OpenCloudOS-Kernel/drivers/net/ethernet/marvell/prestera/prestera_hw.c

2166 lines
52 KiB
C
Raw Normal View History

net: marvell: prestera: Add driver for Prestera family ASIC devices Marvell Prestera 98DX326x integrates up to 24 ports of 1GbE with 8 ports of 10GbE uplinks or 2 ports of 40Gbps stacking for a largely wireless SMB deployment. The current implementation supports only boards designed for the Marvell Switchdev solution and requires special firmware. The core Prestera switching logic is implemented in prestera_main.c, there is an intermediate hw layer between core logic and firmware. It is implemented in prestera_hw.c, the purpose of it is to encapsulate hw related logic, in future there is a plan to support more devices with different HW related configurations. This patch contains only basic switch initialization and RX/TX support over SDMA mechanism. Currently supported devices have DMA access range <= 32bit and require ZONE_DMA to be enabled, for such cases SDMA driver checks if the skb allocated in proper range supported by the Prestera device. Also meanwhile there is no TX interrupt support in current firmware version so recycling work is scheduled on each xmit. Port's mac address is generated from the switch base mac which may be provided via device-tree (static one or as nvme cell), or randomly generated. This is required by the firmware. Co-developed-by: Andrii Savka <andrii.savka@plvision.eu> Signed-off-by: Andrii Savka <andrii.savka@plvision.eu> Co-developed-by: Oleksandr Mazur <oleksandr.mazur@plvision.eu> Signed-off-by: Oleksandr Mazur <oleksandr.mazur@plvision.eu> Co-developed-by: Serhiy Boiko <serhiy.boiko@plvision.eu> Signed-off-by: Serhiy Boiko <serhiy.boiko@plvision.eu> Co-developed-by: Serhiy Pshyk <serhiy.pshyk@plvision.eu> Signed-off-by: Serhiy Pshyk <serhiy.pshyk@plvision.eu> Co-developed-by: Taras Chornyi <taras.chornyi@plvision.eu> Signed-off-by: Taras Chornyi <taras.chornyi@plvision.eu> Co-developed-by: Volodymyr Mytnyk <volodymyr.mytnyk@plvision.eu> Signed-off-by: Volodymyr Mytnyk <volodymyr.mytnyk@plvision.eu> Signed-off-by: Vadym Kochan <vadym.kochan@plvision.eu> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-17 00:30:57 +08:00
// SPDX-License-Identifier: BSD-3-Clause OR GPL-2.0
/* Copyright (c) 2019-2020 Marvell International Ltd. All rights reserved */
#include <linux/etherdevice.h>
#include <linux/if_bridge.h>
net: marvell: prestera: Add driver for Prestera family ASIC devices Marvell Prestera 98DX326x integrates up to 24 ports of 1GbE with 8 ports of 10GbE uplinks or 2 ports of 40Gbps stacking for a largely wireless SMB deployment. The current implementation supports only boards designed for the Marvell Switchdev solution and requires special firmware. The core Prestera switching logic is implemented in prestera_main.c, there is an intermediate hw layer between core logic and firmware. It is implemented in prestera_hw.c, the purpose of it is to encapsulate hw related logic, in future there is a plan to support more devices with different HW related configurations. This patch contains only basic switch initialization and RX/TX support over SDMA mechanism. Currently supported devices have DMA access range <= 32bit and require ZONE_DMA to be enabled, for such cases SDMA driver checks if the skb allocated in proper range supported by the Prestera device. Also meanwhile there is no TX interrupt support in current firmware version so recycling work is scheduled on each xmit. Port's mac address is generated from the switch base mac which may be provided via device-tree (static one or as nvme cell), or randomly generated. This is required by the firmware. Co-developed-by: Andrii Savka <andrii.savka@plvision.eu> Signed-off-by: Andrii Savka <andrii.savka@plvision.eu> Co-developed-by: Oleksandr Mazur <oleksandr.mazur@plvision.eu> Signed-off-by: Oleksandr Mazur <oleksandr.mazur@plvision.eu> Co-developed-by: Serhiy Boiko <serhiy.boiko@plvision.eu> Signed-off-by: Serhiy Boiko <serhiy.boiko@plvision.eu> Co-developed-by: Serhiy Pshyk <serhiy.pshyk@plvision.eu> Signed-off-by: Serhiy Pshyk <serhiy.pshyk@plvision.eu> Co-developed-by: Taras Chornyi <taras.chornyi@plvision.eu> Signed-off-by: Taras Chornyi <taras.chornyi@plvision.eu> Co-developed-by: Volodymyr Mytnyk <volodymyr.mytnyk@plvision.eu> Signed-off-by: Volodymyr Mytnyk <volodymyr.mytnyk@plvision.eu> Signed-off-by: Vadym Kochan <vadym.kochan@plvision.eu> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-17 00:30:57 +08:00
#include <linux/ethtool.h>
#include <linux/list.h>
#include "prestera.h"
#include "prestera_hw.h"
#include "prestera_acl.h"
#include "prestera_counter.h"
net: marvell: prestera: Add driver for Prestera family ASIC devices Marvell Prestera 98DX326x integrates up to 24 ports of 1GbE with 8 ports of 10GbE uplinks or 2 ports of 40Gbps stacking for a largely wireless SMB deployment. The current implementation supports only boards designed for the Marvell Switchdev solution and requires special firmware. The core Prestera switching logic is implemented in prestera_main.c, there is an intermediate hw layer between core logic and firmware. It is implemented in prestera_hw.c, the purpose of it is to encapsulate hw related logic, in future there is a plan to support more devices with different HW related configurations. This patch contains only basic switch initialization and RX/TX support over SDMA mechanism. Currently supported devices have DMA access range <= 32bit and require ZONE_DMA to be enabled, for such cases SDMA driver checks if the skb allocated in proper range supported by the Prestera device. Also meanwhile there is no TX interrupt support in current firmware version so recycling work is scheduled on each xmit. Port's mac address is generated from the switch base mac which may be provided via device-tree (static one or as nvme cell), or randomly generated. This is required by the firmware. Co-developed-by: Andrii Savka <andrii.savka@plvision.eu> Signed-off-by: Andrii Savka <andrii.savka@plvision.eu> Co-developed-by: Oleksandr Mazur <oleksandr.mazur@plvision.eu> Signed-off-by: Oleksandr Mazur <oleksandr.mazur@plvision.eu> Co-developed-by: Serhiy Boiko <serhiy.boiko@plvision.eu> Signed-off-by: Serhiy Boiko <serhiy.boiko@plvision.eu> Co-developed-by: Serhiy Pshyk <serhiy.pshyk@plvision.eu> Signed-off-by: Serhiy Pshyk <serhiy.pshyk@plvision.eu> Co-developed-by: Taras Chornyi <taras.chornyi@plvision.eu> Signed-off-by: Taras Chornyi <taras.chornyi@plvision.eu> Co-developed-by: Volodymyr Mytnyk <volodymyr.mytnyk@plvision.eu> Signed-off-by: Volodymyr Mytnyk <volodymyr.mytnyk@plvision.eu> Signed-off-by: Vadym Kochan <vadym.kochan@plvision.eu> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-17 00:30:57 +08:00
#define PRESTERA_SWITCH_INIT_TIMEOUT_MS (30 * 1000)
#define PRESTERA_MIN_MTU 64
enum prestera_cmd_type_t {
PRESTERA_CMD_TYPE_SWITCH_INIT = 0x1,
PRESTERA_CMD_TYPE_SWITCH_ATTR_SET = 0x2,
PRESTERA_CMD_TYPE_PORT_ATTR_SET = 0x100,
PRESTERA_CMD_TYPE_PORT_ATTR_GET = 0x101,
PRESTERA_CMD_TYPE_PORT_INFO_GET = 0x110,
PRESTERA_CMD_TYPE_VLAN_CREATE = 0x200,
PRESTERA_CMD_TYPE_VLAN_DELETE = 0x201,
PRESTERA_CMD_TYPE_VLAN_PORT_SET = 0x202,
PRESTERA_CMD_TYPE_VLAN_PVID_SET = 0x203,
PRESTERA_CMD_TYPE_FDB_ADD = 0x300,
PRESTERA_CMD_TYPE_FDB_DELETE = 0x301,
PRESTERA_CMD_TYPE_FDB_FLUSH_PORT = 0x310,
PRESTERA_CMD_TYPE_FDB_FLUSH_VLAN = 0x311,
PRESTERA_CMD_TYPE_FDB_FLUSH_PORT_VLAN = 0x312,
PRESTERA_CMD_TYPE_BRIDGE_CREATE = 0x400,
PRESTERA_CMD_TYPE_BRIDGE_DELETE = 0x401,
PRESTERA_CMD_TYPE_BRIDGE_PORT_ADD = 0x402,
PRESTERA_CMD_TYPE_BRIDGE_PORT_DELETE = 0x403,
PRESTERA_CMD_TYPE_COUNTER_GET = 0x510,
PRESTERA_CMD_TYPE_COUNTER_ABORT = 0x511,
PRESTERA_CMD_TYPE_COUNTER_TRIGGER = 0x512,
PRESTERA_CMD_TYPE_COUNTER_BLOCK_GET = 0x513,
PRESTERA_CMD_TYPE_COUNTER_BLOCK_RELEASE = 0x514,
PRESTERA_CMD_TYPE_COUNTER_CLEAR = 0x515,
PRESTERA_CMD_TYPE_VTCAM_CREATE = 0x540,
PRESTERA_CMD_TYPE_VTCAM_DESTROY = 0x541,
PRESTERA_CMD_TYPE_VTCAM_RULE_ADD = 0x550,
PRESTERA_CMD_TYPE_VTCAM_RULE_DELETE = 0x551,
PRESTERA_CMD_TYPE_VTCAM_IFACE_BIND = 0x560,
PRESTERA_CMD_TYPE_VTCAM_IFACE_UNBIND = 0x561,
PRESTERA_CMD_TYPE_ROUTER_RIF_CREATE = 0x600,
PRESTERA_CMD_TYPE_ROUTER_RIF_DELETE = 0x601,
PRESTERA_CMD_TYPE_ROUTER_LPM_ADD = 0x610,
PRESTERA_CMD_TYPE_ROUTER_LPM_DELETE = 0x611,
PRESTERA_CMD_TYPE_ROUTER_VR_CREATE = 0x630,
PRESTERA_CMD_TYPE_ROUTER_VR_DELETE = 0x631,
net: marvell: prestera: Add driver for Prestera family ASIC devices Marvell Prestera 98DX326x integrates up to 24 ports of 1GbE with 8 ports of 10GbE uplinks or 2 ports of 40Gbps stacking for a largely wireless SMB deployment. The current implementation supports only boards designed for the Marvell Switchdev solution and requires special firmware. The core Prestera switching logic is implemented in prestera_main.c, there is an intermediate hw layer between core logic and firmware. It is implemented in prestera_hw.c, the purpose of it is to encapsulate hw related logic, in future there is a plan to support more devices with different HW related configurations. This patch contains only basic switch initialization and RX/TX support over SDMA mechanism. Currently supported devices have DMA access range <= 32bit and require ZONE_DMA to be enabled, for such cases SDMA driver checks if the skb allocated in proper range supported by the Prestera device. Also meanwhile there is no TX interrupt support in current firmware version so recycling work is scheduled on each xmit. Port's mac address is generated from the switch base mac which may be provided via device-tree (static one or as nvme cell), or randomly generated. This is required by the firmware. Co-developed-by: Andrii Savka <andrii.savka@plvision.eu> Signed-off-by: Andrii Savka <andrii.savka@plvision.eu> Co-developed-by: Oleksandr Mazur <oleksandr.mazur@plvision.eu> Signed-off-by: Oleksandr Mazur <oleksandr.mazur@plvision.eu> Co-developed-by: Serhiy Boiko <serhiy.boiko@plvision.eu> Signed-off-by: Serhiy Boiko <serhiy.boiko@plvision.eu> Co-developed-by: Serhiy Pshyk <serhiy.pshyk@plvision.eu> Signed-off-by: Serhiy Pshyk <serhiy.pshyk@plvision.eu> Co-developed-by: Taras Chornyi <taras.chornyi@plvision.eu> Signed-off-by: Taras Chornyi <taras.chornyi@plvision.eu> Co-developed-by: Volodymyr Mytnyk <volodymyr.mytnyk@plvision.eu> Signed-off-by: Volodymyr Mytnyk <volodymyr.mytnyk@plvision.eu> Signed-off-by: Vadym Kochan <vadym.kochan@plvision.eu> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-17 00:30:57 +08:00
PRESTERA_CMD_TYPE_RXTX_INIT = 0x800,
PRESTERA_CMD_TYPE_LAG_MEMBER_ADD = 0x900,
PRESTERA_CMD_TYPE_LAG_MEMBER_DELETE = 0x901,
PRESTERA_CMD_TYPE_LAG_MEMBER_ENABLE = 0x902,
PRESTERA_CMD_TYPE_LAG_MEMBER_DISABLE = 0x903,
PRESTERA_CMD_TYPE_STP_PORT_SET = 0x1000,
PRESTERA_CMD_TYPE_SPAN_GET = 0x1100,
PRESTERA_CMD_TYPE_SPAN_BIND = 0x1101,
PRESTERA_CMD_TYPE_SPAN_UNBIND = 0x1102,
PRESTERA_CMD_TYPE_SPAN_RELEASE = 0x1103,
PRESTERA_CMD_TYPE_CPU_CODE_COUNTERS_GET = 0x2000,
net: marvell: prestera: Add driver for Prestera family ASIC devices Marvell Prestera 98DX326x integrates up to 24 ports of 1GbE with 8 ports of 10GbE uplinks or 2 ports of 40Gbps stacking for a largely wireless SMB deployment. The current implementation supports only boards designed for the Marvell Switchdev solution and requires special firmware. The core Prestera switching logic is implemented in prestera_main.c, there is an intermediate hw layer between core logic and firmware. It is implemented in prestera_hw.c, the purpose of it is to encapsulate hw related logic, in future there is a plan to support more devices with different HW related configurations. This patch contains only basic switch initialization and RX/TX support over SDMA mechanism. Currently supported devices have DMA access range <= 32bit and require ZONE_DMA to be enabled, for such cases SDMA driver checks if the skb allocated in proper range supported by the Prestera device. Also meanwhile there is no TX interrupt support in current firmware version so recycling work is scheduled on each xmit. Port's mac address is generated from the switch base mac which may be provided via device-tree (static one or as nvme cell), or randomly generated. This is required by the firmware. Co-developed-by: Andrii Savka <andrii.savka@plvision.eu> Signed-off-by: Andrii Savka <andrii.savka@plvision.eu> Co-developed-by: Oleksandr Mazur <oleksandr.mazur@plvision.eu> Signed-off-by: Oleksandr Mazur <oleksandr.mazur@plvision.eu> Co-developed-by: Serhiy Boiko <serhiy.boiko@plvision.eu> Signed-off-by: Serhiy Boiko <serhiy.boiko@plvision.eu> Co-developed-by: Serhiy Pshyk <serhiy.pshyk@plvision.eu> Signed-off-by: Serhiy Pshyk <serhiy.pshyk@plvision.eu> Co-developed-by: Taras Chornyi <taras.chornyi@plvision.eu> Signed-off-by: Taras Chornyi <taras.chornyi@plvision.eu> Co-developed-by: Volodymyr Mytnyk <volodymyr.mytnyk@plvision.eu> Signed-off-by: Volodymyr Mytnyk <volodymyr.mytnyk@plvision.eu> Signed-off-by: Vadym Kochan <vadym.kochan@plvision.eu> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-17 00:30:57 +08:00
PRESTERA_CMD_TYPE_ACK = 0x10000,
PRESTERA_CMD_TYPE_MAX
};
enum {
PRESTERA_CMD_PORT_ATTR_ADMIN_STATE = 1,
PRESTERA_CMD_PORT_ATTR_MTU = 3,
PRESTERA_CMD_PORT_ATTR_MAC = 4,
PRESTERA_CMD_PORT_ATTR_SPEED = 5,
PRESTERA_CMD_PORT_ATTR_ACCEPT_FRAME_TYPE = 6,
PRESTERA_CMD_PORT_ATTR_LEARNING = 7,
PRESTERA_CMD_PORT_ATTR_FLOOD = 8,
net: marvell: prestera: Add driver for Prestera family ASIC devices Marvell Prestera 98DX326x integrates up to 24 ports of 1GbE with 8 ports of 10GbE uplinks or 2 ports of 40Gbps stacking for a largely wireless SMB deployment. The current implementation supports only boards designed for the Marvell Switchdev solution and requires special firmware. The core Prestera switching logic is implemented in prestera_main.c, there is an intermediate hw layer between core logic and firmware. It is implemented in prestera_hw.c, the purpose of it is to encapsulate hw related logic, in future there is a plan to support more devices with different HW related configurations. This patch contains only basic switch initialization and RX/TX support over SDMA mechanism. Currently supported devices have DMA access range <= 32bit and require ZONE_DMA to be enabled, for such cases SDMA driver checks if the skb allocated in proper range supported by the Prestera device. Also meanwhile there is no TX interrupt support in current firmware version so recycling work is scheduled on each xmit. Port's mac address is generated from the switch base mac which may be provided via device-tree (static one or as nvme cell), or randomly generated. This is required by the firmware. Co-developed-by: Andrii Savka <andrii.savka@plvision.eu> Signed-off-by: Andrii Savka <andrii.savka@plvision.eu> Co-developed-by: Oleksandr Mazur <oleksandr.mazur@plvision.eu> Signed-off-by: Oleksandr Mazur <oleksandr.mazur@plvision.eu> Co-developed-by: Serhiy Boiko <serhiy.boiko@plvision.eu> Signed-off-by: Serhiy Boiko <serhiy.boiko@plvision.eu> Co-developed-by: Serhiy Pshyk <serhiy.pshyk@plvision.eu> Signed-off-by: Serhiy Pshyk <serhiy.pshyk@plvision.eu> Co-developed-by: Taras Chornyi <taras.chornyi@plvision.eu> Signed-off-by: Taras Chornyi <taras.chornyi@plvision.eu> Co-developed-by: Volodymyr Mytnyk <volodymyr.mytnyk@plvision.eu> Signed-off-by: Volodymyr Mytnyk <volodymyr.mytnyk@plvision.eu> Signed-off-by: Vadym Kochan <vadym.kochan@plvision.eu> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-17 00:30:57 +08:00
PRESTERA_CMD_PORT_ATTR_CAPABILITY = 9,
net: marvell: prestera: add firmware v4.0 support Add firmware (FW) version 4.0 support for Marvell Prestera driver. Major changes have been made to new v4.0 FW ABI to add support of new features, introduce the stability of the FW ABI and ensure better forward compatibility for the future driver vesrions. Current v4.0 FW feature set support does not expect any changes to ABI, as it was defined and tested through long period of time. The ABI may be extended in case of new features, but it will not break the backward compatibility. ABI major changes done in v4.0: - L1 ABI, where MAC and PHY API configuration are split. - ACL has been split to low-level TCAM and Counters ABI to provide more HW ACL capabilities for future driver versions. To support backward support, the addition compatibility layer is required in the driver which will have two different codebase under "if FW-VER elif FW-VER else" conditions that will be removed in the future anyway, So, the idea was to break backward support and focus on more stable FW instead of supporting old version with very minimal and limited set of features/capabilities. Improve FW msg validation: * Use __le64, __le32, __le16 types in msg to/from FW to catch endian mismatch by sparse. * Use BUILD_BUG_ON for structures sent/recv to/from FW. Co-developed-by: Vadym Kochan <vkochan@marvell.com> Signed-off-by: Vadym Kochan <vkochan@marvell.com> Signed-off-by: Yevhen Orlov <yevhen.orlov@plvision.eu> Signed-off-by: Taras Chornyi <tchornyi@marvell.com> Signed-off-by: Volodymyr Mytnyk <vmytnyk@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-29 13:38:07 +08:00
PRESTERA_CMD_PORT_ATTR_PHY_MODE = 12,
PRESTERA_CMD_PORT_ATTR_TYPE = 13,
net: marvell: prestera: Add driver for Prestera family ASIC devices Marvell Prestera 98DX326x integrates up to 24 ports of 1GbE with 8 ports of 10GbE uplinks or 2 ports of 40Gbps stacking for a largely wireless SMB deployment. The current implementation supports only boards designed for the Marvell Switchdev solution and requires special firmware. The core Prestera switching logic is implemented in prestera_main.c, there is an intermediate hw layer between core logic and firmware. It is implemented in prestera_hw.c, the purpose of it is to encapsulate hw related logic, in future there is a plan to support more devices with different HW related configurations. This patch contains only basic switch initialization and RX/TX support over SDMA mechanism. Currently supported devices have DMA access range <= 32bit and require ZONE_DMA to be enabled, for such cases SDMA driver checks if the skb allocated in proper range supported by the Prestera device. Also meanwhile there is no TX interrupt support in current firmware version so recycling work is scheduled on each xmit. Port's mac address is generated from the switch base mac which may be provided via device-tree (static one or as nvme cell), or randomly generated. This is required by the firmware. Co-developed-by: Andrii Savka <andrii.savka@plvision.eu> Signed-off-by: Andrii Savka <andrii.savka@plvision.eu> Co-developed-by: Oleksandr Mazur <oleksandr.mazur@plvision.eu> Signed-off-by: Oleksandr Mazur <oleksandr.mazur@plvision.eu> Co-developed-by: Serhiy Boiko <serhiy.boiko@plvision.eu> Signed-off-by: Serhiy Boiko <serhiy.boiko@plvision.eu> Co-developed-by: Serhiy Pshyk <serhiy.pshyk@plvision.eu> Signed-off-by: Serhiy Pshyk <serhiy.pshyk@plvision.eu> Co-developed-by: Taras Chornyi <taras.chornyi@plvision.eu> Signed-off-by: Taras Chornyi <taras.chornyi@plvision.eu> Co-developed-by: Volodymyr Mytnyk <volodymyr.mytnyk@plvision.eu> Signed-off-by: Volodymyr Mytnyk <volodymyr.mytnyk@plvision.eu> Signed-off-by: Vadym Kochan <vadym.kochan@plvision.eu> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-17 00:30:57 +08:00
PRESTERA_CMD_PORT_ATTR_STATS = 17,
net: marvell: prestera: add firmware v4.0 support Add firmware (FW) version 4.0 support for Marvell Prestera driver. Major changes have been made to new v4.0 FW ABI to add support of new features, introduce the stability of the FW ABI and ensure better forward compatibility for the future driver vesrions. Current v4.0 FW feature set support does not expect any changes to ABI, as it was defined and tested through long period of time. The ABI may be extended in case of new features, but it will not break the backward compatibility. ABI major changes done in v4.0: - L1 ABI, where MAC and PHY API configuration are split. - ACL has been split to low-level TCAM and Counters ABI to provide more HW ACL capabilities for future driver versions. To support backward support, the addition compatibility layer is required in the driver which will have two different codebase under "if FW-VER elif FW-VER else" conditions that will be removed in the future anyway, So, the idea was to break backward support and focus on more stable FW instead of supporting old version with very minimal and limited set of features/capabilities. Improve FW msg validation: * Use __le64, __le32, __le16 types in msg to/from FW to catch endian mismatch by sparse. * Use BUILD_BUG_ON for structures sent/recv to/from FW. Co-developed-by: Vadym Kochan <vkochan@marvell.com> Signed-off-by: Vadym Kochan <vkochan@marvell.com> Signed-off-by: Yevhen Orlov <yevhen.orlov@plvision.eu> Signed-off-by: Taras Chornyi <tchornyi@marvell.com> Signed-off-by: Volodymyr Mytnyk <vmytnyk@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-29 13:38:07 +08:00
PRESTERA_CMD_PORT_ATTR_MAC_AUTONEG_RESTART = 18,
PRESTERA_CMD_PORT_ATTR_PHY_AUTONEG_RESTART = 19,
PRESTERA_CMD_PORT_ATTR_MAC_MODE = 22,
net: marvell: prestera: Add driver for Prestera family ASIC devices Marvell Prestera 98DX326x integrates up to 24 ports of 1GbE with 8 ports of 10GbE uplinks or 2 ports of 40Gbps stacking for a largely wireless SMB deployment. The current implementation supports only boards designed for the Marvell Switchdev solution and requires special firmware. The core Prestera switching logic is implemented in prestera_main.c, there is an intermediate hw layer between core logic and firmware. It is implemented in prestera_hw.c, the purpose of it is to encapsulate hw related logic, in future there is a plan to support more devices with different HW related configurations. This patch contains only basic switch initialization and RX/TX support over SDMA mechanism. Currently supported devices have DMA access range <= 32bit and require ZONE_DMA to be enabled, for such cases SDMA driver checks if the skb allocated in proper range supported by the Prestera device. Also meanwhile there is no TX interrupt support in current firmware version so recycling work is scheduled on each xmit. Port's mac address is generated from the switch base mac which may be provided via device-tree (static one or as nvme cell), or randomly generated. This is required by the firmware. Co-developed-by: Andrii Savka <andrii.savka@plvision.eu> Signed-off-by: Andrii Savka <andrii.savka@plvision.eu> Co-developed-by: Oleksandr Mazur <oleksandr.mazur@plvision.eu> Signed-off-by: Oleksandr Mazur <oleksandr.mazur@plvision.eu> Co-developed-by: Serhiy Boiko <serhiy.boiko@plvision.eu> Signed-off-by: Serhiy Boiko <serhiy.boiko@plvision.eu> Co-developed-by: Serhiy Pshyk <serhiy.pshyk@plvision.eu> Signed-off-by: Serhiy Pshyk <serhiy.pshyk@plvision.eu> Co-developed-by: Taras Chornyi <taras.chornyi@plvision.eu> Signed-off-by: Taras Chornyi <taras.chornyi@plvision.eu> Co-developed-by: Volodymyr Mytnyk <volodymyr.mytnyk@plvision.eu> Signed-off-by: Volodymyr Mytnyk <volodymyr.mytnyk@plvision.eu> Signed-off-by: Vadym Kochan <vadym.kochan@plvision.eu> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-17 00:30:57 +08:00
};
enum {
PRESTERA_CMD_SWITCH_ATTR_MAC = 1,
PRESTERA_CMD_SWITCH_ATTR_AGEING = 2,
net: marvell: prestera: Add driver for Prestera family ASIC devices Marvell Prestera 98DX326x integrates up to 24 ports of 1GbE with 8 ports of 10GbE uplinks or 2 ports of 40Gbps stacking for a largely wireless SMB deployment. The current implementation supports only boards designed for the Marvell Switchdev solution and requires special firmware. The core Prestera switching logic is implemented in prestera_main.c, there is an intermediate hw layer between core logic and firmware. It is implemented in prestera_hw.c, the purpose of it is to encapsulate hw related logic, in future there is a plan to support more devices with different HW related configurations. This patch contains only basic switch initialization and RX/TX support over SDMA mechanism. Currently supported devices have DMA access range <= 32bit and require ZONE_DMA to be enabled, for such cases SDMA driver checks if the skb allocated in proper range supported by the Prestera device. Also meanwhile there is no TX interrupt support in current firmware version so recycling work is scheduled on each xmit. Port's mac address is generated from the switch base mac which may be provided via device-tree (static one or as nvme cell), or randomly generated. This is required by the firmware. Co-developed-by: Andrii Savka <andrii.savka@plvision.eu> Signed-off-by: Andrii Savka <andrii.savka@plvision.eu> Co-developed-by: Oleksandr Mazur <oleksandr.mazur@plvision.eu> Signed-off-by: Oleksandr Mazur <oleksandr.mazur@plvision.eu> Co-developed-by: Serhiy Boiko <serhiy.boiko@plvision.eu> Signed-off-by: Serhiy Boiko <serhiy.boiko@plvision.eu> Co-developed-by: Serhiy Pshyk <serhiy.pshyk@plvision.eu> Signed-off-by: Serhiy Pshyk <serhiy.pshyk@plvision.eu> Co-developed-by: Taras Chornyi <taras.chornyi@plvision.eu> Signed-off-by: Taras Chornyi <taras.chornyi@plvision.eu> Co-developed-by: Volodymyr Mytnyk <volodymyr.mytnyk@plvision.eu> Signed-off-by: Volodymyr Mytnyk <volodymyr.mytnyk@plvision.eu> Signed-off-by: Vadym Kochan <vadym.kochan@plvision.eu> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-17 00:30:57 +08:00
};
enum {
PRESTERA_CMD_ACK_OK,
PRESTERA_CMD_ACK_FAILED,
PRESTERA_CMD_ACK_MAX
};
enum {
PRESTERA_PORT_TP_NA,
PRESTERA_PORT_TP_MDI,
PRESTERA_PORT_TP_MDIX,
PRESTERA_PORT_TP_AUTO,
};
enum {
PRESTERA_PORT_FLOOD_TYPE_UC = 0,
PRESTERA_PORT_FLOOD_TYPE_MC = 1,
};
net: marvell: prestera: Add driver for Prestera family ASIC devices Marvell Prestera 98DX326x integrates up to 24 ports of 1GbE with 8 ports of 10GbE uplinks or 2 ports of 40Gbps stacking for a largely wireless SMB deployment. The current implementation supports only boards designed for the Marvell Switchdev solution and requires special firmware. The core Prestera switching logic is implemented in prestera_main.c, there is an intermediate hw layer between core logic and firmware. It is implemented in prestera_hw.c, the purpose of it is to encapsulate hw related logic, in future there is a plan to support more devices with different HW related configurations. This patch contains only basic switch initialization and RX/TX support over SDMA mechanism. Currently supported devices have DMA access range <= 32bit and require ZONE_DMA to be enabled, for such cases SDMA driver checks if the skb allocated in proper range supported by the Prestera device. Also meanwhile there is no TX interrupt support in current firmware version so recycling work is scheduled on each xmit. Port's mac address is generated from the switch base mac which may be provided via device-tree (static one or as nvme cell), or randomly generated. This is required by the firmware. Co-developed-by: Andrii Savka <andrii.savka@plvision.eu> Signed-off-by: Andrii Savka <andrii.savka@plvision.eu> Co-developed-by: Oleksandr Mazur <oleksandr.mazur@plvision.eu> Signed-off-by: Oleksandr Mazur <oleksandr.mazur@plvision.eu> Co-developed-by: Serhiy Boiko <serhiy.boiko@plvision.eu> Signed-off-by: Serhiy Boiko <serhiy.boiko@plvision.eu> Co-developed-by: Serhiy Pshyk <serhiy.pshyk@plvision.eu> Signed-off-by: Serhiy Pshyk <serhiy.pshyk@plvision.eu> Co-developed-by: Taras Chornyi <taras.chornyi@plvision.eu> Signed-off-by: Taras Chornyi <taras.chornyi@plvision.eu> Co-developed-by: Volodymyr Mytnyk <volodymyr.mytnyk@plvision.eu> Signed-off-by: Volodymyr Mytnyk <volodymyr.mytnyk@plvision.eu> Signed-off-by: Vadym Kochan <vadym.kochan@plvision.eu> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-17 00:30:57 +08:00
enum {
PRESTERA_PORT_GOOD_OCTETS_RCV_CNT,
PRESTERA_PORT_BAD_OCTETS_RCV_CNT,
PRESTERA_PORT_MAC_TRANSMIT_ERR_CNT,
PRESTERA_PORT_BRDC_PKTS_RCV_CNT,
PRESTERA_PORT_MC_PKTS_RCV_CNT,
PRESTERA_PORT_PKTS_64L_CNT,
PRESTERA_PORT_PKTS_65TO127L_CNT,
PRESTERA_PORT_PKTS_128TO255L_CNT,
PRESTERA_PORT_PKTS_256TO511L_CNT,
PRESTERA_PORT_PKTS_512TO1023L_CNT,
PRESTERA_PORT_PKTS_1024TOMAXL_CNT,
PRESTERA_PORT_EXCESSIVE_COLLISIONS_CNT,
PRESTERA_PORT_MC_PKTS_SENT_CNT,
PRESTERA_PORT_BRDC_PKTS_SENT_CNT,
PRESTERA_PORT_FC_SENT_CNT,
PRESTERA_PORT_GOOD_FC_RCV_CNT,
PRESTERA_PORT_DROP_EVENTS_CNT,
PRESTERA_PORT_UNDERSIZE_PKTS_CNT,
PRESTERA_PORT_FRAGMENTS_PKTS_CNT,
PRESTERA_PORT_OVERSIZE_PKTS_CNT,
PRESTERA_PORT_JABBER_PKTS_CNT,
PRESTERA_PORT_MAC_RCV_ERROR_CNT,
PRESTERA_PORT_BAD_CRC_CNT,
PRESTERA_PORT_COLLISIONS_CNT,
PRESTERA_PORT_LATE_COLLISIONS_CNT,
PRESTERA_PORT_GOOD_UC_PKTS_RCV_CNT,
PRESTERA_PORT_GOOD_UC_PKTS_SENT_CNT,
PRESTERA_PORT_MULTIPLE_PKTS_SENT_CNT,
PRESTERA_PORT_DEFERRED_PKTS_SENT_CNT,
PRESTERA_PORT_GOOD_OCTETS_SENT_CNT,
PRESTERA_PORT_CNT_MAX
};
enum {
PRESTERA_FC_NONE,
PRESTERA_FC_SYMMETRIC,
PRESTERA_FC_ASYMMETRIC,
PRESTERA_FC_SYMM_ASYMM,
};
enum {
PRESTERA_HW_FDB_ENTRY_TYPE_REG_PORT = 0,
PRESTERA_HW_FDB_ENTRY_TYPE_LAG = 1,
PRESTERA_HW_FDB_ENTRY_TYPE_MAX = 2,
};
net: marvell: prestera: Add driver for Prestera family ASIC devices Marvell Prestera 98DX326x integrates up to 24 ports of 1GbE with 8 ports of 10GbE uplinks or 2 ports of 40Gbps stacking for a largely wireless SMB deployment. The current implementation supports only boards designed for the Marvell Switchdev solution and requires special firmware. The core Prestera switching logic is implemented in prestera_main.c, there is an intermediate hw layer between core logic and firmware. It is implemented in prestera_hw.c, the purpose of it is to encapsulate hw related logic, in future there is a plan to support more devices with different HW related configurations. This patch contains only basic switch initialization and RX/TX support over SDMA mechanism. Currently supported devices have DMA access range <= 32bit and require ZONE_DMA to be enabled, for such cases SDMA driver checks if the skb allocated in proper range supported by the Prestera device. Also meanwhile there is no TX interrupt support in current firmware version so recycling work is scheduled on each xmit. Port's mac address is generated from the switch base mac which may be provided via device-tree (static one or as nvme cell), or randomly generated. This is required by the firmware. Co-developed-by: Andrii Savka <andrii.savka@plvision.eu> Signed-off-by: Andrii Savka <andrii.savka@plvision.eu> Co-developed-by: Oleksandr Mazur <oleksandr.mazur@plvision.eu> Signed-off-by: Oleksandr Mazur <oleksandr.mazur@plvision.eu> Co-developed-by: Serhiy Boiko <serhiy.boiko@plvision.eu> Signed-off-by: Serhiy Boiko <serhiy.boiko@plvision.eu> Co-developed-by: Serhiy Pshyk <serhiy.pshyk@plvision.eu> Signed-off-by: Serhiy Pshyk <serhiy.pshyk@plvision.eu> Co-developed-by: Taras Chornyi <taras.chornyi@plvision.eu> Signed-off-by: Taras Chornyi <taras.chornyi@plvision.eu> Co-developed-by: Volodymyr Mytnyk <volodymyr.mytnyk@plvision.eu> Signed-off-by: Volodymyr Mytnyk <volodymyr.mytnyk@plvision.eu> Signed-off-by: Vadym Kochan <vadym.kochan@plvision.eu> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-17 00:30:57 +08:00
struct prestera_fw_event_handler {
struct list_head list;
struct rcu_head rcu;
enum prestera_event_type type;
prestera_event_cb_t func;
void *arg;
};
struct prestera_msg_cmd {
net: marvell: prestera: add firmware v4.0 support Add firmware (FW) version 4.0 support for Marvell Prestera driver. Major changes have been made to new v4.0 FW ABI to add support of new features, introduce the stability of the FW ABI and ensure better forward compatibility for the future driver vesrions. Current v4.0 FW feature set support does not expect any changes to ABI, as it was defined and tested through long period of time. The ABI may be extended in case of new features, but it will not break the backward compatibility. ABI major changes done in v4.0: - L1 ABI, where MAC and PHY API configuration are split. - ACL has been split to low-level TCAM and Counters ABI to provide more HW ACL capabilities for future driver versions. To support backward support, the addition compatibility layer is required in the driver which will have two different codebase under "if FW-VER elif FW-VER else" conditions that will be removed in the future anyway, So, the idea was to break backward support and focus on more stable FW instead of supporting old version with very minimal and limited set of features/capabilities. Improve FW msg validation: * Use __le64, __le32, __le16 types in msg to/from FW to catch endian mismatch by sparse. * Use BUILD_BUG_ON for structures sent/recv to/from FW. Co-developed-by: Vadym Kochan <vkochan@marvell.com> Signed-off-by: Vadym Kochan <vkochan@marvell.com> Signed-off-by: Yevhen Orlov <yevhen.orlov@plvision.eu> Signed-off-by: Taras Chornyi <tchornyi@marvell.com> Signed-off-by: Volodymyr Mytnyk <vmytnyk@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-29 13:38:07 +08:00
__le32 type;
net: marvell: prestera: Add driver for Prestera family ASIC devices Marvell Prestera 98DX326x integrates up to 24 ports of 1GbE with 8 ports of 10GbE uplinks or 2 ports of 40Gbps stacking for a largely wireless SMB deployment. The current implementation supports only boards designed for the Marvell Switchdev solution and requires special firmware. The core Prestera switching logic is implemented in prestera_main.c, there is an intermediate hw layer between core logic and firmware. It is implemented in prestera_hw.c, the purpose of it is to encapsulate hw related logic, in future there is a plan to support more devices with different HW related configurations. This patch contains only basic switch initialization and RX/TX support over SDMA mechanism. Currently supported devices have DMA access range <= 32bit and require ZONE_DMA to be enabled, for such cases SDMA driver checks if the skb allocated in proper range supported by the Prestera device. Also meanwhile there is no TX interrupt support in current firmware version so recycling work is scheduled on each xmit. Port's mac address is generated from the switch base mac which may be provided via device-tree (static one or as nvme cell), or randomly generated. This is required by the firmware. Co-developed-by: Andrii Savka <andrii.savka@plvision.eu> Signed-off-by: Andrii Savka <andrii.savka@plvision.eu> Co-developed-by: Oleksandr Mazur <oleksandr.mazur@plvision.eu> Signed-off-by: Oleksandr Mazur <oleksandr.mazur@plvision.eu> Co-developed-by: Serhiy Boiko <serhiy.boiko@plvision.eu> Signed-off-by: Serhiy Boiko <serhiy.boiko@plvision.eu> Co-developed-by: Serhiy Pshyk <serhiy.pshyk@plvision.eu> Signed-off-by: Serhiy Pshyk <serhiy.pshyk@plvision.eu> Co-developed-by: Taras Chornyi <taras.chornyi@plvision.eu> Signed-off-by: Taras Chornyi <taras.chornyi@plvision.eu> Co-developed-by: Volodymyr Mytnyk <volodymyr.mytnyk@plvision.eu> Signed-off-by: Volodymyr Mytnyk <volodymyr.mytnyk@plvision.eu> Signed-off-by: Vadym Kochan <vadym.kochan@plvision.eu> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-17 00:30:57 +08:00
};
struct prestera_msg_ret {
struct prestera_msg_cmd cmd;
net: marvell: prestera: add firmware v4.0 support Add firmware (FW) version 4.0 support for Marvell Prestera driver. Major changes have been made to new v4.0 FW ABI to add support of new features, introduce the stability of the FW ABI and ensure better forward compatibility for the future driver vesrions. Current v4.0 FW feature set support does not expect any changes to ABI, as it was defined and tested through long period of time. The ABI may be extended in case of new features, but it will not break the backward compatibility. ABI major changes done in v4.0: - L1 ABI, where MAC and PHY API configuration are split. - ACL has been split to low-level TCAM and Counters ABI to provide more HW ACL capabilities for future driver versions. To support backward support, the addition compatibility layer is required in the driver which will have two different codebase under "if FW-VER elif FW-VER else" conditions that will be removed in the future anyway, So, the idea was to break backward support and focus on more stable FW instead of supporting old version with very minimal and limited set of features/capabilities. Improve FW msg validation: * Use __le64, __le32, __le16 types in msg to/from FW to catch endian mismatch by sparse. * Use BUILD_BUG_ON for structures sent/recv to/from FW. Co-developed-by: Vadym Kochan <vkochan@marvell.com> Signed-off-by: Vadym Kochan <vkochan@marvell.com> Signed-off-by: Yevhen Orlov <yevhen.orlov@plvision.eu> Signed-off-by: Taras Chornyi <tchornyi@marvell.com> Signed-off-by: Volodymyr Mytnyk <vmytnyk@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-29 13:38:07 +08:00
__le32 status;
net: marvell: prestera: Add driver for Prestera family ASIC devices Marvell Prestera 98DX326x integrates up to 24 ports of 1GbE with 8 ports of 10GbE uplinks or 2 ports of 40Gbps stacking for a largely wireless SMB deployment. The current implementation supports only boards designed for the Marvell Switchdev solution and requires special firmware. The core Prestera switching logic is implemented in prestera_main.c, there is an intermediate hw layer between core logic and firmware. It is implemented in prestera_hw.c, the purpose of it is to encapsulate hw related logic, in future there is a plan to support more devices with different HW related configurations. This patch contains only basic switch initialization and RX/TX support over SDMA mechanism. Currently supported devices have DMA access range <= 32bit and require ZONE_DMA to be enabled, for such cases SDMA driver checks if the skb allocated in proper range supported by the Prestera device. Also meanwhile there is no TX interrupt support in current firmware version so recycling work is scheduled on each xmit. Port's mac address is generated from the switch base mac which may be provided via device-tree (static one or as nvme cell), or randomly generated. This is required by the firmware. Co-developed-by: Andrii Savka <andrii.savka@plvision.eu> Signed-off-by: Andrii Savka <andrii.savka@plvision.eu> Co-developed-by: Oleksandr Mazur <oleksandr.mazur@plvision.eu> Signed-off-by: Oleksandr Mazur <oleksandr.mazur@plvision.eu> Co-developed-by: Serhiy Boiko <serhiy.boiko@plvision.eu> Signed-off-by: Serhiy Boiko <serhiy.boiko@plvision.eu> Co-developed-by: Serhiy Pshyk <serhiy.pshyk@plvision.eu> Signed-off-by: Serhiy Pshyk <serhiy.pshyk@plvision.eu> Co-developed-by: Taras Chornyi <taras.chornyi@plvision.eu> Signed-off-by: Taras Chornyi <taras.chornyi@plvision.eu> Co-developed-by: Volodymyr Mytnyk <volodymyr.mytnyk@plvision.eu> Signed-off-by: Volodymyr Mytnyk <volodymyr.mytnyk@plvision.eu> Signed-off-by: Vadym Kochan <vadym.kochan@plvision.eu> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-17 00:30:57 +08:00
};
struct prestera_msg_common_req {
struct prestera_msg_cmd cmd;
};
struct prestera_msg_common_resp {
struct prestera_msg_ret ret;
};
struct prestera_msg_switch_attr_req {
struct prestera_msg_cmd cmd;
net: marvell: prestera: add firmware v4.0 support Add firmware (FW) version 4.0 support for Marvell Prestera driver. Major changes have been made to new v4.0 FW ABI to add support of new features, introduce the stability of the FW ABI and ensure better forward compatibility for the future driver vesrions. Current v4.0 FW feature set support does not expect any changes to ABI, as it was defined and tested through long period of time. The ABI may be extended in case of new features, but it will not break the backward compatibility. ABI major changes done in v4.0: - L1 ABI, where MAC and PHY API configuration are split. - ACL has been split to low-level TCAM and Counters ABI to provide more HW ACL capabilities for future driver versions. To support backward support, the addition compatibility layer is required in the driver which will have two different codebase under "if FW-VER elif FW-VER else" conditions that will be removed in the future anyway, So, the idea was to break backward support and focus on more stable FW instead of supporting old version with very minimal and limited set of features/capabilities. Improve FW msg validation: * Use __le64, __le32, __le16 types in msg to/from FW to catch endian mismatch by sparse. * Use BUILD_BUG_ON for structures sent/recv to/from FW. Co-developed-by: Vadym Kochan <vkochan@marvell.com> Signed-off-by: Vadym Kochan <vkochan@marvell.com> Signed-off-by: Yevhen Orlov <yevhen.orlov@plvision.eu> Signed-off-by: Taras Chornyi <tchornyi@marvell.com> Signed-off-by: Volodymyr Mytnyk <vmytnyk@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-29 13:38:07 +08:00
__le32 attr;
union {
__le32 ageing_timeout_ms;
struct {
u8 mac[ETH_ALEN];
u8 __pad[2];
};
} param;
net: marvell: prestera: Add driver for Prestera family ASIC devices Marvell Prestera 98DX326x integrates up to 24 ports of 1GbE with 8 ports of 10GbE uplinks or 2 ports of 40Gbps stacking for a largely wireless SMB deployment. The current implementation supports only boards designed for the Marvell Switchdev solution and requires special firmware. The core Prestera switching logic is implemented in prestera_main.c, there is an intermediate hw layer between core logic and firmware. It is implemented in prestera_hw.c, the purpose of it is to encapsulate hw related logic, in future there is a plan to support more devices with different HW related configurations. This patch contains only basic switch initialization and RX/TX support over SDMA mechanism. Currently supported devices have DMA access range <= 32bit and require ZONE_DMA to be enabled, for such cases SDMA driver checks if the skb allocated in proper range supported by the Prestera device. Also meanwhile there is no TX interrupt support in current firmware version so recycling work is scheduled on each xmit. Port's mac address is generated from the switch base mac which may be provided via device-tree (static one or as nvme cell), or randomly generated. This is required by the firmware. Co-developed-by: Andrii Savka <andrii.savka@plvision.eu> Signed-off-by: Andrii Savka <andrii.savka@plvision.eu> Co-developed-by: Oleksandr Mazur <oleksandr.mazur@plvision.eu> Signed-off-by: Oleksandr Mazur <oleksandr.mazur@plvision.eu> Co-developed-by: Serhiy Boiko <serhiy.boiko@plvision.eu> Signed-off-by: Serhiy Boiko <serhiy.boiko@plvision.eu> Co-developed-by: Serhiy Pshyk <serhiy.pshyk@plvision.eu> Signed-off-by: Serhiy Pshyk <serhiy.pshyk@plvision.eu> Co-developed-by: Taras Chornyi <taras.chornyi@plvision.eu> Signed-off-by: Taras Chornyi <taras.chornyi@plvision.eu> Co-developed-by: Volodymyr Mytnyk <volodymyr.mytnyk@plvision.eu> Signed-off-by: Volodymyr Mytnyk <volodymyr.mytnyk@plvision.eu> Signed-off-by: Vadym Kochan <vadym.kochan@plvision.eu> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-17 00:30:57 +08:00
};
struct prestera_msg_switch_init_resp {
struct prestera_msg_ret ret;
net: marvell: prestera: add firmware v4.0 support Add firmware (FW) version 4.0 support for Marvell Prestera driver. Major changes have been made to new v4.0 FW ABI to add support of new features, introduce the stability of the FW ABI and ensure better forward compatibility for the future driver vesrions. Current v4.0 FW feature set support does not expect any changes to ABI, as it was defined and tested through long period of time. The ABI may be extended in case of new features, but it will not break the backward compatibility. ABI major changes done in v4.0: - L1 ABI, where MAC and PHY API configuration are split. - ACL has been split to low-level TCAM and Counters ABI to provide more HW ACL capabilities for future driver versions. To support backward support, the addition compatibility layer is required in the driver which will have two different codebase under "if FW-VER elif FW-VER else" conditions that will be removed in the future anyway, So, the idea was to break backward support and focus on more stable FW instead of supporting old version with very minimal and limited set of features/capabilities. Improve FW msg validation: * Use __le64, __le32, __le16 types in msg to/from FW to catch endian mismatch by sparse. * Use BUILD_BUG_ON for structures sent/recv to/from FW. Co-developed-by: Vadym Kochan <vkochan@marvell.com> Signed-off-by: Vadym Kochan <vkochan@marvell.com> Signed-off-by: Yevhen Orlov <yevhen.orlov@plvision.eu> Signed-off-by: Taras Chornyi <tchornyi@marvell.com> Signed-off-by: Volodymyr Mytnyk <vmytnyk@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-29 13:38:07 +08:00
__le32 port_count;
__le32 mtu_max;
__le32 size_tbl_router_nexthop;
u8 switch_id;
u8 lag_max;
u8 lag_member_max;
};
net: marvell: prestera: Add driver for Prestera family ASIC devices Marvell Prestera 98DX326x integrates up to 24 ports of 1GbE with 8 ports of 10GbE uplinks or 2 ports of 40Gbps stacking for a largely wireless SMB deployment. The current implementation supports only boards designed for the Marvell Switchdev solution and requires special firmware. The core Prestera switching logic is implemented in prestera_main.c, there is an intermediate hw layer between core logic and firmware. It is implemented in prestera_hw.c, the purpose of it is to encapsulate hw related logic, in future there is a plan to support more devices with different HW related configurations. This patch contains only basic switch initialization and RX/TX support over SDMA mechanism. Currently supported devices have DMA access range <= 32bit and require ZONE_DMA to be enabled, for such cases SDMA driver checks if the skb allocated in proper range supported by the Prestera device. Also meanwhile there is no TX interrupt support in current firmware version so recycling work is scheduled on each xmit. Port's mac address is generated from the switch base mac which may be provided via device-tree (static one or as nvme cell), or randomly generated. This is required by the firmware. Co-developed-by: Andrii Savka <andrii.savka@plvision.eu> Signed-off-by: Andrii Savka <andrii.savka@plvision.eu> Co-developed-by: Oleksandr Mazur <oleksandr.mazur@plvision.eu> Signed-off-by: Oleksandr Mazur <oleksandr.mazur@plvision.eu> Co-developed-by: Serhiy Boiko <serhiy.boiko@plvision.eu> Signed-off-by: Serhiy Boiko <serhiy.boiko@plvision.eu> Co-developed-by: Serhiy Pshyk <serhiy.pshyk@plvision.eu> Signed-off-by: Serhiy Pshyk <serhiy.pshyk@plvision.eu> Co-developed-by: Taras Chornyi <taras.chornyi@plvision.eu> Signed-off-by: Taras Chornyi <taras.chornyi@plvision.eu> Co-developed-by: Volodymyr Mytnyk <volodymyr.mytnyk@plvision.eu> Signed-off-by: Volodymyr Mytnyk <volodymyr.mytnyk@plvision.eu> Signed-off-by: Vadym Kochan <vadym.kochan@plvision.eu> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-17 00:30:57 +08:00
net: marvell: prestera: add firmware v4.0 support Add firmware (FW) version 4.0 support for Marvell Prestera driver. Major changes have been made to new v4.0 FW ABI to add support of new features, introduce the stability of the FW ABI and ensure better forward compatibility for the future driver vesrions. Current v4.0 FW feature set support does not expect any changes to ABI, as it was defined and tested through long period of time. The ABI may be extended in case of new features, but it will not break the backward compatibility. ABI major changes done in v4.0: - L1 ABI, where MAC and PHY API configuration are split. - ACL has been split to low-level TCAM and Counters ABI to provide more HW ACL capabilities for future driver versions. To support backward support, the addition compatibility layer is required in the driver which will have two different codebase under "if FW-VER elif FW-VER else" conditions that will be removed in the future anyway, So, the idea was to break backward support and focus on more stable FW instead of supporting old version with very minimal and limited set of features/capabilities. Improve FW msg validation: * Use __le64, __le32, __le16 types in msg to/from FW to catch endian mismatch by sparse. * Use BUILD_BUG_ON for structures sent/recv to/from FW. Co-developed-by: Vadym Kochan <vkochan@marvell.com> Signed-off-by: Vadym Kochan <vkochan@marvell.com> Signed-off-by: Yevhen Orlov <yevhen.orlov@plvision.eu> Signed-off-by: Taras Chornyi <tchornyi@marvell.com> Signed-off-by: Volodymyr Mytnyk <vmytnyk@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-29 13:38:07 +08:00
struct prestera_msg_event_port_param {
union {
struct {
__le32 mode;
__le32 speed;
u8 oper;
net: marvell: prestera: add firmware v4.0 support Add firmware (FW) version 4.0 support for Marvell Prestera driver. Major changes have been made to new v4.0 FW ABI to add support of new features, introduce the stability of the FW ABI and ensure better forward compatibility for the future driver vesrions. Current v4.0 FW feature set support does not expect any changes to ABI, as it was defined and tested through long period of time. The ABI may be extended in case of new features, but it will not break the backward compatibility. ABI major changes done in v4.0: - L1 ABI, where MAC and PHY API configuration are split. - ACL has been split to low-level TCAM and Counters ABI to provide more HW ACL capabilities for future driver versions. To support backward support, the addition compatibility layer is required in the driver which will have two different codebase under "if FW-VER elif FW-VER else" conditions that will be removed in the future anyway, So, the idea was to break backward support and focus on more stable FW instead of supporting old version with very minimal and limited set of features/capabilities. Improve FW msg validation: * Use __le64, __le32, __le16 types in msg to/from FW to catch endian mismatch by sparse. * Use BUILD_BUG_ON for structures sent/recv to/from FW. Co-developed-by: Vadym Kochan <vkochan@marvell.com> Signed-off-by: Vadym Kochan <vkochan@marvell.com> Signed-off-by: Yevhen Orlov <yevhen.orlov@plvision.eu> Signed-off-by: Taras Chornyi <tchornyi@marvell.com> Signed-off-by: Volodymyr Mytnyk <vmytnyk@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-29 13:38:07 +08:00
u8 duplex;
u8 fc;
u8 fec;
} mac;
net: marvell: prestera: add firmware v4.0 support Add firmware (FW) version 4.0 support for Marvell Prestera driver. Major changes have been made to new v4.0 FW ABI to add support of new features, introduce the stability of the FW ABI and ensure better forward compatibility for the future driver vesrions. Current v4.0 FW feature set support does not expect any changes to ABI, as it was defined and tested through long period of time. The ABI may be extended in case of new features, but it will not break the backward compatibility. ABI major changes done in v4.0: - L1 ABI, where MAC and PHY API configuration are split. - ACL has been split to low-level TCAM and Counters ABI to provide more HW ACL capabilities for future driver versions. To support backward support, the addition compatibility layer is required in the driver which will have two different codebase under "if FW-VER elif FW-VER else" conditions that will be removed in the future anyway, So, the idea was to break backward support and focus on more stable FW instead of supporting old version with very minimal and limited set of features/capabilities. Improve FW msg validation: * Use __le64, __le32, __le16 types in msg to/from FW to catch endian mismatch by sparse. * Use BUILD_BUG_ON for structures sent/recv to/from FW. Co-developed-by: Vadym Kochan <vkochan@marvell.com> Signed-off-by: Vadym Kochan <vkochan@marvell.com> Signed-off-by: Yevhen Orlov <yevhen.orlov@plvision.eu> Signed-off-by: Taras Chornyi <tchornyi@marvell.com> Signed-off-by: Volodymyr Mytnyk <vmytnyk@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-29 13:38:07 +08:00
