UbiquitousOS
/
OpenCloudOS-Kernel
mirror of https://gitee.com/OpenCloudOS/OpenCloudOS-Kernel.git
11
0
Fork 0
Code Issues Projects Releases Wiki Activity
OpenCloudOS-Kernel/arch/arm/mach-davinci/da850.c

881 lines
25 KiB
C
Raw Normal View History

davinci: Add base DA850/OMAP-L138 SoC support The DA850/OMAP-L138 is a new SoC from TI in the same family as DA830/OMAP-L137. Major changes include better support for power management, support for SATA devices and McBSP (same IP as DM644x). DA850/OMAP-L138 documents are available at http://focus.ti.com/docs/prod/folders/print/omap-l138.html. Signed-off-by: Sudhakar Rajashekhara <sudhakar.raj@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2009-07-16 18:41:54 +08:00
/*
* TI DA850/OMAP-L138 chip specific setup
*
* Copyright (C) 2009 Texas Instruments Incorporated - http://www.ti.com/
*
* Derived from: arch/arm/mach-davinci/da830.c
* Original Copyrights follow:
*
* 2009 (c) MontaVista Software, Inc. This file is licensed under
* the terms of the GNU General Public License version 2. This program
* is licensed "as is" without any warranty of any kind, whether express
* or implied.
*/
ARM: davinci: da850: add new clock init using common clock framework This adds the new board-specific clock init in mach-davinci/da850.c using the new common clock framework drivers. The #ifdefs are needed to prevent compile errors until the entire ARCH_DAVINCI is converted. Also clean up the #includes since we are adding some here. Some CFGCHIP macros were removed because we are now including linux/mfd/da8xx-cfgchip.h which defines the same values. Reviewed-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: David Lechner <david@lechnology.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2018-05-19 00:48:08 +08:00
#include <linux/clk-provider.h>
#include <linux/clk/davinci.h>
clkdev: get rid of redundant clk_add_alias() prototype in linux/clk.h clk_add_alias() is provided by clkdev, and is not part of the clk API. Howver, it is prototyped in two locations: linux/clkdev.h and linux/clk.h. This is a mess. Get rid of the redundant and unnecessary version in linux/clk.h. Acked-by: Tony Lindgren <tony@atomide.com> Tested-by: Robert Jarzmik <robert.jarzmik@free.fr> Acked-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2015-03-09 19:03:00 +08:00
#include <linux/clkdev.h>
ARM: davinci: da850: add new clock init using common clock framework This adds the new board-specific clock init in mach-davinci/da850.c using the new common clock framework drivers. The #ifdefs are needed to prevent compile errors until the entire ARCH_DAVINCI is converted. Also clean up the #includes since we are adding some here. Some CFGCHIP macros were removed because we are now including linux/mfd/da8xx-cfgchip.h which defines the same values. Reviewed-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: David Lechner <david@lechnology.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2018-05-19 00:48:08 +08:00
#include <linux/cpufreq.h>
ARM: gpio: convert includes of mach/gpio.h and asm/gpio.h to linux/gpio.h Convert arch/arm includes of mach/gpio.h and asm/gpio.h to linux/gpio.h before we start consolidating the individual platform implementations of the gpio header files. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-07-26 17:53:52 +08:00
#include <linux/gpio.h>
davinci: Add base DA850/OMAP-L138 SoC support The DA850/OMAP-L138 is a new SoC from TI in the same family as DA830/OMAP-L137. Major changes include better support for power management, support for SATA devices and McBSP (same IP as DM644x). DA850/OMAP-L138 documents are available at http://focus.ti.com/docs/prod/folders/print/omap-l138.html. Signed-off-by: Sudhakar Rajashekhara <sudhakar.raj@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2009-07-16 18:41:54 +08:00
#include <linux/init.h>
ARM: davinci: da850: add new clock init using common clock framework This adds the new board-specific clock init in mach-davinci/da850.c using the new common clock framework drivers. The #ifdefs are needed to prevent compile errors until the entire ARCH_DAVINCI is converted. Also clean up the #includes since we are adding some here. Some CFGCHIP macros were removed because we are now including linux/mfd/da8xx-cfgchip.h which defines the same values. Reviewed-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: David Lechner <david@lechnology.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2018-05-19 00:48:08 +08:00
#include <linux/mfd/da8xx-cfgchip.h>
#include <linux/platform_data/clk-da8xx-cfgchip.h>
#include <linux/platform_data/clk-davinci-pll.h>
#include <linux/platform_data/gpio-davinci.h>
davinci: Add base DA850/OMAP-L138 SoC support The DA850/OMAP-L138 is a new SoC from TI in the same family as DA830/OMAP-L137. Major changes include better support for power management, support for SATA devices and McBSP (same IP as DM644x). DA850/OMAP-L138 documents are available at http://focus.ti.com/docs/prod/folders/print/omap-l138.html. Signed-off-by: Sudhakar Rajashekhara <sudhakar.raj@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2009-07-16 18:41:54 +08:00
#include <linux/platform_device.h>
ARM: davinci: da850: add new clock init using common clock framework This adds the new board-specific clock init in mach-davinci/da850.c using the new common clock framework drivers. The #ifdefs are needed to prevent compile errors until the entire ARCH_DAVINCI is converted. Also clean up the #includes since we are adding some here. Some CFGCHIP macros were removed because we are now including linux/mfd/da8xx-cfgchip.h which defines the same values. Reviewed-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: David Lechner <david@lechnology.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2018-05-19 00:48:08 +08:00
#include <linux/regmap.h>
davinci: DA850/OMAP-L138: add voltage regulation support This patch adds support for regulating the CVDD voltage for the DA850/OMAP-L138 platform. The CVDD min and max values for each OPP have been obtained from section 5.2 "Recommended Operating Conditions" of SPRS586 Signed-off-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2009-09-22 23:44:02 +08:00
#include <linux/regulator/consumer.h>
davinci: Add base DA850/OMAP-L138 SoC support The DA850/OMAP-L138 is a new SoC from TI in the same family as DA830/OMAP-L137. Major changes include better support for power management, support for SATA devices and McBSP (same IP as DM644x). DA850/OMAP-L138 documents are available at http://focus.ti.com/docs/prod/folders/print/omap-l138.html. Signed-off-by: Sudhakar Rajashekhara <sudhakar.raj@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2009-07-16 18:41:54 +08:00
#include <asm/mach/map.h>
#include <mach/common.h>
davinci: DA850/OMAP-L138: add frequency scaling support Adds basic frequency scaling support for DA850/OMAP-L138. Currently, frequency scaling only on PLL0 is supported. No scaling of PLL1 as yet. Peripherals like MMC/SD which have a clock input synchronous with ARM clock will not work well since the clock will change behind their backs. Support for notification to such devices to adjust themselves to the new frequency will be added in later patches. Current defconfigs keep CPUFreq disabled so it will not affect normal operation. The OPP defintions assume clock input of 24MHz to the SoC. This is inline with hardcoding of input frequency in the <soc>.c files. At some point this will need to move into board dependent code as new boards appear with a different reference clock. Tested on OMAP-L138 EVM with ondemand governer and a shell script to vary processor load. Signed-off-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2009-09-22 23:44:01 +08:00
#include <mach/cpufreq.h>
ARM: davinci: da850: add new clock init using common clock framework This adds the new board-specific clock init in mach-davinci/da850.c using the new common clock framework drivers. The #ifdefs are needed to prevent compile errors until the entire ARCH_DAVINCI is converted. Also clean up the #includes since we are adding some here. Some CFGCHIP macros were removed because we are now including linux/mfd/da8xx-cfgchip.h which defines the same values. Reviewed-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: David Lechner <david@lechnology.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2018-05-19 00:48:08 +08:00
#include <mach/cputype.h>
#include <mach/da8xx.h>
#include <mach/irqs.h>
davinci: da850/omap-l138: add support for SoC suspend This patch adds support for registering for suspend-to-RAM functionality on da850/omap-l138 SoCs. da850 supports wakeup based on external event and RTC alarm. Currently only RTC alarm based wakeup is supported. Support for wakeup based on external event will be added as later improvements. For scheduling an alarm event on RTC some useful code is present in Documentation/rtc.txt Signed-off-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2009-12-17 20:59:32 +08:00
#include <mach/pm.h>
ARM: davinci: da850: add new clock init using common clock framework This adds the new board-specific clock init in mach-davinci/da850.c using the new common clock framework drivers. The #ifdefs are needed to prevent compile errors until the entire ARCH_DAVINCI is converted. Also clean up the #includes since we are adding some here. Some CFGCHIP macros were removed because we are now including linux/mfd/da8xx-cfgchip.h which defines the same values. Reviewed-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: David Lechner <david@lechnology.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2018-05-19 00:48:08 +08:00
#include <mach/time.h>
davinci: Add base DA850/OMAP-L138 SoC support The DA850/OMAP-L138 is a new SoC from TI in the same family as DA830/OMAP-L137. Major changes include better support for power management, support for SATA devices and McBSP (same IP as DM644x). DA850/OMAP-L138 documents are available at http://focus.ti.com/docs/prod/folders/print/omap-l138.html. Signed-off-by: Sudhakar Rajashekhara <sudhakar.raj@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2009-07-16 18:41:54 +08:00
#include "mux.h"
#define DA850_PLL1_BASE 0x01e1a000
#define DA850_TIMER64P2_BASE 0x01f0c000
#define DA850_TIMER64P3_BASE 0x01f0d000
#define DA850_REF_FREQ 24000000
/*
* Device specific mux setup
*
* soc description mux mode mode mux dbg
* reg offset mask mode
*/
static const struct mux_config da850_pins[] = {
#ifdef CONFIG_DAVINCI_MUX
/* UART0 function */
MUX_CFG(DA850, NUART0_CTS, 3, 24, 15, 2, false)
MUX_CFG(DA850, NUART0_RTS, 3, 28, 15, 2, false)
MUX_CFG(DA850, UART0_RXD, 3, 16, 15, 2, false)
MUX_CFG(DA850, UART0_TXD, 3, 20, 15, 2, false)
/* UART1 function */
MUX_CFG(DA850, UART1_RXD, 4, 24, 15, 2, false)
MUX_CFG(DA850, UART1_TXD, 4, 28, 15, 2, false)
/* UART2 function */
MUX_CFG(DA850, UART2_RXD, 4, 16, 15, 2, false)
MUX_CFG(DA850, UART2_TXD, 4, 20, 15, 2, false)
/* I2C1 function */
MUX_CFG(DA850, I2C1_SCL, 4, 16, 15, 4, false)
MUX_CFG(DA850, I2C1_SDA, 4, 20, 15, 4, false)
/* I2C0 function */
MUX_CFG(DA850, I2C0_SDA, 4, 12, 15, 2, false)
MUX_CFG(DA850, I2C0_SCL, 4, 8, 15, 2, false)
davinci: Add EMAC support for da850/omap-l138 Ethernet Media Access Controller (EMAC) on da850/omap-l138 supports 10/100 Mbps operation. It also supports Media Independent Interface (MII) and Reduced Media Independent Interface (RMII) to physical layer (PHY). Phy which supports MII is present on the DA850/OMAP-L138 base board and Phy supporting RMII is present on the UI card. This patch adds support only for the MII Phy. Support for RMII Phy will be added later. Signed-off-by: Sudhakar Rajashekhara <sudhakar.raj@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2009-07-17 16:47:10 +08:00
