2019-10-28 23:32:23 +08:00
|
|
|
// SPDX-License-Identifier: GPL-2.0
|
|
|
|
/*
|
|
|
|
* PM domains for CPUs via genpd - managed by cpuidle-psci.
|
|
|
|
*
|
|
|
|
* Copyright (C) 2019 Linaro Ltd.
|
|
|
|
* Author: Ulf Hansson <ulf.hansson@linaro.org>
|
|
|
|
*
|
|
|
|
*/
|
|
|
|
|
cpuidle: psci: Add support for PM domains by using genpd
When the hierarchical CPU topology layout is used in DT and the PSCI OSI
mode is supported by the PSCI FW, let's initialize a corresponding PM
domain topology by using genpd. This enables a CPU and a group of CPUs,
when attached to the topology, to be power-managed accordingly.
To trigger the attempt to initialize the genpd data structures let's use a
subsys_initcall, which should be early enough to allow CPUs, but also other
devices to be attached.
The initialization consists of parsing the PSCI OF node for the topology
and the "domain idle states" DT bindings. In case the idle states are
compatible with "domain-idle-state", the initialized genpd becomes
responsible of selecting an idle state for the PM domain, via assigning it
a genpd governor.
Note that, a successful initialization of the genpd data structures, is
followed by a call to psci_set_osi_mode(), as to try to enable the OSI mode
in the PSCI FW. In case this fails, we fall back into a degraded mode
rather than bailing out and returning error codes.
Co-developed-by: Lina Iyer <lina.iyer@linaro.org>
Signed-off-by: Lina Iyer <lina.iyer@linaro.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Rafael J. Wysocki <rafael@kernel.org>
2019-10-10 18:01:48 +08:00
|
|
|
#define pr_fmt(fmt) "CPUidle PSCI: " fmt
|
|
|
|
|
2019-10-28 23:32:23 +08:00
|
|
|
#include <linux/cpu.h>
|
|
|
|
#include <linux/device.h>
|
|
|
|
#include <linux/kernel.h>
|
2020-07-07 20:58:03 +08:00
|
|
|
#include <linux/platform_device.h>
|
2019-10-28 23:32:23 +08:00
|
|
|
#include <linux/pm_domain.h>
|
|
|
|
#include <linux/pm_runtime.h>
|
cpuidle: psci: Add support for PM domains by using genpd
When the hierarchical CPU topology layout is used in DT and the PSCI OSI
mode is supported by the PSCI FW, let's initialize a corresponding PM
domain topology by using genpd. This enables a CPU and a group of CPUs,
when attached to the topology, to be power-managed accordingly.
To trigger the attempt to initialize the genpd data structures let's use a
subsys_initcall, which should be early enough to allow CPUs, but also other
devices to be attached.
The initialization consists of parsing the PSCI OF node for the topology
and the "domain idle states" DT bindings. In case the idle states are
compatible with "domain-idle-state", the initialized genpd becomes
responsible of selecting an idle state for the PM domain, via assigning it
a genpd governor.
Note that, a successful initialization of the genpd data structures, is
followed by a call to psci_set_osi_mode(), as to try to enable the OSI mode
in the PSCI FW. In case this fails, we fall back into a degraded mode
rather than bailing out and returning error codes.
Co-developed-by: Lina Iyer <lina.iyer@linaro.org>
Signed-off-by: Lina Iyer <lina.iyer@linaro.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Rafael J. Wysocki <rafael@kernel.org>
2019-10-10 18:01:48 +08:00
|
|
|
#include <linux/psci.h>
|
|
|
|
#include <linux/slab.h>
|
|
|
|
#include <linux/string.h>
|
2019-10-28 23:32:23 +08:00
|
|
|
|
|
|
|
#include "cpuidle-psci.h"
|
|
|
|
|
cpuidle: psci: Add support for PM domains by using genpd
When the hierarchical CPU topology layout is used in DT and the PSCI OSI
mode is supported by the PSCI FW, let's initialize a corresponding PM
domain topology by using genpd. This enables a CPU and a group of CPUs,
when attached to the topology, to be power-managed accordingly.
To trigger the attempt to initialize the genpd data structures let's use a
subsys_initcall, which should be early enough to allow CPUs, but also other
devices to be attached.
The initialization consists of parsing the PSCI OF node for the topology
and the "domain idle states" DT bindings. In case the idle states are
compatible with "domain-idle-state", the initialized genpd becomes
responsible of selecting an idle state for the PM domain, via assigning it
a genpd governor.
Note that, a successful initialization of the genpd data structures, is
followed by a call to psci_set_osi_mode(), as to try to enable the OSI mode
in the PSCI FW. In case this fails, we fall back into a degraded mode
rather than bailing out and returning error codes.
Co-developed-by: Lina Iyer <lina.iyer@linaro.org>
Signed-off-by: Lina Iyer <lina.iyer@linaro.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Rafael J. Wysocki <rafael@kernel.org>
2019-10-10 18:01:48 +08:00
|
|
|
struct psci_pd_provider {
|
|
|
|
struct list_head link;
|
|
|
|
struct device_node *node;
|
|
|
|
};
|
|
|
|
|
|
|
|
static LIST_HEAD(psci_pd_providers);
|
cpuidle: psci: Prevent domain idlestates until consumers are ready
Depending on the SoC/platform, additional devices may be part of the PSCI
PM domain topology. This is the case with 'qcom,rpmh-rsc' device, for
example, even if this is not yet visible in the corresponding DTS-files.