struct {
__le64 lmode_bmap;
u8 mdix;
net: marvell: prestera: add firmware v4.0 support Add firmware (FW) version 4.0 support for Marvell Prestera driver. Major changes have been made to new v4.0 FW ABI to add support of new features, introduce the stability of the FW ABI and ensure better forward compatibility for the future driver vesrions. Current v4.0 FW feature set support does not expect any changes to ABI, as it was defined and tested through long period of time. The ABI may be extended in case of new features, but it will not break the backward compatibility. ABI major changes done in v4.0: - L1 ABI, where MAC and PHY API configuration are split. - ACL has been split to low-level TCAM and Counters ABI to provide more HW ACL capabilities for future driver versions. To support backward support, the addition compatibility layer is required in the driver which will have two different codebase under "if FW-VER elif FW-VER else" conditions that will be removed in the future anyway, So, the idea was to break backward support and focus on more stable FW instead of supporting old version with very minimal and limited set of features/capabilities. Improve FW msg validation: * Use __le64, __le32, __le16 types in msg to/from FW to catch endian mismatch by sparse. * Use BUILD_BUG_ON for structures sent/recv to/from FW. Co-developed-by: Vadym Kochan <vkochan@marvell.com> Signed-off-by: Vadym Kochan <vkochan@marvell.com> Signed-off-by: Yevhen Orlov <yevhen.orlov@plvision.eu> Signed-off-by: Taras Chornyi <tchornyi@marvell.com> Signed-off-by: Volodymyr Mytnyk <vmytnyk@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-29 13:38:07 +08:00
u8 fc;
u8 __pad[2];
} __packed phy; /* make sure always 12 bytes size */
};
};
net: marvell: prestera: Add driver for Prestera family ASIC devices Marvell Prestera 98DX326x integrates up to 24 ports of 1GbE with 8 ports of 10GbE uplinks or 2 ports of 40Gbps stacking for a largely wireless SMB deployment. The current implementation supports only boards designed for the Marvell Switchdev solution and requires special firmware. The core Prestera switching logic is implemented in prestera_main.c, there is an intermediate hw layer between core logic and firmware. It is implemented in prestera_hw.c, the purpose of it is to encapsulate hw related logic, in future there is a plan to support more devices with different HW related configurations. This patch contains only basic switch initialization and RX/TX support over SDMA mechanism. Currently supported devices have DMA access range <= 32bit and require ZONE_DMA to be enabled, for such cases SDMA driver checks if the skb allocated in proper range supported by the Prestera device. Also meanwhile there is no TX interrupt support in current firmware version so recycling work is scheduled on each xmit. Port's mac address is generated from the switch base mac which may be provided via device-tree (static one or as nvme cell), or randomly generated. This is required by the firmware. Co-developed-by: Andrii Savka <andrii.savka@plvision.eu> Signed-off-by: Andrii Savka <andrii.savka@plvision.eu> Co-developed-by: Oleksandr Mazur <oleksandr.mazur@plvision.eu> Signed-off-by: Oleksandr Mazur <oleksandr.mazur@plvision.eu> Co-developed-by: Serhiy Boiko <serhiy.boiko@plvision.eu> Signed-off-by: Serhiy Boiko <serhiy.boiko@plvision.eu> Co-developed-by: Serhiy Pshyk <serhiy.pshyk@plvision.eu> Signed-off-by: Serhiy Pshyk <serhiy.pshyk@plvision.eu> Co-developed-by: Taras Chornyi <taras.chornyi@plvision.eu> Signed-off-by: Taras Chornyi <taras.chornyi@plvision.eu> Co-developed-by: Volodymyr Mytnyk <volodymyr.mytnyk@plvision.eu> Signed-off-by: Volodymyr Mytnyk <volodymyr.mytnyk@plvision.eu> Signed-off-by: Vadym Kochan <vadym.kochan@plvision.eu> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-17 00:30:57 +08:00
struct prestera_msg_port_cap_param {
net: marvell: prestera: add firmware v4.0 support Add firmware (FW) version 4.0 support for Marvell Prestera driver. Major changes have been made to new v4.0 FW ABI to add support of new features, introduce the stability of the FW ABI and ensure better forward compatibility for the future driver vesrions. Current v4.0 FW feature set support does not expect any changes to ABI, as it was defined and tested through long period of time. The ABI may be extended in case of new features, but it will not break the backward compatibility. ABI major changes done in v4.0: - L1 ABI, where MAC and PHY API configuration are split. - ACL has been split to low-level TCAM and Counters ABI to provide more HW ACL capabilities for future driver versions. To support backward support, the addition compatibility layer is required in the driver which will have two different codebase under "if FW-VER elif FW-VER else" conditions that will be removed in the future anyway, So, the idea was to break backward support and focus on more stable FW instead of supporting old version with very minimal and limited set of features/capabilities. Improve FW msg validation: * Use __le64, __le32, __le16 types in msg to/from FW to catch endian mismatch by sparse. * Use BUILD_BUG_ON for structures sent/recv to/from FW. Co-developed-by: Vadym Kochan <vkochan@marvell.com> Signed-off-by: Vadym Kochan <vkochan@marvell.com> Signed-off-by: Yevhen Orlov <yevhen.orlov@plvision.eu> Signed-off-by: Taras Chornyi <tchornyi@marvell.com> Signed-off-by: Volodymyr Mytnyk <vmytnyk@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-29 13:38:07 +08:00
__le64 link_mode;
u8 type;
u8 fec;
u8 fc;
u8 transceiver;
net: marvell: prestera: Add driver for Prestera family ASIC devices Marvell Prestera 98DX326x integrates up to 24 ports of 1GbE with 8 ports of 10GbE uplinks or 2 ports of 40Gbps stacking for a largely wireless SMB deployment. The current implementation supports only boards designed for the Marvell Switchdev solution and requires special firmware. The core Prestera switching logic is implemented in prestera_main.c, there is an intermediate hw layer between core logic and firmware. It is implemented in prestera_hw.c, the purpose of it is to encapsulate hw related logic, in future there is a plan to support more devices with different HW related configurations. This patch contains only basic switch initialization and RX/TX support over SDMA mechanism. Currently supported devices have DMA access range <= 32bit and require ZONE_DMA to be enabled, for such cases SDMA driver checks if the skb allocated in proper range supported by the Prestera device. Also meanwhile there is no TX interrupt support in current firmware version so recycling work is scheduled on each xmit. Port's mac address is generated from the switch base mac which may be provided via device-tree (static one or as nvme cell), or randomly generated. This is required by the firmware. Co-developed-by: Andrii Savka <andrii.savka@plvision.eu> Signed-off-by: Andrii Savka <andrii.savka@plvision.eu> Co-developed-by: Oleksandr Mazur <oleksandr.mazur@plvision.eu> Signed-off-by: Oleksandr Mazur <oleksandr.mazur@plvision.eu> Co-developed-by: Serhiy Boiko <serhiy.boiko@plvision.eu> Signed-off-by: Serhiy Boiko <serhiy.boiko@plvision.eu> Co-developed-by: Serhiy Pshyk <serhiy.pshyk@plvision.eu> Signed-off-by: Serhiy Pshyk <serhiy.pshyk@plvision.eu> Co-developed-by: Taras Chornyi <taras.chornyi@plvision.eu> Signed-off-by: Taras Chornyi <taras.chornyi@plvision.eu> Co-developed-by: Volodymyr Mytnyk <volodymyr.mytnyk@plvision.eu> Signed-off-by: Volodymyr Mytnyk <volodymyr.mytnyk@plvision.eu> Signed-off-by: Vadym Kochan <vadym.kochan@plvision.eu> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-17 00:30:57 +08:00
};
struct prestera_msg_port_flood_param {
u8 type;
u8 enable;
u8 __pad[2];
};
net: marvell: prestera: Add driver for Prestera family ASIC devices Marvell Prestera 98DX326x integrates up to 24 ports of 1GbE with 8 ports of 10GbE uplinks or 2 ports of 40Gbps stacking for a largely wireless SMB deployment. The current implementation supports only boards designed for the Marvell Switchdev solution and requires special firmware. The core Prestera switching logic is implemented in prestera_main.c, there is an intermediate hw layer between core logic and firmware. It is implemented in prestera_hw.c, the purpose of it is to encapsulate hw related logic, in future there is a plan to support more devices with different HW related configurations. This patch contains only basic switch initialization and RX/TX support over SDMA mechanism. Currently supported devices have DMA access range <= 32bit and require ZONE_DMA to be enabled, for such cases SDMA driver checks if the skb allocated in proper range supported by the Prestera device. Also meanwhile there is no TX interrupt support in current firmware version so recycling work is scheduled on each xmit. Port's mac address is generated from the switch base mac which may be provided via device-tree (static one or as nvme cell), or randomly generated. This is required by the firmware. Co-developed-by: Andrii Savka <andrii.savka@plvision.eu> Signed-off-by: Andrii Savka <andrii.savka@plvision.eu> Co-developed-by: Oleksandr Mazur <oleksandr.mazur@plvision.eu> Signed-off-by: Oleksandr Mazur <oleksandr.mazur@plvision.eu> Co-developed-by: Serhiy Boiko <serhiy.boiko@plvision.eu> Signed-off-by: Serhiy Boiko <serhiy.boiko@plvision.eu> Co-developed-by: Serhiy Pshyk <serhiy.pshyk@plvision.eu> Signed-off-by: Serhiy Pshyk <serhiy.pshyk@plvision.eu> Co-developed-by: Taras Chornyi <taras.chornyi@plvision.eu> Signed-off-by: Taras Chornyi <taras.chornyi@plvision.eu> Co-developed-by: Volodymyr Mytnyk <volodymyr.mytnyk@plvision.eu> Signed-off-by: Volodymyr Mytnyk <volodymyr.mytnyk@plvision.eu> Signed-off-by: Vadym Kochan <vadym.kochan@plvision.eu> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-17 00:30:57 +08:00
union prestera_msg_port_param {
__le32 mtu;
__le32 speed;
__le32 link_mode;
net: marvell: prestera: add firmware v4.0 support Add firmware (FW) version 4.0 support for Marvell Prestera driver. Major changes have been made to new v4.0 FW ABI to add support of new features, introduce the stability of the FW ABI and ensure better forward compatibility for the future driver vesrions. Current v4.0 FW feature set support does not expect any changes to ABI, as it was defined and tested through long period of time. The ABI may be extended in case of new features, but it will not break the backward compatibility. ABI major changes done in v4.0: - L1 ABI, where MAC and PHY API configuration are split. - ACL has been split to low-level TCAM and Counters ABI to provide more HW ACL capabilities for future driver versions. To support backward support, the addition compatibility layer is required in the driver which will have two different codebase under "if FW-VER elif FW-VER else" conditions that will be removed in the future anyway, So, the idea was to break backward support and focus on more stable FW instead of supporting old version with very minimal and limited set of features/capabilities. Improve FW msg validation: * Use __le64, __le32, __le16 types in msg to/from FW to catch endian mismatch by sparse. * Use BUILD_BUG_ON for structures sent/recv to/from FW. Co-developed-by: Vadym Kochan <vkochan@marvell.com> Signed-off-by: Vadym Kochan <vkochan@marvell.com> Signed-off-by: Yevhen Orlov <yevhen.orlov@plvision.eu> Signed-off-by: Taras Chornyi <tchornyi@marvell.com> Signed-off-by: Volodymyr Mytnyk <vmytnyk@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-29 13:38:07 +08:00
u8 admin_state;
u8 oper_state;
u8 mac[ETH_ALEN];
u8 accept_frm_type;
u8 learning;
u8 flood;
net: marvell: prestera: add firmware v4.0 support Add firmware (FW) version 4.0 support for Marvell Prestera driver. Major changes have been made to new v4.0 FW ABI to add support of new features, introduce the stability of the FW ABI and ensure better forward compatibility for the future driver vesrions. Current v4.0 FW feature set support does not expect any changes to ABI, as it was defined and tested through long period of time. The ABI may be extended in case of new features, but it will not break the backward compatibility. ABI major changes done in v4.0: - L1 ABI, where MAC and PHY API configuration are split. - ACL has been split to low-level TCAM and Counters ABI to provide more HW ACL capabilities for future driver versions. To support backward support, the addition compatibility layer is required in the driver which will have two different codebase under "if FW-VER elif FW-VER else" conditions that will be removed in the future anyway, So, the idea was to break backward support and focus on more stable FW instead of supporting old version with very minimal and limited set of features/capabilities. Improve FW msg validation: * Use __le64, __le32, __le16 types in msg to/from FW to catch endian mismatch by sparse. * Use BUILD_BUG_ON for structures sent/recv to/from FW. Co-developed-by: Vadym Kochan <vkochan@marvell.com> Signed-off-by: Vadym Kochan <vkochan@marvell.com> Signed-off-by: Yevhen Orlov <yevhen.orlov@plvision.eu> Signed-off-by: Taras Chornyi <tchornyi@marvell.com> Signed-off-by: Volodymyr Mytnyk <vmytnyk@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-29 13:38:07 +08:00
u8 type;
u8 duplex;
u8 fec;
u8 fc;
union {
struct {
u8 admin;
net: marvell: prestera: add firmware v4.0 support Add firmware (FW) version 4.0 support for Marvell Prestera driver. Major changes have been made to new v4.0 FW ABI to add support of new features, introduce the stability of the FW ABI and ensure better forward compatibility for the future driver vesrions. Current v4.0 FW feature set support does not expect any changes to ABI, as it was defined and tested through long period of time. The ABI may be extended in case of new features, but it will not break the backward compatibility. ABI major changes done in v4.0: - L1 ABI, where MAC and PHY API configuration are split. - ACL has been split to low-level TCAM and Counters ABI to provide more HW ACL capabilities for future driver versions. To support backward support, the addition compatibility layer is required in the driver which will have two different codebase under "if FW-VER elif FW-VER else" conditions that will be removed in the future anyway, So, the idea was to break backward support and focus on more stable FW instead of supporting old version with very minimal and limited set of features/capabilities. Improve FW msg validation: * Use __le64, __le32, __le16 types in msg to/from FW to catch endian mismatch by sparse. * Use BUILD_BUG_ON for structures sent/recv to/from FW. Co-developed-by: Vadym Kochan <vkochan@marvell.com> Signed-off-by: Vadym Kochan <vkochan@marvell.com> Signed-off-by: Yevhen Orlov <yevhen.orlov@plvision.eu> Signed-off-by: Taras Chornyi <tchornyi@marvell.com> Signed-off-by: Volodymyr Mytnyk <vmytnyk@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-29 13:38:07 +08:00
u8 fc;
u8 ap_enable;
u8 __reserved[5];
net: marvell: prestera: add firmware v4.0 support Add firmware (FW) version 4.0 support for Marvell Prestera driver. Major changes have been made to new v4.0 FW ABI to add support of new features, introduce the stability of the FW ABI and ensure better forward compatibility for the future driver vesrions. Current v4.0 FW feature set support does not expect any changes to ABI, as it was defined and tested through long period of time. The ABI may be extended in case of new features, but it will not break the backward compatibility. ABI major changes done in v4.0: - L1 ABI, where MAC and PHY API configuration are split. - ACL has been split to low-level TCAM and Counters ABI to provide more HW ACL capabilities for future driver versions. To support backward support, the addition compatibility layer is required in the driver which will have two different codebase under "if FW-VER elif FW-VER else" conditions that will be removed in the future anyway, So, the idea was to break backward support and focus on more stable FW instead of supporting old version with very minimal and limited set of features/capabilities. Improve FW msg validation: * Use __le64, __le32, __le16 types in msg to/from FW to catch endian mismatch by sparse. * Use BUILD_BUG_ON for structures sent/recv to/from FW. Co-developed-by: Vadym Kochan <vkochan@marvell.com> Signed-off-by: Vadym Kochan <vkochan@marvell.com> Signed-off-by: Yevhen Orlov <yevhen.orlov@plvision.eu> Signed-off-by: Taras Chornyi <tchornyi@marvell.com> Signed-off-by: Volodymyr Mytnyk <vmytnyk@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-29 13:38:07 +08:00
union {
struct {
__le32 mode;
__le32 speed;
u8 inband;
u8 duplex;
u8 fec;
u8 fec_supp;
} reg_mode;
net: marvell: prestera: add firmware v4.0 support Add firmware (FW) version 4.0 support for Marvell Prestera driver. Major changes have been made to new v4.0 FW ABI to add support of new features, introduce the stability of the FW ABI and ensure better forward compatibility for the future driver vesrions. Current v4.0 FW feature set support does not expect any changes to ABI, as it was defined and tested through long period of time. The ABI may be extended in case of new features, but it will not break the backward compatibility. ABI major changes done in v4.0: - L1 ABI, where MAC and PHY API configuration are split. - ACL has been split to low-level TCAM and Counters ABI to provide more HW ACL capabilities for future driver versions. To support backward support, the addition compatibility layer is required in the driver which will have two different codebase under "if FW-VER elif FW-VER else" conditions that will be removed in the future anyway, So, the idea was to break backward support and focus on more stable FW instead of supporting old version with very minimal and limited set of features/capabilities. Improve FW msg validation: * Use __le64, __le32, __le16 types in msg to/from FW to catch endian mismatch by sparse. * Use BUILD_BUG_ON for structures sent/recv to/from FW. Co-developed-by: Vadym Kochan <vkochan@marvell.com> Signed-off-by: Vadym Kochan <vkochan@marvell.com> Signed-off-by: Yevhen Orlov <yevhen.orlov@plvision.eu> Signed-off-by: Taras Chornyi <tchornyi@marvell.com> Signed-off-by: Volodymyr Mytnyk <vmytnyk@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-29 13:38:07 +08:00
struct {
__le32 mode;
__le32 speed;
u8 fec;
u8 fec_supp;
u8 __pad[2];
} ap_modes[PRESTERA_AP_PORT_MAX];
};
} mac;
net: marvell: prestera: add firmware v4.0 support Add firmware (FW) version 4.0 support for Marvell Prestera driver. Major changes have been made to new v4.0 FW ABI to add support of new features, introduce the stability of the FW ABI and ensure better forward compatibility for the future driver vesrions. Current v4.0 FW feature set support does not expect any changes to ABI, as it was defined and tested through long period of time. The ABI may be extended in case of new features, but it will not break the backward compatibility. ABI major changes done in v4.0: - L1 ABI, where MAC and PHY API configuration are split. - ACL has been split to low-level TCAM and Counters ABI to provide more HW ACL capabilities for future driver versions. To support backward support, the addition compatibility layer is required in the driver which will have two different codebase under "if FW-VER elif FW-VER else" conditions that will be removed in the future anyway, So, the idea was to break backward support and focus on more stable FW instead of supporting old version with very minimal and limited set of features/capabilities. Improve FW msg validation: * Use __le64, __le32, __le16 types in msg to/from FW to catch endian mismatch by sparse. * Use BUILD_BUG_ON for structures sent/recv to/from FW. Co-developed-by: Vadym Kochan <vkochan@marvell.com> Signed-off-by: Vadym Kochan <vkochan@marvell.com> Signed-off-by: Yevhen Orlov <yevhen.orlov@plvision.eu> Signed-off-by: Taras Chornyi <tchornyi@marvell.com> Signed-off-by: Volodymyr Mytnyk <vmytnyk@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-29 13:38:07 +08:00
struct {
__le64 modes;
__le32 mode;
u8 admin;
u8 adv_enable;
net: marvell: prestera: add firmware v4.0 support Add firmware (FW) version 4.0 support for Marvell Prestera driver. Major changes have been made to new v4.0 FW ABI to add support of new features, introduce the stability of the FW ABI and ensure better forward compatibility for the future driver vesrions. Current v4.0 FW feature set support does not expect any changes to ABI, as it was defined and tested through long period of time. The ABI may be extended in case of new features, but it will not break the backward compatibility. ABI major changes done in v4.0: - L1 ABI, where MAC and PHY API configuration are split. - ACL has been split to low-level TCAM and Counters ABI to provide more HW ACL capabilities for future driver versions. To support backward support, the addition compatibility layer is required in the driver which will have two different codebase under "if FW-VER elif FW-VER else" conditions that will be removed in the future anyway, So, the idea was to break backward support and focus on more stable FW instead of supporting old version with very minimal and limited set of features/capabilities. Improve FW msg validation: * Use __le64, __le32, __le16 types in msg to/from FW to catch endian mismatch by sparse. * Use BUILD_BUG_ON for structures sent/recv to/from FW. Co-developed-by: Vadym Kochan <vkochan@marvell.com> Signed-off-by: Vadym Kochan <vkochan@marvell.com> Signed-off-by: Yevhen Orlov <yevhen.orlov@plvision.eu> Signed-off-by: Taras Chornyi <tchornyi@marvell.com> Signed-off-by: Volodymyr Mytnyk <vmytnyk@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-29 13:38:07 +08:00
u8 mdix;
u8 __pad;
} phy;
} link;
net: marvell: prestera: add firmware v4.0 support Add firmware (FW) version 4.0 support for Marvell Prestera driver. Major changes have been made to new v4.0 FW ABI to add support of new features, introduce the stability of the FW ABI and ensure better forward compatibility for the future driver vesrions. Current v4.0 FW feature set support does not expect any changes to ABI, as it was defined and tested through long period of time. The ABI may be extended in case of new features, but it will not break the backward compatibility. ABI major changes done in v4.0: - L1 ABI, where MAC and PHY API configuration are split. - ACL has been split to low-level TCAM and Counters ABI to provide more HW ACL capabilities for future driver versions. To support backward support, the addition compatibility layer is required in the driver which will have two different codebase under "if FW-VER elif FW-VER else" conditions that will be removed in the future anyway, So, the idea was to break backward support and focus on more stable FW instead of supporting old version with very minimal and limited set of features/capabilities. Improve FW msg validation: * Use __le64, __le32, __le16 types in msg to/from FW to catch endian mismatch by sparse. * Use BUILD_BUG_ON for structures sent/recv to/from FW. Co-developed-by: Vadym Kochan <vkochan@marvell.com> Signed-off-by: Vadym Kochan <vkochan@marvell.com> Signed-off-by: Yevhen Orlov <yevhen.orlov@plvision.eu> Signed-off-by: Taras Chornyi <tchornyi@marvell.com> Signed-off-by: Volodymyr Mytnyk <vmytnyk@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-29 13:38:07 +08:00
net: marvell: prestera: Add driver for Prestera family ASIC devices Marvell Prestera 98DX326x integrates up to 24 ports of 1GbE with 8 ports of 10GbE uplinks or 2 ports of 40Gbps stacking for a largely wireless SMB deployment. The current implementation supports only boards designed for the Marvell Switchdev solution and requires special firmware. The core Prestera switching logic is implemented in prestera_main.c, there is an intermediate hw layer between core logic and firmware. It is implemented in prestera_hw.c, the purpose of it is to encapsulate hw related logic, in future there is a plan to support more devices with different HW related configurations. This patch contains only basic switch initialization and RX/TX support over SDMA mechanism. Currently supported devices have DMA access range <= 32bit and require ZONE_DMA to be enabled, for such cases SDMA driver checks if the skb allocated in proper range supported by the Prestera device. Also meanwhile there is no TX interrupt support in current firmware version so recycling work is scheduled on each xmit. Port's mac address is generated from the switch base mac which may be provided via device-tree (static one or as nvme cell), or randomly generated. This is required by the firmware. Co-developed-by: Andrii Savka <andrii.savka@plvision.eu> Signed-off-by: Andrii Savka <andrii.savka@plvision.eu> Co-developed-by: Oleksandr Mazur <oleksandr.mazur@plvision.eu> Signed-off-by: Oleksandr Mazur <oleksandr.mazur@plvision.eu> Co-developed-by: Serhiy Boiko <serhiy.boiko@plvision.eu> Signed-off-by: Serhiy Boiko <serhiy.boiko@plvision.eu> Co-developed-by: Serhiy Pshyk <serhiy.pshyk@plvision.eu> Signed-off-by: Serhiy Pshyk <serhiy.pshyk@plvision.eu> Co-developed-by: Taras Chornyi <taras.chornyi@plvision.eu> Signed-off-by: Taras Chornyi <taras.chornyi@plvision.eu> Co-developed-by: Volodymyr Mytnyk <volodymyr.mytnyk@plvision.eu> Signed-off-by: Volodymyr Mytnyk <volodymyr.mytnyk@plvision.eu> Signed-off-by: Vadym Kochan <vadym.kochan@plvision.eu> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-17 00:30:57 +08:00
struct prestera_msg_port_cap_param cap;
struct prestera_msg_port_flood_param flood_ext;
net: marvell: prestera: add firmware v4.0 support Add firmware (FW) version 4.0 support for Marvell Prestera driver. Major changes have been made to new v4.0 FW ABI to add support of new features, introduce the stability of the FW ABI and ensure better forward compatibility for the future driver vesrions. Current v4.0 FW feature set support does not expect any changes to ABI, as it was defined and tested through long period of time. The ABI may be extended in case of new features, but it will not break the backward compatibility. ABI major changes done in v4.0: - L1 ABI, where MAC and PHY API configuration are split. - ACL has been split to low-level TCAM and Counters ABI to provide more HW ACL capabilities for future driver versions. To support backward support, the addition compatibility layer is required in the driver which will have two different codebase under "if FW-VER elif FW-VER else" conditions that will be removed in the future anyway, So, the idea was to break backward support and focus on more stable FW instead of supporting old version with very minimal and limited set of features/capabilities. Improve FW msg validation: * Use __le64, __le32, __le16 types in msg to/from FW to catch endian mismatch by sparse. * Use BUILD_BUG_ON for structures sent/recv to/from FW. Co-developed-by: Vadym Kochan <vkochan@marvell.com> Signed-off-by: Vadym Kochan <vkochan@marvell.com> Signed-off-by: Yevhen Orlov <yevhen.orlov@plvision.eu> Signed-off-by: Taras Chornyi <tchornyi@marvell.com> Signed-off-by: Volodymyr Mytnyk <vmytnyk@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-29 13:38:07 +08:00
struct prestera_msg_event_port_param link_evt;
};
net: marvell: prestera: Add driver for Prestera family ASIC devices Marvell Prestera 98DX326x integrates up to 24 ports of 1GbE with 8 ports of 10GbE uplinks or 2 ports of 40Gbps stacking for a largely wireless SMB deployment. The current implementation supports only boards designed for the Marvell Switchdev solution and requires special firmware. The core Prestera switching logic is implemented in prestera_main.c, there is an intermediate hw layer between core logic and firmware. It is implemented in prestera_hw.c, the purpose of it is to encapsulate hw related logic, in future there is a plan to support more devices with different HW related configurations. This patch contains only basic switch initialization and RX/TX support over SDMA mechanism. Currently supported devices have DMA access range <= 32bit and require ZONE_DMA to be enabled, for such cases SDMA driver checks if the skb allocated in proper range supported by the Prestera device. Also meanwhile there is no TX interrupt support in current firmware version so recycling work is scheduled on each xmit. Port's mac address is generated from the switch base mac which may be provided via device-tree (static one or as nvme cell), or randomly generated. This is required by the firmware. Co-developed-by: Andrii Savka <andrii.savka@plvision.eu> Signed-off-by: Andrii Savka <andrii.savka@plvision.eu> Co-developed-by: Oleksandr Mazur <oleksandr.mazur@plvision.eu> Signed-off-by: Oleksandr Mazur <oleksandr.mazur@plvision.eu> Co-developed-by: Serhiy Boiko <serhiy.boiko@plvision.eu> Signed-off-by: Serhiy Boiko <serhiy.boiko@plvision.eu> Co-developed-by: Serhiy Pshyk <serhiy.pshyk@plvision.eu> Signed-off-by: Serhiy Pshyk <serhiy.pshyk@plvision.eu> Co-developed-by: Taras Chornyi <taras.chornyi@plvision.eu> Signed-off-by: Taras Chornyi <taras.chornyi@plvision.eu> Co-developed-by: Volodymyr Mytnyk <volodymyr.mytnyk@plvision.eu> Signed-off-by: Volodymyr Mytnyk <volodymyr.mytnyk@plvision.eu> Signed-off-by: Vadym Kochan <vadym.kochan@plvision.eu> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-17 00:30:57 +08:00
struct prestera_msg_port_attr_req {
struct prestera_msg_cmd cmd;
net: marvell: prestera: add firmware v4.0 support Add firmware (FW) version 4.0 support for Marvell Prestera driver. Major changes have been made to new v4.0 FW ABI to add support of new features, introduce the stability of the FW ABI and ensure better forward compatibility for the future driver vesrions. Current v4.0 FW feature set support does not expect any changes to ABI, as it was defined and tested through long period of time. The ABI may be extended in case of new features, but it will not break the backward compatibility. ABI major changes done in v4.0: - L1 ABI, where MAC and PHY API configuration are split. - ACL has been split to low-level TCAM and Counters ABI to provide more HW ACL capabilities for future driver versions. To support backward support, the addition compatibility layer is required in the driver which will have two different codebase under "if FW-VER elif FW-VER else" conditions that will be removed in the future anyway, So, the idea was to break backward support and focus on more stable FW instead of supporting old version with very minimal and limited set of features/capabilities. Improve FW msg validation: * Use __le64, __le32, __le16 types in msg to/from FW to catch endian mismatch by sparse. * Use BUILD_BUG_ON for structures sent/recv to/from FW. Co-developed-by: Vadym Kochan <vkochan@marvell.com> Signed-off-by: Vadym Kochan <vkochan@marvell.com> Signed-off-by: Yevhen Orlov <yevhen.orlov@plvision.eu> Signed-off-by: Taras Chornyi <tchornyi@marvell.com> Signed-off-by: Volodymyr Mytnyk <vmytnyk@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-29 13:38:07 +08:00
__le32 attr;
__le32 port;
__le32 dev;
net: marvell: prestera: Add driver for Prestera family ASIC devices Marvell Prestera 98DX326x integrates up to 24 ports of 1GbE with 8 ports of 10GbE uplinks or 2 ports of 40Gbps stacking for a largely wireless SMB deployment. The current implementation supports only boards designed for the Marvell Switchdev solution and requires special firmware. The core Prestera switching logic is implemented in prestera_main.c, there is an intermediate hw layer between core logic and firmware. It is implemented in prestera_hw.c, the purpose of it is to encapsulate hw related logic, in future there is a plan to support more devices with different HW related configurations. This patch contains only basic switch initialization and RX/TX support over SDMA mechanism. Currently supported devices have DMA access range <= 32bit and require ZONE_DMA to be enabled, for such cases SDMA driver checks if the skb allocated in proper range supported by the Prestera device. Also meanwhile there is no TX interrupt support in current firmware version so recycling work is scheduled on each xmit. Port's mac address is generated from the switch base mac which may be provided via device-tree (static one or as nvme cell), or randomly generated. This is required by the firmware. Co-developed-by: Andrii Savka <andrii.savka@plvision.eu> Signed-off-by: Andrii Savka <andrii.savka@plvision.eu> Co-developed-by: Oleksandr Mazur <oleksandr.mazur@plvision.eu> Signed-off-by: Oleksandr Mazur <oleksandr.mazur@plvision.eu> Co-developed-by: Serhiy Boiko <serhiy.boiko@plvision.eu> Signed-off-by: Serhiy Boiko <serhiy.boiko@plvision.eu> Co-developed-by: Serhiy Pshyk <serhiy.pshyk@plvision.eu> Signed-off-by: Serhiy Pshyk <serhiy.pshyk@plvision.eu> Co-developed-by: Taras Chornyi <taras.chornyi@plvision.eu> Signed-off-by: Taras Chornyi <taras.chornyi@plvision.eu> Co-developed-by: Volodymyr Mytnyk <volodymyr.mytnyk@plvision.eu> Signed-off-by: Volodymyr Mytnyk <volodymyr.mytnyk@plvision.eu> Signed-off-by: Vadym Kochan <vadym.kochan@plvision.eu> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-17 00:30:57 +08:00
union prestera_msg_port_param param;
};
net: marvell: prestera: Add driver for Prestera family ASIC devices Marvell Prestera 98DX326x integrates up to 24 ports of 1GbE with 8 ports of 10GbE uplinks or 2 ports of 40Gbps stacking for a largely wireless SMB deployment. The current implementation supports only boards designed for the Marvell Switchdev solution and requires special firmware. The core Prestera switching logic is implemented in prestera_main.c, there is an intermediate hw layer between core logic and firmware. It is implemented in prestera_hw.c, the purpose of it is to encapsulate hw related logic, in future there is a plan to support more devices with different HW related configurations. This patch contains only basic switch initialization and RX/TX support over SDMA mechanism. Currently supported devices have DMA access range <= 32bit and require ZONE_DMA to be enabled, for such cases SDMA driver checks if the skb allocated in proper range supported by the Prestera device. Also meanwhile there is no TX interrupt support in current firmware version so recycling work is scheduled on each xmit. Port's mac address is generated from the switch base mac which may be provided via device-tree (static one or as nvme cell), or randomly generated. This is required by the firmware. Co-developed-by: Andrii Savka <andrii.savka@plvision.eu> Signed-off-by: Andrii Savka <andrii.savka@plvision.eu> Co-developed-by: Oleksandr Mazur <oleksandr.mazur@plvision.eu> Signed-off-by: Oleksandr Mazur <oleksandr.mazur@plvision.eu> Co-developed-by: Serhiy Boiko <serhiy.boiko@plvision.eu> Signed-off-by: Serhiy Boiko <serhiy.boiko@plvision.eu> Co-developed-by: Serhiy Pshyk <serhiy.pshyk@plvision.eu> Signed-off-by: Serhiy Pshyk <serhiy.pshyk@plvision.eu> Co-developed-by: Taras Chornyi <taras.chornyi@plvision.eu> Signed-off-by: Taras Chornyi <taras.chornyi@plvision.eu> Co-developed-by: Volodymyr Mytnyk <volodymyr.mytnyk@plvision.eu> Signed-off-by: Volodymyr Mytnyk <volodymyr.mytnyk@plvision.eu> Signed-off-by: Vadym Kochan <vadym.kochan@plvision.eu> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-17 00:30:57 +08:00
struct prestera_msg_port_attr_resp {
struct prestera_msg_ret ret;
union prestera_msg_port_param param;
};
net: marvell: prestera: Add driver for Prestera family ASIC devices Marvell Prestera 98DX326x integrates up to 24 ports of 1GbE with 8 ports of 10GbE uplinks or 2 ports of 40Gbps stacking for a largely wireless SMB deployment. The current implementation supports only boards designed for the Marvell Switchdev solution and requires special firmware. The core Prestera switching logic is implemented in prestera_main.c, there is an intermediate hw layer between core logic and firmware. It is implemented in prestera_hw.c, the purpose of it is to encapsulate hw related logic, in future there is a plan to support more devices with different HW related configurations. This patch contains only basic switch initialization and RX/TX support over SDMA mechanism. Currently supported devices have DMA access range <= 32bit and require ZONE_DMA to be enabled, for such cases SDMA driver checks if the skb allocated in proper range supported by the Prestera device. Also meanwhile there is no TX interrupt support in current firmware version so recycling work is scheduled on each xmit. Port's mac address is generated from the switch base mac which may be provided via device-tree (static one or as nvme cell), or randomly generated. This is required by the firmware. Co-developed-by: Andrii Savka <andrii.savka@plvision.eu> Signed-off-by: Andrii Savka <andrii.savka@plvision.eu> Co-developed-by: Oleksandr Mazur <oleksandr.mazur@plvision.eu> Signed-off-by: Oleksandr Mazur <oleksandr.mazur@plvision.eu> Co-developed-by: Serhiy Boiko <serhiy.boiko@plvision.eu> Signed-off-by: Serhiy Boiko <serhiy.boiko@plvision.eu> Co-developed-by: Serhiy Pshyk <serhiy.pshyk@plvision.eu> Signed-off-by: Serhiy Pshyk <serhiy.pshyk@plvision.eu> Co-developed-by: Taras Chornyi <taras.chornyi@plvision.eu> Signed-off-by: Taras Chornyi <taras.chornyi@plvision.eu> Co-developed-by: Volodymyr Mytnyk <volodymyr.mytnyk@plvision.eu> Signed-off-by: Volodymyr Mytnyk <volodymyr.mytnyk@plvision.eu> Signed-off-by: Vadym Kochan <vadym.kochan@plvision.eu> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-17 00:30:57 +08:00
struct prestera_msg_port_stats_resp {
struct prestera_msg_ret ret;
net: marvell: prestera: add firmware v4.0 support Add firmware (FW) version 4.0 support for Marvell Prestera driver. Major changes have been made to new v4.0 FW ABI to add support of new features, introduce the stability of the FW ABI and ensure better forward compatibility for the future driver vesrions. Current v4.0 FW feature set support does not expect any changes to ABI, as it was defined and tested through long period of time. The ABI may be extended in case of new features, but it will not break the backward compatibility. ABI major changes done in v4.0: - L1 ABI, where MAC and PHY API configuration are split. - ACL has been split to low-level TCAM and Counters ABI to provide more HW ACL capabilities for future driver versions. To support backward support, the addition compatibility layer is required in the driver which will have two different codebase under "if FW-VER elif FW-VER else" conditions that will be removed in the future anyway, So, the idea was to break backward support and focus on more stable FW instead of supporting old version with very minimal and limited set of features/capabilities. Improve FW msg validation: * Use __le64, __le32, __le16 types in msg to/from FW to catch endian mismatch by sparse. * Use BUILD_BUG_ON for structures sent/recv to/from FW. Co-developed-by: Vadym Kochan <vkochan@marvell.com> Signed-off-by: Vadym Kochan <vkochan@marvell.com> Signed-off-by: Yevhen Orlov <yevhen.orlov@plvision.eu> Signed-off-by: Taras Chornyi <tchornyi@marvell.com> Signed-off-by: Volodymyr Mytnyk <vmytnyk@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-29 13:38:07 +08:00
__le64 stats[PRESTERA_PORT_CNT_MAX];
net: marvell: prestera: Add driver for Prestera family ASIC devices Marvell Prestera 98DX326x integrates up to 24 ports of 1GbE with 8 ports of 10GbE uplinks or 2 ports of 40Gbps stacking for a largely wireless SMB deployment. The current implementation supports only boards designed for the Marvell Switchdev solution and requires special firmware. The core Prestera switching logic is implemented in prestera_main.c, there is an intermediate hw layer between core logic and firmware. It is implemented in prestera_hw.c, the purpose of it is to encapsulate hw related logic, in future there is a plan to support more devices with different HW related configurations. This patch contains only basic switch initialization and RX/TX support over SDMA mechanism. Currently supported devices have DMA access range <= 32bit and require ZONE_DMA to be enabled, for such cases SDMA driver checks if the skb allocated in proper range supported by the Prestera device. Also meanwhile there is no TX interrupt support in current firmware version so recycling work is scheduled on each xmit. Port's mac address is generated from the switch base mac which may be provided via device-tree (static one or as nvme cell), or randomly generated. This is required by the firmware. Co-developed-by: Andrii Savka <andrii.savka@plvision.eu> Signed-off-by: Andrii Savka <andrii.savka@plvision.eu> Co-developed-by: Oleksandr Mazur <oleksandr.mazur@plvision.eu> Signed-off-by: Oleksandr Mazur <oleksandr.mazur@plvision.eu> Co-developed-by: Serhiy Boiko <serhiy.boiko@plvision.eu> Signed-off-by: Serhiy Boiko <serhiy.boiko@plvision.eu> Co-developed-by: Serhiy Pshyk <serhiy.pshyk@plvision.eu> Signed-off-by: Serhiy Pshyk <serhiy.pshyk@plvision.eu> Co-developed-by: Taras Chornyi <taras.chornyi@plvision.eu> Signed-off-by: Taras Chornyi <taras.chornyi@plvision.eu> Co-developed-by: Volodymyr Mytnyk <volodymyr.mytnyk@plvision.eu> Signed-off-by: Volodymyr Mytnyk <volodymyr.mytnyk@plvision.eu> Signed-off-by: Vadym Kochan <vadym.kochan@plvision.eu> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-17 00:30:57 +08:00
};
struct prestera_msg_port_info_req {
struct prestera_msg_cmd cmd;
net: marvell: prestera: add firmware v4.0 support Add firmware (FW) version 4.0 support for Marvell Prestera driver. Major changes have been made to new v4.0 FW ABI to add support of new features, introduce the stability of the FW ABI and ensure better forward compatibility for the future driver vesrions. Current v4.0 FW feature set support does not expect any changes to ABI, as it was defined and tested through long period of time. The ABI may be extended in case of new features, but it will not break the backward compatibility. ABI major changes done in v4.0: - L1 ABI, where MAC and PHY API configuration are split. - ACL has been split to low-level TCAM and Counters ABI to provide more HW ACL capabilities for future driver versions. To support backward support, the addition compatibility layer is required in the driver which will have two different codebase under "if FW-VER elif FW-VER else" conditions that will be removed in the future anyway, So, the idea was to break backward support and focus on more stable FW instead of supporting old version with very minimal and limited set of features/capabilities. Improve FW msg validation: * Use __le64, __le32, __le16 types in msg to/from FW to catch endian mismatch by sparse. * Use BUILD_BUG_ON for structures sent/recv to/from FW. Co-developed-by: Vadym Kochan <vkochan@marvell.com> Signed-off-by: Vadym Kochan <vkochan@marvell.com> Signed-off-by: Yevhen Orlov <yevhen.orlov@plvision.eu> Signed-off-by: Taras Chornyi <tchornyi@marvell.com> Signed-off-by: Volodymyr Mytnyk <vmytnyk@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-29 13:38:07 +08:00
__le32 port;
net: marvell: prestera: Add driver for Prestera family ASIC devices Marvell Prestera 98DX326x integrates up to 24 ports of 1GbE with 8 ports of 10GbE uplinks or 2 ports of 40Gbps stacking for a largely wireless SMB deployment. The current implementation supports only boards designed for the Marvell Switchdev solution and requires special firmware. The core Prestera switching logic is implemented in prestera_main.c, there is an intermediate hw layer between core logic and firmware. It is implemented in prestera_hw.c, the purpose of it is to encapsulate hw related logic, in future there is a plan to support more devices with different HW related configurations. This patch contains only basic switch initialization and RX/TX support over SDMA mechanism. Currently supported devices have DMA access range <= 32bit and require ZONE_DMA to be enabled, for such cases SDMA driver checks if the skb allocated in proper range supported by the Prestera device. Also meanwhile there is no TX interrupt support in current firmware version so recycling work is scheduled on each xmit. Port's mac address is generated from the switch base mac which may be provided via device-tree (static one or as nvme cell), or randomly generated. This is required by the firmware. Co-developed-by: Andrii Savka <andrii.savka@plvision.eu> Signed-off-by: Andrii Savka <andrii.savka@plvision.eu> Co-developed-by: Oleksandr Mazur <oleksandr.mazur@plvision.eu> Signed-off-by: Oleksandr Mazur <oleksandr.mazur@plvision.eu> Co-developed-by: Serhiy Boiko <serhiy.boiko@plvision.eu> Signed-off-by: Serhiy Boiko <serhiy.boiko@plvision.eu> Co-developed-by: Serhiy Pshyk <serhiy.pshyk@plvision.eu> Signed-off-by: Serhiy Pshyk <serhiy.pshyk@plvision.eu> Co-developed-by: Taras Chornyi <taras.chornyi@plvision.eu> Signed-off-by: Taras Chornyi <taras.chornyi@plvision.eu> Co-developed-by: Volodymyr Mytnyk <volodymyr.mytnyk@plvision.eu> Signed-off-by: Volodymyr Mytnyk <volodymyr.mytnyk@plvision.eu> Signed-off-by: Vadym Kochan <vadym.kochan@plvision.eu> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-17 00:30:57 +08:00
};
struct prestera_msg_port_info_resp {
struct prestera_msg_ret ret;
net: marvell: prestera: add firmware v4.0 support Add firmware (FW) version 4.0 support for Marvell Prestera driver. Major changes have been made to new v4.0 FW ABI to add support of new features, introduce the stability of the FW ABI and ensure better forward compatibility for the future driver vesrions. Current v4.0 FW feature set support does not expect any changes to ABI, as it was defined and tested through long period of time. The ABI may be extended in case of new features, but it will not break the backward compatibility. ABI major changes done in v4.0: - L1 ABI, where MAC and PHY API configuration are split. - ACL has been split to low-level TCAM and Counters ABI to provide more HW ACL capabilities for future driver versions. To support backward support, the addition compatibility layer is required in the driver which will have two different codebase under "if FW-VER elif FW-VER else" conditions that will be removed in the future anyway, So, the idea was to break backward support and focus on more stable FW instead of supporting old version with very minimal and limited set of features/capabilities. Improve FW msg validation: * Use __le64, __le32, __le16 types in msg to/from FW to catch endian mismatch by sparse. * Use BUILD_BUG_ON for structures sent/recv to/from FW. Co-developed-by: Vadym Kochan <vkochan@marvell.com> Signed-off-by: Vadym Kochan <vkochan@marvell.com> Signed-off-by: Yevhen Orlov <yevhen.orlov@plvision.eu> Signed-off-by: Taras Chornyi <tchornyi@marvell.com> Signed-off-by: Volodymyr Mytnyk <vmytnyk@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-29 13:38:07 +08:00
__le32 hw_id;
__le32 dev_id;
__le16 fp_id;
u8 pad[2];
net: marvell: prestera: Add driver for Prestera family ASIC devices Marvell Prestera 98DX326x integrates up to 24 ports of 1GbE with 8 ports of 10GbE uplinks or 2 ports of 40Gbps stacking for a largely wireless SMB deployment. The current implementation supports only boards designed for the Marvell Switchdev solution and requires special firmware. The core Prestera switching logic is implemented in prestera_main.c, there is an intermediate hw layer between core logic and firmware. It is implemented in prestera_hw.c, the purpose of it is to encapsulate hw related logic, in future there is a plan to support more devices with different HW related configurations. This patch contains only basic switch initialization and RX/TX support over SDMA mechanism. Currently supported devices have DMA access range <= 32bit and require ZONE_DMA to be enabled, for such cases SDMA driver checks if the skb allocated in proper range supported by the Prestera device. Also meanwhile there is no TX interrupt support in current firmware version so recycling work is scheduled on each xmit. Port's mac address is generated from the switch base mac which may be provided via device-tree (static one or as nvme cell), or randomly generated. This is required by the firmware. Co-developed-by: Andrii Savka <andrii.savka@plvision.eu> Signed-off-by: Andrii Savka <andrii.savka@plvision.eu> Co-developed-by: Oleksandr Mazur <oleksandr.mazur@plvision.eu> Signed-off-by: Oleksandr Mazur <oleksandr.mazur@plvision.eu> Co-developed-by: Serhiy Boiko <serhiy.boiko@plvision.eu> Signed-off-by: Serhiy Boiko <serhiy.boiko@plvision.eu> Co-developed-by: Serhiy Pshyk <serhiy.pshyk@plvision.eu> Signed-off-by: Serhiy Pshyk <serhiy.pshyk@plvision.eu> Co-developed-by: Taras Chornyi <taras.chornyi@plvision.eu> Signed-off-by: Taras Chornyi <taras.chornyi@plvision.eu> Co-developed-by: Volodymyr Mytnyk <volodymyr.mytnyk@plvision.eu> Signed-off-by: Volodymyr Mytnyk <volodymyr.mytnyk@plvision.eu> Signed-off-by: Vadym Kochan <vadym.kochan@plvision.eu> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-17 00:30:57 +08:00
};
struct prestera_msg_vlan_req {
struct prestera_msg_cmd cmd;
net: marvell: prestera: add firmware v4.0 support Add firmware (FW) version 4.0 support for Marvell Prestera driver. Major changes have been made to new v4.0 FW ABI to add support of new features, introduce the stability of the FW ABI and ensure better forward compatibility for the future driver vesrions. Current v4.0 FW feature set support does not expect any changes to ABI, as it was defined and tested through long period of time. The ABI may be extended in case of new features, but it will not break the backward compatibility. ABI major changes done in v4.0: - L1 ABI, where MAC and PHY API configuration are split. - ACL has been split to low-level TCAM and Counters ABI to provide more HW ACL capabilities for future driver versions. To support backward support, the addition compatibility layer is required in the driver which will have two different codebase under "if FW-VER elif FW-VER else" conditions that will be removed in the future anyway, So, the idea was to break backward support and focus on more stable FW instead of supporting old version with very minimal and limited set of features/capabilities. Improve FW msg validation: * Use __le64, __le32, __le16 types in msg to/from FW to catch endian mismatch by sparse. * Use BUILD_BUG_ON for structures sent/recv to/from FW. Co-developed-by: Vadym Kochan <vkochan@marvell.com> Signed-off-by: Vadym Kochan <vkochan@marvell.com> Signed-off-by: Yevhen Orlov <yevhen.orlov@plvision.eu> Signed-off-by: Taras Chornyi <tchornyi@marvell.com> Signed-off-by: Volodymyr Mytnyk <vmytnyk@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-29 13:38:07 +08:00
__le32 port;
__le32 dev;
__le16 vid;
u8 is_member;
u8 is_tagged;
};
struct prestera_msg_fdb_req {
struct prestera_msg_cmd cmd;
__le32 flush_mode;
union {
struct {