/* EMAC function */
MUX_CFG(DA850, MII_TXEN, 2, 4, 15, 8, false)
MUX_CFG(DA850, MII_TXCLK, 2, 8, 15, 8, false)
MUX_CFG(DA850, MII_COL, 2, 12, 15, 8, false)
MUX_CFG(DA850, MII_TXD_3, 2, 16, 15, 8, false)
MUX_CFG(DA850, MII_TXD_2, 2, 20, 15, 8, false)
MUX_CFG(DA850, MII_TXD_1, 2, 24, 15, 8, false)
MUX_CFG(DA850, MII_TXD_0, 2, 28, 15, 8, false)
MUX_CFG(DA850, MII_RXCLK, 3, 0, 15, 8, false)
MUX_CFG(DA850, MII_RXDV, 3, 4, 15, 8, false)
MUX_CFG(DA850, MII_RXER, 3, 8, 15, 8, false)
MUX_CFG(DA850, MII_CRS, 3, 12, 15, 8, false)
MUX_CFG(DA850, MII_RXD_3, 3, 16, 15, 8, false)
MUX_CFG(DA850, MII_RXD_2, 3, 20, 15, 8, false)
MUX_CFG(DA850, MII_RXD_1, 3, 24, 15, 8, false)
MUX_CFG(DA850, MII_RXD_0, 3, 28, 15, 8, false)
davinci: Configure MDIO pins for EMAC Earlier patch which adds EMAC support for da850/omap-l138 was not configuring the MDIO pins. Ethernet was working fine with the earlier patch, because the MDIO pins were configured from the boot loader. This patch removes that dependency. Also, this patch populates a member in the emac clk structure to say that EMAC LPSC sits on controller 1. Signed-off-by: Sudhakar Rajashekhara <sudhakar.raj@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2009-08-11 23:10:50 +08:00
MUX_CFG(DA850, MDIO_CLK, 4, 0, 15, 8, false)
MUX_CFG(DA850, MDIO_D, 4, 4, 15, 8, false)
davinci: RMII support for DA850/OMAP-L138 EVM DA850/OMAP-L138 EVM has a RMII Ethernet PHY on the UI daughter card. The PHY is enabled by proper programming of the IO Expander (TCA6416) ports. Also for RMII PHY to work, the MDIO clock of MII PHY has to be disabled since both the PHYs have the same address. This is done via the GPIO2[6] pin. This patch adds support for RMII PHY. This patch also adds a menuconfig option to select one or no peripheral connected to expander. Currently, sub-options in this menu are RMII and no peripheral.This menuconfig option is similar to the one present for UI card on DA830/OMAP-L137 EVM. Signed-off-by: Chaithrika U S <chaithrika@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2009-10-01 05:00:53 +08:00
MUX_CFG(DA850, RMII_TXD_0, 14, 12, 15, 8, false)
MUX_CFG(DA850, RMII_TXD_1, 14, 8, 15, 8, false)
MUX_CFG(DA850, RMII_TXEN, 14, 16, 15, 8, false)
MUX_CFG(DA850, RMII_CRS_DV, 15, 4, 15, 8, false)
MUX_CFG(DA850, RMII_RXD_0, 14, 24, 15, 8, false)
MUX_CFG(DA850, RMII_RXD_1, 14, 20, 15, 8, false)
MUX_CFG(DA850, RMII_RXER, 14, 28, 15, 8, false)
MUX_CFG(DA850, RMII_MHZ_50_CLK, 15, 0, 15, 0, false)
davinci: Audio support for DA850/OMAP-L138 EVM Define resources for McASP used on DA850/OMAP-L138 EVM, add platform device defintion and Pin Mux configurations. Signed-off-by: Chaithrika U S <chaithrika@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2009-08-12 05:03:25 +08:00
/* McASP function */
MUX_CFG(DA850, ACLKR, 0, 0, 15, 1, false)
MUX_CFG(DA850, ACLKX, 0, 4, 15, 1, false)
MUX_CFG(DA850, AFSR, 0, 8, 15, 1, false)
MUX_CFG(DA850, AFSX, 0, 12, 15, 1, false)
MUX_CFG(DA850, AHCLKR, 0, 16, 15, 1, false)
MUX_CFG(DA850, AHCLKX, 0, 20, 15, 1, false)
MUX_CFG(DA850, AMUTE, 0, 24, 15, 1, false)
MUX_CFG(DA850, AXR_15, 1, 0, 15, 1, false)
MUX_CFG(DA850, AXR_14, 1, 4, 15, 1, false)
MUX_CFG(DA850, AXR_13, 1, 8, 15, 1, false)
MUX_CFG(DA850, AXR_12, 1, 12, 15, 1, false)
MUX_CFG(DA850, AXR_11, 1, 16, 15, 1, false)
MUX_CFG(DA850, AXR_10, 1, 20, 15, 1, false)
MUX_CFG(DA850, AXR_9, 1, 24, 15, 1, false)
MUX_CFG(DA850, AXR_8, 1, 28, 15, 1, false)
MUX_CFG(DA850, AXR_7, 2, 0, 15, 1, false)
MUX_CFG(DA850, AXR_6, 2, 4, 15, 1, false)
MUX_CFG(DA850, AXR_5, 2, 8, 15, 1, false)
MUX_CFG(DA850, AXR_4, 2, 12, 15, 1, false)
MUX_CFG(DA850, AXR_3, 2, 16, 15, 1, false)
MUX_CFG(DA850, AXR_2, 2, 20, 15, 1, false)
MUX_CFG(DA850, AXR_1, 2, 24, 15, 1, false)
MUX_CFG(DA850, AXR_0, 2, 28, 15, 1, false)
davinci: Add platform support for da850/omap-l138 GLCD This patch adds platform support for the graphic display (Sharp LK043T1DG01) found on DA850/OMAP-L138 based EVM. Signed-off-by: Sudhakar Rajashekhara <sudhakar.raj@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2009-08-14 02:33:14 +08:00
/* LCD function */
MUX_CFG(DA850, LCD_D_7, 16, 8, 15, 2, false)
MUX_CFG(DA850, LCD_D_6, 16, 12, 15, 2, false)
MUX_CFG(DA850, LCD_D_5, 16, 16, 15, 2, false)
MUX_CFG(DA850, LCD_D_4, 16, 20, 15, 2, false)
MUX_CFG(DA850, LCD_D_3, 16, 24, 15, 2, false)
MUX_CFG(DA850, LCD_D_2, 16, 28, 15, 2, false)
MUX_CFG(DA850, LCD_D_1, 17, 0, 15, 2, false)
MUX_CFG(DA850, LCD_D_0, 17, 4, 15, 2, false)
MUX_CFG(DA850, LCD_D_15, 17, 8, 15, 2, false)
MUX_CFG(DA850, LCD_D_14, 17, 12, 15, 2, false)
MUX_CFG(DA850, LCD_D_13, 17, 16, 15, 2, false)
MUX_CFG(DA850, LCD_D_12, 17, 20, 15, 2, false)
MUX_CFG(DA850, LCD_D_11, 17, 24, 15, 2, false)
MUX_CFG(DA850, LCD_D_10, 17, 28, 15, 2, false)
MUX_CFG(DA850, LCD_D_9, 18, 0, 15, 2, false)
MUX_CFG(DA850, LCD_D_8, 18, 4, 15, 2, false)
MUX_CFG(DA850, LCD_PCLK, 18, 24, 15, 2, false)
MUX_CFG(DA850, LCD_HSYNC, 19, 0, 15, 2, false)
MUX_CFG(DA850, LCD_VSYNC, 19, 4, 15, 2, false)
MUX_CFG(DA850, NLCD_AC_ENB_CS, 19, 24, 15, 2, false)
davinci: Add MMC/SD support for da850/omap-l138 There are two instances of MMC/SD on da850/omap-l138. Connector for the first instance is available on the EVM. This patch adds support for this instance. This patch also adds support for card detect and write protect switches on da850/omap-l138 EVM. Signed-off-by: Sudhakar Rajashekhara <sudhakar.raj@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2009-08-14 03:16:23 +08:00
/* MMC/SD0 function */
MUX_CFG(DA850, MMCSD0_DAT_0, 10, 8, 15, 2, false)
MUX_CFG(DA850, MMCSD0_DAT_1, 10, 12, 15, 2, false)
MUX_CFG(DA850, MMCSD0_DAT_2, 10, 16, 15, 2, false)
MUX_CFG(DA850, MMCSD0_DAT_3, 10, 20, 15, 2, false)
MUX_CFG(DA850, MMCSD0_CLK, 10, 0, 15, 2, false)
MUX_CFG(DA850, MMCSD0_CMD, 10, 4, 15, 2, false)
ARM: davinci: DA850: Add MMC/SD1 pinmux configuration AM18x has two MMC slots. Add the required pinmux configuration for the second slot. Signed-off-by: Ido Yariv <ido@wizery.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2011-07-10 21:14:37 +08:00
/* MMC/SD1 function */
MUX_CFG(DA850, MMCSD1_DAT_0, 18, 8, 15, 2, false)
MUX_CFG(DA850, MMCSD1_DAT_1, 19, 16, 15, 2, false)
MUX_CFG(DA850, MMCSD1_DAT_2, 19, 12, 15, 2, false)
MUX_CFG(DA850, MMCSD1_DAT_3, 19, 8, 15, 2, false)
MUX_CFG(DA850, MMCSD1_CLK, 18, 12, 15, 2, false)
MUX_CFG(DA850, MMCSD1_CMD, 18, 16, 15, 2, false)
davinci: Add NAND flash support for DA850/OMAP-L138 This patch adds platform data for the 512MB NAND Flash found on DA850/OMAP-L138 EVM. Currently it supports only 1-bit ECC. Signed-off-by: Sudhakar Rajashekhara <sudhakar.raj@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2009-08-14 04:21:11 +08:00
/* EMIF2.5/EMIFA function */
MUX_CFG(DA850, EMA_D_7, 9, 0, 15, 1, false)
MUX_CFG(DA850, EMA_D_6, 9, 4, 15, 1, false)
MUX_CFG(DA850, EMA_D_5, 9, 8, 15, 1, false)
MUX_CFG(DA850, EMA_D_4, 9, 12, 15, 1, false)
MUX_CFG(DA850, EMA_D_3, 9, 16, 15, 1, false)
MUX_CFG(DA850, EMA_D_2, 9, 20, 15, 1, false)
MUX_CFG(DA850, EMA_D_1, 9, 24, 15, 1, false)
MUX_CFG(DA850, EMA_D_0, 9, 28, 15, 1, false)
MUX_CFG(DA850, EMA_A_1, 12, 24, 15, 1, false)
MUX_CFG(DA850, EMA_A_2, 12, 20, 15, 1, false)
MUX_CFG(DA850, NEMA_CS_3, 7, 4, 15, 1, false)
MUX_CFG(DA850, NEMA_CS_4, 7, 8, 15, 1, false)
MUX_CFG(DA850, NEMA_WE, 7, 16, 15, 1, false)
MUX_CFG(DA850, NEMA_OE, 7, 20, 15, 1, false)
davinci: Add NOR flash support for da850/omap-l138 This patch adds platform data for the 8MB NOR flash found on da850/omap-l138 EVM. Both NOR and NAND can co-exist on da850/omap-l138 as they are using different chip selects. Signed-off-by: Sudhakar Rajashekhara <sudhakar.raj@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2009-08-14 05:36:25 +08:00
MUX_CFG(DA850, EMA_A_0, 12, 28, 15, 1, false)
MUX_CFG(DA850, EMA_A_3, 12, 16, 15, 1, false)
MUX_CFG(DA850, EMA_A_4, 12, 12, 15, 1, false)
MUX_CFG(DA850, EMA_A_5, 12, 8, 15, 1, false)
MUX_CFG(DA850, EMA_A_6, 12, 4, 15, 1, false)
MUX_CFG(DA850, EMA_A_7, 12, 0, 15, 1, false)
MUX_CFG(DA850, EMA_A_8, 11, 28, 15, 1, false)
MUX_CFG(DA850, EMA_A_9, 11, 24, 15, 1, false)
MUX_CFG(DA850, EMA_A_10, 11, 20, 15, 1, false)
MUX_CFG(DA850, EMA_A_11, 11, 16, 15, 1, false)
MUX_CFG(DA850, EMA_A_12, 11, 12, 15, 1, false)
MUX_CFG(DA850, EMA_A_13, 11, 8, 15, 1, false)
MUX_CFG(DA850, EMA_A_14, 11, 4, 15, 1, false)
MUX_CFG(DA850, EMA_A_15, 11, 0, 15, 1, false)
MUX_CFG(DA850, EMA_A_16, 10, 28, 15, 1, false)
MUX_CFG(DA850, EMA_A_17, 10, 24, 15, 1, false)
MUX_CFG(DA850, EMA_A_18, 10, 20, 15, 1, false)
MUX_CFG(DA850, EMA_A_19, 10, 16, 15, 1, false)
MUX_CFG(DA850, EMA_A_20, 10, 12, 15, 1, false)
MUX_CFG(DA850, EMA_A_21, 10, 8, 15, 1, false)
MUX_CFG(DA850, EMA_A_22, 10, 4, 15, 1, false)
MUX_CFG(DA850, EMA_A_23, 10, 0, 15, 1, false)
MUX_CFG(DA850, EMA_D_8, 8, 28, 15, 1, false)
MUX_CFG(DA850, EMA_D_9, 8, 24, 15, 1, false)
MUX_CFG(DA850, EMA_D_10, 8, 20, 15, 1, false)
MUX_CFG(DA850, EMA_D_11, 8, 16, 15, 1, false)
MUX_CFG(DA850, EMA_D_12, 8, 12, 15, 1, false)
MUX_CFG(DA850, EMA_D_13, 8, 8, 15, 1, false)
MUX_CFG(DA850, EMA_D_14, 8, 4, 15, 1, false)
MUX_CFG(DA850, EMA_D_15, 8, 0, 15, 1, false)
MUX_CFG(DA850, EMA_BA_1, 5, 24, 15, 1, false)
MUX_CFG(DA850, EMA_CLK, 6, 0, 15, 1, false)
MUX_CFG(DA850, EMA_WAIT_1, 6, 24, 15, 1, false)
MUX_CFG(DA850, NEMA_CS_2, 7, 0, 15, 1, false)
davinci: Add platform support for da850/omap-l138 GLCD This patch adds platform support for the graphic display (Sharp LK043T1DG01) found on DA850/OMAP-L138 based EVM. Signed-off-by: Sudhakar Rajashekhara <sudhakar.raj@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2009-08-14 02:33:14 +08:00
/* GPIO function */
davinci: MMC/SD and USB-OHCI configuration for Omapl138-Hawkboard This patch defines Pin Mux configuration to enable MMC/SD and USB-OHCI on the Hawkboard-L138 system Signed-off-by: Victor Rodriguez <vm.rod25@gmail.com> Tested-by: Rene Gonzalez <renegs.2378@gmail.com> Acked-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Kevin Hilman <khilman@ti.com>
2010-12-28 06:43:10 +08:00
MUX_CFG(DA850, GPIO2_4, 6, 12, 15, 8, false)
davinci: RMII support for DA850/OMAP-L138 EVM DA850/OMAP-L138 EVM has a RMII Ethernet PHY on the UI daughter card. The PHY is enabled by proper programming of the IO Expander (TCA6416) ports. Also for RMII PHY to work, the MDIO clock of MII PHY has to be disabled since both the PHYs have the same address. This is done via the GPIO2[6] pin. This patch adds support for RMII PHY. This patch also adds a menuconfig option to select one or no peripheral connected to expander. Currently, sub-options in this menu are RMII and no peripheral.This menuconfig option is similar to the one present for UI card on DA830/OMAP-L137 EVM. Signed-off-by: Chaithrika U S <chaithrika@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2009-10-01 05:00:53 +08:00
MUX_CFG(DA850, GPIO2_6, 6, 4, 15, 8, false)
davinci: Correct the GPIO number for LCD panel power On the latest DA850/OMAP-L138 EVM (Beta) the GPIO pin number of LCD panel power has changed. This patch takes care of this change. Software will support only Beta versions of DA850/OMAP-L138 EVM. In the process, add the missing entry for data pin 0 and remove the GPIO specific pins from da850_lcdcntl_pins structure. EVM specific muxing for LCD is being done in the board file now. Signed-off-by: Sudhakar Rajashekhara <sudhakar.raj@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2009-09-16 05:46:14 +08:00
MUX_CFG(DA850, GPIO2_8, 5, 28, 15, 8, false)
