2013-06-13 01:52:10 +08:00
|
|
|
/*
|
|
|
|
* Copyright (c) 2005-2011 Atheros Communications Inc.
|
|
|
|
* Copyright (c) 2011-2013 Qualcomm Atheros, Inc.
|
|
|
|
*
|
|
|
|
* Permission to use, copy, modify, and/or distribute this software for any
|
|
|
|
* purpose with or without fee is hereby granted, provided that the above
|
|
|
|
* copyright notice and this permission notice appear in all copies.
|
|
|
|
*
|
|
|
|
* THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
|
|
|
|
* WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
|
|
|
|
* MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
|
|
|
|
* ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
|
|
|
|
* WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
|
|
|
|
* ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
|
|
|
|
* OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
|
|
|
|
*/
|
|
|
|
|
|
|
|
#ifndef _RX_DESC_H_
|
|
|
|
#define _RX_DESC_H_
|
|
|
|
|
|
|
|
enum rx_attention_flags {
|
|
|
|
RX_ATTENTION_FLAGS_FIRST_MPDU = 1 << 0,
|
|
|
|
RX_ATTENTION_FLAGS_LAST_MPDU = 1 << 1,
|
|
|
|
RX_ATTENTION_FLAGS_MCAST_BCAST = 1 << 2,
|
|
|
|
RX_ATTENTION_FLAGS_PEER_IDX_INVALID = 1 << 3,
|
|
|
|
RX_ATTENTION_FLAGS_PEER_IDX_TIMEOUT = 1 << 4,
|
|
|
|
RX_ATTENTION_FLAGS_POWER_MGMT = 1 << 5,
|
|
|
|
RX_ATTENTION_FLAGS_NON_QOS = 1 << 6,
|
|
|
|
RX_ATTENTION_FLAGS_NULL_DATA = 1 << 7,
|
|
|
|
RX_ATTENTION_FLAGS_MGMT_TYPE = 1 << 8,
|
|
|
|
RX_ATTENTION_FLAGS_CTRL_TYPE = 1 << 9,
|
|
|
|
RX_ATTENTION_FLAGS_MORE_DATA = 1 << 10,
|
|
|
|
RX_ATTENTION_FLAGS_EOSP = 1 << 11,
|
|
|
|
RX_ATTENTION_FLAGS_U_APSD_TRIGGER = 1 << 12,
|
|
|
|
RX_ATTENTION_FLAGS_FRAGMENT = 1 << 13,
|
|
|
|
RX_ATTENTION_FLAGS_ORDER = 1 << 14,
|
|
|
|
RX_ATTENTION_FLAGS_CLASSIFICATION = 1 << 15,
|
|
|
|
RX_ATTENTION_FLAGS_OVERFLOW_ERR = 1 << 16,
|
|
|
|
RX_ATTENTION_FLAGS_MSDU_LENGTH_ERR = 1 << 17,
|
|
|
|
RX_ATTENTION_FLAGS_TCP_UDP_CHKSUM_FAIL = 1 << 18,
|
|
|
|
RX_ATTENTION_FLAGS_IP_CHKSUM_FAIL = 1 << 19,
|
|
|
|
RX_ATTENTION_FLAGS_SA_IDX_INVALID = 1 << 20,
|
|
|
|
RX_ATTENTION_FLAGS_DA_IDX_INVALID = 1 << 21,
|
|
|
|
RX_ATTENTION_FLAGS_SA_IDX_TIMEOUT = 1 << 22,
|
|
|
|
RX_ATTENTION_FLAGS_DA_IDX_TIMEOUT = 1 << 23,
|
|
|
|
RX_ATTENTION_FLAGS_ENCRYPT_REQUIRED = 1 << 24,
|
|
|
|
RX_ATTENTION_FLAGS_DIRECTED = 1 << 25,
|
|
|
|
RX_ATTENTION_FLAGS_BUFFER_FRAGMENT = 1 << 26,
|
|
|
|
RX_ATTENTION_FLAGS_MPDU_LENGTH_ERR = 1 << 27,
|
|
|
|
RX_ATTENTION_FLAGS_TKIP_MIC_ERR = 1 << 28,
|
|
|
|
RX_ATTENTION_FLAGS_DECRYPT_ERR = 1 << 29,
|
|
|
|
RX_ATTENTION_FLAGS_FCS_ERR = 1 << 30,
|
|
|
|
RX_ATTENTION_FLAGS_MSDU_DONE = 1 << 31,
|
|
|
|
};
|
|
|
|
|
|
|
|
struct rx_attention {
|
|
|
|
__le32 flags; /* %RX_ATTENTION_FLAGS_ */
|
|
|
|
} __packed;
|
|
|
|
|
|
|
|
/*
|
|
|
|
* first_mpdu
|
|
|
|
* Indicates the first MSDU of the PPDU. If both first_mpdu
|
|
|
|
* and last_mpdu are set in the MSDU then this is a not an
|
|
|
|
* A-MPDU frame but a stand alone MPDU. Interior MPDU in an
|
|
|
|
* A-MPDU shall have both first_mpdu and last_mpdu bits set to
|
|
|
|
* 0. The PPDU start status will only be valid when this bit
|
|
|
|
* is set.
|
|
|
|
*
|
|
|
|
* last_mpdu
|
|
|
|
* Indicates the last MSDU of the last MPDU of the PPDU. The
|
|
|
|
* PPDU end status will only be valid when this bit is set.
|
|
|
|
*
|
|
|
|
* mcast_bcast
|
|
|
|
* Multicast / broadcast indicator. Only set when the MAC
|
|
|
|
* address 1 bit 0 is set indicating mcast/bcast and the BSSID
|
|
|
|
* matches one of the 4 BSSID registers. Only set when
|
|
|
|
* first_msdu is set.
|
|
|
|
*
|
|
|
|
* peer_idx_invalid
|
|
|
|
* Indicates no matching entries within the the max search
|
|
|
|
* count. Only set when first_msdu is set.
|
|
|
|
*
|
|
|
|
* peer_idx_timeout
|
|
|
|
* Indicates an unsuccessful search for the peer index due to
|
|
|
|
* timeout. Only set when first_msdu is set.
|
|
|
|
*
|
|
|
|
* power_mgmt
|
|
|
|
* Power management bit set in the 802.11 header. Only set
|
|
|
|
* when first_msdu is set.
|
|
|
|
*
|
|
|
|
* non_qos
|
|
|
|
* Set if packet is not a non-QoS data frame. Only set when
|
|
|
|
* first_msdu is set.
|
|
|
|
*
|
|
|
|
* null_data
|
|
|
|
* Set if frame type indicates either null data or QoS null
|
|
|
|
* data format. Only set when first_msdu is set.
|
|
|
|
*
|
|
|
|
* mgmt_type
|
|
|
|
* Set if packet is a management packet. Only set when
|
|
|
|
* first_msdu is set.
|
|
|
|
*
|
|
|
|
* ctrl_type
|
|
|
|
* Set if packet is a control packet. Only set when first_msdu
|
|
|
|
* is set.
|
|
|
|
*
|
|
|
|
* more_data
|
|
|
|
* Set if more bit in frame control is set. Only set when
|
|
|
|
* first_msdu is set.
|
|
|
|
*
|
|
|
|
* eosp
|
|
|
|
* Set if the EOSP (end of service period) bit in the QoS
|
|
|
|
* control field is set. Only set when first_msdu is set.
|
|
|
|
*
|
|
|
|
* u_apsd_trigger
|
|
|
|
* Set if packet is U-APSD trigger. Key table will have bits
|
|
|
|
* per TID to indicate U-APSD trigger.