net: marvell: prestera: add firmware v4.0 support Add firmware (FW) version 4.0 support for Marvell Prestera driver. Major changes have been made to new v4.0 FW ABI to add support of new features, introduce the stability of the FW ABI and ensure better forward compatibility for the future driver vesrions. Current v4.0 FW feature set support does not expect any changes to ABI, as it was defined and tested through long period of time. The ABI may be extended in case of new features, but it will not break the backward compatibility. ABI major changes done in v4.0: - L1 ABI, where MAC and PHY API configuration are split. - ACL has been split to low-level TCAM and Counters ABI to provide more HW ACL capabilities for future driver versions. To support backward support, the addition compatibility layer is required in the driver which will have two different codebase under "if FW-VER elif FW-VER else" conditions that will be removed in the future anyway, So, the idea was to break backward support and focus on more stable FW instead of supporting old version with very minimal and limited set of features/capabilities. Improve FW msg validation: * Use __le64, __le32, __le16 types in msg to/from FW to catch endian mismatch by sparse. * Use BUILD_BUG_ON for structures sent/recv to/from FW. Co-developed-by: Vadym Kochan <vkochan@marvell.com> Signed-off-by: Vadym Kochan <vkochan@marvell.com> Signed-off-by: Yevhen Orlov <yevhen.orlov@plvision.eu> Signed-off-by: Taras Chornyi <tchornyi@marvell.com> Signed-off-by: Volodymyr Mytnyk <vmytnyk@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-29 13:38:07 +08:00
__le32 port;
__le32 dev;
};
net: marvell: prestera: add firmware v4.0 support Add firmware (FW) version 4.0 support for Marvell Prestera driver. Major changes have been made to new v4.0 FW ABI to add support of new features, introduce the stability of the FW ABI and ensure better forward compatibility for the future driver vesrions. Current v4.0 FW feature set support does not expect any changes to ABI, as it was defined and tested through long period of time. The ABI may be extended in case of new features, but it will not break the backward compatibility. ABI major changes done in v4.0: - L1 ABI, where MAC and PHY API configuration are split. - ACL has been split to low-level TCAM and Counters ABI to provide more HW ACL capabilities for future driver versions. To support backward support, the addition compatibility layer is required in the driver which will have two different codebase under "if FW-VER elif FW-VER else" conditions that will be removed in the future anyway, So, the idea was to break backward support and focus on more stable FW instead of supporting old version with very minimal and limited set of features/capabilities. Improve FW msg validation: * Use __le64, __le32, __le16 types in msg to/from FW to catch endian mismatch by sparse. * Use BUILD_BUG_ON for structures sent/recv to/from FW. Co-developed-by: Vadym Kochan <vkochan@marvell.com> Signed-off-by: Vadym Kochan <vkochan@marvell.com> Signed-off-by: Yevhen Orlov <yevhen.orlov@plvision.eu> Signed-off-by: Taras Chornyi <tchornyi@marvell.com> Signed-off-by: Volodymyr Mytnyk <vmytnyk@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-29 13:38:07 +08:00
__le16 lag_id;
} dest;
net: marvell: prestera: add firmware v4.0 support Add firmware (FW) version 4.0 support for Marvell Prestera driver. Major changes have been made to new v4.0 FW ABI to add support of new features, introduce the stability of the FW ABI and ensure better forward compatibility for the future driver vesrions. Current v4.0 FW feature set support does not expect any changes to ABI, as it was defined and tested through long period of time. The ABI may be extended in case of new features, but it will not break the backward compatibility. ABI major changes done in v4.0: - L1 ABI, where MAC and PHY API configuration are split. - ACL has been split to low-level TCAM and Counters ABI to provide more HW ACL capabilities for future driver versions. To support backward support, the addition compatibility layer is required in the driver which will have two different codebase under "if FW-VER elif FW-VER else" conditions that will be removed in the future anyway, So, the idea was to break backward support and focus on more stable FW instead of supporting old version with very minimal and limited set of features/capabilities. Improve FW msg validation: * Use __le64, __le32, __le16 types in msg to/from FW to catch endian mismatch by sparse. * Use BUILD_BUG_ON for structures sent/recv to/from FW. Co-developed-by: Vadym Kochan <vkochan@marvell.com> Signed-off-by: Vadym Kochan <vkochan@marvell.com> Signed-off-by: Yevhen Orlov <yevhen.orlov@plvision.eu> Signed-off-by: Taras Chornyi <tchornyi@marvell.com> Signed-off-by: Volodymyr Mytnyk <vmytnyk@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-29 13:38:07 +08:00
__le16 vid;
u8 dest_type;
u8 dynamic;
u8 mac[ETH_ALEN];
u8 __pad[2];
};
struct prestera_msg_bridge_req {
struct prestera_msg_cmd cmd;
net: marvell: prestera: add firmware v4.0 support Add firmware (FW) version 4.0 support for Marvell Prestera driver. Major changes have been made to new v4.0 FW ABI to add support of new features, introduce the stability of the FW ABI and ensure better forward compatibility for the future driver vesrions. Current v4.0 FW feature set support does not expect any changes to ABI, as it was defined and tested through long period of time. The ABI may be extended in case of new features, but it will not break the backward compatibility. ABI major changes done in v4.0: - L1 ABI, where MAC and PHY API configuration are split. - ACL has been split to low-level TCAM and Counters ABI to provide more HW ACL capabilities for future driver versions. To support backward support, the addition compatibility layer is required in the driver which will have two different codebase under "if FW-VER elif FW-VER else" conditions that will be removed in the future anyway, So, the idea was to break backward support and focus on more stable FW instead of supporting old version with very minimal and limited set of features/capabilities. Improve FW msg validation: * Use __le64, __le32, __le16 types in msg to/from FW to catch endian mismatch by sparse. * Use BUILD_BUG_ON for structures sent/recv to/from FW. Co-developed-by: Vadym Kochan <vkochan@marvell.com> Signed-off-by: Vadym Kochan <vkochan@marvell.com> Signed-off-by: Yevhen Orlov <yevhen.orlov@plvision.eu> Signed-off-by: Taras Chornyi <tchornyi@marvell.com> Signed-off-by: Volodymyr Mytnyk <vmytnyk@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-29 13:38:07 +08:00
__le32 port;
__le32 dev;
__le16 bridge;
u8 pad[2];
};
struct prestera_msg_bridge_resp {
struct prestera_msg_ret ret;
net: marvell: prestera: add firmware v4.0 support Add firmware (FW) version 4.0 support for Marvell Prestera driver. Major changes have been made to new v4.0 FW ABI to add support of new features, introduce the stability of the FW ABI and ensure better forward compatibility for the future driver vesrions. Current v4.0 FW feature set support does not expect any changes to ABI, as it was defined and tested through long period of time. The ABI may be extended in case of new features, but it will not break the backward compatibility. ABI major changes done in v4.0: - L1 ABI, where MAC and PHY API configuration are split. - ACL has been split to low-level TCAM and Counters ABI to provide more HW ACL capabilities for future driver versions. To support backward support, the addition compatibility layer is required in the driver which will have two different codebase under "if FW-VER elif FW-VER else" conditions that will be removed in the future anyway, So, the idea was to break backward support and focus on more stable FW instead of supporting old version with very minimal and limited set of features/capabilities. Improve FW msg validation: * Use __le64, __le32, __le16 types in msg to/from FW to catch endian mismatch by sparse. * Use BUILD_BUG_ON for structures sent/recv to/from FW. Co-developed-by: Vadym Kochan <vkochan@marvell.com> Signed-off-by: Vadym Kochan <vkochan@marvell.com> Signed-off-by: Yevhen Orlov <yevhen.orlov@plvision.eu> Signed-off-by: Taras Chornyi <tchornyi@marvell.com> Signed-off-by: Volodymyr Mytnyk <vmytnyk@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-29 13:38:07 +08:00
__le16 bridge;
u8 pad[2];
};
struct prestera_msg_vtcam_create_req {
struct prestera_msg_cmd cmd;
__le32 keymask[__PRESTERA_ACL_RULE_MATCH_TYPE_MAX];
u8 direction;
u8 lookup;
u8 pad[2];
};
struct prestera_msg_vtcam_destroy_req {
struct prestera_msg_cmd cmd;
__le32 vtcam_id;
};
struct prestera_msg_vtcam_rule_add_req {
struct prestera_msg_cmd cmd;
__le32 key[__PRESTERA_ACL_RULE_MATCH_TYPE_MAX];
__le32 keymask[__PRESTERA_ACL_RULE_MATCH_TYPE_MAX];
__le32 vtcam_id;
__le32 prio;
__le32 n_act;
};
struct prestera_msg_vtcam_rule_del_req {
struct prestera_msg_cmd cmd;
__le32 vtcam_id;
net: marvell: prestera: add firmware v4.0 support Add firmware (FW) version 4.0 support for Marvell Prestera driver. Major changes have been made to new v4.0 FW ABI to add support of new features, introduce the stability of the FW ABI and ensure better forward compatibility for the future driver vesrions. Current v4.0 FW feature set support does not expect any changes to ABI, as it was defined and tested through long period of time. The ABI may be extended in case of new features, but it will not break the backward compatibility. ABI major changes done in v4.0: - L1 ABI, where MAC and PHY API configuration are split. - ACL has been split to low-level TCAM and Counters ABI to provide more HW ACL capabilities for future driver versions. To support backward support, the addition compatibility layer is required in the driver which will have two different codebase under "if FW-VER elif FW-VER else" conditions that will be removed in the future anyway, So, the idea was to break backward support and focus on more stable FW instead of supporting old version with very minimal and limited set of features/capabilities. Improve FW msg validation: * Use __le64, __le32, __le16 types in msg to/from FW to catch endian mismatch by sparse. * Use BUILD_BUG_ON for structures sent/recv to/from FW. Co-developed-by: Vadym Kochan <vkochan@marvell.com> Signed-off-by: Vadym Kochan <vkochan@marvell.com> Signed-off-by: Yevhen Orlov <yevhen.orlov@plvision.eu> Signed-off-by: Taras Chornyi <tchornyi@marvell.com> Signed-off-by: Volodymyr Mytnyk <vmytnyk@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-29 13:38:07 +08:00
__le32 id;
};
struct prestera_msg_vtcam_bind_req {
struct prestera_msg_cmd cmd;
union {
struct {
__le32 hw_id;
__le32 dev_id;
} port;
__le32 index;
};
__le32 vtcam_id;
__le16 pcl_id;
__le16 type;
};
struct prestera_msg_vtcam_resp {
struct prestera_msg_ret ret;
__le32 vtcam_id;
__le32 rule_id;
};
struct prestera_msg_acl_action {
__le32 id;
__le32 __reserved;
union {
struct {
__le32 index;
} jump;
struct {
__le32 id;
} count;
__le32 reserved[6];
};
};
struct prestera_msg_counter_req {
struct prestera_msg_cmd cmd;
__le32 client;
__le32 block_id;
__le32 num_counters;
};
struct prestera_msg_counter_stats {
__le64 packets;
__le64 bytes;
};
struct prestera_msg_counter_resp {
struct prestera_msg_ret ret;
__le32 block_id;
__le32 offset;
__le32 num_counters;
__le32 done;
struct prestera_msg_counter_stats stats[];
};
struct prestera_msg_span_req {
struct prestera_msg_cmd cmd;
net: marvell: prestera: add firmware v4.0 support Add firmware (FW) version 4.0 support for Marvell Prestera driver. Major changes have been made to new v4.0 FW ABI to add support of new features, introduce the stability of the FW ABI and ensure better forward compatibility for the future driver vesrions. Current v4.0 FW feature set support does not expect any changes to ABI, as it was defined and tested through long period of time. The ABI may be extended in case of new features, but it will not break the backward compatibility. ABI major changes done in v4.0: - L1 ABI, where MAC and PHY API configuration are split. - ACL has been split to low-level TCAM and Counters ABI to provide more HW ACL capabilities for future driver versions. To support backward support, the addition compatibility layer is required in the driver which will have two different codebase under "if FW-VER elif FW-VER else" conditions that will be removed in the future anyway, So, the idea was to break backward support and focus on more stable FW instead of supporting old version with very minimal and limited set of features/capabilities. Improve FW msg validation: * Use __le64, __le32, __le16 types in msg to/from FW to catch endian mismatch by sparse. * Use BUILD_BUG_ON for structures sent/recv to/from FW. Co-developed-by: Vadym Kochan <vkochan@marvell.com> Signed-off-by: Vadym Kochan <vkochan@marvell.com> Signed-off-by: Yevhen Orlov <yevhen.orlov@plvision.eu> Signed-off-by: Taras Chornyi <tchornyi@marvell.com> Signed-off-by: Volodymyr Mytnyk <vmytnyk@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-29 13:38:07 +08:00
__le32 port;
__le32 dev;
u8 id;
u8 pad[3];
net: marvell: prestera: add firmware v4.0 support Add firmware (FW) version 4.0 support for Marvell Prestera driver. Major changes have been made to new v4.0 FW ABI to add support of new features, introduce the stability of the FW ABI and ensure better forward compatibility for the future driver vesrions. Current v4.0 FW feature set support does not expect any changes to ABI, as it was defined and tested through long period of time. The ABI may be extended in case of new features, but it will not break the backward compatibility. ABI major changes done in v4.0: - L1 ABI, where MAC and PHY API configuration are split. - ACL has been split to low-level TCAM and Counters ABI to provide more HW ACL capabilities for future driver versions. To support backward support, the addition compatibility layer is required in the driver which will have two different codebase under "if FW-VER elif FW-VER else" conditions that will be removed in the future anyway, So, the idea was to break backward support and focus on more stable FW instead of supporting old version with very minimal and limited set of features/capabilities. Improve FW msg validation: * Use __le64, __le32, __le16 types in msg to/from FW to catch endian mismatch by sparse. * Use BUILD_BUG_ON for structures sent/recv to/from FW. Co-developed-by: Vadym Kochan <vkochan@marvell.com> Signed-off-by: Vadym Kochan <vkochan@marvell.com> Signed-off-by: Yevhen Orlov <yevhen.orlov@plvision.eu> Signed-off-by: Taras Chornyi <tchornyi@marvell.com> Signed-off-by: Volodymyr Mytnyk <vmytnyk@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-29 13:38:07 +08:00
};
struct prestera_msg_span_resp {
struct prestera_msg_ret ret;
u8 id;
u8 pad[3];
net: marvell: prestera: add firmware v4.0 support Add firmware (FW) version 4.0 support for Marvell Prestera driver. Major changes have been made to new v4.0 FW ABI to add support of new features, introduce the stability of the FW ABI and ensure better forward compatibility for the future driver vesrions. Current v4.0 FW feature set support does not expect any changes to ABI, as it was defined and tested through long period of time. The ABI may be extended in case of new features, but it will not break the backward compatibility. ABI major changes done in v4.0: - L1 ABI, where MAC and PHY API configuration are split. - ACL has been split to low-level TCAM and Counters ABI to provide more HW ACL capabilities for future driver versions. To support backward support, the addition compatibility layer is required in the driver which will have two different codebase under "if FW-VER elif FW-VER else" conditions that will be removed in the future anyway, So, the idea was to break backward support and focus on more stable FW instead of supporting old version with very minimal and limited set of features/capabilities. Improve FW msg validation: * Use __le64, __le32, __le16 types in msg to/from FW to catch endian mismatch by sparse. * Use BUILD_BUG_ON for structures sent/recv to/from FW. Co-developed-by: Vadym Kochan <vkochan@marvell.com> Signed-off-by: Vadym Kochan <vkochan@marvell.com> Signed-off-by: Yevhen Orlov <yevhen.orlov@plvision.eu> Signed-off-by: Taras Chornyi <tchornyi@marvell.com> Signed-off-by: Volodymyr Mytnyk <vmytnyk@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-29 13:38:07 +08:00
};
struct prestera_msg_stp_req {
struct prestera_msg_cmd cmd;
net: marvell: prestera: add firmware v4.0 support Add firmware (FW) version 4.0 support for Marvell Prestera driver. Major changes have been made to new v4.0 FW ABI to add support of new features, introduce the stability of the FW ABI and ensure better forward compatibility for the future driver vesrions. Current v4.0 FW feature set support does not expect any changes to ABI, as it was defined and tested through long period of time. The ABI may be extended in case of new features, but it will not break the backward compatibility. ABI major changes done in v4.0: - L1 ABI, where MAC and PHY API configuration are split. - ACL has been split to low-level TCAM and Counters ABI to provide more HW ACL capabilities for future driver versions. To support backward support, the addition compatibility layer is required in the driver which will have two different codebase under "if FW-VER elif FW-VER else" conditions that will be removed in the future anyway, So, the idea was to break backward support and focus on more stable FW instead of supporting old version with very minimal and limited set of features/capabilities. Improve FW msg validation: * Use __le64, __le32, __le16 types in msg to/from FW to catch endian mismatch by sparse. * Use BUILD_BUG_ON for structures sent/recv to/from FW. Co-developed-by: Vadym Kochan <vkochan@marvell.com> Signed-off-by: Vadym Kochan <vkochan@marvell.com> Signed-off-by: Yevhen Orlov <yevhen.orlov@plvision.eu> Signed-off-by: Taras Chornyi <tchornyi@marvell.com> Signed-off-by: Volodymyr Mytnyk <vmytnyk@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-29 13:38:07 +08:00
__le32 port;
__le32 dev;
__le16 vid;
u8 state;
u8 __pad;
};
net: marvell: prestera: Add driver for Prestera family ASIC devices Marvell Prestera 98DX326x integrates up to 24 ports of 1GbE with 8 ports of 10GbE uplinks or 2 ports of 40Gbps stacking for a largely wireless SMB deployment. The current implementation supports only boards designed for the Marvell Switchdev solution and requires special firmware. The core Prestera switching logic is implemented in prestera_main.c, there is an intermediate hw layer between core logic and firmware. It is implemented in prestera_hw.c, the purpose of it is to encapsulate hw related logic, in future there is a plan to support more devices with different HW related configurations. This patch contains only basic switch initialization and RX/TX support over SDMA mechanism. Currently supported devices have DMA access range <= 32bit and require ZONE_DMA to be enabled, for such cases SDMA driver checks if the skb allocated in proper range supported by the Prestera device. Also meanwhile there is no TX interrupt support in current firmware version so recycling work is scheduled on each xmit. Port's mac address is generated from the switch base mac which may be provided via device-tree (static one or as nvme cell), or randomly generated. This is required by the firmware. Co-developed-by: Andrii Savka <andrii.savka@plvision.eu> Signed-off-by: Andrii Savka <andrii.savka@plvision.eu> Co-developed-by: Oleksandr Mazur <oleksandr.mazur@plvision.eu> Signed-off-by: Oleksandr Mazur <oleksandr.mazur@plvision.eu> Co-developed-by: Serhiy Boiko <serhiy.boiko@plvision.eu> Signed-off-by: Serhiy Boiko <serhiy.boiko@plvision.eu> Co-developed-by: Serhiy Pshyk <serhiy.pshyk@plvision.eu> Signed-off-by: Serhiy Pshyk <serhiy.pshyk@plvision.eu> Co-developed-by: Taras Chornyi <taras.chornyi@plvision.eu> Signed-off-by: Taras Chornyi <taras.chornyi@plvision.eu> Co-developed-by: Volodymyr Mytnyk <volodymyr.mytnyk@plvision.eu> Signed-off-by: Volodymyr Mytnyk <volodymyr.mytnyk@plvision.eu> Signed-off-by: Vadym Kochan <vadym.kochan@plvision.eu> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-17 00:30:57 +08:00
struct prestera_msg_rxtx_req {
struct prestera_msg_cmd cmd;
u8 use_sdma;
u8 pad[3];
net: marvell: prestera: Add driver for Prestera family ASIC devices Marvell Prestera 98DX326x integrates up to 24 ports of 1GbE with 8 ports of 10GbE uplinks or 2 ports of 40Gbps stacking for a largely wireless SMB deployment. The current implementation supports only boards designed for the Marvell Switchdev solution and requires special firmware. The core Prestera switching logic is implemented in prestera_main.c, there is an intermediate hw layer between core logic and firmware. It is implemented in prestera_hw.c, the purpose of it is to encapsulate hw related logic, in future there is a plan to support more devices with different HW related configurations. This patch contains only basic switch initialization and RX/TX support over SDMA mechanism. Currently supported devices have DMA access range <= 32bit and require ZONE_DMA to be enabled, for such cases SDMA driver checks if the skb allocated in proper range supported by the Prestera device. Also meanwhile there is no TX interrupt support in current firmware version so recycling work is scheduled on each xmit. Port's mac address is generated from the switch base mac which may be provided via device-tree (static one or as nvme cell), or randomly generated. This is required by the firmware. Co-developed-by: Andrii Savka <andrii.savka@plvision.eu> Signed-off-by: Andrii Savka <andrii.savka@plvision.eu> Co-developed-by: Oleksandr Mazur <oleksandr.mazur@plvision.eu> Signed-off-by: Oleksandr Mazur <oleksandr.mazur@plvision.eu> Co-developed-by: Serhiy Boiko <serhiy.boiko@plvision.eu> Signed-off-by: Serhiy Boiko <serhiy.boiko@plvision.eu> Co-developed-by: Serhiy Pshyk <serhiy.pshyk@plvision.eu> Signed-off-by: Serhiy Pshyk <serhiy.pshyk@plvision.eu> Co-developed-by: Taras Chornyi <taras.chornyi@plvision.eu> Signed-off-by: Taras Chornyi <taras.chornyi@plvision.eu> Co-developed-by: Volodymyr Mytnyk <volodymyr.mytnyk@plvision.eu> Signed-off-by: Volodymyr Mytnyk <volodymyr.mytnyk@plvision.eu> Signed-off-by: Vadym Kochan <vadym.kochan@plvision.eu> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-17 00:30:57 +08:00
};
struct prestera_msg_rxtx_resp {
struct prestera_msg_ret ret;
net: marvell: prestera: add firmware v4.0 support Add firmware (FW) version 4.0 support for Marvell Prestera driver. Major changes have been made to new v4.0 FW ABI to add support of new features, introduce the stability of the FW ABI and ensure better forward compatibility for the future driver vesrions. Current v4.0 FW feature set support does not expect any changes to ABI, as it was defined and tested through long period of time. The ABI may be extended in case of new features, but it will not break the backward compatibility. ABI major changes done in v4.0: - L1 ABI, where MAC and PHY API configuration are split. - ACL has been split to low-level TCAM and Counters ABI to provide more HW ACL capabilities for future driver versions. To support backward support, the addition compatibility layer is required in the driver which will have two different codebase under "if FW-VER elif FW-VER else" conditions that will be removed in the future anyway, So, the idea was to break backward support and focus on more stable FW instead of supporting old version with very minimal and limited set of features/capabilities. Improve FW msg validation: * Use __le64, __le32, __le16 types in msg to/from FW to catch endian mismatch by sparse. * Use BUILD_BUG_ON for structures sent/recv to/from FW. Co-developed-by: Vadym Kochan <vkochan@marvell.com> Signed-off-by: Vadym Kochan <vkochan@marvell.com> Signed-off-by: Yevhen Orlov <yevhen.orlov@plvision.eu> Signed-off-by: Taras Chornyi <tchornyi@marvell.com> Signed-off-by: Volodymyr Mytnyk <vmytnyk@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-29 13:38:07 +08:00
__le32 map_addr;
net: marvell: prestera: Add driver for Prestera family ASIC devices Marvell Prestera 98DX326x integrates up to 24 ports of 1GbE with 8 ports of 10GbE uplinks or 2 ports of 40Gbps stacking for a largely wireless SMB deployment. The current implementation supports only boards designed for the Marvell Switchdev solution and requires special firmware. The core Prestera switching logic is implemented in prestera_main.c, there is an intermediate hw layer between core logic and firmware. It is implemented in prestera_hw.c, the purpose of it is to encapsulate hw related logic, in future there is a plan to support more devices with different HW related configurations. This patch contains only basic switch initialization and RX/TX support over SDMA mechanism. Currently supported devices have DMA access range <= 32bit and require ZONE_DMA to be enabled, for such cases SDMA driver checks if the skb allocated in proper range supported by the Prestera device. Also meanwhile there is no TX interrupt support in current firmware version so recycling work is scheduled on each xmit. Port's mac address is generated from the switch base mac which may be provided via device-tree (static one or as nvme cell), or randomly generated. This is required by the firmware. Co-developed-by: Andrii Savka <andrii.savka@plvision.eu> Signed-off-by: Andrii Savka <andrii.savka@plvision.eu> Co-developed-by: Oleksandr Mazur <oleksandr.mazur@plvision.eu> Signed-off-by: Oleksandr Mazur <oleksandr.mazur@plvision.eu> Co-developed-by: Serhiy Boiko <serhiy.boiko@plvision.eu> Signed-off-by: Serhiy Boiko <serhiy.boiko@plvision.eu> Co-developed-by: Serhiy Pshyk <serhiy.pshyk@plvision.eu> Signed-off-by: Serhiy Pshyk <serhiy.pshyk@plvision.eu> Co-developed-by: Taras Chornyi <taras.chornyi@plvision.eu> Signed-off-by: Taras Chornyi <taras.chornyi@plvision.eu> Co-developed-by: Volodymyr Mytnyk <volodymyr.mytnyk@plvision.eu> Signed-off-by: Volodymyr Mytnyk <volodymyr.mytnyk@plvision.eu> Signed-off-by: Vadym Kochan <vadym.kochan@plvision.eu> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-17 00:30:57 +08:00
};
struct prestera_msg_iface {
union {
struct {
__le32 dev;
__le32 port;
};
__le16 lag_id;
};
__le16 vr_id;
__le16 vid;
u8 type;
u8 __pad[3];
};
struct prestera_msg_ip_addr {
union {
__be32 ipv4;
__be32 ipv6[4];
} u;
u8 v; /* e.g. PRESTERA_IPV4 */
u8 __pad[3];
};
struct prestera_msg_rif_req {
struct prestera_msg_cmd cmd;
struct prestera_msg_iface iif;
__le32 mtu;
__le16 rif_id;
__le16 __reserved;
u8 mac[ETH_ALEN];
u8 __pad[2];
};
struct prestera_msg_rif_resp {
struct prestera_msg_ret ret;
__le16 rif_id;
u8 __pad[2];
};
struct prestera_msg_lpm_req {
struct prestera_msg_cmd cmd;
struct prestera_msg_ip_addr dst;
__le32 grp_id;
__le32 dst_len;
__le16 vr_id;
u8 __pad[2];
};
struct prestera_msg_vr_req {
struct prestera_msg_cmd cmd;
__le16 vr_id;
u8 __pad[2];
};
struct prestera_msg_vr_resp {
struct prestera_msg_ret ret;
__le16 vr_id;
u8 __pad[2];
};
struct prestera_msg_lag_req {
struct prestera_msg_cmd cmd;
net: marvell: prestera: add firmware v4.0 support Add firmware (FW) version 4.0 support for Marvell Prestera driver. Major changes have been made to new v4.0 FW ABI to add support of new features, introduce the stability of the FW ABI and ensure better forward compatibility for the future driver vesrions. Current v4.0 FW feature set support does not expect any changes to ABI, as it was defined and tested through long period of time. The ABI may be extended in case of new features, but it will not break the backward compatibility. ABI major changes done in v4.0: - L1 ABI, where MAC and PHY API configuration are split. - ACL has been split to low-level TCAM and Counters ABI to provide more HW ACL capabilities for future driver versions. To support backward support, the addition compatibility layer is required in the driver which will have two different codebase under "if FW-VER elif FW-VER else" conditions that will be removed in the future anyway, So, the idea was to break backward support and focus on more stable FW instead of supporting old version with very minimal and limited set of features/capabilities. Improve FW msg validation: * Use __le64, __le32, __le16 types in msg to/from FW to catch endian mismatch by sparse. * Use BUILD_BUG_ON for structures sent/recv to/from FW. Co-developed-by: Vadym Kochan <vkochan@marvell.com> Signed-off-by: Vadym Kochan <vkochan@marvell.com> Signed-off-by: Yevhen Orlov <yevhen.orlov@plvision.eu> Signed-off-by: Taras Chornyi <tchornyi@marvell.com> Signed-off-by: Volodymyr Mytnyk <vmytnyk@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-29 13:38:07 +08:00
__le32 port;
__le32 dev;
__le16 lag_id;
u8 pad[2];
};
struct prestera_msg_cpu_code_counter_req {
struct prestera_msg_cmd cmd;
u8 counter_type;
u8 code;
u8 pad[2];
};
struct mvsw_msg_cpu_code_counter_ret {
struct prestera_msg_ret ret;
net: marvell: prestera: add firmware v4.0 support Add firmware (FW) version 4.0 support for Marvell Prestera driver. Major changes have been made to new v4.0 FW ABI to add support of new features, introduce the stability of the FW ABI and ensure better forward compatibility for the future driver vesrions. Current v4.0 FW feature set support does not expect any changes to ABI, as it was defined and tested through long period of time. The ABI may be extended in case of new features, but it will not break the backward compatibility. ABI major changes done in v4.0: - L1 ABI, where MAC and PHY API configuration are split. - ACL has been split to low-level TCAM and Counters ABI to provide more HW ACL capabilities for future driver versions. To support backward support, the addition compatibility layer is required in the driver which will have two different codebase under "if FW-VER elif FW-VER else" conditions that will be removed in the future anyway, So, the idea was to break backward support and focus on more stable FW instead of supporting old version with very minimal and limited set of features/capabilities. Improve FW msg validation: * Use __le64, __le32, __le16 types in msg to/from FW to catch endian mismatch by sparse. * Use BUILD_BUG_ON for structures sent/recv to/from FW. Co-developed-by: Vadym Kochan <vkochan@marvell.com> Signed-off-by: Vadym Kochan <vkochan@marvell.com> Signed-off-by: Yevhen Orlov <yevhen.orlov@plvision.eu> Signed-off-by: Taras Chornyi <tchornyi@marvell.com> Signed-off-by: Volodymyr Mytnyk <vmytnyk@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-29 13:38:07 +08:00
__le64 packet_count;
};
net: marvell: prestera: Add driver for Prestera family ASIC devices Marvell Prestera 98DX326x integrates up to 24 ports of 1GbE with 8 ports of 10GbE uplinks or 2 ports of 40Gbps stacking for a largely wireless SMB deployment. The current implementation supports only boards designed for the Marvell Switchdev solution and requires special firmware. The core Prestera switching logic is implemented in prestera_main.c, there is an intermediate hw layer between core logic and firmware. It is implemented in prestera_hw.c, the purpose of it is to encapsulate hw related logic, in future there is a plan to support more devices with different HW related configurations. This patch contains only basic switch initialization and RX/TX support over SDMA mechanism. Currently supported devices have DMA access range <= 32bit and require ZONE_DMA to be enabled, for such cases SDMA driver checks if the skb allocated in proper range supported by the Prestera device. Also meanwhile there is no TX interrupt support in current firmware version so recycling work is scheduled on each xmit. Port's mac address is generated from the switch base mac which may be provided via device-tree (static one or as nvme cell), or randomly generated. This is required by the firmware. Co-developed-by: Andrii Savka <andrii.savka@plvision.eu> Signed-off-by: Andrii Savka <andrii.savka@plvision.eu> Co-developed-by: Oleksandr Mazur <oleksandr.mazur@plvision.eu> Signed-off-by: Oleksandr Mazur <oleksandr.mazur@plvision.eu> Co-developed-by: Serhiy Boiko <serhiy.boiko@plvision.eu> Signed-off-by: Serhiy Boiko <serhiy.boiko@plvision.eu> Co-developed-by: Serhiy Pshyk <serhiy.pshyk@plvision.eu> Signed-off-by: Serhiy Pshyk <serhiy.pshyk@plvision.eu> Co-developed-by: Taras Chornyi <taras.chornyi@plvision.eu> Signed-off-by: Taras Chornyi <taras.chornyi@plvision.eu> Co-developed-by: Volodymyr Mytnyk <volodymyr.mytnyk@plvision.eu> Signed-off-by: Volodymyr Mytnyk <volodymyr.mytnyk@plvision.eu> Signed-off-by: Vadym Kochan <vadym.kochan@plvision.eu> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-17 00:30:57 +08:00
struct prestera_msg_event {
net: marvell: prestera: add firmware v4.0 support Add firmware (FW) version 4.0 support for Marvell Prestera driver. Major changes have been made to new v4.0 FW ABI to add support of new features, introduce the stability of the FW ABI and ensure better forward compatibility for the future driver vesrions. Current v4.0 FW feature set support does not expect any changes to ABI, as it was defined and tested through long period of time. The ABI may be extended in case of new features, but it will not break the backward compatibility. ABI major changes done in v4.0: - L1 ABI, where MAC and PHY API configuration are split. - ACL has been split to low-level TCAM and Counters ABI to provide more HW ACL capabilities for future driver versions. To support backward support, the addition compatibility layer is required in the driver which will have two different codebase under "if FW-VER elif FW-VER else" conditions that will be removed in the future anyway, So, the idea was to break backward support and focus on more stable FW instead of supporting old version with very minimal and limited set of features/capabilities. Improve FW msg validation: * Use __le64, __le32, __le16 types in msg to/from FW to catch endian mismatch by sparse. * Use BUILD_BUG_ON for structures sent/recv to/from FW. Co-developed-by: Vadym Kochan <vkochan@marvell.com> Signed-off-by: Vadym Kochan <vkochan@marvell.com> Signed-off-by: Yevhen Orlov <yevhen.orlov@plvision.eu> Signed-off-by: Taras Chornyi <tchornyi@marvell.com> Signed-off-by: Volodymyr Mytnyk <vmytnyk@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-29 13:38:07 +08:00
__le16 type;
__le16 id;
net: marvell: prestera: Add driver for Prestera family ASIC devices Marvell Prestera 98DX326x integrates up to 24 ports of 1GbE with 8 ports of 10GbE uplinks or 2 ports of 40Gbps stacking for a largely wireless SMB deployment. The current implementation supports only boards designed for the Marvell Switchdev solution and requires special firmware. The core Prestera switching logic is implemented in prestera_main.c, there is an intermediate hw layer between core logic and firmware. It is implemented in prestera_hw.c, the purpose of it is to encapsulate hw related logic, in future there is a plan to support more devices with different HW related configurations. This patch contains only basic switch initialization and RX/TX support over SDMA mechanism. Currently supported devices have DMA access range <= 32bit and require ZONE_DMA to be enabled, for such cases SDMA driver checks if the skb allocated in proper range supported by the Prestera device. Also meanwhile there is no TX interrupt support in current firmware version so recycling work is scheduled on each xmit. Port's mac address is generated from the switch base mac which may be provided via device-tree (static one or as nvme cell), or randomly generated. This is required by the firmware. Co-developed-by: Andrii Savka <andrii.savka@plvision.eu> Signed-off-by: Andrii Savka <andrii.savka@plvision.eu> Co-developed-by: Oleksandr Mazur <oleksandr.mazur@plvision.eu> Signed-off-by: Oleksandr Mazur <oleksandr.mazur@plvision.eu> Co-developed-by: Serhiy Boiko <serhiy.boiko@plvision.eu> Signed-off-by: Serhiy Boiko <serhiy.boiko@plvision.eu> Co-developed-by: Serhiy Pshyk <serhiy.pshyk@plvision.eu> Signed-off-by: Serhiy Pshyk <serhiy.pshyk@plvision.eu> Co-developed-by: Taras Chornyi <taras.chornyi@plvision.eu> Signed-off-by: Taras Chornyi <taras.chornyi@plvision.eu> Co-developed-by: Volodymyr Mytnyk <volodymyr.mytnyk@plvision.eu> Signed-off-by: Volodymyr Mytnyk <volodymyr.mytnyk@plvision.eu> Signed-off-by: Vadym Kochan <vadym.kochan@plvision.eu> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-17 00:30:57 +08:00
};
struct prestera_msg_event_port {
struct prestera_msg_event id;
net: marvell: prestera: add firmware v4.0 support Add firmware (FW) version 4.0 support for Marvell Prestera driver. Major changes have been made to new v4.0 FW ABI to add support of new features, introduce the stability of the FW ABI and ensure better forward compatibility for the future driver vesrions. Current v4.0 FW feature set support does not expect any changes to ABI, as it was defined and tested through long period of time. The ABI may be extended in case of new features, but it will not break the backward compatibility. ABI major changes done in v4.0: - L1 ABI, where MAC and PHY API configuration are split. - ACL has been split to low-level TCAM and Counters ABI to provide more HW ACL capabilities for future driver versions. To support backward support, the addition compatibility layer is required in the driver which will have two different codebase under "if FW-VER elif FW-VER else" conditions that will be removed in the future anyway, So, the idea was to break backward support and focus on more stable FW instead of supporting old version with very minimal and limited set of features/capabilities. Improve FW msg validation: * Use __le64, __le32, __le16 types in msg to/from FW to catch endian mismatch by sparse. * Use BUILD_BUG_ON for structures sent/recv to/from FW. Co-developed-by: Vadym Kochan <vkochan@marvell.com> Signed-off-by: Vadym Kochan <vkochan@marvell.com> Signed-off-by: Yevhen Orlov <yevhen.orlov@plvision.eu> Signed-off-by: Taras Chornyi <tchornyi@marvell.com> Signed-off-by: Volodymyr Mytnyk <vmytnyk@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-29 13:38:07 +08:00
__le32 port_id;
struct prestera_msg_event_port_param param;
net: marvell: prestera: Add driver for Prestera family ASIC devices Marvell Prestera 98DX326x integrates up to 24 ports of 1GbE with 8 ports of 10GbE uplinks or 2 ports of 40Gbps stacking for a largely wireless SMB deployment. The current implementation supports only boards designed for the Marvell Switchdev solution and requires special firmware. The core Prestera switching logic is implemented in prestera_main.c, there is an intermediate hw layer between core logic and firmware. It is implemented in prestera_hw.c, the purpose of it is to encapsulate hw related logic, in future there is a plan to support more devices with different HW related configurations. This patch contains only basic switch initialization and RX/TX support over SDMA mechanism. Currently supported devices have DMA access range <= 32bit and require ZONE_DMA to be enabled, for such cases SDMA driver checks if the skb allocated in proper range supported by the Prestera device. Also meanwhile there is no TX interrupt support in current firmware version so recycling work is scheduled on each xmit. Port's mac address is generated from the switch base mac which may be provided via device-tree (static one or as nvme cell), or randomly generated. This is required by the firmware. Co-developed-by: Andrii Savka <andrii.savka@plvision.eu> Signed-off-by: Andrii Savka <andrii.savka@plvision.eu> Co-developed-by: Oleksandr Mazur <oleksandr.mazur@plvision.eu> Signed-off-by: Oleksandr Mazur <oleksandr.mazur@plvision.eu> Co-developed-by: Serhiy Boiko <serhiy.boiko@plvision.eu> Signed-off-by: Serhiy Boiko <serhiy.boiko@plvision.eu> Co-developed-by: Serhiy Pshyk <serhiy.pshyk@plvision.eu> Signed-off-by: Serhiy Pshyk <serhiy.pshyk@plvision.eu> Co-developed-by: Taras Chornyi <taras.chornyi@plvision.eu> Signed-off-by: Taras Chornyi <taras.chornyi@plvision.eu> Co-developed-by: Volodymyr Mytnyk <volodymyr.mytnyk@plvision.eu> Signed-off-by: Volodymyr Mytnyk <volodymyr.mytnyk@plvision.eu> Signed-off-by: Vadym Kochan <vadym.kochan@plvision.eu> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-17 00:30:57 +08:00
};
union prestera_msg_event_fdb_param {
u8 mac[ETH_ALEN];
};
struct prestera_msg_event_fdb {
struct prestera_msg_event id;
__le32 vid;
union {
net: marvell: prestera: add firmware v4.0 support Add firmware (FW) version 4.0 support for Marvell Prestera driver. Major changes have been made to new v4.0 FW ABI to add support of new features, introduce the stability of the FW ABI and ensure better forward compatibility for the future driver vesrions. Current v4.0 FW feature set support does not expect any changes to ABI, as it was defined and tested through long period of time. The ABI may be extended in case of new features, but it will not break the backward compatibility. ABI major changes done in v4.0: - L1 ABI, where MAC and PHY API configuration are split. - ACL has been split to low-level TCAM and Counters ABI to provide more HW ACL capabilities for future driver versions. To support backward support, the addition compatibility layer is required in the driver which will have two different codebase under "if FW-VER elif FW-VER else" conditions that will be removed in the future anyway, So, the idea was to break backward support and focus on more stable FW instead of supporting old version with very minimal and limited set of features/capabilities. Improve FW msg validation: * Use __le64, __le32, __le16 types in msg to/from FW to catch endian mismatch by sparse. * Use BUILD_BUG_ON for structures sent/recv to/from FW. Co-developed-by: Vadym Kochan <vkochan@marvell.com> Signed-off-by: Vadym Kochan <vkochan@marvell.com> Signed-off-by: Yevhen Orlov <yevhen.orlov@plvision.eu> Signed-off-by: Taras Chornyi <tchornyi@marvell.com> Signed-off-by: Volodymyr Mytnyk <vmytnyk@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-29 13:38:07 +08:00
__le32 port_id;
__le16 lag_id;
} dest;
union prestera_msg_event_fdb_param param;
u8 dest_type;
};
net: marvell: prestera: add firmware v4.0 support Add firmware (FW) version 4.0 support for Marvell Prestera driver. Major changes have been made to new v4.0 FW ABI to add support of new features, introduce the stability of the FW ABI and ensure better forward compatibility for the future driver vesrions. Current v4.0 FW feature set support does not expect any changes to ABI, as it was defined and tested through long period of time. The ABI may be extended in case of new features, but it will not break the backward compatibility. ABI major changes done in v4.0: - L1 ABI, where MAC and PHY API configuration are split. - ACL has been split to low-level TCAM and Counters ABI to provide more HW ACL capabilities for future driver versions. To support backward support, the addition compatibility layer is required in the driver which will have two different codebase under "if FW-VER elif FW-VER else" conditions that will be removed in the future anyway, So, the idea was to break backward support and focus on more stable FW instead of supporting old version with very minimal and limited set of features/capabilities. Improve FW msg validation: * Use __le64, __le32, __le16 types in msg to/from FW to catch endian mismatch by sparse. * Use BUILD_BUG_ON for structures sent/recv to/from FW. Co-developed-by: Vadym Kochan <vkochan@marvell.com> Signed-off-by: Vadym Kochan <vkochan@marvell.com> Signed-off-by: Yevhen Orlov <yevhen.orlov@plvision.eu> Signed-off-by: Taras Chornyi <tchornyi@marvell.com> Signed-off-by: Volodymyr Mytnyk <vmytnyk@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-29 13:38:07 +08:00
static void prestera_hw_build_tests(void)
net: marvell: prestera: add firmware v4.0 support Add firmware (FW) version 4.0 support for Marvell Prestera driver. Major changes have been made to new v4.0 FW ABI to add support of new features, introduce the stability of the FW ABI and ensure better forward compatibility for the future driver vesrions. Current v4.0 FW feature set support does not expect any changes to ABI, as it was defined and tested through long period of time. The ABI may be extended in case of new features, but it will not break the backward compatibility. ABI major changes done in v4.0: - L1 ABI, where MAC and PHY API configuration are split. - ACL has been split to low-level TCAM and Counters ABI to provide more HW ACL capabilities for future driver versions. To support backward support, the addition compatibility layer is required in the driver which will have two different codebase under "if FW-VER elif FW-VER else" conditions that will be removed in the future anyway, So, the idea was to break backward support and focus on more stable FW instead of supporting old version with very minimal and limited set of features/capabilities. Improve FW msg validation: * Use __le64, __le32, __le16 types in msg to/from FW to catch endian mismatch by sparse. * Use BUILD_BUG_ON for structures sent/recv to/from FW. Co-developed-by: Vadym Kochan <vkochan@marvell.com> Signed-off-by: Vadym Kochan <vkochan@marvell.com> Signed-off-by: Yevhen Orlov <yevhen.orlov@plvision.eu> Signed-off-by: Taras Chornyi <tchornyi@marvell.com> Signed-off-by: Volodymyr Mytnyk <vmytnyk@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-29 13:38:07 +08:00
{
/* check requests */
BUILD_BUG_ON(sizeof(struct prestera_msg_common_req) != 4);
BUILD_BUG_ON(sizeof(struct prestera_msg_switch_attr_req) != 16);
BUILD_BUG_ON(sizeof(struct prestera_msg_port_attr_req) != 144);
net: marvell: prestera: add firmware v4.0 support Add firmware (FW) version 4.0 support for Marvell Prestera driver. Major changes have been made to new v4.0 FW ABI to add support of new features, introduce the stability of the FW ABI and ensure better forward compatibility for the future driver vesrions. Current v4.0 FW feature set support does not expect any changes to ABI, as it was defined and tested through long period of time. The ABI may be extended in case of new features, but it will not break the backward compatibility. ABI major changes done in v4.0: - L1 ABI, where MAC and PHY API configuration are split. - ACL has been split to low-level TCAM and Counters ABI to provide more HW ACL capabilities for future driver versions. To support backward support, the addition compatibility layer is required in the driver which will have two different codebase under "if FW-VER elif FW-VER else" conditions that will be removed in the future anyway, So, the idea was to break backward support and focus on more stable FW instead of supporting old version with very minimal and limited set of features/capabilities. Improve FW msg validation: * Use __le64, __le32, __le16 types in msg to/from FW to catch endian mismatch by sparse. * Use BUILD_BUG_ON for structures sent/recv to/from FW. Co-developed-by: Vadym Kochan <vkochan@marvell.com> Signed-off-by: Vadym Kochan <vkochan@marvell.com> Signed-off-by: Yevhen Orlov <yevhen.orlov@plvision.eu> Signed-off-by: Taras Chornyi <tchornyi@marvell.com> Signed-off-by: Volodymyr Mytnyk <vmytnyk@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-29 13:38:07 +08:00
BUILD_BUG_ON(sizeof(struct prestera_msg_port_info_req) != 8);
BUILD_BUG_ON(sizeof(struct prestera_msg_vlan_req) != 16);
BUILD_BUG_ON(sizeof(struct prestera_msg_fdb_req) != 28);
BUILD_BUG_ON(sizeof(struct prestera_msg_bridge_req) != 16);
BUILD_BUG_ON(sizeof(struct prestera_msg_span_req) != 16);
BUILD_BUG_ON(sizeof(struct prestera_msg_stp_req) != 16);
BUILD_BUG_ON(sizeof(struct prestera_msg_rxtx_req) != 8);
BUILD_BUG_ON(sizeof(struct prestera_msg_lag_req) != 16);
BUILD_BUG_ON(sizeof(struct prestera_msg_cpu_code_counter_req) != 8);
BUILD_BUG_ON(sizeof(struct prestera_msg_vtcam_create_req) != 84);
BUILD_BUG_ON(sizeof(struct prestera_msg_vtcam_destroy_req) != 8);
BUILD_BUG_ON(sizeof(struct prestera_msg_vtcam_rule_add_req) != 168);
BUILD_BUG_ON(sizeof(struct prestera_msg_vtcam_rule_del_req) != 12);
BUILD_BUG_ON(sizeof(struct prestera_msg_vtcam_bind_req) != 20);
BUILD_BUG_ON(sizeof(struct prestera_msg_acl_action) != 32);
BUILD_BUG_ON(sizeof(struct prestera_msg_counter_req) != 16);
BUILD_BUG_ON(sizeof(struct prestera_msg_counter_stats) != 16);
BUILD_BUG_ON(sizeof(struct prestera_msg_rif_req) != 36);
BUILD_BUG_ON(sizeof(struct prestera_msg_vr_req) != 8);
BUILD_BUG_ON(sizeof(struct prestera_msg_lpm_req) != 36);
net: marvell: prestera: add firmware v4.0 support Add firmware (FW) version 4.0 support for Marvell Prestera driver. Major changes have been made to new v4.0 FW ABI to add support of new features, introduce the stability of the FW ABI and ensure better forward compatibility for the future driver vesrions. Current v4.0 FW feature set support does not expect any changes to ABI, as it was defined and tested through long period of time. The ABI may be extended in case of new features, but it will not break the backward compatibility. ABI major changes done in v4.0: - L1 ABI, where MAC and PHY API configuration are split. - ACL has been split to low-level TCAM and Counters ABI to provide more HW ACL capabilities for future driver versions. To support backward support, the addition compatibility layer is required in the driver which will have two different codebase under "if FW-VER elif FW-VER else" conditions that will be removed in the future anyway, So, the idea was to break backward support and focus on more stable FW instead of supporting old version with very minimal and limited set of features/capabilities. Improve FW msg validation: * Use __le64, __le32, __le16 types in msg to/from FW to catch endian mismatch by sparse. * Use BUILD_BUG_ON for structures sent/recv to/from FW. Co-developed-by: Vadym Kochan <vkochan@marvell.com> Signed-off-by: Vadym Kochan <vkochan@marvell.com> Signed-off-by: Yevhen Orlov <yevhen.orlov@plvision.eu> Signed-off-by: Taras Chornyi <tchornyi@marvell.com> Signed-off-by: Volodymyr Mytnyk <vmytnyk@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-29 13:38:07 +08:00
/* structure that are part of req/resp fw messages */
BUILD_BUG_ON(sizeof(struct prestera_msg_iface) != 16);
BUILD_BUG_ON(sizeof(struct prestera_msg_ip_addr) != 20);
net: marvell: prestera: add firmware v4.0 support Add firmware (FW) version 4.0 support for Marvell Prestera driver. Major changes have been made to new v4.0 FW ABI to add support of new features, introduce the stability of the FW ABI and ensure better forward compatibility for the future driver vesrions. Current v4.0 FW feature set support does not expect any changes to ABI, as it was defined and tested through long period of time. The ABI may be extended in case of new features, but it will not break the backward compatibility. ABI major changes done in v4.0: - L1 ABI, where MAC and PHY API configuration are split. - ACL has been split to low-level TCAM and Counters ABI to provide more HW ACL capabilities for future driver versions. To support backward support, the addition compatibility layer is required in the driver which will have two different codebase under "if FW-VER elif FW-VER else" conditions that will be removed in the future anyway, So, the idea was to break backward support and focus on more stable FW instead of supporting old version with very minimal and limited set of features/capabilities. Improve FW msg validation: * Use __le64, __le32, __le16 types in msg to/from FW to catch endian mismatch by sparse. * Use BUILD_BUG_ON for structures sent/recv to/from FW. Co-developed-by: Vadym Kochan <vkochan@marvell.com> Signed-off-by: Vadym Kochan <vkochan@marvell.com> Signed-off-by: Yevhen Orlov <yevhen.orlov@plvision.eu> Signed-off-by: Taras Chornyi <tchornyi@marvell.com> Signed-off-by: Volodymyr Mytnyk <vmytnyk@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-29 13:38:07 +08:00
/* check responses */
BUILD_BUG_ON(sizeof(struct prestera_msg_common_resp) != 8);