davinci: Add platform support for da850/omap-l138 GLCD This patch adds platform support for the graphic display (Sharp LK043T1DG01) found on DA850/OMAP-L138 based EVM. Signed-off-by: Sudhakar Rajashekhara <sudhakar.raj@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2009-08-14 02:33:14 +08:00
MUX_CFG(DA850, GPIO2_15, 5, 0, 15, 8, false)
davinci: MMC/SD and USB-OHCI configuration for Omapl138-Hawkboard This patch defines Pin Mux configuration to enable MMC/SD and USB-OHCI on the Hawkboard-L138 system Signed-off-by: Victor Rodriguez <vm.rod25@gmail.com> Tested-by: Rene Gonzalez <renegs.2378@gmail.com> Acked-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Kevin Hilman <khilman@ti.com>
2010-12-28 06:43:10 +08:00
MUX_CFG(DA850, GPIO3_12, 7, 12, 15, 8, false)
MUX_CFG(DA850, GPIO3_13, 7, 8, 15, 8, false)
davinci: Add MMC/SD support for da850/omap-l138 There are two instances of MMC/SD on da850/omap-l138. Connector for the first instance is available on the EVM. This patch adds support for this instance. This patch also adds support for card detect and write protect switches on da850/omap-l138 EVM. Signed-off-by: Sudhakar Rajashekhara <sudhakar.raj@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2009-08-14 03:16:23 +08:00
MUX_CFG(DA850, GPIO4_0, 10, 28, 15, 8, false)
MUX_CFG(DA850, GPIO4_1, 10, 24, 15, 8, false)
ARM: davinci: DA850: Add GPIO pinmux configuration for wl1271 The wl1271 daughter board makes use of a few GPIOs: GPIO6_9 is used for powering down/up the WLAN functionality. GPIO6_10 is used as an input IRQ line from the WLAN chip. Add the required pinmux configuration for these GPIOs. Signed-off-by: Ido Yariv <ido@wizery.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2011-07-10 21:14:38 +08:00
MUX_CFG(DA850, GPIO6_9, 13, 24, 15, 8, false)
MUX_CFG(DA850, GPIO6_10, 13, 20, 15, 8, false)
davinci: MMC/SD and USB-OHCI configuration for Omapl138-Hawkboard This patch defines Pin Mux configuration to enable MMC/SD and USB-OHCI on the Hawkboard-L138 system Signed-off-by: Victor Rodriguez <vm.rod25@gmail.com> Tested-by: Rene Gonzalez <renegs.2378@gmail.com> Acked-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Kevin Hilman <khilman@ti.com>
2010-12-28 06:43:10 +08:00
MUX_CFG(DA850, GPIO6_13, 13, 8, 15, 8, false)
davinci: da850/omap-l138: add support for SoC suspend This patch adds support for registering for suspend-to-RAM functionality on da850/omap-l138 SoCs. da850 supports wakeup based on external event and RTC alarm. Currently only RTC alarm based wakeup is supported. Support for wakeup based on external event will be added as later improvements. For scheduling an alarm event on RTC some useful code is present in Documentation/rtc.txt Signed-off-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2009-12-17 20:59:32 +08:00
MUX_CFG(DA850, RTC_ALARM, 0, 28, 15, 2, false)
[media] ARM: davinci: da850: Add SoC related definitions for VPIF Add clock, pin mux definitions and registration function for VPIF capture and display driver on DA850/OMAP-L138 SoC. Signed-off-by: Manjunath Hadli <manjunath.hadli@ti.com> Signed-off-by: Lad, Prabhakar <prabhakar.lad@ti.com> Acked-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-01-23 17:17:24 +08:00
/* VPIF Capture */
MUX_CFG(DA850, VPIF_DIN0, 15, 4, 15, 1, false)
MUX_CFG(DA850, VPIF_DIN1, 15, 0, 15, 1, false)
MUX_CFG(DA850, VPIF_DIN2, 14, 28, 15, 1, false)
MUX_CFG(DA850, VPIF_DIN3, 14, 24, 15, 1, false)
MUX_CFG(DA850, VPIF_DIN4, 14, 20, 15, 1, false)
MUX_CFG(DA850, VPIF_DIN5, 14, 16, 15, 1, false)
MUX_CFG(DA850, VPIF_DIN6, 14, 12, 15, 1, false)
MUX_CFG(DA850, VPIF_DIN7, 14, 8, 15, 1, false)
MUX_CFG(DA850, VPIF_DIN8, 16, 4, 15, 1, false)
MUX_CFG(DA850, VPIF_DIN9, 16, 0, 15, 1, false)
MUX_CFG(DA850, VPIF_DIN10, 15, 28, 15, 1, false)
MUX_CFG(DA850, VPIF_DIN11, 15, 24, 15, 1, false)
MUX_CFG(DA850, VPIF_DIN12, 15, 20, 15, 1, false)
MUX_CFG(DA850, VPIF_DIN13, 15, 16, 15, 1, false)
MUX_CFG(DA850, VPIF_DIN14, 15, 12, 15, 1, false)
MUX_CFG(DA850, VPIF_DIN15, 15, 8, 15, 1, false)
MUX_CFG(DA850, VPIF_CLKIN0, 14, 0, 15, 1, false)
MUX_CFG(DA850, VPIF_CLKIN1, 14, 4, 15, 1, false)
MUX_CFG(DA850, VPIF_CLKIN2, 19, 8, 15, 1, false)
MUX_CFG(DA850, VPIF_CLKIN3, 19, 16, 15, 1, false)
/* VPIF Display */
MUX_CFG(DA850, VPIF_DOUT0, 17, 4, 15, 1, false)
MUX_CFG(DA850, VPIF_DOUT1, 17, 0, 15, 1, false)
MUX_CFG(DA850, VPIF_DOUT2, 16, 28, 15, 1, false)
MUX_CFG(DA850, VPIF_DOUT3, 16, 24, 15, 1, false)
MUX_CFG(DA850, VPIF_DOUT4, 16, 20, 15, 1, false)
MUX_CFG(DA850, VPIF_DOUT5, 16, 16, 15, 1, false)
MUX_CFG(DA850, VPIF_DOUT6, 16, 12, 15, 1, false)
MUX_CFG(DA850, VPIF_DOUT7, 16, 8, 15, 1, false)
MUX_CFG(DA850, VPIF_DOUT8, 18, 4, 15, 1, false)
MUX_CFG(DA850, VPIF_DOUT9, 18, 0, 15, 1, false)
MUX_CFG(DA850, VPIF_DOUT10, 17, 28, 15, 1, false)
MUX_CFG(DA850, VPIF_DOUT11, 17, 24, 15, 1, false)
MUX_CFG(DA850, VPIF_DOUT12, 17, 20, 15, 1, false)
MUX_CFG(DA850, VPIF_DOUT13, 17, 16, 15, 1, false)
MUX_CFG(DA850, VPIF_DOUT14, 17, 12, 15, 1, false)
MUX_CFG(DA850, VPIF_DOUT15, 17, 8, 15, 1, false)
MUX_CFG(DA850, VPIF_CLKO2, 19, 12, 15, 1, false)
MUX_CFG(DA850, VPIF_CLKO3, 19, 20, 15, 1, false)
davinci: Add base DA850/OMAP-L138 SoC support The DA850/OMAP-L138 is a new SoC from TI in the same family as DA830/OMAP-L137. Major changes include better support for power management, support for SATA devices and McBSP (same IP as DM644x). DA850/OMAP-L138 documents are available at http://focus.ti.com/docs/prod/folders/print/omap-l138.html. Signed-off-by: Sudhakar Rajashekhara <sudhakar.raj@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2009-07-16 18:41:54 +08:00
#endif
};
sections: fix section conflicts in arch/arm/ Signed-off-by: Andi Kleen <ak@linux.intel.com> Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-10-05 08:11:28 +08:00
const short da850_i2c0_pins[] __initconst = {
davinci: Add base DA850/OMAP-L138 SoC support The DA850/OMAP-L138 is a new SoC from TI in the same family as DA830/OMAP-L137. Major changes include better support for power management, support for SATA devices and McBSP (same IP as DM644x). DA850/OMAP-L138 documents are available at http://focus.ti.com/docs/prod/folders/print/omap-l138.html. Signed-off-by: Sudhakar Rajashekhara <sudhakar.raj@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2009-07-16 18:41:54 +08:00
DA850_I2C0_SDA, DA850_I2C0_SCL,
-1
};
sections: fix section conflicts in arch/arm/ Signed-off-by: Andi Kleen <ak@linux.intel.com> Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-10-05 08:11:28 +08:00
const short da850_i2c1_pins[] __initconst = {
davinci: Add base DA850/OMAP-L138 SoC support The DA850/OMAP-L138 is a new SoC from TI in the same family as DA830/OMAP-L137. Major changes include better support for power management, support for SATA devices and McBSP (same IP as DM644x). DA850/OMAP-L138 documents are available at http://focus.ti.com/docs/prod/folders/print/omap-l138.html. Signed-off-by: Sudhakar Rajashekhara <sudhakar.raj@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2009-07-16 18:41:54 +08:00
DA850_I2C1_SCL, DA850_I2C1_SDA,
-1
};
sections: fix section conflicts in arch/arm/ Signed-off-by: Andi Kleen <ak@linux.intel.com> Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-10-05 08:11:28 +08:00
const short da850_lcdcntl_pins[] __initconst = {
davinci: Correct the GPIO number for LCD panel power On the latest DA850/OMAP-L138 EVM (Beta) the GPIO pin number of LCD panel power has changed. This patch takes care of this change. Software will support only Beta versions of DA850/OMAP-L138 EVM. In the process, add the missing entry for data pin 0 and remove the GPIO specific pins from da850_lcdcntl_pins structure. EVM specific muxing for LCD is being done in the board file now. Signed-off-by: Sudhakar Rajashekhara <sudhakar.raj@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2009-09-16 05:46:14 +08:00
DA850_LCD_D_0, DA850_LCD_D_1, DA850_LCD_D_2, DA850_LCD_D_3,
DA850_LCD_D_4, DA850_LCD_D_5, DA850_LCD_D_6, DA850_LCD_D_7,
DA850_LCD_D_8, DA850_LCD_D_9, DA850_LCD_D_10, DA850_LCD_D_11,
DA850_LCD_D_12, DA850_LCD_D_13, DA850_LCD_D_14, DA850_LCD_D_15,
DA850_LCD_PCLK, DA850_LCD_HSYNC, DA850_LCD_VSYNC, DA850_NLCD_AC_ENB_CS,
davinci: Add platform support for da850/omap-l138 GLCD This patch adds platform support for the graphic display (Sharp LK043T1DG01) found on DA850/OMAP-L138 based EVM. Signed-off-by: Sudhakar Rajashekhara <sudhakar.raj@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2009-08-14 02:33:14 +08:00
-1
};
ARM: appropriate __init annotation for const data Init data marked const should be annotated with __initconst for correctness and not __initdata. In some cases the array gathering references to that data has to be marked const as well. This fixes LTO builds that otherwise fail with section mismatch errors. Signed-off-by: Nicolas Pitre <nico@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2015-07-28 06:27:52 +08:00
const short da850_vpif_capture_pins[] __initconst = {
[media] ARM: davinci: da850: Add SoC related definitions for VPIF Add clock, pin mux definitions and registration function for VPIF capture and display driver on DA850/OMAP-L138 SoC. Signed-off-by: Manjunath Hadli <manjunath.hadli@ti.com> Signed-off-by: Lad, Prabhakar <prabhakar.lad@ti.com> Acked-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-01-23 17:17:24 +08:00
DA850_VPIF_DIN0, DA850_VPIF_DIN1, DA850_VPIF_DIN2, DA850_VPIF_DIN3,
DA850_VPIF_DIN4, DA850_VPIF_DIN5, DA850_VPIF_DIN6, DA850_VPIF_DIN7,
DA850_VPIF_DIN8, DA850_VPIF_DIN9, DA850_VPIF_DIN10, DA850_VPIF_DIN11,
DA850_VPIF_DIN12, DA850_VPIF_DIN13, DA850_VPIF_DIN14, DA850_VPIF_DIN15,
DA850_VPIF_CLKIN0, DA850_VPIF_CLKIN1, DA850_VPIF_CLKIN2,
DA850_VPIF_CLKIN3,
-1
};
ARM: appropriate __init annotation for const data Init data marked const should be annotated with __initconst for correctness and not __initdata. In some cases the array gathering references to that data has to be marked const as well. This fixes LTO builds that otherwise fail with section mismatch errors. Signed-off-by: Nicolas Pitre <nico@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2015-07-28 06:27:52 +08:00
const short da850_vpif_display_pins[] __initconst = {
[media] ARM: davinci: da850: Add SoC related definitions for VPIF Add clock, pin mux definitions and registration function for VPIF capture and display driver on DA850/OMAP-L138 SoC. Signed-off-by: Manjunath Hadli <manjunath.hadli@ti.com> Signed-off-by: Lad, Prabhakar <prabhakar.lad@ti.com> Acked-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-01-23 17:17:24 +08:00
DA850_VPIF_DOUT0, DA850_VPIF_DOUT1, DA850_VPIF_DOUT2, DA850_VPIF_DOUT3,
DA850_VPIF_DOUT4, DA850_VPIF_DOUT5, DA850_VPIF_DOUT6, DA850_VPIF_DOUT7,
DA850_VPIF_DOUT8, DA850_VPIF_DOUT9, DA850_VPIF_DOUT10,
DA850_VPIF_DOUT11, DA850_VPIF_DOUT12, DA850_VPIF_DOUT13,
DA850_VPIF_DOUT14, DA850_VPIF_DOUT15, DA850_VPIF_CLKO2,
DA850_VPIF_CLKO3,
-1
};
davinci: Add base DA850/OMAP-L138 SoC support The DA850/OMAP-L138 is a new SoC from TI in the same family as DA830/OMAP-L137. Major changes include better support for power management, support for SATA devices and McBSP (same IP as DM644x). DA850/OMAP-L138 documents are available at http://focus.ti.com/docs/prod/folders/print/omap-l138.html. Signed-off-by: Sudhakar Rajashekhara <sudhakar.raj@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2009-07-16 18:41:54 +08:00
/* FIQ are pri 0-1; otherwise 2-7, with 7 lowest priority */
static u8 da850_default_priorities[DA850_N_CP_INTC_IRQ] = {
[IRQ_DA8XX_COMMTX] = 7,
[IRQ_DA8XX_COMMRX] = 7,
[IRQ_DA8XX_NINT] = 7,
[IRQ_DA8XX_EVTOUT0] = 7,
[IRQ_DA8XX_EVTOUT1] = 7,
[IRQ_DA8XX_EVTOUT2] = 7,
[IRQ_DA8XX_EVTOUT3] = 7,
[IRQ_DA8XX_EVTOUT4] = 7,
[IRQ_DA8XX_EVTOUT5] = 7,
