OpenCloudOS-Kernel/drivers/rtc/sysfs.c

354 lines
8.2 KiB
C
Raw Normal View History

// SPDX-License-Identifier: GPL-2.0
/*
* RTC subsystem, sysfs interface
*
* Copyright (C) 2005 Tower Technologies
* Author: Alessandro Zummo <a.zummo@towertech.it>
*/
#include <linux/module.h>
#include <linux/rtc.h>
#include "rtc-core.h"
/* device attributes */
/*
* NOTE: RTC times displayed in sysfs use the RTC's timezone. That's
* ideally UTC. However, PCs that also boot to MS-Windows normally use
* the local time and change to match daylight savings time. That affects
* attributes including date, time, since_epoch, and wakealarm.
*/
static ssize_t
name_show(struct device *dev, struct device_attribute *attr, char *buf)
{
return sprintf(buf, "%s %s\n", dev_driver_string(dev->parent),
dev_name(dev->parent));
}
static DEVICE_ATTR_RO(name);
static ssize_t
date_show(struct device *dev, struct device_attribute *attr, char *buf)
{
ssize_t retval;
struct rtc_time tm;
retval = rtc_read_time(to_rtc_device(dev), &tm);
if (retval)
return retval;
return sprintf(buf, "%ptRd\n", &tm);
}
static DEVICE_ATTR_RO(date);
static ssize_t
time_show(struct device *dev, struct device_attribute *attr, char *buf)
{
ssize_t retval;
struct rtc_time tm;
retval = rtc_read_time(to_rtc_device(dev), &tm);
if (retval)
return retval;
return sprintf(buf, "%ptRt\n", &tm);
}
static DEVICE_ATTR_RO(time);
static ssize_t
since_epoch_show(struct device *dev, struct device_attribute *attr, char *buf)
{
ssize_t retval;
struct rtc_time tm;
retval = rtc_read_time(to_rtc_device(dev), &tm);
if (retval == 0) {
time64_t time;
time = rtc_tm_to_time64(&tm);
retval = sprintf(buf, "%lld\n", time);
}
return retval;
}
static DEVICE_ATTR_RO(since_epoch);
static ssize_t
max_user_freq_show(struct device *dev, struct device_attribute *attr, char *buf)
{
return sprintf(buf, "%d\n", to_rtc_device(dev)->max_user_freq);
}
static ssize_t
max_user_freq_store(struct device *dev, struct device_attribute *attr,
const char *buf, size_t n)
{
struct rtc_device *rtc = to_rtc_device(dev);
unsigned long val;
int err;
err = kstrtoul(buf, 0, &val);
if (err)
return err;
if (val >= 4096 || val == 0)
return -EINVAL;
rtc->max_user_freq = (int)val;
return n;
}
static DEVICE_ATTR_RW(max_user_freq);
/**
* rtc_sysfs_show_hctosys - indicate if the given RTC set the system time
*
* Returns 1 if the system clock was set by this RTC at the last
* boot or resume event.
*/
static ssize_t
hctosys_show(struct device *dev, struct device_attribute *attr, char *buf)
{
#ifdef CONFIG_RTC_HCTOSYS_DEVICE
if (rtc_hctosys_ret == 0 &&
strcmp(dev_name(&to_rtc_device(dev)->dev),
CONFIG_RTC_HCTOSYS_DEVICE) == 0)
return sprintf(buf, "1\n");
#endif
return sprintf(buf, "0\n");
}
static DEVICE_ATTR_RO(hctosys);
[PATCH] RTC gets sysfs wakealarm attribute This adds a new "wakealarm" sysfs attribute to RTC class devices which support alarm operations and are wakeup-capable: - It reads as either empty, or the scheduled alarm time as seconds since the POSIX epoch. (That time may already have passed, since nothing currently enforces one-shot alarm semantics.) - It can be written with an alarm time in the future, again seconds since the POSIX epoch, which enables the alarm. - It can be written with an alarm time not in the future (such as 0, the start of the POSIX epoch) to disable the alarm. Usage examples (some need GNU date) after "cd /sys/class/rtc/rtcN": alarm after 10 minutes: # echo $(( $(cat since_epoch) + 10 * 60 )) > wakealarm alarm tuesday evening 10pm: # date -d '10pm tuesday' "+%s" > wakealarm disable alarm: # echo 0 > wakealarm This resembles the /proc/acpi/alarm file in that nothing happens when the alarm triggers ... except possibly waking the system from sleep. It's also like that in a nasty way: not much can be done to prevent one task from clobbering another task's alarm settings. It differs from that file in that there's no in-kernel date parser. Note that a few RTCs ignore rtc_wkalrm.enabled when setting alarms, or aren't set up correctly, so they won't yet behave with this attribute. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Acked-by: Pavel Machek <pavel@ucw.cz> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-12 16:52:47 +08:00
static ssize_t
wakealarm_show(struct device *dev, struct device_attribute *attr, char *buf)
