OpenCloudOS-Kernel/include/linux/cpuhotplug.h

402 lines
12 KiB
C
Raw Normal View History

License cleanup: add SPDX GPL-2.0 license identifier to files with no license Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-01 22:07:57 +08:00
/* SPDX-License-Identifier: GPL-2.0 */
#ifndef __CPUHOTPLUG_H
#define __CPUHOTPLUG_H
#include <linux/types.h>
/*
* CPU-up CPU-down
*
* BP AP BP AP
*
* OFFLINE OFFLINE
* | ^
* v |
* BRINGUP_CPU->AP_OFFLINE BRINGUP_CPU <- AP_IDLE_DEAD (idle thread/play_dead)
* | AP_OFFLINE
* v (IRQ-off) ,---------------^
* AP_ONLNE | (stop_machine)
* | TEARDOWN_CPU <- AP_ONLINE_IDLE
* | ^
* v |
* AP_ACTIVE AP_ACTIVE
*/
enum cpuhp_state {
CPUHP_INVALID = -1,
CPUHP_OFFLINE = 0,
CPUHP_CREATE_THREADS,
CPUHP_PERF_PREPARE,
CPUHP_PERF_X86_PREPARE,
CPUHP_PERF_X86_AMD_UNCORE_PREP,
CPUHP_PERF_POWER,
CPUHP_PERF_SUPERH,
CPUHP_X86_HPET_DEAD,
CPUHP_X86_APB_DEAD,
CPUHP_X86_MCE_DEAD,
CPUHP_VIRT_NET_DEAD,
CPUHP_SLUB_DEAD,
CPUHP_MM_WRITEBACK_DEAD,
CPUHP_MM_VMSTAT_DEAD,
CPUHP_SOFTIRQ_DEAD,
CPUHP_NET_MVNETA_DEAD,
CPUHP_CPUIDLE_DEAD,
CPUHP_ARM64_FPSIMD_DEAD,
CPUHP_ARM_OMAP_WAKE_DEAD,
CPUHP_IRQ_POLL_DEAD,
CPUHP_BLOCK_SOFTIRQ_DEAD,
CPUHP_ACPI_CPUDRV_DEAD,
CPUHP_S390_PFAULT_DEAD,
CPUHP_BLK_MQ_DEAD,
CPUHP_FS_BUFF_DEAD,
CPUHP_PRINTK_DEAD,
CPUHP_MM_MEMCQ_DEAD,
CPUHP_PERCPU_CNT_DEAD,
CPUHP_RADIX_DEAD,
CPUHP_PAGE_ALLOC_DEAD,
CPUHP_NET_DEV_DEAD,
CPUHP_PCI_XGENE_DEAD,
CPUHP_IOMMU_INTEL_DEAD,
CPUHP_LUSTRE_CFS_DEAD,
CPUHP_AP_ARM_CACHE_B15_RAC_DEAD,
CPUHP_WORKQUEUE_PREP,
CPUHP_POWER_NUMA_PREPARE,
CPUHP_HRTIMERS_PREPARE,
CPUHP_PROFILE_PREPARE,
CPUHP_X2APIC_PREPARE,
CPUHP_SMPCFD_PREPARE,
CPUHP_RELAY_PREPARE,
CPUHP_SLAB_PREPARE,
CPUHP_MD_RAID5_PREPARE,
CPUHP_RCUTREE_PREP,
CPUHP_CPUIDLE_COUPLED_PREPARE,
CPUHP_POWERPC_PMAC_PREPARE,
CPUHP_POWERPC_MMU_CTX_PREPARE,
CPUHP_XEN_PREPARE,
CPUHP_XEN_EVTCHN_PREPARE,
CPUHP_ARM_SHMOBILE_SCU_PREPARE,
CPUHP_SH_SH3X_PREPARE,
CPUHP_NET_FLOW_PREPARE,
CPUHP_TOPOLOGY_PREPARE,
CPUHP_NET_IUCV_PREPARE,
CPUHP_ARM_BL_PREPARE,
CPUHP_TRACE_RB_PREPARE,
CPUHP_MM_ZS_PREPARE,
CPUHP_MM_ZSWP_MEM_PREPARE,
CPUHP_MM_ZSWP_POOL_PREPARE,
CPUHP_KVM_PPC_BOOK3S_PREPARE,
CPUHP_ZCOMP_PREPARE,
CPUHP_TIMERS_PREPARE,
CPUHP_MIPS_SOC_PREPARE,
CPUHP_BP_PREPARE_DYN,
CPUHP_BP_PREPARE_DYN_END = CPUHP_BP_PREPARE_DYN + 20,
CPUHP_BRINGUP_CPU,
CPUHP_AP_IDLE_DEAD,
CPUHP_AP_OFFLINE,
CPUHP_AP_SCHED_STARTING,
CPUHP_AP_RCUTREE_DYING,
CPUHP_AP_IRQ_GIC_STARTING,
CPUHP_AP_IRQ_HIP04_STARTING,
CPUHP_AP_IRQ_ARMADA_XP_STARTING,
CPUHP_AP_IRQ_BCM2836_STARTING,
irqchip: mips-gic: Use irq_cpu_online to (un)mask all-VP(E) IRQs The gic_all_vpes_local_irq_controller chip currently attempts to operate on all CPUs/VPs in the system when masking or unmasking an interrupt. This has a few drawbacks: - In multi-cluster systems we may not always have access to all CPUs in the system. When all CPUs in a cluster are powered down that cluster's GIC may also power down, in which case we cannot configure its state. - Relatedly, if we power down a cluster after having configured interrupts for CPUs within it then the cluster's GIC may lose state & we need to reconfigure it. The current approach doesn't take this into account. - It's wasteful if we run Linux on fewer VPs than are present in the system. For example if we run a uniprocessor kernel on CPU0 of a system with 16 CPUs then there's no point in us configuring CPUs 1-15. - The implementation is also lacking in that it expects the range 0..gic_vpes-1 to represent valid Linux CPU numbers which may not always be the case - for example if we run on a system with more VPs than the kernel is configured to