Without going into too much details, a device like the 'qcom,rpmh-rsc' may
have HW constraints that needs to be obeyed to, before a domain idlestate
can be picked.
Therefore, let's implement the ->sync_state() callback to receive a
notification when all consumers of the PSCI PM domain providers have been
attached/probed to it. In this way, we can make sure all constraints from
all relevant devices, are taken into account before allowing a domain
idlestate to be picked.
Acked-by: Saravana Kannan <saravanak@google.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-07-07 20:58:04 +08:00
|
|
|
static bool psci_pd_allow_domain_state;
|
cpuidle: psci: Add support for PM domains by using genpd
When the hierarchical CPU topology layout is used in DT and the PSCI OSI
mode is supported by the PSCI FW, let's initialize a corresponding PM
domain topology by using genpd. This enables a CPU and a group of CPUs,
when attached to the topology, to be power-managed accordingly.
To trigger the attempt to initialize the genpd data structures let's use a
subsys_initcall, which should be early enough to allow CPUs, but also other
devices to be attached.
The initialization consists of parsing the PSCI OF node for the topology
and the "domain idle states" DT bindings. In case the idle states are
compatible with "domain-idle-state", the initialized genpd becomes
responsible of selecting an idle state for the PM domain, via assigning it
a genpd governor.
Note that, a successful initialization of the genpd data structures, is
followed by a call to psci_set_osi_mode(), as to try to enable the OSI mode
in the PSCI FW. In case this fails, we fall back into a degraded mode
rather than bailing out and returning error codes.
Co-developed-by: Lina Iyer <lina.iyer@linaro.org>
Signed-off-by: Lina Iyer <lina.iyer@linaro.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Rafael J. Wysocki <rafael@kernel.org>
2019-10-10 18:01:48 +08:00
|
|
|
|
|
|
|
static int psci_pd_power_off(struct generic_pm_domain *pd)
|
|
|
|
{
|
|
|
|
struct genpd_power_state *state = &pd->states[pd->state_idx];
|
|
|
|
u32 *pd_state;
|
|
|
|
|
|
|
|
if (!state->data)
|
|
|
|
return 0;
|
|
|
|
|
cpuidle: psci: Prevent domain idlestates until consumers are ready
Depending on the SoC/platform, additional devices may be part of the PSCI
PM domain topology. This is the case with 'qcom,rpmh-rsc' device, for
example, even if this is not yet visible in the corresponding DTS-files.
Without going into too much details, a device like the 'qcom,rpmh-rsc' may
have HW constraints that needs to be obeyed to, before a domain idlestate
can be picked.
Therefore, let's implement the ->sync_state() callback to receive a
notification when all consumers of the PSCI PM domain providers have been
attached/probed to it. In this way, we can make sure all constraints from
all relevant devices, are taken into account before allowing a domain
idlestate to be picked.
Acked-by: Saravana Kannan <saravanak@google.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-07-07 20:58:04 +08:00
|
|
|
if (!psci_pd_allow_domain_state)
|
|
|
|
return -EBUSY;
|
|
|
|
|
cpuidle: psci: Add support for PM domains by using genpd
When the hierarchical CPU topology layout is used in DT and the PSCI OSI
mode is supported by the PSCI FW, let's initialize a corresponding PM
domain topology by using genpd. This enables a CPU and a group of CPUs,
when attached to the topology, to be power-managed accordingly.
To trigger the attempt to initialize the genpd data structures let's use a
subsys_initcall, which should be early enough to allow CPUs, but also other
devices to be attached.
The initialization consists of parsing the PSCI OF node for the topology
and the "domain idle states" DT bindings. In case the idle states are
compatible with "domain-idle-state", the initialized genpd becomes
responsible of selecting an idle state for the PM domain, via assigning it
a genpd governor.
Note that, a successful initialization of the genpd data structures, is
followed by a call to psci_set_osi_mode(), as to try to enable the OSI mode
in the PSCI FW. In case this fails, we fall back into a degraded mode
rather than bailing out and returning error codes.
Co-developed-by: Lina Iyer <lina.iyer@linaro.org>
Signed-off-by: Lina Iyer <lina.iyer@linaro.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Rafael J. Wysocki <rafael@kernel.org>
2019-10-10 18:01:48 +08:00
|
|
|
/* OSI mode is enabled, set the corresponding domain state. */
|
|
|
|
pd_state = state->data;
|
|
|
|
psci_set_domain_state(*pd_state);
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
2020-09-01 22:28:59 +08:00
|
|
|
static int psci_pd_init(struct device_node *np, bool use_osi)
|
cpuidle: psci: Add support for PM domains by using genpd
When the hierarchical CPU topology layout is used in DT and the PSCI OSI
mode is supported by the PSCI FW, let's initialize a corresponding PM
domain topology by using genpd. This enables a CPU and a group of CPUs,
when attached to the topology, to be power-managed accordingly.
To trigger the attempt to initialize the genpd data structures let's use a
subsys_initcall, which should be early enough to allow CPUs, but also other
devices to be attached.
The initialization consists of parsing the PSCI OF node for the topology
and the "domain idle states" DT bindings. In case the idle states are
compatible with "domain-idle-state", the initialized genpd becomes
responsible of selecting an idle state for the PM domain, via assigning it
a genpd governor.
Note that, a successful initialization of the genpd data structures, is
followed by a call to psci_set_osi_mode(), as to try to enable the OSI mode
in the PSCI FW. In case this fails, we fall back into a degraded mode
rather than bailing out and returning error codes.