[PATCH] RTC gets sysfs wakealarm attribute This adds a new "wakealarm" sysfs attribute to RTC class devices which support alarm operations and are wakeup-capable: - It reads as either empty, or the scheduled alarm time as seconds since the POSIX epoch. (That time may already have passed, since nothing currently enforces one-shot alarm semantics.) - It can be written with an alarm time in the future, again seconds since the POSIX epoch, which enables the alarm. - It can be written with an alarm time not in the future (such as 0, the start of the POSIX epoch) to disable the alarm. Usage examples (some need GNU date) after "cd /sys/class/rtc/rtcN": alarm after 10 minutes: # echo $(( $(cat since_epoch) + 10 * 60 )) > wakealarm alarm tuesday evening 10pm: # date -d '10pm tuesday' "+%s" > wakealarm disable alarm: # echo 0 > wakealarm This resembles the /proc/acpi/alarm file in that nothing happens when the alarm triggers ... except possibly waking the system from sleep. It's also like that in a nasty way: not much can be done to prevent one task from clobbering another task's alarm settings. It differs from that file in that there's no in-kernel date parser. Note that a few RTCs ignore rtc_wkalrm.enabled when setting alarms, or aren't set up correctly, so they won't yet behave with this attribute. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Acked-by: Pavel Machek <pavel@ucw.cz> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-12 16:52:47 +08:00
{
ssize_t retval;
time64_t alarm;
[PATCH] RTC gets sysfs wakealarm attribute This adds a new "wakealarm" sysfs attribute to RTC class devices which support alarm operations and are wakeup-capable: - It reads as either empty, or the scheduled alarm time as seconds since the POSIX epoch. (That time may already have passed, since nothing currently enforces one-shot alarm semantics.) - It can be written with an alarm time in the future, again seconds since the POSIX epoch, which enables the alarm. - It can be written with an alarm time not in the future (such as 0, the start of the POSIX epoch) to disable the alarm. Usage examples (some need GNU date) after "cd /sys/class/rtc/rtcN": alarm after 10 minutes: # echo $(( $(cat since_epoch) + 10 * 60 )) > wakealarm alarm tuesday evening 10pm: # date -d '10pm tuesday' "+%s" > wakealarm disable alarm: # echo 0 > wakealarm This resembles the /proc/acpi/alarm file in that nothing happens when the alarm triggers ... except possibly waking the system from sleep. It's also like that in a nasty way: not much can be done to prevent one task from clobbering another task's alarm settings. It differs from that file in that there's no in-kernel date parser. Note that a few RTCs ignore rtc_wkalrm.enabled when setting alarms, or aren't set up correctly, so they won't yet behave with this attribute. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Acked-by: Pavel Machek <pavel@ucw.cz> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-12 16:52:47 +08:00
struct rtc_wkalrm alm;
/* Don't show disabled alarms. For uniformity, RTC alarms are
* conceptually one-shot, even though some common RTCs (on PCs)
* don't actually work that way.
[PATCH] RTC gets sysfs wakealarm attribute This adds a new "wakealarm" sysfs attribute to RTC class devices which support alarm operations and are wakeup-capable: - It reads as either empty, or the scheduled alarm time as seconds since the POSIX epoch. (That time may already have passed, since nothing currently enforces one-shot alarm semantics.) - It can be written with an alarm time in the future, again seconds since the POSIX epoch, which enables the alarm. - It can be written with an alarm time not in the future (such as 0, the start of the POSIX epoch) to disable the alarm. Usage examples (some need GNU date) after "cd /sys/class/rtc/rtcN": alarm after 10 minutes: # echo $(( $(cat since_epoch) + 10 * 60 )) > wakealarm alarm tuesday evening 10pm: # date -d '10pm tuesday' "+%s" > wakealarm disable alarm: # echo 0 > wakealarm This resembles the /proc/acpi/alarm file in that nothing happens when the alarm triggers ... except possibly waking the system from sleep. It's also like that in a nasty way: not much can be done to prevent one task from clobbering another task's alarm settings. It differs from that file in that there's no in-kernel date parser. Note that a few RTCs ignore rtc_wkalrm.enabled when setting alarms, or aren't set up correctly, so they won't yet behave with this attribute. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Acked-by: Pavel Machek <pavel@ucw.cz> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-12 16:52:47 +08:00
*
* NOTE: RTC implementations where the alarm doesn't match an
* exact YYYY-MM-DD HH:MM[:SS] date *must* disable their RTC
* alarms after they trigger, to ensure one-shot semantics.
