2014-11-24 22:35:11 +08:00
|
|
|
/*
|
2016-12-20 23:11:47 +08:00
|
|
|
* Copyright (C) 2013-2017 ARM Limited, All Rights Reserved.
|
2014-11-24 22:35:11 +08:00
|
|
|
* Author: Marc Zyngier <marc.zyngier@arm.com>
|
|
|
|
*
|
|
|
|
* This program is free software; you can redistribute it and/or modify
|
|
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
|
|
* published by the Free Software Foundation.
|
|
|
|
*
|
|
|
|
* This program is distributed in the hope that it will be useful,
|
|
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
|
|
* GNU General Public License for more details.
|
|
|
|
*
|
|
|
|
* You should have received a copy of the GNU General Public License
|
|
|
|
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|
|
|
*/
|
|
|
|
|
2016-09-13 02:32:25 +08:00
|
|
|
#include <linux/acpi.h>
|
2017-03-07 20:39:59 +08:00
|
|
|
#include <linux/acpi_iort.h>
|
2014-11-24 22:35:11 +08:00
|
|
|
#include <linux/bitmap.h>
|
|
|
|
#include <linux/cpu.h>
|
|
|
|
#include <linux/delay.h>
|
2016-09-13 00:13:59 +08:00
|
|
|
#include <linux/dma-iommu.h>
|
2014-11-24 22:35:11 +08:00
|
|
|
#include <linux/interrupt.h>
|
2016-09-13 02:32:25 +08:00
|
|
|
#include <linux/irqdomain.h>
|
2014-11-24 22:35:11 +08:00
|
|
|
#include <linux/log2.h>
|
|
|
|
#include <linux/mm.h>
|
|
|
|
#include <linux/msi.h>
|
|
|
|
#include <linux/of.h>
|
|
|
|
#include <linux/of_address.h>
|
|
|
|
#include <linux/of_irq.h>
|
|
|
|
#include <linux/of_pci.h>
|
|
|
|
#include <linux/of_platform.h>
|
|
|
|
#include <linux/percpu.h>
|
|
|
|
#include <linux/slab.h>
|
|
|
|
|
2015-07-08 05:11:46 +08:00
|
|
|
#include <linux/irqchip.h>
|
2014-11-24 22:35:11 +08:00
|
|
|
#include <linux/irqchip/arm-gic-v3.h>
|
2016-12-20 17:31:20 +08:00
|
|
|
#include <linux/irqchip/arm-gic-v4.h>
|
2014-11-24 22:35:11 +08:00
|
|
|
|
|
|
|
#include <asm/cputype.h>
|
|
|
|
#include <asm/exception.h>
|
|
|
|
|
2015-09-22 04:58:37 +08:00
|
|
|
#include "irq-gic-common.h"
|
|
|
|
|
2015-09-22 04:58:38 +08:00
|
|
|
#define ITS_FLAGS_CMDQ_NEEDS_FLUSHING (1ULL << 0)
|
|
|
|
#define ITS_FLAGS_WORKAROUND_CAVIUM_22375 (1ULL << 1)
|
2016-05-25 21:29:20 +08:00
|
|
|
#define ITS_FLAGS_WORKAROUND_CAVIUM_23144 (1ULL << 2)
|
2014-11-24 22:35:11 +08:00
|
|
|
|
2014-11-24 22:35:12 +08:00
|
|
|
#define RDIST_FLAGS_PROPBASE_NEEDS_FLUSHING (1 << 0)
|
|
|
|
|
2016-12-20 01:15:24 +08:00
|
|
|
static u32 lpi_id_bits;
|
|
|
|
|
|
|
|
/*
|
|
|
|
* We allocate memory for PROPBASE to cover 2 ^ lpi_id_bits LPIs to
|
|
|
|
* deal with (one configuration byte per interrupt). PENDBASE has to
|
|
|
|
* be 64kB aligned (one bit per LPI, plus 8192 bits for SPI/PPI/SGI).
|
|
|
|
*/
|
|
|
|
#define LPI_NRBITS lpi_id_bits
|
|
|
|
#define LPI_PROPBASE_SZ ALIGN(BIT(LPI_NRBITS), SZ_64K)
|
|
|
|
#define LPI_PENDBASE_SZ ALIGN(BIT(LPI_NRBITS) / 8, SZ_64K)
|
|
|
|
|
|
|
|
#define LPI_PROP_DEFAULT_PRIO 0xa0
|
|
|
|
|
2014-11-24 22:35:11 +08:00
|
|
|
/*
|
|
|
|
* Collection structure - just an ID, and a redistributor address to
|
|
|
|
* ping. We use one per CPU as a bag of interrupts assigned to this
|
|
|
|
* CPU.
|
|
|
|
*/
|
|
|
|
struct its_collection {
|
|
|
|
u64 target_address;
|
|
|
|
u16 col_id;
|
|
|
|
};
|
|
|
|
|
2016-03-10 12:10:49 +08:00
|
|
|
/*
|
2016-06-07 07:17:30 +08:00
|
|
|
* The ITS_BASER structure - contains memory information, cached
|
|
|
|
* value of BASER register configuration and ITS page size.
|
2016-03-10 12:10:49 +08:00
|
|
|
*/
|
|
|
|
struct its_baser {
|
|
|
|
void *base;
|
|
|
|
u64 val;
|
|
|
|
u32 order;
|
2016-06-07 07:17:30 +08:00
|
|
|
u32 psz;
|
2016-03-10 12:10:49 +08:00
|
|
|
};
|
|
|
|
|
2014-11-24 22:35:11 +08:00
|
|
|
/*
|
|
|
|
* The ITS structure - contains most of the infrastructure, with the
|
2015-07-28 21:46:20 +08:00
|
|
|
* top-level MSI domain, the command queue, the collections, and the
|
|
|
|
* list of devices writing to it.
|
2014-11-24 22:35:11 +08:00
|
|
|
*/
|
|
|
|
struct its_node {
|
|
|
|
raw_spinlock_t lock;
|
|
|
|
struct list_head entry;
|
|
|
|
void __iomem *base;
|
2016-09-13 02:32:24 +08:00
|
|
|
phys_addr_t phys_base;
|
2014-11-24 22:35:11 +08:00
|
|
|
struct its_cmd_block *cmd_base;
|
|
|
|
struct its_cmd_block *cmd_write;
|
2016-03-10 12:10:49 +08:00
|
|
|
struct its_baser tables[GITS_BASER_NR_REGS];
|
2014-11-24 22:35:11 +08:00
|
|
|
struct its_collection *collections;
|
|
|
|
struct list_head its_device_list;
|
|
|
|
u64 flags;
|
|
|
|
u32 ite_size;
|
2016-03-10 12:10:49 +08:00
|
|
|
u32 device_ids;
|
2016-05-25 21:29:20 +08:00
|
|
|
int numa_node;
|
2016-12-20 01:25:54 +08:00
|
|
|
bool is_v4;
|
2014-11-24 22:35:11 +08:00
|
|
|
};
|
|
|
|
|
|
|
|
#define ITS_ITT_ALIGN SZ_256
|
|
|
|
|
2016-02-17 08:00:36 +08:00
|
|
|
/* Convert page order to size in bytes */
|
|
|
|
#define PAGE_ORDER_TO_SIZE(o) (PAGE_SIZE << (o))
|
|
|
|
|
irqchip/gicv3-its: Fix mapping of LPIs to collections
The GICv3 ITS architecture allows a given [DevID, EventID] pair to be
translated to a [LPI, Collection] pair, where DevID is the device writing
the MSI, EventID is the payload being written, LPI is the actual
interrupt number, and Collection is roughly equivalent to a target CPU.
Each LPI can be mapped to a separate collection, but the ITS driver
insists on maintaining the collection on a device basis, instead of doing
it on a per interrupt basis.
This is obviously flawed, and this patch fixes it by adding a per interrupt
index that indicates which collection number is in use.
Reported-by: Ian Campbell <ian.campbell@citrix.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Cc: <linux-arm-kernel@lists.infradead.org>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: stable@vger.kernel.org # 4.1, 4.0
Link: http://lkml.kernel.org/r/1437126402-11677-1-git-send-email-marc.zyngier@arm.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-07-17 17:46:42 +08:00
|
|
|
struct event_lpi_map {
|
|
|
|
unsigned long *lpi_map;
|
|
|
|
u16 *col_map;
|
|
|
|
irq_hw_number_t lpi_base;
|
|
|
|
int nr_lpis;
|
2016-12-20 17:44:41 +08:00
|
|
|
struct mutex vlpi_lock;
|
|
|
|
struct its_vm *vm;
|
|
|
|
struct its_vlpi_map *vlpi_maps;
|
|
|
|
int nr_vlpis;
|
irqchip/gicv3-its: Fix mapping of LPIs to collections
The GICv3 ITS architecture allows a given [DevID, EventID] pair to be
translated to a [LPI, Collection] pair, where DevID is the device writing
the MSI, EventID is the payload being written, LPI is the actual
interrupt number, and Collection is roughly equivalent to a target CPU.
Each LPI can be mapped to a separate collection, but the ITS driver
insists on maintaining the collection on a device basis, instead of doing
it on a per interrupt basis.
This is obviously flawed, and this patch fixes it by adding a per interrupt
index that indicates which collection number is in use.
Reported-by: Ian Campbell <ian.campbell@citrix.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Cc: <linux-arm-kernel@lists.infradead.org>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: stable@vger.kernel.org # 4.1, 4.0
Link: http://lkml.kernel.org/r/1437126402-11677-1-git-send-email-marc.zyngier@arm.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-07-17 17:46:42 +08:00
|
|
|
};
|
|
|
|
|
2014-11-24 22:35:11 +08:00
|
|
|
/*
|
2016-12-20 17:44:41 +08:00
|
|
|
* The ITS view of a device - belongs to an ITS, owns an interrupt
|
|
|
|
* translation table, and a list of interrupts. If it some of its
|
|
|
|
* LPIs are injected into a guest (GICv4), the event_map.vm field
|
|
|
|
* indicates which one.
|
2014-11-24 22:35:11 +08:00
|
|
|
*/
|
|
|
|
struct its_device {
|
|
|
|
struct list_head entry;
|
|
|
|
struct its_node *its;
|
irqchip/gicv3-its: Fix mapping of LPIs to collections
The GICv3 ITS architecture allows a given [DevID, EventID] pair to be
translated to a [LPI, Collection] pair, where DevID is the device writing
the MSI, EventID is the payload being written, LPI is the actual
interrupt number, and Collection is roughly equivalent to a target CPU.
Each LPI can be mapped to a separate collection, but the ITS driver
insists on maintaining the collection on a device basis, instead of doing
it on a per interrupt basis.
This is obviously flawed, and this patch fixes it by adding a per interrupt
index that indicates which collection number is in use.
Reported-by: Ian Campbell <ian.campbell@citrix.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Cc: <linux-arm-kernel@lists.infradead.org>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: stable@vger.kernel.org # 4.1, 4.0
Link: http://lkml.kernel.org/r/1437126402-11677-1-git-send-email-marc.zyngier@arm.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-07-17 17:46:42 +08:00
|
|
|
struct event_lpi_map event_map;
|
2014-11-24 22:35:11 +08:00
|
|
|
void *itt;
|
|
|
|
u32 nr_ites;
|
|
|
|
u32 device_id;
|
|
|
|
};
|
|
|
|
|
2014-11-24 22:35:14 +08:00
|
|
|
static LIST_HEAD(its_nodes);
|
|
|
|
static DEFINE_SPINLOCK(its_lock);
|
|
|
|
static struct rdists *gic_rdists;
|
2016-09-13 02:32:24 +08:00
|
|
|
static struct irq_domain *its_parent;
|
2014-11-24 22:35:14 +08:00
|
|
|
|
2016-12-20 01:25:54 +08:00
|
|
|
/*
|
|
|
|
* We have a maximum number of 16 ITSs in the whole system if we're
|
|
|
|
* using the ITSList mechanism
|
|
|
|
*/
|
|
|
|
#define ITS_LIST_MAX 16
|
|
|
|
|
|
|
|
static unsigned long its_list_map;
|
|
|
|
|
2014-11-24 22:35:14 +08:00
|
|
|
#define gic_data_rdist() (raw_cpu_ptr(gic_rdists->rdist))
|
|
|
|
#define gic_data_rdist_rd_base() (gic_data_rdist()->rd_base)
|
|
|
|
|
irqchip/gicv3-its: Fix mapping of LPIs to collections
The GICv3 ITS architecture allows a given [DevID, EventID] pair to be
translated to a [LPI, Collection] pair, where DevID is the device writing
the MSI, EventID is the payload being written, LPI is the actual
interrupt number, and Collection is roughly equivalent to a target CPU.
Each LPI can be mapped to a separate collection, but the ITS driver
insists on maintaining the collection on a device basis, instead of doing
it on a per interrupt basis.
This is obviously flawed, and this patch fixes it by adding a per interrupt
index that indicates which collection number is in use.
Reported-by: Ian Campbell <ian.campbell@citrix.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Cc: <linux-arm-kernel@lists.infradead.org>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: stable@vger.kernel.org # 4.1, 4.0
Link: http://lkml.kernel.org/r/1437126402-11677-1-git-send-email-marc.zyngier@arm.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-07-17 17:46:42 +08:00
|
|
|
static struct its_collection *dev_event_to_col(struct its_device *its_dev,
|
|
|
|
u32 event)
|
|
|
|
{
|
|
|
|
struct its_node *its = its_dev->its;
|
|
|
|
|
|
|
|
return its->collections + its_dev->event_map.col_map[event];
|
|
|
|
}
|
|
|
|
|
2014-11-24 22:35:11 +08:00
|
|
|
/*
|
|
|
|
* ITS command descriptors - parameters to be encoded in a command
|
|
|
|
* block.
|
|
|
|
*/
|
|
|
|
struct its_cmd_desc {
|
|
|
|
union {
|
|
|
|
struct {
|
|
|
|
struct its_device *dev;
|
|
|
|
u32 event_id;
|
|
|
|
} its_inv_cmd;
|
|
|
|
|
2016-12-20 02:02:13 +08:00
|
|
|
struct {
|
|
|
|
struct its_device *dev;
|
|
|
|
u32 event_id;
|
|
|
|
} its_clear_cmd;
|
|
|
|
|
2014-11-24 22:35:11 +08:00
|
|
|
struct {
|
|
|
|
struct its_device *dev;
|
|
|
|
u32 event_id;
|
|
|
|
} its_int_cmd;
|
|
|
|
|
|
|
|
struct {
|
|
|
|
struct its_device *dev;
|
|
|
|
int valid;
|
|
|
|
} its_mapd_cmd;
|
|
|
|
|
|
|
|
struct {
|
|
|
|
struct its_collection *col;
|
|
|
|
int valid;
|
|
|
|
} its_mapc_cmd;
|
|
|
|
|
|
|
|
struct {
|
|
|
|
struct its_device *dev;
|
|
|
|
u32 phys_id;
|
|
|
|
u32 event_id;
|
2016-12-20 23:52:26 +08:00
|
|
|
} its_mapti_cmd;
|
2014-11-24 22:35:11 +08:00
|
|
|
|
|
|
|
struct {
|
|
|
|
struct its_device *dev;
|
|
|
|
struct its_collection *col;
|
irqchip/gicv3-its: Fix mapping of LPIs to collections
The GICv3 ITS architecture allows a given [DevID, EventID] pair to be
translated to a [LPI, Collection] pair, where DevID is the device writing
the MSI, EventID is the payload being written, LPI is the actual
interrupt number, and Collection is roughly equivalent to a target CPU.
Each LPI can be mapped to a separate collection, but the ITS driver
insists on maintaining the collection on a device basis, instead of doing
it on a per interrupt basis.
This is obviously flawed, and this patch fixes it by adding a per interrupt
index that indicates which collection number is in use.
Reported-by: Ian Campbell <ian.campbell@citrix.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Cc: <linux-arm-kernel@lists.infradead.org>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: stable@vger.kernel.org # 4.1, 4.0
Link: http://lkml.kernel.org/r/1437126402-11677-1-git-send-email-marc.zyngier@arm.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-07-17 17:46:42 +08:00
|
|
|
u32 event_id;
|
2014-11-24 22:35:11 +08:00
|
|
|
} its_movi_cmd;
|
|
|
|
|
|
|
|
struct {
|
|
|
|
struct its_device *dev;
|
|
|
|
u32 event_id;
|
|
|
|
} its_discard_cmd;
|
|
|
|
|
|
|
|
struct {
|
|
|
|
struct its_collection *col;
|
|
|
|
} its_invall_cmd;
|
2016-12-20 17:44:41 +08:00
|
|
|
|
|
|
|
struct {
|
|
|
|
struct its_vpe *vpe;
|
|
|
|
struct its_device *dev;
|
|
|
|
u32 virt_id;
|
|
|
|
u32 event_id;
|
|
|
|
bool db_enabled;
|
|
|
|
} its_vmapti_cmd;
|
|
|
|
|
|
|
|
struct {
|
|
|
|
struct its_vpe *vpe;
|
|
|
|
struct its_device *dev;
|
|
|
|
u32 event_id;
|
|
|
|
bool db_enabled;
|
|
|
|
} its_vmovi_cmd;
|
2014-11-24 22:35:11 +08:00
|
|
|
};
|
|
|
|
};
|
|
|
|
|
|
|
|
/*
|
|
|
|
* The ITS command block, which is what the ITS actually parses.
|
|
|
|
*/
|
|
|
|
struct its_cmd_block {
|
|
|
|
u64 raw_cmd[4];
|
|
|
|
};
|
|
|
|
|
|
|
|
#define ITS_CMD_QUEUE_SZ SZ_64K
|
|
|
|
#define ITS_CMD_QUEUE_NR_ENTRIES (ITS_CMD_QUEUE_SZ / sizeof(struct its_cmd_block))
|
|
|
|
|
|
|
|
typedef struct its_collection *(*its_cmd_builder_t)(struct its_cmd_block *,
|
|
|
|
struct its_cmd_desc *);
|
|
|
|
|
2016-12-20 17:44:41 +08:00
|
|
|
typedef struct its_vpe *(*its_cmd_vbuilder_t)(struct its_cmd_block *,
|
|
|
|
struct its_cmd_desc *);
|
|
|
|
|
2016-12-20 01:11:52 +08:00
|
|
|
static void its_mask_encode(u64 *raw_cmd, u64 val, int h, int l)
|
|
|
|
{
|
|
|
|
u64 mask = GENMASK_ULL(h, l);
|
|
|
|
*raw_cmd &= ~mask;
|
|
|
|
*raw_cmd |= (val << l) & mask;
|
|
|
|
}
|
|
|
|
|
2014-11-24 22:35:11 +08:00
|
|
|
static void its_encode_cmd(struct its_cmd_block *cmd, u8 cmd_nr)
|
|
|
|
{
|
2016-12-20 01:11:52 +08:00
|
|
|
its_mask_encode(&cmd->raw_cmd[0], cmd_nr, 7, 0);
|
2014-11-24 22:35:11 +08:00
|
|
|
}
|
|
|
|
|
|
|
|
static void its_encode_devid(struct its_cmd_block *cmd, u32 devid)
|
|
|
|
{
|
2016-12-20 01:11:52 +08:00
|
|
|
its_mask_encode(&cmd->raw_cmd[0], devid, 63, 32);
|
2014-11-24 22:35:11 +08:00
|
|
|
}
|
|
|
|
|
|
|
|
static void its_encode_event_id(struct its_cmd_block *cmd, u32 id)
|
|
|
|
{
|
2016-12-20 01:11:52 +08:00
|
|
|
its_mask_encode(&cmd->raw_cmd[1], id, 31, 0);
|
2014-11-24 22:35:11 +08:00
|
|
|
}
|
|
|
|
|
|
|
|
static void its_encode_phys_id(struct its_cmd_block *cmd, u32 phys_id)
|
|
|
|
{
|
2016-12-20 01:11:52 +08:00
|
|
|
its_mask_encode(&cmd->raw_cmd[1], phys_id, 63, 32);
|
2014-11-24 22:35:11 +08:00
|
|
|
}
|
|
|
|
|
|
|
|
static void its_encode_size(struct its_cmd_block *cmd, u8 size)
|
|
|
|
{
|
2016-12-20 01:11:52 +08:00
|
|
|
its_mask_encode(&cmd->raw_cmd[1], size, 4, 0);
|
2014-11-24 22:35:11 +08:00
|
|
|
}
|
|
|
|
|
|
|
|
static void its_encode_itt(struct its_cmd_block *cmd, u64 itt_addr)
|
|
|
|
{
|
2016-12-20 01:11:52 +08:00
|
|
|
its_mask_encode(&cmd->raw_cmd[2], itt_addr >> 8, 50, 8);
|
2014-11-24 22:35:11 +08:00
|
|
|
}
|
|
|
|
|
|
|
|
static void its_encode_valid(struct its_cmd_block *cmd, int valid)
|
|
|
|
{
|
2016-12-20 01:11:52 +08:00
|
|
|
its_mask_encode(&cmd->raw_cmd[2], !!valid, 63, 63);
|
2014-11-24 22:35:11 +08:00
|
|
|
}
|
|
|
|
|
|
|
|
static void its_encode_target(struct its_cmd_block *cmd, u64 target_addr)
|
|
|
|
{
|
2016-12-20 01:11:52 +08:00
|
|
|
its_mask_encode(&cmd->raw_cmd[2], target_addr >> 16, 50, 16);
|
2014-11-24 22:35:11 +08:00
|
|
|
}
|
|
|
|
|
|
|
|
static void its_encode_collection(struct its_cmd_block *cmd, u16 col)
|
|
|
|
{
|
2016-12-20 01:11:52 +08:00
|
|
|
its_mask_encode(&cmd->raw_cmd[2], col, 15, 0);
|
2014-11-24 22:35:11 +08:00
|
|
|
}
|
|
|
|
|
2016-12-20 17:44:41 +08:00
|
|
|
static void its_encode_vpeid(struct its_cmd_block *cmd, u16 vpeid)
|
|
|
|
{
|
|
|
|
its_mask_encode(&cmd->raw_cmd[1], vpeid, 47, 32);
|
|
|
|
}
|
|
|
|
|
|
|
|
static void its_encode_virt_id(struct its_cmd_block *cmd, u32 virt_id)
|
|
|
|
{
|
|
|
|
its_mask_encode(&cmd->raw_cmd[2], virt_id, 31, 0);
|
|
|
|
}
|
|
|
|
|
|
|
|
static void its_encode_db_phys_id(struct its_cmd_block *cmd, u32 db_phys_id)
|
|
|
|
{
|
|
|
|
its_mask_encode(&cmd->raw_cmd[2], db_phys_id, 63, 32);
|
|
|
|
}
|
|
|
|
|
|
|
|
static void its_encode_db_valid(struct its_cmd_block *cmd, bool db_valid)
|
|
|
|
{
|
|
|
|
its_mask_encode(&cmd->raw_cmd[2], db_valid, 0, 0);
|
|
|
|
}
|
|
|
|
|
2014-11-24 22:35:11 +08:00
|
|
|
static inline void its_fixup_cmd(struct its_cmd_block *cmd)
|
|
|
|
{
|
|
|
|
/* Let's fixup BE commands */
|
|
|
|
cmd->raw_cmd[0] = cpu_to_le64(cmd->raw_cmd[0]);
|
|
|
|
cmd->raw_cmd[1] = cpu_to_le64(cmd->raw_cmd[1]);
|
|
|
|
cmd->raw_cmd[2] = cpu_to_le64(cmd->raw_cmd[2]);
|
|
|
|
cmd->raw_cmd[3] = cpu_to_le64(cmd->raw_cmd[3]);
|
|
|
|
}
|
|
|
|
|
|
|
|
static struct its_collection *its_build_mapd_cmd(struct its_cmd_block *cmd,
|
|
|
|
struct its_cmd_desc *desc)
|
|
|
|
{
|
|
|
|
unsigned long itt_addr;
|
2014-12-12 18:51:24 +08:00
|
|
|
u8 size = ilog2(desc->its_mapd_cmd.dev->nr_ites);
|
2014-11-24 22:35:11 +08:00
|
|
|
|
|
|
|
itt_addr = virt_to_phys(desc->its_mapd_cmd.dev->itt);
|
|
|
|
itt_addr = ALIGN(itt_addr, ITS_ITT_ALIGN);
|
|
|
|
|
|
|
|
its_encode_cmd(cmd, GITS_CMD_MAPD);
|
|
|
|
its_encode_devid(cmd, desc->its_mapd_cmd.dev->device_id);
|
|
|
|
its_encode_size(cmd, size - 1);
|
|
|
|
its_encode_itt(cmd, itt_addr);
|
|
|
|
its_encode_valid(cmd, desc->its_mapd_cmd.valid);
|
|
|
|
|
|
|
|
its_fixup_cmd(cmd);
|
|
|
|
|
irqchip/gicv3-its: Fix mapping of LPIs to collections
The GICv3 ITS architecture allows a given [DevID, EventID] pair to be
translated to a [LPI, Collection] pair, where DevID is the device writing
the MSI, EventID is the payload being written, LPI is the actual
interrupt number, and Collection is roughly equivalent to a target CPU.