Co-developed-by: Lina Iyer <lina.iyer@linaro.org>
Signed-off-by: Lina Iyer <lina.iyer@linaro.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Rafael J. Wysocki <rafael@kernel.org>
2019-10-10 18:01:48 +08:00
|
|
|
{
|
|
|
|
struct generic_pm_domain *pd;
|
|
|
|
struct psci_pd_provider *pd_provider;
|
|
|
|
struct dev_power_governor *pd_gov;
|
2022-05-14 23:20:32 +08:00
|
|
|
int ret = -ENOMEM;
|
cpuidle: psci: Add support for PM domains by using genpd
When the hierarchical CPU topology layout is used in DT and the PSCI OSI
mode is supported by the PSCI FW, let's initialize a corresponding PM
domain topology by using genpd. This enables a CPU and a group of CPUs,
when attached to the topology, to be power-managed accordingly.
To trigger the attempt to initialize the genpd data structures let's use a
subsys_initcall, which should be early enough to allow CPUs, but also other
devices to be attached.
The initialization consists of parsing the PSCI OF node for the topology
and the "domain idle states" DT bindings. In case the idle states are
compatible with "domain-idle-state", the initialized genpd becomes
responsible of selecting an idle state for the PM domain, via assigning it
a genpd governor.
Note that, a successful initialization of the genpd data structures, is
followed by a call to psci_set_osi_mode(), as to try to enable the OSI mode
in the PSCI FW. In case this fails, we fall back into a degraded mode
rather than bailing out and returning error codes.
Co-developed-by: Lina Iyer <lina.iyer@linaro.org>
Signed-off-by: Lina Iyer <lina.iyer@linaro.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Rafael J. Wysocki <rafael@kernel.org>
2019-10-10 18:01:48 +08:00
|
|
|
|
2022-02-10 13:49:44 +08:00
|
|
|
pd = dt_idle_pd_alloc(np, psci_dt_parse_state_node);
|
cpuidle: psci: Add support for PM domains by using genpd
When the hierarchical CPU topology layout is used in DT and the PSCI OSI
mode is supported by the PSCI FW, let's initialize a corresponding PM
domain topology by using genpd. This enables a CPU and a group of CPUs,
when attached to the topology, to be power-managed accordingly.
To trigger the attempt to initialize the genpd data structures let's use a
subsys_initcall, which should be early enough to allow CPUs, but also other
devices to be attached.
The initialization consists of parsing the PSCI OF node for the topology
and the "domain idle states" DT bindings. In case the idle states are
compatible with "domain-idle-state", the initialized genpd becomes
responsible of selecting an idle state for the PM domain, via assigning it
a genpd governor.
Note that, a successful initialization of the genpd data structures, is
followed by a call to psci_set_osi_mode(), as to try to enable the OSI mode
in the PSCI FW. In case this fails, we fall back into a degraded mode
rather than bailing out and returning error codes.
Co-developed-by: Lina Iyer <lina.iyer@linaro.org>
Signed-off-by: Lina Iyer <lina.iyer@linaro.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Rafael J. Wysocki <rafael@kernel.org>
2019-10-10 18:01:48 +08:00
|
|
|
if (!pd)
|
|
|
|
goto out;
|
|
|
|
|
|
|
|
pd_provider = kzalloc(sizeof(*pd_provider), GFP_KERNEL);
|
|
|
|
if (!pd_provider)
|
|
|
|
goto free_pd;
|
|
|
|
|
|
|
|
pd->flags |= GENPD_FLAG_IRQ_SAFE | GENPD_FLAG_CPU_DOMAIN;
|
|
|
|
|
2023-01-25 19:34:18 +08:00
|
|
|
/*
|
|
|
|
* Allow power off when OSI has been successfully enabled.
|
|
|
|
* PREEMPT_RT is not yet ready to enter domain idle states.
|
|
|
|
*/
|
|
|
|
if (use_osi && !IS_ENABLED(CONFIG_PREEMPT_RT))
|
2020-09-01 22:28:59 +08:00
|
|
|
pd->power_off = psci_pd_power_off;
|
|
|
|
else
|
|
|
|
pd->flags |= GENPD_FLAG_ALWAYS_ON;
|
|
|
|
|
cpuidle: psci: Add support for PM domains by using genpd
When the hierarchical CPU topology layout is used in DT and the PSCI OSI
mode is supported by the PSCI FW, let's initialize a corresponding PM
domain topology by using genpd. This enables a CPU and a group of CPUs,
when attached to the topology, to be power-managed accordingly.
To trigger the attempt to initialize the genpd data structures let's use a
subsys_initcall, which should be early enough to allow CPUs, but also other
devices to be attached.
The initialization consists of parsing the PSCI OF node for the topology
and the "domain idle states" DT bindings. In case the idle states are
compatible with "domain-idle-state", the initialized genpd becomes
responsible of selecting an idle state for the PM domain, via assigning it
a genpd governor.
Note that, a successful initialization of the genpd data structures, is
followed by a call to psci_set_osi_mode(), as to try to enable the OSI mode
in the PSCI FW. In case this fails, we fall back into a degraded mode
rather than bailing out and returning error codes.