[PATCH] RTC gets sysfs wakealarm attribute This adds a new "wakealarm" sysfs attribute to RTC class devices which support alarm operations and are wakeup-capable: - It reads as either empty, or the scheduled alarm time as seconds since the POSIX epoch. (That time may already have passed, since nothing currently enforces one-shot alarm semantics.) - It can be written with an alarm time in the future, again seconds since the POSIX epoch, which enables the alarm. - It can be written with an alarm time not in the future (such as 0, the start of the POSIX epoch) to disable the alarm. Usage examples (some need GNU date) after "cd /sys/class/rtc/rtcN": alarm after 10 minutes: # echo $(( $(cat since_epoch) + 10 * 60 )) > wakealarm alarm tuesday evening 10pm: # date -d '10pm tuesday' "+%s" > wakealarm disable alarm: # echo 0 > wakealarm This resembles the /proc/acpi/alarm file in that nothing happens when the alarm triggers ... except possibly waking the system from sleep. It's also like that in a nasty way: not much can be done to prevent one task from clobbering another task's alarm settings. It differs from that file in that there's no in-kernel date parser. Note that a few RTCs ignore rtc_wkalrm.enabled when setting alarms, or aren't set up correctly, so they won't yet behave with this attribute. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Acked-by: Pavel Machek <pavel@ucw.cz> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-12 16:52:47 +08:00
*/
retval = rtc_read_alarm(to_rtc_device(dev), &alm);
[PATCH] RTC gets sysfs wakealarm attribute This adds a new "wakealarm" sysfs attribute to RTC class devices which support alarm operations and are wakeup-capable: - It reads as either empty, or the scheduled alarm time as seconds since the POSIX epoch. (That time may already have passed, since nothing currently enforces one-shot alarm semantics.) - It can be written with an alarm time in the future, again seconds since the POSIX epoch, which enables the alarm. - It can be written with an alarm time not in the future (such as 0, the start of the POSIX epoch) to disable the alarm. Usage examples (some need GNU date) after "cd /sys/class/rtc/rtcN": alarm after 10 minutes: # echo $(( $(cat since_epoch) + 10 * 60 )) > wakealarm alarm tuesday evening 10pm: # date -d '10pm tuesday' "+%s" > wakealarm disable alarm: # echo 0 > wakealarm This resembles the /proc/acpi/alarm file in that nothing happens when the alarm triggers ... except possibly waking the system from sleep. It's also like that in a nasty way: not much can be done to prevent one task from clobbering another task's alarm settings. It differs from that file in that there's no in-kernel date parser. Note that a few RTCs ignore rtc_wkalrm.enabled when setting alarms, or aren't set up correctly, so they won't yet behave with this attribute. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Acked-by: Pavel Machek <pavel@ucw.cz> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-12 16:52:47 +08:00
if (retval == 0 && alm.enabled) {
alarm = rtc_tm_to_time64(&alm.time);
retval = sprintf(buf, "%lld\n", alarm);
[PATCH] RTC gets sysfs wakealarm attribute This adds a new "wakealarm" sysfs attribute to RTC class devices which support alarm operations and are wakeup-capable: - It reads as either empty, or the scheduled alarm time as seconds since the POSIX epoch. (That time may already have passed, since nothing currently enforces one-shot alarm semantics.) - It can be written with an alarm time in the future, again seconds since the POSIX epoch, which enables the alarm. - It can be written with an alarm time not in the future (such as 0, the start of the POSIX epoch) to disable the alarm. Usage examples (some need GNU date) after "cd /sys/class/rtc/rtcN": alarm after 10 minutes: # echo $(( $(cat since_epoch) + 10 * 60 )) > wakealarm alarm tuesday evening 10pm: # date -d '10pm tuesday' "+%s" > wakealarm disable alarm: # echo 0 > wakealarm This resembles the /proc/acpi/alarm file in that nothing happens when the alarm triggers ... except possibly waking the system from sleep. It's also like that in a nasty way: not much can be done to prevent one task from clobbering another task's alarm settings. It differs from that file in that there's no in-kernel date parser. Note that a few RTCs ignore rtc_wkalrm.enabled when setting alarms, or aren't set up correctly, so they won't yet behave with this attribute. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Acked-by: Pavel Machek <pavel@ucw.cz> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-12 16:52:47 +08:00
}
return retval;
}
static ssize_t
wakealarm_store(struct device *dev, struct device_attribute *attr,
const char *buf, size_t n)