[IRQ_DA8XX_EVTOUT6] = 7,
[IRQ_DA8XX_EVTOUT7] = 7,
[IRQ_DA8XX_CCINT0] = 7,
[IRQ_DA8XX_CCERRINT] = 7,
[IRQ_DA8XX_TCERRINT0] = 7,
[IRQ_DA8XX_AEMIFINT] = 7,
[IRQ_DA8XX_I2CINT0] = 7,
[IRQ_DA8XX_MMCSDINT0] = 7,
[IRQ_DA8XX_MMCSDINT1] = 7,
[IRQ_DA8XX_ALLINT0] = 7,
[IRQ_DA8XX_RTC] = 7,
[IRQ_DA8XX_SPINT0] = 7,
[IRQ_DA8XX_TINT12_0] = 7,
[IRQ_DA8XX_TINT34_0] = 7,
[IRQ_DA8XX_TINT12_1] = 7,
[IRQ_DA8XX_TINT34_1] = 7,
[IRQ_DA8XX_UARTINT0] = 7,
[IRQ_DA8XX_KEYMGRINT] = 7,
[IRQ_DA850_MPUADDRERR0] = 7,
[IRQ_DA8XX_CHIPINT0] = 7,
[IRQ_DA8XX_CHIPINT1] = 7,
[IRQ_DA8XX_CHIPINT2] = 7,
[IRQ_DA8XX_CHIPINT3] = 7,
[IRQ_DA8XX_TCERRINT1] = 7,
[IRQ_DA8XX_C0_RX_THRESH_PULSE] = 7,
[IRQ_DA8XX_C0_RX_PULSE] = 7,
[IRQ_DA8XX_C0_TX_PULSE] = 7,
[IRQ_DA8XX_C0_MISC_PULSE] = 7,
[IRQ_DA8XX_C1_RX_THRESH_PULSE] = 7,
[IRQ_DA8XX_C1_RX_PULSE] = 7,
[IRQ_DA8XX_C1_TX_PULSE] = 7,
[IRQ_DA8XX_C1_MISC_PULSE] = 7,
[IRQ_DA8XX_MEMERR] = 7,
[IRQ_DA8XX_GPIO0] = 7,
[IRQ_DA8XX_GPIO1] = 7,
[IRQ_DA8XX_GPIO2] = 7,
[IRQ_DA8XX_GPIO3] = 7,
[IRQ_DA8XX_GPIO4] = 7,
[IRQ_DA8XX_GPIO5] = 7,
[IRQ_DA8XX_GPIO6] = 7,
[IRQ_DA8XX_GPIO7] = 7,
[IRQ_DA8XX_GPIO8] = 7,
[IRQ_DA8XX_I2CINT1] = 7,
[IRQ_DA8XX_LCDINT] = 7,
[IRQ_DA8XX_UARTINT1] = 7,
[IRQ_DA8XX_MCASPINT] = 7,
[IRQ_DA8XX_ALLINT1] = 7,
[IRQ_DA8XX_SPINT1] = 7,
[IRQ_DA8XX_UHPI_INT1] = 7,
[IRQ_DA8XX_USB_INT] = 7,
[IRQ_DA8XX_IRQN] = 7,
[IRQ_DA8XX_RWAKEUP] = 7,
[IRQ_DA8XX_UARTINT2] = 7,
[IRQ_DA8XX_DFTSSINT] = 7,
[IRQ_DA8XX_EHRPWM0] = 7,
[IRQ_DA8XX_EHRPWM0TZ] = 7,
[IRQ_DA8XX_EHRPWM1] = 7,
[IRQ_DA8XX_EHRPWM1TZ] = 7,
[IRQ_DA850_SATAINT] = 7,
[IRQ_DA850_TINTALL_2] = 7,
[IRQ_DA8XX_ECAP0] = 7,
[IRQ_DA8XX_ECAP1] = 7,
[IRQ_DA8XX_ECAP2] = 7,
[IRQ_DA850_MMCSDINT0_1] = 7,
[IRQ_DA850_MMCSDINT1_1] = 7,
[IRQ_DA850_T12CMPINT0_2] = 7,
[IRQ_DA850_T12CMPINT1_2] = 7,
[IRQ_DA850_T12CMPINT2_2] = 7,
[IRQ_DA850_T12CMPINT3_2] = 7,
[IRQ_DA850_T12CMPINT4_2] = 7,
[IRQ_DA850_T12CMPINT5_2] = 7,
[IRQ_DA850_T12CMPINT6_2] = 7,
[IRQ_DA850_T12CMPINT7_2] = 7,
[IRQ_DA850_T12CMPINT0_3] = 7,
[IRQ_DA850_T12CMPINT1_3] = 7,
[IRQ_DA850_T12CMPINT2_3] = 7,
[IRQ_DA850_T12CMPINT3_3] = 7,
[IRQ_DA850_T12CMPINT4_3] = 7,
[IRQ_DA850_T12CMPINT5_3] = 7,
[IRQ_DA850_T12CMPINT6_3] = 7,
[IRQ_DA850_T12CMPINT7_3] = 7,
[IRQ_DA850_RPIINT] = 7,
[IRQ_DA850_VPIFINT] = 7,
[IRQ_DA850_CCINT1] = 7,
[IRQ_DA850_CCERRINT1] = 7,
[IRQ_DA850_TCERRINT2] = 7,
[IRQ_DA850_TINTALL_3] = 7,
[IRQ_DA850_MCBSP0RINT] = 7,
[IRQ_DA850_MCBSP0XINT] = 7,
[IRQ_DA850_MCBSP1RINT] = 7,
[IRQ_DA850_MCBSP1XINT] = 7,
[IRQ_DA8XX_ARMCLKSTOPREQ] = 7,
};
static struct map_desc da850_io_desc[] = {
{
.virtual = IO_VIRT,
.pfn = __phys_to_pfn(IO_PHYS),
.length = IO_SIZE,
.type = MT_DEVICE
},
{
.virtual = DA8XX_CP_INTC_VIRT,
.pfn = __phys_to_pfn(DA8XX_CP_INTC_BASE),
.length = DA8XX_CP_INTC_SIZE,
.type = MT_DEVICE
},
};
/* Contents of JTAG ID register used to identify exact cpu type */
static struct davinci_id da850_ids[] = {
{
.variant = 0x0,
.part_no = 0xb7d1,
.manufacturer = 0x017, /* 0x02f >> 1 */
.cpu_id = DAVINCI_CPU_ID_DA850,
.name = "da850/omap-l138",
},
davinci: Add additional JTAG code for AM-1808 and OMAP-L138 Rev 2.0 SoCs From: Sudhakar Rajashekhara <sudhakar.raj@ti.com> The JTAG variant code for Rev-2.0 silicon of the OMAP-L138 has changed. In addition, the variant code for the AM-1808 SoC appears to match the Rev-2.0 code for the OMAP-L138. Add an additional entry to support these chips. This patch is originally from a patch on the arago project, here: http://arago-project.org/git/projects/?p=linux-omapl1.git;a=commit;h=6157618435e313a444cdf059702bd34036a6e2b7 Further information related to the need for this patch can be located at http://e2e.ti.com/support/embedded/f/354/p/67290/248486.aspx http://linux.davincidsp.com/pipermail/davinci-linux-open-source/2010-November/021224.html This patch was tested using an AM-1808 SoC on a MityARM-1808 SoM card. It was also tested using a Rev 1.0 silicon OMAP-L138 on a MityDSP-L138F card. Signed-off-by: Sudhakar Rajashekhara <sudhakar.raj@ti.com> Signed-off-by: Michael Williamson <michael.williamson@criticallink.com> Tested-by: Michael Williamson <michael.williamson@criticallink.com> Reported-by: Nicolas Luna <luna.id@gmail.com> Reviewed-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Kevin Hilman <khilman@ti.com>
2011-01-03 21:03:27 +08:00
{
.variant = 0x1,
.part_no = 0xb7d1,
.manufacturer = 0x017, /* 0x02f >> 1 */
.cpu_id = DAVINCI_CPU_ID_DA850,
.name = "da850/omap-l138/am18x",
},
davinci: Add base DA850/OMAP-L138 SoC support The DA850/OMAP-L138 is a new SoC from TI in the same family as DA830/OMAP-L137. Major changes include better support for power management, support for SATA devices and McBSP (same IP as DM644x). DA850/OMAP-L138 documents are available at http://focus.ti.com/docs/prod/folders/print/omap-l138.html. Signed-off-by: Sudhakar Rajashekhara <sudhakar.raj@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2009-07-16 18:41:54 +08:00
};
static struct davinci_timer_instance da850_timer_instance[4] = {
{
Davinci: timer - use ioremap() This patch eliminates IO_ADDRESS() usage for Davinci timer definitions. The timer code has correspondingly been modified to ioremap() MMRs instead. Signed-off-by: Cyril Chemparathy <cyril@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2010-05-08 05:06:35 +08:00
.base = DA8XX_TIMER64P0_BASE,
davinci: Add base DA850/OMAP-L138 SoC support The DA850/OMAP-L138 is a new SoC from TI in the same family as DA830/OMAP-L137. Major changes include better support for power management, support for SATA devices and McBSP (same IP as DM644x). DA850/OMAP-L138 documents are available at http://focus.ti.com/docs/prod/folders/print/omap-l138.html. Signed-off-by: Sudhakar Rajashekhara <sudhakar.raj@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2009-07-16 18:41:54 +08:00
.bottom_irq = IRQ_DA8XX_TINT12_0,
.top_irq = IRQ_DA8XX_TINT34_0,
},
{
Davinci: timer - use ioremap() This patch eliminates IO_ADDRESS() usage for Davinci timer definitions. The timer code has correspondingly been modified to ioremap() MMRs instead. Signed-off-by: Cyril Chemparathy <cyril@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2010-05-08 05:06:35 +08:00
.base = DA8XX_TIMER64P1_BASE,
davinci: Add base DA850/OMAP-L138 SoC support The DA850/OMAP-L138 is a new SoC from TI in the same family as DA830/OMAP-L137. Major changes include better support for power management, support for SATA devices and McBSP (same IP as DM644x). DA850/OMAP-L138 documents are available at http://focus.ti.com/docs/prod/folders/print/omap-l138.html. Signed-off-by: Sudhakar Rajashekhara <sudhakar.raj@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2009-07-16 18:41:54 +08:00
.bottom_irq = IRQ_DA8XX_TINT12_1,
.top_irq = IRQ_DA8XX_TINT34_1,
},
{
Davinci: timer - use ioremap() This patch eliminates IO_ADDRESS() usage for Davinci timer definitions. The timer code has correspondingly been modified to ioremap() MMRs instead. Signed-off-by: Cyril Chemparathy <cyril@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2010-05-08 05:06:35 +08:00
.base = DA850_TIMER64P2_BASE,
davinci: Add base DA850/OMAP-L138 SoC support The DA850/OMAP-L138 is a new SoC from TI in the same family as DA830/OMAP-L137. Major changes include better support for power management, support for SATA devices and McBSP (same IP as DM644x). DA850/OMAP-L138 documents are available at http://focus.ti.com/docs/prod/folders/print/omap-l138.html. Signed-off-by: Sudhakar Rajashekhara <sudhakar.raj@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2009-07-16 18:41:54 +08:00
.bottom_irq = IRQ_DA850_TINT12_2,
.top_irq = IRQ_DA850_TINT34_2,
},
{
Davinci: timer - use ioremap() This patch eliminates IO_ADDRESS() usage for Davinci timer definitions. The timer code has correspondingly been modified to ioremap() MMRs instead. Signed-off-by: Cyril Chemparathy <cyril@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2010-05-08 05:06:35 +08:00
.base = DA850_TIMER64P3_BASE,
davinci: Add base DA850/OMAP-L138 SoC support The DA850/OMAP-L138 is a new SoC from TI in the same family as DA830/OMAP-L137. Major changes include better support for power management, support for SATA devices and McBSP (same IP as DM644x). DA850/OMAP-L138 documents are available at http://focus.ti.com/docs/prod/folders/print/omap-l138.html. Signed-off-by: Sudhakar Rajashekhara <sudhakar.raj@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2009-07-16 18:41:54 +08:00
.bottom_irq = IRQ_DA850_TINT12_3,
.top_irq = IRQ_DA850_TINT34_3,
},
};
/*
* T0_BOT: Timer 0, bottom : Used for clock_event
* T0_TOP: Timer 0, top : Used for clocksource
* T1_BOT, T1_TOP: Timer 1, bottom & top: Used for watchdog timer
*/
static struct davinci_timer_info da850_timer_info = {
.timers = da850_timer_instance,
.clockevent_id = T0_BOT,
.clocksource_id = T0_TOP,
};
davinci: DA850/OMAP-L138: add frequency scaling support Adds basic frequency scaling support for DA850/OMAP-L138. Currently, frequency scaling only on PLL0 is supported. No scaling of PLL1 as yet. Peripherals like MMC/SD which have a clock input synchronous with ARM clock will not work well since the clock will change behind their backs. Support for notification to such devices to adjust themselves to the new frequency will be added in later patches. Current defconfigs keep CPUFreq disabled so it will not affect normal operation. The OPP defintions assume clock input of 24MHz to the SoC. This is inline with hardcoding of input frequency in the <soc>.c files. At some point this will need to move into board dependent code as new boards appear with a different reference clock. Tested on OMAP-L138 EVM with ondemand governer and a shell script to vary processor load. Signed-off-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2009-09-22 23:44:01 +08:00
#ifdef CONFIG_CPU_FREQ
/*
* Notes:
* According to the TRM, minimum PLLM results in maximum power savings.
* The OPP definitions below should keep the PLLM as low as possible.
*
davinci: am18x/da850/omap-l138: add support for higher speed grades AM18x/DA850/OMAP-L138 SoCs have variants that can operate at a maximum of 456 MHz at 1.3V operating point. Also the 1.2V operating point has a variant that can support a maximum of 375 MHz. This patch adds three new OPPs (456 MHz, 408 MHz and 372 MHz) to the list of DA850 OPPs. Not all silicon is qualified to run at higher speeds and unfortunately the maximum speed the chip can support can only be determined from the label on the package (not software readable). Because of this, we depend on the maximum speed grade information to be provided to us in some board specific way. The board informs the maximum speed grade information by setting the da850_max_speed variable. Signed-off-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2010-12-21 00:01:33 +08:00
* The output of the PLLM must be between 300 to 600 MHz.
davinci: DA850/OMAP-L138: add frequency scaling support Adds basic frequency scaling support for DA850/OMAP-L138. Currently, frequency scaling only on PLL0 is supported. No scaling of PLL1 as yet. Peripherals like MMC/SD which have a clock input synchronous with ARM clock will not work well since the clock will change behind their backs. Support for notification to such devices to adjust themselves to the new frequency will be added in later patches. Current defconfigs keep CPUFreq disabled so it will not affect normal operation. The OPP defintions assume clock input of 24MHz to the SoC. This is inline with hardcoding of input frequency in the <soc>.c files. At some point this will need to move into board dependent code as new boards appear with a different reference clock. Tested on OMAP-L138 EVM with ondemand governer and a shell script to vary processor load. Signed-off-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2009-09-22 23:44:01 +08:00
