UbiquitousOS
/
OpenCloudOS-Kernel
mirror of https://gitee.com/OpenCloudOS/OpenCloudOS-Kernel.git
11
0
Fork 0
Code Issues Projects Releases Wiki Activity
OpenCloudOS-Kernel/sound/pci/hda/hda_bind.c

305 lines
7.0 KiB
C
Raw Normal View History

ALSA: hda - Bind codecs via standard bus Now we create the standard HD-audio bus (/sys/bus/hdaudio), and bind the codec driver with the codec device over there. This is the first step of the whole transition so that the changes to each codec driver are kept as minimal as possible. Each codec driver needs to register hda_codec_driver struct containing the currently existing preset via the new helper macro module_hda_codec_driver(). The old hda_codec_preset_list is replaced with this infrastructure. The generic parsers (for HDMI and other) are also included in the preset with the special IDs to bind uniquely. In HD-audio core side, the device binding code is split to hda_bind.c. It provides the snd_hda_bus_type implementation to match the codec driver with the given codec vendor ID. It also manages the module auto-loading by itself like before: when the matching isn't found, it tries to probe the corresponding codec modules, and finally falls back to the generic drivers. (The special ID mentioned above is set at this stage.) The only visible change to outside is that the hdaudio sysfs entry now appears in /sys/bus/devices, not as a sound class device. More works to move the suspend/resume and remove ops will be (hopefully) done in later patches. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-02-17 22:25:37 +08:00
/*
* HD-audio codec driver binding
* Copyright (c) Takashi Iwai <tiwai@suse.de>
*/
#include <linux/init.h>
#include <linux/slab.h>
#include <linux/mutex.h>
#include <linux/module.h>
#include <linux/export.h>
ALSA: hda - Move codec suspend/resume to codec driver This patch moves the suspend/resume mechanisms down to each codec driver level, as we have a proper codec driver bound on the bus now. Then we get the asynchronous PM gratis without fiddling much in the driver level. As a soft-landing transition, implement the common suspend/resume pm ops for hda_codec_driver and keep the each codec driver intact. Only the callers of suspend/resume in the controller side (azx_suspend() and azx_resume()) are removed. Another involved place is azx_bus_reset() calling the temporary suspend and resume as a hackish method of bus reset. The HD-audio core provide a helper function snd_hda_bus_reset() instead. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-02-18 22:39:59 +08:00
#include <linux/pm.h>
ALSA: hda - Use shutdown driver ops instead of reboot notifier The driver shutdown ops is simpler than registering reboot notifier manually. There should be no functional change by this -- the codec driver calls its own callback while the bus driver just calls azx_stop() like before. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-03-06 00:21:32 +08:00
#include <linux/pm_runtime.h>
ALSA: hda - Bind codecs via standard bus Now we create the standard HD-audio bus (/sys/bus/hdaudio), and bind the codec driver with the codec device over there. This is the first step of the whole transition so that the changes to each codec driver are kept as minimal as possible. Each codec driver needs to register hda_codec_driver struct containing the currently existing preset via the new helper macro module_hda_codec_driver(). The old hda_codec_preset_list is replaced with this infrastructure. The generic parsers (for HDMI and other) are also included in the preset with the special IDs to bind uniquely. In HD-audio core side, the device binding code is split to hda_bind.c. It provides the snd_hda_bus_type implementation to match the codec driver with the given codec vendor ID. It also manages the module auto-loading by itself like before: when the matching isn't found, it tries to probe the corresponding codec modules, and finally falls back to the generic drivers. (The special ID mentioned above is set at this stage.) The only visible change to outside is that the hdaudio sysfs entry now appears in /sys/bus/devices, not as a sound class device. More works to move the suspend/resume and remove ops will be (hopefully) done in later patches. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-02-17 22:25:37 +08:00
#include <sound/core.h>
#include "hda_codec.h"
#include "hda_local.h"
/*
ALSA: hda - convert to hda_device_id Finally we have a proper infrastructure to generate the modaliases automatically, let's move to hda_device_id from the legacy hda_codec_preset that contains basically the same information. The patch function hook is stored in driver_data field, which is long, and we need an explicit cast. Other than that, the conversion is mostly straightforward. Each entry is even simplified using a macro, and the lengthy (and error-prone) manual modaliases got removed. As a result, we achieved a quite good diet: 14 files changed, 407 insertions(+), 595 deletions(-) Reviewed-by: Vinod Koul <vinod.koul@intel.com> Tested-by: Subhransu S Prusty <subhransu.s.prusty@intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-10-01 22:20:04 +08:00
* find a matching codec id
ALSA: hda - Bind codecs via standard bus Now we create the standard HD-audio bus (/sys/bus/hdaudio), and bind the codec driver with the codec device over there. This is the first step of the whole transition so that the changes to each codec driver are kept as minimal as possible. Each codec driver needs to register hda_codec_driver struct containing the currently existing preset via the new helper macro module_hda_codec_driver(). The old hda_codec_preset_list is replaced with this infrastructure. The generic parsers (for HDMI and other) are also included in the preset with the special IDs to bind uniquely. In HD-audio core side, the device binding code is split to hda_bind.c. It provides the snd_hda_bus_type implementation to match the codec driver with the given codec vendor ID. It also manages the module auto-loading by itself like before: when the matching isn't found, it tries to probe the corresponding codec modules, and finally falls back to the generic drivers. (The special ID mentioned above is set at this stage.) The only visible change to outside is that the hdaudio sysfs entry now appears in /sys/bus/devices, not as a sound class device. More works to move the suspend/resume and remove ops will be (hopefully) done in later patches. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-02-17 22:25:37 +08:00
*/
ALSA: hda - Make snd_hda_bus_type public Define the common hd-audio driver and device types to bind over snd_hda_bus_type publicly. This allows to implement other type of device and driver code over hd-audio bus. Now both struct hda_codec and struct hda_codec_driver inherit these new struct hdac_device and struct hdac_driver, respectively. The bus registration is done in subsys_initcall() to assure it before any other driver registrations. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-02-18 04:46:37 +08:00
static int hda_codec_match(struct hdac_device *dev, struct hdac_driver *drv)
ALSA: hda - Bind codecs via standard bus Now we create the standard HD-audio bus (/sys/bus/hdaudio), and bind the codec driver with the codec device over there. This is the first step of the whole transition so that the changes to each codec driver are kept as minimal as possible. Each codec driver needs to register hda_codec_driver struct containing the currently existing preset via the new helper macro module_hda_codec_driver(). The old hda_codec_preset_list is replaced with this infrastructure. The generic parsers (for HDMI and other) are also included in the preset with the special IDs to bind uniquely. In HD-audio core side, the device binding code is split to hda_bind.c. It provides the snd_hda_bus_type implementation to match the codec driver with the given codec vendor ID. It also manages the module auto-loading by itself like before: when the matching isn't found, it tries to probe the corresponding codec modules, and finally falls back to the generic drivers. (The special ID mentioned above is set at this stage.) The only visible change to outside is that the hdaudio sysfs entry now appears in /sys/bus/devices, not as a sound class device. More works to move the suspend/resume and remove ops will be (hopefully) done in later patches. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-02-17 22:25:37 +08:00
{
ALSA: hda - Make snd_hda_bus_type public Define the common hd-audio driver and device types to bind over snd_hda_bus_type publicly. This allows to implement other type of device and driver code over hd-audio bus. Now both struct hda_codec and struct hda_codec_driver inherit these new struct hdac_device and struct hdac_driver, respectively. The bus registration is done in subsys_initcall() to assure it before any other driver registrations. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-02-18 04:46:37 +08:00
struct hda_codec *codec = container_of(dev, struct hda_codec, core);
ALSA: hda - Bind codecs via standard bus Now we create the standard HD-audio bus (/sys/bus/hdaudio), and bind the codec driver with the codec device over there. This is the first step of the whole transition so that the changes to each codec driver are kept as minimal as possible. Each codec driver needs to register hda_codec_driver struct containing the currently existing preset via the new helper macro module_hda_codec_driver(). The old hda_codec_preset_list is replaced with this infrastructure. The generic parsers (for HDMI and other) are also included in the preset with the special IDs to bind uniquely. In HD-audio core side, the device binding code is split to hda_bind.c. It provides the snd_hda_bus_type implementation to match the codec driver with the given codec vendor ID. It also manages the module auto-loading by itself like before: when the matching isn't found, it tries to probe the corresponding codec modules, and finally falls back to the generic drivers. (The special ID mentioned above is set at this stage.) The only visible change to outside is that the hdaudio sysfs entry now appears in /sys/bus/devices, not as a sound class device. More works to move the suspend/resume and remove ops will be (hopefully) done in later patches. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-02-17 22:25:37 +08:00