BUILD_BUG_ON(sizeof(struct prestera_msg_switch_init_resp) != 24);
BUILD_BUG_ON(sizeof(struct prestera_msg_port_attr_resp) != 136);
net: marvell: prestera: add firmware v4.0 support Add firmware (FW) version 4.0 support for Marvell Prestera driver. Major changes have been made to new v4.0 FW ABI to add support of new features, introduce the stability of the FW ABI and ensure better forward compatibility for the future driver vesrions. Current v4.0 FW feature set support does not expect any changes to ABI, as it was defined and tested through long period of time. The ABI may be extended in case of new features, but it will not break the backward compatibility. ABI major changes done in v4.0: - L1 ABI, where MAC and PHY API configuration are split. - ACL has been split to low-level TCAM and Counters ABI to provide more HW ACL capabilities for future driver versions. To support backward support, the addition compatibility layer is required in the driver which will have two different codebase under "if FW-VER elif FW-VER else" conditions that will be removed in the future anyway, So, the idea was to break backward support and focus on more stable FW instead of supporting old version with very minimal and limited set of features/capabilities. Improve FW msg validation: * Use __le64, __le32, __le16 types in msg to/from FW to catch endian mismatch by sparse. * Use BUILD_BUG_ON for structures sent/recv to/from FW. Co-developed-by: Vadym Kochan <vkochan@marvell.com> Signed-off-by: Vadym Kochan <vkochan@marvell.com> Signed-off-by: Yevhen Orlov <yevhen.orlov@plvision.eu> Signed-off-by: Taras Chornyi <tchornyi@marvell.com> Signed-off-by: Volodymyr Mytnyk <vmytnyk@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-29 13:38:07 +08:00
BUILD_BUG_ON(sizeof(struct prestera_msg_port_stats_resp) != 248);
BUILD_BUG_ON(sizeof(struct prestera_msg_port_info_resp) != 20);
BUILD_BUG_ON(sizeof(struct prestera_msg_bridge_resp) != 12);
BUILD_BUG_ON(sizeof(struct prestera_msg_span_resp) != 12);
BUILD_BUG_ON(sizeof(struct prestera_msg_rxtx_resp) != 12);
BUILD_BUG_ON(sizeof(struct prestera_msg_vtcam_resp) != 16);
BUILD_BUG_ON(sizeof(struct prestera_msg_counter_resp) != 24);
BUILD_BUG_ON(sizeof(struct prestera_msg_rif_resp) != 12);
BUILD_BUG_ON(sizeof(struct prestera_msg_vr_resp) != 12);
net: marvell: prestera: add firmware v4.0 support Add firmware (FW) version 4.0 support for Marvell Prestera driver. Major changes have been made to new v4.0 FW ABI to add support of new features, introduce the stability of the FW ABI and ensure better forward compatibility for the future driver vesrions. Current v4.0 FW feature set support does not expect any changes to ABI, as it was defined and tested through long period of time. The ABI may be extended in case of new features, but it will not break the backward compatibility. ABI major changes done in v4.0: - L1 ABI, where MAC and PHY API configuration are split. - ACL has been split to low-level TCAM and Counters ABI to provide more HW ACL capabilities for future driver versions. To support backward support, the addition compatibility layer is required in the driver which will have two different codebase under "if FW-VER elif FW-VER else" conditions that will be removed in the future anyway, So, the idea was to break backward support and focus on more stable FW instead of supporting old version with very minimal and limited set of features/capabilities. Improve FW msg validation: * Use __le64, __le32, __le16 types in msg to/from FW to catch endian mismatch by sparse. * Use BUILD_BUG_ON for structures sent/recv to/from FW. Co-developed-by: Vadym Kochan <vkochan@marvell.com> Signed-off-by: Vadym Kochan <vkochan@marvell.com> Signed-off-by: Yevhen Orlov <yevhen.orlov@plvision.eu> Signed-off-by: Taras Chornyi <tchornyi@marvell.com> Signed-off-by: Volodymyr Mytnyk <vmytnyk@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-29 13:38:07 +08:00
/* check events */
BUILD_BUG_ON(sizeof(struct prestera_msg_event_port) != 20);
BUILD_BUG_ON(sizeof(struct prestera_msg_event_fdb) != 20);
}
static u8 prestera_hw_mdix_to_eth(u8 mode);
static void prestera_hw_remote_fc_to_eth(u8 fc, bool *pause, bool *asym_pause);
net: marvell: prestera: Add driver for Prestera family ASIC devices Marvell Prestera 98DX326x integrates up to 24 ports of 1GbE with 8 ports of 10GbE uplinks or 2 ports of 40Gbps stacking for a largely wireless SMB deployment. The current implementation supports only boards designed for the Marvell Switchdev solution and requires special firmware. The core Prestera switching logic is implemented in prestera_main.c, there is an intermediate hw layer between core logic and firmware. It is implemented in prestera_hw.c, the purpose of it is to encapsulate hw related logic, in future there is a plan to support more devices with different HW related configurations. This patch contains only basic switch initialization and RX/TX support over SDMA mechanism. Currently supported devices have DMA access range <= 32bit and require ZONE_DMA to be enabled, for such cases SDMA driver checks if the skb allocated in proper range supported by the Prestera device. Also meanwhile there is no TX interrupt support in current firmware version so recycling work is scheduled on each xmit. Port's mac address is generated from the switch base mac which may be provided via device-tree (static one or as nvme cell), or randomly generated. This is required by the firmware. Co-developed-by: Andrii Savka <andrii.savka@plvision.eu> Signed-off-by: Andrii Savka <andrii.savka@plvision.eu> Co-developed-by: Oleksandr Mazur <oleksandr.mazur@plvision.eu> Signed-off-by: Oleksandr Mazur <oleksandr.mazur@plvision.eu> Co-developed-by: Serhiy Boiko <serhiy.boiko@plvision.eu> Signed-off-by: Serhiy Boiko <serhiy.boiko@plvision.eu> Co-developed-by: Serhiy Pshyk <serhiy.pshyk@plvision.eu> Signed-off-by: Serhiy Pshyk <serhiy.pshyk@plvision.eu> Co-developed-by: Taras Chornyi <taras.chornyi@plvision.eu> Signed-off-by: Taras Chornyi <taras.chornyi@plvision.eu> Co-developed-by: Volodymyr Mytnyk <volodymyr.mytnyk@plvision.eu> Signed-off-by: Volodymyr Mytnyk <volodymyr.mytnyk@plvision.eu> Signed-off-by: Vadym Kochan <vadym.kochan@plvision.eu> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-17 00:30:57 +08:00
static int __prestera_cmd_ret(struct prestera_switch *sw,
enum prestera_cmd_type_t type,
struct prestera_msg_cmd *cmd, size_t clen,
struct prestera_msg_ret *ret, size_t rlen,
int waitms)
{
struct prestera_device *dev = sw->dev;
int err;
net: marvell: prestera: add firmware v4.0 support Add firmware (FW) version 4.0 support for Marvell Prestera driver. Major changes have been made to new v4.0 FW ABI to add support of new features, introduce the stability of the FW ABI and ensure better forward compatibility for the future driver vesrions. Current v4.0 FW feature set support does not expect any changes to ABI, as it was defined and tested through long period of time. The ABI may be extended in case of new features, but it will not break the backward compatibility. ABI major changes done in v4.0: - L1 ABI, where MAC and PHY API configuration are split. - ACL has been split to low-level TCAM and Counters ABI to provide more HW ACL capabilities for future driver versions. To support backward support, the addition compatibility layer is required in the driver which will have two different codebase under "if FW-VER elif FW-VER else" conditions that will be removed in the future anyway, So, the idea was to break backward support and focus on more stable FW instead of supporting old version with very minimal and limited set of features/capabilities. Improve FW msg validation: * Use __le64, __le32, __le16 types in msg to/from FW to catch endian mismatch by sparse. * Use BUILD_BUG_ON for structures sent/recv to/from FW. Co-developed-by: Vadym Kochan <vkochan@marvell.com> Signed-off-by: Vadym Kochan <vkochan@marvell.com> Signed-off-by: Yevhen Orlov <yevhen.orlov@plvision.eu> Signed-off-by: Taras Chornyi <tchornyi@marvell.com> Signed-off-by: Volodymyr Mytnyk <vmytnyk@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-29 13:38:07 +08:00
cmd->type = __cpu_to_le32(type);
net: marvell: prestera: Add driver for Prestera family ASIC devices Marvell Prestera 98DX326x integrates up to 24 ports of 1GbE with 8 ports of 10GbE uplinks or 2 ports of 40Gbps stacking for a largely wireless SMB deployment. The current implementation supports only boards designed for the Marvell Switchdev solution and requires special firmware. The core Prestera switching logic is implemented in prestera_main.c, there is an intermediate hw layer between core logic and firmware. It is implemented in prestera_hw.c, the purpose of it is to encapsulate hw related logic, in future there is a plan to support more devices with different HW related configurations. This patch contains only basic switch initialization and RX/TX support over SDMA mechanism. Currently supported devices have DMA access range <= 32bit and require ZONE_DMA to be enabled, for such cases SDMA driver checks if the skb allocated in proper range supported by the Prestera device. Also meanwhile there is no TX interrupt support in current firmware version so recycling work is scheduled on each xmit. Port's mac address is generated from the switch base mac which may be provided via device-tree (static one or as nvme cell), or randomly generated. This is required by the firmware. Co-developed-by: Andrii Savka <andrii.savka@plvision.eu> Signed-off-by: Andrii Savka <andrii.savka@plvision.eu> Co-developed-by: Oleksandr Mazur <oleksandr.mazur@plvision.eu> Signed-off-by: Oleksandr Mazur <oleksandr.mazur@plvision.eu> Co-developed-by: Serhiy Boiko <serhiy.boiko@plvision.eu> Signed-off-by: Serhiy Boiko <serhiy.boiko@plvision.eu> Co-developed-by: Serhiy Pshyk <serhiy.pshyk@plvision.eu> Signed-off-by: Serhiy Pshyk <serhiy.pshyk@plvision.eu> Co-developed-by: Taras Chornyi <taras.chornyi@plvision.eu> Signed-off-by: Taras Chornyi <taras.chornyi@plvision.eu> Co-developed-by: Volodymyr Mytnyk <volodymyr.mytnyk@plvision.eu> Signed-off-by: Volodymyr Mytnyk <volodymyr.mytnyk@plvision.eu> Signed-off-by: Vadym Kochan <vadym.kochan@plvision.eu> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-17 00:30:57 +08:00
net: marvell: prestera: add firmware v4.0 support Add firmware (FW) version 4.0 support for Marvell Prestera driver. Major changes have been made to new v4.0 FW ABI to add support of new features, introduce the stability of the FW ABI and ensure better forward compatibility for the future driver vesrions. Current v4.0 FW feature set support does not expect any changes to ABI, as it was defined and tested through long period of time. The ABI may be extended in case of new features, but it will not break the backward compatibility. ABI major changes done in v4.0: - L1 ABI, where MAC and PHY API configuration are split. - ACL has been split to low-level TCAM and Counters ABI to provide more HW ACL capabilities for future driver versions. To support backward support, the addition compatibility layer is required in the driver which will have two different codebase under "if FW-VER elif FW-VER else" conditions that will be removed in the future anyway, So, the idea was to break backward support and focus on more stable FW instead of supporting old version with very minimal and limited set of features/capabilities. Improve FW msg validation: * Use __le64, __le32, __le16 types in msg to/from FW to catch endian mismatch by sparse. * Use BUILD_BUG_ON for structures sent/recv to/from FW. Co-developed-by: Vadym Kochan <vkochan@marvell.com> Signed-off-by: Vadym Kochan <vkochan@marvell.com> Signed-off-by: Yevhen Orlov <yevhen.orlov@plvision.eu> Signed-off-by: Taras Chornyi <tchornyi@marvell.com> Signed-off-by: Volodymyr Mytnyk <vmytnyk@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-29 13:38:07 +08:00
err = dev->send_req(dev, 0, cmd, clen, ret, rlen, waitms);
net: marvell: prestera: Add driver for Prestera family ASIC devices Marvell Prestera 98DX326x integrates up to 24 ports of 1GbE with 8 ports of 10GbE uplinks or 2 ports of 40Gbps stacking for a largely wireless SMB deployment. The current implementation supports only boards designed for the Marvell Switchdev solution and requires special firmware. The core Prestera switching logic is implemented in prestera_main.c, there is an intermediate hw layer between core logic and firmware. It is implemented in prestera_hw.c, the purpose of it is to encapsulate hw related logic, in future there is a plan to support more devices with different HW related configurations. This patch contains only basic switch initialization and RX/TX support over SDMA mechanism. Currently supported devices have DMA access range <= 32bit and require ZONE_DMA to be enabled, for such cases SDMA driver checks if the skb allocated in proper range supported by the Prestera device. Also meanwhile there is no TX interrupt support in current firmware version so recycling work is scheduled on each xmit. Port's mac address is generated from the switch base mac which may be provided via device-tree (static one or as nvme cell), or randomly generated. This is required by the firmware. Co-developed-by: Andrii Savka <andrii.savka@plvision.eu> Signed-off-by: Andrii Savka <andrii.savka@plvision.eu> Co-developed-by: Oleksandr Mazur <oleksandr.mazur@plvision.eu> Signed-off-by: Oleksandr Mazur <oleksandr.mazur@plvision.eu> Co-developed-by: Serhiy Boiko <serhiy.boiko@plvision.eu> Signed-off-by: Serhiy Boiko <serhiy.boiko@plvision.eu> Co-developed-by: Serhiy Pshyk <serhiy.pshyk@plvision.eu> Signed-off-by: Serhiy Pshyk <serhiy.pshyk@plvision.eu> Co-developed-by: Taras Chornyi <taras.chornyi@plvision.eu> Signed-off-by: Taras Chornyi <taras.chornyi@plvision.eu> Co-developed-by: Volodymyr Mytnyk <volodymyr.mytnyk@plvision.eu> Signed-off-by: Volodymyr Mytnyk <volodymyr.mytnyk@plvision.eu> Signed-off-by: Vadym Kochan <vadym.kochan@plvision.eu> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-17 00:30:57 +08:00
if (err)
return err;
if (ret->cmd.type != __cpu_to_le32(PRESTERA_CMD_TYPE_ACK))
net: marvell: prestera: Add driver for Prestera family ASIC devices Marvell Prestera 98DX326x integrates up to 24 ports of 1GbE with 8 ports of 10GbE uplinks or 2 ports of 40Gbps stacking for a largely wireless SMB deployment. The current implementation supports only boards designed for the Marvell Switchdev solution and requires special firmware. The core Prestera switching logic is implemented in prestera_main.c, there is an intermediate hw layer between core logic and firmware. It is implemented in prestera_hw.c, the purpose of it is to encapsulate hw related logic, in future there is a plan to support more devices with different HW related configurations. This patch contains only basic switch initialization and RX/TX support over SDMA mechanism. Currently supported devices have DMA access range <= 32bit and require ZONE_DMA to be enabled, for such cases SDMA driver checks if the skb allocated in proper range supported by the Prestera device. Also meanwhile there is no TX interrupt support in current firmware version so recycling work is scheduled on each xmit. Port's mac address is generated from the switch base mac which may be provided via device-tree (static one or as nvme cell), or randomly generated. This is required by the firmware. Co-developed-by: Andrii Savka <andrii.savka@plvision.eu> Signed-off-by: Andrii Savka <andrii.savka@plvision.eu> Co-developed-by: Oleksandr Mazur <oleksandr.mazur@plvision.eu> Signed-off-by: Oleksandr Mazur <oleksandr.mazur@plvision.eu> Co-developed-by: Serhiy Boiko <serhiy.boiko@plvision.eu> Signed-off-by: Serhiy Boiko <serhiy.boiko@plvision.eu> Co-developed-by: Serhiy Pshyk <serhiy.pshyk@plvision.eu> Signed-off-by: Serhiy Pshyk <serhiy.pshyk@plvision.eu> Co-developed-by: Taras Chornyi <taras.chornyi@plvision.eu> Signed-off-by: Taras Chornyi <taras.chornyi@plvision.eu> Co-developed-by: Volodymyr Mytnyk <volodymyr.mytnyk@plvision.eu> Signed-off-by: Volodymyr Mytnyk <volodymyr.mytnyk@plvision.eu> Signed-off-by: Vadym Kochan <vadym.kochan@plvision.eu> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-17 00:30:57 +08:00
return -EBADE;
if (ret->status != __cpu_to_le32(PRESTERA_CMD_ACK_OK))
net: marvell: prestera: Add driver for Prestera family ASIC devices Marvell Prestera 98DX326x integrates up to 24 ports of 1GbE with 8 ports of 10GbE uplinks or 2 ports of 40Gbps stacking for a largely wireless SMB deployment. The current implementation supports only boards designed for the Marvell Switchdev solution and requires special firmware. The core Prestera switching logic is implemented in prestera_main.c, there is an intermediate hw layer between core logic and firmware. It is implemented in prestera_hw.c, the purpose of it is to encapsulate hw related logic, in future there is a plan to support more devices with different HW related configurations. This patch contains only basic switch initialization and RX/TX support over SDMA mechanism. Currently supported devices have DMA access range <= 32bit and require ZONE_DMA to be enabled, for such cases SDMA driver checks if the skb allocated in proper range supported by the Prestera device. Also meanwhile there is no TX interrupt support in current firmware version so recycling work is scheduled on each xmit. Port's mac address is generated from the switch base mac which may be provided via device-tree (static one or as nvme cell), or randomly generated. This is required by the firmware. Co-developed-by: Andrii Savka <andrii.savka@plvision.eu> Signed-off-by: Andrii Savka <andrii.savka@plvision.eu> Co-developed-by: Oleksandr Mazur <oleksandr.mazur@plvision.eu> Signed-off-by: Oleksandr Mazur <oleksandr.mazur@plvision.eu> Co-developed-by: Serhiy Boiko <serhiy.boiko@plvision.eu> Signed-off-by: Serhiy Boiko <serhiy.boiko@plvision.eu> Co-developed-by: Serhiy Pshyk <serhiy.pshyk@plvision.eu> Signed-off-by: Serhiy Pshyk <serhiy.pshyk@plvision.eu> Co-developed-by: Taras Chornyi <taras.chornyi@plvision.eu> Signed-off-by: Taras Chornyi <taras.chornyi@plvision.eu> Co-developed-by: Volodymyr Mytnyk <volodymyr.mytnyk@plvision.eu> Signed-off-by: Volodymyr Mytnyk <volodymyr.mytnyk@plvision.eu> Signed-off-by: Vadym Kochan <vadym.kochan@plvision.eu> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-17 00:30:57 +08:00
return -EINVAL;
return 0;
}
static int prestera_cmd_ret(struct prestera_switch *sw,
enum prestera_cmd_type_t type,
struct prestera_msg_cmd *cmd, size_t clen,
struct prestera_msg_ret *ret, size_t rlen)
{
return __prestera_cmd_ret(sw, type, cmd, clen, ret, rlen, 0);
}
static int prestera_cmd_ret_wait(struct prestera_switch *sw,
enum prestera_cmd_type_t type,
struct prestera_msg_cmd *cmd, size_t clen,
struct prestera_msg_ret *ret, size_t rlen,
int waitms)
{
return __prestera_cmd_ret(sw, type, cmd, clen, ret, rlen, waitms);
}
static int prestera_cmd(struct prestera_switch *sw,
enum prestera_cmd_type_t type,
struct prestera_msg_cmd *cmd, size_t clen)
{
struct prestera_msg_common_resp resp;
return prestera_cmd_ret(sw, type, cmd, clen, &resp.ret, sizeof(resp));
}
static int prestera_fw_parse_port_evt(void *msg, struct prestera_event *evt)
{
net: marvell: prestera: add firmware v4.0 support Add firmware (FW) version 4.0 support for Marvell Prestera driver. Major changes have been made to new v4.0 FW ABI to add support of new features, introduce the stability of the FW ABI and ensure better forward compatibility for the future driver vesrions. Current v4.0 FW feature set support does not expect any changes to ABI, as it was defined and tested through long period of time. The ABI may be extended in case of new features, but it will not break the backward compatibility. ABI major changes done in v4.0: - L1 ABI, where MAC and PHY API configuration are split. - ACL has been split to low-level TCAM and Counters ABI to provide more HW ACL capabilities for future driver versions. To support backward support, the addition compatibility layer is required in the driver which will have two different codebase under "if FW-VER elif FW-VER else" conditions that will be removed in the future anyway, So, the idea was to break backward support and focus on more stable FW instead of supporting old version with very minimal and limited set of features/capabilities. Improve FW msg validation: * Use __le64, __le32, __le16 types in msg to/from FW to catch endian mismatch by sparse. * Use BUILD_BUG_ON for structures sent/recv to/from FW. Co-developed-by: Vadym Kochan <vkochan@marvell.com> Signed-off-by: Vadym Kochan <vkochan@marvell.com> Signed-off-by: Yevhen Orlov <yevhen.orlov@plvision.eu> Signed-off-by: Taras Chornyi <tchornyi@marvell.com> Signed-off-by: Volodymyr Mytnyk <vmytnyk@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-29 13:38:07 +08:00
struct prestera_msg_event_port *hw_evt;
net: marvell: prestera: Add driver for Prestera family ASIC devices Marvell Prestera 98DX326x integrates up to 24 ports of 1GbE with 8 ports of 10GbE uplinks or 2 ports of 40Gbps stacking for a largely wireless SMB deployment. The current implementation supports only boards designed for the Marvell Switchdev solution and requires special firmware. The core Prestera switching logic is implemented in prestera_main.c, there is an intermediate hw layer between core logic and firmware. It is implemented in prestera_hw.c, the purpose of it is to encapsulate hw related logic, in future there is a plan to support more devices with different HW related configurations. This patch contains only basic switch initialization and RX/TX support over SDMA mechanism. Currently supported devices have DMA access range <= 32bit and require ZONE_DMA to be enabled, for such cases SDMA driver checks if the skb allocated in proper range supported by the Prestera device. Also meanwhile there is no TX interrupt support in current firmware version so recycling work is scheduled on each xmit. Port's mac address is generated from the switch base mac which may be provided via device-tree (static one or as nvme cell), or randomly generated. This is required by the firmware. Co-developed-by: Andrii Savka <andrii.savka@plvision.eu> Signed-off-by: Andrii Savka <andrii.savka@plvision.eu> Co-developed-by: Oleksandr Mazur <oleksandr.mazur@plvision.eu> Signed-off-by: Oleksandr Mazur <oleksandr.mazur@plvision.eu> Co-developed-by: Serhiy Boiko <serhiy.boiko@plvision.eu> Signed-off-by: Serhiy Boiko <serhiy.boiko@plvision.eu> Co-developed-by: Serhiy Pshyk <serhiy.pshyk@plvision.eu> Signed-off-by: Serhiy Pshyk <serhiy.pshyk@plvision.eu> Co-developed-by: Taras Chornyi <taras.chornyi@plvision.eu> Signed-off-by: Taras Chornyi <taras.chornyi@plvision.eu> Co-developed-by: Volodymyr Mytnyk <volodymyr.mytnyk@plvision.eu> Signed-off-by: Volodymyr Mytnyk <volodymyr.mytnyk@plvision.eu> Signed-off-by: Vadym Kochan <vadym.kochan@plvision.eu> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-17 00:30:57 +08:00
net: marvell: prestera: add firmware v4.0 support Add firmware (FW) version 4.0 support for Marvell Prestera driver. Major changes have been made to new v4.0 FW ABI to add support of new features, introduce the stability of the FW ABI and ensure better forward compatibility for the future driver vesrions. Current v4.0 FW feature set support does not expect any changes to ABI, as it was defined and tested through long period of time. The ABI may be extended in case of new features, but it will not break the backward compatibility. ABI major changes done in v4.0: - L1 ABI, where MAC and PHY API configuration are split. - ACL has been split to low-level TCAM and Counters ABI to provide more HW ACL capabilities for future driver versions. To support backward support, the addition compatibility layer is required in the driver which will have two different codebase under "if FW-VER elif FW-VER else" conditions that will be removed in the future anyway, So, the idea was to break backward support and focus on more stable FW instead of supporting old version with very minimal and limited set of features/capabilities. Improve FW msg validation: * Use __le64, __le32, __le16 types in msg to/from FW to catch endian mismatch by sparse. * Use BUILD_BUG_ON for structures sent/recv to/from FW. Co-developed-by: Vadym Kochan <vkochan@marvell.com> Signed-off-by: Vadym Kochan <vkochan@marvell.com> Signed-off-by: Yevhen Orlov <yevhen.orlov@plvision.eu> Signed-off-by: Taras Chornyi <tchornyi@marvell.com> Signed-off-by: Volodymyr Mytnyk <vmytnyk@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-29 13:38:07 +08:00
hw_evt = (struct prestera_msg_event_port *)msg;
net: marvell: prestera: Add driver for Prestera family ASIC devices Marvell Prestera 98DX326x integrates up to 24 ports of 1GbE with 8 ports of 10GbE uplinks or 2 ports of 40Gbps stacking for a largely wireless SMB deployment. The current implementation supports only boards designed for the Marvell Switchdev solution and requires special firmware. The core Prestera switching logic is implemented in prestera_main.c, there is an intermediate hw layer between core logic and firmware. It is implemented in prestera_hw.c, the purpose of it is to encapsulate hw related logic, in future there is a plan to support more devices with different HW related configurations. This patch contains only basic switch initialization and RX/TX support over SDMA mechanism. Currently supported devices have DMA access range <= 32bit and require ZONE_DMA to be enabled, for such cases SDMA driver checks if the skb allocated in proper range supported by the Prestera device. Also meanwhile there is no TX interrupt support in current firmware version so recycling work is scheduled on each xmit. Port's mac address is generated from the switch base mac which may be provided via device-tree (static one or as nvme cell), or randomly generated. This is required by the firmware. Co-developed-by: Andrii Savka <andrii.savka@plvision.eu> Signed-off-by: Andrii Savka <andrii.savka@plvision.eu> Co-developed-by: Oleksandr Mazur <oleksandr.mazur@plvision.eu> Signed-off-by: Oleksandr Mazur <oleksandr.mazur@plvision.eu> Co-developed-by: Serhiy Boiko <serhiy.boiko@plvision.eu> Signed-off-by: Serhiy Boiko <serhiy.boiko@plvision.eu> Co-developed-by: Serhiy Pshyk <serhiy.pshyk@plvision.eu> Signed-off-by: Serhiy Pshyk <serhiy.pshyk@plvision.eu> Co-developed-by: Taras Chornyi <taras.chornyi@plvision.eu> Signed-off-by: Taras Chornyi <taras.chornyi@plvision.eu> Co-developed-by: Volodymyr Mytnyk <volodymyr.mytnyk@plvision.eu> Signed-off-by: Volodymyr Mytnyk <volodymyr.mytnyk@plvision.eu> Signed-off-by: Vadym Kochan <vadym.kochan@plvision.eu> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-17 00:30:57 +08:00
net: marvell: prestera: add firmware v4.0 support Add firmware (FW) version 4.0 support for Marvell Prestera driver. Major changes have been made to new v4.0 FW ABI to add support of new features, introduce the stability of the FW ABI and ensure better forward compatibility for the future driver vesrions. Current v4.0 FW feature set support does not expect any changes to ABI, as it was defined and tested through long period of time. The ABI may be extended in case of new features, but it will not break the backward compatibility. ABI major changes done in v4.0: - L1 ABI, where MAC and PHY API configuration are split. - ACL has been split to low-level TCAM and Counters ABI to provide more HW ACL capabilities for future driver versions. To support backward support, the addition compatibility layer is required in the driver which will have two different codebase under "if FW-VER elif FW-VER else" conditions that will be removed in the future anyway, So, the idea was to break backward support and focus on more stable FW instead of supporting old version with very minimal and limited set of features/capabilities. Improve FW msg validation: * Use __le64, __le32, __le16 types in msg to/from FW to catch endian mismatch by sparse. * Use BUILD_BUG_ON for structures sent/recv to/from FW. Co-developed-by: Vadym Kochan <vkochan@marvell.com> Signed-off-by: Vadym Kochan <vkochan@marvell.com> Signed-off-by: Yevhen Orlov <yevhen.orlov@plvision.eu> Signed-off-by: Taras Chornyi <tchornyi@marvell.com> Signed-off-by: Volodymyr Mytnyk <vmytnyk@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-29 13:38:07 +08:00
evt->port_evt.port_id = __le32_to_cpu(hw_evt->port_id);
if (evt->id == PRESTERA_PORT_EVENT_MAC_STATE_CHANGED) {
evt->port_evt.data.mac.oper = hw_evt->param.mac.oper;
evt->port_evt.data.mac.mode =
__le32_to_cpu(hw_evt->param.mac.mode);
evt->port_evt.data.mac.speed =
__le32_to_cpu(hw_evt->param.mac.speed);
evt->port_evt.data.mac.duplex = hw_evt->param.mac.duplex;
evt->port_evt.data.mac.fc = hw_evt->param.mac.fc;
evt->port_evt.data.mac.fec = hw_evt->param.mac.fec;
} else {
return -EINVAL;
}
net: marvell: prestera: Add driver for Prestera family ASIC devices Marvell Prestera 98DX326x integrates up to 24 ports of 1GbE with 8 ports of 10GbE uplinks or 2 ports of 40Gbps stacking for a largely wireless SMB deployment. The current implementation supports only boards designed for the Marvell Switchdev solution and requires special firmware. The core Prestera switching logic is implemented in prestera_main.c, there is an intermediate hw layer between core logic and firmware. It is implemented in prestera_hw.c, the purpose of it is to encapsulate hw related logic, in future there is a plan to support more devices with different HW related configurations. This patch contains only basic switch initialization and RX/TX support over SDMA mechanism. Currently supported devices have DMA access range <= 32bit and require ZONE_DMA to be enabled, for such cases SDMA driver checks if the skb allocated in proper range supported by the Prestera device. Also meanwhile there is no TX interrupt support in current firmware version so recycling work is scheduled on each xmit. Port's mac address is generated from the switch base mac which may be provided via device-tree (static one or as nvme cell), or randomly generated. This is required by the firmware. Co-developed-by: Andrii Savka <andrii.savka@plvision.eu> Signed-off-by: Andrii Savka <andrii.savka@plvision.eu> Co-developed-by: Oleksandr Mazur <oleksandr.mazur@plvision.eu> Signed-off-by: Oleksandr Mazur <oleksandr.mazur@plvision.eu> Co-developed-by: Serhiy Boiko <serhiy.boiko@plvision.eu> Signed-off-by: Serhiy Boiko <serhiy.boiko@plvision.eu> Co-developed-by: Serhiy Pshyk <serhiy.pshyk@plvision.eu> Signed-off-by: Serhiy Pshyk <serhiy.pshyk@plvision.eu> Co-developed-by: Taras Chornyi <taras.chornyi@plvision.eu> Signed-off-by: Taras Chornyi <taras.chornyi@plvision.eu> Co-developed-by: Volodymyr Mytnyk <volodymyr.mytnyk@plvision.eu> Signed-off-by: Volodymyr Mytnyk <volodymyr.mytnyk@plvision.eu> Signed-off-by: Vadym Kochan <vadym.kochan@plvision.eu> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-17 00:30:57 +08:00
return 0;
}
static int prestera_fw_parse_fdb_evt(void *msg, struct prestera_event *evt)
{
struct prestera_msg_event_fdb *hw_evt = msg;
switch (hw_evt->dest_type) {
case PRESTERA_HW_FDB_ENTRY_TYPE_REG_PORT:
evt->fdb_evt.type = PRESTERA_FDB_ENTRY_TYPE_REG_PORT;
net: marvell: prestera: add firmware v4.0 support Add firmware (FW) version 4.0 support for Marvell Prestera driver. Major changes have been made to new v4.0 FW ABI to add support of new features, introduce the stability of the FW ABI and ensure better forward compatibility for the future driver vesrions. Current v4.0 FW feature set support does not expect any changes to ABI, as it was defined and tested through long period of time. The ABI may be extended in case of new features, but it will not break the backward compatibility. ABI major changes done in v4.0: - L1 ABI, where MAC and PHY API configuration are split. - ACL has been split to low-level TCAM and Counters ABI to provide more HW ACL capabilities for future driver versions. To support backward support, the addition compatibility layer is required in the driver which will have two different codebase under "if FW-VER elif FW-VER else" conditions that will be removed in the future anyway, So, the idea was to break backward support and focus on more stable FW instead of supporting old version with very minimal and limited set of features/capabilities. Improve FW msg validation: * Use __le64, __le32, __le16 types in msg to/from FW to catch endian mismatch by sparse. * Use BUILD_BUG_ON for structures sent/recv to/from FW. Co-developed-by: Vadym Kochan <vkochan@marvell.com> Signed-off-by: Vadym Kochan <vkochan@marvell.com> Signed-off-by: Yevhen Orlov <yevhen.orlov@plvision.eu> Signed-off-by: Taras Chornyi <tchornyi@marvell.com> Signed-off-by: Volodymyr Mytnyk <vmytnyk@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-29 13:38:07 +08:00
evt->fdb_evt.dest.port_id = __le32_to_cpu(hw_evt->dest.port_id);
break;
case PRESTERA_HW_FDB_ENTRY_TYPE_LAG:
evt->fdb_evt.type = PRESTERA_FDB_ENTRY_TYPE_LAG;
net: marvell: prestera: add firmware v4.0 support Add firmware (FW) version 4.0 support for Marvell Prestera driver. Major changes have been made to new v4.0 FW ABI to add support of new features, introduce the stability of the FW ABI and ensure better forward compatibility for the future driver vesrions. Current v4.0 FW feature set support does not expect any changes to ABI, as it was defined and tested through long period of time. The ABI may be extended in case of new features, but it will not break the backward compatibility. ABI major changes done in v4.0: - L1 ABI, where MAC and PHY API configuration are split. - ACL has been split to low-level TCAM and Counters ABI to provide more HW ACL capabilities for future driver versions. To support backward support, the addition compatibility layer is required in the driver which will have two different codebase under "if FW-VER elif FW-VER else" conditions that will be removed in the future anyway, So, the idea was to break backward support and focus on more stable FW instead of supporting old version with very minimal and limited set of features/capabilities. Improve FW msg validation: * Use __le64, __le32, __le16 types in msg to/from FW to catch endian mismatch by sparse. * Use BUILD_BUG_ON for structures sent/recv to/from FW. Co-developed-by: Vadym Kochan <vkochan@marvell.com> Signed-off-by: Vadym Kochan <vkochan@marvell.com> Signed-off-by: Yevhen Orlov <yevhen.orlov@plvision.eu> Signed-off-by: Taras Chornyi <tchornyi@marvell.com> Signed-off-by: Volodymyr Mytnyk <vmytnyk@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-29 13:38:07 +08:00
evt->fdb_evt.dest.lag_id = __le16_to_cpu(hw_evt->dest.lag_id);
break;
default:
return -EINVAL;
}
net: marvell: prestera: add firmware v4.0 support Add firmware (FW) version 4.0 support for Marvell Prestera driver. Major changes have been made to new v4.0 FW ABI to add support of new features, introduce the stability of the FW ABI and ensure better forward compatibility for the future driver vesrions. Current v4.0 FW feature set support does not expect any changes to ABI, as it was defined and tested through long period of time. The ABI may be extended in case of new features, but it will not break the backward compatibility. ABI major changes done in v4.0: - L1 ABI, where MAC and PHY API configuration are split. - ACL has been split to low-level TCAM and Counters ABI to provide more HW ACL capabilities for future driver versions. To support backward support, the addition compatibility layer is required in the driver which will have two different codebase under "if FW-VER elif FW-VER else" conditions that will be removed in the future anyway, So, the idea was to break backward support and focus on more stable FW instead of supporting old version with very minimal and limited set of features/capabilities. Improve FW msg validation: * Use __le64, __le32, __le16 types in msg to/from FW to catch endian mismatch by sparse. * Use BUILD_BUG_ON for structures sent/recv to/from FW. Co-developed-by: Vadym Kochan <vkochan@marvell.com> Signed-off-by: Vadym Kochan <vkochan@marvell.com> Signed-off-by: Yevhen Orlov <yevhen.orlov@plvision.eu> Signed-off-by: Taras Chornyi <tchornyi@marvell.com> Signed-off-by: Volodymyr Mytnyk <vmytnyk@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-29 13:38:07 +08:00
evt->fdb_evt.vid = __le32_to_cpu(hw_evt->vid);
ether_addr_copy(evt->fdb_evt.data.mac, hw_evt->param.mac);
return 0;
}
net: marvell: prestera: Add driver for Prestera family ASIC devices Marvell Prestera 98DX326x integrates up to 24 ports of 1GbE with 8 ports of 10GbE uplinks or 2 ports of 40Gbps stacking for a largely wireless SMB deployment. The current implementation supports only boards designed for the Marvell Switchdev solution and requires special firmware. The core Prestera switching logic is implemented in prestera_main.c, there is an intermediate hw layer between core logic and firmware. It is implemented in prestera_hw.c, the purpose of it is to encapsulate hw related logic, in future there is a plan to support more devices with different HW related configurations. This patch contains only basic switch initialization and RX/TX support over SDMA mechanism. Currently supported devices have DMA access range <= 32bit and require ZONE_DMA to be enabled, for such cases SDMA driver checks if the skb allocated in proper range supported by the Prestera device. Also meanwhile there is no TX interrupt support in current firmware version so recycling work is scheduled on each xmit. Port's mac address is generated from the switch base mac which may be provided via device-tree (static one or as nvme cell), or randomly generated. This is required by the firmware. Co-developed-by: Andrii Savka <andrii.savka@plvision.eu> Signed-off-by: Andrii Savka <andrii.savka@plvision.eu> Co-developed-by: Oleksandr Mazur <oleksandr.mazur@plvision.eu> Signed-off-by: Oleksandr Mazur <oleksandr.mazur@plvision.eu> Co-developed-by: Serhiy Boiko <serhiy.boiko@plvision.eu> Signed-off-by: Serhiy Boiko <serhiy.boiko@plvision.eu> Co-developed-by: Serhiy Pshyk <serhiy.pshyk@plvision.eu> Signed-off-by: Serhiy Pshyk <serhiy.pshyk@plvision.eu> Co-developed-by: Taras Chornyi <taras.chornyi@plvision.eu> Signed-off-by: Taras Chornyi <taras.chornyi@plvision.eu> Co-developed-by: Volodymyr Mytnyk <volodymyr.mytnyk@plvision.eu> Signed-off-by: Volodymyr Mytnyk <volodymyr.mytnyk@plvision.eu> Signed-off-by: Vadym Kochan <vadym.kochan@plvision.eu> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-17 00:30:57 +08:00
static struct prestera_fw_evt_parser {
int (*func)(void *msg, struct prestera_event *evt);
} fw_event_parsers[PRESTERA_EVENT_TYPE_MAX] = {
[PRESTERA_EVENT_TYPE_PORT] = { .func = prestera_fw_parse_port_evt },
[PRESTERA_EVENT_TYPE_FDB] = { .func = prestera_fw_parse_fdb_evt },
net: marvell: prestera: Add driver for Prestera family ASIC devices Marvell Prestera 98DX326x integrates up to 24 ports of 1GbE with 8 ports of 10GbE uplinks or 2 ports of 40Gbps stacking for a largely wireless SMB deployment. The current implementation supports only boards designed for the Marvell Switchdev solution and requires special firmware. The core Prestera switching logic is implemented in prestera_main.c, there is an intermediate hw layer between core logic and firmware. It is implemented in prestera_hw.c, the purpose of it is to encapsulate hw related logic, in future there is a plan to support more devices with different HW related configurations. This patch contains only basic switch initialization and RX/TX support over SDMA mechanism. Currently supported devices have DMA access range <= 32bit and require ZONE_DMA to be enabled, for such cases SDMA driver checks if the skb allocated in proper range supported by the Prestera device. Also meanwhile there is no TX interrupt support in current firmware version so recycling work is scheduled on each xmit. Port's mac address is generated from the switch base mac which may be provided via device-tree (static one or as nvme cell), or randomly generated. This is required by the firmware. Co-developed-by: Andrii Savka <andrii.savka@plvision.eu> Signed-off-by: Andrii Savka <andrii.savka@plvision.eu> Co-developed-by: Oleksandr Mazur <oleksandr.mazur@plvision.eu> Signed-off-by: Oleksandr Mazur <oleksandr.mazur@plvision.eu> Co-developed-by: Serhiy Boiko <serhiy.boiko@plvision.eu> Signed-off-by: Serhiy Boiko <serhiy.boiko@plvision.eu> Co-developed-by: Serhiy Pshyk <serhiy.pshyk@plvision.eu> Signed-off-by: Serhiy Pshyk <serhiy.pshyk@plvision.eu> Co-developed-by: Taras Chornyi <taras.chornyi@plvision.eu> Signed-off-by: Taras Chornyi <taras.chornyi@plvision.eu> Co-developed-by: Volodymyr Mytnyk <volodymyr.mytnyk@plvision.eu> Signed-off-by: Volodymyr Mytnyk <volodymyr.mytnyk@plvision.eu> Signed-off-by: Vadym Kochan <vadym.kochan@plvision.eu> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-17 00:30:57 +08:00
};
static struct prestera_fw_event_handler *
__find_event_handler(const struct prestera_switch *sw,
enum prestera_event_type type)
{
struct prestera_fw_event_handler *eh;
list_for_each_entry_rcu(eh, &sw->event_handlers, list) {
if (eh->type == type)
return eh;
}
return NULL;
}
static int prestera_find_event_handler(const struct prestera_switch *sw,
enum prestera_event_type type,
struct prestera_fw_event_handler *eh)
{
struct prestera_fw_event_handler *tmp;
int err = 0;
rcu_read_lock();
tmp = __find_event_handler(sw, type);
if (tmp)
*eh = *tmp;
else
err = -ENOENT;
rcu_read_unlock();
return err;
}
static int prestera_evt_recv(struct prestera_device *dev, void *buf, size_t size)
{
struct prestera_switch *sw = dev->priv;
struct prestera_msg_event *msg = buf;
struct prestera_fw_event_handler eh;
struct prestera_event evt;
net: marvell: prestera: add firmware v4.0 support Add firmware (FW) version 4.0 support for Marvell Prestera driver. Major changes have been made to new v4.0 FW ABI to add support of new features, introduce the stability of the FW ABI and ensure better forward compatibility for the future driver vesrions. Current v4.0 FW feature set support does not expect any changes to ABI, as it was defined and tested through long period of time. The ABI may be extended in case of new features, but it will not break the backward compatibility. ABI major changes done in v4.0: - L1 ABI, where MAC and PHY API configuration are split. - ACL has been split to low-level TCAM and Counters ABI to provide more HW ACL capabilities for future driver versions. To support backward support, the addition compatibility layer is required in the driver which will have two different codebase under "if FW-VER elif FW-VER else" conditions that will be removed in the future anyway, So, the idea was to break backward support and focus on more stable FW instead of supporting old version with very minimal and limited set of features/capabilities. Improve FW msg validation: * Use __le64, __le32, __le16 types in msg to/from FW to catch endian mismatch by sparse. * Use BUILD_BUG_ON for structures sent/recv to/from FW. Co-developed-by: Vadym Kochan <vkochan@marvell.com> Signed-off-by: Vadym Kochan <vkochan@marvell.com> Signed-off-by: Yevhen Orlov <yevhen.orlov@plvision.eu> Signed-off-by: Taras Chornyi <tchornyi@marvell.com> Signed-off-by: Volodymyr Mytnyk <vmytnyk@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-29 13:38:07 +08:00
u16 msg_type;
net: marvell: prestera: Add driver for Prestera family ASIC devices Marvell Prestera 98DX326x integrates up to 24 ports of 1GbE with 8 ports of 10GbE uplinks or 2 ports of 40Gbps stacking for a largely wireless SMB deployment. The current implementation supports only boards designed for the Marvell Switchdev solution and requires special firmware. The core Prestera switching logic is implemented in prestera_main.c, there is an intermediate hw layer between core logic and firmware. It is implemented in prestera_hw.c, the purpose of it is to encapsulate hw related logic, in future there is a plan to support more devices with different HW related configurations. This patch contains only basic switch initialization and RX/TX support over SDMA mechanism. Currently supported devices have DMA access range <= 32bit and require ZONE_DMA to be enabled, for such cases SDMA driver checks if the skb allocated in proper range supported by the Prestera device. Also meanwhile there is no TX interrupt support in current firmware version so recycling work is scheduled on each xmit. Port's mac address is generated from the switch base mac which may be provided via device-tree (static one or as nvme cell), or randomly generated. This is required by the firmware. Co-developed-by: Andrii Savka <andrii.savka@plvision.eu> Signed-off-by: Andrii Savka <andrii.savka@plvision.eu> Co-developed-by: Oleksandr Mazur <oleksandr.mazur@plvision.eu> Signed-off-by: Oleksandr Mazur <oleksandr.mazur@plvision.eu> Co-developed-by: Serhiy Boiko <serhiy.boiko@plvision.eu> Signed-off-by: Serhiy Boiko <serhiy.boiko@plvision.eu> Co-developed-by: Serhiy Pshyk <serhiy.pshyk@plvision.eu> Signed-off-by: Serhiy Pshyk <serhiy.pshyk@plvision.eu> Co-developed-by: Taras Chornyi <taras.chornyi@plvision.eu> Signed-off-by: Taras Chornyi <taras.chornyi@plvision.eu> Co-developed-by: Volodymyr Mytnyk <volodymyr.mytnyk@plvision.eu> Signed-off-by: Volodymyr Mytnyk <volodymyr.mytnyk@plvision.eu> Signed-off-by: Vadym Kochan <vadym.kochan@plvision.eu> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-17 00:30:57 +08:00
int err;
net: marvell: prestera: add firmware v4.0 support Add firmware (FW) version 4.0 support for Marvell Prestera driver. Major changes have been made to new v4.0 FW ABI to add support of new features, introduce the stability of the FW ABI and ensure better forward compatibility for the future driver vesrions. Current v4.0 FW feature set support does not expect any changes to ABI, as it was defined and tested through long period of time. The ABI may be extended in case of new features, but it will not break the backward compatibility. ABI major changes done in v4.0: - L1 ABI, where MAC and PHY API configuration are split. - ACL has been split to low-level TCAM and Counters ABI to provide more HW ACL capabilities for future driver versions. To support backward support, the addition compatibility layer is required in the driver which will have two different codebase under "if FW-VER elif FW-VER else" conditions that will be removed in the future anyway, So, the idea was to break backward support and focus on more stable FW instead of supporting old version with very minimal and limited set of features/capabilities. Improve FW msg validation: * Use __le64, __le32, __le16 types in msg to/from FW to catch endian mismatch by sparse. * Use BUILD_BUG_ON for structures sent/recv to/from FW. Co-developed-by: Vadym Kochan <vkochan@marvell.com> Signed-off-by: Vadym Kochan <vkochan@marvell.com> Signed-off-by: Yevhen Orlov <yevhen.orlov@plvision.eu> Signed-off-by: Taras Chornyi <tchornyi@marvell.com> Signed-off-by: Volodymyr Mytnyk <vmytnyk@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-29 13:38:07 +08:00
msg_type = __le16_to_cpu(msg->type);
if (msg_type >= PRESTERA_EVENT_TYPE_MAX)
net: marvell: prestera: Add driver for Prestera family ASIC devices Marvell Prestera 98DX326x integrates up to 24 ports of 1GbE with 8 ports of 10GbE uplinks or 2 ports of 40Gbps stacking for a largely wireless SMB deployment. The current implementation supports only boards designed for the Marvell Switchdev solution and requires special firmware. The core Prestera switching logic is implemented in prestera_main.c, there is an intermediate hw layer between core logic and firmware. It is implemented in prestera_hw.c, the purpose of it is to encapsulate hw related logic, in future there is a plan to support more devices with different HW related configurations. This patch contains only basic switch initialization and RX/TX support over SDMA mechanism. Currently supported devices have DMA access range <= 32bit and require ZONE_DMA to be enabled, for such cases SDMA driver checks if the skb allocated in proper range supported by the Prestera device. Also meanwhile there is no TX interrupt support in current firmware version so recycling work is scheduled on each xmit. Port's mac address is generated from the switch base mac which may be provided via device-tree (static one or as nvme cell), or randomly generated. This is required by the firmware. Co-developed-by: Andrii Savka <andrii.savka@plvision.eu> Signed-off-by: Andrii Savka <andrii.savka@plvision.eu> Co-developed-by: Oleksandr Mazur <oleksandr.mazur@plvision.eu> Signed-off-by: Oleksandr Mazur <oleksandr.mazur@plvision.eu> Co-developed-by: Serhiy Boiko <serhiy.boiko@plvision.eu> Signed-off-by: Serhiy Boiko <serhiy.boiko@plvision.eu> Co-developed-by: Serhiy Pshyk <serhiy.pshyk@plvision.eu> Signed-off-by: Serhiy Pshyk <serhiy.pshyk@plvision.eu> Co-developed-by: Taras Chornyi <taras.chornyi@plvision.eu> Signed-off-by: Taras Chornyi <taras.chornyi@plvision.eu> Co-developed-by: Volodymyr Mytnyk <volodymyr.mytnyk@plvision.eu> Signed-off-by: Volodymyr Mytnyk <volodymyr.mytnyk@plvision.eu> Signed-off-by: Vadym Kochan <vadym.kochan@plvision.eu> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-17 00:30:57 +08:00
return -EINVAL;
net: marvell: prestera: add firmware v4.0 support Add firmware (FW) version 4.0 support for Marvell Prestera driver. Major changes have been made to new v4.0 FW ABI to add support of new features, introduce the stability of the FW ABI and ensure better forward compatibility for the future driver vesrions. Current v4.0 FW feature set support does not expect any changes to ABI, as it was defined and tested through long period of time. The ABI may be extended in case of new features, but it will not break the backward compatibility. ABI major changes done in v4.0: - L1 ABI, where MAC and PHY API configuration are split. - ACL has been split to low-level TCAM and Counters ABI to provide more HW ACL capabilities for future driver versions. To support backward support, the addition compatibility layer is required in the driver which will have two different codebase under "if FW-VER elif FW-VER else" conditions that will be removed in the future anyway, So, the idea was to break backward support and focus on more stable FW instead of supporting old version with very minimal and limited set of features/capabilities. Improve FW msg validation: * Use __le64, __le32, __le16 types in msg to/from FW to catch endian mismatch by sparse. * Use BUILD_BUG_ON for structures sent/recv to/from FW. Co-developed-by: Vadym Kochan <vkochan@marvell.com> Signed-off-by: Vadym Kochan <vkochan@marvell.com> Signed-off-by: Yevhen Orlov <yevhen.orlov@plvision.eu> Signed-off-by: Taras Chornyi <tchornyi@marvell.com> Signed-off-by: Volodymyr Mytnyk <vmytnyk@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-29 13:38:07 +08:00
if (!fw_event_parsers[msg_type].func)