Co-developed-by: Lina Iyer <lina.iyer@linaro.org>
Signed-off-by: Lina Iyer <lina.iyer@linaro.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Rafael J. Wysocki <rafael@kernel.org>
2019-10-10 18:01:48 +08:00
|
|
|
/* Use governor for CPU PM domains if it has some states to manage. */
|
2022-05-14 23:20:32 +08:00
|
|
|
pd_gov = pd->states ? &pm_domain_cpu_gov : NULL;
|
cpuidle: psci: Add support for PM domains by using genpd
When the hierarchical CPU topology layout is used in DT and the PSCI OSI
mode is supported by the PSCI FW, let's initialize a corresponding PM
domain topology by using genpd. This enables a CPU and a group of CPUs,
when attached to the topology, to be power-managed accordingly.
To trigger the attempt to initialize the genpd data structures let's use a
subsys_initcall, which should be early enough to allow CPUs, but also other
devices to be attached.
The initialization consists of parsing the PSCI OF node for the topology
and the "domain idle states" DT bindings. In case the idle states are
compatible with "domain-idle-state", the initialized genpd becomes
responsible of selecting an idle state for the PM domain, via assigning it
a genpd governor.
Note that, a successful initialization of the genpd data structures, is
followed by a call to psci_set_osi_mode(), as to try to enable the OSI mode
in the PSCI FW. In case this fails, we fall back into a degraded mode
rather than bailing out and returning error codes.
Co-developed-by: Lina Iyer <lina.iyer@linaro.org>
Signed-off-by: Lina Iyer <lina.iyer@linaro.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Rafael J. Wysocki <rafael@kernel.org>
2019-10-10 18:01:48 +08:00
|
|
|
|
|
|
|
ret = pm_genpd_init(pd, pd_gov, false);
|
2022-02-10 13:49:44 +08:00
|
|
|
if (ret)
|
|
|
|
goto free_pd_prov;
|
cpuidle: psci: Add support for PM domains by using genpd
When the hierarchical CPU topology layout is used in DT and the PSCI OSI
mode is supported by the PSCI FW, let's initialize a corresponding PM
domain topology by using genpd. This enables a CPU and a group of CPUs,
when attached to the topology, to be power-managed accordingly.
To trigger the attempt to initialize the genpd data structures let's use a
subsys_initcall, which should be early enough to allow CPUs, but also other
devices to be attached.
The initialization consists of parsing the PSCI OF node for the topology
and the "domain idle states" DT bindings. In case the idle states are
compatible with "domain-idle-state", the initialized genpd becomes
responsible of selecting an idle state for the PM domain, via assigning it
a genpd governor.
Note that, a successful initialization of the genpd data structures, is
followed by a call to psci_set_osi_mode(), as to try to enable the OSI mode
in the PSCI FW. In case this fails, we fall back into a degraded mode
rather than bailing out and returning error codes.
Co-developed-by: Lina Iyer <lina.iyer@linaro.org>
Signed-off-by: Lina Iyer <lina.iyer@linaro.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Rafael J. Wysocki <rafael@kernel.org>
2019-10-10 18:01:48 +08:00
|
|
|
|
|
|
|
ret = of_genpd_add_provider_simple(np, pd);
|
|
|
|
if (ret)
|
|
|
|
goto remove_pd;
|
|
|
|
|
|
|
|
pd_provider->node = of_node_get(np);
|
|
|
|
list_add(&pd_provider->link, &psci_pd_providers);
|
|
|
|
|
|
|
|
pr_debug("init PM domain %s\n", pd->name);
|
|
|
|
return 0;
|
|
|
|
|
|
|
|
remove_pd:
|
|
|
|
pm_genpd_remove(pd);
|
|
|
|
free_pd_prov:
|
|
|
|
kfree(pd_provider);
|
|
|
|
free_pd:
|
2022-02-10 13:49:44 +08:00
|
|
|
dt_idle_pd_free(pd);
|
cpuidle: psci: Add support for PM domains by using genpd
When the hierarchical CPU topology layout is used in DT and the PSCI OSI
mode is supported by the PSCI FW, let's initialize a corresponding PM
domain topology by using genpd. This enables a CPU and a group of CPUs,
when attached to the topology, to be power-managed accordingly.
To trigger the attempt to initialize the genpd data structures let's use a
subsys_initcall, which should be early enough to allow CPUs, but also other
devices to be attached.
The initialization consists of parsing the PSCI OF node for the topology
and the "domain idle states" DT bindings. In case the idle states are
compatible with "domain-idle-state", the initialized genpd becomes
responsible of selecting an idle state for the PM domain, via assigning it
a genpd governor.
Note that, a successful initialization of the genpd data structures, is
followed by a call to psci_set_osi_mode(), as to try to enable the OSI mode
in the PSCI FW. In case this fails, we fall back into a degraded mode
rather than bailing out and returning error codes.
Co-developed-by: Lina Iyer <lina.iyer@linaro.org>
Signed-off-by: Lina Iyer <lina.iyer@linaro.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Rafael J. Wysocki <rafael@kernel.org>
2019-10-10 18:01:48 +08:00
|
|
|
out:
|
|
|
|
pr_err("failed to init PM domain ret=%d %pOF\n", ret, np);
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
2020-07-07 20:58:03 +08:00
|
|
|
static void psci_pd_remove(void)
|
cpuidle: psci: Add support for PM domains by using genpd
When the hierarchical CPU topology layout is used in DT and the PSCI OSI
mode is supported by the PSCI FW, let's initialize a corresponding PM
domain topology by using genpd. This enables a CPU and a group of CPUs,
when attached to the topology, to be power-managed accordingly.
To trigger the attempt to initialize the genpd data structures let's use a
subsys_initcall, which should be early enough to allow CPUs, but also other
devices to be attached.