support. Fix all of these issues by only configuring the affected interrupts for CPUs which are online at the time, and recording the configuration in a new struct gic_all_vpes_chip_data for later use by CPUs being brought online. We register a CPU hotplug state (reusing CPUHP_AP_IRQ_GIC_STARTING which the ARM GIC driver uses, and which seems suitably generic for reuse with the MIPS GIC) and execute irq_cpu_online() in order to configure the interrupts on the newly onlined CPU. Signed-off-by: Paul Burton <paul.burton@mips.com> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-mips@linux-mips.org Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2017-11-01 00:41:45 +08:00
CPUHP_AP_IRQ_MIPS_GIC_STARTING,
CPUHP_AP_ARM_MVEBU_COHERENCY,
2019-06-13 21:49:02 +08:00
CPUHP_AP_MICROCODE_LOADER,
CPUHP_AP_PERF_X86_AMD_UNCORE_STARTING,
CPUHP_AP_PERF_X86_STARTING,
CPUHP_AP_PERF_X86_AMD_IBS_STARTING,
CPUHP_AP_PERF_X86_CQM_STARTING,
CPUHP_AP_PERF_X86_CSTATE_STARTING,
CPUHP_AP_PERF_XTENSA_STARTING,
CPUHP_AP_MIPS_OP_LOONGSON3_STARTING,
CPUHP_AP_ARM_SDEI_STARTING,
CPUHP_AP_ARM_VFP_STARTING,
CPUHP_AP_ARM64_DEBUG_MONITORS_STARTING,
CPUHP_AP_PERF_ARM_HW_BREAKPOINT_STARTING,
CPUHP_AP_PERF_ARM_ACPI_STARTING,
CPUHP_AP_PERF_ARM_STARTING,
CPUHP_AP_ARM_L2X0_STARTING,
CPUHP_AP_EXYNOS4_MCT_TIMER_STARTING,
CPUHP_AP_ARM_ARCH_TIMER_STARTING,
CPUHP_AP_ARM_GLOBAL_TIMER_STARTING,
clocksource: Add J-Core timer/clocksource driver At the hardware level, the J-Core PIT is integrated with the interrupt controller, but it is represented as its own device and has an independent programming interface. It provides a 12-bit countdown timer, which is not presently used, and a periodic timer. The interval length for the latter is programmable via a 32-bit throttle register whose units are determined by a bus-period register. The periodic timer is used to implement both periodic and oneshot clock event modes; in oneshot mode the interrupt handler simply disables the timer as soon as it fires. Despite its device tree node representing an interrupt for the PIT, the actual irq generated is programmable, not hard-wired. The driver is responsible for programming the PIT to generate the hardware irq number that the DT assigns to it. On SMP configurations, J-Core provides cpu-local instances of the PIT; no broadcast timer is needed. This driver supports the creation of the necessary per-cpu clock_event_device instances. A nanosecond-resolution clocksource is provided using the J-Core "RTC" registers, which give a 64-bit seconds count and 32-bit nanoseconds that wrap every second. The driver converts these to a full-range 32-bit nanoseconds count. Signed-off-by: Rich Felker <dalias@libc.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: devicetree@vger.kernel.org Cc: linux-sh@vger.kernel.org Cc: Daniel Lezcano <daniel.lezcano@linaro.org> Cc: Rob Herring <robh+dt@kernel.org> Link: http://lkml.kernel.org/r/b591ff12cc5ebf63d1edc98da26046f95a233814.1476393790.git.dalias@libc.org Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-10-14 05:51:06 +08:00
CPUHP_AP_JCORE_TIMER_STARTING,
CPUHP_AP_ARM_TWD_STARTING,
CPUHP_AP_QCOM_TIMER_STARTING,
CPUHP_AP_TEGRA_TIMER_STARTING,
CPUHP_AP_ARMADA_TIMER_STARTING,
CPUHP_AP_MARCO_TIMER_STARTING,
CPUHP_AP_MIPS_GIC_TIMER_STARTING,
CPUHP_AP_ARC_TIMER_STARTING,
CPUHP_AP_RISCV_TIMER_STARTING,
CPUHP_AP_CSKY_TIMER_STARTING,
CPUHP_AP_KVM_STARTING,
CPUHP_AP_KVM_ARM_VGIC_INIT_STARTING,
CPUHP_AP_KVM_ARM_VGIC_STARTING,
CPUHP_AP_KVM_ARM_TIMER_STARTING,
/* Must be the last timer callback */
CPUHP_AP_DUMMY_TIMER_STARTING,
CPUHP_AP_ARM_XEN_STARTING,
