UbiquitousOS
/
OpenCloudOS-Kernel
mirror of https://gitee.com/OpenCloudOS/OpenCloudOS-Kernel.git
11
0
Fork 0
Code Issues Projects Releases Wiki Activity
OpenCloudOS-Kernel/drivers/i2c/chips/Kconfig

485 lines
14 KiB
Plaintext
Raw Normal View History

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#
# I2C Sensor device configuration
#
menu "Hardware Sensors Chip support"
depends on I2C
config I2C_SENSOR
tristate
default n
config SENSORS_ADM1021
tristate "Analog Devices ADM1021 and compatibles"
depends on I2C && EXPERIMENTAL
select I2C_SENSOR
help
If you say yes here you get support for Analog Devices ADM1021
and ADM1023 sensor chips and clones: Maxim MAX1617 and MAX1617A,
Genesys Logic GL523SM, National Semiconductor LM84, TI THMC10,
and the XEON processor built-in sensor.
This driver can also be built as a module. If so, the module
will be called adm1021.
config SENSORS_ADM1025
tristate "Analog Devices ADM1025 and compatibles"
depends on I2C && EXPERIMENTAL
select I2C_SENSOR
help
If you say yes here you get support for Analog Devices ADM1025
and Philips NE1619 sensor chips.
[PATCH] I2C: chips/Kconfig corrections Here are some corrections for drivers/i2c/chips/Kconfig. Signed-off-by: Alexey Fisher <fishor@gmx.net> Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-05-18 00:09:36 +08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
This driver can also be built as a module. If so, the module
will be called adm1025.
config SENSORS_ADM1026
tristate "Analog Devices ADM1026 and compatibles"
depends on I2C && EXPERIMENTAL
select I2C_SENSOR
help
If you say yes here you get support for Analog Devices ADM1026
[PATCH] I2C: chips/Kconfig corrections Here are some corrections for drivers/i2c/chips/Kconfig. Signed-off-by: Alexey Fisher <fishor@gmx.net> Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-05-18 00:09:36 +08:00
sensor chip.
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
This driver can also be built as a module. If so, the module
will be called adm1026.
config SENSORS_ADM1031
tristate "Analog Devices ADM1031 and compatibles"
depends on I2C && EXPERIMENTAL
select I2C_SENSOR
help
If you say yes here you get support for Analog Devices ADM1031
and ADM1030 sensor chips.
[PATCH] I2C: chips/Kconfig corrections Here are some corrections for drivers/i2c/chips/Kconfig. Signed-off-by: Alexey Fisher <fishor@gmx.net> Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-05-18 00:09:36 +08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
This driver can also be built as a module. If so, the module
will be called adm1031.
[PATCH] I2C: add new hardware monitor driver: adm9240 Completion of Michiel Rook's port of adm9240 to 2.6 with addition of auto fan clock divider based on Jean Delvare's algorithm, and replaces scaling macros with static inlines. Signed-off-by: Grant Coady <gcoady@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-04-30 19:41:29 +08:00
config SENSORS_ADM9240
tristate "Analog Devices ADM9240 and compatibles"
depends on I2C && EXPERIMENTAL
select I2C_SENSOR
help
If you say yes here you get support for Analog Devices ADM9240,
Dallas DS1780, National Semiconductor LM81 sensor chips.
This driver can also be built as a module. If so, the module
will be called adm9240.
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
config SENSORS_ASB100
tristate "Asus ASB100 Bach"
depends on I2C && EXPERIMENTAL
select I2C_SENSOR
help
If you say yes here you get support for the ASB100 Bach sensor
chip found on some Asus mainboards.
This driver can also be built as a module. If so, the module
will be called asb100.
[PATCH] I2C: add new atxp1 driver Adds support for the Attansic ATXP1 I2C device, found on some x86 plattforms to change CPU and other voltages. Depends on the previous i2c-vid.h patch. Signed-off-by: Sebastian Witt <se.witt@gmx.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-04-14 04:27:53 +08:00
config SENSORS_ATXP1
tristate "Attansic ATXP1 VID controller"
depends on I2C && EXPERIMENTAL
help
If you say yes here you get support for the Attansic ATXP1 VID
controller.
If your board have such a chip, you are able to control your CPU
core and other voltages.
This driver can also be built as a module. If so, the module
will be called atxp1.
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
config SENSORS_DS1621
tristate "Dallas Semiconductor DS1621 and DS1625"
depends on I2C && EXPERIMENTAL
select I2C_SENSOR
help
If you say yes here you get support for Dallas Semiconductor
DS1621 and DS1625 sensor chips.