The initialization consists of parsing the PSCI OF node for the topology
and the "domain idle states" DT bindings. In case the idle states are
compatible with "domain-idle-state", the initialized genpd becomes
responsible of selecting an idle state for the PM domain, via assigning it
a genpd governor.
Note that, a successful initialization of the genpd data structures, is
followed by a call to psci_set_osi_mode(), as to try to enable the OSI mode
in the PSCI FW. In case this fails, we fall back into a degraded mode
rather than bailing out and returning error codes.
Co-developed-by: Lina Iyer <lina.iyer@linaro.org>
Signed-off-by: Lina Iyer <lina.iyer@linaro.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Rafael J. Wysocki <rafael@kernel.org>
2019-10-10 18:01:48 +08:00
|
|
|
{
|
|
|
|
struct psci_pd_provider *pd_provider, *it;
|
|
|
|
struct generic_pm_domain *genpd;
|
|
|
|
|
2023-03-04 15:41:07 +08:00
|
|
|
list_for_each_entry_safe_reverse(pd_provider, it,
|
|
|
|
&psci_pd_providers, link) {
|
cpuidle: psci: Add support for PM domains by using genpd
When the hierarchical CPU topology layout is used in DT and the PSCI OSI
mode is supported by the PSCI FW, let's initialize a corresponding PM
domain topology by using genpd. This enables a CPU and a group of CPUs,
when attached to the topology, to be power-managed accordingly.
To trigger the attempt to initialize the genpd data structures let's use a
subsys_initcall, which should be early enough to allow CPUs, but also other
devices to be attached.
The initialization consists of parsing the PSCI OF node for the topology
and the "domain idle states" DT bindings. In case the idle states are
compatible with "domain-idle-state", the initialized genpd becomes
responsible of selecting an idle state for the PM domain, via assigning it
a genpd governor.
Note that, a successful initialization of the genpd data structures, is
followed by a call to psci_set_osi_mode(), as to try to enable the OSI mode
in the PSCI FW. In case this fails, we fall back into a degraded mode
rather than bailing out and returning error codes.
Co-developed-by: Lina Iyer <lina.iyer@linaro.org>
Signed-off-by: Lina Iyer <lina.iyer@linaro.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Rafael J. Wysocki <rafael@kernel.org>
2019-10-10 18:01:48 +08:00
|
|
|
of_genpd_del_provider(pd_provider->node);
|
|
|
|
|
|
|
|
genpd = of_genpd_remove_last(pd_provider->node);
|
|
|
|
if (!IS_ERR(genpd))
|
|
|
|
kfree(genpd);
|
|
|
|
|
|
|
|
of_node_put(pd_provider->node);
|
|
|
|
list_del(&pd_provider->link);
|
|
|
|
kfree(pd_provider);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
cpuidle: psci: Prevent domain idlestates until consumers are ready
Depending on the SoC/platform, additional devices may be part of the PSCI
PM domain topology. This is the case with 'qcom,rpmh-rsc' device, for
example, even if this is not yet visible in the corresponding DTS-files.
Without going into too much details, a device like the 'qcom,rpmh-rsc' may
have HW constraints that needs to be obeyed to, before a domain idlestate
can be picked.
Therefore, let's implement the ->sync_state() callback to receive a
notification when all consumers of the PSCI PM domain providers have been
attached/probed to it. In this way, we can make sure all constraints from
all relevant devices, are taken into account before allowing a domain
idlestate to be picked.
Acked-by: Saravana Kannan <saravanak@google.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-07-07 20:58:04 +08:00
|
|
|
static void psci_cpuidle_domain_sync_state(struct device *dev)
|
|
|
|
{
|
|
|
|
/*
|
|
|
|
* All devices have now been attached/probed to the PM domain topology,
|
|
|
|
* hence it's fine to allow domain states to be picked.
|
|
|
|
*/
|
|
|
|
psci_pd_allow_domain_state = true;
|
|
|
|
}
|
|
|
|
|
2020-07-07 20:58:03 +08:00
|
|
|
static const struct of_device_id psci_of_match[] = {
|
cpuidle: psci: Add support for PM domains by using genpd
When the hierarchical CPU topology layout is used in DT and the PSCI OSI
mode is supported by the PSCI FW, let's initialize a corresponding PM
domain topology by using genpd. This enables a CPU and a group of CPUs,
when attached to the topology, to be power-managed accordingly.
To trigger the attempt to initialize the genpd data structures let's use a
subsys_initcall, which should be early enough to allow CPUs, but also other
devices to be attached.
The initialization consists of parsing the PSCI OF node for the topology
and the "domain idle states" DT bindings. In case the idle states are
compatible with "domain-idle-state", the initialized genpd becomes
responsible of selecting an idle state for the PM domain, via assigning it
a genpd governor.
Note that, a successful initialization of the genpd data structures, is
followed by a call to psci_set_osi_mode(), as to try to enable the OSI mode
in the PSCI FW. In case this fails, we fall back into a degraded mode
rather than bailing out and returning error codes.
Co-developed-by: Lina Iyer <lina.iyer@linaro.org>
Signed-off-by: Lina Iyer <lina.iyer@linaro.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Rafael J. Wysocki <rafael@kernel.org>
2019-10-10 18:01:48 +08:00
|
|
|
{ .compatible = "arm,psci-1.0" },
|
|
|
|
{}
|
|
|
|
};
|
|
|
|
|
2020-07-07 20:58:03 +08:00
|
|
|
static int psci_cpuidle_domain_probe(struct platform_device *pdev)
|
cpuidle: psci: Add support for PM domains by using genpd
When the hierarchical CPU topology layout is used in DT and the PSCI OSI
mode is supported by the PSCI FW, let's initialize a corresponding PM
domain topology by using genpd. This enables a CPU and a group of CPUs,
when attached to the topology, to be power-managed accordingly.