|
|
|
|
*
|
|
|
|
* fragment
|
|
|
|
* Indicates that this is an 802.11 fragment frame. This is
|
|
|
|
* set when either the more_frag bit is set in the frame
|
|
|
|
* control or the fragment number is not zero. Only set when
|
|
|
|
* first_msdu is set.
|
|
|
|
*
|
|
|
|
* order
|
|
|
|
* Set if the order bit in the frame control is set. Only set
|
|
|
|
* when first_msdu is set.
|
|
|
|
*
|
|
|
|
* classification
|
|
|
|
* Indicates that this status has a corresponding MSDU that
|
|
|
|
* requires FW processing. The OLE will have classification
|
|
|
|
* ring mask registers which will indicate the ring(s) for
|
|
|
|
* packets and descriptors which need FW attention.
|
|
|
|
*
|
|
|
|
* overflow_err
|
|
|
|
* PCU Receive FIFO does not have enough space to store the
|
|
|
|
* full receive packet. Enough space is reserved in the
|
|
|
|
* receive FIFO for the status is written. This MPDU remaining
|
|
|
|
* packets in the PPDU will be filtered and no Ack response
|
|
|
|
* will be transmitted.
|
|
|
|
*
|
|
|
|
* msdu_length_err
|
|
|
|
* Indicates that the MSDU length from the 802.3 encapsulated
|
|
|
|
* length field extends beyond the MPDU boundary.
|
|
|
|
*
|
|
|
|
* tcp_udp_chksum_fail
|
|
|
|
* Indicates that the computed checksum (tcp_udp_chksum) did
|
|
|
|
* not match the checksum in the TCP/UDP header.
|
|
|
|
*
|
|
|
|
* ip_chksum_fail
|
|
|
|
* Indicates that the computed checksum did not match the
|
|
|
|
* checksum in the IP header.
|
|
|
|
*
|
|
|
|
* sa_idx_invalid
|
|
|
|
* Indicates no matching entry was found in the address search
|
|
|
|
* table for the source MAC address.
|
|
|
|
*
|
|
|
|
* da_idx_invalid
|
|
|
|
* Indicates no matching entry was found in the address search
|
|
|
|
* table for the destination MAC address.
|
|
|
|
*
|
|
|
|
* sa_idx_timeout
|
|
|
|
* Indicates an unsuccessful search for the source MAC address
|
|
|
|
* due to the expiring of the search timer.
|
|
|
|
*
|
|
|
|
* da_idx_timeout
|
|
|
|
* Indicates an unsuccessful search for the destination MAC
|
|
|
|
* address due to the expiring of the search timer.
|
|
|
|
*
|
|
|
|
* encrypt_required
|
|
|
|
* Indicates that this data type frame is not encrypted even if
|
|
|
|
* the policy for this MPDU requires encryption as indicated in
|
|
|
|
* the peer table key type.
|
|
|
|
*
|
|
|
|
* directed
|
|
|
|
* MPDU is a directed packet which means that the RA matched
|
|
|
|
* our STA addresses. In proxySTA it means that the TA matched
|
|
|
|
* an entry in our address search table with the corresponding
|
|
|
|
* 'no_ack' bit is the address search entry cleared.
|
|
|
|
*
|
|
|
|
* buffer_fragment
|
|
|
|
* Indicates that at least one of the rx buffers has been
|
|
|
|
* fragmented. If set the FW should look at the rx_frag_info
|
|
|
|
* descriptor described below.
|
|
|
|
*
|
|
|
|
* mpdu_length_err
|
|
|
|
* Indicates that the MPDU was pre-maturely terminated
|
|
|
|
* resulting in a truncated MPDU. Don't trust the MPDU length
|
|
|
|
* field.
|
|
|
|
*
|
|
|
|
* tkip_mic_err
|
|
|
|
* Indicates that the MPDU Michael integrity check failed
|
|
|
|
*
|
|
|
|
* decrypt_err
|
|
|
|
* Indicates that the MPDU decrypt integrity check failed
|
|
|
|
*
|
|
|
|
* fcs_err
|
|
|
|
* Indicates that the MPDU FCS check failed
|
|
|
|
*
|
|
|
|
* msdu_done
|
|
|
|
* If set indicates that the RX packet data, RX header data, RX
|
|
|
|
* PPDU start descriptor, RX MPDU start/end descriptor, RX MSDU
|
|
|
|
* start/end descriptors and RX Attention descriptor are all
|
|
|
|
* valid. This bit must be in the last octet of the
|
|
|
|
* descriptor.
|
|
|
|
*/
|
|
|
|
|
|
|
|
struct rx_frag_info {
|
|
|
|
u8 ring0_more_count;
|
|
|
|
u8 ring1_more_count;
|
|
|
|
u8 ring2_more_count;
|
|
|
|
u8 ring3_more_count;
|
|
|
|
} __packed;
|
|
|
|
|
|
|
|
/*
|
|
|
|
* ring0_more_count
|
|
|
|
* Indicates the number of more buffers associated with RX DMA
|
|
|
|
* ring 0. Field is filled in by the RX_DMA.
|
|
|
|
*
|
|
|
|
* ring1_more_count
|
|
|
|
* Indicates the number of more buffers associated with RX DMA
|
|
|
|
* ring 1. Field is filled in by the RX_DMA.
|
|
|
|
*
|
|
|
|
* ring2_more_count
|
|
|
|
* Indicates the number of more buffers associated with RX DMA
|
|
|
|
* ring 2. Field is filled in by the RX_DMA.
|
|
|
|
*
|
|
|
|
* ring3_more_count
|
|
|
|
* Indicates the number of more buffers associated with RX DMA
|
|
|
|
* ring 3. Field is filled in by the RX_DMA.
|
|
|
|
*/
|
|
|
|
|
|
|
|
enum htt_rx_mpdu_encrypt_type {
|
|
|
|
HTT_RX_MPDU_ENCRYPT_WEP40 = 0,
|
|
|
|
HTT_RX_MPDU_ENCRYPT_WEP104 = 1,
|
|
|
|
HTT_RX_MPDU_ENCRYPT_TKIP_WITHOUT_MIC = 2,
|
|
|
|
HTT_RX_MPDU_ENCRYPT_WEP128 = 3,
|
|
|
|
HTT_RX_MPDU_ENCRYPT_TKIP_WPA = 4,
|
|
|
|
HTT_RX_MPDU_ENCRYPT_WAPI = 5,
|
|
|
|
HTT_RX_MPDU_ENCRYPT_AES_CCM_WPA2 = 6,
|
|
|
|
HTT_RX_MPDU_ENCRYPT_NONE = 7,
|
|
|
|
};
|
|
|
|
|
|
|
|
#define RX_MPDU_START_INFO0_PEER_IDX_MASK 0x000007ff
|
|
|
|
#define RX_MPDU_START_INFO0_PEER_IDX_LSB 0
|
|
|
|
#define RX_MPDU_START_INFO0_SEQ_NUM_MASK 0x0fff0000
|
|
|
|
#define RX_MPDU_START_INFO0_SEQ_NUM_LSB 16
|
|
|
|
#define RX_MPDU_START_INFO0_ENCRYPT_TYPE_MASK 0xf0000000
|
|
|
|
#define RX_MPDU_START_INFO0_ENCRYPT_TYPE_LSB 28
|
|
|
|
#define RX_MPDU_START_INFO0_FROM_DS (1 << 11)
|
|
|
|
#define RX_MPDU_START_INFO0_TO_DS (1 << 12)
|
|
|
|
#define RX_MPDU_START_INFO0_ENCRYPTED (1 << 13)
|
|
|
|
#define RX_MPDU_START_INFO0_RETRY (1 << 14)
|
|
|
|
#define RX_MPDU_START_INFO0_TXBF_H_INFO (1 << 15)
|
|
|
|
|
|
|
|
#define RX_MPDU_START_INFO1_TID_MASK 0xf0000000
|
|
|
|
#define RX_MPDU_START_INFO1_TID_LSB 28
|
|
|
|
#define RX_MPDU_START_INFO1_DIRECTED (1 << 16)
|
|
|
|
|
|
|
|
struct rx_mpdu_start {
|
|
|
|
__le32 info0;
|
|
|
|
union {
|
|
|
|
struct {
|
|
|
|
__le32 pn31_0;
|
|
|
|
__le32 info1; /* %RX_MPDU_START_INFO1_ */
|
|
|
|
} __packed;
|
|
|
|
struct {
|
|
|
|
u8 pn[6];
|
|
|
|
} __packed;
|
|
|
|
} __packed;
|
|
|
|
} __packed;
|
|
|
|
|
|
|
|
/*
|
|
|
|
* peer_idx
|
|
|
|
* The index of the address search table which associated with
|
|
|
|
* the peer table entry corresponding to this MPDU. Only valid
|
|
|
|
* when first_msdu is set.