net: marvell: prestera: Add driver for Prestera family ASIC devices Marvell Prestera 98DX326x integrates up to 24 ports of 1GbE with 8 ports of 10GbE uplinks or 2 ports of 40Gbps stacking for a largely wireless SMB deployment. The current implementation supports only boards designed for the Marvell Switchdev solution and requires special firmware. The core Prestera switching logic is implemented in prestera_main.c, there is an intermediate hw layer between core logic and firmware. It is implemented in prestera_hw.c, the purpose of it is to encapsulate hw related logic, in future there is a plan to support more devices with different HW related configurations. This patch contains only basic switch initialization and RX/TX support over SDMA mechanism. Currently supported devices have DMA access range <= 32bit and require ZONE_DMA to be enabled, for such cases SDMA driver checks if the skb allocated in proper range supported by the Prestera device. Also meanwhile there is no TX interrupt support in current firmware version so recycling work is scheduled on each xmit. Port's mac address is generated from the switch base mac which may be provided via device-tree (static one or as nvme cell), or randomly generated. This is required by the firmware. Co-developed-by: Andrii Savka <andrii.savka@plvision.eu> Signed-off-by: Andrii Savka <andrii.savka@plvision.eu> Co-developed-by: Oleksandr Mazur <oleksandr.mazur@plvision.eu> Signed-off-by: Oleksandr Mazur <oleksandr.mazur@plvision.eu> Co-developed-by: Serhiy Boiko <serhiy.boiko@plvision.eu> Signed-off-by: Serhiy Boiko <serhiy.boiko@plvision.eu> Co-developed-by: Serhiy Pshyk <serhiy.pshyk@plvision.eu> Signed-off-by: Serhiy Pshyk <serhiy.pshyk@plvision.eu> Co-developed-by: Taras Chornyi <taras.chornyi@plvision.eu> Signed-off-by: Taras Chornyi <taras.chornyi@plvision.eu> Co-developed-by: Volodymyr Mytnyk <volodymyr.mytnyk@plvision.eu> Signed-off-by: Volodymyr Mytnyk <volodymyr.mytnyk@plvision.eu> Signed-off-by: Vadym Kochan <vadym.kochan@plvision.eu> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-17 00:30:57 +08:00
return -ENOENT;
net: marvell: prestera: add firmware v4.0 support Add firmware (FW) version 4.0 support for Marvell Prestera driver. Major changes have been made to new v4.0 FW ABI to add support of new features, introduce the stability of the FW ABI and ensure better forward compatibility for the future driver vesrions. Current v4.0 FW feature set support does not expect any changes to ABI, as it was defined and tested through long period of time. The ABI may be extended in case of new features, but it will not break the backward compatibility. ABI major changes done in v4.0: - L1 ABI, where MAC and PHY API configuration are split. - ACL has been split to low-level TCAM and Counters ABI to provide more HW ACL capabilities for future driver versions. To support backward support, the addition compatibility layer is required in the driver which will have two different codebase under "if FW-VER elif FW-VER else" conditions that will be removed in the future anyway, So, the idea was to break backward support and focus on more stable FW instead of supporting old version with very minimal and limited set of features/capabilities. Improve FW msg validation: * Use __le64, __le32, __le16 types in msg to/from FW to catch endian mismatch by sparse. * Use BUILD_BUG_ON for structures sent/recv to/from FW. Co-developed-by: Vadym Kochan <vkochan@marvell.com> Signed-off-by: Vadym Kochan <vkochan@marvell.com> Signed-off-by: Yevhen Orlov <yevhen.orlov@plvision.eu> Signed-off-by: Taras Chornyi <tchornyi@marvell.com> Signed-off-by: Volodymyr Mytnyk <vmytnyk@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-29 13:38:07 +08:00
err = prestera_find_event_handler(sw, msg_type, &eh);
net: marvell: prestera: Add driver for Prestera family ASIC devices Marvell Prestera 98DX326x integrates up to 24 ports of 1GbE with 8 ports of 10GbE uplinks or 2 ports of 40Gbps stacking for a largely wireless SMB deployment. The current implementation supports only boards designed for the Marvell Switchdev solution and requires special firmware. The core Prestera switching logic is implemented in prestera_main.c, there is an intermediate hw layer between core logic and firmware. It is implemented in prestera_hw.c, the purpose of it is to encapsulate hw related logic, in future there is a plan to support more devices with different HW related configurations. This patch contains only basic switch initialization and RX/TX support over SDMA mechanism. Currently supported devices have DMA access range <= 32bit and require ZONE_DMA to be enabled, for such cases SDMA driver checks if the skb allocated in proper range supported by the Prestera device. Also meanwhile there is no TX interrupt support in current firmware version so recycling work is scheduled on each xmit. Port's mac address is generated from the switch base mac which may be provided via device-tree (static one or as nvme cell), or randomly generated. This is required by the firmware. Co-developed-by: Andrii Savka <andrii.savka@plvision.eu> Signed-off-by: Andrii Savka <andrii.savka@plvision.eu> Co-developed-by: Oleksandr Mazur <oleksandr.mazur@plvision.eu> Signed-off-by: Oleksandr Mazur <oleksandr.mazur@plvision.eu> Co-developed-by: Serhiy Boiko <serhiy.boiko@plvision.eu> Signed-off-by: Serhiy Boiko <serhiy.boiko@plvision.eu> Co-developed-by: Serhiy Pshyk <serhiy.pshyk@plvision.eu> Signed-off-by: Serhiy Pshyk <serhiy.pshyk@plvision.eu> Co-developed-by: Taras Chornyi <taras.chornyi@plvision.eu> Signed-off-by: Taras Chornyi <taras.chornyi@plvision.eu> Co-developed-by: Volodymyr Mytnyk <volodymyr.mytnyk@plvision.eu> Signed-off-by: Volodymyr Mytnyk <volodymyr.mytnyk@plvision.eu> Signed-off-by: Vadym Kochan <vadym.kochan@plvision.eu> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-17 00:30:57 +08:00
if (err)
return err;
net: marvell: prestera: add firmware v4.0 support Add firmware (FW) version 4.0 support for Marvell Prestera driver. Major changes have been made to new v4.0 FW ABI to add support of new features, introduce the stability of the FW ABI and ensure better forward compatibility for the future driver vesrions. Current v4.0 FW feature set support does not expect any changes to ABI, as it was defined and tested through long period of time. The ABI may be extended in case of new features, but it will not break the backward compatibility. ABI major changes done in v4.0: - L1 ABI, where MAC and PHY API configuration are split. - ACL has been split to low-level TCAM and Counters ABI to provide more HW ACL capabilities for future driver versions. To support backward support, the addition compatibility layer is required in the driver which will have two different codebase under "if FW-VER elif FW-VER else" conditions that will be removed in the future anyway, So, the idea was to break backward support and focus on more stable FW instead of supporting old version with very minimal and limited set of features/capabilities. Improve FW msg validation: * Use __le64, __le32, __le16 types in msg to/from FW to catch endian mismatch by sparse. * Use BUILD_BUG_ON for structures sent/recv to/from FW. Co-developed-by: Vadym Kochan <vkochan@marvell.com> Signed-off-by: Vadym Kochan <vkochan@marvell.com> Signed-off-by: Yevhen Orlov <yevhen.orlov@plvision.eu> Signed-off-by: Taras Chornyi <tchornyi@marvell.com> Signed-off-by: Volodymyr Mytnyk <vmytnyk@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-29 13:38:07 +08:00
evt.id = __le16_to_cpu(msg->id);
net: marvell: prestera: Add driver for Prestera family ASIC devices Marvell Prestera 98DX326x integrates up to 24 ports of 1GbE with 8 ports of 10GbE uplinks or 2 ports of 40Gbps stacking for a largely wireless SMB deployment. The current implementation supports only boards designed for the Marvell Switchdev solution and requires special firmware. The core Prestera switching logic is implemented in prestera_main.c, there is an intermediate hw layer between core logic and firmware. It is implemented in prestera_hw.c, the purpose of it is to encapsulate hw related logic, in future there is a plan to support more devices with different HW related configurations. This patch contains only basic switch initialization and RX/TX support over SDMA mechanism. Currently supported devices have DMA access range <= 32bit and require ZONE_DMA to be enabled, for such cases SDMA driver checks if the skb allocated in proper range supported by the Prestera device. Also meanwhile there is no TX interrupt support in current firmware version so recycling work is scheduled on each xmit. Port's mac address is generated from the switch base mac which may be provided via device-tree (static one or as nvme cell), or randomly generated. This is required by the firmware. Co-developed-by: Andrii Savka <andrii.savka@plvision.eu> Signed-off-by: Andrii Savka <andrii.savka@plvision.eu> Co-developed-by: Oleksandr Mazur <oleksandr.mazur@plvision.eu> Signed-off-by: Oleksandr Mazur <oleksandr.mazur@plvision.eu> Co-developed-by: Serhiy Boiko <serhiy.boiko@plvision.eu> Signed-off-by: Serhiy Boiko <serhiy.boiko@plvision.eu> Co-developed-by: Serhiy Pshyk <serhiy.pshyk@plvision.eu> Signed-off-by: Serhiy Pshyk <serhiy.pshyk@plvision.eu> Co-developed-by: Taras Chornyi <taras.chornyi@plvision.eu> Signed-off-by: Taras Chornyi <taras.chornyi@plvision.eu> Co-developed-by: Volodymyr Mytnyk <volodymyr.mytnyk@plvision.eu> Signed-off-by: Volodymyr Mytnyk <volodymyr.mytnyk@plvision.eu> Signed-off-by: Vadym Kochan <vadym.kochan@plvision.eu> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-17 00:30:57 +08:00
net: marvell: prestera: add firmware v4.0 support Add firmware (FW) version 4.0 support for Marvell Prestera driver. Major changes have been made to new v4.0 FW ABI to add support of new features, introduce the stability of the FW ABI and ensure better forward compatibility for the future driver vesrions. Current v4.0 FW feature set support does not expect any changes to ABI, as it was defined and tested through long period of time. The ABI may be extended in case of new features, but it will not break the backward compatibility. ABI major changes done in v4.0: - L1 ABI, where MAC and PHY API configuration are split. - ACL has been split to low-level TCAM and Counters ABI to provide more HW ACL capabilities for future driver versions. To support backward support, the addition compatibility layer is required in the driver which will have two different codebase under "if FW-VER elif FW-VER else" conditions that will be removed in the future anyway, So, the idea was to break backward support and focus on more stable FW instead of supporting old version with very minimal and limited set of features/capabilities. Improve FW msg validation: * Use __le64, __le32, __le16 types in msg to/from FW to catch endian mismatch by sparse. * Use BUILD_BUG_ON for structures sent/recv to/from FW. Co-developed-by: Vadym Kochan <vkochan@marvell.com> Signed-off-by: Vadym Kochan <vkochan@marvell.com> Signed-off-by: Yevhen Orlov <yevhen.orlov@plvision.eu> Signed-off-by: Taras Chornyi <tchornyi@marvell.com> Signed-off-by: Volodymyr Mytnyk <vmytnyk@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-29 13:38:07 +08:00
err = fw_event_parsers[msg_type].func(buf, &evt);
net: marvell: prestera: Add driver for Prestera family ASIC devices Marvell Prestera 98DX326x integrates up to 24 ports of 1GbE with 8 ports of 10GbE uplinks or 2 ports of 40Gbps stacking for a largely wireless SMB deployment. The current implementation supports only boards designed for the Marvell Switchdev solution and requires special firmware. The core Prestera switching logic is implemented in prestera_main.c, there is an intermediate hw layer between core logic and firmware. It is implemented in prestera_hw.c, the purpose of it is to encapsulate hw related logic, in future there is a plan to support more devices with different HW related configurations. This patch contains only basic switch initialization and RX/TX support over SDMA mechanism. Currently supported devices have DMA access range <= 32bit and require ZONE_DMA to be enabled, for such cases SDMA driver checks if the skb allocated in proper range supported by the Prestera device. Also meanwhile there is no TX interrupt support in current firmware version so recycling work is scheduled on each xmit. Port's mac address is generated from the switch base mac which may be provided via device-tree (static one or as nvme cell), or randomly generated. This is required by the firmware. Co-developed-by: Andrii Savka <andrii.savka@plvision.eu> Signed-off-by: Andrii Savka <andrii.savka@plvision.eu> Co-developed-by: Oleksandr Mazur <oleksandr.mazur@plvision.eu> Signed-off-by: Oleksandr Mazur <oleksandr.mazur@plvision.eu> Co-developed-by: Serhiy Boiko <serhiy.boiko@plvision.eu> Signed-off-by: Serhiy Boiko <serhiy.boiko@plvision.eu> Co-developed-by: Serhiy Pshyk <serhiy.pshyk@plvision.eu> Signed-off-by: Serhiy Pshyk <serhiy.pshyk@plvision.eu> Co-developed-by: Taras Chornyi <taras.chornyi@plvision.eu> Signed-off-by: Taras Chornyi <taras.chornyi@plvision.eu> Co-developed-by: Volodymyr Mytnyk <volodymyr.mytnyk@plvision.eu> Signed-off-by: Volodymyr Mytnyk <volodymyr.mytnyk@plvision.eu> Signed-off-by: Vadym Kochan <vadym.kochan@plvision.eu> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-17 00:30:57 +08:00
if (err)
return err;
eh.func(sw, &evt, eh.arg);
return 0;
}
static void prestera_pkt_recv(struct prestera_device *dev)
{
struct prestera_switch *sw = dev->priv;
struct prestera_fw_event_handler eh;
struct prestera_event ev;
int err;
ev.id = PRESTERA_RXTX_EVENT_RCV_PKT;
err = prestera_find_event_handler(sw, PRESTERA_EVENT_TYPE_RXTX, &eh);
if (err)
return;
eh.func(sw, &ev, eh.arg);
}
net: marvell: prestera: add firmware v4.0 support Add firmware (FW) version 4.0 support for Marvell Prestera driver. Major changes have been made to new v4.0 FW ABI to add support of new features, introduce the stability of the FW ABI and ensure better forward compatibility for the future driver vesrions. Current v4.0 FW feature set support does not expect any changes to ABI, as it was defined and tested through long period of time. The ABI may be extended in case of new features, but it will not break the backward compatibility. ABI major changes done in v4.0: - L1 ABI, where MAC and PHY API configuration are split. - ACL has been split to low-level TCAM and Counters ABI to provide more HW ACL capabilities for future driver versions. To support backward support, the addition compatibility layer is required in the driver which will have two different codebase under "if FW-VER elif FW-VER else" conditions that will be removed in the future anyway, So, the idea was to break backward support and focus on more stable FW instead of supporting old version with very minimal and limited set of features/capabilities. Improve FW msg validation: * Use __le64, __le32, __le16 types in msg to/from FW to catch endian mismatch by sparse. * Use BUILD_BUG_ON for structures sent/recv to/from FW. Co-developed-by: Vadym Kochan <vkochan@marvell.com> Signed-off-by: Vadym Kochan <vkochan@marvell.com> Signed-off-by: Yevhen Orlov <yevhen.orlov@plvision.eu> Signed-off-by: Taras Chornyi <tchornyi@marvell.com> Signed-off-by: Volodymyr Mytnyk <vmytnyk@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-29 13:38:07 +08:00
static u8 prestera_hw_mdix_to_eth(u8 mode)
{
switch (mode) {
case PRESTERA_PORT_TP_MDI:
return ETH_TP_MDI;
case PRESTERA_PORT_TP_MDIX:
return ETH_TP_MDI_X;
case PRESTERA_PORT_TP_AUTO:
return ETH_TP_MDI_AUTO;
default:
return ETH_TP_MDI_INVALID;
}
}
static u8 prestera_hw_mdix_from_eth(u8 mode)
{
switch (mode) {
case ETH_TP_MDI:
return PRESTERA_PORT_TP_MDI;
case ETH_TP_MDI_X:
return PRESTERA_PORT_TP_MDIX;
case ETH_TP_MDI_AUTO:
return PRESTERA_PORT_TP_AUTO;
default:
return PRESTERA_PORT_TP_NA;
}
}
net: marvell: prestera: Add driver for Prestera family ASIC devices Marvell Prestera 98DX326x integrates up to 24 ports of 1GbE with 8 ports of 10GbE uplinks or 2 ports of 40Gbps stacking for a largely wireless SMB deployment. The current implementation supports only boards designed for the Marvell Switchdev solution and requires special firmware. The core Prestera switching logic is implemented in prestera_main.c, there is an intermediate hw layer between core logic and firmware. It is implemented in prestera_hw.c, the purpose of it is to encapsulate hw related logic, in future there is a plan to support more devices with different HW related configurations. This patch contains only basic switch initialization and RX/TX support over SDMA mechanism. Currently supported devices have DMA access range <= 32bit and require ZONE_DMA to be enabled, for such cases SDMA driver checks if the skb allocated in proper range supported by the Prestera device. Also meanwhile there is no TX interrupt support in current firmware version so recycling work is scheduled on each xmit. Port's mac address is generated from the switch base mac which may be provided via device-tree (static one or as nvme cell), or randomly generated. This is required by the firmware. Co-developed-by: Andrii Savka <andrii.savka@plvision.eu> Signed-off-by: Andrii Savka <andrii.savka@plvision.eu> Co-developed-by: Oleksandr Mazur <oleksandr.mazur@plvision.eu> Signed-off-by: Oleksandr Mazur <oleksandr.mazur@plvision.eu> Co-developed-by: Serhiy Boiko <serhiy.boiko@plvision.eu> Signed-off-by: Serhiy Boiko <serhiy.boiko@plvision.eu> Co-developed-by: Serhiy Pshyk <serhiy.pshyk@plvision.eu> Signed-off-by: Serhiy Pshyk <serhiy.pshyk@plvision.eu> Co-developed-by: Taras Chornyi <taras.chornyi@plvision.eu> Signed-off-by: Taras Chornyi <taras.chornyi@plvision.eu> Co-developed-by: Volodymyr Mytnyk <volodymyr.mytnyk@plvision.eu> Signed-off-by: Volodymyr Mytnyk <volodymyr.mytnyk@plvision.eu> Signed-off-by: Vadym Kochan <vadym.kochan@plvision.eu> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-17 00:30:57 +08:00
int prestera_hw_port_info_get(const struct prestera_port *port,
u32 *dev_id, u32 *hw_id, u16 *fp_id)
{
struct prestera_msg_port_info_req req = {
net: marvell: prestera: add firmware v4.0 support Add firmware (FW) version 4.0 support for Marvell Prestera driver. Major changes have been made to new v4.0 FW ABI to add support of new features, introduce the stability of the FW ABI and ensure better forward compatibility for the future driver vesrions. Current v4.0 FW feature set support does not expect any changes to ABI, as it was defined and tested through long period of time. The ABI may be extended in case of new features, but it will not break the backward compatibility. ABI major changes done in v4.0: - L1 ABI, where MAC and PHY API configuration are split. - ACL has been split to low-level TCAM and Counters ABI to provide more HW ACL capabilities for future driver versions. To support backward support, the addition compatibility layer is required in the driver which will have two different codebase under "if FW-VER elif FW-VER else" conditions that will be removed in the future anyway, So, the idea was to break backward support and focus on more stable FW instead of supporting old version with very minimal and limited set of features/capabilities. Improve FW msg validation: * Use __le64, __le32, __le16 types in msg to/from FW to catch endian mismatch by sparse. * Use BUILD_BUG_ON for structures sent/recv to/from FW. Co-developed-by: Vadym Kochan <vkochan@marvell.com> Signed-off-by: Vadym Kochan <vkochan@marvell.com> Signed-off-by: Yevhen Orlov <yevhen.orlov@plvision.eu> Signed-off-by: Taras Chornyi <tchornyi@marvell.com> Signed-off-by: Volodymyr Mytnyk <vmytnyk@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-29 13:38:07 +08:00
.port = __cpu_to_le32(port->id),
net: marvell: prestera: Add driver for Prestera family ASIC devices Marvell Prestera 98DX326x integrates up to 24 ports of 1GbE with 8 ports of 10GbE uplinks or 2 ports of 40Gbps stacking for a largely wireless SMB deployment. The current implementation supports only boards designed for the Marvell Switchdev solution and requires special firmware. The core Prestera switching logic is implemented in prestera_main.c, there is an intermediate hw layer between core logic and firmware. It is implemented in prestera_hw.c, the purpose of it is to encapsulate hw related logic, in future there is a plan to support more devices with different HW related configurations. This patch contains only basic switch initialization and RX/TX support over SDMA mechanism. Currently supported devices have DMA access range <= 32bit and require ZONE_DMA to be enabled, for such cases SDMA driver checks if the skb allocated in proper range supported by the Prestera device. Also meanwhile there is no TX interrupt support in current firmware version so recycling work is scheduled on each xmit. Port's mac address is generated from the switch base mac which may be provided via device-tree (static one or as nvme cell), or randomly generated. This is required by the firmware. Co-developed-by: Andrii Savka <andrii.savka@plvision.eu> Signed-off-by: Andrii Savka <andrii.savka@plvision.eu> Co-developed-by: Oleksandr Mazur <oleksandr.mazur@plvision.eu> Signed-off-by: Oleksandr Mazur <oleksandr.mazur@plvision.eu> Co-developed-by: Serhiy Boiko <serhiy.boiko@plvision.eu> Signed-off-by: Serhiy Boiko <serhiy.boiko@plvision.eu> Co-developed-by: Serhiy Pshyk <serhiy.pshyk@plvision.eu> Signed-off-by: Serhiy Pshyk <serhiy.pshyk@plvision.eu> Co-developed-by: Taras Chornyi <taras.chornyi@plvision.eu> Signed-off-by: Taras Chornyi <taras.chornyi@plvision.eu> Co-developed-by: Volodymyr Mytnyk <volodymyr.mytnyk@plvision.eu> Signed-off-by: Volodymyr Mytnyk <volodymyr.mytnyk@plvision.eu> Signed-off-by: Vadym Kochan <vadym.kochan@plvision.eu> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-17 00:30:57 +08:00
};
struct prestera_msg_port_info_resp resp;
int err;
err = prestera_cmd_ret(port->sw, PRESTERA_CMD_TYPE_PORT_INFO_GET,
&req.cmd, sizeof(req), &resp.ret, sizeof(resp));
if (err)
return err;
net: marvell: prestera: add firmware v4.0 support Add firmware (FW) version 4.0 support for Marvell Prestera driver. Major changes have been made to new v4.0 FW ABI to add support of new features, introduce the stability of the FW ABI and ensure better forward compatibility for the future driver vesrions. Current v4.0 FW feature set support does not expect any changes to ABI, as it was defined and tested through long period of time. The ABI may be extended in case of new features, but it will not break the backward compatibility. ABI major changes done in v4.0: - L1 ABI, where MAC and PHY API configuration are split. - ACL has been split to low-level TCAM and Counters ABI to provide more HW ACL capabilities for future driver versions. To support backward support, the addition compatibility layer is required in the driver which will have two different codebase under "if FW-VER elif FW-VER else" conditions that will be removed in the future anyway, So, the idea was to break backward support and focus on more stable FW instead of supporting old version with very minimal and limited set of features/capabilities. Improve FW msg validation: * Use __le64, __le32, __le16 types in msg to/from FW to catch endian mismatch by sparse. * Use BUILD_BUG_ON for structures sent/recv to/from FW. Co-developed-by: Vadym Kochan <vkochan@marvell.com> Signed-off-by: Vadym Kochan <vkochan@marvell.com> Signed-off-by: Yevhen Orlov <yevhen.orlov@plvision.eu> Signed-off-by: Taras Chornyi <tchornyi@marvell.com> Signed-off-by: Volodymyr Mytnyk <vmytnyk@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-29 13:38:07 +08:00
*dev_id = __le32_to_cpu(resp.dev_id);
*hw_id = __le32_to_cpu(resp.hw_id);
*fp_id = __le16_to_cpu(resp.fp_id);
net: marvell: prestera: Add driver for Prestera family ASIC devices Marvell Prestera 98DX326x integrates up to 24 ports of 1GbE with 8 ports of 10GbE uplinks or 2 ports of 40Gbps stacking for a largely wireless SMB deployment. The current implementation supports only boards designed for the Marvell Switchdev solution and requires special firmware. The core Prestera switching logic is implemented in prestera_main.c, there is an intermediate hw layer between core logic and firmware. It is implemented in prestera_hw.c, the purpose of it is to encapsulate hw related logic, in future there is a plan to support more devices with different HW related configurations. This patch contains only basic switch initialization and RX/TX support over SDMA mechanism. Currently supported devices have DMA access range <= 32bit and require ZONE_DMA to be enabled, for such cases SDMA driver checks if the skb allocated in proper range supported by the Prestera device. Also meanwhile there is no TX interrupt support in current firmware version so recycling work is scheduled on each xmit. Port's mac address is generated from the switch base mac which may be provided via device-tree (static one or as nvme cell), or randomly generated. This is required by the firmware. Co-developed-by: Andrii Savka <andrii.savka@plvision.eu> Signed-off-by: Andrii Savka <andrii.savka@plvision.eu> Co-developed-by: Oleksandr Mazur <oleksandr.mazur@plvision.eu> Signed-off-by: Oleksandr Mazur <oleksandr.mazur@plvision.eu> Co-developed-by: Serhiy Boiko <serhiy.boiko@plvision.eu> Signed-off-by: Serhiy Boiko <serhiy.boiko@plvision.eu> Co-developed-by: Serhiy Pshyk <serhiy.pshyk@plvision.eu> Signed-off-by: Serhiy Pshyk <serhiy.pshyk@plvision.eu> Co-developed-by: Taras Chornyi <taras.chornyi@plvision.eu> Signed-off-by: Taras Chornyi <taras.chornyi@plvision.eu> Co-developed-by: Volodymyr Mytnyk <volodymyr.mytnyk@plvision.eu> Signed-off-by: Volodymyr Mytnyk <volodymyr.mytnyk@plvision.eu> Signed-off-by: Vadym Kochan <vadym.kochan@plvision.eu> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-17 00:30:57 +08:00
return 0;
}
int prestera_hw_switch_mac_set(struct prestera_switch *sw, const char *mac)
{
struct prestera_msg_switch_attr_req req = {
net: marvell: prestera: add firmware v4.0 support Add firmware (FW) version 4.0 support for Marvell Prestera driver. Major changes have been made to new v4.0 FW ABI to add support of new features, introduce the stability of the FW ABI and ensure better forward compatibility for the future driver vesrions. Current v4.0 FW feature set support does not expect any changes to ABI, as it was defined and tested through long period of time. The ABI may be extended in case of new features, but it will not break the backward compatibility. ABI major changes done in v4.0: - L1 ABI, where MAC and PHY API configuration are split. - ACL has been split to low-level TCAM and Counters ABI to provide more HW ACL capabilities for future driver versions. To support backward support, the addition compatibility layer is required in the driver which will have two different codebase under "if FW-VER elif FW-VER else" conditions that will be removed in the future anyway, So, the idea was to break backward support and focus on more stable FW instead of supporting old version with very minimal and limited set of features/capabilities. Improve FW msg validation: * Use __le64, __le32, __le16 types in msg to/from FW to catch endian mismatch by sparse. * Use BUILD_BUG_ON for structures sent/recv to/from FW. Co-developed-by: Vadym Kochan <vkochan@marvell.com> Signed-off-by: Vadym Kochan <vkochan@marvell.com> Signed-off-by: Yevhen Orlov <yevhen.orlov@plvision.eu> Signed-off-by: Taras Chornyi <tchornyi@marvell.com> Signed-off-by: Volodymyr Mytnyk <vmytnyk@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-29 13:38:07 +08:00
.attr = __cpu_to_le32(PRESTERA_CMD_SWITCH_ATTR_MAC),
net: marvell: prestera: Add driver for Prestera family ASIC devices Marvell Prestera 98DX326x integrates up to 24 ports of 1GbE with 8 ports of 10GbE uplinks or 2 ports of 40Gbps stacking for a largely wireless SMB deployment. The current implementation supports only boards designed for the Marvell Switchdev solution and requires special firmware. The core Prestera switching logic is implemented in prestera_main.c, there is an intermediate hw layer between core logic and firmware. It is implemented in prestera_hw.c, the purpose of it is to encapsulate hw related logic, in future there is a plan to support more devices with different HW related configurations. This patch contains only basic switch initialization and RX/TX support over SDMA mechanism. Currently supported devices have DMA access range <= 32bit and require ZONE_DMA to be enabled, for such cases SDMA driver checks if the skb allocated in proper range supported by the Prestera device. Also meanwhile there is no TX interrupt support in current firmware version so recycling work is scheduled on each xmit. Port's mac address is generated from the switch base mac which may be provided via device-tree (static one or as nvme cell), or randomly generated. This is required by the firmware. Co-developed-by: Andrii Savka <andrii.savka@plvision.eu> Signed-off-by: Andrii Savka <andrii.savka@plvision.eu> Co-developed-by: Oleksandr Mazur <oleksandr.mazur@plvision.eu> Signed-off-by: Oleksandr Mazur <oleksandr.mazur@plvision.eu> Co-developed-by: Serhiy Boiko <serhiy.boiko@plvision.eu> Signed-off-by: Serhiy Boiko <serhiy.boiko@plvision.eu> Co-developed-by: Serhiy Pshyk <serhiy.pshyk@plvision.eu> Signed-off-by: Serhiy Pshyk <serhiy.pshyk@plvision.eu> Co-developed-by: Taras Chornyi <taras.chornyi@plvision.eu> Signed-off-by: Taras Chornyi <taras.chornyi@plvision.eu> Co-developed-by: Volodymyr Mytnyk <volodymyr.mytnyk@plvision.eu> Signed-off-by: Volodymyr Mytnyk <volodymyr.mytnyk@plvision.eu> Signed-off-by: Vadym Kochan <vadym.kochan@plvision.eu> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-17 00:30:57 +08:00
};
ether_addr_copy(req.param.mac, mac);
return prestera_cmd(sw, PRESTERA_CMD_TYPE_SWITCH_ATTR_SET,
&req.cmd, sizeof(req));
}
int prestera_hw_switch_init(struct prestera_switch *sw)
{
struct prestera_msg_switch_init_resp resp;
struct prestera_msg_common_req req;
int err;
INIT_LIST_HEAD(&sw->event_handlers);
net: marvell: prestera: add firmware v4.0 support Add firmware (FW) version 4.0 support for Marvell Prestera driver. Major changes have been made to new v4.0 FW ABI to add support of new features, introduce the stability of the FW ABI and ensure better forward compatibility for the future driver vesrions. Current v4.0 FW feature set support does not expect any changes to ABI, as it was defined and tested through long period of time. The ABI may be extended in case of new features, but it will not break the backward compatibility. ABI major changes done in v4.0: - L1 ABI, where MAC and PHY API configuration are split. - ACL has been split to low-level TCAM and Counters ABI to provide more HW ACL capabilities for future driver versions. To support backward support, the addition compatibility layer is required in the driver which will have two different codebase under "if FW-VER elif FW-VER else" conditions that will be removed in the future anyway, So, the idea was to break backward support and focus on more stable FW instead of supporting old version with very minimal and limited set of features/capabilities. Improve FW msg validation: * Use __le64, __le32, __le16 types in msg to/from FW to catch endian mismatch by sparse. * Use BUILD_BUG_ON for structures sent/recv to/from FW. Co-developed-by: Vadym Kochan <vkochan@marvell.com> Signed-off-by: Vadym Kochan <vkochan@marvell.com> Signed-off-by: Yevhen Orlov <yevhen.orlov@plvision.eu> Signed-off-by: Taras Chornyi <tchornyi@marvell.com> Signed-off-by: Volodymyr Mytnyk <vmytnyk@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-29 13:38:07 +08:00
prestera_hw_build_tests();
net: marvell: prestera: Add driver for Prestera family ASIC devices Marvell Prestera 98DX326x integrates up to 24 ports of 1GbE with 8 ports of 10GbE uplinks or 2 ports of 40Gbps stacking for a largely wireless SMB deployment. The current implementation supports only boards designed for the Marvell Switchdev solution and requires special firmware. The core Prestera switching logic is implemented in prestera_main.c, there is an intermediate hw layer between core logic and firmware. It is implemented in prestera_hw.c, the purpose of it is to encapsulate hw related logic, in future there is a plan to support more devices with different HW related configurations. This patch contains only basic switch initialization and RX/TX support over SDMA mechanism. Currently supported devices have DMA access range <= 32bit and require ZONE_DMA to be enabled, for such cases SDMA driver checks if the skb allocated in proper range supported by the Prestera device. Also meanwhile there is no TX interrupt support in current firmware version so recycling work is scheduled on each xmit. Port's mac address is generated from the switch base mac which may be provided via device-tree (static one or as nvme cell), or randomly generated. This is required by the firmware. Co-developed-by: Andrii Savka <andrii.savka@plvision.eu> Signed-off-by: Andrii Savka <andrii.savka@plvision.eu> Co-developed-by: Oleksandr Mazur <oleksandr.mazur@plvision.eu> Signed-off-by: Oleksandr Mazur <oleksandr.mazur@plvision.eu> Co-developed-by: Serhiy Boiko <serhiy.boiko@plvision.eu> Signed-off-by: Serhiy Boiko <serhiy.boiko@plvision.eu> Co-developed-by: Serhiy Pshyk <serhiy.pshyk@plvision.eu> Signed-off-by: Serhiy Pshyk <serhiy.pshyk@plvision.eu> Co-developed-by: Taras Chornyi <taras.chornyi@plvision.eu> Signed-off-by: Taras Chornyi <taras.chornyi@plvision.eu> Co-developed-by: Volodymyr Mytnyk <volodymyr.mytnyk@plvision.eu> Signed-off-by: Volodymyr Mytnyk <volodymyr.mytnyk@plvision.eu> Signed-off-by: Vadym Kochan <vadym.kochan@plvision.eu> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-17 00:30:57 +08:00
err = prestera_cmd_ret_wait(sw, PRESTERA_CMD_TYPE_SWITCH_INIT,
&req.cmd, sizeof(req),
&resp.ret, sizeof(resp),
PRESTERA_SWITCH_INIT_TIMEOUT_MS);
if (err)
return err;
sw->dev->recv_msg = prestera_evt_recv;
sw->dev->recv_pkt = prestera_pkt_recv;
net: marvell: prestera: add firmware v4.0 support Add firmware (FW) version 4.0 support for Marvell Prestera driver. Major changes have been made to new v4.0 FW ABI to add support of new features, introduce the stability of the FW ABI and ensure better forward compatibility for the future driver vesrions. Current v4.0 FW feature set support does not expect any changes to ABI, as it was defined and tested through long period of time. The ABI may be extended in case of new features, but it will not break the backward compatibility. ABI major changes done in v4.0: - L1 ABI, where MAC and PHY API configuration are split. - ACL has been split to low-level TCAM and Counters ABI to provide more HW ACL capabilities for future driver versions. To support backward support, the addition compatibility layer is required in the driver which will have two different codebase under "if FW-VER elif FW-VER else" conditions that will be removed in the future anyway, So, the idea was to break backward support and focus on more stable FW instead of supporting old version with very minimal and limited set of features/capabilities. Improve FW msg validation: * Use __le64, __le32, __le16 types in msg to/from FW to catch endian mismatch by sparse. * Use BUILD_BUG_ON for structures sent/recv to/from FW. Co-developed-by: Vadym Kochan <vkochan@marvell.com> Signed-off-by: Vadym Kochan <vkochan@marvell.com> Signed-off-by: Yevhen Orlov <yevhen.orlov@plvision.eu> Signed-off-by: Taras Chornyi <tchornyi@marvell.com> Signed-off-by: Volodymyr Mytnyk <vmytnyk@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-29 13:38:07 +08:00
sw->port_count = __le32_to_cpu(resp.port_count);
net: marvell: prestera: Add driver for Prestera family ASIC devices Marvell Prestera 98DX326x integrates up to 24 ports of 1GbE with 8 ports of 10GbE uplinks or 2 ports of 40Gbps stacking for a largely wireless SMB deployment. The current implementation supports only boards designed for the Marvell Switchdev solution and requires special firmware. The core Prestera switching logic is implemented in prestera_main.c, there is an intermediate hw layer between core logic and firmware. It is implemented in prestera_hw.c, the purpose of it is to encapsulate hw related logic, in future there is a plan to support more devices with different HW related configurations. This patch contains only basic switch initialization and RX/TX support over SDMA mechanism. Currently supported devices have DMA access range <= 32bit and require ZONE_DMA to be enabled, for such cases SDMA driver checks if the skb allocated in proper range supported by the Prestera device. Also meanwhile there is no TX interrupt support in current firmware version so recycling work is scheduled on each xmit. Port's mac address is generated from the switch base mac which may be provided via device-tree (static one or as nvme cell), or randomly generated. This is required by the firmware. Co-developed-by: Andrii Savka <andrii.savka@plvision.eu> Signed-off-by: Andrii Savka <andrii.savka@plvision.eu> Co-developed-by: Oleksandr Mazur <oleksandr.mazur@plvision.eu> Signed-off-by: Oleksandr Mazur <oleksandr.mazur@plvision.eu> Co-developed-by: Serhiy Boiko <serhiy.boiko@plvision.eu> Signed-off-by: Serhiy Boiko <serhiy.boiko@plvision.eu> Co-developed-by: Serhiy Pshyk <serhiy.pshyk@plvision.eu> Signed-off-by: Serhiy Pshyk <serhiy.pshyk@plvision.eu> Co-developed-by: Taras Chornyi <taras.chornyi@plvision.eu> Signed-off-by: Taras Chornyi <taras.chornyi@plvision.eu> Co-developed-by: Volodymyr Mytnyk <volodymyr.mytnyk@plvision.eu> Signed-off-by: Volodymyr Mytnyk <volodymyr.mytnyk@plvision.eu> Signed-off-by: Vadym Kochan <vadym.kochan@plvision.eu> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-17 00:30:57 +08:00
sw->mtu_min = PRESTERA_MIN_MTU;
net: marvell: prestera: add firmware v4.0 support Add firmware (FW) version 4.0 support for Marvell Prestera driver. Major changes have been made to new v4.0 FW ABI to add support of new features, introduce the stability of the FW ABI and ensure better forward compatibility for the future driver vesrions. Current v4.0 FW feature set support does not expect any changes to ABI, as it was defined and tested through long period of time. The ABI may be extended in case of new features, but it will not break the backward compatibility. ABI major changes done in v4.0: - L1 ABI, where MAC and PHY API configuration are split. - ACL has been split to low-level TCAM and Counters ABI to provide more HW ACL capabilities for future driver versions. To support backward support, the addition compatibility layer is required in the driver which will have two different codebase under "if FW-VER elif FW-VER else" conditions that will be removed in the future anyway, So, the idea was to break backward support and focus on more stable FW instead of supporting old version with very minimal and limited set of features/capabilities. Improve FW msg validation: * Use __le64, __le32, __le16 types in msg to/from FW to catch endian mismatch by sparse. * Use BUILD_BUG_ON for structures sent/recv to/from FW. Co-developed-by: Vadym Kochan <vkochan@marvell.com> Signed-off-by: Vadym Kochan <vkochan@marvell.com> Signed-off-by: Yevhen Orlov <yevhen.orlov@plvision.eu> Signed-off-by: Taras Chornyi <tchornyi@marvell.com> Signed-off-by: Volodymyr Mytnyk <vmytnyk@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-29 13:38:07 +08:00
sw->mtu_max = __le32_to_cpu(resp.mtu_max);
net: marvell: prestera: Add driver for Prestera family ASIC devices Marvell Prestera 98DX326x integrates up to 24 ports of 1GbE with 8 ports of 10GbE uplinks or 2 ports of 40Gbps stacking for a largely wireless SMB deployment. The current implementation supports only boards designed for the Marvell Switchdev solution and requires special firmware. The core Prestera switching logic is implemented in prestera_main.c, there is an intermediate hw layer between core logic and firmware. It is implemented in prestera_hw.c, the purpose of it is to encapsulate hw related logic, in future there is a plan to support more devices with different HW related configurations. This patch contains only basic switch initialization and RX/TX support over SDMA mechanism. Currently supported devices have DMA access range <= 32bit and require ZONE_DMA to be enabled, for such cases SDMA driver checks if the skb allocated in proper range supported by the Prestera device. Also meanwhile there is no TX interrupt support in current firmware version so recycling work is scheduled on each xmit. Port's mac address is generated from the switch base mac which may be provided via device-tree (static one or as nvme cell), or randomly generated. This is required by the firmware. Co-developed-by: Andrii Savka <andrii.savka@plvision.eu> Signed-off-by: Andrii Savka <andrii.savka@plvision.eu> Co-developed-by: Oleksandr Mazur <oleksandr.mazur@plvision.eu> Signed-off-by: Oleksandr Mazur <oleksandr.mazur@plvision.eu> Co-developed-by: Serhiy Boiko <serhiy.boiko@plvision.eu> Signed-off-by: Serhiy Boiko <serhiy.boiko@plvision.eu> Co-developed-by: Serhiy Pshyk <serhiy.pshyk@plvision.eu> Signed-off-by: Serhiy Pshyk <serhiy.pshyk@plvision.eu> Co-developed-by: Taras Chornyi <taras.chornyi@plvision.eu> Signed-off-by: Taras Chornyi <taras.chornyi@plvision.eu> Co-developed-by: Volodymyr Mytnyk <volodymyr.mytnyk@plvision.eu> Signed-off-by: Volodymyr Mytnyk <volodymyr.mytnyk@plvision.eu> Signed-off-by: Vadym Kochan <vadym.kochan@plvision.eu> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-17 00:30:57 +08:00
sw->id = resp.switch_id;
sw->lag_member_max = resp.lag_member_max;
sw->lag_max = resp.lag_max;
net: marvell: prestera: Add driver for Prestera family ASIC devices Marvell Prestera 98DX326x integrates up to 24 ports of 1GbE with 8 ports of 10GbE uplinks or 2 ports of 40Gbps stacking for a largely wireless SMB deployment. The current implementation supports only boards designed for the Marvell Switchdev solution and requires special firmware. The core Prestera switching logic is implemented in prestera_main.c, there is an intermediate hw layer between core logic and firmware. It is implemented in prestera_hw.c, the purpose of it is to encapsulate hw related logic, in future there is a plan to support more devices with different HW related configurations. This patch contains only basic switch initialization and RX/TX support over SDMA mechanism. Currently supported devices have DMA access range <= 32bit and require ZONE_DMA to be enabled, for such cases SDMA driver checks if the skb allocated in proper range supported by the Prestera device. Also meanwhile there is no TX interrupt support in current firmware version so recycling work is scheduled on each xmit. Port's mac address is generated from the switch base mac which may be provided via device-tree (static one or as nvme cell), or randomly generated. This is required by the firmware. Co-developed-by: Andrii Savka <andrii.savka@plvision.eu> Signed-off-by: Andrii Savka <andrii.savka@plvision.eu> Co-developed-by: Oleksandr Mazur <oleksandr.mazur@plvision.eu> Signed-off-by: Oleksandr Mazur <oleksandr.mazur@plvision.eu> Co-developed-by: Serhiy Boiko <serhiy.boiko@plvision.eu> Signed-off-by: Serhiy Boiko <serhiy.boiko@plvision.eu> Co-developed-by: Serhiy Pshyk <serhiy.pshyk@plvision.eu> Signed-off-by: Serhiy Pshyk <serhiy.pshyk@plvision.eu> Co-developed-by: Taras Chornyi <taras.chornyi@plvision.eu> Signed-off-by: Taras Chornyi <taras.chornyi@plvision.eu> Co-developed-by: Volodymyr Mytnyk <volodymyr.mytnyk@plvision.eu> Signed-off-by: Volodymyr Mytnyk <volodymyr.mytnyk@plvision.eu> Signed-off-by: Vadym Kochan <vadym.kochan@plvision.eu> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-17 00:30:57 +08:00
return 0;
}
void prestera_hw_switch_fini(struct prestera_switch *sw)
{
WARN_ON(!list_empty(&sw->event_handlers));
}
int prestera_hw_switch_ageing_set(struct prestera_switch *sw, u32 ageing_ms)
{
struct prestera_msg_switch_attr_req req = {
net: marvell: prestera: add firmware v4.0 support Add firmware (FW) version 4.0 support for Marvell Prestera driver. Major changes have been made to new v4.0 FW ABI to add support of new features, introduce the stability of the FW ABI and ensure better forward compatibility for the future driver vesrions. Current v4.0 FW feature set support does not expect any changes to ABI, as it was defined and tested through long period of time. The ABI may be extended in case of new features, but it will not break the backward compatibility. ABI major changes done in v4.0: - L1 ABI, where MAC and PHY API configuration are split. - ACL has been split to low-level TCAM and Counters ABI to provide more HW ACL capabilities for future driver versions. To support backward support, the addition compatibility layer is required in the driver which will have two different codebase under "if FW-VER elif FW-VER else" conditions that will be removed in the future anyway, So, the idea was to break backward support and focus on more stable FW instead of supporting old version with very minimal and limited set of features/capabilities. Improve FW msg validation: * Use __le64, __le32, __le16 types in msg to/from FW to catch endian mismatch by sparse. * Use BUILD_BUG_ON for structures sent/recv to/from FW. Co-developed-by: Vadym Kochan <vkochan@marvell.com> Signed-off-by: Vadym Kochan <vkochan@marvell.com> Signed-off-by: Yevhen Orlov <yevhen.orlov@plvision.eu> Signed-off-by: Taras Chornyi <tchornyi@marvell.com> Signed-off-by: Volodymyr Mytnyk <vmytnyk@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-29 13:38:07 +08:00
.attr = __cpu_to_le32(PRESTERA_CMD_SWITCH_ATTR_AGEING),
.param = {
net: marvell: prestera: add firmware v4.0 support Add firmware (FW) version 4.0 support for Marvell Prestera driver. Major changes have been made to new v4.0 FW ABI to add support of new features, introduce the stability of the FW ABI and ensure better forward compatibility for the future driver vesrions. Current v4.0 FW feature set support does not expect any changes to ABI, as it was defined and tested through long period of time. The ABI may be extended in case of new features, but it will not break the backward compatibility. ABI major changes done in v4.0: - L1 ABI, where MAC and PHY API configuration are split. - ACL has been split to low-level TCAM and Counters ABI to provide more HW ACL capabilities for future driver versions. To support backward support, the addition compatibility layer is required in the driver which will have two different codebase under "if FW-VER elif FW-VER else" conditions that will be removed in the future anyway, So, the idea was to break backward support and focus on more stable FW instead of supporting old version with very minimal and limited set of features/capabilities. Improve FW msg validation: * Use __le64, __le32, __le16 types in msg to/from FW to catch endian mismatch by sparse. * Use BUILD_BUG_ON for structures sent/recv to/from FW. Co-developed-by: Vadym Kochan <vkochan@marvell.com> Signed-off-by: Vadym Kochan <vkochan@marvell.com> Signed-off-by: Yevhen Orlov <yevhen.orlov@plvision.eu> Signed-off-by: Taras Chornyi <tchornyi@marvell.com> Signed-off-by: Volodymyr Mytnyk <vmytnyk@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-29 13:38:07 +08:00
.ageing_timeout_ms = __cpu_to_le32(ageing_ms),
},
};
return prestera_cmd(sw, PRESTERA_CMD_TYPE_SWITCH_ATTR_SET,
&req.cmd, sizeof(req));
}
net: marvell: prestera: add firmware v4.0 support Add firmware (FW) version 4.0 support for Marvell Prestera driver. Major changes have been made to new v4.0 FW ABI to add support of new features, introduce the stability of the FW ABI and ensure better forward compatibility for the future driver vesrions. Current v4.0 FW feature set support does not expect any changes to ABI, as it was defined and tested through long period of time. The ABI may be extended in case of new features, but it will not break the backward compatibility. ABI major changes done in v4.0: - L1 ABI, where MAC and PHY API configuration are split. - ACL has been split to low-level TCAM and Counters ABI to provide more HW ACL capabilities for future driver versions. To support backward support, the addition compatibility layer is required in the driver which will have two different codebase under "if FW-VER elif FW-VER else" conditions that will be removed in the future anyway, So, the idea was to break backward support and focus on more stable FW instead of supporting old version with very minimal and limited set of features/capabilities. Improve FW msg validation: * Use __le64, __le32, __le16 types in msg to/from FW to catch endian mismatch by sparse. * Use BUILD_BUG_ON for structures sent/recv to/from FW. Co-developed-by: Vadym Kochan <vkochan@marvell.com> Signed-off-by: Vadym Kochan <vkochan@marvell.com> Signed-off-by: Yevhen Orlov <yevhen.orlov@plvision.eu> Signed-off-by: Taras Chornyi <tchornyi@marvell.com> Signed-off-by: Volodymyr Mytnyk <vmytnyk@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-29 13:38:07 +08:00
int prestera_hw_port_mac_mode_get(const struct prestera_port *port,
u32 *mode, u32 *speed, u8 *duplex, u8 *fec)
{
struct prestera_msg_port_attr_resp resp;
struct prestera_msg_port_attr_req req = {
.attr = __cpu_to_le32(PRESTERA_CMD_PORT_ATTR_MAC_MODE),
.port = __cpu_to_le32(port->hw_id),
.dev = __cpu_to_le32(port->dev_id)
};
int err;
err = prestera_cmd_ret(port->sw, PRESTERA_CMD_TYPE_PORT_ATTR_GET,
&req.cmd, sizeof(req), &resp.ret, sizeof(resp));
if (err)
return err;
if (mode)
*mode = __le32_to_cpu(resp.param.link_evt.mac.mode);
if (speed)
*speed = __le32_to_cpu(resp.param.link_evt.mac.speed);
if (duplex)
*duplex = resp.param.link_evt.mac.duplex;
if (fec)
*fec = resp.param.link_evt.mac.fec;
return err;
}
int prestera_hw_port_mac_mode_set(const struct prestera_port *port,
bool admin, u32 mode, u8 inband,
u32 speed, u8 duplex, u8 fec)
net: marvell: prestera: Add driver for Prestera family ASIC devices Marvell Prestera 98DX326x integrates up to 24 ports of 1GbE with 8 ports of 10GbE uplinks or 2 ports of 40Gbps stacking for a largely wireless SMB deployment. The current implementation supports only boards designed for the Marvell Switchdev solution and requires special firmware. The core Prestera switching logic is implemented in prestera_main.c, there is an intermediate hw layer between core logic and firmware. It is implemented in prestera_hw.c, the purpose of it is to encapsulate hw related logic, in future there is a plan to support more devices with different HW related configurations. This patch contains only basic switch initialization and RX/TX support over SDMA mechanism. Currently supported devices have DMA access range <= 32bit and require ZONE_DMA to be enabled, for such cases SDMA driver checks if the skb allocated in proper range supported by the Prestera device. Also meanwhile there is no TX interrupt support in current firmware version so recycling work is scheduled on each xmit. Port's mac address is generated from the switch base mac which may be provided via device-tree (static one or as nvme cell), or randomly generated. This is required by the firmware. Co-developed-by: Andrii Savka <andrii.savka@plvision.eu> Signed-off-by: Andrii Savka <andrii.savka@plvision.eu> Co-developed-by: Oleksandr Mazur <oleksandr.mazur@plvision.eu> Signed-off-by: Oleksandr Mazur <oleksandr.mazur@plvision.eu> Co-developed-by: Serhiy Boiko <serhiy.boiko@plvision.eu> Signed-off-by: Serhiy Boiko <serhiy.boiko@plvision.eu> Co-developed-by: Serhiy Pshyk <serhiy.pshyk@plvision.eu> Signed-off-by: Serhiy Pshyk <serhiy.pshyk@plvision.eu> Co-developed-by: Taras Chornyi <taras.chornyi@plvision.eu> Signed-off-by: Taras Chornyi <taras.chornyi@plvision.eu> Co-developed-by: Volodymyr Mytnyk <volodymyr.mytnyk@plvision.eu> Signed-off-by: Volodymyr Mytnyk <volodymyr.mytnyk@plvision.eu> Signed-off-by: Vadym Kochan <vadym.kochan@plvision.eu> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-17 00:30:57 +08:00