Each LPI can be mapped to a separate collection, but the ITS driver
insists on maintaining the collection on a device basis, instead of doing
it on a per interrupt basis.
This is obviously flawed, and this patch fixes it by adding a per interrupt
index that indicates which collection number is in use.
Reported-by: Ian Campbell <ian.campbell@citrix.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Cc: <linux-arm-kernel@lists.infradead.org>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: stable@vger.kernel.org # 4.1, 4.0
Link: http://lkml.kernel.org/r/1437126402-11677-1-git-send-email-marc.zyngier@arm.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-07-17 17:46:42 +08:00
|
|
|
return NULL;
|
2014-11-24 22:35:11 +08:00
|
|
|
}
|
|
|
|
|
|
|
|
static struct its_collection *its_build_mapc_cmd(struct its_cmd_block *cmd,
|
|
|
|
struct its_cmd_desc *desc)
|
|
|
|
{
|
|
|
|
its_encode_cmd(cmd, GITS_CMD_MAPC);
|
|
|
|
its_encode_collection(cmd, desc->its_mapc_cmd.col->col_id);
|
|
|
|
its_encode_target(cmd, desc->its_mapc_cmd.col->target_address);
|
|
|
|
its_encode_valid(cmd, desc->its_mapc_cmd.valid);
|
|
|
|
|
|
|
|
its_fixup_cmd(cmd);
|
|
|
|
|
|
|
|
return desc->its_mapc_cmd.col;
|
|
|
|
}
|
|
|
|
|
2016-12-20 23:52:26 +08:00
|
|
|
static struct its_collection *its_build_mapti_cmd(struct its_cmd_block *cmd,
|
2014-11-24 22:35:11 +08:00
|
|
|
struct its_cmd_desc *desc)
|
|
|
|
{
|
irqchip/gicv3-its: Fix mapping of LPIs to collections
The GICv3 ITS architecture allows a given [DevID, EventID] pair to be
translated to a [LPI, Collection] pair, where DevID is the device writing
the MSI, EventID is the payload being written, LPI is the actual
interrupt number, and Collection is roughly equivalent to a target CPU.
Each LPI can be mapped to a separate collection, but the ITS driver
insists on maintaining the collection on a device basis, instead of doing
it on a per interrupt basis.
This is obviously flawed, and this patch fixes it by adding a per interrupt
index that indicates which collection number is in use.
Reported-by: Ian Campbell <ian.campbell@citrix.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Cc: <linux-arm-kernel@lists.infradead.org>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: stable@vger.kernel.org # 4.1, 4.0
Link: http://lkml.kernel.org/r/1437126402-11677-1-git-send-email-marc.zyngier@arm.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-07-17 17:46:42 +08:00
|
|
|
struct its_collection *col;
|
|
|
|
|
2016-12-20 23:52:26 +08:00
|
|
|
col = dev_event_to_col(desc->its_mapti_cmd.dev,
|
|
|
|
desc->its_mapti_cmd.event_id);
|
irqchip/gicv3-its: Fix mapping of LPIs to collections
The GICv3 ITS architecture allows a given [DevID, EventID] pair to be
translated to a [LPI, Collection] pair, where DevID is the device writing
the MSI, EventID is the payload being written, LPI is the actual
interrupt number, and Collection is roughly equivalent to a target CPU.
Each LPI can be mapped to a separate collection, but the ITS driver
insists on maintaining the collection on a device basis, instead of doing
it on a per interrupt basis.
This is obviously flawed, and this patch fixes it by adding a per interrupt
index that indicates which collection number is in use.
Reported-by: Ian Campbell <ian.campbell@citrix.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Cc: <linux-arm-kernel@lists.infradead.org>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: stable@vger.kernel.org # 4.1, 4.0
Link: http://lkml.kernel.org/r/1437126402-11677-1-git-send-email-marc.zyngier@arm.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-07-17 17:46:42 +08:00
|
|
|
|
2016-12-20 23:52:26 +08:00
|
|
|
its_encode_cmd(cmd, GITS_CMD_MAPTI);
|
|
|
|
its_encode_devid(cmd, desc->its_mapti_cmd.dev->device_id);
|
|
|
|
its_encode_event_id(cmd, desc->its_mapti_cmd.event_id);
|
|
|
|
its_encode_phys_id(cmd, desc->its_mapti_cmd.phys_id);
|
irqchip/gicv3-its: Fix mapping of LPIs to collections
The GICv3 ITS architecture allows a given [DevID, EventID] pair to be
translated to a [LPI, Collection] pair, where DevID is the device writing
the MSI, EventID is the payload being written, LPI is the actual
interrupt number, and Collection is roughly equivalent to a target CPU.
Each LPI can be mapped to a separate collection, but the ITS driver
insists on maintaining the collection on a device basis, instead of doing
it on a per interrupt basis.
This is obviously flawed, and this patch fixes it by adding a per interrupt
index that indicates which collection number is in use.
Reported-by: Ian Campbell <ian.campbell@citrix.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Cc: <linux-arm-kernel@lists.infradead.org>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: stable@vger.kernel.org # 4.1, 4.0
Link: http://lkml.kernel.org/r/1437126402-11677-1-git-send-email-marc.zyngier@arm.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-07-17 17:46:42 +08:00
|
|
|
its_encode_collection(cmd, col->col_id);
|
2014-11-24 22:35:11 +08:00
|
|
|
|
|
|
|
its_fixup_cmd(cmd);
|
|
|
|
|
irqchip/gicv3-its: Fix mapping of LPIs to collections
The GICv3 ITS architecture allows a given [DevID, EventID] pair to be
translated to a [LPI, Collection] pair, where DevID is the device writing
the MSI, EventID is the payload being written, LPI is the actual
interrupt number, and Collection is roughly equivalent to a target CPU.
Each LPI can be mapped to a separate collection, but the ITS driver
insists on maintaining the collection on a device basis, instead of doing
it on a per interrupt basis.
This is obviously flawed, and this patch fixes it by adding a per interrupt
index that indicates which collection number is in use.
Reported-by: Ian Campbell <ian.campbell@citrix.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Cc: <linux-arm-kernel@lists.infradead.org>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: stable@vger.kernel.org # 4.1, 4.0
Link: http://lkml.kernel.org/r/1437126402-11677-1-git-send-email-marc.zyngier@arm.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-07-17 17:46:42 +08:00
|
|
|
return col;
|
2014-11-24 22:35:11 +08:00
|
|
|
}
|
|
|
|
|
|
|
|
static struct its_collection *its_build_movi_cmd(struct its_cmd_block *cmd,
|
|
|
|
struct its_cmd_desc *desc)
|
|
|
|
{
|
irqchip/gicv3-its: Fix mapping of LPIs to collections
The GICv3 ITS architecture allows a given [DevID, EventID] pair to be
translated to a [LPI, Collection] pair, where DevID is the device writing
the MSI, EventID is the payload being written, LPI is the actual
interrupt number, and Collection is roughly equivalent to a target CPU.
Each LPI can be mapped to a separate collection, but the ITS driver
insists on maintaining the collection on a device basis, instead of doing
it on a per interrupt basis.
This is obviously flawed, and this patch fixes it by adding a per interrupt
index that indicates which collection number is in use.
Reported-by: Ian Campbell <ian.campbell@citrix.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Cc: <linux-arm-kernel@lists.infradead.org>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: stable@vger.kernel.org # 4.1, 4.0
Link: http://lkml.kernel.org/r/1437126402-11677-1-git-send-email-marc.zyngier@arm.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-07-17 17:46:42 +08:00
|
|
|
struct its_collection *col;
|
|
|
|
|
|
|
|
col = dev_event_to_col(desc->its_movi_cmd.dev,
|
|
|
|
desc->its_movi_cmd.event_id);
|
|
|
|
|
2014-11-24 22:35:11 +08:00
|
|
|
its_encode_cmd(cmd, GITS_CMD_MOVI);
|
|
|
|
its_encode_devid(cmd, desc->its_movi_cmd.dev->device_id);
|
irqchip/gicv3-its: Fix mapping of LPIs to collections
The GICv3 ITS architecture allows a given [DevID, EventID] pair to be
translated to a [LPI, Collection] pair, where DevID is the device writing
the MSI, EventID is the payload being written, LPI is the actual
interrupt number, and Collection is roughly equivalent to a target CPU.
Each LPI can be mapped to a separate collection, but the ITS driver
insists on maintaining the collection on a device basis, instead of doing
it on a per interrupt basis.
This is obviously flawed, and this patch fixes it by adding a per interrupt
index that indicates which collection number is in use.
Reported-by: Ian Campbell <ian.campbell@citrix.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Cc: <linux-arm-kernel@lists.infradead.org>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: stable@vger.kernel.org # 4.1, 4.0
Link: http://lkml.kernel.org/r/1437126402-11677-1-git-send-email-marc.zyngier@arm.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-07-17 17:46:42 +08:00
|
|
|
its_encode_event_id(cmd, desc->its_movi_cmd.event_id);
|
2014-11-24 22:35:11 +08:00
|
|
|
its_encode_collection(cmd, desc->its_movi_cmd.col->col_id);
|
|
|
|
|
|
|
|
its_fixup_cmd(cmd);
|
|
|
|
|
irqchip/gicv3-its: Fix mapping of LPIs to collections
The GICv3 ITS architecture allows a given [DevID, EventID] pair to be
translated to a [LPI, Collection] pair, where DevID is the device writing
the MSI, EventID is the payload being written, LPI is the actual
interrupt number, and Collection is roughly equivalent to a target CPU.
Each LPI can be mapped to a separate collection, but the ITS driver
insists on maintaining the collection on a device basis, instead of doing
it on a per interrupt basis.
This is obviously flawed, and this patch fixes it by adding a per interrupt
index that indicates which collection number is in use.
Reported-by: Ian Campbell <ian.campbell@citrix.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Cc: <linux-arm-kernel@lists.infradead.org>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: stable@vger.kernel.org # 4.1, 4.0
Link: http://lkml.kernel.org/r/1437126402-11677-1-git-send-email-marc.zyngier@arm.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-07-17 17:46:42 +08:00
|
|
|
return col;
|
2014-11-24 22:35:11 +08:00
|
|
|
}
|
|
|
|
|
|
|
|
static struct its_collection *its_build_discard_cmd(struct its_cmd_block *cmd,
|
|
|
|
struct its_cmd_desc *desc)
|
|
|
|
{
|
irqchip/gicv3-its: Fix mapping of LPIs to collections
The GICv3 ITS architecture allows a given [DevID, EventID] pair to be
translated to a [LPI, Collection] pair, where DevID is the device writing
the MSI, EventID is the payload being written, LPI is the actual
interrupt number, and Collection is roughly equivalent to a target CPU.
Each LPI can be mapped to a separate collection, but the ITS driver
insists on maintaining the collection on a device basis, instead of doing
it on a per interrupt basis.
This is obviously flawed, and this patch fixes it by adding a per interrupt
index that indicates which collection number is in use.
Reported-by: Ian Campbell <ian.campbell@citrix.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Cc: <linux-arm-kernel@lists.infradead.org>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: stable@vger.kernel.org # 4.1, 4.0
Link: http://lkml.kernel.org/r/1437126402-11677-1-git-send-email-marc.zyngier@arm.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-07-17 17:46:42 +08:00
|
|
|
struct its_collection *col;
|
|
|
|
|
|
|
|
col = dev_event_to_col(desc->its_discard_cmd.dev,
|
|
|
|
desc->its_discard_cmd.event_id);
|
|
|
|
|
2014-11-24 22:35:11 +08:00
|
|
|
its_encode_cmd(cmd, GITS_CMD_DISCARD);
|
|
|
|
its_encode_devid(cmd, desc->its_discard_cmd.dev->device_id);
|
|
|
|
its_encode_event_id(cmd, desc->its_discard_cmd.event_id);
|
|
|
|
|
|
|
|
its_fixup_cmd(cmd);
|
|
|
|
|
irqchip/gicv3-its: Fix mapping of LPIs to collections
The GICv3 ITS architecture allows a given [DevID, EventID] pair to be
translated to a [LPI, Collection] pair, where DevID is the device writing
the MSI, EventID is the payload being written, LPI is the actual
interrupt number, and Collection is roughly equivalent to a target CPU.
Each LPI can be mapped to a separate collection, but the ITS driver
insists on maintaining the collection on a device basis, instead of doing
it on a per interrupt basis.
This is obviously flawed, and this patch fixes it by adding a per interrupt
index that indicates which collection number is in use.
Reported-by: Ian Campbell <ian.campbell@citrix.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Cc: <linux-arm-kernel@lists.infradead.org>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: stable@vger.kernel.org # 4.1, 4.0
Link: http://lkml.kernel.org/r/1437126402-11677-1-git-send-email-marc.zyngier@arm.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-07-17 17:46:42 +08:00
|
|
|
return col;
|
2014-11-24 22:35:11 +08:00
|
|
|
}
|
|
|
|
|
|
|
|
static struct its_collection *its_build_inv_cmd(struct its_cmd_block *cmd,
|
|
|
|
struct its_cmd_desc *desc)
|
|
|
|
{
|
irqchip/gicv3-its: Fix mapping of LPIs to collections
The GICv3 ITS architecture allows a given [DevID, EventID] pair to be
translated to a [LPI, Collection] pair, where DevID is the device writing
the MSI, EventID is the payload being written, LPI is the actual
interrupt number, and Collection is roughly equivalent to a target CPU.
Each LPI can be mapped to a separate collection, but the ITS driver
insists on maintaining the collection on a device basis, instead of doing
it on a per interrupt basis.
This is obviously flawed, and this patch fixes it by adding a per interrupt
index that indicates which collection number is in use.
Reported-by: Ian Campbell <ian.campbell@citrix.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Cc: <linux-arm-kernel@lists.infradead.org>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: stable@vger.kernel.org # 4.1, 4.0
Link: http://lkml.kernel.org/r/1437126402-11677-1-git-send-email-marc.zyngier@arm.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-07-17 17:46:42 +08:00
|
|
|
struct its_collection *col;
|
|
|
|
|
|
|
|
col = dev_event_to_col(desc->its_inv_cmd.dev,
|
|
|
|
desc->its_inv_cmd.event_id);
|
|
|
|
|
2014-11-24 22:35:11 +08:00
|
|
|
its_encode_cmd(cmd, GITS_CMD_INV);
|
|
|
|
its_encode_devid(cmd, desc->its_inv_cmd.dev->device_id);
|
|
|
|
its_encode_event_id(cmd, desc->its_inv_cmd.event_id);
|
|
|
|
|
|
|
|
its_fixup_cmd(cmd);
|
|
|
|
|
irqchip/gicv3-its: Fix mapping of LPIs to collections
The GICv3 ITS architecture allows a given [DevID, EventID] pair to be
translated to a [LPI, Collection] pair, where DevID is the device writing
the MSI, EventID is the payload being written, LPI is the actual
interrupt number, and Collection is roughly equivalent to a target CPU.
Each LPI can be mapped to a separate collection, but the ITS driver
insists on maintaining the collection on a device basis, instead of doing
it on a per interrupt basis.
This is obviously flawed, and this patch fixes it by adding a per interrupt
index that indicates which collection number is in use.