|
|
|
|
*
|
|
|
|
* fr_ds
|
|
|
|
* Set if the from DS bit is set in the frame control. Only
|
|
|
|
* valid when first_msdu is set.
|
|
|
|
*
|
|
|
|
* to_ds
|
|
|
|
* Set if the to DS bit is set in the frame control. Only
|
|
|
|
* valid when first_msdu is set.
|
|
|
|
*
|
|
|
|
* encrypted
|
|
|
|
* Protected bit from the frame control. Only valid when
|
|
|
|
* first_msdu is set.
|
|
|
|
*
|
|
|
|
* retry
|
|
|
|
* Retry bit from the frame control. Only valid when
|
|
|
|
* first_msdu is set.
|
|
|
|
*
|
|
|
|
* txbf_h_info
|
|
|
|
* The MPDU data will contain H information. Primarily used
|
|
|
|
* for debug.
|
|
|
|
*
|
|
|
|
* seq_num
|
|
|
|
* The sequence number from the 802.11 header. Only valid when
|
|
|
|
* first_msdu is set.
|
|
|
|
*
|
|
|
|
* encrypt_type
|
|
|
|
* Indicates type of decrypt cipher used (as defined in the
|
|
|
|
* peer table)
|
|
|
|
* 0: WEP40
|
|
|
|
* 1: WEP104
|
|
|
|
* 2: TKIP without MIC
|
|
|
|
* 3: WEP128
|
|
|
|
* 4: TKIP (WPA)
|
|
|
|
* 5: WAPI
|
|
|
|
* 6: AES-CCM (WPA2)
|
|
|
|
* 7: No cipher
|
|
|
|
* Only valid when first_msdu_is set
|
|
|
|
*
|
|
|
|
* pn_31_0
|
|
|
|
* Bits [31:0] of the PN number extracted from the IV field
|
|
|
|
* WEP: IV = {key_id_octet, pn2, pn1, pn0}. Only pn[23:0] is
|
|
|
|
* valid.
|
|
|
|
* TKIP: IV = {pn5, pn4, pn3, pn2, key_id_octet, pn0,
|
|
|
|
* WEPSeed[1], pn1}. Only pn[47:0] is valid.
|
|
|
|
* AES-CCM: IV = {pn5, pn4, pn3, pn2, key_id_octet, 0x0, pn1,
|
|
|
|
* pn0}. Only pn[47:0] is valid.
|
|
|
|
* WAPI: IV = {key_id_octet, 0x0, pn15, pn14, pn13, pn12, pn11,
|
|
|
|
* pn10, pn9, pn8, pn7, pn6, pn5, pn4, pn3, pn2, pn1, pn0}.
|
|
|
|
* The ext_wapi_pn[127:48] in the rx_msdu_misc descriptor and
|
|
|
|
* pn[47:0] are valid.
|
|
|
|
* Only valid when first_msdu is set.
|
|
|
|
*
|
|
|
|
* pn_47_32
|
|
|
|
* Bits [47:32] of the PN number. See description for
|
|
|
|
* pn_31_0. The remaining PN fields are in the rx_msdu_end
|
|
|
|
* descriptor
|
|
|
|
*
|
|
|
|
* pn
|
|
|
|
* Use this field to access the pn without worrying about
|
|
|
|
* byte-order and bitmasking/bitshifting.
|
|
|
|
*
|
|
|
|
* directed
|
|
|
|
* See definition in RX attention descriptor
|
|
|
|
*
|
|
|
|
* reserved_2
|
|
|
|
* Reserved: HW should fill with zero. FW should ignore.
|
|
|
|
*
|
|
|
|
* tid
|
|
|
|
* The TID field in the QoS control field
|
|
|
|
*/
|
|
|
|
|
|
|
|
#define RX_MPDU_END_INFO0_RESERVED_0_MASK 0x00001fff
|
|
|
|
#define RX_MPDU_END_INFO0_RESERVED_0_LSB 0
|
|
|
|
#define RX_MPDU_END_INFO0_POST_DELIM_CNT_MASK 0x0fff0000
|
|
|
|
#define RX_MPDU_END_INFO0_POST_DELIM_CNT_LSB 16
|
|
|
|
#define RX_MPDU_END_INFO0_OVERFLOW_ERR (1 << 13)
|
|
|
|
#define RX_MPDU_END_INFO0_LAST_MPDU (1 << 14)
|
|
|
|
#define RX_MPDU_END_INFO0_POST_DELIM_ERR (1 << 15)
|
|
|
|
#define RX_MPDU_END_INFO0_MPDU_LENGTH_ERR (1 << 28)
|
|
|
|
#define RX_MPDU_END_INFO0_TKIP_MIC_ERR (1 << 29)
|
|
|
|
#define RX_MPDU_END_INFO0_DECRYPT_ERR (1 << 30)
|
|
|
|
#define RX_MPDU_END_INFO0_FCS_ERR (1 << 31)
|
|
|
|
|
|
|
|
struct rx_mpdu_end {
|
|
|
|
__le32 info0;
|
|
|
|
} __packed;
|
|
|
|
|
|
|
|
/*
|
|
|
|
* reserved_0
|
|
|
|
* Reserved
|
|
|
|
*
|
|
|
|
* overflow_err
|
|
|
|
* PCU Receive FIFO does not have enough space to store the
|
|
|
|
* full receive packet. Enough space is reserved in the
|
|
|
|
* receive FIFO for the status is written. This MPDU remaining
|
|
|
|
* packets in the PPDU will be filtered and no Ack response
|
|
|
|
* will be transmitted.
|
|
|
|
*
|
|
|
|
* last_mpdu
|
|
|
|
* Indicates that this is the last MPDU of a PPDU.
|
|
|
|
*
|
|
|
|
* post_delim_err
|
|
|
|
* Indicates that a delimiter FCS error occurred after this
|
|
|
|
* MPDU before the next MPDU. Only valid when last_msdu is
|
|
|
|
* set.
|
|
|
|
*
|
|
|
|
* post_delim_cnt
|
|
|
|
* Count of the delimiters after this MPDU. This requires the
|
|
|
|
* last MPDU to be held until all the EOF descriptors have been
|
|
|
|
* received. This may be inefficient in the future when
|
|
|
|
* ML-MIMO is used. Only valid when last_mpdu is set.
