OpenCloudOS-Kernel/arch/x86/kernel/vm86_32.c

833 lines
22 KiB
C
Raw Normal View History

License cleanup: add SPDX GPL-2.0 license identifier to files with no license Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-01 22:07:57 +08:00
// SPDX-License-Identifier: GPL-2.0
/*
* Copyright (C) 1994 Linus Torvalds
*
* 29 dec 2001 - Fixed oopses caused by unchecked access to the vm86
* stack - Manfred Spraul <manfred@colorfullife.com>
*
* 22 mar 2002 - Manfred detected the stackfaults, but didn't handle
* them correctly. Now the emulation will be in a
* consistent state after stackfaults - Kasper Dupont
* <kasperd@daimi.au.dk>
*
* 22 mar 2002 - Added missing clear_IF in set_vflags_* Kasper Dupont
* <kasperd@daimi.au.dk>
*
* ?? ??? 2002 - Fixed premature returns from handle_vm86_fault
* caused by Kasper Dupont's changes - Stas Sergeev
*
* 4 apr 2002 - Fixed CHECK_IF_IN_TRAP broken by Stas' changes.
* Kasper Dupont <kasperd@daimi.au.dk>
*
* 9 apr 2002 - Changed syntax of macros in handle_vm86_fault.
* Kasper Dupont <kasperd@daimi.au.dk>
*
* 9 apr 2002 - Changed stack access macros to jump to a label
* instead of returning to userspace. This simplifies
* do_int, and is needed by handle_vm6_fault. Kasper
* Dupont <kasperd@daimi.au.dk>
*
*/
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
#include <linux/capability.h>
#include <linux/errno.h>
#include <linux/interrupt.h>
#include <linux/syscalls.h>
#include <linux/sched.h>
#include <linux/sched/task_stack.h>
#include <linux/kernel.h>
#include <linux/signal.h>
#include <linux/string.h>
#include <linux/mm.h>
#include <linux/smp.h>
#include <linux/highmem.h>
#include <linux/ptrace.h>
[PATCH] make vm86 call audit_syscall_exit hi, The motivation behind the patch below was to address messages in /var/log/messages such as: Jan 31 10:54:15 mets kernel: audit(:0): major=252 name_count=0: freeing multiple contexts (1) Jan 31 10:54:15 mets kernel: audit(:0): major=113 name_count=0: freeing multiple contexts (2) I can reproduce by running 'get-edid' from: http://john.fremlin.de/programs/linux/read-edid/. These messages come about in the log b/c the vm86 calls do not exit via the normal system call exit paths and thus do not call 'audit_syscall_exit'. The next system call will then free the context for itself and for the vm86 context, thus generating the above messages. This patch addresses the issue by simply adding a call to 'audit_syscall_exit' from the vm86 code. Besides fixing the above error messages the patch also now allows vm86 system calls to become auditable. This is useful since strace does not appear to properly record the return values from sys_vm86. I think this patch is also a step in the right direction in terms of cleaning up some core auditing code. If we can correct any other paths that do not properly call the audit exit and entries points, then we can also eliminate the notion of context chaining. I've tested this patch by verifying that the log messages no longer appear, and that the audit records for sys_vm86 appear to be correct. Also, 'read_edid' produces itentical output. thanks, -Jason Signed-off-by: Jason Baron <jbaron@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2006-02-01 05:56:28 +08:00
#include <linux/audit.h>
#include <linux/stddef.h>
#include <linux/slab.h>
#include <linux/security.h>
#include <linux/uaccess.h>
#include <asm/io.h>
#include <asm/tlbflush.h>
#include <asm/irq.h>
#include <asm/traps.h>
#include <asm/vm86.h>
#include <asm/switch_to.h>
/*
* Known problems:
*
* Interrupt handling is not guaranteed:
* - a real x86 will disable all interrupts for one instruction
* after a "mov ss,xx" to make stack handling atomic even without
* the 'lss' instruction. We can't guarantee this in v86 mode,
* as the next instruction might result in a page fault or similar.
* - a real x86 will have interrupts disabled for one instruction
* past the 'sti' that enables them. We don't bother with all the
* details yet.
*
* Let's hope these problems do not actually matter for anything.
*/
/*
* 8- and 16-bit register defines..
