2019-04-16 10:56:01 +08:00
|
|
|
=========================
|
|
|
|
Mass Storage Gadget (MSG)
|
|
|
|
=========================
|
|
|
|
|
|
|
|
Overview
|
|
|
|
========
|
2012-06-12 18:42:18 +08:00
|
|
|
|
|
|
|
Mass Storage Gadget (or MSG) acts as a USB Mass Storage device,
|
|
|
|
appearing to the host as a disk or a CD-ROM drive. It supports
|
|
|
|
multiple logical units (LUNs). Backing storage for each LUN is
|
|
|
|
provided by a regular file or a block device, access can be limited
|
|
|
|
to read-only, and gadget can indicate that it is removable and/or
|
|
|
|
CD-ROM (the latter implies read-only access).
|
|
|
|
|
|
|
|
Its requirements are modest; only a bulk-in and a bulk-out endpoint
|
|
|
|
are needed. The memory requirement amounts to two 16K buffers.
|
|
|
|
Support is included for full-speed, high-speed and SuperSpeed
|
|
|
|
operation.
|
|
|
|
|
|
|
|
Note that the driver is slightly non-portable in that it assumes
|
2014-04-05 10:31:00 +08:00
|
|
|
a single memory/DMA buffer will be usable for bulk-in and bulk-out
|
2012-06-12 18:42:18 +08:00
|
|
|
endpoints. With most device controllers this is not an issue, but
|
|
|
|
there may be some with hardware restrictions that prevent a buffer
|
|
|
|
from being used by more than one endpoint.
|
|
|
|
|
|
|
|
This document describes how to use the gadget from user space, its
|
|
|
|
relation to mass storage function (or MSF) and different gadgets
|
2012-11-07 05:52:36 +08:00
|
|
|
using it, and how it differs from File Storage Gadget (or FSG)
|
|
|
|
(which is no longer included in Linux). It will talk only briefly
|
|
|
|
about how to use MSF within composite gadgets.
|
2012-06-12 18:42:18 +08:00
|
|
|
|
2019-04-16 10:56:01 +08:00
|
|
|
Module parameters
|
|
|
|
=================
|
2012-06-12 18:42:18 +08:00
|
|
|
|
|
|
|
The mass storage gadget accepts the following mass storage specific
|
|
|
|
module parameters:
|
|
|
|
|
|
|
|
- file=filename[,filename...]
|
|
|
|
|
|
|
|
This parameter lists paths to files or block devices used for
|
|
|
|
backing storage for each logical unit. There may be at most
|
|
|
|
FSG_MAX_LUNS (8) LUNs set. If more files are specified, they will
|
|
|
|
be silently ignored. See also “luns” parameter.
|
|
|
|
|
|
|
|
*BEWARE* that if a file is used as a backing storage, it may not
|
|
|
|
be modified by any other process. This is because the host
|
|
|
|
assumes the data does not change without its knowledge. It may be
|
|
|
|
read, but (if the logical unit is writable) due to buffering on
|
|
|
|
the host side, the contents are not well defined.
|
|
|
|
|
|
|
|
The size of the logical unit will be rounded down to a full
|
|
|
|
logical block. The logical block size is 2048 bytes for LUNs
|
|
|
|
simulating CD-ROM, block size of the device if the backing file is
|
|
|
|
a block device, or 512 bytes otherwise.
|
|
|
|
|
|
|
|
- removable=b[,b...]
|
|
|
|
|
|
|
|
This parameter specifies whether each logical unit should be
|
|
|
|
removable. “b” here is either “y”, “Y” or “1” for true or “n”,
|
|
|
|
“N” or “0” for false.
|
|
|
|
|
|
|
|
If this option is set for a logical unit, gadget will accept an
|
|
|
|
“eject” SCSI request (Start/Stop Unit). When it is sent, the
|
|
|
|
backing file will be closed to simulate ejection and the logical
|
|
|
|
unit will not be mountable by the host until a new backing file is
|
|
|
|
specified by userspace on the device (see “sysfs entries”
|
|
|
|
section).
|
|
|
|
|
|
|
|
If a logical unit is not removable (the default), a backing file
|
|
|
|
must be specified for it with the “file” parameter as the module
|
|
|
|
is loaded. The same applies if the module is built in, no
|
|
|
|
exceptions.
|
|
|
|
|
|
|
|
The default value of the flag is false, *HOWEVER* it used to be
|
|
|
|
true. This has been changed to better match File Storage Gadget
|
|
|
|
and because it seems like a saner default after all. Thus to
|
|
|
|
maintain compatibility with older kernels, it's best to specify
|
|
|
|
the default values. Also, if one relied on old default, explicit
|
|
|
|
“n” needs to be specified now.