|
|
|
|
*
|
|
|
|
* mpdu_length_err
|
|
|
|
* See definition in RX attention descriptor
|
|
|
|
*
|
|
|
|
* tkip_mic_err
|
|
|
|
* See definition in RX attention descriptor
|
|
|
|
*
|
|
|
|
* decrypt_err
|
|
|
|
* See definition in RX attention descriptor
|
|
|
|
*
|
|
|
|
* fcs_err
|
|
|
|
* See definition in RX attention descriptor
|
|
|
|
*/
|
|
|
|
|
|
|
|
#define RX_MSDU_START_INFO0_MSDU_LENGTH_MASK 0x00003fff
|
|
|
|
#define RX_MSDU_START_INFO0_MSDU_LENGTH_LSB 0
|
|
|
|
#define RX_MSDU_START_INFO0_IP_OFFSET_MASK 0x000fc000
|
|
|
|
#define RX_MSDU_START_INFO0_IP_OFFSET_LSB 14
|
|
|
|
#define RX_MSDU_START_INFO0_RING_MASK_MASK 0x00f00000
|
|
|
|
#define RX_MSDU_START_INFO0_RING_MASK_LSB 20
|
|
|
|
#define RX_MSDU_START_INFO0_TCP_UDP_OFFSET_MASK 0x7f000000
|
|
|
|
#define RX_MSDU_START_INFO0_TCP_UDP_OFFSET_LSB 24
|
|
|
|
|
|
|
|
#define RX_MSDU_START_INFO1_MSDU_NUMBER_MASK 0x000000ff
|
|
|
|
#define RX_MSDU_START_INFO1_MSDU_NUMBER_LSB 0
|
|
|
|
#define RX_MSDU_START_INFO1_DECAP_FORMAT_MASK 0x00000300
|
|
|
|
#define RX_MSDU_START_INFO1_DECAP_FORMAT_LSB 8
|
|
|
|
#define RX_MSDU_START_INFO1_SA_IDX_MASK 0x07ff0000
|
|
|
|
#define RX_MSDU_START_INFO1_SA_IDX_LSB 16
|
|
|
|
#define RX_MSDU_START_INFO1_IPV4_PROTO (1 << 10)
|
|
|
|
#define RX_MSDU_START_INFO1_IPV6_PROTO (1 << 11)
|
|
|
|
#define RX_MSDU_START_INFO1_TCP_PROTO (1 << 12)
|
|
|
|
#define RX_MSDU_START_INFO1_UDP_PROTO (1 << 13)
|
|
|
|
#define RX_MSDU_START_INFO1_IP_FRAG (1 << 14)
|
|
|
|
#define RX_MSDU_START_INFO1_TCP_ONLY_ACK (1 << 15)
|
|
|
|
|
2013-09-26 15:12:23 +08:00
|
|
|
/* The decapped header (rx_hdr_status) contains the following:
|
|
|
|
* a) 802.11 header
|
|
|
|
* [padding to 4 bytes]
|
|
|
|
* b) HW crypto parameter
|
|
|
|
* - 0 bytes for no security
|
|
|
|
* - 4 bytes for WEP
|
|
|
|
* - 8 bytes for TKIP, AES
|
|
|
|
* [padding to 4 bytes]
|
|
|
|
* c) A-MSDU subframe header (14 bytes) if appliable
|
|
|
|
* d) LLC/SNAP (RFC1042, 8 bytes)
|
|
|
|
*
|
|
|
|
* In case of A-MSDU only first frame in sequence contains (a) and (b). */
|
2013-06-13 01:52:10 +08:00
|
|
|
enum rx_msdu_decap_format {
|
2013-09-26 15:12:23 +08:00
|
|
|
RX_MSDU_DECAP_RAW = 0,
|
|
|
|
|
|
|
|
/* Note: QoS frames are reported as non-QoS. The rx_hdr_status in
|
|
|
|
* htt_rx_desc contains the original decapped 802.11 header. */
|
|
|
|
RX_MSDU_DECAP_NATIVE_WIFI = 1,
|
|
|
|
|
|
|
|
/* Payload contains an ethernet header (struct ethhdr). */
|
2013-06-13 01:52:10 +08:00
|
|
|
RX_MSDU_DECAP_ETHERNET2_DIX = 2,
|
2013-09-26 15:12:23 +08:00
|
|
|
|
|
|
|
/* Payload contains two 48-bit addresses and 2-byte length (14 bytes
|
|
|
|
* total), followed by an RFC1042 header (8 bytes). */
|
2013-06-13 01:52:10 +08:00
|
|
|
RX_MSDU_DECAP_8023_SNAP_LLC = 3
|
|
|
|
};
|
|
|
|
|
|
|
|
struct rx_msdu_start {
|
|
|
|
__le32 info0; /* %RX_MSDU_START_INFO0_ */
|
|
|
|
__le32 flow_id_crc;
|
|
|
|
__le32 info1; /* %RX_MSDU_START_INFO1_ */
|
|
|
|
} __packed;
|
|
|
|
|
|
|
|
/*
|
|
|
|
* msdu_length
|
|
|
|
* MSDU length in bytes after decapsulation. This field is
|
|
|
|
* still valid for MPDU frames without A-MSDU. It still
|
|
|
|
* represents MSDU length after decapsulation
|
|
|
|
*
|
|
|
|
* ip_offset
|
|
|
|
* Indicates the IP offset in bytes from the start of the
|
|
|
|
* packet after decapsulation. Only valid if ipv4_proto or
|
|
|
|
* ipv6_proto is set.
|
|
|
|
*
|
|
|
|
* ring_mask
|
|
|
|
* Indicates the destination RX rings for this MSDU.
|
|
|
|
*
|
|
|
|
* tcp_udp_offset
|
|
|
|
* Indicates the offset in bytes to the start of TCP or UDP
|
|
|
|
* header from the start of the IP header after decapsulation.
|
|
|
|
* Only valid if tcp_prot or udp_prot is set. The value 0
|
|
|
|
* indicates that the offset is longer than 127 bytes.
|
|
|
|
*
|
|
|
|
* reserved_0c
|
|
|
|
* Reserved: HW should fill with zero. FW should ignore.
|
|
|
|
*
|
|
|
|
* flow_id_crc
|
|
|
|
* The flow_id_crc runs CRC32 on the following information:
|
|
|
|
* IPv4 option: dest_addr[31:0], src_addr [31:0], {24'b0,
|
|
|
|
* protocol[7:0]}.
|
|
|
|
* IPv6 option: dest_addr[127:0], src_addr [127:0], {24'b0,
|
|
|
|
* next_header[7:0]}
|
|
|
|
* UDP case: sort_port[15:0], dest_port[15:0]
|
|
|
|
* TCP case: sort_port[15:0], dest_port[15:0],
|
|
|
|
* {header_length[3:0], 6'b0, flags[5:0], window_size[15:0]},
|
|
|
|
* {16'b0, urgent_ptr[15:0]}, all options except 32-bit
|
|
|
|
* timestamp.
|
|
|
|
*
|
|
|
|
* msdu_number
|
|
|
|
* Indicates the MSDU number within a MPDU. This value is
|
|
|
|
* reset to zero at the start of each MPDU. If the number of
|
|
|
|
* MSDU exceeds 255 this number will wrap using modulo 256.