*/
#define AL(regs) (((unsigned char *)&((regs)->pt.ax))[0])
#define AH(regs) (((unsigned char *)&((regs)->pt.ax))[1])
#define IP(regs) (*(unsigned short *)&((regs)->pt.ip))
#define SP(regs) (*(unsigned short *)&((regs)->pt.sp))
/*
* virtual flags (16 and 32-bit versions)
*/
#define VFLAGS (*(unsigned short *)&(current->thread.vm86->veflags))
#define VEFLAGS (current->thread.vm86->veflags)
#define set_flags(X, new, mask) \
((X) = ((X) & ~(mask)) | ((new) & (mask)))
#define SAFE_MASK (0xDD5)
#define RETURN_MASK (0xDFF)
void save_v86_state(struct kernel_vm86_regs *regs, int retval)
{
struct task_struct *tsk = current;
struct vm86plus_struct __user *user;
struct vm86 *vm86 = current->thread.vm86;
/*
* This gets called from entry.S with interrupts disabled, but
* from process context. Enable interrupts here, before trying
* to access user space.
*/
local_irq_enable();
if (!vm86 || !vm86->user_vm86) {
pr_alert("no user_vm86: BAD\n");
do_exit(SIGSEGV);
}
set_flags(regs->pt.flags, VEFLAGS, X86_EFLAGS_VIF | vm86->veflags_mask);
user = vm86->user_vm86;
if (!user_access_begin(user, vm86->vm86plus.is_vm86pus ?
sizeof(struct vm86plus_struct) :
sizeof(struct vm86_struct)))
goto Efault;
unsafe_put_user(regs->pt.bx, &user->regs.ebx, Efault_end);
unsafe_put_user(regs->pt.cx, &user->regs.ecx, Efault_end);
unsafe_put_user(regs->pt.dx, &user->regs.edx, Efault_end);
unsafe_put_user(regs->pt.si, &user->regs.esi, Efault_end);
unsafe_put_user(regs->pt.di, &user->regs.edi, Efault_end);
unsafe_put_user(regs->pt.bp, &user->regs.ebp, Efault_end);
unsafe_put_user(regs->pt.ax, &user->regs.eax, Efault_end);
unsafe_put_user(regs->pt.ip, &user->regs.eip, Efault_end);
unsafe_put_user(regs->pt.cs, &user->regs.cs, Efault_end);
unsafe_put_user(regs->pt.flags, &user->regs.eflags, Efault_end);
unsafe_put_user(regs->pt.sp, &user->regs.esp, Efault_end);
unsafe_put_user(regs->pt.ss, &user->regs.ss, Efault_end);
unsafe_put_user(regs->es, &user->regs.es, Efault_end);
unsafe_put_user(regs->ds, &user->regs.ds, Efault_end);
unsafe_put_user(regs->fs, &user->regs.fs, Efault_end);
unsafe_put_user(regs->gs, &user->regs.gs, Efault_end);
/*
* Don't write screen_bitmap in case some user had a value there
* and expected it to remain unchanged.
*/
user_access_end();
preempt_disable();
tsk->thread.sp0 = vm86->saved_sp0;
tsk->thread.sysenter_cs = __KERNEL_CS;
update_task_stack(tsk);
refresh_sysenter_cs(&tsk->thread);
vm86->saved_sp0 = 0;
preempt_enable();
memcpy(&regs->pt, &vm86->regs32, sizeof(struct pt_regs));
lazy_load_gs(vm86->regs32.gs);
regs->pt.ax = retval;
return;
Efault_end:
user_access_end();
Efault:
pr_alert("could not access userspace vm86 info\n");
do_exit(SIGSEGV);
}
static int do_vm86_irq_handling(int subfunction, int irqnumber);
static long do_sys_vm86(struct vm86plus_struct __user *user_vm86, bool plus);
SYSCALL_DEFINE1(vm86old, struct vm86_struct __user *, user_vm86)
{
return do_sys_vm86((struct vm86plus_struct __user *) user_vm86, false);
}
SYSCALL_DEFINE2(vm86, unsigned long, cmd, unsigned long, arg)
{
switch (cmd) {
case VM86_REQUEST_IRQ:
case VM86_FREE_IRQ:
case VM86_GET_IRQ_BITS:
case VM86_GET_AND_RESET_IRQ:
return do_vm86_irq_handling(cmd, (int)arg);
case VM86_PLUS_INSTALL_CHECK:
/*
* NOTE: on old vm86 stuff this will return the error
* from access_ok(), because the subfunction is
* interpreted as (invalid) address to vm86_struct.
* So the installation check works.
*/
return 0;
}
/* we come here only for functions VM86_ENTER, VM86_ENTER_NO_BYPASS */
return do_sys_vm86((struct vm86plus_struct __user *) arg, true);
}
static long do_sys_vm86(struct vm86plus_struct __user *user_vm86, bool plus)
{
struct task_struct *tsk = current;
struct vm86 *vm86 = tsk->thread.vm86;
struct kernel_vm86_regs vm86regs;
struct pt_regs *regs = current_pt_regs();
unsigned long err = 0;
struct vm86_struct v;
err = security_mmap_addr(0);
if (err) {
/*
* vm86 cannot virtualize the address space, so vm86 users
* need to manage the low 1MB themselves using mmap. Given
* that BIOS places important data in the first page, vm86
* is essentially useless if mmap_min_addr != 0. DOSEMU,
* for example, won't even bother trying to use vm86 if it
* can't map a page at virtual address 0.
