OpenCloudOS-Kernel/drivers/usb/early/xhci-dbc.c

1004 lines
24 KiB
C
Raw Normal View History

// SPDX-License-Identifier: GPL-2.0
usb/early: Add driver for xhci debug capability XHCI debug capability (DbC) is an optional but standalone functionality provided by an xHCI host controller. Software learns this capability by walking through the extended capability list of the host. XHCI specification describes DbC in section 7.6. This patch introduces the code to probe and initialize the debug capability hardware during early boot. With hardware initialized, the debug target (system on which this code is running) will present a debug device through the debug port (normally the first USB3 port). The debug device is fully compliant with the USB framework and provides the equivalent of a very high performance (USB3) full-duplex serial link between the debug host and target. The DbC functionality is independent of the xHCI host. There isn't any precondition from the xHCI host side for the DbC to work. One use for this feature is kernel debugging, for example when your machine crashes very early before the regular console code is initialized. Other uses include simpler, lockless logging instead of a full-blown printk console driver and klogd. Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Acked-by: Thomas Gleixner <tglx@linutronix.de> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mathias Nyman <mathias.nyman@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: linux-usb@vger.kernel.org Link: http://lkml.kernel.org/r/1490083293-3792-3-git-send-email-baolu.lu@linux.intel.com [ Small fix to the Kconfig help text. ] Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-03-21 16:01:30 +08:00
/**
* xhci-dbc.c - xHCI debug capability early driver
*
* Copyright (C) 2016 Intel Corporation
*
* Author: Lu Baolu <baolu.lu@linux.intel.com>
*/
#define pr_fmt(fmt) KBUILD_MODNAME ":%s: " fmt, __func__
#include <linux/console.h>
#include <linux/pci_regs.h>
#include <linux/pci_ids.h>
memblock: replace free_bootmem{_node} with memblock_free The free_bootmem and free_bootmem_node are merely wrappers for memblock_free. Replace their usage with a call to memblock_free using the following semantic patch: @@ expression e1, e2, e3; @@ ( - free_bootmem(e1, e2) + memblock_free(e1, e2) | - free_bootmem_node(e1, e2, e3) + memblock_free(e2, e3) ) Link: http://lkml.kernel.org/r/1536927045-23536-24-git-send-email-rppt@linux.vnet.ibm.com Signed-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Chris Zankel <chris@zankel.net> Cc: "David S. Miller" <davem@davemloft.net> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greentime Hu <green.hu@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Ingo Molnar <mingo@redhat.com> Cc: "James E.J. Bottomley" <jejb@parisc-linux.org> Cc: Jonas Bonn <jonas@southpole.se> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Ley Foon Tan <lftan@altera.com> Cc: Mark Salter <msalter@redhat.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Matt Turner <mattst88@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Simek <monstr@monstr.eu> Cc: Palmer Dabbelt <palmer@sifive.com> Cc: Paul Burton <paul.burton@mips.com> Cc: Richard Kuo <rkuo@codeaurora.org> Cc: Richard Weinberger <richard@nod.at> Cc: Rich Felker <dalias@libc.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Serge Semin <fancer.lancer@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-10-31 06:09:21 +08:00
#include <linux/memblock.h>
usb/early: Add driver for xhci debug capability XHCI debug capability (DbC) is an optional but standalone functionality provided by an xHCI host controller. Software learns this capability by walking through the extended capability list of the host. XHCI specification describes DbC in section 7.6. This patch introduces the code to probe and initialize the debug capability hardware during early boot. With hardware initialized, the debug target (system on which this code is running) will present a debug device through the debug port (normally the first USB3 port). The debug device is fully compliant with the USB framework and provides the equivalent of a very high performance (USB3) full-duplex serial link between the debug host and target. The DbC functionality is independent of the xHCI host. There isn't any precondition from the xHCI host side for the DbC to work. One use for this feature is kernel debugging, for example when your machine crashes very early before the regular console code is initialized. Other uses include simpler, lockless logging instead of a full-blown printk console driver and klogd. Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Acked-by: Thomas Gleixner <tglx@linutronix.de> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mathias Nyman <mathias.nyman@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: linux-usb@vger.kernel.org Link: http://lkml.kernel.org/r/1490083293-3792-3-git-send-email-baolu.lu@linux.intel.com [ Small fix to the Kconfig help text. ] Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-03-21 16:01:30 +08:00
#include <linux/io.h>
#include <asm/pci-direct.h>
#include <asm/fixmap.h>
#include <linux/bcd.h>
#include <linux/export.h>
#include <linux/version.h>
#include <linux/module.h>
#include <linux/delay.h>
#include <linux/kthread.h>
#include "../host/xhci.h"
#include "xhci-dbc.h"
static struct xdbc_state xdbc;
static bool early_console_keep;
#ifdef XDBC_TRACE
#define xdbc_trace trace_printk
#else
static inline void xdbc_trace(const char *fmt, ...) { }
#endif /* XDBC_TRACE */
static void __iomem * __init xdbc_map_pci_mmio(u32 bus, u32 dev, u32 func)