|
|
|
|
*
|
|
|
|
* decap_format
|
|
|
|
* Indicates the format after decapsulation:
|
|
|
|
* 0: RAW: No decapsulation
|
|
|
|
* 1: Native WiFi
|
|
|
|
* 2: Ethernet 2 (DIX)
|
|
|
|
* 3: 802.3 (SNAP/LLC)
|
|
|
|
*
|
|
|
|
* ipv4_proto
|
|
|
|
* Set if L2 layer indicates IPv4 protocol.
|
|
|
|
*
|
|
|
|
* ipv6_proto
|
|
|
|
* Set if L2 layer indicates IPv6 protocol.
|
|
|
|
*
|
|
|
|
* tcp_proto
|
|
|
|
* Set if the ipv4_proto or ipv6_proto are set and the IP
|
|
|
|
* protocol indicates TCP.
|
|
|
|
*
|
|
|
|
* udp_proto
|
|
|
|
* Set if the ipv4_proto or ipv6_proto are set and the IP
|
|
|
|
* protocol indicates UDP.
|
|
|
|
*
|
|
|
|
* ip_frag
|
|
|
|
* Indicates that either the IP More frag bit is set or IP frag
|
|
|
|
* number is non-zero. If set indicates that this is a
|
|
|
|
* fragmented IP packet.
|
|
|
|
*
|
|
|
|
* tcp_only_ack
|
|
|
|
* Set if only the TCP Ack bit is set in the TCP flags and if
|
|
|
|
* the TCP payload is 0.
|
|
|
|
*
|
|
|
|
* sa_idx
|
|
|
|
* The offset in the address table which matches the MAC source
|
|
|
|
* address.
|
|
|
|
*
|
|
|
|
* reserved_2b
|
|
|
|
* Reserved: HW should fill with zero. FW should ignore.
|
|
|
|
*/
|
|
|
|
|
|
|
|
#define RX_MSDU_END_INFO0_REPORTED_MPDU_LENGTH_MASK 0x00003fff
|
|
|
|
#define RX_MSDU_END_INFO0_REPORTED_MPDU_LENGTH_LSB 0
|
|
|
|
#define RX_MSDU_END_INFO0_FIRST_MSDU (1 << 14)
|
|
|
|
#define RX_MSDU_END_INFO0_LAST_MSDU (1 << 15)
|
|
|
|
#define RX_MSDU_END_INFO0_PRE_DELIM_ERR (1 << 30)
|
|
|
|
#define RX_MSDU_END_INFO0_RESERVED_3B (1 << 31)
|
|
|
|
|
|
|
|
struct rx_msdu_end {
|
|
|
|
__le16 ip_hdr_cksum;
|
|
|
|
__le16 tcp_hdr_cksum;
|
|
|
|
u8 key_id_octet;
|
|
|
|
u8 classification_filter;
|
|
|
|
u8 wapi_pn[10];
|
|
|
|
__le32 info0;
|
|
|
|
} __packed;
|
|
|
|
|
|
|
|
/*
|
|
|
|
*ip_hdr_chksum
|
|
|
|
* This can include the IP header checksum or the pseudo header
|
|
|
|
* checksum used by TCP/UDP checksum.
|
|
|
|
*
|
|
|
|
*tcp_udp_chksum
|
|
|
|
* The value of the computed TCP/UDP checksum. A mode bit
|
|
|
|
* selects whether this checksum is the full checksum or the
|
|
|
|
* partial checksum which does not include the pseudo header.
|
|
|
|
*
|
|
|
|
*key_id_octet
|
|
|
|
* The key ID octet from the IV. Only valid when first_msdu is
|
|
|
|
* set.
|
|
|
|
*
|
|
|
|
*classification_filter
|
|
|
|
* Indicates the number classification filter rule
|
|
|
|
*
|
|
|
|
*ext_wapi_pn_63_48
|
|
|
|
* Extension PN (packet number) which is only used by WAPI.
|
|
|
|
* This corresponds to WAPI PN bits [63:48] (pn6 and pn7). The
|
|
|
|
* WAPI PN bits [63:0] are in the pn field of the rx_mpdu_start
|
|
|
|
* descriptor.
|
|
|
|
*
|
|
|
|
*ext_wapi_pn_95_64
|
|
|
|
* Extension PN (packet number) which is only used by WAPI.
|
|
|
|
* This corresponds to WAPI PN bits [95:64] (pn8, pn9, pn10 and
|
|
|
|
* pn11).
|
|
|
|
*
|
|
|
|
*ext_wapi_pn_127_96
|
|
|
|
* Extension PN (packet number) which is only used by WAPI.
|
|
|
|
* This corresponds to WAPI PN bits [127:96] (pn12, pn13, pn14,
|
|
|
|
* pn15).
|
|
|
|
*
|
|
|
|
*reported_mpdu_length
|
|
|
|
* MPDU length before decapsulation. Only valid when
|
|
|
|
* first_msdu is set. This field is taken directly from the
|
|
|
|
* length field of the A-MPDU delimiter or the preamble length
|
|
|
|
* field for non-A-MPDU frames.
|
|
|
|
*
|
|
|
|
*first_msdu
|
|
|
|
* Indicates the first MSDU of A-MSDU. If both first_msdu and
|
|
|
|
* last_msdu are set in the MSDU then this is a non-aggregated
|
|
|
|
* MSDU frame: normal MPDU. Interior MSDU in an A-MSDU shall
|
|
|
|
* have both first_mpdu and last_mpdu bits set to 0.
|
|
|
|
*
|
|
|
|
*last_msdu
|
|
|
|
* Indicates the last MSDU of the A-MSDU. MPDU end status is
|
|
|
|
* only valid when last_msdu is set.
|
|
|
|
*
|
|
|
|
*reserved_3a
|
|
|
|
* Reserved: HW should fill with zero. FW should ignore.
|
|
|
|
*
|
|
|
|
*pre_delim_err
|
|
|
|
* Indicates that the first delimiter had a FCS failure. Only
|
|
|
|
* valid when first_mpdu and first_msdu are set.
|
|
|
|
*
|
|
|
|
*reserved_3b
|
|
|
|
* Reserved: HW should fill with zero. FW should ignore.