struct hda_codec_driver *driver =
ALSA: hda - Make snd_hda_bus_type public Define the common hd-audio driver and device types to bind over snd_hda_bus_type publicly. This allows to implement other type of device and driver code over hd-audio bus. Now both struct hda_codec and struct hda_codec_driver inherit these new struct hdac_device and struct hdac_driver, respectively. The bus registration is done in subsys_initcall() to assure it before any other driver registrations. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-02-18 04:46:37 +08:00
container_of(drv, struct hda_codec_driver, core);
ALSA: hda - convert to hda_device_id Finally we have a proper infrastructure to generate the modaliases automatically, let's move to hda_device_id from the legacy hda_codec_preset that contains basically the same information. The patch function hook is stored in driver_data field, which is long, and we need an explicit cast. Other than that, the conversion is mostly straightforward. Each entry is even simplified using a macro, and the lengthy (and error-prone) manual modaliases got removed. As a result, we achieved a quite good diet: 14 files changed, 407 insertions(+), 595 deletions(-) Reviewed-by: Vinod Koul <vinod.koul@intel.com> Tested-by: Subhransu S Prusty <subhransu.s.prusty@intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-10-01 22:20:04 +08:00
const struct hda_device_id *list;
ALSA: hda - Bind codecs via standard bus Now we create the standard HD-audio bus (/sys/bus/hdaudio), and bind the codec driver with the codec device over there. This is the first step of the whole transition so that the changes to each codec driver are kept as minimal as possible. Each codec driver needs to register hda_codec_driver struct containing the currently existing preset via the new helper macro module_hda_codec_driver(). The old hda_codec_preset_list is replaced with this infrastructure. The generic parsers (for HDMI and other) are also included in the preset with the special IDs to bind uniquely. In HD-audio core side, the device binding code is split to hda_bind.c. It provides the snd_hda_bus_type implementation to match the codec driver with the given codec vendor ID. It also manages the module auto-loading by itself like before: when the matching isn't found, it tries to probe the corresponding codec modules, and finally falls back to the generic drivers. (The special ID mentioned above is set at this stage.) The only visible change to outside is that the hdaudio sysfs entry now appears in /sys/bus/devices, not as a sound class device. More works to move the suspend/resume and remove ops will be (hopefully) done in later patches. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-02-17 22:25:37 +08:00
/* check probe_id instead of vendor_id if set */
ALSA: hda - Move a part of hda_codec stuff into hdac_device Now some codes and functionalities of hda_codec struct are moved to hdac_device struct. A few basic attributes like the codec address, vendor ID number, FG numbers, etc are moved to hdac_device, and they are accessed like codec->core.addr. The basic verb exec functions are moved, too. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-03-03 17:07:24 +08:00
u32 id = codec->probe_id ? codec->probe_id : codec->core.vendor_id;
ALSA: hda - convert to hda_device_id Finally we have a proper infrastructure to generate the modaliases automatically, let's move to hda_device_id from the legacy hda_codec_preset that contains basically the same information. The patch function hook is stored in driver_data field, which is long, and we need an explicit cast. Other than that, the conversion is mostly straightforward. Each entry is even simplified using a macro, and the lengthy (and error-prone) manual modaliases got removed. As a result, we achieved a quite good diet: 14 files changed, 407 insertions(+), 595 deletions(-) Reviewed-by: Vinod Koul <vinod.koul@intel.com> Tested-by: Subhransu S Prusty <subhransu.s.prusty@intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-10-01 22:20:04 +08:00
u32 rev_id = codec->core.revision_id;
ALSA: hda - Bind codecs via standard bus Now we create the standard HD-audio bus (/sys/bus/hdaudio), and bind the codec driver with the codec device over there. This is the first step of the whole transition so that the changes to each codec driver are kept as minimal as possible. Each codec driver needs to register hda_codec_driver struct containing the currently existing preset via the new helper macro module_hda_codec_driver(). The old hda_codec_preset_list is replaced with this infrastructure. The generic parsers (for HDMI and other) are also included in the preset with the special IDs to bind uniquely. In HD-audio core side, the device binding code is split to hda_bind.c. It provides the snd_hda_bus_type implementation to match the codec driver with the given codec vendor ID. It also manages the module auto-loading by itself like before: when the matching isn't found, it tries to probe the corresponding codec modules, and finally falls back to the generic drivers. (The special ID mentioned above is set at this stage.) The only visible change to outside is that the hdaudio sysfs entry now appears in /sys/bus/devices, not as a sound class device. More works to move the suspend/resume and remove ops will be (hopefully) done in later patches. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-02-17 22:25:37 +08:00
ALSA: hda - convert to hda_device_id Finally we have a proper infrastructure to generate the modaliases automatically, let's move to hda_device_id from the legacy hda_codec_preset that contains basically the same information. The patch function hook is stored in driver_data field, which is long, and we need an explicit cast. Other than that, the conversion is mostly straightforward. Each entry is even simplified using a macro, and the lengthy (and error-prone) manual modaliases got removed. As a result, we achieved a quite good diet: 14 files changed, 407 insertions(+), 595 deletions(-) Reviewed-by: Vinod Koul <vinod.koul@intel.com> Tested-by: Subhransu S Prusty <subhransu.s.prusty@intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-10-01 22:20:04 +08:00
for (list = driver->id; list->vendor_id; list++) {
if (list->vendor_id == id &&
(!list->rev_id || list->rev_id == rev_id)) {
codec->preset = list;
ALSA: hda - Bind codecs via standard bus Now we create the standard HD-audio bus (/sys/bus/hdaudio), and bind the codec driver with the codec device over there. This is the first step of the whole transition so that the changes to each codec driver are kept as minimal as possible. Each codec driver needs to register hda_codec_driver struct containing the currently existing preset via the new helper macro module_hda_codec_driver(). The old hda_codec_preset_list is replaced with this infrastructure. The generic parsers (for HDMI and other) are also included in the preset with the special IDs to bind uniquely. In HD-audio core side, the device binding code is split to hda_bind.c. It provides the snd_hda_bus_type implementation to match the codec driver with the given codec vendor ID. It also manages the module auto-loading by itself like before: when the matching isn't found, it tries to probe the corresponding codec modules, and finally falls back to the generic drivers. (The special ID mentioned above is set at this stage.) The only visible change to outside is that the hdaudio sysfs entry now appears in /sys/bus/devices, not as a sound class device. More works to move the suspend/resume and remove ops will be (hopefully) done in later patches. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-02-17 22:25:37 +08:00
return 1;
}
}
return 0;
}
ALSA: hda - Move some codes up to hdac_bus struct A few basic codes for communicating over HD-audio bus are moved to struct hdac_bus now. It has only command and get_response ops in addition to the unsolicited event handling. Note that the codec-side tracing support is disabled temporarily during this transition due to the code shuffling. It will be re-enabled later once when all pieces are settled down. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-03-03 06:22:59 +08:00
/* process an unsolicited event */
static void hda_codec_unsol_event(struct hdac_device *dev, unsigned int ev)
{
struct hda_codec *codec = container_of(dev, struct hda_codec, core);
if (codec->patch_ops.unsol_event)
codec->patch_ops.unsol_event(codec, ev);
}
ALSA: hda - consolidate chip rename functions A few multiple codec drivers do renaming the chip_name string but all these are open-coded and some of them have even no error check. Let's make common helpers to do it properly. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-10-01 23:59:43 +08:00
/**
* snd_hda_codec_set_name - set the codec name
* @codec: the HDA codec
* @name: name string to set
*/
int snd_hda_codec_set_name(struct hda_codec *codec, const char *name)