{
struct prestera_msg_port_attr_req req = {
net: marvell: prestera: add firmware v4.0 support Add firmware (FW) version 4.0 support for Marvell Prestera driver. Major changes have been made to new v4.0 FW ABI to add support of new features, introduce the stability of the FW ABI and ensure better forward compatibility for the future driver vesrions. Current v4.0 FW feature set support does not expect any changes to ABI, as it was defined and tested through long period of time. The ABI may be extended in case of new features, but it will not break the backward compatibility. ABI major changes done in v4.0: - L1 ABI, where MAC and PHY API configuration are split. - ACL has been split to low-level TCAM and Counters ABI to provide more HW ACL capabilities for future driver versions. To support backward support, the addition compatibility layer is required in the driver which will have two different codebase under "if FW-VER elif FW-VER else" conditions that will be removed in the future anyway, So, the idea was to break backward support and focus on more stable FW instead of supporting old version with very minimal and limited set of features/capabilities. Improve FW msg validation: * Use __le64, __le32, __le16 types in msg to/from FW to catch endian mismatch by sparse. * Use BUILD_BUG_ON for structures sent/recv to/from FW. Co-developed-by: Vadym Kochan <vkochan@marvell.com> Signed-off-by: Vadym Kochan <vkochan@marvell.com> Signed-off-by: Yevhen Orlov <yevhen.orlov@plvision.eu> Signed-off-by: Taras Chornyi <tchornyi@marvell.com> Signed-off-by: Volodymyr Mytnyk <vmytnyk@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-29 13:38:07 +08:00
.attr = __cpu_to_le32(PRESTERA_CMD_PORT_ATTR_MAC_MODE),
.port = __cpu_to_le32(port->hw_id),
.dev = __cpu_to_le32(port->dev_id),
net: marvell: prestera: Add driver for Prestera family ASIC devices Marvell Prestera 98DX326x integrates up to 24 ports of 1GbE with 8 ports of 10GbE uplinks or 2 ports of 40Gbps stacking for a largely wireless SMB deployment. The current implementation supports only boards designed for the Marvell Switchdev solution and requires special firmware. The core Prestera switching logic is implemented in prestera_main.c, there is an intermediate hw layer between core logic and firmware. It is implemented in prestera_hw.c, the purpose of it is to encapsulate hw related logic, in future there is a plan to support more devices with different HW related configurations. This patch contains only basic switch initialization and RX/TX support over SDMA mechanism. Currently supported devices have DMA access range <= 32bit and require ZONE_DMA to be enabled, for such cases SDMA driver checks if the skb allocated in proper range supported by the Prestera device. Also meanwhile there is no TX interrupt support in current firmware version so recycling work is scheduled on each xmit. Port's mac address is generated from the switch base mac which may be provided via device-tree (static one or as nvme cell), or randomly generated. This is required by the firmware. Co-developed-by: Andrii Savka <andrii.savka@plvision.eu> Signed-off-by: Andrii Savka <andrii.savka@plvision.eu> Co-developed-by: Oleksandr Mazur <oleksandr.mazur@plvision.eu> Signed-off-by: Oleksandr Mazur <oleksandr.mazur@plvision.eu> Co-developed-by: Serhiy Boiko <serhiy.boiko@plvision.eu> Signed-off-by: Serhiy Boiko <serhiy.boiko@plvision.eu> Co-developed-by: Serhiy Pshyk <serhiy.pshyk@plvision.eu> Signed-off-by: Serhiy Pshyk <serhiy.pshyk@plvision.eu> Co-developed-by: Taras Chornyi <taras.chornyi@plvision.eu> Signed-off-by: Taras Chornyi <taras.chornyi@plvision.eu> Co-developed-by: Volodymyr Mytnyk <volodymyr.mytnyk@plvision.eu> Signed-off-by: Volodymyr Mytnyk <volodymyr.mytnyk@plvision.eu> Signed-off-by: Vadym Kochan <vadym.kochan@plvision.eu> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-17 00:30:57 +08:00
.param = {
net: marvell: prestera: add firmware v4.0 support Add firmware (FW) version 4.0 support for Marvell Prestera driver. Major changes have been made to new v4.0 FW ABI to add support of new features, introduce the stability of the FW ABI and ensure better forward compatibility for the future driver vesrions. Current v4.0 FW feature set support does not expect any changes to ABI, as it was defined and tested through long period of time. The ABI may be extended in case of new features, but it will not break the backward compatibility. ABI major changes done in v4.0: - L1 ABI, where MAC and PHY API configuration are split. - ACL has been split to low-level TCAM and Counters ABI to provide more HW ACL capabilities for future driver versions. To support backward support, the addition compatibility layer is required in the driver which will have two different codebase under "if FW-VER elif FW-VER else" conditions that will be removed in the future anyway, So, the idea was to break backward support and focus on more stable FW instead of supporting old version with very minimal and limited set of features/capabilities. Improve FW msg validation: * Use __le64, __le32, __le16 types in msg to/from FW to catch endian mismatch by sparse. * Use BUILD_BUG_ON for structures sent/recv to/from FW. Co-developed-by: Vadym Kochan <vkochan@marvell.com> Signed-off-by: Vadym Kochan <vkochan@marvell.com> Signed-off-by: Yevhen Orlov <yevhen.orlov@plvision.eu> Signed-off-by: Taras Chornyi <tchornyi@marvell.com> Signed-off-by: Volodymyr Mytnyk <vmytnyk@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-29 13:38:07 +08:00
.link = {
.mac = {
.admin = admin,
.reg_mode.mode = __cpu_to_le32(mode),
.reg_mode.inband = inband,
.reg_mode.speed = __cpu_to_le32(speed),
.reg_mode.duplex = duplex,
.reg_mode.fec = fec
}
}
net: marvell: prestera: Add driver for Prestera family ASIC devices Marvell Prestera 98DX326x integrates up to 24 ports of 1GbE with 8 ports of 10GbE uplinks or 2 ports of 40Gbps stacking for a largely wireless SMB deployment. The current implementation supports only boards designed for the Marvell Switchdev solution and requires special firmware. The core Prestera switching logic is implemented in prestera_main.c, there is an intermediate hw layer between core logic and firmware. It is implemented in prestera_hw.c, the purpose of it is to encapsulate hw related logic, in future there is a plan to support more devices with different HW related configurations. This patch contains only basic switch initialization and RX/TX support over SDMA mechanism. Currently supported devices have DMA access range <= 32bit and require ZONE_DMA to be enabled, for such cases SDMA driver checks if the skb allocated in proper range supported by the Prestera device. Also meanwhile there is no TX interrupt support in current firmware version so recycling work is scheduled on each xmit. Port's mac address is generated from the switch base mac which may be provided via device-tree (static one or as nvme cell), or randomly generated. This is required by the firmware. Co-developed-by: Andrii Savka <andrii.savka@plvision.eu> Signed-off-by: Andrii Savka <andrii.savka@plvision.eu> Co-developed-by: Oleksandr Mazur <oleksandr.mazur@plvision.eu> Signed-off-by: Oleksandr Mazur <oleksandr.mazur@plvision.eu> Co-developed-by: Serhiy Boiko <serhiy.boiko@plvision.eu> Signed-off-by: Serhiy Boiko <serhiy.boiko@plvision.eu> Co-developed-by: Serhiy Pshyk <serhiy.pshyk@plvision.eu> Signed-off-by: Serhiy Pshyk <serhiy.pshyk@plvision.eu> Co-developed-by: Taras Chornyi <taras.chornyi@plvision.eu> Signed-off-by: Taras Chornyi <taras.chornyi@plvision.eu> Co-developed-by: Volodymyr Mytnyk <volodymyr.mytnyk@plvision.eu> Signed-off-by: Volodymyr Mytnyk <volodymyr.mytnyk@plvision.eu> Signed-off-by: Vadym Kochan <vadym.kochan@plvision.eu> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-17 00:30:57 +08:00
}
};
return prestera_cmd(port->sw, PRESTERA_CMD_TYPE_PORT_ATTR_SET,
&req.cmd, sizeof(req));
}
net: marvell: prestera: add firmware v4.0 support Add firmware (FW) version 4.0 support for Marvell Prestera driver. Major changes have been made to new v4.0 FW ABI to add support of new features, introduce the stability of the FW ABI and ensure better forward compatibility for the future driver vesrions. Current v4.0 FW feature set support does not expect any changes to ABI, as it was defined and tested through long period of time. The ABI may be extended in case of new features, but it will not break the backward compatibility. ABI major changes done in v4.0: - L1 ABI, where MAC and PHY API configuration are split. - ACL has been split to low-level TCAM and Counters ABI to provide more HW ACL capabilities for future driver versions. To support backward support, the addition compatibility layer is required in the driver which will have two different codebase under "if FW-VER elif FW-VER else" conditions that will be removed in the future anyway, So, the idea was to break backward support and focus on more stable FW instead of supporting old version with very minimal and limited set of features/capabilities. Improve FW msg validation: * Use __le64, __le32, __le16 types in msg to/from FW to catch endian mismatch by sparse. * Use BUILD_BUG_ON for structures sent/recv to/from FW. Co-developed-by: Vadym Kochan <vkochan@marvell.com> Signed-off-by: Vadym Kochan <vkochan@marvell.com> Signed-off-by: Yevhen Orlov <yevhen.orlov@plvision.eu> Signed-off-by: Taras Chornyi <tchornyi@marvell.com> Signed-off-by: Volodymyr Mytnyk <vmytnyk@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-29 13:38:07 +08:00
int prestera_hw_port_phy_mode_get(const struct prestera_port *port,
u8 *mdix, u64 *lmode_bmap,
bool *fc_pause, bool *fc_asym)
{
struct prestera_msg_port_attr_resp resp;
struct prestera_msg_port_attr_req req = {
.attr = __cpu_to_le32(PRESTERA_CMD_PORT_ATTR_PHY_MODE),
.port = __cpu_to_le32(port->hw_id),
.dev = __cpu_to_le32(port->dev_id)
};
int err;
err = prestera_cmd_ret(port->sw, PRESTERA_CMD_TYPE_PORT_ATTR_GET,
&req.cmd, sizeof(req), &resp.ret, sizeof(resp));
if (err)
return err;
if (mdix)
*mdix = prestera_hw_mdix_to_eth(resp.param.link_evt.phy.mdix);
if (lmode_bmap)
*lmode_bmap = __le64_to_cpu(resp.param.link_evt.phy.lmode_bmap);
if (fc_pause && fc_asym)
prestera_hw_remote_fc_to_eth(resp.param.link_evt.phy.fc,
fc_pause, fc_asym);
return err;
}
int prestera_hw_port_phy_mode_set(const struct prestera_port *port,
bool admin, bool adv, u32 mode, u64 modes,
u8 mdix)
{
struct prestera_msg_port_attr_req req = {
.attr = __cpu_to_le32(PRESTERA_CMD_PORT_ATTR_PHY_MODE),
.port = __cpu_to_le32(port->hw_id),
.dev = __cpu_to_le32(port->dev_id),
.param = {
.link = {
.phy = {
.admin = admin,
.adv_enable = adv ? 1 : 0,
.mode = __cpu_to_le32(mode),
.modes = __cpu_to_le64(modes),
}
}
}
};
req.param.link.phy.mdix = prestera_hw_mdix_from_eth(mdix);
return prestera_cmd(port->sw, PRESTERA_CMD_TYPE_PORT_ATTR_SET,
&req.cmd, sizeof(req));
}
net: marvell: prestera: Add driver for Prestera family ASIC devices Marvell Prestera 98DX326x integrates up to 24 ports of 1GbE with 8 ports of 10GbE uplinks or 2 ports of 40Gbps stacking for a largely wireless SMB deployment. The current implementation supports only boards designed for the Marvell Switchdev solution and requires special firmware. The core Prestera switching logic is implemented in prestera_main.c, there is an intermediate hw layer between core logic and firmware. It is implemented in prestera_hw.c, the purpose of it is to encapsulate hw related logic, in future there is a plan to support more devices with different HW related configurations. This patch contains only basic switch initialization and RX/TX support over SDMA mechanism. Currently supported devices have DMA access range <= 32bit and require ZONE_DMA to be enabled, for such cases SDMA driver checks if the skb allocated in proper range supported by the Prestera device. Also meanwhile there is no TX interrupt support in current firmware version so recycling work is scheduled on each xmit. Port's mac address is generated from the switch base mac which may be provided via device-tree (static one or as nvme cell), or randomly generated. This is required by the firmware. Co-developed-by: Andrii Savka <andrii.savka@plvision.eu> Signed-off-by: Andrii Savka <andrii.savka@plvision.eu> Co-developed-by: Oleksandr Mazur <oleksandr.mazur@plvision.eu> Signed-off-by: Oleksandr Mazur <oleksandr.mazur@plvision.eu> Co-developed-by: Serhiy Boiko <serhiy.boiko@plvision.eu> Signed-off-by: Serhiy Boiko <serhiy.boiko@plvision.eu> Co-developed-by: Serhiy Pshyk <serhiy.pshyk@plvision.eu> Signed-off-by: Serhiy Pshyk <serhiy.pshyk@plvision.eu> Co-developed-by: Taras Chornyi <taras.chornyi@plvision.eu> Signed-off-by: Taras Chornyi <taras.chornyi@plvision.eu> Co-developed-by: Volodymyr Mytnyk <volodymyr.mytnyk@plvision.eu> Signed-off-by: Volodymyr Mytnyk <volodymyr.mytnyk@plvision.eu> Signed-off-by: Vadym Kochan <vadym.kochan@plvision.eu> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-17 00:30:57 +08:00
int prestera_hw_port_mtu_set(const struct prestera_port *port, u32 mtu)
{
struct prestera_msg_port_attr_req req = {
net: marvell: prestera: add firmware v4.0 support Add firmware (FW) version 4.0 support for Marvell Prestera driver. Major changes have been made to new v4.0 FW ABI to add support of new features, introduce the stability of the FW ABI and ensure better forward compatibility for the future driver vesrions. Current v4.0 FW feature set support does not expect any changes to ABI, as it was defined and tested through long period of time. The ABI may be extended in case of new features, but it will not break the backward compatibility. ABI major changes done in v4.0: - L1 ABI, where MAC and PHY API configuration are split. - ACL has been split to low-level TCAM and Counters ABI to provide more HW ACL capabilities for future driver versions. To support backward support, the addition compatibility layer is required in the driver which will have two different codebase under "if FW-VER elif FW-VER else" conditions that will be removed in the future anyway, So, the idea was to break backward support and focus on more stable FW instead of supporting old version with very minimal and limited set of features/capabilities. Improve FW msg validation: * Use __le64, __le32, __le16 types in msg to/from FW to catch endian mismatch by sparse. * Use BUILD_BUG_ON for structures sent/recv to/from FW. Co-developed-by: Vadym Kochan <vkochan@marvell.com> Signed-off-by: Vadym Kochan <vkochan@marvell.com> Signed-off-by: Yevhen Orlov <yevhen.orlov@plvision.eu> Signed-off-by: Taras Chornyi <tchornyi@marvell.com> Signed-off-by: Volodymyr Mytnyk <vmytnyk@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-29 13:38:07 +08:00
.attr = __cpu_to_le32(PRESTERA_CMD_PORT_ATTR_MTU),
.port = __cpu_to_le32(port->hw_id),
.dev = __cpu_to_le32(port->dev_id),
net: marvell: prestera: Add driver for Prestera family ASIC devices Marvell Prestera 98DX326x integrates up to 24 ports of 1GbE with 8 ports of 10GbE uplinks or 2 ports of 40Gbps stacking for a largely wireless SMB deployment. The current implementation supports only boards designed for the Marvell Switchdev solution and requires special firmware. The core Prestera switching logic is implemented in prestera_main.c, there is an intermediate hw layer between core logic and firmware. It is implemented in prestera_hw.c, the purpose of it is to encapsulate hw related logic, in future there is a plan to support more devices with different HW related configurations. This patch contains only basic switch initialization and RX/TX support over SDMA mechanism. Currently supported devices have DMA access range <= 32bit and require ZONE_DMA to be enabled, for such cases SDMA driver checks if the skb allocated in proper range supported by the Prestera device. Also meanwhile there is no TX interrupt support in current firmware version so recycling work is scheduled on each xmit. Port's mac address is generated from the switch base mac which may be provided via device-tree (static one or as nvme cell), or randomly generated. This is required by the firmware. Co-developed-by: Andrii Savka <andrii.savka@plvision.eu> Signed-off-by: Andrii Savka <andrii.savka@plvision.eu> Co-developed-by: Oleksandr Mazur <oleksandr.mazur@plvision.eu> Signed-off-by: Oleksandr Mazur <oleksandr.mazur@plvision.eu> Co-developed-by: Serhiy Boiko <serhiy.boiko@plvision.eu> Signed-off-by: Serhiy Boiko <serhiy.boiko@plvision.eu> Co-developed-by: Serhiy Pshyk <serhiy.pshyk@plvision.eu> Signed-off-by: Serhiy Pshyk <serhiy.pshyk@plvision.eu> Co-developed-by: Taras Chornyi <taras.chornyi@plvision.eu> Signed-off-by: Taras Chornyi <taras.chornyi@plvision.eu> Co-developed-by: Volodymyr Mytnyk <volodymyr.mytnyk@plvision.eu> Signed-off-by: Volodymyr Mytnyk <volodymyr.mytnyk@plvision.eu> Signed-off-by: Vadym Kochan <vadym.kochan@plvision.eu> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-17 00:30:57 +08:00
.param = {
net: marvell: prestera: add firmware v4.0 support Add firmware (FW) version 4.0 support for Marvell Prestera driver. Major changes have been made to new v4.0 FW ABI to add support of new features, introduce the stability of the FW ABI and ensure better forward compatibility for the future driver vesrions. Current v4.0 FW feature set support does not expect any changes to ABI, as it was defined and tested through long period of time. The ABI may be extended in case of new features, but it will not break the backward compatibility. ABI major changes done in v4.0: - L1 ABI, where MAC and PHY API configuration are split. - ACL has been split to low-level TCAM and Counters ABI to provide more HW ACL capabilities for future driver versions. To support backward support, the addition compatibility layer is required in the driver which will have two different codebase under "if FW-VER elif FW-VER else" conditions that will be removed in the future anyway, So, the idea was to break backward support and focus on more stable FW instead of supporting old version with very minimal and limited set of features/capabilities. Improve FW msg validation: * Use __le64, __le32, __le16 types in msg to/from FW to catch endian mismatch by sparse. * Use BUILD_BUG_ON for structures sent/recv to/from FW. Co-developed-by: Vadym Kochan <vkochan@marvell.com> Signed-off-by: Vadym Kochan <vkochan@marvell.com> Signed-off-by: Yevhen Orlov <yevhen.orlov@plvision.eu> Signed-off-by: Taras Chornyi <tchornyi@marvell.com> Signed-off-by: Volodymyr Mytnyk <vmytnyk@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-29 13:38:07 +08:00
.mtu = __cpu_to_le32(mtu),
net: marvell: prestera: Add driver for Prestera family ASIC devices Marvell Prestera 98DX326x integrates up to 24 ports of 1GbE with 8 ports of 10GbE uplinks or 2 ports of 40Gbps stacking for a largely wireless SMB deployment. The current implementation supports only boards designed for the Marvell Switchdev solution and requires special firmware. The core Prestera switching logic is implemented in prestera_main.c, there is an intermediate hw layer between core logic and firmware. It is implemented in prestera_hw.c, the purpose of it is to encapsulate hw related logic, in future there is a plan to support more devices with different HW related configurations. This patch contains only basic switch initialization and RX/TX support over SDMA mechanism. Currently supported devices have DMA access range <= 32bit and require ZONE_DMA to be enabled, for such cases SDMA driver checks if the skb allocated in proper range supported by the Prestera device. Also meanwhile there is no TX interrupt support in current firmware version so recycling work is scheduled on each xmit. Port's mac address is generated from the switch base mac which may be provided via device-tree (static one or as nvme cell), or randomly generated. This is required by the firmware. Co-developed-by: Andrii Savka <andrii.savka@plvision.eu> Signed-off-by: Andrii Savka <andrii.savka@plvision.eu> Co-developed-by: Oleksandr Mazur <oleksandr.mazur@plvision.eu> Signed-off-by: Oleksandr Mazur <oleksandr.mazur@plvision.eu> Co-developed-by: Serhiy Boiko <serhiy.boiko@plvision.eu> Signed-off-by: Serhiy Boiko <serhiy.boiko@plvision.eu> Co-developed-by: Serhiy Pshyk <serhiy.pshyk@plvision.eu> Signed-off-by: Serhiy Pshyk <serhiy.pshyk@plvision.eu> Co-developed-by: Taras Chornyi <taras.chornyi@plvision.eu> Signed-off-by: Taras Chornyi <taras.chornyi@plvision.eu> Co-developed-by: Volodymyr Mytnyk <volodymyr.mytnyk@plvision.eu> Signed-off-by: Volodymyr Mytnyk <volodymyr.mytnyk@plvision.eu> Signed-off-by: Vadym Kochan <vadym.kochan@plvision.eu> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-17 00:30:57 +08:00
}
};
return prestera_cmd(port->sw, PRESTERA_CMD_TYPE_PORT_ATTR_SET,
&req.cmd, sizeof(req));
}
int prestera_hw_port_mac_set(const struct prestera_port *port, const char *mac)
{
struct prestera_msg_port_attr_req req = {
net: marvell: prestera: add firmware v4.0 support Add firmware (FW) version 4.0 support for Marvell Prestera driver. Major changes have been made to new v4.0 FW ABI to add support of new features, introduce the stability of the FW ABI and ensure better forward compatibility for the future driver vesrions. Current v4.0 FW feature set support does not expect any changes to ABI, as it was defined and tested through long period of time. The ABI may be extended in case of new features, but it will not break the backward compatibility. ABI major changes done in v4.0: - L1 ABI, where MAC and PHY API configuration are split. - ACL has been split to low-level TCAM and Counters ABI to provide more HW ACL capabilities for future driver versions. To support backward support, the addition compatibility layer is required in the driver which will have two different codebase under "if FW-VER elif FW-VER else" conditions that will be removed in the future anyway, So, the idea was to break backward support and focus on more stable FW instead of supporting old version with very minimal and limited set of features/capabilities. Improve FW msg validation: * Use __le64, __le32, __le16 types in msg to/from FW to catch endian mismatch by sparse. * Use BUILD_BUG_ON for structures sent/recv to/from FW. Co-developed-by: Vadym Kochan <vkochan@marvell.com> Signed-off-by: Vadym Kochan <vkochan@marvell.com> Signed-off-by: Yevhen Orlov <yevhen.orlov@plvision.eu> Signed-off-by: Taras Chornyi <tchornyi@marvell.com> Signed-off-by: Volodymyr Mytnyk <vmytnyk@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-29 13:38:07 +08:00
.attr = __cpu_to_le32(PRESTERA_CMD_PORT_ATTR_MAC),
.port = __cpu_to_le32(port->hw_id),
.dev = __cpu_to_le32(port->dev_id),
net: marvell: prestera: Add driver for Prestera family ASIC devices Marvell Prestera 98DX326x integrates up to 24 ports of 1GbE with 8 ports of 10GbE uplinks or 2 ports of 40Gbps stacking for a largely wireless SMB deployment. The current implementation supports only boards designed for the Marvell Switchdev solution and requires special firmware. The core Prestera switching logic is implemented in prestera_main.c, there is an intermediate hw layer between core logic and firmware. It is implemented in prestera_hw.c, the purpose of it is to encapsulate hw related logic, in future there is a plan to support more devices with different HW related configurations. This patch contains only basic switch initialization and RX/TX support over SDMA mechanism. Currently supported devices have DMA access range <= 32bit and require ZONE_DMA to be enabled, for such cases SDMA driver checks if the skb allocated in proper range supported by the Prestera device. Also meanwhile there is no TX interrupt support in current firmware version so recycling work is scheduled on each xmit. Port's mac address is generated from the switch base mac which may be provided via device-tree (static one or as nvme cell), or randomly generated. This is required by the firmware. Co-developed-by: Andrii Savka <andrii.savka@plvision.eu> Signed-off-by: Andrii Savka <andrii.savka@plvision.eu> Co-developed-by: Oleksandr Mazur <oleksandr.mazur@plvision.eu> Signed-off-by: Oleksandr Mazur <oleksandr.mazur@plvision.eu> Co-developed-by: Serhiy Boiko <serhiy.boiko@plvision.eu> Signed-off-by: Serhiy Boiko <serhiy.boiko@plvision.eu> Co-developed-by: Serhiy Pshyk <serhiy.pshyk@plvision.eu> Signed-off-by: Serhiy Pshyk <serhiy.pshyk@plvision.eu> Co-developed-by: Taras Chornyi <taras.chornyi@plvision.eu> Signed-off-by: Taras Chornyi <taras.chornyi@plvision.eu> Co-developed-by: Volodymyr Mytnyk <volodymyr.mytnyk@plvision.eu> Signed-off-by: Volodymyr Mytnyk <volodymyr.mytnyk@plvision.eu> Signed-off-by: Vadym Kochan <vadym.kochan@plvision.eu> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-17 00:30:57 +08:00
};
ether_addr_copy(req.param.mac, mac);
return prestera_cmd(port->sw, PRESTERA_CMD_TYPE_PORT_ATTR_SET,
&req.cmd, sizeof(req));
}
int prestera_hw_port_accept_frm_type(struct prestera_port *port,
enum prestera_accept_frm_type type)
{
struct prestera_msg_port_attr_req req = {
net: marvell: prestera: add firmware v4.0 support Add firmware (FW) version 4.0 support for Marvell Prestera driver. Major changes have been made to new v4.0 FW ABI to add support of new features, introduce the stability of the FW ABI and ensure better forward compatibility for the future driver vesrions. Current v4.0 FW feature set support does not expect any changes to ABI, as it was defined and tested through long period of time. The ABI may be extended in case of new features, but it will not break the backward compatibility. ABI major changes done in v4.0: - L1 ABI, where MAC and PHY API configuration are split. - ACL has been split to low-level TCAM and Counters ABI to provide more HW ACL capabilities for future driver versions. To support backward support, the addition compatibility layer is required in the driver which will have two different codebase under "if FW-VER elif FW-VER else" conditions that will be removed in the future anyway, So, the idea was to break backward support and focus on more stable FW instead of supporting old version with very minimal and limited set of features/capabilities. Improve FW msg validation: * Use __le64, __le32, __le16 types in msg to/from FW to catch endian mismatch by sparse. * Use BUILD_BUG_ON for structures sent/recv to/from FW. Co-developed-by: Vadym Kochan <vkochan@marvell.com> Signed-off-by: Vadym Kochan <vkochan@marvell.com> Signed-off-by: Yevhen Orlov <yevhen.orlov@plvision.eu> Signed-off-by: Taras Chornyi <tchornyi@marvell.com> Signed-off-by: Volodymyr Mytnyk <vmytnyk@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-29 13:38:07 +08:00
.attr = __cpu_to_le32(PRESTERA_CMD_PORT_ATTR_ACCEPT_FRAME_TYPE),
.port = __cpu_to_le32(port->hw_id),
.dev = __cpu_to_le32(port->dev_id),
.param = {
.accept_frm_type = type,
}
};
return prestera_cmd(port->sw, PRESTERA_CMD_TYPE_PORT_ATTR_SET,
&req.cmd, sizeof(req));
}
net: marvell: prestera: Add driver for Prestera family ASIC devices Marvell Prestera 98DX326x integrates up to 24 ports of 1GbE with 8 ports of 10GbE uplinks or 2 ports of 40Gbps stacking for a largely wireless SMB deployment. The current implementation supports only boards designed for the Marvell Switchdev solution and requires special firmware. The core Prestera switching logic is implemented in prestera_main.c, there is an intermediate hw layer between core logic and firmware. It is implemented in prestera_hw.c, the purpose of it is to encapsulate hw related logic, in future there is a plan to support more devices with different HW related configurations. This patch contains only basic switch initialization and RX/TX support over SDMA mechanism. Currently supported devices have DMA access range <= 32bit and require ZONE_DMA to be enabled, for such cases SDMA driver checks if the skb allocated in proper range supported by the Prestera device. Also meanwhile there is no TX interrupt support in current firmware version so recycling work is scheduled on each xmit. Port's mac address is generated from the switch base mac which may be provided via device-tree (static one or as nvme cell), or randomly generated. This is required by the firmware. Co-developed-by: Andrii Savka <andrii.savka@plvision.eu> Signed-off-by: Andrii Savka <andrii.savka@plvision.eu> Co-developed-by: Oleksandr Mazur <oleksandr.mazur@plvision.eu> Signed-off-by: Oleksandr Mazur <oleksandr.mazur@plvision.eu> Co-developed-by: Serhiy Boiko <serhiy.boiko@plvision.eu> Signed-off-by: Serhiy Boiko <serhiy.boiko@plvision.eu> Co-developed-by: Serhiy Pshyk <serhiy.pshyk@plvision.eu> Signed-off-by: Serhiy Pshyk <serhiy.pshyk@plvision.eu> Co-developed-by: Taras Chornyi <taras.chornyi@plvision.eu> Signed-off-by: Taras Chornyi <taras.chornyi@plvision.eu> Co-developed-by: Volodymyr Mytnyk <volodymyr.mytnyk@plvision.eu> Signed-off-by: Volodymyr Mytnyk <volodymyr.mytnyk@plvision.eu> Signed-off-by: Vadym Kochan <vadym.kochan@plvision.eu> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-17 00:30:57 +08:00
int prestera_hw_port_cap_get(const struct prestera_port *port,
struct prestera_port_caps *caps)
{
struct prestera_msg_port_attr_req req = {
net: marvell: prestera: add firmware v4.0 support Add firmware (FW) version 4.0 support for Marvell Prestera driver. Major changes have been made to new v4.0 FW ABI to add support of new features, introduce the stability of the FW ABI and ensure better forward compatibility for the future driver vesrions. Current v4.0 FW feature set support does not expect any changes to ABI, as it was defined and tested through long period of time. The ABI may be extended in case of new features, but it will not break the backward compatibility. ABI major changes done in v4.0: - L1 ABI, where MAC and PHY API configuration are split. - ACL has been split to low-level TCAM and Counters ABI to provide more HW ACL capabilities for future driver versions. To support backward support, the addition compatibility layer is required in the driver which will have two different codebase under "if FW-VER elif FW-VER else" conditions that will be removed in the future anyway, So, the idea was to break backward support and focus on more stable FW instead of supporting old version with very minimal and limited set of features/capabilities. Improve FW msg validation: * Use __le64, __le32, __le16 types in msg to/from FW to catch endian mismatch by sparse. * Use BUILD_BUG_ON for structures sent/recv to/from FW. Co-developed-by: Vadym Kochan <vkochan@marvell.com> Signed-off-by: Vadym Kochan <vkochan@marvell.com> Signed-off-by: Yevhen Orlov <yevhen.orlov@plvision.eu> Signed-off-by: Taras Chornyi <tchornyi@marvell.com> Signed-off-by: Volodymyr Mytnyk <vmytnyk@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-29 13:38:07 +08:00
.attr = __cpu_to_le32(PRESTERA_CMD_PORT_ATTR_CAPABILITY),
.port = __cpu_to_le32(port->hw_id),
.dev = __cpu_to_le32(port->dev_id),
net: marvell: prestera: Add driver for Prestera family ASIC devices Marvell Prestera 98DX326x integrates up to 24 ports of 1GbE with 8 ports of 10GbE uplinks or 2 ports of 40Gbps stacking for a largely wireless SMB deployment. The current implementation supports only boards designed for the Marvell Switchdev solution and requires special firmware. The core Prestera switching logic is implemented in prestera_main.c, there is an intermediate hw layer between core logic and firmware. It is implemented in prestera_hw.c, the purpose of it is to encapsulate hw related logic, in future there is a plan to support more devices with different HW related configurations. This patch contains only basic switch initialization and RX/TX support over SDMA mechanism. Currently supported devices have DMA access range <= 32bit and require ZONE_DMA to be enabled, for such cases SDMA driver checks if the skb allocated in proper range supported by the Prestera device. Also meanwhile there is no TX interrupt support in current firmware version so recycling work is scheduled on each xmit. Port's mac address is generated from the switch base mac which may be provided via device-tree (static one or as nvme cell), or randomly generated. This is required by the firmware. Co-developed-by: Andrii Savka <andrii.savka@plvision.eu> Signed-off-by: Andrii Savka <andrii.savka@plvision.eu> Co-developed-by: Oleksandr Mazur <oleksandr.mazur@plvision.eu> Signed-off-by: Oleksandr Mazur <oleksandr.mazur@plvision.eu> Co-developed-by: Serhiy Boiko <serhiy.boiko@plvision.eu> Signed-off-by: Serhiy Boiko <serhiy.boiko@plvision.eu> Co-developed-by: Serhiy Pshyk <serhiy.pshyk@plvision.eu> Signed-off-by: Serhiy Pshyk <serhiy.pshyk@plvision.eu> Co-developed-by: Taras Chornyi <taras.chornyi@plvision.eu> Signed-off-by: Taras Chornyi <taras.chornyi@plvision.eu> Co-developed-by: Volodymyr Mytnyk <volodymyr.mytnyk@plvision.eu> Signed-off-by: Volodymyr Mytnyk <volodymyr.mytnyk@plvision.eu> Signed-off-by: Vadym Kochan <vadym.kochan@plvision.eu> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-17 00:30:57 +08:00
};
struct prestera_msg_port_attr_resp resp;
int err;
err = prestera_cmd_ret(port->sw, PRESTERA_CMD_TYPE_PORT_ATTR_GET,
&req.cmd, sizeof(req), &resp.ret, sizeof(resp));
if (err)
return err;
net: marvell: prestera: add firmware v4.0 support Add firmware (FW) version 4.0 support for Marvell Prestera driver. Major changes have been made to new v4.0 FW ABI to add support of new features, introduce the stability of the FW ABI and ensure better forward compatibility for the future driver vesrions. Current v4.0 FW feature set support does not expect any changes to ABI, as it was defined and tested through long period of time. The ABI may be extended in case of new features, but it will not break the backward compatibility. ABI major changes done in v4.0: - L1 ABI, where MAC and PHY API configuration are split. - ACL has been split to low-level TCAM and Counters ABI to provide more HW ACL capabilities for future driver versions. To support backward support, the addition compatibility layer is required in the driver which will have two different codebase under "if FW-VER elif FW-VER else" conditions that will be removed in the future anyway, So, the idea was to break backward support and focus on more stable FW instead of supporting old version with very minimal and limited set of features/capabilities. Improve FW msg validation: * Use __le64, __le32, __le16 types in msg to/from FW to catch endian mismatch by sparse. * Use BUILD_BUG_ON for structures sent/recv to/from FW. Co-developed-by: Vadym Kochan <vkochan@marvell.com> Signed-off-by: Vadym Kochan <vkochan@marvell.com> Signed-off-by: Yevhen Orlov <yevhen.orlov@plvision.eu> Signed-off-by: Taras Chornyi <tchornyi@marvell.com> Signed-off-by: Volodymyr Mytnyk <vmytnyk@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-29 13:38:07 +08:00
caps->supp_link_modes = __le64_to_cpu(resp.param.cap.link_mode);
net: marvell: prestera: Add driver for Prestera family ASIC devices Marvell Prestera 98DX326x integrates up to 24 ports of 1GbE with 8 ports of 10GbE uplinks or 2 ports of 40Gbps stacking for a largely wireless SMB deployment. The current implementation supports only boards designed for the Marvell Switchdev solution and requires special firmware. The core Prestera switching logic is implemented in prestera_main.c, there is an intermediate hw layer between core logic and firmware. It is implemented in prestera_hw.c, the purpose of it is to encapsulate hw related logic, in future there is a plan to support more devices with different HW related configurations. This patch contains only basic switch initialization and RX/TX support over SDMA mechanism. Currently supported devices have DMA access range <= 32bit and require ZONE_DMA to be enabled, for such cases SDMA driver checks if the skb allocated in proper range supported by the Prestera device. Also meanwhile there is no TX interrupt support in current firmware version so recycling work is scheduled on each xmit. Port's mac address is generated from the switch base mac which may be provided via device-tree (static one or as nvme cell), or randomly generated. This is required by the firmware. Co-developed-by: Andrii Savka <andrii.savka@plvision.eu> Signed-off-by: Andrii Savka <andrii.savka@plvision.eu> Co-developed-by: Oleksandr Mazur <oleksandr.mazur@plvision.eu> Signed-off-by: Oleksandr Mazur <oleksandr.mazur@plvision.eu> Co-developed-by: Serhiy Boiko <serhiy.boiko@plvision.eu> Signed-off-by: Serhiy Boiko <serhiy.boiko@plvision.eu> Co-developed-by: Serhiy Pshyk <serhiy.pshyk@plvision.eu> Signed-off-by: Serhiy Pshyk <serhiy.pshyk@plvision.eu> Co-developed-by: Taras Chornyi <taras.chornyi@plvision.eu> Signed-off-by: Taras Chornyi <taras.chornyi@plvision.eu> Co-developed-by: Volodymyr Mytnyk <volodymyr.mytnyk@plvision.eu> Signed-off-by: Volodymyr Mytnyk <volodymyr.mytnyk@plvision.eu> Signed-off-by: Vadym Kochan <vadym.kochan@plvision.eu> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-17 00:30:57 +08:00
caps->transceiver = resp.param.cap.transceiver;
caps->supp_fec = resp.param.cap.fec;
caps->type = resp.param.cap.type;
return err;
}
net: marvell: prestera: add firmware v4.0 support Add firmware (FW) version 4.0 support for Marvell Prestera driver. Major changes have been made to new v4.0 FW ABI to add support of new features, introduce the stability of the FW ABI and ensure better forward compatibility for the future driver vesrions. Current v4.0 FW feature set support does not expect any changes to ABI, as it was defined and tested through long period of time. The ABI may be extended in case of new features, but it will not break the backward compatibility. ABI major changes done in v4.0: - L1 ABI, where MAC and PHY API configuration are split. - ACL has been split to low-level TCAM and Counters ABI to provide more HW ACL capabilities for future driver versions. To support backward support, the addition compatibility layer is required in the driver which will have two different codebase under "if FW-VER elif FW-VER else" conditions that will be removed in the future anyway, So, the idea was to break backward support and focus on more stable FW instead of supporting old version with very minimal and limited set of features/capabilities. Improve FW msg validation: * Use __le64, __le32, __le16 types in msg to/from FW to catch endian mismatch by sparse. * Use BUILD_BUG_ON for structures sent/recv to/from FW. Co-developed-by: Vadym Kochan <vkochan@marvell.com> Signed-off-by: Vadym Kochan <vkochan@marvell.com> Signed-off-by: Yevhen Orlov <yevhen.orlov@plvision.eu> Signed-off-by: Taras Chornyi <tchornyi@marvell.com> Signed-off-by: Volodymyr Mytnyk <vmytnyk@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-29 13:38:07 +08:00
static void prestera_hw_remote_fc_to_eth(u8 fc, bool *pause, bool *asym_pause)
{
net: marvell: prestera: add firmware v4.0 support Add firmware (FW) version 4.0 support for Marvell Prestera driver. Major changes have been made to new v4.0 FW ABI to add support of new features, introduce the stability of the FW ABI and ensure better forward compatibility for the future driver vesrions. Current v4.0 FW feature set support does not expect any changes to ABI, as it was defined and tested through long period of time. The ABI may be extended in case of new features, but it will not break the backward compatibility. ABI major changes done in v4.0: - L1 ABI, where MAC and PHY API configuration are split. - ACL has been split to low-level TCAM and Counters ABI to provide more HW ACL capabilities for future driver versions. To support backward support, the addition compatibility layer is required in the driver which will have two different codebase under "if FW-VER elif FW-VER else" conditions that will be removed in the future anyway, So, the idea was to break backward support and focus on more stable FW instead of supporting old version with very minimal and limited set of features/capabilities. Improve FW msg validation: * Use __le64, __le32, __le16 types in msg to/from FW to catch endian mismatch by sparse. * Use BUILD_BUG_ON for structures sent/recv to/from FW. Co-developed-by: Vadym Kochan <vkochan@marvell.com> Signed-off-by: Vadym Kochan <vkochan@marvell.com> Signed-off-by: Yevhen Orlov <yevhen.orlov@plvision.eu> Signed-off-by: Taras Chornyi <tchornyi@marvell.com> Signed-off-by: Volodymyr Mytnyk <vmytnyk@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-29 13:38:07 +08:00
switch (fc) {
case PRESTERA_FC_SYMMETRIC:
*pause = true;
*asym_pause = false;
break;
case PRESTERA_FC_ASYMMETRIC:
*pause = false;
*asym_pause = true;
break;
case PRESTERA_FC_SYMM_ASYMM:
*pause = true;
*asym_pause = true;
break;
default:
*pause = false;
*asym_pause = false;
}
}
int prestera_hw_vtcam_create(struct prestera_switch *sw,
u8 lookup, const u32 *keymask, u32 *vtcam_id,
enum prestera_hw_vtcam_direction_t dir)
{
int err;
struct prestera_msg_vtcam_resp resp;
struct prestera_msg_vtcam_create_req req = {
.lookup = lookup,
.direction = dir,
};
if (keymask)
memcpy(req.keymask, keymask, sizeof(req.keymask));
else
memset(req.keymask, 0, sizeof(req.keymask));
err = prestera_cmd_ret(sw, PRESTERA_CMD_TYPE_VTCAM_CREATE,
&req.cmd, sizeof(req), &resp.ret, sizeof(resp));
if (err)
return err;
*vtcam_id = __le32_to_cpu(resp.vtcam_id);
return 0;
}
int prestera_hw_vtcam_destroy(struct prestera_switch *sw, u32 vtcam_id)
{
struct prestera_msg_vtcam_destroy_req req = {
.vtcam_id = __cpu_to_le32(vtcam_id),
};
return prestera_cmd(sw, PRESTERA_CMD_TYPE_VTCAM_DESTROY,
&req.cmd, sizeof(req));
}
static int
prestera_acl_rule_add_put_action(struct prestera_msg_acl_action *action,
struct prestera_acl_hw_action_info *info)
{
action->id = __cpu_to_le32(info->id);
switch (info->id) {
case PRESTERA_ACL_RULE_ACTION_ACCEPT:
case PRESTERA_ACL_RULE_ACTION_DROP:
case PRESTERA_ACL_RULE_ACTION_TRAP:
/* just rule action id, no specific data */
break;
case PRESTERA_ACL_RULE_ACTION_JUMP:
action->jump.index = __cpu_to_le32(info->jump.index);
break;
case PRESTERA_ACL_RULE_ACTION_COUNT:
action->count.id = __cpu_to_le32(info->count.id);
break;
default:
return -EINVAL;
}
return 0;
}
int prestera_hw_vtcam_rule_add(struct prestera_switch *sw,
u32 vtcam_id, u32 prio, void *key, void *keymask,
struct prestera_acl_hw_action_info *act,
u8 n_act, u32 *rule_id)
{
struct prestera_msg_acl_action *actions_msg;
struct prestera_msg_vtcam_rule_add_req *req;
struct prestera_msg_vtcam_resp resp;
void *buff;
u32 size;
int err;
u8 i;
size = sizeof(*req) + sizeof(*actions_msg) * n_act;
buff = kzalloc(size, GFP_KERNEL);
if (!buff)
return -ENOMEM;
req = buff;
req->n_act = __cpu_to_le32(n_act);
actions_msg = buff + sizeof(*req);
/* put acl matches into the message */
memcpy(req->key, key, sizeof(req->key));
memcpy(req->keymask, keymask, sizeof(req->keymask));
/* put acl actions into the message */
for (i = 0; i < n_act; i++) {
err = prestera_acl_rule_add_put_action(&actions_msg[i],
&act[i]);
if (err)
goto free_buff;
}
req->vtcam_id = __cpu_to_le32(vtcam_id);
req->prio = __cpu_to_le32(prio);
err = prestera_cmd_ret(sw, PRESTERA_CMD_TYPE_VTCAM_RULE_ADD,
&req->cmd, size, &resp.ret, sizeof(resp));
if (err)
goto free_buff;
*rule_id = __le32_to_cpu(resp.rule_id);
free_buff:
kfree(buff);
return err;
}
int prestera_hw_vtcam_rule_del(struct prestera_switch *sw,
u32 vtcam_id, u32 rule_id)
{
struct prestera_msg_vtcam_rule_del_req req = {
.vtcam_id = __cpu_to_le32(vtcam_id),
net: marvell: prestera: add firmware v4.0 support Add firmware (FW) version 4.0 support for Marvell Prestera driver. Major changes have been made to new v4.0 FW ABI to add support of new features, introduce the stability of the FW ABI and ensure better forward compatibility for the future driver vesrions. Current v4.0 FW feature set support does not expect any changes to ABI, as it was defined and tested through long period of time. The ABI may be extended in case of new features, but it will not break the backward compatibility. ABI major changes done in v4.0: - L1 ABI, where MAC and PHY API configuration are split. - ACL has been split to low-level TCAM and Counters ABI to provide more HW ACL capabilities for future driver versions. To support backward support, the addition compatibility layer is required in the driver which will have two different codebase under "if FW-VER elif FW-VER else" conditions that will be removed in the future anyway, So, the idea was to break backward support and focus on more stable FW instead of supporting old version with very minimal and limited set of features/capabilities. Improve FW msg validation: * Use __le64, __le32, __le16 types in msg to/from FW to catch endian mismatch by sparse. * Use BUILD_BUG_ON for structures sent/recv to/from FW. Co-developed-by: Vadym Kochan <vkochan@marvell.com> Signed-off-by: Vadym Kochan <vkochan@marvell.com> Signed-off-by: Yevhen Orlov <yevhen.orlov@plvision.eu> Signed-off-by: Taras Chornyi <tchornyi@marvell.com> Signed-off-by: Volodymyr Mytnyk <vmytnyk@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-29 13:38:07 +08:00
.id = __cpu_to_le32(rule_id)
};
return prestera_cmd(sw, PRESTERA_CMD_TYPE_VTCAM_RULE_DELETE,
&req.cmd, sizeof(req));
}
int prestera_hw_vtcam_iface_bind(struct prestera_switch *sw,
struct prestera_acl_iface *iface,
u32 vtcam_id, u16 pcl_id)
{
struct prestera_msg_vtcam_bind_req req = {
.vtcam_id = __cpu_to_le32(vtcam_id),
.type = __cpu_to_le16(iface->type),
.pcl_id = __cpu_to_le16(pcl_id)
};
if (iface->type == PRESTERA_ACL_IFACE_TYPE_PORT) {
req.port.dev_id = __cpu_to_le32(iface->port->dev_id);
req.port.hw_id = __cpu_to_le32(iface->port->hw_id);
} else {
req.index = __cpu_to_le32(iface->index);
}
return prestera_cmd(sw, PRESTERA_CMD_TYPE_VTCAM_IFACE_BIND,
&req.cmd, sizeof(req));
}
int prestera_hw_vtcam_iface_unbind(struct prestera_switch *sw,
struct prestera_acl_iface *iface,
u32 vtcam_id)
{
struct prestera_msg_vtcam_bind_req req = {
.vtcam_id = __cpu_to_le32(vtcam_id),
.type = __cpu_to_le16(iface->type)
};
if (iface->type == PRESTERA_ACL_IFACE_TYPE_PORT) {
req.port.dev_id = __cpu_to_le32(iface->port->dev_id);
req.port.hw_id = __cpu_to_le32(iface->port->hw_id);
} else {
req.index = __cpu_to_le32(iface->index);
}
return prestera_cmd(sw, PRESTERA_CMD_TYPE_VTCAM_IFACE_UNBIND,
&req.cmd, sizeof(req));
}
int prestera_hw_span_get(const struct prestera_port *port, u8 *span_id)
{
struct prestera_msg_span_resp resp;
struct prestera_msg_span_req req = {
net: marvell: prestera: add firmware v4.0 support Add firmware (FW) version 4.0 support for Marvell Prestera driver. Major changes have been made to new v4.0 FW ABI to add support of new features, introduce the stability of the FW ABI and ensure better forward compatibility for the future driver vesrions. Current v4.0 FW feature set support does not expect any changes to ABI, as it was defined and tested through long period of time. The ABI may be extended in case of new features, but it will not break the backward compatibility. ABI major changes done in v4.0: - L1 ABI, where MAC and PHY API configuration are split. - ACL has been split to low-level TCAM and Counters ABI to provide more HW ACL capabilities for future driver versions. To support backward support, the addition compatibility layer is required in the driver which will have two different codebase under "if FW-VER elif FW-VER else" conditions that will be removed in the future anyway, So, the idea was to break backward support and focus on more stable FW instead of supporting old version with very minimal and limited set of features/capabilities. Improve FW msg validation: * Use __le64, __le32, __le16 types in msg to/from FW to catch endian mismatch by sparse. * Use BUILD_BUG_ON for structures sent/recv to/from FW. Co-developed-by: Vadym Kochan <vkochan@marvell.com> Signed-off-by: Vadym Kochan <vkochan@marvell.com> Signed-off-by: Yevhen Orlov <yevhen.orlov@plvision.eu> Signed-off-by: Taras Chornyi <tchornyi@marvell.com> Signed-off-by: Volodymyr Mytnyk <vmytnyk@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-29 13:38:07 +08:00
.port = __cpu_to_le32(port->hw_id),
.dev = __cpu_to_le32(port->dev_id),
};
int err;
err = prestera_cmd_ret(port->sw, PRESTERA_CMD_TYPE_SPAN_GET,
&req.cmd, sizeof(req), &resp.ret, sizeof(resp));
if (err)
return err;
*span_id = resp.id;
return 0;
}
int prestera_hw_span_bind(const struct prestera_port *port, u8 span_id)
{
struct prestera_msg_span_req req = {
net: marvell: prestera: add firmware v4.0 support Add firmware (FW) version 4.0 support for Marvell Prestera driver. Major changes have been made to new v4.0 FW ABI to add support of new features, introduce the stability of the FW ABI and ensure better forward compatibility for the future driver vesrions. Current v4.0 FW feature set support does not expect any changes to ABI, as it was defined and tested through long period of time. The ABI may be extended in case of new features, but it will not break the backward compatibility. ABI major changes done in v4.0: - L1 ABI, where MAC and PHY API configuration are split. - ACL has been split to low-level TCAM and Counters ABI to provide more HW ACL capabilities for future driver versions. To support backward support, the addition compatibility layer is required in the driver which will have two different codebase under "if FW-VER elif FW-VER else" conditions that will be removed in the future anyway, So, the idea was to break backward support and focus on more stable FW instead of supporting old version with very minimal and limited set of features/capabilities. Improve FW msg validation: * Use __le64, __le32, __le16 types in msg to/from FW to catch endian mismatch by sparse. * Use BUILD_BUG_ON for structures sent/recv to/from FW. Co-developed-by: Vadym Kochan <vkochan@marvell.com> Signed-off-by: Vadym Kochan <vkochan@marvell.com> Signed-off-by: Yevhen Orlov <yevhen.orlov@plvision.eu> Signed-off-by: Taras Chornyi <tchornyi@marvell.com> Signed-off-by: Volodymyr Mytnyk <vmytnyk@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-29 13:38:07 +08:00
.port = __cpu_to_le32(port->hw_id),
.dev = __cpu_to_le32(port->dev_id),
.id = span_id,
};
return prestera_cmd(port->sw, PRESTERA_CMD_TYPE_SPAN_BIND,
&req.cmd, sizeof(req));
}
int prestera_hw_span_unbind(const struct prestera_port *port)
{
struct prestera_msg_span_req req = {
net: marvell: prestera: add firmware v4.0 support Add firmware (FW) version 4.0 support for Marvell Prestera driver. Major changes have been made to new v4.0 FW ABI to add support of new features, introduce the stability of the FW ABI and ensure better forward compatibility for the future driver vesrions. Current v4.0 FW feature set support does not expect any changes to ABI, as it was defined and tested through long period of time. The ABI may be extended in case of new features, but it will not break the backward compatibility. ABI major changes done in v4.0: - L1 ABI, where MAC and PHY API configuration are split. - ACL has been split to low-level TCAM and Counters ABI to provide more HW ACL capabilities for future driver versions. To support backward support, the addition compatibility layer is required in the driver which will have two different codebase under "if FW-VER elif FW-VER else" conditions that will be removed in the future anyway, So, the idea was to break backward support and focus on more stable FW instead of supporting old version with very minimal and limited set of features/capabilities. Improve FW msg validation: * Use __le64, __le32, __le16 types in msg to/from FW to catch endian mismatch by sparse. * Use BUILD_BUG_ON for structures sent/recv to/from FW. Co-developed-by: Vadym Kochan <vkochan@marvell.com> Signed-off-by: Vadym Kochan <vkochan@marvell.com> Signed-off-by: Yevhen Orlov <yevhen.orlov@plvision.eu> Signed-off-by: Taras Chornyi <tchornyi@marvell.com> Signed-off-by: Volodymyr Mytnyk <vmytnyk@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-29 13:38:07 +08:00