[PATCH] RTC gets sysfs wakealarm attribute This adds a new "wakealarm" sysfs attribute to RTC class devices which support alarm operations and are wakeup-capable: - It reads as either empty, or the scheduled alarm time as seconds since the POSIX epoch. (That time may already have passed, since nothing currently enforces one-shot alarm semantics.) - It can be written with an alarm time in the future, again seconds since the POSIX epoch, which enables the alarm. - It can be written with an alarm time not in the future (such as 0, the start of the POSIX epoch) to disable the alarm. Usage examples (some need GNU date) after "cd /sys/class/rtc/rtcN": alarm after 10 minutes: # echo $(( $(cat since_epoch) + 10 * 60 )) > wakealarm alarm tuesday evening 10pm: # date -d '10pm tuesday' "+%s" > wakealarm disable alarm: # echo 0 > wakealarm This resembles the /proc/acpi/alarm file in that nothing happens when the alarm triggers ... except possibly waking the system from sleep. It's also like that in a nasty way: not much can be done to prevent one task from clobbering another task's alarm settings. It differs from that file in that there's no in-kernel date parser. Note that a few RTCs ignore rtc_wkalrm.enabled when setting alarms, or aren't set up correctly, so they won't yet behave with this attribute. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Acked-by: Pavel Machek <pavel@ucw.cz> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-12 16:52:47 +08:00
{
ssize_t retval;
time64_t now, alarm;
time64_t push = 0;
[PATCH] RTC gets sysfs wakealarm attribute This adds a new "wakealarm" sysfs attribute to RTC class devices which support alarm operations and are wakeup-capable: - It reads as either empty, or the scheduled alarm time as seconds since the POSIX epoch. (That time may already have passed, since nothing currently enforces one-shot alarm semantics.) - It can be written with an alarm time in the future, again seconds since the POSIX epoch, which enables the alarm. - It can be written with an alarm time not in the future (such as 0, the start of the POSIX epoch) to disable the alarm. Usage examples (some need GNU date) after "cd /sys/class/rtc/rtcN": alarm after 10 minutes: # echo $(( $(cat since_epoch) + 10 * 60 )) > wakealarm alarm tuesday evening 10pm: # date -d '10pm tuesday' "+%s" > wakealarm disable alarm: # echo 0 > wakealarm This resembles the /proc/acpi/alarm file in that nothing happens when the alarm triggers ... except possibly waking the system from sleep. It's also like that in a nasty way: not much can be done to prevent one task from clobbering another task's alarm settings. It differs from that file in that there's no in-kernel date parser. Note that a few RTCs ignore rtc_wkalrm.enabled when setting alarms, or aren't set up correctly, so they won't yet behave with this attribute. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Acked-by: Pavel Machek <pavel@ucw.cz> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-12 16:52:47 +08:00
struct rtc_wkalrm alm;
struct rtc_device *rtc = to_rtc_device(dev);
const char *buf_ptr;
int adjust = 0;
[PATCH] RTC gets sysfs wakealarm attribute This adds a new "wakealarm" sysfs attribute to RTC class devices which support alarm operations and are wakeup-capable: - It reads as either empty, or the scheduled alarm time as seconds since the POSIX epoch. (That time may already have passed, since nothing currently enforces one-shot alarm semantics.) - It can be written with an alarm time in the future, again seconds since the POSIX epoch, which enables the alarm. - It can be written with an alarm time not in the future (such as 0, the start of the POSIX epoch) to disable the alarm. Usage examples (some need GNU date) after "cd /sys/class/rtc/rtcN": alarm after 10 minutes: # echo $(( $(cat since_epoch) + 10 * 60 )) > wakealarm alarm tuesday evening 10pm: # date -d '10pm tuesday' "+%s" > wakealarm disable alarm: # echo 0 > wakealarm This resembles the /proc/acpi/alarm file in that nothing happens when the alarm triggers ... except possibly waking the system from sleep. It's also like that in a nasty way: not much can be done to prevent one task from clobbering another task's alarm settings. It differs from that file in that there's no in-kernel date parser. Note that a few RTCs ignore rtc_wkalrm.enabled when setting alarms, or aren't set up correctly, so they won't yet behave with this attribute. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Acked-by: Pavel Machek <pavel@ucw.cz> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-12 16:52:47 +08:00
/* Only request alarms that trigger in the future. Disable them
* by writing another time, e.g. 0 meaning Jan 1 1970 UTC.