{
u64 val64, sz64, mask64;
void __iomem *base;
u32 val, sz;
u8 byte;
val = read_pci_config(bus, dev, func, PCI_BASE_ADDRESS_0);
write_pci_config(bus, dev, func, PCI_BASE_ADDRESS_0, ~0);
sz = read_pci_config(bus, dev, func, PCI_BASE_ADDRESS_0);
write_pci_config(bus, dev, func, PCI_BASE_ADDRESS_0, val);
if (val == 0xffffffff || sz == 0xffffffff) {
pr_notice("invalid mmio bar\n");
return NULL;
}
val64 = val & PCI_BASE_ADDRESS_MEM_MASK;
sz64 = sz & PCI_BASE_ADDRESS_MEM_MASK;
mask64 = PCI_BASE_ADDRESS_MEM_MASK;
if ((val & PCI_BASE_ADDRESS_MEM_TYPE_MASK) == PCI_BASE_ADDRESS_MEM_TYPE_64) {
val = read_pci_config(bus, dev, func, PCI_BASE_ADDRESS_0 + 4);
write_pci_config(bus, dev, func, PCI_BASE_ADDRESS_0 + 4, ~0);
sz = read_pci_config(bus, dev, func, PCI_BASE_ADDRESS_0 + 4);
write_pci_config(bus, dev, func, PCI_BASE_ADDRESS_0 + 4, val);
val64 |= (u64)val << 32;
sz64 |= (u64)sz << 32;
mask64 |= ~0ULL << 32;
}
sz64 &= mask64;
if (!sz64) {
pr_notice("invalid mmio address\n");
return NULL;
}
sz64 = 1ULL << __ffs64(sz64);
/* Check if the mem space is enabled: */
byte = read_pci_config_byte(bus, dev, func, PCI_COMMAND);
if (!(byte & PCI_COMMAND_MEMORY)) {
byte |= PCI_COMMAND_MEMORY;
write_pci_config_byte(bus, dev, func, PCI_COMMAND, byte);
}
xdbc.xhci_start = val64;
xdbc.xhci_length = sz64;
base = early_ioremap(val64, sz64);
return base;
}
static void * __init xdbc_get_page(dma_addr_t *dma_addr)
{
void *virt;
memblock: drop memblock_alloc_*_nopanic() variants As all the memblock allocation functions return NULL in case of error rather than panic(), the duplicates with _nopanic suffix can be removed. Link: http://lkml.kernel.org/r/1548057848-15136-22-git-send-email-rppt@linux.ibm.com Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: Petr Mladek <pmladek@suse.com> [printk] Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christophe Leroy <christophe.leroy@c-s.fr> Cc: Christoph Hellwig <hch@lst.de> Cc: "David S. Miller" <davem@davemloft.net> Cc: Dennis Zhou <dennis@kernel.org> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greentime Hu <green.hu@gmail.com> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Guo Ren <guoren@kernel.org> Cc: Guo Ren <ren_guo@c-sky.com> [c-sky] Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Juergen Gross <jgross@suse.com> [Xen] Cc: Mark Salter <msalter@redhat.com> Cc: Matt Turner <mattst88@gmail.com> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Simek <monstr@monstr.eu> Cc: Paul Burton <paul.burton@mips.com> Cc: Richard Weinberger <richard@nod.at> Cc: Rich Felker <dalias@libc.org> Cc: Rob Herring <robh+dt@kernel.org> Cc: Rob Herring <robh@kernel.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Stafford Horne <shorne@gmail.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-12 14:30:42 +08:00
virt = memblock_alloc(PAGE_SIZE, PAGE_SIZE);
usb/early: Add driver for xhci debug capability XHCI debug capability (DbC) is an optional but standalone functionality provided by an xHCI host controller. Software learns this capability by walking through the extended capability list of the host. XHCI specification describes DbC in section 7.6. This patch introduces the code to probe and initialize the debug capability hardware during early boot. With hardware initialized, the debug target (system on which this code is running) will present a debug device through the debug port (normally the first USB3 port). The debug device is fully compliant with the USB framework and provides the equivalent of a very high performance (USB3) full-duplex serial link between the debug host and target. The DbC functionality is independent of the xHCI host. There isn't any precondition from the xHCI host side for the DbC to work. One use for this feature is kernel debugging, for example when your machine crashes very early before the regular console code is initialized. Other uses include simpler, lockless logging instead of a full-blown printk console driver and klogd. Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Acked-by: Thomas Gleixner <tglx@linutronix.de> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mathias Nyman <mathias.nyman@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: linux-usb@vger.kernel.org Link: http://lkml.kernel.org/r/1490083293-3792-3-git-send-email-baolu.lu@linux.intel.com [ Small fix to the Kconfig help text. ] Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-03-21 16:01:30 +08:00
if (!virt)
return NULL;
if (dma_addr)
*dma_addr = (dma_addr_t)__pa(virt);
return virt;
}
static u32 __init xdbc_find_dbgp(int xdbc_num, u32 *b, u32 *d, u32 *f)
{
u32 bus, dev, func, class;
for (bus = 0; bus < XDBC_PCI_MAX_BUSES; bus++) {
for (dev = 0; dev < XDBC_PCI_MAX_DEVICES; dev++) {
for (func = 0; func < XDBC_PCI_MAX_FUNCTION; func++) {
class = read_pci_config(bus, dev, func, PCI_CLASS_REVISION);
if ((class >> 8) != PCI_CLASS_SERIAL_USB_XHCI)
continue;
if (xdbc_num-- != 0)
continue;
*b = bus;
*d = dev;
*f = func;
return 0;
}
}
}
return -1;
}
static int handshake(void __iomem *ptr, u32 mask, u32 done, int wait, int delay)
{
u32 result;
do {
result = readl(ptr);
result &= mask;
if (result == done)
return 0;
udelay(delay);
wait -= delay;
} while (wait > 0);
return -ETIMEDOUT;
}
static void __init xdbc_bios_handoff(void)
{
int offset, timeout;
u32 val;
offset = xhci_find_next_ext_cap(xdbc.xhci_base, 0, XHCI_EXT_CAPS_LEGACY);
val = readl(xdbc.xhci_base + offset);
if (val & XHCI_HC_BIOS_OWNED) {
writel(val | XHCI_HC_OS_OWNED, xdbc.xhci_base + offset);
timeout = handshake(xdbc.xhci_base + offset, XHCI_HC_BIOS_OWNED, 0, 5000, 10);