CPUHP_AP_ARM_CORESIGHT_STARTING,
CPUHP_AP_ARM64_ISNDEP_STARTING,
CPUHP_AP_SMPCFD_DYING,
CPUHP_AP_X86_TBOOT_DYING,
CPUHP_AP_ARM_CACHE_B15_RAC_DYING,
CPUHP_AP_ONLINE,
CPUHP_TEARDOWN_CPU,
CPUHP_AP_ONLINE_IDLE,
CPUHP_AP_SMPBOOT_THREADS,
CPUHP_AP_X86_VDSO_VMA_ONLINE,
genirq/cpuhotplug: Handle managed IRQs on CPU hotplug If a CPU goes offline, interrupts affine to the CPU are moved away. If the outgoing CPU is the last CPU in the affinity mask the migration code breaks the affinity and sets it it all online cpus. This is a problem for affinity managed interrupts as CPU hotplug is often used for power management purposes. If the affinity is broken, the interrupt is not longer affine to the CPUs to which it was allocated. The affinity spreading allows to lay out multi queue devices in a way that they are assigned to a single CPU or a group of CPUs. If the last CPU goes offline, then the queue is not longer used, so the interrupt can be shutdown gracefully and parked until one of the assigned CPUs comes online again. Add a graceful shutdown mechanism into the irq affinity breaking code path, mark the irq as MANAGED_SHUTDOWN and leave the affinity mask unmodified. In the online path, scan the active interrupts for managed interrupts and if the interrupt is functional and the newly online CPU is part of the affinity mask, restart the interrupt if it is marked MANAGED_SHUTDOWN or if the interrupts is started up, try to add the CPU back to the effective affinity mask. Originally-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Jens Axboe <axboe@kernel.dk> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Keith Busch <keith.busch@intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20170619235447.273417334@linutronix.de
2017-06-20 07:37:51 +08:00
CPUHP_AP_IRQ_AFFINITY_ONLINE,
CPUHP_AP_ARM_MVEBU_SYNC_CLOCKS,
PM / arch: x86: Rework the MSR_IA32_ENERGY_PERF_BIAS handling The current handling of MSR_IA32_ENERGY_PERF_BIAS in the kernel is problematic, because it may cause changes made by user space to that MSR (with the help of the x86_energy_perf_policy tool, for example) to be lost every time a CPU goes offline and then back online as well as during system-wide power management transitions into sleep states and back into the working state. The first problem is that if the current EPB value for a CPU going online is 0 ('performance'), the kernel will change it to 6 ('normal') regardless of whether or not this is the first bring-up of that CPU. That also happens during system-wide resume from sleep states (including, but not limited to, hibernation). However, the EPB may have been adjusted by user space this way and the kernel should not blindly override that setting. The second problem is that if the platform firmware resets the EPB values for any CPUs during system-wide resume from a sleep state, the kernel will not restore their previous EPB values that may have been set by user space before the preceding system-wide suspend transition. Again, that behavior may at least be confusing from the user space perspective. In order to address these issues, rework the handling of MSR_IA32_ENERGY_PERF_BIAS so that the EPB value is saved on CPU offline and restored on CPU online as well as (for the boot CPU) during the syscore stages of system-wide suspend and resume transitions, respectively. However, retain the policy by which the EPB is set to 6 ('normal') on the first bring-up of each CPU if its initial value is 0, based on the observation that 0 may mean 'not initialized' just as well as 'performance' in that case. While at it, move the MSR_IA32_ENERGY_PERF_BIAS handling code into a separate file and document it in Documentation/admin-guide. Fixes: abe48b108247 (x86, intel, power: Initialize MSR_IA32_ENERGY_PERF_BIAS) Fixes: b51ef52df71c (x86/cpu: Restore MSR_IA32_ENERGY_PERF_BIAS after resume) Reported-by: Thomas Renninger <trenn@suse.de> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Acked-by: Borislav Petkov <bp@suse.de> Acked-by: Thomas Gleixner <tglx@linutronix.de>
