UbiquitousOS
/
OpenCloudOS-Kernel
mirror of https://gitee.com/OpenCloudOS/OpenCloudOS-Kernel.git
11
0
Fork 0
Code Issues Projects Releases Wiki Activity
OpenCloudOS-Kernel/drivers/usb/cdns3/core.h

137 lines
4.3 KiB
C
Raw Normal View History

usb: cdns3: Add Cadence USB3 DRD Driver This patch introduce new Cadence USBSS DRD driver to Linux kernel. The Cadence USBSS DRD Controller is a highly configurable IP Core which can be instantiated as Dual-Role Device (DRD), Peripheral Only and Host Only (XHCI)configurations. The current driver has been validated with FPGA platform. We have support for PCIe bus, which is used on FPGA prototyping. The host side of USBSS-DRD controller is compliant with XHCI specification, so it works with standard XHCI Linux driver. Signed-off-by: Pawel Laszczak <pawell@cadence.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2019-08-26 19:19:30 +08:00
/* SPDX-License-Identifier: GPL-2.0 */
/*
usb: cdnsp: cdns3 Add main part of Cadence USBSSP DRD Driver This patch introduces the main part of Cadence USBSSP DRD driver to Linux kernel. To reduce the patch size a little bit, the header file gadget.h was intentionally added as separate patch. The Cadence USBSSP DRD Controller is a highly configurable IP Core which can be instantiated as Dual-Role Device (DRD), Peripheral Only and Host Only (XHCI)configurations. The current driver has been validated with FPGA platform. We have support for PCIe bus, which is used on FPGA prototyping. The host side of USBSS DRD controller is compliant with XHCI. The architecture for device side is almost the same as for host side, and most of the XHCI specification can be used to understand how this controller operates. Signed-off-by: Pawel Laszczak <pawell@cadence.com> Signed-off-by: Peter Chen <peter.chen@nxp.com>
2020-12-07 18:32:24 +08:00
* Cadence USBSS and USBSSP DRD Header File.
usb: cdns3: Add Cadence USB3 DRD Driver This patch introduce new Cadence USBSS DRD driver to Linux kernel. The Cadence USBSS DRD Controller is a highly configurable IP Core which can be instantiated as Dual-Role Device (DRD), Peripheral Only and Host Only (XHCI)configurations. The current driver has been validated with FPGA platform. We have support for PCIe bus, which is used on FPGA prototyping. The host side of USBSS-DRD controller is compliant with XHCI specification, so it works with standard XHCI Linux driver. Signed-off-by: Pawel Laszczak <pawell@cadence.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2019-08-26 19:19:30 +08:00
*
* Copyright (C) 2017-2018 NXP
* Copyright (C) 2018-2019 Cadence.
*
* Authors: Peter Chen <peter.chen@nxp.com>
* Pawel Laszczak <pawell@cadence.com>
*/
#include <linux/usb/otg.h>
#include <linux/usb/role.h>
#ifndef __LINUX_CDNS3_CORE_H
#define __LINUX_CDNS3_CORE_H
usb: cdns3: Refactoring names in reusable code Patch change the functions and objects names in reusable code. The reusable code includes core.c, core.h, drd.c and drd.h files. It also changes the names of all references to these functions and objects in other cdns3 files. There are a lot of changes, but all changes are very trivial. The reason of this patch is to avoid of mixing prefix cdns3 and cdnsp in in cdnsp driver what could introduce some confusion in understanding of cdnsp driver. This patch assumes to use three different prefixes in Cadence USB drivers: cdns: for common reusable code cdnsp: for names related only with cdnsp driver cdns3: for names related only with cdns3 driver Signed-off-by: Pawel Laszczak <pawell@cadence.com> Tested-by: Aswath Govindraju <a-govindraju@ti.com> Signed-off-by: Peter Chen <peter.chen@nxp.com>
2020-12-07 18:32:21 +08:00
struct cdns;
usb: cdns3: Add Cadence USB3 DRD Driver This patch introduce new Cadence USBSS DRD driver to Linux kernel. The Cadence USBSS DRD Controller is a highly configurable IP Core which can be instantiated as Dual-Role Device (DRD), Peripheral Only and Host Only (XHCI)configurations. The current driver has been validated with FPGA platform. We have support for PCIe bus, which is used on FPGA prototyping. The host side of USBSS-DRD controller is compliant with XHCI specification, so it works with standard XHCI Linux driver. Signed-off-by: Pawel Laszczak <pawell@cadence.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2019-08-26 19:19:30 +08:00
/**
usb: cdns3: Refactoring names in reusable code Patch change the functions and objects names in reusable code. The reusable code includes core.c, core.h, drd.c and drd.h files. It also changes the names of all references to these functions and objects in other cdns3 files. There are a lot of changes, but all changes are very trivial. The reason of this patch is to avoid of mixing prefix cdns3 and cdnsp in in cdnsp driver what could introduce some confusion in understanding of cdnsp driver. This patch assumes to use three different prefixes in Cadence USB drivers: cdns: for common reusable code cdnsp: for names related only with cdnsp driver cdns3: for names related only with cdns3 driver Signed-off-by: Pawel Laszczak <pawell@cadence.com> Tested-by: Aswath Govindraju <a-govindraju@ti.com> Signed-off-by: Peter Chen <peter.chen@nxp.com>
2020-12-07 18:32:21 +08:00
* struct cdns_role_driver - host/gadget role driver
usb: cdns3: Add Cadence USB3 DRD Driver This patch introduce new Cadence USBSS DRD driver to Linux kernel. The Cadence USBSS DRD Controller is a highly configurable IP Core which can be instantiated as Dual-Role Device (DRD), Peripheral Only and Host Only (XHCI)configurations. The current driver has been validated with FPGA platform. We have support for PCIe bus, which is used on FPGA prototyping. The host side of USBSS-DRD controller is compliant with XHCI specification, so it works with standard XHCI Linux driver. Signed-off-by: Pawel Laszczak <pawell@cadence.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2019-08-26 19:19:30 +08:00