*
* To reduce the available kernel attack surface, simply
* disallow vm86(old) for users who cannot mmap at va 0.
*
* The implementation of security_mmap_addr will allow
* suitably privileged users to map va 0 even if
* vm.mmap_min_addr is set above 0, and we want this
* behavior for vm86 as well, as it ensures that legacy
* tools like vbetool will not fail just because of
* vm.mmap_min_addr.
*/
pr_info_once("Denied a call to vm86(old) from %s[%d] (uid: %d). Set the vm.mmap_min_addr sysctl to 0 and/or adjust LSM mmap_min_addr policy to enable vm86 if you are using a vm86-based DOS emulator.\n",
current->comm, task_pid_nr(current),
from_kuid_munged(&init_user_ns, current_uid()));
return -EPERM;
}
if (!vm86) {
if (!(vm86 = kzalloc(sizeof(*vm86), GFP_KERNEL)))
return -ENOMEM;
tsk->thread.vm86 = vm86;
}
if (vm86->saved_sp0)
return -EPERM;
if (copy_from_user(&v, user_vm86,
offsetof(struct vm86_struct, int_revectored)))
return -EFAULT;
/* VM86_SCREEN_BITMAP had numerous bugs and appears to have no users. */
if (v.flags & VM86_SCREEN_BITMAP) {
char comm[TASK_COMM_LEN];
pr_info_once("vm86: '%s' uses VM86_SCREEN_BITMAP, which is no longer supported\n", get_task_comm(comm, current));
return -EINVAL;
}
memset(&vm86regs, 0, sizeof(vm86regs));
vm86regs.pt.bx = v.regs.ebx;
vm86regs.pt.cx = v.regs.ecx;
vm86regs.pt.dx = v.regs.edx;
vm86regs.pt.si = v.regs.esi;
vm86regs.pt.di = v.regs.edi;
vm86regs.pt.bp = v.regs.ebp;
vm86regs.pt.ax = v.regs.eax;
vm86regs.pt.ip = v.regs.eip;
vm86regs.pt.cs = v.regs.cs;
vm86regs.pt.flags = v.regs.eflags;
vm86regs.pt.sp = v.regs.esp;
vm86regs.pt.ss = v.regs.ss;
vm86regs.es = v.regs.es;
vm86regs.ds = v.regs.ds;
vm86regs.fs = v.regs.fs;
vm86regs.gs = v.regs.gs;
vm86->flags = v.flags;
vm86->cpu_type = v.cpu_type;
if (copy_from_user(&vm86->int_revectored,
&user_vm86->int_revectored,
sizeof(struct revectored_struct)))
return -EFAULT;
if (copy_from_user(&vm86->int21_revectored,
&user_vm86->int21_revectored,
sizeof(struct revectored_struct)))
return -EFAULT;
if (plus) {
if (copy_from_user(&vm86->vm86plus, &user_vm86->vm86plus,
sizeof(struct vm86plus_info_struct)))
return -EFAULT;
vm86->vm86plus.is_vm86pus = 1;
} else
memset(&vm86->vm86plus, 0,
sizeof(struct vm86plus_info_struct));
memcpy(&vm86->regs32, regs, sizeof(struct pt_regs));
vm86->user_vm86 = user_vm86;
/*
* The flags register is also special: we cannot trust that the user
* has set it up safely, so this makes sure interrupt etc flags are
* inherited from protected mode.
*/
VEFLAGS = vm86regs.pt.flags;
vm86regs.pt.flags &= SAFE_MASK;
vm86regs.pt.flags |= regs->flags & ~SAFE_MASK;
vm86regs.pt.flags |= X86_VM_MASK;
vm86regs.pt.orig_ax = regs->orig_ax;
switch (vm86->cpu_type) {
case CPU_286:
vm86->veflags_mask = 0;
break;
case CPU_386:
vm86->veflags_mask = X86_EFLAGS_NT | X86_EFLAGS_IOPL;
break;
case CPU_486:
vm86->veflags_mask = X86_EFLAGS_AC | X86_EFLAGS_NT | X86_EFLAGS_IOPL;
break;
default:
vm86->veflags_mask = X86_EFLAGS_ID | X86_EFLAGS_AC | X86_EFLAGS_NT | X86_EFLAGS_IOPL;
break;
}
/*
* Save old state
*/
vm86->saved_sp0 = tsk->thread.sp0;
lazy_save_gs(vm86->regs32.gs);
/* make room for real-mode segments */
preempt_disable();
tsk->thread.sp0 += 16;
if (boot_cpu_has(X86_FEATURE_SEP)) {
tsk->thread.sysenter_cs = 0;
refresh_sysenter_cs(&tsk->thread);
}
update_task_stack(tsk);
preempt_enable();
memcpy((struct kernel_vm86_regs *)regs, &vm86regs, sizeof(vm86regs));
return regs->ax;
}
static inline void set_IF(struct kernel_vm86_regs *regs)
{
VEFLAGS |= X86_EFLAGS_VIF;
}
static inline void clear_IF(struct kernel_vm86_regs *regs)
{
VEFLAGS &= ~X86_EFLAGS_VIF;
}
static inline void clear_TF(struct kernel_vm86_regs *regs)
{
regs->pt.flags &= ~X86_EFLAGS_TF;
}
static inline void clear_AC(struct kernel_vm86_regs *regs)
{
regs->pt.flags &= ~X86_EFLAGS_AC;
}
/*
* It is correct to call set_IF(regs) from the set_vflags_*
* functions. However someone forgot to call clear_IF(regs)
* in the opposite case.
