOBILE(dev))
plane = !plane;
if (pipe_stats[pipe] & PIPE_VBLANK_INTERRUPT_STATUS &&
i915_handle_vblank(dev, plane, pipe, iir))
flip_mask &= ~DISPLAY_PLANE_FLIP_PENDING(plane);
if (pipe_stats[pipe] & PIPE_LEGACY_BLC_EVENT_STATUS)
blc_event = true;
}
if (blc_event || (iir & I915_ASLE_INTERRUPT))
intel_opregion_asle_intr(dev);
/* With MSI, interrupts are only generated when iir
* transitions from zero to nonzero. If another bit got
* set while we were handling the existing iir bits, then
* we would never get another interrupt.
*
* This is fine on non-MSI as well, as if we hit this path
* we avoid exiting the interrupt handler only to generate
* another one.
*
* Note that for MSI this could cause a stray interrupt report
* if an interrupt landed in the time between writing IIR and
* the posting read. This should be rare enough to never
* trigger the 99% of 100,000 interrupts test for disabling
* stray interrupts.
*/
ret = IRQ_HANDLED;
iir = new_iir;
} while (iir & ~flip_mask);
i915_update_dri1_breadcrumb(dev);
return ret;
}
static void i915_irq_uninstall(struct drm_device * dev)
{
drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
int pipe;
if (I915_HAS_HOTPLUG(dev)) {
I915_WRITE(PORT_HOTPLUG_EN, 0);
I915_WRITE(PORT_HOTPLUG_STAT, I915_READ(PORT_HOTPLUG_STAT));
}
I915_WRITE16(HWSTAM, 0xffff);
for_each_pipe(pipe) {
/* Clear enable bits; then clear status bits */
I915_WRITE(PIPESTAT(pipe), 0);
I915_WRITE(PIPESTAT(pipe), I915_READ(PIPESTAT(pipe)));
}
I915_WRITE(IMR, 0xffffffff);
I915_WRITE(IER, 0x0);
I915_WRITE(IIR, I915_READ(IIR));
}
static void i965_irq_preinstall(struct drm_device * dev)
{
drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
int pipe;
atomic_set(&dev_priv->irq_received, 0);
I915_WRITE(PORT_HOTPLUG_EN, 0);
I915_WRITE(PORT_HOTPLUG_STAT, I915_READ(PORT_HOTPLUG_STAT));
I915_WRITE(HWSTAM, 0xeffe);
for_each_pipe(pipe)
I915_WRITE(PIPESTAT(pipe), 0);
I915_WRITE(IMR, 0xffffffff);
I915_WRITE(IER, 0x0);
POSTING_READ(IER);
}
static int i965_irq_postinstall(struct drm_device *dev)
{
drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
u32 enable_mask;
u32 error_mask;
/* Unmask the interrupts that we always want on. */
dev_priv->irq_mask = ~(I915_ASLE_INTERRUPT |
I915_DISPLAY_PORT_INTERRUPT |
I915_DISPLAY_PIPE_A_EVENT_INTERRUPT |
I915_DISPLAY_PIPE_B_EVENT_INTERRUPT |
I915_DISPLAY_PLANE_A_FLIP_PENDING_INTERRUPT |
I915_DISPLAY_PLANE_B_FLIP_PENDING_INTERRUPT |
I915_RENDER_COMMAND_PARSER_ERROR_INTERRUPT);
enable_mask = ~dev_priv->irq_mask;
enable_mask &= ~(I915_DISPLAY_PLANE_A_FLIP_PENDING_INTERRUPT |
I915_DISPLAY_PLANE_B_FLIP_PENDING_INTERRUPT);
enable_mask |= I915_USER_INTERRUPT;
if (IS_G4X(dev))
enable_mask |= I915_BSD_USER_INTERRUPT;
i915_enable_pipestat(dev_priv, 0, PIPE_GMBUS_EVENT_ENABLE);
/*
* Enable some error detection, note the instruction error mask
* bit is reserved, so we leave it masked.