|
|
|
|
*/
|
|
|
|
|
|
|
|
#define RX_PPDU_START_SIG_RATE_SELECT_OFDM 0
|
|
|
|
#define RX_PPDU_START_SIG_RATE_SELECT_CCK 1
|
|
|
|
|
|
|
|
#define RX_PPDU_START_SIG_RATE_OFDM_48 0
|
|
|
|
#define RX_PPDU_START_SIG_RATE_OFDM_24 1
|
|
|
|
#define RX_PPDU_START_SIG_RATE_OFDM_12 2
|
|
|
|
#define RX_PPDU_START_SIG_RATE_OFDM_6 3
|
|
|
|
#define RX_PPDU_START_SIG_RATE_OFDM_54 4
|
|
|
|
#define RX_PPDU_START_SIG_RATE_OFDM_36 5
|
|
|
|
#define RX_PPDU_START_SIG_RATE_OFDM_18 6
|
|
|
|
#define RX_PPDU_START_SIG_RATE_OFDM_9 7
|
|
|
|
|
|
|
|
#define RX_PPDU_START_SIG_RATE_CCK_LP_11 0
|
|
|
|
#define RX_PPDU_START_SIG_RATE_CCK_LP_5_5 1
|
|
|
|
#define RX_PPDU_START_SIG_RATE_CCK_LP_2 2
|
|
|
|
#define RX_PPDU_START_SIG_RATE_CCK_LP_1 3
|
|
|
|
#define RX_PPDU_START_SIG_RATE_CCK_SP_11 4
|
|
|
|
#define RX_PPDU_START_SIG_RATE_CCK_SP_5_5 5
|
|
|
|
#define RX_PPDU_START_SIG_RATE_CCK_SP_2 6
|
|
|
|
|
|
|
|
#define HTT_RX_PPDU_START_PREAMBLE_LEGACY 0x04
|
|
|
|
#define HTT_RX_PPDU_START_PREAMBLE_HT 0x08
|
|
|
|
#define HTT_RX_PPDU_START_PREAMBLE_HT_WITH_TXBF 0x09
|
|
|
|
#define HTT_RX_PPDU_START_PREAMBLE_VHT 0x0C
|
|
|
|
#define HTT_RX_PPDU_START_PREAMBLE_VHT_WITH_TXBF 0x0D
|
|
|
|
|
|
|
|
#define RX_PPDU_START_INFO0_IS_GREENFIELD (1 << 0)
|
|
|
|
|
|
|
|
#define RX_PPDU_START_INFO1_L_SIG_RATE_MASK 0x0000000f
|
|
|
|
#define RX_PPDU_START_INFO1_L_SIG_RATE_LSB 0
|
|
|
|
#define RX_PPDU_START_INFO1_L_SIG_LENGTH_MASK 0x0001ffe0
|
|
|
|
#define RX_PPDU_START_INFO1_L_SIG_LENGTH_LSB 5
|
|
|
|
#define RX_PPDU_START_INFO1_L_SIG_TAIL_MASK 0x00fc0000
|
|
|
|
#define RX_PPDU_START_INFO1_L_SIG_TAIL_LSB 18
|
|
|
|
#define RX_PPDU_START_INFO1_PREAMBLE_TYPE_MASK 0xff000000
|
|
|
|
#define RX_PPDU_START_INFO1_PREAMBLE_TYPE_LSB 24
|
|
|
|
#define RX_PPDU_START_INFO1_L_SIG_RATE_SELECT (1 << 4)
|
|
|
|
#define RX_PPDU_START_INFO1_L_SIG_PARITY (1 << 17)
|
|
|
|
|
|
|
|
#define RX_PPDU_START_INFO2_HT_SIG_VHT_SIG_A_1_MASK 0x00ffffff
|
|
|
|
#define RX_PPDU_START_INFO2_HT_SIG_VHT_SIG_A_1_LSB 0
|
|
|
|
|
|
|
|
#define RX_PPDU_START_INFO3_HT_SIG_VHT_SIG_A_2_MASK 0x00ffffff
|
|
|
|
#define RX_PPDU_START_INFO3_HT_SIG_VHT_SIG_A_2_LSB 0
|
|
|
|
#define RX_PPDU_START_INFO3_TXBF_H_INFO (1 << 24)
|
|
|
|
|
|
|
|
#define RX_PPDU_START_INFO4_VHT_SIG_B_MASK 0x1fffffff
|
|
|
|
#define RX_PPDU_START_INFO4_VHT_SIG_B_LSB 0
|
|
|
|
|
|
|
|
#define RX_PPDU_START_INFO5_SERVICE_MASK 0x0000ffff
|
|
|
|
#define RX_PPDU_START_INFO5_SERVICE_LSB 0
|
|
|
|
|
|
|
|
struct rx_ppdu_start {
|
|
|
|
struct {
|
|
|
|
u8 pri20_mhz;
|
|
|
|
u8 ext20_mhz;
|
|
|
|
u8 ext40_mhz;
|
|
|
|
u8 ext80_mhz;
|
|
|
|
} rssi_chains[4];
|
|
|
|
u8 rssi_comb;
|
|
|
|
__le16 rsvd0;
|
|
|
|
u8 info0; /* %RX_PPDU_START_INFO0_ */
|
|
|
|
__le32 info1; /* %RX_PPDU_START_INFO1_ */
|
|
|
|
__le32 info2; /* %RX_PPDU_START_INFO2_ */
|
|
|
|
__le32 info3; /* %RX_PPDU_START_INFO3_ */
|
|
|
|
__le32 info4; /* %RX_PPDU_START_INFO4_ */
|
|
|
|
__le32 info5; /* %RX_PPDU_START_INFO5_ */
|
|
|
|
} __packed;
|
|
|
|
|
|
|
|
/*
|
|
|
|
* rssi_chain0_pri20
|
|
|
|
* RSSI of RX PPDU on chain 0 of primary 20 MHz bandwidth.
|
|
|
|
* Value of 0x80 indicates invalid.
|
|
|
|
*
|
|
|
|
* rssi_chain0_sec20
|
|
|
|
* RSSI of RX PPDU on chain 0 of secondary 20 MHz bandwidth.
|
|
|
|
* Value of 0x80 indicates invalid.
|
|
|
|
*
|
|
|
|
* rssi_chain0_sec40
|
|
|
|
* RSSI of RX PPDU on chain 0 of secondary 40 MHz bandwidth.
|
|
|
|
* Value of 0x80 indicates invalid.
|
|
|
|
*
|
|
|
|
* rssi_chain0_sec80
|
|
|
|
* RSSI of RX PPDU on chain 0 of secondary 80 MHz bandwidth.
|
|
|
|
* Value of 0x80 indicates invalid.
|
|
|
|
*
|
|
|
|
* rssi_chain1_pri20
|
|
|
|
* RSSI of RX PPDU on chain 1 of primary 20 MHz bandwidth.
|
|
|
|
* Value of 0x80 indicates invalid.
|
|
|
|
*
|
|
|
|
* rssi_chain1_sec20
|
|
|
|
* RSSI of RX PPDU on chain 1 of secondary 20 MHz bandwidth.
|
|
|
|
* Value of 0x80 indicates invalid.
|
|
|
|
*
|
|
|
|
* rssi_chain1_sec40
|
|
|
|
* RSSI of RX PPDU on chain 1 of secondary 40 MHz bandwidth.
|
|
|
|
* Value of 0x80 indicates invalid.
|
|
|
|
*
|
|
|
|
* rssi_chain1_sec80
|
|
|
|
* RSSI of RX PPDU on chain 1 of secondary 80 MHz bandwidth.
|
|
|
|
* Value of 0x80 indicates invalid.
|
|
|
|
*
|
|
|
|
* rssi_chain2_pri20
|
|
|
|
* RSSI of RX PPDU on chain 2 of primary 20 MHz bandwidth.
|
|
|
|
* Value of 0x80 indicates invalid.
|
|
|
|
*
|
|
|
|
* rssi_chain2_sec20
|
|
|
|
* RSSI of RX PPDU on chain 2 of secondary 20 MHz bandwidth.
|
|
|
|
* Value of 0x80 indicates invalid.
|
|
|
|
*
|
|
|
|
* rssi_chain2_sec40
|
|
|
|
* RSSI of RX PPDU on chain 2 of secondary 40 MHz bandwidth.
|
|
|
|
* Value of 0x80 indicates invalid.
|
|
|
|
*
|
|
|
|
* rssi_chain2_sec80
|
|
|
|
* RSSI of RX PPDU on chain 2 of secondary 80 MHz bandwidth.
|
|
|
|
* Value of 0x80 indicates invalid.
|
|
|
|
*
|
|
|
|
* rssi_chain3_pri20
|
|
|
|
* RSSI of RX PPDU on chain 3 of primary 20 MHz bandwidth.
|
|
|
|
* Value of 0x80 indicates invalid.
|
|
|
|
*
|
|
|
|
* rssi_chain3_sec20
|
|
|
|
* RSSI of RX PPDU on chain 3 of secondary 20 MHz bandwidth.