* After the command sequence CLI PUSHF STI POPF you should
* end up with interrupts disabled, but you ended up with
* interrupts enabled.
* ( I was testing my own changes, but the only bug I
* could find was in a function I had not changed. )
* [KD]
*/
static inline void set_vflags_long(unsigned long flags, struct kernel_vm86_regs *regs)
{
set_flags(VEFLAGS, flags, current->thread.vm86->veflags_mask);
set_flags(regs->pt.flags, flags, SAFE_MASK);
if (flags & X86_EFLAGS_IF)
set_IF(regs);
else
clear_IF(regs);
}
static inline void set_vflags_short(unsigned short flags, struct kernel_vm86_regs *regs)
{
set_flags(VFLAGS, flags, current->thread.vm86->veflags_mask);
set_flags(regs->pt.flags, flags, SAFE_MASK);
if (flags & X86_EFLAGS_IF)
set_IF(regs);
else
clear_IF(regs);
}
static inline unsigned long get_vflags(struct kernel_vm86_regs *regs)
{
unsigned long flags = regs->pt.flags & RETURN_MASK;
if (VEFLAGS & X86_EFLAGS_VIF)
flags |= X86_EFLAGS_IF;
flags |= X86_EFLAGS_IOPL;
return flags | (VEFLAGS & current->thread.vm86->veflags_mask);
}
static inline int is_revectored(int nr, struct revectored_struct *bitmap)
{
return test_bit(nr, bitmap->__map);
}
#define val_byte(val, n) (((__u8 *)&val)[n])
#define pushb(base, ptr, val, err_label) \
do { \
__u8 __val = val; \
ptr--; \
if (put_user(__val, base + ptr) < 0) \
goto err_label; \
} while (0)
#define pushw(base, ptr, val, err_label) \
do { \
__u16 __val = val; \
ptr--; \
if (put_user(val_byte(__val, 1), base + ptr) < 0) \
goto err_label; \
ptr--; \
if (put_user(val_byte(__val, 0), base + ptr) < 0) \
goto err_label; \
} while (0)
#define pushl(base, ptr, val, err_label) \
do { \
__u32 __val = val; \
ptr--; \
if (put_user(val_byte(__val, 3), base + ptr) < 0) \
goto err_label; \
ptr--; \
if (put_user(val_byte(__val, 2), base + ptr) < 0) \
goto err_label; \
ptr--; \
if (put_user(val_byte(__val, 1), base + ptr) < 0) \
goto err_label; \
ptr--; \
if (put_user(val_byte(__val, 0), base + ptr) < 0) \
goto err_label; \
} while (0)
#define popb(base, ptr, err_label) \
({ \
__u8 __res; \
if (get_user(__res, base + ptr) < 0) \
goto err_label; \
ptr++; \
__res; \
})
#define popw(base, ptr, err_label) \
({ \
__u16 __res; \
if (get_user(val_byte(__res, 0), base + ptr) < 0) \
goto err_label; \
ptr++; \
if (get_user(val_byte(__res, 1), base + ptr) < 0) \
goto err_label; \
ptr++; \
__res; \
})
#define popl(base, ptr, err_label) \
({ \
__u32 __res; \
if (get_user(val_byte(__res, 0), base + ptr) < 0) \
goto err_label; \
ptr++; \
if (get_user(val_byte(__res, 1), base + ptr) < 0) \
goto err_label; \
ptr++; \
if (get_user(val_byte(__res, 2), base + ptr) < 0) \
goto err_label; \
ptr++; \
if (get_user(val_byte(__res, 3), base + ptr) < 0) \
goto err_label; \
ptr++; \
__res; \
})
/* There are so many possible reasons for this function to return
* VM86_INTx, so adding another doesn't bother me. We can expect
* userspace programs to be able to handle it. (Getting a problem
* in userspace is always better than an Oops anyway.) [KD]
*/
static void do_int(struct kernel_vm86_regs *regs, int i,
unsigned char __user *ssp, unsigned short sp)
{
unsigned long __user *intr_ptr;
unsigned long segoffs;
struct vm86 *vm86 = current->thread.vm86;
if (regs->pt.cs == BIOSSEG)
goto cannot_handle;
if (is_revectored(i, &vm86->int_revectored))
goto cannot_handle;
if (i == 0x21 && is_revectored(AH(regs), &vm86->int21_revectored))
goto cannot_handle;
intr_ptr = (unsigned long __user *) (i << 2);
if (get_user(segoffs, intr_ptr))
goto cannot_handle;
if ((segoffs >> 16) == BIOSSEG)
goto cannot_handle;
pushw(ssp, sp, get_vflags(regs), cannot_handle);
pushw(ssp, sp, regs->pt.cs, cannot_handle);
pushw(ssp, sp, IP(regs), cannot_handle);
regs->pt.cs = segoffs >> 16;
SP(regs) -= 6;
IP(regs) = segoffs & 0xffff;
clear_TF(regs);
clear_IF(regs);
clear_AC(regs);
return;
cannot_handle:
