OpenCloudOS-Kernel/drivers/net/wan/sdla_ft1.c

/*****************************************************************************
* sdla_chdlc.c	WANPIPE(tm) Multiprotocol WAN Link Driver. Cisco HDLC module.
*
* Authors: 	Nenad Corbic <ncorbic@sangoma.com>
*		Gideon Hack  
*
* Copyright:	(c) 1995-1999 Sangoma Technologies Inc.
*
*		This program is free software; you can redistribute it and/or
*		modify it under the terms of the GNU General Public License
*		as published by the Free Software Foundation; either version
*		2 of the License, or (at your option) any later version.
* ============================================================================
* Sep 30, 1999  Nenad Corbic    Fixed dynamic IP and route setup.
* Sep 23, 1999  Nenad Corbic    Added SMP support, fixed tracing 
* Sep 13, 1999  Nenad Corbic	Split up Port 0 and 1 into separate devices.
* Jun 02, 1999  Gideon Hack     Added support for the S514 adapter.
* Oct 30, 1998	Jaspreet Singh	Added Support for CHDLC API (HDLC STREAMING).
* Oct 28, 1998	Jaspreet Singh	Added Support for Dual Port CHDLC.
* Aug 07, 1998	David Fong	Initial version.
*****************************************************************************/

#include <linux/module.h>
#include <linux/kernel.h>	/* printk(), and other useful stuff */
#include <linux/stddef.h>	/* offsetof(), etc. */
#include <linux/errno.h>	/* return codes */
#include <linux/string.h>	/* inline memset(), etc. */
#include <linux/slab.h>		/* kmalloc(), kfree() */
#include <linux/wanrouter.h>	/* WAN router definitions */
#include <linux/wanpipe.h>	/* WANPIPE common user API definitions */
#include <linux/if_arp.h>	/* ARPHRD_* defines */
#include <linux/jiffies.h>	/* time_after() macro */

#include <linux/inetdevice.h>
#include <asm/uaccess.h>

#include <linux/in.h>		/* sockaddr_in */
#include <linux/inet.h>	
#include <linux/if.h>
#include <asm/byteorder.h>	/* htons(), etc. */
#include <linux/sdlapci.h>
#include <asm/io.h>

#include <linux/sdla_chdlc.h>		/* CHDLC firmware API definitions */

/****** Defines & Macros ****************************************************/

/* reasons for enabling the timer interrupt on the adapter */
#define TMR_INT_ENABLED_UDP   	0x0001
#define TMR_INT_ENABLED_UPDATE	0x0002
 
#define	CHDLC_DFLT_DATA_LEN	1500		/* default MTU */
#define CHDLC_HDR_LEN		1

#define IFF_POINTTOPOINT 0x10

#define WANPIPE 0x00
#define API	0x01
#define CHDLC_API 0x01

#define PORT(x)   (x == 0 ? "PRIMARY" : "SECONDARY" )

 
/******Data Structures*****************************************************/

/* This structure is placed in the private data area of the device structure.
 * The card structure used to occupy the private area but now the following 
 * structure will incorporate the card structure along with CHDLC specific data
 */

typedef struct chdlc_private_area
{
	struct net_device *slave;
	sdla_t		*card;
	int 		TracingEnabled;		/* For enabling Tracing */
	unsigned long 	curr_trace_addr;	/* Used for Tracing */
	unsigned long 	start_trace_addr;
	unsigned long 	end_trace_addr;
	unsigned long 	base_addr_trace_buffer;
	unsigned long 	end_addr_trace_buffer;
	unsigned short 	number_trace_elements;
	unsigned  	available_buffer_space;
	unsigned long 	router_start_time;
	unsigned char 	route_status;
	unsigned char 	route_removed;
	unsigned long 	tick_counter;		/* For 5s timeout counter */
	unsigned long 	router_up_time;
        u32             IP_address;		/* IP addressing */
        u32             IP_netmask;
	unsigned char  mc;			/* Mulitcast support on/off */
	unsigned short udp_pkt_lgth;		/* udp packet processing */
	char udp_pkt_src;
	char udp_pkt_data[MAX_LGTH_UDP_MGNT_PKT];
	unsigned short timer_int_enabled;
	char update_comms_stats;		/* updating comms stats */
	//FIXME: add driver stats as per frame relay!