ALSA: hda - Bind codecs via standard bus Now we create the standard HD-audio bus (/sys/bus/hdaudio), and bind the codec driver with the codec device over there. This is the first step of the whole transition so that the changes to each codec driver are kept as minimal as possible. Each codec driver needs to register hda_codec_driver struct containing the currently existing preset via the new helper macro module_hda_codec_driver(). The old hda_codec_preset_list is replaced with this infrastructure. The generic parsers (for HDMI and other) are also included in the preset with the special IDs to bind uniquely. In HD-audio core side, the device binding code is split to hda_bind.c. It provides the snd_hda_bus_type implementation to match the codec driver with the given codec vendor ID. It also manages the module auto-loading by itself like before: when the matching isn't found, it tries to probe the corresponding codec modules, and finally falls back to the generic drivers. (The special ID mentioned above is set at this stage.) The only visible change to outside is that the hdaudio sysfs entry now appears in /sys/bus/devices, not as a sound class device. More works to move the suspend/resume and remove ops will be (hopefully) done in later patches. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-02-17 22:25:37 +08:00
{
ALSA: hda - consolidate chip rename functions A few multiple codec drivers do renaming the chip_name string but all these are open-coded and some of them have even no error check. Let's make common helpers to do it properly. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-10-01 23:59:43 +08:00
int err;
if (!name)
return 0;
err = snd_hdac_device_set_chip_name(&codec->core, name);
if (err < 0)
return err;
/* update the mixer name */
ALSA: hda - Update mixer name for the lower codec address In most cases, we prefer the onboard codec as the primary device, thus it's better to set it as the mixer name. Currently, however, the mixer name is updated per the device instantiation order, and user gets often HDMI/DP or other seen as a mixer chip name. Also, if a codec name is renamed by the driver, the old chip name might be left still as the mixer name. This patch addresses these issues by remembering the chip address that was referred as the mixer name. When a codec with the same or lower address gives its name, renew the mixer name accordingly, as it's either the update of the codec name or we get likely the more appropriate chip as the reference. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-10-15 20:06:14 +08:00
if (!*codec->card->mixername ||
ALSA: hda - Fix bogus codec address check for mixer name assignment The recent commit [7fbe824a0f0e: ALSA: hda - Update mixer name for the lower codec address] tried to improve the mixer chip name assignment in the order of codec address. However, this fix was utterly bogus; it checks the field set in each codec, thus this value is reset at each codec creation, of course. For really handling this priority, the assignment has to be remembered in the common place, namely in hda_bus, instead of hda_codec. Fixes: 7fbe824a0f0e ('ALSA: hda - Update mixer name for the lower codec address') Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-10-18 00:25:38 +08:00
codec->bus->mixer_assigned >= codec->core.addr) {
ALSA: hda - consolidate chip rename functions A few multiple codec drivers do renaming the chip_name string but all these are open-coded and some of them have even no error check. Let's make common helpers to do it properly. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-10-01 23:59:43 +08:00
snprintf(codec->card->mixername,
sizeof(codec->card->mixername), "%s %s",
codec->core.vendor_name, codec->core.chip_name);
ALSA: hda - Fix bogus codec address check for mixer name assignment The recent commit [7fbe824a0f0e: ALSA: hda - Update mixer name for the lower codec address] tried to improve the mixer chip name assignment in the order of codec address. However, this fix was utterly bogus; it checks the field set in each codec, thus this value is reset at each codec creation, of course. For really handling this priority, the assignment has to be remembered in the common place, namely in hda_bus, instead of hda_codec. Fixes: 7fbe824a0f0e ('ALSA: hda - Update mixer name for the lower codec address') Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-10-18 00:25:38 +08:00
codec->bus->mixer_assigned = codec->core.addr;
ALSA: hda - Bind codecs via standard bus Now we create the standard HD-audio bus (/sys/bus/hdaudio), and bind the codec driver with the codec device over there. This is the first step of the whole transition so that the changes to each codec driver are kept as minimal as possible. Each codec driver needs to register hda_codec_driver struct containing the currently existing preset via the new helper macro module_hda_codec_driver(). The old hda_codec_preset_list is replaced with this infrastructure. The generic parsers (for HDMI and other) are also included in the preset with the special IDs to bind uniquely. In HD-audio core side, the device binding code is split to hda_bind.c. It provides the snd_hda_bus_type implementation to match the codec driver with the given codec vendor ID. It also manages the module auto-loading by itself like before: when the matching isn't found, it tries to probe the corresponding codec modules, and finally falls back to the generic drivers. (The special ID mentioned above is set at this stage.) The only visible change to outside is that the hdaudio sysfs entry now appears in /sys/bus/devices, not as a sound class device. More works to move the suspend/resume and remove ops will be (hopefully) done in later patches. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-02-17 22:25:37 +08:00
}
ALSA: hda - consolidate chip rename functions A few multiple codec drivers do renaming the chip_name string but all these are open-coded and some of them have even no error check. Let's make common helpers to do it properly. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-10-01 23:59:43 +08:00
return 0;
ALSA: hda - Bind codecs via standard bus Now we create the standard HD-audio bus (/sys/bus/hdaudio), and bind the codec driver with the codec device over there. This is the first step of the whole transition so that the changes to each codec driver are kept as minimal as possible. Each codec driver needs to register hda_codec_driver struct containing the currently existing preset via the new helper macro module_hda_codec_driver(). The old hda_codec_preset_list is replaced with this infrastructure. The generic parsers (for HDMI and other) are also included in the preset with the special IDs to bind uniquely. In HD-audio core side, the device binding code is split to hda_bind.c. It provides the snd_hda_bus_type implementation to match the codec driver with the given codec vendor ID. It also manages the module auto-loading by itself like before: when the matching isn't found, it tries to probe the corresponding codec modules, and finally falls back to the generic drivers. (The special ID mentioned above is set at this stage.) The only visible change to outside is that the hdaudio sysfs entry now appears in /sys/bus/devices, not as a sound class device. More works to move the suspend/resume and remove ops will be (hopefully) done in later patches. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-02-17 22:25:37 +08:00
}
ALSA: hda - consolidate chip rename functions A few multiple codec drivers do renaming the chip_name string but all these are open-coded and some of them have even no error check. Let's make common helpers to do it properly. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-10-01 23:59:43 +08:00
EXPORT_SYMBOL_GPL(snd_hda_codec_set_name);
ALSA: hda - Bind codecs via standard bus Now we create the standard HD-audio bus (/sys/bus/hdaudio), and bind the codec driver with the codec device over there. This is the first step of the whole transition so that the changes to each codec driver are kept as minimal as possible. Each codec driver needs to register hda_codec_driver struct containing the currently existing preset via the new helper macro module_hda_codec_driver(). The old hda_codec_preset_list is replaced with this infrastructure. The generic parsers (for HDMI and other) are also included in the preset with the special IDs to bind uniquely. In HD-audio core side, the device binding code is split to hda_bind.c. It provides the snd_hda_bus_type implementation to match the codec driver with the given codec vendor ID. It also manages the module auto-loading by itself like before: when the matching isn't found, it tries to probe the corresponding codec modules, and finally falls back to the generic drivers. (The special ID mentioned above is set at this stage.) The only visible change to outside is that the hdaudio sysfs entry now appears in /sys/bus/devices, not as a sound class device. More works to move the suspend/resume and remove ops will be (hopefully) done in later patches. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-02-17 22:25:37 +08:00
static int hda_codec_driver_probe(struct device *dev)
{
struct hda_codec *codec = dev_to_hda_codec(dev);
struct module *owner = dev->driver->owner;
ALSA: hda - convert to hda_device_id Finally we have a proper infrastructure to generate the modaliases automatically, let's move to hda_device_id from the legacy hda_codec_preset that contains basically the same information. The patch function hook is stored in driver_data field, which is long, and we need an explicit cast. Other than that, the conversion is mostly straightforward. Each entry is even simplified using a macro, and the lengthy (and error-prone) manual modaliases got removed. As a result, we achieved a quite good diet: 14 files changed, 407 insertions(+), 595 deletions(-) Reviewed-by: Vinod Koul <vinod.koul@intel.com> Tested-by: Subhransu S Prusty <subhransu.s.prusty@intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-10-01 22:20:04 +08:00
hda_codec_patch_t patch;