if (timeout) {
pr_notice("failed to hand over xHCI control from BIOS\n");
writel(val & ~XHCI_HC_BIOS_OWNED, xdbc.xhci_base + offset);
}
}
/* Disable BIOS SMIs and clear all SMI events: */
val = readl(xdbc.xhci_base + offset + XHCI_LEGACY_CONTROL_OFFSET);
val &= XHCI_LEGACY_DISABLE_SMI;
val |= XHCI_LEGACY_SMI_EVENTS;
writel(val, xdbc.xhci_base + offset + XHCI_LEGACY_CONTROL_OFFSET);
}
static int __init
xdbc_alloc_ring(struct xdbc_segment *seg, struct xdbc_ring *ring)
{
seg->trbs = xdbc_get_page(&seg->dma);
if (!seg->trbs)
return -ENOMEM;
ring->segment = seg;
return 0;
}
static void __init xdbc_free_ring(struct xdbc_ring *ring)
{
struct xdbc_segment *seg = ring->segment;
if (!seg)
return;
memblock: replace free_bootmem{_node} with memblock_free The free_bootmem and free_bootmem_node are merely wrappers for memblock_free. Replace their usage with a call to memblock_free using the following semantic patch: @@ expression e1, e2, e3; @@ ( - free_bootmem(e1, e2) + memblock_free(e1, e2) | - free_bootmem_node(e1, e2, e3) + memblock_free(e2, e3) ) Link: http://lkml.kernel.org/r/1536927045-23536-24-git-send-email-rppt@linux.vnet.ibm.com Signed-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Chris Zankel <chris@zankel.net> Cc: "David S. Miller" <davem@davemloft.net> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greentime Hu <green.hu@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Ingo Molnar <mingo@redhat.com> Cc: "James E.J. Bottomley" <jejb@parisc-linux.org> Cc: Jonas Bonn <jonas@southpole.se> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Ley Foon Tan <lftan@altera.com> Cc: Mark Salter <msalter@redhat.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Matt Turner <mattst88@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Simek <monstr@monstr.eu> Cc: Palmer Dabbelt <palmer@sifive.com> Cc: Paul Burton <paul.burton@mips.com> Cc: Richard Kuo <rkuo@codeaurora.org> Cc: Richard Weinberger <richard@nod.at> Cc: Rich Felker <dalias@libc.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Serge Semin <fancer.lancer@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-10-31 06:09:21 +08:00
memblock_free(seg->dma, PAGE_SIZE);
usb/early: Add driver for xhci debug capability XHCI debug capability (DbC) is an optional but standalone functionality provided by an xHCI host controller. Software learns this capability by walking through the extended capability list of the host. XHCI specification describes DbC in section 7.6. This patch introduces the code to probe and initialize the debug capability hardware during early boot. With hardware initialized, the debug target (system on which this code is running) will present a debug device through the debug port (normally the first USB3 port). The debug device is fully compliant with the USB framework and provides the equivalent of a very high performance (USB3) full-duplex serial link between the debug host and target. The DbC functionality is independent of the xHCI host. There isn't any precondition from the xHCI host side for the DbC to work. One use for this feature is kernel debugging, for example when your machine crashes very early before the regular console code is initialized. Other uses include simpler, lockless logging instead of a full-blown printk console driver and klogd. Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Acked-by: Thomas Gleixner <tglx@linutronix.de> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mathias Nyman <mathias.nyman@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: linux-usb@vger.kernel.org Link: http://lkml.kernel.org/r/1490083293-3792-3-git-send-email-baolu.lu@linux.intel.com [ Small fix to the Kconfig help text. ] Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-03-21 16:01:30 +08:00
ring->segment = NULL;
}
static void xdbc_reset_ring(struct xdbc_ring *ring)
{
struct xdbc_segment *seg = ring->segment;
struct xdbc_trb *link_trb;
memset(seg->trbs, 0, PAGE_SIZE);
ring->enqueue = seg->trbs;
ring->dequeue = seg->trbs;
ring->cycle_state = 1;
if (ring != &xdbc.evt_ring) {
link_trb = &seg->trbs[XDBC_TRBS_PER_SEGMENT - 1];
link_trb->field[0] = cpu_to_le32(lower_32_bits(seg->dma));
link_trb->field[1] = cpu_to_le32(upper_32_bits(seg->dma));
link_trb->field[3] = cpu_to_le32(TRB_TYPE(TRB_LINK)) | cpu_to_le32(LINK_TOGGLE);
}
}
static inline void xdbc_put_utf16(u16 *s, const char *c, size_t size)
{
int i;
for (i = 0; i < size; i++)
s[i] = cpu_to_le16(c[i]);
}
static void xdbc_mem_init(void)
{
struct xdbc_ep_context *ep_in, *ep_out;
struct usb_string_descriptor *s_desc;
struct xdbc_erst_entry *entry;
struct xdbc_strings *strings;
struct xdbc_context *ctx;
unsigned int max_burst;
u32 string_length;
int index = 0;
u32 dev_info;
xdbc_reset_ring(&xdbc.evt_ring);
xdbc_reset_ring(&xdbc.in_ring);
xdbc_reset_ring(&xdbc.out_ring);
memset(xdbc.table_base, 0, PAGE_SIZE);
memset(xdbc.out_buf, 0, PAGE_SIZE);
/* Initialize event ring segment table: */
xdbc.erst_size = 16;
xdbc.erst_base = xdbc.table_base + index * XDBC_TABLE_ENTRY_SIZE;
xdbc.erst_dma = xdbc.table_dma + index * XDBC_TABLE_ENTRY_SIZE;
index += XDBC_ERST_ENTRY_NUM;
entry = (struct xdbc_erst_entry *)xdbc.erst_base;
entry->seg_addr = cpu_to_le64(xdbc.evt_seg.dma);
entry->seg_size = cpu_to_le32(XDBC_TRBS_PER_SEGMENT);
entry->__reserved_0 = 0;
/* Initialize ERST registers: */
writel(1, &xdbc.xdbc_reg->ersts);
xdbc_write64(xdbc.erst_dma, &xdbc.xdbc_reg->erstba);
xdbc_write64(xdbc.evt_seg.dma, &xdbc.xdbc_reg->erdp);
/* Debug capability contexts: */
xdbc.dbcc_size = 64 * 3;
xdbc.dbcc_base = xdbc.table_base + index * XDBC_TABLE_ENTRY_SIZE;