*/
retval = rtc_read_time(rtc, &alm.time);
[PATCH] RTC gets sysfs wakealarm attribute This adds a new "wakealarm" sysfs attribute to RTC class devices which support alarm operations and are wakeup-capable: - It reads as either empty, or the scheduled alarm time as seconds since the POSIX epoch. (That time may already have passed, since nothing currently enforces one-shot alarm semantics.) - It can be written with an alarm time in the future, again seconds since the POSIX epoch, which enables the alarm. - It can be written with an alarm time not in the future (such as 0, the start of the POSIX epoch) to disable the alarm. Usage examples (some need GNU date) after "cd /sys/class/rtc/rtcN": alarm after 10 minutes: # echo $(( $(cat since_epoch) + 10 * 60 )) > wakealarm alarm tuesday evening 10pm: # date -d '10pm tuesday' "+%s" > wakealarm disable alarm: # echo 0 > wakealarm This resembles the /proc/acpi/alarm file in that nothing happens when the alarm triggers ... except possibly waking the system from sleep. It's also like that in a nasty way: not much can be done to prevent one task from clobbering another task's alarm settings. It differs from that file in that there's no in-kernel date parser. Note that a few RTCs ignore rtc_wkalrm.enabled when setting alarms, or aren't set up correctly, so they won't yet behave with this attribute. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Acked-by: Pavel Machek <pavel@ucw.cz> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-12 16:52:47 +08:00
if (retval < 0)
return retval;
now = rtc_tm_to_time64(&alm.time);
[PATCH] RTC gets sysfs wakealarm attribute This adds a new "wakealarm" sysfs attribute to RTC class devices which support alarm operations and are wakeup-capable: - It reads as either empty, or the scheduled alarm time as seconds since the POSIX epoch. (That time may already have passed, since nothing currently enforces one-shot alarm semantics.) - It can be written with an alarm time in the future, again seconds since the POSIX epoch, which enables the alarm. - It can be written with an alarm time not in the future (such as 0, the start of the POSIX epoch) to disable the alarm. Usage examples (some need GNU date) after "cd /sys/class/rtc/rtcN": alarm after 10 minutes: # echo $(( $(cat since_epoch) + 10 * 60 )) > wakealarm alarm tuesday evening 10pm: # date -d '10pm tuesday' "+%s" > wakealarm disable alarm: # echo 0 > wakealarm This resembles the /proc/acpi/alarm file in that nothing happens when the alarm triggers ... except possibly waking the system from sleep. It's also like that in a nasty way: not much can be done to prevent one task from clobbering another task's alarm settings. It differs from that file in that there's no in-kernel date parser. Note that a few RTCs ignore rtc_wkalrm.enabled when setting alarms, or aren't set up correctly, so they won't yet behave with this attribute. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Acked-by: Pavel Machek <pavel@ucw.cz> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-12 16:52:47 +08:00
buf_ptr = buf;
if (*buf_ptr == '+') {
buf_ptr++;
if (*buf_ptr == '=') {
buf_ptr++;
push = 1;
} else {
adjust = 1;
}
}
retval = kstrtos64(buf_ptr, 0, &alarm);
if (retval)
return retval;
if (adjust)
alarm += now;
if (alarm > now || push) {
[PATCH] RTC gets sysfs wakealarm attribute This adds a new "wakealarm" sysfs attribute to RTC class devices which support alarm operations and are wakeup-capable: - It reads as either empty, or the scheduled alarm time as seconds since the POSIX epoch. (That time may already have passed, since nothing currently enforces one-shot alarm semantics.) - It can be written with an alarm time in the future, again seconds since the POSIX epoch, which enables the alarm. - It can be written with an alarm time not in the future (such as 0, the start of the POSIX epoch) to disable the alarm. Usage examples (some need GNU date) after "cd /sys/class/rtc/rtcN": alarm after 10 minutes: # echo $(( $(cat since_epoch) + 10 * 60 )) > wakealarm alarm tuesday evening 10pm: # date -d '10pm tuesday' "+%s" > wakealarm disable alarm: # echo 0 > wakealarm This resembles the /proc/acpi/alarm file in that nothing happens when the alarm triggers ... except possibly waking the system from sleep. It's also like that in a nasty way: not much can be done to prevent one task from clobbering another task's alarm settings. It differs from that file in that there's no in-kernel date parser. Note that a few RTCs ignore rtc_wkalrm.enabled when setting alarms, or aren't set up correctly, so they won't yet behave with this attribute. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Acked-by: Pavel Machek <pavel@ucw.cz> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-12 16:52:47 +08:00
/* Avoid accidentally clobbering active alarms; we can't
* entirely prevent that here, without even the minimal
* locking from the /dev/rtcN api.