2019-03-22 06:18:01 +08:00
CPUHP_AP_X86_INTEL_EPB_ONLINE,
CPUHP_AP_PERF_ONLINE,
CPUHP_AP_PERF_X86_ONLINE,
CPUHP_AP_PERF_X86_UNCORE_ONLINE,
CPUHP_AP_PERF_X86_AMD_UNCORE_ONLINE,
CPUHP_AP_PERF_X86_AMD_POWER_ONLINE,
CPUHP_AP_PERF_X86_RAPL_ONLINE,
CPUHP_AP_PERF_X86_CQM_ONLINE,
CPUHP_AP_PERF_X86_CSTATE_ONLINE,
CPUHP_AP_PERF_S390_CF_ONLINE,
CPUHP_AP_PERF_S390_SF_ONLINE,
CPUHP_AP_PERF_ARM_CCI_ONLINE,
CPUHP_AP_PERF_ARM_CCN_ONLINE,
CPUHP_AP_PERF_ARM_HISI_DDRC_ONLINE,
CPUHP_AP_PERF_ARM_HISI_HHA_ONLINE,
CPUHP_AP_PERF_ARM_HISI_L3_ONLINE,
CPUHP_AP_PERF_ARM_L2X0_ONLINE,
CPUHP_AP_PERF_ARM_QCOM_L2_ONLINE,
CPUHP_AP_PERF_ARM_QCOM_L3_ONLINE,
CPUHP_AP_PERF_ARM_APM_XGENE_ONLINE,
CPUHP_AP_PERF_ARM_CAVIUM_TX2_UNCORE_ONLINE,
CPUHP_AP_PERF_POWERPC_NEST_IMC_ONLINE,
CPUHP_AP_PERF_POWERPC_CORE_IMC_ONLINE,
CPUHP_AP_PERF_POWERPC_THREAD_IMC_ONLINE,
CPUHP_AP_PERF_POWERPC_TRACE_IMC_ONLINE,
CPUHP_AP_WATCHDOG_ONLINE,
CPUHP_AP_WORKQUEUE_ONLINE,
CPUHP_AP_RCUTREE_ONLINE,
CPUHP_AP_BASE_CACHEINFO_ONLINE,
CPUHP_AP_ONLINE_DYN,
CPUHP_AP_ONLINE_DYN_END = CPUHP_AP_ONLINE_DYN + 30,
CPUHP_AP_X86_HPET_ONLINE,
CPUHP_AP_X86_KVM_CLK_ONLINE,
CPUHP_AP_ACTIVE,
CPUHP_ONLINE,
};
cpu/hotplug: Implement setup/removal interface Implement function which allow to setup/remove hotplug state callbacks. The default behaviour for setup is to call the startup function for this state for (or on) all cpus which have a hotplug state >= the installed state. The default behaviour for removal is to call the teardown function for this state for (or on) all cpus which have a hotplug state >= the installed state. This includes rollback to the previous state in case of failure. A special state is CPUHP_ONLINE_DYN. Its for dynamically registering a hotplug callback pair. This is for drivers which have no dependencies to avoid that we need to allocate CPUHP states for each of them For both setup and remove helper functions are provided, which prevent the core to issue the callbacks. This simplifies the conversion of existing hotplug notifiers. [ Dynamic registering implemented by Sebastian Siewior ] Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: linux-arch@vger.kernel.org Cc: Rik van Riel <riel@redhat.com> Cc: Rafael Wysocki <rafael.j.wysocki@intel.com> Cc: "Srivatsa S. Bhat" <srivatsa@mit.edu> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: Sebastian Siewior <bigeasy@linutronix.de> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Tejun Heo <tj@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Paul McKenney <paulmck@linux.vnet.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Paul Turner <pjt@google.com> Link: http://lkml.kernel.org/r/20160226182341.103464877@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-02-27 02:43:33 +08:00
int __cpuhp_setup_state(enum cpuhp_state state, const char *name, bool invoke,
int (*startup)(unsigned int cpu),
int (*teardown)(unsigned int cpu), bool multi_instance);