* @start: start this role
* @stop: stop this role
* @suspend: suspend callback for this role
* @resume: resume callback for this role
* @irq: irq handler for this role
* @name: role name string (host/gadget)
* @state: current state
*/
usb: cdns3: Refactoring names in reusable code Patch change the functions and objects names in reusable code. The reusable code includes core.c, core.h, drd.c and drd.h files. It also changes the names of all references to these functions and objects in other cdns3 files. There are a lot of changes, but all changes are very trivial. The reason of this patch is to avoid of mixing prefix cdns3 and cdnsp in in cdnsp driver what could introduce some confusion in understanding of cdnsp driver. This patch assumes to use three different prefixes in Cadence USB drivers: cdns: for common reusable code cdnsp: for names related only with cdnsp driver cdns3: for names related only with cdns3 driver Signed-off-by: Pawel Laszczak <pawell@cadence.com> Tested-by: Aswath Govindraju <a-govindraju@ti.com> Signed-off-by: Peter Chen <peter.chen@nxp.com>
2020-12-07 18:32:21 +08:00
struct cdns_role_driver {
int (*start)(struct cdns *cdns);
void (*stop)(struct cdns *cdns);
int (*suspend)(struct cdns *cdns, bool do_wakeup);
int (*resume)(struct cdns *cdns, bool hibernated);
usb: cdns3: Add Cadence USB3 DRD Driver This patch introduce new Cadence USBSS DRD driver to Linux kernel. The Cadence USBSS DRD Controller is a highly configurable IP Core which can be instantiated as Dual-Role Device (DRD), Peripheral Only and Host Only (XHCI)configurations. The current driver has been validated with FPGA platform. We have support for PCIe bus, which is used on FPGA prototyping. The host side of USBSS-DRD controller is compliant with XHCI specification, so it works with standard XHCI Linux driver. Signed-off-by: Pawel Laszczak <pawell@cadence.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2019-08-26 19:19:30 +08:00
const char *name;
usb: cdns3: Refactoring names in reusable code Patch change the functions and objects names in reusable code. The reusable code includes core.c, core.h, drd.c and drd.h files. It also changes the names of all references to these functions and objects in other cdns3 files. There are a lot of changes, but all changes are very trivial. The reason of this patch is to avoid of mixing prefix cdns3 and cdnsp in in cdnsp driver what could introduce some confusion in understanding of cdnsp driver. This patch assumes to use three different prefixes in Cadence USB drivers: cdns: for common reusable code cdnsp: for names related only with cdnsp driver cdns3: for names related only with cdns3 driver Signed-off-by: Pawel Laszczak <pawell@cadence.com> Tested-by: Aswath Govindraju <a-govindraju@ti.com> Signed-off-by: Peter Chen <peter.chen@nxp.com>
2020-12-07 18:32:21 +08:00
#define CDNS_ROLE_STATE_INACTIVE 0
#define CDNS_ROLE_STATE_ACTIVE 1
usb: cdns3: Add Cadence USB3 DRD Driver This patch introduce new Cadence USBSS DRD driver to Linux kernel. The Cadence USBSS DRD Controller is a highly configurable IP Core which can be instantiated as Dual-Role Device (DRD), Peripheral Only and Host Only (XHCI)configurations. The current driver has been validated with FPGA platform. We have support for PCIe bus, which is used on FPGA prototyping. The host side of USBSS-DRD controller is compliant with XHCI specification, so it works with standard XHCI Linux driver. Signed-off-by: Pawel Laszczak <pawell@cadence.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2019-08-26 19:19:30 +08:00
int state;
};
usb: cdns3: Refactoring names in reusable code Patch change the functions and objects names in reusable code. The reusable code includes core.c, core.h, drd.c and drd.h files. It also changes the names of all references to these functions and objects in other cdns3 files. There are a lot of changes, but all changes are very trivial. The reason of this patch is to avoid of mixing prefix cdns3 and cdnsp in in cdnsp driver what could introduce some confusion in understanding of cdnsp driver. This patch assumes to use three different prefixes in Cadence USB drivers: cdns: for common reusable code cdnsp: for names related only with cdnsp driver cdns3: for names related only with cdns3 driver Signed-off-by: Pawel Laszczak <pawell@cadence.com> Tested-by: Aswath Govindraju <a-govindraju@ti.com> Signed-off-by: Peter Chen <peter.chen@nxp.com>
2020-12-07 18:32:21 +08:00
#define CDNS_XHCI_RESOURCES_NUM 2
usb: cdns3: add runtime PM support Introduce runtime PM and wakeup interrupt handler for cdns3, the runtime PM is default off since other cdns3 may not implement glue layer support for runtime PM. One typical wakeup event use case is xHCI runtime suspend will clear USBCMD.RS bit, after that the xHCI will not trigger any interrupts, so its parent (cdns core device) needs to resume xHCI device when any (wakeup) events occurs at host port. When the controller is in low power mode, the lpm flag will be set. The interrupt triggered later than lpm flag is set considers as wakeup interrupt and handled at cdns_wakeup_irq. Once the wakeup occurs, it first disables interrupt to avoid later interrupt occurrence since the controller is in low power mode at that time, and access registers may be invalid at that time. At wakeup handler, it will call pm_request_resume to wakeup xHCI device, and at runtime resume handler, it will enable interrupt again. The API platform_suspend is introduced for glue layer to implement platform specific PM sequence. Reviewed-by: Pawel Laszczak <pawell@cadence.com> Signed-off-by: Peter Chen <peter.chen@nxp.com> Signed-off-by: Felipe Balbi <balbi@kernel.org>