Reported-by: Ian Campbell <ian.campbell@citrix.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Cc: <linux-arm-kernel@lists.infradead.org>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: stable@vger.kernel.org # 4.1, 4.0
Link: http://lkml.kernel.org/r/1437126402-11677-1-git-send-email-marc.zyngier@arm.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-07-17 17:46:42 +08:00
|
|
|
return col;
|
2014-11-24 22:35:11 +08:00
|
|
|
}
|
|
|
|
|
2016-12-20 02:02:13 +08:00
|
|
|
static struct its_collection *its_build_int_cmd(struct its_cmd_block *cmd,
|
|
|
|
struct its_cmd_desc *desc)
|
|
|
|
{
|
|
|
|
struct its_collection *col;
|
|
|
|
|
|
|
|
col = dev_event_to_col(desc->its_int_cmd.dev,
|
|
|
|
desc->its_int_cmd.event_id);
|
|
|
|
|
|
|
|
its_encode_cmd(cmd, GITS_CMD_INT);
|
|
|
|
its_encode_devid(cmd, desc->its_int_cmd.dev->device_id);
|
|
|
|
its_encode_event_id(cmd, desc->its_int_cmd.event_id);
|
|
|
|
|
|
|
|
its_fixup_cmd(cmd);
|
|
|
|
|
|
|
|
return col;
|
|
|
|
}
|
|
|
|
|
|
|
|
static struct its_collection *its_build_clear_cmd(struct its_cmd_block *cmd,
|
|
|
|
struct its_cmd_desc *desc)
|
|
|
|
{
|
|
|
|
struct its_collection *col;
|
|
|
|
|
|
|
|
col = dev_event_to_col(desc->its_clear_cmd.dev,
|
|
|
|
desc->its_clear_cmd.event_id);
|
|
|
|
|
|
|
|
its_encode_cmd(cmd, GITS_CMD_CLEAR);
|
|
|
|
its_encode_devid(cmd, desc->its_clear_cmd.dev->device_id);
|
|
|
|
its_encode_event_id(cmd, desc->its_clear_cmd.event_id);
|
|
|
|
|
|
|
|
its_fixup_cmd(cmd);
|
|
|
|
|
|
|
|
return col;
|
|
|
|
}
|
|
|
|
|
2014-11-24 22:35:11 +08:00
|
|
|
static struct its_collection *its_build_invall_cmd(struct its_cmd_block *cmd,
|
|
|
|
struct its_cmd_desc *desc)
|
|
|
|
{
|
|
|
|
its_encode_cmd(cmd, GITS_CMD_INVALL);
|
|
|
|
its_encode_collection(cmd, desc->its_mapc_cmd.col->col_id);
|
|
|
|
|
|
|
|
its_fixup_cmd(cmd);
|
|
|
|
|
|
|
|
return NULL;
|
|
|
|
}
|
|
|
|
|
2016-12-20 17:44:41 +08:00
|
|
|
static struct its_vpe *its_build_vmapti_cmd(struct its_cmd_block *cmd,
|
|
|
|
struct its_cmd_desc *desc)
|
|
|
|
{
|
|
|
|
u32 db;
|
|
|
|
|
|
|
|
if (desc->its_vmapti_cmd.db_enabled)
|
|
|
|
db = desc->its_vmapti_cmd.vpe->vpe_db_lpi;
|
|
|
|
else
|
|
|
|
db = 1023;
|
|
|
|
|
|
|
|
its_encode_cmd(cmd, GITS_CMD_VMAPTI);
|
|
|
|
its_encode_devid(cmd, desc->its_vmapti_cmd.dev->device_id);
|
|
|
|
its_encode_vpeid(cmd, desc->its_vmapti_cmd.vpe->vpe_id);
|
|
|
|
its_encode_event_id(cmd, desc->its_vmapti_cmd.event_id);
|
|
|
|
its_encode_db_phys_id(cmd, db);
|
|
|
|
its_encode_virt_id(cmd, desc->its_vmapti_cmd.virt_id);
|
|
|
|
|
|
|
|
its_fixup_cmd(cmd);
|
|
|
|
|
|
|
|
return desc->its_vmapti_cmd.vpe;
|
|
|
|
}
|
|
|
|
|
|
|
|
static struct its_vpe *its_build_vmovi_cmd(struct its_cmd_block *cmd,
|
|
|
|
struct its_cmd_desc *desc)
|
|
|
|
{
|
|
|
|
u32 db;
|
|
|
|
|
|
|
|
if (desc->its_vmovi_cmd.db_enabled)
|
|
|
|
db = desc->its_vmovi_cmd.vpe->vpe_db_lpi;
|
|
|
|
else
|
|
|
|
db = 1023;
|
|
|
|
|
|
|
|
its_encode_cmd(cmd, GITS_CMD_VMOVI);
|
|
|
|
its_encode_devid(cmd, desc->its_vmovi_cmd.dev->device_id);
|
|
|
|
its_encode_vpeid(cmd, desc->its_vmovi_cmd.vpe->vpe_id);
|
|
|
|
its_encode_event_id(cmd, desc->its_vmovi_cmd.event_id);
|
|
|
|
its_encode_db_phys_id(cmd, db);
|
|
|
|
its_encode_db_valid(cmd, true);
|
|
|
|
|
|
|
|
its_fixup_cmd(cmd);
|
|
|
|
|
|
|
|
return desc->its_vmovi_cmd.vpe;
|
|
|
|
}
|
|
|
|
|
2014-11-24 22:35:11 +08:00
|
|
|
static u64 its_cmd_ptr_to_offset(struct its_node *its,
|
|
|
|
struct its_cmd_block *ptr)
|
|
|
|
{
|
|
|
|
return (ptr - its->cmd_base) * sizeof(*ptr);
|
|
|
|
}
|
|
|
|
|
|
|
|
static int its_queue_full(struct its_node *its)
|
|
|
|
{
|
|
|
|
int widx;
|
|
|
|
int ridx;
|
|
|
|
|
|
|
|
widx = its->cmd_write - its->cmd_base;
|
|
|
|
ridx = readl_relaxed(its->base + GITS_CREADR) / sizeof(struct its_cmd_block);
|
|
|
|
|
|
|
|
/* This is incredibly unlikely to happen, unless the ITS locks up. */
|
|
|
|
if (((widx + 1) % ITS_CMD_QUEUE_NR_ENTRIES) == ridx)
|
|
|
|
return 1;
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static struct its_cmd_block *its_allocate_entry(struct its_node *its)
|
|
|
|
{
|
|
|
|
struct its_cmd_block *cmd;
|
|
|
|
u32 count = 1000000; /* 1s! */
|
|
|
|
|
|
|
|
while (its_queue_full(its)) {
|
|
|
|
count--;
|
|
|
|
if (!count) {
|
|
|
|
pr_err_ratelimited("ITS queue not draining\n");
|
|
|
|
return NULL;
|
|
|
|
}
|
|
|
|
cpu_relax();
|
|
|
|
udelay(1);
|
|
|
|
}
|
|
|
|
|
|
|
|
cmd = its->cmd_write++;
|
|
|
|
|
|
|
|
/* Handle queue wrapping */
|
|
|
|
if (its->cmd_write == (its->cmd_base + ITS_CMD_QUEUE_NR_ENTRIES))
|
|
|
|
its->cmd_write = its->cmd_base;
|
|
|
|
|
2016-12-20 01:16:45 +08:00
|
|
|
/* Clear command */
|
|
|
|
cmd->raw_cmd[0] = 0;
|
|
|
|
cmd->raw_cmd[1] = 0;
|
|
|
|
cmd->raw_cmd[2] = 0;
|
|
|
|
cmd->raw_cmd[3] = 0;
|
|
|
|
|
2014-11-24 22:35:11 +08:00
|
|
|
return cmd;
|
|
|
|
}
|
|
|
|
|
|
|
|
static struct its_cmd_block *its_post_commands(struct its_node *its)
|
|
|
|
{
|
|
|
|
u64 wr = its_cmd_ptr_to_offset(its, its->cmd_write);
|
|
|
|
|
|
|
|
writel_relaxed(wr, its->base + GITS_CWRITER);
|
|
|
|
|
|
|
|
return its->cmd_write;
|
|
|
|
}
|
|
|
|
|
|
|
|
static void its_flush_cmd(struct its_node *its, struct its_cmd_block *cmd)
|
|
|
|
{
|
|
|
|
/*
|
|
|
|
* Make sure the commands written to memory are observable by
|
|
|
|
* the ITS.
|
|
|
|
*/
|
|
|
|
if (its->flags & ITS_FLAGS_CMDQ_NEEDS_FLUSHING)
|
2016-11-02 19:54:05 +08:00
|
|
|
gic_flush_dcache_to_poc(cmd, sizeof(*cmd));
|
2014-11-24 22:35:11 +08:00
|
|
|
else
|
|
|
|
dsb(ishst);
|
|
|
|
}
|
|
|
|
|
|
|
|
static void its_wait_for_range_completion(struct its_node *its,
|
|
|
|
struct its_cmd_block *from,
|
|
|
|
struct its_cmd_block *to)
|
|
|
|
{
|
|
|
|
u64 rd_idx, from_idx, to_idx;
|
|
|
|
u32 count = 1000000; /* 1s! */
|
|
|
|
|
|
|
|
from_idx = its_cmd_ptr_to_offset(its, from);
|
|
|
|
to_idx = its_cmd_ptr_to_offset(its, to);
|
|
|
|
|
|
|
|
while (1) {
|
|
|
|
rd_idx = readl_relaxed(its->base + GITS_CREADR);
|
2017-08-19 17:16:02 +08:00
|
|
|
|
|
|
|
/* Direct case */
|
|
|
|
if (from_idx < to_idx && rd_idx >= to_idx)
|
|
|
|
break;
|
|
|
|
|
|
|
|
/* Wrapped case */
|
|
|
|
if (from_idx >= to_idx && rd_idx >= to_idx && rd_idx < from_idx)
|
2014-11-24 22:35:11 +08:00
|
|
|
break;
|
|
|
|
|
|
|
|
count--;
|
|
|
|
if (!count) {
|
|
|
|
pr_err_ratelimited("ITS queue timeout\n");
|
|
|
|
return;
|
|
|
|
}
|
|
|
|
cpu_relax();
|
|
|
|
udelay(1);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
2016-12-20 01:56:32 +08:00
|
|
|
/* Warning, macro hell follows */
|
|
|
|
#define BUILD_SINGLE_CMD_FUNC(name, buildtype, synctype, buildfn) \
|
|
|
|
void name(struct its_node *its, \
|
|
|
|
buildtype builder, \
|
|
|
|
struct its_cmd_desc *desc) \
|
|
|
|
{ \
|
|
|
|
struct its_cmd_block *cmd, *sync_cmd, *next_cmd; \
|
|
|
|
synctype *sync_obj; \
|
|
|
|
unsigned long flags; \
|
|
|
|
\
|
|
|
|
raw_spin_lock_irqsave(&its->lock, flags); \
|
|
|
|
\
|
|
|
|
cmd = its_allocate_entry(its); \
|
|
|
|
if (!cmd) { /* We're soooooo screewed... */ \
|
|
|
|
raw_spin_unlock_irqrestore(&its->lock, flags); \
|
|
|
|
return; \
|
|
|
|
} \
|
|
|
|
sync_obj = builder(cmd, desc); \
|
|
|
|
its_flush_cmd(its, cmd); \
|
|
|
|
\
|
|
|
|
if (sync_obj) { \
|
|
|
|
sync_cmd = its_allocate_entry(its); \
|
|
|
|
if (!sync_cmd) \
|
|
|
|
goto post; \
|
|
|
|
\
|
|
|
|
buildfn(sync_cmd, sync_obj); \
|
|
|
|
its_flush_cmd(its, sync_cmd); \
|
|
|
|
} \
|
|
|
|
\
|
|
|
|
post: \
|
|
|
|
next_cmd = its_post_commands(its); \
|
|
|
|
raw_spin_unlock_irqrestore(&its->lock, flags); \
|
|
|
|
\
|
|
|
|
its_wait_for_range_completion(its, cmd, next_cmd); \
|
|
|
|
}
|
2014-11-24 22:35:11 +08:00
|
|
|
|
2016-12-20 01:56:32 +08:00
|
|
|
static void its_build_sync_cmd(struct its_cmd_block *sync_cmd,
|
|
|
|
struct its_collection *sync_col)
|
|
|
|
{
|
|
|
|
its_encode_cmd(sync_cmd, GITS_CMD_SYNC);
|
|
|
|
its_encode_target(sync_cmd, sync_col->target_address);
|
2014-11-24 22:35:11 +08:00
|
|
|
|
2016-12-20 01:56:32 +08:00
|
|
|
its_fixup_cmd(sync_cmd);
|
2014-11-24 22:35:11 +08:00
|
|
|
}
|
|
|
|
|
2016-12-20 01:56:32 +08:00
|
|
|
static BUILD_SINGLE_CMD_FUNC(its_send_single_command, its_cmd_builder_t,
|
|
|
|
struct its_collection, its_build_sync_cmd)
|
|
|
|
|
2016-12-20 17:44:41 +08:00
|
|
|
static void its_build_vsync_cmd(struct its_cmd_block *sync_cmd,
|
|
|
|
struct its_vpe *sync_vpe)
|
|
|
|
{
|
|
|
|
its_encode_cmd(sync_cmd, GITS_CMD_VSYNC);
|
|
|
|
its_encode_vpeid(sync_cmd, sync_vpe->vpe_id);
|
|
|
|
|
|
|
|
its_fixup_cmd(sync_cmd);
|
|
|
|
}
|
|
|
|
|
|
|
|
static BUILD_SINGLE_CMD_FUNC(its_send_single_vcommand, its_cmd_vbuilder_t,
|
|
|
|
struct its_vpe, its_build_vsync_cmd)
|
|
|
|
|
2016-12-20 02:02:13 +08:00
|
|
|
static void its_send_int(struct its_device *dev, u32 event_id)
|
|
|
|
{
|
|
|
|
struct its_cmd_desc desc;
|
|
|
|
|
|
|
|
desc.its_int_cmd.dev = dev;
|
|
|
|
desc.its_int_cmd.event_id = event_id;
|
|
|
|
|
|
|
|
its_send_single_command(dev->its, its_build_int_cmd, &desc);
|
|
|
|
}
|
|
|
|
|
|
|
|
static void its_send_clear(struct its_device *dev, u32 event_id)
|
|
|
|
{
|
|
|
|
struct its_cmd_desc desc;
|
|
|
|
|
|
|
|
desc.its_clear_cmd.dev = dev;
|
|
|
|
desc.its_clear_cmd.event_id = event_id;
|
|
|
|
|
|
|
|
its_send_single_command(dev->its, its_build_clear_cmd, &desc);
|
|
|
|
}
|
|
|
|
|
2014-11-24 22:35:11 +08:00
|
|
|
static void its_send_inv(struct its_device *dev, u32 event_id)
|
|
|
|
{
|
|
|
|
struct its_cmd_desc desc;
|
|
|
|
|
|
|
|
desc.its_inv_cmd.dev = dev;
|
|
|
|
desc.its_inv_cmd.event_id = event_id;
|
|
|
|
|
|
|
|
its_send_single_command(dev->its, its_build_inv_cmd, &desc);
|
|
|
|
}
|
|
|
|
|
|
|
|
static void its_send_mapd(struct its_device *dev, int valid)
|
|
|
|
{
|
|
|
|
struct its_cmd_desc desc;
|
|
|
|
|
|
|
|
desc.its_mapd_cmd.dev = dev;
|
|
|
|
desc.its_mapd_cmd.valid = !!valid;
|
|
|
|
|
|
|
|
its_send_single_command(dev->its, its_build_mapd_cmd, &desc);
|
|
|
|
}
|
|
|
|
|
|
|
|
static void its_send_mapc(struct its_node *its, struct its_collection *col,
|
|
|
|
int valid)
|
|
|
|
{
|
|
|
|
struct its_cmd_desc desc;
|
|
|
|
|
|
|
|
desc.its_mapc_cmd.col = col;
|
|
|
|
desc.its_mapc_cmd.valid = !!valid;
|
|
|
|
|
|
|
|
its_send_single_command(its, its_build_mapc_cmd, &desc);
|
|
|
|
}
|
|
|
|
|
2016-12-20 23:52:26 +08:00
|
|
|
static void its_send_mapti(struct its_device *dev, u32 irq_id, u32 id)
|
2014-11-24 22:35:11 +08:00
|
|
|
{
|
|
|
|
struct its_cmd_desc desc;
|
|
|
|
|
2016-12-20 23:52:26 +08:00
|
|
|
desc.its_mapti_cmd.dev = dev;
|
|
|
|
desc.its_mapti_cmd.phys_id = irq_id;
|
|
|
|
desc.its_mapti_cmd.event_id = id;
|
2014-11-24 22:35:11 +08:00
|
|
|
|
2016-12-20 23:52:26 +08:00
|
|
|
its_send_single_command(dev->its, its_build_mapti_cmd, &desc);
|
2014-11-24 22:35:11 +08:00
|
|
|
}
|
|
|
|
|
|
|
|
static void its_send_movi(struct its_device *dev,
|
|
|
|
struct its_collection *col, u32 id)
|
|
|
|
{
|
|
|
|
struct its_cmd_desc desc;
|
|
|
|
|
|
|
|
desc.its_movi_cmd.dev = dev;
|
|
|
|
desc.its_movi_cmd.col = col;
|
irqchip/gicv3-its: Fix mapping of LPIs to collections
The GICv3 ITS architecture allows a given [DevID, EventID] pair to be
translated to a [LPI, Collection] pair, where DevID is the device writing
the MSI, EventID is the payload being written, LPI is the actual
interrupt number, and Collection is roughly equivalent to a target CPU.
Each LPI can be mapped to a separate collection, but the ITS driver
insists on maintaining the collection on a device basis, instead of doing
it on a per interrupt basis.
This is obviously flawed, and this patch fixes it by adding a per interrupt
index that indicates which collection number is in use.
Reported-by: Ian Campbell <ian.campbell@citrix.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Cc: <linux-arm-kernel@lists.infradead.org>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: stable@vger.kernel.org # 4.1, 4.0
Link: http://lkml.kernel.org/r/1437126402-11677-1-git-send-email-marc.zyngier@arm.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-07-17 17:46:42 +08:00
|
|
|
desc.its_movi_cmd.event_id = id;
|
2014-11-24 22:35:11 +08:00
|
|
|
|
|
|
|
its_send_single_command(dev->its, its_build_movi_cmd, &desc);
|
|
|
|
}
|
|
|
|
|
|
|
|
static void its_send_discard(struct its_device *dev, u32 id)
|
|
|
|
{
|
|
|
|
struct its_cmd_desc desc;
|
|
|
|
|
|
|
|
desc.its_discard_cmd.dev = dev;
|
|
|
|
desc.its_discard_cmd.event_id = id;
|
|
|
|
|
|
|
|
its_send_single_command(dev->its, its_build_discard_cmd, &desc);
|
|
|
|
}
|
|
|
|
|
|
|
|
static void its_send_invall(struct its_node *its, struct its_collection *col)
|
|
|
|
{
|
|
|
|
struct its_cmd_desc desc;
|
|
|
|
|
|
|
|
desc.its_invall_cmd.col = col;
|
|
|
|
|
|
|
|
its_send_single_command(its, its_build_invall_cmd, &desc);
|
|
|
|
}
|
2014-11-24 22:35:12 +08:00
|
|
|
|
2016-12-20 17:44:41 +08:00
|
|
|
static void its_send_vmapti(struct its_device *dev, u32 id)
|
|
|
|
{
|
|
|
|
struct its_vlpi_map *map = &dev->event_map.vlpi_maps[id];
|
|
|
|
struct its_cmd_desc desc;
|
|
|
|
|
|
|
|
desc.its_vmapti_cmd.vpe = map->vpe;
|
|
|
|
desc.its_vmapti_cmd.dev = dev;
|
|
|
|
desc.its_vmapti_cmd.virt_id = map->vintid;
|
|
|
|
desc.its_vmapti_cmd.event_id = id;
|
|
|
|
desc.its_vmapti_cmd.db_enabled = map->db_enabled;
|
|
|
|
|
|
|
|
its_send_single_vcommand(dev->its, its_build_vmapti_cmd, &desc);
|
|
|
|
}
|
|
|
|
|
|
|
|
static void its_send_vmovi(struct its_device *dev, u32 id)
|
|
|
|
{
|
|
|
|
struct its_vlpi_map *map = &dev->event_map.vlpi_maps[id];
|
|
|
|
struct its_cmd_desc desc;
|
|
|
|
|
|
|
|
desc.its_vmovi_cmd.vpe = map->vpe;
|
|
|
|
desc.its_vmovi_cmd.dev = dev;
|
|
|
|
desc.its_vmovi_cmd.event_id = id;
|
|
|
|
desc.its_vmovi_cmd.db_enabled = map->db_enabled;
|
|
|
|
|
|
|
|
its_send_single_vcommand(dev->its, its_build_vmovi_cmd, &desc);
|
|
|
|
}
|
|
|
|
|
2014-11-24 22:35:12 +08:00
|
|
|
/*
|
|
|
|
* irqchip functions - assumes MSI, mostly.
|
|
|
|
*/
|
|
|
|
|
|
|
|
static inline u32 its_get_event_id(struct irq_data *d)
|
|
|
|
{
|
|
|
|
struct its_device *its_dev = irq_data_get_irq_chip_data(d);
|
irqchip/gicv3-its: Fix mapping of LPIs to collections
The GICv3 ITS architecture allows a given [DevID, EventID] pair to be
translated to a [LPI, Collection] pair, where DevID is the device writing
the MSI, EventID is the payload being written, LPI is the actual
interrupt number, and Collection is roughly equivalent to a target CPU.
Each LPI can be mapped to a separate collection, but the ITS driver
insists on maintaining the collection on a device basis, instead of doing
it on a per interrupt basis.
This is obviously flawed, and this patch fixes it by adding a per interrupt
index that indicates which collection number is in use.