xdbc.dbcc_dma = xdbc.table_dma + index * XDBC_TABLE_ENTRY_SIZE;
index += XDBC_DBCC_ENTRY_NUM;
/* Popluate the strings: */
xdbc.string_size = sizeof(struct xdbc_strings);
xdbc.string_base = xdbc.table_base + index * XDBC_TABLE_ENTRY_SIZE;
xdbc.string_dma = xdbc.table_dma + index * XDBC_TABLE_ENTRY_SIZE;
strings = (struct xdbc_strings *)xdbc.string_base;
index += XDBC_STRING_ENTRY_NUM;
/* Serial string: */
s_desc = (struct usb_string_descriptor *)strings->serial;
s_desc->bLength = (strlen(XDBC_STRING_SERIAL) + 1) * 2;
s_desc->bDescriptorType = USB_DT_STRING;
xdbc_put_utf16(s_desc->wData, XDBC_STRING_SERIAL, strlen(XDBC_STRING_SERIAL));
string_length = s_desc->bLength;
string_length <<= 8;
/* Product string: */
s_desc = (struct usb_string_descriptor *)strings->product;
s_desc->bLength = (strlen(XDBC_STRING_PRODUCT) + 1) * 2;
s_desc->bDescriptorType = USB_DT_STRING;
xdbc_put_utf16(s_desc->wData, XDBC_STRING_PRODUCT, strlen(XDBC_STRING_PRODUCT));
string_length += s_desc->bLength;
string_length <<= 8;
/* Manufacture string: */
s_desc = (struct usb_string_descriptor *)strings->manufacturer;
s_desc->bLength = (strlen(XDBC_STRING_MANUFACTURER) + 1) * 2;
s_desc->bDescriptorType = USB_DT_STRING;
xdbc_put_utf16(s_desc->wData, XDBC_STRING_MANUFACTURER, strlen(XDBC_STRING_MANUFACTURER));
string_length += s_desc->bLength;
string_length <<= 8;
/* String0: */
strings->string0[0] = 4;
strings->string0[1] = USB_DT_STRING;
strings->string0[2] = 0x09;
strings->string0[3] = 0x04;
string_length += 4;
/* Populate info Context: */
ctx = (struct xdbc_context *)xdbc.dbcc_base;
ctx->info.string0 = cpu_to_le64(xdbc.string_dma);
ctx->info.manufacturer = cpu_to_le64(xdbc.string_dma + XDBC_MAX_STRING_LENGTH);
ctx->info.product = cpu_to_le64(xdbc.string_dma + XDBC_MAX_STRING_LENGTH * 2);
ctx->info.serial = cpu_to_le64(xdbc.string_dma + XDBC_MAX_STRING_LENGTH * 3);
ctx->info.length = cpu_to_le32(string_length);
/* Populate bulk out endpoint context: */
max_burst = DEBUG_MAX_BURST(readl(&xdbc.xdbc_reg->control));
ep_out = (struct xdbc_ep_context *)&ctx->out;
ep_out->ep_info1 = 0;
ep_out->ep_info2 = cpu_to_le32(EP_TYPE(BULK_OUT_EP) | MAX_PACKET(1024) | MAX_BURST(max_burst));
ep_out->deq = cpu_to_le64(xdbc.out_seg.dma | xdbc.out_ring.cycle_state);
/* Populate bulk in endpoint context: */
ep_in = (struct xdbc_ep_context *)&ctx->in;
ep_in->ep_info1 = 0;
ep_in->ep_info2 = cpu_to_le32(EP_TYPE(BULK_IN_EP) | MAX_PACKET(1024) | MAX_BURST(max_burst));
usb/early: Add driver for xhci debug capability XHCI debug capability (DbC) is an optional but standalone functionality provided by an xHCI host controller. Software learns this capability by walking through the extended capability list of the host. XHCI specification describes DbC in section 7.6. This patch introduces the code to probe and initialize the debug capability hardware during early boot. With hardware initialized, the debug target (system on which this code is running) will present a debug device through the debug port (normally the first USB3 port). The debug device is fully compliant with the USB framework and provides the equivalent of a very high performance (USB3) full-duplex serial link between the debug host and target. The DbC functionality is independent of the xHCI host. There isn't any precondition from the xHCI host side for the DbC to work. One use for this feature is kernel debugging, for example when your machine crashes very early before the regular console code is initialized. Other uses include simpler, lockless logging instead of a full-blown printk console driver and klogd. Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Acked-by: Thomas Gleixner <tglx@linutronix.de> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mathias Nyman <mathias.nyman@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: linux-usb@vger.kernel.org Link: http://lkml.kernel.org/r/1490083293-3792-3-git-send-email-baolu.lu@linux.intel.com [ Small fix to the Kconfig help text. ] Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-03-21 16:01:30 +08:00
ep_in->deq = cpu_to_le64(xdbc.in_seg.dma | xdbc.in_ring.cycle_state);
/* Set DbC context and info registers: */
xdbc_write64(xdbc.dbcc_dma, &xdbc.xdbc_reg->dccp);
dev_info = cpu_to_le32((XDBC_VENDOR_ID << 16) | XDBC_PROTOCOL);
writel(dev_info, &xdbc.xdbc_reg->devinfo1);
dev_info = cpu_to_le32((XDBC_DEVICE_REV << 16) | XDBC_PRODUCT_ID);
writel(dev_info, &xdbc.xdbc_reg->devinfo2);
xdbc.in_buf = xdbc.out_buf + XDBC_MAX_PACKET;
xdbc.in_dma = xdbc.out_dma + XDBC_MAX_PACKET;
}
static void xdbc_do_reset_debug_port(u32 id, u32 count)
{
void __iomem *ops_reg;
void __iomem *portsc;
u32 val, cap_length;
int i;
cap_length = readl(xdbc.xhci_base) & 0xff;
ops_reg = xdbc.xhci_base + cap_length;
id--;
for (i = id; i < (id + count); i++) {
portsc = ops_reg + 0x400 + i * 0x10;
val = readl(portsc);
if (!(val & PORT_CONNECT))
writel(val | PORT_RESET, portsc);
}
}
static void xdbc_reset_debug_port(void)
{
u32 val, port_offset, port_count;
int offset = 0;
do {
offset = xhci_find_next_ext_cap(xdbc.xhci_base, offset, XHCI_EXT_CAPS_PROTOCOL);
if (!offset)
break;
val = readl(xdbc.xhci_base + offset);
if (XHCI_EXT_PORT_MAJOR(val) != 0x3)
continue;
val = readl(xdbc.xhci_base + offset + 8);
port_offset = XHCI_EXT_PORT_OFF(val);
port_count = XHCI_EXT_PORT_COUNT(val);
xdbc_do_reset_debug_port(port_offset, port_count);
} while (1);
}
static void
xdbc_queue_trb(struct xdbc_ring *ring, u32 field1, u32 field2, u32 field3, u32 field4)
{
struct xdbc_trb *trb, *link_trb;
trb = ring->enqueue;
trb->field[0] = cpu_to_le32(field1);