save_v86_state(regs, VM86_INTx + (i << 8));
}
int handle_vm86_trap(struct kernel_vm86_regs *regs, long error_code, int trapno)
{
struct vm86 *vm86 = current->thread.vm86;
if (vm86->vm86plus.is_vm86pus) {
x86, vm86: Fix preemption bug for int1 debug and int3 breakpoint handlers. Impact: fix kernel bug such as: BUG: scheduling while atomic: dosemu.bin/19680/0x00000004 See also Ubuntu bug 455067 at https://bugs.launchpad.net/ubuntu/+source/linux/+bug/455067 Commits 4915a35e35a037254550a2ba9f367a812bc37d40 ("Use preempt_conditional_sti/cli in do_int3, like on x86_64.") and 3d2a71a596bd9c761c8487a2178e95f8a61da083 ("x86, traps: converge do_debug handlers") started disabling preemption in int1 and int3 handlers on i386. The problem with vm86 is that the call to handle_vm86_trap() may jump straight to entry_32.S and never returns so preempt is never enabled again, and there is an imbalance in the preempt count. Commit be716615fe596ee117292dc615e95f707fb67fd1 ("x86, vm86: fix preemption bug"), which was later (accidentally?) reverted by commit 08d68323d1f0c34452e614263b212ca556dae47f ("hw-breakpoints: modifying generic debug exception to use thread-specific debug registers") fixed the problem for debug exceptions but not for breakpoints. There are three solutions to this problem. 1. Reenable preemption before calling handle_vm86_trap(). This was the approach that was later reverted. 2. Do not disable preemption for i386 in breakpoint and debug handlers. This was the situation before October 2008. As far as I understand preemption only needs to be disabled on x86_64 because a seperate stack is used, but it's nice to have things work the same way on i386 and x86_64. 3. Let handle_vm86_trap() return instead of jumping to assembly code. By setting a flag in _TIF_WORK_MASK, either TIF_IRET or TIF_NOTIFY_RESUME, the code in entry_32.S is instructed to return to 32 bit mode from V86 mode. The logic in entry_32.S was already present to handle signals. (I chose TIF_IRET because it's slightly more efficient in do_notify_resume() in signal.c, but in fact TIF_IRET can probably be replaced by TIF_NOTIFY_RESUME everywhere.) I'm submitting approach 3, because I believe it is the most elegant and prevents future confusion. Still, an obvious preempt_conditional_cli(regs); is necessary in traps.c to correct the bug. [ hpa: This is technically a regression, but because: 1. the regression is so old, 2. the patch seems relatively high risk, justifying more testing, and 3. we're late in the 2.6.36-rc cycle, I'm queuing it up for the 2.6.37 merge window. It might, however, justify as a -stable backport at a latter time, hence Cc: stable. ] Signed-off-by: Bart Oldeman <bartoldeman@users.sourceforge.net> LKML-Reference: <alpine.DEB.2.00.1009231312330.4732@localhost.localdomain> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: K.Prasad <prasad@linux.vnet.ibm.com> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Alexander van Heukelum <heukelum@fastmail.fm> Cc: <stable@kernel.org> Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2010-09-24 01:16:58 +08:00
if ((trapno == 3) || (trapno == 1)) {
save_v86_state(regs, VM86_TRAP + (trapno << 8));
x86, vm86: Fix preemption bug for int1 debug and int3 breakpoint handlers. Impact: fix kernel bug such as: BUG: scheduling while atomic: dosemu.bin/19680/0x00000004 See also Ubuntu bug 455067 at https://bugs.launchpad.net/ubuntu/+source/linux/+bug/455067 Commits 4915a35e35a037254550a2ba9f367a812bc37d40 ("Use preempt_conditional_sti/cli in do_int3, like on x86_64.") and 3d2a71a596bd9c761c8487a2178e95f8a61da083 ("x86, traps: converge do_debug handlers") started disabling preemption in int1 and int3 handlers on i386. The problem with vm86 is that the call to handle_vm86_trap() may jump straight to entry_32.S and never returns so preempt is never enabled again, and there is an imbalance in the preempt count. Commit be716615fe596ee117292dc615e95f707fb67fd1 ("x86, vm86: fix preemption bug"), which was later (accidentally?) reverted by commit 08d68323d1f0c34452e614263b212ca556dae47f ("hw-breakpoints: modifying generic debug exception to use thread-specific debug registers") fixed the problem for debug exceptions but not for breakpoints. There are three solutions to this problem. 