*/
struct da850_opp {
unsigned int freq; /* in KHz */
unsigned int prediv;
unsigned int mult;
unsigned int postdiv;
davinci: DA850/OMAP-L138: add voltage regulation support This patch adds support for regulating the CVDD voltage for the DA850/OMAP-L138 platform. The CVDD min and max values for each OPP have been obtained from section 5.2 "Recommended Operating Conditions" of SPRS586 Signed-off-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2009-09-22 23:44:02 +08:00
unsigned int cvdd_min; /* in uV */
unsigned int cvdd_max; /* in uV */
davinci: DA850/OMAP-L138: add frequency scaling support Adds basic frequency scaling support for DA850/OMAP-L138. Currently, frequency scaling only on PLL0 is supported. No scaling of PLL1 as yet. Peripherals like MMC/SD which have a clock input synchronous with ARM clock will not work well since the clock will change behind their backs. Support for notification to such devices to adjust themselves to the new frequency will be added in later patches. Current defconfigs keep CPUFreq disabled so it will not affect normal operation. The OPP defintions assume clock input of 24MHz to the SoC. This is inline with hardcoding of input frequency in the <soc>.c files. At some point this will need to move into board dependent code as new boards appear with a different reference clock. Tested on OMAP-L138 EVM with ondemand governer and a shell script to vary processor load. Signed-off-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2009-09-22 23:44:01 +08:00
};
davinci: am18x/da850/omap-l138: add support for higher speed grades AM18x/DA850/OMAP-L138 SoCs have variants that can operate at a maximum of 456 MHz at 1.3V operating point. Also the 1.2V operating point has a variant that can support a maximum of 375 MHz. This patch adds three new OPPs (456 MHz, 408 MHz and 372 MHz) to the list of DA850 OPPs. Not all silicon is qualified to run at higher speeds and unfortunately the maximum speed the chip can support can only be determined from the label on the package (not software readable). Because of this, we depend on the maximum speed grade information to be provided to us in some board specific way. The board informs the maximum speed grade information by setting the da850_max_speed variable. Signed-off-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2010-12-21 00:01:33 +08:00
static const struct da850_opp da850_opp_456 = {
.freq = 456000,
.prediv = 1,
.mult = 19,
.postdiv = 1,
.cvdd_min = 1300000,
.cvdd_max = 1350000,
};
static const struct da850_opp da850_opp_408 = {
.freq = 408000,
.prediv = 1,
.mult = 17,
.postdiv = 1,
.cvdd_min = 1300000,
.cvdd_max = 1350000,
};
static const struct da850_opp da850_opp_372 = {
.freq = 372000,
.prediv = 2,
.mult = 31,
.postdiv = 1,
.cvdd_min = 1200000,
.cvdd_max = 1320000,
};
davinci: DA850/OMAP-L138: add frequency scaling support Adds basic frequency scaling support for DA850/OMAP-L138. Currently, frequency scaling only on PLL0 is supported. No scaling of PLL1 as yet. Peripherals like MMC/SD which have a clock input synchronous with ARM clock will not work well since the clock will change behind their backs. Support for notification to such devices to adjust themselves to the new frequency will be added in later patches. Current defconfigs keep CPUFreq disabled so it will not affect normal operation. The OPP defintions assume clock input of 24MHz to the SoC. This is inline with hardcoding of input frequency in the <soc>.c files. At some point this will need to move into board dependent code as new boards appear with a different reference clock. Tested on OMAP-L138 EVM with ondemand governer and a shell script to vary processor load. Signed-off-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2009-09-22 23:44:01 +08:00
static const struct da850_opp da850_opp_300 = {
.freq = 300000,
.prediv = 1,
.mult = 25,
.postdiv = 2,
davinci: am18x/da850/omap-l138: use 'NOM' voltage defined in datasheet as min voltage For each DA850 OPP, the normal ('NOM') voltage defined in the tecnical reference manual (TRM) is actually the minimum voltage the frequency is supported at. The minimum ('MIN') voltage defined in TRM is meant to take care of voltage fluctuations and the device should not be run at this voltage for extended periods of time. Fix the OPP definitions to define the cvdd_min as the normal voltage defined in the datasheet. Signed-off-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2010-07-07 16:32:49 +08:00
.cvdd_min = 1200000,
davinci: DA850/OMAP-L138: add voltage regulation support This patch adds support for regulating the CVDD voltage for the DA850/OMAP-L138 platform. The CVDD min and max values for each OPP have been obtained from section 5.2 "Recommended Operating Conditions" of SPRS586 Signed-off-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2009-09-22 23:44:02 +08:00
.cvdd_max = 1320000,
davinci: DA850/OMAP-L138: add frequency scaling support Adds basic frequency scaling support for DA850/OMAP-L138. Currently, frequency scaling only on PLL0 is supported. No scaling of PLL1 as yet. Peripherals like MMC/SD which have a clock input synchronous with ARM clock will not work well since the clock will change behind their backs. Support for notification to such devices to adjust themselves to the new frequency will be added in later patches. Current defconfigs keep CPUFreq disabled so it will not affect normal operation. The OPP defintions assume clock input of 24MHz to the SoC. This is inline with hardcoding of input frequency in the <soc>.c files. At some point this will need to move into board dependent code as new boards appear with a different reference clock. Tested on OMAP-L138 EVM with ondemand governer and a shell script to vary processor load. Signed-off-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2009-09-22 23:44:01 +08:00
};
static const struct da850_opp da850_opp_200 = {
.freq = 200000,
.prediv = 1,
.mult = 25,
.postdiv = 3,
davinci: am18x/da850/omap-l138: use 'NOM' voltage defined in datasheet as min voltage For each DA850 OPP, the normal ('NOM') voltage defined in the tecnical reference manual (TRM) is actually the minimum voltage the frequency is supported at. The minimum ('MIN') voltage defined in TRM is meant to take care of voltage fluctuations and the device should not be run at this voltage for extended periods of time. Fix the OPP definitions to define the cvdd_min as the normal voltage defined in the datasheet. Signed-off-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2010-07-07 16:32:49 +08:00
.cvdd_min = 1100000,
davinci: DA850/OMAP-L138: add voltage regulation support This patch adds support for regulating the CVDD voltage for the DA850/OMAP-L138 platform. The CVDD min and max values for each OPP have been obtained from section 5.2 "Recommended Operating Conditions" of SPRS586 Signed-off-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2009-09-22 23:44:02 +08:00
.cvdd_max = 1160000,
davinci: DA850/OMAP-L138: add frequency scaling support Adds basic frequency scaling support for DA850/OMAP-L138. Currently, frequency scaling only on PLL0 is supported. No scaling of PLL1 as yet. Peripherals like MMC/SD which have a clock input synchronous with ARM clock will not work well since the clock will change behind their backs. Support for notification to such devices to adjust themselves to the new frequency will be added in later patches. Current defconfigs keep CPUFreq disabled so it will not affect normal operation. The OPP defintions assume clock input of 24MHz to the SoC. This is inline with hardcoding of input frequency in the <soc>.c files. At some point this will need to move into board dependent code as new boards appear with a different reference clock. Tested on OMAP-L138 EVM with ondemand governer and a shell script to vary processor load. Signed-off-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2009-09-22 23:44:01 +08:00
};
static const struct da850_opp da850_opp_96 = {
.freq = 96000,
.prediv = 1,
.mult = 20,
.postdiv = 5,
davinci: am18x/da850/omap-l138: use 'NOM' voltage defined in datasheet as min voltage For each DA850 OPP, the normal ('NOM') voltage defined in the tecnical reference manual (TRM) is actually the minimum voltage the frequency is supported at. The minimum ('MIN') voltage defined in TRM is meant to take care of voltage fluctuations and the device should not be run at this voltage for extended periods of time. Fix the OPP definitions to define the cvdd_min as the normal voltage defined in the datasheet. Signed-off-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2010-07-07 16:32:49 +08:00
.cvdd_min = 1000000,
davinci: DA850/OMAP-L138: add voltage regulation support This patch adds support for regulating the CVDD voltage for the DA850/OMAP-L138 platform. The CVDD min and max values for each OPP have been obtained from section 5.2 "Recommended Operating Conditions" of SPRS586 Signed-off-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2009-09-22 23:44:02 +08:00
.cvdd_max = 1050000,
davinci: DA850/OMAP-L138: add frequency scaling support Adds basic frequency scaling support for DA850/OMAP-L138. Currently, frequency scaling only on PLL0 is supported. No scaling of PLL1 as yet. Peripherals like MMC/SD which have a clock input synchronous with ARM clock will not work well since the clock will change behind their backs. Support for notification to such devices to adjust themselves to the new frequency will be added in later patches. Current defconfigs keep CPUFreq disabled so it will not affect normal operation. The OPP defintions assume clock input of 24MHz to the SoC. This is inline with hardcoding of input frequency in the <soc>.c files. At some point this will need to move into board dependent code as new boards appear with a different reference clock. Tested on OMAP-L138 EVM with ondemand governer and a shell script to vary processor load. Signed-off-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2009-09-22 23:44:01 +08:00
};
#define OPP(freq) \
{ \
cpufreq: rename index as driver_data in cpufreq_frequency_table The "index" field of struct cpufreq_frequency_table was never an index and isn't used at all by the cpufreq core. It only is useful for cpufreq drivers for their internal purposes. Many people nowadays blindly set it in ascending order with the assumption that the core will use it, which is a mistake. Rename it to "driver_data" as that's what its purpose is. All of its users are updated accordingly. [rjw: Changelog] Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-03-30 18:55:15 +08:00
.driver_data = (unsigned int) &da850_opp_##freq, \
davinci: DA850/OMAP-L138: add frequency scaling support Adds basic frequency scaling support for DA850/OMAP-L138. Currently, frequency scaling only on PLL0 is supported. No scaling of PLL1 as yet. Peripherals like MMC/SD which have a clock input synchronous with ARM clock will not work well since the clock will change behind their backs. Support for notification to such devices to adjust themselves to the new frequency will be added in later patches. Current defconfigs keep CPUFreq disabled so it will not affect normal operation. The OPP defintions assume clock input of 24MHz to the SoC. This is inline with hardcoding of input frequency in the <soc>.c files. At some point this will need to move into board dependent code as new boards appear with a different reference clock. Tested on OMAP-L138 EVM with ondemand governer and a shell script to vary processor load. Signed-off-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2009-09-22 23:44:01 +08:00