trb->field[1] = cpu_to_le32(field2);
trb->field[2] = cpu_to_le32(field3);
trb->field[3] = cpu_to_le32(field4);
++(ring->enqueue);
if (ring->enqueue >= &ring->segment->trbs[TRBS_PER_SEGMENT - 1]) {
link_trb = ring->enqueue;
if (ring->cycle_state)
link_trb->field[3] |= cpu_to_le32(TRB_CYCLE);
else
link_trb->field[3] &= cpu_to_le32(~TRB_CYCLE);
ring->enqueue = ring->segment->trbs;
ring->cycle_state ^= 1;
}
}
static void xdbc_ring_doorbell(int target)
{
writel(DOOR_BELL_TARGET(target), &xdbc.xdbc_reg->doorbell);
}
static int xdbc_start(void)
{
u32 ctrl, status;
int ret;
ctrl = readl(&xdbc.xdbc_reg->control);
writel(ctrl | CTRL_DBC_ENABLE | CTRL_PORT_ENABLE, &xdbc.xdbc_reg->control);
ret = handshake(&xdbc.xdbc_reg->control, CTRL_DBC_ENABLE, CTRL_DBC_ENABLE, 100000, 100);
if (ret) {
xdbc_trace("failed to initialize hardware\n");
return ret;
}
/* Reset port to avoid bus hang: */
if (xdbc.vendor == PCI_VENDOR_ID_INTEL)
xdbc_reset_debug_port();
/* Wait for port connection: */
ret = handshake(&xdbc.xdbc_reg->portsc, PORTSC_CONN_STATUS, PORTSC_CONN_STATUS, 5000000, 100);
if (ret) {
xdbc_trace("waiting for connection timed out\n");
return ret;
}
/* Wait for debug device to be configured: */
ret = handshake(&xdbc.xdbc_reg->control, CTRL_DBC_RUN, CTRL_DBC_RUN, 5000000, 100);
if (ret) {
xdbc_trace("waiting for device configuration timed out\n");
return ret;
}
/* Check port number: */
status = readl(&xdbc.xdbc_reg->status);
if (!DCST_DEBUG_PORT(status)) {
xdbc_trace("invalid root hub port number\n");
return -ENODEV;
}
xdbc.port_number = DCST_DEBUG_PORT(status);
xdbc_trace("DbC is running now, control 0x%08x port ID %d\n",
readl(&xdbc.xdbc_reg->control), xdbc.port_number);
return 0;
}
static int xdbc_bulk_transfer(void *data, int size, bool read)
{
struct xdbc_ring *ring;
struct xdbc_trb *trb;
u32 length, control;
u32 cycle;
u64 addr;
if (size > XDBC_MAX_PACKET) {
xdbc_trace("bad parameter, size %d\n", size);
return -EINVAL;
}
if (!(xdbc.flags & XDBC_FLAGS_INITIALIZED) ||
!(xdbc.flags & XDBC_FLAGS_CONFIGURED) ||
(!read && (xdbc.flags & XDBC_FLAGS_OUT_STALL)) ||
(read && (xdbc.flags & XDBC_FLAGS_IN_STALL))) {
xdbc_trace("connection not ready, flags %08x\n", xdbc.flags);
return -EIO;
}
ring = (read ? &xdbc.in_ring : &xdbc.out_ring);
trb = ring->enqueue;
cycle = ring->cycle_state;
length = TRB_LEN(size);
control = TRB_TYPE(TRB_NORMAL) | TRB_IOC;
if (cycle)
control &= cpu_to_le32(~TRB_CYCLE);
else
control |= cpu_to_le32(TRB_CYCLE);
if (read) {
memset(xdbc.in_buf, 0, XDBC_MAX_PACKET);
addr = xdbc.in_dma;
xdbc.flags |= XDBC_FLAGS_IN_PROCESS;
} else {
memset(xdbc.out_buf, 0, XDBC_MAX_PACKET);
memcpy(xdbc.out_buf, data, size);
addr = xdbc.out_dma;
xdbc.flags |= XDBC_FLAGS_OUT_PROCESS;
}
xdbc_queue_trb(ring, lower_32_bits(addr), upper_32_bits(addr), length, control);
/*
* Add a barrier between writes of trb fields and flipping
* the cycle bit:
*/
wmb();
if (cycle)
trb->field[3] |= cpu_to_le32(cycle);
else
trb->field[3] &= cpu_to_le32(~TRB_CYCLE);
xdbc_ring_doorbell(read ? IN_EP_DOORBELL : OUT_EP_DOORBELL);
return size;
}
static int xdbc_handle_external_reset(void)
{
int ret = 0;
xdbc.flags = 0;
writel(0, &xdbc.xdbc_reg->control);
ret = handshake(&xdbc.xdbc_reg->control, CTRL_DBC_ENABLE, 0, 100000, 10);
if (ret)
goto reset_out;
xdbc_mem_init();
ret = xdbc_start();
if (ret < 0)
goto reset_out;
xdbc_trace("dbc recovered\n");
xdbc.flags |= XDBC_FLAGS_INITIALIZED | XDBC_FLAGS_CONFIGURED;
xdbc_bulk_transfer(NULL, XDBC_MAX_PACKET, true);
return 0;
reset_out:
xdbc_trace("failed to recover from external reset\n");
return ret;
}
static int __init xdbc_early_setup(void)
{
int ret;
writel(0, &xdbc.xdbc_reg->control);
ret = handshake(&xdbc.xdbc_reg->control, CTRL_DBC_ENABLE, 0, 100000, 100);
if (ret)
return ret;
/* Allocate the table page: */
xdbc.table_base = xdbc_get_page(&xdbc.table_dma);
if (!xdbc.table_base)
return -ENOMEM;
/* Get and store the transfer buffer: */
xdbc.out_buf = xdbc_get_page(&xdbc.out_dma);
if (!xdbc.out_buf)
return -ENOMEM;
/* Allocate the event ring: */
ret = xdbc_alloc_ring(&xdbc.evt_seg, &xdbc.evt_ring);
if (ret < 0)
return ret;
/* Allocate IN/OUT endpoint transfer rings: */
ret = xdbc_alloc_ring(&xdbc.in_seg, &xdbc.in_ring);
if (ret < 0)
return ret;
ret = xdbc_alloc_ring(&xdbc.out_seg, &xdbc.out_ring);
if (ret < 0)
return ret;
xdbc_mem_init();
ret = xdbc_start();
if (ret < 0) {
writel(0, &xdbc.xdbc_reg->control);
return ret;
}
xdbc.flags |= XDBC_FLAGS_INITIALIZED | XDBC_FLAGS_CONFIGURED;
xdbc_bulk_transfer(NULL, XDBC_MAX_PACKET, true);
return 0;
}
int __init early_xdbc_parse_parameter(char *s)
{
unsigned long dbgp_num = 0;
u32 bus, dev, func, offset;
int ret;
if (!early_pci_allowed())
return -EPERM;
if (strstr(s, "keep"))
early_console_keep = true;
if (xdbc.xdbc_reg)
return 0;
if (*s && kstrtoul(s, 0, &dbgp_num))
dbgp_num = 0;
pr_notice("dbgp_num: %lu\n", dbgp_num);
/* Locate the host controller: */
ret = xdbc_find_dbgp(dbgp_num, &bus, &dev, &func);
if (ret) {
pr_notice("failed to locate xhci host\n");
return -ENODEV;
}
xdbc.vendor = read_pci_config_16(bus, dev, func, PCI_VENDOR_ID);
xdbc.device = read_pci_config_16(bus, dev, func, PCI_DEVICE_ID);
xdbc.bus = bus;
xdbc.dev = dev;
xdbc.func = func;
/* Map the IO memory: */
xdbc.xhci_base = xdbc_map_pci_mmio(bus, dev, func);
if (!xdbc.xhci_base)
return -EINVAL;
/* Locate DbC registers: */
offset = xhci_find_next_ext_cap(xdbc.xhci_base, 0, XHCI_EXT_CAPS_DEBUG);
if (!offset) {
pr_notice("xhci host doesn't support debug capability\n");
early_iounmap(xdbc.xhci_base, xdbc.xhci_length);
xdbc.xhci_base = NULL;
xdbc.xhci_length = 0;
return -ENODEV;