ALSA: hda - Bind codecs via standard bus Now we create the standard HD-audio bus (/sys/bus/hdaudio), and bind the codec driver with the codec device over there. This is the first step of the whole transition so that the changes to each codec driver are kept as minimal as possible. Each codec driver needs to register hda_codec_driver struct containing the currently existing preset via the new helper macro module_hda_codec_driver(). The old hda_codec_preset_list is replaced with this infrastructure. The generic parsers (for HDMI and other) are also included in the preset with the special IDs to bind uniquely. In HD-audio core side, the device binding code is split to hda_bind.c. It provides the snd_hda_bus_type implementation to match the codec driver with the given codec vendor ID. It also manages the module auto-loading by itself like before: when the matching isn't found, it tries to probe the corresponding codec modules, and finally falls back to the generic drivers. (The special ID mentioned above is set at this stage.) The only visible change to outside is that the hdaudio sysfs entry now appears in /sys/bus/devices, not as a sound class device. More works to move the suspend/resume and remove ops will be (hopefully) done in later patches. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-02-17 22:25:37 +08:00
int err;
if (WARN_ON(!codec->preset))
return -EINVAL;
ALSA: hda - consolidate chip rename functions A few multiple codec drivers do renaming the chip_name string but all these are open-coded and some of them have even no error check. Let's make common helpers to do it properly. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-10-01 23:59:43 +08:00
err = snd_hda_codec_set_name(codec, codec->preset->name);
ALSA: hda - Add regmap support This patch adds an infrastructure to support regmap-based verb accesses. Because o the asymmetric nature of HD-audio verbs, especially the amp verbs, we need to translate the verbs as a sort of pseudo registers to be mapped uniquely in regmap. In this patch, a pseudo register is built from the NID, the AC_VERB_GET_* and 8bit parameters, i.e. almost in the form to be sent to HD-audio bus but without codec address field. OTOH, for writing, the same pseudo register is translated to AC_VERB_SET_* automatically. The AC_VERB_SET_AMP_* verb is re-encoded from the corresponding AC_VERB_GET_AMP_* verb and parameter at writing. Some verbs has a single command for read but multiple for writes. A write for such a verb is split automatically to multiple verbs. The patch provides also a few handy helper functions. They are designed to be accessible even without regmap. When no regmap is set up (e.g. before the codec device instantiation), the direct hardware access is used. Also, it tries to avoid the unnecessary power-up. The power up/down sequence is performed only on demand. The codec driver needs to call snd_hdac_regmap_exit() and snd_hdac_regmap_exit() at probe and remove if it wants the regmap access. There is one flag added to hdac_device. When the flag lazy_cache is set, regmap helper ignores a write for a suspended device and returns as if it was actually written. It reduces the hardware access pretty much, e.g. when adjusting the mixer volume while in idle. This assumes that the driver will sync the cache later at resume properly, so use it carefully. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-02-25 21:42:38 +08:00
if (err < 0)
goto error;
err = snd_hdac_regmap_init(&codec->core);
ALSA: hda - Bind codecs via standard bus Now we create the standard HD-audio bus (/sys/bus/hdaudio), and bind the codec driver with the codec device over there. This is the first step of the whole transition so that the changes to each codec driver are kept as minimal as possible. Each codec driver needs to register hda_codec_driver struct containing the currently existing preset via the new helper macro module_hda_codec_driver(). The old hda_codec_preset_list is replaced with this infrastructure. The generic parsers (for HDMI and other) are also included in the preset with the special IDs to bind uniquely. In HD-audio core side, the device binding code is split to hda_bind.c. It provides the snd_hda_bus_type implementation to match the codec driver with the given codec vendor ID. It also manages the module auto-loading by itself like before: when the matching isn't found, it tries to probe the corresponding codec modules, and finally falls back to the generic drivers. (The special ID mentioned above is set at this stage.) The only visible change to outside is that the hdaudio sysfs entry now appears in /sys/bus/devices, not as a sound class device. More works to move the suspend/resume and remove ops will be (hopefully) done in later patches. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-02-17 22:25:37 +08:00
if (err < 0)
goto error;
if (!try_module_get(owner)) {
err = -EINVAL;
goto error;
}
ALSA: hda - convert to hda_device_id Finally we have a proper infrastructure to generate the modaliases automatically, let's move to hda_device_id from the legacy hda_codec_preset that contains basically the same information. The patch function hook is stored in driver_data field, which is long, and we need an explicit cast. Other than that, the conversion is mostly straightforward. Each entry is even simplified using a macro, and the lengthy (and error-prone) manual modaliases got removed. As a result, we achieved a quite good diet: 14 files changed, 407 insertions(+), 595 deletions(-) Reviewed-by: Vinod Koul <vinod.koul@intel.com> Tested-by: Subhransu S Prusty <subhransu.s.prusty@intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-10-01 22:20:04 +08:00
patch = (hda_codec_patch_t)codec->preset->driver_data;
if (patch) {
err = patch(codec);
if (err < 0)
goto error_module;
}
ALSA: hda - Build PCMs and controls at codec driver probe This makes the code flow easier -- instead of the controller driver calling snd_hda_build_pcms() and snd_hda_build_controls() explicitly, the codec driver itself builds PCMs and controls at probe time. Then the controller driver only needs to call snd_card_register(). Also, this allows us the full bind/unbind control, too. Even when a codec driver is bound later, it automatically registers the new PCM and controls by itself. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-02-28 03:44:54 +08:00
err = snd_hda_codec_build_pcms(codec);
if (err < 0)
goto error_module;
err = snd_hda_codec_build_controls(codec);
if (err < 0)
goto error_module;
if (codec->card->registered) {
err = snd_card_register(codec->card);
if (err < 0)
goto error_module;
ALSA: hda - Fix possible runtime PM refcount unbalance When the driver is unloaded before the codec is bound, it still keeps the runtime PM refcount up, and results in the unbalance. This patch covers these cases by introducing a flag indicating the runtime PM initialization and handling the codec registration procedure more properly. It also fixes the missing input beep device as a gratis, too. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-03-04 00:22:12 +08:00
snd_hda_codec_register(codec);
ALSA: hda - Bind codecs via standard bus Now we create the standard HD-audio bus (/sys/bus/hdaudio), and bind the codec driver with the codec device over there. This is the first step of the whole transition so that the changes to each codec driver are kept as minimal as possible. Each codec driver needs to register hda_codec_driver struct containing the currently existing preset via the new helper macro module_hda_codec_driver(). The old hda_codec_preset_list is replaced with this infrastructure. The generic parsers (for HDMI and other) are also included in the preset with the special IDs to bind uniquely. In HD-audio core side, the device binding code is split to hda_bind.c. It provides the snd_hda_bus_type implementation to match the codec driver with the given codec vendor ID. It also manages the module auto-loading by itself like before: when the matching isn't found, it tries to probe the corresponding codec modules, and finally falls back to the generic drivers. (The special ID mentioned above is set at this stage.) The only visible change to outside is that the hdaudio sysfs entry now appears in /sys/bus/devices, not as a sound class device. More works to move the suspend/resume and remove ops will be (hopefully) done in later patches. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-02-17 22:25:37 +08:00
}
ALSA: hda - Add regmap support This patch adds an infrastructure to support regmap-based verb accesses. Because o the asymmetric nature of HD-audio verbs, especially the amp verbs, we need to translate the verbs as a sort of pseudo registers to be mapped uniquely in regmap. In this patch, a pseudo register is built from the NID, the AC_VERB_GET_* and 8bit parameters, i.e. almost in the form to be sent to HD-audio bus but without codec address field. OTOH, for writing, the same pseudo register is translated to AC_VERB_SET_* automatically. The AC_VERB_SET_AMP_* verb is re-encoded from the corresponding AC_VERB_GET_AMP_* verb and parameter at writing. Some verbs has a single command for read but multiple for writes. A write for such a verb is split automatically to multiple verbs. The patch provides also a few handy helper functions. They are designed to be accessible even without regmap. When no regmap is set up (e.g. before the codec device instantiation), the direct hardware access is used. Also, it tries to avoid the unnecessary power-up. The power up/down sequence is performed only on demand. The codec driver needs to call snd_hdac_regmap_exit() and snd_hdac_regmap_exit() at probe and remove if it wants the regmap access. There is one flag added to hdac_device. When the flag lazy_cache is set, regmap helper ignores a write for a suspended device and returns as if it was actually written. It reduces the hardware access pretty much, e.g. when adjusting the mixer volume while in idle. This assumes that the driver will sync the cache later at resume properly, so use it carefully. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-02-25 21:42:38 +08:00
codec->core.lazy_cache = true;