1. Reenable preemption before calling handle_vm86_trap(). This was the approach that was later reverted. 2. Do not disable preemption for i386 in breakpoint and debug handlers. This was the situation before October 2008. As far as I understand preemption only needs to be disabled on x86_64 because a seperate stack is used, but it's nice to have things work the same way on i386 and x86_64. 3. Let handle_vm86_trap() return instead of jumping to assembly code. By setting a flag in _TIF_WORK_MASK, either TIF_IRET or TIF_NOTIFY_RESUME, the code in entry_32.S is instructed to return to 32 bit mode from V86 mode. The logic in entry_32.S was already present to handle signals. (I chose TIF_IRET because it's slightly more efficient in do_notify_resume() in signal.c, but in fact TIF_IRET can probably be replaced by TIF_NOTIFY_RESUME everywhere.) I'm submitting approach 3, because I believe it is the most elegant and prevents future confusion. Still, an obvious preempt_conditional_cli(regs); is necessary in traps.c to correct the bug. [ hpa: This is technically a regression, but because: 1. the regression is so old, 2. the patch seems relatively high risk, justifying more testing, and 3. we're late in the 2.6.36-rc cycle, I'm queuing it up for the 2.6.37 merge window. It might, however, justify as a -stable backport at a latter time, hence Cc: stable. ] Signed-off-by: Bart Oldeman <bartoldeman@users.sourceforge.net> LKML-Reference: <alpine.DEB.2.00.1009231312330.4732@localhost.localdomain> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: K.Prasad <prasad@linux.vnet.ibm.com> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Alexander van Heukelum <heukelum@fastmail.fm> Cc: <stable@kernel.org> Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2010-09-24 01:16:58 +08:00
return 0;
}
do_int(regs, trapno, (unsigned char __user *) (regs->pt.ss << 4), SP(regs));
return 0;
}
if (trapno != 1)
return 1; /* we let this handle by the calling routine */
current->thread.trap_nr = trapno;
current->thread.error_code = error_code;
force_sig(SIGTRAP);
return 0;
}
void handle_vm86_fault(struct kernel_vm86_regs *regs, long error_code)
{
unsigned char opcode;
unsigned char __user *csp;
unsigned char __user *ssp;
unsigned short ip, sp, orig_flags;
int data32, pref_done;
struct vm86plus_info_struct *vmpi = &current->thread.vm86->vm86plus;
#define CHECK_IF_IN_TRAP \
if (vmpi->vm86dbg_active && vmpi->vm86dbg_TFpendig) \
newflags |= X86_EFLAGS_TF
orig_flags = *(unsigned short *)&regs->pt.flags;
csp = (unsigned char __user *) (regs->pt.cs << 4);
ssp = (unsigned char __user *) (regs->pt.ss << 4);
sp = SP(regs);
ip = IP(regs);
data32 = 0;
pref_done = 0;
do {
switch (opcode = popb(csp, ip, simulate_sigsegv)) {
case 0x66: /* 32-bit data */ data32 = 1; break;
case 0x67: /* 32-bit address */ break;
case 0x2e: /* CS */ break;
case 0x3e: /* DS */ break;
case 0x26: /* ES */ break;
case 0x36: /* SS */ break;
case 0x65: /* GS */ break;
case 0x64: /* FS */ break;
case 0xf2: /* repnz */ break;
case 0xf3: /* rep */ break;
default: pref_done = 1;
}
} while (!pref_done);
switch (opcode) {
/* pushf */
case 0x9c:
if (data32) {
pushl(ssp, sp, get_vflags(regs), simulate_sigsegv);
SP(regs) -= 4;
} else {
pushw(ssp, sp, get_vflags(regs), simulate_sigsegv);
SP(regs) -= 2;
}
IP(regs) = ip;
goto vm86_fault_return;
/* popf */
case 0x9d:
{
unsigned long newflags;
if (data32) {