This driver can also be built as a module. If so, the module
will be called ds1621.
config SENSORS_FSCHER
tristate "FSC Hermes"
depends on I2C && EXPERIMENTAL
select I2C_SENSOR
help
If you say yes here you get support for Fujitsu Siemens
Computers Hermes sensor chips.
This driver can also be built as a module. If so, the module
will be called fscher.
config SENSORS_FSCPOS
tristate "FSC Poseidon"
depends on I2C && EXPERIMENTAL
select I2C_SENSOR
help
If you say yes here you get support for Fujitsu Siemens
Computers Poseidon sensor chips.
This driver can also be built as a module. If so, the module
will be called fscpos.
config SENSORS_GL518SM
tristate "Genesys Logic GL518SM"
depends on I2C && EXPERIMENTAL
select I2C_SENSOR
help
If you say yes here you get support for Genesys Logic GL518SM
sensor chips.
This driver can also be built as a module. If so, the module
will be called gl518sm.
config SENSORS_GL520SM
tristate "Genesys Logic GL520SM"
depends on I2C && EXPERIMENTAL
select I2C_SENSOR
help
If you say yes here you get support for Genesys Logic GL520SM
sensor chips.
This driver can also be built as a module. If so, the module
will be called gl520sm.
config SENSORS_IT87
tristate "ITE IT87xx and compatibles"
depends on I2C && EXPERIMENTAL
select I2C_SENSOR
help
If you say yes here you get support for ITE IT87xx sensor chips
and clones: SiS960.
This driver can also be built as a module. If so, the module
will be called it87.
config SENSORS_LM63
tristate "National Semiconductor LM63"
depends on I2C && EXPERIMENTAL
select I2C_SENSOR
help
If you say yes here you get support for the National Semiconductor
LM63 remote diode digital temperature sensor with integrated fan
control. Such chips are found on the Tyan S4882 (Thunder K8QS Pro)
motherboard, among others.
This driver can also be built as a module. If so, the module
will be called lm63.
config SENSORS_LM75
tristate "National Semiconductor LM75 and compatibles"
depends on I2C && EXPERIMENTAL
select I2C_SENSOR
help
If you say yes here you get support for National Semiconductor LM75
sensor chips and clones: Dallas Semiconductor DS75 and DS1775 (in
9-bit precision mode), and TelCom (now Microchip) TCN75.
The DS75 and DS1775 in 10- to 12-bit precision modes will require
a force module parameter. The driver will not handle the extra
precision anyhow.
This driver can also be built as a module. If so, the module
will be called lm75.
config SENSORS_LM77
tristate "National Semiconductor LM77"
depends on I2C && EXPERIMENTAL
select I2C_SENSOR
help
If you say yes here you get support for National Semiconductor LM77
sensor chips.
This driver can also be built as a module. If so, the module
will be called lm77.
config SENSORS_LM78
tristate "National Semiconductor LM78 and compatibles"
depends on I2C && EXPERIMENTAL
select I2C_SENSOR
help
If you say yes here you get support for National Semiconductor LM78,
[PATCH] I2C: chips/Kconfig corrections Here are some corrections for drivers/i2c/chips/Kconfig. Signed-off-by: Alexey Fisher <fishor@gmx.net> Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-05-18 00:09:36 +08:00
LM78-J and LM79.
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
This driver can also be built as a module. If so, the module
will be called lm78.
config SENSORS_LM80
tristate "National Semiconductor LM80"
depends on I2C && EXPERIMENTAL
select I2C_SENSOR
help
If you say yes here you get support for National Semiconductor
LM80 sensor chips.
This driver can also be built as a module. If so, the module
will be called lm80.
config SENSORS_LM83
tristate "National Semiconductor LM83"
depends on I2C
select I2C_SENSOR
help
If you say yes here you get support for National Semiconductor
LM83 sensor chips.
This driver can also be built as a module. If so, the module
will be called lm83.
config SENSORS_LM85
tristate "National Semiconductor LM85 and compatibles"
depends on I2C && EXPERIMENTAL
select I2C_SENSOR
help
If you say yes here you get support for National Semiconductor LM85
[PATCH] I2C: chips/Kconfig corrections Here are some corrections for drivers/i2c/chips/Kconfig. Signed-off-by: Alexey Fisher <fishor@gmx.net> Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-05-18 00:09:36 +08:00
sensor chips and clones: ADT7463, EMC6D100, EMC6D102 and ADM1027.
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
This driver can also be built as a module. If so, the module
will be called lm85.
config SENSORS_LM87
tristate "National Semiconductor LM87"
depends on I2C && EXPERIMENTAL
select I2C_SENSOR
help
If you say yes here you get support for National Semiconductor LM87
sensor chips.