ALSA: hda - Bind codecs via standard bus Now we create the standard HD-audio bus (/sys/bus/hdaudio), and bind the codec driver with the codec device over there. This is the first step of the whole transition so that the changes to each codec driver are kept as minimal as possible. Each codec driver needs to register hda_codec_driver struct containing the currently existing preset via the new helper macro module_hda_codec_driver(). The old hda_codec_preset_list is replaced with this infrastructure. The generic parsers (for HDMI and other) are also included in the preset with the special IDs to bind uniquely. In HD-audio core side, the device binding code is split to hda_bind.c. It provides the snd_hda_bus_type implementation to match the codec driver with the given codec vendor ID. It also manages the module auto-loading by itself like before: when the matching isn't found, it tries to probe the corresponding codec modules, and finally falls back to the generic drivers. (The special ID mentioned above is set at this stage.) The only visible change to outside is that the hdaudio sysfs entry now appears in /sys/bus/devices, not as a sound class device. More works to move the suspend/resume and remove ops will be (hopefully) done in later patches. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-02-17 22:25:37 +08:00
return 0;
ALSA: hda - Build PCMs and controls at codec driver probe This makes the code flow easier -- instead of the controller driver calling snd_hda_build_pcms() and snd_hda_build_controls() explicitly, the codec driver itself builds PCMs and controls at probe time. Then the controller driver only needs to call snd_card_register(). Also, this allows us the full bind/unbind control, too. Even when a codec driver is bound later, it automatically registers the new PCM and controls by itself. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-02-28 03:44:54 +08:00
error_module:
module_put(owner);
ALSA: hda - Bind codecs via standard bus Now we create the standard HD-audio bus (/sys/bus/hdaudio), and bind the codec driver with the codec device over there. This is the first step of the whole transition so that the changes to each codec driver are kept as minimal as possible. Each codec driver needs to register hda_codec_driver struct containing the currently existing preset via the new helper macro module_hda_codec_driver(). The old hda_codec_preset_list is replaced with this infrastructure. The generic parsers (for HDMI and other) are also included in the preset with the special IDs to bind uniquely. In HD-audio core side, the device binding code is split to hda_bind.c. It provides the snd_hda_bus_type implementation to match the codec driver with the given codec vendor ID. It also manages the module auto-loading by itself like before: when the matching isn't found, it tries to probe the corresponding codec modules, and finally falls back to the generic drivers. (The special ID mentioned above is set at this stage.) The only visible change to outside is that the hdaudio sysfs entry now appears in /sys/bus/devices, not as a sound class device. More works to move the suspend/resume and remove ops will be (hopefully) done in later patches. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-02-17 22:25:37 +08:00
error:
ALSA: hda - Build PCMs and controls at codec driver probe This makes the code flow easier -- instead of the controller driver calling snd_hda_build_pcms() and snd_hda_build_controls() explicitly, the codec driver itself builds PCMs and controls at probe time. Then the controller driver only needs to call snd_card_register(). Also, this allows us the full bind/unbind control, too. Even when a codec driver is bound later, it automatically registers the new PCM and controls by itself. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-02-28 03:44:54 +08:00
snd_hda_codec_cleanup_for_unbind(codec);
ALSA: hda - Bind codecs via standard bus Now we create the standard HD-audio bus (/sys/bus/hdaudio), and bind the codec driver with the codec device over there. This is the first step of the whole transition so that the changes to each codec driver are kept as minimal as possible. Each codec driver needs to register hda_codec_driver struct containing the currently existing preset via the new helper macro module_hda_codec_driver(). The old hda_codec_preset_list is replaced with this infrastructure. The generic parsers (for HDMI and other) are also included in the preset with the special IDs to bind uniquely. In HD-audio core side, the device binding code is split to hda_bind.c. It provides the snd_hda_bus_type implementation to match the codec driver with the given codec vendor ID. It also manages the module auto-loading by itself like before: when the matching isn't found, it tries to probe the corresponding codec modules, and finally falls back to the generic drivers. (The special ID mentioned above is set at this stage.) The only visible change to outside is that the hdaudio sysfs entry now appears in /sys/bus/devices, not as a sound class device. More works to move the suspend/resume and remove ops will be (hopefully) done in later patches. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-02-17 22:25:37 +08:00
return err;
}
static int hda_codec_driver_remove(struct device *dev)
{
struct hda_codec *codec = dev_to_hda_codec(dev);
if (codec->patch_ops.free)
codec->patch_ops.free(codec);
ALSA: hda - Implement unbind more safely Now we have all pieces ready, and put them into places: - add the hda_pcm refcount to azx_pcm_open() and azx_pcm_close(), - call the most of cleanup code in hda_codec_reset() from the codec driver remove, - call the same code also from the hda_codec object free. Then the codec driver can be unbound more safely now. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-02-28 01:17:28 +08:00
snd_hda_codec_cleanup_for_unbind(codec);
ALSA: hda - Bind codecs via standard bus Now we create the standard HD-audio bus (/sys/bus/hdaudio), and bind the codec driver with the codec device over there. This is the first step of the whole transition so that the changes to each codec driver are kept as minimal as possible. Each codec driver needs to register hda_codec_driver struct containing the currently existing preset via the new helper macro module_hda_codec_driver(). The old hda_codec_preset_list is replaced with this infrastructure. The generic parsers (for HDMI and other) are also included in the preset with the special IDs to bind uniquely. In HD-audio core side, the device binding code is split to hda_bind.c. It provides the snd_hda_bus_type implementation to match the codec driver with the given codec vendor ID. It also manages the module auto-loading by itself like before: when the matching isn't found, it tries to probe the corresponding codec modules, and finally falls back to the generic drivers. (The special ID mentioned above is set at this stage.) The only visible change to outside is that the hdaudio sysfs entry now appears in /sys/bus/devices, not as a sound class device. More works to move the suspend/resume and remove ops will be (hopefully) done in later patches. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-02-17 22:25:37 +08:00
module_put(dev->driver->owner);
return 0;
}
ALSA: hda - Use shutdown driver ops instead of reboot notifier The driver shutdown ops is simpler than registering reboot notifier manually. There should be no functional change by this -- the codec driver calls its own callback while the bus driver just calls azx_stop() like before. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-03-06 00:21:32 +08:00
static void hda_codec_driver_shutdown(struct device *dev)
{
struct hda_codec *codec = dev_to_hda_codec(dev);
if (!pm_runtime_suspended(dev) && codec->patch_ops.reboot_notify)
codec->patch_ops.reboot_notify(codec);
}
ALSA: hda - Bind codecs via standard bus Now we create the standard HD-audio bus (/sys/bus/hdaudio), and bind the codec driver with the codec device over there. This is the first step of the whole transition so that the changes to each codec driver are kept as minimal as possible. Each codec driver needs to register hda_codec_driver struct containing the currently existing preset via the new helper macro module_hda_codec_driver(). The old hda_codec_preset_list is replaced with this infrastructure. The generic parsers (for HDMI and other) are also included in the preset with the special IDs to bind uniquely. In HD-audio core side, the device binding code is split to hda_bind.c. It provides the snd_hda_bus_type implementation to match the codec driver with the given codec vendor ID. It also manages the module auto-loading by itself like before: when the matching isn't found, it tries to probe the corresponding codec modules, and finally falls back to the generic drivers. (The special ID mentioned above is set at this stage.) The only visible change to outside is that the hdaudio sysfs entry now appears in /sys/bus/devices, not as a sound class device. More works to move the suspend/resume and remove ops will be (hopefully) done in later patches. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-02-17 22:25:37 +08:00
int __hda_codec_driver_register(struct hda_codec_driver *drv, const char *name,
struct module *owner)
{
ALSA: hda - Make snd_hda_bus_type public Define the common hd-audio driver and device types to bind over snd_hda_bus_type publicly. This allows to implement other type of device and driver code over hd-audio bus. Now both struct hda_codec and struct hda_codec_driver inherit these new struct hdac_device and struct hdac_driver, respectively. The bus registration is done in subsys_initcall() to assure it before any other driver registrations. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-02-18 04:46:37 +08:00
drv->core.driver.name = name;
drv->core.driver.owner = owner;
drv->core.driver.bus = &snd_hda_bus_type;
drv->core.driver.probe = hda_codec_driver_probe;
drv->core.driver.remove = hda_codec_driver_remove;
drv->core.driver.shutdown = hda_codec_driver_shutdown;
drv->core.driver.pm = &hda_codec_driver_pm;