}
xdbc.xdbc_reg = (struct xdbc_regs __iomem *)(xdbc.xhci_base + offset);
return 0;
}
int __init early_xdbc_setup_hardware(void)
{
int ret;
if (!xdbc.xdbc_reg)
return -ENODEV;
xdbc_bios_handoff();
raw_spin_lock_init(&xdbc.lock);
ret = xdbc_early_setup();
if (ret) {
pr_notice("failed to setup the connection to host\n");
xdbc_free_ring(&xdbc.evt_ring);
xdbc_free_ring(&xdbc.out_ring);
xdbc_free_ring(&xdbc.in_ring);
if (xdbc.table_dma)
memblock: replace free_bootmem{_node} with memblock_free The free_bootmem and free_bootmem_node are merely wrappers for memblock_free. Replace their usage with a call to memblock_free using the following semantic patch: @@ expression e1, e2, e3; @@ ( - free_bootmem(e1, e2) + memblock_free(e1, e2) | - free_bootmem_node(e1, e2, e3) + memblock_free(e2, e3) ) Link: http://lkml.kernel.org/r/1536927045-23536-24-git-send-email-rppt@linux.vnet.ibm.com Signed-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Chris Zankel <chris@zankel.net> Cc: "David S. Miller" <davem@davemloft.net> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greentime Hu <green.hu@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Ingo Molnar <mingo@redhat.com> Cc: "James E.J. Bottomley" <jejb@parisc-linux.org> Cc: Jonas Bonn <jonas@southpole.se> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Ley Foon Tan <lftan@altera.com> Cc: Mark Salter <msalter@redhat.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Matt Turner <mattst88@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Simek <monstr@monstr.eu> Cc: Palmer Dabbelt <palmer@sifive.com> Cc: Paul Burton <paul.burton@mips.com> Cc: Richard Kuo <rkuo@codeaurora.org> Cc: Richard Weinberger <richard@nod.at> Cc: Rich Felker <dalias@libc.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Serge Semin <fancer.lancer@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-10-31 06:09:21 +08:00
memblock_free(xdbc.table_dma, PAGE_SIZE);
usb/early: Add driver for xhci debug capability XHCI debug capability (DbC) is an optional but standalone functionality provided by an xHCI host controller. Software learns this capability by walking through the extended capability list of the host. XHCI specification describes DbC in section 7.6. This patch introduces the code to probe and initialize the debug capability hardware during early boot. With hardware initialized, the debug target (system on which this code is running) will present a debug device through the debug port (normally the first USB3 port). The debug device is fully compliant with the USB framework and provides the equivalent of a very high performance (USB3) full-duplex serial link between the debug host and target. The DbC functionality is independent of the xHCI host. There isn't any precondition from the xHCI host side for the DbC to work. One use for this feature is kernel debugging, for example when your machine crashes very early before the regular console code is initialized. Other uses include simpler, lockless logging instead of a full-blown printk console driver and klogd. Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Acked-by: Thomas Gleixner <tglx@linutronix.de> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mathias Nyman <mathias.nyman@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: linux-usb@vger.kernel.org Link: http://lkml.kernel.org/r/1490083293-3792-3-git-send-email-baolu.lu@linux.intel.com [ Small fix to the Kconfig help text. ] Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-03-21 16:01:30 +08:00
if (xdbc.out_dma)
memblock: replace free_bootmem{_node} with memblock_free The free_bootmem and free_bootmem_node are merely wrappers for memblock_free. Replace their usage with a call to memblock_free using the following semantic patch: @@ expression e1, e2, e3; @@ ( - free_bootmem(e1, e2) + memblock_free(e1, e2) | - free_bootmem_node(e1, e2, e3) + memblock_free(e2, e3) ) Link: http://lkml.kernel.org/r/1536927045-23536-24-git-send-email-rppt@linux.vnet.ibm.com Signed-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Chris Zankel <chris@zankel.net> Cc: "David S. Miller" <davem@davemloft.net> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greentime Hu <green.hu@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Ingo Molnar <mingo@redhat.com> Cc: "James E.J. Bottomley" <jejb@parisc-linux.org> Cc: Jonas Bonn <jonas@southpole.se> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Ley Foon Tan <lftan@altera.com> Cc: Mark Salter <msalter@redhat.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Matt Turner <mattst88@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Simek <monstr@monstr.eu> Cc: Palmer Dabbelt <palmer@sifive.com> Cc: Paul Burton <paul.burton@mips.com> Cc: Richard Kuo <rkuo@codeaurora.org> Cc: Richard Weinberger <richard@nod.at> Cc: Rich Felker <dalias@libc.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Serge Semin <fancer.lancer@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-10-31 06:09:21 +08:00
memblock_free(xdbc.out_dma, PAGE_SIZE);