*/
if (IS_G4X(dev)) {
error_mask = ~(GM45_ERROR_PAGE_TABLE |
GM45_ERROR_MEM_PRIV |
GM45_ERROR_CP_PRIV |
I915_ERROR_MEMORY_REFRESH);
} else {
error_mask = ~(I915_ERROR_PAGE_TABLE |
I915_ERROR_MEMORY_REFRESH);
}
I915_WRITE(EMR, error_mask);
I915_WRITE(IMR, dev_priv->irq_mask);
I915_WRITE(IER, enable_mask);
POSTING_READ(IER);
drm/i915: Fixup hpd irq register setup ordering For GMCH platforms we set up the hpd irq registers in the irq postinstall hook. But since we only enable the irq sources we actually need in PORT_HOTPLUG_EN/STATUS, taking dev_priv->hotplug_supported_mask into account, no hpd interrupt sources is enabled since commit 52d7ecedac3f96fb562cb482c139015372728638 Author: Daniel Vetter <daniel.vetter@ffwll.ch> Date: Sat Dec 1 21:03:22 2012 +0100 drm/i915: reorder setup sequence to have irqs for output setup Wrongly set-up interrupts also lead to broken hw-based load-detection on at least GM45, resulting in ghost VGA/TV-out outputs. To fix this, delay the hotplug register setup until after all outputs are set up, by moving it into a new dev_priv->display.hpd_irq_callback. We might also move the PCH_SPLIT platforms to such a setup eventually. Another funny part is that we need to delay the fbdev initial config probing until after the hpd regs are setup, for otherwise it'll detect ghost outputs. But we can only enable the hpd interrupt handling itself (and the output polling) _after_ that initial scan, due to massive locking brain-damage in the fbdev setup code. Add a big comment to explain this cute little dragon lair. v2: Encapsulate all the fbdev handling by wrapping the move call into intel_fbdev_initial_config in intel_fb.c. Requested by Chris Wilson. v3: Applied bikeshed from Jesse Barnes. v4: Imre Deak noticed that we also need to call intel_hpd_init after the drm_irqinstall calls in the gpu reset and resume paths - otherwise hotplug will be broken. Also improve the comment a bit about why hpd_init needs to be called before we set up the initial fbdev config. Bugzilla: Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=54943 Reported-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org> (v3) Reviewed-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-12-11 21:05:07 +08:00
I915_WRITE(PORT_HOTPLUG_EN, 0);
POSTING_READ(PORT_HOTPLUG_EN);
intel_opregion_enable_asle(dev);
return 0;
}
static void i965_hpd_irq_setup(struct drm_device *dev)
{
drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
u32 hotplug_en;
/* Note HDMI and DP share hotplug bits */
hotplug_en = 0;
if (dev_priv->hotplug_supported_mask & PORTB_HOTPLUG_INT_STATUS)
hotplug_en |= PORTB_HOTPLUG_INT_EN;
if (dev_priv->hotplug_supported_mask & PORTC_HOTPLUG_INT_STATUS)
hotplug_en |= PORTC_HOTPLUG_INT_EN;
if (dev_priv->hotplug_supported_mask & PORTD_HOTPLUG_INT_STATUS)
hotplug_en |= PORTD_HOTPLUG_INT_EN;
if (IS_G4X(dev)) {
if (dev_priv->hotplug_supported_mask & SDVOC_HOTPLUG_INT_STATUS_G4X)
hotplug_en |= SDVOC_HOTPLUG_INT_EN;
if (dev_priv->hotplug_supported_mask & SDVOB_HOTPLUG_INT_STATUS_G4X)
hotplug_en |= SDVOB_HOTPLUG_INT_EN;
} else {
if (dev_priv->hotplug_supported_mask & SDVOC_HOTPLUG_INT_STATUS_I965)
hotplug_en |= SDVOC_HOTPLUG_INT_EN;
if (dev_priv->hotplug_supported_mask & SDVOB_HOTPLUG_INT_STATUS_I965)
hotplug_en |= SDVOB_HOTPLUG_INT_EN;
}
if (dev_priv->hotplug_supported_mask & CRT_HOTPLUG_INT_STATUS) {
hotplug_en |= CRT_HOTPLUG_INT_EN;
/* Programming the CRT detection parameters tends
to generate a spurious hotplug event about three
seconds later. So just do it once.
*/
if (IS_G4X(dev))
hotplug_en |= CRT_HOTPLUG_ACTIVATION_PERIOD_64;
hotplug_en |= CRT_HOTPLUG_VOLTAGE_COMPARE_50;
}
/* Ignore TV since it's buggy */
I915_WRITE(PORT_HOTPLUG_EN, hotplug_en);
}
static irqreturn_t i965_irq_handler(int irq, void *arg)
{
struct drm_device *dev = (struct drm_device *) arg;
drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
u32 iir, new_iir;
u32 pipe_stats[I915_MAX_PIPES];
unsigned long irqflags;
int irq_received;
int ret = IRQ_NONE, pipe;
u32 flip_mask =
I915_DISPLAY_PLANE_A_FLIP_PENDING_INTERRUPT |
I915_DISPLAY_PLANE_B_FLIP_PENDING_INTERRUPT;
atomic_inc(&dev_priv->irq_received);
iir = I915_READ(IIR);
for (;;) {
bool blc_event = false;
irq_received = (iir & ~flip_mask) != 0;
/* Can't rely on pipestat interrupt bit in iir as it might
* have been cleared after the pipestat interrupt was received.