drv->core.type = HDA_DEV_LEGACY;
drv->core.match = hda_codec_match;
ALSA: hda - Move some codes up to hdac_bus struct A few basic codes for communicating over HD-audio bus are moved to struct hdac_bus now. It has only command and get_response ops in addition to the unsolicited event handling. Note that the codec-side tracing support is disabled temporarily during this transition due to the code shuffling. It will be re-enabled later once when all pieces are settled down. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-03-03 06:22:59 +08:00
drv->core.unsol_event = hda_codec_unsol_event;
ALSA: hda - Make snd_hda_bus_type public Define the common hd-audio driver and device types to bind over snd_hda_bus_type publicly. This allows to implement other type of device and driver code over hd-audio bus. Now both struct hda_codec and struct hda_codec_driver inherit these new struct hdac_device and struct hdac_driver, respectively. The bus registration is done in subsys_initcall() to assure it before any other driver registrations. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-02-18 04:46:37 +08:00
return driver_register(&drv->core.driver);
ALSA: hda - Bind codecs via standard bus Now we create the standard HD-audio bus (/sys/bus/hdaudio), and bind the codec driver with the codec device over there. This is the first step of the whole transition so that the changes to each codec driver are kept as minimal as possible. Each codec driver needs to register hda_codec_driver struct containing the currently existing preset via the new helper macro module_hda_codec_driver(). The old hda_codec_preset_list is replaced with this infrastructure. The generic parsers (for HDMI and other) are also included in the preset with the special IDs to bind uniquely. In HD-audio core side, the device binding code is split to hda_bind.c. It provides the snd_hda_bus_type implementation to match the codec driver with the given codec vendor ID. It also manages the module auto-loading by itself like before: when the matching isn't found, it tries to probe the corresponding codec modules, and finally falls back to the generic drivers. (The special ID mentioned above is set at this stage.) The only visible change to outside is that the hdaudio sysfs entry now appears in /sys/bus/devices, not as a sound class device. More works to move the suspend/resume and remove ops will be (hopefully) done in later patches. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-02-17 22:25:37 +08:00
}
EXPORT_SYMBOL_GPL(__hda_codec_driver_register);
void hda_codec_driver_unregister(struct hda_codec_driver *drv)
{
ALSA: hda - Make snd_hda_bus_type public Define the common hd-audio driver and device types to bind over snd_hda_bus_type publicly. This allows to implement other type of device and driver code over hd-audio bus. Now both struct hda_codec and struct hda_codec_driver inherit these new struct hdac_device and struct hdac_driver, respectively. The bus registration is done in subsys_initcall() to assure it before any other driver registrations. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-02-18 04:46:37 +08:00
driver_unregister(&drv->core.driver);
ALSA: hda - Bind codecs via standard bus Now we create the standard HD-audio bus (/sys/bus/hdaudio), and bind the codec driver with the codec device over there. This is the first step of the whole transition so that the changes to each codec driver are kept as minimal as possible. Each codec driver needs to register hda_codec_driver struct containing the currently existing preset via the new helper macro module_hda_codec_driver(). The old hda_codec_preset_list is replaced with this infrastructure. The generic parsers (for HDMI and other) are also included in the preset with the special IDs to bind uniquely. In HD-audio core side, the device binding code is split to hda_bind.c. It provides the snd_hda_bus_type implementation to match the codec driver with the given codec vendor ID. It also manages the module auto-loading by itself like before: when the matching isn't found, it tries to probe the corresponding codec modules, and finally falls back to the generic drivers. (The special ID mentioned above is set at this stage.) The only visible change to outside is that the hdaudio sysfs entry now appears in /sys/bus/devices, not as a sound class device. More works to move the suspend/resume and remove ops will be (hopefully) done in later patches. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-02-17 22:25:37 +08:00
}
EXPORT_SYMBOL_GPL(hda_codec_driver_unregister);
static inline bool codec_probed(struct hda_codec *codec)
{
return device_attach(hda_codec_dev(codec)) > 0 && codec->preset;
}
ALSA: hda - Fix missing module loading with model=generic option When the generic codec driver is specified via model option or such, the hda driver doesn't try to load the generic driver module but still loads the codec-specific driver, and this ends up with the binding failure. This patch fixes it by moving the generic module request in the common helper code. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=111021 Cc: <stable@vger.kernel.org> # v4.4+ Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-01-20 22:46:44 +08:00
/* try to auto-load codec module */
static void request_codec_module(struct hda_codec *codec)
ALSA: hda - Bind codecs via standard bus Now we create the standard HD-audio bus (/sys/bus/hdaudio), and bind the codec driver with the codec device over there. This is the first step of the whole transition so that the changes to each codec driver are kept as minimal as possible. Each codec driver needs to register hda_codec_driver struct containing the currently existing preset via the new helper macro module_hda_codec_driver(). The old hda_codec_preset_list is replaced with this infrastructure. The generic parsers (for HDMI and other) are also included in the preset with the special IDs to bind uniquely. In HD-audio core side, the device binding code is split to hda_bind.c. It provides the snd_hda_bus_type implementation to match the codec driver with the given codec vendor ID. It also manages the module auto-loading by itself like before: when the matching isn't found, it tries to probe the corresponding codec modules, and finally falls back to the generic drivers. (The special ID mentioned above is set at this stage.) The only visible change to outside is that the hdaudio sysfs entry now appears in /sys/bus/devices, not as a sound class device. More works to move the suspend/resume and remove ops will be (hopefully) done in later patches. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-02-17 22:25:37 +08:00
{
#ifdef MODULE
ALSA: hda - convert to hda_device_id Finally we have a proper infrastructure to generate the modaliases automatically, let's move to hda_device_id from the legacy hda_codec_preset that contains basically the same information. The patch function hook is stored in driver_data field, which is long, and we need an explicit cast. Other than that, the conversion is mostly straightforward. Each entry is even simplified using a macro, and the lengthy (and error-prone) manual modaliases got removed. As a result, we achieved a quite good diet: 14 files changed, 407 insertions(+), 595 deletions(-) Reviewed-by: Vinod Koul <vinod.koul@intel.com> Tested-by: Subhransu S Prusty <subhransu.s.prusty@intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-10-01 22:20:04 +08:00
char modalias[32];
ALSA: hda - Fix missing module loading with model=generic option When the generic codec driver is specified via model option or such, the hda driver doesn't try to load the generic driver module but still loads the codec-specific driver, and this ends up with the binding failure. This patch fixes it by moving the generic module request in the common helper code. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=111021 Cc: <stable@vger.kernel.org> # v4.4+ Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-01-20 22:46:44 +08:00
const char *mod = NULL;
switch (codec->probe_id) {
case HDA_CODEC_ID_GENERIC_HDMI:
#if IS_MODULE(CONFIG_SND_HDA_CODEC_HDMI)
mod = "snd-hda-codec-hdmi";
#endif
break;
case HDA_CODEC_ID_GENERIC:
#if IS_MODULE(CONFIG_SND_HDA_GENERIC)
mod = "snd-hda-codec-generic";
#endif
break;
default:
snd_hdac_codec_modalias(&codec->core, modalias, sizeof(modalias));
mod = modalias;
break;
}
if (mod)
request_module(mod);
#endif /* MODULE */
}
ALSA: hda - convert to hda_device_id Finally we have a proper infrastructure to generate the modaliases automatically, let's move to hda_device_id from the legacy hda_codec_preset that contains basically the same information. The patch function hook is stored in driver_data field, which is long, and we need an explicit cast. Other than that, the conversion is mostly straightforward. Each entry is even simplified using a macro, and the lengthy (and error-prone) manual modaliases got removed. As a result, we achieved a quite good diet: 14 files changed, 407 insertions(+), 595 deletions(-) Reviewed-by: Vinod Koul <vinod.koul@intel.com> Tested-by: Subhransu S Prusty <subhransu.s.prusty@intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-10-01 22:20:04 +08:00
ALSA: hda - Fix missing module loading with model=generic option When the generic codec driver is specified via model option or such, the hda driver doesn't try to load the generic driver module but still loads the codec-specific driver, and this ends up with the binding failure. This patch fixes it by moving the generic module request in the common helper code. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=111021 Cc: <stable@vger.kernel.org> # v4.4+ Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-01-20 22:46:44 +08:00
/* try to auto-load and bind the codec module */
static void codec_bind_module(struct hda_codec *codec)
{
#ifdef MODULE
request_codec_module(codec);