.frequency = freq * 1000, \
}
static struct cpufreq_frequency_table da850_freq_table[] = {
davinci: am18x/da850/omap-l138: add support for higher speed grades AM18x/DA850/OMAP-L138 SoCs have variants that can operate at a maximum of 456 MHz at 1.3V operating point. Also the 1.2V operating point has a variant that can support a maximum of 375 MHz. This patch adds three new OPPs (456 MHz, 408 MHz and 372 MHz) to the list of DA850 OPPs. Not all silicon is qualified to run at higher speeds and unfortunately the maximum speed the chip can support can only be determined from the label on the package (not software readable). Because of this, we depend on the maximum speed grade information to be provided to us in some board specific way. The board informs the maximum speed grade information by setting the da850_max_speed variable. Signed-off-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2010-12-21 00:01:33 +08:00
OPP(456),
OPP(408),
OPP(372),
davinci: DA850/OMAP-L138: add frequency scaling support Adds basic frequency scaling support for DA850/OMAP-L138. Currently, frequency scaling only on PLL0 is supported. No scaling of PLL1 as yet. Peripherals like MMC/SD which have a clock input synchronous with ARM clock will not work well since the clock will change behind their backs. Support for notification to such devices to adjust themselves to the new frequency will be added in later patches. Current defconfigs keep CPUFreq disabled so it will not affect normal operation. The OPP defintions assume clock input of 24MHz to the SoC. This is inline with hardcoding of input frequency in the <soc>.c files. At some point this will need to move into board dependent code as new boards appear with a different reference clock. Tested on OMAP-L138 EVM with ondemand governer and a shell script to vary processor load. Signed-off-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2009-09-22 23:44:01 +08:00
OPP(300),
OPP(200),
OPP(96),
{
cpufreq: rename index as driver_data in cpufreq_frequency_table The "index" field of struct cpufreq_frequency_table was never an index and isn't used at all by the cpufreq core. It only is useful for cpufreq drivers for their internal purposes. Many people nowadays blindly set it in ascending order with the assumption that the core will use it, which is a mistake. Rename it to "driver_data" as that's what its purpose is. All of its users are updated accordingly. [rjw: Changelog] Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-03-30 18:55:15 +08:00
.driver_data = 0,
davinci: DA850/OMAP-L138: add frequency scaling support Adds basic frequency scaling support for DA850/OMAP-L138. Currently, frequency scaling only on PLL0 is supported. No scaling of PLL1 as yet. Peripherals like MMC/SD which have a clock input synchronous with ARM clock will not work well since the clock will change behind their backs. Support for notification to such devices to adjust themselves to the new frequency will be added in later patches. Current defconfigs keep CPUFreq disabled so it will not affect normal operation. The OPP defintions assume clock input of 24MHz to the SoC. This is inline with hardcoding of input frequency in the <soc>.c files. At some point this will need to move into board dependent code as new boards appear with a different reference clock. Tested on OMAP-L138 EVM with ondemand governer and a shell script to vary processor load. Signed-off-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2009-09-22 23:44:01 +08:00
.frequency = CPUFREQ_TABLE_END,
},
};
davinci: am18x/da850/omap-l138: add support for higher speed grades AM18x/DA850/OMAP-L138 SoCs have variants that can operate at a maximum of 456 MHz at 1.3V operating point. Also the 1.2V operating point has a variant that can support a maximum of 375 MHz. This patch adds three new OPPs (456 MHz, 408 MHz and 372 MHz) to the list of DA850 OPPs. Not all silicon is qualified to run at higher speeds and unfortunately the maximum speed the chip can support can only be determined from the label on the package (not software readable). Because of this, we depend on the maximum speed grade information to be provided to us in some board specific way. The board informs the maximum speed grade information by setting the da850_max_speed variable. Signed-off-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2010-12-21 00:01:33 +08:00
#ifdef CONFIG_REGULATOR
static int da850_set_voltage(unsigned int index);
static int da850_regulator_init(void);
#endif
static struct davinci_cpufreq_config cpufreq_info = {
.freq_table = da850_freq_table,
#ifdef CONFIG_REGULATOR
.init = da850_regulator_init,
.set_voltage = da850_set_voltage,
#endif
};
davinci: DA850/OMAP-L138: avoid using separate initcall for initializing regulator Using a device_initcall() for initializing the voltage regulator on DA850 is not such a good idea because it gets called for all platforms - even those who do not have a regulator implemented. This leads to a big fat warning message during boot-up when regulator cannot be found. Instead, tie initialization of voltage regulator to cpufreq init. Define a platform specific init call which in case of DA850 gets used for initializing the regulator. On other future platforms it can be used for other purposes. Signed-off-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2009-10-22 17:42:16 +08:00
#ifdef CONFIG_REGULATOR
static struct regulator *cvdd;
static int da850_set_voltage(unsigned int index)
{
struct da850_opp *opp;
if (!cvdd)
return -ENODEV;
cpufreq: rename index as driver_data in cpufreq_frequency_table The "index" field of struct cpufreq_frequency_table was never an index and isn't used at all by the cpufreq core. It only is useful for cpufreq drivers for their internal purposes. Many people nowadays blindly set it in ascending order with the assumption that the core will use it, which is a mistake. Rename it to "driver_data" as that's what its purpose is. All of its users are updated accordingly. [rjw: Changelog] Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-03-30 18:55:15 +08:00
opp = (struct da850_opp *) cpufreq_info.freq_table[index].driver_data;
davinci: DA850/OMAP-L138: avoid using separate initcall for initializing regulator Using a device_initcall() for initializing the voltage regulator on DA850 is not such a good idea because it gets called for all platforms - even those who do not have a regulator implemented. This leads to a big fat warning message during boot-up when regulator cannot be found. Instead, tie initialization of voltage regulator to cpufreq init. Define a platform specific init call which in case of DA850 gets used for initializing the regulator. On other future platforms it can be used for other purposes. Signed-off-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2009-10-22 17:42:16 +08:00
return regulator_set_voltage(cvdd, opp->cvdd_min, opp->cvdd_max);
}
static int da850_regulator_init(void)
{
cvdd = regulator_get(NULL, "cvdd");
if (WARN(IS_ERR(cvdd), "Unable to obtain voltage regulator for CVDD;"
" voltage scaling unsupported\n")) {
return PTR_ERR(cvdd);
}
return 0;
}
#endif
davinci: DA850/OMAP-L138: add frequency scaling support Adds basic frequency scaling support for DA850/OMAP-L138. Currently, frequency scaling only on PLL0 is supported. No scaling of PLL1 as yet. Peripherals like MMC/SD which have a clock input synchronous with ARM clock will not work well since the clock will change behind their backs. Support for notification to such devices to adjust themselves to the new frequency will be added in later patches. Current defconfigs keep CPUFreq disabled so it will not affect normal operation. The OPP defintions assume clock input of 24MHz to the SoC. This is inline with hardcoding of input frequency in the <soc>.c files. At some point this will need to move into board dependent code as new boards appear with a different reference clock. Tested on OMAP-L138 EVM with ondemand governer and a shell script to vary processor load. Signed-off-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2009-09-22 23:44:01 +08:00
static struct platform_device da850_cpufreq_device = {
.name = "cpufreq-davinci",
.dev = {
.platform_data = &cpufreq_info,
},
davinci: am18x/da850/omap-l138: keep async clock constant with cpufreq Keep PLL0 SYSCLK3 at a constant rate of 100MHz. This enables the AEMIF timing to remain valid even as the PLL0 output is changed by cpufreq driver to save power. Signed-off-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2010-07-20 19:16:51 +08:00
.id = -1,
davinci: DA850/OMAP-L138: add frequency scaling support Adds basic frequency scaling support for DA850/OMAP-L138. Currently, frequency scaling only on PLL0 is supported. No scaling of PLL1 as yet. Peripherals like MMC/SD which have a clock input synchronous with ARM clock will not work well since the clock will change behind their backs. Support for notification to such devices to adjust themselves to the new frequency will be added in later patches. Current defconfigs keep CPUFreq disabled so it will not affect normal operation. The OPP defintions assume clock input of 24MHz to the SoC. This is inline with hardcoding of input frequency in the <soc>.c files. At some point this will need to move into board dependent code as new boards appear with a different reference clock. Tested on OMAP-L138 EVM with ondemand governer and a shell script to vary processor load. Signed-off-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2009-09-22 23:44:01 +08:00
};
davinci: am18x/da850/omap-l138: add support for higher speed grades AM18x/DA850/OMAP-L138 SoCs have variants that can operate at a maximum of 456 MHz at 1.3V operating point. Also the 1.2V operating point has a variant that can support a maximum of 375 MHz. This patch adds three new OPPs (456 MHz, 408 MHz and 372 MHz) to the list of DA850 OPPs. Not all silicon is qualified to run at higher speeds and unfortunately the maximum speed the chip can support can only be determined from the label on the package (not software readable). Because of this, we depend on the maximum speed grade information to be provided to us in some board specific way. The board informs the maximum speed grade information by setting the da850_max_speed variable. Signed-off-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2010-12-21 00:01:33 +08:00
unsigned int da850_max_speed = 300000;
ARM: davinci: don't mark da850_register_cpufreq as __init The mityomapl138_cpufreq_init and read_factory_config function in board-mityomapl138.c are not __init functions and might be called at a later stage, so da850_register_cpufreq must not be __init either. Without this patch, building da8xx_omapl_defconfig results in: WARNING: arch/arm/mach-davinci/built-in.o(.text+0x2eb4): Section mismatch in reference from the function read_factory_config() to the function .init.text:da850_register_cpufreq() The function read_factory_config() references the function __init da850_register_cpufreq(). This is often because read_factory_config lacks a __init annotation or the annotation of da850_register_cpufreq is wrong. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Sekhar Nori <nsekhar@ti.com> Cc: Kevin Hilman <khilman@ti.com>
2012-04-30 22:00:15 +08:00
int da850_register_cpufreq(char *async_clk)