* It doesn't set the bit in iir again, but it still produces
* interrupts (for non-MSI).
*/
spin_lock_irqsave(&dev_priv->irq_lock, irqflags);
if (iir & I915_RENDER_COMMAND_PARSER_ERROR_INTERRUPT)
i915_handle_error(dev, false);
for_each_pipe(pipe) {
int reg = PIPESTAT(pipe);
pipe_stats[pipe] = I915_READ(reg);
/*
* Clear the PIPE*STAT regs before the IIR
*/
if (pipe_stats[pipe] & 0x8000ffff) {
if (pipe_stats[pipe] & PIPE_FIFO_UNDERRUN_STATUS)
DRM_DEBUG_DRIVER("pipe %c underrun\n",
pipe_name(pipe));
I915_WRITE(reg, pipe_stats[pipe]);
irq_received = 1;
}
}
spin_unlock_irqrestore(&dev_priv->irq_lock, irqflags);
if (!irq_received)
break;
ret = IRQ_HANDLED;
/* Consume port. Then clear IIR or we'll miss events */
if (iir & I915_DISPLAY_PORT_INTERRUPT) {
u32 hotplug_status = I915_READ(PORT_HOTPLUG_STAT);
DRM_DEBUG_DRIVER("hotplug event received, stat 0x%08x\n",
hotplug_status);
if (hotplug_status & dev_priv->hotplug_supported_mask)
queue_work(dev_priv->wq,
&dev_priv->hotplug_work);
I915_WRITE(PORT_HOTPLUG_STAT, hotplug_status);
I915_READ(PORT_HOTPLUG_STAT);
}
I915_WRITE(IIR, iir & ~flip_mask);
new_iir = I915_READ(IIR); /* Flush posted writes */
if (iir & I915_USER_INTERRUPT)
notify_ring(dev, &dev_priv->ring[RCS]);
if (iir & I915_BSD_USER_INTERRUPT)
notify_ring(dev, &dev_priv->ring[VCS]);
for_each_pipe(pipe) {
if (pipe_stats[pipe] & PIPE_START_VBLANK_INTERRUPT_STATUS &&
i915_handle_vblank(dev, pipe, pipe, iir))
flip_mask &= ~DISPLAY_PLANE_FLIP_PENDING(pipe);
if (pipe_stats[pipe] & PIPE_LEGACY_BLC_EVENT_STATUS)
blc_event = true;
}
if (blc_event || (iir & I915_ASLE_INTERRUPT))
intel_opregion_asle_intr(dev);
if (pipe_stats[0] & PIPE_GMBUS_INTERRUPT_STATUS)
gmbus_irq_handler(dev);
/* With MSI, interrupts are only generated when iir
* transitions from zero to nonzero. If another bit got
* set while we were handling the existing iir bits, then
* we would never get another interrupt.
*
* This is fine on non-MSI as well, as if we hit this path
* we avoid exiting the interrupt handler only to generate
* another one.
*
* Note that for MSI this could cause a stray interrupt report
* if an interrupt landed in the time between writing IIR and
* the posting read. This should be rare enough to never
* trigger the 99% of 100,000 interrupts test for disabling
* stray interrupts.