2020-09-02 17:57:32 +08:00
struct cdns3_platform_data {
int (*platform_suspend)(struct device *dev,
bool suspend, bool wakeup);
usb: cdns3: add quirk for enable runtime pm by default Some vendors (eg: NXP) may want to enable runtime pm by default for power saving, add one quirk for it. Reviewed-by: Jun Li <jun.li@nxp.com> Signed-off-by: Peter Chen <peter.chen@nxp.com>
2020-09-28 15:20:03 +08:00
unsigned long quirks;
#define CDNS3_DEFAULT_PM_RUNTIME_ALLOW BIT(0)
usb: cdns3: add runtime PM support Introduce runtime PM and wakeup interrupt handler for cdns3, the runtime PM is default off since other cdns3 may not implement glue layer support for runtime PM. One typical wakeup event use case is xHCI runtime suspend will clear USBCMD.RS bit, after that the xHCI will not trigger any interrupts, so its parent (cdns core device) needs to resume xHCI device when any (wakeup) events occurs at host port. When the controller is in low power mode, the lpm flag will be set. The interrupt triggered later than lpm flag is set considers as wakeup interrupt and handled at cdns_wakeup_irq. Once the wakeup occurs, it first disables interrupt to avoid later interrupt occurrence since the controller is in low power mode at that time, and access registers may be invalid at that time. At wakeup handler, it will call pm_request_resume to wakeup xHCI device, and at runtime resume handler, it will enable interrupt again. The API platform_suspend is introduced for glue layer to implement platform specific PM sequence. Reviewed-by: Pawel Laszczak <pawell@cadence.com> Signed-off-by: Peter Chen <peter.chen@nxp.com> Signed-off-by: Felipe Balbi <balbi@kernel.org>
2020-09-02 17:57:32 +08:00
};
usb: cdns3: Add Cadence USB3 DRD Driver This patch introduce new Cadence USBSS DRD driver to Linux kernel. The Cadence USBSS DRD Controller is a highly configurable IP Core which can be instantiated as Dual-Role Device (DRD), Peripheral Only and Host Only (XHCI)configurations. The current driver has been validated with FPGA platform. We have support for PCIe bus, which is used on FPGA prototyping. The host side of USBSS-DRD controller is compliant with XHCI specification, so it works with standard XHCI Linux driver. Signed-off-by: Pawel Laszczak <pawell@cadence.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2019-08-26 19:19:30 +08:00
/**
usb: cdns3: Refactoring names in reusable code Patch change the functions and objects names in reusable code. The reusable code includes core.c, core.h, drd.c and drd.h files. It also changes the names of all references to these functions and objects in other cdns3 files. There are a lot of changes, but all changes are very trivial. The reason of this patch is to avoid of mixing prefix cdns3 and cdnsp in in cdnsp driver what could introduce some confusion in understanding of cdnsp driver. This patch assumes to use three different prefixes in Cadence USB drivers: cdns: for common reusable code cdnsp: for names related only with cdnsp driver cdns3: for names related only with cdns3 driver Signed-off-by: Pawel Laszczak <pawell@cadence.com> Tested-by: Aswath Govindraju <a-govindraju@ti.com> Signed-off-by: Peter Chen <peter.chen@nxp.com>
2020-12-07 18:32:21 +08:00
* struct cdns - Representation of Cadence USB3 DRD controller.
usb: cdns3: Add Cadence USB3 DRD Driver This patch introduce new Cadence USBSS DRD driver to Linux kernel. The Cadence USBSS DRD Controller is a highly configurable IP Core which can be instantiated as Dual-Role Device (DRD), Peripheral Only and Host Only (XHCI)configurations. The current driver has been validated with FPGA platform. We have support for PCIe bus, which is used on FPGA prototyping. The host side of USBSS-DRD controller is compliant with XHCI specification, so it works with standard XHCI Linux driver. Signed-off-by: Pawel Laszczak <pawell@cadence.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2019-08-26 19:19:30 +08:00
* @dev: pointer to Cadence device struct
* @xhci_regs: pointer to base of xhci registers
* @xhci_res: the resource for xhci
* @dev_regs: pointer to base of dev registers
* @otg_res: the resource for otg
* @otg_v0_regs: pointer to base of v0 otg registers
* @otg_v1_regs: pointer to base of v1 otg registers
usb: cdns3: Add support for DRD CDNSP Patch adds support for Cadence DRD Super Speed Plus controller(CDNSP). CDNSP DRD is a part of Cadence CDNSP controller. The DRD CDNSP controller has a lot of difference on hardware level but on software level is quite compatible with CDNS3 DRD. For this reason CDNS3 DRD part of CDNS3 driver was reused for CDNSP driver. Signed-off-by: Pawel Laszczak <pawell@cadence.com> Tested-by: Aswath Govindraju <a-govindraju@ti.com> Signed-off-by: Peter Chen <peter.chen@nxp.com>
2020-12-07 18:32:18 +08:00
* @otg_cdnsp_regs: pointer to base of CDNSP otg registers
usb: cdns3: Add Cadence USB3 DRD Driver This patch introduce new Cadence USBSS DRD driver to Linux kernel. The Cadence USBSS DRD Controller is a highly configurable IP Core which can be instantiated as Dual-Role Device (DRD), Peripheral Only and Host Only (XHCI)configurations. The current driver has been validated with FPGA platform. We have support for PCIe bus, which is used on FPGA prototyping. The host side of USBSS-DRD controller is compliant with XHCI specification, so it works with standard XHCI Linux driver. Signed-off-by: Pawel Laszczak <pawell@cadence.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2019-08-26 19:19:30 +08:00
* @otg_regs: pointer to base of otg registers