|
|
|
|
|
|
|
|
Note that “removable” means the logical unit's media can be
|
|
|
|
ejected or removed (as is true for a CD-ROM drive or a card
|
|
|
|
reader). It does *not* mean that the entire gadget can be
|
|
|
|
unplugged from the host; the proper term for that is
|
|
|
|
“hot-unpluggable”.
|
|
|
|
|
|
|
|
- cdrom=b[,b...]
|
|
|
|
|
|
|
|
This parameter specifies whether each logical unit should simulate
|
|
|
|
CD-ROM. The default is false.
|
|
|
|
|
|
|
|
- ro=b[,b...]
|
|
|
|
|
|
|
|
This parameter specifies whether each logical unit should be
|
|
|
|
reported as read only. This will prevent host from modifying the
|
|
|
|
backing files.
|
|
|
|
|
|
|
|
Note that if this flag for given logical unit is false but the
|
|
|
|
backing file could not be opened in read/write mode, the gadget
|
|
|
|
will fall back to read only mode anyway.
|
|
|
|
|
|
|
|
The default value for non-CD-ROM logical units is false; for
|
|
|
|
logical units simulating CD-ROM it is forced to true.
|
|
|
|
|
|
|
|
- nofua=b[,b...]
|
|
|
|
|
|
|
|
This parameter specifies whether FUA flag should be ignored in SCSI
|
|
|
|
Write10 and Write12 commands sent to given logical units.
|
|
|
|
|
|
|
|
MS Windows mounts removable storage in “Removal optimised mode” by
|
|
|
|
default. All the writes to the media are synchronous, which is
|
|
|
|
achieved by setting the FUA (Force Unit Access) bit in SCSI
|
|
|
|
Write(10,12) commands. This forces each write to wait until the
|
|
|
|
data has actually been written out and prevents I/O requests
|
|
|
|
aggregation in block layer dramatically decreasing performance.
|
|
|
|
|
|
|
|
Note that this may mean that if the device is powered from USB and
|
|
|
|
the user unplugs the device without unmounting it first (which at
|
|
|
|
least some Windows users do), the data may be lost.
|
|
|
|
|
|
|
|
The default value is false.
|
|
|
|
|
|
|
|
- luns=N
|
|
|
|
|
|
|
|
This parameter specifies number of logical units the gadget will
|
|
|
|
have. It is limited by FSG_MAX_LUNS (8) and higher value will be
|
|
|
|
capped.
|
|
|
|
|
|
|
|
If this parameter is provided, and the number of files specified
|
|
|
|
in “file” argument is greater then the value of “luns”, all excess
|
|
|
|
files will be ignored.
|
|
|
|
|
|
|
|
If this parameter is not present, the number of logical units will
|
|
|
|
be deduced from the number of files specified in the “file”
|
|
|
|
parameter. If the file parameter is missing as well, one is
|
|
|
|
assumed.
|
|
|
|
|
|
|
|
- stall=b
|
|
|
|
|
|
|
|
Specifies whether the gadget is allowed to halt bulk endpoints.
|
|
|
|
The default is determined according to the type of USB device
|
|
|
|
controller, but usually true.
|
|
|
|
|
|
|
|
In addition to the above, the gadget also accepts the following
|
|
|
|
parameters defined by the composite framework (they are common to
|
|
|
|
all composite gadgets so just a quick listing):
|
|
|
|
|
|
|
|
- idVendor -- USB Vendor ID (16 bit integer)
|
|
|
|
- idProduct -- USB Product ID (16 bit integer)
|
|
|
|
- bcdDevice -- USB Device version (BCD) (16 bit integer)
|
|
|
|
- iManufacturer -- USB Manufacturer string (string)
|
|
|
|
- iProduct -- USB Product string (string)
|
|
|
|
- iSerialNumber -- SerialNumber string (sting)
|
|
|
|
|
2019-04-16 10:56:01 +08:00
|
|
|
sysfs entries
|
|
|
|
=============
|
2012-06-12 18:42:18 +08:00
|
|
|
|
|
|
|
For each logical unit, the gadget creates a directory in the sysfs
|
|
|
|
hierarchy. Inside of it the following three files are created:
|
|
|
|
|
|
|
|
- file
|
|
|
|
|
|
|
|
When read it returns the path to the backing file for the given
|
|
|
|
logical unit. If there is no backing file (possible only if the
|
|
|
|
logical unit is removable), the content is empty.