This driver can also be built as a module. If so, the module
will be called lm87.
config SENSORS_LM90
tristate "National Semiconductor LM90 and compatibles"
depends on I2C
select I2C_SENSOR
help
If you say yes here you get support for National Semiconductor LM90,
LM86, LM89 and LM99, Analog Devices ADM1032 and Maxim MAX6657 and
MAX6658 sensor chips.
The Analog Devices ADT7461 sensor chip is also supported, but only
if found in ADM1032 compatibility mode.
This driver can also be built as a module. If so, the module
will be called lm90.
config SENSORS_LM92
tristate "National Semiconductor LM92 and compatibles"
depends on I2C && EXPERIMENTAL
select I2C_SENSOR
help
If you say yes here you get support for National Semiconductor LM92
and Maxim MAX6635 sensor chips.
This driver can also be built as a module. If so, the module
will be called lm92.
config SENSORS_MAX1619
tristate "Maxim MAX1619 sensor chip"
depends on I2C && EXPERIMENTAL
select I2C_SENSOR
help
If you say yes here you get support for MAX1619 sensor chip.
This driver can also be built as a module. If so, the module
will be called max1619.
config SENSORS_PC87360
tristate "National Semiconductor PC87360 family"
depends on I2C && EXPERIMENTAL
select I2C_SENSOR
select I2C_ISA
help
If you say yes here you get access to the hardware monitoring
functions of the National Semiconductor PC8736x Super-I/O chips.
The PC87360, PC87363 and PC87364 only have fan monitoring and
control. The PC87365 and PC87366 additionally have voltage and
temperature monitoring.
This driver can also be built as a module. If so, the module
will be called pc87360.
config SENSORS_SMSC47B397
tristate "SMSC LPC47B397-NC"
depends on I2C && EXPERIMENTAL
select I2C_SENSOR
select I2C_ISA
help
If you say yes here you get support for the SMSC LPC47B397-NC
sensor chip.
This driver can also be built as a module. If so, the module
will be called smsc47b397.
config SENSORS_SIS5595
tristate "Silicon Integrated Systems Corp. SiS5595"
depends on I2C && PCI && EXPERIMENTAL
select I2C_SENSOR
select I2C_ISA
help
If you say yes here you get support for the integrated sensors in
SiS5595 South Bridges.
This driver can also be built as a module. If so, the module
will be called sis5595.
config SENSORS_SMSC47M1
tristate "SMSC LPC47M10x and compatibles"
depends on I2C && EXPERIMENTAL
select I2C_SENSOR
select I2C_ISA
help
If you say yes here you get support for the integrated fan
monitoring and control capabilities of the SMSC LPC47B27x,
[PATCH] I2C: Add support for the LPC47M15x and LPC47M192 chips to smsc47m1 This simple patch adds support for the SMSC LPC47M15x and LPC47M192 chips to the smsc47m1 hardware monitoring driver. These chips are compatible with the other ones already supported by the driver, so I see no reason not to support them, especially when the Linux 2.4 version of the driver does already. I also modified the info printks to name the chips by their real name. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-04-27 04:09:43 +08:00
LPC47M10x, LPC47M13x, LPC47M14x, LPC47M15x and LPC47M192 chips.
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
This driver can also be built as a module. If so, the module
will be called smsc47m1.
config SENSORS_VIA686A
tristate "VIA686A"
depends on I2C && PCI && EXPERIMENTAL
select I2C_SENSOR
select I2C_ISA
help
If you say yes here you get support for the integrated sensors in
Via 686A/B South Bridges.
This driver can also be built as a module. If so, the module
will be called via686a.
config SENSORS_W83781D
tristate "Winbond W83781D, W83782D, W83783S, W83627HF, Asus AS99127F"
depends on I2C && EXPERIMENTAL
select I2C_SENSOR
help
If you say yes here you get support for the Winbond W8378x series
of sensor chips: the W83781D, W83782D, W83783S and W83627HF,
and the similar Asus AS99127F.
This driver can also be built as a module. If so, the module
will be called w83781d.
config SENSORS_W83L785TS
tristate "Winbond W83L785TS-S"
depends on I2C && EXPERIMENTAL
select I2C_SENSOR
help
If you say yes here you get support for the Winbond W83L785TS-S
sensor chip, which is used on the Asus A7N8X, among other
motherboards.
This driver can also be built as a module. If so, the module
will be called w83l785ts.
config SENSORS_W83627HF
tristate "Winbond W83627HF, W83627THF, W83637HF, W83697HF"
depends on I2C && EXPERIMENTAL
select I2C_SENSOR
select I2C_ISA
help
If you say yes here you get support for the Winbond W836X7 series
of sensor chips: the W83627HF, W83627THF, W83637HF, and the W83697HF
This driver can also be built as a module. If so, the module
will be called w83627hf.