usb: cdns3: Add support for DRD CDNSP Patch adds support for Cadence DRD Super Speed Plus controller(CDNSP). CDNSP DRD is a part of Cadence CDNSP controller. The DRD CDNSP controller has a lot of difference on hardware level but on software level is quite compatible with CDNS3 DRD. For this reason CDNS3 DRD part of CDNS3 driver was reused for CDNSP driver. Signed-off-by: Pawel Laszczak <pawell@cadence.com> Tested-by: Aswath Govindraju <a-govindraju@ti.com> Signed-off-by: Peter Chen <peter.chen@nxp.com>
2020-12-07 18:32:18 +08:00
* @otg_irq_regs: pointer to interrupt registers
usb: cdns3: Add Cadence USB3 DRD Driver This patch introduce new Cadence USBSS DRD driver to Linux kernel. The Cadence USBSS DRD Controller is a highly configurable IP Core which can be instantiated as Dual-Role Device (DRD), Peripheral Only and Host Only (XHCI)configurations. The current driver has been validated with FPGA platform. We have support for PCIe bus, which is used on FPGA prototyping. The host side of USBSS-DRD controller is compliant with XHCI specification, so it works with standard XHCI Linux driver. Signed-off-by: Pawel Laszczak <pawell@cadence.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2019-08-26 19:19:30 +08:00
* @otg_irq: irq number for otg controller
* @dev_irq: irq number for device controller
usb: cdns3: add runtime PM support Introduce runtime PM and wakeup interrupt handler for cdns3, the runtime PM is default off since other cdns3 may not implement glue layer support for runtime PM. One typical wakeup event use case is xHCI runtime suspend will clear USBCMD.RS bit, after that the xHCI will not trigger any interrupts, so its parent (cdns core device) needs to resume xHCI device when any (wakeup) events occurs at host port. When the controller is in low power mode, the lpm flag will be set. The interrupt triggered later than lpm flag is set considers as wakeup interrupt and handled at cdns_wakeup_irq. Once the wakeup occurs, it first disables interrupt to avoid later interrupt occurrence since the controller is in low power mode at that time, and access registers may be invalid at that time. At wakeup handler, it will call pm_request_resume to wakeup xHCI device, and at runtime resume handler, it will enable interrupt again. The API platform_suspend is introduced for glue layer to implement platform specific PM sequence. Reviewed-by: Pawel Laszczak <pawell@cadence.com> Signed-off-by: Peter Chen <peter.chen@nxp.com> Signed-off-by: Felipe Balbi <balbi@kernel.org>
2020-09-02 17:57:32 +08:00
* @wakeup_irq: irq number for wakeup event, it is optional
usb: cdns3: Add Cadence USB3 DRD Driver This patch introduce new Cadence USBSS DRD driver to Linux kernel. The Cadence USBSS DRD Controller is a highly configurable IP Core which can be instantiated as Dual-Role Device (DRD), Peripheral Only and Host Only (XHCI)configurations. The current driver has been validated with FPGA platform. We have support for PCIe bus, which is used on FPGA prototyping. The host side of USBSS-DRD controller is compliant with XHCI specification, so it works with standard XHCI Linux driver. Signed-off-by: Pawel Laszczak <pawell@cadence.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2019-08-26 19:19:30 +08:00
* @roles: array of supported roles for this controller
* @role: current role
usb: cdns3: Refactoring names in reusable code Patch change the functions and objects names in reusable code. The reusable code includes core.c, core.h, drd.c and drd.h files. It also changes the names of all references to these functions and objects in other cdns3 files. There are a lot of changes, but all changes are very trivial. The reason of this patch is to avoid of mixing prefix cdns3 and cdnsp in in cdnsp driver what could introduce some confusion in understanding of cdnsp driver. This patch assumes to use three different prefixes in Cadence USB drivers: cdns: for common reusable code cdnsp: for names related only with cdnsp driver cdns3: for names related only with cdns3 driver Signed-off-by: Pawel Laszczak <pawell@cadence.com> Tested-by: Aswath Govindraju <a-govindraju@ti.com> Signed-off-by: Peter Chen <peter.chen@nxp.com>
2020-12-07 18:32:21 +08:00
* @host_dev: the child host device pointer for cdns core
usb: cdns3: Changed type of gadget_dev in cdns structure Patch changes the type for gadget_dev pointer in cdns structure from pointer to cdns3_device structure to void pointer. This filed is in reusable code and after this change it will be used to point to both cdns3_device or cdnsp_device objects. Signed-off-by: Pawel Laszczak <pawell@cadence.com> Tested-by: Aswath Govindraju <a-govindraju@ti.com> Signed-off-by: Peter Chen <peter.chen@nxp.com>
2020-12-07 18:32:22 +08:00
* @gadget_dev: the child gadget device pointer
usb: cdns3: Add Cadence USB3 DRD Driver This patch introduce new Cadence USBSS DRD driver to Linux kernel. The Cadence USBSS DRD Controller is a highly configurable IP Core which can be instantiated as Dual-Role Device (DRD), Peripheral Only and Host Only (XHCI)configurations. The current driver has been validated with FPGA platform. We have support for PCIe bus, which is used on FPGA prototyping. The host side of USBSS-DRD controller is compliant with XHCI specification, so it works with standard XHCI Linux driver. Signed-off-by: Pawel Laszczak <pawell@cadence.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2019-08-26 19:19:30 +08:00
* @usb2_phy: pointer to USB2 PHY
* @usb3_phy: pointer to USB3 PHY
* @mutex: the mutex for concurrent code at driver
* @dr_mode: supported mode of operation it can be only Host, only Device
* or OTG mode that allow to switch between Device and Host mode.
* This field based on firmware setting, kernel configuration
* and hardware configuration.