usb/early: Add driver for xhci debug capability XHCI debug capability (DbC) is an optional but standalone functionality provided by an xHCI host controller. Software learns this capability by walking through the extended capability list of the host. XHCI specification describes DbC in section 7.6. This patch introduces the code to probe and initialize the debug capability hardware during early boot. With hardware initialized, the debug target (system on which this code is running) will present a debug device through the debug port (normally the first USB3 port). The debug device is fully compliant with the USB framework and provides the equivalent of a very high performance (USB3) full-duplex serial link between the debug host and target. The DbC functionality is independent of the xHCI host. There isn't any precondition from the xHCI host side for the DbC to work. One use for this feature is kernel debugging, for example when your machine crashes very early before the regular console code is initialized. Other uses include simpler, lockless logging instead of a full-blown printk console driver and klogd. Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Acked-by: Thomas Gleixner <tglx@linutronix.de> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mathias Nyman <mathias.nyman@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: linux-usb@vger.kernel.org Link: http://lkml.kernel.org/r/1490083293-3792-3-git-send-email-baolu.lu@linux.intel.com [ Small fix to the Kconfig help text. ] Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-03-21 16:01:30 +08:00
xdbc.table_base = NULL;
xdbc.out_buf = NULL;
}
return ret;
}
static void xdbc_handle_port_status(struct xdbc_trb *evt_trb)
{
u32 port_reg;
port_reg = readl(&xdbc.xdbc_reg->portsc);
if (port_reg & PORTSC_CONN_CHANGE) {
xdbc_trace("connect status change event\n");
/* Check whether cable unplugged: */
if (!(port_reg & PORTSC_CONN_STATUS)) {
xdbc.flags = 0;
xdbc_trace("cable unplugged\n");
}
}
if (port_reg & PORTSC_RESET_CHANGE)
xdbc_trace("port reset change event\n");
if (port_reg & PORTSC_LINK_CHANGE)
xdbc_trace("port link status change event\n");
if (port_reg & PORTSC_CONFIG_CHANGE)
xdbc_trace("config error change\n");
/* Write back the value to clear RW1C bits: */
writel(port_reg, &xdbc.xdbc_reg->portsc);
}
static void xdbc_handle_tx_event(struct xdbc_trb *evt_trb)
{
u32 comp_code;
int ep_id;
comp_code = GET_COMP_CODE(le32_to_cpu(evt_trb->field[2]));
ep_id = TRB_TO_EP_ID(le32_to_cpu(evt_trb->field[3]));
switch (comp_code) {
case COMP_SUCCESS:
case COMP_SHORT_PACKET:
break;
case COMP_TRB_ERROR:
case COMP_BABBLE_DETECTED_ERROR:
case COMP_USB_TRANSACTION_ERROR:
case COMP_STALL_ERROR:
default:
if (ep_id == XDBC_EPID_OUT)
xdbc.flags |= XDBC_FLAGS_OUT_STALL;
if (ep_id == XDBC_EPID_IN)
xdbc.flags |= XDBC_FLAGS_IN_STALL;
xdbc_trace("endpoint %d stalled\n", ep_id);
break;
}
if (ep_id == XDBC_EPID_IN) {
xdbc.flags &= ~XDBC_FLAGS_IN_PROCESS;
xdbc_bulk_transfer(NULL, XDBC_MAX_PACKET, true);
} else if (ep_id == XDBC_EPID_OUT) {
xdbc.flags &= ~XDBC_FLAGS_OUT_PROCESS;
} else {
xdbc_trace("invalid endpoint id %d\n", ep_id);
}
}
static void xdbc_handle_events(void)
{
struct xdbc_trb *evt_trb;
bool update_erdp = false;
u32 reg;
u8 cmd;
cmd = read_pci_config_byte(xdbc.bus, xdbc.dev, xdbc.func, PCI_COMMAND);
if (!(cmd & PCI_COMMAND_MASTER)) {
cmd |= PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY;
write_pci_config_byte(xdbc.bus, xdbc.dev, xdbc.func, PCI_COMMAND, cmd);
}
if (!(xdbc.flags & XDBC_FLAGS_INITIALIZED))
return;
/* Handle external reset events: */
reg = readl(&xdbc.xdbc_reg->control);
if (!(reg & CTRL_DBC_ENABLE)) {
if (xdbc_handle_external_reset()) {
xdbc_trace("failed to recover connection\n");
return;
}
}
/* Handle configure-exit event: */
reg = readl(&xdbc.xdbc_reg->control);
if (reg & CTRL_DBC_RUN_CHANGE) {
writel(reg, &xdbc.xdbc_reg->control);
if (reg & CTRL_DBC_RUN)
xdbc.flags |= XDBC_FLAGS_CONFIGURED;
else
xdbc.flags &= ~XDBC_FLAGS_CONFIGURED;
}
/* Handle endpoint stall event: */
reg = readl(&xdbc.xdbc_reg->control);
if (reg & CTRL_HALT_IN_TR) {
xdbc.flags |= XDBC_FLAGS_IN_STALL;
} else {
xdbc.flags &= ~XDBC_FLAGS_IN_STALL;
if (!(xdbc.flags & XDBC_FLAGS_IN_PROCESS))
xdbc_bulk_transfer(NULL, XDBC_MAX_PACKET, true);
}
if (reg & CTRL_HALT_OUT_TR)
xdbc.flags |= XDBC_FLAGS_OUT_STALL;
else
xdbc.flags &= ~XDBC_FLAGS_OUT_STALL;
/* Handle the events in the event ring: */
evt_trb = xdbc.evt_ring.dequeue;
while ((le32_to_cpu(evt_trb->field[3]) & TRB_CYCLE) == xdbc.evt_ring.cycle_state) {
/*
* Add a barrier between reading the cycle flag and any
* reads of the event's flags/data below:
*/
rmb();
switch ((le32_to_cpu(evt_trb->field[3]) & TRB_TYPE_BITMASK)) {
case TRB_TYPE(TRB_PORT_STATUS):
xdbc_handle_port_status(evt_trb);
break;
case TRB_TYPE(TRB_TRANSFER):
xdbc_handle_tx_event(evt_trb);
break;
default:
break;
}
++(xdbc.evt_ring.dequeue);
if (xdbc.evt_ring.dequeue == &xdbc.evt_seg.trbs[TRBS_PER_SEGMENT]) {
xdbc.evt_ring.dequeue = xdbc.evt_seg.trbs;
xdbc.evt_ring.cycle_state ^= 1;
}
evt_trb = xdbc.evt_ring.dequeue;
update_erdp = true;
}
/* Update event ring dequeue pointer: */
if (update_erdp)
xdbc_write64(__pa(xdbc.evt_ring.dequeue), &xdbc.xdbc_reg->erdp);
}
static int xdbc_bulk_write(const char *bytes, int size)
{
int ret, timeout = 0;
unsigned long flags;
retry:
if (in_nmi()) {
if (!raw_spin_trylock_irqsave(&xdbc.lock, flags))
return -EAGAIN;
} else {
raw_spin_lock_irqsave(&xdbc.lock, flags);
}
xdbc_handle_events();
/* Check completion of the previous request: */
if ((xdbc.flags & XDBC_FLAGS_OUT_PROCESS) && (timeout < 2000000)) {
raw_spin_unlock_irqrestore(&xdbc.lock, flags);
udelay(100);
timeout += 100;
goto retry;
}
if (xdbc.flags & XDBC_FLAGS_OUT_PROCESS) {
raw_spin_unlock_irqrestore(&xdbc.lock, flags);
xdbc_trace("previous transfer not completed yet\n");
return -ETIMEDOUT;
}
ret = xdbc_bulk_transfer((void *)bytes, size, false);
raw_spin_unlock_irqrestore(&xdbc.lock, flags);
return ret;
}
static void early_xdbc_write(struct console *con, const char *str, u32 n)
{
static char buf[XDBC_MAX_PACKET];
int chunk, ret;
int use_cr = 0;
if (!xdbc.xdbc_reg)
return;
memset(buf, 0, XDBC_MAX_PACKET);