|
|
|
|
* Value of 0x80 indicates invalid.
|
|
|
|
*
|
|
|
|
* rssi_chain3_sec40
|
|
|
|
* RSSI of RX PPDU on chain 3 of secondary 40 MHz bandwidth.
|
|
|
|
* Value of 0x80 indicates invalid.
|
|
|
|
*
|
|
|
|
* rssi_chain3_sec80
|
|
|
|
* RSSI of RX PPDU on chain 3 of secondary 80 MHz bandwidth.
|
|
|
|
* Value of 0x80 indicates invalid.
|
|
|
|
*
|
|
|
|
* rssi_comb
|
|
|
|
* The combined RSSI of RX PPDU of all active chains and
|
|
|
|
* bandwidths. Value of 0x80 indicates invalid.
|
|
|
|
*
|
|
|
|
* reserved_4a
|
|
|
|
* Reserved: HW should fill with 0, FW should ignore.
|
|
|
|
*
|
|
|
|
* is_greenfield
|
|
|
|
* Do we really support this?
|
|
|
|
*
|
|
|
|
* reserved_4b
|
|
|
|
* Reserved: HW should fill with 0, FW should ignore.
|
|
|
|
*
|
|
|
|
* l_sig_rate
|
|
|
|
* If l_sig_rate_select is 0:
|
|
|
|
* 0x8: OFDM 48 Mbps
|
|
|
|
* 0x9: OFDM 24 Mbps
|
|
|
|
* 0xA: OFDM 12 Mbps
|
|
|
|
* 0xB: OFDM 6 Mbps
|
|
|
|
* 0xC: OFDM 54 Mbps
|
|
|
|
* 0xD: OFDM 36 Mbps
|
|
|
|
* 0xE: OFDM 18 Mbps
|
|
|
|
* 0xF: OFDM 9 Mbps
|
|
|
|
* If l_sig_rate_select is 1:
|
|
|
|
* 0x8: CCK 11 Mbps long preamble
|
|
|
|
* 0x9: CCK 5.5 Mbps long preamble
|
|
|
|
* 0xA: CCK 2 Mbps long preamble
|
|
|
|
* 0xB: CCK 1 Mbps long preamble
|
|
|
|
* 0xC: CCK 11 Mbps short preamble
|
|
|
|
* 0xD: CCK 5.5 Mbps short preamble
|
|
|
|
* 0xE: CCK 2 Mbps short preamble
|
|
|
|
*
|
|
|
|
* l_sig_rate_select
|
|
|
|
* Legacy signal rate select. If set then l_sig_rate indicates
|
|
|
|
* CCK rates. If clear then l_sig_rate indicates OFDM rates.
|
|
|
|
*
|
|
|
|
* l_sig_length
|
|
|
|
* Length of legacy frame in octets.
|
|
|
|
*
|
|
|
|
* l_sig_parity
|
|
|
|
* Odd parity over l_sig_rate and l_sig_length
|
|
|
|
*
|
|
|
|
* l_sig_tail
|
|
|
|
* Tail bits for Viterbi decoder
|
|
|
|
*
|
|
|
|
* preamble_type
|
|
|
|
* Indicates the type of preamble ahead:
|
|
|
|
* 0x4: Legacy (OFDM/CCK)
|
|
|
|
* 0x8: HT
|
|
|
|
* 0x9: HT with TxBF
|
|
|
|
* 0xC: VHT
|
|
|
|
* 0xD: VHT with TxBF
|
|
|
|
* 0x80 - 0xFF: Reserved for special baseband data types such
|
|
|
|
* as radar and spectral scan.
|
|
|
|
*
|
|
|
|
* ht_sig_vht_sig_a_1
|
|
|
|
* If preamble_type == 0x8 or 0x9
|
|
|
|
* HT-SIG (first 24 bits)
|
|
|
|
* If preamble_type == 0xC or 0xD
|
|
|
|
* VHT-SIG A (first 24 bits)
|
|
|
|
* Else
|
|
|
|
* Reserved
|
|
|
|
*
|
|
|
|
* reserved_6
|
|
|
|
* Reserved: HW should fill with 0, FW should ignore.
|
|
|
|
*
|
|
|
|
* ht_sig_vht_sig_a_2
|
|
|
|
* If preamble_type == 0x8 or 0x9
|
|
|
|
* HT-SIG (last 24 bits)
|
|
|
|
* If preamble_type == 0xC or 0xD
|
|
|
|
* VHT-SIG A (last 24 bits)
|
|
|
|
* Else
|
|
|
|
* Reserved
|
|
|
|
*
|
|
|
|
* txbf_h_info
|
|
|
|
* Indicates that the packet data carries H information which
|
|
|
|
* is used for TxBF debug.
|
|
|
|
*
|
|
|
|
* reserved_7
|
|
|
|
* Reserved: HW should fill with 0, FW should ignore.
|
|
|
|
*
|
|
|
|
* vht_sig_b
|
|
|
|
* WiFi 1.0 and WiFi 2.0 will likely have this field to be all
|
|
|
|
* 0s since the BB does not plan on decoding VHT SIG-B.
|
|
|
|
*
|
|
|
|
* reserved_8
|
|
|
|
* Reserved: HW should fill with 0, FW should ignore.
|
|
|
|
*
|
|
|
|
* service
|
|
|
|
* Service field from BB for OFDM, HT and VHT packets. CCK
|
|
|
|
* packets will have service field of 0.
|
|
|
|
*
|
|
|
|
* reserved_9
|
|
|
|
* Reserved: HW should fill with 0, FW should ignore.
|
|
|
|
*/
|
|
|
|
|
|
|
|
|
|
|
|
#define RX_PPDU_END_FLAGS_PHY_ERR (1 << 0)
|
|
|
|
#define RX_PPDU_END_FLAGS_RX_LOCATION (1 << 1)
|
|
|
|
#define RX_PPDU_END_FLAGS_TXBF_H_INFO (1 << 2)
|
|
|
|
|
|
|
|
#define RX_PPDU_END_INFO0_RX_ANTENNA_MASK 0x00ffffff
|
|
|
|
#define RX_PPDU_END_INFO0_RX_ANTENNA_LSB 0
|
|
|
|
#define RX_PPDU_END_INFO0_FLAGS_TX_HT_VHT_ACK (1 << 24)
|
|
|
|
#define RX_PPDU_END_INFO0_BB_CAPTURED_CHANNEL (1 << 25)
|
|
|
|
|
|
|
|
#define RX_PPDU_END_INFO1_PPDU_DONE (1 << 15)
|
|
|
|
|
|
|
|
struct rx_ppdu_end {
|
|
|
|
__le32 evm_p0;
|
|
|
|
__le32 evm_p1;
|
|
|
|
__le32 evm_p2;
|
|
|
|
__le32 evm_p3;
|
|
|
|
__le32 evm_p4;
|
|
|
|
__le32 evm_p5;
|
|
|
|
__le32 evm_p6;
|
|
|
|
__le32 evm_p7;
|
|
|
|
__le32 evm_p8;
|
|
|
|
__le32 evm_p9;
|
|
|
|
__le32 evm_p10;
|
|
|
|
__le32 evm_p11;
|
|
|
|
__le32 evm_p12;
|
|
|
|
__le32 evm_p13;
|
|
|
|
__le32 evm_p14;
|
|
|
|
__le32 evm_p15;
|
|
|
|
__le32 tsf_timestamp;
|
|
|
|
__le32 wb_timestamp;
|
|
|
|
u8 locationing_timestamp;
|
|
|
|
u8 phy_err_code;
|
|
|
|
__le16 flags; /* %RX_PPDU_END_FLAGS_ */
|
|
|
|
__le32 info0; /* %RX_PPDU_END_INFO0_ */
|
|
|
|
__le16 bb_length;
|
|
|
|
__le16 info1; /* %RX_PPDU_END_INFO1_ */
|
|
|
|
} __packed;
|
|
|
|
|
|
|
|
/*
|
|
|
|
* evm_p0
|
|
|
|
* EVM for pilot 0. Contain EVM for streams: 0, 1, 2 and 3.