Reported-by: Ian Campbell <ian.campbell@citrix.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Cc: <linux-arm-kernel@lists.infradead.org>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: stable@vger.kernel.org # 4.1, 4.0
Link: http://lkml.kernel.org/r/1437126402-11677-1-git-send-email-marc.zyngier@arm.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-07-17 17:46:42 +08:00
|
|
|
return d->hwirq - its_dev->event_map.lpi_base;
|
2014-11-24 22:35:12 +08:00
|
|
|
}
|
|
|
|
|
2016-12-20 03:18:13 +08:00
|
|
|
static void lpi_update_config(struct irq_data *d, u8 clr, u8 set)
|
2014-11-24 22:35:12 +08:00
|
|
|
{
|
|
|
|
struct its_device *its_dev = irq_data_get_irq_chip_data(d);
|
|
|
|
irq_hw_number_t hwirq = d->hwirq;
|
2016-12-20 03:18:13 +08:00
|
|
|
struct page *prop_page;
|
|
|
|
u8 *cfg;
|
2014-11-24 22:35:12 +08:00
|
|
|
|
2016-12-20 03:18:13 +08:00
|
|
|
prop_page = gic_rdists->prop_page;
|
|
|
|
|
|
|
|
cfg = page_address(prop_page) + hwirq - 8192;
|
|
|
|
*cfg &= ~clr;
|
|
|
|
*cfg |= set;
|
2014-11-24 22:35:12 +08:00
|
|
|
|
|
|
|
/*
|
|
|
|
* Make the above write visible to the redistributors.
|
|
|
|
* And yes, we're flushing exactly: One. Single. Byte.
|
|
|
|
* Humpf...
|
|
|
|
*/
|
|
|
|
if (gic_rdists->flags & RDIST_FLAGS_PROPBASE_NEEDS_FLUSHING)
|
2016-11-02 19:54:05 +08:00
|
|
|
gic_flush_dcache_to_poc(cfg, sizeof(*cfg));
|
2014-11-24 22:35:12 +08:00
|
|
|
else
|
|
|
|
dsb(ishst);
|
2016-12-20 03:18:13 +08:00
|
|
|
its_send_inv(its_dev, its_get_event_id(d));
|
2014-11-24 22:35:12 +08:00
|
|
|
}
|
|
|
|
|
|
|
|
static void its_mask_irq(struct irq_data *d)
|
|
|
|
{
|
2016-12-20 03:18:13 +08:00
|
|
|
lpi_update_config(d, LPI_PROP_ENABLED, 0);
|
2014-11-24 22:35:12 +08:00
|
|
|
}
|
|
|
|
|
|
|
|
static void its_unmask_irq(struct irq_data *d)
|
|
|
|
{
|
2016-12-20 03:18:13 +08:00
|
|
|
lpi_update_config(d, 0, LPI_PROP_ENABLED);
|
2014-11-24 22:35:12 +08:00
|
|
|
}
|
|
|
|
|
|
|
|
static int its_set_affinity(struct irq_data *d, const struct cpumask *mask_val,
|
|
|
|
bool force)
|
|
|
|
{
|
2016-05-25 21:29:20 +08:00
|
|
|
unsigned int cpu;
|
|
|
|
const struct cpumask *cpu_mask = cpu_online_mask;
|
2014-11-24 22:35:12 +08:00
|
|
|
struct its_device *its_dev = irq_data_get_irq_chip_data(d);
|
|
|
|
struct its_collection *target_col;
|
|
|
|
u32 id = its_get_event_id(d);
|
|
|
|
|
2016-05-25 21:29:20 +08:00
|
|
|
/* lpi cannot be routed to a redistributor that is on a foreign node */
|
|
|
|
if (its_dev->its->flags & ITS_FLAGS_WORKAROUND_CAVIUM_23144) {
|
|
|
|
if (its_dev->its->numa_node >= 0) {
|
|
|
|
cpu_mask = cpumask_of_node(its_dev->its->numa_node);
|
|
|
|
if (!cpumask_intersects(mask_val, cpu_mask))
|
|
|
|
return -EINVAL;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
cpu = cpumask_any_and(mask_val, cpu_mask);
|
|
|
|
|
2014-11-24 22:35:12 +08:00
|
|
|
if (cpu >= nr_cpu_ids)
|
|
|
|
return -EINVAL;
|
|
|
|
|
2017-05-18 16:19:13 +08:00
|
|
|
/* don't set the affinity when the target cpu is same as current one */
|
|
|
|
if (cpu != its_dev->event_map.col_map[id]) {
|
|
|
|
target_col = &its_dev->its->collections[cpu];
|
|
|
|
its_send_movi(its_dev, target_col, id);
|
|
|
|
its_dev->event_map.col_map[id] = cpu;
|
|
|
|
}
|
2014-11-24 22:35:12 +08:00
|
|
|
|
|
|
|
return IRQ_SET_MASK_OK_DONE;
|
|
|
|
}
|
|
|
|
|
2014-11-24 22:35:16 +08:00
|
|
|
static void its_irq_compose_msi_msg(struct irq_data *d, struct msi_msg *msg)
|
|
|
|
{
|
|
|
|
struct its_device *its_dev = irq_data_get_irq_chip_data(d);
|
|
|
|
struct its_node *its;
|
|
|
|
u64 addr;
|
|
|
|
|
|
|
|
its = its_dev->its;
|
|
|
|
addr = its->phys_base + GITS_TRANSLATER;
|
|
|
|
|
2016-11-02 19:54:03 +08:00
|
|
|
msg->address_lo = lower_32_bits(addr);
|
|
|
|
msg->address_hi = upper_32_bits(addr);
|
2014-11-24 22:35:16 +08:00
|
|
|
msg->data = its_get_event_id(d);
|
2016-09-13 00:13:59 +08:00
|
|
|
|
|
|
|
iommu_dma_map_msi_msg(d->irq, msg);
|
2014-11-24 22:35:16 +08:00
|
|
|
}
|
|
|
|
|
2016-12-20 02:02:13 +08:00
|
|
|
static int its_irq_set_irqchip_state(struct irq_data *d,
|
|
|
|
enum irqchip_irq_state which,
|
|
|
|
bool state)
|
|
|
|
{
|
|
|
|
struct its_device *its_dev = irq_data_get_irq_chip_data(d);
|
|
|
|
u32 event = its_get_event_id(d);
|
|
|
|
|
|
|
|
if (which != IRQCHIP_STATE_PENDING)
|
|
|
|
return -EINVAL;
|
|
|
|
|
|
|
|
if (state)
|
|
|
|
its_send_int(its_dev, event);
|
|
|
|
else
|
|
|
|
its_send_clear(its_dev, event);
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
2016-12-20 17:44:41 +08:00
|
|
|
static int its_vlpi_map(struct irq_data *d, struct its_cmd_info *info)
|
|
|
|
{
|
|
|
|
struct its_device *its_dev = irq_data_get_irq_chip_data(d);
|
|
|
|
u32 event = its_get_event_id(d);
|
|
|
|
int ret = 0;
|
|
|
|
|
|
|
|
if (!info->map)
|
|
|
|
return -EINVAL;
|
|
|
|
|
|
|
|
mutex_lock(&its_dev->event_map.vlpi_lock);
|
|
|
|
|
|
|
|
if (!its_dev->event_map.vm) {
|
|
|
|
struct its_vlpi_map *maps;
|
|
|
|
|
|
|
|
maps = kzalloc(sizeof(*maps) * its_dev->event_map.nr_lpis,
|
|
|
|
GFP_KERNEL);
|
|
|
|
if (!maps) {
|
|
|
|
ret = -ENOMEM;
|
|
|
|
goto out;
|
|
|
|
}
|
|
|
|
|
|
|
|
its_dev->event_map.vm = info->map->vm;
|
|
|
|
its_dev->event_map.vlpi_maps = maps;
|
|
|
|
} else if (its_dev->event_map.vm != info->map->vm) {
|
|
|
|
ret = -EINVAL;
|
|
|
|
goto out;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* Get our private copy of the mapping information */
|
|
|
|
its_dev->event_map.vlpi_maps[event] = *info->map;
|
|
|
|
|
|
|
|
if (irqd_is_forwarded_to_vcpu(d)) {
|
|
|
|
/* Already mapped, move it around */
|
|
|
|
its_send_vmovi(its_dev, event);
|
|
|
|
} else {
|
|
|
|
/* Drop the physical mapping */
|
|
|
|
its_send_discard(its_dev, event);
|
|
|
|
|
|
|
|
/* and install the virtual one */
|
|
|
|
its_send_vmapti(its_dev, event);
|
|
|
|
irqd_set_forwarded_to_vcpu(d);
|
|
|
|
|
|
|
|
/* Increment the number of VLPIs */
|
|
|
|
its_dev->event_map.nr_vlpis++;
|
|
|
|
}
|
|
|
|
|
|
|
|
out:
|
|
|
|
mutex_unlock(&its_dev->event_map.vlpi_lock);
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int its_vlpi_get(struct irq_data *d, struct its_cmd_info *info)
|
|
|
|
{
|
|
|
|
struct its_device *its_dev = irq_data_get_irq_chip_data(d);
|
|
|
|
u32 event = its_get_event_id(d);
|
|
|
|
int ret = 0;
|
|
|
|
|
|
|
|
mutex_lock(&its_dev->event_map.vlpi_lock);
|
|
|
|
|
|
|
|
if (!its_dev->event_map.vm ||
|
|
|
|
!its_dev->event_map.vlpi_maps[event].vm) {
|
|
|
|
ret = -EINVAL;
|
|
|
|
goto out;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* Copy our mapping information to the incoming request */
|
|
|
|
*info->map = its_dev->event_map.vlpi_maps[event];
|
|
|
|
|
|
|
|
out:
|
|
|
|
mutex_unlock(&its_dev->event_map.vlpi_lock);
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int its_vlpi_unmap(struct irq_data *d)
|
|
|
|
{
|
|
|
|
struct its_device *its_dev = irq_data_get_irq_chip_data(d);
|
|
|
|
u32 event = its_get_event_id(d);
|
|
|
|
int ret = 0;
|
|
|
|
|
|
|
|
mutex_lock(&its_dev->event_map.vlpi_lock);
|
|
|
|
|
|
|
|
if (!its_dev->event_map.vm || !irqd_is_forwarded_to_vcpu(d)) {
|
|
|
|
ret = -EINVAL;
|
|
|
|
goto out;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* Drop the virtual mapping */
|
|
|
|
its_send_discard(its_dev, event);
|
|
|
|
|
|
|
|
/* and restore the physical one */
|
|
|
|
irqd_clr_forwarded_to_vcpu(d);
|
|
|
|
its_send_mapti(its_dev, d->hwirq, event);
|
|
|
|
lpi_update_config(d, 0xff, (LPI_PROP_DEFAULT_PRIO |
|
|
|
|
LPI_PROP_ENABLED |
|
|
|
|
LPI_PROP_GROUP1));
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Drop the refcount and make the device available again if
|
|
|
|
* this was the last VLPI.
|
|
|
|
*/
|
|
|
|
if (!--its_dev->event_map.nr_vlpis) {
|
|
|
|
its_dev->event_map.vm = NULL;
|
|
|
|
kfree(its_dev->event_map.vlpi_maps);
|
|
|
|
}
|
|
|
|
|
|
|
|
out:
|
|
|
|
mutex_unlock(&its_dev->event_map.vlpi_lock);
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
2016-12-20 17:31:20 +08:00
|
|
|
static int its_irq_set_vcpu_affinity(struct irq_data *d, void *vcpu_info)
|
|
|
|
{
|
|
|
|
struct its_device *its_dev = irq_data_get_irq_chip_data(d);
|
|
|
|
struct its_cmd_info *info = vcpu_info;
|
|
|
|
|
|
|
|
/* Need a v4 ITS */
|
2016-12-20 17:44:41 +08:00
|
|
|
if (!its_dev->its->is_v4)
|
2016-12-20 17:31:20 +08:00
|
|
|
return -EINVAL;
|
|
|
|
|
2016-12-20 17:44:41 +08:00
|
|
|
/* Unmap request? */
|
|
|
|
if (!info)
|
|
|
|
return its_vlpi_unmap(d);
|
|
|
|
|
2016-12-20 17:31:20 +08:00
|
|
|
switch (info->cmd_type) {
|
|
|
|
case MAP_VLPI:
|
2016-12-20 17:44:41 +08:00
|
|
|
return its_vlpi_map(d, info);
|
2016-12-20 17:31:20 +08:00
|
|
|
|
|
|
|
case GET_VLPI:
|
2016-12-20 17:44:41 +08:00
|
|
|
return its_vlpi_get(d, info);
|
2016-12-20 17:31:20 +08:00
|
|
|
|
|
|
|
case PROP_UPDATE_VLPI:
|
|
|
|
case PROP_UPDATE_AND_INV_VLPI:
|
|
|
|
|
|
|
|
default:
|
|
|
|
return -EINVAL;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
2014-11-24 22:35:12 +08:00
|
|
|
static struct irq_chip its_irq_chip = {
|
|
|
|
.name = "ITS",
|
|
|
|
.irq_mask = its_mask_irq,
|
|
|
|
.irq_unmask = its_unmask_irq,
|
2016-02-11 21:38:53 +08:00
|
|
|
.irq_eoi = irq_chip_eoi_parent,
|
2014-11-24 22:35:12 +08:00
|
|
|
.irq_set_affinity = its_set_affinity,
|
2014-11-24 22:35:16 +08:00
|
|
|
.irq_compose_msi_msg = its_irq_compose_msi_msg,
|
2016-12-20 02:02:13 +08:00
|
|
|
.irq_set_irqchip_state = its_irq_set_irqchip_state,
|
2016-12-20 17:31:20 +08:00
|
|
|
.irq_set_vcpu_affinity = its_irq_set_vcpu_affinity,
|
2014-11-24 22:35:16 +08:00
|
|
|
};
|
|
|
|
|
2014-11-24 22:35:13 +08:00
|
|
|
/*
|
|
|
|
* How we allocate LPIs:
|
|
|
|
*
|
|
|
|
* The GIC has id_bits bits for interrupt identifiers. From there, we
|
|
|
|
* must subtract 8192 which are reserved for SGIs/PPIs/SPIs. Then, as
|
|
|
|
* we allocate LPIs by chunks of 32, we can shift the whole thing by 5
|
|
|
|
* bits to the right.
|
|
|
|
*
|
|
|
|
* This gives us (((1UL << id_bits) - 8192) >> 5) possible allocations.
|
|
|
|
*/
|
|
|
|
#define IRQS_PER_CHUNK_SHIFT 5
|
|
|
|
#define IRQS_PER_CHUNK (1 << IRQS_PER_CHUNK_SHIFT)
|
irqchip/gic-v3-its: Don't assume GICv3 hardware supports 16bit INTID
The current ITS driver is assuming every ITS hardware implementation
supports minimum of 16bit INTID. But this is not true, as per GICv3
specification, INTID field is IMPLEMENTATION DEFINED in the range of
14-24 bits. We might see an unpredictable system behavior on systems
where hardware support less than 16bits and software tries to use
64K LPI interrupts.
On Qualcomm Datacenter Technologies QDF2400 platform, boot log shows
confusing information about number of LPI chunks as shown below. The
QDF2400 ITS hardware supports 24bit INTID.
This patch allocates the memory resources for PEND/PROP tables based
on discoverable value which is specified in GITS_TYPER.IDbits. Also
it fixes the log message that reflects the correct number of LPI
chunks were allocated.
ITS@0xff7efe0000: allocated 524288 Devices @3c0400000 (indirect, esz 8, psz 64K, shr 1)
ITS@0xff7efe0000: allocated 8192 Interrupt Collections @3c0130000 (flat, esz 8, psz 64K, shr 1)
ITS@0xff7efe0000: allocated 8192 Virtual CPUs @3c0140000 (flat, esz 8, psz 64K, shr 1)
ITS: Allocated 524032 chunks for LPIs
PCI/MSI: ITS@0xff7efe0000 domain created
Platform MSI: ITS@0xff7efe0000 domain created
Signed-off-by: Shanker Donthineni <shankerd@codeaurora.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2017-06-23 07:19:14 +08:00
|
|
|
#define ITS_MAX_LPI_NRBITS 16 /* 64K LPIs */
|
2014-11-24 22:35:13 +08:00
|
|
|
|
|
|
|
static unsigned long *lpi_bitmap;
|
|
|
|
static u32 lpi_chunks;
|
|
|
|
static DEFINE_SPINLOCK(lpi_lock);
|
|
|
|
|
|
|
|
static int its_lpi_to_chunk(int lpi)
|
|
|
|
{
|
|
|
|
return (lpi - 8192) >> IRQS_PER_CHUNK_SHIFT;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int its_chunk_to_lpi(int chunk)
|
|
|
|
{
|
|
|
|
return (chunk << IRQS_PER_CHUNK_SHIFT) + 8192;
|
|
|
|
}
|
|
|
|
|
2016-01-19 21:11:18 +08:00
|
|
|
static int __init its_lpi_init(u32 id_bits)
|
2014-11-24 22:35:13 +08:00
|
|
|
{
|
|
|
|
lpi_chunks = its_lpi_to_chunk(1UL << id_bits);
|
|
|
|
|
|
|
|
lpi_bitmap = kzalloc(BITS_TO_LONGS(lpi_chunks) * sizeof(long),
|
|
|
|
GFP_KERNEL);
|
|
|
|
if (!lpi_bitmap) {
|
|
|
|
lpi_chunks = 0;
|
|
|
|
return -ENOMEM;
|
|
|
|
}
|
|
|
|
|
|
|
|
pr_info("ITS: Allocated %d chunks for LPIs\n", (int)lpi_chunks);
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static unsigned long *its_lpi_alloc_chunks(int nr_irqs, int *base, int *nr_ids)
|
|
|
|
{
|
|
|
|
unsigned long *bitmap = NULL;
|
|
|
|
int chunk_id;
|
|
|
|
int nr_chunks;
|
|
|
|
int i;
|
|
|
|
|
|
|
|
nr_chunks = DIV_ROUND_UP(nr_irqs, IRQS_PER_CHUNK);
|
|
|
|
|
|
|
|
spin_lock(&lpi_lock);
|
|
|
|
|
|
|
|
do {
|
|
|
|
chunk_id = bitmap_find_next_zero_area(lpi_bitmap, lpi_chunks,
|
|
|
|
0, nr_chunks, 0);
|
|
|
|
if (chunk_id < lpi_chunks)
|
|
|
|
break;
|
|
|
|
|
|
|
|
nr_chunks--;
|
|
|
|
} while (nr_chunks > 0);
|
|
|
|
|
|
|
|
if (!nr_chunks)
|
|
|
|
goto out;
|
|
|
|
|
|
|
|
bitmap = kzalloc(BITS_TO_LONGS(nr_chunks * IRQS_PER_CHUNK) * sizeof (long),
|
|
|
|
GFP_ATOMIC);
|
|
|
|
if (!bitmap)
|
|
|
|
goto out;
|
|
|
|
|
|
|
|
for (i = 0; i < nr_chunks; i++)
|
|
|
|
set_bit(chunk_id + i, lpi_bitmap);
|
|
|
|
|
|
|
|
*base = its_chunk_to_lpi(chunk_id);
|
|
|
|
*nr_ids = nr_chunks * IRQS_PER_CHUNK;
|
|
|
|
|
|
|
|
out:
|
|
|
|
spin_unlock(&lpi_lock);
|
|
|
|
|
2015-10-02 23:44:05 +08:00
|
|
|
if (!bitmap)
|
|
|
|
*base = *nr_ids = 0;
|
|
|
|
|
2014-11-24 22:35:13 +08:00
|
|
|
return bitmap;
|
|
|
|
}
|
|
|
|
|
2016-12-20 02:49:59 +08:00
|
|
|
static void its_lpi_free_chunks(unsigned long *bitmap, int base, int nr_ids)
|
2014-11-24 22:35:13 +08:00
|
|
|
{
|
|
|
|
int lpi;
|
|
|
|
|
|
|
|
spin_lock(&lpi_lock);
|
|
|
|
|
|
|
|
for (lpi = base; lpi < (base + nr_ids); lpi += IRQS_PER_CHUNK) {
|
|
|
|
int chunk = its_lpi_to_chunk(lpi);
|
2016-12-20 02:49:59 +08:00
|
|
|
|
2014-11-24 22:35:13 +08:00
|
|
|
BUG_ON(chunk > lpi_chunks);
|
|
|
|
if (test_bit(chunk, lpi_bitmap)) {
|
|
|
|
clear_bit(chunk, lpi_bitmap);
|
|
|
|
} else {
|
|
|
|
pr_err("Bad LPI chunk %d\n", chunk);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
spin_unlock(&lpi_lock);
|
|
|
|
|
2016-12-20 02:49:59 +08:00
|
|
|
kfree(bitmap);
|
2014-11-24 22:35:13 +08:00
|
|
|
}
|
2014-11-24 22:35:14 +08:00
|
|
|
|
2016-12-20 02:15:05 +08:00
|
|
|
static struct page *its_allocate_prop_table(gfp_t gfp_flags)
|
|
|
|
{
|
|
|
|
struct page *prop_page;
|
|
|
|
|
|
|
|
prop_page = alloc_pages(gfp_flags, get_order(LPI_PROPBASE_SZ));
|
|
|
|
if (!prop_page)
|
|
|
|
return NULL;
|
|
|
|
|
|
|
|
/* Priority 0xa0, Group-1, disabled */
|
|
|
|
memset(page_address(prop_page),
|
|
|
|
LPI_PROP_DEFAULT_PRIO | LPI_PROP_GROUP1,
|
|
|
|
LPI_PROPBASE_SZ);
|
|
|
|
|
|
|
|
/* Make sure the GIC will observe the written configuration */
|
|
|
|
gic_flush_dcache_to_poc(page_address(prop_page), LPI_PROPBASE_SZ);
|
|
|
|
|
|
|
|
return prop_page;
|
|
|
|
}
|
|
|
|
|
|
|
|
|
2014-11-24 22:35:14 +08:00
|
|
|
static int __init its_alloc_lpi_tables(void)
|
|
|
|
{
|
|
|
|
phys_addr_t paddr;
|
|
|
|
|
irqchip/gic-v3-its: Don't assume GICv3 hardware supports 16bit INTID
The current ITS driver is assuming every ITS hardware implementation
supports minimum of 16bit INTID. But this is not true, as per GICv3
specification, INTID field is IMPLEMENTATION DEFINED in the range of
14-24 bits. We might see an unpredictable system behavior on systems
where hardware support less than 16bits and software tries to use
64K LPI interrupts.
On Qualcomm Datacenter Technologies QDF2400 platform, boot log shows
confusing information about number of LPI chunks as shown below. The
QDF2400 ITS hardware supports 24bit INTID.
This patch allocates the memory resources for PEND/PROP tables based
on discoverable value which is specified in GITS_TYPER.IDbits. Also
it fixes the log message that reflects the correct number of LPI
chunks were allocated.
ITS@0xff7efe0000: allocated 524288 Devices @3c0400000 (indirect, esz 8, psz 64K, shr 1)
ITS@0xff7efe0000: allocated 8192 Interrupt Collections @3c0130000 (flat, esz 8, psz 64K, shr 1)
ITS@0xff7efe0000: allocated 8192 Virtual CPUs @3c0140000 (flat, esz 8, psz 64K, shr 1)
ITS: Allocated 524032 chunks for LPIs
PCI/MSI: ITS@0xff7efe0000 domain created
Platform MSI: ITS@0xff7efe0000 domain created
Signed-off-by: Shanker Donthineni <shankerd@codeaurora.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2017-06-23 07:19:14 +08:00
|
|
|
lpi_id_bits = min_t(u32, gic_rdists->id_bits, ITS_MAX_LPI_NRBITS);
|
2016-12-20 02:15:05 +08:00
|
|
|
gic_rdists->prop_page = its_allocate_prop_table(GFP_NOWAIT);
|
2014-11-24 22:35:14 +08:00
|
|
|
if (!gic_rdists->prop_page) {
|
|
|
|
pr_err("Failed to allocate PROPBASE\n");
|
|
|
|
return -ENOMEM;
|
|
|
|
}
|
|
|
|
|
|
|
|
paddr = page_to_phys(gic_rdists->prop_page);
|
|
|
|
pr_info("GIC: using LPI property table @%pa\n", &paddr);
|
|
|
|
|
irqchip/gic-v3-its: Don't assume GICv3 hardware supports 16bit INTID
The current ITS driver is assuming every ITS hardware implementation
supports minimum of 16bit INTID. But this is not true, as per GICv3
specification, INTID field is IMPLEMENTATION DEFINED in the range of
14-24 bits. We might see an unpredictable system behavior on systems
where hardware support less than 16bits and software tries to use
64K LPI interrupts.