} chdlc_private_area_t;

/* Route Status options */
#define NO_ROUTE	0x00
#define ADD_ROUTE	0x01
#define ROUTE_ADDED	0x02
#define REMOVE_ROUTE	0x03


/****** Function Prototypes *************************************************/
/* WAN link driver entry points. These are called by the WAN router module. */
static int wpft1_exec (struct sdla *card, void *u_cmd, void *u_data);
static int chdlc_read_version (sdla_t* card, char* str);
static int chdlc_error (sdla_t *card, int err, CHDLC_MAILBOX_STRUCT *mb);

/****** Public Functions ****************************************************/

/*============================================================================
 * Cisco HDLC protocol initialization routine.
 *
 * This routine is called by the main WANPIPE module during setup.  At this
 * point adapter is completely initialized and firmware is running.
 *  o read firmware version (to make sure it's alive)
 *  o configure adapter
 *  o initialize protocol-specific fields of the adapter data space.
 *
 * Return:	0	o.k.
 *		< 0	failure.
 */
int wpft1_init (sdla_t* card, wandev_conf_t* conf)
{
	unsigned char port_num;
	int err;

	union
		{
		char str[80];
		} u;
	volatile CHDLC_MAILBOX_STRUCT* mb;
	CHDLC_MAILBOX_STRUCT* mb1;
	unsigned long timeout;

	/* Verify configuration ID */
	if (conf->config_id != WANCONFIG_CHDLC) {
		printk(KERN_INFO "%s: invalid configuration ID %u!\n",
				  card->devname, conf->config_id);
		return -EINVAL;
	}

	/* Use primary port */
	card->u.c.comm_port = 0;
	

	/* Initialize protocol-specific fields */
	if(card->hw.type != SDLA_S514){
		card->mbox  = (void *) card->hw.dpmbase;
	}else{ 
		card->mbox = (void *) card->hw.dpmbase + PRI_BASE_ADDR_MB_STRUCT;
	}

	mb = mb1 = card->mbox;

	if (!card->configured){

		/* The board will place an 'I' in the return code to indicate that it is
	   	ready to accept commands.  We expect this to be completed in less
           	than 1 second. */

		timeout = jiffies;
		while (mb->return_code != 'I')	/* Wait 1s for board to initialize */
			if (time_after(jiffies, timeout + 1*HZ)) break;

		if (mb->return_code != 'I') {
			printk(KERN_INFO
				"%s: Initialization not completed by adapter\n",
				card->devname);
			printk(KERN_INFO "Please contact Sangoma representative.\n");
			return -EIO;
		}
	}

	/* Read firmware version.  Note that when adapter initializes, it
	 * clears the mailbox, so it may appear that the first command was
	 * executed successfully when in fact it was merely erased. To work
	 * around this, we execute the first command twice.
	 */

	if (chdlc_read_version(card, u.str))
		return -EIO;

	printk(KERN_INFO "%s: Running FT1 Configuration firmware v%s\n",
		card->devname, u.str); 

	card->isr			= NULL;
	card->poll			= NULL;
	card->exec			= &wpft1_exec;
	card->wandev.update		= NULL;
 	card->wandev.new_if		= NULL;
	card->wandev.del_if		= NULL;
	card->wandev.state		= WAN_DUALPORT;
	card->wandev.udp_port   	= conf->udp_port;

	card->wandev.new_if_cnt = 0;

	/* This is for the ports link state */
	card->u.c.state = WAN_DISCONNECTED;
	
	/* reset the number of times the 'update()' proc has been called */
	card->u.c.update_call_count = 0;
	
	card->wandev.ttl = 0x7F;
	card->wandev.interface = 0; 

	card->wandev.clocking = 0;

	port_num = card->u.c.comm_port;