*/
iir = new_iir;
}
i915_update_dri1_breadcrumb(dev);
return ret;
}
static void i965_irq_uninstall(struct drm_device * dev)
{
drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
int pipe;
if (!dev_priv)
return;
I915_WRITE(PORT_HOTPLUG_EN, 0);
I915_WRITE(PORT_HOTPLUG_STAT, I915_READ(PORT_HOTPLUG_STAT));
I915_WRITE(HWSTAM, 0xffffffff);
for_each_pipe(pipe)
I915_WRITE(PIPESTAT(pipe), 0);
I915_WRITE(IMR, 0xffffffff);
I915_WRITE(IER, 0x0);
for_each_pipe(pipe)
I915_WRITE(PIPESTAT(pipe),
I915_READ(PIPESTAT(pipe)) & 0x8000ffff);
I915_WRITE(IIR, I915_READ(IIR));
}
void intel_irq_init(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
INIT_WORK(&dev_priv->hotplug_work, i915_hotplug_work_func);
INIT_WORK(&dev_priv->gpu_error.work, i915_error_work_func);
INIT_WORK(&dev_priv->rps.work, gen6_pm_rps_work);
INIT_WORK(&dev_priv->l3_parity.error_work, ivybridge_parity_work);
setup_timer(&dev_priv->gpu_error.hangcheck_timer,
i915_hangcheck_elapsed,
(unsigned long) dev);
pm_qos_add_request(&dev_priv->pm_qos, PM_QOS_CPU_DMA_LATENCY, PM_QOS_DEFAULT_VALUE);
drm/i915: irq-drive the dp aux communication At least on the platforms that have a dp aux irq and also have it enabled - vlvhsw should have one, too. But I don't have a machine to test this on. Judging from docs there's no dp aux interrupt for gm45. Also, I only have an ivb cpu edp machine, so the dp aux A code for snb/ilk is untested. For dpcd probing when nothing is connected it slashes about 5ms of cpu time (cpu time is now negligible), which agrees with 3 * 5 400 usec timeouts. A previous version of this patch increases the time required to go through the dp_detect cycle (which includes reading the edid) from around 33 ms to around 40 ms. Experiments indicated that this is purely due to the irq latency - the hw doesn't allow us to queue up dp aux transactions and hence irq latency directly affects throughput. gmbus is much better, there we have a 8 byte buffer, and we get the irq once another 4 bytes can be queued up. But by using the pm_qos interface to request the lowest possible cpu wake-up latency this slowdown completely disappeared. Since all our output detection logic is single-threaded with the mode_config mutex right now anyway, I've decide not ot play fancy and to just reuse the gmbus wait queue. But this would definitely prep the way to run dp detection on different ports in parallel v2: Add a timeout for dp aux transfers when using interrupts - the hw _does_ prevent this with the hw-based 400 usec timeout, but if the irq somehow doesn't arrive we're screwed. Lesson learned while developing this ;-) v3: While at it also convert the busy-loop to wait_for_atomic, so that we don't run the risk of an infinite loop any more. v4: Ensure we have the smallest possible irq latency by using the pm_qos interface. v5: Add a comment to the code to explain why we frob pm_qos. Suggested by Chris Wilson. v6: Disable dp irq for vlv, that's easier than trying to get at docs and hw. v7: Squash in a fix for Haswell that Paulo Zanoni tracked down - the dp aux registers aren't at a fixed offset any more, but can be on the PCH while the DP port is on the cpu die. Reviewed-by: Imre Deak <imre.deak@intel.com> (v6) Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-12-01 20:53:48 +08:00
dev->driver->get_vblank_counter = i915_get_vblank_counter;
dev->max_vblank_count = 0xffffff; /* only 24 bits of frame count */
if (IS_G4X(dev) || INTEL_INFO(dev)->gen >= 5) {
dev->max_vblank_count = 0xffffffff; /* full 32 bit counter */
dev->driver->get_vblank_counter = gm45_get_vblank_counter;
}
if (drm_core_check_feature(dev, DRIVER_MODESET))
dev->driver->get_vblank_timestamp = i915_get_vblank_timestamp;
else
dev->driver->get_vblank_timestamp = NULL;
dev->driver->get_scanout_position = i915_get_crtc_scanoutpos;
if (IS_VALLEYVIEW(dev)) {
dev->driver->irq_handler = valleyview_irq_handler;
dev->driver->irq_preinstall = valleyview_irq_preinstall;
dev->driver->irq_postinstall = valleyview_irq_postinstall;
dev->driver->irq_uninstall = valleyview_irq_uninstall;
dev->driver->enable_vblank = valleyview_enable_vblank;
dev->driver->disable_vblank = valleyview_disable_vblank;