[PATCH] I2C: New hardware monitoring driver: w83627ehf This is a new hardware monitoring driver, w83627ehf, which supports the Winbond W83627EHF Super-I/O chip. The driver is not complete, but already usable. It only implements fan speed and temperature monitoring, while the chip also supports voltage inputs with VID, PWM output and temperature sensor selection. I have no more time to work on this, but anyone with supported hardware could add the missing functionalities later. This driver is largely derived from the w83627hf driver. Thanks to Leon Moonen and Steve Cliffe for tesing the preliminary versions of my driver and reporting the problems they encountered. Thanks to Grant Coady for noticing and fixing various corner cases in the fan management. This third version of the driver hopefully addresses all the issues the original version had. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-04-26 04:43:25 +08:00
config SENSORS_W83627EHF
tristate "Winbond W83627EHF"
depends on I2C && EXPERIMENTAL
select I2C_SENSOR
select I2C_ISA
help
If you say yes here you get preliminary support for the hardware
monitoring functionality of the Winbond W83627EHF Super-I/O chip.
Only fan and temperature inputs are supported at the moment, while
the chip does much more than that.
This driver can also be built as a module. If so, the module
will be called w83627ehf.
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
endmenu
menu "Other I2C Chip support"
depends on I2C
config SENSORS_DS1337
[PATCH] ds1337 driver works also with ds1339 chip On Wed, May 04, 2005 at 12:07:11PM +0200, Jean Delvare wrote: > Additionally, I would welcome an additional patch documenting the fact > that the ds1337 driver will work fine with the Dallas DS1339 real-time > clock chip. Document the fact that ds1337 driver works also with DS1339 real-time clock chip. Signed-off-by: Ladislav Michl <ladis@linux-mips.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-05-10 20:08:04 +08:00
tristate "Dallas Semiconductor DS1337 and DS1339 Real Time Clock"
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
depends on I2C && EXPERIMENTAL
select I2C_SENSOR
help
If you say yes here you get support for Dallas Semiconductor
[PATCH] ds1337 driver works also with ds1339 chip On Wed, May 04, 2005 at 12:07:11PM +0200, Jean Delvare wrote: > Additionally, I would welcome an additional patch documenting the fact > that the ds1337 driver will work fine with the Dallas DS1339 real-time > clock chip. Document the fact that ds1337 driver works also with DS1339 real-time clock chip. Signed-off-by: Ladislav Michl <ladis@linux-mips.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-05-10 20:08:04 +08:00
DS1337 and DS1339 real-time clock chips.
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
This driver can also be built as a module. If so, the module
will be called ds1337.
config SENSORS_EEPROM
tristate "EEPROM reader"
depends on I2C && EXPERIMENTAL
select I2C_SENSOR
help
If you say yes here you get read-only access to the EEPROM data
available on modern memory DIMMs and Sony Vaio laptops. Such
EEPROMs could theoretically be available on other devices as well.
This driver can also be built as a module. If so, the module
will be called eeprom.
config SENSORS_PCF8574
tristate "Philips PCF8574 and PCF8574A"
depends on I2C && EXPERIMENTAL
select I2C_SENSOR
help
If you say yes here you get support for Philips PCF8574 and
PCF8574A chips.
This driver can also be built as a module. If so, the module
will be called pcf8574.
config SENSORS_PCF8591
tristate "Philips PCF8591"
depends on I2C && EXPERIMENTAL
select I2C_SENSOR
help
If you say yes here you get support for Philips PCF8591 chips.
This driver can also be built as a module. If so, the module
will be called pcf8591.
config SENSORS_RTC8564
tristate "Epson 8564 RTC chip"
depends on I2C && EXPERIMENTAL
select I2C_SENSOR
help
If you say yes here you get support for the Epson 8564 RTC chip.
This driver can also be built as a module. If so, the module
will be called i2c-rtc8564.
config ISP1301_OMAP
tristate "Philips ISP1301 with OMAP OTG"
depends on I2C && ARCH_OMAP_OTG
help
If you say yes here you get support for the Philips ISP1301
USB-On-The-Go transceiver working with the OMAP OTG controller.
The ISP1301 is used in products including H2 and H3 development
boards for Texas Instruments OMAP processors.
This driver can also be built as a module. If so, the module
will be called isp1301_omap.
config SENSORS_M41T00
tristate "ST M41T00 RTC chip"
depends on I2C && PPC32
help
If you say yes here you get support for the ST M41T00 RTC chip.
This driver can also be built as a module. If so, the module
will be called m41t00.
endmenu