ALSA: hda - Bind codecs via standard bus Now we create the standard HD-audio bus (/sys/bus/hdaudio), and bind the codec driver with the codec device over there. This is the first step of the whole transition so that the changes to each codec driver are kept as minimal as possible. Each codec driver needs to register hda_codec_driver struct containing the currently existing preset via the new helper macro module_hda_codec_driver(). The old hda_codec_preset_list is replaced with this infrastructure. The generic parsers (for HDMI and other) are also included in the preset with the special IDs to bind uniquely. In HD-audio core side, the device binding code is split to hda_bind.c. It provides the snd_hda_bus_type implementation to match the codec driver with the given codec vendor ID. It also manages the module auto-loading by itself like before: when the matching isn't found, it tries to probe the corresponding codec modules, and finally falls back to the generic drivers. (The special ID mentioned above is set at this stage.) The only visible change to outside is that the hdaudio sysfs entry now appears in /sys/bus/devices, not as a sound class device. More works to move the suspend/resume and remove ops will be (hopefully) done in later patches. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-02-17 22:25:37 +08:00
if (codec_probed(codec))
return;
#endif
}
#if IS_ENABLED(CONFIG_SND_HDA_CODEC_HDMI)
/* if all audio out widgets are digital, let's assume the codec as a HDMI/DP */
static bool is_likely_hdmi_codec(struct hda_codec *codec)
{
ALSA: hda - Move a part of hda_codec stuff into hdac_device Now some codes and functionalities of hda_codec struct are moved to hdac_device struct. A few basic attributes like the codec address, vendor ID number, FG numbers, etc are moved to hdac_device, and they are accessed like codec->core.addr. The basic verb exec functions are moved, too. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-03-03 17:07:24 +08:00
hda_nid_t nid;
ALSA: hda - Bind codecs via standard bus Now we create the standard HD-audio bus (/sys/bus/hdaudio), and bind the codec driver with the codec device over there. This is the first step of the whole transition so that the changes to each codec driver are kept as minimal as possible. Each codec driver needs to register hda_codec_driver struct containing the currently existing preset via the new helper macro module_hda_codec_driver(). The old hda_codec_preset_list is replaced with this infrastructure. The generic parsers (for HDMI and other) are also included in the preset with the special IDs to bind uniquely. In HD-audio core side, the device binding code is split to hda_bind.c. It provides the snd_hda_bus_type implementation to match the codec driver with the given codec vendor ID. It also manages the module auto-loading by itself like before: when the matching isn't found, it tries to probe the corresponding codec modules, and finally falls back to the generic drivers. (The special ID mentioned above is set at this stage.) The only visible change to outside is that the hdaudio sysfs entry now appears in /sys/bus/devices, not as a sound class device. More works to move the suspend/resume and remove ops will be (hopefully) done in later patches. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-02-17 22:25:37 +08:00
ALSA: hda - Move a part of hda_codec stuff into hdac_device Now some codes and functionalities of hda_codec struct are moved to hdac_device struct. A few basic attributes like the codec address, vendor ID number, FG numbers, etc are moved to hdac_device, and they are accessed like codec->core.addr. The basic verb exec functions are moved, too. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-03-03 17:07:24 +08:00
for_each_hda_codec_node(nid, codec) {
ALSA: hda - Bind codecs via standard bus Now we create the standard HD-audio bus (/sys/bus/hdaudio), and bind the codec driver with the codec device over there. This is the first step of the whole transition so that the changes to each codec driver are kept as minimal as possible. Each codec driver needs to register hda_codec_driver struct containing the currently existing preset via the new helper macro module_hda_codec_driver(). The old hda_codec_preset_list is replaced with this infrastructure. The generic parsers (for HDMI and other) are also included in the preset with the special IDs to bind uniquely. In HD-audio core side, the device binding code is split to hda_bind.c. It provides the snd_hda_bus_type implementation to match the codec driver with the given codec vendor ID. It also manages the module auto-loading by itself like before: when the matching isn't found, it tries to probe the corresponding codec modules, and finally falls back to the generic drivers. (The special ID mentioned above is set at this stage.) The only visible change to outside is that the hdaudio sysfs entry now appears in /sys/bus/devices, not as a sound class device. More works to move the suspend/resume and remove ops will be (hopefully) done in later patches. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-02-17 22:25:37 +08:00
unsigned int wcaps = get_wcaps(codec, nid);
switch (get_wcaps_type(wcaps)) {
case AC_WID_AUD_IN:
return false; /* HDMI parser supports only HDMI out */
case AC_WID_AUD_OUT:
if (!(wcaps & AC_WCAP_DIGITAL))
return false;
break;
}
}
return true;
}
#else
/* no HDMI codec parser support */
#define is_likely_hdmi_codec(codec) false
#endif /* CONFIG_SND_HDA_CODEC_HDMI */
static int codec_bind_generic(struct hda_codec *codec)
{
if (codec->probe_id)
return -ENODEV;
if (is_likely_hdmi_codec(codec)) {
codec->probe_id = HDA_CODEC_ID_GENERIC_HDMI;
ALSA: hda - Fix missing module loading with model=generic option When the generic codec driver is specified via model option or such, the hda driver doesn't try to load the generic driver module but still loads the codec-specific driver, and this ends up with the binding failure. This patch fixes it by moving the generic module request in the common helper code. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=111021 Cc: <stable@vger.kernel.org> # v4.4+ Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-01-20 22:46:44 +08:00
request_codec_module(codec);
ALSA: hda - Bind codecs via standard bus Now we create the standard HD-audio bus (/sys/bus/hdaudio), and bind the codec driver with the codec device over there. This is the first step of the whole transition so that the changes to each codec driver are kept as minimal as possible. Each codec driver needs to register hda_codec_driver struct containing the currently existing preset via the new helper macro module_hda_codec_driver(). The old hda_codec_preset_list is replaced with this infrastructure. The generic parsers (for HDMI and other) are also included in the preset with the special IDs to bind uniquely. In HD-audio core side, the device binding code is split to hda_bind.c. It provides the snd_hda_bus_type implementation to match the codec driver with the given codec vendor ID. It also manages the module auto-loading by itself like before: when the matching isn't found, it tries to probe the corresponding codec modules, and finally falls back to the generic drivers. (The special ID mentioned above is set at this stage.) The only visible change to outside is that the hdaudio sysfs entry now appears in /sys/bus/devices, not as a sound class device. More works to move the suspend/resume and remove ops will be (hopefully) done in later patches. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-02-17 22:25:37 +08:00
if (codec_probed(codec))
return 0;
}
codec->probe_id = HDA_CODEC_ID_GENERIC;
ALSA: hda - Fix missing module loading with model=generic option When the generic codec driver is specified via model option or such, the hda driver doesn't try to load the generic driver module but still loads the codec-specific driver, and this ends up with the binding failure. This patch fixes it by moving the generic module request in the common helper code. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=111021 Cc: <stable@vger.kernel.org> # v4.4+ Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-01-20 22:46:44 +08:00
request_codec_module(codec);
ALSA: hda - Bind codecs via standard bus Now we create the standard HD-audio bus (/sys/bus/hdaudio), and bind the codec driver with the codec device over there. This is the first step of the whole transition so that the changes to each codec driver are kept as minimal as possible. Each codec driver needs to register hda_codec_driver struct containing the currently existing preset via the new helper macro module_hda_codec_driver(). The old hda_codec_preset_list is replaced with this infrastructure. The generic parsers (for HDMI and other) are also included in the preset with the special IDs to bind uniquely. In HD-audio core side, the device binding code is split to hda_bind.c. It provides the snd_hda_bus_type implementation to match the codec driver with the given codec vendor ID. It also manages the module auto-loading by itself like before: when the matching isn't found, it tries to probe the corresponding codec modules, and finally falls back to the generic drivers. (The special ID mentioned above is set at this stage.) The only visible change to outside is that the hdaudio sysfs entry now appears in /sys/bus/devices, not as a sound class device. More works to move the suspend/resume and remove ops will be (hopefully) done in later patches. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-02-17 22:25:37 +08:00
if (codec_probed(codec))
return 0;
return -ENODEV;
}
#if IS_ENABLED(CONFIG_SND_HDA_GENERIC)
#define is_generic_config(codec) \
(codec->modelname && !strcmp(codec->modelname, "generic"))
#else
#define is_generic_config(codec) 0
#endif
/**
* snd_hda_codec_configure - (Re-)configure the HD-audio codec
* @codec: the HDA codec
*
* Start parsing of the given codec tree and (re-)initialize the whole
* patch instance.