*/
retval = rtc_read_alarm(rtc, &alm);
[PATCH] RTC gets sysfs wakealarm attribute This adds a new "wakealarm" sysfs attribute to RTC class devices which support alarm operations and are wakeup-capable: - It reads as either empty, or the scheduled alarm time as seconds since the POSIX epoch. (That time may already have passed, since nothing currently enforces one-shot alarm semantics.) - It can be written with an alarm time in the future, again seconds since the POSIX epoch, which enables the alarm. - It can be written with an alarm time not in the future (such as 0, the start of the POSIX epoch) to disable the alarm. Usage examples (some need GNU date) after "cd /sys/class/rtc/rtcN": alarm after 10 minutes: # echo $(( $(cat since_epoch) + 10 * 60 )) > wakealarm alarm tuesday evening 10pm: # date -d '10pm tuesday' "+%s" > wakealarm disable alarm: # echo 0 > wakealarm This resembles the /proc/acpi/alarm file in that nothing happens when the alarm triggers ... except possibly waking the system from sleep. It's also like that in a nasty way: not much can be done to prevent one task from clobbering another task's alarm settings. It differs from that file in that there's no in-kernel date parser. Note that a few RTCs ignore rtc_wkalrm.enabled when setting alarms, or aren't set up correctly, so they won't yet behave with this attribute. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Acked-by: Pavel Machek <pavel@ucw.cz> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-12 16:52:47 +08:00
if (retval < 0)
return retval;
if (alm.enabled) {
if (push) {
push = rtc_tm_to_time64(&alm.time);
alarm += push;
} else
return -EBUSY;
} else if (push)
return -EINVAL;
[PATCH] RTC gets sysfs wakealarm attribute This adds a new "wakealarm" sysfs attribute to RTC class devices which support alarm operations and are wakeup-capable: - It reads as either empty, or the scheduled alarm time as seconds since the POSIX epoch. (That time may already have passed, since nothing currently enforces one-shot alarm semantics.) - It can be written with an alarm time in the future, again seconds since the POSIX epoch, which enables the alarm. - It can be written with an alarm time not in the future (such as 0, the start of the POSIX epoch) to disable the alarm. Usage examples (some need GNU date) after "cd /sys/class/rtc/rtcN": alarm after 10 minutes: # echo $(( $(cat since_epoch) + 10 * 60 )) > wakealarm alarm tuesday evening 10pm: # date -d '10pm tuesday' "+%s" > wakealarm disable alarm: # echo 0 > wakealarm This resembles the /proc/acpi/alarm file in that nothing happens when the alarm triggers ... except possibly waking the system from sleep. It's also like that in a nasty way: not much can be done to prevent one task from clobbering another task's alarm settings. It differs from that file in that there's no in-kernel date parser. Note that a few RTCs ignore rtc_wkalrm.enabled when setting alarms, or aren't set up correctly, so they won't yet behave with this attribute. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Acked-by: Pavel Machek <pavel@ucw.cz> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-12 16:52:47 +08:00
alm.enabled = 1;
} else {
alm.enabled = 0;
/* Provide a valid future alarm time. Linux isn't EFI,
* this time won't be ignored when disabling the alarm.
*/
alarm = now + 300;
}
rtc_time64_to_tm(alarm, &alm.time);
[PATCH] RTC gets sysfs wakealarm attribute This adds a new "wakealarm" sysfs attribute to RTC class devices which support alarm operations and are wakeup-capable: - It reads as either empty, or the scheduled alarm time as seconds since the POSIX epoch. (That time may already have passed, since nothing currently enforces one-shot alarm semantics.) - It can be written with an alarm time in the future, again seconds since the POSIX epoch, which enables the alarm. - It can be written with an alarm time not in the future (such as 0, the start of the POSIX epoch) to disable the alarm. Usage examples (some need GNU date) after "cd /sys/class/rtc/rtcN": alarm after 10 minutes: # echo $(( $(cat since_epoch) + 10 * 60 )) > wakealarm alarm tuesday evening 10pm: # date -d '10pm tuesday' "+%s" > wakealarm disable alarm: # echo 0 > wakealarm This resembles the /proc/acpi/alarm file in that nothing happens when the alarm triggers ... except possibly waking the system from sleep. It's also like that in a nasty way: not much can be done to prevent one task from clobbering another task's alarm settings. It differs from that file in that there's no in-kernel date parser. Note that a few RTCs ignore rtc_wkalrm.enabled when setting alarms, or aren't set up correctly, so they won't yet behave with this attribute. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Acked-by: Pavel Machek <pavel@ucw.cz> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-12 16:52:47 +08:00
retval = rtc_set_alarm(rtc, &alm);