cpu/hotplug: Implement setup/removal interface Implement function which allow to setup/remove hotplug state callbacks. The default behaviour for setup is to call the startup function for this state for (or on) all cpus which have a hotplug state >= the installed state. The default behaviour for removal is to call the teardown function for this state for (or on) all cpus which have a hotplug state >= the installed state. This includes rollback to the previous state in case of failure. A special state is CPUHP_ONLINE_DYN. Its for dynamically registering a hotplug callback pair. This is for drivers which have no dependencies to avoid that we need to allocate CPUHP states for each of them For both setup and remove helper functions are provided, which prevent the core to issue the callbacks. This simplifies the conversion of existing hotplug notifiers. [ Dynamic registering implemented by Sebastian Siewior ] Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: linux-arch@vger.kernel.org Cc: Rik van Riel <riel@redhat.com> Cc: Rafael Wysocki <rafael.j.wysocki@intel.com> Cc: "Srivatsa S. Bhat" <srivatsa@mit.edu> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: Sebastian Siewior <bigeasy@linutronix.de> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Tejun Heo <tj@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Paul McKenney <paulmck@linux.vnet.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Paul Turner <pjt@google.com> Link: http://lkml.kernel.org/r/20160226182341.103464877@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-02-27 02:43:33 +08:00
int __cpuhp_setup_state_cpuslocked(enum cpuhp_state state, const char *name,
bool invoke,
int (*startup)(unsigned int cpu),
int (*teardown)(unsigned int cpu),
bool multi_instance);
cpu/hotplug: Implement setup/removal interface Implement function which allow to setup/remove hotplug state callbacks. The default behaviour for setup is to call the startup function for this state for (or on) all cpus which have a hotplug state >= the installed state. The default behaviour for removal is to call the teardown function for this state for (or on) all cpus which have a hotplug state >= the installed state. This includes rollback to the previous state in case of failure. A special state is CPUHP_ONLINE_DYN. Its for dynamically registering a hotplug callback pair. This is for drivers which have no dependencies to avoid that we need to allocate CPUHP states for each of them For both setup and remove helper functions are provided, which prevent the core to issue the callbacks. This simplifies the conversion of existing hotplug notifiers. [ Dynamic registering implemented by Sebastian Siewior ] Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: linux-arch@vger.kernel.org Cc: Rik van Riel <riel@redhat.com> Cc: Rafael Wysocki <rafael.j.wysocki@intel.com> Cc: "Srivatsa S. Bhat" <srivatsa@mit.edu> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: Sebastian Siewior <bigeasy@linutronix.de> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Tejun Heo <tj@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Paul McKenney <paulmck@linux.vnet.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Paul Turner <pjt@google.com> Link: http://lkml.kernel.org/r/20160226182341.103464877@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-02-27 02:43:33 +08:00
/**
* cpuhp_setup_state - Setup hotplug state callbacks with calling the callbacks
* @state: The state for which the calls are installed
* @name: Name of the callback (will be used in debug output)
* @startup: startup callback function
* @teardown: teardown callback function
*
* Installs the callback functions and invokes the startup callback on
* the present cpus which have already reached the @state.