davinci: DA850/OMAP-L138: add frequency scaling support Adds basic frequency scaling support for DA850/OMAP-L138. Currently, frequency scaling only on PLL0 is supported. No scaling of PLL1 as yet. Peripherals like MMC/SD which have a clock input synchronous with ARM clock will not work well since the clock will change behind their backs. Support for notification to such devices to adjust themselves to the new frequency will be added in later patches. Current defconfigs keep CPUFreq disabled so it will not affect normal operation. The OPP defintions assume clock input of 24MHz to the SoC. This is inline with hardcoding of input frequency in the <soc>.c files. At some point this will need to move into board dependent code as new boards appear with a different reference clock. Tested on OMAP-L138 EVM with ondemand governer and a shell script to vary processor load. Signed-off-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2009-09-22 23:44:01 +08:00
{
davinci: am18x/da850/omap-l138: add support for higher speed grades AM18x/DA850/OMAP-L138 SoCs have variants that can operate at a maximum of 456 MHz at 1.3V operating point. Also the 1.2V operating point has a variant that can support a maximum of 375 MHz. This patch adds three new OPPs (456 MHz, 408 MHz and 372 MHz) to the list of DA850 OPPs. Not all silicon is qualified to run at higher speeds and unfortunately the maximum speed the chip can support can only be determined from the label on the package (not software readable). Because of this, we depend on the maximum speed grade information to be provided to us in some board specific way. The board informs the maximum speed grade information by setting the da850_max_speed variable. Signed-off-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2010-12-21 00:01:33 +08:00
int i;
davinci: am18x/da850/omap-l138: keep async clock constant with cpufreq Keep PLL0 SYSCLK3 at a constant rate of 100MHz. This enables the AEMIF timing to remain valid even as the PLL0 output is changed by cpufreq driver to save power. Signed-off-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2010-07-20 19:16:51 +08:00
/* cpufreq driver can help keep an "async" clock constant */
if (async_clk)
clk_add_alias("async", da850_cpufreq_device.name,
async_clk, NULL);
davinci: am18x/da850/omap-l138: add support for higher speed grades AM18x/DA850/OMAP-L138 SoCs have variants that can operate at a maximum of 456 MHz at 1.3V operating point. Also the 1.2V operating point has a variant that can support a maximum of 375 MHz. This patch adds three new OPPs (456 MHz, 408 MHz and 372 MHz) to the list of DA850 OPPs. Not all silicon is qualified to run at higher speeds and unfortunately the maximum speed the chip can support can only be determined from the label on the package (not software readable). Because of this, we depend on the maximum speed grade information to be provided to us in some board specific way. The board informs the maximum speed grade information by setting the da850_max_speed variable. Signed-off-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2010-12-21 00:01:33 +08:00
for (i = 0; i < ARRAY_SIZE(da850_freq_table); i++) {
if (da850_freq_table[i].frequency <= da850_max_speed) {
cpufreq_info.freq_table = &da850_freq_table[i];
break;
}
}
davinci: am18x/da850/omap-l138: keep async clock constant with cpufreq Keep PLL0 SYSCLK3 at a constant rate of 100MHz. This enables the AEMIF timing to remain valid even as the PLL0 output is changed by cpufreq driver to save power. Signed-off-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2010-07-20 19:16:51 +08:00
davinci: DA850/OMAP-L138: add frequency scaling support Adds basic frequency scaling support for DA850/OMAP-L138. Currently, frequency scaling only on PLL0 is supported. No scaling of PLL1 as yet. Peripherals like MMC/SD which have a clock input synchronous with ARM clock will not work well since the clock will change behind their backs. Support for notification to such devices to adjust themselves to the new frequency will be added in later patches. Current defconfigs keep CPUFreq disabled so it will not affect normal operation. The OPP defintions assume clock input of 24MHz to the SoC. This is inline with hardcoding of input frequency in the <soc>.c files. At some point this will need to move into board dependent code as new boards appear with a different reference clock. Tested on OMAP-L138 EVM with ondemand governer and a shell script to vary processor load. Signed-off-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2009-09-22 23:44:01 +08:00
return platform_device_register(&da850_cpufreq_device);
}
#else
davinci: cpufreq: bailout on regulator errors Current cpufreq code does not consider errors that can occur while changing voltage. Code to increase CPU frequency goes ahead even in the case the regulator has failed to increase the voltage. This leads to hard error since lower voltages cannot support increased frequency. Prevent this by not increasing frequency in case increasing voltage is not successful. Also, do not lower the voltage if changing the cpu frequency has failed for some reason. Note that we do not return error on failure to decrease voltage as that is not a hard error. Build fix for non-cpufreq kernels by Caglar Akyuz. Signed-off-by: Sekhar Nori <nsekhar@ti.com> Cc: Caglar Akyuz <caglar@bilkon-kontrol.com.tr> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2010-07-20 19:16:48 +08:00
int __init da850_register_cpufreq(char *async_clk)
davinci: DA850/OMAP-L138: add frequency scaling support Adds basic frequency scaling support for DA850/OMAP-L138. Currently, frequency scaling only on PLL0 is supported. No scaling of PLL1 as yet. Peripherals like MMC/SD which have a clock input synchronous with ARM clock will not work well since the clock will change behind their backs. Support for notification to such devices to adjust themselves to the new frequency will be added in later patches. Current defconfigs keep CPUFreq disabled so it will not affect normal operation. The OPP defintions assume clock input of 24MHz to the SoC. This is inline with hardcoding of input frequency in the <soc>.c files. At some point this will need to move into board dependent code as new boards appear with a different reference clock. Tested on OMAP-L138 EVM with ondemand governer and a shell script to vary processor load. Signed-off-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2009-09-22 23:44:01 +08:00
{
return 0;
}
#endif
[media] ARM: davinci: da850: Add SoC related definitions for VPIF Add clock, pin mux definitions and registration function for VPIF capture and display driver on DA850/OMAP-L138 SoC. Signed-off-by: Manjunath Hadli <manjunath.hadli@ti.com> Signed-off-by: Lad, Prabhakar <prabhakar.lad@ti.com> Acked-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-01-23 17:17:24 +08:00
/* VPIF resource, platform data */
static u64 da850_vpif_dma_mask = DMA_BIT_MASK(32);
static struct resource da850_vpif_resource[] = {
{
.start = DA8XX_VPIF_BASE,
.end = DA8XX_VPIF_BASE + 0xfff,
.flags = IORESOURCE_MEM,
}
};
static struct platform_device da850_vpif_dev = {
.name = "vpif",
.id = -1,
.dev = {
.dma_mask = &da850_vpif_dma_mask,
.coherent_dma_mask = DMA_BIT_MASK(32),
},
.resource = da850_vpif_resource,
.num_resources = ARRAY_SIZE(da850_vpif_resource),
};
static struct resource da850_vpif_display_resource[] = {
{
.start = IRQ_DA850_VPIFINT,
.end = IRQ_DA850_VPIFINT,
.flags = IORESOURCE_IRQ,
},
};
static struct platform_device da850_vpif_display_dev = {
.name = "vpif_display",
.id = -1,
.dev = {
.dma_mask = &da850_vpif_dma_mask,
.coherent_dma_mask = DMA_BIT_MASK(32),
},
.resource = da850_vpif_display_resource,
.num_resources = ARRAY_SIZE(da850_vpif_display_resource),
};
static struct resource da850_vpif_capture_resource[] = {
{
.start = IRQ_DA850_VPIFINT,
.end = IRQ_DA850_VPIFINT,
.flags = IORESOURCE_IRQ,
},
{
.start = IRQ_DA850_VPIFINT,
.end = IRQ_DA850_VPIFINT,
.flags = IORESOURCE_IRQ,
},
};
static struct platform_device da850_vpif_capture_dev = {
.name = "vpif_capture",
.id = -1,
.dev = {
.dma_mask = &da850_vpif_dma_mask,
.coherent_dma_mask = DMA_BIT_MASK(32),
},
.resource = da850_vpif_capture_resource,
.num_resources = ARRAY_SIZE(da850_vpif_capture_resource),
};
int __init da850_register_vpif(void)
{
return platform_device_register(&da850_vpif_dev);
}
int __init da850_register_vpif_display(struct vpif_display_config
*display_config)
{
da850_vpif_display_dev.dev.platform_data = display_config;
return platform_device_register(&da850_vpif_display_dev);
}
int __init da850_register_vpif_capture(struct vpif_capture_config
*capture_config)
{
da850_vpif_capture_dev.dev.platform_data = capture_config;
return platform_device_register(&da850_vpif_capture_dev);
}
ARM: davinci: da8xx: support gpio platform device DaVinci GPIO driver now uses platform device model. Convert DA8XX SoC code to use the new model. Add da8xx_register_gpio() to create platform device for da8xx platforms. Signed-off-by: KV Sujith <sujithkv@ti.com> Signed-off-by: Philip Avinash <avinashphilip@ti.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> [nsekhar@ti.com: simplify commit message] Signed-off-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Lad, Prabhakar <prabhakar.csengg@gmail.com>
2013-08-18 13:18:59 +08:00
static struct davinci_gpio_platform_data da850_gpio_platform_data = {
ARM: davinci: da850: set the GPIO base to 0 Commit 587f7a694f01 ("gpio: davinci: Use dev name for label and automatic base selection") broke the network support in legacy boot mode for da850-evm since we can no longer request the MDIO clock GPIO. We now have the option to specify the GPIO base manually for davinci, so add the relevant fields to platform data. Fixes: 587f7a694f01 ("gpio: davinci: Use dev name for label and automatic base selection") Cc: stable@vger.kernel.org Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2018-11-21 17:35:18 +08:00
.no_auto_base = true,
.base = 0,
.ngpio = 144,
ARM: davinci: da8xx: support gpio platform device DaVinci GPIO driver now uses platform device model. Convert DA8XX SoC code to use the new model. Add da8xx_register_gpio() to create platform device for da8xx platforms. Signed-off-by: KV Sujith <sujithkv@ti.com> Signed-off-by: Philip Avinash <avinashphilip@ti.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> [nsekhar@ti.com: simplify commit message] Signed-off-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Lad, Prabhakar <prabhakar.csengg@gmail.com>
2013-08-18 13:18:59 +08:00
};
int __init da850_register_gpio(void)
{
return da8xx_register_gpio(&da850_gpio_platform_data);
}
ARM: davinci: make davinci_soc_info structures const Make davinci_soc_info structures const as they are either passed to the function davinci_common_init having the argument as const or their field cpu_clks of type struct clk_lookup * is passed to the function davinci_clk_init. So, the fields are never modified and the structures can be const. Done using Coccinelle. Signed-off-by: Bhumika Goyal <bhumirks@gmail.com> [nsekhar@ti.com: minor commit message adjustment] Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2017-10-16 18:08:24 +08:00
static const struct davinci_soc_info davinci_soc_info_da850 = {
davinci: Add base DA850/OMAP-L138 SoC support The DA850/OMAP-L138 is a new SoC from TI in the same family as DA830/OMAP-L137. Major changes include better support for power management, support for SATA devices and McBSP (same IP as DM644x). DA850/OMAP-L138 documents are available at http://focus.ti.com/docs/prod/folders/print/omap-l138.html. Signed-off-by: Sudhakar Rajashekhara <sudhakar.raj@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2009-07-16 18:41:54 +08:00