On Qualcomm Datacenter Technologies QDF2400 platform, boot log shows
confusing information about number of LPI chunks as shown below. The
QDF2400 ITS hardware supports 24bit INTID.
This patch allocates the memory resources for PEND/PROP tables based
on discoverable value which is specified in GITS_TYPER.IDbits. Also
it fixes the log message that reflects the correct number of LPI
chunks were allocated.
ITS@0xff7efe0000: allocated 524288 Devices @3c0400000 (indirect, esz 8, psz 64K, shr 1)
ITS@0xff7efe0000: allocated 8192 Interrupt Collections @3c0130000 (flat, esz 8, psz 64K, shr 1)
ITS@0xff7efe0000: allocated 8192 Virtual CPUs @3c0140000 (flat, esz 8, psz 64K, shr 1)
ITS: Allocated 524032 chunks for LPIs
PCI/MSI: ITS@0xff7efe0000 domain created
Platform MSI: ITS@0xff7efe0000 domain created
Signed-off-by: Shanker Donthineni <shankerd@codeaurora.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2017-06-23 07:19:14 +08:00
|
|
|
return its_lpi_init(lpi_id_bits);
|
2014-11-24 22:35:14 +08:00
|
|
|
}
|
|
|
|
|
|
|
|
static const char *its_base_type_string[] = {
|
|
|
|
[GITS_BASER_TYPE_DEVICE] = "Devices",
|
|
|
|
[GITS_BASER_TYPE_VCPU] = "Virtual CPUs",
|
2016-12-20 23:50:14 +08:00
|
|
|
[GITS_BASER_TYPE_RESERVED3] = "Reserved (3)",
|
2014-11-24 22:35:14 +08:00
|
|
|
[GITS_BASER_TYPE_COLLECTION] = "Interrupt Collections",
|
|
|
|
[GITS_BASER_TYPE_RESERVED5] = "Reserved (5)",
|
|
|
|
[GITS_BASER_TYPE_RESERVED6] = "Reserved (6)",
|
|
|
|
[GITS_BASER_TYPE_RESERVED7] = "Reserved (7)",
|
|
|
|
};
|
|
|
|
|
2016-06-07 07:17:28 +08:00
|
|
|
static u64 its_read_baser(struct its_node *its, struct its_baser *baser)
|
|
|
|
{
|
|
|
|
u32 idx = baser - its->tables;
|
|
|
|
|
2016-11-02 19:54:06 +08:00
|
|
|
return gits_read_baser(its->base + GITS_BASER + (idx << 3));
|
2016-06-07 07:17:28 +08:00
|
|
|
}
|
|
|
|
|
|
|
|
static void its_write_baser(struct its_node *its, struct its_baser *baser,
|
|
|
|
u64 val)
|
|
|
|
{
|
|
|
|
u32 idx = baser - its->tables;
|
|
|
|
|
2016-11-02 19:54:06 +08:00
|
|
|
gits_write_baser(val, its->base + GITS_BASER + (idx << 3));
|
2016-06-07 07:17:28 +08:00
|
|
|
baser->val = its_read_baser(its, baser);
|
|
|
|
}
|
|
|
|
|
2016-06-07 07:17:30 +08:00
|
|
|
static int its_setup_baser(struct its_node *its, struct its_baser *baser,
|
2016-06-07 07:17:32 +08:00
|
|
|
u64 cache, u64 shr, u32 psz, u32 order,
|
|
|
|
bool indirect)
|
2016-06-07 07:17:30 +08:00
|
|
|
{
|
|
|
|
u64 val = its_read_baser(its, baser);
|
|
|
|
u64 esz = GITS_BASER_ENTRY_SIZE(val);
|
|
|
|
u64 type = GITS_BASER_TYPE(val);
|
|
|
|
u32 alloc_pages;
|
|
|
|
void *base;
|
|
|
|
u64 tmp;
|
|
|
|
|
|
|
|
retry_alloc_baser:
|
|
|
|
alloc_pages = (PAGE_ORDER_TO_SIZE(order) / psz);
|
|
|
|
if (alloc_pages > GITS_BASER_PAGES_MAX) {
|
|
|
|
pr_warn("ITS@%pa: %s too large, reduce ITS pages %u->%u\n",
|
|
|
|
&its->phys_base, its_base_type_string[type],
|
|
|
|
alloc_pages, GITS_BASER_PAGES_MAX);
|
|
|
|
alloc_pages = GITS_BASER_PAGES_MAX;
|
|
|
|
order = get_order(GITS_BASER_PAGES_MAX * psz);
|
|
|
|
}
|
|
|
|
|
|
|
|
base = (void *)__get_free_pages(GFP_KERNEL | __GFP_ZERO, order);
|
|
|
|
if (!base)
|
|
|
|
return -ENOMEM;
|
|
|
|
|
|
|
|
retry_baser:
|
|
|
|
val = (virt_to_phys(base) |
|
|
|
|
(type << GITS_BASER_TYPE_SHIFT) |
|
|
|
|
((esz - 1) << GITS_BASER_ENTRY_SIZE_SHIFT) |
|
|
|
|
((alloc_pages - 1) << GITS_BASER_PAGES_SHIFT) |
|
|
|
|
cache |
|
|
|
|
shr |
|
|
|
|
GITS_BASER_VALID);
|
|
|
|
|
2016-06-07 07:17:32 +08:00
|
|
|
val |= indirect ? GITS_BASER_INDIRECT : 0x0;
|
|
|
|
|
2016-06-07 07:17:30 +08:00
|
|
|
switch (psz) {
|
|
|
|
case SZ_4K:
|
|
|
|
val |= GITS_BASER_PAGE_SIZE_4K;
|
|
|
|
break;
|
|
|
|
case SZ_16K:
|
|
|
|
val |= GITS_BASER_PAGE_SIZE_16K;
|
|
|
|
break;
|
|
|
|
case SZ_64K:
|
|
|
|
val |= GITS_BASER_PAGE_SIZE_64K;
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
|
|
|
|
its_write_baser(its, baser, val);
|
|
|
|
tmp = baser->val;
|
|
|
|
|
|
|
|
if ((val ^ tmp) & GITS_BASER_SHAREABILITY_MASK) {
|
|
|
|
/*
|
|
|
|
* Shareability didn't stick. Just use
|
|
|
|
* whatever the read reported, which is likely
|
|
|
|
* to be the only thing this redistributor
|
|
|
|
* supports. If that's zero, make it
|
|
|
|
* non-cacheable as well.
|
|
|
|
*/
|
|
|
|
shr = tmp & GITS_BASER_SHAREABILITY_MASK;
|
|
|
|
if (!shr) {
|
|
|
|
cache = GITS_BASER_nC;
|
2016-11-02 19:54:05 +08:00
|
|
|
gic_flush_dcache_to_poc(base, PAGE_ORDER_TO_SIZE(order));
|
2016-06-07 07:17:30 +08:00
|
|
|
}
|
|
|
|
goto retry_baser;
|
|
|
|
}
|
|
|
|
|
|
|
|
if ((val ^ tmp) & GITS_BASER_PAGE_SIZE_MASK) {
|
|
|
|
/*
|
|
|
|
* Page size didn't stick. Let's try a smaller
|
|
|
|
* size and retry. If we reach 4K, then
|
|
|
|
* something is horribly wrong...
|
|
|
|
*/
|
|
|
|
free_pages((unsigned long)base, order);
|
|
|
|
baser->base = NULL;
|
|
|
|
|
|
|
|
switch (psz) {
|
|
|
|
case SZ_16K:
|
|
|
|
psz = SZ_4K;
|
|
|
|
goto retry_alloc_baser;
|
|
|
|
case SZ_64K:
|
|
|
|
psz = SZ_16K;
|
|
|
|
goto retry_alloc_baser;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
if (val != tmp) {
|
2016-11-02 19:54:03 +08:00
|
|
|
pr_err("ITS@%pa: %s doesn't stick: %llx %llx\n",
|
2016-06-07 07:17:30 +08:00
|
|
|
&its->phys_base, its_base_type_string[type],
|
2016-11-02 19:54:03 +08:00
|
|
|
val, tmp);
|
2016-06-07 07:17:30 +08:00
|
|
|
free_pages((unsigned long)base, order);
|
|
|
|
return -ENXIO;
|
|
|
|
}
|
|
|
|
|
|
|
|
baser->order = order;
|
|
|
|
baser->base = base;
|
|
|
|
baser->psz = psz;
|
2016-06-07 07:17:32 +08:00
|
|
|
tmp = indirect ? GITS_LVL1_ENTRY_SIZE : esz;
|
2016-06-07 07:17:30 +08:00
|
|
|
|
2016-06-07 07:17:32 +08:00
|
|
|
pr_info("ITS@%pa: allocated %d %s @%lx (%s, esz %d, psz %dK, shr %d)\n",
|
2016-11-02 19:54:04 +08:00
|
|
|
&its->phys_base, (int)(PAGE_ORDER_TO_SIZE(order) / (int)tmp),
|
2016-06-07 07:17:30 +08:00
|
|
|
its_base_type_string[type],
|
|
|
|
(unsigned long)virt_to_phys(base),
|
2016-06-07 07:17:32 +08:00
|
|
|
indirect ? "indirect" : "flat", (int)esz,
|
2016-06-07 07:17:30 +08:00
|
|
|
psz / SZ_1K, (int)shr >> GITS_BASER_SHAREABILITY_SHIFT);
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
2016-12-20 02:18:34 +08:00
|
|
|
static bool its_parse_indirect_baser(struct its_node *its,
|
|
|
|
struct its_baser *baser,
|
|
|
|
u32 psz, u32 *order)
|
2016-06-07 07:17:29 +08:00
|
|
|
{
|
2016-12-20 02:18:34 +08:00
|
|
|
u64 tmp = its_read_baser(its, baser);
|
|
|
|
u64 type = GITS_BASER_TYPE(tmp);
|
|
|
|
u64 esz = GITS_BASER_ENTRY_SIZE(tmp);
|
2017-01-26 11:51:41 +08:00
|
|
|
u64 val = GITS_BASER_InnerShareable | GITS_BASER_RaWaWb;
|
2016-06-07 07:17:29 +08:00
|
|
|
u32 ids = its->device_ids;
|
|
|
|
u32 new_order = *order;
|
2016-06-07 07:17:32 +08:00
|
|
|
bool indirect = false;
|
|
|
|
|
|
|
|
/* No need to enable Indirection if memory requirement < (psz*2)bytes */
|
|
|
|
if ((esz << ids) > (psz * 2)) {
|
|
|
|
/*
|
|
|
|
* Find out whether hw supports a single or two-level table by
|
|
|
|
* table by reading bit at offset '62' after writing '1' to it.
|
|
|
|
*/
|
|
|
|
its_write_baser(its, baser, val | GITS_BASER_INDIRECT);
|
|
|
|
indirect = !!(baser->val & GITS_BASER_INDIRECT);
|
|
|
|
|
|
|
|
if (indirect) {
|
|
|
|
/*
|
|
|
|
* The size of the lvl2 table is equal to ITS page size
|
|
|
|
* which is 'psz'. For computing lvl1 table size,
|
|
|
|
* subtract ID bits that sparse lvl2 table from 'ids'
|
|
|
|
* which is reported by ITS hardware times lvl1 table
|
|
|
|
* entry size.
|
|
|
|
*/
|
2016-11-02 19:54:04 +08:00
|
|
|
ids -= ilog2(psz / (int)esz);
|
2016-06-07 07:17:32 +08:00
|
|
|
esz = GITS_LVL1_ENTRY_SIZE;
|
|
|
|
}
|
|
|
|
}
|
2016-06-07 07:17:29 +08:00
|
|
|
|
|
|
|
/*
|
|
|
|
* Allocate as many entries as required to fit the
|
|
|
|
* range of device IDs that the ITS can grok... The ID
|
|
|
|
* space being incredibly sparse, this results in a
|
2016-06-07 07:17:32 +08:00
|
|
|
* massive waste of memory if two-level device table
|
|
|
|
* feature is not supported by hardware.
|
2016-06-07 07:17:29 +08:00
|
|
|
*/
|
|
|
|
new_order = max_t(u32, get_order(esz << ids), new_order);
|
|
|
|
if (new_order >= MAX_ORDER) {
|
|
|
|
new_order = MAX_ORDER - 1;
|
2016-11-02 19:54:04 +08:00
|
|
|
ids = ilog2(PAGE_ORDER_TO_SIZE(new_order) / (int)esz);
|
2016-12-20 02:18:34 +08:00
|
|
|
pr_warn("ITS@%pa: %s Table too large, reduce ids %u->%u\n",
|
|
|
|
&its->phys_base, its_base_type_string[type],
|
|
|
|
its->device_ids, ids);
|
2016-06-07 07:17:29 +08:00
|
|
|
}
|
|
|
|
|
|
|
|
*order = new_order;
|
2016-06-07 07:17:32 +08:00
|
|
|
|
|
|
|
return indirect;
|
2016-06-07 07:17:29 +08:00
|
|
|
}
|
|
|
|
|
2014-11-24 22:35:14 +08:00
|
|
|
static void its_free_tables(struct its_node *its)
|
|
|
|
{
|
|
|
|
int i;
|
|
|
|
|
|
|
|
for (i = 0; i < GITS_BASER_NR_REGS; i++) {
|
2016-02-02 10:19:44 +08:00
|
|
|
if (its->tables[i].base) {
|
|
|
|
free_pages((unsigned long)its->tables[i].base,
|
|
|
|
its->tables[i].order);
|
|
|
|
its->tables[i].base = NULL;
|
2014-11-24 22:35:14 +08:00
|
|
|
}
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
2016-06-07 07:17:31 +08:00
|
|
|
static int its_alloc_tables(struct its_node *its)
|
2014-11-24 22:35:14 +08:00
|
|
|
{
|
2016-10-14 22:13:07 +08:00
|
|
|
u64 typer = gic_read_typer(its->base + GITS_TYPER);
|
2016-06-07 07:17:30 +08:00
|
|
|
u32 ids = GITS_TYPER_DEVBITS(typer);
|
2014-11-24 22:35:14 +08:00
|
|
|
u64 shr = GITS_BASER_InnerShareable;
|
2017-01-26 11:51:41 +08:00
|
|
|
u64 cache = GITS_BASER_RaWaWb;
|
2016-06-07 07:17:30 +08:00
|
|
|
u32 psz = SZ_64K;
|
|
|
|
int err, i;
|
2015-09-22 04:58:38 +08:00
|
|
|
|
|
|
|
if (its->flags & ITS_FLAGS_WORKAROUND_CAVIUM_22375) {
|
|
|
|
/*
|
2016-06-07 07:17:30 +08:00
|
|
|
* erratum 22375: only alloc 8MB table size
|
|
|
|
* erratum 24313: ignore memory access type
|
|
|
|
*/
|
|
|
|
cache = GITS_BASER_nCnB;
|
|
|
|
ids = 0x14; /* 20 bits, 8MB */
|
2015-09-22 04:58:38 +08:00
|
|
|
}
|
2014-11-24 22:35:14 +08:00
|
|
|
|
2016-03-10 12:10:49 +08:00
|
|
|
its->device_ids = ids;
|
|
|
|
|
2014-11-24 22:35:14 +08:00
|
|
|
for (i = 0; i < GITS_BASER_NR_REGS; i++) {
|
2016-06-07 07:17:28 +08:00
|
|
|
struct its_baser *baser = its->tables + i;
|
|
|
|
u64 val = its_read_baser(its, baser);
|
2014-11-24 22:35:14 +08:00
|
|
|
u64 type = GITS_BASER_TYPE(val);
|
2016-06-07 07:17:30 +08:00
|
|
|
u32 order = get_order(psz);
|
2016-06-07 07:17:32 +08:00
|
|
|
bool indirect = false;
|
2014-11-24 22:35:14 +08:00
|
|
|
|
2016-12-20 02:18:34 +08:00
|
|
|
switch (type) {
|
|
|
|
case GITS_BASER_TYPE_NONE:
|
2014-11-24 22:35:14 +08:00
|
|
|
continue;
|
|
|
|
|
2016-12-20 02:18:34 +08:00
|
|
|
case GITS_BASER_TYPE_DEVICE:
|
|
|
|
case GITS_BASER_TYPE_VCPU:
|
|
|
|
indirect = its_parse_indirect_baser(its, baser,
|
|
|
|
psz, &order);
|
|
|
|
break;
|
|
|
|
}
|
2015-03-07 00:37:41 +08:00
|
|
|
|
2016-06-07 07:17:32 +08:00
|
|
|
err = its_setup_baser(its, baser, cache, shr, psz, order, indirect);
|
2016-06-07 07:17:30 +08:00
|
|
|
if (err < 0) {
|
|
|
|
its_free_tables(its);
|
|
|
|
return err;
|
2014-11-24 22:35:14 +08:00
|
|
|
}
|
|
|
|
|
2016-06-07 07:17:30 +08:00
|
|
|
/* Update settings which will be used for next BASERn */
|
|
|
|
psz = baser->psz;
|
|
|
|
cache = baser->val & GITS_BASER_CACHEABILITY_MASK;
|
|
|
|
shr = baser->val & GITS_BASER_SHAREABILITY_MASK;
|
2014-11-24 22:35:14 +08:00
|
|
|
}
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int its_alloc_collections(struct its_node *its)
|
|
|
|
{
|
|
|
|
its->collections = kzalloc(nr_cpu_ids * sizeof(*its->collections),
|
|
|
|
GFP_KERNEL);
|
|
|
|
if (!its->collections)
|
|
|
|
return -ENOMEM;
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
2016-12-20 02:34:38 +08:00
|
|
|
static struct page *its_allocate_pending_table(gfp_t gfp_flags)
|
|
|
|
{
|
|
|
|
struct page *pend_page;
|
|
|
|
/*
|
|
|
|
* The pending pages have to be at least 64kB aligned,
|
|
|
|
* hence the 'max(LPI_PENDBASE_SZ, SZ_64K)' below.
|
|
|
|
*/
|
|
|
|
pend_page = alloc_pages(gfp_flags | __GFP_ZERO,
|
|
|
|
get_order(max_t(u32, LPI_PENDBASE_SZ, SZ_64K)));
|
|
|
|
if (!pend_page)
|
|
|
|
return NULL;
|
|
|
|
|
|
|
|
/* Make sure the GIC will observe the zero-ed page */
|
|
|
|
gic_flush_dcache_to_poc(page_address(pend_page), LPI_PENDBASE_SZ);
|
|
|
|
|
|
|
|
return pend_page;
|
|
|
|
}
|
|
|
|
|
2014-11-24 22:35:14 +08:00
|
|
|
static void its_cpu_init_lpis(void)
|
|
|
|
{
|
|
|
|
void __iomem *rbase = gic_data_rdist_rd_base();
|
|
|
|
struct page *pend_page;
|
|
|
|
u64 val, tmp;
|
|
|
|
|
|
|
|
/* If we didn't allocate the pending table yet, do it now */
|
|
|
|
pend_page = gic_data_rdist()->pend_page;
|
|
|
|
if (!pend_page) {
|
|
|
|
phys_addr_t paddr;
|
2016-12-20 02:34:38 +08:00
|
|
|
|
|
|
|
pend_page = its_allocate_pending_table(GFP_NOWAIT);
|
2014-11-24 22:35:14 +08:00
|
|
|
if (!pend_page) {
|
|
|
|
pr_err("Failed to allocate PENDBASE for CPU%d\n",
|
|
|
|
smp_processor_id());
|
|
|
|
return;
|
|
|
|
}
|
|
|
|
|
|
|
|
paddr = page_to_phys(pend_page);
|
|
|
|
pr_info("CPU%d: using LPI pending table @%pa\n",
|
|
|
|
smp_processor_id(), &paddr);
|
|
|
|
gic_data_rdist()->pend_page = pend_page;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* Disable LPIs */
|
|
|
|
val = readl_relaxed(rbase + GICR_CTLR);
|
|
|
|
val &= ~GICR_CTLR_ENABLE_LPIS;
|
|
|
|
writel_relaxed(val, rbase + GICR_CTLR);
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Make sure any change to the table is observable by the GIC.
|
|
|
|
*/
|
|
|
|
dsb(sy);
|
|
|
|
|
|
|
|
/* set PROPBASE */
|
|
|
|
val = (page_to_phys(gic_rdists->prop_page) |
|
|
|
|
GICR_PROPBASER_InnerShareable |
|
2017-01-26 11:51:41 +08:00
|
|
|
GICR_PROPBASER_RaWaWb |
|
2014-11-24 22:35:14 +08:00
|
|
|
((LPI_NRBITS - 1) & GICR_PROPBASER_IDBITS_MASK));
|
|
|
|
|
2016-11-02 19:54:06 +08:00
|
|
|
gicr_write_propbaser(val, rbase + GICR_PROPBASER);
|
|
|
|
tmp = gicr_read_propbaser(rbase + GICR_PROPBASER);
|
2014-11-24 22:35:14 +08:00
|
|
|
|
|
|
|
if ((tmp ^ val) & GICR_PROPBASER_SHAREABILITY_MASK) {
|
2015-03-27 22:15:05 +08:00
|
|
|
if (!(tmp & GICR_PROPBASER_SHAREABILITY_MASK)) {
|
|
|
|
/*
|
|
|
|
* The HW reports non-shareable, we must
|
|
|
|
* remove the cacheability attributes as
|
|
|
|
* well.