*/
static inline int cpuhp_setup_state(enum cpuhp_state state,
const char *name,
int (*startup)(unsigned int cpu),
int (*teardown)(unsigned int cpu))
{
return __cpuhp_setup_state(state, name, true, startup, teardown, false);
cpu/hotplug: Implement setup/removal interface Implement function which allow to setup/remove hotplug state callbacks. The default behaviour for setup is to call the startup function for this state for (or on) all cpus which have a hotplug state >= the installed state. The default behaviour for removal is to call the teardown function for this state for (or on) all cpus which have a hotplug state >= the installed state. This includes rollback to the previous state in case of failure. A special state is CPUHP_ONLINE_DYN. Its for dynamically registering a hotplug callback pair. This is for drivers which have no dependencies to avoid that we need to allocate CPUHP states for each of them For both setup and remove helper functions are provided, which prevent the core to issue the callbacks. This simplifies the conversion of existing hotplug notifiers. [ Dynamic registering implemented by Sebastian Siewior ] Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: linux-arch@vger.kernel.org Cc: Rik van Riel <riel@redhat.com> Cc: Rafael Wysocki <rafael.j.wysocki@intel.com> Cc: "Srivatsa S. Bhat" <srivatsa@mit.edu> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: Sebastian Siewior <bigeasy@linutronix.de> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Tejun Heo <tj@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Paul McKenney <paulmck@linux.vnet.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Paul Turner <pjt@google.com> Link: http://lkml.kernel.org/r/20160226182341.103464877@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-02-27 02:43:33 +08:00
}
static inline int cpuhp_setup_state_cpuslocked(enum cpuhp_state state,
const char *name,
int (*startup)(unsigned int cpu),
int (*teardown)(unsigned int cpu))
{
return __cpuhp_setup_state_cpuslocked(state, name, true, startup,
teardown, false);
}
cpu/hotplug: Implement setup/removal interface Implement function which allow to setup/remove hotplug state callbacks. The default behaviour for setup is to call the startup function for this state for (or on) all cpus which have a hotplug state >= the installed state. The default behaviour for removal is to call the teardown function for this state for (or on) all cpus which have a hotplug state >= the installed state. This includes rollback to the previous state in case of failure. A special state is CPUHP_ONLINE_DYN. Its for dynamically registering a hotplug callback pair. This is for drivers which have no dependencies to avoid that we need to allocate CPUHP states for each of them For both setup and remove helper functions are provided, which prevent the core to issue the callbacks. This simplifies the conversion of existing hotplug notifiers. [ Dynamic registering implemented by Sebastian Siewior ] Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: linux-arch@vger.kernel.org Cc: Rik van Riel <riel@redhat.com> Cc: Rafael Wysocki <rafael.j.wysocki@intel.com> Cc: "Srivatsa S. Bhat" <srivatsa@mit.edu> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: Sebastian Siewior <bigeasy@linutronix.de> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Tejun Heo <tj@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Paul McKenney <paulmck@linux.vnet.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Paul Turner <pjt@google.com> Link: http://lkml.kernel.org/r/20160226182341.103464877@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-02-27 02:43:33 +08:00
/**
* cpuhp_setup_state_nocalls - Setup hotplug state callbacks without calling the
* callbacks
* @state: The state for which the calls are installed
* @name: Name of the callback.
* @startup: startup callback function
* @teardown: teardown callback function
*
* Same as @cpuhp_setup_state except that no calls are executed are invoked
* during installation of this callback. NOP if SMP=n or HOTPLUG_CPU=n.
*/
static inline int cpuhp_setup_state_nocalls(enum cpuhp_state state,
const char *name,
int (*startup)(unsigned int cpu),
int (*teardown)(unsigned int cpu))
{
return __cpuhp_setup_state(state, name, false, startup, teardown,
false);
}
static inline int cpuhp_setup_state_nocalls_cpuslocked(enum cpuhp_state state,
const char *name,
int (*startup)(unsigned int cpu),
int (*teardown)(unsigned int cpu))
{
return __cpuhp_setup_state_cpuslocked(state, name, false, startup,
teardown, false);
}
/**
* cpuhp_setup_state_multi - Add callbacks for multi state
* @state: The state for which the calls are installed
* @name: Name of the callback.