To trigger the attempt to initialize the genpd data structures let's use a
subsys_initcall, which should be early enough to allow CPUs, but also other
devices to be attached.
The initialization consists of parsing the PSCI OF node for the topology
and the "domain idle states" DT bindings. In case the idle states are
compatible with "domain-idle-state", the initialized genpd becomes
responsible of selecting an idle state for the PM domain, via assigning it
a genpd governor.
Note that, a successful initialization of the genpd data structures, is
followed by a call to psci_set_osi_mode(), as to try to enable the OSI mode
in the PSCI FW. In case this fails, we fall back into a degraded mode
rather than bailing out and returning error codes.
Co-developed-by: Lina Iyer <lina.iyer@linaro.org>
Signed-off-by: Lina Iyer <lina.iyer@linaro.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Rafael J. Wysocki <rafael@kernel.org>
2019-10-10 18:01:48 +08:00
|
|
|
{
|
2020-07-07 20:58:03 +08:00
|
|
|
struct device_node *np = pdev->dev.of_node;
|
cpuidle: psci: Add support for PM domains by using genpd
When the hierarchical CPU topology layout is used in DT and the PSCI OSI
mode is supported by the PSCI FW, let's initialize a corresponding PM
domain topology by using genpd. This enables a CPU and a group of CPUs,
when attached to the topology, to be power-managed accordingly.
To trigger the attempt to initialize the genpd data structures let's use a
subsys_initcall, which should be early enough to allow CPUs, but also other
devices to be attached.
The initialization consists of parsing the PSCI OF node for the topology
and the "domain idle states" DT bindings. In case the idle states are
compatible with "domain-idle-state", the initialized genpd becomes
responsible of selecting an idle state for the PM domain, via assigning it
a genpd governor.
Note that, a successful initialization of the genpd data structures, is
followed by a call to psci_set_osi_mode(), as to try to enable the OSI mode
in the PSCI FW. In case this fails, we fall back into a degraded mode
rather than bailing out and returning error codes.
Co-developed-by: Lina Iyer <lina.iyer@linaro.org>
Signed-off-by: Lina Iyer <lina.iyer@linaro.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Rafael J. Wysocki <rafael@kernel.org>
2019-10-10 18:01:48 +08:00
|
|
|
struct device_node *node;
|
2023-07-03 16:55:54 +08:00
|
|
|
bool use_osi = psci_has_osi_support();
|
cpuidle: psci: Add support for PM domains by using genpd
When the hierarchical CPU topology layout is used in DT and the PSCI OSI
mode is supported by the PSCI FW, let's initialize a corresponding PM
domain topology by using genpd. This enables a CPU and a group of CPUs,
when attached to the topology, to be power-managed accordingly.
To trigger the attempt to initialize the genpd data structures let's use a
subsys_initcall, which should be early enough to allow CPUs, but also other
devices to be attached.
The initialization consists of parsing the PSCI OF node for the topology
and the "domain idle states" DT bindings. In case the idle states are
compatible with "domain-idle-state", the initialized genpd becomes
responsible of selecting an idle state for the PM domain, via assigning it
a genpd governor.
Note that, a successful initialization of the genpd data structures, is
followed by a call to psci_set_osi_mode(), as to try to enable the OSI mode
in the PSCI FW. In case this fails, we fall back into a degraded mode
rather than bailing out and returning error codes.
Co-developed-by: Lina Iyer <lina.iyer@linaro.org>
Signed-off-by: Lina Iyer <lina.iyer@linaro.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Rafael J. Wysocki <rafael@kernel.org>
2019-10-10 18:01:48 +08:00
|
|
|
int ret = 0, pd_count = 0;
|
|
|
|
|
|
|
|
if (!np)
|
|
|
|
return -ENODEV;
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Parse child nodes for the "#power-domain-cells" property and
|
|
|
|
* initialize a genpd/genpd-of-provider pair when it's found.
|
|
|
|
*/
|
|
|
|
for_each_child_of_node(np, node) {
|
2023-03-10 22:47:03 +08:00
|
|
|
if (!of_property_present(node, "#power-domain-cells"))
|
cpuidle: psci: Add support for PM domains by using genpd
When the hierarchical CPU topology layout is used in DT and the PSCI OSI
mode is supported by the PSCI FW, let's initialize a corresponding PM
domain topology by using genpd. This enables a CPU and a group of CPUs,
when attached to the topology, to be power-managed accordingly.
To trigger the attempt to initialize the genpd data structures let's use a
subsys_initcall, which should be early enough to allow CPUs, but also other
devices to be attached.
The initialization consists of parsing the PSCI OF node for the topology
and the "domain idle states" DT bindings. In case the idle states are
compatible with "domain-idle-state", the initialized genpd becomes
responsible of selecting an idle state for the PM domain, via assigning it
a genpd governor.
Note that, a successful initialization of the genpd data structures, is
followed by a call to psci_set_osi_mode(), as to try to enable the OSI mode
in the PSCI FW. In case this fails, we fall back into a degraded mode
rather than bailing out and returning error codes.