|
|
|
|
*/
|
|
|
|
val &= ~(GICR_PROPBASER_SHAREABILITY_MASK |
|
|
|
|
GICR_PROPBASER_CACHEABILITY_MASK);
|
|
|
|
val |= GICR_PROPBASER_nC;
|
2016-11-02 19:54:06 +08:00
|
|
|
gicr_write_propbaser(val, rbase + GICR_PROPBASER);
|
2015-03-27 22:15:05 +08:00
|
|
|
}
|
2014-11-24 22:35:14 +08:00
|
|
|
pr_info_once("GIC: using cache flushing for LPI property table\n");
|
|
|
|
gic_rdists->flags |= RDIST_FLAGS_PROPBASE_NEEDS_FLUSHING;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* set PENDBASE */
|
|
|
|
val = (page_to_phys(pend_page) |
|
2015-03-27 22:15:04 +08:00
|
|
|
GICR_PENDBASER_InnerShareable |
|
2017-01-26 11:51:41 +08:00
|
|
|
GICR_PENDBASER_RaWaWb);
|
2014-11-24 22:35:14 +08:00
|
|
|
|
2016-11-02 19:54:06 +08:00
|
|
|
gicr_write_pendbaser(val, rbase + GICR_PENDBASER);
|
|
|
|
tmp = gicr_read_pendbaser(rbase + GICR_PENDBASER);
|
2015-03-27 22:15:05 +08:00
|
|
|
|
|
|
|
if (!(tmp & GICR_PENDBASER_SHAREABILITY_MASK)) {
|
|
|
|
/*
|
|
|
|
* The HW reports non-shareable, we must remove the
|
|
|
|
* cacheability attributes as well.
|
|
|
|
*/
|
|
|
|
val &= ~(GICR_PENDBASER_SHAREABILITY_MASK |
|
|
|
|
GICR_PENDBASER_CACHEABILITY_MASK);
|
|
|
|
val |= GICR_PENDBASER_nC;
|
2016-11-02 19:54:06 +08:00
|
|
|
gicr_write_pendbaser(val, rbase + GICR_PENDBASER);
|
2015-03-27 22:15:05 +08:00
|
|
|
}
|
2014-11-24 22:35:14 +08:00
|
|
|
|
|
|
|
/* Enable LPIs */
|
|
|
|
val = readl_relaxed(rbase + GICR_CTLR);
|
|
|
|
val |= GICR_CTLR_ENABLE_LPIS;
|
|
|
|
writel_relaxed(val, rbase + GICR_CTLR);
|
|
|
|
|
|
|
|
/* Make sure the GIC has seen the above */
|
|
|
|
dsb(sy);
|
|
|
|
}
|
|
|
|
|
|
|
|
static void its_cpu_init_collection(void)
|
|
|
|
{
|
|
|
|
struct its_node *its;
|
|
|
|
int cpu;
|
|
|
|
|
|
|
|
spin_lock(&its_lock);
|
|
|
|
cpu = smp_processor_id();
|
|
|
|
|
|
|
|
list_for_each_entry(its, &its_nodes, entry) {
|
|
|
|
u64 target;
|
|
|
|
|
2016-05-25 21:29:20 +08:00
|
|
|
/* avoid cross node collections and its mapping */
|
|
|
|
if (its->flags & ITS_FLAGS_WORKAROUND_CAVIUM_23144) {
|
|
|
|
struct device_node *cpu_node;
|
|
|
|
|
|
|
|
cpu_node = of_get_cpu_node(cpu, NULL);
|
|
|
|
if (its->numa_node != NUMA_NO_NODE &&
|
|
|
|
its->numa_node != of_node_to_nid(cpu_node))
|
|
|
|
continue;
|
|
|
|
}
|
|
|
|
|
2014-11-24 22:35:14 +08:00
|
|
|
/*
|
|
|
|
* We now have to bind each collection to its target
|
|
|
|
* redistributor.
|
|
|
|
*/
|
2016-10-14 22:13:07 +08:00
|
|
|
if (gic_read_typer(its->base + GITS_TYPER) & GITS_TYPER_PTA) {
|
2014-11-24 22:35:14 +08:00
|
|
|
/*
|
|
|
|
* This ITS wants the physical address of the
|
|
|
|
* redistributor.
|
|
|
|
*/
|
|
|
|
target = gic_data_rdist()->phys_base;
|
|
|
|
} else {
|
|
|
|
/*
|
|
|
|
* This ITS wants a linear CPU number.
|
|
|
|
*/
|
2016-10-14 22:13:07 +08:00
|
|
|
target = gic_read_typer(gic_data_rdist_rd_base() + GICR_TYPER);
|
2015-03-27 22:15:02 +08:00
|
|
|
target = GICR_TYPER_CPU_NUMBER(target) << 16;
|
2014-11-24 22:35:14 +08:00
|
|
|
}
|
|
|
|
|
|
|
|
/* Perform collection mapping */
|
|
|
|
its->collections[cpu].target_address = target;
|
|
|
|
its->collections[cpu].col_id = cpu;
|
|
|
|
|
|
|
|
its_send_mapc(its, &its->collections[cpu], 1);
|
|
|
|
its_send_invall(its, &its->collections[cpu]);
|
|
|
|
}
|
|
|
|
|
|
|
|
spin_unlock(&its_lock);
|
|
|
|
}
|
2014-11-24 22:35:15 +08:00
|
|
|
|
|
|
|
static struct its_device *its_find_device(struct its_node *its, u32 dev_id)
|
|
|
|
{
|
|
|
|
struct its_device *its_dev = NULL, *tmp;
|
2015-03-07 00:37:43 +08:00
|
|
|
unsigned long flags;
|
2014-11-24 22:35:15 +08:00
|
|
|
|
2015-03-07 00:37:43 +08:00
|
|
|
raw_spin_lock_irqsave(&its->lock, flags);
|
2014-11-24 22:35:15 +08:00
|
|
|
|
|
|
|
list_for_each_entry(tmp, &its->its_device_list, entry) {
|
|
|
|
if (tmp->device_id == dev_id) {
|
|
|
|
its_dev = tmp;
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
2015-03-07 00:37:43 +08:00
|
|
|
raw_spin_unlock_irqrestore(&its->lock, flags);
|
2014-11-24 22:35:15 +08:00
|
|
|
|
|
|
|
return its_dev;
|
|
|
|
}
|
|
|
|
|
2016-03-10 12:10:49 +08:00
|
|
|
static struct its_baser *its_get_baser(struct its_node *its, u32 type)
|
|
|
|
{
|
|
|
|
int i;
|
|
|
|
|
|
|
|
for (i = 0; i < GITS_BASER_NR_REGS; i++) {
|
|
|
|
if (GITS_BASER_TYPE(its->tables[i].val) == type)
|
|
|
|
return &its->tables[i];
|
|
|
|
}
|
|
|
|
|
|
|
|
return NULL;
|
|
|
|
}
|
|
|
|
|
2016-12-20 02:53:02 +08:00
|
|
|
static bool its_alloc_table_entry(struct its_baser *baser, u32 id)
|
2016-06-07 07:17:32 +08:00
|
|
|
{
|
|
|
|
struct page *page;
|
|
|
|
u32 esz, idx;
|
|
|
|
__le64 *table;
|
|
|
|
|
|
|
|
/* Don't allow device id that exceeds single, flat table limit */
|
|
|
|
esz = GITS_BASER_ENTRY_SIZE(baser->val);
|
|
|
|
if (!(baser->val & GITS_BASER_INDIRECT))
|
2016-12-20 02:53:02 +08:00
|
|
|
return (id < (PAGE_ORDER_TO_SIZE(baser->order) / esz));
|
2016-06-07 07:17:32 +08:00
|
|
|
|
|
|
|
/* Compute 1st level table index & check if that exceeds table limit */
|
2016-12-20 02:53:02 +08:00
|
|
|
idx = id >> ilog2(baser->psz / esz);
|
2016-06-07 07:17:32 +08:00
|
|
|
if (idx >= (PAGE_ORDER_TO_SIZE(baser->order) / GITS_LVL1_ENTRY_SIZE))
|
|
|
|
return false;
|
|
|
|
|
|
|
|
table = baser->base;
|
|
|
|
|
|
|
|
/* Allocate memory for 2nd level table */
|
|
|
|
if (!table[idx]) {
|
|
|
|
page = alloc_pages(GFP_KERNEL | __GFP_ZERO, get_order(baser->psz));
|
|
|
|
if (!page)
|
|
|
|
return false;
|
|
|
|
|
|
|
|
/* Flush Lvl2 table to PoC if hw doesn't support coherency */
|
|
|
|
if (!(baser->val & GITS_BASER_SHAREABILITY_MASK))
|
2016-11-02 19:54:05 +08:00
|
|
|
gic_flush_dcache_to_poc(page_address(page), baser->psz);
|
2016-06-07 07:17:32 +08:00
|
|
|
|
|
|
|
table[idx] = cpu_to_le64(page_to_phys(page) | GITS_BASER_VALID);
|
|
|
|
|
|
|
|
/* Flush Lvl1 entry to PoC if hw doesn't support coherency */
|
|
|
|
if (!(baser->val & GITS_BASER_SHAREABILITY_MASK))
|
2016-11-02 19:54:05 +08:00
|
|
|
gic_flush_dcache_to_poc(table + idx, GITS_LVL1_ENTRY_SIZE);
|
2016-06-07 07:17:32 +08:00
|
|
|
|
|
|
|
/* Ensure updated table contents are visible to ITS hardware */
|
|
|
|
dsb(sy);
|
|
|
|
}
|
|
|
|
|
|
|
|
return true;
|
|
|
|
}
|
|
|
|
|
2016-12-20 02:53:02 +08:00
|
|
|
static bool its_alloc_device_table(struct its_node *its, u32 dev_id)
|
|
|
|
{
|
|
|
|
struct its_baser *baser;
|
|
|
|
|
|
|
|
baser = its_get_baser(its, GITS_BASER_TYPE_DEVICE);
|
|
|
|
|
|
|
|
/* Don't allow device id that exceeds ITS hardware limit */
|
|
|
|
if (!baser)
|
|
|
|
return (ilog2(dev_id) < its->device_ids);
|
|
|
|
|
|
|
|
return its_alloc_table_entry(baser, dev_id);
|
|
|
|
}
|
|
|
|
|
2014-11-24 22:35:15 +08:00
|
|
|
static struct its_device *its_create_device(struct its_node *its, u32 dev_id,
|
|
|
|
int nvecs)
|
|
|
|
{
|
|
|
|
struct its_device *dev;
|
|
|
|
unsigned long *lpi_map;
|
2015-03-07 00:37:43 +08:00
|
|
|
unsigned long flags;
|
irqchip/gicv3-its: Fix mapping of LPIs to collections
The GICv3 ITS architecture allows a given [DevID, EventID] pair to be
translated to a [LPI, Collection] pair, where DevID is the device writing
the MSI, EventID is the payload being written, LPI is the actual
interrupt number, and Collection is roughly equivalent to a target CPU.
Each LPI can be mapped to a separate collection, but the ITS driver
insists on maintaining the collection on a device basis, instead of doing
it on a per interrupt basis.
This is obviously flawed, and this patch fixes it by adding a per interrupt
index that indicates which collection number is in use.
Reported-by: Ian Campbell <ian.campbell@citrix.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Cc: <linux-arm-kernel@lists.infradead.org>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: stable@vger.kernel.org # 4.1, 4.0
Link: http://lkml.kernel.org/r/1437126402-11677-1-git-send-email-marc.zyngier@arm.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-07-17 17:46:42 +08:00
|
|
|
u16 *col_map = NULL;
|
2014-11-24 22:35:15 +08:00
|
|
|
void *itt;
|
|
|
|
int lpi_base;
|
|
|
|
int nr_lpis;
|
2014-12-12 18:51:24 +08:00
|
|
|
int nr_ites;
|
2014-11-24 22:35:15 +08:00
|
|
|
int sz;
|
|
|
|
|
2016-06-07 07:17:32 +08:00
|
|
|
if (!its_alloc_device_table(its, dev_id))
|
2016-03-10 12:10:49 +08:00
|
|
|
return NULL;
|
|
|
|
|
2014-11-24 22:35:15 +08:00
|
|
|
dev = kzalloc(sizeof(*dev), GFP_KERNEL);
|
2014-12-12 18:51:24 +08:00
|
|
|
/*
|
|
|
|
* At least one bit of EventID is being used, hence a minimum
|
|
|
|
* of two entries. No, the architecture doesn't let you
|
|
|
|
* express an ITT with a single entry.
|
|
|
|
*/
|
2014-12-17 22:11:09 +08:00
|
|
|
nr_ites = max(2UL, roundup_pow_of_two(nvecs));
|
2014-12-12 18:51:24 +08:00
|
|
|
sz = nr_ites * its->ite_size;
|
2014-11-24 22:35:15 +08:00
|
|
|
sz = max(sz, ITS_ITT_ALIGN) + ITS_ITT_ALIGN - 1;
|
2015-03-07 00:37:46 +08:00
|
|
|
itt = kzalloc(sz, GFP_KERNEL);
|
2014-11-24 22:35:15 +08:00
|
|
|
lpi_map = its_lpi_alloc_chunks(nvecs, &lpi_base, &nr_lpis);
|
irqchip/gicv3-its: Fix mapping of LPIs to collections
The GICv3 ITS architecture allows a given [DevID, EventID] pair to be
translated to a [LPI, Collection] pair, where DevID is the device writing
the MSI, EventID is the payload being written, LPI is the actual
interrupt number, and Collection is roughly equivalent to a target CPU.
Each LPI can be mapped to a separate collection, but the ITS driver
insists on maintaining the collection on a device basis, instead of doing
it on a per interrupt basis.
This is obviously flawed, and this patch fixes it by adding a per interrupt
index that indicates which collection number is in use.
Reported-by: Ian Campbell <ian.campbell@citrix.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Cc: <linux-arm-kernel@lists.infradead.org>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: stable@vger.kernel.org # 4.1, 4.0
Link: http://lkml.kernel.org/r/1437126402-11677-1-git-send-email-marc.zyngier@arm.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-07-17 17:46:42 +08:00
|
|
|
if (lpi_map)
|
|
|
|
col_map = kzalloc(sizeof(*col_map) * nr_lpis, GFP_KERNEL);
|
2014-11-24 22:35:15 +08:00
|
|
|
|
irqchip/gicv3-its: Fix mapping of LPIs to collections
The GICv3 ITS architecture allows a given [DevID, EventID] pair to be
translated to a [LPI, Collection] pair, where DevID is the device writing
the MSI, EventID is the payload being written, LPI is the actual
interrupt number, and Collection is roughly equivalent to a target CPU.
Each LPI can be mapped to a separate collection, but the ITS driver
insists on maintaining the collection on a device basis, instead of doing
it on a per interrupt basis.
This is obviously flawed, and this patch fixes it by adding a per interrupt
index that indicates which collection number is in use.
Reported-by: Ian Campbell <ian.campbell@citrix.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Cc: <linux-arm-kernel@lists.infradead.org>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: stable@vger.kernel.org # 4.1, 4.0
Link: http://lkml.kernel.org/r/1437126402-11677-1-git-send-email-marc.zyngier@arm.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-07-17 17:46:42 +08:00
|
|
|
if (!dev || !itt || !lpi_map || !col_map) {
|
2014-11-24 22:35:15 +08:00
|
|
|
kfree(dev);
|
|
|
|
kfree(itt);
|
|
|
|
kfree(lpi_map);
|
irqchip/gicv3-its: Fix mapping of LPIs to collections
The GICv3 ITS architecture allows a given [DevID, EventID] pair to be
translated to a [LPI, Collection] pair, where DevID is the device writing
the MSI, EventID is the payload being written, LPI is the actual
interrupt number, and Collection is roughly equivalent to a target CPU.
Each LPI can be mapped to a separate collection, but the ITS driver
insists on maintaining the collection on a device basis, instead of doing
it on a per interrupt basis.
This is obviously flawed, and this patch fixes it by adding a per interrupt
index that indicates which collection number is in use.
Reported-by: Ian Campbell <ian.campbell@citrix.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Cc: <linux-arm-kernel@lists.infradead.org>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: stable@vger.kernel.org # 4.1, 4.0
Link: http://lkml.kernel.org/r/1437126402-11677-1-git-send-email-marc.zyngier@arm.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-07-17 17:46:42 +08:00
|
|
|
kfree(col_map);
|
2014-11-24 22:35:15 +08:00
|
|
|
return NULL;
|
|
|
|
}
|
|
|
|
|
2016-11-02 19:54:05 +08:00
|
|
|
gic_flush_dcache_to_poc(itt, sz);
|
2015-09-13 19:14:32 +08:00
|
|
|
|
2014-11-24 22:35:15 +08:00
|
|
|
dev->its = its;
|
|
|
|
dev->itt = itt;
|
2014-12-12 18:51:24 +08:00
|
|
|
dev->nr_ites = nr_ites;
|
irqchip/gicv3-its: Fix mapping of LPIs to collections
The GICv3 ITS architecture allows a given [DevID, EventID] pair to be
translated to a [LPI, Collection] pair, where DevID is the device writing
the MSI, EventID is the payload being written, LPI is the actual
interrupt number, and Collection is roughly equivalent to a target CPU.
Each LPI can be mapped to a separate collection, but the ITS driver
insists on maintaining the collection on a device basis, instead of doing
it on a per interrupt basis.
This is obviously flawed, and this patch fixes it by adding a per interrupt
index that indicates which collection number is in use.
Reported-by: Ian Campbell <ian.campbell@citrix.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Cc: <linux-arm-kernel@lists.infradead.org>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: stable@vger.kernel.org # 4.1, 4.0
Link: http://lkml.kernel.org/r/1437126402-11677-1-git-send-email-marc.zyngier@arm.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-07-17 17:46:42 +08:00
|
|
|
dev->event_map.lpi_map = lpi_map;
|
|
|
|
dev->event_map.col_map = col_map;
|
|
|
|
dev->event_map.lpi_base = lpi_base;
|
|
|
|
dev->event_map.nr_lpis = nr_lpis;
|
2016-12-20 17:44:41 +08:00
|
|
|
mutex_init(&dev->event_map.vlpi_lock);
|
2014-11-24 22:35:15 +08:00
|
|
|
dev->device_id = dev_id;
|
|
|
|
INIT_LIST_HEAD(&dev->entry);
|
|
|
|
|
2015-03-07 00:37:43 +08:00
|
|
|
raw_spin_lock_irqsave(&its->lock, flags);
|
2014-11-24 22:35:15 +08:00
|
|
|
list_add(&dev->entry, &its->its_device_list);
|
2015-03-07 00:37:43 +08:00
|
|
|
raw_spin_unlock_irqrestore(&its->lock, flags);
|
2014-11-24 22:35:15 +08:00
|
|
|
|
|
|
|
/* Map device to its ITT */
|
|
|
|
its_send_mapd(dev, 1);
|
|
|
|
|
|
|
|
return dev;
|
|
|
|
}
|
|
|
|
|
|
|
|
static void its_free_device(struct its_device *its_dev)
|
|
|
|
{
|
2015-03-07 00:37:43 +08:00
|
|
|
unsigned long flags;
|
|
|
|
|
|
|
|
raw_spin_lock_irqsave(&its_dev->its->lock, flags);
|
2014-11-24 22:35:15 +08:00
|
|
|
list_del(&its_dev->entry);
|
2015-03-07 00:37:43 +08:00
|
|
|
raw_spin_unlock_irqrestore(&its_dev->its->lock, flags);
|
2014-11-24 22:35:15 +08:00
|
|
|
kfree(its_dev->itt);
|
|
|
|
kfree(its_dev);
|
|
|
|
}
|
2014-11-24 22:35:16 +08:00
|
|
|
|
|
|
|
static int its_alloc_device_irq(struct its_device *dev, irq_hw_number_t *hwirq)
|
|
|
|
{
|
|
|
|
int idx;
|
|
|
|
|
irqchip/gicv3-its: Fix mapping of LPIs to collections
The GICv3 ITS architecture allows a given [DevID, EventID] pair to be
translated to a [LPI, Collection] pair, where DevID is the device writing
the MSI, EventID is the payload being written, LPI is the actual
interrupt number, and Collection is roughly equivalent to a target CPU.
Each LPI can be mapped to a separate collection, but the ITS driver
insists on maintaining the collection on a device basis, instead of doing
it on a per interrupt basis.
This is obviously flawed, and this patch fixes it by adding a per interrupt
index that indicates which collection number is in use.
Reported-by: Ian Campbell <ian.campbell@citrix.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Cc: <linux-arm-kernel@lists.infradead.org>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: stable@vger.kernel.org # 4.1, 4.0
Link: http://lkml.kernel.org/r/1437126402-11677-1-git-send-email-marc.zyngier@arm.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-07-17 17:46:42 +08:00
|
|
|
idx = find_first_zero_bit(dev->event_map.lpi_map,
|
|
|
|
dev->event_map.nr_lpis);
|
|
|
|
if (idx == dev->event_map.nr_lpis)
|
2014-11-24 22:35:16 +08:00
|
|
|
return -ENOSPC;
|
|
|
|
|
irqchip/gicv3-its: Fix mapping of LPIs to collections
The GICv3 ITS architecture allows a given [DevID, EventID] pair to be
translated to a [LPI, Collection] pair, where DevID is the device writing
the MSI, EventID is the payload being written, LPI is the actual
interrupt number, and Collection is roughly equivalent to a target CPU.