newflags = popl(ssp, sp, simulate_sigsegv);
SP(regs) += 4;
} else {
newflags = popw(ssp, sp, simulate_sigsegv);
SP(regs) += 2;
}
IP(regs) = ip;
CHECK_IF_IN_TRAP;
if (data32)
set_vflags_long(newflags, regs);
else
set_vflags_short(newflags, regs);
goto check_vip;
}
/* int xx */
case 0xcd: {
int intno = popb(csp, ip, simulate_sigsegv);
IP(regs) = ip;
if (vmpi->vm86dbg_active) {
if ((1 << (intno & 7)) & vmpi->vm86dbg_intxxtab[intno >> 3]) {
save_v86_state(regs, VM86_INTx + (intno << 8));
return;
}
}
do_int(regs, intno, ssp, sp);
return;
}
/* iret */
case 0xcf:
{
unsigned long newip;
unsigned long newcs;
unsigned long newflags;
if (data32) {
newip = popl(ssp, sp, simulate_sigsegv);
newcs = popl(ssp, sp, simulate_sigsegv);
newflags = popl(ssp, sp, simulate_sigsegv);
SP(regs) += 12;
} else {
newip = popw(ssp, sp, simulate_sigsegv);
newcs = popw(ssp, sp, simulate_sigsegv);
newflags = popw(ssp, sp, simulate_sigsegv);
SP(regs) += 6;
}
IP(regs) = newip;
regs->pt.cs = newcs;
CHECK_IF_IN_TRAP;
if (data32) {
set_vflags_long(newflags, regs);
} else {
set_vflags_short(newflags, regs);
}
goto check_vip;
}
/* cli */
case 0xfa:
IP(regs) = ip;
clear_IF(regs);
goto vm86_fault_return;
/* sti */
/*
* Damn. This is incorrect: the 'sti' instruction should actually
* enable interrupts after the /next/ instruction. Not good.
*
* Probably needs some horsing around with the TF flag. Aiee..
*/
case 0xfb:
IP(regs) = ip;
set_IF(regs);
goto check_vip;
default:
save_v86_state(regs, VM86_UNKNOWN);
}
return;
check_vip:
if ((VEFLAGS & (X86_EFLAGS_VIP | X86_EFLAGS_VIF)) ==
(X86_EFLAGS_VIP | X86_EFLAGS_VIF)) {
save_v86_state(regs, VM86_STI);
return;
}
vm86_fault_return:
if (vmpi->force_return_for_pic && (VEFLAGS & (X86_EFLAGS_IF | X86_EFLAGS_VIF))) {
save_v86_state(regs, VM86_PICRETURN);
return;
}
if (orig_flags & X86_EFLAGS_TF)
handle_vm86_trap(regs, 0, X86_TRAP_DB);
return;
simulate_sigsegv:
/* FIXME: After a long discussion with Stas we finally
* agreed, that this is wrong. Here we should
* really send a SIGSEGV to the user program.
* But how do we create the correct context? We
* are inside a general protection fault handler
* and has just returned from a page fault handler.
* The correct context for the signal handler
* should be a mixture of the two, but how do we
* get the information? [KD]
*/
save_v86_state(regs, VM86_UNKNOWN);
}
/* ---------------- vm86 special IRQ passing stuff ----------------- */
#define VM86_IRQNAME "vm86irq"
static struct vm86_irqs {
struct task_struct *tsk;
int sig;
} vm86_irqs[16];
static DEFINE_SPINLOCK(irqbits_lock);
static int irqbits;
#define ALLOWED_SIGS (1 /* 0 = don't send a signal */ \
| (1 << SIGUSR1) | (1 << SIGUSR2) | (1 << SIGIO) | (1 << SIGURG) \
| (1 << SIGUNUSED))
IRQ: Maintain regs pointer globally rather than passing to IRQ handlers Maintain a per-CPU global "struct pt_regs *" variable which can be used instead of passing regs around manually through all ~1800 interrupt handlers in the Linux kernel. The regs pointer is used in few places, but it potentially costs both stack space and code to pass it around. On the FRV arch, removing the regs parameter from all the genirq function results in a 20% speed up of the IRQ exit path (ie: from leaving timer_interrupt() to leaving do_IRQ()). Where appropriate, an arch may override the generic storage facility and do something different with the variable. On FRV, for instance, the address is maintained in GR28 at all times inside the kernel as part of general exception handling. Having looked over the code, it appears that the parameter may be handed down through up to twenty or so layers of functions. Consider a USB character device attached to a USB hub, attached to a USB controller that posts its interrupts through a cascaded auxiliary interrupt controller. A character device driver may want to pass regs to