while (n > 0) {
for (chunk = 0; chunk < XDBC_MAX_PACKET && n > 0; str++, chunk++, n--) {
if (!use_cr && *str == '\n') {
use_cr = 1;
buf[chunk] = '\r';
str--;
n++;
continue;
}
if (use_cr)
use_cr = 0;
buf[chunk] = *str;
}
if (chunk > 0) {
ret = xdbc_bulk_write(buf, chunk);
if (ret < 0)
xdbc_trace("missed message {%s}\n", buf);
}
}
}
static struct console early_xdbc_console = {
.name = "earlyxdbc",
.write = early_xdbc_write,
.flags = CON_PRINTBUFFER,
.index = -1,
};
void __init early_xdbc_register_console(void)
{
if (early_console)
return;
early_console = &early_xdbc_console;
if (early_console_keep)
early_console->flags &= ~CON_BOOT;
else
early_console->flags |= CON_BOOT;
register_console(early_console);
}
static void xdbc_unregister_console(void)
{
if (early_xdbc_console.flags & CON_ENABLED)
unregister_console(&early_xdbc_console);
}
static int xdbc_scrub_function(void *ptr)
{
unsigned long flags;
while (true) {
raw_spin_lock_irqsave(&xdbc.lock, flags);
xdbc_handle_events();
if (!(xdbc.flags & XDBC_FLAGS_INITIALIZED)) {
raw_spin_unlock_irqrestore(&xdbc.lock, flags);
break;
}
raw_spin_unlock_irqrestore(&xdbc.lock, flags);
schedule_timeout_interruptible(1);
}
xdbc_unregister_console();
writel(0, &xdbc.xdbc_reg->control);
xdbc_trace("dbc scrub function exits\n");
return 0;
}
static int __init xdbc_init(void)
{
unsigned long flags;
void __iomem *base;
int ret = 0;
u32 offset;
if (!(xdbc.flags & XDBC_FLAGS_INITIALIZED))
return 0;
/*
* It's time to shut down the DbC, so that the debug
* port can be reused by the host controller:
*/
if (early_xdbc_console.index == -1 ||
(early_xdbc_console.flags & CON_BOOT)) {
xdbc_trace("hardware not used anymore\n");
goto free_and_quit;
}
base = ioremap_nocache(xdbc.xhci_start, xdbc.xhci_length);
if (!base) {
xdbc_trace("failed to remap the io address\n");
ret = -ENOMEM;
goto free_and_quit;
}
raw_spin_lock_irqsave(&xdbc.lock, flags);
early_iounmap(xdbc.xhci_base, xdbc.xhci_length);
xdbc.xhci_base = base;
offset = xhci_find_next_ext_cap(xdbc.xhci_base, 0, XHCI_EXT_CAPS_DEBUG);
xdbc.xdbc_reg = (struct xdbc_regs __iomem *)(xdbc.xhci_base + offset);
raw_spin_unlock_irqrestore(&xdbc.lock, flags);
kthread_run(xdbc_scrub_function, NULL, "%s", "xdbc");
return 0;
free_and_quit:
xdbc_free_ring(&xdbc.evt_ring);
xdbc_free_ring(&xdbc.out_ring);
xdbc_free_ring(&xdbc.in_ring);
memblock: replace free_bootmem{_node} with memblock_free The free_bootmem and free_bootmem_node are merely wrappers for memblock_free. Replace their usage with a call to memblock_free using the following semantic patch: @@ expression e1, e2, e3; @@ ( - free_bootmem(e1, e2) + memblock_free(e1, e2) | - free_bootmem_node(e1, e2, e3) + memblock_free(e2, e3) ) Link: http://lkml.kernel.org/r/1536927045-23536-24-git-send-email-rppt@linux.vnet.ibm.com Signed-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Chris Zankel <chris@zankel.net> Cc: "David S. Miller" <davem@davemloft.net> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greentime Hu <green.hu@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Ingo Molnar <mingo@redhat.com> Cc: "James E.J. Bottomley" <jejb@parisc-linux.org> Cc: Jonas Bonn <jonas@southpole.se> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Ley Foon Tan <lftan@altera.com> Cc: Mark Salter <msalter@redhat.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Matt Turner <mattst88@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Simek <monstr@monstr.eu> Cc: Palmer Dabbelt <palmer@sifive.com> Cc: Paul Burton <paul.burton@mips.com> Cc: Richard Kuo <rkuo@codeaurora.org> Cc: Richard Weinberger <richard@nod.at> Cc: Rich Felker <dalias@libc.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Serge Semin <fancer.lancer@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-10-31 06:09:21 +08:00
memblock_free(xdbc.table_dma, PAGE_SIZE);
memblock_free(xdbc.out_dma, PAGE_SIZE);
usb/early: Add driver for xhci debug capability XHCI debug capability (DbC) is an optional but standalone functionality provided by an xHCI host controller. Software learns this capability by walking through the extended capability list of the host. XHCI specification describes DbC in section 7.6. This patch introduces the code to probe and initialize the debug capability hardware during early boot. With hardware initialized, the debug target (system on which this code is running) will present a debug device through the debug port (normally the first USB3 port). The debug device is fully compliant with the USB framework and provides the equivalent of a very high performance (USB3) full-duplex serial link between the debug host and target. The DbC functionality is independent of the xHCI host. There isn't any precondition from the xHCI host side for the DbC to work. One use for this feature is kernel debugging, for example when your machine crashes very early before the regular console code is initialized. Other uses include simpler, lockless logging instead of a full-blown printk console driver and klogd. Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Acked-by: Thomas Gleixner <tglx@linutronix.de> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mathias Nyman <mathias.nyman@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: linux-usb@vger.kernel.org Link: http://lkml.kernel.org/r/1490083293-3792-3-git-send-email-baolu.lu@linux.intel.com [ Small fix to the Kconfig help text. ] Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-03-21 16:01:30 +08:00
writel(0, &xdbc.xdbc_reg->control);
early_iounmap(xdbc.xhci_base, xdbc.xhci_length);
return ret;
}
subsys_initcall(xdbc_init);