* @startup: startup callback function
* @teardown: teardown callback function
*
* Sets the internal multi_instance flag and prepares a state to work as a multi
* instance callback. No callbacks are invoked at this point. The callbacks are
* invoked once an instance for this state are registered via
* @cpuhp_state_add_instance or @cpuhp_state_add_instance_nocalls.
*/
static inline int cpuhp_setup_state_multi(enum cpuhp_state state,
const char *name,
int (*startup)(unsigned int cpu,
struct hlist_node *node),
int (*teardown)(unsigned int cpu,
struct hlist_node *node))
{
return __cpuhp_setup_state(state, name, false,
(void *) startup,
(void *) teardown, true);
}
int __cpuhp_state_add_instance(enum cpuhp_state state, struct hlist_node *node,
bool invoke);
int __cpuhp_state_add_instance_cpuslocked(enum cpuhp_state state,
struct hlist_node *node, bool invoke);
/**
* cpuhp_state_add_instance - Add an instance for a state and invoke startup
* callback.
* @state: The state for which the instance is installed
* @node: The node for this individual state.
*
* Installs the instance for the @state and invokes the startup callback on
* the present cpus which have already reached the @state. The @state must have
* been earlier marked as multi-instance by @cpuhp_setup_state_multi.
*/
static inline int cpuhp_state_add_instance(enum cpuhp_state state,
struct hlist_node *node)
{
return __cpuhp_state_add_instance(state, node, true);
}
/**
* cpuhp_state_add_instance_nocalls - Add an instance for a state without
* invoking the startup callback.
* @state: The state for which the instance is installed
* @node: The node for this individual state.
*
* Installs the instance for the @state The @state must have been earlier
* marked as multi-instance by @cpuhp_setup_state_multi.
*/
static inline int cpuhp_state_add_instance_nocalls(enum cpuhp_state state,
struct hlist_node *node)
{
return __cpuhp_state_add_instance(state, node, false);
cpu/hotplug: Implement setup/removal interface Implement function which allow to setup/remove hotplug state callbacks. The default behaviour for setup is to call the startup function for this state for (or on) all cpus which have a hotplug state >= the installed state. The default behaviour for removal is to call the teardown function for this state for (or on) all cpus which have a hotplug state >= the installed state. This includes rollback to the previous state in case of failure. A special state is CPUHP_ONLINE_DYN. Its for dynamically registering a hotplug callback pair. This is for drivers which have no dependencies to avoid that we need to allocate CPUHP states for each of them For both setup and remove helper functions are provided, which prevent the core to issue the callbacks. This simplifies the conversion of existing hotplug notifiers. [ Dynamic registering implemented by Sebastian Siewior ] Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: linux-arch@vger.kernel.org Cc: Rik van Riel <riel@redhat.com> Cc: Rafael Wysocki <rafael.j.wysocki@intel.com> Cc: "Srivatsa S. Bhat" <srivatsa@mit.edu> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: Sebastian Siewior <bigeasy@linutronix.de> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Tejun Heo <tj@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Paul McKenney <paulmck@linux.vnet.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Paul Turner <pjt@google.com> Link: http://lkml.kernel.org/r/20160226182341.103464877@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-02-27 02:43:33 +08:00
}
static inline int
cpuhp_state_add_instance_nocalls_cpuslocked(enum cpuhp_state state,
struct hlist_node *node)
{
return __cpuhp_state_add_instance_cpuslocked(state, node, false);
}
cpu/hotplug: Implement setup/removal interface Implement function which allow to setup/remove hotplug state callbacks. The default behaviour for setup is to call the startup function for this state for (or on) all cpus which have a hotplug state >= the installed state. The default behaviour for removal is to call the teardown function for this state for (or on) all cpus which have a hotplug state >= the installed state. This includes rollback to the previous state in case of failure. A special state is CPUHP_ONLINE_DYN. Its for dynamically registering a hotplug callback pair. This is for drivers which have no dependencies to avoid that we need to allocate CPUHP states for each of them For both setup and remove helper functions are provided, which prevent the core to issue the callbacks. This simplifies the conversion of existing hotplug notifiers. [ Dynamic registering implemented by Sebastian Siewior ] Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: linux-arch@vger.kernel.org Cc: Rik van Riel <riel@redhat.com> Cc: Rafael Wysocki <rafael.j.wysocki@intel.com> Cc: "Srivatsa S. Bhat" <srivatsa@mit.edu> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: Sebastian Siewior <bigeasy@linutronix.de> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Tejun Heo <tj@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Paul McKenney <paulmck@linux.vnet.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Paul Turner <pjt@google.com> Link: http://lkml.kernel.org/r/20160226182341.103464877@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-02-27 02:43:33 +08:00