Each LPI can be mapped to a separate collection, but the ITS driver
insists on maintaining the collection on a device basis, instead of doing
it on a per interrupt basis.
This is obviously flawed, and this patch fixes it by adding a per interrupt
index that indicates which collection number is in use.
Reported-by: Ian Campbell <ian.campbell@citrix.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Cc: <linux-arm-kernel@lists.infradead.org>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: stable@vger.kernel.org # 4.1, 4.0
Link: http://lkml.kernel.org/r/1437126402-11677-1-git-send-email-marc.zyngier@arm.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-07-17 17:46:42 +08:00
|
|
|
*hwirq = dev->event_map.lpi_base + idx;
|
|
|
|
set_bit(idx, dev->event_map.lpi_map);
|
2014-11-24 22:35:16 +08:00
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
2015-07-28 21:46:21 +08:00
|
|
|
static int its_msi_prepare(struct irq_domain *domain, struct device *dev,
|
|
|
|
int nvec, msi_alloc_info_t *info)
|
2015-03-07 00:37:42 +08:00
|
|
|
{
|
2014-11-24 22:35:16 +08:00
|
|
|
struct its_node *its;
|
|
|
|
struct its_device *its_dev;
|
2015-07-28 21:46:21 +08:00
|
|
|
struct msi_domain_info *msi_info;
|
|
|
|
u32 dev_id;
|
|
|
|
|
|
|
|
/*
|
|
|
|
* We ignore "dev" entierely, and rely on the dev_id that has
|
|
|
|
* been passed via the scratchpad. This limits this domain's
|
|
|
|
* usefulness to upper layers that definitely know that they
|
|
|
|
* are built on top of the ITS.
|
|
|
|
*/
|
|
|
|
dev_id = info->scratchpad[0].ul;
|
|
|
|
|
|
|
|
msi_info = msi_get_domain_info(domain);
|
|
|
|
its = msi_info->data;
|
2015-03-07 00:37:42 +08:00
|
|
|
|
2015-07-28 21:46:18 +08:00
|
|
|
its_dev = its_find_device(its, dev_id);
|
2015-03-07 00:37:42 +08:00
|
|
|
if (its_dev) {
|
|
|
|
/*
|
|
|
|
* We already have seen this ID, probably through
|
|
|
|
* another alias (PCI bridge of some sort). No need to
|
|
|
|
* create the device.
|
|
|
|
*/
|
2015-07-28 21:46:18 +08:00
|
|
|
pr_debug("Reusing ITT for devID %x\n", dev_id);
|
2015-03-07 00:37:42 +08:00
|
|
|
goto out;
|
|
|
|
}
|
2014-11-24 22:35:16 +08:00
|
|
|
|
2015-07-28 21:46:18 +08:00
|
|
|
its_dev = its_create_device(its, dev_id, nvec);
|
2014-11-24 22:35:16 +08:00
|
|
|
if (!its_dev)
|
|
|
|
return -ENOMEM;
|
|
|
|
|
2015-07-28 21:46:18 +08:00
|
|
|
pr_debug("ITT %d entries, %d bits\n", nvec, ilog2(nvec));
|
2015-03-07 00:37:42 +08:00
|
|
|
out:
|
2014-11-24 22:35:16 +08:00
|
|
|
info->scratchpad[0].ptr = its_dev;
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
2015-07-28 21:46:21 +08:00
|
|
|
static struct msi_domain_ops its_msi_domain_ops = {
|
|
|
|
.msi_prepare = its_msi_prepare,
|
|
|
|
};
|
|
|
|
|
2014-11-24 22:35:16 +08:00
|
|
|
static int its_irq_gic_domain_alloc(struct irq_domain *domain,
|
|
|
|
unsigned int virq,
|
|
|
|
irq_hw_number_t hwirq)
|
|
|
|
{
|
2015-10-13 19:51:33 +08:00
|
|
|
struct irq_fwspec fwspec;
|
|
|
|
|
|
|
|
if (irq_domain_get_of_node(domain->parent)) {
|
|
|
|
fwspec.fwnode = domain->parent->fwnode;
|
|
|
|
fwspec.param_count = 3;
|
|
|
|
fwspec.param[0] = GIC_IRQ_TYPE_LPI;
|
|
|
|
fwspec.param[1] = hwirq;
|
|
|
|
fwspec.param[2] = IRQ_TYPE_EDGE_RISING;
|
2016-09-13 02:32:25 +08:00
|
|
|
} else if (is_fwnode_irqchip(domain->parent->fwnode)) {
|
|
|
|
fwspec.fwnode = domain->parent->fwnode;
|
|
|
|
fwspec.param_count = 2;
|
|
|
|
fwspec.param[0] = hwirq;
|
|
|
|
fwspec.param[1] = IRQ_TYPE_EDGE_RISING;
|
2015-10-13 19:51:33 +08:00
|
|
|
} else {
|
|
|
|
return -EINVAL;
|
|
|
|
}
|
2014-11-24 22:35:16 +08:00
|
|
|
|
2015-10-13 19:51:33 +08:00
|
|
|
return irq_domain_alloc_irqs_parent(domain, virq, 1, &fwspec);
|
2014-11-24 22:35:16 +08:00
|
|
|
}
|
|
|
|
|
|
|
|
static int its_irq_domain_alloc(struct irq_domain *domain, unsigned int virq,
|
|
|
|
unsigned int nr_irqs, void *args)
|
|
|
|
{
|
|
|
|
msi_alloc_info_t *info = args;
|
|
|
|
struct its_device *its_dev = info->scratchpad[0].ptr;
|
|
|
|
irq_hw_number_t hwirq;
|
|
|
|
int err;
|
|
|
|
int i;
|
|
|
|
|
|
|
|
for (i = 0; i < nr_irqs; i++) {
|
|
|
|
err = its_alloc_device_irq(its_dev, &hwirq);
|
|
|
|
if (err)
|
|
|
|
return err;
|
|
|
|
|
|
|
|
err = its_irq_gic_domain_alloc(domain, virq + i, hwirq);
|
|
|
|
if (err)
|
|
|
|
return err;
|
|
|
|
|
|
|
|
irq_domain_set_hwirq_and_chip(domain, virq + i,
|
|
|
|
hwirq, &its_irq_chip, its_dev);
|
2015-07-28 21:46:18 +08:00
|
|
|
pr_debug("ID:%d pID:%d vID:%d\n",
|
|
|
|
(int)(hwirq - its_dev->event_map.lpi_base),
|
|
|
|
(int) hwirq, virq + i);
|
2014-11-24 22:35:16 +08:00
|
|
|
}
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
2014-12-12 18:51:23 +08:00
|
|
|
static void its_irq_domain_activate(struct irq_domain *domain,
|
|
|
|
struct irq_data *d)
|
|
|
|
{
|
|
|
|
struct its_device *its_dev = irq_data_get_irq_chip_data(d);
|
|
|
|
u32 event = its_get_event_id(d);
|
2016-05-25 21:29:20 +08:00
|
|
|
const struct cpumask *cpu_mask = cpu_online_mask;
|
|
|
|
|
|
|
|
/* get the cpu_mask of local node */
|
|
|
|
if (its_dev->its->numa_node >= 0)
|
|
|
|
cpu_mask = cpumask_of_node(its_dev->its->numa_node);
|
2014-12-12 18:51:23 +08:00
|
|
|
|
irqchip/gicv3-its: Fix mapping of LPIs to collections
The GICv3 ITS architecture allows a given [DevID, EventID] pair to be
translated to a [LPI, Collection] pair, where DevID is the device writing
the MSI, EventID is the payload being written, LPI is the actual
interrupt number, and Collection is roughly equivalent to a target CPU.
Each LPI can be mapped to a separate collection, but the ITS driver
insists on maintaining the collection on a device basis, instead of doing
it on a per interrupt basis.
This is obviously flawed, and this patch fixes it by adding a per interrupt
index that indicates which collection number is in use.
Reported-by: Ian Campbell <ian.campbell@citrix.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Cc: <linux-arm-kernel@lists.infradead.org>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: stable@vger.kernel.org # 4.1, 4.0
Link: http://lkml.kernel.org/r/1437126402-11677-1-git-send-email-marc.zyngier@arm.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-07-17 17:46:42 +08:00
|
|
|
/* Bind the LPI to the first possible CPU */
|
2016-05-25 21:29:20 +08:00
|
|
|
its_dev->event_map.col_map[event] = cpumask_first(cpu_mask);
|
irqchip/gicv3-its: Fix mapping of LPIs to collections
The GICv3 ITS architecture allows a given [DevID, EventID] pair to be
translated to a [LPI, Collection] pair, where DevID is the device writing
the MSI, EventID is the payload being written, LPI is the actual
interrupt number, and Collection is roughly equivalent to a target CPU.
Each LPI can be mapped to a separate collection, but the ITS driver
insists on maintaining the collection on a device basis, instead of doing
it on a per interrupt basis.
This is obviously flawed, and this patch fixes it by adding a per interrupt
index that indicates which collection number is in use.
Reported-by: Ian Campbell <ian.campbell@citrix.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Cc: <linux-arm-kernel@lists.infradead.org>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: stable@vger.kernel.org # 4.1, 4.0
Link: http://lkml.kernel.org/r/1437126402-11677-1-git-send-email-marc.zyngier@arm.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-07-17 17:46:42 +08:00
|
|
|
|
2014-12-12 18:51:23 +08:00
|
|
|
/* Map the GIC IRQ and event to the device */
|
2016-12-20 23:52:26 +08:00
|
|
|
its_send_mapti(its_dev, d->hwirq, event);
|
2014-12-12 18:51:23 +08:00
|
|
|
}
|
|
|
|
|
|
|
|
static void its_irq_domain_deactivate(struct irq_domain *domain,
|
|
|
|
struct irq_data *d)
|
|
|
|
{
|
|
|
|
struct its_device *its_dev = irq_data_get_irq_chip_data(d);
|
|
|
|
u32 event = its_get_event_id(d);
|
|
|
|
|
|
|
|
/* Stop the delivery of interrupts */
|
|
|
|
its_send_discard(its_dev, event);
|
|
|
|
}
|
|
|
|
|
2014-11-24 22:35:16 +08:00
|
|
|
static void its_irq_domain_free(struct irq_domain *domain, unsigned int virq,
|
|
|
|
unsigned int nr_irqs)
|
|
|
|
{
|
|
|
|
struct irq_data *d = irq_domain_get_irq_data(domain, virq);
|
|
|
|
struct its_device *its_dev = irq_data_get_irq_chip_data(d);
|
|
|
|
int i;
|
|
|
|
|
|
|
|
for (i = 0; i < nr_irqs; i++) {
|
|
|
|
struct irq_data *data = irq_domain_get_irq_data(domain,
|
|
|
|
virq + i);
|
2014-12-12 18:51:23 +08:00
|
|
|
u32 event = its_get_event_id(data);
|
2014-11-24 22:35:16 +08:00
|
|
|
|
|
|
|
/* Mark interrupt index as unused */
|
irqchip/gicv3-its: Fix mapping of LPIs to collections
The GICv3 ITS architecture allows a given [DevID, EventID] pair to be
translated to a [LPI, Collection] pair, where DevID is the device writing
the MSI, EventID is the payload being written, LPI is the actual
interrupt number, and Collection is roughly equivalent to a target CPU.
Each LPI can be mapped to a separate collection, but the ITS driver
insists on maintaining the collection on a device basis, instead of doing
it on a per interrupt basis.
This is obviously flawed, and this patch fixes it by adding a per interrupt
index that indicates which collection number is in use.
Reported-by: Ian Campbell <ian.campbell@citrix.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Cc: <linux-arm-kernel@lists.infradead.org>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: stable@vger.kernel.org # 4.1, 4.0
Link: http://lkml.kernel.org/r/1437126402-11677-1-git-send-email-marc.zyngier@arm.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-07-17 17:46:42 +08:00
|
|
|
clear_bit(event, its_dev->event_map.lpi_map);
|
2014-11-24 22:35:16 +08:00
|
|
|
|
|
|
|
/* Nuke the entry in the domain */
|
2014-12-12 18:51:22 +08:00
|
|
|
irq_domain_reset_irq_data(data);
|
2014-11-24 22:35:16 +08:00
|
|
|
}
|
|
|
|
|
|
|
|
/* If all interrupts have been freed, start mopping the floor */
|
irqchip/gicv3-its: Fix mapping of LPIs to collections
The GICv3 ITS architecture allows a given [DevID, EventID] pair to be
translated to a [LPI, Collection] pair, where DevID is the device writing
the MSI, EventID is the payload being written, LPI is the actual
interrupt number, and Collection is roughly equivalent to a target CPU.
Each LPI can be mapped to a separate collection, but the ITS driver
insists on maintaining the collection on a device basis, instead of doing
it on a per interrupt basis.
This is obviously flawed, and this patch fixes it by adding a per interrupt
index that indicates which collection number is in use.
Reported-by: Ian Campbell <ian.campbell@citrix.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Cc: <linux-arm-kernel@lists.infradead.org>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: stable@vger.kernel.org # 4.1, 4.0
Link: http://lkml.kernel.org/r/1437126402-11677-1-git-send-email-marc.zyngier@arm.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-07-17 17:46:42 +08:00
|
|
|
if (bitmap_empty(its_dev->event_map.lpi_map,
|
|
|
|
its_dev->event_map.nr_lpis)) {
|
2016-12-20 02:49:59 +08:00
|
|
|
its_lpi_free_chunks(its_dev->event_map.lpi_map,
|
|
|
|
its_dev->event_map.lpi_base,
|
|
|
|
its_dev->event_map.nr_lpis);
|
|
|
|
kfree(its_dev->event_map.col_map);
|
2014-11-24 22:35:16 +08:00
|
|
|
|
|
|
|
/* Unmap device/itt */
|
|
|
|
its_send_mapd(its_dev, 0);
|
|
|
|
its_free_device(its_dev);
|
|
|
|
}
|
|
|
|
|
|
|
|
irq_domain_free_irqs_parent(domain, virq, nr_irqs);
|
|
|
|
}
|
|
|
|
|
|
|
|
static const struct irq_domain_ops its_domain_ops = {
|
|
|
|
.alloc = its_irq_domain_alloc,
|
|
|
|
.free = its_irq_domain_free,
|
2014-12-12 18:51:23 +08:00
|
|
|
.activate = its_irq_domain_activate,
|
|
|
|
.deactivate = its_irq_domain_deactivate,
|
2014-11-24 22:35:16 +08:00
|
|
|
};
|
2014-11-24 22:35:17 +08:00
|
|
|
|
2015-03-07 00:37:50 +08:00
|
|
|
static int its_force_quiescent(void __iomem *base)
|
|
|
|
{
|
|
|
|
u32 count = 1000000; /* 1s */
|
|
|
|
u32 val;
|
|
|
|
|
|
|
|
val = readl_relaxed(base + GITS_CTLR);
|
2016-08-19 06:41:58 +08:00
|
|
|
/*
|
|
|
|
* GIC architecture specification requires the ITS to be both
|
|
|
|
* disabled and quiescent for writes to GITS_BASER<n> or
|
|
|
|
* GITS_CBASER to not have UNPREDICTABLE results.
|
|
|
|
*/
|
|
|
|
if ((val & GITS_CTLR_QUIESCENT) && !(val & GITS_CTLR_ENABLE))
|
2015-03-07 00:37:50 +08:00
|
|
|
return 0;
|
|
|
|
|
|
|
|
/* Disable the generation of all interrupts to this ITS */
|
|
|
|
val &= ~GITS_CTLR_ENABLE;
|
|
|
|
writel_relaxed(val, base + GITS_CTLR);
|
|
|
|
|
|
|
|
/* Poll GITS_CTLR and wait until ITS becomes quiescent */
|
|
|
|
while (1) {
|
|
|
|
val = readl_relaxed(base + GITS_CTLR);
|
|
|
|
if (val & GITS_CTLR_QUIESCENT)
|
|
|
|
return 0;
|
|
|
|
|
|
|
|
count--;
|
|
|
|
if (!count)
|
|
|
|
return -EBUSY;
|
|
|
|
|
|
|
|
cpu_relax();
|
|
|
|
udelay(1);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
2015-09-22 04:58:38 +08:00
|
|
|
static void __maybe_unused its_enable_quirk_cavium_22375(void *data)
|
|
|
|
{
|
|
|
|
struct its_node *its = data;
|
|
|
|
|
|
|
|
its->flags |= ITS_FLAGS_WORKAROUND_CAVIUM_22375;
|
|
|
|
}
|
|
|
|
|
2016-05-25 21:29:20 +08:00
|
|
|
static void __maybe_unused its_enable_quirk_cavium_23144(void *data)
|
|
|
|
{
|
|
|
|
struct its_node *its = data;
|
|
|
|
|
|
|
|
its->flags |= ITS_FLAGS_WORKAROUND_CAVIUM_23144;
|
|
|
|
}
|
|
|
|
|
2017-03-07 22:20:38 +08:00
|
|
|
static void __maybe_unused its_enable_quirk_qdf2400_e0065(void *data)
|
|
|
|
{
|
|
|
|
struct its_node *its = data;
|
|
|
|
|
|
|
|
/* On QDF2400, the size of the ITE is 16Bytes */
|
|
|
|
its->ite_size = 16;
|
|
|
|
}
|
|
|
|
|
2015-09-22 04:58:37 +08:00
|
|
|
static const struct gic_quirk its_quirks[] = {
|
2015-09-22 04:58:38 +08:00
|
|
|
#ifdef CONFIG_CAVIUM_ERRATUM_22375
|
|
|
|
{
|
|
|
|
.desc = "ITS: Cavium errata 22375, 24313",
|
|
|
|
.iidr = 0xa100034c, /* ThunderX pass 1.x */
|
|
|
|
.mask = 0xffff0fff,
|
|
|
|
.init = its_enable_quirk_cavium_22375,
|
|
|
|
},
|
2016-05-25 21:29:20 +08:00
|
|
|
#endif
|
|
|
|
#ifdef CONFIG_CAVIUM_ERRATUM_23144
|
|
|
|
{
|
|
|
|
.desc = "ITS: Cavium erratum 23144",
|
|
|
|
.iidr = 0xa100034c, /* ThunderX pass 1.x */
|
|
|
|
.mask = 0xffff0fff,
|
|
|
|
.init = its_enable_quirk_cavium_23144,
|
|
|
|
},
|
2017-03-07 22:20:38 +08:00
|
|
|
#endif
|
|
|
|
#ifdef CONFIG_QCOM_QDF2400_ERRATUM_0065
|
|
|
|
{
|
|
|
|
.desc = "ITS: QDF2400 erratum 0065",
|
|
|
|
.iidr = 0x00001070, /* QDF2400 ITS rev 1.x */
|
|
|
|
.mask = 0xffffffff,
|
|
|
|
.init = its_enable_quirk_qdf2400_e0065,
|
|
|
|
},
|
2015-09-22 04:58:38 +08:00
|
|
|
#endif
|
2015-09-22 04:58:37 +08:00
|
|
|
{
|
|
|
|
}
|
|
|
|
};
|
|
|
|
|
|
|
|
static void its_enable_quirks(struct its_node *its)
|
|
|
|
{
|
|
|
|
u32 iidr = readl_relaxed(its->base + GITS_IIDR);
|
|
|
|
|
|
|
|
gic_enable_quirks(iidr, its_quirks, its);
|
|
|
|
}
|
|
|
|
|
2016-09-13 02:32:24 +08:00
|
|
|
static int its_init_domain(struct fwnode_handle *handle, struct its_node *its)
|
2016-09-13 02:32:23 +08:00
|
|
|
{
|
|
|
|
struct irq_domain *inner_domain;
|
|
|
|
struct msi_domain_info *info;
|
|
|
|
|
|
|
|
info = kzalloc(sizeof(*info), GFP_KERNEL);
|
|
|
|
if (!info)
|
|
|
|
return -ENOMEM;
|
|
|
|
|
2016-09-13 02:32:24 +08:00
|
|
|
inner_domain = irq_domain_create_tree(handle, &its_domain_ops, its);
|
2016-09-13 02:32:23 +08:00
|
|
|
if (!inner_domain) {
|
|
|
|
kfree(info);
|
|
|
|
return -ENOMEM;
|
|
|
|
}
|
|
|
|
|
2016-09-13 02:32:24 +08:00
|
|
|
inner_domain->parent = its_parent;
|
2017-06-22 18:42:50 +08:00
|
|
|
irq_domain_update_bus_token(inner_domain, DOMAIN_BUS_NEXUS);
|
2017-01-20 04:58:00 +08:00
|
|
|
inner_domain->flags |= IRQ_DOMAIN_FLAG_MSI_REMAP;
|
2016-09-13 02:32:23 +08:00
|
|
|
info->ops = &its_msi_domain_ops;
|
|
|
|
info->data = its;
|
|
|
|
inner_domain->host_data = info;
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
2016-12-20 01:25:54 +08:00
|
|
|
static int __init its_compute_its_list_map(struct resource *res,
|
|
|
|
void __iomem *its_base)
|
|
|
|
{
|
|
|
|
int its_number;
|
|
|
|
u32 ctlr;
|
|
|
|
|
|
|
|
/*
|
|
|
|
* This is assumed to be done early enough that we're
|
|
|
|
* guaranteed to be single-threaded, hence no
|
|
|
|
* locking. Should this change, we should address
|
|
|
|
* this.