Co-developed-by: Lina Iyer <lina.iyer@linaro.org>
Signed-off-by: Lina Iyer <lina.iyer@linaro.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Rafael J. Wysocki <rafael@kernel.org>
2019-10-10 18:01:48 +08:00
|
|
|
continue;
|
|
|
|
|
2020-09-01 22:28:59 +08:00
|
|
|
ret = psci_pd_init(node, use_osi);
|
2023-07-03 16:55:54 +08:00
|
|
|
if (ret) {
|
|
|
|
of_node_put(node);
|
|
|
|
goto exit;
|
|
|
|
}
|
cpuidle: psci: Add support for PM domains by using genpd
When the hierarchical CPU topology layout is used in DT and the PSCI OSI
mode is supported by the PSCI FW, let's initialize a corresponding PM
domain topology by using genpd. This enables a CPU and a group of CPUs,
when attached to the topology, to be power-managed accordingly.
To trigger the attempt to initialize the genpd data structures let's use a
subsys_initcall, which should be early enough to allow CPUs, but also other
devices to be attached.
The initialization consists of parsing the PSCI OF node for the topology
and the "domain idle states" DT bindings. In case the idle states are
compatible with "domain-idle-state", the initialized genpd becomes
responsible of selecting an idle state for the PM domain, via assigning it
a genpd governor.
Note that, a successful initialization of the genpd data structures, is
followed by a call to psci_set_osi_mode(), as to try to enable the OSI mode
in the PSCI FW. In case this fails, we fall back into a degraded mode
rather than bailing out and returning error codes.
Co-developed-by: Lina Iyer <lina.iyer@linaro.org>
Signed-off-by: Lina Iyer <lina.iyer@linaro.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Rafael J. Wysocki <rafael@kernel.org>
2019-10-10 18:01:48 +08:00
|
|
|
|
|
|
|
pd_count++;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* Bail out if not using the hierarchical CPU topology. */
|
|
|
|
if (!pd_count)
|
2023-07-03 16:55:54 +08:00
|
|
|
return 0;
|
cpuidle: psci: Add support for PM domains by using genpd
When the hierarchical CPU topology layout is used in DT and the PSCI OSI
mode is supported by the PSCI FW, let's initialize a corresponding PM
domain topology by using genpd. This enables a CPU and a group of CPUs,
when attached to the topology, to be power-managed accordingly.
To trigger the attempt to initialize the genpd data structures let's use a
subsys_initcall, which should be early enough to allow CPUs, but also other
devices to be attached.
The initialization consists of parsing the PSCI OF node for the topology
and the "domain idle states" DT bindings. In case the idle states are
compatible with "domain-idle-state", the initialized genpd becomes
responsible of selecting an idle state for the PM domain, via assigning it
a genpd governor.
Note that, a successful initialization of the genpd data structures, is
followed by a call to psci_set_osi_mode(), as to try to enable the OSI mode
in the PSCI FW. In case this fails, we fall back into a degraded mode
rather than bailing out and returning error codes.
Co-developed-by: Lina Iyer <lina.iyer@linaro.org>
Signed-off-by: Lina Iyer <lina.iyer@linaro.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Rafael J. Wysocki <rafael@kernel.org>
2019-10-10 18:01:48 +08:00
|
|
|
|
|
|
|
/* Link genpd masters/subdomains to model the CPU topology. */
|
2022-02-10 13:49:44 +08:00
|
|
|
ret = dt_idle_pd_init_topology(np);
|
cpuidle: psci: Add support for PM domains by using genpd
When the hierarchical CPU topology layout is used in DT and the PSCI OSI
mode is supported by the PSCI FW, let's initialize a corresponding PM
domain topology by using genpd. This enables a CPU and a group of CPUs,
when attached to the topology, to be power-managed accordingly.
To trigger the attempt to initialize the genpd data structures let's use a
subsys_initcall, which should be early enough to allow CPUs, but also other
devices to be attached.
The initialization consists of parsing the PSCI OF node for the topology
and the "domain idle states" DT bindings. In case the idle states are
compatible with "domain-idle-state", the initialized genpd becomes
responsible of selecting an idle state for the PM domain, via assigning it
a genpd governor.
Note that, a successful initialization of the genpd data structures, is
followed by a call to psci_set_osi_mode(), as to try to enable the OSI mode
in the PSCI FW. In case this fails, we fall back into a degraded mode
rather than bailing out and returning error codes.
Co-developed-by: Lina Iyer <lina.iyer@linaro.org>
Signed-off-by: Lina Iyer <lina.iyer@linaro.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Rafael J. Wysocki <rafael@kernel.org>
2019-10-10 18:01:48 +08:00
|
|
|
if (ret)
|
|
|
|
goto remove_pd;
|
|
|
|
|
2023-07-03 16:55:54 +08:00
|
|
|
/* let's try to enable OSI. */
|
|
|
|
ret = psci_set_osi_mode(use_osi);
|
|
|
|
if (ret)
|
|
|
|
goto remove_pd;
|
|
|
|
|
2022-10-20 19:55:13 +08:00
|
|
|
pr_info("Initialized CPU PM domain topology using %s mode\n",
|
|
|
|
use_osi ? "OSI" : "PC");
|
2020-07-07 20:58:03 +08:00
|
|
|
return 0;
|
cpuidle: psci: Add support for PM domains by using genpd
When the hierarchical CPU topology layout is used in DT and the PSCI OSI
mode is supported by the PSCI FW, let's initialize a corresponding PM
domain topology by using genpd. This enables a CPU and a group of CPUs,
when attached to the topology, to be power-managed accordingly.