drm/i915: Fixup hpd irq register setup ordering For GMCH platforms we set up the hpd irq registers in the irq postinstall hook. But since we only enable the irq sources we actually need in PORT_HOTPLUG_EN/STATUS, taking dev_priv->hotplug_supported_mask into account, no hpd interrupt sources is enabled since commit 52d7ecedac3f96fb562cb482c139015372728638 Author: Daniel Vetter <daniel.vetter@ffwll.ch> Date: Sat Dec 1 21:03:22 2012 +0100 drm/i915: reorder setup sequence to have irqs for output setup Wrongly set-up interrupts also lead to broken hw-based load-detection on at least GM45, resulting in ghost VGA/TV-out outputs. To fix this, delay the hotplug register setup until after all outputs are set up, by moving it into a new dev_priv->display.hpd_irq_callback. We might also move the PCH_SPLIT platforms to such a setup eventually. Another funny part is that we need to delay the fbdev initial config probing until after the hpd regs are setup, for otherwise it'll detect ghost outputs. But we can only enable the hpd interrupt handling itself (and the output polling) _after_ that initial scan, due to massive locking brain-damage in the fbdev setup code. Add a big comment to explain this cute little dragon lair. v2: Encapsulate all the fbdev handling by wrapping the move call into intel_fbdev_initial_config in intel_fb.c. Requested by Chris Wilson. v3: Applied bikeshed from Jesse Barnes. v4: Imre Deak noticed that we also need to call intel_hpd_init after the drm_irqinstall calls in the gpu reset and resume paths - otherwise hotplug will be broken. Also improve the comment a bit about why hpd_init needs to be called before we set up the initial fbdev config. Bugzilla: Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=54943 Reported-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org> (v3) Reviewed-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-12-11 21:05:07 +08:00
dev_priv->display.hpd_irq_setup = valleyview_hpd_irq_setup;
} else if (IS_IVYBRIDGE(dev) || IS_HASWELL(dev)) {
/* Share pre & uninstall handlers with ILK/SNB */
dev->driver->irq_handler = ivybridge_irq_handler;
dev->driver->irq_preinstall = ironlake_irq_preinstall;
dev->driver->irq_postinstall = ivybridge_irq_postinstall;
dev->driver->irq_uninstall = ironlake_irq_uninstall;
dev->driver->enable_vblank = ivybridge_enable_vblank;
dev->driver->disable_vblank = ivybridge_disable_vblank;
} else if (HAS_PCH_SPLIT(dev)) {
dev->driver->irq_handler = ironlake_irq_handler;
dev->driver->irq_preinstall = ironlake_irq_preinstall;
dev->driver->irq_postinstall = ironlake_irq_postinstall;
dev->driver->irq_uninstall = ironlake_irq_uninstall;
dev->driver->enable_vblank = ironlake_enable_vblank;
dev->driver->disable_vblank = ironlake_disable_vblank;
} else {
if (INTEL_INFO(dev)->gen == 2) {
dev->driver->irq_preinstall = i8xx_irq_preinstall;
dev->driver->irq_postinstall = i8xx_irq_postinstall;
dev->driver->irq_handler = i8xx_irq_handler;
dev->driver->irq_uninstall = i8xx_irq_uninstall;
} else if (INTEL_INFO(dev)->gen == 3) {
dev->driver->irq_preinstall = i915_irq_preinstall;
dev->driver->irq_postinstall = i915_irq_postinstall;
dev->driver->irq_uninstall = i915_irq_uninstall;
dev->driver->irq_handler = i915_irq_handler;
drm/i915: Fixup hpd irq register setup ordering For GMCH platforms we set up the hpd irq registers in the irq postinstall hook. But since we only enable the irq sources we actually need in PORT_HOTPLUG_EN/STATUS, taking dev_priv->hotplug_supported_mask into account, no hpd interrupt sources is enabled since commit 52d7ecedac3f96fb562cb482c139015372728638 Author: Daniel Vetter <daniel.vetter@ffwll.ch> Date: Sat Dec 1 21:03:22 2012 +0100 drm/i915: reorder setup sequence to have irqs for output setup Wrongly set-up interrupts also lead to broken hw-based load-detection on at least GM45, resulting in ghost VGA/TV-out outputs. To fix this, delay the hotplug register setup until after all outputs are set up, by moving it into a new dev_priv->display.hpd_irq_callback. We might also move the PCH_SPLIT platforms to such a setup eventually. Another funny part is that we need to delay the fbdev initial config probing until after the hpd regs are setup, for otherwise it'll detect ghost outputs. But we can only enable the hpd interrupt handling itself (and the output polling) _after_ that initial scan, due to massive locking brain-damage in the fbdev setup code. Add a big comment to explain this cute little dragon lair. v2: Encapsulate all the fbdev handling by wrapping the move call into intel_fbdev_initial_config in intel_fb.c. Requested by Chris Wilson. v3: Applied bikeshed from Jesse Barnes. v4: Imre Deak noticed that we also need to call intel_hpd_init after the drm_irqinstall calls in the gpu reset and resume paths - otherwise hotplug will be broken. Also improve the comment a bit about why hpd_init needs to be called before we set up the initial fbdev config. Bugzilla: Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=54943 Reported-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org> (v3) Reviewed-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-12-11 21:05:07 +08:00