void __cpuhp_remove_state(enum cpuhp_state state, bool invoke);
void __cpuhp_remove_state_cpuslocked(enum cpuhp_state state, bool invoke);
cpu/hotplug: Implement setup/removal interface Implement function which allow to setup/remove hotplug state callbacks. The default behaviour for setup is to call the startup function for this state for (or on) all cpus which have a hotplug state >= the installed state. The default behaviour for removal is to call the teardown function for this state for (or on) all cpus which have a hotplug state >= the installed state. This includes rollback to the previous state in case of failure. A special state is CPUHP_ONLINE_DYN. Its for dynamically registering a hotplug callback pair. This is for drivers which have no dependencies to avoid that we need to allocate CPUHP states for each of them For both setup and remove helper functions are provided, which prevent the core to issue the callbacks. This simplifies the conversion of existing hotplug notifiers. [ Dynamic registering implemented by Sebastian Siewior ] Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: linux-arch@vger.kernel.org Cc: Rik van Riel <riel@redhat.com> Cc: Rafael Wysocki <rafael.j.wysocki@intel.com> Cc: "Srivatsa S. Bhat" <srivatsa@mit.edu> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: Sebastian Siewior <bigeasy@linutronix.de> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Tejun Heo <tj@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Paul McKenney <paulmck@linux.vnet.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Paul Turner <pjt@google.com> Link: http://lkml.kernel.org/r/20160226182341.103464877@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-02-27 02:43:33 +08:00
/**
* cpuhp_remove_state - Remove hotplug state callbacks and invoke the teardown
* @state: The state for which the calls are removed
*
* Removes the callback functions and invokes the teardown callback on
* the present cpus which have already reached the @state.
*/
static inline void cpuhp_remove_state(enum cpuhp_state state)
{
__cpuhp_remove_state(state, true);
}
/**
* cpuhp_remove_state_nocalls - Remove hotplug state callbacks without invoking
* teardown
* @state: The state for which the calls are removed
*/
static inline void cpuhp_remove_state_nocalls(enum cpuhp_state state)
{
__cpuhp_remove_state(state, false);
}
static inline void cpuhp_remove_state_nocalls_cpuslocked(enum cpuhp_state state)
{
__cpuhp_remove_state_cpuslocked(state, false);
}
/**
* cpuhp_remove_multi_state - Remove hotplug multi state callback
* @state: The state for which the calls are removed
*
* Removes the callback functions from a multi state. This is the reverse of
* cpuhp_setup_state_multi(). All instances should have been removed before
* invoking this function.
*/
static inline void cpuhp_remove_multi_state(enum cpuhp_state state)
{
__cpuhp_remove_state(state, false);
}
int __cpuhp_state_remove_instance(enum cpuhp_state state,
struct hlist_node *node, bool invoke);
/**
* cpuhp_state_remove_instance - Remove hotplug instance from state and invoke
* the teardown callback
* @state: The state from which the instance is removed
* @node: The node for this individual state.
*
* Removes the instance and invokes the teardown callback on the present cpus
* which have already reached the @state.
*/
static inline int cpuhp_state_remove_instance(enum cpuhp_state state,
struct hlist_node *node)
{
return __cpuhp_state_remove_instance(state, node, true);
}
/**
* cpuhp_state_remove_instance_nocalls - Remove hotplug instance from state
* without invoking the reatdown callback
* @state: The state from which the instance is removed
* @node: The node for this individual state.
*
* Removes the instance without invoking the teardown callback.
*/
static inline int cpuhp_state_remove_instance_nocalls(enum cpuhp_state state,
struct hlist_node *node)
{
return __cpuhp_state_remove_instance(state, node, false);
}
#ifdef CONFIG_SMP
void cpuhp_online_idle(enum cpuhp_state state);
#else
static inline void cpuhp_online_idle(enum cpuhp_state state) { }
#endif
#endif