To trigger the attempt to initialize the genpd data structures let's use a
subsys_initcall, which should be early enough to allow CPUs, but also other
devices to be attached.
The initialization consists of parsing the PSCI OF node for the topology
and the "domain idle states" DT bindings. In case the idle states are
compatible with "domain-idle-state", the initialized genpd becomes
responsible of selecting an idle state for the PM domain, via assigning it
a genpd governor.
Note that, a successful initialization of the genpd data structures, is
followed by a call to psci_set_osi_mode(), as to try to enable the OSI mode
in the PSCI FW. In case this fails, we fall back into a degraded mode
rather than bailing out and returning error codes.
Co-developed-by: Lina Iyer <lina.iyer@linaro.org>
Signed-off-by: Lina Iyer <lina.iyer@linaro.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Rafael J. Wysocki <rafael@kernel.org>
2019-10-10 18:01:48 +08:00
|
|
|
|
|
|
|
remove_pd:
|
2023-07-03 16:55:54 +08:00
|
|
|
dt_idle_pd_remove_topology(np);
|
2020-09-01 22:28:59 +08:00
|
|
|
psci_pd_remove();
|
2023-07-03 16:55:54 +08:00
|
|
|
exit:
|
cpuidle: psci: Add support for PM domains by using genpd
When the hierarchical CPU topology layout is used in DT and the PSCI OSI
mode is supported by the PSCI FW, let's initialize a corresponding PM
domain topology by using genpd. This enables a CPU and a group of CPUs,
when attached to the topology, to be power-managed accordingly.
To trigger the attempt to initialize the genpd data structures let's use a
subsys_initcall, which should be early enough to allow CPUs, but also other
devices to be attached.
The initialization consists of parsing the PSCI OF node for the topology
and the "domain idle states" DT bindings. In case the idle states are
compatible with "domain-idle-state", the initialized genpd becomes
responsible of selecting an idle state for the PM domain, via assigning it
a genpd governor.
Note that, a successful initialization of the genpd data structures, is
followed by a call to psci_set_osi_mode(), as to try to enable the OSI mode
in the PSCI FW. In case this fails, we fall back into a degraded mode
rather than bailing out and returning error codes.
Co-developed-by: Lina Iyer <lina.iyer@linaro.org>
Signed-off-by: Lina Iyer <lina.iyer@linaro.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Rafael J. Wysocki <rafael@kernel.org>
2019-10-10 18:01:48 +08:00
|
|
|
pr_err("failed to create CPU PM domains ret=%d\n", ret);
|
|
|
|
return ret;
|
|
|
|
}
|
2020-07-07 20:58:03 +08:00
|
|
|
|
|
|
|
static struct platform_driver psci_cpuidle_domain_driver = {
|
|
|
|
.probe = psci_cpuidle_domain_probe,
|
|
|
|
.driver = {
|
|
|
|
.name = "psci-cpuidle-domain",
|
|
|
|
.of_match_table = psci_of_match,
|
cpuidle: psci: Prevent domain idlestates until consumers are ready
Depending on the SoC/platform, additional devices may be part of the PSCI
PM domain topology. This is the case with 'qcom,rpmh-rsc' device, for
example, even if this is not yet visible in the corresponding DTS-files.
Without going into too much details, a device like the 'qcom,rpmh-rsc' may
have HW constraints that needs to be obeyed to, before a domain idlestate
can be picked.
Therefore, let's implement the ->sync_state() callback to receive a
notification when all consumers of the PSCI PM domain providers have been
attached/probed to it. In this way, we can make sure all constraints from
all relevant devices, are taken into account before allowing a domain
idlestate to be picked.
Acked-by: Saravana Kannan <saravanak@google.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-07-07 20:58:04 +08:00
|
|
|
.sync_state = psci_cpuidle_domain_sync_state,
|
2020-07-07 20:58:03 +08:00
|
|
|
},
|
|
|
|
};
|
|
|
|
|
|
|
|
static int __init psci_idle_init_domains(void)
|
|
|
|
{
|
|
|
|
return platform_driver_register(&psci_cpuidle_domain_driver);
|
|
|
|
}
|
cpuidle: psci: Add support for PM domains by using genpd
When the hierarchical CPU topology layout is used in DT and the PSCI OSI
mode is supported by the PSCI FW, let's initialize a corresponding PM
domain topology by using genpd. This enables a CPU and a group of CPUs,
when attached to the topology, to be power-managed accordingly.
To trigger the attempt to initialize the genpd data structures let's use a
subsys_initcall, which should be early enough to allow CPUs, but also other
devices to be attached.
The initialization consists of parsing the PSCI OF node for the topology
and the "domain idle states" DT bindings. In case the idle states are
compatible with "domain-idle-state", the initialized genpd becomes
responsible of selecting an idle state for the PM domain, via assigning it
a genpd governor.
Note that, a successful initialization of the genpd data structures, is
followed by a call to psci_set_osi_mode(), as to try to enable the OSI mode
in the PSCI FW. In case this fails, we fall back into a degraded mode
rather than bailing out and returning error codes.
Co-developed-by: Lina Iyer <lina.iyer@linaro.org>
Signed-off-by: Lina Iyer <lina.iyer@linaro.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Rafael J. Wysocki <rafael@kernel.org>
2019-10-10 18:01:48 +08:00
|
|
|
subsys_initcall(psci_idle_init_domains);
|