dev_priv->display.hpd_irq_setup = i915_hpd_irq_setup;
} else {
dev->driver->irq_preinstall = i965_irq_preinstall;
dev->driver->irq_postinstall = i965_irq_postinstall;
dev->driver->irq_uninstall = i965_irq_uninstall;
dev->driver->irq_handler = i965_irq_handler;
drm/i915: Fixup hpd irq register setup ordering For GMCH platforms we set up the hpd irq registers in the irq postinstall hook. But since we only enable the irq sources we actually need in PORT_HOTPLUG_EN/STATUS, taking dev_priv->hotplug_supported_mask into account, no hpd interrupt sources is enabled since commit 52d7ecedac3f96fb562cb482c139015372728638 Author: Daniel Vetter <daniel.vetter@ffwll.ch> Date: Sat Dec 1 21:03:22 2012 +0100 drm/i915: reorder setup sequence to have irqs for output setup Wrongly set-up interrupts also lead to broken hw-based load-detection on at least GM45, resulting in ghost VGA/TV-out outputs. To fix this, delay the hotplug register setup until after all outputs are set up, by moving it into a new dev_priv->display.hpd_irq_callback. We might also move the PCH_SPLIT platforms to such a setup eventually. Another funny part is that we need to delay the fbdev initial config probing until after the hpd regs are setup, for otherwise it'll detect ghost outputs. But we can only enable the hpd interrupt handling itself (and the output polling) _after_ that initial scan, due to massive locking brain-damage in the fbdev setup code. Add a big comment to explain this cute little dragon lair. v2: Encapsulate all the fbdev handling by wrapping the move call into intel_fbdev_initial_config in intel_fb.c. Requested by Chris Wilson. v3: Applied bikeshed from Jesse Barnes. v4: Imre Deak noticed that we also need to call intel_hpd_init after the drm_irqinstall calls in the gpu reset and resume paths - otherwise hotplug will be broken. Also improve the comment a bit about why hpd_init needs to be called before we set up the initial fbdev config. Bugzilla: Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=54943 Reported-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org> (v3) Reviewed-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-12-11 21:05:07 +08:00
dev_priv->display.hpd_irq_setup = i965_hpd_irq_setup;
}
dev->driver->enable_vblank = i915_enable_vblank;
dev->driver->disable_vblank = i915_disable_vblank;
}
}
drm/i915: Fixup hpd irq register setup ordering For GMCH platforms we set up the hpd irq registers in the irq postinstall hook. But since we only enable the irq sources we actually need in PORT_HOTPLUG_EN/STATUS, taking dev_priv->hotplug_supported_mask into account, no hpd interrupt sources is enabled since commit 52d7ecedac3f96fb562cb482c139015372728638 Author: Daniel Vetter <daniel.vetter@ffwll.ch> Date: Sat Dec 1 21:03:22 2012 +0100 drm/i915: reorder setup sequence to have irqs for output setup Wrongly set-up interrupts also lead to broken hw-based load-detection on at least GM45, resulting in ghost VGA/TV-out outputs. To fix this, delay the hotplug register setup until after all outputs are set up, by moving it into a new dev_priv->display.hpd_irq_callback. We might also move the PCH_SPLIT platforms to such a setup eventually. Another funny part is that we need to delay the fbdev initial config probing until after the hpd regs are setup, for otherwise it'll detect ghost outputs. But we can only enable the hpd interrupt handling itself (and the output polling) _after_ that initial scan, due to massive locking brain-damage in the fbdev setup code. Add a big comment to explain this cute little dragon lair. v2: Encapsulate all the fbdev handling by wrapping the move call into intel_fbdev_initial_config in intel_fb.c. Requested by Chris Wilson. v3: Applied bikeshed from Jesse Barnes. v4: Imre Deak noticed that we also need to call intel_hpd_init after the drm_irqinstall calls in the gpu reset and resume paths - otherwise hotplug will be broken. Also improve the comment a bit about why hpd_init needs to be called before we set up the initial fbdev config. Bugzilla: Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=54943 Reported-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org> (v3) Reviewed-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-12-11 21:05:07 +08:00
void intel_hpd_init(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
if (dev_priv->display.hpd_irq_setup)
dev_priv->display.hpd_irq_setup(dev);
}