.port = __cpu_to_le32(port->hw_id),
.dev = __cpu_to_le32(port->dev_id),
};
return prestera_cmd(port->sw, PRESTERA_CMD_TYPE_SPAN_UNBIND,
&req.cmd, sizeof(req));
}
int prestera_hw_span_release(struct prestera_switch *sw, u8 span_id)
{
struct prestera_msg_span_req req = {
.id = span_id
};
return prestera_cmd(sw, PRESTERA_CMD_TYPE_SPAN_RELEASE,
&req.cmd, sizeof(req));
}
int prestera_hw_port_type_get(const struct prestera_port *port, u8 *type)
{
struct prestera_msg_port_attr_req req = {
net: marvell: prestera: add firmware v4.0 support Add firmware (FW) version 4.0 support for Marvell Prestera driver. Major changes have been made to new v4.0 FW ABI to add support of new features, introduce the stability of the FW ABI and ensure better forward compatibility for the future driver vesrions. Current v4.0 FW feature set support does not expect any changes to ABI, as it was defined and tested through long period of time. The ABI may be extended in case of new features, but it will not break the backward compatibility. ABI major changes done in v4.0: - L1 ABI, where MAC and PHY API configuration are split. - ACL has been split to low-level TCAM and Counters ABI to provide more HW ACL capabilities for future driver versions. To support backward support, the addition compatibility layer is required in the driver which will have two different codebase under "if FW-VER elif FW-VER else" conditions that will be removed in the future anyway, So, the idea was to break backward support and focus on more stable FW instead of supporting old version with very minimal and limited set of features/capabilities. Improve FW msg validation: * Use __le64, __le32, __le16 types in msg to/from FW to catch endian mismatch by sparse. * Use BUILD_BUG_ON for structures sent/recv to/from FW. Co-developed-by: Vadym Kochan <vkochan@marvell.com> Signed-off-by: Vadym Kochan <vkochan@marvell.com> Signed-off-by: Yevhen Orlov <yevhen.orlov@plvision.eu> Signed-off-by: Taras Chornyi <tchornyi@marvell.com> Signed-off-by: Volodymyr Mytnyk <vmytnyk@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-29 13:38:07 +08:00
.attr = __cpu_to_le32(PRESTERA_CMD_PORT_ATTR_TYPE),
.port = __cpu_to_le32(port->hw_id),
.dev = __cpu_to_le32(port->dev_id),
};
struct prestera_msg_port_attr_resp resp;
int err;
err = prestera_cmd_ret(port->sw, PRESTERA_CMD_TYPE_PORT_ATTR_GET,
&req.cmd, sizeof(req), &resp.ret, sizeof(resp));
if (err)
return err;
*type = resp.param.type;
return 0;
}
int prestera_hw_port_speed_get(const struct prestera_port *port, u32 *speed)
{
struct prestera_msg_port_attr_req req = {
net: marvell: prestera: add firmware v4.0 support Add firmware (FW) version 4.0 support for Marvell Prestera driver. Major changes have been made to new v4.0 FW ABI to add support of new features, introduce the stability of the FW ABI and ensure better forward compatibility for the future driver vesrions. Current v4.0 FW feature set support does not expect any changes to ABI, as it was defined and tested through long period of time. The ABI may be extended in case of new features, but it will not break the backward compatibility. ABI major changes done in v4.0: - L1 ABI, where MAC and PHY API configuration are split. - ACL has been split to low-level TCAM and Counters ABI to provide more HW ACL capabilities for future driver versions. To support backward support, the addition compatibility layer is required in the driver which will have two different codebase under "if FW-VER elif FW-VER else" conditions that will be removed in the future anyway, So, the idea was to break backward support and focus on more stable FW instead of supporting old version with very minimal and limited set of features/capabilities. Improve FW msg validation: * Use __le64, __le32, __le16 types in msg to/from FW to catch endian mismatch by sparse. * Use BUILD_BUG_ON for structures sent/recv to/from FW. Co-developed-by: Vadym Kochan <vkochan@marvell.com> Signed-off-by: Vadym Kochan <vkochan@marvell.com> Signed-off-by: Yevhen Orlov <yevhen.orlov@plvision.eu> Signed-off-by: Taras Chornyi <tchornyi@marvell.com> Signed-off-by: Volodymyr Mytnyk <vmytnyk@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-29 13:38:07 +08:00
.attr = __cpu_to_le32(PRESTERA_CMD_PORT_ATTR_SPEED),
.port = __cpu_to_le32(port->hw_id),
.dev = __cpu_to_le32(port->dev_id),
};
struct prestera_msg_port_attr_resp resp;
int err;
err = prestera_cmd_ret(port->sw, PRESTERA_CMD_TYPE_PORT_ATTR_GET,
&req.cmd, sizeof(req), &resp.ret, sizeof(resp));
if (err)
return err;
net: marvell: prestera: add firmware v4.0 support Add firmware (FW) version 4.0 support for Marvell Prestera driver. Major changes have been made to new v4.0 FW ABI to add support of new features, introduce the stability of the FW ABI and ensure better forward compatibility for the future driver vesrions. Current v4.0 FW feature set support does not expect any changes to ABI, as it was defined and tested through long period of time. The ABI may be extended in case of new features, but it will not break the backward compatibility. ABI major changes done in v4.0: - L1 ABI, where MAC and PHY API configuration are split. - ACL has been split to low-level TCAM and Counters ABI to provide more HW ACL capabilities for future driver versions. To support backward support, the addition compatibility layer is required in the driver which will have two different codebase under "if FW-VER elif FW-VER else" conditions that will be removed in the future anyway, So, the idea was to break backward support and focus on more stable FW instead of supporting old version with very minimal and limited set of features/capabilities. Improve FW msg validation: * Use __le64, __le32, __le16 types in msg to/from FW to catch endian mismatch by sparse. * Use BUILD_BUG_ON for structures sent/recv to/from FW. Co-developed-by: Vadym Kochan <vkochan@marvell.com> Signed-off-by: Vadym Kochan <vkochan@marvell.com> Signed-off-by: Yevhen Orlov <yevhen.orlov@plvision.eu> Signed-off-by: Taras Chornyi <tchornyi@marvell.com> Signed-off-by: Volodymyr Mytnyk <vmytnyk@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-29 13:38:07 +08:00
*speed = __le32_to_cpu(resp.param.speed);
return 0;
}
int prestera_hw_port_autoneg_restart(struct prestera_port *port)
{
struct prestera_msg_port_attr_req req = {
.attr =
__cpu_to_le32(PRESTERA_CMD_PORT_ATTR_PHY_AUTONEG_RESTART),
net: marvell: prestera: add firmware v4.0 support Add firmware (FW) version 4.0 support for Marvell Prestera driver. Major changes have been made to new v4.0 FW ABI to add support of new features, introduce the stability of the FW ABI and ensure better forward compatibility for the future driver vesrions. Current v4.0 FW feature set support does not expect any changes to ABI, as it was defined and tested through long period of time. The ABI may be extended in case of new features, but it will not break the backward compatibility. ABI major changes done in v4.0: - L1 ABI, where MAC and PHY API configuration are split. - ACL has been split to low-level TCAM and Counters ABI to provide more HW ACL capabilities for future driver versions. To support backward support, the addition compatibility layer is required in the driver which will have two different codebase under "if FW-VER elif FW-VER else" conditions that will be removed in the future anyway, So, the idea was to break backward support and focus on more stable FW instead of supporting old version with very minimal and limited set of features/capabilities. Improve FW msg validation: * Use __le64, __le32, __le16 types in msg to/from FW to catch endian mismatch by sparse. * Use BUILD_BUG_ON for structures sent/recv to/from FW. Co-developed-by: Vadym Kochan <vkochan@marvell.com> Signed-off-by: Vadym Kochan <vkochan@marvell.com> Signed-off-by: Yevhen Orlov <yevhen.orlov@plvision.eu> Signed-off-by: Taras Chornyi <tchornyi@marvell.com> Signed-off-by: Volodymyr Mytnyk <vmytnyk@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-29 13:38:07 +08:00
.port = __cpu_to_le32(port->hw_id),
.dev = __cpu_to_le32(port->dev_id),
};
return prestera_cmd(port->sw, PRESTERA_CMD_TYPE_PORT_ATTR_SET,
&req.cmd, sizeof(req));
}
net: marvell: prestera: Add driver for Prestera family ASIC devices Marvell Prestera 98DX326x integrates up to 24 ports of 1GbE with 8 ports of 10GbE uplinks or 2 ports of 40Gbps stacking for a largely wireless SMB deployment. The current implementation supports only boards designed for the Marvell Switchdev solution and requires special firmware. The core Prestera switching logic is implemented in prestera_main.c, there is an intermediate hw layer between core logic and firmware. It is implemented in prestera_hw.c, the purpose of it is to encapsulate hw related logic, in future there is a plan to support more devices with different HW related configurations. This patch contains only basic switch initialization and RX/TX support over SDMA mechanism. Currently supported devices have DMA access range <= 32bit and require ZONE_DMA to be enabled, for such cases SDMA driver checks if the skb allocated in proper range supported by the Prestera device. Also meanwhile there is no TX interrupt support in current firmware version so recycling work is scheduled on each xmit. Port's mac address is generated from the switch base mac which may be provided via device-tree (static one or as nvme cell), or randomly generated. This is required by the firmware. Co-developed-by: Andrii Savka <andrii.savka@plvision.eu> Signed-off-by: Andrii Savka <andrii.savka@plvision.eu> Co-developed-by: Oleksandr Mazur <oleksandr.mazur@plvision.eu> Signed-off-by: Oleksandr Mazur <oleksandr.mazur@plvision.eu> Co-developed-by: Serhiy Boiko <serhiy.boiko@plvision.eu> Signed-off-by: Serhiy Boiko <serhiy.boiko@plvision.eu> Co-developed-by: Serhiy Pshyk <serhiy.pshyk@plvision.eu> Signed-off-by: Serhiy Pshyk <serhiy.pshyk@plvision.eu> Co-developed-by: Taras Chornyi <taras.chornyi@plvision.eu> Signed-off-by: Taras Chornyi <taras.chornyi@plvision.eu> Co-developed-by: Volodymyr Mytnyk <volodymyr.mytnyk@plvision.eu> Signed-off-by: Volodymyr Mytnyk <volodymyr.mytnyk@plvision.eu> Signed-off-by: Vadym Kochan <vadym.kochan@plvision.eu> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-17 00:30:57 +08:00
int prestera_hw_port_stats_get(const struct prestera_port *port,
struct prestera_port_stats *st)
{
struct prestera_msg_port_attr_req req = {
net: marvell: prestera: add firmware v4.0 support Add firmware (FW) version 4.0 support for Marvell Prestera driver. Major changes have been made to new v4.0 FW ABI to add support of new features, introduce the stability of the FW ABI and ensure better forward compatibility for the future driver vesrions. Current v4.0 FW feature set support does not expect any changes to ABI, as it was defined and tested through long period of time. The ABI may be extended in case of new features, but it will not break the backward compatibility. ABI major changes done in v4.0: - L1 ABI, where MAC and PHY API configuration are split. - ACL has been split to low-level TCAM and Counters ABI to provide more HW ACL capabilities for future driver versions. To support backward support, the addition compatibility layer is required in the driver which will have two different codebase under "if FW-VER elif FW-VER else" conditions that will be removed in the future anyway, So, the idea was to break backward support and focus on more stable FW instead of supporting old version with very minimal and limited set of features/capabilities. Improve FW msg validation: * Use __le64, __le32, __le16 types in msg to/from FW to catch endian mismatch by sparse. * Use BUILD_BUG_ON for structures sent/recv to/from FW. Co-developed-by: Vadym Kochan <vkochan@marvell.com> Signed-off-by: Vadym Kochan <vkochan@marvell.com> Signed-off-by: Yevhen Orlov <yevhen.orlov@plvision.eu> Signed-off-by: Taras Chornyi <tchornyi@marvell.com> Signed-off-by: Volodymyr Mytnyk <vmytnyk@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-29 13:38:07 +08:00
.attr = __cpu_to_le32(PRESTERA_CMD_PORT_ATTR_STATS),
.port = __cpu_to_le32(port->hw_id),
.dev = __cpu_to_le32(port->dev_id),
net: marvell: prestera: Add driver for Prestera family ASIC devices Marvell Prestera 98DX326x integrates up to 24 ports of 1GbE with 8 ports of 10GbE uplinks or 2 ports of 40Gbps stacking for a largely wireless SMB deployment. The current implementation supports only boards designed for the Marvell Switchdev solution and requires special firmware. The core Prestera switching logic is implemented in prestera_main.c, there is an intermediate hw layer between core logic and firmware. It is implemented in prestera_hw.c, the purpose of it is to encapsulate hw related logic, in future there is a plan to support more devices with different HW related configurations. This patch contains only basic switch initialization and RX/TX support over SDMA mechanism. Currently supported devices have DMA access range <= 32bit and require ZONE_DMA to be enabled, for such cases SDMA driver checks if the skb allocated in proper range supported by the Prestera device. Also meanwhile there is no TX interrupt support in current firmware version so recycling work is scheduled on each xmit. Port's mac address is generated from the switch base mac which may be provided via device-tree (static one or as nvme cell), or randomly generated. This is required by the firmware. Co-developed-by: Andrii Savka <andrii.savka@plvision.eu> Signed-off-by: Andrii Savka <andrii.savka@plvision.eu> Co-developed-by: Oleksandr Mazur <oleksandr.mazur@plvision.eu> Signed-off-by: Oleksandr Mazur <oleksandr.mazur@plvision.eu> Co-developed-by: Serhiy Boiko <serhiy.boiko@plvision.eu> Signed-off-by: Serhiy Boiko <serhiy.boiko@plvision.eu> Co-developed-by: Serhiy Pshyk <serhiy.pshyk@plvision.eu> Signed-off-by: Serhiy Pshyk <serhiy.pshyk@plvision.eu> Co-developed-by: Taras Chornyi <taras.chornyi@plvision.eu> Signed-off-by: Taras Chornyi <taras.chornyi@plvision.eu> Co-developed-by: Volodymyr Mytnyk <volodymyr.mytnyk@plvision.eu> Signed-off-by: Volodymyr Mytnyk <volodymyr.mytnyk@plvision.eu> Signed-off-by: Vadym Kochan <vadym.kochan@plvision.eu> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-17 00:30:57 +08:00
};
struct prestera_msg_port_stats_resp resp;
net: marvell: prestera: add firmware v4.0 support Add firmware (FW) version 4.0 support for Marvell Prestera driver. Major changes have been made to new v4.0 FW ABI to add support of new features, introduce the stability of the FW ABI and ensure better forward compatibility for the future driver vesrions. Current v4.0 FW feature set support does not expect any changes to ABI, as it was defined and tested through long period of time. The ABI may be extended in case of new features, but it will not break the backward compatibility. ABI major changes done in v4.0: - L1 ABI, where MAC and PHY API configuration are split. - ACL has been split to low-level TCAM and Counters ABI to provide more HW ACL capabilities for future driver versions. To support backward support, the addition compatibility layer is required in the driver which will have two different codebase under "if FW-VER elif FW-VER else" conditions that will be removed in the future anyway, So, the idea was to break backward support and focus on more stable FW instead of supporting old version with very minimal and limited set of features/capabilities. Improve FW msg validation: * Use __le64, __le32, __le16 types in msg to/from FW to catch endian mismatch by sparse. * Use BUILD_BUG_ON for structures sent/recv to/from FW. Co-developed-by: Vadym Kochan <vkochan@marvell.com> Signed-off-by: Vadym Kochan <vkochan@marvell.com> Signed-off-by: Yevhen Orlov <yevhen.orlov@plvision.eu> Signed-off-by: Taras Chornyi <tchornyi@marvell.com> Signed-off-by: Volodymyr Mytnyk <vmytnyk@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-29 13:38:07 +08:00
__le64 *hw = resp.stats;
net: marvell: prestera: Add driver for Prestera family ASIC devices Marvell Prestera 98DX326x integrates up to 24 ports of 1GbE with 8 ports of 10GbE uplinks or 2 ports of 40Gbps stacking for a largely wireless SMB deployment. The current implementation supports only boards designed for the Marvell Switchdev solution and requires special firmware. The core Prestera switching logic is implemented in prestera_main.c, there is an intermediate hw layer between core logic and firmware. It is implemented in prestera_hw.c, the purpose of it is to encapsulate hw related logic, in future there is a plan to support more devices with different HW related configurations. This patch contains only basic switch initialization and RX/TX support over SDMA mechanism. Currently supported devices have DMA access range <= 32bit and require ZONE_DMA to be enabled, for such cases SDMA driver checks if the skb allocated in proper range supported by the Prestera device. Also meanwhile there is no TX interrupt support in current firmware version so recycling work is scheduled on each xmit. Port's mac address is generated from the switch base mac which may be provided via device-tree (static one or as nvme cell), or randomly generated. This is required by the firmware. Co-developed-by: Andrii Savka <andrii.savka@plvision.eu> Signed-off-by: Andrii Savka <andrii.savka@plvision.eu> Co-developed-by: Oleksandr Mazur <oleksandr.mazur@plvision.eu> Signed-off-by: Oleksandr Mazur <oleksandr.mazur@plvision.eu> Co-developed-by: Serhiy Boiko <serhiy.boiko@plvision.eu> Signed-off-by: Serhiy Boiko <serhiy.boiko@plvision.eu> Co-developed-by: Serhiy Pshyk <serhiy.pshyk@plvision.eu> Signed-off-by: Serhiy Pshyk <serhiy.pshyk@plvision.eu> Co-developed-by: Taras Chornyi <taras.chornyi@plvision.eu> Signed-off-by: Taras Chornyi <taras.chornyi@plvision.eu> Co-developed-by: Volodymyr Mytnyk <volodymyr.mytnyk@plvision.eu> Signed-off-by: Volodymyr Mytnyk <volodymyr.mytnyk@plvision.eu> Signed-off-by: Vadym Kochan <vadym.kochan@plvision.eu> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-17 00:30:57 +08:00
int err;
err = prestera_cmd_ret(port->sw, PRESTERA_CMD_TYPE_PORT_ATTR_GET,
&req.cmd, sizeof(req), &resp.ret, sizeof(resp));
if (err)
return err;
net: marvell: prestera: add firmware v4.0 support Add firmware (FW) version 4.0 support for Marvell Prestera driver. Major changes have been made to new v4.0 FW ABI to add support of new features, introduce the stability of the FW ABI and ensure better forward compatibility for the future driver vesrions. Current v4.0 FW feature set support does not expect any changes to ABI, as it was defined and tested through long period of time. The ABI may be extended in case of new features, but it will not break the backward compatibility. ABI major changes done in v4.0: - L1 ABI, where MAC and PHY API configuration are split. - ACL has been split to low-level TCAM and Counters ABI to provide more HW ACL capabilities for future driver versions. To support backward support, the addition compatibility layer is required in the driver which will have two different codebase under "if FW-VER elif FW-VER else" conditions that will be removed in the future anyway, So, the idea was to break backward support and focus on more stable FW instead of supporting old version with very minimal and limited set of features/capabilities. Improve FW msg validation: * Use __le64, __le32, __le16 types in msg to/from FW to catch endian mismatch by sparse. * Use BUILD_BUG_ON for structures sent/recv to/from FW. Co-developed-by: Vadym Kochan <vkochan@marvell.com> Signed-off-by: Vadym Kochan <vkochan@marvell.com> Signed-off-by: Yevhen Orlov <yevhen.orlov@plvision.eu> Signed-off-by: Taras Chornyi <tchornyi@marvell.com> Signed-off-by: Volodymyr Mytnyk <vmytnyk@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-29 13:38:07 +08:00
st->good_octets_received =
__le64_to_cpu(hw[PRESTERA_PORT_GOOD_OCTETS_RCV_CNT]);
st->bad_octets_received =
__le64_to_cpu(hw[PRESTERA_PORT_BAD_OCTETS_RCV_CNT]);
st->mac_trans_error =
__le64_to_cpu(hw[PRESTERA_PORT_MAC_TRANSMIT_ERR_CNT]);
st->broadcast_frames_received =
__le64_to_cpu(hw[PRESTERA_PORT_BRDC_PKTS_RCV_CNT]);
st->multicast_frames_received =
__le64_to_cpu(hw[PRESTERA_PORT_MC_PKTS_RCV_CNT]);
st->frames_64_octets = __le64_to_cpu(hw[PRESTERA_PORT_PKTS_64L_CNT]);
st->frames_65_to_127_octets =
__le64_to_cpu(hw[PRESTERA_PORT_PKTS_65TO127L_CNT]);
st->frames_128_to_255_octets =
__le64_to_cpu(hw[PRESTERA_PORT_PKTS_128TO255L_CNT]);
st->frames_256_to_511_octets =
__le64_to_cpu(hw[PRESTERA_PORT_PKTS_256TO511L_CNT]);
st->frames_512_to_1023_octets =
__le64_to_cpu(hw[PRESTERA_PORT_PKTS_512TO1023L_CNT]);
st->frames_1024_to_max_octets =
__le64_to_cpu(hw[PRESTERA_PORT_PKTS_1024TOMAXL_CNT]);
st->excessive_collision =
__le64_to_cpu(hw[PRESTERA_PORT_EXCESSIVE_COLLISIONS_CNT]);
st->multicast_frames_sent =
__le64_to_cpu(hw[PRESTERA_PORT_MC_PKTS_SENT_CNT]);
st->broadcast_frames_sent =
__le64_to_cpu(hw[PRESTERA_PORT_BRDC_PKTS_SENT_CNT]);
st->fc_sent = __le64_to_cpu(hw[PRESTERA_PORT_FC_SENT_CNT]);
st->fc_received = __le64_to_cpu(hw[PRESTERA_PORT_GOOD_FC_RCV_CNT]);
st->buffer_overrun = __le64_to_cpu(hw[PRESTERA_PORT_DROP_EVENTS_CNT]);
st->undersize = __le64_to_cpu(hw[PRESTERA_PORT_UNDERSIZE_PKTS_CNT]);
st->fragments = __le64_to_cpu(hw[PRESTERA_PORT_FRAGMENTS_PKTS_CNT]);
st->oversize = __le64_to_cpu(hw[PRESTERA_PORT_OVERSIZE_PKTS_CNT]);
st->jabber = __le64_to_cpu(hw[PRESTERA_PORT_JABBER_PKTS_CNT]);
st->rx_error_frame_received =
__le64_to_cpu(hw[PRESTERA_PORT_MAC_RCV_ERROR_CNT]);
st->bad_crc = __le64_to_cpu(hw[PRESTERA_PORT_BAD_CRC_CNT]);
st->collisions = __le64_to_cpu(hw[PRESTERA_PORT_COLLISIONS_CNT]);
st->late_collision =
__le64_to_cpu(hw[PRESTERA_PORT_LATE_COLLISIONS_CNT]);
st->unicast_frames_received =
__le64_to_cpu(hw[PRESTERA_PORT_GOOD_UC_PKTS_RCV_CNT]);
st->unicast_frames_sent =
__le64_to_cpu(hw[PRESTERA_PORT_GOOD_UC_PKTS_SENT_CNT]);
st->sent_multiple =
__le64_to_cpu(hw[PRESTERA_PORT_MULTIPLE_PKTS_SENT_CNT]);
st->sent_deferred =
__le64_to_cpu(hw[PRESTERA_PORT_DEFERRED_PKTS_SENT_CNT]);
st->good_octets_sent =
__le64_to_cpu(hw[PRESTERA_PORT_GOOD_OCTETS_SENT_CNT]);
net: marvell: prestera: Add driver for Prestera family ASIC devices Marvell Prestera 98DX326x integrates up to 24 ports of 1GbE with 8 ports of 10GbE uplinks or 2 ports of 40Gbps stacking for a largely wireless SMB deployment. The current implementation supports only boards designed for the Marvell Switchdev solution and requires special firmware. The core Prestera switching logic is implemented in prestera_main.c, there is an intermediate hw layer between core logic and firmware. It is implemented in prestera_hw.c, the purpose of it is to encapsulate hw related logic, in future there is a plan to support more devices with different HW related configurations. This patch contains only basic switch initialization and RX/TX support over SDMA mechanism. Currently supported devices have DMA access range <= 32bit and require ZONE_DMA to be enabled, for such cases SDMA driver checks if the skb allocated in proper range supported by the Prestera device. Also meanwhile there is no TX interrupt support in current firmware version so recycling work is scheduled on each xmit. Port's mac address is generated from the switch base mac which may be provided via device-tree (static one or as nvme cell), or randomly generated. This is required by the firmware. Co-developed-by: Andrii Savka <andrii.savka@plvision.eu> Signed-off-by: Andrii Savka <andrii.savka@plvision.eu> Co-developed-by: Oleksandr Mazur <oleksandr.mazur@plvision.eu> Signed-off-by: Oleksandr Mazur <oleksandr.mazur@plvision.eu> Co-developed-by: Serhiy Boiko <serhiy.boiko@plvision.eu> Signed-off-by: Serhiy Boiko <serhiy.boiko@plvision.eu> Co-developed-by: Serhiy Pshyk <serhiy.pshyk@plvision.eu> Signed-off-by: Serhiy Pshyk <serhiy.pshyk@plvision.eu> Co-developed-by: Taras Chornyi <taras.chornyi@plvision.eu> Signed-off-by: Taras Chornyi <taras.chornyi@plvision.eu> Co-developed-by: Volodymyr Mytnyk <volodymyr.mytnyk@plvision.eu> Signed-off-by: Volodymyr Mytnyk <volodymyr.mytnyk@plvision.eu> Signed-off-by: Vadym Kochan <vadym.kochan@plvision.eu> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-17 00:30:57 +08:00
return 0;
}
int prestera_hw_port_learning_set(struct prestera_port *port, bool enable)
{
struct prestera_msg_port_attr_req req = {
net: marvell: prestera: add firmware v4.0 support Add firmware (FW) version 4.0 support for Marvell Prestera driver. Major changes have been made to new v4.0 FW ABI to add support of new features, introduce the stability of the FW ABI and ensure better forward compatibility for the future driver vesrions. Current v4.0 FW feature set support does not expect any changes to ABI, as it was defined and tested through long period of time. The ABI may be extended in case of new features, but it will not break the backward compatibility. ABI major changes done in v4.0: - L1 ABI, where MAC and PHY API configuration are split. - ACL has been split to low-level TCAM and Counters ABI to provide more HW ACL capabilities for future driver versions. To support backward support, the addition compatibility layer is required in the driver which will have two different codebase under "if FW-VER elif FW-VER else" conditions that will be removed in the future anyway, So, the idea was to break backward support and focus on more stable FW instead of supporting old version with very minimal and limited set of features/capabilities. Improve FW msg validation: * Use __le64, __le32, __le16 types in msg to/from FW to catch endian mismatch by sparse. * Use BUILD_BUG_ON for structures sent/recv to/from FW. Co-developed-by: Vadym Kochan <vkochan@marvell.com> Signed-off-by: Vadym Kochan <vkochan@marvell.com> Signed-off-by: Yevhen Orlov <yevhen.orlov@plvision.eu> Signed-off-by: Taras Chornyi <tchornyi@marvell.com> Signed-off-by: Volodymyr Mytnyk <vmytnyk@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-29 13:38:07 +08:00
.attr = __cpu_to_le32(PRESTERA_CMD_PORT_ATTR_LEARNING),
.port = __cpu_to_le32(port->hw_id),
.dev = __cpu_to_le32(port->dev_id),
.param = {
.learning = enable,
}
};
return prestera_cmd(port->sw, PRESTERA_CMD_TYPE_PORT_ATTR_SET,
&req.cmd, sizeof(req));
}
static int prestera_hw_port_uc_flood_set(struct prestera_port *port, bool flood)
{
struct prestera_msg_port_attr_req req = {
net: marvell: prestera: add firmware v4.0 support Add firmware (FW) version 4.0 support for Marvell Prestera driver. Major changes have been made to new v4.0 FW ABI to add support of new features, introduce the stability of the FW ABI and ensure better forward compatibility for the future driver vesrions. Current v4.0 FW feature set support does not expect any changes to ABI, as it was defined and tested through long period of time. The ABI may be extended in case of new features, but it will not break the backward compatibility. ABI major changes done in v4.0: - L1 ABI, where MAC and PHY API configuration are split. - ACL has been split to low-level TCAM and Counters ABI to provide more HW ACL capabilities for future driver versions. To support backward support, the addition compatibility layer is required in the driver which will have two different codebase under "if FW-VER elif FW-VER else" conditions that will be removed in the future anyway, So, the idea was to break backward support and focus on more stable FW instead of supporting old version with very minimal and limited set of features/capabilities. Improve FW msg validation: * Use __le64, __le32, __le16 types in msg to/from FW to catch endian mismatch by sparse. * Use BUILD_BUG_ON for structures sent/recv to/from FW. Co-developed-by: Vadym Kochan <vkochan@marvell.com> Signed-off-by: Vadym Kochan <vkochan@marvell.com> Signed-off-by: Yevhen Orlov <yevhen.orlov@plvision.eu> Signed-off-by: Taras Chornyi <tchornyi@marvell.com> Signed-off-by: Volodymyr Mytnyk <vmytnyk@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-29 13:38:07 +08:00
.attr = __cpu_to_le32(PRESTERA_CMD_PORT_ATTR_FLOOD),
.port = __cpu_to_le32(port->hw_id),
.dev = __cpu_to_le32(port->dev_id),
.param = {
.flood_ext = {
.type = PRESTERA_PORT_FLOOD_TYPE_UC,
.enable = flood,
}
}
};
return prestera_cmd(port->sw, PRESTERA_CMD_TYPE_PORT_ATTR_SET,
&req.cmd, sizeof(req));
}
static int prestera_hw_port_mc_flood_set(struct prestera_port *port, bool flood)
{
struct prestera_msg_port_attr_req req = {
net: marvell: prestera: add firmware v4.0 support Add firmware (FW) version 4.0 support for Marvell Prestera driver. Major changes have been made to new v4.0 FW ABI to add support of new features, introduce the stability of the FW ABI and ensure better forward compatibility for the future driver vesrions. Current v4.0 FW feature set support does not expect any changes to ABI, as it was defined and tested through long period of time. The ABI may be extended in case of new features, but it will not break the backward compatibility. ABI major changes done in v4.0: - L1 ABI, where MAC and PHY API configuration are split. - ACL has been split to low-level TCAM and Counters ABI to provide more HW ACL capabilities for future driver versions. To support backward support, the addition compatibility layer is required in the driver which will have two different codebase under "if FW-VER elif FW-VER else" conditions that will be removed in the future anyway, So, the idea was to break backward support and focus on more stable FW instead of supporting old version with very minimal and limited set of features/capabilities. Improve FW msg validation: * Use __le64, __le32, __le16 types in msg to/from FW to catch endian mismatch by sparse. * Use BUILD_BUG_ON for structures sent/recv to/from FW. Co-developed-by: Vadym Kochan <vkochan@marvell.com> Signed-off-by: Vadym Kochan <vkochan@marvell.com> Signed-off-by: Yevhen Orlov <yevhen.orlov@plvision.eu> Signed-off-by: Taras Chornyi <tchornyi@marvell.com> Signed-off-by: Volodymyr Mytnyk <vmytnyk@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-29 13:38:07 +08:00
.attr = __cpu_to_le32(PRESTERA_CMD_PORT_ATTR_FLOOD),
.port = __cpu_to_le32(port->hw_id),
.dev = __cpu_to_le32(port->dev_id),
.param = {
.flood_ext = {
.type = PRESTERA_PORT_FLOOD_TYPE_MC,
.enable = flood,
}
}
};
return prestera_cmd(port->sw, PRESTERA_CMD_TYPE_PORT_ATTR_SET,
&req.cmd, sizeof(req));
}
static int prestera_hw_port_flood_set_v2(struct prestera_port *port, bool flood)
{
struct prestera_msg_port_attr_req req = {
net: marvell: prestera: add firmware v4.0 support Add firmware (FW) version 4.0 support for Marvell Prestera driver. Major changes have been made to new v4.0 FW ABI to add support of new features, introduce the stability of the FW ABI and ensure better forward compatibility for the future driver vesrions. Current v4.0 FW feature set support does not expect any changes to ABI, as it was defined and tested through long period of time. The ABI may be extended in case of new features, but it will not break the backward compatibility. ABI major changes done in v4.0: - L1 ABI, where MAC and PHY API configuration are split. - ACL has been split to low-level TCAM and Counters ABI to provide more HW ACL capabilities for future driver versions. To support backward support, the addition compatibility layer is required in the driver which will have two different codebase under "if FW-VER elif FW-VER else" conditions that will be removed in the future anyway, So, the idea was to break backward support and focus on more stable FW instead of supporting old version with very minimal and limited set of features/capabilities. Improve FW msg validation: * Use __le64, __le32, __le16 types in msg to/from FW to catch endian mismatch by sparse. * Use BUILD_BUG_ON for structures sent/recv to/from FW. Co-developed-by: Vadym Kochan <vkochan@marvell.com> Signed-off-by: Vadym Kochan <vkochan@marvell.com> Signed-off-by: Yevhen Orlov <yevhen.orlov@plvision.eu> Signed-off-by: Taras Chornyi <tchornyi@marvell.com> Signed-off-by: Volodymyr Mytnyk <vmytnyk@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-29 13:38:07 +08:00
.attr = __cpu_to_le32(PRESTERA_CMD_PORT_ATTR_FLOOD),
.port = __cpu_to_le32(port->hw_id),
.dev = __cpu_to_le32(port->dev_id),
.param = {
.flood = flood,
}
};
return prestera_cmd(port->sw, PRESTERA_CMD_TYPE_PORT_ATTR_SET,
&req.cmd, sizeof(req));
}
int prestera_hw_port_flood_set(struct prestera_port *port, unsigned long mask,
unsigned long val)
{
int err;
if (port->sw->dev->fw_rev.maj <= 2) {
if (!(mask & BR_FLOOD))
return 0;
return prestera_hw_port_flood_set_v2(port, val & BR_FLOOD);
}
if (mask & BR_FLOOD) {
err = prestera_hw_port_uc_flood_set(port, val & BR_FLOOD);
if (err)
goto err_uc_flood;
}
if (mask & BR_MCAST_FLOOD) {
err = prestera_hw_port_mc_flood_set(port, val & BR_MCAST_FLOOD);
if (err)
goto err_mc_flood;
}
return 0;
err_mc_flood:
prestera_hw_port_mc_flood_set(port, 0);
err_uc_flood:
if (mask & BR_FLOOD)
prestera_hw_port_uc_flood_set(port, 0);
return err;
}
int prestera_hw_vlan_create(struct prestera_switch *sw, u16 vid)
{
struct prestera_msg_vlan_req req = {
net: marvell: prestera: add firmware v4.0 support Add firmware (FW) version 4.0 support for Marvell Prestera driver. Major changes have been made to new v4.0 FW ABI to add support of new features, introduce the stability of the FW ABI and ensure better forward compatibility for the future driver vesrions. Current v4.0 FW feature set support does not expect any changes to ABI, as it was defined and tested through long period of time. The ABI may be extended in case of new features, but it will not break the backward compatibility. ABI major changes done in v4.0: - L1 ABI, where MAC and PHY API configuration are split. - ACL has been split to low-level TCAM and Counters ABI to provide more HW ACL capabilities for future driver versions. To support backward support, the addition compatibility layer is required in the driver which will have two different codebase under "if FW-VER elif FW-VER else" conditions that will be removed in the future anyway, So, the idea was to break backward support and focus on more stable FW instead of supporting old version with very minimal and limited set of features/capabilities. Improve FW msg validation: * Use __le64, __le32, __le16 types in msg to/from FW to catch endian mismatch by sparse. * Use BUILD_BUG_ON for structures sent/recv to/from FW. Co-developed-by: Vadym Kochan <vkochan@marvell.com> Signed-off-by: Vadym Kochan <vkochan@marvell.com> Signed-off-by: Yevhen Orlov <yevhen.orlov@plvision.eu> Signed-off-by: Taras Chornyi <tchornyi@marvell.com> Signed-off-by: Volodymyr Mytnyk <vmytnyk@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-29 13:38:07 +08:00
.vid = __cpu_to_le16(vid),
};
return prestera_cmd(sw, PRESTERA_CMD_TYPE_VLAN_CREATE,
&req.cmd, sizeof(req));
}
int prestera_hw_vlan_delete(struct prestera_switch *sw, u16 vid)
{
struct prestera_msg_vlan_req req = {
net: marvell: prestera: add firmware v4.0 support Add firmware (FW) version 4.0 support for Marvell Prestera driver. Major changes have been made to new v4.0 FW ABI to add support of new features, introduce the stability of the FW ABI and ensure better forward compatibility for the future driver vesrions. Current v4.0 FW feature set support does not expect any changes to ABI, as it was defined and tested through long period of time. The ABI may be extended in case of new features, but it will not break the backward compatibility. ABI major changes done in v4.0: - L1 ABI, where MAC and PHY API configuration are split. - ACL has been split to low-level TCAM and Counters ABI to provide more HW ACL capabilities for future driver versions. To support backward support, the addition compatibility layer is required in the driver which will have two different codebase under "if FW-VER elif FW-VER else" conditions that will be removed in the future anyway, So, the idea was to break backward support and focus on more stable FW instead of supporting old version with very minimal and limited set of features/capabilities. Improve FW msg validation: * Use __le64, __le32, __le16 types in msg to/from FW to catch endian mismatch by sparse. * Use BUILD_BUG_ON for structures sent/recv to/from FW. Co-developed-by: Vadym Kochan <vkochan@marvell.com> Signed-off-by: Vadym Kochan <vkochan@marvell.com> Signed-off-by: Yevhen Orlov <yevhen.orlov@plvision.eu> Signed-off-by: Taras Chornyi <tchornyi@marvell.com> Signed-off-by: Volodymyr Mytnyk <vmytnyk@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-29 13:38:07 +08:00
.vid = __cpu_to_le16(vid),
};
return prestera_cmd(sw, PRESTERA_CMD_TYPE_VLAN_DELETE,
&req.cmd, sizeof(req));
}
int prestera_hw_vlan_port_set(struct prestera_port *port, u16 vid,
bool is_member, bool untagged)
{
struct prestera_msg_vlan_req req = {
net: marvell: prestera: add firmware v4.0 support Add firmware (FW) version 4.0 support for Marvell Prestera driver. Major changes have been made to new v4.0 FW ABI to add support of new features, introduce the stability of the FW ABI and ensure better forward compatibility for the future driver vesrions. Current v4.0 FW feature set support does not expect any changes to ABI, as it was defined and tested through long period of time. The ABI may be extended in case of new features, but it will not break the backward compatibility. ABI major changes done in v4.0: - L1 ABI, where MAC and PHY API configuration are split. - ACL has been split to low-level TCAM and Counters ABI to provide more HW ACL capabilities for future driver versions. To support backward support, the addition compatibility layer is required in the driver which will have two different codebase under "if FW-VER elif FW-VER else" conditions that will be removed in the future anyway, So, the idea was to break backward support and focus on more stable FW instead of supporting old version with very minimal and limited set of features/capabilities. Improve FW msg validation: * Use __le64, __le32, __le16 types in msg to/from FW to catch endian mismatch by sparse. * Use BUILD_BUG_ON for structures sent/recv to/from FW. Co-developed-by: Vadym Kochan <vkochan@marvell.com> Signed-off-by: Vadym Kochan <vkochan@marvell.com> Signed-off-by: Yevhen Orlov <yevhen.orlov@plvision.eu> Signed-off-by: Taras Chornyi <tchornyi@marvell.com> Signed-off-by: Volodymyr Mytnyk <vmytnyk@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-29 13:38:07 +08:00
.port = __cpu_to_le32(port->hw_id),
.dev = __cpu_to_le32(port->dev_id),
.vid = __cpu_to_le16(vid),
.is_member = is_member,
.is_tagged = !untagged,
};
return prestera_cmd(port->sw, PRESTERA_CMD_TYPE_VLAN_PORT_SET,
&req.cmd, sizeof(req));
}
int prestera_hw_vlan_port_vid_set(struct prestera_port *port, u16 vid)
{
struct prestera_msg_vlan_req req = {
net: marvell: prestera: add firmware v4.0 support Add firmware (FW) version 4.0 support for Marvell Prestera driver. Major changes have been made to new v4.0 FW ABI to add support of new features, introduce the stability of the FW ABI and ensure better forward compatibility for the future driver vesrions. Current v4.0 FW feature set support does not expect any changes to ABI, as it was defined and tested through long period of time. The ABI may be extended in case of new features, but it will not break the backward compatibility. ABI major changes done in v4.0: - L1 ABI, where MAC and PHY API configuration are split. - ACL has been split to low-level TCAM and Counters ABI to provide more HW ACL capabilities for future driver versions. To support backward support, the addition compatibility layer is required in the driver which will have two different codebase under "if FW-VER elif FW-VER else" conditions that will be removed in the future anyway, So, the idea was to break backward support and focus on more stable FW instead of supporting old version with very minimal and limited set of features/capabilities. Improve FW msg validation: * Use __le64, __le32, __le16 types in msg to/from FW to catch endian mismatch by sparse. * Use BUILD_BUG_ON for structures sent/recv to/from FW. Co-developed-by: Vadym Kochan <vkochan@marvell.com> Signed-off-by: Vadym Kochan <vkochan@marvell.com> Signed-off-by: Yevhen Orlov <yevhen.orlov@plvision.eu> Signed-off-by: Taras Chornyi <tchornyi@marvell.com> Signed-off-by: Volodymyr Mytnyk <vmytnyk@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-29 13:38:07 +08:00
.port = __cpu_to_le32(port->hw_id),
.dev = __cpu_to_le32(port->dev_id),
.vid = __cpu_to_le16(vid),
};
return prestera_cmd(port->sw, PRESTERA_CMD_TYPE_VLAN_PVID_SET,
&req.cmd, sizeof(req));
}
int prestera_hw_vlan_port_stp_set(struct prestera_port *port, u16 vid, u8 state)
{
struct prestera_msg_stp_req req = {
net: marvell: prestera: add firmware v4.0 support Add firmware (FW) version 4.0 support for Marvell Prestera driver. Major changes have been made to new v4.0 FW ABI to add support of new features, introduce the stability of the FW ABI and ensure better forward compatibility for the future driver vesrions. Current v4.0 FW feature set support does not expect any changes to ABI, as it was defined and tested through long period of time. The ABI may be extended in case of new features, but it will not break the backward compatibility. ABI major changes done in v4.0: - L1 ABI, where MAC and PHY API configuration are split. - ACL has been split to low-level TCAM and Counters ABI to provide more HW ACL capabilities for future driver versions. To support backward support, the addition compatibility layer is required in the driver which will have two different codebase under "if FW-VER elif FW-VER else" conditions that will be removed in the future anyway, So, the idea was to break backward support and focus on more stable FW instead of supporting old version with very minimal and limited set of features/capabilities. Improve FW msg validation: * Use __le64, __le32, __le16 types in msg to/from FW to catch endian mismatch by sparse. * Use BUILD_BUG_ON for structures sent/recv to/from FW. Co-developed-by: Vadym Kochan <vkochan@marvell.com> Signed-off-by: Vadym Kochan <vkochan@marvell.com> Signed-off-by: Yevhen Orlov <yevhen.orlov@plvision.eu> Signed-off-by: Taras Chornyi <tchornyi@marvell.com> Signed-off-by: Volodymyr Mytnyk <vmytnyk@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-29 13:38:07 +08:00
.port = __cpu_to_le32(port->hw_id),
.dev = __cpu_to_le32(port->dev_id),
.vid = __cpu_to_le16(vid),
.state = state,
};
return prestera_cmd(port->sw, PRESTERA_CMD_TYPE_STP_PORT_SET,
&req.cmd, sizeof(req));
}
int prestera_hw_fdb_add(struct prestera_port *port, const unsigned char *mac,
u16 vid, bool dynamic)
{
struct prestera_msg_fdb_req req = {
.dest = {
net: marvell: prestera: add firmware v4.0 support Add firmware (FW) version 4.0 support for Marvell Prestera driver. Major changes have been made to new v4.0 FW ABI to add support of new features, introduce the stability of the FW ABI and ensure better forward compatibility for the future driver vesrions. Current v4.0 FW feature set support does not expect any changes to ABI, as it was defined and tested through long period of time. The ABI may be extended in case of new features, but it will not break the backward compatibility. ABI major changes done in v4.0: - L1 ABI, where MAC and PHY API configuration are split. - ACL has been split to low-level TCAM and Counters ABI to provide more HW ACL capabilities for future driver versions. To support backward support, the addition compatibility layer is required in the driver which will have two different codebase under "if FW-VER elif FW-VER else" conditions that will be removed in the future anyway, So, the idea was to break backward support and focus on more stable FW instead of supporting old version with very minimal and limited set of features/capabilities. Improve FW msg validation: * Use __le64, __le32, __le16 types in msg to/from FW to catch endian mismatch by sparse. * Use BUILD_BUG_ON for structures sent/recv to/from FW. Co-developed-by: Vadym Kochan <vkochan@marvell.com> Signed-off-by: Vadym Kochan <vkochan@marvell.com> Signed-off-by: Yevhen Orlov <yevhen.orlov@plvision.eu> Signed-off-by: Taras Chornyi <tchornyi@marvell.com> Signed-off-by: Volodymyr Mytnyk <vmytnyk@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-29 13:38:07 +08:00
.dev = __cpu_to_le32(port->dev_id),
.port = __cpu_to_le32(port->hw_id),
},
net: marvell: prestera: add firmware v4.0 support Add firmware (FW) version 4.0 support for Marvell Prestera driver. Major changes have been made to new v4.0 FW ABI to add support of new features, introduce the stability of the FW ABI and ensure better forward compatibility for the future driver vesrions. Current v4.0 FW feature set support does not expect any changes to ABI, as it was defined and tested through long period of time. The ABI may be extended in case of new features, but it will not break the backward compatibility. ABI major changes done in v4.0: - L1 ABI, where MAC and PHY API configuration are split. - ACL has been split to low-level TCAM and Counters ABI to provide more HW ACL capabilities for future driver versions. To support backward support, the addition compatibility layer is required in the driver which will have two different codebase under "if FW-VER elif FW-VER else" conditions that will be removed in the future anyway, So, the idea was to break backward support and focus on more stable FW instead of supporting old version with very minimal and limited set of features/capabilities. Improve FW msg validation: * Use __le64, __le32, __le16 types in msg to/from FW to catch endian mismatch by sparse. * Use BUILD_BUG_ON for structures sent/recv to/from FW. Co-developed-by: Vadym Kochan <vkochan@marvell.com> Signed-off-by: Vadym Kochan <vkochan@marvell.com> Signed-off-by: Yevhen Orlov <yevhen.orlov@plvision.eu> Signed-off-by: Taras Chornyi <tchornyi@marvell.com> Signed-off-by: Volodymyr Mytnyk <vmytnyk@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-29 13:38:07 +08:00
.vid = __cpu_to_le16(vid),
.dynamic = dynamic,
};
ether_addr_copy(req.mac, mac);
return prestera_cmd(port->sw, PRESTERA_CMD_TYPE_FDB_ADD,
&req.cmd, sizeof(req));
}
int prestera_hw_fdb_del(struct prestera_port *port, const unsigned char *mac,
u16 vid)
{
struct prestera_msg_fdb_req req = {
.dest = {
net: marvell: prestera: add firmware v4.0 support Add firmware (FW) version 4.0 support for Marvell Prestera driver. Major changes have been made to new v4.0 FW ABI to add support of new features, introduce the stability of the FW ABI and ensure better forward compatibility for the future driver vesrions. Current v4.0 FW feature set support does not expect any changes to ABI, as it was defined and tested through long period of time. The ABI may be extended in case of new features, but it will not break the backward compatibility. ABI major changes done in v4.0: - L1 ABI, where MAC and PHY API configuration are split. - ACL has been split to low-level TCAM and Counters ABI to provide more HW ACL capabilities for future driver versions. To support backward support, the addition compatibility layer is required in the driver which will have two different codebase under "if FW-VER elif FW-VER else" conditions that will be removed in the future anyway, So, the idea was to break backward support and focus on more stable FW instead of supporting old version with very minimal and limited set of features/capabilities. Improve FW msg validation: * Use __le64, __le32, __le16 types in msg to/from FW to catch endian mismatch by sparse. * Use BUILD_BUG_ON for structures sent/recv to/from FW. Co-developed-by: Vadym Kochan <vkochan@marvell.com> Signed-off-by: Vadym Kochan <vkochan@marvell.com> Signed-off-by: Yevhen Orlov <yevhen.orlov@plvision.eu> Signed-off-by: Taras Chornyi <tchornyi@marvell.com> Signed-off-by: Volodymyr Mytnyk <vmytnyk@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-29 13:38:07 +08:00
.dev = __cpu_to_le32(port->dev_id),
.port = __cpu_to_le32(port->hw_id),
},
net: marvell: prestera: add firmware v4.0 support Add firmware (FW) version 4.0 support for Marvell Prestera driver. Major changes have been made to new v4.0 FW ABI to add support of new features, introduce the stability of the FW ABI and ensure better forward compatibility for the future driver vesrions. Current v4.0 FW feature set support does not expect any changes to ABI, as it was defined and tested through long period of time. The ABI may be extended in case of new features, but it will not break the backward compatibility. ABI major changes done in v4.0: - L1 ABI, where MAC and PHY API configuration are split. - ACL has been split to low-level TCAM and Counters ABI to provide more HW ACL capabilities for future driver versions. To support backward support, the addition compatibility layer is required in the driver which will have two different codebase under "if FW-VER elif FW-VER else" conditions that will be removed in the future anyway, So, the idea was to break backward support and focus on more stable FW instead of supporting old version with very minimal and limited set of features/capabilities. Improve FW msg validation: * Use __le64, __le32, __le16 types in msg to/from FW to catch endian mismatch by sparse. * Use BUILD_BUG_ON for structures sent/recv to/from FW. Co-developed-by: Vadym Kochan <vkochan@marvell.com> Signed-off-by: Vadym Kochan <vkochan@marvell.com> Signed-off-by: Yevhen Orlov <yevhen.orlov@plvision.eu> Signed-off-by: Taras Chornyi <tchornyi@marvell.com> Signed-off-by: Volodymyr Mytnyk <vmytnyk@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-29 13:38:07 +08:00
.vid = __cpu_to_le16(vid),
};
ether_addr_copy(req.mac, mac);
return prestera_cmd(port->sw, PRESTERA_CMD_TYPE_FDB_DELETE,
&req.cmd, sizeof(req));
}
int prestera_hw_lag_fdb_add(struct prestera_switch *sw, u16 lag_id,
const unsigned char *mac, u16 vid, bool dynamic)
{
struct prestera_msg_fdb_req req = {
.dest_type = PRESTERA_HW_FDB_ENTRY_TYPE_LAG,
.dest = {
net: marvell: prestera: add firmware v4.0 support Add firmware (FW) version 4.0 support for Marvell Prestera driver. Major changes have been made to new v4.0 FW ABI to add support of new features, introduce the stability of the FW ABI and ensure better forward compatibility for the future driver vesrions. Current v4.0 FW feature set support does not expect any changes to ABI, as it was defined and tested through long period of time. The ABI may be extended in case of new features, but it will not break the backward compatibility. ABI major changes done in v4.0: - L1 ABI, where MAC and PHY API configuration are split. - ACL has been split to low-level TCAM and Counters ABI to provide more HW ACL capabilities for future driver versions. To support backward support, the addition compatibility layer is required in the driver which will have two different codebase under "if FW-VER elif FW-VER else" conditions that will be removed in the future anyway, So, the idea was to break backward support and focus on more stable FW instead of supporting old version with very minimal and limited set of features/capabilities. Improve FW msg validation: * Use __le64, __le32, __le16 types in msg to/from FW to catch endian mismatch by sparse. * Use BUILD_BUG_ON for structures sent/recv to/from FW. Co-developed-by: Vadym Kochan <vkochan@marvell.com> Signed-off-by: Vadym Kochan <vkochan@marvell.com> Signed-off-by: Yevhen Orlov <yevhen.orlov@plvision.eu> Signed-off-by: Taras Chornyi <tchornyi@marvell.com> Signed-off-by: Volodymyr Mytnyk <vmytnyk@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-29 13:38:07 +08:00