|
|
|
|
*/
|
|
|
|
its_number = find_first_zero_bit(&its_list_map, ITS_LIST_MAX);
|
|
|
|
if (its_number >= ITS_LIST_MAX) {
|
|
|
|
pr_err("ITS@%pa: No ITSList entry available!\n",
|
|
|
|
&res->start);
|
|
|
|
return -EINVAL;
|
|
|
|
}
|
|
|
|
|
|
|
|
ctlr = readl_relaxed(its_base + GITS_CTLR);
|
|
|
|
ctlr &= ~GITS_CTLR_ITS_NUMBER;
|
|
|
|
ctlr |= its_number << GITS_CTLR_ITS_NUMBER_SHIFT;
|
|
|
|
writel_relaxed(ctlr, its_base + GITS_CTLR);
|
|
|
|
ctlr = readl_relaxed(its_base + GITS_CTLR);
|
|
|
|
if ((ctlr & GITS_CTLR_ITS_NUMBER) != (its_number << GITS_CTLR_ITS_NUMBER_SHIFT)) {
|
|
|
|
its_number = ctlr & GITS_CTLR_ITS_NUMBER;
|
|
|
|
its_number >>= GITS_CTLR_ITS_NUMBER_SHIFT;
|
|
|
|
}
|
|
|
|
|
|
|
|
if (test_and_set_bit(its_number, &its_list_map)) {
|
|
|
|
pr_err("ITS@%pa: Duplicate ITSList entry %d\n",
|
|
|
|
&res->start, its_number);
|
|
|
|
return -EINVAL;
|
|
|
|
}
|
|
|
|
|
|
|
|
return its_number;
|
|
|
|
}
|
|
|
|
|
2016-09-13 02:32:24 +08:00
|
|
|
static int __init its_probe_one(struct resource *res,
|
|
|
|
struct fwnode_handle *handle, int numa_node)
|
2014-11-24 22:35:17 +08:00
|
|
|
{
|
|
|
|
struct its_node *its;
|
|
|
|
void __iomem *its_base;
|
2016-12-20 01:25:54 +08:00
|
|
|
u32 val, ctlr;
|
|
|
|
u64 baser, tmp, typer;
|
2014-11-24 22:35:17 +08:00
|
|
|
int err;
|
|
|
|
|
2016-09-13 02:32:24 +08:00
|
|
|
its_base = ioremap(res->start, resource_size(res));
|
2014-11-24 22:35:17 +08:00
|
|
|
if (!its_base) {
|
2016-09-13 02:32:24 +08:00
|
|
|
pr_warn("ITS@%pa: Unable to map ITS registers\n", &res->start);
|
2014-11-24 22:35:17 +08:00
|
|
|
return -ENOMEM;
|
|
|
|
}
|
|
|
|
|
|
|
|
val = readl_relaxed(its_base + GITS_PIDR2) & GIC_PIDR2_ARCH_MASK;
|
|
|
|
if (val != 0x30 && val != 0x40) {
|
2016-09-13 02:32:24 +08:00
|
|
|
pr_warn("ITS@%pa: No ITS detected, giving up\n", &res->start);
|
2014-11-24 22:35:17 +08:00
|
|
|
err = -ENODEV;
|
|
|
|
goto out_unmap;
|
|
|
|
}
|
|
|
|
|
2015-03-07 00:37:50 +08:00
|
|
|
err = its_force_quiescent(its_base);
|
|
|
|
if (err) {
|
2016-09-13 02:32:24 +08:00
|
|
|
pr_warn("ITS@%pa: Failed to quiesce, giving up\n", &res->start);
|
2015-03-07 00:37:50 +08:00
|
|
|
goto out_unmap;
|
|
|
|
}
|
|
|
|
|
2016-09-13 02:32:24 +08:00
|
|
|
pr_info("ITS %pR\n", res);
|
2014-11-24 22:35:17 +08:00
|
|
|
|
|
|
|
its = kzalloc(sizeof(*its), GFP_KERNEL);
|
|
|
|
if (!its) {
|
|
|
|
err = -ENOMEM;
|
|
|
|
goto out_unmap;
|
|
|
|
}
|
|
|
|
|
|
|
|
raw_spin_lock_init(&its->lock);
|
|
|
|
INIT_LIST_HEAD(&its->entry);
|
|
|
|
INIT_LIST_HEAD(&its->its_device_list);
|
2016-12-20 01:25:54 +08:00
|
|
|
typer = gic_read_typer(its_base + GITS_TYPER);
|
2014-11-24 22:35:17 +08:00
|
|
|
its->base = its_base;
|
2016-09-13 02:32:24 +08:00
|
|
|
its->phys_base = res->start;
|
2016-12-20 01:25:54 +08:00
|
|
|
its->ite_size = GITS_TYPER_ITT_ENTRY_SIZE(typer);
|
|
|
|
its->is_v4 = !!(typer & GITS_TYPER_VLPIS);
|
|
|
|
if (its->is_v4) {
|
|
|
|
if (!(typer & GITS_TYPER_VMOVP)) {
|
|
|
|
err = its_compute_its_list_map(res, its_base);
|
|
|
|
if (err < 0)
|
|
|
|
goto out_free_its;
|
|
|
|
|
|
|
|
pr_info("ITS@%pa: Using ITS number %d\n",
|
|
|
|
&res->start, err);
|
|
|
|
} else {
|
|
|
|
pr_info("ITS@%pa: Single VMOVP capable\n", &res->start);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
2016-09-13 02:32:24 +08:00
|
|
|
its->numa_node = numa_node;
|
2014-11-24 22:35:17 +08:00
|
|
|
|
2017-02-02 01:38:25 +08:00
|
|
|
its->cmd_base = (void *)__get_free_pages(GFP_KERNEL | __GFP_ZERO,
|
|
|
|
get_order(ITS_CMD_QUEUE_SZ));
|
2014-11-24 22:35:17 +08:00
|
|
|
if (!its->cmd_base) {
|
|
|
|
err = -ENOMEM;
|
|
|
|
goto out_free_its;
|
|
|
|
}
|
|
|
|
its->cmd_write = its->cmd_base;
|
|
|
|
|
2015-09-22 04:58:37 +08:00
|
|
|
its_enable_quirks(its);
|
|
|
|
|
2016-06-07 07:17:31 +08:00
|
|
|
err = its_alloc_tables(its);
|
2014-11-24 22:35:17 +08:00
|
|
|
if (err)
|
|
|
|
goto out_free_cmd;
|
|
|
|
|
|
|
|
err = its_alloc_collections(its);
|
|
|
|
if (err)
|
|
|
|
goto out_free_tables;
|
|
|
|
|
|
|
|
baser = (virt_to_phys(its->cmd_base) |
|
2017-01-26 11:51:41 +08:00
|
|
|
GITS_CBASER_RaWaWb |
|
2014-11-24 22:35:17 +08:00
|
|
|
GITS_CBASER_InnerShareable |
|
|
|
|
(ITS_CMD_QUEUE_SZ / SZ_4K - 1) |
|
|
|
|
GITS_CBASER_VALID);
|
|
|
|
|
2016-11-02 19:54:06 +08:00
|
|
|
gits_write_cbaser(baser, its->base + GITS_CBASER);
|
|
|
|
tmp = gits_read_cbaser(its->base + GITS_CBASER);
|
2014-11-24 22:35:17 +08:00
|
|
|
|
2015-03-27 22:15:04 +08:00
|
|
|
if ((tmp ^ baser) & GITS_CBASER_SHAREABILITY_MASK) {
|
2015-03-27 22:15:05 +08:00
|
|
|
if (!(tmp & GITS_CBASER_SHAREABILITY_MASK)) {
|
|
|
|
/*
|
|
|
|
* The HW reports non-shareable, we must
|
|
|
|
* remove the cacheability attributes as
|
|
|
|
* well.
|
|
|
|
*/
|
|
|
|
baser &= ~(GITS_CBASER_SHAREABILITY_MASK |
|
|
|
|
GITS_CBASER_CACHEABILITY_MASK);
|
|
|
|
baser |= GITS_CBASER_nC;
|
2016-11-02 19:54:06 +08:00
|
|
|
gits_write_cbaser(baser, its->base + GITS_CBASER);
|
2015-03-27 22:15:05 +08:00
|
|
|
}
|
2014-11-24 22:35:17 +08:00
|
|
|
pr_info("ITS: using cache flushing for cmd queue\n");
|
|
|
|
its->flags |= ITS_FLAGS_CMDQ_NEEDS_FLUSHING;
|
|
|
|
}
|
|
|
|
|
2016-11-02 19:54:06 +08:00
|
|
|
gits_write_cwriter(0, its->base + GITS_CWRITER);
|
2016-12-20 01:25:54 +08:00
|
|
|
ctlr = readl_relaxed(its->base + GITS_CTLR);
|
|
|
|
writel_relaxed(ctlr | GITS_CTLR_ENABLE, its->base + GITS_CTLR);
|
2015-03-27 22:15:05 +08:00
|
|
|
|
2016-09-13 02:32:24 +08:00
|
|
|
err = its_init_domain(handle, its);
|
2016-09-13 02:32:23 +08:00
|
|
|
if (err)
|
|
|
|
goto out_free_tables;
|
2014-11-24 22:35:17 +08:00
|
|
|
|
|
|
|
spin_lock(&its_lock);
|
|
|
|
list_add(&its->entry, &its_nodes);
|
|
|
|
spin_unlock(&its_lock);
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
|
|
|
|
out_free_tables:
|
|
|
|
its_free_tables(its);
|
|
|
|
out_free_cmd:
|
2017-02-02 01:38:25 +08:00
|
|
|
free_pages((unsigned long)its->cmd_base, get_order(ITS_CMD_QUEUE_SZ));
|
2014-11-24 22:35:17 +08:00
|
|
|
out_free_its:
|
|
|
|
kfree(its);
|
|
|
|
out_unmap:
|
|
|
|
iounmap(its_base);
|
2016-09-13 02:32:24 +08:00
|
|
|
pr_err("ITS@%pa: failed probing (%d)\n", &res->start, err);
|
2014-11-24 22:35:17 +08:00
|
|
|
return err;
|
|
|
|
}
|
|
|
|
|
|
|
|
static bool gic_rdists_supports_plpis(void)
|
|
|
|
{
|
2016-10-14 22:13:07 +08:00
|
|
|
return !!(gic_read_typer(gic_data_rdist_rd_base() + GICR_TYPER) & GICR_TYPER_PLPIS);
|
2014-11-24 22:35:17 +08:00
|
|
|
}
|
|
|
|
|
|
|
|
int its_cpu_init(void)
|
|
|
|
{
|
|
|
|
if (!list_empty(&its_nodes)) {
|
2015-03-07 00:37:40 +08:00
|
|
|
if (!gic_rdists_supports_plpis()) {
|
|
|
|
pr_info("CPU%d: LPIs not supported\n", smp_processor_id());
|
|
|
|
return -ENXIO;
|
|
|
|
}
|
2014-11-24 22:35:17 +08:00
|
|
|
its_cpu_init_lpis();
|
|
|
|
its_cpu_init_collection();
|
|
|
|
}
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
2017-06-22 18:35:30 +08:00
|
|
|
static const struct of_device_id its_device_id[] = {
|
2014-11-24 22:35:17 +08:00
|
|
|
{ .compatible = "arm,gic-v3-its", },
|
|
|
|
{},
|
|
|
|
};
|
|
|
|
|
2016-09-13 02:32:24 +08:00
|
|
|
static int __init its_of_probe(struct device_node *node)
|
2014-11-24 22:35:17 +08:00
|
|
|
{
|
|
|
|
struct device_node *np;
|
2016-09-13 02:32:24 +08:00
|
|
|
struct resource res;
|
2014-11-24 22:35:17 +08:00
|
|
|
|
|
|
|
for (np = of_find_matching_node(node, its_device_id); np;
|
|
|
|
np = of_find_matching_node(np, its_device_id)) {
|
2016-09-13 02:32:23 +08:00
|
|
|
if (!of_property_read_bool(np, "msi-controller")) {
|
2017-07-19 05:43:10 +08:00
|
|
|
pr_warn("%pOF: no msi-controller property, ITS ignored\n",
|
|
|
|
np);
|
2016-09-13 02:32:23 +08:00
|
|
|
continue;
|
|
|
|
}
|
|
|
|
|
2016-09-13 02:32:24 +08:00
|
|
|
if (of_address_to_resource(np, 0, &res)) {
|
2017-07-19 05:43:10 +08:00
|
|
|
pr_warn("%pOF: no regs?\n", np);
|
2016-09-13 02:32:24 +08:00
|
|
|
continue;
|
|
|
|
}
|
|
|
|
|
|
|
|
its_probe_one(&res, &np->fwnode, of_node_to_nid(np));
|
2014-11-24 22:35:17 +08:00
|
|
|
}
|
2016-09-13 02:32:24 +08:00
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
2016-09-13 02:32:25 +08:00
|
|
|
#ifdef CONFIG_ACPI
|
|
|
|
|
|
|
|
#define ACPI_GICV3_ITS_MEM_SIZE (SZ_128K)
|
|
|
|
|
2017-06-22 14:10:12 +08:00
|
|
|
#if defined(CONFIG_ACPI_NUMA) && (ACPI_CA_VERSION >= 0x20170531)
|
|
|
|
struct its_srat_map {
|
|
|
|
/* numa node id */
|
|
|
|
u32 numa_node;
|
|
|
|
/* GIC ITS ID */
|
|
|
|
u32 its_id;
|
|
|
|
};
|
|
|
|
|
|
|
|
static struct its_srat_map its_srat_maps[MAX_NUMNODES] __initdata;
|
|
|
|
static int its_in_srat __initdata;
|
|
|
|
|
|
|
|
static int __init acpi_get_its_numa_node(u32 its_id)
|
|
|
|
{
|
|
|
|
int i;
|
|
|
|
|
|
|
|
for (i = 0; i < its_in_srat; i++) {
|
|
|
|
if (its_id == its_srat_maps[i].its_id)
|
|
|
|
return its_srat_maps[i].numa_node;
|
|
|
|
}
|
|
|
|
return NUMA_NO_NODE;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int __init gic_acpi_parse_srat_its(struct acpi_subtable_header *header,
|
|
|
|
const unsigned long end)
|
|
|
|
{
|
|
|
|
int node;
|
|
|
|
struct acpi_srat_gic_its_affinity *its_affinity;
|
|
|
|
|
|
|
|
its_affinity = (struct acpi_srat_gic_its_affinity *)header;
|
|
|
|
if (!its_affinity)
|
|
|
|
return -EINVAL;
|
|
|
|
|
|
|
|
if (its_affinity->header.length < sizeof(*its_affinity)) {
|
|
|
|
pr_err("SRAT: Invalid header length %d in ITS affinity\n",
|
|
|
|
its_affinity->header.length);
|
|
|
|
return -EINVAL;
|
|
|
|
}
|
|
|
|
|
|
|
|
if (its_in_srat >= MAX_NUMNODES) {
|
|
|
|
pr_err("SRAT: ITS affinity exceeding max count[%d]\n",
|
|
|
|
MAX_NUMNODES);
|
|
|
|
return -EINVAL;
|
|
|
|
}
|
|
|
|
|
|
|
|
node = acpi_map_pxm_to_node(its_affinity->proximity_domain);
|
|
|
|
|
|
|
|
if (node == NUMA_NO_NODE || node >= MAX_NUMNODES) {
|
|
|
|
pr_err("SRAT: Invalid NUMA node %d in ITS affinity\n", node);
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
its_srat_maps[its_in_srat].numa_node = node;
|
|
|
|
its_srat_maps[its_in_srat].its_id = its_affinity->its_id;
|
|
|
|
its_in_srat++;
|
|
|
|
pr_info("SRAT: PXM %d -> ITS %d -> Node %d\n",
|
|
|
|
its_affinity->proximity_domain, its_affinity->its_id, node);
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static void __init acpi_table_parse_srat_its(void)
|
|
|
|
{
|
|
|
|
acpi_table_parse_entries(ACPI_SIG_SRAT,
|
|
|
|
sizeof(struct acpi_table_srat),
|
|
|
|
ACPI_SRAT_TYPE_GIC_ITS_AFFINITY,
|
|
|
|
gic_acpi_parse_srat_its, 0);
|
|
|
|
}
|
|
|
|
#else
|
|
|
|
static void __init acpi_table_parse_srat_its(void) { }
|
|
|
|
static int __init acpi_get_its_numa_node(u32 its_id) { return NUMA_NO_NODE; }
|
|
|
|
#endif
|
|
|
|
|
2016-09-13 02:32:25 +08:00
|
|
|
static int __init gic_acpi_parse_madt_its(struct acpi_subtable_header *header,
|
|
|
|
const unsigned long end)
|
|
|
|
{
|
|
|
|
struct acpi_madt_generic_translator *its_entry;
|
|
|
|
struct fwnode_handle *dom_handle;
|
|
|
|
struct resource res;
|
|
|
|
int err;
|
|
|
|
|
|
|
|
its_entry = (struct acpi_madt_generic_translator *)header;
|
|
|
|
memset(&res, 0, sizeof(res));
|
|
|
|
res.start = its_entry->base_address;
|
|
|
|
res.end = its_entry->base_address + ACPI_GICV3_ITS_MEM_SIZE - 1;
|
|
|
|
res.flags = IORESOURCE_MEM;
|
|
|
|
|
|
|
|
dom_handle = irq_domain_alloc_fwnode((void *)its_entry->base_address);
|
|
|
|
if (!dom_handle) {
|
|
|
|
pr_err("ITS@%pa: Unable to allocate GICv3 ITS domain token\n",
|
|
|
|
&res.start);
|
|
|
|
return -ENOMEM;
|
|
|
|
}
|
|
|
|
|
|
|
|
err = iort_register_domain_token(its_entry->translation_id, dom_handle);
|
|
|
|
if (err) {
|
|
|
|
pr_err("ITS@%pa: Unable to register GICv3 ITS domain token (ITS ID %d) to IORT\n",
|
|
|
|
&res.start, its_entry->translation_id);
|
|
|
|
goto dom_err;
|
|
|
|
}
|
|
|
|
|
2017-06-22 14:10:12 +08:00
|
|
|
err = its_probe_one(&res, dom_handle,
|
|
|
|
acpi_get_its_numa_node(its_entry->translation_id));
|
2016-09-13 02:32:25 +08:00
|
|
|
if (!err)
|
|
|
|
return 0;
|
|
|
|
|
|
|
|
iort_deregister_domain_token(its_entry->translation_id);
|
|
|
|
dom_err:
|
|
|
|
irq_domain_free_fwnode(dom_handle);
|
|
|
|
return err;
|
|
|
|
}
|
|
|
|
|
|
|
|
static void __init its_acpi_probe(void)
|
|
|
|
{
|
2017-06-22 14:10:12 +08:00
|
|
|
acpi_table_parse_srat_its();
|
2016-09-13 02:32:25 +08:00
|
|
|
acpi_table_parse_madt(ACPI_MADT_TYPE_GENERIC_TRANSLATOR,
|
|
|
|
gic_acpi_parse_madt_its, 0);
|
|
|
|
}
|
|
|
|
#else
|
|
|
|
static void __init its_acpi_probe(void) { }
|
|
|
|
#endif
|
|
|
|
|
2016-09-13 02:32:24 +08:00
|
|
|
int __init its_init(struct fwnode_handle *handle, struct rdists *rdists,
|
|
|
|
struct irq_domain *parent_domain)
|
|
|
|
{
|
|
|
|
struct device_node *of_node;
|
|
|
|
|
|
|
|
its_parent = parent_domain;
|
|
|
|
of_node = to_of_node(handle);
|
|
|
|
if (of_node)
|
|
|
|
its_of_probe(of_node);
|
|
|
|
else
|
2016-09-13 02:32:25 +08:00
|
|
|
its_acpi_probe();
|
2014-11-24 22:35:17 +08:00
|
|
|
|
|
|
|
if (list_empty(&its_nodes)) {
|
|
|
|
pr_warn("ITS: No ITS available, not enabling LPIs\n");
|
|
|
|
return -ENXIO;
|
|
|
|
}
|
|
|
|
|
|
|
|
gic_rdists = rdists;
|
irqchip/gic-v3-its: Don't assume GICv3 hardware supports 16bit INTID
The current ITS driver is assuming every ITS hardware implementation
supports minimum of 16bit INTID. But this is not true, as per GICv3
specification, INTID field is IMPLEMENTATION DEFINED in the range of
14-24 bits. We might see an unpredictable system behavior on systems
where hardware support less than 16bits and software tries to use
64K LPI interrupts.
On Qualcomm Datacenter Technologies QDF2400 platform, boot log shows
confusing information about number of LPI chunks as shown below. The
QDF2400 ITS hardware supports 24bit INTID.
This patch allocates the memory resources for PEND/PROP tables based
on discoverable value which is specified in GITS_TYPER.IDbits. Also
it fixes the log message that reflects the correct number of LPI
chunks were allocated.
ITS@0xff7efe0000: allocated 524288 Devices @3c0400000 (indirect, esz 8, psz 64K, shr 1)
ITS@0xff7efe0000: allocated 8192 Interrupt Collections @3c0130000 (flat, esz 8, psz 64K, shr 1)
ITS@0xff7efe0000: allocated 8192 Virtual CPUs @3c0140000 (flat, esz 8, psz 64K, shr 1)
ITS: Allocated 524032 chunks for LPIs
PCI/MSI: ITS@0xff7efe0000 domain created
Platform MSI: ITS@0xff7efe0000 domain created
Signed-off-by: Shanker Donthineni <shankerd@codeaurora.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2017-06-23 07:19:14 +08:00
|
|
|
return its_alloc_lpi_tables();
|
2014-11-24 22:35:17 +08:00
|
|
|
}
|