* @role_sw: pointer to role switch object.
usb: cdns3: add runtime PM support Introduce runtime PM and wakeup interrupt handler for cdns3, the runtime PM is default off since other cdns3 may not implement glue layer support for runtime PM. One typical wakeup event use case is xHCI runtime suspend will clear USBCMD.RS bit, after that the xHCI will not trigger any interrupts, so its parent (cdns core device) needs to resume xHCI device when any (wakeup) events occurs at host port. When the controller is in low power mode, the lpm flag will be set. The interrupt triggered later than lpm flag is set considers as wakeup interrupt and handled at cdns_wakeup_irq. Once the wakeup occurs, it first disables interrupt to avoid later interrupt occurrence since the controller is in low power mode at that time, and access registers may be invalid at that time. At wakeup handler, it will call pm_request_resume to wakeup xHCI device, and at runtime resume handler, it will enable interrupt again. The API platform_suspend is introduced for glue layer to implement platform specific PM sequence. Reviewed-by: Pawel Laszczak <pawell@cadence.com> Signed-off-by: Peter Chen <peter.chen@nxp.com> Signed-off-by: Felipe Balbi <balbi@kernel.org>
2020-09-02 17:57:32 +08:00
* @in_lpm: indicate the controller is in low power mode
* @wakeup_pending: wakeup interrupt pending
* @pdata: platform data from glue layer
* @lock: spinlock structure
usb: cdns3: add quirk for enable runtime pm by default Some vendors (eg: NXP) may want to enable runtime pm by default for power saving, add one quirk for it. Reviewed-by: Jun Li <jun.li@nxp.com> Signed-off-by: Peter Chen <peter.chen@nxp.com>
2020-09-28 15:20:03 +08:00
* @xhci_plat_data: xhci private data structure pointer
usb: cdns3: Moves reusable code to separate module Patch moves common reusable code used by cdns3 and cdnsp driver to cdns-usb-common library. This library include core.c, drd.c and host.c files. Signed-off-by: Pawel Laszczak <pawell@cadence.com> Tested-by: Aswath Govindraju <a-govindraju@ti.com> Signed-off-by: Peter Chen <peter.chen@nxp.com>
2020-12-07 18:32:20 +08:00
* @gadget_init: pointer to gadget initialization function
usb: cdns3: Add Cadence USB3 DRD Driver This patch introduce new Cadence USBSS DRD driver to Linux kernel. The Cadence USBSS DRD Controller is a highly configurable IP Core which can be instantiated as Dual-Role Device (DRD), Peripheral Only and Host Only (XHCI)configurations. The current driver has been validated with FPGA platform. We have support for PCIe bus, which is used on FPGA prototyping. The host side of USBSS-DRD controller is compliant with XHCI specification, so it works with standard XHCI Linux driver. Signed-off-by: Pawel Laszczak <pawell@cadence.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2019-08-26 19:19:30 +08:00
*/
usb: cdns3: Refactoring names in reusable code Patch change the functions and objects names in reusable code. The reusable code includes core.c, core.h, drd.c and drd.h files. It also changes the names of all references to these functions and objects in other cdns3 files. There are a lot of changes, but all changes are very trivial. The reason of this patch is to avoid of mixing prefix cdns3 and cdnsp in in cdnsp driver what could introduce some confusion in understanding of cdnsp driver. This patch assumes to use three different prefixes in Cadence USB drivers: cdns: for common reusable code cdnsp: for names related only with cdnsp driver cdns3: for names related only with cdns3 driver Signed-off-by: Pawel Laszczak <pawell@cadence.com> Tested-by: Aswath Govindraju <a-govindraju@ti.com> Signed-off-by: Peter Chen <peter.chen@nxp.com>
2020-12-07 18:32:21 +08:00
struct cdns {
usb: cdns3: Add Cadence USB3 DRD Driver This patch introduce new Cadence USBSS DRD driver to Linux kernel. The Cadence USBSS DRD Controller is a highly configurable IP Core which can be instantiated as Dual-Role Device (DRD), Peripheral Only and Host Only (XHCI)configurations. The current driver has been validated with FPGA platform. We have support for PCIe bus, which is used on FPGA prototyping. The host side of USBSS-DRD controller is compliant with XHCI specification, so it works with standard XHCI Linux driver. Signed-off-by: Pawel Laszczak <pawell@cadence.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2019-08-26 19:19:30 +08:00
struct device *dev;
void __iomem *xhci_regs;
usb: cdns3: Refactoring names in reusable code Patch change the functions and objects names in reusable code. The reusable code includes core.c, core.h, drd.c and drd.h files. It also changes the names of all references to these functions and objects in other cdns3 files. There are a lot of changes, but all changes are very trivial. The reason of this patch is to avoid of mixing prefix cdns3 and cdnsp in in cdnsp driver what could introduce some confusion in understanding of cdnsp driver. This patch assumes to use three different prefixes in Cadence USB drivers: cdns: for common reusable code cdnsp: for names related only with cdnsp driver cdns3: for names related only with cdns3 driver Signed-off-by: Pawel Laszczak <pawell@cadence.com> Tested-by: Aswath Govindraju <a-govindraju@ti.com> Signed-off-by: Peter Chen <peter.chen@nxp.com>
2020-12-07 18:32:21 +08:00
struct resource xhci_res[CDNS_XHCI_RESOURCES_NUM];
usb: cdns3: Add Cadence USB3 DRD Driver This patch introduce new Cadence USBSS DRD driver to Linux kernel. The Cadence USBSS DRD Controller is a highly configurable IP Core which can be instantiated as Dual-Role Device (DRD), Peripheral Only and Host Only (XHCI)configurations. The current driver has been validated with FPGA platform. We have support for PCIe bus, which is used on FPGA prototyping. The host side of USBSS-DRD controller is compliant with XHCI specification, so it works with standard XHCI Linux driver. Signed-off-by: Pawel Laszczak <pawell@cadence.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2019-08-26 19:19:30 +08:00