|
|
|
|
|
|
|
|
When written into, it changes the backing file for given logical
|
|
|
|
unit. This change can be performed even if given logical unit is
|
|
|
|
not specified as removable (but that may look strange to the
|
|
|
|
host). It may fail, however, if host disallowed medium removal
|
|
|
|
with the Prevent-Allow Medium Removal SCSI command.
|
|
|
|
|
|
|
|
- ro
|
|
|
|
|
|
|
|
Reflects the state of ro flag for the given logical unit. It can
|
|
|
|
be read any time, and written to when there is no backing file
|
|
|
|
open for given logical unit.
|
|
|
|
|
|
|
|
- nofua
|
|
|
|
|
|
|
|
Reflects the state of nofua flag for given logical unit. It can
|
|
|
|
be read and written.
|
|
|
|
|
2022-07-11 18:29:57 +08:00
|
|
|
- forced_eject
|
|
|
|
|
|
|
|
When written into, it causes the backing file to be forcibly
|
|
|
|
detached from the LUN, regardless of whether the host has allowed
|
|
|
|
it. The content doesn't matter, any non-zero number of bytes
|
|
|
|
written will result in ejection.
|
|
|
|
|
|
|
|
Can not be read.
|
|
|
|
|
2012-06-12 18:42:18 +08:00
|
|
|
Other then those, as usual, the values of module parameters can be
|
|
|
|
read from /sys/module/g_mass_storage/parameters/* files.
|
|
|
|
|
2019-04-16 10:56:01 +08:00
|
|
|
Other gadgets using mass storage function
|
|
|
|
=========================================
|
2012-06-12 18:42:18 +08:00
|
|
|
|
|
|
|
The Mass Storage Gadget uses the Mass Storage Function to handle
|
|
|
|
mass storage protocol. As a composite function, MSF may be used by
|
|
|
|
other gadgets as well (eg. g_multi and acm_ms).
|
|
|
|
|
|
|
|
All of the information in previous sections are valid for other
|
|
|
|
gadgets using MSF, except that support for mass storage related
|
|
|
|
module parameters may be missing, or the parameters may have
|
|
|
|
a prefix. To figure out whether any of this is true one needs to
|
|
|
|
consult the gadget's documentation or its source code.
|
|
|
|
|
|
|
|
For examples of how to include mass storage function in gadgets, one
|
|
|
|
may take a look at mass_storage.c, acm_ms.c and multi.c (sorted by
|
|
|
|
complexity).
|
|
|
|
|
2019-04-16 10:56:01 +08:00
|
|
|
Relation to file storage gadget
|
|
|
|
===============================
|
2012-06-12 18:42:18 +08:00
|
|
|
|
|
|
|
The Mass Storage Function and thus the Mass Storage Gadget has been
|
|
|
|
based on the File Storage Gadget. The difference between the two is
|
|
|
|
that MSG is a composite gadget (ie. uses the composite framework)
|
2012-11-07 05:52:36 +08:00
|
|
|
while file storage gadget was a traditional gadget. From userspace
|
2012-06-12 18:42:18 +08:00
|
|
|
point of view this distinction does not really matter, but from
|
|
|
|
kernel hacker's point of view, this means that (i) MSG does not
|
|
|
|
duplicate code needed for handling basic USB protocol commands and
|
|
|
|
(ii) MSF can be used in any other composite gadget.
|
|
|
|
|
2012-11-07 05:52:36 +08:00
|
|
|
Because of that, File Storage Gadget has been removed in Linux 3.8.
|
|
|
|
All users need to transition to the Mass Storage Gadget. The two
|
|
|
|
gadgets behave mostly the same from the outside except:
|
2012-06-12 18:42:18 +08:00
|
|
|
|
|
|
|
1. In FSG the “removable” and “cdrom” module parameters set the flag
|
|
|
|
for all logical units whereas in MSG they accept a list of y/n
|
|
|
|
values for each logical unit. If one uses only a single logical
|
|
|
|
unit this does not matter, but if there are more, the y/n value
|
|
|
|
needs to be repeated for each logical unit.
|
|
|
|
|
|
|
|
2. FSG's “serial”, “vendor”, “product” and “release” module
|
|
|
|
parameters are handled in MSG by the composite layer's parameters
|
|
|
|
named respectively: “iSerialnumber”, “idVendor”, “idProduct” and
|
|
|
|
“bcdDevice”.
|
|
|
|
|
|
|
|
3. MSG does not support FSG's test mode, thus “transport”,
|
|
|
|
“protocol” and “buflen” FSG's module parameters are not
|
|
|
|
supported. MSG always uses SCSI protocol with bulk only
|
|
|
|
transport mode and 16 KiB buffers.
|