*
* Returns 0 if successful or a negative error code.
*/
int snd_hda_codec_configure(struct hda_codec *codec)
{
int err;
if (is_generic_config(codec))
codec->probe_id = HDA_CODEC_ID_GENERIC;
else
codec->probe_id = 0;
ALSA: hda - Add widget sysfs tree This patch changes the sysfs files assigned to the codec device on the bus which were formerly identical with hwdep sysfs files. Now it shows only a few core parameter, vendor_id, subsystem_id, revision_id, afg, mfg, vendor_name and chip_name. In addition, now a widget tree is added to the bus device sysfs directory for showing the widget topology and attributes. It's just a flat tree consisting of subdirectories named as the widget NID including various attributes like widget capability bits. The AFG (usually NID 0x01) is always found there, and it contains always amp_in_caps, amp_out_caps and power_caps files. Each of these attributes show a single value. The rest are the widget nodes belonging to that AFG. Note that the child node might not start from 0x02 but from another value like 0x0a. Each child node may contain caps, pin_caps, amp_in_caps, amp_out_caps, power_caps and connections files. The caps (representing the widget capability bits) always contain a value. The rest may contain value(s) if the attribute exists on the node. Only connections file show multiple values while other attributes have zero or one single value. An example of ls -R output is like below: % ls -R /sys/bus/hdaudio/devices/hdaudioC0D0/ /sys/bus/hdaudio/devices/hdaudioC0D0/widgets/: 01/ 04/ 07/ 0a/ 0d/ 10/ 13/ 16/ 19/ 1c/ 1f/ 22/ 02/ 05/ 08/ 0b/ 0e/ 11/ 14/ 17/ 1a/ 1d/ 20/ 23/ 03/ 06/ 09/ 0c/ 0f/ 12/ 15/ 18/ 1b/ 1e/ 21/ /sys/bus/hdaudio/devices/hdaudioC0D0/widgets/01: amp_in_caps amp_out_caps power_caps /sys/bus/hdaudio/devices/hdaudioC0D0/widgets/02: amp_in_caps amp_out_caps caps connections pin_caps pin_cfg power_caps /sys/bus/hdaudio/devices/hdaudioC0D0/widgets/03: ..... Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-02-24 21:59:42 +08:00
err = snd_hdac_device_register(&codec->core);
ALSA: hda - Bind codecs via standard bus Now we create the standard HD-audio bus (/sys/bus/hdaudio), and bind the codec driver with the codec device over there. This is the first step of the whole transition so that the changes to each codec driver are kept as minimal as possible. Each codec driver needs to register hda_codec_driver struct containing the currently existing preset via the new helper macro module_hda_codec_driver(). The old hda_codec_preset_list is replaced with this infrastructure. The generic parsers (for HDMI and other) are also included in the preset with the special IDs to bind uniquely. In HD-audio core side, the device binding code is split to hda_bind.c. It provides the snd_hda_bus_type implementation to match the codec driver with the given codec vendor ID. It also manages the module auto-loading by itself like before: when the matching isn't found, it tries to probe the corresponding codec modules, and finally falls back to the generic drivers. (The special ID mentioned above is set at this stage.) The only visible change to outside is that the hdaudio sysfs entry now appears in /sys/bus/devices, not as a sound class device. More works to move the suspend/resume and remove ops will be (hopefully) done in later patches. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-02-17 22:25:37 +08:00
if (err < 0)
return err;
if (!codec->preset)
codec_bind_module(codec);
if (!codec->preset) {
err = codec_bind_generic(codec);
if (err < 0) {
codec_err(codec, "Unable to bind the codec\n");
goto error;
}
}
return 0;
error:
ALSA: hda - Add widget sysfs tree This patch changes the sysfs files assigned to the codec device on the bus which were formerly identical with hwdep sysfs files. Now it shows only a few core parameter, vendor_id, subsystem_id, revision_id, afg, mfg, vendor_name and chip_name. In addition, now a widget tree is added to the bus device sysfs directory for showing the widget topology and attributes. It's just a flat tree consisting of subdirectories named as the widget NID including various attributes like widget capability bits. The AFG (usually NID 0x01) is always found there, and it contains always amp_in_caps, amp_out_caps and power_caps files. Each of these attributes show a single value. The rest are the widget nodes belonging to that AFG. Note that the child node might not start from 0x02 but from another value like 0x0a. Each child node may contain caps, pin_caps, amp_in_caps, amp_out_caps, power_caps and connections files. The caps (representing the widget capability bits) always contain a value. The rest may contain value(s) if the attribute exists on the node. Only connections file show multiple values while other attributes have zero or one single value. An example of ls -R output is like below: % ls -R /sys/bus/hdaudio/devices/hdaudioC0D0/ /sys/bus/hdaudio/devices/hdaudioC0D0/widgets/: 01/ 04/ 07/ 0a/ 0d/ 10/ 13/ 16/ 19/ 1c/ 1f/ 22/ 02/ 05/ 08/ 0b/ 0e/ 11/ 14/ 17/ 1a/ 1d/ 20/ 23/ 03/ 06/ 09/ 0c/ 0f/ 12/ 15/ 18/ 1b/ 1e/ 21/ /sys/bus/hdaudio/devices/hdaudioC0D0/widgets/01: amp_in_caps amp_out_caps power_caps /sys/bus/hdaudio/devices/hdaudioC0D0/widgets/02: amp_in_caps amp_out_caps caps connections pin_caps pin_cfg power_caps /sys/bus/hdaudio/devices/hdaudioC0D0/widgets/03: ..... Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-02-24 21:59:42 +08:00
snd_hdac_device_unregister(&codec->core);
ALSA: hda - Bind codecs via standard bus Now we create the standard HD-audio bus (/sys/bus/hdaudio), and bind the codec driver with the codec device over there. This is the first step of the whole transition so that the changes to each codec driver are kept as minimal as possible. Each codec driver needs to register hda_codec_driver struct containing the currently existing preset via the new helper macro module_hda_codec_driver(). The old hda_codec_preset_list is replaced with this infrastructure. The generic parsers (for HDMI and other) are also included in the preset with the special IDs to bind uniquely. In HD-audio core side, the device binding code is split to hda_bind.c. It provides the snd_hda_bus_type implementation to match the codec driver with the given codec vendor ID. It also manages the module auto-loading by itself like before: when the matching isn't found, it tries to probe the corresponding codec modules, and finally falls back to the generic drivers. (The special ID mentioned above is set at this stage.) The only visible change to outside is that the hdaudio sysfs entry now appears in /sys/bus/devices, not as a sound class device. More works to move the suspend/resume and remove ops will be (hopefully) done in later patches. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-02-17 22:25:37 +08:00
return err;
}
EXPORT_SYMBOL_GPL(snd_hda_codec_configure);