struct cdns3_usb_regs __iomem *dev_regs;
usb: cdns3: Adds missing __iomem markers Patch adds missing __iomem markers in core.h file and makes some changes in drd.c file related with these markers. The lack of __iomem has reported by sparse checker on parsic architecture. Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Pawel Laszczak <pawell@cadence.com> Signed-off-by: Peter Chen <peter.chen@kernel.org>
2020-12-15 18:27:09 +08:00
struct resource otg_res;
struct cdns3_otg_legacy_regs __iomem *otg_v0_regs;
struct cdns3_otg_regs __iomem *otg_v1_regs;
struct cdnsp_otg_regs __iomem *otg_cdnsp_regs;
struct cdns_otg_common_regs __iomem *otg_regs;
struct cdns_otg_irq_regs __iomem *otg_irq_regs;
usb: cdns3: Add Cadence USB3 DRD Driver This patch introduce new Cadence USBSS DRD driver to Linux kernel. The Cadence USBSS DRD Controller is a highly configurable IP Core which can be instantiated as Dual-Role Device (DRD), Peripheral Only and Host Only (XHCI)configurations. The current driver has been validated with FPGA platform. We have support for PCIe bus, which is used on FPGA prototyping. The host side of USBSS-DRD controller is compliant with XHCI specification, so it works with standard XHCI Linux driver. Signed-off-by: Pawel Laszczak <pawell@cadence.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2019-08-26 19:19:30 +08:00
#define CDNS3_CONTROLLER_V0 0
#define CDNS3_CONTROLLER_V1 1
usb: cdns3: Add support for DRD CDNSP Patch adds support for Cadence DRD Super Speed Plus controller(CDNSP). CDNSP DRD is a part of Cadence CDNSP controller. The DRD CDNSP controller has a lot of difference on hardware level but on software level is quite compatible with CDNS3 DRD. For this reason CDNS3 DRD part of CDNS3 driver was reused for CDNSP driver. Signed-off-by: Pawel Laszczak <pawell@cadence.com> Tested-by: Aswath Govindraju <a-govindraju@ti.com> Signed-off-by: Peter Chen <peter.chen@nxp.com>
2020-12-07 18:32:18 +08:00
#define CDNSP_CONTROLLER_V2 2
usb: cdns3: Add Cadence USB3 DRD Driver This patch introduce new Cadence USBSS DRD driver to Linux kernel. The Cadence USBSS DRD Controller is a highly configurable IP Core which can be instantiated as Dual-Role Device (DRD), Peripheral Only and Host Only (XHCI)configurations. The current driver has been validated with FPGA platform. We have support for PCIe bus, which is used on FPGA prototyping. The host side of USBSS-DRD controller is compliant with XHCI specification, so it works with standard XHCI Linux driver. Signed-off-by: Pawel Laszczak <pawell@cadence.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2019-08-26 19:19:30 +08:00
u32 version;
usb: cdns3: Enable workaround for USB2.0 PHY Rx compliance test PHY lockup USB2.0 PHY hangs in Rx Compliance test when the incoming packet amplitude is varied below and above the Squelch Level of Receiver during the active packet multiple times. Version 1 of the controller allows PHY to be reset when RX fail condition is detected to work around the above issue. This feature is disabled by default and needs to be enabled using a bit from the newly added PHYRST_CFG register. This patch enables the workaround. There is no way to know controller version before device controller is started and the workaround needs to be applied for both host and device modes, so we rely on a DT property do decide when to apply the workaround. Signed-off-by: Pawel Laszczak <pawell@cadence.com> Signed-off-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Felipe Balbi <balbi@kernel.org>
2020-09-15 19:45:43 +08:00
bool phyrst_a_enable;
usb: cdns3: Add Cadence USB3 DRD Driver This patch introduce new Cadence USBSS DRD driver to Linux kernel. The Cadence USBSS DRD Controller is a highly configurable IP Core which can be instantiated as Dual-Role Device (DRD), Peripheral Only and Host Only (XHCI)configurations. The current driver has been validated with FPGA platform. We have support for PCIe bus, which is used on FPGA prototyping. The host side of USBSS-DRD controller is compliant with XHCI specification, so it works with standard XHCI Linux driver. Signed-off-by: Pawel Laszczak <pawell@cadence.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2019-08-26 19:19:30 +08:00
int otg_irq;
int dev_irq;
usb: cdns3: add runtime PM support Introduce runtime PM and wakeup interrupt handler for cdns3, the runtime PM is default off since other cdns3 may not implement glue layer support for runtime PM. One typical wakeup event use case is xHCI runtime suspend will clear USBCMD.RS bit, after that the xHCI will not trigger any interrupts, so its parent (cdns core device) needs to resume xHCI device when any (wakeup) events occurs at host port. When the controller is in low power mode, the lpm flag will be set. The interrupt triggered later than lpm flag is set considers as wakeup interrupt and handled at cdns_wakeup_irq. Once the wakeup occurs, it first disables interrupt to avoid later interrupt occurrence since the controller is in low power mode at that time, and access registers may be invalid at that time. At wakeup handler, it will call pm_request_resume to wakeup xHCI device, and at runtime resume handler, it will enable interrupt again. The API platform_suspend is introduced for glue layer to implement platform specific PM sequence. Reviewed-by: Pawel Laszczak <pawell@cadence.com> Signed-off-by: Peter Chen <peter.chen@nxp.com> Signed-off-by: Felipe Balbi <balbi@kernel.org>
2020-09-02 17:57:32 +08:00
int wakeup_irq;