the sysrq handler through the input layer which adds another few layers of parameter passing. I've build this code with allyesconfig for x86_64 and i386. I've runtested the main part of the code on FRV and i386, though I can't test most of the drivers. I've also done partial conversion for powerpc and MIPS - these at least compile with minimal configurations. This will affect all archs. Mostly the changes should be relatively easy. Take do_IRQ(), store the regs pointer at the beginning, saving the old one: struct pt_regs *old_regs = set_irq_regs(regs); And put the old one back at the end: set_irq_regs(old_regs); Don't pass regs through to generic_handle_irq() or __do_IRQ(). In timer_interrupt(), this sort of change will be necessary: - update_process_times(user_mode(regs)); - profile_tick(CPU_PROFILING, regs); + update_process_times(user_mode(get_irq_regs())); + profile_tick(CPU_PROFILING); I'd like to move update_process_times()'s use of get_irq_regs() into itself, except that i386, alone of the archs, uses something other than user_mode(). Some notes on the interrupt handling in the drivers: (*) input_dev() is now gone entirely. The regs pointer is no longer stored in the input_dev struct. (*) finish_unlinks() in drivers/usb/host/ohci-q.c needs checking. It does something different depending on whether it's been supplied with a regs pointer or not. (*) Various IRQ handler function pointers have been moved to type irq_handler_t. Signed-Off-By: David Howells <dhowells@redhat.com> (cherry picked from 1b16e7ac850969f38b375e511e3fa2f474a33867 commit)
2006-10-05 21:55:46 +08:00
static irqreturn_t irq_handler(int intno, void *dev_id)
{
int irq_bit;
unsigned long flags;
spin_lock_irqsave(&irqbits_lock, flags);
irq_bit = 1 << intno;
if ((irqbits & irq_bit) || !vm86_irqs[intno].tsk)
goto out;
irqbits |= irq_bit;
if (vm86_irqs[intno].sig)
send_sig(vm86_irqs[intno].sig, vm86_irqs[intno].tsk, 1);
/*
* IRQ will be re-enabled when user asks for the irq (whether
* polling or as a result of the signal)
*/
disable_irq_nosync(intno);
spin_unlock_irqrestore(&irqbits_lock, flags);
return IRQ_HANDLED;
out:
spin_unlock_irqrestore(&irqbits_lock, flags);
return IRQ_NONE;
}
static inline void free_vm86_irq(int irqnumber)
{
unsigned long flags;
free_irq(irqnumber, NULL);
vm86_irqs[irqnumber].tsk = NULL;
spin_lock_irqsave(&irqbits_lock, flags);
irqbits &= ~(1 << irqnumber);
spin_unlock_irqrestore(&irqbits_lock, flags);
}
void release_vm86_irqs(struct task_struct *task)
{
int i;
for (i = FIRST_VM86_IRQ ; i <= LAST_VM86_IRQ; i++)
if (vm86_irqs[i].tsk == task)
free_vm86_irq(i);
}
static inline int get_and_reset_irq(int irqnumber)
{
int bit;
unsigned long flags;
int ret = 0;
if (invalid_vm86_irq(irqnumber)) return 0;
if (vm86_irqs[irqnumber].tsk != current) return 0;
spin_lock_irqsave(&irqbits_lock, flags);
bit = irqbits & (1 << irqnumber);
irqbits &= ~bit;
if (bit) {
enable_irq(irqnumber);
ret = 1;
}
spin_unlock_irqrestore(&irqbits_lock, flags);
return ret;
}
static int do_vm86_irq_handling(int subfunction, int irqnumber)
{
int ret;
switch (subfunction) {
case VM86_GET_AND_RESET_IRQ: {
return get_and_reset_irq(irqnumber);
}
case VM86_GET_IRQ_BITS: {
return irqbits;
}
case VM86_REQUEST_IRQ: {
int sig = irqnumber >> 8;
int irq = irqnumber & 255;
if (!capable(CAP_SYS_ADMIN)) return -EPERM;
if (!((1 << sig) & ALLOWED_SIGS)) return -EPERM;
if (invalid_vm86_irq(irq)) return -EPERM;
if (vm86_irqs[irq].tsk) return -EPERM;
ret = request_irq(irq, &irq_handler, 0, VM86_IRQNAME, NULL);
if (ret) return ret;
vm86_irqs[irq].sig = sig;
vm86_irqs[irq].tsk = current;
return irq;
}
case VM86_FREE_IRQ: {
if (invalid_vm86_irq(irqnumber)) return -EPERM;
if (!vm86_irqs[irqnumber].tsk) return 0;
if (vm86_irqs[irqnumber].tsk != current) return -EPERM;
free_vm86_irq(irqnumber);
return 0;
}
}
return -EINVAL;
}