[PATCH] RTC gets sysfs wakealarm attribute This adds a new "wakealarm" sysfs attribute to RTC class devices which support alarm operations and are wakeup-capable: - It reads as either empty, or the scheduled alarm time as seconds since the POSIX epoch. (That time may already have passed, since nothing currently enforces one-shot alarm semantics.) - It can be written with an alarm time in the future, again seconds since the POSIX epoch, which enables the alarm. - It can be written with an alarm time not in the future (such as 0, the start of the POSIX epoch) to disable the alarm. Usage examples (some need GNU date) after "cd /sys/class/rtc/rtcN": alarm after 10 minutes: # echo $(( $(cat since_epoch) + 10 * 60 )) > wakealarm alarm tuesday evening 10pm: # date -d '10pm tuesday' "+%s" > wakealarm disable alarm: # echo 0 > wakealarm This resembles the /proc/acpi/alarm file in that nothing happens when the alarm triggers ... except possibly waking the system from sleep. It's also like that in a nasty way: not much can be done to prevent one task from clobbering another task's alarm settings. It differs from that file in that there's no in-kernel date parser. Note that a few RTCs ignore rtc_wkalrm.enabled when setting alarms, or aren't set up correctly, so they won't yet behave with this attribute. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Acked-by: Pavel Machek <pavel@ucw.cz> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-12 16:52:47 +08:00
return (retval < 0) ? retval : n;
}
static DEVICE_ATTR_RW(wakealarm);
[PATCH] RTC gets sysfs wakealarm attribute This adds a new "wakealarm" sysfs attribute to RTC class devices which support alarm operations and are wakeup-capable: - It reads as either empty, or the scheduled alarm time as seconds since the POSIX epoch. (That time may already have passed, since nothing currently enforces one-shot alarm semantics.) - It can be written with an alarm time in the future, again seconds since the POSIX epoch, which enables the alarm. - It can be written with an alarm time not in the future (such as 0, the start of the POSIX epoch) to disable the alarm. Usage examples (some need GNU date) after "cd /sys/class/rtc/rtcN": alarm after 10 minutes: # echo $(( $(cat since_epoch) + 10 * 60 )) > wakealarm alarm tuesday evening 10pm: # date -d '10pm tuesday' "+%s" > wakealarm disable alarm: # echo 0 > wakealarm This resembles the /proc/acpi/alarm file in that nothing happens when the alarm triggers ... except possibly waking the system from sleep. It's also like that in a nasty way: not much can be done to prevent one task from clobbering another task's alarm settings. It differs from that file in that there's no in-kernel date parser. Note that a few RTCs ignore rtc_wkalrm.enabled when setting alarms, or aren't set up correctly, so they won't yet behave with this attribute. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Acked-by: Pavel Machek <pavel@ucw.cz> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-12 16:52:47 +08:00
static ssize_t
offset_show(struct device *dev, struct device_attribute *attr, char *buf)
{
ssize_t retval;
long offset;
retval = rtc_read_offset(to_rtc_device(dev), &offset);
if (retval == 0)
retval = sprintf(buf, "%ld\n", offset);
return retval;
}
static ssize_t
offset_store(struct device *dev, struct device_attribute *attr,
const char *buf, size_t n)
{
ssize_t retval;
long offset;
retval = kstrtol(buf, 10, &offset);
if (retval == 0)
retval = rtc_set_offset(to_rtc_device(dev), offset);
return (retval < 0) ? retval : n;
}
static DEVICE_ATTR_RW(offset);
static ssize_t
range_show(struct device *dev, struct device_attribute *attr, char *buf)
{
return sprintf(buf, "[%lld,%llu]\n", to_rtc_device(dev)->range_min,
to_rtc_device(dev)->range_max);
}
static DEVICE_ATTR_RO(range);
static struct attribute *rtc_attrs[] = {
&dev_attr_name.attr,
&dev_attr_date.attr,
&dev_attr_time.attr,
&dev_attr_since_epoch.attr,
&dev_attr_max_user_freq.attr,
&dev_attr_hctosys.attr,
&dev_attr_wakealarm.attr,
&dev_attr_offset.attr,
&dev_attr_range.attr,
NULL,
};
[PATCH] RTC gets sysfs wakealarm attribute This adds a new "wakealarm" sysfs attribute to RTC class devices which support alarm operations and are wakeup-capable: - It reads as either empty, or the scheduled alarm time as seconds since the POSIX epoch. (That time may already have passed, since nothing currently enforces one-shot alarm semantics.) - It can be written with an alarm time in the future, again seconds since the POSIX epoch, which enables the alarm. - It can be written with an alarm time not in the future (such as 0, the start of the POSIX epoch) to disable the alarm. Usage examples (some need GNU date) after "cd /sys/class/rtc/rtcN": alarm after 10 minutes: # echo $(( $(cat since_epoch) + 10 * 60 )) > wakealarm alarm tuesday evening 10pm: # date -d '10pm tuesday' "+%s" > wakealarm disable alarm: # echo 0 > wakealarm This resembles the /proc/acpi/alarm file in that nothing happens when the alarm triggers ... except possibly waking the system from sleep. It's also like that in a nasty way: not much can be done to prevent one task from clobbering another task's alarm settings. It differs from that file in that there's no in-kernel date parser. Note that a few RTCs ignore rtc_wkalrm.enabled when setting alarms, or aren't set up correctly, so they won't yet behave with this attribute. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Acked-by: Pavel Machek <pavel@ucw.cz> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-12 16:52:47 +08:00
/* The reason to trigger an alarm with no process watching it (via sysfs)
* is its side effect: waking from a system state like suspend-to-RAM or
* suspend-to-disk. So: no attribute unless that side effect is possible.
* (Userspace may disable that mechanism later.)