usb: cdns3: Refactoring names in reusable code Patch change the functions and objects names in reusable code. The reusable code includes core.c, core.h, drd.c and drd.h files. It also changes the names of all references to these functions and objects in other cdns3 files. There are a lot of changes, but all changes are very trivial. The reason of this patch is to avoid of mixing prefix cdns3 and cdnsp in in cdnsp driver what could introduce some confusion in understanding of cdnsp driver. This patch assumes to use three different prefixes in Cadence USB drivers: cdns: for common reusable code cdnsp: for names related only with cdnsp driver cdns3: for names related only with cdns3 driver Signed-off-by: Pawel Laszczak <pawell@cadence.com> Tested-by: Aswath Govindraju <a-govindraju@ti.com> Signed-off-by: Peter Chen <peter.chen@nxp.com>
2020-12-07 18:32:21 +08:00
struct cdns_role_driver *roles[USB_ROLE_DEVICE + 1];
usb: cdns3: Add Cadence USB3 DRD Driver This patch introduce new Cadence USBSS DRD driver to Linux kernel. The Cadence USBSS DRD Controller is a highly configurable IP Core which can be instantiated as Dual-Role Device (DRD), Peripheral Only and Host Only (XHCI)configurations. The current driver has been validated with FPGA platform. We have support for PCIe bus, which is used on FPGA prototyping. The host side of USBSS-DRD controller is compliant with XHCI specification, so it works with standard XHCI Linux driver. Signed-off-by: Pawel Laszczak <pawell@cadence.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2019-08-26 19:19:30 +08:00
enum usb_role role;
struct platform_device *host_dev;
usb: cdns3: Changed type of gadget_dev in cdns structure Patch changes the type for gadget_dev pointer in cdns structure from pointer to cdns3_device structure to void pointer. This filed is in reusable code and after this change it will be used to point to both cdns3_device or cdnsp_device objects. Signed-off-by: Pawel Laszczak <pawell@cadence.com> Tested-by: Aswath Govindraju <a-govindraju@ti.com> Signed-off-by: Peter Chen <peter.chen@nxp.com>
2020-12-07 18:32:22 +08:00
void *gadget_dev;
usb: cdns3: Add Cadence USB3 DRD Driver This patch introduce new Cadence USBSS DRD driver to Linux kernel. The Cadence USBSS DRD Controller is a highly configurable IP Core which can be instantiated as Dual-Role Device (DRD), Peripheral Only and Host Only (XHCI)configurations. The current driver has been validated with FPGA platform. We have support for PCIe bus, which is used on FPGA prototyping. The host side of USBSS-DRD controller is compliant with XHCI specification, so it works with standard XHCI Linux driver. Signed-off-by: Pawel Laszczak <pawell@cadence.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2019-08-26 19:19:30 +08:00
struct phy *usb2_phy;
struct phy *usb3_phy;
/* mutext used in workqueue*/
struct mutex mutex;
enum usb_dr_mode dr_mode;
struct usb_role_switch *role_sw;
usb: cdns3: add runtime PM support Introduce runtime PM and wakeup interrupt handler for cdns3, the runtime PM is default off since other cdns3 may not implement glue layer support for runtime PM. One typical wakeup event use case is xHCI runtime suspend will clear USBCMD.RS bit, after that the xHCI will not trigger any interrupts, so its parent (cdns core device) needs to resume xHCI device when any (wakeup) events occurs at host port. When the controller is in low power mode, the lpm flag will be set. The interrupt triggered later than lpm flag is set considers as wakeup interrupt and handled at cdns_wakeup_irq. Once the wakeup occurs, it first disables interrupt to avoid later interrupt occurrence since the controller is in low power mode at that time, and access registers may be invalid at that time. At wakeup handler, it will call pm_request_resume to wakeup xHCI device, and at runtime resume handler, it will enable interrupt again. The API platform_suspend is introduced for glue layer to implement platform specific PM sequence. Reviewed-by: Pawel Laszczak <pawell@cadence.com> Signed-off-by: Peter Chen <peter.chen@nxp.com> Signed-off-by: Felipe Balbi <balbi@kernel.org>
2020-09-02 17:57:32 +08:00
bool in_lpm;
bool wakeup_pending;
struct cdns3_platform_data *pdata;
spinlock_t lock;
usb: cdns3: add quirk for enable runtime pm by default Some vendors (eg: NXP) may want to enable runtime pm by default for power saving, add one quirk for it. Reviewed-by: Jun Li <jun.li@nxp.com> Signed-off-by: Peter Chen <peter.chen@nxp.com>
2020-09-28 15:20:03 +08:00
struct xhci_plat_priv *xhci_plat_data;
usb: cdns3: Moves reusable code to separate module Patch moves common reusable code used by cdns3 and cdnsp driver to cdns-usb-common library. This library include core.c, drd.c and host.c files. Signed-off-by: Pawel Laszczak <pawell@cadence.com> Tested-by: Aswath Govindraju <a-govindraju@ti.com> Signed-off-by: Peter Chen <peter.chen@nxp.com>
2020-12-07 18:32:20 +08:00
usb: cdns3: Refactoring names in reusable code Patch change the functions and objects names in reusable code. The reusable code includes core.c, core.h, drd.c and drd.h files. It also changes the names of all references to these functions and objects in other cdns3 files. There are a lot of changes, but all changes are very trivial. The reason of this patch is to avoid of mixing prefix cdns3 and cdnsp in in cdnsp driver what could introduce some confusion in understanding of cdnsp driver. This patch assumes to use three different prefixes in Cadence USB drivers: cdns: for common reusable code cdnsp: for names related only with cdnsp driver cdns3: for names related only with cdns3 driver Signed-off-by: Pawel Laszczak <pawell@cadence.com> Tested-by: Aswath Govindraju <a-govindraju@ti.com> Signed-off-by: Peter Chen <peter.chen@nxp.com>
2020-12-07 18:32:21 +08:00
int (*gadget_init)(struct cdns *cdns);