.lag_id = __cpu_to_le16(lag_id),
},
net: marvell: prestera: add firmware v4.0 support Add firmware (FW) version 4.0 support for Marvell Prestera driver. Major changes have been made to new v4.0 FW ABI to add support of new features, introduce the stability of the FW ABI and ensure better forward compatibility for the future driver vesrions. Current v4.0 FW feature set support does not expect any changes to ABI, as it was defined and tested through long period of time. The ABI may be extended in case of new features, but it will not break the backward compatibility. ABI major changes done in v4.0: - L1 ABI, where MAC and PHY API configuration are split. - ACL has been split to low-level TCAM and Counters ABI to provide more HW ACL capabilities for future driver versions. To support backward support, the addition compatibility layer is required in the driver which will have two different codebase under "if FW-VER elif FW-VER else" conditions that will be removed in the future anyway, So, the idea was to break backward support and focus on more stable FW instead of supporting old version with very minimal and limited set of features/capabilities. Improve FW msg validation: * Use __le64, __le32, __le16 types in msg to/from FW to catch endian mismatch by sparse. * Use BUILD_BUG_ON for structures sent/recv to/from FW. Co-developed-by: Vadym Kochan <vkochan@marvell.com> Signed-off-by: Vadym Kochan <vkochan@marvell.com> Signed-off-by: Yevhen Orlov <yevhen.orlov@plvision.eu> Signed-off-by: Taras Chornyi <tchornyi@marvell.com> Signed-off-by: Volodymyr Mytnyk <vmytnyk@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-29 13:38:07 +08:00
.vid = __cpu_to_le16(vid),
.dynamic = dynamic,
};
ether_addr_copy(req.mac, mac);
return prestera_cmd(sw, PRESTERA_CMD_TYPE_FDB_ADD,
&req.cmd, sizeof(req));
}
int prestera_hw_lag_fdb_del(struct prestera_switch *sw, u16 lag_id,
const unsigned char *mac, u16 vid)
{
struct prestera_msg_fdb_req req = {
.dest_type = PRESTERA_HW_FDB_ENTRY_TYPE_LAG,
.dest = {
net: marvell: prestera: add firmware v4.0 support Add firmware (FW) version 4.0 support for Marvell Prestera driver. Major changes have been made to new v4.0 FW ABI to add support of new features, introduce the stability of the FW ABI and ensure better forward compatibility for the future driver vesrions. Current v4.0 FW feature set support does not expect any changes to ABI, as it was defined and tested through long period of time. The ABI may be extended in case of new features, but it will not break the backward compatibility. ABI major changes done in v4.0: - L1 ABI, where MAC and PHY API configuration are split. - ACL has been split to low-level TCAM and Counters ABI to provide more HW ACL capabilities for future driver versions. To support backward support, the addition compatibility layer is required in the driver which will have two different codebase under "if FW-VER elif FW-VER else" conditions that will be removed in the future anyway, So, the idea was to break backward support and focus on more stable FW instead of supporting old version with very minimal and limited set of features/capabilities. Improve FW msg validation: * Use __le64, __le32, __le16 types in msg to/from FW to catch endian mismatch by sparse. * Use BUILD_BUG_ON for structures sent/recv to/from FW. Co-developed-by: Vadym Kochan <vkochan@marvell.com> Signed-off-by: Vadym Kochan <vkochan@marvell.com> Signed-off-by: Yevhen Orlov <yevhen.orlov@plvision.eu> Signed-off-by: Taras Chornyi <tchornyi@marvell.com> Signed-off-by: Volodymyr Mytnyk <vmytnyk@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-29 13:38:07 +08:00
.lag_id = __cpu_to_le16(lag_id),
},
net: marvell: prestera: add firmware v4.0 support Add firmware (FW) version 4.0 support for Marvell Prestera driver. Major changes have been made to new v4.0 FW ABI to add support of new features, introduce the stability of the FW ABI and ensure better forward compatibility for the future driver vesrions. Current v4.0 FW feature set support does not expect any changes to ABI, as it was defined and tested through long period of time. The ABI may be extended in case of new features, but it will not break the backward compatibility. ABI major changes done in v4.0: - L1 ABI, where MAC and PHY API configuration are split. - ACL has been split to low-level TCAM and Counters ABI to provide more HW ACL capabilities for future driver versions. To support backward support, the addition compatibility layer is required in the driver which will have two different codebase under "if FW-VER elif FW-VER else" conditions that will be removed in the future anyway, So, the idea was to break backward support and focus on more stable FW instead of supporting old version with very minimal and limited set of features/capabilities. Improve FW msg validation: * Use __le64, __le32, __le16 types in msg to/from FW to catch endian mismatch by sparse. * Use BUILD_BUG_ON for structures sent/recv to/from FW. Co-developed-by: Vadym Kochan <vkochan@marvell.com> Signed-off-by: Vadym Kochan <vkochan@marvell.com> Signed-off-by: Yevhen Orlov <yevhen.orlov@plvision.eu> Signed-off-by: Taras Chornyi <tchornyi@marvell.com> Signed-off-by: Volodymyr Mytnyk <vmytnyk@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-29 13:38:07 +08:00
.vid = __cpu_to_le16(vid),
};
ether_addr_copy(req.mac, mac);
return prestera_cmd(sw, PRESTERA_CMD_TYPE_FDB_DELETE,
&req.cmd, sizeof(req));
}
int prestera_hw_fdb_flush_port(struct prestera_port *port, u32 mode)
{
struct prestera_msg_fdb_req req = {
.dest = {
net: marvell: prestera: add firmware v4.0 support Add firmware (FW) version 4.0 support for Marvell Prestera driver. Major changes have been made to new v4.0 FW ABI to add support of new features, introduce the stability of the FW ABI and ensure better forward compatibility for the future driver vesrions. Current v4.0 FW feature set support does not expect any changes to ABI, as it was defined and tested through long period of time. The ABI may be extended in case of new features, but it will not break the backward compatibility. ABI major changes done in v4.0: - L1 ABI, where MAC and PHY API configuration are split. - ACL has been split to low-level TCAM and Counters ABI to provide more HW ACL capabilities for future driver versions. To support backward support, the addition compatibility layer is required in the driver which will have two different codebase under "if FW-VER elif FW-VER else" conditions that will be removed in the future anyway, So, the idea was to break backward support and focus on more stable FW instead of supporting old version with very minimal and limited set of features/capabilities. Improve FW msg validation: * Use __le64, __le32, __le16 types in msg to/from FW to catch endian mismatch by sparse. * Use BUILD_BUG_ON for structures sent/recv to/from FW. Co-developed-by: Vadym Kochan <vkochan@marvell.com> Signed-off-by: Vadym Kochan <vkochan@marvell.com> Signed-off-by: Yevhen Orlov <yevhen.orlov@plvision.eu> Signed-off-by: Taras Chornyi <tchornyi@marvell.com> Signed-off-by: Volodymyr Mytnyk <vmytnyk@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-29 13:38:07 +08:00
.dev = __cpu_to_le32(port->dev_id),
.port = __cpu_to_le32(port->hw_id),
},
net: marvell: prestera: add firmware v4.0 support Add firmware (FW) version 4.0 support for Marvell Prestera driver. Major changes have been made to new v4.0 FW ABI to add support of new features, introduce the stability of the FW ABI and ensure better forward compatibility for the future driver vesrions. Current v4.0 FW feature set support does not expect any changes to ABI, as it was defined and tested through long period of time. The ABI may be extended in case of new features, but it will not break the backward compatibility. ABI major changes done in v4.0: - L1 ABI, where MAC and PHY API configuration are split. - ACL has been split to low-level TCAM and Counters ABI to provide more HW ACL capabilities for future driver versions. To support backward support, the addition compatibility layer is required in the driver which will have two different codebase under "if FW-VER elif FW-VER else" conditions that will be removed in the future anyway, So, the idea was to break backward support and focus on more stable FW instead of supporting old version with very minimal and limited set of features/capabilities. Improve FW msg validation: * Use __le64, __le32, __le16 types in msg to/from FW to catch endian mismatch by sparse. * Use BUILD_BUG_ON for structures sent/recv to/from FW. Co-developed-by: Vadym Kochan <vkochan@marvell.com> Signed-off-by: Vadym Kochan <vkochan@marvell.com> Signed-off-by: Yevhen Orlov <yevhen.orlov@plvision.eu> Signed-off-by: Taras Chornyi <tchornyi@marvell.com> Signed-off-by: Volodymyr Mytnyk <vmytnyk@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-29 13:38:07 +08:00
.flush_mode = __cpu_to_le32(mode),
};
return prestera_cmd(port->sw, PRESTERA_CMD_TYPE_FDB_FLUSH_PORT,
&req.cmd, sizeof(req));
}
int prestera_hw_fdb_flush_vlan(struct prestera_switch *sw, u16 vid, u32 mode)
{
struct prestera_msg_fdb_req req = {
net: marvell: prestera: add firmware v4.0 support Add firmware (FW) version 4.0 support for Marvell Prestera driver. Major changes have been made to new v4.0 FW ABI to add support of new features, introduce the stability of the FW ABI and ensure better forward compatibility for the future driver vesrions. Current v4.0 FW feature set support does not expect any changes to ABI, as it was defined and tested through long period of time. The ABI may be extended in case of new features, but it will not break the backward compatibility. ABI major changes done in v4.0: - L1 ABI, where MAC and PHY API configuration are split. - ACL has been split to low-level TCAM and Counters ABI to provide more HW ACL capabilities for future driver versions. To support backward support, the addition compatibility layer is required in the driver which will have two different codebase under "if FW-VER elif FW-VER else" conditions that will be removed in the future anyway, So, the idea was to break backward support and focus on more stable FW instead of supporting old version with very minimal and limited set of features/capabilities. Improve FW msg validation: * Use __le64, __le32, __le16 types in msg to/from FW to catch endian mismatch by sparse. * Use BUILD_BUG_ON for structures sent/recv to/from FW. Co-developed-by: Vadym Kochan <vkochan@marvell.com> Signed-off-by: Vadym Kochan <vkochan@marvell.com> Signed-off-by: Yevhen Orlov <yevhen.orlov@plvision.eu> Signed-off-by: Taras Chornyi <tchornyi@marvell.com> Signed-off-by: Volodymyr Mytnyk <vmytnyk@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-29 13:38:07 +08:00
.vid = __cpu_to_le16(vid),
.flush_mode = __cpu_to_le32(mode),
};
return prestera_cmd(sw, PRESTERA_CMD_TYPE_FDB_FLUSH_VLAN,
&req.cmd, sizeof(req));
}
int prestera_hw_fdb_flush_port_vlan(struct prestera_port *port, u16 vid,
u32 mode)
{
struct prestera_msg_fdb_req req = {
.dest = {
net: marvell: prestera: add firmware v4.0 support Add firmware (FW) version 4.0 support for Marvell Prestera driver. Major changes have been made to new v4.0 FW ABI to add support of new features, introduce the stability of the FW ABI and ensure better forward compatibility for the future driver vesrions. Current v4.0 FW feature set support does not expect any changes to ABI, as it was defined and tested through long period of time. The ABI may be extended in case of new features, but it will not break the backward compatibility. ABI major changes done in v4.0: - L1 ABI, where MAC and PHY API configuration are split. - ACL has been split to low-level TCAM and Counters ABI to provide more HW ACL capabilities for future driver versions. To support backward support, the addition compatibility layer is required in the driver which will have two different codebase under "if FW-VER elif FW-VER else" conditions that will be removed in the future anyway, So, the idea was to break backward support and focus on more stable FW instead of supporting old version with very minimal and limited set of features/capabilities. Improve FW msg validation: * Use __le64, __le32, __le16 types in msg to/from FW to catch endian mismatch by sparse. * Use BUILD_BUG_ON for structures sent/recv to/from FW. Co-developed-by: Vadym Kochan <vkochan@marvell.com> Signed-off-by: Vadym Kochan <vkochan@marvell.com> Signed-off-by: Yevhen Orlov <yevhen.orlov@plvision.eu> Signed-off-by: Taras Chornyi <tchornyi@marvell.com> Signed-off-by: Volodymyr Mytnyk <vmytnyk@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-29 13:38:07 +08:00
.dev = __cpu_to_le32(port->dev_id),
.port = __cpu_to_le32(port->hw_id),
},
net: marvell: prestera: add firmware v4.0 support Add firmware (FW) version 4.0 support for Marvell Prestera driver. Major changes have been made to new v4.0 FW ABI to add support of new features, introduce the stability of the FW ABI and ensure better forward compatibility for the future driver vesrions. Current v4.0 FW feature set support does not expect any changes to ABI, as it was defined and tested through long period of time. The ABI may be extended in case of new features, but it will not break the backward compatibility. ABI major changes done in v4.0: - L1 ABI, where MAC and PHY API configuration are split. - ACL has been split to low-level TCAM and Counters ABI to provide more HW ACL capabilities for future driver versions. To support backward support, the addition compatibility layer is required in the driver which will have two different codebase under "if FW-VER elif FW-VER else" conditions that will be removed in the future anyway, So, the idea was to break backward support and focus on more stable FW instead of supporting old version with very minimal and limited set of features/capabilities. Improve FW msg validation: * Use __le64, __le32, __le16 types in msg to/from FW to catch endian mismatch by sparse. * Use BUILD_BUG_ON for structures sent/recv to/from FW. Co-developed-by: Vadym Kochan <vkochan@marvell.com> Signed-off-by: Vadym Kochan <vkochan@marvell.com> Signed-off-by: Yevhen Orlov <yevhen.orlov@plvision.eu> Signed-off-by: Taras Chornyi <tchornyi@marvell.com> Signed-off-by: Volodymyr Mytnyk <vmytnyk@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-29 13:38:07 +08:00
.vid = __cpu_to_le16(vid),
.flush_mode = __cpu_to_le32(mode),
};
return prestera_cmd(port->sw, PRESTERA_CMD_TYPE_FDB_FLUSH_PORT_VLAN,
&req.cmd, sizeof(req));
}
int prestera_hw_fdb_flush_lag(struct prestera_switch *sw, u16 lag_id,
u32 mode)
{
struct prestera_msg_fdb_req req = {
.dest_type = PRESTERA_HW_FDB_ENTRY_TYPE_LAG,
.dest = {
net: marvell: prestera: add firmware v4.0 support Add firmware (FW) version 4.0 support for Marvell Prestera driver. Major changes have been made to new v4.0 FW ABI to add support of new features, introduce the stability of the FW ABI and ensure better forward compatibility for the future driver vesrions. Current v4.0 FW feature set support does not expect any changes to ABI, as it was defined and tested through long period of time. The ABI may be extended in case of new features, but it will not break the backward compatibility. ABI major changes done in v4.0: - L1 ABI, where MAC and PHY API configuration are split. - ACL has been split to low-level TCAM and Counters ABI to provide more HW ACL capabilities for future driver versions. To support backward support, the addition compatibility layer is required in the driver which will have two different codebase under "if FW-VER elif FW-VER else" conditions that will be removed in the future anyway, So, the idea was to break backward support and focus on more stable FW instead of supporting old version with very minimal and limited set of features/capabilities. Improve FW msg validation: * Use __le64, __le32, __le16 types in msg to/from FW to catch endian mismatch by sparse. * Use BUILD_BUG_ON for structures sent/recv to/from FW. Co-developed-by: Vadym Kochan <vkochan@marvell.com> Signed-off-by: Vadym Kochan <vkochan@marvell.com> Signed-off-by: Yevhen Orlov <yevhen.orlov@plvision.eu> Signed-off-by: Taras Chornyi <tchornyi@marvell.com> Signed-off-by: Volodymyr Mytnyk <vmytnyk@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-29 13:38:07 +08:00
.lag_id = __cpu_to_le16(lag_id),
},
net: marvell: prestera: add firmware v4.0 support Add firmware (FW) version 4.0 support for Marvell Prestera driver. Major changes have been made to new v4.0 FW ABI to add support of new features, introduce the stability of the FW ABI and ensure better forward compatibility for the future driver vesrions. Current v4.0 FW feature set support does not expect any changes to ABI, as it was defined and tested through long period of time. The ABI may be extended in case of new features, but it will not break the backward compatibility. ABI major changes done in v4.0: - L1 ABI, where MAC and PHY API configuration are split. - ACL has been split to low-level TCAM and Counters ABI to provide more HW ACL capabilities for future driver versions. To support backward support, the addition compatibility layer is required in the driver which will have two different codebase under "if FW-VER elif FW-VER else" conditions that will be removed in the future anyway, So, the idea was to break backward support and focus on more stable FW instead of supporting old version with very minimal and limited set of features/capabilities. Improve FW msg validation: * Use __le64, __le32, __le16 types in msg to/from FW to catch endian mismatch by sparse. * Use BUILD_BUG_ON for structures sent/recv to/from FW. Co-developed-by: Vadym Kochan <vkochan@marvell.com> Signed-off-by: Vadym Kochan <vkochan@marvell.com> Signed-off-by: Yevhen Orlov <yevhen.orlov@plvision.eu> Signed-off-by: Taras Chornyi <tchornyi@marvell.com> Signed-off-by: Volodymyr Mytnyk <vmytnyk@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-29 13:38:07 +08:00
.flush_mode = __cpu_to_le32(mode),
};
return prestera_cmd(sw, PRESTERA_CMD_TYPE_FDB_FLUSH_PORT,
&req.cmd, sizeof(req));
}
int prestera_hw_fdb_flush_lag_vlan(struct prestera_switch *sw,
u16 lag_id, u16 vid, u32 mode)
{
struct prestera_msg_fdb_req req = {
.dest_type = PRESTERA_HW_FDB_ENTRY_TYPE_LAG,
.dest = {
net: marvell: prestera: add firmware v4.0 support Add firmware (FW) version 4.0 support for Marvell Prestera driver. Major changes have been made to new v4.0 FW ABI to add support of new features, introduce the stability of the FW ABI and ensure better forward compatibility for the future driver vesrions. Current v4.0 FW feature set support does not expect any changes to ABI, as it was defined and tested through long period of time. The ABI may be extended in case of new features, but it will not break the backward compatibility. ABI major changes done in v4.0: - L1 ABI, where MAC and PHY API configuration are split. - ACL has been split to low-level TCAM and Counters ABI to provide more HW ACL capabilities for future driver versions. To support backward support, the addition compatibility layer is required in the driver which will have two different codebase under "if FW-VER elif FW-VER else" conditions that will be removed in the future anyway, So, the idea was to break backward support and focus on more stable FW instead of supporting old version with very minimal and limited set of features/capabilities. Improve FW msg validation: * Use __le64, __le32, __le16 types in msg to/from FW to catch endian mismatch by sparse. * Use BUILD_BUG_ON for structures sent/recv to/from FW. Co-developed-by: Vadym Kochan <vkochan@marvell.com> Signed-off-by: Vadym Kochan <vkochan@marvell.com> Signed-off-by: Yevhen Orlov <yevhen.orlov@plvision.eu> Signed-off-by: Taras Chornyi <tchornyi@marvell.com> Signed-off-by: Volodymyr Mytnyk <vmytnyk@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-29 13:38:07 +08:00
.lag_id = __cpu_to_le16(lag_id),
},
net: marvell: prestera: add firmware v4.0 support Add firmware (FW) version 4.0 support for Marvell Prestera driver. Major changes have been made to new v4.0 FW ABI to add support of new features, introduce the stability of the FW ABI and ensure better forward compatibility for the future driver vesrions. Current v4.0 FW feature set support does not expect any changes to ABI, as it was defined and tested through long period of time. The ABI may be extended in case of new features, but it will not break the backward compatibility. ABI major changes done in v4.0: - L1 ABI, where MAC and PHY API configuration are split. - ACL has been split to low-level TCAM and Counters ABI to provide more HW ACL capabilities for future driver versions. To support backward support, the addition compatibility layer is required in the driver which will have two different codebase under "if FW-VER elif FW-VER else" conditions that will be removed in the future anyway, So, the idea was to break backward support and focus on more stable FW instead of supporting old version with very minimal and limited set of features/capabilities. Improve FW msg validation: * Use __le64, __le32, __le16 types in msg to/from FW to catch endian mismatch by sparse. * Use BUILD_BUG_ON for structures sent/recv to/from FW. Co-developed-by: Vadym Kochan <vkochan@marvell.com> Signed-off-by: Vadym Kochan <vkochan@marvell.com> Signed-off-by: Yevhen Orlov <yevhen.orlov@plvision.eu> Signed-off-by: Taras Chornyi <tchornyi@marvell.com> Signed-off-by: Volodymyr Mytnyk <vmytnyk@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-29 13:38:07 +08:00
.vid = __cpu_to_le16(vid),
.flush_mode = __cpu_to_le32(mode),
};
return prestera_cmd(sw, PRESTERA_CMD_TYPE_FDB_FLUSH_PORT_VLAN,
&req.cmd, sizeof(req));
}
int prestera_hw_bridge_create(struct prestera_switch *sw, u16 *bridge_id)
{
struct prestera_msg_bridge_resp resp;
struct prestera_msg_bridge_req req;
int err;
err = prestera_cmd_ret(sw, PRESTERA_CMD_TYPE_BRIDGE_CREATE,
&req.cmd, sizeof(req),
&resp.ret, sizeof(resp));
if (err)
return err;
net: marvell: prestera: add firmware v4.0 support Add firmware (FW) version 4.0 support for Marvell Prestera driver. Major changes have been made to new v4.0 FW ABI to add support of new features, introduce the stability of the FW ABI and ensure better forward compatibility for the future driver vesrions. Current v4.0 FW feature set support does not expect any changes to ABI, as it was defined and tested through long period of time. The ABI may be extended in case of new features, but it will not break the backward compatibility. ABI major changes done in v4.0: - L1 ABI, where MAC and PHY API configuration are split. - ACL has been split to low-level TCAM and Counters ABI to provide more HW ACL capabilities for future driver versions. To support backward support, the addition compatibility layer is required in the driver which will have two different codebase under "if FW-VER elif FW-VER else" conditions that will be removed in the future anyway, So, the idea was to break backward support and focus on more stable FW instead of supporting old version with very minimal and limited set of features/capabilities. Improve FW msg validation: * Use __le64, __le32, __le16 types in msg to/from FW to catch endian mismatch by sparse. * Use BUILD_BUG_ON for structures sent/recv to/from FW. Co-developed-by: Vadym Kochan <vkochan@marvell.com> Signed-off-by: Vadym Kochan <vkochan@marvell.com> Signed-off-by: Yevhen Orlov <yevhen.orlov@plvision.eu> Signed-off-by: Taras Chornyi <tchornyi@marvell.com> Signed-off-by: Volodymyr Mytnyk <vmytnyk@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-29 13:38:07 +08:00
*bridge_id = __le16_to_cpu(resp.bridge);
return 0;
}
int prestera_hw_bridge_delete(struct prestera_switch *sw, u16 bridge_id)
{
struct prestera_msg_bridge_req req = {
net: marvell: prestera: add firmware v4.0 support Add firmware (FW) version 4.0 support for Marvell Prestera driver. Major changes have been made to new v4.0 FW ABI to add support of new features, introduce the stability of the FW ABI and ensure better forward compatibility for the future driver vesrions. Current v4.0 FW feature set support does not expect any changes to ABI, as it was defined and tested through long period of time. The ABI may be extended in case of new features, but it will not break the backward compatibility. ABI major changes done in v4.0: - L1 ABI, where MAC and PHY API configuration are split. - ACL has been split to low-level TCAM and Counters ABI to provide more HW ACL capabilities for future driver versions. To support backward support, the addition compatibility layer is required in the driver which will have two different codebase under "if FW-VER elif FW-VER else" conditions that will be removed in the future anyway, So, the idea was to break backward support and focus on more stable FW instead of supporting old version with very minimal and limited set of features/capabilities. Improve FW msg validation: * Use __le64, __le32, __le16 types in msg to/from FW to catch endian mismatch by sparse. * Use BUILD_BUG_ON for structures sent/recv to/from FW. Co-developed-by: Vadym Kochan <vkochan@marvell.com> Signed-off-by: Vadym Kochan <vkochan@marvell.com> Signed-off-by: Yevhen Orlov <yevhen.orlov@plvision.eu> Signed-off-by: Taras Chornyi <tchornyi@marvell.com> Signed-off-by: Volodymyr Mytnyk <vmytnyk@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-29 13:38:07 +08:00
.bridge = __cpu_to_le16(bridge_id),
};
return prestera_cmd(sw, PRESTERA_CMD_TYPE_BRIDGE_DELETE,
&req.cmd, sizeof(req));
}
int prestera_hw_bridge_port_add(struct prestera_port *port, u16 bridge_id)
{
struct prestera_msg_bridge_req req = {
net: marvell: prestera: add firmware v4.0 support Add firmware (FW) version 4.0 support for Marvell Prestera driver. Major changes have been made to new v4.0 FW ABI to add support of new features, introduce the stability of the FW ABI and ensure better forward compatibility for the future driver vesrions. Current v4.0 FW feature set support does not expect any changes to ABI, as it was defined and tested through long period of time. The ABI may be extended in case of new features, but it will not break the backward compatibility. ABI major changes done in v4.0: - L1 ABI, where MAC and PHY API configuration are split. - ACL has been split to low-level TCAM and Counters ABI to provide more HW ACL capabilities for future driver versions. To support backward support, the addition compatibility layer is required in the driver which will have two different codebase under "if FW-VER elif FW-VER else" conditions that will be removed in the future anyway, So, the idea was to break backward support and focus on more stable FW instead of supporting old version with very minimal and limited set of features/capabilities. Improve FW msg validation: * Use __le64, __le32, __le16 types in msg to/from FW to catch endian mismatch by sparse. * Use BUILD_BUG_ON for structures sent/recv to/from FW. Co-developed-by: Vadym Kochan <vkochan@marvell.com> Signed-off-by: Vadym Kochan <vkochan@marvell.com> Signed-off-by: Yevhen Orlov <yevhen.orlov@plvision.eu> Signed-off-by: Taras Chornyi <tchornyi@marvell.com> Signed-off-by: Volodymyr Mytnyk <vmytnyk@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-29 13:38:07 +08:00
.bridge = __cpu_to_le16(bridge_id),
.port = __cpu_to_le32(port->hw_id),
.dev = __cpu_to_le32(port->dev_id),
};
return prestera_cmd(port->sw, PRESTERA_CMD_TYPE_BRIDGE_PORT_ADD,
&req.cmd, sizeof(req));
}
int prestera_hw_bridge_port_delete(struct prestera_port *port, u16 bridge_id)
{
struct prestera_msg_bridge_req req = {
net: marvell: prestera: add firmware v4.0 support Add firmware (FW) version 4.0 support for Marvell Prestera driver. Major changes have been made to new v4.0 FW ABI to add support of new features, introduce the stability of the FW ABI and ensure better forward compatibility for the future driver vesrions. Current v4.0 FW feature set support does not expect any changes to ABI, as it was defined and tested through long period of time. The ABI may be extended in case of new features, but it will not break the backward compatibility. ABI major changes done in v4.0: - L1 ABI, where MAC and PHY API configuration are split. - ACL has been split to low-level TCAM and Counters ABI to provide more HW ACL capabilities for future driver versions. To support backward support, the addition compatibility layer is required in the driver which will have two different codebase under "if FW-VER elif FW-VER else" conditions that will be removed in the future anyway, So, the idea was to break backward support and focus on more stable FW instead of supporting old version with very minimal and limited set of features/capabilities. Improve FW msg validation: * Use __le64, __le32, __le16 types in msg to/from FW to catch endian mismatch by sparse. * Use BUILD_BUG_ON for structures sent/recv to/from FW. Co-developed-by: Vadym Kochan <vkochan@marvell.com> Signed-off-by: Vadym Kochan <vkochan@marvell.com> Signed-off-by: Yevhen Orlov <yevhen.orlov@plvision.eu> Signed-off-by: Taras Chornyi <tchornyi@marvell.com> Signed-off-by: Volodymyr Mytnyk <vmytnyk@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-29 13:38:07 +08:00
.bridge = __cpu_to_le16(bridge_id),
.port = __cpu_to_le32(port->hw_id),
.dev = __cpu_to_le32(port->dev_id),
};
return prestera_cmd(port->sw, PRESTERA_CMD_TYPE_BRIDGE_PORT_DELETE,
&req.cmd, sizeof(req));
}
static int prestera_iface_to_msg(struct prestera_iface *iface,
struct prestera_msg_iface *msg_if)
{
switch (iface->type) {
case PRESTERA_IF_PORT_E:
case PRESTERA_IF_VID_E:
msg_if->port = __cpu_to_le32(iface->dev_port.port_num);
msg_if->dev = __cpu_to_le32(iface->dev_port.hw_dev_num);
break;
case PRESTERA_IF_LAG_E:
msg_if->lag_id = __cpu_to_le16(iface->lag_id);
break;
default:
return -EOPNOTSUPP;
}
msg_if->vr_id = __cpu_to_le16(iface->vr_id);
msg_if->vid = __cpu_to_le16(iface->vlan_id);
msg_if->type = iface->type;
return 0;
}
int prestera_hw_rif_create(struct prestera_switch *sw,
struct prestera_iface *iif, u8 *mac, u16 *rif_id)
{
struct prestera_msg_rif_resp resp;
struct prestera_msg_rif_req req;
int err;
memcpy(req.mac, mac, ETH_ALEN);
err = prestera_iface_to_msg(iif, &req.iif);
if (err)
return err;
err = prestera_cmd_ret(sw, PRESTERA_CMD_TYPE_ROUTER_RIF_CREATE,
&req.cmd, sizeof(req), &resp.ret, sizeof(resp));
if (err)
return err;
*rif_id = __le16_to_cpu(resp.rif_id);
return err;
}
int prestera_hw_rif_delete(struct prestera_switch *sw, u16 rif_id,
struct prestera_iface *iif)
{
struct prestera_msg_rif_req req = {
.rif_id = __cpu_to_le16(rif_id),
};
int err;
err = prestera_iface_to_msg(iif, &req.iif);
if (err)
return err;
return prestera_cmd(sw, PRESTERA_CMD_TYPE_ROUTER_RIF_DELETE, &req.cmd,
sizeof(req));
}
int prestera_hw_vr_create(struct prestera_switch *sw, u16 *vr_id)
{
struct prestera_msg_vr_resp resp;
struct prestera_msg_vr_req req;
int err;
err = prestera_cmd_ret(sw, PRESTERA_CMD_TYPE_ROUTER_VR_CREATE,
&req.cmd, sizeof(req), &resp.ret, sizeof(resp));
if (err)
return err;
*vr_id = __le16_to_cpu(resp.vr_id);
return err;
}
int prestera_hw_vr_delete(struct prestera_switch *sw, u16 vr_id)
{
struct prestera_msg_vr_req req = {
.vr_id = __cpu_to_le16(vr_id),
};
return prestera_cmd(sw, PRESTERA_CMD_TYPE_ROUTER_VR_DELETE, &req.cmd,
sizeof(req));
}
int prestera_hw_lpm_add(struct prestera_switch *sw, u16 vr_id,
__be32 dst, u32 dst_len, u32 grp_id)
{
struct prestera_msg_lpm_req req = {
.dst_len = __cpu_to_le32(dst_len),
.vr_id = __cpu_to_le16(vr_id),
.grp_id = __cpu_to_le32(grp_id),
.dst.u.ipv4 = dst
};
return prestera_cmd(sw, PRESTERA_CMD_TYPE_ROUTER_LPM_ADD, &req.cmd,
sizeof(req));
}
int prestera_hw_lpm_del(struct prestera_switch *sw, u16 vr_id,
__be32 dst, u32 dst_len)
{
struct prestera_msg_lpm_req req = {
.dst_len = __cpu_to_le32(dst_len),
.vr_id = __cpu_to_le16(vr_id),
.dst.u.ipv4 = dst
};
return prestera_cmd(sw, PRESTERA_CMD_TYPE_ROUTER_LPM_DELETE, &req.cmd,
sizeof(req));
}
net: marvell: prestera: Add driver for Prestera family ASIC devices Marvell Prestera 98DX326x integrates up to 24 ports of 1GbE with 8 ports of 10GbE uplinks or 2 ports of 40Gbps stacking for a largely wireless SMB deployment. The current implementation supports only boards designed for the Marvell Switchdev solution and requires special firmware. The core Prestera switching logic is implemented in prestera_main.c, there is an intermediate hw layer between core logic and firmware. It is implemented in prestera_hw.c, the purpose of it is to encapsulate hw related logic, in future there is a plan to support more devices with different HW related configurations. This patch contains only basic switch initialization and RX/TX support over SDMA mechanism. Currently supported devices have DMA access range <= 32bit and require ZONE_DMA to be enabled, for such cases SDMA driver checks if the skb allocated in proper range supported by the Prestera device. Also meanwhile there is no TX interrupt support in current firmware version so recycling work is scheduled on each xmit. Port's mac address is generated from the switch base mac which may be provided via device-tree (static one or as nvme cell), or randomly generated. This is required by the firmware. Co-developed-by: Andrii Savka <andrii.savka@plvision.eu> Signed-off-by: Andrii Savka <andrii.savka@plvision.eu> Co-developed-by: Oleksandr Mazur <oleksandr.mazur@plvision.eu> Signed-off-by: Oleksandr Mazur <oleksandr.mazur@plvision.eu> Co-developed-by: Serhiy Boiko <serhiy.boiko@plvision.eu> Signed-off-by: Serhiy Boiko <serhiy.boiko@plvision.eu> Co-developed-by: Serhiy Pshyk <serhiy.pshyk@plvision.eu> Signed-off-by: Serhiy Pshyk <serhiy.pshyk@plvision.eu> Co-developed-by: Taras Chornyi <taras.chornyi@plvision.eu> Signed-off-by: Taras Chornyi <taras.chornyi@plvision.eu> Co-developed-by: Volodymyr Mytnyk <volodymyr.mytnyk@plvision.eu> Signed-off-by: Volodymyr Mytnyk <volodymyr.mytnyk@plvision.eu> Signed-off-by: Vadym Kochan <vadym.kochan@plvision.eu> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-17 00:30:57 +08:00
int prestera_hw_rxtx_init(struct prestera_switch *sw,
struct prestera_rxtx_params *params)
{
struct prestera_msg_rxtx_resp resp;
struct prestera_msg_rxtx_req req;
int err;
req.use_sdma = params->use_sdma;
err = prestera_cmd_ret(sw, PRESTERA_CMD_TYPE_RXTX_INIT,
&req.cmd, sizeof(req), &resp.ret, sizeof(resp));
if (err)
return err;
net: marvell: prestera: add firmware v4.0 support Add firmware (FW) version 4.0 support for Marvell Prestera driver. Major changes have been made to new v4.0 FW ABI to add support of new features, introduce the stability of the FW ABI and ensure better forward compatibility for the future driver vesrions. Current v4.0 FW feature set support does not expect any changes to ABI, as it was defined and tested through long period of time. The ABI may be extended in case of new features, but it will not break the backward compatibility. ABI major changes done in v4.0: - L1 ABI, where MAC and PHY API configuration are split. - ACL has been split to low-level TCAM and Counters ABI to provide more HW ACL capabilities for future driver versions. To support backward support, the addition compatibility layer is required in the driver which will have two different codebase under "if FW-VER elif FW-VER else" conditions that will be removed in the future anyway, So, the idea was to break backward support and focus on more stable FW instead of supporting old version with very minimal and limited set of features/capabilities. Improve FW msg validation: * Use __le64, __le32, __le16 types in msg to/from FW to catch endian mismatch by sparse. * Use BUILD_BUG_ON for structures sent/recv to/from FW. Co-developed-by: Vadym Kochan <vkochan@marvell.com> Signed-off-by: Vadym Kochan <vkochan@marvell.com> Signed-off-by: Yevhen Orlov <yevhen.orlov@plvision.eu> Signed-off-by: Taras Chornyi <tchornyi@marvell.com> Signed-off-by: Volodymyr Mytnyk <vmytnyk@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-29 13:38:07 +08:00
params->map_addr = __le32_to_cpu(resp.map_addr);
net: marvell: prestera: Add driver for Prestera family ASIC devices Marvell Prestera 98DX326x integrates up to 24 ports of 1GbE with 8 ports of 10GbE uplinks or 2 ports of 40Gbps stacking for a largely wireless SMB deployment. The current implementation supports only boards designed for the Marvell Switchdev solution and requires special firmware. The core Prestera switching logic is implemented in prestera_main.c, there is an intermediate hw layer between core logic and firmware. It is implemented in prestera_hw.c, the purpose of it is to encapsulate hw related logic, in future there is a plan to support more devices with different HW related configurations. This patch contains only basic switch initialization and RX/TX support over SDMA mechanism. Currently supported devices have DMA access range <= 32bit and require ZONE_DMA to be enabled, for such cases SDMA driver checks if the skb allocated in proper range supported by the Prestera device. Also meanwhile there is no TX interrupt support in current firmware version so recycling work is scheduled on each xmit. Port's mac address is generated from the switch base mac which may be provided via device-tree (static one or as nvme cell), or randomly generated. This is required by the firmware. Co-developed-by: Andrii Savka <andrii.savka@plvision.eu> Signed-off-by: Andrii Savka <andrii.savka@plvision.eu> Co-developed-by: Oleksandr Mazur <oleksandr.mazur@plvision.eu> Signed-off-by: Oleksandr Mazur <oleksandr.mazur@plvision.eu> Co-developed-by: Serhiy Boiko <serhiy.boiko@plvision.eu> Signed-off-by: Serhiy Boiko <serhiy.boiko@plvision.eu> Co-developed-by: Serhiy Pshyk <serhiy.pshyk@plvision.eu> Signed-off-by: Serhiy Pshyk <serhiy.pshyk@plvision.eu> Co-developed-by: Taras Chornyi <taras.chornyi@plvision.eu> Signed-off-by: Taras Chornyi <taras.chornyi@plvision.eu> Co-developed-by: Volodymyr Mytnyk <volodymyr.mytnyk@plvision.eu> Signed-off-by: Volodymyr Mytnyk <volodymyr.mytnyk@plvision.eu> Signed-off-by: Vadym Kochan <vadym.kochan@plvision.eu> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-17 00:30:57 +08:00
return 0;
}
int prestera_hw_lag_member_add(struct prestera_port *port, u16 lag_id)
{
struct prestera_msg_lag_req req = {
net: marvell: prestera: add firmware v4.0 support Add firmware (FW) version 4.0 support for Marvell Prestera driver. Major changes have been made to new v4.0 FW ABI to add support of new features, introduce the stability of the FW ABI and ensure better forward compatibility for the future driver vesrions. Current v4.0 FW feature set support does not expect any changes to ABI, as it was defined and tested through long period of time. The ABI may be extended in case of new features, but it will not break the backward compatibility. ABI major changes done in v4.0: - L1 ABI, where MAC and PHY API configuration are split. - ACL has been split to low-level TCAM and Counters ABI to provide more HW ACL capabilities for future driver versions. To support backward support, the addition compatibility layer is required in the driver which will have two different codebase under "if FW-VER elif FW-VER else" conditions that will be removed in the future anyway, So, the idea was to break backward support and focus on more stable FW instead of supporting old version with very minimal and limited set of features/capabilities. Improve FW msg validation: * Use __le64, __le32, __le16 types in msg to/from FW to catch endian mismatch by sparse. * Use BUILD_BUG_ON for structures sent/recv to/from FW. Co-developed-by: Vadym Kochan <vkochan@marvell.com> Signed-off-by: Vadym Kochan <vkochan@marvell.com> Signed-off-by: Yevhen Orlov <yevhen.orlov@plvision.eu> Signed-off-by: Taras Chornyi <tchornyi@marvell.com> Signed-off-by: Volodymyr Mytnyk <vmytnyk@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-29 13:38:07 +08:00
.port = __cpu_to_le32(port->hw_id),
.dev = __cpu_to_le32(port->dev_id),
.lag_id = __cpu_to_le16(lag_id),
};
return prestera_cmd(port->sw, PRESTERA_CMD_TYPE_LAG_MEMBER_ADD,
&req.cmd, sizeof(req));
}
int prestera_hw_lag_member_del(struct prestera_port *port, u16 lag_id)
{
struct prestera_msg_lag_req req = {
net: marvell: prestera: add firmware v4.0 support Add firmware (FW) version 4.0 support for Marvell Prestera driver. Major changes have been made to new v4.0 FW ABI to add support of new features, introduce the stability of the FW ABI and ensure better forward compatibility for the future driver vesrions. Current v4.0 FW feature set support does not expect any changes to ABI, as it was defined and tested through long period of time. The ABI may be extended in case of new features, but it will not break the backward compatibility. ABI major changes done in v4.0: - L1 ABI, where MAC and PHY API configuration are split. - ACL has been split to low-level TCAM and Counters ABI to provide more HW ACL capabilities for future driver versions. To support backward support, the addition compatibility layer is required in the driver which will have two different codebase under "if FW-VER elif FW-VER else" conditions that will be removed in the future anyway, So, the idea was to break backward support and focus on more stable FW instead of supporting old version with very minimal and limited set of features/capabilities. Improve FW msg validation: * Use __le64, __le32, __le16 types in msg to/from FW to catch endian mismatch by sparse. * Use BUILD_BUG_ON for structures sent/recv to/from FW. Co-developed-by: Vadym Kochan <vkochan@marvell.com> Signed-off-by: Vadym Kochan <vkochan@marvell.com> Signed-off-by: Yevhen Orlov <yevhen.orlov@plvision.eu> Signed-off-by: Taras Chornyi <tchornyi@marvell.com> Signed-off-by: Volodymyr Mytnyk <vmytnyk@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-29 13:38:07 +08:00
.port = __cpu_to_le32(port->hw_id),
.dev = __cpu_to_le32(port->dev_id),
.lag_id = __cpu_to_le16(lag_id),
};
return prestera_cmd(port->sw, PRESTERA_CMD_TYPE_LAG_MEMBER_DELETE,
&req.cmd, sizeof(req));
}
int prestera_hw_lag_member_enable(struct prestera_port *port, u16 lag_id,
bool enable)
{
struct prestera_msg_lag_req req = {
net: marvell: prestera: add firmware v4.0 support Add firmware (FW) version 4.0 support for Marvell Prestera driver. Major changes have been made to new v4.0 FW ABI to add support of new features, introduce the stability of the FW ABI and ensure better forward compatibility for the future driver vesrions. Current v4.0 FW feature set support does not expect any changes to ABI, as it was defined and tested through long period of time. The ABI may be extended in case of new features, but it will not break the backward compatibility. ABI major changes done in v4.0: - L1 ABI, where MAC and PHY API configuration are split. - ACL has been split to low-level TCAM and Counters ABI to provide more HW ACL capabilities for future driver versions. To support backward support, the addition compatibility layer is required in the driver which will have two different codebase under "if FW-VER elif FW-VER else" conditions that will be removed in the future anyway, So, the idea was to break backward support and focus on more stable FW instead of supporting old version with very minimal and limited set of features/capabilities. Improve FW msg validation: * Use __le64, __le32, __le16 types in msg to/from FW to catch endian mismatch by sparse. * Use BUILD_BUG_ON for structures sent/recv to/from FW. Co-developed-by: Vadym Kochan <vkochan@marvell.com> Signed-off-by: Vadym Kochan <vkochan@marvell.com> Signed-off-by: Yevhen Orlov <yevhen.orlov@plvision.eu> Signed-off-by: Taras Chornyi <tchornyi@marvell.com> Signed-off-by: Volodymyr Mytnyk <vmytnyk@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-29 13:38:07 +08:00
.port = __cpu_to_le32(port->hw_id),
.dev = __cpu_to_le32(port->dev_id),
.lag_id = __cpu_to_le16(lag_id),
};
u32 cmd;
cmd = enable ? PRESTERA_CMD_TYPE_LAG_MEMBER_ENABLE :
PRESTERA_CMD_TYPE_LAG_MEMBER_DISABLE;
return prestera_cmd(port->sw, cmd, &req.cmd, sizeof(req));
}
int
prestera_hw_cpu_code_counters_get(struct prestera_switch *sw, u8 code,
enum prestera_hw_cpu_code_cnt_t counter_type,
u64 *packet_count)
{
struct prestera_msg_cpu_code_counter_req req = {
.counter_type = counter_type,
.code = code,
};
struct mvsw_msg_cpu_code_counter_ret resp;
int err;
err = prestera_cmd_ret(sw, PRESTERA_CMD_TYPE_CPU_CODE_COUNTERS_GET,
&req.cmd, sizeof(req), &resp.ret, sizeof(resp));
if (err)
return err;
net: marvell: prestera: add firmware v4.0 support Add firmware (FW) version 4.0 support for Marvell Prestera driver. Major changes have been made to new v4.0 FW ABI to add support of new features, introduce the stability of the FW ABI and ensure better forward compatibility for the future driver vesrions. Current v4.0 FW feature set support does not expect any changes to ABI, as it was defined and tested through long period of time. The ABI may be extended in case of new features, but it will not break the backward compatibility. ABI major changes done in v4.0: - L1 ABI, where MAC and PHY API configuration are split. - ACL has been split to low-level TCAM and Counters ABI to provide more HW ACL capabilities for future driver versions. To support backward support, the addition compatibility layer is required in the driver which will have two different codebase under "if FW-VER elif FW-VER else" conditions that will be removed in the future anyway, So, the idea was to break backward support and focus on more stable FW instead of supporting old version with very minimal and limited set of features/capabilities. Improve FW msg validation: * Use __le64, __le32, __le16 types in msg to/from FW to catch endian mismatch by sparse. * Use BUILD_BUG_ON for structures sent/recv to/from FW. Co-developed-by: Vadym Kochan <vkochan@marvell.com> Signed-off-by: Vadym Kochan <vkochan@marvell.com> Signed-off-by: Yevhen Orlov <yevhen.orlov@plvision.eu> Signed-off-by: Taras Chornyi <tchornyi@marvell.com> Signed-off-by: Volodymyr Mytnyk <vmytnyk@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-29 13:38:07 +08:00
*packet_count = __le64_to_cpu(resp.packet_count);
return 0;
}
net: marvell: prestera: Add driver for Prestera family ASIC devices Marvell Prestera 98DX326x integrates up to 24 ports of 1GbE with 8 ports of 10GbE uplinks or 2 ports of 40Gbps stacking for a largely wireless SMB deployment. The current implementation supports only boards designed for the Marvell Switchdev solution and requires special firmware. The core Prestera switching logic is implemented in prestera_main.c, there is an intermediate hw layer between core logic and firmware. It is implemented in prestera_hw.c, the purpose of it is to encapsulate hw related logic, in future there is a plan to support more devices with different HW related configurations. This patch contains only basic switch initialization and RX/TX support over SDMA mechanism. Currently supported devices have DMA access range <= 32bit and require ZONE_DMA to be enabled, for such cases SDMA driver checks if the skb allocated in proper range supported by the Prestera device. Also meanwhile there is no TX interrupt support in current firmware version so recycling work is scheduled on each xmit. Port's mac address is generated from the switch base mac which may be provided via device-tree (static one or as nvme cell), or randomly generated. This is required by the firmware. Co-developed-by: Andrii Savka <andrii.savka@plvision.eu> Signed-off-by: Andrii Savka <andrii.savka@plvision.eu> Co-developed-by: Oleksandr Mazur <oleksandr.mazur@plvision.eu> Signed-off-by: Oleksandr Mazur <oleksandr.mazur@plvision.eu> Co-developed-by: Serhiy Boiko <serhiy.boiko@plvision.eu> Signed-off-by: Serhiy Boiko <serhiy.boiko@plvision.eu> Co-developed-by: Serhiy Pshyk <serhiy.pshyk@plvision.eu> Signed-off-by: Serhiy Pshyk <serhiy.pshyk@plvision.eu> Co-developed-by: Taras Chornyi <taras.chornyi@plvision.eu> Signed-off-by: Taras Chornyi <taras.chornyi@plvision.eu> Co-developed-by: Volodymyr Mytnyk <volodymyr.mytnyk@plvision.eu> Signed-off-by: Volodymyr Mytnyk <volodymyr.mytnyk@plvision.eu> Signed-off-by: Vadym Kochan <vadym.kochan@plvision.eu> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-17 00:30:57 +08:00
int prestera_hw_event_handler_register(struct prestera_switch *sw,
enum prestera_event_type type,
prestera_event_cb_t fn,
void *arg)
{
struct prestera_fw_event_handler *eh;
eh = __find_event_handler(sw, type);
if (eh)
return -EEXIST;
eh = kmalloc(sizeof(*eh), GFP_KERNEL);
if (!eh)
return -ENOMEM;
eh->type = type;
eh->func = fn;
eh->arg = arg;
INIT_LIST_HEAD(&eh->list);
list_add_rcu(&eh->list, &sw->event_handlers);
return 0;
}
void prestera_hw_event_handler_unregister(struct prestera_switch *sw,
enum prestera_event_type type,
prestera_event_cb_t fn)
{
struct prestera_fw_event_handler *eh;
eh = __find_event_handler(sw, type);
if (!eh)
return;
list_del_rcu(&eh->list);
kfree_rcu(eh, rcu);
}
int prestera_hw_counter_trigger(struct prestera_switch *sw, u32 block_id)
{
struct prestera_msg_counter_req req = {
.block_id = __cpu_to_le32(block_id)
};
return prestera_cmd(sw, PRESTERA_CMD_TYPE_COUNTER_TRIGGER,
&req.cmd, sizeof(req));
}
int prestera_hw_counter_abort(struct prestera_switch *sw)
{
struct prestera_msg_counter_req req;
return prestera_cmd(sw, PRESTERA_CMD_TYPE_COUNTER_ABORT,
&req.cmd, sizeof(req));
}
int prestera_hw_counters_get(struct prestera_switch *sw, u32 idx,
u32 *len, bool *done,
struct prestera_counter_stats *stats)
{
struct prestera_msg_counter_resp *resp;
struct prestera_msg_counter_req req = {
.block_id = __cpu_to_le32(idx),
.num_counters = __cpu_to_le32(*len),
};
size_t size = struct_size(resp, stats, *len);
int err, i;
resp = kmalloc(size, GFP_KERNEL);
if (!resp)
return -ENOMEM;
err = prestera_cmd_ret(sw, PRESTERA_CMD_TYPE_COUNTER_GET,
&req.cmd, sizeof(req), &resp->ret, size);
if (err)
goto free_buff;
for (i = 0; i < __le32_to_cpu(resp->num_counters); i++) {
stats[i].packets += __le64_to_cpu(resp->stats[i].packets);
stats[i].bytes += __le64_to_cpu(resp->stats[i].bytes);
}
*len = __le32_to_cpu(resp->num_counters);
*done = __le32_to_cpu(resp->done);
free_buff:
kfree(resp);
return err;
}
int prestera_hw_counter_block_get(struct prestera_switch *sw,
u32 client, u32 *block_id, u32 *offset,
u32 *num_counters)
{
struct prestera_msg_counter_resp resp;
struct prestera_msg_counter_req req = {
.client = __cpu_to_le32(client)
};
int err;
err = prestera_cmd_ret(sw, PRESTERA_CMD_TYPE_COUNTER_BLOCK_GET,
&req.cmd, sizeof(req), &resp.ret, sizeof(resp));
if (err)
return err;
*block_id = __le32_to_cpu(resp.block_id);
*offset = __le32_to_cpu(resp.offset);
*num_counters = __le32_to_cpu(resp.num_counters);
return 0;
}
int prestera_hw_counter_block_release(struct prestera_switch *sw,
u32 block_id)
{
struct prestera_msg_counter_req req = {
.block_id = __cpu_to_le32(block_id)
};
return prestera_cmd(sw, PRESTERA_CMD_TYPE_COUNTER_BLOCK_RELEASE,
&req.cmd, sizeof(req));
}
int prestera_hw_counter_clear(struct prestera_switch *sw, u32 block_id,
u32 counter_id)
{
struct prestera_msg_counter_req req = {
.block_id = __cpu_to_le32(block_id),
.num_counters = __cpu_to_le32(counter_id)
};
return prestera_cmd(sw, PRESTERA_CMD_TYPE_COUNTER_CLEAR,
&req.cmd, sizeof(req));
}