*/
static bool rtc_does_wakealarm(struct rtc_device *rtc)
[PATCH] RTC gets sysfs wakealarm attribute This adds a new "wakealarm" sysfs attribute to RTC class devices which support alarm operations and are wakeup-capable: - It reads as either empty, or the scheduled alarm time as seconds since the POSIX epoch. (That time may already have passed, since nothing currently enforces one-shot alarm semantics.) - It can be written with an alarm time in the future, again seconds since the POSIX epoch, which enables the alarm. - It can be written with an alarm time not in the future (such as 0, the start of the POSIX epoch) to disable the alarm. Usage examples (some need GNU date) after "cd /sys/class/rtc/rtcN": alarm after 10 minutes: # echo $(( $(cat since_epoch) + 10 * 60 )) > wakealarm alarm tuesday evening 10pm: # date -d '10pm tuesday' "+%s" > wakealarm disable alarm: # echo 0 > wakealarm This resembles the /proc/acpi/alarm file in that nothing happens when the alarm triggers ... except possibly waking the system from sleep. It's also like that in a nasty way: not much can be done to prevent one task from clobbering another task's alarm settings. It differs from that file in that there's no in-kernel date parser. Note that a few RTCs ignore rtc_wkalrm.enabled when setting alarms, or aren't set up correctly, so they won't yet behave with this attribute. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Acked-by: Pavel Machek <pavel@ucw.cz> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-12 16:52:47 +08:00
{
if (!device_can_wakeup(rtc->dev.parent))
return false;
[PATCH] RTC gets sysfs wakealarm attribute This adds a new "wakealarm" sysfs attribute to RTC class devices which support alarm operations and are wakeup-capable: - It reads as either empty, or the scheduled alarm time as seconds since the POSIX epoch. (That time may already have passed, since nothing currently enforces one-shot alarm semantics.) - It can be written with an alarm time in the future, again seconds since the POSIX epoch, which enables the alarm. - It can be written with an alarm time not in the future (such as 0, the start of the POSIX epoch) to disable the alarm. Usage examples (some need GNU date) after "cd /sys/class/rtc/rtcN": alarm after 10 minutes: # echo $(( $(cat since_epoch) + 10 * 60 )) > wakealarm alarm tuesday evening 10pm: # date -d '10pm tuesday' "+%s" > wakealarm disable alarm: # echo 0 > wakealarm This resembles the /proc/acpi/alarm file in that nothing happens when the alarm triggers ... except possibly waking the system from sleep. It's also like that in a nasty way: not much can be done to prevent one task from clobbering another task's alarm settings. It differs from that file in that there's no in-kernel date parser. Note that a few RTCs ignore rtc_wkalrm.enabled when setting alarms, or aren't set up correctly, so they won't yet behave with this attribute. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Acked-by: Pavel Machek <pavel@ucw.cz> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-12 16:52:47 +08:00
return rtc->ops->set_alarm != NULL;
}
static umode_t rtc_attr_is_visible(struct kobject *kobj,
struct attribute *attr, int n)
{
struct device *dev = container_of(kobj, struct device, kobj);
struct rtc_device *rtc = to_rtc_device(dev);
umode_t mode = attr->mode;
if (attr == &dev_attr_wakealarm.attr) {
if (!rtc_does_wakealarm(rtc))
mode = 0;
} else if (attr == &dev_attr_offset.attr) {
if (!rtc->ops->set_offset)
mode = 0;
} else if (attr == &dev_attr_range.attr) {
if (!(rtc->range_max - rtc->range_min))
mode = 0;
}
return mode;
}
static struct attribute_group rtc_attr_group = {
.is_visible = rtc_attr_is_visible,
.attrs = rtc_attrs,
};
static const struct attribute_group *rtc_attr_groups[] = {
&rtc_attr_group,
NULL
};
const struct attribute_group **rtc_get_dev_attribute_groups(void)
{
return rtc_attr_groups;
}
int rtc_add_groups(struct rtc_device *rtc, const struct attribute_group **grps)
{
size_t old_cnt = 0, add_cnt = 0, new_cnt;
const struct attribute_group **groups, **old;
if (rtc->registered)
return -EINVAL;
if (!grps)
return -EINVAL;
groups = rtc->dev.groups;
if (groups)
for (; *groups; groups++)
old_cnt++;
for (groups = grps; *groups; groups++)
add_cnt++;
new_cnt = old_cnt + add_cnt + 1;
groups = devm_kcalloc(&rtc->dev, new_cnt, sizeof(*groups), GFP_KERNEL);
if (!groups)
return -ENOMEM;
memcpy(groups, rtc->dev.groups, old_cnt * sizeof(*groups));
memcpy(groups + old_cnt, grps, add_cnt * sizeof(*groups));
groups[old_cnt + add_cnt] = NULL;
old = rtc->dev.groups;
rtc->dev.groups = groups;
if (old && old != rtc_attr_groups)
devm_kfree(&rtc->dev, old);
return 0;
}
EXPORT_SYMBOL(rtc_add_groups);
int rtc_add_group(struct rtc_device *rtc, const struct attribute_group *grp)
{
const struct attribute_group *groups[] = { grp, NULL };
return rtc_add_groups(rtc, groups);
}
EXPORT_SYMBOL(rtc_add_group);