usb: cdns3: Add Cadence USB3 DRD Driver This patch introduce new Cadence USBSS DRD driver to Linux kernel. The Cadence USBSS DRD Controller is a highly configurable IP Core which can be instantiated as Dual-Role Device (DRD), Peripheral Only and Host Only (XHCI)configurations. The current driver has been validated with FPGA platform. We have support for PCIe bus, which is used on FPGA prototyping. The host side of USBSS-DRD controller is compliant with XHCI specification, so it works with standard XHCI Linux driver. Signed-off-by: Pawel Laszczak <pawell@cadence.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2019-08-26 19:19:30 +08:00
};
usb: cdns3: Refactoring names in reusable code Patch change the functions and objects names in reusable code. The reusable code includes core.c, core.h, drd.c and drd.h files. It also changes the names of all references to these functions and objects in other cdns3 files. There are a lot of changes, but all changes are very trivial. The reason of this patch is to avoid of mixing prefix cdns3 and cdnsp in in cdnsp driver what could introduce some confusion in understanding of cdnsp driver. This patch assumes to use three different prefixes in Cadence USB drivers: cdns: for common reusable code cdnsp: for names related only with cdnsp driver cdns3: for names related only with cdns3 driver Signed-off-by: Pawel Laszczak <pawell@cadence.com> Tested-by: Aswath Govindraju <a-govindraju@ti.com> Signed-off-by: Peter Chen <peter.chen@nxp.com>
2020-12-07 18:32:21 +08:00
int cdns_hw_role_switch(struct cdns *cdns);
int cdns_init(struct cdns *cdns);
int cdns_remove(struct cdns *cdns);
usb: cdns3: Add Cadence USB3 DRD Driver This patch introduce new Cadence USBSS DRD driver to Linux kernel. The Cadence USBSS DRD Controller is a highly configurable IP Core which can be instantiated as Dual-Role Device (DRD), Peripheral Only and Host Only (XHCI)configurations. The current driver has been validated with FPGA platform. We have support for PCIe bus, which is used on FPGA prototyping. The host side of USBSS-DRD controller is compliant with XHCI specification, so it works with standard XHCI Linux driver. Signed-off-by: Pawel Laszczak <pawell@cadence.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2019-08-26 19:19:30 +08:00
usb: cdns3: Split core.c into cdns3-plat and core.c file Patch splits file core.c into core.c containing the common reusable code and cnd3-plat.c containing device platform specific code. These changes are required to make possible reuse DRD part of CDNS3 driver in CDNSP driver. Signed-off-by: Pawel Laszczak <pawell@cadence.com> Tested-by: Aswath Govindraju <a-govindraju@ti.com> Signed-off-by: Peter Chen <peter.chen@nxp.com>
2020-12-07 18:32:19 +08:00
#ifdef CONFIG_PM_SLEEP
usb: cdns3: Refactoring names in reusable code Patch change the functions and objects names in reusable code. The reusable code includes core.c, core.h, drd.c and drd.h files. It also changes the names of all references to these functions and objects in other cdns3 files. There are a lot of changes, but all changes are very trivial. The reason of this patch is to avoid of mixing prefix cdns3 and cdnsp in in cdnsp driver what could introduce some confusion in understanding of cdnsp driver. This patch assumes to use three different prefixes in Cadence USB drivers: cdns: for common reusable code cdnsp: for names related only with cdnsp driver cdns3: for names related only with cdns3 driver Signed-off-by: Pawel Laszczak <pawell@cadence.com> Tested-by: Aswath Govindraju <a-govindraju@ti.com> Signed-off-by: Peter Chen <peter.chen@nxp.com>
2020-12-07 18:32:21 +08:00
int cdns_resume(struct cdns *cdns, u8 set_active);
int cdns_suspend(struct cdns *cdns);
usb: cdns3: fix build when PM_SLEEP is not set Fix build error when CONFIG_PM_SLEEP is not enabled by adding stubs for the PM_SLEEP functions. ../drivers/usb/cdns3/cdns3-plat.c: In function ‘cdns3_controller_resume’: ../drivers/usb/cdns3/cdns3-plat.c:246:2: error: implicit declaration of function ‘cdns_resume’; did you mean ‘cdns_remove’? [-Werror=implicit-function-declaration] cdns_resume(cdns, !PMSG_IS_AUTO(msg)); ^~~~~~~~~~~ Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Peter Chen <peter.chen@nxp.com> Cc: Pawel Laszczak <pawell@cadence.com> Cc: Roger Quadros <rogerq@ti.com> Cc: linux-usb@vger.kernel.org Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Peter Chen <peter.chen@nxp.com>
2020-12-09 03:55:35 +08:00
#else /* CONFIG_PM_SLEEP */
static inline int cdns_resume(struct cdns *cdns, u8 set_active)
{ return 0; }
static inline int cdns_suspend(struct cdns *cdns)
{ return 0; }
usb: cdns3: Split core.c into cdns3-plat and core.c file Patch splits file core.c into core.c containing the common reusable code and cnd3-plat.c containing device platform specific code. These changes are required to make possible reuse DRD part of CDNS3 driver in CDNSP driver. Signed-off-by: Pawel Laszczak <pawell@cadence.com> Tested-by: Aswath Govindraju <a-govindraju@ti.com> Signed-off-by: Peter Chen <peter.chen@nxp.com>
2020-12-07 18:32:19 +08:00
#endif /* CONFIG_PM_SLEEP */
usb: cdns3: Add Cadence USB3 DRD Driver This patch introduce new Cadence USBSS DRD driver to Linux kernel. The Cadence USBSS DRD Controller is a highly configurable IP Core which can be instantiated as Dual-Role Device (DRD), Peripheral Only and Host Only (XHCI)configurations. The current driver has been validated with FPGA platform. We have support for PCIe bus, which is used on FPGA prototyping. The host side of USBSS-DRD controller is compliant with XHCI specification, so it works with standard XHCI Linux driver. Signed-off-by: Pawel Laszczak <pawell@cadence.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2019-08-26 19:19:30 +08:00
#endif /* __LINUX_CDNS3_CORE_H */