	/* Setup Port Bps */

       	card->wandev.bps = 0;

	card->wandev.mtu = MIN_LGTH_CHDLC_DATA_CFG;

	/* Set up the interrupt status area */
	/* Read the CHDLC Configuration and obtain: 
	 *	Ptr to shared memory infor struct
         * Use this pointer to calculate the value of card->u.c.flags !
 	 */
	mb1->buffer_length = 0;
	mb1->command = READ_CHDLC_CONFIGURATION;
	err = sdla_exec(mb1) ? mb1->return_code : CMD_TIMEOUT;
	if(err != COMMAND_OK) {
		chdlc_error(card, err, mb1);
		return -EIO;
	}

	if(card->hw.type == SDLA_S514){
               	card->u.c.flags = (void *)(card->hw.dpmbase +
               		(((CHDLC_CONFIGURATION_STRUCT *)mb1->data)->
			ptr_shared_mem_info_struct));
        }else{
                card->u.c.flags = (void *)(card->hw.dpmbase +
                        (((CHDLC_CONFIGURATION_STRUCT *)mb1->data)->
			ptr_shared_mem_info_struct % SDLA_WINDOWSIZE));
	}

	card->wandev.state = WAN_FT1_READY;
	printk(KERN_INFO "%s: FT1 Config Ready !\n",card->devname);

	return 0;
}

static int wpft1_exec(sdla_t *card, void *u_cmd, void *u_data)
{
	CHDLC_MAILBOX_STRUCT* mbox = card->mbox;
	int len;

	if (copy_from_user((void*)&mbox->command, u_cmd, sizeof(ft1_exec_cmd_t))){
		return -EFAULT;
	}

	len = mbox->buffer_length;

	if (len) {
		if( copy_from_user((void*)&mbox->data, u_data, len)){
			return -EFAULT;
		}
	}

	/* execute command */
	if (!sdla_exec(mbox)){
		return -EIO;
	}

	/* return result */
	if( copy_to_user(u_cmd, (void*)&mbox->command, sizeof(ft1_exec_cmd_t))){
		return -EFAULT;
	}

	len = mbox->buffer_length;

	if (len && u_data && copy_to_user(u_data, (void*)&mbox->data, len)){
		return -EFAULT;
	}

	return 0;

}

/*============================================================================
 * Read firmware code version.
 *	Put code version as ASCII string in str. 
 */
static int chdlc_read_version (sdla_t* card, char* str)
{
	CHDLC_MAILBOX_STRUCT* mb = card->mbox;
	int len;
	char err;
	mb->buffer_length = 0;
	mb->command = READ_CHDLC_CODE_VERSION;
	err = sdla_exec(mb) ? mb->return_code : CMD_TIMEOUT;

	if(err != COMMAND_OK) {
		chdlc_error(card,err,mb);
	}
	else if (str) {  /* is not null */
		len = mb->buffer_length;
		memcpy(str, mb->data, len);
		str[len] = '\0';
	}
	return (err);
}

/*============================================================================
 * Firmware error handler.
 *	This routine is called whenever firmware command returns non-zero
 *	return code.
 *
 * Return zero if previous command has to be cancelled.
 */
static int chdlc_error (sdla_t *card, int err, CHDLC_MAILBOX_STRUCT *mb)
{
	unsigned cmd = mb->command;

	switch (err) {

	case CMD_TIMEOUT:
		printk(KERN_ERR "%s: command 0x%02X timed out!\n",
			card->devname, cmd);
		break;

	case S514_BOTH_PORTS_SAME_CLK_MODE:
		if(cmd == SET_CHDLC_CONFIGURATION) {
			printk(KERN_INFO
			 "%s: Configure both ports for the same clock source\n",
				card->devname);
			break;
		}

	default:
		printk(KERN_INFO "%s: command 0x%02X returned 0x%02X!\n",
			card->devname, cmd, err);
	}

	return 0;
}

MODULE_LICENSE("GPL");