|
|
|
|
*
|
|
|
|
* evm_p1
|
|
|
|
* EVM for pilot 1. Contain EVM for streams: 0, 1, 2 and 3.
|
|
|
|
*
|
|
|
|
* evm_p2
|
|
|
|
* EVM for pilot 2. Contain EVM for streams: 0, 1, 2 and 3.
|
|
|
|
*
|
|
|
|
* evm_p3
|
|
|
|
* EVM for pilot 3. Contain EVM for streams: 0, 1, 2 and 3.
|
|
|
|
*
|
|
|
|
* evm_p4
|
|
|
|
* EVM for pilot 4. Contain EVM for streams: 0, 1, 2 and 3.
|
|
|
|
*
|
|
|
|
* evm_p5
|
|
|
|
* EVM for pilot 5. Contain EVM for streams: 0, 1, 2 and 3.
|
|
|
|
*
|
|
|
|
* evm_p6
|
|
|
|
* EVM for pilot 6. Contain EVM for streams: 0, 1, 2 and 3.
|
|
|
|
*
|
|
|
|
* evm_p7
|
|
|
|
* EVM for pilot 7. Contain EVM for streams: 0, 1, 2 and 3.
|
|
|
|
*
|
|
|
|
* evm_p8
|
|
|
|
* EVM for pilot 8. Contain EVM for streams: 0, 1, 2 and 3.
|
|
|
|
*
|
|
|
|
* evm_p9
|
|
|
|
* EVM for pilot 9. Contain EVM for streams: 0, 1, 2 and 3.
|
|
|
|
*
|
|
|
|
* evm_p10
|
|
|
|
* EVM for pilot 10. Contain EVM for streams: 0, 1, 2 and 3.
|
|
|
|
*
|
|
|
|
* evm_p11
|
|
|
|
* EVM for pilot 11. Contain EVM for streams: 0, 1, 2 and 3.
|
|
|
|
*
|
|
|
|
* evm_p12
|
|
|
|
* EVM for pilot 12. Contain EVM for streams: 0, 1, 2 and 3.
|
|
|
|
*
|
|
|
|
* evm_p13
|
|
|
|
* EVM for pilot 13. Contain EVM for streams: 0, 1, 2 and 3.
|
|
|
|
*
|
|
|
|
* evm_p14
|
|
|
|
* EVM for pilot 14. Contain EVM for streams: 0, 1, 2 and 3.
|
|
|
|
*
|
|
|
|
* evm_p15
|
|
|
|
* EVM for pilot 15. Contain EVM for streams: 0, 1, 2 and 3.
|
|
|
|
*
|
|
|
|
* tsf_timestamp
|
|
|
|
* Receive TSF timestamp sampled on the rising edge of
|
|
|
|
* rx_clear. For PHY errors this may be the current TSF when
|
|
|
|
* phy_error is asserted if the rx_clear does not assert before
|
|
|
|
* the end of the PHY error.
|
|
|
|
*
|
|
|
|
* wb_timestamp
|
|
|
|
* WLAN/BT timestamp is a 1 usec resolution timestamp which
|
|
|
|
* does not get updated based on receive beacon like TSF. The
|
|
|
|
* same rules for capturing tsf_timestamp are used to capture
|
|
|
|
* the wb_timestamp.
|
|
|
|
*
|
|
|
|
* locationing_timestamp
|
|
|
|
* Timestamp used for locationing. This timestamp is used to
|
|
|
|
* indicate fractions of usec. For example if the MAC clock is
|
|
|
|
* running at 80 MHz, the timestamp will increment every 12.5
|
|
|
|
* nsec. The value starts at 0 and increments to 79 and
|
|
|
|
* returns to 0 and repeats. This information is valid for
|
|
|
|
* every PPDU. This information can be used in conjunction
|
|
|
|
* with wb_timestamp to capture large delta times.
|
|
|
|
*
|
|
|
|
* phy_err_code
|
|
|
|
* See the 1.10.8.1.2 for the list of the PHY error codes.
|
|
|
|
*
|
|
|
|
* phy_err
|
|
|
|
* Indicates a PHY error was detected for this PPDU.
|
|
|
|
*
|
|
|
|
* rx_location
|
|
|
|
* Indicates that location information was requested.
|
|
|
|
*
|
|
|
|
* txbf_h_info
|
|
|
|
* Indicates that the packet data carries H information which
|
|
|
|
* is used for TxBF debug.
|
|
|
|
*
|
|
|
|
* reserved_18
|
|
|
|
* Reserved: HW should fill with 0, FW should ignore.
|
|
|
|
*
|
|
|
|
* rx_antenna
|
|
|
|
* Receive antenna value
|
|
|
|
*
|
|
|
|
* tx_ht_vht_ack
|
|
|
|
* Indicates that a HT or VHT Ack/BA frame was transmitted in
|
|
|
|
* response to this receive packet.
|
|
|
|
*
|
|
|
|
* bb_captured_channel
|
|
|
|
* Indicates that the BB has captured a channel dump. FW can
|
|
|
|
* then read the channel dump memory. This may indicate that
|
|
|
|
* the channel was captured either based on PCU setting the
|
|
|
|
* capture_channel bit BB descriptor or FW setting the
|
|
|
|
* capture_channel mode bit.
|
|
|
|
*
|
|
|
|
* reserved_19
|
|
|
|
* Reserved: HW should fill with 0, FW should ignore.
|
|
|
|
*
|
|
|
|
* bb_length
|
|
|
|
* Indicates the number of bytes of baseband information for
|
|
|
|
* PPDUs where the BB descriptor preamble type is 0x80 to 0xFF
|
|
|
|
* which indicates that this is not a normal PPDU but rather
|
|
|
|
* contains baseband debug information.
|
|
|
|
*
|
|
|
|
* reserved_20
|
|
|
|
* Reserved: HW should fill with 0, FW should ignore.
|
|
|
|
*
|
|
|
|
* ppdu_done
|
|
|
|
* PPDU end status is only valid when ppdu_done bit is set.
|
|
|
|
* Every time HW sets this bit in memory FW/SW must clear this
|
|
|
|
* bit in memory. FW will initialize all the ppdu_done dword
|
|
|
|
* to 0.
|
|
|
|
*/
|
|
|
|
|
|
|
|
#define FW_RX_DESC_INFO0_DISCARD (1 << 0)
|
|
|
|
#define FW_RX_DESC_INFO0_FORWARD (1 << 1)
|
|
|
|
#define FW_RX_DESC_INFO0_INSPECT (1 << 5)
|
|
|
|
#define FW_RX_DESC_INFO0_EXT_MASK 0xC0
|
|
|
|
#define FW_RX_DESC_INFO0_EXT_LSB 6
|
|
|
|
|
|
|
|
struct fw_rx_desc_base {
|
|
|
|
u8 info0;
|
|
|
|
} __packed;
|
|
|
|
|
|
|
|
#endif /* _RX_DESC_H_ */
|