.io_desc = da850_io_desc,
.io_desc_num = ARRAY_SIZE(da850_io_desc),
Davinci: jtag_id - use ioremap() This patch replaces the jtag id base info in davinci_soc_info with a physical address which is then ioremap()ed within common code. This patch (in combination with a similar change for PSC) will allow us to eliminate the SYSCFG nastiness in DA8xx code. Signed-off-by: Cyril Chemparathy <cyril@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2010-05-08 05:06:34 +08:00
.jtag_id_reg = DA8XX_SYSCFG0_BASE + DA8XX_JTAG_ID_REG,
davinci: Add base DA850/OMAP-L138 SoC support The DA850/OMAP-L138 is a new SoC from TI in the same family as DA830/OMAP-L137. Major changes include better support for power management, support for SATA devices and McBSP (same IP as DM644x). DA850/OMAP-L138 documents are available at http://focus.ti.com/docs/prod/folders/print/omap-l138.html. Signed-off-by: Sudhakar Rajashekhara <sudhakar.raj@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2009-07-16 18:41:54 +08:00
.ids = da850_ids,
.ids_num = ARRAY_SIZE(da850_ids),
Davinci: pinmux - use ioremap() This patch modifies the pinmux implementation so as to ioremap() the pinmux register area on first use. Signed-off-by: Cyril Chemparathy <cyril@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2010-05-08 05:06:38 +08:00
.pinmux_base = DA8XX_SYSCFG0_BASE + 0x120,
davinci: Add base DA850/OMAP-L138 SoC support The DA850/OMAP-L138 is a new SoC from TI in the same family as DA830/OMAP-L137. Major changes include better support for power management, support for SATA devices and McBSP (same IP as DM644x). DA850/OMAP-L138 documents are available at http://focus.ti.com/docs/prod/folders/print/omap-l138.html. Signed-off-by: Sudhakar Rajashekhara <sudhakar.raj@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2009-07-16 18:41:54 +08:00
.pinmux_pins = da850_pins,
.pinmux_pins_num = ARRAY_SIZE(da850_pins),
Davinci: aintc/cpintc - use ioremap() This patch implements the following: - interrupt initialization uses ioremap() instead of passing a virtual address via davinci_soc_info. - machine definitions directly point to cp_intc_init() or davinci_irq_init() - davinci_intc_type and davinci_intc_base now get initialized in controller specific init functions instead of davinci_common_init() - minor fix in davinci_irq_init() to use intc_irq_num instead of DAVINCI_N_AINTC_IRQ Signed-off-by: Cyril Chemparathy <cyril@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2010-05-08 05:06:37 +08:00
.intc_base = DA8XX_CP_INTC_BASE,
davinci: Add base DA850/OMAP-L138 SoC support The DA850/OMAP-L138 is a new SoC from TI in the same family as DA830/OMAP-L137. Major changes include better support for power management, support for SATA devices and McBSP (same IP as DM644x). DA850/OMAP-L138 documents are available at http://focus.ti.com/docs/prod/folders/print/omap-l138.html. Signed-off-by: Sudhakar Rajashekhara <sudhakar.raj@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2009-07-16 18:41:54 +08:00
.intc_type = DAVINCI_INTC_TYPE_CP_INTC,
.intc_irq_prios = da850_default_priorities,
.intc_irq_num = DA850_N_CP_INTC_IRQ,
.timer_info = &da850_timer_info,
.emac_pdata = &da8xx_emac_pdata,
ARM: davinci: da850: changed SRAM allocator to shared ram. This patch modifies the sram allocator to allocate memory from the DA8XX shared RAM. Regression tested suspend/resume on AM180x EVM. Signed-off-by: Subhasish Ghosh <subhasish@mistralsolutions.com> [rebased onto consolidated SRAM patches] Signed-off-by: Ben Gardiner <bengardiner@nanometrics.ca> [rebased to mainline as consolidated SRAM patches were dropped] Signed-off-by: Matt Porter <mporter@ti.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2012-10-06 01:04:42 +08:00
.sram_dma = DA8XX_SHARED_RAM_BASE,
.sram_len = SZ_128K,
davinci: Add base DA850/OMAP-L138 SoC support The DA850/OMAP-L138 is a new SoC from TI in the same family as DA830/OMAP-L137. Major changes include better support for power management, support for SATA devices and McBSP (same IP as DM644x). DA850/OMAP-L138 documents are available at http://focus.ti.com/docs/prod/folders/print/omap-l138.html. Signed-off-by: Sudhakar Rajashekhara <sudhakar.raj@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2009-07-16 18:41:54 +08:00
};
void __init da850_init(void)
{
Davinci: iotable based ioremap() interception This patch allows for a more flexible ioremap() interception based on iotable contents. With this patch, the ioremap() interception code can properly translate addresses only after davinci_soc_info has been initialized. Consequently, in soc-specific init functions, davinci_common_init() has to happen before any ioremap() attempts. The da8xx init sequence has been suitably modified to meet this restriction. Signed-off-by: Cyril Chemparathy <cyril@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2010-05-08 05:06:39 +08:00
davinci_common_init(&davinci_soc_info_da850);
davinci: da8xx/omapl1: add support for the second sysconfig module OMAP-L138 adds a second SYSCFG region having useful functionality like deep sleep, pull up/down control and SATA clock stop. This patch makes provision for accessing registers from second SYSCFG region in da8xx code. Note that OMAP-L137 has a single SYSCFG region. Signed-off-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2009-11-16 19:51:32 +08:00
da8xx_syscfg0_base = ioremap(DA8XX_SYSCFG0_BASE, SZ_4K);
if (WARN(!da8xx_syscfg0_base, "Unable to map syscfg0 module"))
return;
da8xx_syscfg1_base = ioremap(DA8XX_SYSCFG1_BASE, SZ_4K);
ARM: davinci: da850: Remove legacy clock init This removes the unused legacy clock init code from arch/arm/mach-davinci/da850.c. Signed-off-by: David Lechner <david@lechnology.com> Reviewed-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2018-05-19 00:48:19 +08:00
WARN(!da8xx_syscfg1_base, "Unable to map syscfg1 module");
ARM: davinci: move davinci_clk_init() to init_time This moves the call of davinci_clk_init() from map_io to init_time for all boards. This is the proper place to init clocks. This is also done in preparation for moving to the common clock framework. dm646x is a special case because we need to handle different ref_clk rates depending on which board is being used. The clock init in this case is modified to set the rate before registering the clocks instead of using davinci_set_refclk_rate() to recalculate the entire clock tree after all of the clocks are registered. Also, the cpu_clks field is removed from struct davinci_soc_info since it is no longer needed. Signed-off-by: David Lechner <david@lechnology.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2018-01-20 11:20:22 +08:00
}
ARM: davinci: Move clock init after ioremap. Some clocks (such as the USB PHY clocks in DA8xx) will need to use iomem. The davinci_common_init() function must be called before the ioremap, so the clock init is now split out as separate function. Signed-off-by: David Lechner <david@lechnology.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2016-04-15 03:13:35 +08:00
ARM: davinci: move davinci_clk_init() to init_time This moves the call of davinci_clk_init() from map_io to init_time for all boards. This is the proper place to init clocks. This is also done in preparation for moving to the common clock framework. dm646x is a special case because we need to handle different ref_clk rates depending on which board is being used. The clock init in this case is modified to set the rate before registering the clocks instead of using davinci_set_refclk_rate() to recalculate the entire clock tree after all of the clocks are registered. Also, the cpu_clks field is removed from struct davinci_soc_info since it is no longer needed. Signed-off-by: David Lechner <david@lechnology.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2018-01-20 11:20:22 +08:00
void __init da850_init_time(void)
{
ARM: davinci: da850: add new clock init using common clock framework This adds the new board-specific clock init in mach-davinci/da850.c using the new common clock framework drivers. The #ifdefs are needed to prevent compile errors until the entire ARCH_DAVINCI is converted. Also clean up the #includes since we are adding some here. Some CFGCHIP macros were removed because we are now including linux/mfd/da8xx-cfgchip.h which defines the same values. Reviewed-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: David Lechner <david@lechnology.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2018-05-19 00:48:08 +08:00
void __iomem *pll0;
struct regmap *cfgchip;
struct clk *clk;
clk_register_fixed_rate(NULL, "ref_clk", NULL, 0, DA850_REF_FREQ);
pll0 = ioremap(DA8XX_PLL0_BASE, SZ_4K);
cfgchip = da8xx_get_cfgchip();
da850_pll0_init(NULL, pll0, cfgchip);
clk = clk_get(NULL, "timer0");
davinci_timer_init(clk);
}
static struct resource da850_pll1_resources[] = {
{
.start = DA850_PLL1_BASE,
.end = DA850_PLL1_BASE + SZ_4K - 1,
.flags = IORESOURCE_MEM,
},
};
static struct davinci_pll_platform_data da850_pll1_pdata;
static struct platform_device da850_pll1_device = {
.name = "da850-pll1",
.id = -1,
.resource = da850_pll1_resources,
.num_resources = ARRAY_SIZE(da850_pll1_resources),
.dev = {
.platform_data = &da850_pll1_pdata,
},
};
static struct resource da850_psc0_resources[] = {
{
.start = DA8XX_PSC0_BASE,
.end = DA8XX_PSC0_BASE + SZ_4K - 1,
.flags = IORESOURCE_MEM,
},
};
static struct platform_device da850_psc0_device = {
.name = "da850-psc0",
.id = -1,
.resource = da850_psc0_resources,
.num_resources = ARRAY_SIZE(da850_psc0_resources),
};
static struct resource da850_psc1_resources[] = {
{
.start = DA8XX_PSC1_BASE,
.end = DA8XX_PSC1_BASE + SZ_4K - 1,
.flags = IORESOURCE_MEM,
},
};
static struct platform_device da850_psc1_device = {
.name = "da850-psc1",
.id = -1,
.resource = da850_psc1_resources,
.num_resources = ARRAY_SIZE(da850_psc1_resources),
};
static struct da8xx_cfgchip_clk_platform_data da850_async1_pdata;
static struct platform_device da850_async1_clksrc_device = {
.name = "da850-async1-clksrc",
.id = -1,
.dev = {
.platform_data = &da850_async1_pdata,
},
};
static struct da8xx_cfgchip_clk_platform_data da850_async3_pdata;
static struct platform_device da850_async3_clksrc_device = {
.name = "da850-async3-clksrc",
.id = -1,
.dev = {
.platform_data = &da850_async3_pdata,
},
};
static struct da8xx_cfgchip_clk_platform_data da850_tbclksync_pdata;
static struct platform_device da850_tbclksync_device = {
.name = "da830-tbclksync",
.id = -1,
.dev = {
.platform_data = &da850_tbclksync_pdata,
},
};
void __init da850_register_clocks(void)
{
/* PLL0 is registered in da850_init_time() */
da850_pll1_pdata.cfgchip = da8xx_get_cfgchip();
platform_device_register(&da850_pll1_device);
da850_async1_pdata.cfgchip = da8xx_get_cfgchip();
platform_device_register(&da850_async1_clksrc_device);
da850_async3_pdata.cfgchip = da8xx_get_cfgchip();
platform_device_register(&da850_async3_clksrc_device);
platform_device_register(&da850_psc0_device);
platform_device_register(&da850_psc1_device);
da850_tbclksync_pdata.cfgchip = da8xx_get_cfgchip();
platform_device_register(&da850_tbclksync_device);
davinci: Add base DA850/OMAP-L138 SoC support The DA850/OMAP-L138 is a new SoC from TI in the same family as DA830/OMAP-L137. Major changes include better support for power management, support for SATA devices and McBSP (same IP as DM644x). DA850/OMAP-L138 documents are available at http://focus.ti.com/docs/prod/folders/print/omap-l138.html. Signed-off-by: Sudhakar Rajashekhara <sudhakar.raj@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2009-07-16 18:41:54 +08:00
}